diff options
Diffstat (limited to 'dts/src/arm64/rockchip/rk3566-pinenote.dtsi')
| -rw-r--r-- | dts/src/arm64/rockchip/rk3566-pinenote.dtsi | 80 |
1 files changed, 80 insertions, 0 deletions
diff --git a/dts/src/arm64/rockchip/rk3566-pinenote.dtsi b/dts/src/arm64/rockchip/rk3566-pinenote.dtsi index fea748adfa..e01668e6e5 100644 --- a/dts/src/arm64/rockchip/rk3566-pinenote.dtsi +++ b/dts/src/arm64/rockchip/rk3566-pinenote.dtsi @@ -466,6 +466,55 @@ default-brightness = <0>; }; }; + + wusb3801: tcpc@60 { + compatible = "willsemi,wusb3801"; + reg = <0x60>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&tcpc_int_l>; + pinctrl-names = "default"; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + vbus-supply = <&otg_switch>; + power-role = "dual"; + try-power-role = "sink"; + data-role = "dual"; + typec-power-opmode = "default"; + pd-disable; + + ports { + #address-cells = <0x1>; + #size-cells = <0x0>; + + port@0 { + reg = <0x0>; + + typec_hs_usb2phy0: endpoint { + remote-endpoint = <&usb2phy0_typec_hs>; + }; + }; + }; + }; + }; +}; + +&i2c5 { + status = "okay"; + + accelerometer@18 { + compatible = "silan,sc7a20"; + reg = <0x18>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&accelerometer_int_l>; + pinctrl-names = "default"; + st,drdy-int-pin = <1>; + vdd-supply = <&vcc_3v3>; + vddio-supply = <&vcc_3v3>; + }; }; &i2s1_8ch { @@ -482,6 +531,12 @@ }; &pinctrl { + accelerometer { + accelerometer_int_l: accelerometer-int-l { + rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + audio-amplifier { spk_amp_enable_h: spk-amp-enable-h { rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; @@ -550,6 +605,12 @@ }; }; + tcpc { + tcpc_int_l: tcpc-int-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + vcc-wl { vcc_wl_pin: vcc-wl-pin { rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; @@ -637,3 +698,22 @@ &uart2 { status = "okay"; }; + +&usb_host0_xhci { + dr_mode = "otg"; + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_otg { + status = "okay"; + + port { + usb2phy0_typec_hs: endpoint { + remote-endpoint = <&typec_hs_usb2phy0>; + }; + }; +}; |