diff options
Diffstat (limited to 'dts/src/arm64/ti/k3-j721e-common-proc-board.dts')
| -rw-r--r-- | dts/src/arm64/ti/k3-j721e-common-proc-board.dts | 494 |
1 files changed, 349 insertions, 145 deletions
diff --git a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts index 8bd02d9e28..fe5207ac7d 100644 --- a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts +++ b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts @@ -1,6 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/ + * + * Product Link: https://www.ti.com/tool/J721EXCPXEVM */ /dts-v1/; @@ -12,24 +14,38 @@ #include <dt-bindings/phy/phy-cadence.h> / { + compatible = "ti,j721e-evm", "ti,j721e"; + model = "Texas Instruments J721e EVM"; + + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + serial4 = &main_uart2; + serial6 = &main_uart4; + ethernet0 = &cpsw_port1; + mmc0 = &main_sdhci0; + mmc1 = &main_sdhci1; + }; + chosen { stdout-path = "serial2:115200n8"; - bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; }; gpio_keys: gpio-keys { compatible = "gpio-keys"; autorepeat; pinctrl-names = "default"; - pinctrl-0 = <&sw10_button_pins_default &sw11_button_pins_default>; + pinctrl-0 = <&sw10_button_pins_default>, <&sw11_button_pins_default>; - sw10: sw10 { + sw10: switch-10 { label = "GPIO Key USER1"; linux,code = <BTN_0>; gpios = <&main_gpio0 0 GPIO_ACTIVE_LOW>; }; - sw11: sw11 { + sw11: switch-11 { label = "GPIO Key USER2"; linux,code = <BTN_1>; gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>; @@ -93,7 +109,7 @@ <3300000 0x1>; }; - sound0: sound@0 { + sound0: sound-0 { compatible = "ti,j721e-cpb-audio"; model = "j721e-cpb"; @@ -109,16 +125,104 @@ "cpb-codec-scki", "cpb-codec-scki-48000", "cpb-codec-scki-44100"; }; + + transceiver1: can-phy0 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; + standby-gpios = <&wkup_gpio0 54 GPIO_ACTIVE_LOW>; + enable-gpios = <&wkup_gpio0 0 GPIO_ACTIVE_HIGH>; + }; + + transceiver2: can-phy1 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_gpio_pins_default>; + standby-gpios = <&wkup_gpio0 2 GPIO_ACTIVE_HIGH>; + }; + + transceiver3: can-phy2 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <5000000>; + standby-gpios = <&exp2 7 GPIO_ACTIVE_LOW>; + enable-gpios = <&exp2 6 GPIO_ACTIVE_HIGH>; + }; + + transceiver4: can-phy3 { + compatible = "ti,tcan1042"; + #phy-cells = <0>; + max-bitrate = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan2_gpio_pins_default>; + standby-gpios = <&main_gpio0 127 GPIO_ACTIVE_HIGH>; + }; + + dp_pwr_3v3: regulator-dp-pwr { + compatible = "regulator-fixed"; + regulator-name = "dp-pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&exp4 0 GPIO_ACTIVE_HIGH>; /* P0 - DP0_PWR_SW_EN */ + enable-active-high; + }; + + dp0: connector { + compatible = "dp-connector"; + label = "DP0"; + type = "full-size"; + dp-pwr-supply = <&dp_pwr_3v3>; + + port { + dp_connector_in: endpoint { + remote-endpoint = <&dp0_out>; + }; + }; + }; }; &main_pmx0 { - sw10_button_pins_default: sw10-button-pins-default { + main_uart0_pins_default: main-uart0-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x1d4, PIN_INPUT, 1) /* (Y3) SPI1_CS0.UART0_CTSn */ + J721E_IOPAD(0x1c0, PIN_OUTPUT, 1) /* (AA2) SPI0_CS0.UART0_RTSn */ + J721E_IOPAD(0x1e8, PIN_INPUT, 0) /* (AB2) UART0_RXD */ + J721E_IOPAD(0x1ec, PIN_OUTPUT, 0) /* (AB3) UART0_TXD */ + >; + }; + + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x1f8, PIN_INPUT, 0) /* (AA4) UART1_RXD */ + J721E_IOPAD(0x1fc, PIN_OUTPUT, 0) /* (AB4) UART1_TXD */ + >; + }; + + main_uart2_pins_default: main-uart2-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x1dc, PIN_INPUT, 3) /* (Y1) SPI1_CLK.UART2_RXD */ + J721E_IOPAD(0x1e0, PIN_OUTPUT, 3) /* (Y5) SPI1_D0.UART2_TXD */ + >; + }; + + main_uart4_pins_default: main-uart4-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x190, PIN_INPUT, 1) /* (W23) RGMII6_TD3.UART4_RXD */ + J721E_IOPAD(0x194, PIN_OUTPUT, 1) /* (W28) RGMII6_TD2.UART4_TXD */ + >; + }; + + sw10_button_pins_default: sw10-button-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x0, PIN_INPUT, 7) /* (AC18) EXTINTn.GPIO0_0 */ >; }; - main_mmc1_pins_default: main-mmc1-pins-default { + main_mmc1_pins_default: main-mmc1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x254, PIN_INPUT, 0) /* (R29) MMC1_CMD */ J721E_IOPAD(0x250, PIN_INPUT, 0) /* (P25) MMC1_CLK */ @@ -132,60 +236,66 @@ >; }; - vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-pins-default { + vdd_sd_dv_alt_pins_default: vdd-sd-dv-alt-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1d8, PIN_INPUT, 7) /* (W4) SPI1_CS1.GPIO0_117 */ >; }; - main_usbss0_pins_default: main-usbss0-pins-default { + main_usbss0_pins_default: main-usbss0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ >; }; - main_usbss1_pins_default: main-usbss1-pins-default { + main_usbss1_pins_default: main-usbss1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x214, PIN_OUTPUT, 4) /* (V4) MCAN1_TX.USB1_DRVVBUS */ >; }; - main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default { + dp0_pins_default: dp0-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x1c4, PIN_INPUT, 5) /* SPI0_CS1.DP0_HPD */ + >; + }; + + main_i2c1_exp4_pins_default: main-i2c1-exp4-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */ >; }; - main_i2c0_pins_default: main-i2c0-pins-default { + main_i2c0_pins_default: main-i2c0-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x220, PIN_INPUT_PULLUP, 0) /* (AC5) I2C0_SCL */ J721E_IOPAD(0x224, PIN_INPUT_PULLUP, 0) /* (AA5) I2C0_SDA */ >; }; - main_i2c1_pins_default: main-i2c1-pins-default { + main_i2c1_pins_default: main-i2c1-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x228, PIN_INPUT_PULLUP, 0) /* (Y6) I2C1_SCL */ J721E_IOPAD(0x22c, PIN_INPUT_PULLUP, 0) /* (AA6) I2C1_SDA */ >; }; - main_i2c3_pins_default: main-i2c3-pins-default { + main_i2c3_pins_default: main-i2c3-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x270, PIN_INPUT_PULLUP, 4) /* (T26) MMC2_CLK.I2C3_SCL */ J721E_IOPAD(0x274, PIN_INPUT_PULLUP, 4) /* (T25) MMC2_CMD.I2C3_SDA */ >; }; - main_i2c6_pins_default: main-i2c6-pins-default { + main_i2c6_pins_default: main-i2c6-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1d0, PIN_INPUT_PULLUP, 2) /* (AA3) SPI0_D1.I2C6_SCL */ J721E_IOPAD(0x1e4, PIN_INPUT_PULLUP, 2) /* (Y2) SPI1_D1.I2C6_SDA */ >; }; - mcasp10_pins_default: mcasp10-pins-default { + mcasp10_pins_default: mcasp10-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */ J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */ @@ -199,21 +309,57 @@ >; }; - audi_ext_refclk2_pins_default: audi-ext-refclk2-pins-default { + audi_ext_refclk2_pins_default: audi-ext-refclk2-default-pins { pinctrl-single,pins = < J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */ >; }; + + main_mcan0_pins_default: main-mcan0-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x208, PIN_INPUT, 0) /* (W5) MCAN0_RX */ + J721E_IOPAD(0x20c, PIN_OUTPUT, 0) /* (W6) MCAN0_TX */ + >; + }; + + main_mcan2_pins_default: main-mcan2-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x01f0, PIN_INPUT, 3) /* (AC2) MCAN2_RX.GPIO0_123 */ + J721E_IOPAD(0x01f4, PIN_OUTPUT, 3) /* (AB1) MCAN2_TX.GPIO0_124 */ + >; + }; + + main_mcan2_gpio_pins_default: main-mcan2-gpio-default-pins { + pinctrl-single,pins = < + J721E_IOPAD(0x200, PIN_INPUT, 7) /* (AC4) UART1_CTSn.GPIO0_127 */ + >; + }; }; &wkup_pmx0 { - sw11_button_pins_default: sw11-button-pins-default { + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xa0, PIN_INPUT, 0) /* (J29) WKUP_UART0_RXD */ + J721E_WKUP_IOPAD(0xa4, PIN_OUTPUT, 0) /* (J28) WKUP_UART0_TXD */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xe8, PIN_INPUT, 0) /* (H29) WKUP_GPIO0_14.MCU_UART0_CTSn */ + J721E_WKUP_IOPAD(0xec, PIN_OUTPUT, 0) /* (J27) WKUP_GPIO0_15.MCU_UART0_RTSn */ + J721E_WKUP_IOPAD(0xe4, PIN_INPUT, 0) /* (H28) WKUP_GPIO0_13.MCU_UART0_RXD */ + J721E_WKUP_IOPAD(0xe0, PIN_OUTPUT, 0) /* (G29) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + sw11_button_pins_default: sw11-button-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0xcc, PIN_INPUT, 7) /* (G28) WKUP_GPIO0_7 */ >; }; - mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-pins-default { + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x34, PIN_OUTPUT, 0) /* (F22) MCU_OSPI1_CLK */ J721E_WKUP_IOPAD(0x50, PIN_OUTPUT, 0) /* (C22) MCU_OSPI1_CSn0 */ @@ -226,7 +372,7 @@ >; }; - mcu_cpsw_pins_default: mcu-cpsw-pins-default { + mcu_cpsw_pins_default: mcu-cpsw-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */ J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* MCU_RGMII1_RX_CTL */ @@ -243,83 +389,103 @@ >; }; - mcu_mdio_pins_default: mcu-mdio1-pins-default { + mcu_mdio_pins_default: mcu-mdio1-default-pins { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* MCU_MDIO0_MDC */ J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */ >; }; -}; - -&wkup_uart0 { - /* Wakeup UART is used by System firmware */ - status = "reserved"; -}; -&main_uart0 { - power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; -}; + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xac, PIN_INPUT, 0) /* (C29) MCU_MCAN0_RX */ + J721E_WKUP_IOPAD(0xa8, PIN_OUTPUT, 0) /* (D29) MCU_MCAN0_TX */ + >; + }; -&main_uart3 { - /* UART not brought out */ - status = "disabled"; -}; + mcu_mcan0_gpio_pins_default: mcu-mcan0-gpio-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 7) /* (F26) WKUP_GPIO0_0 */ + J721E_WKUP_IOPAD(0x98, PIN_INPUT, 7) /* (E28) MCU_SPI0_D1.WKUP_GPIO0_54 */ + >; + }; -&main_uart5 { - /* UART not brought out */ - status = "disabled"; -}; + mcu_mcan1_pins_default: mcu-mcan1-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xc4, PIN_INPUT, 0) /* (G24) WKUP_GPIO0_5.MCU_MCAN1_RX */ + J721E_WKUP_IOPAD(0xc0, PIN_OUTPUT, 0) /* (G25) WKUP_GPIO0_4.MCU_MCAN1_TX */ + >; + }; -&main_uart6 { - /* UART not brought out */ - status = "disabled"; -}; + mcu_mcan1_gpio_pins_default: mcu-mcan1-gpio-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xb8, PIN_INPUT, 7) /* (F28) WKUP_GPIO0_2 */ + >; + }; -&main_uart7 { - /* UART not brought out */ - status = "disabled"; + wkup_gpio_pins_default: wkup-gpio-default-pins { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0xd0, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_8 */ + >; + }; }; -&main_uart8 { - /* UART not brought out */ - status = "disabled"; +&wkup_uart0 { + /* Wakeup UART is used by System firmware */ + status = "reserved"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; }; -&main_uart9 { - /* UART not brought out */ - status = "disabled"; +&mcu_uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; }; -&main_gpio2 { - status = "disabled"; +&main_uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart0_pins_default>; + /* Shared with ATF on this platform */ + power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>; }; -&main_gpio3 { - status = "disabled"; +&main_uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; }; -&main_gpio4 { - status = "disabled"; +&main_uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart2_pins_default>; }; -&main_gpio5 { - status = "disabled"; +&main_uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_uart4_pins_default>; }; -&main_gpio6 { - status = "disabled"; +&wkup_gpio0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wkup_gpio_pins_default>; }; -&main_gpio7 { - status = "disabled"; +&main_gpio0 { + status = "okay"; }; -&wkup_gpio1 { - status = "disabled"; +&main_gpio1 { + status = "okay"; }; &main_sdhci0 { /* eMMC */ + status = "okay"; non-removable; ti,driver-strength-ohm = <50>; disable-wp; @@ -327,6 +493,7 @@ &main_sdhci1 { /* SD/MMC */ + status = "okay"; vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vdd_sd_dv_alt>; pinctrl-names = "default"; @@ -335,11 +502,6 @@ disable-wp; }; -&main_sdhci2 { - /* Unused */ - status = "disabled"; -}; - &usb_serdes_mux { idle-states = <1>, <0>; /* USB0 to SERDES3, USB1 to SERDES1 */ }; @@ -396,7 +558,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; - flash@0{ + flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; spi-tx-bus-width = <1>; @@ -407,24 +569,71 @@ cdns,tchsh-ns = <60>; cdns,tslch-ns = <60>; cdns,read-delay = <2>; - #address-cells = <1>; - #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "qspi.tiboot3"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "qspi.tispl"; + reg = <0x80000 0x200000>; + }; + + partition@280000 { + label = "qspi.u-boot"; + reg = <0x280000 0x400000>; + }; + + partition@680000 { + label = "qspi.env"; + reg = <0x680000 0x20000>; + }; + + partition@6a0000 { + label = "qspi.env.backup"; + reg = <0x6a0000 0x20000>; + }; + + partition@6c0000 { + label = "qspi.sysfw"; + reg = <0x6c0000 0x100000>; + }; + + partition@800000 { + label = "qspi.rootfs"; + reg = <0x800000 0x37c0000>; + }; + + partition@3fe0000 { + label = "qspi.phypattern"; + reg = <0x3fe0000 0x20000>; + }; + }; }; }; &tscadc0 { + status = "okay"; adc { ti,adc-channels = <0 1 2 3 4 5 6 7>; }; }; &tscadc1 { + status = "okay"; adc { ti,adc-channels = <0 1 2 3 4 5 6 7>; }; }; &main_i2c0 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; clock-frequency = <400000>; @@ -461,6 +670,7 @@ }; &main_i2c1 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; @@ -486,6 +696,7 @@ }; &main_i2c3 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c3_pins_default>; clock-frequency = <400000>; @@ -524,6 +735,7 @@ }; &main_i2c6 { + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&main_i2c6_pins_default>; clock-frequency = <400000>; @@ -538,7 +750,7 @@ &mcu_cpsw { pinctrl-names = "default"; - pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; + pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>; }; &davinci_mdio { @@ -574,47 +786,35 @@ <&k3_clks 152 18>; /* PLL23_HSDIV0 */ }; -&mcasp0 { - status = "disabled"; -}; - -&mcasp1 { - status = "disabled"; -}; - -&mcasp2 { - status = "disabled"; -}; - -&mcasp3 { - status = "disabled"; -}; - -&mcasp4 { - status = "disabled"; -}; - -&mcasp5 { - status = "disabled"; -}; - -&mcasp6 { - status = "disabled"; +&dss_ports { + port { + dpi0_out: endpoint { + remote-endpoint = <&dp0_in>; + }; + }; }; -&mcasp7 { - status = "disabled"; -}; +&dp0_ports { + #address-cells = <1>; + #size-cells = <0>; -&mcasp8 { - status = "disabled"; -}; + port@0 { + reg = <0>; + dp0_in: endpoint { + remote-endpoint = <&dpi0_out>; + }; + }; -&mcasp9 { - status = "disabled"; + port@4 { + reg = <4>; + dp0_out: endpoint { + remote-endpoint = <&dp_connector_in>; + }; + }; }; &mcasp10 { + status = "okay"; #sound-dai-cells = <0>; pinctrl-names = "default"; @@ -632,10 +832,6 @@ rx-num-evt = <0>; }; -&mcasp11 { - status = "disabled"; -}; - &cmn_refclk1 { clock-frequency = <100000000>; }; @@ -709,7 +905,26 @@ }; }; +&serdes4 { + torrent_phy_dp: phy@0 { + reg = <0>; + resets = <&serdes_wiz4 1>; + cdns,phy-type = <PHY_TYPE_DP>; + cdns,num-lanes = <4>; + cdns,max-bit-rate = <5400>; + #phy-cells = <0>; + }; +}; + +&mhdp { + phys = <&torrent_phy_dp>; + phy-names = "dpphy"; + pinctrl-names = "default"; + pinctrl-0 = <&dp0_pins_default>; +}; + &pcie0_rc { + status = "okay"; reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>; phys = <&serdes0_pcie_link>; phy-names = "pcie-phy"; @@ -717,6 +932,7 @@ }; &pcie1_rc { + status = "okay"; reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; phys = <&serdes1_pcie_link>; phy-names = "pcie-phy"; @@ -724,49 +940,37 @@ }; &pcie2_rc { + status = "okay"; reset-gpios = <&exp2 20 GPIO_ACTIVE_HIGH>; phys = <&serdes2_pcie_link>; phy-names = "pcie-phy"; num-lanes = <2>; }; -&pcie0_ep { - phys = <&serdes0_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <1>; - status = "disabled"; -}; - -&pcie1_ep { - phys = <&serdes1_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <2>; - status = "disabled"; -}; - -&pcie2_ep { - phys = <&serdes2_pcie_link>; - phy-names = "pcie-phy"; - num-lanes = <2>; - status = "disabled"; -}; - -&pcie3_rc { - status = "disabled"; -}; - -&pcie3_ep { - status = "disabled"; +&mcu_mcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver1>; }; -&dss { - status = "disabled"; +&mcu_mcan1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan1_pins_default>; + phys = <&transceiver2>; }; -&icssg0_mdio { - status = "disabled"; +&main_mcan0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan0_pins_default>; + phys = <&transceiver3>; }; -&icssg1_mdio { - status = "disabled"; +&main_mcan2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan2_pins_default>; + phys = <&transceiver4>; }; |