diff options
Diffstat (limited to 'dts/src/arm64/qcom/msm8998-mtp.dtsi')
| -rw-r--r-- | dts/src/arm64/qcom/msm8998-mtp.dtsi | 425 |
1 files changed, 0 insertions, 425 deletions
diff --git a/dts/src/arm64/qcom/msm8998-mtp.dtsi b/dts/src/arm64/qcom/msm8998-mtp.dtsi deleted file mode 100644 index a1d15eab85..0000000000 --- a/dts/src/arm64/qcom/msm8998-mtp.dtsi +++ /dev/null @@ -1,425 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ - -#include "msm8998.dtsi" -#include "pm8998.dtsi" -#include "pmi8998.dtsi" -#include "pm8005.dtsi" - -/ { - aliases { - serial0 = &blsp2_uart1; - serial1 = &blsp1_uart3; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - vph_pwr: vph-pwr-regulator { - compatible = "regulator-fixed"; - regulator-name = "vph_pwr"; - regulator-always-on; - regulator-boot-on; - }; -}; - -&blsp1_uart3 { - status = "okay"; - - bluetooth { - compatible = "qcom,wcn3990-bt"; - - vddio-supply = <&vreg_s4a_1p8>; - vddxo-supply = <&vreg_l7a_1p8>; - vddrf-supply = <&vreg_l17a_1p3>; - vddch0-supply = <&vreg_l25a_3p3>; - max-speed = <3200000>; - }; -}; - -&blsp2_uart1 { - status = "okay"; -}; - -&etf { - status = "okay"; -}; - -&etm1 { - status = "okay"; -}; - -&etm2 { - status = "okay"; -}; - -&etm3 { - status = "okay"; -}; - -&etm4 { - status = "okay"; -}; - -&etm5 { - status = "okay"; -}; - -&etm6 { - status = "okay"; -}; - -&etm7 { - status = "okay"; -}; - -&etm8 { - status = "okay"; -}; - -&etr { - status = "okay"; -}; - -&funnel1 { - status = "okay"; -}; - -&funnel2 { - status = "okay"; -}; - -&funnel3 { - status = "okay"; -}; - -&funnel4 { - // FIXME: Figure out why clock late_initcall crashes the board with - // this enabled. - // status = "okay"; -}; - -&funnel5 { - // FIXME: Figure out why clock late_initcall crashes the board with - // this enabled. - // status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie_phy { - status = "okay"; -}; - -&pm8005_lsid1 { - pm8005-regulators { - compatible = "qcom,pm8005-regulators"; - - vdd_s1-supply = <&vph_pwr>; - - pm8005_s1: s1 { /* VDD_GFX supply */ - regulator-min-microvolt = <524000>; - regulator-max-microvolt = <1100000>; - regulator-enable-ramp-delay = <500>; - - /* hack until we rig up the gpu consumer */ - regulator-always-on; - }; - }; -}; - -&qusb2phy { - status = "okay"; - - vdda-pll-supply = <&vreg_l12a_1p8>; - vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; -}; - -&replicator1 { - status = "okay"; -}; - -&rpm_requests { - pm8998-regulators { - compatible = "qcom,rpm-pm8998-regulators"; - - vdd_s1-supply = <&vph_pwr>; - vdd_s2-supply = <&vph_pwr>; - vdd_s3-supply = <&vph_pwr>; - vdd_s4-supply = <&vph_pwr>; - vdd_s5-supply = <&vph_pwr>; - vdd_s6-supply = <&vph_pwr>; - vdd_s7-supply = <&vph_pwr>; - vdd_s8-supply = <&vph_pwr>; - vdd_s9-supply = <&vph_pwr>; - vdd_s10-supply = <&vph_pwr>; - vdd_s11-supply = <&vph_pwr>; - vdd_s12-supply = <&vph_pwr>; - vdd_s13-supply = <&vph_pwr>; - vdd_l1_l27-supply = <&vreg_s7a_1p025>; - vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; - vdd_l3_l11-supply = <&vreg_s7a_1p025>; - vdd_l4_l5-supply = <&vreg_s7a_1p025>; - vdd_l6-supply = <&vreg_s5a_2p04>; - vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; - vdd_l9-supply = <&vreg_bob>; - vdd_l10_l23_l25-supply = <&vreg_bob>; - vdd_l13_l19_l21-supply = <&vreg_bob>; - vdd_l16_l28-supply = <&vreg_bob>; - vdd_l18_l22-supply = <&vreg_bob>; - vdd_l20_l24-supply = <&vreg_bob>; - vdd_l26-supply = <&vreg_s3a_1p35>; - vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; - - vreg_s3a_1p35: s3 { - regulator-min-microvolt = <1352000>; - regulator-max-microvolt = <1352000>; - }; - vreg_s4a_1p8: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-allow-set-load; - }; - vreg_s5a_2p04: s5 { - regulator-min-microvolt = <1904000>; - regulator-max-microvolt = <2040000>; - }; - vreg_s7a_1p025: s7 { - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1028000>; - }; - vreg_l1a_0p875: l1 { - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <880000>; - }; - vreg_l2a_1p2: l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - vreg_l3a_1p0: l3 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l5a_0p8: l5 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - }; - vreg_l6a_1p8: l6 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <1808000>; - }; - vreg_l7a_1p8: l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l8a_1p2: l8 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - vreg_l9a_1p8: l9 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <2960000>; - }; - vreg_l10a_1p8: l10 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <2960000>; - }; - vreg_l11a_1p0: l11 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - vreg_l12a_1p8: l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l13a_2p95: l13 { - regulator-min-microvolt = <1808000>; - regulator-max-microvolt = <2960000>; - }; - vreg_l14a_1p88: l14 { - regulator-min-microvolt = <1880000>; - regulator-max-microvolt = <1880000>; - }; - vreg_l15a_1p8: l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - vreg_l16a_2p7: l16 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2704000>; - }; - vreg_l17a_1p3: l17 { - regulator-min-microvolt = <1304000>; - regulator-max-microvolt = <1304000>; - }; - vreg_l18a_2p7: l18 { - regulator-min-microvolt = <2704000>; - regulator-max-microvolt = <2704000>; - }; - vreg_l19a_3p0: l19 { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3008000>; - }; - vreg_l20a_2p95: l20 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-allow-set-load; - }; - vreg_l21a_2p95: l21 { - regulator-min-microvolt = <2960000>; - regulator-max-microvolt = <2960000>; - regulator-allow-set-load; - regulator-system-load = <800000>; - }; - vreg_l22a_2p85: l22 { - regulator-min-microvolt = <2864000>; - regulator-max-microvolt = <2864000>; - }; - vreg_l23a_3p3: l23 { - regulator-min-microvolt = <3312000>; - regulator-max-microvolt = <3312000>; - }; - vreg_l24a_3p075: l24 { - regulator-min-microvolt = <3088000>; - regulator-max-microvolt = <3088000>; - }; - vreg_l25a_3p3: l25 { - regulator-min-microvolt = <3104000>; - regulator-max-microvolt = <3312000>; - }; - vreg_l26a_1p2: l26 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-allow-set-load; - }; - vreg_l28_3p0: l28 { - regulator-min-microvolt = <3008000>; - regulator-max-microvolt = <3008000>; - }; - - vreg_lvs1a_1p8: lvs1 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vreg_lvs2a_1p8: lvs2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - }; - - pmi8998-regulators { - compatible = "qcom,rpm-pmi8998-regulators"; - - vdd_bob-supply = <&vph_pwr>; - - vreg_bob: bob { - regulator-min-microvolt = <3312000>; - regulator-max-microvolt = <3600000>; - }; - }; -}; - -&remoteproc_adsp { - status = "okay"; -}; - -&remoteproc_mss { - status = "okay"; -}; - -&remoteproc_slpi { - status = "okay"; -}; - -&tlmm { - gpio-reserved-ranges = <0 4>, <81 4>; -}; - -&sdhc2 { - status = "okay"; - cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; - - vmmc-supply = <&vreg_l21a_2p95>; - vqmmc-supply = <&vreg_l13a_2p95>; - - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; - pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; -}; - -&stm { - status = "okay"; -}; - -&ufshc { - status = "okay"; - vcc-supply = <&vreg_l20a_2p95>; - vccq-supply = <&vreg_l26a_1p2>; - vccq2-supply = <&vreg_s4a_1p8>; - vcc-max-microamp = <750000>; - vccq-max-microamp = <560000>; - vccq2-max-microamp = <750000>; -}; - -&ufsphy { - status = "okay"; - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l2a_1p2>; - vddp-ref-clk-supply = <&vreg_l26a_1p2>; - vdda-phy-max-microamp = <51400>; - vdda-pll-max-microamp = <14600>; - vddp-ref-clk-max-microamp = <100>; - vddp-ref-clk-always-on; -}; - -&usb3 { - status = "okay"; -}; - -&usb3_dwc3 { - dr_mode = "host"; /* Force to host until we have Type-C hooked up */ -}; - -&usb3phy { - status = "okay"; - - vdda-phy-supply = <&vreg_l1a_0p875>; - vdda-pll-supply = <&vreg_l2a_1p2>; -}; - -&wifi { - status = "okay"; - - vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; - vdd-1.8-xo-supply = <&vreg_l7a_1p8>; - vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; - vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; -}; - -/* PINCTRL - board-specific pinctrl */ -&blsp1_uart3_on { - rx { - /delete-property/ bias-disable; - /* - * Configure a pull-up on 45 (RX). This is needed to - * avoid garbage data when the TX pin of the Bluetooth - * module is in tri-state (module powered off or not - * driving the signal yet). - */ - bias-pull-up; - }; - - cts { - /delete-property/ bias-disable; - /* - * Configure a pull-down on 47 (CTS) to match the pull - * of the Bluetooth module. - */ - bias-pull-down; - }; -}; |