diff options
Diffstat (limited to 'dts/src/arm64/qcom/sm8350.dtsi')
| -rw-r--r-- | dts/src/arm64/qcom/sm8350.dtsi | 756 |
1 files changed, 740 insertions, 16 deletions
diff --git a/dts/src/arm64/qcom/sm8350.dtsi b/dts/src/arm64/qcom/sm8350.dtsi index d134280e29..53b39e718f 100644 --- a/dts/src/arm64/qcom/sm8350.dtsi +++ b/dts/src/arm64/qcom/sm8350.dtsi @@ -6,6 +6,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-sm8350.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,sm8350.h> #include <dt-bindings/mailbox/qcom-ipcc.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -583,8 +584,30 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; - clock-names = "bi_tcxo", "sleep_clk"; - clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; + clock-names = "bi_tcxo", + "sleep_clk", + "pcie_0_pipe_clk", + "pcie_1_pipe_clk", + "ufs_card_rx_symbol_0_clk", + "ufs_card_rx_symbol_1_clk", + "ufs_card_tx_symbol_0_clk", + "ufs_phy_rx_symbol_0_clk", + "ufs_phy_rx_symbol_1_clk", + "ufs_phy_tx_symbol_0_clk", + "usb3_phy_wrapper_gcc_usb30_pipe_clk", + "usb3_uni_phy_sec_gcc_usb30_pipe_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&sleep_clk>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; }; ipcc: mailbox@408000 { @@ -596,17 +619,305 @@ #mbox-cells = <2>; }; + qup_opp_table_100mhz: qup-100mhz-opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + + qup_opp_table_120mhz: qup-120mhz-opp-table { + compatible = "operating-points-v2"; + + opp-50000000 { + opp-hz = /bits/ 64 <50000000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-120000000 { + opp-hz = /bits/ 64 <120000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + + qupv3_id_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + iommus = <&apps_smmu 0x5e3 0x0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c14: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_120mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c15: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_120mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c16: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c16_default>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi16: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c17: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c17_default>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi17: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* QUP no. 18 seems to be strictly SPI/UART-only */ + + spi18: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart18: serial@890000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart18_default>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + status = "disabled"; + }; + + i2c19: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c19_default>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi19: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x009c0000 0x0 0x6000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + iommus = <&apps_smmu 0x5a3 0>; #address-cells = <2>; #size-cells = <2>; ranges; status = "disabled"; + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00980000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00984000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart2: serial@98c000 { compatible = "qcom,geni-debug-uart"; reg = <0 0x0098c000 0 0x4000>; @@ -615,6 +926,140 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart3_default_state>; interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* QUP no. 3 seems to be strictly SPI-only */ + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0098c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00994000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00994000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + uart6: serial@998000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -627,23 +1072,167 @@ clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + iommus = <&apps_smmu 0x43 0>; #address-cells = <2>; #size-cells = <2>; ranges; status = "disabled"; + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_120mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c13: i2c@a94000 { compatible = "qcom,geni-i2c"; reg = <0 0x00a94000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_i2c13_default_state>; + pinctrl-0 = <&qup_i2c13_default>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SM8350_CX>; + operating-points-v2 = <&qup_opp_table_100mhz>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; apps_smmu: iommu@15000000 { @@ -910,7 +1499,7 @@ reg = <0 0x0c263000 0 0x1ff>, /* TM */ <0 0x0c222000 0 0x8>; /* SROT */ #qcom,sensors = <15>; - interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; @@ -921,7 +1510,7 @@ reg = <0 0x0c265000 0 0x1ff>, /* TM */ <0 0x0c223000 0 0x8>; /* SROT */ #qcom,sensors = <14>; - interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "uplow", "critical"; #thermal-sensor-cells = <1>; @@ -982,17 +1571,144 @@ }; }; - qup_i2c13_default_state: qup-i2c13-default-state { - mux { - pins = "gpio0", "gpio1"; - function = "qup13"; - }; + qup_uart6_default: qup-uart6-default { + pins = "gpio30", "gpio31"; + function = "qup6"; + drive-strength = <2>; + bias-disable; + }; - config { - pins = "gpio0", "gpio1"; - drive-strength = <2>; - bias-pull-up; - }; + qup_uart18_default: qup-uart18-default { + pins = "gpio58", "gpio59"; + function = "qup18"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c0_default: qup-i2c0-default { + pins = "gpio4", "gpio5"; + function = "qup0"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c1_default: qup-i2c1-default { + pins = "gpio8", "gpio9"; + function = "qup1"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c2_default: qup-i2c2-default { + pins = "gpio12", "gpio13"; + function = "qup2"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c4_default: qup-i2c4-default { + pins = "gpio20", "gpio21"; + function = "qup4"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c5_default: qup-i2c5-default { + pins = "gpio24", "gpio25"; + function = "qup5"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c6_default: qup-i2c6-default { + pins = "gpio28", "gpio29"; + function = "qup6"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c7_default: qup-i2c7-default { + pins = "gpio32", "gpio33"; + function = "qup7"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c8_default: qup-i2c8-default { + pins = "gpio36", "gpio37"; + function = "qup8"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c9_default: qup-i2c9-default { + pins = "gpio40", "gpio41"; + function = "qup9"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c10_default: qup-i2c10-default { + pins = "gpio44", "gpio45"; + function = "qup10"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c11_default: qup-i2c11-default { + pins = "gpio48", "gpio49"; + function = "qup11"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c12_default: qup-i2c12-default { + pins = "gpio52", "gpio53"; + function = "qup12"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c13_default: qup-i2c13-default { + pins = "gpio0", "gpio1"; + function = "qup13"; + drive-strength = <2>; + bias-pull-up; + }; + + qup_i2c14_default: qup-i2c14-default { + pins = "gpio56", "gpio57"; + function = "qup14"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c15_default: qup-i2c15-default { + pins = "gpio60", "gpio61"; + function = "qup15"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c16_default: qup-i2c16-default { + pins = "gpio64", "gpio65"; + function = "qup16"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c17_default: qup-i2c17-default { + pins = "gpio72", "gpio73"; + function = "qup17"; + drive-strength = <2>; + bias-disable; + }; + + qup_i2c19_default: qup-i2c19-default { + pins = "gpio76", "gpio77"; + function = "qup19"; + drive-strength = <2>; + bias-disable; }; }; @@ -1007,6 +1723,8 @@ compatible = "arm,gic-v3"; #interrupt-cells = <3>; interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0 0x20000>; reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; @@ -1514,6 +2232,12 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + system-cache-controller@9200000 { + compatible = "qcom,sm8350-llcc"; + reg = <0 0x09200000 0 0x1d0000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; @@ -2447,7 +3171,7 @@ }; }; - camera-thermal-bottom { + cam-thermal-bottom { polling-delay-passive = <250>; polling-delay = <1000>; |