diff options
Diffstat (limited to 'dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts')
| -rw-r--r-- | dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts | 17 |
1 files changed, 13 insertions, 4 deletions
diff --git a/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts b/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts index e5699d0d91..d60110ad83 100644 --- a/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts +++ b/dts/src/arm64/xilinx/zynqmp-zcu100-revC.dts @@ -2,7 +2,7 @@ /* * dts file for Xilinx ZynqMP ZCU100 revC * - * (C) Copyright 2016 - 2018, Xilinx, Inc. + * (C) Copyright 2016 - 2019, Xilinx, Inc. * * Michal Simek <michal.simek@xilinx.com> * Nathalie Chan King Choy @@ -11,7 +11,7 @@ /dts-v1/; #include "zynqmp.dtsi" -#include "zynqmp-clk.dtsi" +#include "zynqmp-clk-ccf.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> @@ -103,6 +103,11 @@ reset-gpios = <&gpio 7 GPIO_ACTIVE_LOW>; /* WIFI_EN */ post-power-on-delay-ms = <10>; }; + + ina226 { + compatible = "iio-hwmon"; + io-channels = <&u35 0>, <&u35 1>, <&u35 2>, <&u35 3>; + }; }; &dcc { @@ -191,8 +196,9 @@ #size-cells = <0>; reg = <5>; /* PS_PMBUS */ - ina226@40 { /* u35 */ + u35: ina226@40 { /* u35 */ compatible = "ti,ina226"; + #io-channel-cells = <1>; reg = <0x40>; shunt-resistor = <10000>; /* MIO31 is alert which should be routed to PMUFW */ @@ -226,7 +232,6 @@ &sdhci0 { status = "okay"; no-1-8-v; - broken-cd; /* CD has to be enabled by default */ disable-wp; }; @@ -251,11 +256,13 @@ &spi0 { /* Low Speed connector */ status = "okay"; label = "LS-SPI0"; + num-cs = <1>; }; &spi1 { /* High Speed connector */ status = "okay"; label = "HS-SPI1"; + num-cs = <1>; }; &uart0 { @@ -274,11 +281,13 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + dr_mode = "peripheral"; }; /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; + dr_mode = "host"; }; &watchdog0 { |