diff options
Diffstat (limited to 'dts/src/arm64')
233 files changed, 19603 insertions, 3613 deletions
diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.1.dts b/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.1.dts index 06a775c416..3e99a87e9c 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.1.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.1.dts @@ -9,3 +9,22 @@ model = "Pine64 PinePhone Braveheart (1.1)"; compatible = "pine64,pinephone-1.1", "allwinner,sun50i-a64"; }; + +&backlight { + power-supply = <®_ldo_io0>; + /* + * PWM backlight circuit on this PinePhone revision was changed since + * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight + * being off is around 20%. Duty cycle for the lowest brightness level + * also varries quite a bit between individual boards, so the lowest + * value here was chosen as a safe default. + */ + brightness-levels = < + 774 793 814 842 + 882 935 1003 1088 + 1192 1316 1462 1633 + 1830 2054 2309 2596 + 2916 3271 3664 4096>; + num-interpolated-steps = <50>; + default-brightness-level = <400>; +}; diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.2.dts b/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.2.dts new file mode 100644 index 0000000000..a9f5b670c9 --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-a64-pinephone-1.2.dts @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Ondrej Jirman <megous@megous.com> + +/dts-v1/; + +#include "sun50i-a64-pinephone.dtsi" + +/ { + model = "Pine64 PinePhone (1.2)"; + compatible = "pine64,pinephone-1.2", "allwinner,sun50i-a64"; +}; + +&backlight { + power-supply = <®_ldo_io0>; + /* + * PWM backlight circuit on this PinePhone revision was changed since 1.0, + * and the lowest PWM duty cycle that doesn't lead to backlight being off + * is around 10%. Duty cycle for the lowest brightness level also varries + * quite a bit between individual boards, so the lowest value here was + * chosen as a safe default. + */ + brightness-levels = < + 5000 5248 5506 5858 6345 + 6987 7805 8823 10062 11543 + 13287 15317 17654 20319 23336 + 26724 30505 34702 39335 44427 + 50000 + >; + num-interpolated-steps = <50>; + default-brightness-level = <500>; +}; + +&lis3mdl { + /* + * Board revision 1.2 fixed routing of the interrupt to DRDY pin, + * enable interrupts. + */ + interrupt-parent = <&pio>; + interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */ +}; diff --git a/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi b/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi index cefda145c3..25150aba74 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi +++ b/dts/src/arm64/allwinner/sun50i-a64-pinephone.dtsi @@ -16,6 +16,13 @@ serial0 = &uart0; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>; + enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + /* Backlight configuration differs per PinePhone revision. */ + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -84,6 +91,28 @@ status = "okay"; }; +&de { + status = "okay"; +}; + +&dphy { + status = "okay"; +}; + +&dsi { + vcc-dsi-supply = <®_dldo1>; + status = "okay"; + + panel@0 { + compatible = "xingbangda,xbd599"; + reg = <0>; + reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */ + iovcc-supply = <®_dldo2>; + vcc-supply = <®_ldo_io0>; + backlight = <&backlight>; + }; +}; + &ehci0 { status = "okay"; }; @@ -92,11 +121,28 @@ status = "okay"; }; +&i2c0 { + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt917s"; + reg = <0x5d>; + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */ + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + AVDD28-supply = <®_ldo_io0>; + VDDIO-supply = <®_ldo_io0>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + }; +}; + &i2c1 { status = "okay"; /* Magnetometer */ - lis3mdl@1e { + lis3mdl: lis3mdl@1e { compatible = "st,lis3mdl-magn"; reg = <0x1e>; vdd-supply = <®_dldo1>; @@ -188,6 +234,10 @@ */ }; +&r_pwm { + status = "okay"; +}; + &r_rsb { status = "okay"; @@ -279,7 +329,7 @@ ®_dldo4 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <1800000>; regulator-name = "vcc-wifi-io"; }; diff --git a/dts/src/arm64/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts b/dts/src/arm64/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts index 2e2b14c0ae..8857a37915 100644 --- a/dts/src/arm64/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts +++ b/dts/src/arm64/allwinner/sun50i-h5-bananapi-m2-plus-v1.2.dts @@ -3,6 +3,7 @@ /dts-v1/; #include "sun50i-h5.dtsi" +#include "sun50i-h5-cpu-opp.dtsi" #include <arm/sunxi-bananapi-m2-plus-v1.2.dtsi> / { diff --git a/dts/src/arm64/allwinner/sun50i-h5-cpu-opp.dtsi b/dts/src/arm64/allwinner/sun50i-h5-cpu-opp.dtsi new file mode 100644 index 0000000000..b265720195 --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-h5-cpu-opp.dtsi @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org> + +/ { + cpu_opp_table: cpu-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <1000000 1000000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-648000000 { + opp-hz = /bits/ 64 <648000000>; + opp-microvolt = <1040000 1040000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <1080000 1080000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-912000000 { + opp-hz = /bits/ 64 <912000000>; + opp-microvolt = <1120000 1120000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-960000000 { + opp-hz = /bits/ 64 <960000000>; + opp-microvolt = <1160000 1160000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1200000 1200000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-microvolt = <1240000 1240000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1104000000 { + opp-hz = /bits/ 64 <1104000000>; + opp-microvolt = <1260000 1260000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + + opp-1152000000 { + opp-hz = /bits/ 64 <1152000000>; + opp-microvolt = <1300000 1300000 1310000>; + clock-latency-ns = <244144>; /* 8 32k periods */ + }; + }; +}; + +&cpu0 { + operating-points-v2 = <&cpu_opp_table>; +}; + +&cpu1 { + operating-points-v2 = <&cpu_opp_table>; +}; + +&cpu2 { + operating-points-v2 = <&cpu_opp_table>; +}; + +&cpu3 { + operating-points-v2 = <&cpu_opp_table>; +}; diff --git a/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts b/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts index 64d35daf20..d811df3328 100644 --- a/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts +++ b/dts/src/arm64/allwinner/sun50i-h5-libretech-all-h3-cc.dts @@ -4,6 +4,7 @@ /dts-v1/; #include "sun50i-h5.dtsi" +#include "sun50i-h5-cpu-opp.dtsi" #include <arm/sunxi-libretech-all-h3-cc.dtsi> / { diff --git a/dts/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/dts/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts index c95a685413..de19e68eb8 100644 --- a/dts/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts +++ b/dts/src/arm64/allwinner/sun50i-h5-orangepi-zero-plus2.dts @@ -30,6 +30,21 @@ }; }; + leds { + compatible = "gpio-leds"; + + pwr { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status { + label = "orangepi:red:status"; + gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; + }; + }; + reg_vcc3v3: vcc3v3 { compatible = "regulator-fixed"; regulator-name = "vcc3v3"; @@ -48,6 +63,10 @@ status = "okay"; }; +&ehci0 { + status = "okay"; +}; + &hdmi { status = "okay"; }; @@ -92,6 +111,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pa_pins>; @@ -103,3 +126,18 @@ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; status = "okay"; }; + +&usb_otg { + /* + * According to schematics CN1 MicroUSB port can be used to take + * external 5V to power up the board VBUS. On the contrary CN1 MicroUSB + * port cannot provide power externally even if the board is powered + * via GPIO pins. It thus makes sense to force peripheral mode. + */ + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/dts/src/arm64/allwinner/sun50i-h5.dtsi b/dts/src/arm64/allwinner/sun50i-h5.dtsi index 4462a68c06..6735e316a3 100644 --- a/dts/src/arm64/allwinner/sun50i-h5.dtsi +++ b/dts/src/arm64/allwinner/sun50i-h5.dtsi @@ -3,6 +3,8 @@ #include <arm/sunxi-h3-h5.dtsi> +#include <dt-bindings/thermal/thermal.h> + / { cpus { #address-cells = <1>; @@ -13,6 +15,9 @@ device_type = "cpu"; reg = <0>; enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + clock-latency-ns = <244144>; /* 8 32k periods */ + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -20,6 +25,9 @@ device_type = "cpu"; reg = <1>; enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + clock-latency-ns = <244144>; /* 8 32k periods */ + #cooling-cells = <2>; }; cpu2: cpu@2 { @@ -27,6 +35,9 @@ device_type = "cpu"; reg = <2>; enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + clock-latency-ns = <244144>; /* 8 32k periods */ + #cooling-cells = <2>; }; cpu3: cpu@3 { @@ -34,6 +45,9 @@ device_type = "cpu"; reg = <3>; enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + clock-latency-ns = <244144>; /* 8 32k periods */ + #cooling-cells = <2>; }; }; @@ -165,6 +179,30 @@ polling-delay-passive = <0>; polling-delay = <0>; thermal-sensors = <&ths 0>; + + trips { + cpu_hot_trip: cpu-hot { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_very_hot_trip: cpu-very-hot { + temperature = <100000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + cpu-hot-limit { + trip = <&cpu_hot_trip>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpu_thermal { diff --git a/dts/src/arm64/altera/socfpga_stratix10.dtsi b/dts/src/arm64/altera/socfpga_stratix10.dtsi index 9498d1de73..a6fb01c7ab 100644 --- a/dts/src/arm64/altera/socfpga_stratix10.dtsi +++ b/dts/src/arm64/altera/socfpga_stratix10.dtsi @@ -380,6 +380,7 @@ reg = <0xffda4000 0x1000>; interrupts = <0 99 4>; resets = <&rst SPIM0_RESET>; + reset-names = "spi"; reg-io-width = <4>; num-cs = <4>; clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; @@ -393,6 +394,7 @@ reg = <0xffda5000 0x1000>; interrupts = <0 100 4>; resets = <&rst SPIM1_RESET>; + reset-names = "spi"; reg-io-width = <4>; num-cs = <4>; clocks = <&clkmgr STRATIX10_L4_MAIN_CLK>; diff --git a/dts/src/arm64/al/alpine-v2-evp.dts b/dts/src/arm64/amazon/alpine-v2-evp.dts index a079d7b306..a079d7b306 100644 --- a/dts/src/arm64/al/alpine-v2-evp.dts +++ b/dts/src/arm64/amazon/alpine-v2-evp.dts diff --git a/dts/src/arm64/al/alpine-v2.dtsi b/dts/src/arm64/amazon/alpine-v2.dtsi index d5e7e2bb4e..d5e7e2bb4e 100644 --- a/dts/src/arm64/al/alpine-v2.dtsi +++ b/dts/src/arm64/amazon/alpine-v2.dtsi diff --git a/dts/src/arm64/amazon/alpine-v3-evp.dts b/dts/src/arm64/amazon/alpine-v3-evp.dts new file mode 100644 index 0000000000..48078f5ea5 --- /dev/null +++ b/dts/src/arm64/amazon/alpine-v3-evp.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020 Amazon.com, Inc. or its affiliates. All Rights Reserved. + */ + +#include "alpine-v3.dtsi" + +/ { + model = "Amazon's Annapurna Labs Alpine v3 Evaluation Platform (EVP)"; + compatible = "amazon,al-alpine-v3-evp", "amazon,al-alpine-v3"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { status = "okay"; }; diff --git a/dts/src/arm64/amazon/alpine-v3.dtsi b/dts/src/arm64/amazon/alpine-v3.dtsi new file mode 100644 index 0000000000..73a352ea8f --- /dev/null +++ b/dts/src/arm64/amazon/alpine-v3.dtsi @@ -0,0 +1,408 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020, Amazon.com, Inc. or its affiliates. All Rights Reserved + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Amazon's Annapurna Labs Alpine v3"; + compatible = "amazon,al-alpine-v3"; + + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster0_l2>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x1>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster0_l2>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x2>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster0_l2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x3>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster0_l2>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x100>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster1_l2>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x101>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster1_l2>; + }; + + cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x102>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster1_l2>; + }; + + cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x103>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster1_l2>; + }; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x200>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster2_l2>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x201>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster2_l2>; + }; + + cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x202>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster2_l2>; + }; + + cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x203>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster2_l2>; + }; + + cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x300>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster3_l2>; + }; + + cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x301>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster3_l2>; + }; + + cpu@302 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x302>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster3_l2>; + }; + + cpu@303 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x303>; + enable-method = "psci"; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + i-cache-size = <0xc000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + next-level-cache = <&cluster3_l2>; + }; + + cluster0_l2: cache@0 { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; + cache-level = <2>; + }; + + cluster1_l2: cache@100 { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; + cache-level = <2>; + }; + + cluster2_l2: cache@200 { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; + cache-level = <2>; + }; + + cluster3_l2: cache@300 { + compatible = "cache"; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; + cache-level = <2>; + }; + + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secmon@0 { + reg = <0x0 0x0 0x0 0x100000>; + no-map; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@f0000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0xf0800000 0 0x10000>, /* GICD */ + <0x0 0xf0a00000 0 0x200000>, /* GICR */ + <0x0 0xf0000000 0 0x2000>, /* GICC */ + <0x0 0xf0010000 0 0x1000>, /* GICH */ + <0x0 0xf0020000 0 0x2000>; /* GICV */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + pcie@fbd00000 { + compatible = "pci-host-ecam-generic"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + #interrupt-cells = <1>; + reg = <0x0 0xfbd00000 0x0 0x100000>; + interrupt-map-mask = <0xf800 0 0 7>; + /* 8 x legacy interrupts for SATA only */ + interrupt-map = <0x4000 0 0 1 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, + <0x4800 0 0 1 &gic 0 58 IRQ_TYPE_LEVEL_HIGH>, + <0x5000 0 0 1 &gic 0 59 IRQ_TYPE_LEVEL_HIGH>, + <0x5800 0 0 1 &gic 0 60 IRQ_TYPE_LEVEL_HIGH>, + <0x6000 0 0 1 &gic 0 61 IRQ_TYPE_LEVEL_HIGH>, + <0x6800 0 0 1 &gic 0 62 IRQ_TYPE_LEVEL_HIGH>, + <0x7000 0 0 1 &gic 0 63 IRQ_TYPE_LEVEL_HIGH>, + <0x7800 0 0 1 &gic 0 64 IRQ_TYPE_LEVEL_HIGH>; + ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>; + bus-range = <0x00 0x00>; + msi-parent = <&msix>; + }; + + msix: msix@fbe00000 { + compatible = "al,alpine-msix"; + reg = <0x0 0xfbe00000 0x0 0x100000>; + interrupt-controller; + msi-controller; + al,msi-base-spi = <336>; + al,msi-num-spis = <959>; + interrupt-parent = <&gic>; + }; + + io-fabric { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0xfc000000 0x2000000>; + + uart0: serial@1883000 { + compatible = "ns16550a"; + reg = <0x1883000 0x1000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; /* Filled by firmware */ + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial@1884000 { + compatible = "ns16550a"; + reg = <0x1884000 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; /* Filled by firmware */ + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart2: serial@1885000 { + compatible = "ns16550a"; + reg = <0x1885000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; /* Filled by firmware */ + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@1886000 { + compatible = "ns16550a"; + reg = <0x1886000 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; /* Filled by firmware */ + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + }; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-axg.dtsi b/dts/src/arm64/amlogic/meson-axg.dtsi index 8e6281c685..b9efc84692 100644 --- a/dts/src/arm64/amlogic/meson-axg.dtsi +++ b/dts/src/arm64/amlogic/meson-axg.dtsi @@ -181,8 +181,10 @@ interrupt-names = "macirq"; clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; + <&clkc CLKID_MPLL2>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "stmmaceth", "clkin0", "clkin1", + "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; status = "disabled"; diff --git a/dts/src/arm64/amlogic/meson-g12-common.dtsi b/dts/src/arm64/amlogic/meson-g12-common.dtsi index 593a006f4b..1e83ec5b8c 100644 --- a/dts/src/arm64/amlogic/meson-g12-common.dtsi +++ b/dts/src/arm64/amlogic/meson-g12-common.dtsi @@ -52,6 +52,39 @@ secure-monitor = <&sm>; }; + gpu_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp-124999998 { + opp-hz = /bits/ 64 <124999998>; + opp-microvolt = <800000>; + }; + opp-249999996 { + opp-hz = /bits/ 64 <249999996>; + opp-microvolt = <800000>; + }; + opp-285714281 { + opp-hz = /bits/ 64 <285714281>; + opp-microvolt = <800000>; + }; + opp-399999994 { + opp-hz = /bits/ 64 <399999994>; + opp-microvolt = <800000>; + }; + opp-499999992 { + opp-hz = /bits/ 64 <499999992>; + opp-microvolt = <800000>; + }; + opp-666666656 { + opp-hz = /bits/ 64 <666666656>; + opp-microvolt = <800000>; + }; + opp-799999987 { + opp-hz = /bits/ 64 <799999987>; + opp-microvolt = <800000>; + }; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -185,8 +218,10 @@ interrupt-names = "macirq"; clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; + <&clkc CLKID_MPLL2>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "stmmaceth", "clkin0", "clkin1", + "timing-adjustment"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; status = "disabled"; @@ -2360,21 +2395,7 @@ interrupt-names = "job", "mmu", "gpu"; clocks = <&clkc CLKID_MALI>; resets = <&reset RESET_DVALIN_CAPB3>, <&reset RESET_DVALIN>; - - /* - * Mali clocking is provided by two identical clock paths - * MALI_0 and MALI_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - */ - assigned-clocks = <&clkc CLKID_MALI_0_SEL>, - <&clkc CLKID_MALI_0>, - <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV2P5>, - <0>, /* Do Nothing */ - <&clkc CLKID_MALI_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <800000000>, - <0>; /* Do Nothing */ + operating-points-v2 = <&gpu_opp_table>; #cooling-cells = <2>; }; }; diff --git a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dts b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dts index 169ea283d4..34fffa6d85 100644 --- a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dts +++ b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dts @@ -9,6 +9,7 @@ #include "meson-g12b-s922x.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-toacodec.h> #include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { @@ -20,6 +21,14 @@ ethernet0 = ðmac; }; + dioo2133: audio-amplifier-0 { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; + VCC-supply = <&vcc_5v>; + sound-name-prefix = "U19"; + status = "okay"; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -209,11 +218,42 @@ sound { compatible = "amlogic,axg-sound-card"; model = "G12B-ODROID-N2"; - audio-aux-devs = <&tdmout_b>; + audio-widgets = "Line", "Lineout"; + audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>, + <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>, + <&dioo2133>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", "TDMOUT_B IN 2", "FRDDR_C OUT 1", - "TDM_B Playback", "TDMOUT_B OUT"; + "TDM_B Playback", "TDMOUT_B OUT", + "TDMOUT_C IN 0", "FRDDR_A OUT 2", + "TDMOUT_C IN 1", "FRDDR_B OUT 2", + "TDMOUT_C IN 2", "FRDDR_C OUT 2", + "TDM_C Playback", "TDMOUT_C OUT", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_B IN 4", "TDM_B Loopback", + "TDMIN_C IN 4", "TDM_B Loopback", + "TDMIN_LB IN 1", "TDM_B Loopback", + "TDMIN_A IN 5", "TDM_C Loopback", + "TDMIN_B IN 5", "TDM_C Loopback", + "TDMIN_C IN 5", "TDM_C Loopback", + "TDMIN_LB IN 2", "TDM_C Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT", + "TODDR_A IN 2", "TDMIN_C OUT", + "TODDR_B IN 2", "TDMIN_C OUT", + "TODDR_C IN 2", "TDMIN_C OUT", + "TODDR_A IN 6", "TDMIN_LB OUT", + "TODDR_B IN 6", "TDMIN_LB OUT", + "TODDR_C IN 6", "TDMIN_LB OUT", + "U19 INL", "ACODEC LOLP", + "U19 INR", "ACODEC LORP", + "Lineout", "U19 OUTL", + "Lineout", "U19 OUTR"; assigned-clocks = <&clkc CLKID_MPLL2>, <&clkc CLKID_MPLL0>, @@ -236,8 +276,20 @@ sound-dai = <&frddr_c>; }; - /* 8ch hdmi interface */ dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-6 { sound-dai = <&tdmif_b>; dai-format = "i2s"; dai-tdm-slot-tx-mask-0 = <1 1>; @@ -246,22 +298,56 @@ dai-tdm-slot-tx-mask-3 = <1 1>; mclk-fs = <256>; - codec { + codec-0 { sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_B>; + }; + }; + + /* i2s jack output interface */ + dai-link-7 { + sound-dai = <&tdmif_c>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>; + }; + + codec-1 { + sound-dai = <&toacodec TOACODEC_IN_C>; + }; }; /* hdmi glue */ - dai-link-4 { + dai-link-8 { sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; codec { sound-dai = <&hdmi_tx>; }; }; + + /* acodec glue */ + dai-link-9 { + sound-dai = <&toacodec TOACODEC_OUT>; + + codec { + sound-dai = <&acodec>; + }; + }; }; }; +&acodec { + AVDD-supply = <&vddao_1v8>; + status = "okay"; +}; + &arb { status = "okay"; }; @@ -476,14 +562,54 @@ status = "okay"; }; +&tdmif_c { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmin_c { + status = "okay"; +}; + +&tdmin_lb { + status = "okay"; +}; + &tdmout_b { status = "okay"; }; +&tdmout_c { + status = "okay"; +}; + +&toacodec { + status = "okay"; +}; + &tohdmitx { status = "okay"; }; +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/dts/src/arm64/amlogic/meson-g12b-w400.dtsi b/dts/src/arm64/amlogic/meson-g12b-w400.dtsi index 98b70d216a..2802ddbb83 100644 --- a/dts/src/arm64/amlogic/meson-g12b-w400.dtsi +++ b/dts/src/arm64/amlogic/meson-g12b-w400.dtsi @@ -336,9 +336,11 @@ bus-width = <4>; cap-sd-highspeed; - sd-uhs-sdr50; max-frequency = <100000000>; + /* WiFi firmware requires power to be kept while in suspend */ + keep-power-in-suspend; + non-removable; disable-wp; @@ -398,7 +400,7 @@ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; max-speed = <2000000>; clocks = <&wifi32k>; - clock-names = "lpo"; + clock-names = "lpo"; }; }; diff --git a/dts/src/arm64/amlogic/meson-gx-mali450.dtsi b/dts/src/arm64/amlogic/meson-gx-mali450.dtsi new file mode 100644 index 0000000000..f9771b51c8 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gx-mali450.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 BayLibre SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/ { + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + opp-microvolt = <950000>; + }; + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <950000>; + }; + opp-285714285 { + opp-hz = /bits/ 64 <285714285>; + opp-microvolt = <950000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <950000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <950000>; + }; + opp-666666666 { + opp-hz = /bits/ 64 <666666666>; + opp-microvolt = <950000>; + }; + opp-744000000 { + opp-hz = /bits/ 64 <744000000>; + opp-microvolt = <950000>; + }; + }; +}; + +&apb { + mali: gpu@c0000 { + compatible = "arm,mali-450"; + reg = <0x0 0xc0000 0x0 0x40000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1", + "pp2", "ppmmu2"; + operating-points-v2 = <&gpu_opp_table>; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-gx.dtsi b/dts/src/arm64/amlogic/meson-gx.dtsi index ba63c36b22..0edd137151 100644 --- a/dts/src/arm64/amlogic/meson-gx.dtsi +++ b/dts/src/arm64/amlogic/meson-gx.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/meson-gxbb-power.h> #include <dt-bindings/thermal/thermal.h> / { @@ -60,7 +61,7 @@ compatible = "amlogic,simple-framebuffer", "simple-framebuffer"; amlogic,pipeline = "vpu-cvbs"; - power-domains = <&pwrc_vpu>; + power-domains = <&pwrc PWRC_GXBB_VPU_ID>; status = "disabled"; }; @@ -68,7 +69,7 @@ compatible = "amlogic,simple-framebuffer", "simple-framebuffer"; amlogic,pipeline = "vpu-hdmi"; - power-domains = <&pwrc_vpu>; + power-domains = <&pwrc PWRC_GXBB_VPU_ID>; status = "disabled"; }; }; @@ -438,12 +439,6 @@ compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon"; reg = <0x0 0x0 0x0 0x100>; - pwrc_vpu: power-controller-vpu { - compatible = "amlogic,meson-gx-pwrc-vpu"; - #power-domain-cells = <0>; - amlogic,hhi-sysctrl = <&sysctrl>; - }; - clkc_AO: clock-controller { compatible = "amlogic,meson-gx-aoclkc"; #clock-cells = <1>; @@ -552,6 +547,12 @@ sysctrl: system-controller@0 { compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon"; reg = <0 0 0 0x400>; + + pwrc: power-controller { + compatible = "amlogic,meson-gxbb-pwrc"; + #power-domain-cells = <1>; + amlogic,ao-sysctrl = <&sysctrl_AO>; + }; }; mailbox: mailbox@404 { @@ -574,6 +575,7 @@ interrupt-names = "macirq"; rx-fifo-depth = <4096>; tx-fifo-depth = <2048>; + power-domains = <&pwrc PWRC_GXBB_ETHERNET_MEM_ID>; status = "disabled"; }; diff --git a/dts/src/arm64/amlogic/meson-gxbb.dtsi b/dts/src/arm64/amlogic/meson-gxbb.dtsi index 234490d3ee..7c029f552a 100644 --- a/dts/src/arm64/amlogic/meson-gxbb.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb.dtsi @@ -4,6 +4,7 @@ */ #include "meson-gx.dtsi" +#include "meson-gx-mali450.dtsi" #include <dt-bindings/gpio/meson-gxbb-gpio.h> #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> #include <dt-bindings/clock/gxbb-clkc.h> @@ -264,46 +265,6 @@ }; }; -&apb { - mali: gpu@c0000 { - compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; - reg = <0x0 0xc0000 0x0 0x40000>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gp", "gpmmu", "pp", "pmu", - "pp0", "ppmmu0", "pp1", "ppmmu1", - "pp2", "ppmmu2"; - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; - clock-names = "bus", "core"; - - /* - * Mali clocking is provided by two identical clock paths - * MALI_0 and MALI_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - */ - assigned-clocks = <&clkc CLKID_GP0_PLL>, - <&clkc CLKID_MALI_0_SEL>, - <&clkc CLKID_MALI_0>, - <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <0>, /* Do Nothing */ - <&clkc CLKID_GP0_PLL>, - <0>, /* Do Nothing */ - <&clkc CLKID_MALI_0>; - assigned-clock-rates = <744000000>, - <0>, /* Do Nothing */ - <744000000>, - <0>; /* Do Nothing */ - }; -}; - &cbus { spifc: spi@8c80 { compatible = "amlogic,meson-gxbb-spifc"; @@ -333,8 +294,9 @@ ðmac { clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; + <&clkc CLKID_MPLL2>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; }; &gpio_intc { @@ -385,6 +347,16 @@ clocks = <&clkc CLKID_I2C>; }; +&mali { + compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; + + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + + assigned-clocks = <&clkc CLKID_GP0_PLL>; + assigned-clock-rates = <744000000>; +}; + &periphs { pinctrl_periphs: pinctrl@4b0 { compatible = "amlogic,meson-gxbb-periphs-pinctrl"; @@ -747,7 +719,7 @@ }; }; -&pwrc_vpu { +&pwrc { resets = <&reset RESET_VIU>, <&reset RESET_VENC>, <&reset RESET_VCBUS>, @@ -760,6 +732,9 @@ <&reset RESET_VDI6>, <&reset RESET_VENCL>, <&reset RESET_VID_LOCK>; + reset-names = "viu", "venc", "vcbus", "bt656", + "dvin", "rdma", "venci", "vencp", + "vdac", "vdi6", "vencl", "vid_lock"; clocks = <&clkc CLKID_VPU>, <&clkc CLKID_VAPB>; clock-names = "vpu", "vapb"; @@ -866,7 +841,7 @@ &vpu { compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; - power-domains = <&pwrc_vpu>; + power-domains = <&pwrc PWRC_GXBB_VPU_ID>; }; &vdec { diff --git a/dts/src/arm64/amlogic/meson-gxl-mali.dtsi b/dts/src/arm64/amlogic/meson-gxl-mali.dtsi index 6aaafff674..478e755cc8 100644 --- a/dts/src/arm64/amlogic/meson-gxl-mali.dtsi +++ b/dts/src/arm64/amlogic/meson-gxl-mali.dtsi @@ -4,42 +4,14 @@ * Author: Neil Armstrong <narmstrong@baylibre.com> */ -&apb { - mali: gpu@c0000 { - compatible = "amlogic,meson-gxl-mali", "arm,mali-450"; - reg = <0x0 0xc0000 0x0 0x40000>; - interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "gp", "gpmmu", "pp", "pmu", - "pp0", "ppmmu0", "pp1", "ppmmu1", - "pp2", "ppmmu2"; - clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; - clock-names = "bus", "core"; +#include "meson-gx-mali450.dtsi" - /* - * Mali clocking is provided by two identical clock paths - * MALI_0 and MALI_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - */ - assigned-clocks = <&clkc CLKID_GP0_PLL>, - <&clkc CLKID_MALI_0_SEL>, - <&clkc CLKID_MALI_0>, - <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <0>, /* Do Nothing */ - <&clkc CLKID_GP0_PLL>, - <0>, /* Do Nothing */ - <&clkc CLKID_MALI_0>; - assigned-clock-rates = <744000000>, - <0>, /* Do Nothing */ - <744000000>, - <0>; /* Do Nothing */ - }; +&mali { + compatible = "amlogic,meson-gxl-mali", "arm,mali-450"; + + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + + assigned-clocks = <&clkc CLKID_GP0_PLL>; + assigned-clock-rates = <744000000>; }; diff --git a/dts/src/arm64/amlogic/meson-gxl-s805x.dtsi b/dts/src/arm64/amlogic/meson-gxl-s805x.dtsi index f9d7056484..2997584982 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s805x.dtsi +++ b/dts/src/arm64/amlogic/meson-gxl-s805x.dtsi @@ -11,14 +11,13 @@ }; /* The S805X Package doesn't seem to handle the 744MHz OPP correctly */ +&gpu_opp_table { + opp-744000000 { + status = "disabled"; + }; +}; + &mali { - assigned-clocks = <&clkc CLKID_MALI_0_SEL>, - <&clkc CLKID_MALI_0>, - <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, - <0>, /* Do Nothing */ - <&clkc CLKID_MALI_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <666666666>, - <0>; /* Do Nothing */ + /delete-property/ assigned-clocks; + /delete-property/ assigned-clock-rates; }; diff --git a/dts/src/arm64/amlogic/meson-gxl.dtsi b/dts/src/arm64/amlogic/meson-gxl.dtsi index 6c8b189884..c3ac531c4f 100644 --- a/dts/src/arm64/amlogic/meson-gxl.dtsi +++ b/dts/src/arm64/amlogic/meson-gxl.dtsi @@ -131,8 +131,9 @@ ðmac { clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; + <&clkc CLKID_MPLL2>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment"; mdio0: mdio { #address-cells = <1>; @@ -787,7 +788,7 @@ }; }; -&pwrc_vpu { +&pwrc { resets = <&reset RESET_VIU>, <&reset RESET_VENC>, <&reset RESET_VCBUS>, @@ -800,6 +801,9 @@ <&reset RESET_VDI6>, <&reset RESET_VENCL>, <&reset RESET_VID_LOCK>; + reset-names = "viu", "venc", "vcbus", "bt656", + "dvin", "rdma", "venci", "vencp", + "vdac", "vdi6", "vencl", "vid_lock"; clocks = <&clkc CLKID_VPU>, <&clkc CLKID_VAPB>; clock-names = "vpu", "vapb"; @@ -906,7 +910,7 @@ &vpu { compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; - power-domains = <&pwrc_vpu>; + power-domains = <&pwrc PWRC_GXBB_VPU_ID>; }; &vdec { diff --git a/dts/src/arm64/amlogic/meson-gxm-wetek-core2.dts b/dts/src/arm64/amlogic/meson-gxm-wetek-core2.dts new file mode 100644 index 0000000000..ec794c134c --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxm-wetek-core2.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Christian Hewitt <christianshewitt@gmail.com> + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> + +/ { + compatible = "wetek,core2", "amlogic,s912", "amlogic,meson-gxm"; + model = "WeTek Core 2"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */ + }; + + leds { + compatible = "gpio-leds"; + + blue { + color = <LED_COLOR_ID_BLUE>; + function = LED_FUNCTION_STATUS; + gpios = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-update { + label = "update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button-power { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; +}; + +/* Disabled as Realtek RTL8152 USB provides Ethernet */ +ðmac { + status = "disabled"; +}; + +&internal_phy { + status = "disabled"; +}; + +&ir { + linux,rc-map-name = "rc-wetek-play2"; +}; + +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-gxm.dtsi b/dts/src/arm64/amlogic/meson-gxm.dtsi index 40e3e123e0..fe41451122 100644 --- a/dts/src/arm64/amlogic/meson-gxm.dtsi +++ b/dts/src/arm64/amlogic/meson-gxm.dtsi @@ -82,6 +82,35 @@ #cooling-cells = <2>; }; }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-125000000 { + opp-hz = /bits/ 64 <125000000>; + opp-microvolt = <950000>; + }; + opp-250000000 { + opp-hz = /bits/ 64 <250000000>; + opp-microvolt = <950000>; + }; + opp-285714285 { + opp-hz = /bits/ 64 <285714285>; + opp-microvolt = <950000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <950000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <950000>; + }; + opp-666666666 { + opp-hz = /bits/ 64 <666666666>; + opp-microvolt = <950000>; + }; + }; }; &apb { @@ -106,21 +135,7 @@ interrupt-names = "job", "mmu", "gpu"; clocks = <&clkc CLKID_MALI>; resets = <&reset RESET_MALI_CAPB3>, <&reset RESET_MALI>; - - /* - * Mali clocking is provided by two identical clock paths - * MALI_0 and MALI_1 muxed to a single clock by a glitch - * free mux to safely change frequency while running. - */ - assigned-clocks = <&clkc CLKID_MALI_0_SEL>, - <&clkc CLKID_MALI_0>, - <&clkc CLKID_MALI>; /* Glitch free mux */ - assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, - <0>, /* Do Nothing */ - <&clkc CLKID_MALI_0>; - assigned-clock-rates = <0>, /* Do Nothing */ - <666666666>, - <0>; /* Do Nothing */ + operating-points-v2 = <&gpu_opp_table>; }; }; diff --git a/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi b/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi index 1ef1e3672b..94f75b4465 100644 --- a/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi +++ b/dts/src/arm64/amlogic/meson-khadas-vim3.dtsi @@ -183,6 +183,23 @@ hdmi-phandle = <&hdmi_tx>; }; +&cpu_thermal { + trips { + cpu_active: cpu-active { + temperature = <80000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map { + trip = <&cpu_active>; + cooling-device = <&khadas_mcu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +}; + &ext_mdio { external_phy: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ @@ -222,6 +239,12 @@ pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>; pinctrl-names = "default"; + khadas_mcu: system-controller@18 { + compatible = "khadas,mcu"; + reg = <0x18>; + #cooling-cells = <2>; + }; + gpio_expander: gpio-controller@20 { compatible = "ti,tca6408"; reg = <0x20>; @@ -270,7 +293,6 @@ bus-width = <4>; cap-sd-highspeed; - sd-uhs-sdr50; max-frequency = <100000000>; non-removable; @@ -337,7 +359,7 @@ pinctrl-0 = <&nor_pins>; pinctrl-names = "default"; - w25q32: spi-flash@0 { + w25q128: spi-flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "winbond,w25q128fw", "jedec,spi-nor"; diff --git a/dts/src/arm64/amlogic/meson-sm1-khadas-vim3l.dts b/dts/src/arm64/amlogic/meson-sm1-khadas-vim3l.dts index dbbf29a0db..0da56c051a 100644 --- a/dts/src/arm64/amlogic/meson-sm1-khadas-vim3l.dts +++ b/dts/src/arm64/amlogic/meson-sm1-khadas-vim3l.dts @@ -8,6 +8,7 @@ #include "meson-sm1.dtsi" #include "meson-khadas-vim3.dtsi" +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { compatible = "khadas,vim3l", "amlogic,sm1"; @@ -31,6 +32,69 @@ regulator-boot-on; regulator-always-on; }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "SM1-KHADAS-VIM3L"; + audio-aux-devs = <&tdmout_a>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; }; &cpu0 { @@ -61,6 +125,18 @@ clock-latency = <50000>; }; +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + &pwm_AO_cd { pinctrl-0 = <&pwm_ao_d_e_pins>; pinctrl-names = "default"; @@ -88,8 +164,24 @@ status = "okay"; }; +&sd_emmc_a { + sd-uhs-sdr50; +}; + &usb { phys = <&usb2_phy0>, <&usb2_phy1>; phy-names = "usb2-phy0", "usb2-phy1"; }; */ + +&tdmif_a { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/dts/src/arm64/amlogic/meson-sm1-odroid-c4.dts b/dts/src/arm64/amlogic/meson-sm1-odroid-c4.dts index 00d90b30f8..cf5a98f0e4 100644 --- a/dts/src/arm64/amlogic/meson-sm1-odroid-c4.dts +++ b/dts/src/arm64/amlogic/meson-sm1-odroid-c4.dts @@ -8,6 +8,7 @@ #include "meson-sm1.dtsi" #include <dt-bindings/gpio/meson-g12a-gpio.h> #include <dt-bindings/leds/common.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { compatible = "hardkernel,odroid-c4", "amlogic,sm1"; @@ -186,6 +187,69 @@ }; }; }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "SM1-ODROID-C4"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&clkc_audio { + status = "okay"; }; &cpu0 { @@ -237,6 +301,18 @@ amlogic,tx-delay-ns = <2>; }; +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + &gpio { gpio-line-names = /* GPIOZ */ @@ -381,6 +457,18 @@ vqmmc-supply = <&flash_1v8>; }; +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/dts/src/arm64/exynos/exynos5433.dtsi b/dts/src/arm64/exynos/exynos5433.dtsi index 6721966140..74ac4ac758 100644 --- a/dts/src/arm64/exynos/exynos5433.dtsi +++ b/dts/src/arm64/exynos/exynos5433.dtsi @@ -24,7 +24,7 @@ interrupt-parent = <&gic>; arm_a53_pmu { - compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3"; + compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, @@ -33,7 +33,7 @@ }; arm_a57_pmu { - compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; + compatible = "arm,cortex-a57-pmu"; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, @@ -256,7 +256,7 @@ cpu_on = <0xC4000003>; }; - soc: soc { + soc: soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -1756,33 +1756,26 @@ status = "disabled"; }; - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma0: pdma@15610000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x15610000 0x1000>; - interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cmu_fsys CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@15600000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x15600000 0x1000>; - interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cmu_fsys CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma0: pdma@15610000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x15610000 0x1000>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_fsys CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@15600000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x15600000 0x1000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_fsys CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; audio-subsystem@11400000 { diff --git a/dts/src/arm64/exynos/exynos7-espresso.dts b/dts/src/arm64/exynos/exynos7-espresso.dts index 7af288fa94..92fecc539c 100644 --- a/dts/src/arm64/exynos/exynos7-espresso.dts +++ b/dts/src/arm64/exynos/exynos7-espresso.dts @@ -157,6 +157,7 @@ regulator-min-microvolt = <700000>; regulator-max-microvolt = <1150000>; regulator-enable-ramp-delay = <125>; + regulator-always-on; }; ldo8_reg: LDO8 { @@ -193,6 +194,7 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1300000>; regulator-enable-ramp-delay = <125>; + regulator-always-on; }; ldo13_reg: LDO13 { @@ -406,6 +408,10 @@ }; }; +&ufs { + status = "okay"; +}; + &usbdrd_phy { vbus-supply = <&usb30_vbus_reg>; vbus-boost-supply = <&usb3drd_boost_5v>; diff --git a/dts/src/arm64/exynos/exynos7.dtsi b/dts/src/arm64/exynos/exynos7.dtsi index 5558045637..b9ed6a33e2 100644 --- a/dts/src/arm64/exynos/exynos7.dtsi +++ b/dts/src/arm64/exynos/exynos7.dtsi @@ -29,7 +29,7 @@ }; arm-pmu { - compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; + compatible = "arm,cortex-a57-pmu"; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, @@ -83,7 +83,7 @@ method = "smc"; }; - soc: soc { + soc: soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -105,33 +105,26 @@ <0x11006000 0x2000>; }; - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - pdma0: pdma@10e10000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x10E10000 0x1000>; - interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock_fsys0 ACLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma0: pdma@10e10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10E10000 0x1000>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock_fsys0 ACLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; - pdma1: pdma@10eb0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x10EB0000 0x1000>; - interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock_fsys0 ACLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; + pdma1: pdma@10eb0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10EB0000 0x1000>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock_fsys0 ACLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; }; clock_topc: clock-controller@10570000 { @@ -220,9 +213,14 @@ #clock-cells = <1>; clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>, <&clock_top1 DOUT_SCLK_MMC0>, - <&clock_top1 DOUT_SCLK_MMC1>; + <&clock_top1 DOUT_SCLK_MMC1>, + <&clock_top1 DOUT_SCLK_UFSUNIPRO20>, + <&clock_top1 DOUT_SCLK_PHY_FSYS1>, + <&clock_top1 DOUT_SCLK_PHY_FSYS1_26M>; clock-names = "fin_pll", "dout_aclk_fsys1_200", - "dout_sclk_mmc0", "dout_sclk_mmc1"; + "dout_sclk_mmc0", "dout_sclk_mmc1", + "dout_sclk_ufsunipro20", "dout_sclk_phy_fsys1", + "dout_sclk_phy_fsys1_26m"; }; serial_0: serial@13630000 { @@ -576,6 +574,11 @@ pwm: pwm@136c0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x136c0000 0x100>; + interrupts = <GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 453 IRQ_TYPE_LEVEL_HIGH>; samsung,pwm-outputs = <0>, <1>, <2>, <3>; #pwm-cells = <3>; clocks = <&clock_peric0 PCLK_PWM>; @@ -592,13 +595,38 @@ #thermal-sensor-cells = <0>; }; - thermal-zones { - atlas_thermal: cluster0-thermal { - polling-delay-passive = <0>; /* milliseconds */ - polling-delay = <0>; /* milliseconds */ - thermal-sensors = <&tmuctrl_0>; - #include "exynos7-trip-points.dtsi" - }; + ufs: ufs@15570000 { + compatible = "samsung,exynos7-ufs"; + reg = <0x15570000 0x100>, /* 0: HCI standard */ + <0x15570100 0x100>, /* 1: Vendor specificed */ + <0x15571000 0x200>, /* 2: UNIPRO */ + <0x15572000 0x300>; /* 3: UFS protector */ + reg-names = "hci", "vs_hci", "unipro", "ufsp"; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock_fsys1 ACLK_UFS20_LINK>, + <&clock_fsys1 SCLK_UFSUNIPRO20_USER>; + clock-names = "core_clk", "sclk_unipro_main"; + freq-table-hz = <0 0>, <0 0>; + pinctrl-names = "default"; + pinctrl-0 = <&ufs_rst_n &ufs_refclk_out>; + phys = <&ufs_phy>; + phy-names = "ufs-phy"; + status = "disabled"; + }; + + ufs_phy: ufs-phy@15571800 { + compatible = "samsung,exynos7-ufs-phy"; + reg = <0x15571800 0x240>; + reg-names = "phy-pma"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <0>; + clocks = <&clock_fsys1 SCLK_COMBO_PHY_EMBEDDED_26M>, + <&clock_fsys1 PHYCLK_UFS20_RX1_SYMBOL_USER>, + <&clock_fsys1 PHYCLK_UFS20_RX0_SYMBOL_USER>, + <&clock_fsys1 PHYCLK_UFS20_TX0_SYMBOL_USER>; + clock-names = "ref_clk", "rx1_symbol_clk", + "rx0_symbol_clk", + "tx0_symbol_clk"; }; usbdrd_phy: phy@15500000 { @@ -636,6 +664,15 @@ }; }; + thermal-zones { + atlas_thermal: cluster0-thermal { + polling-delay-passive = <0>; /* milliseconds */ + polling-delay = <0>; /* milliseconds */ + thermal-sensors = <&tmuctrl_0>; + #include "exynos7-trip-points.dtsi" + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 diff --git a/dts/src/arm64/freescale/fsl-ls1012a.dtsi b/dts/src/arm64/freescale/fsl-ls1012a.dtsi index 006e544d1f..ff19ec415b 100644 --- a/dts/src/arm64/freescale/fsl-ls1012a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1012a.dtsi @@ -17,6 +17,7 @@ aliases { crypto = &crypto; + rtc1 = &ftm_alarm0; rtic-a = &rtic_a; rtic-b = &rtic_b; rtic-c = &rtic_c; @@ -512,6 +513,20 @@ <0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + rcpm: power-controller@1ee2140 { + compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1ee2140 0x0 0x4>; + #fsl,rcpm-wakeup-cells = <1>; + }; + + ftm_alarm0: timer@29d0000 { + compatible = "fsl,ls1012a-ftm-alarm"; + reg = <0x0 0x29d0000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x20000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + big-endian; + }; }; firmware { diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts index dd69c5b821..e4f00c2b66 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts +++ b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts @@ -107,6 +107,91 @@ }; }; +&dspi0 { + bus-num = <0>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <0>; + spi-max-frequency = <10000000>; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <1>; + spi-max-frequency = <10000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <2>; + spi-max-frequency = <10000000>; + }; +}; + +&dspi1 { + bus-num = <1>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <0>; + spi-max-frequency = <10000000>; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <1>; + spi-max-frequency = <10000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <2>; + spi-max-frequency = <10000000>; + }; +}; + +&dspi2 { + bus-num = <2>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + &duart0 { status = "okay"; }; diff --git a/dts/src/arm64/freescale/fsl-ls1028a.dtsi b/dts/src/arm64/freescale/fsl-ls1028a.dtsi index 055f114cf8..0efeb8fa77 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1028a.dtsi @@ -17,6 +17,10 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + rtc1 = &ftm_alarm0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -129,12 +133,32 @@ }; thermal-zones { - core-cluster { + ddr-controller { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 0>; trips { + ddr-ctrler-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + ddr-ctrler-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + core-cluster { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 1>; + + trips { core_cluster_alert: core-cluster-alert { temperature = <85000>; hysteresis = <2000>; @@ -983,6 +1007,19 @@ }; }; }; + + rcpm: power-controller@1e34040 { + compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1e34040 0x0 0x1c>; + #fsl,rcpm-wakeup-cells = <7>; + }; + + ftm_alarm0: timer@2800000 { + compatible = "fsl,ls1028a-ftm-alarm"; + reg = <0x0 0x2800000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + }; }; malidp0: display@f080000 { diff --git a/dts/src/arm64/freescale/fsl-ls1043a-qds.dts b/dts/src/arm64/freescale/fsl-ls1043a-qds.dts index 1aac81da7e..fea167d222 100644 --- a/dts/src/arm64/freescale/fsl-ls1043a-qds.dts +++ b/dts/src/arm64/freescale/fsl-ls1043a-qds.dts @@ -148,4 +148,8 @@ }; }; +&usb0 { + status = "okay"; +}; + #include "fsl-ls1043-post.dtsi" diff --git a/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts index bfa9d957e5..3516af4726 100644 --- a/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts @@ -209,3 +209,11 @@ fsl,tdm-interface; }; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/fsl-ls1043a.dtsi b/dts/src/arm64/freescale/fsl-ls1043a.dtsi index 3b641bd432..5c2e370f63 100644 --- a/dts/src/arm64/freescale/fsl-ls1043a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1043a.dtsi @@ -27,6 +27,7 @@ ethernet4 = &enet4; ethernet5 = &enet5; ethernet6 = &enet6; + rtc1 = &ftm_alarm0; }; cpus { @@ -149,19 +150,79 @@ }; thermal-zones { - cpu_thermal: cpu-thermal { + ddr-controller { polling-delay-passive = <1000>; polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + trips { + ddr-ctrler-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + ddr-ctrler-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + serdes { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 1>; + + trips { + serdes-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + serdes-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + fman { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 2>; + + trips { + fman-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + fman-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + core-cluster { + polling-delay-passive = <1000>; + polling-delay = <5000>; thermal-sensors = <&tmu 3>; trips { - cpu_alert: cpu-alert { + core_cluster_alert: core-cluster-alert { temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit: cpu-crit { + + core_cluster_crit: core-cluster-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; @@ -170,7 +231,7 @@ cooling-maps { map0 { - trip = <&cpu_alert>; + trip = <&core_cluster_alert>; cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, @@ -179,6 +240,26 @@ }; }; }; + + sec { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 4>; + + trips { + sec-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + sec-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; }; timer { @@ -677,6 +758,7 @@ snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; }; usb1: usb3@3000000 { @@ -687,6 +769,7 @@ snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; }; usb2: usb3@3100000 { @@ -697,6 +780,7 @@ snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + status = "disabled"; }; sata: sata@3200000 { @@ -829,6 +913,19 @@ big-endian; }; + rcpm: power-controller@1ee2140 { + compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1ee2140 0x0 0x4>; + #fsl,rcpm-wakeup-cells = <1>; + }; + + ftm_alarm0: timer@29d0000 { + compatible = "fsl,ls1043a-ftm-alarm"; + reg = <0x0 0x29d0000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x20000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + big-endian; + }; }; firmware { diff --git a/dts/src/arm64/freescale/fsl-ls1046a.dtsi b/dts/src/arm64/freescale/fsl-ls1046a.dtsi index d4c1da3d4b..0246d975a2 100644 --- a/dts/src/arm64/freescale/fsl-ls1046a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1046a.dtsi @@ -28,6 +28,7 @@ ethernet5 = &enet5; ethernet6 = &enet6; ethernet7 = &enet7; + rtc1 = &ftm_alarm0; }; cpus { @@ -117,19 +118,79 @@ }; thermal-zones { - cpu_thermal: cpu-thermal { + ddr-controller { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + ddr-ctrler-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + ddr-ctrler-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + serdes { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 1>; + + trips { + serdes-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + serdes-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + fman { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 2>; + + trips { + fman-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + fman-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + core-cluster { polling-delay-passive = <1000>; polling-delay = <5000>; thermal-sensors = <&tmu 3>; trips { - cpu_alert: cpu-alert { + core_cluster_alert: core-cluster-alert { temperature = <85000>; hysteresis = <2000>; type = "passive"; }; - cpu_crit: cpu-crit { + core_cluster_crit: core-cluster-crit { temperature = <95000>; hysteresis = <2000>; type = "critical"; @@ -138,7 +199,7 @@ cooling-maps { map0 { - trip = <&cpu_alert>; + trip = <&core_cluster_alert>; cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, @@ -147,6 +208,26 @@ }; }; }; + + sec { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 4>; + + trips { + sec-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + sec-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; }; timer { @@ -765,6 +846,20 @@ queue-sizes = <64 64>; big-endian; }; + + rcpm: power-controller@1ee2140 { + compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1ee2140 0x0 0x4>; + #fsl,rcpm-wakeup-cells = <1>; + }; + + ftm_alarm0: timer@29d0000 { + compatible = "fsl,ls1046a-ftm-alarm"; + reg = <0x0 0x29d0000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x20000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + big-endian; + }; }; reserved-memory { diff --git a/dts/src/arm64/freescale/fsl-ls1088a.dtsi b/dts/src/arm64/freescale/fsl-ls1088a.dtsi index 36a7995546..169f4742ae 100644 --- a/dts/src/arm64/freescale/fsl-ls1088a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1088a.dtsi @@ -18,6 +18,7 @@ aliases { crypto = &crypto; + rtc1 = &ftm_alarm0; }; cpus { @@ -781,6 +782,19 @@ }; }; }; + + rcpm: power-controller@1e34040 { + compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1e34040 0x0 0x18>; + #fsl,rcpm-wakeup-cells = <6>; + }; + + ftm_alarm0: timer@2800000 { + compatible = "fsl,ls1088a-ftm-alarm"; + reg = <0x0 0x2800000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + }; }; firmware { diff --git a/dts/src/arm64/freescale/fsl-ls208xa.dtsi b/dts/src/arm64/freescale/fsl-ls208xa.dtsi index 3944ef16ec..41102dacc2 100644 --- a/dts/src/arm64/freescale/fsl-ls208xa.dtsi +++ b/dts/src/arm64/freescale/fsl-ls208xa.dtsi @@ -20,6 +20,7 @@ aliases { crypto = &crypto; + rtc1 = &ftm_alarm0; serial0 = &serial0; serial1 = &serial1; serial2 = &serial2; @@ -763,6 +764,19 @@ reg = <0x0 0x04000000 0x0 0x01000000>; interrupts = <0 12 4>; }; + + rcpm: power-controller@1e34040 { + compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1e34040 0x0 0x18>; + #fsl,rcpm-wakeup-cells = <6>; + }; + + ftm_alarm0: timer@2800000 { + compatible = "fsl,ls208xa-ftm-alarm"; + reg = <0x0 0x2800000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + }; }; ddr1: memory-controller@1080000 { diff --git a/dts/src/arm64/freescale/fsl-lx2160a-qds.dts b/dts/src/arm64/freescale/fsl-lx2160a-qds.dts index 3b88e1efe4..2d1fe6c379 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a-qds.dts +++ b/dts/src/arm64/freescale/fsl-lx2160a-qds.dts @@ -35,6 +35,42 @@ status = "okay"; }; +&dspi0 { + status = "okay"; + + dflash0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + +&dspi1 { + status = "okay"; + + dflash1: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + +&dspi2 { + status = "okay"; + + dflash2: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + &esdhc0 { status = "okay"; }; diff --git a/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts b/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts index 22d0308eb1..54fe8cd3a7 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-lx2160a-rdb.dts @@ -121,7 +121,7 @@ power-monitor@40 { compatible = "ti,ina220"; reg = <0x40>; - shunt-resistor = <1000>; + shunt-resistor = <500>; }; }; diff --git a/dts/src/arm64/freescale/fsl-lx2160a.dtsi b/dts/src/arm64/freescale/fsl-lx2160a.dtsi index abaeb587de..d247e4228d 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a.dtsi +++ b/dts/src/arm64/freescale/fsl-lx2160a.dtsi @@ -2,7 +2,7 @@ // // Device Tree Include file for Layerscape-LX2160A family SoC. // -// Copyright 2018 NXP +// Copyright 2018-2020 NXP #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -16,6 +16,10 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + rtc1 = &ftm_alarm0; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -777,6 +781,45 @@ status = "disabled"; }; + dspi0: spi@2100000 { + compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 7>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <0>; + status = "disabled"; + }; + + dspi1: spi@2110000 { + compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2110000 0x0 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 7>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <1>; + status = "disabled"; + }; + + dspi2: spi@2120000 { + compatible = "fsl,lx2160a-dspi", "fsl,ls2085a-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2120000 0x0 0x10000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 7>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <2>; + status = "disabled"; + }; + esdhc0: esdhc@2140000 { compatible = "fsl,esdhc"; reg = <0x0 0x2140000 0x0 0x10000>; @@ -888,6 +931,20 @@ timeout-sec = <30>; }; + rcpm: power-controller@1e34040 { + compatible = "fsl,lx2160a-rcpm", "fsl,qoriq-rcpm-2.1+"; + reg = <0x0 0x1e34040 0x0 0x1c>; + #fsl,rcpm-wakeup-cells = <7>; + little-endian; + }; + + ftm_alarm0: timer@2800000 { + compatible = "fsl,lx2160a-ftm-alarm"; + reg = <0x0 0x2800000 0x0 0x10000>; + fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + }; + usb0: usb@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; @@ -957,7 +1014,7 @@ pcie@3400000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x80 0x00000000 0x0 0x00001000>; /* configuration space */ + 0x80 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ @@ -985,7 +1042,7 @@ pcie@3500000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x88 0x00000000 0x0 0x00001000>; /* configuration space */ + 0x88 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ @@ -1013,7 +1070,7 @@ pcie@3600000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ - 0x90 0x00000000 0x0 0x00001000>; /* configuration space */ + 0x90 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ @@ -1041,7 +1098,7 @@ pcie@3700000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ - 0x98 0x00000000 0x0 0x00001000>; /* configuration space */ + 0x98 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ @@ -1069,7 +1126,7 @@ pcie@3800000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03800000 0x0 0x00100000 /* controller registers */ - 0xa0 0x00000000 0x0 0x00001000>; /* configuration space */ + 0xa0 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ @@ -1097,7 +1154,7 @@ pcie@3900000 { compatible = "fsl,lx2160a-pcie"; reg = <0x00 0x03900000 0x0 0x00100000 /* controller registers */ - 0xa8 0x00000000 0x0 0x00001000>; /* configuration space */ + 0xa8 0x00000000 0x0 0x00002000>; /* configuration space */ reg-names = "csr_axi_slave", "config_axi_slave"; interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */ <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */ diff --git a/dts/src/arm64/freescale/imx8mm.dtsi b/dts/src/arm64/freescale/imx8mm.dtsi index aaf6e71101..76f040e4be 100644 --- a/dts/src/arm64/freescale/imx8mm.dtsi +++ b/dts/src/arm64/freescale/imx8mm.dtsi @@ -18,10 +18,18 @@ aliases { ethernet0 = &fec1; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -29,14 +37,6 @@ spi0 = &ecspi1; spi1 = &ecspi2; spi2 = &ecspi3; - mmc0 = &usdhc1; - mmc1 = &usdhc2; - mmc2 = &usdhc3; - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; }; cpus { @@ -467,7 +467,7 @@ reg = <0x30340000 0x10000>; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>; @@ -775,6 +775,14 @@ status = "disabled"; }; + mu: mailbox@30aa0000 { + compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu"; + reg = <0x30aa0000 0x10000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_MU_ROOT>; + #mbox-cells = <2>; + }; + usdhc1: mmc@30b40000 { compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b40000 0x10000>; diff --git a/dts/src/arm64/freescale/imx8mn-evk.dts b/dts/src/arm64/freescale/imx8mn-evk.dts index 61f3519586..b846526a8d 100644 --- a/dts/src/arm64/freescale/imx8mn-evk.dts +++ b/dts/src/arm64/freescale/imx8mn-evk.dts @@ -13,6 +13,102 @@ compatible = "fsl,imx8mn-evk", "fsl,imx8mn"; }; +&i2c1 { + pmic: pmic@25 { + compatible = "nxp,pca9450b"; + reg = <0x25>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + + regulators { + buck1: BUCK1{ + regulator-name = "BUCK1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <2187500>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + buck4: BUCK4{ + regulator-name = "BUCK4"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5{ + regulator-name = "BUCK5"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + &A53_0 { /delete-property/operating-points-v2; }; diff --git a/dts/src/arm64/freescale/imx8mn-evk.dtsi b/dts/src/arm64/freescale/imx8mn-evk.dtsi index 85fc0aa38c..98f5324b1d 100644 --- a/dts/src/arm64/freescale/imx8mn-evk.dtsi +++ b/dts/src/arm64/freescale/imx8mn-evk.dtsi @@ -223,6 +223,12 @@ >; }; + pinctrl_pmic: pmicirq { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { fsl,pins = < MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 diff --git a/dts/src/arm64/freescale/imx8mn.dtsi b/dts/src/arm64/freescale/imx8mn.dtsi index 9a4b65a267..9385dd7d1a 100644 --- a/dts/src/arm64/freescale/imx8mn.dtsi +++ b/dts/src/arm64/freescale/imx8mn.dtsi @@ -374,7 +374,7 @@ reg = <0x30340000 0x10000>; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mn-ocotp", "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MN_CLK_OCOTP_ROOT>; @@ -675,6 +675,14 @@ status = "disabled"; }; + mu: mailbox@30aa0000 { + compatible = "fsl,imx8mn-mu", "fsl,imx6sx-mu"; + reg = <0x30aa0000 0x10000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_MU_ROOT>; + #mbox-cells = <2>; + }; + usdhc1: mmc@30b40000 { compatible = "fsl,imx8mn-usdhc", "fsl,imx7d-usdhc"; reg = <0x30b40000 0x10000>; diff --git a/dts/src/arm64/freescale/imx8mp.dtsi b/dts/src/arm64/freescale/imx8mp.dtsi index 45e2c0a4e8..9de2aa1c57 100644 --- a/dts/src/arm64/freescale/imx8mp.dtsi +++ b/dts/src/arm64/freescale/imx8mp.dtsi @@ -23,6 +23,12 @@ gpio2 = &gpio3; gpio3 = &gpio4; gpio4 = &gpio5; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + i2c4 = &i2c5; + i2c5 = &i2c6; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; @@ -307,8 +313,8 @@ reg = <0x30340000 0x10000>; }; - ocotp: ocotp-ctrl@30350000 { - compatible = "fsl,imx8mp-ocotp", "syscon"; + ocotp: efuse@30350000 { + compatible = "fsl,imx8mp-ocotp", "fsl,imx8mm-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MP_CLK_OCOTP_ROOT>; /* For nvmem subnodes */ @@ -621,6 +627,14 @@ status = "disabled"; }; + mu: mailbox@30aa0000 { + compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu"; + reg = <0x30aa0000 0x10000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MU_ROOT>; + #mbox-cells = <2>; + }; + i2c5: i2c@30ad0000 { compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c"; #address-cells = <1>; @@ -730,5 +744,11 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&gic>; }; + + ddr-pmu@3d800000 { + compatible = "fsl,imx8mp-ddr-pmu", "fsl,imx8m-ddr-pmu"; + reg = <0x3d800000 0x400000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/dts/src/arm64/freescale/imx8mq-zii-ultra.dtsi b/dts/src/arm64/freescale/imx8mq-zii-ultra.dtsi index 6a55165bd7..0d1088dcaa 100644 --- a/dts/src/arm64/freescale/imx8mq-zii-ultra.dtsi +++ b/dts/src/arm64/freescale/imx8mq-zii-ultra.dtsi @@ -131,6 +131,8 @@ mdio { #address-cells = <1>; #size-cells = <0>; + clock-frequency = <12500000>; + suppress-preamble; status = "okay"; switch: switch@0 { diff --git a/dts/src/arm64/freescale/imx8mq.dtsi b/dts/src/arm64/freescale/imx8mq.dtsi index 978f8122c0..f70435cf9a 100644 --- a/dts/src/arm64/freescale/imx8mq.dtsi +++ b/dts/src/arm64/freescale/imx8mq.dtsi @@ -20,6 +20,7 @@ #size-cells = <2>; aliases { + ethernet0 = &fec1; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -29,6 +30,8 @@ i2c1 = &i2c2; i2c2 = &i2c3; i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; @@ -539,7 +542,7 @@ }; }; - ocotp: ocotp-ctrl@30350000 { + ocotp: efuse@30350000 { compatible = "fsl,imx8mq-ocotp", "syscon"; reg = <0x30350000 0x10000>; clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>; @@ -675,6 +678,7 @@ pgc_vpu: power-domain@6 { #power-domain-cells = <0>; reg = <IMX8M_POWER_DOMAIN_VPU>; + clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>; }; pgc_disp: power-domain@7 { @@ -959,6 +963,14 @@ status = "disabled"; }; + mu: mailbox@30aa0000 { + compatible = "fsl,imx8mq-mu", "fsl,imx6sx-mu"; + reg = <0x30aa0000 0x10000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_MU_ROOT>; + #mbox-cells = <2>; + }; + usdhc1: mmc@30b40000 { compatible = "fsl,imx8mq-usdhc", "fsl,imx7d-usdhc"; @@ -1142,6 +1154,32 @@ status = "disabled"; }; + vpu: video-codec@38300000 { + compatible = "nxp,imx8mq-vpu"; + reg = <0x38300000 0x10000>, + <0x38310000 0x10000>, + <0x38320000 0x10000>; + reg-names = "g1", "g2", "ctrl"; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "g1", "g2"; + clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>, + <&clk IMX8MQ_CLK_VPU_G2_ROOT>, + <&clk IMX8MQ_CLK_VPU_DEC_ROOT>; + clock-names = "g1", "g2", "bus"; + assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>, + <&clk IMX8MQ_CLK_VPU_G2>, + <&clk IMX8MQ_CLK_VPU_BUS>, + <&clk IMX8MQ_VPU_PLL_BYPASS>; + assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>, + <&clk IMX8MQ_VPU_PLL_OUT>, + <&clk IMX8MQ_SYS1_PLL_800M>, + <&clk IMX8MQ_VPU_PLL>; + assigned-clock-rates = <600000000>, <600000000>, + <800000000>, <0>; + power-domains = <&pgc_vpu>; + }; + pcie0: pcie@33800000 { compatible = "fsl,imx8mq-pcie"; reg = <0x33800000 0x400000>, diff --git a/dts/src/arm64/freescale/imx8qxp.dtsi b/dts/src/arm64/freescale/imx8qxp.dtsi index d1c3c98e4b..e46faac1fe 100644 --- a/dts/src/arm64/freescale/imx8qxp.dtsi +++ b/dts/src/arm64/freescale/imx8qxp.dtsi @@ -19,6 +19,8 @@ #size-cells = <2>; aliases { + ethernet0 = &fec1; + ethernet1 = &fec2; gpio0 = &lsio_gpio0; gpio1 = &lsio_gpio1; gpio2 = &lsio_gpio2; @@ -27,10 +29,18 @@ gpio5 = &lsio_gpio5; gpio6 = &lsio_gpio6; gpio7 = &lsio_gpio7; + i2c0 = &adma_i2c0; + i2c1 = &adma_i2c1; + i2c2 = &adma_i2c2; + i2c3 = &adma_i2c3; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; + mu0 = &lsio_mu0; mu1 = &lsio_mu1; + mu2 = &lsio_mu2; + mu3 = &lsio_mu3; + mu4 = &lsio_mu4; serial0 = &adma_lpuart0; serial1 = &adma_lpuart1; serial2 = &adma_lpuart2; diff --git a/dts/src/arm64/hisilicon/hi3660-hikey960.dts b/dts/src/arm64/hisilicon/hi3660-hikey960.dts index e035cf195b..c1b614dabb 100644 --- a/dts/src/arm64/hisilicon/hi3660-hikey960.dts +++ b/dts/src/arm64/hisilicon/hi3660-hikey960.dts @@ -13,6 +13,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/usb/pd.h> / { model = "HiKey960"; @@ -526,10 +527,63 @@ &i2c1 { status = "okay"; + rt1711h: rt1711h@4e { + compatible = "richtek,rt1711h"; + reg = <0x4e>; + status = "ok"; + interrupt-parent = <&gpio27>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_cfg_func>; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 5000, 1000)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + usb_con_ss: endpoint { + remote-endpoint = <&dwc3_ss>; + }; + }; + }; + }; + port { + #address-cells = <1>; + #size-cells = <0>; + + rt1711h_ep: endpoint@0 { + reg = <0>; + remote-endpoint = <&dwc3_role_switch>; + }; + }; + }; + adv7533: adv7533@39 { status = "ok"; compatible = "adi,adv7533"; reg = <0x39>; + adi,dsi-lanes = <4>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + }; }; }; @@ -612,3 +666,32 @@ interrupts = <3 IRQ_TYPE_EDGE_RISING>; }; }; + +&dwc3 { /* USB */ + dr_mode = "otg"; + maximum-speed = "super-speed"; + phy_type = "utmi"; + snps,dis-del-phy-power-chg-quirk; + snps,lfps_filter_quirk; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,tx_de_emphasis_quirk; + snps,tx_de_emphasis = <1>; + snps,dis_enblslpm_quirk; + snps,gctl-reset-quirk; + usb-role-switch; + role-switch-default-mode = "host"; + port { + #address-cells = <1>; + #size-cells = <0>; + dwc3_role_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&rt1711h_ep>; + }; + + dwc3_ss: endpoint@1 { + reg = <1>; + remote-endpoint = <&usb_con_ss>; + }; + }; +}; diff --git a/dts/src/arm64/hisilicon/hi3660.dtsi b/dts/src/arm64/hisilicon/hi3660.dtsi index c39b78989f..d25aac5e0b 100644 --- a/dts/src/arm64/hisilicon/hi3660.dtsi +++ b/dts/src/arm64/hisilicon/hi3660.dtsi @@ -1152,6 +1152,40 @@ }; }; }; + + usb3_otg_bc: usb3_otg_bc@ff200000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0xff200000 0x0 0x1000>; + + usb_phy: usb-phy { + compatible = "hisilicon,hi3660-usb-phy"; + #phy-cells = <0>; + hisilicon,pericrg-syscon = <&crg_ctrl>; + hisilicon,pctrl-syscon = <&pctrl>; + hisilicon,eye-diagram-param = <0x22466e4>; + }; + }; + + dwc3: dwc3@ff100000 { + compatible = "snps,dwc3"; + reg = <0x0 0xff100000 0x0 0x100000>; + + clocks = <&crg_ctrl HI3660_CLK_ABB_USB>, + <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>; + clock-names = "ref", "bus_early"; + + assigned-clocks = <&crg_ctrl HI3660_ACLK_GATE_USB3OTG>; + assigned-clock-rates = <229000000>; + + resets = <&crg_rst 0x90 8>, + <&crg_rst 0x90 7>, + <&crg_rst 0x90 6>, + <&crg_rst 0x90 5>; + + interrupts = <0 159 4>, <0 161 4>; + phys = <&usb_phy>; + phy-names = "usb3-phy"; + }; }; }; diff --git a/dts/src/arm64/hisilicon/hi6220-hikey.dts b/dts/src/arm64/hisilicon/hi6220-hikey.dts index c14205cd6b..533ed52388 100644 --- a/dts/src/arm64/hisilicon/hi6220-hikey.dts +++ b/dts/src/arm64/hisilicon/hi6220-hikey.dts @@ -122,222 +122,6 @@ power-off-delay-us = <10>; }; - soc { - spi0: spi@f7106000 { - status = "ok"; - }; - - i2c0: i2c@f7100000 { - status = "ok"; - }; - - i2c1: i2c@f7101000 { - status = "ok"; - }; - - uart1: uart@f7111000 { - assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>; - assigned-clock-rates = <150000000>; - status = "ok"; - - bluetooth { - compatible = "ti,wl1835-st"; - enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - clocks = <&pmic>; - clock-names = "ext_clock"; - }; - }; - - uart2: uart@f7112000 { - status = "ok"; - }; - - uart3: uart@f7113000 { - status = "ok"; - }; - - /* - * Legend: proper name = the GPIO line is used as GPIO - * NC = not connected (not routed from the SoC) - * "[PER]" = pin is muxed for peripheral (not GPIO) - * "" = no idea, schematic doesn't say, could be - * unrouted (not connected to any external pin) - * LSEC = Low Speed External Connector - * HSEC = High Speed External Connector - * - * Pin assignments taken from LeMaker and CircuitCo Schematics - * Rev A1. - * - * For the lines routed to the external connectors the - * lines are named after the 96Boards CE Specification 1.0, - * Appendix "Expansion Connector Signal Description". - * - * When the 96Board naming of a line and the schematic name of - * the same line are in conflict, the 96Board specification - * takes precedence, which means that the external UART on the - * LSEC is named UART0 while the schematic and SoC names this - * UART2. This is only for the informational lines i.e. "[FOO]", - * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only - * ones actually used for GPIO. - */ - gpio0: gpio@f8011000 { - gpio-line-names = "PWR_HOLD", "DSI_SEL", - "USB_HUB_RESET_N", "USB_SEL", "HDMI_PD", "WL_REG_ON", - "PWRON_DET", "5V_HUB_EN"; - }; - - gpio1: gpio@f8012000 { - gpio-line-names = "SD_DET", "HDMI_INT", "PMU_IRQ_N", - "WL_HOST_WAKE", "NC", "NC", "NC", "BT_REG_ON"; - }; - - gpio2: gpio@f8013000 { - gpio-line-names = - "GPIO-A", /* LSEC Pin 23: GPIO2_0 */ - "GPIO-B", /* LSEC Pin 24: GPIO2_1 */ - "GPIO-C", /* LSEC Pin 25: GPIO2_2 */ - "GPIO-D", /* LSEC Pin 26: GPIO2_3 */ - "GPIO-E", /* LSEC Pin 27: GPIO2_4 */ - "USB_ID_DET", "USB_VBUS_DET", - "GPIO-H"; /* LSEC Pin 30: GPIO2_7 */ - }; - - gpio3: gpio@f8014000 { - gpio-line-names = "GPIO3_0", "NC", "NC", "", "NC", "", - "WLAN_ACTIVE", "NC", "NC"; - }; - - gpio4: gpio@f7020000 { - gpio-line-names = "USER_LED1", "USER_LED2", "USER_LED3", - "USER_LED4", "SD_SEL", "NC", "NC", "BT_ACTIVE"; - }; - - gpio5: gpio@f7021000 { - gpio-line-names = "NC", "NC", - "[UART1_RxD]", /* LSEC Pin 11: UART3_RX */ - "[UART1_TxD]", /* LSEC Pin 13: UART3_TX */ - "[AUX_SSI1]", "NC", - "[PCM_CLK]", /* LSEC Pin 18: MODEM_PCM_XCLK */ - "[PCM_FS]"; /* LSEC Pin 16: MODEM_PCM_XFS */ - }; - - gpio6: gpio@f7022000 { - gpio-line-names = - "[SPI0_DIN]", /* Pin 10: SPI0_DI */ - "[SPI0_DOUT]", /* Pin 14: SPI0_DO */ - "[SPI0_CS]", /* Pin 12: SPI0_CS_N */ - "[SPI0_SCLK]", /* Pin 8: SPI0_SCLK */ - "NC", "NC", "NC", - "GPIO-G"; /* Pin 29: GPIO6_7_DSI_TE0 */ - }; - - gpio7: gpio@f7023000 { - gpio-line-names = "NC", "NC", "NC", "NC", - "[PCM_DI]", /* Pin 22: MODEM_PCM_DI */ - "[PCM_DO]", /* Pin 20: MODEM_PCM_DO */ - "NC", "NC"; - }; - - gpio8: gpio@f7024000 { - gpio-line-names = "NC", "[CEC_CLK_19_2MHZ]", "NC", - "", "", "", "", "", ""; - }; - - gpio9: gpio@f7025000 { - gpio-line-names = "", - "GPIO-J", /* LSEC Pin 32: ISP_PWDN0_GPIO9_1 */ - "GPIO-L", /* LSEC Pin 34: ISP_PWDN1_GPIO9_2 */ - "NC", "NC", "NC", "NC", "[ISP_CCLK0]"; - }; - - gpio10: gpio@f7026000 { - gpio-line-names = "BOOT_SEL", - "[ISP_CCLK1]", - "GPIO-I", /* LSEC Pin 31: ISP_RSTB0_GPIO10_2 */ - "GPIO-K", /* LSEC Pin 33: ISP_RSTB1_GPIO10_3 */ - "NC", "NC", - "[I2C2_SDA]", /* HSEC Pin 34: ISP0_SDA */ - "[I2C2_SCL]"; /* HSEC Pin 32: ISP0_SCL */ - }; - - gpio11: gpio@f7027000 { - gpio-line-names = - "[I2C3_SDA]", /* HSEC Pin 38: ISP1_SDA */ - "[I2C3_SCL]", /* HSEC Pin 36: ISP1_SCL */ - "", "NC", "NC", "NC", "", ""; - }; - - gpio12: gpio@f7028000 { - gpio-line-names = "[BT_PCM_XFS]", "[BT_PCM_DI]", - "[BT_PCM_DO]", - "NC", "NC", "NC", "NC", - "GPIO-F"; /* LSEC Pin 28: BL_PWM_GPIO12_7 */ - }; - - gpio13: gpio@f7029000 { - gpio-line-names = "[UART0_RX]", "[UART0_TX]", - "[BT_UART1_CTS]", "[BT_UART1_RTS]", - "[BT_UART1_RX]", "[BT_UART1_TX]", - "[UART0_CTS]", /* LSEC Pin 3: UART2_CTS_N */ - "[UART0_RTS]"; /* LSEC Pin 9: UART2_RTS_N */ - }; - - gpio14: gpio@f702a000 { - gpio-line-names = - "[UART0_RxD]", /* LSEC Pin 7: UART2_RX */ - "[UART0_TxD]", /* LSEC Pin 5: UART2_TX */ - "[I2C0_SCL]", /* LSEC Pin 15: I2C0_SCL */ - "[I2C0_SDA]", /* LSEC Pin 17: I2C0_SDA */ - "[I2C1_SCL]", /* LSEC Pin 19: I2C1_SCL */ - "[I2C1_SDA]", /* LSEC Pin 21: I2C1_SDA */ - "[I2C2_SCL]", "[I2C2_SDA]"; - }; - - gpio15: gpio@f702b000 { - gpio-line-names = "", "", "", "", "", "", "NC", ""; - }; - - /* GPIO blocks 16 thru 19 do not appear to be routed to pins */ - - dwmmc_0: dwmmc0@f723d000 { - cap-mmc-highspeed; - non-removable; - bus-width = <0x8>; - vmmc-supply = <&ldo19>; - }; - - dwmmc_1: dwmmc1@f723e000 { - card-detect-delay = <200>; - cap-sd-highspeed; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - vqmmc-supply = <&ldo7>; - vmmc-supply = <&ldo10>; - bus-width = <0x4>; - disable-wp; - cd-gpios = <&gpio1 0 1>; - }; - - dwmmc_2: dwmmc2@f723f000 { - bus-width = <0x4>; - non-removable; - cap-power-off-card; - vmmc-supply = <®_vdd_3v3>; - mmc-pwrseq = <&wl1835_pwrseq>; - - #address-cells = <0x1>; - #size-cells = <0x0>; - wlcore: wlcore@2 { - compatible = "ti,wl1835"; - reg = <2>; /* sdio func num */ - /* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */ - interrupt-parent = <&gpio1>; - interrupts = <3 IRQ_TYPE_EDGE_RISING>; - }; - }; - }; - leds { compatible = "gpio-leds"; @@ -480,10 +264,26 @@ }; }; +&uart1 { + assigned-clocks = <&sys_ctrl HI6220_UART1_SRC>; + assigned-clock-rates = <150000000>; + status = "ok"; + + bluetooth { + compatible = "ti,wl1835-st"; + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + clocks = <&pmic>; + clock-names = "ext_clock"; + }; +}; + &uart2 { + status = "ok"; label = "LS-UART0"; }; + &uart3 { + status = "ok"; label = "LS-UART1"; }; @@ -506,6 +306,196 @@ }; }; +&dwmmc_0 { + cap-mmc-highspeed; + non-removable; + bus-width = <0x8>; + vmmc-supply = <&ldo19>; +}; + +&dwmmc_1 { + card-detect-delay = <200>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + vqmmc-supply = <&ldo7>; + vmmc-supply = <&ldo10>; + bus-width = <0x4>; + disable-wp; + cd-gpios = <&gpio1 0 1>; +}; + +&dwmmc_2 { + bus-width = <0x4>; + non-removable; + cap-power-off-card; + vmmc-supply = <®_vdd_3v3>; + mmc-pwrseq = <&wl1835_pwrseq>; + + #address-cells = <0x1>; + #size-cells = <0x0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; /* sdio func num */ + /* WL_IRQ, WL_HOST_WAKE_GPIO1_3 */ + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + }; +}; + +/* + * Legend: proper name = the GPIO line is used as GPIO + * NC = not connected (not routed from the SoC) + * "[PER]" = pin is muxed for peripheral (not GPIO) + * "" = no idea, schematic doesn't say, could be + * unrouted (not connected to any external pin) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Pin assignments taken from LeMaker and CircuitCo Schematics + * Rev A1. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART2. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ +&gpio0 { + gpio-line-names = "PWR_HOLD", "DSI_SEL", + "USB_HUB_RESET_N", "USB_SEL", "HDMI_PD", "WL_REG_ON", + "PWRON_DET", "5V_HUB_EN"; +}; + +&gpio1 { + gpio-line-names = "SD_DET", "HDMI_INT", "PMU_IRQ_N", + "WL_HOST_WAKE", "NC", "NC", "NC", "BT_REG_ON"; +}; + +&gpio2 { + gpio-line-names = + "GPIO-A", /* LSEC Pin 23: GPIO2_0 */ + "GPIO-B", /* LSEC Pin 24: GPIO2_1 */ + "GPIO-C", /* LSEC Pin 25: GPIO2_2 */ + "GPIO-D", /* LSEC Pin 26: GPIO2_3 */ + "GPIO-E", /* LSEC Pin 27: GPIO2_4 */ + "USB_ID_DET", "USB_VBUS_DET", + "GPIO-H"; /* LSEC Pin 30: GPIO2_7 */ +}; + +&gpio3 { + gpio-line-names = "GPIO3_0", "NC", "NC", "", "NC", "", + "WLAN_ACTIVE", "NC", "NC"; +}; + +&gpio4 { + gpio-line-names = "USER_LED1", "USER_LED2", "USER_LED3", + "USER_LED4", "SD_SEL", "NC", "NC", "BT_ACTIVE"; +}; + +&gpio5 { + gpio-line-names = "NC", "NC", + "[UART1_RxD]", /* LSEC Pin 11: UART3_RX */ + "[UART1_TxD]", /* LSEC Pin 13: UART3_TX */ + "[AUX_SSI1]", "NC", + "[PCM_CLK]", /* LSEC Pin 18: MODEM_PCM_XCLK */ + "[PCM_FS]"; /* LSEC Pin 16: MODEM_PCM_XFS */ +}; + +&gpio6 { + gpio-line-names = + "[SPI0_DIN]", /* Pin 10: SPI0_DI */ + "[SPI0_DOUT]", /* Pin 14: SPI0_DO */ + "[SPI0_CS]", /* Pin 12: SPI0_CS_N */ + "[SPI0_SCLK]", /* Pin 8: SPI0_SCLK */ + "NC", "NC", "NC", + "GPIO-G"; /* Pin 29: GPIO6_7_DSI_TE0 */ +}; + +&gpio7 { + gpio-line-names = "NC", "NC", "NC", "NC", + "[PCM_DI]", /* Pin 22: MODEM_PCM_DI */ + "[PCM_DO]", /* Pin 20: MODEM_PCM_DO */ + "NC", "NC"; +}; + +&gpio8 { + gpio-line-names = "NC", "[CEC_CLK_19_2MHZ]", "NC", + "", "", "", "", "", ""; +}; + +&gpio9 { + gpio-line-names = "", + "GPIO-J", /* LSEC Pin 32: ISP_PWDN0_GPIO9_1 */ + "GPIO-L", /* LSEC Pin 34: ISP_PWDN1_GPIO9_2 */ + "NC", "NC", "NC", "NC", "[ISP_CCLK0]"; +}; + +&gpio10 { + gpio-line-names = "BOOT_SEL", + "[ISP_CCLK1]", + "GPIO-I", /* LSEC Pin 31: ISP_RSTB0_GPIO10_2 */ + "GPIO-K", /* LSEC Pin 33: ISP_RSTB1_GPIO10_3 */ + "NC", "NC", + "[I2C2_SDA]", /* HSEC Pin 34: ISP0_SDA */ + "[I2C2_SCL]"; /* HSEC Pin 32: ISP0_SCL */ +}; + +&gpio11 { + gpio-line-names = + "[I2C3_SDA]", /* HSEC Pin 38: ISP1_SDA */ + "[I2C3_SCL]", /* HSEC Pin 36: ISP1_SCL */ + "", "NC", "NC", "NC", "", ""; +}; + +&gpio12 { + gpio-line-names = "[BT_PCM_XFS]", "[BT_PCM_DI]", + "[BT_PCM_DO]", + "NC", "NC", "NC", "NC", + "GPIO-F"; /* LSEC Pin 28: BL_PWM_GPIO12_7 */ +}; + +&gpio13 { + gpio-line-names = "[UART0_RX]", "[UART0_TX]", + "[BT_UART1_CTS]", "[BT_UART1_RTS]", + "[BT_UART1_RX]", "[BT_UART1_TX]", + "[UART0_CTS]", /* LSEC Pin 3: UART2_CTS_N */ + "[UART0_RTS]"; /* LSEC Pin 9: UART2_RTS_N */ +}; + +&gpio14 { + gpio-line-names = + "[UART0_RxD]", /* LSEC Pin 7: UART2_RX */ + "[UART0_TxD]", /* LSEC Pin 5: UART2_TX */ + "[I2C0_SCL]", /* LSEC Pin 15: I2C0_SCL */ + "[I2C0_SDA]", /* LSEC Pin 17: I2C0_SDA */ + "[I2C1_SCL]", /* LSEC Pin 19: I2C1_SCL */ + "[I2C1_SDA]", /* LSEC Pin 21: I2C1_SDA */ + "[I2C2_SCL]", "[I2C2_SDA]"; +}; + +&gpio15 { + gpio-line-names = "", "", "", "", "", "", "NC", ""; +}; + +/* GPIO blocks 16 thru 19 do not appear to be routed to pins */ + + +&i2c0 { + status = "ok"; +}; + +&i2c1 { + status = "ok"; +}; + &i2c2 { #address-cells = <1>; #size-cells = <0>; @@ -516,7 +506,7 @@ reg = <0x39>; interrupt-parent = <&gpio1>; interrupts = <1 2>; - pd-gpio = <&gpio0 4 0>; + pd-gpios = <&gpio0 4 0>; adi,dsi-lanes = <4>; #sound-dai-cells = <0>; @@ -549,3 +539,7 @@ }; }; }; + +&spi0 { + status = "ok"; +}; diff --git a/dts/src/arm64/hisilicon/hi6220.dtsi b/dts/src/arm64/hisilicon/hi6220.dtsi index 2072b637b5..3d189d9f0d 100644 --- a/dts/src/arm64/hisilicon/hi6220.dtsi +++ b/dts/src/arm64/hisilicon/hi6220.dtsi @@ -302,7 +302,7 @@ mboxes = <&mailbox 1 0 11>; }; - uart0: uart@f8015000 { /* console */ + uart0: serial@f8015000 { /* console */ compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xf8015000 0x0 0x1000>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; @@ -311,7 +311,7 @@ clock-names = "uartclk", "apb_pclk"; }; - uart1: uart@f7111000 { + uart1: serial@f7111000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xf7111000 0x0 0x1000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; @@ -325,7 +325,7 @@ status = "disabled"; }; - uart2: uart@f7112000 { + uart2: serial@f7112000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xf7112000 0x0 0x1000>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; @@ -337,7 +337,7 @@ status = "disabled"; }; - uart3: uart@f7113000 { + uart3: serial@f7113000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xf7113000 0x0 0x1000>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; @@ -349,7 +349,7 @@ status = "disabled"; }; - uart4: uart@f7114000 { + uart4: serial@f7114000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xf7114000 0x0 0x1000>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/intel/keembay-evm.dts b/dts/src/arm64/intel/keembay-evm.dts new file mode 100644 index 0000000000..466c85363a --- /dev/null +++ b/dts/src/arm64/intel/keembay-evm.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) +/* + * Copyright (C) 2020, Intel Corporation + * + * Device tree describing Keem Bay EVM board. + */ + +/dts-v1/; + +#include "keembay-soc.dtsi" + +/ { + model = "Keem Bay EVM"; + compatible = "intel,keembay-evm", "intel,keembay"; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@80000000 { + device_type = "memory"; + /* 2GB of DDR memory. */ + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + +}; + +&uart3 { + status = "okay"; +}; diff --git a/dts/src/arm64/intel/keembay-soc.dtsi b/dts/src/arm64/intel/keembay-soc.dtsi new file mode 100644 index 0000000000..781761d294 --- /dev/null +++ b/dts/src/arm64/intel/keembay-soc.dtsi @@ -0,0 +1,123 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) +/* + * Copyright (C) 2020, Intel Corporation. + * + * Device tree describing Keem Bay SoC. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0>; + enable-method = "psci"; + }; + + cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x1>; + enable-method = "psci"; + }; + + cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x2>; + enable-method = "psci"; + }; + + cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x3>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + gic: interrupt-controller@20500000 { + compatible = "arm,gic-v3"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0 0x20500000 0x0 0x20000>, /* GICD */ + <0x0 0x20580000 0x0 0x80000>; /* GICR */ + /* VGIC maintenance interrupt */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer { + compatible = "arm,armv8-timer"; + /* Secure, non-secure, virtual, and hypervisor */ + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 0x7 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + uart0: serial@20150000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x20150000 0x0 0x100>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial@20160000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x20160000 0x0 0x100>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart2: serial@20170000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x20170000 0x0 0x100>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart3: serial@20180000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x20180000 0x0 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm64/intel/socfpga_agilex.dtsi b/dts/src/arm64/intel/socfpga_agilex.dtsi index f52de8f780..9d7f19e97d 100644 --- a/dts/src/arm64/intel/socfpga_agilex.dtsi +++ b/dts/src/arm64/intel/socfpga_agilex.dtsi @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/reset/altr,rst-mgr-s10.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/agilex-clock.h> / { compatible = "intel,socfpga-agilex"; @@ -101,6 +102,40 @@ fpga-mgr = <&fpga_mgr>; }; + clkmgr: clock-controller@ffd10000 { + compatible = "intel,agilex-clkmgr"; + reg = <0xffd10000 0x1000>; + #clock-cells = <1>; + }; + + clocks { + cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + cb_intosc_ls_clk: cb-intosc-ls-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + f2s_free_clk: f2s-free-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + osc1: osc1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + qspi_clk: qspi-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + }; + }; + gmac0: ethernet@ff800000 { compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff800000 0x2000>; @@ -114,6 +149,8 @@ snps,multicast-filter-bins = <256>; iommus = <&smmu 1>; altr,sysmgr-syscon = <&sysmgr 0x44 0>; + clocks = <&clkmgr AGILEX_EMAC0_CLK>; + clock-names = "stmmaceth"; status = "disabled"; }; @@ -130,6 +167,8 @@ snps,multicast-filter-bins = <256>; iommus = <&smmu 2>; altr,sysmgr-syscon = <&sysmgr 0x48 8>; + clocks = <&clkmgr AGILEX_EMAC1_CLK>; + clock-names = "stmmaceth"; status = "disabled"; }; @@ -146,6 +185,8 @@ snps,multicast-filter-bins = <256>; iommus = <&smmu 3>; altr,sysmgr-syscon = <&sysmgr 0x4c 16>; + clocks = <&clkmgr AGILEX_EMAC2_CLK>; + clock-names = "stmmaceth"; status = "disabled"; }; @@ -196,6 +237,7 @@ reg = <0xffc02800 0x100>; interrupts = <0 103 4>; resets = <&rst I2C0_RESET>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; }; @@ -206,6 +248,7 @@ reg = <0xffc02900 0x100>; interrupts = <0 104 4>; resets = <&rst I2C1_RESET>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; }; @@ -216,6 +259,7 @@ reg = <0xffc02a00 0x100>; interrupts = <0 105 4>; resets = <&rst I2C2_RESET>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; }; @@ -226,6 +270,7 @@ reg = <0xffc02b00 0x100>; interrupts = <0 106 4>; resets = <&rst I2C3_RESET>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; }; @@ -236,6 +281,7 @@ reg = <0xffc02c00 0x100>; interrupts = <0 107 4>; resets = <&rst I2C4_RESET>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; }; @@ -248,6 +294,9 @@ fifo-depth = <0x400>; resets = <&rst SDMMC_RESET>; reset-names = "reset"; + clocks = <&clkmgr AGILEX_L4_MP_CLK>, + <&clkmgr AGILEX_SDMMC_CLK>; + clock-names = "biu", "ciu"; iommus = <&smmu 5>; status = "disabled"; }; @@ -260,6 +309,10 @@ <0xffb80000 0x1000>; reg-names = "nand_data", "denali_reg"; interrupts = <0 97 4>; + clocks = <&clkmgr AGILEX_NAND_CLK>, + <&clkmgr AGILEX_NAND_X_CLK>, + <&clkmgr AGILEX_NAND_ECC_CLK>; + clock-names = "nand", "nand_x", "ecc"; resets = <&rst NAND_RESET>, <&rst NAND_OCP_RESET>; status = "disabled"; }; @@ -286,6 +339,8 @@ #dma-requests = <32>; resets = <&rst DMA_RESET>, <&rst DMA_OCP_RESET>; reset-names = "dma", "dma-ocp"; + clocks = <&clkmgr AGILEX_L4_MAIN_CLK>; + clock-names = "apb_pclk"; }; rst: rstmgr@ffd11000 { @@ -312,6 +367,9 @@ <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>, <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>; stream-match-mask = <0x7ff0>; + clocks = <&clkmgr AGILEX_MPU_CCU_CLK>, + <&clkmgr AGILEX_L3_MAIN_FREE_CLK>, + <&clkmgr AGILEX_L4_MAIN_CLK>; status = "disabled"; }; @@ -322,8 +380,10 @@ reg = <0xffda4000 0x1000>; interrupts = <0 99 4>; resets = <&rst SPIM0_RESET>; + reset-names = "spi"; reg-io-width = <4>; num-cs = <4>; + clocks = <&clkmgr AGILEX_L4_MAIN_CLK>; status = "disabled"; }; @@ -334,8 +394,10 @@ reg = <0xffda5000 0x1000>; interrupts = <0 100 4>; resets = <&rst SPIM1_RESET>; + reset-names = "spi"; reg-io-width = <4>; num-cs = <4>; + clocks = <&clkmgr AGILEX_L4_MAIN_CLK>; status = "disabled"; }; @@ -357,24 +419,32 @@ compatible = "snps,dw-apb-timer"; interrupts = <0 113 4>; reg = <0xffc03000 0x100>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; + clock-names = "timer"; }; timer1: timer1@ffc03100 { compatible = "snps,dw-apb-timer"; interrupts = <0 114 4>; reg = <0xffc03100 0x100>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; + clock-names = "timer"; }; timer2: timer2@ffd00000 { compatible = "snps,dw-apb-timer"; interrupts = <0 115 4>; reg = <0xffd00000 0x100>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; + clock-names = "timer"; }; timer3: timer3@ffd00100 { compatible = "snps,dw-apb-timer"; interrupts = <0 116 4>; reg = <0xffd00100 0x100>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; + clock-names = "timer"; }; uart0: serial0@ffc02000 { @@ -385,6 +455,7 @@ reg-io-width = <4>; resets = <&rst UART0_RESET>; status = "disabled"; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; }; uart1: serial1@ffc02100 { @@ -394,6 +465,7 @@ reg-shift = <2>; reg-io-width = <4>; resets = <&rst UART1_RESET>; + clocks = <&clkmgr AGILEX_L4_SP_CLK>; status = "disabled"; }; @@ -411,6 +483,7 @@ phy-names = "usb2-phy"; resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; + clocks = <&clkmgr AGILEX_USB_CLK>; iommus = <&smmu 6>; status = "disabled"; }; @@ -424,6 +497,7 @@ resets = <&rst USB1_RESET>, <&rst USB1_OCP_RESET>; reset-names = "dwc2", "dwc2-ecc"; iommus = <&smmu 7>; + clocks = <&clkmgr AGILEX_USB_CLK>; status = "disabled"; }; @@ -432,6 +506,7 @@ reg = <0xffd00200 0x100>; interrupts = <0 117 4>; resets = <&rst WATCHDOG0_RESET>; + clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -440,6 +515,7 @@ reg = <0xffd00300 0x100>; interrupts = <0 118 4>; resets = <&rst WATCHDOG1_RESET>; + clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -448,6 +524,7 @@ reg = <0xffd00400 0x100>; interrupts = <0 125 4>; resets = <&rst WATCHDOG2_RESET>; + clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -456,6 +533,7 @@ reg = <0xffd00500 0x100>; interrupts = <0 126 4>; resets = <&rst WATCHDOG3_RESET>; + clocks = <&clkmgr AGILEX_L4_SYS_FREE_CLK>; status = "disabled"; }; @@ -533,6 +611,7 @@ cdns,fifo-depth = <128>; cdns,fifo-width = <4>; cdns,trigger-address = <0x00000000>; + clocks = <&qspi_clk>; status = "disabled"; }; diff --git a/dts/src/arm64/intel/socfpga_agilex_socdk.dts b/dts/src/arm64/intel/socfpga_agilex_socdk.dts index 92f478def7..96c50d4828 100644 --- a/dts/src/arm64/intel/socfpga_agilex_socdk.dts +++ b/dts/src/arm64/intel/socfpga_agilex_socdk.dts @@ -41,6 +41,14 @@ /* We expect the bootloader to fill in the reg */ reg = <0 0 0 0>; }; + + soc { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + }; }; &gpio1 { diff --git a/dts/src/arm64/marvell/armada-7040.dtsi b/dts/src/arm64/marvell/armada-7040.dtsi index 4724721577..7a3198cd7a 100644 --- a/dts/src/arm64/marvell/armada-7040.dtsi +++ b/dts/src/arm64/marvell/armada-7040.dtsi @@ -14,3 +14,31 @@ compatible = "marvell,armada7040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; }; + +&smmu { + status = "okay"; +}; + +&cp0_pcie0 { + iommu-map = + <0x0 &smmu 0x480 0x20>, + <0x100 &smmu 0x4a0 0x20>, + <0x200 &smmu 0x4c0 0x20>; + iommu-map-mask = <0x031f>; +}; + +&cp0_sata0 { + iommus = <&smmu 0x444>; +}; + +&cp0_sdhci0 { + iommus = <&smmu 0x445>; +}; + +&cp0_usb3_0 { + iommus = <&smmu 0x440>; +}; + +&cp0_usb3_1 { + iommus = <&smmu 0x441>; +}; diff --git a/dts/src/arm64/marvell/armada-8040.dtsi b/dts/src/arm64/marvell/armada-8040.dtsi index 7699b19224..79e8ce59ba 100644 --- a/dts/src/arm64/marvell/armada-8040.dtsi +++ b/dts/src/arm64/marvell/armada-8040.dtsi @@ -15,6 +15,18 @@ "marvell,armada-ap806"; }; +&smmu { + status = "okay"; +}; + +&cp0_pcie0 { + iommu-map = + <0x0 &smmu 0x480 0x20>, + <0x100 &smmu 0x4a0 0x20>, + <0x200 &smmu 0x4c0 0x20>; + iommu-map-mask = <0x031f>; +}; + /* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock * in CP master is not connected (by package) to the oscillator. So * disable it. However, the RTC clock in CP slave is connected to the @@ -23,3 +35,31 @@ &cp0_rtc { status = "disabled"; }; + +&cp0_sata0 { + iommus = <&smmu 0x444>; +}; + +&cp0_sdhci0 { + iommus = <&smmu 0x445>; +}; + +&cp0_usb3_0 { + iommus = <&smmu 0x440>; +}; + +&cp0_usb3_1 { + iommus = <&smmu 0x441>; +}; + +&cp1_sata0 { + iommus = <&smmu 0x454>; +}; + +&cp1_usb3_0 { + iommus = <&smmu 0x450>; +}; + +&cp1_usb3_1 { + iommus = <&smmu 0x451>; +}; diff --git a/dts/src/arm64/marvell/armada-ap80x.dtsi b/dts/src/arm64/marvell/armada-ap80x.dtsi index 7f9b9a6477..12e477f1ae 100644 --- a/dts/src/arm64/marvell/armada-ap80x.dtsi +++ b/dts/src/arm64/marvell/armada-ap80x.dtsi @@ -56,6 +56,24 @@ compatible = "simple-bus"; ranges = <0x0 0x0 0xf0000000 0x1000000>; + smmu: iommu@5000000 { + compatible = "marvell,ap806-smmu-500", "arm,mmu-500"; + reg = <0x100000 0x100000>; + dma-coherent; + #iommu-cells = <1>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + gic: interrupt-controller@210000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; diff --git a/dts/src/arm64/mediatek/mt6358.dtsi b/dts/src/arm64/mediatek/mt6358.dtsi index 9361ada0c4..fa159b2037 100644 --- a/dts/src/arm64/mediatek/mt6358.dtsi +++ b/dts/src/arm64/mediatek/mt6358.dtsi @@ -16,6 +16,8 @@ }; mt6358regulator: mt6358regulator { + compatible = "mediatek,mt6358-regulator"; + mt6358_vdram1_reg: buck_vdram1 { regulator-name = "vdram1"; regulator-min-microvolt = <500000>; diff --git a/dts/src/arm64/mediatek/mt8173.dtsi b/dts/src/arm64/mediatek/mt8173.dtsi index 70b1ffcab7..5e046f9d48 100644 --- a/dts/src/arm64/mediatek/mt8173.dtsi +++ b/dts/src/arm64/mediatek/mt8173.dtsi @@ -167,7 +167,7 @@ <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster0_opp>; - capacity-dmips-mhz = <526>; + capacity-dmips-mhz = <740>; }; cpu1: cpu@1 { @@ -182,7 +182,7 @@ <&apmixedsys CLK_APMIXED_MAINPLL>; clock-names = "cpu", "intermediate"; operating-points-v2 = <&cluster0_opp>; - capacity-dmips-mhz = <526>; + capacity-dmips-mhz = <740>; }; cpu2: cpu@100 { diff --git a/dts/src/arm64/mediatek/mt8183-evb.dts b/dts/src/arm64/mediatek/mt8183-evb.dts index afd6ddbcbd..ae405bd8f0 100644 --- a/dts/src/arm64/mediatek/mt8183-evb.dts +++ b/dts/src/arm64/mediatek/mt8183-evb.dts @@ -205,7 +205,7 @@ }; }; - mmc0_pins_uhs: mmc0@0{ + mmc0_pins_uhs: mmc0 { pins_cmd_dat { pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>, <PINMUX_GPIO128__FUNC_MSDC0_DAT1>, @@ -264,7 +264,7 @@ }; }; - mmc1_pins_uhs: mmc1@0{ + mmc1_pins_uhs: mmc1 { pins_cmd_dat { pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>, <PINMUX_GPIO32__FUNC_MSDC1_DAT0>, diff --git a/dts/src/arm64/mediatek/mt8183-kukui-krane-sku176.dts b/dts/src/arm64/mediatek/mt8183-kukui-krane-sku176.dts new file mode 100644 index 0000000000..47113e275c --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-kukui-krane-sku176.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2019 Google LLC + * + * Device-tree for Krane sku176. + * + * SKU is a 8-bit value (0xb0 == 176): + * - Bits 7..4: Panel ID: 0xb (BOE) + * - Bits 3..0: SKU ID: 0x0 (default) + */ + +/dts-v1/; +#include "mt8183-kukui-krane.dtsi" + +/ { + model = "MediaTek krane sku176 board"; + compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183"; +}; diff --git a/dts/src/arm64/mediatek/mt8183-kukui-krane.dtsi b/dts/src/arm64/mediatek/mt8183-kukui-krane.dtsi new file mode 100644 index 0000000000..fbc471ccf8 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-kukui-krane.dtsi @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2019 Google LLC + */ + +#include "mt8183-kukui.dtsi" + +/ { + ppvarn_lcd: ppvarn-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarn_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarn_lcd_en>; + + enable-active-high; + + gpio = <&pio 66 GPIO_ACTIVE_HIGH>; + }; + + ppvarp_lcd: ppvarp-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarp_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarp_lcd_en>; + + enable-active-high; + + gpio = <&pio 166 GPIO_ACTIVE_HIGH>; + }; + + pp1800_lcd: pp1800-lcd { + compatible = "regulator-fixed"; + regulator-name = "pp1800_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_lcd_en>; + + enable-active-high; + + gpio = <&pio 36 GPIO_ACTIVE_HIGH>; + }; +}; + +&bluetooth { + firmware-name = "nvm_00440302_i2s_eu.bin"; +}; + +&i2c0 { + status = "okay"; + + touchscreen4: touchscreen@5d { + compatible = "hid-over-i2c"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&open_touch>; + + interrupt-parent = <&pio>; + interrupts = <155 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + }; +}; + +&mt6358_vcama2_reg { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; + clock-frequency = <400000>; + + eeprom@58 { + compatible = "atmel,24c32"; + reg = <0x58>; + pagesize = <32>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + status = "okay"; + clock-frequency = <400000>; + + eeprom@54 { + compatible = "atmel,24c32"; + reg = <0x54>; + pagesize = <32>; + }; +}; + +&pio { + /* 192 lines */ + gpio-line-names = + "SPI_AP_EC_CS_L", + "SPI_AP_EC_MOSI", + "SPI_AP_EC_CLK", + "I2S3_DO", + "USB_PD_INT_ODL", + "", + "", + "", + "", + "IT6505_HPD_L", + "I2S3_TDM_D3", + "SOC_I2C6_1V8_SCL", + "SOC_I2C6_1V8_SDA", + "DPI_D0", + "DPI_D1", + "DPI_D2", + "DPI_D3", + "DPI_D4", + "DPI_D5", + "DPI_D6", + "DPI_D7", + "DPI_D8", + "DPI_D9", + "DPI_D10", + "DPI_D11", + "DPI_HSYNC", + "DPI_VSYNC", + "DPI_DE", + "DPI_CK", + "AP_MSDC1_CLK", + "AP_MSDC1_DAT3", + "AP_MSDC1_CMD", + "AP_MSDC1_DAT0", + "AP_MSDC1_DAT2", + "AP_MSDC1_DAT1", + "", + "", + "", + "", + "", + "", + "OTG_EN", + "DRVBUS", + "DISP_PWM", + "DSI_TE", + "LCM_RST_1V8", + "AP_CTS_WIFI_RTS", + "AP_RTS_WIFI_CTS", + "SOC_I2C5_1V8_SCL", + "SOC_I2C5_1V8_SDA", + "SOC_I2C3_1V8_SCL", + "SOC_I2C3_1V8_SDA", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SOC_I2C1_1V8_SDA", + "SOC_I2C0_1V8_SDA", + "SOC_I2C0_1V8_SCL", + "SOC_I2C1_1V8_SCL", + "AP_SPI_H1_MISO", + "AP_SPI_H1_CS_L", + "AP_SPI_H1_MOSI", + "AP_SPI_H1_CLK", + "I2S5_BCK", + "I2S5_LRCK", + "I2S5_DO", + "BOOTBLOCK_EN_L", + "MT8183_KPCOL0", + "SPI_AP_EC_MISO", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "I2S2_MCK", + "I2S2_BCK", + "CLK_5M_WCAM", + "CLK_2M_UCAM", + "I2S2_LRCK", + "I2S2_DI", + "SOC_I2C2_1V8_SCL", + "SOC_I2C2_1V8_SDA", + "SOC_I2C4_1V8_SCL", + "SOC_I2C4_1V8_SDA", + "", + "SCL8", + "SDA8", + "FCAM_PWDN_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "", + "", + "", + "", + "", + "", + /* + * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics + * call it BIOS_FLASH_WP_R_L. + */ + "AP_FLASH_WP_L", + "EC_AP_INT_ODL", + "IT6505_INT_ODL", + "H1_INT_OD_L", + "", + "", + "", + "", + "", + "", + "", + "AP_SPI_FLASH_MISO", + "AP_SPI_FLASH_CS_L", + "AP_SPI_FLASH_MOSI", + "AP_SPI_FLASH_CLK", + "DA7219_IRQ", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; + + ppvarp_lcd_en: ppvarp-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO66__FUNC_GPIO66>; + output-low; + }; + }; + + ppvarn_lcd_en: ppvarn-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO166__FUNC_GPIO166>; + output-low; + }; + }; + + pp1800_lcd_en: pp1800-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO36__FUNC_GPIO36>; + output-low; + }; + }; + + open_touch: open_touch { + irq_pin { + pinmux = <PINMUX_GPIO155__FUNC_GPIO155>; + input-enable; + bias-pull-up; + }; + + rst_pin { + pinmux = <PINMUX_GPIO156__FUNC_GPIO156>; + + /* + * The pen driver doesn't currently support driving + * this reset line. By specifying output-high here + * we're relying on the fact that this pin has a default + * pulldown at boot (which makes sure the pen was in + * reset if it was powered) and then we set it high here + * to take it out of reset. Better would be if the pen + * driver could control this and we could remove + * "output-high" here. + */ + output-high; + }; + }; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "LE_Krane"; +}; diff --git a/dts/src/arm64/mediatek/mt8183-kukui.dtsi b/dts/src/arm64/mediatek/mt8183-kukui.dtsi new file mode 100644 index 0000000000..f0a070535b --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-kukui.dtsi @@ -0,0 +1,788 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Ben Ho <ben.ho@mediatek.com> + * Erin Lo <erin.lo@mediatek.com> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "mt8183.dtsi" +#include "mt6358.dtsi" + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + clk32k: oscillator1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "clk32k"; + }; + + it6505_pp18_reg: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "it6505_pp18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&pio 178 0>; + enable-active-high; + }; + + lcd_pp3300: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "lcd_pp3300"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + bl_pp5000: regulator2 { + compatible = "regulator-fixed"; + regulator-name = "bl_pp5000"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + mmc1_fixed_power: regulator3 { + compatible = "regulator-fixed"; + regulator-name = "mmc1_power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + mmc1_fixed_io: regulator4 { + compatible = "regulator-fixed"; + regulator-name = "mmc1_io"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pp1800_alw: regulator5 { + compatible = "regulator-fixed"; + regulator-name = "pp1800_alw"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pp3300_alw: regulator6 { + compatible = "regulator-fixed"; + regulator-name = "pp3300_alw"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + max98357a: codec0 { + compatible = "maxim,max98357a"; + sdmode-gpios = <&pio 175 0>; + }; + + btsco: codec1 { + compatible = "linux,bt-sco"; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pins_pwrseq>; + + /* Toggle WIFI_ENABLE to reset the chip. */ + reset-gpios = <&pio 119 1>; + }; + + wifi_wakeup: wifi-wakeup { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pins_wakeup>; + + wowlan { + label = "Wake on WiFi"; + gpios = <&pio 113 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + tboard_thermistor1: thermal-sensor1 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 0>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-5000) 4241 + 0 4063 + 5000 3856 + 10000 3621 + 15000 3364 + 20000 3091 + 25000 2810 + 30000 2526 + 35000 2247 + 40000 1982 + 45000 1734 + 50000 1507 + 55000 1305 + 60000 1122 + 65000 964 + 70000 827 + 75000 710 + 80000 606 + 85000 519 + 90000 445 + 95000 382 + 100000 330 + 105000 284 + 110000 245 + 115000 213 + 120000 183 + 125000 161>; + }; + + tboard_thermistor2: thermal-sensor2 { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&auxadc 1>; + io-channel-names = "sensor-channel"; + temperature-lookup-table = < (-5000) 4241 + 0 4063 + 5000 3856 + 10000 3621 + 15000 3364 + 20000 3091 + 25000 2810 + 30000 2526 + 35000 2247 + 40000 1982 + 45000 1734 + 50000 1507 + 55000 1305 + 60000 1122 + 65000 964 + 70000 827 + 75000 710 + 80000 606 + 85000 519 + 90000 445 + 95000 382 + 100000 330 + 105000 284 + 110000 245 + 115000 213 + 120000 183 + 125000 161>; + }; +}; + +&auxadc { + status = "okay"; +}; + +&cpu0 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu1 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu2 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu3 { + proc-supply = <&mt6358_vproc12_reg>; +}; + +&cpu4 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu5 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu6 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&cpu7 { + proc-supply = <&mt6358_vproc11_reg>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + clock-frequency = <400000>; + #address-cells = <1>; + #size-cells = <0>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; +}; + +&i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + status = "okay"; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + status = "okay"; + clock-frequency = <100000>; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x12814>; + vmmc-supply = <&mt6358_vemc_reg>; + vqmmc-supply = <&mt6358_vio18_reg>; + assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC50_0>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_CK>; + non-removable; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + vmmc-supply = <&mmc1_fixed_power>; + vqmmc-supply = <&mmc1_fixed_io>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + max-frequency = <200000000>; + drv-type = <2>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + keep-power-in-suspend; + enable-sdio-wakeup; + cap-sdio-irq; + non-removable; + no-mmc; + no-sd; + assigned-clocks = <&topckgen CLK_TOP_MUX_MSDC30_1>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + #address-cells = <1>; + #size-cells = <0>; + + qca_wifi: qca-wifi@1 { + compatible = "qcom,ath10k"; + reg = <1>; + }; +}; + +&mt6358_vdram2_reg { + regulator-always-on; +}; + +&mt6358codec { + Avdd-supply = <&mt6358_vaud28_reg>; +}; + +&mt6358_vsim1_reg { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +&mt6358_vsim2_reg { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; + +&pio { + bt_pins: bt-pins { + pins_bt_en { + pinmux = <PINMUX_GPIO120__FUNC_GPIO120>; + output-low; + }; + }; + + ec_ap_int_odl: ec_ap_int_odl { + pins1 { + pinmux = <PINMUX_GPIO151__FUNC_GPIO151>; + input-enable; + bias-pull-up; + }; + }; + + h1_int_od_l: h1_int_od_l { + pins1 { + pinmux = <PINMUX_GPIO153__FUNC_GPIO153>; + input-enable; + }; + }; + + i2c0_pins: i2c0 { + pins_bus { + pinmux = <PINMUX_GPIO82__FUNC_SDA0>, + <PINMUX_GPIO83__FUNC_SCL0>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c1_pins: i2c1 { + pins_bus { + pinmux = <PINMUX_GPIO81__FUNC_SDA1>, + <PINMUX_GPIO84__FUNC_SCL1>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c2_pins: i2c2 { + pins_bus { + pinmux = <PINMUX_GPIO103__FUNC_SCL2>, + <PINMUX_GPIO104__FUNC_SDA2>; + bias-disable; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c3_pins: i2c3 { + pins_bus { + pinmux = <PINMUX_GPIO50__FUNC_SCL3>, + <PINMUX_GPIO51__FUNC_SDA3>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c4_pins: i2c4 { + pins_bus { + pinmux = <PINMUX_GPIO105__FUNC_SCL4>, + <PINMUX_GPIO106__FUNC_SDA4>; + bias-disable; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c5_pins: i2c5 { + pins_bus { + pinmux = <PINMUX_GPIO48__FUNC_SCL5>, + <PINMUX_GPIO49__FUNC_SDA5>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <00>; + }; + }; + + i2c6_pins: i2c6 { + pins_bus { + pinmux = <PINMUX_GPIO11__FUNC_SCL6>, + <PINMUX_GPIO12__FUNC_SDA6>; + bias-disable; + }; + }; + + mmc0_pins_default: mmc0-pins-default { + pins_cmd_dat { + pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO128__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO132__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO126__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO129__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO127__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO130__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO122__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-up-adv = <01>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-down-adv = <10>; + }; + + pins_rst { + pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-down-adv = <01>; + }; + }; + + mmc0_pins_uhs: mmc0-pins-uhs { + pins_cmd_dat { + pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO128__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO132__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO126__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO129__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO127__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO130__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO122__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-up-adv = <01>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-down-adv = <10>; + }; + + pins_ds { + pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-down-adv = <10>; + }; + + pins_rst { + pinmux = <PINMUX_GPIO133__FUNC_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_14mA>; + mediatek,pull-up-adv = <01>; + }; + }; + + mmc1_pins_default: mmc1-pins-default { + pins_cmd_dat { + pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>, + <PINMUX_GPIO32__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO34__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO33__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO30__FUNC_MSDC1_DAT3>; + input-enable; + mediatek,pull-up-adv = <10>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>; + input-enable; + mediatek,pull-down-adv = <10>; + }; + }; + + mmc1_pins_uhs: mmc1-pins-uhs { + pins_cmd_dat { + pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>, + <PINMUX_GPIO32__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO34__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO33__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO30__FUNC_MSDC1_DAT3>; + drive-strength = <MTK_DRIVE_6mA>; + input-enable; + mediatek,pull-up-adv = <10>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + mediatek,pull-down-adv = <10>; + input-enable; + }; + }; + + spi0_pins: spi0 { + pins_spi{ + pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>, + <PINMUX_GPIO86__FUNC_GPIO86>, + <PINMUX_GPIO87__FUNC_SPI0_MO>, + <PINMUX_GPIO88__FUNC_SPI0_CLK>; + bias-disable; + }; + }; + + spi1_pins: spi1 { + pins_spi{ + pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>, + <PINMUX_GPIO162__FUNC_SPI1_A_CSB>, + <PINMUX_GPIO163__FUNC_SPI1_A_MO>, + <PINMUX_GPIO164__FUNC_SPI1_A_CLK>; + bias-disable; + }; + }; + + spi2_pins: spi2 { + pins_spi{ + pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>, + <PINMUX_GPIO1__FUNC_SPI2_MO>, + <PINMUX_GPIO2__FUNC_SPI2_CLK>; + bias-disable; + }; + pins_spi_mi { + pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>; + mediatek,pull-down-adv = <00>; + }; + }; + + spi3_pins: spi3 { + pins_spi{ + pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>, + <PINMUX_GPIO22__FUNC_SPI3_CSB>, + <PINMUX_GPIO23__FUNC_SPI3_MO>, + <PINMUX_GPIO24__FUNC_SPI3_CLK>; + bias-disable; + }; + }; + + spi4_pins: spi4 { + pins_spi{ + pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>, + <PINMUX_GPIO18__FUNC_SPI4_CSB>, + <PINMUX_GPIO19__FUNC_SPI4_MO>, + <PINMUX_GPIO20__FUNC_SPI4_CLK>; + bias-disable; + }; + }; + + spi5_pins: spi5 { + pins_spi{ + pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>, + <PINMUX_GPIO14__FUNC_SPI5_CSB>, + <PINMUX_GPIO15__FUNC_SPI5_MO>, + <PINMUX_GPIO16__FUNC_SPI5_CLK>; + bias-disable; + }; + }; + + uart0_pins_default: uart0-pins-default { + pins_rx { + pinmux = <PINMUX_GPIO95__FUNC_URXD0>; + input-enable; + bias-pull-up; + }; + pins_tx { + pinmux = <PINMUX_GPIO96__FUNC_UTXD0>; + }; + }; + + uart1_pins_default: uart1-pins-default { + pins_rx { + pinmux = <PINMUX_GPIO121__FUNC_URXD1>; + input-enable; + bias-pull-up; + }; + pins_tx { + pinmux = <PINMUX_GPIO115__FUNC_UTXD1>; + }; + pins_rts { + pinmux = <PINMUX_GPIO47__FUNC_URTS1>; + output-enable; + }; + pins_cts { + pinmux = <PINMUX_GPIO46__FUNC_UCTS1>; + input-enable; + }; + }; + + uart1_pins_sleep: uart1-pins-sleep { + pins_rx { + pinmux = <PINMUX_GPIO121__FUNC_GPIO121>; + input-enable; + bias-pull-up; + }; + pins_tx { + pinmux = <PINMUX_GPIO115__FUNC_UTXD1>; + }; + pins_rts { + pinmux = <PINMUX_GPIO47__FUNC_URTS1>; + output-enable; + }; + pins_cts { + pinmux = <PINMUX_GPIO46__FUNC_UCTS1>; + input-enable; + }; + }; + + wifi_pins_pwrseq: wifi-pins-pwrseq { + pins_wifi_enable { + pinmux = <PINMUX_GPIO119__FUNC_GPIO119>; + output-low; + }; + }; + + wifi_pins_wakeup: wifi-pins-wakeup { + pins_wifi_wakeup { + pinmux = <PINMUX_GPIO113__FUNC_GPIO113>; + input-enable; + }; + }; +}; + +&soc_data { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + mediatek,pad-select = <0>; + status = "okay"; + cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>; + + cr50@0 { + compatible = "google,cr50"; + reg = <0>; + spi-max-frequency = <1000000>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_int_od_l>; + interrupt-parent = <&pio>; + interrupts = <153 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + mediatek,pad-select = <0>; + status = "okay"; + + w25q64dw: spi-flash@0 { + compatible = "winbond,w25q64dw", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + }; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins>; + mediatek,pad-select = <0>; + status = "okay"; + + cros_ec: cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + spi-max-frequency = <3000000>; + interrupt-parent = <&pio>; + interrupts = <151 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_ap_int_odl>; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usbc_extcon: extcon0 { + compatible = "google,extcon-usbc-cros-ec"; + google,usb-port-id = <0>; + }; + }; +}; + +&spi3 { + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins>; + mediatek,pad-select = <0>; + status = "disabled"; +}; + +&spi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi4_pins>; + mediatek,pad-select = <0>; + status = "disabled"; +}; + +&spi5 { + pinctrl-names = "default"; + pinctrl-0 = <&spi5_pins>; + mediatek,pad-select = <0>; + status = "disabled"; +}; + +&ssusb { + dr_mode = "host"; + wakeup-source; + vusb33-supply = <&mt6358_vusb_reg>; + status = "okay"; +}; + +&u3phy { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_default>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart1_pins_default>; + pinctrl-1 = <&uart1_pins_sleep>; + status = "okay"; + interrupts-extended = <&sysirq GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>, + <&pio 121 IRQ_TYPE_EDGE_FALLING>; + + bluetooth: bluetooth { + pinctrl-names = "default"; + pinctrl-0 = <&bt_pins>; + status = "okay"; + compatible = "qcom,qca6174-bt"; + enable-gpios = <&pio 120 0>; + clocks = <&clk32k>; + firmware-name = "nvm_00440302_i2s.bin"; + }; +}; + +&usb_host { + #address-cells = <1>; + #size-cells = <0>; + vusb33-supply = <&mt6358_vusb_reg>; + status = "okay"; + + hub@1 { + compatible = "usb5e3,610"; + reg = <1>; + }; +}; + +#include <arm/cros-ec-keyboard.dtsi> +#include <arm/cros-ec-sbs.dtsi> diff --git a/dts/src/arm64/mediatek/mt8183.dtsi b/dts/src/arm64/mediatek/mt8183.dtsi index 1e03c849dc..102105871d 100644 --- a/dts/src/arm64/mediatek/mt8183.dtsi +++ b/dts/src/arm64/mediatek/mt8183.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/reset-controller/mt8183-resets.h> +#include <dt-bindings/phy/phy.h> #include "mt8183-pinfunc.h" / { @@ -168,7 +169,7 @@ min-residency-us = <800>; }; - CLUSTER_SLEEP0: cluster-sleep@0 { + CLUSTER_SLEEP0: cluster-sleep-0 { compatible = "arm,idle-state"; local-timer-stop; arm,psci-suspend-param = <0x01010001>; @@ -176,7 +177,7 @@ exit-latency-us = <400>; min-residency-us = <1000>; }; - CLUSTER_SLEEP1: cluster-sleep@1 { + CLUSTER_SLEEP1: cluster-sleep-1 { compatible = "arm,idle-state"; local-timer-stop; arm,psci-suspend-param = <0x01010001>; @@ -285,6 +286,12 @@ #reset-cells = <1>; }; + pericfg: syscon@10003000 { + compatible = "mediatek,mt8183-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + }; + pio: pinctrl@10005000 { compatible = "mediatek,mt8183-pinctrl"; reg = <0 0x10005000 0 0x1000>, @@ -642,6 +649,36 @@ status = "disabled"; }; + ssusb: usb@11201000 { + compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3"; + reg = <0 0x11201000 0 0x2e00>, + <0 0x11203e00 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>; + phys = <&u2port0 PHY_TYPE_USB2>, + <&u3port0 PHY_TYPE_USB3>; + clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>, + <&infracfg CLK_INFRA_USB>; + clock-names = "sys_ck", "ref_ck"; + mediatek,syscon-wakeup = <&pericfg 0x400 0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb_host: xhci@11200000 { + compatible = "mediatek,mt8183-xhci", + "mediatek,mtk-xhci"; + reg = <0 0x11200000 0 0x1000>; + reg-names = "mac"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_UNIPRO_SCK>, + <&infracfg CLK_INFRA_USB>; + clock-names = "sys_ck", "ref_ck"; + status = "disabled"; + }; + }; + audiosys: syscon@11220000 { compatible = "mediatek,mt8183-audiosys", "syscon"; reg = <0 0x11220000 0 0x1000>; @@ -678,6 +715,33 @@ reg = <0 0x11f10000 0 0x1000>; }; + u3phy: usb-phy@11f40000 { + compatible = "mediatek,mt8183-tphy", + "mediatek,generic-tphy-v2"; + #address-cells = <1>; + #phy-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x11f40000 0x1000>; + status = "okay"; + + u2port0: usb-phy@0 { + reg = <0x0 0x700>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + mediatek,discth = <15>; + status = "okay"; + }; + + u3port0: usb-phy@0700 { + reg = <0x0700 0x900>; + clocks = <&clk26m>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + mfgcfg: syscon@13000000 { compatible = "mediatek,mt8183-mfgcfg", "syscon"; reg = <0 0x13000000 0 0x1000>; diff --git a/dts/src/arm64/microchip/sparx5.dtsi b/dts/src/arm64/microchip/sparx5.dtsi new file mode 100644 index 0000000000..cf712e8061 --- /dev/null +++ b/dts/src/arm64/microchip/sparx5.dtsi @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "microchip,sparx5"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <1>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + }; + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + lcpll_clk: lcpll-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <2500000000>; + }; + + clks: clock-controller@61110000c { + compatible = "microchip,sparx5-dpll"; + #clock-cells = <1>; + clocks = <&lcpll_clk>; + reg = <0x6 0x1110000c 0x24>; + }; + + ahb_clk: ahb-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + }; + + sys_clk: sys-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <625000000>; + }; + + axi: axi@600000000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + + gic: interrupt-controller@600300000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + interrupt-controller; + reg = <0x6 0x00300000 0x10000>, /* GIC Dist */ + <0x6 0x00340000 0xc0000>, /* GICR */ + <0x6 0x00200000 0x2000>, /* GICC */ + <0x6 0x00210000 0x2000>, /* GICV */ + <0x6 0x00220000 0x2000>; /* GICH */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + uart0: serial@600100000 { + pinctrl-0 = <&uart_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x6 0x00100000 0x20>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + }; + + uart1: serial@600102000 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + compatible = "ns16550a"; + reg = <0x6 0x00102000 0x20>; + clocks = <&ahb_clk>; + reg-io-width = <4>; + reg-shift = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + + status = "disabled"; + }; + + timer1: timer@600105000 { + compatible = "snps,dw-apb-timer"; + reg = <0x6 0x00105000 0x1000>; + clocks = <&ahb_clk>; + clock-names = "timer"; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + gpio: pinctrl@6110101e0 { + compatible = "microchip,sparx5-pinctrl"; + reg = <0x6 0x110101e0 0x90>, <0x6 0x10508010 0x100>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 64>; + interrupt-controller; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + + uart_pins: uart-pins { + pins = "GPIO_10", "GPIO_11"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + pins = "GPIO_26", "GPIO_27"; + function = "uart2"; + }; + + i2c_pins: i2c-pins { + pins = "GPIO_14", "GPIO_15"; + function = "twi"; + }; + + i2c2_pins: i2c2-pins { + pins = "GPIO_28", "GPIO_29"; + function = "twi2"; + }; + }; + + i2c0: i2c@600101000 { + compatible = "snps,designware-i2c"; + status = "disabled"; + pinctrl-0 = <&i2c_pins>; + pinctrl-names = "default"; + reg = <0x6 0x00101000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + i2c-sda-hold-time-ns = <300>; + clock-frequency = <100000>; + clocks = <&ahb_clk>; + }; + + i2c1: i2c@600103000 { + compatible = "snps,designware-i2c"; + status = "disabled"; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + reg = <0x6 0x00103000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + i2c-sda-hold-time-ns = <300>; + clock-frequency = <100000>; + clocks = <&ahb_clk>; + }; + }; +}; diff --git a/dts/src/arm64/microchip/sparx5_pcb125.dts b/dts/src/arm64/microchip/sparx5_pcb125.dts new file mode 100644 index 0000000000..91ee5b6cfc --- /dev/null +++ b/dts/src/arm64/microchip/sparx5_pcb125.dts @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries. + */ + +/dts-v1/; +#include "sparx5_pcb_common.dtsi" + +/ { + model = "Sparx5 PCB125 Reference Board"; + compatible = "microchip,sparx5-pcb125", "microchip,sparx5"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x10000000>; + }; +}; + +&i2c1 { + status = "okay"; +}; diff --git a/dts/src/arm64/microchip/sparx5_pcb134.dts b/dts/src/arm64/microchip/sparx5_pcb134.dts new file mode 100644 index 0000000000..feee4e99ff --- /dev/null +++ b/dts/src/arm64/microchip/sparx5_pcb134.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries. + */ + +/dts-v1/; +#include "sparx5_pcb134_board.dtsi" + +/ { + model = "Sparx5 PCB134 Reference Board (NAND)"; + compatible = "microchip,sparx5-pcb134", "microchip,sparx5"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x10000000>; + }; +}; diff --git a/dts/src/arm64/microchip/sparx5_pcb134_board.dtsi b/dts/src/arm64/microchip/sparx5_pcb134_board.dtsi new file mode 100644 index 0000000000..18a535a043 --- /dev/null +++ b/dts/src/arm64/microchip/sparx5_pcb134_board.dtsi @@ -0,0 +1,252 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries. + */ + +/dts-v1/; +#include "sparx5_pcb_common.dtsi" + +/{ + aliases { + i2c0 = &i2c0; + i2c100 = &i2c100; + i2c101 = &i2c101; + i2c102 = &i2c102; + i2c103 = &i2c103; + i2c104 = &i2c104; + i2c105 = &i2c105; + i2c106 = &i2c106; + i2c107 = &i2c107; + i2c108 = &i2c108; + i2c109 = &i2c109; + i2c110 = &i2c110; + i2c111 = &i2c111; + i2c112 = &i2c112; + i2c113 = &i2c113; + i2c114 = &i2c114; + i2c115 = &i2c115; + i2c116 = &i2c116; + i2c117 = &i2c117; + i2c118 = &i2c118; + i2c119 = &i2c119; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +&gpio { + i2cmux_pins_i: i2cmux-pins-i { + pins = "GPIO_16", "GPIO_17", "GPIO_18", "GPIO_19", + "GPIO_20", "GPIO_22", "GPIO_36", "GPIO_35", + "GPIO_50", "GPIO_51", "GPIO_56", "GPIO_57"; + function = "twi_scl_m"; + output-low; + }; + i2cmux_0: i2cmux-0 { + pins = "GPIO_16"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_1: i2cmux-1 { + pins = "GPIO_17"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_2: i2cmux-2 { + pins = "GPIO_18"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_3: i2cmux-3 { + pins = "GPIO_19"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_4: i2cmux-4 { + pins = "GPIO_20"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_5: i2cmux-5 { + pins = "GPIO_22"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_6: i2cmux-6 { + pins = "GPIO_36"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_7: i2cmux-7 { + pins = "GPIO_35"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_8: i2cmux-8 { + pins = "GPIO_50"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_9: i2cmux-9 { + pins = "GPIO_51"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_10: i2cmux-10 { + pins = "GPIO_56"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_11: i2cmux-11 { + pins = "GPIO_57"; + function = "twi_scl_m"; + output-high; + }; +}; + +&axi { + i2c0_imux: i2c0-imux@0 { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + }; + i2c0_emux: i2c0-emux@0 { + compatible = "i2c-mux-gpio"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + }; +}; + +&i2c0_imux { + pinctrl-names = + "i2c100", "i2c101", "i2c102", "i2c103", + "i2c104", "i2c105", "i2c106", "i2c107", + "i2c108", "i2c109", "i2c110", "i2c111", "idle"; + pinctrl-0 = <&i2cmux_0>; + pinctrl-1 = <&i2cmux_1>; + pinctrl-2 = <&i2cmux_2>; + pinctrl-3 = <&i2cmux_3>; + pinctrl-4 = <&i2cmux_4>; + pinctrl-5 = <&i2cmux_5>; + pinctrl-6 = <&i2cmux_6>; + pinctrl-7 = <&i2cmux_7>; + pinctrl-8 = <&i2cmux_8>; + pinctrl-9 = <&i2cmux_9>; + pinctrl-10 = <&i2cmux_10>; + pinctrl-11 = <&i2cmux_11>; + pinctrl-12 = <&i2cmux_pins_i>; + i2c100: i2c_sfp1 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c101: i2c_sfp2 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c102: i2c_sfp3 { + reg = <0x2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c103: i2c_sfp4 { + reg = <0x3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c104: i2c_sfp5 { + reg = <0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c105: i2c_sfp6 { + reg = <0x5>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c106: i2c_sfp7 { + reg = <0x6>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c107: i2c_sfp8 { + reg = <0x7>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c108: i2c_sfp9 { + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c109: i2c_sfp10 { + reg = <0x9>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c110: i2c_sfp11 { + reg = <0xa>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c111: i2c_sfp12 { + reg = <0xb>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&i2c0_emux { + mux-gpios = <&gpio 55 GPIO_ACTIVE_HIGH + &gpio 60 GPIO_ACTIVE_HIGH + &gpio 61 GPIO_ACTIVE_HIGH + &gpio 54 GPIO_ACTIVE_HIGH>; + idle-state = <0x8>; + i2c112: i2c_sfp13 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c113: i2c_sfp14 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c114: i2c_sfp15 { + reg = <0x2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c115: i2c_sfp16 { + reg = <0x3>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c116: i2c_sfp17 { + reg = <0x4>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c117: i2c_sfp18 { + reg = <0x5>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c118: i2c_sfp19 { + reg = <0x6>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c119: i2c_sfp20 { + reg = <0x7>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/dts/src/arm64/microchip/sparx5_pcb134_emmc.dts b/dts/src/arm64/microchip/sparx5_pcb134_emmc.dts new file mode 100644 index 0000000000..10081a6696 --- /dev/null +++ b/dts/src/arm64/microchip/sparx5_pcb134_emmc.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries. + */ + +/dts-v1/; +#include "sparx5_pcb134_board.dtsi" + +/ { + model = "Sparx5 PCB134 Reference Board (eMMC enabled)"; + compatible = "microchip,sparx5-pcb134", "microchip,sparx5"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x10000000>; + }; +}; diff --git a/dts/src/arm64/microchip/sparx5_pcb135.dts b/dts/src/arm64/microchip/sparx5_pcb135.dts new file mode 100644 index 0000000000..20e409a9be --- /dev/null +++ b/dts/src/arm64/microchip/sparx5_pcb135.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries. + */ + +/dts-v1/; +#include "sparx5_pcb135_board.dtsi" + +/ { + model = "Sparx5 PCB135 Reference Board (NAND)"; + compatible = "microchip,sparx5-pcb135", "microchip,sparx5"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x10000000>; + }; +}; diff --git a/dts/src/arm64/microchip/sparx5_pcb135_board.dtsi b/dts/src/arm64/microchip/sparx5_pcb135_board.dtsi new file mode 100644 index 0000000000..d71f11a10b --- /dev/null +++ b/dts/src/arm64/microchip/sparx5_pcb135_board.dtsi @@ -0,0 +1,92 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries. + */ + +/dts-v1/; +#include "sparx5_pcb_common.dtsi" + +/{ + aliases { + i2c0 = &i2c0; + i2c152 = &i2c152; + i2c153 = &i2c153; + i2c154 = &i2c154; + i2c155 = &i2c155; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +&gpio { + i2cmux_pins_i: i2cmux-pins-i { + pins = "GPIO_35", "GPIO_36", + "GPIO_50", "GPIO_51"; + function = "twi_scl_m"; + output-low; + }; + i2cmux_s29: i2cmux-0 { + pins = "GPIO_35"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_s30: i2cmux-1 { + pins = "GPIO_36"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_s31: i2cmux-2 { + pins = "GPIO_50"; + function = "twi_scl_m"; + output-high; + }; + i2cmux_s32: i2cmux-3 { + pins = "GPIO_51"; + function = "twi_scl_m"; + output-high; + }; +}; + +&axi { + i2c0_imux: i2c0-imux@0 { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c0>; + }; +}; + +&i2c0_imux { + pinctrl-names = + "i2c152", "i2c153", "i2c154", "i2c155", + "idle"; + pinctrl-0 = <&i2cmux_s29>; + pinctrl-1 = <&i2cmux_s30>; + pinctrl-2 = <&i2cmux_s31>; + pinctrl-3 = <&i2cmux_s32>; + pinctrl-4 = <&i2cmux_pins_i>; + i2c152: i2c_sfp1 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c153: i2c_sfp2 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c154: i2c_sfp3 { + reg = <0x2>; + #address-cells = <1>; + #size-cells = <0>; + }; + i2c155: i2c_sfp4 { + reg = <0x3>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/dts/src/arm64/microchip/sparx5_pcb135_emmc.dts b/dts/src/arm64/microchip/sparx5_pcb135_emmc.dts new file mode 100644 index 0000000000..741f0e1226 --- /dev/null +++ b/dts/src/arm64/microchip/sparx5_pcb135_emmc.dts @@ -0,0 +1,17 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries. + */ + +/dts-v1/; +#include "sparx5_pcb135_board.dtsi" + +/ { + model = "Sparx5 PCB135 Reference Board (eMMC enabled)"; + compatible = "microchip,sparx5-pcb135", "microchip,sparx5"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x10000000>; + }; +}; diff --git a/dts/src/arm64/microchip/sparx5_pcb_common.dtsi b/dts/src/arm64/microchip/sparx5_pcb_common.dtsi new file mode 100644 index 0000000000..9d1a082de3 --- /dev/null +++ b/dts/src/arm64/microchip/sparx5_pcb_common.dtsi @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries. + */ + +/dts-v1/; +#include "sparx5.dtsi" + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/dts/src/arm64/nvidia/tegra132-norrin.dts b/dts/src/arm64/nvidia/tegra132-norrin.dts index 9f3206c639..6e5f846566 100644 --- a/dts/src/arm64/nvidia/tegra132-norrin.dts +++ b/dts/src/arm64/nvidia/tegra132-norrin.dts @@ -18,7 +18,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0x80000000>; }; @@ -39,6 +39,9 @@ sor@54540000 { status = "okay"; + avdd-io-hdmi-dp-supply = <&vdd_3v3_hdmi>; + vdd-hdmi-dp-pll-supply = <&vdd_hdmi_pll>; + nvidia,dpaux = <&dpaux>; nvidia,panel = <&panel>; }; @@ -671,7 +674,7 @@ regulator-boot-on; }; - ldo0 { + avdd_1v05_run: ldo0 { regulator-name = "+1.05_RUN_AVDD"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; @@ -781,7 +784,6 @@ battery: smart-battery { compatible = "sbs,sbs-battery"; reg = <0xb>; - battery-name = "battery"; sbs,i2c-retry-count = <2>; sbs,poll-retry-count = <10>; /* power-supplies = <&charger>; */ @@ -893,13 +895,108 @@ nvidia,reset-gpio = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; }; + usb@70090000 { + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */ + <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */ + <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */ + phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1"; + + avddio-pex-supply = <&vdd_1v05_run>; + dvddio-pex-supply = <&vdd_1v05_run>; + avdd-usb-supply = <&vdd_3v3_lp0>; + hvdd-usb-ss-supply = <&vdd_3v3_lp0>; + + status = "okay"; + }; + + padctl@7009f000 { + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-pll-erefe-supply = <&avdd_1v05_run>; + avdd-pex-pll-supply = <&vdd_1v05_run>; + hvdd-pex-pll-e-supply = <&vdd_3v3_lp0>; + + pads { + usb2 { + status = "okay"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + pcie { + status = "okay"; + + lanes { + pcie-0 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + + pcie-1 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-0 { + status = "okay"; + mode = "otg"; + + vbus-supply = <&vdd_usb1_vbus>; + }; + + usb2-1 { + status = "okay"; + mode = "host"; + + vbus-supply = <&vdd_run_cam>; + }; + + usb2-2 { + status = "okay"; + mode = "host"; + + vbus-supply = <&vdd_usb3_vbus>; + }; + + usb3-0 { + nvidia,usb2-companion = <0>; + status = "okay"; + }; + + usb3-1 { + nvidia,usb2-companion = <2>; + status = "okay"; + }; + }; + }; + /* WIFI/BT module */ - sdhci@700b0000 { + mmc@700b0000 { status = "disabled"; }; /* external SD/MMC */ - sdhci@700b0400 { + mmc@700b0400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_HIGH>; @@ -909,39 +1006,12 @@ }; /* EMMC 4.51 */ - sdhci@700b0600 { + mmc@700b0600 { status = "okay"; bus-width = <8>; non-removable; }; - usb@7d000000 { - status = "okay"; - }; - - usb-phy@7d000000 { - status = "okay"; - vbus-supply = <&vdd_usb1_vbus>; - }; - - usb@7d004000 { - status = "okay"; - }; - - usb-phy@7d004000 { - status = "okay"; - vbus-supply = <&vdd_run_cam>; - }; - - usb@7d008000 { - status = "okay"; - }; - - usb-phy@7d008000 { - status = "okay"; - vbus-supply = <&vdd_usb3_vbus>; - }; - backlight: backlight { compatible = "pwm-backlight"; @@ -955,17 +1025,10 @@ backlight-boot-off; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; gpio-keys { @@ -991,146 +1054,144 @@ panel: panel { compatible = "innolux,n116bge"; + power-supply = <&vdd_3v3_panel>; backlight = <&backlight>; ddc-i2c-bus = <&dpaux>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + vdd_mux: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "+VDD_MUX"; + regulator-min-microvolt = <19000000>; + regulator-max-microvolt = <19000000>; + regulator-always-on; + regulator-boot-on; + }; - vdd_mux: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "+VDD_MUX"; - regulator-min-microvolt = <19000000>; - regulator-max-microvolt = <19000000>; - regulator-always-on; - regulator-boot-on; - }; + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "+5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; - vdd_5v0_sys: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "+5V_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vdd_mux>; + }; - vdd_3v3_sys: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "+3.3V_SYS"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vdd_mux>; - }; + vdd_3v3_run: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_RUN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&as3722 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; - vdd_3v3_run: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "+3.3V_RUN"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - gpio = <&as3722 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; + vdd_3v3_hdmi: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3_run>; + }; - vdd_3v3_hdmi: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "+3.3V_AVDD_HDMI_AP_GATED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_3v3_run>; - }; + vdd_led: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "+VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_mux>; + }; - vdd_led: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "+VDD_LED"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_mux>; - }; + vdd_usb1_vbus: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "+5V_USB_HS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_usb1_vbus: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "+5V_USB_HS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_usb3_vbus: regulator@7 { + compatible = "regulator-fixed"; + regulator-name = "+5V_USB_SS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_usb3_vbus: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "+5V_USB_SS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_3v3_panel: regulator@8 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_PANEL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&as3722 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; - vdd_3v3_panel: regulator@8 { - compatible = "regulator-fixed"; - reg = <8>; - regulator-name = "+3.3V_PANEL"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&as3722 4 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; + vdd_hdmi_pll: regulator@9 { + compatible = "regulator-fixed"; + regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05_run>; + }; - vdd_hdmi_pll: regulator@9 { - compatible = "regulator-fixed"; - reg = <9>; - regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL_AP_GATE"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; - vin-supply = <&vdd_1v05_run>; - }; + vdd_5v0_hdmi: regulator@10 { + compatible = "regulator-fixed"; + regulator-name = "+5V_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; - vdd_5v0_hdmi: regulator@10 { - compatible = "regulator-fixed"; - reg = <10>; - regulator-name = "+5V_HDMI_CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_5v0_ts: regulator@11 { + compatible = "regulator-fixed"; + regulator-name = "+5V_VDD_TS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vdd_5v0_ts: regulator@11 { - compatible = "regulator-fixed"; - reg = <11>; - regulator-name = "+5V_VDD_TS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vdd_3v3_lp0: regulator@12 { + compatible = "regulator-fixed"; + regulator-name = "+3.3V_LP0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* + * TODO: find a way to wire this up with the USB EHCI + * controllers so that it can be enabled on demand. + */ + regulator-always-on; + gpio = <&as3722 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; }; }; diff --git a/dts/src/arm64/nvidia/tegra132.dtsi b/dts/src/arm64/nvidia/tegra132.dtsi index 11a1bb4285..e40281510c 100644 --- a/dts/src/arm64/nvidia/tegra132.dtsi +++ b/dts/src/arm64/nvidia/tegra132.dtsi @@ -17,9 +17,9 @@ pcie@1003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; - reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ - 0x0 0x01003800 0x0 0x00000800 /* AFI registers */ - 0x0 0x02000000 0x0 0x10000000>; /* configuration space */ + reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */ + <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */ + <0x0 0x02000000 0x0 0x10000000>; /* configuration space */ reg-names = "pads", "afi", "cs"; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ @@ -33,11 +33,11 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */ - 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */ - 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */ - 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */ - 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ + ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */ + <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */ + <0x01000000 0 0x0 0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */ + <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */ + <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ clocks = <&tegra_car TEGRA124_CLK_PCIE>, <&tegra_car TEGRA124_CLK_AFI>, @@ -50,9 +50,6 @@ reset-names = "pex", "afi", "pcie_x"; status = "disabled"; - phys = <&padctl TEGRA_XUSB_PADCTL_PCIE>; - phy-names = "pcie"; - pci@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>; @@ -83,10 +80,12 @@ }; host1x@50000000 { - compatible = "nvidia,tegra124-host1x", "simple-bus"; + compatible = "nvidia,tegra132-host1x", + "nvidia,tegra124-host1x"; reg = <0x0 0x50000000 0x0 0x00034000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */ + interrupt-names = "syncpt", "host1x"; clocks = <&tegra_car TEGRA124_CLK_HOST1X>; clock-names = "host1x"; resets = <&tegra_car 28>; @@ -101,9 +100,8 @@ compatible = "nvidia,tegra124-dc"; reg = <0x0 0x54200000 0x0 0x00040000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_DISP1>, - <&tegra_car TEGRA124_CLK_PLL_P>; - clock-names = "dc", "parent"; + clocks = <&tegra_car TEGRA124_CLK_DISP1>; + clock-names = "dc"; resets = <&tegra_car 27>; reset-names = "dc"; @@ -116,9 +114,8 @@ compatible = "nvidia,tegra124-dc"; reg = <0x0 0x54240000 0x0 0x00040000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA124_CLK_DISP2>, - <&tegra_car TEGRA124_CLK_PLL_P>; - clock-names = "dc", "parent"; + clocks = <&tegra_car TEGRA124_CLK_DISP2>; + clock-names = "dc"; resets = <&tegra_car 26>; reset-names = "dc"; @@ -144,10 +141,11 @@ reg = <0x0 0x54540000 0x0 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_SOR0>, + <&tegra_car TEGRA124_CLK_SOR0_OUT>, <&tegra_car TEGRA124_CLK_PLL_D_OUT0>, <&tegra_car TEGRA124_CLK_PLL_DP>, <&tegra_car TEGRA124_CLK_CLK_M>; - clock-names = "sor", "parent", "dp", "safe"; + clock-names = "sor", "out", "parent", "dp", "safe"; resets = <&tegra_car 182>; reset-names = "sor"; status = "disabled"; @@ -163,6 +161,11 @@ resets = <&tegra_car 181>; reset-names = "dpaux"; status = "disabled"; + + i2c-bus { + #address-cells = <1>; + #size-cells = <0>; + }; }; }; @@ -607,7 +610,7 @@ }; emc: external-memory-controller@7001b000 { - compatible = "nvidia,tegra132-emc", "nvidia,tegra124-emc"; + compatible = "nvidia,tegra132-emc"; reg = <0x0 0x7001b000 0x0 0x1000>; clocks = <&tegra_car TEGRA124_CLK_EMC>; clock-names = "emc"; @@ -629,8 +632,6 @@ <&tegra_car 123>, <&tegra_car 129>; reset-names = "sata", "sata-oob", "sata-cold"; - phys = <&padctl TEGRA_XUSB_PADCTL_SATA>; - phy-names = "sata-phy"; status = "disabled"; }; @@ -650,6 +651,41 @@ status = "disabled"; }; + usb@70090000 { + compatible = "nvidia,tegra132-xusb", "nvidia,tegra124-xusb"; + reg = <0x0 0x70090000 0x0 0x8000>, + <0x0 0x70098000 0x0 0x1000>, + <0x0 0x70099000 0x0 0x1000>; + reg-names = "hcd", "fpci", "ipfs"; + + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&tegra_car TEGRA124_CLK_XUSB_HOST>, + <&tegra_car TEGRA124_CLK_XUSB_HOST_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_FALCON_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_SS>, + <&tegra_car TEGRA124_CLK_XUSB_SS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_SS_DIV2>, + <&tegra_car TEGRA124_CLK_XUSB_HS_SRC>, + <&tegra_car TEGRA124_CLK_XUSB_FS_SRC>, + <&tegra_car TEGRA124_CLK_PLL_U_480M>, + <&tegra_car TEGRA124_CLK_CLK_M>, + <&tegra_car TEGRA124_CLK_PLL_E>; + clock-names = "xusb_host", "xusb_host_src", + "xusb_falcon_src", "xusb_ss", + "xusb_ss_src", "xusb_ss_div2", + "xusb_hs_src", "xusb_fs_src", + "pll_u_480m", "clk_m", "pll_e"; + resets = <&tegra_car 89>, <&tegra_car 156>, + <&tegra_car 143>; + reset-names = "xusb_host", "xusb_ss", "xusb_src"; + + nvidia,xusb-padctl = <&padctl>; + + status = "disabled"; + }; + padctl: padctl@7009f000 { compatible = "nvidia,tegra132-xusb-padctl", "nvidia,tegra124-xusb-padctl"; @@ -657,40 +693,130 @@ resets = <&tegra_car 142>; reset-names = "padctl"; - #phy-cells = <1>; + pads { + usb2 { + status = "disabled"; + + lanes { + usb2-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + usb2-2 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; - phys { - pcie-0 { + ulpi { status = "disabled"; + + lanes { + ulpi-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; }; - sata-0 { + hsic { status = "disabled"; + + lanes { + hsic-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + hsic-1 { + status = "disabled"; + #phy-cells = <0>; + }; + }; }; - usb3-0 { + pcie { status = "disabled"; + + lanes { + pcie-0 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-1 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-2 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-3 { + status = "disabled"; + #phy-cells = <0>; + }; + + pcie-4 { + status = "disabled"; + #phy-cells = <0>; + }; + }; }; - usb3-1 { + sata { + status = "disabled"; + + lanes { + sata-0 { + status = "disabled"; + #phy-cells = <0>; + }; + }; + }; + }; + + ports { + usb2-0 { status = "disabled"; }; - utmi-0 { + usb2-1 { status = "disabled"; }; - utmi-1 { + usb2-2 { status = "disabled"; }; - utmi-2 { + hsic-0 { + status = "disabled"; + }; + + hsic-1 { + status = "disabled"; + }; + + usb3-0 { + status = "disabled"; + }; + + usb3-1 { status = "disabled"; }; }; }; - sdhci@700b0000 { + mmc@700b0000 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; @@ -701,7 +827,7 @@ status = "disabled"; }; - sdhci@700b0200 { + mmc@700b0200 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0200 0x0 0x200>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; @@ -712,7 +838,7 @@ status = "disabled"; }; - sdhci@700b0400 { + mmc@700b0400 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0400 0x0 0x200>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; @@ -723,7 +849,7 @@ status = "disabled"; }; - sdhci@700b0600 { + mmc@700b0600 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0600 0x0 0x200>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; @@ -736,12 +862,12 @@ soctherm: thermal-sensor@700e2000 { compatible = "nvidia,tegra132-soctherm"; - reg = <0x0 0x700e2000 0x0 0x600 /* 0: SOC_THERM reg_base */ - 0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */ + reg = <0x0 0x700e2000 0x0 0x600>, /* 0: SOC_THERM reg_base */ + <0x0 0x70040000 0x0 0x200>; /* 2: CCROC reg_base */ reg-names = "soctherm-reg", "ccroc-reg"; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, - <&tegra_car TEGRA124_CLK_SOC_THERM>; + <&tegra_car TEGRA124_CLK_SOC_THERM>; clock-names = "tsensor", "soctherm"; resets = <&tegra_car 78>; reset-names = "soctherm"; @@ -992,6 +1118,7 @@ clock-names = "reg", "pll_u", "utmi-pads"; resets = <&tegra_car 22>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -1030,6 +1157,7 @@ clock-names = "reg", "pll_u", "utmi-pads"; resets = <&tegra_car 58>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -1067,6 +1195,7 @@ clock-names = "reg", "pll_u", "utmi-pads"; resets = <&tegra_car 59>, <&tegra_car 22>; reset-names = "usb", "utmi-pads"; + #phy-cells = <0>; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/dts/src/arm64/nvidia/tegra186-p2771-0000.dts b/dts/src/arm64/nvidia/tegra186-p2771-0000.dts index 1af7f9ffb7..802b8c5248 100644 --- a/dts/src/arm64/nvidia/tegra186-p2771-0000.dts +++ b/dts/src/arm64/nvidia/tegra186-p2771-0000.dts @@ -103,7 +103,7 @@ }; /* SDMMC1 (SD/MMC) */ - sdhci@3400000 { + mmc@3400000 { status = "okay"; vmmc-supply = <&vdd_sd>; @@ -119,10 +119,6 @@ avdd-pll-erefeut-supply = <&vdd_1v8_pll>; avdd-usb-supply = <&vdd_3v3_sys>; - dvdd-pex-supply = <&vdd_pex>; - dvdd-pex-pll-supply = <&vdd_pex>; - hvdd-pex-supply = <&vdd_1v8>; - hvdd-pex-pll-supply = <&vdd_1v8>; vclamp-usb-supply = <&vdd_1v8>; vddio-hsic-supply = <&gnd>; @@ -175,19 +171,18 @@ status = "okay"; mode = "otg"; vbus-supply = <&vdd_usb0>; - usb-role-switch; + connector { - compatible = "usb-b-connector", - "gpio-usb-b-connector"; + compatible = "gpio-usb-b-connector", + "usb-b-connector"; label = "micro-USB"; type = "micro"; - vbus-gpio = <&gpio - TEGRA186_MAIN_GPIO(X, 7) - GPIO_ACTIVE_LOW>; - id-gpio = <&pmic 0 GPIO_ACTIVE_HIGH>; + vbus-gpios = <&gpio + TEGRA186_MAIN_GPIO(X, 7) + GPIO_ACTIVE_LOW>; + id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>; }; - }; usb2-1 { @@ -199,6 +194,7 @@ usb3-0 { nvidia,usb2-companion = <1>; + vbus-supply = <&vdd_usb1>; status = "okay"; }; }; @@ -227,8 +223,8 @@ reg = <0x57>; vcc-supply = <&vdd_1v8>; - address-bits = <8>; - page-size = <8>; + address-width = <8>; + pagesize = <8>; size = <256>; read-only; }; @@ -286,8 +282,8 @@ sor@15580000 { status = "okay"; - avdd-io-supply = <&vdd_hdmi_1v05>; - vdd-pll-supply = <&vdd_1v8_ap>; + avdd-io-hdmi-dp-supply = <&vdd_hdmi_1v05>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8_ap>; hdmi-supply = <&vdd_hdmi>; nvidia,ddc-i2c-bus = <&ddc>; @@ -333,62 +329,51 @@ }; }; - regulators { - vdd_sd: regulator@100 { - compatible = "regulator-fixed"; - reg = <100>; - - regulator-name = "SD_CARD_SW_PWR"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + vdd_sd: regulator@100 { + compatible = "regulator-fixed"; + regulator-name = "SD_CARD_SW_PWR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA186_MAIN_GPIO(P, 6) - GPIO_ACTIVE_HIGH>; - enable-active-high; + gpio = <&gpio TEGRA186_MAIN_GPIO(P, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; - - vdd_hdmi: regulator@101 { - compatible = "regulator-fixed"; - reg = <101>; - - regulator-name = "VDD_HDMI_5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&exp1 14 GPIO_ACTIVE_HIGH>; - enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_hdmi: regulator@101 { + compatible = "regulator-fixed"; + regulator-name = "VDD_HDMI_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; - vdd_usb0: regulator@102 { - compatible = "regulator-fixed"; - reg = <102>; + gpio = <&exp1 14 GPIO_ACTIVE_HIGH>; + enable-active-high; - regulator-name = "VDD_USB0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_5v0_sys>; + }; - gpio = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; + vdd_usb0: regulator@102 { + compatible = "regulator-fixed"; + regulator-name = "VDD_USB0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; - vin-supply = <&vdd_5v0_sys>; - }; + gpio = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; - vdd_usb1: regulator@103 { - compatible = "regulator-fixed"; - reg = <103>; + vin-supply = <&vdd_5v0_sys>; + }; - regulator-name = "VDD_USB1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + vdd_usb1: regulator@103 { + compatible = "regulator-fixed"; + regulator-name = "VDD_USB1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA186_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; + gpio = <&gpio TEGRA186_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; + vin-supply = <&vdd_5v0_sys>; }; }; diff --git a/dts/src/arm64/nvidia/tegra186-p3310.dtsi b/dts/src/arm64/nvidia/tegra186-p3310.dtsi index 2fcaa2e643..53d92fdd7f 100644 --- a/dts/src/arm64/nvidia/tegra186-p3310.dtsi +++ b/dts/src/arm64/nvidia/tegra186-p3310.dtsi @@ -9,9 +9,6 @@ aliases { ethernet0 = "/ethernet@2490000"; - sdhci0 = "/sdhci@3460000"; - sdhci1 = "/sdhci@3400000"; - serial0 = &uarta; i2c0 = "/bpmp/i2c"; i2c1 = "/i2c@3160000"; i2c2 = "/i2c@c240000"; @@ -20,6 +17,9 @@ i2c5 = "/i2c@31c0000"; i2c6 = "/i2c@c250000"; i2c7 = "/i2c@31e0000"; + mmc0 = "/mmc@3460000"; + mmc1 = "/mmc@3400000"; + serial0 = &uarta; }; chosen { @@ -27,7 +27,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x2 0x00000000>; }; @@ -50,6 +50,8 @@ interrupt-parent = <&gpio>; interrupts = <TEGRA186_MAIN_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>; + + #phy-cells = <0>; }; }; }; @@ -133,7 +135,7 @@ }; /* SDMMC1 (SD/MMC) */ - sdhci@3400000 { + mmc@3400000 { cd-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>; wp-gpios = <&gpio TEGRA186_MAIN_GPIO(P, 4) GPIO_ACTIVE_HIGH>; @@ -141,12 +143,12 @@ }; /* SDMMC3 (SDIO) */ - sdhci@3440000 { + mmc@3440000 { status = "okay"; }; /* SDMMC4 (eMMC) */ - sdhci@3460000 { + mmc@3460000 { status = "okay"; bus-width = <8>; non-removable; @@ -172,8 +174,8 @@ reg = <0x50>; vcc-supply = <&vdd_1v8>; - address-bits = <8>; - page-size = <8>; + address-width = <8>; + pagesize = <8>; size = <256>; read-only; }; @@ -390,45 +392,33 @@ method = "smc"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - gnd: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - - regulator-name = "GND"; - regulator-min-microvolt = <0>; - regulator-max-microvolt = <0>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_5v0_sys: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - - regulator-name = "VDD_5V0_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; + gnd: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "GND"; + regulator-min-microvolt = <0>; + regulator-max-microvolt = <0>; + regulator-always-on; + regulator-boot-on; + }; - vdd_1v8_ap: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; - regulator-name = "VDD_1V8_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + vdd_1v8_ap: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; - gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; - enable-active-high; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; - vin-supply = <&vdd_1v8>; - }; + vin-supply = <&vdd_1v8>; }; }; diff --git a/dts/src/arm64/nvidia/tegra186.dtsi b/dts/src/arm64/nvidia/tegra186.dtsi index 58100fb9cd..34d249d85d 100644 --- a/dts/src/arm64/nvidia/tegra186.dtsi +++ b/dts/src/arm64/nvidia/tegra186.dtsi @@ -60,6 +60,9 @@ clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref"; resets = <&bpmp TEGRA186_RESET_EQOS>; reset-names = "eqos"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_EQOSR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_EQOSW &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_EQOS>; status = "disabled"; @@ -139,12 +142,13 @@ }; }; - memory-controller@2c00000 { + mc: memory-controller@2c00000 { compatible = "nvidia,tegra186-mc"; reg = <0x0 0x02c00000 0x0 0xb0000>; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #interconnect-cells = <1>; #address-cells = <2>; #size-cells = <2>; @@ -163,6 +167,8 @@ clocks = <&bpmp TEGRA186_CLK_EMC>; clock-names = "emc"; + #interconnect-cells = <0>; + nvidia,bpmp = <&bpmp>; }; }; @@ -327,7 +333,7 @@ status = "disabled"; }; - sdmmc1: sdhci@3400000 { + sdmmc1: mmc@3400000 { compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03400000 0x0 0x10000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; @@ -335,6 +341,9 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC1>; reset-names = "sdhci"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRA &emc>, + <&mc TEGRA186_MEMORY_CLIENT_SDMMCWA &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_SDMMC1>; pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; pinctrl-0 = <&sdmmc1_3v3>; @@ -353,7 +362,7 @@ status = "disabled"; }; - sdmmc2: sdhci@3420000 { + sdmmc2: mmc@3420000 { compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03420000 0x0 0x10000>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; @@ -361,6 +370,9 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC2>; reset-names = "sdhci"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAA &emc>, + <&mc TEGRA186_MEMORY_CLIENT_SDMMCWAA &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_SDMMC2>; pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; pinctrl-0 = <&sdmmc2_3v3>; @@ -374,7 +386,7 @@ status = "disabled"; }; - sdmmc3: sdhci@3440000 { + sdmmc3: mmc@3440000 { compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03440000 0x0 0x10000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; @@ -382,6 +394,9 @@ clock-names = "sdhci"; resets = <&bpmp TEGRA186_RESET_SDMMC3>; reset-names = "sdhci"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_SDMMCW &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_SDMMC3>; pinctrl-names = "sdmmc-3v3", "sdmmc-1v8"; pinctrl-0 = <&sdmmc3_3v3>; @@ -397,7 +412,7 @@ status = "disabled"; }; - sdmmc4: sdhci@3460000 { + sdmmc4: mmc@3460000 { compatible = "nvidia,tegra186-sdhci"; reg = <0x0 0x03460000 0x0 0x10000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; @@ -408,6 +423,9 @@ assigned-clock-parents = <&bpmp TEGRA186_CLK_PLLC4_VCO>; resets = <&bpmp TEGRA186_RESET_SDMMC4>; reset-names = "sdhci"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_SDMMCRAB &emc>, + <&mc TEGRA186_MEMORY_CLIENT_SDMMCWAB &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_SDMMC4>; nvidia,pad-autocal-pull-up-offset-hs400 = <0x05>; nvidia,pad-autocal-pull-down-offset-hs400 = <0x05>; @@ -436,6 +454,9 @@ <&bpmp TEGRA186_RESET_HDA2CODEC_2X>; reset-names = "hda", "hda2hdmi", "hda2codec_2x"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_HDAR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_HDAW &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_HDA>; status = "disabled"; }; @@ -547,8 +568,7 @@ <0x0 0x03538000 0x0 0x1000>; reg-names = "hcd", "fpci"; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA186_CLK_XUSB_HOST>, <&bpmp TEGRA186_CLK_XUSB_FALCON>, <&bpmp TEGRA186_CLK_XUSB_SS>, @@ -564,6 +584,9 @@ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_XUSBC>, <&bpmp TEGRA186_POWER_DOMAIN_XUSBA>; power-domain-names = "xusb_host", "xusb_ss"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_XUSB_HOSTW &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_XUSB_HOST>; #address-cells = <1>; #size-cells = <0>; @@ -752,9 +775,9 @@ compatible = "nvidia,tegra186-pcie"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>; device_type = "pci"; - reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */ - 0x0 0x10003800 0x0 0x00000800 /* AFI registers */ - 0x0 0x40000000 0x0 0x10000000>; /* configuration space */ + reg = <0x0 0x10003000 0x0 0x00000800>, /* PADS registers */ + <0x0 0x10003800 0x0 0x00000800>, /* AFI registers */ + <0x0 0x40000000 0x0 0x10000000>; /* configuration space */ reg-names = "pads", "afi", "cs"; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ @@ -769,22 +792,26 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */ - 0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */ - 0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */ - 0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */ - 0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000 /* non-prefetchable memory (127 MiB) */ - 0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */ + ranges = <0x02000000 0 0x10000000 0x0 0x10000000 0 0x00001000>, /* port 0 configuration space */ + <0x02000000 0 0x10001000 0x0 0x10001000 0 0x00001000>,/* port 1 configuration space */ + <0x02000000 0 0x10004000 0x0 0x10004000 0 0x00001000>, /* port 2 configuration space */ + <0x01000000 0 0x0 0x0 0x50000000 0 0x00010000>, /* downstream I/O (64 KiB) */ + <0x02000000 0 0x50100000 0x0 0x50100000 0 0x07f00000>, /* non-prefetchable memory (127 MiB) */ + <0x42000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */ - clocks = <&bpmp TEGRA186_CLK_AFI>, - <&bpmp TEGRA186_CLK_PCIE>, + clocks = <&bpmp TEGRA186_CLK_PCIE>, + <&bpmp TEGRA186_CLK_AFI>, <&bpmp TEGRA186_CLK_PLLE>; - clock-names = "afi", "pex", "pll_e"; + clock-names = "pex", "afi", "pll_e"; - resets = <&bpmp TEGRA186_RESET_AFI>, - <&bpmp TEGRA186_RESET_PCIE>, + resets = <&bpmp TEGRA186_RESET_PCIE>, + <&bpmp TEGRA186_RESET_AFI>, <&bpmp TEGRA186_RESET_PCIEXCLK>; - reset-names = "afi", "pex", "pcie_x"; + reset-names = "pex", "afi", "pcie_x"; + + interconnects = <&mc TEGRA186_MEMORY_CLIENT_AFIR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_AFIW &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_AFI>; iommu-map = <0x0 &smmu TEGRA186_SID_AFI 0x1000>; @@ -906,12 +933,13 @@ }; host1x@13e00000 { - compatible = "nvidia,tegra186-host1x", "simple-bus"; + compatible = "nvidia,tegra186-host1x"; reg = <0x0 0x13e00000 0x0 0x10000>, <0x0 0x13e10000 0x0 0x10000>; reg-names = "hypervisor", "vm"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "syncpt", "host1x"; clocks = <&bpmp TEGRA186_CLK_HOST1X>; clock-names = "host1x"; resets = <&bpmp TEGRA186_RESET_HOST1X>; @@ -921,6 +949,10 @@ #size-cells = <1>; ranges = <0x15000000 0x0 0x15000000 0x01000000>; + + interconnects = <&mc TEGRA186_MEMORY_CLIENT_HOST1XDMAR &emc>; + interconnect-names = "dma-mem"; + iommus = <&smmu TEGRA186_SID_HOST1X>; dpaux1: dpaux@15040000 { @@ -958,7 +990,7 @@ }; display-hub@15200000 { - compatible = "nvidia,tegra186-display", "simple-bus"; + compatible = "nvidia,tegra186-display"; reg = <0x15200000 0x00040000>; resets = <&bpmp TEGRA186_RESET_NVDISPLAY0_MISC>, <&bpmp TEGRA186_RESET_NVDISPLAY0_WGRP0>, @@ -992,6 +1024,9 @@ reset-names = "dc"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISP>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; iommus = <&smmu TEGRA186_SID_NVDISPLAY>; nvidia,outputs = <&dsia &dsib &sor0 &sor1>; @@ -1008,6 +1043,9 @@ reset-names = "dc"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPB>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; iommus = <&smmu TEGRA186_SID_NVDISPLAY>; nvidia,outputs = <&dsia &dsib &sor0 &sor1>; @@ -1024,6 +1062,9 @@ reset-names = "dc"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_DISPC>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; iommus = <&smmu TEGRA186_SID_NVDISPLAY>; nvidia,outputs = <&sor0 &sor1>; @@ -1056,6 +1097,9 @@ reset-names = "vic"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_VIC>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_VICSRD &emc>, + <&mc TEGRA186_MEMORY_CLIENT_VICSWR &emc>; + interconnect-names = "dma-mem", "write"; iommus = <&smmu TEGRA186_SID_VIC>; }; @@ -1199,8 +1243,8 @@ compatible = "nvidia,gp10b"; reg = <0x0 0x17000000 0x0 0x1000000>, <0x0 0x18000000 0x0 0x1000000>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH - GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "stall", "nonstall"; clocks = <&bpmp TEGRA186_CLK_GPCCLK>, @@ -1211,25 +1255,28 @@ status = "disabled"; power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_GPUSRD &emc>, + <&mc TEGRA186_MEMORY_CLIENT_GPUSWR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_GPUSRD2 &emc>, + <&mc TEGRA186_MEMORY_CLIENT_GPUSWR2 &emc>; + interconnect-names = "dma-mem", "write-0", "read-1", "write-1"; }; - sysram@30000000 { + sram@30000000 { compatible = "nvidia,tegra186-sysram", "mmio-sram"; reg = <0x0 0x30000000 0x0 0x50000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x30000000 0x50000>; - cpu_bpmp_tx: shmem@4e000 { - compatible = "nvidia,tegra186-bpmp-shmem"; - reg = <0x0 0x4e000 0x0 0x1000>; + cpu_bpmp_tx: sram@4e000 { + reg = <0x4e000 0x1000>; label = "cpu-bpmp-tx"; pool; }; - cpu_bpmp_rx: shmem@4f000 { - compatible = "nvidia,tegra186-bpmp-shmem"; - reg = <0x0 0x4f000 0x0 0x1000>; + cpu_bpmp_rx: sram@4f000 { + reg = <0x4f000 0x1000>; label = "cpu-bpmp-rx"; pool; }; @@ -1237,6 +1284,11 @@ bpmp: bpmp { compatible = "nvidia,tegra186-bpmp"; + interconnects = <&mc TEGRA186_MEMORY_CLIENT_BPMPR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_BPMPW &emc>, + <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAR &emc>, + <&mc TEGRA186_MEMORY_CLIENT_BPMPDMAW &emc>; + interconnect-names = "read", "write", "dma-mem", "dma-write"; iommus = <&smmu TEGRA186_SID_BPMP>; mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>; diff --git a/dts/src/arm64/nvidia/tegra194-p2888.dtsi b/dts/src/arm64/nvidia/tegra194-p2888.dtsi index b96eb4e145..4c005b8112 100644 --- a/dts/src/arm64/nvidia/tegra194-p2888.dtsi +++ b/dts/src/arm64/nvidia/tegra194-p2888.dtsi @@ -8,18 +8,18 @@ compatible = "nvidia,p2888", "nvidia,tegra194"; aliases { - ethernet0 = "/cbb@0/ethernet@2490000"; - sdhci0 = "/cbb@0/sdhci@3460000"; - sdhci1 = "/cbb@0/sdhci@3400000"; - serial0 = &tcu; + ethernet0 = "/bus@0/ethernet@2490000"; i2c0 = "/bpmp/i2c"; - i2c1 = "/cbb@0/i2c@3160000"; - i2c2 = "/cbb@0/i2c@c240000"; - i2c3 = "/cbb@0/i2c@3180000"; - i2c4 = "/cbb@0/i2c@3190000"; - i2c5 = "/cbb@0/i2c@31c0000"; - i2c6 = "/cbb@0/i2c@c250000"; - i2c7 = "/cbb@0/i2c@31e0000"; + i2c1 = "/bus@0/i2c@3160000"; + i2c2 = "/bus@0/i2c@c240000"; + i2c3 = "/bus@0/i2c@3180000"; + i2c4 = "/bus@0/i2c@3190000"; + i2c5 = "/bus@0/i2c@31c0000"; + i2c6 = "/bus@0/i2c@c250000"; + i2c7 = "/bus@0/i2c@31e0000"; + mmc0 = "/bus@0/mmc@3460000"; + mmc1 = "/bus@0/mmc@3400000"; + serial0 = &tcu; }; chosen { @@ -27,7 +27,7 @@ stdout-path = "serial0:115200n8"; }; - cbb@0 { + bus@0 { ethernet@2490000 { status = "okay"; @@ -44,6 +44,7 @@ reg = <0x0>; interrupt-parent = <&gpio>; interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>; + #phy-cells = <0>; }; }; }; @@ -57,12 +58,12 @@ }; /* SDMMC1 (SD/MMC) */ - sdhci@3400000 { + mmc@3400000 { cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>; }; /* SDMMC4 (eMMC) */ - sdhci@3460000 { + mmc@3460000 { status = "okay"; bus-width = <8>; non-removable; @@ -292,65 +293,49 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_5v0_sys: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - - regulator-name = "VIN_SYS_5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_hdmi: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - - regulator-name = "VDD_5V0_HDMI_CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vdd_3v3_pcie: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - - regulator-name = "PEX_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; - regulator-boot-on; - enable-active-high; - }; + vdd_5v0_sys: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VIN_SYS_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; - vdd_12v_pcie: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; + vdd_hdmi: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - regulator-name = "VDD_12V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>; - regulator-boot-on; - }; + vdd_3v3_pcie: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "PEX_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; - vdd_5v_sata: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; + vdd_12v_pcie: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "VDD_12V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + }; - regulator-name = "VDD_5V_SATA"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vdd_5v_sata: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V_SATA"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; }; }; diff --git a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts index e15d1eac05..90b6ea5467 100644 --- a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts +++ b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts @@ -10,7 +10,7 @@ model = "NVIDIA Jetson AGX Xavier Developer Kit"; compatible = "nvidia,p2972-0000", "nvidia,tegra194"; - cbb@0 { + bus@0 { aconnect@2900000 { status = "okay"; @@ -28,7 +28,7 @@ }; /* SDMMC1 (SD/MMC) */ - sdhci@3400000 { + mmc@3400000 { status = "okay"; }; @@ -93,10 +93,10 @@ usb@3610000 { status = "okay"; - phys = <&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, - <&{/cbb@0/padctl@3520000/pads/usb2/lanes/usb2-3}>, - <&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, - <&{/cbb@0/padctl@3520000/pads/usb3/lanes/usb3-3}>; + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-3}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-3}>; phy-names = "usb2-1", "usb2-3", "usb3-0", "usb3-3"; }; @@ -145,8 +145,8 @@ sor@15b80000 { status = "okay"; - avdd-io-supply = <&vdd_1v0>; - vdd-pll-supply = <&vdd_1v8hs>; + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; hdmi-supply = <&vdd_hdmi>; nvidia,ddc-i2c-bus = <&ddc>; diff --git a/dts/src/arm64/nvidia/tegra194-p3509-0000+p3668-0000.dts b/dts/src/arm64/nvidia/tegra194-p3509-0000+p3668-0000.dts new file mode 100644 index 0000000000..c1c589805d --- /dev/null +++ b/dts/src/arm64/nvidia/tegra194-p3509-0000+p3668-0000.dts @@ -0,0 +1,331 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/input/gpio-keys.h> + +#include "tegra194-p3668-0000.dtsi" + +/ { + model = "NVIDIA Jetson Xavier NX Developer Kit"; + compatible = "nvidia,p3509-0000+p3668-0000", "nvidia,tegra194"; + + bus@0 { + aconnect@2900000 { + status = "okay"; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + }; + + ddc: i2c@3190000 { + status = "okay"; + }; + + hda@3510000 { + nvidia,model = "jetson-xavier-nx-hda"; + status = "okay"; + }; + + padctl@3520000 { + status = "okay"; + + pads { + usb2 { + lanes { + usb2-1 { + status = "okay"; + }; + + usb2-2 { + status = "okay"; + }; + }; + }; + + usb3 { + lanes { + usb3-2 { + status = "okay"; + }; + }; + }; + }; + + ports { + usb2-1 { + mode = "host"; + status = "okay"; + }; + + usb2-2 { + mode = "host"; + vbus-supply = <&vdd_5v0_sys>; + status = "okay"; + }; + + usb3-2 { + nvidia,usb2-companion = <1>; + vbus-supply = <&vdd_5v0_sys>; + status = "okay"; + }; + }; + }; + + usb@3610000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-1}>, + <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-2}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>; + phy-names = "usb2-1", "usb2-2", "usb3-2"; + }; + + pwm@32d0000 { + status = "okay"; + }; + + host1x@13e00000 { + display-hub@15200000 { + status = "okay"; + }; + + dpaux@155c0000 { + status = "okay"; + }; + + dpaux@155d0000 { + status = "okay"; + }; + + /* DP0 */ + sor@15b00000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; + + nvidia,dpaux = <&dpaux0>; + }; + + /* HDMI */ + sor@15b40000 { + status = "okay"; + + avdd-io-hdmi-dp-supply = <&vdd_1v0>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8hs>; + hdmi-supply = <&vdd_hdmi>; + + nvidia,ddc-i2c-bus = <&ddc>; + nvidia,hpd-gpio = <&gpio TEGRA194_MAIN_GPIO(M, 1) + GPIO_ACTIVE_LOW>; + }; + }; + }; + + pcie@14160000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_hsio_11>; + phy-names = "p2u-0"; + }; + + pcie@141a0000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + + pcie_ep@141a0000 { + status = "disabled"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + reset-gpios = <&gpio TEGRA194_MAIN_GPIO(GG, 1) GPIO_ACTIVE_LOW>; + + nvidia,refclk-select-gpios = <&gpio_aon TEGRA194_AON_GPIO(AA, 5) + GPIO_ACTIVE_HIGH>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + + fan: fan { + compatible = "pwm-fan"; + pwms = <&pwm6 0 45334>; + + cooling-levels = <0 64 128 255>; + #cooling-cells = <2>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + force-recovery { + label = "Force Recovery"; + gpios = <&gpio TEGRA194_MAIN_GPIO(G, 0) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_SLEEP>; + debounce-interval = <10>; + }; + + power { + label = "Power"; + gpios = <&gpio_aon TEGRA194_AON_GPIO(EE, 4) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + }; + + vdd_5v0_sys: regulator@100 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_sys: regulator@101 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_ao: regulator@102 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_AO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8: regulator@103 { + compatible = "regulator-fixed"; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_hdmi: regulator@104 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_HDMI_CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + thermal-zones { + cpu { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + cpu_trip_critical: critical { + temperature = <96500>; + hysteresis = <0>; + type = "critical"; + }; + + cpu_trip_hot: hot { + temperature = <70000>; + hysteresis = <2000>; + type = "hot"; + }; + + cpu_trip_active: active { + temperature = <50000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_trip_passive: passive { + temperature = <30000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + cpu-critical { + cooling-device = <&fan 3 3>; + trip = <&cpu_trip_critical>; + }; + + cpu-hot { + cooling-device = <&fan 2 2>; + trip = <&cpu_trip_hot>; + }; + + cpu-active { + cooling-device = <&fan 1 1>; + trip = <&cpu_trip_active>; + }; + + cpu-passive { + cooling-device = <&fan 0 0>; + trip = <&cpu_trip_passive>; + }; + }; + }; + + gpu { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + gpu_alert0: critical { + temperature = <99000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + + aux { + polling-delay = <0>; + polling-delay-passive = <500>; + status = "okay"; + + trips { + aux_alert0: critical { + temperature = <90000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; diff --git a/dts/src/arm64/nvidia/tegra194-p3668-0000.dtsi b/dts/src/arm64/nvidia/tegra194-p3668-0000.dtsi new file mode 100644 index 0000000000..10cb836aea --- /dev/null +++ b/dts/src/arm64/nvidia/tegra194-p3668-0000.dtsi @@ -0,0 +1,290 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "tegra194.dtsi" + +#include <dt-bindings/mfd/max77620.h> + +/ { + model = "NVIDIA Jetson Xavier NX"; + compatible = "nvidia,p3668-0000", "nvidia,tegra194"; + + aliases { + ethernet0 = "/bus@0/ethernet@2490000"; + i2c0 = "/bpmp/i2c"; + i2c1 = "/bus@0/i2c@3160000"; + i2c2 = "/bus@0/i2c@c240000"; + i2c3 = "/bus@0/i2c@3180000"; + i2c4 = "/bus@0/i2c@3190000"; + i2c5 = "/bus@0/i2c@31c0000"; + i2c6 = "/bus@0/i2c@c250000"; + i2c7 = "/bus@0/i2c@31e0000"; + mmc0 = "/bus@0/mmc@3460000"; + rtc0 = "/bpmp/i2c/pmic@3c"; + rtc1 = "/bus@0/rtc@c2a0000"; + serial0 = &tcu; + }; + + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = "serial0:115200n8"; + }; + + bus@0 { + ethernet@2490000 { + status = "okay"; + + phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; + phy-mode = "rgmii-id"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>; + #phy-cells = <0>; + }; + }; + }; + + memory-controller@2c00000 { + status = "okay"; + }; + + serial@c280000 { + status = "okay"; + }; + + /* SDMMC1 (SD/MMC) */ + mmc@3400000 { + status = "okay"; + bus-width = <4>; + cd-gpios = <&gpio TEGRA194_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>; + disable-wp; + vmmc-supply = <&vdd_3v3_sd>; + }; + + padctl@3520000 { + avdd-usb-supply = <&vdd_usb_3v3>; + vclamp-usb-supply = <&vdd_1v8ao>; + + ports { + usb2-1 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb2-3 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb3-0 { + vbus-supply = <&vdd_5v0_sys>; + }; + + usb3-3 { + vbus-supply = <&vdd_5v0_sys>; + }; + }; + }; + + rtc@c2a0000 { + status = "okay"; + }; + + pmc@c360000 { + nvidia,invert-interrupt; + }; + }; + + bpmp { + i2c { + status = "okay"; + + pmic: pmic@3c { + compatible = "maxim,max20024"; + reg = <0x3c>; + + interrupt-parent = <&pmc>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&max20024_default>; + + max20024_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + }; + + gpio1 { + pins = "gpio1"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; + }; + + gpio2 { + pins = "gpio2"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; + }; + + gpio3 { + pins = "gpio3"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>; + }; + + gpio4 { + pins = "gpio4"; + function = "32k-out1"; + drive-push-pull = <1>; + }; + + gpio6 { + pins = "gpio6"; + function = "gpio"; + drive-push-pull = <1>; + }; + + gpio7 { + pins = "gpio7"; + function = "gpio"; + drive-push-pull = <0>; + }; + }; + + fps { + fps0 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps1 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,shutdown-fps-time-period-us = <640>; + maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>; + }; + + fps2 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + }; + + regulators { + in-sd0-supply = <&vdd_5v0_sys>; + in-sd1-supply = <&vdd_5v0_sys>; + in-sd2-supply = <&vdd_5v0_sys>; + in-sd3-supply = <&vdd_5v0_sys>; + in-sd4-supply = <&vdd_5v0_sys>; + + in-ldo0-1-supply = <&vdd_5v0_sys>; + in-ldo2-supply = <&vdd_5v0_sys>; + in-ldo3-5-supply = <&vdd_5v0_sys>; + in-ldo4-6-supply = <&vdd_5v0_sys>; + in-ldo7-8-supply = <&vdd_1v8ls>; + + vdd_1v0: sd0 { + regulator-name = "VDDIO_SYS_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8hs: sd1 { + regulator-name = "VDDIO_SYS_1V8HS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8ls: sd2 { + regulator-name = "VDDIO_SYS_1V8LS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8ao: sd3 { + regulator-name = "VDDIO_AO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + sd4 { + regulator-name = "VDD_DDR_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo0 { + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "VDDIO_AO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo3 { + regulator-name = "VDD_EMMC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vdd_usb_3v3: ldo5 { + regulator-name = "VDD_USB_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6 { + regulator-name = "VDD_SDIO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "AVDD_CSI_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + }; + }; + }; + + vdd_3v3_sd: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA194_MAIN_GPIO(G, 2) GPIO_ACTIVE_HIGH>; + regulator-boot-on; + enable-active-high; + }; +}; diff --git a/dts/src/arm64/nvidia/tegra194.dtsi b/dts/src/arm64/nvidia/tegra194.dtsi index 4bc187a4ea..48160f4800 100644 --- a/dts/src/arm64/nvidia/tegra194.dtsi +++ b/dts/src/arm64/nvidia/tegra194.dtsi @@ -16,7 +16,7 @@ #size-cells = <2>; /* control backbone */ - cbb@0 { + bus@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -59,6 +59,9 @@ clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref"; resets = <&bpmp TEGRA194_RESET_EQOS>; reset-names = "eqos"; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_EQOSR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_EQOSW &emc>; + interconnect-names = "dma-mem", "write"; status = "disabled"; snps,write-requests = <1>; @@ -141,8 +144,8 @@ pinmux: pinmux@2430000 { compatible = "nvidia,tegra194-pinmux"; - reg = <0x2430000 0x17000 - 0xc300000 0x4000>; + reg = <0x2430000 0x17000>, + <0xc300000 0x4000>; status = "okay"; @@ -176,6 +179,8 @@ reg = <0x02c00000 0x100000>, <0x02b80000 0x040000>, <0x01700000 0x100000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + #interconnect-cells = <1>; status = "disabled"; #address-cells = <2>; @@ -209,6 +214,8 @@ clocks = <&bpmp TEGRA194_CLK_EMC>; clock-names = "emc"; + #interconnect-cells = <0>; + nvidia,bpmp = <&bpmp>; }; }; @@ -449,14 +456,17 @@ #pwm-cells = <2>; }; - sdmmc1: sdhci@3400000 { - compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci"; + sdmmc1: mmc@3400000 { + compatible = "nvidia,tegra194-sdhci"; reg = <0x03400000 0x10000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_SDMMC1>; clock-names = "sdhci"; resets = <&bpmp TEGRA194_RESET_SDMMC1>; reset-names = "sdhci"; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRA &emc>, + <&mc TEGRA194_MEMORY_CLIENT_SDMMCWA &emc>; + interconnect-names = "dma-mem", "write"; nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; nvidia,pad-autocal-pull-down-offset-3v3-timeout = @@ -471,14 +481,17 @@ status = "disabled"; }; - sdmmc3: sdhci@3440000 { - compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci"; + sdmmc3: mmc@3440000 { + compatible = "nvidia,tegra194-sdhci"; reg = <0x03440000 0x10000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_SDMMC3>; clock-names = "sdhci"; resets = <&bpmp TEGRA194_RESET_SDMMC3>; reset-names = "sdhci"; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_SDMMCW &emc>; + interconnect-names = "dma-mem", "write"; nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>; nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>; nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>; @@ -494,8 +507,8 @@ status = "disabled"; }; - sdmmc4: sdhci@3460000 { - compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci"; + sdmmc4: mmc@3460000 { + compatible = "nvidia,tegra194-sdhci"; reg = <0x03460000 0x10000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_SDMMC4>; @@ -506,6 +519,9 @@ <&bpmp TEGRA194_CLK_PLLC4>; resets = <&bpmp TEGRA194_RESET_SDMMC4>; reset-names = "sdhci"; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_SDMMCRAB &emc>, + <&mc TEGRA194_MEMORY_CLIENT_SDMMCWAB &emc>; + interconnect-names = "dma-mem", "write"; nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>; nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>; nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>; @@ -534,6 +550,9 @@ <&bpmp TEGRA194_RESET_HDA2HDMICODEC>; reset-names = "hda", "hda2codec_2x", "hda2hdmi"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_HDAR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_HDAW &emc>; + interconnect-names = "dma-mem", "write"; status = "disabled"; }; @@ -669,8 +688,7 @@ reg-names = "hcd", "fpci"; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>, <&bpmp TEGRA194_CLK_XUSB_FALCON>, @@ -981,10 +999,7 @@ reg-names = "security", "gpio"; reg = <0xc2f0000 0x1000>, <0xc2f1000 0x1000>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1017,12 +1032,13 @@ }; host1x@13e00000 { - compatible = "nvidia,tegra194-host1x", "simple-bus"; + compatible = "nvidia,tegra194-host1x"; reg = <0x13e00000 0x10000>, <0x13e10000 0x10000>; reg-names = "hypervisor", "vm"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "syncpt", "host1x"; clocks = <&bpmp TEGRA194_CLK_HOST1X>; clock-names = "host1x"; resets = <&bpmp TEGRA194_RESET_HOST1X>; @@ -1032,9 +1048,11 @@ #size-cells = <1>; ranges = <0x15000000 0x15000000 0x01000000>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_HOST1XDMAR &emc>; + interconnect-names = "dma-mem"; display-hub@15200000 { - compatible = "nvidia,tegra194-display", "simple-bus"; + compatible = "nvidia,tegra194-display"; reg = <0x15200000 0x00040000>; resets = <&bpmp TEGRA194_RESET_NVDISPLAY0_MISC>, <&bpmp TEGRA194_RESET_NVDISPLAY0_WGRP0>, @@ -1067,6 +1085,9 @@ reset-names = "dc"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; nvidia,head = <0>; @@ -1082,6 +1103,9 @@ reset-names = "dc"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; nvidia,head = <1>; @@ -1097,6 +1121,9 @@ reset-names = "dc"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; nvidia,head = <2>; @@ -1112,6 +1139,9 @@ reset-names = "dc"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVDISPLAYR1 &emc>; + interconnect-names = "dma-mem", "read-1"; nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>; nvidia,head = <3>; @@ -1128,6 +1158,9 @@ reset-names = "vic"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_VIC>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_VICSRD &emc>, + <&mc TEGRA194_MEMORY_CLIENT_VICSWR &emc>; + interconnect-names = "dma-mem", "write"; }; dpaux0: dpaux@155c0000 { @@ -1362,15 +1395,49 @@ nvidia,interface = <3>; }; }; + + gpu@17000000 { + compatible = "nvidia,gv11b"; + reg = <0x17000000 0x10000000>, + <0x18000000 0x10000000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "stall", "nonstall"; + clocks = <&bpmp TEGRA194_CLK_GPCCLK>, + <&bpmp TEGRA194_CLK_GPU_PWR>, + <&bpmp TEGRA194_CLK_FUSE>; + clock-names = "gpu", "pwr", "fuse"; + resets = <&bpmp TEGRA194_RESET_GPU>; + reset-names = "gpu"; + dma-coherent; + + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_NVL1R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL1RHP &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL1W &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL2R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL2RHP &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL2W &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL3R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL3RHP &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL3W &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL4R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL4RHP &emc>, + <&mc TEGRA194_MEMORY_CLIENT_NVL4W &emc>; + interconnect-names = "dma-mem", "read-0-hp", "write-0", + "read-1", "read-1-hp", "write-1", + "read-2", "read-2-hp", "write-2", + "read-3", "read-3-hp", "write-3"; + }; }; pcie@14100000 { compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; - reg = <0x00 0x14100000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x30000000 0x0 0x00040000 /* configuration space (256K) */ - 0x00 0x30040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg = <0x00 0x14100000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x30000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x30040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K) */ reg-names = "appl", "config", "atu_dma", "dbi"; status = "disabled"; @@ -1389,8 +1456,8 @@ <&bpmp TEGRA194_RESET_PEX0_CORE_1>; reset-names = "apb", "core"; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ interrupt-names = "intr", "msi"; #interrupt-cells = <1>; @@ -1404,18 +1471,23 @@ nvidia,aspm-l0s-entrance-latency-us = <3>; bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x30100000 0x0 0x30100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc3000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000 /* prefetchable memory (768MB) */ - 0x82000000 0x0 0x40000000 0x12 0x30000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + + ranges = <0x43000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */ + <0x02000000 0x0 0x40000000 0x12 0x30000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB - 64 KiB) */ + <0x01000000 0x0 0x00000000 0x12 0x3fff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ + + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE1R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE1W &emc>; + interconnect-names = "read", "write"; }; pcie@14120000 { compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; - reg = <0x00 0x14120000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x32000000 0x0 0x00040000 /* configuration space (256K) */ - 0x00 0x32040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg = <0x00 0x14120000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x32000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x32040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K) */ reg-names = "appl", "config", "atu_dma", "dbi"; status = "disabled"; @@ -1434,8 +1506,8 @@ <&bpmp TEGRA194_RESET_PEX0_CORE_2>; reset-names = "apb", "core"; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ interrupt-names = "intr", "msi"; #interrupt-cells = <1>; @@ -1449,18 +1521,23 @@ nvidia,aspm-l0s-entrance-latency-us = <3>; bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x32100000 0x0 0x32100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc3000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000 /* prefetchable memory (768MB) */ - 0x82000000 0x0 0x40000000 0x12 0x70000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + + ranges = <0x43000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */ + <0x02000000 0x0 0x40000000 0x12 0x70000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB - 64 KiB) */ + <0x01000000 0x0 0x00000000 0x12 0x7fff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ + + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE2AR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE2AW &emc>; + interconnect-names = "read", "write"; }; pcie@14140000 { compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; - reg = <0x00 0x14140000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x34000000 0x0 0x00040000 /* configuration space (256K) */ - 0x00 0x34040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg = <0x00 0x14140000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x34000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x34040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K) */ reg-names = "appl", "config", "atu_dma", "dbi"; status = "disabled"; @@ -1479,8 +1556,8 @@ <&bpmp TEGRA194_RESET_PEX0_CORE_3>; reset-names = "apb", "core"; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ interrupt-names = "intr", "msi"; #interrupt-cells = <1>; @@ -1494,18 +1571,23 @@ nvidia,aspm-l0s-entrance-latency-us = <3>; bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x34100000 0x0 0x34100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc3000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000 /* prefetchable memory (768MB) */ - 0x82000000 0x0 0x40000000 0x12 0xb0000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + + ranges = <0x43000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000>, /* prefetchable memory (768 MiB) */ + <0x02000000 0x0 0x40000000 0x12 0xb0000000 0x0 0x0fff0000>, /* non-prefetchable memory (256 MiB + 64 KiB) */ + <0x01000000 0x0 0x00000000 0x12 0xbfff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ + + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE3R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE3W &emc>; + interconnect-names = "read", "write"; }; pcie@14160000 { compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; - reg = <0x00 0x14160000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x36000000 0x0 0x00040000 /* configuration space (256K) */ - 0x00 0x36040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x36000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */ reg-names = "appl", "config", "atu_dma", "dbi"; status = "disabled"; @@ -1524,8 +1606,8 @@ <&bpmp TEGRA194_RESET_PEX0_CORE_4>; reset-names = "apb", "core"; - interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ interrupt-names = "intr", "msi"; #interrupt-cells = <1>; @@ -1539,18 +1621,23 @@ nvidia,aspm-l0s-entrance-latency-us = <3>; bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x36100000 0x0 0x36100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc3000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ - 0x82000000 0x0 0x40000000 0x17 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + + ranges = <0x43000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */ + <0x02000000 0x0 0x40000000 0x17 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */ + <0x01000000 0x0 0x00000000 0x17 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ + + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>; + interconnect-names = "read", "write"; }; pcie@14180000 { compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; - reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x38000000 0x0 0x00040000 /* configuration space (256K) */ - 0x00 0x38040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x38000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */ reg-names = "appl", "config", "atu_dma", "dbi"; status = "disabled"; @@ -1569,8 +1656,8 @@ <&bpmp TEGRA194_RESET_PEX0_CORE_0>; reset-names = "apb", "core"; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ interrupt-names = "intr", "msi"; #interrupt-cells = <1>; @@ -1584,18 +1671,23 @@ nvidia,aspm-l0s-entrance-latency-us = <3>; bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc3000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ - 0x82000000 0x0 0x40000000 0x1b 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + + ranges = <0x43000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */ + <0x02000000 0x0 0x40000000 0x1b 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */ + <0x01000000 0x0 0x00000000 0x1b 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ + + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>; + interconnect-names = "read", "write"; }; pcie@141a0000 { compatible = "nvidia,tegra194-pcie"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; - reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x3a000000 0x0 0x00040000 /* configuration space (256K) */ - 0x00 0x3a040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K) */ reg-names = "appl", "config", "atu_dma", "dbi"; status = "disabled"; @@ -1611,15 +1703,15 @@ pinctrl-0 = <&pex_rst_c5_out_state>, <&clkreq_c5_bi_dir_state>; clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>, - <&bpmp TEGRA194_CLK_PEX1_CORE_5M>; + <&bpmp TEGRA194_CLK_PEX1_CORE_5M>; clock-names = "core", "core_m"; resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, <&bpmp TEGRA194_RESET_PEX1_CORE_5>; reset-names = "apb", "core"; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ - <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ interrupt-names = "intr", "msi"; nvidia,bpmp = <&bpmp 5>; @@ -1633,18 +1725,23 @@ nvidia,aspm-l0s-entrance-latency-us = <3>; bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x3a100000 0x0 0x3a100000 0x0 0x00100000 /* downstream I/O (1MB) */ - 0xc3000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ - 0x82000000 0x0 0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + + ranges = <0x43000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000>, /* prefetchable memory (13 GiB) */ + <0x02000000 0x0 0x40000000 0x1f 0x40000000 0x0 0xbfff0000>, /* non-prefetchable memory (3 GiB - 64 KiB) */ + <0x01000000 0x0 0x00000000 0x1f 0xffff0000 0x0 0x00010000>; /* downstream I/O (64 KiB) */ + + interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>, + <&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>; + interconnect-names = "read", "write"; }; pcie_ep@14160000 { compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; - reg = <0x00 0x14160000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x36040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x36080000 0x0 0x00040000 /* DBI reg space (256K) */ - 0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg = <0x00 0x14160000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x36040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x36080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x14 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ reg-names = "appl", "atu_dma", "dbi", "addr_space"; status = "disabled"; @@ -1673,10 +1770,10 @@ pcie_ep@14180000 { compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; - reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x38040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x38080000 0x0 0x00040000 /* DBI reg space (256K) */ - 0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg = <0x00 0x14180000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x38040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x38080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x18 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ reg-names = "appl", "atu_dma", "dbi", "addr_space"; status = "disabled"; @@ -1705,10 +1802,10 @@ pcie_ep@141a0000 { compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep"; power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; - reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */ - 0x00 0x3a040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ - 0x00 0x3a080000 0x0 0x00040000 /* DBI reg space (256K) */ - 0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>, /* DBI reg space (256K) */ + <0x1c 0x00000000 0x4 0x00000000>; /* Address Space (16G) */ reg-names = "appl", "atu_dma", "dbi", "addr_space"; status = "disabled"; @@ -1737,22 +1834,20 @@ nvidia,aspm-l0s-entrance-latency-us = <3>; }; - sysram@40000000 { + sram@40000000 { compatible = "nvidia,tegra194-sysram", "mmio-sram"; reg = <0x0 0x40000000 0x0 0x50000>; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x40000000 0x50000>; - cpu_bpmp_tx: shmem@4e000 { - compatible = "nvidia,tegra194-bpmp-shmem"; + cpu_bpmp_tx: sram@4e000 { reg = <0x4e000 0x1000>; label = "cpu-bpmp-tx"; pool; }; - cpu_bpmp_rx: shmem@4f000 { - compatible = "nvidia,tegra194-bpmp-shmem"; + cpu_bpmp_rx: sram@4f000 { reg = <0x4f000 0x1000>; label = "cpu-bpmp-rx"; pool; @@ -1767,6 +1862,11 @@ #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; + interconnects = <&mc TEGRA194_MEMORY_CLIENT_BPMPR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_BPMPW &emc>, + <&mc TEGRA194_MEMORY_CLIENT_BPMPDMAR &emc>, + <&mc TEGRA194_MEMORY_CLIENT_BPMPDMAW &emc>; + interconnect-names = "read", "write", "dma-mem", "dma-write"; bpmp_i2c: i2c { compatible = "nvidia,tegra186-bpmp-i2c"; @@ -1782,6 +1882,8 @@ }; cpus { + compatible = "nvidia,tegra194-ccplex"; + nvidia,bpmp = <&bpmp>; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/nvidia/tegra210-p2180.dtsi b/dts/src/arm64/nvidia/tegra210-p2180.dtsi index cc6ed45a2b..6a4b50aaa2 100644 --- a/dts/src/arm64/nvidia/tegra210-p2180.dtsi +++ b/dts/src/arm64/nvidia/tegra210-p2180.dtsi @@ -17,7 +17,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x1 0x0>; }; @@ -274,8 +274,8 @@ reg = <0x50>; vcc-supply = <&vdd_1v8>; - address-bits = <8>; - page-size = <8>; + address-width = <8>; + pagesize = <8>; size = <256>; read-only; }; @@ -293,24 +293,17 @@ }; /* eMMC */ - sdhci@700b0600 { + mmc@700b0600 { status = "okay"; bus-width = <8>; non-removable; vqmmc-supply = <&vdd_1v8>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; cpus { @@ -342,18 +335,15 @@ method = "smc"; }; - regulators { - vdd_gpu: regulator@100 { - compatible = "pwm-regulator"; - reg = <100>; - pwms = <&pwm 1 4880>; - regulator-name = "VDD_GPU"; - regulator-min-microvolt = <710000>; - regulator-max-microvolt = <1320000>; - enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; - regulator-ramp-delay = <80>; - regulator-enable-ramp-delay = <2000>; - regulator-settling-time-us = <160>; - }; + vdd_gpu: regulator@100 { + compatible = "pwm-regulator"; + pwms = <&pwm 1 4880>; + regulator-name = "VDD_GPU"; + regulator-min-microvolt = <710000>; + regulator-max-microvolt = <1320000>; + enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; + regulator-ramp-delay = <80>; + regulator-enable-ramp-delay = <2000>; + regulator-settling-time-us = <160>; }; }; diff --git a/dts/src/arm64/nvidia/tegra210-p2371-2180.dts b/dts/src/arm64/nvidia/tegra210-p2371-2180.dts index ea0e1efa69..56adf287a8 100644 --- a/dts/src/arm64/nvidia/tegra210-p2371-2180.dts +++ b/dts/src/arm64/nvidia/tegra210-p2371-2180.dts @@ -87,8 +87,8 @@ reg = <0x57>; vcc-supply = <&vdd_1v8>; - address-bits = <8>; - page-size = <8>; + address-width = <8>; + pagesize = <8>; size = <256>; read-only; }; @@ -122,7 +122,7 @@ status = "okay"; }; - agic@702f9000 { + interrupt-controller@702f9000 { status = "okay"; }; }; diff --git a/dts/src/arm64/nvidia/tegra210-p2530.dtsi b/dts/src/arm64/nvidia/tegra210-p2530.dtsi index d0dc039237..58aa051896 100644 --- a/dts/src/arm64/nvidia/tegra210-p2530.dtsi +++ b/dts/src/arm64/nvidia/tegra210-p2530.dtsi @@ -14,7 +14,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0xc0000000>; }; @@ -34,23 +34,16 @@ }; /* eMMC */ - sdhci@700b0600 { + mmc@700b0600 { status = "okay"; bus-width = <8>; non-removable; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; cpus { diff --git a/dts/src/arm64/nvidia/tegra210-p2597.dtsi b/dts/src/arm64/nvidia/tegra210-p2597.dtsi index b57d837d5f..e18e1a9a30 100644 --- a/dts/src/arm64/nvidia/tegra210-p2597.dtsi +++ b/dts/src/arm64/nvidia/tegra210-p2597.dtsi @@ -27,8 +27,8 @@ sor@54580000 { status = "okay"; - avdd-io-supply = <&avdd_1v05>; - vdd-pll-supply = <&vdd_1v8>; + avdd-io-hdmi-dp-supply = <&avdd_1v05>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8>; hdmi-supply = <&vdd_hdmi>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; @@ -1323,6 +1323,14 @@ #gpio-cells = <2>; gpio-controller; }; + + exp2: gpio@77 { + compatible = "ti,tca9539"; + reg = <0x77>; + + #gpio-cells = <2>; + gpio-controller; + }; }; /* HDMI DDC */ @@ -1461,17 +1469,17 @@ usb2-0 { status = "okay"; vbus-supply = <&vdd_usb_vbus_otg>; + usb-role-switch; mode = "otg"; - usb-role-switch; connector { - compatible = "usb-b-connector", - "gpio-usb-b-connector"; + compatible = "gpio-usb-b-connector", + "usb-b-connector"; label = "micro-USB"; type = "micro"; - vbus-gpio = <&gpio TEGRA_GPIO(Z, 0) - GPIO_ACTIVE_LOW>; - id-gpio = <&pmic 0 0>; + vbus-gpios = <&gpio TEGRA_GPIO(Z, 0) + GPIO_ACTIVE_LOW>; + id-gpios = <&pmic 0 GPIO_ACTIVE_HIGH>; }; }; @@ -1505,7 +1513,7 @@ }; /* MMC/SD */ - sdhci@700b0000 { + mmc@700b0000 { status = "okay"; bus-width = <4>; @@ -1523,152 +1531,6 @@ hvdd-usb-supply = <&vdd_1v8>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_sys_mux: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "VDD_SYS_MUX"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_5v0_sys: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "VDD_5V0_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_sys_mux>; - }; - - vdd_3v3_sys: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "VDD_3V3_SYS"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_sys_mux>; - - regulator-enable-ramp-delay = <160>; - regulator-disable-ramp-delay = <10000>; - }; - - vdd_5v0_io: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "VDD_5V0_IO_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vdd_3v3_sd: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "VDD_3V3_SD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - - regulator-enable-ramp-delay = <472>; - regulator-disable-ramp-delay = <4880>; - }; - - vdd_dsi_csi: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "AVDD_DSI_CSI_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - vin-supply = <&vdd_sys_1v2>; - }; - - vdd_3v3_dis: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "VDD_DIS_3V3_LCD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_3v3_sys>; - }; - - vdd_1v8_dis: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "VDD_LCD_1V8_DIS"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - gpio = <&exp1 14 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_1v8>; - }; - - vdd_5v0_rtl: regulator@8 { - compatible = "regulator-fixed"; - reg = <8>; - regulator-name = "RTL_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; - - vdd_usb_vbus: regulator@9 { - compatible = "regulator-fixed"; - reg = <9>; - regulator-name = "USB_VBUS_EN1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; - - vdd_usb_vbus_otg: regulator@11 { - compatible = "regulator-fixed"; - reg = <9>; - regulator-name = "USB_VBUS_EN0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; - - vdd_hdmi: regulator@10 { - compatible = "regulator-fixed"; - reg = <10>; - regulator-name = "VDD_HDMI_5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&exp1 12 GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&vdd_5v0_sys>; - }; - }; - gpio-keys { compatible = "gpio-keys"; label = "gpio-keys"; @@ -1692,4 +1554,162 @@ linux,code = <KEY_VOLUMEUP>; }; }; + + vdd_sys_mux: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VDD_SYS_MUX"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_5v0_sys: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_sys_mux>; + }; + + vdd_3v3_sys: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_sys_mux>; + + regulator-enable-ramp-delay = <160>; + regulator-disable-ramp-delay = <10000>; + }; + + vdd_5v0_io: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "VDD_5V0_IO_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_sd: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "VDD_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + + regulator-enable-ramp-delay = <472>; + regulator-disable-ramp-delay = <4880>; + }; + + vdd_dsi_csi: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "AVDD_DSI_CSI_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&vdd_sys_1v2>; + }; + + vdd_3v3_dis: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "VDD_DIS_3V3_LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_1v8_dis: regulator@7 { + compatible = "regulator-fixed"; + regulator-name = "VDD_LCD_1V8_DIS"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + gpio = <&exp1 14 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_1v8>; + }; + + vdd_5v0_rtl: regulator@8 { + compatible = "regulator-fixed"; + regulator-name = "RTL_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb_vbus: regulator@9 { + compatible = "regulator-fixed"; + regulator-name = "USB_VBUS_EN1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_usb_vbus_otg: regulator@11 { + compatible = "regulator-fixed"; + regulator-name = "USB_VBUS_EN0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_hdmi: regulator@10 { + compatible = "regulator-fixed"; + regulator-name = "VDD_HDMI_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&exp1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_sys>; + }; + + vdd_cam_1v2: regulator@11 { + compatible = "regulator-fixed"; + regulator-name = "vdd-cam-1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&exp2 10 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_cam_2v8: regulator@12 { + compatible = "regulator-fixed"; + regulator-name = "vdd-cam-2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&exp1 13 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; + + vdd_cam_1v8: regulator@13 { + compatible = "regulator-fixed"; + regulator-name = "vdd-cam-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&exp2 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_3v3_sys>; + }; }; diff --git a/dts/src/arm64/nvidia/tegra210-p2894.dtsi b/dts/src/arm64/nvidia/tegra210-p2894.dtsi index 88a4b9333d..41beab626d 100644 --- a/dts/src/arm64/nvidia/tegra210-p2894.dtsi +++ b/dts/src/arm64/nvidia/tegra210-p2894.dtsi @@ -16,7 +16,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x0 0xc0000000>; }; @@ -1328,7 +1328,7 @@ status = "okay"; clock-frequency = <400000>; - max77620: max77620@3c { + pmic: pmic@3c { compatible = "maxim,max77620"; reg = <0x3c>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; @@ -1343,12 +1343,12 @@ pinctrl-0 = <&max77620_default>; max77620_default: pinmux@0 { - pin_gpio0 { + gpio0 { pins = "gpio0"; function = "gpio"; }; - pin_gpio1 { + gpio1 { pins = "gpio1"; function = "fps-out"; drive-push-pull = <1>; @@ -1357,37 +1357,37 @@ maxim,active-fps-power-down-slot = <0>; }; - pin_gpio2_3 { - pins = "gpio2", "gpio3"; + gpio2 { + pins = "gpio2"; function = "fps-out"; drive-open-drain = <1>; maxim,active-fps-source = <MAX77620_FPS_SRC_0>; }; - pin_gpio4 { + gpio3 { + pins = "gpio3"; + function = "fps-out"; + drive-open-drain = <1>; + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + }; + + gpio4 { pins = "gpio4"; function = "32k-out1"; }; - pin_gpio5_6_7 { + gpio5_6_7 { pins = "gpio5", "gpio6", "gpio7"; function = "gpio"; drive-push-pull = <1>; }; - - pin_gpio2 { - maxim,active-fps-source = <MAX77620_FPS_SRC_0>; - }; - - pin_gpio3 { - maxim,active-fps-source = <MAX77620_FPS_SRC_0>; - }; }; - spmic-default-output-high { + gpio@0 { gpio-hog; output-high; - gpios = <2 GPIO_ACTIVE_HIGH 7 GPIO_ACTIVE_HIGH>; + gpios = <2 GPIO_ACTIVE_HIGH>, + <7 GPIO_ACTIVE_HIGH>; }; fps { @@ -1580,23 +1580,16 @@ status = "okay"; }; - sdhci@700b0600 { + mmc@700b0600 { bus-width = <8>; non-removable; status = "okay"; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; gpio-keys { @@ -1642,223 +1635,198 @@ method = "smc"; }; - regulators { - compatible = "simple-bus"; - device_type = "fixed-regulators"; - #address-cells = <1>; - #size-cells = <0>; - - battery_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vdd-ac-bat"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + battery_reg: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-ac-bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - vdd_3v3: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "vdd-3v3"; - regulator-enable-ramp-delay = <160>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - - gpio = <&max77620 3 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + vdd_3v3: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vdd-3v3"; + regulator-enable-ramp-delay = <160>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; - max77620_gpio7: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "max77620-gpio7"; - regulator-enable-ramp-delay = <240>; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - vin-supply = <&max77620_ldo0>; - regulator-always-on; - regulator-boot-on; - - gpio = <&max77620 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - lcd_bl_en: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "lcd-bl-en"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; + max77620_gpio7: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "max77620-gpio7"; + regulator-enable-ramp-delay = <240>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&max77620_ldo0>; + regulator-always-on; + regulator-boot-on; + + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + lcd_bl_en: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-bl-en"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; - en_vdd_sd: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "en-vdd-sd"; - regulator-enable-ramp-delay = <472>; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_3v3>; - - gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + gpio = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - en_vdd_cam: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "en-vdd-cam"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + en_vdd_sd: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "en-vdd-sd"; + regulator-enable-ramp-delay = <472>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_3v3>; - gpio = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + gpio = <&gpio TEGRA_GPIO(Z, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vdd_sys_boost: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "vdd-sys-boost"; - regulator-enable-ramp-delay = <3090>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - - gpio = <&max77620 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + en_vdd_cam: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "en-vdd-cam"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; - vdd_hdmi: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "vdd-hdmi"; - regulator-enable-ramp-delay = <468>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vdd_sys_boost>; - regulator-boot-on; - - gpio = <&gpio TEGRA_GPIO(CC, 7) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + gpio = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - en_vdd_cpu_fixed: regulator@8 { - compatible = "regulator-fixed"; - reg = <8>; - regulator-name = "vdd-cpu-fixed"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; + vdd_sys_boost: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "vdd-sys-boost"; + regulator-enable-ramp-delay = <3090>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; - vdd_aux_3v3: regulator@9 { - compatible = "regulator-fixed"; - reg = <9>; - regulator-name = "aux-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vdd_snsr_pm: regulator@10 { - compatible = "regulator-fixed"; - reg = <10>; - regulator-name = "snsr_pm"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + vdd_hdmi: regulator@7 { + compatible = "regulator-fixed"; + regulator-name = "vdd-hdmi"; + regulator-enable-ramp-delay = <468>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_sys_boost>; + regulator-boot-on; + + gpio = <&gpio TEGRA_GPIO(CC, 7) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - enable-active-high; - }; + en_vdd_cpu_fixed: regulator@8 { + compatible = "regulator-fixed"; + regulator-name = "vdd-cpu-fixed"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; - vdd_usb_5v0: regulator@11 { - compatible = "regulator-fixed"; - reg = <11>; - status = "disabled"; - regulator-name = "vdd-usb-5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vdd_3v3>; + vdd_aux_3v3: regulator@9 { + compatible = "regulator-fixed"; + regulator-name = "aux-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; - enable-active-high; - }; + vdd_snsr_pm: regulator@10 { + compatible = "regulator-fixed"; + regulator-name = "snsr_pm"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; - vdd_cdc_1v2_aud: regulator@101 { - compatible = "regulator-fixed"; - reg = <101>; - status = "disabled"; - regulator-name = "vdd_cdc_1v2_aud"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - startup-delay-us = <250000>; + enable-active-high; + }; - enable-active-high; - }; + vdd_usb_5v0: regulator@11 { + compatible = "regulator-fixed"; + status = "disabled"; + regulator-name = "vdd-usb-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_3v3>; - vdd_disp_3v0: regulator@12 { - compatible = "regulator-fixed"; - reg = <12>; - regulator-name = "vdd-disp-3v0"; - regulator-enable-ramp-delay = <232>; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - - gpio = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + enable-active-high; + }; - vdd_fan: regulator@13 { - compatible = "regulator-fixed"; - reg = <13>; - regulator-name = "vdd-fan"; - regulator-enable-ramp-delay = <284>; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + vdd_cdc_1v2_aud: regulator@101 { + compatible = "regulator-fixed"; + status = "disabled"; + regulator-name = "vdd_cdc_1v2_aud"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + startup-delay-us = <250000>; - gpio = <&gpio TEGRA_GPIO(E, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + enable-active-high; + }; - usb_vbus1: regulator@14 { - compatible = "regulator-fixed"; - reg = <14>; - regulator-name = "usb-vbus1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + vdd_disp_3v0: regulator@12 { + compatible = "regulator-fixed"; + regulator-name = "vdd-disp-3v0"; + regulator-enable-ramp-delay = <232>; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; - gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - }; + gpio = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - usb_vbus2: regulator@15 { - compatible = "regulator-fixed"; - reg = <15>; - regulator-name = "usb-vbus2"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + vdd_fan: regulator@13 { + compatible = "regulator-fixed"; + regulator-name = "vdd-fan"; + regulator-enable-ramp-delay = <284>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - }; + gpio = <&gpio TEGRA_GPIO(E, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - vdd_3v3_eth: regulator@16 { - compatible = "regulator-fixed"; - reg = <16>; - regulator-name = "vdd-3v3-eth-a02"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; - enable-active-high; - gpio-open-drain; - }; + usb_vbus1: regulator@14 { + compatible = "regulator-fixed"; + regulator-name = "usb-vbus1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + }; + + usb_vbus2: regulator@15 { + compatible = "regulator-fixed"; + regulator-name = "usb-vbus2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio TEGRA_GPIO(CC, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; + }; + + vdd_3v3_eth: regulator@16 { + compatible = "regulator-fixed"; + regulator-name = "vdd-3v3-eth-a02"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + gpio = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + gpio-open-drain; }; }; diff --git a/dts/src/arm64/nvidia/tegra210-p3450-0000.dts b/dts/src/arm64/nvidia/tegra210-p3450-0000.dts index 9bc52fdb39..2282ea1c62 100644 --- a/dts/src/arm64/nvidia/tegra210-p3450-0000.dts +++ b/dts/src/arm64/nvidia/tegra210-p3450-0000.dts @@ -22,7 +22,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x0 0x80000000 0x1 0x0>; }; @@ -64,6 +64,16 @@ status = "okay"; }; + vi@54080000 { + status = "okay"; + + avdd-dsi-csi-supply = <&vdd_sys_1v2>; + + csi@838 { + status = "okay"; + }; + }; + sor@54540000 { status = "okay"; @@ -77,8 +87,8 @@ sor@54580000 { status = "okay"; - avdd-io-supply = <&avdd_1v05>; - vdd-pll-supply = <&vdd_1v8>; + avdd-io-hdmi-dp-supply = <&avdd_1v05>; + vdd-hdmi-dp-pll-supply = <&vdd_1v8>; hdmi-supply = <&vdd_hdmi>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; @@ -101,6 +111,22 @@ status = "okay"; }; + pinmux@700008d4 { + dvfs_pwm_active_state: dvfs_pwm_active { + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + + dvfs_pwm_inactive_state: dvfs_pwm_inactive { + dvfs_pwm_pbb1 { + nvidia,pins = "dvfs_pwm_pbb1"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + }; + }; + /* debug port */ serial@70006000 { status = "okay"; @@ -119,8 +145,8 @@ reg = <0x50>; vcc-supply = <&vdd_1v8>; - address-bits = <8>; - page-size = <8>; + address-width = <8>; + pagesize = <8>; size = <256>; read-only; }; @@ -130,8 +156,8 @@ reg = <0x57>; vcc-supply = <&vdd_1v8>; - address-bits = <8>; - page-size = <8>; + address-width = <8>; + pagesize = <8>; size = <256>; read-only; }; @@ -513,15 +539,15 @@ usb2-0 { status = "okay"; mode = "peripheral"; - usb-role-switch; + connector { - compatible = "usb-b-connector", - "gpio-usb-b-connector"; + compatible = "gpio-usb-b-connector", + "usb-b-connector"; label = "micro-USB"; type = "micro"; - vbus-gpio = <&gpio TEGRA_GPIO(CC, 4) - GPIO_ACTIVE_LOW>; + vbus-gpios = <&gpio TEGRA_GPIO(CC, 4) + GPIO_ACTIVE_LOW>; }; }; @@ -543,7 +569,7 @@ }; }; - sdhci@700b0000 { + mmc@700b0000 { status = "okay"; bus-width = <4>; @@ -553,15 +579,7 @@ vmmc-supply = <&vdd_3v3_sd>; }; - usb@700d0000 { - status = "okay"; - phys = <µ_b>; - phy-names = "usb2-0"; - avddio-usb-supply = <&vdd_3v3_sys>; - hvdd-usb-supply = <&vdd_1v8>; - }; - - sdhci@700b0400 { + mmc@700b0400 { status = "okay"; bus-width = <4>; @@ -574,17 +592,39 @@ wakeup-source; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + usb@700d0000 { + status = "okay"; + phys = <µ_b>; + phy-names = "usb2-0"; + avddio-usb-supply = <&vdd_3v3_sys>; + hvdd-usb-supply = <&vdd_1v8>; + }; + + clock@70110000 { + status = "okay"; - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + nvidia,cf = <6>; + nvidia,ci = <0>; + nvidia,cg = <2>; + nvidia,droop-ctrl = <0x00000f00>; + nvidia,force-mode = <1>; + nvidia,sample-rate = <25000>; + + nvidia,pwm-min-microvolts = <708000>; + nvidia,pwm-period-nanoseconds = <2500>; /* 2.5us */ + nvidia,pwm-to-pmic; + nvidia,pwm-tristate-microvolts = <1000000>; + nvidia,pwm-voltage-step-microvolts = <19200>; + + pinctrl-names = "dvfs_pwm_enable", "dvfs_pwm_disable"; + pinctrl-0 = <&dvfs_pwm_active_state>; + pinctrl-1 = <&dvfs_pwm_inactive_state>; + }; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; cpus { @@ -698,120 +738,109 @@ method = "smc"; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + vdd_5v0_sys: regulator@0 { + compatible = "regulator-fixed"; - vdd_5v0_sys: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; + regulator-name = "VDD_5V0_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; - regulator-name = "VDD_5V0_SYS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; + vdd_3v3_sys: regulator@1 { + compatible = "regulator-fixed"; - vdd_3v3_sys: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "VDD_3V3_SYS"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-enable-ramp-delay = <240>; - regulator-disable-ramp-delay = <11340>; - regulator-always-on; - regulator-boot-on; - - gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; - enable-active-high; - - vin-supply = <&vdd_5v0_sys>; - }; + regulator-name = "VDD_3V3_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + regulator-disable-ramp-delay = <11340>; + regulator-always-on; + regulator-boot-on; - vdd_3v3_sd: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; + gpio = <&pmic 3 GPIO_ACTIVE_HIGH>; + enable-active-high; - regulator-name = "VDD_3V3_SD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_5v0_sys>; + }; - gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; - enable-active-high; + vdd_3v3_sd: regulator@2 { + compatible = "regulator-fixed"; - vin-supply = <&vdd_3v3_sys>; - }; + regulator-name = "VDD_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; - vdd_hdmi: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; + gpio = <&gpio TEGRA_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + enable-active-high; - regulator-name = "VDD_HDMI_5V0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + vin-supply = <&vdd_3v3_sys>; + }; - vin-supply = <&vdd_5v0_sys>; - }; + vdd_hdmi: regulator@3 { + compatible = "regulator-fixed"; - vdd_hub_3v3: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; + regulator-name = "VDD_HDMI_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; - regulator-name = "VDD_HUB_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_5v0_sys>; + }; - gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>; - enable-active-high; + vdd_hub_3v3: regulator@4 { + compatible = "regulator-fixed"; - vin-supply = <&vdd_5v0_sys>; - }; + regulator-name = "VDD_HUB_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; - vdd_cpu: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; + gpio = <&gpio TEGRA_GPIO(A, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; - regulator-name = "VDD_CPU"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; + vin-supply = <&vdd_5v0_sys>; + }; - gpio = <&pmic 5 GPIO_ACTIVE_HIGH>; - enable-active-high; + vdd_cpu: regulator@5 { + compatible = "regulator-fixed"; - vin-supply = <&vdd_5v0_sys>; - }; + regulator-name = "VDD_CPU"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; - vdd_gpu: regulator@6 { - compatible = "pwm-regulator"; - reg = <6>; - pwms = <&pwm 1 4880>; - regulator-name = "VDD_GPU"; - regulator-min-microvolt = <710000>; - regulator-max-microvolt = <1320000>; - regulator-ramp-delay = <80>; - regulator-enable-ramp-delay = <2000>; - regulator-settling-time-us = <160>; - enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; - vin-supply = <&vdd_5v0_sys>; - }; + gpio = <&pmic 5 GPIO_ACTIVE_HIGH>; + enable-active-high; - avdd_io_edp_1v05: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; + vin-supply = <&vdd_5v0_sys>; + }; - regulator-name = "AVDD_IO_EDP_1V05"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; + vdd_gpu: regulator@6 { + compatible = "pwm-regulator"; + pwms = <&pwm 1 4880>; - gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; - enable-active-high; + regulator-name = "VDD_GPU"; + regulator-min-microvolt = <710000>; + regulator-max-microvolt = <1320000>; + regulator-ramp-delay = <80>; + regulator-enable-ramp-delay = <2000>; + regulator-settling-time-us = <160>; - vin-supply = <&avdd_1v05_pll>; - }; + enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&vdd_5v0_sys>; + }; + + avdd_io_edp_1v05: regulator@7 { + compatible = "regulator-fixed"; + + regulator-name = "AVDD_IO_EDP_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + gpio = <&pmic 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&avdd_1v05_pll>; }; }; diff --git a/dts/src/arm64/nvidia/tegra210-smaug.dts b/dts/src/arm64/nvidia/tegra210-smaug.dts index 2faab63905..bd78378248 100644 --- a/dts/src/arm64/nvidia/tegra210-smaug.dts +++ b/dts/src/arm64/nvidia/tegra210-smaug.dts @@ -1330,7 +1330,6 @@ battery: bq27742@55 { compatible = "ti,bq27742"; reg = <0x55>; - battery-name = "battery"; }; }; }; @@ -1355,11 +1354,11 @@ maxim,enable-active-discharge; maxim,enable-bias-control; maxim,enable-etr; - maxim,enable-gpio = <&max77620 5 0>; + maxim,enable-gpio = <&pmic 5 0>; maxim,externally-enable; }; - max77620: max77620@3c { + pmic: pmic@3c { compatible = "maxim,max77620"; reg = <0x3c>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; @@ -1373,8 +1372,8 @@ pinctrl-names = "default"; pinctrl-0 = <&max77620_default>; - max77620_default: pinmux@0 { - pin_gpio { + max77620_default: pinmux { + gpio0_1_2_7 { pins = "gpio0", "gpio1", "gpio2", "gpio7"; function = "gpio"; }; @@ -1384,7 +1383,7 @@ * sequence, So it must be sequenced up (automatically * set by OTP) and down properly. */ - pin_gpio3 { + gpio3 { pins = "gpio3"; function = "fps-out"; drive-open-drain = <1>; @@ -1393,13 +1392,13 @@ maxim,active-fps-power-down-slot = <2>; }; - pin_gpio5_6 { + gpio5_6 { pins = "gpio5", "gpio6"; function = "gpio"; drive-push-pull = <1>; }; - pin_32k { + gpio4 { pins = "gpio4"; function = "32k-out1"; }; @@ -1697,7 +1696,7 @@ }; }; - sdhci@700b0600 { + mmc@700b0600 { bus-width = <8>; non-removable; status = "okay"; @@ -1722,22 +1721,15 @@ status = "okay"; }; - agic@702f9000 { + interrupt-controller@702f9000 { status = "okay"; }; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: clock@0 { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; }; cpus { @@ -1815,88 +1807,73 @@ method = "smc"; }; - regulators { - compatible = "simple-bus"; - device_type = "fixed-regulators"; - #address-cells = <1>; - #size-cells = <0>; - - ppvar_sys: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "PPVAR_SYS"; - regulator-min-microvolt = <4400000>; - regulator-max-microvolt = <4400000>; - regulator-always-on; - }; + ppvar_sys: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "PPVAR_SYS"; + regulator-min-microvolt = <4400000>; + regulator-max-microvolt = <4400000>; + regulator-always-on; + }; - pplcd_vdd: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "PPLCD_VDD"; - regulator-min-microvolt = <4400000>; - regulator-max-microvolt = <4400000>; - gpio = <&gpio TEGRA_GPIO(V, 4) 0>; - enable-active-high; - regulator-boot-on; - }; + pplcd_vdd: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "PPLCD_VDD"; + regulator-min-microvolt = <4400000>; + regulator-max-microvolt = <4400000>; + gpio = <&gpio TEGRA_GPIO(V, 4) 0>; + enable-active-high; + regulator-boot-on; + }; - pp3000_always: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "PP3000_ALWAYS"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; + pp3000_always: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "PP3000_ALWAYS"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; - pp3300: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "PP3300"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - enable-active-high; - }; + pp3300: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "PP3300"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + }; - pp5000: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "PP5000"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + pp5000: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "PP5000"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - pp1800_lcdio: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "PP1800_LCDIO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio TEGRA_GPIO(V, 3) 0>; - enable-active-high; - regulator-boot-on; - }; + pp1800_lcdio: regulator@5 { + compatible = "regulator-fixed"; + regulator-name = "PP1800_LCDIO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio TEGRA_GPIO(V, 3) 0>; + enable-active-high; + regulator-boot-on; + }; - pp1800_cam: regulator@6 { - compatible = "regulator-fixed"; - reg= <6>; - regulator-name = "PP1800_CAM"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio TEGRA_GPIO(K, 3) 0>; - enable-active-high; - }; + pp1800_cam: regulator@6 { + compatible = "regulator-fixed"; + regulator-name = "PP1800_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio TEGRA_GPIO(K, 3) 0>; + enable-active-high; + }; - usbc_vbus: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "USBC_VBUS"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; + usbc_vbus: regulator@7 { + compatible = "regulator-fixed"; + regulator-name = "USBC_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; }; diff --git a/dts/src/arm64/nvidia/tegra210.dtsi b/dts/src/arm64/nvidia/tegra210.dtsi index 08655081f7..829f786af1 100644 --- a/dts/src/arm64/nvidia/tegra210.dtsi +++ b/dts/src/arm64/nvidia/tegra210.dtsi @@ -18,9 +18,9 @@ pcie@1003000 { compatible = "nvidia,tegra210-pcie"; device_type = "pci"; - reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ - 0x0 0x01003800 0x0 0x00000800 /* AFI registers */ - 0x0 0x02000000 0x0 0x10000000>; /* configuration space */ + reg = <0x0 0x01003000 0x0 0x00000800>, /* PADS registers */ + <0x0 0x01003800 0x0 0x00000800>, /* AFI registers */ + <0x0 0x02000000 0x0 0x10000000>; /* configuration space */ reg-names = "pads", "afi", "cs"; interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ @@ -34,11 +34,11 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */ - 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */ - 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */ - 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */ - 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ + ranges = <0x02000000 0 0x01000000 0x0 0x01000000 0 0x00001000>, /* port 0 configuration space */ + <0x02000000 0 0x01001000 0x0 0x01001000 0 0x00001000>, /* port 1 configuration space */ + <0x01000000 0 0x0 0x0 0x12000000 0 0x00010000>, /* downstream I/O (64 KiB) */ + <0x02000000 0 0x13000000 0x0 0x13000000 0 0x0d000000>, /* non-prefetchable memory (208 MiB) */ + <0x42000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ clocks = <&tegra_car TEGRA210_CLK_PCIE>, <&tegra_car TEGRA210_CLK_AFI>, @@ -86,10 +86,11 @@ }; host1x@50000000 { - compatible = "nvidia,tegra210-host1x", "simple-bus"; + compatible = "nvidia,tegra210-host1x"; reg = <0x0 0x50000000 0x0 0x00034000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */ + interrupt-names = "syncpt", "host1x"; clocks = <&tegra_car TEGRA210_CLK_HOST1X>; clock-names = "host1x"; resets = <&tegra_car 28>; @@ -186,9 +187,8 @@ compatible = "nvidia,tegra210-dc"; reg = <0x0 0x54200000 0x0 0x00040000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA210_CLK_DISP1>, - <&tegra_car TEGRA210_CLK_PLL_P>; - clock-names = "dc", "parent"; + clocks = <&tegra_car TEGRA210_CLK_DISP1>; + clock-names = "dc"; resets = <&tegra_car 27>; reset-names = "dc"; @@ -201,9 +201,8 @@ compatible = "nvidia,tegra210-dc"; reg = <0x0 0x54240000 0x0 0x00040000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&tegra_car TEGRA210_CLK_DISP2>, - <&tegra_car TEGRA210_CLK_PLL_P>; - clock-names = "dc", "parent"; + clocks = <&tegra_car TEGRA210_CLK_DISP2>; + clock-names = "dc"; resets = <&tegra_car 26>; reset-names = "dc"; @@ -326,7 +325,7 @@ }; dpaux: dpaux@545c0000 { - compatible = "nvidia,tegra124-dpaux"; + compatible = "nvidia,tegra210-dpaux"; reg = <0x0 0x545c0000 0x0 0x00040000>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_DPAUX>, @@ -362,6 +361,9 @@ compatible = "nvidia,tegra210-isp"; reg = <0x0 0x54600000 0x0 0x00040000>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_ISPA>; + resets = <&tegra_car 23>; + reset-names = "isp"; status = "disabled"; }; @@ -369,6 +371,9 @@ compatible = "nvidia,tegra210-isp"; reg = <0x0 0x54680000 0x0 0x00040000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_ISPB>; + resets = <&tegra_car 3>; + reset-names = "isp"; status = "disabled"; }; @@ -376,7 +381,16 @@ compatible = "nvidia,tegra210-i2c-vi"; reg = <0x0 0x546c0000 0x0 0x00040000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_VI_I2C>, + <&tegra_car TEGRA210_CLK_I2CSLOW>; + clock-names = "div-clk", "slow"; + resets = <&tegra_car 208>; + reset-names = "i2c"; + power-domains = <&pd_venc>; status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; }; }; @@ -998,8 +1012,8 @@ <&tegra_car TEGRA210_CLK_XUSB_HOST_SRC>, <&tegra_car TEGRA210_CLK_XUSB_FALCON_SRC>, <&tegra_car TEGRA210_CLK_XUSB_SS>, - <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>, <&tegra_car TEGRA210_CLK_XUSB_SS_SRC>, + <&tegra_car TEGRA210_CLK_XUSB_SS_DIV2>, <&tegra_car TEGRA210_CLK_XUSB_HS_SRC>, <&tegra_car TEGRA210_CLK_XUSB_FS_SRC>, <&tegra_car TEGRA210_CLK_PLL_U_480M>, @@ -1007,7 +1021,7 @@ <&tegra_car TEGRA210_CLK_PLL_E>; clock-names = "xusb_host", "xusb_host_src", "xusb_falcon_src", "xusb_ss", - "xusb_ss_div2", "xusb_ss_src", + "xusb_ss_src", "xusb_ss_div2", "xusb_hs_src", "xusb_fs_src", "pll_u_480m", "clk_m", "pll_e"; resets = <&tegra_car 89>, <&tegra_car 156>, @@ -1176,8 +1190,8 @@ }; }; - sdhci@700b0000 { - compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; + mmc@700b0000 { + compatible = "nvidia,tegra210-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SDMMC1>; @@ -1204,8 +1218,8 @@ status = "disabled"; }; - sdhci@700b0200 { - compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; + mmc@700b0200 { + compatible = "nvidia,tegra210-sdhci"; reg = <0x0 0x700b0200 0x0 0x200>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SDMMC2>; @@ -1221,8 +1235,8 @@ status = "disabled"; }; - sdhci@700b0400 { - compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; + mmc@700b0400 { + compatible = "nvidia,tegra210-sdhci"; reg = <0x0 0x700b0400 0x0 0x200>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SDMMC3>; @@ -1244,8 +1258,8 @@ status = "disabled"; }; - sdhci@700b0600 { - compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci"; + mmc@700b0600 { + compatible = "nvidia,tegra210-sdhci"; reg = <0x0 0x700b0600 0x0 0x200>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA210_CLK_SDMMC4>; @@ -1356,7 +1370,7 @@ status = "disabled"; }; - agic: agic@702f9000 { + agic: interrupt-controller@702f9000 { compatible = "nvidia,tegra210-agic"; #interrupt-cells = <3>; interrupt-controller; @@ -1547,8 +1561,8 @@ soctherm: thermal-sensor@700e2000 { compatible = "nvidia,tegra210-soctherm"; - reg = <0x0 0x700e2000 0x0 0x600 /* SOC_THERM reg_base */ - 0x0 0x60006000 0x0 0x400>; /* CAR reg_base */ + reg = <0x0 0x700e2000 0x0 0x600>, /* SOC_THERM reg_base */ + <0x0 0x60006000 0x0 0x400>; /* CAR reg_base */ reg-names = "soctherm-reg", "car-reg"; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/qcom/apq8016-sbc.dtsi b/dts/src/arm64/qcom/apq8016-sbc.dtsi index 8a4b790aa7..194343510d 100644 --- a/dts/src/arm64/qcom/apq8016-sbc.dtsi +++ b/dts/src/arm64/qcom/apq8016-sbc.dtsi @@ -453,22 +453,23 @@ */ - sound: sound { - compatible = "qcom,apq8016-sbc-sndcard"; - reg = <0x07702000 0x4>, <0x07702004 0x4>; - reg-names = "mic-iomux", "spkr-iomux"; - - status = "okay"; - pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; - pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; - pinctrl-names = "default", "sleep"; - qcom,model = "DB410c"; - qcom,audio-routing = - "AMIC2", "MIC BIAS Internal2", - "AMIC3", "MIC BIAS External1"; + sound: sound { + compatible = "qcom,apq8016-sbc-sndcard"; + reg = <0x07702000 0x4>, <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + + status = "okay"; + pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; + pinctrl-names = "default", "sleep"; + qcom,model = "DB410c"; + qcom,audio-routing = + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + external-dai-link@0 { link-name = "ADV7533"; - cpu { /* QUAT */ + cpu { sound-dai = <&lpass MI2S_QUATERNARY>; }; codec { @@ -476,26 +477,26 @@ }; }; - internal-codec-playback-dai-link@0 { /* I2S - Internal codec */ - link-name = "WCD"; - cpu { /* PRIMARY */ - sound-dai = <&lpass MI2S_PRIMARY>; - }; - codec { - sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; - }; - }; - - internal-codec-capture-dai-link@0 { /* I2S - Internal codec */ - link-name = "WCD-Capture"; - cpu { /* PRIMARY */ - sound-dai = <&lpass MI2S_TERTIARY>; - }; - codec { - sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; - }; - }; - }; + internal-codec-playback-dai-link@0 { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + internal-codec-capture-dai-link@0 { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; + }; spmi@200f000 { pm8916@0 { @@ -650,9 +651,9 @@ }; &wcd_codec { - status = "okay"; - clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; - clock-names = "mclk"; + status = "okay"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; qcom,mbhc-vthreshold-low = <75 150 237 450 500>; qcom,mbhc-vthreshold-high = <75 150 237 450 500>; }; @@ -778,135 +779,120 @@ }; }; +/* + * 2mA drive strength is not enough when connecting multiple + * I2C devices with different pull up resistors. + */ +&i2c2_default { + drive-strength = <16>; +}; + +&i2c4_default { + drive-strength = <16>; +}; + +&i2c6_default { + drive-strength = <16>; +}; + &msmgpio { msmgpio_leds: msmgpio-leds { - pinconf { - pins = "gpio21", "gpio120"; - function = "gpio"; - output-low; - }; + pins = "gpio21", "gpio120"; + function = "gpio"; + + output-low; }; usb_id_default: usb-id-default { - pinmux { - function = "gpio"; - pins = "gpio121"; - }; + pins = "gpio121"; + function = "gpio"; - pinconf { - pins = "gpio121"; - drive-strength = <8>; - input-enable; - bias-pull-up; - }; + drive-strength = <8>; + input-enable; + bias-pull-up; }; adv7533_int_active: adv533-int-active { - pinmux { - function = "gpio"; - pins = "gpio31"; - }; - pinconf { - pins = "gpio31"; - drive-strength = <16>; - bias-disable; - }; + pins = "gpio31"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; }; adv7533_int_suspend: adv7533-int-suspend { - pinmux { - function = "gpio"; - pins = "gpio31"; - }; - pinconf { - pins = "gpio31"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio31"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; adv7533_switch_active: adv7533-switch-active { - pinmux { - function = "gpio"; - pins = "gpio32"; - }; - pinconf { - pins = "gpio32"; - drive-strength = <16>; - bias-disable; - }; + pins = "gpio32"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; }; adv7533_switch_suspend: adv7533-switch-suspend { - pinmux { - function = "gpio"; - pins = "gpio32"; - }; - pinconf { - pins = "gpio32"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio32"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; msm_key_volp_n_default: msm-key-volp-n-default { - pinmux { - function = "gpio"; - pins = "gpio107"; - }; - pinconf { - pins = "gpio107"; - drive-strength = <8>; - input-enable; - bias-pull-up; - }; + pins = "gpio107"; + function = "gpio"; + + drive-strength = <8>; + input-enable; + bias-pull-up; }; }; &pm8916_gpios { usb_hub_reset_pm: usb-hub-reset-pm { - pinconf { - pins = "gpio3"; - function = PMIC_GPIO_FUNC_NORMAL; - input-disable; - output-high; - }; + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + + input-disable; + output-high; }; usb_hub_reset_pm_device: usb-hub-reset-pm-device { - pinconf { - pins = "gpio3"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - }; + pins = "gpio3"; + function = PMIC_GPIO_FUNC_NORMAL; + + output-low; }; usb_sw_sel_pm: usb-sw-sel-pm { - pinconf { - pins = "gpio4"; - function = PMIC_GPIO_FUNC_NORMAL; - power-source = <PM8916_GPIO_VPH>; - input-disable; - output-high; - }; + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + + power-source = <PM8916_GPIO_VPH>; + input-disable; + output-high; }; usb_sw_sel_pm_device: usb-sw-sel-pm-device { - pinconf { - pins = "gpio4"; - function = PMIC_GPIO_FUNC_NORMAL; - power-source = <PM8916_GPIO_VPH>; - input-disable; - output-low; - }; + pins = "gpio4"; + function = PMIC_GPIO_FUNC_NORMAL; + + power-source = <PM8916_GPIO_VPH>; + input-disable; + output-low; }; pm8916_gpios_leds: pm8916-gpios-leds { - pinconf { - pins = "gpio1", "gpio2"; - function = PMIC_GPIO_FUNC_NORMAL; - output-low; - }; + pins = "gpio1", "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + + output-low; }; }; @@ -915,19 +901,17 @@ pinctrl-0 = <&ls_exp_gpio_f>; ls_exp_gpio_f: pm8916-mpp4 { - pinconf { - pins = "mpp4"; - function = "digital"; - output-low; - power-source = <PM8916_MPP_L5>; // 1.8V - }; + pins = "mpp4"; + function = "digital"; + + output-low; + power-source = <PM8916_MPP_L5>; // 1.8V }; pm8916_mpps_leds: pm8916-mpps-leds { - pinconf { - pins = "mpp2", "mpp3"; - function = "digital"; - output-low; - }; + pins = "mpp2", "mpp3"; + function = "digital"; + + output-low; }; }; diff --git a/dts/src/arm64/qcom/ipq8074-hk01.dts b/dts/src/arm64/qcom/ipq8074-hk01.dts index 6754cb0638..f4a76162ab 100644 --- a/dts/src/arm64/qcom/ipq8074-hk01.dts +++ b/dts/src/arm64/qcom/ipq8074-hk01.dts @@ -82,3 +82,31 @@ nand-bus-width = <8>; }; }; + +&sdhc_1 { + status = "ok"; +}; + +&qusb_phy_0 { + status = "ok"; +}; + +&qusb_phy_1 { + status = "ok"; +}; + +&ssphy_0 { + status = "ok"; +}; + +&ssphy_1 { + status = "ok"; +}; + +&usb_0 { + status = "ok"; +}; + +&usb_1 { + status = "ok"; +}; diff --git a/dts/src/arm64/qcom/ipq8074.dtsi b/dts/src/arm64/qcom/ipq8074.dtsi index 5303821300..96a5ec89b5 100644 --- a/dts/src/arm64/qcom/ipq8074.dtsi +++ b/dts/src/arm64/qcom/ipq8074.dtsi @@ -82,6 +82,91 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; + ssphy_1: phy@58000 { + compatible = "qcom,ipq8074-qmp-usb3-phy"; + reg = <0x00058000 0x1c4>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB1_AUX_CLK>, + <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB1_PHY_BCR>, + <&gcc GCC_USB3PHY_1_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; + + usb1_ssphy: lane@58200 { + reg = <0x00058200 0x130>, /* Tx */ + <0x00058400 0x200>, /* Rx */ + <0x00058800 0x1f8>, /* PCS */ + <0x00058600 0x044>; /* PCS misc*/ + #phy-cells = <0>; + clocks = <&gcc GCC_USB1_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb1_pipe_clk_src"; + }; + }; + + qusb_phy_1: phy@59000 { + compatible = "qcom,ipq8074-qusb2-phy"; + reg = <0x00059000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_1_PHY_BCR>; + status = "disabled"; + }; + + ssphy_0: phy@78000 { + compatible = "qcom,ipq8074-qmp-usb3-phy"; + reg = <0x00078000 0x1c4>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB0_AUX_CLK>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB0_PHY_BCR>, + <&gcc GCC_USB3PHY_0_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; + + usb0_ssphy: lane@78200 { + reg = <0x00078200 0x130>, /* Tx */ + <0x00078400 0x200>, /* Rx */ + <0x00078800 0x1f8>, /* PCS */ + <0x00078600 0x044>; /* PCS misc*/ + #phy-cells = <0>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb0_pipe_clk_src"; + }; + }; + + qusb_phy_0: phy@79000 { + compatible = "qcom,ipq8074-qusb2-phy"; + reg = <0x00079000 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + }; + pcie_phy0: phy@86000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; reg = <0x00086000 0x1000>; @@ -169,6 +254,28 @@ #reset-cells = <0x1>; }; + sdhc_1: sdhci@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x500>, <0x7824000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&xo>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>; + clock-names = "xo", "iface", "core"; + max-frequency = <384000000>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + + status = "disabled"; + }; + blsp_dma: dma@7884000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07884000 0x2b000>; @@ -294,6 +401,88 @@ status = "disabled"; }; + usb_0: usb@8af8800 { + compatible = "qcom,dwc3"; + reg = <0x08af8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "sys_noc_axi", + "master", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <133330000>, + <19200000>; + + resets = <&gcc GCC_USB0_BCR>; + status = "disabled"; + + dwc_0: dwc3@8a00000 { + compatible = "snps,dwc3"; + reg = <0x8a00000 0xcd00>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + phys = <&qusb_phy_0>, <&usb0_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + + usb_1: usb@8cf8800 { + compatible = "qcom,dwc3"; + reg = <0x08cf8800 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>, + <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_SLEEP_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + clock-names = "sys_noc_axi", + "master", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>, + <&gcc GCC_USB1_MASTER_CLK>, + <&gcc GCC_USB1_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <133330000>, + <19200000>; + + resets = <&gcc GCC_USB1_BCR>; + status = "disabled"; + + dwc_1: dwc3@8c00000 { + compatible = "snps,dwc3"; + reg = <0x8c00000 0xcd00>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + phys = <&qusb_phy_1>, <&usb1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + dr_mode = "host"; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; diff --git a/dts/src/arm64/qcom/msm8916-longcheer-l8150.dts b/dts/src/arm64/qcom/msm8916-longcheer-l8150.dts index d5230cb76e..9f2c8e94fd 100644 --- a/dts/src/arm64/qcom/msm8916-longcheer-l8150.dts +++ b/dts/src/arm64/qcom/msm8916-longcheer-l8150.dts @@ -108,31 +108,6 @@ }; }; -&msmgpio { - gpio_keys_default: gpio-keys-default { - pinmux { - function = "gpio"; - pins = "gpio107"; - }; - pinconf { - pins = "gpio107"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - usb_vbus_default: usb-vbus-default { - pinmux { - function = "gpio"; - pins = "gpio62"; - }; - pinconf { - pins = "gpio62"; - bias-pull-up; - }; - }; -}; - &spmi_bus { pm8916@0 { pon@800 { @@ -258,3 +233,20 @@ regulator-max-microvolt = <2700000>; }; }; + +&msmgpio { + gpio_keys_default: gpio-keys-default { + pins = "gpio107"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + usb_vbus_default: usb-vbus-default { + pins = "gpio62"; + function = "gpio"; + + bias-pull-up; + }; +}; diff --git a/dts/src/arm64/qcom/msm8916-pins.dtsi b/dts/src/arm64/qcom/msm8916-pins.dtsi index e9c00367f7..4dc437f13f 100644 --- a/dts/src/arm64/qcom/msm8916-pins.dtsi +++ b/dts/src/arm64/qcom/msm8916-pins.dtsi @@ -6,74 +6,49 @@ &msmgpio { blsp1_uart1_default: blsp1-uart1-default { - pinmux { - function = "blsp_uart1"; - // TX, RX, CTS_N, RTS_N - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - }; - pinconf { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - drive-strength = <16>; - bias-disable; - }; + // TX, RX, CTS_N, RTS_N + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + + drive-strength = <16>; + bias-disable; }; blsp1_uart1_sleep: blsp1-uart1-sleep { - pinmux { - function = "gpio"; - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - }; - pinconf { - pins = "gpio0", "gpio1", - "gpio2", "gpio3"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; blsp1_uart2_default: blsp1-uart2-default { - pinmux { - function = "blsp_uart2"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <16>; - bias-disable; - }; + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + + drive-strength = <16>; + bias-disable; }; blsp1_uart2_sleep: blsp1-uart2-sleep { - pinmux { - function = "gpio"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio4", "gpio5"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; spi1_default: spi1-default { - pinmux { - function = "blsp_spi1"; - pins = "gpio0", "gpio1", "gpio3"; - }; - pinmux-cs { - function = "gpio"; - pins = "gpio2"; - }; - pinconf { - pins = "gpio0", "gpio1", "gpio3"; - drive-strength = <12>; - bias-disable; - }; - pinconf-cs { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + + drive-strength = <12>; + bias-disable; + + cs { pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; bias-disable; output-high; @@ -81,33 +56,24 @@ }; spi1_sleep: spi1-sleep { - pinmux { - function = "gpio"; - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - }; - pinconf { - pins = "gpio0", "gpio1", "gpio2", "gpio3"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; spi2_default: spi2-default { - pinmux { - function = "blsp_spi2"; - pins = "gpio4", "gpio5", "gpio7"; - }; - pinmux-cs { - function = "gpio"; - pins = "gpio6"; - }; - pinconf { - pins = "gpio4", "gpio5", "gpio7"; - drive-strength = <12>; - bias-disable; - }; - pinconf-cs { + pins = "gpio4", "gpio5", "gpio7"; + function = "blsp_spi2"; + + drive-strength = <12>; + bias-disable; + + cs { pins = "gpio6"; + function = "gpio"; + drive-strength = <16>; bias-disable; output-high; @@ -115,33 +81,24 @@ }; spi2_sleep: spi2-sleep { - pinmux { - function = "gpio"; - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - }; - pinconf { - pins = "gpio4", "gpio5", "gpio6", "gpio7"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; spi3_default: spi3-default { - pinmux { - function = "blsp_spi3"; - pins = "gpio8", "gpio9", "gpio11"; - }; - pinmux-cs { - function = "gpio"; - pins = "gpio10"; - }; - pinconf { - pins = "gpio8", "gpio9", "gpio11"; - drive-strength = <12>; - bias-disable; - }; - pinconf-cs { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; + + drive-strength = <12>; + bias-disable; + + cs { pins = "gpio10"; + function = "gpio"; + drive-strength = <16>; bias-disable; output-high; @@ -149,33 +106,24 @@ }; spi3_sleep: spi3-sleep { - pinmux { - function = "gpio"; - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - }; - pinconf { - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; spi4_default: spi4-default { - pinmux { - function = "blsp_spi4"; - pins = "gpio12", "gpio13", "gpio15"; - }; - pinmux-cs { - function = "gpio"; - pins = "gpio14"; - }; - pinconf { - pins = "gpio12", "gpio13", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinconf-cs { + pins = "gpio12", "gpio13", "gpio15"; + function = "blsp_spi4"; + + drive-strength = <12>; + bias-disable; + + cs { pins = "gpio14"; + function = "gpio"; + drive-strength = <16>; bias-disable; output-high; @@ -183,33 +131,24 @@ }; spi4_sleep: spi4-sleep { - pinmux { - function = "gpio"; - pins = "gpio12", "gpio13", "gpio14", "gpio15"; - }; - pinconf { - pins = "gpio12", "gpio13", "gpio14", "gpio15"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; spi5_default: spi5-default { - pinmux { - function = "blsp_spi5"; - pins = "gpio16", "gpio17", "gpio19"; - }; - pinmux-cs { - function = "gpio"; - pins = "gpio18"; - }; - pinconf { - pins = "gpio16", "gpio17", "gpio19"; - drive-strength = <12>; - bias-disable; - }; - pinconf-cs { + pins = "gpio16", "gpio17", "gpio19"; + function = "blsp_spi5"; + + drive-strength = <12>; + bias-disable; + + cs { pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; bias-disable; output-high; @@ -217,33 +156,24 @@ }; spi5_sleep: spi5-sleep { - pinmux { - function = "gpio"; - pins = "gpio16", "gpio17", "gpio18", "gpio19"; - }; - pinconf { - pins = "gpio16", "gpio17", "gpio18", "gpio19"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; spi6_default: spi6-default { - pinmux { - function = "blsp_spi6"; - pins = "gpio20", "gpio21", "gpio23"; - }; - pinmux-cs { - function = "gpio"; - pins = "gpio22"; - }; - pinconf { - pins = "gpio20", "gpio21", "gpio23"; - drive-strength = <12>; - bias-disable; - }; - pinconf-cs { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + + drive-strength = <12>; + bias-disable; + + cs { pins = "gpio22"; + function = "gpio"; + drive-strength = <16>; bias-disable; output-high; @@ -251,466 +181,315 @@ }; spi6_sleep: spi6-sleep { - pinmux { - function = "gpio"; - pins = "gpio20", "gpio21", "gpio22", "gpio23"; - }; - pinconf { - pins = "gpio20", "gpio21", "gpio22", "gpio23"; - drive-strength = <2>; - bias-pull-down; - }; + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; i2c1_default: i2c1-default { - pinmux { - function = "blsp_i2c1"; - pins = "gpio2", "gpio3"; - }; - pinconf { - pins = "gpio2", "gpio3"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + + drive-strength = <2>; + bias-disable; }; i2c1_sleep: i2c1-sleep { - pinmux { - function = "gpio"; - pins = "gpio2", "gpio3"; - }; - pinconf { - pins = "gpio2", "gpio3"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio2", "gpio3"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; i2c2_default: i2c2-default { - pinmux { - function = "blsp_i2c2"; - pins = "gpio6", "gpio7"; - }; - pinconf { - pins = "gpio6", "gpio7"; - drive-strength = <16>; - bias-disable; - }; + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + + drive-strength = <2>; + bias-disable; }; i2c2_sleep: i2c2-sleep { - pinmux { - function = "gpio"; - pins = "gpio6", "gpio7"; - }; - pinconf { - pins = "gpio6", "gpio7"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio6", "gpio7"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; i2c4_default: i2c4-default { - pinmux { - function = "blsp_i2c4"; - pins = "gpio14", "gpio15"; - }; - pinconf { - pins = "gpio14", "gpio15"; - drive-strength = <16>; - bias-disable; - }; + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + + drive-strength = <2>; + bias-disable; }; i2c4_sleep: i2c4-sleep { - pinmux { - function = "gpio"; - pins = "gpio14", "gpio15"; - }; - pinconf { - pins = "gpio14", "gpio15"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio14", "gpio15"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; i2c5_default: i2c5-default { - pinmux { - function = "blsp_i2c5"; - pins = "gpio18", "gpio19"; - }; - pinconf { - pins = "gpio18", "gpio19"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + + drive-strength = <2>; + bias-disable; }; i2c5_sleep: i2c5-sleep { - pinmux { - function = "gpio"; - pins = "gpio18", "gpio19"; - }; - pinconf { - pins = "gpio18", "gpio19"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio18", "gpio19"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; i2c6_default: i2c6-default { - pinmux { - function = "blsp_i2c6"; - pins = "gpio22", "gpio23"; - }; - pinconf { - pins = "gpio22", "gpio23"; - drive-strength = <16>; - bias-disable; - }; + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + + drive-strength = <2>; + bias-disable; }; i2c6_sleep: i2c6-sleep { - pinmux { - function = "gpio"; - pins = "gpio22", "gpio23"; - }; - pinconf { - pins = "gpio22", "gpio23"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio22", "gpio23"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; pmx-sdc1-clk { sdc1_clk_on: clk-on { - pinmux { - pins = "sdc1_clk"; - }; - pinconf { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <16>; - }; + pins = "sdc1_clk"; + + bias-disable; + drive-strength = <16>; }; sdc1_clk_off: clk-off { - pinmux { - pins = "sdc1_clk"; - }; - pinconf { - pins = "sdc1_clk"; - bias-disable; - drive-strength = <2>; - }; + pins = "sdc1_clk"; + + bias-disable; + drive-strength = <2>; }; }; pmx-sdc1-cmd { sdc1_cmd_on: cmd-on { - pinmux { - pins = "sdc1_cmd"; - }; - pinconf { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <10>; - }; + pins = "sdc1_cmd"; + + bias-pull-up; + drive-strength = <10>; }; sdc1_cmd_off: cmd-off { - pinmux { - pins = "sdc1_cmd"; - }; - pinconf { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <2>; - }; + pins = "sdc1_cmd"; + + bias-pull-up; + drive-strength = <2>; }; }; pmx-sdc1-data { sdc1_data_on: data-on { - pinmux { - pins = "sdc1_data"; - }; - pinconf { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <10>; - }; + pins = "sdc1_data"; + + bias-pull-up; + drive-strength = <10>; }; sdc1_data_off: data-off { - pinmux { - pins = "sdc1_data"; - }; - pinconf { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <2>; - }; + pins = "sdc1_data"; + + bias-pull-up; + drive-strength = <2>; }; }; pmx-sdc2-clk { sdc2_clk_on: clk-on { - pinmux { - pins = "sdc2_clk"; - }; - pinconf { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <16>; - }; + pins = "sdc2_clk"; + + bias-disable; + drive-strength = <16>; }; sdc2_clk_off: clk-off { - pinmux { - pins = "sdc2_clk"; - }; - pinconf { - pins = "sdc2_clk"; - bias-disable; - drive-strength = <2>; - }; + pins = "sdc2_clk"; + + bias-disable; + drive-strength = <2>; }; }; pmx-sdc2-cmd { sdc2_cmd_on: cmd-on { - pinmux { - pins = "sdc2_cmd"; - }; - pinconf { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <10>; - }; + pins = "sdc2_cmd"; + + bias-pull-up; + drive-strength = <10>; }; sdc2_cmd_off: cmd-off { - pinmux { - pins = "sdc2_cmd"; - }; - pinconf { - pins = "sdc2_cmd"; - bias-pull-up; - drive-strength = <2>; - }; + pins = "sdc2_cmd"; + + bias-pull-up; + drive-strength = <2>; }; }; pmx-sdc2-data { sdc2_data_on: data-on { - pinmux { - pins = "sdc2_data"; - }; - pinconf { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <10>; - }; + pins = "sdc2_data"; + + bias-pull-up; + drive-strength = <10>; }; sdc2_data_off: data-off { - pinmux { - pins = "sdc2_data"; - }; - pinconf { - pins = "sdc2_data"; - bias-pull-up; - drive-strength = <2>; - }; + pins = "sdc2_data"; + + bias-pull-up; + drive-strength = <2>; }; }; pmx-sdc2-cd-pin { sdc2_cd_on: cd-on { - pinmux { - function = "gpio"; - pins = "gpio38"; - }; - pinconf { - pins = "gpio38"; - drive-strength = <2>; - bias-pull-up; - }; + pins = "gpio38"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; }; sdc2_cd_off: cd-off { - pinmux { - function = "gpio"; - pins = "gpio38"; - }; - pinconf { - pins = "gpio38"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio38"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; }; cdc-pdm-lines { cdc_pdm_lines_act: pdm-lines-on { - pinmux { - function = "cdc_pdm0"; - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - }; - pinconf { - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - drive-strength = <8>; - bias-pull-none; - }; + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + + drive-strength = <8>; + bias-disable; }; cdc_pdm_lines_sus: pdm-lines-off { - pinmux { - function = "cdc_pdm0"; - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - }; - pinconf { - pins = "gpio63", "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + + drive-strength = <2>; + bias-pull-down; }; }; ext-pri-tlmm-lines { ext_pri_tlmm_lines_act: ext-pa-on { - pinmux { - function = "pri_mi2s"; - pins = "gpio113", "gpio114", "gpio115", - "gpio116"; - }; - pinconf { - pins = "gpio113", "gpio114", "gpio115", - "gpio116"; - drive-strength = <8>; - bias-pull-none; - }; - }; + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; ext_pri_tlmm_lines_sus: ext-pa-off { - pinmux { - function = "pri_mi2s"; - pins = "gpio113", "gpio114", "gpio115", - "gpio116"; - }; - pinconf { - pins = "gpio113", "gpio114", "gpio115", - "gpio116"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + + drive-strength = <2>; + bias-disable; }; }; ext-pri-ws-line { ext_pri_ws_act: ext-pa-on { - pinmux { - function = "pri_mi2s_ws"; - pins = "gpio110"; - }; - pinconf { - pins = "gpio110"; - drive-strength = <8>; - bias-pull-none; - }; - }; + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <8>; + bias-disable; + }; ext_pri_ws_sus: ext-pa-off { - pinmux { - function = "pri_mi2s_ws"; - pins = "gpio110"; - }; - pinconf { - pins = "gpio110"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio110"; + function = "pri_mi2s_ws"; + + drive-strength = <2>; + bias-disable; }; }; ext-mclk-tlmm-lines { ext_mclk_tlmm_lines_act: mclk-lines-on { - pinmux { - function = "pri_mi2s"; - pins = "gpio116"; - }; - pinconf { - pins = "gpio116"; - drive-strength = <8>; - bias-pull-none; - }; + pins = "gpio116"; + function = "pri_mi2s"; + + drive-strength = <8>; + bias-disable; }; ext_mclk_tlmm_lines_sus: mclk-lines-off { - pinmux { - function = "pri_mi2s"; - pins = "gpio116"; - }; - pinconf { - pins = "gpio116"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio116"; + function = "pri_mi2s"; + + drive-strength = <2>; + bias-disable; }; }; /* secondary Mi2S */ ext-sec-tlmm-lines { ext_sec_tlmm_lines_act: tlmm-lines-on { - pinmux { - function = "sec_mi2s"; - pins = "gpio112", "gpio117", "gpio118", - "gpio119"; - }; - pinconf { - pins = "gpio112", "gpio117", "gpio118", - "gpio119"; - drive-strength = <8>; - bias-pull-none; - }; + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + + drive-strength = <8>; + bias-disable; }; ext_sec_tlmm_lines_sus: tlmm-lines-off { - pinmux { - function = "sec_mi2s"; - pins = "gpio112", "gpio117", "gpio118", - "gpio119"; - }; - pinconf { - pins = "gpio112", "gpio117", "gpio118", - "gpio119"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + + drive-strength = <2>; + bias-disable; }; }; cdc-dmic-lines { cdc_dmic_lines_act: dmic-lines-on { - pinmux-dmic0-clk { - function = "dmic0_clk"; + clk { pins = "gpio0"; + function = "dmic0_clk"; + + drive-strength = <8>; }; - pinmux-dmic0-data { - function = "dmic0_data"; + data { pins = "gpio1"; - }; - pinconf { - pins = "gpio0", "gpio1"; + function = "dmic0_data"; + drive-strength = <8>; }; }; cdc_dmic_lines_sus: dmic-lines-off { - pinmux-dmic0-clk { - function = "dmic0_clk"; + clk { pins = "gpio0"; + function = "dmic0_clk"; + + drive-strength = <2>; + bias-disable; }; - pinmux-dmic0-data { - function = "dmic0_data"; + data { pins = "gpio1"; - }; - pinconf { - pins = "gpio0", "gpio1"; + function = "dmic0_data"; + drive-strength = <2>; bias-disable; }; @@ -718,88 +497,64 @@ }; wcnss_pin_a: wcnss-active { - pinmux { - pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; - function = "wcss_wlan"; - }; - pinconf { - pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; - drive-strength = <6>; - bias-pull-up; - }; + pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; + function = "wcss_wlan"; + + drive-strength = <6>; + bias-pull-up; }; cci0_default: cci0-default { - pinmux { - function = "cci_i2c"; - pins = "gpio29", "gpio30"; - }; - pinconf { - pins = "gpio29", "gpio30"; - drive-strength = <16>; - bias-disable; - }; + pins = "gpio29", "gpio30"; + function = "cci_i2c"; + + drive-strength = <16>; + bias-disable; }; camera_front_default: camera-front-default { - pinmux-pwdn { - function = "gpio"; - pins = "gpio33"; - }; - pinconf-pwdn { + pwdn { pins = "gpio33"; + function = "gpio"; + drive-strength = <16>; bias-disable; }; - - pinmux-rst { - function = "gpio"; - pins = "gpio28"; - }; - pinconf-rst { + rst { pins = "gpio28"; + function = "gpio"; + drive-strength = <16>; bias-disable; }; - - pinmux-mclk1 { - function = "cam_mclk1"; - pins = "gpio27"; - }; - pinconf-mclk1 { + mclk1 { pins = "gpio27"; + function = "cam_mclk1"; + drive-strength = <16>; bias-disable; }; }; camera_rear_default: camera-rear-default { - pinmux-pwdn { - function = "gpio"; - pins = "gpio34"; - }; - pinconf-pwdn { + pwdn { pins = "gpio34"; + function = "gpio"; + drive-strength = <16>; bias-disable; }; - - pinmux-rst { - function = "gpio"; - pins = "gpio35"; - }; - pinconf-rst { + rst { pins = "gpio35"; + function = "gpio"; + drive-strength = <16>; bias-disable; }; - - pinmux-mclk0 { - function = "cam_mclk0"; - pins = "gpio26"; - }; - pinconf-mclk0 { + mclk0 { pins = "gpio26"; + function = "cam_mclk0"; + drive-strength = <16>; bias-disable; }; diff --git a/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi b/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi index ea52adf07a..a0c00d9d62 100644 --- a/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi +++ b/dts/src/arm64/qcom/msm8916-samsung-a2015-common.dtsi @@ -167,77 +167,33 @@ }; }; -&msmgpio { - gpio_keys_default: gpio-keys-default { - pinmux { - function = "gpio"; - pins = "gpio107", "gpio109"; - }; - pinconf { - pins = "gpio107", "gpio109"; - drive-strength = <2>; - bias-pull-up; - }; - }; +&blsp_i2c2 { + status = "okay"; - gpio_hall_sensor_default: gpio-hall-sensor-default { - pinmux { - function = "gpio"; - pins = "gpio52"; - }; - pinconf { - pins = "gpio52"; - drive-strength = <2>; - bias-disable; - }; - }; + accelerometer: accelerometer@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + interrupt-parent = <&msmgpio>; + interrupts = <115 IRQ_TYPE_EDGE_RISING>; - muic_int_default: muic-int-default { - pinmux { - function = "gpio"; - pins = "gpio12"; - }; - pinconf { - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - }; + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; }; - tsp_en_default: tsp-en-default { - pinmux { - function = "gpio"; - pins = "gpio73"; - }; - pinconf { - pins = "gpio73"; - drive-strength = <2>; - bias-disable; - }; + magnetometer@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; }; +}; - pmx-mdss { - mdss_default: mdss-default { - pinmux { - function = "gpio"; - pins = "gpio25"; - }; - pinconf { - pins = "gpio25"; - drive-strength = <8>; - bias-disable; - }; - }; - - mdss_sleep: mdss-sleep { - pinmux { - function = "gpio"; - pins = "gpio25"; - }; - pinconf { - pins = "gpio25"; - drive-strength = <2>; - bias-pull-down; +&spmi_bus { + pm8916@0 { + pon@800 { + volume-down { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; }; }; }; @@ -356,15 +312,61 @@ }; }; -&spmi_bus { - pm8916@0 { - pon@800 { - volume-down { - compatible = "qcom,pm8941-resin"; - interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; - bias-pull-up; - linux,code = <KEY_VOLUMEDOWN>; - }; +&msmgpio { + accel_int_default: accel-int-default { + pins = "gpio115"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + gpio_keys_default: gpio-keys-default { + pins = "gpio107", "gpio109"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default { + pins = "gpio52"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + mdss { + mdss_default: mdss-default { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <8>; + bias-disable; + }; + mdss_sleep: mdss-sleep { + pins = "gpio25"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; }; }; + + muic_int_default: muic-int-default { + pins = "gpio12"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default: tsp-en-default { + pins = "gpio73"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; }; diff --git a/dts/src/arm64/qcom/msm8916-samsung-a3u-eur.dts b/dts/src/arm64/qcom/msm8916-samsung-a3u-eur.dts index b46c872890..410c7d199f 100644 --- a/dts/src/arm64/qcom/msm8916-samsung-a3u-eur.dts +++ b/dts/src/arm64/qcom/msm8916-samsung-a3u-eur.dts @@ -22,6 +22,12 @@ }; }; +&accelerometer { + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "1"; +}; + &dsi0 { panel@0 { reg = <0>; @@ -51,14 +57,10 @@ &msmgpio { panel_vdd3_default: panel-vdd3-default { - pinmux { - function = "gpio"; - pins = "gpio9"; - }; - pinconf { - pins = "gpio9"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio9"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; }; diff --git a/dts/src/arm64/qcom/msm8916-samsung-a5u-eur.dts b/dts/src/arm64/qcom/msm8916-samsung-a5u-eur.dts index a555db8f6b..e39c04d977 100644 --- a/dts/src/arm64/qcom/msm8916-samsung-a5u-eur.dts +++ b/dts/src/arm64/qcom/msm8916-samsung-a5u-eur.dts @@ -9,6 +9,12 @@ compatible = "samsung,a5u-eur", "qcom,msm8916"; }; +&accelerometer { + mount-matrix = "-1", "0", "0", + "0", "1", "0", + "0", "0", "1"; +}; + &blsp_i2c5 { status = "okay"; @@ -38,14 +44,10 @@ &msmgpio { ts_int_default: ts-int-default { - pinmux { - function = "gpio"; - pins = "gpio13"; - }; - pinconf { - pins = "gpio13"; - drive-strength = <2>; - bias-disable; - }; + pins = "gpio13"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; }; }; diff --git a/dts/src/arm64/qcom/msm8916.dtsi b/dts/src/arm64/qcom/msm8916.dtsi index 32bd140ac9..67cae5f9e4 100644 --- a/dts/src/arm64/qcom/msm8916.dtsi +++ b/dts/src/arm64/qcom/msm8916.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/arm/coresight-cti-dt.h> +#include <dt-bindings/interconnect/qcom,msm8916.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8916.h> #include <dt-bindings/reset/qcom,gcc-msm8916.h> @@ -406,11 +407,38 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; + bimc: interconnect@400000 { + compatible = "qcom,msm8916-bimc"; + reg = <0x00400000 0x62000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + }; + restart@4ab000 { compatible = "qcom,pshold"; reg = <0x4ab000 0x4>; }; + pcnoc: interconnect@500000 { + compatible = "qcom,msm8916-pcnoc"; + reg = <0x00500000 0x11000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + }; + + snoc: interconnect@580000 { + compatible = "qcom,msm8916-snoc"; + reg = <0x00580000 0x14000>; + #interconnect-cells = <1>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + }; + msmgpio: pinctrl@1000000 { compatible = "qcom,msm8916-pinctrl"; reg = <0x1000000 0x300000>; @@ -700,6 +728,9 @@ interrupt-names = "lpass-irq-lpaif"; reg = <0x07708000 0x10000>; reg-names = "lpass-lpaif"; + + #address-cells = <1>; + #size-cells = <0>; }; lpass_codec: codec{ diff --git a/dts/src/arm64/qcom/msm8992-bullhead-rev-101.dts b/dts/src/arm64/qcom/msm8992-bullhead-rev-101.dts index 32670d5afd..5969b5cfdc 100644 --- a/dts/src/arm64/qcom/msm8992-bullhead-rev-101.dts +++ b/dts/src/arm64/qcom/msm8992-bullhead-rev-101.dts @@ -11,6 +11,7 @@ model = "LG Nexus 5X"; compatible = "lg,bullhead", "qcom,msm8992"; /* required for bootloader to select correct board */ + qcom,msm-id = <251 0>, <252 0>; qcom,board-id = <0xb64 0>; qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; @@ -22,15 +23,6 @@ stdout-path = "serial0:115200n8"; }; - soc { - serial@f991e000 { - status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; - }; - }; - reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -47,4 +39,237 @@ }; }; -#include "msm8994-smd-rpm.dtsi" +&blsp1_uart2 { + status = "okay"; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_l1-supply = <&pm8994_s1>; + vdd_l2_26_28-supply = <&pm8994_s3>; + vdd_l3_11-supply = <&pm8994_s3>; + vdd_l4_27_31-supply = <&pm8994_s3>; + vdd_l5_7-supply = <&pm8994_s3>; + vdd_l6_12_32-supply = <&pm8994_s5>; + vdd_l8_16_30-supply = <&vreg_vph_pwr>; + vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; + vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l14_15-supply = <&pm8994_s5>; + vdd_l17_29-supply = <&vreg_vph_pwr>; + vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l25-supply = <&pm8994_s5>; + vdd_lvs1_2 = <&pm8994_s4>; + + pm8994_s1: s1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + pm8994_s2: s2 { + /* TODO */ + }; + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-system-load = <325000>; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8994_s7: s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l2: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + pm8994_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8994_l5: l5 { + /* TODO */ + }; + + pm8994_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l7: l7 { + /* TODO */ + }; + + pm8994_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l11: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8994_l14: l14 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l18: l18 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l19: l19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + pm8994_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8994_l22: l22 { + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + }; + + pm8994_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + }; + + pm8994_l25: l25 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l26: l26 { + /* TODO: value from downstream + regulator-min-microvolt = <987500>; + fails to apply */ + }; + + pm8994_l27: l27 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8994_l28: l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l29: l29 { + /* TODO: Unsupported voltage range. + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + qcom,init-voltage = <2800000>; + */ + }; + + pm8994_l30: l30 { + /* TODO: get this verified + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + */ + }; + + pm8994_l31: l31 { + regulator-min-microvolt = <1262500>; + regulator-max-microvolt = <1262500>; + }; + + pm8994_l32: l32 { + /* TODO: get this verified + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,init-voltage = <1800000>; + */ + }; + }; +}; + +&sdhc_1 { + status = "okay"; + + mmc-hs400-1_8v; +}; diff --git a/dts/src/arm64/qcom/msm8992-msft-lumia-talkman.dts b/dts/src/arm64/qcom/msm8992-msft-lumia-talkman.dts new file mode 100644 index 0000000000..3cc01f0221 --- /dev/null +++ b/dts/src/arm64/qcom/msm8992-msft-lumia-talkman.dts @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8992.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> + +/ { + model = "Microsoft Lumia 950"; + compatible = "microsoft,talkman", "qcom,msm8992"; + + /* Most Lumia 950 users use GRUB to load their kernels, + * hence there is no need for msm-id and friends. + */ + + /* This enables graphical output via bootloader-enabled display. + * acpi=no is required due to WP platforms having ACPI support, but + * only for Windows-based OSes. + */ + chosen { + bootargs = "earlycon=efifb console=efifb acpi=no"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + }; +}; + +&sdhc_1 { + status = "okay"; + + mmc-hs200-1_8v; +}; diff --git a/dts/src/arm64/qcom/msm8992-pins.dtsi b/dts/src/arm64/qcom/msm8992-pins.dtsi deleted file mode 100644 index c543c718c2..0000000000 --- a/dts/src/arm64/qcom/msm8992-pins.dtsi +++ /dev/null @@ -1,90 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. - */ - -&msmgpio { - blsp1_uart2_default: blsp1_uart2_default { - pinmux { - function = "blsp_uart2"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp1_uart2_sleep: blsp1_uart2_sleep { - pinmux { - function = "gpio"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - /* 0-3 for sdc1 4-6 for sdc2 */ - /* Order of pins */ - /* SDC1: CLK -> 0, CMD -> 1, DATA -> 2, RCLK -> 3 */ - /* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */ - sdc1_clk_on: clk-on { - pinconf { - pins = "sdc1_clk"; - bias-disable = <0>; /* No pull */ - drive-strength = <16>; /* 16mA */ - }; - }; - - sdc1_clk_off: clk-off { - pinconf { - pins = "sdc1_clk"; - bias-disable = <0>; /* No pull */ - drive-strength = <2>; /* 2mA */ - }; - }; - - sdc1_cmd_on: cmd-on { - pinconf { - pins = "sdc1_cmd"; - bias-pull-up; - drive-strength = <8>; - }; - }; - - sdc1_cmd_off: cmd-off { - pinconf { - pins = "sdc1_cmd"; - bias-pull-up = <0x3>; /* same as 3.10 ?? */ - drive-strength = <2>; /* 2mA */ - }; - }; - - sdc1_data_on: data-on { - pinconf { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <8>; /* 8mA */ - }; - }; - - sdc1_data_off: data-off { - pinconf { - pins = "sdc1_data"; - bias-pull-up; - drive-strength = <2>; - }; - }; - - sdc1_rclk_on: rclk-on { - bias-pull-down; /* pull down */ - }; - - sdc1_rclk_off: rclk-off { - bias-pull-down; /* pull down */ - }; -}; diff --git a/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts b/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts new file mode 100644 index 0000000000..4f64ca3ea1 --- /dev/null +++ b/dts/src/arm64/qcom/msm8992-xiaomi-libra.dts @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8992.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> + +/ { + model = "Xiaomi Mi 4C"; + compatible = "xiaomi,libra", "qcom,msm8992"; + /* required for bootloader to select correct board */ + qcom,msm-id = <251 0 252 0>; + qcom,pmic-id = <65545 65546 0 0>; + qcom,board-id = <12 0>; + + /* This enables graphical output via bootloader-enabled display */ + chosen { + bootargs = "earlycon=tty0 console=tty0"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@3404000 { + status= "okay"; + compatible = "simple-framebuffer"; + reg = <0 0x3404000 0 (1080 * 1920 * 3)>; + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button@0 { + label = "Volume Up"; + gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* This is for getting crash logs using Android downstream kernels */ + ramoops@dfc00000 { + compatible = "ramoops"; + reg = <0x0 0xdfc00000 0x0 0x40000>; + console-size = <0x10000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + }; + + continuous_splash: framebuffer@3401000{ + reg = <0x0 0x3401000 0x0 0x2200000>; + no-map; + }; + + dfps_data_mem: dfps_data_mem@3400000 { + reg = <0x0 0x3400000 0x0 0x1000>; + no-map; + }; + + peripheral_region: peripheral_region@7400000 { + reg = <0x0 0x7400000 0x0 0x1c00000>; + no-map; + }; + + modem_region: modem_region@9000000 { + reg = <0x0 0x9000000 0x0 0x5a00000>; + no-map; + }; + + tzapp: modem_region@ea00000 { + reg = <0x0 0xea00000 0x0 0x1900000>; + no-map; + }; + }; +}; + +&blsp_i2c2 { + status = "okay"; + + /* Atmel or Synaptics touchscreen */ +}; + +&blsp_i2c5 { + status = "okay"; + + /* Silabs si4705 FM transmitter */ +}; + +&blsp_i2c6 { + status = "okay"; + + /* NCI NFC, + * TI USB320 Type-C controller, + * Pericom 30216a USB (de)mux switch + */ +}; + +&blsp_i2c7 { + status = "okay"; + + /* cm36686 proximity and ambient light sensor */ +}; + +&blsp_i2c13 { + status = "okay"; + + /* ST lsm6db0 gyro/accelerometer */ +}; + +&blsp2_uart2 { + status = "okay"; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_l1-supply = <&pm8994_s7>; + vdd_l2_26_28-supply = <&pm8994_s3>; + vdd_l3_11-supply = <&pm8994_s3>; + vdd_l4_27_31-supply = <&pm8994_s3>; + vdd_l5_7-supply = <&pm8994_s3>; + vdd_l6_12_32-supply = <&pm8994_s5>; + vdd_l8_16_30-supply = <&vreg_vph_pwr>; + vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; + vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l14_15-supply = <&pm8994_s5>; + vdd_l17_29-supply = <&vreg_vph_pwr>; + vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l25-supply = <&pm8994_s5>; + vdd_lvs1_2 = <&pm8994_s4>; + + pm8994_s1: s1 { + /* unused */ + status = "disabled"; + }; + + pm8994_s2: s2 { + /* unused */ + status = "disabled"; + }; + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + regulator-system-load = <325000>; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8994_s7: s7 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l2: l2 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + + pm8994_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8994_l5: l5 { + /* unused */ + status = "disabled"; + }; + + pm8994_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l7: l7 { + /* unused */ + status = "disabled"; + }; + + pm8994_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l11: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8994_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8994_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l17: l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8994_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + pm8994_l19: l19 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <570000>; + }; + + pm8994_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + }; + + pm8994_l22: l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8994_l23: l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3150000>; + }; + + pm8994_l25: l25 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l26: l26 { + regulator-min-microvolt = <987500>; + regulator-max-microvolt = <987500>; + + }; + + pm8994_l27: l27 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8994_l28: l28 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + pm8994_l29: l29 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8994_l30: l30 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8994_l31: l31 { + regulator-min-microvolt = <1262500>; + regulator-max-microvolt = <1262500>; + }; + + pm8994_l32: l32 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; +}; + +&sdhc_1 { + status = "okay"; + + mmc-hs400-1_8v; + vmmc-supply = <&pm8994_l20>; + vqmmc-supply = <&pm8994_s4>; +}; diff --git a/dts/src/arm64/qcom/msm8992.dtsi b/dts/src/arm64/qcom/msm8992.dtsi index 2021795c99..188fff2095 100644 --- a/dts/src/arm64/qcom/msm8992.dtsi +++ b/dts/src/arm64/qcom/msm8992.dtsi @@ -6,10 +6,6 @@ #include <dt-bindings/clock/qcom,gcc-msm8994.h> / { - model = "Qualcomm Technologies, Inc. MSM 8992"; - compatible = "qcom,msm8992"; - // msm-id needed by bootloader for selecting correct blob - qcom,msm-id = <251 0>, <252 0>; interrupt-parent = <&intc>; #address-cells = <2>; @@ -20,55 +16,139 @@ cpus { #address-cells = <2>; #size-cells = <0>; - cpu-map { - cluster0 { - core0 { - cpu = <&CPU0>; - }; - }; - }; CPU0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0 0x0>; next-level-cache = <&L2_0>; + enable-method = "psci"; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; }; }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + next-level-cache = <&L2_1>; + enable-method = "psci"; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + next-level-cache = <&L2_1>; + enable-method = "psci"; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + }; + }; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8994", "qcom,scm"; + }; }; - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; }; - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>; }; - vreg_vph_pwr: vreg-vph-pwr { - compatible = "regulator-fixed"; - status = "okay"; - regulator-name = "vph-pwr"; + psci { + compatible = "arm,psci-0.2"; + method = "hvc"; + }; - regulator-min-microvolt = <3600000>; - regulator-max-microvolt = <3600000>; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; - regulator-always-on; + smem_region: smem@6a00000 { + reg = <0x0 0x6a00000 0x0 0x200000>; + no-map; + }; }; sfpb_mutex: hwmutex { @@ -98,9 +178,10 @@ <0xf9002000 0x1000>; }; - apcs: syscon@f900d000 { - compatible = "syscon"; + apcs: mailbox@f900d000 { + compatible = "qcom,msm8994-apcs-kpss-global", "syscon"; reg = <0xf900d000 0x2000>; + #mbox-cells = <1>; }; timer@f9020000 { @@ -161,63 +242,147 @@ }; }; - restart@fc4ab000 { - compatible = "qcom,pshold"; - reg = <0xfc4ab000 0x4>; - }; + sdhc_1: sdhci@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8994-pinctrl"; - reg = <0xfd510000 0x4000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - gpio-ranges = <&msmgpio 0 0 146>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on + &sdc1_rclk_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off + &sdc1_rclk_off>; + + regulator-always-on; + bus-width = <8>; + non-removable; + + status = "disabled"; }; blsp1_uart2: serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>; - status = "disabled"; clock-names = "core", "iface"; - clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>, - <&clock_gcc GCC_BLSP1_AHB_CLK>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + status = "disabled"; }; - clock_gcc: clock-controller@fc400000 { - compatible = "qcom,gcc-msm8994"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfc400000 0x2000>; + blsp_i2c2: i2c@f9924000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9924000 0x500>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - sdhci1: mmc@f9824900 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; + /* Somebody was very creative with their numbering scheme downstream... */ - interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>, - <GIC_SPI 138 IRQ_TYPE_NONE>; - interrupt-names = "hc_irq", "pwr_irq"; + blsp_i2c13: i2c@f9927000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9927000 0x500>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c13_default>; + pinctrl-1 = <&i2c13_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c6: i2c@f9928000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9928000 0x500>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>, - <&clock_gcc GCC_SDCC1_AHB_CLK>; + blsp2_uart2: serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupt = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>; clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_default>; + pinctrl-1 = <&blsp2_uart2_sleep>; + status = "disabled"; + }; + blsp_i2c7: i2c@f9963000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9963000 0x500>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on - &sdc1_rclk_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off - &sdc1_rclk_off>; + pinctrl-0 = <&i2c7_default>; + pinctrl-1 = <&i2c7_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - regulator-always-on; - bus-width = <8>; - mmc-hs400-1_8v; - status = "okay"; + blsp_i2c5: i2c@f9967000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9967000 0x500>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <100000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8994"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x2000>; }; rpm_msg_ram: memory@fc428000 { @@ -225,27 +390,189 @@ reg = <0xfc428000 0x4000>; }; + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; + + spmi_bus: spmi@fc4c0000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + reg-names = "core", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + sfpb_mutex_regs: syscon@fd484000 { #address-cells = <1>; #size-cells = <1>; compatible = "syscon"; reg = <0xfd484000 0x400>; }; - }; - memory { - device_type = "memory"; - reg = <0 0 0 0>; // bootloader will update - }; + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8994-pinctrl"; + reg = <0xfd510000 0x4000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; + blsp1_uart2_default: blsp1-uart2-default { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; - smem_region: smem@6a00000 { - reg = <0x0 0x6a00000 0x0 0x200000>; - no-map; + blsp1_uart2_sleep: blsp1-uart2-sleep { + function = "gpio"; + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_uart2_default: blsp2-uart2-default { + function = "blsp_uart8"; + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_uart2_sleep: blsp2-uart2-sleep { + function = "gpio"; + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + drive-strength = <2>; + bias-pull-down; + }; + + sdc1_clk_on: clk-on { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <6>; + }; + + sdc1_clk_off: clk-off { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_cmd_on: cmd-on { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <6>; + }; + + sdc1_cmd_off: cmd-off { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_data_on: data-on { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <6>; + }; + + sdc1_data_off: data-off { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_rclk_on: rclk-on { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc1_rclk_off: rclk-off { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + i2c2_default: i2c2-default { + function = "blsp_i2c2"; + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable; + }; + + i2c2_sleep: i2c2-sleep { + function = "gpio"; + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_default: i2c5-default { + /* Don't be fooled! Nobody knows the reason why though... */ + function = "blsp_i2c11"; + pins = "gpio83", "gpio84"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_sleep: i2c5-sleep { + function = "gpio"; + pins = "gpio83", "gpio84"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_default: i2c6-default { + function = "blsp_i2c6"; + pins = "gpio28", "gpio27"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_sleep: i2c6-sleep { + function = "gpio"; + pins = "gpio28", "gpio27"; + drive-strength = <2>; + bias-disable; + }; + + i2c7_default: i2c7-default { + function = "blsp_i2c7"; + pins = "gpio43", "gpio44"; + drive-strength = <2>; + bias-disable; + }; + + i2c7_sleep: i2c7-sleep { + function = "gpio"; + pins = "gpio43", "gpio44"; + drive-strength = <2>; + bias-disable; + }; + + i2c13_default: i2c13-default { + /* Not a typo either. */ + function = "blsp_i2c5"; + pins = "gpio23", "gpio24"; + drive-strength = <2>; + bias-disable; + }; + + i2c13_sleep: i2c13-sleep { + function = "gpio"; + pins = "gpio23", "gpio24"; + drive-strength = <2>; + bias-disable; + }; }; }; @@ -258,58 +585,35 @@ qcom,local-pid = <0>; qcom,remote-pid = <6>; - rpm-requests { + rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8994"; qcom,smd-channels = "rpm_requests"; - pm8994-regulators { - compatible = "qcom,rpm-pm8994-regulators"; - - pm8994_s1: s1 {}; - pm8994_s2: s2 {}; - pm8994_s3: s3 {}; - pm8994_s4: s4 {}; - pm8994_s5: s5 {}; - pm8994_s6: s6 {}; - pm8994_s7: s7 {}; - - pm8994_l1: l1 {}; - pm8994_l2: l2 {}; - pm8994_l3: l3 {}; - pm8994_l4: l4 {}; - pm8994_l6: l6 {}; - pm8994_l8: l8 {}; - pm8994_l9: l9 {}; - pm8994_l10: l10 {}; - pm8994_l11: l11 {}; - pm8994_l12: l12 {}; - pm8994_l13: l13 {}; - pm8994_l14: l14 {}; - pm8994_l15: l15 {}; - pm8994_l16: l16 {}; - pm8994_l17: l17 {}; - pm8994_l18: l18 {}; - pm8994_l19: l19 {}; - pm8994_l20: l20 {}; - pm8994_l21: l21 {}; - pm8994_l22: l22 {}; - pm8994_l23: l23 {}; - pm8994_l24: l24 {}; - pm8994_l25: l25 {}; - pm8994_l26: l26 {}; - pm8994_l27: l27 {}; - pm8994_l28: l28 {}; - pm8994_l29: l29 {}; - pm8994_l30: l30 {}; - pm8994_l31: l31 {}; - pm8994_l32: l32 {}; - - pm8994_lvs1: lvs1 {}; - pm8994_lvs2: lvs2 {}; + rpmcc: rpmcc { + compatible = "qcom,rpmcc-msm8992"; + #clock-cells = <1>; }; }; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + status = "okay"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; -#include "msm8992-pins.dtsi" diff --git a/dts/src/arm64/qcom/msm8994-angler-rev-101.dts b/dts/src/arm64/qcom/msm8994-angler-rev-101.dts index a5f9a6ab51..baa55643b4 100644 --- a/dts/src/arm64/qcom/msm8994-angler-rev-101.dts +++ b/dts/src/arm64/qcom/msm8994-angler-rev-101.dts @@ -11,6 +11,8 @@ model = "Huawei Nexus 6P"; compatible = "huawei,angler", "qcom,msm8994"; /* required for bootloader to select correct board */ + qcom,msm-id = <207 0x20000>; + qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; qcom,board-id = <8026 0>; aliases { diff --git a/dts/src/arm64/qcom/msm8994-pins.dtsi b/dts/src/arm64/qcom/msm8994-pins.dtsi deleted file mode 100644 index 2e118d967f..0000000000 --- a/dts/src/arm64/qcom/msm8994-pins.dtsi +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. - */ - -&msmgpio { - blsp1_uart2_default: blsp1_uart2_default { - pinmux { - function = "blsp_uart2"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp1_uart2_sleep: blsp1_uart2_sleep { - pinmux { - function = "gpio"; - pins = "gpio4", "gpio5"; - }; - pinconf { - pins = "gpio4", "gpio5"; - drive-strength = <2>; - bias-pull-down; - }; - }; -}; diff --git a/dts/src/arm64/qcom/msm8994-smd-rpm.dtsi b/dts/src/arm64/qcom/msm8994-smd-rpm.dtsi deleted file mode 100644 index 31e3eb6ab5..0000000000 --- a/dts/src/arm64/qcom/msm8994-smd-rpm.dtsi +++ /dev/null @@ -1,268 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* Copyright (c) 2015, LGE Inc. All rights reserved. - * Copyright (c) 2016, The Linux Foundation. All rights reserved. - */ - -&smd_rpm { - rpm { - rpm_requests { - pm8994-regulators { - - vdd_l1-supply = <&pm8994_s1>; - vdd_l2_26_28-supply = <&pm8994_s3>; - vdd_l3_11-supply = <&pm8994_s3>; - vdd_l4_27_31-supply = <&pm8994_s3>; - vdd_l5_7-supply = <&pm8994_s3>; - vdd_l6_12_32-supply = <&pm8994_s5>; - vdd_l8_16_30-supply = <&vreg_vph_pwr>; - vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; - vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; - vdd_l14_15-supply = <&pm8994_s5>; - vdd_l17_29-supply = <&vreg_vph_pwr>; - vdd_l20_21-supply = <&vreg_vph_pwr>; - vdd_l25-supply = <&pm8994_s5>; - vdd_lvs1_2 = <&pm8994_s4>; - - s1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - }; - - s2 { - /* TODO */ - }; - - s3 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - }; - - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-allow-set-load; - regulator-system-load = <325000>; - }; - - s5 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - }; - - s7 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - l1 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - l2 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - }; - - l3 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - /* TODO */ - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l7 { - /* TODO */ - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - }; - - l11 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - qcom,init-voltage = <1200000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - proxy-supply = <&pm8994_l12>; - qcom,proxy-consumer-enable; - qcom,proxy-consumer-current = <10000>; - status = "okay"; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - qcom,init-voltage = <2950000>; - status = "okay"; - }; - - l14 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - qcom,init-voltage = <1200000>; - proxy-supply = <&pm8994_l14>; - qcom,proxy-consumer-enable; - qcom,proxy-consumer-current = <10000>; - status = "okay"; - }; - - l15 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - status = "okay"; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - qcom,init-voltage = <2700000>; - status = "okay"; - }; - - l17 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - qcom,init-voltage = <2700000>; - status = "okay"; - }; - - l18 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - qcom,init-voltage = <3000000>; - qcom,init-ldo-mode = <1>; - }; - - l19 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - status = "okay"; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-always-on; - regulator-boot-on; - regulator-allow-set-load; - regulator-system-load = <570000>; - }; - - l21 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - qcom,init-voltage = <1800000>; - }; - - l22 { - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3100000>; - qcom,init-voltage = <3100000>; - }; - - l23 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - qcom,init-voltage = <2800000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3150000>; - qcom,init-voltage = <3075000>; - }; - - l25 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - }; - - l26 { - /* TODO: value from downstream - regulator-min-microvolt = <987500>; - fails to apply */ - }; - - l27 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - qcom,init-voltage = <1050000>; - }; - - l28 { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - qcom,init-voltage = <1000000>; - proxy-supply = <&pm8994_l28>; - qcom,proxy-consumer-enable; - qcom,proxy-consumer-current = <10000>; - }; - - l29 { - /* TODO: Unsupported voltage range. - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - qcom,init-voltage = <2800000>; - */ - }; - - l30 { - /* TODO: get this verified - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - */ - }; - - l31 { - regulator-min-microvolt = <1262500>; - regulator-max-microvolt = <1262500>; - qcom,init-voltage = <1262500>; - }; - - l32 { - /* TODO: get this verified - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,init-voltage = <1800000>; - */ - }; - }; - }; - }; -}; diff --git a/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami-sumire.dts new file mode 100644 index 0000000000..5d6bbbf6c1 --- /dev/null +++ b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami-sumire.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "msm8994-sony-xperia-kitakami.dtsi" + +/ { + model = "Sony Xperia Z5"; + compatible = "sony,sumire-row", "qcom,msm8994"; +}; diff --git a/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi new file mode 100644 index 0000000000..4032b7478f --- /dev/null +++ b/dts/src/arm64/qcom/msm8994-sony-xperia-kitakami.dtsi @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +#include "msm8994.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <0xcf 0x20001>; + qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>; + qcom,board-id = <8 0>; + + /* Kitakami firmware doesn't support PSCI */ + /delete-node/ psci; + + gpio_keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button@0 { + label = "Volume Down"; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; + debounce-interval = <15>; + }; + + button@1 { + label = "Volume Up"; + gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + + button@2 { + label = "Camera Snapshot"; + gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + wakeup-source; + debounce-interval = <15>; + }; + + button@3 { + label = "Camera Focus"; + gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* This is for getting crash logs using Android downstream kernels */ + ramoops@1fe00000 { + compatible = "ramoops"; + reg = <0x0 0x1fe00000 0x0 0x200000>; + console-size = <0x100000>; + record-size = <0x10000>; + ftrace-size = <0x10000>; + pmsg-size = <0x80000>; + }; + + continuous_splash: framebuffer@3401000{ + reg = <0x0 0x3401000 0x0 0x2200000>; + no-map; + }; + + dfps_data_mem: dfps_data_mem@3400000 { + reg = <0x0 0x3400000 0x0 0x1000>; + no-map; + }; + + peripheral_region: peripheral_region@7400000 { + reg = <0x0 0x7400000 0x0 0x1c00000>; + no-map; + }; + + modem_region: modem_region@9000000 { + reg = <0x0 0x9000000 0x0 0x5a00000>; + no-map; + }; + + tzapp: modem_region@ea00000 { + reg = <0x0 0xea00000 0x0 0x1900000>; + no-map; + }; + + fb_region: fb_region@40000000 { + reg = <0x00 0x40000000 0x00 0x1000000>; + no-map; + }; + }; +}; + +&blsp_spi0 { + status = "okay"; + + /* FPC fingerprint reader */ +}; + +/* I2C1 is disabled on this board */ + +&blsp_i2c2 { + status = "okay"; + + /* NXP NFC */ +}; + +&blsp_i2c4 { + status = "okay"; + + /* Empty but active */ +}; + +&blsp_i2c5 { + status = "okay"; + + /* SMB1357 charger and sii8620 HDMI/MHL bridge */ +}; + +&blsp_i2c6 { + status = "okay"; + + /* Synaptics touchscreen */ +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_uart2 { + status = "okay"; +}; + +&rpm_requests { + pm8994_regulators: pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + vdd_l1-supply = <&pm8994_s1>; + vdd_l2_26_28-supply = <&pm8994_s3>; + vdd_l3_11-supply = <&pm8994_s3>; + vdd_l4_27_31-supply = <&pm8994_s3>; + vdd_l5_7-supply = <&pm8994_s3>; + vdd_l6_12_32-supply = <&pm8994_s5>; + vdd_l8_16_30-supply = <&vreg_vph_pwr>; + vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; + vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; + vdd_l14_15-supply = <&pm8994_s5>; + vdd_l17_29-supply = <&vreg_vph_pwr>; + vdd_l20_21-supply = <&vreg_vph_pwr>; + vdd_l25-supply = <&pm8994_s5>; + vdd_lvs1_2 = <&pm8994_s4>; + + pm8994_s1: s1 {}; + pm8994_s2: s2 {}; + pm8994_s3: s3 {}; + pm8994_s4: s4 {}; + pm8994_s5: s5 {}; + pm8994_s6: s6 {}; + pm8994_s7: s7 {}; + + pm8994_l1: l1 {}; + pm8994_l2: l2 {}; + pm8994_l3: l3 {}; + pm8994_l4: l4 {}; + pm8994_l6: l6 {}; + pm8994_l8: l8 {}; + pm8994_l9: l9 {}; + pm8994_l10: l10 {}; + pm8994_l11: l11 {}; + pm8994_l12: l12 {}; + pm8994_l13: l13 {}; + pm8994_l14: l14 {}; + pm8994_l15: l15 {}; + pm8994_l16: l16 {}; + pm8994_l17: l17 {}; + pm8994_l18: l18 {}; + pm8994_l19: l19 {}; + pm8994_l20: l20 {}; + pm8994_l21: l21 {}; + pm8994_l22: l22 {}; + pm8994_l23: l23 {}; + pm8994_l24: l24 {}; + pm8994_l25: l25 {}; + pm8994_l26: l26 {}; + pm8994_l27: l27 {}; + pm8994_l28: l28 {}; + pm8994_l29: l29 {}; + pm8994_l30: l30 {}; + pm8994_l31: l31 {}; + pm8994_l32: l32 {}; + + pm8994_lvs1: lvs1 {}; + pm8994_lvs2: lvs2 {}; + }; + + pmi8994_regulators: pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + pmi8994_s1: s1 {}; + pmi8994_s2: s2 {}; + pmi8994_s3: s3 {}; + pmi8994_bby: boost-bypass {}; + }; +}; + +&sdhc1 { + status = "okay"; + + /* Downstream pushes 2.95V to the sdhci device, + * but upstream driver REALLY wants to make vmmc 1.8v + * cause of the hs400-1_8v mode. MMC works fine without + * that regulator, so let's not use it for now. + * vqmmc is also disabled cause driver stll complains. + * + * vmmc-supply = <&pm8994_l20>; + * vqmmc-supply = <&pm8994_s4>; + */ +}; diff --git a/dts/src/arm64/qcom/msm8994.dtsi b/dts/src/arm64/qcom/msm8994.dtsi index b1c2d7d6a0..6707f89860 100644 --- a/dts/src/arm64/qcom/msm8994.dtsi +++ b/dts/src/arm64/qcom/msm8994.dtsi @@ -6,12 +6,6 @@ #include <dt-bindings/clock/qcom,gcc-msm8994.h> / { - model = "Qualcomm Technologies, Inc. MSM 8994"; - compatible = "qcom,msm8994"; - // msm-id and pmic-id are required by bootloader for - // proper selection of dt blob - qcom,msm-id = <207 0x20000>; - qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; interrupt-parent = <&intc>; #address-cells = <2>; @@ -19,35 +13,194 @@ chosen { }; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + cpus { - #address-cells = <1>; + #address-cells = <2>; #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&L2_0>; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + CPU6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + + CPU7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&L2_1>; + }; + cpu-map { cluster0 { core0 { cpu = <&CPU0>; }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; }; }; + }; - CPU0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53"; - reg = <0x0>; - next-level-cache = <&L2_0>; - L2_0: l2-cache { - compatible = "cache"; - cache-level = <2>; + firmware { + scm { + compatible = "qcom,scm-msm8994", "qcom,scm"; + }; + }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "hvc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + smem_mem: smem_region@6a00000 { + reg = <0x0 0x6a00000 0x0 0x200000>; + no-map; + }; + }; + + smd { + compatible = "qcom,smd"; + rpm { + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + qcom,local-pid = <0>; + qcom,remote-pid = <6>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8994"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: rpmcc { + compatible = "qcom,rpmcc-msm8994"; + #clock-cells = <1>; + }; }; }; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 2 0xff08>, - <1 3 0xff08>, - <1 4 0xff08>, - <1 1 0xff08>; + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + hwlocks = <&tcsr_mutex 3>; }; soc: soc { @@ -62,7 +215,13 @@ interrupt-controller; #interrupt-cells = <3>; reg = <0xf9000000 0x1000>, - <0xf9002000 0x1000>; + <0xf9002000 0x1000>; + }; + + apcs: mailbox@f900d000 { + compatible = "qcom,msm8994-apcs-kpss-global", "syscon"; + reg = <0xf900d000 0x2000>; + #mbox-cells = <1>; }; timer@f9020000 { @@ -123,72 +282,407 @@ }; }; - restart@fc4ab000 { - compatible = "qcom,pshold"; - reg = <0xfc4ab000 0x4>; + sdhc1: sdhci@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; + + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; + + bus-width = <8>; + non-removable; + status = "disabled"; }; - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8994-pinctrl"; - reg = <0xfd510000 0x4000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - gpio-ranges = <&msmgpio 0 0 146>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; + blsp1_dma: dma@f9904000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0xf9904000 0x19000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; }; blsp1_uart2: serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; status = "disabled"; + }; + + blsp_i2c1: i2c@f9923000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9923000 0x500>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_default>; + pinctrl-1 = <&i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi0: spi@f9923000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0xf9923000 0x500>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; - clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>, - <&clock_gcc GCC_BLSP1_AHB_CLK>; + spi-max-frequency = <19200000>; + dmas = <&blsp1_dma 12>, <&blsp1_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_spi0_default>; + pinctrl-1 = <&blsp1_spi0_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - tcsr_mutex_regs: syscon@fd484000 { - compatible = "syscon"; - reg = <0xfd484000 0x2000>; + blsp_i2c2: i2c@f9924000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9924000 0x500>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <355000>; + dmas = <&blsp1_dma 14>, <&blsp1_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* I2C3 doesn't exist */ + + blsp_i2c4: i2c@f9926000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9926000 0x500>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <355000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_default>; + pinctrl-1 = <&i2c4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_dma: dma@f9944000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0xf9944000 0x19000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + + /* According to downstream kernels, i2c6 + * comes before i2c5 address-wise... + */ + + blsp_i2c6: i2c@f9928000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9928000 0x500>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <355000>; + dmas = <&blsp1_dma 22>, <&blsp1_dma 23>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_uart2: serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupts = <GIC_SPI 146 IRQ_TYPE_EDGE_FALLING>; + clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + dmas = <&blsp2_dma 2>, <&blsp2_dma 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_default>; + pinctrl-1 = <&blsp2_uart2_sleep>; + status = "disabled"; }; - clock_gcc: clock-controller@fc400000 { + blsp_i2c5: i2c@f9967000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9967000 0x500>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <355000>; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + gcc: clock-controller@fc400000 { compatible = "qcom,gcc-msm8994"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; reg = <0xfc400000 0x2000>; }; - }; - memory { - device_type = "memory"; - // We expect the bootloader to fill in the reg - reg = <0 0 0 0>; - }; + rpm_msg_ram: memory@fc428000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0xfc428000 0x4000>; + }; - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; - }; + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + spmi_bus: spmi@fc4c0000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + reg-names = "core", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; + tcsr_mutex_regs: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; - smem_mem: smem_region@6a00000 { - reg = <0x0 0x6a00000 0x0 0x200000>; - no-map; + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8994-pinctrl"; + reg = <0xfd510000 0x4000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_uart2_default: blsp1-uart2-default { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep { + function = "gpio"; + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_uart2_default: blsp2-uart2-default { + function = "blsp_uart8"; + pins = "gpio45", "gpio46"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart2_sleep: blsp2-uart2-sleep { + function = "gpio"; + pins = "gpio45", "gpio46"; + drive-strength = <2>; + bias-pull-down; + }; + + i2c1_default: i2c1-default { + function = "blsp_i2c1"; + pins = "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + + i2c1_sleep: i2c1-sleep { + function = "gpio"; + pins = "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + + i2c2_default: i2c2-default { + function = "blsp_i2c2"; + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable; + }; + + i2c2_sleep: i2c2-sleep { + function = "gpio"; + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable; + }; + + i2c4_default: i2c4-default { + function = "blsp_i2c4"; + pins = "gpio19", "gpio20"; + drive-strength = <2>; + bias-disable; + }; + + i2c4_sleep: i2c4-sleep { + function = "gpio"; + pins = "gpio19", "gpio20"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + + i2c5_default: i2c5-default { + function = "blsp_i2c5"; + pins = "gpio23", "gpio24"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_sleep: i2c5-sleep { + function = "gpio"; + pins = "gpio23", "gpio24"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_default: i2c6-default { + function = "blsp_i2c6"; + pins = "gpio28", "gpio27"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_sleep: i2c6-sleep { + function = "gpio"; + pins = "gpio28", "gpio27"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_spi0_default: blsp1-spi0-default { + default { + function = "blsp_spi1"; + pins = "gpio0", "gpio1", "gpio3"; + drive-strength = <10>; + bias-pull-down; + }; + cs { + function = "gpio"; + pins = "gpio8"; + drive-strength = <2>; + bias-disable; + }; + }; + + blsp1_spi0_sleep: blsp1-spi0-sleep { + pins = "gpio0", "gpio1", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_clk_on: clk-on { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + sdc1_clk_off: clk-off { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_cmd_on: cmd-on { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <8>; + }; + + sdc1_cmd_off: cmd-off { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_data_on: data-on { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <8>; + }; + + sdc1_data_off: data-off { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_rclk_on: rclk-on { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc1_rclk_off: rclk-off { + pins = "sdc1_rclk"; + bias-pull-down; + }; }; }; @@ -198,12 +692,22 @@ #hwlock-cells = <1>; }; - qcom,smem@6a00000 { - compatible = "qcom,smem"; - memory-region = <&smem_mem>; - hwlocks = <&tcsr_mutex 3>; + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 0xff08>, + <GIC_PPI 3 0xff08>, + <GIC_PPI 4 0xff08>, + <GIC_PPI 1 0xff08>; }; -}; + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; +}; -#include "msm8994-pins.dtsi" diff --git a/dts/src/arm64/qcom/msm8998-clamshell.dtsi b/dts/src/arm64/qcom/msm8998-clamshell.dtsi index 6ab830d018..00d84fb217 100644 --- a/dts/src/arm64/qcom/msm8998-clamshell.dtsi +++ b/dts/src/arm64/qcom/msm8998-clamshell.dtsi @@ -202,7 +202,7 @@ regulator-min-microvolt = <1880000>; regulator-max-microvolt = <1880000>; }; - vreg_15a_1p8: l15 { + vreg_l15a_1p8: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; diff --git a/dts/src/arm64/qcom/msm8998-lenovo-miix-630.dts b/dts/src/arm64/qcom/msm8998-lenovo-miix-630.dts index 407c6a3291..89492ed519 100644 --- a/dts/src/arm64/qcom/msm8998-lenovo-miix-630.dts +++ b/dts/src/arm64/qcom/msm8998-lenovo-miix-630.dts @@ -25,6 +25,11 @@ }; }; +&remoteproc_mss { + firmware-name = "qcom/LENOVO/81F1/qcdsp1v28998.mbn", + "qcom/LENOVO/81F1/qcdsp28998.mbn"; +}; + &sdhc2 { cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; }; diff --git a/dts/src/arm64/qcom/msm8998-mtp.dtsi b/dts/src/arm64/qcom/msm8998-mtp.dtsi index 8a14b2bf7b..cec42437b3 100644 --- a/dts/src/arm64/qcom/msm8998-mtp.dtsi +++ b/dts/src/arm64/qcom/msm8998-mtp.dtsi @@ -235,7 +235,7 @@ regulator-min-microvolt = <1880000>; regulator-max-microvolt = <1880000>; }; - vreg_15a_1p8: l15 { + vreg_l15a_1p8: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; diff --git a/dts/src/arm64/qcom/pm660.dtsi b/dts/src/arm64/qcom/pm660.dtsi new file mode 100644 index 0000000000..ea0e9558d0 --- /dev/null +++ b/dts/src/arm64/qcom/pm660.dtsi @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + + pmic@0 { + compatible = "qcom,pm660", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pon: pon@800 { + compatible = "qcom,pm8916-pon"; + + reg = <0x800>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + }; + + pm660_gpios: gpios@c000 { + compatible = "qcom,pm660-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm660_gpios 0 0 13>; + #gpio-cells = <2>; + interrupt-controller; + interrupt-cells =<2>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/pm660l.dtsi b/dts/src/arm64/qcom/pm660l.dtsi new file mode 100644 index 0000000000..edba6de020 --- /dev/null +++ b/dts/src/arm64/qcom/pm660l.dtsi @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + + pmic@2 { + compatible = "qcom,pm660l", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm660l_gpios: gpios@c000 { + compatible = "qcom,pm660l-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm660l_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@3 { + compatible = "qcom,pm660l", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; + diff --git a/dts/src/arm64/qcom/pm8009.dtsi b/dts/src/arm64/qcom/pm8009.dtsi new file mode 100644 index 0000000000..b126d7e7e4 --- /dev/null +++ b/dts/src/arm64/qcom/pm8009.dtsi @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020, Linaro Limited + */ + +#include <dt-bindings/spmi/spmi.h> + +&spmi_bus { + pmic@a { + compatible = "qcom,pm8009", "qcom,spmi-pmic"; + reg = <0xa SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8009_pon: pon@800 { + compatible = "qcom,pm8916-pon"; + reg = <0x0800>; + }; + + pm8009_gpios: gpio@c000 { + compatible = "qcom,pm8005-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmic@b { + compatible = "qcom,pm8009", "qcom,spmi-pmic"; + reg = <0xb SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/dts/src/arm64/qcom/pm8150.dtsi b/dts/src/arm64/qcom/pm8150.dtsi index c0b1974586..1b64069275 100644 --- a/dts/src/arm64/qcom/pm8150.dtsi +++ b/dts/src/arm64/qcom/pm8150.dtsi @@ -9,6 +9,37 @@ #include <dt-bindings/spmi/spmi.h> #include <dt-bindings/iio/qcom,spmi-vadc.h> +/ { + thermal-zones { + pm8150 { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8150_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pm8150_0: pmic@0 { compatible = "qcom,pm8150", "qcom,spmi-pmic"; @@ -30,6 +61,15 @@ }; }; + pm8150_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm8150_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + pm8150_adc: adc@3100 { compatible = "qcom,spmi-adc5"; reg = <0x3100>; @@ -38,8 +78,6 @@ #io-channel-cells = <1>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - ref-gnd@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; diff --git a/dts/src/arm64/qcom/pm8150b.dtsi b/dts/src/arm64/qcom/pm8150b.dtsi index 40b5d75a4a..e112e8876d 100644 --- a/dts/src/arm64/qcom/pm8150b.dtsi +++ b/dts/src/arm64/qcom/pm8150b.dtsi @@ -8,6 +8,37 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm8150b { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8150b_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pmic@2 { compatible = "qcom,pm8150b", "qcom,spmi-pmic"; @@ -22,7 +53,16 @@ status = "disabled"; }; - adc@3100 { + pm8150b_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm8150b_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8150b_adc: adc@3100 { compatible = "qcom,spmi-adc5"; reg = <0x3100>; #address-cells = <1>; @@ -30,8 +70,6 @@ #io-channel-cells = <1>; interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - ref-gnd@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; diff --git a/dts/src/arm64/qcom/pm8150l.dtsi b/dts/src/arm64/qcom/pm8150l.dtsi index cf05e0685d..62139538b7 100644 --- a/dts/src/arm64/qcom/pm8150l.dtsi +++ b/dts/src/arm64/qcom/pm8150l.dtsi @@ -8,6 +8,37 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> +/ { + thermal-zones { + pm8150l { + polling-delay-passive = <100>; + polling-delay = <0>; + + thermal-sensors = <&pm8150l_temp>; + + trips { + trip0 { + temperature = <95000>; + hysteresis = <0>; + type = "passive"; + }; + + trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "hot"; + }; + + trip2 { + temperature = <145000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; +}; + &spmi_bus { pmic@4 { compatible = "qcom,pm8150l", "qcom,spmi-pmic"; @@ -22,7 +53,16 @@ status = "disabled"; }; - adc@3100 { + pm8150l_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>; + io-channels = <&pm8150l_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8150l_adc: adc@3100 { compatible = "qcom,spmi-adc5"; reg = <0x3100>; #address-cells = <1>; @@ -30,8 +70,6 @@ #io-channel-cells = <1>; interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; - ref-gnd@0 { reg = <ADC5_REF_GND>; qcom,pre-scaling = <1 1>; diff --git a/dts/src/arm64/qcom/pmi8998.dtsi b/dts/src/arm64/qcom/pmi8998.dtsi index 23f9146a16..d016b12967 100644 --- a/dts/src/arm64/qcom/pmi8998.dtsi +++ b/dts/src/arm64/qcom/pmi8998.dtsi @@ -25,5 +25,17 @@ reg = <0x3 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + labibb { + compatible = "qcom,pmi8998-lab-ibb"; + + ibb: ibb { + interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>; + }; + + lab: lab { + interrupts = <0x3 0xde 0x0 IRQ_TYPE_EDGE_RISING>; + }; + }; }; }; diff --git a/dts/src/arm64/qcom/qcs404.dtsi b/dts/src/arm64/qcom/qcs404.dtsi index c685a16648..b654b802e9 100644 --- a/dts/src/arm64/qcom/qcs404.dtsi +++ b/dts/src/arm64/qcom/qcs404.dtsi @@ -1097,6 +1097,21 @@ status = "disabled"; }; + imem@8600000 { + compatible = "simple-mfd"; + reg = <0x08600000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0x08600000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + intc: interrupt-controller@b000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; diff --git a/dts/src/arm64/qcom/sc7180-idp.dts b/dts/src/arm64/qcom/sc7180-idp.dts index 4e9149d82d..d8b550723b 100644 --- a/dts/src/arm64/qcom/sc7180-idp.dts +++ b/dts/src/arm64/qcom/sc7180-idp.dts @@ -21,6 +21,7 @@ bluetooth0 = &bluetooth; hsuart0 = &uart3; serial0 = &uart8; + wifi0 = &wifi; }; chosen { @@ -287,6 +288,10 @@ }; }; +&qfprom { + vcc-supply = <&vreg_l11a_1p8>; +}; + &qspi { status = "okay"; pinctrl-names = "default"; @@ -312,7 +317,7 @@ &remoteproc_mpss { status = "okay"; compatible = "qcom,sc7180-mss-pil"; - iommus = <&apps_smmu 0x460 0x1>, <&apps_smmu 0x444 0x3>; + iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>; memory-region = <&mba_mem &mpss_mem>; }; @@ -389,6 +394,18 @@ }; }; +&wifi { + status = "okay"; + vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>; + vdd-1.8-xo-supply = <&vreg_l1c_1p8>; + vdd-1.3-rfa-supply = <&vreg_l2c_1p3>; + vdd-3.3-ch0-supply = <&vreg_l10c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l11c_3p3>; + wifi-firmware { + iommus = <&apps_smmu 0xc2 0x1>; + }; +}; + /* PINCTRL - additions to nodes defined in sc7180.dtsi */ &qspi_clk { diff --git a/dts/src/arm64/qcom/sc7180.dtsi b/dts/src/arm64/qcom/sc7180.dtsi index 31b9217bb5..d46b3833e5 100644 --- a/dts/src/arm64/qcom/sc7180.dtsi +++ b/dts/src/arm64/qcom/sc7180.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/clock/qcom,gpucc-sc7180.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sc7180.h> +#include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sc7180.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/phy/phy-qcom-qusb2.h> @@ -130,6 +131,9 @@ &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; next-level-cache = <&L2_0>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; @@ -153,6 +157,9 @@ capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; next-level-cache = <&L2_100>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; L2_100: l2-cache { @@ -172,6 +179,9 @@ capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; next-level-cache = <&L2_200>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; L2_200: l2-cache { @@ -191,6 +201,9 @@ capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; next-level-cache = <&L2_300>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; L2_300: l2-cache { @@ -210,6 +223,9 @@ capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; next-level-cache = <&L2_400>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; L2_400: l2-cache { @@ -229,6 +245,9 @@ capacity-dmips-mhz = <1024>; dynamic-power-coefficient = <100>; next-level-cache = <&L2_500>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 0>; L2_500: l2-cache { @@ -248,6 +267,9 @@ capacity-dmips-mhz = <1740>; dynamic-power-coefficient = <405>; next-level-cache = <&L2_600>; + operating-points-v2 = <&cpu6_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 1>; L2_600: l2-cache { @@ -267,6 +289,9 @@ capacity-dmips-mhz = <1740>; dynamic-power-coefficient = <405>; next-level-cache = <&L2_700>; + operating-points-v2 = <&cpu6_opp_table>; + interconnects = <&gem_noc MASTER_APPSS_PROC &mc_virt SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; qcom,freq-domain = <&cpufreq_hw 1>; L2_700: l2-cache { @@ -366,6 +391,141 @@ }; }; + cpu0_opp_table: cpu0_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + cpu0_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <1200000 4800000>; + }; + + cpu0_opp2: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <1200000 4800000>; + }; + + cpu0_opp3: opp-768000000 { + opp-hz = /bits/ 64 <768000000>; + opp-peak-kBps = <1200000 4800000>; + }; + + cpu0_opp4: opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + opp-peak-kBps = <1804000 8908800>; + }; + + cpu0_opp5: opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + opp-peak-kBps = <2188000 12902400>; + }; + + cpu0_opp6: opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <2188000 12902400>; + }; + + cpu0_opp7: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <3072000 15052800>; + }; + + cpu0_opp8: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <3072000 15052800>; + }; + + cpu0_opp9: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <3072000 15052800>; + }; + + cpu0_opp10: opp-1804800000 { + opp-hz = /bits/ 64 <1804800000>; + opp-peak-kBps = <4068000 22425600>; + }; + }; + + cpu6_opp_table: cpu6_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + cpu6_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <2188000 8908800>; + }; + + cpu6_opp2: opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <2188000 8908800>; + }; + + cpu6_opp3: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <2188000 8908800>; + }; + + cpu6_opp4: opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <2188000 8908800>; + }; + + cpu6_opp5: opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + opp-peak-kBps = <2188000 8908800>; + }; + + cpu6_opp6: opp-1267200000 { + opp-hz = /bits/ 64 <1267200000>; + opp-peak-kBps = <4068000 12902400>; + }; + + cpu6_opp7: opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + opp-peak-kBps = <4068000 15052800>; + }; + + cpu6_opp8: opp-1708800000 { + opp-hz = /bits/ 64 <1708800000>; + opp-peak-kBps = <6220000 19353600>; + }; + + cpu6_opp9: opp-1843200000 { + opp-hz = /bits/ 64 <1843200000>; + opp-peak-kBps = <6220000 19353600>; + }; + + cpu6_opp10: opp-1900800000 { + opp-hz = /bits/ 64 <1900800000>; + opp-peak-kBps = <6220000 22425600>; + }; + + cpu6_opp11: opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-peak-kBps = <6220000 22425600>; + }; + + cpu6_opp12: opp-2112000000 { + opp-hz = /bits/ 64 <2112000000>; + opp-peak-kBps = <6220000 22425600>; + }; + + cpu6_opp13: opp-2208000000 { + opp-hz = /bits/ 64 <2208000000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu6_opp14: opp-2323200000 { + opp-hz = /bits/ 64 <2323200000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu6_opp15: opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-peak-kBps = <8532000 23347200>; + }; + }; + memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ @@ -498,9 +658,15 @@ #power-domain-cells = <1>; }; - qfprom@784000 { + qfprom: efuse@784000 { compatible = "qcom,qfprom"; - reg = <0 0x00784000 0 0x8ff>; + reg = <0 0x00784000 0 0x8ff>, + <0 0x00780000 0 0x7a0>, + <0 0x00782000 0 0x100>, + <0 0x00786000 0 0x1fff>; + + clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>; + clock-names = "core"; #address-cells = <1>; #size-cells = <1>; @@ -524,6 +690,8 @@ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; clock-names = "core", "iface"; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&sdhc1_opp_table>; bus-width = <8>; non-removable; @@ -535,6 +703,39 @@ mmc-hs400-enhanced-strobe; status = "disabled"; + + sdhc1_opp_table: sdhc1-opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + qup_opp_table: qup-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; }; qupv3_id_0: geniqup@8c0000 { @@ -547,6 +748,8 @@ #size-cells = <2>; ranges; iommus = <&apps_smmu 0x43 0x0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>; + interconnect-names = "qup-core"; status = "disabled"; i2c0: i2c@880000 { @@ -559,6 +762,11 @@ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, + <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -572,6 +780,11 @@ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -583,6 +796,11 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart0_default>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -596,6 +814,11 @@ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, + <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -609,6 +832,11 @@ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -620,6 +848,11 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart1_default>; interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -633,6 +866,11 @@ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, + <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -644,6 +882,11 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart2_default>; interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -657,6 +900,11 @@ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, + <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -670,6 +918,11 @@ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -681,6 +934,11 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart3_default>; interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -694,6 +952,11 @@ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, + <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -705,6 +968,11 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart4_default>; interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -718,6 +986,11 @@ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>, + <&aggre1_noc MASTER_QUP_0 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -731,6 +1004,11 @@ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -742,6 +1020,11 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart5_default>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_0 &qup_virt SLAVE_QUP_CORE_0>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; }; @@ -756,6 +1039,8 @@ #size-cells = <2>; ranges; iommus = <&apps_smmu 0x4c3 0x0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>; + interconnect-names = "qup-core"; status = "disabled"; i2c6: i2c@a80000 { @@ -768,6 +1053,11 @@ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, + <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -781,6 +1071,11 @@ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -792,6 +1087,11 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart6_default>; interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -805,6 +1105,11 @@ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, + <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -816,6 +1121,11 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart7_default>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -829,6 +1139,11 @@ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, + <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -842,6 +1157,11 @@ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -853,6 +1173,11 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart8_default>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -866,6 +1191,11 @@ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, + <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -877,6 +1207,11 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart9_default>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -890,6 +1225,11 @@ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, + <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -903,6 +1243,11 @@ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -914,6 +1259,11 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart10_default>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -927,6 +1277,11 @@ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>, + <&aggre2_noc MASTER_QUP_1 &mc_virt SLAVE_EBI1>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; status = "disabled"; }; @@ -940,6 +1295,11 @@ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; @@ -951,6 +1311,11 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart11_default>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&qup_virt MASTER_QUP_CORE_1 &qup_virt SLAVE_QUP_CORE_1>, + <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_QUP_1>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; }; @@ -1459,6 +1824,57 @@ }; }; + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sc7180-mpss-pas"; + reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <&gcc GCC_MSS_NAV_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bus", "nav", "snoc_axi", + "mnoc_axi", "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, + <&rpmhpd SC7180_CX>, + <&rpmhpd SC7180_MX>, + <&rpmhpd SC7180_MSS>; + power-domain-names = "load_state", "cx", "mx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + qcom,spare-regs = <&tcsr_regs 0xb3e4>; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apss_shared 12>; + }; + }; + gpu: gpu@5000000 { compatible = "qcom,adreno-618.0", "qcom,adreno"; #stream-id-cells = <16>; @@ -1470,42 +1886,52 @@ operating-points-v2 = <&gpu_opp_table>; qcom,gmu = <&gmu>; + interconnects = <&gem_noc MASTER_GFX3D &mc_virt SLAVE_EBI1>; + interconnect-names = "gfx-mem"; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + opp-peak-kBps = <8532000>; }; opp-650000000 { opp-hz = /bits/ 64 <650000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-peak-kBps = <7216000>; }; opp-565000000 { opp-hz = /bits/ 64 <565000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-peak-kBps = <5412000>; }; opp-430000000 { opp-hz = /bits/ 64 <430000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <5412000>; }; opp-355000000 { opp-hz = /bits/ 64 <355000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <3072000>; }; opp-267000000 { opp-hz = /bits/ 64 <267000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <3072000>; }; opp-180000000 { opp-hz = /bits/ 64 <180000000>; opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + opp-peak-kBps = <1804000>; }; }; }; @@ -1711,6 +2137,7 @@ etr@6048000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x06048000 0 0x1000>; + iommus = <&apps_smmu 0x04a0 0x20>; clocks = <&aoss_qmp>; clock-names = "apb_pclk"; @@ -1783,6 +2210,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + qcom,replicator-loses-context; out-ports { port { @@ -1810,6 +2238,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; out-ports { port { @@ -1829,6 +2258,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; out-ports { port { @@ -1848,6 +2278,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; out-ports { port { @@ -1867,6 +2298,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; out-ports { port { @@ -1886,6 +2318,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; out-ports { port { @@ -1905,6 +2338,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; out-ports { port { @@ -1924,6 +2358,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; out-ports { port { @@ -1943,6 +2378,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; arm,coresight-loses-context-with-cpu; + qcom,skip-power-up; out-ports { port { @@ -2054,57 +2490,6 @@ }; }; - remoteproc_mpss: remoteproc@4080000 { - compatible = "qcom,sc7180-mpss-pas"; - reg = <0 0x04080000 0 0x4040>, <0 0x04180000 0 0x48>; - reg-names = "qdsp6", "rmb"; - - interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, - <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", "handover", - "stop-ack", "shutdown-ack"; - - clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, - <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, - <&gcc GCC_MSS_NAV_AXI_CLK>, - <&gcc GCC_MSS_SNOC_AXI_CLK>, - <&gcc GCC_MSS_MFAB_AXIS_CLK>, - <&rpmhcc RPMH_CXO_CLK>; - clock-names = "iface", "bus", "nav", "snoc_axi", - "mnoc_axi", "xo"; - - power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, - <&rpmhpd SC7180_CX>, - <&rpmhpd SC7180_MX>, - <&rpmhpd SC7180_MSS>; - power-domain-names = "load_state", "cx", "mx", "mss"; - - memory-region = <&mpss_mem>; - - qcom,smem-states = <&modem_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - resets = <&aoss_reset AOSS_CC_MSS_RESTART>, - <&pdc_reset PDC_MODEM_SYNC_RESET>; - reset-names = "mss_restart", "pdc_reset"; - - qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; - qcom,spare-regs = <&tcsr_regs 0xb3e4>; - - status = "disabled"; - - glink-edge { - interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; - label = "modem"; - qcom,remote-pid = <1>; - mboxes = <&apss_shared 12>; - }; - }; - sdhc_2: sdhci@8804000 { compatible = "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; reg = <0 0x08804000 0 0x1000>; @@ -2117,10 +2502,45 @@ clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; clock-names = "core", "iface"; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&sdhc2_opp_table>; bus-width = <4>; status = "disabled"; + + sdhc2_opp_table: sdhc2-opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + qspi_opp_table: qspi-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; }; qspi: spi@88dc000 { @@ -2132,6 +2552,11 @@ clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, <&gcc GCC_QSPI_CORE_CLK>; clock-names = "iface", "core"; + interconnects = <&gem_noc MASTER_APPSS_PROC + &config_noc SLAVE_QSPI_0>; + interconnect-names = "qspi-config"; + power-domains = <&rpmhpd SC7180_CX>; + operating-points-v2 = <&qspi_opp_table>; status = "disabled"; }; @@ -2257,6 +2682,7 @@ snps,dis_enblslpm_quirk; phys = <&usb_1_hsphy>, <&usb_1_ssphy>; phy-names = "usb2-phy", "usb3-phy"; + maximum-speed = "super-speed"; }; }; @@ -2355,6 +2781,8 @@ <19200000>, <19200000>, <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SC7180_CX>; interrupt-parent = <&mdss>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; @@ -2372,6 +2800,31 @@ }; }; }; + + mdp_opp_table: mdp-opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-460000000 { + opp-hz = /bits/ 64 <460000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; dsi0: dsi@ae94000 { @@ -2395,6 +2848,9 @@ "iface", "bus"; + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC7180_CX>; + phys = <&dsi_phy>; phy-names = "dsi"; @@ -2420,6 +2876,25 @@ }; }; }; + + dsi_opp_table: dsi-opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; }; dsi_phy: dsi-phy@ae94400 { @@ -2814,6 +3289,29 @@ #freq-domain-cells = <1>; }; + + wifi: wifi@18800000 { + compatible = "qcom,wcn3990-wifi"; + reg = <0 0x18800000 0 0x800000>; + reg-names = "membase"; + iommus = <&apps_smmu 0xc0 0x1>; + interrupts = + <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >, + <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >, + <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>; + memory-region = <&wlan_mem>; + qcom,msa-fixed-perm; + status = "disabled"; + }; }; thermal-zones { diff --git a/dts/src/arm64/qcom/sdm630-sony-xperia-ganges-kirin.dts b/dts/src/arm64/qcom/sdm630-sony-xperia-ganges-kirin.dts new file mode 100644 index 0000000000..46a7f2b26e --- /dev/null +++ b/dts/src/arm64/qcom/sdm630-sony-xperia-ganges-kirin.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Martin Botka + */ + +/dts-v1/; + +#include "sdm630-sony-xperia-ganges.dtsi" + +/ { + model = "Sony Xperia 10"; + compatible = "sony,kirin-row", "qcom,sdm630"; +}; diff --git a/dts/src/arm64/qcom/sdm630-sony-xperia-ganges.dtsi b/dts/src/arm64/qcom/sdm630-sony-xperia-ganges.dtsi new file mode 100644 index 0000000000..cf2e8b5d60 --- /dev/null +++ b/dts/src/arm64/qcom/sdm630-sony-xperia-ganges.dtsi @@ -0,0 +1,40 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Martin Botka + */ + +/dts-v1/; + +/* Ganges is very similar to Nile, but + * there are some differences that will need + * to be addresed when more peripherals are + * enabled upstream. Hence the separate DTSI. + */ +#include "sdm630-sony-xperia-nile.dtsi" + +/ { + chosen { + framebuffer@9d400000 { + reg = <0 0x9d400000 0 (2520 * 1080 * 4)>; + height = <2520>; + }; + }; + + /* Yes, this is intentional. + * Ganges devices only use gpio-keys for + * Volume Down, but currently there's an + * issue with it that has to be resolved. + * Until then, let's not make the kernel panic + */ + /delete-node/ gpio-keys; + + soc { + + i2c@c175000 { + status = "okay"; + + /* Novatek touchscreen */ + }; + }; + +}; diff --git a/dts/src/arm64/qcom/sdm630-sony-xperia-nile-discovery.dts b/dts/src/arm64/qcom/sdm630-sony-xperia-nile-discovery.dts new file mode 100644 index 0000000000..8fca0b69fa --- /dev/null +++ b/dts/src/arm64/qcom/sdm630-sony-xperia-nile-discovery.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm630-sony-xperia-nile.dtsi" + +/ { + model = "Sony Xperia XA2 Ultra"; + compatible = "sony,discovery-row", "qcom,sdm630"; +}; diff --git a/dts/src/arm64/qcom/sdm630-sony-xperia-nile-pioneer.dts b/dts/src/arm64/qcom/sdm630-sony-xperia-nile-pioneer.dts new file mode 100644 index 0000000000..90dcd4ebaa --- /dev/null +++ b/dts/src/arm64/qcom/sdm630-sony-xperia-nile-pioneer.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm630-sony-xperia-nile.dtsi" + +/ { + model = "Sony Xperia XA2"; + compatible = "sony,pioneer-row", "qcom,sdm630"; +}; diff --git a/dts/src/arm64/qcom/sdm630-sony-xperia-nile-voyager.dts b/dts/src/arm64/qcom/sdm630-sony-xperia-nile-voyager.dts new file mode 100644 index 0000000000..fae5f1bb68 --- /dev/null +++ b/dts/src/arm64/qcom/sdm630-sony-xperia-nile-voyager.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm630-sony-xperia-nile.dtsi" + +/ { + model = "Sony Xperia XA2 Plus"; + compatible = "sony,voyager-row", "qcom,sdm630"; + + chosen { + framebuffer@9d400000 { + reg = <0 0x9d400000 0 (2160 * 1080 * 4)>; + height = <2160>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi b/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi new file mode 100644 index 0000000000..9ba359c848 --- /dev/null +++ b/dts/src/arm64/qcom/sdm630-sony-xperia-nile.dtsi @@ -0,0 +1,136 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +/dts-v1/; + +#include "sdm630.dtsi" +#include "pm660.dtsi" +#include "pm660l.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/gpio-keys.h> + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <318 0>; + qcom,board-id = <8 1>; + qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00>; + + /* This part enables graphical output via bootloader-enabled display */ + chosen { + bootargs = "earlycon=tty0 console=tty0"; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + stdout-path = "framebuffer0"; + + framebuffer0: framebuffer@9d400000 { + compatible = "simple-framebuffer"; + reg = <0 0x9d400000 0 (1920 * 1080 * 4)>; + width = <1080>; + height = <1920>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + status= "okay"; + }; + }; + + gpio_keys { + status = "okay"; + compatible = "gpio-keys"; + input-name = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + camera_focus { + label = "Camera Focus"; + gpios = <&tlmm 64 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + debounce-interval = <15>; + }; + + camera_snapshot { + label = "Camera Snapshot"; + gpios = <&tlmm 113 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + }; + + vol_down { + label = "Volume Down"; + gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + gpio-key,wakeup; + debounce-interval = <15>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + status = "okay"; + }; + + debug_region@ffb00000 { + reg = <0x00 0xffb00000 0x00 0x100000>; + no-map; + }; + + removed_region@85800000 { + reg = <0x00 0x85800000 0x00 0x3700000>; + no-map; + }; + }; + + soc { + sdhci@c0c4000 { + status = "okay"; + + mmc-ddr-1_8v; + /* SoMC Nile platform's eMMC doesn't support HS200 mode */ + mmc-hs400-1_8v; + }; + + i2c@c175000 { + status = "okay"; + + /* Synaptics touchscreen */ + }; + + i2c@c176000 { + status = "okay"; + + /* SMB1351 charger */ + }; + + serial@c1af000 { + status = "okay"; + }; + + /* I2C3, 4, 5, 7 and 8 are disabled on this board. */ + + i2c@c1b6000 { + status = "okay"; + + /* NXP NFC */ + }; + }; +}; diff --git a/dts/src/arm64/qcom/sdm630.dtsi b/dts/src/arm64/qcom/sdm630.dtsi new file mode 100644 index 0000000000..88efe8200c --- /dev/null +++ b/dts/src/arm64/qcom/sdm630.dtsi @@ -0,0 +1,1174 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Konrad Dybcio + */ + +#include <dt-bindings/clock/qcom,gcc-sdm660.h> +#include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32764>; + clock-output-names = "sleep_clk"; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x100>; + enable-method = "psci"; + cpu-idle-states = <&PERF_CPU_SLEEP_0 + &PERF_CPU_SLEEP_1 + &PERF_CLUSTER_SLEEP_0 + &PERF_CLUSTER_SLEEP_1 + &PERF_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1126>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x101>; + enable-method = "psci"; + cpu-idle-states = <&PERF_CPU_SLEEP_0 + &PERF_CPU_SLEEP_1 + &PERF_CLUSTER_SLEEP_0 + &PERF_CLUSTER_SLEEP_1 + &PERF_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1126>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + }; + + CPU2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x102>; + enable-method = "psci"; + cpu-idle-states = <&PERF_CPU_SLEEP_0 + &PERF_CPU_SLEEP_1 + &PERF_CLUSTER_SLEEP_0 + &PERF_CLUSTER_SLEEP_1 + &PERF_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1126>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + }; + + CPU3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x103>; + enable-method = "psci"; + cpu-idle-states = <&PERF_CPU_SLEEP_0 + &PERF_CPU_SLEEP_1 + &PERF_CLUSTER_SLEEP_0 + &PERF_CLUSTER_SLEEP_1 + &PERF_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1126>; + #cooling-cells = <2>; + next-level-cache = <&L2_1>; + }; + + CPU4: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "psci"; + cpu-idle-states = <&PWR_CPU_SLEEP_0 + &PWR_CPU_SLEEP_1 + &PWR_CLUSTER_SLEEP_0 + &PWR_CLUSTER_SLEEP_1 + &PWR_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + cpu-idle-states = <&PWR_CPU_SLEEP_0 + &PWR_CPU_SLEEP_1 + &PWR_CLUSTER_SLEEP_0 + &PWR_CLUSTER_SLEEP_1 + &PWR_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + }; + + CPU6: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + enable-method = "psci"; + cpu-idle-states = <&PWR_CPU_SLEEP_0 + &PWR_CPU_SLEEP_1 + &PWR_CLUSTER_SLEEP_0 + &PWR_CLUSTER_SLEEP_1 + &PWR_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + }; + + CPU7: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + enable-method = "psci"; + cpu-idle-states = <&PWR_CPU_SLEEP_0 + &PWR_CPU_SLEEP_1 + &PWR_CLUSTER_SLEEP_0 + &PWR_CLUSTER_SLEEP_1 + &PWR_CLUSTER_SLEEP_2>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + + idle-states { + entry-method = "psci"; + + PWR_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-retention"; + arm,psci-suspend-param = <0x40000002>; + entry-latency-us = <338>; + exit-latency-us = <423>; + min-residency-us = <200>; + }; + + PWR_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <515>; + exit-latency-us = <1821>; + min-residency-us = <1000>; + local-timer-stop; + }; + + PERF_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "perf-retention"; + arm,psci-suspend-param = <0x40000002>; + entry-latency-us = <154>; + exit-latency-us = <87>; + min-residency-us = <200>; + }; + + PERF_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "perf-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <262>; + exit-latency-us = <301>; + min-residency-us = <1000>; + local-timer-stop; + }; + + PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-cluster-dynamic-retention"; + arm,psci-suspend-param = <0x400000F2>; + entry-latency-us = <284>; + exit-latency-us = <384>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-cluster-retention"; + arm,psci-suspend-param = <0x400000F3>; + entry-latency-us = <338>; + exit-latency-us = <423>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 { + compatible = "arm,idle-state"; + idle-state-name = "pwr-cluster-retention"; + arm,psci-suspend-param = <0x400000F4>; + entry-latency-us = <515>; + exit-latency-us = <1821>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "perf-cluster-dynamic-retention"; + arm,psci-suspend-param = <0x400000F2>; + entry-latency-us = <272>; + exit-latency-us = <329>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "perf-cluster-retention"; + arm,psci-suspend-param = <0x400000F3>; + entry-latency-us = <332>; + exit-latency-us = <368>; + min-residency-us = <9987>; + local-timer-stop; + }; + + PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 { + compatible = "arm,idle-state"; + idle-state-name = "perf-cluster-retention"; + arm,psci-suspend-param = <0x400000F4>; + entry-latency-us = <545>; + exit-latency-us = <1609>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8998", "qcom,scm"; + }; + }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + wlan_msa_guard: wlan-msa-guard@85600000 { + reg = <0x0 0x85600000 0x0 0x100000>; + no-map; + }; + + wlan_msa_mem: wlan-msa-mem@85700000 { + reg = <0x0 0x85700000 0x0 0x100000>; + no-map; + }; + + qhee_code: qhee-code@85800000 { + reg = <0x0 0x85800000 0x0 0x3700000>; + no-map; + }; + + smem_region: smem-mem@86000000 { + reg = <0 0x86000000 0 0x200000>; + no-map; + }; + + tz_mem: memory@86200000 { + reg = <0x0 0x86200000 0x0 0x3300000>; + no-map; + }; + + modem_fw_mem: modem-fw-region@8ac00000 { + reg = <0x0 0x8ac00000 0x0 0x7e00000>; + no-map; + }; + + adsp_fw_mem: adsp-fw-region@92a00000 { + reg = <0x0 0x92a00000 0x0 0x1e00000>; + no-map; + }; + + pil_mba_mem: pil-mba-region@94800000 { + reg = <0x0 0x94800000 0x0 0x200000>; + no-map; + }; + + buffer_mem: buffer-region@94a00000 { + reg = <0x0 0x94a00000 0x0 0x100000>; + no-map; + }; + + venus_fw_mem: venus-fw-region@9f800000 { + reg = <0x0 0x9f800000 0x0 0x800000>; + no-map; + }; + + secure_region2: secure-region2@f7c00000 { + reg = <0x0 0xf7c00000 0x0 0x5c00000>; + no-map; + }; + + adsp_mem: adsp-region@f6000000 { + reg = <0x0 0xf6000000 0x0 0x800000>; + no-map; + }; + + qseecom_ta_mem: qseecom-ta-region@fec00000 { + reg = <0x0 0xfec00000 0x0 0x1000000>; + no-map; + }; + + qseecom_mem: qseecom-region@f6800000 { + reg = <0x0 0xf6800000 0x0 0x1400000>; + no-map; + }; + + secure_display_memory: secure-region@f5c00000 { + reg = <0x0 0xf5c00000 0x0 0x5c00000>; + no-map; + }; + + cont_splash_mem: cont-splash-region@9d400000 { + reg = <0x0 0x9d400000 0x0 0x23ff000>; + no-map; + }; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-sdm660"; + qcom,glink-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; + }; + + smem: smem { + compatible = "qcom,smem"; + memory-region = <&smem_region>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sdm630"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0x00100000 0x94000>; + + clock-names = "xo", "sleep_clk"; + clocks = <&xo_board>, + <&sleep_clk>; + }; + + rpm_msg_ram: memory@778000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00778000 0x7000>; + }; + + qfprom: qfprom@780000 { + compatible = "qcom,qfprom"; + reg = <0x00780000 0x621c>; + #address-cells = <1>; + #size-cells = <1>; + }; + + rng: rng@793000 { + compatible = "qcom,prng-ee"; + reg = <0x00793000 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + restart@10ac000 { + compatible = "qcom,pshold"; + reg = <0x010ac000 0x4>; + }; + + anoc2_smmu: iommu@16c0000 { + compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; + reg = <0x016c0000 0x40000>; + #iommu-cells = <1>; + + #global-interrupts = <2>; + interrupts = + <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + + <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 376 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 377 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 378 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>; + }; + + tcsr_mutex_regs: syscon@1f40000 { + compatible = "syscon"; + reg = <0x01f40000 0x20000>; + }; + + tlmm: pinctrl@3000000 { + compatible = "qcom,sdm630-pinctrl"; + reg = <0x03000000 0xc00000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x2>; + + blsp1_uart1_default: blsp1-uart1-default { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart1_sleep: blsp1-uart1-sleep { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + + blsp1_uart2_default: blsp1-uart2-default { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart1_tx_active: blsp2-uart1-tx-active { + pins = "gpio16"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart1_tx_sleep: blsp2-uart1-tx-sleep { + pins = "gpio16"; + drive-strength = <2>; + bias-pull-up; + }; + + blsp2_uart1_rxcts_active: blsp2-uart1-rxcts-active { + pins = "gpio17", "gpio18"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart1_rxcts_sleep: blsp2-uart1-rxcts-sleep { + pins = "gpio17", "gpio18"; + drive-strength = <2>; + bias-no-pull; + }; + + blsp2_uart1_rfr_active: blsp2-uart1-rfr-active { + pins = "gpio19"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_uart1_rfr_sleep: blsp2-uart1-rfr-sleep { + pins = "gpio19"; + drive-strength = <2>; + bias-no-pull; + }; + + i2c1_default: i2c1-default { + pins = "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; + + i2c1_sleep: i2c1-sleep { + pins = "gpio2", "gpio3"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c2_default: i2c2-default { + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable; + }; + + i2c2_sleep: i2c2-sleep { + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c3_default: i2c3-default { + pins = "gpio10", "gpio11"; + drive-strength = <2>; + bias-disable; + }; + + i2c3_sleep: i2c3-sleep { + pins = "gpio10", "gpio11"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c4_default: i2c4-default { + pins = "gpio14", "gpio15"; + drive-strength = <2>; + bias-disable; + }; + + i2c4_sleep: i2c4-sleep { + pins = "gpio14", "gpio15"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c5_default: i2c5-default { + pins = "gpio18", "gpio19"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_sleep: i2c5-sleep { + pins = "gpio18", "gpio19"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c6_default: i2c6-default { + pins = "gpio22", "gpio23"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_sleep: i2c6-sleep { + pins = "gpio22", "gpio23"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c7_default: i2c7-default { + pins = "gpio26", "gpio27"; + drive-strength = <2>; + bias-disable; + }; + + i2c7_sleep: i2c7-sleep { + pins = "gpio26", "gpio27"; + drive-strength = <2>; + bias-pull-up; + }; + + i2c8_default: i2c8-default { + pins = "gpio30", "gpio31"; + drive-strength = <2>; + bias-disable; + }; + + i2c8_sleep: i2c8-sleep { + pins = "gpio30", "gpio31"; + drive-strength = <2>; + bias-pull-up; + }; + + sdc1_clk_on: sdc1-clk-on { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + sdc1_clk_off: sdc1-clk-off { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_cmd_on: sdc1-cmd-on { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + sdc1_cmd_off: sdc1-cmd-off { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_data_on: sdc1-data-on { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <8>; + }; + + sdc1_data_off: sdc1-data-off { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_rclk_on: sdc1-rclk-on { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc1_rclk_off: sdc1-rclk-off { + pins = "sdc1_rclk"; + bias-pull-down; + }; + }; + + kgsl_smmu: iommu@5040000 { + compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; + reg = <0x05040000 0x10000>; + #iommu-cells = <1>; + + #global-interrupts = <2>; + interrupts = + <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + + <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>; + }; + + lpass_smmu: iommu@5100000 { + compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; + reg = <0x05100000 0x40000>; + #iommu-cells = <1>; + + #global-interrupts = <2>; + interrupts = + <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; + }; + + spmi_bus: spmi@800f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0800f000 0x1000>, + <0x08400000 0x1000000>, + <0x09400000 0x1000000>, + <0x0a400000 0x220000>, + <0x0800a000 0x3000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + + sdhc_1: sdhci@c0c4000 { + compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5"; + reg = <0x0c0c4000 0x1000>, + <0x0c0c5000 0x1000>; + reg-names = "hc", "cqhci"; + + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; + + bus-width = <8>; + non-removable; + + status = "disabled"; + }; + + blsp1_dma: dma@c144000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c144000 0x1f000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + + blsp1_uart1: serial@c16f000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c16f000 0x200>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 0>, <&blsp1_dma 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; + status = "disabled"; + }; + + blsp1_uart2: serial@c170000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c170000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_default>; + status = "disabled"; + }; + + blsp_i2c1: i2c@c175000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c175000 0x600>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_default>; + pinctrl-1 = <&i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c2: i2c@c176000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c176000 0x600>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c3: i2c@c177000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c177000 0x600>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_default>; + pinctrl-1 = <&i2c3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c4: i2c@c178000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c178000 0x600>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_default>; + pinctrl-1 = <&i2c4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp2_dma: dma@c184000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0c184000 0x1f000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + num-channels = <18>; + qcom,num-ees = <4>; + }; + + blsp2_uart1: serial@c1af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x0c1af000 0x200>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp2_dma 0>, <&blsp2_dma 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart1_tx_active &blsp2_uart1_rxcts_active + &blsp2_uart1_rfr_active>; + pinctrl-1 = <&blsp2_uart1_tx_sleep &blsp2_uart1_rxcts_sleep + &blsp2_uart1_rfr_sleep>; + status = "disabled"; + }; + + blsp_i2c5: i2c@c1b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b5000 0x600>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c6: i2c@c1b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b6000 0x600>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c7: i2c@c1b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b7000 0x600>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c7_default>; + pinctrl-1 = <&i2c7_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c8: i2c@c1b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x0c1b8000 0x600>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + clock-frequency = <400000>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c8_default>; + pinctrl-1 = <&i2c8_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mmss_smmu: iommu@cd00000 { + compatible = "qcom,sdm630-smmu-v2", "qcom,smmu-v2"; + reg = <0x0cd00000 0x40000>; + #iommu-cells = <1>; + + #global-interrupts = <2>; + interrupts = + <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>; + }; + + apcs_glb: mailbox@17911000 { + compatible = "qcom,sdm660-apcs-hmss-global"; + reg = <0x17911000 0x1000>; + + #mbox-cells = <1>; + }; + + timer@17920000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0x17920000 0x1000>; + clock-frequency = <19200000>; + + frame@17921000 { + frame-number = <0>; + interrupts = <0 8 0x4>, + <0 7 0x4>; + reg = <0x17921000 0x1000>, + <0x17922000 0x1000>; + }; + + frame@17923000 { + frame-number = <1>; + interrupts = <0 9 0x4>; + reg = <0x17923000 0x1000>; + status = "disabled"; + }; + + frame@17924000 { + frame-number = <2>; + interrupts = <0 10 0x4>; + reg = <0x17924000 0x1000>; + status = "disabled"; + }; + + frame@17925000 { + frame-number = <3>; + interrupts = <0 11 0x4>; + reg = <0x17925000 0x1000>; + status = "disabled"; + }; + + frame@17926000 { + frame-number = <4>; + interrupts = <0 12 0x4>; + reg = <0x17926000 0x1000>; + status = "disabled"; + }; + + frame@17927000 { + frame-number = <5>; + interrupts = <0 13 0x4>; + reg = <0x17927000 0x1000>; + status = "disabled"; + }; + + frame@17928000 { + frame-number = <6>; + interrupts = <0 14 0x4>; + reg = <0x17928000 0x1000>; + status = "disabled"; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + reg = <0x17a00000 0x10000>, /* GICD */ + <0x17b00000 0x100000>; /* GICR * 8 */ + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x20000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 1 0xf08>, + <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 0 0xf08>; + }; +}; + diff --git a/dts/src/arm64/qcom/sdm636-sony-xperia-ganges-mermaid.dts b/dts/src/arm64/qcom/sdm636-sony-xperia-ganges-mermaid.dts new file mode 100644 index 0000000000..7c0830e6a4 --- /dev/null +++ b/dts/src/arm64/qcom/sdm636-sony-xperia-ganges-mermaid.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Martin Botka + */ + +/dts-v1/; + +/* Mermaid uses sdm636, but it's different ever so slightly + * that we can ignore it for the time being. Sony also commonizes + * the Ganges platform as a whole in downstream kernels. + */ +#include "sdm630-sony-xperia-ganges.dtsi" + +/ { + model = "Sony Xperia 10 Plus"; + compatible = "sony,mermaid-row", "qcom,sdm636"; + + qcom,msm-id = <345 0>; + qcom,pmic-id = <0x1001b 0x101011a 0x00 0x00 0x1001b 0x201011a 0x00 0x00 0x1001b 0x102001a 0x00 0x00>; +}; diff --git a/dts/src/arm64/qcom/sdm845-cheza.dtsi b/dts/src/arm64/qcom/sdm845-cheza.dtsi index 70466cc4b4..64fc1bfd66 100644 --- a/dts/src/arm64/qcom/sdm845-cheza.dtsi +++ b/dts/src/arm64/qcom/sdm845-cheza.dtsi @@ -634,7 +634,7 @@ ap_ts_i2c: &i2c14 { }; &mss_pil { - iommus = <&apps_smmu 0x780 0x1>, + iommus = <&apps_smmu 0x781 0x0>, <&apps_smmu 0x724 0x3>; }; diff --git a/dts/src/arm64/qcom/sdm845-db845c.dts b/dts/src/arm64/qcom/sdm845-db845c.dts index c00797bd3b..a2a98680cc 100644 --- a/dts/src/arm64/qcom/sdm845-db845c.dts +++ b/dts/src/arm64/qcom/sdm845-db845c.dts @@ -74,6 +74,17 @@ }; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <<9611_out>; + }; + }; + }; + lt9611_1v8: lt9611-vdd18-regulator { compatible = "regulator-fixed"; regulator-name = "LT9611_1V8"; @@ -382,6 +393,25 @@ firmware-name = "qcom/sdm845/cdsp.mdt"; }; +&dsi0 { + status = "okay"; + vdda-supply = <&vreg_l26a_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <<9611_a>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vreg_l1a_0p875>; +}; + &gcc { protected-clocks = <GCC_QSPI_CORE_CLK>, <GCC_QSPI_CORE_CLK_SRC>, @@ -395,6 +425,48 @@ }; }; +&i2c10 { + status = "okay"; + clock-frequency = <400000>; + + lt9611_codec: hdmi-bridge@3b { + compatible = "lontium,lt9611"; + reg = <0x3b>; + #sound-dai-cells = <1>; + + interrupts-extended = <&tlmm 84 IRQ_TYPE_EDGE_FALLING>; + + reset-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>; + + vdd-supply = <<9611_1v8>; + vcc-supply = <<9611_3v3>; + + pinctrl-names = "default"; + pinctrl-0 = <<9611_irq_pin>, <&dsi_sw_sel>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + lt9611_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + + port@1 { + reg = <1>; + + lt9611_a: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +}; + &i2c11 { /* On Low speed expansion */ label = "LS-I2C1"; @@ -407,6 +479,14 @@ status = "okay"; }; +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + &mss_pil { status = "okay"; firmware-name = "qcom/sdm845/mba.mbn", "qcom/sdm845/modem.mbn"; @@ -612,6 +692,21 @@ }; }; + hdmi-dai-link { + link-name = "HDMI Playback"; + cpu { + sound-dai = <&q6afedai QUATERNARY_MI2S_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <<9611_codec 0>; + }; + }; + slim-dai-link { link-name = "SLIM Playback"; cpu { @@ -686,6 +781,21 @@ }; }; + dsi_sw_sel: dsi-sw-sel { + pins = "gpio120"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + output-high; + }; + + lt9611_irq_pin: lt9611-irq { + pins = "gpio84"; + function = "gpio"; + bias-disable; + }; + pcie0_default_state: pcie0-default { clkreq { pins = "gpio36"; @@ -943,6 +1053,14 @@ }; }; +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + &qup_uart6_default { pinmux { pins = "gpio45", "gpio46", "gpio47", "gpio48"; diff --git a/dts/src/arm64/qcom/sdm845.dtsi b/dts/src/arm64/qcom/sdm845.dtsi index 8eb5a31346..2884577dcb 100644 --- a/dts/src/arm64/qcom/sdm845.dtsi +++ b/dts/src/arm64/qcom/sdm845.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/clock/qcom,lpass-sdm845.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,videocc-sdm845.h> +#include <dt-bindings/interconnect/qcom,osm-l3.h> #include <dt-bindings/interconnect/qcom,sdm845.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/phy/phy-qcom-qusb2.h> @@ -198,6 +199,9 @@ capacity-dmips-mhz = <607>; dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_0>; L2_0: l2-cache { @@ -220,6 +224,9 @@ capacity-dmips-mhz = <607>; dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_100>; L2_100: l2-cache { @@ -239,6 +246,9 @@ capacity-dmips-mhz = <607>; dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_200>; L2_200: l2-cache { @@ -258,6 +268,9 @@ capacity-dmips-mhz = <607>; dynamic-power-coefficient = <100>; qcom,freq-domain = <&cpufreq_hw 0>; + operating-points-v2 = <&cpu0_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_300>; L2_300: l2-cache { @@ -277,6 +290,9 @@ &CLUSTER_SLEEP_0>; dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_400>; L2_400: l2-cache { @@ -296,6 +312,9 @@ &CLUSTER_SLEEP_0>; dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_500>; L2_500: l2-cache { @@ -315,6 +334,9 @@ &CLUSTER_SLEEP_0>; dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_600>; L2_600: l2-cache { @@ -334,6 +356,9 @@ &CLUSTER_SLEEP_0>; dynamic-power-coefficient = <396>; qcom,freq-domain = <&cpufreq_hw 1>; + operating-points-v2 = <&cpu4_opp_table>; + interconnects = <&gladiator_noc MASTER_APPSS_PROC &mem_noc SLAVE_EBI1>, + <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; #cooling-cells = <2>; next-level-cache = <&L2_700>; L2_700: l2-cache { @@ -433,6 +458,266 @@ }; }; + cpu0_opp_table: cpu0_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + cpu0_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 4800000>; + }; + + cpu0_opp2: opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <800000 4800000>; + }; + + cpu0_opp3: opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-peak-kBps = <800000 6451200>; + }; + + cpu0_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <800000 6451200>; + }; + + cpu0_opp5: opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <800000 7680000>; + }; + + cpu0_opp6: opp-748800000 { + opp-hz = /bits/ 64 <748800000>; + opp-peak-kBps = <1804000 9216000>; + }; + + cpu0_opp7: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <1804000 9216000>; + }; + + cpu0_opp8: opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-peak-kBps = <1804000 10444800>; + }; + + cpu0_opp9: opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <1804000 11980800>; + }; + + cpu0_opp10: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <1804000 11980800>; + }; + + cpu0_opp11: opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + opp-peak-kBps = <2188000 13516800>; + }; + + cpu0_opp12: opp-1228800000 { + opp-hz = /bits/ 64 <1228800000>; + opp-peak-kBps = <2188000 15052800>; + }; + + cpu0_opp13: opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + opp-peak-kBps = <2188000 16588800>; + }; + + cpu0_opp14: opp-1420800000 { + opp-hz = /bits/ 64 <1420800000>; + opp-peak-kBps = <3072000 18124800>; + }; + + cpu0_opp15: opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + opp-peak-kBps = <3072000 19353600>; + }; + + cpu0_opp16: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <4068000 19353600>; + }; + + cpu0_opp17: opp-1689600000 { + opp-hz = /bits/ 64 <1689600000>; + opp-peak-kBps = <4068000 20889600>; + }; + + cpu0_opp18: opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <4068000 22425600>; + }; + }; + + cpu4_opp_table: cpu4_opp_table { + compatible = "operating-points-v2"; + opp-shared; + + cpu4_opp1: opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-peak-kBps = <800000 4800000>; + }; + + cpu4_opp2: opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + opp-peak-kBps = <800000 4800000>; + }; + + cpu4_opp3: opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-peak-kBps = <1804000 4800000>; + }; + + cpu4_opp4: opp-576000000 { + opp-hz = /bits/ 64 <576000000>; + opp-peak-kBps = <1804000 4800000>; + }; + + cpu4_opp5: opp-652800000 { + opp-hz = /bits/ 64 <652800000>; + opp-peak-kBps = <1804000 4800000>; + }; + + cpu4_opp6: opp-748800000 { + opp-hz = /bits/ 64 <748800000>; + opp-peak-kBps = <1804000 4800000>; + }; + + cpu4_opp7: opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + opp-peak-kBps = <2188000 9216000>; + }; + + cpu4_opp8: opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + opp-peak-kBps = <2188000 9216000>; + }; + + cpu4_opp9: opp-979200000 { + opp-hz = /bits/ 64 <979200000>; + opp-peak-kBps = <2188000 9216000>; + }; + + cpu4_opp10: opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + opp-peak-kBps = <3072000 9216000>; + }; + + cpu4_opp11: opp-1132800000 { + opp-hz = /bits/ 64 <1132800000>; + opp-peak-kBps = <3072000 11980800>; + }; + + cpu4_opp12: opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + opp-peak-kBps = <4068000 11980800>; + }; + + cpu4_opp13: opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + opp-peak-kBps = <4068000 11980800>; + }; + + cpu4_opp14: opp-1363200000 { + opp-hz = /bits/ 64 <1363200000>; + opp-peak-kBps = <4068000 15052800>; + }; + + cpu4_opp15: opp-1459200000 { + opp-hz = /bits/ 64 <1459200000>; + opp-peak-kBps = <4068000 15052800>; + }; + + cpu4_opp16: opp-1536000000 { + opp-hz = /bits/ 64 <1536000000>; + opp-peak-kBps = <5412000 15052800>; + }; + + cpu4_opp17: opp-1612800000 { + opp-hz = /bits/ 64 <1612800000>; + opp-peak-kBps = <5412000 15052800>; + }; + + cpu4_opp18: opp-1689600000 { + opp-hz = /bits/ 64 <1689600000>; + opp-peak-kBps = <5412000 19353600>; + }; + + cpu4_opp19: opp-1766400000 { + opp-hz = /bits/ 64 <1766400000>; + opp-peak-kBps = <6220000 19353600>; + }; + + cpu4_opp20: opp-1843200000 { + opp-hz = /bits/ 64 <1843200000>; + opp-peak-kBps = <6220000 19353600>; + }; + + cpu4_opp21: opp-1920000000 { + opp-hz = /bits/ 64 <1920000000>; + opp-peak-kBps = <7216000 19353600>; + }; + + cpu4_opp22: opp-1996800000 { + opp-hz = /bits/ 64 <1996800000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp23: opp-2092800000 { + opp-hz = /bits/ 64 <2092800000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp24: opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp25: opp-2246400000 { + opp-hz = /bits/ 64 <2246400000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp26: opp-2323200000 { + opp-hz = /bits/ 64 <2323200000>; + opp-peak-kBps = <7216000 20889600>; + }; + + cpu4_opp27: opp-2400000000 { + opp-hz = /bits/ 64 <2400000000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu4_opp28: opp-2476800000 { + opp-hz = /bits/ 64 <2476800000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu4_opp29: opp-2553600000 { + opp-hz = /bits/ 64 <2553600000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu4_opp30: opp-2649600000 { + opp-hz = /bits/ 64 <2649600000>; + opp-peak-kBps = <7216000 22425600>; + }; + + cpu4_opp31: opp-2745600000 { + opp-hz = /bits/ 64 <2745600000>; + opp-peak-kBps = <7216000 25497600>; + }; + + cpu4_opp32: opp-2803200000 { + opp-hz = /bits/ 64 <2803200000>; + opp-peak-kBps = <7216000 25497600>; + }; + }; + pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; @@ -805,6 +1090,25 @@ clock-names = "core"; }; + qup_opp_table: qup-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + }; + qupv3_id_0: geniqup@8c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x008c0000 0 0x6000>; @@ -826,6 +1130,8 @@ interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -850,6 +1156,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart0_default>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -863,6 +1171,8 @@ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -887,6 +1197,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart1_default>; interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -900,6 +1212,8 @@ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -924,6 +1238,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart2_default>; interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -937,6 +1253,8 @@ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -961,6 +1279,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart3_default>; interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -974,6 +1294,8 @@ interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -998,6 +1320,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart4_default>; interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1011,6 +1335,8 @@ interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1035,6 +1361,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart5_default>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1048,6 +1376,8 @@ interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1072,6 +1402,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart6_default>; interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1085,6 +1417,8 @@ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1109,6 +1443,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart7_default>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; }; @@ -1134,6 +1470,8 @@ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1158,6 +1496,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart8_default>; interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1171,6 +1511,8 @@ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1195,6 +1537,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart9_default>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1208,6 +1552,8 @@ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1232,6 +1578,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart10_default>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1245,6 +1593,8 @@ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1269,6 +1619,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart11_default>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1282,6 +1634,8 @@ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1306,6 +1660,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart12_default>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1319,6 +1675,8 @@ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1343,6 +1701,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart13_default>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1356,6 +1716,8 @@ interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1380,6 +1742,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart14_default>; interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1393,6 +1757,8 @@ interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; @@ -1417,6 +1783,8 @@ pinctrl-names = "default"; pinctrl-0 = <&qup_uart15_default>; interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qup_opp_table>; status = "disabled"; }; }; @@ -1692,7 +2060,9 @@ ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sdm845-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; - reg = <0 0x01d84000 0 0x2500>; + reg = <0 0x01d84000 0 0x2500>, + <0 0x01d90000 0 0x8000>; + reg-names = "std", "ice"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; phys = <&ufs_mem_phy_lanes>; phy-names = "ufsphy"; @@ -1712,7 +2082,8 @@ "ref_clk", "tx_lane0_sync_clk", "rx_lane0_sync_clk", - "rx_lane1_sync_clk"; + "rx_lane1_sync_clk", + "ice_core_clk"; clocks = <&gcc GCC_UFS_PHY_AXI_CLK>, <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>, @@ -1721,7 +2092,8 @@ <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>, <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>, - <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>; + <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>, + <&gcc GCC_UFS_PHY_ICE_CORE_CLK>; freq-table-hz = <50000000 200000000>, <0 0>, @@ -1730,7 +2102,8 @@ <0 0>, <0 0>, <0 0>, - <0 0>; + <0 0>, + <0 300000000>; status = "disabled"; }; @@ -2643,6 +3016,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; out-ports { port { @@ -2662,6 +3036,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; out-ports { port { @@ -2681,6 +3056,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; out-ports { port { @@ -2700,6 +3076,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; out-ports { port { @@ -2719,6 +3096,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; out-ports { port { @@ -2738,6 +3116,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; out-ports { port { @@ -2757,6 +3136,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; out-ports { port { @@ -2776,6 +3156,7 @@ clocks = <&aoss_qmp>; clock-names = "apb_pclk"; + arm,coresight-loses-context-with-cpu; out-ports { port { @@ -2911,8 +3292,58 @@ <&gcc GCC_SDCC2_APPS_CLK>; clock-names = "iface", "core"; iommus = <&apps_smmu 0xa0 0xf>; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&sdhc2_opp_table>; status = "disabled"; + + sdhc2_opp_table: sdhc2-opp-table { + compatible = "operating-points-v2"; + + opp-9600000 { + opp-hz = /bits/ 64 <9600000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-201500000 { + opp-hz = /bits/ 64 <201500000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + qspi_opp_table: qspi-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; }; qspi: spi@88df000 { @@ -2924,6 +3355,8 @@ clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, <&gcc GCC_QSPI_CORE_CLK>; clock-names = "iface", "core"; + power-domains = <&rpmhpd SDM845_CX>; + operating-points-v2 = <&qspi_opp_table>; status = "disabled"; }; @@ -3296,6 +3729,35 @@ #power-domain-cells = <1>; }; + dsi_opp_table: dsi-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-275000000 { + opp-hz = /bits/ 64 <275000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-328580000 { + opp-hz = /bits/ 64 <328580000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + mdss: mdss@ae00000 { compatible = "qcom,sdm845-mdss"; reg = <0 0x0ae00000 0 0x1000>; @@ -3340,6 +3802,8 @@ <&dispcc DISP_CC_MDSS_VSYNC_CLK>; assigned-clock-rates = <300000000>, <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; interrupt-parent = <&mdss>; interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; @@ -3364,6 +3828,30 @@ }; }; }; + + mdp_opp_table: mdp-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-171428571 { + opp-hz = /bits/ 64 <171428571>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-344000000 { + opp-hz = /bits/ 64 <344000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; }; dsi0: dsi@ae94000 { @@ -3386,6 +3874,8 @@ "core", "iface", "bus"; + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; phys = <&dsi0_phy>; phy-names = "dsi"; @@ -3450,6 +3940,8 @@ "core", "iface", "bus"; + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SDM845_CX>; phys = <&dsi1_phy>; phy-names = "dsi"; @@ -3515,42 +4007,52 @@ qcom,gmu = <&gmu>; + interconnects = <&mem_noc MASTER_GFX3D &mem_noc SLAVE_EBI1>; + interconnect-names = "gfx-mem"; + gpu_opp_table: opp-table { compatible = "operating-points-v2"; opp-710000000 { opp-hz = /bits/ 64 <710000000>; opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + opp-peak-kBps = <7216000>; }; opp-675000000 { opp-hz = /bits/ 64 <675000000>; opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + opp-peak-kBps = <7216000>; }; opp-596000000 { opp-hz = /bits/ 64 <596000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + opp-peak-kBps = <6220000>; }; opp-520000000 { opp-hz = /bits/ 64 <520000000>; opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + opp-peak-kBps = <6220000>; }; opp-414000000 { opp-hz = /bits/ 64 <414000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + opp-peak-kBps = <4068000>; }; opp-342000000 { opp-hz = /bits/ 64 <342000000>; opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + opp-peak-kBps = <2724000>; }; opp-257000000 { opp-hz = /bits/ 64 <257000000>; opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + opp-peak-kBps = <1648000>; }; }; }; @@ -3724,6 +4226,21 @@ cell-index = <0>; }; + imem@146bf000 { + compatible = "simple-mfd"; + reg = <0 0x146bf000 0 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x146bf000 0x1000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sdm845-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x80000>; diff --git a/dts/src/arm64/qcom/sm8150-mtp.dts b/dts/src/arm64/qcom/sm8150-mtp.dts index 8ab16611eb..6c6325c3af 100644 --- a/dts/src/arm64/qcom/sm8150-mtp.dts +++ b/dts/src/arm64/qcom/sm8150-mtp.dts @@ -408,3 +408,24 @@ vdda-pll-supply = <&vreg_l3c_1p2>; vdda-pll-max-microamp = <19000>; }; + +&usb_1_hsphy { + status = "okay"; + vdda-pll-supply = <&vdd_usb_hs_core>; + vdda33-supply = <&vdda_usb_hs_3p1>; + vdda18-supply = <&vdda_usb_hs_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core_1>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; diff --git a/dts/src/arm64/qcom/sm8150.dtsi b/dts/src/arm64/qcom/sm8150.dtsi index 141c21dfa6..b86a7ead30 100644 --- a/dts/src/arm64/qcom/sm8150.dtsi +++ b/dts/src/arm64/qcom/sm8150.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/soc/qcom,rpmh-rsc.h> #include <dt-bindings/clock/qcom,rpmh.h> #include <dt-bindings/clock/qcom,gcc-sm8150.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -46,6 +47,7 @@ enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -62,6 +64,7 @@ enable-method = "psci"; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -76,6 +79,7 @@ enable-method = "psci"; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -89,6 +93,7 @@ enable-method = "psci"; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -102,6 +107,7 @@ enable-method = "psci"; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -115,6 +121,7 @@ enable-method = "psci"; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -128,6 +135,7 @@ enable-method = "psci"; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -141,6 +149,7 @@ enable-method = "psci"; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; + #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -538,6 +547,141 @@ }; }; + gpu: gpu@2c00000 { + /* + * note: the amd,imageon compatible makes it possible + * to use the drm/msm driver without the display node, + * make sure to remove it when display node is added + */ + compatible = "qcom,adreno-640.1", + "qcom,adreno", + "amd,imageon"; + #stream-id-cells = <16>; + + reg = <0 0x02c00000 0 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0 0x401>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + zap-shader { + memory-region = <&gpu_mem>; + }; + + /* note: downstream checks gpu binning for 675 Mhz */ + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-675000000 { + opp-hz = /bits/ 64 <675000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + opp-585000000 { + opp-hz = /bits/ 64 <585000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + }; + + opp-427000000 { + opp-hz = /bits/ 64 <427000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-345000000 { + opp-hz = /bits/ 64 <345000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-257000000 { + opp-hz = /bits/ 64 <257000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + }; + }; + + gmu: gmu@2c6a000 { + compatible="qcom,adreno-gmu-640.1", "qcom,adreno-gmu"; + + reg = <0 0x02c6a000 0 0x30000>, + <0 0x0b290000 0 0x10000>, + <0 0x0b490000 0 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc 0>, + <&gpucc 3>, + <&gpucc 6>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "ahb", "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc 0>, + <&gpucc 1>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5 0x400>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + + gpucc: clock-controller@2c90000 { + compatible = "qcom,sm8150-gpucc"; + reg = <0 0x02c90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@2ca0000 { + compatible = "qcom,sm8150-smmu-500", "arm,mmu-500"; + reg = <0 0x02ca0000 0 0x10000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 688 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gpucc 0>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "ahb", "bus", "iface"; + + power-domains = <&gpucc 0>; + }; + tlmm: pinctrl@3100000 { compatible = "qcom,sm8150-pinctrl"; reg = <0x0 0x03100000 0x0 0x300000>, @@ -621,6 +765,98 @@ }; }; + usb_1_hsphy: phy@88e2000 { + compatible = "qcom,sm8150-usb-hs-phy", + "qcom,usb-snps-hs-7nm-phy"; + reg = <0 0x088e2000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sm8150-qmp-usb3-phy"; + reg = <0 0x088e9000 0 0x18c>, + <0 0x088e8000 0 0x10>; + reg-names = "reg-base", "dp_com"; + status = "disabled"; + #clock-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>; + clock-names = "aux", "ref_clk_src", "ref", "com_aux"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: lanes@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x218>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm8150-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB3_SEC_CLKREF_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep", "xo"; + + assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>; + assigned-clock-rates = <19200000>, <150000000>; + + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "ss_phy_irq", + "dm_hs_phy_irq", "dp_hs_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: dwc3@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + aoss_qmp: power-controller@c300000 { compatible = "qcom,sm8150-aoss-qmp"; reg = <0x0 0x0c300000 0x0 0x100000>; @@ -631,6 +867,28 @@ #power-domain-cells = <1>; }; + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm8150-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x1ff>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm8150-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x1ff>; /* SROT */ + #qcom,sensors = <8>; + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x0c440000 0x0 0x0001100>, @@ -864,4 +1122,784 @@ <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; }; + + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu4_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu5_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu6_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu7_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster1_crit: cluster1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 15>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + wlan_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + mem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + q6_hvx_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + camera_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + compute-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + compute_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + modem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + npu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 8>; + + trips { + npu_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-vec-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 9>; + + trips { + modem_vec_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem-scl-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 10>; + + trips { + modem_scl_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 11>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; }; diff --git a/dts/src/arm64/qcom/sm8250-mtp.dts b/dts/src/arm64/qcom/sm8250-mtp.dts index cff7a85890..6894f8490d 100644 --- a/dts/src/arm64/qcom/sm8250-mtp.dts +++ b/dts/src/arm64/qcom/sm8250-mtp.dts @@ -7,6 +7,10 @@ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8250.dtsi" +#include "pm8150.dtsi" +#include "pm8150b.dtsi" +#include "pm8150l.dtsi" +#include "pm8009.dtsi" / { model = "Qualcomm Technologies, Inc. SM8250 MTP"; @@ -51,6 +55,11 @@ }; }; +&adsp { + status = "okay"; + firmware-name = "qcom/sm8250/adsp.mbn"; +}; + &apps_rsc { pm8150-rpmh-regulators { compatible = "qcom,pm8150-rpmh-regulators"; @@ -136,13 +145,6 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - vreg_l11a_0p75: ldo11 { - regulator-name = "vreg_l11a_0p75"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - vreg_l12a_1p8: ldo12 { regulator-name = "vreg_l12a_1p8"; regulator-min-microvolt = <1800000>; @@ -351,10 +353,24 @@ }; }; +&cdsp { + status = "okay"; + firmware-name = "qcom/sm8250/cdsp.mbn"; +}; + &qupv3_id_1 { status = "okay"; }; +&slpi { + status = "okay"; + firmware-name = "qcom/sm8250/slpi.mbn"; +}; + +&tlmm { + gpio-reserved-ranges = <28 4>, <40 4>; +}; + &uart2 { status = "okay"; }; diff --git a/dts/src/arm64/qcom/sm8250.dtsi b/dts/src/arm64/qcom/sm8250.dtsi index 7050adba79..377172e896 100644 --- a/dts/src/arm64/qcom/sm8250.dtsi +++ b/dts/src/arm64/qcom/sm8250.dtsi @@ -6,6 +6,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-sm8250.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/mailbox/qcom-ipcc.h> +#include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> @@ -15,6 +17,49 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; + i2c16 = &i2c16; + i2c17 = &i2c17; + i2c18 = &i2c18; + i2c19 = &i2c19; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + spi7 = &spi7; + spi8 = &spi8; + spi9 = &spi9; + spi10 = &spi10; + spi11 = &spi11; + spi12 = &spi12; + spi13 = &spi13; + spi14 = &spi14; + spi15 = &spi15; + spi16 = &spi16; + spi17 = &spi17; + spi18 = &spi18; + spi19 = &spi19; + }; + chosen { }; clocks { @@ -144,12 +189,6 @@ }; }; - tcsr_mutex: hwlock { - compatible = "qcom,tcsr-mutex"; - syscon = <&tcsr_mutex_regs 0 0x1000>; - #hwlock-cells = <1>; - }; - memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ @@ -269,6 +308,78 @@ hwlocks = <&tcsr_mutex 3>; }; + smp2p-adsp { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + smp2p_adsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_adsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-cdsp { + compatible = "qcom,smp2p"; + qcom,smem = <94>, <432>; + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + + smp2p_cdsp_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_cdsp_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_SMP2P>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + smp2p_slpi_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + + smp2p_slpi_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -286,27 +397,581 @@ clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>; }; + ipcc: mailbox@408000 { + compatible = "qcom,sm8250-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + qupv3_id_2: geniqup@8c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x008c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c14: i2c@880000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_default>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi14: spi@880000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00880000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_default>; + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c15: i2c@884000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_default>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi15: spi@884000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00884000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_default>; + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c16: i2c@888000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c16_default>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi16: spi@888000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00888000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi16_default>; + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c17: i2c@88c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c17_default>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi17: spi@88c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0088c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi17_default>; + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c18: i2c@890000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c18_default>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi18: spi@890000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00890000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi18_default>; + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c19: i2c@894000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c19_default>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi19: spi@894000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00894000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi19_default>; + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + qupv3_id_0: geniqup@9c0000 { + compatible = "qcom,geni-se-qup"; + reg = <0x0 0x009c0000 0x0 0x6000>; + clock-names = "m-ahb", "s-ahb"; + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00980000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_default>; + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00984000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_default>; + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00988000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_default>; + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0098c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0098c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_default>; + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00990000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_default>; + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00994000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00994000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_default>; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00998000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_default>; + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_default>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0099c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_default>; + interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + qupv3_id_1: geniqup@ac0000 { compatible = "qcom,geni-se-qup"; reg = <0x0 0x00ac0000 0x0 0x6000>; clock-names = "m-ahb", "s-ahb"; - clocks = <&gcc 133>, <&gcc 134>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; #address-cells = <2>; #size-cells = <2>; ranges; status = "disabled"; + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_default>; + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_default>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_default>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_default>; + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_default>; + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + uart2: serial@a90000 { compatible = "qcom,geni-debug-uart"; reg = <0x0 0x00a90000 0x0 0x4000>; clock-names = "se"; - clocks = <&gcc 113>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clock-names = "se"; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_default>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; - ufs_mem_hc: ufs@1d84000 { + ufs_mem_hc: ufshc@1d84000 { compatible = "qcom,sm8250-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; reg = <0 0x01d84000 0 0x3000>; @@ -376,13 +1041,229 @@ }; }; - intc: interrupt-controller@17a00000 { - compatible = "arm,gic-v3"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ - <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + gpu: gpu@3d00000 { + /* + * note: the amd,imageon compatible makes it possible + * to use the drm/msm driver without the display node, + * make sure to remove it when display node is added + */ + compatible = "qcom,adreno-650.2", + "qcom,adreno", + "amd,imageon"; + #stream-id-cells = <16>; + + reg = <0 0x03d00000 0 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0 0x401>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + zap-shader { + memory-region = <&gpu_mem>; + }; + + /* note: downstream checks gpu binning for 670 Mhz */ + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-670000000 { + opp-hz = /bits/ 64 <670000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + opp-587000000 { + opp-hz = /bits/ 64 <587000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + opp-525000000 { + opp-hz = /bits/ 64 <525000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>; + }; + + opp-490000000 { + opp-hz = /bits/ 64 <490000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-441600000 { + opp-hz = /bits/ 64 <441600000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-305000000 { + opp-hz = /bits/ 64 <305000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + }; + }; + + gmu: gmu@3d6a000 { + compatible="qcom,adreno-gmu-650.2", "qcom,adreno-gmu"; + + reg = <0 0x03d6a000 0 0x30000>, + <0 0x3de0000 0 0x10000>, + <0 0xb290000 0 0x10000>, + <0 0xb490000 0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc", "gmu_pdc_seq"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc 0>, + <&gpucc 3>, + <&gpucc 6>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "ahb", "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc 0>, + <&gpucc 1>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5 0x400>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + + gpucc: clock-controller@3d90000 { + compatible = "qcom,sm8250-gpucc"; + reg = <0 0x03d90000 0 0x9000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&gcc GCC_GPU_GPLL0_CLK_SRC>, + <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>; + clock-names = "bi_tcxo", + "gcc_gpu_gpll0_clk_src", + "gcc_gpu_gpll0_div_clk_src"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sm8250-smmu-500", "arm,mmu-500"; + reg = <0 0x03da0000 0 0x10000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gpucc 0>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>; + clock-names = "ahb", "bus", "iface"; + + power-domains = <&gpucc 0>; + }; + + slpi: remoteproc@5c00000 { + compatible = "qcom,sm8250-slpi-pas"; + reg = <0 0x05c00000 0 0x4000>; + + interrupts-extended = <&pdc 9 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_slpi_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_slpi_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, + <&rpmhpd SM8250_LCX>, + <&rpmhpd SM8250_LMX>; + power-domain-names = "load_state", "lcx", "lmx"; + + memory-region = <&slpi_mem>; + + qcom,smem-states = <&smp2p_slpi_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_SLPI + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <3>; + }; + }; + + cdsp: remoteproc@8300000 { + compatible = "qcom,sm8250-cdsp-pas"; + reg = <0 0x08300000 0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, + <&rpmhpd SM8250_CX>; + power-domain-names = "load_state", "cx"; + + memory-region = <&cdsp_mem>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <5>; + }; }; pdc: interrupt-controller@b220000 { @@ -395,7 +1276,20 @@ interrupt-controller; }; - spmi: qcom,spmi@c440000 { + aoss_qmp: qmp@c300000 { + compatible = "qcom,sm8250-aoss-qmp"; + reg = <0 0x0c300000 0 0x100000>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0 0x0c440000 0x0 0x0001100>, <0x0 0x0c600000 0x0 0x2000000>, @@ -413,82 +1307,633 @@ #interrupt-cells = <4>; }; - apps_rsc: rsc@18200000 { - label = "apps_rsc"; - compatible = "qcom,rpmh-rsc"; - reg = <0x0 0x18200000 0x0 0x10000>, - <0x0 0x18210000 0x0 0x10000>, - <0x0 0x18220000 0x0 0x10000>; - reg-names = "drv-0", "drv-1", "drv-2"; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - qcom,tcs-offset = <0xd00>; - qcom,drv-id = <2>; - qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, - <WAKE_TCS 3>, <CONTROL_TCS 1>; + tlmm: pinctrl@f100000 { + compatible = "qcom,sm8250-pinctrl"; + reg = <0 0x0f100000 0 0x300000>, + <0 0x0f500000 0 0x300000>, + <0 0x0f900000 0 0x300000>; + reg-names = "west", "south", "north"; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 180>; + wakeup-parent = <&pdc>; - rpmhcc: clock-controller { - compatible = "qcom,sm8250-rpmh-clk"; - #clock-cells = <1>; - clock-names = "xo"; - clocks = <&xo_board>; + qup_i2c0_default: qup-i2c0-default { + mux { + pins = "gpio28", "gpio29"; + function = "qup0"; + }; + + config { + pins = "gpio28", "gpio29"; + drive-strength = <2>; + bias-disable; + }; }; - rpmhpd: power-controller { - compatible = "qcom,sm8250-rpmhpd"; - #power-domain-cells = <1>; - operating-points-v2 = <&rpmhpd_opp_table>; + qup_i2c1_default: qup-i2c1-default { + pinmux { + pins = "gpio4", "gpio5"; + function = "qup1"; + }; - rpmhpd_opp_table: opp-table { - compatible = "operating-points-v2"; + config { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-disable; + }; + }; - rpmhpd_opp_ret: opp1 { - opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; - }; + qup_i2c2_default: qup-i2c2-default { + mux { + pins = "gpio115", "gpio116"; + function = "qup2"; + }; - rpmhpd_opp_min_svs: opp2 { - opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; - }; + config { + pins = "gpio115", "gpio116"; + drive-strength = <2>; + bias-disable; + }; + }; - rpmhpd_opp_low_svs: opp3 { - opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; - }; + qup_i2c3_default: qup-i2c3-default { + mux { + pins = "gpio119", "gpio120"; + function = "qup3"; + }; - rpmhpd_opp_svs: opp4 { - opp-level = <RPMH_REGULATOR_LEVEL_SVS>; - }; + config { + pins = "gpio119", "gpio120"; + drive-strength = <2>; + bias-disable; + }; + }; - rpmhpd_opp_svs_l1: opp5 { - opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; - }; + qup_i2c4_default: qup-i2c4-default { + mux { + pins = "gpio8", "gpio9"; + function = "qup4"; + }; - rpmhpd_opp_nom: opp6 { - opp-level = <RPMH_REGULATOR_LEVEL_NOM>; - }; + config { + pins = "gpio8", "gpio9"; + drive-strength = <2>; + bias-disable; + }; + }; - rpmhpd_opp_nom_l1: opp7 { - opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; - }; + qup_i2c5_default: qup-i2c5-default { + mux { + pins = "gpio12", "gpio13"; + function = "qup5"; + }; - rpmhpd_opp_nom_l2: opp8 { - opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; - }; + config { + pins = "gpio12", "gpio13"; + drive-strength = <2>; + bias-disable; + }; + }; - rpmhpd_opp_turbo: opp9 { - opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; - }; + qup_i2c6_default: qup-i2c6-default { + mux { + pins = "gpio16", "gpio17"; + function = "qup6"; + }; - rpmhpd_opp_turbo_l1: opp10 { - opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; - }; + config { + pins = "gpio16", "gpio17"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c7_default: qup-i2c7-default { + mux { + pins = "gpio20", "gpio21"; + function = "qup7"; + }; + + config { + pins = "gpio20", "gpio21"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c8_default: qup-i2c8-default { + mux { + pins = "gpio24", "gpio25"; + function = "qup8"; + }; + + config { + pins = "gpio24", "gpio25"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c9_default: qup-i2c9-default { + mux { + pins = "gpio125", "gpio126"; + function = "qup9"; + }; + + config { + pins = "gpio125", "gpio126"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c10_default: qup-i2c10-default { + mux { + pins = "gpio129", "gpio130"; + function = "qup10"; + }; + + config { + pins = "gpio129", "gpio130"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c11_default: qup-i2c11-default { + mux { + pins = "gpio60", "gpio61"; + function = "qup11"; + }; + + config { + pins = "gpio60", "gpio61"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c12_default: qup-i2c12-default { + mux { + pins = "gpio32", "gpio33"; + function = "qup12"; + }; + + config { + pins = "gpio32", "gpio33"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c13_default: qup-i2c13-default { + mux { + pins = "gpio36", "gpio37"; + function = "qup13"; + }; + + config { + pins = "gpio36", "gpio37"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c14_default: qup-i2c14-default { + mux { + pins = "gpio40", "gpio41"; + function = "qup14"; + }; + + config { + pins = "gpio40", "gpio41"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c15_default: qup-i2c15-default { + mux { + pins = "gpio44", "gpio45"; + function = "qup15"; + }; + + config { + pins = "gpio44", "gpio45"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c16_default: qup-i2c16-default { + mux { + pins = "gpio48", "gpio49"; + function = "qup16"; + }; + + config { + pins = "gpio48", "gpio49"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c17_default: qup-i2c17-default { + mux { + pins = "gpio52", "gpio53"; + function = "qup17"; + }; + + config { + pins = "gpio52", "gpio53"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c18_default: qup-i2c18-default { + mux { + pins = "gpio56", "gpio57"; + function = "qup18"; + }; + + config { + pins = "gpio56", "gpio57"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_i2c19_default: qup-i2c19-default { + mux { + pins = "gpio0", "gpio1"; + function = "qup19"; + }; + + config { + pins = "gpio0", "gpio1"; + drive-strength = <2>; + bias-disable; + }; + }; + + qup_spi0_default: qup-spi0-default { + mux { + pins = "gpio28", "gpio29", + "gpio30", "gpio31"; + function = "qup0"; + }; + + config { + pins = "gpio28", "gpio29", + "gpio30", "gpio31"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi1_default: qup-spi1-default { + mux { + pins = "gpio4", "gpio5", + "gpio6", "gpio7"; + function = "qup1"; + }; + + config { + pins = "gpio4", "gpio5", + "gpio6", "gpio7"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi2_default: qup-spi2-default { + mux { + pins = "gpio115", "gpio116", + "gpio117", "gpio118"; + function = "qup2"; + }; + + config { + pins = "gpio115", "gpio116", + "gpio117", "gpio118"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi3_default: qup-spi3-default { + mux { + pins = "gpio119", "gpio120", + "gpio121", "gpio122"; + function = "qup3"; + }; + + config { + pins = "gpio119", "gpio120", + "gpio121", "gpio122"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi4_default: qup-spi4-default { + mux { + pins = "gpio8", "gpio9", + "gpio10", "gpio11"; + function = "qup4"; + }; + + config { + pins = "gpio8", "gpio9", + "gpio10", "gpio11"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi5_default: qup-spi5-default { + mux { + pins = "gpio12", "gpio13", + "gpio14", "gpio15"; + function = "qup5"; + }; + + config { + pins = "gpio12", "gpio13", + "gpio14", "gpio15"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi6_default: qup-spi6-default { + mux { + pins = "gpio16", "gpio17", + "gpio18", "gpio19"; + function = "qup6"; + }; + + config { + pins = "gpio16", "gpio17", + "gpio18", "gpio19"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi7_default: qup-spi7-default { + mux { + pins = "gpio20", "gpio21", + "gpio22", "gpio23"; + function = "qup7"; + }; + + config { + pins = "gpio20", "gpio21", + "gpio22", "gpio23"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi8_default: qup-spi8-default { + mux { + pins = "gpio24", "gpio25", + "gpio26", "gpio27"; + function = "qup8"; + }; + + config { + pins = "gpio24", "gpio25", + "gpio26", "gpio27"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi9_default: qup-spi9-default { + mux { + pins = "gpio125", "gpio126", + "gpio127", "gpio128"; + function = "qup9"; + }; + + config { + pins = "gpio125", "gpio126", + "gpio127", "gpio128"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi10_default: qup-spi10-default { + mux { + pins = "gpio129", "gpio130", + "gpio131", "gpio132"; + function = "qup10"; + }; + + config { + pins = "gpio129", "gpio130", + "gpio131", "gpio132"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi11_default: qup-spi11-default { + mux { + pins = "gpio60", "gpio61", + "gpio62", "gpio63"; + function = "qup11"; + }; + + config { + pins = "gpio60", "gpio61", + "gpio62", "gpio63"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi12_default: qup-spi12-default { + mux { + pins = "gpio32", "gpio33", + "gpio34", "gpio35"; + function = "qup12"; + }; + + config { + pins = "gpio32", "gpio33", + "gpio34", "gpio35"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi13_default: qup-spi13-default { + mux { + pins = "gpio36", "gpio37", + "gpio38", "gpio39"; + function = "qup13"; + }; + + config { + pins = "gpio36", "gpio37", + "gpio38", "gpio39"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi14_default: qup-spi14-default { + mux { + pins = "gpio40", "gpio41", + "gpio42", "gpio43"; + function = "qup14"; + }; + + config { + pins = "gpio40", "gpio41", + "gpio42", "gpio43"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi15_default: qup-spi15-default { + mux { + pins = "gpio44", "gpio45", + "gpio46", "gpio47"; + function = "qup15"; + }; + + config { + pins = "gpio44", "gpio45", + "gpio46", "gpio47"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi16_default: qup-spi16-default { + mux { + pins = "gpio48", "gpio49", + "gpio50", "gpio51"; + function = "qup16"; + }; + + config { + pins = "gpio48", "gpio49", + "gpio50", "gpio51"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi17_default: qup-spi17-default { + mux { + pins = "gpio52", "gpio53", + "gpio54", "gpio55"; + function = "qup17"; + }; + + config { + pins = "gpio52", "gpio53", + "gpio54", "gpio55"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi18_default: qup-spi18-default { + mux { + pins = "gpio56", "gpio57", + "gpio58", "gpio59"; + function = "qup18"; + }; + + config { + pins = "gpio56", "gpio57", + "gpio58", "gpio59"; + drive-strength = <6>; + bias-disable; + }; + }; + + qup_spi19_default: qup-spi19-default { + mux { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + function = "qup19"; + }; + + config { + pins = "gpio0", "gpio1", + "gpio2", "gpio3"; + drive-strength = <6>; + bias-disable; }; }; }; - tcsr_mutex_regs: syscon@1f40000 { - compatible = "syscon"; - reg = <0x0 0x01f40000 0x0 0x40000>; + adsp: remoteproc@17300000 { + compatible = "qcom,sm8250-adsp-pas"; + reg = <0 0x17300000 0 0x100>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_LEVEL_HIGH>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, + <&rpmhpd SM8250_LCX>, + <&rpmhpd SM8250_LMX>; + power-domain-names = "load_state", "lcx", "lmx"; + + memory-region = <&adsp_mem>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + }; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sm8250", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; }; timer@17c20000 { @@ -550,6 +1995,78 @@ }; }; + apps_rsc: rsc@18200000 { + label = "apps_rsc"; + compatible = "qcom,rpmh-rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>, + <WAKE_TCS 3>, <CONTROL_TCS 1>; + + rpmhcc: clock-controller { + compatible = "qcom,sm8250-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm8250-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + }; + }; + }; }; timer { diff --git a/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi b/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi new file mode 100644 index 0000000000..66c9153b31 --- /dev/null +++ b/dts/src/arm64/renesas/beacon-renesom-baseboard.dtsi @@ -0,0 +1,758 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020, Compass Electronics Group, LLC + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + backlight_lvds: backlight-lvds { + compatible = "pwm-backlight"; + power-supply = <®_lcd>; + enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_LOW>; + pwms = <&pwm2 0 50000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + backlight_rgb: backlight-rgb { + compatible = "pwm-backlight"; + power-supply = <®_lcd>; + enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>; + pwms = <&pwm0 0 50000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + hdmi0-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con: endpoint { + remote-endpoint = <&rcar_dw_hdmi0_out>; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + + key-1 { + gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_1>; + label = "Switch-1"; + wakeup-source; + debounce-interval = <20>; + }; + key-2 { + gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_2>; + label = "Switch-2"; + wakeup-source; + debounce-interval = <20>; + }; + key-3 { + gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; + linux,code = <KEY_3>; + label = "Switch-3"; + wakeup-source; + debounce-interval = <20>; + }; + key-4 { + gpios = <&gpio5 20 GPIO_ACTIVE_LOW>; + linux,code = <KEY_4>; + label = "Switch-4"; + wakeup-source; + debounce-interval = <20>; + }; + key-5 { + gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; + linux,code = <KEY_5>; + label = "Switch-4"; + wakeup-source; + debounce-interval = <20>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + led0 { + gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + label = "LED0"; + linux,default-trigger = "heartbeat"; + }; + led1 { + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + label = "LED1"; + }; + led2 { + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + label = "LED2"; + }; + led3 { + gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; + label = "LED3"; + }; + }; + + lvds { + compatible = "panel-lvds"; + power-supply = <®_lcd_reset>; + width-mm = <223>; + height-mm = <125>; + backlight = <&backlight_lvds>; + data-mapping = "vesa-24"; + + panel-timing { + /* 800x480@60Hz */ + clock-frequency = <30000000>; + hactive = <800>; + vactive = <480>; + hsync-len = <48>; + hfront-porch = <40>; + hback-porch = <40>; + vfront-porch = <13>; + vback-porch = <29>; + vsync-len = <3>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + rgb { + /* Different LCD with compatible timings */ + compatible = "rocktech,rk070er9427"; + backlight = <&backlight_rgb>; + enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + power-supply = <®_lcd>; + port { + rgb_panel: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + }; + + reg_audio: regulator_audio { + compatible = "regulator-fixed"; + regulator-name = "audio-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio_exp2 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd: regulator-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd_panel_pwr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd_reset: regulator-lcd-reset { + compatible = "regulator-fixed"; + regulator-name = "nLCD_RESET"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_lcd>; + }; + + reg_cam0: regulator_camera { + compatible = "regulator-fixed"; + regulator-name = "reg_cam0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio_exp2 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_cam1: regulator_camera { + compatible = "regulator-fixed"; + regulator-name = "reg_cam1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio_exp2 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + startup-delay-us = <100000>; + }; + + sound_card { + compatible = "audio-graph-card"; + label = "rcar-sound"; + dais = <&rsnd_port0>, <&rsnd_port1>; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1>, <1800000 0>; + regulator-always-on; + }; + + /* External DU dot clocks */ + x302_clk: x302-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + + x304_clk: x304-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; +}; + +&audio_clk_a { + clock-frequency = <24576000>; + assigned-clocks = <&versaclock6_bb 4>; + assigned-clock-rates = <24576000>; +}; + +&audio_clk_b { + clock-frequency = <22579200>; +}; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; + renesas,can-clock-select = <0x0>; + status = "okay"; +}; + +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + renesas,can-clock-select = <0x0>; + status = "okay"; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; + +&du_out_rgb { + remote-endpoint = <&rgb_panel>; +}; + +&ehci0 { + dr_mode = "otg"; + status = "okay"; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; +}; + +&ehci1 { + status = "okay"; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; +}; + +&hdmi0 { + status = "okay"; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; + }; + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint1>; + }; + }; + }; +}; + +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c2 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + gpio_exp2: gpio@21 { + compatible = "onnn,pca9654"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_exp3: gpio@22 { + compatible = "onnn,pca9654"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_exp4: gpio@23 { + compatible = "onnn,pca9654"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + versaclock6_bb: clock-controller@6a { + compatible = "idt,5p49v6965"; + reg = <0x6a>; + #clock-cells = <1>; + clocks = <&x304_clk>; + clock-names = "xin"; + /* CSI0_MCLK, CSI1_MCLK, AUDIO_CLKIN, USB_HUB_MCLK_BB */ + assigned-clocks = <&versaclock6_bb 1>, + <&versaclock6_bb 2>, + <&versaclock6_bb 3>, + <&versaclock6_bb 4>; + assigned-clock-rates = <24000000>, <24000000>, <24000000>, <24576000>; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; +}; + +&i2c5 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-0 = <&i2c5_pins>; + pinctrl-names = "default"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + DCVDD-supply = <®_audio>; + DBVDD-supply = <®_audio>; + AVDD-supply = <®_audio>; + CPVDD-supply = <®_audio>; + MICVDD-supply = <®_audio>; + PLLVDD-supply = <®_audio>; + SPKVDD1-supply = <®_audio>; + SPKVDD2-supply = <®_audio>; + gpio-cfg = < + 0x0000 /* 0:Default */ + 0x0000 /* 1:Default */ + 0x0000 /* 2:Default */ + 0x0000 /* 3:Default */ + 0x0000 /* 4:Default */ + 0x0000 /* 5:Default */ + >; + port { + wm8962_endpoint: endpoint { + remote-endpoint = <&rsnd_endpoint0>; + }; + }; + }; + + /* 0 - lcd_reset */ + /* 1 - lcd_pwr */ + /* 2 - lcd_select */ + /* 3 - backlight-enable */ + /* 4 - Touch_shdwn */ + /* 5 - LCD_H_pol */ + /* 6 - lcd_V_pol */ + gpio_exp1: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + touchscreen@26 { + compatible = "ilitek,ili2117"; + reg = <0x26>; + interrupt-parent = <&gpio5>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; + wakeup-source; + }; + + hd3ss3220@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + interrupt-parent = <&gpio6>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + hd3ss3220_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; + }; + }; +}; + +&lvds0 { + status = "okay"; + + ports { + port@1 { + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pciec0 { + status = "okay"; +}; + +&pciec1 { + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pfc { + can0_pins: can0 { + groups = "can0_data_a"; + function = "can0"; + }; + + can1_pins: can1 { + groups = "can1_data"; + function = "can1"; + }; + + du_pins: du { + groups = "du_rgb888", "du_sync", "du_clk_out_1", "du_disp"; + function = "du"; + }; + + i2c2_pins: i2c2 { + groups = "i2c2_a"; + function = "i2c2"; + }; + + i2c5_pins: i2c5 { + groups = "i2c5"; + function = "i2c5"; + }; + + led_pins: leds { + /* GP_0_4 , AVS1, AVS2, GP_7_3 */ + pins = "GP_0_4", "GP_7_0", "GP_7_1", "GP_7_3"; + bias-pull-down; + }; + + pwm0_pins: pwm0 { + groups = "pwm0"; + function = "pwm0"; + }; + + pwm2_pins: pwm2 { + groups = "pwm2_a"; + function = "pwm2_a"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; + function = "ssi"; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clk_a_a"; + function = "audio_clk"; + }; + + usb0_pins: usb0 { + mux { + groups = "usb0"; + function = "usb0"; + }; + }; + + usb1_pins: usb1 { + mux { + groups = "usb1"; + function = "usb1"; + }; + }; + + usb30_pins: usb30 { + mux { + groups = "usb30"; + function = "usb30"; + }; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&pwm2 { + pinctrl-0 = <&pwm2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <11289600>; + + status = "okay"; + + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, + <&cpg CPG_CORE R8A774A1_CLK_S0D4>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + rsnd_port0: port@0 { + reg = <0>; + rsnd_endpoint0: endpoint { + remote-endpoint = <&wm8962_endpoint>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint0>; + frame-master = <&rsnd_endpoint0>; + + playback = <&ssi1 &dvc1 &src1>; + capture = <&ssi0>; + }; + }; + rsnd_port1: port@1 { + reg = <0x01>; + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint1>; + frame-master = <&rsnd_endpoint1>; + + playback = <&ssi2>; + }; + }; + }; +}; + +&rwdt { + status = "okay"; + timeout-sec = <60>; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&scif5 { + pinctrl-0 = <&scif5_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&ssi1 { + shared-pin; +}; + +&tmu0 { + status = "okay"; +}; + +&tmu1 { + status = "okay"; +}; + +&tmu2 { + status = "okay"; +}; + +&tmu3 { + status = "okay"; +}; + +&tmu4 { + status = "okay"; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb3_peri0 { + companion = <&xhci0>; + status = "okay"; + usb-role-switch; + + port { + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_ep>; + }; + }; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&vin0 { + status = "okay"; +}; +&vin1 { + status = "okay"; +}; +&vin2 { + status = "okay"; +}; +&vin3 { + status = "okay"; +}; +&vin4 { + status = "okay"; +}; +&vin5 { + status = "okay"; +}; +&vin6 { + status = "okay"; +}; +&vin7 { + status = "okay"; +}; + +&xhci0 +{ + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/beacon-renesom-som.dtsi b/dts/src/arm64/renesas/beacon-renesom-som.dtsi new file mode 100644 index 0000000000..97272f5fa0 --- /dev/null +++ b/dts/src/arm64/renesas/beacon-renesom-som.dtsi @@ -0,0 +1,312 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020, Compass Electronics Group, LLC + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; + + osc_32k: osc_32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "osc_32k"; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + wlan_pwrseq: wlan_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pca9654 1 GPIO_ACTIVE_LOW>; + clocks = <&osc_32k>; + clock-names = "ext_clock"; + post-power-on-delay-ms = <80>; + }; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&gpio6 { + usb_hub_reset { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&hscif0 { + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + status = "okay"; + max-speed = <4000000>; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&pca9654 2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&pca9654 5 GPIO_ACTIVE_HIGH>; + clocks = <&osc_32k>; + clock-names = "extclk"; + }; +}; + +&hscif2 { + status = "okay"; + pinctrl-0 = <&hscif2_pins>; + pinctrl-names = "default"; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + pca9654: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "i2c4_20_0", + "wl_reg_on", + "bt_reg_on", + "i2c4_20_3", + "i2c4_20_4", + "bt_dev_wake", + "i2c4_20_6", + "i2c4_20_7"; + }; + + pca9654_lte: gpio@21 { + compatible = "onnn,pca9654"; + reg = <0x21>; + interrupt-parent = <&gpio5>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = + "i2c4_21_0", + "zoe_pwr_on", + "zoe_extint", + "zoe_reset_n", + "sara_reset", + "i2c4_21_5", + "sara_pwr_off", + "sara_networking_status"; + }; + + eeprom@50 { + compatible = "microchip,at24c64", "atmel,24c64"; + pagesize = <32>; + read-only; /* Manufacturing EEPROM programmed at factory */ + reg = <0x50>; + }; + + rtc@51 { + compatible = "nxp,pcf85263"; + reg = <0x51>; + }; + + versaclock5: versaclock_som@6a { + compatible = "idt,5p49v6965"; + reg = <0x6a>; + #clock-cells = <1>; + clocks = <&x304_clk>; + clock-names = "xin"; + /* du_dotclkin0, du_dotclkin2, usb_extal, avb_txcrefclk */ + assigned-clocks = <&versaclock5 1>, + <&versaclock5 2>, + <&versaclock5 3>, + <&versaclock5 4>; + assigned-clock-rates = <33333333>, <33333333>, <50000000>, <125000000>; + }; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + avb_pins: avb { + mux { + groups = "avb_link", "avb_mdio", "avb_mii"; + function = "avb"; + }; + + pins_mdio { + groups = "avb_mdio"; + drive-strength = <24>; + }; + + pins_mii_tx { + pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", + "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; + drive-strength = <12>; + }; + }; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + hscif0_pins: hscif0 { + groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + + hscif1_pins: hscif1 { + groups = "hscif1_data_a", "hscif1_ctrl_a"; + function = "hscif1"; + }; + + hscif2_pins: hscif2 { + groups = "hscif2_data_a"; + function = "hscif2"; + }; + + scif0_pins: scif0 { + groups = "scif0_data"; + function = "scif0"; + }; + + scif5_pins: scif5 { + groups = "scif5_data_a"; + function = "scif5"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + i2c0_pins: i2c0 { + groups = "i2c0"; + function = "i2c0"; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds"; + function = "sdhi3"; + power-source = <1800>; + }; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhi2 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhi2_pins>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + non-removable; + cap-power-off-card; + pm-ignore-notify; + keep-power-in-suspend; + mmc-pwrseq = <&wlan_pwrseq>; + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio1>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-1 = <&sdhi3_pins>; + pinctrl-names = "default", "state_uhs"; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; + +&usb_extal_clk { + clock-frequency = <50000000>; +}; + +&usb3s0_clk { + clock-frequency = <100000000>; +}; + +&vspb { + status = "okay"; +}; + +&vspi0 { + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/cat875.dtsi b/dts/src/arm64/renesas/cat875.dtsi index aaefc3ae56..33daa95706 100644 --- a/dts/src/arm64/renesas/cat875.dtsi +++ b/dts/src/arm64/renesas/cat875.dtsi @@ -18,7 +18,6 @@ pinctrl-names = "default"; renesas,no-ether-link; phy-handle = <&phy0>; - phy-mode = "rgmii"; status = "okay"; phy0: ethernet-phy@0 { diff --git a/dts/src/arm64/renesas/hihope-common.dtsi b/dts/src/arm64/renesas/hihope-common.dtsi index bd056904e8..2eda9f66ae 100644 --- a/dts/src/arm64/renesas/hihope-common.dtsi +++ b/dts/src/arm64/renesas/hihope-common.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the HiHope RZ/G2[MN] main board common parts + * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and + * HiHope RZ/G2[MN] Rev.[2.0/3.0/4.0] main board common parts * * Copyright (C) 2019 Renesas Electronics Corp. */ @@ -32,17 +33,6 @@ leds { compatible = "gpio-leds"; - bt_active_led { - label = "blue:bt"; - gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "hci0-power"; - default-state = "off"; - }; - - led0 { - gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; - }; - led1 { gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; }; @@ -55,11 +45,8 @@ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; }; - wlan_active_led { - label = "yellow:wlan"; - gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tx"; - default-state = "off"; + led4 { + gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; }; }; @@ -112,17 +99,6 @@ states = <3300000 1>, <1800000 0>; }; - wlan_en_reg: regulator-wlan_en { - compatible = "regulator-fixed"; - regulator-name = "wlan-en-regulator"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - startup-delay-us = <70000>; - - gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - x302_clk: x302-clock { compatible = "fixed-clock"; #clock-cells = <0>; @@ -194,11 +170,6 @@ uart-has-rtscts; status = "okay"; - - bluetooth { - compatible = "ti,wl1837-st"; - enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>; - }; }; &hsusb { @@ -210,13 +181,6 @@ clock-frequency = <400000>; status = "okay"; - gpio_expander: gpio@20 { - compatible = "onnn,pca9654"; - reg = <0x20>; - gpio-controller; - #gpio-cells = <2>; - }; - versaclock5: clock-generator@6a { compatible = "idt,5p49v5923"; reg = <0x6a>; @@ -281,11 +245,6 @@ power-source = <1800>; }; - sound_clk_pins: sound_clk { - groups = "audio_clk_a_a"; - function = "audio_clk"; - }; - usb0_pins: usb0 { groups = "usb0"; function = "usb0"; @@ -309,28 +268,6 @@ }; }; -&rcar_sound { - pinctrl-0 = <&sound_clk_pins>; - pinctrl-names = "default"; - - status = "okay"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - rsnd_port: port { - rsnd_endpoint: endpoint { - remote-endpoint = <&dw_hdmi0_snd_in>; - - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint>; - frame-master = <&rsnd_endpoint>; - - playback = <&ssi2>; - }; - }; -}; - &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/dts/src/arm64/renesas/hihope-rev2.dtsi b/dts/src/arm64/renesas/hihope-rev2.dtsi new file mode 100644 index 0000000000..8e2db1d6ca --- /dev/null +++ b/dts/src/arm64/renesas/hihope-rev2.dtsi @@ -0,0 +1,86 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2[MN] main board Rev.2.0 common + * parts + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include "hihope-common.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + + bt_active_led { + label = "blue:bt"; + gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + + wlan_active_led { + label = "yellow:wlan"; + gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + }; + + wlan_en_reg: regulator-wlan_en { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <70000>; + + gpio = <&gpio_expander 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&hscif0 { + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio_expander 2 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c4 { + gpio_expander: gpio@20 { + compatible = "onnn,pca9654"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&pfc { + sound_clk_pins: sound_clk { + groups = "audio_clk_a_a"; + function = "audio_clk"; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_clk_pins>; + pinctrl-names = "default"; + + status = "okay"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + rsnd_port: port { + rsnd_endpoint: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint>; + frame-master = <&rsnd_endpoint>; + + playback = <&ssi2>; + }; + }; +}; diff --git a/dts/src/arm64/renesas/hihope-rev4.dtsi b/dts/src/arm64/renesas/hihope-rev4.dtsi new file mode 100644 index 0000000000..3046c07a28 --- /dev/null +++ b/dts/src/arm64/renesas/hihope-rev4.dtsi @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2H Rev.4.0 and + * HiHope RZ/G2[MN] Rev.3.0/4.0 main board common parts + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> +#include "hihope-common.dtsi" + +/ { + audio_clkout: audio-clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; + + wlan_en_reg: regulator-wlan_en { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <70000>; + + gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + x1801_clk: x1801-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; +}; + +&hscif0 { + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + status = "okay"; + + cs2000: clk_multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x1801_clk>; + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; +}; + +&pfc { + i2c2_pins: i2c2 { + groups = "i2c2_a"; + function = "i2c2"; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clkout_a"; + function = "audio_clk"; + }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; + function = "ssi"; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + status = "okay"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <12288000 11289600>; + + /* update <audio_clk_b> to <cs2000> */ + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&cs2000>, + <&audio_clk_c>, + <&cpg CPG_CORE CPG_AUDIO_CLK_I>; + + rsnd_port: port { + rsnd_endpoint: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint>; + frame-master = <&rsnd_endpoint>; + + playback = <&ssi2>; + }; + }; +}; diff --git a/dts/src/arm64/renesas/hihope-rzg2-ex-lvds.dtsi b/dts/src/arm64/renesas/hihope-rzg2-ex-lvds.dtsi new file mode 100644 index 0000000000..40c5e8d6d8 --- /dev/null +++ b/dts/src/arm64/renesas/hihope-rzg2-ex-lvds.dtsi @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZ/G2[MN] HiHope sub board LVDS common parts + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/ { + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 50000>; + + brightness-levels = <0 2 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; + +&gpio1 { + /* + * When GP1_20 is LOW LVDS0 is connected to the LVDS connector + * When GP1_20 is HIGH LVDS0 is connected to the LT8918L + */ + lvds-connector-en-gpio { + gpio-hog; + gpios = <20 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "lvds-connector-en-gpio"; + }; +}; + +&lvds0 { + ports { + port@1 { + lvds_connector: endpoint { + }; + }; + }; +}; + +&pfc { + pwm0_pins: pwm0 { + groups = "pwm0"; + function = "pwm0"; + }; +}; + +&pwm0 { + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/hihope-rzg2-ex.dtsi b/dts/src/arm64/renesas/hihope-rzg2-ex.dtsi index 28fe17e3bc..178401a34c 100644 --- a/dts/src/arm64/renesas/hihope-rzg2-ex.dtsi +++ b/dts/src/arm64/renesas/hihope-rzg2-ex.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the RZ/G2[MN] HiHope sub board common parts + * Device Tree Source for the RZ/G2[HMN] HiHope sub board common parts * * Copyright (C) 2019 Renesas Electronics Corp. */ @@ -13,14 +13,6 @@ chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; }; - - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 50000>; - - brightness-levels = <0 2 8 16 32 64 128 255>; - default-brightness-level = <6>; - }; }; &avb { @@ -51,35 +43,6 @@ status = "okay"; }; -&gpio1 { - /* - * When GP1_20 is LOW LVDS0 is connected to the LVDS connector - * When GP1_20 is HIGH LVDS0 is connected to the LT8918L - */ - lvds-connector-en-gpio { - gpio-hog; - gpios = <20 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "lvds-connector-en-gpio"; - }; -}; - -&lvds0 { - /* - * Please include the LVDS panel .dtsi file and uncomment the below line - * to enable LVDS panel connected to RZ/G2[MN] boards. - */ - - /* status = "okay"; */ - - ports { - port@1 { - lvds_connector: endpoint { - }; - }; - }; -}; - &pciec0 { status = "okay"; }; diff --git a/dts/src/arm64/renesas/r8a774a1-beacon-rzg2m-kit.dts b/dts/src/arm64/renesas/r8a774a1-beacon-rzg2m-kit.dts new file mode 100644 index 0000000000..2c5b057c30 --- /dev/null +++ b/dts/src/arm64/renesas/r8a774a1-beacon-rzg2m-kit.dts @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2020, Compass Electronics Group, LLC + */ + +/dts-v1/; + +#include "r8a774a1.dtsi" +#include "beacon-renesom-som.dtsi" +#include "beacon-renesom-baseboard.dtsi" + +/ { + model = "Beacon EmbeddedWorks RZ/G2M Development Kit"; + compatible = "beacon,beacon-rzg2m", "renesas,r8a774a1"; + + aliases { + serial0 = &scif2; + serial1 = &hscif0; + serial2 = &hscif1; + serial3 = &scif0; + serial4 = &hscif2; + serial5 = &scif5; + ethernet0 = &avb; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; diff --git a/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts index 2ab5edd84e..06c04c59cc 100644 --- a/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts +++ b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-ex-idk-1110wr.dts @@ -1,52 +1,15 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the HiHope RZ/G2M sub board connected to an - * Advantech IDK-1110WR 10.1" LVDS panel + * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 sub board connected + * to an Advantech IDK-1110WR 10.1" LVDS panel * * Copyright (C) 2020 Renesas Electronics Corp. */ #include "r8a774a1-hihope-rzg2m-ex.dts" +#include "hihope-rzg2-ex-lvds.dtsi" #include "rzg2-advantech-idk-1110wr-panel.dtsi" -/ { - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 50000>; - - brightness-levels = <0 2 8 16 32 64 128 255>; - default-brightness-level = <6>; - }; - -}; - -&gpio1 { - /* - * When GP1_20 is LOW LVDS0 is connected to the LVDS connector - * When GP1_20 is HIGH LVDS0 is connected to the LT8918L - */ - lvds-connector-en-gpio { - gpio-hog; - gpios = <20 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "lvds-connector-en-gpio"; - }; -}; - &lvds0 { status = "okay"; }; - -&pfc { - pwm0_pins: pwm0 { - groups = "pwm0"; - function = "pwm0"; - }; -}; - -&pwm0 { - pinctrl-0 = <&pwm0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; diff --git a/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-ex.dts b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-ex.dts index c754fca239..a5ca86196a 100644 --- a/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-ex.dts +++ b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-ex.dts @@ -1,8 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the HiHope RZ/G2M sub board + * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 connected to + * sub board * - * Copyright (C) 2019 Renesas Electronics Corp. + * Copyright (C) 2020 Renesas Electronics Corp. */ #include "r8a774a1-hihope-rzg2m.dts" @@ -14,6 +15,7 @@ "renesas,r8a774a1"; }; +/* SW43 should be OFF, if in ON state SATA port will be activated */ &pciec1 { status = "okay"; }; diff --git a/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts new file mode 100644 index 0000000000..c0e9d8ca4a --- /dev/null +++ b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-rev2-ex-idk-1110wr.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M Rev.2.0 sub board connected to an + * Advantech IDK-1110WR 10.1" LVDS panel + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include "r8a774a1-hihope-rzg2m-rev2-ex.dts" +#include "hihope-rzg2-ex-lvds.dtsi" +#include "rzg2-advantech-idk-1110wr-panel.dtsi" + +&lvds0 { + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts new file mode 100644 index 0000000000..2221cf6aed --- /dev/null +++ b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-rev2-ex.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M Rev.2.0 connected to sub board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include "r8a774a1-hihope-rzg2m-rev2.dts" +#include "hihope-rzg2-ex.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2M (Rev.2.0) with sub board"; + compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m", + "renesas,r8a774a1"; +}; + +/* SW43 should be OFF, if in ON state SATA port will be activated */ +&pciec1 { + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-rev2.dts b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-rev2.dts new file mode 100644 index 0000000000..bb18f6ee20 --- /dev/null +++ b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-rev2.dts @@ -0,0 +1,37 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M Rev.2.0 main board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774a1.dtsi" +#include "hihope-rev2.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2M main board (Rev.2.0) based on r8a774a1"; + compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; +}; diff --git a/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m.dts b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m.dts index 96f2fb080a..25ae255de0 100644 --- a/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m.dts +++ b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m.dts @@ -1,13 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the HiHope RZ/G2M main board + * Device Tree Source for the HiHope RZ/G2M Rev.3.0/4.0 main board * - * Copyright (C) 2019 Renesas Electronics Corp. + * Copyright (C) 2020 Renesas Electronics Corp. */ /dts-v1/; #include "r8a774a1.dtsi" -#include "hihope-common.dtsi" +#include "hihope-rev4.dtsi" / { model = "HopeRun HiHope RZ/G2M main board based on r8a774a1"; diff --git a/dts/src/arm64/renesas/r8a774a1.dtsi b/dts/src/arm64/renesas/r8a774a1.dtsi index a603d94797..8e80f50132 100644 --- a/dts/src/arm64/renesas/r8a774a1.dtsi +++ b/dts/src/arm64/renesas/r8a774a1.dtsi @@ -10,6 +10,8 @@ #include <dt-bindings/clock/r8a774a1-cpg-mssr.h> #include <dt-bindings/power/r8a774a1-sysc.h> +#define CPG_AUDIO_CLK_I R8A774A1_CLK_S0D4 + / { compatible = "renesas,r8a774a1"; #address-cells = <2>; @@ -2250,7 +2252,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a774a1", "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; @@ -2262,7 +2264,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a774a1", "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; @@ -2274,7 +2276,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a774a1", "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; @@ -2286,7 +2288,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a774a1", "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; diff --git a/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts b/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts new file mode 100644 index 0000000000..4b5154f029 --- /dev/null +++ b/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n-ex-idk-1110wr.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N Rev.3.0/4.0 with sub board connected + * to an Advantech IDK-1110WR 10.1" LVDS panel + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include "r8a774b1-hihope-rzg2n-ex.dts" +#include "hihope-rzg2-ex-lvds.dtsi" +#include "rzg2-advantech-idk-1110wr-panel.dtsi" + +&lvds0 { + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n-ex.dts b/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n-ex.dts index ab47c0bd9c..a3edd55113 100644 --- a/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n-ex.dts +++ b/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n-ex.dts @@ -1,8 +1,9 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the HiHope RZ/G2N sub board + * Device Tree Source for the HiHope RZ/G2N Rev.3.0/4.0 connected to + * sub board * - * Copyright (C) 2019 Renesas Electronics Corp. + * Copyright (C) 2020 Renesas Electronics Corp. */ #include "r8a774b1-hihope-rzg2n.dts" diff --git a/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts b/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts new file mode 100644 index 0000000000..e730b3b25d --- /dev/null +++ b/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N Rev.2.0 with sub board connected + * to an Advantech IDK-1110WR 10.1" LVDS panel + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include "r8a774b1-hihope-rzg2n-rev2-ex.dts" +#include "hihope-rzg2-ex-lvds.dtsi" +#include "rzg2-advantech-idk-1110wr-panel.dtsi" + +&lvds0 { + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts b/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts new file mode 100644 index 0000000000..2e5e1de040 --- /dev/null +++ b/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n-rev2-ex.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N Rev.2.0 connected to sub board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include "r8a774b1-hihope-rzg2n-rev2.dts" +#include "hihope-rzg2-ex.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2N (Rev.2.0) with sub board"; + compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2n", + "renesas,r8a774b1"; +}; diff --git a/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n-rev2.dts b/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n-rev2.dts new file mode 100644 index 0000000000..c69ca5cf6f --- /dev/null +++ b/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n-rev2.dts @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2N Rev.2.0 main board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774b1.dtsi" +#include "hihope-rev2.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2N main board (Rev.2.0) based on r8a774b1"; + compatible = "hoperun,hihope-rzg2n", "renesas,r8a774b1"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@480000000 { + device_type = "memory"; + reg = <0x4 0x80000000 0x0 0x80000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 721>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.3", + "dclkin.0", "dclkin.1", "dclkin.3"; +}; + +&sdhi3 { + mmc-hs400-1_8v; +}; diff --git a/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n.dts b/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n.dts index 9910c1aa0a..f1883cbd1a 100644 --- a/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n.dts +++ b/dts/src/arm64/renesas/r8a774b1-hihope-rzg2n.dts @@ -1,13 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the HiHope RZ/G2N main board + * Device Tree Source for the HiHope RZ/G2N main board Rev.3.0/4.0 * - * Copyright (C) 2019 Renesas Electronics Corp. + * Copyright (C) 2020 Renesas Electronics Corp. */ /dts-v1/; #include "r8a774b1.dtsi" -#include "hihope-common.dtsi" +#include "hihope-rev4.dtsi" / { model = "HopeRun HiHope RZ/G2N main board based on r8a774b1"; diff --git a/dts/src/arm64/renesas/r8a774b1.dtsi b/dts/src/arm64/renesas/r8a774b1.dtsi index 1e51855c7c..49e5addcfd 100644 --- a/dts/src/arm64/renesas/r8a774b1.dtsi +++ b/dts/src/arm64/renesas/r8a774b1.dtsi @@ -10,6 +10,8 @@ #include <dt-bindings/clock/r8a774b1-cpg-mssr.h> #include <dt-bindings/power/r8a774b1-sysc.h> +#define CPG_AUDIO_CLK_I R8A774B1_CLK_S0D4 + / { compatible = "renesas,r8a774b1"; #address-cells = <2>; @@ -2108,7 +2110,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a774b1", "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; @@ -2120,7 +2122,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a774b1", "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; @@ -2132,7 +2134,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a774b1", "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; @@ -2144,7 +2146,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a774b1", "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; diff --git a/dts/src/arm64/renesas/r8a774c0.dtsi b/dts/src/arm64/renesas/r8a774c0.dtsi index 5c72a7efbb..42171190cc 100644 --- a/dts/src/arm64/renesas/r8a774c0.dtsi +++ b/dts/src/arm64/renesas/r8a774c0.dtsi @@ -1618,7 +1618,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a774c0", "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; @@ -1630,7 +1630,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a774c0", "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; @@ -1642,7 +1642,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a774c0", "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; diff --git a/dts/src/arm64/renesas/r8a774e1-hihope-rzg2h-ex.dts b/dts/src/arm64/renesas/r8a774e1-hihope-rzg2h-ex.dts new file mode 100644 index 0000000000..265355e0de --- /dev/null +++ b/dts/src/arm64/renesas/r8a774e1-hihope-rzg2h-ex.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2H sub board + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include "r8a774e1-hihope-rzg2h.dts" +#include "hihope-rzg2-ex.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2H with sub board"; + compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2h", + "renesas,r8a774e1"; +}; diff --git a/dts/src/arm64/renesas/r8a774e1-hihope-rzg2h.dts b/dts/src/arm64/renesas/r8a774e1-hihope-rzg2h.dts new file mode 100644 index 0000000000..cdbe527e93 --- /dev/null +++ b/dts/src/arm64/renesas/r8a774e1-hihope-rzg2h.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2H main board + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774e1.dtsi" +#include "hihope-rev4.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2H main board based on r8a774e1"; + compatible = "hoperun,hihope-rzg2h", "renesas,r8a774e1"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x80000000>; + }; +}; diff --git a/dts/src/arm64/renesas/r8a774e1.dtsi b/dts/src/arm64/renesas/r8a774e1.dtsi new file mode 100644 index 0000000000..0f86cfd524 --- /dev/null +++ b/dts/src/arm64/renesas/r8a774e1.dtsi @@ -0,0 +1,1664 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the r8a774e1 SoC + * + * Copyright (C) 2020 Renesas Electronics Corp. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r8a774e1-cpg-mssr.h> +#include <dt-bindings/power/r8a774e1-sysc.h> + +#define CPG_AUDIO_CLK_I R8A774E1_CLK_S0D4 + +/ { + compatible = "renesas,r8a774e1"; + #address-cells = <2>; + #size-cells = <2>; + + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock - to be overridden by boards that provide it */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + opp-suspend; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&a57_0>; + }; + core1 { + cpu = <&a57_1>; + }; + core2 { + cpu = <&a57_2>; + }; + core3 { + cpu = <&a57_3>; + }; + }; + + cluster1 { + core0 { + cpu = <&a53_0>; + }; + core1 { + cpu = <&a53_1>; + }; + core2 { + cpu = <&a53_2>; + }; + core3 { + cpu = <&a53_3>; + }; + }; + }; + + a57_0: cpu@0 { + compatible = "arm,cortex-a57"; + reg = <0x0>; + device_type = "cpu"; + power-domains = <&sysc R8A774E1_PD_CA57_CPU0>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + dynamic-power-coefficient = <854>; + clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + }; + + a57_1: cpu@1 { + compatible = "arm,cortex-a57"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc R8A774E1_PD_CA57_CPU1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + }; + + a57_2: cpu@2 { + compatible = "arm,cortex-a57"; + reg = <0x2>; + device_type = "cpu"; + power-domains = <&sysc R8A774E1_PD_CA57_CPU2>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + }; + + a57_3: cpu@3 { + compatible = "arm,cortex-a57"; + reg = <0x3>; + device_type = "cpu"; + power-domains = <&sysc R8A774E1_PD_CA57_CPU3>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A774E1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; + }; + + a53_0: cpu@100 { + compatible = "arm,cortex-a53"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc R8A774E1_PD_CA53_CPU0>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <277>; + clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + a53_1: cpu@101 { + compatible = "arm,cortex-a53"; + reg = <0x101>; + device_type = "cpu"; + power-domains = <&sysc R8A774E1_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + a53_2: cpu@102 { + compatible = "arm,cortex-a53"; + reg = <0x102>; + device_type = "cpu"; + power-domains = <&sysc R8A774E1_PD_CA53_CPU2>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + a53_3: cpu@103 { + compatible = "arm,cortex-a53"; + reg = <0x103>; + device_type = "cpu"; + power-domains = <&sysc R8A774E1_PD_CA53_CPU3>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + clocks = <&cpg CPG_CORE R8A774E1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <535>; + }; + + L2_CA57: cache-controller-0 { + compatible = "cache"; + power-domains = <&sysc R8A774E1_PD_CA57_SCU>; + cache-unified; + cache-level = <2>; + }; + + L2_CA53: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc R8A774E1_PD_CA53_SCU>; + cache-unified; + cache-level = <2>; + }; + }; + + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + extalr_clk: extalr { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts-extended = <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, <&a53_1>, <&a53_2>, <&a53_3>; + }; + + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, <&a57_1>, <&a57_2>, <&a57_3>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + /* External SCIF clock - to be overridden by boards that provide it */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rwdt: watchdog@e6020000 { + compatible = "renesas,r8a774e1-wdt", + "renesas,rcar-gen3-wdt"; + reg = <0 0xe6020000 0 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 402>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 402>; + status = "disabled"; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a774e1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a774e1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 29>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a774e1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 15>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a774e1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 16>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a774e1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 18>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a774e1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a774e1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 906>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 906>; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a774e1", + "renesas,rcar-gen3-gpio"; + reg = <0 0xe6055800 0 0x50>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 4>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 905>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 905>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a774e1"; + reg = <0 0xe6060000 0 0x50c>; + }; + + cmt0: timer@e60f0000 { + compatible = "renesas,r8a774e1-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a774e1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a774e1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a774e1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a774e1-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&extalr_clk>; + clock-names = "extal", "extalr"; + #clock-cells = <2>; + #power-domain-cells = <0>; + #reset-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a774e1-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a774e1-sysc"; + reg = <0 0xe6180000 0 0x0400>; + #power-domain-cells = <1>; + }; + + tsc: thermal@e6198000 { + compatible = "renesas,r8a774e1-thermal"; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>, + <0 0xe61a8000 0 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; + }; + + intc_ex: interrupt-controller@e61c0000 { + compatible = "renesas,intc-ex-r8a774e1", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 407>; + }; + + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a774e1", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a774e1", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a774e1", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a774e1", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a774e1", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774e1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 931>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774e1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 930>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774e1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 929>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774e1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 928>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774e1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 927>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774e1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 919>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a774e1", + "renesas,rcar-gen3-i2c"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 918>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a774e1", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 926>; + dmas = <&dmac0 0x11>, <&dmac0 0x10>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a774e1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a774e1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a774e1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a774e1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a774e1", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + hsusb: usb@e6590000 { + reg = <0 0xe6590000 0 0x200>; + status = "disabled"; + + /* placeholder */ + }; + + usb3_phy0: usb-phy@e65ee000 { + reg = <0 0xe65ee000 0 0x90>; + #phy-cells = <0>; + status = "disabled"; + + /* placeholder */ + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a774e1", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 219>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a774e1", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 218>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a774e1", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 217>; + #dma-cells = <1>; + dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; + }; + + ipmmu_ds0: iommu@e6740000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: iommu@e7740000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: iommu@e6570000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mm: iommu@e67b0000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mp0: iommu@ec670000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: iommu@fd800000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv1: iommu@fd950000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfd950000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 7>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv2: iommu@fd960000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfd960000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 8>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv3: iommu@fd970000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfd970000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 9>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: iommu@fe6b0000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 12>; + power-domains = <&sysc R8A774E1_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vc1: iommu@fe6f0000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfe6f0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 13>; + power-domains = <&sysc R8A774E1_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: iommu@febd0000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 14>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vi1: iommu@febe0000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfebe0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 15>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vp0: iommu@fe990000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfe990000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 16>; + power-domains = <&sysc R8A774E1_PD_A3VP>; + #iommu-cells = <1>; + }; + + ipmmu_vp1: iommu@fe980000 { + compatible = "renesas,ipmmu-r8a774e1"; + reg = <0 0xfe980000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 17>; + power-domains = <&sysc R8A774E1_PD_A3VP>; + #iommu-cells = <1>; + }; + + avb: ethernet@e6800000 { + compatible = "renesas,etheravb-r8a774e1", + "renesas,etheravb-rcar-gen3"; + reg = <0 0xe6800000 0 0x800>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15", + "ch16", "ch17", "ch18", "ch19", + "ch20", "ch21", "ch22", "ch23", + "ch24"; + clocks = <&cpg CPG_MOD 812>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 812>; + phy-mode = "rgmii"; + iommus = <&ipmmu_ds0 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + can0: can@e6c30000 { + compatible = "renesas,can-r8a774e1", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c30000 0 0x1000>; + interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 916>, + <&cpg CPG_CORE R8A774E1_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 916>; + status = "disabled"; + }; + + can1: can@e6c38000 { + compatible = "renesas,can-r8a774e1", + "renesas,rcar-gen3-can"; + reg = <0 0xe6c38000 0 0x1000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 915>, + <&cpg CPG_CORE R8A774E1_CLK_CANFD>, + <&can_clk>; + clock-names = "clkp1", "clkp2", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 915>; + status = "disabled"; + }; + + canfd: can@e66c0000 { + compatible = "renesas,r8a774e1-canfd", + "renesas,rcar-gen3-canfd"; + reg = <0 0xe66c0000 0 0x8000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 914>, + <&cpg CPG_CORE R8A774E1_CLK_CANFD>, + <&can_clk>; + clock-names = "fck", "canfd", "can_clk"; + assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>; + assigned-clock-rates = <40000000>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 914>; + status = "disabled"; + + channel0 { + status = "disabled"; + }; + + channel1 { + status = "disabled"; + }; + }; + + pwm0: pwm@e6e30000 { + reg = <0 0xe6e30000 0 0x8>; + #pwm-cells = <2>; + status = "disabled"; + + /* placeholder */ + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a774e1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a774e1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + + scif2: serial@e6e88000 { + compatible = "renesas,scif-r8a774e1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e88000 0 0x40>; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 310>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x13>, <&dmac1 0x12>, + <&dmac2 0x13>, <&dmac2 0x12>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a774e1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a774e1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a774e1", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 0x40>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A774E1_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + msiof0: spi@e6e90000 { + compatible = "renesas,msiof-r8a774e1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6e90000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 211>; + dmas = <&dmac1 0x41>, <&dmac1 0x40>, + <&dmac2 0x41>, <&dmac2 0x40>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 211>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6ea0000 { + compatible = "renesas,msiof-r8a774e1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6ea0000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 210>; + dmas = <&dmac1 0x43>, <&dmac1 0x42>, + <&dmac2 0x43>, <&dmac2 0x42>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 210>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof2: spi@e6c00000 { + compatible = "renesas,msiof-r8a774e1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c00000 0 0x0064>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 209>; + dmas = <&dmac0 0x45>, <&dmac0 0x44>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 209>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof3: spi@e6c10000 { + compatible = "renesas,msiof-r8a774e1", + "renesas,rcar-gen3-msiof"; + reg = <0 0xe6c10000 0 0x0064>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 208>; + dmas = <&dmac0 0x47>, <&dmac0 0x46>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 208>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + rcar_sound: sound@ec500000 { + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x280>, /* SSI */ + <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/ + reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; + + status = "disabled"; + + /* placeholder */ + + rcar_sound,ssi { + ssi2: ssi-2 { + /* placeholder */ + }; + }; + }; + + xhci0: usb@ee000000 { + reg = <0 0xee000000 0 0xc00>; + status = "disabled"; + + /* placeholder */ + }; + + usb3_peri0: usb@ee020000 { + reg = <0 0xee020000 0 0x400>; + status = "disabled"; + + /* placeholder */ + }; + + ohci0: usb@ee080000 { + reg = <0 0xee080000 0 0x100>; + status = "disabled"; + + /* placeholder */ + }; + + ohci1: usb@ee0a0000 { + reg = <0 0xee0a0000 0 0x100>; + status = "disabled"; + + /* placeholder */ + }; + + ehci0: usb@ee080100 { + reg = <0 0xee080100 0 0x100>; + status = "disabled"; + + /* placeholder */ + }; + + ehci1: usb@ee0a0100 { + reg = <0 0xee0a0100 0 0x100>; + status = "disabled"; + + /* placeholder */ + }; + + usb2_phy0: usb-phy@ee080200 { + reg = <0 0xee080200 0 0x700>; + status = "disabled"; + + /* placeholder */ + }; + + usb2_phy1: usb-phy@ee0a0200 { + reg = <0 0xee0a0200 0 0x700>; + status = "disabled"; + + /* placeholder */ + }; + + sdhi0: mmc@ee100000 { + compatible = "renesas,sdhi-r8a774e1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee100000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 314>; + iommus = <&ipmmu_ds1 32>; + status = "disabled"; + }; + + sdhi1: mmc@ee120000 { + compatible = "renesas,sdhi-r8a774e1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 313>; + iommus = <&ipmmu_ds1 33>; + status = "disabled"; + }; + + sdhi2: mmc@ee140000 { + compatible = "renesas,sdhi-r8a774e1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 312>; + iommus = <&ipmmu_ds1 34>; + status = "disabled"; + }; + + sdhi3: mmc@ee160000 { + compatible = "renesas,sdhi-r8a774e1", + "renesas,rcar-gen3-sdhi"; + reg = <0 0xee160000 0 0x2000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 311>; + iommus = <&ipmmu_ds1 35>; + status = "disabled"; + }; + + gic: interrupt-controller@f1010000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xf1010000 0 0x1000>, + <0x0 0xf1020000 0 0x20000>, + <0x0 0xf1040000 0 0x20000>, + <0x0 0xf1060000 0 0x20000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&cpg CPG_MOD 408>; + clock-names = "clk"; + power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>; + resets = <&cpg 408>; + }; + + pciec0: pcie@fe000000 { + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + status = "disabled"; + + /* placeholder */ + }; + + hdmi0: hdmi@fead0000 { + reg = <0 0xfead0000 0 0x10000>; + status = "disabled"; + + /* placeholder */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + port@2 { + reg = <2>; + }; + }; + }; + + du: display@feb00000 { + reg = <0 0xfeb00000 0 0x80000>; + status = "disabled"; + + /* placeholder */ + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + port@2 { + reg = <2>; + }; + }; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + sustainable-power = <6313>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + sustainable-power = <6313>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + sustainable-power = <6313>; + + trips { + target: trip-point1 { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 0 2>; + contribution = <1024>; + }; + + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; +}; diff --git a/dts/src/arm64/renesas/r8a77951.dtsi b/dts/src/arm64/renesas/r8a77951.dtsi index 61d67d9714..9beb8e76d9 100644 --- a/dts/src/arm64/renesas/r8a77951.dtsi +++ b/dts/src/arm64/renesas/r8a77951.dtsi @@ -2590,7 +2590,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a7795", "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; @@ -2603,7 +2603,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a7795", "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; @@ -2616,7 +2616,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a7795", "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; @@ -2629,7 +2629,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a7795", "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; diff --git a/dts/src/arm64/renesas/r8a77960.dtsi b/dts/src/arm64/renesas/r8a77960.dtsi index 33bf62acff..4dfb7f0767 100644 --- a/dts/src/arm64/renesas/r8a77960.dtsi +++ b/dts/src/arm64/renesas/r8a77960.dtsi @@ -2394,7 +2394,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a7796", "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; @@ -2407,7 +2407,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a7796", "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; @@ -2420,7 +2420,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a7796", "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; @@ -2433,7 +2433,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a7796", "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; diff --git a/dts/src/arm64/renesas/r8a77961.dtsi b/dts/src/arm64/renesas/r8a77961.dtsi index 760e738b75..542c44c7db 100644 --- a/dts/src/arm64/renesas/r8a77961.dtsi +++ b/dts/src/arm64/renesas/r8a77961.dtsi @@ -883,6 +883,95 @@ dma-channels = <16>; }; + ipmmu_ds0: iommu@e6740000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xe6740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 0>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ds1: iommu@e7740000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xe7740000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 1>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_hc: iommu@e6570000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xe6570000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 2>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_ir: iommu@ff8b0000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xff8b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 3>; + power-domains = <&sysc R8A77961_PD_A3IR>; + #iommu-cells = <1>; + }; + + ipmmu_mm: iommu@e67b0000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xe67b0000 0 0x1000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_mp: iommu@ec670000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xec670000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 4>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv0: iommu@fd800000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xfd800000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 5>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_pv1: iommu@fd950000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xfd950000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 6>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_rt: iommu@ffc80000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xffc80000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 7>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + + ipmmu_vc0: iommu@fe6b0000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xfe6b0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 8>; + power-domains = <&sysc R8A77961_PD_A3VC>; + #iommu-cells = <1>; + }; + + ipmmu_vi0: iommu@febd0000 { + compatible = "renesas,ipmmu-r8a77961"; + reg = <0 0xfebd0000 0 0x1000>; + renesas,ipmmu-main = <&ipmmu_mm 9>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + #iommu-cells = <1>; + }; + avb: ethernet@e6800000 { compatible = "renesas,etheravb-r8a77961", "renesas,etheravb-rcar-gen3"; @@ -1257,7 +1346,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a77961", "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; @@ -1269,7 +1358,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a77961", "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; @@ -1281,7 +1370,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a77961", "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; @@ -1293,7 +1382,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a77961", "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; diff --git a/dts/src/arm64/renesas/r8a77965.dtsi b/dts/src/arm64/renesas/r8a77965.dtsi index 6f7ab39fd2..fe4dc12e2b 100644 --- a/dts/src/arm64/renesas/r8a77965.dtsi +++ b/dts/src/arm64/renesas/r8a77965.dtsi @@ -2120,7 +2120,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; @@ -2133,7 +2133,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; @@ -2146,7 +2146,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; @@ -2159,7 +2159,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a77965", "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; diff --git a/dts/src/arm64/renesas/r8a77970-eagle.dts b/dts/src/arm64/renesas/r8a77970-eagle.dts index ac2156ab3e..5c28f303e9 100644 --- a/dts/src/arm64/renesas/r8a77970-eagle.dts +++ b/dts/src/arm64/renesas/r8a77970-eagle.dts @@ -187,12 +187,79 @@ function = "i2c0"; }; + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; }; }; +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + cr7@40000 { + reg = <0x00040000 0x080000>; + read-only; + }; + cert_header_sa3@c0000 { + reg = <0x000c0000 0x080000>; + read-only; + }; + bl2@140000 { + reg = <0x00140000 0x040000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x460000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x0c0000>; + read-only; + }; + uboot-env@700000 { + reg = <0x00700000 0x040000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/dts/src/arm64/renesas/r8a77970-v3msk.dts b/dts/src/arm64/renesas/r8a77970-v3msk.dts index 01c4ba0f7b..668a1ece9a 100644 --- a/dts/src/arm64/renesas/r8a77970-v3msk.dts +++ b/dts/src/arm64/renesas/r8a77970-v3msk.dts @@ -212,12 +212,79 @@ power-source = <3300>; }; + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; }; }; +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + cr7@40000 { + reg = <0x00040000 0x080000>; + read-only; + }; + cert_header_sa3@c0000 { + reg = <0x000c0000 0x080000>; + read-only; + }; + bl2@140000 { + reg = <0x00140000 0x040000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x460000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x0c0000>; + read-only; + }; + uboot-env@700000 { + reg = <0x00700000 0x040000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + &scif0 { pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm64/renesas/r8a77970.dtsi b/dts/src/arm64/renesas/r8a77970.dtsi index bd95ecb1b4..2b9124a5ca 100644 --- a/dts/src/arm64/renesas/r8a77970.dtsi +++ b/dts/src/arm64/renesas/r8a77970.dtsi @@ -1039,6 +1039,23 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a77970-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x4000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + clock-names = "rpc"; + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; diff --git a/dts/src/arm64/renesas/r8a77980-condor.dts b/dts/src/arm64/renesas/r8a77980-condor.dts index ef8350a062..422ec53740 100644 --- a/dts/src/arm64/renesas/r8a77980-condor.dts +++ b/dts/src/arm64/renesas/r8a77980-condor.dts @@ -262,6 +262,11 @@ power-source = <1800>; }; + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; @@ -273,6 +278,68 @@ }; }; +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + cr7@40000 { + reg = <0x00040000 0x080000>; + read-only; + }; + cert_header_sa3@c0000 { + reg = <0x000c0000 0x080000>; + read-only; + }; + bl2@140000 { + reg = <0x00140000 0x040000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x460000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x0c0000>; + read-only; + }; + uboot-env@700000 { + reg = <0x00700000 0x040000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/dts/src/arm64/renesas/r8a77980-v3hsk.dts b/dts/src/arm64/renesas/r8a77980-v3hsk.dts index 6dff046932..7838dcee31 100644 --- a/dts/src/arm64/renesas/r8a77980-v3hsk.dts +++ b/dts/src/arm64/renesas/r8a77980-v3hsk.dts @@ -187,6 +187,11 @@ function = "i2c0"; }; + qspi0_pins: qspi0 { + groups = "qspi0_ctrl", "qspi0_data4"; + function = "qspi0"; + }; + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; @@ -198,6 +203,68 @@ }; }; +&rpc { + pinctrl-0 = <&qspi0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + compatible = "spansion,s25fs512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + bootparam@0 { + reg = <0x00000000 0x040000>; + read-only; + }; + cr7@40000 { + reg = <0x00040000 0x080000>; + read-only; + }; + cert_header_sa3@c0000 { + reg = <0x000c0000 0x080000>; + read-only; + }; + bl2@140000 { + reg = <0x00140000 0x040000>; + read-only; + }; + cert_header_sa6@180000 { + reg = <0x00180000 0x040000>; + read-only; + }; + bl31@1c0000 { + reg = <0x001c0000 0x460000>; + read-only; + }; + uboot@640000 { + reg = <0x00640000 0x0c0000>; + read-only; + }; + uboot-env@700000 { + reg = <0x00700000 0x040000>; + read-only; + }; + dtb@740000 { + reg = <0x00740000 0x080000>; + }; + kernel@7c0000 { + reg = <0x007c0000 0x1400000>; + }; + user@1bc0000 { + reg = <0x01bc0000 0x2440000>; + }; + }; + }; +}; + &rwdt { timeout-sec = <60>; status = "okay"; diff --git a/dts/src/arm64/renesas/r8a77980.dtsi b/dts/src/arm64/renesas/r8a77980.dtsi index 387e6d99f2..59f5bbd721 100644 --- a/dts/src/arm64/renesas/r8a77980.dtsi +++ b/dts/src/arm64/renesas/r8a77980.dtsi @@ -1344,6 +1344,23 @@ status = "disabled"; }; + rpc: spi@ee200000 { + compatible = "renesas,r8a77980-rpc-if", + "renesas,rcar-gen3-rpc-if"; + reg = <0 0xee200000 0 0x200>, + <0 0x08000000 0 0x4000000>, + <0 0xee208000 0 0x100>; + reg-names = "regs", "dirmap", "wbuf"; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 917>; + clock-names = "rpc"; + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>; + resets = <&cpg 917>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@f1010000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; diff --git a/dts/src/arm64/renesas/r8a77990-ebisu.dts b/dts/src/arm64/renesas/r8a77990-ebisu.dts index dc24cec46a..7402cfa8d4 100644 --- a/dts/src/arm64/renesas/r8a77990-ebisu.dts +++ b/dts/src/arm64/renesas/r8a77990-ebisu.dts @@ -715,6 +715,7 @@ mmc-hs400-1_8v; bus-width = <8>; non-removable; + full-pwr-cycle-in-suspend; status = "okay"; }; diff --git a/dts/src/arm64/renesas/r8a77990.dtsi b/dts/src/arm64/renesas/r8a77990.dtsi index cd11f24744..1991bdc367 100644 --- a/dts/src/arm64/renesas/r8a77990.dtsi +++ b/dts/src/arm64/renesas/r8a77990.dtsi @@ -1595,7 +1595,7 @@ status = "disabled"; }; - sdhi0: sd@ee100000 { + sdhi0: mmc@ee100000 { compatible = "renesas,sdhi-r8a77990", "renesas,rcar-gen3-sdhi"; reg = <0 0xee100000 0 0x2000>; @@ -1608,7 +1608,7 @@ status = "disabled"; }; - sdhi1: sd@ee120000 { + sdhi1: mmc@ee120000 { compatible = "renesas,sdhi-r8a77990", "renesas,rcar-gen3-sdhi"; reg = <0 0xee120000 0 0x2000>; @@ -1621,7 +1621,7 @@ status = "disabled"; }; - sdhi3: sd@ee160000 { + sdhi3: mmc@ee160000 { compatible = "renesas,sdhi-r8a77990", "renesas,rcar-gen3-sdhi"; reg = <0 0xee160000 0 0x2000>; diff --git a/dts/src/arm64/renesas/r8a77995.dtsi b/dts/src/arm64/renesas/r8a77995.dtsi index e5617ec0f4..2c2272f5f5 100644 --- a/dts/src/arm64/renesas/r8a77995.dtsi +++ b/dts/src/arm64/renesas/r8a77995.dtsi @@ -916,7 +916,7 @@ status = "disabled"; }; - sdhi2: sd@ee140000 { + sdhi2: mmc@ee140000 { compatible = "renesas,sdhi-r8a77995", "renesas,rcar-gen3-sdhi"; reg = <0 0xee140000 0 0x2000>; diff --git a/dts/src/arm64/renesas/salvator-common.dtsi b/dts/src/arm64/renesas/salvator-common.dtsi index 98bbcafc8c..1bf77957d2 100644 --- a/dts/src/arm64/renesas/salvator-common.dtsi +++ b/dts/src/arm64/renesas/salvator-common.dtsi @@ -833,6 +833,7 @@ mmc-hs400-1_8v; non-removable; fixed-emmc-driver-type = <1>; + full-pwr-cycle-in-suspend; status = "okay"; }; diff --git a/dts/src/arm64/rockchip/px30-evb.dts b/dts/src/arm64/rockchip/px30-evb.dts index 0a680257d9..5fe905fae9 100644 --- a/dts/src/arm64/rockchip/px30-evb.dts +++ b/dts/src/arm64/rockchip/px30-evb.dts @@ -145,7 +145,6 @@ }; &emmc { - bus-width = <8>; cap-mmc-highspeed; mmc-hs200-1_8v; non-removable; @@ -499,7 +498,6 @@ }; &sdmmc { - bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; card-detect-delay = <800>; @@ -513,7 +511,6 @@ }; &sdio { - bus-width = <4>; cap-sd-highspeed; keep-power-in-suspend; non-removable; diff --git a/dts/src/arm64/rockchip/px30.dtsi b/dts/src/arm64/rockchip/px30.dtsi index a6b8427156..2695ea8cda 100644 --- a/dts/src/arm64/rockchip/px30.dtsi +++ b/dts/src/arm64/rockchip/px30.dtsi @@ -714,6 +714,7 @@ reg = <0x0 0xff240000 0x0 0x4000>; interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -733,9 +734,9 @@ rockchip,grf = <&grf>; rockchip,hw-tshut-temp = <120000>; pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&tsadc_otp_gpio>; + pinctrl-0 = <&tsadc_otp_pin>; pinctrl-1 = <&tsadc_otp_out>; - pinctrl-2 = <&tsadc_otp_gpio>; + pinctrl-2 = <&tsadc_otp_pin>; #thermal-sensor-cells = <1>; status = "disabled"; }; @@ -1373,7 +1374,7 @@ }; tsadc { - tsadc_otp_gpio: tsadc-otp-gpio { + tsadc_otp_pin: tsadc-otp-pin { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/dts/src/arm64/rockchip/rk3308.dtsi b/dts/src/arm64/rockchip/rk3308.dtsi index ac7f694079..e8b754d415 100644 --- a/dts/src/arm64/rockchip/rk3308.dtsi +++ b/dts/src/arm64/rockchip/rk3308.dtsi @@ -524,6 +524,7 @@ reg = <0x0 0xff2c0000 0x0 0x4000>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -534,6 +535,7 @@ reg = <0x0 0xff2d0000 0x0 0x4000>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -1629,7 +1631,7 @@ }; tsadc { - tsadc_otp_gpio: tsadc-otp-gpio { + tsadc_otp_pin: tsadc-otp-pin { rockchip,pins = <0 RK_PB2 0 &pcfg_pull_none>; }; @@ -1657,7 +1659,7 @@ <2 RK_PA3 1 &pcfg_pull_none>; }; - uart0_rts_gpio: uart0-rts-gpio { + uart0_rts_pin: uart0-rts-pin { rockchip,pins = <2 RK_PA3 0 &pcfg_pull_none>; }; @@ -1730,7 +1732,7 @@ <4 RK_PA7 1 &pcfg_pull_none>; }; - uart4_rts_gpio: uart4-rts-gpio { + uart4_rts_pin: uart4-rts-pin { rockchip,pins = <4 RK_PA7 0 &pcfg_pull_none>; }; diff --git a/dts/src/arm64/rockchip/rk3326-odroid-go2.dts b/dts/src/arm64/rockchip/rk3326-odroid-go2.dts index b3a8f93657..35bd6b904b 100644 --- a/dts/src/arm64/rockchip/rk3326-odroid-go2.dts +++ b/dts/src/arm64/rockchip/rk3326-odroid-go2.dts @@ -445,7 +445,6 @@ }; &sdmmc { - bus-width = <4>; cap-sd-highspeed; card-detect-delay = <200>; cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/ diff --git a/dts/src/arm64/rockchip/rk3328-evb.dts b/dts/src/arm64/rockchip/rk3328-evb.dts index ac29c2744d..1969dab841 100644 --- a/dts/src/arm64/rockchip/rk3328-evb.dts +++ b/dts/src/arm64/rockchip/rk3328-evb.dts @@ -41,7 +41,7 @@ compatible = "regulator-fixed"; gpio = <&gpio0 30 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0m1_gpio>; + pinctrl-0 = <&sdmmc0m1_pin>; regulator-name = "vcc_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/dts/src/arm64/rockchip/rk3328-roc-cc.dts b/dts/src/arm64/rockchip/rk3328-roc-cc.dts index 34db48c274..b70ffb1c6a 100644 --- a/dts/src/arm64/rockchip/rk3328-roc-cc.dts +++ b/dts/src/arm64/rockchip/rk3328-roc-cc.dts @@ -34,7 +34,7 @@ compatible = "regulator-fixed"; gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0m1_gpio>; + pinctrl-0 = <&sdmmc0m1_pin>; regulator-boot-on; regulator-name = "vcc_sd"; regulator-min-microvolt = <3300000>; diff --git a/dts/src/arm64/rockchip/rk3328-rock64.dts b/dts/src/arm64/rockchip/rk3328-rock64.dts index 6e09c223ed..86cfb5c50a 100644 --- a/dts/src/arm64/rockchip/rk3328-rock64.dts +++ b/dts/src/arm64/rockchip/rk3328-rock64.dts @@ -25,7 +25,7 @@ compatible = "regulator-fixed"; gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0m1_gpio>; + pinctrl-0 = <&sdmmc0m1_pin>; regulator-name = "vcc_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/dts/src/arm64/rockchip/rk3328.dtsi b/dts/src/arm64/rockchip/rk3328.dtsi index d399883d4b..bbdb19a3e8 100644 --- a/dts/src/arm64/rockchip/rk3328.dtsi +++ b/dts/src/arm64/rockchip/rk3328.dtsi @@ -153,6 +153,7 @@ reg = <0x0 0xff1f0000 0x0 0x4000>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -552,9 +553,9 @@ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; clock-names = "tsadc", "apb_pclk"; pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&otp_gpio>; + pinctrl-0 = <&otp_pin>; pinctrl-1 = <&otp_out>; - pinctrl-2 = <&otp_gpio>; + pinctrl-2 = <&otp_pin>; resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; rockchip,grf = <&grf>; @@ -1154,7 +1155,7 @@ rockchip,pins = <0 RK_PA5 2 &pcfg_pull_none>, <0 RK_PA6 2 &pcfg_pull_none>; }; - i2c3_gpio: i2c3-gpio { + i2c3_pins: i2c3-pins { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>, <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; @@ -1225,7 +1226,7 @@ }; tsadc { - otp_gpio: otp-gpio { + otp_pin: otp-pin { rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; @@ -1248,7 +1249,7 @@ rockchip,pins = <1 RK_PB2 1 &pcfg_pull_none>; }; - uart0_rts_gpio: uart0-rts-gpio { + uart0_rts_pin: uart0-rts-pin { rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -1267,7 +1268,7 @@ rockchip,pins = <3 RK_PA5 4 &pcfg_pull_none>; }; - uart1_rts_gpio: uart1-rts-gpio { + uart1_rts_pin: uart1-rts-pin { rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -1493,7 +1494,7 @@ rockchip,pins = <2 RK_PA7 1 &pcfg_pull_up_4ma>; }; - sdmmc0m0_gpio: sdmmc0m0-gpio { + sdmmc0m0_pin: sdmmc0m0-pin { rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>; }; }; @@ -1503,7 +1504,7 @@ rockchip,pins = <0 RK_PD6 3 &pcfg_pull_up_4ma>; }; - sdmmc0m1_gpio: sdmmc0m1-gpio { + sdmmc0m1_pin: sdmmc0m1-pin { rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>; }; }; @@ -1536,7 +1537,7 @@ <1 RK_PA3 1 &pcfg_pull_up_8ma>; }; - sdmmc0_gpio: sdmmc0-gpio { + sdmmc0_pins: sdmmc0-pins { rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>, <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>, @@ -1578,7 +1579,7 @@ <3 RK_PA7 3 &pcfg_pull_up_4ma>; }; - sdmmc0ext_gpio: sdmmc0ext-gpio { + sdmmc0ext_pins: sdmmc0ext-pins { rockchip,pins = <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>, <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>, @@ -1623,7 +1624,7 @@ <1 RK_PC1 1 &pcfg_pull_up_8ma>; }; - sdmmc1_gpio: sdmmc1-gpio { + sdmmc1_pins: sdmmc1-pins { rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up_4ma>, <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up_4ma>, @@ -1817,7 +1818,7 @@ tsadc_int: tsadc-int { rockchip,pins = <2 RK_PB5 2 &pcfg_pull_none>; }; - tsadc_gpio: tsadc-gpio { + tsadc_pin: tsadc-pin { rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/dts/src/arm64/rockchip/rk3368-lion-haikou.dts b/dts/src/arm64/rockchip/rk3368-lion-haikou.dts index cbde279ae8..7fcb1eacea 100644 --- a/dts/src/arm64/rockchip/rk3368-lion-haikou.dts +++ b/dts/src/arm64/rockchip/rk3368-lion-haikou.dts @@ -25,9 +25,9 @@ }; leds { - pinctrl-0 = <&led_pins_module>, <&led_sd_haikou>; + pinctrl-0 = <&module_led_pins>, <&sd_card_led_pin>; - sd-card-led { + sd_card_led: led-3 { label = "sd_card_led"; gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; @@ -118,14 +118,14 @@ }; leds { - led_sd_haikou: led-sd-gpio { + sd_card_led_pin: sd-card-led-pin { rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdmmc { - sdmmc_cd_gpio: sdmmc-cd-gpio { + sdmmc_cd_pin: sdmmc-cd-pin { rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/dts/src/arm64/rockchip/rk3368-lion.dtsi b/dts/src/arm64/rockchip/rk3368-lion.dtsi index e17311e090..24d28be473 100644 --- a/dts/src/arm64/rockchip/rk3368-lion.dtsi +++ b/dts/src/arm64/rockchip/rk3368-lion.dtsi @@ -76,16 +76,16 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&led_pins_module>; + pinctrl-0 = <&module_led_pins>; - module_led1 { + module_led1: led-1 { label = "module_led1"; gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; panic-indicator; }; - module_led2 { + module_led2: led-2 { label = "module_led2"; gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>; default-state = "off"; @@ -156,7 +156,7 @@ pinctrl-0 = <&rgmii_pins>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; - snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; + snps,reset-gpio = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; tx_delay = <0x10>; rx_delay = <0x10>; status = "okay"; @@ -270,7 +270,7 @@ &pinctrl { leds { - led_pins_module: led-module-gpio { + module_led_pins: module-led-pins { rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>, <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/dts/src/arm64/rockchip/rk3368.dtsi b/dts/src/arm64/rockchip/rk3368.dtsi index 1ebb0eef42..3746f23dc3 100644 --- a/dts/src/arm64/rockchip/rk3368.dtsi +++ b/dts/src/arm64/rockchip/rk3368.dtsi @@ -149,6 +149,7 @@ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC_PERI>; clock-names = "apb_pclk"; }; @@ -160,6 +161,7 @@ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC_BUS>; clock-names = "apb_pclk"; }; @@ -483,9 +485,9 @@ resets = <&cru SRST_TSADC>; reset-names = "tsadc-apb"; pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&otp_gpio>; + pinctrl-0 = <&otp_pin>; pinctrl-1 = <&otp_out>; - pinctrl-2 = <&otp_gpio>; + pinctrl-2 = <&otp_pin>; #thermal-sensor-cells = <1>; rockchip,hw-tshut-temp = <95000>; status = "disabled"; @@ -1145,7 +1147,7 @@ }; tsadc { - otp_gpio: otp-gpio { + otp_pin: otp-pin { rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/dts/src/arm64/rockchip/rk3399-firefly.dts b/dts/src/arm64/rockchip/rk3399-firefly.dts index 20b5599f5e..6db18808b9 100644 --- a/dts/src/arm64/rockchip/rk3399-firefly.dts +++ b/dts/src/arm64/rockchip/rk3399-firefly.dts @@ -589,11 +589,11 @@ }; pmic { - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; diff --git a/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi b/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi index 4373ed732a..60cd1c18cd 100644 --- a/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi +++ b/dts/src/arm64/rockchip/rk3399-gru-scarlet.dtsi @@ -499,7 +499,7 @@ camera: &i2c7 { }; /* there is no external pull up, so need to set this pin pull up */ -&sdmmc_cd_gpio { +&sdmmc_cd_pin { rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>; }; diff --git a/dts/src/arm64/rockchip/rk3399-gru.dtsi b/dts/src/arm64/rockchip/rk3399-gru.dtsi index 2f39977400..32dcaf2100 100644 --- a/dts/src/arm64/rockchip/rk3399-gru.dtsi +++ b/dts/src/arm64/rockchip/rk3399-gru.dtsi @@ -516,7 +516,7 @@ ap_i2c_audio: &i2c8 { * configured as SDMMC and not JTAG. */ pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_gpio + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_pin &sdmmc_bus4>; bus-width = <4>; @@ -767,7 +767,7 @@ ap_i2c_audio: &i2c8 { }; /* This is where we actually hook up CD; has external pull */ - sdmmc_cd_gpio: sdmmc-cd-gpio { + sdmmc_cd_pin: sdmmc-cd-pin { rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts b/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts index bf87fa32d3..341d074ed9 100644 --- a/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts +++ b/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts @@ -205,7 +205,7 @@ compatible = "silergy,syr827"; reg = <0x40>; regulator-compatible = "fan53555-reg"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -223,7 +223,7 @@ compatible = "silergy,syr828"; reg = <0x41>; regulator-compatible = "fan53555-reg"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -521,12 +521,12 @@ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; diff --git a/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi b/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi index e87a044774..e36837c04d 100644 --- a/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi +++ b/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi @@ -141,15 +141,15 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&sys_led_gpio>, <&user_led_gpio>; + pinctrl-0 = <&sys_led_pin>, <&user_led_pin>; - sys-led { + sys_led: led-0 { label = "sys_led"; linux,default-trigger = "heartbeat"; gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; }; - user-led { + user_led: led-1 { label = "user_led"; default-state = "off"; gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>; @@ -586,11 +586,11 @@ }; leds { - sys_led_gpio: sys_led-gpio { + sys_led_pin: sys-led-pin { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; - user_led_gpio: user_led-gpio { + user_led_pin: user-led-pin { rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/dts/src/arm64/rockchip/rk3399-leez-p710.dts b/dts/src/arm64/rockchip/rk3399-leez-p710.dts index 73be38a537..1fa80ac154 100644 --- a/dts/src/arm64/rockchip/rk3399-leez-p710.dts +++ b/dts/src/arm64/rockchip/rk3399-leez-p710.dts @@ -341,7 +341,7 @@ reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -360,7 +360,7 @@ reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -447,11 +447,11 @@ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; diff --git a/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi b/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi index 1d246c2caa..76a8b40a93 100644 --- a/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi +++ b/dts/src/arm64/rockchip/rk3399-nanopi4.dtsi @@ -117,9 +117,9 @@ leds: gpio-leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&leds_gpio>; + pinctrl-0 = <&status_led_pin>; - status { + status_led: led-0 { gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; label = "status_led"; linux,default-trigger = "heartbeat"; @@ -520,7 +520,7 @@ }; gpio-leds { - leds_gpio: leds-gpio { + status_led_pin: status-led-pin { rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; }; diff --git a/dts/src/arm64/rockchip/rk3399-pinebook-pro.dts b/dts/src/arm64/rockchip/rk3399-pinebook-pro.dts index cb0245d222..06d48338c8 100644 --- a/dts/src/arm64/rockchip/rk3399-pinebook-pro.dts +++ b/dts/src/arm64/rockchip/rk3399-pinebook-pro.dts @@ -28,12 +28,19 @@ pwms = <&pwm0 0 740740 0>; }; + bat: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <9800000>; + voltage-max-design-microvolt = <4350000>; + voltage-min-design-microvolt = <3000000>; + }; + edp_panel: edp-panel { compatible = "boe,nv140fhmn49"; backlight = <&backlight>; enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&panel_en_gpio>; + pinctrl-0 = <&panel_en_pin>; power-supply = <&vcc3v3_panel>; ports { @@ -60,7 +67,7 @@ gpio-key-lid { compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&lidbtn_gpio>; + pinctrl-0 = <&lidbtn_pin>; lid { debounce-interval = <20>; @@ -76,7 +83,7 @@ gpio-key-power { compatible = "gpio-keys"; pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn_gpio>; + pinctrl-0 = <&pwrbtn_pin>; power { debounce-interval = <20>; @@ -117,7 +124,7 @@ clocks = <&rk808 1>; clock-names = "ext_clock"; pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h_gpio>; + pinctrl-0 = <&wifi_enable_h_pin>; post-power-on-delay-ms = <100>; power-off-delay-us = <500000>; @@ -129,7 +136,7 @@ es8316-sound { compatible = "simple-audio-card"; pinctrl-names = "default"; - pinctrl-0 = <&hp_det_gpio>; + pinctrl-0 = <&hp_det_pin>; simple-audio-card,name = "rockchip,es8316-codec"; simple-audio-card,format = "i2s"; simple-audio-card,mclk-fs = <256>; @@ -213,7 +220,7 @@ enable-active-high; gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&pwr_5v_gpio>; + pinctrl-0 = <&pwr_5v_pin>; regulator-name = "vcc5v0_usb"; regulator-always-on; regulator-min-microvolt = <5000000>; @@ -270,7 +277,7 @@ enable-active-high; gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&sdmmc0_pwr_h_gpio>; + pinctrl-0 = <&sdmmc0_pwr_h_pin>; regulator-name = "vcc3v0_sd"; regulator-always-on; regulator-min-microvolt = <3000000>; @@ -288,7 +295,7 @@ enable-active-high; gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&lcdvcc_en_gpio>; + pinctrl-0 = <&lcdvcc_en_pin>; regulator-name = "vcc3v3_panel"; regulator-always-on; regulator-min-microvolt = <3300000>; @@ -317,7 +324,7 @@ enable-active-high; gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_host_en_gpio>; + pinctrl-0 = <&vcc5v0_host_en_pin>; regulator-name = "vcc5v0_otg"; regulator-always-on; regulator-min-microvolt = <5000000>; @@ -336,7 +343,7 @@ enable-active-high; gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; - pinctrl-0 = <&vcc5v0_typec0_en_gpio>; + pinctrl-0 = <&vcc5v0_typec0_en_pin>; regulator-name = "vbus_5vout"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -368,7 +375,7 @@ /* Also triggered by USB charger */ pinctrl-names = "default"; - pinctrl-0 = <&dc_det_gpio>; + pinctrl-0 = <&dc_det_pin>; }; }; @@ -447,7 +454,7 @@ interrupt-parent = <&gpio3>; interrupts = <10 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int_l_gpio>; + pinctrl-0 = <&pmic_int_l_pin>; rockchip,system-power-controller; wakeup-source; @@ -627,7 +634,7 @@ reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-always-on; regulator-boot-on; @@ -646,7 +653,7 @@ reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-always-on; regulator-boot-on; @@ -693,7 +700,7 @@ interrupt-parent = <&gpio1>; interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&fusb0_int_gpio>; + pinctrl-0 = <&fusb0_int_pin>; vbus-supply = <&vbus_typec>; connector { @@ -741,11 +748,29 @@ }; }; }; + + cw2015@62 { + compatible = "cellwise,cw2015"; + reg = <0x62>; + cellwise,battery-profile = /bits/ 8 < + 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63 + 0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36 + 0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69 + 0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59 + 0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17 + 0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D + 0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB + 0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11 + >; + cellwise,monitor-interval-ms = <5000>; + monitored-battery = <&bat>; + power-supplies = <&mains_charger>, <&fusb0>; + }; }; &i2s1 { pinctrl-names = "default"; - pinctrl-0 = <&i2s_8ch_mclk_gpio>, <&i2s1_2ch_bus>; + pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>; rockchip,capture-channels = <8>; rockchip,playback-channels = <8>; status = "okay"; @@ -777,49 +802,49 @@ &pinctrl { buttons { - pwrbtn_gpio: pwrbtn-gpio { + pwrbtn_pin: pwrbtn-pin { rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; - lidbtn_gpio: lidbtn-gpio { + lidbtn_pin: lidbtn-pin { rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; dc-charger { - dc_det_gpio: dc-det-gpio { + dc_det_pin: dc-det-pin { rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; es8316 { - hp_det_gpio: hp-det-gpio { + hp_det_pin: hp-det-pin { rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; fusb302x { - fusb0_int_gpio: fusb0-int-gpio { + fusb0_int_pin: fusb0-int-pin { rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; }; }; i2s1 { - i2s_8ch_mclk_gpio: i2s-8ch-mclk-gpio { + i2s_8ch_mclk_pin: i2s-8ch-mclk-pin { rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>; }; }; lcd-panel { - lcdvcc_en_gpio: lcdvcc-en-gpio { + lcdvcc_en_pin: lcdvcc-en-pin { rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; }; - panel_en_gpio: panel-en-gpio { + panel_en_pin: panel-en-pin { rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>; }; - lcd_panel_reset_gpio: lcd-panel-reset-gpio { + lcd_panel_reset_pin: lcd-panel-reset-pin { rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; @@ -835,58 +860,58 @@ }; pmic { - pmic_int_l_gpio: pmic-int-l-gpio { + pmic_int_l_pin: pmic-int-l-pin { rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; sdcard { - sdmmc0_pwr_h_gpio: sdmmc0-pwr-h-gpio { + sdmmc0_pwr_h_pin: sdmmc0-pwr-h-pin { rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; sdio-pwrseq { - wifi_enable_h_gpio: wifi-enable-h-gpio { + wifi_enable_h_pin: wifi-enable-h-pin { rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; usb-typec { - vcc5v0_typec0_en_gpio: vcc5v0-typec0-en-gpio { + vcc5v0_typec0_en_pin: vcc5v0-typec0-en-pin { rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; }; }; usb2 { - pwr_5v_gpio: pwr-5v-gpio { + pwr_5v_pin: pwr-5v-pin { rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; - vcc5v0_host_en_gpio: vcc5v0-host-en-gpio { + vcc5v0_host_en_pin: vcc5v0-host-en-pin { rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; wireless-bluetooth { - bt_wake_gpio: bt-wake-gpio { + bt_wake_pin: bt-wake-pin { rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; - bt_host_wake_gpio: bt-host-wake-gpio { + bt_host_wake_pin: bt-host-wake-pin { rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; }; - bt_reset_gpio: bt-reset-gpio { + bt_reset_pin: bt-reset-pin { rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -1034,7 +1059,7 @@ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; max-speed = <1500000>; pinctrl-names = "default"; - pinctrl-0 = <&bt_host_wake_gpio &bt_wake_gpio &bt_reset_gpio>; + pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>; shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; vbat-supply = <&wifi_bat>; vddio-supply = <&vcc_wl>; diff --git a/dts/src/arm64/rockchip/rk3399-puma-haikou.dts b/dts/src/arm64/rockchip/rk3399-puma-haikou.dts index d80d6b7268..a8d363568f 100644 --- a/dts/src/arm64/rockchip/rk3399-puma-haikou.dts +++ b/dts/src/arm64/rockchip/rk3399-puma-haikou.dts @@ -15,9 +15,9 @@ }; leds { - pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>; + pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>; - sd-card-led { + sd_card_led: led-1 { label = "sd_card_led"; gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>; linux,default-trigger = "mmc0"; @@ -179,7 +179,7 @@ }; leds { - led_sd_haikou: led-sd-gpio { + sd_card_led_pin: sd-card-led-pin { rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/dts/src/arm64/rockchip/rk3399-puma.dtsi b/dts/src/arm64/rockchip/rk3399-puma.dtsi index 07694b196f..4660416c8f 100644 --- a/dts/src/arm64/rockchip/rk3399-puma.dtsi +++ b/dts/src/arm64/rockchip/rk3399-puma.dtsi @@ -11,9 +11,9 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&led_pin_module>; + pinctrl-0 = <&module_led_pin>; - module-led { + module_led: led-0 { label = "module_led"; gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; @@ -101,7 +101,7 @@ vcc5v0_host: vcc5v0-host-regulator { compatible = "regulator-fixed"; - gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>; enable-active-low; pinctrl-names = "default"; pinctrl-0 = <&vcc5v0_host_en>; @@ -157,7 +157,7 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>; + snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; tx_delay = <0x10>; @@ -450,7 +450,7 @@ }; leds { - led_pin_module: led-module-gpio { + module_led_pin: module-led-pin { rockchip,pins = <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/dts/src/arm64/rockchip/rk3399-roc-pc.dtsi b/dts/src/arm64/rockchip/rk3399-roc-pc.dtsi index 9f225e9c3d..b85ec31cd2 100644 --- a/dts/src/arm64/rockchip/rk3399-roc-pc.dtsi +++ b/dts/src/arm64/rockchip/rk3399-roc-pc.dtsi @@ -61,23 +61,23 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>; + pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>; - work-led { + work_led: led-0 { label = "green:work"; gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; default-state = "on"; linux,default-trigger = "heartbeat"; }; - diy-led { + diy_led: led-1 { label = "red:diy"; gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>; default-state = "off"; linux,default-trigger = "mmc1"; }; - yellow-led { + yellow_led: led-2 { label = "yellow:yellow-led"; gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; default-state = "off"; @@ -456,7 +456,7 @@ reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -475,7 +475,7 @@ reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -595,25 +595,25 @@ }; leds { - diy_led_gpio: diy_led-gpio { + diy_led_pin: diy-led-pin { rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; }; - work_led_gpio: work_led-gpio { + work_led_pin: work-led-pin { rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; }; - yellow_led_gpio: yellow_led-gpio { + yellow_led_pin: yellow-led-pin { rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; pmic { - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; diff --git a/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts b/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts index 3923ec01ef..60f98a3e19 100644 --- a/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts +++ b/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts @@ -390,7 +390,7 @@ reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -409,7 +409,7 @@ reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -532,11 +532,11 @@ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; diff --git a/dts/src/arm64/rockchip/rk3399-rock960.dtsi b/dts/src/arm64/rockchip/rk3399-rock960.dtsi index ba7c75c9f2..5e3ac589bc 100644 --- a/dts/src/arm64/rockchip/rk3399-rock960.dtsi +++ b/dts/src/arm64/rockchip/rk3399-rock960.dtsi @@ -470,12 +470,12 @@ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; diff --git a/dts/src/arm64/rockchip/rk3399-rockpro64.dtsi b/dts/src/arm64/rockchip/rk3399-rockpro64.dtsi index 6788ab28f8..6e553ff475 100644 --- a/dts/src/arm64/rockchip/rk3399-rockpro64.dtsi +++ b/dts/src/arm64/rockchip/rk3399-rockpro64.dtsi @@ -39,15 +39,15 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; + pinctrl-0 = <&work_led_pin>, <&diy_led_pin>; - work-led { + work_led: led-0 { label = "work"; default-state = "on"; gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; }; - diy-led { + diy_led: led-1 { label = "diy"; default-state = "off"; gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; @@ -445,7 +445,7 @@ reg = <0x40>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel1_gpio>; + pinctrl-0 = <&vsel1_pin>; regulator-name = "vdd_cpu_b"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -464,7 +464,7 @@ reg = <0x41>; fcs,suspend-voltage-selector = <1>; pinctrl-names = "default"; - pinctrl-0 = <&vsel2_gpio>; + pinctrl-0 = <&vsel2_pin>; regulator-name = "vdd_gpu"; regulator-min-microvolt = <712500>; regulator-max-microvolt = <1500000>; @@ -588,11 +588,11 @@ }; leds { - work_led_gpio: work_led-gpio { + work_led_pin: work-led-pin { rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; - diy_led_gpio: diy_led-gpio { + diy_led_pin: diy-led-pin { rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; @@ -612,11 +612,11 @@ rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; @@ -795,7 +795,7 @@ &usbdrd_dwc3_0 { status = "okay"; - dr_mode = "otg"; + dr_mode = "host"; }; &usbdrd3_1 { diff --git a/dts/src/arm64/rockchip/rk3399-sapphire.dtsi b/dts/src/arm64/rockchip/rk3399-sapphire.dtsi index 1bc1579674..701a567d76 100644 --- a/dts/src/arm64/rockchip/rk3399-sapphire.dtsi +++ b/dts/src/arm64/rockchip/rk3399-sapphire.dtsi @@ -481,11 +481,11 @@ <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; }; - vsel1_gpio: vsel1-gpio { + vsel1_pin: vsel1-pin { rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; }; - vsel2_gpio: vsel2-gpio { + vsel2_pin: vsel2-pin { rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; }; }; diff --git a/dts/src/arm64/rockchip/rk3399.dtsi b/dts/src/arm64/rockchip/rk3399.dtsi index 2581e9cc7a..ada724b12f 100644 --- a/dts/src/arm64/rockchip/rk3399.dtsi +++ b/dts/src/arm64/rockchip/rk3399.dtsi @@ -209,6 +209,7 @@ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>, <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC0_PERILP>; clock-names = "apb_pclk"; }; @@ -219,6 +220,7 @@ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>, <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <1>; + arm,pl330-periph-burst; clocks = <&cru ACLK_DMAC1_PERILP>; clock-names = "apb_pclk"; }; @@ -845,9 +847,9 @@ rockchip,grf = <&grf>; rockchip,hw-tshut-temp = <95000>; pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&otp_gpio>; + pinctrl-0 = <&otp_pin>; pinctrl-1 = <&otp_out>; - pinctrl-2 = <&otp_gpio>; + pinctrl-2 = <&otp_pin>; #thermal-sensor-cells = <1>; status = "disabled"; }; @@ -1397,6 +1399,17 @@ status = "disabled"; }; + mipi_dphy_rx0: mipi-dphy-rx0 { + compatible = "rockchip,rk3399-mipi-dphy-rx0"; + clocks = <&cru SCLK_MIPIDPHY_REF>, + <&cru SCLK_DPHY_RX0_CFG>, + <&cru PCLK_VIO_GRF>; + clock-names = "dphy-ref", "dphy-cfg", "grf"; + power-domains = <&power RK3399_PD_VIO>; + #phy-cells = <0>; + status = "disabled"; + }; + u2phy0: usb2-phy@e450 { compatible = "rockchip,rk3399-usb2phy"; reg = <0xe450 0x10>; @@ -2485,7 +2498,7 @@ }; tsadc { - otp_gpio: otp-gpio { + otp_pin: otp-pin { rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/dts/src/arm64/rockchip/rk3399pro-rock-pi-n10.dts b/dts/src/arm64/rockchip/rk3399pro-rock-pi-n10.dts index a1783e7f76..369de5dc0e 100644 --- a/dts/src/arm64/rockchip/rk3399pro-rock-pi-n10.dts +++ b/dts/src/arm64/rockchip/rk3399pro-rock-pi-n10.dts @@ -8,11 +8,15 @@ /dts-v1/; #include "rk3399.dtsi" #include "rk3399-opp.dtsi" -#include "rk3399pro-vmarc-som.dtsi" #include <arm/rockchip-radxa-dalang-carrier.dtsi> +#include "rk3399pro-vmarc-som.dtsi" / { model = "Radxa ROCK Pi N10"; compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; }; diff --git a/dts/src/arm64/rockchip/rk3399pro-vmarc-som.dtsi b/dts/src/arm64/rockchip/rk3399pro-vmarc-som.dtsi index 0a516334f1..5d087be04a 100644 --- a/dts/src/arm64/rockchip/rk3399pro-vmarc-som.dtsi +++ b/dts/src/arm64/rockchip/rk3399pro-vmarc-som.dtsi @@ -12,30 +12,16 @@ / { compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro"; - clkin_gmac: external-gmac-clock { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "clkin_gmac"; - #clock-cells = <0>; - }; - - vcc12v_dcin: vcc12v-dcin-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc12v_dcin"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vcc5v0_sys: vcc5v0-sys-regulator { + vcc3v3_pcie: vcc-pcie-regulator { compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; + enable-active-high; + gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwr>; + regulator-name = "vcc3v3_pcie"; regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc12v_dcin>; + vin-supply = <&vcc5v0_sys>; }; }; @@ -61,23 +47,20 @@ &gmac { assigned-clocks = <&cru SCLK_RMII_SRC>; - assigned-clock-parents = <&clkin_gmac>; - clock_in_out = "input"; phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 50000>; - tx_delay = <0x28>; - rx_delay = <0x11>; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; }; &i2c0 { clock-frequency = <400000>; - i2c-scl-rising-time-ns = <180>; i2c-scl-falling-time-ns = <30>; + i2c-scl-rising-time-ns = <180>; status = "okay"; rk809: pmic@20 { @@ -171,7 +154,8 @@ regulator-min-microvolt = <900000>; regulator-max-microvolt = <900000>; regulator-state-mem { - regulator-off-in-suspend; + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; }; }; @@ -206,7 +190,8 @@ regulator-min-microvolt = <1850000>; regulator-max-microvolt = <1850000>; regulator-state-mem { - regulator-off-in-suspend; + regulator-on-in-suspend; + regulator-suspend-microvolt = <1850000>; }; }; @@ -297,11 +282,88 @@ }; }; +&i2c1 { + i2c-scl-falling-time-ns = <30>; + i2c-scl-rising-time-ns = <140>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + status = "okay"; + + hym8563: hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + interrupt-parent = <&gpio4>; + interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + &io_domains { status = "okay"; bt656-supply = <&vcca_1v8>; - sdmmc-supply = <&vccio_sd>; gpio1830-supply = <&vccio_3v0>; + sdmmc-supply = <&vccio_sd>; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + max-link-speed = <2>; + num-lanes = <4>; + pinctrl-0 = <&pcie_clkreqnb_cpm>; + pinctrl-names = "default"; + vpcie0v9-supply = <&vcca_0v9>; /* VCC_0V9_S0 */ + vpcie1v8-supply = <&vcca_1v8>; /* VCC_1V8_S0 */ + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>; + }; + }; + + pcie { + pcie_pwr: pcie-pwr { + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>; + }; + }; + + vbus_host { + usb1_en_oc: usb1-en-oc { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + vbus_typec { + usb0_en_oc: usb0-en-oc { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; }; &pmu_io_domains { @@ -317,17 +379,79 @@ status = "okay"; }; -&tsadc { +&sdmmc { + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + max-frequency = <150000000>; +}; + +&tcphy0 { status = "okay"; +}; + +&tsadc { rockchip,hw-tshut-mode = <1>; rockchip,hw-tshut-polarity = <1>; + status = "okay"; }; -&pinctrl { - pmic { - pmic_int_l: pmic-int-l { - rockchip,pins = - <1 RK_PC2 0 &pcfg_pull_up>; - }; +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + phy-supply = <&vbus_typec>; + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vbus_host>; + status = "okay"; + }; +}; + + +&u2phy1 { + status = "okay"; + + u2phy1_host: host-port { + phy-supply = <&vbus_host>; + status = "okay"; }; }; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; +}; + +&vbus_host { + enable-active-high; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */ + pinctrl-names = "default"; + pinctrl-0 = <&usb1_en_oc>; +}; + +&vbus_typec { + enable-active-high; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */ + pinctrl-names = "default"; + pinctrl-0 = <&usb0_en_oc>; +}; diff --git a/dts/src/arm64/socionext/uniphier-ld11-global.dts b/dts/src/arm64/socionext/uniphier-ld11-global.dts index 816ac25fa1..da44a15a8a 100644 --- a/dts/src/arm64/socionext/uniphier-ld11-global.dts +++ b/dts/src/arm64/socionext/uniphier-ld11-global.dts @@ -157,7 +157,7 @@ }; &mdio { - ethphy: ethphy@1 { + ethphy: ethernet-phy@1 { reg = <1>; }; }; diff --git a/dts/src/arm64/socionext/uniphier-ld11-ref.dts b/dts/src/arm64/socionext/uniphier-ld11-ref.dts index 693171f82f..617d2b1e9b 100644 --- a/dts/src/arm64/socionext/uniphier-ld11-ref.dts +++ b/dts/src/arm64/socionext/uniphier-ld11-ref.dts @@ -20,7 +20,7 @@ aliases { serial0 = &serial0; - serial1 = &serial1; + serial1 = &serialsc; serial2 = &serial2; serial3 = &serial3; i2c0 = &i2c0; @@ -42,6 +42,10 @@ interrupts = <0 8>; }; +&serialsc { + interrupts = <0 8>; +}; + &serial0 { status = "okay"; }; @@ -76,7 +80,7 @@ }; &mdio { - ethphy: ethphy@1 { + ethphy: ethernet-phy@1 { reg = <1>; }; }; diff --git a/dts/src/arm64/socionext/uniphier-ld20-akebi96.dts b/dts/src/arm64/socionext/uniphier-ld20-akebi96.dts index 816919b42d..aa159a1129 100644 --- a/dts/src/arm64/socionext/uniphier-ld20-akebi96.dts +++ b/dts/src/arm64/socionext/uniphier-ld20-akebi96.dts @@ -153,7 +153,7 @@ }; &mdio { - ethphy: ethphy@0 { + ethphy: ethernet-phy@0 { reg = <0>; }; }; diff --git a/dts/src/arm64/socionext/uniphier-ld20-global.dts b/dts/src/arm64/socionext/uniphier-ld20-global.dts index 2c00008266..a01579cb3b 100644 --- a/dts/src/arm64/socionext/uniphier-ld20-global.dts +++ b/dts/src/arm64/socionext/uniphier-ld20-global.dts @@ -141,7 +141,7 @@ }; &mdio { - ethphy: ethphy@1 { + ethphy: ethernet-phy@1 { reg = <1>; }; }; diff --git a/dts/src/arm64/socionext/uniphier-ld20-ref.dts b/dts/src/arm64/socionext/uniphier-ld20-ref.dts index eeb976e789..39ee279a1e 100644 --- a/dts/src/arm64/socionext/uniphier-ld20-ref.dts +++ b/dts/src/arm64/socionext/uniphier-ld20-ref.dts @@ -20,7 +20,7 @@ aliases { serial0 = &serial0; - serial1 = &serial1; + serial1 = &serialsc; serial2 = &serial2; serial3 = &serial3; i2c0 = &i2c0; @@ -42,6 +42,10 @@ interrupts = <0 8>; }; +&serialsc { + interrupts = <0 8>; +}; + &serial0 { status = "okay"; }; @@ -64,7 +68,7 @@ }; &mdio { - ethphy: ethphy@0 { + ethphy: ethernet-phy@0 { reg = <0>; }; }; diff --git a/dts/src/arm64/socionext/uniphier-ld20.dtsi b/dts/src/arm64/socionext/uniphier-ld20.dtsi index f4a56b2088..a87b8a6787 100644 --- a/dts/src/arm64/socionext/uniphier-ld20.dtsi +++ b/dts/src/arm64/socionext/uniphier-ld20.dtsi @@ -936,7 +936,9 @@ compatible = "socionext,uniphier-ld20-pcie-phy"; reg = <0x66038000 0x4000>; #phy-cells = <0>; + clock-names = "link"; clocks = <&sys_clk 24>; + reset-names = "link"; resets = <&sys_rst 24>; socionext,syscon = <&soc_glue>; }; diff --git a/dts/src/arm64/socionext/uniphier-pxs3-ref.dts b/dts/src/arm64/socionext/uniphier-pxs3-ref.dts index 7c30c6b56b..086040306f 100644 --- a/dts/src/arm64/socionext/uniphier-pxs3-ref.dts +++ b/dts/src/arm64/socionext/uniphier-pxs3-ref.dts @@ -19,7 +19,7 @@ aliases { serial0 = &serial0; - serial1 = &serial1; + serial1 = &serialsc; serial2 = &serial2; serial3 = &serial3; i2c0 = &i2c0; @@ -43,6 +43,10 @@ interrupts = <4 8>; }; +&serialsc { + interrupts = <4 8>; +}; + &spi0 { status = "okay"; }; @@ -97,7 +101,7 @@ }; &mdio0 { - ethphy0: ethphy@0 { + ethphy0: ethernet-phy@0 { reg = <0>; }; }; @@ -108,7 +112,7 @@ }; &mdio1 { - ethphy1: ethphy@0 { + ethphy1: ethernet-phy@0 { reg = <0>; }; }; diff --git a/dts/src/arm64/socionext/uniphier-pxs3.dtsi b/dts/src/arm64/socionext/uniphier-pxs3.dtsi index 72f16881cf..0e52dadf54 100644 --- a/dts/src/arm64/socionext/uniphier-pxs3.dtsi +++ b/dts/src/arm64/socionext/uniphier-pxs3.dtsi @@ -833,7 +833,9 @@ compatible = "socionext,uniphier-pxs3-pcie-phy"; reg = <0x66038000 0x4000>; #phy-cells = <0>; + clock-names = "link"; clocks = <&sys_clk 24>; + reset-names = "link"; resets = <&sys_rst 24>; socionext,syscon = <&soc_glue>; }; diff --git a/dts/src/arm64/ti/k3-am65-main.dtsi b/dts/src/arm64/ti/k3-am65-main.dtsi index 61815228e2..9edfae5944 100644 --- a/dts/src/arm64/ti/k3-am65-main.dtsi +++ b/dts/src/arm64/ti/k3-am65-main.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for AM6 SoC Family Main Domain peripherals * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/phy/phy-am654-serdes.h> @@ -42,7 +42,7 @@ */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - gic_its: gic-its@1820000 { + gic_its: msi-controller@1820000 { compatible = "arm,gic-v3-its"; reg = <0x00 0x01820000 0x00 0x10000>; socionext,synquacer-pre-its = <0x1000000 0x400000>; @@ -244,9 +244,43 @@ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; mmc-ddr-1_8v; mmc-hs200-1_8v; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0x0>; + ti,otap-del-sel-sdr25 = <0x0>; + ti,otap-del-sel-sdr50 = <0x8>; + ti,otap-del-sel-sdr104 = <0x7>; + ti,otap-del-sel-ddr50 = <0x5>; + ti,otap-del-sel-ddr52 = <0x5>; + ti,otap-del-sel-hs200 = <0x5>; + ti,otap-del-sel-hs400 = <0x0>; + ti,trm-icp = <0x8>; + dma-coherent; + }; + + sdhci1: sdhci@4fa0000 { + compatible = "ti,am654-sdhci-5.1"; + reg = <0x0 0x4fa0000 0x0 0x260>, <0x0 0x4fb0000 0x0 0x134>; + power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 48 0>, <&k3_clks 48 1>; + clock-names = "clk_ahb", "clk_xin"; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0x0>; + ti,otap-del-sel-sdr25 = <0x0>; + ti,otap-del-sel-sdr50 = <0x8>; + ti,otap-del-sel-sdr104 = <0x7>; + ti,otap-del-sel-ddr50 = <0x4>; + ti,otap-del-sel-ddr52 = <0x4>; + ti,otap-del-sel-hs200 = <0x7>; + ti,clkbuf-sel = <0x7>; ti,otap-del-sel = <0x2>; ti,trm-icp = <0x8>; dma-coherent; + no-1-8-v; }; scm_conf: scm_conf@100000 { diff --git a/dts/src/arm64/ti/k3-am65-mcu.dtsi b/dts/src/arm64/ti/k3-am65-mcu.dtsi index ae5f813d0c..8c1abcfe08 100644 --- a/dts/src/arm64/ti/k3-am65-mcu.dtsi +++ b/dts/src/arm64/ti/k3-am65-mcu.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for AM6 SoC Family MCU Domain peripherals * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu { diff --git a/dts/src/arm64/ti/k3-am65-wakeup.dtsi b/dts/src/arm64/ti/k3-am65-wakeup.dtsi index 54a133fa1b..5f55b9e82c 100644 --- a/dts/src/arm64/ti/k3-am65-wakeup.dtsi +++ b/dts/src/arm64/ti/k3-am65-wakeup.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for AM6 SoC Family Wakeup Domain peripherals * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_wakeup { @@ -34,6 +34,11 @@ }; }; + chipid@43000014 { + compatible = "ti,am654-chipid"; + reg = <0x43000014 0x4>; + }; + wkup_pmx0: pinmux@4301c000 { compatible = "pinctrl-single"; reg = <0x4301c000 0x118>; diff --git a/dts/src/arm64/ti/k3-am65.dtsi b/dts/src/arm64/ti/k3-am65.dtsi index 5be75e4309..27c0406b10 100644 --- a/dts/src/arm64/ti/k3-am65.dtsi +++ b/dts/src/arm64/ti/k3-am65.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for AM6 SoC Family * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/gpio/gpio.h> diff --git a/dts/src/arm64/ti/k3-am654-base-board.dts b/dts/src/arm64/ti/k3-am654-base-board.dts index 2f3d3316a1..611e662070 100644 --- a/dts/src/arm64/ti/k3-am654-base-board.dts +++ b/dts/src/arm64/ti/k3-am654-base-board.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -167,6 +167,19 @@ >; }; + main_mmc1_pins_default: main_mmc1_pins_default { + pinctrl-single,pins = < + AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */ + AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */ + AM65X_IOPAD(0x02d0, PIN_INPUT_PULLUP, 0) /* (D28) MMC1_DAT0 */ + AM65X_IOPAD(0x02cc, PIN_INPUT_PULLUP, 0) /* (E27) MMC1_DAT1 */ + AM65X_IOPAD(0x02c8, PIN_INPUT_PULLUP, 0) /* (D26) MMC1_DAT2 */ + AM65X_IOPAD(0x02c4, PIN_INPUT_PULLUP, 0) /* (D27) MMC1_DAT3 */ + AM65X_IOPAD(0x02dc, PIN_INPUT_PULLUP, 0) /* (B24) MMC1_SDCD */ + AM65X_IOPAD(0x02e0, PIN_INPUT, 0) /* (C24) MMC1_SDWP */ + >; + }; + usb1_pins_default: usb1_pins_default { pinctrl-single,pins = < AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */ @@ -300,6 +313,18 @@ disable-wp; }; +/* + * Because of erratas i2025 and i2026 for silicon revision 1.0, the + * SD card interface might fail. Boards with sr1.0 are recommended to + * disable sdhci1 + */ +&sdhci1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc1_pins_default>; + ti,driver-strength-ohm = <50>; + disable-wp; +}; + &dwc3_1 { status = "okay"; }; diff --git a/dts/src/arm64/ti/k3-am654.dtsi b/dts/src/arm64/ti/k3-am654.dtsi index b221abf43a..f0a6541b80 100644 --- a/dts/src/arm64/ti/k3-am654.dtsi +++ b/dts/src/arm64/ti/k3-am654.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for AM6 SoC family in Quad core configuration * - * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2018 Texas Instruments Incorporated - https://www.ti.com/ */ #include "k3-am65.dtsi" diff --git a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts index 6df823aaa3..8bc1e6ecc5 100644 --- a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts +++ b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -34,6 +34,55 @@ gpios = <&wkup_gpio0 7 GPIO_ACTIVE_LOW>; }; }; + + evm_12v0: fixedregulator-evm12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "evm_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: fixedregulator-vsys3v3 { + /* Output of LMS140 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_5v0: fixedregulator-vsys5v0 { + /* Output of LM5140 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + sound0: sound@0 { + compatible = "ti,j721e-cpb-audio"; + model = "j721e-cpb"; + + ti,cpb-mcasp = <&mcasp10>; + ti,cpb-codec = <&pcm3168a_1>; + + clocks = <&k3_clks 184 1>, + <&k3_clks 184 2>, <&k3_clks 184 4>, + <&k3_clks 157 371>, + <&k3_clks 157 400>, <&k3_clks 157 401>; + clock-names = "cpb-mcasp-auxclk", + "cpb-mcasp-auxclk-48000", "cpb-mcasp-auxclk-44100", + "cpb-codec-scki", + "cpb-codec-scki-48000", "cpb-codec-scki-44100"; + }; }; &main_pmx0 { @@ -60,6 +109,7 @@ main_usbss0_pins_default: main_usbss0_pins_default { pinctrl-single,pins = < J721E_IOPAD(0x290, PIN_OUTPUT, 0) /* (U6) USB0_DRVVBUS */ + J721E_IOPAD(0x210, PIN_INPUT, 7) /* (W3) MCAN1_RX.GPIO1_3 */ >; }; @@ -103,10 +153,24 @@ >; }; - main_i2c1_exp4_pins_default: main-i2c1-exp4-pins-default { + mcasp10_pins_default: mcasp10_pins_default { pinctrl-single,pins = < - J721E_IOPAD(0x230, PIN_INPUT, 7) /* (U2) ECAP0_IN_APWM_OUT.GPIO1_11 */ - >; + J721E_IOPAD(0x158, PIN_OUTPUT_PULLDOWN, 12) /* (U23) RGMII5_TX_CTL.MCASP10_ACLKX */ + J721E_IOPAD(0x15c, PIN_OUTPUT_PULLDOWN, 12) /* (U26) RGMII5_RX_CTL.MCASP10_AFSX */ + J721E_IOPAD(0x160, PIN_OUTPUT_PULLDOWN, 12) /* (V28) RGMII5_TD3.MCASP10_AXR0 */ + J721E_IOPAD(0x164, PIN_OUTPUT_PULLDOWN, 12) /* (V29) RGMII5_TD2.MCASP10_AXR1 */ + J721E_IOPAD(0x170, PIN_OUTPUT_PULLDOWN, 12) /* (U29) RGMII5_TXC.MCASP10_AXR2 */ + J721E_IOPAD(0x174, PIN_OUTPUT_PULLDOWN, 12) /* (U25) RGMII5_RXC.MCASP10_AXR3 */ + J721E_IOPAD(0x198, PIN_INPUT_PULLDOWN, 12) /* (V25) RGMII6_TD1.MCASP10_AXR4 */ + J721E_IOPAD(0x19c, PIN_INPUT_PULLDOWN, 12) /* (W27) RGMII6_TD0.MCASP10_AXR5 */ + J721E_IOPAD(0x1a0, PIN_INPUT_PULLDOWN, 12) /* (W29) RGMII6_TXC.MCASP10_AXR6 */ + >; + }; + + audi_ext_refclk2_pins_default: audi_ext_refclk2_pins_default { + pinctrl-single,pins = < + J721E_IOPAD(0x1a4, PIN_OUTPUT, 3) /* (W26) RGMII6_RXC.AUDIO_EXT_REFCLK2 */ + >; }; }; @@ -335,16 +399,44 @@ status = "disabled"; }; +&usb_serdes_mux { + idle-states = <1>, <0>; /* USB0 to SERDES3, USB1 to SERDES1 */ +}; + +&serdes_ln_ctrl { + idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>, + <SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>, + <SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>, + <SERDES3_LANE0_USB3_0_SWAP>, <SERDES3_LANE1_USB3_0>, + <SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>; +}; + +&serdes_wiz3 { + typec-dir-gpios = <&main_gpio1 3 GPIO_ACTIVE_HIGH>; + typec-dir-debounce-ms = <700>; /* TUSB321, tCCB_DEFAULT 133 ms */ +}; + +&serdes3 { + serdes3_usb_link: link@0 { + reg = <0>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = <PHY_TYPE_USB3>; + resets = <&serdes_wiz3 1>, <&serdes_wiz3 2>; + }; +}; + &usbss0 { pinctrl-names = "default"; pinctrl-0 = <&main_usbss0_pins_default>; - ti,usb2-only; ti,vbus-divider; }; &usb0 { dr_mode = "otg"; - maximum-speed = "high-speed"; + maximum-speed = "super-speed"; + phys = <&serdes3_usb_link>; + phy-names = "cdns3,usb3-phy"; }; &usbss1 { @@ -407,6 +499,22 @@ reg = <0x22>; gpio-controller; #gpio-cells = <2>; + + p09 { + /* P11 - MCASP/TRACE_MUX_S0 */ + gpio-hog; + gpios = <9 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "MCASP/TRACE_MUX_S0"; + }; + + p10 { + /* P12 - MCASP/TRACE_MUX_S1 */ + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "MCASP/TRACE_MUX_S1"; + }; }; }; @@ -429,6 +537,12 @@ }; }; +&k3_clks { + /* Confiure AUDIO_EXT_REFCLK2 pin as output */ + pinctrl-names = "default"; + pinctrl-0 = <&audi_ext_refclk2_pins_default>; +}; + &main_i2c3 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c3_pins_default>; @@ -440,6 +554,31 @@ gpio-controller; #gpio-cells = <2>; }; + + pcm3168a_1: audio-codec@44 { + compatible = "ti,pcm3168a"; + reg = <0x44>; + + #sound-dai-cells = <1>; + + reset-gpios = <&exp3 0 GPIO_ACTIVE_LOW>; + + /* C_AUDIO_REFCLK2 -> RGMII6_RXC (W26) */ + clocks = <&k3_clks 157 371>; + clock-names = "scki"; + + /* HSDIV3_16FFT_MAIN_4_HSDIVOUT2_CLK -> REFCLK2 */ + assigned-clocks = <&k3_clks 157 371>; + assigned-clock-parents = <&k3_clks 157 400>; + assigned-clock-rates = <24576000>; /* for 48KHz */ + + VDD1-supply = <&vsys_3v3>; + VDD2-supply = <&vsys_3v3>; + VCCAD1-supply = <&vsys_5v0>; + VCCAD2-supply = <&vsys_5v0>; + VCCDA1-supply = <&vsys_5v0>; + VCCDA2-supply = <&vsys_5v0>; + }; }; &main_i2c6 { @@ -492,3 +631,23 @@ <&k3_clks 152 11>, /* PLL18_HSDIV0 */ <&k3_clks 152 18>; /* PLL23_HSDIV0 */ }; + +&mcasp10 { + #sound-dai-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&mcasp10_pins_default>; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + auxclk-fs-ratio = <256>; + + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 1 1 1 + 2 2 2 0 + >; + tx-num-evt = <0>; + rx-num-evt = <0>; + + status = "okay"; +}; diff --git a/dts/src/arm64/ti/k3-j721e-main.dtsi b/dts/src/arm64/ti/k3-j721e-main.dtsi index 96c929da63..d14060207f 100644 --- a/dts/src/arm64/ti/k3-j721e-main.dtsi +++ b/dts/src/arm64/ti/k3-j721e-main.dtsi @@ -2,8 +2,11 @@ /* * Device Tree Source for J721E SoC Family Main Domain peripherals * - * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/ */ +#include <dt-bindings/phy/phy.h> +#include <dt-bindings/mux/mux.h> +#include <dt-bindings/mux/mux-j721e-wiz.h> &cbass_main { msmc_ram: sram@70000000 { @@ -18,6 +21,38 @@ }; }; + scm_conf: scm-conf@100000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0 0x00100000 0 0x1c000>; /* excludes pinctrl region */ + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x00100000 0x1c000>; + + serdes_ln_ctrl: serdes-ln-ctrl@4080 { + compatible = "mmio-mux"; + reg = <0x00004080 0x50>; + #mux-control-cells = <1>; + mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */ + <0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */ + <0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */ + <0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */ + <0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>; + /* SERDES4 lane0/1/2/3 select */ + idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>, + <SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>, + <SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>, + <MUX_IDLE_AS_IS>, <SERDES3_LANE1_USB3_0>, + <SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>; + }; + + usb_serdes_mux: mux-controller@4000 { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4000 0x8000000>, /* USB0 to SERDES0/3 mux */ + <0x4010 0x8000000>; /* USB1 to SERDES1/2 mux */ + }; + }; + gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; #address-cells = <2>; @@ -31,7 +66,7 @@ /* vcpumntirq: virtual CPU interface maintenance interrupt */ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - gic_its: gic-its@1820000 { + gic_its: msi-controller@1820000 { compatible = "arm,gic-v3-its"; reg = <0x00 0x01820000 0x00 0x10000>; socionext,synquacer-pre-its = <0x1000000 0x400000>; @@ -95,7 +130,7 @@ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; }; - smmu0: smmu@36600000 { + smmu0: iommu@36600000 { compatible = "arm,smmu-v3"; reg = <0x0 0x36600000 0x0 0x100000>; interrupt-parent = <&gic500>; @@ -277,6 +312,246 @@ pinctrl-single,function-mask = <0xffffffff>; }; + dummy_cmn_refclk: dummy-cmn-refclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; + + dummy_cmn_refclk1: dummy-cmn-refclk1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; + + serdes_wiz0: wiz@5000000 { + compatible = "ti,j721e-wiz-16g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>; + assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>; + num-lanes = <2>; + #reset-cells = <1>; + ranges = <0x5000000 0x0 0x5000000 0x10000>; + + wiz0_pll0_refclk: pll0-refclk { + clocks = <&k3_clks 292 11>, <&dummy_cmn_refclk>; + #clock-cells = <0>; + assigned-clocks = <&wiz0_pll0_refclk>; + assigned-clock-parents = <&k3_clks 292 11>; + }; + + wiz0_pll1_refclk: pll1-refclk { + clocks = <&k3_clks 292 0>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz0_pll1_refclk>; + assigned-clock-parents = <&k3_clks 292 0>; + }; + + wiz0_refclk_dig: refclk-dig { + clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz0_refclk_dig>; + assigned-clock-parents = <&k3_clks 292 11>; + }; + + wiz0_cmn_refclk_dig_div: cmn-refclk-dig-div { + clocks = <&wiz0_refclk_dig>; + #clock-cells = <0>; + }; + + wiz0_cmn_refclk1_dig_div: cmn-refclk1-dig-div { + clocks = <&wiz0_pll1_refclk>; + #clock-cells = <0>; + }; + + serdes0: serdes@5000000 { + compatible = "ti,sierra-phy-t0"; + reg-names = "serdes"; + reg = <0x5000000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&serdes_wiz0 0>; + reset-names = "sierra_reset"; + clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + }; + }; + + serdes_wiz1: wiz@5010000 { + compatible = "ti,j721e-wiz-16g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 293 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&dummy_cmn_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + assigned-clocks = <&k3_clks 293 13>, <&k3_clks 293 0>; + assigned-clock-parents = <&k3_clks 293 17>, <&k3_clks 293 4>; + num-lanes = <2>; + #reset-cells = <1>; + ranges = <0x5010000 0x0 0x5010000 0x10000>; + + wiz1_pll0_refclk: pll0-refclk { + clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>; + #clock-cells = <0>; + assigned-clocks = <&wiz1_pll0_refclk>; + assigned-clock-parents = <&k3_clks 293 13>; + }; + + wiz1_pll1_refclk: pll1-refclk { + clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz1_pll1_refclk>; + assigned-clock-parents = <&k3_clks 293 0>; + }; + + wiz1_refclk_dig: refclk-dig { + clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz1_refclk_dig>; + assigned-clock-parents = <&k3_clks 293 13>; + }; + + wiz1_cmn_refclk_dig_div: cmn-refclk-dig-div{ + clocks = <&wiz1_refclk_dig>; + #clock-cells = <0>; + }; + + wiz1_cmn_refclk1_dig_div: cmn-refclk1-dig-div { + clocks = <&wiz1_pll1_refclk>; + #clock-cells = <0>; + }; + + serdes1: serdes@5010000 { + compatible = "ti,sierra-phy-t0"; + reg-names = "serdes"; + reg = <0x5010000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&serdes_wiz1 0>; + reset-names = "sierra_reset"; + clocks = <&wiz1_cmn_refclk_dig_div>, <&wiz1_cmn_refclk1_dig_div>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + }; + }; + + serdes_wiz2: wiz@5020000 { + compatible = "ti,j721e-wiz-16g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 294 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&dummy_cmn_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + assigned-clocks = <&k3_clks 294 11>, <&k3_clks 294 0>; + assigned-clock-parents = <&k3_clks 294 15>, <&k3_clks 294 4>; + num-lanes = <2>; + #reset-cells = <1>; + ranges = <0x5020000 0x0 0x5020000 0x10000>; + + wiz2_pll0_refclk: pll0-refclk { + clocks = <&k3_clks 294 11>, <&dummy_cmn_refclk>; + #clock-cells = <0>; + assigned-clocks = <&wiz2_pll0_refclk>; + assigned-clock-parents = <&k3_clks 294 11>; + }; + + wiz2_pll1_refclk: pll1-refclk { + clocks = <&k3_clks 294 0>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz2_pll1_refclk>; + assigned-clock-parents = <&k3_clks 294 0>; + }; + + wiz2_refclk_dig: refclk-dig { + clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz2_refclk_dig>; + assigned-clock-parents = <&k3_clks 294 11>; + }; + + wiz2_cmn_refclk_dig_div: cmn-refclk-dig-div { + clocks = <&wiz2_refclk_dig>; + #clock-cells = <0>; + }; + + wiz2_cmn_refclk1_dig_div: cmn-refclk1-dig-div { + clocks = <&wiz2_pll1_refclk>; + #clock-cells = <0>; + }; + + serdes2: serdes@5020000 { + compatible = "ti,sierra-phy-t0"; + reg-names = "serdes"; + reg = <0x5020000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&serdes_wiz2 0>; + reset-names = "sierra_reset"; + clocks = <&wiz2_cmn_refclk_dig_div>, <&wiz2_cmn_refclk1_dig_div>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + }; + }; + + serdes_wiz3: wiz@5030000 { + compatible = "ti,j721e-wiz-16g"; + #address-cells = <1>; + #size-cells = <1>; + power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&dummy_cmn_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + assigned-clocks = <&k3_clks 295 9>, <&k3_clks 295 0>; + assigned-clock-parents = <&k3_clks 295 13>, <&k3_clks 295 4>; + num-lanes = <2>; + #reset-cells = <1>; + ranges = <0x5030000 0x0 0x5030000 0x10000>; + + wiz3_pll0_refclk: pll0-refclk { + clocks = <&k3_clks 295 9>, <&dummy_cmn_refclk>; + #clock-cells = <0>; + assigned-clocks = <&wiz3_pll0_refclk>; + assigned-clock-parents = <&k3_clks 295 9>; + }; + + wiz3_pll1_refclk: pll1-refclk { + clocks = <&k3_clks 295 0>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz3_pll1_refclk>; + assigned-clock-parents = <&k3_clks 295 0>; + }; + + wiz3_refclk_dig: refclk-dig { + clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + #clock-cells = <0>; + assigned-clocks = <&wiz3_refclk_dig>; + assigned-clock-parents = <&k3_clks 295 9>; + }; + + wiz3_cmn_refclk_dig_div: cmn-refclk-dig-div { + clocks = <&wiz3_refclk_dig>; + #clock-cells = <0>; + }; + + wiz3_cmn_refclk1_dig_div: cmn-refclk1-dig-div { + clocks = <&wiz3_pll1_refclk>; + #clock-cells = <0>; + }; + + serdes3: serdes@5030000 { + compatible = "ti,sierra-phy-t0"; + reg-names = "serdes"; + reg = <0x5030000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&serdes_wiz3 0>; + reset-names = "sierra_reset"; + clocks = <&wiz3_cmn_refclk_dig_div>, <&wiz3_cmn_refclk1_dig_div>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + }; + }; + main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; diff --git a/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi b/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi index dc31bd0434..30a735bcd0 100644 --- a/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi +++ b/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals * - * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu_wakeup { @@ -48,6 +48,11 @@ }; }; + chipid@43000014 { + compatible = "ti,am654-chipid"; + reg = <0x0 0x43000014 0x0 0x4>; + }; + wkup_pmx0: pinmux@4301c000 { compatible = "pinctrl-single"; /* Proxy 0 addressing */ diff --git a/dts/src/arm64/ti/k3-j721e-som-p0.dtsi b/dts/src/arm64/ti/k3-j721e-som-p0.dtsi index 7680109ca6..8fa3361e5e 100644 --- a/dts/src/arm64/ti/k3-j721e-som-p0.dtsi +++ b/dts/src/arm64/ti/k3-j721e-som-p0.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; diff --git a/dts/src/arm64/ti/k3-j721e.dtsi b/dts/src/arm64/ti/k3-j721e.dtsi index 2f9a56d9b1..d035b61e0e 100644 --- a/dts/src/arm64/ti/k3-j721e.dtsi +++ b/dts/src/arm64/ti/k3-j721e.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for J721E SoC Family * - * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016-2019 Texas Instruments Incorporated - https://www.ti.com/ */ #include <dt-bindings/interrupt-controller/irq.h> |