diff options
Diffstat (limited to 'dts/src/mips/ralink/mt7621.dtsi')
| -rw-r--r-- | dts/src/mips/ralink/mt7621.dtsi | 118 |
1 files changed, 87 insertions, 31 deletions
diff --git a/dts/src/mips/ralink/mt7621.dtsi b/dts/src/mips/ralink/mt7621.dtsi index ee46ace0bc..6e95e6f19a 100644 --- a/dts/src/mips/ralink/mt7621.dtsi +++ b/dts/src/mips/ralink/mt7621.dtsi @@ -33,11 +33,6 @@ compatible = "mti,cpu-interrupt-controller"; }; - aliases { - serial0 = &uartlite; - }; - - mmc_fixed_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "mmc_power"; @@ -75,9 +70,10 @@ "250m", "270m"; }; - wdt: wdt@100 { + wdt: watchdog@100 { compatible = "mediatek,mt7621-wdt"; reg = <0x100 0x100>; + mediatek,sysctl = <&sysc>; }; gpio: gpio@600 { @@ -110,24 +106,67 @@ pinctrl-0 = <&i2c_pins>; }; - memc: syscon@5000 { + memc: memory-controller@5000 { compatible = "mediatek,mt7621-memc", "syscon"; reg = <0x5000 0x1000>; }; - uartlite: uartlite@c00 { + serial0: serial@c00 { compatible = "ns16550a"; reg = <0xc00 0x100>; + reg-io-width = <4>; + reg-shift = <2>; + clocks = <&sysc MT7621_CLK_UART1>; - clock-names = "uart1"; interrupt-parent = <&gic>; interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>; + no-loopback-test; + + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + }; + + serial1: serial@d00 { + compatible = "ns16550a"; + reg = <0xd00 0x100>; + + reg-io-width = <4>; reg-shift = <2>; + + clocks = <&sysc MT7621_CLK_UART2>; + + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 27 IRQ_TYPE_LEVEL_HIGH>; + + no-loopback-test; + + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + + status = "disabled"; + }; + + serial2: serial@e00 { + compatible = "ns16550a"; + reg = <0xe00 0x100>; + reg-io-width = <4>; + reg-shift = <2>; + + clocks = <&sysc MT7621_CLK_UART3>; + + interrupt-parent = <&gic>; + interrupts = <GIC_SHARED 28 IRQ_TYPE_LEVEL_HIGH>; + no-loopback-test; + + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + + status = "disabled"; }; spi0: spi@b00 { @@ -236,7 +275,7 @@ }; }; - sdhci: sdhci@1e130000 { + mmc: mmc@1e130000 { status = "disabled"; compatible = "mediatek,mt7620-mmc"; @@ -262,12 +301,15 @@ interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>; }; - xhci: xhci@1e1c0000 { - compatible = "mediatek,mt8173-xhci"; + usb: usb@1e1c0000 { + compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci"; reg = <0x1e1c0000 0x1000 0x1e1d0700 0x0100>; reg-names = "mac", "ippc"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&sysc MT7621_CLK_XTAL>; clock-names = "sys_ck"; @@ -305,14 +347,13 @@ compatible = "mediatek,mt7621-eth"; reg = <0x1e100000 0x10000>; - clocks = <&sysc MT7621_CLK_FE>, - <&sysc MT7621_CLK_ETH>; + clocks = <&sysc MT7621_CLK_FE>, <&sysc MT7621_CLK_ETH>; clock-names = "fe", "ethif"; #address-cells = <1>; #size-cells = <0>; - resets = <&sysc MT7621_RST_FE &sysc MT7621_RST_ETH>; + resets = <&sysc MT7621_RST_FE>, <&sysc MT7621_RST_ETH>; reset-names = "fe", "eth"; interrupt-parent = <&gic>; @@ -338,23 +379,27 @@ gmac1: mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; - status = "off"; - phy-mode = "rgmii-rxid"; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; }; mdio: mdio-bus { #address-cells = <1>; #size-cells = <0>; - switch0: switch0@0 { + switch0: switch@1f { compatible = "mediatek,mt7621"; - reg = <0>; + reg = <0x1f>; mediatek,mcm; resets = <&sysc MT7621_RST_MCM>; reset-names = "mcm"; interrupt-controller; #interrupt-cells = <1>; - interrupt-parent = <&gic>; interrupts = <GIC_SHARED 23 IRQ_TYPE_LEVEL_HIGH>; ports { @@ -362,38 +407,49 @@ #size-cells = <0>; port@0 { - status = "off"; + status = "disabled"; reg = <0>; - label = "lan0"; + label = "swp0"; }; port@1 { - status = "off"; + status = "disabled"; reg = <1>; - label = "lan1"; + label = "swp1"; }; port@2 { - status = "off"; + status = "disabled"; reg = <2>; - label = "lan2"; + label = "swp2"; }; port@3 { - status = "off"; + status = "disabled"; reg = <3>; - label = "lan3"; + label = "swp3"; }; port@4 { - status = "off"; + status = "disabled"; reg = <4>; - label = "lan4"; + label = "swp4"; + }; + + port@5 { + reg = <5>; + ethernet = <&gmac1>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; }; port@6 { reg = <6>; - label = "cpu"; ethernet = <&gmac0>; phy-mode = "trgmii"; |