diff options
Diffstat (limited to 'dts/src/arm64/qcom/msm8953.dtsi')
| -rw-r--r-- | dts/src/arm64/qcom/msm8953.dtsi | 2024 |
1 files changed, 2024 insertions, 0 deletions
diff --git a/dts/src/arm64/qcom/msm8953.dtsi b/dts/src/arm64/qcom/msm8953.dtsi new file mode 100644 index 0000000000..ad2f8cf9c9 --- /dev/null +++ b/dts/src/arm64/qcom/msm8953.dtsi @@ -0,0 +1,2024 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2022, The Linux Foundation. All rights reserved. */ + +#include <dt-bindings/clock/qcom,gcc-msm8953.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/soc/qcom,apr.h> +#include <dt-bindings/sound/qcom,q6afe.h> +#include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo"; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_0>; + #cooling-cells = <2>; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x101>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x102>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x103>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + next-level-cache = <&L2_1>; + #cooling-cells = <2>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + core2 { + cpu = <&CPU2>; + }; + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + core1 { + cpu = <&CPU5>; + }; + core2 { + cpu = <&CPU6>; + }; + core3 { + cpu = <&CPU7>; + }; + }; + }; + + L2_0: l2-cache-0 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + + L2_1: l2-cache-1 { + compatible = "cache"; + cache-level = <2>; + cache-unified; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8953", "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + #reset-cells = <1>; + }; + }; + + memory@10000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0x10000000 0 0>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + rpm: remoteproc { + compatible = "qcom,msm8953-rpm-proc", "qcom,rpm-proc"; + + smd-edge { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8953"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8953", "qcom,rpmcc"; + clocks = <&xo_board>; + clock-names = "xo"; + #clock-cells = <1>; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8953-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <RPM_SMD_LEVEL_RETENTION>; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = <RPM_SMD_LEVEL_MIN_SVS>; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = <RPM_SMD_LEVEL_LOW_SVS>; + }; + + rpmpd_opp_svs: opp5 { + opp-level = <RPM_SMD_LEVEL_SVS>; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = <RPM_SMD_LEVEL_SVS_PLUS>; + }; + + rpmpd_opp_nom: opp7 { + opp-level = <RPM_SMD_LEVEL_NOM>; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = <RPM_SMD_LEVEL_NOM_PLUS>; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = <RPM_SMD_LEVEL_TURBO>; + }; + }; + }; + }; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + zap_shader_region: zap@81800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x81800000 0x0 0x2000>; + no-map; + }; + + qseecom_mem: qseecom@85b00000 { + reg = <0x0 0x85b00000 0x0 0x800000>; + no-map; + }; + + smem_mem: smem@86300000 { + compatible = "qcom,smem"; + reg = <0x0 0x86300000 0x0 0x100000>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + hwlocks = <&tcsr_mutex 3>; + no-map; + }; + + reserved@86400000 { + reg = <0x0 0x86400000 0x0 0x400000>; + no-map; + }; + + mpss_mem: mpss@86c00000 { + reg = <0x0 0x86c00000 0x0 0x6a00000>; + no-map; + }; + + adsp_fw_mem: adsp@8d600000 { + reg = <0x0 0x8d600000 0x0 0x1100000>; + no-map; + }; + + wcnss_fw_mem: wcnss@8e700000 { + reg = <0x0 0x8e700000 0x0 0x700000>; + no-map; + }; + + dfps_data_mem: dfps-data@90000000 { + reg = <0 0x90000000 0 0x1000>; + no-map; + }; + + cont_splash_mem: cont-splash@90001000 { + reg = <0x0 0x90001000 0x0 0x13ff000>; + no-map; + }; + + venus_mem: venus@91400000 { + reg = <0x0 0x91400000 0x0 0x700000>; + no-map; + }; + + mba_mem: mba@92000000 { + reg = <0x0 0x92000000 0x0 0x100000>; + no-map; + }; + + rmtfs@f2d00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0xf2d00000 0x0 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + }; + + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>; + + mboxes = <&apcs 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + smp2p_modem_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + smp2p_modem_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + smp2p_wcnss_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + smp2p_wcnss_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs 8 13>; + qcom,ipc-3 = <&apcs 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + + modem_smsm: modem@1 { + reg = <1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x8000>; + }; + + hsusb_phy: phy@79000 { + compatible = "qcom,msm8953-qusb2-phy"; + reg = <0x00079000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, + <&gcc GCC_QUSB_REF_CLK>; + clock-names = "cfg_ahb", "ref"; + + qcom,tcsr-syscon = <&tcsr_phy_clk_scheme_sel>; + + resets = <&gcc GCC_QUSB2_PHY_BCR>; + + status = "disabled"; + }; + + rng@e3000 { + compatible = "qcom,prng"; + reg = <0x000e3000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + tsens0: thermal-sensor@4a9000 { + compatible = "qcom,msm8953-tsens", "qcom,tsens-v2"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x004ab000 0x4>; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8953-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 142>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + uart_console_active: uart-console-active-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-disable; + }; + + uart_console_sleep: uart-console-sleep-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <2>; + bias-pull-down; + }; + + sdc1_clk_on: sdc1-clk-on-state { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + sdc1_clk_off: sdc1-clk-off-state { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_cmd_on: sdc1-cmd-on-state { + pins = "sdc1_cmd"; + bias-disable; + drive-strength = <10>; + }; + + sdc1_cmd_off: sdc1-cmd-off-state { + pins = "sdc1_cmd"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_data_on: sdc1-data-on-state { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc1_data_off: sdc1-data-off-state { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_rclk_on: sdc1-rclk-on-state { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc1_rclk_off: sdc1-rclk-off-state { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc2_clk_on: sdc2-clk-on-state { + pins = "sdc2_clk"; + drive-strength = <16>; + bias-disable; + }; + + sdc2_clk_off: sdc2-clk-off-state { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc2_cmd_on: sdc2-cmd-on-state { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_cmd_off: sdc2-cmd-off-state { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc2_data_on: sdc2-data-on-state { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc2_data_off: sdc2-data-off-state { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc2_cd_on: cd-on-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc2_cd_off: cd-off-state { + pins = "gpio133"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_key_default: gpio-key-default-state { + pins = "gpio85"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c_1_default: i2c-1-default-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + i2c_1_sleep: i2c-1-sleep-state { + pins = "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_2_default: i2c-2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + i2c_2_sleep: i2c-2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_3_default: i2c-3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + i2c_3_sleep: i2c-3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_4_default: i2c-4-default-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + i2c_4_sleep: i2c-4-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_5_default: i2c-5-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + i2c_5_sleep: i2c-5-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_6_default: i2c-6-default-state { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + i2c_6_sleep: i2c-6-sleep-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_7_default: i2c-7-default-state { + pins = "gpio135", "gpio136"; + function = "blsp_i2c7"; + drive-strength = <2>; + bias-disable; + }; + + i2c_7_sleep: i2c-7-sleep-state { + pins = "gpio135", "gpio136"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c_8_default: i2c-8-default-state { + pins = "gpio98", "gpio99"; + function = "blsp_i2c8"; + drive-strength = <2>; + bias-disable; + }; + + i2c_8_sleep: i2c-8-sleep-state { + pins = "gpio98", "gpio99"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spi_3_default: spi-3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_spi3"; + drive-strength = <2>; + bias-disable; + }; + + spi_3_sleep: spi-3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spi_5_default: spi-5-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_spi5"; + drive-strength = <2>; + bias-disable; + }; + + spi_5_sleep: spi-5-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + spi_6_default: spi-6-default-state { + pins = "gpio22", "gpio23"; + function = "blsp_spi6"; + drive-strength = <2>; + bias-disable; + }; + + spi_6_sleep: spi-6-sleep-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wcnss_pin_a: wcnss-active-state { + + wcss-wlan2-pins { + pins = "gpio76"; + function = "wcss_wlan2"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan1-pins { + pins = "gpio77"; + function = "wcss_wlan1"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan0-pins { + pins = "gpio78"; + function = "wcss_wlan0"; + drive-strength = <6>; + bias-pull-up; + }; + + wcss-wlan-pins { + pins = "gpio79", "gpio80"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + }; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8953"; + reg = <0x01800000 0x80000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&mdss_dsi0_phy 1>, + <&mdss_dsi0_phy 0>, + <&mdss_dsi1_phy 1>, + <&mdss_dsi1_phy 0>; + clock-names = "xo", + "sleep", + "dsi0pll", + "dsi0pllbyte", + "dsi1pll", + "dsi1pllbyte"; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8953", "syscon"; + reg = <0x01937000 0x30000>; + }; + + tcsr_phy_clk_scheme_sel: syscon@193f044 { + compatible = "qcom,tcsr-msm8953", "syscon"; + reg = <0x0193f044 0x4>; + }; + + mdss: display-subsystem@1a00000 { + compatible = "qcom,mdss"; + + reg = <0x01a00000 0x1000>, + <0x01ab0000 0x1040>; + reg-names = "mdss_phys", + "vbif_phys"; + + power-domains = <&gcc MDSS_GDSC>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>, + <&gcc GCC_MDSS_MDP_CLK>; + clock-names = "iface", + "bus", + "vsync", + "core"; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + status = "disabled"; + + mdp: display-controller@1a01000 { + compatible = "qcom,msm8953-mdp5", "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + power-domains = <&gcc MDSS_GDSC>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 0x15>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&mdss_dsi1_in>; + }; + }; + }; + }; + + mdss_dsi0: dsi@1a94000 { + compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x01a94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi0_phy 0>, + <&mdss_dsi0_phy 1>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + + phys = <&mdss_dsi0_phy>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi0_out: endpoint { + }; + }; + }; + }; + + mdss_dsi0_phy: phy@1a94400 { + compatible = "qcom,dsi-phy-14nm-8953"; + reg = <0x01a94400 0x100>, + <0x01a94500 0x300>, + <0x01a94800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + + mdss_dsi1: dsi@1a96000 { + compatible = "qcom,msm8953-dsi-ctrl", "qcom,mdss-dsi-ctrl"; + reg = <0x01a96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + assigned-clocks = <&gcc BYTE1_CLK_SRC>, + <&gcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&mdss_dsi1_phy 0>, + <&mdss_dsi1_phy 1>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE1_CLK>, + <&gcc GCC_MDSS_PCLK1_CLK>, + <&gcc GCC_MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + + phys = <&mdss_dsi1_phy>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdss_dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + mdss_dsi1_out: endpoint { + }; + }; + }; + }; + + mdss_dsi1_phy: phy@1a96400 { + compatible = "qcom,dsi-phy-14nm-8953"; + reg = <0x01a96400 0x100>, + <0x01a96500 0x300>, + <0x01a96800 0x188>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; + }; + + apps_iommu: iommu@1e20000 { + compatible = "qcom,msm8953-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x01e20000 0x20000>; + + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_ASYNC_CLK>; + clock-names = "iface", "bus"; + + qcom,iommu-secure-id = <17>; + + #address-cells = <1>; + #iommu-cells = <1>; + #size-cells = <1>; + + /* VFE */ + iommu-ctx@14000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x14000 0x1000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* MDP_0 */ + iommu-ctx@15000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x15000 0x1000>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + }; + + /* VENUS_NS */ + iommu-ctx@16000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x16000 0x1000>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x1000>, + <0x02400000 0x800000>, + <0x02c00000 0x800000>, + <0x03800000 0x200000>, + <0x0200a000 0x2100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + interrupt-controller; + + #interrupt-cells = <4>; + #address-cells = <2>; + #size-cells = <0>; + }; + + mpss: remoteproc@4080000 { + compatible = "qcom,msm8953-mss-pil"; + reg = <0x04080000 0x100>, + <0x04020000 0x040>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8953_VDDCX>, + <&rpmpd MSM8953_VDDMX>, + <&rpmpd MSM8953_VDDMD>; + power-domain-names = "cx", "mx","mss"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "bus", "mem", "xo"; + + qcom,smem-states = <&smp2p_modem_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&gcc GCC_MSS_BCR>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; + + qcom,smd-edge = <0>; + qcom,ipc = <&apcs 8 12>; + qcom,remote-pid = <1>; + + label = "modem"; + }; + }; + + usb3: usb@70f8800 { + compatible = "qcom,msm8953-dwc3", "qcom,dwc3"; + reg = <0x070f8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq"; + + clocks = <&gcc GCC_USB_PHY_CFG_AHB_CLK>, + <&gcc GCC_USB30_MASTER_CLK>, + <&gcc GCC_PCNOC_USB3_AXI_CLK>, + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MASTER_CLK>; + assigned-clock-rates = <19200000>, <133330000>; + + power-domains = <&gcc USB30_GDSC>; + + qcom,select-utmi-as-pipe-clk; + + status = "disabled"; + + usb3_dwc3: usb@7000000 { + compatible = "snps,dwc3"; + reg = <0x07000000 0xcc00>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + phys = <&hsusb_phy>; + phy-names = "usb2-phy"; + + snps,usb2-gadget-lpm-disable; + snps,dis-u1-entry-quirk; + snps,dis-u2-entry-quirk; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x00>; + + maximum-speed = "high-speed"; + }; + }; + + sdhc_1: mmc@7824900 { + compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; + + reg = <0x07824900 0x500>, <0x07824000 0x800>; + reg-names = "hc", "core"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + + power-domains = <&rpmpd MSM8953_VDDCX>; + operating-points-v2 = <&sdhc1_opp_table>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; + + mmc-hs400-1_8v; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + + status = "disabled"; + + sdhc1_opp_table: opp-table-sdhc1 { + compatible = "operating-points-v2"; + + opp-25000000 { + opp-hz = /bits/ 64 <25000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + sdhc_2: mmc@7864900 { + compatible = "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"; + + reg = <0x07864900 0x500>, <0x07864000 0x800>; + reg-names = "hc", "core"; + + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + + power-domains = <&rpmpd MSM8953_VDDCX>; + operating-points-v2 = <&sdhc2_opp_table>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; + + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: opp-table-sdhc2 { + compatible = "operating-points-v2"; + + opp-25000000 { + opp-hz = /bits/ 64 <25000000>; + required-opps = <&rpmpd_opp_low_svs>; + }; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmpd_opp_svs>; + }; + + opp-177770000 { + opp-hz = /bits/ 64 <177770000>; + required-opps = <&rpmpd_opp_nom>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmpd_opp_nom>; + }; + }; + }; + + blsp1_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x1f000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + num-channels = <12>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,num-ees = <4>; + qcom,controlled-remotely; + }; + + uart_0: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + + status = "disabled"; + }; + + i2c_1: i2c@78b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b5000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_1_default>; + pinctrl-1 = <&i2c_1_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp1_dma 6>, <&blsp1_dma 7>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_2_default>; + pinctrl-1 = <&i2c_2_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_3_default>; + pinctrl-1 = <&i2c_3_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi_3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp1_dma 8>, <&blsp1_dma 9>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi_3_default>; + pinctrl-1 = <&spi_3_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_4_default>; + pinctrl-1 = <&i2c_4_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + blsp2_dma: dma-controller@7ac4000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07ac4000 0x1f000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + num-channels = <12>; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,num-ees = <4>; + qcom,controlled-remotely; + }; + + i2c_5: i2c@7af5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x07af5000 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 4>, <&blsp2_dma 5>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_5_default>; + pinctrl-1 = <&i2c_5_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi_5: spi@7af5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07af5000 0x600>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 4>, <&blsp2_dma 5>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi_5_default>; + pinctrl-1 = <&spi_5_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_6: i2c@7af6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x07af6000 0x600>; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_6_default>; + pinctrl-1 = <&i2c_6_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi_6: spi@7af6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x07af6000 0x600>; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 6>, <&blsp2_dma 7>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi_6_default>; + pinctrl-1 = <&spi_6_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_7: i2c@7af7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x07af7000 0x600>; + interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 8>, <&blsp2_dma 9>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_7_default>; + pinctrl-1 = <&i2c_7_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + i2c_8: i2c@7af8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x07af8000 0x600>; + interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 10>, <&blsp2_dma 11>; + dma-names = "tx", "rx"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c_8_default>; + pinctrl-1 = <&i2c_8_sleep>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + wcnss: remoteproc@a204000 { + compatible = "qcom,pronto-v3-pil", "qcom,pronto"; + reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + memory-region = <&wcnss_fw_mem>; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_wcnss_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + power-domains = <&rpmpd MSM8953_VDDCX>, + <&rpmpd MSM8953_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&smp2p_wcnss_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + status = "disabled"; + + wcnss_iris: iris { + /* Separate chip, compatible is board-specific */ + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss_ctrl: wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&wcnss>; + + wcnss_bt: bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wcnss_wifi: wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; + }; + + apcs: mailbox@b011000 { + compatible = "qcom,msm8953-apcs-kpss-global", "syscon"; + reg = <0x0b011000 0x1000>; + #mbox-cells = <1>; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b121000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + }; + + frame@b123000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b123000 0x1000>; + status = "disabled"; + }; + + frame@b124000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b124000 0x1000>; + status = "disabled"; + }; + + frame@b125000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b125000 0x1000>; + status = "disabled"; + }; + + frame@b126000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b126000 0x1000>; + status = "disabled"; + }; + + frame@b127000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b127000 0x1000>; + status = "disabled"; + }; + + frame@b128000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x0b128000 0x1000>; + status = "disabled"; + }; + }; + + lpass: remoteproc@c200000 { + compatible = "qcom,msm8953-adsp-pil"; + reg = <0x0c200000 0x100>; + + interrupts-extended = <&intc 0 293 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "xo"; + + power-domains = <&rpmpd MSM8953_VDDCX>; + power-domain-names = "cx"; + + memory-region = <&adsp_fw_mem>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + smd-edge { + interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; + + label = "lpass"; + mboxes = <&apcs 8>; + qcom,smd-edge = <1>; + qcom,remote-pid = <2>; + + apr { + compatible = "qcom,apr-v2"; + qcom,smd-channels = "apr_audio_svc"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + q6core: service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@16 { + reg = <PRIMARY_MI2S_RX>; + qcom,sd-lines = <0 1>; + }; + dai@20 { + reg = <TERTIARY_MI2S_TX>; + qcom,sd-lines = <0 1>; + }; + dai@127 { + reg = <QUINARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + + dai@0 { + reg = <0>; + direction = <Q6ASM_DAI_RX>; + }; + dai@1 { + reg = <1>; + direction = <Q6ASM_DAI_TX>; + }; + dai@2 { + reg = <2>; + direction = <Q6ASM_DAI_RX>; + }; + dai@3 { + reg = <3>; + direction = <Q6ASM_DAI_RX>; + is-compress-dai; + }; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + }; + }; + }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 9>; + trips { + cpu0_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu0_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 10>; + trips { + cpu1_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu1_alert>; + cooling-device = <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 11>; + trips { + cpu2_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu2_alert>; + cooling-device = <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 12>; + trips { + cpu3_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu3_alert>; + cooling-device = <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu4-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 4>; + trips { + cpu4_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu4_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu4_alert>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu5-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 5>; + trips { + cpu5_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu5_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu5_alert>; + cooling-device = <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu6-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 6>; + trips { + cpu6_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu6_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu6_alert>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + cpu7-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsens0 7>; + trips { + cpu7_alert: trip-point0 { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu7_crit: crit { + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu7_alert>; + cooling-device = <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; |