diff options
Diffstat (limited to 'dts/src/arm64/qcom/sc7180-trogdor.dtsi')
| -rw-r--r-- | dts/src/arm64/qcom/sc7180-trogdor.dtsi | 106 |
1 files changed, 96 insertions, 10 deletions
diff --git a/dts/src/arm64/qcom/sc7180-trogdor.dtsi b/dts/src/arm64/qcom/sc7180-trogdor.dtsi index bf875589d3..8ed7dd39f6 100644 --- a/dts/src/arm64/qcom/sc7180-trogdor.dtsi +++ b/dts/src/arm64/qcom/sc7180-trogdor.dtsi @@ -13,6 +13,23 @@ #include "pm6150.dtsi" #include "pm6150l.dtsi" +/ { + thermal-zones { + charger-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 1>; + + trips { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; +}; + /* * Reserved memory changes * @@ -39,7 +56,7 @@ }; mpss_mem: memory@86000000 { - reg = <0x0 0x86000000 0x0 0x8c00000>; + reg = <0x0 0x86000000 0x0 0x2000000>; no-map; }; @@ -174,11 +191,38 @@ vin-supply = <&pp3300_a>; }; + pp3300_hub: pp3300-hub { + compatible = "regulator-fixed"; + regulator-name = "pp3300_hub"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 84 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_hub>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp3300_a>; + }; + /* BOARD-SPECIFIC TOP LEVEL NODES */ backlight: backlight { compatible = "pwm-backlight"; + /* The panels don't seem to like anything below ~ 5% */ + brightness-levels = < + 196 256 324 400 484 576 676 784 900 1024 1156 1296 + 1444 1600 1764 1936 2116 2304 2500 2704 2916 3136 + 3364 3600 3844 4096 + >; + num-interpolated-steps = <64>; + default-brightness-level = <951>; + pwms = <&cros_ec_pwm 1>; enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; power-supply = <&ppvar_sys>; @@ -192,7 +236,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pen_pdct_l>; - pen-insert { + pen_insert: pen-insert { label = "Pen Insert"; /* Insert = low, eject = high */ @@ -469,13 +513,10 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - pp3300_hub: pp3300_l7c: ldo7 { regulator-min-microvolt = <3304000>; regulator-max-microvolt = <3304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-always-on; - regulator-boot-on; }; pp1800_brij_vccio: @@ -645,7 +686,6 @@ edp_brij_i2c: &i2c2 { }; ap_sar_sensor_i2c: &i2c5 { - status = "okay"; clock-frequency = <400000>; ap_sar_sensor: proximity@28 { @@ -733,6 +773,25 @@ hp_i2c: &i2c9 { status = "okay"; }; +&pm6150_adc { + charger-thermistor@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + charger-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + &pm6150_pwrkey { status = "disabled"; }; @@ -776,7 +835,20 @@ hp_i2c: &i2c9 { cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; }; +&spi0 { + pinctrl-0 = <&qup_spi0_cs_gpio>; + cs-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; +}; + +&spi6 { + pinctrl-0 = <&qup_spi6_cs_gpio>; + cs-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; +}; + ap_spi_fp: &spi10 { + pinctrl-0 = <&qup_spi10_cs_gpio>; + cs-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; + cros_ec_fp: ec@0 { compatible = "google,cros-ec-spi"; reg = <0>; @@ -937,7 +1009,7 @@ ap_spi_fp: &spi10 { }; }; -&qup_spi0_default { +&qup_spi0_cs_gpio { pinconf { pins = "gpio34", "gpio35", "gpio36", "gpio37"; drive-strength = <2>; @@ -945,7 +1017,7 @@ ap_spi_fp: &spi10 { }; }; -&qup_spi6_default { +&qup_spi6_cs_gpio { pinconf { pins = "gpio59", "gpio60", "gpio61", "gpio62"; drive-strength = <2>; @@ -953,7 +1025,7 @@ ap_spi_fp: &spi10 { }; }; -&qup_spi10_default { +&qup_spi10_cs_gpio { pinconf { pins = "gpio86", "gpio87", "gpio88", "gpio89"; drive-strength = <2>; @@ -1164,6 +1236,19 @@ ap_spi_fp: &spi10 { }; }; + en_pp3300_hub: en-pp3300-hub { + pinmux { + pins = "gpio84"; + function = "gpio"; + }; + + pinconf { + pins = "gpio84"; + drive-strength = <2>; + bias-disable; + }; + }; + fpmcu_boot0: fpmcu-boot0 { pinmux { pins = "gpio10"; @@ -1310,7 +1395,8 @@ ap_spi_fp: &spi10 { pinconf { pins = "gpio24"; - bias-pull-up; + /* Has external pullup */ + bias-disable; }; }; |