diff options
Diffstat (limited to 'dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts')
| -rw-r--r-- | dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts | 58 |
1 files changed, 29 insertions, 29 deletions
diff --git a/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts b/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts index 25f30ec277..f8e9d90afa 100644 --- a/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts +++ b/dts/src/arm64/qcom/msm8996-xiaomi-gemini.dts @@ -5,9 +5,11 @@ /dts-v1/; +#include "msm8996.dtsi" #include "msm8996-xiaomi-common.dtsi" #include <dt-bindings/sound/qcom,q6afe.h> #include <dt-bindings/sound/qcom,q6asm.h> +#include <dt-bindings/sound/qcom,wcd9335.h> #include <dt-bindings/input/ti-drv260x.h> / { @@ -18,16 +20,14 @@ qcom,pmic-id = <0x20009 0x2000a 0x00 0x00>; qcom,board-id = <31 0>; - clocks { - divclk2_haptics: divclk2 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "divclk2"; + divclk2_haptics: divclk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk2"; - pinctrl-names = "default"; - pinctrl-0 = <&divclk2_pin_a>; - }; + pinctrl-names = "default"; + pinctrl-0 = <&divclk2_pin_a>; }; }; @@ -52,7 +52,7 @@ reg = <0x30>; #address-cells = <1>; #size-cells = <0>; - enable-gpio = <&pm8994_gpios 7 1>; + enable-gpios = <&pm8994_gpios 7 1>; clock-mode = /bits/8 <2>; label = "button-backlight"; @@ -60,14 +60,14 @@ reg = <0>; chan-name = "button-backlight"; led-cur = /bits/ 8 <0x32>; - max-cur = /bits/ 8 <0xC8>; + max-cur = /bits/ 8 <0xc8>; }; led@1 { reg = <0>; chan-name = "button-backlight1"; led-cur = /bits/ 8 <0x32>; - max-cur = /bits/ 8 <0xC8>; + max-cur = /bits/ 8 <0xc8>; }; }; }; @@ -80,7 +80,7 @@ #size-cells = <0>; interrupt-parent = <&tlmm>; interrupts = <125 IRQ_TYPE_LEVEL_LOW>; - vdda-supply = <&vreg_l6a_1p8>; + vio-supply = <&vreg_l6a_1p8>; vdd-supply = <&vdd_3v2_tp>; reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; @@ -91,7 +91,13 @@ }; -&dsi0 { +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; + }; +}; + +&mdss_dsi0 { status = "okay"; vdd-supply = <&vreg_l2a_1p25>; @@ -110,22 +116,16 @@ port { panel_in: endpoint { - remote-endpoint = <&dsi0_out>; + remote-endpoint = <&mdss_dsi0_out>; }; }; }; }; -&dsi0_out { +&mdss_dsi0_out { remote-endpoint = <&panel_in>; }; -&gpu { - zap-shader { - firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; - }; -}; - &pmi8994_wled { status = "okay"; }; @@ -193,7 +193,7 @@ }; codec { - sound-dai = <&wcd9335 6>; + sound-dai = <&wcd9335 AIF4_PB>; }; }; @@ -208,7 +208,7 @@ }; codec { - sound-dai = <&wcd9335 1>; + sound-dai = <&wcd9335 AIF1_CAP>; }; }; }; @@ -218,7 +218,7 @@ }; &rpm_requests { - pm8994-regulators { + regulators-0 { vreg_l17a_2p8: l17 { regulator-name = "vreg_l17a_2p8"; regulator-min-microvolt = <2500000>; @@ -444,28 +444,28 @@ "RFFE1_DATA", /* GPIO_148 */ "RFFE1_CLK"; /* GPIO_149 */ - touchscreen_default: touchscreen_default { + touchscreen_default: touchscreen-default-state { pins = "gpio89", "gpio125"; function = "gpio"; drive-strength = <10>; bias-pull-up; }; - touchscreen_sleep: touchscreen_sleep { + touchscreen_sleep: touchscreen-sleep-state { pins = "gpio89", "gpio125"; function = "gpio"; drive-strength = <2>; bias-disable; }; - vibrator_default: vibrator_default { + vibrator_default: vibrator-default-state { pins = "gpio93"; function = "gpio"; drive-strength = <8>; bias-pull-up; }; - vibrator_sleep: vibrator_sleep { + vibrator_sleep: vibrator-sleep-state { pins = "gpio93"; function = "gpio"; drive-strength = <2>; |