diff options
Diffstat (limited to 'dts/src/arm64/qcom/sc7180-trogdor-r1.dts')
| -rw-r--r-- | dts/src/arm64/qcom/sc7180-trogdor-r1.dts | 191 |
1 files changed, 191 insertions, 0 deletions
diff --git a/dts/src/arm64/qcom/sc7180-trogdor-r1.dts b/dts/src/arm64/qcom/sc7180-trogdor-r1.dts new file mode 100644 index 0000000000..0a281c2484 --- /dev/null +++ b/dts/src/arm64/qcom/sc7180-trogdor-r1.dts @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180.dtsi" + +ap_ec_spi: &spi6 {}; +ap_h1_spi: &spi0 {}; + +#include "sc7180-trogdor.dtsi" + +/ { + model = "Google Trogdor (rev1+)"; + compatible = "google,trogdor", "qcom,sc7180"; + + panel: panel { + compatible = "auo,b116xa01"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + ports { + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; +}; + +&ap_sar_sensor_i2c { + /* Not hooked up */ + status = "disabled"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&pp3300_ts>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + +&sdhc_2 { + status = "okay"; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "FP_TO_AP_IRQ_L", + "FP_RST_L", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "FPMCU_BOOT0", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "PEN_RST_ODL", + "AP_RAM_ID1", + "AP_RAM_ID2", + "PEN_IRQ_L", + "FPMCU_SEL", + "AMP_EN", + "P_SENSOR_INT_L", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "HP_IRQ", + "AP_RAM_ID0", + "EN_PP3300_DX_EDP", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "", + "", + "AMP_DIN", + "PEN_PDCT_L", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "TRACKPAD_INT_1V8_ODL", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "DBG_SPI_HOLD_L", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "", + "", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "EN_PP3300_CODEC", + "EN_PP3300_HUB", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "AP_SKU_ID0", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; |