summaryrefslogtreecommitdiffstats
path: root/dts/src/arm64/qcom/sm8150.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm64/qcom/sm8150.dtsi')
-rw-r--r--dts/src/arm64/qcom/sm8150.dtsi1767
1 files changed, 1298 insertions, 469 deletions
diff --git a/dts/src/arm64/qcom/sm8150.dtsi b/dts/src/arm64/qcom/sm8150.dtsi
index 81b4ff2cc4..761a6757dc 100644
--- a/dts/src/arm64/qcom/sm8150.dtsi
+++ b/dts/src/arm64/qcom/sm8150.dtsi
@@ -5,10 +5,13 @@
*/
#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8150.h>
#include <dt-bindings/clock/qcom,gcc-sm8150.h>
#include <dt-bindings/clock/qcom,gpucc-sm8150.h>
#include <dt-bindings/interconnect/qcom,osm-l3.h>
@@ -47,22 +50,27 @@
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x0>;
+ clocks = <&cpufreq_hw 0>;
enable-method = "psci";
capacity-dmips-mhz = <488>;
dynamic-power-coefficient = <232>;
next-level-cache = <&L2_0>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&CPU_PD0>;
power-domain-names = "psci";
#cooling-cells = <2>;
L2_0: l2-cache {
compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
next-level-cache = <&L3_0>;
L3_0: l3-cache {
- compatible = "cache";
+ compatible = "cache";
+ cache-level = <3>;
+ cache-unified;
};
};
};
@@ -71,41 +79,46 @@
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x100>;
+ clocks = <&cpufreq_hw 0>;
enable-method = "psci";
capacity-dmips-mhz = <488>;
dynamic-power-coefficient = <232>;
next-level-cache = <&L2_100>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&CPU_PD1>;
power-domain-names = "psci";
#cooling-cells = <2>;
L2_100: l2-cache {
compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
next-level-cache = <&L3_0>;
};
-
};
CPU2: cpu@200 {
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x200>;
+ clocks = <&cpufreq_hw 0>;
enable-method = "psci";
capacity-dmips-mhz = <488>;
dynamic-power-coefficient = <232>;
next-level-cache = <&L2_200>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&CPU_PD2>;
power-domain-names = "psci";
#cooling-cells = <2>;
L2_200: l2-cache {
compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
next-level-cache = <&L3_0>;
};
};
@@ -114,19 +127,22 @@
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x300>;
+ clocks = <&cpufreq_hw 0>;
enable-method = "psci";
capacity-dmips-mhz = <488>;
dynamic-power-coefficient = <232>;
next-level-cache = <&L2_300>;
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&CPU_PD3>;
power-domain-names = "psci";
#cooling-cells = <2>;
L2_300: l2-cache {
compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
next-level-cache = <&L3_0>;
};
};
@@ -135,19 +151,22 @@
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x400>;
+ clocks = <&cpufreq_hw 1>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <369>;
next-level-cache = <&L2_400>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&CPU_PD4>;
power-domain-names = "psci";
#cooling-cells = <2>;
L2_400: l2-cache {
compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
next-level-cache = <&L3_0>;
};
};
@@ -156,19 +175,22 @@
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x500>;
+ clocks = <&cpufreq_hw 1>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <369>;
next-level-cache = <&L2_500>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&CPU_PD5>;
power-domain-names = "psci";
#cooling-cells = <2>;
L2_500: l2-cache {
compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
next-level-cache = <&L3_0>;
};
};
@@ -177,19 +199,22 @@
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x600>;
+ clocks = <&cpufreq_hw 1>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <369>;
next-level-cache = <&L2_600>;
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&CPU_PD6>;
power-domain-names = "psci";
#cooling-cells = <2>;
L2_600: l2-cache {
compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
next-level-cache = <&L3_0>;
};
};
@@ -198,19 +223,22 @@
device_type = "cpu";
compatible = "qcom,kryo485";
reg = <0x0 0x700>;
+ clocks = <&cpufreq_hw 2>;
enable-method = "psci";
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <421>;
next-level-cache = <&L2_700>;
qcom,freq-domain = <&cpufreq_hw 2>;
operating-points-v2 = <&cpu7_opp_table>;
- interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
+ interconnects = <&gem_noc MASTER_AMPSS_M0 0 &mc_virt SLAVE_EBI_CH0 0>,
<&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>;
power-domains = <&CPU_PD7>;
power-domain-names = "psci";
#cooling-cells = <2>;
L2_700: l2-cache {
compatible = "cache";
+ cache-level = <2>;
+ cache-unified;
next-level-cache = <&L3_0>;
};
};
@@ -278,17 +306,15 @@
domain-idle-states {
CLUSTER_SLEEP_0: cluster-sleep-0 {
compatible = "domain-idle-state";
- idle-state-name = "cluster-power-collapse";
arm,psci-suspend-param = <0x4100c244>;
entry-latency-us = <3263>;
exit-latency-us = <6562>;
min-residency-us = <9987>;
- local-timer-stop;
};
};
};
- cpu0_opp_table: cpu0_opp_table {
+ cpu0_opp_table: opp-table-cpu0 {
compatible = "operating-points-v2";
opp-shared;
@@ -383,7 +409,7 @@
};
};
- cpu4_opp_table: cpu4_opp_table {
+ cpu4_opp_table: opp-table-cpu4 {
compatible = "operating-points-v2";
opp-shared;
@@ -473,7 +499,7 @@
};
};
- cpu7_opp_table: cpu7_opp_table {
+ cpu7_opp_table: opp-table-cpu7 {
compatible = "operating-points-v2";
opp-shared;
@@ -585,12 +611,6 @@
};
};
- tcsr_mutex: hwlock {
- compatible = "qcom,tcsr-mutex";
- syscon = <&tcsr_mutex_regs 0 0x1000>;
- #hwlock-cells = <1>;
- };
-
memory@80000000 {
device_type = "memory";
/* We expect the bootloader to fill in the size */
@@ -606,55 +626,55 @@
compatible = "arm,psci-1.0";
method = "smc";
- CPU_PD0: cpu0 {
+ CPU_PD0: power-domain-cpu0 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
};
- CPU_PD1: cpu1 {
+ CPU_PD1: power-domain-cpu1 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
};
- CPU_PD2: cpu2 {
+ CPU_PD2: power-domain-cpu2 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
};
- CPU_PD3: cpu3 {
+ CPU_PD3: power-domain-cpu3 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
};
- CPU_PD4: cpu4 {
+ CPU_PD4: power-domain-cpu4 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&BIG_CPU_SLEEP_0>;
};
- CPU_PD5: cpu5 {
+ CPU_PD5: power-domain-cpu5 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&BIG_CPU_SLEEP_0>;
};
- CPU_PD6: cpu6 {
+ CPU_PD6: power-domain-cpu6 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&BIG_CPU_SLEEP_0>;
};
- CPU_PD7: cpu7 {
+ CPU_PD7: power-domain-cpu7 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
domain-idle-states = <&BIG_CPU_SLEEP_0>;
};
- CLUSTER_PD: cpu-cluster0 {
+ CLUSTER_PD: power-domain-cpu-cluster0 {
#power-domain-cells = <0>;
domain-idle-states = <&CLUSTER_SLEEP_0>;
};
@@ -702,7 +722,7 @@
no-map;
qcom,client-id = <1>;
- qcom,vmid = <15>;
+ qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
};
camera_mem: memory@8b700000 {
@@ -893,8 +913,8 @@
};
gpi_dma0: dma-controller@800000 {
- compatible = "qcom,sm8150-gpi-dma";
- reg = <0 0x800000 0 0x60000>;
+ compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
+ reg = <0 0x00800000 0 0x60000>;
interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
@@ -915,6 +935,44 @@
status = "disabled";
};
+ ethernet: ethernet@20000 {
+ compatible = "qcom,sm8150-ethqos";
+ reg = <0x0 0x00020000 0x0 0x10000>,
+ <0x0 0x00036000 0x0 0x100>;
+ reg-names = "stmmaceth", "rgmii";
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+ clocks = <&gcc GCC_EMAC_AXI_CLK>,
+ <&gcc GCC_EMAC_SLV_AHB_CLK>,
+ <&gcc GCC_EMAC_PTP_CLK>,
+ <&gcc GCC_EMAC_RGMII_CLK>;
+ interrupts = <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
+
+ power-domains = <&gcc EMAC_GDSC>;
+ resets = <&gcc GCC_EMAC_BCR>;
+
+ iommus = <&apps_smmu 0x3c0 0x0>;
+
+ snps,tso;
+ rx-fifo-depth = <4096>;
+ tx-fifo-depth = <4096>;
+
+ status = "disabled";
+ };
+
+ qfprom: efuse@784000 {
+ compatible = "qcom,sm8150-qfprom", "qcom,qfprom";
+ reg = <0 0x00784000 0 0x8ff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ gpu_speed_bin: gpu_speed_bin@133 {
+ reg = <0x133 0x1>;
+ bits = <5 3>;
+ };
+ };
+
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x008c0000 0x0 0x6000>;
@@ -932,6 +990,9 @@
reg = <0 0x00880000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
@@ -942,10 +1003,13 @@
spi0: spi@880000 {
compatible = "qcom,geni-spi";
- reg = <0 0x880000 0 0x4000>;
+ reg = <0 0x00880000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
@@ -960,6 +1024,9 @@
reg = <0 0x00884000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
@@ -970,10 +1037,13 @@
spi1: spi@884000 {
compatible = "qcom,geni-spi";
- reg = <0 0x884000 0 0x4000>;
+ reg = <0 0x00884000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
@@ -988,6 +1058,9 @@
reg = <0 0x00888000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
@@ -998,10 +1071,13 @@
spi2: spi@888000 {
compatible = "qcom,geni-spi";
- reg = <0 0x888000 0 0x4000>;
+ reg = <0 0x00888000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
@@ -1016,6 +1092,9 @@
reg = <0 0x0088c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
@@ -1026,10 +1105,13 @@
spi3: spi@88c000 {
compatible = "qcom,geni-spi";
- reg = <0 0x88c000 0 0x4000>;
+ reg = <0 0x0088c000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
@@ -1044,6 +1126,9 @@
reg = <0 0x00890000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
@@ -1054,10 +1139,13 @@
spi4: spi@890000 {
compatible = "qcom,geni-spi";
- reg = <0 0x890000 0 0x4000>;
+ reg = <0 0x00890000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+ dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
@@ -1072,6 +1160,9 @@
reg = <0 0x00894000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
@@ -1082,10 +1173,13 @@
spi5: spi@894000 {
compatible = "qcom,geni-spi";
- reg = <0 0x894000 0 0x4000>;
+ reg = <0 0x00894000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+ dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
@@ -1100,6 +1194,9 @@
reg = <0 0x00898000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
@@ -1110,10 +1207,13 @@
spi6: spi@898000 {
compatible = "qcom,geni-spi";
- reg = <0 0x898000 0 0x4000>;
+ reg = <0 0x00898000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+ dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
@@ -1128,9 +1228,12 @@
reg = <0 0x0089c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c7_default>;
- interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1138,10 +1241,13 @@
spi7: spi@89c000 {
compatible = "qcom,geni-spi";
- reg = <0 0x89c000 0 0x4000>;
+ reg = <0 0x0089c000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+ dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi7_default>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
@@ -1153,8 +1259,8 @@
};
gpi_dma1: dma-controller@a00000 {
- compatible = "qcom,sm8150-gpi-dma";
- reg = <0 0xa00000 0 0x60000>;
+ compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
+ reg = <0 0x00a00000 0 0x60000>;
interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
@@ -1192,6 +1298,9 @@
reg = <0 0x00a80000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c8_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
@@ -1202,10 +1311,13 @@
spi8: spi@a80000 {
compatible = "qcom,geni-spi";
- reg = <0 0xa80000 0 0x4000>;
+ reg = <0 0x00a80000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi8_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
@@ -1220,6 +1332,9 @@
reg = <0 0x00a84000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c9_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
@@ -1230,10 +1345,13 @@
spi9: spi@a84000 {
compatible = "qcom,geni-spi";
- reg = <0 0xa84000 0 0x4000>;
+ reg = <0 0x00a84000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi9_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
@@ -1243,11 +1361,25 @@
status = "disabled";
};
+ uart9: serial@a84000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x00a84000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart9_default>;
+ pinctrl-names = "default";
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
i2c10: i2c@a88000 {
compatible = "qcom,geni-i2c";
reg = <0 0x00a88000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c10_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
@@ -1258,10 +1390,13 @@
spi10: spi@a88000 {
compatible = "qcom,geni-spi";
- reg = <0 0xa88000 0 0x4000>;
+ reg = <0 0x00a88000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi10_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
@@ -1276,6 +1411,9 @@
reg = <0 0x00a8c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c11_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
@@ -1286,10 +1424,13 @@
spi11: spi@a8c000 {
compatible = "qcom,geni-spi";
- reg = <0 0xa8c000 0 0x4000>;
+ reg = <0 0x00a8c000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi11_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
@@ -1313,6 +1454,9 @@
reg = <0 0x00a90000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
@@ -1323,10 +1467,13 @@
spi12: spi@a90000 {
compatible = "qcom,geni-spi";
- reg = <0 0xa90000 0 0x4000>;
+ reg = <0 0x00a90000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
@@ -1338,9 +1485,12 @@
i2c16: i2c@94000 {
compatible = "qcom,geni-i2c";
- reg = <0 0x0094000 0 0x4000>;
+ reg = <0 0x00094000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c16_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
@@ -1351,10 +1501,13 @@
spi16: spi@a94000 {
compatible = "qcom,geni-spi";
- reg = <0 0xa94000 0 0x4000>;
+ reg = <0 0x00a94000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi16_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
@@ -1366,8 +1519,8 @@
};
gpi_dma2: dma-controller@c00000 {
- compatible = "qcom,sm8150-gpi-dma";
- reg = <0 0xc00000 0 0x60000>;
+ compatible = "qcom,sm8150-gpi-dma", "qcom,sdm845-gpi-dma";
+ reg = <0 0x00c00000 0 0x60000>;
interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
@@ -1406,6 +1559,9 @@
reg = <0 0x00c80000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c17_default>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
@@ -1416,10 +1572,13 @@
spi17: spi@c80000 {
compatible = "qcom,geni-spi";
- reg = <0 0xc80000 0 0x4000>;
+ reg = <0 0x00c80000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+ dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi17_default>;
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
@@ -1434,6 +1593,9 @@
reg = <0 0x00c84000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c18_default>;
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
@@ -1444,10 +1606,13 @@
spi18: spi@c84000 {
compatible = "qcom,geni-spi";
- reg = <0 0xc84000 0 0x4000>;
+ reg = <0 0x00c84000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+ dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi18_default>;
interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
@@ -1462,6 +1627,9 @@
reg = <0 0x00c88000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c19_default>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
@@ -1472,10 +1640,13 @@
spi19: spi@c88000 {
compatible = "qcom,geni-spi";
- reg = <0 0xc88000 0 0x4000>;
+ reg = <0 0x00c88000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+ dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi19_default>;
interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
@@ -1490,6 +1661,9 @@
reg = <0 0x00c8c000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c13_default>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
@@ -1500,10 +1674,13 @@
spi13: spi@c8c000 {
compatible = "qcom,geni-spi";
- reg = <0 0xc8c000 0 0x4000>;
+ reg = <0 0x00c8c000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+ dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi13_default>;
interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
@@ -1518,6 +1695,9 @@
reg = <0 0x00c90000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c14_default>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
@@ -1528,10 +1708,13 @@
spi14: spi@c90000 {
compatible = "qcom,geni-spi";
- reg = <0 0xc90000 0 0x4000>;
+ reg = <0 0x00c90000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+ dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi14_default>;
interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
@@ -1546,6 +1729,9 @@
reg = <0 0x00c94000 0 0x4000>;
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+ <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c15_default>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
@@ -1556,10 +1742,13 @@
spi15: spi@c94000 {
compatible = "qcom,geni-spi";
- reg = <0 0xc94000 0 0x4000>;
+ reg = <0 0x00c94000 0 0x4000>;
reg-names = "se";
clock-names = "se";
clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+ dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+ <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_spi15_default>;
interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
@@ -1573,59 +1762,253 @@
config_noc: interconnect@1500000 {
compatible = "qcom,sm8150-config-noc";
reg = <0 0x01500000 0 0x7400>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system_noc: interconnect@1620000 {
compatible = "qcom,sm8150-system-noc";
reg = <0 0x01620000 0 0x19400>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mc_virt: interconnect@163a000 {
compatible = "qcom,sm8150-mc-virt";
reg = <0 0x0163a000 0 0x1000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre1_noc: interconnect@16e0000 {
compatible = "qcom,sm8150-aggre1-noc";
reg = <0 0x016e0000 0 0xd080>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
aggre2_noc: interconnect@1700000 {
compatible = "qcom,sm8150-aggre2-noc";
reg = <0 0x01700000 0 0x20000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
compute_noc: interconnect@1720000 {
compatible = "qcom,sm8150-compute-noc";
reg = <0 0x01720000 0 0x7000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
mmss_noc: interconnect@1740000 {
compatible = "qcom,sm8150-mmss-noc";
reg = <0 0x01740000 0 0x1c100>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
system-cache-controller@9200000 {
compatible = "qcom,sm8150-llcc";
- reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>;
- reg-names = "llcc_base", "llcc_broadcast_base";
+ reg = <0 0x09200000 0 0x50000>, <0 0x09280000 0 0x50000>,
+ <0 0x09300000 0 0x50000>, <0 0x09380000 0 0x50000>,
+ <0 0x09600000 0 0x50000>;
+ reg-names = "llcc0_base", "llcc1_base", "llcc2_base",
+ "llcc3_base", "llcc_broadcast_base";
interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
};
+ dma@10a2000 {
+ compatible = "qcom,sm8150-dcc", "qcom,dcc";
+ reg = <0x0 0x010a2000 0x0 0x1000>,
+ <0x0 0x010ad000 0x0 0x3000>;
+ };
+
+ pcie0: pcie@1c00000 {
+ compatible = "qcom,pcie-sm8150";
+ reg = <0 0x01c00000 0 0x3000>,
+ <0 0x60000000 0 0xf1d>,
+ <0 0x60000f20 0 0xa8>,
+ <0 0x60001000 0 0x1000>,
+ <0 0x60100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+ <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "tbu";
+
+ iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
+ <0x100 &apps_smmu 0x1d81 0x1>;
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc PCIE_0_GDSC>;
+
+ phys = <&pcie0_phy>;
+ phy-names = "pciephy";
+
+ perst-gpios = <&tlmm 35 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie0_default_state>;
+
+ status = "disabled";
+ };
+
+ pcie0_phy: phy@1c06000 {
+ compatible = "qcom,sm8150-qmp-gen3x1-pcie-phy";
+ reg = <0 0x01c06000 0 0x1000>;
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_CLKREF_CLK>,
+ <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_0_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
+
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ status = "disabled";
+ };
+
+ pcie1: pcie@1c08000 {
+ compatible = "qcom,pcie-sm8150";
+ reg = <0 0x01c08000 0 0x3000>,
+ <0 0x40000000 0 0xf1d>,
+ <0 0x40000f20 0 0xa8>,
+ <0 0x40001000 0 0x1000>,
+ <0 0x40100000 0 0x100000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config";
+ device_type = "pci";
+ linux,pci-domain = <1>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <2>;
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+ <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+
+ interrupts = <GIC_SPI 307 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+ <&gcc GCC_PCIE_1_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>,
+ <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave",
+ "slave_q2a",
+ "tbu";
+
+ assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ iommu-map = <0x0 &apps_smmu 0x1e00 0x1>,
+ <0x100 &apps_smmu 0x1e01 0x1>;
+
+ resets = <&gcc GCC_PCIE_1_BCR>;
+ reset-names = "pci";
+
+ power-domains = <&gcc PCIE_1_GDSC>;
+
+ phys = <&pcie1_phy>;
+ phy-names = "pciephy";
+
+ perst-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_default_state>;
+
+ status = "disabled";
+ };
+
+ pcie1_phy: phy@1c0e000 {
+ compatible = "qcom,sm8150-qmp-gen3x2-pcie-phy";
+ reg = <0 0x01c0e000 0 0x1000>;
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_CLKREF_CLK>,
+ <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+ <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "aux",
+ "cfg_ahb",
+ "ref",
+ "refgen",
+ "pipe";
+
+ clock-output-names = "pcie_1_pipe_clk";
+ #clock-cells = <0>;
+
+ #phy-cells = <0>;
+
+ resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+ reset-names = "phy";
+
+ assigned-clocks = <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+ assigned-clock-rates = <100000000>;
+
+ status = "disabled";
+ };
+
ufs_mem_hc: ufshc@1d84000 {
compatible = "qcom,sm8150-ufshc", "qcom,ufshc",
"jedec,ufs-2.0";
@@ -1633,7 +2016,7 @@
<0 0x01d90000 0 0x8000>;
reg-names = "std", "ice";
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&ufs_mem_phy_lanes>;
+ phys = <&ufs_mem_phy>;
phy-names = "ufsphy";
lanes-per-direction = <2>;
#reset-cells = <1>;
@@ -1678,39 +2061,62 @@
ufs_mem_phy: phy@1d87000 {
compatible = "qcom,sm8150-qmp-ufs-phy";
- reg = <0 0x01d87000 0 0x1c0>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x01d87000 0 0x1000>;
+
clock-names = "ref",
"ref_aux";
clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
<&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+ power-domains = <&gcc UFS_PHY_GDSC>;
+
resets = <&ufs_mem_hc 0>;
reset-names = "ufsphy";
+
+ #phy-cells = <0>;
+
status = "disabled";
+ };
- ufs_mem_phy_lanes: phy@1d87400 {
- reg = <0 0x01d87400 0 0x108>,
- <0 0x01d87600 0 0x1e0>,
- <0 0x01d87c00 0 0x1dc>,
- <0 0x01d87800 0 0x108>,
- <0 0x01d87a00 0 0x1e0>;
- #phy-cells = <0>;
- };
+ cryptobam: dma-controller@1dc4000 {
+ compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+ reg = <0 0x01dc4000 0 0x24000>;
+ interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ num-channels = <8>;
+ qcom,num-ees = <2>;
+ iommus = <&apps_smmu 0x502 0x0641>,
+ <&apps_smmu 0x504 0x0011>,
+ <&apps_smmu 0x506 0x0011>,
+ <&apps_smmu 0x508 0x0011>,
+ <&apps_smmu 0x512 0x0000>;
};
- ipa_virt: interconnect@1e00000 {
- compatible = "qcom,sm8150-ipa-virt";
- reg = <0 0x01e00000 0 0x1000>;
- #interconnect-cells = <1>;
- qcom,bcm-voters = <&apps_bcm_voter>;
+ crypto: crypto@1dfa000 {
+ compatible = "qcom,sm8150-qce", "qcom,qce";
+ reg = <0 0x01dfa000 0 0x6000>;
+ dmas = <&cryptobam 4>, <&cryptobam 5>;
+ dma-names = "rx", "tx";
+ iommus = <&apps_smmu 0x502 0x0641>,
+ <&apps_smmu 0x504 0x0011>,
+ <&apps_smmu 0x506 0x0011>,
+ <&apps_smmu 0x508 0x0011>,
+ <&apps_smmu 0x512 0x0000>;
+ interconnects = <&aggre2_noc MASTER_CRYPTO_CORE_0 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "memory";
};
- tcsr_mutex_regs: syscon@1f40000 {
- compatible = "syscon";
- reg = <0x0 0x01f40000 0x0 0x40000>;
+ tcsr_mutex: hwlock@1f40000 {
+ compatible = "qcom,tcsr-mutex";
+ reg = <0x0 0x01f40000 0x0 0x20000>;
+ #hwlock-cells = <1>;
+ };
+
+ tcsr_regs_1: syscon@1f60000 {
+ compatible = "qcom,sm8150-tcsr", "syscon";
+ reg = <0x0 0x01f60000 0x0 0x20000>;
};
remoteproc_slpi: remoteproc@2400000 {
@@ -1728,8 +2134,8 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd 3>,
- <&rpmhpd 2>;
+ power-domains = <&rpmhpd SM8150_LCX>,
+ <&rpmhpd SM8150_LMX>;
power-domain-names = "lcx", "lmx";
memory-region = <&slpi_mem>;
@@ -1751,6 +2157,7 @@
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "sdsp";
+ qcom,non-secure-domain;
#address-cells = <1>;
#size-cells = <0>;
@@ -1777,16 +2184,7 @@
};
gpu: gpu@2c00000 {
- /*
- * note: the amd,imageon compatible makes it possible
- * to use the drm/msm driver without the display node,
- * make sure to remove it when display node is added
- */
- compatible = "qcom,adreno-640.1",
- "qcom,adreno",
- "amd,imageon";
- #stream-id-cells = <16>;
-
+ compatible = "qcom,adreno-640.1", "qcom,adreno";
reg = <0 0x02c00000 0 0x40000>;
reg-names = "kgsl_3d0_reg_memory";
@@ -1798,50 +2196,58 @@
qcom,gmu = <&gmu>;
+ nvmem-cells = <&gpu_speed_bin>;
+ nvmem-cell-names = "speed_bin";
+
status = "disabled";
zap-shader {
memory-region = <&gpu_mem>;
};
- /* note: downstream checks gpu binning for 675 Mhz */
gpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-675000000 {
opp-hz = /bits/ 64 <675000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+ opp-supported-hw = <0x2>;
};
opp-585000000 {
opp-hz = /bits/ 64 <585000000>;
opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+ opp-supported-hw = <0x3>;
};
opp-499200000 {
opp-hz = /bits/ 64 <499200000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+ opp-supported-hw = <0x3>;
};
opp-427000000 {
opp-hz = /bits/ 64 <427000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+ opp-supported-hw = <0x3>;
};
opp-345000000 {
opp-hz = /bits/ 64 <345000000>;
opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+ opp-supported-hw = <0x3>;
};
opp-257000000 {
opp-hz = /bits/ 64 <257000000>;
opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+ opp-supported-hw = <0x3>;
};
};
};
gmu: gmu@2c6a000 {
- compatible="qcom,adreno-gmu-640.1", "qcom,adreno-gmu";
+ compatible = "qcom,adreno-gmu-640.1", "qcom,adreno-gmu";
reg = <0 0x02c6a000 0 0x30000>,
<0 0x0b290000 0 0x10000>,
@@ -1894,7 +2300,8 @@
};
adreno_smmu: iommu@2ca0000 {
- compatible = "qcom,sm8150-smmu-500", "arm,mmu-500";
+ compatible = "qcom,sm8150-smmu-500", "qcom,adreno-smmu",
+ "qcom,smmu-500", "arm,mmu-500";
reg = <0 0x02ca0000 0 0x10000>;
#iommu-cells = <2>;
#global-interrupts = <1>;
@@ -1928,406 +2335,340 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ wakeup-parent = <&pdc>;
- qup_i2c0_default: qup-i2c0-default {
- mux {
- pins = "gpio0", "gpio1";
- function = "qup0";
- };
-
- config {
- pins = "gpio0", "gpio1";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c0_default: qup-i2c0-default-state {
+ pins = "gpio0", "gpio1";
+ function = "qup0";
+ drive-strength = <0x02>;
+ bias-disable;
};
- qup_spi0_default: qup-spi0-default {
+ qup_spi0_default: qup-spi0-default-state {
pins = "gpio0", "gpio1", "gpio2", "gpio3";
function = "qup0";
drive-strength = <6>;
bias-disable;
};
- qup_i2c1_default: qup-i2c1-default {
- mux {
- pins = "gpio114", "gpio115";
- function = "qup1";
- };
-
- config {
- pins = "gpio114", "gpio115";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c1_default: qup-i2c1-default-state {
+ pins = "gpio114", "gpio115";
+ function = "qup1";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi1_default: qup-spi1-default {
+ qup_spi1_default: qup-spi1-default-state {
pins = "gpio114", "gpio115", "gpio116", "gpio117";
function = "qup1";
drive-strength = <6>;
bias-disable;
};
- qup_i2c2_default: qup-i2c2-default {
- mux {
- pins = "gpio126", "gpio127";
- function = "qup2";
- };
-
- config {
- pins = "gpio126", "gpio127";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c2_default: qup-i2c2-default-state {
+ pins = "gpio126", "gpio127";
+ function = "qup2";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi2_default: qup-spi2-default {
+ qup_spi2_default: qup-spi2-default-state {
pins = "gpio126", "gpio127", "gpio128", "gpio129";
function = "qup2";
drive-strength = <6>;
bias-disable;
};
- qup_i2c3_default: qup-i2c3-default {
- mux {
- pins = "gpio144", "gpio145";
- function = "qup3";
- };
-
- config {
- pins = "gpio144", "gpio145";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c3_default: qup-i2c3-default-state {
+ pins = "gpio144", "gpio145";
+ function = "qup3";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi3_default: qup-spi3-default {
+ qup_spi3_default: qup-spi3-default-state {
pins = "gpio144", "gpio145", "gpio146", "gpio147";
function = "qup3";
drive-strength = <6>;
bias-disable;
};
- qup_i2c4_default: qup-i2c4-default {
- mux {
- pins = "gpio51", "gpio52";
- function = "qup4";
- };
-
- config {
- pins = "gpio51", "gpio52";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c4_default: qup-i2c4-default-state {
+ pins = "gpio51", "gpio52";
+ function = "qup4";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi4_default: qup-spi4-default {
+ qup_spi4_default: qup-spi4-default-state {
pins = "gpio51", "gpio52", "gpio53", "gpio54";
function = "qup4";
drive-strength = <6>;
bias-disable;
};
- qup_i2c5_default: qup-i2c5-default {
- mux {
- pins = "gpio121", "gpio122";
- function = "qup5";
- };
-
- config {
- pins = "gpio121", "gpio122";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c5_default: qup-i2c5-default-state {
+ pins = "gpio121", "gpio122";
+ function = "qup5";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi5_default: qup-spi5-default {
+ qup_spi5_default: qup-spi5-default-state {
pins = "gpio119", "gpio120", "gpio121", "gpio122";
function = "qup5";
drive-strength = <6>;
bias-disable;
};
- qup_i2c6_default: qup-i2c6-default {
- mux {
- pins = "gpio6", "gpio7";
- function = "qup6";
- };
-
- config {
- pins = "gpio6", "gpio7";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c6_default: qup-i2c6-default-state {
+ pins = "gpio6", "gpio7";
+ function = "qup6";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi6_default: qup-spi6_default {
+ qup_spi6_default: qup-spi6_default-state {
pins = "gpio4", "gpio5", "gpio6", "gpio7";
function = "qup6";
drive-strength = <6>;
bias-disable;
};
- qup_i2c7_default: qup-i2c7-default {
- mux {
- pins = "gpio98", "gpio99";
- function = "qup7";
- };
-
- config {
- pins = "gpio98", "gpio99";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c7_default: qup-i2c7-default-state {
+ pins = "gpio98", "gpio99";
+ function = "qup7";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi7_default: qup-spi7_default {
+ qup_spi7_default: qup-spi7_default-state {
pins = "gpio98", "gpio99", "gpio100", "gpio101";
function = "qup7";
drive-strength = <6>;
bias-disable;
};
- qup_i2c8_default: qup-i2c8-default {
- mux {
- pins = "gpio88", "gpio89";
- function = "qup8";
- };
-
- config {
- pins = "gpio88", "gpio89";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c8_default: qup-i2c8-default-state {
+ pins = "gpio88", "gpio89";
+ function = "qup8";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi8_default: qup-spi8-default {
+ qup_spi8_default: qup-spi8-default-state {
pins = "gpio88", "gpio89", "gpio90", "gpio91";
function = "qup8";
drive-strength = <6>;
bias-disable;
};
- qup_i2c9_default: qup-i2c9-default {
- mux {
- pins = "gpio39", "gpio40";
- function = "qup9";
- };
-
- config {
- pins = "gpio39", "gpio40";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c9_default: qup-i2c9-default-state {
+ pins = "gpio39", "gpio40";
+ function = "qup9";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi9_default: qup-spi9-default {
+ qup_spi9_default: qup-spi9-default-state {
pins = "gpio39", "gpio40", "gpio41", "gpio42";
function = "qup9";
drive-strength = <6>;
bias-disable;
};
- qup_i2c10_default: qup-i2c10-default {
- mux {
- pins = "gpio9", "gpio10";
- function = "qup10";
- };
+ qup_uart9_default: qup-uart9-default-state {
+ pins = "gpio41", "gpio42";
+ function = "qup9";
+ drive-strength = <2>;
+ bias-disable;
+ };
- config {
- pins = "gpio9", "gpio10";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c10_default: qup-i2c10-default-state {
+ pins = "gpio9", "gpio10";
+ function = "qup10";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi10_default: qup-spi10-default {
+ qup_spi10_default: qup-spi10-default-state {
pins = "gpio9", "gpio10", "gpio11", "gpio12";
function = "qup10";
drive-strength = <6>;
bias-disable;
};
- qup_i2c11_default: qup-i2c11-default {
- mux {
- pins = "gpio94", "gpio95";
- function = "qup11";
- };
-
- config {
- pins = "gpio94", "gpio95";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c11_default: qup-i2c11-default-state {
+ pins = "gpio94", "gpio95";
+ function = "qup11";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi11_default: qup-spi11-default {
+ qup_spi11_default: qup-spi11-default-state {
pins = "gpio92", "gpio93", "gpio94", "gpio95";
function = "qup11";
drive-strength = <6>;
bias-disable;
};
- qup_i2c12_default: qup-i2c12-default {
- mux {
- pins = "gpio83", "gpio84";
- function = "qup12";
- };
-
- config {
- pins = "gpio83", "gpio84";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c12_default: qup-i2c12-default-state {
+ pins = "gpio83", "gpio84";
+ function = "qup12";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi12_default: qup-spi12-default {
+ qup_spi12_default: qup-spi12-default-state {
pins = "gpio83", "gpio84", "gpio85", "gpio86";
function = "qup12";
drive-strength = <6>;
bias-disable;
};
- qup_i2c13_default: qup-i2c13-default {
- mux {
- pins = "gpio43", "gpio44";
- function = "qup13";
- };
-
- config {
- pins = "gpio43", "gpio44";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c13_default: qup-i2c13-default-state {
+ pins = "gpio43", "gpio44";
+ function = "qup13";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi13_default: qup-spi13-default {
+ qup_spi13_default: qup-spi13-default-state {
pins = "gpio43", "gpio44", "gpio45", "gpio46";
function = "qup13";
drive-strength = <6>;
bias-disable;
};
- qup_i2c14_default: qup-i2c14-default {
- mux {
- pins = "gpio47", "gpio48";
- function = "qup14";
- };
-
- config {
- pins = "gpio47", "gpio48";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c14_default: qup-i2c14-default-state {
+ pins = "gpio47", "gpio48";
+ function = "qup14";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi14_default: qup-spi14-default {
+ qup_spi14_default: qup-spi14-default-state {
pins = "gpio47", "gpio48", "gpio49", "gpio50";
function = "qup14";
drive-strength = <6>;
bias-disable;
};
- qup_i2c15_default: qup-i2c15-default {
- mux {
- pins = "gpio27", "gpio28";
- function = "qup15";
- };
-
- config {
- pins = "gpio27", "gpio28";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c15_default: qup-i2c15-default-state {
+ pins = "gpio27", "gpio28";
+ function = "qup15";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi15_default: qup-spi15-default {
+ qup_spi15_default: qup-spi15-default-state {
pins = "gpio27", "gpio28", "gpio29", "gpio30";
function = "qup15";
drive-strength = <6>;
bias-disable;
};
- qup_i2c16_default: qup-i2c16-default {
- mux {
- pins = "gpio86", "gpio85";
- function = "qup16";
- };
-
- config {
- pins = "gpio86", "gpio85";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c16_default: qup-i2c16-default-state {
+ pins = "gpio86", "gpio85";
+ function = "qup16";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi16_default: qup-spi16-default {
+ qup_spi16_default: qup-spi16-default-state {
pins = "gpio83", "gpio84", "gpio85", "gpio86";
function = "qup16";
drive-strength = <6>;
bias-disable;
};
- qup_i2c17_default: qup-i2c17-default {
- mux {
- pins = "gpio55", "gpio56";
- function = "qup17";
- };
-
- config {
- pins = "gpio55", "gpio56";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c17_default: qup-i2c17-default-state {
+ pins = "gpio55", "gpio56";
+ function = "qup17";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi17_default: qup-spi17-default {
+ qup_spi17_default: qup-spi17-default-state {
pins = "gpio55", "gpio56", "gpio57", "gpio58";
function = "qup17";
drive-strength = <6>;
bias-disable;
};
- qup_i2c18_default: qup-i2c18-default {
- mux {
- pins = "gpio23", "gpio24";
- function = "qup18";
- };
-
- config {
- pins = "gpio23", "gpio24";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c18_default: qup-i2c18-default-state {
+ pins = "gpio23", "gpio24";
+ function = "qup18";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi18_default: qup-spi18-default {
+ qup_spi18_default: qup-spi18-default-state {
pins = "gpio23", "gpio24", "gpio25", "gpio26";
function = "qup18";
drive-strength = <6>;
bias-disable;
};
- qup_i2c19_default: qup-i2c19-default {
- mux {
- pins = "gpio57", "gpio58";
- function = "qup19";
- };
-
- config {
- pins = "gpio57", "gpio58";
- drive-strength = <0x02>;
- bias-disable;
- };
+ qup_i2c19_default: qup-i2c19-default-state {
+ pins = "gpio57", "gpio58";
+ function = "qup19";
+ drive-strength = <2>;
+ bias-disable;
};
- qup_spi19_default: qup-spi19-default {
+ qup_spi19_default: qup-spi19-default-state {
pins = "gpio55", "gpio56", "gpio57", "gpio58";
function = "qup19";
drive-strength = <6>;
bias-disable;
};
+
+ pcie0_default_state: pcie0-default-state {
+ perst-pins {
+ pins = "gpio35";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq-pins {
+ pins = "gpio36";
+ function = "pci_e0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio37";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ pcie1_default_state: pcie1-default-state {
+ perst-pins {
+ pins = "gpio102";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ clkreq-pins {
+ pins = "gpio103";
+ function = "pci_e1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ wake-pins {
+ pins = "gpio104";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
};
remoteproc_mpss: remoteproc@4080000 {
@@ -2346,8 +2687,8 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd 7>,
- <&rpmhpd 0>;
+ power-domains = <&rpmhpd SM8150_CX>,
+ <&rpmhpd SM8150_MSS>;
power-domain-names = "cx", "mss";
memory-region = <&mpss_mem>;
@@ -2608,11 +2949,8 @@
};
in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
- port@1 {
- reg = <1>;
+ port {
replicator1_in: endpoint {
remote-endpoint = <&replicator_out1>;
};
@@ -2973,7 +3311,7 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd 7>;
+ power-domains = <&rpmhpd SM8150_CX>;
memory-region = <&cdsp_mem>;
@@ -2994,63 +3332,56 @@
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "cdsp";
+ qcom,non-secure-domain;
#address-cells = <1>;
#size-cells = <0>;
compute-cb@1 {
compatible = "qcom,fastrpc-compute-cb";
reg = <1>;
- iommus = <&apps_smmu 0x1401 0x2040>,
- <&apps_smmu 0x1421 0x0>,
- <&apps_smmu 0x2001 0x420>,
- <&apps_smmu 0x2041 0x0>;
+ iommus = <&apps_smmu 0x1001 0x0460>;
};
compute-cb@2 {
compatible = "qcom,fastrpc-compute-cb";
reg = <2>;
- iommus = <&apps_smmu 0x2 0x3440>,
- <&apps_smmu 0x22 0x3400>;
+ iommus = <&apps_smmu 0x1002 0x0460>;
};
compute-cb@3 {
compatible = "qcom,fastrpc-compute-cb";
reg = <3>;
- iommus = <&apps_smmu 0x3 0x3440>,
- <&apps_smmu 0x1423 0x0>,
- <&apps_smmu 0x2023 0x0>;
+ iommus = <&apps_smmu 0x1003 0x0460>;
};
compute-cb@4 {
compatible = "qcom,fastrpc-compute-cb";
reg = <4>;
- iommus = <&apps_smmu 0x4 0x3440>,
- <&apps_smmu 0x24 0x3400>;
+ iommus = <&apps_smmu 0x1004 0x0460>;
};
compute-cb@5 {
compatible = "qcom,fastrpc-compute-cb";
reg = <5>;
- iommus = <&apps_smmu 0x5 0x3440>,
- <&apps_smmu 0x25 0x3400>;
+ iommus = <&apps_smmu 0x1005 0x0460>;
};
compute-cb@6 {
compatible = "qcom,fastrpc-compute-cb";
reg = <6>;
- iommus = <&apps_smmu 0x6 0x3460>;
+ iommus = <&apps_smmu 0x1006 0x0460>;
};
compute-cb@7 {
compatible = "qcom,fastrpc-compute-cb";
reg = <7>;
- iommus = <&apps_smmu 0x7 0x3460>;
+ iommus = <&apps_smmu 0x1007 0x0460>;
};
compute-cb@8 {
compatible = "qcom,fastrpc-compute-cb";
reg = <8>;
- iommus = <&apps_smmu 0x8 0x3460>;
+ iommus = <&apps_smmu 0x1008 0x0460>;
};
/* note: secure cb9 in downstream */
@@ -3084,82 +3415,135 @@
resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
};
- usb_1_qmpphy: phy@88e9000 {
- compatible = "qcom,sm8150-qmp-usb3-phy";
- reg = <0 0x088e9000 0 0x18c>,
- <0 0x088e8000 0 0x10>;
- status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ usb_1_qmpphy: phy@88e8000 {
+ compatible = "qcom,sm8150-qmp-usb3-dp-phy";
+ reg = <0 0x088e8000 0 0x3000>;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_PRIM_CLKREF_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
- clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+ <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "usb3_pipe";
resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
<&gcc GCC_USB3_PHY_PRIM_BCR>;
reset-names = "phy", "common";
- usb_1_ssphy: phy@88e9200 {
- reg = <0 0x088e9200 0 0x200>,
- <0 0x088e9400 0 0x200>,
- <0 0x088e9c00 0 0x218>,
- <0 0x088e9600 0 0x200>,
- <0 0x088e9800 0 0x200>,
- <0 0x088e9a00 0 0x100>;
- #clock-cells = <0>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_phy_pipe_clk_src";
+ #clock-cells = <1>;
+ #phy-cells = <1>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_qmpphy_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_qmpphy_usb_ss_in: endpoint {
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ usb_1_qmpphy_dp_in: endpoint {
+ };
+ };
};
};
usb_2_qmpphy: phy@88eb000 {
compatible = "qcom,sm8150-qmp-usb3-uni-phy";
- reg = <0 0x088eb000 0 0x200>;
- status = "disabled";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ reg = <0 0x088eb000 0 0x1000>;
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
- <&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_CLK>,
- <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
- clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+ <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
+ <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+ clock-names = "aux",
+ "ref",
+ "com_aux",
+ "pipe";
+ clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
- resets = <&gcc GCC_USB3PHY_PHY_SEC_BCR>,
- <&gcc GCC_USB3_PHY_SEC_BCR>;
- reset-names = "phy", "common";
+ resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+ <&gcc GCC_USB3PHY_PHY_SEC_BCR>;
+ reset-names = "phy",
+ "phy_phy";
- usb_2_ssphy: phy@88eb200 {
- reg = <0 0x088eb200 0 0x200>,
- <0 0x088eb400 0 0x200>,
- <0 0x088eb800 0 0x800>,
- <0 0x088eb600 0 0x200>;
- #clock-cells = <0>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
- clock-names = "pipe0";
- clock-output-names = "usb3_uni_phy_pipe_clk_src";
+ status = "disabled";
+ };
+
+ sdhc_2: mmc@8804000 {
+ compatible = "qcom,sm8150-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0 0x08804000 0 0x1000>;
+
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "core", "xo";
+ iommus = <&apps_smmu 0x6a0 0x0>;
+ qcom,dll-config = <0x0007642c>;
+ qcom,ddr-config = <0x80040868>;
+ power-domains = <&rpmhpd 0>;
+ operating-points-v2 = <&sdhc2_opp_table>;
+
+ status = "disabled";
+
+ sdhc2_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-202000000 {
+ opp-hz = /bits/ 64 <202000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
};
};
dc_noc: interconnect@9160000 {
compatible = "qcom,sm8150-dc-noc";
reg = <0 0x09160000 0 0x3200>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
gem_noc: interconnect@9680000 {
compatible = "qcom,sm8150-gem-noc";
reg = <0 0x09680000 0 0x3e200>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
@@ -3175,20 +3559,24 @@
clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>,
<&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
- <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+ <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_CLK>;
- clock-names = "cfg_noc", "core", "iface", "mock_utmi",
- "sleep", "xo";
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "xo";
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
@@ -3196,15 +3584,38 @@
resets = <&gcc GCC_USB30_PRIM_BCR>;
- usb_1_dwc3: dwc3@a600000 {
+ interconnects = <&aggre1_noc MASTER_USB3 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
+ usb_1_dwc3: usb@a600000 {
compatible = "snps,dwc3";
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x140 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+ phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_dwc3_hs: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_dwc3_ss: endpoint {
+ };
+ };
+ };
};
};
@@ -3220,20 +3631,24 @@
clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
<&gcc GCC_USB30_SEC_MASTER_CLK>,
<&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
- <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_SEC_SLEEP_CLK>,
+ <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
<&gcc GCC_USB3_SEC_CLKREF_CLK>;
- clock-names = "cfg_noc", "core", "iface", "mock_utmi",
- "sleep", "xo";
+ clock-names = "cfg_noc",
+ "core",
+ "iface",
+ "sleep",
+ "mock_utmi",
+ "xo";
assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_SEC_MASTER_CLK>;
assigned-clock-rates = <19200000>, <200000000>;
- interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 7 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
+ <&pdc 11 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "hs_phy_irq", "ss_phy_irq",
"dm_hs_phy_irq", "dp_hs_phy_irq";
@@ -3241,6 +3656,10 @@
resets = <&gcc GCC_USB30_SEC_BCR>;
+ interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_USB3_1 0>;
+ interconnect-names = "usb-ddr", "apps-usb";
+
usb_2_dwc3: usb@a800000 {
compatible = "snps,dwc3";
reg = <0 0x0a800000 0 0xcd00>;
@@ -3248,7 +3667,7 @@
iommus = <&apps_smmu 0x160 0>;
snps,dis_u2_susphy_quirk;
snps,dis_enblslpm_quirk;
- phys = <&usb_2_hsphy>, <&usb_2_ssphy>;
+ phys = <&usb_2_hsphy>, <&usb_2_qmpphy>;
phy-names = "usb2-phy", "usb3-phy";
};
};
@@ -3256,12 +3675,395 @@
camnoc_virt: interconnect@ac00000 {
compatible = "qcom,sm8150-camnoc-virt";
reg = <0 0x0ac00000 0 0x1000>;
- #interconnect-cells = <1>;
+ #interconnect-cells = <2>;
qcom,bcm-voters = <&apps_bcm_voter>;
};
- aoss_qmp: power-controller@c300000 {
- compatible = "qcom,sm8150-aoss-qmp";
+ mdss: display-subsystem@ae00000 {
+ compatible = "qcom,sm8150-mdss";
+ reg = <0 0x0ae00000 0 0x1000>;
+ reg-names = "mdss";
+
+ interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mc_virt SLAVE_EBI_CH0 0>,
+ <&mmss_noc MASTER_MDP_PORT1 0 &mc_virt SLAVE_EBI_CH0 0>;
+ interconnect-names = "mdp0-mem", "mdp1-mem";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&gcc GCC_DISP_SF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "bus", "nrt_bus", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x800 0x420>;
+
+ status = "disabled";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ mdss_mdp: display-controller@ae01000 {
+ compatible = "qcom,sm8150-dpu";
+ reg = <0 0x0ae01000 0 0x8f000>,
+ <0 0x0aeb0000 0 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "iface", "bus", "core", "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&mdss_dsi1_in>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint = <&mdss_dp_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-171428571 {
+ opp-hz = /bits/ 64 <171428571>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-345000000 {
+ opp-hz = /bits/ 64 <345000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-460000000 {
+ opp-hz = /bits/ 64 <460000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss_dp: displayport-controller@ae90000 {
+ compatible = "qcom,sm8150-dp", "qcom,sm8350-dp";
+ reg = <0 0xae90000 0 0x200>,
+ <0 0xae90200 0 0x200>,
+ <0 0xae90400 0 0x600>,
+ <0 0x0ae90a00 0 0x600>,
+ <0 0x0ae91000 0 0x600>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <12>;
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+ clock-names = "core_iface",
+ "core_aux",
+ "ctrl_link",
+ "ctrl_link_iface",
+ "stream_pixel";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+
+ phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
+ phy-names = "dp";
+
+ #sound-dai-cells = <0>;
+
+ operating-points-v2 = <&dp_opp_table>;
+ power-domains = <&rpmhpd SM8250_MMCX>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dp_in: endpoint {
+ remote-endpoint = <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dp_out: endpoint {
+ };
+ };
+ };
+
+ dp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-160000000 {
+ opp-hz = /bits/ 64 <160000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-270000000 {
+ opp-hz = /bits/ 64 <270000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-540000000 {
+ opp-hz = /bits/ 64 <540000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-810000000 {
+ opp-hz = /bits/ 64 <810000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+ };
+
+ mdss_dsi0: dsi@ae94000 {
+ compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae94000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+
+ phys = <&mdss_dsi0_phy>;
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi0_out: endpoint {
+ };
+ };
+ };
+
+ dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@ae94400 {
+ compatible = "qcom,dsi-phy-7nm-8150";
+ reg = <0 0x0ae94400 0 0x200>,
+ <0 0x0ae94600 0 0x280>,
+ <0 0x0ae94900 0 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+
+ mdss_dsi1: dsi@ae96000 {
+ compatible = "qcom,sm8150-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae96000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmhpd SM8150_MMCX>;
+
+ phys = <&mdss_dsi1_phy>;
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi1_phy: phy@ae96400 {
+ compatible = "qcom,dsi-phy-7nm-8150";
+ reg = <0 0x0ae96400 0 0x200>,
+ <0 0x0ae96600 0 0x280>,
+ <0 0x0ae96900 0 0x260>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sm8150-dispcc";
+ reg = <0 0x0af00000 0 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&mdss_dsi0_phy 0>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+ <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
+ clock-names = "bi_tcxo",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_byteclk",
+ "dsi1_phy_pll_out_dsiclk",
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk";
+ power-domains = <&rpmhpd SM8150_MMCX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,sm8150-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x30000>;
+ qcom,pdc-ranges = <0 480 94>, <94 609 31>,
+ <125 63 1>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ aoss_qmp: power-management@c300000 {
+ compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp";
reg = <0x0 0x0c300000 0x0 0x400>;
interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 0>;
@@ -3312,11 +4114,10 @@
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
- cell-index = <0>;
};
apps_smmu: iommu@15000000 {
- compatible = "qcom,sm8150-smmu-500", "arm,mmu-500";
+ compatible = "qcom,sm8150-smmu-500", "qcom,smmu-500", "arm,mmu-500";
reg = <0 0x15000000 0 0x100000>;
#iommu-cells = <2>;
#global-interrupts = <1>;
@@ -3418,7 +4219,7 @@
clocks = <&rpmhcc RPMH_CXO_CLK>;
clock-names = "xo";
- power-domains = <&rpmhpd 7>;
+ power-domains = <&rpmhpd SM8150_CX>;
memory-region = <&adsp_mem>;
@@ -3439,6 +4240,7 @@
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
label = "adsp";
+ qcom,non-secure-domain;
#address-cells = <1>;
#size-cells = <0>;
@@ -3473,7 +4275,8 @@
};
apss_shared: mailbox@17c00000 {
- compatible = "qcom,sm8150-apss-shared";
+ compatible = "qcom,sm8150-apss-shared",
+ "qcom,sdm845-apss-shared";
reg = <0x0 0x17c00000 0x0 0x1000>;
#mbox-cells = <1>;
};
@@ -3482,64 +4285,64 @@
compatible = "qcom,apss-wdt-sm8150", "qcom,kpss-wdt";
reg = <0 0x17c10000 0 0x1000>;
clocks = <&sleep_clk>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
};
timer@17c20000 {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0x0 0x17c20000 0x0 0x1000>;
clock-frequency = <19200000>;
- frame@17c21000{
+ frame@17c21000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c21000 0x0 0x1000>,
- <0x0 0x17c22000 0x0 0x1000>;
+ reg = <0x17c21000 0x1000>,
+ <0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c23000 0x0 0x1000>;
+ reg = <0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c25000 0x0 0x1000>;
+ reg = <0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c26000 0x0 0x1000>;
+ reg = <0x17c26000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c29000 0x0 0x1000>;
+ reg = <0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2b000 0x0 0x1000>;
+ reg = <0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2d000 0x0 0x1000>;
+ reg = <0x17c2d000 0x1000>;
status = "disabled";
};
};
@@ -3557,9 +4360,10 @@
qcom,tcs-offset = <0xd00>;
qcom,drv-id = <2>;
qcom,tcs-config = <ACTIVE_TCS 2>,
- <SLEEP_TCS 1>,
- <WAKE_TCS 1>,
- <CONTROL_TCS 0>;
+ <SLEEP_TCS 3>,
+ <WAKE_TCS 3>,
+ <CONTROL_TCS 1>;
+ power-domains = <&CLUSTER_PD>;
rpmhcc: clock-controller {
compatible = "qcom,sm8150-rpmh-clk";
@@ -3622,13 +4426,13 @@
};
};
- apps_bcm_voter: bcm_voter {
+ apps_bcm_voter: bcm-voter {
compatible = "qcom,bcm-voter";
};
};
osm_l3: interconnect@18321000 {
- compatible = "qcom,sm8150-osm-l3";
+ compatible = "qcom,sm8150-osm-l3", "qcom,osm-l3";
reg = <0 0x18321000 0 0x1400>;
clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
@@ -3638,7 +4442,7 @@
};
cpufreq_hw: cpufreq@18323000 {
- compatible = "qcom,cpufreq-hw";
+ compatible = "qcom,sm8150-cpufreq-hw", "qcom,cpufreq-hw";
reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>,
<0 0x18327800 0 0x1400>;
reg-names = "freq-domain0", "freq-domain1",
@@ -3648,6 +4452,31 @@
clock-names = "xo", "alternate";
#freq-domain-cells = <1>;
+ #clock-cells = <1>;
+ };
+
+ lmh_cluster1: lmh@18350800 {
+ compatible = "qcom,sm8150-lmh";
+ reg = <0 0x18350800 0 0x400>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ cpus = <&CPU4>;
+ qcom,lmh-temp-arm-millicelsius = <60000>;
+ qcom,lmh-temp-low-millicelsius = <84500>;
+ qcom,lmh-temp-high-millicelsius = <85000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ lmh_cluster0: lmh@18358800 {
+ compatible = "qcom,sm8150-lmh";
+ reg = <0 0x18358800 0 0x400>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ cpus = <&CPU0>;
+ qcom,lmh-temp-arm-millicelsius = <60000>;
+ qcom,lmh-temp-low-millicelsius = <84500>;
+ qcom,lmh-temp-high-millicelsius = <85000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
};
wifi: wifi@18800000 {
@@ -3702,7 +4531,7 @@
type = "passive";
};
- cpu0_crit: cpu_crit {
+ cpu0_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -3746,7 +4575,7 @@
type = "passive";
};
- cpu1_crit: cpu_crit {
+ cpu1_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -3790,7 +4619,7 @@
type = "passive";
};
- cpu2_crit: cpu_crit {
+ cpu2_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -3834,7 +4663,7 @@
type = "passive";
};
- cpu3_crit: cpu_crit {
+ cpu3_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -3878,7 +4707,7 @@
type = "passive";
};
- cpu4_top_crit: cpu_crit {
+ cpu4_top_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -3922,7 +4751,7 @@
type = "passive";
};
- cpu5_top_crit: cpu_crit {
+ cpu5_top_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -3966,7 +4795,7 @@
type = "passive";
};
- cpu6_top_crit: cpu_crit {
+ cpu6_top_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -4010,7 +4839,7 @@
type = "passive";
};
- cpu7_top_crit: cpu_crit {
+ cpu7_top_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -4054,7 +4883,7 @@
type = "passive";
};
- cpu4_bottom_crit: cpu_crit {
+ cpu4_bottom_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -4098,7 +4927,7 @@
type = "passive";
};
- cpu5_bottom_crit: cpu_crit {
+ cpu5_bottom_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -4142,7 +4971,7 @@
type = "passive";
};
- cpu6_bottom_crit: cpu_crit {
+ cpu6_bottom_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -4186,7 +5015,7 @@
type = "passive";
};
- cpu7_bottom_crit: cpu_crit {
+ cpu7_bottom_crit: cpu-crit {
temperature = <110000>;
hysteresis = <1000>;
type = "critical";
@@ -4266,7 +5095,7 @@
};
};
- gpu-thermal-top {
+ gpu-top-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
@@ -4446,7 +5275,7 @@
};
};
- gpu-thermal-bottom {
+ gpu-bottom-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;