diff options
Diffstat (limited to 'dts/src/arm64/rockchip/rk3568-rock-3a.dts')
| -rw-r--r-- | dts/src/arm64/rockchip/rk3568-rock-3a.dts | 327 |
1 files changed, 312 insertions, 15 deletions
diff --git a/dts/src/arm64/rockchip/rk3568-rock-3a.dts b/dts/src/arm64/rockchip/rk3568-rock-3a.dts index 0813c0c5ab..a5e974ea65 100644 --- a/dts/src/arm64/rockchip/rk3568-rock-3a.dts +++ b/dts/src/arm64/rockchip/rk3568-rock-3a.dts @@ -4,6 +4,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/leds/common.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include "rk3568.dtsi" / { @@ -12,14 +13,33 @@ aliases { ethernet0 = &gmac1; - mmc0 = &sdmmc0; - mmc1 = &sdhci; + mmc0 = &sdhci; + mmc1 = &sdmmc0; + mmc2 = &sdmmc2; }; chosen: chosen { stdout-path = "serial2:1500000n8"; }; + hdmi-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + gmac1_clkin: external-gmac1-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac1_clkin"; + #clock-cells = <0>; + }; + leds { compatible = "gpio-leds"; @@ -48,14 +68,68 @@ }; }; - vcc12v_dcin: vcc12v-dcin { + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable>; + post-power-on-delay-ms = <100>; + power-off-delay-us = <5000000>; + reset-gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>; + }; + + vcc12v_dcin: vcc12v-dcin-regulator { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; regulator-always-on; regulator-boot-on; }; - vcc3v3_sys: vcc3v3-sys { + pcie30_avdd0v9: pcie30-avdd0v9-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + + pcie30_avdd1v8: pcie30-avdd1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "pcie30_avdd1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc3v3_sys>; + }; + + /* pi6c pcie clock generator */ + vcc3v3_pi6c_03: vcc3v3-pi6c-03-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pi6c_03"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_enable_h>; + regulator-name = "vcc3v3_pcie"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc3v3_sys"; regulator-always-on; @@ -65,7 +139,7 @@ vin-supply = <&vcc12v_dcin>; }; - vcc5v0_sys: vcc5v0-sys { + vcc5v0_sys: vcc5v0-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; regulator-always-on; @@ -75,7 +149,7 @@ vin-supply = <&vcc12v_dcin>; }; - vcc5v0_usb: vcc5v0-usb { + vcc5v0_usb: vcc5v0-usb-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_usb"; regulator-always-on; @@ -85,7 +159,7 @@ vin-supply = <&vcc12v_dcin>; }; - vcc5v0_usb_host: vcc5v0-usb-host { + vcc5v0_usb_host: vcc5v0-usb-host-regulator { compatible = "regulator-fixed"; enable-active-high; gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; @@ -119,6 +193,38 @@ regulator-max-microvolt = <5000000>; vin-supply = <&vcc5v0_usb>; }; + + vcc_cam: vcc-cam-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_cam_en>; + regulator-name = "vcc_cam"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_mipi: vcc-mipi-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_mipi_en>; + regulator-name = "vcc_mipi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc3v3_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; }; &combphy0 { @@ -129,6 +235,10 @@ status = "okay"; }; +&combphy2 { + status = "okay"; +}; + &cpu0 { cpu-supply = <&vdd_cpu>; }; @@ -147,16 +257,17 @@ &gmac1 { assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>; - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>; - assigned-clock-rates = <0>, <125000000>; - clock_in_out = "output"; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>; + clock_in_out = "input"; phy-handle = <&rgmii_phy1>; phy-mode = "rgmii-id"; + phy-supply = <&vcc_3v3>; pinctrl-names = "default"; pinctrl-0 = <&gmac1m1_miim &gmac1m1_tx_bus2 &gmac1m1_rx_bus2 &gmac1m1_rgmii_clk + &gmac1m1_clkinout &gmac1m1_rgmii_bus>; status = "okay"; }; @@ -166,6 +277,30 @@ status = "okay"; }; +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmitx_scl &hdmitx_sda &hdmitxm1_cec>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -216,7 +351,6 @@ regulator-name = "vdd_logic"; regulator-always-on; regulator-boot-on; - regulator-init-microvolt = <900000>; regulator-initial-mode = <0x2>; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; @@ -230,7 +364,6 @@ vdd_gpu: DCDC_REG2 { regulator-name = "vdd_gpu"; regulator-always-on; - regulator-init-microvolt = <900000>; regulator-initial-mode = <0x2>; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; @@ -254,7 +387,6 @@ vdd_npu: DCDC_REG4 { regulator-name = "vdd_npu"; - regulator-init-microvolt = <900000>; regulator-initial-mode = <0x2>; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1350000>; @@ -406,7 +538,46 @@ }; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3m1_xfer>; + status = "disabled"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4m1_xfer>; + status = "disabled"; +}; + +&i2c5 { + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-output-names = "rtcic_32kout"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + wakeup-source; + }; +}; + +&i2s0_8ch { + status = "okay"; +}; + &i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + +&i2s2_2ch { rockchip,trcm-sync-tx-only; status = "okay"; }; @@ -423,19 +594,68 @@ }; }; +&pcie2x1 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie_reset_h>; + reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pcie30phy { + phy-supply = <&vcc3v3_pi6c_03>; + status = "okay"; +}; + +&pcie3x2 { + pinctrl-names = "default"; + pinctrl-0 = <&pcie30x2m1_pins>; + reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + &pinctrl { + cam { + vcc_cam_en: vcc_cam_en { + rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + display { + vcc_mipi_en: vcc_mipi_en { + rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + ethernet { eth_phy_rst: eth_phy_rst { rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + leds { led_user_en: led_user_en { rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + pcie { + pcie_enable_h: pcie-enable-h { + rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pcie_reset_h: pcie-reset-h { + rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pmic { pmic_int: pmic_int { rockchip,pins = @@ -454,6 +674,26 @@ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + bt { + bt_enable: bt-enable { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake: bt-host-wake { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake: bt-wake { + rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable: wifi-enable { + rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pmu_io_domains { @@ -492,18 +732,58 @@ disable-wp; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; - sd-uhs-sdr104; + sd-uhs-sdr50; vmmc-supply = <&vcc3v3_sd>; vqmmc-supply = <&vccio_sd>; status = "okay"; }; +&sdmmc2 { + bus-width = <4>; + disable-wp; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + &tsadc { rockchip,hw-tshut-mode = <1>; rockchip,hw-tshut-polarity = <0>; status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk809 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake &bt_wake &bt_enable>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + /* vddio comes from regulator on module, use IO bank voltage instead */ + }; +}; + &uart2 { status = "okay"; }; @@ -543,7 +823,7 @@ }; &usb2phy0_otg { - vbus-supply = <&vcc5v0_usb_otg>; + phy-supply = <&vcc5v0_usb_otg>; status = "okay"; }; @@ -560,3 +840,20 @@ phy-supply = <&vcc5v0_usb_host>; status = "okay"; }; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +}; |