summaryrefslogtreecommitdiffstats
path: root/dts/src/arm64/qcom/msm8916-samsung-serranove.dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm64/qcom/msm8916-samsung-serranove.dts')
-rw-r--r--dts/src/arm64/qcom/msm8916-samsung-serranove.dts313
1 files changed, 151 insertions, 162 deletions
diff --git a/dts/src/arm64/qcom/msm8916-samsung-serranove.dts b/dts/src/arm64/qcom/msm8916-samsung-serranove.dts
index 58dfbfff4c..5ce8f1350a 100644
--- a/dts/src/arm64/qcom/msm8916-samsung-serranove.dts
+++ b/dts/src/arm64/qcom/msm8916-samsung-serranove.dts
@@ -1,9 +1,13 @@
// SPDX-License-Identifier: GPL-2.0-only
-// Copyright (C) 2019 Stephan Gerhold
+/*
+ * Copyright (C) 2019 Stephan Gerhold
+ */
/dts-v1/;
#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
@@ -26,7 +30,9 @@
chassis-type = "handset";
aliases {
- serial0 = &blsp1_uart2;
+ mmc0 = &sdhc_1; /* eMMC */
+ mmc1 = &sdhc_2; /* SD card */
+ serial0 = &blsp_uart2;
};
chosen {
@@ -49,15 +55,15 @@
label = "GPIO Buttons";
- volume-up {
+ button-volume-up {
label = "Volume Up";
- gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
- home {
+ button-home {
label = "Home";
- gpios = <&msmgpio 109 GPIO_ACTIVE_LOW>;
+ gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOMEPAGE>;
};
};
@@ -70,9 +76,9 @@
label = "GPIO Hall Effect Sensor";
- hall-sensor {
+ event-hall-sensor {
label = "Hall Effect Sensor";
- gpios = <&msmgpio 52 GPIO_ACTIVE_LOW>;
+ gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
linux,can-disable;
@@ -85,7 +91,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&msmgpio 73 GPIO_ACTIVE_HIGH>;
+ gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -98,7 +104,7 @@
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
+ gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -111,7 +117,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
+ gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
@@ -120,8 +126,8 @@
i2c-muic {
compatible = "i2c-gpio";
- sda-gpios = <&msmgpio 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&msmgpio 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
pinctrl-names = "default";
pinctrl-0 = <&muic_i2c_default>;
@@ -133,18 +139,24 @@
compatible = "siliconmitus,sm5504-muic";
reg = <0x14>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&muic_irq_default>;
+
+ usb_con: connector {
+ compatible = "usb-b-connector";
+ label = "micro-USB";
+ type = "micro";
+ };
};
};
i2c-tkey {
compatible = "i2c-gpio";
- sda-gpios = <&msmgpio 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&msmgpio 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
pinctrl-names = "default";
pinctrl-0 = <&tkey_i2c_default>;
@@ -156,7 +168,7 @@
compatible = "coreriver,tc360-touchkey";
reg = <0x20>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <98 IRQ_TYPE_EDGE_FALLING>;
vcc-supply = <&reg_touch_key>;
@@ -172,8 +184,8 @@
i2c-nfc {
compatible = "i2c-gpio";
- sda-gpios = <&msmgpio 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
- scl-gpios = <&msmgpio 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
pinctrl-names = "default";
pinctrl-0 = <&nfc_i2c_default>;
@@ -185,16 +197,25 @@
compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
reg = <0x2b>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <21 IRQ_TYPE_EDGE_RISING>;
- enable-gpios = <&msmgpio 20 GPIO_ACTIVE_HIGH>;
- firmware-gpios = <&msmgpio 49 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+ firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&nfc_default>;
};
};
+
+ battery: battery {
+ compatible = "simple-battery";
+ precharge-current-microamp = <450000>;
+ constant-charge-current-max-microamp = <1000000>;
+ charge-term-current-microamp = <150000>;
+ precharge-upper-limit-microvolt = <3500000>;
+ constant-charge-voltage-max-microvolt = <4350000>;
+ };
};
&blsp_i2c2 {
@@ -204,26 +225,37 @@
compatible = "st,lsm6ds3";
reg = <0x6b>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <115 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&imu_irq_default>;
};
+
+ magnetometer@2e {
+ compatible = "yamaha,yas537";
+ reg = <0x2e>;
+
+ mount-matrix = "0", "1", "0",
+ "1", "0", "0",
+ "0", "0", "-1";
+ };
};
&blsp_i2c4 {
status = "okay";
- battery@35 {
+ fuel-gauge@35 {
compatible = "richtek,rt5033-battery";
reg = <0x35>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&fg_alert_default>;
+
+ power-supplies = <&rt5033_charger>;
};
};
@@ -234,7 +266,7 @@
compatible = "zinitix,bt541";
reg = <0x20>;
- interrupt-parent = <&msmgpio>;
+ interrupt-parent = <&tlmm>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
touchscreen-size-x = <540>;
@@ -248,42 +280,66 @@
};
};
-&blsp1_uart2 {
+&blsp_i2c6 {
status = "okay";
+
+ pmic@34 {
+ compatible = "richtek,rt5033";
+ reg = <0x34>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <62 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_default>;
+
+ regulators {
+ rt5033_reg_safe_ldo: SAFE_LDO {
+ regulator-min-microvolt = <4900000>;
+ regulator-max-microvolt = <4900000>;
+ regulator-always-on;
+ };
+ rt5033_reg_ldo: LDO {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ rt5033_reg_buck: BUCK {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ };
+
+ rt5033_charger: charger {
+ compatible = "richtek,rt5033-charger";
+ monitored-battery = <&battery>;
+ richtek,usb-connector = <&usb_con>;
+ };
+ };
};
-&pm8916_resin {
+&blsp_uart2 {
status = "okay";
- linux,code = <KEY_VOLUMEDOWN>;
};
-&pm8916_vib {
- status = "okay";
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5a00000>;
};
-&pronto {
+&pm8916_resin {
status = "okay";
+ linux,code = <KEY_VOLUMEDOWN>;
+};
- iris {
- compatible = "qcom,wcn3660b";
- };
+&pm8916_vib {
+ status = "okay";
};
&sdhc_1 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
- pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
};
&sdhc_2 {
status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
- pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
-
non-removable;
/*
@@ -300,6 +356,13 @@
no-1-8-v;
};
+&sound {
+ audio-routing =
+ "AMIC1", "MIC BIAS External1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS External1";
+};
+
&usb {
status = "okay";
extcon = <&muic>, <&muic>;
@@ -309,111 +372,28 @@
extcon = <&muic>;
};
-&smd_rpm_regulators {
- vdd_l1_l2_l3-supply = <&pm8916_s3>;
- vdd_l4_l5_l6-supply = <&pm8916_s4>;
- vdd_l7-supply = <&pm8916_s4>;
-
- s3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1300000>;
- };
-
- s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2100000>;
- };
-
- l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l4 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l8 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2900000>;
- };
-
- l9 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- l10 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2800000>;
- };
-
- l11 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- regulator-allow-set-load;
- regulator-system-load = <200000>;
- };
-
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- l13 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- };
-
- l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
+&venus {
+ status = "okay";
+};
- l15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
+&venus_mem {
+ status = "okay";
+};
- l16 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
+&wcnss {
+ status = "okay";
+};
- l17 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
+&wcnss_iris {
+ compatible = "qcom,wcn3660b";
+};
- l18 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
+&wcnss_mem {
+ status = "okay";
};
-&msmgpio {
- fg_alert_default: fg-alert-default {
+&tlmm {
+ fg_alert_default: fg-alert-default-state {
pins = "gpio121";
function = "gpio";
@@ -421,7 +401,7 @@
bias-disable;
};
- gpio_keys_default: gpio-keys-default {
+ gpio_keys_default: gpio-keys-default-state {
pins = "gpio107", "gpio109";
function = "gpio";
@@ -429,7 +409,7 @@
bias-pull-up;
};
- gpio_hall_sensor_default: gpio-hall-sensor-default {
+ gpio_hall_sensor_default: gpio-hall-sensor-default-state {
pins = "gpio52";
function = "gpio";
@@ -437,7 +417,7 @@
bias-disable;
};
- imu_irq_default: imu-irq-default {
+ imu_irq_default: imu-irq-default-state {
pins = "gpio115";
function = "gpio";
@@ -445,7 +425,7 @@
bias-disable;
};
- muic_i2c_default: muic-i2c-default {
+ muic_i2c_default: muic-i2c-default-state {
pins = "gpio105", "gpio106";
function = "gpio";
@@ -453,7 +433,7 @@
bias-disable;
};
- muic_irq_default: muic-irq-default {
+ muic_irq_default: muic-irq-default-state {
pins = "gpio12";
function = "gpio";
@@ -461,14 +441,15 @@
bias-disable;
};
- nfc_default: nfc-default {
- pins = "gpio20", "gpio49";
- function = "gpio";
-
- drive-strength = <2>;
- bias-disable;
+ nfc_default: nfc-default-state {
+ nfc-pins {
+ pins = "gpio20", "gpio49";
+ function = "gpio";
- irq {
+ drive-strength = <2>;
+ bias-disable;
+ };
+ irq-pins {
pins = "gpio21";
function = "gpio";
@@ -477,7 +458,7 @@
};
};
- nfc_i2c_default: nfc-i2c-default {
+ nfc_i2c_default: nfc-i2c-default-state {
pins = "gpio0", "gpio1";
function = "gpio";
@@ -485,7 +466,15 @@
bias-disable;
};
- tkey_default: tkey-default {
+ pmic_int_default: pmic-int-default-state {
+ pins = "gpio62";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tkey_default: tkey-default-state {
pins = "gpio98";
function = "gpio";
@@ -493,7 +482,7 @@
bias-disable;
};
- tkey_en_default: tkey-en-default {
+ tkey_en_default: tkey-en-default-state {
pins = "gpio86";
function = "gpio";
@@ -501,7 +490,7 @@
bias-disable;
};
- tkey_i2c_default: tkey-i2c-default {
+ tkey_i2c_default: tkey-i2c-default-state {
pins = "gpio16", "gpio17";
function = "gpio";
@@ -509,7 +498,7 @@
bias-disable;
};
- tkey_led_en_default: tkey-led-en-default {
+ tkey_led_en_default: tkey-led-en-default-state {
pins = "gpio60";
function = "gpio";
@@ -517,7 +506,7 @@
bias-disable;
};
- tsp_en_default: tsp-en-default {
+ tsp_en_default: tsp-en-default-state {
pins = "gpio73";
function = "gpio";
@@ -525,7 +514,7 @@
bias-disable;
};
- tsp_irq_default: tsp-irq-default {
+ tsp_irq_default: tsp-irq-default-state {
pins = "gpio13";
function = "gpio";
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-18 02:08:00 +0000