diff options
Diffstat (limited to 'dts/src/arm64/qcom/pm6150l.dtsi')
| -rw-r--r-- | dts/src/arm64/qcom/pm6150l.dtsi | 85 |
1 files changed, 81 insertions, 4 deletions
diff --git a/dts/src/arm64/qcom/pm6150l.dtsi b/dts/src/arm64/qcom/pm6150l.dtsi index b49860cd13..d13a1ab7c2 100644 --- a/dts/src/arm64/qcom/pm6150l.dtsi +++ b/dts/src/arm64/qcom/pm6150l.dtsi @@ -1,9 +1,43 @@ // SPDX-License-Identifier: BSD-3-Clause -// Copyright (c) 2019, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ +#include <dt-bindings/iio/qcom,spmi-vadc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm6150l-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm6150l_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pm6150l_lsid4: pmic@4 { compatible = "qcom,pm6150l", "qcom,spmi-pmic"; @@ -11,6 +45,13 @@ #address-cells = <1>; #size-cells = <0>; + pm6150l_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + #thermal-sensor-cells = <0>; + }; + pm6150l_adc: adc@3100 { compatible = "qcom,spmi-adc5"; reg = <0x3100>; @@ -19,10 +60,29 @@ #size-cells = <0>; #io-channel-cells = <1>; - adc-chan@6 { + channel@0 { + reg = <ADC5_REF_GND>; + qcom,pre-scaling = <1 1>; + label = "ref_gnd"; + }; + + channel@1 { + reg = <ADC5_1P25VREF>; + qcom,pre-scaling = <1 1>; + label = "vref_1p25"; + }; + + channel@6 { reg = <ADC5_DIE_TEMP>; + qcom,pre-scaling = <1 1>; label = "die_temp"; }; + + channel@83 { + reg = <ADC5_VPH_PWR>; + qcom,pre-scaling = <1 3>; + label = "vph_pwr"; + }; }; pm6150l_adc_tm: adc-tm@3500 { @@ -35,11 +95,11 @@ status = "disabled"; }; - pm6150l_gpio: gpios@c000 { + pm6150l_gpios: gpio@c000 { compatible = "qcom,pm6150l-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; - gpio-ranges = <&pm6150l_gpio 0 0 12>; + gpio-ranges = <&pm6150l_gpios 0 0 12>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; @@ -51,5 +111,22 @@ reg = <0x5 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm6150l_flash: led-controller@d300 { + compatible = "qcom,pm6150l-flash-led", "qcom,spmi-flash-led"; + reg = <0xd300>; + status = "disabled"; + }; + + pm6150l_wled: leds@d800 { + compatible = "qcom,pm6150l-wled"; + reg = <0xd800>, <0xd900>; + interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, + <0x5 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ovp", "short"; + label = "backlight"; + + status = "disabled"; + }; }; }; |