diff options
Diffstat (limited to 'dts/src/arm64/qcom/sm8150-sony-xperia-kumano.dtsi')
-rw-r--r-- | dts/src/arm64/qcom/sm8150-sony-xperia-kumano.dtsi | 431 |
1 files changed, 424 insertions, 7 deletions
diff --git a/dts/src/arm64/qcom/sm8150-sony-xperia-kumano.dtsi b/dts/src/arm64/qcom/sm8150-sony-xperia-kumano.dtsi index 014fe3a315..ae0ca48b89 100644 --- a/dts/src/arm64/qcom/sm8150-sony-xperia-kumano.dtsi +++ b/dts/src/arm64/qcom/sm8150-sony-xperia-kumano.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8150.dtsi" #include "pm8150.dtsi" @@ -33,9 +34,10 @@ framebuffer: framebuffer@9c000000 { compatible = "simple-framebuffer"; reg = <0 0x9c000000 0 0x2300000>; - width = <1644>; - height = <3840>; - stride = <(1644 * 4)>; + /* Griffin BL initializes in 2.5k mode, not 4k */ + width = <1096>; + height = <2560>; + stride = <(1096 * 4)>; format = "a8r8g8b8"; /* * That's (going to be) a lot of clocks, but it's necessary due @@ -46,6 +48,100 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>; + + key-camera-focus { + label = "Camera Focus"; + linux,code = <KEY_CAMERA_FOCUS>; + gpios = <&pm8150b_gpios 2 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-camera-snapshot { + label = "Camera Snapshot"; + linux,code = <KEY_CAMERA>; + gpios = <&pm8150b_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + + key-vol-down { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + cam0_vdig_vreg: cam0-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera0_vdig_vreg"; + gpio = <&tlmm 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&main_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam1_vdig_vreg: cam1-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera1_vdig_vreg"; + gpio = <&tlmm 79 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&sub_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam2_vdig_vreg: cam2-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera2_vdig_vreg"; + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&chat_cam_pwr_en>; + pinctrl-names = "default"; + }; + + cam3_vdig_vreg: cam3-vdig-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera3_vdig_vreg"; + gpio = <&pm8150_gpios 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&supwc_pwr_en>; + pinctrl-names = "default"; + }; + + cam_vmdr_vreg: cam-vmdr-regulator { + compatible = "regulator-fixed"; + regulator-name = "camera_vmdr_vreg"; + gpio = <&pm8150l_gpios 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&main_cam_pwr_vmdr_en>; + pinctrl-names = "default"; + }; + + rgbcir_vreg: rgbcir-regulator { + compatible = "regulator-fixed"; + regulator-name = "rgbcir_vreg"; + gpio = <&tlmm 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&rgbc_ir_pwr_en>; + pinctrl-names = "default"; + }; + vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; @@ -126,7 +222,7 @@ reg = <0x0 0xffc00000 0x0 0x100000>; record-size = <0x1000>; console-size = <0x40000>; - msg-size = <0x20000 0x20000>; + pmsg-size = <0x20000>; ecc-size = <16>; no-map; }; @@ -138,7 +234,7 @@ }; &apps_rsc { - pm8150-rpmh-regulators { + regulators-0 { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; @@ -271,7 +367,7 @@ }; }; - pm8150l-rpmh-regulators { + regulators-1 { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; @@ -348,6 +444,8 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l7c_3p0: ldo7 { @@ -367,6 +465,8 @@ regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; }; vreg_l10c_3p3: ldo10 { @@ -390,8 +490,18 @@ /* Qcom SMB1355 @ c */ /* Qcom SMB1390 @ 10 */ - /* NXP PN553 NFC @ 28 */ /* Qcom FSA4480 USB-C audio switch @ 43 */ + + nfc@28 { + compatible = "nxp,nxp-nci-i2c"; + reg = <0x28>; + + interrupt-parent = <&tlmm>; + interrupts = <47 IRQ_TYPE_EDGE_RISING>; + + enable-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; + }; }; &i2c7 { @@ -406,10 +516,100 @@ /* Samsung touchscreen @ 48 */ }; +&pm8150_gpios { + gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */ + "", + "NC", + "NC", + "", + "NC", + "SUPWC_PWR_EN", + "", + "NC", + "NC"; /* GPIO_10 */ + + vol_down_n: vol-down-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + supwc_pwr_en: supwc-pwr-en-state { + pins = "gpio7"; + function = "normal"; + qcom,drive-strength = <1>; + power-source = <1>; + drive-push-pull; + output-low; + }; +}; + +&pm8150b_gpios { + gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */ + "FOCUS_N", + "NC", + "NC", + "RF_LCD_ID_EN", + "NC", + "TS_VDDH_EN", + "LCD_ID", + "", + "NC", /* GPIO_10 */ + "NC", + "RF_ID"; + + snapshot_n: snapshot-n-state { + pins = "gpio1"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; + + focus_n: focus-n-state { + pins = "gpio2"; + function = "normal"; + power-source = <0>; + bias-pull-up; + input-enable; + }; +}; + +&pm8150l_gpios { + gpio-line-names = "TS_VDDIO_EN", /* GPIO_1 */ + "NC", + "MAIN_CAM_PWR_VMDR_EN", + "NC", + "", + "NC", + "NC", + "FP_LDO_EN", + "NC", + "NC", /* GPIO_10 */ + "NC", + "NC"; + + main_cam_pwr_vmdr_en: main-cam-pwr-vmdr-en-state { + pins = "gpio3"; + function = "normal"; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>; + power-source = <0>; + drive-push-pull; + output-low; + }; +}; + &pon_pwrkey { status = "okay"; }; +&pon_resin { + linux,code = <KEY_VOLUMEUP>; + status = "okay"; +}; + &qupv3_id_0 { status = "okay"; }; @@ -418,8 +618,225 @@ status = "okay"; }; +&sdhc_2 { + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_2p9>; + cd-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + no-sdio; + no-mmc; + + status = "okay"; +}; + &tlmm { gpio-reserved-ranges = <126 4>; + gpio-line-names = "NFC_ESE_SPI_MISO", /* GPIO_0 */ + "NFC_ESE_SPI_MOSI", + "NFC_ESE_SPI_SCLK", + "NFC_ESE_SPI_CS_N", + "NC", + "NC", + "DISP_RESET_N", + "DEBUG_GPIO0", + "MDP_VSYNC_P", + "TS_I2C_SDA", + "TS_I2C_SCL", /* GPIO_10 */ + "CAM_SOF", + "CAM2_RST_N", + "CAM_MCLK0", + "CAM_MCLK1", + "CAM_MCLK2", + "CAM_MCLK3", + "CCI_I2C_SDA0", + "CCI_I2C_SCL0", + "CCI_I2C_SDA1", + "CCI_I2C_SCL1", /* GPIO_20 */ + "NC", + "MAIN_CAM_PWR_EN", + "CAM3_RST_N", + "NC", + "CHAT_CAM_PWR_EN", + "NC", + "NC", + "CAM0_RST_N", + "RGBC_IR_PWR_EN", + "CAM1_RST_N", /* GPIO_30 */ + "CCI_I2C_SDA2", + "CCI_I2C_SCL2", + "CCI_I2C_SDA3", + "CCI_I2C_SCL3", + "NC", + "DEBUG_GPIO1", + "RGBC_IR_INT", + "USB_CC_DIR", + "NC", + "NC", /* GPIO_40 */ + "NFC_EN", + "NFC_ESE_PWR_REQ", + "BT_HCI_UART_CTS_N", + "BT_HCI_UART_RFR_N", + "BT_HCI_UART_TXD", + "BT_HCI_UART_RXD", + "NFC_IRQ", + "NFC_DWL_REQ", + "UIM2_DETECT_EN", + "WLAN_SW_CTRL", /* GPIO_50 */ + "APPS_I2C_SDA", + "APPS_I2C_SCL", + "NC", + "TS_RESET_N", + "NC", + "NC", + "NC", + "NC", + "HW_ID_0", + "NC", /* GPIO_60 */ + "QLINK_REQUEST", + "QLINK_ENABLE", + "WMSS_RESET_N", + "SDM_GRFC_8", + "WDOG_DISABLE", + "NC", + "NC", + "PA_INDICATOR_OR", + "MSS_LTE_COXM_TXD", + "MSS_LTE_COXM_RXD", /* GPIO_70 */ + "SDM_RFFE0_DATA", + "SDM_RFFE0_CLK", + "SDM_RFFE1_DATA", + "SDM_RFFE1_CLK", + "SDM_RFFE2_DATA", + "SDM_RFFE2_CLK", + "SDM_RFFE3_DATA", + "SDM_RFFE3_CLK", + "SUB_CAM_PWR_EN", + "FP_RESET_N", /* GPIO_80 */ + "NC", + "NC", + "NC", + "NC", + "DEBUG_UART_TX", + "DEBUG_UART_RX", + "DVDT_WRT_DET_AND", + "NC", + "NC", + "NC", /* GPIO_90 */ + "NC", + "NC", + "NC", + "NC", + "UDON_SWITCH_SEL", + "SD_CARD_DET_N", + "NC", + "CAMSENSOR_I2C_SDA", + "CAMSENSOR_I2C_SCL", + "USB_AUDIO_EN1", /* GPIO_100 */ + "DISP_ERR_FG", + "NC", + "NC", + "NC", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RESET", + "UIM2_DET", + "UIM1_DATA", + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", + "UIM1_PRESENT", + "NFC_CLK_REQ", + "SW_SERVICE", + "NC", + "RF_ID_EXTENSION", + "ALS_PROX_INT_N", + "FP_INT", + "DVDT_WRT_DET_OR", + "BAROMETER_INT", /* GPIO_120 */ + "ACC_COVER_OPEN", + "TS_INT_N", + "CODEC_INT1_N", + "CODEC_INT2_N", + "TX_GTR_THRES_IN", + "FP_SPI_MISO", + "FP_SPI_MOSI", + "FP_SPI_SCLK", + "FP_SPI_CS_N", + "NC", /* GPIO_130 */ + "DVDT_ENABLE", + "ACCEL_INT", + "NC", + "MAG_INT_N", + "NC", + "FORCED_USB_BOOT", + "NC", + "NC", + "HW_ID_1", + "NC", /* GPIO_140 */ + "NC", + "NC", + "CODEC_RST_N", + "CDC_SPI_MISO", + "CDC_SPI_MOSI", + "CDC_SPI_SCLK", + "CDC_SPI_CS_N", + "NC", + "LPASS_SLIMBUS_CLK", + "LPASS_SLIMBUS_DATA0", /* GPIO_150 */ + "LPASS_SLIMBUS_DATA1", + "USB_AUDIO_EN2", + "BT_FM_SLIMBUS_DATA", + "BT_FM_SLIMBUS_CLK", + "COMPASS_I2C_SDA", + "COMPASS_I2C_SCL", + "SSC_SPI_1_MISO", + "SSC_SPI_1_MOSI", + "SSC_SPI_1_CLK", + "SSC_SPI_1_CS_N", /* GPIO_160 */ + "SSC_SENSOR_I2C_SDA", + "SSC_SENSOR_I2C_SCL", + "NC", + "NC", + "NC", + "NC", + "SSC_UART_1_TX", + "SSC_UART_1_RX", + "WL_CMD_CLK_CHAIN0", + "WL_CMD_DATA_CHAIN0", /* GPIO_170 */ + "WL_CMD_CLK_CHAIN1", + "WL_CMD_DATA_CHAIN1", + "WL_BT_COEX_CLK", + "WL_BT_COEX_DATA"; + + main_cam_pwr_en: main-cam-pwr-en-state { + pins = "gpio22"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + chat_cam_pwr_en: chat-cam-pwr-en-state { + pins = "gpio25"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + rgbc_ir_pwr_en: rgbc-ir-pwr-en-state { + pins = "gpio29"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + sub_cam_pwr_en: sub-cam-pwr-en-state { + pins = "gpio79"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; }; &uart2 { |