diff options
Diffstat (limited to 'dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts')
| -rw-r--r-- | dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts | 142 |
1 files changed, 137 insertions, 5 deletions
diff --git a/dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts b/dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts index a01886b467..40cf2236c0 100644 --- a/dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts +++ b/dts/src/arm64/rockchip/rk3568-bpi-r2-pro.dts @@ -16,6 +16,7 @@ aliases { ethernet0 = &gmac0; + ethernet1 = &gmac1; mmc0 = &sdmmc0; mmc1 = &sdhci; }; @@ -72,13 +73,61 @@ regulator-max-microvolt = <5000000>; vin-supply = <&dc_12v>; }; + + vcc5v0_usb: vcc5v0_usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_usb_host: vcc5v0-usb-host { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_host_en>; + regulator-name = "vcc5v0_usb_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb_otg: vcc5v0-usb-otg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_usb_otg_en>; + regulator-name = "vcc5v0_usb_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc5v0_usb>; + }; +}; + +&combphy0 { + /* used for USB3 */ + status = "okay"; +}; + +&combphy1 { + /* used for USB3 */ + status = "okay"; +}; + +&combphy2 { + /* used for SATA */ + status = "okay"; }; &gmac0 { assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>; assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>; clock_in_out = "input"; - phy-handle = <&rgmii_phy0>; phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&gmac0_miim @@ -90,8 +139,38 @@ snps,reset-active-low; /* Reset time is 20ms, 100ms for rtl8211f */ snps,reset-delays-us = <0 20000 100000>; + tx_delay = <0x4f>; + rx_delay = <0x0f>; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>; + clock_in_out = "output"; + phy-handle = <&rgmii_phy1>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m1_miim + &gmac1m1_tx_bus2 + &gmac1m1_rx_bus2 + &gmac1m1_rgmii_clk + &gmac1m1_rgmii_bus>; + + snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f */ + snps,reset-delays-us = <0 20000 100000>; + tx_delay = <0x3c>; rx_delay = <0x2f>; + status = "okay"; }; @@ -315,8 +394,8 @@ status = "disabled"; }; -&mdio0 { - rgmii_phy0: ethernet-phy@0 { +&mdio1 { + rgmii_phy1: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <0x0>; }; @@ -338,6 +417,16 @@ <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; + + usb { + vcc5v0_usb_host_en: vcc5v0_usb_host_en { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + vcc5v0_usb_otg_en: vcc5v0_usb_otg_en { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pmu_io_domains { @@ -345,9 +434,9 @@ pmuio2-supply = <&vcc3v3_pmu>; vccio1-supply = <&vccio_acodec>; vccio3-supply = <&vccio_sd>; - vccio4-supply = <&vcc_1v8>; + vccio4-supply = <&vcc_3v3>; vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; vccio7-supply = <&vcc_3v3>; status = "okay"; }; @@ -400,6 +489,10 @@ status = "okay"; }; +&sata2 { + status = "okay"; +}; + &sdhci { bus-width = <8>; max-frequency = <200000000>; @@ -455,3 +548,42 @@ pinctrl-0 = <&uart9m1_xfer>; status = "disabled"; }; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_xhci { + extcon = <&usb2phy0>; + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_xhci { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_usb_host>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_usb_otg>; + status = "okay"; +}; |