summaryrefslogtreecommitdiffstats
path: root/dts/src/arm
diff options
context:
space:
mode:
Diffstat (limited to 'dts/src/arm')
-rw-r--r--dts/src/arm/at91sam9263.dtsi2
-rw-r--r--dts/src/arm/berlin2q-marvell-dmp.dts2
-rw-r--r--dts/src/arm/berlin2q.dtsi63
-rw-r--r--dts/src/arm/dra7-evm.dts10
-rw-r--r--dts/src/arm/exynos5250.dtsi2
-rw-r--r--dts/src/arm/exynos5420-arndale-octa.dts4
-rw-r--r--dts/src/arm/exynos5420.dtsi6
-rw-r--r--dts/src/arm/imx25.dtsi2
-rw-r--r--dts/src/arm/imx51-babbage.dts22
-rw-r--r--dts/src/arm/imx6qdl.dtsi4
-rw-r--r--dts/src/arm/imx6sx-sdb.dts15
-rw-r--r--dts/src/arm/ls1021a.dtsi1
-rw-r--r--dts/src/arm/omap3-n900.dts4
-rw-r--r--dts/src/arm/rk3288-evb.dtsi30
-rw-r--r--dts/src/arm/sama5d3xmb.dtsi2
-rw-r--r--dts/src/arm/sama5d4.dtsi2
-rw-r--r--dts/src/arm/ste-nomadik-nhk15.dts8
-rw-r--r--dts/src/arm/vf610-twr.dts15
18 files changed, 125 insertions, 69 deletions
diff --git a/dts/src/arm/at91sam9263.dtsi b/dts/src/arm/at91sam9263.dtsi
index 1467750..e8c6c60 100644
--- a/dts/src/arm/at91sam9263.dtsi
+++ b/dts/src/arm/at91sam9263.dtsi
@@ -953,6 +953,8 @@
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>;
+ clocks = <&lcd_clk>, <&lcd_clk>;
+ clock-names = "lcdc_clk", "hclk";
status = "disabled";
};
diff --git a/dts/src/arm/berlin2q-marvell-dmp.dts b/dts/src/arm/berlin2q-marvell-dmp.dts
index 28e7e20..a98ac1b 100644
--- a/dts/src/arm/berlin2q-marvell-dmp.dts
+++ b/dts/src/arm/berlin2q-marvell-dmp.dts
@@ -65,6 +65,8 @@
};
&sdhci2 {
+ broken-cd;
+ bus-width = <8>;
non-removable;
status = "okay";
};
diff --git a/dts/src/arm/berlin2q.dtsi b/dts/src/arm/berlin2q.dtsi
index 35253c9..e2f61f2 100644
--- a/dts/src/arm/berlin2q.dtsi
+++ b/dts/src/arm/berlin2q.dtsi
@@ -83,7 +83,8 @@
compatible = "mrvl,pxav3-mmc";
reg = <0xab1000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_SDIO1XIN>;
+ clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+ clock-names = "io", "core";
status = "disabled";
};
@@ -348,36 +349,6 @@
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
};
-
- gpio4: gpio@5000 {
- compatible = "snps,dw-apb-gpio";
- reg = <0x5000 0x400>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- porte: gpio-port@4 {
- compatible = "snps,dw-apb-gpio-port";
- gpio-controller;
- #gpio-cells = <2>;
- snps,nr-gpios = <32>;
- reg = <0>;
- };
- };
-
- gpio5: gpio@c000 {
- compatible = "snps,dw-apb-gpio";
- reg = <0xc000 0x400>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- portf: gpio-port@5 {
- compatible = "snps,dw-apb-gpio-port";
- gpio-controller;
- #gpio-cells = <2>;
- snps,nr-gpios = <32>;
- reg = <0>;
- };
- };
};
chip: chip-control@ea0000 {
@@ -466,6 +437,21 @@
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;
+ sm_gpio1: gpio@5000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x5000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portf: gpio-port@5 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+ };
+
i2c2: i2c@7000 {
compatible = "snps,designware-i2c";
#address-cells = <1>;
@@ -516,6 +502,21 @@
status = "disabled";
};
+ sm_gpio0: gpio@c000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xc000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porte: gpio-port@4 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+ };
+
sysctrl: pin-controller@d000 {
compatible = "marvell,berlin2q-system-ctrl";
reg = <0xd000 0x100>;
diff --git a/dts/src/arm/dra7-evm.dts b/dts/src/arm/dra7-evm.dts
index 10b725c..ad4118f 100644
--- a/dts/src/arm/dra7-evm.dts
+++ b/dts/src/arm/dra7-evm.dts
@@ -499,23 +499,23 @@
};
partition@5 {
label = "QSPI.u-boot-spl-os";
- reg = <0x00140000 0x00010000>;
+ reg = <0x00140000 0x00080000>;
};
partition@6 {
label = "QSPI.u-boot-env";
- reg = <0x00150000 0x00010000>;
+ reg = <0x001c0000 0x00010000>;
};
partition@7 {
label = "QSPI.u-boot-env.backup1";
- reg = <0x00160000 0x0010000>;
+ reg = <0x001d0000 0x0010000>;
};
partition@8 {
label = "QSPI.kernel";
- reg = <0x00170000 0x0800000>;
+ reg = <0x001e0000 0x0800000>;
};
partition@9 {
label = "QSPI.file-system";
- reg = <0x00970000 0x01690000>;
+ reg = <0x009e0000 0x01620000>;
};
};
};
diff --git a/dts/src/arm/exynos5250.dtsi b/dts/src/arm/exynos5250.dtsi
index 0a229fc..d75c89d 100644
--- a/dts/src/arm/exynos5250.dtsi
+++ b/dts/src/arm/exynos5250.dtsi
@@ -736,7 +736,7 @@
dp_phy: video-phy@10040720 {
compatible = "samsung,exynos5250-dp-video-phy";
- reg = <0x10040720 4>;
+ samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <0>;
};
diff --git a/dts/src/arm/exynos5420-arndale-octa.dts b/dts/src/arm/exynos5420-arndale-octa.dts
index aa7a7d7..db2c1c4 100644
--- a/dts/src/arm/exynos5420-arndale-octa.dts
+++ b/dts/src/arm/exynos5420-arndale-octa.dts
@@ -372,3 +372,7 @@
&usbdrd_dwc3_1 {
dr_mode = "host";
};
+
+&cci {
+ status = "disabled";
+};
diff --git a/dts/src/arm/exynos5420.dtsi b/dts/src/arm/exynos5420.dtsi
index 517e50f..6d38f8b 100644
--- a/dts/src/arm/exynos5420.dtsi
+++ b/dts/src/arm/exynos5420.dtsi
@@ -120,7 +120,7 @@
};
};
- cci@10d20000 {
+ cci: cci@10d20000 {
compatible = "arm,cci-400";
#address-cells = <1>;
#size-cells = <1>;
@@ -503,8 +503,8 @@
};
dp_phy: video-phy@10040728 {
- compatible = "samsung,exynos5250-dp-video-phy";
- reg = <0x10040728 4>;
+ compatible = "samsung,exynos5420-dp-video-phy";
+ samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <0>;
};
diff --git a/dts/src/arm/imx25.dtsi b/dts/src/arm/imx25.dtsi
index 58d3c3c..d238676 100644
--- a/dts/src/arm/imx25.dtsi
+++ b/dts/src/arm/imx25.dtsi
@@ -162,7 +162,7 @@
#size-cells = <0>;
compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
reg = <0x43fa4000 0x4000>;
- clocks = <&clks 62>, <&clks 62>;
+ clocks = <&clks 78>, <&clks 78>;
clock-names = "ipg", "per";
interrupts = <14>;
status = "disabled";
diff --git a/dts/src/arm/imx51-babbage.dts b/dts/src/arm/imx51-babbage.dts
index 56569ce..649befe 100644
--- a/dts/src/arm/imx51-babbage.dts
+++ b/dts/src/arm/imx51-babbage.dts
@@ -127,24 +127,12 @@
#address-cells = <1>;
#size-cells = <0>;
- reg_usbh1_vbus: regulator@0 {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usbh1reg>;
- reg = <0>;
- regulator-name = "usbh1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- reg_usbotg_vbus: regulator@1 {
+ reg_hub_reset: regulator@0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotgreg>;
- reg = <1>;
- regulator-name = "usbotg_vbus";
+ reg = <0>;
+ regulator-name = "hub_reset";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
@@ -176,6 +164,7 @@
reg = <0>;
clocks = <&clks IMX5_CLK_DUMMY>;
clock-names = "main_clk";
+ reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
};
};
};
@@ -419,7 +408,7 @@
&usbh1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
- vbus-supply = <&reg_usbh1_vbus>;
+ vbus-supply = <&reg_hub_reset>;
fsl,usbphy = <&usbh1phy>;
phy_type = "ulpi";
status = "okay";
@@ -429,7 +418,6 @@
dr_mode = "otg";
disable-over-current;
phy_type = "utmi_wide";
- vbus-supply = <&reg_usbotg_vbus>;
status = "okay";
};
diff --git a/dts/src/arm/imx6qdl.dtsi b/dts/src/arm/imx6qdl.dtsi
index 4fc03b7..2109d07 100644
--- a/dts/src/arm/imx6qdl.dtsi
+++ b/dts/src/arm/imx6qdl.dtsi
@@ -335,8 +335,8 @@
vpu: vpu@02040000 {
compatible = "cnm,coda960";
reg = <0x02040000 0x3c000>;
- interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
- <0 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "bit", "jpeg";
clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
<&clks IMX6QDL_CLK_MMDC_CH0_AXI>,
diff --git a/dts/src/arm/imx6sx-sdb.dts b/dts/src/arm/imx6sx-sdb.dts
index 1e6e5cc..8c1febd 100644
--- a/dts/src/arm/imx6sx-sdb.dts
+++ b/dts/src/arm/imx6sx-sdb.dts
@@ -159,13 +159,28 @@
pinctrl-0 = <&pinctrl_enet1>;
phy-supply = <&reg_enet_3v3>;
phy-mode = "rgmii";
+ phy-handle = <&ethphy1>;
status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy2: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
};
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rgmii";
+ phy-handle = <&ethphy2>;
status = "okay";
};
diff --git a/dts/src/arm/ls1021a.dtsi b/dts/src/arm/ls1021a.dtsi
index 657da14..c70bb27 100644
--- a/dts/src/arm/ls1021a.dtsi
+++ b/dts/src/arm/ls1021a.dtsi
@@ -142,6 +142,7 @@
scfg: scfg@1570000 {
compatible = "fsl,ls1021a-scfg", "syscon";
reg = <0x0 0x1570000 0x0 0x10000>;
+ big-endian;
};
clockgen: clocking@1ee1000 {
diff --git a/dts/src/arm/omap3-n900.dts b/dts/src/arm/omap3-n900.dts
index 53f3ca0..b550c41 100644
--- a/dts/src/arm/omap3-n900.dts
+++ b/dts/src/arm/omap3-n900.dts
@@ -700,11 +700,9 @@
};
};
+ /* Ethernet is on some early development boards and qemu */
ethernet@gpmc {
compatible = "smsc,lan91c94";
-
- status = "disabled";
-
interrupt-parent = <&gpio2>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */
diff --git a/dts/src/arm/rk3288-evb.dtsi b/dts/src/arm/rk3288-evb.dtsi
index 3e067dd..6194d67 100644
--- a/dts/src/arm/rk3288-evb.dtsi
+++ b/dts/src/arm/rk3288-evb.dtsi
@@ -155,6 +155,15 @@
};
&pinctrl {
+ pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
backlight {
bl_en: bl-en {
rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -173,6 +182,27 @@
};
};
+ sdmmc {
+ /*
+ * Default drive strength isn't enough to achieve even
+ * high-speed mode on EVB board so bump up to 8ma.
+ */
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+ };
+
usb {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/dts/src/arm/sama5d3xmb.dtsi b/dts/src/arm/sama5d3xmb.dtsi
index 49c10d3..77e0365 100644
--- a/dts/src/arm/sama5d3xmb.dtsi
+++ b/dts/src/arm/sama5d3xmb.dtsi
@@ -176,7 +176,7 @@
"Headphone Jack", "HPOUTR",
"IN2L", "Line In Jack",
"IN2R", "Line In Jack",
- "MICBIAS", "IN1L",
+ "Mic", "MICBIAS",
"IN1L", "Mic";
atmel,ssc-controller = <&ssc0>;
diff --git a/dts/src/arm/sama5d4.dtsi b/dts/src/arm/sama5d4.dtsi
index 1b0f30c..b94995d 100644
--- a/dts/src/arm/sama5d4.dtsi
+++ b/dts/src/arm/sama5d4.dtsi
@@ -1008,7 +1008,7 @@
pit: timer@fc068630 {
compatible = "atmel,at91sam9260-pit";
- reg = <0xfc068630 0xf>;
+ reg = <0xfc068630 0x10>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
clocks = <&h32ck>;
};
diff --git a/dts/src/arm/ste-nomadik-nhk15.dts b/dts/src/arm/ste-nomadik-nhk15.dts
index a8c00ee..3d0b875 100644
--- a/dts/src/arm/ste-nomadik-nhk15.dts
+++ b/dts/src/arm/ste-nomadik-nhk15.dts
@@ -25,11 +25,11 @@
stmpe2401_1 {
stmpe2401_1_nhk_mode: stmpe2401_1_nhk {
nhk_cfg1 {
- ste,pins = "GPIO76_B20"; // IRQ line
+ pins = "GPIO76_B20"; // IRQ line
ste,input = <0>;
};
nhk_cfg2 {
- ste,pins = "GPIO77_B8"; // reset line
+ pins = "GPIO77_B8"; // reset line
ste,output = <1>;
};
};
@@ -37,11 +37,11 @@
stmpe2401_2 {
stmpe2401_2_nhk_mode: stmpe2401_2_nhk {
nhk_cfg1 {
- ste,pins = "GPIO78_A8"; // IRQ line
+ pins = "GPIO78_A8"; // IRQ line
ste,input = <0>;
};
nhk_cfg2 {
- ste,pins = "GPIO79_C9"; // reset line
+ pins = "GPIO79_C9"; // reset line
ste,output = <1>;
};
};
diff --git a/dts/src/arm/vf610-twr.dts b/dts/src/arm/vf610-twr.dts
index a0f7621..f2b64b1 100644
--- a/dts/src/arm/vf610-twr.dts
+++ b/dts/src/arm/vf610-twr.dts
@@ -129,13 +129,28 @@
&fec0 {
phy-mode = "rmii";
+ phy-handle = <&ethphy0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec0>;
status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
};
&fec1 {
phy-mode = "rmii";
+ phy-handle = <&ethphy1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
status = "okay";