diff options
Diffstat (limited to 'dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi')
-rw-r--r-- | dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi | 120 |
1 files changed, 58 insertions, 62 deletions
diff --git a/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi index 48de66bf19..9dbde79f26 100644 --- a/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi +++ b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -27,14 +27,11 @@ /* Kitakami firmware doesn't support PSCI */ /delete-node/ psci; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - input-name = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; autorepeat; - button@0 { + button-0 { label = "Volume Down"; gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -43,7 +40,7 @@ debounce-interval = <15>; }; - button@1 { + button-1 { label = "Volume Up"; gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -52,7 +49,7 @@ debounce-interval = <15>; }; - button@2 { + button-2 { label = "Camera Snapshot"; gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -61,7 +58,7 @@ debounce-interval = <15>; }; - button@3 { + button-3 { label = "Camera Focus"; gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>; linux,input-type = <1>; @@ -109,13 +106,6 @@ /* NXP PN547 NFC */ }; -&blsp1_i2c4 { - status = "okay"; - clock-frequency = <355000>; - - /* Empty but active */ -}; - &blsp1_i2c6 { status = "okay"; clock-frequency = <355000>; @@ -173,7 +163,7 @@ * mainline Linux. */ &cont_splash_mem { - reg = <0 0x3401000 0 0x2200000>; + reg = <0 0x03401000 0 0x2200000>; }; &pmi8994_spmi_regulators { @@ -183,8 +173,7 @@ * power domain.. which still isn't enough and forces us to bind * OXILI_CX and OXILI_GX together! */ - vdd_gfx: s2@1700 { - reg = <0x1700 0x100>; + vdd_gfx: s2 { regulator-name = "VDD_GFX"; regulator-min-microvolt = <980000>; regulator-max-microvolt = <980000>; @@ -195,26 +184,38 @@ }; &rpm_requests { - pm8994_regulators: pm8994-regulators { - compatible = "qcom,rpm-pm8994-regulators"; + /* PMI8994 should probe first, because pmi8994_bby supplies some of PM8994's regulators */ + pmi8994_regulators: regulators-0 { + compatible = "qcom,rpm-pmi8994-regulators"; vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; + }; + + pm8994_regulators: regulators-1 { + compatible = "qcom,rpm-pm8994-regulators"; + vdd_s3-supply = <&vph_pwr>; vdd_s4-supply = <&vph_pwr>; vdd_s5-supply = <&vph_pwr>; vdd_s6-supply = <&vph_pwr>; vdd_s7-supply = <&vph_pwr>; - vdd_s8-supply = <&vph_pwr>; - vdd_s9-supply = <&vph_pwr>; - vdd_s10-supply = <&vph_pwr>; - vdd_s11-supply = <&vph_pwr>; - vdd_s12-supply = <&vph_pwr>; vdd_l1-supply = <&pmi8994_s1>; vdd_l2_l26_l28-supply = <&pm8994_s3>; vdd_l3_l11-supply = <&pm8994_s3>; vdd_l4_l27_l31-supply = <&pm8994_s3>; - vdd_l5_l7-supply = <&pm8994_s5>; vdd_l6_l12_l32-supply = <&pm8994_s5>; vdd_l8_l16_l30-supply = <&vph_pwr>; vdd_l9_l10_l18_l22-supply = <&pmi8994_bby>; @@ -223,7 +224,7 @@ vdd_l17_l29-supply = <&pmi8994_bby>; vdd_l20_l21-supply = <&pmi8994_bby>; vdd_l25-supply = <&pm8994_s3>; - vdd_lvs1_lvs2-supply = <&pm8994_s4>; + vdd_lvs1_2-supply = <&pm8994_s4>; /* S1, S2, S6 and S12 are managed by RPMPD */ @@ -235,9 +236,9 @@ pm8994_s4: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-system-load = <325000>; regulator-allow-set-load; regulator-always-on; - regulator-system-load = <325000>; }; pm8994_s5: s5 { @@ -263,13 +264,14 @@ pm8994_l2: l2 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <1250000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; }; pm8994_l3: l3 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; + regulator-boot-on; }; pm8994_l4: l4 { @@ -309,8 +311,8 @@ pm8994_l12: l12 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; }; pm8994_l13: l13 { @@ -321,8 +323,9 @@ pm8994_l14: l14 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; + regulator-boot-on; }; pm8994_l15: l15 { @@ -338,44 +341,47 @@ pm8994_l17: l17 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; + regulator-boot-on; }; pm8994_l18: l18 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; + regulator-boot-on; }; pm8994_l19: l19 { regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; + regulator-boot-on; }; pm8994_l20: l20 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; - regulator-always-on; - regulator-boot-on; - regulator-allow-set-load; regulator-system-load = <570000>; + regulator-allow-set-load; }; pm8994_l21: l21 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; - regulator-always-on; - regulator-allow-set-load; regulator-system-load = <800000>; + regulator-allow-set-load; }; pm8994_l22: l22 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; + regulator-boot-on; }; pm8994_l23: l23 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; }; pm8994_l24: l24 { @@ -386,6 +392,7 @@ pm8994_l25: l25 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; + regulator-boot-on; }; pm8994_l26: l26 { @@ -396,30 +403,33 @@ pm8994_l27: l27 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + regulator-boot-on; }; pm8994_l28: l28 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; }; pm8994_l29: l29 { regulator-min-microvolt = <2700000>; regulator-max-microvolt = <2700000>; + regulator-boot-on; }; pm8994_l30: l30 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; }; pm8994_l31: l31 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-allow-set-load; regulator-system-load = <10000>; + regulator-allow-set-load; }; pm8994_l32: l32 { @@ -427,26 +437,11 @@ regulator-max-microvolt = <1800000>; }; - pm8994_lvs1: lvs1 {}; - pm8994_lvs2: lvs2 {}; - }; - - pmi8994_regulators: pmi8994-regulators { - compatible = "qcom,rpm-pmi8994-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_bst_byp-supply = <&vph_pwr>; - - pmi8994_s1: s1 { - regulator-min-microvolt = <1025000>; - regulator-max-microvolt = <1025000>; + pm8994_lvs1: lvs1 { + regulator-boot-on; }; - - /* S2 & S3 - VDD_GFX */ - - pmi8994_bby: boost-bypass { - regulator-min-microvolt = <3150000>; - regulator-max-microvolt = <3600000>; + pm8994_lvs2: lvs2 { + regulator-boot-on; }; }; }; @@ -475,21 +470,22 @@ &sdhc2 { status = "okay"; - cd-gpios = <&tlmm 100 0>; + cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>; vmmc-supply = <&pm8994_l21>; vqmmc-supply = <&pm8994_l13>; }; &tlmm { - ts_int_active: ts-int-active { + ts_int_active: ts-int-active-state { pins = "gpio42"; + function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; - ts_reset_active: ts-reset-active { + ts_reset_active: ts-reset-active-state { pins = "gpio109"; + function = "gpio"; drive-strength = <2>; bias-disable; output-low; |