diff options
Diffstat (limited to 'dts/src/arm64/qcom/sm8650-qrd.dts')
| -rw-r--r-- | dts/src/arm64/qcom/sm8650-qrd.dts | 439 |
1 files changed, 437 insertions, 2 deletions
diff --git a/dts/src/arm64/qcom/sm8650-qrd.dts b/dts/src/arm64/qcom/sm8650-qrd.dts index b9151c2ddf..b07cac2e5b 100644 --- a/dts/src/arm64/qcom/sm8650-qrd.dts +++ b/dts/src/arm64/qcom/sm8650-qrd.dts @@ -77,9 +77,83 @@ reg = <1>; pmic_glink_ss_in: endpoint { - remote-endpoint = <&usb_1_dwc3_ss>; + remote-endpoint = <&redriver_ss_out>; }; }; + + port@2 { + reg = <2>; + + pmic_glink_sbu: endpoint { + remote-endpoint = <&wcd_usbss_sbu_mux>; + }; + }; + }; + }; + }; + + sound { + compatible = "qcom,sm8650-sndcard", "qcom,sm8450-sndcard"; + model = "SM8650-QRD"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS3", + "AMIC4", "MIC BIAS3", + "AMIC5", "MIC BIAS4", + "TX SWR_INPUT0", "ADC1_OUTPUT", + "TX SWR_INPUT1", "ADC2_OUTPUT", + "TX SWR_INPUT2", "ADC3_OUTPUT", + "TX SWR_INPUT3", "ADC4_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd939x 0>, <&swr1 0>, <&lpass_rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd939x 1>, <&swr2 0>, <&lpass_txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; }; }; }; @@ -94,6 +168,41 @@ regulator-always-on; regulator-boot-on; }; + + wcd939x: audio-codec { + compatible = "qcom,wcd9395-codec", "qcom,wcd9390-codec"; + + pinctrl-0 = <&wcd_default>; + pinctrl-names = "default"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_l15b_1p8>; + vdd-rxtx-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l15b_1p8>; + vdd-mic-bias-supply = <&vreg_bob1>; + + #sound-dai-cells = <1>; + + mode-switch; + orientation-switch; + + port { + wcd_codec_headset_in: endpoint { + remote-endpoint = <&wcd_usbss_headset_out>; + }; + }; + }; }; &apps_rsc { @@ -436,6 +545,138 @@ RPMH_REGULATOR_MODE_HPM>; }; }; + + regulators-6 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "m"; + + vdd-l1-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-l4-supply = <&vreg_bob2>; + vdd-l5-supply = <&vreg_s6c_1p8>; + vdd-l6-supply = <&vreg_bob1>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1m_1p1: ldo1 { + regulator-name = "vreg_l1m_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2m_1p056: ldo2 { + regulator-name = "vreg_l2m_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3m_2p8: ldo3 { + regulator-name = "vreg_l3m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4m_2p8: ldo4 { + regulator-name = "vreg_l4m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5m_1p8: ldo5 { + regulator-name = "vreg_l5m_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6m_2p8: ldo6 { + regulator-name = "vreg_l6m_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7m_2p96: ldo7 { + regulator-name = "vreg_l7m_2p96"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + regulators-7 { + compatible = "qcom,pm8010-rpmh-regulators"; + qcom,pmic-id = "n"; + + vdd-l1-l2-supply = <&vreg_s1c_1p2>; + vdd-l3-l4-supply = <&vreg_s6c_1p8>; + vdd-l5-supply = <&vreg_bob2>; + vdd-l6-supply = <&vreg_bob2>; + vdd-l7-supply = <&vreg_bob1>; + + vreg_l1n_1p1: ldo1 { + regulator-name = "vreg_l1n_1p1"; + regulator-min-microvolt = <1104000>; + regulator-max-microvolt = <1104000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2n_1p056: ldo2 { + regulator-name = "vreg_l2n_1p056"; + regulator-min-microvolt = <1056000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3n_1p8: ldo3 { + regulator-name = "vreg_l3n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4n_1p8: ldo4 { + regulator-name = "vreg_l4n_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5n_2p8: ldo5 { + regulator-name = "vreg_l5n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6n_2p8: ldo6 { + regulator-name = "vreg_l6n_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7n_3p3: ldo7 { + regulator-name = "vreg_l7n_3p3"; + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; }; &dispcc { @@ -446,6 +687,78 @@ status = "okay"; }; +&i2c3 { + status = "okay"; + + wcd_usbss: typec-mux@e { + compatible = "qcom,wcd9395-usbss", "qcom,wcd9390-usbss"; + reg = <0xe>; + + vdd-supply = <&vreg_l15b_1p8>; + reset-gpios = <&tlmm 152 GPIO_ACTIVE_HIGH>; + + mode-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + wcd_usbss_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_sbu>; + }; + }; + + port@1 { + reg = <1>; + + wcd_usbss_headset_out: endpoint { + remote-endpoint = <&wcd_codec_headset_in>; + }; + }; + }; + }; +}; + +&i2c6 { + status = "okay"; + + typec-mux@1c { + compatible = "onnn,nb7vpq904m"; + reg = <0x1c>; + + vcc-supply = <&vreg_l15b_1p8>; + + retimer-switch; + orientation-switch; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + redriver_ss_out: endpoint { + remote-endpoint = <&pmic_glink_ss_in>; + }; + }; + + port@1 { + reg = <1>; + + redriver_ss_in: endpoint { + data-lanes = <3 2 1 0>; + remote-endpoint = <&usb_dp_qmpphy_out>; + }; + }; + }; + }; +}; + &ipa { qcom,gsi-loader = "self"; memory-region = <&ipa_fw_mem>; @@ -453,6 +766,16 @@ status = "okay"; }; +&lpass_tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio21"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; +}; + &mdss { status = "okay"; }; @@ -495,6 +818,15 @@ status = "okay"; }; +&mdss_dp0 { + status = "okay"; +}; + +&mdss_dp0_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_dp_qmpphy_dp_in>; +}; + &mdss_mdp { status = "okay"; }; @@ -600,6 +932,11 @@ status = "okay"; }; +&qup_i2c3_data_clk { + /* Use internal I2C pull-up */ + bias-pull-up = <2200>; +}; + &qupv3_id_0 { status = "okay"; }; @@ -657,6 +994,74 @@ }; }; +&swr0 { + status = "okay"; + + /* WSA8845, Speaker Left */ + left_spkr: speaker@0,0 { + compatible = "sdw20217020400"; + reg = <0 0>; + pinctrl-0 = <&spkr_1_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&lpass_tlmm 21 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3c_1p2>; + }; + + /* WSA8845, Speaker Right */ + right_spkr: speaker@0,1 { + compatible = "sdw20217020400"; + reg = <0 1>; + pinctrl-0 = <&spkr_2_sd_n_active>; + pinctrl-names = "default"; + powerdown-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + vdd-1p8-supply = <&vreg_l15b_1p8>; + vdd-io-supply = <&vreg_l3c_1p2>; + }; +}; + +&swr1 { + status = "okay"; + + /* WCD9395 RX */ + wcd_rx: codec@0,4 { + compatible = "sdw20217010e00"; + reg = <0 4>; + + /* + * WCD9395 RX Port 1 (HPH_L/R) <=> SWR1 Port 1 (HPH_L/R) + * WCD9395 RX Port 2 (CLSH) <=> SWR1 Port 2 (CLSH) + * WCD9395 RX Port 3 (COMP_L/R) <=> SWR1 Port 3 (COMP_L/R) + * WCD9395 RX Port 4 (LO) <=> SWR1 Port 4 (LO) + * WCD9395 RX Port 5 (DSD_L/R) <=> SWR1 Port 5 (DSD_L/R) + * WCD9395 RX Port 6 (HIFI_PCM_L/R) <=> SWR1 Port 9 (HIFI_PCM_L/R) + */ + qcom,rx-port-mapping = <1 2 3 4 5 9>; + }; +}; + +&swr2 { + status = "okay"; + + /* WCD9395 TX */ + wcd_tx: codec@0,3 { + compatible = "sdw20217010e00"; + reg = <0 3>; + + /* + * WCD9395 TX Port 1 (ADC1,2,3,4) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 2 (ADC3,4 & DMIC0,1) <=> SWR2 Port 2 (TX SWR_INPUT 0,1,2,3) + * WCD9395 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3 (TX SWR_INPUT 4,5,6,7) + * WCD9395 TX Port 4 (DMIC4,5,6,7) <=> SWR2 Port 4 (TX SWR_INPUT 8,9,10,11) + */ + qcom,tx-port-mapping = <2 2 3 4>; + }; +}; + &tlmm { /* Reserved I/Os for NFC */ gpio-reserved-ranges = <32 8>, <74 1>; @@ -704,6 +1109,14 @@ bias-pull-down; }; + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio77"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + ts_irq: ts-irq-state { pins = "gpio161"; function = "gpio"; @@ -718,6 +1131,14 @@ drive-strength = <8>; bias-pull-up; }; + + wcd_default: wcd-reset-n-active-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; }; &uart14 { @@ -787,7 +1208,7 @@ }; &usb_1_dwc3_ss { - remote-endpoint = <&pmic_glink_ss_in>; + remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>; }; &usb_1_hsphy { @@ -803,9 +1224,23 @@ vdda-phy-supply = <&vreg_l3i_1p2>; vdda-pll-supply = <&vreg_l3g_0p91>; + orientation-switch; + status = "okay"; }; +&usb_dp_qmpphy_dp_in { + remote-endpoint = <&mdss_dp0_out>; +}; + +&usb_dp_qmpphy_out { + remote-endpoint = <&redriver_ss_in>; +}; + +&usb_dp_qmpphy_usb_ss_in { + remote-endpoint = <&usb_1_dwc3_ss>; +}; + &xo_board { clock-frequency = <76800000>; }; |