summaryrefslogtreecommitdiffstats
path: root/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm64/qcom/sdm845-oneplus-common.dtsi')
-rw-r--r--dts/src/arm64/qcom/sdm845-oneplus-common.dtsi507
1 files changed, 365 insertions, 142 deletions
diff --git a/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi b/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi
index d435552237..e821103d49 100644
--- a/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi
+++ b/dts/src/arm64/qcom/sdm845-oneplus-common.dtsi
@@ -7,11 +7,14 @@
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
#include "sdm845.dtsi"
+#include "sdm845-wcd9340.dtsi"
#include "pm8998.dtsi"
#include "pmi8998.dtsi"
@@ -20,13 +23,30 @@
/ {
aliases {
serial0 = &uart9;
- hsuart0 = &uart6;
+ serial1 = &uart6;
};
chosen {
stdout-path = "serial0:115200n8";
};
+ gpio-hall-sensor {
+ compatible = "gpio-keys";
+ label = "Hall effect sensor";
+
+ pinctrl-0 = <&hall_sensor_default>;
+ pinctrl-names = "default";
+
+ event-hall-sensor {
+ gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
+ label = "Hall Effect Sensor";
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
label = "Volume keys";
@@ -35,27 +55,28 @@
pinctrl-names = "default";
pinctrl-0 = <&volume_down_gpio &volume_up_gpio>;
- vol-down {
+ key-vol-down {
label = "Volume down";
linux,code = <KEY_VOLUMEDOWN>;
- gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
};
- vol-up {
+ key-vol-up {
label = "Volume up";
linux,code = <KEY_VOLUMEUP>;
- gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
debounce-interval = <15>;
};
};
reserved-memory {
- /* The rmtfs_mem needs to be guarded due to "XPU limitations"
+ /*
+ * The rmtfs_mem needs to be guarded due to "XPU limitations"
* it is otherwise possible for an allocation adjacent to the
* rmtfs_mem region to trigger an XPU violation, causing a crash.
*/
- rmtfs_lower_guard: memory@f5b00000 {
+ rmtfs_lower_guard: rmtfs-lower-guard@f5b00000 {
no-map;
reg = <0 0xf5b00000 0 0x1000>;
};
@@ -64,15 +85,15 @@
* but given the same address every time. Hard code it as this address is
* where the modem firmware expects it to be.
*/
- rmtfs_mem: memory@f5b01000 {
+ rmtfs_mem: rmtfs-mem@f5b01000 {
compatible = "qcom,rmtfs-mem";
reg = <0 0xf5b01000 0 0x200000>;
no-map;
qcom,client-id = <1>;
- qcom,vmid = <15>;
+ qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
};
- rmtfs_upper_guard: memory@f5d01000 {
+ rmtfs_upper_guard: rmtfs-upper-guard@f5d01000 {
no-map;
reg = <0 0xf5d01000 0 0x1000>;
};
@@ -81,7 +102,7 @@
* It seems like reserving the old rmtfs_mem region is also needed to prevent
* random crashes which are most likely modem related, more testing needed.
*/
- removed_region: memory@88f00000 {
+ removed_region: removed-region@88f00000 {
no-map;
reg = <0 0x88f00000 0 0x1c00000>;
};
@@ -93,7 +114,6 @@
console-size = <0x40000>;
ftrace-size = <0x40000>;
pmsg-size = <0x200000>;
- devinfo-size = <0x1000>;
ecc-size = <16>;
};
};
@@ -146,7 +166,7 @@
};
&apps_rsc {
- pm8998-rpmh-regulators {
+ regulators-0 {
compatible = "qcom,pm8998-rpmh-regulators";
qcom,pmic-id = "a";
@@ -248,6 +268,12 @@
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
+ vreg_l23a_3p3: ldo23 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
vdda_qusb_hs0_3p1:
vreg_l24a_3p075: ldo24 {
regulator-min-microvolt = <3088000>;
@@ -276,7 +302,7 @@
};
};
- pmi8998-rpmh-regulators {
+ regulators-1 {
compatible = "qcom,pmi8998-rpmh-regulators";
qcom,pmic-id = "b";
@@ -290,7 +316,7 @@
};
};
- pm8005-rpmh-regulators {
+ regulators-2 {
compatible = "qcom,pm8005-rpmh-regulators";
qcom,pmic-id = "c";
@@ -311,49 +337,6 @@
firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn";
};
-&dsi0 {
- status = "okay";
- vdda-supply = <&vdda_mipi_dsi0_1p2>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- /*
- * Both devices use different panels but all other properties
- * are common. Compatible line is declared in device dts.
- */
- display_panel: panel@0 {
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0>;
-
- vddio-supply = <&vreg_l14a_1p88>;
-
- reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
-
- port {
- panel_in: endpoint {
- remote-endpoint = <&dsi0_out>;
- };
- };
- };
-};
-
-&dsi0_out {
- remote-endpoint = <&panel_in>;
- data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
- status = "okay";
- vdds-supply = <&vdda_mipi_dsi0_pll>;
-};
-
&gcc {
protected-clocks = <GCC_QSPI_CORE_CLK>,
<GCC_QSPI_CORE_CLK_SRC>,
@@ -362,13 +345,30 @@
<GCC_LPASS_SWAY_CLK>;
};
+&gmu {
+ status = "okay";
+};
+
&gpu {
+ status = "okay";
+
zap-shader {
memory-region = <&gpu_mem>;
firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn";
};
};
+&i2c10 {
+ status = "okay";
+ clock-frequency = <100000>;
+
+ bq27441_fg: bq27441-battery@55 {
+ compatible = "ti,bq27411";
+ status = "okay";
+ reg = <0x55>;
+ };
+};
+
&i2c12 {
status = "okay";
clock-frequency = <400000>;
@@ -405,28 +405,62 @@
};
&ipa {
- status = "okay";
-
+ qcom,gsi-loader = "self";
memory-region = <&ipa_fw_mem>;
firmware-name = "qcom/sdm845/oneplus6/ipa_fws.mbn";
+ status = "okay";
};
&mdss {
status = "okay";
};
-&mdss_mdp {
+&mdss_dsi0 {
+ status = "okay";
+ vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+ /*
+ * Both devices use different panels but all other properties
+ * are common. Compatible line is declared in device dts.
+ */
+ display_panel: panel@0 {
+ status = "disabled";
+
+ reg = <0>;
+
+ vddio-supply = <&vreg_l14a_1p88>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
status = "okay";
+ vdds-supply = <&vdda_mipi_dsi0_pll>;
};
-/* Modem/wifi*/
+/* Modem/wifi */
&mss_pil {
status = "okay";
firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn";
};
-&pm8998_gpio {
- volume_down_gpio: pm8998_gpio5 {
+&pm8998_gpios {
+ volume_down_gpio: pm8998-gpio5-state {
pinconf {
pins = "gpio5";
function = "normal";
@@ -436,7 +470,7 @@
};
};
- volume_up_gpio: pm8998_gpio6 {
+ volume_up_gpio: pm8998-gpio6-state {
pinconf {
pins = "gpio6";
function = "normal";
@@ -447,6 +481,70 @@
};
};
+&pmi8998_charger {
+ status = "okay";
+};
+
+&pmi8998_flash {
+ status = "okay";
+
+ led-0 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <1>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <1280000>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_YELLOW>;
+ led-sources = <2>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <1280000>;
+ };
+};
+
+&q6afedai {
+ qi2s@22 {
+ reg = <22>;
+ qcom,sd-lines = <1>;
+ };
+
+ qi2s@23 {
+ reg = <23>;
+ qcom,sd-lines = <0>;
+ };
+};
+
+&q6asmdai {
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+
+ dai@3 {
+ reg = <3>;
+ };
+
+ dai@4 {
+ reg = <4>;
+ };
+
+ dai@5 {
+ reg = <5>;
+ };
+};
+
&qupv3_id_1 {
status = "okay";
};
@@ -455,66 +553,171 @@
status = "okay";
};
+&qup_i2c10_default {
+ drive-strength = <2>;
+ bias-disable;
+};
+
&qup_i2c12_default {
- mux {
- pins = "gpio49", "gpio50";
- function = "qup12";
- drive-strength = <2>;
- bias-disable;
- };
+ drive-strength = <2>;
+ bias-disable;
};
-&qup_i2c10_default {
- pinconf {
- pins = "gpio55", "gpio56";
- drive-strength = <2>;
- bias-disable;
- };
+&qup_uart9_rx {
+ drive-strength = <2>;
+ bias-pull-up;
};
-&qup_uart9_default {
- pinconf-tx {
- pins = "gpio4";
- drive-strength = <2>;
- bias-disable;
+&qup_uart9_tx {
+ drive-strength = <2>;
+ bias-disable;
+};
+
+&slpi_pas {
+ firmware-name = "qcom/sdm845/oneplus6/slpi.mbn";
+ status = "okay";
+};
+
+&sound {
+ compatible = "qcom,sdm845-sndcard";
+ pinctrl-0 = <&quat_mi2s_active &quat_mi2s_sd0_active &quat_mi2s_sd1_active>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
};
- pinconf-rx {
- pins = "gpio5";
- drive-strength = <2>;
- bias-pull-up;
+ mm2-dai-link {
+ link-name = "MultiMedia2";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
};
-};
-/*
- * Prevent garbage data on bluetooth UART lines
- */
-&qup_uart6_default {
- pinmux {
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- function = "qup6";
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
};
- cts {
- pins = "gpio45";
- bias-pull-down;
+ mm4-dai-link {
+ link-name = "MultiMedia4";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+ };
};
- rts-tx {
- pins = "gpio46", "gpio47";
- drive-strength = <2>;
- bias-disable;
+ mm5-dai-link {
+ link-name = "MultiMedia5";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
+ };
};
- rx {
- pins = "gpio48";
- bias-pull-up;
+ mm6-dai-link {
+ link-name = "MultiMedia6";
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
+ };
+ };
+
+ speaker_playback_dai: speaker-dai-link {
+ link-name = "Speaker Playback";
+ cpu {
+ sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+ };
+
+ slim-dai-link {
+ link-name = "SLIM Playback 1";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 0>;
+ };
+ };
+
+ slimcap-dai-link {
+ link-name = "SLIM Capture 1";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 1>;
+ };
+ };
+
+ slim2-dai-link {
+ link-name = "SLIM Playback 2";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_1_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 2>; /* AIF2_PB */
+ };
+ };
+
+ slimcap2-dai-link {
+ link-name = "SLIM Capture 2";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_1_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 3>; /* AIF2_CAP */
+ };
+ };
+
+ slimcap3-dai-link {
+ link-name = "SLIM Capture 3";
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_2_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9340 5>; /* AIF3_CAP */
+ };
};
};
&uart6 {
status = "okay";
+ pinctrl-0 = <&qup_uart6_4pin>;
+
bluetooth {
compatible = "qcom,wcn3990-bt";
@@ -593,60 +796,80 @@
&tlmm {
gpio-reserved-ranges = <0 4>, <81 4>;
- tri_state_key_default: tri_state_key_default {
- mux {
- pins = "gpio40", "gpio42", "gpio26";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
+ hall_sensor_default: hall-sensor-default-state {
+ pins = "gpio124";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- ts_default_pins: ts-int {
- mux {
- pins = "gpio99", "gpio125";
- function = "gpio";
- drive-strength = <16>;
- bias-pull-up;
- };
+ tri_state_key_default: tri-state-key-default-state {
+ pins = "gpio40", "gpio42", "gpio26";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
};
- panel_reset_pins: panel-reset {
- mux {
- pins = "gpio6", "gpio25", "gpio26";
- function = "gpio";
- drive-strength = <8>;
- bias-disable = <0>;
- };
+ ts_default_pins: ts-int-state {
+ pins = "gpio99", "gpio125";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-pull-up;
};
- panel_te_pin: panel-te {
- mux {
- pins = "gpio10";
- function = "mdp_vsync";
- drive-strength = <2>;
- bias-disable;
- input-enable;
- };
+ panel_reset_pins: panel-reset-state {
+ pins = "gpio6", "gpio25", "gpio26";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
};
- panel_esd_pin: panel-esd {
- mux {
- pins = "gpio30";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- input-enable;
- };
+ panel_te_pin: panel-te-state {
+ pins = "gpio10";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ panel_esd_pin: panel-esd-state {
+ pins = "gpio30";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ speaker_default: speaker-default-state {
+ pins = "gpio69";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-pull-up;
+ output-high;
};
};
+&venus {
+ status = "okay";
+ firmware-name = "qcom/sdm845/oneplus6/venus.mbn";
+};
+
+&wcd9340 {
+ pinctrl-0 = <&wcd_intr_default>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
+ vdd-buck-supply = <&vreg_s4a_1p8>;
+ vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+ vdd-tx-supply = <&vreg_s4a_1p8>;
+ vdd-rx-supply = <&vreg_s4a_1p8>;
+ vdd-io-supply = <&vreg_s4a_1p8>;
+};
+
&wifi {
status = "okay";
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
+ vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
qcom,snoc-host-cap-8bit-quirk;
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-23 13:30:47 +0000