diff options
Diffstat (limited to 'dts/src/arm64/qcom/pm6150.dtsi')
| -rw-r--r-- | dts/src/arm64/qcom/pm6150.dtsi | 62 |
1 files changed, 57 insertions, 5 deletions
diff --git a/dts/src/arm64/qcom/pm6150.dtsi b/dts/src/arm64/qcom/pm6150.dtsi index 23534639f4..ddbaf7280b 100644 --- a/dts/src/arm64/qcom/pm6150.dtsi +++ b/dts/src/arm64/qcom/pm6150.dtsi @@ -1,5 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause -// Copyright (c) 2019, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ #include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/input/linux-event-codes.h> @@ -7,6 +9,30 @@ #include <dt-bindings/spmi/spmi.h> #include <dt-bindings/thermal/thermal.h> +/ { + thermal-zones { + pm6150_thermal: pm6150-thermal { + polling-delay-passive = <100>; + polling-delay = <0>; + thermal-sensors = <&pm6150_temp>; + + trips { + pm6150_trip0: trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + pm6150_crit: crit { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pm6150_lsid0: pmic@0 { compatible = "qcom,pm6150", "qcom,spmi-pmic"; @@ -20,13 +46,21 @@ mode-bootloader = <0x2>; mode-recovery = <0x1>; - pwrkey { + pm6150_pwrkey: pwrkey { compatible = "qcom,pm8941-pwrkey"; interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; bias-pull-up; linux,code = <KEY_POWER>; }; + + pm6150_resin: resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + status = "disabled"; + }; }; pm6150_temp: temp-alarm@2400 { @@ -46,17 +80,35 @@ #size-cells = <0>; #io-channel-cells = <1>; - adc-chan@6 { + channel@6 { reg = <ADC5_DIE_TEMP>; label = "die_temp"; }; }; - pm6150_gpio: gpios@c000 { + pm6150_adc_tm: adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pm6150_rtc: rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + pm6150_gpios: gpio@c000 { compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm6150_gpio 0 0 10>; + gpio-ranges = <&pm6150_gpios 0 0 10>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; |