diff options
Diffstat (limited to 'dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi')
| -rw-r--r-- | dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi | 217 |
1 files changed, 209 insertions, 8 deletions
diff --git a/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi b/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi index 5d7a9d96d1..5846a11f0e 100644 --- a/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi +++ b/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi @@ -8,6 +8,8 @@ #include "rk3399-gru.dtsi" /{ + chassis-type = "tablet"; + /* Power tree */ /* ppvar_sys children, sorted by name */ @@ -165,7 +167,6 @@ pinctrl-names = "default"; pinctrl-0 = <&bl_en>; pwms = <&pwm1 0 1000000 0>; - pwm-delay-us = <10000>; }; dmic: dmic { @@ -181,7 +182,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pen_eject_odl>; - pen-insert { + switch-pen-insert { label = "Pen Insert"; /* Insert = low, eject = high */ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; @@ -374,7 +375,8 @@ camera: &i2c7 { <&cru ACLK_VIO>, <&cru ACLK_GIC_PRE>, <&cru PCLK_DDR>, - <&cru ACLK_HDCP>; + <&cru ACLK_HDCP>, + <&cru ACLK_VDU>; assigned-clock-rates = <600000000>, <1600000000>, <1000000000>, @@ -386,9 +388,202 @@ camera: &i2c7 { <400000000>, <200000000>, <200000000>, + <400000000>, <400000000>; }; +/* The center supply is fixed to .9V on scarlet */ +&dmc { + center-supply = <&pp900_s0>; +}; + +/* We don't need .925 V for 928 MHz on scarlet */ +&dmc_opp_table { + opp03 { + opp-microvolt = <900000>; + }; +}; + +&gpio0 { + gpio-line-names = /* GPIO0 A 0-7 */ + "CLK_32K_AP", + "EC_IN_RW_OD", + "SPK_PA_EN", + "WLAN_PERST_1V8_L", + "WLAN_PD_1V8_L", + "WLAN_RF_KILL_1V8_L", + "BIGCPU_DVS_PWM", + "SD_CD_L_JTAG_EN", + + /* GPIO0 B 0-5 */ + "BT_EN_BT_RF_KILL_1V8_L", + "PMUIO2_33_18_L_PP3300_S0_EN", + "TOUCH_RESET_L", + "AP_EC_WARM_RESET_REQ", + "PEN_RESET_L", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics call + * it AP_FLASH_WP_R_ODL. + */ + "AP_FLASH_WP_L"; +}; + +&gpio1 { + gpio-line-names = /* GPIO1 A 0-7 */ + "PEN_INT_ODL", + "PEN_EJECT_ODL", + "BT_HOST_WAKE_1V8_L", + "WLAN_HOST_WAKE_1V8_L", + "TOUCH_INT_ODL", + "AP_EC_S3_S0_L", + "AP_EC_OVERTEMP", + "AP_SPI_FLASH_MISO", + + /* GPIO1 B 0-7 */ + "AP_SPI_FLASH_MOSI_R", + "AP_SPI_FLASH_CLK_R", + "AP_SPI_FLASH_CS_L_R", + "SD_CARD_DET_ODL", + "", + "AP_EXPANSION_IO1", + "AP_EXPANSION_IO2", + "AP_I2C_DISP_SDA", + + /* GPIO1 C 0-7 */ + "AP_I2C_DISP_SCL", + "H1_INT_ODL", + "EC_AP_INT_ODL", + "LITCPU_DVS_PWM", + "AP_I2C_AUDIO_SDA", + "AP_I2C_AUDIO_SCL", + "AP_EXPANSION_IO3", + "HEADSET_INT_ODL", + + /* GPIO1 D0 */ + "AP_EXPANSION_IO4"; +}; + +&gpio2 { + gpio-line-names = /* GPIO2 A 0-7 */ + "AP_I2C_PEN_SDA", + "AP_I2C_PEN_SCL", + "SD_IO_PWR_EN", + "UCAM_RST_L", + "PP1250_CAM_EN", + "WCAM_RST_L", + "AP_EXPANSION_IO5", + "AP_I2C_CAM_SDA", + + /* GPIO2 B 0-7 */ + "AP_I2C_CAM_SCL", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + + /* GPIO2 C 0-7 */ + "UART_EXPANSION_TX_AP_RX", + "UART_AP_TX_EXPANSION_RX", + "UART_EXPANSION_RTS_AP_CTS", + "UART_AP_RTS_EXPANSION_CTS", + "AP_SPI_EC_MISO", + "AP_SPI_EC_MOSI", + "AP_SPI_EC_CLK", + "AP_SPI_EC_CS_L", + + /* GPIO2 D 0-4 */ + "PP2800_CAM_EN", + "CLK_24M_CAM", + "WLAN_PCIE_CLKREQ_1V8_L", + "", + "SD_PWR_3000_1800_L"; +}; + +&gpio3 { + gpio-line-names = /* GPIO3 A 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO3 B 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO3 C 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO3 D 0-7 */ + "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI_0", + "STRAP_LCDBIAS_L", + "STRAP_FEATURE_1", + "STRAP_FEATURE_2", + "I2S0_SDO_0"; +}; + +&gpio4 { + gpio-line-names = /* GPIO4 A 0-7 */ + "I2S_MCLK", + "AP_I2C_EXPANSION_SDA", + "AP_I2C_EXPANSION_SCL", + "DMIC_EN", + "", + "", + "", + "", + + /* GPIO4 B 0-7 */ + "", + "", + "", + "", + "", + "", + "", + "", + + /* GPIO4 C 0-7 */ + "AP_I2C_TS_SDA", + "AP_I2C_TS_SCL", + "GPU_DVS_PWM", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "BL_EN", + "BL_PWM", + "", + + /* GPIO4 D 0-5 */ + "", + "DISPLAY_RST_L", + "", + "PPVARP_LCD_EN", + "PPVARN_LCD_EN", + "SD_SLOT_PWR_EN"; +}; + &i2c_tunnel { google,remote-bus = <0>; }; @@ -511,7 +706,7 @@ camera: &i2c7 { &spi2 { status = "okay"; - cr50@0 { + tpm@0 { compatible = "google,cr50"; reg = <0>; interrupt-parent = <&gpio1>; @@ -538,10 +733,6 @@ camera: &i2c7 { }; /* PINCTRL OVERRIDES */ -&ec_ap_int_l { - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; -}; - &ap_fw_wp { rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; @@ -572,6 +763,16 @@ camera: &i2c7 { <4 RK_PA0 1 &pcfg_pull_none_6ma>; }; +&i2s0_8ch_bus_bclk_off { + rockchip,pins = + <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none_6ma>, + <3 RK_PD1 1 &pcfg_pull_none_6ma>, + <3 RK_PD2 1 &pcfg_pull_none_6ma>, + <3 RK_PD3 1 &pcfg_pull_none_6ma>, + <3 RK_PD7 1 &pcfg_pull_none_6ma>, + <4 RK_PA0 1 &pcfg_pull_none_6ma>; +}; + /* there is no external pull up, so need to set this pin pull up */ &sdmmc_cd_pin { rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; |