diff options
Diffstat (limited to 'dts/src/arm64/renesas/r8a7795-salvator-xs.dts')
| -rw-r--r-- | dts/src/arm64/renesas/r8a7795-salvator-xs.dts | 85 |
1 files changed, 85 insertions, 0 deletions
diff --git a/dts/src/arm64/renesas/r8a7795-salvator-xs.dts b/dts/src/arm64/renesas/r8a7795-salvator-xs.dts index 8b50ceb746..e231b5a7cb 100644 --- a/dts/src/arm64/renesas/r8a7795-salvator-xs.dts +++ b/dts/src/arm64/renesas/r8a7795-salvator-xs.dts @@ -56,6 +56,22 @@ status = "okay"; }; +&ehci3 { + dr_mode = "otg"; + status = "okay"; +}; + +&hsusb3 { + dr_mode = "otg"; + status = "okay"; +}; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2>; /* HDMI1 */ +}; + &hdmi0 { status = "okay"; @@ -66,6 +82,12 @@ remote-endpoint = <&hdmi0_con>; }; }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint1>; + }; + }; }; }; @@ -83,6 +105,12 @@ remote-endpoint = <&hdmi1_con>; }; }; + port@2 { + reg = <2>; + dw_hdmi1_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint2>; + }; + }; }; }; @@ -94,11 +122,61 @@ status = "okay"; }; +&ohci3 { + dr_mode = "otg"; + status = "okay"; +}; + +&rcar_sound { + ports { + /* rsnd_port0 is on salvator-common */ + rsnd_port1: port@1 { + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint1>; + frame-master = <&rsnd_endpoint1>; + + playback = <&ssi2>; + }; + }; + rsnd_port2: port@2 { + rsnd_endpoint2: endpoint { + remote-endpoint = <&dw_hdmi1_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint2>; + frame-master = <&rsnd_endpoint2>; + + playback = <&ssi3>; + }; + }; + }; +}; + &pfc { usb2_pins: usb2 { groups = "usb2"; function = "usb2"; }; + + /* + * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins + * (when SW31 is the default setting on Salvator-XS). + * - If SW31 is the default setting, you cannot use USB2.0 ch3 on + * r8a7795 with Salvator-XS. + * Hence the SW31 setting must be changed like 2) below. + * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF: + * - Connect GP6_3[01] to ADV7842. + * 2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON: + * - Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power). + * - Connect GP6_{04,21} to ADV7842. + */ + usb2_ch3_pins: usb2_ch3 { + groups = "usb2_ch3"; + function = "usb2_ch3"; + }; }; &usb2_phy2 { @@ -107,3 +185,10 @@ status = "okay"; }; + +&usb2_phy3 { + pinctrl-0 = <&usb2_ch3_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; |