summaryrefslogtreecommitdiffstats
path: root/dts/src/arm64/qcom/sc7280-herobrine.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm64/qcom/sc7280-herobrine.dtsi')
-rw-r--r--dts/src/arm64/qcom/sc7280-herobrine.dtsi164
1 files changed, 119 insertions, 45 deletions
diff --git a/dts/src/arm64/qcom/sc7280-herobrine.dtsi b/dts/src/arm64/qcom/sc7280-herobrine.dtsi
index 9cb1bc8ed6..9ea6636125 100644
--- a/dts/src/arm64/qcom/sc7280-herobrine.dtsi
+++ b/dts/src/arm64/qcom/sc7280-herobrine.dtsi
@@ -15,6 +15,7 @@
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
#include "sc7280-qcard.dtsi"
#include "sc7280-chrome-common.dtsi"
@@ -107,6 +108,24 @@
pinctrl-names = "default";
pinctrl-0 = <&en_pp3300_dx_edp>;
+ regulator-enable-ramp-delay = <3000>;
+
+ /*
+ * eDP panel specs nearly always have a spec that says you
+ * shouldn't turn them off an on again without waiting 500ms.
+ * Add this as a board constraint since this rail is shared
+ * between the panel and touchscreen.
+ */
+ off-on-delay-us = <500000>;
+
+ /*
+ * Stat the regulator on. This has the advantage of starting
+ * the slow process of powering the panel on as soon as we
+ * probe the regulator. It also avoids tripping the
+ * off-on-delay immediately on every bootup.
+ */
+ regulator-boot-on;
+
vin-supply = <&pp3300_z1>;
};
@@ -143,8 +162,8 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ /* The BIOS leaves this regulator on */
regulator-boot-on;
- regulator-always-on;
gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>;
enable-active-high;
@@ -295,12 +314,20 @@
/* BOARD-SPECIFIC TOP LEVEL NODES */
- pwmleds {
+ max98360a: audio-codec-0 {
+ compatible = "maxim,max98360a";
+ pinctrl-names = "default";
+ pinctrl-0 = <&amp_en>;
+ sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
+ #sound-dai-cells = <0>;
+ };
+
+ pwmleds: pwmleds {
compatible = "pwm-leds";
status = "disabled";
- keyboard_backlight: keyboard-backlight {
- status = "disabled";
+ keyboard_backlight: led-0 {
label = "cros_ec::kbd_backlight";
+ function = LED_FUNCTION_KBD_BACKLIGHT;
pwms = <&cros_ec_pwm 0>;
max-brightness = <1023>;
};
@@ -388,7 +415,7 @@ ap_sar_sensor_i2c: &i2c1 {
vdd-supply = <&pp1800_prox>;
- label = "proximity-wifi-lte0";
+ label = "proximity-wifi_cellular-0";
status = "disabled";
};
@@ -404,7 +431,7 @@ ap_sar_sensor_i2c: &i2c1 {
vdd-supply = <&pp1800_prox>;
- label = "proximity-wifi-lte1";
+ label = "proximity-wifi_cellular-1";
status = "disabled";
};
};
@@ -429,8 +456,15 @@ ap_i2c_tpm: &i2c14 {
status = "okay";
};
-&mdss_mdp {
+&mdss_dp {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hot_plug_det>;
+};
+
+&mdss_dp_out {
+ data-lanes = <0 1>;
+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000>;
};
/* NVMe drive, enabled on a per-board basis */
@@ -438,7 +472,7 @@ ap_i2c_tpm: &i2c14 {
pinctrl-names = "default";
pinctrl-0 = <&pcie1_clkreq_n>, <&ssd_rst_l>, <&pe_wake_odl>;
- perst-gpio = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
vddpe-3v3-supply = <&pp3300_ssd>;
};
@@ -476,6 +510,10 @@ ap_i2c_tpm: &i2c14 {
cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
};
+&spi_flash {
+ spi-max-frequency = <50000000>;
+};
+
/* Fingerprint, enabled on a per-board basis */
ap_spi_fp: &spi9 {
pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs_gpio_init_high>, <&qup_spi9_cs_gpio>;
@@ -483,13 +521,16 @@ ap_spi_fp: &spi9 {
cs-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
cros_ec_fp: ec@0 {
- compatible = "google,cros-ec-spi";
+ compatible = "google,cros-ec-fp", "google,cros-ec-spi";
reg = <0>;
interrupt-parent = <&tlmm>;
interrupts = <61 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>;
+ boot0-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
spi-max-frequency = <3000000>;
+ vdd-supply = <&pp3300_fp_mcu>;
};
};
@@ -584,31 +625,60 @@ ap_ec_spi: &spi10 {
&usb_1_dwc3 {
dr_mode = "host";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.x hub on port 1 */
+ usb_hub_2_x: hub@1 {
+ compatible = "usbbda,5411";
+ reg = <1>;
+ vdd-supply = <&pp3300_hub>;
+ peer-hub = <&usb_hub_3_x>;
+ };
+
+ /* 3.x hub on port 2 */
+ usb_hub_3_x: hub@2 {
+ compatible = "usbbda,411";
+ reg = <2>;
+ vdd-supply = <&pp3300_hub>;
+ peer-hub = <&usb_hub_2_x>;
+ };
};
&usb_1_hsphy {
status = "okay";
+
+ qcom,hs-rise-fall-time-bp = <0>;
+ qcom,squelch-detector-bp = <(-2090)>;
+ qcom,hs-disconnect-bp = <1743>;
+ qcom,hs-amplitude-bp = <1780>;
+ qcom,hs-crossover-voltage-microvolt = <(-31000)>;
+ qcom,hs-output-impedance-micro-ohms = <2600000>;
};
&usb_1_qmpphy {
status = "okay";
};
-&usb_2 {
- status = "okay";
-};
+/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
-&usb_2_dwc3 {
- dr_mode = "host";
+&dp_hot_plug_det {
+ bias-disable;
};
-&usb_2_hsphy {
- status = "okay";
+&mi2s1_data0 {
+ drive-strength = <6>;
+ bias-disable;
};
-/* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
+&mi2s1_sclk {
+ drive-strength = <6>;
+ bias-disable;
+};
-&dp_hot_plug_det {
+&mi2s1_ws {
+ drive-strength = <6>;
bias-disable;
};
@@ -618,18 +688,22 @@ ap_ec_spi: &spi10 {
};
&qspi_cs0 {
- bias-disable;
+ bias-disable; /* External pullup */
drive-strength = <8>;
};
&qspi_clk {
- bias-disable;
+ bias-pull-down; /* No external pulls */
drive-strength = <8>;
};
-&qspi_data01 {
- /* High-Z when no transfers; nice to park the lines */
- bias-pull-up;
+&qspi_data0 {
+ bias-pull-down; /* No external pulls */
+ drive-strength = <8>;
+};
+
+&qspi_data1 {
+ bias-disable; /* External pulldown */
drive-strength = <8>;
};
@@ -717,27 +791,27 @@ ap_ec_spi: &spi10 {
pinctrl-names = "default";
pinctrl-0 = <&bios_flash_wp_od>;
- amp_en: amp-en {
+ amp_en: amp-en-state {
pins = "gpio63";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- ap_ec_int_l: ap-ec-int-l {
+ ap_ec_int_l: ap-ec-int-l-state {
pins = "gpio18";
function = "gpio";
bias-pull-up;
};
- bios_flash_wp_od: bios-flash-wp-od {
+ bios_flash_wp_od: bios-flash-wp-od-state {
pins = "gpio16";
function = "gpio";
/* Has external pull */
bias-disable;
};
- en_fp_rails: en-fp-rails {
+ en_fp_rails: en-fp-rails-state {
pins = "gpio77";
function = "gpio";
bias-disable;
@@ -745,60 +819,60 @@ ap_ec_spi: &spi10 {
output-high;
};
- en_pp3300_codec: en-pp3300-codec {
+ en_pp3300_codec: en-pp3300-codec-state {
pins = "gpio105";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- en_pp3300_dx_edp: en-pp3300-dx-edp {
+ en_pp3300_dx_edp: en-pp3300-dx-edp-state {
pins = "gpio80";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- fp_rst_l: fp-rst-l {
+ fp_rst_l: fp-rst-l-state {
pins = "gpio78";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- fp_to_ap_irq_l: fp-to-ap-irq-l {
+ fp_to_ap_irq_l: fp-to-ap-irq-l-state {
pins = "gpio61";
function = "gpio";
/* Has external pullup */
bias-disable;
};
- fpmcu_boot0: fpmcu-boot0 {
+ fpmcu_boot0: fpmcu-boot0-state {
pins = "gpio68";
function = "gpio";
bias-disable;
};
- gsc_ap_int_odl: gsc-ap-int-odl {
+ gsc_ap_int_odl: gsc-ap-int-odl-state {
pins = "gpio104";
function = "gpio";
bias-pull-up;
};
- hp_irq: hp-irq {
+ hp_irq: hp-irq-state {
pins = "gpio101";
function = "gpio";
bias-pull-up;
};
- hub_en: hub-en {
+ hub_en: hub-en-state {
pins = "gpio157";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- pe_wake_odl: pe-wake-odl {
+ pe_wake_odl: pe-wake-odl-state {
pins = "gpio3";
function = "gpio";
/* Has external pull */
@@ -807,45 +881,45 @@ ap_ec_spi: &spi10 {
};
/* For ap_spi_fp */
- qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high {
+ qup_spi9_cs_gpio_init_high: qup-spi9-cs-gpio-init-high-state {
pins = "gpio39";
function = "gpio";
output-high;
};
/* For ap_ec_spi */
- qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high {
+ qup_spi10_cs_gpio_init_high: qup-spi10-cs-gpio-init-high-state {
pins = "gpio43";
function = "gpio";
output-high;
};
- sar0_irq_odl: sar0-irq-odl {
+ sar0_irq_odl: sar0-irq-odl-state {
pins = "gpio141";
function = "gpio";
bias-pull-up;
};
- sar1_irq_odl: sar1-irq-odl {
+ sar1_irq_odl: sar1-irq-odl-state {
pins = "gpio140";
function = "gpio";
bias-pull-up;
};
- sd_cd_odl: sd-cd-odl {
+ sd_cd_odl: sd-cd-odl-state {
pins = "gpio91";
function = "gpio";
bias-pull-up;
};
- ssd_en: ssd-en {
+ ssd_en: ssd-en-state {
pins = "gpio51";
function = "gpio";
bias-disable;
drive-strength = <2>;
};
- ssd_rst_l: ssd-rst-l {
+ ssd_rst_l: ssd-rst-l-state {
pins = "gpio2";
function = "gpio";
bias-disable;
@@ -853,14 +927,14 @@ ap_ec_spi: &spi10 {
output-low;
};
- tp_int_odl: tp-int-odl {
+ tp_int_odl: tp-int-odl-state {
pins = "gpio7";
function = "gpio";
/* Has external pullup */
bias-disable;
};
- wf_cam_en: wf-cam-en {
+ wf_cam_en: wf-cam-en-state {
pins = "gpio119";
function = "gpio";
/* Has external pulldown */
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-23 09:52:38 +0000