diff options
Diffstat (limited to 'dts/src/arm64/qcom/msm8916-longcheer-l8150.dts')
| -rw-r--r-- | dts/src/arm64/qcom/msm8916-longcheer-l8150.dts | 181 |
1 files changed, 171 insertions, 10 deletions
diff --git a/dts/src/arm64/qcom/msm8916-longcheer-l8150.dts b/dts/src/arm64/qcom/msm8916-longcheer-l8150.dts index b9d3c5d98d..1e893c0b6f 100644 --- a/dts/src/arm64/qcom/msm8916-longcheer-l8150.dts +++ b/dts/src/arm64/qcom/msm8916-longcheer-l8150.dts @@ -5,6 +5,8 @@ #include "msm8916-pm8916.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> / { model = "Longcheer L8150"; @@ -50,6 +52,139 @@ linux,code = <KEY_VOLUMEUP>; }; }; + + reg_ctp: regulator-ctp { + compatible = "regulator-fixed"; + regulator-name = "ctp"; + + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + gpio = <&msmgpio 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&ctp_pwr_en_default>; + }; + + flash-led-controller { + compatible = "sgmicro,sgm3140"; + flash-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>; + enable-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&camera_flash_default>; + + flash_led: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + flash-max-timeout-us = <250000>; + }; + }; +}; + +&blsp_i2c1 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + #address-cells = <1>; + #size-cells = <0>; + + vcc-supply = <&pm8916_l17>; + + led@0 { + reg = <0>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RED>; + }; + + led@1 { + reg = <1>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_GREEN>; + }; + + led@2 { + reg = <2>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_BLUE>; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + accelerometer@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + }; + + magnetometer@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; + + gyroscope@68 { + compatible = "bosch,bmg160"; + reg = <0x68>; + + interrupt-parent = <&msmgpio>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&gyro_int_default>; + + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + }; +}; + +&blsp_i2c5 { + status = "okay"; + + rmi4@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <®_ctp>; + vio-supply = <&pm8916_l6>; + + pinctrl-names = "default"; + pinctrl-0 = <&tp_int_default>; + + syna,startup-delay-ms = <10>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; // Allow sleeping + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; // Touchscreen + }; + }; }; &blsp1_uart2 { @@ -61,6 +196,10 @@ linux,code = <KEY_VOLUMEDOWN>; }; +&pm8916_vib { + status = "okay"; +}; + &pronto { status = "okay"; }; @@ -98,11 +237,6 @@ vdd_l4_l5_l6-supply = <&pm8916_s4>; vdd_l7-supply = <&pm8916_s4>; - s1 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1300000>; - }; - s3 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1300000>; @@ -123,11 +257,6 @@ regulator-max-microvolt = <1200000>; }; - l3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1287500>; - }; - l4 { regulator-min-microvolt = <2050000>; regulator-max-microvolt = <2050000>; @@ -207,6 +336,22 @@ }; &msmgpio { + camera_flash_default: camera-flash-default { + pins = "gpio31", "gpio32"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + ctp_pwr_en_default: ctp-pwr-en-default { + pins = "gpio17"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + gpio_keys_default: gpio-keys-default { pins = "gpio107"; function = "gpio"; @@ -215,6 +360,22 @@ bias-pull-up; }; + gyro_int_default: gyro-int-default { + pins = "gpio23"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tp_int_default: tp-int-default { + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + usb_vbus_default: usb-vbus-default { pins = "gpio62"; function = "gpio"; |