summaryrefslogtreecommitdiffstats
path: root/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi')
-rw-r--r--dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi380
1 files changed, 214 insertions, 166 deletions
diff --git a/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi b/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
index 9b4b7de7ce..2937495940 100644
--- a/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
+++ b/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi
@@ -1,14 +1,19 @@
// SPDX-License-Identifier: GPL-2.0-only
#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/apq8016-lpass.h>
/ {
aliases {
- serial0 = &blsp1_uart2;
+ mmc0 = &sdhc_1; /* eMMC */
+ mmc1 = &sdhc_2; /* SD card */
+ serial0 = &blsp_uart2;
};
chosen {
@@ -23,6 +28,17 @@
};
};
+ clk_pwm: pwm {
+ compatible = "clk-pwm";
+ #pwm-cells = <2>;
+
+ clocks = <&gcc GCC_GP2_CLK>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&motor_pwm_default>;
+ status = "disabled";
+ };
+
gpio-keys {
compatible = "gpio-keys";
@@ -31,15 +47,15 @@
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
- gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
- home {
+ button-home {
label = "Home";
- gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
+ gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOMEPAGE>;
};
};
@@ -52,22 +68,40 @@
label = "GPIO Hall Effect Sensor";
- hall-sensor {
+ event-hall-sensor {
label = "Hall Effect Sensor";
- gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
+ gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
linux,can-disable;
};
};
- reg_vdd_tsp: regulator-vdd-tsp {
+ /*
+ * NOTE: A5 connects GPIO 76 to a reglator powering the motor
+ * driver IC but A3 connects the same signal to an ENABLE pin of
+ * the driver.
+ */
+ reg_motor_vdd: regulator-motor-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "motor_vdd";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&motor_en_default>;
+ };
+
+ reg_vdd_tsp_a: regulator-vdd-tsp-a {
compatible = "regulator-fixed";
- regulator-name = "vdd_tsp";
+ regulator-name = "vdd_tsp_a";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
+ gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -76,8 +110,8 @@
i2c-muic {
compatible = "i2c-gpio";
- sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
pinctrl-names = "default";
pinctrl-0 = <&muic_i2c_default>;
@@ -89,7 +123,7 @@
compatible = "siliconmitus,sm5502-muic";
reg = <0x25>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
@@ -99,8 +133,8 @@
i2c-tkey {
compatible = "i2c-gpio";
- sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
pinctrl-names = "default";
pinctrl-0 = <&tkey_i2c_default>;
@@ -113,7 +147,7 @@
compatible = "coreriver,tc360-touchkey";
reg = <0x20>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
/* vcc/vdd-supply are board-specific */
@@ -128,8 +162,8 @@
i2c-nfc {
compatible = "i2c-gpio";
- sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
pinctrl-names = "default";
pinctrl-0 = <&nfc_i2c_default>;
@@ -141,11 +175,11 @@
compatible = "samsung,s3fwrn5-i2c";
reg = <0x27>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <21 IRQ_TYPE_EDGE_RISING>;
- en-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
- wake-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>;
+ en-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
clocks = <&rpmcc RPM_SMD_BB_CLK2_PIN>;
@@ -153,6 +187,28 @@
pinctrl-0 = <&nfc_default &nfc_clk_req>;
};
};
+
+ vibrator: vibrator {
+ compatible = "pwm-vibrator";
+
+ pwms = <&clk_pwm 0 100000>;
+ pwm-names = "enable";
+
+ vcc-supply = <&reg_motor_vdd>;
+ status = "disabled";
+ };
+};
+
+&blsp_i2c1 {
+ status = "okay";
+
+ speaker_codec: audio-codec@34 {
+ compatible = "nxp,tfa9895";
+ reg = <0x34>;
+ vddd-supply = <&pm8916_l5>;
+ sound-name-prefix = "Speaker";
+ #sound-dai-cells = <0>;
+ };
};
&blsp_i2c2 {
@@ -161,7 +217,7 @@
accelerometer: accelerometer@10 {
compatible = "bosch,bmc150_accel";
reg = <0x10>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <115 IRQ_TYPE_EDGE_RISING>;
vdd-supply = <&pm8916_l17>;
@@ -186,7 +242,7 @@
battery@35 {
compatible = "richtek,rt5033-battery";
reg = <0x35>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
pinctrl-names = "default";
@@ -194,18 +250,45 @@
};
};
-&blsp1_uart2 {
+&blsp_uart2 {
status = "okay";
};
-&dsi0 {
+&gpu {
+ status = "okay";
+};
+
+/*
+ * For some reason the speaker amplifier is connected to the second SD line
+ * (MI2S_2_D1) instead of the first (MI2S_2_D0). This must be configured in the
+ * device tree, otherwise audio will seemingly play fine on the wrong SD line
+ * but the speaker stays silent.
+ *
+ * When routing audio via QDSP6 (the default) the &lpass node is reserved and
+ * the definitions from &q6afedai are used. When the modem is disabled audio can
+ * be alternatively routed directly to the LPASS hardware with reduced latency.
+ * The definitions for &lpass are here for completeness to simplify changing the
+ * setup with minor changes to the DT (either manually or with DT overlays).
+ */
+&lpass {
+ dai-link@3 {
+ reg = <MI2S_QUATERNARY>;
+ qcom,playback-sd-lines = <1>;
+ };
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mdss_default>;
pinctrl-1 = <&mdss_sleep>;
};
-&mdss {
- status = "okay";
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5400000>;
};
&pm8916_resin {
@@ -213,26 +296,58 @@
linux,code = <KEY_VOLUMEDOWN>;
};
-&pronto {
- status = "okay";
+&pm8916_rpm_regulators {
+ pm8916_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+};
+
+&q6afedai {
+ dai@22 {
+ reg = <QUATERNARY_MI2S_RX>;
+ qcom,sd-lines = <1>;
+ };
};
&sdhc_1 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+ pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
- cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+ model = "samsung-a2015";
+ audio-routing =
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+
+ pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>;
+ pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ sound_link_backend2: backend2-dai-link {
+ link-name = "Quaternary MI2S";
+
+ cpu {
+ sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+ };
+ platform {
+ sound-dai = <&q6routing>;
+ };
+ codec {
+ sound-dai = <&speaker_codec>;
+ };
+ };
};
&usb {
@@ -244,111 +359,16 @@
extcon = <&muic>;
};
-&smd_rpm_regulators {
- vdd_l1_l2_l3-supply = <&pm8916_s3>;
- vdd_l4_l5_l6-supply = <&pm8916_s4>;
- vdd_l7-supply = <&pm8916_s4>;
-
- s3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1300000>;
- };
-
- s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2100000>;
- };
-
- l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l4 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l8 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2900000>;
- };
-
- l9 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l10 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2800000>;
- };
-
- l11 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- regulator-allow-set-load;
- regulator-system-load = <200000>;
- };
-
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l13 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- };
-
- l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l16 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l17 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
+&venus {
+ status = "okay";
+};
- l18 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
+&venus_mem {
+ status = "okay";
};
-&msmgpio {
- accel_int_default: accel-int-default {
+&tlmm {
+ accel_int_default: accel-int-default-state {
pins = "gpio115";
function = "gpio";
@@ -356,7 +376,7 @@
bias-disable;
};
- fg_alert_default: fg-alert-default {
+ fg_alert_default: fg-alert-default-state {
pins = "gpio121";
function = "gpio";
@@ -364,7 +384,7 @@
bias-disable;
};
- gpio_keys_default: gpio-keys-default {
+ gpio_keys_default: gpio-keys-default-state {
pins = "gpio107", "gpio109";
function = "gpio";
@@ -372,7 +392,7 @@
bias-pull-up;
};
- gpio_hall_sensor_default: gpio-hall-sensor-default {
+ gpio_hall_sensor_default: gpio-hall-sensor-default-state {
pins = "gpio52";
function = "gpio";
@@ -380,47 +400,60 @@
bias-disable;
};
- mdss {
- mdss_default: mdss-default {
- pins = "gpio25";
- function = "gpio";
+ mdss_default: mdss-default-state {
+ pins = "gpio25";
+ function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- mdss_sleep: mdss-sleep {
- pins = "gpio25";
- function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ mdss_sleep: mdss-sleep-state {
+ pins = "gpio25";
+ function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
+ drive-strength = <2>;
+ bias-pull-down;
};
- muic_i2c_default: muic-i2c-default {
- pins = "gpio105", "gpio106";
+ motor_en_default: motor-en-default-state {
+ pins = "gpio76";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- muic_int_default: muic-int-default {
- pins = "gpio12";
+ motor_pwm_default: motor-pwm-default-state {
+ pins = "gpio50";
+ function = "gcc_gp2_clk_a";
+ };
+
+ muic_i2c_default: muic-i2c-default-state {
+ pins = "gpio105", "gpio106";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
- nfc_default: nfc-default {
- pins = "gpio20", "gpio49";
+ muic_int_default: muic-int-default-state {
+ pins = "gpio12";
function = "gpio";
drive-strength = <2>;
bias-disable;
+ };
- irq {
+ nfc_default: nfc-default-state {
+ nfc-pins {
+ pins = "gpio20", "gpio49";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ irq-pins {
pins = "gpio21";
function = "gpio";
@@ -429,7 +462,7 @@
};
};
- nfc_i2c_default: nfc-i2c-default {
+ nfc_i2c_default: nfc-i2c-default-state {
pins = "gpio0", "gpio1";
function = "gpio";
@@ -437,7 +470,14 @@
bias-disable;
};
- tkey_default: tkey-default {
+ sdc2_cd_default: sdc2-cd-default-state {
+ pins = "gpio38";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tkey_default: tkey-default-state {
pins = "gpio98";
function = "gpio";
@@ -445,7 +485,7 @@
bias-disable;
};
- tkey_i2c_default: tkey-i2c-default {
+ tkey_i2c_default: tkey-i2c-default-state {
pins = "gpio16", "gpio17";
function = "gpio";
@@ -453,17 +493,25 @@
bias-disable;
};
- tsp_en_default: tsp-en-default {
+ tsp_en_default: tsp-en-default-state {
pins = "gpio73";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
+
+ ts_int_default: ts-int-default-state {
+ pins = "gpio13";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
};
&pm8916_gpios {
- nfc_clk_req: nfc-clk-req {
+ nfc_clk_req: nfc-clk-req-state {
pins = "gpio2";
function = "func1";
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-24 18:01:57 +0000