1 files changed, 49 insertions, 6 deletions
diff --git a/dts/src/arm64/socionext/uniphier-pxs3.dtsi b/dts/src/arm64/socionext/uniphier-pxs3.dtsi
index 73e7e1203b..616835b381 100644
--- a/dts/src/arm64/socionext/uniphier-pxs3.dtsi
+++ b/dts/src/arm64/socionext/uniphier-pxs3.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/gpio/uniphier-gpio.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "socionext,uniphier-pxs3";
@@ -42,6 +43,7 @@
 			clocks = <&sys_clk 33>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -51,6 +53,7 @@
 			clocks = <&sys_clk 33>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -60,6 +63,7 @@
 			clocks = <&sys_clk 33>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -69,6 +73,7 @@
 			clocks = <&sys_clk 33>;
 			enable-method = "psci";
 			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
 		};
 	};
 
@@ -136,6 +141,37 @@
 			     <1 10 4>;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;	/* 250ms */
+			polling-delay = <1000>;		/* 1000ms */
+			thermal-sensors = <&pvtctl>;
+
+			trips {
+				cpu_crit: cpu-crit {
+					temperature = <110000>;	/* 110C */
+					hysteresis = <2000>;
+					type = "critical";
+				};
+				cpu_alert: cpu-alert {
+					temperature = <100000>;	/* 100C */
+					hysteresis = <2000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -171,8 +207,8 @@
 			interrupts = <0 216 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
-			clocks = <&peri_clk 11>;
-			resets = <&peri_rst 11>;
+			clocks = <&peri_clk 12>;
+			resets = <&peri_rst 12>;
 		};
 
 		serial0: serial@54006800 {
@@ -353,7 +389,7 @@
 			};
 		};
 
-		emmc: sdhc@5a000000 {
+		emmc: mmc@5a000000 {
 			compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
 			reg = <0x5a000000 0x400>;
 			interrupts = <0 78 4>;
@@ -372,7 +408,7 @@
 			cdns,phy-dll-delay-sdclk-hsmmc = <21>;
 		};
 
-		sd: sdhc@5a400000 {
+		sd: mmc@5a400000 {
 			compatible = "socionext,uniphier-sd-v3.1.1";
 			status = "disabled";
 			reg = <0x5a400000 0x800>;
@@ -462,7 +498,7 @@
 			};
 		};
 
-		aidet: aidet@5fc20000 {
+		aidet: interrupt-controller@5fc20000 {
 			compatible = "socionext,uniphier-pxs3-aidet";
 			reg = <0x5fc20000 0x200>;
 			interrupt-controller;
@@ -496,6 +532,13 @@
 			watchdog {
 				compatible = "socionext,uniphier-wdt";
 			};
+
+			pvtctl: pvtctl {
+				compatible = "socionext,uniphier-pxs3-thermal";
+				interrupts = <0 3 4>;
+				#thermal-sensor-cells = <0>;
+				socionext,tmod-calibration = <0x0f22 0x68ee>;
+			};
 		};
 
 		eth0: ethernet@65000000 {
@@ -783,7 +826,7 @@
 			socionext,syscon = <&soc_glue>;
 		};
 
-		nand: nand@68000000 {
+		nand: nand-controller@68000000 {
 			compatible = "socionext,uniphier-denali-nand-v5b";
 			status = "disabled";
 			reg-names = "nand_data", "denali_reg";