summaryrefslogtreecommitdiffstats
path: root/dts/src/arm64/qcom/sdm630.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm64/qcom/sdm630.dtsi')
-rw-r--r--dts/src/arm64/qcom/sdm630.dtsi602
1 files changed, 334 insertions, 268 deletions
diff --git a/dts/src/arm64/qcom/sdm630.dtsi b/dts/src/arm64/qcom/sdm630.dtsi
index 1bc9091cad..f5921b80ef 100644
--- a/dts/src/arm64/qcom/sdm630.dtsi
+++ b/dts/src/arm64/qcom/sdm630.dtsi
@@ -8,10 +8,12 @@
#include <dt-bindings/clock/qcom,gpucc-sdm660.h>
#include <dt-bindings/clock/qcom,mmcc-sdm660.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
+#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/interconnect/qcom,sdm660.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/soc/qcom,apr.h>
/ {
@@ -63,6 +65,7 @@
L2_1: l2-cache {
compatible = "cache";
cache-level = <2>;
+ cache-unified;
};
};
@@ -127,6 +130,7 @@
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
+ cache-unified;
};
};
@@ -328,6 +332,25 @@
reg = <0x0 0x80000000 0x0 0x0>;
};
+ dsi_opp_table: opp-table-dsi {
+ compatible = "operating-points-v2";
+
+ opp-131250000 {
+ opp-hz = /bits/ 64 <131250000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp-210000000 {
+ opp-hz = /bits/ 64 <210000000>;
+ required-opps = <&rpmpd_opp_svs_plus>;
+ };
+
+ opp-262500000 {
+ opp-hz = /bits/ 64 <262500000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+ };
+
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
@@ -338,6 +361,74 @@
method = "smc";
};
+ rpm: remoteproc {
+ compatible = "qcom,sdm660-rpm-proc", "qcom,rpm-proc";
+
+ glink-edge {
+ compatible = "qcom,glink-rpm";
+
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
+ mboxes = <&apcs_glb 0>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-sdm660";
+ qcom,glink-channels = "rpm_requests";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
+ rpmpd: power-controller {
+ compatible = "qcom,sdm660-rpmpd";
+ #power-domain-cells = <1>;
+ operating-points-v2 = <&rpmpd_opp_table>;
+
+ rpmpd_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ rpmpd_opp_ret: opp1 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION>;
+ };
+
+ rpmpd_opp_ret_plus: opp2 {
+ opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
+ };
+
+ rpmpd_opp_min_svs: opp3 {
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ };
+
+ rpmpd_opp_low_svs: opp4 {
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ };
+
+ rpmpd_opp_svs: opp5 {
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ };
+
+ rpmpd_opp_svs_plus: opp6 {
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ };
+
+ rpmpd_opp_nom: opp7 {
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ };
+
+ rpmpd_opp_nom_plus: opp8 {
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ };
+
+ rpmpd_opp_turbo: opp9 {
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ };
+ };
+ };
+ };
+ };
+ };
+
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -364,7 +455,7 @@
no-map;
qcom,client-id = <1>;
- qcom,vmid = <15>;
+ qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
};
smem_region: smem-mem@86000000 {
@@ -419,70 +510,6 @@
};
};
- rpm-glink {
- compatible = "qcom,glink-rpm";
-
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-sdm660";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
- #clock-cells = <1>;
- };
-
- rpmpd: power-controller {
- compatible = "qcom,sdm660-rpmpd";
- #power-domain-cells = <1>;
- operating-points-v2 = <&rpmpd_opp_table>;
-
- rpmpd_opp_table: opp-table {
- compatible = "operating-points-v2";
-
- rpmpd_opp_ret: opp1 {
- opp-level = <RPM_SMD_LEVEL_RETENTION>;
- };
-
- rpmpd_opp_ret_plus: opp2 {
- opp-level = <RPM_SMD_LEVEL_RETENTION_PLUS>;
- };
-
- rpmpd_opp_min_svs: opp3 {
- opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
- };
-
- rpmpd_opp_low_svs: opp4 {
- opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
- };
-
- rpmpd_opp_svs: opp5 {
- opp-level = <RPM_SMD_LEVEL_SVS>;
- };
-
- rpmpd_opp_svs_plus: opp6 {
- opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
- };
-
- rpmpd_opp_nom: opp7 {
- opp-level = <RPM_SMD_LEVEL_NOM>;
- };
-
- rpmpd_opp_nom_plus: opp8 {
- opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
- };
-
- rpmpd_opp_turbo: opp9 {
- opp-level = <RPM_SMD_LEVEL_TURBO>;
- };
- };
- };
- };
- };
-
smem: smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;
@@ -529,7 +556,7 @@
};
};
- soc {
+ soc@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
@@ -580,9 +607,6 @@
compatible = "qcom,sdm660-bimc";
reg = <0x01008000 0x78000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
- <&rpmcc RPM_SMD_BIMC_A_CLK>;
};
restart@10ac000 {
@@ -594,28 +618,17 @@
compatible = "qcom,sdm660-cnoc";
reg = <0x01500000 0x10000>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
- <&rpmcc RPM_SMD_CNOC_A_CLK>;
};
snoc: interconnect@1626000 {
compatible = "qcom,sdm660-snoc";
reg = <0x01626000 0x7090>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a";
- clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
- <&rpmcc RPM_SMD_SNOC_A_CLK>;
};
anoc2_smmu: iommu@16c0000 {
compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2";
reg = <0x016c0000 0x40000>;
-
- assigned-clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- assigned-clock-rates = <1000>;
- clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- clock-names = "bus";
#global-interrupts = <2>;
#iommu-cells = <1>;
@@ -660,16 +673,12 @@
compatible = "qcom,sdm660-a2noc";
reg = <0x01704000 0xc100>;
#interconnect-cells = <1>;
- clock-names = "bus",
- "bus_a",
- "ipa",
+ clock-names = "ipa",
"ufs_axi",
"aggre2_ufs_axi",
"aggre2_usb3_axi",
"cfg_noc_usb2_axi";
- clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
- <&rpmcc RPM_SMD_IPA_CLK>,
+ clocks = <&rpmcc RPM_SMD_IPA_CLK>,
<&gcc GCC_UFS_AXI_CLK>,
<&gcc GCC_AGGRE2_UFS_AXI_CLK>,
<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
@@ -678,12 +687,10 @@
mnoc: interconnect@1745000 {
compatible = "qcom,sdm660-mnoc";
- reg = <0x01745000 0xA010>;
+ reg = <0x01745000 0xa010>;
#interconnect-cells = <1>;
- clock-names = "bus", "bus_a", "iface";
- clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
- <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK_A>,
- <&mmcc AHB_CLK_SRC>;
+ clock-names = "iface";
+ clocks = <&mmcc AHB_CLK_SRC>;
};
tsens: thermal-sensor@10ae000 {
@@ -697,9 +704,15 @@
#thermal-sensor-cells = <1>;
};
- tcsr_mutex_regs: syscon@1f40000 {
- compatible = "syscon";
- reg = <0x01f40000 0x40000>;
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x01f40000 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
+ tcsr_regs_1: syscon@1f60000 {
+ compatible = "qcom,sdm630-tcsr", "syscon";
+ reg = <0x01f60000 0x20000>;
};
tlmm: pinctrl@3100000 {
@@ -715,33 +728,36 @@
interrupt-controller;
#interrupt-cells = <2>;
- blsp1_uart1_default: blsp1-uart1-default {
+ blsp1_uart1_default: blsp1-uart1-default-state {
pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "blsp_uart1";
drive-strength = <2>;
bias-disable;
};
- blsp1_uart1_sleep: blsp1-uart1-sleep {
+ blsp1_uart1_sleep: blsp1-uart1-sleep-state {
pins = "gpio0", "gpio1", "gpio2", "gpio3";
+ function = "gpio";
drive-strength = <2>;
bias-disable;
};
- blsp1_uart2_default: blsp1-uart2-default {
+ blsp1_uart2_default: blsp1-uart2-default-state {
pins = "gpio4", "gpio5";
+ function = "blsp_uart2";
drive-strength = <2>;
bias-disable;
};
- blsp2_uart1_default: blsp2-uart1-active {
- tx-rts {
+ blsp2_uart1_default: blsp2-uart1-active-state {
+ tx-rts-pins {
pins = "gpio16", "gpio19";
function = "blsp_uart5";
drive-strength = <2>;
bias-disable;
};
- rx {
+ rx-pins {
/*
* Avoid garbage data while BT module
* is powered off or not driving signal
@@ -752,7 +768,7 @@
bias-pull-up;
};
- cts {
+ cts-pins {
/* Match the pull of the BT module */
pins = "gpio18";
function = "blsp_uart5";
@@ -761,244 +777,232 @@
};
};
- blsp2_uart1_sleep: blsp2-uart1-sleep {
- tx {
+ blsp2_uart1_sleep: blsp2-uart1-sleep-state {
+ tx-pins {
pins = "gpio16";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
- rx-cts-rts {
+ rx-cts-rts-pins {
pins = "gpio17", "gpio18", "gpio19";
function = "gpio";
drive-strength = <2>;
- bias-no-pull;
+ bias-disable;
};
};
- i2c1_default: i2c1-default {
+ i2c1_default: i2c1-default-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-disable;
};
- i2c1_sleep: i2c1-sleep {
+ i2c1_sleep: i2c1-sleep-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-pull-up;
};
- i2c2_default: i2c2-default {
+ i2c2_default: i2c2-default-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
- i2c2_sleep: i2c2-sleep {
+ i2c2_sleep: i2c2-sleep-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-pull-up;
};
- i2c3_default: i2c3-default {
+ i2c3_default: i2c3-default-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
- i2c3_sleep: i2c3-sleep {
+ i2c3_sleep: i2c3-sleep-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-pull-up;
};
- i2c4_default: i2c4-default {
+ i2c4_default: i2c4-default-state {
pins = "gpio14", "gpio15";
function = "blsp_i2c4";
drive-strength = <2>;
bias-disable;
};
- i2c4_sleep: i2c4-sleep {
+ i2c4_sleep: i2c4-sleep-state {
pins = "gpio14", "gpio15";
function = "blsp_i2c4";
drive-strength = <2>;
bias-pull-up;
};
- i2c5_default: i2c5-default {
+ i2c5_default: i2c5-default-state {
pins = "gpio18", "gpio19";
function = "blsp_i2c5";
drive-strength = <2>;
bias-disable;
};
- i2c5_sleep: i2c5-sleep {
+ i2c5_sleep: i2c5-sleep-state {
pins = "gpio18", "gpio19";
function = "blsp_i2c5";
drive-strength = <2>;
bias-pull-up;
};
- i2c6_default: i2c6-default {
+ i2c6_default: i2c6-default-state {
pins = "gpio22", "gpio23";
function = "blsp_i2c6";
drive-strength = <2>;
bias-disable;
};
- i2c6_sleep: i2c6-sleep {
+ i2c6_sleep: i2c6-sleep-state {
pins = "gpio22", "gpio23";
function = "blsp_i2c6";
drive-strength = <2>;
bias-pull-up;
};
- i2c7_default: i2c7-default {
+ i2c7_default: i2c7-default-state {
pins = "gpio26", "gpio27";
function = "blsp_i2c7";
drive-strength = <2>;
bias-disable;
};
- i2c7_sleep: i2c7-sleep {
+ i2c7_sleep: i2c7-sleep-state {
pins = "gpio26", "gpio27";
function = "blsp_i2c7";
drive-strength = <2>;
bias-pull-up;
};
- i2c8_default: i2c8-default {
+ i2c8_default: i2c8-default-state {
pins = "gpio30", "gpio31";
- function = "blsp_i2c8";
+ function = "blsp_i2c8_a";
drive-strength = <2>;
bias-disable;
};
- i2c8_sleep: i2c8-sleep {
+ i2c8_sleep: i2c8-sleep-state {
pins = "gpio30", "gpio31";
- function = "blsp_i2c8";
+ function = "blsp_i2c8_a";
drive-strength = <2>;
bias-pull-up;
};
- cci0_default: cci0_default {
- pinmux {
- pins = "gpio36","gpio37";
- function = "cci_i2c";
- };
-
- pinconf {
- pins = "gpio36","gpio37";
- bias-pull-up;
- drive-strength = <2>;
- };
+ cci0_default: cci0-default-state {
+ pins = "gpio36","gpio37";
+ function = "cci_i2c";
+ bias-pull-up;
+ drive-strength = <2>;
};
- cci1_default: cci1_default {
- pinmux {
- pins = "gpio38","gpio39";
- function = "cci_i2c";
- };
-
- pinconf {
- pins = "gpio38","gpio39";
- bias-pull-up;
- drive-strength = <2>;
- };
+ cci1_default: cci1-default-state {
+ pins = "gpio38","gpio39";
+ function = "cci_i2c";
+ bias-pull-up;
+ drive-strength = <2>;
};
- sdc1_state_on: sdc1-on {
- clk {
+ sdc1_state_on: sdc1-on-state {
+ clk-pins {
pins = "sdc1_clk";
bias-disable;
drive-strength = <16>;
};
- cmd {
+ cmd-pins {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <10>;
};
- data {
+ data-pins {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <10>;
};
- rclk {
+ rclk-pins {
pins = "sdc1_rclk";
bias-pull-down;
};
};
- sdc1_state_off: sdc1-off {
- clk {
+ sdc1_state_off: sdc1-off-state {
+ clk-pins {
pins = "sdc1_clk";
bias-disable;
drive-strength = <2>;
};
- cmd {
+ cmd-pins {
pins = "sdc1_cmd";
bias-pull-up;
drive-strength = <2>;
};
- data {
+ data-pins {
pins = "sdc1_data";
bias-pull-up;
drive-strength = <2>;
};
- rclk {
+ rclk-pins {
pins = "sdc1_rclk";
bias-pull-down;
};
};
- sdc2_state_on: sdc2-on {
- clk {
+ sdc2_state_on: sdc2-on-state {
+ clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <16>;
};
- cmd {
+ cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <10>;
};
- data {
+ data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <10>;
};
};
- sdc2_state_off: sdc2-off {
- clk {
+ sdc2_state_off: sdc2-off-state {
+ clk-pins {
pins = "sdc2_clk";
bias-disable;
drive-strength = <2>;
};
- cmd {
+ cmd-pins {
pins = "sdc2_cmd";
bias-pull-up;
drive-strength = <2>;
};
- data {
+ data-pins {
pins = "sdc2_data";
bias-pull-up;
drive-strength = <2>;
@@ -1006,13 +1010,72 @@
};
};
+ remoteproc_mss: remoteproc@4080000 {
+ compatible = "qcom,sdm660-mss-pil";
+ reg = <0x04080000 0x100>, <0x04180000 0x40>;
+ reg-names = "qdsp6", "rmb";
+
+ interrupts-extended = <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+ <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>,
+ <&gcc GCC_BOOT_ROM_AHB_CLK>,
+ <&gcc GPLL0_OUT_MSSCC>,
+ <&gcc GCC_MSS_SNOC_AXI_CLK>,
+ <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
+ <&rpmcc RPM_SMD_QDSS_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface",
+ "bus",
+ "mem",
+ "gpll0_mss",
+ "snoc_axi",
+ "mnoc_axi",
+ "qdss",
+ "xo";
+
+ qcom,smem-states = <&modem_smp2p_out 0>;
+ qcom,smem-state-names = "stop";
+
+ resets = <&gcc GCC_MSS_RESTART>;
+ reset-names = "mss_restart";
+
+ qcom,halt-regs = <&tcsr_regs_1 0x3000 0x5000 0x4000>;
+
+ power-domains = <&rpmpd SDM660_VDDCX>,
+ <&rpmpd SDM660_VDDMX>;
+ power-domain-names = "cx", "mx";
+
+ memory-region = <&mba_region>, <&mpss_region>;
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>;
+ label = "modem";
+ qcom,remote-pid = <1>;
+ mboxes = <&apcs_glb 15>;
+ };
+ };
+
adreno_gpu: gpu@5000000 {
compatible = "qcom,adreno-508.0", "qcom,adreno";
reg = <0x05000000 0x40000>;
reg-names = "kgsl_3d0_reg_memory";
- interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
<&gpucc GPUCC_RBBMTIMER_CLK>,
@@ -1038,6 +1101,7 @@
interconnect-names = "gfx-mem";
operating-points-v2 = <&gpu_sdm630_opp_table>;
+ #cooling-cells = <2>;
status = "disabled";
@@ -1047,43 +1111,43 @@
opp-hz = /bits/ 64 <775000000>;
opp-level = <RPM_SMD_LEVEL_TURBO>;
opp-peak-kBps = <5412000>;
- opp-supported-hw = <0xA2>;
+ opp-supported-hw = <0xa2>;
};
opp-647000000 {
opp-hz = /bits/ 64 <647000000>;
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
opp-peak-kBps = <4068000>;
- opp-supported-hw = <0xFF>;
+ opp-supported-hw = <0xff>;
};
opp-588000000 {
opp-hz = /bits/ 64 <588000000>;
opp-level = <RPM_SMD_LEVEL_NOM>;
opp-peak-kBps = <3072000>;
- opp-supported-hw = <0xFF>;
+ opp-supported-hw = <0xff>;
};
opp-465000000 {
opp-hz = /bits/ 64 <465000000>;
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
opp-peak-kBps = <2724000>;
- opp-supported-hw = <0xFF>;
+ opp-supported-hw = <0xff>;
};
opp-370000000 {
opp-hz = /bits/ 64 <370000000>;
opp-level = <RPM_SMD_LEVEL_SVS>;
opp-peak-kBps = <2188000>;
- opp-supported-hw = <0xFF>;
+ opp-supported-hw = <0xff>;
};
opp-240000000 {
opp-hz = /bits/ 64 <240000000>;
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
opp-peak-kBps = <1648000>;
- opp-supported-hw = <0xFF>;
+ opp-supported-hw = <0xff>;
};
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
opp-peak-kBps = <1200000>;
- opp-supported-hw = <0xFF>;
+ opp-supported-hw = <0xff>;
};
};
};
@@ -1104,7 +1168,9 @@
clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
<&gcc GCC_BIMC_GFX_CLK>,
<&gcc GCC_GPU_BIMC_GFX_CLK>;
- clock-names = "iface", "mem", "mem_iface";
+ clock-names = "iface",
+ "mem",
+ "mem_iface";
#global-interrupts = <2>;
#iommu-cells = <1>;
@@ -1178,11 +1244,11 @@
spmi_bus: spmi@800f000 {
compatible = "qcom,spmi-pmic-arb";
- reg = <0x0800f000 0x1000>,
- <0x08400000 0x1000000>,
- <0x09400000 0x1000000>,
- <0x0a400000 0x220000>,
- <0x0800a000 0x3000>;
+ reg = <0x0800f000 0x1000>,
+ <0x08400000 0x1000000>,
+ <0x09400000 0x1000000>,
+ <0x0a400000 0x220000>,
+ <0x0800a000 0x3000>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
@@ -1192,7 +1258,6 @@
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
- cell-index = <0>;
};
usb3: usb@a8f8800 {
@@ -1207,27 +1272,27 @@
<&gcc GCC_USB30_MASTER_CLK>,
<&gcc GCC_AGGRE2_USB3_AXI_CLK>,
<&gcc GCC_USB30_SLEEP_CLK>,
- <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>;
clock-names = "cfg_noc",
"core",
"iface",
"sleep",
- "mock_utmi",
- "bus";
+ "mock_utmi";
assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_MASTER_CLK>,
- <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
- assigned-clock-rates = <19200000>, <120000000>,
- <19200000>;
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <120000000>;
- interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq", "ss_phy_irq";
+ interrupt-names = "pwr_event",
+ "qusb2_phy",
+ "hs_phy_irq",
+ "ss_phy_irq";
power-domains = <&gcc USB_30_GDSC>;
- qcom,select-utmi-as-pipe-clk;
resets = <&gcc GCC_USB_30_BCR>;
@@ -1238,17 +1303,38 @@
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- /*
- * SDM630 technically supports USB3 but I
- * haven't seen any devices making use of it.
- */
- maximum-speed = "high-speed";
- phys = <&qusb2phy0>;
- phy-names = "usb2-phy";
+ phys = <&qusb2phy0>, <&usb3_qmpphy>;
+ phy-names = "usb2-phy", "usb3-phy";
snps,hird-threshold = /bits/ 8 <0>;
};
};
+ usb3_qmpphy: phy@c010000 {
+ compatible = "qcom,sdm660-qmp-usb3-phy";
+ reg = <0x0c010000 0x1000>;
+
+ clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB3_CLKREF_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "cfg_ahb",
+ "pipe";
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+
+ resets = <&gcc GCC_USB3_PHY_BCR>,
+ <&gcc GCC_USB3PHY_PHY_BCR>;
+ reset-names = "phy",
+ "phy_phy";
+
+ qcom,tcsr-reg = <&tcsr_regs_1 0x6b244>;
+
+ status = "disabled";
+ };
+
qusb2phy0: phy@c012000 {
compatible = "qcom,sdm660-qusb2-phy";
reg = <0x0c012000 0x180>;
@@ -1395,17 +1481,21 @@
clocks = <&gcc GCC_CFG_NOC_USB2_AXI_CLK>,
<&gcc GCC_USB20_MASTER_CLK>,
- <&gcc GCC_USB20_MOCK_UTMI_CLK>,
- <&gcc GCC_USB20_SLEEP_CLK>;
+ <&gcc GCC_USB20_SLEEP_CLK>,
+ <&gcc GCC_USB20_MOCK_UTMI_CLK>;
clock-names = "cfg_noc", "core",
- "mock_utmi", "sleep";
+ "sleep", "mock_utmi";
assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
<&gcc GCC_USB20_MASTER_CLK>;
assigned-clock-rates = <19200000>, <60000000>;
- interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hs_phy_irq";
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pwr_event",
+ "qusb2_phy",
+ "hs_phy_irq";
qcom,select-utmi-as-pipe-clk;
@@ -1446,34 +1536,15 @@
<&sleep_clk>,
<&gcc GCC_MMSS_GPLL0_CLK>,
<&gcc GCC_MMSS_GPLL0_DIV_CLK>,
- <&dsi0_phy 1>,
- <&dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi0_phy 0>,
<0>,
<0>,
<0>,
<0>;
};
- dsi_opp_table: opp-table-dsi {
- compatible = "operating-points-v2";
-
- opp-131250000 {
- opp-hz = /bits/ 64 <131250000>;
- required-opps = <&rpmpd_opp_svs>;
- };
-
- opp-210000000 {
- opp-hz = /bits/ 64 <210000000>;
- required-opps = <&rpmpd_opp_svs_plus>;
- };
-
- opp-262500000 {
- opp-hz = /bits/ 64 <262500000>;
- required-opps = <&rpmpd_opp_nom>;
- };
- };
-
- mdss: mdss@c900000 {
+ mdss: display-subsystem@c900000 {
compatible = "qcom,mdss";
reg = <0x0c900000 0x1000>,
<0x0c9b0000 0x1040>;
@@ -1500,8 +1571,8 @@
ranges;
status = "disabled";
- mdp: mdp@c901000 {
- compatible = "qcom,mdp5";
+ mdp: display-controller@c901000 {
+ compatible = "qcom,sdm630-mdp5", "qcom,mdp5";
reg = <0x0c901000 0x89000>;
reg-names = "mdp_phys";
@@ -1538,7 +1609,7 @@
port@0 {
reg = <0>;
mdp5_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
+ remote-endpoint = <&mdss_dsi0_in>;
};
};
};
@@ -1574,8 +1645,9 @@
};
};
- dsi0: dsi@c994000 {
- compatible = "qcom,mdss-dsi-ctrl";
+ mdss_dsi0: dsi@c994000 {
+ compatible = "qcom,sdm660-dsi-ctrl",
+ "qcom,mdss-dsi-ctrl";
reg = <0x0c994000 0x400>;
reg-names = "dsi_ctrl";
@@ -1587,8 +1659,8 @@
assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
<&mmcc PCLK0_CLK_SRC>;
- assigned-clock-parents = <&dsi0_phy 0>,
- <&dsi0_phy 1>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
clocks = <&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_BYTE0_CLK>,
@@ -1609,8 +1681,7 @@
"pixel",
"core";
- phys = <&dsi0_phy>;
- phy-names = "dsi";
+ phys = <&mdss_dsi0_phy>;
status = "disabled";
@@ -1620,20 +1691,20 @@
port@0 {
reg = <0>;
- dsi0_in: endpoint {
+ mdss_dsi0_in: endpoint {
remote-endpoint = <&mdp5_intf1_out>;
};
};
port@1 {
reg = <1>;
- dsi0_out: endpoint {
+ mdss_dsi0_out: endpoint {
};
};
};
};
- dsi0_phy: dsi-phy@c994400 {
+ mdss_dsi0_phy: phy@c994400 {
compatible = "qcom,dsi-phy-14nm-660";
reg = <0x0c994400 0x100>,
<0x0c994500 0x300>,
@@ -1896,7 +1967,7 @@
};
};
- camss: camss@ca00000 {
+ camss: camss@ca00020 {
compatible = "qcom,sdm660-camss";
reg = <0x0ca00020 0x10>,
<0x0ca30000 0x100>,
@@ -2142,10 +2213,9 @@
clocks = <&mmcc MNOC_AHB_CLK>,
<&mmcc BIMC_SMMU_AHB_CLK>,
- <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
<&mmcc BIMC_SMMU_AXI_CLK>;
clock-names = "iface-mm", "iface-smmu",
- "bus-mm", "bus-smmu";
+ "bus-smmu";
#global-interrupts = <2>;
#iommu-cells = <1>;
@@ -2218,12 +2288,12 @@
#address-cells = <1>;
#size-cells = <0>;
- q6core {
+ service@3 {
reg = <APR_SVC_ADSP_CORE>;
compatible = "qcom,q6core";
};
- q6afe: apr-service@4 {
+ q6afe: service@4 {
compatible = "qcom,q6afe";
reg = <APR_SVC_AFE>;
q6afedai: dais {
@@ -2234,7 +2304,7 @@
};
};
- q6asm: apr-service@7 {
+ q6asm: service@7 {
compatible = "qcom,q6asm";
reg = <APR_SVC_ASM>;
q6asmdai: dais {
@@ -2246,7 +2316,7 @@
};
};
- q6adm: apr-service@8 {
+ q6adm: service@8 {
compatible = "qcom,q6adm";
reg = <APR_SVC_ADM>;
q6routing: routing {
@@ -2262,16 +2332,11 @@
compatible = "qcom,sdm660-gnoc";
reg = <0x17900000 0xe000>;
#interconnect-cells = <1>;
- /*
- * This one apparently features no clocks,
- * so let's not mess with the driver needlessly
- */
- clock-names = "bus", "bus_a";
- clocks = <&xo_board>, <&xo_board>;
};
apcs_glb: mailbox@17911000 {
- compatible = "qcom,sdm660-apcs-hmss-global";
+ compatible = "qcom,sdm660-apcs-hmss-global",
+ "qcom,msm8994-apcs-kpss-global";
reg = <0x17911000 0x1000>;
#mbox-cells = <1>;
@@ -2287,50 +2352,50 @@
frame@17921000 {
frame-number = <0>;
- interrupts = <0 8 0x4>,
- <0 7 0x4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17921000 0x1000>,
<0x17922000 0x1000>;
};
frame@17923000 {
frame-number = <1>;
- interrupts = <0 9 0x4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17923000 0x1000>;
status = "disabled";
};
frame@17924000 {
frame-number = <2>;
- interrupts = <0 10 0x4>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17924000 0x1000>;
status = "disabled";
};
frame@17925000 {
frame-number = <3>;
- interrupts = <0 11 0x4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17925000 0x1000>;
status = "disabled";
};
frame@17926000 {
frame-number = <4>;
- interrupts = <0 12 0x4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17926000 0x1000>;
status = "disabled";
};
frame@17927000 {
frame-number = <5>;
- interrupts = <0 13 0x4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17927000 0x1000>;
status = "disabled";
};
frame@17928000 {
frame-number = <6>;
- interrupts = <0 14 0x4>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x17928000 0x1000>;
status = "disabled";
};
@@ -2351,12 +2416,6 @@
};
};
- tcsr_mutex: hwlock {
- compatible = "qcom,tcsr-mutex";
- syscon = <&tcsr_mutex_regs 0 0x1000>;
- #hwlock-cells = <1>;
- };
-
sound: sound {
};
@@ -2419,7 +2478,7 @@
type = "passive";
};
- cpu0_crit: cpu_crit {
+ cpu0_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -2440,7 +2499,7 @@
type = "passive";
};
- cpu1_crit: cpu_crit {
+ cpu1_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -2461,7 +2520,7 @@
type = "passive";
};
- cpu2_crit: cpu_crit {
+ cpu2_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -2482,7 +2541,7 @@
type = "passive";
};
- cpu3_crit: cpu_crit {
+ cpu3_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -2509,7 +2568,7 @@
type = "passive";
};
- pwr_cluster_crit: cpu_crit {
+ pwr_cluster_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -2523,6 +2582,13 @@
thermal-sensors = <&tsens 8>;
+ cooling-maps {
+ map0 {
+ trip = <&gpu_alert0>;
+ cooling-device = <&adreno_gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
trips {
gpu_alert0: trip-point0 {
temperature = <90000>;
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-19 18:50:31 +0000