diff options
Diffstat (limited to 'dts/src/cris')
| -rw-r--r-- | dts/src/cris/artpec3.dtsi | 47 | ||||
| -rw-r--r-- | dts/src/cris/dev88.dts | 68 | ||||
| -rw-r--r-- | dts/src/cris/etraxfs.dtsi | 47 | ||||
| -rw-r--r-- | dts/src/cris/p1343.dts | 77 |
4 files changed, 0 insertions, 239 deletions
diff --git a/dts/src/cris/artpec3.dtsi b/dts/src/cris/artpec3.dtsi deleted file mode 100644 index f857300f4e..0000000000 --- a/dts/src/cris/artpec3.dtsi +++ /dev/null @@ -1,47 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/ { - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "axis,crisv32"; - reg = <0>; - }; - }; - - soc { - compatible = "simple-bus"; - model = "artpec3"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - intc: interrupt-controller { - compatible = "axis,crisv32-intc"; - reg = <0xb002a000 0x1000>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - gio: gpio@b0020000 { - compatible = "axis,artpec3-gio"; - reg = <0xb0020000 0x1000>; - interrupts = <61>; - gpio-controller; - #gpio-cells = <3>; - }; - - serial@b003e000 { - compatible = "axis,etraxfs-uart"; - reg = <0xb003e000 0x1000>; - interrupts = <64>; - status = "disabled"; - }; - }; -}; diff --git a/dts/src/cris/dev88.dts b/dts/src/cris/dev88.dts deleted file mode 100644 index 415270ea53..0000000000 --- a/dts/src/cris/dev88.dts +++ /dev/null @@ -1,68 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> - -/include/ "etraxfs.dtsi" - -/ { - model = "Axis 88 Developer Board"; - compatible = "axis,dev88"; - - aliases { - serial0 = &uart0; - }; - - soc { - uart0: serial@b00260000 { - status = "okay"; - }; - }; - - spi { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - gpio-sck = <&gio 1 0 0xd>; - gpio-miso = <&gio 4 0 0xd>; - gpio-mosi = <&gio 0 0 0xd>; - cs-gpios = <&gio 3 0 0xd>; - num-chipselects = <1>; - - temp-sensor@0 { - compatible = "ti,lm70"; - reg = <0>; - - spi-max-frequency = <100000>; - }; - }; - - i2c { - compatible = "i2c-gpio"; - gpios = <&gio 5 0 0xd>, <&gio 6 0 0xd>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - - rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - }; - - leds { - compatible = "gpio-leds"; - - network { - label = "network"; - gpios = <&gio 2 GPIO_ACTIVE_LOW 0xa>; - }; - - status { - label = "status"; - gpios = <&gio 3 GPIO_ACTIVE_LOW 0xa>; - linux,default-trigger = "heartbeat"; - }; - }; -}; diff --git a/dts/src/cris/etraxfs.dtsi b/dts/src/cris/etraxfs.dtsi deleted file mode 100644 index 4513edf725..0000000000 --- a/dts/src/cris/etraxfs.dtsi +++ /dev/null @@ -1,47 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/ { - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - model = "axis,crisv32"; - reg = <0>; - }; - }; - - soc { - compatible = "simple-bus"; - model = "etraxfs"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - intc: interrupt-controller { - compatible = "axis,crisv32-intc"; - reg = <0xb001c000 0x1000>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - gio: gpio@b001a000 { - compatible = "axis,etraxfs-gio"; - reg = <0xb001a000 0x1000>; - interrupts = <50>; - gpio-controller; - #gpio-cells = <3>; - }; - - serial@b00260000 { - compatible = "axis,etraxfs-uart"; - reg = <0xb0026000 0x1000>; - interrupts = <68>; - status = "disabled"; - }; - }; -}; diff --git a/dts/src/cris/p1343.dts b/dts/src/cris/p1343.dts deleted file mode 100644 index 6030561d45..0000000000 --- a/dts/src/cris/p1343.dts +++ /dev/null @@ -1,77 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/include/ "artpec3.dtsi" - -/ { - model = "Axis P1343 Network Camera"; - compatible = "axis,p1343"; - - aliases { - serial0 = &uart0; - }; - - soc { - uart0: serial@b003e000 { - status = "okay"; - }; - }; - - i2c { - compatible = "i2c-gpio"; - gpios = <&gio 3 0 0xa>, <&gio 2 0 0xa>; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - - rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - }; - - leds { - compatible = "gpio-leds"; - - status_green { - label = "status:green"; - gpios = <&gio 0 GPIO_ACTIVE_LOW 0xc>; - linux,default-trigger = "heartbeat"; - }; - - status_red { - label = "status:red"; - gpios = <&gio 1 GPIO_ACTIVE_LOW 0xc>; - }; - - network_green { - label = "network:green"; - gpios = <&gio 2 GPIO_ACTIVE_LOW 0xc>; - }; - - network_red { - label = "network:red"; - gpios = <&gio 3 GPIO_ACTIVE_LOW 0xc>; - }; - - power_red { - label = "power:red"; - gpios = <&gio 4 GPIO_ACTIVE_LOW 0xc>; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - activity-button@0 { - label = "Activity Button"; - linux,code = <KEY_FN>; - gpios = <&gio 13 GPIO_ACTIVE_LOW 0xd>; - }; - }; -}; |