diff options
Diffstat (limited to 'dts/src/arm64/ti/k3-j721e-common-proc-board.dts')
| -rw-r--r-- | dts/src/arm64/ti/k3-j721e-common-proc-board.dts | 171 |
1 files changed, 165 insertions, 6 deletions
diff --git a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts index 6df823aaa3..8bc1e6ecc5 100644 --- a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts +++ b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -34,6 +34,55 @@ gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>; }; }; + + evm_12v0: fixedregulator-evm12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "evm_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: fixedregulator-vsys3v3 { + /* Output of LMS140 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_5v0: fixedregulator-vsys5v0 { + /* Output of LM5140 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + sound0: sound@0 { + compatible = "ti,j721e-cpb-audio"; + model = "j721e-cpb"; + + ti,cpb-mcasp = <&mcasp10>; + ti,cpb-codec = <&pcm3168a_1>; + + clocks = <&k3_clks 184 1>, + <&k3_clks 184 2>, <&k3_clks 184 4>, + <&k3_clks 157 371>, + <&k3_clks 157 400>, <&k3_clks 157 401>; + clock-names = "cpb-mcasp-auxclk", + "cpb-mcasp-auxclk-48000", "cpb-mcasp-auxclk-44100", + "cpb-codec-scki", + "cpb-codec-scki-48000", "cpb-codec-scki-44100"; + }; }; &main_pmx0 { @@ -60,6 +109,7 @@ main_usbss0_pins_default: main_usbss0_pins_default { pinctrl-single,pins = < J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ + J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ >; }; @@ -103,10 +153,24 @@ >; }; - main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default { + mcasp10_pins_default: mcasp10_pins_default { pinctrl-single,pins = < - J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */ - >; + J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */ + J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */ + J721E_IOPAD(0x160, PIN_OUTPUT_PULLDOWN, 12) /* (V28) RGMII5_TD3.MCASP10_AXR0 */ + J721E_IOPAD(0x164, PIN_OUTPUT_PULLDOWN, 12) /* (V29) RGMII5_TD2.MCASP10_AXR1 */ + J721E_IOPAD(0x170, PIN_OUTPUT_PULLDOWN, 12) /* (U29) RGMII5_TXC.MCASP10_AXR2 */ + J721E_IOPAD(0x174, PIN_OUTPUT_PULLDOWN, 12) /* (U25) RGMII5_RXC.MCASP10_AXR3 */ + J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 12) /* (V25) RGMII6_TD1.MCASP10_AXR4 */ + J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 12) /* (W27) RGMII6_TD0.MCASP10_AXR5 */ + J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 12) /* (W29) RGMII6_TXC.MCASP10_AXR6 */ + >; + }; + + audi_ext_refclk2_pins_default: audi_ext_refclk2_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */ + >; }; }; @@ -335,16 +399,44 @@ status = "disabled"; }; +&usb_serdes_mux { + idle-states = <1>, <0>; /* USB0 to SERDES3, USB1 to SERDES1 */ +}; + +&serdes_ln_ctrl { + idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>, + <SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>, + <SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>, + <SERDES3_LANE0_USB3_0_SWAP>, <SERDES3_LANE1_USB3_0>, + <SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>; +}; + +&serdes_wiz3 { + typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>; + typec-dir-debounce-ms = <700>; /* TUSB321, tCCB_DEFAULT 133 ms */ +}; + +&serdes3 { + serdes3_usb_link: link@0 { + reg = <0>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USB3>; + resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>; + }; +}; + &usbss0 { pinctrl-names = "default"; pinctrl-0 = <&main_usbss0_pins_default>; - ti,usb2-only; ti,vbus-divider; }; &usb0 { dr_mode = "otg"; - maximum-speed = "high-speed"; + maximum-speed = "super-speed"; + phys = <&serdes3_usb_link>; + phy-names = "cdns3,usb3-phy"; }; &usbss1 { @@ -407,6 +499,22 @@ reg = <0x22>; gpio-controller; #gpio-cells = <2>; + + p09 { + /* P11 - MCASP/TRACE_MUX_S0 */ + gpio-hog; + gpios = <9 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "MCASP/TRACE_MUX_S0"; + }; + + p10 { + /* P12 - MCASP/TRACE_MUX_S1 */ + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "MCASP/TRACE_MUX_S1"; + }; }; }; @@ -429,6 +537,12 @@ }; }; +&k3_clks { + /* Confiure AUDIO_EXT_REFCLK2 pin as output */ + pinctrl-names = "default"; + pinctrl-0 = <&audi_ext_refclk2_pins_default>; +}; + &main_i2c3 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c3_pins_default>; @@ -440,6 +554,31 @@ gpio-controller; #gpio-cells = <2>; }; + + pcm3168a_1: audio-codec@44 { + compatible = "ti,pcm3168a"; + reg = <0x44>; + + #sound-dai-cells = <1>; + + reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>; + + /* C_AUDIO_REFCLK2 -> RGMII6_RXC (W26) */ + clocks = <&k3_clks 157 371>; + clock-names = "scki"; + + /* HSDIV3_16FFT_MAIN_4_HSDIVOUT2_CLK -> REFCLK2 */ + assigned-clocks = <&k3_clks 157 371>; + assigned-clock-parents = <&k3_clks 157 400>; + assigned-clock-rates = <24576000>; /* for 48KHz */ + + VDD1-supply = <&vsys_3v3>; + VDD2-supply = <&vsys_3v3>; + VCCAD1-supply = <&vsys_5v0>; + VCCAD2-supply = <&vsys_5v0>; + VCCDA1-supply = <&vsys_5v0>; + VCCDA2-supply = <&vsys_5v0>; + }; }; &main_i2c6 { @@ -492,3 +631,23 @@ <&k3_clks 152 11>, /* PLL18_HSDIV0 */ <&k3_clks 152 18>; /* PLL23_HSDIV0 */ }; + +&mcasp10 { + #sound-dai-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&mcasp10_pins_default>; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + auxclk-fs-ratio = <256>; + + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 1 1 1 + 2 2 2 0 + >; + tx-num-evt = <0>; + rx-num-evt = <0>; + + status = "okay"; +}; |