diff options
Diffstat (limited to 'dts/src/mips/ingenic/cu1000-neo.dts')
| -rw-r--r-- | dts/src/mips/ingenic/cu1000-neo.dts | 114 |
1 files changed, 56 insertions, 58 deletions
diff --git a/dts/src/mips/ingenic/cu1000-neo.dts b/dts/src/mips/ingenic/cu1000-neo.dts index 03abd94acd..22a1066d63 100644 --- a/dts/src/mips/ingenic/cu1000-neo.dts +++ b/dts/src/mips/ingenic/cu1000-neo.dts @@ -7,8 +7,8 @@ #include <dt-bindings/interrupt-controller/irq.h> / { - compatible = "yna,cu1000-neo", "ingenic,x1000"; - model = "YSH & ATIL General Board CU Neo"; + compatible = "yna,cu1000-neo", "ingenic,x1000e"; + model = "YSH & ATIL General Board CU1000-Neo"; aliases { serial2 = &uart2; @@ -23,20 +23,19 @@ reg = <0x0 0x04000000>; }; + leds { + compatible = "gpio-leds"; + led-0 { + gpios = <&gpb 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + }; + }; + wlan_pwrseq: msc1-pwrseq { compatible = "mmc-pwrseq-simple"; - clocks = <&lpoclk>; - clock-names = "ext_clock"; - reset-gpios = <&gpc 17 GPIO_ACTIVE_LOW>; post-power-on-delay-ms = <200>; - - lpoclk: ap6212a { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; }; }; @@ -53,6 +52,13 @@ ingenic,pwm-channels-mask = <0xfa>; }; +&uart2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart2>; +}; + &i2c0 { status = "okay"; @@ -61,43 +67,15 @@ pinctrl-names = "default"; pinctrl-0 = <&pins_i2c0>; - ads7830@48 { + ads7830: adc@48 { compatible = "ti,ads7830"; reg = <0x48>; }; }; -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pins_uart2>; - - status = "okay"; -}; - -&mac { - phy-mode = "rmii"; - phy-handle = <&lan8720a>; - - pinctrl-names = "default"; - pinctrl-0 = <&pins_mac>; - - snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */ - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; - - status = "okay"; -}; - -&mdio { +&msc0 { status = "okay"; - lan8720a: ethernet-phy@0 { - compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22"; - reg = <0>; - }; -}; - -&msc0 { bus-width = <8>; max-frequency = <50000000>; @@ -105,26 +83,23 @@ pinctrl-0 = <&pins_msc0>; non-removable; - - status = "okay"; }; &msc1 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; bus-width = <4>; max-frequency = <50000000>; pinctrl-names = "default"; pinctrl-0 = <&pins_msc1>; - #address-cells = <1>; - #size-cells = <0>; - non-removable; mmc-pwrseq = <&wlan_pwrseq>; - status = "okay"; - ap6212a: wifi@1 { compatible = "brcm,bcm4329-fmac"; reg = <1>; @@ -137,23 +112,40 @@ }; }; -&pinctrl { - pins_i2c0: i2c0 { - function = "i2c0"; - groups = "i2c0-data"; - bias-disable; +&mac { + status = "okay"; + + phy-mode = "rmii"; + phy-handle = <&lan8720a>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_mac>; + + snps,reset-gpio = <&gpc 23 GPIO_ACTIVE_LOW>; /* PC23 */ + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; +}; + +&mdio { + status = "okay"; + + lan8720a: ethernet-phy@0 { + compatible = "ethernet-phy-id0007.c0f0", "ethernet-phy-ieee802.3-c22"; + reg = <0>; }; +}; +&pinctrl { pins_uart2: uart2 { function = "uart2"; groups = "uart2-data-d"; - bias-disable; + bias-pull-up; }; - pins_mac: mac { - function = "mac"; - groups = "mac"; - bias-disable; + pins_i2c0: i2c0 { + function = "i2c0"; + groups = "i2c0-data"; + bias-pull-up; }; pins_msc0: msc0 { @@ -167,4 +159,10 @@ groups = "mmc1-1bit", "mmc1-4bit"; bias-disable; }; + + pins_mac: mac { + function = "mac"; + groups = "mac"; + bias-disable; + }; }; |