diff options
Diffstat (limited to 'dts/src/arm64/qcom/msm8992-xiaomi-libra.dts')
| -rw-r--r-- | dts/src/arm64/qcom/msm8992-xiaomi-libra.dts | 122 |
1 files changed, 94 insertions, 28 deletions
diff --git a/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts b/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts index 357d55496e..133f9c2540 100644 --- a/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts +++ b/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts @@ -11,41 +11,58 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/gpio-keys.h> +/delete-node/ &adsp_mem; +/delete-node/ &audio_mem; +/delete-node/ &mpss_mem; +/delete-node/ &peripheral_region; +/delete-node/ &res_hyp_mem; +/delete-node/ &rmtfs_mem; + / { model = "Xiaomi Mi 4C"; compatible = "xiaomi,libra", "qcom,msm8992"; + chassis-type = "handset"; + /* required for bootloader to select correct board */ - qcom,msm-id = <251 0 252 0>; + qcom,msm-id = <251 0>, <252 0>; qcom,pmic-id = <65545 65546 0 0>; qcom,board-id = <12 0>; /* This enables graphical output via bootloader-enabled display */ chosen { - bootargs = "earlycon=tty0 console=tty0"; + bootargs = "earlycon=tty0 console=tty0 maxcpus=1"; #address-cells = <2>; #size-cells = <2>; ranges; - framebuffer0: framebuffer@3404000 { - status= "okay"; + framebuffer0: framebuffer@3400000 { compatible = "simple-framebuffer"; - reg = <0 0x3404000 0 (1080 * 1920 * 3)>; + reg = <0 0x3400000 0 (1080 * 1920 * 3)>; width = <1080>; height = <1920>; stride = <(1080 * 3)>; format = "r8g8b8"; + /* + * That's a lot of clocks, but it's necessary due + * to unused clk cleanup & no panel driver yet.. + */ + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>; + power-domains = <&mmcc MDSS_GDSC>; }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - input-name = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + button { label = "Volume Up"; gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -60,25 +77,62 @@ #size-cells = <2>; ranges; - /* This is for getting crash logs using Android downstream kernels */ - ramoops@dfc00000 { - compatible = "ramoops"; - reg = <0x0 0xdfc00000 0x0 0x40000>; - console-size = <0x10000>; - record-size = <0x10000>; - ftrace-size = <0x10000>; - pmsg-size = <0x20000>; + memory_hole: hole@6400000 { + reg = <0 0x06400000 0 0x600000>; + no-map; + }; + + memory_hole2: hole2@6c00000 { + reg = <0 0x06c00000 0 0x2400000>; + no-map; + }; + + mpss_mem: mpss@9000000 { + reg = <0 0x09000000 0 0x5a00000>; + no-map; + }; + + tzapp: tzapp@ea00000 { + reg = <0 0x0ea00000 0 0x1900000>; + no-map; + }; + + mdm_rfsa_mem: mdm-rfsa@ca0b0000 { + reg = <0 0xca0b0000 0 0x10000>; + no-map; + }; + + rmtfs_mem: rmtfs@ca100000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xca100000 0 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + + qseecom_mem: qseecom@cb400000 { + reg = <0 0xcb400000 0 0x1c00000>; + no-mem; }; - modem_region: modem_region@9000000 { - reg = <0x0 0x9000000 0x0 0x5a00000>; + adsp_rfsa_mem: adsp-rfsa@cd000000 { + reg = <0 0xcd000000 0 0x10000>; no-map; }; - tzapp: modem_region@ea00000 { - reg = <0x0 0xea00000 0x0 0x1900000>; + sensor_rfsa_mem: sensor-rfsa@cd010000 { + reg = <0 0xcd010000 0 0x10000>; no-map; }; + + ramoops@dfc00000 { + compatible = "ramoops"; + reg = <0 0xdfc00000 0 0x40000>; + console-size = <0x10000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + }; }; }; @@ -120,13 +174,25 @@ status = "okay"; }; -&peripheral_region { - reg = <0x0 0x7400000 0x0 0x1c00000>; - no-map; +&pm8994_spmi_regulators { + VDD_APC0: s8 { + regulator-min-microvolt = <680000>; + regulator-max-microvolt = <1180000>; + regulator-always-on; + regulator-boot-on; + }; + + /* APC1 is 3-phase, but quoting downstream, s11 is "the gang leader" */ + VDD_APC1: s11 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; }; &rpm_requests { - pm8994-regulators { + regulators-0 { compatible = "qcom,rpm-pm8994-regulators"; vdd_l1-supply = <&pm8994_s7>; @@ -142,7 +208,7 @@ vdd_l17_29-supply = <&vph_pwr>; vdd_l20_21-supply = <&vph_pwr>; vdd_l25-supply = <&pm8994_s5>; - vdd_lvs1_2 = <&pm8994_s4>; + vdd_lvs1_2-supply = <&pm8994_s4>; /* S1, S2, S6 and S12 are managed by RPMPD */ @@ -336,7 +402,7 @@ pm8994_lvs2: lvs2 {}; }; - pmi8994_regulators: pmi8994-regulators { + pmi8994_regulators: regulators-1 { compatible = "qcom,rpm-pmi8994-regulators"; vdd_s1-supply = <&vph_pwr>; vdd_bst_byp-supply = <&vph_pwr>; |