diff options
Diffstat (limited to 'dts/src/arm64/qcom/msm8916-huawei-g7.dts')
-rw-r--r-- | dts/src/arm64/qcom/msm8916-huawei-g7.dts | 267 |
1 files changed, 122 insertions, 145 deletions
diff --git a/dts/src/arm64/qcom/msm8916-huawei-g7.dts b/dts/src/arm64/qcom/msm8916-huawei-g7.dts index e0075b5741..bf7fc89dd1 100644 --- a/dts/src/arm64/qcom/msm8916-huawei-g7.dts +++ b/dts/src/arm64/qcom/msm8916-huawei-g7.dts @@ -1,5 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only -// Copyright (C) 2021 Stephan Gerhold +/* + * Copyright (C) 2021 Stephan Gerhold + */ /dts-v1/; @@ -8,26 +10,25 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/apq8016-lpass.h> /* * Note: The original firmware from Huawei can only boot 32-bit kernels. - * To boot arm64 kernels it is necessary to flash 64-bit TZ/HYP firmware - * with EDL, e.g. taken from the DragonBoard 410c. This works because Huawei - * forgot to set up (firmware) secure boot for some reason. - * - * Also note that Huawei no longer provides bootloader unlock codes. - * This can be bypassed by patching the bootloader from a custom HYP firmware, - * making it think the bootloader is unlocked. - * - * See: https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7) + * To boot this device tree using arm64 it is necessary to flash 64-bit TZ/HYP + * firmware (e.g. taken from the DragonBoard 410c). + * See https://wiki.postmarketos.org/wiki/Huawei_Ascend_G7_(huawei-g7) + * for suggested installation instructions. */ / { model = "Huawei Ascend G7"; compatible = "huawei,g7", "qcom,msm8916"; + chassis-type = "handset"; aliases { - serial0 = &blsp1_uart2; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart2; }; chosen { @@ -42,9 +43,9 @@ label = "GPIO Buttons"; - volume-up { + button-volume-up { label = "Volume Up"; - gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; }; }; @@ -56,21 +57,21 @@ pinctrl-0 = <&gpio_leds_default>; led-0 { - gpios = <&msmgpio 8 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_RED>; default-state = "off"; function = LED_FUNCTION_INDICATOR; }; led-1 { - gpios = <&msmgpio 9 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 9 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_GREEN>; default-state = "off"; function = LED_FUNCTION_INDICATOR; }; led-2 { - gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>; + gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; color = <LED_COLOR_ID_BLUE>; default-state = "off"; function = LED_FUNCTION_INDICATOR; @@ -79,7 +80,7 @@ usb_id: usb-id { compatible = "linux,extcon-usb-gpio"; - id-gpio = <&msmgpio 117 GPIO_ACTIVE_HIGH>; + id-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb_id_default>; }; @@ -95,7 +96,7 @@ vdd-supply = <&pm8916_l17>; vid-supply = <&pm8916_l6>; - reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>; + reset-gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&mag_reset_default>; @@ -105,7 +106,7 @@ compatible = "kionix,kx023-1025"; reg = <0x1e>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <115 IRQ_TYPE_EDGE_RISING>; vdd-supply = <&pm8916_l17>; @@ -123,7 +124,7 @@ compatible = "avago,apds9930"; reg = <0x39>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <113 IRQ_TYPE_EDGE_FALLING>; vdd-supply = <&pm8916_l17>; @@ -147,7 +148,7 @@ regulator-name = "outp"; regulator-min-microvolt = <5400000>; regulator-max-microvolt = <5400000>; - enable-gpios = <&msmgpio 97 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 97 GPIO_ACTIVE_HIGH>; regulator-active-discharge = <1>; }; @@ -155,7 +156,7 @@ regulator-name = "outn"; regulator-min-microvolt = <5400000>; regulator-max-microvolt = <5400000>; - enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; regulator-active-discharge = <1>; }; }; @@ -170,7 +171,7 @@ #address-cells = <1>; #size-cells = <0>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <13 IRQ_TYPE_EDGE_FALLING>; vdd-supply = <&pm8916_l17>; @@ -200,19 +201,40 @@ compatible = "nxp,pn547", "nxp,nxp-nci-i2c"; reg = <0x28>; - interrupt-parent = <&msmgpio>; + interrupt-parent = <&tlmm>; interrupts = <21 IRQ_TYPE_EDGE_RISING>; - enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>; - firmware-gpios = <&msmgpio 2 GPIO_ACTIVE_HIGH>; + enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&nfc_default>; }; }; -&blsp1_uart2 { +&blsp_uart2 { + status = "okay"; +}; + +&lpass { + status = "okay"; +}; + +&lpass_codec { + status = "okay"; +}; + +&pm8916_codec { status = "okay"; + qcom,micbias-lvl = <2800>; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + qcom,hphl-jack-type-normally-open; +}; + +&pm8916_l8 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; }; &pm8916_resin { @@ -220,31 +242,35 @@ linux,code = <KEY_VOLUMEDOWN>; }; -&pm8916_vib { - status = "okay"; +&pm8916_rpm_regulators { + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; }; -&pronto { +&pm8916_vib { status = "okay"; }; &sdhc_1 { status = "okay"; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; }; &sdhc_2 { status = "okay"; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdhc2_cd_default>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdhc2_cd_default>; + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; /* - * The Huawei device tree sets cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>. + * The Huawei device tree sets cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>. * However, gpio38 does not change its state when inserting/removing the * SD card, it's just low all the time. The Huawei kernel seems to use * polling for SD card detection instead. @@ -256,123 +282,74 @@ * Maybe Huawei decided to replace the second SIM card slot with the * SD card slot and forgot to re-route to gpio38. */ - cd-gpios = <&msmgpio 56 GPIO_ACTIVE_LOW>; + cd-gpios = <&tlmm 56 GPIO_ACTIVE_LOW>; }; -&usb { +&sound { status = "okay"; - extcon = <&usb_id>, <&usb_id>; -}; - -&usb_hs_phy { - extcon = <&usb_id>; -}; - -&smd_rpm_regulators { - vdd_l1_l2_l3-supply = <&pm8916_s3>; - vdd_l4_l5_l6-supply = <&pm8916_s4>; - vdd_l7-supply = <&pm8916_s4>; - - s3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2100000>; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - l8 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - }; + model = "msm8916"; + audio-routing = + "AMIC1", "MIC BIAS External1", + "AMIC2", "MIC BIAS External2", + "AMIC3", "MIC BIAS External1"; - l9 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_default>; + pinctrl-1 = <&cdc_pdm_sleep>; - l10 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2800000>; + primary-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; + }; }; - l11 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - regulator-allow-set-load; - regulator-system-load = <200000>; + tertiary-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; + }; }; +}; - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; +&usb { + status = "okay"; + extcon = <&usb_id>, <&usb_id>; +}; - l13 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - }; +&usb_hs_phy { + extcon = <&usb_id>; +}; - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; +&venus { + status = "okay"; +}; - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; +&venus_mem { + status = "okay"; +}; - l16 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; +&wcnss { + status = "okay"; +}; - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; - l18 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; +&wcnss_mem { + status = "okay"; }; -&msmgpio { - accel_irq_default: accel-irq-default { +&tlmm { + accel_irq_default: accel-irq-default-state { pins = "gpio115"; function = "gpio"; @@ -380,7 +357,7 @@ bias-disable; }; - gpio_keys_default: gpio-keys-default { + gpio_keys_default: gpio-keys-default-state { pins = "gpio107"; function = "gpio"; @@ -388,7 +365,7 @@ bias-pull-up; }; - gpio_leds_default: gpio-leds-default { + gpio_leds_default: gpio-leds-default-state { pins = "gpio8", "gpio9", "gpio10"; function = "gpio"; @@ -396,7 +373,7 @@ bias-disable; }; - nfc_default: nfc-default { + nfc_default: nfc-default-state { pins = "gpio2", "gpio20", "gpio21"; function = "gpio"; @@ -404,7 +381,7 @@ bias-disable; }; - mag_reset_default: mag-reset-default { + mag_reset_default: mag-reset-default-state { pins = "gpio36"; function = "gpio"; @@ -412,7 +389,7 @@ bias-disable; }; - prox_irq_default: prox-irq-default { + prox_irq_default: prox-irq-default-state { pins = "gpio113"; function = "gpio"; @@ -420,7 +397,7 @@ bias-disable; }; - reg_lcd_en_default: reg-lcd-en-default { + reg_lcd_en_default: reg-lcd-en-default-state { pins = "gpio32", "gpio97"; function = "gpio"; @@ -428,7 +405,7 @@ bias-disable; }; - sdhc2_cd_default: sdhc2-cd-default { + sdc2_cd_default: sdc2-cd-default-state { pins = "gpio56"; function = "gpio"; @@ -436,7 +413,7 @@ bias-disable; }; - ts_irq_default: ts-irq-default { + ts_irq_default: ts-irq-default-state { pins = "gpio13"; function = "gpio"; @@ -444,7 +421,7 @@ bias-disable; }; - usb_id_default: usb-id-default { + usb_id_default: usb-id-default-state { pins = "gpio117"; function = "gpio"; |