diff options
Diffstat (limited to 'dts/src/arm')
320 files changed, 12122 insertions, 3733 deletions
diff --git a/dts/src/arm/am335x-bone-common.dtsi b/dts/src/arm/am335x-bone-common.dtsi index 73b514dddf..9e5e75ea87 100644 --- a/dts/src/arm/am335x-bone-common.dtsi +++ b/dts/src/arm/am335x-bone-common.dtsi @@ -379,7 +379,7 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "mii"; }; @@ -396,6 +396,10 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &mmc1 { diff --git a/dts/src/arm/am335x-boneblack-common.dtsi b/dts/src/arm/am335x-boneblack-common.dtsi index 325daae402..e543c2bee8 100644 --- a/dts/src/arm/am335x-boneblack-common.dtsi +++ b/dts/src/arm/am335x-boneblack-common.dtsi @@ -7,6 +7,7 @@ */ #include <dt-bindings/display/tda998x.h> +#include <dt-bindings/interrupt-controller/irq.h> &ldo3_reg { regulator-min-microvolt = <1800000>; @@ -88,9 +89,11 @@ }; &i2c0 { - tda19988: tda19988 { + tda19988: tda19988@70 { compatible = "nxp,tda998x"; reg = <0x70>; + nxp,calib-gpios = <&gpio1 25 0>; + interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default", "off"; pinctrl-0 = <&nxp_hdmi_bonelt_pins>; diff --git a/dts/src/arm/am335x-chiliboard.dts b/dts/src/arm/am335x-chiliboard.dts index 59431b2359..9c2a947aac 100644 --- a/dts/src/arm/am335x-chiliboard.dts +++ b/dts/src/arm/am335x-chiliboard.dts @@ -140,10 +140,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rmii"; }; diff --git a/dts/src/arm/am335x-cm-t335.dts b/dts/src/arm/am335x-cm-t335.dts index 947c81b7aa..c4d3e1f1a9 100644 --- a/dts/src/arm/am335x-cm-t335.dts +++ b/dts/src/arm/am335x-cm-t335.dts @@ -486,10 +486,14 @@ status = "okay"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; }; diff --git a/dts/src/arm/am335x-evm.dts b/dts/src/arm/am335x-evm.dts index c87d01297a..98ec9c3e49 100644 --- a/dts/src/arm/am335x-evm.dts +++ b/dts/src/arm/am335x-evm.dts @@ -713,6 +713,7 @@ pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; + slaves = <1>; }; &davinci_mdio { @@ -720,15 +721,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; -}; -&cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; - phy-mode = "rgmii-txid"; + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; +&cpsw_emac0 { + phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; }; diff --git a/dts/src/arm/am335x-evmsk.dts b/dts/src/arm/am335x-evmsk.dts index bf1a40e45c..245868f58f 100644 --- a/dts/src/arm/am335x-evmsk.dts +++ b/dts/src/arm/am335x-evmsk.dts @@ -639,16 +639,24 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/am335x-igep0033.dtsi b/dts/src/arm/am335x-igep0033.dtsi index a5769a8f5f..55b4c94cfa 100644 --- a/dts/src/arm/am335x-igep0033.dtsi +++ b/dts/src/arm/am335x-igep0033.dtsi @@ -102,15 +102,24 @@ &davinci_mdio { status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rmii"; + }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rmii"; }; diff --git a/dts/src/arm/am335x-lxm.dts b/dts/src/arm/am335x-lxm.dts index 1d6c6fa703..481edcfaf1 100644 --- a/dts/src/arm/am335x-lxm.dts +++ b/dts/src/arm/am335x-lxm.dts @@ -317,13 +317,13 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <5>; + phy-handle = <ðphy0>; phy-mode = "rmii"; dual_emac_res_vlan = <2>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <4>; + phy-handle = <ðphy1>; phy-mode = "rmii"; dual_emac_res_vlan = <3>; }; @@ -345,6 +345,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@5 { + reg = <5>; + }; + + ethphy1: ethernet-phy@4 { + reg = <4>; + }; }; &mmc1 { diff --git a/dts/src/arm/am335x-moxa-uc-2100-common.dtsi b/dts/src/arm/am335x-moxa-uc-2100-common.dtsi new file mode 100644 index 0000000000..14f7819534 --- /dev/null +++ b/dts/src/arm/am335x-moxa-uc-2100-common.dtsi @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/ + * + * Authors: SZ Lin (林上智) <sz.lin@moxa.com> + * Wes Huang (黃淵河) <wes.huang@moxa.com> + * Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com> + */ + +#include "am33xx.dtsi" + +/ { + vbat: vbat-regulator { + compatible = "regulator-fixed"; + }; + + /* Power supply provides a fixed 3.3V @3A */ + vmmcsd_fixed: vmmcsd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + buttons: push_button { + compatible = "gpio-keys"; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + push_button_pins: pinmux_push_button { + pinctrl-single,pins = < + AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2_23 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + mmc1_pins_default: pinmux_mmc1_pins { + pinctrl-single,pins = < + /* eMMC */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad12.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad13.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad14.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad15.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad8.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad9.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad10.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad11.mmc1_dat7 */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + >; + }; + + spi0_pins: pinmux_spi0 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ + AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + >; + }; +}; + +&uart0 { + /* Console */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + status = "okay"; + clock-frequency = <400000>; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + pagesize = <16>; + reg = <0x50>; + }; + + rtc_wdt: rtc_wdt@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +/* Power */ +&vbat { + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +}; + +&mac { + pinctrl-names = "default"; + pinctrl-0 = <&cpsw_default>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&davinci_mdio_default>; + status = "okay"; +}; + +&cpsw_emac0 { + status = "okay"; +}; + +&cpsw_emac1 { + status = "okay"; +}; + +&phy_sel { + reg= <0x44e10650 0xf5>; + rmii-clock-ext; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&gpio0 { + ti,no-reset-on-init; +}; + +&mmc2 { + pinctrl-names = "default"; + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + pinctrl-0 = <&mmc1_pins_default>; + ti,non-removable; + status = "okay"; +}; + +&buttons { + pinctrl-names = "default"; + pinctrl-0 = <&push_button_pins>; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + label = "push_button"; + linux,code = <0x100>; + gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + }; +}; + +/* SPI Busses */ +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + + m25p80@0 { + compatible = "mx25l6405d"; + spi-max-frequency = <40000000>; + + reg = <0>; + spi-cpol; + spi-cpha; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* reg : The partition's offset and size within the mtd bank. */ + partitions@0 { + label = "MLO"; + reg = <0x0 0x80000>; + }; + + partitions@1 { + label = "U-Boot"; + reg = <0x80000 0x100000>; + }; + + partitions@2 { + label = "U-Boot Env"; + reg = <0x180000 0x40000>; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + + tpm_spi_tis@0 { + compatible = "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <500000>; + }; +}; diff --git a/dts/src/arm/am335x-moxa-uc-2101.dts b/dts/src/arm/am335x-moxa-uc-2101.dts new file mode 100644 index 0000000000..48aee6de4c --- /dev/null +++ b/dts/src/arm/am335x-moxa-uc-2101.dts @@ -0,0 +1,69 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/ + * + * Authors: SZ Lin (林上智) <sz.lin@moxa.com> + * Wes Huang (黃淵河) <wes.huang@moxa.com> + * Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com> + */ + +/dts-v1/; + +#include "am335x-moxa-uc-2100-common.dtsi" + +/ { + model = "Moxa UC-2101"; + compatible = "moxa,uc-2101", "ti,am33xx"; + + leds { + compatible = "gpio-leds"; + led1 { + label = "UC2100:GREEN:USER"; + gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mii1_refclk.rmii1_refclk */ + >; + }; + + spi1_pins: pinmux_spi1 { + pinctrl-single,pins = < + AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* ecap0_in_pwm0_out.spi1_sclk */ + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE4) /* uart1_ctsn.spi1_cs0 */ + AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_ctsn.spi1_d0 */ + AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* uart0_rtsn.spi1_d1 */ + >; + }; +}; + +&davinci_mdio { + phy0: ethernet-phy@4 { + reg = <4>; + }; +}; + +&cpsw_emac0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rmii"; +}; + +&cpsw_emac1 { + status = "disabled"; +}; diff --git a/dts/src/arm/am335x-moxa-uc-8100-me-t.dts b/dts/src/arm/am335x-moxa-uc-8100-me-t.dts index f82233cd18..5a58efc0c8 100644 --- a/dts/src/arm/am335x-moxa-uc-8100-me-t.dts +++ b/dts/src/arm/am335x-moxa-uc-8100-me-t.dts @@ -422,18 +422,26 @@ pinctrl-names = "default"; pinctrl-0 = <&davinci_mdio_default>; status = "okay"; + + ethphy0: ethernet-phy@4 { + reg = <4>; + }; + + ethphy1: ethernet-phy@5 { + reg = <5>; + }; }; &cpsw_emac0 { status = "okay"; - phy_id = <&davinci_mdio>, <4>; + phy-handle = <ðphy0>; phy-mode = "rmii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { status = "okay"; - phy_id = <&davinci_mdio>, <5>; + phy-handle = <ðphy1>; phy-mode = "rmii"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/am335x-nano.dts b/dts/src/arm/am335x-nano.dts index 946d7069f4..9c9143ed40 100644 --- a/dts/src/arm/am335x-nano.dts +++ b/dts/src/arm/am335x-nano.dts @@ -380,16 +380,24 @@ &davinci_mdio { status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "mii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "mii"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/am335x-osd3358-sm-red.dts b/dts/src/arm/am335x-osd3358-sm-red.dts index 4d969013f9..85cd1d0a73 100644 --- a/dts/src/arm/am335x-osd3358-sm-red.dts +++ b/dts/src/arm/am335x-osd3358-sm-red.dts @@ -161,7 +161,7 @@ invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/ }; - bmp280: pressure@78 { + bmp280: pressure@76 { compatible = "bosch,bmp280"; reg = <0x76>; }; @@ -424,7 +424,7 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <4>; + phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; }; @@ -441,6 +441,10 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@4 { + reg = <4>; + }; }; &mmc1 { diff --git a/dts/src/arm/am335x-pdu001.dts b/dts/src/arm/am335x-pdu001.dts index 1ad530a39a..6dd9d487aa 100644 --- a/dts/src/arm/am335x-pdu001.dts +++ b/dts/src/arm/am335x-pdu001.dts @@ -373,7 +373,7 @@ ti,pindir-d0-out-d1-in; status = "okay"; - cfaf240320a032t { + display-controller@0 { compatible = "orisetech,otm3225a"; reg = <0>; spi-max-frequency = <1000000>; @@ -533,16 +533,24 @@ pinctrl-names = "default"; pinctrl-0 = <&davinci_mdio_default>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "mii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "mii"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/am335x-pepper.dts b/dts/src/arm/am335x-pepper.dts index 9fb7426070..6be79b8349 100644 --- a/dts/src/arm/am335x-pepper.dts +++ b/dts/src/arm/am335x-pepper.dts @@ -265,13 +265,13 @@ /* Ethernet */ &cpsw_emac0 { status = "okay"; - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; }; &cpsw_emac1 { status = "okay"; - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rgmii"; }; @@ -279,6 +279,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &mac { diff --git a/dts/src/arm/am335x-sancloud-bbe.dts b/dts/src/arm/am335x-sancloud-bbe.dts index 7b8e7417a1..35527fdf56 100644 --- a/dts/src/arm/am335x-sancloud-bbe.dts +++ b/dts/src/arm/am335x-sancloud-bbe.dts @@ -103,10 +103,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; }; diff --git a/dts/src/arm/am335x-shc.dts b/dts/src/arm/am335x-shc.dts index 4f6a286ea2..1d925ed2b1 100644 --- a/dts/src/arm/am335x-shc.dts +++ b/dts/src/arm/am335x-shc.dts @@ -206,7 +206,6 @@ status = "okay"; slaves = <1>; cpsw_emac0: slave@4a100200 { - phy_id = <&davinci_mdio>, <0>; phy-mode = "mii"; phy-handle = <ðernetphy0>; }; diff --git a/dts/src/arm/am3517-evm-ui.dtsi b/dts/src/arm/am3517-evm-ui.dtsi new file mode 100644 index 0000000000..e841918c1c --- /dev/null +++ b/dts/src/arm/am3517-evm-ui.dtsi @@ -0,0 +1,220 @@ +/* + * Copyright (C) 2018 Logic PD, Inc - http://www.logicpd.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + codec1 { + compatible = "simple-audio-card"; + simple-audio-card,name = "tlv320aic23-hifi"; + + simple-audio-card,widgets = + "Microphone", "Mic In", + "Line", "Line In", + "Line", "Line Out"; + + simple-audio-card,routing = + "Line Out", "LOUT", + "Line Out", "ROUT", + "LLINEIN", "Line In", + "RLINEIN", "Line In", + "MICIN", "Mic In"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + + simple-audio-card,cpu { + sound-dai = <&mcbsp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic23_1>; + system-clock-frequency = <12000000>; + }; + }; + + codec2 { + compatible = "simple-audio-card"; + simple-audio-card,name = "tlv320aic23-hifi"; + + simple-audio-card,widgets = + "Microphone", "Mic In", + "Line", "Line In", + "Line", "Line Out"; + + simple-audio-card,routing = + "Line Out", "LOUT", + "Line Out", "ROUT", + "LLINEIN", "Line In", + "RLINEIN", "Line In", + "MICIN", "Mic In"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_master2>; + simple-audio-card,frame-master = <&sound_master2>; + + simple-audio-card,cpu { + sound-dai = <&mcbsp2>; + }; + + sound_master2: simple-audio-card,codec { + sound-dai = <&tlv320aic23_2>; + system-clock-frequency = <12000000>; + }; + }; + + expander-keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + record { + label = "Record"; + /* linux,code = <BTN_0>; */ + gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>; + }; + + play { + label = "Play"; + linux,code = <KEY_PLAY>; + gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>; + }; + + Stop { + label = "Stop"; + linux,code = <KEY_STOP>; + gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>; + }; + + fwd { + label = "FWD"; + linux,code = <KEY_FASTFORWARD>; + gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>; + }; + + rwd { + label = "RWD"; + linux,code = <KEY_REWIND>; + gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>; + }; + + shift { + label = "Shift"; + linux,code = <KEY_LEFTSHIFT>; + gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>; + }; + + Mode { + label = "Mode"; + linux,code = <BTN_MODE>; + gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>; + }; + + Menu { + label = "Menu"; + linux,code = <KEY_MENU>; + gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>; + }; + + Up { + label = "Up"; + linux,code = <KEY_UP>; + gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>; + }; + + Down { + label = "Down"; + linux,code = <KEY_DOWN>; + gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c2 { + /* Audio codecs */ + tlv320aic23_1: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + #sound-dai-cells= <0>; + status = "okay"; + }; + + tlv320aic23_2: codec@1b { + compatible = "ti,tlv320aic23"; + reg = <0x1b>; + #sound-dai-cells= <0>; + status = "okay"; + }; +}; + +&i2c3 { + /* Audio codecs */ + tlv320aic23_3: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + #sound-dai-cells= <0>; + status = "okay"; + }; + + /* GPIO Expanders */ + tca6416_2: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&vdd_io_reg>; + }; + + tca6416_3: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + vcc-supply = <&vdd_io_reg>; + }; + + /* TVP5146 Analog Video decoder input */ + tvp5146@5c { + compatible = "ti,tvp5146m2"; + reg = <0x5c>; + }; +}; + +&mcbsp1 { + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; +}; + +&mcbsp2 { + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; +}; + +&omap3_pmx_core { + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */ + OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */ + OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */ + OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */ + >; + }; +}; diff --git a/dts/src/arm/am3517-evm.dts b/dts/src/arm/am3517-evm.dts index 1d158cfda1..d4d33cd7ad 100644 --- a/dts/src/arm/am3517-evm.dts +++ b/dts/src/arm/am3517-evm.dts @@ -9,6 +9,7 @@ #include "am3517.dtsi" #include "am3517-som.dtsi" +#include "am3517-evm-ui.dtsi" #include <dt-bindings/input/input.h> / { diff --git a/dts/src/arm/am4372.dtsi b/dts/src/arm/am4372.dtsi index d4b7c59eec..a68e89dae7 100644 --- a/dts/src/arm/am4372.dtsi +++ b/dts/src/arm/am4372.dtsi @@ -1101,7 +1101,7 @@ }; }; - qspi: qspi@47900000 { + qspi: spi@47900000 { compatible = "ti,am4372-qspi"; reg = <0x47900000 0x100>, <0x30000000 0x4000000>; diff --git a/dts/src/arm/am437x-cm-t43.dts b/dts/src/arm/am437x-cm-t43.dts index bff5abe69b..4fcf647815 100644 --- a/dts/src/arm/am437x-cm-t43.dts +++ b/dts/src/arm/am437x-cm-t43.dts @@ -339,16 +339,24 @@ pinctrl-names = "default"; pinctrl-0 = <&davinci_mdio_default>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/am437x-gp-evm.dts b/dts/src/arm/am437x-gp-evm.dts index 5b97c20c5e..601bf4daae 100644 --- a/dts/src/arm/am437x-gp-evm.dts +++ b/dts/src/arm/am437x-gp-evm.dts @@ -831,10 +831,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; }; diff --git a/dts/src/arm/am437x-idk-evm.dts b/dts/src/arm/am437x-idk-evm.dts index 20132477a8..bb28540947 100644 --- a/dts/src/arm/am437x-idk-evm.dts +++ b/dts/src/arm/am437x-idk-evm.dts @@ -499,10 +499,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; }; diff --git a/dts/src/arm/am437x-sk-evm.dts b/dts/src/arm/am437x-sk-evm.dts index d4be3fd0b6..088cba09d3 100644 --- a/dts/src/arm/am437x-sk-evm.dts +++ b/dts/src/arm/am437x-sk-evm.dts @@ -799,16 +799,24 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@4 { + reg = <4>; + }; + + ethphy1: ethernet-phy@5 { + reg = <5>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <4>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <5>; + phy-handle = <ðphy1>; phy-mode = "rgmii"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/am43x-epos-evm.dts b/dts/src/arm/am43x-epos-evm.dts index 6502d33976..4ea753b3ee 100644 --- a/dts/src/arm/am43x-epos-evm.dts +++ b/dts/src/arm/am43x-epos-evm.dts @@ -575,10 +575,14 @@ pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; status = "okay"; + + ethphy0: ethernet-phy@16 { + reg = <16>; + }; }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <16>; + phy-handle = <ðphy0>; phy-mode = "rmii"; }; diff --git a/dts/src/arm/am571x-idk.dts b/dts/src/arm/am571x-idk.dts index d9a2049a1e..6432309b39 100644 --- a/dts/src/arm/am571x-idk.dts +++ b/dts/src/arm/am571x-idk.dts @@ -64,6 +64,82 @@ linux,default-trigger = "mmc0"; }; }; + + idk-leds { + status = "disabled"; + compatible = "gpio-leds"; + red0-led { + label = "idk:red0"; + gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green0-led { + label = "idk:green0"; + gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue0-led { + label = "idk:blue0"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red1-led { + label = "idk:red1"; + gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green1-led { + label = "idk:green1"; + gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue1-led { + label = "idk:blue1"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red2-led { + label = "idk:red2"; + gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green2-led { + label = "idk:green2"; + gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue2-led { + label = "idk:blue2"; + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red3-led { + label = "idk:red3"; + gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green3-led { + label = "idk:green3"; + gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue3-led { + label = "idk:blue3"; + gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; }; &extcon_usb2 { @@ -71,6 +147,10 @@ vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>; }; +&sn65hvs882 { + load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; +}; + &mailbox5 { status = "okay"; mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { @@ -114,7 +194,3 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>; }; - -&cpu0 { - vdd-supply = <&smps12_reg>; -}; diff --git a/dts/src/arm/am572x-idk-common.dtsi b/dts/src/arm/am572x-idk-common.dtsi index 784639ddf4..a064f13b38 100644 --- a/dts/src/arm/am572x-idk-common.dtsi +++ b/dts/src/arm/am572x-idk-common.dtsi @@ -55,6 +55,82 @@ linux,default-trigger = "mmc0"; }; }; + + idk-leds { + status = "disabled"; + compatible = "gpio-leds"; + red0-led { + label = "idk:red0"; + gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green0-led { + label = "idk:green0"; + gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue0-led { + label = "idk:blue0"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red1-led { + label = "idk:red1"; + gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green1-led { + label = "idk:green1"; + gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue1-led { + label = "idk:blue1"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red2-led { + label = "idk:red2"; + gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green2-led { + label = "idk:green2"; + gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue2-led { + label = "idk:blue2"; + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red3-led { + label = "idk:red3"; + gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + green3-led { + label = "idk:green3"; + gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + blue3-led { + label = "idk:blue3"; + gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; }; &extcon_usb2 { diff --git a/dts/src/arm/am572x-idk.dts b/dts/src/arm/am572x-idk.dts index 3ef9111d0e..b2fb6e097b 100644 --- a/dts/src/arm/am572x-idk.dts +++ b/dts/src/arm/am572x-idk.dts @@ -36,7 +36,3 @@ pinctrl-1 = <&mmc2_pins_hs>; pinctrl-2 = <&mmc2_pins_ddr_rev20>; }; - -&cpu0 { - vdd-supply = <&smps12_reg>; -}; diff --git a/dts/src/arm/am57xx-cl-som-am57x.dts b/dts/src/arm/am57xx-cl-som-am57x.dts index 203266f884..4748ce8747 100644 --- a/dts/src/arm/am57xx-cl-som-am57x.dts +++ b/dts/src/arm/am57xx-cl-som-am57x.dts @@ -518,7 +518,7 @@ }; /* touch controller */ - ads7846@0 { + touchscreen@1 { pinctrl-names = "default"; pinctrl-0 = <&ads7846_pins>; @@ -558,13 +558,13 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <0>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <1>; }; @@ -573,6 +573,14 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_pins_default>; pinctrl-1 = <&davinci_mdio_pins_sleep>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; }; &usb2_phy1 { diff --git a/dts/src/arm/am57xx-idk-common.dtsi b/dts/src/arm/am57xx-idk-common.dtsi index c9063ffca5..f7bd264589 100644 --- a/dts/src/arm/am57xx-idk-common.dtsi +++ b/dts/src/arm/am57xx-idk-common.dtsi @@ -372,17 +372,27 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rgmii"; dual_emac_res_vlan = <2>; }; +&davinci_mdio { + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &usb2_phy1 { phy-supply = <&ldousb_reg>; }; @@ -478,3 +488,7 @@ }; }; }; + +&cpu0 { + vdd-supply = <&smps12_reg>; +}; diff --git a/dts/src/arm/arm-realview-eb.dtsi b/dts/src/arm/arm-realview-eb.dtsi index a917cf8825..0e4c7c4c8c 100644 --- a/dts/src/arm/arm-realview-eb.dtsi +++ b/dts/src/arm/arm-realview-eb.dtsi @@ -371,7 +371,7 @@ clock-names = "uartclk", "apb_pclk"; }; - ssp: ssp@1000d000 { + ssp: spi@1000d000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x1000d000 0x1000>; clocks = <&sspclk>, <&pclk>; diff --git a/dts/src/arm/arm-realview-pb1176.dts b/dts/src/arm/arm-realview-pb1176.dts index f935b72d3d..f2a1d25eb6 100644 --- a/dts/src/arm/arm-realview-pb1176.dts +++ b/dts/src/arm/arm-realview-pb1176.dts @@ -380,7 +380,7 @@ clock-names = "apb_pclk"; }; - pb1176_ssp: ssp@1010b000 { + pb1176_ssp: spi@1010b000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x1010b000 0x1000>; interrupt-parent = <&intc_dc1176>; diff --git a/dts/src/arm/arm-realview-pb11mp.dts b/dts/src/arm/arm-realview-pb11mp.dts index 36203288de..7f9cbdf33a 100644 --- a/dts/src/arm/arm-realview-pb11mp.dts +++ b/dts/src/arm/arm-realview-pb11mp.dts @@ -523,7 +523,7 @@ clock-names = "uartclk", "apb_pclk"; }; - ssp@1000d000 { + spi@1000d000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x1000d000 0x1000>; interrupt-parent = <&intc_pb11mp>; diff --git a/dts/src/arm/arm-realview-pbx.dtsi b/dts/src/arm/arm-realview-pbx.dtsi index 10868ba327..a5676697ff 100644 --- a/dts/src/arm/arm-realview-pbx.dtsi +++ b/dts/src/arm/arm-realview-pbx.dtsi @@ -362,7 +362,7 @@ clock-names = "uartclk", "apb_pclk"; }; - ssp: ssp@1000d000 { + ssp: spi@1000d000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x1000d000 0x1000>; clocks = <&sspclk>, <&pclk>; diff --git a/dts/src/arm/armada-385-db-88f6820-amc.dts b/dts/src/arm/armada-385-db-88f6820-amc.dts new file mode 100644 index 0000000000..7881df3b28 --- /dev/null +++ b/dts/src/arm/armada-385-db-88f6820-amc.dts @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Device Tree file for Marvell Armada 385 AMC board + * (DB-88F6820-AMC) + * + * Copyright (C) 2017 Allied Telesis Labs + */ + +/dts-v1/; +#include "armada-385.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Marvell Armada 385 AMC"; + compatible = "marvell,a385-db-amc", "marvell,armada385", "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + spi1 = &spi1; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&uart0 { + /* + * Exported on the micro USB connector CON3 + * through an FTDI + */ + + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + + +ð0 { + pinctrl-names = "default"; + /* + * The Reference Clock 0 is used to provide a + * clock to the PHY + */ + pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +ð2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "sgmii"; +}; + +&usb0 { + status = "okay"; +}; + + + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + phy0: ethernet-phy@1 { + reg = <1>; + }; + + phy1: ethernet-phy@0 { + reg = <0>; + }; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + reg = <0x00000000 0x40000000>; + label = "user"; + }; + }; + }; +}; + +&pciec { + status = "okay"; +}; + +&pcie1 { + /* Port 0, Lane 0 */ + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + reg = <0x00000000 0x00100000>; + label = "u-boot"; + }; + partition@100000 { + reg = <0x00100000 0x00040000>; + label = "u-boot-env"; + }; + }; + }; +}; + +&refclk { + clock-frequency = <20000000>; +}; diff --git a/dts/src/arm/armada-388-clearfog.dtsi b/dts/src/arm/armada-388-clearfog.dtsi index 7c6ad2afb0..1b0d0680c8 100644 --- a/dts/src/arm/armada-388-clearfog.dtsi +++ b/dts/src/arm/armada-388-clearfog.dtsi @@ -48,7 +48,7 @@ &clearfog_sdhci_cd_pins>; pinctrl-names = "default"; status = "okay"; - vmmc = <®_3p3v>; + vmmc-supply = <®_3p3v>; wp-inverted; }; diff --git a/dts/src/arm/armada-xp-98dx3236.dtsi b/dts/src/arm/armada-xp-98dx3236.dtsi index 8d708cc224..59753470cd 100644 --- a/dts/src/arm/armada-xp-98dx3236.dtsi +++ b/dts/src/arm/armada-xp-98dx3236.dtsi @@ -189,7 +189,7 @@ }; }; - nand: nand@d0000 { + nand_controller: nand-controller@d0000 { clocks = <&dfx_coredivclk 0>; }; @@ -243,7 +243,7 @@ ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>; pp0: packet-processor@0 { - compatible = "marvell,prestera-98dx3236"; + compatible = "marvell,prestera-98dx3236", "marvell,prestera"; reg = <0 0x4000000>; interrupts = <33>, <34>, <35>; dfx = <&dfx>; diff --git a/dts/src/arm/armada-xp-98dx3336.dtsi b/dts/src/arm/armada-xp-98dx3336.dtsi index 2f5fc67dd6..1d9d8a8ea6 100644 --- a/dts/src/arm/armada-xp-98dx3336.dtsi +++ b/dts/src/arm/armada-xp-98dx3336.dtsi @@ -35,5 +35,5 @@ }; &pp0 { - compatible = "marvell,prestera-98dx3336"; + compatible = "marvell,prestera-98dx3336", "marvell,prestera"; }; diff --git a/dts/src/arm/armada-xp-98dx4251.dtsi b/dts/src/arm/armada-xp-98dx4251.dtsi index 7a9e883988..48ffdc72bf 100644 --- a/dts/src/arm/armada-xp-98dx4251.dtsi +++ b/dts/src/arm/armada-xp-98dx4251.dtsi @@ -49,6 +49,6 @@ }; &pp0 { - compatible = "marvell,prestera-98dx4251"; + compatible = "marvell,prestera-98dx4251", "marvell,prestera"; interrupts = <33>, <34>, <35>, <36>; }; diff --git a/dts/src/arm/armada-xp-db-dxbc2.dts b/dts/src/arm/armada-xp-db-dxbc2.dts index f42fc6118b..8a3aa616bb 100644 --- a/dts/src/arm/armada-xp-db-dxbc2.dts +++ b/dts/src/arm/armada-xp-db-dxbc2.dts @@ -68,14 +68,18 @@ status = "okay"; }; -&nand { +&nand_controller { status = "okay"; - label = "pxa3xx_nand-0"; - num-cs = <1>; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + }; }; &sdio { diff --git a/dts/src/arm/armada-xp-db-xc3-24g4xg.dts b/dts/src/arm/armada-xp-db-xc3-24g4xg.dts index 8432f517e3..df04805061 100644 --- a/dts/src/arm/armada-xp-db-xc3-24g4xg.dts +++ b/dts/src/arm/armada-xp-db-xc3-24g4xg.dts @@ -67,14 +67,18 @@ status = "okay"; }; -&nand { +&nand_controller { status = "okay"; - label = "pxa3xx_nand-0"; - num-cs = <1>; - marvell,nand-keep-config; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + }; }; &spi0 { diff --git a/dts/src/arm/aspeed-bmc-arm-stardragon4800-rep2.dts b/dts/src/arm/aspeed-bmc-arm-stardragon4800-rep2.dts new file mode 100644 index 0000000000..bdfd8c9f3a --- /dev/null +++ b/dts/src/arm/aspeed-bmc-arm-stardragon4800-rep2.dts @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "HXT StarDragon 4800 REP2 AST2520"; + compatible = "hxt,stardragon4800-rep2-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 7>; + }; + + leds { + compatible = "gpio-leds"; + + system_fault1 { + label = "System_fault1"; + gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>; + }; + + system_fault2 { + label = "System_fault2"; + gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_LOW>; + }; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + flash@0 { + status = "okay"; + }; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2ck_default + &pinctrl_spi2miso_default + &pinctrl_spi2mosi_default + &pinctrl_spi2cs0_default>; +}; + +&uart3 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; + current-speed = <115200>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii2_default>; + use-ncsi; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + tmp421@1e { + compatible = "ti,tmp421"; + reg = <0x1e>; + }; + tmp421@2a { + compatible = "ti,tmp421"; + reg = <0x2a>; + }; + tmp421@1c { + compatible = "ti,tmp421"; + reg = <0x1c>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + tmp421@1f { + compatible = "ti,tmp421"; + reg = <0x1f>; + }; + nvt210@4c { + compatible = "nvt210"; + reg = <0x4c>; + }; + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + pagesize = <128>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; + + pca9641@70 { + compatible = "nxp,pca9641"; + reg = <0x70>; + i2c-arb { + #address-cells = <1>; + #size-cells = <0>; + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + dps650ab@58 { + compatible = "dps650ab"; + reg = <0x58>; + }; + }; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&gpio { + pin_gpio_c7 { + gpio-hog; + gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "BIOS_SPI_MUX_S"; + }; + pin_gpio_d1 { + gpio-hog; + gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PHY2_RESET_N"; + }; +}; diff --git a/dts/src/arm/aspeed-bmc-facebook-tiogapass.dts b/dts/src/arm/aspeed-bmc-facebook-tiogapass.dts new file mode 100644 index 0000000000..f8e7b71af7 --- /dev/null +++ b/dts/src/arm/aspeed-bmc-facebook-tiogapass.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Facebook Inc. +// Author: Vijay Khemka <vijaykhemka@fb.com> +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Facebook TiogaPass BMC"; + compatible = "facebook,tiogapass-bmc", "aspeed,ast2500"; + aliases { + serial0 = &uart1; + serial4 = &uart5; + }; + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart1 { + // Host Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart5 { + // BMC Console + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&i2c0 { + status = "okay"; + //Airmax Conn B, CPU0 PIROM, CPU1 PIROM +}; + +&i2c1 { + status = "okay"; + //X24 Riser +}; + +&i2c2 { + status = "okay"; + // Mezz Management SMBus +}; + +&i2c3 { + status = "okay"; + // SMBus to Board ID EEPROM +}; + +&i2c4 { + status = "okay"; + // BMC Debug Header +}; + +&i2c5 { + status = "okay"; + // CPU Voltage regulators +}; + +&i2c6 { + status = "okay"; + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; + tmp421@4e { + compatible = "ti,tmp421"; + reg = <0x4e>; + }; + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + pagesize = <32>; + }; +}; + +&i2c7 { + status = "okay"; + //HSC, AirMax Conn A +}; + +&i2c8 { + status = "okay"; + //Mezz Sensor SMBus +}; + +&i2c9 { + status = "okay"; + //USB Debug Connector +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; +}; diff --git a/dts/src/arm/aspeed-bmc-quanta-q71l.dts b/dts/src/arm/aspeed-bmc-quanta-q71l.dts index 76aa6ea1f9..385c0f4b69 100644 --- a/dts/src/arm/aspeed-bmc-quanta-q71l.dts +++ b/dts/src/arm/aspeed-bmc-quanta-q71l.dts @@ -7,6 +7,25 @@ model = "Quanta Q71L BMC"; compatible = "quanta,q71l-bmc", "aspeed,ast2400"; + aliases { + i2c14 = &i2c_pcie2; + i2c15 = &i2c_pcie3; + i2c16 = &i2c_pcie6; + i2c17 = &i2c_pcie7; + i2c18 = &i2c_pcie1; + i2c19 = &i2c_pcie4; + i2c20 = &i2c_pcie5; + i2c21 = &i2c_pcie8; + i2c22 = &i2c_pcie9; + i2c23 = &i2c_pcie10; + i2c24 = &i2c_ssd1; + i2c25 = &i2c_ssd2; + i2c26 = &i2c_psu4; + i2c27 = &i2c_psu1; + i2c28 = &i2c_psu3; + i2c29 = &i2c_psu2; + }; + chosen { stdout-path = &uart5; bootargs = "console=ttyS4,115200 earlyprintk"; @@ -93,6 +112,10 @@ &pinctrl_ddcclk_default &pinctrl_ddcdat_default>; }; +&ibt { + status = "okay"; +}; + &lpc_snoop { status = "okay"; snoop-ports = <0x80>; @@ -299,24 +322,44 @@ #address-cells = <1>; #size-cells = <0>; reg = <0>; + + psu@59 { + compatible = "pmbus"; + reg = <0x59>; + }; }; i2c_psu1: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; + + psu@58 { + compatible = "pmbus"; + reg = <0x58>; + }; }; i2c_psu3: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; + + psu@58 { + compatible = "pmbus"; + reg = <0x58>; + }; }; i2c_psu2: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; + + psu@59 { + compatible = "pmbus"; + reg = <0x59>; + }; }; }; @@ -345,6 +388,10 @@ status = "okay"; }; +&adc { + status = "okay"; +}; + &pwm_tacho { status = "okay"; diff --git a/dts/src/arm/aspeed-g4.dtsi b/dts/src/arm/aspeed-g4.dtsi index b23a983f95..69f6b9d2e7 100644 --- a/dts/src/arm/aspeed-g4.dtsi +++ b/dts/src/arm/aspeed-g4.dtsi @@ -350,7 +350,7 @@ status = "disabled"; }; - i2c: i2c@1e78a000 { + i2c: bus@1e78a000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/aspeed-g5.dtsi b/dts/src/arm/aspeed-g5.dtsi index 87fdc146ff..d107459fc0 100644 --- a/dts/src/arm/aspeed-g5.dtsi +++ b/dts/src/arm/aspeed-g5.dtsi @@ -410,7 +410,7 @@ status = "disabled"; }; - i2c: i2c@1e78a000 { + i2c: bus@1e78a000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/at91-dvk_su60_somc.dtsi b/dts/src/arm/at91-dvk_su60_somc.dtsi index bb86f17ed5..21876da7c4 100644 --- a/dts/src/arm/at91-dvk_su60_somc.dtsi +++ b/dts/src/arm/at91-dvk_su60_somc.dtsi @@ -70,9 +70,9 @@ &i2c1 { status = "okay"; - eeprom@87 { + eeprom@57 { compatible = "giantec,gt24c32a", "atmel,24c32"; - reg = <87>; + reg = <0x57>; pagesize = <32>; }; }; diff --git a/dts/src/arm/at91-dvk_su60_somc_lcm.dtsi b/dts/src/arm/at91-dvk_su60_somc_lcm.dtsi index 4b9176dc5d..df0f0cc575 100644 --- a/dts/src/arm/at91-dvk_su60_somc_lcm.dtsi +++ b/dts/src/arm/at91-dvk_su60_somc_lcm.dtsi @@ -59,9 +59,9 @@ &i2c1 { status = "okay"; - ft5426@56 { + ft5426@38 { compatible = "focaltech,ft5426", "edt,edt-ft5406"; - reg = <56>; + reg = <0x38>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lcd_ctp_int>; diff --git a/dts/src/arm/at91-nattis-2-natte-2.dts b/dts/src/arm/at91-nattis-2-natte-2.dts index af9f38456d..911d2c7c15 100644 --- a/dts/src/arm/at91-nattis-2-natte-2.dts +++ b/dts/src/arm/at91-nattis-2-natte-2.dts @@ -16,46 +16,6 @@ compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - ahb { - apb { - pinctrl@fffff200 { - nattis { - pinctrl_usba_vbus: usba_vbus { - atmel,pins = - <AT91_PIOD 28 - AT91_PERIPH_GPIO - AT91_PINCTRL_DEGLITCH>; - }; - - pinctrl_mmc0_cd: mmc0_cd { - atmel,pins = - <AT91_PIOD 5 - AT91_PERIPH_GPIO - AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - - pinctrl_lcd_prlud0: lcd_prlud0 { - atmel,pins = - <AT91_PIOA 21 - AT91_PERIPH_GPIO - AT91_PINCTRL_OUTPUT_VAL(0)>; - }; - - pinctrl_lcd_hipow0: lcd_hipow0 { - atmel,pins = - <AT91_PIOA 23 - AT91_PERIPH_GPIO - AT91_PINCTRL_OUTPUT_VAL(0)>; - }; - }; - }; - - watchdog@fffffe40 { - status = "okay"; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -103,10 +63,29 @@ }; panel: panel { - compatible = "sharp,lq150x1lg11"; + compatible = "sharp,lq150x1lg11", "panel-lvds"; + backlight = <&panel_bl>; power-supply = <&panel_reg>; + width-mm = <304>; + height-mm = <228>; + + data-mapping = "jeida-18"; + + panel-timing { + // 1024x768 @ 60Hz (typical) + clock-frequency = <50000000 65000000 80000000>; + hactive = <1024>; + vactive = <768>; + hfront-porch = <48 88 88>; + hback-porch = <96 168 168>; + hsync-len = <32 64 64>; + vsync-len = <3 13 74>; + vfront-porch = <3 13 74>; + vback-porch = <3 12 74>; + }; + port { panel_input: endpoint { remote-endpoint = <&lvds_encoder_output>; @@ -115,7 +94,10 @@ }; lvds-encoder { - compatible = "lvds-encoder"; + compatible = "ti,ds90c185", "lvds-encoder"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>; ports { #address-cells = <1>; @@ -159,6 +141,36 @@ }; }; +&pinctrl { + nattis { + pinctrl_usba_vbus: usba_vbus { + atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO + AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = <AT91_PIOD 5 AT91_PERIPH_GPIO + AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_lvds_prlud0: lvds_prlud0 { + atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + + pinctrl_lvds_hipow0: lvds_hipow0 { + atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -195,14 +207,12 @@ hlcdc-display-controller { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_base - &pinctrl_lcd_rgb565 - &pinctrl_lcd_prlud0 - &pinctrl_lcd_hipow0>; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>; port@0 { hlcdc_output: endpoint { remote-endpoint = <&lvds_encoder_input>; + bus-width = <16>; }; }; }; @@ -219,6 +229,7 @@ reg = <0>; bus-width = <4>; cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>; + cd-inverted; }; }; diff --git a/dts/src/arm/at91-sama5d27_som1_ek.dts b/dts/src/arm/at91-sama5d27_som1_ek.dts index e86e0c00eb..363a43d774 100644 --- a/dts/src/arm/at91-sama5d27_som1_ek.dts +++ b/dts/src/arm/at91-sama5d27_som1_ek.dts @@ -283,6 +283,13 @@ status = "okay"; }; + adc: adc@fc030000 { + vddana-supply = <&vddana>; + vref-supply = <&advref>; + + status = "disabled"; + }; + pinctrl@fc038000 { pinctrl_can1_default: can1_default { @@ -549,4 +556,39 @@ linux,default-trigger = "heartbeat"; }; }; + + vddin_3v3: fixed-regulator-vddin_3v3 { + compatible = "regulator-fixed"; + + regulator-name = "VDDIN_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + status = "okay"; + }; + + vddana: fixed-regulator-vddana { + compatible = "regulator-fixed"; + + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vddin_3v3>; + status = "okay"; + }; + + advref: fixed-regulator-advref { + compatible = "regulator-fixed"; + + regulator-name = "advref"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vddana>; + status = "okay"; + }; }; diff --git a/dts/src/arm/at91-sama5d2_ptc_ek.dts b/dts/src/arm/at91-sama5d2_ptc_ek.dts index 3b1baa8605..2214bfe7aa 100644 --- a/dts/src/arm/at91-sama5d2_ptc_ek.dts +++ b/dts/src/arm/at91-sama5d2_ptc_ek.dts @@ -92,13 +92,13 @@ reg = <0x40000 0xc0000>; }; - bootloaderenv@0x100000 { - label = "bootloader env"; + bootloaderenvred@0x100000 { + label = "bootloader env redundant"; reg = <0x100000 0x40000>; }; - bootloaderenvred@0x140000 { - label = "bootloader env redundant"; + bootloaderenv@0x140000 { + label = "bootloader env"; reg = <0x140000 0x40000>; }; diff --git a/dts/src/arm/at91-sama5d2_xplained.dts b/dts/src/arm/at91-sama5d2_xplained.dts index fcc85d70f3..518e2b095c 100644 --- a/dts/src/arm/at91-sama5d2_xplained.dts +++ b/dts/src/arm/at91-sama5d2_xplained.dts @@ -281,6 +281,12 @@ status = "okay"; }; + i2s0: i2s@f8050000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s0_default>; + status = "disabled"; /* conflict with can0 */ + }; + can0: can@f8054000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can0_default>; @@ -424,6 +430,24 @@ bias-disable; }; + pinctrl_i2s0_default: i2s0_default { + pinmux = <PIN_PC1__I2SC0_CK>, + <PIN_PC2__I2SC0_MCK>, + <PIN_PC3__I2SC0_WS>, + <PIN_PC4__I2SC0_DI0>, + <PIN_PC5__I2SC0_DO0>; + bias-disable; + }; + + pinctrl_i2s1_default: i2s1_default { + pinmux = <PIN_PA15__I2SC1_CK>, + <PIN_PA14__I2SC1_MCK>, + <PIN_PA16__I2SC1_WS>, + <PIN_PA17__I2SC1_DI0>, + <PIN_PA18__I2SC1_DO0>; + bias-disable; + }; + pinctrl_key_gpio_default: key_gpio_default { pinmux = <PIN_PB9__GPIO>; bias-pull-up; @@ -546,6 +570,12 @@ status = "okay"; }; + i2s1: i2s@fc04c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s1_default>; + status = "disabled"; /* conflict with spi0, sdmmc1 */ + }; + can1: can@fc050000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_default>; diff --git a/dts/src/arm/at91-sama5d3_xplained.dts b/dts/src/arm/at91-sama5d3_xplained.dts index 02c1d2958d..322a744e43 100644 --- a/dts/src/arm/at91-sama5d3_xplained.dts +++ b/dts/src/arm/at91-sama5d3_xplained.dts @@ -297,12 +297,17 @@ bootloader@40000 { label = "bootloader"; - reg = <0x40000 0x80000>; + reg = <0x40000 0xc0000>; }; - bootloaderenv@c0000 { + bootloaderenvred@100000 { + label = "bootloader env redundant"; + reg = <0x100000 0x40000>; + }; + + bootloaderenv@140000 { label = "bootloader env"; - reg = <0xc0000 0xc0000>; + reg = <0x140000 0x40000>; }; dtb@180000 { diff --git a/dts/src/arm/at91-sama5d4_xplained.dts b/dts/src/arm/at91-sama5d4_xplained.dts index 4b7c762d5f..43aef56ac7 100644 --- a/dts/src/arm/at91-sama5d4_xplained.dts +++ b/dts/src/arm/at91-sama5d4_xplained.dts @@ -232,12 +232,17 @@ bootloader@40000 { label = "bootloader"; - reg = <0x40000 0x80000>; + reg = <0x40000 0xc0000>; }; - bootloaderenv@c0000 { + bootloaderenvred@100000 { + label = "bootloader env redundant"; + reg = <0x100000 0x40000>; + }; + + bootloaderenv@140000 { label = "bootloader env"; - reg = <0xc0000 0xc0000>; + reg = <0x140000 0x40000>; }; dtb@180000 { @@ -252,7 +257,7 @@ rootfs@800000 { label = "rootfs"; - reg = <0x800000 0x0f800000>; + reg = <0x800000 0x1f800000>; }; }; }; diff --git a/dts/src/arm/at91-tse850-3.dts b/dts/src/arm/at91-tse850-3.dts index 2fbec69d9c..fe8876eaf9 100644 --- a/dts/src/arm/at91-tse850-3.dts +++ b/dts/src/arm/at91-tse850-3.dts @@ -16,25 +16,6 @@ compatible = "axentia,tse850v3", "axentia,linea", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - ahb { - apb { - pinctrl@fffff200 { - tse850 { - pinctrl_usba_vbus: usba-vbus { - atmel,pins = - <AT91_PIOC 31 - AT91_PERIPH_GPIO - AT91_PINCTRL_DEGLITCH>; - }; - }; - }; - - watchdog@fffffe40 { - status = "okay"; - }; - }; - }; - sck: oscillator { compatible = "fixed-clock"; @@ -253,6 +234,19 @@ }; }; +&pinctrl { + tse850 { + pinctrl_usba_vbus: usba-vbus { + atmel,pins = <AT91_PIOC 31 AT91_PERIPH_GPIO + AT91_PINCTRL_DEGLITCH>; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + &usart0 { status = "okay"; diff --git a/dts/src/arm/at91-vinco.dts b/dts/src/arm/at91-vinco.dts index 1be9889a2b..430277291e 100644 --- a/dts/src/arm/at91-vinco.dts +++ b/dts/src/arm/at91-vinco.dts @@ -128,7 +128,7 @@ i2c2: i2c@f8024000 { status = "okay"; - rtc1: rtc@64 { + rtc1: rtc@32 { compatible = "epson,rx8900"; reg = <0x32>; }; diff --git a/dts/src/arm/at91sam9260ek.dts b/dts/src/arm/at91sam9260ek.dts index d2b865f602..07d1b571e6 100644 --- a/dts/src/arm/at91sam9260ek.dts +++ b/dts/src/arm/at91sam9260ek.dts @@ -127,7 +127,7 @@ spi0: spi@fffc8000 { cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; - mtd_dataflash@0 { + mtd_dataflash@1 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <50000000>; reg = <1>; diff --git a/dts/src/arm/at91sam9261ek.dts b/dts/src/arm/at91sam9261ek.dts index a29fc04940..a57f2d435d 100644 --- a/dts/src/arm/at91sam9261ek.dts +++ b/dts/src/arm/at91sam9261ek.dts @@ -160,7 +160,7 @@ spi-max-frequency = <15000000>; }; - tsc2046@0 { + tsc2046@2 { reg = <2>; compatible = "ti,ads7843"; interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>; diff --git a/dts/src/arm/at91sam9g20ek_common.dtsi b/dts/src/arm/at91sam9g20ek_common.dtsi index 71df3adfc7..ec1f17ab67 100644 --- a/dts/src/arm/at91sam9g20ek_common.dtsi +++ b/dts/src/arm/at91sam9g20ek_common.dtsi @@ -109,7 +109,7 @@ spi0: spi@fffc8000 { cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; - mtd_dataflash@0 { + mtd_dataflash@1 { compatible = "atmel,at45", "atmel,dataflash"; spi-max-frequency = <50000000>; reg = <1>; diff --git a/dts/src/arm/at91sam9g45.dtsi b/dts/src/arm/at91sam9g45.dtsi index 1ee25a475b..d16db1fa7e 100644 --- a/dts/src/arm/at91sam9g45.dtsi +++ b/dts/src/arm/at91sam9g45.dtsi @@ -570,7 +570,7 @@ }; }; - uart1 { + usart1 { pinctrl_usart1: usart1-0 { atmel,pins = <AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE diff --git a/dts/src/arm/at91sam9x5cm.dtsi b/dts/src/arm/at91sam9x5cm.dtsi index 4908ee07e6..c4cc9cc945 100644 --- a/dts/src/arm/at91sam9x5cm.dtsi +++ b/dts/src/arm/at91sam9x5cm.dtsi @@ -85,12 +85,22 @@ uboot@40000 { label = "u-boot"; - reg = <0x40000 0x80000>; + reg = <0x40000 0xc0000>; }; - ubootenv@c0000 { + ubootenvred@100000 { + label = "U-Boot Env Redundant"; + reg = <0x100000 0x40000>; + }; + + ubootenv@140000 { label = "U-Boot Env"; - reg = <0xc0000 0x140000>; + reg = <0x140000 0x40000>; + }; + + dtb@180000 { + label = "device tree"; + reg = <0x180000 0x80000>; }; kernel@200000 { @@ -100,7 +110,7 @@ rootfs@800000 { label = "rootfs"; - reg = <0x800000 0x1f800000>; + reg = <0x800000 0x0f800000>; }; }; }; diff --git a/dts/src/arm/bcm-hr2.dtsi b/dts/src/arm/bcm-hr2.dtsi index 3084a7c957..e4d4973128 100644 --- a/dts/src/arm/bcm-hr2.dtsi +++ b/dts/src/arm/bcm-hr2.dtsi @@ -216,7 +216,7 @@ reg = <0x33000 0x14>; }; - qspi: qspi@27200 { + qspi: spi@27200 { compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; reg = <0x027200 0x184>, <0x027000 0x124>, diff --git a/dts/src/arm/bcm-nsp.dtsi b/dts/src/arm/bcm-nsp.dtsi index 09ba850463..2fd111d9d5 100644 --- a/dts/src/arm/bcm-nsp.dtsi +++ b/dts/src/arm/bcm-nsp.dtsi @@ -273,7 +273,7 @@ brcm,nand-has-wp; }; - qspi: qspi@27200 { + qspi: spi@27200 { compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; reg = <0x027200 0x184>, <0x027000 0x124>, @@ -377,7 +377,36 @@ srab: srab@36000 { compatible = "brcm,nsp-srab"; - reg = <0x36000 0x1000>; + reg = <0x36000 0x1000>, + <0x3f308 0x8>, + <0x3f410 0xc>; + reg-names = "srab", "mux_config", "sgmii"; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "link_state_p0", + "link_state_p1", + "link_state_p2", + "link_state_p3", + "link_state_p4", + "link_state_p5", + "link_state_p7", + "link_state_p8", + "phy", + "ts", + "imp_sleep_timer_p5", + "imp_sleep_timer_p7", + "imp_sleep_timer_p8"; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/bcm2837-rpi-cm3-io3.dts b/dts/src/arm/bcm2837-rpi-cm3-io3.dts new file mode 100644 index 0000000000..6c8233a36d --- /dev/null +++ b/dts/src/arm/bcm2837-rpi-cm3-io3.dts @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2837-rpi-cm3.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,3-compute-module", "brcm,bcm2837"; + model = "Raspberry Pi Compute Module 3 IO board V3.0"; +}; + +&gpio { + /* + * This is based on the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "GPIO0", + "GPIO1", + "GPIO2", + "GPIO3", + "GPIO4", + "GPIO5", + "GPIO6", + "GPIO7", + "GPIO8", + "GPIO9", + "GPIO10", + "GPIO11", + "GPIO12", + "GPIO13", + "GPIO14", + "GPIO15", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "GPIO32", + "GPIO33", + "GPIO34", + "GPIO35", + "GPIO36", + "GPIO37", + "GPIO38", + "GPIO39", + "GPIO40", + "GPIO41", + "GPIO42", + "GPIO43", + "GPIO44", + "GPIO45", + "GPIO46", + "GPIO47", + /* Used by eMMC */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0>; +}; + +&hdmi { + hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_gpio14>; + status = "okay"; +}; diff --git a/dts/src/arm/bcm2837-rpi-cm3.dtsi b/dts/src/arm/bcm2837-rpi-cm3.dtsi new file mode 100644 index 0000000000..7b7ab6aea9 --- /dev/null +++ b/dts/src/arm/bcm2837-rpi-cm3.dtsi @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; +#include "bcm2837.dtsi" +#include "bcm2835-rpi.dtsi" + +/ { + memory { + reg = <0 0x40000000>; + }; + + reg_3v3: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_1v8: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; +}; + +&firmware { + expgpio: gpio { + compatible = "raspberrypi,firmware-gpio"; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "HDMI_HPD_N", + "EMMC_EN_N", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; + status = "okay"; + }; +}; + +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + bus-width = <4>; + vmmc-supply = <®_3v3>; + vqmmc-supply = <®_1v8>; + status = "okay"; +}; diff --git a/dts/src/arm/bcm283x-rpi-lan7515.dtsi b/dts/src/arm/bcm283x-rpi-lan7515.dtsi index 9403da0990..70bece63f9 100644 --- a/dts/src/arm/bcm283x-rpi-lan7515.dtsi +++ b/dts/src/arm/bcm283x-rpi-lan7515.dtsi @@ -1,4 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/net/microchip-lan78xx.h> + / { aliases { ethernet0 = ðernet; @@ -21,6 +23,18 @@ ethernet: ethernet@1 { compatible = "usb424,7800"; reg = <1>; + + mdio { + #address-cells = <0x1>; + #size-cells = <0x0>; + eth_phy: ethernet-phy@1 { + reg = <1>; + microchip,led-modes = < + LAN78XX_LINK_1000_ACTIVITY + LAN78XX_LINK_10_100_ACTIVITY + >; + }; + }; }; }; }; diff --git a/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts b/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts index 5f663f848d..189cc3dcd6 100644 --- a/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts +++ b/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts @@ -94,6 +94,34 @@ &spi_nor { status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + os-image@100000 { + label = "os-image"; + reg = <0x040000 0x200000>; + compatible = "brcm,trx"; + }; + + rootfs@240000 { + label = "rootfs"; + reg = <0x240000 0xc00000>; + }; + + nvram@ff0000 { + label = "nvram"; + reg = <0xff0000 0x010000>; + }; + }; }; &usb2 { diff --git a/dts/src/arm/bcm4709-asus-rt-ac87u.dts b/dts/src/arm/bcm4709-asus-rt-ac87u.dts index 2033411240..4cb10f88a9 100644 --- a/dts/src/arm/bcm4709-asus-rt-ac87u.dts +++ b/dts/src/arm/bcm4709-asus-rt-ac87u.dts @@ -66,3 +66,34 @@ &usb3_phy { status = "okay"; }; + +&nandcs { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + nvram@80000 { + label = "nvram"; + reg = <0x00080000 0x00180000>; + }; + + firmware@200000 { + label = "firmware"; + reg = <0x00200000 0x07cc0000>; + compatible = "brcm,trx"; + }; + + asus@7ec0000 { + label = "asus"; + reg = <0x07ec0000 0x00140000>; + read-only; + }; + }; +}; diff --git a/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts b/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts index c7143a9daa..b527d2ff98 100644 --- a/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts +++ b/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts @@ -103,6 +103,34 @@ &spi_nor { status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boot@0 { + label = "boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + os-image@100000 { + label = "os-image"; + reg = <0x040000 0x200000>; + compatible = "brcm,trx"; + }; + + rootfs@240000 { + label = "rootfs"; + reg = <0x240000 0xc00000>; + }; + + nvram@ff0000 { + label = "nvram"; + reg = <0xff0000 0x010000>; + }; + }; }; &usb3_phy { diff --git a/dts/src/arm/bcm5301x-nand-cs0.dtsi b/dts/src/arm/bcm5301x-nand-cs0.dtsi index e5a2d62daf..925a7c9ce5 100644 --- a/dts/src/arm/bcm5301x-nand-cs0.dtsi +++ b/dts/src/arm/bcm5301x-nand-cs0.dtsi @@ -12,6 +12,10 @@ reg = <0>; #address-cells = <1>; #size-cells = <1>; + + partitions { + compatible = "brcm,bcm947xx-cfe-partitions"; + }; }; }; }; diff --git a/dts/src/arm/bcm5301x.dtsi b/dts/src/arm/bcm5301x.dtsi index bc607d11ee..7a5c188c26 100644 --- a/dts/src/arm/bcm5301x.dtsi +++ b/dts/src/arm/bcm5301x.dtsi @@ -475,8 +475,11 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; - linux,part-probe = "ofpart", "bcm47xxpart"; status = "disabled"; + + partitions { + compatible = "brcm,bcm947xx-cfe-partitions"; + }; }; }; diff --git a/dts/src/arm/bcm958625hr.dts b/dts/src/arm/bcm958625hr.dts index ea3fc194f8..a53a2f629d 100644 --- a/dts/src/arm/bcm958625hr.dts +++ b/dts/src/arm/bcm958625hr.dts @@ -58,6 +58,24 @@ open-source; priority = <200>; }; + + /* Hardware I2C block cannot do more than 63 bytes per transfer, + * which would prevent reading from a SFP's EEPROM (256 byte). + */ + i2c1: i2c { + compatible = "i2c-gpio"; + sda-gpios = <&gpioa 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpioa 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + }; + + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>; + los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>; + tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpioa 26 GPIO_ACTIVE_HIGH>; + }; }; &amac0 { @@ -210,6 +228,14 @@ reg = <4>; }; + port@5 { + label = "sfp"; + phy-mode = "sgmii"; + reg = <5>; + sfp = <&sfp>; + managed = "in-band-status"; + }; + port@8 { ethernet = <&amac2>; label = "cpu"; diff --git a/dts/src/arm/da850-evm.dts b/dts/src/arm/da850-evm.dts index f9b7579058..a3c9b34672 100644 --- a/dts/src/arm/da850-evm.dts +++ b/dts/src/arm/da850-evm.dts @@ -221,6 +221,12 @@ gpio-controller; #gpio-cells = <2>; }; + tca6416_bb: gpio@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; }; &wdt { diff --git a/dts/src/arm/da850-lego-ev3.dts b/dts/src/arm/da850-lego-ev3.dts index c4729d0e6c..66fcadf0ba 100644 --- a/dts/src/arm/da850-lego-ev3.dts +++ b/dts/src/arm/da850-lego-ev3.dts @@ -352,7 +352,8 @@ compatible = "ti,ads7957"; reg = <3>; #io-channel-cells = <1>; - spi-max-frequency = <10000000>; + spi-max-frequency = <1000000>; + ti,spi-wdelay = <63>; vref-supply = <&adc_ref>; }; }; diff --git a/dts/src/arm/dm8148-evm.dts b/dts/src/arm/dm8148-evm.dts index 85d7b5148b..2d201719ba 100644 --- a/dts/src/arm/dm8148-evm.dts +++ b/dts/src/arm/dm8148-evm.dts @@ -27,15 +27,25 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rgmii"; }; +&davinci_mdio { + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &gpmc { ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ diff --git a/dts/src/arm/dm8148-t410.dts b/dts/src/arm/dm8148-t410.dts index c46a227b54..63301bcacf 100644 --- a/dts/src/arm/dm8148-t410.dts +++ b/dts/src/arm/dm8148-t410.dts @@ -36,15 +36,25 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rgmii"; }; +&davinci_mdio { + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &mmc1 { status = "disabled"; }; diff --git a/dts/src/arm/dove-cubox.dts b/dts/src/arm/dove-cubox.dts index 580e3cbcfb..3e1584e787 100644 --- a/dts/src/arm/dove-cubox.dts +++ b/dts/src/arm/dove-cubox.dts @@ -87,7 +87,7 @@ status = "okay"; clock-frequency = <100000>; - si5351: clock-generator { + si5351: clock-generator@60 { compatible = "silabs,si5351a-msop"; reg = <0x60>; #address-cells = <1>; diff --git a/dts/src/arm/dove.dtsi b/dts/src/arm/dove.dtsi index 4a0a5115b2..250ad0535e 100644 --- a/dts/src/arm/dove.dtsi +++ b/dts/src/arm/dove.dtsi @@ -155,7 +155,7 @@ 0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */ 0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */ - spi0: spi-ctrl@10600 { + spi0: spi@10600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; @@ -168,7 +168,7 @@ status = "disabled"; }; - i2c: i2c-ctrl@11000 { + i2c: i2c@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; @@ -218,7 +218,7 @@ status = "disabled"; }; - spi1: spi-ctrl@14600 { + spi1: spi@14600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/dra62x-j5eco-evm.dts b/dts/src/arm/dra62x-j5eco-evm.dts index 31b824ad5d..906aedde04 100644 --- a/dts/src/arm/dra62x-j5eco-evm.dts +++ b/dts/src/arm/dra62x-j5eco-evm.dts @@ -27,15 +27,25 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <0>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; + phy-handle = <ðphy1>; phy-mode = "rgmii"; }; +&davinci_mdio { + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &gpmc { ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */ diff --git a/dts/src/arm/dra7-evm.dts b/dts/src/arm/dra7-evm.dts index 6ed5f91562..cc079064a2 100644 --- a/dts/src/arm/dra7-evm.dts +++ b/dts/src/arm/dra7-evm.dts @@ -512,17 +512,27 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <3>; + phy-handle = <ðphy1>; phy-mode = "rgmii"; dual_emac_res_vlan = <2>; }; +&davinci_mdio { + ethphy0: ethernet-phy@2 { + reg = <2>; + }; + + ethphy1: ethernet-phy@3 { + reg = <3>; + }; +}; + &dcan1 { status = "ok"; pinctrl-names = "default", "sleep", "active"; diff --git a/dts/src/arm/dra7.dtsi b/dts/src/arm/dra7.dtsi index a0ddf497e8..7ce24b282d 100644 --- a/dts/src/arm/dra7.dtsi +++ b/dts/src/arm/dra7.dtsi @@ -336,6 +336,7 @@ <0 0 0 2 &pcie1_intc 2>, <0 0 0 3 &pcie1_intc 3>, <0 0 0 4 &pcie1_intc 4>; + ti,syscon-unaligned-access = <&scm_conf1 0x14 1>; status = "disabled"; pcie1_intc: interrupt-controller { interrupt-controller; @@ -354,7 +355,7 @@ ti,hwmods = "pcie1"; phys = <&pcie1_phy>; phy-names = "pcie-phy0"; - ti,syscon-unaligned-access = <&scm_conf1 0x14 2>; + ti,syscon-unaligned-access = <&scm_conf1 0x14 1>; status = "disabled"; }; }; @@ -387,6 +388,7 @@ <0 0 0 2 &pcie2_intc 2>, <0 0 0 3 &pcie2_intc 3>, <0 0 0 4 &pcie2_intc 4>; + ti,syscon-unaligned-access = <&scm_conf1 0x14 2>; pcie2_intc: interrupt-controller { interrupt-controller; #address-cells = <0>; @@ -1369,7 +1371,7 @@ status = "disabled"; }; - qspi: qspi@4b300000 { + qspi: spi@4b300000 { compatible = "ti,dra7xxx-qspi"; reg = <0x4b300000 0x100>, <0x5c000000 0x4000000>; diff --git a/dts/src/arm/dra71-evm.dts b/dts/src/arm/dra71-evm.dts index c471bf3277..82cc7ec37a 100644 --- a/dts/src/arm/dra71-evm.dts +++ b/dts/src/arm/dra71-evm.dts @@ -203,13 +203,13 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <3>; + phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/dra72-evm-revc.dts b/dts/src/arm/dra72-evm-revc.dts index bf588d0072..fafc2a4d7b 100644 --- a/dts/src/arm/dra72-evm-revc.dts +++ b/dts/src/arm/dra72-evm-revc.dts @@ -61,13 +61,13 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <3>; + phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/dra72-evm.dts b/dts/src/arm/dra72-evm.dts index c572693b16..154b0a0ceb 100644 --- a/dts/src/arm/dra72-evm.dts +++ b/dts/src/arm/dra72-evm.dts @@ -51,10 +51,16 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <3>; + phy-handle = <ðphy0>; phy-mode = "rgmii"; }; +&davinci_mdio { + ethphy0: ethernet-phy@3 { + reg = <3>; + }; +}; + &mmc1 { pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104"; pinctrl-0 = <&mmc1_pins_default>; diff --git a/dts/src/arm/dra76-evm.dts b/dts/src/arm/dra76-evm.dts index 5a46163d46..8a57895fd8 100644 --- a/dts/src/arm/dra76-evm.dts +++ b/dts/src/arm/dra76-evm.dts @@ -375,13 +375,13 @@ }; &cpsw_emac0 { - phy_id = <&davinci_mdio>, <2>; + phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <1>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <3>; + phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; }; diff --git a/dts/src/arm/exynos3250-artik5.dtsi b/dts/src/arm/exynos3250-artik5.dtsi index 620b50c19e..7c22cbf6f3 100644 --- a/dts/src/arm/exynos3250-artik5.dtsi +++ b/dts/src/arm/exynos3250-artik5.dtsi @@ -69,6 +69,8 @@ compatible = "samsung,s2mps14-pmic"; interrupt-parent = <&gpx3>; interrupts = <5 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&s2mps14_irq>; reg = <0x66>; s2mps14_osc: clocks { @@ -350,6 +352,11 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>; samsung,pin-val = <1>; }; + + s2mps14_irq: s2mps14-irq { + samsung,pins = "gpx3-5"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; }; &rtc { diff --git a/dts/src/arm/exynos4210-origen.dts b/dts/src/arm/exynos4210-origen.dts index 2ab99f9f3d..dd9ec05eb0 100644 --- a/dts/src/arm/exynos4210-origen.dts +++ b/dts/src/arm/exynos4210-origen.dts @@ -151,6 +151,8 @@ reg = <0x66>; interrupt-parent = <&gpx0>; interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max8997_irq>; max8997,pmic-buck1-dvs-voltage = <1350000>; max8997,pmic-buck2-dvs-voltage = <1100000>; @@ -288,6 +290,13 @@ }; }; +&pinctrl_1 { + max8997_irq: max8997-irq { + samsung,pins = "gpx0-3", "gpx0-4"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + &sdhci_0 { bus-width = <4>; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; diff --git a/dts/src/arm/exynos4210-trats.dts b/dts/src/arm/exynos4210-trats.dts index 6f1d76cb79..f9bbc6315c 100644 --- a/dts/src/arm/exynos4210-trats.dts +++ b/dts/src/arm/exynos4210-trats.dts @@ -385,6 +385,12 @@ regulator-max-microvolt = <1800000>; }; + tflash_reg: LDO17 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vddq_reg: LDO21 { regulator-name = "VDDQ_M1M2_1.2V"; regulator-min-microvolt = <1200000>; @@ -452,6 +458,15 @@ status = "okay"; }; +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&tflash_reg>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &serial_0 { status = "okay"; }; diff --git a/dts/src/arm/exynos4210-universal_c210.dts b/dts/src/arm/exynos4210-universal_c210.dts index 4e6ff97e1e..5c3d98654f 100644 --- a/dts/src/arm/exynos4210-universal_c210.dts +++ b/dts/src/arm/exynos4210-universal_c210.dts @@ -310,6 +310,9 @@ pmic@66 { compatible = "national,lp3974"; + interrupts-extended = <&gpx0 7 0>, <&gpx2 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&lp3974_irq>; reg = <0x66>; max8998,pmic-buck1-default-dvs-idx = <0>; @@ -503,6 +506,11 @@ }; &pinctrl_1 { + lp3974_irq: lp3974-irq { + samsung,pins = "gpx0-7", "gpx2-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; + hdmi_hpd: hdmi-hpd { samsung,pins = "gpx3-7"; samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; @@ -537,8 +545,7 @@ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; pinctrl-names = "default"; vmmc-supply = <&ldo5_reg>; - cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/dts/src/arm/exynos4412-midas.dtsi b/dts/src/arm/exynos4412-midas.dtsi index c0476c2909..aed2f2e2b0 100644 --- a/dts/src/arm/exynos4412-midas.dtsi +++ b/dts/src/arm/exynos4412-midas.dtsi @@ -1269,8 +1269,7 @@ &sdhci_2 { bus-width = <4>; - cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>; pinctrl-names = "default"; vmmc-supply = <&ldo21_reg>; diff --git a/dts/src/arm/exynos4412-odroid-common.dtsi b/dts/src/arm/exynos4412-odroid-common.dtsi index a09e46c9db..2caa3132f3 100644 --- a/dts/src/arm/exynos4412-odroid-common.dtsi +++ b/dts/src/arm/exynos4412-odroid-common.dtsi @@ -539,8 +539,7 @@ pinctrl-names = "default"; vmmc-supply = <&ldo21_reg>; vqmmc-supply = <&ldo4_reg>; - cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/dts/src/arm/exynos5250-arndale.dts b/dts/src/arm/exynos5250-arndale.dts index 7a8a5c5570..7d1f2dc590 100644 --- a/dts/src/arm/exynos5250-arndale.dts +++ b/dts/src/arm/exynos5250-arndale.dts @@ -71,6 +71,17 @@ }; }; + panel: panel { + compatible = "boe,hv070wsa-100"; + power-supply = <&vcc_3v3_reg>; + enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; + port { + panel_ep: endpoint { + remote-endpoint = <&bridge_out_ep>; + }; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -97,6 +108,30 @@ reg = <2>; regulator-name = "hdmi-en"; }; + + vcc_1v2_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vcc_1v8_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_3v3_reg: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; }; fixed-rate-clocks { @@ -119,6 +154,32 @@ cpu0-supply = <&buck2_reg>; }; +&dsi_0 { + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + samsung,pll-clock-frequency = <24000000>; + samsung,burst-clock-frequency = <320000000>; + samsung,esc-clock-frequency = <10000000>; + status = "okay"; + + bridge@0 { + reg = <0>; + compatible = "toshiba,tc358764"; + vddc-supply = <&vcc_1v2_reg>; + vddio-supply = <&vcc_1v8_reg>; + vddlvds-supply = <&vcc_3v3_reg>; + reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + bridge_out_ep: endpoint { + remote-endpoint = <&panel_ep>; + }; + }; + }; +}; + &dp { status = "okay"; samsung,color-space = <0>; @@ -149,9 +210,11 @@ }; &hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; status = "okay"; - ddc = <&i2c_2>; - hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>; + ddc = <&i2c_ddc>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; vdd_osc-supply = <&ldo10_reg>; vdd_pll-supply = <&ldo8_reg>; vdd-supply = <&ldo8_reg>; @@ -168,6 +231,8 @@ reg = <0x66>; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&s5m8767_irq>; vinb1-supply = <&main_dc_reg>; vinb2-supply = <&main_dc_reg>; @@ -452,13 +517,6 @@ }; }; -&i2c_2 { - status = "okay"; - /* used by HDMI DDC */ - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; -}; - &i2c_3 { status = "okay"; @@ -535,6 +593,13 @@ cap-sd-highspeed; }; +&pinctrl_0 { + s5m8767_irq: s5m8767-irq { + samsung,pins = "gpx3-2"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; +}; + &rtc { status = "okay"; }; @@ -547,3 +612,22 @@ status = "okay"; samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>; }; + +&soc { + /* + * For unknown reasons HDMI-DDC does not work with Exynos I2C + * controllers. Lets use software I2C over GPIO pins as a workaround. + */ + i2c_ddc: i2c-gpio { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_gpio_bus>; + status = "okay"; + compatible = "i2c-gpio"; + gpios = <&gpa0 6 0 /* sda */ + &gpa0 7 0 /* scl */ + >; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; +}; diff --git a/dts/src/arm/exynos5250-pinctrl.dtsi b/dts/src/arm/exynos5250-pinctrl.dtsi index 6ff6dea29d..d31a68672b 100644 --- a/dts/src/arm/exynos5250-pinctrl.dtsi +++ b/dts/src/arm/exynos5250-pinctrl.dtsi @@ -225,6 +225,12 @@ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + i2c2_gpio_bus: i2c2-gpio-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + uart2_data: uart2-data { samsung,pins = "gpa1-0", "gpa1-1"; samsung,pin-function = <EXYNOS_PIN_FUNC_2>; @@ -593,6 +599,11 @@ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; }; + + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + }; }; &pinctrl_1 { diff --git a/dts/src/arm/exynos5250-snow-rev5.dts b/dts/src/arm/exynos5250-snow-rev5.dts index 0348b1c49a..7cbfc6f1f4 100644 --- a/dts/src/arm/exynos5250-snow-rev5.dts +++ b/dts/src/arm/exynos5250-snow-rev5.dts @@ -20,6 +20,14 @@ samsung,model = "Snow-I2S-MAX98090"; samsung,audio-codec = <&max98090>; + + cpu { + sound-dai = <&i2s0 0>; + }; + + codec { + sound-dai = <&max98090 0>, <&hdmi>; + }; }; }; @@ -31,6 +39,9 @@ interrupt-parent = <&gpx0>; pinctrl-names = "default"; pinctrl-0 = <&max98090_irq>; + clocks = <&pmu_system_controller 0>; + clock-names = "mclk"; + #sound-dai-cells = <1>; }; }; diff --git a/dts/src/arm/exynos5250.dtsi b/dts/src/arm/exynos5250.dtsi index da163a40af..5044f754e6 100644 --- a/dts/src/arm/exynos5250.dtsi +++ b/dts/src/arm/exynos5250.dtsi @@ -54,62 +54,109 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0>; - clock-frequency = <1700000000>; clocks = <&clock CLK_ARM_CLK>; clock-names = "cpu"; - clock-latency = <140000>; - - operating-points = < - 1700000 1300000 - 1600000 1250000 - 1500000 1225000 - 1400000 1200000 - 1300000 1150000 - 1200000 1125000 - 1100000 1100000 - 1000000 1075000 - 900000 1050000 - 800000 1025000 - 700000 1012500 - 600000 1000000 - 500000 975000 - 400000 950000 - 300000 937500 - 200000 925000 - >; + operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; /* min followed by max */ }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; - clock-frequency = <1700000000>; clocks = <&clock CLK_ARM_CLK>; clock-names = "cpu"; - clock-latency = <140000>; - - operating-points = < - 1700000 1300000 - 1600000 1250000 - 1500000 1225000 - 1400000 1200000 - 1300000 1150000 - 1200000 1125000 - 1100000 1100000 - 1000000 1075000 - 900000 1050000 - 800000 1025000 - 700000 1012500 - 600000 1000000 - 500000 975000 - 400000 950000 - 300000 937500 - 200000 925000 - >; + operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; /* min followed by max */ }; }; + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <925000>; + clock-latency-ns = <140000>; + }; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <937500>; + clock-latency-ns = <140000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <950000>; + clock-latency-ns = <140000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <975000>; + clock-latency-ns = <140000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <140000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <1012500>; + clock-latency-ns = <140000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <140000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1050000>; + clock-latency-ns = <140000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1075000>; + clock-latency-ns = <140000>; + opp-suspend; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <140000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1125000>; + clock-latency-ns = <140000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1150000>; + clock-latency-ns = <140000>; + }; + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1200000>; + clock-latency-ns = <140000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1225000>; + clock-latency-ns = <140000>; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <140000>; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <1300000>; + clock-latency-ns = <140000>; + }; + }; + soc: soc { sysram@2020000 { compatible = "mmio-sram"; @@ -756,6 +803,27 @@ #phy-cells = <0>; }; + mipi_phy: video-phy@10040710 { + compatible = "samsung,s5pv210-mipi-video-phy"; + reg = <0x10040710 0x100>; + #phy-cells = <1>; + syscon = <&pmu_system_controller>; + }; + + dsi_0: dsi@14500000 { + compatible = "samsung,exynos4210-mipi-dsi"; + reg = <0x14500000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + samsung,power-domain = <&pd_disp1>; + phys = <&mipi_phy 3>; + phy-names = "dsim"; + clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI1>; + clock-names = "bus_clk", "sclk_mipi"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + adc: adc@12d10000 { compatible = "samsung,exynos-adc-v1"; reg = <0x12D10000 0x100>; diff --git a/dts/src/arm/exynos5410-odroidxu.dts b/dts/src/arm/exynos5410-odroidxu.dts index a2046f5f99..434a7591ff 100644 --- a/dts/src/arm/exynos5410-odroidxu.dts +++ b/dts/src/arm/exynos5410-odroidxu.dts @@ -530,7 +530,7 @@ samsung,dw-mshc-sdr-timing = <0 4>; samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4 &sd2_wp>; bus-width = <4>; cap-sd-highspeed; vmmc-supply = <&ldo21_reg>; @@ -545,6 +545,14 @@ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>; }; + sd2_wp: sd2-wp { + samsung,pins = "gpm5-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_2>; + /* Pin is floating so be sure to disable write-protect */ + samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>; + }; + pmic_dvs_3: pmic-dvs-3 { samsung,pins = "gpx0-0"; samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; diff --git a/dts/src/arm/exynos5420-peach-pit.dts b/dts/src/arm/exynos5420-peach-pit.dts index 57c2332bf2..f78db6809c 100644 --- a/dts/src/arm/exynos5420-peach-pit.dts +++ b/dts/src/arm/exynos5420-peach-pit.dts @@ -153,7 +153,7 @@ &clock_audss { assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-parents = <&clock CLK_FOUT_EPLL>; + assigned-clock-parents = <&clock CLK_MAU_EPLL>; }; &cpu0 { @@ -312,6 +312,7 @@ regulator-name = "vdd_1v35"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -333,6 +334,7 @@ regulator-name = "vdd_2v"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -343,6 +345,7 @@ regulator-name = "vdd_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; diff --git a/dts/src/arm/exynos5422-odroid-core.dtsi b/dts/src/arm/exynos5422-odroid-core.dtsi index 2f4f40882d..2fac4baf1e 100644 --- a/dts/src/arm/exynos5422-odroid-core.dtsi +++ b/dts/src/arm/exynos5422-odroid-core.dtsi @@ -154,6 +154,13 @@ regulator-always-on; }; + ldo2_reg: LDO2 { + regulator-name = "vdd_ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + ldo3_reg: LDO3 { regulator-name = "vddq_mmc0"; regulator-min-microvolt = <1800000>; @@ -216,10 +223,10 @@ }; ldo12_reg: LDO12 { + /* Unused */ regulator-name = "vdd_ldo12"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2375000>; }; ldo13_reg: LDO13 { @@ -228,6 +235,13 @@ regulator-max-microvolt = <2800000>; }; + ldo14_reg: LDO14 { + /* Unused */ + regulator-name = "vdd_ldo14"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo15_reg: LDO15 { regulator-name = "vdd_ldo15"; regulator-min-microvolt = <3300000>; @@ -236,10 +250,10 @@ }; ldo16_reg: LDO16 { + /* Unused */ regulator-name = "vdd_ldo16"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; }; ldo17_reg: LDO17 { @@ -261,20 +275,139 @@ regulator-max-microvolt = <2800000>; }; - ldo24_reg: LDO24 { - regulator-name = "tsp_io"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; + ldo20_reg: LDO20 { + /* Unused */ + regulator-name = "vdd_ldo20"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo21_reg: LDO21 { + /* Unused */ + regulator-name = "vdd_ldo21"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo22_reg: LDO22 { + /* Unused */ + regulator-name = "vdd_ldo22"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2375000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "vdd_mifs"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-always-on; }; + ldo24_reg: LDO24 { + /* Unused */ + regulator-name = "vdd_ldo24"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo25_reg: LDO25 { + /* Unused */ + regulator-name = "vdd_ldo25"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + ldo26_reg: LDO26 { + /* Used on XU3, XU3-Lite and XU4 */ regulator-name = "vdd_ldo26"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "vdd_g3ds"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; regulator-always-on; }; + ldo28_reg: LDO28 { + /* Used on XU3 */ + regulator-name = "vdd_ldo28"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo29_reg: LDO29 { + /* Unused */ + regulator-name = "vdd_ldo29"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo30_reg: LDO30 { + /* Unused */ + regulator-name = "vdd_ldo30"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo31_reg: LDO31 { + /* Unused */ + regulator-name = "vdd_ldo31"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo32_reg: LDO32 { + /* Unused */ + regulator-name = "vdd_ldo32"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo33_reg: LDO33 { + /* Unused */ + regulator-name = "vdd_ldo33"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo34_reg: LDO34 { + /* Unused */ + regulator-name = "vdd_ldo34"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo35_reg: LDO35 { + /* Unused */ + regulator-name = "vdd_ldo35"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2375000>; + }; + + ldo36_reg: LDO36 { + /* Unused */ + regulator-name = "vdd_ldo36"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo37_reg: LDO37 { + /* Unused */ + regulator-name = "vdd_ldo37"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + + ldo38_reg: LDO38 { + /* Unused */ + regulator-name = "vdd_ldo38"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + }; + buck1_reg: BUCK1 { regulator-name = "vdd_mif"; regulator-min-microvolt = <800000>; diff --git a/dts/src/arm/exynos5422-odroidxu3-common.dtsi b/dts/src/arm/exynos5422-odroidxu3-common.dtsi index 96e281c0a1..e522edb2bb 100644 --- a/dts/src/arm/exynos5422-odroidxu3-common.dtsi +++ b/dts/src/arm/exynos5422-odroidxu3-common.dtsi @@ -367,6 +367,12 @@ status = "okay"; }; +&ldo26_reg { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; +}; + &mixer { status = "okay"; }; diff --git a/dts/src/arm/exynos5422-odroidxu3.dts b/dts/src/arm/exynos5422-odroidxu3.dts index 0322f28191..db0bc17a66 100644 --- a/dts/src/arm/exynos5422-odroidxu3.dts +++ b/dts/src/arm/exynos5422-odroidxu3.dts @@ -49,6 +49,12 @@ }; }; +&ldo28_reg { + regulator-name = "dp_p3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; + &pwm { /* * PWM 0 -- fan diff --git a/dts/src/arm/exynos5800-peach-pi.dts b/dts/src/arm/exynos5800-peach-pi.dts index d80ab9085d..e0f470fe54 100644 --- a/dts/src/arm/exynos5800-peach-pi.dts +++ b/dts/src/arm/exynos5800-peach-pi.dts @@ -153,7 +153,7 @@ &clock_audss { assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>; - assigned-clock-parents = <&clock CLK_FOUT_EPLL>; + assigned-clock-parents = <&clock CLK_MAU_EPLL>; }; &cpu0 { @@ -312,6 +312,7 @@ regulator-name = "vdd_1v35"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -333,6 +334,7 @@ regulator-name = "vdd_2v"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -343,6 +345,7 @@ regulator-name = "vdd_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; diff --git a/dts/src/arm/gr-peach-audiocamerashield.dtsi b/dts/src/arm/gr-peach-audiocamerashield.dtsi index e31a9e3c18..8d77579807 100644 --- a/dts/src/arm/gr-peach-audiocamerashield.dtsi +++ b/dts/src/arm/gr-peach-audiocamerashield.dtsi @@ -69,10 +69,6 @@ port { ceu_in: endpoint { - hsync-active = <1>; - vsync-active = <1>; - bus-width = <8>; - pclk-sample = <1>; remote-endpoint = <&mt9v111_out>; }; }; diff --git a/dts/src/arm/hip04.dtsi b/dts/src/arm/hip04.dtsi index 44044f2751..0f917b272f 100644 --- a/dts/src/arm/hip04.dtsi +++ b/dts/src/arm/hip04.dtsi @@ -277,10 +277,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - port { - etb0_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator0_out_port0>; + in-ports { + port { + etb0_in_port: endpoint@0 { + remote-endpoint = <&replicator0_out_port0>; + }; }; }; }; @@ -291,10 +292,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - port { - etb1_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator1_out_port0>; + in-ports { + port { + etb1_in_port: endpoint@0 { + remote-endpoint = <&replicator1_out_port0>; + }; }; }; }; @@ -305,10 +307,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - port { - etb2_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator2_out_port0>; + in-ports { + port { + etb2_in_port: endpoint@0 { + remote-endpoint = <&replicator2_out_port0>; + }; }; }; }; @@ -319,10 +322,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - port { - etb3_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&replicator3_out_port0>; + in-ports { + port { + etb3_in_port: endpoint@0 { + remote-endpoint = <&replicator3_out_port0>; + }; }; }; }; @@ -333,10 +337,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - port { - tpiu_in_port: endpoint@0 { - slave-mode; - remote-endpoint = <&funnel4_out_port0>; + in-ports { + port { + tpiu_in_port: endpoint@0 { + remote-endpoint = <&funnel4_out_port0>; + }; }; }; }; @@ -347,7 +352,7 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -365,12 +370,11 @@ remote-endpoint = <&funnel4_in_port0>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator0_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel0_out_port0>; }; }; @@ -383,7 +387,7 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -401,12 +405,11 @@ remote-endpoint = <&funnel4_in_port1>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator1_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel1_out_port0>; }; }; @@ -419,11 +422,10 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; - /* replicator output ports */ port@0 { reg = <0>; replicator2_out_port0: endpoint { @@ -437,12 +439,11 @@ remote-endpoint = <&funnel4_in_port2>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator2_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel2_out_port0>; }; }; @@ -455,11 +456,10 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; - /* replicator output ports */ port@0 { reg = <0>; replicator3_out_port0: endpoint { @@ -473,12 +473,11 @@ remote-endpoint = <&funnel4_in_port3>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator3_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel3_out_port0>; }; }; @@ -491,48 +490,43 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel0_out_port0: endpoint { remote-endpoint = <&replicator0_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel0_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm0_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel0_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm1_out_port>; }; }; - port@3 { + port@2 { reg = <2>; funnel0_in_port2: endpoint { - slave-mode; remote-endpoint = <&ptm2_out_port>; }; }; - port@4 { + port@3 { reg = <3>; funnel0_in_port3: endpoint { - slave-mode; remote-endpoint = <&ptm3_out_port>; }; }; @@ -545,48 +539,43 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel1_out_port0: endpoint { remote-endpoint = <&replicator1_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel1_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm4_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel1_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm5_out_port>; }; }; - port@3 { + port@2 { reg = <2>; funnel1_in_port2: endpoint { - slave-mode; remote-endpoint = <&ptm6_out_port>; }; }; - port@4 { + port@3 { reg = <3>; funnel1_in_port3: endpoint { - slave-mode; remote-endpoint = <&ptm7_out_port>; }; }; @@ -599,48 +588,43 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel2_out_port0: endpoint { remote-endpoint = <&replicator2_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel2_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm8_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel2_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm9_out_port>; }; }; - port@3 { + port@2 { reg = <2>; funnel2_in_port2: endpoint { - slave-mode; remote-endpoint = <&ptm10_out_port>; }; }; - port@4 { + port@3 { reg = <3>; funnel2_in_port3: endpoint { - slave-mode; remote-endpoint = <&ptm11_out_port>; }; }; @@ -653,48 +637,43 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel3_out_port0: endpoint { remote-endpoint = <&replicator3_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel3_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm12_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel3_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm13_out_port>; }; }; - port@3 { + port@2 { reg = <2>; funnel3_in_port2: endpoint { - slave-mode; remote-endpoint = <&ptm14_out_port>; }; }; - port@4 { + port@3 { reg = <3>; funnel3_in_port3: endpoint { - slave-mode; remote-endpoint = <&ptm15_out_port>; }; }; @@ -707,50 +686,45 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output port */ - port@0 { - reg = <0>; + out-ports { + port { funnel4_out_port0: endpoint { remote-endpoint = <&tpiu_in_port>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel4_in_port0: endpoint { - slave-mode; remote-endpoint = <&replicator0_out_port1>; }; }; - port@2 { + port@1 { reg = <1>; funnel4_in_port1: endpoint { - slave-mode; remote-endpoint = <&replicator1_out_port1>; }; }; - port@3 { + port@2 { reg = <2>; funnel4_in_port2: endpoint { - slave-mode; remote-endpoint = <&replicator2_out_port1>; }; }; - port@4 { + port@3 { reg = <3>; funnel4_in_port3: endpoint { - slave-mode; remote-endpoint = <&replicator3_out_port1>; }; @@ -765,9 +739,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU0>; - port { - ptm0_out_port: endpoint { - remote-endpoint = <&funnel0_in_port0>; + out-ports { + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel0_in_port0>; + }; }; }; }; @@ -779,9 +755,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU1>; - port { - ptm1_out_port: endpoint { - remote-endpoint = <&funnel0_in_port1>; + out-ports { + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel0_in_port1>; + }; }; }; }; @@ -793,9 +771,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU2>; - port { - ptm2_out_port: endpoint { - remote-endpoint = <&funnel0_in_port2>; + out-ports { + port { + ptm2_out_port: endpoint { + remote-endpoint = <&funnel0_in_port2>; + }; }; }; }; @@ -807,9 +787,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU3>; - port { - ptm3_out_port: endpoint { - remote-endpoint = <&funnel0_in_port3>; + out-ports { + port { + ptm3_out_port: endpoint { + remote-endpoint = <&funnel0_in_port3>; + }; }; }; }; @@ -821,9 +803,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU4>; - port { - ptm4_out_port: endpoint { - remote-endpoint = <&funnel1_in_port0>; + out-ports { + port { + ptm4_out_port: endpoint { + remote-endpoint = <&funnel1_in_port0>; + }; }; }; }; @@ -835,9 +819,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU5>; - port { - ptm5_out_port: endpoint { - remote-endpoint = <&funnel1_in_port1>; + out-ports { + port { + ptm5_out_port: endpoint { + remote-endpoint = <&funnel1_in_port1>; + }; }; }; }; @@ -849,9 +835,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU6>; - port { - ptm6_out_port: endpoint { - remote-endpoint = <&funnel1_in_port2>; + out-ports { + port { + ptm6_out_port: endpoint { + remote-endpoint = <&funnel1_in_port2>; + }; }; }; }; @@ -863,9 +851,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU7>; - port { - ptm7_out_port: endpoint { - remote-endpoint = <&funnel1_in_port3>; + out-ports { + port { + ptm7_out_port: endpoint { + remote-endpoint = <&funnel1_in_port3>; + }; }; }; }; @@ -877,9 +867,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU8>; - port { - ptm8_out_port: endpoint { - remote-endpoint = <&funnel2_in_port0>; + out-ports { + port { + ptm8_out_port: endpoint { + remote-endpoint = <&funnel2_in_port0>; + }; }; }; }; @@ -890,9 +882,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU9>; - port { - ptm9_out_port: endpoint { - remote-endpoint = <&funnel2_in_port1>; + out-ports { + port { + ptm9_out_port: endpoint { + remote-endpoint = <&funnel2_in_port1>; + }; }; }; }; @@ -904,9 +898,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU10>; - port { - ptm10_out_port: endpoint { - remote-endpoint = <&funnel2_in_port2>; + out-ports { + port { + ptm10_out_port: endpoint { + remote-endpoint = <&funnel2_in_port2>; + }; }; }; }; @@ -918,9 +914,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU11>; - port { - ptm11_out_port: endpoint { - remote-endpoint = <&funnel2_in_port3>; + out-ports { + port { + ptm11_out_port: endpoint { + remote-endpoint = <&funnel2_in_port3>; + }; }; }; }; @@ -932,9 +930,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU12>; - port { - ptm12_out_port: endpoint { - remote-endpoint = <&funnel3_in_port0>; + out-ports { + port { + ptm12_out_port: endpoint { + remote-endpoint = <&funnel3_in_port0>; + }; }; }; }; @@ -946,9 +946,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU13>; - port { - ptm13_out_port: endpoint { - remote-endpoint = <&funnel3_in_port1>; + out-ports { + port { + ptm13_out_port: endpoint { + remote-endpoint = <&funnel3_in_port1>; + }; }; }; }; @@ -960,9 +962,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU14>; - port { - ptm14_out_port: endpoint { - remote-endpoint = <&funnel3_in_port2>; + out-ports { + port { + ptm14_out_port: endpoint { + remote-endpoint = <&funnel3_in_port2>; + }; }; }; }; @@ -974,9 +978,11 @@ clocks = <&clk_375m>; clock-names = "apb_pclk"; cpu = <&CPU15>; - port { - ptm15_out_port: endpoint { - remote-endpoint = <&funnel3_in_port3>; + out-ports { + port { + ptm15_out_port: endpoint { + remote-endpoint = <&funnel3_in_port3>; + }; }; }; }; diff --git a/dts/src/arm/imx1.dtsi b/dts/src/arm/imx1.dtsi index 3edc7b5550..b00ece16b8 100644 --- a/dts/src/arm/imx1.dtsi +++ b/dts/src/arm/imx1.dtsi @@ -164,7 +164,7 @@ reg = <0x00210000 0x10000>; ranges; - cspi1: cspi@213000 { + cspi1: spi@213000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx1-cspi"; @@ -186,7 +186,7 @@ status = "disabled"; }; - cspi2: cspi@219000 { + cspi2: spi@219000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx1-cspi"; diff --git a/dts/src/arm/imx23-evk.dts b/dts/src/arm/imx23-evk.dts index ad2ae25b7b..98efe1aeb2 100644 --- a/dts/src/arm/imx23-evk.dts +++ b/dts/src/arm/imx23-evk.dts @@ -58,7 +58,7 @@ status = "okay"; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; diff --git a/dts/src/arm/imx23-olinuxino.dts b/dts/src/arm/imx23-olinuxino.dts index e9351774c6..31b1e3581a 100644 --- a/dts/src/arm/imx23-olinuxino.dts +++ b/dts/src/arm/imx23-olinuxino.dts @@ -25,7 +25,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; @@ -59,7 +59,7 @@ }; }; - ssp1: ssp@80034000 { + ssp1: spi@80034000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx23-spi"; diff --git a/dts/src/arm/imx23-sansa.dts b/dts/src/arm/imx23-sansa.dts index 67de7863ad..faf701b2ad 100644 --- a/dts/src/arm/imx23-sansa.dts +++ b/dts/src/arm/imx23-sansa.dts @@ -55,7 +55,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; @@ -65,7 +65,7 @@ status = "okay"; }; - ssp1: ssp@80034000 { + ssp1: spi@80034000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc1_8bit_pins_a>; diff --git a/dts/src/arm/imx23-stmp378x_devb.dts b/dts/src/arm/imx23-stmp378x_devb.dts index 95c7b918f6..2ff6cdf71a 100644 --- a/dts/src/arm/imx23-stmp378x_devb.dts +++ b/dts/src/arm/imx23-stmp378x_devb.dts @@ -22,7 +22,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; diff --git a/dts/src/arm/imx23-xfi3.dts b/dts/src/arm/imx23-xfi3.dts index 9616e500b9..db53089fb7 100644 --- a/dts/src/arm/imx23-xfi3.dts +++ b/dts/src/arm/imx23-xfi3.dts @@ -54,7 +54,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; @@ -64,7 +64,7 @@ status = "okay"; }; - ssp1: ssp@80034000 { + ssp1: spi@80034000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc1_4bit_pins_a>; diff --git a/dts/src/arm/imx23.dtsi b/dts/src/arm/imx23.dtsi index 71bfd2b156..ea259927ee 100644 --- a/dts/src/arm/imx23.dtsi +++ b/dts/src/arm/imx23.dtsi @@ -93,7 +93,7 @@ status = "disabled"; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { reg = <0x80010000 0x2000>; interrupts = <15>; clocks = <&clks 33>; @@ -457,7 +457,7 @@ status = "disabled"; }; - ssp1: ssp@80034000 { + ssp1: spi@80034000 { reg = <0x80034000 0x2000>; interrupts = <2>; clocks = <&clks 33>; diff --git a/dts/src/arm/imx25.dtsi b/dts/src/arm/imx25.dtsi index 85c15ee632..b25309d26e 100644 --- a/dts/src/arm/imx25.dtsi +++ b/dts/src/arm/imx25.dtsi @@ -168,7 +168,7 @@ status = "disabled"; }; - spi1: cspi@43fa4000 { + spi1: spi@43fa4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; @@ -209,7 +209,7 @@ reg = <0x50000000 0x40000>; ranges; - spi3: cspi@50004000 { + spi3: spi@50004000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; @@ -238,7 +238,7 @@ status = "disabled"; }; - spi2: cspi@50010000 { + spi2: spi@50010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; diff --git a/dts/src/arm/imx27.dtsi b/dts/src/arm/imx27.dtsi index 753d88df16..151b0eb17d 100644 --- a/dts/src/arm/imx27.dtsi +++ b/dts/src/arm/imx27.dtsi @@ -209,7 +209,7 @@ status = "disabled"; }; - cspi1: cspi@1000e000 { + cspi1: spi@1000e000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx27-cspi"; @@ -221,7 +221,7 @@ status = "disabled"; }; - cspi2: cspi@1000f000 { + cspi2: spi@1000f000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx27-cspi"; @@ -373,7 +373,7 @@ status = "disabled"; }; - cspi3: cspi@10017000 { + cspi3: spi@10017000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx27-cspi"; diff --git a/dts/src/arm/imx28-apf28dev.dts b/dts/src/arm/imx28-apf28dev.dts index c4fadbc1b4..8df5ec4703 100644 --- a/dts/src/arm/imx28-apf28dev.dts +++ b/dts/src/arm/imx28-apf28dev.dts @@ -18,7 +18,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a @@ -27,7 +27,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_a>; diff --git a/dts/src/arm/imx28-apx4devkit.dts b/dts/src/arm/imx28-apx4devkit.dts index 96faa53ba4..6c9b498305 100644 --- a/dts/src/arm/imx28-apx4devkit.dts +++ b/dts/src/arm/imx28-apx4devkit.dts @@ -18,7 +18,7 @@ status = "okay"; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; @@ -26,7 +26,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; diff --git a/dts/src/arm/imx28-cfa10036.dts b/dts/src/arm/imx28-cfa10036.dts index e54f5aba70..8337ca21e2 100644 --- a/dts/src/arm/imx28-cfa10036.dts +++ b/dts/src/arm/imx28-cfa10036.dts @@ -66,7 +66,7 @@ }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a diff --git a/dts/src/arm/imx28-duckbill-2-485.dts b/dts/src/arm/imx28-duckbill-2-485.dts index 97084e463d..f4f2b3d16c 100644 --- a/dts/src/arm/imx28-duckbill-2-485.dts +++ b/dts/src/arm/imx28-duckbill-2-485.dts @@ -25,7 +25,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -36,7 +36,7 @@ non-removable; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_4bit_pins_b diff --git a/dts/src/arm/imx28-duckbill-2-enocean.dts b/dts/src/arm/imx28-duckbill-2-enocean.dts index 22215337f7..71d0fcbc2d 100644 --- a/dts/src/arm/imx28-duckbill-2-enocean.dts +++ b/dts/src/arm/imx28-duckbill-2-enocean.dts @@ -26,7 +26,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -37,7 +37,7 @@ non-removable; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_4bit_pins_b diff --git a/dts/src/arm/imx28-duckbill-2-spi.dts b/dts/src/arm/imx28-duckbill-2-spi.dts index 13e7b134da..6580ec6e26 100644 --- a/dts/src/arm/imx28-duckbill-2-spi.dts +++ b/dts/src/arm/imx28-duckbill-2-spi.dts @@ -29,7 +29,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -40,7 +40,7 @@ non-removable; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_a>; diff --git a/dts/src/arm/imx28-duckbill-2.dts b/dts/src/arm/imx28-duckbill-2.dts index 88556c93b0..693634edae 100644 --- a/dts/src/arm/imx28-duckbill-2.dts +++ b/dts/src/arm/imx28-duckbill-2.dts @@ -25,7 +25,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -36,7 +36,7 @@ non-removable; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_4bit_pins_b diff --git a/dts/src/arm/imx28-duckbill.dts b/dts/src/arm/imx28-duckbill.dts index f286bfe699..16f524428e 100644 --- a/dts/src/arm/imx28-duckbill.dts +++ b/dts/src/arm/imx28-duckbill.dts @@ -24,7 +24,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a @@ -34,7 +34,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-spi"; pinctrl-names = "default"; pinctrl-0 = <&spi2_pins_a>; diff --git a/dts/src/arm/imx28-evk.dts b/dts/src/arm/imx28-evk.dts index 93ab5bdfe0..5778300f44 100644 --- a/dts/src/arm/imx28-evk.dts +++ b/dts/src/arm/imx28-evk.dts @@ -103,7 +103,7 @@ status = "okay"; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -114,13 +114,13 @@ status = "okay"; }; - ssp1: ssp@80012000 { + ssp1: spi@80012000 { compatible = "fsl,imx28-mmc"; bus-width = <8>; wp-gpios = <&gpio0 28 0>; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-spi"; diff --git a/dts/src/arm/imx28-m28cu3.dts b/dts/src/arm/imx28-m28cu3.dts index 3bb5ffc644..8883d36a51 100644 --- a/dts/src/arm/imx28-m28cu3.dts +++ b/dts/src/arm/imx28-m28cu3.dts @@ -41,7 +41,7 @@ }; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a @@ -52,7 +52,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc2_4bit_pins_a diff --git a/dts/src/arm/imx28-m28evk.dts b/dts/src/arm/imx28-m28evk.dts index 7d97a0ce74..893886d17b 100644 --- a/dts/src/arm/imx28-m28evk.dts +++ b/dts/src/arm/imx28-m28evk.dts @@ -18,7 +18,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_8bit_pins_a @@ -30,7 +30,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-spi"; diff --git a/dts/src/arm/imx28-sps1.dts b/dts/src/arm/imx28-sps1.dts index 2393e83979..ea9212f6ec 100644 --- a/dts/src/arm/imx28-sps1.dts +++ b/dts/src/arm/imx28-sps1.dts @@ -40,7 +40,7 @@ }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a>; @@ -48,7 +48,7 @@ status = "okay"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx28-spi"; diff --git a/dts/src/arm/imx28-ts4600.dts b/dts/src/arm/imx28-ts4600.dts index f8a09a8c2c..dccdd6bcd0 100644 --- a/dts/src/arm/imx28-ts4600.dts +++ b/dts/src/arm/imx28-ts4600.dts @@ -25,7 +25,7 @@ apb@80000000 { apbh@80000000 { - ssp0: ssp@80010000 { + ssp0: spi@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a diff --git a/dts/src/arm/imx28.dtsi b/dts/src/arm/imx28.dtsi index 5107fdc482..2b7efb659f 100644 --- a/dts/src/arm/imx28.dtsi +++ b/dts/src/arm/imx28.dtsi @@ -117,7 +117,7 @@ status = "disabled"; }; - ssp0: ssp@80010000 { + ssp0: spi@80010000 { #address-cells = <1>; #size-cells = <0>; reg = <0x80010000 0x2000>; @@ -128,7 +128,7 @@ status = "disabled"; }; - ssp1: ssp@80012000 { + ssp1: spi@80012000 { #address-cells = <1>; #size-cells = <0>; reg = <0x80012000 0x2000>; @@ -139,7 +139,7 @@ status = "disabled"; }; - ssp2: ssp@80014000 { + ssp2: spi@80014000 { #address-cells = <1>; #size-cells = <0>; reg = <0x80014000 0x2000>; @@ -150,7 +150,7 @@ status = "disabled"; }; - ssp3: ssp@80016000 { + ssp3: spi@80016000 { #address-cells = <1>; #size-cells = <0>; reg = <0x80016000 0x2000>; diff --git a/dts/src/arm/imx31.dtsi b/dts/src/arm/imx31.dtsi index ca1419ca30..af7afccf5f 100644 --- a/dts/src/arm/imx31.dtsi +++ b/dts/src/arm/imx31.dtsi @@ -206,7 +206,7 @@ status = "disabled"; }; - spi2: cspi@50010000 { + spi2: spi@50010000 { compatible = "fsl,imx31-cspi"; reg = <0x50010000 0x4000>; interrupts = <13>; @@ -241,7 +241,7 @@ #clock-cells = <1>; }; - spi3: cspi@53f84000 { + spi3: spi@53f84000 { compatible = "fsl,imx31-cspi"; reg = <0x53f84000 0x4000>; interrupts = <17>; diff --git a/dts/src/arm/imx35.dtsi b/dts/src/arm/imx35.dtsi index 1c50b785ca..a1c3d28e87 100644 --- a/dts/src/arm/imx35.dtsi +++ b/dts/src/arm/imx35.dtsi @@ -133,7 +133,7 @@ status = "disabled"; }; - spi1: cspi@43fa4000 { + spi1: spi@43fa4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx35-cspi"; @@ -174,7 +174,7 @@ status = "disabled"; }; - spi2: cspi@50010000 { + spi2: spi@50010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx35-cspi"; diff --git a/dts/src/arm/imx50.dtsi b/dts/src/arm/imx50.dtsi index 7fae2ffb76..95b7fba583 100644 --- a/dts/src/arm/imx50.dtsi +++ b/dts/src/arm/imx50.dtsi @@ -140,7 +140,7 @@ status = "disabled"; }; - ecspi1: ecspi@50010000 { + ecspi1: spi@50010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi"; @@ -403,7 +403,7 @@ status = "disabled"; }; - ecspi2: ecspi@63fac000 { + ecspi2: spi@63fac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi"; @@ -426,7 +426,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin"; }; - cspi: cspi@63fc0000 { + cspi: spi@63fc0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx50-cspi", "fsl,imx35-cspi"; diff --git a/dts/src/arm/imx51-babbage.dts b/dts/src/arm/imx51-babbage.dts index ba60b0cb3c..35ee1b4247 100644 --- a/dts/src/arm/imx51-babbage.dts +++ b/dts/src/arm/imx51-babbage.dts @@ -204,6 +204,7 @@ reg = <0>; interrupt-parent = <&gpio1>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-adc; fsl,mc13xxx-uses-rtc; regulators { diff --git a/dts/src/arm/imx51-zii-rdu1.dts b/dts/src/arm/imx51-zii-rdu1.dts index 469cce2c03..e45a15ceb9 100644 --- a/dts/src/arm/imx51-zii-rdu1.dts +++ b/dts/src/arm/imx51-zii-rdu1.dts @@ -508,7 +508,7 @@ }; ds1341: rtc@68 { - compatible = "maxim,ds1341"; + compatible = "dallas,ds1341"; reg = <0x68>; }; diff --git a/dts/src/arm/imx51-zii-scu2-mezz.dts b/dts/src/arm/imx51-zii-scu2-mezz.dts index 26cf08549d..243d1c8cab 100644 --- a/dts/src/arm/imx51-zii-scu2-mezz.dts +++ b/dts/src/arm/imx51-zii-scu2-mezz.dts @@ -342,6 +342,14 @@ vcc-supply = <&vusb2_reg>; }; +&vpu { + status = "disabled"; +}; + +&wdog1 { + status = "disabled"; +}; + &iomuxc { pinctrl_ecspi1: ecspi1grp { fsl,pins = < diff --git a/dts/src/arm/imx51-zii-scu3-esb.dts b/dts/src/arm/imx51-zii-scu3-esb.dts index e6ebac8f43..14b2077781 100644 --- a/dts/src/arm/imx51-zii-scu3-esb.dts +++ b/dts/src/arm/imx51-zii-scu3-esb.dts @@ -350,6 +350,10 @@ vcc-supply = <&vusb2_reg>; }; +&vpu { + status = "disabled"; +}; + &wdog1 { status = "disabled"; }; diff --git a/dts/src/arm/imx51.dtsi b/dts/src/arm/imx51.dtsi index 5c4ba91e43..67d4627150 100644 --- a/dts/src/arm/imx51.dtsi +++ b/dts/src/arm/imx51.dtsi @@ -197,7 +197,7 @@ status = "disabled"; }; - ecspi1: ecspi@70010000 { + ecspi1: spi@70010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-ecspi"; @@ -464,7 +464,7 @@ status = "disabled"; }; - ecspi2: ecspi@83fac000 { + ecspi2: spi@83fac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-ecspi"; @@ -487,7 +487,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; }; - cspi: cspi@83fc0000 { + cspi: spi@83fc0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; @@ -608,7 +608,7 @@ status = "disabled"; }; - vpu@83ff4000 { + vpu: vpu@83ff4000 { compatible = "fsl,imx51-vpu", "cnm,codahx4"; reg = <0x83ff4000 0x1000>; interrupts = <9>; diff --git a/dts/src/arm/imx53-ppd.dts b/dts/src/arm/imx53-ppd.dts index cdb90bee7b..b560ff8845 100644 --- a/dts/src/arm/imx53-ppd.dts +++ b/dts/src/arm/imx53-ppd.dts @@ -319,7 +319,6 @@ &ecspi2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi2>; - num-chipselects = <1>; cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/dts/src/arm/imx53.dtsi b/dts/src/arm/imx53.dtsi index 6386185ae2..207eb557c9 100644 --- a/dts/src/arm/imx53.dtsi +++ b/dts/src/arm/imx53.dtsi @@ -259,7 +259,7 @@ status = "disabled"; }; - ecspi1: ecspi@50010000 { + ecspi1: spi@50010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; @@ -684,7 +684,7 @@ status = "disabled"; }; - ecspi2: ecspi@63fac000 { + ecspi2: spi@63fac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; @@ -707,7 +707,7 @@ fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; }; - cspi: cspi@63fc0000 { + cspi: spi@63fc0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; diff --git a/dts/src/arm/imx6dl-colibri-eval-v3.dts b/dts/src/arm/imx6dl-colibri-eval-v3.dts index 9de45a7173..d08e040279 100644 --- a/dts/src/arm/imx6dl-colibri-eval-v3.dts +++ b/dts/src/arm/imx6dl-colibri-eval-v3.dts @@ -146,7 +146,7 @@ &ecspi4 { status = "okay"; - mcp251x0: mcp251x@1 { + mcp251x0: mcp251x@0 { compatible = "microchip,mcp2515"; reg = <0>; clocks = <&clk16m>; diff --git a/dts/src/arm/imx6dl-icore-mipi.dts b/dts/src/arm/imx6dl-icore-mipi.dts index bf53f0552a..e43bccb78a 100644 --- a/dts/src/arm/imx6dl-icore-mipi.dts +++ b/dts/src/arm/imx6dl-icore-mipi.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2018 Engicam S.r.l. * Copyright (C) 2018 Amarula Solutions B.V. diff --git a/dts/src/arm/imx6dl-icore-rqs.dts b/dts/src/arm/imx6dl-icore-rqs.dts index 1281bc39b7..73d710d34b 100644 --- a/dts/src/arm/imx6dl-icore-rqs.dts +++ b/dts/src/arm/imx6dl-icore-rqs.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/dts/src/arm/imx6dl-icore.dts b/dts/src/arm/imx6dl-icore.dts index 971f9fc39c..80fa60607a 100644 --- a/dts/src/arm/imx6dl-icore.dts +++ b/dts/src/arm/imx6dl-icore.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/dts/src/arm/imx6dl-riotboard.dts b/dts/src/arm/imx6dl-riotboard.dts index dd3226fe5e..8e51491e68 100644 --- a/dts/src/arm/imx6dl-riotboard.dts +++ b/dts/src/arm/imx6dl-riotboard.dts @@ -84,6 +84,10 @@ status = "okay"; }; +&clks { + fsl,pmic-stby-poweroff; +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; @@ -164,6 +168,7 @@ reg = <0x08>; interrupt-parent = <&gpio5>; interrupts = <16 8>; + fsl,pmic-stby-poweroff; regulators { reg_vddcore: sw1ab { /* VDDARM_IN */ diff --git a/dts/src/arm/imx6q-apalis-eval.dts b/dts/src/arm/imx6q-apalis-eval.dts index 707ac9a461..0edd3043d9 100644 --- a/dts/src/arm/imx6q-apalis-eval.dts +++ b/dts/src/arm/imx6q-apalis-eval.dts @@ -196,6 +196,8 @@ }; &pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_moci>; /* active-high meaning opposite of regular PERST# active-low polarity */ reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; reset-gpio-active-high; diff --git a/dts/src/arm/imx6q-apalis-ixora-v1.1.dts b/dts/src/arm/imx6q-apalis-ixora-v1.1.dts index 4e1c8feaef..b94bb687be 100644 --- a/dts/src/arm/imx6q-apalis-ixora-v1.1.dts +++ b/dts/src/arm/imx6q-apalis-ixora-v1.1.dts @@ -196,6 +196,8 @@ }; &pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_moci>; /* active-high meaning opposite of regular PERST# active-low polarity */ reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; reset-gpio-active-high; diff --git a/dts/src/arm/imx6q-apalis-ixora.dts b/dts/src/arm/imx6q-apalis-ixora.dts index 469e3d0e28..302fd6adc8 100644 --- a/dts/src/arm/imx6q-apalis-ixora.dts +++ b/dts/src/arm/imx6q-apalis-ixora.dts @@ -200,6 +200,8 @@ }; &pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reset_moci>; /* active-high meaning opposite of regular PERST# active-low polarity */ reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; reset-gpio-active-high; diff --git a/dts/src/arm/imx6q-icore-mipi.dts b/dts/src/arm/imx6q-icore-mipi.dts index 95b2efda17..d51745268d 100644 --- a/dts/src/arm/imx6q-icore-mipi.dts +++ b/dts/src/arm/imx6q-icore-mipi.dts @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2017 Engicam S.r.l. * Copyright (C) 2017 Amarula Solutions B.V. @@ -8,10 +8,10 @@ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-icore.dtsi" +#include "imx6qdl-icore-1.5.dtsi" / { - model = "Engicam i.CoreM6 Quad/Dual MIPI Starter Kit"; + model = "Engicam i.CoreM6 1.5 Quad/Dual MIPI Starter Kit"; compatible = "engicam,imx6-icore", "fsl,imx6q"; }; diff --git a/dts/src/arm/imx6q-icore-ofcap10.dts b/dts/src/arm/imx6q-icore-ofcap10.dts index 49b60ca20e..81cc346dd1 100644 --- a/dts/src/arm/imx6q-icore-ofcap10.dts +++ b/dts/src/arm/imx6q-icore-ofcap10.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/dts/src/arm/imx6q-icore-ofcap12.dts b/dts/src/arm/imx6q-icore-ofcap12.dts index 6e27c8143f..241811c52b 100644 --- a/dts/src/arm/imx6q-icore-ofcap12.dts +++ b/dts/src/arm/imx6q-icore-ofcap12.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/dts/src/arm/imx6q-icore-rqs.dts b/dts/src/arm/imx6q-icore-rqs.dts index b81f48c6a8..cf6ba724f4 100644 --- a/dts/src/arm/imx6q-icore-rqs.dts +++ b/dts/src/arm/imx6q-icore-rqs.dts @@ -1,42 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2015 Amarula Solutions B.V. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright (C) 2015 Engicam S.r.l. */ /dts-v1/; diff --git a/dts/src/arm/imx6q-icore.dts b/dts/src/arm/imx6q-icore.dts index 5613dd9dc4..fe28c3cf54 100644 --- a/dts/src/arm/imx6q-icore.dts +++ b/dts/src/arm/imx6q-icore.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/dts/src/arm/imx6q.dtsi b/dts/src/arm/imx6q.dtsi index 0193ee6fe9..8381d24eff 100644 --- a/dts/src/arm/imx6q.dtsi +++ b/dts/src/arm/imx6q.dtsi @@ -163,7 +163,7 @@ aips-bus@2000000 { /* AIPS1 */ spba-bus@2000000 { - ecspi5: ecspi@2018000 { + ecspi5: spi@2018000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; diff --git a/dts/src/arm/imx6qdl-apalis.dtsi b/dts/src/arm/imx6qdl-apalis.dtsi index 05f07ea3e8..3dc99dd8dd 100644 --- a/dts/src/arm/imx6qdl-apalis.dtsi +++ b/dts/src/arm/imx6qdl-apalis.dtsi @@ -482,10 +482,6 @@ }; &iomuxc { - /* pins used on module */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_reset_moci>; - pinctrl_apalis_gpio1: gpio2io04grp { fsl,pins = < MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0 diff --git a/dts/src/arm/imx6qdl-icore-1.5.dtsi b/dts/src/arm/imx6qdl-icore-1.5.dtsi new file mode 100644 index 0000000000..d91d46b589 --- /dev/null +++ b/dts/src/arm/imx6qdl-icore-1.5.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Jacopo Mondi <jacopo@jmondi.org> + */ + +#include "imx6qdl-icore.dtsi" + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET_REF>; + phy-mode = "rmii"; + status = "okay"; +}; diff --git a/dts/src/arm/imx6qdl-icore-rqs.dtsi b/dts/src/arm/imx6qdl-icore-rqs.dtsi index acc3b11fba..ba93026ece 100644 --- a/dts/src/arm/imx6qdl-icore-rqs.dtsi +++ b/dts/src/arm/imx6qdl-icore-rqs.dtsi @@ -1,42 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2015 Amarula Solutions B.V. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright (C) 2015 Engicam S.r.l. */ #include <dt-bindings/gpio/gpio.h> @@ -316,7 +281,7 @@ }; &iomuxc { - pinctrl_audmux: audmux { + pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 diff --git a/dts/src/arm/imx6qdl-icore.dtsi b/dts/src/arm/imx6qdl-icore.dtsi index 9ce9937761..84d03c65f4 100644 --- a/dts/src/arm/imx6qdl-icore.dtsi +++ b/dts/src/arm/imx6qdl-icore.dtsi @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -310,7 +274,7 @@ }; &iomuxc { - pinctrl_audmux: audmux { + pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0 @@ -349,7 +313,7 @@ >; }; - pinctrl_gpmi_nand: gpmi-nand { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 diff --git a/dts/src/arm/imx6qdl-sabreauto.dtsi b/dts/src/arm/imx6qdl-sabreauto.dtsi index 9f11f1fcc3..a6dc5c42c6 100644 --- a/dts/src/arm/imx6qdl-sabreauto.dtsi +++ b/dts/src/arm/imx6qdl-sabreauto.dtsi @@ -4,6 +4,7 @@ // Copyright 2011 Linaro Ltd. #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { chosen { @@ -25,6 +26,47 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + home { + label = "Home"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + wakeup-source; + }; + + back { + label = "Back"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + wakeup-source; + }; + + program { + label = "Program"; + gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_PROGRAM>; + wakeup-source; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio5 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; + }; + }; + clocks { codec_osc: anaclk2 { compatible = "fixed-clock"; @@ -375,6 +417,15 @@ VLC-supply = <®_audio>; }; + touchscreen@4 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_egalax_int>; + interrupt-parent = <&gpio2>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + }; }; &i2c3 { @@ -410,6 +461,12 @@ >; }; + pinctrl_egalax_int: egalax-intgrp { + fsl,pins = < + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0xb0b1 + >; + }; + pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_KEY_COL1__ENET_MDIO 0x1b0b0 @@ -446,6 +503,16 @@ >; }; + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0 + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0 + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 + MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 + >; + }; + pinctrl_gpio_leds: gpioledsgrp { fsl,pins = < MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x80000000 diff --git a/dts/src/arm/imx6qdl-wandboard.dtsi b/dts/src/arm/imx6qdl-wandboard.dtsi index 381bf61fcd..b7d5fb4214 100644 --- a/dts/src/arm/imx6qdl-wandboard.dtsi +++ b/dts/src/arm/imx6qdl-wandboard.dtsi @@ -8,6 +8,10 @@ #include <dt-bindings/gpio/gpio.h> / { + chosen { + stdout-path = &uart1; + }; + sound { compatible = "fsl,imx6-wandboard-sgtl5000", "fsl,imx-audio-sgtl5000"; diff --git a/dts/src/arm/imx6qdl-zii-rdu2.dtsi b/dts/src/arm/imx6qdl-zii-rdu2.dtsi index 7fff3717cf..85e79a33bc 100644 --- a/dts/src/arm/imx6qdl-zii-rdu2.dtsi +++ b/dts/src/arm/imx6qdl-zii-rdu2.dtsi @@ -813,6 +813,10 @@ status = "okay"; }; +&snvs_rtc { + status = "disabled"; +}; + &ssi1 { status = "okay"; }; diff --git a/dts/src/arm/imx6qdl.dtsi b/dts/src/arm/imx6qdl.dtsi index 61d2d26afb..e4daf15088 100644 --- a/dts/src/arm/imx6qdl.dtsi +++ b/dts/src/arm/imx6qdl.dtsi @@ -317,7 +317,7 @@ status = "disabled"; }; - ecspi1: ecspi@2008000 { + ecspi1: spi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -331,7 +331,7 @@ status = "disabled"; }; - ecspi2: ecspi@200c000 { + ecspi2: spi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -345,7 +345,7 @@ status = "disabled"; }; - ecspi3: ecspi@2010000 { + ecspi3: spi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -359,7 +359,7 @@ status = "disabled"; }; - ecspi4: ecspi@2014000 { + ecspi4: spi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; diff --git a/dts/src/arm/imx6sl.dtsi b/dts/src/arm/imx6sl.dtsi index 7a4f5dace9..7a3ae7160c 100644 --- a/dts/src/arm/imx6sl.dtsi +++ b/dts/src/arm/imx6sl.dtsi @@ -168,7 +168,7 @@ status = "disabled"; }; - ecspi1: ecspi@2008000 { + ecspi1: spi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -180,7 +180,7 @@ status = "disabled"; }; - ecspi2: ecspi@200c000 { + ecspi2: spi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -192,7 +192,7 @@ status = "disabled"; }; - ecspi3: ecspi@2010000 { + ecspi3: spi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; @@ -204,7 +204,7 @@ status = "disabled"; }; - ecspi4: ecspi@2014000 { + ecspi4: spi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sl-ecspi", "fsl,imx51-ecspi"; diff --git a/dts/src/arm/imx6sll.dtsi b/dts/src/arm/imx6sll.dtsi index 000e6136a9..ed9a980bce 100644 --- a/dts/src/arm/imx6sll.dtsi +++ b/dts/src/arm/imx6sll.dtsi @@ -375,10 +375,12 @@ reg = <0x0209c000 0x4000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO1>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 94 7>, <&iomuxc 7 25 25>; }; gpio2: gpio@20a0000 { @@ -386,10 +388,12 @@ reg = <0x020a0000 0x4000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO2>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 50 32>; }; gpio3: gpio@20a4000 { @@ -397,10 +401,14 @@ reg = <0x020a4000 0x4000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO3>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 82 12>, <&iomuxc 12 103 4>, + <&iomuxc 16 101 2>, <&iomuxc 18 5 1>, + <&iomuxc 21 6 11>; }; gpio4: gpio@20a8000 { @@ -408,10 +416,20 @@ reg = <0x020a8000 0x4000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO4>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 17 8>, <&iomuxc 8 107 8>, + <&iomuxc 16 151 1>, <&iomuxc 17 149 1>, + <&iomuxc 18 146 1>, <&iomuxc 19 144 1>, + <&iomuxc 20 142 1>, <&iomuxc 21 143 1>, + <&iomuxc 22 150 1>, <&iomuxc 23 148 1>, + <&iomuxc 24 147 1>, <&iomuxc 25 145 1>, + <&iomuxc 26 152 1>, <&iomuxc 27 125 1>, + <&iomuxc 28 131 1>, <&iomuxc 29 134 1>, + <&iomuxc 30 129 1>, <&iomuxc 31 133 1>; }; gpio5: gpio@20ac000 { @@ -419,10 +437,22 @@ reg = <0x020ac000 0x4000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO5>; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 135 1>, <&iomuxc 1 128 1>, + <&iomuxc 2 132 1>, <&iomuxc 3 130 1>, + <&iomuxc 4 127 1>, <&iomuxc 5 126 1>, + <&iomuxc 6 120 1>, <&iomuxc 7 123 1>, + <&iomuxc 8 118 1>, <&iomuxc 9 122 1>, + <&iomuxc 10 124 1>, <&iomuxc 11 117 1>, + <&iomuxc 12 121 1>, <&iomuxc 13 119 1>, + <&iomuxc 14 116 1>, <&iomuxc 15 115 1>, + <&iomuxc 16 140 2>, <&iomuxc 18 136 1>, + <&iomuxc 19 138 1>, <&iomuxc 20 139 1>, + <&iomuxc 21 137 1>; }; gpio6: gpio@20b0000 { @@ -430,6 +460,7 @@ reg = <0x020b0000 0x4000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPIO6>; gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/dts/src/arm/imx6sx-sdb.dtsi b/dts/src/arm/imx6sx-sdb.dtsi index f8f31872fa..53b3408b5f 100644 --- a/dts/src/arm/imx6sx-sdb.dtsi +++ b/dts/src/arm/imx6sx-sdb.dtsi @@ -40,12 +40,14 @@ label = "Volume Up"; gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; + wakeup-source; }; volume-down { label = "Volume Down"; gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; }; }; diff --git a/dts/src/arm/imx6sx.dtsi b/dts/src/arm/imx6sx.dtsi index 844caa3936..95a3c1cb87 100644 --- a/dts/src/arm/imx6sx.dtsi +++ b/dts/src/arm/imx6sx.dtsi @@ -268,7 +268,7 @@ status = "disabled"; }; - ecspi1: ecspi@2008000 { + ecspi1: spi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -280,7 +280,7 @@ status = "disabled"; }; - ecspi2: ecspi@200c000 { + ecspi2: spi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -292,7 +292,7 @@ status = "disabled"; }; - ecspi3: ecspi@2010000 { + ecspi3: spi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -304,7 +304,7 @@ status = "disabled"; }; - ecspi4: ecspi@2014000 { + ecspi4: spi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; @@ -1079,7 +1079,7 @@ status = "disabled"; }; - qspi1: qspi@21e0000 { + qspi1: spi@21e0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-qspi"; @@ -1092,7 +1092,7 @@ status = "disabled"; }; - qspi2: qspi@21e4000 { + qspi2: spi@21e4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-qspi"; @@ -1273,7 +1273,7 @@ status = "disabled"; }; - ecspi5: ecspi@228c000 { + ecspi5: spi@228c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; diff --git a/dts/src/arm/imx6ul-ccimx6ulsbcpro.dts b/dts/src/arm/imx6ul-ccimx6ulsbcpro.dts new file mode 100644 index 0000000000..11966d12af --- /dev/null +++ b/dts/src/arm/imx6ul-ccimx6ulsbcpro.dts @@ -0,0 +1,390 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Digi International's ConnectCore6UL SBC Pro board device tree source + * + * Copyright 2018 Digi International, Inc. + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6ul.dtsi" +#include "imx6ul-ccimx6ulsom.dtsi" + +/ { + model = "Digi International ConnectCore 6UL SBC Pro."; + compatible = "digi,ccimx6ulsbcpro", "digi,ccimx6ulsom", "fsl,imx6ul"; + + lcd_backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm5 0 50000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1 { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <&ext_3v3>; + status = "okay"; +}; + +/* CAN2 is multiplexed with UART2 RTS/CTS */ +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <&ext_3v3>; + status = "disabled"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_master>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; + phy-reset-duration = <26>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + smsc,disable-energy-detect; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + smsc,disable-energy-detect; + reg = <1>; + }; + }; +}; + +&gpio5 { + emmc-usd-mux { + gpio-hog; + gpios = <1 GPIO_ACTIVE_LOW>; + output-high; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat0_17 + &pinctrl_lcdif_clken + &pinctrl_lcdif_hvsync>; + lcd-supply = <&ldo4_ext>; /* BU90T82 LVDS bridge power */ + status = "okay"; +}; + +&ldo4_ext { + regulator-max-microvolt = <1800000>; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&pwm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm5>; + status = "okay"; +}; + +&pwm6 { + status = "okay"; +}; + +&pwm7 { + status = "okay"; +}; + +&pwm8 { + status = "okay"; +}; + +&sai2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_sai2>; + pinctrl-1 = <&pinctrl_sai2_sleep>; + assigned-clocks = <&clks IMX6UL_CLK_SAI2_SEL>, + <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>, + <&clks IMX6UL_CLK_SAI2>; + assigned-clock-rates = <0>, <786432000>, <12288000>; + assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; + status = "okay"; +}; + +/* UART2 RTS/CTS muxed with CAN2 */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_4wires>; + uart-has-rtscts; + status = "okay"; +}; + +/* UART3 RTS/CTS muxed with CAN 1 */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_2wires>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-0 = <&pinctrl_usbotg1>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +/* USDHC2 (microSD conflicts with eMMC) */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + broken-cd; /* no carrier detect line (use polling) */ + status = "okay"; +}; + +&iomuxc { + pinctrl_adc1: adc1grp { + fsl,pins = < + /* EXP_GPIO_2 -> GPIO1_3/ADC1_IN3 */ + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + >; + }; + + pinctrl_ecspi1_master: ecspi1grp1 { + fsl,pins = < + MX6UL_PAD_LCD_DATA20__ECSPI1_SCLK 0x10b0 + MX6UL_PAD_LCD_DATA22__ECSPI1_MOSI 0x10b0 + MX6UL_PAD_LCD_DATA23__ECSPI1_MISO 0x10b0 + MX6UL_PAD_LCD_DATA21__GPIO3_IO26 0x10b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x40017051 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0 + MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0 + MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0 + MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0 + MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x40017051 + >; + }; + + pinctrl_enet2_mdio: mdioenet2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp{ + fsl,pins = < + MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020 + MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020 + >; + }; + pinctrl_flexcan2: flexcan2grp{ + fsl,pins = < + MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020 + MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020 + >; + }; + + pinctrl_lcdif_dat0_17: lcdifdatgrp0-17 { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79 + MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79 + MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79 + MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79 + MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79 + MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79 + MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79 + MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79 + MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79 + MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79 + MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79 + MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79 + MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79 + MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79 + MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79 + MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79 + MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79 + MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79 + >; + }; + + pinctrl_lcdif_clken: lcdifctrlgrp1 { + fsl,pins = < + MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x17050 + MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79 + >; + }; + + pinctrl_lcdif_hvsync: lcdifctrlgrp2 { + fsl,pins = < + MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79 + MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO05__PWM4_OUT 0x110b0 + >; + }; + + pinctrl_pwm5: pwm5grp { + fsl,pins = < + MX6UL_PAD_NAND_DQS__PWM5_OUT 0x110b0 + >; + }; + + pinctrl_sai2: sai2grp { + fsl,pins = < + MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x11088 + MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x11088 + MX6UL_PAD_JTAG_TMS__SAI2_MCLK 0x17088 + MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088 + MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088 + /* Interrupt */ + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x10b0 + >; + }; + + pinctrl_sai2_sleep: sai2grp-sleep { + fsl,pins = < + MX6UL_PAD_JTAG_TRST_B__GPIO1_IO15 0x3000 + MX6UL_PAD_JTAG_TCK__GPIO1_IO14 0x3000 + MX6UL_PAD_JTAG_TMS__GPIO1_IO11 0x3000 + MX6UL_PAD_JTAG_TDO__GPIO1_IO12 0x3000 + /* Interrupt */ + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x3000 + >; + }; + + pinctrl_uart2_4wires: uart2grp-4wires { + fsl,pins = < + MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1 + MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1 + MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x1b0b1 + MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x1b0b1 + >; + }; + + pinctrl_uart3_2wires: uart3grp-2wires { + fsl,pins = < + MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX 0x1b0b1 + MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10039 + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059 + /* Mux selector between eMMC/SD# */ + MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x79 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x17059 + MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x17059 + >; + }; +}; diff --git a/dts/src/arm/imx6ul-geam.dts b/dts/src/arm/imx6ul-geam.dts index d81d20f8fc..e22ec5be2b 100644 --- a/dts/src/arm/imx6ul-geam.dts +++ b/dts/src/arm/imx6ul-geam.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -328,7 +292,7 @@ >; }; - pinctrl_gpmi_nand: gpmi-nand { + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 diff --git a/dts/src/arm/imx6ul-isiot-emmc.dts b/dts/src/arm/imx6ul-isiot-emmc.dts index f5b422898e..1df3e376ae 100644 --- a/dts/src/arm/imx6ul-isiot-emmc.dts +++ b/dts/src/arm/imx6ul-isiot-emmc.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -50,28 +14,5 @@ }; &usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; - bus-width = <8>; - no-1-8-v; status = "okay"; }; - -&iomuxc { - pinctrl_usdhc2: usdhc2grp { - fsl,pins = < - MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070 - MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070 - MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070 - MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070 - MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070 - MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070 - MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070 - MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070 - MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070 - MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070 - MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070 - >; - }; -}; diff --git a/dts/src/arm/imx6ul-isiot-nand.dts b/dts/src/arm/imx6ul-isiot-nand.dts index de15e1c75d..8c26d4d1a7 100644 --- a/dts/src/arm/imx6ul-isiot-nand.dts +++ b/dts/src/arm/imx6ul-isiot-nand.dts @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -50,30 +14,5 @@ }; &gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - nand-on-flash-bbt; status = "okay"; }; - -&iomuxc { - pinctrl_gpmi_nand: gpmi-nand { - fsl,pins = < - MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 - MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 - MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 - MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 - MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 - MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 - MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 - MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 - MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 - MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 - MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 - MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 - MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 - MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 - MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 - >; - }; -}; diff --git a/dts/src/arm/imx6ul-isiot.dtsi b/dts/src/arm/imx6ul-isiot.dtsi index cd99285511..b1fa3f0a68 100644 --- a/dts/src/arm/imx6ul-isiot.dtsi +++ b/dts/src/arm/imx6ul-isiot.dtsi @@ -1,43 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Amarula Solutions B.V. * Copyright (C) 2016 Engicam S.r.l. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -133,6 +97,13 @@ }; }; +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "disabled"; +}; + &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -243,6 +214,15 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; + bus-width = <8>; + no-1-8-v; + status = "disabled"; +}; + &iomuxc { pinctrl_enet1: enet1grp { fsl,pins = < @@ -259,6 +239,26 @@ >; }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000 + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 @@ -366,4 +366,20 @@ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9 >; }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17070 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17070 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17070 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17070 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17070 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17070 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17070 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17070 + MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17070 + >; + }; }; diff --git a/dts/src/arm/imx6ul.dtsi b/dts/src/arm/imx6ul.dtsi index 6dc0b569ac..083d3446c4 100644 --- a/dts/src/arm/imx6ul.dtsi +++ b/dts/src/arm/imx6ul.dtsi @@ -89,6 +89,8 @@ "pll1_sys"; arm-supply = <®_arm>; soc-supply = <®_soc>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; }; @@ -156,7 +158,6 @@ compatible = "arm,cortex-a7-pmu"; interrupt-parent = <&gpc>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; }; soc { @@ -218,7 +219,7 @@ reg = <0x02000000 0x40000>; ranges; - ecspi1: ecspi@2008000 { + ecspi1: spi@2008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -230,7 +231,7 @@ status = "disabled"; }; - ecspi2: ecspi@200c000 { + ecspi2: spi@200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -242,7 +243,7 @@ status = "disabled"; }; - ecspi3: ecspi@2010000 { + ecspi3: spi@2010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -254,7 +255,7 @@ status = "disabled"; }; - ecspi4: ecspi@2014000 { + ecspi4: spi@2014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; @@ -918,6 +919,17 @@ reg = <0x021b0000 0x4000>; }; + weim: weim@21b8000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,imx6ul-weim", "fsl,imx6q-weim"; + reg = <0x021b8000 0x4000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_EIM>; + fsl,weim-cs-gpr = <&gpr>; + status = "disabled"; + }; + ocotp: ocotp-ctrl@21bc000 { #address-cells = <1>; #size-cells = <1>; @@ -932,6 +944,10 @@ tempmon_temp_grade: temp-grade@20 { reg = <0x20 4>; }; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; lcdif: lcdif@21c8000 { @@ -945,7 +961,7 @@ status = "disabled"; }; - qspi: qspi@21e0000 { + qspi: spi@21e0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi"; diff --git a/dts/src/arm/imx6ull-14x14-evk.dts b/dts/src/arm/imx6ull-14x14-evk.dts index 30ef60344a..0ba64546c1 100644 --- a/dts/src/arm/imx6ull-14x14-evk.dts +++ b/dts/src/arm/imx6ull-14x14-evk.dts @@ -45,7 +45,7 @@ #include "imx6ul-14x14-evk.dtsi" / { - model = "Freescale i.MX6 UlltraLite 14x14 EVK Board"; + model = "Freescale i.MX6 UltraLiteLite 14x14 EVK Board"; compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull"; }; diff --git a/dts/src/arm/imx6ull-pinfunc.h b/dts/src/arm/imx6ull-pinfunc.h index fdc46bb09c..a282a31a4b 100644 --- a/dts/src/arm/imx6ull-pinfunc.h +++ b/dts/src/arm/imx6ull-pinfunc.h @@ -14,14 +14,38 @@ * The pin function ID is a tuple of * <mux_reg conf_reg input_reg mux_mode input_val> */ +/* signals common for i.MX6UL and i.MX6ULL */ +#undef MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX +#define MX6UL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6 +#undef MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX +#define MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7 +#undef MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS +#define MX6UL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5 +#undef MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS +#define MX6UL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6 +#undef MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS +#define MX6UL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7 + +/* signals for i.MX6ULL only */ +#define MX6ULL_PAD_UART1_TX_DATA__UART5_DCE_TX 0x0084 0x0310 0x0000 0x9 0x0 #define MX6ULL_PAD_UART1_TX_DATA__UART5_DTE_RX 0x0084 0x0310 0x0644 0x9 0x4 #define MX6ULL_PAD_UART1_RX_DATA__UART5_DCE_RX 0x0088 0x0314 0x0644 0x9 0x5 -#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_RTS 0x008C 0x0318 0x0640 0x9 0x3 -#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_RTS 0x0090 0x031C 0x0640 0x9 0x4 -#define MX6ULL_PAD_UART5_TX_DATA__UART5_DTE_RX 0x00BC 0x0348 0x0644 0x0 0x6 -#define MX6ULL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x00C0 0x034C 0x0644 0x0 0x7 -#define MX6ULL_PAD_ENET1_RX_EN__UART5_DCE_RTS 0x00CC 0x0358 0x0640 0x1 0x5 -#define MX6ULL_PAD_ENET1_TX_DATA0__UART5_DTE_RTS 0x00D0 0x035C 0x0640 0x1 0x6 +#define MX6ULL_PAD_UART1_RX_DATA__UART5_DTE_TX 0x0088 0x0314 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART1_CTS_B__UART5_DCE_CTS 0x008C 0x0318 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART1_CTS_B__UART5_DTE_RTS 0x008C 0x0318 0x0640 0x9 0x3 +#define MX6ULL_PAD_UART1_RTS_B__UART5_DCE_RTS 0x0090 0x031C 0x0640 0x9 0x4 +#define MX6ULL_PAD_UART1_RTS_B__UART5_DTE_CTS 0x0090 0x031C 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART4_RX_DATA__EPDC_PWRCTRL01 0x00B8 0x0344 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART5_TX_DATA__EPDC_PWRCTRL02 0x00BC 0x0348 0x0000 0x9 0x0 +#define MX6ULL_PAD_UART5_RX_DATA__EPDC_PWRCTRL03 0x00C0 0x034C 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_RX_DATA0__EPDC_SDCE04 0x00C4 0x0350 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_RX_DATA1__EPDC_SDCE05 0x00C8 0x0354 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_RX_EN__EPDC_SDCE06 0x00CC 0x0358 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_TX_DATA0__EPDC_SDCE07 0x00D0 0x035C 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_TX_DATA1__EPDC_SDCE08 0x00D4 0x0360 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_TX_EN__EPDC_SDCE09 0x00D8 0x0364 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_TX_CLK__EPDC_SDOED 0x00DC 0x0368 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET1_RX_ER__EPDC_SDOEZ 0x00E0 0x036C 0x0000 0x9 0x0 #define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0 #define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0 #define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0 @@ -48,6 +72,8 @@ #define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK 0x0158 0x03E4 0x0000 0x9 0x0 #define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP 0x015C 0x03E8 0x0000 0x9 0x0 #define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1 0x016C 0x03F8 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA22__EPDC_SDCE02 0x0170 0x03FC 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA23__EPDC_SDCE03 0x0174 0x0400 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4 0x0460 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8 0x0464 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC 0x0468 0x0000 0x9 0x0 @@ -55,7 +81,6 @@ #define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0 -#define MX6ULL_PAD_CSI_DATA02__UART5_DCE_RTS 0x01EC 0x0478 0x0640 0x8 0x7 #define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0 #define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0 diff --git a/dts/src/arm/imx6ull.dtsi b/dts/src/arm/imx6ull.dtsi index cd1776a701..796ed35d4a 100644 --- a/dts/src/arm/imx6ull.dtsi +++ b/dts/src/arm/imx6ull.dtsi @@ -22,7 +22,7 @@ >; fsl,soc-operating-points = < /* KHz uV */ - 900000 1175000 + 900000 1250000 792000 1175000 528000 1175000 396000 1175000 diff --git a/dts/src/arm/imx6ulz-14x14-evk.dts b/dts/src/arm/imx6ulz-14x14-evk.dts new file mode 100644 index 0000000000..6f1af240e0 --- /dev/null +++ b/dts/src/arm/imx6ulz-14x14-evk.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2018 NXP. + +/dts-v1/; + +#include "imx6ulz.dtsi" +#include "imx6ul-14x14-evk.dtsi" + +/delete-node/ &fec1; +/delete-node/ &fec2; +/delete-node/ &lcdif; +/delete-node/ &tsc; + +/ { + model = "Freescale i.MX6 ULZ 14x14 EVK Board"; + compatible = "fsl,imx6ulz-14x14-evk", "fsl,imx6ull", "fsl,imx6ulz"; + + /delete-node/ panel; +}; diff --git a/dts/src/arm/imx6ulz.dtsi b/dts/src/arm/imx6ulz.dtsi new file mode 100644 index 0000000000..ae6d7e5937 --- /dev/null +++ b/dts/src/arm/imx6ulz.dtsi @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2018 NXP. + +#include "imx6ull.dtsi" + +/ { + aliases { + /delete-property/ ethernet0; + /delete-property/ ethernet1; + /delete-property/ i2c2; + /delete-property/ i2c3; + /delete-property/ serial4; + /delete-property/ serial5; + /delete-property/ serial6; + /delete-property/ serial7; + /delete-property/ spi2; + /delete-property/ spi3; + }; +}; + +/delete-node/ &adc1; +/delete-node/ &can1; +/delete-node/ &can2; +/delete-node/ &ecspi3; +/delete-node/ &ecspi4; +/delete-node/ &epit2; +/delete-node/ &gpt2; +/delete-node/ &i2c3; +/delete-node/ &i2c4; +/delete-node/ &pwm5; +/delete-node/ &pwm6; +/delete-node/ &pwm7; +/delete-node/ &pwm8; +/delete-node/ &uart5; +/delete-node/ &uart6; +/delete-node/ &uart7; +/delete-node/ &uart8; diff --git a/dts/src/arm/imx7d-sdb.dts b/dts/src/arm/imx7d-sdb.dts index c9b3c60b0e..f1bafdaa7e 100644 --- a/dts/src/arm/imx7d-sdb.dts +++ b/dts/src/arm/imx7d-sdb.dts @@ -27,12 +27,14 @@ label = "Volume Up"; gpios = <&gpio5 11 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; + wakeup-source; }; volume-down { label = "Volume Down"; gpios = <&gpio5 10 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; + wakeup-source; }; }; diff --git a/dts/src/arm/imx7d.dtsi b/dts/src/arm/imx7d.dtsi index 7234e8330a..826224bf7f 100644 --- a/dts/src/arm/imx7d.dtsi +++ b/dts/src/arm/imx7d.dtsi @@ -20,6 +20,7 @@ reg = <1>; clock-frequency = <996000000>; operating-points-v2 = <&cpu0_opp_table>; + cpu-idle-states = <&cpu_sleep_wait>; }; }; @@ -63,9 +64,11 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - port { - etm1_out_port: endpoint { - remote-endpoint = <&ca_funnel_in_port1>; + out-ports { + port { + etm1_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port1>; + }; }; }; }; @@ -146,17 +149,20 @@ fsl,max-link-speed = <2>; power-domains = <&pgc_pcie_phy>; resets = <&src IMX7_RESET_PCIEPHY>, - <&src IMX7_RESET_PCIE_CTRL_APPS_EN>; - reset-names = "pciephy", "apps"; + <&src IMX7_RESET_PCIE_CTRL_APPS_EN>, + <&src IMX7_RESET_PCIE_CTRL_APPS_TURNOFF>; + reset-names = "pciephy", "apps", "turnoff"; status = "disabled"; }; }; -&ca_funnel_ports { +&ca_funnel_in_ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { reg = <1>; ca_funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&etm1_out_port>; }; }; diff --git a/dts/src/arm/imx7s-warp.dts b/dts/src/arm/imx7s-warp.dts index fa390da636..f7ba2c0a24 100644 --- a/dts/src/arm/imx7s-warp.dts +++ b/dts/src/arm/imx7s-warp.dts @@ -1,44 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (C) 2016 NXP Semiconductors. * Author: Fabio Estevam <fabio.estevam@nxp.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -216,6 +179,13 @@ status = "okay"; }; +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + &i2c4 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -346,6 +316,13 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; + pinctrl_i2c4: i2c4grp { fsl,pins = < MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f diff --git a/dts/src/arm/imx7s.dtsi b/dts/src/arm/imx7s.dtsi index a052198f6e..aa8df7d93b 100644 --- a/dts/src/arm/imx7s.dtsi +++ b/dts/src/arm/imx7s.dtsi @@ -54,6 +54,19 @@ #address-cells = <1>; #size-cells = <0>; + idle-states { + entry-method = "psci"; + + cpu_sleep_wait: cpu-sleep-wait { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <100>; + exit-latency-us = <50>; + min-residency-us = <1000>; + }; + }; + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; @@ -61,6 +74,7 @@ clock-frequency = <792000000>; clock-latency = <61036>; /* two CLK32 periods */ clocks = <&clks IMX7D_CLK_ARM>; + cpu-idle-states = <&cpu_sleep_wait>; }; }; @@ -106,7 +120,7 @@ */ compatible = "arm,coresight-replicator"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; /* replicator output ports */ @@ -123,12 +137,11 @@ remote-endpoint = <&etr_in_port>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator_in_port0: endpoint { - slave-mode; remote-endpoint = <&etf_out_port>; }; }; @@ -168,28 +181,23 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - ca_funnel_ports: ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel input ports */ - port@0 { - reg = <0>; + ca_funnel_in_ports: in-ports { + port { ca_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&etm0_out_port>; }; }; - /* funnel output port */ - port@2 { - reg = <0>; + /* the other input ports are not connect to anything */ + }; + + out-ports { + port { ca_funnel_out_port0: endpoint { remote-endpoint = <&hugo_funnel_in_port0>; }; }; - /* the other input ports are not connect to anything */ }; }; @@ -200,9 +208,11 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - port { - etm0_out_port: endpoint { - remote-endpoint = <&ca_funnel_in_port0>; + out-ports { + port { + etm0_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port0>; + }; }; }; }; @@ -213,15 +223,13 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; - /* funnel input ports */ port@0 { reg = <0>; hugo_funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&ca_funnel_out_port0>; }; }; @@ -229,18 +237,18 @@ port@1 { reg = <1>; hugo_funnel_in_port1: endpoint { - slave-mode; /* M4 input */ + /* M4 input */ }; }; + /* the other input ports are not connect to anything */ + }; - port@2 { - reg = <0>; + out-ports { + port { hugo_funnel_out_port0: endpoint { remote-endpoint = <&etf_in_port>; }; }; - - /* the other input ports are not connect to anything */ }; }; @@ -250,20 +258,16 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + in-ports { + port { etf_in_port: endpoint { - slave-mode; remote-endpoint = <&hugo_funnel_out_port0>; }; }; + }; - port@1 { - reg = <0>; + out-ports { + port { etf_out_port: endpoint { remote-endpoint = <&replicator_in_port0>; }; @@ -277,10 +281,11 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - port { - etr_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port1>; + in-ports { + port { + etr_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; }; }; }; @@ -291,10 +296,11 @@ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; - port { - tpiu_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port0>; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; }; }; }; @@ -563,14 +569,6 @@ clock-names = "snvs-rtc"; }; - snvs_poweroff: snvs-poweroff { - compatible = "syscon-poweroff"; - regmap = <&snvs>; - offset = <0x38>; - value = <0x60>; - mask = <0x60>; - }; - snvs_pwrkey: snvs-powerkey { compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; @@ -644,7 +642,7 @@ status = "disabled"; }; - ecspi4: ecspi@30630000 { + ecspi4: spi@30630000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; @@ -725,7 +723,7 @@ reg = <0x30800000 0x100000>; ranges; - ecspi1: ecspi@30820000 { + ecspi1: spi@30820000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; @@ -737,7 +735,7 @@ status = "disabled"; }; - ecspi2: ecspi@30830000 { + ecspi2: spi@30830000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; @@ -749,7 +747,7 @@ status = "disabled"; }; - ecspi3: ecspi@30840000 { + ecspi3: spi@30840000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; @@ -974,6 +972,25 @@ status = "disabled"; }; + mu0a: mailbox@30aa0000 { + compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu"; + reg = <0x30aa0000 0x10000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_MU_ROOT_CLK>; + #mbox-cells = <2>; + status = "disabled"; + }; + + mu0b: mailbox@30ab0000 { + compatible = "fsl,imx7s-mu", "fsl,imx6sx-mu"; + reg = <0x30ab0000 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_MU_ROOT_CLK>; + #mbox-cells = <2>; + fsl,mu-side-b; + status = "disabled"; + }; + usbotg1: usb@30b10000 { compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; reg = <0x30b10000 0x200>; diff --git a/dts/src/arm/imx7ulp-pinfunc.h b/dts/src/arm/imx7ulp-pinfunc.h index fe511775b5..85f6b01780 100644 --- a/dts/src/arm/imx7ulp-pinfunc.h +++ b/dts/src/arm/imx7ulp-pinfunc.h @@ -116,6 +116,7 @@ #define IMX7ULP_PAD_PTC13__LPI2C7_SDA 0x0034 0x030c 0x5 0x1 #define IMX7ULP_PAD_PTC13__TPM7_CLKIN 0x0034 0x02f4 0x6 0x1 #define IMX7ULP_PAD_PTC13__FB_AD13 0x0034 0x0000 0x9 0x0 +#define IMX7ULP_PAD_PTC13__USB0_ID 0x0034 0x0338 0xb 0x1 #define IMX7ULP_PAD_PTC14__PTC14 0x0038 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTC14__TRACE_D1 0x0038 0x0000 0xa 0x0 #define IMX7ULP_PAD_PTC14__FXIO1_D10 0x0038 0x022c 0x2 0x1 @@ -136,6 +137,7 @@ #define IMX7ULP_PAD_PTC16__LPSPI3_SIN 0x0040 0x0324 0x3 0x1 #define IMX7ULP_PAD_PTC16__TPM7_CH2 0x0040 0x02e4 0x6 0x1 #define IMX7ULP_PAD_PTC16__FB_ALE_FB_CS1_B_FB_TS_B 0x0040 0x0000 0x9 0x0 +#define IMX7ULP_PAD_PTC16__USB1_OC2 0x0040 0x0334 0xb 0x1 #define IMX7ULP_PAD_PTC17__PTC17 0x0044 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTC17__FXIO1_D13 0x0044 0x0238 0x2 0x1 #define IMX7ULP_PAD_PTC17__LPSPI3_SOUT 0x0044 0x0328 0x3 0x1 @@ -146,11 +148,16 @@ #define IMX7ULP_PAD_PTC18__LPSPI3_SCK 0x0048 0x0320 0x3 0x1 #define IMX7ULP_PAD_PTC18__TPM6_CH0 0x0048 0x02d0 0x6 0x1 #define IMX7ULP_PAD_PTC18__FB_OE_B 0x0048 0x0000 0x9 0x0 +#define IMX7ULP_PAD_PTC18__USB0_ID 0x0048 0x0338 0xb 0x2 +#define IMX7ULP_PAD_PTC18__VIU_DE 0x0048 0x033c 0xc 0x1 #define IMX7ULP_PAD_PTC19__PTC19 0x004c 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTC19__FXIO1_D15 0x004c 0x0240 0x2 0x1 #define IMX7ULP_PAD_PTC19__LPSPI3_PCS0 0x004c 0x0310 0x3 0x1 #define IMX7ULP_PAD_PTC19__TPM6_CH1 0x004c 0x02d4 0x6 0x1 #define IMX7ULP_PAD_PTC19__FB_A16 0x004c 0x0000 0x9 0x0 +#define IMX7ULP_PAD_PTC19__USB0_ID 0x004c 0x0338 0xa 0x3 +#define IMX7ULP_PAD_PTC19__USB1_PWR2 0x004c 0x0000 0xb 0x0 +#define IMX7ULP_PAD_PTC19__VIU_DE 0x004c 0x033c 0xc 0x3 #define IMX7ULP_PAD_PTD0__PTD0 0x0080 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTD0__SDHC0_RESET_B 0x0080 0x0000 0x8 0x0 #define IMX7ULP_PAD_PTD1__PTD1 0x0084 0x0000 0x1 0x0 @@ -218,6 +225,7 @@ #define IMX7ULP_PAD_PTE5__LPI2C5_SDA 0x0114 0x02c0 0x5 0x2 #define IMX7ULP_PAD_PTE5__TPM5_CH0 0x0114 0x02c4 0x6 0x2 #define IMX7ULP_PAD_PTE5__SDHC1_D2 0x0114 0x0000 0x8 0x0 +#define IMX7ULP_PAD_PTE5__VIU_DE 0x0114 0x033c 0xc 0x2 #define IMX7ULP_PAD_PTE6__PTE6 0x0118 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE6__FXIO1_D25 0x0118 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE6__LPSPI2_SCK 0x0118 0x02ac 0x3 0x2 @@ -226,8 +234,10 @@ #define IMX7ULP_PAD_PTE6__TPM7_CH3 0x0118 0x02e8 0x6 0x2 #define IMX7ULP_PAD_PTE6__SDHC1_D4 0x0118 0x0000 0x8 0x0 #define IMX7ULP_PAD_PTE6__FB_A17 0x0118 0x0000 0x9 0x0 +#define IMX7ULP_PAD_PTE6__USB0_OC 0x0118 0x0330 0xb 0x1 #define IMX7ULP_PAD_PTE7__PTE7 0x011c 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE7__TRACE_D7 0x011c 0x0000 0xa 0x0 +#define IMX7ULP_PAD_PTE7__USB0_PWR 0x011c 0x0000 0xb 0x0 #define IMX7ULP_PAD_PTE7__VIU_FID 0x011c 0x0000 0xc 0x0 #define IMX7ULP_PAD_PTE7__FXIO1_D24 0x011c 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE7__LPSPI2_PCS0 0x011c 0x029c 0x3 0x2 @@ -278,6 +288,7 @@ #define IMX7ULP_PAD_PTE11__FB_A20 0x012c 0x0000 0x9 0x0 #define IMX7ULP_PAD_PTE12__PTE12 0x0130 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE12__TRACE_D2 0x0130 0x0000 0xa 0x0 +#define IMX7ULP_PAD_PTE12__USB1_OC2 0x0130 0x0334 0xb 0x2 #define IMX7ULP_PAD_PTE12__VIU_D20 0x0130 0x0000 0xc 0x0 #define IMX7ULP_PAD_PTE12__FXIO1_D19 0x0130 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE12__LPSPI3_SIN 0x0130 0x0324 0x3 0x2 @@ -288,6 +299,7 @@ #define IMX7ULP_PAD_PTE12__FB_A21 0x0130 0x0000 0x9 0x0 #define IMX7ULP_PAD_PTE13__PTE13 0x0134 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE13__TRACE_D1 0x0134 0x0000 0xa 0x0 +#define IMX7ULP_PAD_PTE13__USB1_PWR2 0x0134 0x0000 0xb 0x0 #define IMX7ULP_PAD_PTE13__VIU_D21 0x0134 0x0000 0xc 0x0 #define IMX7ULP_PAD_PTE13__FXIO1_D18 0x0134 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE13__LPSPI3_SOUT 0x0134 0x0328 0x3 0x2 @@ -298,6 +310,7 @@ #define IMX7ULP_PAD_PTE13__FB_A22 0x0134 0x0000 0x9 0x0 #define IMX7ULP_PAD_PTE14__PTE14 0x0138 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE14__TRACE_D0 0x0138 0x0000 0xa 0x0 +#define IMX7ULP_PAD_PTE14__USB0_OC 0x0138 0x0330 0xb 0x2 #define IMX7ULP_PAD_PTE14__VIU_D22 0x0138 0x0000 0xc 0x0 #define IMX7ULP_PAD_PTE14__FXIO1_D17 0x0138 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE14__LPSPI3_SCK 0x0138 0x0320 0x3 0x2 @@ -308,6 +321,7 @@ #define IMX7ULP_PAD_PTE14__FB_A23 0x0138 0x0000 0x9 0x0 #define IMX7ULP_PAD_PTE15__PTE15 0x013c 0x0000 0x1 0x0 #define IMX7ULP_PAD_PTE15__TRACE_CLKOUT 0x013c 0x0000 0xa 0x0 +#define IMX7ULP_PAD_PTE15__USB0_PWR 0x013c 0x0000 0xb 0x0 #define IMX7ULP_PAD_PTE15__VIU_D23 0x013c 0x0000 0xc 0x0 #define IMX7ULP_PAD_PTE15__FXIO1_D16 0x013c 0x0000 0x2 0x0 #define IMX7ULP_PAD_PTE15__LPSPI3_PCS0 0x013c 0x0310 0x3 0x2 @@ -315,7 +329,7 @@ #define IMX7ULP_PAD_PTE15__TPM6_CH1 0x013c 0x02d4 0x6 0x2 #define IMX7ULP_PAD_PTE15__FB_A24 0x013c 0x0000 0x9 0x0 #define IMX7ULP_PAD_PTF0__PTF0 0x0180 0x0000 0x1 0x0 -#define IMX7ULP_PAD_PTF0__VIU_DE 0x0180 0x0000 0xc 0x0 +#define IMX7ULP_PAD_PTF0__VIU_DE 0x0180 0x033c 0xc 0x0 #define IMX7ULP_PAD_PTF0__LPUART4_CTS_B 0x0180 0x0244 0x4 0x3 #define IMX7ULP_PAD_PTF0__LPI2C4_SCL 0x0180 0x0278 0x5 0x3 #define IMX7ULP_PAD_PTF0__TPM4_CLKIN 0x0180 0x0298 0x6 0x3 diff --git a/dts/src/arm/iwg20d-q7-common.dtsi b/dts/src/arm/iwg20d-q7-common.dtsi index 5cae74eb6c..ca9154dd80 100644 --- a/dts/src/arm/iwg20d-q7-common.dtsi +++ b/dts/src/arm/iwg20d-q7-common.dtsi @@ -160,10 +160,6 @@ clock-frequency = <100000000>; }; -&pciec { - status = "okay"; -}; - &pfc { can0_pins: can0 { groups = "can0_data_d"; diff --git a/dts/src/arm/keystone-k2g.dtsi b/dts/src/arm/keystone-k2g.dtsi index 738b44cf2b..1c833105d6 100644 --- a/dts/src/arm/keystone-k2g.dtsi +++ b/dts/src/arm/keystone-k2g.dtsi @@ -416,7 +416,7 @@ clock-names = "fck", "mmchsdb_fck"; }; - qspi: qspi@2940000 { + qspi: spi@2940000 { compatible = "ti,k2g-qspi", "cdns,qspi-nor"; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/lpc32xx.dtsi b/dts/src/arm/lpc32xx.dtsi index abff7ef7c9..b7303a4e42 100644 --- a/dts/src/arm/lpc32xx.dtsi +++ b/dts/src/arm/lpc32xx.dtsi @@ -179,7 +179,7 @@ * ssp0 and spi1 are shared pins; * enable one in your board dts, as needed. */ - ssp0: ssp@20084000 { + ssp0: spi@20084000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x20084000 0x1000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; @@ -199,7 +199,7 @@ * ssp1 and spi2 are shared pins; * enable one in your board dts, as needed. */ - ssp1: ssp@2008c000 { + ssp1: spi@2008c000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x2008c000 0x1000>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm/ls1021a-qds.dts b/dts/src/arm/ls1021a-qds.dts index 499f41a2c6..923a257605 100644 --- a/dts/src/arm/ls1021a-qds.dts +++ b/dts/src/arm/ls1021a-qds.dts @@ -1,5 +1,6 @@ /* * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -235,6 +236,7 @@ #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; + big-endian; bank-width = <2>; device-width = <1>; }; diff --git a/dts/src/arm/ls1021a-twr.dts b/dts/src/arm/ls1021a-twr.dts index f0c949d748..8b48c3c7cd 100644 --- a/dts/src/arm/ls1021a-twr.dts +++ b/dts/src/arm/ls1021a-twr.dts @@ -1,5 +1,6 @@ /* * Copyright 2013-2014 Freescale Semiconductor, Inc. + * Copyright 2018 NXP * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -203,6 +204,7 @@ #size-cells = <1>; compatible = "cfi-flash"; reg = <0x0 0x0 0x8000000>; + big-endian; bank-width = <2>; device-width = <1>; }; diff --git a/dts/src/arm/ls1021a.dtsi b/dts/src/arm/ls1021a.dtsi index f18490548c..bdd6e66a79 100644 --- a/dts/src/arm/ls1021a.dtsi +++ b/dts/src/arm/ls1021a.dtsi @@ -163,7 +163,7 @@ big-endian; }; - qspi: quadspi@1550000 { + qspi: spi@1550000 { compatible = "fsl,ls1021a-qspi"; #address-cells = <1>; #size-cells = <0>; @@ -330,7 +330,7 @@ }; }; - dspi0: dspi@2100000 { + dspi0: spi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; @@ -343,7 +343,7 @@ status = "disabled"; }; - dspi1: dspi@2110000 { + dspi1: spi@2110000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; #size-cells = <0>; @@ -364,6 +364,8 @@ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 1>; + dma-names = "tx", "rx"; + dmas = <&edma0 1 39>, <&edma0 1 38>; status = "disabled"; }; @@ -375,6 +377,8 @@ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 1>; + dma-names = "tx", "rx"; + dmas = <&edma0 1 37>, <&edma0 1 36>; status = "disabled"; }; @@ -386,6 +390,8 @@ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; clock-names = "i2c"; clocks = <&clockgen 4 1>; + dma-names = "tx", "rx"; + dmas = <&edma0 1 35>, <&edma0 1 34>; status = "disabled"; }; diff --git a/dts/src/arm/meson8.dtsi b/dts/src/arm/meson8.dtsi index d77dcf890c..7162e0ca05 100644 --- a/dts/src/arm/meson8.dtsi +++ b/dts/src/arm/meson8.dtsi @@ -194,7 +194,7 @@ #clock-cells = <1>; #reset-cells = <1>; compatible = "amlogic,meson8-clkc"; - reg = <0x8000 0x4>, <0x4000 0x460>; + reg = <0x8000 0x4>, <0x4000 0x400>; }; reset: reset-controller@4404 { diff --git a/dts/src/arm/meson8b-ec100.dts b/dts/src/arm/meson8b-ec100.dts new file mode 100644 index 0000000000..0872f6e3ab --- /dev/null +++ b/dts/src/arm/meson8b-ec100.dts @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "meson8b.dtsi" + +/ { + model = "Endless Computers Endless Mini"; + compatible = "endless,ec100", "amlogic,meson8b"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x40000000 0x40000000>; + }; + + gpio-keys { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + pal-switch { + label = "pal"; + linux,input-type = <EV_SW>; + linux,code = <KEY_SWITCHVIDEOMODE>; + gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>; + }; + + ntsc-switch { + label = "ntsc"; + linux,input-type = <EV_SW>; + linux,code = <KEY_SWITCHVIDEOMODE>; + gpios = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>; + }; + + power-button { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio GPIOH_9 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + /* + * shutdown is managed by the EC (embedded micro-controller) + * which is configured through GPIOAO_2 (poweroff GPIO) and + * GPIOAO_7 (power LED, which has to go LOW as well). + */ + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + timeout-ms = <20000>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "ec100:red:power"; + /* + * Needs to go LOW (together with the poweroff GPIO) + * during shutdown to allow the EC (embedded + * micro-controller) to shutdown the system. Setting + * the output to LOW signals the EC to start a + * "breathing"/pulsing effect until the power is fully + * turned off. + */ + gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + + regulator-name = "USB_VBUS"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vcc_5v: regulator-vcc5v { + compatible = "regulator-fixed"; + + regulator-name = "VCC5V"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>; + + regulator-boot-on; + regulator-always-on; + }; + + vcck: regulator-vcck { + compatible = "pwm-regulator"; + + regulator-name = "VCCK"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + pwms = <&pwm_cd 0 1148 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&cpu0 { + cpu-supply = <&vcck>; +}; + +ðmac { + status = "okay"; + + pinctrl-0 = <ð_rmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + + snps,reset-gpio = <&gpio GPIOH_4 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* IC Plus IP101A/G (0x02430c54) */ + reg = <0>; + }; + }; +}; + +&i2c_A { + status = "okay"; + pinctrl-0 = <&i2c_a_pins>; + pinctrl-names = "default"; + + rt5640: codec@1c { + compatible = "realtek,rt5640"; + reg = <0x1c>; + interrupt-parent = <&gpio_intc>; + interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */ + realtek,in1-differential; + }; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + +&sdio { + status = "okay"; + + pinctrl-0 = <&sd_b_pins>; + pinctrl-names = "default"; + + /* SD card */ + sd_card_slot: slot@1 { + compatible = "mmc-slot"; + reg = <1>; + status = "okay"; + + bus-width = <4>; + no-sdio; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vcc_3v3>; + }; +}; + +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_c1_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_XTAL>; + clock-names = "clkin0"; +}; + +/* exposed through the pin headers labeled "URDUG1" on the top of the PCB */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +/* + * connected to the Bluetooth part of the RTL8723BS SDIO wifi / Bluetooth + * combo chip. This is only available on the variant with 2GB RAM. + */ +&uart_B { + status = "okay"; + pinctrl-0 = <&uart_b0_pins>, <&uart_b0_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&usb1 { + status = "okay"; + vbus-supply = <&usb_vbus>; +}; + +&usb1_phy { + status = "okay"; +}; diff --git a/dts/src/arm/meson8b-odroidc1.dts b/dts/src/arm/meson8b-odroidc1.dts index ef3177d3da..58669abda2 100644 --- a/dts/src/arm/meson8b-odroidc1.dts +++ b/dts/src/arm/meson8b-odroidc1.dts @@ -57,6 +57,10 @@ mmc0 = &sd_card_slot; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x40000000 0x40000000>; }; @@ -71,6 +75,14 @@ }; }; + p5v0: regulator-p5v0 { + compatible = "regulator-fixed"; + + regulator-name = "P5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + tflash_vdd: regulator-tflash_vdd { /* * signal name from schematics: TFLASH_VDD_EN @@ -81,6 +93,8 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -92,6 +106,8 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + /* * signal name from schematics: TF_3V3N_1V8_EN */ @@ -101,6 +117,86 @@ states = <3300000 0 1800000 1>; }; + + vcc_1v8: regulator-vcc-1v8 { + /* + * RICHTEK RT9179 configured for a fixed output voltage of + * 1.8V. This supplies not only VCC1V8 but also IOREF_1V8 and + * VDD1V8 according to the schematics. + */ + compatible = "regulator-fixed"; + + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&p5v0>; + }; + + vcc_3v3: regulator-vcc-3v3 { + /* + * Monolithic Power Systems MP2161 configured for a fixed + * output voltage of 3.3V. This supplies not only VCC3V3 but + * also VDD3V3 and VDDIO_AO3V3 according to the schematics. + */ + compatible = "regulator-fixed"; + + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&p5v0>; + }; + + vcck: regulator-vcck { + /* Monolithic Power Systems MP2161 */ + compatible = "pwm-regulator"; + + regulator-name = "VCCK"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + vin-supply = <&p5v0>; + + pwms = <&pwm_cd 0 12218 0>; + pwm-dutycycle-range = <91 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vddc_ddr: regulator-vddc-ddr { + /* + * Monolithic Power Systems MP2161 configured for a fixed + * output voltage of 1.5V. This supplies not only DDR_VDDC but + * also DDR3_1V5 according to the schematics. + */ + compatible = "regulator-fixed"; + + regulator-name = "DDR_VDDC"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + vin-supply = <&p5v0>; + }; + + vdd_rtc: regulator-vdd-rtc { + /* + * Torex Semiconductor XC6215 configured for a fixed output of + * 0.9V. + */ + compatible = "regulator-fixed"; + + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&vcc_3v3>; + }; +}; + +&cpu0 { + cpu-supply = <&vcck>; }; ðmac { @@ -154,6 +250,11 @@ pinctrl-names = "default"; }; +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + &sdio { status = "okay"; @@ -180,6 +281,14 @@ }; }; +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_c1_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_XTAL>; + clock-names = "clkin0"; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/dts/src/arm/meson8b.dtsi b/dts/src/arm/meson8b.dtsi index 08f7f6be72..cd1ca9dda1 100644 --- a/dts/src/arm/meson8b.dtsi +++ b/dts/src/arm/meson8b.dtsi @@ -163,7 +163,7 @@ #clock-cells = <1>; #reset-cells = <1>; compatible = "amlogic,meson8b-clkc"; - reg = <0x8000 0x4>, <0x4000 0x460>; + reg = <0x8000 0x4>, <0x4000 0x400>; }; reset: reset-controller@4404 { @@ -223,6 +223,28 @@ }; }; + eth_rmii_pins: eth-rmii { + mux { + groups = "eth_tx_en", + "eth_txd1_0", + "eth_txd0_0", + "eth_rx_clk", + "eth_rx_dv", + "eth_rxd1", + "eth_rxd0", + "eth_mdio_en", + "eth_mdc"; + function = "ethernet"; + }; + }; + + i2c_a_pins: i2c-a { + mux { + groups = "i2c_sda_a", "i2c_sck_a"; + function = "i2c_a"; + }; + }; + sd_b_pins: sd-b { mux { groups = "sd_d0_b", "sd_d1_b", "sd_d2_b", @@ -230,6 +252,29 @@ function = "sd_b"; }; }; + + pwm_c1_pins: pwm-c1 { + mux { + groups = "pwm_c1"; + function = "pwm_c"; + }; + }; + + uart_b0_pins: uart-b0 { + mux { + groups = "uart_tx_b0", + "uart_rx_b0"; + function = "uart_b"; + }; + }; + + uart_b0_cts_rts_pins: uart-b0-cts-rts { + mux { + groups = "uart_cts_b0", + "uart_rts_b0"; + function = "uart_b"; + }; + }; }; }; diff --git a/dts/src/arm/mt7623.dtsi b/dts/src/arm/mt7623.dtsi index 1cdc346a05..d01bdee6f2 100644 --- a/dts/src/arm/mt7623.dtsi +++ b/dts/src/arm/mt7623.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/power/mt2701-power.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/phy/phy.h> +#include <dt-bindings/memory/mt2701-larb-port.h> #include <dt-bindings/reset/mt2701-resets.h> #include <dt-bindings/thermal/thermal.h> @@ -121,6 +122,15 @@ }; }; + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + system_clk: dummy13m { compatible = "fixed-clock"; clock-frequency = <13000000>; @@ -277,6 +287,17 @@ clock-names = "system-clk", "rtc-clk"; }; + smi_common: smi@1000c000 { + compatible = "mediatek,mt7623-smi-common", + "mediatek,mt2701-smi-common"; + reg = <0 0x1000c000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_SMI>, + <&mmsys CLK_MM_SMI_COMMON>, + <&infracfg CLK_INFRA_SMI>; + clock-names = "apb", "smi", "async"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; + pwrap: pwrap@1000d000 { compatible = "mediatek,mt7623-pwrap", "mediatek,mt2701-pwrap"; @@ -308,6 +329,17 @@ reg = <0 0x10200100 0 0x1c>; }; + iommu: mmsys_iommu@10205000 { + compatible = "mediatek,mt7623-m4u", + "mediatek,mt2701-m4u"; + reg = <0 0x10205000 0 0x1000>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_M4U>; + clock-names = "bclk"; + mediatek,larbs = <&larb0 &larb1 &larb2>; + #iommu-cells = <1>; + }; + efuse: efuse@10206000 { compatible = "mediatek,mt7623-efuse", "mediatek,mt8173-efuse"; @@ -683,6 +715,90 @@ status = "disabled"; }; + g3dsys: syscon@13000000 { + compatible = "mediatek,mt7623-g3dsys", + "mediatek,mt2701-g3dsys", + "syscon"; + reg = <0 0x13000000 0 0x200>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt7623-mmsys", + "mediatek,mt2701-mmsys", + "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb0: larb@14010000 { + compatible = "mediatek,mt7623-smi-larb", + "mediatek,mt2701-smi-larb"; + reg = <0 0x14010000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <0>; + clocks = <&mmsys CLK_MM_SMI_LARB0>, + <&mmsys CLK_MM_SMI_LARB0>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>; + }; + + imgsys: syscon@15000000 { + compatible = "mediatek,mt7623-imgsys", + "mediatek,mt2701-imgsys", + "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb2: larb@15001000 { + compatible = "mediatek,mt7623-smi-larb", + "mediatek,mt2701-smi-larb"; + reg = <0 0x15001000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <2>; + clocks = <&imgsys CLK_IMG_SMI_COMM>, + <&imgsys CLK_IMG_SMI_COMM>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + }; + + jpegdec: jpegdec@15004000 { + compatible = "mediatek,mt7623-jpgdec", + "mediatek,mt2701-jpgdec"; + reg = <0 0x15004000 0 0x1000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>; + clocks = <&imgsys CLK_IMG_JPGDEC_SMI>, + <&imgsys CLK_IMG_JPGDEC>; + clock-names = "jpgdec-smi", + "jpgdec"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>; + mediatek,larb = <&larb2>; + iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>, + <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>; + }; + + vdecsys: syscon@16000000 { + compatible = "mediatek,mt7623-vdecsys", + "mediatek,mt2701-vdecsys", + "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + larb1: larb@16010000 { + compatible = "mediatek,mt7623-smi-larb", + "mediatek,mt2701-smi-larb"; + reg = <0 0x16010000 0 0x1000>; + mediatek,smi = <&smi_common>; + mediatek,larb-id = <1>; + clocks = <&vdecsys CLK_VDEC_CKGEN>, + <&vdecsys CLK_VDEC_LARB>; + clock-names = "apb", "smi"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>; + }; + hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys", @@ -937,6 +1053,14 @@ power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; status = "disabled"; }; + + bdpsys: syscon@1c000000 { + compatible = "mediatek,mt7623-bdpsys", + "mediatek,mt2701-bdpsys", + "syscon"; + reg = <0 0x1c000000 0 0x1000>; + #clock-cells = <1>; + }; }; &pio { diff --git a/dts/src/arm/omap2.dtsi b/dts/src/arm/omap2.dtsi index f1d6de8b3c..000bf16de6 100644 --- a/dts/src/arm/omap2.dtsi +++ b/dts/src/arm/omap2.dtsi @@ -114,7 +114,7 @@ dma-names = "tx", "rx"; }; - mcspi1: mcspi@48098000 { + mcspi1: spi@48098000 { compatible = "ti,omap2-mcspi"; ti,hwmods = "mcspi1"; reg = <0x48098000 0x100>; @@ -125,7 +125,7 @@ "tx2", "rx2", "tx3", "rx3"; }; - mcspi2: mcspi@4809a000 { + mcspi2: spi@4809a000 { compatible = "ti,omap2-mcspi"; ti,hwmods = "mcspi2"; reg = <0x4809a000 0x100>; diff --git a/dts/src/arm/omap2430.dtsi b/dts/src/arm/omap2430.dtsi index 84635eeb99..7f57af2f10 100644 --- a/dts/src/arm/omap2430.dtsi +++ b/dts/src/arm/omap2430.dtsi @@ -285,7 +285,7 @@ ti,timer-alwon; }; - mcspi3: mcspi@480b8000 { + mcspi3: spi@480b8000 { compatible = "ti,omap2-mcspi"; ti,hwmods = "mcspi3"; reg = <0x480b8000 0x100>; diff --git a/dts/src/arm/omap3-beagle-xm.dts b/dts/src/arm/omap3-beagle-xm.dts index d80587de0b..9985ee2aae 100644 --- a/dts/src/arm/omap3-beagle-xm.dts +++ b/dts/src/arm/omap3-beagle-xm.dts @@ -160,10 +160,11 @@ clocks = <&emu_src_ck>; clock-names = "apb_pclk"; - port { - etb_in: endpoint { - slave-mode; - remote-endpoint = <&etm_out>; + in-ports { + port { + etb_in: endpoint { + remote-endpoint = <&etm_out>; + }; }; }; }; @@ -174,9 +175,11 @@ clocks = <&emu_src_ck>; clock-names = "apb_pclk"; - port { - etm_out: endpoint { - remote-endpoint = <&etb_in>; + out-ports { + port { + etm_out: endpoint { + remote-endpoint = <&etb_in>; + }; }; }; }; diff --git a/dts/src/arm/omap3-beagle.dts b/dts/src/arm/omap3-beagle.dts index 3ca8991a6c..91bb50ad9a 100644 --- a/dts/src/arm/omap3-beagle.dts +++ b/dts/src/arm/omap3-beagle.dts @@ -147,10 +147,11 @@ clocks = <&emu_src_ck>; clock-names = "apb_pclk"; - port { - etb_in: endpoint { - slave-mode; - remote-endpoint = <&etm_out>; + in-ports { + port { + etb_in: endpoint { + remote-endpoint = <&etm_out>; + }; }; }; }; @@ -161,9 +162,11 @@ clocks = <&emu_src_ck>; clock-names = "apb_pclk"; - port { - etm_out: endpoint { - remote-endpoint = <&etb_in>; + out-ports { + port { + etm_out: endpoint { + remote-endpoint = <&etb_in>; + }; }; }; }; diff --git a/dts/src/arm/omap3-gta04.dtsi b/dts/src/arm/omap3-gta04.dtsi index ac830b9177..d5fe553922 100644 --- a/dts/src/arm/omap3-gta04.dtsi +++ b/dts/src/arm/omap3-gta04.dtsi @@ -10,6 +10,7 @@ /dts-v1/; #include "omap36xx.dtsi" +#include <dt-bindings/input/input.h> / { model = "OMAP3 GTA04"; @@ -28,6 +29,7 @@ aliases { display0 = &lcd; + display1 = &tv0; }; /* fixed 26MHz oscillator */ @@ -42,12 +44,27 @@ aux-button { label = "aux"; - linux,code = <169>; + linux,code = <KEY_PHONE>; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; wakeup-source; }; }; + antenna-detect { + compatible = "gpio-keys"; + + gps_antenna_button: gps-antenna-button { + label = "GPS_EXT_ANT"; + linux,input-type = <EV_SW>; + linux,code = <SW_LINEIN_INSERT>; + gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* GPIO144 */ + interrupt-parent = <&gpio5>; + interrupts = <16 IRQ_TYPE_EDGE_BOTH>; + debounce-interval = <10>; + wakeup-source; + }; + }; + sound { compatible = "ti,omap-twl4030"; ti,model = "gta04"; @@ -55,7 +72,7 @@ ti,mcbsp = <&mcbsp2>; }; - /* GSM audio */ + /* GSM audio */ sound_telephony { compatible = "simple-audio-card"; simple-audio-card,name = "GTA04 voice"; @@ -78,7 +95,7 @@ #sound-dai-cells = <0>; }; - spi_lcd { + spi_lcd: spi_lcd { compatible = "spi-gpio"; #address-cells = <0x1>; #size-cells = <0x0>; @@ -131,7 +148,7 @@ }; tv0: connector { - compatible = "svideo-connector"; + compatible = "composite-video-connector"; label = "tv"; port { @@ -143,7 +160,7 @@ tv_amp: opa362 { compatible = "ti,opa362"; - enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; /* GPIO_23 to enable video out amplifier */ ports { #address-cells = <1>; @@ -169,6 +186,42 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */ }; + + /* devconf0 setup for mcbsp1 clock pins */ + pinmux_mcbsp1@48002274 { + compatible = "pinctrl-single"; + reg = <0x48002274 4>; /* CONTROL_DEVCONF0 */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7>; /* MCBSP1 CLK pinmux */ + #pinctrl-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_devconf0_pins>; + mcbsp1_devconf0_pins: pinmux_mcbsp1_devconf0_pins { + /* offset bits mask */ + pinctrl-single,bits = <0x00 0x08 0x1c>; /* set MCBSP1_CLKR */ + }; + }; + + /* devconf1 setup for tvout pins */ + pinmux_tv_out@480022d8 { + compatible = "pinctrl-single"; + reg = <0x480022d8 4>; /* CONTROL_DEVCONF1 */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x81>; /* TV out pin control */ + #pinctrl-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&tv_acbias_devconf1_pins>; + tv_acbias_devconf1_pins: pinmux_tv_acbias_devconf1_pins { + /* offset bits mask */ + pinctrl-single,bits = <0x00 0x40800 0x40800>; /* set TVOUTBYPASS and TVOUTACEN */ + }; + }; }; &omap3_pmx_core { @@ -220,14 +273,14 @@ >; }; - backlight_pins: backlight_pins_pimnux { + backlight_pins: backlight_pins_pinmux { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */ >; }; dss_dpi_pins: pinmux_dss_dpi_pins { - pinctrl-single,pins = < + pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ @@ -265,6 +318,12 @@ >; }; + bmp085_pins: pinmux_bmp085_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2136, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio113 */ + >; + }; + bma180_pins: pinmux_bma180_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */ @@ -282,6 +341,78 @@ OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */ >; }; + + penirq_pins: pinmux_penirq_pins { + pinctrl-single,pins = < + /* here we could enable to wakeup the cpu from suspend by a pen touch */ + OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio160 */ + >; + }; + + camera_pins: pinmux_camera_pins { + pinctrl-single,pins = < + /* set up parallel camera interface */ + OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_hs */ + OMAP3_CORE1_IOPAD(0x210e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_vs */ + OMAP3_CORE1_IOPAD(0x2110, PIN_OUTPUT | MUX_MODE0) /* cam_xclka */ + OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_pclk */ + OMAP3_CORE1_IOPAD(0x2114, PIN_OUTPUT | MUX_MODE4) /* cam_fld = gpio_98 */ + OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d0 */ + OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d1 */ + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d2 */ + OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d3 */ + OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d4 */ + OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d5 */ + OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d6 */ + OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d7 */ + OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d8 */ + OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d9 */ + OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */ + OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* cam_d10 */ + OMAP3_CORE1_IOPAD(0x212e, PIN_OUTPUT | MUX_MODE0) /* cam_xclkb */ + OMAP3_CORE1_IOPAD(0x2130, PIN_OUTPUT | MUX_MODE4) /* cam_wen = gpio_167 */ + OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLDOWN | MUX_MODE4) /* cam_strobe */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT | MUX_MODE4) /* mcbsp1_clkr.mcbsp1_clkr - gpio_156 FM interrupt */ + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_clkr.mcbsp1_fsr */ + OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dx */ + OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0) /* mcbsp1_dx.mcbsp1_dr */ + /* mcbsp_clks is used as PENIRQ */ + /* OMAP3_CORE1_IOPAD(0x2194, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp_clks */ + OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0) /* mcbsp_clks.mcbsp1_fsx */ + OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0) /* mcbsp1_clkx.mcbsp1_clkx */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2_dx */ + >; + }; + + mcbsp3_pins: pinmux_mcbsp3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216c, PIN_OUTPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dx */ + OMAP3_CORE1_IOPAD(0x216e, PIN_INPUT | MUX_MODE0) /* mcbsp3_dx.mcbsp3_dr */ + OMAP3_CORE1_IOPAD(0x2170, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_clkx */ + OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE0) /* mcbsp3_clkx.mcbsp3_fsx */ + >; + }; + + mcbsp4_pins: pinmux_mcbsp4_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_clkx */ + OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_clkx.mcbsp4_dr */ + OMAP3_CORE1_IOPAD(0x218a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcbsp4_dx.mcbsp4_fsx */ + >; + }; }; &omap3_pmx_core2 { @@ -347,6 +478,8 @@ bmp085@77 { compatible = "bosch,bmp085"; reg = <0x77>; + pinctrl-names = "default"; + pinctrl-0 = <&bmp085_pins>; interrupt-parent = <&gpio4>; interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */ }; @@ -402,7 +535,7 @@ reg = <0x4>; }; - wifi_reset: wifi_reset@6 { + wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */ reg = <0x6>; compatible = "gpio"; }; @@ -422,10 +555,19 @@ tsc2007@48 { compatible = "ti,tsc2007"; reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&penirq_pins>; interrupt-parent = <&gpio6>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; /* GPIO_160 */ - gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; + gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* GPIO_160 */ ti,x-plate-ohms = <600>; + touchscreen-size-x = <480>; + touchscreen-size-y = <640>; + touchscreen-max-pressure = <1000>; + touchscreen-fuzz-x = <3>; + touchscreen-fuzz-y = <8>; + touchscreen-fuzz-pressure = <10>; + touchscreen-inverted-y; }; /* RFID EEPROM */ @@ -462,6 +604,7 @@ vmmc-supply = <&vmmc1>; bus-width = <4>; ti,non-removable; + broken-cd; /* hardware has no CD */ }; &mmc2 { @@ -476,6 +619,19 @@ status = "disabled"; }; +#define BIT(x) (1 << (x)) +&twl_gpio { + /* pullups: BIT(2) */ + ti,pullups = <BIT(2)>; + /* + * pulldowns: + * BIT(0), BIT(1), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <(BIT(0) | BIT(1) | BIT(6) | BIT(7) | BIT(8) | + BIT(13) | BIT(15) | BIT(16) | BIT(17))>; +}; + &twl_keypad { status = "disabled"; }; @@ -493,6 +649,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>; }; &charger { @@ -510,7 +667,7 @@ &vaux2 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; + regulator-always-on; /* we should never switch off while vio is on! */ }; /* camera */ @@ -531,6 +688,12 @@ regulator-max-microvolt = <3150000>; }; +/* Needed to power the DPI pins */ + +&vpll2 { + regulator-always-on; +}; + &dss { pinctrl-names = "default"; pinctrl-0 = < &dss_dpi_pins >; @@ -551,10 +714,14 @@ vdda-supply = <&vdac>; + #address-cells = <1>; + #size-cells = <0>; + port { + reg = <0>; venc_out: endpoint { remote-endpoint = <&opa_in>; - ti,channels = <2>; + ti,channels = <1>; ti,invert-polarity; }; }; @@ -569,27 +736,27 @@ interrupt-parent = <&gpmc>; interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ <1 IRQ_TYPE_NONE>; /* termcount */ + ti,nand-ecc-opt = "ham1"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ nand-bus-width = <16>; - ti,nand-ecc-opt = "bch8"; + #address-cells = <1>; + #size-cells = <1>; - gpmc,sync-clk-ps = <0>; + gpmc,device-width = <2>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; gpmc,cs-wr-off-ns = <44>; gpmc,adv-on-ns = <6>; gpmc,adv-rd-off-ns = <34>; gpmc,adv-wr-off-ns = <44>; - gpmc,we-off-ns = <40>; gpmc,oe-off-ns = <54>; + gpmc,we-off-ns = <40>; gpmc,access-ns = <64>; gpmc,rd-cycle-ns = <82>; gpmc,wr-cycle-ns = <82>; gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; - gpmc,device-width = <2>; - - #address-cells = <1>; - #size-cells = <1>; + gpmc,sync-clk-ps = <0>; x-loader@0 { label = "X-Loader"; @@ -598,28 +765,51 @@ bootloaders@80000 { label = "U-Boot"; - reg = <0x80000 0x1e0000>; + reg = <0x80000 0x1c0000>; }; - bootloaders_env@260000 { + bootloaders_env@240000 { label = "U-Boot Env"; - reg = <0x260000 0x20000>; + reg = <0x240000 0x40000>; }; kernel@280000 { label = "Kernel"; - reg = <0x280000 0x400000>; + reg = <0x280000 0x600000>; }; - filesystem@680000 { + filesystem@880000 { label = "File System"; - reg = <0x680000 0xf980000>; + reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */ }; }; }; -&mcbsp2 { - status = "okay"; +&mcbsp1 { /* FM Transceiver PCM */ + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; +}; + +&mcbsp2 { /* TPS65950 I2S */ + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; +}; + +&mcbsp3 { /* Bluetooth PCM */ + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp3_pins>; +}; + +&mcbsp4 { /* GSM voice PCM */ + status = "ok"; + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp4_pins>; }; &hdqw1w { @@ -627,6 +817,22 @@ pinctrl-0 = <&hdq_pins>; }; -&mcbsp4 { - status = "okay"; +/* image signal processor within OMAP3 SoC */ +&isp { + ports { + port@0 { + reg = <0>; + parallel_ep: endpoint { + ti,isp-clock-divisor = <1>; + ti,strobe-mode; + bus-width = <8>;/* Used data lines */ + data-shift = <2>; /* Lines 9:2 are used */ + hsync-active = <0>; /* Active low */ + vsync-active = <1>; /* Active high */ + data-active = <1>;/* Active high */ + pclk-sample = <1>;/* Falling */ + }; + }; + /* port@1 and port@2 are not used by GTA04 */ + }; }; diff --git a/dts/src/arm/omap3-gta04a3.dts b/dts/src/arm/omap3-gta04a3.dts index 3099a892cf..cc92449566 100644 --- a/dts/src/arm/omap3-gta04a3.dts +++ b/dts/src/arm/omap3-gta04a3.dts @@ -9,7 +9,7 @@ #include "omap3-gta04.dtsi" / { - model = "Goldelico GTA04A3"; + model = "Goldelico GTA04A3/Letux 2804"; }; &i2c2 { diff --git a/dts/src/arm/omap3-gta04a4.dts b/dts/src/arm/omap3-gta04a4.dts index c918bb1f05..77afc711fe 100644 --- a/dts/src/arm/omap3-gta04a4.dts +++ b/dts/src/arm/omap3-gta04a4.dts @@ -9,5 +9,5 @@ #include "omap3-gta04.dtsi" / { - model = "Goldelico GTA04A4"; + model = "Goldelico GTA04A4/Letux 2804"; }; diff --git a/dts/src/arm/omap3-gta04a5.dts b/dts/src/arm/omap3-gta04a5.dts index 600b6ca5a1..bd232b1b24 100644 --- a/dts/src/arm/omap3-gta04a5.dts +++ b/dts/src/arm/omap3-gta04a5.dts @@ -1,5 +1,5 @@ /* - * Copyright (C) 2014 H. Nikolaus Schaller <hns@goldelico.com> + * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -9,9 +9,132 @@ #include "omap3-gta04.dtsi" / { - model = "Goldelico GTA04A5"; + model = "Goldelico GTA04A5/Letux 2804"; sound { - ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */ + ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */ + }; + + wlan_en: wlan_en_regulator { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_pins>; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* GPIO_138 */ + + startup-delay-us = <70000>; + enable-active-high; + }; + + pps { + compatible = "pps-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pps_pins>; + + gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>; /* GPIN_114 */ + }; + +}; + +&gpio5 { + irda_en { + gpio-hog; + gpios = <(175-160) GPIO_ACTIVE_HIGH>; + output-high; /* activate gpio_175 to disable IrDA receiver */ + }; +}; + +&omap3_pmx_core { + bt_pins: pinmux_bt_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat5 = mmc3_dat1 = gpio137 */ + >; + }; + + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* mmc2_dat6 = mmc3_dat2 = gpio138 */ + >; + }; + + wlan_irq_pin: pinmux_wlan_irq_pin { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE4) /* mmc2_dat7 = mmc3_dat3 = gpio139 */ + >; + }; + + irda_pins: pinmux_irda { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d0, PIN_OUTPUT_PULLUP | MUX_MODE4) /* mcspi1_cs1 = gpio175 */ + >; + }; + + pps_pins: pinmux_pps_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2138, PIN_INPUT | MUX_MODE4) /* gpin114 */ + >; + }; + +}; + +/* + * for WL183x module see + * http://lxr.free-electrons.com/source/Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt + */ + +&wifi_pwrseq { + /delete-property/ reset-gpios; +}; + +&mmc2 { + vmmc-supply = <&wlan_en>; + bus-width = <4>; + cap-power-off-card; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_irq_pin>; + + #address-cells = <1>; + #size-cells = <0>; + + /delete-property/ mmc-pwrseq; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_139 */ + ref-clock-frequency = <26000000>; + }; +}; + +&i2c2 { + /delete-node/ bmp085@77; + /delete-node/ bma180@41; + /delete-node/ itg3200@68; + /delete-node/ hmc5843@1e; + + bmg160@69 { + compatible = "bosch,bmg160"; + reg = <0x69>; + }; + + bmc150@10 { + compatible = "bosch,bmc150_accel"; + reg = <0x10>; + }; + + bmc150@12 { + compatible = "bosch,bmc150_magn"; + reg = <0x12>; + }; + + bme280@76 { + compatible = "bosch,bme280"; + reg = <0x76>; }; }; diff --git a/dts/src/arm/omap3-gta04a5one.dts b/dts/src/arm/omap3-gta04a5one.dts new file mode 100644 index 0000000000..9b7bbdc344 --- /dev/null +++ b/dts/src/arm/omap3-gta04a5one.dts @@ -0,0 +1,114 @@ +/* + * Copyright (C) 2014-18 H. Nikolaus Schaller <hns@goldelico.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap3-gta04a5.dts" + +&omap3_pmx_core { + model = "Goldelico GTA04A5/Letux 2804 with OneNAND"; + + gpmc_pins: pinmux_gpmc_pins { + pinctrl-single,pins = < + + /* address lines */ + OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */ + OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */ + OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */ + + /* data lines, gpmc_d0..d7 not muxable according to TRM */ + OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */ + OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */ + OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */ + OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */ + OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */ + OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */ + OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */ + OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */ + + /* + * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable + * according to TRM. OneNAND seems to require PIN_INPUT on clock. + */ + OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */ + OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */ + >; + }; +}; + +&gpmc { + /* switch inherited setup to OneNAND */ + + ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */ + pinctrl-names = "default"; + pinctrl-0 = <&gpmc_pins>; + + /delete-node/ nand@0,0; + + onenand@0,0 { + + #address-cells = <1>; + #size-cells = <1>; + compatible = "ti,omap2-onenand"; + reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */ + + gpmc,sync-read; + gpmc,sync-write; + gpmc,burst-length = <16>; + gpmc,burst-read; + gpmc,burst-wrap; + gpmc,burst-write; + gpmc,device-width = <2>; + gpmc,mux-add-data = <2>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <87>; + gpmc,cs-wr-off-ns = <87>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <10>; + gpmc,adv-wr-off-ns = <10>; + gpmc,oe-on-ns = <15>; + gpmc,oe-off-ns = <87>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <87>; + gpmc,rd-cycle-ns = <112>; + gpmc,wr-cycle-ns = <112>; + gpmc,access-ns = <81>; + gpmc,page-burst-access-ns = <15>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <5>; + gpmc,wr-data-mux-bus-ns = <30>; + gpmc,wr-access-ns = <81>; + gpmc,sync-clk-ps = <15000>; + + x-loader@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "U-Boot"; + reg = <0x80000 0x1c0000>; + }; + + bootloaders_env@240000 { + label = "U-Boot Env"; + reg = <0x240000 0x40000>; + }; + + kernel@280000 { + label = "Kernel"; + reg = <0x280000 0x600000>; + }; + + filesystem@880000 { + label = "File System"; + reg = <0x880000 0>; /* 0 = MTDPART_SIZ_FULL */ + }; + + }; +}; diff --git a/dts/src/arm/omap3-n9.dts b/dts/src/arm/omap3-n9.dts index ded5fcf084..1f91646b89 100644 --- a/dts/src/arm/omap3-n9.dts +++ b/dts/src/arm/omap3-n9.dts @@ -40,7 +40,7 @@ }; &i2c3 { - ak8975@0f { + ak8975@f { compatible = "asahi-kasei,ak8975"; reg = <0x0f>; }; diff --git a/dts/src/arm/omap5-board-common.dtsi b/dts/src/arm/omap5-board-common.dtsi index ab6f640b28..bf7ca00f4c 100644 --- a/dts/src/arm/omap5-board-common.dtsi +++ b/dts/src/arm/omap5-board-common.dtsi @@ -700,6 +700,10 @@ vbus-supply = <&smps10_out1_reg>; }; +&dwc3 { + dr_mode = "otg"; +}; + &mcspi1 { }; diff --git a/dts/src/arm/orion5x-linkstation.dtsi b/dts/src/arm/orion5x-linkstation.dtsi index ebd93df5d0..b6c9b85951 100644 --- a/dts/src/arm/orion5x-linkstation.dtsi +++ b/dts/src/arm/orion5x-linkstation.dtsi @@ -156,7 +156,7 @@ &i2c { status = "okay"; - rtc { + rtc@32 { compatible = "ricoh,rs5c372a"; reg = <0x32>; }; diff --git a/dts/src/arm/owl-s500-cubieboard6.dts b/dts/src/arm/owl-s500-cubieboard6.dts index ea4e01bce8..7c96c59b61 100644 --- a/dts/src/arm/owl-s500-cubieboard6.dts +++ b/dts/src/arm/owl-s500-cubieboard6.dts @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Cubietech CubieBoard6 * * Copyright (c) 2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/dts/src/arm/owl-s500-guitar-bb-rev-b.dts b/dts/src/arm/owl-s500-guitar-bb-rev-b.dts index 7be1d2eaf3..e610d49395 100644 --- a/dts/src/arm/owl-s500-guitar-bb-rev-b.dts +++ b/dts/src/arm/owl-s500-guitar-bb-rev-b.dts @@ -1,7 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /dts-v1/; diff --git a/dts/src/arm/owl-s500-guitar.dtsi b/dts/src/arm/owl-s500-guitar.dtsi index 079b2c02cc..81cc39871f 100644 --- a/dts/src/arm/owl-s500-guitar.dtsi +++ b/dts/src/arm/owl-s500-guitar.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * LeMaker Guitar SoM * * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ #include "owl-s500.dtsi" diff --git a/dts/src/arm/owl-s500.dtsi b/dts/src/arm/owl-s500.dtsi index 43c9980a42..5ceb6cc445 100644 --- a/dts/src/arm/owl-s500.dtsi +++ b/dts/src/arm/owl-s500.dtsi @@ -1,9 +1,8 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Actions Semi S500 SoC * * Copyright (c) 2016-2017 Andreas Färber - * - * SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/dts/src/arm/pxa25x.dtsi b/dts/src/arm/pxa25x.dtsi index 95d59be972..8494b57871 100644 --- a/dts/src/arm/pxa25x.dtsi +++ b/dts/src/arm/pxa25x.dtsi @@ -80,6 +80,10 @@ #pwm-cells = <1>; clocks = <&clks CLK_PWM1>; }; + + rtc@40900000 { + clocks = <&clks CLK_OSC32k768>; + }; }; timer@40a00000 { diff --git a/dts/src/arm/pxa27x.dtsi b/dts/src/arm/pxa27x.dtsi index 747f750f67..3228ad5fb7 100644 --- a/dts/src/arm/pxa27x.dtsi +++ b/dts/src/arm/pxa27x.dtsi @@ -71,7 +71,7 @@ clocks = <&clks CLK_PWM1>; }; - pwri2c: i2c@40f000180 { + pwri2c: i2c@40f00180 { compatible = "mrvl,pxa-i2c"; reg = <0x40f00180 0x24>; interrupts = <6>; @@ -113,6 +113,10 @@ status = "disabled"; }; + + rtc@40900000 { + clocks = <&clks CLK_OSC32k768>; + }; }; clocks { diff --git a/dts/src/arm/pxa2xx.dtsi b/dts/src/arm/pxa2xx.dtsi index a520b4c14e..080d5c5169 100644 --- a/dts/src/arm/pxa2xx.dtsi +++ b/dts/src/arm/pxa2xx.dtsi @@ -9,6 +9,25 @@ #include "skeleton.dtsi" #include "dt-bindings/clock/pxa-clock.h" +#define PMGROUP(pin) #pin +#define PMMUX(func, pin, af) \ + mux- ## func { \ + groups = PMGROUP(P ## pin); \ + function = #af; \ + } +#define PMMUX_LPM_LOW(func, pin, af) \ + mux- ## func { \ + groups = PMGROUP(P ## pin); \ + function = #af; \ + low-power-disable; \ + } +#define PMMUX_LPM_HIGH(func, pin, af) \ + mux- ## func { \ + groups = PMGROUP(P ## pin); \ + function = #af; \ + low-power-enable; \ + } + / { model = "Marvell PXA2xx family SoC"; compatible = "marvell,pxa2xx"; @@ -76,7 +95,7 @@ }; }; - ffuart: uart@40100000 { + ffuart: serial@40100000 { compatible = "mrvl,pxa-uart"; reg = <0x40100000 0x30>; interrupts = <22>; @@ -84,7 +103,7 @@ status = "disabled"; }; - btuart: uart@40200000 { + btuart: serial@40200000 { compatible = "mrvl,pxa-uart"; reg = <0x40200000 0x30>; interrupts = <21>; @@ -92,7 +111,7 @@ status = "disabled"; }; - stuart: uart@40700000 { + stuart: serial@40700000 { compatible = "mrvl,pxa-uart"; reg = <0x40700000 0x30>; interrupts = <20>; @@ -100,7 +119,7 @@ status = "disabled"; }; - hwuart: uart@41100000 { + hwuart: serial@41100000 { compatible = "mrvl,pxa-uart"; reg = <0x41100000 0x30>; interrupts = <7>; diff --git a/dts/src/arm/qcom-apq8064.dtsi b/dts/src/arm/qcom-apq8064.dtsi index 4a99c92551..48c3cf4276 100644 --- a/dts/src/arm/qcom-apq8064.dtsi +++ b/dts/src/arm/qcom-apq8064.dtsi @@ -1611,10 +1611,11 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - port { - etb_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out0>; + in-ports { + port { + etb_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; }; }; }; @@ -1626,10 +1627,11 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - port { - tpiu_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out1>; + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; }; }; }; @@ -1640,7 +1642,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -1656,10 +1658,11 @@ remote-endpoint = <&tpiu_in>; }; }; - port@2 { - reg = <0>; + }; + + in-ports { + port { replicator_in: endpoint { - slave-mode; remote-endpoint = <&funnel_out>; }; }; @@ -1673,7 +1676,7 @@ clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; @@ -1687,33 +1690,31 @@ port@0 { reg = <0>; funnel_in0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; port@1 { reg = <1>; funnel_in1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; port@4 { reg = <4>; funnel_in4: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; port@5 { reg = <5>; funnel_in5: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { funnel_out: endpoint { remote-endpoint = <&replicator_in>; }; @@ -1730,9 +1731,11 @@ cpu = <&CPU0>; - port { - etm0_out: endpoint { - remote-endpoint = <&funnel_in0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&funnel_in0>; + }; }; }; }; @@ -1746,9 +1749,11 @@ cpu = <&CPU1>; - port { - etm1_out: endpoint { - remote-endpoint = <&funnel_in1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&funnel_in1>; + }; }; }; }; @@ -1762,9 +1767,11 @@ cpu = <&CPU2>; - port { - etm2_out: endpoint { - remote-endpoint = <&funnel_in4>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&funnel_in4>; + }; }; }; }; @@ -1778,9 +1785,11 @@ cpu = <&CPU3>; - port { - etm3_out: endpoint { - remote-endpoint = <&funnel_in5>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&funnel_in5>; + }; }; }; }; diff --git a/dts/src/arm/qcom-ipq4019.dtsi b/dts/src/arm/qcom-ipq4019.dtsi index 78db67337e..2d56008d8d 100644 --- a/dts/src/arm/qcom-ipq4019.dtsi +++ b/dts/src/arm/qcom-ipq4019.dtsi @@ -52,78 +52,85 @@ cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a7"; - enable-method = "qcom,kpss-acc-v1"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; reg = <0x0>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - operating-points = < - /* kHz uV (fixed) */ - 48000 1100000 - 200000 1100000 - 500000 1100000 - 716000 1100000 - >; clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a7"; - enable-method = "qcom,kpss-acc-v1"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; reg = <0x1>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - operating-points = < - /* kHz uV (fixed) */ - 48000 1100000 - 200000 1100000 - 500000 1100000 - 666000 1100000 - >; clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; - enable-method = "qcom,kpss-acc-v1"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; qcom,acc = <&acc2>; qcom,saw = <&saw2>; reg = <0x2>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - operating-points = < - /* kHz uV (fixed) */ - 48000 1100000 - 200000 1100000 - 500000 1100000 - 666000 1100000 - >; clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a7"; - enable-method = "qcom,kpss-acc-v1"; + enable-method = "qcom,kpss-acc-v2"; + next-level-cache = <&L2>; qcom,acc = <&acc3>; qcom,saw = <&saw3>; reg = <0x3>; clocks = <&gcc GCC_APPS_CLK_SRC>; clock-frequency = <0>; - operating-points = < - /* kHz uV (fixed) */ - 48000 1100000 - 200000 1100000 - 500000 1100000 - 666000 1100000 - >; clock-latency = <256000>; + operating-points-v2 = <&cpu0_opp_table>; }; + + L2: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-48000000 { + opp-hz = /bits/ 64 <48000000>; + clock-latency-ns = <256000>; + }; + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + clock-latency-ns = <256000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + clock-latency-ns = <256000>; + }; + opp-716000000 { + opp-hz = /bits/ 64 <716000000>; + clock-latency-ns = <256000>; + }; }; pmu { @@ -291,49 +298,49 @@ status = "disabled"; }; - acc0: clock-controller@b088000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; - }; + acc0: clock-controller@b088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b088000 0x1000>, <0xb008000 0x1000>; + }; - acc1: clock-controller@b098000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; - }; + acc1: clock-controller@b098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b098000 0x1000>, <0xb008000 0x1000>; + }; - acc2: clock-controller@b0a8000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; - }; + acc2: clock-controller@b0a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>; + }; - acc3: clock-controller@b0b8000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; - }; + acc3: clock-controller@b0b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>; + }; - saw0: regulator@b089000 { - compatible = "qcom,saw2"; - reg = <0x02089000 0x1000>, <0x0b009000 0x1000>; + saw0: regulator@b089000 { + compatible = "qcom,saw2"; + reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>; regulator; - }; + }; - saw1: regulator@b099000 { - compatible = "qcom,saw2"; - reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>; - regulator; - }; + saw1: regulator@b099000 { + compatible = "qcom,saw2"; + reg = <0x0b099000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; - saw2: regulator@b0a9000 { - compatible = "qcom,saw2"; - reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>; - regulator; - }; + saw2: regulator@b0a9000 { + compatible = "qcom,saw2"; + reg = <0x0b0a9000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; - saw3: regulator@b0b9000 { - compatible = "qcom,saw2"; - reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>; - regulator; - }; + saw3: regulator@b0b9000 { + compatible = "qcom,saw2"; + reg = <0x0b0b9000 0x1000>, <0x0b009000 0x1000>; + regulator; + }; blsp1_uart1: serial@78af000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; @@ -387,7 +394,7 @@ #size-cells = <2>; ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 - 0x82000000 0 0x48000000 0x48000000 0 0x10000000>; + 0x82000000 0 0x40300000 0x40300000 0 0x400000>; interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; interrupt-names = "msi"; diff --git a/dts/src/arm/qcom-ipq8064-ap148.dts b/dts/src/arm/qcom-ipq8064-ap148.dts index bcf53e37ed..554c65e7aa 100644 --- a/dts/src/arm/qcom-ipq8064-ap148.dts +++ b/dts/src/arm/qcom-ipq8064-ap148.dts @@ -2,26 +2,8 @@ #include "qcom-ipq8064-v1.0.dtsi" / { - model = "Qualcomm IPQ8064/AP148"; - compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; - - aliases { - serial0 = &gsbi4_serial; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; + model = "Qualcomm Technologies, Inc. IPQ8064/AP-148"; + compatible = "qcom,ipq8064-ap148"; soc { pinmux@800000 { @@ -31,73 +13,22 @@ bias-disable; }; - spi_pins: spi_pins { + buttons_pins: buttons_pins { mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - drive-strength = <10>; - bias-none; + pins = "gpio54", "gpio65"; + drive-strength = <2>; + bias-pull-up; }; }; }; gsbi@16300000 { - qcom,mode = <GSBI_PROT_I2C_UART>; - status = "ok"; - serial@16340000 { + i2c@16380000 { status = "ok"; - }; - - i2c4: i2c@16380000 { - status = "ok"; - clock-frequency = <200000>; - pinctrl-0 = <&i2c4_pins>; pinctrl-names = "default"; }; }; - - gsbi5: gsbi@1a200000 { - qcom,mode = <GSBI_PROT_SPI>; - status = "ok"; - - spi4: spi@1a280000 { - status = "ok"; - spi-max-frequency = <50000000>; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 0>; - - flash: m25p80@0 { - compatible = "s25fl256s1"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partition@0 { - label = "rootfs"; - reg = <0x0 0x1000000>; - }; - - partition@1 { - label = "scratch"; - reg = <0x1000000 0x1000000>; - }; - }; - }; - }; - - sata-phy@1b400000 { - status = "ok"; - }; - - sata@29000000 { - ports-implemented = <0x1>; - status = "ok"; - }; }; }; diff --git a/dts/src/arm/qcom-ipq8064-v1.0.dtsi b/dts/src/arm/qcom-ipq8064-v1.0.dtsi index e1181194e8..e239a04869 100644 --- a/dts/src/arm/qcom-ipq8064-v1.0.dtsi +++ b/dts/src/arm/qcom-ipq8064-v1.0.dtsi @@ -1,2 +1,127 @@ // SPDX-License-Identifier: GPL-2.0 #include "qcom-ipq8064.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Qualcomm Technologies, Inc. IPQ8064-v1.0"; + + aliases { + serial0 = &gsbi4_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + gsbi@16300000 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "ok"; + + serial@16340000 { + status = "ok"; + }; + }; + + gsbi5: gsbi@1a200000 { + qcom,mode = <GSBI_PROT_SPI>; + status = "ok"; + + spi4: spi@1a280000 { + status = "ok"; + spi-max-frequency = <50000000>; + + pinctrl-0 = <&spi_pins>; + pinctrl-names = "default"; + + cs-gpios = <&qcom_pinmux 20 0>; + + flash: m25p80@0 { + compatible = "s25fl256s1"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + reg = <0>; + + partition@0 { + label = "rootfs"; + reg = <0x0 0x1000000>; + }; + + partition@1 { + label = "scratch"; + reg = <0x1000000 0x1000000>; + }; + }; + }; + }; + + sata-phy@1b400000 { + status = "ok"; + }; + + sata@29000000 { + ports-implemented = <0x1>; + status = "ok"; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-0 = <&buttons_pins>; + pinctrl-names = "default"; + + button@1 { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + button@2 { + label = "wps"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&leds_pins>; + pinctrl-names = "default"; + + led@7 { + label = "led_usb1"; + gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbdev"; + default-state = "off"; + }; + + led@8 { + label = "led_usb3"; + gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbdev"; + default-state = "off"; + }; + + led@9 { + label = "status_led_fail"; + gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@26 { + label = "sata_led"; + gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led@53 { + label = "status_led_pass"; + gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + }; +}; diff --git a/dts/src/arm/qcom-ipq8064.dtsi b/dts/src/arm/qcom-ipq8064.dtsi index 70790ac242..f793cd1ad6 100644 --- a/dts/src/arm/qcom-ipq8064.dtsi +++ b/dts/src/arm/qcom-ipq8064.dtsi @@ -2,8 +2,11 @@ /dts-v1/; #include "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-ipq806x.h> #include <dt-bindings/clock/qcom,lcc-ipq806x.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/reset/qcom,gcc-ipq806x.h> #include <dt-bindings/soc/qcom,gsbi.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -114,6 +117,61 @@ interrupt-controller; #interrupt-cells = <2>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + + pcie0_pins: pcie0_pinmux { + mux { + pins = "gpio3"; + function = "pcie1_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + pcie1_pins: pcie1_pinmux { + mux { + pins = "gpio48"; + function = "pcie2_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + pcie2_pins: pcie2_pinmux { + mux { + pins = "gpio63"; + function = "pcie3_rst"; + drive-strength = <12>; + bias-disable; + }; + }; + + spi_pins: spi_pins { + mux { + pins = "gpio18", "gpio19", "gpio21"; + function = "gsbi5"; + drive-strength = <10>; + bias-none; + }; + }; + + leds_pins: leds_pins { + mux { + pins = "gpio7", "gpio8", "gpio9", + "gpio26", "gpio53"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + output-low; + }; + }; + + buttons_pins: buttons_pins { + mux { + pins = "gpio54"; + drive-strength = <2>; + bias-pull-up; + }; + }; }; intc: interrupt-controller@2000000 { @@ -373,5 +431,233 @@ #reset-cells = <1>; }; + pcie0: pci@1b500000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b500000 0x1000 + 0x1b502000 0x80 + 0x1b600000 0x100 + 0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_A_CLK>, + <&gcc PCIE_H_CLK>, + <&gcc PCIE_PHY_CLK>, + <&gcc PCIE_AUX_CLK>, + <&gcc PCIE_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_ACLK_RESET>, + <&gcc PCIE_HCLK_RESET>, + <&gcc PCIE_POR_RESET>, + <&gcc PCIE_PCI_RESET>, + <&gcc PCIE_PHY_RESET>, + <&gcc PCIE_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + + status = "disabled"; + perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; + }; + + pcie1: pci@1b700000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b700000 0x1000 + 0x1b702000 0x80 + 0x1b800000 0x100 + 0x31f00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <1>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_1_A_CLK>, + <&gcc PCIE_1_H_CLK>, + <&gcc PCIE_1_PHY_CLK>, + <&gcc PCIE_1_AUX_CLK>, + <&gcc PCIE_1_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_1_ACLK_RESET>, + <&gcc PCIE_1_HCLK_RESET>, + <&gcc PCIE_1_POR_RESET>, + <&gcc PCIE_1_PCI_RESET>, + <&gcc PCIE_1_PHY_RESET>, + <&gcc PCIE_1_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + + status = "disabled"; + perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; + }; + + pcie2: pci@1b900000 { + compatible = "qcom,pcie-ipq8064"; + reg = <0x1b900000 0x1000 + 0x1b902000 0x80 + 0x1ba00000 0x100 + 0x35f00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <2>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */ + 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ + + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc PCIE_2_A_CLK>, + <&gcc PCIE_2_H_CLK>, + <&gcc PCIE_2_PHY_CLK>, + <&gcc PCIE_2_AUX_CLK>, + <&gcc PCIE_2_ALT_REF_CLK>; + clock-names = "core", "iface", "phy", "aux", "ref"; + + assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>; + assigned-clock-rates = <100000000>; + + resets = <&gcc PCIE_2_ACLK_RESET>, + <&gcc PCIE_2_HCLK_RESET>, + <&gcc PCIE_2_POR_RESET>, + <&gcc PCIE_2_PCI_RESET>, + <&gcc PCIE_2_PHY_RESET>, + <&gcc PCIE_2_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; + + pinctrl-0 = <&pcie2_pins>; + pinctrl-names = "default"; + + status = "disabled"; + perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; + }; + + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sdcc1bam:dma@12402000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12402000 0x8000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc3bam:dma@12182000 { + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC3_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sdcc@12400000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12400000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <96000000>; + non-removable; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-1_8v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + }; + + sdcc@12180000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <192000000>; + #mmc-ddr-1_8v; + sd-uhs-sdr104; + sd-uhs-ddr50; + vqmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc3bam 2>, <&sdcc3bam 1>; + dma-names = "tx", "rx"; + }; + }; }; }; diff --git a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts index c2dc9d0948..ed8f064d08 100644 --- a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -241,6 +241,33 @@ bias-pull-up; }; }; + + i2c3_pins: i2c3 { + mux { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + }; + + i2c12_pins: i2c12 { + mux { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-disable; + }; + }; + + mpu6515_pin: mpu6515 { + irq { + pins = "gpio73"; + function = "gpio"; + bias-disable; + input-enable; + }; + }; }; sdhci@f9824900 { @@ -277,6 +304,62 @@ linux,code = <KEY_VOLUMEDOWN>; }; }; + + i2c@f9968000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c12_pins>; + clock-frequency = <100000>; + qcom,src-freq = <50000000>; + + mpu6515@68 { + compatible = "invensense,mpu6515"; + reg = <0x68>; + interrupts-extended = <&msmgpio 73 IRQ_TYPE_EDGE_FALLING>; + vddio-supply = <&pm8941_lvs1>; + + pinctrl-names = "default"; + pinctrl-0 = <&mpu6515_pin>; + + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + ak8963@f { + compatible = "asahi-kasei,ak8963"; + reg = <0x0f>; + // Currently only works in polling mode. + // gpios = <&msmgpio 61 0>; + vid-supply = <&pm8941_lvs1>; + vdd-supply = <&pm8941_l17>; + }; + + bmp280@76 { + compatible = "bosch,bmp280"; + reg = <0x76>; + vdda-supply = <&pm8941_lvs1>; + vddd-supply = <&pm8941_l17>; + }; + }; + }; + }; + + i2c@f9925000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; + clock-frequency = <100000>; + qcom,src-freq = <50000000>; + + avago_apds993@39 { + compatible = "avago,apds9930"; + reg = <0x39>; + interrupts-extended = <&msmgpio 61 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l17>; + vddio-supply = <&pm8941_lvs1>; + led-max-microamp = <100000>; + amstaos,proximity-diodes = <0>; + }; + }; }; &spmi_bus { diff --git a/dts/src/arm/qcom-msm8974.dtsi b/dts/src/arm/qcom-msm8974.dtsi index d9019a49b2..aba159d5a9 100644 --- a/dts/src/arm/qcom-msm8974.dtsi +++ b/dts/src/arm/qcom-msm8974.dtsi @@ -67,7 +67,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 0xf04>; CPU0: cpu@0 { compatible = "qcom,krait"; @@ -214,7 +214,7 @@ cpu-pmu { compatible = "qcom,krait-pmu"; - interrupts = <1 7 0xf04>; + interrupts = <GIC_PPI 7 0xf04>; }; clocks { @@ -233,17 +233,17 @@ timer { compatible = "arm,armv7-timer"; - interrupts = <1 2 0xf08>, - <1 3 0xf08>, - <1 4 0xf08>, - <1 1 0xf08>; + interrupts = <GIC_PPI 2 0xf08>, + <GIC_PPI 3 0xf08>, + <GIC_PPI 4 0xf08>, + <GIC_PPI 1 0xf08>; clock-frequency = <19200000>; }; adsp-pil { compatible = "qcom,msm8974-adsp-pil"; - interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, + interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, @@ -275,7 +275,7 @@ qcom,smem = <443>, <429>; interrupt-parent = <&intc>; - interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 10>; @@ -300,7 +300,7 @@ qcom,smem = <435>, <428>; interrupt-parent = <&intc>; - interrupts = <0 27 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 14>; @@ -325,7 +325,7 @@ qcom,smem = <451>, <431>; interrupt-parent = <&intc>; - interrupts = <0 143 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 18>; @@ -364,7 +364,7 @@ modem_smsm: modem@1 { reg = <1>; - interrupts = <0 26 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; interrupt-controller; #interrupt-cells = <2>; @@ -372,7 +372,7 @@ adsp_smsm: adsp@2 { reg = <2>; - interrupts = <0 157 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; interrupt-controller; #interrupt-cells = <2>; @@ -380,7 +380,7 @@ wcnss_smsm: wcnss@7 { reg = <7>; - interrupts = <0 144 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>; interrupt-controller; #interrupt-cells = <2>; @@ -445,50 +445,50 @@ frame@f9021000 { frame-number = <0>; - interrupts = <0 8 0x4>, - <0 7 0x4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9021000 0x1000>, <0xf9022000 0x1000>; }; frame@f9023000 { frame-number = <1>; - interrupts = <0 9 0x4>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9023000 0x1000>; status = "disabled"; }; frame@f9024000 { frame-number = <2>; - interrupts = <0 10 0x4>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9024000 0x1000>; status = "disabled"; }; frame@f9025000 { frame-number = <3>; - interrupts = <0 11 0x4>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9025000 0x1000>; status = "disabled"; }; frame@f9026000 { frame-number = <4>; - interrupts = <0 12 0x4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9026000 0x1000>; status = "disabled"; }; frame@f9027000 { frame-number = <5>; - interrupts = <0 13 0x4>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9027000 0x1000>; status = "disabled"; }; frame@f9028000 { frame-number = <6>; - interrupts = <0 14 0x4>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; reg = <0xf9028000 0x1000>; status = "disabled"; }; @@ -586,7 +586,7 @@ blsp1_uart1: serial@f991d000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991d000 0x1000>; - interrupts = <0 107 0x0>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -595,7 +595,7 @@ blsp1_uart2: serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; - interrupts = <0 108 0x0>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -605,7 +605,8 @@ compatible = "qcom,sdhci-msm-v4"; reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 123 0>, <0 138 0>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>, @@ -618,8 +619,8 @@ compatible = "qcom,sdhci-msm-v4"; reg = <0xf9864900 0x11c>, <0xf9864000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>, - <GIC_SPI 224 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC3_APPS_CLK>, <&gcc GCC_SDCC3_AHB_CLK>, @@ -632,7 +633,8 @@ compatible = "qcom,sdhci-msm-v4"; reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; reg-names = "hc_mem", "core_mem"; - interrupts = <0 125 0>, <0 221 0>; + interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>, @@ -699,25 +701,36 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - interrupts = <0 208 0>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; }; i2c@f9924000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9924000 0x1000>; - interrupts = <0 96 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; }; + blsp_i2c3: i2c@f9925000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9925000 0x1000>; + interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + blsp_i2c8: i2c@f9964000 { status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9964000 0x1000>; - interrupts = <0 102 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -728,7 +741,7 @@ status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9967000 0x1000>; - interrupts = <0 105 IRQ_TYPE_NONE>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; #address-cells = <1>; @@ -737,6 +750,17 @@ dma-names = "tx", "rx"; }; + blsp_i2c12: i2c@f9968000 { + status = "disabled"; + compatible = "qcom,i2c-qup-v2.1.1"; + reg = <0xf9968000 0x1000>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + }; + spmi_bus: spmi@fc4cf000 { compatible = "qcom,spmi-pmic-arb"; reg-names = "core", "intr", "cnfg"; @@ -744,7 +768,7 @@ <0xfc4cb000 0x1000>, <0xfc4ca000 0x1000>; interrupt-names = "periph_irq"; - interrupts = <0 190 0>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <2>; @@ -770,10 +794,11 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - port { - etr_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out0>; + in-ports { + port { + etr_in: endpoint { + remote-endpoint = <&replicator_out0>; + }; }; }; }; @@ -785,10 +810,11 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - port { - tpiu_in: endpoint { - slave-mode; - remote-endpoint = <&replicator_out1>; + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = <&replicator_out1>; + }; }; }; }; @@ -800,7 +826,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; @@ -816,10 +842,11 @@ remote-endpoint = <&tpiu_in>; }; }; - port@2 { - reg = <0>; + }; + + in-ports { + port { replicator_in: endpoint { - slave-mode; remote-endpoint = <&etf_out>; }; }; @@ -833,20 +860,17 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; + out-ports { + port { etf_out: endpoint { remote-endpoint = <&replicator_in>; }; }; - port@1 { - reg = <0>; + }; + + in-ports { + port { etf_in: endpoint { - slave-mode; remote-endpoint = <&merger_out>; }; }; @@ -860,7 +884,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; @@ -873,12 +897,13 @@ port@1 { reg = <1>; merger_in1: endpoint { - slave-mode; remote-endpoint = <&funnel1_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { merger_out: endpoint { remote-endpoint = <&etf_in>; }; @@ -893,7 +918,7 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; @@ -910,12 +935,13 @@ port@5 { reg = <5>; funnel1_in5: endpoint { - slave-mode; remote-endpoint = <&kpss_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { funnel1_out: endpoint { remote-endpoint = <&merger_in1>; }; @@ -930,40 +956,38 @@ clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; clock-names = "apb_pclk", "atclk"; - ports { + in-ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; kpss_in0: endpoint { - slave-mode; remote-endpoint = <&etm0_out>; }; }; port@1 { reg = <1>; kpss_in1: endpoint { - slave-mode; remote-endpoint = <&etm1_out>; }; }; port@2 { reg = <2>; kpss_in2: endpoint { - slave-mode; remote-endpoint = <&etm2_out>; }; }; port@3 { reg = <3>; kpss_in3: endpoint { - slave-mode; remote-endpoint = <&etm3_out>; }; }; - port@8 { - reg = <0>; + }; + + out-ports { + port { kpss_out: endpoint { remote-endpoint = <&funnel1_in5>; }; @@ -980,9 +1004,11 @@ cpu = <&CPU0>; - port { - etm0_out: endpoint { - remote-endpoint = <&kpss_in0>; + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = <&kpss_in0>; + }; }; }; }; @@ -996,9 +1022,11 @@ cpu = <&CPU1>; - port { - etm1_out: endpoint { - remote-endpoint = <&kpss_in1>; + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = <&kpss_in1>; + }; }; }; }; @@ -1012,9 +1040,11 @@ cpu = <&CPU2>; - port { - etm2_out: endpoint { - remote-endpoint = <&kpss_in2>; + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = <&kpss_in2>; + }; }; }; }; @@ -1028,9 +1058,11 @@ cpu = <&CPU3>; - port { - etm3_out: endpoint { - remote-endpoint = <&kpss_in3>; + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = <&kpss_in3>; + }; }; }; }; @@ -1040,21 +1072,21 @@ compatible = "qcom,smd"; adsp { - interrupts = <0 156 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 8>; qcom,smd-edge = <1>; }; modem { - interrupts = <0 25 IRQ_TYPE_EDGE_RISING>; + interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 12>; qcom,smd-edge = <0>; }; rpm { - interrupts = <0 168 1>; + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; diff --git a/dts/src/arm/r8a7743-iwg20d-q7-dbcm-ca.dts b/dts/src/arm/r8a7743-iwg20d-q7-dbcm-ca.dts index 327545119e..0d006aea99 100644 --- a/dts/src/arm/r8a7743-iwg20d-q7-dbcm-ca.dts +++ b/dts/src/arm/r8a7743-iwg20d-q7-dbcm-ca.dts @@ -14,3 +14,7 @@ model = "iW-RainboW-G20D-Q7 RZ/G1M based plus camera daughter board"; compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; }; + +&pciec { + status = "okay"; +}; diff --git a/dts/src/arm/r8a7743-iwg20d-q7.dts b/dts/src/arm/r8a7743-iwg20d-q7.dts index b683db4da8..498e223a5f 100644 --- a/dts/src/arm/r8a7743-iwg20d-q7.dts +++ b/dts/src/arm/r8a7743-iwg20d-q7.dts @@ -13,3 +13,7 @@ model = "iWave Systems RainboW-G20D-Qseven board based on RZ/G1M"; compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743"; }; + +&pciec { + status = "okay"; +}; diff --git a/dts/src/arm/r8a77470-iwg23s-sbc.dts b/dts/src/arm/r8a77470-iwg23s-sbc.dts index e3585daafd..22da819f18 100644 --- a/dts/src/arm/r8a77470-iwg23s-sbc.dts +++ b/dts/src/arm/r8a77470-iwg23s-sbc.dts @@ -35,6 +35,8 @@ phy3: ethernet-phy@3 { reg = <3>; + interrupt-parent = <&gpio5>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; micrel,led-mode = <1>; }; }; @@ -43,6 +45,16 @@ clock-frequency = <20000000>; }; +&pfc { + scif1_pins: scif1 { + groups = "scif1_data_b"; + function = "scif1"; + }; +}; + &scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/dts/src/arm/r8a77470.dtsi b/dts/src/arm/r8a77470.dtsi index 87d32d3e23..9ec78d3d0c 100644 --- a/dts/src/arm/r8a77470.dtsi +++ b/dts/src/arm/r8a77470.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/r8a77470-cpg-mssr.h> +#include <dt-bindings/power/r8a77470-sysc.h> / { compatible = "renesas,r8a77470"; #address-cells = <2>; @@ -16,6 +17,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -23,16 +25,25 @@ reg = <0>; clock-frequency = <1000000000>; clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>; - power-domains = <&sysc 5>; + power-domains = <&sysc R8A77470_PD_CA7_CPU0>; next-level-cache = <&L2_CA7>; }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <1>; + clock-frequency = <1000000000>; + clocks = <&cpg CPG_CORE R8A77470_CLK_Z2>; + power-domains = <&sysc R8A77470_PD_CA7_CPU1>; + next-level-cache = <&L2_CA7>; + }; L2_CA7: cache-controller-0 { compatible = "cache"; cache-unified; cache-level = <2>; - power-domains = <&sysc 21>; + power-domains = <&sysc R8A77470_PD_CA7_SCU>; }; }; @@ -60,6 +71,102 @@ #size-cells = <2>; ranges; + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 23>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 912>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 912>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 23>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 911>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 911>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 910>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 910>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 30>; + gpio-reserved-ranges = <17 10>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 909>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 909>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 908>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 908>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a77470", + "renesas,rcar-gen2-gpio"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&cpg CPG_MOD 907>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 907>; + }; + + pfc: pin-controller@e6060000 { + compatible = "renesas,pfc-r8a77470"; + reg = <0 0xe6060000 0 0x118>; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a77470-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -70,6 +177,12 @@ #reset-cells = <1>; }; + apmu@e6151000 { + compatible = "renesas,r8a77470-apmu", "renesas,apmu"; + reg = <0 0xe6151000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; + rst: reset-controller@e6160000 { compatible = "renesas,r8a77470-rst"; reg = <0 0xe6160000 0 0x100>; @@ -97,7 +210,7 @@ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 407>; }; @@ -124,6 +237,20 @@ reg = <0 0xe6300000 0 0x20000>; }; + i2c4: i2c@e6520000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a77470", + "renesas,rcar-gen2-i2c"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 927>; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + dmac0: dma-controller@e6700000 { compatible = "renesas,dmac-r8a77470", "renesas,rcar-dmac"; @@ -151,7 +278,7 @@ "ch12", "ch13", "ch14"; clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <15>; @@ -184,7 +311,7 @@ "ch12", "ch13", "ch14"; clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <15>; @@ -196,7 +323,7 @@ reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>; interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 812>; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 812>; #address-cells = <1>; #size-cells = <0>; @@ -214,7 +341,7 @@ dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 721>; status = "disabled"; }; @@ -230,7 +357,7 @@ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, <&dmac1 0x2d>, <&dmac1 0x2e>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 720>; status = "disabled"; }; @@ -246,7 +373,7 @@ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, <&dmac1 0x2b>, <&dmac1 0x2c>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 719>; status = "disabled"; }; @@ -262,7 +389,7 @@ dmas = <&dmac0 0x2f>, <&dmac0 0x30>, <&dmac1 0x2f>, <&dmac1 0x30>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 718>; status = "disabled"; }; @@ -278,7 +405,7 @@ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, <&dmac1 0xfb>, <&dmac1 0xfc>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 715>; status = "disabled"; }; @@ -294,11 +421,26 @@ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, <&dmac1 0xfd>, <&dmac1 0xfe>; dma-names = "tx", "rx", "tx", "rx"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 714>; status = "disabled"; }; + sdhi2: sd@ee160000 { + compatible = "renesas,sdhi-r8a77470", + "renesas,rcar-gen2-sdhi"; + reg = <0 0xee160000 0 0x328>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -309,7 +451,7 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; - power-domains = <&sysc 32>; + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>; resets = <&cpg 408>; }; diff --git a/dts/src/arm/r8a7778-bockw.dts b/dts/src/arm/r8a7778-bockw.dts index de808d2ea8..cecb22924e 100644 --- a/dts/src/arm/r8a7778-bockw.dts +++ b/dts/src/arm/r8a7778-bockw.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Reference Device Tree Source for the Bock-W board + * Reference Device Tree Source for the R-Car M1A (R8A77781) Bock-W board * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> diff --git a/dts/src/arm/r8a7778.dtsi b/dts/src/arm/r8a7778.dtsi index 1bce16cc6b..05db0ccad7 100644 --- a/dts/src/arm/r8a7778.dtsi +++ b/dts/src/arm/r8a7778.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for Renesas r8a7778 + * Device Tree Source for the R-Car M1A (R8A77781) SoC * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> diff --git a/dts/src/arm/r8a7779-marzen.dts b/dts/src/arm/r8a7779-marzen.dts index a4d0038363..abc14e7a4c 100644 --- a/dts/src/arm/r8a7779-marzen.dts +++ b/dts/src/arm/r8a7779-marzen.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the Marzen board + * Device Tree Source for the R-Car H1 (R8A77790) Marzen board * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman diff --git a/dts/src/arm/r8a7779.dtsi b/dts/src/arm/r8a7779.dtsi index 6b997bc016..3bc133d948 100644 --- a/dts/src/arm/r8a7779.dtsi +++ b/dts/src/arm/r8a7779.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for Renesas r8a7779 + * Device Tree Source for the R-Car H1 (R8A77790) SoC * * Copyright (C) 2013 Renesas Solutions Corp. * Copyright (C) 2013 Simon Horman @@ -344,7 +344,7 @@ sata: sata@fc600000 { compatible = "renesas,sata-r8a7779", "renesas,rcar-sata"; - reg = <0xfc600000 0x2000>; + reg = <0xfc600000 0x200000>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_SATA>; power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; diff --git a/dts/src/arm/r8a7790-stout.dts b/dts/src/arm/r8a7790-stout.dts index a13a92c266..629da4cee1 100644 --- a/dts/src/arm/r8a7790-stout.dts +++ b/dts/src/arm/r8a7790-stout.dts @@ -318,6 +318,10 @@ interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + onkey { + compatible = "dlg,da9063-onkey"; + }; + rtc { compatible = "dlg,da9063-rtc"; }; diff --git a/dts/src/arm/r8a7790.dtsi b/dts/src/arm/r8a7790.dtsi index 0925bdca43..5a2747758f 100644 --- a/dts/src/arm/r8a7790.dtsi +++ b/dts/src/arm/r8a7790.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7790 SoC + * Device Tree Source for the R-Car H2 (R8A77900) SoC * * Copyright (C) 2015 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. @@ -1559,7 +1559,7 @@ sata0: sata@ee300000 { compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata"; - reg = <0 0xee300000 0 0x2000>; + reg = <0 0xee300000 0 0x200000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 815>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; @@ -1570,7 +1570,7 @@ sata1: sata@ee500000 { compatible = "renesas,sata-r8a7790", "renesas,rcar-gen2-sata"; - reg = <0 0xee500000 0 0x2000>; + reg = <0 0xee500000 0 0x200000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 814>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; diff --git a/dts/src/arm/r8a7791.dtsi b/dts/src/arm/r8a7791.dtsi index 991ac6feed..6f87550245 100644 --- a/dts/src/arm/r8a7791.dtsi +++ b/dts/src/arm/r8a7791.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7791 SoC + * Device Tree Source for the R-Car M2-W (R8A77910) SoC * * Copyright (C) 2013-2015 Renesas Electronics Corporation * Copyright (C) 2013-2014 Renesas Solutions Corp. @@ -1543,7 +1543,7 @@ sata0: sata@ee300000 { compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; - reg = <0 0xee300000 0 0x2000>; + reg = <0 0xee300000 0 0x200000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 815>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; @@ -1554,7 +1554,7 @@ sata1: sata@ee500000 { compatible = "renesas,sata-r8a7791", "renesas,rcar-gen2-sata"; - reg = <0 0xee500000 0 0x2000>; + reg = <0 0xee500000 0 0x200000>; interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 814>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; diff --git a/dts/src/arm/r8a7792.dtsi b/dts/src/arm/r8a7792.dtsi index 63a978ec81..8e9eb4b704 100644 --- a/dts/src/arm/r8a7792.dtsi +++ b/dts/src/arm/r8a7792.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7792 SoC + * Device Tree Source for the R-Car V2H (R8A77920) SoC * * Copyright (C) 2016 Cogent Embedded Inc. */ @@ -829,7 +829,6 @@ du: display@feb00000 { compatible = "renesas,du-r8a7792"; reg = <0 0xfeb00000 0 0x40000>; - reg-names = "du"; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, diff --git a/dts/src/arm/r8a7793-gose.dts b/dts/src/arm/r8a7793-gose.dts index 6b2f3a4fd1..f51601af89 100644 --- a/dts/src/arm/r8a7793-gose.dts +++ b/dts/src/arm/r8a7793-gose.dts @@ -596,6 +596,10 @@ status = "okay"; }; +&cpu0 { + cpu0-supply = <&vdd_dvfs>; +}; + &rwdt { timeout-sec = <60>; status = "okay"; @@ -725,6 +729,18 @@ compatible = "dlg,da9063-watchdog"; }; }; + + vdd_dvfs: regulator@68 { + compatible = "dlg,da9210"; + reg = <0x68>; + interrupt-parent = <&irqc0>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; }; &i2c4 { diff --git a/dts/src/arm/r8a7793.dtsi b/dts/src/arm/r8a7793.dtsi index 620a570307..bf05110fac 100644 --- a/dts/src/arm/r8a7793.dtsi +++ b/dts/src/arm/r8a7793.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7793 SoC + * Device Tree Source for the R-Car M2-N (R8A77930) SoC * * Copyright (C) 2014-2015 Renesas Electronics Corporation */ diff --git a/dts/src/arm/r8a7794-silk.dts b/dts/src/arm/r8a7794-silk.dts index daec965889..60e91ebfa6 100644 --- a/dts/src/arm/r8a7794-silk.dts +++ b/dts/src/arm/r8a7794-silk.dts @@ -405,6 +405,31 @@ clock-frequency = <400000>; }; +&i2c7 { + status = "okay"; + clock-frequency = <100000>; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio3>; + interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + + onkey { + compatible = "dlg,da9063-onkey"; + }; + + rtc { + compatible = "dlg,da9063-rtc"; + }; + + wdt { + compatible = "dlg,da9063-watchdog"; + }; + }; +}; + &mmcif0 { pinctrl-0 = <&mmcif0_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm/r8a7794.dtsi b/dts/src/arm/r8a7794.dtsi index ea2ca4bdaf..8d797d3481 100644 --- a/dts/src/arm/r8a7794.dtsi +++ b/dts/src/arm/r8a7794.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Device Tree Source for the r8a7794 SoC + * Device Tree Source for the R-Car E2 (R8A77940) SoC * * Copyright (C) 2014 Renesas Electronics Corporation * Copyright (C) 2014 Ulrich Hecht @@ -1349,7 +1349,6 @@ du: display@feb00000 { compatible = "renesas,du-r8a7794"; reg = <0 0xfeb00000 0 0x40000>; - reg-names = "du"; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>; diff --git a/dts/src/arm/r9a06g032.dtsi b/dts/src/arm/r9a06g032.dtsi index afe29c95a0..eaf94976ed 100644 --- a/dts/src/arm/r9a06g032.dtsi +++ b/dts/src/arm/r9a06g032.dtsi @@ -7,6 +7,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r9a06g032-sysctrl.h> / { compatible = "renesas,r9a06g032"; @@ -21,14 +22,14 @@ device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0>; - clocks = <&sysctrl 84>; + clocks = <&sysctrl R9A06G032_CLK_A7MP>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <1>; - clocks = <&sysctrl 84>; + clocks = <&sysctrl R9A06G032_CLK_A7MP>; enable-method = "renesas,r9a06g032-smp"; cpu-release-addr = <0 0x4000c204>; }; @@ -77,13 +78,90 @@ }; uart0: serial@40060000 { - compatible = "snps,dw-apb-uart"; + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart"; reg = <0x40060000 0x400>; interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&sysctrl 146>; - clock-names = "baudclk"; + clocks = <&sysctrl R9A06G032_CLK_UART0>, <&sysctrl R9A06G032_HCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart1: serial@40061000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart"; + reg = <0x40061000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART1>, <&sysctrl R9A06G032_HCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart2: serial@40062000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart", "snps,dw-apb-uart"; + reg = <0x40062000 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART2>, <&sysctrl R9A06G032_HCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart3: serial@50000000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; + reg = <0x50000000 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART3>, <&sysctrl R9A06G032_HCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart4: serial@50001000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; + reg = <0x50001000 0x400>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART4>, <&sysctrl R9A06G032_HCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart5: serial@50002000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; + reg = <0x50002000 0x400>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART5>, <&sysctrl R9A06G032_HCLK_UART5>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart6: serial@50003000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; + reg = <0x50003000 0x400>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART6>, <&sysctrl R9A06G032_HCLK_UART6>; + clock-names = "baudclk", "apb_pclk"; + status = "disabled"; + }; + + uart7: serial@50004000 { + compatible = "renesas,r9a06g032-uart", "renesas,rzn1-uart"; + reg = <0x50004000 0x400>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&sysctrl R9A06G032_CLK_UART7>, <&sysctrl R9A06G032_HCLK_UART7>; + clock-names = "baudclk", "apb_pclk"; status = "disabled"; }; diff --git a/dts/src/arm/rk3036.dtsi b/dts/src/arm/rk3036.dtsi index 67f57200d9..d560fc4051 100644 --- a/dts/src/arm/rk3036.dtsi +++ b/dts/src/arm/rk3036.dtsi @@ -733,7 +733,7 @@ /* no rts / cts for uart2 */ }; - spi { + spi-pins { spi_txd:spi-txd { rockchip,pins = <1 29 RK_FUNC_3 &pcfg_pull_default>; }; diff --git a/dts/src/arm/rk3188-radxarock.dts b/dts/src/arm/rk3188-radxarock.dts index 45fd2b302d..4a2890618f 100644 --- a/dts/src/arm/rk3188-radxarock.dts +++ b/dts/src/arm/rk3188-radxarock.dts @@ -93,6 +93,8 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; startup-delay-us = <100000>; vin-supply = <&vcc_io>; }; @@ -315,6 +317,12 @@ }; }; + sd0 { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <RK_GPIO3 1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + usb { host_vbus_drv: host-vbus-drv { rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; diff --git a/dts/src/arm/rk3188.dtsi b/dts/src/arm/rk3188.dtsi index aa123f93f1..b6f7909737 100644 --- a/dts/src/arm/rk3188.dtsi +++ b/dts/src/arm/rk3188.dtsi @@ -56,6 +56,11 @@ }; }; + display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop0_out>, <&vop1_out>; + }; + sram: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x8000>; @@ -69,6 +74,38 @@ }; }; + vop0: vop@1010c000 { + compatible = "rockchip,rk3188-vop"; + reg = <0x1010c000 0x1000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_LCDC0>, <&cru DCLK_LCDC0>, <&cru HCLK_LCDC0>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vop0_out: port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + vop1: vop@1010e000 { + compatible = "rockchip,rk3188-vop"; + reg = <0x1010e000 0x1000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_LCDC1>, <&cru DCLK_LCDC1>, <&cru HCLK_LCDC1>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>; + reset-names = "axi", "ahb", "dclk"; + status = "disabled"; + + vop1_out: port { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + timer3: timer@2000e000 { compatible = "rockchip,rk3188-timer", "rockchip,rk3288-timer"; reg = <0x2000e000 0x20>; @@ -309,6 +346,51 @@ }; }; + lcdc1 { + lcdc1_dclk: lcdc1-dclk { + rockchip,pins = <2 RK_PD0 RK_FUNC_1 &pcfg_pull_none>; + }; + + lcdc1_den: lcdc1-den { + rockchip,pins = <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + }; + + lcdc1_hsync: lcdc1-hsync { + rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_none>; + }; + + lcdc1_vsync: lcdc1-vsync { + rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_none>; + }; + + lcdc1_rgb24: ldcd1-rgb24 { + rockchip,pins = <2 RK_PA0 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA1 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA2 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA3 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA4 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA5 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA6 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PA7 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB0 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB1 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB2 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB3 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB4 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB5 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB6 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PB7 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC0 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC1 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC2 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC3 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC4 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC5 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC6 RK_FUNC_1 &pcfg_pull_none>, + <2 RK_PC7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + pwm0 { pwm0_out: pwm0-out { rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>; diff --git a/dts/src/arm/rk3288-tinker-s.dts b/dts/src/arm/rk3288-tinker-s.dts new file mode 100644 index 0000000000..37093922b4 --- /dev/null +++ b/dts/src/arm/rk3288-tinker-s.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + */ + +/dts-v1/; + +#include "rk3288-tinker.dtsi" + +/ { + model = "Rockchip RK3288 Asus Tinker Board S"; + compatible = "asus,rk3288-tinker-s", "rockchip,rk3288"; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + max-frequency = <150000000>; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + status = "okay"; +}; diff --git a/dts/src/arm/rk3288-tinker.dts b/dts/src/arm/rk3288-tinker.dts index ceade59628..1e43527aa1 100644 --- a/dts/src/arm/rk3288-tinker.dts +++ b/dts/src/arm/rk3288-tinker.dts @@ -5,503 +5,9 @@ /dts-v1/; -#include "rk3288.dtsi" -#include <dt-bindings/input/input.h> +#include "rk3288-tinker.dtsi" / { - model = "Rockchip RK3288 Tinker Board"; + model = "Rockchip RK3288 Asus Tinker Board"; compatible = "asus,rk3288-tinker", "rockchip,rk3288"; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - memory { - reg = <0x0 0x0 0x0 0x80000000>; - device_type = "memory"; - }; - - ext_gmac: external-gmac-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - }; - - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - pinctrl-names = "default"; - pinctrl-0 = <&pwrbtn>; - - button@0 { - gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - label = "GPIO Key Power"; - linux,input-type = <1>; - wakeup-source; - debounce-interval = <100>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - act-led { - gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; - linux,default-trigger="mmc0"; - }; - - heartbeat-led { - gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; - linux,default-trigger="heartbeat"; - }; - - pwr-led { - gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; - }; - }; - - sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,name = "rockchip,tinker-codec"; - simple-audio-card,mclk-fs = <512>; - - simple-audio-card,codec { - sound-dai = <&hdmi>; - }; - - simple-audio-card,cpu { - sound-dai = <&i2s>; - }; - }; - - vcc_sys: vsys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc_sys"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - vcc_sd: sdmmc-regulator { - compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_pwr>; - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - vin-supply = <&vcc_io>; - }; -}; - -&cpu0 { - cpu0-supply = <&vdd_cpu>; -}; - -&gmac { - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - clock_in_out = "input"; - phy-mode = "rgmii"; - phy-supply = <&vcc33_lan>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - snps,reset-gpio = <&gpio4 7 0>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 1000000>; - tx_delay = <0x30>; - rx_delay = <0x10>; - status = "ok"; -}; - -&gpu { - mali-supply = <&vdd_gpu>; - status = "okay"; -}; - -&hdmi { - ddc-i2c-bus = <&i2c5>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - status = "okay"; - - rk808: pmic@1b { - compatible = "rockchip,rk808"; - reg = <0x1b>; - interrupt-parent = <&gpio0>; - interrupts = <4 IRQ_TYPE_LEVEL_LOW>; - #clock-cells = <1>; - clock-output-names = "xin32k", "rk808-clkout2"; - dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>, - <&gpio0 12 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc_sys>; - vcc2-supply = <&vcc_sys>; - vcc3-supply = <&vcc_sys>; - vcc4-supply = <&vcc_sys>; - vcc6-supply = <&vcc_sys>; - vcc7-supply = <&vcc_sys>; - vcc8-supply = <&vcc_io>; - vcc9-supply = <&vcc_io>; - vcc10-supply = <&vcc_io>; - vcc11-supply = <&vcc_sys>; - vcc12-supply = <&vcc_io>; - vddio-supply = <&vcc_io>; - - regulators { - vdd_cpu: DCDC_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1350000>; - regulator-name = "vdd_arm"; - regulator-ramp-delay = <6000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_gpu: DCDC_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd_gpu"; - regulator-ramp-delay = <6000>; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc_ddr"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_io: DCDC_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_io"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc18_ldo1: LDO_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_ldo1"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc33_mipi: LDO_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc33_mipi"; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - vdd_10: LDO_REG3 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd_10"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc18_codec: LDO_REG4 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_codec"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vccio_sd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vdd10_lcd: LDO_REG6 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vdd10_lcd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_18: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc_18"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc18_lcd: LDO_REG8 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcc18_lcd"; - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc33_sd: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc33_sd"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc33_lan: SWITCH_REG2 { - regulator-always-on; - regulator-boot-on; - regulator-name = "vcc33_lan"; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - }; - }; -}; - -&i2c2 { - status = "okay"; -}; - -&i2c5 { - status = "okay"; -}; - -&i2s { - #sound-dai-cells = <0>; - status = "okay"; -}; - -&io_domains { - status = "okay"; - - sdcard-supply = <&vccio_sd>; -}; - -&pinctrl { - pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { - drive-strength = <8>; - }; - - pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { - bias-pull-up; - drive-strength = <8>; - }; - - backlight { - bl_en: bl-en { - rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - buttons { - pwrbtn: pwrbtn { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - eth_phy { - eth_phy_pwr: eth-phy-pwr { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \ - &pcfg_pull_up>; - }; - - dvs_1: dvs-1 { - rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \ - &pcfg_pull_down>; - }; - - dvs_2: dvs-2 { - rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \ - &pcfg_pull_down>; - }; - }; - - sdmmc { - sdmmc_bus4: sdmmc-bus4 { - rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, - <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; - }; - - sdmmc_clk: sdmmc-clk { - rockchip,pins = <6 20 RK_FUNC_1 \ - &pcfg_pull_none_drv_8ma>; - }; - - sdmmc_cmd: sdmmc-cmd { - rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; - }; - - sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - usb { - host_vbus_drv: host-vbus-drv { - rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pwr_3g: pwr-3g { - rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcc18_ldo1>; - status ="okay"; -}; - -&sdmmc { - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <200>; - disable-wp; /* wp not hooked up */ - pinctrl-names = "default"; - pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; - status = "okay"; - vmmc-supply = <&vcc33_sd>; - vqmmc-supply = <&vccio_sd>; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ - rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; - -&uart3 { - status = "okay"; -}; - -&uart4 { - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host1 { - status = "okay"; -}; - -&usb_otg { - status= "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; - -&wdt { - status = "okay"; }; diff --git a/dts/src/arm/rk3288-tinker.dtsi b/dts/src/arm/rk3288-tinker.dtsi new file mode 100644 index 0000000000..aa107ee41b --- /dev/null +++ b/dts/src/arm/rk3288-tinker.dtsi @@ -0,0 +1,502 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + */ + +#include "rk3288.dtsi" +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory { + reg = <0x0 0x0 0x0 0x80000000>; + device_type = "memory"; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + button@0 { + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "GPIO Key Power"; + linux,input-type = <1>; + wakeup-source; + debounce-interval = <100>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + act-led { + gpios=<&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; + linux,default-trigger="mmc0"; + }; + + heartbeat-led { + gpios=<&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>; + linux,default-trigger="heartbeat"; + }; + + pwr-led { + gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "rockchip,tinker-codec"; + simple-audio-card,mclk-fs = <512>; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s>; + }; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + phy-mode = "rgmii"; + phy-supply = <&vcc33_lan>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio4 7 0>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "ok"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + dvs-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>, + <&gpio0 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int &global_pwroff &dvs_1 &dvs_2>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_io>; + vcc9-supply = <&vcc_io>; + vcc10-supply = <&vcc_io>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_io>; + vddio-supply = <&vcc_io>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_arm"; + regulator-ramp-delay = <6000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + regulator-ramp-delay = <6000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc18_ldo1: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_ldo1"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc33_mipi: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc33_mipi"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc18_codec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_codec"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc18_lcd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc33_sd: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_sd"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc33_lan: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_lan"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2s { + #sound-dai-cells = <0>; + status = "okay"; +}; + +&io_domains { + status = "okay"; + + sdcard-supply = <&vccio_sd>; +}; + +&pinctrl { + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + drive-strength = <8>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + backlight { + bl_en: bl-en { + rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + eth_phy { + eth_phy_pwr: eth-phy-pwr { + rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int: pmic-int { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO \ + &pcfg_pull_up>; + }; + + dvs_1: dvs-1 { + rockchip,pins = <RK_GPIO0 11 RK_FUNC_GPIO \ + &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO \ + &pcfg_pull_down>; + }; + }; + + sdmmc { + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>, + <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 \ + &pcfg_pull_none_drv_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; + }; + + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + pwr_3g: pwr-3g { + rockchip,pins = <7 8 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc18_ldo1>; + status ="okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; /* wp not hooked up */ + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + status = "okay"; + vmmc-supply = <&vcc33_sd>; + vqmmc-supply = <&vccio_sd>; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host1 { + status = "okay"; +}; + +&usb_otg { + status= "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/dts/src/arm/s5pv210.dtsi b/dts/src/arm/s5pv210.dtsi index 67358562a6..75f454a210 100644 --- a/dts/src/arm/s5pv210.dtsi +++ b/dts/src/arm/s5pv210.dtsi @@ -120,7 +120,7 @@ interrupts = <30>; wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; + compatible = "samsung,s5pv210-wakeup-eint"; interrupts = <16>; interrupt-parent = <&vic0>; }; diff --git a/dts/src/arm/sama5d2.dtsi b/dts/src/arm/sama5d2.dtsi index 61f68e5c48..843052f14f 100644 --- a/dts/src/arm/sama5d2.dtsi +++ b/dts/src/arm/sama5d2.dtsi @@ -47,6 +47,7 @@ #include <dt-bindings/dma/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/iio/adc/at91-sama5d2_adc.h> / { model = "Atmel SAMA5D2 family SoC"; @@ -58,6 +59,8 @@ serial1 = &uart3; tcb0 = &tcb0; tcb1 = &tcb1; + i2s0 = &i2s0; + i2s1 = &i2s1; }; cpus { @@ -84,10 +87,11 @@ clocks = <&mck>; clock-names = "apb_pclk"; - port { - etb_in: endpoint { - slave-mode; - remote-endpoint = <&etm_out>; + in-ports { + port { + etb_in: endpoint { + remote-endpoint = <&etm_out>; + }; }; }; }; @@ -99,9 +103,11 @@ clocks = <&mck>; clock-names = "apb_pclk"; - port { - etm_out: endpoint { - remote-endpoint = <&etb_in>; + out-ports { + port { + etm_out: endpoint { + remote-endpoint = <&etb_in>; + }; }; }; }; @@ -323,44 +329,6 @@ }; }; - nand0: nand@80000000 { - compatible = "atmel,sama5d2-nand"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - reg = < /* EBI CS3 */ - 0x80000000 0x08000000 - /* SMC PMECC regs */ - 0xf8014070 0x00000490 - /* SMC PMECC Error Location regs */ - 0xf8014500 0x00000200 - /* ROM Galois tables */ - 0x00040000 0x00018000 - >; - interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>; - atmel,nand-addr-offset = <21>; - atmel,nand-cmd-offset = <22>; - atmel,nand-has-dma; - atmel,has-pmecc; - atmel,pmecc-lookup-table-offset = <0x0 0x8000>; - status = "disabled"; - - nfc@c0000000 { - compatible = "atmel,sama5d3-nfc"; - #address-cells = <1>; - #size-cells = <1>; - reg = < /* NFC Command Registers */ - 0xc0000000 0x08000000 - /* NFC HSMC regs */ - 0xf8014000 0x00000070 - /* NFC SRAM banks */ - 0x00100000 0x00100000 - >; - clocks = <&hsmc_clk>; - atmel,write-by-sram; - }; - }; - sdmmc0: sdio-host@a0000000 { compatible = "atmel,sama5d2-sdhci"; reg = <0xa0000000 0x300>; @@ -992,6 +960,24 @@ atmel,clk-output-range = <0 100000000>; }; }; + + i2s_clkmux { + compatible = "atmel,sama5d2-clk-i2s-mux"; + #address-cells = <1>; + #size-cells = <0>; + + i2s0muxck: i2s0_muxclk { + clocks = <&i2s0_clk>, <&i2s0_gclk>; + #clock-cells = <0>; + reg = <0>; + }; + + i2s1muxck: i2s1_muxclk { + clocks = <&i2s1_clk>, <&i2s1_gclk>; + #clock-cells = <0>; + reg = <1>; + }; + }; }; qspi0: spi@f0020000 { @@ -1295,6 +1281,24 @@ clocks = <&clk32k>; }; + i2s0: i2s@f8050000 { + compatible = "atmel,sama5d2-i2s"; + reg = <0xf8050000 0x100>; + interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(31))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(32))>; + dma-names = "tx", "rx"; + clocks = <&i2s0_clk>, <&i2s0_gclk>; + clock-names = "pclk", "gclk"; + assigned-clocks = <&i2s0muxck>; + assigned-clock-parents = <&i2s0_gclk>; + status = "disabled"; + }; + can0: can@f8054000 { compatible = "bosch,m_can"; reg = <0xf8054000 0x4000>, <0x210000 0x4000>; @@ -1437,6 +1441,17 @@ atmel,max-sample-rate-hz = <20000000>; atmel,startup-time-ms = <4>; atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>; + #io-channel-cells = <1>; + status = "disabled"; + }; + + resistive_touch: resistive-touch { + compatible = "resistive-adc-touch"; + io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>, + <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>, + <&adc AT91_SAMA5D2_ADC_P_CHANNEL>; + io-channel-names = "x", "y", "pressure"; + touchscreen-min-pressure = <50000>; status = "disabled"; }; @@ -1488,6 +1503,24 @@ status = "disabled"; }; + i2s1: i2s@fc04c000 { + compatible = "atmel,sama5d2-i2s"; + reg = <0xfc04c000 0x100>; + interrupts = <55 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(33))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(34))>; + dma-names = "tx", "rx"; + clocks = <&i2s1_clk>, <&i2s1_gclk>; + clock-names = "pclk", "gclk"; + assigned-clocks = <&i2s1muxck>; + assigned-parrents = <&i2s1_gclk>; + status = "disabled"; + }; + can1: can@fc050000 { compatible = "bosch,m_can"; reg = <0xfc050000 0x4000>, <0x210000 0x4000>; diff --git a/dts/src/arm/sama5d4.dtsi b/dts/src/arm/sama5d4.dtsi index 92a35a1942..7371f2a046 100644 --- a/dts/src/arm/sama5d4.dtsi +++ b/dts/src/arm/sama5d4.dtsi @@ -1323,13 +1323,13 @@ }; }; - rstc@fc068600 { + reset_controller: rstc@fc068600 { compatible = "atmel,sama5d3-rstc", "atmel,at91sam9g45-rstc"; reg = <0xfc068600 0x10>; clocks = <&clk32k>; }; - shdwc@fc068610 { + shutdown_controller: shdwc@fc068610 { compatible = "atmel,at91sam9x5-shdwc"; reg = <0xfc068610 0x10>; clocks = <&clk32k>; @@ -1342,7 +1342,7 @@ clocks = <&h32ck>; }; - watchdog@fc068640 { + watchdog: watchdog@fc068640 { compatible = "atmel,sama5d4-wdt"; reg = <0xfc068640 0x10>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; @@ -1376,7 +1376,7 @@ }; - pinctrl@fc06a000 { + pinctrl: pinctrl@fc06a000 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus"; diff --git a/dts/src/arm/socfpga.dtsi b/dts/src/arm/socfpga.dtsi index b38f8c2405..2d300396f0 100644 --- a/dts/src/arm/socfpga.dtsi +++ b/dts/src/arm/socfpga.dtsi @@ -22,8 +22,6 @@ #size-cells = <1>; aliases { - ethernet0 = &gmac0; - ethernet1 = &gmac1; serial0 = &uart0; serial1 = &uart1; timer0 = &timer0; @@ -483,10 +481,17 @@ clk-gate = <0xa0 9>; }; + nand_ecc_clk: nand_ecc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&nand_x_clk>; + clk-gate = <0xa0 9>; + }; + nand_clk: nand_clk { #clock-cells = <0>; compatible = "altr,socfpga-gate-clk"; - clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>; + clocks = <&nand_x_clk>; clk-gate = <0xa0 10>; fixed-divider = <4>; }; @@ -754,7 +759,8 @@ reg-names = "nand_data", "denali_reg"; interrupts = <0x0 0x90 0x4>; dma-mask = <0xffffffff>; - clocks = <&nand_x_clk>; + clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; + clock-names = "nand", "nand_x", "ecc"; status = "disabled"; }; @@ -841,6 +847,8 @@ reg = <0xffc08000 0x1000>; clocks = <&l4_sp_clk>; clock-names = "timer"; + resets = <&rst SPTIMER0_RESET>; + reset-names = "timer"; }; timer1: timer1@ffc09000 { @@ -849,6 +857,8 @@ reg = <0xffc09000 0x1000>; clocks = <&l4_sp_clk>; clock-names = "timer"; + resets = <&rst SPTIMER1_RESET>; + reset-names = "timer"; }; timer2: timer2@ffd00000 { @@ -857,6 +867,8 @@ reg = <0xffd00000 0x1000>; clocks = <&osc1>; clock-names = "timer"; + resets = <&rst OSC1TIMER0_RESET>; + reset-names = "timer"; }; timer3: timer3@ffd01000 { @@ -865,6 +877,8 @@ reg = <0xffd01000 0x1000>; clocks = <&osc1>; clock-names = "timer"; + resets = <&rst OSC1TIMER1_RESET>; + reset-names = "timer"; }; uart0: serial0@ffc02000 { diff --git a/dts/src/arm/socfpga_arria10.dtsi b/dts/src/arm/socfpga_arria10.dtsi index a4dcb68f43..59ef13e375 100644 --- a/dts/src/arm/socfpga_arria10.dtsi +++ b/dts/src/arm/socfpga_arria10.dtsi @@ -377,13 +377,28 @@ clk-gate = <0xC8 11>; }; - nand_clk: nand_clk { + nand_x_clk: nand_x_clk { #clock-cells = <0>; compatible = "altr,socfpga-a10-gate-clk"; clocks = <&l4_mp_clk>; clk-gate = <0xC8 10>; }; + nand_ecc_clk: nand_ecc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&nand_x_clk>; + clk-gate = <0xC8 10>; + }; + + nand_clk: nand_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&nand_x_clk>; + fixed-divider = <4>; + clk-gate = <0xC8 10>; + }; + spi_m_clk: spi_m_clk { #clock-cells = <0>; compatible = "altr,socfpga-a10-gate-clk"; @@ -613,7 +628,7 @@ status = "disabled"; }; - sdr: sdr@ffc25000 { + sdr: sdr@ffcfb100 { compatible = "altr,sdr-ctl", "syscon"; reg = <0xffcfb100 0x80>; }; @@ -650,7 +665,8 @@ reg-names = "nand_data", "denali_reg"; interrupts = <0 99 4>; dma-mask = <0xffffffff>; - clocks = <&nand_clk>; + clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>; + clock-names = "nand", "nand_x", "ecc"; status = "disabled"; }; @@ -760,7 +776,7 @@ timer@ffffc600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xffffc600 0x100>; - interrupts = <1 13 0xf04>; + interrupts = <1 13 0xf01>; clocks = <&mpu_periph_clk>; }; @@ -770,6 +786,8 @@ reg = <0xffc02700 0x100>; clocks = <&l4_sp_clk>; clock-names = "timer"; + resets = <&rst SPTIMER0_RESET>; + reset-names = "timer"; }; timer1: timer1@ffc02800 { @@ -778,6 +796,8 @@ reg = <0xffc02800 0x100>; clocks = <&l4_sp_clk>; clock-names = "timer"; + resets = <&rst SPTIMER1_RESET>; + reset-names = "timer"; }; timer2: timer2@ffd00000 { @@ -786,6 +806,8 @@ reg = <0xffd00000 0x100>; clocks = <&l4_sys_free_clk>; clock-names = "timer"; + resets = <&rst L4SYSTIMER0_RESET>; + reset-names = "timer"; }; timer3: timer3@ffd00100 { @@ -794,6 +816,8 @@ reg = <0xffd01000 0x100>; clocks = <&l4_sys_free_clk>; clock-names = "timer"; + resets = <&rst L4SYSTIMER1_RESET>; + reset-names = "timer"; }; uart0: serial0@ffc02000 { diff --git a/dts/src/arm/socfpga_cyclone5_de0_sockit.dts b/dts/src/arm/socfpga_cyclone5_de0_nano_soc.dts index b280e64941..31b01a998b 100644 --- a/dts/src/arm/socfpga_cyclone5_de0_sockit.dts +++ b/dts/src/arm/socfpga_cyclone5_de0_nano_soc.dts @@ -88,7 +88,7 @@ status = "okay"; clock-frequency = <100000>; - adxl345: adxl345@0 { + adxl345: adxl345@53 { compatible = "adi,adxl345"; reg = <0x53>; diff --git a/dts/src/arm/socfpga_cyclone5_socrates.dts b/dts/src/arm/socfpga_cyclone5_socrates.dts index 53bf99eef6..031c721441 100644 --- a/dts/src/arm/socfpga_cyclone5_socrates.dts +++ b/dts/src/arm/socfpga_cyclone5_socrates.dts @@ -21,8 +21,13 @@ model = "EBV SOCrates"; compatible = "ebv,socrates", "altr,socfpga-cyclone5", "altr,socfpga"; + aliases { + ethernet0 = &gmac1; + }; + chosen { - bootargs = "console=ttyS0,115200"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory@0 { diff --git a/dts/src/arm/socfpga_cyclone5_vining_fpga.dts b/dts/src/arm/socfpga_cyclone5_vining_fpga.dts index f50b19447d..e61efe16e7 100644 --- a/dts/src/arm/socfpga_cyclone5_vining_fpga.dts +++ b/dts/src/arm/socfpga_cyclone5_vining_fpga.dts @@ -54,7 +54,8 @@ compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga"; chosen { - bootargs = "console=ttyS0,115200"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory@0 { diff --git a/dts/src/arm/ste-dbx5x0.dtsi b/dts/src/arm/ste-dbx5x0.dtsi index 2310a4e977..e6ed7c0354 100644 --- a/dts/src/arm/ste-dbx5x0.dtsi +++ b/dts/src/arm/ste-dbx5x0.dtsi @@ -15,9 +15,14 @@ #include <dt-bindings/arm/ux500_pm_domains.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/ste-ab8500.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + + chosen { + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -67,9 +72,11 @@ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; clock-names = "apb_pclk", "atclk"; cpu = <&CPU0>; - port { - ptm0_out_port: endpoint { - remote-endpoint = <&funnel_in_port0>; + out-ports { + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; }; }; }; @@ -81,9 +88,11 @@ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; clock-names = "apb_pclk", "atclk"; cpu = <&CPU1>; - port { - ptm1_out_port: endpoint { - remote-endpoint = <&funnel_in_port1>; + out-ports { + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; }; }; }; @@ -94,32 +103,29 @@ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; clock-names = "apb_pclk", "atclk"; - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel output ports */ - port@0 { - reg = <0>; + out-ports { + port { funnel_out_port: endpoint { remote-endpoint = <&replicator_in_port0>; }; }; + }; - /* funnel input ports */ - port@1 { + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { reg = <0>; funnel_in_port0: endpoint { - slave-mode; remote-endpoint = <&ptm0_out_port>; }; }; - port@2 { + port@1 { reg = <1>; funnel_in_port1: endpoint { - slave-mode; remote-endpoint = <&ptm1_out_port>; }; }; @@ -131,11 +137,10 @@ clocks = <&prcmu_clk PRCMU_APEATCLK>; clock-names = "atclk"; - ports { + out-ports { #address-cells = <1>; #size-cells = <0>; - /* replicator output ports */ port@0 { reg = <0>; replicator_out_port0: endpoint { @@ -148,12 +153,11 @@ remote-endpoint = <&etb_in_port>; }; }; + }; - /* replicator input port */ - port@2 { - reg = <0>; + in-ports { + port { replicator_in_port0: endpoint { - slave-mode; remote-endpoint = <&funnel_out_port>; }; }; @@ -166,10 +170,11 @@ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; clock-names = "apb_pclk", "atclk"; - port { - tpiu_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port0>; + in-ports { + port { + tpiu_in_port: endpoint { + remote-endpoint = <&replicator_out_port0>; + }; }; }; }; @@ -180,10 +185,11 @@ clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; clock-names = "apb_pclk", "atclk"; - port { - etb_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port1>; + in-ports { + port { + etb_in_port: endpoint { + remote-endpoint = <&replicator_out_port1>; + }; }; }; }; @@ -197,7 +203,7 @@ <0xa0410100 0x100>; }; - scu@a04100000 { + scu@a0410000 { compatible = "arm,cortex-a9-scu"; reg = <0xa0410000 0x100>; }; @@ -487,7 +493,7 @@ }; prcmu: prcmu@80157000 { - compatible = "stericsson,db8500-prcmu"; + compatible = "stericsson,db8500-prcmu", "syscon"; reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>; reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm"; interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; @@ -878,7 +884,7 @@ power-domains = <&pm_domains DOMAIN_VAPE>; }; - ssp@80002000 { + spi@80002000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80002000 0x1000>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; @@ -892,7 +898,7 @@ power-domains = <&pm_domains DOMAIN_VAPE>; }; - ssp@80003000 { + spi@80003000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80003000 0x1000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm/ste-href-family-pinctrl.dtsi b/dts/src/arm/ste-href-family-pinctrl.dtsi index 5c5cea2327..1ec193b0c5 100644 --- a/dts/src/arm/ste-href-family-pinctrl.dtsi +++ b/dts/src/arm/ste-href-family-pinctrl.dtsi @@ -607,16 +607,20 @@ mcde { lcd_default_mode: lcd_default { - default_mux { + default_mux1 { /* Mux in VSI0 and all the data lines */ function = "lcd"; groups = "lcdvsi0_a_1", /* VSI0 for LCD */ "lcd_d0_d7_a_1", /* Data lines */ "lcd_d8_d11_a_1", /* TV-out */ - "lcdaclk_b_1", /* Clock line for TV-out */ "lcdvsi1_a_1"; /* VSI1 for HDMI */ }; + default_mux2 { + function = "lcda"; + groups = + "lcdaclk_b_1"; /* Clock line for TV-out */ + }; default_cfg1 { pins = "GPIO68_E1", /* VSI0 */ diff --git a/dts/src/arm/ste-href.dtsi b/dts/src/arm/ste-href.dtsi index 9e359e4f34..feb682a3d3 100644 --- a/dts/src/arm/ste-href.dtsi +++ b/dts/src/arm/ste-href.dtsi @@ -15,6 +15,7 @@ / { memory { + device_type = "memory"; reg = <0x00000000 0x20000000>; }; diff --git a/dts/src/arm/ste-hrefprev60.dtsi b/dts/src/arm/ste-hrefprev60.dtsi index 3f14b4df69..94eeb7f1c9 100644 --- a/dts/src/arm/ste-hrefprev60.dtsi +++ b/dts/src/arm/ste-hrefprev60.dtsi @@ -57,7 +57,7 @@ }; }; - ssp@80002000 { + spi@80002000 { /* * On the first generation boards, this SSP/SPI port was connected * to the AB8500. diff --git a/dts/src/arm/ste-snowball.dts b/dts/src/arm/ste-snowball.dts index b0b94d0530..2de3ce79e4 100644 --- a/dts/src/arm/ste-snowball.dts +++ b/dts/src/arm/ste-snowball.dts @@ -26,6 +26,7 @@ }; memory { + device_type = "memory"; reg = <0x00000000 0x20000000>; }; @@ -376,7 +377,7 @@ pinctrl-1 = <&i2c3_sleep_mode>; }; - ssp@80002000 { + spi@80002000 { pinctrl-names = "default"; pinctrl-0 = <&ssp0_snowball_mode>; }; diff --git a/dts/src/arm/ste-u300.dts b/dts/src/arm/ste-u300.dts index 62ecb6a2fa..1bd1aba332 100644 --- a/dts/src/arm/ste-u300.dts +++ b/dts/src/arm/ste-u300.dts @@ -442,7 +442,7 @@ dma-names = "rx"; }; - spi: ssp@c0006000 { + spi: spi@c0006000 { compatible = "arm,pl022", "arm,primecell"; reg = <0xc0006000 0x1000>; interrupt-parent = <&vica>; diff --git a/dts/src/arm/stih410-b2260.dts b/dts/src/arm/stih410-b2260.dts index 155caa8c00..4ee6d51d8d 100644 --- a/dts/src/arm/stih410-b2260.dts +++ b/dts/src/arm/stih410-b2260.dts @@ -61,8 +61,11 @@ compatible = "simple-audio-card"; simple-audio-card,name = "STI-B2260"; status = "okay"; + #address-cells = <1>; + #size-cells = <0>; - simple-audio-card,dai-link0 { + simple-audio-card,dai-link@0 { + reg = <0>; /* DAC */ format = "i2s"; mclk-fs = <128>; diff --git a/dts/src/arm/stihxxx-b2120.dtsi b/dts/src/arm/stihxxx-b2120.dtsi index 4dedfcb0fc..97e05f55fb 100644 --- a/dts/src/arm/stihxxx-b2120.dtsi +++ b/dts/src/arm/stihxxx-b2120.dtsi @@ -27,8 +27,11 @@ compatible = "simple-audio-card"; simple-audio-card,name = "STI-B2120"; status = "okay"; + #address-cells = <1>; + #size-cells = <0>; - simple-audio-card,dai-link0 { + simple-audio-card,dai-link@0 { + reg = <0>; /* HDMI */ format = "i2s"; mclk-fs = <128>; @@ -41,7 +44,8 @@ }; }; - simple-audio-card,dai-link1 { + simple-audio-card,dai-link@1 { + reg = <1>; /* DAC */ format = "i2s"; mclk-fs = <256>; @@ -55,7 +59,8 @@ }; }; - simple-audio-card,dai-link2 { + simple-audio-card,dai-link@2 { + reg = <2>; /* SPDIF */ format = "left_j"; mclk-fs = <128>; diff --git a/dts/src/arm/stm32429i-eval.dts b/dts/src/arm/stm32429i-eval.dts index 7eb786a2d6..ed7d7f4646 100644 --- a/dts/src/arm/stm32429i-eval.dts +++ b/dts/src/arm/stm32429i-eval.dts @@ -264,8 +264,7 @@ &sdio { status = "okay"; vmmc-supply = <&mmc_vcard>; - cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "opendrain"; pinctrl-0 = <&sdio_pins>; pinctrl-1 = <&sdio_pins_od>; diff --git a/dts/src/arm/stm32f429.dtsi b/dts/src/arm/stm32f429.dtsi index e35d782e7e..8d6f028ae2 100644 --- a/dts/src/arm/stm32f429.dtsi +++ b/dts/src/arm/stm32f429.dtsi @@ -58,7 +58,7 @@ clock-frequency = <0>; }; - clk-lse { + clk_lse: clk-lse { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; diff --git a/dts/src/arm/stm32f469-disco.dts b/dts/src/arm/stm32f469-disco.dts index 3ee768cb86..7937b43d77 100644 --- a/dts/src/arm/stm32f469-disco.dts +++ b/dts/src/arm/stm32f469-disco.dts @@ -210,8 +210,7 @@ &sdio { status = "okay"; vmmc-supply = <&mmc_vcard>; - cd-gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpiog 2 GPIO_ACTIVE_LOW>; broken-cd; pinctrl-names = "default", "opendrain"; pinctrl-0 = <&sdio_pins>; diff --git a/dts/src/arm/stm32f746-disco.dts b/dts/src/arm/stm32f746-disco.dts index f9ad71f7c8..e3a7bd338d 100644 --- a/dts/src/arm/stm32f746-disco.dts +++ b/dts/src/arm/stm32f746-disco.dts @@ -101,8 +101,7 @@ &sdio1 { status = "okay"; vmmc-supply = <&mmc_vcard>; - cd-gpios = <&gpioc 13 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "opendrain"; pinctrl-0 = <&sdio_pins_a>; pinctrl-1 = <&sdio_pins_od_a>; diff --git a/dts/src/arm/stm32f769-disco.dts b/dts/src/arm/stm32f769-disco.dts index 677276ba4d..483d896e2b 100644 --- a/dts/src/arm/stm32f769-disco.dts +++ b/dts/src/arm/stm32f769-disco.dts @@ -126,8 +126,7 @@ &sdio2 { status = "okay"; vmmc-supply = <&mmc_vcard>; - cd-gpios = <&gpioi 15 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpioi 15 GPIO_ACTIVE_LOW>; broken-cd; pinctrl-names = "default", "opendrain"; pinctrl-0 = <&sdio_pins_b>; diff --git a/dts/src/arm/stm32h743.dtsi b/dts/src/arm/stm32h743.dtsi index 637beffe50..cbdd69ca9e 100644 --- a/dts/src/arm/stm32h743.dtsi +++ b/dts/src/arm/stm32h743.dtsi @@ -472,7 +472,7 @@ interrupt-parent = <&exti>; interrupts = <17 IRQ_TYPE_EDGE_RISING>; interrupt-names = "alarm"; - st,syscfg = <&pwrcfg>; + st,syscfg = <&pwrcfg 0x00 0x100>; status = "disabled"; }; diff --git a/dts/src/arm/stm32mp157c-ev1.dts b/dts/src/arm/stm32mp157c-ev1.dts index 372bc2ea6b..063ee8ac5d 100644 --- a/dts/src/arm/stm32mp157c-ev1.dts +++ b/dts/src/arm/stm32mp157c-ev1.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "stm32mp157c-ed1.dts" +#include <dt-bindings/gpio/gpio.h> / { model = "STMicroelectronics STM32MP157C eval daughter on eval mother"; @@ -19,6 +20,58 @@ serial0 = &uart4; ethernet0 = ðernet0; }; + + panel_backlight: panel-backlight { + compatible = "gpio-backlight"; + gpios = <&gpiod 13 GPIO_ACTIVE_LOW>; + default-on; + status = "okay"; + }; +}; + +&cec { + pinctrl-names = "default"; + pinctrl-0 = <&cec_pins_a>; + status = "okay"; +}; + +&dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + + port@1 { + reg = <1>; + dsi_out: endpoint { + remote-endpoint = <&dsi_panel_in>; + }; + }; + }; + + panel-dsi@0 { + compatible = "raydium,rm68200"; + reg = <0>; + reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>; + backlight = <&panel_backlight>; + status = "okay"; + + port { + dsi_panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; }; ðernet0 { @@ -40,12 +93,6 @@ }; }; -&cec { - pinctrl-names = "default"; - pinctrl-0 = <&cec_pins_a>; - status = "okay"; -}; - &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; @@ -62,6 +109,20 @@ status = "okay"; }; +<dc { + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&dsi_in>; + }; + }; +}; + &m_can1 { pinctrl-names = "default"; pinctrl-0 = <&m_can1_pins_a>; diff --git a/dts/src/arm/stm32mp157c.dtsi b/dts/src/arm/stm32mp157c.dtsi index 185541a5b6..8bf1c17f8c 100644 --- a/dts/src/arm/stm32mp157c.dtsi +++ b/dts/src/arm/stm32mp157c.dtsi @@ -923,7 +923,7 @@ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&rcc HASH1>; resets = <&rcc HASH1_R>; - dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0 0x0>; + dmas = <&mdma1 31 0x10 0x1000A02 0x0 0x0>; dma-names = "in"; dma-maxburst = <2>; status = "disabled"; @@ -947,7 +947,7 @@ dma-requests = <48>; }; - qspi: qspi@58003000 { + qspi: spi@58003000 { compatible = "st,stm32f469-qspi"; reg = <0x58003000 0x1000>, <0x70000000 0x10000000>; reg-names = "qspi", "qspi_mm"; diff --git a/dts/src/arm/sun5i-reference-design-tablet.dtsi b/dts/src/arm/sun5i-reference-design-tablet.dtsi index 8acbaab14f..d2a2eb8b3f 100644 --- a/dts/src/arm/sun5i-reference-design-tablet.dtsi +++ b/dts/src/arm/sun5i-reference-design-tablet.dtsi @@ -92,7 +92,8 @@ */ clock-frequency = <400000>; - touchscreen: touchscreen { + touchscreen: touchscreen@40 { + reg = <0x40>; interrupt-parent = <&pio>; interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */ pinctrl-names = "default"; diff --git a/dts/src/arm/sun5i.dtsi b/dts/src/arm/sun5i.dtsi index 8bfb366511..9cd65c4672 100644 --- a/dts/src/arm/sun5i.dtsi +++ b/dts/src/arm/sun5i.dtsi @@ -108,6 +108,21 @@ }; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ + cma_pool: cma@4a000000 { + compatible = "shared-dma-pool"; + size = <0x6000000>; + alloc-ranges = <0x4a000000 0x6000000>; + reusable; + linux,cma-default; + }; + }; + soc@1c00000 { compatible = "simple-bus"; #address-cells = <1>; @@ -294,6 +309,17 @@ }; }; + video-codec@1c0e000 { + compatible = "allwinner,sun5i-a13-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_VE>; + interrupts = <53>; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; diff --git a/dts/src/arm/sun7i-a20.dtsi b/dts/src/arm/sun7i-a20.dtsi index 9c52712af2..02e40da9f0 100644 --- a/dts/src/arm/sun7i-a20.dtsi +++ b/dts/src/arm/sun7i-a20.dtsi @@ -174,6 +174,21 @@ reg = <0x40000000 0x80000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ + cma_pool: cma@4a000000 { + compatible = "shared-dma-pool"; + size = <0x6000000>; + alloc-ranges = <0x4a000000 0x6000000>; + reusable; + linux,cma-default; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -479,6 +494,17 @@ }; }; + video-codec@1c0e000 { + compatible = "allwinner,sun7i-a20-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_AHB_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_VE>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + allwinner,sram = <&ve_sram 1>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; diff --git a/dts/src/arm/sun8i-a33.dtsi b/dts/src/arm/sun8i-a33.dtsi index 4e92741b24..c1cc8f09dd 100644 --- a/dts/src/arm/sun8i-a33.dtsi +++ b/dts/src/arm/sun8i-a33.dtsi @@ -190,6 +190,21 @@ reg = <0x40000000 0x80000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ + cma_pool: cma@4a000000 { + compatible = "shared-dma-pool"; + size = <0x6000000>; + alloc-ranges = <0x4a000000 0x6000000>; + reusable; + linux,cma-default; + }; + }; + sound: sound { compatible = "simple-audio-card"; simple-audio-card,name = "sun8i-a33-audio"; @@ -254,6 +269,17 @@ }; }; + video-codec@01c0e000 { + compatible = "allwinner,sun8i-a33-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + allwinner,sram = <&ve_sram 1>; + }; + crypto: crypto-engine@1c15000 { compatible = "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; diff --git a/dts/src/arm/sun8i-a83t-bananapi-m3.dts b/dts/src/arm/sun8i-a83t-bananapi-m3.dts index c7ce4158d6..742d2946b0 100644 --- a/dts/src/arm/sun8i-a83t-bananapi-m3.dts +++ b/dts/src/arm/sun8i-a83t-bananapi-m3.dts @@ -191,6 +191,11 @@ status = "okay"; }; +&r_cir { + clock-frequency = <3000000>; + status = "okay"; +}; + &r_rsb { status = "okay"; diff --git a/dts/src/arm/sun8i-a83t.dtsi b/dts/src/arm/sun8i-a83t.dtsi index 00a02b0373..5617dd387f 100644 --- a/dts/src/arm/sun8i-a83t.dtsi +++ b/dts/src/arm/sun8i-a83t.dtsi @@ -990,6 +990,19 @@ reg = <0x1f01c00 0x400>; }; + r_cir: ir@1f02000 { + compatible = "allwinner,sun8i-a83t-ir", + "allwinner,sun5i-a13-ir"; + clocks = <&r_ccu CLK_APB0_IR>, <&r_ccu CLK_IR>; + clock-names = "apb", "ir"; + resets = <&r_ccu RST_APB0_IR>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x01f02000 0x400>; + pinctrl-names = "default"; + pinctrl-0 = <&r_cir_pin>; + status = "disabled"; + }; + r_pio: pinctrl@1f02c00 { compatible = "allwinner,sun8i-a83t-r-pinctrl"; reg = <0x01f02c00 0x400>; @@ -1002,6 +1015,11 @@ interrupt-controller; #interrupt-cells = <3>; + r_cir_pin: r-cir-pin { + pins = "PL12"; + function = "s_cir_rx"; + }; + r_rsb_pins: r-rsb-pins { pins = "PL0", "PL1"; function = "s_rsb"; diff --git a/dts/src/arm/sun8i-h3-bananapi-m2-plus-v1.2.dts b/dts/src/arm/sun8i-h3-bananapi-m2-plus-v1.2.dts new file mode 100644 index 0000000000..fc4a8c3d08 --- /dev/null +++ b/dts/src/arm/sun8i-h3-bananapi-m2-plus-v1.2.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org> + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-bananapi-m2-plus-v1.2.dtsi" + +/ { + model = "Banana Pi BPI-M2-Plus v1.2 H3"; + compatible = "bananapi,bpi-m2-plus-v1.2", "allwinner,sun8i-h3"; +}; diff --git a/dts/src/arm/sun8i-h3-bananapi-m2-plus.dts b/dts/src/arm/sun8i-h3-bananapi-m2-plus.dts index 30540dc8e0..195a75da13 100644 --- a/dts/src/arm/sun8i-h3-bananapi-m2-plus.dts +++ b/dts/src/arm/sun8i-h3-bananapi-m2-plus.dts @@ -42,195 +42,9 @@ /dts-v1/; #include "sun8i-h3.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "sunxi-bananapi-m2-plus.dtsi" / { - model = "Banana Pi BPI-M2-Plus"; + model = "Banana Pi BPI-M2-Plus H3"; compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; - - aliases { - ethernet0 = &emac; - serial0 = &uart0; - serial1 = &uart1; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - connector { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&hdmi_out_con>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - - pwr_led { - label = "bananapi-m2-plus:red:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ - default-state = "on"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - - sw4 { - label = "power"; - linux,code = <BTN_0>; - gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; - }; - }; - - reg_gmac_3v3: gmac-3v3 { - compatible = "regulator-fixed"; - regulator-name = "gmac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - enable-active-high; - gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; - }; - - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ - }; -}; - -&de { - status = "okay"; -}; - -&ehci0 { - status = "okay"; -}; - -&ehci1 { - status = "okay"; -}; - -&ehci2 { - status = "okay"; -}; - -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&emac_rgmii_pins>; - phy-supply = <®_gmac_3v3>; - phy-handle = <&ext_rgmii_phy>; - phy-mode = "rgmii"; - - status = "okay"; -}; - -&external_mdio { - ext_rgmii_phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; -}; - -&hdmi { - status = "okay"; -}; - -&hdmi_out { - hdmi_out_con: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; -}; - -&ir { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; - status = "okay"; -}; - -&mmc0 { - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - status = "okay"; -}; - -&mmc1 { - vmmc-supply = <®_vcc3v3>; - vqmmc-supply = <®_vcc3v3>; - mmc-pwrseq = <&wifi_pwrseq>; - bus-width = <4>; - non-removable; - status = "okay"; - - brcmf: wifi@1 { - reg = <1>; - compatible = "brcm,bcm4329-fmac"; - interrupt-parent = <&pio>; - interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ - interrupt-names = "host-wake"; - }; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v3>; - vqmmc-supply = <®_vcc3v3>; - bus-width = <8>; - non-removable; - status = "okay"; -}; - -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -&ohci2 { - status = "okay"; -}; - -®_usb0_vbus { - gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */ - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usbphy { - usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ - usb0_vbus-supply = <®_usb0_vbus>; - /* USB host VBUS is on as long as VCC-IO is on */ - status = "okay"; }; diff --git a/dts/src/arm/sun8i-h3-orangepi-zero-plus2.dts b/dts/src/arm/sun8i-h3-orangepi-zero-plus2.dts new file mode 100644 index 0000000000..c834048c32 --- /dev/null +++ b/dts/src/arm/sun8i-h3-orangepi-zero-plus2.dts @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2017 Jagan Teki <jteki@openedev.com> + * Copyright (C) 2018 Diego Rondini <diego.rondini@kynetics.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun8i-h3.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "OrangePi Zero Plus2 H3"; + compatible = "xunlong,orangepi-zero-plus2-h3", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ + post-power-on-delay-ms = <200>; + }; +}; + +&de { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/dts/src/arm/sun8i-h3.dtsi b/dts/src/arm/sun8i-h3.dtsi index f0096074a4..3ecfabb101 100644 --- a/dts/src/arm/sun8i-h3.dtsi +++ b/dts/src/arm/sun8i-h3.dtsi @@ -119,6 +119,20 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + cma_pool: cma@4a000000 { + compatible = "shared-dma-pool"; + size = <0x6000000>; + alloc-ranges = <0x4a000000 0x6000000>; + reusable; + linux,cma-default; + }; + }; + soc { system-control@1c00000 { compatible = "allwinner,sun8i-h3-system-control"; @@ -142,6 +156,17 @@ }; }; + video-codec@01c0e000 { + compatible = "allwinner,sun8i-h3-video-engine"; + reg = <0x01c0e000 0x1000>; + clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>, + <&ccu CLK_DRAM_VE>; + clock-names = "ahb", "mod", "ram"; + resets = <&ccu RST_BUS_VE>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + allwinner,sram = <&ve_sram 1>; + }; + mali: gpu@1c40000 { compatible = "allwinner,sun8i-h3-mali", "arm,mali-400"; reg = <0x01c40000 0x10000>; diff --git a/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts b/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts index c39b9169ea..438b7b44da 100644 --- a/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts +++ b/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts @@ -105,6 +105,12 @@ }; }; +&ahci { + ahci-supply = <®_dldo4>; + phy-supply = <®_eldo3>; + status = "okay"; +}; + &de { status = "okay"; }; @@ -159,8 +165,7 @@ &mmc0 { vmmc-supply = <®_dcdc1>; bus-width = <4>; - cd-gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ - cd-inverted; + cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */ status = "okay"; }; @@ -251,6 +256,18 @@ regulator-name = "vcc-wifi"; }; +®_dldo4 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vdd2v5-sata"; +}; + +®_eldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd1v2-sata"; +}; + &tcon_tv0 { status = "okay"; }; diff --git a/dts/src/arm/sun8i-r40.dtsi b/dts/src/arm/sun8i-r40.dtsi index 5f547c161b..6f4c9ca5a3 100644 --- a/dts/src/arm/sun8i-r40.dtsi +++ b/dts/src/arm/sun8i-r40.dtsi @@ -529,6 +529,19 @@ #size-cells = <0>; }; + ahci: sata@1c18000 { + compatible = "allwinner,sun8i-r40-ahci"; + reg = <0x01c18000 0x1000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SATA>, <&ccu CLK_SATA>; + resets = <&ccu RST_BUS_SATA>; + resets-name = "ahci"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + }; + gmac: ethernet@1c50000 { compatible = "allwinner,sun8i-r40-gmac"; syscon = <&ccu>; diff --git a/dts/src/arm/sun8i-reference-design-tablet.dtsi b/dts/src/arm/sun8i-reference-design-tablet.dtsi index 880096c7e2..5e8a95af89 100644 --- a/dts/src/arm/sun8i-reference-design-tablet.dtsi +++ b/dts/src/arm/sun8i-reference-design-tablet.dtsi @@ -69,7 +69,8 @@ */ clock-frequency = <400000>; - touchscreen: touchscreen@0 { + touchscreen: touchscreen@40 { + reg = <0x40>; interrupt-parent = <&pio>; interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */ pinctrl-names = "default"; diff --git a/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts b/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts index 35859d8f32..bf97f6244c 100644 --- a/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts +++ b/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts @@ -95,7 +95,7 @@ &i2c0 { status = "okay"; - axp22x: pmic@68 { + axp22x: pmic@34 { compatible = "x-powers,axp221"; reg = <0x34>; interrupt-parent = <&nmi_intc>; diff --git a/dts/src/arm/sun9i-a80.dtsi b/dts/src/arm/sun9i-a80.dtsi index 25591d6883..d9532fb1ef 100644 --- a/dts/src/arm/sun9i-a80.dtsi +++ b/dts/src/arm/sun9i-a80.dtsi @@ -1196,7 +1196,7 @@ }; }; - r_rsb: i2c@8003400 { + r_rsb: rsb@8003400 { compatible = "allwinner,sun8i-a23-rsb"; reg = <0x08003400 0x400>; interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm/sunxi-bananapi-m2-plus-v1.2.dtsi b/dts/src/arm/sunxi-bananapi-m2-plus-v1.2.dtsi new file mode 100644 index 0000000000..53edd1faee --- /dev/null +++ b/dts/src/arm/sunxi-bananapi-m2-plus-v1.2.dtsi @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Chen-Yu Tsai <wens@csie.org> + */ + +#include "sunxi-bananapi-m2-plus.dtsi" + +/ { + /* + * Bananapi M2+ v1.2 uses a GPIO line to change the effective + * resistance on the CPU regulator's feedback pin. + */ + reg_vdd_cpux: vdd-cpux { + compatible = "regulator-gpio"; + regulator-name = "vdd-cpux"; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-ramp-delay = <50>; /* 4ms */ + gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ + gpios-states = <0x1>; + states = <1100000 0x0 + 1300000 0x1>; + }; +}; + +&cpu0 { + cpu-supply = <®_vdd_cpux>; +}; diff --git a/dts/src/arm/sunxi-bananapi-m2-plus.dtsi b/dts/src/arm/sunxi-bananapi-m2-plus.dtsi new file mode 100644 index 0000000000..b3283aeb5b --- /dev/null +++ b/dts/src/arm/sunxi-bananapi-m2-plus.dtsi @@ -0,0 +1,231 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + aliases { + ethernet0 = &emac; + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + + pwr_led { + label = "bananapi-m2-plus:red:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + + sw4 { + label = "power"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + status = "okay"; +}; + +&external_mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&mmc1 { + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +®_usb0_vbus { + gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + usb0_vbus-supply = <®_usb0_vbus>; + /* USB host VBUS is on as long as VCC-IO is on */ + status = "okay"; +}; diff --git a/dts/src/arm/sunxi-h3-h5.dtsi b/dts/src/arm/sunxi-h3-h5.dtsi index fc6131315c..4b1530ebe4 100644 --- a/dts/src/arm/sunxi-h3-h5.dtsi +++ b/dts/src/arm/sunxi-h3-h5.dtsi @@ -816,7 +816,7 @@ clock-names = "apb", "ir"; resets = <&r_ccu RST_APB0_IR>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x01f02000 0x40>; + reg = <0x01f02000 0x400>; status = "disabled"; }; diff --git a/dts/src/arm/tegra124-apalis-eval.dts b/dts/src/arm/tegra124-apalis-eval.dts index a6ad759ddd..eaee10ef65 100644 --- a/dts/src/arm/tegra124-apalis-eval.dts +++ b/dts/src/arm/tegra124-apalis-eval.dts @@ -72,6 +72,7 @@ host1x@50000000 { hdmi@54280000 { status = "okay"; + hdmi-supply = <®_5v0>; }; }; @@ -122,7 +123,7 @@ /* * GEN2_I2C: I2C2_SDA/SCL (DDC) on MXM3 pin 205/207 (e.g. display EDID) */ - hdmi_ddc: i2c@7000c400 { + i2c@7000c400 { status = "okay"; }; @@ -141,29 +142,19 @@ spi@7000d400 { status = "okay"; spi-max-frequency = <50000000>; - - spidev0: spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <50000000>; - }; }; /* SPI4: Apalis SPI2 */ spi@7000da00 { status = "okay"; spi-max-frequency = <50000000>; - - spidev1: spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <50000000>; - }; }; /* Apalis Serial ATA */ sata@70020000 { status = "okay"; + target-5v-supply = <®_5v0>; + target-12v-supply = <®_12v0>; }; hda@70030000 { @@ -177,18 +168,18 @@ /* Apalis MMC1 */ sdhci@700b0000 { status = "okay"; + bus-width = <4>; /* MMC1_CD# */ cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; - bus-width = <4>; vqmmc-supply = <&vddio_sdmmc1>; }; /* Apalis SD1 */ sdhci@700b0400 { status = "okay"; + bus-width = <4>; /* SD1_CD# */ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; - bus-width = <4>; vqmmc-supply = <&vddio_sdmmc3>; }; @@ -225,11 +216,12 @@ backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm 3 5000000>; /* BKL1_PWM */ brightness-levels = <255 231 223 207 191 159 127 0>; default-brightness-level = <6>; /* BKL1_ON */ enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + pwms = <&pwm 3 5000000>; /* BKL1_PWM */ }; gpio-keys { @@ -244,6 +236,13 @@ }; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_5v0: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "5V_SW"; @@ -251,6 +250,13 @@ regulator-max-microvolt = <5000000>; }; + reg_12v0: regulator-12v0 { + compatible = "regulator-fixed"; + regulator-name = "12V_SW"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + /* USBO1_EN */ reg_usbo1_vbus: regulator-usbo1-vbus { compatible = "regulator-fixed"; @@ -276,7 +282,7 @@ &gpio { /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */ - pex_perst_n { + pex-perst-n { gpio-hog; gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; output-high; diff --git a/dts/src/arm/tegra124-apalis-v1.2-eval.dts b/dts/src/arm/tegra124-apalis-v1.2-eval.dts index 8a8d5fa0ec..7961eb4bd8 100644 --- a/dts/src/arm/tegra124-apalis-v1.2-eval.dts +++ b/dts/src/arm/tegra124-apalis-v1.2-eval.dts @@ -11,7 +11,8 @@ / { model = "Toradex Apalis TK1 on Apalis Evaluation Board"; compatible = "toradex,apalis-tk1-v1.2-eval", "toradex,apalis-tk1-eval", - "toradex,apalis-tk1", "nvidia,tegra124"; + "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1", + "nvidia,tegra124"; aliases { rtc0 = "/i2c@7000c000/rtc@68"; @@ -36,6 +37,7 @@ host1x@50000000 { hdmi@54280000 { status = "okay"; + hdmi-supply = <®_5v0>; }; }; @@ -98,7 +100,7 @@ * I2C4 (DDC): I2C4_SDA/SCL (DDC) on MXM3 pin 205/207 * (e.g. display EDID) */ - hdmi_ddc: i2c@7000c700 { + i2c@7000c700 { status = "okay"; }; @@ -106,29 +108,19 @@ spi@7000d400 { status = "okay"; spi-max-frequency = <50000000>; - - spidev0: spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <50000000>; - }; }; /* SPI4: Apalis SPI2 */ spi@7000da00 { status = "okay"; spi-max-frequency = <50000000>; - - spidev1: spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <50000000>; - }; }; /* Apalis Serial ATA */ sata@70020000 { status = "okay"; + target-5v-supply = <®_5v0>; + target-12v-supply = <®_12v0>; }; hda@70030000 { @@ -142,18 +134,18 @@ /* Apalis MMC1 */ sdhci@700b0000 { status = "okay"; + bus-width = <4>; /* MMC1_CD# */ cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; - bus-width = <4>; vqmmc-supply = <&vddio_sdmmc1>; }; /* Apalis SD1 */ sdhci@700b0400 { status = "okay"; + bus-width = <4>; /* SD1_CD# */ cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; - bus-width = <4>; vqmmc-supply = <&vddio_sdmmc3>; }; @@ -190,11 +182,12 @@ backlight: backlight { compatible = "pwm-backlight"; - pwms = <&pwm 3 5000000>; /* BKL1_PWM */ brightness-levels = <255 231 223 207 191 159 127 0>; default-brightness-level = <6>; /* BKL1_ON */ enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + pwms = <&pwm 3 5000000>; /* BKL1_PWM */ }; gpio-keys { @@ -209,6 +202,13 @@ }; }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + reg_5v0: regulator-5v0 { compatible = "regulator-fixed"; regulator-name = "5V_SW"; @@ -216,6 +216,13 @@ regulator-max-microvolt = <5000000>; }; + reg_12v0: regulator-12v0 { + compatible = "regulator-fixed"; + regulator-name = "12V_SW"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + /* USBO1_EN */ reg_usbo1_vbus: regulator-usbo1-vbus { compatible = "regulator-fixed"; @@ -241,7 +248,7 @@ &gpio { /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */ - pex_perst_n { + pex-perst-n { gpio-hog; gpios = <TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; output-high; diff --git a/dts/src/arm/tegra124-apalis-v1.2.dtsi b/dts/src/arm/tegra124-apalis-v1.2.dtsi index 573aaa50ff..367eb8c860 100644 --- a/dts/src/arm/tegra124-apalis-v1.2.dtsi +++ b/dts/src/arm/tegra124-apalis-v1.2.dtsi @@ -11,23 +11,19 @@ * Compatible for Revisions 2GB: V1.2A */ / { - model = "Toradex Apalis TK1"; - compatible = "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1", - "nvidia,tegra124"; - memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; pcie@1003000 { status = "okay"; - avddio-pex-supply = <&vdd_1v05>; - avdd-pex-pll-supply = <&vdd_1v05>; - avdd-pll-erefe-supply = <&avdd_1v05>; - dvddio-pex-supply = <&vdd_1v05>; - hvdd-pex-pll-e-supply = <®_3v3>; - hvdd-pex-supply = <®_3v3>; - vddio-pex-ctl-supply = <®_3v3>; + avddio-pex-supply = <®_1v05_vdd>; + avdd-pex-pll-supply = <®_1v05_vdd>; + avdd-pll-erefe-supply = <®_1v05_avdd>; + dvddio-pex-supply = <®_1v05_vdd>; + hvdd-pex-pll-e-supply = <®_module_3v3>; + hvdd-pex-supply = <®_module_3v3>; + vddio-pex-ctl-supply = <®_module_3v3>; /* Apalis PCIe (additional lane Apalis type specific) */ pci@1,0 { @@ -42,16 +38,21 @@ phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>; phy-names = "pcie-0"; status = "okay"; + + pcie@0 { + reg = <0 0 0 0 0>; + local-mac-address = [00 00 00 00 00 00]; + }; }; }; host1x@50000000 { hdmi@54280000 { - pll-supply = <®_1v05_avdd_hdmi_pll>; - vdd-supply = <®_3v3_avdd_hdmi>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + pll-supply = <®_1v05_avdd_hdmi_pll>; + vdd-supply = <®_3v3_avdd_hdmi>; }; }; @@ -60,44 +61,44 @@ * Node left disabled on purpose - the bootloader will enable * it after having set the VPR up */ - vdd-supply = <&vdd_gpu>; + vdd-supply = <®_vdd_gpu>; }; - pinmux: pinmux@70000868 { + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; state_default: pinmux { /* Analogue Audio (On-module) */ - dap3_fs_pp0 { + dap3-fs-pp0 { nvidia,pins = "dap3_fs_pp0"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap3_din_pp1 { + dap3-din-pp1 { nvidia,pins = "dap3_din_pp1"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap3_dout_pp2 { + dap3-dout-pp2 { nvidia,pins = "dap3_dout_pp2"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap3_sclk_pp3 { + dap3-sclk-pp3 { nvidia,pins = "dap3_sclk_pp3"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap_mclk1_pw4 { + dap-mclk1-pw4 { nvidia,pins = "dap_mclk1_pw4"; nvidia,function = "extperiph1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -124,7 +125,7 @@ }; /* Apalis CAM1_MCLK */ - cam_mclk_pcc0 { + cam-mclk-pcc0 { nvidia,pins = "cam_mclk_pcc0"; nvidia,function = "vi_alt3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -133,28 +134,28 @@ }; /* Apalis Digital Audio */ - dap2_fs_pa2 { + dap2-fs-pa2 { nvidia,pins = "dap2_fs_pa2"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap2_sclk_pa3 { + dap2-sclk-pa3 { nvidia,pins = "dap2_sclk_pa3"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap2_din_pa4 { + dap2-din-pa4 { nvidia,pins = "dap2_din_pa4"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap2_dout_pa5 { + dap2-dout-pa5 { nvidia,pins = "dap2_dout_pa5"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -167,7 +168,7 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - clk3_out_pee0 { + clk3-out-pee0 { nvidia,pins = "clk3_out_pee0"; nvidia,function = "extperiph3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -176,7 +177,7 @@ }; /* Apalis GPIO */ - usb_vbus_en0_pn4 { + usb-vbus-en0-pn4 { nvidia,pins = "usb_vbus_en0_pn4"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -184,7 +185,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; - usb_vbus_en1_pn5 { + usb-vbus-en1-pn5 { nvidia,pins = "usb_vbus_en1_pn5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -192,35 +193,35 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; - pex_l0_rst_n_pdd1 { + pex-l0-rst-n-pdd1 { nvidia,pins = "pex_l0_rst_n_pdd1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - pex_l0_clkreq_n_pdd2 { + pex-l0-clkreq-n-pdd2 { nvidia,pins = "pex_l0_clkreq_n_pdd2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - pex_l1_rst_n_pdd5 { + pex-l1-rst-n-pdd5 { nvidia,pins = "pex_l1_rst_n_pdd5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - pex_l1_clkreq_n_pdd6 { + pex-l1-clkreq-n-pdd6 { nvidia,pins = "pex_l1_clkreq_n_pdd6"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dp_hpd_pff0 { + dp-hpd-pff0 { nvidia,pins = "dp_hpd_pff0"; nvidia,function = "dp"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -244,7 +245,7 @@ }; /* Apalis HDMI1_CEC */ - hdmi_cec_pee3 { + hdmi-cec-pee3 { nvidia,pins = "hdmi_cec_pee3"; nvidia,function = "cec"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -254,7 +255,7 @@ }; /* Apalis HDMI1_HPD */ - hdmi_int_pn7 { + hdmi-int-pn7 { nvidia,pins = "hdmi_int_pn7"; nvidia,function = "rsvd1"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -264,7 +265,7 @@ }; /* Apalis I2C1 */ - gen1_i2c_scl_pc4 { + gen1-i2c-scl-pc4 { nvidia,pins = "gen1_i2c_scl_pc4"; nvidia,function = "i2c1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -272,7 +273,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - gen1_i2c_sda_pc5 { + gen1-i2c-sda-pc5 { nvidia,pins = "gen1_i2c_sda_pc5"; nvidia,function = "i2c1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -282,7 +283,7 @@ }; /* Apalis I2C3 (CAM) */ - cam_i2c_scl_pbb1 { + cam-i2c-scl-pbb1 { nvidia,pins = "cam_i2c_scl_pbb1"; nvidia,function = "i2c3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -290,7 +291,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - cam_i2c_sda_pbb2 { + cam-i2c-sda-pbb2 { nvidia,pins = "cam_i2c_sda_pbb2"; nvidia,function = "i2c3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -300,7 +301,7 @@ }; /* Apalis I2C4 (DDC) */ - ddc_scl_pv4 { + ddc-scl-pv4 { nvidia,pins = "ddc_scl_pv4"; nvidia,function = "i2c4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -308,7 +309,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; }; - ddc_sda_pv5 { + ddc-sda-pv5 { nvidia,pins = "ddc_sda_pv5"; nvidia,function = "i2c4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -318,77 +319,77 @@ }; /* Apalis MMC1 */ - sdmmc1_cd_n_pv3 { /* CD# GPIO */ + sdmmc1-cd-n-pv3 { /* CD# GPIO */ nvidia,pins = "sdmmc1_wp_n_pv3"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - clk2_out_pw5 { /* D5 GPIO */ + clk2-out-pw5 { /* D5 GPIO */ nvidia,pins = "clk2_out_pw5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_dat3_py4 { + sdmmc1-dat3-py4 { nvidia,pins = "sdmmc1_dat3_py4"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_dat2_py5 { + sdmmc1-dat2-py5 { nvidia,pins = "sdmmc1_dat2_py5"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_dat1_py6 { + sdmmc1-dat1-py6 { nvidia,pins = "sdmmc1_dat1_py6"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_dat0_py7 { + sdmmc1-dat0-py7 { nvidia,pins = "sdmmc1_dat0_py7"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_clk_pz0 { + sdmmc1-clk-pz0 { nvidia,pins = "sdmmc1_clk_pz0"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_cmd_pz1 { + sdmmc1-cmd-pz1 { nvidia,pins = "sdmmc1_cmd_pz1"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - clk2_req_pcc5 { /* D4 GPIO */ + clk2-req-pcc5 { /* D4 GPIO */ nvidia,pins = "clk2_req_pcc5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */ + sdmmc3-clk-lb-in-pee5 { /* D6 GPIO */ nvidia,pins = "sdmmc3_clk_lb_in_pee5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - usb_vbus_en2_pff1 { /* D7 GPIO */ + usb-vbus-en2-pff1 { /* D7 GPIO */ nvidia,pins = "usb_vbus_en2_pff1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -428,7 +429,7 @@ }; /* Apalis SATA1_ACT# */ - dap1_dout_pn2 { + dap1-dout-pn2 { nvidia,pins = "dap1_dout_pn2"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -437,49 +438,49 @@ }; /* Apalis SD1 */ - sdmmc3_clk_pa6 { + sdmmc3-clk-pa6 { nvidia,pins = "sdmmc3_clk_pa6"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_cmd_pa7 { + sdmmc3-cmd-pa7 { nvidia,pins = "sdmmc3_cmd_pa7"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_dat3_pb4 { + sdmmc3-dat3-pb4 { nvidia,pins = "sdmmc3_dat3_pb4"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_dat2_pb5 { + sdmmc3-dat2-pb5 { nvidia,pins = "sdmmc3_dat2_pb5"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_dat1_pb6 { + sdmmc3-dat1-pb6 { nvidia,pins = "sdmmc3_dat1_pb6"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_dat0_pb7 { + sdmmc3-dat0-pb7 { nvidia,pins = "sdmmc3_dat0_pb7"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_cd_n_pv2 { /* CD# GPIO */ + sdmmc3-cd-n-pv2 { /* CD# GPIO */ nvidia,pins = "sdmmc3_cd_n_pv2"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -488,14 +489,14 @@ }; /* Apalis SPDIF */ - spdif_out_pk5 { + spdif-out-pk5 { nvidia,pins = "spdif_out_pk5"; nvidia,function = "spdif"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - spdif_in_pk6 { + spdif-in-pk6 { nvidia,pins = "spdif_in_pk6"; nvidia,function = "spdif"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -504,28 +505,28 @@ }; /* Apalis SPI1 */ - ulpi_clk_py0 { + ulpi-clk-py0 { nvidia,pins = "ulpi_clk_py0"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_dir_py1 { + ulpi-dir-py1 { nvidia,pins = "ulpi_dir_py1"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - ulpi_nxt_py2 { + ulpi-nxt-py2 { nvidia,pins = "ulpi_nxt_py2"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_stp_py3 { + ulpi-stp-py3 { nvidia,pins = "ulpi_stp_py3"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -578,42 +579,42 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart1_txd_pu0 { + uart1-txd-pu0 { nvidia,pins = "pu0"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - uart1_rxd_pu1 { + uart1-rxd-pu1 { nvidia,pins = "pu1"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart1_cts_n_pu2 { + uart1-cts-n-pu2 { nvidia,pins = "pu2"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart1_rts_n_pu3 { + uart1-rts-n-pu3 { nvidia,pins = "pu3"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - uart3_cts_n_pa1 { /* DSR GPIO */ + uart3-cts-n-pa1 { /* DSR GPIO */ nvidia,pins = "uart3_cts_n_pa1"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart3_rts_n_pc0 { /* DTR GPIO */ + uart3-rts-n-pc0 { /* DTR GPIO */ nvidia,pins = "uart3_rts_n_pc0"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -622,28 +623,28 @@ }; /* Apalis UART2 */ - uart2_txd_pc2 { + uart2-txd-pc2 { nvidia,pins = "uart2_txd_pc2"; nvidia,function = "irda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - uart2_rxd_pc3 { + uart2-rxd-pc3 { nvidia,pins = "uart2_rxd_pc3"; nvidia,function = "irda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart2_cts_n_pj5 { + uart2-cts-n-pj5 { nvidia,pins = "uart2_cts_n_pj5"; nvidia,function = "uartb"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart2_rts_n_pj6 { + uart2-rts-n-pj6 { nvidia,pins = "uart2_rts_n_pj6"; nvidia,function = "uartb"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -652,14 +653,14 @@ }; /* Apalis UART3 */ - uart3_txd_pw6 { + uart3-txd-pw6 { nvidia,pins = "uart3_txd_pw6"; nvidia,function = "uartc"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - uart3_rxd_pw7 { + uart3-rxd-pw7 { nvidia,pins = "uart3_rxd_pw7"; nvidia,function = "uartc"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -668,14 +669,14 @@ }; /* Apalis UART4 */ - uart4_rxd_pb0 { + uart4-rxd-pb0 { nvidia,pins = "pb0"; nvidia,function = "uartd"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart4_txd_pj7 { + uart4-txd-pj7 { nvidia,pins = "pj7"; nvidia,function = "uartd"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -684,7 +685,7 @@ }; /* Apalis USBH_EN */ - gen2_i2c_sda_pt6 { + gen2-i2c-sda-pt6 { nvidia,pins = "gen2_i2c_sda_pt6"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -703,7 +704,7 @@ }; /* Apalis USBO1_EN */ - gen2_i2c_scl_pt5 { + gen2-i2c-scl-pt5 { nvidia,pins = "gen2_i2c_scl_pt5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -722,7 +723,7 @@ }; /* Apalis WAKE1_MICO */ - pex_wake_n_pdd3 { + pex-wake-n-pdd3 { nvidia,pins = "pex_wake_n_pdd3"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -731,7 +732,7 @@ }; /* CORE_PWR_REQ */ - core_pwr_req { + core-pwr-req { nvidia,pins = "core_pwr_req"; nvidia,function = "pwron"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -740,7 +741,7 @@ }; /* CPU_PWR_REQ */ - cpu_pwr_req { + cpu-pwr-req { nvidia,pins = "cpu_pwr_req"; nvidia,function = "cpu"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -749,14 +750,14 @@ }; /* DVFS */ - dvfs_pwm_px0 { + dvfs-pwm-px0 { nvidia,pins = "dvfs_pwm_px0"; nvidia,function = "cldvfs"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dvfs_clk_px2 { + dvfs-clk-px2 { nvidia,pins = "dvfs_clk_px2"; nvidia,function = "cldvfs"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -765,70 +766,70 @@ }; /* eMMC */ - sdmmc4_dat0_paa0 { + sdmmc4-dat0-paa0 { nvidia,pins = "sdmmc4_dat0_paa0"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat1_paa1 { + sdmmc4-dat1-paa1 { nvidia,pins = "sdmmc4_dat1_paa1"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat2_paa2 { + sdmmc4-dat2-paa2 { nvidia,pins = "sdmmc4_dat2_paa2"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat3_paa3 { + sdmmc4-dat3-paa3 { nvidia,pins = "sdmmc4_dat3_paa3"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat4_paa4 { + sdmmc4-dat4-paa4 { nvidia,pins = "sdmmc4_dat4_paa4"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat5_paa5 { + sdmmc4-dat5-paa5 { nvidia,pins = "sdmmc4_dat5_paa5"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat6_paa6 { + sdmmc4-dat6-paa6 { nvidia,pins = "sdmmc4_dat6_paa6"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat7_paa7 { + sdmmc4-dat7-paa7 { nvidia,pins = "sdmmc4_dat7_paa7"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_clk_pcc4 { + sdmmc4-clk-pcc4 { nvidia,pins = "sdmmc4_clk_pcc4"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_cmd_pt7 { + sdmmc4-cmd-pt7 { nvidia,pins = "sdmmc4_cmd_pt7"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -837,7 +838,7 @@ }; /* JTAG_RTCK */ - jtag_rtck { + jtag-rtck { nvidia,pins = "jtag_rtck"; nvidia,function = "rtck"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -846,7 +847,7 @@ }; /* LAN_DEV_OFF# */ - ulpi_data5_po6 { + ulpi-data5-po6 { nvidia,pins = "ulpi_data5_po6"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -855,7 +856,7 @@ }; /* LAN_RESET# */ - kb_row10_ps2 { + kb-row10-ps2 { nvidia,pins = "kb_row10_ps2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -864,7 +865,7 @@ }; /* LAN_WAKE# */ - ulpi_data4_po5 { + ulpi-data4-po5 { nvidia,pins = "ulpi_data4_po5"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -918,35 +919,35 @@ }; /* MCU SPI */ - gpio_x4_aud_px4 { + gpio-x4-aud-px4 { nvidia,pins = "gpio_x4_aud_px4"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x5_aud_px5 { + gpio-x5-aud-px5 { nvidia,pins = "gpio_x5_aud_px5"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x6_aud_px6 { /* MCU_CS */ + gpio-x6-aud-px6 { /* MCU_CS */ nvidia,pins = "gpio_x6_aud_px6"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x7_aud_px7 { + gpio-x7-aud-px7 { nvidia,pins = "gpio_x7_aud_px7"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - gpio_w2_aud_pw2 { /* MCU_CSEZP */ + gpio-w2-aud-pw2 { /* MCU_CSEZP */ nvidia,pins = "gpio_w2_aud_pw2"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -955,7 +956,7 @@ }; /* PMIC_CLK_32K */ - clk_32k_in { + clk-32k-in { nvidia,pins = "clk_32k_in"; nvidia,function = "clk"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -964,7 +965,7 @@ }; /* PMIC_CPU_OC_INT */ - clk_32k_out_pa0 { + clk-32k-out-pa0 { nvidia,pins = "clk_32k_out_pa0"; nvidia,function = "soc"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -973,7 +974,7 @@ }; /* PWR_I2C */ - pwr_i2c_scl_pz6 { + pwr-i2c-scl-pz6 { nvidia,pins = "pwr_i2c_scl_pz6"; nvidia,function = "i2cpwr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -981,7 +982,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - pwr_i2c_sda_pz7 { + pwr-i2c-sda-pz7 { nvidia,pins = "pwr_i2c_sda_pz7"; nvidia,function = "i2cpwr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -991,7 +992,7 @@ }; /* PWR_INT_N */ - pwr_int_n { + pwr-int-n { nvidia,pins = "pwr_int_n"; nvidia,function = "pmi"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -1009,7 +1010,7 @@ }; /* RESET_OUT_N */ - reset_out_n { + reset-out-n { nvidia,pins = "reset_out_n"; nvidia,function = "reset_out_n"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1018,14 +1019,14 @@ }; /* SHIFT_CTRL_DIR_IN */ - kb_row0_pr0 { + kb-row0-pr0 { nvidia,pins = "kb_row0_pr0"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row1_pr1 { + kb-row1-pr1 { nvidia,pins = "kb_row1_pr1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1034,7 +1035,7 @@ }; /* Configure level-shifter as output for HDA */ - kb_row11_ps3 { + kb-row11-ps3 { nvidia,pins = "kb_row11_ps3"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -1043,21 +1044,21 @@ }; /* SHIFT_CTRL_DIR_OUT */ - kb_col5_pq5 { + kb-col5-pq5 { nvidia,pins = "kb_col5_pq5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col6_pq6 { + kb-col6-pq6 { nvidia,pins = "kb_col6_pq6"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col7_pq7 { + kb-col7-pq7 { nvidia,pins = "kb_col7_pq7"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -1066,35 +1067,35 @@ }; /* SHIFT_CTRL_OE */ - kb_col0_pq0 { + kb-col0-pq0 { nvidia,pins = "kb_col0_pq0"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col1_pq1 { + kb-col1-pq1 { nvidia,pins = "kb_col1_pq1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col2_pq2 { + kb-col2-pq2 { nvidia,pins = "kb_col2_pq2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col4_pq4 { + kb-col4-pq4 { nvidia,pins = "kb_col4_pq4"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row2_pr2 { + kb-row2-pr2 { nvidia,pins = "kb_row2_pr2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1112,7 +1113,7 @@ }; /* TOUCH_INT */ - gpio_w3_aud_pw3 { + gpio-w3-aud-pw3 { nvidia,pins = "gpio_w3_aud_pw3"; nvidia,function = "spi6"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1253,189 +1254,189 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap1_fs_pn0 { /* NC */ + dap1-fs-pn0 { /* NC */ nvidia,pins = "dap1_fs_pn0"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap1_din_pn1 { /* NC */ + dap1-din-pn1 { /* NC */ nvidia,pins = "dap1_din_pn1"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap1_sclk_pn3 { /* NC */ + dap1-sclk-pn3 { /* NC */ nvidia,pins = "dap1_sclk_pn3"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data7_po0 { /* NC */ + ulpi-data7-po0 { /* NC */ nvidia,pins = "ulpi_data7_po0"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data0_po1 { /* NC */ + ulpi-data0-po1 { /* NC */ nvidia,pins = "ulpi_data0_po1"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data1_po2 { /* NC */ + ulpi-data1-po2 { /* NC */ nvidia,pins = "ulpi_data1_po2"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data2_po3 { /* NC */ + ulpi-data2-po3 { /* NC */ nvidia,pins = "ulpi_data2_po3"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data3_po4 { /* NC */ + ulpi-data3-po4 { /* NC */ nvidia,pins = "ulpi_data3_po4"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data6_po7 { /* NC */ + ulpi-data6-po7 { /* NC */ nvidia,pins = "ulpi_data6_po7"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap4_fs_pp4 { /* NC */ + dap4-fs-pp4 { /* NC */ nvidia,pins = "dap4_fs_pp4"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap4_din_pp5 { /* NC */ + dap4-din-pp5 { /* NC */ nvidia,pins = "dap4_din_pp5"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap4_dout_pp6 { /* NC */ + dap4-dout-pp6 { /* NC */ nvidia,pins = "dap4_dout_pp6"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap4_sclk_pp7 { /* NC */ + dap4-sclk-pp7 { /* NC */ nvidia,pins = "dap4_sclk_pp7"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col3_pq3 { /* NC */ + kb-col3-pq3 { /* NC */ nvidia,pins = "kb_col3_pq3"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row3_pr3 { /* NC */ + kb-row3-pr3 { /* NC */ nvidia,pins = "kb_row3_pr3"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row4_pr4 { /* NC */ + kb-row4-pr4 { /* NC */ nvidia,pins = "kb_row4_pr4"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row5_pr5 { /* NC */ + kb-row5-pr5 { /* NC */ nvidia,pins = "kb_row5_pr5"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row6_pr6 { /* NC */ + kb-row6-pr6 { /* NC */ nvidia,pins = "kb_row6_pr6"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row7_pr7 { /* NC */ + kb-row7-pr7 { /* NC */ nvidia,pins = "kb_row7_pr7"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row8_ps0 { /* NC */ + kb-row8-ps0 { /* NC */ nvidia,pins = "kb_row8_ps0"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row9_ps1 { /* NC */ + kb-row9-ps1 { /* NC */ nvidia,pins = "kb_row9_ps1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row12_ps4 { /* NC */ + kb-row12-ps4 { /* NC */ nvidia,pins = "kb_row12_ps4"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row13_ps5 { /* NC */ + kb-row13-ps5 { /* NC */ nvidia,pins = "kb_row13_ps5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row14_ps6 { /* NC */ + kb-row14-ps6 { /* NC */ nvidia,pins = "kb_row14_ps6"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row15_ps7 { /* NC */ + kb-row15-ps7 { /* NC */ nvidia,pins = "kb_row15_ps7"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row16_pt0 { /* NC */ + kb-row16-pt0 { /* NC */ nvidia,pins = "kb_row16_pt0"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row17_pt1 { /* NC */ + kb-row17-pt1 { /* NC */ nvidia,pins = "kb_row17_pt1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1467,14 +1468,14 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x1_aud_px1 { /* NC */ + gpio-x1-aud-px1 { /* NC */ nvidia,pins = "gpio_x1_aud_px1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x3_aud_px3 { /* NC */ + gpio-x3-aud-px3 { /* NC */ nvidia,pins = "gpio_x3_aud_px3"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1502,14 +1503,14 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - clk3_req_pee1 { /* NC */ + clk3-req-pee1 { /* NC */ nvidia,pins = "clk3_req_pee1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap_mclk1_req_pee2 { /* NC */ + dap-mclk1-req-pee2 { /* NC */ nvidia,pins = "dap_mclk1_req_pee2"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1525,7 +1526,7 @@ * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 * bits being set to 0xfffd according to the TRM! */ - sdmmc3_clk_lb_out_pee4 { /* NC */ + sdmmc3-clk-lb-out-pee4 { /* NC */ nvidia,pins = "sdmmc3_clk_lb_out_pee4"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1560,8 +1561,9 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - VDDA-supply = <®_3v3>; - VDDIO-supply = <&vddio_1v8>; + VDDA-supply = <®_module_3v3_audio>; + VDDD-supply = <®_1v8_vddio>; + VDDIO-supply = <®_1v8_vddio>; clocks = <&tegra_car TEGRA124_CLK_EXTERN1>; }; @@ -1578,14 +1580,14 @@ pinctrl-0 = <&as3722_default>; as3722_default: pinmux { - gpio2_7 { + gpio2-7 { pins = "gpio2", /* PWR_EN_+V3.3 */ "gpio7"; /* +V1.6_LPO */ function = "gpio"; bias-pull-up; }; - gpio0_1_3_4_5_6 { + gpio0-1-3-4-5-6 { pins = "gpio0", "gpio1", "gpio3", "gpio4", "gpio5", "gpio6"; bias-high-impedance; @@ -1593,18 +1595,18 @@ }; regulators { - vsup-sd2-supply = <®_3v3>; - vsup-sd3-supply = <®_3v3>; - vsup-sd4-supply = <®_3v3>; - vsup-sd5-supply = <®_3v3>; - vin-ldo0-supply = <&vddio_ddr_1v35>; - vin-ldo1-6-supply = <®_3v3>; - vin-ldo2-5-7-supply = <&vddio_1v8>; - vin-ldo3-4-supply = <®_3v3>; - vin-ldo9-10-supply = <®_3v3>; - vin-ldo11-supply = <®_3v3>; - - vdd_cpu: sd0 { + vsup-sd2-supply = <®_module_3v3>; + vsup-sd3-supply = <®_module_3v3>; + vsup-sd4-supply = <®_module_3v3>; + vsup-sd5-supply = <®_module_3v3>; + vin-ldo0-supply = <®_1v35_vddio_ddr>; + vin-ldo1-6-supply = <®_module_3v3>; + vin-ldo2-5-7-supply = <®_1v8_vddio>; + vin-ldo3-4-supply = <®_module_3v3>; + vin-ldo9-10-supply = <®_module_3v3>; + vin-ldo11-supply = <®_module_3v3>; + + reg_vdd_cpu: sd0 { regulator-name = "+VDD_CPU_AP"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1400000>; @@ -1626,7 +1628,7 @@ ams,ext-control = <1>; }; - vddio_ddr_1v35: sd2 { + reg_1v35_vddio_ddr: sd2 { regulator-name = "+V1.35_VDDIO_DDR(sd2)"; regulator-min-microvolt = <1350000>; @@ -1644,13 +1646,13 @@ regulator-boot-on; }; - vdd_1v05: sd4 { + reg_1v05_vdd: sd4 { regulator-name = "+V1.05"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; }; - vddio_1v8: sd5 { + reg_1v8_vddio: sd5 { regulator-name = "+V1.8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -1658,7 +1660,7 @@ regulator-always-on; }; - vdd_gpu: sd6 { + reg_vdd_gpu: sd6 { regulator-name = "+VDD_GPU_AP"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <1200000>; @@ -1668,7 +1670,7 @@ regulator-always-on; }; - avdd_1v05: ldo0 { + reg_1v05_avdd: ldo0 { regulator-name = "+V1.05_AVDD"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; @@ -1743,12 +1745,13 @@ * TMP451 temperature sensor * Note: THERM_N directly connected to AS3722 PMIC THERM */ - temperature-sensor@4c { + temp-sensor@4c { compatible = "ti,tmp451"; reg = <0x4c>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; #thermal-sensor-cells = <1>; + vcc-supply = <®_module_3v3>; }; }; @@ -1780,9 +1783,9 @@ sata@70020000 { phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; phy-names = "sata-0"; - avdd-supply = <&vdd_1v05>; - hvdd-supply = <®_3v3>; - vddio-supply = <&vdd_1v05>; + avdd-supply = <®_1v05_vdd>; + hvdd-supply = <®_module_3v3>; + vddio-supply = <®_1v05_vdd>; }; usb@70090000 { @@ -1793,14 +1796,14 @@ <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0"; - avddio-pex-supply = <&vdd_1v05>; - avdd-pll-erefe-supply = <&avdd_1v05>; - avdd-pll-utmip-supply = <&vddio_1v8>; - avdd-usb-ss-pll-supply = <&vdd_1v05>; - avdd-usb-supply = <®_3v3>; - dvddio-pex-supply = <&vdd_1v05>; - hvdd-usb-ss-pll-e-supply = <®_3v3>; - hvdd-usb-ss-supply = <®_3v3>; + avddio-pex-supply = <®_1v05_vdd>; + avdd-pll-erefe-supply = <®_1v05_avdd>; + avdd-pll-utmip-supply = <®_1v8_vddio>; + avdd-usb-ss-pll-supply = <®_1v05_vdd>; + avdd-usb-supply = <®_module_3v3>; + dvddio-pex-supply = <®_1v05_vdd>; + hvdd-usb-ss-pll-e-supply = <®_module_3v3>; + hvdd-usb-ss-supply = <®_module_3v3>; }; padctl@7009f000 { @@ -1810,18 +1813,18 @@ lanes { usb2-0 { - nvidia,function = "xusb"; status = "okay"; + nvidia,function = "xusb"; }; usb2-1 { - nvidia,function = "xusb"; status = "okay"; + nvidia,function = "xusb"; }; usb2-2 { - nvidia,function = "xusb"; status = "okay"; + nvidia,function = "xusb"; }; }; }; @@ -1831,28 +1834,28 @@ lanes { pcie-0 { - nvidia,function = "usb3-ss"; status = "okay"; + nvidia,function = "usb3-ss"; }; pcie-1 { - nvidia,function = "usb3-ss"; status = "okay"; + nvidia,function = "usb3-ss"; }; pcie-2 { - nvidia,function = "pcie"; status = "okay"; + nvidia,function = "pcie"; }; pcie-3 { - nvidia,function = "pcie"; status = "okay"; + nvidia,function = "pcie"; }; pcie-4 { - nvidia,function = "pcie"; status = "okay"; + nvidia,function = "pcie"; }; }; }; @@ -1862,8 +1865,8 @@ lanes { sata-0 { - nvidia,function = "sata"; status = "okay"; + nvidia,function = "sata"; }; }; }; @@ -1874,7 +1877,6 @@ usb2-0 { status = "okay"; mode = "otg"; - vbus-supply = <®_usbo1_vbus>; }; @@ -1882,7 +1884,6 @@ usb2-1 { status = "okay"; mode = "host"; - vbus-supply = <®_usbh_vbus>; }; @@ -1890,18 +1891,19 @@ usb2-2 { status = "okay"; mode = "host"; - vbus-supply = <®_usbh_vbus>; }; usb3-0 { - nvidia,usb2-companion = <2>; status = "okay"; + nvidia,usb2-companion = <2>; + vbus-supply = <®_usbh_vbus>; }; usb3-1 { - nvidia,usb2-companion = <0>; status = "okay"; + nvidia,usb2-companion = <0>; + vbus-supply = <®_usbo1_vbus>; }; }; }; @@ -1911,13 +1913,16 @@ status = "okay"; bus-width = <8>; non-removable; + vmmc-supply = <®_module_3v3>; /* VCC */ + vqmmc-supply = <®_1v8_vddio>; /* VCCQ */ + mmc-ddr-1_8v; }; /* CPU DFLL clock */ clock@70110000 { status = "okay"; - vdd-cpu-supply = <&vdd_cpu>; nvidia,i2c-fs-rate = <400000>; + vdd-cpu-supply = <®_vdd_cpu>; }; ahub@70300000 { @@ -1926,22 +1931,15 @@ }; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: osc3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; cpus { cpu@0 { - vdd-cpu-supply = <&vdd_cpu>; + vdd-cpu-supply = <®_vdd_cpu>; }; }; @@ -1951,7 +1949,7 @@ regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; - vin-supply = <&vdd_1v05>; + vin-supply = <®_1v05_vdd>; }; reg_3v3_mxm: regulator-3v3-mxm { @@ -1963,7 +1961,15 @@ regulator-boot-on; }; - reg_3v3: regulator-3v3 { + reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_1v05_vdd>; + }; + + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; regulator-name = "+V3.3"; regulator-min-microvolt = <3300000>; @@ -1976,12 +1982,12 @@ vin-supply = <®_3v3_mxm>; }; - reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + reg_module_3v3_audio: regulator-module-3v3-audio { compatible = "regulator-fixed"; - regulator-name = "+V3.3_AVDD_HDMI"; + regulator-name = "+V3.3_AUDIO_AVDD_S"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_1v05>; + regulator-always-on; }; sound { @@ -2035,7 +2041,7 @@ &gpio { /* I210 Gigabit Ethernet Controller Reset */ - lan_reset_n { + lan-reset-n { gpio-hog; gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>; output-high; @@ -2043,7 +2049,7 @@ }; /* Control MXM3 pin 26 Reset Module Output Carrier Input */ - reset_moci_ctrl { + reset-moci-ctrl { gpio-hog; gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>; output-high; diff --git a/dts/src/arm/tegra124-apalis.dtsi b/dts/src/arm/tegra124-apalis.dtsi index 0f0d4a4988..13c93cd507 100644 --- a/dts/src/arm/tegra124-apalis.dtsi +++ b/dts/src/arm/tegra124-apalis.dtsi @@ -47,22 +47,19 @@ * Compatible for Revisions 2GB: V1.0A, V1.0B, V1.1A */ / { - model = "Toradex Apalis TK1"; - compatible = "toradex,apalis-tk1", "nvidia,tegra124"; - memory@80000000 { reg = <0x0 0x80000000 0x0 0x80000000>; }; pcie@1003000 { status = "okay"; - avddio-pex-supply = <&vdd_1v05>; - avdd-pex-pll-supply = <&vdd_1v05>; - avdd-pll-erefe-supply = <&avdd_1v05>; - dvddio-pex-supply = <&vdd_1v05>; - hvdd-pex-pll-e-supply = <®_3v3>; - hvdd-pex-supply = <®_3v3>; - vddio-pex-ctl-supply = <®_3v3>; + avddio-pex-supply = <®_1v05_vdd>; + avdd-pex-pll-supply = <®_1v05_vdd>; + avdd-pll-erefe-supply = <®_1v05_avdd>; + dvddio-pex-supply = <®_1v05_vdd>; + hvdd-pex-pll-e-supply = <®_module_3v3>; + hvdd-pex-supply = <®_module_3v3>; + vddio-pex-ctl-supply = <®_module_3v3>; /* Apalis PCIe (additional lane Apalis type specific) */ pci@1,0 { @@ -77,16 +74,21 @@ phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>; phy-names = "pcie-0"; status = "okay"; + + pcie@0 { + reg = <0 0 0 0 0>; + local-mac-address = [00 00 00 00 00 00]; + }; }; }; host1x@50000000 { hdmi@54280000 { - pll-supply = <®_1v05_avdd_hdmi_pll>; - vdd-supply = <®_3v3_avdd_hdmi>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + pll-supply = <®_1v05_avdd_hdmi_pll>; + vdd-supply = <®_3v3_avdd_hdmi>; }; }; @@ -95,44 +97,44 @@ * Node left disabled on purpose - the bootloader will enable * it after having set the VPR up */ - vdd-supply = <&vdd_gpu>; + vdd-supply = <®_vdd_gpu>; }; - pinmux: pinmux@70000868 { + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; state_default: pinmux { /* Analogue Audio (On-module) */ - dap3_fs_pp0 { + dap3-fs-pp0 { nvidia,pins = "dap3_fs_pp0"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap3_din_pp1 { + dap3-din-pp1 { nvidia,pins = "dap3_din_pp1"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap3_dout_pp2 { + dap3-dout-pp2 { nvidia,pins = "dap3_dout_pp2"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap3_sclk_pp3 { + dap3-sclk-pp3 { nvidia,pins = "dap3_sclk_pp3"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap_mclk1_pw4 { + dap-mclk1-pw4 { nvidia,pins = "dap_mclk1_pw4"; nvidia,function = "extperiph1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -159,7 +161,7 @@ }; /* Apalis CAM1_MCLK */ - cam_mclk_pcc0 { + cam-mclk-pcc0 { nvidia,pins = "cam_mclk_pcc0"; nvidia,function = "vi_alt3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -168,28 +170,28 @@ }; /* Apalis Digital Audio */ - dap2_fs_pa2 { + dap2-fs-pa2 { nvidia,pins = "dap2_fs_pa2"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap2_sclk_pa3 { + dap2-sclk-pa3 { nvidia,pins = "dap2_sclk_pa3"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap2_din_pa4 { + dap2-din-pa4 { nvidia,pins = "dap2_din_pa4"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dap2_dout_pa5 { + dap2-dout-pa5 { nvidia,pins = "dap2_dout_pa5"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -202,7 +204,7 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - clk3_out_pee0 { + clk3-out-pee0 { nvidia,pins = "clk3_out_pee0"; nvidia,function = "extperiph3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -211,49 +213,49 @@ }; /* Apalis GPIO */ - ddc_scl_pv4 { + ddc-scl-pv4 { nvidia,pins = "ddc_scl_pv4"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - ddc_sda_pv5 { + ddc-sda-pv5 { nvidia,pins = "ddc_sda_pv5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - pex_l0_rst_n_pdd1 { + pex-l0-rst-n-pdd1 { nvidia,pins = "pex_l0_rst_n_pdd1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - pex_l0_clkreq_n_pdd2 { + pex-l0-clkreq-n-pdd2 { nvidia,pins = "pex_l0_clkreq_n_pdd2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - pex_l1_rst_n_pdd5 { + pex-l1-rst-n-pdd5 { nvidia,pins = "pex_l1_rst_n_pdd5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - pex_l1_clkreq_n_pdd6 { + pex-l1-clkreq-n-pdd6 { nvidia,pins = "pex_l1_clkreq_n_pdd6"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - dp_hpd_pff0 { + dp-hpd-pff0 { nvidia,pins = "dp_hpd_pff0"; nvidia,function = "dp"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -277,7 +279,7 @@ }; /* Apalis HDMI1_CEC */ - hdmi_cec_pee3 { + hdmi-cec-pee3 { nvidia,pins = "hdmi_cec_pee3"; nvidia,function = "cec"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -287,7 +289,7 @@ }; /* Apalis HDMI1_HPD */ - hdmi_int_pn7 { + hdmi-int-pn7 { nvidia,pins = "hdmi_int_pn7"; nvidia,function = "rsvd1"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -297,7 +299,7 @@ }; /* Apalis I2C1 */ - gen1_i2c_scl_pc4 { + gen1-i2c-scl-pc4 { nvidia,pins = "gen1_i2c_scl_pc4"; nvidia,function = "i2c1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -305,7 +307,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - gen1_i2c_sda_pc5 { + gen1-i2c-sda-pc5 { nvidia,pins = "gen1_i2c_sda_pc5"; nvidia,function = "i2c1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -315,7 +317,7 @@ }; /* Apalis I2C2 (DDC) */ - gen2_i2c_scl_pt5 { + gen2-i2c-scl-pt5 { nvidia,pins = "gen2_i2c_scl_pt5"; nvidia,function = "i2c2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -323,7 +325,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - gen2_i2c_sda_pt6 { + gen2-i2c-sda-pt6 { nvidia,pins = "gen2_i2c_sda_pt6"; nvidia,function = "i2c2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -333,7 +335,7 @@ }; /* Apalis I2C3 (CAM) */ - cam_i2c_scl_pbb1 { + cam-i2c-scl-pbb1 { nvidia,pins = "cam_i2c_scl_pbb1"; nvidia,function = "i2c3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -341,7 +343,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - cam_i2c_sda_pbb2 { + cam-i2c-sda-pbb2 { nvidia,pins = "cam_i2c_sda_pbb2"; nvidia,function = "i2c3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -351,77 +353,77 @@ }; /* Apalis MMC1 */ - sdmmc1_cd_n_pv3 { /* CD# GPIO */ + sdmmc1-cd-n-pv3 { /* CD# GPIO */ nvidia,pins = "sdmmc1_wp_n_pv3"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - clk2_out_pw5 { /* D5 GPIO */ + clk2-out-pw5 { /* D5 GPIO */ nvidia,pins = "clk2_out_pw5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_dat3_py4 { + sdmmc1-dat3-py4 { nvidia,pins = "sdmmc1_dat3_py4"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_dat2_py5 { + sdmmc1-dat2-py5 { nvidia,pins = "sdmmc1_dat2_py5"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_dat1_py6 { + sdmmc1-dat1-py6 { nvidia,pins = "sdmmc1_dat1_py6"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_dat0_py7 { + sdmmc1-dat0-py7 { nvidia,pins = "sdmmc1_dat0_py7"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_clk_pz0 { + sdmmc1-clk-pz0 { nvidia,pins = "sdmmc1_clk_pz0"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc1_cmd_pz1 { + sdmmc1-cmd-pz1 { nvidia,pins = "sdmmc1_cmd_pz1"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - clk2_req_pcc5 { /* D4 GPIO */ + clk2-req-pcc5 { /* D4 GPIO */ nvidia,pins = "clk2_req_pcc5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */ + sdmmc3-clk-lb-in-pee5 { /* D6 GPIO */ nvidia,pins = "sdmmc3_clk_lb_in_pee5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - usb_vbus_en2_pff1 { /* D7 GPIO */ + usb-vbus-en2-pff1 { /* D7 GPIO */ nvidia,pins = "usb_vbus_en2_pff1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -461,7 +463,7 @@ }; /* Apalis SATA1_ACT# */ - dap1_dout_pn2 { + dap1-dout-pn2 { nvidia,pins = "dap1_dout_pn2"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -470,49 +472,49 @@ }; /* Apalis SD1 */ - sdmmc3_clk_pa6 { + sdmmc3-clk-pa6 { nvidia,pins = "sdmmc3_clk_pa6"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_cmd_pa7 { + sdmmc3-cmd-pa7 { nvidia,pins = "sdmmc3_cmd_pa7"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_dat3_pb4 { + sdmmc3-dat3-pb4 { nvidia,pins = "sdmmc3_dat3_pb4"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_dat2_pb5 { + sdmmc3-dat2-pb5 { nvidia,pins = "sdmmc3_dat2_pb5"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_dat1_pb6 { + sdmmc3-dat1-pb6 { nvidia,pins = "sdmmc3_dat1_pb6"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_dat0_pb7 { + sdmmc3-dat0-pb7 { nvidia,pins = "sdmmc3_dat0_pb7"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc3_cd_n_pv2 { /* CD# GPIO */ + sdmmc3-cd-n-pv2 { /* CD# GPIO */ nvidia,pins = "sdmmc3_cd_n_pv2"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -521,14 +523,14 @@ }; /* Apalis SPDIF */ - spdif_out_pk5 { + spdif-out-pk5 { nvidia,pins = "spdif_out_pk5"; nvidia,function = "spdif"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - spdif_in_pk6 { + spdif-in-pk6 { nvidia,pins = "spdif_in_pk6"; nvidia,function = "spdif"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -537,28 +539,28 @@ }; /* Apalis SPI1 */ - ulpi_clk_py0 { + ulpi-clk-py0 { nvidia,pins = "ulpi_clk_py0"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_dir_py1 { + ulpi-dir-py1 { nvidia,pins = "ulpi_dir_py1"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - ulpi_nxt_py2 { + ulpi-nxt-py2 { nvidia,pins = "ulpi_nxt_py2"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_stp_py3 { + ulpi-stp-py3 { nvidia,pins = "ulpi_stp_py3"; nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -611,42 +613,42 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart1_txd_pu0 { + uart1-txd-pu0 { nvidia,pins = "pu0"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - uart1_rxd_pu1 { + uart1-rxd-pu1 { nvidia,pins = "pu1"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart1_cts_n_pu2 { + uart1-cts-n-pu2 { nvidia,pins = "pu2"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart1_rts_n_pu3 { + uart1-rts-n-pu3 { nvidia,pins = "pu3"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - uart3_cts_n_pa1 { /* DSR GPIO */ + uart3-cts-n-pa1 { /* DSR GPIO */ nvidia,pins = "uart3_cts_n_pa1"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart3_rts_n_pc0 { /* DTR GPIO */ + uart3-rts-n-pc0 { /* DTR GPIO */ nvidia,pins = "uart3_rts_n_pc0"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -655,28 +657,28 @@ }; /* Apalis UART2 */ - uart2_txd_pc2 { + uart2-txd-pc2 { nvidia,pins = "uart2_txd_pc2"; nvidia,function = "irda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - uart2_rxd_pc3 { + uart2-rxd-pc3 { nvidia,pins = "uart2_rxd_pc3"; nvidia,function = "irda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart2_cts_n_pj5 { + uart2-cts-n-pj5 { nvidia,pins = "uart2_cts_n_pj5"; nvidia,function = "uartb"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart2_rts_n_pj6 { + uart2-rts-n-pj6 { nvidia,pins = "uart2_rts_n_pj6"; nvidia,function = "uartb"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -685,14 +687,14 @@ }; /* Apalis UART3 */ - uart3_txd_pw6 { + uart3-txd-pw6 { nvidia,pins = "uart3_txd_pw6"; nvidia,function = "uartc"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - uart3_rxd_pw7 { + uart3-rxd-pw7 { nvidia,pins = "uart3_rxd_pw7"; nvidia,function = "uartc"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -701,14 +703,14 @@ }; /* Apalis UART4 */ - uart4_rxd_pb0 { + uart4-rxd-pb0 { nvidia,pins = "pb0"; nvidia,function = "uartd"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - uart4_txd_pj7 { + uart4-txd-pj7 { nvidia,pins = "pj7"; nvidia,function = "uartd"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -717,7 +719,7 @@ }; /* Apalis USBH_EN */ - usb_vbus_en1_pn5 { + usb-vbus-en1-pn5 { nvidia,pins = "usb_vbus_en1_pn5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -736,7 +738,7 @@ }; /* Apalis USBO1_EN */ - usb_vbus_en0_pn4 { + usb-vbus-en0-pn4 { nvidia,pins = "usb_vbus_en0_pn4"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -755,7 +757,7 @@ }; /* Apalis WAKE1_MICO */ - pex_wake_n_pdd3 { + pex-wake-n-pdd3 { nvidia,pins = "pex_wake_n_pdd3"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -764,7 +766,7 @@ }; /* CORE_PWR_REQ */ - core_pwr_req { + core-pwr-req { nvidia,pins = "core_pwr_req"; nvidia,function = "pwron"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -773,7 +775,7 @@ }; /* CPU_PWR_REQ */ - cpu_pwr_req { + cpu-pwr-req { nvidia,pins = "cpu_pwr_req"; nvidia,function = "cpu"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -782,14 +784,14 @@ }; /* DVFS */ - dvfs_pwm_px0 { + dvfs-pwm-px0 { nvidia,pins = "dvfs_pwm_px0"; nvidia,function = "cldvfs"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dvfs_clk_px2 { + dvfs-clk-px2 { nvidia,pins = "dvfs_clk_px2"; nvidia,function = "cldvfs"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -798,70 +800,70 @@ }; /* eMMC */ - sdmmc4_dat0_paa0 { + sdmmc4-dat0-paa0 { nvidia,pins = "sdmmc4_dat0_paa0"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat1_paa1 { + sdmmc4-dat1-paa1 { nvidia,pins = "sdmmc4_dat1_paa1"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat2_paa2 { + sdmmc4-dat2-paa2 { nvidia,pins = "sdmmc4_dat2_paa2"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat3_paa3 { + sdmmc4-dat3-paa3 { nvidia,pins = "sdmmc4_dat3_paa3"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat4_paa4 { + sdmmc4-dat4-paa4 { nvidia,pins = "sdmmc4_dat4_paa4"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat5_paa5 { + sdmmc4-dat5-paa5 { nvidia,pins = "sdmmc4_dat5_paa5"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat6_paa6 { + sdmmc4-dat6-paa6 { nvidia,pins = "sdmmc4_dat6_paa6"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat7_paa7 { + sdmmc4-dat7-paa7 { nvidia,pins = "sdmmc4_dat7_paa7"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_clk_pcc4 { + sdmmc4-clk-pcc4 { nvidia,pins = "sdmmc4_clk_pcc4"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_cmd_pt7 { + sdmmc4-cmd-pt7 { nvidia,pins = "sdmmc4_cmd_pt7"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -870,7 +872,7 @@ }; /* JTAG_RTCK */ - jtag_rtck { + jtag-rtck { nvidia,pins = "jtag_rtck"; nvidia,function = "rtck"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -879,7 +881,7 @@ }; /* LAN_DEV_OFF# */ - ulpi_data5_po6 { + ulpi-data5-po6 { nvidia,pins = "ulpi_data5_po6"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -888,7 +890,7 @@ }; /* LAN_RESET# */ - kb_row10_ps2 { + kb-row10-ps2 { nvidia,pins = "kb_row10_ps2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -897,7 +899,7 @@ }; /* LAN_WAKE# */ - ulpi_data4_po5 { + ulpi-data4-po5 { nvidia,pins = "ulpi_data4_po5"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -951,35 +953,35 @@ }; /* MCU SPI */ - gpio_x4_aud_px4 { + gpio-x4-aud-px4 { nvidia,pins = "gpio_x4_aud_px4"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x5_aud_px5 { + gpio-x5-aud-px5 { nvidia,pins = "gpio_x5_aud_px5"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x6_aud_px6 { /* MCU_CS */ + gpio-x6-aud-px6 { /* MCU_CS */ nvidia,pins = "gpio_x6_aud_px6"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x7_aud_px7 { + gpio-x7-aud-px7 { nvidia,pins = "gpio_x7_aud_px7"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - gpio_w2_aud_pw2 { /* MCU_CSEZP */ + gpio-w2-aud-pw2 { /* MCU_CSEZP */ nvidia,pins = "gpio_w2_aud_pw2"; nvidia,function = "spi2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -988,7 +990,7 @@ }; /* PMIC_CLK_32K */ - clk_32k_in { + clk-32k-in { nvidia,pins = "clk_32k_in"; nvidia,function = "clk"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -997,7 +999,7 @@ }; /* PMIC_CPU_OC_INT */ - clk_32k_out_pa0 { + clk-32k-out-pa0 { nvidia,pins = "clk_32k_out_pa0"; nvidia,function = "soc"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1006,7 +1008,7 @@ }; /* PWR_I2C */ - pwr_i2c_scl_pz6 { + pwr-i2c-scl-pz6 { nvidia,pins = "pwr_i2c_scl_pz6"; nvidia,function = "i2cpwr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1014,7 +1016,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; - pwr_i2c_sda_pz7 { + pwr-i2c-sda-pz7 { nvidia,pins = "pwr_i2c_sda_pz7"; nvidia,function = "i2cpwr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1024,7 +1026,7 @@ }; /* PWR_INT_N */ - pwr_int_n { + pwr-int-n { nvidia,pins = "pwr_int_n"; nvidia,function = "pmi"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -1042,7 +1044,7 @@ }; /* RESET_OUT_N */ - reset_out_n { + reset-out-n { nvidia,pins = "reset_out_n"; nvidia,function = "reset_out_n"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1051,14 +1053,14 @@ }; /* SHIFT_CTRL_DIR_IN */ - kb_row0_pr0 { + kb-row0-pr0 { nvidia,pins = "kb_row0_pr0"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row1_pr1 { + kb-row1-pr1 { nvidia,pins = "kb_row1_pr1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1067,7 +1069,7 @@ }; /* Configure level-shifter as output for HDA */ - kb_row11_ps3 { + kb-row11-ps3 { nvidia,pins = "kb_row11_ps3"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -1076,21 +1078,21 @@ }; /* SHIFT_CTRL_DIR_OUT */ - kb_col5_pq5 { + kb-col5-pq5 { nvidia,pins = "kb_col5_pq5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col6_pq6 { + kb-col6-pq6 { nvidia,pins = "kb_col6_pq6"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col7_pq7 { + kb-col7-pq7 { nvidia,pins = "kb_col7_pq7"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; @@ -1099,35 +1101,35 @@ }; /* SHIFT_CTRL_OE */ - kb_col0_pq0 { + kb-col0-pq0 { nvidia,pins = "kb_col0_pq0"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col1_pq1 { + kb-col1-pq1 { nvidia,pins = "kb_col1_pq1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col2_pq2 { + kb-col2-pq2 { nvidia,pins = "kb_col2_pq2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col4_pq4 { + kb-col4-pq4 { nvidia,pins = "kb_col4_pq4"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row2_pr2 { + kb-row2-pr2 { nvidia,pins = "kb_row2_pr2"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1145,7 +1147,7 @@ }; /* TOUCH_INT */ - gpio_w3_aud_pw3 { + gpio-w3-aud-pw3 { nvidia,pins = "gpio_w3_aud_pw3"; nvidia,function = "spi6"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1286,189 +1288,189 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap1_fs_pn0 { /* NC */ + dap1-fs-pn0 { /* NC */ nvidia,pins = "dap1_fs_pn0"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap1_din_pn1 { /* NC */ + dap1-din-pn1 { /* NC */ nvidia,pins = "dap1_din_pn1"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap1_sclk_pn3 { /* NC */ + dap1-sclk-pn3 { /* NC */ nvidia,pins = "dap1_sclk_pn3"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data7_po0 { /* NC */ + ulpi-data7-po0 { /* NC */ nvidia,pins = "ulpi_data7_po0"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data0_po1 { /* NC */ + ulpi-data0-po1 { /* NC */ nvidia,pins = "ulpi_data0_po1"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data1_po2 { /* NC */ + ulpi-data1-po2 { /* NC */ nvidia,pins = "ulpi_data1_po2"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data2_po3 { /* NC */ + ulpi-data2-po3 { /* NC */ nvidia,pins = "ulpi_data2_po3"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data3_po4 { /* NC */ + ulpi-data3-po4 { /* NC */ nvidia,pins = "ulpi_data3_po4"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - ulpi_data6_po7 { /* NC */ + ulpi-data6-po7 { /* NC */ nvidia,pins = "ulpi_data6_po7"; nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap4_fs_pp4 { /* NC */ + dap4-fs-pp4 { /* NC */ nvidia,pins = "dap4_fs_pp4"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap4_din_pp5 { /* NC */ + dap4-din-pp5 { /* NC */ nvidia,pins = "dap4_din_pp5"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap4_dout_pp6 { /* NC */ + dap4-dout-pp6 { /* NC */ nvidia,pins = "dap4_dout_pp6"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap4_sclk_pp7 { /* NC */ + dap4-sclk-pp7 { /* NC */ nvidia,pins = "dap4_sclk_pp7"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_col3_pq3 { /* NC */ + kb-col3-pq3 { /* NC */ nvidia,pins = "kb_col3_pq3"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row3_pr3 { /* NC */ + kb-row3-pr3 { /* NC */ nvidia,pins = "kb_row3_pr3"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row4_pr4 { /* NC */ + kb-row4-pr4 { /* NC */ nvidia,pins = "kb_row4_pr4"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row5_pr5 { /* NC */ + kb-row5-pr5 { /* NC */ nvidia,pins = "kb_row5_pr5"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row6_pr6 { /* NC */ + kb-row6-pr6 { /* NC */ nvidia,pins = "kb_row6_pr6"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row7_pr7 { /* NC */ + kb-row7-pr7 { /* NC */ nvidia,pins = "kb_row7_pr7"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row8_ps0 { /* NC */ + kb-row8-ps0 { /* NC */ nvidia,pins = "kb_row8_ps0"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row9_ps1 { /* NC */ + kb-row9-ps1 { /* NC */ nvidia,pins = "kb_row9_ps1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row12_ps4 { /* NC */ + kb-row12-ps4 { /* NC */ nvidia,pins = "kb_row12_ps4"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row13_ps5 { /* NC */ + kb-row13-ps5 { /* NC */ nvidia,pins = "kb_row13_ps5"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row14_ps6 { /* NC */ + kb-row14-ps6 { /* NC */ nvidia,pins = "kb_row14_ps6"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row15_ps7 { /* NC */ + kb-row15-ps7 { /* NC */ nvidia,pins = "kb_row15_ps7"; nvidia,function = "rsvd3"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row16_pt0 { /* NC */ + kb-row16-pt0 { /* NC */ nvidia,pins = "kb_row16_pt0"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - kb_row17_pt1 { /* NC */ + kb-row17-pt1 { /* NC */ nvidia,pins = "kb_row17_pt1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1496,14 +1498,14 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x1_aud_px1 { /* NC */ + gpio-x1-aud-px1 { /* NC */ nvidia,pins = "gpio_x1_aud_px1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - gpio_x3_aud_px3 { /* NC */ + gpio-x3-aud-px3 { /* NC */ nvidia,pins = "gpio_x3_aud_px3"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1531,14 +1533,14 @@ nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - clk3_req_pee1 { /* NC */ + clk3-req-pee1 { /* NC */ nvidia,pins = "clk3_req_pee1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap_mclk1_req_pee2 { /* NC */ + dap-mclk1-req-pee2 { /* NC */ nvidia,pins = "dap_mclk1_req_pee2"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_DOWN>; @@ -1554,7 +1556,7 @@ * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 * bits being set to 0xfffd according to the TRM! */ - sdmmc3_clk_lb_out_pee4 { /* NC */ + sdmmc3-clk-lb-out-pee4 { /* NC */ nvidia,pins = "sdmmc3_clk_lb_out_pee4"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -1589,8 +1591,9 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - VDDA-supply = <®_3v3>; - VDDIO-supply = <&vddio_1v8>; + VDDA-supply = <®_module_3v3_audio>; + VDDD-supply = <®_1v8_vddio>; + VDDIO-supply = <®_1v8_vddio>; clocks = <&tegra_car TEGRA124_CLK_EXTERN1>; }; @@ -1607,14 +1610,14 @@ pinctrl-0 = <&as3722_default>; as3722_default: pinmux { - gpio2_7 { + gpio2-7 { pins = "gpio2", /* PWR_EN_+V3.3 */ "gpio7"; /* +V1.6_LPO */ function = "gpio"; bias-pull-up; }; - gpio0_1_3_4_5_6 { + gpio0-1-3-4-5-6 { pins = "gpio0", "gpio1", "gpio3", "gpio4", "gpio5", "gpio6"; bias-high-impedance; @@ -1622,18 +1625,18 @@ }; regulators { - vsup-sd2-supply = <®_3v3>; - vsup-sd3-supply = <®_3v3>; - vsup-sd4-supply = <®_3v3>; - vsup-sd5-supply = <®_3v3>; - vin-ldo0-supply = <&vddio_ddr_1v35>; - vin-ldo1-6-supply = <®_3v3>; - vin-ldo2-5-7-supply = <&vddio_1v8>; - vin-ldo3-4-supply = <®_3v3>; - vin-ldo9-10-supply = <®_3v3>; - vin-ldo11-supply = <®_3v3>; - - vdd_cpu: sd0 { + vsup-sd2-supply = <®_module_3v3>; + vsup-sd3-supply = <®_module_3v3>; + vsup-sd4-supply = <®_module_3v3>; + vsup-sd5-supply = <®_module_3v3>; + vin-ldo0-supply = <®_1v35_vddio_ddr>; + vin-ldo1-6-supply = <®_module_3v3>; + vin-ldo2-5-7-supply = <®_1v8_vddio>; + vin-ldo3-4-supply = <®_module_3v3>; + vin-ldo9-10-supply = <®_module_3v3>; + vin-ldo11-supply = <®_module_3v3>; + + reg_vdd_cpu: sd0 { regulator-name = "+VDD_CPU_AP"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1400000>; @@ -1655,7 +1658,7 @@ ams,ext-control = <1>; }; - vddio_ddr_1v35: sd2 { + reg_1v35_vddio_ddr: sd2 { regulator-name = "+V1.35_VDDIO_DDR(sd2)"; regulator-min-microvolt = <1350000>; @@ -1673,13 +1676,13 @@ regulator-boot-on; }; - vdd_1v05: sd4 { + reg_1v05_vdd: sd4 { regulator-name = "+V1.05"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; }; - vddio_1v8: sd5 { + reg_1v8_vddio: sd5 { regulator-name = "+V1.8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -1687,7 +1690,7 @@ regulator-always-on; }; - vdd_gpu: sd6 { + reg_vdd_gpu: sd6 { regulator-name = "+VDD_GPU_AP"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <1200000>; @@ -1697,7 +1700,7 @@ regulator-always-on; }; - avdd_1v05: ldo0 { + reg_1v05_avdd: ldo0 { regulator-name = "+V1.05_AVDD"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; @@ -1772,12 +1775,13 @@ * TMP451 temperature sensor * Note: THERM_N directly connected to AS3722 PMIC THERM */ - temperature-sensor@4c { + temp-sensor@4c { compatible = "ti,tmp451"; reg = <0x4c>; interrupt-parent = <&gpio>; interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; #thermal-sensor-cells = <1>; + vcc-supply = <®_module_3v3>; }; }; @@ -1809,9 +1813,9 @@ sata@70020000 { phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; phy-names = "sata-0"; - avdd-supply = <&vdd_1v05>; - hvdd-supply = <®_3v3>; - vddio-supply = <&vdd_1v05>; + avdd-supply = <®_1v05_vdd>; + hvdd-supply = <®_module_3v3>; + vddio-supply = <®_1v05_vdd>; }; usb@70090000 { @@ -1822,14 +1826,14 @@ <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0"; - avddio-pex-supply = <&vdd_1v05>; - avdd-pll-erefe-supply = <&avdd_1v05>; - avdd-pll-utmip-supply = <&vddio_1v8>; - avdd-usb-ss-pll-supply = <&vdd_1v05>; - avdd-usb-supply = <®_3v3>; - dvddio-pex-supply = <&vdd_1v05>; - hvdd-usb-ss-pll-e-supply = <®_3v3>; - hvdd-usb-ss-supply = <®_3v3>; + avddio-pex-supply = <®_1v05_vdd>; + avdd-pll-erefe-supply = <®_1v05_avdd>; + avdd-pll-utmip-supply = <®_1v8_vddio>; + avdd-usb-ss-pll-supply = <®_1v05_vdd>; + avdd-usb-supply = <®_module_3v3>; + dvddio-pex-supply = <®_1v05_vdd>; + hvdd-usb-ss-pll-e-supply = <®_module_3v3>; + hvdd-usb-ss-supply = <®_module_3v3>; }; padctl@7009f000 { @@ -1839,18 +1843,18 @@ lanes { usb2-0 { - nvidia,function = "xusb"; status = "okay"; + nvidia,function = "xusb"; }; usb2-1 { - nvidia,function = "xusb"; status = "okay"; + nvidia,function = "xusb"; }; usb2-2 { - nvidia,function = "xusb"; status = "okay"; + nvidia,function = "xusb"; }; }; }; @@ -1860,28 +1864,28 @@ lanes { pcie-0 { - nvidia,function = "usb3-ss"; status = "okay"; + nvidia,function = "usb3-ss"; }; pcie-1 { - nvidia,function = "usb3-ss"; status = "okay"; + nvidia,function = "usb3-ss"; }; pcie-2 { - nvidia,function = "pcie"; status = "okay"; + nvidia,function = "pcie"; }; pcie-3 { - nvidia,function = "pcie"; status = "okay"; + nvidia,function = "pcie"; }; pcie-4 { - nvidia,function = "pcie"; status = "okay"; + nvidia,function = "pcie"; }; }; }; @@ -1891,8 +1895,8 @@ lanes { sata-0 { - nvidia,function = "sata"; status = "okay"; + nvidia,function = "sata"; }; }; }; @@ -1903,7 +1907,6 @@ usb2-0 { status = "okay"; mode = "otg"; - vbus-supply = <®_usbo1_vbus>; }; @@ -1911,7 +1914,6 @@ usb2-1 { status = "okay"; mode = "host"; - vbus-supply = <®_usbh_vbus>; }; @@ -1919,18 +1921,19 @@ usb2-2 { status = "okay"; mode = "host"; - vbus-supply = <®_usbh_vbus>; }; usb3-0 { - nvidia,usb2-companion = <2>; status = "okay"; + nvidia,usb2-companion = <2>; + vbus-supply = <®_usbh_vbus>; }; usb3-1 { - nvidia,usb2-companion = <0>; status = "okay"; + nvidia,usb2-companion = <0>; + vbus-supply = <®_usbo1_vbus>; }; }; }; @@ -1940,13 +1943,16 @@ status = "okay"; bus-width = <8>; non-removable; + vmmc-supply = <®_module_3v3>; /* VCC */ + vqmmc-supply = <®_1v8_vddio>; /* VCCQ */ + mmc-ddr-1_8v; }; /* CPU DFLL clock */ clock@70110000 { status = "okay"; - vdd-cpu-supply = <&vdd_cpu>; nvidia,i2c-fs-rate = <400000>; + vdd-cpu-supply = <®_vdd_cpu>; }; ahub@70300000 { @@ -1955,22 +1961,15 @@ }; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk32k_in: osc3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; cpus { cpu@0 { - vdd-cpu-supply = <&vdd_cpu>; + vdd-cpu-supply = <®_vdd_cpu>; }; }; @@ -1980,7 +1979,7 @@ regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; - vin-supply = <&vdd_1v05>; + vin-supply = <®_1v05_vdd>; }; reg_3v3_mxm: regulator-3v3-mxm { @@ -1992,7 +1991,15 @@ regulator-boot-on; }; - reg_3v3: regulator-3v3 { + reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_1v05_vdd>; + }; + + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; regulator-name = "+V3.3"; regulator-min-microvolt = <3300000>; @@ -2005,12 +2012,12 @@ vin-supply = <®_3v3_mxm>; }; - reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + reg_module_3v3_audio: regulator-module-3v3-audio { compatible = "regulator-fixed"; - regulator-name = "+V3.3_AVDD_HDMI"; + regulator-name = "+V3.3_AUDIO_AVDD_S"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - vin-supply = <&vdd_1v05>; + regulator-always-on; }; sound { @@ -2064,7 +2071,7 @@ &gpio { /* I210 Gigabit Ethernet Controller Reset */ - lan_reset_n { + lan-reset-n { gpio-hog; gpios = <TEGRA_GPIO(S, 2) GPIO_ACTIVE_HIGH>; output-high; @@ -2072,7 +2079,7 @@ }; /* Control MXM3 pin 26 Reset Module Output Carrier Input */ - reset_moci_ctrl { + reset-moci-ctrl { gpio-hog; gpios = <TEGRA_GPIO(U, 4) GPIO_ACTIVE_HIGH>; output-high; diff --git a/dts/src/arm/tegra20-colibri-eval-v3.dts b/dts/src/arm/tegra20-colibri-eval-v3.dts new file mode 100644 index 0000000000..3c0f2681fc --- /dev/null +++ b/dts/src/arm/tegra20-colibri-eval-v3.dts @@ -0,0 +1,262 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra20-colibri.dtsi" + +/ { + model = "Toradex Colibri T20 on Colibri Evaluation Board"; + compatible = "toradex,colibri_t20-eval-v3", "toradex,colibri_t20", + "nvidia,tegra20"; + + aliases { + rtc0 = "/i2c@7000c000/rtc@68"; + rtc1 = "/i2c@7000d000/pmic@34"; + rtc2 = "/rtc@7000e000"; + serial0 = &uarta; + serial1 = &uartd; + serial2 = &uartb; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + nvidia,panel = <&panel>; + }; + }; + + hdmi@54280000 { + status = "okay"; + hdmi-supply = <®_5v0>; + }; + }; + + pinmux@70000014 { + state_default: pinmux { + bl-on { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + ddc { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + hotplug-detect { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + i2c { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + lcd { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + lm1 { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + mmc { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + mmccd { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + pwm-a-b { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + pwm-c-d { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + ssp { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + uart-a { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + uart-b { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + uart-c { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + usbh-pen { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + /* Colibri UART-A */ + serial@70006000 { + status = "okay"; + }; + + /* Colibri UART-C */ + serial@70006040 { + status = "okay"; + }; + + /* Colibri UART-B */ + serial@70006300 { + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + /* + * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <400000>; + + /* M41T0M6 real time clock on carrier board */ + rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; + }; + + /* GEN2_I2C: unused */ + + /* CAM_I2C (I2C3): unused */ + + /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */ + i2c@7000c400 { + status = "okay"; + }; + + /* EHCI instance 0: USB1_DP/N -> USBC_P/N */ + usb@c5000000 { + status = "okay"; + dr_mode = "otg"; + }; + + usb-phy@c5000000 { + status = "okay"; + vbus-supply = <®_usbc_vbus>; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH_P/N */ + usb@c5008000 { + status = "okay"; + }; + + usb-phy@c5008000 { + status = "okay"; + vbus-supply = <®_usbh_vbus>; + }; + + /* SPI4: Colibri SSP */ + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + + can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio>; + /* CAN_INT */ + interrupts = <TEGRA_GPIO(A, 0) IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <10000000>; + vdd-supply = <®_3v3>; + xceiver-supply = <®_5v0>; + }; + }; + + /* SD/MMC */ + sdhci@c8000600 { + status = "okay"; + bus-width = <4>; + cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */ + no-1-8-v; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <255 128 64 32 16 8 4 0>; + default-brightness-level = <6>; + /* BL_ON */ + enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + pwms = <&pwm 0 5000000>; /* PWM<A> */ + }; + + clk16m: osc3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + wakeup { + label = "SODIMM pin 45 wakeup"; + gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu", "simple-panel"; + backlight = <&backlight>; + power-supply = <®_3v3>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbc_vbus: regulator-usbc-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USB5"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5v0>; + }; + + /* USBH_PEN resp. USB_P_EN */ + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; +}; diff --git a/dts/src/arm/tegra20-colibri-iris.dts b/dts/src/arm/tegra20-colibri-iris.dts index 57f16c0e99..d8004d68ef 100644 --- a/dts/src/arm/tegra20-colibri-iris.dts +++ b/dts/src/arm/tegra20-colibri-iris.dts @@ -1,15 +1,21 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra20-colibri.dtsi" / { - model = "Toradex Colibri T20 256/512 MB on Iris"; - compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20"; + model = "Toradex Colibri T20 on Iris"; + compatible = "toradex,colibri_t20-iris", "toradex,colibri_t20", + "nvidia,tegra20"; aliases { + rtc0 = "/i2c@7000c000/rtc@68"; + rtc1 = "/i2c@7000d000/pmic@34"; + rtc2 = "/rtc@7000e000"; serial0 = &uarta; serial1 = &uartd; + serial2 = &uartb; }; chosen { @@ -17,90 +23,222 @@ }; host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + nvidia,panel = <&panel>; + }; + }; + hdmi@54280000 { status = "okay"; + hdmi-supply = <®_5v0>; }; }; pinmux@70000014 { state_default: pinmux { - hdint { + bl-on { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + ddc { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + hotplug-detect { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + i2c { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + lcd { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + lm1 { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + mmc { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + mmccd { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + pwm-a-b { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + pwm-c-d { + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + ssp { nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - i2cddc { + uart-a { nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - sdio4 { + uart-b { nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - uarta { + uart-c { nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - uartd { + usbh-pen { nvidia,tristate = <TEGRA_PIN_DISABLE>; }; }; }; + /* Colibri UART-A */ serial@70006000 { status = "okay"; }; + /* Colibri UART-C */ + serial@70006040 { + status = "okay"; + }; + + /* Colibri UART-B */ serial@70006300 { status = "okay"; }; - i2c_ddc: i2c@7000c400 { + pwm@7000a000 { + status = "okay"; + }; + + /* + * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <400000>; + + /* M41T0M6 real time clock on carrier board */ + rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; + }; + + /* GEN2_I2C: unused */ + + /* CAM_I2C (I2C3): unused */ + + /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */ + i2c@7000c400 { status = "okay"; }; + /* EHCI instance 0: USB1_DP/N -> USBC_P/N */ usb@c5000000 { status = "okay"; + dr_mode = "otg"; }; usb-phy@c5000000 { status = "okay"; + vbus-supply = <®_usbc_vbus>; }; + /* EHCI instance 2: USB3_DP/N -> USBH_P/N */ usb@c5008000 { status = "okay"; }; usb-phy@c5008000 { status = "okay"; + vbus-supply = <®_usbh_vbus>; + }; + + /* SPI4: Colibri SSP */ + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; }; + /* SD/MMC */ sdhci@c8000600 { status = "okay"; bus-width = <4>; - vmmc-supply = <&vcc_sd_reg>; - vqmmc-supply = <&vcc_sd_reg>; - }; - - regulators { - regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_host_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - regulator-always-on; - gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>; - }; + cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */ + no-1-8-v; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <255 128 64 32 16 8 4 0>; + default-brightness-level = <6>; + /* BL_ON */ + enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + pwms = <&pwm 0 5000000>; /* PWM<A> */ + }; + + gpio-keys { + compatible = "gpio-keys"; - vcc_sd_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; + wakeup { + label = "SODIMM pin 45 wakeup"; + gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; }; }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu", "simple-panel"; + backlight = <&backlight>; + power-supply = <®_3v3>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbc_vbus: regulator-usbc-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USB2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5v0>; + }; + + /* USBH_PEN resp. USB_P_EN */ + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USB1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; }; diff --git a/dts/src/arm/tegra20-colibri.dtsi b/dts/src/arm/tegra20-colibri.dtsi index e7b9ab0990..6162d193e1 100644 --- a/dts/src/arm/tegra20-colibri.dtsi +++ b/dts/src/arm/tegra20-colibri.dtsi @@ -1,15 +1,13 @@ // SPDX-License-Identifier: GPL-2.0 #include "tegra20.dtsi" +/* + * Toradex Colibri T20 Module Device Tree + * Compatible for Revisions Colibri T20 256MB V1.1B, V1.2A; + * Colibri T20 256MB IT V1.2A; Colibri T20 512MB V1.1C, V1.2A; + * Colibri T20 512MB IT V1.2A + */ / { - model = "Toradex Colibri T20 256/512 MB"; - compatible = "toradex,colibri_t20-512", "nvidia,tegra20"; - - aliases { - rtc0 = "/i2c@7000d000/tps6586x@34"; - rtc1 = "/rtc@7000e000"; - }; - memory@0 { /* * Set memory to 256 MB to be safe as this could be used on @@ -21,12 +19,11 @@ host1x@50000000 { hdmi@54280000 { - vdd-supply = <&hdmi_vdd_reg>; - pll-supply = <&hdmi_pll_reg>; - - nvidia,ddc-i2c-bus = <&i2c_ddc>; - nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) - GPIO_ACTIVE_HIGH>; + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + pll-supply = <®_1v8_avdd_hdmi_pll>; + vdd-supply = <®_3v3_avdd_hdmi>; }; }; @@ -35,187 +32,406 @@ pinctrl-0 = <&state_default>; state_default: pinmux { - audio_refclk { + /* Analogue Audio AC97 to WM9712 (On-module) */ + audio-refclk { nvidia,pins = "cdev1"; nvidia,function = "plla_out"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - crt { - nvidia,pins = "crtp"; - nvidia,function = "crt"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - }; dap3 { nvidia,pins = "dap3"; nvidia,function = "dap3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - displaya { - nvidia,pins = "ld0", "ld1", "ld2", "ld3", - "ld4", "ld5", "ld6", "ld7", "ld8", - "ld9", "ld10", "ld11", "ld12", "ld13", - "ld14", "ld15", "ld16", "ld17", - "lhs", "lpw0", "lpw2", "lsc0", - "lsc1", "lsck", "lsda", "lspi", "lvs"; - nvidia,function = "displaya"; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - }; - gpio_dte { - nvidia,pins = "dte"; - nvidia,function = "rsvd1"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - }; - gpio_gmi { - nvidia,pins = "ata", "atc", "atd", "ate", - "dap1", "dap2", "dap4", "gpu", "irrx", - "irtx", "spia", "spib", "spic"; - nvidia,function = "gmi"; + + /* + * AC97_RESET, ULPI_RESET, AC97_INT aka WM9712 GENIRQ + * (All on-module), SODIMM Pin 45 Wakeup + */ + gpio-uac { + nvidia,pins = "uac"; + nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - gpio_pta { + + /* + * Buffer Enables for nPWE and RDnWR (On-module, + * see GPIO hogging further down below) + */ + gpio-pta { nvidia,pins = "pta"; nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - gpio_uac { - nvidia,pins = "uac"; - nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + + /* + * CLK_32K_OUT, CORE_PWR_REQ, CPU_PWR_REQ, PWR_INT_N, + * SYS_CLK_REQ (All on-module) + */ + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - hdint { - nvidia,pins = "hdint"; + + /* + * Colibri Address/Data Bus (GMI) + * Note: spid and spie optionally used for SPI1 + */ + gmi { + nvidia,pins = "atc", "atd", "ate", "dap1", + "dap2", "dap4", "gmd", "gpu", + "irrx", "irtx", "spia", "spib", + "spic", "spid", "spie", "uca", + "ucb"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + /* Further pins may be used as GPIOs */ + gmi-gpio1 { + nvidia,pins = "lpw0", "lsc1", "lsck", "lsda"; nvidia,function = "hdmi"; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - i2c1 { - nvidia,pins = "rm"; - nvidia,function = "i2c1"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + gmi-gpio2 { + nvidia,pins = "lcsn", "ldc", "lm0", "lsdi"; + nvidia,function = "rsvd4"; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - i2c3 { - nvidia,pins = "dtf"; - nvidia,function = "i2c3"; + + /* Colibri BL_ON */ + bl-on { + nvidia,pins = "dta"; + nvidia,function = "rsvd1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - i2cddc { + + /* Colibri Backlight PWM<A>, PWM<B> */ + pwm-a-b { + nvidia,pins = "sdc"; + nvidia,function = "pwm"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri DDC */ + ddc { nvidia,pins = "ddc"; nvidia,function = "i2c2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - i2cp { - nvidia,pins = "i2cp"; - nvidia,function = "i2cp"; + + /* + * Colibri EXT_IO* + * Note: dtf optionally used for I2C3 + */ + ext-io { + nvidia,pins = "dtf", "spdi"; + nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - irda { - nvidia,pins = "uad"; - nvidia,function = "irda"; + + /* + * Colibri Ethernet (On-module) + * ULPI EHCI instance 1 USB2_DP/N -> AX88772B + */ + ulpi { + nvidia,pins = "uaa", "uab", "uda"; + nvidia,function = "ulpi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - nand { - nvidia,pins = "kbca", "kbcc", "kbcd", - "kbce", "kbcf"; - nvidia,function = "nand"; + ulpi-refclk { + nvidia,pins = "cdev2"; + nvidia,function = "pllp_out4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - owc { - nvidia,pins = "owc"; - nvidia,function = "owr"; + + /* Colibri HOTPLUG_DETECT (HDMI) */ + hotplug-detect { + nvidia,pins = "hdint"; + nvidia,function = "hdmi"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri I2C */ + i2c { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - pmc { - nvidia,pins = "pmc"; - nvidia,function = "pwr_on"; - nvidia,tristate = <TEGRA_PIN_DISABLE>; + + /* + * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE + * today's display need DE, disable LCD_M1 + */ + lm1 { + nvidia,pins = "lm1"; + nvidia,function = "rsvd3"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - pwm { - nvidia,pins = "sdb", "sdc", "sdd"; - nvidia,function = "pwm"; + + /* Colibri LCD (L_* resp. LDD<*>) */ + lcd { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", + "ld4", "ld5", "ld6", "ld7", + "ld8", "ld9", "ld10", "ld11", + "ld12", "ld13", "ld14", "ld15", + "ld16", "ld17", "lhs", "lsc0", + "lspi", "lvs"; + nvidia,function = "displaya"; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - sdio4 { - nvidia,pins = "atb", "gma", "gme"; + /* Colibri LCD (Optional 24 BPP Support) */ + lcd-24 { + nvidia,pins = "ldi", "lhp0", "lhp1", "lhp2", + "lpp", "lvp1"; + nvidia,function = "displaya"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri MMC */ + mmc { + nvidia,pins = "atb", "gma"; nvidia,function = "sdio4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - spi1 { - nvidia,pins = "spid", "spie", "spif"; - nvidia,function = "spi1"; + + /* Colibri MMCCD */ + mmccd { + nvidia,pins = "gmb"; + nvidia,function = "gmi_int"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - spi4 { + + /* Colibri MMC (Optional 8-bit) */ + mmc-8bit { + nvidia,pins = "gme"; + nvidia,function = "sdio4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* + * Colibri Parallel Camera (Optional) + * pins multiplexed with others and therefore disabled + * Note: dta used for BL_ON by default + */ + cif-mclk { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + cif { + nvidia,pins = "dtb", "dtc", "dtd"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri PWM<C>, PWM<D> */ + pwm-c-d { + nvidia,pins = "sdb", "sdd"; + nvidia,function = "pwm"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri SSP */ + ssp { nvidia,pins = "slxa", "slxc", "slxd", "slxk"; nvidia,function = "spi4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - uarta { + + /* Colibri UART-A */ + uart-a { nvidia,pins = "sdio1"; nvidia,function = "uarta"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - uartd { + uart-a-dsr { + nvidia,pins = "lpw1"; + nvidia,function = "rsvd3"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + uart-a-dcd { + nvidia,pins = "lpw2"; + nvidia,function = "hdmi"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri UART-B */ + uart-b { nvidia,pins = "gmc"; nvidia,function = "uartd"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - ulpi { - nvidia,pins = "uaa", "uab", "uda"; - nvidia,function = "ulpi"; + + /* Colibri UART-C */ + uart-c { + nvidia,pins = "uad"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri USB_CDET */ + usb-cdet { + nvidia,pins = "spdo"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri USBH_OC */ + usbh-oc { + nvidia,pins = "spih"; + nvidia,function = "spi2_alt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri USBH_PEN */ + usbh-pen { + nvidia,pins = "spig"; + nvidia,function = "spi2_alt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri VGA not supported */ + vga { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* I2C3 (Optional) */ + i2c3 { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* JTAG_RTCK */ + jtag-rtck { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* + * LAN_RESET, LAN_EXT_WAKEUP and LAN_PME + * (All On-module) + */ + gpio-gpv { + nvidia,pins = "gpv"; + nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - ulpi_refclk { - nvidia,pins = "cdev2"; - nvidia,function = "pllp_out4"; + + /* + * LAN_V_BUS, VDD_FAULT, BATT_FAULT, WM9712 PENDOWN + * (All On-module); Colibri CAN_INT + */ + gpio-dte { + nvidia,pins = "dte"; + nvidia,function = "rsvd1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - usb_gpio { - nvidia,pins = "spig", "spih"; - nvidia,function = "spi2_alt"; + + /* NAND (On-module) */ + nand { + nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", + "kbce", "kbcf"; + nvidia,function = "nand"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - vi { - nvidia,pins = "dta", "dtb", "dtc", "dtd"; - nvidia,function = "vi"; + + /* Onewire (Optional) */ + owr { + nvidia,pins = "owc"; + nvidia,function = "owr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; - vi_sc { - nvidia,pins = "csus"; - nvidia,function = "vi_sensor_clk"; + + /* Power I2C (On-module) */ + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* RESET_OUT */ + reset-out { + nvidia,pins = "ata"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* + * SPI1 (Optional) + * Note: spid and spie used for Colibri Address/Data + * Bus (GMI) + */ + spi1 { + nvidia,pins = "spid", "spie", "spif"; + nvidia,function = "spi1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_ENABLE>; }; + + /* + * THERMD_ALERT# (On-module), unlatched I2C address pin + * of LM95245 temperature sensor therefore requires + * disabling for now + */ + lvp0 { + nvidia,pins = "lvp0"; + nvidia,function = "rsvd3"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; }; }; - ac97: ac97@70002000 { + tegra_ac97: ac97@70002000 { status = "okay"; - nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0) - GPIO_ACTIVE_HIGH>; - nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0) - GPIO_ACTIVE_HIGH>; + nvidia,codec-reset-gpio = + <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>; + nvidia,codec-sync-gpio = + <&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + }; + + serial@70006040 { + compatible = "nvidia,tegra20-hsuart"; + }; + + serial@70006300 { + compatible = "nvidia,tegra20-hsuart"; }; nand-controller@70008000 { @@ -243,7 +459,7 @@ }; /* DDC_SCL/SDA on X3 pin 15/16 (e.g. display EDID) */ - i2c_ddc: i2c@7000c400 { + hdmi_ddc: i2c@7000c400 { clock-frequency = <10000>; }; @@ -256,59 +472,45 @@ status = "okay"; clock-frequency = <100000>; - pmic: tps6586x@34 { + pmic@34 { compatible = "ti,tps6586x"; reg = <0x34>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - ti,system-power-controller; - #gpio-cells = <2>; gpio-controller; - - sys-supply = <&vdd_3v3_reg>; - vin-sm0-supply = <&sys_reg>; - vin-sm1-supply = <&sys_reg>; - vin-sm2-supply = <&sys_reg>; - vinldo01-supply = <&sm2_reg>; - vinldo23-supply = <&vdd_3v3_reg>; - vinldo4-supply = <&vdd_3v3_reg>; - vinldo678-supply = <&vdd_3v3_reg>; - vinldo9-supply = <&vdd_3v3_reg>; + sys-supply = <®_module_3v3>; + vin-sm0-supply = <®_3v3_vsys>; + vin-sm1-supply = <®_3v3_vsys>; + vin-sm2-supply = <®_3v3_vsys>; + vinldo01-supply = <®_1v8_vdd_ddr2>; + vinldo23-supply = <®_module_3v3>; + vinldo4-supply = <®_module_3v3>; + vinldo678-supply = <®_module_3v3>; + vinldo9-supply = <®_module_3v3>; regulators { - #address-cells = <1>; - #size-cells = <0>; - - sys_reg: regulator@0 { - reg = <0>; - regulator-compatible = "sys"; - regulator-name = "vdd_sys"; + reg_3v3_vsys: sys { + regulator-name = "VSYS_3.3V"; regulator-always-on; }; - regulator@1 { - reg = <1>; - regulator-compatible = "sm0"; - regulator-name = "vdd_sm0,vdd_core"; + sm0 { + regulator-name = "VDD_CORE_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - regulator@2 { - reg = <2>; - regulator-compatible = "sm1"; - regulator-name = "vdd_sm1,vdd_cpu"; + sm1 { + regulator-name = "VDD_CPU_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - sm2_reg: regulator@3 { - reg = <3>; - regulator-compatible = "sm2"; - regulator-name = "vdd_sm2,vin_ldo*"; + reg_1v8_vdd_ddr2: sm2 { + regulator-name = "VDD_DDR2_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -316,80 +518,68 @@ /* LDO0 is not connected to anything */ - regulator@5 { - reg = <5>; - regulator-compatible = "ldo1"; - regulator-name = "vdd_ldo1,avdd_pll*"; + /* + * +3.3V_ENABLE_N switching via FET: + * AVDD_AUDIO_S and +3.3V + * see also +3.3V fixed supply + */ + ldo1 { + regulator-name = "AVDD_PLL_1.1V"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; }; - regulator@6 { - reg = <6>; - regulator-compatible = "ldo2"; - regulator-name = "vdd_ldo2,vdd_rtc"; + ldo2 { + regulator-name = "VDD_RTC_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; /* LDO3 is not connected to anything */ - regulator@8 { - reg = <8>; - regulator-compatible = "ldo4"; - regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + ldo4 { + regulator-name = "VDDIO_SYS_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - ldo5_reg: regulator@9 { - reg = <9>; - regulator-compatible = "ldo5"; - regulator-name = "vdd_ldo5,vdd_fuse"; + /* Switched via FET from regular +3.3V */ + ldo5 { + regulator-name = "+3.3V_USB"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - regulator@10 { - reg = <10>; - regulator-compatible = "ldo6"; - regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam"; + ldo6 { + regulator-name = "AVDD_VDAC_2.85V"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; }; - hdmi_vdd_reg: regulator@11 { - reg = <11>; - regulator-compatible = "ldo7"; - regulator-name = "vdd_ldo7,avdd_hdmi"; + reg_3v3_avdd_hdmi: ldo7 { + regulator-name = "AVDD_HDMI_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - hdmi_pll_reg: regulator@12 { - reg = <12>; - regulator-compatible = "ldo8"; - regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + reg_1v8_avdd_hdmi_pll: ldo8 { + regulator-name = "AVDD_HDMI_PLL_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - regulator@13 { - reg = <13>; - regulator-compatible = "ldo9"; - regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; + ldo9 { + regulator-name = "VDDIO_RX_DDR_2.85V"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; regulator-always-on; }; - regulator@14 { - reg = <14>; - regulator-compatible = "ldo_rtc"; - regulator-name = "vdd_rtc_out,vdd_cell"; + ldo_rtc { + regulator-name = "VCC_BATT"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -397,7 +587,8 @@ }; }; - temperature-sensor@4c { + /* LM95245 temperature sensor */ + temp-sensor@4c { compatible = "national,lm95245"; reg = <0x4c>; }; @@ -410,6 +601,14 @@ nvidia,core-pwr-good-time = <3845 3845>; nvidia,core-pwr-off-time = <3875>; nvidia,sys-clock-req-active-high; + + /* Set SLEEP MODE bit in SUPPLYENE register of TPS658643 PMIC */ + i2c-thermtrip { + nvidia,i2c-controller-id = <3>; + nvidia,bus-addr = <0x34>; + nvidia,reg-addr = <0x14>; + nvidia,reg-data = <0x8>; + }; }; memory-controller@7000f400 { @@ -483,79 +682,87 @@ }; }; + /* EHCI instance 1: ULPI PHY -> AX88772B (On-module) */ usb@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) - GPIO_ACTIVE_LOW>; + #address-cells = <1>; + #size-cells = <0>; + + asix@1 { + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; + }; }; usb-phy@c5004000 { status = "okay"; - nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) - GPIO_ACTIVE_LOW>; + nvidia,phy-reset-gpio = + <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; + vbus-supply = <®_lan_v_bus>; }; - sdhci@c8000600 { - cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; + clk32k_in: xtal3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + reg_lan_v_bus: regulator-lan-v-bus { + compatible = "regulator-fixed"; + regulator-name = "LAN_V_BUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - vdd_3v3_reg: regulator@100 { - compatible = "regulator-fixed"; - reg = <100>; - regulator-name = "vdd_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - regulator@101 { - compatible = "regulator-fixed"; - reg = <101>; - regulator-name = "internal_usb"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-boot-on; - regulator-always-on; - gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>; - }; + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound { compatible = "nvidia,tegra-audio-wm9712-colibri_t20", - "nvidia,tegra-audio-wm9712"; - nvidia,model = "Colibri T20 AC97 Audio"; - + "nvidia,tegra-audio-wm9712"; + nvidia,model = "Toradex Colibri T20"; nvidia,audio-routing = "Headphone", "HPOUTL", "Headphone", "HPOUTR", "LineIn", "LINEINL", "LineIn", "LINEINR", "Mic", "MIC1"; - - nvidia,ac97-controller = <&ac97>; - + nvidia,ac97-controller = <&tegra_ac97>; clocks = <&tegra_car TEGRA20_CLK_PLL_A>, <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; + +&gpio { + lan-reset-n { + gpio-hog; + gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LAN_RESET#"; + }; + + /* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */ + npwe { + gpio-hog; + gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "Tri-state nPWE"; + }; + + /* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */ + rdnwr { + gpio-hog; + gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "Not tri-state RDnWR"; + }; +}; diff --git a/dts/src/arm/tegra20-paz00.dts b/dts/src/arm/tegra20-paz00.dts index ef24529192..8861e0976e 100644 --- a/dts/src/arm/tegra20-paz00.dts +++ b/dts/src/arm/tegra20-paz00.dts @@ -303,7 +303,7 @@ request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; slave-addr = <138>; clocks = <&tegra_car TEGRA20_CLK_I2C3>, - <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; resets = <&tegra_car 67>; reset-names = "i2c"; @@ -524,10 +524,10 @@ gpio-keys { compatible = "gpio-keys"; - power { - label = "Power"; + wakeup { + label = "Wakeup"; gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; + linux,code = <KEY_WAKEUP>; wakeup-source; }; }; @@ -599,8 +599,8 @@ GPIO_ACTIVE_HIGH>; clocks = <&tegra_car TEGRA20_CLK_PLL_A>, - <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA20_CLK_CDEV1>; + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/dts/src/arm/tegra20.dtsi b/dts/src/arm/tegra20.dtsi index 15b73bd377..20869757d3 100644 --- a/dts/src/arm/tegra20.dtsi +++ b/dts/src/arm/tegra20.dtsi @@ -419,19 +419,6 @@ status = "disabled"; }; - gmi@70009000 { - compatible = "nvidia,tegra20-gmi"; - reg = <0x70009000 0x1000>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0xd0000000 0xfffffff>; - clocks = <&tegra_car TEGRA20_CLK_NOR>; - clock-names = "gmi"; - resets = <&tegra_car 42>; - reset-names = "gmi"; - status = "disabled"; - }; - nand-controller@70008000 { compatible = "nvidia,tegra20-nand"; reg = <0x70008000 0x100>; @@ -447,6 +434,19 @@ status = "disabled"; }; + gmi@70009000 { + compatible = "nvidia,tegra20-gmi"; + reg = <0x70009000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xd0000000 0xfffffff>; + clocks = <&tegra_car TEGRA20_CLK_NOR>; + clock-names = "gmi"; + resets = <&tegra_car 42>; + reset-names = "gmi"; + status = "disabled"; + }; + pwm: pwm@7000a000 { compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; @@ -865,5 +865,7 @@ compatible = "arm,cortex-a9-pmu"; interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&{/cpus/cpu@0}>, + <&{/cpus/cpu@1}>; }; }; diff --git a/dts/src/arm/tegra30-apalis-eval.dts b/dts/src/arm/tegra30-apalis-eval.dts index 0dc85a20bd..749fc6d1ff 100644 --- a/dts/src/arm/tegra30-apalis-eval.dts +++ b/dts/src/arm/tegra30-apalis-eval.dts @@ -6,11 +6,12 @@ / { model = "Toradex Apalis T30 on Apalis Evaluation Board"; - compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30", "nvidia,tegra30"; + compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30", + "nvidia,tegra30"; aliases { rtc0 = "/i2c@7000c000/rtc@68"; - rtc1 = "/i2c@7000d000/tps65911@2d"; + rtc1 = "/i2c@7000d000/pmic@2d"; rtc2 = "/rtc@7000e000"; serial0 = &uarta; serial1 = &uartb; @@ -23,8 +24,6 @@ }; pcie@3000 { - status = "okay"; - pci@1,0 { status = "okay"; }; @@ -32,10 +31,6 @@ pci@2,0 { status = "okay"; }; - - pci@3,0 { - status = "okay"; - }; }; host1x@50000000 { @@ -45,27 +40,30 @@ nvidia,panel = <&panel>; }; }; + hdmi@54280000 { status = "okay"; + hdmi-supply = <®_5v0>; }; }; + /* Apalis UART1 */ serial@70006000 { status = "okay"; }; + /* Apalis UART2 */ serial@70006040 { - compatible = "nvidia,tegra30-hsuart"; status = "okay"; }; + /* Apalis UART3 */ serial@70006200 { - compatible = "nvidia,tegra30-hsuart"; status = "okay"; }; + /* Apalis UART4 */ serial@70006300 { - compatible = "nvidia,tegra30-hsuart"; status = "okay"; }; @@ -99,13 +97,13 @@ * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on * carrier board) */ - cami2c: i2c@7000c500 { + i2c@7000c500 { status = "okay"; clock-frequency = <400000>; }; /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */ - hdmiddc: i2c@7000c700 { + i2c@7000c700 { status = "okay"; }; @@ -113,29 +111,16 @@ spi@7000d400 { status = "okay"; spi-max-frequency = <25000000>; - spidev0: spidev@1 { - compatible = "spidev"; - reg = <1>; - spi-max-frequency = <25000000>; - }; }; /* SPI5: Apalis SPI2 */ spi@7000dc00 { status = "okay"; spi-max-frequency = <25000000>; - spidev1: spidev@2 { - compatible = "spidev"; - reg = <2>; - spi-max-frequency = <25000000>; - }; - }; - - hda@70030000 { - status = "okay"; }; - sd1: sdhci@78000000 { + /* Apalis SD1 */ + sdhci@78000000 { status = "okay"; bus-width = <4>; /* SD1_CD# */ @@ -143,7 +128,8 @@ no-1-8-v; }; - mmc1: sdhci@78000400 { + /* Apalis MMC1 */ + sdhci@78000400 { status = "okay"; bus-width = <8>; /* MMC1_CD# */ @@ -154,12 +140,12 @@ /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ usb@7d000000 { status = "okay"; + dr_mode = "otg"; }; usb-phy@7d000000 { status = "okay"; - dr_mode = "otg"; - vbus-supply = <&usbo1_vbus_reg>; + vbus-supply = <®_usbo1_vbus>; }; /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ @@ -169,7 +155,7 @@ usb-phy@7d004000 { status = "okay"; - vbus-supply = <&usbh_vbus_reg>; + vbus-supply = <®_usbh_vbus>; }; /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ @@ -179,18 +165,17 @@ usb-phy@7d008000 { status = "okay"; - vbus-supply = <&usbh_vbus_reg>; + vbus-supply = <®_usbh_vbus>; }; backlight: backlight { compatible = "pwm-backlight"; - - /* PWM_BKL1 */ - pwms = <&pwm 0 5000000>; brightness-levels = <255 231 223 207 191 159 127 0>; default-brightness-level = <6>; /* BKL1_ON */ enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + pwms = <&pwm 0 5000000>; /* BKL1_PWM */ }; gpio-keys { @@ -211,64 +196,53 @@ * edt,et070080dh6: EDT 7.0" LCD TFT */ compatible = "edt,et057090dhu", "simple-panel"; - backlight = <&backlight>; + power-supply = <®_3v3>; }; - pwmleds { - compatible = "pwm-leds"; - - pwm1 { - label = "PWM1"; - pwms = <&pwm 3 19600>; - max-brightness = <255>; - }; - - pwm2 { - label = "PWM2"; - pwms = <&pwm 2 19600>; - max-brightness = <255>; - }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; - pwm3 { - label = "PWM3"; - pwms = <&pwm 1 19600>; - max-brightness = <255>; - }; + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; }; - regulators { - sys_5v0_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + /* USBO1_EN */ + reg_usbo1_vbus: regulator-usbo1-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USBO1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_5v0>; + }; - /* USBO1_EN */ - usbo1_vbus_reg: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usbo1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&sys_5v0_reg>; - }; + /* USBH_EN */ + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USBH(2A|2C|2D|3|4)"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_5v0>; + }; +}; - /* USBH_EN */ - usbh_vbus_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "usbh_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; - enable-active-high; - vin-supply = <&sys_5v0_reg>; - }; +&gpio { + /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */ + pex-perst-n { + gpio-hog; + gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PEX_PERST_N"; }; }; diff --git a/dts/src/arm/tegra30-apalis-v1.1-eval.dts b/dts/src/arm/tegra30-apalis-v1.1-eval.dts new file mode 100644 index 0000000000..0be50e8816 --- /dev/null +++ b/dts/src/arm/tegra30-apalis-v1.1-eval.dts @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra30-apalis-v1.1.dtsi" + +/ { + model = "Toradex Apalis T30 on Apalis Evaluation Board"; + compatible = "toradex,apalis_t30-v1.1-eval", "toradex,apalis_t30-eval", + "toradex,apalis_t30-v1.1", "toradex,apalis_t30", + "nvidia,tegra30"; + + aliases { + rtc0 = "/i2c@7000c000/rtc@68"; + rtc1 = "/i2c@7000d000/pmic@2d"; + rtc2 = "/rtc@7000e000"; + serial0 = &uarta; + serial1 = &uartb; + serial2 = &uartc; + serial3 = &uartd; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + pcie@3000 { + pci@1,0 { + status = "okay"; + }; + + pci@2,0 { + status = "okay"; + }; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + nvidia,panel = <&panel>; + }; + }; + + hdmi@54280000 { + status = "okay"; + hdmi-supply = <®_5v0>; + }; + }; + + /* Apalis UART1 */ + serial@70006000 { + status = "okay"; + }; + + /* Apalis UART2 */ + serial@70006040 { + status = "okay"; + }; + + /* Apalis UART3 */ + serial@70006200 { + status = "okay"; + }; + + /* Apalis UART4 */ + serial@70006300 { + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + /* + * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <400000>; + + pcie-switch@58 { + compatible = "plx,pex8605"; + reg = <0x58>; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc@68 { + compatible = "st,m41t0"; + reg = <0x68>; + }; + }; + + /* GEN2_I2C: unused */ + + /* + * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on + * carrier board) + */ + i2c@7000c500 { + status = "okay"; + clock-frequency = <400000>; + }; + + /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */ + i2c@7000c700 { + status = "okay"; + }; + + /* SPI1: Apalis SPI1 */ + spi@7000d400 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + /* SPI5: Apalis SPI2 */ + spi@7000dc00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + /* Apalis SD1 */ + sdhci@78000000 { + status = "okay"; + bus-width = <4>; + /* SD1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>; + no-1-8-v; + }; + + /* Apalis MMC1 */ + sdhci@78000400 { + status = "okay"; + bus-width = <8>; + /* MMC1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; + vqmmc-supply = <®_vddio_sdmmc3>; + }; + + /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ + usb@7d000000 { + status = "okay"; + dr_mode = "otg"; + }; + + usb-phy@7d000000 { + status = "okay"; + vbus-supply = <®_usbo1_vbus>; + }; + + /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ + usb@7d004000 { + status = "okay"; + }; + + usb-phy@7d004000 { + status = "okay"; + vbus-supply = <®_usbh_vbus>; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + vbus-supply = <®_usbh_vbus>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = <255 231 223 207 191 159 127 0>; + default-brightness-level = <6>; + /* BKL1_ON */ + enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + pwms = <&pwm 0 5000000>; /* BKL1_PWM */ + }; + + gpio-keys { + compatible = "gpio-keys"; + + wakeup { + label = "WAKE1_MICO"; + gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu", "simple-panel"; + backlight = <&backlight>; + power-supply = <®_3v3>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* USBO1_EN */ + reg_usbo1_vbus: regulator-usbo1-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USBO1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_5v0>; + }; + + /* USBH_EN */ + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USBH(2A|2C|2D|3|4)"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_5v0>; + }; + + /* + * 1.8 volt resp. 3.3 volt VDDIO_SDMMC3 depending on + * EN_+3.3_SDMMC3 GPIO + */ + reg_vddio_sdmmc3: regulator-vddio-sdmmc3 { + compatible = "regulator-gpio"; + regulator-name = "VDDIO_SDMMC3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-type = "voltage"; + gpios = <&gpio TEGRA_GPIO(J, 5) GPIO_ACTIVE_HIGH>; + states = <1800000 0x0 + 3300000 0x1>; + startup-delay-us = <100000>; + vin-supply = <&vddio_sdmmc_1v8_reg>; + }; +}; + +&gpio { + /* Apalis GPIO7 MXM3 pin 15 PLX PEX 8605 PCIe Switch Reset */ + pex-perst-n { + gpio-hog; + gpios = <TEGRA_GPIO(S, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PEX_PERST_N"; + }; +}; diff --git a/dts/src/arm/tegra30-apalis-v1.1.dtsi b/dts/src/arm/tegra30-apalis-v1.1.dtsi new file mode 100644 index 0000000000..02f8126481 --- /dev/null +++ b/dts/src/arm/tegra30-apalis-v1.1.dtsi @@ -0,0 +1,1189 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT +#include "tegra30.dtsi" + +/* + * Toradex Apalis T30 Module Device Tree + * Compatible for Revisions 1GB: V1.1A, V1.1B; 1GB IT: V1.1A, V1.1B; + * 2GB: V1.1A, V1.1B + */ +/ { + memory@80000000 { + reg = <0x80000000 0x40000000>; + }; + + pcie@3000 { + status = "okay"; + avdd-pexa-supply = <&vdd2_reg>; + avdd-pexb-supply = <&vdd2_reg>; + avdd-pex-pll-supply = <&vdd2_reg>; + avdd-plle-supply = <&ldo6_reg>; + hvdd-pex-supply = <®_module_3v3>; + vddio-pex-ctl-supply = <®_module_3v3>; + vdd-pexa-supply = <&vdd2_reg>; + vdd-pexb-supply = <&vdd2_reg>; + + /* Apalis type specific */ + pci@1,0 { + nvidia,num-lanes = <4>; + }; + + /* Apalis PCIe */ + pci@2,0 { + nvidia,num-lanes = <1>; + }; + + /* I210/I211 Gigabit Ethernet Controller (on-module) */ + pci@3,0 { + status = "okay"; + nvidia,num-lanes = <1>; + + pcie@0 { + reg = <0 0 0 0 0>; + local-mac-address = [00 00 00 00 00 00]; + }; + }; + }; + + host1x@50000000 { + hdmi@54280000 { + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + pll-supply = <®_1v8_avdd_hdmi_pll>; + vdd-supply = <®_3v3_avdd_hdmi>; + }; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* Analogue Audio (On-module) */ + clk1-out-pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3-fs-pp0 { + nvidia,pins = "dap3_fs_pp0", + "dap3_sclk_pp3", + "dap3_din_pp1", + "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis BKL1_ON */ + pv2 { + nvidia,pins = "pv2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis BKL1_PWM */ + uart3-rts-n-pc0 { + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */ + uart3-cts-n-pa1 { + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis CAN1 on SPI6 */ + spi2-cs0-n-px3 { + nvidia,pins = "spi2_cs0_n_px3", + "spi2_miso_px1", + "spi2_mosi_px0", + "spi2_sck_px2"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* CAN_INT1 */ + spi2-cs1-n-pw2 { + nvidia,pins = "spi2_cs1_n_pw2"; + nvidia,function = "spi3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis CAN2 on SPI4 */ + gmi-a16-pj7 { + nvidia,pins = "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* CAN_INT2 */ + spi2-cs2-n-pw3 { + nvidia,pins = "spi2_cs2_n_pw3"; + nvidia,function = "spi3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis Digital Audio */ + clk1-req-pee2 { + nvidia,pins = "clk1_req_pee2"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + clk2-out-pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1-fs-pn0 { + nvidia,pins = "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis GPIO */ + kb-col0-pq0 { + nvidia,pins = "kb_col0_pq0", + "kb_col1_pq1", + "kb_row10_ps2", + "kb_row11_ps3", + "kb_row12_ps4", + "kb_row13_ps5", + "kb_row14_ps6", + "kb_row15_ps7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Multiplexed and therefore disabled */ + owr { + nvidia,pins = "owr"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis HDMI1 */ + hdmi-cec-pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi-int-pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "hdmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C1 */ + gen1-i2c-scl-pc4 { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C2 (DDC) */ + ddc-scl-pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C3 (CAM) */ + cam-i2c-scl-pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis LCD1 */ + lcd-d0-pe0 { + nvidia,pins = "lcd_d0_pe0", + "lcd_d1_pe1", + "lcd_d2_pe2", + "lcd_d3_pe3", + "lcd_d4_pe4", + "lcd_d5_pe5", + "lcd_d6_pe6", + "lcd_d7_pe7", + "lcd_d8_pf0", + "lcd_d9_pf1", + "lcd_d10_pf2", + "lcd_d11_pf3", + "lcd_d12_pf4", + "lcd_d13_pf5", + "lcd_d14_pf6", + "lcd_d15_pf7", + "lcd_d16_pm0", + "lcd_d17_pm1", + "lcd_d18_pm2", + "lcd_d19_pm3", + "lcd_d20_pm4", + "lcd_d21_pm5", + "lcd_d22_pm6", + "lcd_d23_pm7", + "lcd_de_pj1", + "lcd_hsync_pj3", + "lcd_pclk_pb3", + "lcd_vsync_pj4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis MMC1 */ + sdmmc3-clk-pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3-dat0-pb7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_dat4_pd1", + "sdmmc3_dat5_pd0", + "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* Apalis MMC1_CD# */ + pv3 { + nvidia,pins = "pv3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis Parallel Camera */ + cam-mclk-pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi-vsync-pd6 { + nvidia,pins = "vi_d0_pt4", + "vi_d1_pd5", + "vi_d2_pl0", + "vi_d3_pl1", + "vi_d4_pl2", + "vi_d5_pl3", + "vi_d6_pl4", + "vi_d7_pl5", + "vi_d8_pl6", + "vi_d9_pl7", + "vi_d10_pt2", + "vi_d11_pt3", + "vi_hsync_pd7", + "vi_pclk_pt0", + "vi_vsync_pd6"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Multiplexed and therefore disabled */ + kb-col2-pq2 { + nvidia,pins = "kb_col2_pq2", + "kb_col3_pq3", + "kb_col4_pq4", + "kb_row4_pr4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb-row0-pr0 { + nvidia,pins = "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2", + "kb_row3_pr3"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb-row5-pr5 { + nvidia,pins = "kb_row5_pr5", + "kb_row6_pr6", + "kb_row7_pr7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* + * VI level-shifter direction + * (pull-down => default direction input) + */ + vi-mclk-pt1 { + nvidia,pins = "vi_mclk_pt1"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis PWM1 */ + pu6 { + nvidia,pins = "pu6"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis PWM2 */ + pu5 { + nvidia,pins = "pu5"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis PWM3 */ + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis PWM4 */ + pu3 { + nvidia,pins = "pu3"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis RESET_MOCI# */ + gmi-rst-n-pi4 { + nvidia,pins = "gmi_rst_n_pi4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SATA1_ACT# */ + pex-l0-prsnt-n-pdd0 { + nvidia,pins = "pex_l0_prsnt_n_pdd0"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SD1 */ + sdmmc1-clk-pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc1-cmd-pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* Apalis SD1_CD# */ + clk2-req-pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis SPDIF1 */ + spdif-out-pk5 { + nvidia,pins = "spdif_out_pk5", + "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis SPI1 */ + spi1-sck-px5 { + nvidia,pins = "spi1_sck_px5", + "spi1_mosi_px4", + "spi1_miso_px7", + "spi1_cs0_n_px6"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SPI2 */ + lcd-sck-pz4 { + nvidia,pins = "lcd_sck_pz4", + "lcd_sdout_pn5", + "lcd_sdin_pz2", + "lcd_cs0_n_pn4"; + nvidia,function = "spi5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* + * Apalis TS (Low-speed type specific) + * pins may be used as GPIOs + */ + kb-col5-pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb-col6-pq6 { + nvidia,pins = "kb_col6_pq6", + "kb_col7_pq7", + "kb_row8_ps0", + "kb_row9_ps1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis UART1 */ + ulpi-data0 { + nvidia,pins = "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART2 */ + ulpi-clk-py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART3 */ + uart2-rxd-pc3 { + nvidia,pins = "uart2_rxd_pc3", + "uart2_txd_pc2"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART4 */ + uart3-rxd-pw7 { + nvidia,pins = "uart3_rxd_pw7", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBH_EN */ + pex-l0-rst-n-pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBH_OC# */ + pex-l0-clkreq-n-pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis USBO1_EN */ + gen2-i2c-scl-pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "rsvd4"; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBO1_OC# */ + gen2-i2c-sda-pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "rsvd4"; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis VGA1 not supported and therefore disabled */ + crt-hsync-pv6 { + nvidia,pins = "crt_hsync_pv6", + "crt_vsync_pv7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis WAKE1_MICO */ + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* eMMC (On-module) */ + sdmmc4-clk-pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_cmd_pt7", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4-dat0-paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* EN_+3.3_SDMMC3 */ + uart2-cts-n-pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* LAN i210/i211 DEV_OFF_N, PE_RST_N (On-module) */ + pex-l2-prsnt-n-pdd7 { + nvidia,pins = "pex_l2_prsnt_n_pdd7", + "pex_l2_rst_n_pcc6"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* LAN i210/i211 PE_WAKE_N, SDP3 (On-module) */ + pex-wake-n-pdd3 { + nvidia,pins = "pex_wake_n_pdd3", + "pex_l2_clkreq_n_pcc7"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* LAN i210/i211 SMB_ALERT_N (On-module) */ + sys-clk-req-pz5 { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* LVDS Transceiver Configuration */ + pbb0 { + nvidia,pins = "pbb0", + "pbb7", + "pcc1", + "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb3 { + nvidia,pins = "pbb3", + "pbb4", + "pbb5", + "pbb6"; + nvidia,function = "displayb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Not connected and therefore disabled */ + clk-32k-out-pa0 { + nvidia,pins = "clk3_out_pee0", + "clk3_req_pee1", + "clk_32k_out_pa0", + "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_fs_pp4", + "dap4_sclk_pp7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap2-fs-pa2 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5", + "lcd_dc0_pn6", + "lcd_m1_pw1", + "lcd_pwr1_pc1", + "pex_l1_clkreq_n_pdd6", + "pex_l1_prsnt_n_pdd4", + "pex_l1_rst_n_pdd5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-ad0-pg0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad2_pg2", + "gmi_ad3_pg3", + "gmi_ad4_pg4", + "gmi_ad5_pg5", + "gmi_ad6_pg6", + "gmi_ad7_pg7", + "gmi_ad8_ph0", + "gmi_ad9_ph1", + "gmi_ad10_ph2", + "gmi_ad11_ph3", + "gmi_ad12_ph4", + "gmi_ad13_ph5", + "gmi_ad14_ph6", + "gmi_ad15_ph7", + "gmi_adv_n_pk0", + "gmi_clk_pk1", + "gmi_cs4_n_pk2", + "gmi_cs2_n_pk3", + "gmi_dqs_pi2", + "gmi_iordy_pi5", + "gmi_oe_n_pi1", + "gmi_wait_pi7", + "gmi_wr_n_pi0", + "lcd_cs1_n_pw0", + "pu0", + "pu1", + "pu2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-cs0-n-pj0 { + nvidia,pins = "gmi_cs0_n_pj0", + "gmi_cs1_n_pj2", + "gmi_cs3_n_pk4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-cs6-n-pi3 { + nvidia,pins = "gmi_cs6_n_pi3"; + nvidia,function = "sata"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-cs7-n-pi6 { + nvidia,pins = "gmi_cs7_n_pi6"; + nvidia,function = "gmi_alt"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd-pwr0-pb2 { + nvidia,pins = "lcd_pwr0_pb2", + "lcd_pwr2_pc6", + "lcd_wr_n_pz3"; + nvidia,function = "hdcp"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2-rts-n-pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Power I2C (On-module) */ + pwr-i2c-scl-pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* + * THERMD_ALERT#, unlatched I2C address pin of LM95245 + * temperature sensor therefore requires disabling for + * now + */ + lcd-dc1-pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* TOUCH_PEN_INT# (On-module) */ + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + }; + }; + + serial@70006040 { + compatible = "nvidia,tegra30-hsuart"; + }; + + serial@70006200 { + compatible = "nvidia,tegra30-hsuart"; + }; + + serial@70006300 { + compatible = "nvidia,tegra30-hsuart"; + }; + + hdmi_ddc: i2c@7000c700 { + clock-frequency = <10000>; + }; + + /* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + /* SGTL5000 audio codec */ + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_module_3v3_audio>; + VDDD-supply = <®_1v8_vio>; + VDDIO-supply = <®_module_3v3>; + clocks = <&tegra_car TEGRA30_CLK_EXTERN1>; + }; + + pmic: pmic@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <®_module_3v3>; + vcc2-supply = <®_module_3v3>; + vcc3-supply = <®_1v8_vio>; + vcc4-supply = <®_module_3v3>; + vcc5-supply = <®_module_3v3>; + vcc6-supply = <®_1v8_vio>; + vcc7-supply = <®_5v0_charge_pump>; + vccio-supply = <®_module_3v3>; + + regulators { + vdd1_reg: vdd1 { + regulator-name = "+V1.35_VDDIO_DDR"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vdd2_reg: vdd2 { + regulator-name = "+V1.05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + vddctrl_reg: vddctrl { + regulator-name = "+V1.0_VDD_CPU"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + }; + + reg_1v8_vio: vio { + regulator-name = "+V1.8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* + * 1.8 volt +VDDIO_SDMMC3 in case EN_+3.3_SDMMC3 + * is off + */ + vddio_sdmmc_1v8_reg: ldo1 { + regulator-name = "+VDDIO_SDMMC3_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* + * EN_+V3.3 switching via FET: + * +V3.3_AUDIO_AVDD_S, +V3.3 + * see also +V3.3 fixed supply + */ + ldo2_reg: ldo2 { + regulator-name = "EN_+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "+V1.2_CSI"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo4_reg: ldo4 { + regulator-name = "+V1.2_VDD_RTC"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* + * +V2.8_AVDD_VDAC: + * only required for (unsupported) analog RGB + */ + ldo5_reg: ldo5 { + regulator-name = "+V2.8_AVDD_VDAC"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + /* + * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V + * but LDO6 can't set voltage in 50mV + * granularity + */ + ldo6_reg: ldo6 { + regulator-name = "+V1.05_AVDD_PLLE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + ldo7_reg: ldo7 { + regulator-name = "+V1.2_AVDD_PLL"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo8_reg: ldo8 { + regulator-name = "+V1.0_VDD_DDR_HS"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + + /* STMPE811 touch screen controller */ + touchscreen@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; + + /* + * LM95245 temperature sensor + * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN + */ + temp-sensor@4c { + compatible = "national,lm95245"; + reg = <0x4c>; + }; + + /* SW: +V1.2_VDD_CORE */ + regulator@60 { + compatible = "ti,tps62362"; + reg = <0x60>; + + regulator-name = "tps62362-vout"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-low; + /* VSEL1: EN_CORE_DVFS_N low for DVFS */ + ti,vsel1-state-low; + }; + }; + + /* SPI4: CAN2 */ + spi@7000da00 { + status = "okay"; + spi-max-frequency = <10000000>; + + can@1 { + compatible = "microchip,mcp2515"; + reg = <1>; + clocks = <&clk16m>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <10000000>; + }; + }; + + /* SPI6: CAN1 */ + spi@7000de00 { + status = "okay"; + spi-max-frequency = <10000000>; + + can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <10000000>; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + + /* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */ + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x2d>; + nvidia,reg-addr = <0x3f>; + nvidia,reg-data = <0x1>; + }; + }; + + hda@70030000 { + status = "okay"; + }; + + ahub@70080000 { + i2s@70080500 { + status = "okay"; + }; + }; + + /* eMMC */ + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + vmmc-supply = <®_module_3v3>; /* VCC */ + vqmmc-supply = <®_1v8_vio>; /* VCCQ */ + mmc-ddr-1_8v; + }; + + clk32k_in: xtal1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + clk16m: osc4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + }; + + reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll { + compatible = "regulator-fixed"; + regulator-name = "+V1.8_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_1v8_vio>; + }; + + reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_module_3v3>; + }; + + reg_5v0_charge_pump: regulator-5v0-charge-pump { + compatible = "regulator-fixed"; + regulator-name = "+V5.0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_module_3v3_audio: regulator-module-3v3-audio { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AUDIO_AVDD_S"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sound { + compatible = "toradex,tegra-audio-sgtl5000-apalis_t30", + "nvidia,tegra-audio-sgtl5000"; + nvidia,model = "Toradex Apalis T30"; + nvidia,audio-routing = + "Headphone Jack", "HP_OUT", + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack"; + nvidia,i2s-controller = <&tegra_i2s2>; + nvidia,audio-codec = <&sgtl5000>; + clocks = <&tegra_car TEGRA30_CLK_PLL_A>, + <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; +}; diff --git a/dts/src/arm/tegra30-apalis.dtsi b/dts/src/arm/tegra30-apalis.dtsi index 2f807d40c1..7f112f192f 100644 --- a/dts/src/arm/tegra30-apalis.dtsi +++ b/dts/src/arm/tegra30-apalis.dtsi @@ -3,48 +3,53 @@ /* * Toradex Apalis T30 Module Device Tree - * Compatible for Revisions 1GB: V1.0A, V1.1A; 1GB IT: V1.1A; - * 2GB: V1.0B, V1.0C, V1.0E, V1.1A + * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C, V1.0E */ / { - model = "Toradex Apalis T30"; - compatible = "toradex,apalis_t30", "nvidia,tegra30"; - memory@80000000 { reg = <0x80000000 0x40000000>; }; pcie@3000 { + status = "okay"; avdd-pexa-supply = <&vdd2_reg>; - vdd-pexa-supply = <&vdd2_reg>; avdd-pexb-supply = <&vdd2_reg>; - vdd-pexb-supply = <&vdd2_reg>; avdd-pex-pll-supply = <&vdd2_reg>; avdd-plle-supply = <&ldo6_reg>; - vddio-pex-ctl-supply = <&sys_3v3_reg>; - hvdd-pex-supply = <&sys_3v3_reg>; + hvdd-pex-supply = <®_module_3v3>; + vddio-pex-ctl-supply = <®_module_3v3>; + vdd-pexa-supply = <&vdd2_reg>; + vdd-pexb-supply = <&vdd2_reg>; + /* Apalis type specific */ pci@1,0 { nvidia,num-lanes = <4>; }; + /* Apalis PCIe */ pci@2,0 { nvidia,num-lanes = <1>; }; + /* I210/I211 Gigabit Ethernet Controller (on-module) */ pci@3,0 { + status = "okay"; nvidia,num-lanes = <1>; + + pcie@0 { + reg = <0 0 0 0 0>; + local-mac-address = [00 00 00 00 00 00]; + }; }; }; host1x@50000000 { hdmi@54280000 { - vdd-supply = <&avdd_hdmi_3v3_reg>; - pll-supply = <&avdd_hdmi_pll_1v8_reg>; - + nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; - nvidia,ddc-i2c-bus = <&hdmiddc>; + pll-supply = <®_1v8_avdd_hdmi_pll>; + vdd-supply = <®_3v3_avdd_hdmi>; }; }; @@ -54,18 +59,18 @@ state_default: pinmux { /* Analogue Audio (On-module) */ - clk1_out_pw4 { + clk1-out-pw4 { nvidia,pins = "clk1_out_pw4"; nvidia,function = "extperiph1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap3_fs_pp0 { - nvidia,pins = "dap3_fs_pp0", - "dap3_sclk_pp3", - "dap3_din_pp1", - "dap3_dout_pp2"; + dap3-fs-pp0 { + nvidia,pins = "dap3_fs_pp0", + "dap3_sclk_pp3", + "dap3_din_pp1", + "dap3_dout_pp2"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; @@ -77,25 +82,28 @@ nvidia,function = "rsvd4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; /* Apalis BKL1_PWM */ - uart3_rts_n_pc0 { + uart3-rts-n-pc0 { nvidia,pins = "uart3_rts_n_pc0"; nvidia,function = "pwm0"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */ - uart3_cts_n_pa1 { + uart3-cts-n-pa1 { nvidia,pins = "uart3_cts_n_pa1"; nvidia,function = "rsvd2"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; /* Apalis CAN1 on SPI6 */ - spi2_cs0_n_px3 { + spi2-cs0-n-px3 { nvidia,pins = "spi2_cs0_n_px3", "spi2_miso_px1", "spi2_mosi_px0", @@ -105,7 +113,7 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; /* CAN_INT1 */ - spi2_cs1_n_pw2 { + spi2-cs1-n-pw2 { nvidia,pins = "spi2_cs1_n_pw2"; nvidia,function = "spi3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -114,7 +122,7 @@ }; /* Apalis CAN2 on SPI4 */ - gmi_a16_pj7 { + gmi-a16-pj7 { nvidia,pins = "gmi_a16_pj7", "gmi_a17_pb0", "gmi_a18_pb1", @@ -125,7 +133,7 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; /* CAN_INT2 */ - spi2_cs2_n_pw3 { + spi2-cs2-n-pw3 { nvidia,pins = "spi2_cs2_n_pw3"; nvidia,function = "spi3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -134,20 +142,20 @@ }; /* Apalis Digital Audio */ - clk1_req_pee2 { + clk1-req-pee2 { nvidia,pins = "clk1_req_pee2"; nvidia,function = "hda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - clk2_out_pw5 { + clk2-out-pw5 { nvidia,pins = "clk2_out_pw5"; nvidia,function = "extperiph2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap1_fs_pn0 { + dap1-fs-pn0 { nvidia,pins = "dap1_fs_pn0", "dap1_din_pn1", "dap1_dout_pn2", @@ -157,28 +165,125 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - /* Apalis I2C3 */ - cam_i2c_scl_pbb1 { + /* Apalis GPIO */ + kb-col0-pq0 { + nvidia,pins = "kb_col0_pq0", + "kb_col1_pq1", + "kb_row10_ps2", + "kb_row11_ps3", + "kb_row12_ps4", + "kb_row13_ps5", + "kb_row14_ps6", + "kb_row15_ps7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Multiplexed and therefore disabled */ + owr { + nvidia,pins = "owr"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis HDMI1 */ + hdmi-cec-pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi-int-pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "hdmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C1 */ + gen1-i2c-scl-pc4 { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C2 (DDC) */ + ddc-scl-pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C3 (CAM) */ + cam-i2c-scl-pbb1 { nvidia,pins = "cam_i2c_scl_pbb1", "cam_i2c_sda_pbb2"; nvidia,function = "i2c3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; + /* Apalis LCD1 */ + lcd-d0-pe0 { + nvidia,pins = "lcd_d0_pe0", + "lcd_d1_pe1", + "lcd_d2_pe2", + "lcd_d3_pe3", + "lcd_d4_pe4", + "lcd_d5_pe5", + "lcd_d6_pe6", + "lcd_d7_pe7", + "lcd_d8_pf0", + "lcd_d9_pf1", + "lcd_d10_pf2", + "lcd_d11_pf3", + "lcd_d12_pf4", + "lcd_d13_pf5", + "lcd_d14_pf6", + "lcd_d15_pf7", + "lcd_d16_pm0", + "lcd_d17_pm1", + "lcd_d18_pm2", + "lcd_d19_pm3", + "lcd_d20_pm4", + "lcd_d21_pm5", + "lcd_d22_pm6", + "lcd_d23_pm7", + "lcd_de_pj1", + "lcd_hsync_pj3", + "lcd_pclk_pb3", + "lcd_vsync_pj4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Apalis MMC1 */ - sdmmc3_clk_pa6 { - nvidia,pins = "sdmmc3_clk_pa6", - "sdmmc3_cmd_pa7"; + sdmmc3-clk-pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - sdmmc3_dat0_pb7 { - nvidia,pins = "sdmmc3_dat0_pb7", + sdmmc3-dat0-pb7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", "sdmmc3_dat1_pb6", "sdmmc3_dat2_pb5", "sdmmc3_dat3_pb4", @@ -194,10 +299,81 @@ pv3 { nvidia,pins = "pv3"; nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis Parallel Camera */ + cam-mclk-pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + vi-vsync-pd6 { + nvidia,pins = "vi_d0_pt4", + "vi_d1_pd5", + "vi_d2_pl0", + "vi_d3_pl1", + "vi_d4_pl2", + "vi_d5_pl3", + "vi_d6_pl4", + "vi_d7_pl5", + "vi_d8_pl6", + "vi_d9_pl7", + "vi_d10_pt2", + "vi_d11_pt3", + "vi_hsync_pd7", + "vi_pclk_pt0", + "vi_vsync_pd6"; + nvidia,function = "vi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; + /* Multiplexed and therefore disabled */ + kb-col2-pq2 { + nvidia,pins = "kb_col2_pq2", + "kb_col3_pq3", + "kb_col4_pq4", + "kb_row4_pr4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb-row0-pr0 { + nvidia,pins = "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2", + "kb_row3_pr3"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb-row5-pr5 { + nvidia,pins = "kb_row5_pr5", + "kb_row6_pr6", + "kb_row7_pr7"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* + * VI level-shifter direction + * (pull-down => default direction input) + */ + vi-mclk-pt1 { + nvidia,pins = "vi_mclk_pt1"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; /* Apalis PWM1 */ pu6 { @@ -232,21 +408,30 @@ }; /* Apalis RESET_MOCI# */ - gmi_rst_n_pi4 { + gmi-rst-n-pi4 { nvidia,pins = "gmi_rst_n_pi4"; nvidia,function = "gmi"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; + /* Apalis SATA1_ACT# */ + pex-l0-prsnt-n-pdd0 { + nvidia,pins = "pex_l0_prsnt_n_pdd0"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* Apalis SD1 */ - sdmmc1_clk_pz0 { + sdmmc1-clk-pz0 { nvidia,pins = "sdmmc1_clk_pz0"; nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - sdmmc1_cmd_pz1 { + sdmmc1-cmd-pz1 { nvidia,pins = "sdmmc1_cmd_pz1", "sdmmc1_dat0_py7", "sdmmc1_dat1_py6", @@ -257,16 +442,26 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; /* Apalis SD1_CD# */ - clk2_req_pcc5 { + clk2-req-pcc5 { nvidia,pins = "clk2_req_pcc5"; nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis SPDIF1 */ + spdif-out-pk5 { + nvidia,pins = "spdif_out_pk5", + "spdif_in_pk6"; + nvidia,function = "spdif"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; /* Apalis SPI1 */ - spi1_sck_px5 { + spi1-sck-px5 { nvidia,pins = "spi1_sck_px5", "spi1_mosi_px4", "spi1_miso_px7", @@ -277,7 +472,7 @@ }; /* Apalis SPI2 */ - lcd_sck_pz4 { + lcd-sck-pz4 { nvidia,pins = "lcd_sck_pz4", "lcd_sdout_pn5", "lcd_sdin_pz2", @@ -287,8 +482,30 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; + /* + * Apalis TS (Low-speed type specific) + * pins may be used as GPIOs + */ + kb-col5-pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb-col6-pq6 { + nvidia,pins = "kb_col6_pq6", + "kb_col7_pq7", + "kb_row8_ps0", + "kb_row9_ps1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Apalis UART1 */ - ulpi_data0 { + ulpi-data0 { nvidia,pins = "ulpi_data0_po1", "ulpi_data1_po2", "ulpi_data2_po3", @@ -303,7 +520,7 @@ }; /* Apalis UART2 */ - ulpi_clk_py0 { + ulpi-clk-py0 { nvidia,pins = "ulpi_clk_py0", "ulpi_dir_py1", "ulpi_nxt_py2", @@ -314,7 +531,7 @@ }; /* Apalis UART3 */ - uart2_rxd_pc3 { + uart2-rxd-pc3 { nvidia,pins = "uart2_rxd_pc3", "uart2_txd_pc2"; nvidia,function = "uartb"; @@ -323,7 +540,7 @@ }; /* Apalis UART4 */ - uart3_rxd_pw7 { + uart3-rxd-pw7 { nvidia,pins = "uart3_rxd_pw7", "uart3_txd_pw6"; nvidia,function = "uartc"; @@ -331,8 +548,26 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; + /* Apalis USBH_EN */ + pex-l0-rst-n-pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBH_OC# */ + pex-l0-clkreq-n-pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Apalis USBO1_EN */ - gen2_i2c_scl_pt5 { + gen2-i2c-scl-pt5 { nvidia,pins = "gen2_i2c_scl_pt5"; nvidia,function = "rsvd4"; nvidia,open-drain = <TEGRA_PIN_DISABLE>; @@ -341,7 +576,7 @@ }; /* Apalis USBO1_OC# */ - gen2_i2c_sda_pt6 { + gen2-i2c-sda-pt6 { nvidia,pins = "gen2_i2c_sda_pt6"; nvidia,function = "rsvd4"; nvidia,open-drain = <TEGRA_PIN_DISABLE>; @@ -350,6 +585,16 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; + /* Apalis VGA1 not supported and therefore disabled */ + crt-hsync-pv6 { + nvidia,pins = "crt_hsync_pv6", + "crt_vsync_pv7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* Apalis WAKE1_MICO */ pv1 { nvidia,pins = "pv1"; @@ -360,14 +605,16 @@ }; /* eMMC (On-module) */ - sdmmc4_clk_pcc4 { + sdmmc4-clk-pcc4 { nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_cmd_pt7", "sdmmc4_rst_n_pcc3"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat0_paa0 { + sdmmc4-dat0-paa0 { nvidia,pins = "sdmmc4_dat0_paa0", "sdmmc4_dat1_paa1", "sdmmc4_dat2_paa2", @@ -379,6 +626,34 @@ nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* LAN i210/i211 DEV_OFF_N, PE_RST_N (On-module) */ + pex-l2-prsnt-n-pdd7 { + nvidia,pins = "pex_l2_prsnt_n_pdd7", + "pex_l2_rst_n_pcc6"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* LAN i210/i211 PE_WAKE_N, SDP3 (On-module) */ + pex-wake-n-pdd3 { + nvidia,pins = "pex_wake_n_pdd3", + "pex_l2_clkreq_n_pcc7"; + nvidia,function = "pcie"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* LAN i210/i211 SMB_ALERT_N (On-module) */ + sys-clk-req-pz5 { + nvidia,pins = "sys_clk_req_pz5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; /* LVDS Transceiver Configuration */ @@ -391,7 +666,6 @@ nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; }; pbb3 { nvidia,pins = "pbb3", @@ -402,18 +676,121 @@ nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + + /* Not connected and therefore disabled */ + clk-32k-out-pa0 { + nvidia,pins = "clk3_out_pee0", + "clk3_req_pee1", + "clk_32k_out_pa0", + "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_fs_pp4", + "dap4_sclk_pp7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap2-fs-pa2 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5", + "lcd_dc0_pn6", + "lcd_m1_pw1", + "lcd_pwr1_pc1", + "pex_l1_clkreq_n_pdd6", + "pex_l1_prsnt_n_pdd4", + "pex_l1_rst_n_pdd5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-ad0-pg0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad2_pg2", + "gmi_ad3_pg3", + "gmi_ad4_pg4", + "gmi_ad5_pg5", + "gmi_ad6_pg6", + "gmi_ad7_pg7", + "gmi_ad8_ph0", + "gmi_ad9_ph1", + "gmi_ad10_ph2", + "gmi_ad11_ph3", + "gmi_ad12_ph4", + "gmi_ad13_ph5", + "gmi_ad14_ph6", + "gmi_ad15_ph7", + "gmi_adv_n_pk0", + "gmi_clk_pk1", + "gmi_cs4_n_pk2", + "gmi_cs2_n_pk3", + "gmi_dqs_pi2", + "gmi_iordy_pi5", + "gmi_oe_n_pi1", + "gmi_wait_pi7", + "gmi_wr_n_pi0", + "lcd_cs1_n_pw0", + "pu0", + "pu1", + "pu2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-cs0-n-pj0 { + nvidia,pins = "gmi_cs0_n_pj0", + "gmi_cs1_n_pj2", + "gmi_cs3_n_pk4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-cs6-n-pi3 { + nvidia,pins = "gmi_cs6_n_pi3"; + nvidia,function = "sata"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-cs7-n-pi6 { + nvidia,pins = "gmi_cs7_n_pi6"; + nvidia,function = "gmi_alt"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd-pwr0-pb2 { + nvidia,pins = "lcd_pwr0_pb2", + "lcd_pwr2_pc6", + "lcd_wr_n_pz3"; + nvidia,function = "hdcp"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2-cts-n-pj5 { + nvidia,pins = "uart2_cts_n_pj5", + "uart2_rts_n_pj6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; /* Power I2C (On-module) */ - pwr_i2c_scl_pz6 { + pwr-i2c-scl-pz6 { nvidia,pins = "pwr_i2c_scl_pz6", "pwr_i2c_sda_pz7"; nvidia,function = "i2cpwr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; @@ -422,15 +799,15 @@ * temperature sensor therefore requires disabling for * now */ - lcd_dc1_pd2 { + lcd-dc1-pd2 { nvidia,pins = "lcd_dc1_pd2"; nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - /* TOUCH_PEN_INT# */ + /* TOUCH_PEN_INT# (On-module) */ pv0 { nvidia,pins = "pv0"; nvidia,function = "rsvd1"; @@ -441,7 +818,19 @@ }; }; - hdmiddc: i2c@7000c700 { + serial@70006040 { + compatible = "nvidia,tegra30-hsuart"; + }; + + serial@70006200 { + compatible = "nvidia,tegra30-hsuart"; + }; + + serial@70006300 { + compatible = "nvidia,tegra30-hsuart"; + }; + + hdmi_ddc: i2c@7000c700 { clock-frequency = <10000>; }; @@ -457,12 +846,13 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - VDDA-supply = <&sys_3v3_reg>; - VDDIO-supply = <&sys_3v3_reg>; + VDDA-supply = <®_module_3v3_audio>; + VDDD-supply = <®_1v8_vio>; + VDDIO-supply = <®_module_3v3>; clocks = <&tegra_car TEGRA30_CLK_EXTERN1>; }; - pmic: tps65911@2d { + pmic: pmic@2d { compatible = "ti,tps65911"; reg = <0x2d>; @@ -475,43 +865,38 @@ #gpio-cells = <2>; gpio-controller; - vcc1-supply = <&sys_3v3_reg>; - vcc2-supply = <&sys_3v3_reg>; - vcc3-supply = <&vio_reg>; - vcc4-supply = <&sys_3v3_reg>; - vcc5-supply = <&sys_3v3_reg>; - vcc6-supply = <&vio_reg>; - vcc7-supply = <&charge_pump_5v0_reg>; - vccio-supply = <&sys_3v3_reg>; + vcc1-supply = <®_module_3v3>; + vcc2-supply = <®_module_3v3>; + vcc3-supply = <®_1v8_vio>; + vcc4-supply = <®_module_3v3>; + vcc5-supply = <®_module_3v3>; + vcc6-supply = <®_1v8_vio>; + vcc7-supply = <®_5v0_charge_pump>; + vccio-supply = <®_module_3v3>; regulators { - /* SW1: +V1.35_VDDIO_DDR */ vdd1_reg: vdd1 { - regulator-name = "vddio_ddr_1v35"; + regulator-name = "+V1.35_VDDIO_DDR"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; }; - /* SW2: +V1.05 */ vdd2_reg: vdd2 { - regulator-name = - "vdd_pexa,vdd_pexb,vdd_sata"; + regulator-name = "+V1.05"; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; }; - /* SW CTRL: +V1.0_VDD_CPU */ vddctrl_reg: vddctrl { - regulator-name = "vdd_cpu,vdd_sys"; + regulator-name = "+V1.0_VDD_CPU"; regulator-min-microvolt = <1150000>; regulator-max-microvolt = <1150000>; regulator-always-on; }; - /* SWIO: +V1.8 */ - vio_reg: vio { - regulator-name = "vdd_1v8_gen"; + reg_1v8_vio: vio { + regulator-name = "+V1.8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -521,27 +906,24 @@ /* * EN_+V3.3 switching via FET: - * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN - * see also v3_3 fixed supply + * +V3.3_AUDIO_AVDD_S, +V3.3 + * see also +V3.3 fixed supply */ ldo2_reg: ldo2 { - regulator-name = "en_3v3"; + regulator-name = "EN_+V3.3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - /* +V1.2_CSI */ ldo3_reg: ldo3 { - regulator-name = - "avdd_dsi_csi,pwrdet_mipi"; + regulator-name = "+V1.2_CSI"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - /* +V1.2_VDD_RTC */ ldo4_reg: ldo4 { - regulator-name = "vdd_rtc"; + regulator-name = "+V1.2_VDD_RTC"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -549,10 +931,10 @@ /* * +V2.8_AVDD_VDAC: - * only required for analog RGB + * only required for (unsupported) analog RGB */ ldo5_reg: ldo5 { - regulator-name = "avdd_vdac"; + regulator-name = "+V2.8_AVDD_VDAC"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; @@ -564,22 +946,20 @@ * granularity */ ldo6_reg: ldo6 { - regulator-name = "avdd_plle"; + regulator-name = "+V1.05_AVDD_PLLE"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; }; - /* +V1.2_AVDD_PLL */ ldo7_reg: ldo7 { - regulator-name = "avdd_pll"; + regulator-name = "+V1.2_AVDD_PLL"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - /* +V1.0_VDD_DDR_HS */ ldo8_reg: ldo8 { - regulator-name = "vdd_ddr_hs"; + regulator-name = "+V1.0_VDD_DDR_HS"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; @@ -588,11 +968,10 @@ }; /* STMPE811 touch screen controller */ - stmpe811@41 { + touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; - interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpio>; + irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; interrupt-controller; id = <0>; blocks = <0x5>; @@ -626,7 +1005,7 @@ /* * LM95245 temperature sensor - * Note: OVERT_N directly connected to PMIC PWRDN + * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN */ temp-sensor@4c { compatible = "national,lm95245"; @@ -634,7 +1013,7 @@ }; /* SW: +V1.2_VDD_CORE */ - tps62362@60 { + regulator@60 { compatible = "ti,tps62362"; reg = <0x60>; @@ -659,7 +1038,7 @@ reg = <1>; clocks = <&clk16m>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_RISING>; + interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>; spi-max-frequency = <10000000>; }; }; @@ -674,7 +1053,7 @@ reg = <0>; clocks = <&clk16m>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_RISING>; + interrupts = <TEGRA_GPIO(W, 2) IRQ_TYPE_EDGE_FALLING>; spi-max-frequency = <10000000>; }; }; @@ -688,6 +1067,18 @@ nvidia,core-pwr-off-time = <0>; nvidia,core-power-req-active-high; nvidia,sys-clock-req-active-high; + + /* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */ + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x2d>; + nvidia,reg-addr = <0x3f>; + nvidia,reg-data = <0x1>; + }; + }; + + hda@70030000 { + status = "okay"; }; ahub@70080000 { @@ -701,73 +1092,65 @@ status = "okay"; bus-width = <8>; non-removable; + vmmc-supply = <®_module_3v3>; /* VCC */ + vqmmc-supply = <®_1v8_vio>; /* VCCQ */ + mmc-ddr-1_8v; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + clk32k_in: xtal1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; - clk32k_in: clk@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + clk16m: osc4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + }; - clk16m: clk@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <16000000>; - clock-output-names = "clk16m"; - }; + reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll { + compatible = "regulator-fixed"; + regulator-name = "+V1.8_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_1v8_vio>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - avdd_hdmi_pll_1v8_reg: regulator@100 { - compatible = "regulator-fixed"; - reg = <100>; - regulator-name = "+V1.8_AVDD_HDMI_PLL"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - enable-active-high; - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - vin-supply = <&vio_reg>; - }; + reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_module_3v3>; + }; - sys_3v3_reg: regulator@101 { - compatible = "regulator-fixed"; - reg = <101>; - regulator-name = "3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_5v0_charge_pump: regulator-5v0-charge-pump { + compatible = "regulator-fixed"; + regulator-name = "+V5.0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - avdd_hdmi_3v3_reg: regulator@102 { - compatible = "regulator-fixed"; - reg = <102>; - regulator-name = "+V3.3_AVDD_HDMI"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - vin-supply = <&sys_3v3_reg>; - }; + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - charge_pump_5v0_reg: regulator@103 { - compatible = "regulator-fixed"; - reg = <103>; - regulator-name = "5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_module_3v3_audio: regulator-module-3v3-audio { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AUDIO_AVDD_S"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound { diff --git a/dts/src/arm/tegra30-colibri-eval-v3.dts b/dts/src/arm/tegra30-colibri-eval-v3.dts index 16e1f387aa..5965150ecd 100644 --- a/dts/src/arm/tegra30-colibri-eval-v3.dts +++ b/dts/src/arm/tegra30-colibri-eval-v3.dts @@ -1,15 +1,17 @@ // SPDX-License-Identifier: GPL-2.0 /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra30-colibri.dtsi" / { model = "Toradex Colibri T30 on Colibri Evaluation Board"; - compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", "nvidia,tegra30"; + compatible = "toradex,colibri_t30-eval-v3", "toradex,colibri_t30", + "nvidia,tegra30"; aliases { rtc0 = "/i2c@7000c000/rtc@68"; - rtc1 = "/i2c@7000d000/tps65911@2d"; + rtc1 = "/i2c@7000d000/pmic@2d"; rtc2 = "/rtc@7000e000"; serial0 = &uarta; serial1 = &uartb; @@ -27,22 +29,25 @@ nvidia,panel = <&panel>; }; }; + hdmi@54280000 { status = "okay"; + hdmi-supply = <®_5v0>; }; }; + /* Colibri UART-A */ serial@70006000 { status = "okay"; }; + /* Colibri UART-C */ serial@70006040 { - compatible = "nvidia,tegra30-hsuart"; status = "okay"; }; + /* Colibri UART-B */ serial@70006300 { - compatible = "nvidia,tegra30-hsuart"; status = "okay"; }; @@ -65,8 +70,12 @@ }; }; + /* GEN2_I2C: unused */ + + /* CAM_I2C (I2C3): unused */ + /* DDC_CLOCK/DATA on X3 pin 15/16 (e.g. display EDID) */ - hdmiddc: i2c@7000c700 { + i2c@7000c700 { status = "okay"; }; @@ -74,18 +83,17 @@ spi@7000d400 { status = "okay"; spi-max-frequency = <25000000>; - can0: can@0 { + + can@0 { compatible = "microchip,mcp2515"; reg = <0>; clocks = <&clk16m>; interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_RISING>; + /* CAN_INT */ + interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>; spi-max-frequency = <10000000>; - }; - spidev0: spi@1 { - compatible = "spidev"; - reg = <1>; - spi-max-frequency = <25000000>; + vdd-supply = <®_3v3>; + xceiver-supply = <®_5v0>; }; }; @@ -93,19 +101,19 @@ sdhci@78000200 { status = "okay"; bus-width = <4>; - cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */ no-1-8-v; }; /* EHCI instance 0: USB1_DP/N -> USBC_P/N */ usb@7d000000 { status = "okay"; + dr_mode = "otg"; }; usb-phy@7d000000 { status = "okay"; - dr_mode = "otg"; - vbus-supply = <&usbc_vbus_reg>; + vbus-supply = <®_usbc_vbus>; }; /* EHCI instance 2: USB3_DP/N -> USBH_P/N */ @@ -115,28 +123,23 @@ usb-phy@7d008000 { status = "okay"; - vbus-supply = <&usbh_vbus_reg>; + vbus-supply = <®_usbh_vbus>; }; backlight: backlight { compatible = "pwm-backlight"; - - /* PWM<A> */ - pwms = <&pwm 0 5000000>; brightness-levels = <255 128 64 32 16 8 4 0>; default-brightness-level = <6>; /* BL_ON */ enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3>; + pwms = <&pwm 0 5000000>; /* PWM<A> */ }; - clocks { - clk16m: clk@1 { - compatible = "fixed-clock"; - reg = <1>; - #clock-cells = <0>; - clock-frequency = <16000000>; - clock-output-names = "clk16m"; - }; + clk16m: osc3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; }; gpio-keys { @@ -157,58 +160,39 @@ * edt,et070080dh6: EDT 7.0" LCD TFT */ compatible = "edt,et057090dhu", "simple-panel"; - backlight = <&backlight>; + power-supply = <®_3v3>; }; - pwmleds { - compatible = "pwm-leds"; - - pwmb { - label = "PWM<B>"; - pwms = <&pwm 1 19600>; - max-brightness = <255>; - }; - pwmc { - label = "PWM<C>"; - pwms = <&pwm 2 19600>; - max-brightness = <255>; - }; - pwmd { - label = "PWM<D>"; - pwms = <&pwm 3 19600>; - max-brightness = <255>; - }; + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; - regulators { - sys_5v0_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; - usbc_vbus_reg: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usbc_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&sys_5v0_reg>; - }; + reg_usbc_vbus: regulator-usbc-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USB5"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_5v0>; + }; - /* USBH_PEN */ - usbh_vbus_reg: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "usbh_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; - vin-supply = <&sys_5v0_reg>; - }; + /* USBH_PEN resp. USB_P_EN */ + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; }; }; diff --git a/dts/src/arm/tegra30-colibri.dtsi b/dts/src/arm/tegra30-colibri.dtsi index 526ed71cf7..35af03ca9e 100644 --- a/dts/src/arm/tegra30-colibri.dtsi +++ b/dts/src/arm/tegra30-colibri.dtsi @@ -1,27 +1,22 @@ // SPDX-License-Identifier: GPL-2.0 -#include <dt-bindings/input/input.h> #include "tegra30.dtsi" /* * Toradex Colibri T30 Module Device Tree - * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E; IT: V1.1A + * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E, V1.1F; IT: V1.1A, V1.1B */ / { - model = "Toradex Colibri T30"; - compatible = "toradex,colibri_t30", "nvidia,tegra30"; - memory@80000000 { reg = <0x80000000 0x40000000>; }; host1x@50000000 { hdmi@54280000 { - vdd-supply = <&avdd_hdmi_3v3_reg>; - pll-supply = <&avdd_hdmi_pll_1v8_reg>; - + nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; - nvidia,ddc-i2c-bus = <&hdmiddc>; + pll-supply = <®_1v8_avdd_hdmi_pll>; + vdd-supply = <®_3v3_avdd_hdmi>; }; }; @@ -31,23 +26,173 @@ state_default: pinmux { /* Analogue Audio (On-module) */ - clk1_out_pw4 { + clk1-out-pw4 { nvidia,pins = "clk1_out_pw4"; nvidia,function = "extperiph1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - dap3_fs_pp0 { - nvidia,pins = "dap3_fs_pp0", - "dap3_sclk_pp3", - "dap3_din_pp1", - "dap3_dout_pp2"; + dap3-fs-pp0 { + nvidia,pins = "dap3_fs_pp0", + "dap3_sclk_pp3", + "dap3_din_pp1", + "dap3_dout_pp2"; nvidia,function = "i2s2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; + /* Colibri Address/Data Bus (GMI) */ + gmi-ad0-pg0 { + nvidia,pins = "gmi_ad0_pg0", + "gmi_ad2_pg2", + "gmi_ad3_pg3", + "gmi_ad4_pg4", + "gmi_ad5_pg5", + "gmi_ad6_pg6", + "gmi_ad7_pg7", + "gmi_ad8_ph0", + "gmi_ad9_ph1", + "gmi_ad10_ph2", + "gmi_ad11_ph3", + "gmi_ad12_ph4", + "gmi_ad13_ph5", + "gmi_ad14_ph6", + "gmi_ad15_ph7", + "gmi_adv_n_pk0", + "gmi_clk_pk1", + "gmi_cs4_n_pk2", + "gmi_cs2_n_pk3", + "gmi_iordy_pi5", + "gmi_oe_n_pi1", + "gmi_wait_pi7", + "gmi_wr_n_pi0", + "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3", + "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5", + "spi1_sck_px5", + "spi1_mosi_px4", + "spi1_cs0_n_px6", + "spi2_cs0_n_px3", + "spi2_miso_px1", + "spi2_mosi_px0", + "spi2_sck_px2", + "uart2_cts_n_pj5", + "uart2_rts_n_pj6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Further pins may be used as GPIOs */ + dap4-din-pp5 { + nvidia,pins = "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_fs_pp4", + "dap4_sclk_pp7", + "pbb7", + "sdmmc1_clk_pz0", + "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat3_py4", + "uart3_cts_n_pa1", + "uart3_txd_pw6", + "uart3_rxd_pw7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd-d18-pm2 { + nvidia,pins = "lcd_d18_pm2", + "lcd_d19_pm3", + "lcd_d20_pm4", + "lcd_d21_pm5", + "lcd_d22_pm6", + "lcd_d23_pm7", + "lcd_dc0_pn6", + "pex_l2_clkreq_n_pcc7"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd-cs0-n-pn4 { + nvidia,pins = "lcd_cs0_n_pn4", + "lcd_sdin_pz2", + "pu0", + "pu1", + "pu2", + "pu3", + "pu4", + "pu5", + "pu6", + "spi1_miso_px7", + "uart3_rts_n_pc0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd-pwr0-pb2 { + nvidia,pins = "lcd_pwr0_pb2", + "lcd_sck_pz4", + "lcd_sdout_pn5", + "lcd_wr_n_pz3"; + nvidia,function = "hdcp"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pbb4 { + nvidia,pins = "pbb4", + "pbb5", + "pbb6"; + nvidia,function = "displayb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Multiplexed RDnWR and therefore disabled */ + lcd-cs1-n-pw0 { + nvidia,pins = "lcd_cs1_n_pw0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* Multiplexed GMI_CLK and therefore disabled */ + owr { + nvidia,pins = "owr"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* Tri-stating GMI_WR_N on nPWE SODIMM pin 99 */ + sdmmc3-dat4-pd1 { + nvidia,pins = "sdmmc3_dat4_pd1"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* Not tri-stating GMI_WR_N on RDnWR SODIMM pin 93 */ + sdmmc3-dat5-pd0 { + nvidia,pins = "sdmmc3_dat5_pd0"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* Colibri BL_ON */ pv2 { nvidia,pins = "pv2"; @@ -57,7 +202,7 @@ }; /* Colibri Backlight PWM<A> */ - sdmmc3_dat3_pb4 { + sdmmc3-dat3-pb4 { nvidia,pins = "sdmmc3_dat3_pb4"; nvidia,function = "pwm0"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -65,7 +210,7 @@ }; /* Colibri CAN_INT */ - kb_row8_ps0 { + kb-row8-ps0 { nvidia,pins = "kb_row8_ps0"; nvidia,function = "kbc"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; @@ -73,26 +218,133 @@ nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; + /* Colibri DDC */ + ddc-scl-pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri EXT_IO* */ + gen2-i2c-scl-pt5 { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "rsvd4"; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + spdif-in-pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri GPIO */ + clk2-out-pw5 { + nvidia,pins = "clk2_out_pw5", + "pcc2", + "pv3", + "sdmmc1_dat2_py5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd-pwr1-pc1 { + nvidia,pins = "lcd_pwr1_pc1", + "pex_l1_clkreq_n_pdd6", + "pex_l1_rst_n_pdd5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pv1 { + nvidia,pins = "pv1", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri HOTPLUG_DETECT (HDMI) */ + hdmi-int-pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "hdmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri I2C */ + gen1-i2c-scl-pc4 { + nvidia,pins = "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri LCD (L_* resp. LDD<*>) */ + lcd-d0-pe0 { + nvidia,pins = "lcd_d0_pe0", + "lcd_d1_pe1", + "lcd_d2_pe2", + "lcd_d3_pe3", + "lcd_d4_pe4", + "lcd_d5_pe5", + "lcd_d6_pe6", + "lcd_d7_pe7", + "lcd_d8_pf0", + "lcd_d9_pf1", + "lcd_d10_pf2", + "lcd_d11_pf3", + "lcd_d12_pf4", + "lcd_d13_pf5", + "lcd_d14_pf6", + "lcd_d15_pf7", + "lcd_d16_pm0", + "lcd_d17_pm1", + "lcd_de_pj1", + "lcd_hsync_pj3", + "lcd_pclk_pb3", + "lcd_vsync_pj4"; + nvidia,function = "displaya"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; /* * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE - * todays display need DE, disable LCD_M1 + * today's display need DE, disable LCD_M1 */ - lcd_m1_pw1 { + lcd-m1-pw1 { nvidia,pins = "lcd_m1_pw1"; nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; /* Colibri MMC */ - kb_row10_ps2 { + kb-row10-ps2 { nvidia,pins = "kb_row10_ps2"; nvidia,function = "sdmmc2"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - kb_row11_ps3 { + kb-row11-ps3 { nvidia,pins = "kb_row11_ps3", "kb_row12_ps4", "kb_row13_ps5", @@ -102,9 +354,108 @@ nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; + /* Colibri MMC_CD */ + gmi-wp-n-pc7 { + nvidia,pins = "gmi_wp_n_pc7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* Multiplexed and therefore disabled */ + cam-mclk-pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + cam-i2c-scl-pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + pbb0 { + nvidia,pins = "pbb0", + "pcc1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb3 { + nvidia,pins = "pbb3"; + nvidia,function = "displayb"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri nRESET_OUT */ + gmi-rst-n-pi4 { + nvidia,pins = "gmi_rst_n_pi4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* + * Colibri Parallel Camera (Optional) + * pins multiplexed with others and therefore disabled + */ + vi-vsync-pd6 { + nvidia,pins = "vi_d0_pt4", + "vi_d1_pd5", + "vi_d2_pl0", + "vi_d3_pl1", + "vi_d4_pl2", + "vi_d5_pl3", + "vi_d6_pl4", + "vi_d7_pl5", + "vi_d8_pl6", + "vi_d9_pl7", + "vi_d10_pt2", + "vi_d11_pt3", + "vi_hsync_pd7", + "vi_mclk_pt1", + "vi_pclk_pt0", + "vi_vsync_pd6"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri PWM<B> */ + sdmmc3-dat2-pb5 { + nvidia,pins = "sdmmc3_dat2_pb5"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri PWM<C> */ + sdmmc3-clk-pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri PWM<D> */ + sdmmc3-cmd-pa7 { + nvidia,pins = "sdmmc3_cmd_pa7"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; /* Colibri SSP */ - ulpi_clk_py0 { + ulpi-clk-py0 { nvidia,pins = "ulpi_clk_py0", "ulpi_dir_py1", "ulpi_nxt_py2", @@ -113,16 +464,18 @@ nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - sdmmc3_dat6_pd3 { + /* Multiplexed SSPFRM, SSPTXD and therefore disabled */ + sdmmc3-dat6-pd3 { nvidia,pins = "sdmmc3_dat6_pd3", "sdmmc3_dat7_pd4"; nvidia,function = "spdif"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - /* Colibri UART_A */ - ulpi_data0 { + /* Colibri UART-A */ + ulpi-data0 { nvidia,pins = "ulpi_data0_po1", "ulpi_data1_po2", "ulpi_data2_po3", @@ -136,8 +489,8 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - /* Colibri UART_B */ - gmi_a16_pj7 { + /* Colibri UART-B */ + gmi-a16-pj7 { nvidia,pins = "gmi_a16_pj7", "gmi_a17_pb0", "gmi_a18_pb1", @@ -147,8 +500,8 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - /* Colibri UART_C */ - uart2_rxd { + /* Colibri UART-C */ + uart2-rxd { nvidia,pins = "uart2_rxd_pc3", "uart2_txd_pc2"; nvidia,function = "uartb"; @@ -156,15 +509,53 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; }; - /* eMMC */ - sdmmc4_clk_pcc4 { + /* Colibri USBC_DET */ + spdif-out-pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri USBH_PEN */ + spi2-cs1-n-pw2 { + nvidia,pins = "spi2_cs1_n_pw2"; + nvidia,function = "spi2_alt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri USBH_OC */ + spi2-cs2-n-pw3, { + nvidia,pins = "spi2_cs2_n_pw3"; + nvidia,function = "spi2_alt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri VGA not supported and therefore disabled */ + crt-hsync-pv6 { + nvidia,pins = "crt_hsync_pv6", + "crt_vsync_pv7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* eMMC (On-module) */ + sdmmc4-clk-pcc4 { nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_cmd_pt7", "sdmmc4_rst_n_pcc3"; nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - sdmmc4_dat0_paa0 { + sdmmc4-dat0-paa0 { nvidia,pins = "sdmmc4_dat0_paa0", "sdmmc4_dat1_paa1", "sdmmc4_dat2_paa2", @@ -176,17 +567,111 @@ nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_UP>; nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* LAN_EXT_WAKEUP#, LAN_PME (On-module) */ + pex-l0-rst-n-pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1", + "pex_wake_n_pdd3"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* LAN_V_BUS, LAN_RESET# (On-module) */ + pex-l0-clkreq-n-pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2", + "pex_l0_prsnt_n_pdd0"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* nBATT_FAULT(SENSE), nVDD_FAULT(SENSE) */ + pex-l2-rst-n-pcc6 { + nvidia,pins = "pex_l2_rst_n_pcc6", + "pex_l2_prsnt_n_pdd7"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Not connected and therefore disabled */ + clk1-req-pee2 { + nvidia,pins = "clk1_req_pee2", + "pex_l1_prsnt_n_pdd4"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk2-req-pcc5 { + nvidia,pins = "clk2_req_pcc5", + "clk3_out_pee0", + "clk3_req_pee1", + "clk_32k_out_pa0", + "hdmi_cec_pee3", + "sys_clk_req_pz5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gmi-dqs-pi2 { + nvidia,pins = "gmi_dqs_pi2", + "kb_col2_pq2", + "kb_col3_pq3", + "kb_col4_pq4", + "kb_col5_pq5", + "kb_row4_pr4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb-col0-pq0 { + nvidia,pins = "kb_col0_pq0", + "kb_col1_pq1", + "kb_col6_pq6", + "kb_col7_pq7", + "kb_row5_pr5", + "kb_row6_pr6", + "kb_row7_pr7", + "kb_row9_ps1"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb-row0-pr0 { + nvidia,pins = "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2", + "kb_row3_pr3"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + lcd-pwr2-pc6 { + nvidia,pins = "lcd_pwr2_pc6"; + nvidia,function = "hdcp"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; /* Power I2C (On-module) */ - pwr_i2c_scl_pz6 { + pwr-i2c-scl-pz6 { nvidia,pins = "pwr_i2c_scl_pz6", "pwr_i2c_sda_pz7"; nvidia,function = "i2cpwr"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; - nvidia,lock = <TEGRA_PIN_DISABLE>; nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; @@ -195,15 +680,15 @@ * temperature sensor therefore requires disabling for * now */ - lcd_dc1_pd2 { + lcd-dc1-pd2 { nvidia,pins = "lcd_dc1_pd2"; nvidia,function = "rsvd3"; - nvidia,pull = <TEGRA_PIN_PULL_NONE>; - nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; - /* TOUCH_PEN_INT# */ + /* TOUCH_PEN_INT# (On-module) */ pv0 { nvidia,pins = "pv0"; nvidia,function = "rsvd1"; @@ -214,13 +699,21 @@ }; }; - hdmiddc: i2c@7000c700 { + serial@70006040 { + compatible = "nvidia,tegra30-hsuart"; + }; + + serial@70006300 { + compatible = "nvidia,tegra30-hsuart"; + }; + + hdmi_ddc: i2c@7000c700 { clock-frequency = <10000>; }; /* * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and - * touch screen controller + * touch screen controller (On-module) */ i2c@7000d000 { status = "okay"; @@ -230,12 +723,13 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; - VDDA-supply = <&sys_3v3_reg>; - VDDIO-supply = <&sys_3v3_reg>; + VDDA-supply = <®_module_3v3_audio>; + VDDD-supply = <®_1v8_vio>; + VDDIO-supply = <®_module_3v3>; clocks = <&tegra_car TEGRA30_CLK_EXTERN1>; }; - pmic: tps65911@2d { + pmic: pmic@2d { compatible = "ti,tps65911"; reg = <0x2d>; @@ -248,19 +742,18 @@ #gpio-cells = <2>; gpio-controller; - vcc1-supply = <&sys_3v3_reg>; - vcc2-supply = <&sys_3v3_reg>; - vcc3-supply = <&vio_reg>; - vcc4-supply = <&sys_3v3_reg>; - vcc5-supply = <&sys_3v3_reg>; - vcc6-supply = <&vio_reg>; - vcc7-supply = <&charge_pump_5v0_reg>; - vccio-supply = <&sys_3v3_reg>; + vcc1-supply = <®_module_3v3>; + vcc2-supply = <®_module_3v3>; + vcc3-supply = <®_1v8_vio>; + vcc4-supply = <®_module_3v3>; + vcc5-supply = <®_module_3v3>; + vcc6-supply = <®_1v8_vio>; + vcc7-supply = <®_5v0_charge_pump>; + vccio-supply = <®_module_3v3>; regulators { - /* SW1: +V1.35_VDDIO_DDR */ vdd1_reg: vdd1 { - regulator-name = "vddio_ddr_1v35"; + regulator-name = "+V1.35_VDDIO_DDR"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; @@ -268,17 +761,15 @@ /* SW2: unused */ - /* SW CTRL: +V1.0_VDD_CPU */ vddctrl_reg: vddctrl { - regulator-name = "vdd_cpu,vdd_sys"; + regulator-name = "+V1.0_VDD_CPU"; regulator-min-microvolt = <1150000>; regulator-max-microvolt = <1150000>; regulator-always-on; }; - /* SWIO: +V1.8 */ - vio_reg: vio { - regulator-name = "vdd_1v8_gen"; + reg_1v8_vio: vio { + regulator-name = "+V1.8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; @@ -289,10 +780,10 @@ /* * EN_+V3.3 switching via FET: * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN - * see also 3v3 fixed supply + * see also +V3.3 fixed supply */ ldo2_reg: ldo2 { - regulator-name = "en_3v3"; + regulator-name = "EN_+V3.3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -300,9 +791,8 @@ /* LDO3: unused */ - /* +V1.2_VDD_RTC */ ldo4_reg: ldo4 { - regulator-name = "vdd_rtc"; + regulator-name = "+V1.2_VDD_RTC"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; @@ -310,10 +800,10 @@ /* * +V2.8_AVDD_VDAC: - * only required for analog RGB + * only required for (unsupported) analog RGB */ ldo5_reg: ldo5 { - regulator-name = "avdd_vdac"; + regulator-name = "+V2.8_AVDD_VDAC"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; @@ -325,22 +815,20 @@ * granularity */ ldo6_reg: ldo6 { - regulator-name = "avdd_plle"; + regulator-name = "+V1.05_AVDD_PLLE"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; }; - /* +V1.2_AVDD_PLL */ ldo7_reg: ldo7 { - regulator-name = "avdd_pll"; + regulator-name = "+V1.2_AVDD_PLL"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - /* +V1.0_VDD_DDR_HS */ ldo8_reg: ldo8 { - regulator-name = "vdd_ddr_hs"; + regulator-name = "+V1.0_VDD_DDR_HS"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; @@ -349,11 +837,10 @@ }; /* STMPE811 touch screen controller */ - stmpe811@41 { + touchscreen@41 { compatible = "st,stmpe811"; reg = <0x41>; - interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; - interrupt-parent = <&gpio>; + irq-gpio = <&gpio TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; interrupt-controller; id = <0>; blocks = <0x5>; @@ -387,7 +874,7 @@ /* * LM95245 temperature sensor - * Note: OVERT_N directly connected to PMIC PWRDN + * Note: OVERT1# directly connected to TPS65911 PMIC PWRDN */ temp-sensor@4c { compatible = "national,lm95245"; @@ -395,7 +882,7 @@ }; /* SW: +V1.2_VDD_CORE */ - tps62362@60 { + regulator@60 { compatible = "ti,tps62362"; reg = <0x60>; @@ -419,6 +906,18 @@ nvidia,core-pwr-off-time = <0>; nvidia,core-power-req-active-high; nvidia,sys-clock-req-active-high; + + /* Set DEV_OFF bit in DCDC control register of TPS65911 PMIC */ + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x2d>; + nvidia,reg-addr = <0x3f>; + nvidia,reg-data = <0x1>; + }; + }; + + hda@70030000 { + status = "okay"; }; ahub@70080000 { @@ -432,75 +931,85 @@ status = "okay"; bus-width = <8>; non-removable; + vmmc-supply = <®_module_3v3>; /* VCC */ + vqmmc-supply = <®_1v8_vio>; /* VCCQ */ + mmc-ddr-1_8v; }; - /* EHCI instance 1: USB2_DP/N -> AX88772B */ + /* EHCI instance 1: USB2_DP/N -> AX88772B (On-module) */ usb@7d004000 { status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + asix@1 { + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; + }; }; usb-phy@7d004000 { status = "okay"; - nvidia,is-wired = <1>; + vbus-supply = <®_lan_v_bus>; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + clk32k_in: xtal1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; - clk32k_in: clk@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; + reg_1v8_avdd_hdmi_pll: regulator-1v8-avdd-hdmi-pll { + compatible = "regulator-fixed"; + regulator-name = "+V1.8_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_1v8_vio>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <®_module_3v3>; + }; - avdd_hdmi_pll_1v8_reg: regulator@100 { - compatible = "regulator-fixed"; - reg = <100>; - regulator-name = "+V1.8_AVDD_HDMI_PLL"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - enable-active-high; - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - vin-supply = <&vio_reg>; - }; + reg_5v0_charge_pump: regulator-5v0-charge-pump { + compatible = "regulator-fixed"; + regulator-name = "+V5.0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; - sys_3v3_reg: regulator@101 { - compatible = "regulator-fixed"; - reg = <101>; - regulator-name = "3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; + reg_lan_v_bus: regulator-lan-v-bus { + compatible = "regulator-fixed"; + regulator-name = "LAN_V_BUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; + }; - avdd_hdmi_3v3_reg: regulator@102 { - compatible = "regulator-fixed"; - reg = <102>; - regulator-name = "+V3.3_AVDD_HDMI"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - vin-supply = <&sys_3v3_reg>; - }; + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - charge_pump_5v0_reg: regulator@103 { - compatible = "regulator-fixed"; - reg = <103>; - regulator-name = "5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; + reg_module_3v3_audio: regulator-module-3v3-audio { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AUDIO_AVDD_S"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; sound { @@ -519,3 +1028,12 @@ clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; + +&gpio { + lan-reset-n { + gpio-hog; + gpios = <TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LAN_RESET#"; + }; +}; diff --git a/dts/src/arm/tegra30.dtsi b/dts/src/arm/tegra30.dtsi index a6781f6533..d2b553f767 100644 --- a/dts/src/arm/tegra30.dtsi +++ b/dts/src/arm/tegra30.dtsi @@ -896,7 +896,7 @@ nvidia,elastic-limit = <16>; nvidia,term-range-adj = <6>; nvidia,xcvr-setup = <51>; - nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-setup-use-fuses; nvidia,xcvr-lsfslew = <1>; nvidia,xcvr-lsrslew = <1>; nvidia,xcvr-hsslew = <32>; @@ -933,7 +933,7 @@ nvidia,elastic-limit = <16>; nvidia,term-range-adj = <6>; nvidia,xcvr-setup = <51>; - nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-setup-use-fuses; nvidia,xcvr-lsfslew = <2>; nvidia,xcvr-lsrslew = <2>; nvidia,xcvr-hsslew = <32>; @@ -969,7 +969,7 @@ nvidia,elastic-limit = <16>; nvidia,term-range-adj = <6>; nvidia,xcvr-setup = <51>; - nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-setup-use-fuses; nvidia,xcvr-lsfslew = <2>; nvidia,xcvr-lsrslew = <2>; nvidia,xcvr-hsslew = <32>; @@ -1013,5 +1013,9 @@ <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&{/cpus/cpu@0}>, + <&{/cpus/cpu@1}>, + <&{/cpus/cpu@2}>, + <&{/cpus/cpu@3}>; }; }; diff --git a/dts/src/arm/uniphier-ld4-ref.dts b/dts/src/arm/uniphier-ld4-ref.dts index 21407e159b..3aaca10f66 100644 --- a/dts/src/arm/uniphier-ld4-ref.dts +++ b/dts/src/arm/uniphier-ld4-ref.dts @@ -63,6 +63,10 @@ status = "okay"; }; +&sd { + status = "okay"; +}; + &usb0 { status = "okay"; }; diff --git a/dts/src/arm/uniphier-ld4.dtsi b/dts/src/arm/uniphier-ld4.dtsi index 37950ad2de..b73d594b6d 100644 --- a/dts/src/arm/uniphier-ld4.dtsi +++ b/dts/src/arm/uniphier-ld4.dtsi @@ -63,6 +63,17 @@ cache-level = <2>; }; + spi: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -224,6 +235,40 @@ }; }; + sd: sdhc@5a400000 { + compatible = "socionext,uniphier-sd-v2.91"; + status = "disabled"; + reg = <0x5a400000 0x200>; + interrupts = <0 76 4>; + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&pinctrl_sd>; + pinctrl-1 = <&pinctrl_sd_uhs>; + clocks = <&mio_clk 0>; + reset-names = "host", "bridge"; + resets = <&mio_rst 0>, <&mio_rst 3>; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + }; + + emmc: sdhc@5a500000 { + compatible = "socionext,uniphier-sd-v2.91"; + status = "disabled"; + reg = <0x5a500000 0x200>; + interrupts = <0 78 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; + clocks = <&mio_clk 1>; + reset-names = "host", "bridge", "hw"; + resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; + bus-width = <8>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + non-removable; + }; + usb0: usb@5a800100 { compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; @@ -347,7 +392,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/dts/src/arm/uniphier-ld6b-ref.dts b/dts/src/arm/uniphier-ld6b-ref.dts index a0a44a422e..3d9080ee7a 100644 --- a/dts/src/arm/uniphier-ld6b-ref.dts +++ b/dts/src/arm/uniphier-ld6b-ref.dts @@ -65,6 +65,10 @@ status = "okay"; }; +&sd { + status = "okay"; +}; + ð { status = "okay"; phy-handle = <ðphy>; @@ -76,6 +80,14 @@ }; }; +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + &nand { status = "okay"; }; diff --git a/dts/src/arm/uniphier-pinctrl.dtsi b/dts/src/arm/uniphier-pinctrl.dtsi index 51f0e69f49..1fee5ffbfb 100644 --- a/dts/src/arm/uniphier-pinctrl.dtsi +++ b/dts/src/arm/uniphier-pinctrl.dtsi @@ -121,11 +121,36 @@ function = "sd"; }; + pinctrl_sd_uhs: sd-uhs { + groups = "sd"; + function = "sd"; + }; + pinctrl_sd1: sd1 { groups = "sd1"; function = "sd1"; }; + pinctrl_spi0: spi0 { + groups = "spi0"; + function = "spi0"; + }; + + pinctrl_spi1: spi1 { + groups = "spi1"; + function = "spi1"; + }; + + pinctrl_spi2: spi2 { + groups = "spi2"; + function = "spi2"; + }; + + pinctrl_spi3: spi3 { + groups = "spi3"; + function = "spi3"; + }; + pinctrl_system_bus: system-bus { groups = "system_bus", "system_bus_cs1"; function = "system_bus"; diff --git a/dts/src/arm/uniphier-pro4-ace.dts b/dts/src/arm/uniphier-pro4-ace.dts index db1b08935a..92cc48dd86 100644 --- a/dts/src/arm/uniphier-pro4-ace.dts +++ b/dts/src/arm/uniphier-pro4-ace.dts @@ -68,6 +68,10 @@ status = "okay"; }; +&sd { + status = "okay"; +}; + &usb2 { status = "okay"; }; @@ -86,3 +90,11 @@ reg = <1>; }; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/dts/src/arm/uniphier-pro4-ref.dts b/dts/src/arm/uniphier-pro4-ref.dts index efb084983b..28038b17bb 100644 --- a/dts/src/arm/uniphier-pro4-ref.dts +++ b/dts/src/arm/uniphier-pro4-ref.dts @@ -65,6 +65,10 @@ status = "okay"; }; +&sd { + status = "okay"; +}; + &usb2 { status = "okay"; }; @@ -84,6 +88,14 @@ }; }; +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + &nand { status = "okay"; }; diff --git a/dts/src/arm/uniphier-pro4-sanji.dts b/dts/src/arm/uniphier-pro4-sanji.dts index dac4d6679a..dda1a2f214 100644 --- a/dts/src/arm/uniphier-pro4-sanji.dts +++ b/dts/src/arm/uniphier-pro4-sanji.dts @@ -71,6 +71,10 @@ status = "okay"; }; +&emmc { + status = "okay"; +}; + ð { status = "okay"; phy-handle = <ðphy>; @@ -81,3 +85,11 @@ reg = <1>; }; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/dts/src/arm/uniphier-pro4.dtsi b/dts/src/arm/uniphier-pro4.dtsi index 49539f0352..0beb606cf3 100644 --- a/dts/src/arm/uniphier-pro4.dtsi +++ b/dts/src/arm/uniphier-pro4.dtsi @@ -71,6 +71,17 @@ cache-level = <2>; }; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -258,6 +269,54 @@ }; }; + sd: sdhc@5a400000 { + compatible = "socionext,uniphier-sd-v2.91"; + status = "disabled"; + reg = <0x5a400000 0x200>; + interrupts = <0 76 4>; + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&pinctrl_sd>; + pinctrl-1 = <&pinctrl_sd_uhs>; + clocks = <&mio_clk 0>; + reset-names = "host", "bridge"; + resets = <&mio_rst 0>, <&mio_rst 3>; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + }; + + emmc: sdhc@5a500000 { + compatible = "socionext,uniphier-sd-v2.91"; + status = "disabled"; + reg = <0x5a500000 0x200>; + interrupts = <0 78 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; + clocks = <&mio_clk 1>; + reset-names = "host", "bridge", "hw"; + resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; + bus-width = <8>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + non-removable; + }; + + sd1: sdhc@5a600000 { + compatible = "socionext,uniphier-sd-v2.91"; + status = "disabled"; + reg = <0x5a600000 0x200>; + interrupts = <0 85 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1>; + clocks = <&mio_clk 2>; + reset-names = "host", "bridge"; + resets = <&mio_rst 2>, <&mio_rst 5>; + bus-width = <4>; + cap-sd-highspeed; + }; + usb2: usb@5a800100 { compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; @@ -269,6 +328,8 @@ <&mio_clk 12>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>; + phy-names = "usb"; + phys = <&usb_phy0>; has-transaction-translator; }; @@ -283,6 +344,8 @@ <&mio_clk 13>; resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>; + phy-names = "usb"; + phys = <&usb_phy1>; has-transaction-translator; }; @@ -294,6 +357,34 @@ pinctrl: pinctrl { compatible = "socionext,uniphier-pro4-pinctrl"; }; + + usb-phy { + compatible = "socionext,uniphier-pro4-usb2-phy"; + #address-cells = <1>; + #size-cells = <0>; + + usb_phy0: phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + usb_phy1: phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + + usb_phy2: phy@2 { + reg = <2>; + #phy-cells = <0>; + vbus-supply = <&usb0_vbus>; + }; + + usb_phy3: phy@3 { + reg = <3>; + #phy-cells = <0>; + vbus-supply = <&usb1_vbus>; + }; + }; }; soc-glue@5f900000 { @@ -386,6 +477,101 @@ }; }; + usb0: usb@65a00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65a00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 134 4>, <0 135 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; + resets = <&usb0_rst 4>; + phys = <&usb_phy2>, <&usb0_ssphy>; + dr_mode = "host"; + }; + + usb-glue@65b00000 { + compatible = "socionext,uniphier-pro4-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x100>; + + usb0_vbus: regulator@0 { + compatible = "socionext,uniphier-pro4-usb3-regulator"; + reg = <0 0x10>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + }; + + usb0_ssphy: ss-phy@10 { + compatible = "socionext,uniphier-pro4-usb3-ssphy"; + reg = <0x10 0x10>; + #phy-cells = <0>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + vbus-supply = <&usb0_vbus>; + }; + + usb0_rst: reset@40 { + compatible = "socionext,uniphier-pro4-usb3-reset"; + reg = <0x40 0x4>; + #reset-cells = <1>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 14>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 14>; + }; + }; + + usb1: usb@65c00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65c00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 137 4>, <0 138 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>; + resets = <&usb1_rst 4>; + phys = <&usb_phy3>; + dr_mode = "host"; + }; + + usb-glue@65d00000 { + compatible = "socionext,uniphier-pro4-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65d00000 0x100>; + + usb1_vbus: regulator@0 { + compatible = "socionext,uniphier-pro4-usb3-regulator"; + reg = <0 0x10>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + }; + + usb1_rst: reset@40 { + compatible = "socionext,uniphier-pro4-usb3-reset"; + reg = <0x40 0x4>; + #reset-cells = <1>; + clock-names = "gio", "link"; + clocks = <&sys_clk 12>, <&sys_clk 15>; + reset-names = "gio", "link"; + resets = <&sys_rst 12>, <&sys_rst 15>; + }; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5a"; status = "disabled"; @@ -394,7 +580,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/dts/src/arm/uniphier-pro5.dtsi b/dts/src/arm/uniphier-pro5.dtsi index 06c2cef91e..3657387394 100644 --- a/dts/src/arm/uniphier-pro5.dtsi +++ b/dts/src/arm/uniphier-pro5.dtsi @@ -156,6 +156,28 @@ cache-level = <3>; }; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi1: spi@54006100 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006100 0x100>; + interrupts = <0 216 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -439,9 +461,44 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; + + emmc: sdhc@68400000 { + compatible = "socionext,uniphier-sd-v3.1"; + status = "disabled"; + reg = <0x68400000 0x800>; + interrupts = <0 78 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; + clocks = <&sd_clk 1>; + reset-names = "host", "hw"; + resets = <&sd_rst 1>, <&sd_rst 6>; + bus-width = <8>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + non-removable; + }; + + sd: sdhc@68800000 { + compatible = "socionext,uniphier-sd-v3.1"; + status = "disabled"; + reg = <0x68800000 0x800>; + interrupts = <0 76 4>; + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&pinctrl_sd>; + pinctrl-1 = <&pinctrl_sd_uhs>; + clocks = <&sd_clk 0>; + reset-names = "host"; + resets = <&sd_rst 0>; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + }; }; }; diff --git a/dts/src/arm/uniphier-pxs2-gentil.dts b/dts/src/arm/uniphier-pxs2-gentil.dts index bed26b8ed9..e27fd4f2a5 100644 --- a/dts/src/arm/uniphier-pxs2-gentil.dts +++ b/dts/src/arm/uniphier-pxs2-gentil.dts @@ -76,6 +76,10 @@ }; }; +&emmc { + status = "okay"; +}; + ð { status = "okay"; phy-handle = <ðphy>; @@ -86,3 +90,11 @@ reg = <1>; }; }; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/dts/src/arm/uniphier-pxs2-vodka.dts b/dts/src/arm/uniphier-pxs2-vodka.dts index b13d2d16dd..23fe42b740 100644 --- a/dts/src/arm/uniphier-pxs2-vodka.dts +++ b/dts/src/arm/uniphier-pxs2-vodka.dts @@ -77,6 +77,10 @@ status = "okay"; }; +&emmc { + status = "okay"; +}; + ð { status = "okay"; phy-handle = <ðphy>; @@ -87,3 +91,7 @@ reg = <1>; }; }; + +&usb0 { + status = "okay"; +}; diff --git a/dts/src/arm/uniphier-pxs2.dtsi b/dts/src/arm/uniphier-pxs2.dtsi index e2d1a22c59..8d20e9548e 100644 --- a/dts/src/arm/uniphier-pxs2.dtsi +++ b/dts/src/arm/uniphier-pxs2.dtsi @@ -167,6 +167,28 @@ cache-level = <2>; }; + spi0: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + + spi1: spi@54006100 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006100 0x100>; + interrupts = <0 216 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -422,6 +444,40 @@ }; }; + emmc: sdhc@5a000000 { + compatible = "socionext,uniphier-sd-v3.1.1"; + status = "disabled"; + reg = <0x5a000000 0x800>; + interrupts = <0 78 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; + clocks = <&sd_clk 1>; + reset-names = "host", "hw"; + resets = <&sd_rst 1>, <&sd_rst 6>; + bus-width = <8>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + non-removable; + }; + + sd: sdhc@5a400000 { + compatible = "socionext,uniphier-sd-v3.1.1"; + status = "disabled"; + reg = <0x5a400000 0x800>; + interrupts = <0 76 4>; + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&pinctrl_sd>; + pinctrl-1 = <&pinctrl_sd_uhs>; + clocks = <&sd_clk 0>; + reset-names = "host"; + resets = <&sd_rst 0>; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + }; + soc_glue: soc-glue@5f800000 { compatible = "socionext,uniphier-pxs2-soc-glue", "simple-mfd", "syscon"; @@ -523,6 +579,186 @@ }; }; + usb0: usb@65a00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65a00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 134 4>, <0 135 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>; + resets = <&usb0_rst 15>; + phys = <&usb0_hsphy0>, <&usb0_hsphy1>, + <&usb0_ssphy0>, <&usb0_ssphy1>; + dr_mode = "host"; + }; + + usb-glue@65b00000 { + compatible = "socionext,uniphier-pxs2-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65b00000 0x400>; + + usb0_rst: reset@0 { + compatible = "socionext,uniphier-pxs2-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb0_vbus0: regulator@100 { + compatible = "socionext,uniphier-pxs2-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb0_vbus1: regulator@110 { + compatible = "socionext,uniphier-pxs2-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "link"; + clocks = <&sys_clk 14>; + reset-names = "link"; + resets = <&sys_rst 14>; + }; + + usb0_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-pxs2-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb0_vbus0>; + }; + + usb0_hsphy1: hs-phy@210 { + compatible = "socionext,uniphier-pxs2-usb3-hsphy"; + reg = <0x210 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 16>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 16>; + vbus-supply = <&usb0_vbus1>; + }; + + usb0_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-pxs2-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 17>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 17>; + vbus-supply = <&usb0_vbus0>; + }; + + usb0_ssphy1: ss-phy@310 { + compatible = "socionext,uniphier-pxs2-usb3-ssphy"; + reg = <0x310 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 14>, <&sys_clk 18>; + reset-names = "link", "phy"; + resets = <&sys_rst 14>, <&sys_rst 18>; + vbus-supply = <&usb0_vbus1>; + }; + }; + + usb1: usb@65c00000 { + compatible = "socionext,uniphier-dwc3", "snps,dwc3"; + status = "disabled"; + reg = <0x65c00000 0xcd00>; + interrupt-names = "host", "peripheral"; + interrupts = <0 137 4>, <0 138 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>; + clock-names = "ref", "bus_early", "suspend"; + clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>; + resets = <&usb1_rst 15>; + phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>; + dr_mode = "host"; + }; + + usb-glue@65d00000 { + compatible = "socionext,uniphier-pxs2-dwc3-glue", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x65d00000 0x400>; + + usb1_rst: reset@0 { + compatible = "socionext,uniphier-pxs2-usb3-reset"; + reg = <0x0 0x4>; + #reset-cells = <1>; + clock-names = "link"; + clocks = <&sys_clk 15>; + reset-names = "link"; + resets = <&sys_rst 15>; + }; + + usb1_vbus0: regulator@100 { + compatible = "socionext,uniphier-pxs2-usb3-regulator"; + reg = <0x100 0x10>; + clock-names = "link"; + clocks = <&sys_clk 15>; + reset-names = "link"; + resets = <&sys_rst 15>; + }; + + usb1_vbus1: regulator@110 { + compatible = "socionext,uniphier-pxs2-usb3-regulator"; + reg = <0x110 0x10>; + clock-names = "link"; + clocks = <&sys_clk 15>; + reset-names = "link"; + resets = <&sys_rst 15>; + }; + + usb1_hsphy0: hs-phy@200 { + compatible = "socionext,uniphier-pxs2-usb3-hsphy"; + reg = <0x200 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 15>, <&sys_clk 20>; + reset-names = "link", "phy"; + resets = <&sys_rst 15>, <&sys_rst 20>; + vbus-supply = <&usb1_vbus0>; + }; + + usb1_hsphy1: hs-phy@210 { + compatible = "socionext,uniphier-pxs2-usb3-hsphy"; + reg = <0x210 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 15>, <&sys_clk 20>; + reset-names = "link", "phy"; + resets = <&sys_rst 15>, <&sys_rst 20>; + vbus-supply = <&usb1_vbus1>; + }; + + usb1_ssphy0: ss-phy@300 { + compatible = "socionext,uniphier-pxs2-usb3-ssphy"; + reg = <0x300 0x10>; + #phy-cells = <0>; + clock-names = "link", "phy"; + clocks = <&sys_clk 15>, <&sys_clk 21>; + reset-names = "link", "phy"; + resets = <&sys_rst 15>, <&sys_rst 21>; + vbus-supply = <&usb1_vbus0>; + }; + }; + nand: nand@68000000 { compatible = "socionext,uniphier-denali-nand-v5b"; status = "disabled"; @@ -531,7 +767,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/dts/src/arm/uniphier-sld8-ref.dts b/dts/src/arm/uniphier-sld8-ref.dts index fe386fa2ea..01bf94c6b9 100644 --- a/dts/src/arm/uniphier-sld8-ref.dts +++ b/dts/src/arm/uniphier-sld8-ref.dts @@ -63,6 +63,10 @@ status = "okay"; }; +&sd { + status = "okay"; +}; + &usb0 { status = "okay"; }; diff --git a/dts/src/arm/uniphier-sld8.dtsi b/dts/src/arm/uniphier-sld8.dtsi index e9b9b4f3c5..f7fcf6b459 100644 --- a/dts/src/arm/uniphier-sld8.dtsi +++ b/dts/src/arm/uniphier-sld8.dtsi @@ -63,6 +63,17 @@ cache-level = <2>; }; + spi: spi@54006000 { + compatible = "socionext,uniphier-scssi"; + status = "disabled"; + reg = <0x54006000 0x100>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; + clocks = <&peri_clk 11>; + resets = <&peri_rst 11>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; @@ -228,6 +239,40 @@ }; }; + sd: sdhc@5a400000 { + compatible = "socionext,uniphier-sd-v2.91"; + status = "disabled"; + reg = <0x5a400000 0x200>; + interrupts = <0 76 4>; + pinctrl-names = "default", "uhs"; + pinctrl-0 = <&pinctrl_sd>; + pinctrl-1 = <&pinctrl_sd_uhs>; + clocks = <&mio_clk 0>; + reset-names = "host", "bridge"; + resets = <&mio_rst 0>, <&mio_rst 3>; + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + }; + + emmc: sdhc@5a500000 { + compatible = "socionext,uniphier-sd-v2.91"; + status = "disabled"; + reg = <0x5a500000 0x200>; + interrupts = <0 78 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; + clocks = <&mio_clk 1>; + reset-names = "host", "bridge", "hw"; + resets = <&mio_rst 1>, <&mio_rst 4>, <&mio_rst 6>; + bus-width = <8>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + non-removable; + }; + usb0: usb@5a800100 { compatible = "socionext,uniphier-ehci", "generic-ehci"; status = "disabled"; @@ -351,7 +396,8 @@ interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand2cs>; - clocks = <&sys_clk 2>; + clock-names = "nand", "nand_x", "ecc"; + clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; }; }; diff --git a/dts/src/arm/versatile-ab.dts b/dts/src/arm/versatile-ab.dts index 5f61d36090..6f4f60ba54 100644 --- a/dts/src/arm/versatile-ab.dts +++ b/dts/src/arm/versatile-ab.dts @@ -373,7 +373,7 @@ clock-names = "apb_pclk"; }; - ssp@101f4000 { + spi@101f4000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x101f4000 0x1000>; interrupts = <11>; diff --git a/dts/src/arm/vf500.dtsi b/dts/src/arm/vf500.dtsi index bbff0115e2..76a0949df4 100644 --- a/dts/src/arm/vf500.dtsi +++ b/dts/src/arm/vf500.dtsi @@ -1,43 +1,6 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2013 Freescale Semiconductor, Inc. #include "vfxxx.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/dts/src/arm/vf610-twr.dts b/dts/src/arm/vf610-twr.dts index 6be7a828ae..59fceea880 100644 --- a/dts/src/arm/vf610-twr.dts +++ b/dts/src/arm/vf610-twr.dts @@ -1,43 +1,6 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2013 Freescale Semiconductor, Inc. /dts-v1/; #include "vf610.dtsi" diff --git a/dts/src/arm/vf610-zii-cfu1.dts b/dts/src/arm/vf610-zii-cfu1.dts index 37777cf22e..b76c3d0413 100644 --- a/dts/src/arm/vf610-zii-cfu1.dts +++ b/dts/src/arm/vf610-zii-cfu1.dts @@ -66,6 +66,15 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + + sff: sfp { + compatible = "sff,sff"; + pinctrl-0 = <&pinctrl_optical>; + pinctrl-names = "default"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; + tx-disable-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + }; }; &adc0 { @@ -113,6 +122,8 @@ non-removable; no-1-8-v; keep-power-in-suspend; + no-sdio; + no-sd; status = "okay"; }; @@ -120,6 +131,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; + no-sdio; status = "okay"; }; @@ -170,6 +182,14 @@ label = "eth_cu_1000_3"; }; + port@5 { + reg = <5>; + label = "eth_fc_1000_1"; + phy-mode = "1000base-x"; + managed = "in-band-status"; + sfp = <&sff>; + }; + port@6 { reg = <6>; label = "cpu"; @@ -289,6 +309,16 @@ >; }; + pinctrl_optical: optical-grp { + fsl,pins = < + /* SFF SD input */ + VF610_PAD_PTE27__GPIO_132 0x3061 + + /* SFF Transmit disable output */ + VF610_PAD_PTE13__GPIO_118 0x3043 + >; + }; + pinctrl_switch: switch-grp { fsl,pins = < VF610_PAD_PTB28__GPIO_98 0x3061 diff --git a/dts/src/arm/vf610-zii-dev-rev-c.dts b/dts/src/arm/vf610-zii-dev-rev-c.dts index 0b1e94c6f2..6f4a5602ce 100644 --- a/dts/src/arm/vf610-zii-dev-rev-c.dts +++ b/dts/src/arm/vf610-zii-dev-rev-c.dts @@ -200,6 +200,13 @@ phy-handle = <&switch1phy4>; }; + port@9 { + reg = <9>; + label = "sff2"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sff2>; + }; switch1port10: port@10 { reg = <10>; @@ -245,6 +252,22 @@ #size-cells = <0>; }; }; + + sff2: sff2 { + /* lower */ + compatible = "sff,sff"; + i2c-bus = <&sff2_i2c>; + los-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; + }; + + sff3: sff3 { + /* upper */ + compatible = "sff,sff"; + i2c-bus = <&sff3_i2c>; + los-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + }; }; &dspi0 { @@ -329,13 +352,6 @@ interrupts = <23 IRQ_TYPE_EDGE_FALLING>; gpio-controller; interrupt-controller; - - enet_swr_en { - gpio-hog; - gpios = <0 GPIO_ACTIVE_HIGH>; - output-high; - line-name = "enet-swr-en"; - }; }; /* @@ -378,26 +394,16 @@ reg = <0>; }; - i2c@1 { + sff2_i2c: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; - - sfp2: at24c04@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - }; }; - i2c@2 { + sff3_i2c: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; - - sfp3: at24c04@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - }; }; i2c@3 { diff --git a/dts/src/arm/vf610.dtsi b/dts/src/arm/vf610.dtsi index 80fef182c6..7fd39817f8 100644 --- a/dts/src/arm/vf610.dtsi +++ b/dts/src/arm/vf610.dtsi @@ -1,43 +1,7 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2013 Freescale Semiconductor, Inc. + #include "vf500.dtsi" diff --git a/dts/src/arm/vfxxx.dtsi b/dts/src/arm/vfxxx.dtsi index d392794d9c..028e0ec30e 100644 --- a/dts/src/arm/vfxxx.dtsi +++ b/dts/src/arm/vfxxx.dtsi @@ -1,43 +1,6 @@ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2013 Freescale Semiconductor, Inc. #include "vf610-pinfunc.h" #include <dt-bindings/clock/vf610-clock.h> @@ -190,7 +153,7 @@ status = "disabled"; }; - dspi0: dspi0@4002c000 { + dspi0: spi@4002c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-dspi"; @@ -205,7 +168,7 @@ status = "disabled"; }; - dspi1: dspi1@4002d000 { + dspi1: spi@4002d000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-dspi"; @@ -339,7 +302,7 @@ status = "disabled"; }; - qspi0: quadspi@40044000 { + qspi0: spi@40044000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-qspi"; @@ -569,7 +532,7 @@ status = "disabled"; }; - dspi2: dspi2@400ac000 { + dspi2: spi@400ac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-dspi"; @@ -584,7 +547,7 @@ status = "disabled"; }; - dspi3: dspi3@400ad000 { + dspi3: spi@400ad000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-dspi"; @@ -665,7 +628,7 @@ status = "disabled"; }; - qspi1: quadspi@400c4000 { + qspi1: spi@400c4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-qspi"; diff --git a/dts/src/arm/zynq-zc702.dts b/dts/src/arm/zynq-zc702.dts index cc5a3dc2b4..27cd6cb52f 100644 --- a/dts/src/arm/zynq-zc702.dts +++ b/dts/src/arm/zynq-zc702.dts @@ -174,17 +174,17 @@ #address-cells = <1>; #size-cells = <0>; reg = <7>; - hwmon@52 { + hwmon@34 { compatible = "ti,ucd9248"; - reg = <52>; + reg = <0x34>; }; - hwmon@53 { + hwmon@35 { compatible = "ti,ucd9248"; - reg = <53>; + reg = <0x35>; }; - hwmon@54 { + hwmon@36 { compatible = "ti,ucd9248"; - reg = <54>; + reg = <0x36>; }; }; }; diff --git a/dts/src/arm/zynq-zc770-xm010.dts b/dts/src/arm/zynq-zc770-xm010.dts index 0e1bfdd342..0dd352289a 100644 --- a/dts/src/arm/zynq-zc770-xm010.dts +++ b/dts/src/arm/zynq-zc770-xm010.dts @@ -68,7 +68,7 @@ status = "okay"; num-cs = <4>; is-decoded-cs = <0>; - flash@0 { + flash@1 { compatible = "sst25wf080", "jedec,spi-nor"; reg = <1>; spi-max-frequency = <1000000>; diff --git a/dts/src/arm/zynq-zc770-xm013.dts b/dts/src/arm/zynq-zc770-xm013.dts index 651913f1af..4ae2c85df3 100644 --- a/dts/src/arm/zynq-zc770-xm013.dts +++ b/dts/src/arm/zynq-zc770-xm013.dts @@ -62,7 +62,7 @@ status = "okay"; num-cs = <4>; is-decoded-cs = <0>; - eeprom: eeprom@0 { + eeprom: eeprom@2 { at25,byte-len = <8192>; at25,addr-mode = <2>; at25,page-size = <32>; |