diff options
Diffstat (limited to 'dts/src')
418 files changed, 26989 insertions, 1940 deletions
diff --git a/dts/src/arc/haps_hs.dts b/dts/src/arc/haps_hs.dts index 1ebfa04649..44bc522fde 100644 --- a/dts/src/arc/haps_hs.dts +++ b/dts/src/arc/haps_hs.dts @@ -62,5 +62,35 @@ #interrupt-cells = <1>; interrupts = <20>; }; + + virtio0: virtio@f0100000 { + compatible = "virtio,mmio"; + reg = <0xf0100000 0x2000>; + interrupts = <31>; + }; + + virtio1: virtio@f0102000 { + compatible = "virtio,mmio"; + reg = <0xf0102000 0x2000>; + interrupts = <32>; + }; + + virtio2: virtio@f0104000 { + compatible = "virtio,mmio"; + reg = <0xf0104000 0x2000>; + interrupts = <33>; + }; + + virtio3: virtio@f0106000 { + compatible = "virtio,mmio"; + reg = <0xf0106000 0x2000>; + interrupts = <34>; + }; + + virtio4: virtio@f0108000 { + compatible = "virtio,mmio"; + reg = <0xf0108000 0x2000>; + interrupts = <35>; + }; }; }; diff --git a/dts/src/arc/hsdk.dts b/dts/src/arc/hsdk.dts index 9a45cb0930..bfc7f5f5d6 100644 --- a/dts/src/arc/hsdk.dts +++ b/dts/src/arc/hsdk.dts @@ -8,6 +8,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/reset/snps,hsdk-reset.h> / { @@ -252,6 +253,19 @@ dma-coherent; }; + spi0: spi@20000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x20000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <16>; + num-cs = <2>; + reg-io-width = <4>; + clocks = <&input_clk>; + cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>, + <&creg_gpio 1 GPIO_ACTIVE_LOW>; + }; + creg_gpio: gpio@14b0 { compatible = "snps,creg-gpio-hsdk"; reg = <0x14b0 0x4>; diff --git a/dts/src/arm/am335x-baltos-ir2110.dts b/dts/src/arm/am335x-baltos-ir2110.dts index 49e46baf95..386d5f8997 100644 --- a/dts/src/arm/am335x-baltos-ir2110.dts +++ b/dts/src/arm/am335x-baltos-ir2110.dts @@ -30,6 +30,12 @@ AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ >; }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7) /* MMC1 CD */ + >; + }; }; &uart1 { @@ -65,7 +71,13 @@ }; &cpsw_emac1 { - phy-mode = "rgmii-txid"; + phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; phy-handle = <&phy1>; }; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; +}; diff --git a/dts/src/arm/am335x-baltos-ir3220.dts b/dts/src/arm/am335x-baltos-ir3220.dts index 9e88bc2f64..b0df7256db 100644 --- a/dts/src/arm/am335x-baltos-ir3220.dts +++ b/dts/src/arm/am335x-baltos-ir3220.dts @@ -51,6 +51,12 @@ AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */ >; }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7) /* MMC1 CD */ + >; + }; }; &uart1 { @@ -107,7 +113,13 @@ }; &cpsw_emac1 { - phy-mode = "rgmii-txid"; + phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; phy-handle = <&phy1>; }; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; +}; diff --git a/dts/src/arm/am335x-baltos-ir5221.dts b/dts/src/arm/am335x-baltos-ir5221.dts index 28aa004229..d6aa46e870 100644 --- a/dts/src/arm/am335x-baltos-ir5221.dts +++ b/dts/src/arm/am335x-baltos-ir5221.dts @@ -60,6 +60,11 @@ >; }; + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7) /* MMC1 CD */ + >; + }; }; &uart1 { @@ -125,7 +130,7 @@ }; &cpsw_emac1 { - phy-mode = "rgmii-txid"; + phy-mode = "rgmii-id"; dual_emac_res_vlan = <2>; phy-handle = <&phy1>; }; @@ -136,3 +141,9 @@ status = "okay"; }; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>; +}; diff --git a/dts/src/arm/am335x-pcm-953.dtsi b/dts/src/arm/am335x-pcm-953.dtsi index d774bf7672..9bfa032bca 100644 --- a/dts/src/arm/am335x-pcm-953.dtsi +++ b/dts/src/arm/am335x-pcm-953.dtsi @@ -36,15 +36,13 @@ pinctrl-names = "default"; pinctrl-0 = <&user_leds_pins>; - green { - label = "green:user"; + user-led0 { gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; linux,default-trigger = "gpio"; default-state = "on"; }; - yellow { - label = "yellow:user"; + user-led1 { gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; linux,default-trigger = "gpio"; default-state = "on"; @@ -135,22 +133,6 @@ &davinci_mdio { phy1: ethernet-phy@2 { reg = <2>; - - /* Register 260 (104h) – RGMII Clock and Control Pad Skew */ - rxc-skew-ps = <1400>; - rxdv-skew-ps = <0>; - txc-skew-ps = <1400>; - txen-skew-ps = <0>; - /* Register 261 (105h) – RGMII RX Data Pad Skew */ - rxd3-skew-ps = <0>; - rxd2-skew-ps = <0>; - rxd1-skew-ps = <0>; - rxd0-skew-ps = <0>; - /* Register 262 (106h) – RGMII TX Data Pad Skew */ - txd3-skew-ps = <0>; - txd2-skew-ps = <0>; - txd1-skew-ps = <0>; - txd0-skew-ps = <0>; }; }; diff --git a/dts/src/arm/am335x-phycore-rdk.dts b/dts/src/arm/am335x-phycore-rdk.dts index 672daf9d36..43907d03e6 100644 --- a/dts/src/arm/am335x-phycore-rdk.dts +++ b/dts/src/arm/am335x-phycore-rdk.dts @@ -10,6 +10,10 @@ #include "am335x-pcm-953.dtsi" /* SoM */ +&gpmc { + status = "okay"; +}; + &i2c_eeprom { status = "okay"; }; diff --git a/dts/src/arm/am335x-phycore-som.dtsi b/dts/src/arm/am335x-phycore-som.dtsi index ee6b1cb27c..3d0672b53d 100644 --- a/dts/src/arm/am335x-phycore-som.dtsi +++ b/dts/src/arm/am335x-phycore-som.dtsi @@ -27,17 +27,13 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - regulators { - compatible = "simple-bus"; - - vcc5v: fixedregulator0 { - compatible = "regulator-fixed"; - regulator-name = "vcc5v"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; - regulator-always-on; - }; + vcc5v: fixedregulator0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; }; }; @@ -50,6 +46,33 @@ status = "okay"; }; +/* EMMC */ +&am33xx_pinmux { + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + vmmc-supply = <&vmmc_reg>; + bus-width = <8>; + ti,non-removable; + status = "disabled"; +}; + /* Ethernet */ &am33xx_pinmux { ethernet0_pins: pinmux_ethernet0 { @@ -164,7 +187,7 @@ }; &gpmc { - status = "okay"; + status = "disabled"; pinctrl-names = "default"; pinctrl-0 = <&nandflash_pins>; ranges = <0 0 0x08000000 0x1000000>; /* CS0: NAND */ diff --git a/dts/src/arm/am335x-regor-rdk.dts b/dts/src/arm/am335x-regor-rdk.dts new file mode 100644 index 0000000000..66a1360b83 --- /dev/null +++ b/dts/src/arm/am335x-regor-rdk.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Phytec Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + * + */ + +/dts-v1/; + +#include "am335x-phycore-som.dtsi" +#include "am335x-regor.dtsi" + +/* SoM */ +&gpmc { + status = "okay"; +}; + +&i2c_eeprom { + status = "okay"; +}; + +&serial_flash { + status = "okay"; +}; diff --git a/dts/src/arm/am335x-regor.dtsi b/dts/src/arm/am335x-regor.dtsi new file mode 100644 index 0000000000..5aff02a957 --- /dev/null +++ b/dts/src/arm/am335x-regor.dtsi @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Phytec Messtechnik GmbH + * Author: Teresa Remmet <t.remmet@phytec.de> + * + */ + +/ { + model = "Phytec AM335x phyBOARD-REGOR"; + compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx"; + + vcc3v3: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + /* User IO */ + user_leds: user_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_pins>; + + run_stop-led { + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + + error-led { + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + }; +}; + +/* User Leds */ +&am33xx_pinmux { + user_leds_pins: pinmux_user_leds { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* lcd_hsync.gpio2_22 */ + AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* mcasp0_fsx.gpio3_15 */ + >; + }; +}; + +/* CAN Busses */ +&am33xx_pinmux { + dcan1_pins: pinmux_dcan1 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */ + >; + }; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + status = "okay"; +}; + +/* Ethernet */ +&am33xx_pinmux { + ethernet1_pins: pinmux_ethernet1 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1) /* gpmc_a2.mii2_txd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1) /* gpmc_a3.mii2_txd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1) /* gpmc_a4.mii2_txd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1) /* gpmc_a5.mii2_txd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a6.mii2_txclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a7.mii2_rxclk */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a8.mii2_rxd3 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a9.mii2_rxd2 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a10.mii2_rxd1 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a11.mii2_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_wpn.mii2_rxerr */ + AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_ben1.mii2_col */ + >; + }; +}; + +&cpsw_emac1 { + phy-handle = <&phy1>; + phy-mode = "mii"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mac { + slaves = <2>; + pinctrl-names = "default"; + pinctrl-0 = <ðernet0_pins ðernet1_pins>; + dual_emac = <1>; +}; + +/* GPIOs */ +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&user_gpios_pins>; + + user_gpios_pins: pinmux_user_gpios { + pinctrl-single,pins = < + /* DIGIN 1-4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7) /* gpmc_ad11.gpio0_27 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT, MUX_MODE7) /* gpmc_ad10.gpio0_26 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT, MUX_MODE7) /* gpmc_ad9.gpio0_23 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT, MUX_MODE7) /* gpmc_ad8.gpio0_22 */ + /* DIGOUT 1-4 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad15.gpio1_15 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad14.gpio1_14 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad13.gpio1_13 */ + AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE7) /* gpmc_ad12.gpio1_12 */ + >; + }; +}; + +/* MMC */ +&am33xx_pinmux { + mmc1_pins: pinmux_mmc1 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */ + >; + }; +}; + +&mmc1 { + vmmc-supply = <&vcc3v3>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* RTC */ +&i2c_rtc { + status = "okay"; +}; + +/* UARTs */ +&am33xx_pinmux { + uart0_pins: pinmux_uart0 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + >; + }; + + uart2_pins: pinmux_uart2 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_tx_clk.uart2_rxd */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_rx_clk.uart2_txd */ + >; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +/* RS485 - UART1 */ +&am33xx_pinmux { + uart1_rs485_pins: pinmux_uart1_rs485_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0) + AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0) + >; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_rs485_pins>; + status = "okay"; + linux,rs485-enabled-at-boot-time; +}; + +/* USB */ +&cppi41dma { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; diff --git a/dts/src/arm/am335x-wega-rdk.dts b/dts/src/arm/am335x-wega-rdk.dts index 2e04f6df82..866b5f0cbf 100644 --- a/dts/src/arm/am335x-wega-rdk.dts +++ b/dts/src/arm/am335x-wega-rdk.dts @@ -10,6 +10,10 @@ #include "am335x-wega.dtsi" /* SoM */ +&gpmc { + status = "okay"; +}; + &i2c_eeprom { status = "okay"; }; diff --git a/dts/src/arm/am335x-wega.dtsi b/dts/src/arm/am335x-wega.dtsi index 67bde56f89..61fc4cd2d1 100644 --- a/dts/src/arm/am335x-wega.dtsi +++ b/dts/src/arm/am335x-wega.dtsi @@ -12,16 +12,12 @@ compatible = "ti,da830-evm-audio"; }; - regulators { - compatible = "simple-bus"; - - vcc3v3: fixedregulator1 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; + vcc3v3: fixedregulator1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; }; }; diff --git a/dts/src/arm/arm-realview-eb.dtsi b/dts/src/arm/arm-realview-eb.dtsi index 610506723e..fe0207b880 100644 --- a/dts/src/arm/arm-realview-eb.dtsi +++ b/dts/src/arm/arm-realview-eb.dtsi @@ -119,6 +119,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x40000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; flash1@44000000 { @@ -126,6 +129,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x44000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; /* SMSC LAN91C111 ethernet with PHY and EEPROM */ diff --git a/dts/src/arm/arm-realview-pb1176.dts b/dts/src/arm/arm-realview-pb1176.dts index cbbb8878da..2625ce66f8 100644 --- a/dts/src/arm/arm-realview-pb1176.dts +++ b/dts/src/arm/arm-realview-pb1176.dts @@ -120,12 +120,18 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x30000000 0x4000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; fpga_flash@38000000 { compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x38000000 0x800000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; /* diff --git a/dts/src/arm/arm-realview-pb11mp.dts b/dts/src/arm/arm-realview-pb11mp.dts index 2015619ca2..c69cf7ddbe 100644 --- a/dts/src/arm/arm-realview-pb11mp.dts +++ b/dts/src/arm/arm-realview-pb11mp.dts @@ -235,6 +235,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x40000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; flash1@44000000 { @@ -242,6 +245,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x44000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; bridge { diff --git a/dts/src/arm/arm-realview-pbx.dtsi b/dts/src/arm/arm-realview-pbx.dtsi index a81e9c2824..09f3f544f3 100644 --- a/dts/src/arm/arm-realview-pbx.dtsi +++ b/dts/src/arm/arm-realview-pbx.dtsi @@ -134,6 +134,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x40000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; flash1@44000000 { @@ -141,6 +144,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x44000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; /* SMSC 9118 ethernet with PHY and EEPROM */ diff --git a/dts/src/arm/armada-370-netgear-rn104.dts b/dts/src/arm/armada-370-netgear-rn104.dts index 9fd1cb9f49..85e2e9e27a 100644 --- a/dts/src/arm/armada-370-netgear-rn104.dts +++ b/dts/src/arm/armada-370-netgear-rn104.dts @@ -143,6 +143,20 @@ }; }; + auxdisplay { + compatible = "hit,hd44780"; + data-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>, + <&gpio1 26 GPIO_ACTIVE_HIGH>, + <&gpio1 27 GPIO_ACTIVE_HIGH>, + <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + rs-gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + rw-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + backlight-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + display-height-chars = <2>; + display-width-chars = <16>; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&backup_button_pin diff --git a/dts/src/arm/aspeed-bmc-facebook-cmm.dts b/dts/src/arm/aspeed-bmc-facebook-cmm.dts index 43aba4071a..d519d307aa 100644 --- a/dts/src/arm/aspeed-bmc-facebook-cmm.dts +++ b/dts/src/arm/aspeed-bmc-facebook-cmm.dts @@ -372,3 +372,11 @@ &adc { status = "okay"; }; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; diff --git a/dts/src/arm/aspeed-bmc-facebook-yamp.dts b/dts/src/arm/aspeed-bmc-facebook-yamp.dts new file mode 100644 index 0000000000..4e09a9cf32 --- /dev/null +++ b/dts/src/arm/aspeed-bmc-facebook-yamp.dts @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Facebook Inc. +/dts-v1/; + +#include "aspeed-g5.dtsi" + +/ { + model = "Facebook YAMP 100 BMC"; + compatible = "facebook,yamp-bmc", "aspeed,ast2500"; + + aliases { + /* + * Override the default uart aliases to avoid breaking + * the legacy applications. + */ + serial0 = &uart5; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS0,9600n8 root=/dev/ram rw"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +/* + * Update reset type to "system" (full chip) to fix warm reboot hang issue + * when reset type is set to default ("soc", gated by reset mask registers). + */ +&wdt1 { + status = "okay"; + aspeed,reset-type = "system"; +}; + +/* + * wdt2 is not used by Yamp. + */ +&wdt2 { + status = "disabled"; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "facebook-bmc-flash-layout.dtsi" + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + use-ncsi; + no-hw-checksum; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; + + i2c-switch@75 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x75>; + }; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&vhub { + status = "okay"; +}; diff --git a/dts/src/arm/aspeed-bmc-inspur-fp5280g2.dts b/dts/src/arm/aspeed-bmc-inspur-fp5280g2.dts new file mode 100644 index 0000000000..628195b66d --- /dev/null +++ b/dts/src/arm/aspeed-bmc-inspur-fp5280g2.dts @@ -0,0 +1,846 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "FP5280G2 BMC"; + compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@9f000000 { + no-map; + reg = <0x9f000000 0x01000000>; /* 16M */ + }; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + coldfire_memory: codefire_memory@9ef00000 { + reg = <0x9ef00000 0x00100000>; + no-map; + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + fsi: gpio-fsi { + compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + memory-region = <&coldfire_memory>; + aspeed,sram = <&sram>; + aspeed,cvic = <&cvic>; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(B, 3)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 0)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(F, 1)>; + }; + + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; + linux,code = <1>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca1 1 GPIO_ACTIVE_LOW>; + linux,code = <2>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; + linux,code = <3>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + fan4-presence { + label = "fan4-presence"; + gpios = <&pca1 4 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan5-presence { + label = "fan5-presence"; + gpios = <&pca1 5 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan6-presence { + label = "fan6-presence"; + gpios = <&pca1 6 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + fan7-presence { + label = "fan7-presence"; + gpios = <&pca1 7 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "power"; + /* TODO: dummy gpio */ + gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>; + }; + + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 15>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, + <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>, + <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>; + }; + +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* Test Point */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart3 { + /* APSS */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>; +}; + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + /* LCD */ + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + label = "fru"; + }; + +}; + +&i2c2 { + status = "okay"; + + tmp112@48 { + compatible = "ti,tmp112"; + reg = <0x48>; + label = "inlet"; + }; + + tmp112@49 { + compatible = "ti,tmp112"; + reg = <0x49>; + label = "outlet"; + }; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tmp112@4a { + compatible = "ti,tmp112"; + reg = <0x4a>; + label = "psu_inlet"; + }; + + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + tmp112@4a { + compatible = "ti,tmp112"; + reg = <0x4a>; + label = "ocp_zone"; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + tmp112@4a { + compatible = "ti,tmp112"; + reg = <0x4a>; + label = "bmc_zone"; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + tmp112@7c { + compatible = "microchip,emc1413"; + reg = <0x7c>; + }; + }; + + }; +}; + +&i2c3 { + /* Riser Card */ + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; +}; + +&i2c5 { + /* vr */ + status = "okay"; +}; + +&i2c6 { + /* bp card */ + status = "okay"; +}; + +&i2c7 { + status = "okay"; + + i2c-switch@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + adm1278@10 { + compatible = "adi,adm1278"; + reg = <0x10>; + }; + + adm1278@13 { + compatible = "adi,adm1278"; + reg = <0x13>; + }; + + adm1278@50 { + compatible = "adi,adm1278"; + reg = <0x50>; + }; + + adm1278@53 { + compatible = "adi,adm1278"; + reg = <0x53>; + }; + + }; + + /*pcie riser*/ + + }; +}; + +&i2c8 { + status = "okay"; + + pca0: pca9555@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + }; + + pca1: pca9555@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca2: pca9555@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca3: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca4: pca9555@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + pca5: pca9555@25 { + compatible = "nxp,pca9555"; + reg = <0x25>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + +}; + +&i2c9 { + /* cpld */ + status = "okay"; +}; + +&i2c10 { + /* hdd bp */ + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + power-supply@58 { + compatible = "pmbus"; + reg = <0x58>; + }; + + power-supply@5a { + compatible = "pmbus"; + reg = <0x5a>; + }; +}; + +&i2c12 { + /* odcc */ + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&gpio { + pin_gpio_b7 { + gpio-hog; + gpios = <ASPEED_GPIO(B,7) GPIO_ACTIVE_LOW>; + output-high; + line-name = "BMC_INIT_OK"; + }; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&ibt { + status = "okay"; + +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default + &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default + &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default + &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default + &pinctrl_adc14_default &pinctrl_adc15_default>; +}; + +&vhub { + status = "okay"; +}; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default + &pinctrl_pwm6_default &pinctrl_pwm7_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>; + }; + + fan@5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>; + }; + + fan@6 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>; + }; + + fan@7 { + reg = <0x07>; + aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>; + }; + +}; + +#include "ibm-power9-dual.dtsi" diff --git a/dts/src/arm/aspeed-bmc-lenovo-hr630.dts b/dts/src/arm/aspeed-bmc-lenovo-hr630.dts new file mode 100644 index 0000000000..d3695a32e8 --- /dev/null +++ b/dts/src/arm/aspeed-bmc-lenovo-hr630.dts @@ -0,0 +1,566 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Device Tree file for Lenovo Hr630 platform + * + * Copyright (C) 2019-present Lenovo + */ + +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "HR630 BMC"; + compatible = "lenovo,hr630-bmc", "aspeed,ast2500"; + + aliases { + i2c14 = &i2c_rbp; + i2c15 = &i2c_fbp1; + i2c16 = &i2c_fbp2; + i2c17 = &i2c_fbp3; + i2c18 = &i2c_riser2; + i2c19 = &i2c_pcie4; + i2c20 = &i2c_riser1; + i2c21 = &i2c_ocp; + }; + + chosen { + stdout-path = &uart5; + bootargs = "console=tty0 console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x00100000>; /* 1M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_LOW>; + }; + + fault { + gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, + <&adc 12>, <&adc 13>, <&adc 14>; + }; + +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart2 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default + &pinctrl_rxd2_default + &pinctrl_nrts2_default + &pinctrl_ndtr2_default + &pinctrl_ndsr2_default + &pinctrl_ncts2_default + &pinctrl_ndcd2_default + &pinctrl_nri2_default>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd3_default + &pinctrl_rxd3_default>; +}; + +&uart5 { + status = "okay"; +}; + +&ibt { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&adc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default + &pinctrl_adc8_default + &pinctrl_adc9_default + &pinctrl_adc10_default + &pinctrl_adc12_default + &pinctrl_adc13_default + &pinctrl_adc14_default>; +}; + +&i2c0 { + status = "okay"; + /* temp1 inlet */ + tmp75@4e { + compatible = "national,lm75"; + reg = <0x4e>; + }; +}; + +&i2c1 { + status = "okay"; + /* temp2 outlet */ + tmp75@4d { + compatible = "national,lm75"; + reg = <0x4d>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + /* Slot 0, + * Slot 1, + * Slot 2, + * Slot 3 + */ + + i2c-switch@70 { + compatible = "nxp,pca9545"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; /* may use mux@70 next. */ + + i2c_rbp: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_fbp1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_fbp2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_fbp3: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c7 { + status = "okay"; + + /* Slot 0, + * Slot 1, + * Slot 2, + * Slot 3 + */ + i2c-switch@76 { + compatible = "nxp,pca9546"; + reg = <0x76>; + #address-cells = <1>; + #size-cells = <0>; + i2c-mux-idle-disconnect; /* may use mux@76 next. */ + + i2c_riser2: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_pcie4: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_riser1: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c_ocp: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + eeprom@57 { + compatible = "atmel,24c256"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&i2c12 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default + &pinctrl_pwm5_default + &pinctrl_pwm6_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + + fan@6 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x06>; + }; + + fan@7 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x07>; + }; + + fan@8 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x08>; + }; + + fan@9 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x09>; + }; + + fan@10 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0a>; + }; + + fan@11 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x0b>; + }; + + fan@12 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0c>; + }; + + fan@13 { + reg = <0x06>; + aspeed,fan-tach-ch = /bits/ 8 <0x0d>; + }; +}; + +&gpio { + + pin_gpio_b5 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "IRQ_BMC_PCH_SMI_LPC_N"; + }; + + pin_gpio_f0 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "IRQ_BMC_PCH_NMI_R"; + }; + + pin_gpio_f3 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "I2C_BUS0_RST_OUT_N"; + }; + + pin_gpio_f4 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "FM_SKT0_FAULT_LED"; + }; + + pin_gpio_f5 { + gpio-hog; + gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "FM_SKT1_FAULT_LED"; + }; + + pin_gpio_g4 { + gpio-hog; + gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "FAN_PWR_CTL_N"; + }; + + pin_gpio_g7 { + gpio-hog; + gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "RST_BMC_PCIE_I2CMUX_N"; + }; + + pin_gpio_h2 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PSU1_FFS_N_R"; + }; + + pin_gpio_h3 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PSU2_FFS_N_R"; + }; + + pin_gpio_i3 { + gpio-hog; + gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_INTRUDED_COVER"; + }; + + pin_gpio_j2 { + gpio-hog; + gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_BIOS_UPDATE_N"; + }; + + pin_gpio_j3 { + gpio-hog; + gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "RST_BMC_HDD_I2CMUX_N"; + }; + + pin_gpio_s2 { + gpio-hog; + gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_VGA_SW"; + }; + + pin_gpio_s4 { + gpio-hog; + gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>; + output; + line-name = "VBAT_EN_N"; + }; + + pin_gpio_s6 { + gpio-hog; + gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "PU_BMC_GPIOS6"; + }; + + pin_gpio_y0 { + gpio-hog; + gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "BMC_NCSI_MUX_CTL_S0"; + }; + + pin_gpio_y1 { + gpio-hog; + gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "BMC_NCSI_MUX_CTL_S1"; + }; + + pin_gpio_z0 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "I2C_RISER2_INT_N"; + }; + + pin_gpio_z2 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "I2C_RISER2_RESET_N"; + }; + + pin_gpio_z3 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "FM_BMC_PCH_SCI_LPC_N"; + }; + + pin_gpio_z7 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "BMC_POST_CMPLT_N"; + }; + + pin_gpio_aa0 { + gpio-hog; + gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "HOST_BMC_USB_SEL"; + }; + + pin_gpio_aa5 { + gpio-hog; + gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "I2C_BUS1_RST_OUT_N"; + }; + +}; diff --git a/dts/src/arm/aspeed-bmc-microsoft-olympus.dts b/dts/src/arm/aspeed-bmc-microsoft-olympus.dts new file mode 100644 index 0000000000..73319917cb --- /dev/null +++ b/dts/src/arm/aspeed-bmc-microsoft-olympus.dts @@ -0,0 +1,207 @@ +//SPDX-License-Identifier: GPL-2.0+ + +/dts-v1/; + +#include "aspeed-g4.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Olympus BMC"; + compatible = "microsoft,olympus-bmc", "aspeed,ast2400"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@40000000 { + reg = <0x40000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@5f000000 { + no-map; + reg = <0x5f000000 0x01000000>; /* 16M */ + }; + }; + + leds { + compatible = "gpio-leds"; + + bmc_heartbeat { + gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>; + }; + + power_green { + gpios = <&gpio ASPEED_GPIO(U, 2) GPIO_ACTIVE_HIGH>; + }; + + power_amber { + gpios = <&gpio ASPEED_GPIO(U, 3) GPIO_ACTIVE_HIGH>; + }; + + identify { + gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>; + }; + + fault { + gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>; + }; + }; + + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; + }; +}; + +&adc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc0_default + &pinctrl_adc1_default + &pinctrl_adc2_default + &pinctrl_adc3_default + &pinctrl_adc4_default + &pinctrl_adc5_default + &pinctrl_adc6_default + &pinctrl_adc7_default>; +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&wdt2 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default + &pinctrl_pwm1_default + &pinctrl_pwm2_default + &pinctrl_pwm3_default + &pinctrl_pwm4_default + &pinctrl_pwm5_default + &pinctrl_pwm6_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; + + fan@4 { + reg = <0x04>; + aspeed,fan-tach-ch = /bits/ 8 <0x04>; + }; + + fan@5 { + reg = <0x05>; + aspeed,fan-tach-ch = /bits/ 8 <0x05>; + }; + +}; diff --git a/dts/src/arm/aspeed-bmc-opp-lanyang.dts b/dts/src/arm/aspeed-bmc-opp-lanyang.dts index 024e52a6cd..de95112e2a 100644 --- a/dts/src/arm/aspeed-bmc-opp-lanyang.dts +++ b/dts/src/arm/aspeed-bmc-opp-lanyang.dts @@ -322,3 +322,5 @@ &adc { status = "okay"; }; + +#include "ibm-power9-dual.dtsi" diff --git a/dts/src/arm/aspeed-bmc-opp-palmetto.dts b/dts/src/arm/aspeed-bmc-opp-palmetto.dts index b249da80fb..b0cb34ccb1 100644 --- a/dts/src/arm/aspeed-bmc-opp-palmetto.dts +++ b/dts/src/arm/aspeed-bmc-opp-palmetto.dts @@ -347,3 +347,25 @@ line-name = "BMC_TPM_INT_N"; }; }; + +&fsi { + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + fsi_hub0: hub@3400 { + compatible = "ibm,fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + no-scan-on-init; + }; + }; +}; diff --git a/dts/src/arm/aspeed-bmc-opp-romulus.dts b/dts/src/arm/aspeed-bmc-opp-romulus.dts index 418a1988b2..9628ecb879 100644 --- a/dts/src/arm/aspeed-bmc-opp-romulus.dts +++ b/dts/src/arm/aspeed-bmc-opp-romulus.dts @@ -42,6 +42,13 @@ compatible = "shared-dma-pool"; reusable; }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32M */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; }; leds { @@ -304,3 +311,10 @@ &adc { status = "okay"; }; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +#include "ibm-power9-dual.dtsi" diff --git a/dts/src/arm/aspeed-bmc-opp-swift.dts b/dts/src/arm/aspeed-bmc-opp-swift.dts new file mode 100644 index 0000000000..caac895c60 --- /dev/null +++ b/dts/src/arm/aspeed-bmc-opp-swift.dts @@ -0,0 +1,966 @@ +// SPDX-License-Identifier: GPL-2.0+ +/dts-v1/; +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> + +/ { + model = "Swift BMC"; + compatible = "ibm,swift-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + + gfx_memory: framebuffer { + size = <0x01000000>; + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(B, 5)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(R, 7)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(N, 0)>; + }; + + oppanel-presence { + label = "oppanel-presence"; + gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(A, 7)>; + }; + + opencapi-riser-presence { + label = "opencapi-riser-presence"; + gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(I, 0)>; + }; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + scm0-presence { + label = "scm0-presence"; + gpios = <&pca9552 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + scm1-presence { + label = "scm1-presence"; + gpios = <&pca9552 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + cpu0vrm-presence { + label = "cpu0vrm-presence"; + gpios = <&pca9552 12 GPIO_ACTIVE_LOW>; + linux,code = <12>; + }; + + cpu1vrm-presence { + label = "cpu1vrm-presence"; + gpios = <&pca9552 13 GPIO_ACTIVE_LOW>; + linux,code = <13>; + }; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; + linux,code = <8>; + }; + + fanboost-presence { + label = "fanboost-presence"; + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; + linux,code = <9>; + }; + }; + + leds { + compatible = "gpio-leds"; + + fan0 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 0 GPIO_ACTIVE_LOW>; + }; + + fan1 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 1 GPIO_ACTIVE_LOW>; + }; + + fan2 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 2 GPIO_ACTIVE_LOW>; + }; + + fan3 { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 3 GPIO_ACTIVE_LOW>; + }; + + fanboost { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + }; + + front-fault { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 2 GPIO_ACTIVE_LOW>; + }; + + front-power { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 3 GPIO_ACTIVE_LOW>; + }; + + front-id { + retain-state-shutdown; + default-state = "keep"; + gpios = <&pca1 0 GPIO_ACTIVE_LOW>; + }; + + rear-fault { + gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>; + }; + + rear-id { + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + no-gpio-delays; + + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon-dps310 { + compatible = "iio-hwmon"; + io-channels = <&dps 0>; + }; + +}; + +&fmc { + status = "okay"; + + flash@0 { + status = "okay"; + label = "bmc"; + m25p,fast-read; + spi-max-frequency = <100000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x7F80000>; + label = "obmc-ubi"; + }; + }; + }; + + flash@1 { + status = "okay"; + label = "alt-bmc"; + m25p,fast-read; + spi-max-frequency = <100000000>; + partitions { + #address-cells = < 1 >; + #size-cells = < 1 >; + compatible = "fixed-partitions"; + u-boot@0 { + reg = < 0 0x60000 >; + label = "alt-u-boot"; + }; + u-boot-env@60000 { + reg = < 0x60000 0x20000 >; + label = "alt-u-boot-env"; + }; + obmc-ubi@80000 { + reg = < 0x80000 0x7F80000>; + label = "alt-obmc-ubi"; + }; + }; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + spi-max-frequency = <100000000>; + }; +}; + +&uart1 { + /* Rear RS-232 connector */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default + &pinctrl_nrts1_default + &pinctrl_ndtr1_default + &pinctrl_ndsr1_default + &pinctrl_ncts1_default + &pinctrl_ndcd1_default + &pinctrl_nri1_default>; +}; + +&uart2 { + /* APSS */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&mac0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&i2c2 { + status = "okay"; + + /* MUX -> + * Samtec 1 + * Samtec 2 + */ +}; + +&i2c3 { + status = "okay"; + + max31785@52 { + compatible = "maxim,max31785a"; + reg = <0x52>; + #address-cells = <1>; + #size-cells = <0>; + + fan@0 { + compatible = "pmbus-fan"; + reg = <0>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@1 { + compatible = "pmbus-fan"; + reg = <1>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@2 { + compatible = "pmbus-fan"; + reg = <2>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@3 { + compatible = "pmbus-fan"; + reg = <3>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + + fan@4 { + compatible = "pmbus-fan"; + reg = <4>; + tach-pulses = <2>; + maxim,fan-rotor-input = "tach"; + maxim,fan-pwm-freq = <25000>; + maxim,fan-no-watchdog; + maxim,fan-no-fault-ramp; + maxim,fan-ramp = <2>; + maxim,fan-fault-pin-mon; + }; + }; + + pca0: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + power-supply@68 { + compatible = "ibm,cffps1"; + reg = <0x68>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + power-supply@69 { + compatible = "ibm,cffps1"; + reg = <0x69>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; +}; + +&i2c7 { + status = "okay"; + + dps: dps310@76 { + compatible = "infineon,dps310"; + reg = <0x76>; + #io-channel-cells = <0>; + }; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + si7021a20@20 { + compatible = "si,si7021a20"; + reg = <0x20>; + }; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + pca1: pca9551@60 { + compatible = "nxp,pca9551"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + }; +}; + +&i2c8 { + status = "okay"; + + pca9552: pca9552@60 { + compatible = "nxp,pca9552"; + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N", + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF", + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF", + "P9_SCM0_PRES", "P9_SCM1_PRES", + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF", + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF", + "PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N", + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N"; + + gpio@0 { + reg = <0>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@1 { + reg = <1>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@2 { + reg = <2>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@3 { + reg = <3>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@4 { + reg = <4>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@5 { + reg = <5>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@6 { + reg = <6>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@7 { + reg = <7>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@8 { + reg = <8>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@9 { + reg = <9>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@10 { + reg = <10>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@11 { + reg = <11>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@12 { + reg = <12>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@13 { + reg = <13>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@14 { + reg = <14>; + type = <PCA955X_TYPE_GPIO>; + }; + + gpio@15 { + reg = <15>; + type = <PCA955X_TYPE_GPIO>; + }; + }; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; + + eeprom@51 { + compatible = "atmel,24c64"; + reg = <0x51>; + }; + + ucd90160@64 { + compatible = "ti,ucd90160"; + reg = <0x64>; + }; +}; + +&i2c9 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + pca2: pca9539@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + }; + + gpio@1 { + reg = <1>; + }; + + gpio@2 { + reg = <2>; + }; + + gpio@3 { + reg = <3>; + }; + + gpio@4 { + reg = <4>; + }; + + gpio@5 { + reg = <5>; + }; + + gpio@6 { + reg = <6>; + }; + + gpio@7 { + reg = <7>; + }; + + gpio@8 { + reg = <8>; + }; + + gpio@9 { + reg = <9>; + }; + + gpio@10 { + reg = <10>; + }; + + gpio@11 { + reg = <11>; + }; + + gpio@12 { + reg = <12>; + }; + + gpio@13 { + reg = <13>; + }; + + gpio@14 { + reg = <14>; + }; + + gpio@15 { + reg = <15>; + }; + }; +}; + +&i2c10 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + tmp423a@4c { + compatible = "ti,tmp423"; + reg = <0x4c>; + }; + + ir35221@71 { + compatible = "infineon,ir35221"; + reg = <0x71>; + }; + + ir35221@72 { + compatible = "infineon,ir35221"; + reg = <0x72>; + }; + + pca3: pca9539@74 { + compatible = "nxp,pca9539"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + + gpio@0 { + reg = <0>; + }; + + gpio@1 { + reg = <1>; + }; + + gpio@2 { + reg = <2>; + }; + + gpio@3 { + reg = <3>; + }; + + gpio@4 { + reg = <4>; + }; + + gpio@5 { + reg = <5>; + }; + + gpio@6 { + reg = <6>; + }; + + gpio@7 { + reg = <7>; + }; + + gpio@8 { + reg = <8>; + }; + + gpio@9 { + reg = <9>; + }; + + gpio@10 { + reg = <10>; + }; + + gpio@11 { + reg = <11>; + }; + + gpio@12 { + reg = <12>; + }; + + gpio@13 { + reg = <13>; + }; + + gpio@14 { + reg = <14>; + }; + + gpio@15 { + reg = <15>; + }; + }; +}; + +&i2c11 { + /* MUX + * -> PCIe Slot 0 + * -> PCIe Slot 1 + * -> PCIe Slot 2 + * -> PCIe Slot 3 + */ + status = "okay"; +}; + +&i2c12 { + status = "okay"; + + tmp275@48 { + compatible = "ti,tmp275"; + reg = <0x48>; + }; + + tmp275@4a { + compatible = "ti,tmp275"; + reg = <0x4a>; + }; +}; + +&i2c13 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; + memory-region = <&gfx_memory>; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + aspeed,alt-boot; +}; + +&ibt { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +#include "ibm-power9-dual.dtsi" diff --git a/dts/src/arm/aspeed-bmc-opp-vesnin.dts b/dts/src/arm/aspeed-bmc-opp-vesnin.dts new file mode 100644 index 0000000000..0b9e29c321 --- /dev/null +++ b/dts/src/arm/aspeed-bmc-opp-vesnin.dts @@ -0,0 +1,224 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2019 YADRO +/dts-v1/; + +#include "aspeed-g4.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Vesnin BMC"; + compatible = "yadro,vesnin-bmc", "aspeed,ast2400"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory { + reg = <0x40000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@5f000000 { + no-map; + reg = <0x5f000000 0x01000000>; /* 16MB */ + }; + flash_memory: region@5c000000 { + no-map; + reg = <0x5c000000 0x02000000>; /* 32M */ + }; + }; + + leds { + compatible = "gpio-leds"; + + heartbeat { + gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>; + }; + power_red { + gpios = <&gpio ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>; + }; + + id_blue { + gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_LOW>; + }; + + alarm_red { + gpios = <&gpio ASPEED_GPIO(N, 6) GPIO_ACTIVE_LOW>; + }; + + alarm_yel { + gpios = <&gpio ASPEED_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button_checkstop { + label = "checkstop"; + linux,code = <74>; + gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>; + }; + + button_identify { + label = "identify"; + linux,code = <152>; + gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>; + }; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1debug_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + }; +}; + +&mac0 { + status = "okay"; + + use-ncsi; + no-hw-checksum; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; +}; + + +&uart5 { + status = "okay"; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi>; +}; + +&ibt { + status = "okay"; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + pagesize = <64>; + }; +}; + +&i2c1 { + status = "okay"; + + tmp75@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + occ-hwmon@50 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x50>; + }; +}; + +&i2c5 { + status = "okay"; + + occ-hwmon@51 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x51>; + }; +}; + +&i2c6 { + status = "okay"; + + w83795g@2f { + compatible = "nuvoton,w83795g"; + reg = <0x2f>; + }; +}; + +&i2c7 { + status = "okay"; + + occ-hwmon@56 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x56>; + }; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; + + occ-hwmon@57 { + compatible = "ibm,p8-occ-hwmon"; + reg = <0x57>; + }; +}; + +&i2c12 { + status = "okay"; + + rtc@68 { + compatible = "maxim,ds3231"; + reg = <0x68>; + }; +}; + +&i2c13 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; diff --git a/dts/src/arm/aspeed-bmc-opp-witherspoon.dts b/dts/src/arm/aspeed-bmc-opp-witherspoon.dts index f1356ca794..31ea34e14c 100644 --- a/dts/src/arm/aspeed-bmc-opp-witherspoon.dts +++ b/dts/src/arm/aspeed-bmc-opp-witherspoon.dts @@ -33,6 +33,13 @@ compatible = "shared-dma-pool"; reusable; }; + + video_engine_memory: jpegbuffer { + size = <0x02000000>; /* 32MM */ + alignment = <0x01000000>; + compatible = "shared-dma-pool"; + reusable; + }; }; gpio-keys { @@ -640,3 +647,10 @@ &vhub { status = "okay"; }; + +&video { + status = "okay"; + memory-region = <&video_engine_memory>; +}; + +#include "ibm-power9-dual.dtsi" diff --git a/dts/src/arm/aspeed-bmc-opp-zaius.dts b/dts/src/arm/aspeed-bmc-opp-zaius.dts index 2c5aa90a54..3062437831 100644 --- a/dts/src/arm/aspeed-bmc-opp-zaius.dts +++ b/dts/src/arm/aspeed-bmc-opp-zaius.dts @@ -7,6 +7,14 @@ model = "Zaius BMC"; compatible = "ingrasys,zaius-bmc", "aspeed,ast2500"; + aliases { + i2c15 = &i2cpcie0; + i2c16 = &i2cpcie1; + i2c17 = &i2cpcie2; + i2c19 = &i2cpcie3; + i2c20 = &i2cpcie4; + }; + chosen { stdout-path = &uart5; bootargs = "console=ttyS4,115200 earlyprintk"; @@ -223,6 +231,27 @@ reg = <0x71>; #address-cells = <1>; #size-cells = <0>; + + i2cpcie0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2cpcie1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2cpcie2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + i2ctpm: i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + }; }; /* MUX1 PCA9546A @71h @@ -253,6 +282,17 @@ reg = <0x71>; #address-cells = <1>; #size-cells = <0>; + + i2cpcie3: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + i2cpcie4: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; }; /* MUX1 PCA9546A @71h @@ -296,33 +336,98 @@ reg = <0x54>; }; }; + + }; + + vrm@64 { + compatible = "isil,isl68137"; + reg = <0x64>; + }; + + vrm@40 { + compatible = "isil,isl68137"; + reg = <0x40>; + }; + + vrm@60 { + compatible = "isil,isl68137"; + reg = <0x60>; + }; + + vrm@43 { + compatible = "infineon,ir38064"; + reg = <0x43>; + }; + + vrm@41 { + compatible = "isil,isl68137"; + reg = <0x41>; }; /* Master selector PCA9541A @70h (other master: CPU0) * LM5066I PMBUS @10h */ - /* 12V Quarter Brick DC/DC Converter Q54SJ12050 @61h */ - power-brick@61 { + /* + * Brick will be one of these types/addresses. Depending + * on the board SKU only one is actually present and will successfully + * instantiate while the others will fail the probe operation. + * These are the PVT (and presumably beyond) addresses: + * 12V Quarter Brick DC/DC Converter Q54SJ12050 @6Ah + * 12V Quarter Brick DC/DC Converter Q54SH12050 @30h + */ + power-brick@6a { + compatible = "delta,dps800"; + reg = <0x6a>; + }; + power-brick@30 { compatible = "delta,dps800"; - reg = <0x61>; + reg = <0x30>; }; /* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */ /* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */ /* CPU0 VR ISL68137 0.8V PMBUS @60h */ - /* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @41h */ + /* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @43h */ /* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */ + /* Master selector PCA9541A @70h (other master: CPU0) + * LM5066I PMBUS @10h + */ }; &i2c8 { status = "okay"; - /* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @65h */ - /* CPU1 VR ISL68137 1.2V CH03 PMBUS @44h */ - /* CPU1 VR ISL68137 0.8V PMBUS @61h */ + vrm@64 { + compatible = "isil,isl68137"; + reg = <0x64>; + }; + + vrm@40 { + compatible = "isil,isl68137"; + reg = <0x40>; + }; + + vrm@41 { + compatible = "isil,isl68137"; + reg = <0x41>; + }; + + vrm@42 { + compatible = "infineon,ir38064"; + reg = <0x42>; + }; + + vrm@60 { + compatible = "isil,isl68137"; + reg = <0x60>; + }; + + /* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @64h */ + /* CPU1 VR ISL68137 1.2V CH03 PMBUS @40h */ + /* CPU1 VR ISL68137 1.2V CH47 PMBUS @41h */ /* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */ - /* CPU0 VR ISL68137 1.2V CH47 PMBUS @45h */ + /* CPU1 VR ISL68137 0.8V PMBUS @60h */ }; @@ -435,3 +540,5 @@ &ibt { status = "okay"; }; + +#include "ibm-power9-dual.dtsi" diff --git a/dts/src/arm/aspeed-bmc-quanta-q71l.dts b/dts/src/arm/aspeed-bmc-quanta-q71l.dts index 0d7c6339da..a68ff0675c 100644 --- a/dts/src/arm/aspeed-bmc-quanta-q71l.dts +++ b/dts/src/arm/aspeed-bmc-quanta-q71l.dts @@ -112,6 +112,11 @@ &pinctrl_ddcclk_default &pinctrl_ddcdat_default>; }; +&p2a { + status = "okay"; + memory-region = <&vga_memory>; +}; + &ibt { status = "okay"; }; diff --git a/dts/src/arm/aspeed-g4.dtsi b/dts/src/arm/aspeed-g4.dtsi index 5d7050d008..dd4b0b15af 100644 --- a/dts/src/arm/aspeed-g4.dtsi +++ b/dts/src/arm/aspeed-g4.dtsi @@ -53,7 +53,7 @@ #size-cells = <1>; ranges; - fmc: flash-controller@1e620000 { + fmc: spi@1e620000 { reg = < 0x1e620000 0x94 0x20000000 0x10000000 >; #address-cells = <1>; @@ -69,7 +69,7 @@ }; }; - spi: flash-controller@1e630000 { + spi: spi@1e630000 { reg = < 0x1e630000 0x18 0x30000000 0x10000000 >; #address-cells = <1>; @@ -165,6 +165,10 @@ compatible = "aspeed,g4-pinctrl"; }; + p2a: p2a-control { + compatible = "aspeed,ast2400-p2a-ctrl"; + status = "disabled"; + }; }; rng: hwrng@1e6e2078 { diff --git a/dts/src/arm/aspeed-g5.dtsi b/dts/src/arm/aspeed-g5.dtsi index 4345c3153c..5b1ca265c2 100644 --- a/dts/src/arm/aspeed-g5.dtsi +++ b/dts/src/arm/aspeed-g5.dtsi @@ -60,7 +60,7 @@ #size-cells = <1>; ranges; - fmc: flash-controller@1e620000 { + fmc: spi@1e620000 { reg = < 0x1e620000 0xc4 0x20000000 0x10000000 >; #address-cells = <1>; @@ -86,7 +86,7 @@ }; }; - spi1: flash-controller@1e630000 { + spi1: spi@1e630000 { reg = < 0x1e630000 0xc4 0x30000000 0x08000000 >; #address-cells = <1>; @@ -106,7 +106,7 @@ }; }; - spi2: flash-controller@1e631000 { + spi2: spi@1e631000 { reg = < 0x1e631000 0xc4 0x38000000 0x08000000 >; #address-cells = <1>; @@ -219,6 +219,11 @@ aspeed,external-nodes = <&gfx &lhc>; }; + + p2a: p2a-control { + compatible = "aspeed,ast2500-p2a-ctrl"; + status = "disabled"; + }; }; rng: hwrng@1e6e2078 { diff --git a/dts/src/arm/at91-wb50n.dtsi b/dts/src/arm/at91-wb50n.dtsi index 85692c8ef2..4ed8500a5c 100644 --- a/dts/src/arm/at91-wb50n.dtsi +++ b/dts/src/arm/at91-wb50n.dtsi @@ -42,7 +42,7 @@ clock-frequency = <12000000>; }; -&slow_osc { +&clk32k { atmel,osc-bypass; }; diff --git a/dts/src/arm/at91sam9261ek.dts b/dts/src/arm/at91sam9261ek.dts index 1fa84d2f06..7debdeabcf 100644 --- a/dts/src/arm/at91sam9261ek.dts +++ b/dts/src/arm/at91sam9261ek.dts @@ -14,14 +14,6 @@ chosen { bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw"; stdout-path = "serial0:115200n8"; - - clocksource { - timer = <&timer0>; - }; - - clockevent { - timer = <&timer1>; - }; }; memory { diff --git a/dts/src/arm/at91sam9g45.dtsi b/dts/src/arm/at91sam9g45.dtsi index 9483609a21..691c95ea61 100644 --- a/dts/src/arm/at91sam9g45.dtsi +++ b/dts/src/arm/at91sam9g45.dtsi @@ -1258,30 +1258,11 @@ }; }; - sckc@fffffd50 { + clk32k: sckc@fffffd50 { compatible = "atmel,at91sam9x5-sckc"; reg = <0xfffffd50 0x4>; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - atmel,startup-time-usec = <1200000>; - clocks = <&slow_xtal>; - }; - - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - atmel,startup-time-usec = <75>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - }; - - clk32k: slck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_osc>; - }; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; rtc@fffffd20 { diff --git a/dts/src/arm/at91sam9rl.dtsi b/dts/src/arm/at91sam9rl.dtsi index e2d38ce434..8643b71515 100644 --- a/dts/src/arm/at91sam9rl.dtsi +++ b/dts/src/arm/at91sam9rl.dtsi @@ -868,30 +868,11 @@ status = "disabled"; }; - sckc@fffffd50 { + clk32k: sckc@fffffd50 { compatible = "atmel,at91sam9x5-sckc"; reg = <0xfffffd50 0x4>; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - atmel,startup-time-usec = <1200000>; - clocks = <&slow_xtal>; - }; - - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - atmel,startup-time-usec = <75>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - }; - - clk32k: slck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_osc>; - }; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; rtc@fffffd20 { diff --git a/dts/src/arm/at91sam9x5.dtsi b/dts/src/arm/at91sam9x5.dtsi index 9b7ce6bb1d..ef47c005ef 100644 --- a/dts/src/arm/at91sam9x5.dtsi +++ b/dts/src/arm/at91sam9x5.dtsi @@ -149,28 +149,11 @@ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; - sckc@fffffe50 { + clk32k: sckc@fffffe50 { compatible = "atmel,at91sam9x5-sckc"; reg = <0xfffffe50 0x4>; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - clocks = <&slow_xtal>; - }; - - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - }; - - clk32k: slck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc>, <&slow_osc>; - }; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; tcb0: timer@f8008000 { diff --git a/dts/src/arm/bcm-cygnus-clock.dtsi b/dts/src/arm/bcm-cygnus-clock.dtsi index 80b6ba4ca5..52f91a12a9 100644 --- a/dts/src/arm/bcm-cygnus-clock.dtsi +++ b/dts/src/arm/bcm-cygnus-clock.dtsi @@ -42,7 +42,7 @@ clocks { }; /* Cygnus ARM PLL */ - armpll: armpll { + armpll: armpll@19000000 { #clock-cells = <0>; compatible = "brcm,cygnus-armpll"; clocks = <&osc>; @@ -67,7 +67,7 @@ clocks { clock-mult = <1>; }; - genpll: genpll { + genpll: genpll@301d000 { #clock-cells = <1>; compatible = "brcm,cygnus-genpll"; reg = <0x0301d000 0x2c>, <0x0301c020 0x4>; @@ -94,7 +94,7 @@ clocks { clock-mult = <1>; }; - lcpll0: lcpll0 { + lcpll0: lcpll0@301d02c { #clock-cells = <1>; compatible = "brcm,cygnus-lcpll0"; reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>; @@ -103,7 +103,7 @@ clocks { "usb_phy", "smart_card", "ch5"; }; - mipipll: mipipll { + mipipll: mipipll@180a9800 { #clock-cells = <1>; compatible = "brcm,cygnus-mipipll"; reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>; @@ -113,7 +113,7 @@ clocks { "ch5_unused"; }; - asiu_clks: asiu_clks { + asiu_clks: asiu_clks@301d048 { #clock-cells = <1>; compatible = "brcm,cygnus-asiu-clk"; reg = <0x0301d048 0xc>, <0x180aa024 0x4>; @@ -122,7 +122,7 @@ clocks { clock-output-names = "keypad", "adc/touch", "pwm"; }; - audiopll: audiopll { + audiopll: audiopll@180aeb00 { #clock-cells = <1>; compatible = "brcm,cygnus-audiopll"; reg = <0x180aeb00 0x68>; diff --git a/dts/src/arm/bcm-cygnus.dtsi b/dts/src/arm/bcm-cygnus.dtsi index 5f7b46503a..2dac3efc76 100644 --- a/dts/src/arm/bcm-cygnus.dtsi +++ b/dts/src/arm/bcm-cygnus.dtsi @@ -45,7 +45,7 @@ ethernet0 = ð0; }; - memory { + memory@0 { device_type = "memory"; reg = <0 0>; }; @@ -69,7 +69,7 @@ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; }; - core { + core@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x1000000>; #address-cells = <1>; @@ -91,7 +91,7 @@ <0x20100 0x100>; }; - L2: l2-cache { + L2: l2-cache@22000 { compatible = "arm,pl310-cache"; reg = <0x22000 0x1000>; cache-unified; diff --git a/dts/src/arm/bcm-nsp.dtsi b/dts/src/arm/bcm-nsp.dtsi index 6925b30c22..da6d70f09e 100644 --- a/dts/src/arm/bcm-nsp.dtsi +++ b/dts/src/arm/bcm-nsp.dtsi @@ -77,7 +77,7 @@ interrupt-affinity = <&cpu0>, <&cpu1>; }; - mpcore { + mpcore@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; @@ -122,7 +122,7 @@ <0x20100 0x100>; }; - L2: l2-cache { + L2: l2-cache@22000 { compatible = "arm,pl310-cache"; reg = <0x22000 0x1000>; cache-unified; @@ -166,7 +166,7 @@ }; }; - axi { + axi@18000000 { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x0011c40c>; #address-cells = <1>; @@ -415,9 +415,6 @@ "imp_sleep_timer_p5", "imp_sleep_timer_p7", "imp_sleep_timer_p8"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; /* ports are defined in board DTS */ diff --git a/dts/src/arm/bcm11351.dtsi b/dts/src/arm/bcm11351.dtsi index b99c2e5796..6197e7d80e 100644 --- a/dts/src/arm/bcm11351.dtsi +++ b/dts/src/arm/bcm11351.dtsi @@ -100,7 +100,7 @@ reg-io-width = <4>; }; - L2: l2-cache { + L2: l2-cache@3ff20000 { compatible = "brcm,bcm11351-a2-pl310-cache"; reg = <0x3ff20000 0x1000>; cache-unified; @@ -225,21 +225,21 @@ #size-cells = <1>; ranges; - root_ccu: root_ccu { + root_ccu: root_ccu@35001000 { compatible = "brcm,bcm11351-root-ccu"; reg = <0x35001000 0x0f00>; #clock-cells = <1>; clock-output-names = "frac_1m"; }; - hub_ccu: hub_ccu { + hub_ccu: hub_ccu@34000000 { compatible = "brcm,bcm11351-hub-ccu"; reg = <0x34000000 0x0f00>; #clock-cells = <1>; clock-output-names = "tmon_1m"; }; - aon_ccu: aon_ccu { + aon_ccu: aon_ccu@35002000 { compatible = "brcm,bcm11351-aon-ccu"; reg = <0x35002000 0x0f00>; #clock-cells = <1>; @@ -248,7 +248,7 @@ "pmu_bsc_var"; }; - master_ccu: master_ccu { + master_ccu: master_ccu@3f001000 { compatible = "brcm,bcm11351-master-ccu"; reg = <0x3f001000 0x0f00>; #clock-cells = <1>; @@ -261,7 +261,7 @@ "hsic2_12m"; }; - slave_ccu: slave_ccu { + slave_ccu: slave_ccu@3e011000 { compatible = "brcm,bcm11351-slave-ccu"; reg = <0x3e011000 0x0f00>; #clock-cells = <1>; diff --git a/dts/src/arm/bcm21664-garnet.dts b/dts/src/arm/bcm21664-garnet.dts index 8b045cfab6..be468f4adc 100644 --- a/dts/src/arm/bcm21664-garnet.dts +++ b/dts/src/arm/bcm21664-garnet.dts @@ -21,7 +21,7 @@ model = "BCM21664 Garnet board"; compatible = "brcm,bcm21664-garnet", "brcm,bcm21664"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/dts/src/arm/bcm21664.dtsi b/dts/src/arm/bcm21664.dtsi index 758daa3341..3cf66faf3b 100644 --- a/dts/src/arm/bcm21664.dtsi +++ b/dts/src/arm/bcm21664.dtsi @@ -90,7 +90,7 @@ reg-io-width = <4>; }; - L2: l2-cache { + L2: l2-cache@3ff20000 { compatible = "arm,pl310-cache"; reg = <0x3ff20000 0x1000>; cache-unified; @@ -295,21 +295,21 @@ clock-frequency = <156000000>; }; - root_ccu: root_ccu { + root_ccu: root_ccu@35001000 { compatible = BCM21664_DT_ROOT_CCU_COMPAT; reg = <0x35001000 0x0f00>; #clock-cells = <1>; clock-output-names = "frac_1m"; }; - aon_ccu: aon_ccu { + aon_ccu: aon_ccu@35002000 { compatible = BCM21664_DT_AON_CCU_COMPAT; reg = <0x35002000 0x0f00>; #clock-cells = <1>; clock-output-names = "hub_timer"; }; - master_ccu: master_ccu { + master_ccu: master_ccu@3f001000 { compatible = BCM21664_DT_MASTER_CCU_COMPAT; reg = <0x3f001000 0x0f00>; #clock-cells = <1>; @@ -323,7 +323,7 @@ "sdio4_sleep"; }; - slave_ccu: slave_ccu { + slave_ccu: slave_ccu@3e011000 { compatible = BCM21664_DT_SLAVE_CCU_COMPAT; reg = <0x3e011000 0x0f00>; #clock-cells = <1>; diff --git a/dts/src/arm/bcm23550-sparrow.dts b/dts/src/arm/bcm23550-sparrow.dts index 1c66b15f30..ace77709f4 100644 --- a/dts/src/arm/bcm23550-sparrow.dts +++ b/dts/src/arm/bcm23550-sparrow.dts @@ -45,7 +45,7 @@ bootargs = "console=ttyS0,115200n8"; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; diff --git a/dts/src/arm/bcm23550.dtsi b/dts/src/arm/bcm23550.dtsi index 701198f5f4..a36c9b1d23 100644 --- a/dts/src/arm/bcm23550.dtsi +++ b/dts/src/arm/bcm23550.dtsi @@ -371,21 +371,21 @@ clock-frequency = <156000000>; }; - root_ccu: root_ccu { + root_ccu: root_ccu@35001000 { compatible = BCM21664_DT_ROOT_CCU_COMPAT; reg = <0x35001000 0x0f00>; #clock-cells = <1>; clock-output-names = "frac_1m"; }; - aon_ccu: aon_ccu { + aon_ccu: aon_ccu@35002000 { compatible = BCM21664_DT_AON_CCU_COMPAT; reg = <0x35002000 0x0f00>; #clock-cells = <1>; clock-output-names = "hub_timer"; }; - slave_ccu: slave_ccu { + slave_ccu: slave_ccu@3e011000 { compatible = BCM21664_DT_SLAVE_CCU_COMPAT; reg = <0x3e011000 0x0f00>; #clock-cells = <1>; @@ -398,7 +398,7 @@ "bsc4"; }; - master_ccu: master_ccu { + master_ccu: master_ccu@3f001000 { compatible = BCM21664_DT_MASTER_CCU_COMPAT; reg = <0x3f001000 0x0f00>; #clock-cells = <1>; diff --git a/dts/src/arm/bcm28155-ap.dts b/dts/src/arm/bcm28155-ap.dts index fbfca83bd2..ead6e9804d 100644 --- a/dts/src/arm/bcm28155-ap.dts +++ b/dts/src/arm/bcm28155-ap.dts @@ -21,7 +21,7 @@ model = "BCM28155 AP board"; compatible = "brcm,bcm28155-ap", "brcm,bcm11351"; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; diff --git a/dts/src/arm/bcm283x.dtsi b/dts/src/arm/bcm283x.dtsi index 9777644c6c..4b21ddb26a 100644 --- a/dts/src/arm/bcm283x.dtsi +++ b/dts/src/arm/bcm283x.dtsi @@ -431,6 +431,8 @@ reg = <0x7e204000 0x1000>; interrupts = <2 22>; clocks = <&clocks BCM2835_CLOCK_VPU>; + dmas = <&dma 6>, <&dma 7>; + dma-names = "tx", "rx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; diff --git a/dts/src/arm/bcm4708-asus-rt-ac56u.dts b/dts/src/arm/bcm4708-asus-rt-ac56u.dts index 1c6f561ac5..6a96655d86 100644 --- a/dts/src/arm/bcm4708-asus-rt-ac56u.dts +++ b/dts/src/arm/bcm4708-asus-rt-ac56u.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -69,8 +69,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; rfkill { label = "WiFi"; diff --git a/dts/src/arm/bcm4708-asus-rt-ac68u.dts b/dts/src/arm/bcm4708-asus-rt-ac68u.dts index e550799a6a..3b0029e61b 100644 --- a/dts/src/arm/bcm4708-asus-rt-ac68u.dts +++ b/dts/src/arm/bcm4708-asus-rt-ac68u.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -53,8 +53,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; brightness { label = "Backlight"; diff --git a/dts/src/arm/bcm4708-buffalo-wzr-1750dhp.dts b/dts/src/arm/bcm4708-buffalo-wzr-1750dhp.dts index 7bfa2238f7..90f57bad6b 100644 --- a/dts/src/arm/bcm4708-buffalo-wzr-1750dhp.dts +++ b/dts/src/arm/bcm4708-buffalo-wzr-1750dhp.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -99,8 +99,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm4708-linksys-ea6300-v1.dts b/dts/src/arm/bcm4708-linksys-ea6300-v1.dts index fd361c9b13..41548d6d47 100644 --- a/dts/src/arm/bcm4708-linksys-ea6300-v1.dts +++ b/dts/src/arm/bcm4708-linksys-ea6300-v1.dts @@ -16,15 +16,13 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/dts/src/arm/bcm4708-linksys-ea6500-v2.dts b/dts/src/arm/bcm4708-linksys-ea6500-v2.dts index 7c34360d32..cd797b4202 100644 --- a/dts/src/arm/bcm4708-linksys-ea6500-v2.dts +++ b/dts/src/arm/bcm4708-linksys-ea6500-v2.dts @@ -17,15 +17,13 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/dts/src/arm/bcm4708-luxul-xap-1510.dts b/dts/src/arm/bcm4708-luxul-xap-1510.dts index 969b8d78e4..e58c8077be 100644 --- a/dts/src/arm/bcm4708-luxul-xap-1510.dts +++ b/dts/src/arm/bcm4708-luxul-xap-1510.dts @@ -15,7 +15,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -44,8 +44,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm4708-luxul-xwc-1000.dts b/dts/src/arm/bcm4708-luxul-xwc-1000.dts index b62854ee27..766db61745 100644 --- a/dts/src/arm/bcm4708-luxul-xwc-1000.dts +++ b/dts/src/arm/bcm4708-luxul-xwc-1000.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -51,8 +51,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm4708-netgear-r6250.dts b/dts/src/arm/bcm4708-netgear-r6250.dts index 75f7b4ef35..fed75e6ab5 100644 --- a/dts/src/arm/bcm4708-netgear-r6250.dts +++ b/dts/src/arm/bcm4708-netgear-r6250.dts @@ -62,8 +62,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/dts/src/arm/bcm4708-netgear-r6300-v2.dts b/dts/src/arm/bcm4708-netgear-r6300-v2.dts index 148d16a908..79542e1891 100644 --- a/dts/src/arm/bcm4708-netgear-r6300-v2.dts +++ b/dts/src/arm/bcm4708-netgear-r6300-v2.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -58,8 +58,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/dts/src/arm/bcm4708-smartrg-sr400ac.dts b/dts/src/arm/bcm4708-smartrg-sr400ac.dts index eed3aab667..abd35a5180 100644 --- a/dts/src/arm/bcm4708-smartrg-sr400ac.dts +++ b/dts/src/arm/bcm4708-smartrg-sr400ac.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -93,8 +93,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; rfkill { label = "WiFi"; diff --git a/dts/src/arm/bcm47081-asus-rt-n18u.dts b/dts/src/arm/bcm47081-asus-rt-n18u.dts index fe842f2f1c..c29950b43a 100644 --- a/dts/src/arm/bcm47081-asus-rt-n18u.dts +++ b/dts/src/arm/bcm47081-asus-rt-n18u.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -59,8 +59,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts b/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts index 6fcbb0509b..4dcec68654 100644 --- a/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts +++ b/dts/src/arm/bcm47081-buffalo-wzr-600dhp2.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -90,8 +90,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; aoss { label = "AOSS"; diff --git a/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts b/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts index b3e8cc90b1..0e349e39f6 100644 --- a/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts +++ b/dts/src/arm/bcm47081-buffalo-wzr-900dhp.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -95,8 +95,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47081-luxul-xap-1410.dts b/dts/src/arm/bcm47081-luxul-xap-1410.dts index fdeaa89551..b9d9501163 100644 --- a/dts/src/arm/bcm47081-luxul-xap-1410.dts +++ b/dts/src/arm/bcm47081-luxul-xap-1410.dts @@ -15,7 +15,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -44,8 +44,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47081-luxul-xwr-1200.dts b/dts/src/arm/bcm47081-luxul-xwr-1200.dts index 0d510cb15e..0052e1b241 100644 --- a/dts/src/arm/bcm47081-luxul-xwr-1200.dts +++ b/dts/src/arm/bcm47081-luxul-xwr-1200.dts @@ -16,7 +16,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -88,8 +88,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts b/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts index 962e89edba..01c390ed48 100644 --- a/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts +++ b/dts/src/arm/bcm47081-tplink-archer-c5-v2.dts @@ -15,7 +15,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -76,8 +76,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; rfkill { label = "WiFi"; diff --git a/dts/src/arm/bcm47094-dlink-dir-885l.dts b/dts/src/arm/bcm47094-dlink-dir-885l.dts index 658a56ff8a..911c65fbf2 100644 --- a/dts/src/arm/bcm47094-dlink-dir-885l.dts +++ b/dts/src/arm/bcm47094-dlink-dir-885l.dts @@ -19,7 +19,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -85,8 +85,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/dts/src/arm/bcm47094-linksys-panamera.dts b/dts/src/arm/bcm47094-linksys-panamera.dts index 5fd47eec44..18d0ae46e7 100644 --- a/dts/src/arm/bcm47094-linksys-panamera.dts +++ b/dts/src/arm/bcm47094-linksys-panamera.dts @@ -16,7 +16,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -24,8 +24,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/dts/src/arm/bcm47094-luxul-abr-4500.dts b/dts/src/arm/bcm47094-luxul-abr-4500.dts index 6604be6ff0..50f7cd08cf 100644 --- a/dts/src/arm/bcm47094-luxul-abr-4500.dts +++ b/dts/src/arm/bcm47094-luxul-abr-4500.dts @@ -16,7 +16,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -43,8 +43,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47094-luxul-xap-1610.dts b/dts/src/arm/bcm47094-luxul-xap-1610.dts index 567ebbd5a0..b47fb0700a 100644 --- a/dts/src/arm/bcm47094-luxul-xap-1610.dts +++ b/dts/src/arm/bcm47094-luxul-xap-1610.dts @@ -15,7 +15,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -42,8 +42,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47094-luxul-xbr-4500.dts b/dts/src/arm/bcm47094-luxul-xbr-4500.dts index ac2d136ed3..bcc420f85b 100644 --- a/dts/src/arm/bcm47094-luxul-xbr-4500.dts +++ b/dts/src/arm/bcm47094-luxul-xbr-4500.dts @@ -16,7 +16,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -43,8 +43,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47094-luxul-xwr-3100.dts b/dts/src/arm/bcm47094-luxul-xwr-3100.dts index 74371e821b..ac75154234 100644 --- a/dts/src/arm/bcm47094-luxul-xwr-3100.dts +++ b/dts/src/arm/bcm47094-luxul-xwr-3100.dts @@ -16,7 +16,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x08000000>; @@ -83,8 +83,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts b/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts index b44af63ee3..6d28b7dacd 100644 --- a/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts +++ b/dts/src/arm/bcm47094-luxul-xwr-3150-v1.dts @@ -16,7 +16,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -58,8 +58,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47094-netgear-r8500.dts b/dts/src/arm/bcm47094-netgear-r8500.dts index eebc0d43e2..f42a1703f4 100644 --- a/dts/src/arm/bcm47094-netgear-r8500.dts +++ b/dts/src/arm/bcm47094-netgear-r8500.dts @@ -16,7 +16,7 @@ bootargs = "console=ttyS0,115200"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -64,8 +64,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; brightness { label = "Backlight"; diff --git a/dts/src/arm/bcm47094-phicomm-k3.dts b/dts/src/arm/bcm47094-phicomm-k3.dts index 456045f17a..ac3a4483dc 100644 --- a/dts/src/arm/bcm47094-phicomm-k3.dts +++ b/dts/src/arm/bcm47094-phicomm-k3.dts @@ -13,7 +13,7 @@ compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708"; model = "Phicomm K3"; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000 0x88000000 0x18000000>; @@ -21,8 +21,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47189-luxul-xap-1440.dts b/dts/src/arm/bcm47189-luxul-xap-1440.dts index eb59508578..57ca1cfaec 100644 --- a/dts/src/arm/bcm47189-luxul-xap-1440.dts +++ b/dts/src/arm/bcm47189-luxul-xap-1440.dts @@ -15,7 +15,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -38,8 +38,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47189-luxul-xap-810.dts b/dts/src/arm/bcm47189-luxul-xap-810.dts index 4c71f5e95e..2e1a7e382c 100644 --- a/dts/src/arm/bcm47189-luxul-xap-810.dts +++ b/dts/src/arm/bcm47189-luxul-xap-810.dts @@ -15,7 +15,7 @@ bootargs = "earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -48,8 +48,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm47189-tenda-ac9.dts b/dts/src/arm/bcm47189-tenda-ac9.dts index 5ad53ea52d..049cdfd927 100644 --- a/dts/src/arm/bcm47189-tenda-ac9.dts +++ b/dts/src/arm/bcm47189-tenda-ac9.dts @@ -15,7 +15,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -58,8 +58,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; rfkill { label = "WiFi"; diff --git a/dts/src/arm/bcm5301x.dtsi b/dts/src/arm/bcm5301x.dtsi index ac5266ee8d..372dc1eb88 100644 --- a/dts/src/arm/bcm5301x.dtsi +++ b/dts/src/arm/bcm5301x.dtsi @@ -19,7 +19,7 @@ #size-cells = <1>; interrupt-parent = <&gic>; - chipcommonA { + chipcommonA@18000000 { compatible = "simple-bus"; ranges = <0x00000000 0x18000000 0x00001000>; #address-cells = <1>; @@ -44,7 +44,7 @@ }; }; - mpcore { + mpcore@19000000 { compatible = "simple-bus"; ranges = <0x00000000 0x19000000 0x00023000>; #address-cells = <1>; @@ -148,7 +148,7 @@ }; }; - usb2_phy: usb2-phy { + usb2_phy: usb2-phy@1800c000 { compatible = "brcm,ns-usb2-phy"; reg = <0x1800c000 0x1000>; reg-names = "dmu"; @@ -357,7 +357,7 @@ #address-cells = <0>; }; - mdio-bus-mux { + mdio-bus-mux@18003000 { compatible = "mdio-mux-mmioreg"; mdio-parent-bus = <&mdio>; #address-cells = <1>; @@ -464,8 +464,6 @@ srab: srab@18007000 { compatible = "brcm,bcm5301x-srab"; reg = <0x18007000 0x1000>; - #address-cells = <1>; - #size-cells = <0>; status = "disabled"; diff --git a/dts/src/arm/bcm53573.dtsi b/dts/src/arm/bcm53573.dtsi index b29695bd48..4af8e3293c 100644 --- a/dts/src/arm/bcm53573.dtsi +++ b/dts/src/arm/bcm53573.dtsi @@ -32,7 +32,7 @@ }; }; - mpcore { + mpcore@18310000 { compatible = "simple-bus"; ranges = <0x00000000 0x18310000 0x00008000>; #address-cells = <1>; diff --git a/dts/src/arm/bcm63138.dtsi b/dts/src/arm/bcm63138.dtsi index e6a41e1b27..9c0325cf9e 100644 --- a/dts/src/arm/bcm63138.dtsi +++ b/dts/src/arm/bcm63138.dtsi @@ -41,9 +41,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <0>; - /* UBUS peripheral clock */ periph_clk: periph_clk { #clock-cells = <0>; @@ -94,7 +91,7 @@ reg = <0x1e000 0x100>; }; - gic: interrupt-controller@1e100 { + gic: interrupt-controller@1f000 { compatible = "arm,cortex-a9-gic"; reg = <0x1f000 0x1000 0x1e100 0x100>; @@ -125,7 +122,7 @@ IRQ_TYPE_LEVEL_HIGH)>; }; - armpll: armpll { + armpll: armpll@20000 { #clock-cells = <0>; compatible = "brcm,bcm63138-armpll"; clocks = <&periph_clk>; @@ -144,7 +141,7 @@ #reset-cells = <2>; }; - ahci: sata@8000 { + ahci: sata@a000 { compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci"; reg-names = "ahci", "top-ctrl"; reg = <0xa000 0x9ac>, <0x8040 0x24>; diff --git a/dts/src/arm/bcm7445-bcm97445svmb.dts b/dts/src/arm/bcm7445-bcm97445svmb.dts index 8006c69a3f..8313b7cad5 100644 --- a/dts/src/arm/bcm7445-bcm97445svmb.dts +++ b/dts/src/arm/bcm7445-bcm97445svmb.dts @@ -6,7 +6,7 @@ model = "Broadcom STB (bcm7445), SVMB reference board"; compatible = "brcm,bcm7445", "brcm,brcmstb"; - memory { + memory@0 { device_type = "memory"; reg = <0x00 0x00000000 0x00 0x40000000>, <0x00 0x40000000 0x00 0x40000000>, diff --git a/dts/src/arm/bcm7445.dtsi b/dts/src/arm/bcm7445.dtsi index 504a63236a..58f67c9b83 100644 --- a/dts/src/arm/bcm7445.dtsi +++ b/dts/src/arm/bcm7445.dtsi @@ -63,7 +63,7 @@ <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>; }; - rdb { + rdb@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -224,7 +224,7 @@ }; - memory_controllers { + memory_controllers@f1100000 { compatible = "simple-bus"; ranges = <0x0 0x0 0xf1100000 0x200000>; #address-cells = <1>; @@ -252,7 +252,7 @@ }; }; - memc@1 { + memc@80000 { compatible = "brcm,brcmstb-memc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -274,7 +274,7 @@ }; }; - memc@2 { + memc@100000 { compatible = "brcm,brcmstb-memc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/bcm911360_entphn.dts b/dts/src/arm/bcm911360_entphn.dts index 53f990defd..b2d323f4a5 100644 --- a/dts/src/arm/bcm911360_entphn.dts +++ b/dts/src/arm/bcm911360_entphn.dts @@ -49,8 +49,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; hook { label = "HOOK"; diff --git a/dts/src/arm/bcm947189acdbmr.dts b/dts/src/arm/bcm947189acdbmr.dts index 4991700ae6..b0b8c774a3 100644 --- a/dts/src/arm/bcm947189acdbmr.dts +++ b/dts/src/arm/bcm947189acdbmr.dts @@ -17,7 +17,7 @@ bootargs = "console=ttyS0,115200 earlycon"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x08000000>; }; @@ -43,8 +43,6 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; restart { label = "Reset"; diff --git a/dts/src/arm/bcm953012er.dts b/dts/src/arm/bcm953012er.dts index 250a1d6f2d..9574682246 100644 --- a/dts/src/arm/bcm953012er.dts +++ b/dts/src/arm/bcm953012er.dts @@ -39,15 +39,13 @@ model = "NorthStar Enterprise Router (BCM953012ER)"; compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x8000000>; }; gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; wps { label = "WPS"; diff --git a/dts/src/arm/bcm953012k.dts b/dts/src/arm/bcm953012k.dts index 52c4c6c9d3..046c59fb48 100644 --- a/dts/src/arm/bcm953012k.dts +++ b/dts/src/arm/bcm953012k.dts @@ -43,7 +43,7 @@ serial1 = &uart1; }; - memory { + memory@80000000 { device_type = "memory"; reg = <0x80000000 0x10000000>; }; diff --git a/dts/src/arm/bcm958522er.dts b/dts/src/arm/bcm958522er.dts index 21479b4ce8..8c388eb8a0 100644 --- a/dts/src/arm/bcm958522er.dts +++ b/dts/src/arm/bcm958522er.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/dts/src/arm/bcm958525er.dts b/dts/src/arm/bcm958525er.dts index cda3d79096..c339771bb2 100644 --- a/dts/src/arm/bcm958525er.dts +++ b/dts/src/arm/bcm958525er.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/dts/src/arm/bcm958525xmc.dts b/dts/src/arm/bcm958525xmc.dts index f86649812b..1c72ec8288 100644 --- a/dts/src/arm/bcm958525xmc.dts +++ b/dts/src/arm/bcm958525xmc.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; diff --git a/dts/src/arm/bcm958622hr.dts b/dts/src/arm/bcm958622hr.dts index df60602b05..96a021cebd 100644 --- a/dts/src/arm/bcm958622hr.dts +++ b/dts/src/arm/bcm958622hr.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/dts/src/arm/bcm958623hr.dts b/dts/src/arm/bcm958623hr.dts index 3893e7af34..b2c7f21d47 100644 --- a/dts/src/arm/bcm958623hr.dts +++ b/dts/src/arm/bcm958623hr.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/dts/src/arm/bcm958625hr.dts b/dts/src/arm/bcm958625hr.dts index cf226b0214..a2c9de35dd 100644 --- a/dts/src/arm/bcm958625hr.dts +++ b/dts/src/arm/bcm958625hr.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x20000000>; }; diff --git a/dts/src/arm/bcm958625k.dts b/dts/src/arm/bcm958625k.dts index 10b3d512bb..3fcca12d83 100644 --- a/dts/src/arm/bcm958625k.dts +++ b/dts/src/arm/bcm958625k.dts @@ -42,7 +42,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/dts/src/arm/bcm963138dvt.dts b/dts/src/arm/bcm963138dvt.dts index 29525686e5..5b177274f1 100644 --- a/dts/src/arm/bcm963138dvt.dts +++ b/dts/src/arm/bcm963138dvt.dts @@ -16,7 +16,7 @@ stdout-path = &serial0; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x08000000>; }; diff --git a/dts/src/arm/bcm988312hr.dts b/dts/src/arm/bcm988312hr.dts index e39db14d80..edd0f630e0 100644 --- a/dts/src/arm/bcm988312hr.dts +++ b/dts/src/arm/bcm988312hr.dts @@ -43,7 +43,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/dts/src/arm/da850-evm.dts b/dts/src/arm/da850-evm.dts index f2d2b87233..5b2b1ed04d 100644 --- a/dts/src/arm/da850-evm.dts +++ b/dts/src/arm/da850-evm.dts @@ -188,6 +188,19 @@ }; }; +&cpu { + cpu-supply = <&vdcdc3_reg>; +}; + +/* + * The standard da850-evm kits and SOM's are 375MHz so enable this operating + * point by default. Higher frequencies must be enabled for custom boards with + * other variants of the SoC. + */ +&opp_375 { + status = "okay"; +}; + &sata { status = "okay"; }; diff --git a/dts/src/arm/da850-lcdk.dts b/dts/src/arm/da850-lcdk.dts index 2fd2a6838d..e379d6e7ad 100644 --- a/dts/src/arm/da850-lcdk.dts +++ b/dts/src/arm/da850-lcdk.dts @@ -154,12 +154,48 @@ }; }; }; + + cvdd: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "cvdd"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; }; &ref_clk { clock-frequency = <24000000>; }; +&cpu { + cpu-supply = <&cvdd>; +}; + +/* + * LCDK has a fixed CVDD of 1.3V, so only operating points >= 300MHz are + * valid. Unfortunately due to a problem with the DA8XX OHCI controller, we + * can't enable more than one OPP by default, since the controller sometimes + * becomes unresponsive after a transition. Fix the frequency at 456 MHz. + */ + +&opp_100 { + status = "disabled"; +}; + +&opp_200 { + status = "disabled"; +}; + +&opp_300 { + status = "disabled"; +}; + +&opp_456 { + status = "okay"; +}; + &pmx_core { status = "okay"; diff --git a/dts/src/arm/da850-lego-ev3.dts b/dts/src/arm/da850-lego-ev3.dts index 09c3666def..afd04a4238 100644 --- a/dts/src/arm/da850-lego-ev3.dts +++ b/dts/src/arm/da850-lego-ev3.dts @@ -122,6 +122,15 @@ amp-supply = <&>; }; + cvdd: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "cvdd"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + /* * This is a 5V current limiting regulator that is shared by USB, * the sensor (input) ports, the motor (output) ports and the A/DC. @@ -201,6 +210,27 @@ clock-frequency = <24000000>; }; +&cpu { + cpu-supply = <&cvdd>; +}; + +/* since we have a fixed regulator, we can't run at these points */ +&opp_100 { + status = "disabled"; +}; + +&opp_200 { + status = "disabled"; +}; + +/* + * The SoC is actually the 456MHz version, but because of the fixed regulator + * This is the fastest we can go. + */ +&opp_375 { + status = "okay"; +}; + &pmx_core { status = "okay"; diff --git a/dts/src/arm/da850.dtsi b/dts/src/arm/da850.dtsi index e6e78b88ca..7cf31b6e48 100644 --- a/dts/src/arm/da850.dtsi +++ b/dts/src/arm/da850.dtsi @@ -16,6 +16,56 @@ reg = <0xc0000000 0x0>; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu: cpu@0 { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + reg = <0>; + clocks = <&psc0 14>; + operating-points-v2 = <&opp_table>; + }; + }; + + opp_table: opp-table { + compatible = "operating-points-v2"; + + opp_100: opp100-100000000 { + opp-hz = /bits/ 64 <100000000>; + opp-microvolt = <1000000 950000 1050000>; + }; + + opp_200: opp110-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <1100000 1050000 1160000>; + }; + + opp_300: opp120-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1200000 1140000 1320000>; + }; + + /* + * Original silicon was 300MHz max, so higher frequencies + * need to be enabled on a per-board basis if the chip is + * capable. + */ + + opp_375: opp120-375000000 { + status = "disabled"; + opp-hz = /bits/ 64 <375000000>; + opp-microvolt = <1200000 1140000 1320000>; + }; + + opp_456: opp130-456000000 { + status = "disabled"; + opp-hz = /bits/ 64 <456000000>; + opp-microvolt = <1300000 1250000 1350000>; + }; + }; + arm { #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/emev2-kzm9d.dts b/dts/src/arm/emev2-kzm9d.dts index abfff54d6d..0a27f034dd 100644 --- a/dts/src/arm/emev2-kzm9d.dts +++ b/dts/src/arm/emev2-kzm9d.dts @@ -25,7 +25,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial1:115200n8"; }; diff --git a/dts/src/arm/exynos3250-artik5.dtsi b/dts/src/arm/exynos3250-artik5.dtsi index ace50e194a..dee35e3a5c 100644 --- a/dts/src/arm/exynos3250-artik5.dtsi +++ b/dts/src/arm/exynos3250-artik5.dtsi @@ -59,6 +59,11 @@ cpu0-supply = <&buck2_reg>; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/exynos3250-monk.dts b/dts/src/arm/exynos3250-monk.dts index e25765500e..248bd372fe 100644 --- a/dts/src/arm/exynos3250-monk.dts +++ b/dts/src/arm/exynos3250-monk.dts @@ -172,6 +172,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; diff --git a/dts/src/arm/exynos3250-rinato.dts b/dts/src/arm/exynos3250-rinato.dts index 7479993755..86c26a4edf 100644 --- a/dts/src/arm/exynos3250-rinato.dts +++ b/dts/src/arm/exynos3250-rinato.dts @@ -244,6 +244,11 @@ }; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &i2c_0 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/exynos3250.dtsi b/dts/src/arm/exynos3250.dtsi index 8ce3a7786b..5659c4a107 100644 --- a/dts/src/arm/exynos3250.dtsi +++ b/dts/src/arm/exynos3250.dtsi @@ -462,6 +462,39 @@ status = "disabled"; }; + gpu: gpu@13000000 { + compatible = "samsung,exynos4210-mali", "arm,mali-400"; + reg = <0x13000000 0x10000>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + clocks = <&cmu CLK_G3D>, + <&cmu CLK_SCLK_G3D>; + clock-names = "bus", "core"; + power-domains = <&pd_g3d>; + status = "disabled"; + /* TODO: operating points for DVFS, assigned clock as 134 MHz */ + }; + mfc: codec@13400000 { compatible = "samsung,mfc-v7"; reg = <0x13400000 0x10000>; diff --git a/dts/src/arm/exynos4.dtsi b/dts/src/arm/exynos4.dtsi index 36ccf22743..1264cc431f 100644 --- a/dts/src/arm/exynos4.dtsi +++ b/dts/src/arm/exynos4.dtsi @@ -54,7 +54,7 @@ pmu: pmu { compatible = "arm,cortex-a9-pmu"; interrupt-parent = <&combiner>; - interrupts = <2 2>, <3 2>; + status = "disabled"; }; soc: soc { @@ -415,6 +415,20 @@ }; }; + gpu: gpu@13000000 { + compatible = "samsung,exynos4210-mali", "arm,mali-400"; + reg = <0x13000000 0x10000>; + /* + * CLK_G3D is not actually bus clock but a IP-level clock. + * The bus clock is not described in hardware manual. + */ + clocks = <&clock CLK_G3D>, + <&clock CLK_SCLK_G3D>; + clock-names = "bus", "core"; + power-domains = <&pd_g3d>; + status = "disabled"; + }; + i2s1: i2s@13960000 { compatible = "samsung,s3c6410-i2s"; reg = <0x13960000 0x100>; diff --git a/dts/src/arm/exynos4210-origen.dts b/dts/src/arm/exynos4210-origen.dts index 36b1edea25..0d1e1a9c2f 100644 --- a/dts/src/arm/exynos4210-origen.dts +++ b/dts/src/arm/exynos4210-origen.dts @@ -132,6 +132,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck3_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo3_reg>; vusb_a-supply = <&ldo8_reg>; diff --git a/dts/src/arm/exynos4210-trats.dts b/dts/src/arm/exynos4210-trats.dts index 6882480dba..7c39dd1c4d 100644 --- a/dts/src/arm/exynos4210-trats.dts +++ b/dts/src/arm/exynos4210-trats.dts @@ -239,6 +239,10 @@ status = "okay"; }; +&gpu { + status = "okay"; +}; + &hsotg { vusb_d-supply = <&vusb_reg>; vusb_a-supply = <&vusbdac_reg>; diff --git a/dts/src/arm/exynos4210-universal_c210.dts b/dts/src/arm/exynos4210-universal_c210.dts index bf092e97e1..82a8b54499 100644 --- a/dts/src/arm/exynos4210-universal_c210.dts +++ b/dts/src/arm/exynos4210-universal_c210.dts @@ -262,6 +262,11 @@ }; }; +&gpu { + mali-supply = <&buck2_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/dts/src/arm/exynos4210.dtsi b/dts/src/arm/exynos4210.dtsi index b491c345b2..f220716239 100644 --- a/dts/src/arm/exynos4210.dtsi +++ b/dts/src/arm/exynos4210.dtsi @@ -8,7 +8,7 @@ * www.linaro.org * * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210 - * based board files can include this file and provide values for board specfic + * based board files can include this file and provide values for board specific * bindings. * * Note: This file does not include device nodes for all the controllers in @@ -381,13 +381,13 @@ trips { cpu_alert0: cpu-alert-0 { - temperature = <85000>; /* millicelsius */ + temperature = <85000>; /* millicelsius */ }; cpu_alert1: cpu-alert-1 { - temperature = <100000>; /* millicelsius */ + temperature = <100000>; /* millicelsius */ }; cpu_alert2: cpu-alert-2 { - temperature = <110000>; /* millicelsius */ + temperature = <110000>; /* millicelsius */ }; }; }; @@ -449,6 +449,43 @@ samsung,lcd-wb; }; +&gpu { + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3"; + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <950000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <1050000>; + }; + }; +}; + &mdma1 { power-domains = <&pd_lcd0>; }; @@ -461,6 +498,12 @@ <&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>; }; +&pmu { + interrupts = <2 2>, <3 2>; + interrupt-affinity = <&cpu0>, <&cpu1>; + status = "okay"; +}; + &pmu_system_controller { clock-names = "clkout0", "clkout1", "clkout2", "clkout3", "clkout4", "clkout8", "clkout9"; diff --git a/dts/src/arm/exynos4412-galaxy-s3.dtsi b/dts/src/arm/exynos4412-galaxy-s3.dtsi index 30eee5942e..ce87d2ff27 100644 --- a/dts/src/arm/exynos4412-galaxy-s3.dtsi +++ b/dts/src/arm/exynos4412-galaxy-s3.dtsi @@ -15,6 +15,24 @@ i2c10 = &i2c_cm36651; }; + aat1290 { + compatible = "skyworks,aat1290"; + flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; + enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default", "host", "isp"; + pinctrl-0 = <&camera_flash_host>; + pinctrl-1 = <&camera_flash_host>; + pinctrl-2 = <&camera_flash_isp>; + + flash-led { + label = "flash"; + led-max-microamp = <520833>; + flash-max-microamp = <1012500>; + flash-max-timeout-us = <1940000>; + }; + }; + lcd_vdd3_reg: voltage-regulator-6 { compatible = "regulator-fixed"; regulator-name = "LCD_VDD_2.2V"; @@ -131,6 +149,20 @@ regulator-max-microvolt = <2800000>; }; +&pinctrl_0 { + camera_flash_host: camera-flash-host { + samsung,pins = "gpj1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-val = <0>; + }; + + camera_flash_isp: camera-flash-isp { + samsung,pins = "gpj1-0"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-val = <1>; + }; +}; + &s5c73m3 { standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ vdda-supply = <&ldo17_reg>; diff --git a/dts/src/arm/exynos4412-itop-scp-core.dtsi b/dts/src/arm/exynos4412-itop-scp-core.dtsi index 0038465f38..462a5409b1 100644 --- a/dts/src/arm/exynos4412-itop-scp-core.dtsi +++ b/dts/src/arm/exynos4412-itop-scp-core.dtsi @@ -115,6 +115,11 @@ cpu0-supply = <&buck2_reg>; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hsotg { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; diff --git a/dts/src/arm/exynos4412-midas.dtsi b/dts/src/arm/exynos4412-midas.dtsi index 4c15cb616c..83be3a7974 100644 --- a/dts/src/arm/exynos4412-midas.dtsi +++ b/dts/src/arm/exynos4412-midas.dtsi @@ -453,6 +453,11 @@ status = "okay"; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/dts/src/arm/exynos4412-odroid-common.dtsi b/dts/src/arm/exynos4412-odroid-common.dtsi index 08d3a0a7b4..ea55f377d1 100644 --- a/dts/src/arm/exynos4412-odroid-common.dtsi +++ b/dts/src/arm/exynos4412-odroid-common.dtsi @@ -229,6 +229,11 @@ assigned-clock-rates = <0>, <176000000>; }; +&gpu { + mali-supply = <&buck4_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/dts/src/arm/exynos4412-prime.dtsi b/dts/src/arm/exynos4412-prime.dtsi index d83fbd4e43..3731a225f7 100644 --- a/dts/src/arm/exynos4412-prime.dtsi +++ b/dts/src/arm/exynos4412-prime.dtsi @@ -38,3 +38,10 @@ cooling-device = <&cpu0 15 15>, <&cpu1 15 15>, <&cpu2 15 15>, <&cpu3 15 15>; }; + +&gpu_opp_table { + opp-533000000 { + opp-hz = /bits/ 64 <533000000>; + opp-microvolt = <1075000>; + }; +}; diff --git a/dts/src/arm/exynos4412.dtsi b/dts/src/arm/exynos4412.dtsi index e5c041ec07..d20db2dfe8 100644 --- a/dts/src/arm/exynos4412.dtsi +++ b/dts/src/arm/exynos4412.dtsi @@ -716,6 +716,53 @@ cpu-offset = <0x4000>; }; +&gpu { + interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", + "gpmmu", + "pp0", + "ppmmu0", + "pp1", + "ppmmu1", + "pp2", + "ppmmu2", + "pp3", + "ppmmu3", + "pmu"; + operating-points-v2 = <&gpu_opp_table>; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <875000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <900000>; + }; + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <950000>; + }; + opp-440000000 { + opp-hz = /bits/ 64 <440000000>; + opp-microvolt = <1025000>; + }; + }; +}; + &hdmi { compatible = "samsung,exynos4212-hdmi"; }; @@ -737,6 +784,8 @@ &pmu { interrupts = <2 2>, <3 2>, <18 2>, <19 2>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + status = "okay"; }; &pmu_system_controller { diff --git a/dts/src/arm/exynos5410-odroidxu.dts b/dts/src/arm/exynos5410-odroidxu.dts index 8f9e08f940..e0db251e25 100644 --- a/dts/src/arm/exynos5410-odroidxu.dts +++ b/dts/src/arm/exynos5410-odroidxu.dts @@ -85,6 +85,11 @@ }; }; +&adc { + vdd-supply = <&ldo10_reg>; + status = "okay"; +}; + &audi2s0 { status = "okay"; }; diff --git a/dts/src/arm/exynos5410.dtsi b/dts/src/arm/exynos5410.dtsi index 57fc9c949e..e6f78b1cee 100644 --- a/dts/src/arm/exynos5410.dtsi +++ b/dts/src/arm/exynos5410.dtsi @@ -260,6 +260,12 @@ }; }; +&adc { + clocks = <&clock CLK_TSADC>; + clock-names = "adc"; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + &arm_a15_pmu { interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; status = "okay"; diff --git a/dts/src/arm/exynos5420-arndale-octa.dts b/dts/src/arm/exynos5420-arndale-octa.dts index dbf0306896..592d7b45ec 100644 --- a/dts/src/arm/exynos5420-arndale-octa.dts +++ b/dts/src/arm/exynos5420-arndale-octa.dts @@ -386,6 +386,10 @@ * (Linaro for Arndale Octa, v2012.07). */ regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo4_reg: LDO4 { @@ -411,6 +415,10 @@ regulator-name = "PVDD_ANAIP_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo8_reg: LDO8 { @@ -451,6 +459,10 @@ regulator-name = "PVDD_APIO_MMCOFF_2V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo14_reg: LDO14 { @@ -464,12 +476,20 @@ regulator-name = "PVDD_PERI_2V8"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo16_reg: LDO16 { regulator-name = "PVDD_PERI_3V3"; regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo17_reg: LDO17 { @@ -483,12 +503,28 @@ regulator-name = "PVDD_EMMC_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + /* + * Must stay in "off" mode during shutdown for + * proper eMMC reset. The "off" mode is in + * fact controlled by LDO18EN. The eMMC does + * not have reset pin connected so the reset + * will be triggered by falling edge of + * LDO18EN. + */ + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo19_reg: LDO19 { regulator-name = "PVDD_TFLASH_2V8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo20_reg: LDO20 { @@ -515,12 +551,20 @@ regulator-min-microvolt = <800000>; regulator-max-microvolt = <1100000>; regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo24_reg: LDO24 { regulator-name = "PVDD_CAM1_AVDD_2V8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo25_reg: LDO25 { @@ -540,6 +584,10 @@ regulator-name = "PVDD_G3DS_1V0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1100000>; + + regulator-state-mem { + regulator-on-in-suspend; + }; }; ldo28_reg: LDO28 { @@ -615,55 +663,75 @@ buck1_reg: BUCK1 { regulator-name = "PVDD_MIF_1V1"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: BUCK2 { regulator-name = "vdd_arm"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck3_reg: BUCK3 { regulator-name = "PVDD_INT_1V0"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: BUCK4 { regulator-name = "PVDD_G3D_1V0"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck5_reg: BUCK5 { regulator-name = "PVDD_LPDDR3_1V2"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; regulator-always-on; }; buck6_reg: BUCK6 { regulator-name = "PVDD_KFC_1V0"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck7_reg: BUCK7 { regulator-name = "VIN_LLDO_1V4"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; regulator-always-on; }; buck8_reg: BUCK8 { regulator-name = "VIN_MLDO_2V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <2000000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; regulator-always-on; }; @@ -678,6 +746,18 @@ regulator-name = "PVDD_EMMCF_2V8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + /* + * Must stay in "off" mode during shutdown for + * proper eMMC reset. The "off" mode is in + * fact controlled by BUCK10EN. The eMMC does + * not have reset pin connected so the reset + * will be triggered by falling edge of + * BUCK10EN. + */ + + regulator-state-mem { + regulator-off-in-suspend; + }; }; }; }; @@ -700,7 +780,7 @@ samsung,dw-mshc-ddr-timing = <0 2>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; - vmmc-supply = <&ldo10_reg>; + vmmc-supply = <&ldo18_reg>; vqmmc-supply = <&ldo3_reg>; bus-width = <8>; cap-mmc-highspeed; diff --git a/dts/src/arm/exynos5420.dtsi b/dts/src/arm/exynos5420.dtsi index 5fb2326875..55d4dbf6f8 100644 --- a/dts/src/arm/exynos5420.dtsi +++ b/dts/src/arm/exynos5420.dtsi @@ -42,117 +42,119 @@ * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi. */ - soc: soc { - cluster_a15_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1250000>; - clock-latency-ns = <140000>; - }; - opp-1700000000 { - opp-hz = /bits/ 64 <1700000000>; - opp-microvolt = <1212500>; - clock-latency-ns = <140000>; - }; - opp-1600000000 { - opp-hz = /bits/ 64 <1600000000>; - opp-microvolt = <1175000>; - clock-latency-ns = <140000>; - }; - opp-1500000000 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <1137500>; - clock-latency-ns = <140000>; - }; - opp-1400000000 { - opp-hz = /bits/ 64 <1400000000>; - opp-microvolt = <1112500>; - clock-latency-ns = <140000>; - }; - opp-1300000000 { - opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1062500>; - clock-latency-ns = <140000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1037500>; - clock-latency-ns = <140000>; - }; - opp-1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1012500>; - clock-latency-ns = <140000>; - }; - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = < 987500>; - clock-latency-ns = <140000>; - }; - opp-900000000 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = < 962500>; - clock-latency-ns = <140000>; - }; - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = < 937500>; - clock-latency-ns = <140000>; - }; - opp-700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = < 912500>; - clock-latency-ns = <140000>; - }; + cluster_a15_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <140000>; + }; + opp-1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; + }; + opp-1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1175000>; + clock-latency-ns = <140000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1137500>; + clock-latency-ns = <140000>; + }; + opp-1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; + }; + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1037500>; + clock-latency-ns = <140000>; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1012500>; + clock-latency-ns = <140000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = < 987500>; + clock-latency-ns = <140000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = < 962500>; + clock-latency-ns = <140000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = < 937500>; + clock-latency-ns = <140000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = < 912500>; + clock-latency-ns = <140000>; }; + }; - cluster_a7_opp_table: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; - opp-1300000000 { - opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1275000>; - clock-latency-ns = <140000>; - }; - opp-1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1212500>; - clock-latency-ns = <140000>; - }; - opp-1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1162500>; - clock-latency-ns = <140000>; - }; - opp-1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1112500>; - clock-latency-ns = <140000>; - }; - opp-900000000 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = <1062500>; - clock-latency-ns = <140000>; - }; - opp-800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1025000>; - clock-latency-ns = <140000>; - }; - opp-700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <975000>; - clock-latency-ns = <140000>; - }; - opp-600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <937500>; - clock-latency-ns = <140000>; - }; + cluster_a7_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1275000>; + clock-latency-ns = <140000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; + }; + opp-1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1162500>; + clock-latency-ns = <140000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; + }; + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; + }; + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <140000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <975000>; + clock-latency-ns = <140000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <937500>; + clock-latency-ns = <140000>; }; + }; + soc: soc { cci: cci@10d20000 { compatible = "arm,cci-400"; #address-cells = <1>; @@ -548,18 +550,6 @@ status = "disabled"; }; - adc: adc@12d10000 { - compatible = "samsung,exynos-adc-v2"; - reg = <0x12D10000 0x100>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clock CLK_TSADC>; - clock-names = "adc"; - #io-channel-cells = <1>; - io-channel-ranges; - samsung,syscon-phandle = <&pmu_system_controller>; - status = "disabled"; - }; - hsi2c_8: i2c@12e00000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E00000 0x1000>; @@ -1363,6 +1353,12 @@ }; }; +&adc { + clocks = <&clock CLK_TSADC>; + clock-names = "adc"; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + &dp { clocks = <&clock CLK_DP1>; clock-names = "dp"; diff --git a/dts/src/arm/exynos5422-odroid-core.dtsi b/dts/src/arm/exynos5422-odroid-core.dtsi index 25d95de15c..829147e320 100644 --- a/dts/src/arm/exynos5422-odroid-core.dtsi +++ b/dts/src/arm/exynos5422-odroid-core.dtsi @@ -177,6 +177,10 @@ regulator-name = "vdd_adc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo5_reg: LDO5 { @@ -184,6 +188,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo6_reg: LDO6 { @@ -191,6 +199,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo7_reg: LDO7 { @@ -198,6 +210,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo8_reg: LDO8 { @@ -205,6 +221,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo9_reg: LDO9 { @@ -212,6 +232,10 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo10_reg: LDO10 { @@ -219,6 +243,10 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo11_reg: LDO11 { @@ -226,6 +254,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo12_reg: LDO12 { @@ -239,6 +271,10 @@ regulator-name = "vddq_mmc2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo14_reg: LDO14 { @@ -253,6 +289,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo16_reg: LDO16 { @@ -267,18 +307,30 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo18_reg: LDO18 { regulator-name = "vdd_emmc_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo19_reg: LDO19 { regulator-name = "vdd_sd"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo20_reg: LDO20 { @@ -307,6 +359,10 @@ regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo24_reg: LDO24 { @@ -328,6 +384,10 @@ regulator-name = "vdd_ldo26"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <3950000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo27_reg: LDO27 { @@ -335,6 +395,10 @@ regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo28_reg: LDO28 { @@ -342,6 +406,10 @@ regulator-name = "vdd_ldo28"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <3950000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; ldo29_reg: LDO29 { @@ -420,6 +488,10 @@ regulator-max-microvolt = <1300000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck2_reg: BUCK2 { @@ -428,6 +500,10 @@ regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck3_reg: BUCK3 { @@ -436,6 +512,10 @@ regulator-max-microvolt = <1400000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck4_reg: BUCK4 { @@ -444,6 +524,10 @@ regulator-max-microvolt = <1400000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck5_reg: BUCK5 { @@ -460,20 +544,24 @@ regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck7_reg: BUCK7 { - regulator-name = "vdd_1.0v_ldo"; - regulator-min-microvolt = <800000>; + regulator-name = "vdd_1.35v_ldo"; + regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; }; buck8_reg: BUCK8 { - regulator-name = "vdd_1.8v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <2000000>; + regulator-name = "vdd_2.0v_ldo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; regulator-always-on; regulator-boot-on; }; @@ -484,14 +572,20 @@ regulator-max-microvolt = <3750000>; regulator-always-on; regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; buck10_reg: BUCK10 { regulator-name = "vdd_vmem"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; - regulator-always-on; - regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; }; }; }; diff --git a/dts/src/arm/exynos5422-odroidxu3-common.dtsi b/dts/src/arm/exynos5422-odroidxu3-common.dtsi index 93a48f2dda..8388720374 100644 --- a/dts/src/arm/exynos5422-odroidxu3-common.dtsi +++ b/dts/src/arm/exynos5422-odroidxu3-common.dtsi @@ -360,6 +360,12 @@ }; }; +&buck10_reg { + /* Supplies vmmc-supply of mmc_0 */ + regulator-always-on; + regulator-boot-on; +}; + &hdmi { status = "okay"; ddc = <&i2c_2>; diff --git a/dts/src/arm/exynos54xx.dtsi b/dts/src/arm/exynos54xx.dtsi index ae866bcc30..0b27bebf95 100644 --- a/dts/src/arm/exynos54xx.dtsi +++ b/dts/src/arm/exynos54xx.dtsi @@ -96,6 +96,15 @@ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; }; + adc: adc@12d10000 { + compatible = "samsung,exynos-adc-v2"; + reg = <0x12d10000 0x100>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + /* i2c_0-3 are defined in exynos5.dtsi */ hsi2c_4: i2c@12ca0000 { compatible = "samsung,exynos5250-hsi2c"; diff --git a/dts/src/arm/gemini-dlink-dir-685.dts b/dts/src/arm/gemini-dlink-dir-685.dts index 3613f05f8a..bfaa2de63a 100644 --- a/dts/src/arm/gemini-dlink-dir-685.dts +++ b/dts/src/arm/gemini-dlink-dir-685.dts @@ -64,7 +64,7 @@ gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>; gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>; - cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; num-chipselects = <1>; panel: display@0 { diff --git a/dts/src/arm/hip04.dtsi b/dts/src/arm/hip04.dtsi index bf0cb55809..4263a9339c 100644 --- a/dts/src/arm/hip04.dtsi +++ b/dts/src/arm/hip04.dtsi @@ -347,7 +347,7 @@ /* non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell". */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -382,7 +382,7 @@ /* non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell". */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -417,7 +417,7 @@ /* non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell". */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -451,7 +451,7 @@ /* non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell". */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -482,7 +482,7 @@ }; funnel@0,e3c41000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xe3c41000 0 0x1000>; clocks = <&clk_375m>; @@ -531,7 +531,7 @@ }; funnel@0,e3c81000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xe3c81000 0 0x1000>; clocks = <&clk_375m>; @@ -580,7 +580,7 @@ }; funnel@0,e3cc1000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xe3cc1000 0 0x1000>; clocks = <&clk_375m>; @@ -629,7 +629,7 @@ }; funnel@0,e3d01000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xe3d01000 0 0x1000>; clocks = <&clk_375m>; @@ -678,7 +678,7 @@ }; funnel@0,e3c04000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xe3c04000 0 0x1000>; clocks = <&clk_375m>; diff --git a/dts/src/arm/ibm-power9-dual.dtsi b/dts/src/arm/ibm-power9-dual.dtsi new file mode 100644 index 0000000000..2abc42eda7 --- /dev/null +++ b/dts/src/arm/ibm-power9-dual.dtsi @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright 2018 IBM Corp + +&fsi { + cfam@0,0 { + reg = <0 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <0>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam0_i2c0: i2c-bus@0 { + reg = <0>; + }; + + cfam0_i2c1: i2c-bus@1 { + reg = <1>; + }; + + cfam0_i2c2: i2c-bus@2 { + reg = <2>; + }; + + cfam0_i2c3: i2c-bus@3 { + reg = <3>; + }; + + cfam0_i2c4: i2c-bus@4 { + reg = <4>; + }; + + cfam0_i2c5: i2c-bus@5 { + reg = <5>; + }; + + cfam0_i2c6: i2c-bus@6 { + reg = <6>; + }; + + cfam0_i2c7: i2c-bus@7 { + reg = <7>; + }; + + cfam0_i2c8: i2c-bus@8 { + reg = <8>; + }; + + cfam0_i2c9: i2c-bus@9 { + reg = <9>; + }; + + cfam0_i2c10: i2c-bus@a { + reg = <10>; + }; + + cfam0_i2c11: i2c-bus@b { + reg = <11>; + }; + + cfam0_i2c12: i2c-bus@c { + reg = <12>; + }; + + cfam0_i2c13: i2c-bus@d { + reg = <13>; + }; + + cfam0_i2c14: i2c-bus@e { + reg = <14>; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ0: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub0: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +&fsi_hub0 { + cfam@1,0 { + reg = <1 0>; + #address-cells = <1>; + #size-cells = <1>; + chip-id = <1>; + + scom@1000 { + compatible = "ibm,fsi2pib"; + reg = <0x1000 0x400>; + }; + + i2c@1800 { + compatible = "ibm,fsi-i2c-master"; + reg = <0x1800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + cfam1_i2c0: i2c-bus@0 { + reg = <0>; + }; + + cfam1_i2c1: i2c-bus@1 { + reg = <1>; + }; + + cfam1_i2c2: i2c-bus@2 { + reg = <2>; + }; + + cfam1_i2c3: i2c-bus@3 { + reg = <3>; + }; + + cfam1_i2c4: i2c-bus@4 { + reg = <4>; + }; + + cfam1_i2c5: i2c-bus@5 { + reg = <5>; + }; + + cfam1_i2c6: i2c-bus@6 { + reg = <6>; + }; + + cfam1_i2c7: i2c-bus@7 { + reg = <7>; + }; + + cfam1_i2c8: i2c-bus@8 { + reg = <8>; + }; + + cfam1_i2c9: i2c-bus@9 { + reg = <9>; + }; + + cfam1_i2c10: i2c-bus@a { + reg = <10>; + }; + + cfam1_i2c11: i2c-bus@b { + reg = <11>; + }; + + cfam1_i2c12: i2c-bus@c { + reg = <12>; + }; + + cfam1_i2c13: i2c-bus@d { + reg = <13>; + }; + + cfam1_i2c14: i2c-bus@e { + reg = <14>; + }; + }; + + sbefifo@2400 { + compatible = "ibm,p9-sbefifo"; + reg = <0x2400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + fsi_occ1: occ { + compatible = "ibm,p9-occ"; + }; + }; + + fsi_hub1: hub@3400 { + compatible = "fsi-master-hub"; + reg = <0x3400 0x400>; + #address-cells = <2>; + #size-cells = <0>; + + no-scan-on-init; + }; + }; +}; + +/* Legacy OCC numbering (to get rid of when userspace is fixed) */ +&fsi_occ0 { + reg = <1>; +}; + +&fsi_occ1 { + reg = <2>; +}; + +/ { + aliases { + i2c100 = &cfam0_i2c0; + i2c101 = &cfam0_i2c1; + i2c102 = &cfam0_i2c2; + i2c103 = &cfam0_i2c3; + i2c104 = &cfam0_i2c4; + i2c105 = &cfam0_i2c5; + i2c106 = &cfam0_i2c6; + i2c107 = &cfam0_i2c7; + i2c108 = &cfam0_i2c8; + i2c109 = &cfam0_i2c9; + i2c110 = &cfam0_i2c10; + i2c111 = &cfam0_i2c11; + i2c112 = &cfam0_i2c12; + i2c113 = &cfam0_i2c13; + i2c114 = &cfam0_i2c14; + i2c200 = &cfam1_i2c0; + i2c201 = &cfam1_i2c1; + i2c202 = &cfam1_i2c2; + i2c203 = &cfam1_i2c3; + i2c204 = &cfam1_i2c4; + i2c205 = &cfam1_i2c5; + i2c206 = &cfam1_i2c6; + i2c207 = &cfam1_i2c7; + i2c208 = &cfam1_i2c8; + i2c209 = &cfam1_i2c9; + i2c210 = &cfam1_i2c10; + i2c211 = &cfam1_i2c11; + i2c212 = &cfam1_i2c12; + i2c213 = &cfam1_i2c13; + i2c214 = &cfam1_i2c14; + }; +}; diff --git a/dts/src/arm/imx53-m53menlo.dts b/dts/src/arm/imx53-m53menlo.dts index f0a3fde073..10acc5331b 100644 --- a/dts/src/arm/imx53-m53menlo.dts +++ b/dts/src/arm/imx53-m53menlo.dts @@ -10,6 +10,25 @@ model = "MENLO M53 EMBEDDED DEVICE"; compatible = "menlo,m53menlo", "fsl,imx53"; + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pinctrl_power_button>; + pinctrl-names = "default"; + + power-button { + label = "Power button"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pinctrl_power_out>; + pinctrl-names = "default"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -30,7 +49,7 @@ eth { label = "EthLedYe"; gpios = <&gpio2 11 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; + linux,default-trigger = "netdev"; }; }; @@ -45,12 +64,19 @@ }; }; + beeper { + compatible = "gpio-beeper"; + pinctrl-0 = <&pinctrl_beeper>; + gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; + }; + reg_usbh1_vbus: regulator-usbh1-vbus { compatible = "regulator-fixed"; regulator-name = "vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + enable-active-high; }; }; @@ -74,6 +100,25 @@ assigned-clock-rates = <133333334>, <33333334>, <33333334>; }; +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio2 27 GPIO_ACTIVE_HIGH>; + status = "okay"; + + spidev@0 { + compatible = "menlo,m53cpld"; + spi-max-frequency = <25000000>; + reg = <0>; + }; + + spidev@1 { + compatible = "menlo,m53cpld"; + spi-max-frequency = <25000000>; + reg = <1>; + }; +}; + &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; @@ -86,9 +131,82 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; phy-mode = "rmii"; + phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>; status = "okay"; }; +&gpio1 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio2 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "TestPin_SV2_3", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio3 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "", + "", "CPLD_JTAG_TDO", "", ""; +}; + +&gpio5 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "CPLD_JTAG_TCK", "KBD_intK", + "CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]", + "CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]", + "CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI"; +}; + +&gpio6 { + gpio-line-names = + "", "", "", "", + "CPLD_reset", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpio7 { + gpio-line-names = + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "USB-OTG_OverCurrent", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -136,27 +254,37 @@ imx53-m53evk { hoggrp { fsl,pins = < - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 - MX53_PAD_EIM_EB3__GPIO2_31 0x1d5 - MX53_PAD_PATA_DA_0__GPIO7_6 0x1d5 - MX53_PAD_GPIO_19__CCM_CLKO 0x1d5 - MX53_PAD_CSI0_MCLK__CCM_CSI0_MCLK 0x1d5 - MX53_PAD_CSI0_DAT4__GPIO5_22 0x1d5 - MX53_PAD_CSI0_DAT5__GPIO5_23 0x1d5 - MX53_PAD_CSI0_DAT6__GPIO5_24 0x1d5 - MX53_PAD_CSI0_DAT7__GPIO5_25 0x1d5 - MX53_PAD_CSI0_DAT8__GPIO5_26 0x1d5 - MX53_PAD_CSI0_DAT9__GPIO5_27 0x1d5 - MX53_PAD_CSI0_DAT10__GPIO5_28 0x1d5 - MX53_PAD_CSI0_DAT11__GPIO5_29 0x1d5 - MX53_PAD_CSI0_DAT14__GPIO6_0 0x1d5 + MX53_PAD_GPIO_19__CCM_CLKO 0x1e4 + MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1e4 + MX53_PAD_CSI0_DAT4__GPIO5_22 0x1e4 + MX53_PAD_CSI0_DAT5__GPIO5_23 0x1c4 + MX53_PAD_CSI0_DAT6__GPIO5_24 0x1e4 + MX53_PAD_CSI0_DAT7__GPIO5_25 0x1e4 + MX53_PAD_CSI0_DAT8__GPIO5_26 0x1e4 + MX53_PAD_CSI0_DAT9__GPIO5_27 0x1c4 + MX53_PAD_CSI0_DAT10__GPIO5_28 0x1e4 + MX53_PAD_CSI0_DAT11__GPIO5_29 0x1e4 + MX53_PAD_PATA_DATA11__GPIO2_11 0x1e4 + MX53_PAD_EIM_D24__GPIO3_24 0x1e4 + MX53_PAD_EIM_D25__GPIO3_25 0x1e4 + MX53_PAD_EIM_D29__GPIO3_29 0x1e4 + MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1e4 + MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1e4 + MX53_PAD_CSI0_DAT18__GPIO6_4 0x1c4 + MX53_PAD_PATA_DATA8__GPIO2_8 0x1e4 >; }; pinctrl_led: ledgrp { fsl,pins = < - MX53_PAD_CSI0_DAT15__GPIO6_1 0x1d5 - MX53_PAD_CSI0_DAT16__GPIO6_2 0x1d5 + MX53_PAD_CSI0_DAT15__GPIO6_1 0x1c4 + MX53_PAD_CSI0_DAT16__GPIO6_2 0x1c4 + >; + }; + + pinctrl_beeper: beepergrp { + fsl,pins = < + MX53_PAD_CSI0_DAT17__GPIO6_3 0x1c4 >; }; @@ -169,49 +297,66 @@ pinctrl_can2: can2grp { fsl,pins = < - MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1c4 + MX53_PAD_KEY_COL4__CAN2_TXCAN 0x1e4 MX53_PAD_KEY_ROW4__CAN2_RXCAN 0x1c4 >; }; pinctrl_display_gpio: display-gpiogrp { fsl,pins = < - MX53_PAD_CSI0_DAT12__GPIO5_30 0x1d5 /* Reset */ - MX53_PAD_CSI0_DAT13__GPIO5_31 0x1d5 /* Interrupt */ + MX53_PAD_CSI0_DAT12__GPIO5_30 0x1c4 /* Reset */ + MX53_PAD_CSI0_MCLK__GPIO5_19 0x1e4 /* Int-K */ + MX53_PAD_CSI0_DAT13__GPIO5_31 0x1c4 /* Int-I */ + + MX53_PAD_CSI0_DAT14__GPIO6_0 0x1c4 /* Power down */ >; }; pinctrl_edt_ft5x06: edt-ft5x06grp { fsl,pins = < - MX53_PAD_PATA_DATA9__GPIO2_9 0x1d5 /* Reset */ - MX53_PAD_CSI0_DAT19__GPIO6_5 0x1d5 /* Interrupt */ - MX53_PAD_PATA_DATA10__GPIO2_10 0x1d5 /* Wake */ + MX53_PAD_PATA_DATA9__GPIO2_9 0x1e4 /* Reset */ + MX53_PAD_CSI0_DAT19__GPIO6_5 0x1c4 /* Interrupt */ + MX53_PAD_PATA_DATA10__GPIO2_10 0x1e4 /* Wake */ + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX53_PAD_EIM_CS0__ECSPI2_SCLK 0xe4 + MX53_PAD_EIM_OE__ECSPI2_MISO 0xe4 + MX53_PAD_EIM_CS1__ECSPI2_MOSI 0xe4 + MX53_PAD_EIM_RW__GPIO2_26 0xe4 + MX53_PAD_EIM_LBA__GPIO2_27 0xe4 >; }; pinctrl_esdhc1: esdhc1grp { fsl,pins = < - MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 - MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5 - MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5 - MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5 - MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5 - MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5 + MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1e4 + MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1e4 + MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1e4 + MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1e4 + MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1e4 + MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1e4 + MX53_PAD_GPIO_1__GPIO1_1 0x1c4 + MX53_PAD_GPIO_9__GPIO1_9 0x1e4 >; }; pinctrl_fec: fecgrp { fsl,pins = < - MX53_PAD_FEC_MDC__FEC_MDC 0x4 - MX53_PAD_FEC_MDIO__FEC_MDIO 0x1fc - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x180 - MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x180 - MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x180 - MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x180 - MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x180 - MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x4 - MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x4 - MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x4 + MX53_PAD_FEC_MDC__FEC_MDC 0x1e4 + MX53_PAD_FEC_MDIO__FEC_MDIO 0x1e4 + MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x1e4 + MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x1e4 + MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x1e4 + MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x1e4 + MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x1e4 + MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x1c4 + MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x1e4 + MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x1e4 + MX53_PAD_PATA_DA_1__GPIO7_7 0x1e4 + MX53_PAD_EIM_EB3__GPIO2_31 0x1e4 >; }; @@ -240,10 +385,24 @@ >; }; + pinctrl_power_button: powerbutgrp { + fsl,pins = < + MX53_PAD_SD2_DATA2__GPIO1_13 0x1e4 + >; + }; + + pinctrl_power_out: poweroutgrp { + fsl,pins = < + MX53_PAD_SD2_DATA0__GPIO1_15 0x1e4 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX53_PAD_PATA_DIOW__UART1_TXD_MUX 0x1e4 MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4 + MX53_PAD_PATA_IORDY__UART1_RTS 0x1e4 + MX53_PAD_PATA_RESET_B__UART1_CTS 0x1e4 >; }; @@ -251,13 +410,25 @@ fsl,pins = < MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4 MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4 + MX53_PAD_PATA_DIOR__UART2_RTS 0x1e4 + MX53_PAD_PATA_INTRQ__UART2_CTS 0x1e4 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4 + MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4 + MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4 >; }; pinctrl_usb: usbgrp { fsl,pins = < - MX53_PAD_GPIO_2__GPIO1_2 0x1d5 - MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1d5 + MX53_PAD_GPIO_2__GPIO1_2 0x1c4 + MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x1c4 + MX53_PAD_GPIO_4__GPIO1_4 0x1c4 + MX53_PAD_GPIO_18__GPIO7_13 0x1c4 >; }; }; @@ -287,12 +458,21 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + linux,rs485-enabled-at-boot-time; status = "okay"; }; @@ -301,7 +481,7 @@ pinctrl-0 = <&pinctrl_usb>; vbus-supply = <®_usbh1_vbus>; phy_type = "utmi"; - dr_mode = "peripheral"; + dr_mode = "host"; status = "okay"; }; diff --git a/dts/src/arm/imx53-smd.dts b/dts/src/arm/imx53-smd.dts index 09071ca11c..ec9fb8940f 100644 --- a/dts/src/arm/imx53-smd.dts +++ b/dts/src/arm/imx53-smd.dts @@ -185,6 +185,31 @@ >; }; + pinctrl_ipu_csi0: ipucsi0grp { + fsl,pins = < + MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 0x1c4 + MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 0x1c4 + MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 0x1c4 + MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 0x1c4 + MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 0x1c4 + MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 0x1c4 + MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 0x1c4 + MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 0x1c4 + MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4 + MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC 0x1e4 + MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC 0x1e4 + MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4 + >; + }; + + pinctrl_ov5642: ov5642grp { + fsl,pins = < + MX53_PAD_NANDF_WP_B__GPIO6_9 0x1e4 + MX53_PAD_NANDF_RB0__GPIO6_10 0x1e4 + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4 @@ -256,11 +281,47 @@ camera: ov5642@3c { compatible = "ovti,ov5642"; reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5642>; + assigned-clocks = <&clks IMX5_CLK_SSI_EXT1_SEL>, + <&clks IMX5_CLK_SSI_EXT1_COM_SEL>; + assigned-clock-parents = <&clks IMX5_CLK_PLL2_SW>, + <&clks IMX5_CLK_SSI_EXT1_PODF>; + assigned-clock-rates = <0>, <24000000>; + clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>; + clock-names = "xclk"; + DVDD-supply = <&ldo9_reg>; + AVDD-supply = <&ldo7_reg>; + reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; + powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; + + port { + ov5642_to_ipu_csi0: endpoint { + remote-endpoint = <&ipu_csi0_from_parallel_sensor>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; }; pmic: dialog@48 { compatible = "dlg,da9053", "dlg,da9052"; reg = <0x48>; + interrupt-parent = <&gpio7>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + + regulators { + ldo7_reg: ldo7 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + }; + + ldo9_reg: ldo9 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3650000>; + }; + }; }; }; @@ -271,3 +332,15 @@ phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&ipu_csi0_from_parallel_sensor { + remote-endpoint = <&ov5642_to_ipu_csi0>; + data-shift = <12>; /* Lines 19:12 used */ + hsync-active = <1>; + vsync-active = <1>; +}; + +&ipu_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_csi0>; +}; diff --git a/dts/src/arm/imx53.dtsi b/dts/src/arm/imx53.dtsi index 9b672ed248..ed341cfd9d 100644 --- a/dts/src/arm/imx53.dtsi +++ b/dts/src/arm/imx53.dtsi @@ -31,6 +31,7 @@ i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; + ipu0 = &ipu; mmc0 = &esdhc1; mmc1 = &esdhc2; mmc2 = &esdhc3; @@ -71,6 +72,11 @@ ports = <&ipu_di0>, <&ipu_di1>; }; + capture_subsystem { + compatible = "fsl,imx-capture-subsystem"; + ports = <&ipu_csi0>, <&ipu_csi1>; + }; + tzic: tz-interrupt-controller@fffc000 { compatible = "fsl,imx53-tzic", "fsl,tzic"; interrupt-controller; @@ -158,10 +164,16 @@ ipu_csi0: port@0 { reg = <0>; + + ipu_csi0_from_parallel_sensor: endpoint { + }; }; ipu_csi1: port@1 { reg = <1>; + + ipu_csi1_from_parallel_sensor: endpoint { + }; }; ipu_di0: port@2 { diff --git a/dts/src/arm/imx6dl-kontron-samx6i.dtsi b/dts/src/arm/imx6dl-kontron-samx6i.dtsi new file mode 100644 index 0000000000..a864fdbd5f --- /dev/null +++ b/dts/src/arm/imx6dl-kontron-samx6i.dtsi @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de> + */ + +#include "imx6dl.dtsi" +#include "imx6qdl-kontron-samx6i.dtsi" + +/ { + model = "Kontron SMARC sAMX6i Dual-Lite/Solo"; + compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl"; +}; diff --git a/dts/src/arm/imx6q-kontron-samx6i.dtsi b/dts/src/arm/imx6q-kontron-samx6i.dtsi new file mode 100644 index 0000000000..2618eccfe5 --- /dev/null +++ b/dts/src/arm/imx6q-kontron-samx6i.dtsi @@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de> + */ + +#include "imx6q.dtsi" +#include "imx6qdl-kontron-samx6i.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Kontron SMARC sAMX6i Quad/Dual"; + compatible = "kontron,imx6q-samx6i", "fsl,imx6q"; +}; + +/* Quad/Dual SoMs have 3 chip-select signals */ +&ecspi4 { + fsl,spi-num-chipselects = <3>; + cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>, + <&gpio3 29 GPIO_ACTIVE_HIGH>, + <&gpio3 25 GPIO_ACTIVE_HIGH>; +}; + +&pinctrl_ecspi4 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + + /* SPI4_IMX_CS2# - connected to internal flash */ + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0 + /* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + /* SPI4_CS3# - connected to SMARC SPI0_CS1# */ + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0 + >; +}; diff --git a/dts/src/arm/imx6qdl-kontron-samx6i.dtsi b/dts/src/arm/imx6qdl-kontron-samx6i.dtsi new file mode 100644 index 0000000000..81c7ebb4b3 --- /dev/null +++ b/dts/src/arm/imx6qdl-kontron-samx6i.dtsi @@ -0,0 +1,815 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 +/* + * Copyright 2017 (C) Priit Laes <plaes@plaes.org> + * Copyright 2018 (C) Pengutronix, Michael Grzeschik <mgr@pengutronix.de> + * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de> + * + * Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/fsl-imx-audmux.h> + +/ { + reg_1p0v_s0: regulator-1p0v-s0 { + compatible = "regulator-fixed"; + regulator-name = "V_1V0_S0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_smarc_suppy>; + }; + + reg_1p35v_vcoredig_s5: regulator-1p35v-vcoredig-s5 { + compatible = "regulator-fixed"; + regulator-name = "V_1V35_VCOREDIG_S5"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_3p3v_s5>; + }; + + reg_1p8v_s5: regulator-1p8v-s5 { + compatible = "regulator-fixed"; + regulator-name = "V_1V8_S5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_3p3v_s5>; + }; + + reg_3p3v_s0: regulator-3p3v-s0 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_S0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_3p3v_s5>; + }; + + reg_3p3v_s0: regulator-3p3v-s0 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_S0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_3p3v_s5>; + }; + + reg_3p3v_s5: regulator-3p3v-s5 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_S5"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <®_smarc_suppy>; + }; + + reg_smarc_lcdbklt: regulator-smarc-lcdbklt { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdbklt_en>; + regulator-name = "LCD_BKLT_EN"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_smarc_lcdvdd: regulator-smarc-lcdvdd { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdvdd_en>; + regulator-name = "LCD_VDD_EN"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_smarc_rtc: regulator-smarc-rtc { + compatible = "regulator-fixed"; + regulator-name = "V_IN_RTC_BATT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + /* Module supply range can be 3.00V ... 5.25V */ + reg_smarc_suppy: regulator-smarc-supply { + compatible = "regulator-fixed"; + regulator-name = "V_IN_WIDE"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + lcd: lcd { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx-parallel-display"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + status = "disabled"; + + port@0 { + reg = <0>; + + lcd_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + + lcd_out: endpoint { + }; + }; + }; + + lcd_backlight: lcd-backlight { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + pwm-names = "LCD_BKLT_PWM"; + + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <4>; + + power-supply = <®_smarc_lcdbklt>; + status = "disabled"; + }; + + i2c_intern: i2c-gpio-intern { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio_intern>; + sda-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c_lcd: i2c-gpio-lcd { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio_lcd>; + sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabld"; + }; + + i2c_cam: i2c-gpio-cam { + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c_gpio_cam>; + sda-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabld"; + }; +}; + +/* I2S0, I2S1 */ +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + + audmux_ssi1 { + fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) | + IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT3) | + IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT3) + >; + }; + + audmux_adu3 { + fsl,audmux-port = <MX51_AUDMUX_PORT3>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0) + >; + }; + + audmux_ssi2 { + fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) | + IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) | + IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4) + >; + }; + + audmux_adu4 { + fsl,audmux-port = <MX51_AUDMUX_PORT4>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT2_SSI1) + >; + }; +}; + +/* CAN0 */ +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; +}; + +/* CAN1 */ +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; +}; + +/* SPI1 */ +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, + <&gpio2 27 GPIO_ACTIVE_HIGH>; +}; + +/* SPI0 */ +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>, + <&gpio3 29 GPIO_ACTIVE_HIGH>; + status = "okay"; + + /* default boot source: workaround #1 for errata ERR006282 */ + smarc_flash: spi-flash@0 { + compatible = "winbond,w25q16dw", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + }; +}; + +/* GBE */ +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; +}; + +&i2c_intern { + pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + reg_v_core_s0: sw1ab { + regulator-name = "V_CORE_S0"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vddsoc_s0: sw1c { + regulator-name = "V_VDDSOC_S0"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p15v_s0: sw2 { + regulator-name = "V_3V15_S0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* sw3a/b is used in dual mode, but driver does not + * support it. Although, there's no need to control + * DDR power - so just leaving dummy entries for sw3a + * and sw3b for now. + */ + sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_1p8v_s0: sw4 { + regulator-name = "V_1V8_S0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + /* Regulator for USB */ + reg_5p0v_s0: swbst { + regulator-name = "V_5V0_S0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + }; + + reg_vsnvs: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vrefddr: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + /* + * Per schematics, of all VGEN's, only VGEN5 has some + * usage ... but even that - over DNI resistor + */ + vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + reg_2p5v_s0: vgen5 { + regulator-name = "V_2V5_S0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +/* I2C_GP */ +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; +}; + +/* HDMI_CTRL */ +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; +}; + +/* I2C_PM */ +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + smarc_eeprom: eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mgmt_gpios &pinctrl_gpio>; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x130b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0 + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0 + + /* AUDIO MCLK */ + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x000b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 /* CS0 */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 /* CS1 */ + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + + /* SPI_IMX_CS2# - connected to internal flash */ + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0 + /* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b0 /* GPIO0 / CAM0_PWR# */ + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b0 /* GPIO1 / CAM1_PWR# */ + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b0 /* GPIO2 / CAM0_RST# */ + MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b0 /* GPIO3 / CAM1_RST# */ + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b0 /* GPIO4 / HDA_RST# */ + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b0 /* GPIO5 / PWM_OUT */ + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b0 /* GPIO6 / TACHIN */ + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b0 /* GPIO7 / PCAM_FLD */ + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b0 /* GPIO8 / CAN0_ERR# */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b0 /* GPIO9 / CAN1_ERR# */ + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b0 /* GPIO10 */ + MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b0 /* GPIO11 */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* RST_GBE0_PHY# */ + >; + }; + + pinctrl_i2c_gpio_cam: i2c-gpiocamgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 /* SCL */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* SDA */ + >; + }; + + pinctrl_i2c_gpio_intern: i2c-gpiointerngrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0 /* SCL */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* SDA */ + >; + }; + + pinctrl_i2c_gpio_lcd: i2c-gpiolcdgrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 /* SCL */ + MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0 /* SDA */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100f1 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100f1 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100f1 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100f1 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100f1 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100f1 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100f1 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100f1 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100f1 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100f1 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100f1 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100f1 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100f1 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100f1 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100f1 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100f1 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100f1 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100f1 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x100f1 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x100f1 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x100f1 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x100f1 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x100f1 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x100f1 + + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f1 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100f1 /* DE */ + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100f1 /* HSYNC */ + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100f1 /* VSYNC */ + >; + }; + + pinctrl_lcdbklt_en: lcdbkltengrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b1 + >; + }; + + pinctrl_lcdvdd_en: lcdvddengrp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 + >; + }; + + pinctrl_mipi_csi: mipi-csigrp { + fsl,pins = < + MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x000b0 /* CSI0/1 MCLK */ + >; + }; + + pinctrl_mgmt_gpios: mgmt-gpiosgrp { + fsl,pins = < + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 /* LID# */ + MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x1b0b0 /* SLEEP# */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 /* CHARGING# */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* CHARGER_PRSNT# */ + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x1b0b0 /* CARRIER_STBY# */ + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* BATLOW# */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b0 /* TEST# */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 /* VDD_IO_SEL_D# */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 /* POWER_BTN# */ + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x1b0b0 /* PCI_A_PRSNT# */ + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 /* RST_PCIE_A# */ + MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* PCIE_WAKE# */ + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1f8b0 + /* power, oc muxed but not used by the driver */ + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 /* USB power */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0 /* USB OC */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x17059 + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */ + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */ + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059 + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_wdog1: wdog1rp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0 + >; + }; +}; + +&mipi_csi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mipi_csi>; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; +}; + +/* LCD_BKLT_PWM */ +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; +}; + +®_arm { + vin-supply = <®_v_core_s0>; +}; + +®_pu { + vin-supply = <®_vddsoc_s0>; +}; + +®_soc { + vin-supply = <®_vddsoc_s0>; +}; + +/* SER0 */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; +}; + +/* SER1 */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; +}; + +/* SER2 */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + uart-has-rtscts; +}; + +/* SER3 */ +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; +}; + +/* USB0 */ +&usbotg { + /* + * no 'imx6-usb-charger-detection' + * since USB_OTG_CHD_B pin is not wired + */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; +}; + +/* USB1/2 via hub */ +&usbh1 { + vbus-supply = <®_5p0v_s0>; +}; + +/* SDIO */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + no-1-8-v; +}; + +/* SDMMC */ +&usdhc4 { + /* Internal eMMC, optional on some boards */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + no-sdio; + no-sd; + non-removable; + vmmc-supply = <®_3p3v_s0>; + vqmmc-supply = <®_1p8v_s0>; +}; + +&wdog1 { + /* CPLD is feeded by watchdog (hardwired) */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog1>; + status = "okay"; +}; diff --git a/dts/src/arm/imx6qdl-sabresd.dtsi b/dts/src/arm/imx6qdl-sabresd.dtsi index 185fb17a35..71ca76a5e4 100644 --- a/dts/src/arm/imx6qdl-sabresd.dtsi +++ b/dts/src/arm/imx6qdl-sabresd.dtsi @@ -745,10 +745,26 @@ vin-supply = <&sw1c_reg>; }; +®_vdd1p1 { + vin-supply = <&vgen5_reg>; +}; + +®_vdd3p0 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&vgen5_reg>; +}; + &snvs_poweroff { status = "okay"; }; +&snvs_pwrkey { + status = "okay"; +}; + &ssi2 { status = "okay"; }; diff --git a/dts/src/arm/imx6qdl.dtsi b/dts/src/arm/imx6qdl.dtsi index b3a77bcf00..4b801935ca 100644 --- a/dts/src/arm/imx6qdl.dtsi +++ b/dts/src/arm/imx6qdl.dtsi @@ -675,14 +675,14 @@ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_DUMMY>; + clocks = <&clks IMX6QDL_CLK_IPG>; }; wdog2: wdog@20c0000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6QDL_CLK_DUMMY>; + clocks = <&clks IMX6QDL_CLK_IPG>; status = "disabled"; }; @@ -701,7 +701,7 @@ <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>; - regulator-1p1 { + reg_vdd1p1: regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <1000000>; @@ -716,7 +716,7 @@ anatop-enable-bit = <0>; }; - regulator-3p0 { + reg_vdd3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -731,7 +731,7 @@ anatop-enable-bit = <0>; }; - regulator-2p5 { + reg_vdd2p5: regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2250000>; @@ -841,6 +841,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; snvs_lpgpr: snvs-lpgpr { diff --git a/dts/src/arm/imx6sl-evk.dts b/dts/src/arm/imx6sl-evk.dts index f7a48e4622..4829aa682a 100644 --- a/dts/src/arm/imx6sl-evk.dts +++ b/dts/src/arm/imx6sl-evk.dts @@ -580,6 +580,18 @@ status = "okay"; }; +®_vdd1p1 { + vin-supply = <&sw2_reg>; +}; + +®_vdd3p0 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&sw2_reg>; +}; + &snvs_poweroff { status = "okay"; }; diff --git a/dts/src/arm/imx6sl.dtsi b/dts/src/arm/imx6sl.dtsi index 9ddbeea64b..b36fc012ff 100644 --- a/dts/src/arm/imx6sl.dtsi +++ b/dts/src/arm/imx6sl.dtsi @@ -495,7 +495,7 @@ compatible = "fsl,imx6sl-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_DUMMY>; + clocks = <&clks IMX6SL_CLK_IPG>; status = "disabled"; }; @@ -503,14 +503,14 @@ compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_DUMMY>; + clocks = <&clks IMX6SL_CLK_IPG>; }; wdog2: wdog@20c0000 { compatible = "fsl,imx6sl-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX6SL_CLK_DUMMY>; + clocks = <&clks IMX6SL_CLK_IPG>; status = "disabled"; }; @@ -531,7 +531,7 @@ <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>; - regulator-1p1 { + reg_vdd1p1: regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <1000000>; @@ -546,7 +546,7 @@ anatop-enable-bit = <0>; }; - regulator-3p0 { + reg_vdd3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -561,7 +561,7 @@ anatop-enable-bit = <0>; }; - regulator-2p5 { + reg_vdd2p5: regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2250000>; diff --git a/dts/src/arm/imx6sll-evk.dts b/dts/src/arm/imx6sll-evk.dts index 4a31a415f8..3e1d32fdf4 100644 --- a/dts/src/arm/imx6sll-evk.dts +++ b/dts/src/arm/imx6sll-evk.dts @@ -265,6 +265,18 @@ status = "okay"; }; +®_3p0 { + vin-supply = <&sw2_reg>; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/dts/src/arm/imx6sll.dtsi b/dts/src/arm/imx6sll.dtsi index 1b4899f0fc..b0a77ff70b 100644 --- a/dts/src/arm/imx6sll.dtsi +++ b/dts/src/arm/imx6sll.dtsi @@ -568,6 +568,7 @@ regmap = <&snvs>; offset = <0x38>; mask = <0x61>; + status = "disabled"; }; snvs_pwrkey: snvs-powerkey { @@ -576,6 +577,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; }; diff --git a/dts/src/arm/imx6sx-sdb-reva.dts b/dts/src/arm/imx6sx-sdb-reva.dts index 00c4854823..f1830ed387 100644 --- a/dts/src/arm/imx6sx-sdb-reva.dts +++ b/dts/src/arm/imx6sx-sdb-reva.dts @@ -154,3 +154,19 @@ enable-active-high; vin-supply = <®_can_en>; }; + +®_vdd1p1 { + vin-supply = <&vgen6_reg>; +}; + +®_vdd3p0 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&vgen6_reg>; +}; + +&snvs_pwrkey { + status = "okay"; +}; diff --git a/dts/src/arm/imx6sx-sdb.dts b/dts/src/arm/imx6sx-sdb.dts index 998e3e13a0..a8ee7087af 100644 --- a/dts/src/arm/imx6sx-sdb.dts +++ b/dts/src/arm/imx6sx-sdb.dts @@ -137,7 +137,23 @@ vin-supply = <&sw1a_reg>; }; +®_vdd1p1 { + vin-supply = <&vgen6_reg>; +}; + +®_vdd3p0 { + vin-supply = <&sw2_reg>; +}; + +®_vdd2p5 { + vin-supply = <&vgen6_reg>; +}; + ®_can_stby { /* Transceiver EN/STBY is active low on RevB board */ gpio = <&gpio4 27 GPIO_ACTIVE_LOW>; }; + +&snvs_pwrkey { + status = "okay"; +}; diff --git a/dts/src/arm/imx6sx-udoo-neo-basic.dts b/dts/src/arm/imx6sx-udoo-neo-basic.dts index db0feb9b9f..205ea26484 100644 --- a/dts/src/arm/imx6sx-udoo-neo-basic.dts +++ b/dts/src/arm/imx6sx-udoo-neo-basic.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/dts/src/arm/imx6sx-udoo-neo-extended.dts b/dts/src/arm/imx6sx-udoo-neo-extended.dts index 5c7a2bb914..5817b49853 100644 --- a/dts/src/arm/imx6sx-udoo-neo-extended.dts +++ b/dts/src/arm/imx6sx-udoo-neo-extended.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -53,3 +16,11 @@ reg = <0x80000000 0x40000000>; }; }; + +&i2c4 { /* Onboard Motion sensors */ + status = "okay"; +}; + +&uart3 { /* Bluetooth */ + status = "okay"; +}; diff --git a/dts/src/arm/imx6sx-udoo-neo-full.dts b/dts/src/arm/imx6sx-udoo-neo-full.dts index 13dfe2afab..96f4d89848 100644 --- a/dts/src/arm/imx6sx-udoo-neo-full.dts +++ b/dts/src/arm/imx6sx-udoo-neo-full.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -68,3 +31,11 @@ }; }; }; + +&i2c4 { /* Onboard Motion sensors */ + status = "okay"; +}; + +&uart3 { /* Bluetooth */ + status = "okay"; +}; diff --git a/dts/src/arm/imx6sx-udoo-neo.dtsi b/dts/src/arm/imx6sx-udoo-neo.dtsi index 53b3eac94f..25d4aa985a 100644 --- a/dts/src/arm/imx6sx-udoo-neo.dtsi +++ b/dts/src/arm/imx6sx-udoo-neo.dtsi @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "imx6sx.dtsi" @@ -107,18 +70,6 @@ startup-delay-us = <70000>; enable-active-high; }; - - reg_bt: regulator-bt { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_bt_reg>; - enable-active-high; - gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>; - regulator-name = "bt_reg"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; }; &fec1 { @@ -225,6 +176,20 @@ }; }; +&i2c2 { /* Brick snap in sensors connector */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; + status = "okay"; +}; + +&i2c4 { /* Onboard Motion sensors */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + clock-frequency = <100000>; + status = "disabled"; +}; + &iomuxc { pinctrl_bt_reg: btreggrp { fsl,pins = @@ -256,6 +221,18 @@ <MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1>; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x4001b8b1>, + <MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x4001b8b1>; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = + <MX6SX_PAD_USB_H_DATA__I2C4_SDA 0x4001b8b1>, + <MX6SX_PAD_USB_H_STROBE__I2C4_SCL 0x4001b8b1>; + }; + pinctrl_uart1: uart1grp { fsl,pins = <MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>, @@ -354,11 +331,19 @@ status = "disabled"; }; -&uart3 { /* Bluetooth */ +&uart3 { /* Bluetooth - only on Extended/Full versions */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; uart-has-rtscts; - status = "okay"; + status = "disabled"; + + bluetooth { + compatible = "ti,wl1831-st"; + enable-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_reg>; + max-speed = <921600>; + }; }; /* Arduino serial */ diff --git a/dts/src/arm/imx6sx.dtsi b/dts/src/arm/imx6sx.dtsi index b16a123990..bb25add90f 100644 --- a/dts/src/arm/imx6sx.dtsi +++ b/dts/src/arm/imx6sx.dtsi @@ -600,7 +600,7 @@ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - regulator-1p1 { + reg_vdd1p1: regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <1000000>; @@ -615,7 +615,7 @@ anatop-enable-bit = <0>; }; - regulator-3p0 { + reg_vdd3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -630,7 +630,7 @@ anatop-enable-bit = <0>; }; - regulator-2p5 { + reg_vdd2p5: regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2250000>; @@ -738,6 +738,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; }; diff --git a/dts/src/arm/imx6ul-14x14-evk.dtsi b/dts/src/arm/imx6ul-14x14-evk.dtsi index 9207d5d071..cbe61b61a2 100644 --- a/dts/src/arm/imx6ul-14x14-evk.dtsi +++ b/dts/src/arm/imx6ul-14x14-evk.dtsi @@ -238,6 +238,10 @@ status = "okay"; }; +&snvs_pwrkey { + status = "okay"; +}; + &tsc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_tsc>; diff --git a/dts/src/arm/imx6ul-geam.dts b/dts/src/arm/imx6ul-geam.dts index bc77f26a2f..21ddd359d3 100644 --- a/dts/src/arm/imx6ul-geam.dts +++ b/dts/src/arm/imx6ul-geam.dts @@ -169,7 +169,7 @@ display = <&display0>; status = "okay"; - display0: display { + display0: display0 { bits-per-pixel = <16>; bus-width = <18>; diff --git a/dts/src/arm/imx6ul-isiot.dtsi b/dts/src/arm/imx6ul-isiot.dtsi index 213e802bf3..b26d4f57c6 100644 --- a/dts/src/arm/imx6ul-isiot.dtsi +++ b/dts/src/arm/imx6ul-isiot.dtsi @@ -161,7 +161,7 @@ display = <&display0>; status = "okay"; - display0: display { + display0: display0 { bits-per-pixel = <16>; bus-width = <18>; diff --git a/dts/src/arm/imx6ul.dtsi b/dts/src/arm/imx6ul.dtsi index a7f6d1d58e..81d4b49251 100644 --- a/dts/src/arm/imx6ul.dtsi +++ b/dts/src/arm/imx6ul.dtsi @@ -59,6 +59,7 @@ compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; + clock-frequency = <696000000>; clock-latency = <61036>; /* two CLK32 periods */ #cooling-cells = <2>; operating-points = < @@ -649,6 +650,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; snvs_lpgpr: snvs-lpgpr { @@ -856,6 +858,8 @@ <&clks IMX6UL_CLK_USDHC1>, <&clks IMX6UL_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; + fsl,tuning-step= <2>; + fsl,tuning-start-tap = <20>; bus-width = <4>; status = "disabled"; }; @@ -869,6 +873,8 @@ <&clks IMX6UL_CLK_USDHC2>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; + fsl,tuning-step= <2>; + fsl,tuning-start-tap = <20>; status = "disabled"; }; @@ -962,6 +968,14 @@ status = "disabled"; }; + pxp: pxp@21cc000 { + compatible = "fsl,imx6ul-pxp"; + reg = <0x021cc000 0x4000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_PXP>; + clock-names = "axi"; + }; + qspi: spi@21e0000 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/imx6ull-colibri-eval-v3.dtsi b/dts/src/arm/imx6ull-colibri-eval-v3.dtsi index 006690ea98..b6147c76d1 100644 --- a/dts/src/arm/imx6ull-colibri-eval-v3.dtsi +++ b/dts/src/arm/imx6ull-colibri-eval-v3.dtsi @@ -145,13 +145,20 @@ }; &usdhc1 { - pinctrl-names = "default"; + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_cd>; - no-1-8-v; + pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_snvs_usdhc1_cd>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_snvs_usdhc1_cd>; + pinctrl-3 = <&pinctrl_usdhc1 &pinctrl_snvs_usdhc1_sleep_cd>; cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; disable-wp; wakeup-source; keep-power-in-suspend; vmmc-supply = <®_3v3>; + vqmmc-supply = <®_sd1_vmmc>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; diff --git a/dts/src/arm/imx6ull-colibri.dtsi b/dts/src/arm/imx6ull-colibri.dtsi index 9ad1da1597..d56728f03c 100644 --- a/dts/src/arm/imx6ull-colibri.dtsi +++ b/dts/src/arm/imx6ull-colibri.dtsi @@ -545,6 +545,12 @@ >; }; + pinctrl_snvs_usdhc1_sleep_cd: snvs-usdhc1-cd-grp-slp { + fsl,pins = < + MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0 + >; + }; + pinctrl_snvs_wifi_pdn: snvs-wifi-pdn-grp { fsl,pins = < MX6ULL_PAD_BOOT_MODE1__GPIO5_IO11 0x14 diff --git a/dts/src/arm/imx6ull.dtsi b/dts/src/arm/imx6ull.dtsi index 22e4a307fa..b7e67d1213 100644 --- a/dts/src/arm/imx6ull.dtsi +++ b/dts/src/arm/imx6ull.dtsi @@ -12,6 +12,7 @@ /delete-node/ &crypto; &cpu0 { + clock-frequency = <900000000>; operating-points = < /* kHz uV */ 900000 1275000 @@ -34,6 +35,12 @@ compatible = "fsl,imx6ull-ocotp", "syscon"; }; +&pxp { + compatible = "fsl,imx6ull-pxp"; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; +}; + &usdhc1 { compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc"; }; diff --git a/dts/src/arm/imx7d-meerkat96.dts b/dts/src/arm/imx7d-meerkat96.dts new file mode 100644 index 0000000000..5339210b63 --- /dev/null +++ b/dts/src/arm/imx7d-meerkat96.dts @@ -0,0 +1,375 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Linaro Ltd. + */ + +/dts-v1/; + +#include "imx7d.dtsi" + +/ { + model = "96Boards Meerkat96 Board"; + compatible = "novtech,imx7d-meerkat96", "fsl,imx7d"; + + chosen { + stdout-path = &uart6; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512MB */ + }; + + reg_wlreg_on: regulator-wlreg-on { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlreg_on>; + regulator-name = "wlreg_on"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led1 { + label = "green:user1"; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led2 { + label = "green:user2"; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led3 { + label = "green:user3"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led4 { + label = "green:user4"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + + led5 { + label = "yellow:wlan"; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led6 { + label = "blue:bt"; + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + uart-has-rtscts; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart7 &pinctrl_bt_gpios>; + assigned-clocks = <&clks IMX7D_UART7_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + uart-has-rtscts; + fsl,dte-mode; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + device-wakeup-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio4 17 GPIO_ACTIVE_HIGH>; + }; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + keep-power-in-suspend; + tuning-step = <2>; + vmmc-supply = <®_3p3v>; + no-1-8-v; + broken-cd; + status = "okay"; +}; + +&usdhc3 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + no-1-8-v; + no-mmc; + non-removable; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_wlreg_on>; + vqmmc-supply =<®_3p3v>; + status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_irq>; + interrupt-parent = <&gpio6>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&iomuxc { + pinctrl_bt_gpios: btgpiosgrp { + fsl,pins = < + MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x59 + MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x1f + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x59 + MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x59 + MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x59 + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x59 + MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x59 + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA 0x4000007f + MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL 0x4000007f + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f + MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f + >; + }; + + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + MX7D_PAD_LCD_RESET__LCD_RESET 0x79 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX7D_PAD_SD3_DATA4__UART3_DCE_RX 0x79 + MX7D_PAD_SD3_DATA5__UART3_DCE_TX 0x79 + MX7D_PAD_SD3_DATA6__UART3_DCE_RTS 0x79 + MX7D_PAD_SD3_DATA7__UART3_DCE_CTS 0x79 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_SD1_CD_B__UART6_DCE_RX 0x79 + MX7D_PAD_SD1_WP__UART6_DCE_TX 0x79 + >; + }; + + pinctrl_uart7: uart7grp { + fsl,pins = < + MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX 0x79 + MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX 0x79 + MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS 0x79 + MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS 0x79 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x0D + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + >; + }; + + pinctrl_wlan_irq: wlanirqgrp { + fsl,pins = < + MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x19 + >; + }; + + pinctrl_wlreg_on: wlregongrp { + fsl,pins = < + MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x19 + >; + }; +}; diff --git a/dts/src/arm/imx7d-sdb.dts b/dts/src/arm/imx7d-sdb.dts index 202922ed37..869efbc4af 100644 --- a/dts/src/arm/imx7d-sdb.dts +++ b/dts/src/arm/imx7d-sdb.dts @@ -263,8 +263,8 @@ }; sw2_reg: sw2 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1850000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; @@ -379,6 +379,18 @@ status = "okay"; }; +®_1p0d { + vin-supply = <&sw2_reg>; +}; + +®_1p2 { + vin-supply = <&sw2_reg>; +}; + +&snvs_pwrkey { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/dts/src/arm/imx7d-zii-rpu2.dts b/dts/src/arm/imx7d-zii-rpu2.dts index 3e467a94e8..4a78ddc751 100644 --- a/dts/src/arm/imx7d-zii-rpu2.dts +++ b/dts/src/arm/imx7d-zii-rpu2.dts @@ -16,7 +16,7 @@ compatible = "zii,imx7d-rpu2", "fsl,imx7d"; chosen { - stdout-path = &uart1; + stdout-path = &uart2; }; cs2000_ref: oscillator { @@ -775,13 +775,6 @@ >; }; - pinctrl_i2c1_gpio: i2c1gpiogrp { - fsl,pins = < - MX7D_PAD_I2C1_SDA__GPIO4_IO9 0x4000007f - MX7D_PAD_I2C1_SCL__GPIO4_IO8 0x4000007f - >; - }; - pinctrl_i2c2: i2c2grp { fsl,pins = < MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f @@ -789,13 +782,6 @@ >; }; - pinctrl_i2c2_gpio: i2c2gpiogrp { - fsl,pins = < - MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x4000007f - MX7D_PAD_I2C2_SCL__GPIO4_IO10 0x4000007f - >; - }; - pinctrl_i2c3: i2c3grp { fsl,pins = < MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f diff --git a/dts/src/arm/imx7d.dtsi b/dts/src/arm/imx7d.dtsi index f33b560821..42528d2812 100644 --- a/dts/src/arm/imx7d.dtsi +++ b/dts/src/arm/imx7d.dtsi @@ -12,6 +12,8 @@ clock-frequency = <996000000>; operating-points-v2 = <&cpu0_opp_table>; #cooling-cells = <2>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; cpu1: cpu@1 { @@ -39,15 +41,23 @@ opp-792000000 { opp-hz = /bits/ 64 <792000000>; - opp-microvolt = <975000>; + opp-microvolt = <1000000>; clock-latency-ns = <150000>; + opp-supported-hw = <0xf>, <0xf>; }; opp-996000000 { opp-hz = /bits/ 64 <996000000>; - opp-microvolt = <1075000>; + opp-microvolt = <1100000>; clock-latency-ns = <150000>; - opp-suspend; + opp-supported-hw = <0xc>, <0xf>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1225000>; + clock-latency-ns = <150000>; + opp-supported-hw = <0x8>, <0xf>; }; }; diff --git a/dts/src/arm/imx7s.dtsi b/dts/src/arm/imx7s.dtsi index 106711d2c0..c1a4fff5ce 100644 --- a/dts/src/arm/imx7s.dtsi +++ b/dts/src/arm/imx7s.dtsi @@ -117,7 +117,7 @@ * non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell" */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -175,7 +175,7 @@ ranges; funnel@30041000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x30041000 0x1000>; clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; @@ -217,7 +217,7 @@ }; funnel@30083000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x30083000 0x1000>; clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; clock-names = "apb_pclk"; @@ -551,6 +551,10 @@ tempmon_temp_grade: temp-grade@10 { reg = <0x10 0x4>; }; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 0x4>; + }; }; anatop: anatop@30360000 { @@ -609,6 +613,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; }; diff --git a/dts/src/arm/imx7ulp-evk.dts b/dts/src/arm/imx7ulp-evk.dts index a09026a6d2..4245b33bb4 100644 --- a/dts/src/arm/imx7ulp-evk.dts +++ b/dts/src/arm/imx7ulp-evk.dts @@ -22,6 +22,25 @@ reg = <0x60000000 0x40000000>; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&tpm4 1 50000 0>; + brightness-levels = <0 20 25 30 35 40 100>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_vbus>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio_ptc 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_vsd_3v3: regulator-vsd-3v3 { compatible = "regulator-fixed"; regulator-name = "VSD_3V3"; @@ -40,6 +59,23 @@ status = "okay"; }; +&tpm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1_id>; + srp-disable; + hnp-disable; + adp-disable; + over-current-active-low; + status = "okay"; +}; + &usdhc0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc0>; @@ -57,6 +93,25 @@ bias-pull-up; }; + pinctrl_pwm0: pwm0grp { + fsl,pins = < + IMX7ULP_PAD_PTF2__TPM4_CH1 0x2 + >; + }; + + pinctrl_usbotg1_vbus: otg1vbusgrp { + fsl,pins = < + IMX7ULP_PAD_PTC0__PTC0 0x20000 + >; + }; + + pinctrl_usbotg1_id: otg1idgrp { + fsl,pins = < + IMX7ULP_PAD_PTC13__USB0_ID 0x10003 + IMX7ULP_PAD_PTC16__USB1_OC2 0x10003 + >; + }; + pinctrl_usdhc0: usdhc0grp { fsl,pins = < IMX7ULP_PAD_PTD1__SDHC0_CMD 0x43 diff --git a/dts/src/arm/imx7ulp.dtsi b/dts/src/arm/imx7ulp.dtsi index d6b711011c..992747a574 100644 --- a/dts/src/arm/imx7ulp.dtsi +++ b/dts/src/arm/imx7ulp.dtsi @@ -30,6 +30,7 @@ serial1 = &lpuart5; serial2 = &lpuart6; serial3 = &lpuart7; + usbphy0 = &usbphy1; }; cpus { @@ -100,6 +101,29 @@ reg = <0x40000000 0x800000>; ranges; + crypto: crypto@40240000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x40240000 0x10000>; + ranges = <0 0x40240000 0x10000>; + clocks = <&pcc2 IMX7ULP_CLK_CAAM>, + <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>; + clock-names = "aclk", "ipg"; + + sec_jr0: jr0@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr1@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + lpuart4: serial@402d0000 { compatible = "fsl,imx7ulp-lpuart"; reg = <0x402d0000 0x1000>; @@ -124,6 +148,16 @@ status = "disabled"; }; + tpm4: pwm@40250000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x40250000 0x1000>; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; + #pwm-cells = <3>; + status = "disabled"; + }; + tpm5: tpm@40260000 { compatible = "fsl,imx7ulp-tpm"; reg = <0x40260000 0x1000>; @@ -133,6 +167,33 @@ clock-names = "ipg", "per"; }; + usbotg1: usb@40330000 { + compatible = "fsl,imx7ulp-usb", "fsl,imx6ul-usb"; + reg = <0x40330000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_USB0>; + phys = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x8>; + rx-burst-size-dword = <0x8>; + status = "disabled"; + }; + + usbmisc1: usbmisc@40330200 { + compatible = "fsl,imx7ulp-usbmisc", "fsl,imx7d-usbmisc"; + #index-cells = <1>; + reg = <0x40330200 0x200>; + }; + + usbphy1: usb-phy@0x40350000 { + compatible = "fsl,imx7ulp-usbphy", "fsl,imx6ul-usbphy"; + reg = <0x40350000 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pcc2 IMX7ULP_CLK_USB_PHY>; + #phy-cells = <0>; + }; + usdhc0: mmc@40370000 { compatible = "fsl,imx7ulp-usdhc", "fsl,imx6sx-usdhc"; reg = <0x40370000 0x10000>; diff --git a/dts/src/arm/integrator.dtsi b/dts/src/arm/integrator.dtsi index 1612a869a4..602f74d2c7 100644 --- a/dts/src/arm/integrator.dtsi +++ b/dts/src/arm/integrator.dtsi @@ -62,6 +62,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x24000000 0x02000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; fpga { diff --git a/dts/src/arm/iwg20d-q7-common.dtsi b/dts/src/arm/iwg20d-q7-common.dtsi index e2b1ab9b56..ae75a1db3d 100644 --- a/dts/src/arm/iwg20d-q7-common.dtsi +++ b/dts/src/arm/iwg20d-q7-common.dtsi @@ -87,7 +87,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; + gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; gpios-states = <1>; states = <3300000 1 1800000 0>; diff --git a/dts/src/arm/logicpd-torpedo-37xx-devkit-28.dts b/dts/src/arm/logicpd-torpedo-37xx-devkit-28.dts new file mode 100644 index 0000000000..07ac99b9cd --- /dev/null +++ b/dts/src/arm/logicpd-torpedo-37xx-devkit-28.dts @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 + +/dts-v1/; + +/* + * There are two types of 4.3" LCD, Type 15 and Type 28. + * By default, type 15 was used. This device tree file + * uses the timing for the type 28 LCD + */ + +#include "logicpd-torpedo-37xx-devkit.dts" + +&lcd0 { + + label = "28"; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <3>; + hback-porch = <2>; + hsync-len = <42>; + vback-porch = <3>; + vfront-porch = <2>; + vsync-len = <11>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <0>; + }; +}; diff --git a/dts/src/arm/ls1021a-tsn.dts b/dts/src/arm/ls1021a-tsn.dts new file mode 100644 index 0000000000..5b7689094b --- /dev/null +++ b/dts/src/arm/ls1021a-tsn.dts @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright 2016-2018 NXP Semiconductors + * Copyright 2019 Vladimir Oltean <olteanv@gmail.com> + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "NXP LS1021A-TSN Board"; + + sys_mclk: clock-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + reg_vdda_codec: regulator-3V3 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vddio_codec: regulator-2V5 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; + + /* ADG704BRMZ 1:4 SPI mux/demux */ + sja1105: ethernet-switch@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,sja1105t"; + /* 12 MHz */ + spi-max-frequency = <12000000>; + /* Sample data on trailing clock edge */ + spi-cpha; + /* SPI controller settings for SJA1105 timing requirements */ + fsl,spi-cs-sck-delay = <1000>; + fsl,spi-sck-cs-delay = <1000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + /* ETH5 written on chassis */ + label = "swp5"; + phy-handle = <&rgmii_phy6>; + phy-mode = "rgmii-id"; + reg = <0>; + }; + + port@1 { + /* ETH2 written on chassis */ + label = "swp2"; + phy-handle = <&rgmii_phy3>; + phy-mode = "rgmii-id"; + reg = <1>; + }; + + port@2 { + /* ETH3 written on chassis */ + label = "swp3"; + phy-handle = <&rgmii_phy4>; + phy-mode = "rgmii-id"; + reg = <2>; + }; + + port@3 { + /* ETH4 written on chassis */ + label = "swp4"; + phy-handle = <&rgmii_phy5>; + phy-mode = "rgmii-id"; + reg = <3>; + }; + + port@4 { + /* Internal port connected to eth2 */ + ethernet = <&enet2>; + phy-mode = "rgmii"; + reg = <4>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&enet0 { + tbi-handle = <&tbi0>; + phy-handle = <&sgmii_phy2>; + phy-mode = "sgmii"; + status = "okay"; +}; + +&enet1 { + tbi-handle = <&tbi1>; + phy-handle = <&sgmii_phy1>; + phy-mode = "sgmii"; + status = "okay"; +}; + +/* RGMII delays added via PCB traces */ +&enet2 { + phy-mode = "rgmii"; + status = "okay"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&esdhc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + /* 3 axis accelerometer */ + accelerometer@1e { + compatible = "fsl,fxls8471"; + position = <0>; + reg = <0x1e>; + }; + + /* Audio codec (SAI2) */ + audio-codec@2a { + compatible = "fsl,sgtl5000"; + VDDIO-supply = <®_vddio_codec>; + VDDA-supply = <®_vdda_codec>; + #sound-dai-cells = <0>; + clocks = <&sys_mclk>; + reg = <0x2a>; + }; + + /* Current sensing circuit for 1V VDDCORE PMIC rail */ + current-sensor@44 { + compatible = "ti,ina220"; + shunt-resistor = <1000>; + reg = <0x44>; + }; + + /* Current sensing circuit for 12V VCC rail */ + current-sensor@45 { + compatible = "ti,ina220"; + shunt-resistor = <1000>; + reg = <0x45>; + }; + + /* Thermal monitor - case */ + temperature-sensor@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + /* Thermal monitor - chip */ + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + }; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + }; + + /* Unsupported devices: + * - FXAS21002C Gyroscope at 0x20 + * - TI ADS7924 4-channel ADC at 0x49 + */ +}; + +&ifc { + status = "disabled"; +}; + +&lpuart0 { + status = "okay"; +}; + +&lpuart3 { + status = "okay"; +}; + +&mdio0 { + /* AR8031 */ + sgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + /* AR8031 */ + sgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + /* BCM5464 quad PHY */ + rgmii_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + + rgmii_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + + rgmii_phy5: ethernet-phy@5 { + reg = <0x5>; + }; + + rgmii_phy6: ethernet-phy@6 { + reg = <0x6>; + }; + + /* SGMII PCS for enet0 */ + tbi0: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&mdio1 { + /* SGMII PCS for enet1 */ + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&qspi { + status = "okay"; + + flash@0 { + /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */ + compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s"; + spi-max-frequency = <20000000>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "RCW"; + reg = <0x0 0x40000>; + }; + + partition@40000 { + label = "U-Boot"; + reg = <0x40000 0x300000>; + }; + + partition@340000 { + label = "U-Boot Env"; + reg = <0x340000 0x100000>; + }; + }; + }; +}; + +&sai2 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm/meson.dtsi b/dts/src/arm/meson.dtsi index 8841783ace..c4447f6c8b 100644 --- a/dts/src/arm/meson.dtsi +++ b/dts/src/arm/meson.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2014 Carlo Caione <carlo@caione.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/dts/src/arm/meson6-atv1200.dts b/dts/src/arm/meson6-atv1200.dts index 997e69c596..98e1c94c02 100644 --- a/dts/src/arm/meson6-atv1200.dts +++ b/dts/src/arm/meson6-atv1200.dts @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2014 Carlo Caione <carlo@caione.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/dts/src/arm/meson6.dtsi b/dts/src/arm/meson6.dtsi index 6558525591..2d31b7ce3f 100644 --- a/dts/src/arm/meson6.dtsi +++ b/dts/src/arm/meson6.dtsi @@ -1,48 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2014 Carlo Caione <carlo@caione.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include "meson.dtsi" diff --git a/dts/src/arm/meson8-minix-neo-x8.dts b/dts/src/arm/meson8-minix-neo-x8.dts index 8686abd5de..61ec929ab8 100644 --- a/dts/src/arm/meson8-minix-neo-x8.dts +++ b/dts/src/arm/meson8-minix-neo-x8.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2014 Beniamino Galvani <b.galvani@gmail.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/dts/src/arm/meson8.dtsi b/dts/src/arm/meson8.dtsi index 40c11b6b21..5a7e3e5cae 100644 --- a/dts/src/arm/meson8.dtsi +++ b/dts/src/arm/meson8.dtsi @@ -1,46 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2014 Carlo Caione <carlo@caione.org> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/meson8b-clkc.h> @@ -228,6 +188,28 @@ }; }; + mmcbus: bus@c8000000 { + compatible = "simple-bus"; + reg = <0xc8000000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc8000000 0x8000>; + + dmcbus: bus@6000 { + compatible = "simple-bus"; + reg = <0x6000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x400>; + + canvas: video-lut@20 { + compatible = "amlogic,meson8-canvas", + "amlogic,canvas"; + reg = <0x20 0x14>; + }; + }; + }; + apb: bus@d0000000 { compatible = "simple-bus"; reg = <0xd0000000 0x200000>; diff --git a/dts/src/arm/meson8b-ec100.dts b/dts/src/arm/meson8b-ec100.dts index 9bf4249cb6..96d239d833 100644 --- a/dts/src/arm/meson8b-ec100.dts +++ b/dts/src/arm/meson8b-ec100.dts @@ -234,10 +234,6 @@ phy-handle = <ð_phy0>; phy-mode = "rmii"; - snps,reset-gpio = <&gpio GPIOH_4 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -246,6 +242,11 @@ eth_phy0: ethernet-phy@0 { /* IC Plus IP101A/G (0x02430c54) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; + icplus,select-interrupt; interrupt-parent = <&gpio_intc>; /* GPIOH_3 */ diff --git a/dts/src/arm/meson8b-mxq.dts b/dts/src/arm/meson8b-mxq.dts index 08ddd7fb0b..bb27b34eb3 100644 --- a/dts/src/arm/meson8b-mxq.dts +++ b/dts/src/arm/meson8b-mxq.dts @@ -1,50 +1,13 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2015 Endless Mobile, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + #include "meson8b.dtsi" / { @@ -63,6 +26,127 @@ device_type = "memory"; reg = <0x40000000 0x40000000>; }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&saradc 8>; + }; + + vcck: regulator-vcck { + compatible = "pwm-regulator"; + + regulator-name = "VCCK"; + regulator-min-microvolt = <860000>; + regulator-max-microvolt = <1140000>; + + pwms = <&pwm_cd 0 1148 0>; + pwm-dutycycle-range = <100 0>; + + regulator-boot-on; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&vcc_3v3>; + }; + + vcc_3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vcc_5v>; + }; + + vcc_5v: regulator-vcc5v { + compatible = "regulator-fixed"; + + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + regulator-boot-on; + regulator-always-on; + }; +}; + +&cpu0 { + cpu-supply = <&vcck>; +}; + +ðmac { + status = "okay"; + + pinctrl-0 = <ð_rmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* IC Plus IP101A/G (0x02430c54) */ + reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; + + icplus,select-interrupt; + interrupt-parent = <&gpio_intc>; + /* GPIOH_3 */ + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&saradc { + status = "okay"; + vref-supply = <&vcc_1v8>; +}; + +&sdio { + status = "okay"; + + pinctrl-0 = <&sd_b_pins>; + pinctrl-names = "default"; + + /* SD card */ + sd_card_slot: slot@1 { + compatible = "mmc-slot"; + reg = <1>; + status = "okay"; + + bus-width = <4>; + no-sdio; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vcc_3v3>; + }; +}; + +&pwm_cd { + status = "okay"; + pinctrl-0 = <&pwm_c1_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_XTAL>; + clock-names = "clkin0"; }; &uart_AO { @@ -70,3 +154,19 @@ pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; }; + +&usb0 { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; diff --git a/dts/src/arm/meson8b-odroidc1.dts b/dts/src/arm/meson8b-odroidc1.dts index f3ad9397f6..86c4614e0a 100644 --- a/dts/src/arm/meson8b-odroidc1.dts +++ b/dts/src/arm/meson8b-odroidc1.dts @@ -1,47 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2015 Endless Mobile, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -216,10 +176,6 @@ ðmac { status = "okay"; - snps,reset-gpio = <&gpio GPIOH_4 GPIO_ACTIVE_HIGH>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 30000>; - pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; @@ -235,6 +191,11 @@ /* Realtek RTL8211F (0x001cc916) */ eth_phy: ethernet-phy@0 { reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* GPIOH_3 */ interrupts = <17 IRQ_TYPE_LEVEL_LOW>; diff --git a/dts/src/arm/meson8b.dtsi b/dts/src/arm/meson8b.dtsi index ec67f49116..fba2c70c2f 100644 --- a/dts/src/arm/meson8b.dtsi +++ b/dts/src/arm/meson8b.dtsi @@ -1,47 +1,7 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT /* * Copyright 2015 Endless Mobile, Inc. * Author: Carlo Caione <carlo@endlessm.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/meson8b-clkc.h> @@ -205,6 +165,28 @@ }; }; + mmcbus: bus@c8000000 { + compatible = "simple-bus"; + reg = <0xc8000000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xc8000000 0x8000>; + + dmcbus: bus@6000 { + compatible = "simple-bus"; + reg = <0x6000 0x400>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x6000 0x400>; + + canvas: video-lut@48 { + compatible = "amlogic,meson8b-canvas", + "amlogic,canvas"; + reg = <0x48 0x14>; + }; + }; + }; + apb: bus@d0000000 { compatible = "simple-bus"; reg = <0xd0000000 0x200000>; diff --git a/dts/src/arm/meson8m2-mxiii-plus.dts b/dts/src/arm/meson8m2-mxiii-plus.dts index 29d830ae4b..d54477b100 100644 --- a/dts/src/arm/meson8m2-mxiii-plus.dts +++ b/dts/src/arm/meson8m2-mxiii-plus.dts @@ -73,10 +73,6 @@ amlogic,tx-delay-ns = <4>; - snps,reset-gpio = <&gpio GPIOH_4 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -85,6 +81,10 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>; }; }; }; @@ -114,8 +114,9 @@ regulator-always-on; }; - DCDC2 { - regulator-name = "VDDAO"; + vddee: DCDC2 { + /* the output is also used as VDDAO */ + regulator-name = "VDD_EE"; regulator-min-microvolt = <950000>; regulator-max-microvolt = <1150000>; regulator-boot-on; @@ -189,6 +190,10 @@ }; }; +&mali { + mali-supply = <&vddee>; +}; + &saradc { status = "okay"; vref-supply = <&vddio_ao1v8>; diff --git a/dts/src/arm/meson8m2.dtsi b/dts/src/arm/meson8m2.dtsi index bb87b251e1..5bde7f5020 100644 --- a/dts/src/arm/meson8m2.dtsi +++ b/dts/src/arm/meson8m2.dtsi @@ -14,6 +14,16 @@ compatible = "amlogic,meson8m2-clkc", "amlogic,meson8-clkc"; }; +&dmcbus { + /* the offset of the canvas registers has changed compared to Meson8 */ + /delete-node/ video-lut@20; + + canvas: video-lut@48 { + compatible = "amlogic,meson8m2-canvas", "amlogic,canvas"; + reg = <0x48 0x14>; + }; +}; + ðmac { compatible = "amlogic,meson8m2-dwmac", "snps,dwmac"; reg = <0xc9410000 0x10000 diff --git a/dts/src/arm/omap4-l4.dtsi b/dts/src/arm/omap4-l4.dtsi index 5059ecac44..bea05dc4ef 100644 --- a/dts/src/arm/omap4-l4.dtsi +++ b/dts/src/arm/omap4-l4.dtsi @@ -1371,7 +1371,6 @@ target-module@20000 { /* 0x48020000, ap 3 06.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart3"; reg = <0x20050 0x4>, <0x20054 0x4>, <0x20058 0x4>; @@ -1728,7 +1727,6 @@ target-module@6a000 { /* 0x4806a000, ap 26 18.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart1"; reg = <0x6a050 0x4>, <0x6a054 0x4>, <0x6a058 0x4>; @@ -1758,7 +1756,6 @@ target-module@6c000 { /* 0x4806c000, ap 28 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart2"; reg = <0x6c050 0x4>, <0x6c054 0x4>, <0x6c058 0x4>; @@ -1788,7 +1785,6 @@ target-module@6e000 { /* 0x4806e000, ap 30 1c.1 */ compatible = "ti,sysc-omap2", "ti,sysc"; - ti,hwmods = "uart4"; reg = <0x6e050 0x4>, <0x6e054 0x4>, <0x6e058 0x4>; @@ -2107,7 +2103,6 @@ target-module@9c000 { /* 0x4809c000, ap 53 36.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc1"; reg = <0x9c000 0x4>, <0x9c010 0x4>; reg-names = "rev", "sysc"; @@ -2175,7 +2170,6 @@ target-module@ad000 { /* 0x480ad000, ap 63 50.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc3"; reg = <0xad000 0x4>, <0xad010 0x4>; reg-names = "rev", "sysc"; @@ -2241,7 +2235,6 @@ target-module@b4000 { /* 0x480b4000, ap 67 46.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc2"; reg = <0xb4000 0x4>, <0xb4010 0x4>; reg-names = "rev", "sysc"; @@ -2336,7 +2329,6 @@ target-module@d1000 { /* 0x480d1000, ap 73 44.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc4"; reg = <0xd1000 0x4>, <0xd1010 0x4>; reg-names = "rev", "sysc"; @@ -2369,7 +2361,6 @@ target-module@d5000 { /* 0x480d5000, ap 75 4e.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; - ti,hwmods = "mmc5"; reg = <0xd5000 0x4>, <0xd5010 0x4>; reg-names = "rev", "sysc"; diff --git a/dts/src/arm/pxa300-raumfeld-common.dtsi b/dts/src/arm/pxa300-raumfeld-common.dtsi index 8ac24e3c85..8a6721d436 100644 --- a/dts/src/arm/pxa300-raumfeld-common.dtsi +++ b/dts/src/arm/pxa300-raumfeld-common.dtsi @@ -319,9 +319,9 @@ gpio_keys_pins: gpio-keys-pins { pinctrl-single,pins = < - MFP_PIN_PXA300(14) MFP_AF0 /* SCK */ - MFP_PIN_PXA300(115) MFP_AF0 /* MOSI */ - MFP_PIN_PXA300(119) MFP_AF0 /* MISO */ + MFP_PIN_PXA300(14) MFP_AF0 /* on-off */ + MFP_PIN_PXA300(115) MFP_AF0 /* rescue boot */ + MFP_PIN_PXA300(119) MFP_AF0 /* setup */ >; pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); }; diff --git a/dts/src/arm/pxa300-raumfeld-controller.dts b/dts/src/arm/pxa300-raumfeld-controller.dts index 65d825091f..12b15945ac 100644 --- a/dts/src/arm/pxa300-raumfeld-controller.dts +++ b/dts/src/arm/pxa300-raumfeld-controller.dts @@ -41,6 +41,8 @@ }; charger: charger { + pinctrl-names = "default"; + pinctrl-0 = <&charger_pins>; compatible = "gpio-charger"; charger-type = "mains"; gpios = <&gpio 101 GPIO_ACTIVE_LOW>; @@ -109,9 +111,10 @@ }; &keys { + pinctrl-0 = <&gpio_keys_pins &dock_detect_pins>; dock-detect { label = "dock detect"; - gpios = <&gpio 116 GPIO_ACTIVE_HIGH>; + gpios = <&gpio 116 GPIO_ACTIVE_LOW>; linux,code = <KEY_F5>; }; }; @@ -236,6 +239,22 @@ pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); }; + charger_pins: charger_pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(31) MFP_AF0 /* PEN2 */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH); + pinctrl-single,bias-pullup = MPF_PULL_UP; + }; + + dock_detect_pins: dock_detect_pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(116) MFP_AF0 /* DOCK_DETECT */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH); + pinctrl-single,bias-pullup = MPF_PULL_UP; + }; + lcdc_pins: lcdc-pins { pinctrl-single,pins = < MFP_PIN_PXA300(54) MFP_AF1 /* LDD_0 */ diff --git a/dts/src/arm/pxa300-raumfeld-speaker-one.dts b/dts/src/arm/pxa300-raumfeld-speaker-one.dts index 5f9e37585a..a70560a8ea 100644 --- a/dts/src/arm/pxa300-raumfeld-speaker-one.dts +++ b/dts/src/arm/pxa300-raumfeld-speaker-one.dts @@ -116,6 +116,9 @@ st,invalid-input-detect-mute; /* 2 (half-bridge) and 1 (full-bridge) on-board power */ st,output-conf = /bits/ 8 <0x1>; + st,ch1-output-mapping = /bits/ 8 <0>; + st,ch2-output-mapping = /bits/ 8 <1>; + st,ch3-output-mapping = /bits/ 8 <2>; st,needs_esd_watchdog; }; }; diff --git a/dts/src/arm/pxa3xx.dtsi b/dts/src/arm/pxa3xx.dtsi index e1e607f53c..c237a0e4b1 100644 --- a/dts/src/arm/pxa3xx.dtsi +++ b/dts/src/arm/pxa3xx.dtsi @@ -71,6 +71,14 @@ #define MFP_DS13X < (0x7 << 10) MFP_DSMSK > /* + * MFP bias pull mode for pins. + * Example of use: pinctrl-single,bias-pullup = MPF_PULL_UP; + */ +#define MPF_PULL_MSK (0x7 << 13) +#define MPF_PULL_DOWN < (0x5 << 13) (0x5 << 13) 0 MPF_PULL_MSK > +#define MPF_PULL_UP < (0x6 << 13) (0x6 << 13) 0 MPF_PULL_MSK > + +/* * MFP low power mode for pins. * Example of use: * pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW|MFP_LPM_EDGE_FALL); diff --git a/dts/src/arm/qcom-apq8064.dtsi b/dts/src/arm/qcom-apq8064.dtsi index 65975df6a8..8b79b4112e 100644 --- a/dts/src/arm/qcom-apq8064.dtsi +++ b/dts/src/arm/qcom-apq8064.dtsi @@ -1603,7 +1603,7 @@ }; replicator { - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; clocks = <&rpmcc RPM_QDSS_CLK>; clock-names = "apb_pclk"; @@ -1636,7 +1636,7 @@ }; funnel@1a04000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x1a04000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>; diff --git a/dts/src/arm/qcom-msm8974-fairphone-fp2.dts b/dts/src/arm/qcom-msm8974-fairphone-fp2.dts index 643c57f848..bf402ae392 100644 --- a/dts/src/arm/qcom-msm8974-fairphone-fp2.dts +++ b/dts/src/arm/qcom-msm8974-fairphone-fp2.dts @@ -50,6 +50,12 @@ }; }; + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + vcc-supply = <&pm8941_l18>; + }; + smd { rpm { rpm_requests { diff --git a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts index b3b04736a1..3487daf98e 100644 --- a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -280,6 +280,16 @@ }; }; + i2c2_pins: i2c2 { + mux { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + + drive-strength = <2>; + bias-disable; + }; + }; + i2c3_pins: i2c3 { mux { pins = "gpio10", "gpio11"; @@ -289,6 +299,16 @@ }; }; + i2c11_pins: i2c11 { + mux { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + + drive-strength = <2>; + bias-disable; + }; + }; + i2c12_pins: i2c12 { mux { pins = "gpio87", "gpio88"; @@ -306,6 +326,35 @@ input-enable; }; }; + + touch_pin: touch { + int { + pins = "gpio5"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + input-enable; + }; + + reset { + pins = "gpio8"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + panel_pin: panel { + te { + pins = "gpio12"; + function = "mdp_vsync"; + + drive-strength = <2>; + bias-disable; + }; + }; }; sdhci@f9824900 { @@ -369,6 +418,30 @@ }; }; + i2c@f9967000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c11_pins>; + clock-frequency = <355000>; + qcom,src-freq = <50000000>; + + led-controller@38 { + compatible = "ti,lm3630a"; + status = "ok"; + reg = <0x38>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-sources = <0 1>; + label = "lcd-backlight"; + default-brightness = <200>; + }; + }; + }; + i2c@f9968000 { status = "ok"; pinctrl-names = "default"; @@ -424,6 +497,41 @@ }; }; + i2c@f9924000 { + status = "ok"; + + clock-frequency = <355000>; + qcom,src-freq = <50000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + synaptics@70 { + compatible = "syna,rmi4-i2c"; + reg = <0x70>; + + interrupts-extended = <&msmgpio 5 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_pin>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; + }; + i2c@f9925000 { status = "ok"; pinctrl-names = "default"; @@ -466,6 +574,54 @@ }; }; }; + + mdss@fd900000 { + status = "ok"; + + mdp@fd900000 { + status = "ok"; + }; + + dsi@fd922800 { + status = "ok"; + + vdda-supply = <&pm8941_l2>; + vdd-supply = <&pm8941_lvs3>; + vddio-supply = <&pm8941_l12>; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + + panel: panel@0 { + reg = <0>; + compatible = "lg,acx467akm-7"; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + + dsi-phy@fd922a00 { + status = "ok"; + + vddio-supply = <&pm8941_l12>; + }; + }; }; &spmi_bus { diff --git a/dts/src/arm/qcom-msm8974.dtsi b/dts/src/arm/qcom-msm8974.dtsi index 45b5c8ef03..369e58f641 100644 --- a/dts/src/arm/qcom-msm8974.dtsi +++ b/dts/src/arm/qcom-msm8974.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> +#include <dt-bindings/clock/qcom,mmcc-msm8974.h> #include <dt-bindings/clock/qcom,rpmcc.h> #include <dt-bindings/reset/qcom,gcc-msm8974.h> #include <dt-bindings/gpio/gpio.h> @@ -897,7 +898,7 @@ }; funnel@fc31b000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0xfc31b000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; @@ -931,7 +932,7 @@ }; funnel@fc31a000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0xfc31a000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; @@ -969,7 +970,7 @@ }; funnel@fc345000 { /* KPSS funnel only 4 inputs are used */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0xfc345000 0x1000>; clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; @@ -1085,6 +1086,137 @@ }; }; }; + + mdss: mdss@fd900000 { + status = "disabled"; + + compatible = "qcom,mdss"; + reg = <0xfd900000 0x100>, + <0xfd924000 0x1000>; + reg-names = "mdss_phys", + "vbif_phys"; + + power-domains = <&mmcc MDSS_GDSC>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdp: mdp@fd900000 { + status = "disabled"; + + compatible = "qcom,mdp5"; + reg = <0xfd900100 0x22000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0 0>; + + clocks = <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi0: dsi@fd922800 { + status = "disabled"; + + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0xfd922800 0x1f8>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + + assigned-clocks = <&mmcc BYTE0_CLK_SRC>, + <&mmcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy0 0>, + <&dsi_phy0 1>; + + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core", + "core_mmss"; + + phys = <&dsi_phy0>; + phy-names = "dsi-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi_phy0: dsi-phy@fd922a00 { + status = "disabled"; + + compatible = "qcom,dsi-phy-28nm-hpm"; + reg = <0xfd922a00 0xd4>, + <0xfd922b00 0x280>, + <0xfd922d80 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + #clock-cells = <1>; + #phy-cells = <0>; + qcom,dsi-phy-index = <0>; + + clocks = <&mmcc MDSS_AHB_CLK>; + clock-names = "iface"; + }; + }; }; smd { diff --git a/dts/src/arm/r7s72100-genmai.dts b/dts/src/arm/r7s72100-genmai.dts index 474baa0c7c..07d611d2b7 100644 --- a/dts/src/arm/r7s72100-genmai.dts +++ b/dts/src/arm/r7s72100-genmai.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r7s72100-rskrza1.dts b/dts/src/arm/r7s72100-rskrza1.dts index ff24301dc1..99acfe4fe1 100644 --- a/dts/src/arm/r7s72100-rskrza1.dts +++ b/dts/src/arm/r7s72100-rskrza1.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r7s72100.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/r7s72100-pinctrl.h> / { @@ -28,6 +29,37 @@ reg = <0x08000000 0x02000000>; }; + keyboard { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&keyboard_pins>; + + key-1 { + interrupt-parent = <&irqc>; + interrupts = <3 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_1>; + label = "SW1"; + wakeup-source; + }; + + key-2 { + interrupt-parent = <&irqc>; + interrupts = <2 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_2>; + label = "SW2"; + wakeup-source; + }; + + key-3 { + interrupt-parent = <&irqc>; + interrupts = <5 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_3>; + label = "SW3"; + wakeup-source; + }; + }; + lbsc { #address-cells = <1>; #size-cells = <1>; @@ -101,6 +133,12 @@ <RZA1_PINMUX(1, 7, 1)>; /* RIIC3SDA */ }; + keyboard_pins: keyboard { + pinmux = <RZA1_PINMUX(1, 9, 3)>, /* IRQ3 */ + <RZA1_PINMUX(1, 8, 3)>, /* IRQ2 */ + <RZA1_PINMUX(1, 11, 3)>; /* IRQ5 */ + }; + /* Serial Console */ scif2_pins: serial2 { pinmux = <RZA1_PINMUX(3, 0, 6)>, /* TxD2 */ diff --git a/dts/src/arm/r7s72100.dtsi b/dts/src/arm/r7s72100.dtsi index 2211f88ede..d03dcd919d 100644 --- a/dts/src/arm/r7s72100.dtsi +++ b/dts/src/arm/r7s72100.dtsi @@ -670,6 +670,25 @@ status = "disabled"; }; + irqc: interrupt-controller@fcfef800 { + compatible = "renesas,r7s72100-irqc", + "renesas,rza1-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0xfcfef800 0x6>; + interrupt-map = + <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <7 0>; + }; + mtu2: timer@fcff0000 { compatible = "renesas,mtu2-r7s72100", "renesas,mtu2"; reg = <0xfcff0000 0x400>; diff --git a/dts/src/arm/r7s9210-rza2mevb.dts b/dts/src/arm/r7s9210-rza2mevb.dts index 991e09de12..d062d02865 100644 --- a/dts/src/arm/r7s9210-rza2mevb.dts +++ b/dts/src/arm/r7s9210-rza2mevb.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "r7s9210.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/r7s9210-pinctrl.h> / { @@ -17,6 +18,8 @@ aliases { serial0 = &scif4; + ethernet0 = ðer0; + ethernet1 = ðer1; }; chosen { @@ -24,9 +27,19 @@ stdout-path = "serial0:115200n8"; }; - memory@40000000 { - device_type = "memory"; - reg = <0x40000000 0x00800000>; /* HyperRAM */ + keyboard { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&keyboard_pins>; + + key-3 { + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_3>; + label = "SW3"; + wakeup-source; + }; }; lbsc { @@ -44,6 +57,41 @@ gpios = <&pinctrl RZA2_PIN(PORTC, 1) GPIO_ACTIVE_HIGH>; }; }; + + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x00800000>; /* HyperRAM */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +ðer0 { + pinctrl-names = "default"; + pinctrl-0 = <ð0_pins>; + status = "okay"; + renesas,no-ether-link; + phy-handle = <&phy0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +ðer1 { + pinctrl-names = "default"; + pinctrl-0 = <ð1_pins>; + status = "okay"; + renesas,no-ether-link; + phy-handle = <&phy1>; + phy1: ethernet-phy@1 { + reg = <0>; + }; }; /* EXTAL */ @@ -51,26 +99,80 @@ clock-frequency = <24000000>; /* 24MHz */ }; -/* RTC_X1 */ -&rtc_x1_clk { - clock-frequency = <32768>; +/* High resolution System tick timers */ +&ostm0 { + status = "okay"; +}; + +&ostm1 { + status = "okay"; }; &pinctrl { + eth0_pins: eth0 { + pinmux = <RZA2_PINMUX(PORTE, 0, 7)>, /* REF50CK0 */ + <RZA2_PINMUX(PORT6, 1, 7)>, /* RMMI0_TXDEN */ + <RZA2_PINMUX(PORT6, 2, 7)>, /* RMII0_TXD0 */ + <RZA2_PINMUX(PORT6, 3, 7)>, /* RMII0_TXD1 */ + <RZA2_PINMUX(PORTE, 4, 7)>, /* RMII0_CRSDV */ + <RZA2_PINMUX(PORTE, 1, 7)>, /* RMII0_RXD0 */ + <RZA2_PINMUX(PORTE, 2, 7)>, /* RMII0_RXD1 */ + <RZA2_PINMUX(PORTE, 3, 7)>, /* RMII0_RXER */ + <RZA2_PINMUX(PORTE, 5, 1)>, /* ET0_MDC */ + <RZA2_PINMUX(PORTE, 6, 1)>, /* ET0_MDIO */ + <RZA2_PINMUX(PORTL, 0, 5)>; /* IRQ4 */ + }; + + eth1_pins: eth1 { + pinmux = <RZA2_PINMUX(PORTK, 3, 7)>, /* REF50CK1 */ + <RZA2_PINMUX(PORTK, 0, 7)>, /* RMMI1_TXDEN */ + <RZA2_PINMUX(PORTK, 1, 7)>, /* RMII1_TXD0 */ + <RZA2_PINMUX(PORTK, 2, 7)>, /* RMII1_TXD1 */ + <RZA2_PINMUX(PORT3, 2, 7)>, /* RMII1_CRSDV */ + <RZA2_PINMUX(PORTK, 4, 7)>, /* RMII1_RXD0 */ + <RZA2_PINMUX(PORT3, 5, 7)>, /* RMII1_RXD1 */ + <RZA2_PINMUX(PORT3, 1, 7)>, /* RMII1_RXER */ + <RZA2_PINMUX(PORT3, 3, 1)>, /* ET1_MDC */ + <RZA2_PINMUX(PORT3, 4, 1)>, /* ET1_MDIO */ + <RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */ + }; + + keyboard_pins: keyboard { + pinmux = <RZA2_PINMUX(PORTJ, 1, 6)>; /* IRQ0 */ + }; + /* Serial Console */ scif4_pins: serial4 { pinmux = <RZA2_PINMUX(PORT9, 0, 4)>, /* TxD4 */ <RZA2_PINMUX(PORT9, 1, 4)>; /* RxD4 */ }; -}; -/* High resolution System tick timers */ -&ostm0 { - status = "okay"; + sdhi0_pins: sdhi0 { + pinmux = <RZA2_PINMUX(PORT5, 0, 3)>, /* SD0_CD */ + <RZA2_PINMUX(PORT5, 1, 3)>; /* SD0_WP */ + }; + + sdhi1_pins: sdhi1 { + pinmux = <RZA2_PINMUX(PORT5, 4, 3)>, /* SD1_CD */ + <RZA2_PINMUX(PORT5, 5, 3)>; /* SD1_WP */ + }; + + usb0_pins: usb0 { + pinmux = <RZA2_PINMUX(PORT5, 2, 3)>, /* VBUSIN0 */ + <RZA2_PINMUX(PORTC, 6, 1)>, /* VBUSEN0 */ + <RZA2_PINMUX(PORTC, 7, 1)>; /* OVRCUR0 */ + }; + + usb1_pins: usb1 { + pinmux = <RZA2_PINMUX(PORTC, 0, 1)>, /* VBUSIN1 */ + <RZA2_PINMUX(PORTC, 5, 1)>, /* VBUSEN1 */ + <RZA2_PINMUX(PORT7, 5, 5)>; /* OVRCUR1 */ + }; }; -&ostm1 { - status = "okay"; +/* RTC_X1 */ +&rtc_x1_clk { + clock-frequency = <32768>; }; /* Serial Console */ @@ -80,3 +182,38 @@ status = "okay"; }; + +&sdhi0 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhi0_pins>; + bus-width = <4>; + status = "okay"; +}; + +&sdhi1 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhi1_pins>; + bus-width = <4>; + status = "okay"; +}; + +/* USB-0 as Host */ +&usb2_phy0 { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_pins>; + dr_mode = "host"; /* Requires JP3 to be fitted */ + status = "okay"; +}; + +/* USB-1 as Host */ +&usb2_phy1 { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_pins>; + dr_mode = "host"; + status = "okay"; +}; + +/* USB_X1 */ +&usb_x1_clk { + clock-frequency = <48000000>; +}; diff --git a/dts/src/arm/r7s9210.dtsi b/dts/src/arm/r7s9210.dtsi index 22baa96f59..72b79770e3 100644 --- a/dts/src/arm/r7s9210.dtsi +++ b/dts/src/arm/r7s9210.dtsi @@ -30,6 +30,13 @@ clock-frequency = <0>; }; + usb_x1_clk: usb_x1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* If clk present, value (48000000) must be set by board */ + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -146,6 +153,152 @@ status = "disabled"; }; + spi0: spi@e800c800 { + compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz"; + reg = <0xe800c800 0x24>; + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD 97>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@e800d000 { + compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz"; + reg = <0xe800d000 0x24>; + interrupts = <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD 96>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@e800d800 { + compatible = "renesas,rspi-r7s9210", "renesas,rspi-rz"; + reg = <0xe800d800 0x24>; + interrupts = <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", "rx", "tx"; + clocks = <&cpg CPG_MOD 95>; + power-domains = <&cpg>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ether0: ethernet@e8204000 { + compatible = "renesas,ether-r7s9210"; + reg = <0xe8204000 0x200>; + interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 65>; + power-domains = <&cpg>; + + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ether1: ethernet@e8204200 { + compatible = "renesas,ether-r7s9210"; + reg = <0xe8204200 0x200>; + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 64>; + power-domains = <&cpg>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c0: i2c@e803a000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r7s9210", "renesas,riic-rz"; + reg = <0xe803a000 0x44>; + interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 233 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 87>; + power-domains = <&cpg>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@e803a400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r7s9210", "renesas,riic-rz"; + reg = <0xe803a400 0x44>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 86>; + power-domains = <&cpg>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c2: i2c@e803a800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r7s9210", "renesas,riic-rz"; + reg = <0xe803a800 0x44>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 85>; + power-domains = <&cpg>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c3: i2c@e803ac00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,riic-r7s9210", "renesas,riic-rz"; + reg = <0xe803ac00 0x44>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 257 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 258 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 84>; + power-domains = <&cpg>; + clock-frequency = <100000>; + status = "disabled"; + }; + ostm0: timer@e803b000 { compatible = "renesas,r7s9210-ostm", "renesas,ostm"; reg = <0xe803b000 0x30>; @@ -176,6 +329,120 @@ status = "disabled"; }; + ohci0: usb@e8218000 { + compatible = "generic-ohci"; + reg = <0xe8218000 0x100>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 61>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci0: usb@e8218100 { + compatible = "generic-ehci"; + reg = <0xe8218100 0x100>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 61>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy0: usb-phy@e8218200 { + compatible = "renesas,usb2-phy-r7s9210", "renesas,rcar-gen3-usb2-phy"; + reg = <0xe8218200 0x700>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 61>, <&usb_x1_clk>; + clock-names = "fck", "usb_x1"; + power-domains = <&cpg>; + #phy-cells = <0>; + status = "disabled"; + }; + + usbhs0: usb@e8219000 { + compatible = "renesas,usbhs-r7s9210", "renesas,rza2-usbhs"; + reg = <0xe8219000 0x724>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 61>; + renesas,buswait = <7>; + phys = <&usb2_phy0>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ohci1: usb@e821a000 { + compatible = "generic-ohci"; + reg = <0xe821a000 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 60>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + ehci1: usb@e821a100 { + compatible = "generic-ehci"; + reg = <0xe821a100 0x100>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 60>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + usb2_phy1: usb-phy@e821a200 { + compatible = "renesas,usb2-phy-r7s9210", "renesas,rcar-gen3-usb2-phy"; + reg = <0xe821a200 0x700>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 60>, <&usb_x1_clk>; + clock-names = "fck", "usb_x1"; + power-domains = <&cpg>; + #phy-cells = <0>; + status = "disabled"; + }; + + usbhs1: usb@e821b000 { + compatible = "renesas,usbhs-r7s9210", "renesas,rza2-usbhs"; + reg = <0xe821b000 0x724>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 60>; + renesas,buswait = <7>; + phys = <&usb2_phy1>; + phy-names = "usb"; + power-domains = <&cpg>; + status = "disabled"; + }; + + sdhi0: sd@e8228000 { + compatible = "renesas,sdhi-r7s9210"; + reg = <0xe8228000 0x8c0>; + interrupts = <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 103>, <&cpg CPG_MOD 102>; + clock-names = "core", "cd"; + power-domains = <&cpg>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi1: sd@e822a000 { + compatible = "renesas,sdhi-r7s9210"; + reg = <0xe822a000 0x8c0>; + interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 101>, <&cpg CPG_MOD 100>; + clock-names = "core", "cd"; + power-domains = <&cpg>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + gic: interrupt-controller@e8221000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -206,6 +473,25 @@ reg = <0xfcfe8004 4>; }; + irqc: interrupt-controller@fcfef800 { + compatible = "renesas,r7s9210-irqc", + "renesas,rza1-irqc"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0xfcfef800 0x6>; + interrupt-map = + <0 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <6 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <7 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <7 0>; + }; + pinctrl: pin-controller@fcffe000 { compatible = "renesas,r7s9210-pinctrl"; reg = <0xfcffe000 0x1000>; diff --git a/dts/src/arm/r8a73a4-ape6evm.dts b/dts/src/arm/r8a73a4-ape6evm.dts index f70f4a3e5c..a5351ddbf5 100644 --- a/dts/src/arm/r8a73a4-ape6evm.dts +++ b/dts/src/arm/r8a73a4-ape6evm.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r8a7740-armadillo800eva.dts b/dts/src/arm/r8a7740-armadillo800eva.dts index 32757caa25..758360a2ed 100644 --- a/dts/src/arm/r8a7740-armadillo800eva.dts +++ b/dts/src/arm/r8a7740-armadillo800eva.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=dhcp rw"; + bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=on rw"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r8a7743-sk-rzg1m.dts b/dts/src/arm/r8a7743-sk-rzg1m.dts index ca0e0fc9b2..807e7d0d6b 100644 --- a/dts/src/arm/r8a7743-sk-rzg1m.dts +++ b/dts/src/arm/r8a7743-sk-rzg1m.dts @@ -17,7 +17,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r8a7745-iwg22d-sodimm.dts b/dts/src/arm/r8a7745-iwg22d-sodimm.dts index 1db220cfc1..ce6603b099 100644 --- a/dts/src/arm/r8a7745-iwg22d-sodimm.dts +++ b/dts/src/arm/r8a7745-iwg22d-sodimm.dts @@ -42,7 +42,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial3:115200n8"; }; diff --git a/dts/src/arm/r8a7745-sk-rzg1e.dts b/dts/src/arm/r8a7745-sk-rzg1e.dts index 655b10bb42..db72a801ab 100644 --- a/dts/src/arm/r8a7745-sk-rzg1e.dts +++ b/dts/src/arm/r8a7745-sk-rzg1e.dts @@ -17,7 +17,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r8a77470-iwg23s-sbc.dts b/dts/src/arm/r8a77470-iwg23s-sbc.dts index 2840eb0d6f..450efe9230 100644 --- a/dts/src/arm/r8a77470-iwg23s-sbc.dts +++ b/dts/src/arm/r8a77470-iwg23s-sbc.dts @@ -18,7 +18,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial1:115200n8"; }; @@ -63,7 +63,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; gpios-states = <1>; states = <3300000 1 1800000 0>; diff --git a/dts/src/arm/r8a7778-bockw.dts b/dts/src/arm/r8a7778-bockw.dts index 0b49956069..6c7b07c4b9 100644 --- a/dts/src/arm/r8a7778-bockw.dts +++ b/dts/src/arm/r8a7778-bockw.dts @@ -25,7 +25,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r8a7779-marzen.dts b/dts/src/arm/r8a7779-marzen.dts index d4bee1ec90..c755f0b8fd 100644 --- a/dts/src/arm/r8a7779-marzen.dts +++ b/dts/src/arm/r8a7779-marzen.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r8a7790-lager.dts b/dts/src/arm/r8a7790-lager.dts index 7b9508e83d..83cc619861 100644 --- a/dts/src/arm/r8a7790-lager.dts +++ b/dts/src/arm/r8a7790-lager.dts @@ -56,7 +56,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -423,6 +423,8 @@ */ i2cpwr: i2c-13 { compatible = "i2c-demux-pinctrl"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; i2c-parent = <&iic3>, <&i2c3>; i2c-bus-name = "i2c-pwr"; #address-cells = <1>; @@ -615,6 +617,11 @@ function = "iic3"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + hsusb_pins: hsusb { groups = "usb0_ovc_vbus"; function = "usb0"; diff --git a/dts/src/arm/r8a7790-stout.dts b/dts/src/arm/r8a7790-stout.dts index 7a7d3b84d1..a315ba749a 100644 --- a/dts/src/arm/r8a7790-stout.dts +++ b/dts/src/arm/r8a7790-stout.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -179,6 +179,11 @@ function = "iic3"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0"; @@ -317,7 +322,7 @@ &iic3 { pinctrl-names = "default"; - pinctrl-0 = <&iic3_pins>; + pinctrl-0 = <&iic3_pins &pmic_irq_pins>; status = "okay"; pmic@58 { diff --git a/dts/src/arm/r8a7791-koelsch.dts b/dts/src/arm/r8a7791-koelsch.dts index e6580aa0ce..af6bd8fcd5 100644 --- a/dts/src/arm/r8a7791-koelsch.dts +++ b/dts/src/arm/r8a7791-koelsch.dts @@ -56,7 +56,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -540,6 +540,11 @@ function = "intc"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -776,6 +781,8 @@ }; &i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; status = "okay"; clock-frequency = <100000>; diff --git a/dts/src/arm/r8a7791-porter.dts b/dts/src/arm/r8a7791-porter.dts index fefdf8238b..d6cf16aac1 100644 --- a/dts/src/arm/r8a7791-porter.dts +++ b/dts/src/arm/r8a7791-porter.dts @@ -31,7 +31,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -228,6 +228,11 @@ function = "intc"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -373,6 +378,8 @@ }; &i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; status = "okay"; clock-frequency = <100000>; diff --git a/dts/src/arm/r8a7792-blanche.dts b/dts/src/arm/r8a7792-blanche.dts index b6fa80c3b0..248eb717eb 100644 --- a/dts/src/arm/r8a7792-blanche.dts +++ b/dts/src/arm/r8a7792-blanche.dts @@ -21,7 +21,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -234,6 +234,11 @@ groups = "du1_rgb666", "du1_sync", "du1_disp"; function = "du1"; }; + + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; }; &rwdt { @@ -314,6 +319,8 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; interrupt-parent = <&irqc>; interrupts = <2 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; diff --git a/dts/src/arm/r8a7792-wheat.dts b/dts/src/arm/r8a7792-wheat.dts index f46f4567b3..bd2a63bdab 100644 --- a/dts/src/arm/r8a7792-wheat.dts +++ b/dts/src/arm/r8a7792-wheat.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r8a7792.dtsi b/dts/src/arm/r8a7792.dtsi index 38fb43d11b..c4ea2d6760 100644 --- a/dts/src/arm/r8a7792.dtsi +++ b/dts/src/arm/r8a7792.dtsi @@ -875,6 +875,40 @@ compatible = "renesas,prr"; reg = <0 0xff000044 0 4>; }; + + cmt0: timer@ffca0000 { + compatible = "renesas,r8a7792-cmt0", + "renesas,rcar-gen2-cmt0"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 124>; + + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a7792-cmt1", + "renesas,rcar-gen2-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 329>; + clock-names = "fck"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + resets = <&cpg 329>; + + status = "disabled"; + }; }; timer { diff --git a/dts/src/arm/r8a7793-gose.dts b/dts/src/arm/r8a7793-gose.dts index f51601af89..42f3313e69 100644 --- a/dts/src/arm/r8a7793-gose.dts +++ b/dts/src/arm/r8a7793-gose.dts @@ -52,7 +52,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -514,6 +514,11 @@ function = "intc"; }; + pmic_irq_pins: pmicirq { + groups = "intc_irq2"; + function = "intc"; + }; + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; @@ -711,6 +716,8 @@ }; &i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins>; status = "okay"; clock-frequency = <100000>; diff --git a/dts/src/arm/r8a7794-alt.dts b/dts/src/arm/r8a7794-alt.dts index 0ab3d8d57f..1d22fcdc5d 100644 --- a/dts/src/arm/r8a7794-alt.dts +++ b/dts/src/arm/r8a7794-alt.dts @@ -22,7 +22,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/r8a7794-silk.dts b/dts/src/arm/r8a7794-silk.dts index 60e91ebfa6..b3177aea45 100644 --- a/dts/src/arm/r8a7794-silk.dts +++ b/dts/src/arm/r8a7794-silk.dts @@ -34,7 +34,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/rk322x.dtsi b/dts/src/arm/rk322x.dtsi index da102fff96..340ed6ccb0 100644 --- a/dts/src/arm/rk322x.dtsi +++ b/dts/src/arm/rk322x.dtsi @@ -143,6 +143,11 @@ #clock-cells = <0>; }; + display_subsystem: display-subsystem { + compatible = "rockchip,display-subsystem"; + ports = <&vop_out>; + }; + i2s1: i2s1@100b0000 { compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; reg = <0x100b0000 0x4000>; @@ -529,6 +534,17 @@ status = "disabled"; }; + hdmi_phy: hdmi-phy@12030000 { + compatible = "rockchip,rk3228-hdmi-phy"; + reg = <0x12030000 0x10000>; + clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMI_PHY>; + clock-names = "sysclk", "refoclk", "refpclk"; + #clock-cells = <0>; + clock-output-names = "hdmiphy_phy"; + #phy-cells = <0>; + status = "disabled"; + }; + gpu: gpu@20000000 { compatible = "rockchip,rk3228-mali", "arm,mali-400"; reg = <0x20000000 0x10000>; @@ -572,6 +588,28 @@ status = "disabled"; }; + vop: vop@20050000 { + compatible = "rockchip,rk3228-vop"; + reg = <0x20050000 0x1ffc>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_VOP>, <&cru DCLK_VOP>, <&cru HCLK_VOP>; + clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + resets = <&cru SRST_VOP_A>, <&cru SRST_VOP_H>, <&cru SRST_VOP_D>; + reset-names = "axi", "ahb", "dclk"; + iommus = <&vop_mmu>; + status = "disabled"; + + vop_out: port { + #address-cells = <1>; + #size-cells = <0>; + + vop_out_hdmi: endpoint@0 { + reg = <0>; + remote-endpoint = <&hdmi_in_vop>; + }; + }; + }; + vop_mmu: iommu@20053f00 { compatible = "rockchip,iommu"; reg = <0x20053f00 0x100>; @@ -579,7 +617,7 @@ interrupt-names = "vop_mmu"; clocks = <&cru ACLK_VOP>, <&cru HCLK_VOP>; clock-names = "aclk", "iface"; - iommu-cells = <0>; + #iommu-cells = <0>; status = "disabled"; }; @@ -594,6 +632,36 @@ status = "disabled"; }; + hdmi: hdmi@200a0000 { + compatible = "rockchip,rk3228-dw-hdmi"; + reg = <0x200a0000 0x20000>; + reg-io-width = <4>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&cru SCLK_HDMI_PHY>; + assigned-clock-parents = <&hdmi_phy>; + clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>; + clock-names = "isfr", "iahb", "cec"; + pinctrl-names = "default"; + pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>; + resets = <&cru SRST_HDMI_P>; + reset-names = "hdmi"; + phys = <&hdmi_phy>; + phy-names = "hdmi"; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + hdmi_in: port { + #address-cells = <1>; + #size-cells = <0>; + hdmi_in_vop: endpoint@0 { + reg = <0>; + remote-endpoint = <&vop_out_hdmi>; + }; + }; + }; + }; + sdmmc: dwmmc@30000000 { compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x30000000 0x4000>; @@ -922,6 +990,21 @@ }; }; + hdmi { + hdmi_hpd: hdmi-hpd { + rockchip,pins = <0 RK_PB7 1 &pcfg_pull_down>; + }; + + hdmii2c_xfer: hdmii2c-xfer { + rockchip,pins = <0 RK_PA6 2 &pcfg_pull_none>, + <0 RK_PA7 2 &pcfg_pull_none>; + }; + + hdmi_cec: hdmi-cec { + rockchip,pins = <0 RK_PC4 1 &pcfg_pull_none>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>, diff --git a/dts/src/arm/rk3288-veyron-chromebook.dtsi b/dts/src/arm/rk3288-veyron-chromebook.dtsi index fbef345781..1cadb522fd 100644 --- a/dts/src/arm/rk3288-veyron-chromebook.dtsi +++ b/dts/src/arm/rk3288-veyron-chromebook.dtsi @@ -70,6 +70,21 @@ pinctrl-0 = <&ac_present_ap>; }; + lid_switch: lid-switch { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&ap_lid_int_l>; + + lid { + label = "Lid"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <SW_LID>; + linux,input-type = <EV_SW>; + debounce-interval = <1>; + }; + }; + panel: panel { compatible ="innolux,n116bge", "simple-panel"; status = "okay"; @@ -149,18 +164,6 @@ status = "okay"; }; -&gpio_keys { - pinctrl-0 = <&pwr_key_l &ap_lid_int_l>; - lid { - label = "Lid"; - gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; - wakeup-source; - linux,code = <0>; /* SW_LID */ - linux,input-type = <5>; /* EV_SW */ - debounce-interval = <1>; - }; -}; - &pwm0 { status = "okay"; }; @@ -234,6 +237,7 @@ /* Wake only */ &suspend_l_wake + &bt_dev_wake_awake >; pinctrl-1 = < /* Common for sleep and wake, but no owners */ @@ -243,6 +247,7 @@ /* Sleep only */ &suspend_l_sleep + &bt_dev_wake_sleep >; backlight { diff --git a/dts/src/arm/rk3288-veyron-jaq.dts b/dts/src/arm/rk3288-veyron-jaq.dts index e248f55ee8..fcd119168c 100644 --- a/dts/src/arm/rk3288-veyron-jaq.dts +++ b/dts/src/arm/rk3288-veyron-jaq.dts @@ -135,6 +135,213 @@ pinctrl-0 = <&vcc50_hdmi_en>; }; +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "DDRIO_PWROFF", + "DDRIO_RETEN", + "TS3A227E_INT_L", + "PMIC_INT_L", + "PWR_KEY_L", + "AP_LID_INT_L", + "EC_IN_RW", + + "AC_PRESENT_AP", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OTP_OUT", + "HOST1_PWR_EN", + "USBOTG_PWREN_H", + "AP_WARM_RESET_H", + "nFALUT2", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "SUSPEND_L", + "USB_INT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "", + "EMMC_RST_L", + "", + "", + "BL_PWR_EN", + "AVDD_1V8_DISP_EN"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS", + "UART0_RTS", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "BT_DEV_WAKE", /* Maybe missing from mighty? */ + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "SPI0_CLK", + "SPI0_CS0", + "SPI0_TXD", + "SPI0_RXD", + + "", + "", + "", + "VCC50_HDMI_EN"; +}; + +&gpio6 { + gpio-line-names = "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI", + "I2S0_SDO0", + "HP_DET_H", + "ALS_INT", + "INT_CODEC", + + "I2S0_CLK", + "I2C2_SDA", + "I2C2_SCL", + "MICDET", + "", + "", + "", + "", + + "SDMMC_D0", + "SDMMC_D1", + "SDMMC_D2", + "SDMMC_D3", + "SDMMC_CLK", + "SDMMC_CMD"; +}; + +&gpio7 { + gpio-line-names = "LCDC_BL", + "PWM_LOG", + "BL_EN", + "TRACKPAD_INT", + "TPM_INT_H", + "SDMMC_DET_L", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "EC_INT", + + "CPU_NMI", + "DVSOK", + "SDMMC_WP", /* mighty only */ + "EDP_HPD", + "DVS1", + "nFALUT1", /* nFAULT1 on jaq */ + "LCD_EN", + "DVS2", + + "VCC5V_GOOD_H", + "I2C4_SDA_TP", + "I2C4_SCL_TP", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "5V_DRV", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + &pinctrl { backlight { bl_pwr_en: bl_pwr_en { diff --git a/dts/src/arm/rk3288-veyron-jerry.dts b/dts/src/arm/rk3288-veyron-jerry.dts index b1613af83d..164561f04c 100644 --- a/dts/src/arm/rk3288-veyron-jerry.dts +++ b/dts/src/arm/rk3288-veyron-jerry.dts @@ -103,6 +103,213 @@ pinctrl-0 = <&vcc50_hdmi_en>; }; +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "DDRIO_PWROFF", + "DDRIO_RETEN", + "TS3A227E_INT_L", + "PMIC_INT_L", + "PWR_KEY_L", + "AP_LID_INT_L", + "EC_IN_RW", + + "AC_PRESENT_AP", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OTP_OUT", + "HOST1_PWR_EN", + "USBOTG_PWREN_H", + "AP_WARM_RESET_H", + "nFAULT2", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "SUSPEND_L", + "USB_INT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "", + "EMMC_RST_L", + "", + "", + "BL_PWR_EN", + "AVDD_1V8_DISP_EN"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS", + "UART0_RTS", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "BT_DEV_WAKE", + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "SPI0_CLK", + "SPI0_CS0", + "SPI0_TXD", + "SPI0_RXD", + + "", + "", + "", + "VCC50_HDMI_EN"; +}; + +&gpio6 { + gpio-line-names = "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI", + "I2S0_SDO0", + "HP_DET_H", + "", + "INT_CODEC", + + "I2S0_CLK", + "I2C2_SDA", + "I2C2_SCL", + "MICDET", + "", + "", + "", + "", + + "SDMMC_D0", + "SDMMC_D1", + "SDMMC_D2", + "SDMMC_D3", + "SDMMC_CLK", + "SDMMC_CMD"; +}; + +&gpio7 { + gpio-line-names = "LCDC_BL", + "PWM_LOG", + "BL_EN", + "TRACKPAD_INT", + "TPM_INT_H", + "SDMMC_DET_L", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "EC_INT", + + "CPU_NMI", + "DVSOK", + "", + "EDP_HPD", + "DVS1", + "nFAULT1", + "LCD_EN", + "DVS2", + + "VCC5V_GOOD_H", + "I2C4_SDA_TP", + "I2C4_SCL_TP", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "5V_DRV", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + &pinctrl { backlight { bl_pwr_en: bl_pwr_en { diff --git a/dts/src/arm/rk3288-veyron-mickey.dts b/dts/src/arm/rk3288-veyron-mickey.dts index e852594417..aa352d40c9 100644 --- a/dts/src/arm/rk3288-veyron-mickey.dts +++ b/dts/src/arm/rk3288-veyron-mickey.dts @@ -75,9 +75,7 @@ cooling-maps { /* * After 1st level, throttle the CPU down to as low as 1.4 GHz - * and don't let the GPU go faster than 400 MHz. Note that we - * won't throttle the GPU lower than 400 MHz due to CPU - * heat--we'll let the GPU do the rest itself. + * and don't let the GPU go faster than 400 MHz. */ cpu_warm_limit_cpu { trip = <&cpu_alert_warm>; @@ -86,6 +84,10 @@ <&cpu2 THERMAL_NO_LIMIT 4>, <&cpu3 THERMAL_NO_LIMIT 4>; }; + cpu_warm_limit_gpu { + trip = <&cpu_alert_warm>; + cooling-device = <&gpu 1 1>; + }; /* * Add some discrete steps to help throttling system deal @@ -125,11 +127,80 @@ <&cpu2 8 THERMAL_NO_LIMIT>, <&cpu3 8 THERMAL_NO_LIMIT>; }; + + /* At very hot, don't let GPU go over 300 MHz */ + cpu_very_hot_limit_gpu { + trip = <&cpu_alert_very_hot>; + cooling-device = <&gpu 2 2>; + }; }; }; -&emmc { - /delete-property/mmc-hs200-1_8v; +&gpu_thermal { + /delete-node/ trips; + /delete-node/ cooling-maps; + + trips { + gpu_alert_warmish: gpu_alert_warmish { + temperature = <60000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu_alert_warm: gpu_alert_warm { + temperature = <65000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu_alert_hotter: gpu_alert_hotter { + temperature = <84000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu_alert_very_very_hot: gpu_alert_very_very_hot { + temperature = <86000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + gpu_crit: gpu_crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + /* After 1st level throttle the GPU down to as low as 400 MHz */ + gpu_warmish_limit_gpu { + trip = <&gpu_alert_warmish>; + cooling-device = <&gpu THERMAL_NO_LIMIT 1>; + }; + + /* + * Slightly after we throttle the GPU, we'll also make sure that + * the CPU can't go faster than 1.4 GHz. Note that we won't + * throttle the CPU lower than 1.4 GHz due to GPU heat--we'll + * let the CPU do the rest itself. + */ + gpu_warm_limit_cpu { + trip = <&gpu_alert_warm>; + cooling-device = <&cpu0 4 4>, + <&cpu1 4 4>, + <&cpu2 4 4>, + <&cpu3 4 4>; + }; + + /* When hot, GPU goes down to 300 MHz */ + gpu_hotter_limit_gpu { + trip = <&gpu_alert_hotter>; + cooling-device = <&gpu 2 2>; + }; + + /* When really hot, don't let GPU go _above_ 300 MHz */ + gpu_very_very_hot_limit_gpu { + trip = <&gpu_alert_very_very_hot>; + cooling-device = <&gpu 2 THERMAL_NO_LIMIT>; + }; + }; }; &i2c2 { @@ -142,8 +213,6 @@ &i2s { status = "okay"; - clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_OUT>; }; &rk808 { @@ -183,6 +252,157 @@ }; }; +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "", + "", + "", + "PMIC_INT_L", + "POWER_BUTTON_L", + "", + "", + + "", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OT_RESET", + "", + "", + "AP_WARM_RESET_H", + "", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "", + "nFALUT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "", + "EMMC_RST_L"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS_L", + "UART0_RTS_L", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "BT_DEV_WAKE", + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio7 { + gpio-line-names = "", + "PWM_LOG", + "", + "", + "TPM_INT_H", + "SDMMC_DET_L", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "", + + "CPU_NMI", + "DVSOK", + "HDMI_WAKE", + "POWER_HDMI_ON", + "DVS1", + "", + "", + "DVS2", + + "HDMI_CEC", + "", + "", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + &pinctrl { hdmi { power_hdmi_on: power-hdmi-on { diff --git a/dts/src/arm/rk3288-veyron-minnie.dts b/dts/src/arm/rk3288-veyron-minnie.dts index 468a181854..9008e703c0 100644 --- a/dts/src/arm/rk3288-veyron-minnie.dts +++ b/dts/src/arm/rk3288-veyron-minnie.dts @@ -48,6 +48,26 @@ regulator-boot-on; vin-supply = <&vcc18_wl>; }; + + volume_buttons: volume-buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&volum_down_l &volum_up_l>; + + volum_down { + label = "Volum_down"; + gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <100>; + }; + + volum_up { + label = "Volum_up"; + gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <100>; + }; + }; }; &backlight { @@ -86,30 +106,6 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; power-supply = <&backlight_regulator>; - post-pwm-on-delay-ms = <200>; - pwm-off-delay-ms = <200>; -}; - -&emmc { - /delete-property/mmc-hs200-1_8v; -}; - -&gpio_keys { - pinctrl-0 = <&pwr_key_l &ap_lid_int_l &volum_down_l &volum_up_l>; - - volum_down { - label = "Volum_down"; - gpios = <&gpio5 RK_PB3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - debounce-interval = <100>; - }; - - volum_up { - label = "Volum_up"; - gpios = <&gpio5 RK_PB2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - debounce-interval = <100>; - }; }; &i2c_tunnel { @@ -188,6 +184,218 @@ pinctrl-0 = <&vcc50_hdmi_en>; }; +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "DDRIO_PWROFF", + "DDRIO_RETEN", + "TS3A227E_INT_L", + "PMIC_INT_L", + "PWR_KEY_L", + "AP_LID_INT_L", + "EC_IN_RW", + + "AC_PRESENT_AP", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OTP_OUT", + "HOST1_PWR_EN", + "USBOTG_PWREN_H", + "AP_WARM_RESET_H", + "nFALUT2", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "SUSPEND_L", + "USB_INT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "PROCHOT#", + "EMMC_RST_L", + "", + "", + "BL_PWR_EN", + "AVDD_1V8_DISP_EN", + "TOUCH_INT", + "TOUCH_RST", + + "I2C3_SCL_TP", + "I2C3_SDA_TP"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS", + "UART0_RTS", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "dev_wake", + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "Volum_Up#", + "Volum_Down#", + "SPI0_CLK", + "SPI0_CS0", + "SPI0_TXD", + "SPI0_RXD", + + "", + "", + "", + "VCC50_HDMI_EN"; +}; + +&gpio6 { + gpio-line-names = "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI", + "I2S0_SDO0", + "HP_DET_H", + "", + "INT_CODEC", + + "I2S0_CLK", + "I2C2_SDA", + "I2C2_SCL", + "MICDET", + "", + "", + "", + "", + + "SDMMC_D0", + "SDMMC_D1", + "SDMMC_D2", + "SDMMC_D3", + "SDMMC_CLK", + "SDMMC_CMD"; +}; + +&gpio7 { + gpio-line-names = "LCDC_BL", + "PWM_LOG", + "BL_EN", + "TRACKPAD_INT", + "TPM_INT_H", + "SDMMC_DET_L", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "EC_INT", + + "CPU_NMI", + "DVS_OK", + "SDMMC_WP", + "EDP_HPD", + "DVS1", + "nFALUT1", + "LCD_EN", + "DVS2", + + "VCC5V_GOOD_H", + "I2C4_SDA_TP", + "I2C4_SCL_TP", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "5V_DRV", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + &pinctrl { backlight { bl_pwr_en: bl_pwr_en { diff --git a/dts/src/arm/rk3288-veyron-pinky.dts b/dts/src/arm/rk3288-veyron-pinky.dts index 9645be7b3d..9b6f4d9b03 100644 --- a/dts/src/arm/rk3288-veyron-pinky.dts +++ b/dts/src/arm/rk3288-veyron-pinky.dts @@ -35,7 +35,7 @@ force-hpd; }; -&gpio_keys { +&lid_switch { pinctrl-0 = <&pwr_key_h &ap_lid_int_l>; power { diff --git a/dts/src/arm/rk3288-veyron-speedy.dts b/dts/src/arm/rk3288-veyron-speedy.dts index 2ac8748a3a..9b140db044 100644 --- a/dts/src/arm/rk3288-veyron-speedy.dts +++ b/dts/src/arm/rk3288-veyron-speedy.dts @@ -64,6 +64,10 @@ temperature = <70000>; }; +&cpu_crit { + temperature = <90000>; +}; + &edp { /delete-property/pinctrl-names; /delete-property/pinctrl-0; @@ -71,6 +75,14 @@ force-hpd; }; +&gpu_alert0 { + temperature = <80000>; +}; + +&gpu_crit { + temperature = <90000>; +}; + &panel { power-supply= <&panel_regulator>; }; @@ -101,6 +113,213 @@ pinctrl-0 = <&vcc50_hdmi_en>; }; +&gpio0 { + gpio-line-names = "PMIC_SLEEP_AP", + "DDRIO_PWROFF", + "DDRIO_RETEN", + "TS3A227E_INT_L", + "PMIC_INT_L", + "PWR_KEY_L", + "AP_LID_INT_L", + "EC_IN_RW", + + "AC_PRESENT_AP", + /* + * RECOVERY_SW_L is Chrome OS ABI. Schematics call + * it REC_MODE_L. + */ + "RECOVERY_SW_L", + "OTP_OUT", + "HOST1_PWR_EN", + "USBOTG_PWREN_H", + "AP_WARM_RESET_H", + "nFALUT2", + "I2C0_SDA_PMIC", + + "I2C0_SCL_PMIC", + "SUSPEND_L", + "USB_INT"; +}; + +&gpio2 { + gpio-line-names = "CONFIG0", + "CONFIG1", + "CONFIG2", + "", + "", + "", + "", + "CONFIG3", + + "PWRLIMIT#_CPU", + "EMMC_RST_L", + "", + "", + "BL_PWR_EN", + "AVDD_1V8_DISP_EN"; +}; + +&gpio3 { + gpio-line-names = "FLASH0_D0", + "FLASH0_D1", + "FLASH0_D2", + "FLASH0_D3", + "FLASH0_D4", + "FLASH0_D5", + "FLASH0_D6", + "FLASH0_D7", + + "", + "", + "", + "", + "", + "", + "", + "", + + "FLASH0_CS2/EMMC_CMD", + "", + "FLASH0_DQS/EMMC_CLKO"; +}; + +&gpio4 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "", + "", + "", + "", + + "UART0_RXD", + "UART0_TXD", + "UART0_CTS", + "UART0_RTS", + "SDIO0_D0", + "SDIO0_D1", + "SDIO0_D2", + "SDIO0_D3", + + "SDIO0_CMD", + "SDIO0_CLK", + "BT_DEV_WAKE", + "", + "WIFI_ENABLE_H", + "BT_ENABLE_L", + "WIFI_HOST_WAKE", + "BT_HOST_WAKE"; +}; + +&gpio5 { + gpio-line-names = "", + "", + "", + "", + "", + "", + "", + "", + + "", + "", + "", + "", + "SPI0_CLK", + "SPI0_CS0", + "SPI0_TXD", + "SPI0_RXD", + + "", + "", + "", + "VCC50_HDMI_EN"; +}; + +&gpio6 { + gpio-line-names = "I2S0_SCLK", + "I2S0_LRCK_RX", + "I2S0_LRCK_TX", + "I2S0_SDI", + "I2S0_SDO0", + "HP_DET_H", + "ALS_INT", /* not connected */ + "INT_CODEC", + + "I2S0_CLK", + "I2C2_SDA", + "I2C2_SCL", + "MICDET", + "", + "", + "", + "", + + "SDMMC_D0", + "SDMMC_D1", + "SDMMC_D2", + "SDMMC_D3", + "SDMMC_CLK", + "SDMMC_CMD"; +}; + +&gpio7 { + gpio-line-names = "LCDC_BL", + "PWM_LOG", + "BL_EN", + "TRACKPAD_INT", + "TPM_INT_H", + "SDMMC_DET_L", + /* + * AP_FLASH_WP_L is Chrome OS ABI. Schematics call + * it FW_WP_AP. + */ + "AP_FLASH_WP_L", + "EC_INT", + + "CPU_NMI", + "DVS_OK", + "", + "EDP_HOTPLUG", + "DVS1", + "nFALUT1", + "LCD_EN", + "DVS2", + + "VCC5V_GOOD_H", + "I2C4_SDA_TP", + "I2C4_SCL_TP", + "I2C5_SDA_HDMI", + "I2C5_SCL_HDMI", + "5V_DRV", + "UART2_RXD", + "UART2_TXD"; +}; + +&gpio8 { + gpio-line-names = "RAM_ID0", + "RAM_ID1", + "RAM_ID2", + "RAM_ID3", + "I2C1_SDA_TPM", + "I2C1_SCL_TPM", + "SPI2_CLK", + "SPI2_CS0", + + "SPI2_RXD", + "SPI2_TXD"; +}; + &pinctrl { backlight { bl_pwr_en: bl_pwr_en { diff --git a/dts/src/arm/rk3288-veyron.dtsi b/dts/src/arm/rk3288-veyron.dtsi index 1252522392..8fc8eac699 100644 --- a/dts/src/arm/rk3288-veyron.dtsi +++ b/dts/src/arm/rk3288-veyron.dtsi @@ -23,11 +23,36 @@ reg = <0x0 0x0 0x0 0x80000000>; }; - gpio_keys: gpio-keys { + bt_activity: bt-activity { compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake>; + + /* + * HACK: until we have an LPM driver, we'll use an + * ugly GPIO key to allow Bluetooth to wake from S3. + * This is expected to only be used by BT modules that + * use UART for comms. For BT modules that talk over + * SDIO we should use a wakeup mechanism related to SDIO. + * + * Use KEY_RESERVED here since that will work as a wakeup but + * doesn't get reported to higher levels (so doesn't confuse + * Chrome). + */ + bt-wake { + label = "BT Wakeup"; + gpios = <&gpio4 RK_PD7 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_RESERVED>; + wakeup-source; + }; + + }; + power_button: power-button { + compatible = "gpio-keys"; pinctrl-names = "default"; pinctrl-0 = <&pwr_key_l>; + power { label = "Power"; gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; @@ -123,6 +148,10 @@ cpu0-supply = <&vdd_cpu>; }; +&cpu_crit { + temperature = <100000>; +}; + /* rk3288-c used in Veyron Chrome-devices has slightly changed OPPs */ &cpu_opp_table { /delete-node/ opp-312000000; @@ -162,8 +191,18 @@ status = "okay"; }; +&gpu_alert0 { + temperature = <72500>; +}; + +&gpu_crit { + temperature = <100000>; +}; + &hdmi { - ddc-i2c-bus = <&i2c5>; + pinctrl-names = "default", "unwedge"; + pinctrl-0 = <&hdmi_ddc>; + pinctrl-1 = <&hdmi_ddc_unwedge>; status = "okay"; }; @@ -334,14 +373,6 @@ i2c-scl-rising-time-ns = <300>; /* 225ns measured */ }; -&i2c5 { - status = "okay"; - - clock-frequency = <100000>; - i2c-scl-falling-time-ns = <300>; - i2c-scl-rising-time-ns = <1000>; -}; - &io_domains { status = "okay"; @@ -394,6 +425,7 @@ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-temp = <125000>; }; &uart0 { @@ -424,6 +456,7 @@ &usb_host1 { status = "okay"; + snps,need-phy-for-wake; }; &usb_otg { @@ -432,6 +465,7 @@ assigned-clocks = <&cru SCLK_USBPHY480M_SRC>; assigned-clock-parents = <&usbphy0>; dr_mode = "host"; + snps,need-phy-for-wake; }; &vopb { @@ -453,12 +487,18 @@ &ddr0_retention &ddrio_pwroff &global_pwroff + + /* Wake only */ + &bt_dev_wake_awake >; pinctrl-1 = < /* Common for sleep and wake, but no owners */ &ddr0_retention &ddrio_pwroff &global_pwroff + + /* Sleep only */ + &bt_dev_wake_sleep >; pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { @@ -542,6 +582,10 @@ rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; }; + bt_host_wake: bt-host-wake { + rockchip,pins = <4 RK_PD7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + /* * We run sdio0 at max speed; bump up drive strength. * We also have external pulls, so disable the internal ones. @@ -560,6 +604,20 @@ sdio0_clk: sdio0-clk { rockchip,pins = <4 RK_PD1 1 &pcfg_pull_none_drv_8ma>; }; + + /* + * These pins are only present on very new veyron boards; on + * older boards bt_dev_wake is simply always high. Note that + * gpio4_D2 is a NC on old veyron boards, so it doesn't hurt + * to map this pin everywhere + */ + bt_dev_wake_sleep: bt-dev-wake-sleep { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_low>; + }; + + bt_dev_wake_awake: bt-dev-wake-awake { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_output_high>; + }; }; tpm { diff --git a/dts/src/arm/rk3288.dtsi b/dts/src/arm/rk3288.dtsi index aa017abf4f..cc893e154f 100644 --- a/dts/src/arm/rk3288.dtsi +++ b/dts/src/arm/rk3288.dtsi @@ -231,6 +231,7 @@ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; clock-frequency = <24000000>; + arm,no-tick-in-suspend; }; timer: timer@ff810000 { @@ -551,10 +552,7 @@ map0 { trip = <&gpu_alert0>; cooling-device = - <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; }; }; }; @@ -682,7 +680,7 @@ #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; - clocks = <&cru PCLK_PWM>; + clocks = <&cru PCLK_RKPWM>; clock-names = "pwm"; status = "disabled"; }; @@ -693,7 +691,7 @@ #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm1_pin>; - clocks = <&cru PCLK_PWM>; + clocks = <&cru PCLK_RKPWM>; clock-names = "pwm"; status = "disabled"; }; @@ -704,7 +702,7 @@ #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm2_pin>; - clocks = <&cru PCLK_PWM>; + clocks = <&cru PCLK_RKPWM>; clock-names = "pwm"; status = "disabled"; }; @@ -712,10 +710,10 @@ pwm3: pwm@ff680030 { compatible = "rockchip,rk3288-pwm"; reg = <0x0 0xff680030 0x0 0x10>; - #pwm-cells = <2>; + #pwm-cells = <3>; pinctrl-names = "default"; pinctrl-0 = <&pwm3_pin>; - clocks = <&cru PCLK_PWM>; + clocks = <&cru PCLK_RKPWM>; clock-names = "pwm"; status = "disabled"; }; @@ -1285,6 +1283,7 @@ interrupt-names = "job", "mmu", "gpu"; clocks = <&cru ACLK_GPU>; operating-points-v2 = <&gpu_opp_table>; + #cooling-cells = <2>; /* min followed by max */ power-domains = <&power RK3288_PD_GPU>; status = "disabled"; }; @@ -1308,10 +1307,6 @@ opp-hz = /bits/ 64 <400000000>; opp-microvolt = <1100000>; }; - opp-500000000 { - opp-hz = /bits/ 64 <500000000>; - opp-microvolt = <1200000>; - }; opp-600000000 { opp-hz = /bits/ 64 <600000000>; opp-microvolt = <1250000>; @@ -1552,6 +1547,15 @@ rockchip,pins = <7 RK_PC3 2 &pcfg_pull_none>, <7 RK_PC4 2 &pcfg_pull_none>; }; + + hdmi_ddc_unwedge: hdmi-ddc-unwedge { + rockchip,pins = <7 RK_PC3 RK_FUNC_GPIO &pcfg_output_low>, + <7 RK_PC4 2 &pcfg_pull_none>; + }; + }; + + pcfg_output_low: pcfg-output-low { + output-low; }; pcfg_pull_up: pcfg-pull-up { diff --git a/dts/src/arm/sama5d3.dtsi b/dts/src/arm/sama5d3.dtsi index 3bbc84bf8d..f770aace0e 100644 --- a/dts/src/arm/sama5d3.dtsi +++ b/dts/src/arm/sama5d3.dtsi @@ -1371,30 +1371,11 @@ status = "disabled"; }; - sckc@fffffe50 { - compatible = "atmel,at91sam9x5-sckc"; + clk32k: sckc@fffffe50 { + compatible = "atmel,sama5d3-sckc"; reg = <0xfffffe50 0x4>; - - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-accuracy = <50000000>; - atmel,startup-time-usec = <75>; - }; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - clocks = <&slow_xtal>; - atmel,startup-time-usec = <1200000>; - }; - - clk32k: slowck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_osc>; - }; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; rtc@fffffeb0 { diff --git a/dts/src/arm/sh73a0-kzm9g.dts b/dts/src/arm/sh73a0-kzm9g.dts index daac0c6078..1916f31a30 100644 --- a/dts/src/arm/sh73a0-kzm9g.dts +++ b/dts/src/arm/sh73a0-kzm9g.dts @@ -36,7 +36,7 @@ }; chosen { - bootargs = "root=/dev/nfs ip=dhcp ignore_loglevel rw"; + bootargs = "root=/dev/nfs ip=on ignore_loglevel rw"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm/socfpga_arria10.dtsi b/dts/src/arm/socfpga_arria10.dtsi index ae24599d58..a0a6d85072 100644 --- a/dts/src/arm/socfpga_arria10.dtsi +++ b/dts/src/arm/socfpga_arria10.dtsi @@ -418,7 +418,7 @@ }; gmac0: ethernet@ff800000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac"; altr,sysmgr-syscon = <&sysmgr 0x44 0>; reg = <0xff800000 0x2000>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; @@ -431,15 +431,15 @@ rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; clock-names = "stmmaceth"; - resets = <&rst EMAC0_RESET>; - reset-names = "stmmaceth"; + resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; gmac1: ethernet@ff802000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; - altr,sysmgr-syscon = <&sysmgr 0x48 0>; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac"; + altr,sysmgr-syscon = <&sysmgr 0x48 8>; reg = <0xff802000 0x2000>; interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -451,15 +451,15 @@ rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; clock-names = "stmmaceth"; - resets = <&rst EMAC1_RESET>; - reset-names = "stmmaceth"; + resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; gmac2: ethernet@ff804000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; - altr,sysmgr-syscon = <&sysmgr 0x4C 0>; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.72a", "snps,dwmac"; + altr,sysmgr-syscon = <&sysmgr 0x4C 16>; reg = <0xff804000 0x2000>; interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; @@ -470,8 +470,9 @@ tx-fifo-depth = <4096>; rx-fifo-depth = <16384>; clocks = <&l4_mp_clk>; - resets = <&rst EMAC2_RESET>; clock-names = "stmmaceth"; + resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; + reset-names = "stmmaceth", "stmmaceth-ocp"; snps,axi-config = <&socfpga_axi_setup>; status = "disabled"; }; diff --git a/dts/src/arm/socfpga_arria10_socdk.dtsi b/dts/src/arm/socfpga_arria10_socdk.dtsi index 360dae5a5b..0efbeccc5c 100644 --- a/dts/src/arm/socfpga_arria10_socdk.dtsi +++ b/dts/src/arm/socfpga_arria10_socdk.dtsi @@ -48,6 +48,13 @@ }; }; + ref_033v: 033-v-ref { + compatible = "regulator-fixed"; + regulator-name = "0.33V"; + regulator-min-microvolt = <330000>; + regulator-max-microvolt = <330000>; + }; + soc { clkmgr@ffd04000 { clocks { @@ -128,6 +135,18 @@ i2c-sda-falling-time-ns = <6000>; i2c-scl-falling-time-ns = <6000>; + adc@14 { + compatible = "lltc,ltc2497"; + reg = <0x14>; + vref-supply = <&ref_033v>; + }; + + adc@16 { + compatible = "lltc,ltc2497"; + reg = <0x16>; + vref-supply = <&ref_033v>; + }; + eeprom@51 { compatible = "atmel,24c32"; reg = <0x51>; diff --git a/dts/src/arm/stm32746g-eval.dts b/dts/src/arm/stm32746g-eval.dts index d90b0d1e18..2b1664884a 100644 --- a/dts/src/arm/stm32746g-eval.dts +++ b/dts/src/arm/stm32746g-eval.dts @@ -44,6 +44,7 @@ #include "stm32f746.dtsi" #include "stm32f746-pinctrl.dtsi" #include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "STMicroelectronics STM32746g-EVAL board"; @@ -69,9 +70,15 @@ gpios = <&gpiof 10 1>; linux,default-trigger = "heartbeat"; }; + orange { + gpios = <&stmfx_pinctrl 17 1>; + }; red { gpios = <&gpiob 7 1>; }; + blue { + gpios = <&stmfx_pinctrl 19 1>; + }; }; gpio_keys { @@ -86,6 +93,43 @@ }; }; + joystick { + compatible = "gpio-keys"; + #size-cells = <0>; + pinctrl-0 = <&joystick_pins>; + pinctrl-names = "default"; + button-0 { + label = "JoySel"; + linux,code = <KEY_ENTER>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + }; + button-1 { + label = "JoyDown"; + linux,code = <KEY_DOWN>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + button-2 { + label = "JoyLeft"; + linux,code = <KEY_LEFT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + }; + button-3 { + label = "JoyRight"; + linux,code = <KEY_RIGHT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + }; + button-4 { + label = "JoyUp"; + linux,code = <KEY_UP>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + }; + }; + usbotg_hs_phy: usb-phy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; @@ -115,6 +159,28 @@ i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; + + stmfx: stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + + stmfx_pinctrl: stmfx-pin-controller { + compatible = "st,stmfx-0300-pinctrl"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&stmfx_pinctrl 0 0 24>; + + joystick_pins: joystick { + pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; + drive-push-pull; + bias-pull-up; + }; + }; + }; }; &rtc { diff --git a/dts/src/arm/stm32mp157-pinctrl.dtsi b/dts/src/arm/stm32mp157-pinctrl.dtsi index 85c417d998..df64701335 100644 --- a/dts/src/arm/stm32mp157-pinctrl.dtsi +++ b/dts/src/arm/stm32mp157-pinctrl.dtsi @@ -26,6 +26,7 @@ st,bank-name = "GPIOA"; ngpios = <16>; gpio-ranges = <&pinctrl 0 0 16>; + status = "disabled"; }; gpiob: gpio@50003000 { @@ -38,6 +39,7 @@ st,bank-name = "GPIOB"; ngpios = <16>; gpio-ranges = <&pinctrl 0 16 16>; + status = "disabled"; }; gpioc: gpio@50004000 { @@ -50,6 +52,7 @@ st,bank-name = "GPIOC"; ngpios = <16>; gpio-ranges = <&pinctrl 0 32 16>; + status = "disabled"; }; gpiod: gpio@50005000 { @@ -62,6 +65,7 @@ st,bank-name = "GPIOD"; ngpios = <16>; gpio-ranges = <&pinctrl 0 48 16>; + status = "disabled"; }; gpioe: gpio@50006000 { @@ -74,6 +78,7 @@ st,bank-name = "GPIOE"; ngpios = <16>; gpio-ranges = <&pinctrl 0 64 16>; + status = "disabled"; }; gpiof: gpio@50007000 { @@ -86,6 +91,7 @@ st,bank-name = "GPIOF"; ngpios = <16>; gpio-ranges = <&pinctrl 0 80 16>; + status = "disabled"; }; gpiog: gpio@50008000 { @@ -98,6 +104,7 @@ st,bank-name = "GPIOG"; ngpios = <16>; gpio-ranges = <&pinctrl 0 96 16>; + status = "disabled"; }; gpioh: gpio@50009000 { @@ -110,6 +117,7 @@ st,bank-name = "GPIOH"; ngpios = <16>; gpio-ranges = <&pinctrl 0 112 16>; + status = "disabled"; }; gpioi: gpio@5000a000 { @@ -122,6 +130,7 @@ st,bank-name = "GPIOI"; ngpios = <16>; gpio-ranges = <&pinctrl 0 128 16>; + status = "disabled"; }; gpioj: gpio@5000b000 { @@ -134,6 +143,7 @@ st,bank-name = "GPIOJ"; ngpios = <16>; gpio-ranges = <&pinctrl 0 144 16>; + status = "disabled"; }; gpiok: gpio@5000c000 { @@ -146,6 +156,7 @@ st,bank-name = "GPIOK"; ngpios = <8>; gpio-ranges = <&pinctrl 0 160 8>; + status = "disabled"; }; cec_pins_a: cec-0 { @@ -178,6 +189,47 @@ }; }; + dcmi_pins_a: dcmi-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */ + bias-disable; + }; + }; + + dcmi_sleep_pins_a: dcmi-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */ + <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */ + <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */ + <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */ + <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */ + <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */ + <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */ + <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */ + <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */ + <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */ + <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */ + <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */ + }; + }; + ethernet0_rgmii_pins_a: rgmii-0 { pins1 { pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */ @@ -241,6 +293,23 @@ }; }; + i2c1_pins_b: i2c1-2 { + pins { + pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_pins_sleep_b: i2c1-3 { + pins { + pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */ + }; + }; + i2c2_pins_a: i2c2-0 { pins { pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */ @@ -258,6 +327,21 @@ }; }; + i2c2_pins_b1: i2c2-2 { + pins { + pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b1: i2c2-3 { + pins { + pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */ + }; + }; + i2c5_pins_a: i2c5-0 { pins { pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */ @@ -276,6 +360,25 @@ }; }; + i2s2_pins_a: i2s2-0 { + pins { + pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + }; + + i2s2_pins_sleep_a: i2s2-1 { + pins { + pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */ + <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */ + <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */ + }; + }; + ltdc_pins_a: ltdc-a-0 { pins { pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */ @@ -470,6 +573,12 @@ }; }; + qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */ + }; + }; + qspi_bk1_pins_a: qspi-bk1-0 { pins1 { pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ @@ -488,6 +597,16 @@ }; }; + qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */ + <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */ + }; + }; + qspi_bk2_pins_a: qspi-bk2-0 { pins1 { pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */ @@ -506,6 +625,89 @@ }; }; + qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */ + <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */ + <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */ + <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */ + <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */ + }; + }; + + sai2a_pins_a: sai2a-0 { + pins { + pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai2a_sleep_pins_a: sai2a-1 { + pins { + pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */ + <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */ + <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */ + <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */ + }; + }; + + sai2b_pins_a: sai2b-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_a: sai2b-1 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */ + <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */ + <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */ + <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */ + }; + }; + + sai2b_pins_b: sai2b-2 { + pins { + pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */ + bias-disable; + }; + }; + + sai2b_sleep_pins_b: sai2b-3 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */ + }; + }; + + sai4a_pins_a: sai4a-0 { + pins { + pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + sai4a_sleep_pins_a: sai4a-1 { + pins { + pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */ + }; + }; + sdmmc1_b4_pins_a: sdmmc1-b4-0 { pins { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ @@ -599,6 +801,34 @@ bias-disable; }; }; + + uart4_pins_b: uart4-1 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart7_pins_a: uart7-0 { + pins1 { + pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */ + <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */ + <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */ + bias-disable; + }; + }; }; pinctrl_z: pin-controller-z@54004000 { @@ -621,6 +851,22 @@ st,bank-ioport = <11>; ngpios = <8>; gpio-ranges = <&pinctrl_z 0 400 8>; + status = "disabled"; + }; + + i2c2_pins_b2: i2c2-0 { + pins { + pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c2_pins_sleep_b2: i2c2-1 { + pins { + pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */ + }; }; i2c4_pins_a: i2c4-0 { diff --git a/dts/src/arm/stm32mp157a-avenger96.dts b/dts/src/arm/stm32mp157a-avenger96.dts new file mode 100644 index 0000000000..2e4742c53d --- /dev/null +++ b/dts/src/arm/stm32mp157a-avenger96.dts @@ -0,0 +1,321 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +/* + * Copyright (C) Linaro Ltd 2019 - All Rights Reserved + * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + */ + +/dts-v1/; + +#include "stm32mp157c.dtsi" +#include "stm32mp157xac-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/st,stpmic1.h> + +/ { + model = "Arrow Electronics STM32MP157A Avenger96 board"; + compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157"; + + aliases { + ethernet0 = ðernet0; + mmc0 = &sdmmc1; + serial0 = &uart4; + serial1 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x40000000>; + }; + + led { + compatible = "gpio-leds"; + led1 { + label = "green:user1"; + gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led2 { + label = "green:user2"; + gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led3 { + label = "green:user3"; + gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led4 { + label = "green:user3"; + gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + panic-indicator; + }; + + led5 { + label = "yellow:wifi"; + gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led6 { + label = "blue:bt"; + gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; +}; + +ðernet0 { + status = "okay"; + pinctrl-0 = <ðernet0_rgmii_pins_a>; + pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rgmii"; + max-speed = <1000>; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@7 { + reg = <7>; + }; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_b>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_b1 &i2c2_pins_b2>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&exti 55 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + st,main-control-register = <0x04>; + st,vin-control-register = <0xc0>; + st,usb-control-register = <0x30>; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo1-supply = <&v3v3>; + ldo2-supply = <&v3v3>; + ldo3-supply = <&vdd_ddr>; + ldo5-supply = <&v3v3>; + ldo6-supply = <&v3v3>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcore: buck1 { + regulator-name = "vddcore"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { + regulator-name = "vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + st,mask_reset; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + v3v3: buck4 { + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-over-current-protection; + regulator-initial-mode = <0>; + }; + + vdda: ldo1 { + regulator-name = "vdda"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO1 0>; + interrupt-parent = <&pmic>; + }; + + v2v8: ldo2 { + regulator-name = "v2v8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + interrupts = <IT_CURLIM_LDO2 0>; + interrupt-parent = <&pmic>; + }; + + vtt_ddr: ldo3 { + regulator-name = "vtt_ddr"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <750000>; + regulator-always-on; + regulator-over-current-protection; + }; + + vdd_usb: ldo4 { + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + interrupt-parent = <&pmic>; + }; + + vdd_sd: ldo5 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + interrupts = <IT_CURLIM_LDO5 0>; + interrupt-parent = <&pmic>; + regulator-boot-on; + }; + + v1v8: ldo6 { + regulator-name = "v1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO6 0>; + interrupt-parent = <&pmic>; + regulator-enable-ramp-delay = <300000>; + }; + + vref_ddr: vref_ddr { + regulator-name = "vref_ddr"; + regulator-always-on; + regulator-over-current-protection; + }; + + bst_out: boost { + regulator-name = "bst_out"; + interrupts = <IT_OCP_BOOST 0>; + interrupt-parent = <&pmic>; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + interrupt-parent = <&pmic>; + regulator-active-discharge; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + interrupt-parent = <&pmic>; + regulator-active-discharge; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&rng1 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + st,sig-dir; + st,neg-edge; + st,use-ckin; + bus-width = <4>; + vmmc-supply = <&vdd_sd>; + status = "okay"; +}; + +&uart4 { + /* On Low speed expansion header */ + label = "LS-UART1"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_b>; + status = "okay"; +}; + +&uart7 { + /* On Low speed expansion header */ + label = "LS-UART0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; diff --git a/dts/src/arm/stm32mp157a-dk1.dts b/dts/src/arm/stm32mp157a-dk1.dts index 098dbfb06b..f3f0e37aad 100644 --- a/dts/src/arm/stm32mp157a-dk1.dts +++ b/dts/src/arm/stm32mp157a-dk1.dts @@ -7,7 +7,7 @@ /dts-v1/; #include "stm32mp157c.dtsi" -#include "stm32mp157-pinctrl.dtsi" +#include "stm32mp157xac-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> @@ -28,6 +28,17 @@ reg = <0xc0000000 0x20000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpu_reserved: gpu@d4000000 { + reg = <0xd4000000 0x4000000>; + no-map; + }; + }; + led { compatible = "gpio-leds"; blue { @@ -51,7 +62,7 @@ pinctrl-0 = <ðernet0_rgmii_pins_a>; pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; pinctrl-names = "default", "sleep"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; max-speed = <1000>; phy-handle = <&phy0>; @@ -65,6 +76,47 @@ }; }; +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_pins_sleep_a>; + i2c-scl-rising-time-ns = <100>; + i2c-scl-falling-time-ns = <7>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + hdmi-transmitter@39 { + compatible = "sil,sii9022"; + reg = <0x39>; + iovcc-supply = <&v3v3_hdmi>; + cvcc12-supply = <&v1v2_hdmi>; + reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpiog>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <<dc_pins_a>; + pinctrl-1 = <<dc_pins_sleep_a>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sii9022_in: endpoint { + remote-endpoint = <<dc_ep0_out>; + }; + }; + }; + }; +}; &i2c4 { pinctrl-names = "default"; @@ -223,6 +275,20 @@ status = "okay"; }; +<dc { + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + ltdc_ep0_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&sii9022_in>; + }; + }; +}; + &rng1 { status = "okay"; }; diff --git a/dts/src/arm/stm32mp157c-ed1.dts b/dts/src/arm/stm32mp157c-ed1.dts index 62a8c78e7e..4fe7f71a74 100644 --- a/dts/src/arm/stm32mp157c-ed1.dts +++ b/dts/src/arm/stm32mp157c-ed1.dts @@ -6,7 +6,7 @@ /dts-v1/; #include "stm32mp157c.dtsi" -#include "stm32mp157-pinctrl.dtsi" +#include "stm32mp157xaa-pinctrl.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/mfd/st,stpmic1.h> @@ -23,6 +23,17 @@ reg = <0xC0000000 0x40000000>; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpu_reserved: gpu@e8000000 { + reg = <0xe8000000 0x8000000>; + no-map; + }; + }; + aliases { serial0 = &uart4; }; @@ -61,6 +72,11 @@ status = "okay"; }; +&gpu { + contiguous-area = <&gpu_reserved>; + status = "okay"; +}; + &i2c4 { pinctrl-names = "default"; pinctrl-0 = <&i2c4_pins_a>; diff --git a/dts/src/arm/stm32mp157c-ev1.dts b/dts/src/arm/stm32mp157c-ev1.dts index b6aca40b9b..feb8f77272 100644 --- a/dts/src/arm/stm32mp157c-ev1.dts +++ b/dts/src/arm/stm32mp157c-ev1.dts @@ -7,6 +7,7 @@ #include "stm32mp157c-ed1.dts" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "STMicroelectronics STM32MP157C eval daughter on eval mother"; @@ -21,6 +22,51 @@ ethernet0 = ðernet0; }; + clocks { + clk_ext_camera: clk-ext-camera { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + joystick { + compatible = "gpio-keys"; + #size-cells = <0>; + pinctrl-0 = <&joystick_pins>; + pinctrl-names = "default"; + button-0 { + label = "JoySel"; + linux,code = <KEY_ENTER>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + }; + button-1 { + label = "JoyDown"; + linux,code = <KEY_DOWN>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <1 IRQ_TYPE_EDGE_RISING>; + }; + button-2 { + label = "JoyLeft"; + linux,code = <KEY_LEFT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <2 IRQ_TYPE_EDGE_RISING>; + }; + button-3 { + label = "JoyRight"; + linux,code = <KEY_RIGHT>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + }; + button-4 { + label = "JoyUp"; + linux,code = <KEY_UP>; + interrupt-parent = <&stmfx_pinctrl>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + }; + }; + panel_backlight: panel-backlight { compatible = "gpio-backlight"; gpios = <&gpiod 13 GPIO_ACTIVE_LOW>; @@ -35,6 +81,23 @@ status = "okay"; }; +&dcmi { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcmi_pins_a>; + pinctrl-1 = <&dcmi_sleep_pins_a>; + + port { + dcmi_0: endpoint { + remote-endpoint = <&ov5640_0>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; +}; + &dsi { #address-cells = <1>; #size-cells = <0>; @@ -64,6 +127,7 @@ reg = <0>; reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>; backlight = <&panel_backlight>; + power-supply = <&v3v3>; status = "okay"; port { @@ -79,7 +143,7 @@ pinctrl-0 = <ðernet0_rgmii_pins_a>; pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>; pinctrl-names = "default", "sleep"; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; max-speed = <1000>; phy-handle = <&phy0>; @@ -99,6 +163,60 @@ i2c-scl-rising-time-ns = <185>; i2c-scl-falling-time-ns = <20>; status = "okay"; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&ov5640_pins>; + reg = <0x3c>; + clocks = <&clk_ext_camera>; + clock-names = "xclk"; + DOVDD-supply = <&v2v8>; + powerdown-gpios = <&stmfx_pinctrl 18 GPIO_ACTIVE_HIGH>; + reset-gpios = <&stmfx_pinctrl 19 GPIO_ACTIVE_LOW>; + rotation = <180>; + status = "okay"; + + port { + ov5640_0: endpoint { + remote-endpoint = <&dcmi_0>; + bus-width = <8>; + data-shift = <2>; /* lines 9:2 are used */ + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + }; + }; + }; + + stmfx: stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + vdd-supply = <&v3v3>; + + stmfx_pinctrl: stmfx-pin-controller { + compatible = "st,stmfx-0300-pinctrl"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&stmfx_pinctrl 0 0 24>; + + joystick_pins: joystick { + pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; + drive-push-pull; + bias-pull-down; + }; + + ov5640_pins: camera { + pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */ + drive-push-pull; + output-low; + }; + }; + }; }; &i2c5 { @@ -131,14 +249,16 @@ }; &qspi { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a &qspi_bk2_sleep_pins_a>; reg = <0x58003000 0x1000>, <0x70000000 0x4000000>; #address-cells = <1>; #size-cells = <0>; status = "okay"; flash0: mx66l51235l@0 { + compatible = "jedec,spi-nor"; reg = <0>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; @@ -147,6 +267,7 @@ }; flash1: mx66l51235l@1 { + compatible = "jedec,spi-nor"; reg = <1>; spi-rx-bus-width = <4>; spi-max-frequency = <108000000>; diff --git a/dts/src/arm/stm32mp157c.dtsi b/dts/src/arm/stm32mp157c.dtsi index 2afeee65c3..0c4e6ebc35 100644 --- a/dts/src/arm/stm32mp157c.dtsi +++ b/dts/src/arm/stm32mp157c.dtsi @@ -365,6 +365,17 @@ status = "disabled"; }; + i2s2: audio-controller@4000b000 { + compatible = "st,stm32h7-i2s"; + #sound-dai-cells = <0>; + reg = <0x4000b000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 39 0x400 0x01>, + <&dmamux1 40 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + spi3: spi@4000c000 { #address-cells = <1>; #size-cells = <0>; @@ -379,6 +390,17 @@ status = "disabled"; }; + i2s3: audio-controller@4000c000 { + compatible = "st,stm32h7-i2s"; + #sound-dai-cells = <0>; + reg = <0x4000c000 0x400>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 61 0x400 0x01>, + <&dmamux1 62 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + spdifrx: audio-controller@4000d000 { compatible = "st,stm32h7-spdifrx"; #sound-dai-cells = <0>; @@ -607,6 +629,17 @@ status = "disabled"; }; + i2s1: audio-controller@44004000 { + compatible = "st,stm32h7-i2s"; + #sound-dai-cells = <0>; + reg = <0x44004000 0x400>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 37 0x400 0x01>, + <&dmamux1 38 0x400 0x01>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + spi4: spi@44005000 { #address-cells = <1>; #size-cells = <0>; @@ -708,6 +741,100 @@ status = "disabled"; }; + sai1: sai@4400a000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400a000 0x400>; + reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI1_R>; + status = "disabled"; + + sai1a: audio-controller@4400a004 { + #sound-dai-cells = <0>; + + compatible = "st,stm32-sai-sub-a"; + reg = <0x4 0x1c>; + clocks = <&rcc SAI1_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 87 0x400 0x01>; + status = "disabled"; + }; + + sai1b: audio-controller@4400a024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x1c>; + clocks = <&rcc SAI1_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 88 0x400 0x01>; + status = "disabled"; + }; + }; + + sai2: sai@4400b000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400b000 0x400>; + reg = <0x4400b000 0x4>, <0x4400b3f0 0x10>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI2_R>; + status = "disabled"; + + sai2a: audio-controller@4400b004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x4 0x1c>; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 89 0x400 0x01>; + status = "disabled"; + }; + + sai2b: audio-controller@4400b024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x1c>; + clocks = <&rcc SAI2_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 90 0x400 0x01>; + status = "disabled"; + }; + }; + + sai3: sai@4400c000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4400c000 0x400>; + reg = <0x4400c000 0x4>, <0x4400c3f0 0x10>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI3_R>; + status = "disabled"; + + sai3a: audio-controller@4400c004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x04 0x1c>; + clocks = <&rcc SAI3_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 113 0x400 0x01>; + status = "disabled"; + }; + + sai3b: audio-controller@4400c024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x1c>; + clocks = <&rcc SAI3_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 114 0x400 0x01>; + status = "disabled"; + }; + }; + dfsdm: dfsdm@4400d000 { compatible = "st,stm32mp1-dfsdm"; reg = <0x4400d000 0x800>; @@ -914,6 +1041,18 @@ status = "disabled"; }; + dcmi: dcmi@4c006000 { + compatible = "st,stm32-dcmi"; + reg = <0x4c006000 0x400>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc CAMITF_R>; + clocks = <&rcc DCMI>; + clock-names = "mclk"; + dmas = <&dmamux1 75 0x400 0x0d>; + dma-names = "tx"; + status = "disabled"; + }; + rcc: rcc@50000000 { compatible = "st,stm32mp1-rcc", "syscon"; reg = <0x50000000 0x1000>; @@ -1020,6 +1159,37 @@ status = "disabled"; }; + sai4: sai@50027000 { + compatible = "st,stm32h7-sai"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50027000 0x400>; + reg = <0x50027000 0x4>, <0x500273f0 0x10>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + resets = <&rcc SAI4_R>; + status = "disabled"; + + sai4a: audio-controller@50027004 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-a"; + reg = <0x04 0x1c>; + clocks = <&rcc SAI4_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 99 0x400 0x01>; + status = "disabled"; + }; + + sai4b: audio-controller@50027024 { + #sound-dai-cells = <0>; + compatible = "st,stm32-sai-sub-b"; + reg = <0x24 0x1c>; + clocks = <&rcc SAI4_K>; + clock-names = "sai_ck"; + dmas = <&dmamux1 100 0x400 0x01>; + status = "disabled"; + }; + }; + dts: thermal@50028000 { compatible = "st,stm32-thermal"; reg = <0x50028000 0x100>; @@ -1149,6 +1319,16 @@ status = "disabled"; }; + gpu: gpu@59000000 { + compatible = "vivante,gc"; + reg = <0x59000000 0x800>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc GPU>, <&rcc GPU_K>; + clock-names = "bus" ,"core"; + resets = <&rcc GPU_R>; + status = "disabled"; + }; + dsi: dsi@5a000000 { compatible = "st,stm32-dsi"; reg = <0x5a000000 0x800>; diff --git a/dts/src/arm/stm32mp157xaa-pinctrl.dtsi b/dts/src/arm/stm32mp157xaa-pinctrl.dtsi new file mode 100644 index 0000000000..875adf5e1e --- /dev/null +++ b/dts/src/arm/stm32mp157xaa-pinctrl.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> + */ + +#include "stm32mp157-pinctrl.dtsi" +/ { + soc { + pinctrl: pin-controller@50002000 { + st,package = <STM32MP_PKG_AA>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 128 16>; + }; + + gpioj: gpio@5000b000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 144 16>; + }; + + gpiok: gpio@5000c000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl 0 160 8>; + }; + }; + + pinctrl_z: pin-controller-z@54004000 { + st,package = <STM32MP_PKG_AA>; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; + }; + }; +}; diff --git a/dts/src/arm/stm32mp157xab-pinctrl.dtsi b/dts/src/arm/stm32mp157xab-pinctrl.dtsi new file mode 100644 index 0000000000..961fa12a59 --- /dev/null +++ b/dts/src/arm/stm32mp157xab-pinctrl.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> + */ + +#include "stm32mp157-pinctrl.dtsi" +/ { + soc { + pinctrl: pin-controller@50002000 { + st,package = <STM32MP_PKG_AB>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; + }; + }; +}; diff --git a/dts/src/arm/stm32mp157xac-pinctrl.dtsi b/dts/src/arm/stm32mp157xac-pinctrl.dtsi new file mode 100644 index 0000000000..26600f188d --- /dev/null +++ b/dts/src/arm/stm32mp157xac-pinctrl.dtsi @@ -0,0 +1,78 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> + */ + +#include "stm32mp157-pinctrl.dtsi" +/ { + soc { + pinctrl: pin-controller@50002000 { + st,package = <STM32MP_PKG_AC>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 80 16>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 96 16>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 112 16>; + }; + + gpioi: gpio@5000a000 { + status = "okay"; + ngpios = <12>; + gpio-ranges = <&pinctrl 0 128 12>; + }; + }; + + pinctrl_z: pin-controller-z@54004000 { + st,package = <STM32MP_PKG_AC>; + + gpioz: gpio@54004000 { + status = "okay"; + ngpios = <8>; + gpio-ranges = <&pinctrl_z 0 400 8>; + }; + }; + }; +}; diff --git a/dts/src/arm/stm32mp157xad-pinctrl.dtsi b/dts/src/arm/stm32mp157xad-pinctrl.dtsi new file mode 100644 index 0000000000..910113f3e6 --- /dev/null +++ b/dts/src/arm/stm32mp157xad-pinctrl.dtsi @@ -0,0 +1,62 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) STMicroelectronics 2019 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@st.com> + */ + +#include "stm32mp157-pinctrl.dtsi" +/ { + soc { + pinctrl: pin-controller@50002000 { + st,package = <STM32MP_PKG_AD>; + + gpioa: gpio@50002000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 0 16>; + }; + + gpiob: gpio@50003000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 16 16>; + }; + + gpioc: gpio@50004000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 32 16>; + }; + + gpiod: gpio@50005000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 48 16>; + }; + + gpioe: gpio@50006000 { + status = "okay"; + ngpios = <16>; + gpio-ranges = <&pinctrl 0 64 16>; + }; + + gpiof: gpio@50007000 { + status = "okay"; + ngpios = <6>; + gpio-ranges = <&pinctrl 6 86 6>; + }; + + gpiog: gpio@50008000 { + status = "okay"; + ngpios = <10>; + gpio-ranges = <&pinctrl 6 102 10>; + }; + + gpioh: gpio@50009000 { + status = "okay"; + ngpios = <2>; + gpio-ranges = <&pinctrl 0 112 2>; + }; + }; + }; +}; diff --git a/dts/src/arm/sun5i-gr8-evb.dts b/dts/src/arm/sun5i-gr8-evb.dts index d003b895a6..4c20d731a9 100644 --- a/dts/src/arm/sun5i-gr8-evb.dts +++ b/dts/src/arm/sun5i-gr8-evb.dts @@ -150,7 +150,7 @@ }; pcf8563: rtc@51 { - compatible = "phg,pcf8563"; + compatible = "nxp,pcf8563"; reg = <0x51>; }; }; diff --git a/dts/src/arm/sun6i-a31.dtsi b/dts/src/arm/sun6i-a31.dtsi index c04efad81b..dcddc33924 100644 --- a/dts/src/arm/sun6i-a31.dtsi +++ b/dts/src/arm/sun6i-a31.dtsi @@ -216,6 +216,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; @@ -223,7 +224,8 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-accuracy = <50000>; + clock-output-names = "ext_osc32k"; }; /* @@ -588,7 +590,7 @@ ccu: clock@1c20000 { compatible = "allwinner,sun6i-a31-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; @@ -601,7 +603,7 @@ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -987,6 +989,8 @@ dma-names = "rx", "tx"; resets = <&ccu RST_AHB1_SPI0>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; spi1: spi@1c69000 { @@ -999,6 +1003,8 @@ dma-names = "rx", "tx"; resets = <&ccu RST_AHB1_SPI1>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; spi2: spi@1c6a000 { @@ -1011,6 +1017,8 @@ dma-names = "rx", "tx"; resets = <&ccu RST_AHB1_SPI2>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; spi3: spi@1c6b000 { @@ -1023,6 +1031,8 @@ dma-names = "rx", "tx"; resets = <&ccu RST_AHB1_SPI3>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; gic: interrupt-controller@1c81000 { @@ -1279,10 +1289,13 @@ }; rtc: rtc@1f00000 { + #clock-cells = <1>; compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc32k>; + clock-output-names = "osc32k"; }; nmi_intc: interrupt-controller@1f00c00 { @@ -1300,7 +1313,7 @@ ar100: ar100_clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, + clocks = <&rtc 0>, <&osc24M>, <&ccu CLK_PLL_PERIPH>, <&ccu CLK_PLL_PERIPH>; clock-output-names = "ar100"; @@ -1335,7 +1348,7 @@ ir_clk: ir_clk { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; - clocks = <&osc32k>, <&osc24M>; + clocks = <&rtc 0>, <&osc24M>; clock-output-names = "ir"; }; @@ -1365,7 +1378,7 @@ reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; + clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; resets = <&apb0_rst 0>; gpio-controller; diff --git a/dts/src/arm/sun7i-a20-icnova-swac.dts b/dts/src/arm/sun7i-a20-icnova-swac.dts index 949494730a..7449aac3f4 100644 --- a/dts/src/arm/sun7i-a20-icnova-swac.dts +++ b/dts/src/arm/sun7i-a20-icnova-swac.dts @@ -49,7 +49,8 @@ / { model = "ICnova-A20 SWAC"; - compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20"; + compatible = "incircuit,icnova-a20-swac", "incircuit,icnova-a20", + "allwinner,sun7i-a20"; aliases { serial0 = &uart0; diff --git a/dts/src/arm/sun7i-a20-olinuxino-lime2.dts b/dts/src/arm/sun7i-a20-olinuxino-lime2.dts index 95c6f89490..56f451c07f 100644 --- a/dts/src/arm/sun7i-a20-olinuxino-lime2.dts +++ b/dts/src/arm/sun7i-a20-olinuxino-lime2.dts @@ -194,6 +194,14 @@ #include "axp209.dtsi" +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; diff --git a/dts/src/arm/sun8i-a83t-tbs-a711.dts b/dts/src/arm/sun8i-a83t-tbs-a711.dts index 66d078053d..568b90ece3 100644 --- a/dts/src/arm/sun8i-a83t-tbs-a711.dts +++ b/dts/src/arm/sun8i-a83t-tbs-a711.dts @@ -224,14 +224,14 @@ vref-supply = <®_aldo2>; status = "okay"; - button@210 { + button-210 { label = "Volume Up"; linux,code = <KEY_VOLUMEUP>; channel = <0>; voltage = <210000>; }; - button@410 { + button-410 { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; channel = <0>; diff --git a/dts/src/arm/sun8i-a83t.dtsi b/dts/src/arm/sun8i-a83t.dtsi index 392b0cabbf..ada6d08bc5 100644 --- a/dts/src/arm/sun8i-a83t.dtsi +++ b/dts/src/arm/sun8i-a83t.dtsi @@ -679,6 +679,20 @@ #interrupt-cells = <3>; #gpio-cells = <3>; + /omit-if-no-ref/ + csi_8bit_parallel_pins: csi-8bit-parallel-pins { + pins = "PE0", "PE2", "PE3", "PE6", "PE7", + "PE8", "PE9", "PE10", "PE11", + "PE12", "PE13"; + function = "csi"; + }; + + /omit-if-no-ref/ + csi_mclk_pin: csi-mclk-pin { + pins = "PE1"; + function = "csi"; + }; + emac_rgmii_pins: emac-rgmii-pins { pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD11", "PD12", "PD13", "PD14", "PD18", @@ -997,6 +1011,21 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; }; + csi: camera@1cb0000 { + compatible = "allwinner,sun8i-a83t-csi"; + reg = <0x01cb0000 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + status = "disabled"; + + csi_in: port { + }; + }; + hdmi: hdmi@1ee0000 { compatible = "allwinner,sun8i-a83t-dw-hdmi"; reg = <0x01ee0000 0x10000>; diff --git a/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts b/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts index 78a37a4718..d277d04303 100644 --- a/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts +++ b/dts/src/arm/sun8i-h2-plus-bananapi-m2-zero.dts @@ -59,8 +59,7 @@ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ enable-active-high; gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; wifi_pwrseq: wifi_pwrseq { diff --git a/dts/src/arm/sun8i-h2-plus-orangepi-zero.dts b/dts/src/arm/sun8i-h2-plus-orangepi-zero.dts index 4970eda287..f19ed981da 100644 --- a/dts/src/arm/sun8i-h2-plus-orangepi-zero.dts +++ b/dts/src/arm/sun8i-h2-plus-orangepi-zero.dts @@ -102,8 +102,7 @@ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ enable-active-high; gpios-states = <1>; - states = <1100000 0 - 1300000 1>; + states = <1100000 0>, <1300000 1>; }; wifi_pwrseq: wifi_pwrseq { diff --git a/dts/src/arm/sun8i-h3-beelink-x2.dts b/dts/src/arm/sun8i-h3-beelink-x2.dts index 6277f13f3e..ac9e26b1d9 100644 --- a/dts/src/arm/sun8i-h3-beelink-x2.dts +++ b/dts/src/arm/sun8i-h3-beelink-x2.dts @@ -90,6 +90,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; sound_spdif { @@ -155,6 +157,8 @@ &mmc1 { vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; status = "okay"; diff --git a/dts/src/arm/sun8i-h3-orangepi-one.dts b/dts/src/arm/sun8i-h3-orangepi-one.dts index 840849169b..4759ba3f29 100644 --- a/dts/src/arm/sun8i-h3-orangepi-one.dts +++ b/dts/src/arm/sun8i-h3-orangepi-one.dts @@ -109,8 +109,7 @@ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ enable-active-high; gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; }; diff --git a/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts b/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts index c488aaacbd..42d62d1ba1 100644 --- a/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts +++ b/dts/src/arm/sun8i-r40-bananapi-m2-ultra.dts @@ -201,10 +201,15 @@ &pio { pinctrl-names = "default"; pinctrl-0 = <&clk_out_a_pin>; + vcc-pa-supply = <®_aldo2>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_eldo1>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_dldo1>; }; ®_aldo2 { - regulator-always-on; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-name = "vcc-pa"; diff --git a/dts/src/arm/sun8i-r40.dtsi b/dts/src/arm/sun8i-r40.dtsi index bb856e53b8..6007d0cc25 100644 --- a/dts/src/arm/sun8i-r40.dtsi +++ b/dts/src/arm/sun8i-r40.dtsi @@ -318,8 +318,7 @@ }; rtc: rtc@1c20400 { - compatible = "allwinner,sun8i-r40-rtc", - "allwinner,sun8i-h3-rtc"; + compatible = "allwinner,sun8i-r40-rtc"; reg = <0x01c20400 0x400>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; clock-output-names = "osc32k", "osc32k-out"; diff --git a/dts/src/arm/sun8i-v3s.dtsi b/dts/src/arm/sun8i-v3s.dtsi index df72b1719c..d7aef128ac 100644 --- a/dts/src/arm/sun8i-v3s.dtsi +++ b/dts/src/arm/sun8i-v3s.dtsi @@ -84,6 +84,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; }; @@ -91,7 +92,8 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-accuracy = <50000>; + clock-output-names = "ext-osc32k"; }; }; @@ -264,17 +266,20 @@ ccu: clock@1c20000 { compatible = "allwinner,sun8i-v3s-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; }; rtc: rtc@1c20400 { - compatible = "allwinner,sun6i-a31-rtc"; + #clock-cells = <1>; + compatible = "allwinner,sun8i-v3-rtc"; reg = <0x01c20400 0x54>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc32k>; + clock-output-names = "osc32k", "osc32k-out"; }; pio: pinctrl@1c20800 { @@ -282,7 +287,7 @@ reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; diff --git a/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts b/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts index f05cabd34b..15c22b06fc 100644 --- a/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts +++ b/dts/src/arm/sun8i-v40-bananapi-m2-berry.dts @@ -50,6 +50,7 @@ compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40"; aliases { + ethernet0 = &gmac; serial0 = &uart0; }; @@ -57,6 +58,17 @@ stdout-path = "serial0:115200n8"; }; + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -84,14 +96,52 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */ + clocks = <&ccu CLK_OUTA>; + clock-names = "ext_clock"; }; }; +&ahci { + ahci-supply = <®_dldo4>; + phy-supply = <®_eldo3>; + status = "okay"; +}; + +&de { + status = "okay"; +}; + &ehci1 { /* Terminus Tech FE 1.1s 4-port USB 2.0 hub here */ status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_rgmii_pins>; + phy-handle = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_dc1sw>; + status = "okay"; +}; + +&gmac_mdio { + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &i2c0 { status = "okay"; @@ -123,6 +173,23 @@ status = "okay"; }; +&pio { + pinctrl-names = "default"; + pinctrl-0 = <&clk_out_a_pin>; + vcc-pa-supply = <®_aldo2>; + vcc-pc-supply = <®_dcdc1>; + vcc-pd-supply = <®_dcdc1>; + vcc-pe-supply = <®_eldo1>; + vcc-pf-supply = <®_dcdc1>; + vcc-pg-supply = <®_dldo1>; +}; + +®_aldo2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pa"; +}; + ®_aldo3 { regulator-always-on; regulator-min-microvolt = <2700000>; @@ -130,6 +197,12 @@ regulator-name = "avcc"; }; +®_dc1sw { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-gmac-phy"; +}; + ®_dcdc1 { regulator-always-on; regulator-min-microvolt = <3000000>; @@ -164,18 +237,68 @@ regulator-name = "vcc-wifi-io"; }; +/* + * Our WiFi chip needs both DLDO2 and DLDO3 to be powered at the same + * time, with the two being in sync, to be able to meet maximum power + * consumption during transmits. Since this is not really supported + * right now, just use the two as always on, and we will fix it later. + */ + ®_dldo2 { + regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-wifi"; }; +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; +}; + +®_dldo4 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vdd2v5-sata"; +}; + +®_eldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd1v2-sata"; +}; + +&tcon_tv0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; status = "okay"; }; +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pg_pins>, <&uart3_rts_cts_pg_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&ccu CLK_OUTA>; + clock-names = "lpo"; + vbat-supply = <®_dldo2>; + vddio-supply = <®_dldo1>; + device-wakeup-gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + /* TODO host wake line connected to PMIC GPIO pins */ + shutdown-gpios = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ + max-speed = <1500000>; + }; +}; + &usbphy { usb1_vbus-supply = <®_vcc5v0>; status = "okay"; diff --git a/dts/src/arm/sunxi-bananapi-m2-plus-v1.2.dtsi b/dts/src/arm/sunxi-bananapi-m2-plus-v1.2.dtsi index 53edd1faee..22466afd38 100644 --- a/dts/src/arm/sunxi-bananapi-m2-plus-v1.2.dtsi +++ b/dts/src/arm/sunxi-bananapi-m2-plus-v1.2.dtsi @@ -21,8 +21,7 @@ regulator-ramp-delay = <50>; /* 4ms */ gpios = <&r_pio 0 1 GPIO_ACTIVE_HIGH>; /* PL1 */ gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; }; diff --git a/dts/src/arm/uniphier-ld4-ref.dts b/dts/src/arm/uniphier-ld4-ref.dts index 3aaca10f66..f2d060f403 100644 --- a/dts/src/arm/uniphier-ld4-ref.dts +++ b/dts/src/arm/uniphier-ld4-ref.dts @@ -77,4 +77,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/dts/src/arm/uniphier-ld4.dtsi b/dts/src/arm/uniphier-ld4.dtsi index c2706cef0b..58cd4e8fa5 100644 --- a/dts/src/arm/uniphier-ld4.dtsi +++ b/dts/src/arm/uniphier-ld4.dtsi @@ -403,9 +403,11 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand2cs>; + pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; diff --git a/dts/src/arm/uniphier-ld6b-ref.dts b/dts/src/arm/uniphier-ld6b-ref.dts index 3d9080ee7a..60994b6e8b 100644 --- a/dts/src/arm/uniphier-ld6b-ref.dts +++ b/dts/src/arm/uniphier-ld6b-ref.dts @@ -90,4 +90,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/dts/src/arm/uniphier-pro4-ref.dts b/dts/src/arm/uniphier-pro4-ref.dts index 28038b17bb..854f2eba3e 100644 --- a/dts/src/arm/uniphier-pro4-ref.dts +++ b/dts/src/arm/uniphier-pro4-ref.dts @@ -98,4 +98,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/dts/src/arm/uniphier-pro4.dtsi b/dts/src/arm/uniphier-pro4.dtsi index 97d051ef49..7f64e5a616 100644 --- a/dts/src/arm/uniphier-pro4.dtsi +++ b/dts/src/arm/uniphier-pro4.dtsi @@ -593,6 +593,8 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; diff --git a/dts/src/arm/uniphier-pro5.dtsi b/dts/src/arm/uniphier-pro5.dtsi index 3657387394..eff74717b3 100644 --- a/dts/src/arm/uniphier-pro5.dtsi +++ b/dts/src/arm/uniphier-pro5.dtsi @@ -458,9 +458,11 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand2cs>; + pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; diff --git a/dts/src/arm/uniphier-pxs2.dtsi b/dts/src/arm/uniphier-pxs2.dtsi index 06a049f6ed..4eddbb8d7f 100644 --- a/dts/src/arm/uniphier-pxs2.dtsi +++ b/dts/src/arm/uniphier-pxs2.dtsi @@ -766,9 +766,11 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand2cs>; + pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; diff --git a/dts/src/arm/uniphier-sld8-ref.dts b/dts/src/arm/uniphier-sld8-ref.dts index 01bf94c6b9..cf9ea0b150 100644 --- a/dts/src/arm/uniphier-sld8-ref.dts +++ b/dts/src/arm/uniphier-sld8-ref.dts @@ -81,4 +81,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/dts/src/arm/uniphier-sld8.dtsi b/dts/src/arm/uniphier-sld8.dtsi index efce02768b..cbebb6e4c6 100644 --- a/dts/src/arm/uniphier-sld8.dtsi +++ b/dts/src/arm/uniphier-sld8.dtsi @@ -407,9 +407,11 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand2cs>; + pinctrl-0 = <&pinctrl_nand>; clock-names = "nand", "nand_x", "ecc"; clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>; resets = <&sys_rst 2>; diff --git a/dts/src/arm/versatile-ab.dts b/dts/src/arm/versatile-ab.dts index 269e6bf99c..37bd41ff8d 100644 --- a/dts/src/arm/versatile-ab.dts +++ b/dts/src/arm/versatile-ab.dts @@ -161,6 +161,9 @@ compatible = "arm,versatile-flash", "cfi-flash"; reg = <0x34000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; i2c0: i2c@10002000 { diff --git a/dts/src/arm/vexpress-v2m-rs1.dtsi b/dts/src/arm/vexpress-v2m-rs1.dtsi index d3963e9eaf..d6a1fc2692 100644 --- a/dts/src/arm/vexpress-v2m-rs1.dtsi +++ b/dts/src/arm/vexpress-v2m-rs1.dtsi @@ -30,11 +30,14 @@ #interrupt-cells = <1>; ranges; - flash@0,00000000 { + nor_flash: flash@0,00000000 { compatible = "arm,vexpress-flash", "cfi-flash"; reg = <0 0x00000000 0x04000000>, <4 0x00000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; psram@1,00000000 { diff --git a/dts/src/arm/vexpress-v2m.dtsi b/dts/src/arm/vexpress-v2m.dtsi index 798c97aff7..8e57e15307 100644 --- a/dts/src/arm/vexpress-v2m.dtsi +++ b/dts/src/arm/vexpress-v2m.dtsi @@ -35,6 +35,9 @@ reg = <0 0x00000000 0x04000000>, <1 0x00000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; psram@2,00000000 { diff --git a/dts/src/arm/vexpress-v2p-ca15_a7.dts b/dts/src/arm/vexpress-v2p-ca15_a7.dts index 00cd9f5bef..1de0a658ad 100644 --- a/dts/src/arm/vexpress-v2p-ca15_a7.dts +++ b/dts/src/arm/vexpress-v2p-ca15_a7.dts @@ -440,7 +440,7 @@ /* non-configurable replicators don't show up on the * AMBA bus. As such no need to add "arm,primecell". */ - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; out-ports { #address-cells = <1>; @@ -471,7 +471,7 @@ }; funnel@20040000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x20040000 0 0x1000>; clocks = <&oscclk6a>; @@ -680,3 +680,12 @@ <0 3 &gic 0 39 4>; }; }; + +&nor_flash { + /* + * Unfortunately, accessing the flash disturbs the CPU idle states + * (suspend) and CPU hotplug of this platform. For this reason, flash + * hardware access is disabled by default on this platform alone. + */ + status = "disabled"; +}; diff --git a/dts/src/arm/vf610-zii-dev.dtsi b/dts/src/arm/vf610-zii-dev.dtsi index 0507e6dcbb..a1b4ccee2a 100644 --- a/dts/src/arm/vf610-zii-dev.dtsi +++ b/dts/src/arm/vf610-zii-dev.dtsi @@ -177,6 +177,36 @@ status = "okay"; }; +&qspi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qspi0>; + status = "okay"; + + /* + * Attached MT25QL02 can go up to 90Mhz in DTR and 166 in STR + * modes, so, spi-max-frequency is limited to 90MHz + */ + flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <90000000>; + spi-rx-bus-width = <4>; + reg = <0>; + m25p,fast-read; + }; + + flash@2 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <90000000>; + spi-rx-bus-width = <4>; + reg = <2>; + m25p,fast-read; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -360,12 +390,18 @@ pinctrl_qspi0: qspi0grp { fsl,pins = < - VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 - VF610_PAD_PTD8__QSPI0_B_CS0 0x31ff - VF610_PAD_PTD9__QSPI0_B_DATA3 0x31c3 - VF610_PAD_PTD10__QSPI0_B_DATA2 0x31c3 - VF610_PAD_PTD11__QSPI0_B_DATA1 0x31c3 - VF610_PAD_PTD12__QSPI0_B_DATA0 0x31c3 + VF610_PAD_PTD0__QSPI0_A_QSCK 0x38c2 + VF610_PAD_PTD1__QSPI0_A_CS0 0x38c2 + VF610_PAD_PTD2__QSPI0_A_DATA3 0x38c3 + VF610_PAD_PTD3__QSPI0_A_DATA2 0x38c3 + VF610_PAD_PTD4__QSPI0_A_DATA1 0x38c3 + VF610_PAD_PTD5__QSPI0_A_DATA0 0x38c3 + VF610_PAD_PTD7__QSPI0_B_QSCK 0x38c2 + VF610_PAD_PTD8__QSPI0_B_CS0 0x38c2 + VF610_PAD_PTD9__QSPI0_B_DATA3 0x38c3 + VF610_PAD_PTD10__QSPI0_B_DATA2 0x38c3 + VF610_PAD_PTD11__QSPI0_B_DATA1 0x38c3 + VF610_PAD_PTD12__QSPI0_B_DATA0 0x38c3 >; }; @@ -385,8 +421,8 @@ pinctrl_uart2: uart2grp { fsl,pins = < - VF610_PAD_PTD0__UART2_TX 0x21a2 - VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD23__UART2_TX 0x21a2 + VF610_PAD_PTD22__UART2_RX 0x21a1 >; }; diff --git a/dts/src/arm64/allwinner/axp803.dtsi b/dts/src/arm64/allwinner/axp803.dtsi index c3a618e127..f0349ef4bf 100644 --- a/dts/src/arm64/allwinner/axp803.dtsi +++ b/dts/src/arm64/allwinner/axp803.dtsi @@ -185,4 +185,10 @@ status = "disabled"; }; }; + + usb_power_supply: usb-power-supply { + compatible = "x-powers,axp803-usb-power-supply", + "x-powers,axp813-usb-power-supply"; + status = "disabled"; + }; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts b/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts index 019ae09ea0..5634245d11 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-amarula-relic.dts @@ -85,8 +85,6 @@ }; &i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; status = "okay"; sensor@48 { @@ -99,6 +97,22 @@ bias-pull-up; }; +&i2c1 { + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt5663"; + reg = <0x5d>; + AVDD28-supply = <®_ldo_io0>; /* VCC-CTP: GPIO0-LDO */ + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>; + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* CTP-INT: PH4 */ + reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* CTP-RST: PH8 */ + touchscreen-inverted-x; + touchscreen-inverted-y; + }; +}; + &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; @@ -262,6 +276,13 @@ regulator-name = "vdd-cpus"; }; +®_ldo_io0 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-ctp"; + status = "okay"; +}; + ®_rtc_ldo { regulator-name = "vcc-rtc"; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts b/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts index 0a56c0c23b..208373efee 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-bananapi-m64.dts @@ -145,8 +145,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; status = "okay"; }; @@ -394,8 +392,13 @@ status = "okay"; }; +&usb_power_supply { + status = "okay"; +}; + &usbphy { usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; status = "okay"; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts b/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts index f4e78531f6..9b9d915712 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-nanopi-a64.dts @@ -120,12 +120,6 @@ }; /* i2c1 connected with gpio headers like pine64, bananapi */ -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "disabled"; -}; - &i2c1_pins { bias-pull-up; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/dts/src/arm64/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts index 6a2154525d..787ebd805a 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts @@ -37,6 +37,22 @@ status = "okay"; }; +&i2c0 { + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + AVDD28-supply = <®_ldo_io0>; /* VDD_CTP: GPIO0-LDO */ + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>; + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* CTP-INT: PH4 */ + reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* CTP-RST: PH11 */ + touchscreen-inverted-x; + touchscreen-inverted-y; + }; +}; + &mdio { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -52,6 +68,13 @@ regulator-name = "vcc-phy"; }; +®_ldo_io0 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vdd-ctp"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts b/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts index 510f661229..5ef3c62c76 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-orangepi-win.dts @@ -109,6 +109,8 @@ wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ + clocks = <&rtc 1>; + clock-names = "ext_clock"; }; }; @@ -170,6 +172,14 @@ bus-width = <4>; non-removable; status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */ + interrupt-names = "host-wake"; + }; }; &ohci0 { @@ -342,7 +352,20 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + max-speed = <1500000>; + clocks = <&rtc 1>; + clock-names = "lpo"; + vbat-supply = <®_dldo2>; + vddio-supply = <®_dldo4>; + device-wakeup-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + }; }; /* On Pi-2 connector, RTS/CTS optional */ diff --git a/dts/src/arm64/allwinner/sun50i-a64-pine64.dts b/dts/src/arm64/allwinner/sun50i-a64-pine64.dts index b7ac6374b1..409523cb09 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-pine64.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-pine64.dts @@ -122,8 +122,6 @@ }; &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; status = "okay"; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts b/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts index 0ec46b969a..1069e7012c 100644 --- a/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts +++ b/dts/src/arm64/allwinner/sun50i-a64-teres-i.dts @@ -79,6 +79,25 @@ compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ }; + + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&r_pio 0 12 GPIO_ACTIVE_HIGH>; /* PL12 */ + sound-name-prefix = "Speaker Amp"; + }; +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <®_eldo1>; + status = "okay"; +}; + +&dai { + status = "okay"; }; &ehci1 { @@ -92,8 +111,6 @@ */ &i2c0 { clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; status = "okay"; }; @@ -279,6 +296,29 @@ vcc-hdmi-supply = <®_dldo1>; }; +&sound { + simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; + simple-audio-card,widgets = "Headphone", "Headphone Jack", + "Microphone", "Headset Microphone", + "Microphone", "Internal Microphone", + "Speaker", "Internal Speaker"; + simple-audio-card,routing = + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right", + "AIF1 Slot 0 Left ADC", "Left ADC", + "AIF1 Slot 0 Right ADC", "Right ADC", + "Headphone Jack", "HP", + "Speaker Amp INL", "LINEOUT", + "Speaker Amp INR", "LINEOUT", + "Internal Speaker", "Speaker Amp OUTL", + "Internal Speaker", "Speaker Amp OUTR", + "Internal Microphone", "MBIAS", + "MIC1", "Internal Microphone", + "Headset Microphone", "HBIAS", + "MIC2", "Headset Microphone"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; diff --git a/dts/src/arm64/allwinner/sun50i-a64.dtsi b/dts/src/arm64/allwinner/sun50i-a64.dtsi index 8c5b521e63..9cc9bdde81 100644 --- a/dts/src/arm64/allwinner/sun50i-a64.dtsi +++ b/dts/src/arm64/allwinner/sun50i-a64.dtsi @@ -611,6 +611,16 @@ function = "i2c1"; }; + /omit-if-no-ref/ + lcd_rgb666_pins: lcd-rgb666-pins { + pins = "PD0", "PD1", "PD2", "PD3", "PD4", + "PD5", "PD6", "PD7", "PD8", "PD9", + "PD10", "PD11", "PD12", "PD13", + "PD14", "PD15", "PD16", "PD17", + "PD18", "PD19", "PD20", "PD21"; + function = "lcd0"; + }; + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -730,6 +740,14 @@ status = "disabled"; }; + lradc: lradc@1c21800 { + compatible = "allwinner,sun50i-a64-lradc", + "allwinner,sun8i-a83t-r-lradc"; + reg = <0x01c21800 0x400>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + i2s0: i2s@1c22000 { #sound-dai-cells = <0>; compatible = "allwinner,sun50i-a64-i2s", @@ -842,6 +860,8 @@ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C0>; resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -853,6 +873,8 @@ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ccu CLK_BUS_I2C1>; resets = <&ccu RST_BUS_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts b/dts/src/arm64/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts index 62409afbaf..c924090331 100644 --- a/dts/src/arm64/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts +++ b/dts/src/arm64/allwinner/sun50i-h5-emlid-neutis-n5-devboard.dts @@ -55,8 +55,7 @@ regulator-ramp-delay = <50>; /* 4ms */ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; }; diff --git a/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts b/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts index 9887948d5c..1c7dde84e5 100644 --- a/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts +++ b/dts/src/arm64/allwinner/sun50i-h5-nanopi-neo-plus2.dts @@ -104,8 +104,7 @@ regulator-ramp-delay = <50>; /* 4ms */ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; gpios-states = <0x1>; - states = <1100000 0x0 - 1300000 0x1>; + states = <1100000 0>, <1300000 1>; }; wifi_pwrseq: wifi_pwrseq { diff --git a/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts b/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts index 4802902e12..1898345183 100644 --- a/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts +++ b/dts/src/arm64/allwinner/sun50i-h6-pine-h64.dts @@ -127,6 +127,12 @@ status = "okay"; }; +&pio { + vcc-pc-supply = <®_bldo2>; + vcc-pd-supply = <®_cldo1>; + vcc-pg-supply = <®_aldo1>; +}; + &r_i2c { status = "okay"; @@ -243,10 +249,16 @@ pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; #clock-cells = <0>; }; }; +&r_pio { + vcc-pm-supply = <®_aldo1>; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_ph_pins>; diff --git a/dts/src/arm64/allwinner/sun50i-h6.dtsi b/dts/src/arm64/allwinner/sun50i-h6.dtsi index 16c5c3d0fd..7628a7c830 100644 --- a/dts/src/arm64/allwinner/sun50i-h6.dtsi +++ b/dts/src/arm64/allwinner/sun50i-h6.dtsi @@ -203,11 +203,32 @@ #reset-cells = <1>; }; + dma: dma-controller@3002000 { + compatible = "allwinner,sun50i-h6-dma"; + reg = <0x03002000 0x1000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>; + clock-names = "bus", "mbus"; + dma-channels = <16>; + dma-requests = <46>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + sid: sid@3006000 { compatible = "allwinner,sun50i-h6-sid"; reg = <0x03006000 0x400>; }; + watchdog: watchdog@30090a0 { + compatible = "allwinner,sun50i-h6-wdt", + "allwinner,sun6i-a31-wdt"; + reg = <0x030090a0 0x20>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + /* Broken on some H6 boards */ + status = "disabled"; + }; + pio: pinctrl@300b000 { compatible = "allwinner,sun50i-h6-pinctrl"; reg = <0x0300b000 0x400>; @@ -622,6 +643,13 @@ #reset-cells = <1>; }; + r_watchdog: watchdog@7020400 { + compatible = "allwinner,sun50i-h6-wdt", + "allwinner,sun6i-a31-wdt"; + reg = <0x07020400 0x20>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + }; + r_intc: interrupt-controller@7021000 { compatible = "allwinner,sun50i-h6-r-intc", "allwinner,sun6i-a31-r-intc"; diff --git a/dts/src/arm64/altera/socfpga_stratix10.dtsi b/dts/src/arm64/altera/socfpga_stratix10.dtsi index 470dcfd9de..b05d78164f 100644 --- a/dts/src/arm64/altera/socfpga_stratix10.dtsi +++ b/dts/src/arm64/altera/socfpga_stratix10.dtsi @@ -138,7 +138,7 @@ }; gmac0: ethernet@ff800000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff800000 0x2000>; interrupts = <0 90 4>; interrupt-names = "macirq"; @@ -156,7 +156,7 @@ }; gmac1: ethernet@ff802000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff802000 0x2000>; interrupts = <0 91 4>; interrupt-names = "macirq"; @@ -169,12 +169,12 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 2>; - altr,sysmgr-syscon = <&sysmgr 0x48 0>; + altr,sysmgr-syscon = <&sysmgr 0x48 8>; status = "disabled"; }; gmac2: ethernet@ff804000 { - compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + compatible = "altr,socfpga-stmmac-a10-s10", "snps,dwmac-3.74a", "snps,dwmac"; reg = <0xff804000 0x2000>; interrupts = <0 92 4>; interrupt-names = "macirq"; @@ -187,7 +187,7 @@ rx-fifo-depth = <16384>; snps,multicast-filter-bins = <256>; iommus = <&smmu 3>; - altr,sysmgr-syscon = <&sysmgr 0x4c 0>; + altr,sysmgr-syscon = <&sysmgr 0x4c 16>; status = "disabled"; }; @@ -539,6 +539,14 @@ interrupts = <16 4>; }; + ocram-ecc@ff8cc000 { + compatible = "altr,socfpga-s10-ocram-ecc", + "altr,socfpga-a10-ocram-ecc"; + reg = <0xff8cc000 0x100>; + altr,ecc-parent = <&ocram>; + interrupts = <1 4>; + }; + usb0-ecc@ff8c4000 { compatible = "altr,socfpga-s10-usb-ecc", "altr,socfpga-usb-ecc"; diff --git a/dts/src/arm64/altera/socfpga_stratix10_socdk.dts b/dts/src/arm64/altera/socfpga_stratix10_socdk.dts index 84f9f5902e..66e4ffb4e9 100644 --- a/dts/src/arm64/altera/socfpga_stratix10_socdk.dts +++ b/dts/src/arm64/altera/socfpga_stratix10_socdk.dts @@ -56,6 +56,17 @@ clock-frequency = <25000000>; }; }; + + eccmgr { + sdmmca-ecc@ff8c8c00 { + compatible = "altr,socfpga-s10-sdmmc-ecc", + "altr,socfpga-sdmmc-ecc"; + reg = <0xff8c8c00 0x100>; + altr,ecc-parent = <&mmc>; + interrupts = <14 4>, + <15 4>; + }; + }; }; }; diff --git a/dts/src/arm64/amlogic/meson-axg-s400.dts b/dts/src/arm64/amlogic/meson-axg-s400.dts index 75fe1a2c49..4cd2d59518 100644 --- a/dts/src/arm64/amlogic/meson-axg-s400.dts +++ b/dts/src/arm64/amlogic/meson-axg-s400.dts @@ -482,8 +482,8 @@ /* emmc storage */ &sd_emmc_c { - status = "disabled"; - pinctrl-0 = <&emmc_pins>; + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; pinctrl-1 = <&emmc_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; diff --git a/dts/src/arm64/amlogic/meson-axg.dtsi b/dts/src/arm64/amlogic/meson-axg.dtsi index 34704fecf7..6219337033 100644 --- a/dts/src/arm64/amlogic/meson-axg.dtsi +++ b/dts/src/arm64/amlogic/meson-axg.dtsi @@ -171,7 +171,9 @@ ranges; ethmac: ethernet@ff3f0000 { - compatible = "amlogic,meson-axg-dwmac", "snps,dwmac"; + compatible = "amlogic,meson-axg-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; reg = <0x0 0xff3f0000 0x0 0x10000 0x0 0xff634540 0x0 0x8>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; @@ -299,7 +301,7 @@ }; emmc_pins: emmc { - mux { + mux-0 { groups = "emmc_nand_d0", "emmc_nand_d1", "emmc_nand_d2", @@ -308,14 +310,26 @@ "emmc_nand_d5", "emmc_nand_d6", "emmc_nand_d7", - "emmc_clk", - "emmc_cmd", - "emmc_ds"; + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + }; + + mux-1 { + groups = "emmc_clk"; function = "emmc"; bias-disable; }; }; + emmc_ds_pins: emmc_ds { + mux { + groups = "emmc_ds"; + function = "emmc"; + bias-pull-down; + }; + }; + emmc_clk_gate_pins: emmc_clk_gate { mux { groups = "BOOT_8"; @@ -559,13 +573,18 @@ }; sdio_pins: sdio { - mux { + mux-0 { groups = "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", - "sdio_cmd", - "sdio_clk"; + "sdio_cmd"; + function = "sdio"; + bias-pull-up; + }; + + mux-1 { + groups = "sdio_clk"; function = "sdio"; bias-disable; }; diff --git a/dts/src/arm64/amlogic/meson-g12a-sei510.dts b/dts/src/arm64/amlogic/meson-g12a-sei510.dts index 34b40587e5..c7a8736885 100644 --- a/dts/src/arm64/amlogic/meson-g12a-sei510.dts +++ b/dts/src/arm64/amlogic/meson-g12a-sei510.dts @@ -9,15 +9,12 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { compatible = "seirobotics,sei510", "amlogic,g12a"; model = "SEI Robotics SEI510"; - aliases { - serial0 = &uart_AO; - }; - adc_keys { compatible = "adc-keys"; io-channels = <&saradc 0>; @@ -31,13 +28,25 @@ }; }; - ao_5v: regulator-ao_5v { - compatible = "regulator-fixed"; - regulator-name = "AO_5V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_in>; - regulator-always-on; + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + mono_dac: audio-codec-0 { + compatible = "maxim,max98357a"; + #sound-dai-cells = <0>; + sound-name-prefix = "U16"; + sdmode-gpios = <&gpio GPIOX_8 GPIO_ACTIVE_HIGH>; + }; + + dmics: audio-codec-1 { + #sound-dai-cells = <0>; + compatible = "dmic-codec"; + num-channels = <2>; + wakeup-delay-ms = <50>; + status = "okay"; + sound-name-prefix = "MIC"; }; chosen { @@ -54,21 +63,9 @@ }; }; - dc_in: regulator-dc_in { - compatible = "regulator-fixed"; - regulator-name = "DC_IN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - emmc_1v8: regulator-emmc_1v8 { - compatible = "regulator-fixed"; - regulator-name = "EMMC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vddao_3v3>; - regulator-always-on; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; }; hdmi-connector { @@ -87,12 +84,30 @@ reg = <0x0 0x0 0x0 0x40000000>; }; - reserved-memory { - /* TEE Reserved Memory */ - bl32_reserved: bl32@5000000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; + ao_5v: regulator-ao_5v { + compatible = "regulator-fixed"; + regulator-name = "AO_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_in>; + regulator-always-on; + }; + + dc_in: regulator-dc_in { + compatible = "regulator-fixed"; + regulator-name = "DC_IN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + emmc_1v8: regulator-emmc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; }; vddao_3v3: regulator-vddao_3v3 { @@ -122,6 +137,146 @@ vin-supply = <&vddao_3v3>; regulator-always-on; }; + + reserved-memory { + /* TEE Reserved Memory */ + bl32_reserved: bl32@5000000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12A-SEI510"; + audio-aux-devs = <&tdmout_a>, <&tdmout_b>, + <&tdmin_a>, <&tdmin_b>; + audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0", + "TDMOUT_A IN 1", "FRDDR_B OUT 0", + "TDMOUT_A IN 2", "FRDDR_C OUT 0", + "TDM_A Playback", "TDMOUT_A OUT", + "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "TODDR_A IN 4", "PDM Capture", + "TODDR_B IN 4", "PDM Capture", + "TODDR_C IN 4", "PDM Capture", + "TDMIN_A IN 0", "TDM_A Capture", + "TDMIN_A IN 3", "TDM_A Loopback", + "TDMIN_B IN 0", "TDM_A Capture", + "TDMIN_B IN 3", "TDM_A Loopback", + "TDMIN_A IN 1", "TDM_B Capture", + "TDMIN_A IN 4", "TDM_B Loopback", + "TDMIN_B IN 1", "TDM_B Capture", + "TDMIN_B IN 4", "TDM_B Loopback", + "TODDR_A IN 0", "TDMIN_A OUT", + "TODDR_B IN 0", "TDMIN_A OUT", + "TODDR_C IN 0", "TDMIN_A OUT", + "TODDR_A IN 1", "TDMIN_B OUT", + "TODDR_B IN 1", "TDMIN_B OUT", + "TODDR_C IN 1", "TDMIN_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + dai-link-3 { + sound-dai = <&toddr_a>; + }; + + dai-link-4 { + sound-dai = <&toddr_b>; + }; + + dai-link-5 { + sound-dai = <&toddr_c>; + }; + + /* internal speaker interface */ + dai-link-6 { + sound-dai = <&tdmif_a>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + mclk-fs = <256>; + + codec-0 { + sound-dai = <&mono_dac>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>; + }; + }; + + /* 8ch hdmi interface */ + dai-link-7 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec@0 { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* internal digital mics */ + dai-link-8 { + sound-dai = <&pdm>; + + codec { + sound-dai = <&dmics>; + }; + }; + + /* hdmi glue */ + dai-link-9 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; }; &cec_AO { @@ -138,27 +293,32 @@ hdmi-phandle = <&hdmi_tx>; }; +&clkc_audio { + status = "okay"; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; }; }; -&saradc { +ðmac { status = "okay"; - vref-supply = <&vddio_ao1v8>; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; }; -&uart_A { +&frddr_a { status = "okay"; - pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; - pinctrl-names = "default"; - uart-has-rtscts; +}; - bluetooth { - compatible = "brcm,bcm43438-bt"; - shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; - }; +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; }; &hdmi_tx { @@ -173,6 +333,163 @@ }; }; +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + +&pdm { + pinctrl-0 = <&pdm_din0_z_pins>, <&pdm_din1_z_pins>, + <&pdm_din2_z_pins>, <&pdm_din3_z_pins>, + <&pdm_dclk_z_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao1v8>; +}; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_ao1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&emmc_1v8>; +}; + +&tdmif_a { + pinctrl-0 = <&tdm_a_dout0_pins>, <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>; + pinctrl-names = "default"; + status = "okay"; + + assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD0>, + <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD0>; + assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + assigned-clock-rates = <0>, <0>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmin_a { + status = "okay"; +}; + +&tdmin_b { + status = "okay"; +}; + +&tdmout_a { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&toddr_a { + status = "okay"; +}; + +&toddr_b { + status = "okay"; +}; + +&toddr_c { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; + vbat-supply = <&vddao_3v3>; + vddio-supply = <&vddio_ao1v8>; + }; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/dts/src/arm64/amlogic/meson-g12a-u200.dts b/dts/src/arm64/amlogic/meson-g12a-u200.dts index 0e8045b8a9..8551fbd4a4 100644 --- a/dts/src/arm64/amlogic/meson-g12a-u200.dts +++ b/dts/src/arm64/amlogic/meson-g12a-u200.dts @@ -15,14 +15,12 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; + chosen { stdout-path = "serial0:115200n8"; }; - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; cvbs-connector { compatible = "composite-video-connector"; @@ -34,13 +32,9 @@ }; }; - flash_1v8: regulator-flash_1v8 { - compatible = "regulator-fixed"; - regulator-name = "FLASH_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - vin-supply = <&vcc_3v3>; - regulator-always-on; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; }; hdmi-connector { @@ -54,6 +48,20 @@ }; }; + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + main_12v: regulator-main_12v { compatible = "regulator-fixed"; regulator-name = "12V"; @@ -62,6 +70,17 @@ regulator-always-on; }; + usb_pwr_en: regulator-usb_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + vcc_1v8: regulator-vcc_1v8 { compatible = "regulator-fixed"; regulator-name = "VCC_1V8"; @@ -92,17 +111,6 @@ enable-active-high; }; - usb_pwr_en: regulator-usb_pwr_en { - compatible = "regulator-fixed"; - regulator-name = "USB_PWR_EN"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&vcc_5v>; - - gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - vddao_1v8: regulator-vddao_1v8 { compatible = "regulator-fixed"; regulator-name = "VDDAO_1V8"; @@ -143,6 +151,12 @@ }; }; +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; @@ -156,6 +170,70 @@ }; }; +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +/* i2c Touch */ +&i2c0 { + status = "okay"; + pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>; + pinctrl-names = "default"; +}; + +/* i2c CM */ +&i2c2 { + status = "okay"; + pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>; + pinctrl-names = "default"; +}; + +/* i2c Audio */ +&i2c3 { + status = "okay"; + pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>; + pinctrl-names = "default"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; diff --git a/dts/src/arm64/amlogic/meson-g12a-x96-max.dts b/dts/src/arm64/amlogic/meson-g12a-x96-max.dts index b3d913f28f..fe4013cca8 100644 --- a/dts/src/arm64/amlogic/meson-g12a-x96-max.dts +++ b/dts/src/arm64/amlogic/meson-g12a-x96-max.dts @@ -8,6 +8,7 @@ #include "meson-g12a.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> / { compatible = "amediatech,x96-max", "amlogic,u200", "amlogic,g12a"; @@ -15,7 +16,16 @@ aliases { serial0 = &uart_AO; + ethernet0 = ðmac; }; + + spdif_dit: audio-codec-1 { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + status = "okay"; + sound-name-prefix = "DIT"; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -45,6 +55,18 @@ }; }; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + flash_1v8: regulator-flash_1v8 { compatible = "regulator-fixed"; regulator-name = "FLASH_1V8"; @@ -109,6 +131,97 @@ vin-supply = <&dc_in>; regulator-always-on; }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12A-X96-MAX"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT", + "SPDIFOUT IN 0", "FRDDR_A OUT 3", + "SPDIFOUT IN 1", "FRDDR_B OUT 3", + "SPDIFOUT IN 2", "FRDDR_C OUT 3"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* spdif hdmi or toslink interface */ + dai-link-4 { + sound-dai = <&spdifout>; + + codec-0 { + sound-dai = <&spdif_dit>; + }; + + codec-1 { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>; + }; + }; + + /* spdif hdmi interface */ + dai-link-5 { + sound-dai = <&spdifout_b>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-6 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; +}; + +&arb { + status = "okay"; }; &cec_AO { @@ -125,12 +238,28 @@ hdmi-phandle = <&hdmi_tx>; }; +&clkc_audio { + status = "okay"; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; }; }; +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; @@ -144,6 +273,46 @@ }; }; +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + eee-broken-1000t; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&xtal>; + clock-names = "clkin0"; +}; + &uart_A { status = "okay"; pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; @@ -153,6 +322,9 @@ bluetooth { compatible = "brcm,bcm43438-bt"; shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + max-speed = <2000000>; + clocks = <&wifi32k>; + clock-names = "lpo"; }; }; @@ -166,3 +338,88 @@ status = "okay"; dr_mode = "host"; }; + +/* SDIO */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + sd-uhs-sdr50; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_1v8>; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddao_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + max-frequency = <100000000>; + non-removable; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&spdifout { + pinctrl-0 = <&spdif_out_h_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&spdifout_b { + status = "okay"; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; diff --git a/dts/src/arm64/amlogic/meson-g12a.dtsi b/dts/src/arm64/amlogic/meson-g12a.dtsi index 9f72396ba7..f8d43e3dcf 100644 --- a/dts/src/arm64/amlogic/meson-g12a.dtsi +++ b/dts/src/arm64/amlogic/meson-g12a.dtsi @@ -5,10 +5,12 @@ #include <dt-bindings/phy/phy.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/axg-audio-clkc.h> #include <dt-bindings/clock/g12a-clkc.h> #include <dt-bindings/clock/g12a-aoclkc.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> #include <dt-bindings/reset/amlogic,meson-g12a-reset.h> / { @@ -18,6 +20,39 @@ #address-cells = <2>; #size-cells = <2>; + tdmif_a: audio-controller-0 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_A"; + clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>, + <&clkc_audio AUD_CLKID_MST_A_SCLK>, + <&clkc_audio AUD_CLKID_MST_A_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_b: audio-controller-1 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_B"; + clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>, + <&clkc_audio AUD_CLKID_MST_B_SCLK>, + <&clkc_audio AUD_CLKID_MST_B_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + + tdmif_c: audio-controller-2 { + compatible = "amlogic,axg-tdm-iface"; + #sound-dai-cells = <0>; + sound-name-prefix = "TDM_C"; + clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>, + <&clkc_audio AUD_CLKID_MST_C_SCLK>, + <&clkc_audio AUD_CLKID_MST_C_LRCLK>; + clock-names = "mclk", "sclk", "lrclk"; + status = "disabled"; + }; + cpus { #address-cells = <0x2>; #size-cells = <0x0>; @@ -102,6 +137,27 @@ #size-cells = <2>; ranges; + ethmac: ethernet@ff3f0000 { + compatible = "amlogic,meson-axg-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; + reg = <0x0 0xff3f0000 0x0 0x10000 + 0x0 0xff634540 0x0 0x8>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + status = "disabled"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + }; + apb: bus@ff600000 { compatible = "simple-bus"; reg = <0x0 0xff600000 0x0 0x200000>; @@ -123,6 +179,7 @@ clock-names = "isfr", "iahb", "venci"; #address-cells = <1>; #size-cells = <0>; + #sound-dai-cells = <0>; status = "disabled"; /* VPU VENC Input */ @@ -140,6 +197,19 @@ }; }; + apb_efuse: bus@30000 { + compatible = "simple-bus"; + reg = <0x0 0x30000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x30000 0x0 0x2000>; + + hwrng: rng@218 { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x218 0x0 0x4>; + }; + }; + periphs: bus@34400 { compatible = "simple-bus"; reg = <0x0 0x34400 0x0 0x400>; @@ -185,12 +255,55 @@ }; }; + emmc_pins: emmc { + mux-0 { + groups = "emmc_nand_d0", + "emmc_nand_d1", + "emmc_nand_d2", + "emmc_nand_d3", + "emmc_nand_d4", + "emmc_nand_d5", + "emmc_nand_d6", + "emmc_nand_d7", + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "emmc_clk"; + function = "emmc"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + emmc_ds_pins: emmc-ds { + mux { + groups = "emmc_nand_ds"; + function = "emmc"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + hdmitx_ddc_pins: hdmitx_ddc { mux { groups = "hdmitx_sda", "hdmitx_sck"; function = "hdmitx"; bias-disable; + drive-strength-microamp = <4000>; }; }; @@ -202,6 +315,1040 @@ }; }; + + i2c0_sda_c_pins: i2c0-sda-c { + mux { + groups = "i2c0_sda_c"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + + }; + }; + + i2c0_sck_c_pins: i2c0-sck-c { + mux { + groups = "i2c0_sck_c"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z0_pins: i2c0-sda-z0 { + mux { + groups = "i2c0_sda_z0"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sck_z1_pins: i2c0-sck-z1 { + mux { + groups = "i2c0_sck_z1"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z7_pins: i2c0-sda-z7 { + mux { + groups = "i2c0_sda_z7"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c0_sda_z8_pins: i2c0-sda-z8 { + mux { + groups = "i2c0_sda_z8"; + function = "i2c0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_x_pins: i2c1-sda-x { + mux { + groups = "i2c1_sda_x"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_x_pins: i2c1-sck-x { + mux { + groups = "i2c1_sck_x"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_h2_pins: i2c1-sda-h2 { + mux { + groups = "i2c1_sda_h2"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_h3_pins: i2c1-sck-h3 { + mux { + groups = "i2c1_sck_h3"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sda_h6_pins: i2c1-sda-h6 { + mux { + groups = "i2c1_sda_h6"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c1_sck_h7_pins: i2c1-sck-h7 { + mux { + groups = "i2c1_sck_h7"; + function = "i2c1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sda_x_pins: i2c2-sda-x { + mux { + groups = "i2c2_sda_x"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sck_x_pins: i2c2-sck-x { + mux { + groups = "i2c2_sck_x"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sda_z_pins: i2c2-sda-z { + mux { + groups = "i2c2_sda_z"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c2_sck_z_pins: i2c2-sck-z { + mux { + groups = "i2c2_sck_z"; + function = "i2c2"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sda_h_pins: i2c3-sda-h { + mux { + groups = "i2c3_sda_h"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sck_h_pins: i2c3-sck-h { + mux { + groups = "i2c3_sck_h"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sda_a_pins: i2c3-sda-a { + mux { + groups = "i2c3_sda_a"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c3_sck_a_pins: i2c3-sck-a { + mux { + groups = "i2c3_sck_a"; + function = "i2c3"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk0_a_pins: mclk0-a { + mux { + groups = "mclk0_a"; + function = "mclk0"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_a_pins: mclk1-a { + mux { + groups = "mclk1_a"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_x_pins: mclk1-x { + mux { + groups = "mclk1_x"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk1_z_pins: mclk1-z { + mux { + groups = "mclk1_z"; + function = "mclk1"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + pdm_din0_a_pins: pdm-din0-a { + mux { + groups = "pdm_din0_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_c_pins: pdm-din0-c { + mux { + groups = "pdm_din0_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_x_pins: pdm-din0-x { + mux { + groups = "pdm_din0_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din0_z_pins: pdm-din0-z { + mux { + groups = "pdm_din0_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_a_pins: pdm-din1-a { + mux { + groups = "pdm_din1_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_c_pins: pdm-din1-c { + mux { + groups = "pdm_din1_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_x_pins: pdm-din1-x { + mux { + groups = "pdm_din1_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din1_z_pins: pdm-din1-z { + mux { + groups = "pdm_din1_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_a_pins: pdm-din2-a { + mux { + groups = "pdm_din2_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_c_pins: pdm-din2-c { + mux { + groups = "pdm_din2_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_x_pins: pdm-din2-x { + mux { + groups = "pdm_din2_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din2_z_pins: pdm-din2-z { + mux { + groups = "pdm_din2_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_a_pins: pdm-din3-a { + mux { + groups = "pdm_din3_a"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_c_pins: pdm-din3-c { + mux { + groups = "pdm_din3_c"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_x_pins: pdm-din3-x { + mux { + groups = "pdm_din3_x"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_din3_z_pins: pdm-din3-z { + mux { + groups = "pdm_din3_z"; + function = "pdm"; + bias-disable; + }; + }; + + pdm_dclk_a_pins: pdm-dclk-a { + mux { + groups = "pdm_dclk_a"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_c_pins: pdm-dclk-c { + mux { + groups = "pdm_dclk_c"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_x_pins: pdm-dclk-x { + mux { + groups = "pdm_dclk_x"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pdm_dclk_z_pins: pdm-dclk-z { + mux { + groups = "pdm_dclk_z"; + function = "pdm"; + bias-disable; + drive-strength-microamp = <500>; + }; + }; + + pwm_a_pins: pwm-a { + mux { + groups = "pwm_a"; + function = "pwm_a"; + bias-disable; + }; + }; + + pwm_b_x7_pins: pwm-b-x7 { + mux { + groups = "pwm_b_x7"; + function = "pwm_b"; + bias-disable; + }; + }; + + pwm_b_x19_pins: pwm-b-x19 { + mux { + groups = "pwm_b_x19"; + function = "pwm_b"; + bias-disable; + }; + }; + + pwm_c_c_pins: pwm-c-c { + mux { + groups = "pwm_c_c"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_c_x5_pins: pwm-c-x5 { + mux { + groups = "pwm_c_x5"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_c_x8_pins: pwm-c-x8 { + mux { + groups = "pwm_c_x8"; + function = "pwm_c"; + bias-disable; + }; + }; + + pwm_d_x3_pins: pwm-d-x3 { + mux { + groups = "pwm_d_x3"; + function = "pwm_d"; + bias-disable; + }; + }; + + pwm_d_x6_pins: pwm-d-x6 { + mux { + groups = "pwm_d_x6"; + function = "pwm_d"; + bias-disable; + }; + }; + + pwm_e_pins: pwm-e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + bias-disable; + }; + }; + + pwm_f_x_pins: pwm-f-x { + mux { + groups = "pwm_f_x"; + function = "pwm_f"; + bias-disable; + }; + }; + + pwm_f_h_pins: pwm-f-h { + mux { + groups = "pwm_f_h"; + function = "pwm_f"; + bias-disable; + }; + }; + + sdcard_c_pins: sdcard_c { + mux-0 { + groups = "sdcard_d0_c", + "sdcard_d1_c", + "sdcard_d2_c", + "sdcard_d3_c", + "sdcard_cmd_c"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "sdcard_clk_c"; + function = "sdcard"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_c_pins: sdcard_clk_gate_c { + mux { + groups = "GPIOC_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_z_pins: sdcard_z { + mux-0 { + groups = "sdcard_d0_z", + "sdcard_d1_z", + "sdcard_d2_z", + "sdcard_d3_z", + "sdcard_cmd_z"; + function = "sdcard"; + bias-pull-up; + drive-strength-microamp = <4000>; + }; + + mux-1 { + groups = "sdcard_clk_z"; + function = "sdcard"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdcard_clk_gate_z_pins: sdcard_clk_gate_z { + mux { + groups = "GPIOZ_6"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_clk", + "sdio_cmd"; + function = "sdio"; + bias-disable; + drive-strength-microamp = <4000>; + }; + }; + + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + bias-pull-down; + drive-strength-microamp = <4000>; + }; + }; + + spdif_in_a10_pins: spdif-in-a10 { + mux { + groups = "spdif_in_a10"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_in_a12_pins: spdif-in-a12 { + mux { + groups = "spdif_in_a12"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_in_h_pins: spdif-in-h { + mux { + groups = "spdif_in_h"; + function = "spdif_in"; + bias-disable; + }; + }; + + spdif_out_h_pins: spdif-out-h { + mux { + groups = "spdif_out_h"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + spdif_out_a11_pins: spdif-out-a11 { + mux { + groups = "spdif_out_a11"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + spdif_out_a13_pins: spdif-out-a13 { + mux { + groups = "spdif_out_a13"; + function = "spdif_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + tdm_a_din0_pins: tdm-a-din0 { + mux { + groups = "tdm_a_din0"; + function = "tdm_a"; + bias-disable; + }; + }; + + + tdm_a_din1_pins: tdm-a-din1 { + mux { + groups = "tdm_a_din1"; + function = "tdm_a"; + bias-disable; + }; + }; + + tdm_a_dout0_pins: tdm-a-dout0 { + mux { + groups = "tdm_a_dout0"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_dout1_pins: tdm-a-dout1 { + mux { + groups = "tdm_a_dout1"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_fs_pins: tdm-a-fs { + mux { + groups = "tdm_a_fs"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_sclk_pins: tdm-a-sclk { + mux { + groups = "tdm_a_sclk"; + function = "tdm_a"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_a_slv_fs_pins: tdm-a-slv-fs { + mux { + groups = "tdm_a_slv_fs"; + function = "tdm_a"; + bias-disable; + }; + }; + + + tdm_a_slv_sclk_pins: tdm-a-slv-sclk { + mux { + groups = "tdm_a_slv_sclk"; + function = "tdm_a"; + bias-disable; + }; + }; + + tdm_b_din0_pins: tdm-b-din0 { + mux { + groups = "tdm_b_din0"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din1_pins: tdm-b-din1 { + mux { + groups = "tdm_b_din1"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din2_pins: tdm-b-din2 { + mux { + groups = "tdm_b_din2"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din3_a_pins: tdm-b-din3-a { + mux { + groups = "tdm_b_din3_a"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_din3_h_pins: tdm-b-din3-h { + mux { + groups = "tdm_b_din3_h"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_dout0_pins: tdm-b-dout0 { + mux { + groups = "tdm_b_dout0"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout1_pins: tdm-b-dout1 { + mux { + groups = "tdm_b_dout1"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout2_pins: tdm-b-dout2 { + mux { + groups = "tdm_b_dout2"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout3_a_pins: tdm-b-dout3-a { + mux { + groups = "tdm_b_dout3_a"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_dout3_h_pins: tdm-b-dout3-h { + mux { + groups = "tdm_b_dout3_h"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_fs_pins: tdm-b-fs { + mux { + groups = "tdm_b_fs"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_sclk_pins: tdm-b-sclk { + mux { + groups = "tdm_b_sclk"; + function = "tdm_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_b_slv_fs_pins: tdm-b-slv-fs { + mux { + groups = "tdm_b_slv_fs"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_b_slv_sclk_pins: tdm-b-slv-sclk { + mux { + groups = "tdm_b_slv_sclk"; + function = "tdm_b"; + bias-disable; + }; + }; + + tdm_c_din0_a_pins: tdm-c-din0-a { + mux { + groups = "tdm_c_din0_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din0_z_pins: tdm-c-din0-z { + mux { + groups = "tdm_c_din0_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din1_a_pins: tdm-c-din1-a { + mux { + groups = "tdm_c_din1_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din1_z_pins: tdm-c-din1-z { + mux { + groups = "tdm_c_din1_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din2_a_pins: tdm-c-din2-a { + mux { + groups = "tdm_c_din2_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + eth_leds_pins: eth-leds { + mux { + groups = "eth_link_led", + "eth_act_led"; + function = "eth"; + bias-disable; + }; + }; + + eth_pins: eth { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_rgmii_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_txen", + "eth_txd0", + "eth_txd1"; + function = "eth"; + drive-strength-microamp = <4000>; + bias-disable; + }; + }; + + eth_rgmii_pins: eth-rgmii { + mux { + groups = "eth_rxd2_rgmii", + "eth_rxd3_rgmii", + "eth_rgmii_tx_clk", + "eth_txd2_rgmii", + "eth_txd3_rgmii"; + function = "eth"; + drive-strength-microamp = <4000>; + bias-disable; + }; + }; + + tdm_c_din2_z_pins: tdm-c-din2-z { + mux { + groups = "tdm_c_din2_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din3_a_pins: tdm-c-din3-a { + mux { + groups = "tdm_c_din3_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_din3_z_pins: tdm-c-din3-z { + mux { + groups = "tdm_c_din3_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_dout0_a_pins: tdm-c-dout0-a { + mux { + groups = "tdm_c_dout0_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout0_z_pins: tdm-c-dout0-z { + mux { + groups = "tdm_c_dout0_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout1_a_pins: tdm-c-dout1-a { + mux { + groups = "tdm_c_dout1_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout1_z_pins: tdm-c-dout1-z { + mux { + groups = "tdm_c_dout1_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout2_a_pins: tdm-c-dout2-a { + mux { + groups = "tdm_c_dout2_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout2_z_pins: tdm-c-dout2-z { + mux { + groups = "tdm_c_dout2_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout3_a_pins: tdm-c-dout3-a { + mux { + groups = "tdm_c_dout3_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_dout3_z_pins: tdm-c-dout3-z { + mux { + groups = "tdm_c_dout3_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_fs_a_pins: tdm-c-fs-a { + mux { + groups = "tdm_c_fs_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_fs_z_pins: tdm-c-fs-z { + mux { + groups = "tdm_c_fs_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_sclk_a_pins: tdm-c-sclk-a { + mux { + groups = "tdm_c_sclk_a"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_sclk_z_pins: tdm-c-sclk-z { + mux { + groups = "tdm_c_sclk_z"; + function = "tdm_c"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_c_slv_fs_a_pins: tdm-c-slv-fs-a { + mux { + groups = "tdm_c_slv_fs_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_fs_z_pins: tdm-c-slv-fs-z { + mux { + groups = "tdm_c_slv_fs_z"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_sclk_a_pins: tdm-c-slv-sclk-a { + mux { + groups = "tdm_c_slv_sclk_a"; + function = "tdm_c"; + bias-disable; + }; + }; + + tdm_c_slv_sclk_z_pins: tdm-c-slv-sclk-z { + mux { + groups = "tdm_c_slv_sclk_z"; + function = "tdm_c"; + bias-disable; + }; + }; + uart_a_pins: uart-a { mux { groups = "uart_a_tx", @@ -303,6 +1450,282 @@ }; }; + pdm: audio-controller@40000 { + compatible = "amlogic,g12a-pdm", + "amlogic,axg-pdm"; + reg = <0x0 0x40000 0x0 0x34>; + #sound-dai-cells = <0>; + sound-name-prefix = "PDM"; + clocks = <&clkc_audio AUD_CLKID_PDM>, + <&clkc_audio AUD_CLKID_PDM_DCLK>, + <&clkc_audio AUD_CLKID_PDM_SYSCLK>; + clock-names = "pclk", "dclk", "sysclk"; + status = "disabled"; + }; + + audio: bus@42000 { + compatible = "simple-bus"; + reg = <0x0 0x42000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0x42000 0x0 0x2000>; + + clkc_audio: clock-controller@0 { + status = "disabled"; + compatible = "amlogic,g12a-audio-clkc"; + reg = <0x0 0x0 0x0 0xb4>; + #clock-cells = <1>; + + clocks = <&clkc CLKID_AUDIO>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>, + <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL3>, + <&clkc CLKID_HIFI_PLL>, + <&clkc CLKID_FCLK_DIV3>, + <&clkc CLKID_FCLK_DIV4>, + <&clkc CLKID_GP0_PLL>; + clock-names = "pclk", + "mst_in0", + "mst_in1", + "mst_in2", + "mst_in3", + "mst_in4", + "mst_in5", + "mst_in6", + "mst_in7"; + + resets = <&reset RESET_AUDIO>; + }; + + toddr_a: audio-controller@100 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x100 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_A"; + interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_A>; + resets = <&arb AXG_ARB_TODDR_A>; + status = "disabled"; + }; + + toddr_b: audio-controller@140 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x140 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_B"; + interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_B>; + resets = <&arb AXG_ARB_TODDR_B>; + status = "disabled"; + }; + + toddr_c: audio-controller@180 { + compatible = "amlogic,g12a-toddr", + "amlogic,axg-toddr"; + reg = <0x0 0x180 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "TODDR_C"; + interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_TODDR_C>; + resets = <&arb AXG_ARB_TODDR_C>; + status = "disabled"; + }; + + frddr_a: audio-controller@1c0 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x1c0 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_A"; + interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_A>; + resets = <&arb AXG_ARB_FRDDR_A>; + status = "disabled"; + }; + + frddr_b: audio-controller@200 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x200 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_B"; + interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_B>; + resets = <&arb AXG_ARB_FRDDR_B>; + status = "disabled"; + }; + + frddr_c: audio-controller@240 { + compatible = "amlogic,g12a-frddr", + "amlogic,axg-frddr"; + reg = <0x0 0x240 0x0 0x1c>; + #sound-dai-cells = <0>; + sound-name-prefix = "FRDDR_C"; + interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_FRDDR_C>; + resets = <&arb AXG_ARB_FRDDR_C>; + status = "disabled"; + }; + + arb: reset-controller@280 { + status = "disabled"; + compatible = "amlogic,meson-axg-audio-arb"; + reg = <0x0 0x280 0x0 0x4>; + #reset-cells = <1>; + clocks = <&clkc_audio AUD_CLKID_DDR_ARB>; + }; + + tdmin_a: audio-controller@300 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x300 0x0 0x40>; + sound-name-prefix = "TDMIN_A"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_A>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_b: audio-controller@340 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x340 0x0 0x40>; + sound-name-prefix = "TDMIN_B"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_B>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_c: audio-controller@380 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x380 0x0 0x40>; + sound-name-prefix = "TDMIN_C"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_C>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmin_lb: audio-controller@3c0 { + compatible = "amlogic,g12a-tdmin", + "amlogic,axg-tdmin"; + reg = <0x0 0x3c0 0x0 0x40>; + sound-name-prefix = "TDMIN_LB"; + clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>, + <&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifin: audio-controller@400 { + compatible = "amlogic,g12a-spdifin", + "amlogic,axg-spdifin"; + reg = <0x0 0x400 0x0 0x30>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFIN"; + interrupts = <GIC_SPI 151 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc_audio AUD_CLKID_SPDIFIN>, + <&clkc_audio AUD_CLKID_SPDIFIN_CLK>; + clock-names = "pclk", "refclk"; + status = "disabled"; + }; + + spdifout: audio-controller@480 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x480 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>, + <&clkc_audio AUD_CLKID_SPDIFOUT_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + + tdmout_a: audio-controller@500 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x500 0x0 0x40>; + sound-name-prefix = "TDMOUT_A"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_b: audio-controller@540 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x540 0x0 0x40>; + sound-name-prefix = "TDMOUT_B"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + tdmout_c: audio-controller@580 { + compatible = "amlogic,g12a-tdmout"; + reg = <0x0 0x580 0x0 0x40>; + sound-name-prefix = "TDMOUT_C"; + clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>, + <&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>; + clock-names = "pclk", "sclk", "sclk_sel", + "lrclk", "lrclk_sel"; + status = "disabled"; + }; + + spdifout_b: audio-controller@680 { + compatible = "amlogic,g12a-spdifout", + "amlogic,axg-spdifout"; + reg = <0x0 0x680 0x0 0x50>; + #sound-dai-cells = <0>; + sound-name-prefix = "SPDIFOUT_B"; + clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>, + <&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>; + clock-names = "pclk", "mclk"; + status = "disabled"; + }; + + tohdmitx: audio-controller@744 { + compatible = "amlogic,g12a-tohdmitx"; + reg = <0x0 0x744 0x0 0x4>; + #sound-dai-cells = <1>; + sound-name-prefix = "TOHDMITX"; + status = "disabled"; + }; + }; + usb3_pcie_phy: phy@46000 { compatible = "amlogic,g12a-usb3-pcie-phy"; reg = <0x0 0x46000 0x0 0x2000>; @@ -314,6 +1737,38 @@ assigned-clock-rates = <100000000>; #phy-cells = <1>; }; + + eth_phy: mdio-multiplexer@4c000 { + compatible = "amlogic,g12a-mdio-mux"; + reg = <0x0 0x4c000 0x0 0xa4>; + clocks = <&clkc CLKID_ETH_PHY>, + <&xtal>, + <&clkc CLKID_MPLL_50M>; + clock-names = "pclk", "clkin0", "clkin1"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + + ext_mdio: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + int_mdio: mdio@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + internal_ephy: ethernet_phy@8 { + compatible = "ethernet-phy-id0180.3301", + "ethernet-phy-ieee802.3-c22"; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <8>; + max-speed = <100>; + }; + }; + }; }; aobus: bus@ff800000 { @@ -401,6 +1856,145 @@ gpio-ranges = <&ao_pinctrl 0 0 15>; }; + i2c_ao_sck_pins: i2c_ao_sck_pins { + mux { + groups = "i2c_ao_sck"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sda_pins: i2c_ao_sda { + mux { + groups = "i2c_ao_sda"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sck_e_pins: i2c_ao_sck_e { + mux { + groups = "i2c_ao_sck_e"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + i2c_ao_sda_e_pins: i2c_ao_sda_e { + mux { + groups = "i2c_ao_sda_e"; + function = "i2c_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + mclk0_ao_pins: mclk0-ao { + mux { + groups = "mclk0_ao"; + function = "mclk0_ao"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_din0_pins: tdm-ao-b-din0 { + mux { + groups = "tdm_ao_b_din0"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + spdif_ao_out_pins: spdif-ao-out { + mux { + groups = "spdif_ao_out"; + function = "spdif_ao_out"; + drive-strength-microamp = <500>; + bias-disable; + }; + }; + + tdm_ao_b_din1_pins: tdm-ao-b-din1 { + mux { + groups = "tdm_ao_b_din1"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_din2_pins: tdm-ao-b-din2 { + mux { + groups = "tdm_ao_b_din2"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_dout0_pins: tdm-ao-b-dout0 { + mux { + groups = "tdm_ao_b_dout0"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_dout1_pins: tdm-ao-b-dout1 { + mux { + groups = "tdm_ao_b_dout1"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_dout2_pins: tdm-ao-b-dout2 { + mux { + groups = "tdm_ao_b_dout2"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_fs_pins: tdm-ao-b-fs { + mux { + groups = "tdm_ao_b_fs"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_sclk_pins: tdm-ao-b-sclk { + mux { + groups = "tdm_ao_b_sclk"; + function = "tdm_ao_b"; + bias-disable; + drive-strength-microamp = <3000>; + }; + }; + + tdm_ao_b_slv_fs_pins: tdm-ao-b-slv-fs { + mux { + groups = "tdm_ao_b_slv_fs"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + + tdm_ao_b_slv_sclk_pins: tdm-ao-b-slv-sclk { + mux { + groups = "tdm_ao_b_slv_sclk"; + function = "tdm_ao_b"; + bias-disable; + }; + }; + uart_ao_a_pins: uart-a-ao { mux { groups = "uart_ao_a_tx", @@ -418,6 +2012,69 @@ bias-disable; }; }; + + pwm_ao_a_pins: pwm-ao-a { + mux { + groups = "pwm_ao_a"; + function = "pwm_ao_a"; + bias-disable; + }; + }; + + pwm_ao_b_pins: pwm-ao-b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; + bias-disable; + }; + }; + + pwm_ao_c_4_pins: pwm-ao-c-4 { + mux { + groups = "pwm_ao_c_4"; + function = "pwm_ao_c"; + bias-disable; + }; + }; + + pwm_ao_c_6_pins: pwm-ao-c-6 { + mux { + groups = "pwm_ao_c_6"; + function = "pwm_ao_c"; + bias-disable; + }; + }; + + pwm_ao_d_5_pins: pwm-ao-d-5 { + mux { + groups = "pwm_ao_d_5"; + function = "pwm_ao_d"; + bias-disable; + }; + }; + + pwm_ao_d_10_pins: pwm-ao-d-10 { + mux { + groups = "pwm_ao_d_10"; + function = "pwm_ao_d"; + bias-disable; + }; + }; + + pwm_ao_d_e_pins: pwm-ao-d-e { + mux { + groups = "pwm_ao_d_e"; + function = "pwm_ao_d"; + }; + }; + + remote_input_ao_pins: remote-input-ao { + mux { + groups = "remote_ao_input"; + function = "remote_ao_input"; + bias-disable; + }; + }; }; }; @@ -445,12 +2102,19 @@ status = "disabled"; }; + pwm_AO_cd: pwm@2000 { + compatible = "amlogic,meson-g12a-ao-pwm-cd"; + reg = <0x0 0x2000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + uart_AO: serial@3000 { compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; reg = <0x0 0x3000 0x0 0x18>; interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; @@ -460,11 +2124,35 @@ "amlogic,meson-ao-uart"; reg = <0x0 0x4000 0x0 0x18>; interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>, <&xtal>, <&xtal>; + clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>; clock-names = "xtal", "pclk", "baud"; status = "disabled"; }; + i2c_AO: i2c@5000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x05000 0x0 0x20>; + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + pwm_AO_ab: pwm@7000 { + compatible = "amlogic,meson-g12a-ao-pwm-ab"; + reg = <0x0 0x7000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + ir: ir@8000 { + compatible = "amlogic,meson-gxbb-ir"; + reg = <0x0 0x8000 0x0 0x20>; + interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + saradc: adc@9000 { compatible = "amlogic,meson-g12a-saradc", "amlogic,meson-saradc"; @@ -533,6 +2221,76 @@ #reset-cells = <1>; }; + gpio_intc: interrupt-controller@f080 { + compatible = "amlogic,meson-g12a-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0xf080 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + }; + + pwm_ef: pwm@19000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x19000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@1a000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x1a000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ab: pwm@1b000 { + compatible = "amlogic,meson-g12a-ee-pwm"; + reg = <0x0 0x1b000 0x0 0x20>; + #pwm-cells = <3>; + status = "disabled"; + }; + + i2c3: i2c@1c000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1c000 0x0 0x20>; + interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c2: i2c@1d000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1d000 0x0 0x20>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c1: i2c@1e000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1e000 0x0 0x20>; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + + i2c0: i2c@1f000 { + compatible = "amlogic,meson-axg-i2c"; + status = "disabled"; + reg = <0x0 0x1f000 0x0 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_I2C>; + }; + clk_msr: clock-measure@18000 { compatible = "amlogic,meson-g12a-clk-measure"; reg = <0x0 0x18000 0x0 0x10>; @@ -566,6 +2324,43 @@ }; }; + sd_emmc_a: sd@ffe03000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe03000 0x0 0x800>; + interrupts = <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_A>, + <&clkc CLKID_SD_EMMC_A_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_A>; + amlogic,dram-access-quirk; + }; + + sd_emmc_b: sd@ffe05000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe05000 0x0 0x800>; + interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_B>, + <&clkc CLKID_SD_EMMC_B_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_B>; + }; + + sd_emmc_c: mmc@ffe07000 { + compatible = "amlogic,meson-axg-mmc"; + reg = <0x0 0xffe07000 0x0 0x800>; + interrupts = <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + clocks = <&clkc CLKID_SD_EMMC_C>, + <&clkc CLKID_SD_EMMC_C_CLK0>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + resets = <&reset RESET_SD_EMMC_C>; + }; + usb: usb@ffe09000 { status = "disabled"; compatible = "amlogic,meson-g12a-usb-ctrl"; diff --git a/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dts b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dts new file mode 100644 index 0000000000..81780ffcc7 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12b-odroid-n2.dts @@ -0,0 +1,386 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +/dts-v1/; + +#include "meson-g12b.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/meson-g12a-gpio.h> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h> + +/ { + compatible = "hardkernel,odroid-n2", "amlogic,g12b"; + model = "Hardkernel ODROID-N2"; + + aliases { + serial0 = &uart_AO; + ethernet0 = ðmac; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "n2:blue"; + gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + tflash_vdd: regulator-tflash_vdd { + compatible = "regulator-fixed"; + + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_ao GPIOAO_8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + tf_io: gpio-regulator-tf_io { + compatible = "regulator-gpio"; + + regulator-name = "TF_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0 + 1800000 1>; + }; + + flash_1v8: regulator-flash_1v8 { + compatible = "regulator-fixed"; + regulator-name = "FLASH_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + main_12v: regulator-main_12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + vcc_5v: regulator-vcc_5v { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&main_12v>; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + /* FIXME: actually controlled by VDDCPU_B_EN */ + }; + + hub_5v: regulator-hub_5v { + compatible = "regulator-fixed"; + regulator-name = "HUB_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to the Hub CHIPENABLE, LOW sets low power state */ + gpio = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_pwr_en: regulator-usb_pwr_en { + compatible = "regulator-fixed"; + regulator-name = "USB_PWR_EN"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc_5v>; + + /* Connected to the microUSB port power enable */ + gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vddao_1v8: regulator-vddao_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-always-on; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + + sound { + compatible = "amlogic,axg-sound-card"; + model = "G12A-ODROIDN2"; + audio-aux-devs = <&tdmout_b>; + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", + "TDMOUT_B IN 1", "FRDDR_B OUT 1", + "TDMOUT_B IN 2", "FRDDR_C OUT 1", + "TDM_B Playback", "TDMOUT_B OUT"; + + assigned-clocks = <&clkc CLKID_MPLL2>, + <&clkc CLKID_MPLL0>, + <&clkc CLKID_MPLL1>; + assigned-clock-parents = <0>, <0>, <0>; + assigned-clock-rates = <294912000>, + <270950400>, + <393216000>; + status = "okay"; + + dai-link-0 { + sound-dai = <&frddr_a>; + }; + + dai-link-1 { + sound-dai = <&frddr_b>; + }; + + dai-link-2 { + sound-dai = <&frddr_c>; + }; + + /* 8ch hdmi interface */ + dai-link-3 { + sound-dai = <&tdmif_b>; + dai-format = "i2s"; + dai-tdm-slot-tx-mask-0 = <1 1>; + dai-tdm-slot-tx-mask-1 = <1 1>; + dai-tdm-slot-tx-mask-2 = <1 1>; + dai-tdm-slot-tx-mask-3 = <1 1>; + mclk-fs = <256>; + + codec { + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>; + }; + }; + + /* hdmi glue */ + dai-link-4 { + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>; + + codec { + sound-dai = <&hdmi_tx>; + }; + }; + }; +}; + +&arb { + status = "okay"; +}; + +&cec_AO { + pinctrl-0 = <&cec_ao_a_h_pins>; + pinctrl-names = "default"; + status = "disabled"; + hdmi-phandle = <&hdmi_tx>; +}; + +&cecb_AO { + pinctrl-0 = <&cec_ao_b_h_pins>; + pinctrl-names = "default"; + status = "okay"; + hdmi-phandle = <&hdmi_tx>; +}; + +&clkc_audio { + status = "okay"; +}; + +&ext_mdio { + external_phy: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_14 */ + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +ðmac { + pinctrl-0 = <ð_pins>, <ð_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; +}; + +&frddr_a { + status = "okay"; +}; + +&frddr_b { + status = "okay"; +}; + +&frddr_c { + status = "okay"; +}; + +&gpio { + /* + * WARNING: The USB Hub on the Odroid-N2 needs a reset signal + * to be turned high in order to be detected by the USB Controller + * This signal should be handled by a USB specific power sequence + * in order to reset the Hub when USB bus is powered down. + */ + usb-hub { + gpio-hog; + gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-hub-reset"; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>; + pinctrl-names = "default"; + hdmi-supply = <&vcc_5v>; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_c_pins>; + pinctrl-1 = <&sdcard_clk_gate_c_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&tf_io>; + +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; + + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; + disable-wp; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&flash_1v8>; +}; + +&tdmif_b { + status = "okay"; +}; + +&tdmout_b { + status = "okay"; +}; + +&tohdmitx { + status = "okay"; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&usb { + status = "okay"; + vbus-supply = <&usb_pwr_en>; +}; + +&usb2_phy0 { + phy-supply = <&vcc_5v>; +}; + +&usb2_phy1 { + /* Enable the hub which is connected to this port */ + phy-supply = <&hub_5v>; +}; diff --git a/dts/src/arm64/amlogic/meson-g12b.dtsi b/dts/src/arm64/amlogic/meson-g12b.dtsi new file mode 100644 index 0000000000..9e88e513b2 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-g12b.dtsi @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 BayLibre, SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + */ + +#include "meson-g12a.dtsi" + +/ { + compatible = "amlogic,g12b"; + + cpus { + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu100>; + }; + + core1 { + cpu = <&cpu101>; + }; + + core2 { + cpu = <&cpu102>; + }; + + core3 { + cpu = <&cpu103>; + }; + }; + }; + + /delete-node/ cpu@2; + /delete-node/ cpu@3; + + cpu100: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu101: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu102: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x102>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu103: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x0 0x103>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + }; +}; + +&clkc { + compatible = "amlogic,g12b-clkc"; +}; diff --git a/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi b/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi index 016641a416..a9b778571c 100644 --- a/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi +++ b/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi @@ -164,7 +164,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -184,7 +184,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gx.dtsi b/dts/src/arm64/amlogic/meson-gx.dtsi index 6772709b9e..74d03fc706 100644 --- a/dts/src/arm64/amlogic/meson-gx.dtsi +++ b/dts/src/arm64/amlogic/meson-gx.dtsi @@ -486,7 +486,9 @@ }; ethmac: ethernet@c9410000 { - compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; + compatible = "amlogic,meson-gxbb-dwmac", + "snps,dwmac-3.70a", + "snps,dwmac"; reg = <0x0 0xc9410000 0x0 0x10000 0x0 0xc8834540 0x0 0x4>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-nanopi-k2.dts b/dts/src/arm64/amlogic/meson-gxbb-nanopi-k2.dts index ade2ee09ae..c34c1c90cc 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-nanopi-k2.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-nanopi-k2.dts @@ -154,10 +154,6 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -166,6 +162,11 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; @@ -273,7 +274,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <200000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -301,8 +302,8 @@ sd-uhs-sdr12; sd-uhs-sdr25; sd-uhs-sdr50; - sd-uhs-sdr104; - max-frequency = <200000000>; + sd-uhs-ddr50; + max-frequency = <100000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts b/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts index 25105ac96d..b636912a27 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts @@ -162,10 +162,6 @@ phy-handle = <ð_phy0>; phy-mode = "rmii"; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -174,6 +170,10 @@ eth_phy0: ethernet-phy@0 { /* IC Plus IP101GR (0x02430c54) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <10000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; }; }; }; @@ -235,7 +235,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts b/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts index 1cc9dc68ef..9972b1515d 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts @@ -126,10 +126,6 @@ phy-handle = <ð_phy0>; phy-mode = "rgmii"; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - amlogic,tx-delay-ns = <2>; mdio { @@ -140,6 +136,11 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; @@ -255,6 +256,10 @@ bus-width = <4>; cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-ddr50; max-frequency = <100000000>; disable-wp; @@ -272,7 +277,7 @@ pinctrl-names = "default", "clk-gate"; bus-width = <8>; - max-frequency = <100000000>; + max-frequency = <200000000>; non-removable; disable-wp; cap-mmc-highspeed; diff --git a/dts/src/arm64/amlogic/meson-gxbb-p200.dts b/dts/src/arm64/amlogic/meson-gxbb-p200.dts index 9d2406a7c4..3c93d1898b 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-p200.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-p200.dts @@ -68,10 +68,6 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -80,6 +76,11 @@ eth_phy0: ethernet-phy@3 { /* Micrel KSZ9031 (0x00221620) */ reg = <3>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi b/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi index 0be0f2a5d2..e8f925871e 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi @@ -165,7 +165,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; diff --git a/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi b/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi index ad4d50bd9d..43b11e3dfe 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi @@ -28,10 +28,10 @@ }; }; - usb_vbus: regulator-usb0-vbus { + usb_pwr: regulator-usb-pwrs { compatible = "regulator-fixed"; - regulator-name = "USB0_VBUS"; + regulator-name = "USB_PWR"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -40,20 +40,34 @@ enable-active-high; }; - vcc_3v3: regulator-vcc_3v3 { + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; - regulator-name = "VCC_3V3"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - vcc_1v8: regulator-vcc_1v8 { + vddio_ao18: regulator-vddio_ao18 { compatible = "regulator-fixed"; - regulator-name = "VCC_1V8"; + regulator-name = "VDDIO_AO18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + emmc_pwrseq: emmc-pwrseq { compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; @@ -66,15 +80,32 @@ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ }; + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; + sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>, - <&gpio GPIOX_20 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; clocks = <&wifi32k>; clock-names = "ext_clock"; }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + ðmac { status = "okay"; pinctrl-0 = <ð_rgmii_pins>; @@ -85,10 +116,6 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -97,10 +124,30 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; }; }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; @@ -115,10 +162,15 @@ clock-names = "clkin0"; }; +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + /* Wireless SDIO Module */ &sd_emmc_a { status = "okay"; - pinctrl-0 = <&sdio_pins &sdio_irq_pins>; + pinctrl-0 = <&sdio_pins>; pinctrl-1 = <&sdio_clk_gate_pins>; pinctrl-names = "default", "clk-gate"; #address-cells = <1>; @@ -126,15 +178,15 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; mmc-pwrseq = <&sdio_pwrseq>; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_1v8>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; brcmf: wifi@1 { reg = <1>; @@ -151,12 +203,13 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; - vmmc-supply = <&vcc_3v3>; + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vcc_3v3>; }; /* eMMC */ @@ -176,9 +229,22 @@ mmc-pwrseq = <&emmc_pwrseq>; vmmc-supply = <&vcc_3v3>; - vmmcq-sumpply = <&vcc_1v8>; + vqmmc-supply = <&vddio_boot>; +}; + +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + }; }; +/* This UART is brought out to the DB9 connector */ &uart_AO { status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; @@ -187,7 +253,7 @@ &usb0_phy { status = "okay"; - phy-supply = <&usb_vbus>; + phy-supply = <&usb_pwr>; }; &usb1_phy { diff --git a/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi b/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi index 2d2db783c4..4c539881fb 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb-wetek.dtsi @@ -59,6 +59,13 @@ regulator-max-microvolt = <3300000>; }; + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vcc_3v3: regulator-vcc_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; @@ -130,10 +137,6 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; @@ -142,6 +145,10 @@ eth_phy0: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; }; }; }; @@ -172,6 +179,11 @@ clock-names = "clkin0"; }; +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + /* Wireless SDIO Module */ &sd_emmc_a { status = "okay"; @@ -183,7 +195,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -208,7 +220,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; @@ -237,6 +249,19 @@ vqmmc-supply = <&vddio_boot>; }; +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + }; +}; + /* This UART is brought out to the DB9 connector */ &uart_AO { status = "okay"; diff --git a/dts/src/arm64/amlogic/meson-gxbb.dtsi b/dts/src/arm64/amlogic/meson-gxbb.dtsi index a60d3652be..f734faaf7b 100644 --- a/dts/src/arm64/amlogic/meson-gxbb.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb.dtsi @@ -381,10 +381,15 @@ }; emmc_pins: emmc { - mux { + mux-0 { groups = "emmc_nand_d07", - "emmc_cmd", - "emmc_clk"; + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + }; + + mux-1 { + groups = "emmc_clk"; function = "emmc"; bias-disable; }; @@ -394,7 +399,7 @@ mux { groups = "emmc_ds"; function = "emmc"; - bias-disable; + bias-pull-down; }; }; @@ -436,13 +441,18 @@ }; sdcard_pins: sdcard { - mux { + mux-0 { groups = "sdcard_d0", "sdcard_d1", "sdcard_d2", "sdcard_d3", - "sdcard_cmd", - "sdcard_clk"; + "sdcard_cmd"; + function = "sdcard"; + bias-pull-up; + }; + + mux-1 { + groups = "sdcard_clk"; function = "sdcard"; bias-disable; }; @@ -457,13 +467,18 @@ }; sdio_pins: sdio { - mux { + mux-0 { groups = "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", - "sdio_cmd", - "sdio_clk"; + "sdio_cmd"; + function = "sdio"; + bias-pull-up; + }; + + mux-1 { + groups = "sdio_clk"; function = "sdio"; bias-disable; }; diff --git a/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts b/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts index 70433e023f..3a1484e5b8 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s805x-p241.dts @@ -160,7 +160,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905d-p230.dts b/dts/src/arm64/amlogic/meson-gxl-s905d-p230.dts index 0c8e8305b1..b08c4537f2 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905d-p230.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905d-p230.dts @@ -70,20 +70,21 @@ amlogic,tx-delay-ns = <2>; - /* External PHY reset is shared with internal PHY Led signals */ - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - /* External PHY is in RGMII */ phy-mode = "rgmii"; }; &external_mdio { external_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; + + /* External PHY reset is shared with internal PHY Led signal */ + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; interrupts = <29 IRQ_TYPE_LEVEL_LOW>; eee-broken-1000t; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts index 255cede7b4..4b8ce738e2 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -115,11 +115,13 @@ regulator-max-microvolt = <1800000>; }; + /* This is provided by LDOs on the eMMC daugther card */ vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; }; }; @@ -235,7 +237,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; @@ -253,9 +255,9 @@ bus-width = <8>; cap-mmc-highspeed; - mmc-ddr-3_3v; - max-frequency = <50000000>; - non-removable; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + max-frequency = <200000000>; disable-wp; mmc-pwrseq = <&emmc_pwrseq>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts index 9cbdb85fb5..26907ac829 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -180,7 +180,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi b/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi index bc811a2faf..e3c16f5081 100644 --- a/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dtsi @@ -114,7 +114,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -134,7 +134,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxl.dtsi b/dts/src/arm64/amlogic/meson-gxl.dtsi index 3093ae421b..c959456bac 100644 --- a/dts/src/arm64/amlogic/meson-gxl.dtsi +++ b/dts/src/arm64/amlogic/meson-gxl.dtsi @@ -326,10 +326,15 @@ }; emmc_pins: emmc { - mux { + mux-0 { groups = "emmc_nand_d07", - "emmc_cmd", - "emmc_clk"; + "emmc_cmd"; + function = "emmc"; + bias-pull-up; + }; + + mux-1 { + groups = "emmc_clk"; function = "emmc"; bias-disable; }; @@ -339,7 +344,7 @@ mux { groups = "emmc_ds"; function = "emmc"; - bias-disable; + bias-pull-down; }; }; @@ -381,13 +386,18 @@ }; sdcard_pins: sdcard { - mux { + mux-0 { groups = "sdcard_d0", "sdcard_d1", "sdcard_d2", "sdcard_d3", - "sdcard_cmd", - "sdcard_clk"; + "sdcard_cmd"; + function = "sdcard"; + bias-pull-up; + }; + + mux-1 { + groups = "sdcard_clk"; function = "sdcard"; bias-disable; }; @@ -402,13 +412,18 @@ }; sdio_pins: sdio { - mux { + mux-0 { groups = "sdio_d0", "sdio_d1", "sdio_d2", "sdio_d3", - "sdio_cmd", - "sdio_clk"; + "sdio_cmd"; + function = "sdio"; + bias-pull-up; + }; + + mux-1 { + groups = "sdio_clk"; function = "sdio"; bias-disable; }; diff --git a/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts b/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts index 3f086ed7de..989d33ac6e 100644 --- a/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts +++ b/dts/src/arm64/amlogic/meson-gxm-khadas-vim2.dts @@ -18,7 +18,6 @@ aliases { serial0 = &uart_AO; - serial1 = &uart_A; serial2 = &uart_AO_B; }; @@ -63,11 +62,9 @@ gpio-keys-polled { compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; poll-interval = <100>; - button@0 { + power-button { label = "power"; linux,code = <KEY_POWER>; gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; @@ -242,11 +239,6 @@ amlogic,tx-delay-ns = <2>; - /* External PHY reset is shared with internal PHY Led signals */ - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - /* External PHY is in RGMII */ phy-mode = "rgmii"; @@ -257,6 +249,11 @@ external_phy: ethernet-phy@0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <25 IRQ_TYPE_LEVEL_LOW>; @@ -324,12 +321,13 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; bus-width = <4>; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -349,11 +347,12 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; @@ -366,17 +365,16 @@ &sd_emmc_c { status = "okay"; pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; disable-wp; mmc-ddr-1_8v; mmc-hs200-1_8v; - mmc-hs400-1_8v; mmc-pwrseq = <&emmc_pwrseq>; vmmc-supply = <&vcc_3v3>; @@ -404,8 +402,14 @@ /* This one is connected to the Bluetooth module */ &uart_A { status = "okay"; - pinctrl-0 = <&uart_a_pins>; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; + }; }; /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ diff --git a/dts/src/arm64/amlogic/meson-gxm-nexbox-a1.dts b/dts/src/arm64/amlogic/meson-gxm-nexbox-a1.dts index 25f3b6b140..c2bd4dbbf3 100644 --- a/dts/src/arm64/amlogic/meson-gxm-nexbox-a1.dts +++ b/dts/src/arm64/amlogic/meson-gxm-nexbox-a1.dts @@ -101,19 +101,19 @@ amlogic,tx-delay-ns = <2>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - /* External PHY is in RGMII */ phy-mode = "rgmii"; }; &external_mdio { external_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; }; }; @@ -144,7 +144,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxm-q200.dts b/dts/src/arm64/amlogic/meson-gxm-q200.dts index 73d656e4aa..ea45ae0c71 100644 --- a/dts/src/arm64/amlogic/meson-gxm-q200.dts +++ b/dts/src/arm64/amlogic/meson-gxm-q200.dts @@ -52,20 +52,21 @@ amlogic,tx-delay-ns = <2>; - /* External PHY reset is shared with internal PHY Led signals */ - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - /* External PHY is in RGMII */ phy-mode = "rgmii"; }; &external_mdio { external_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; + + /* External PHY reset is shared with internal PHY Led signal */ + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio_intc>; /* MAC_INTR on GPIOZ_15 */ interrupts = <25 IRQ_TYPE_LEVEL_LOW>; diff --git a/dts/src/arm64/amlogic/meson-gxm-rbox-pro.dts b/dts/src/arm64/amlogic/meson-gxm-rbox-pro.dts index 7fa20a8ede..5cd4d35006 100644 --- a/dts/src/arm64/amlogic/meson-gxm-rbox-pro.dts +++ b/dts/src/arm64/amlogic/meson-gxm-rbox-pro.dts @@ -101,10 +101,6 @@ /* Select external PHY by default */ phy-handle = <&external_phy>; - snps,reset-gpio = <&gpio GPIOZ_14 0>; - snps,reset-delays-us = <0 10000 1000000>; - snps,reset-active-low; - amlogic,tx-delay-ns = <2>; /* External PHY is in RGMII */ @@ -113,9 +109,13 @@ &external_mdio { external_phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; max-speed = <1000>; + + reset-assert-us = <10000>; + reset-deassert-us = <30000>; + reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>; }; }; @@ -143,7 +143,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; non-removable; disable-wp; @@ -167,7 +167,7 @@ bus-width = <4>; cap-sd-highspeed; - max-frequency = <100000000>; + max-frequency = <50000000>; disable-wp; cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; diff --git a/dts/src/arm64/arm/juno-base.dtsi b/dts/src/arm64/arm/juno-base.dtsi index 7446e0dc15..26a039a028 100644 --- a/dts/src/arm64/arm/juno-base.dtsi +++ b/dts/src/arm64/arm/juno-base.dtsi @@ -150,7 +150,7 @@ /* main funnel on Juno r0, cssys0 funnel on Juno r1/r2 as per TRM*/ main_funnel: funnel@20040000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x20040000 0 0x1000>; clocks = <&soc_smc50mhz>; @@ -281,7 +281,7 @@ }; funnel@220c0000 { /* cluster0 funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x220c0000 0 0x1000>; clocks = <&soc_smc50mhz>; @@ -366,7 +366,7 @@ }; funnel@230c0000 { /* cluster1 funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x230c0000 0 0x1000>; clocks = <&soc_smc50mhz>; diff --git a/dts/src/arm64/arm/juno-cs-r1r2.dtsi b/dts/src/arm64/arm/juno-cs-r1r2.dtsi index cf285152de..eda3d9e18a 100644 --- a/dts/src/arm64/arm/juno-cs-r1r2.dtsi +++ b/dts/src/arm64/arm/juno-cs-r1r2.dtsi @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 / { funnel@20130000 { /* cssys1 */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x20130000 0 0x1000>; clocks = <&soc_smc50mhz>; @@ -47,7 +47,7 @@ }; funnel@20150000 { /* cssys2 */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x20150000 0 0x1000>; clocks = <&soc_smc50mhz>; diff --git a/dts/src/arm64/arm/juno-motherboard.dtsi b/dts/src/arm64/arm/juno-motherboard.dtsi index 1792b074e9..9f60dacb4f 100644 --- a/dts/src/arm64/arm/juno-motherboard.dtsi +++ b/dts/src/arm64/arm/juno-motherboard.dtsi @@ -106,7 +106,6 @@ flash@0,00000000 { /* 2 * 32MiB NOR Flash memory mounted on CS0 */ compatible = "arm,vexpress-flash", "cfi-flash"; - linux,part-probe = "afs"; reg = <0 0x00000000 0x04000000>; bank-width = <4>; /* @@ -116,6 +115,9 @@ * flash hardware access is disabled by default. */ status = "disabled"; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; ethernet@2,00000000 { diff --git a/dts/src/arm64/arm/vexpress-v2m-rs1.dtsi b/dts/src/arm64/arm/vexpress-v2m-rs1.dtsi index d3963e9eaf..d6a1fc2692 100644 --- a/dts/src/arm64/arm/vexpress-v2m-rs1.dtsi +++ b/dts/src/arm64/arm/vexpress-v2m-rs1.dtsi @@ -30,11 +30,14 @@ #interrupt-cells = <1>; ranges; - flash@0,00000000 { + nor_flash: flash@0,00000000 { compatible = "arm,vexpress-flash", "cfi-flash"; reg = <0 0x00000000 0x04000000>, <4 0x00000000 0x04000000>; bank-width = <4>; + partitions { + compatible = "arm,arm-firmware-suite"; + }; }; psram@1,00000000 { diff --git a/dts/src/arm64/broadcom/stingray/stingray-usb.dtsi b/dts/src/arm64/broadcom/stingray/stingray-usb.dtsi new file mode 100644 index 0000000000..55259f973b --- /dev/null +++ b/dts/src/arm64/broadcom/stingray/stingray-usb.dtsi @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause) +/* + *Copyright(c) 2018 Broadcom + */ + usb { + compatible = "simple-bus"; + dma-ranges; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x68500000 0x00400000>; + + usbphy0: usb-phy@0 { + compatible = "brcm,sr-usb-combo-phy"; + reg = <0x00000000 0x100>; + #phy-cells = <1>; + status = "disabled"; + }; + + xhci0: usb@1000 { + compatible = "generic-xhci"; + reg = <0x00001000 0x1000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbphy0 1>, <&usbphy0 0>; + phy-names = "phy0", "phy1"; + dma-coherent; + status = "disabled"; + }; + + bdc0: usb@2000 { + compatible = "brcm,bdc-v0.16"; + reg = <0x00002000 0x1000>; + interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbphy0 0>, <&usbphy0 1>; + phy-names = "phy0", "phy1"; + dma-coherent; + status = "disabled"; + }; + + usbphy1: usb-phy@10000 { + compatible = "brcm,sr-usb-combo-phy"; + reg = <0x00010000 0x100>; + #phy-cells = <1>; + status = "disabled"; + }; + + usbphy2: usb-phy@20000 { + compatible = "brcm,sr-usb-hs-phy"; + reg = <0x00020000 0x100>; + #phy-cells = <0>; + status = "disabled"; + }; + + xhci1: usb@11000 { + compatible = "generic-xhci"; + reg = <0x00011000 0x1000>; + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>; + phy-names = "phy0", "phy1", "phy2"; + dma-coherent; + status = "disabled"; + }; + + bdc1: usb@21000 { + compatible = "brcm,bdc-v0.16"; + reg = <0x00021000 0x1000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbphy2>; + phy-names = "phy0"; + dma-coherent; + status = "disabled"; + }; + }; diff --git a/dts/src/arm64/broadcom/stingray/stingray.dtsi b/dts/src/arm64/broadcom/stingray/stingray.dtsi index 35c4670c00..71e2e34400 100644 --- a/dts/src/arm64/broadcom/stingray/stingray.dtsi +++ b/dts/src/arm64/broadcom/stingray/stingray.dtsi @@ -287,6 +287,7 @@ #include "stingray-fs4.dtsi" #include "stingray-sata.dtsi" #include "stingray-pcie.dtsi" + #include "stingray-usb.dtsi" hsls { compatible = "simple-bus"; @@ -612,4 +613,111 @@ status = "disabled"; }; }; + + tmons { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x8f100000 0x100>; + + tmon: tmon@0 { + compatible = "brcm,sr-thermal"; + reg = <0x0 0x40>; + brcm,tmon-mask = <0x3f>; + #thermal-sensor-cells = <1>; + }; + }; + + thermal-zones { + ihost0_thermal: ihost0-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 0>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost1_thermal: ihost1-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 1>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost2_thermal: ihost2-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 2>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + ihost3_thermal: ihost3-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 3>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + crmu_thermal: crmu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 4>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + nitro_thermal: nitro-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + thermal-sensors = <&tmon 5>; + trips { + cpu-crit { + temperature = <105000>; + hysteresis = <0>; + type = "critical"; + }; + }; + }; + }; + + nic-hsls { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x7fffffff>; + + nic_i2c0: i2c@60826100 { + compatible = "brcm,iproc-nic-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x60826100 0x100>, + <0x60e00408 0x1000>; + brcm,ape-hsls-addr-mask = <0x03400000>; + clock-frequency = <100000>; + status = "disabled"; + }; + }; }; diff --git a/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi b/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi index d2de16645e..6f90b0e62c 100644 --- a/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi +++ b/dts/src/arm64/exynos/exynos5433-tm2-common.dtsi @@ -350,6 +350,11 @@ pinctrl-0 = <&te_irq>; }; +&gpu { + mali-supply = <&buck6_reg>; + status = "okay"; +}; + &hdmi { hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>; status = "okay"; diff --git a/dts/src/arm64/exynos/exynos5433.dtsi b/dts/src/arm64/exynos/exynos5433.dtsi index d29d13f469..a76f620f7f 100644 --- a/dts/src/arm64/exynos/exynos5433.dtsi +++ b/dts/src/arm64/exynos/exynos5433.dtsi @@ -249,6 +249,57 @@ }; }; + gpu: gpu@14ac0000 { + compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + reg = <0x14ac0000 0x5000>; + interrupts = <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + clocks = <&cmu_g3d CLK_ACLK_G3D>; + clock-names = "core"; + power-domains = <&pd_g3d>; + operating-points-v2 = <&gpu_opp_table>; + status = "disabled"; + + gpu_opp_table: opp_table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + opp-microvolt = <1000000>; + }; + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-microvolt = <1000000>; + }; + opp-350000000 { + opp-hz = /bits/ 64 <350000000>; + opp-microvolt = <1025000>; + }; + opp-420000000 { + opp-hz = /bits/ 64 <420000000>; + opp-microvolt = <1025000>; + }; + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1075000>; + }; + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-microvolt = <1125000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1150000>; + }; + opp-700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <1150000>; + }; + }; + }; + psci { compatible = "arm,psci"; method = "smc"; diff --git a/dts/src/arm64/exynos/exynos7-espresso.dts b/dts/src/arm64/exynos/exynos7-espresso.dts index 00dd89b92b..080e0f56e1 100644 --- a/dts/src/arm64/exynos/exynos7-espresso.dts +++ b/dts/src/arm64/exynos/exynos7-espresso.dts @@ -59,6 +59,11 @@ clock-frequency = <24000000>; }; +&gpu { + mali-supply = <&buck6_reg>; + status = "okay"; +}; + &serial_2 { status = "okay"; }; diff --git a/dts/src/arm64/exynos/exynos7.dtsi b/dts/src/arm64/exynos/exynos7.dtsi index 077d234789..bcb9d8cee2 100644 --- a/dts/src/arm64/exynos/exynos7.dtsi +++ b/dts/src/arm64/exynos/exynos7.dtsi @@ -78,6 +78,17 @@ }; }; + gpu: gpu@14ac0000 { + compatible = "samsung,exynos5433-mali", "arm,mali-t760"; + reg = <0x14ac0000 0x5000>; + interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "job", "mmu", "gpu"; + status = "disabled"; + /* TODO: operating points for DVFS, cooling device */ + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; diff --git a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts index b359068d96..de6ef39f31 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a-qds.dts +++ b/dts/src/arm64/freescale/fsl-ls1028a-qds.dts @@ -17,6 +17,7 @@ compatible = "fsl,ls1028a-qds", "fsl,ls1028a"; aliases { + crypto = &crypto; gpio0 = &gpio1; gpio1 = &gpio2; gpio2 = &gpio3; @@ -47,6 +48,15 @@ regulator-always-on; }; + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; @@ -117,6 +127,12 @@ #size-cells = <0>; reg = <0x3>; + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + rtc@51 { compatible = "nxp,pcf2129"; reg = <0x51>; @@ -153,3 +169,7 @@ &sai1 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts index f9c272fb07..9fb911317e 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-ls1028a-rdb.dts @@ -16,6 +16,7 @@ compatible = "fsl,ls1028a-rdb", "fsl,ls1028a"; aliases { + crypto = &crypto; serial0 = &duart0; serial1 = &duart1; }; @@ -43,6 +44,15 @@ regulator-always-on; }; + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,format = "i2s"; @@ -115,6 +125,12 @@ #size-cells = <0>; reg = <0x3>; + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + rtc@51 { compatible = "nxp,pcf2129"; reg = <0x51>; @@ -151,3 +167,7 @@ &sai4 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/fsl-ls1028a.dtsi b/dts/src/arm64/freescale/fsl-ls1028a.dtsi index bf7f845447..7975519b4f 100644 --- a/dts/src/arm64/freescale/fsl-ls1028a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1028a.dtsi @@ -70,6 +70,27 @@ clock-output-names = "sysclk"; }; + dpclk: clock-dp { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <27000000>; + clock-output-names= "dpclk"; + }; + + aclk: clock-axi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <650000000>; + clock-output-names= "aclk"; + }; + + pclk: clock-apb { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <650000000>; + clock-output-names= "pclk"; + }; + reboot { compatible ="syscon-reboot"; regmap = <&dcfg>; @@ -285,13 +306,24 @@ #interrupt-cells = <2>; }; - wdog0: watchdog@23c0000 { - compatible = "fsl,ls1028a-wdt", "fsl,imx21-wdt"; - reg = <0x0 0x23c0000 0x0 0x10000>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 1>; - big-endian; - status = "disabled"; + usb0: usb@3100000 { + compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_rxdet_inp3_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + }; + + usb1: usb@3110000 { + compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,dis_rxdet_inp3_quirk; + snps,quirk-frame-length-adjustment = <0x20>; + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; sata: sata@3200000 { @@ -356,6 +388,79 @@ <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; }; + crypto: crypto@8000000 { + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <10>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x8000000 0x100000>; + reg = <0x00 0x8000000 0x0 0x100000>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + qdma: dma-controller@8380000 { + compatible = "fsl,ls1028a-qdma", "fsl,ls1021a-qdma"; + reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */ + <0x0 0x8390000 0x0 0x10000>, /* Status regs */ + <0x0 0x83a0000 0x0 0x40000>; /* Block regs */ + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "qdma-error", "qdma-queue0", + "qdma-queue1", "qdma-queue2", "qdma-queue3"; + dma-channels = <8>; + block-number = <1>; + block-offset = <0x10000>; + fsl,dma-queues = <2>; + status-sizes = <64>; + queue-sizes = <64 64>; + }; + + cluster1_core0_watchdog: watchdog@c000000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc000000 0x0 0x1000>; + clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster1_core1_watchdog: watchdog@c010000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0 0xc010000 0x0 0x1000>; + clocks = <&clockgen 4 15>, <&clockgen 4 15>; + clock-names = "apb_pclk", "wdog_clk"; + }; + sai1: audio-controller@f100000 { #sound-dai-cells = <0>; compatible = "fsl,vf610-sai"; @@ -431,6 +536,29 @@ compatible = "fsl,enetc"; reg = <0x000100 0 0 0 0>; }; + ethernet@0,4 { + compatible = "fsl,enetc-ptp"; + reg = <0x000400 0 0 0 0>; + clocks = <&clockgen 4 0>; + little-endian; + }; + }; + }; + + malidp0: display@f080000 { + compatible = "arm,mali-dp500"; + reg = <0x0 0xf080000 0x0 0x10000>; + interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>, + <0 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "DE", "SE"; + clocks = <&dpclk>, <&aclk>, <&aclk>, <&pclk>; + clock-names = "pxlclk", "mclk", "aclk", "pclk"; + arm,malidp-output-port-lines = /bits/ 8 <8 8 8>; + + port { + dp0_out: endpoint { + + }; }; }; }; diff --git a/dts/src/arm64/freescale/fsl-ls1088a.dtsi b/dts/src/arm64/freescale/fsl-ls1088a.dtsi index 661137ffa3..dacd8cf03a 100644 --- a/dts/src/arm64/freescale/fsl-ls1088a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1088a.dtsi @@ -609,6 +609,14 @@ <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; }; + ptp-timer@8b95000 { + compatible = "fsl,dpaa2-ptp"; + reg = <0x0 0x8b95000 0x0 0x100>; + clocks = <&clockgen 4 0>; + little-endian; + fsl,extts-fifo; + }; + cluster1_core0_watchdog: wdt@c000000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; diff --git a/dts/src/arm64/freescale/fsl-ls208xa.dtsi b/dts/src/arm64/freescale/fsl-ls208xa.dtsi index d7e78dcd15..3ace91945b 100644 --- a/dts/src/arm64/freescale/fsl-ls208xa.dtsi +++ b/dts/src/arm64/freescale/fsl-ls208xa.dtsi @@ -321,6 +321,14 @@ }; }; + ptp-timer@8b95000 { + compatible = "fsl,dpaa2-ptp"; + reg = <0x0 0x8b95000 0x0 0x100>; + clocks = <&clockgen 4 1>; + little-endian; + fsl,extts-fifo; + }; + fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ diff --git a/dts/src/arm64/freescale/fsl-lx2160a.dtsi b/dts/src/arm64/freescale/fsl-lx2160a.dtsi index 125a8cc2c5..e6fdba3945 100644 --- a/dts/src/arm64/freescale/fsl-lx2160a.dtsi +++ b/dts/src/arm64/freescale/fsl-lx2160a.dtsi @@ -848,6 +848,14 @@ dma-coherent; }; + ptp-timer@8b95000 { + compatible = "fsl,dpaa2-ptp"; + reg = <0x0 0x8b95000 0x0 0x100>; + clocks = <&clockgen 4 1>; + little-endian; + fsl,extts-fifo; + }; + fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, diff --git a/dts/src/arm64/freescale/imx8mm-evk.dts b/dts/src/arm64/freescale/imx8mm-evk.dts index 2d5d89475b..ee7f2b2fc1 100644 --- a/dts/src/arm64/freescale/imx8mm-evk.dts +++ b/dts/src/arm64/freescale/imx8mm-evk.dts @@ -37,6 +37,41 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + wm8524: audio-codec { + #sound-dai-cells = <0>; + compatible = "wlf,wm8524"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_wlf>; + wlf,mute-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + }; + + sound-wm8524 { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm8524-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,bitclock-master = <&cpudai>; + simple-audio-card,widgets = + "Line", "Left Line Out Jack", + "Line", "Right Line Out Jack"; + simple-audio-card,routing = + "Left Line Out Jack", "LINEVOUTL", + "Right Line Out Jack", "LINEVOUTR"; + + cpudai: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8524>; + clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; + }; + }; +}; + +&A53_0 { + cpu-supply = <&buck2_reg>; }; &fec1 { @@ -61,6 +96,19 @@ }; }; +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + &uart2 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; @@ -95,6 +143,120 @@ status = "okay"; }; +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@4b { + compatible = "rohm,bd71847"; + reg = <0x4b>; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + }; + + buck2_reg: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + // BUCK5 in datasheet + regulator-name = "BUCK3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + // BUCK6 in datasheet + regulator-name = "BUCK4"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5_reg: BUCK5 { + // BUCK7 in datasheet + regulator-name = "BUCK5"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + // BUCK8 in datasheet + regulator-name = "BUCK6"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "LDO2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "LDO3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + &iomuxc { pinctrl-names = "default"; @@ -124,12 +286,40 @@ >; }; + pinctrl_gpio_wlf: gpiowlfgrp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicirq { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41 + >; + }; + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc { fsl,pins = < MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 >; }; + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + >; + }; + pinctrl_uart2: uart2grp { fsl,pins = < MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 diff --git a/dts/src/arm64/freescale/imx8mm.dtsi b/dts/src/arm64/freescale/imx8mm.dtsi index 6b407a94c0..232a741275 100644 --- a/dts/src/arm64/freescale/imx8mm.dtsi +++ b/dts/src/arm64/freescale/imx8mm.dtsi @@ -53,6 +53,8 @@ enable-method = "psci"; next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; A53_1: cpu@1 { @@ -100,14 +102,23 @@ opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; opp-microvolt = <850000>; + opp-supported-hw = <0xe>, <0x7>; clock-latency-ns = <150000>; }; opp-1600000000 { opp-hz = /bits/ 64 <1600000000>; opp-microvolt = <900000>; + opp-supported-hw = <0xc>, <0x7>; + clock-latency-ns = <150000>; + }; + + opp-1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1000000>; + /* Consumer only but rely on speed grading */ + opp-supported-hw = <0x8>, <0x7>; clock-latency-ns = <150000>; - opp-suspend; }; }; @@ -158,15 +169,6 @@ clock-output-names = "clk_ext4"; }; - gic: interrupt-controller@38800000 { - compatible = "arm,gic-v3"; - reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */ - <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */ - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; - }; - psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -189,7 +191,23 @@ arm,no-tick-in-suspend; }; - soc { + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; + assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; + clock-names = "main_clk"; + }; + + soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -199,13 +217,80 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x30000000 0x30000000 0x400000>; + + sai1: sai@30010000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30010000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI1_IPG>, + <&clk IMX8MM_CLK_SAI1_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai2: sai@30020000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30020000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI2_IPG>, + <&clk IMX8MM_CLK_SAI2_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai3: sai@30030000 { + #sound-dai-cells = <0>; + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30030000 0x10000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI3_IPG>, + <&clk IMX8MM_CLK_SAI3_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai5: sai@30050000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30050000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI5_IPG>, + <&clk IMX8MM_CLK_SAI5_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai6: sai@30060000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30060000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SAI6_IPG>, + <&clk IMX8MM_CLK_SAI6_ROOT>, + <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; gpio1: gpio@30200000 { compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; reg = <0x30200000 0x10000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -217,6 +302,7 @@ reg = <0x30210000 0x10000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -228,6 +314,7 @@ reg = <0x30220000 0x10000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -239,6 +326,7 @@ reg = <0x30230000 0x10000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -250,6 +338,7 @@ reg = <0x30240000 0x10000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -319,6 +408,10 @@ /* For nvmem subnodes */ #address-cells = <1>; #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; anatop: anatop@30360000 { @@ -336,6 +429,8 @@ offset = <0x34>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_SNVS_ROOT>; + clock-names = "snvs-rtc"; }; snvs_pwrkey: snvs-powerkey { @@ -344,6 +439,7 @@ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; linux,keycode = <KEY_POWER>; wakeup-source; + status = "disabled"; }; }; @@ -369,7 +465,7 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x30400000 0x30400000 0x400000>; pwm1: pwm@30660000 { compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm"; @@ -420,7 +516,7 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x30800000 0x30800000 0x400000>; ecspi1: spi@30820000 { compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi"; @@ -639,7 +735,7 @@ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges; + ranges = <0x32c00000 0x32c00000 0x400000>; usbotg1: usb@32e40000 { compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; @@ -656,14 +752,6 @@ status = "disabled"; }; - usbphynop1: usbphynop1 { - compatible = "usb-nop-xceiv"; - clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; - clock-names = "main_clk"; - }; - usbmisc1: usbmisc@32e40200 { compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; #index-cells = <1>; @@ -685,14 +773,6 @@ status = "disabled"; }; - usbphynop2: usbphynop2 { - compatible = "usb-nop-xceiv"; - clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>; - assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>; - clock-names = "main_clk"; - }; - usbmisc2: usbmisc@32e50200 { compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; #index-cells = <1>; @@ -729,5 +809,14 @@ dma-names = "rx-tx"; status = "disabled"; }; + + gic: interrupt-controller@38800000 { + compatible = "arm,gic-v3"; + reg = <0x38800000 0x10000>, /* GIC Dist */ + <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; }; }; diff --git a/dts/src/arm64/freescale/imx8mn-pinfunc.h b/dts/src/arm64/freescale/imx8mn-pinfunc.h new file mode 100644 index 0000000000..faf1e69e74 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mn-pinfunc.h @@ -0,0 +1,646 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2018-2019 NXP + */ + +#ifndef __DTS_IMX8MN_PINFUNC_H +#define __DTS_IMX8MN_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ + +#define MX8MN_IOMUXC_BOOT_MODE2_CCMSRCGPCMIX_BOOT_MODE2 0x020 0x25C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_BOOT_MODE2_I2C1_SCL 0x020 0x25C 0x55C 0x1 0x3 +#define MX8MN_IOMUXC_BOOT_MODE3_CCMSRCGPCMIX_BOOT_MODE3 0x024 0x260 0x000 0x0 0x0 +#define MX8MN_IOMUXC_BOOT_MODE3_I2C1_SDA 0x024 0x260 0x56C 0x1 0x3 +#define MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x02C 0x294 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT 0x02C 0x294 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO01_ANAMIX_REF_CLK_24M 0x02C 0x294 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO01_CCMSRCGPCMIX_EXT_CLK2 0x02C 0x294 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO02_GPIO1_IO2 0x030 0x298 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x030 0x298 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_ANY 0x030 0x298 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x034 0x29C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO03_USDHC1_VSELECT 0x034 0x29C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO03_SDMA1_EXT_EVENT0 0x034 0x29C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO03_ANAMIX_XTAL_OK 0x034 0x29C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO04_GPIO1_IO4 0x038 0x2A0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x038 0x2A0 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO04_SDMA1_EXT_EVENT1 0x038 0x2A0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO04_ANAMIX_XTAL_OK_LV 0x038 0x2A0 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x03C 0x2A4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO05_M4_NMI 0x03C 0x2A4 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_PMIC_READY 0x03C 0x2A4 0x4BC 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO05_CCMSRCGPCMIX_INT_BOOT 0x03C 0x2A4 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x040 0x2A8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO06_ENET1_MDC 0x040 0x2A8 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO06_USDHC1_CD_B 0x040 0x2A8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO06_CCMSRCGPCMIX_EXT_CLK3 0x040 0x2A8 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x044 0x2AC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO07_ENET1_MDIO 0x044 0x2AC 0x4C0 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO07_USDHC1_WP 0x044 0x2AC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO07_CCMSRCGPCMIX_EXT_CLK4 0x044 0x2AC 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x048 0x2B0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO08_ENET1_1588_EVENT0_IN 0x048 0x2B0 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO08_PWM1_OUT 0x048 0x2B0 0x000 0x2 0x0 +#define MX8MN_IOMUXC_GPIO1_IO08_USDHC2_RESET_B 0x048 0x2B0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO08_CCMSRCGPCMIX_WAIT 0x048 0x2B0 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x04C 0x2B4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_ENET1_1588_EVENT0_OUT 0x04C 0x2B4 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_PWM2_OUT 0x04C 0x2B4 0x000 0x2 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_USDHC3_RESET_B 0x04C 0x2B4 0x000 0x4 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_SDMA2_EXT_EVENT0 0x04C 0x2B4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO09_CCMSRCGPCMIX_STOP 0x04C 0x2B4 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x050 0x2B8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO10_USB1_OTG_ID 0x050 0x2B8 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO10_PWM3_OUT 0x050 0x2B8 0x000 0x2 0x0 +#define MX8MN_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x054 0x2BC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO11_PWM2_OUT 0x054 0x2BC 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO11_USDHC3_VSELECT 0x054 0x2BC 0x000 0x4 0x0 +#define MX8MN_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_PMIC_READY 0x054 0x2BC 0x4BC 0x5 0x1 +#define MX8MN_IOMUXC_GPIO1_IO11_CCMSRCGPCMIX_OUT0 0x054 0x2BC 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x058 0x2C0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x058 0x2C0 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO12_SDMA2_EXT_EVENT1 0x058 0x2C0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO12_CCMSRCGPCMIX_OUT1 0x058 0x2C0 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x05C 0x2C4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x05C 0x2C4 0x000 0x1 0x0 +#define MX8MN_IOMUXC_GPIO1_IO13_PWM2_OUT 0x05C 0x2C4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO13_CCMSRCGPCMIX_OUT2 0x05C 0x2C4 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x060 0x2C8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO14_USDHC3_CD_B 0x060 0x2C8 0x598 0x4 0x2 +#define MX8MN_IOMUXC_GPIO1_IO14_PWM3_OUT 0x060 0x2C8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x060 0x2C8 0x000 0x6 0x0 +#define MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x064 0x2CC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_GPIO1_IO15_USDHC3_WP 0x064 0x2CC 0x5B8 0x4 0x2 +#define MX8MN_IOMUXC_GPIO1_IO15_PWM4_OUT 0x064 0x2CC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x064 0x2CC 0x000 0x6 0x0 +#define MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x068 0x2D0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_MDC_SAI6_TX_DATA0 0x068 0x2D0 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_MDC_PDM_BIT_STREAM3 0x068 0x2D0 0x540 0x3 0x1 +#define MX8MN_IOMUXC_ENET_MDC_SPDIF1_OUT 0x068 0x2D0 0x000 0x4 0x0 +#define MX8MN_IOMUXC_ENET_MDC_GPIO1_IO16 0x068 0x2D0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_MDC_USDHC3_STROBE 0x068 0x2D0 0x59C 0x6 0x1 +#define MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x06C 0x2D4 0x4C0 0x0 0x1 +#define MX8MN_IOMUXC_ENET_MDIO_SAI6_TX_SYNC 0x06C 0x2D4 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_MDIO_PDM_BIT_STREAM2 0x06C 0x2D4 0x53C 0x3 0x1 +#define MX8MN_IOMUXC_ENET_MDIO_SPDIF1_IN 0x06C 0x2D4 0x5CC 0x4 0x1 +#define MX8MN_IOMUXC_ENET_MDIO_GPIO1_IO17 0x06C 0x2D4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_MDIO_USDHC3_DATA5 0x06C 0x2D4 0x550 0x6 0x1 +#define MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x070 0x2D8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TD3_SAI6_TX_BCLK 0x070 0x2D8 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TD3_PDM_BIT_STREAM1 0x070 0x2D8 0x538 0x3 0x1 +#define MX8MN_IOMUXC_ENET_TD3_SPDIF1_EXT_CLK 0x070 0x2D8 0x568 0x4 0x1 +#define MX8MN_IOMUXC_ENET_TD3_GPIO1_IO18 0x070 0x2D8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TD3_USDHC3_DATA6 0x070 0x2D8 0x584 0x6 0x1 +#define MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x074 0x2DC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x074 0x2DC 0x5A4 0x1 0x0 +#define MX8MN_IOMUXC_ENET_TD2_CCMSRCGPCMIX_ENET_REF_CLK_ROOT 0x074 0x2DC 0x5A4 0x1 0x0 +#define MX8MN_IOMUXC_ENET_TD2_SAI6_RX_DATA0 0x074 0x2DC 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TD2_PDM_BIT_STREAM3 0x074 0x2DC 0x540 0x3 0x2 +#define MX8MN_IOMUXC_ENET_TD2_GPIO1_IO19 0x074 0x2DC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TD2_USDHC3_DATA7 0x074 0x2DC 0x54C 0x6 0x1 +#define MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x078 0x2E0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TD1_SAI6_RX_SYNC 0x078 0x2E0 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TD1_PDM_BIT_STREAM2 0x078 0x2E0 0x53C 0x3 0x2 +#define MX8MN_IOMUXC_ENET_TD1_GPIO1_IO20 0x078 0x2E0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TD1_USDHC3_CD_B 0x078 0x2E0 0x598 0x6 0x3 +#define MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x07C 0x2E4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TD0_SAI6_RX_BCLK 0x07C 0x2E4 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TD0_PDM_BIT_STREAM1 0x07C 0x2E4 0x538 0x3 0x2 +#define MX8MN_IOMUXC_ENET_TD0_GPIO1_IO21 0x07C 0x2E4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TD0_USDHC3_WP 0x07C 0x2E4 0x5B8 0x6 0x3 +#define MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x080 0x2E8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TX_CTL_SAI6_MCLK 0x080 0x2E8 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TX_CTL_GPIO1_IO22 0x080 0x2E8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TX_CTL_USDHC3_DATA0 0x080 0x2E8 0x5B4 0x6 0x1 +#define MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x084 0x2EC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_TXC_ENET1_TX_ER 0x084 0x2EC 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ENET_TXC_SAI7_TX_DATA0 0x084 0x2EC 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_TXC_GPIO1_IO23 0x084 0x2EC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_TXC_USDHC3_DATA1 0x084 0x2EC 0x5B0 0x6 0x1 +#define MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x088 0x2F0 0x574 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RX_CTL_SAI7_TX_SYNC 0x088 0x2F0 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RX_CTL_PDM_BIT_STREAM3 0x088 0x2F0 0x540 0x3 0x3 +#define MX8MN_IOMUXC_ENET_RX_CTL_GPIO1_IO24 0x088 0x2F0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RX_CTL_USDHC3_DATA2 0x088 0x2F0 0x5E4 0x6 0x1 +#define MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x08C 0x2F4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RXC_ENET1_RX_ER 0x08C 0x2F4 0x5C8 0x1 0x0 +#define MX8MN_IOMUXC_ENET_RXC_SAI7_TX_BCLK 0x08C 0x2F4 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RXC_PDM_BIT_STREAM2 0x08C 0x2F4 0x53C 0x3 0x3 +#define MX8MN_IOMUXC_ENET_RXC_GPIO1_IO25 0x08C 0x2F4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RXC_USDHC3_DATA3 0x08C 0x2F4 0x5E0 0x6 0x1 +#define MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x090 0x2F8 0x57C 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RD0_SAI7_RX_DATA0 0x090 0x2F8 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RD0_PDM_BIT_STREAM1 0x090 0x2F8 0x538 0x3 0x3 +#define MX8MN_IOMUXC_ENET_RD0_GPIO1_IO26 0x090 0x2F8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RD0_USDHC3_DATA4 0x090 0x2F8 0x558 0x6 0x1 +#define MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x094 0x2FC 0x554 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RD1_SAI7_RX_SYNC 0x094 0x2FC 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RD1_PDM_BIT_STREAM0 0x094 0x2FC 0x534 0x3 0x1 +#define MX8MN_IOMUXC_ENET_RD1_GPIO1_IO27 0x094 0x2FC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RD1_USDHC3_RESET_B 0x094 0x2FC 0x000 0x6 0x0 +#define MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x098 0x300 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RD2_SAI7_RX_BCLK 0x098 0x300 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RD2_PDM_CLK 0x098 0x300 0x000 0x3 0x0 +#define MX8MN_IOMUXC_ENET_RD2_GPIO1_IO28 0x098 0x300 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RD2_USDHC3_CLK 0x098 0x300 0x5A0 0x6 0x1 +#define MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x09C 0x304 0x000 0x0 0x0 +#define MX8MN_IOMUXC_ENET_RD3_SAI7_MCLK 0x09C 0x304 0x000 0x2 0x0 +#define MX8MN_IOMUXC_ENET_RD3_SPDIF1_IN 0x09C 0x304 0x5CC 0x3 0x5 +#define MX8MN_IOMUXC_ENET_RD3_GPIO1_IO29 0x09C 0x304 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ENET_RD3_USDHC3_CMD 0x09C 0x304 0x5DC 0x6 0x1 +#define MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK 0x0A0 0x308 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_CLK_ENET1_MDC 0x0A0 0x308 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD1_CLK_UART1_DCE_TX 0x0A0 0x308 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_CLK_UART1_DTE_RX 0x0A0 0x308 0x4F4 0x4 0x4 +#define MX8MN_IOMUXC_SD1_CLK_GPIO2_IO0 0x0A0 0x308 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_CMD_USDHC1_CMD 0x0A4 0x30C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_CMD_ENET1_MDIO 0x0A4 0x30C 0x4C0 0x1 0x3 +#define MX8MN_IOMUXC_SD1_CMD_UART1_DCE_RX 0x0A4 0x30C 0x4F4 0x4 0x5 +#define MX8MN_IOMUXC_SD1_CMD_UART1_DTE_TX 0x0A4 0x30C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_CMD_GPIO2_IO1 0x0A4 0x30C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x0A8 0x310 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA0_ENET1_RGMII_TD1 0x0A8 0x310 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD1_DATA0_UART1_DCE_RTS_B 0x0A8 0x310 0x4F0 0x4 0x4 +#define MX8MN_IOMUXC_SD1_DATA0_UART1_DTE_CTS_B 0x0A8 0x310 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA0_GPIO2_IO2 0x0A8 0x310 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x0AC 0x314 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA1_ENET1_RGMII_TD0 0x0AC 0x314 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD1_DATA1_UART1_DCE_CTS_B 0x0AC 0x314 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA1_UART1_DTE_RTS_B 0x0AC 0x314 0x4F0 0x4 0x5 +#define MX8MN_IOMUXC_SD1_DATA1_GPIO2_IO3 0x0AC 0x314 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x0B0 0x318 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA2_ENET1_RGMII_RD0 0x0B0 0x318 0x57C 0x1 0x1 +#define MX8MN_IOMUXC_SD1_DATA2_UART2_DCE_TX 0x0B0 0x318 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA2_UART2_DTE_RX 0x0B0 0x318 0x4FC 0x4 0x4 +#define MX8MN_IOMUXC_SD1_DATA2_GPIO2_IO4 0x0B0 0x318 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x0B4 0x31C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA3_ENET1_RGMII_RD1 0x0B4 0x31C 0x554 0x1 0x1 +#define MX8MN_IOMUXC_SD1_DATA3_UART2_DCE_RX 0x0B4 0x31C 0x4FC 0x4 0x5 +#define MX8MN_IOMUXC_SD1_DATA3_UART2_DTE_TX 0x0B4 0x31C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA3_GPIO2_IO5 0x0B4 0x31C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x0B8 0x320 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA4_ENET1_RGMII_TX_CTL 0x0B8 0x320 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD1_DATA4_I2C1_SCL 0x0B8 0x320 0x55C 0x3 0x1 +#define MX8MN_IOMUXC_SD1_DATA4_UART2_DCE_RTS_B 0x0B8 0x320 0x4F8 0x4 0x4 +#define MX8MN_IOMUXC_SD1_DATA4_UART2_DTE_CTS_B 0x0B8 0x320 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA4_GPIO2_IO6 0x0B8 0x320 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x0BC 0x324 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA5_ENET1_TX_ER 0x0BC 0x324 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD1_DATA5_I2C1_SDA 0x0BC 0x324 0x56C 0x3 0x1 +#define MX8MN_IOMUXC_SD1_DATA5_UART2_DCE_CTS_B 0x0BC 0x324 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA5_UART2_DTE_RTS_B 0x0BC 0x324 0x4F8 0x4 0x5 +#define MX8MN_IOMUXC_SD1_DATA5_GPIO2_IO7 0x0BC 0x324 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x0C0 0x328 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA6_ENET1_RGMII_RX_CTL 0x0C0 0x328 0x574 0x1 0x1 +#define MX8MN_IOMUXC_SD1_DATA6_I2C2_SCL 0x0C0 0x328 0x5D0 0x3 0x1 +#define MX8MN_IOMUXC_SD1_DATA6_UART3_DCE_TX 0x0C0 0x328 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA6_UART3_DTE_RX 0x0C0 0x328 0x504 0x4 0x4 +#define MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8 0x0C0 0x328 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x0C4 0x32C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_DATA7_ENET1_RX_ER 0x0C4 0x32C 0x5C8 0x1 0x1 +#define MX8MN_IOMUXC_SD1_DATA7_I2C2_SDA 0x0C4 0x32C 0x560 0x3 0x1 +#define MX8MN_IOMUXC_SD1_DATA7_UART3_DCE_RX 0x0C4 0x32C 0x504 0x4 0x5 +#define MX8MN_IOMUXC_SD1_DATA7_UART3_DTE_TX 0x0C4 0x32C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_DATA7_GPIO2_IO9 0x0C4 0x32C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x0C8 0x330 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_RESET_B_ENET1_TX_CLK 0x0C8 0x330 0x5A4 0x1 0x1 +#define MX8MN_IOMUXC_SD1_RESET_B_CCMSRCGPCMIX_ENET_REF_CLK_ROOT 0x0C8 0x330 0x5A4 0x1 0x0 +#define MX8MN_IOMUXC_SD1_RESET_B_I2C3_SCL 0x0C8 0x330 0x588 0x3 0x1 +#define MX8MN_IOMUXC_SD1_RESET_B_UART3_DCE_RTS_B 0x0C8 0x330 0x500 0x4 0x2 +#define MX8MN_IOMUXC_SD1_RESET_B_UART3_DTE_CTS_B 0x0C8 0x330 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x0C8 0x330 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x0CC 0x334 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD1_STROBE_I2C3_SDA 0x0CC 0x334 0x5BC 0x3 0x1 +#define MX8MN_IOMUXC_SD1_STROBE_UART3_DCE_CTS_B 0x0CC 0x334 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD1_STROBE_UART3_DTE_RTS_B 0x0CC 0x334 0x500 0x4 0x3 +#define MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x0CC 0x334 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x0D0 0x338 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_CD_B_GPIO2_IO12 0x0D0 0x338 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_CD_B_CCMSRCGPCMIX_TESTER_ACK 0x0D0 0x338 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x0D4 0x33C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_CLK_SAI5_RX_SYNC 0x0D4 0x33C 0x4E4 0x1 0x1 +#define MX8MN_IOMUXC_SD2_CLK_ECSPI2_SCLK 0x0D4 0x33C 0x580 0x2 0x1 +#define MX8MN_IOMUXC_SD2_CLK_UART4_DCE_RX 0x0D4 0x33C 0x50C 0x3 0x4 +#define MX8MN_IOMUXC_SD2_CLK_UART4_DTE_TX 0x0D4 0x33C 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SD2_CLK_SAI5_MCLK 0x0D4 0x33C 0x594 0x4 0x1 +#define MX8MN_IOMUXC_SD2_CLK_GPIO2_IO13 0x0D4 0x33C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_CLK_CCMSRCGPCMIX_OBSERVE0 0x0D4 0x33C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x0D8 0x340 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_CMD_SAI5_RX_BCLK 0x0D8 0x340 0x4D0 0x1 0x1 +#define MX8MN_IOMUXC_SD2_CMD_ECSPI2_MOSI 0x0D8 0x340 0x590 0x2 0x1 +#define MX8MN_IOMUXC_SD2_CMD_UART4_DCE_TX 0x0D8 0x340 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SD2_CMD_UART4_DTE_RX 0x0D8 0x340 0x50C 0x3 0x5 +#define MX8MN_IOMUXC_SD2_CMD_PDM_CLK 0x0D8 0x340 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SD2_CMD_GPIO2_IO14 0x0D8 0x340 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_CMD_CCMSRCGPCMIX_OBSERVE1 0x0D8 0x340 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x0DC 0x344 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_DATA0_SAI5_RX_DATA0 0x0DC 0x344 0x4D4 0x1 0x1 +#define MX8MN_IOMUXC_SD2_DATA0_I2C4_SDA 0x0DC 0x344 0x58C 0x2 0x1 +#define MX8MN_IOMUXC_SD2_DATA0_UART2_DCE_RX 0x0DC 0x344 0x4FC 0x3 0x6 +#define MX8MN_IOMUXC_SD2_DATA0_UART2_DTE_TX 0x0DC 0x344 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SD2_DATA0_PDM_BIT_STREAM0 0x0DC 0x344 0x534 0x4 0x2 +#define MX8MN_IOMUXC_SD2_DATA0_GPIO2_IO15 0x0DC 0x344 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_DATA0_CCMSRCGPCMIX_OBSERVE2 0x0DC 0x344 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x0E0 0x348 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_DATA1_SAI5_TX_SYNC 0x0E0 0x348 0x4EC 0x1 0x1 +#define MX8MN_IOMUXC_SD2_DATA1_I2C4_SCL 0x0E0 0x348 0x5D4 0x2 0x1 +#define MX8MN_IOMUXC_SD2_DATA1_UART2_DCE_TX 0x0E0 0x348 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SD2_DATA1_UART2_DTE_RX 0x0E0 0x348 0x4FC 0x3 0x7 +#define MX8MN_IOMUXC_SD2_DATA1_PDM_BIT_STREAM1 0x0E0 0x348 0x538 0x4 0x4 +#define MX8MN_IOMUXC_SD2_DATA1_GPIO2_IO16 0x0E0 0x348 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_DATA1_CCMSRCGPCMIX_WAIT 0x0E0 0x348 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x0E4 0x34C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_DATA2_SAI5_TX_BCLK 0x0E4 0x34C 0x4E8 0x1 0x1 +#define MX8MN_IOMUXC_SD2_DATA2_ECSPI2_SS0 0x0E4 0x34C 0x570 0x2 0x2 +#define MX8MN_IOMUXC_SD2_DATA2_SPDIF1_OUT 0x0E4 0x34C 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SD2_DATA2_PDM_BIT_STREAM2 0x0E4 0x34C 0x53C 0x4 0x4 +#define MX8MN_IOMUXC_SD2_DATA2_GPIO2_IO17 0x0E4 0x34C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_DATA2_CCMSRCGPCMIX_STOP 0x0E4 0x34C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x0E8 0x350 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_DATA3_SAI5_TX_DATA0 0x0E8 0x350 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SD2_DATA3_ECSPI2_MISO 0x0E8 0x350 0x578 0x2 0x1 +#define MX8MN_IOMUXC_SD2_DATA3_SPDIF1_IN 0x0E8 0x350 0x5CC 0x3 0x2 +#define MX8MN_IOMUXC_SD2_DATA3_PDM_BIT_STREAM3 0x0E8 0x350 0x540 0x4 0x4 +#define MX8MN_IOMUXC_SD2_DATA3_GPIO2_IO18 0x0E8 0x350 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_DATA3_CCMSRCGPCMIX_EARLY_RESET 0x0E8 0x350 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_RESET_B_USDHC2_RESET_B 0x0EC 0x354 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x0EC 0x354 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_RESET_B_CCMSRCGPCMIX_SYSTEM_RESET 0x0EC 0x354 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SD2_WP_USDHC2_WP 0x0F0 0x358 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SD2_WP_GPIO2_IO20 0x0F0 0x358 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SD2_WP_CORESIGHT_EVENTI 0x0F0 0x358 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_ALE_RAWNAND_ALE 0x0F4 0x35C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x0F4 0x35C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_ALE_PDM_BIT_STREAM0 0x0F4 0x35C 0x534 0x3 0x3 +#define MX8MN_IOMUXC_NAND_ALE_UART3_DCE_RX 0x0F4 0x35C 0x504 0x4 0x6 +#define MX8MN_IOMUXC_NAND_ALE_UART3_DTE_TX 0x0F4 0x35C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_NAND_ALE_GPIO3_IO0 0x0F4 0x35C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_ALE_CORESIGHT_TRACE_CLK 0x0F4 0x35C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_CE0_B_RAWNAND_CE0_B 0x0F8 0x360 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x0F8 0x360 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_CE0_B_PDM_BIT_STREAM1 0x0F8 0x360 0x538 0x3 0x5 +#define MX8MN_IOMUXC_NAND_CE0_B_UART3_DCE_TX 0x0F8 0x360 0x000 0x4 0x0 +#define MX8MN_IOMUXC_NAND_CE0_B_UART3_DTE_RX 0x0F8 0x360 0x504 0x4 0x7 +#define MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x0F8 0x360 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_CE0_B_CORESIGHT_TRACE_CTL 0x0F8 0x360 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_CE1_B_RAWNAND_CE1_B 0x0FC 0x364 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B 0x0FC 0x364 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x0FC 0x364 0x59C 0x2 0x0 +#define MX8MN_IOMUXC_NAND_CE1_B_PDM_BIT_STREAM0 0x0FC 0x364 0x534 0x3 0x4 +#define MX8MN_IOMUXC_NAND_CE1_B_I2C4_SCL 0x0FC 0x364 0x5D4 0x4 0x2 +#define MX8MN_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x0FC 0x364 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_CE1_B_CORESIGHT_TRACE0 0x0FC 0x364 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_CE2_B_RAWNAND_CE2_B 0x100 0x368 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_CE2_B_QSPI_B_SS0_B 0x100 0x368 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x100 0x368 0x550 0x2 0x0 +#define MX8MN_IOMUXC_NAND_CE2_B_PDM_BIT_STREAM1 0x100 0x368 0x538 0x3 0x6 +#define MX8MN_IOMUXC_NAND_CE2_B_I2C4_SDA 0x100 0x368 0x58C 0x4 0x2 +#define MX8MN_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x100 0x368 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_CE2_B_CORESIGHT_TRACE1 0x100 0x368 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_CE3_B_RAWNAND_CE3_B 0x104 0x36C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_CE3_B_QSPI_B_SS1_B 0x104 0x36C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x104 0x36C 0x584 0x2 0x0 +#define MX8MN_IOMUXC_NAND_CE3_B_PDM_BIT_STREAM2 0x104 0x36C 0x53C 0x3 0x5 +#define MX8MN_IOMUXC_NAND_CE3_B_I2C3_SDA 0x104 0x36C 0x5BC 0x4 0x2 +#define MX8MN_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x104 0x36C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_CE3_B_CORESIGHT_TRACE2 0x104 0x36C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_CLE_RAWNAND_CLE 0x108 0x370 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_CLE_QSPI_B_SCLK 0x108 0x370 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x108 0x370 0x54C 0x2 0x0 +#define MX8MN_IOMUXC_NAND_CLE_GPIO3_IO5 0x108 0x370 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_CLE_CORESIGHT_TRACE3 0x108 0x370 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA00_RAWNAND_DATA00 0x10C 0x374 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x10C 0x374 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA00_PDM_BIT_STREAM2 0x10C 0x374 0x53C 0x3 0x6 +#define MX8MN_IOMUXC_NAND_DATA00_UART4_DCE_RX 0x10C 0x374 0x50C 0x4 0x6 +#define MX8MN_IOMUXC_NAND_DATA00_UART4_DTE_TX 0x10C 0x374 0x000 0x4 0x0 +#define MX8MN_IOMUXC_NAND_DATA00_GPIO3_IO6 0x10C 0x374 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA00_CORESIGHT_TRACE4 0x10C 0x374 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA01_RAWNAND_DATA01 0x110 0x378 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x110 0x378 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA01_PDM_BIT_STREAM3 0x110 0x378 0x540 0x3 0x5 +#define MX8MN_IOMUXC_NAND_DATA01_UART4_DCE_TX 0x110 0x378 0x000 0x4 0x0 +#define MX8MN_IOMUXC_NAND_DATA01_UART4_DTE_RX 0x110 0x378 0x50C 0x4 0x7 +#define MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7 0x110 0x378 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA01_CORESIGHT_TRACE5 0x110 0x378 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA02_RAWNAND_DATA02 0x114 0x37C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x114 0x37C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA02_USDHC3_CD_B 0x114 0x37C 0x598 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA02_I2C4_SDA 0x114 0x37C 0x58C 0x4 0x3 +#define MX8MN_IOMUXC_NAND_DATA02_GPIO3_IO8 0x114 0x37C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA02_CORESIGHT_TRACE6 0x114 0x37C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA03_RAWNAND_DATA03 0x118 0x380 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x118 0x380 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA03_USDHC3_WP 0x118 0x380 0x5B8 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA03_GPIO3_IO9 0x118 0x380 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA03_CORESIGHT_TRACE7 0x118 0x380 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA04_RAWNAND_DATA04 0x11C 0x384 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA04_QSPI_B_DATA0 0x11C 0x384 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x11C 0x384 0x5B4 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA04_GPIO3_IO10 0x11C 0x384 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA04_CORESIGHT_TRACE8 0x11C 0x384 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA05_RAWNAND_DATA05 0x120 0x388 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA05_QSPI_B_DATA1 0x120 0x388 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x120 0x388 0x5B0 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA05_GPIO3_IO11 0x120 0x388 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA05_CORESIGHT_TRACE9 0x120 0x388 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA06_RAWNAND_DATA06 0x124 0x38C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA06_QSPI_B_DATA2 0x124 0x38C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x124 0x38C 0x5E4 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA06_GPIO3_IO12 0x124 0x38C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA06_CORESIGHT_TRACE10 0x124 0x38C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DATA07_RAWNAND_DATA07 0x128 0x390 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DATA07_QSPI_B_DATA3 0x128 0x390 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x128 0x390 0x5E0 0x2 0x0 +#define MX8MN_IOMUXC_NAND_DATA07_GPIO3_IO13 0x128 0x390 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DATA07_CORESIGHT_TRACE11 0x128 0x390 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_DQS_RAWNAND_DQS 0x12C 0x394 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_DQS_QSPI_A_DQS 0x12C 0x394 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_DQS_PDM_CLK 0x12C 0x394 0x000 0x3 0x0 +#define MX8MN_IOMUXC_NAND_DQS_I2C3_SCL 0x12C 0x394 0x588 0x4 0x2 +#define MX8MN_IOMUXC_NAND_DQS_GPIO3_IO14 0x12C 0x394 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_DQS_CORESIGHT_TRACE12 0x12C 0x394 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_RE_B_RAWNAND_RE_B 0x130 0x398 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_RE_B_QSPI_B_DQS 0x130 0x398 0x000 0x1 0x0 +#define MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x130 0x398 0x558 0x2 0x0 +#define MX8MN_IOMUXC_NAND_RE_B_PDM_BIT_STREAM1 0x130 0x398 0x538 0x3 0x7 +#define MX8MN_IOMUXC_NAND_RE_B_GPIO3_IO15 0x130 0x398 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_RE_B_CORESIGHT_TRACE13 0x130 0x398 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_READY_B_RAWNAND_READY_B 0x134 0x39C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_READY_B_USDHC3_RESET_B 0x134 0x39C 0x000 0x2 0x0 +#define MX8MN_IOMUXC_NAND_READY_B_PDM_BIT_STREAM3 0x134 0x39C 0x540 0x3 0x6 +#define MX8MN_IOMUXC_NAND_READY_B_I2C3_SCL 0x134 0x39C 0x588 0x4 0x3 +#define MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16 0x134 0x39C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_READY_B_CORESIGHT_TRACE14 0x134 0x39C 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_WE_B_RAWNAND_WE_B 0x138 0x3A0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x138 0x3A0 0x5A0 0x2 0x0 +#define MX8MN_IOMUXC_NAND_WE_B_I2C3_SDA 0x138 0x3A0 0x5BC 0x4 0x3 +#define MX8MN_IOMUXC_NAND_WE_B_GPIO3_IO17 0x138 0x3A0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_WE_B_CORESIGHT_TRACE15 0x138 0x3A0 0x000 0x6 0x0 +#define MX8MN_IOMUXC_NAND_WP_B_RAWNAND_WP_B 0x13C 0x3A4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x13C 0x3A4 0x5DC 0x2 0x0 +#define MX8MN_IOMUXC_NAND_WP_B_I2C4_SDA 0x13C 0x3A4 0x58C 0x4 0x4 +#define MX8MN_IOMUXC_NAND_WP_B_GPIO3_IO18 0x13C 0x3A4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_NAND_WP_B_CORESIGHT_EVENTO 0x13C 0x3A4 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC 0x140 0x3A8 0x4E4 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x140 0x3A8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_RXC_SAI5_RX_BCLK 0x144 0x3AC 0x4D0 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXC_PDM_CLK 0x144 0x3AC 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI5_RXC_GPIO3_IO20 0x144 0x3AC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0 0x148 0x3B0 0x4D4 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXD0_PDM_BIT_STREAM0 0x148 0x3B0 0x534 0x4 0x0 +#define MX8MN_IOMUXC_SAI5_RXD0_GPIO3_IO21 0x148 0x3B0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1 0x14C 0x3B4 0x4D8 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0x14C 0x3B4 0x4EC 0x3 0x0 +#define MX8MN_IOMUXC_SAI5_RXD1_PDM_BIT_STREAM1 0x14C 0x3B4 0x538 0x4 0x0 +#define MX8MN_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x14C 0x3B4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2 0x150 0x3B8 0x4DC 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0x150 0x3B8 0x4E8 0x3 0x0 +#define MX8MN_IOMUXC_SAI5_RXD2_PDM_BIT_STREAM2 0x150 0x3B8 0x53C 0x4 0x0 +#define MX8MN_IOMUXC_SAI5_RXD2_GPIO3_IO23 0x150 0x3B8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3 0x154 0x3BC 0x4E0 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0x154 0x3BC 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI5_RXD3_PDM_BIT_STREAM3 0x154 0x3BC 0x540 0x4 0x0 +#define MX8MN_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x154 0x3BC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI5_MCLK_SAI5_MCLK 0x158 0x3C0 0x594 0x0 0x0 +#define MX8MN_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x158 0x3C0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC 0x1B0 0x418 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC 0x1B0 0x418 0x4EC 0x1 0x2 +#define MX8MN_IOMUXC_SAI2_RXFS_SAI5_TX_DATA1 0x1B0 0x418 0x000 0x2 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_SAI2_RX_DATA1 0x1B0 0x418 0x5AC 0x3 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x1B0 0x418 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_UART1_DTE_RX 0x1B0 0x418 0x4F4 0x4 0x2 +#define MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x1B0 0x418 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_RXFS_PDM_BIT_STREAM2 0x1B0 0x418 0x53C 0x6 0x7 +#define MX8MN_IOMUXC_SAI2_RXC_SAI2_RX_BCLK 0x1B4 0x41C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_RXC_SAI5_TX_BCLK 0x1B4 0x41C 0x4E8 0x1 0x2 +#define MX8MN_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x1B4 0x41C 0x4F4 0x4 0x3 +#define MX8MN_IOMUXC_SAI2_RXC_UART1_DTE_TX 0x1B4 0x41C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x1B4 0x41C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_RXC_PDM_BIT_STREAM1 0x1B4 0x41C 0x538 0x6 0x8 +#define MX8MN_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0x1B8 0x420 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_RXD0_SAI5_TX_DATA0 0x1B8 0x420 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI2_RXD0_SAI2_TX_DATA1 0x1B8 0x420 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x1B8 0x420 0x4F0 0x4 0x2 +#define MX8MN_IOMUXC_SAI2_RXD0_UART1_DTE_CTS_B 0x1B8 0x420 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI2_RXD0_GPIO4_IO23 0x1B8 0x420 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_RXD0_PDM_BIT_STREAM3 0x1B8 0x420 0x540 0x6 0x7 +#define MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC 0x1BC 0x424 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_TXFS_SAI5_TX_DATA1 0x1BC 0x424 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI2_TXFS_SAI2_TX_DATA1 0x1BC 0x424 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x1BC 0x424 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI2_TXFS_UART1_DTE_RTS_B 0x1BC 0x424 0x4F0 0x4 0x3 +#define MX8MN_IOMUXC_SAI2_TXFS_GPIO4_IO24 0x1BC 0x424 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_TXFS_PDM_BIT_STREAM2 0x1BC 0x424 0x53C 0x6 0x8 +#define MX8MN_IOMUXC_SAI2_TXC_SAI2_TX_BCLK 0x1C0 0x428 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_TXC_SAI5_TX_DATA2 0x1C0 0x428 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI2_TXC_GPIO4_IO25 0x1C0 0x428 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_TXC_PDM_BIT_STREAM1 0x1C0 0x428 0x538 0x6 0x9 +#define MX8MN_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0 0x1C4 0x42C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_TXD0_SAI5_TX_DATA3 0x1C4 0x42C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI2_TXD0_GPIO4_IO26 0x1C4 0x42C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_TXD0_CCMSRCGPCMIX_BOOT_MODE4 0x1C4 0x42C 0x540 0x6 0x8 +#define MX8MN_IOMUXC_SAI2_MCLK_SAI2_MCLK 0x1C8 0x430 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI2_MCLK_SAI5_MCLK 0x1C8 0x430 0x594 0x1 0x2 +#define MX8MN_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x1C8 0x430 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI2_MCLK_SAI3_MCLK 0x1C8 0x430 0x5C0 0x6 0x1 +#define MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC 0x1CC 0x434 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_RXFS_GPT1_CAPTURE1 0x1CC 0x434 0x5F0 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_RXFS_SAI5_RX_SYNC 0x1CC 0x434 0x4E4 0x2 0x2 +#define MX8MN_IOMUXC_SAI3_RXFS_SAI3_RX_DATA1 0x1CC 0x434 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI3_RXFS_SPDIF1_IN 0x1CC 0x434 0x5CC 0x4 0x3 +#define MX8MN_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x1CC 0x434 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_RXFS_PDM_BIT_STREAM0 0x1CC 0x434 0x534 0x6 0x5 +#define MX8MN_IOMUXC_SAI3_RXC_SAI3_RX_BCLK 0x1D0 0x438 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_RXC_GPT1_CLK 0x1D0 0x438 0x5E8 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_RXC_SAI5_RX_BCLK 0x1D0 0x438 0x4D0 0x2 0x2 +#define MX8MN_IOMUXC_SAI3_RXC_SAI2_RX_DATA1 0x1D0 0x438 0x5AC 0x3 0x2 +#define MX8MN_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x1D0 0x438 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI3_RXC_UART2_DTE_RTS_B 0x1D0 0x438 0x4F8 0x4 0x2 +#define MX8MN_IOMUXC_SAI3_RXC_GPIO4_IO29 0x1D0 0x438 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_RXC_PDM_CLK 0x1D0 0x438 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_SAI3_RX_DATA0 0x1D4 0x43C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_GPT1_COMPARE1 0x1D4 0x43C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_SAI5_RX_DATA0 0x1D4 0x43C 0x4D4 0x2 0x2 +#define MX8MN_IOMUXC_SAI3_RXD_SAI3_TX_DATA1 0x1D4 0x43C 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x1D4 0x43C 0x4F8 0x4 0x3 +#define MX8MN_IOMUXC_SAI3_RXD_UART2_DTE_CTS_B 0x1D4 0x43C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_GPIO4_IO30 0x1D4 0x43C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_RXD_PDM_BIT_STREAM1 0x1D4 0x43C 0x538 0x6 0x10 +#define MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0x1D8 0x440 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_TXFS_GPT1_CAPTURE2 0x1D8 0x440 0x5EC 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_TXFS_SAI5_RX_DATA1 0x1D8 0x440 0x4D8 0x2 0x1 +#define MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_DATA1 0x1D8 0x440 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x1D8 0x440 0x4FC 0x4 0x2 +#define MX8MN_IOMUXC_SAI3_TXFS_UART2_DTE_TX 0x1D8 0x440 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x1D8 0x440 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_TXFS_PDM_BIT_STREAM3 0x1D8 0x440 0x540 0x6 0x9 +#define MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0x1DC 0x444 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_TXC_GPT1_COMPARE2 0x1DC 0x444 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_TXC_SAI5_RX_DATA2 0x1DC 0x444 0x4DC 0x2 0x1 +#define MX8MN_IOMUXC_SAI3_TXC_SAI2_TX_DATA1 0x1DC 0x444 0x000 0x3 0x0 +#define MX8MN_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x1DC 0x444 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI3_TXC_UART2_DTE_RX 0x1DC 0x444 0x4FC 0x4 0x3 +#define MX8MN_IOMUXC_SAI3_TXC_GPIO5_IO0 0x1DC 0x444 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_TXC_PDM_BIT_STREAM2 0x1DC 0x444 0x53C 0x6 0x9 +#define MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0x1E0 0x448 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_TXD_GPT1_COMPARE3 0x1E0 0x448 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_TXD_SAI5_RX_DATA3 0x1E0 0x448 0x4E0 0x2 0x1 +#define MX8MN_IOMUXC_SAI3_TXD_SPDIF1_EXT_CLK 0x1E0 0x448 0x568 0x4 0x2 +#define MX8MN_IOMUXC_SAI3_TXD_GPIO5_IO1 0x1E0 0x448 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_TXD_CCMSRCGPCMIX_BOOT_MODE5 0x1E0 0x448 0x000 0x6 0x0 +#define MX8MN_IOMUXC_SAI3_MCLK_SAI3_MCLK 0x1E4 0x44C 0x5C0 0x0 0x0 +#define MX8MN_IOMUXC_SAI3_MCLK_PWM4_OUT 0x1E4 0x44C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SAI3_MCLK_SAI5_MCLK 0x1E4 0x44C 0x594 0x2 0x3 +#define MX8MN_IOMUXC_SAI3_MCLK_SPDIF1_OUT 0x1E4 0x44C 0x000 0x4 0x0 +#define MX8MN_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x1E4 0x44C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SAI3_MCLK_SPDIF1_IN 0x1E4 0x44C 0x5CC 0x6 0x4 +#define MX8MN_IOMUXC_SPDIF_TX_SPDIF1_OUT 0x1E8 0x450 0x000 0x0 0x0 +#define MX8MN_IOMUXC_SPDIF_TX_PWM3_OUT 0x1E8 0x450 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SPDIF_TX_GPIO5_IO3 0x1E8 0x450 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SPDIF_RX_SPDIF1_IN 0x1EC 0x454 0x5CC 0x0 0x0 +#define MX8MN_IOMUXC_SPDIF_RX_PWM2_OUT 0x1EC 0x454 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SPDIF_RX_GPIO5_IO4 0x1EC 0x454 0x000 0x5 0x0 +#define MX8MN_IOMUXC_SPDIF_EXT_CLK_SPDIF1_EXT_CLK 0x1F0 0x458 0x568 0x0 0x0 +#define MX8MN_IOMUXC_SPDIF_EXT_CLK_PWM1_OUT 0x1F0 0x458 0x000 0x1 0x0 +#define MX8MN_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x1F0 0x458 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x1F4 0x45C 0x5D8 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX 0x1F4 0x45C 0x504 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_SCLK_UART3_DTE_TX 0x1F4 0x45C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_SCLK_I2C1_SCL 0x1F4 0x45C 0x55C 0x2 0x2 +#define MX8MN_IOMUXC_ECSPI1_SCLK_SAI5_RX_SYNC 0x1F4 0x45C 0x4DC 0x3 0x2 +#define MX8MN_IOMUXC_ECSPI1_SCLK_GPIO5_IO6 0x1F4 0x45C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x1F8 0x460 0x5A8 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX 0x1F8 0x460 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_MOSI_UART3_DTE_RX 0x1F8 0x460 0x504 0x1 0x1 +#define MX8MN_IOMUXC_ECSPI1_MOSI_I2C1_SDA 0x1F8 0x460 0x56C 0x2 0x2 +#define MX8MN_IOMUXC_ECSPI1_MOSI_SAI5_RX_BCLK 0x1F8 0x460 0x4D0 0x3 0x3 +#define MX8MN_IOMUXC_ECSPI1_MOSI_GPIO5_IO7 0x1F8 0x460 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x1FC 0x464 0x5C4 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B 0x1FC 0x464 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_MISO_UART3_DTE_RTS_B 0x1FC 0x464 0x500 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_MISO_I2C2_SCL 0x1FC 0x464 0x5D0 0x2 0x2 +#define MX8MN_IOMUXC_ECSPI1_MISO_SAI5_RX_DATA0 0x1FC 0x464 0x4D4 0x3 0x3 +#define MX8MN_IOMUXC_ECSPI1_MISO_GPIO5_IO8 0x1FC 0x464 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI1_SS0_ECSPI1_SS0 0x200 0x468 0x564 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B 0x200 0x468 0x500 0x1 0x1 +#define MX8MN_IOMUXC_ECSPI1_SS0_UART3_DTE_CTS_B 0x200 0x468 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI1_SS0_I2C2_SDA 0x200 0x468 0x560 0x2 0x2 +#define MX8MN_IOMUXC_ECSPI1_SS0_SAI5_RX_DATA1 0x200 0x468 0x4D8 0x3 0x2 +#define MX8MN_IOMUXC_ECSPI1_SS0_SAI5_TX_SYNC 0x200 0x468 0x4EC 0x4 0x3 +#define MX8MN_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x200 0x468 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x204 0x46C 0x580 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x204 0x46C 0x50C 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_SCLK_UART4_DTE_TX 0x204 0x46C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_SCLK_I2C3_SCL 0x204 0x46C 0x588 0x2 0x4 +#define MX8MN_IOMUXC_ECSPI2_SCLK_SAI5_RX_DATA2 0x204 0x46C 0x000 0x3 0x0 +#define MX8MN_IOMUXC_ECSPI2_SCLK_SAI5_TX_BCLK 0x204 0x46C 0x4E8 0x4 0x3 +#define MX8MN_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x204 0x46C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x208 0x470 0x590 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x208 0x470 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_MOSI_UART4_DTE_RX 0x208 0x470 0x50C 0x1 0x1 +#define MX8MN_IOMUXC_ECSPI2_MOSI_I2C3_SDA 0x208 0x470 0x5BC 0x2 0x4 +#define MX8MN_IOMUXC_ECSPI2_MOSI_SAI5_RX_DATA3 0x208 0x470 0x4E0 0x3 0x2 +#define MX8MN_IOMUXC_ECSPI2_MOSI_SAI5_TX_DATA0 0x208 0x470 0x000 0x4 0x0 +#define MX8MN_IOMUXC_ECSPI2_MOSI_GPIO5_IO11 0x208 0x470 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x20C 0x474 0x578 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x20C 0x474 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_MISO_UART4_DTE_RTS_B 0x20C 0x474 0x508 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_MISO_I2C4_SCL 0x20C 0x474 0x5D4 0x2 0x3 +#define MX8MN_IOMUXC_ECSPI2_MISO_SAI5_MCLK 0x20C 0x474 0x594 0x3 0x4 +#define MX8MN_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x20C 0x474 0x000 0x5 0x0 +#define MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0 0x210 0x478 0x570 0x0 0x0 +#define MX8MN_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x210 0x478 0x508 0x1 0x1 +#define MX8MN_IOMUXC_ECSPI2_SS0_UART4_DTE_CTS_B 0x210 0x478 0x000 0x1 0x0 +#define MX8MN_IOMUXC_ECSPI2_SS0_I2C4_SDA 0x210 0x478 0x58C 0x2 0x5 +#define MX8MN_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x210 0x478 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x214 0x47C 0x55C 0x0 0x0 +#define MX8MN_IOMUXC_I2C1_SCL_ENET1_MDC 0x214 0x47C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C1_SCL_ECSPI1_SCLK 0x214 0x47C 0x5D8 0x3 0x1 +#define MX8MN_IOMUXC_I2C1_SCL_GPIO5_IO14 0x214 0x47C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x218 0x480 0x56C 0x0 0x0 +#define MX8MN_IOMUXC_I2C1_SDA_ENET1_MDIO 0x218 0x480 0x4C0 0x1 0x2 +#define MX8MN_IOMUXC_I2C1_SDA_ECSPI1_MOSI 0x218 0x480 0x5A8 0x3 0x1 +#define MX8MN_IOMUXC_I2C1_SDA_GPIO5_IO15 0x218 0x480 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL 0x21C 0x484 0x5D0 0x0 0x0 +#define MX8MN_IOMUXC_I2C2_SCL_ENET1_1588_EVENT1_IN 0x21C 0x484 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C2_SCL_USDHC3_CD_B 0x21C 0x484 0x598 0x2 0x1 +#define MX8MN_IOMUXC_I2C2_SCL_ECSPI1_MISO 0x21C 0x484 0x5C4 0x3 0x1 +#define MX8MN_IOMUXC_I2C2_SCL_GPIO5_IO16 0x21C 0x484 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA 0x220 0x488 0x560 0x0 0x0 +#define MX8MN_IOMUXC_I2C2_SDA_ENET1_1588_EVENT1_OUT 0x220 0x488 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C2_SDA_USDHC3_WP 0x220 0x488 0x5B8 0x2 0x1 +#define MX8MN_IOMUXC_I2C2_SDA_ECSPI1_SS0 0x220 0x488 0x564 0x3 0x1 +#define MX8MN_IOMUXC_I2C2_SDA_GPIO5_IO17 0x220 0x488 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C3_SCL_I2C3_SCL 0x224 0x48C 0x588 0x0 0x0 +#define MX8MN_IOMUXC_I2C3_SCL_PWM4_OUT 0x224 0x48C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C3_SCL_GPT2_CLK 0x224 0x48C 0x000 0x2 0x0 +#define MX8MN_IOMUXC_I2C3_SCL_ECSPI2_SCLK 0x224 0x48C 0x580 0x3 0x2 +#define MX8MN_IOMUXC_I2C3_SCL_GPIO5_IO18 0x224 0x48C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C3_SDA_I2C3_SDA 0x228 0x490 0x5BC 0x0 0x0 +#define MX8MN_IOMUXC_I2C3_SDA_PWM3_OUT 0x228 0x490 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C3_SDA_GPT3_CLK 0x228 0x490 0x000 0x2 0x0 +#define MX8MN_IOMUXC_I2C3_SDA_ECSPI2_MOSI 0x228 0x490 0x590 0x3 0x2 +#define MX8MN_IOMUXC_I2C3_SDA_GPIO5_IO19 0x228 0x490 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C4_SCL_I2C4_SCL 0x22C 0x494 0x5D4 0x0 0x0 +#define MX8MN_IOMUXC_I2C4_SCL_PWM2_OUT 0x22C 0x494 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C4_SCL_ECSPI2_MISO 0x22C 0x494 0x578 0x3 0x2 +#define MX8MN_IOMUXC_I2C4_SCL_GPIO5_IO20 0x22C 0x494 0x000 0x5 0x0 +#define MX8MN_IOMUXC_I2C4_SDA_I2C4_SDA 0x230 0x498 0x58C 0x0 0x0 +#define MX8MN_IOMUXC_I2C4_SDA_PWM1_OUT 0x230 0x498 0x000 0x1 0x0 +#define MX8MN_IOMUXC_I2C4_SDA_ECSPI2_SS0 0x230 0x498 0x570 0x3 0x1 +#define MX8MN_IOMUXC_I2C4_SDA_GPIO5_IO21 0x230 0x498 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART1_RXD_UART1_DCE_RX 0x234 0x49C 0x4F4 0x0 0x0 +#define MX8MN_IOMUXC_UART1_RXD_UART1_DTE_TX 0x234 0x49C 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x234 0x49C 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART1_RXD_GPIO5_IO22 0x234 0x49C 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART1_TXD_UART1_DCE_TX 0x238 0x4A0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART1_TXD_UART1_DTE_RX 0x238 0x4A0 0x4F4 0x0 0x1 +#define MX8MN_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x238 0x4A0 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART1_TXD_GPIO5_IO23 0x238 0x4A0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x23C 0x4A4 0x4FC 0x0 0x0 +#define MX8MN_IOMUXC_UART2_RXD_UART2_DTE_TX 0x23C 0x4A4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART2_RXD_ECSPI3_MISO 0x23C 0x4A4 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART2_RXD_GPT1_COMPARE3 0x23C 0x4A4 0x000 0x3 0x0 +#define MX8MN_IOMUXC_UART2_RXD_GPIO5_IO24 0x23C 0x4A4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x240 0x4A8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART2_TXD_UART2_DTE_RX 0x240 0x4A8 0x4FC 0x0 0x1 +#define MX8MN_IOMUXC_UART2_TXD_ECSPI3_SS0 0x240 0x4A8 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART2_TXD_GPT1_COMPARE2 0x240 0x4A8 0x000 0x3 0x0 +#define MX8MN_IOMUXC_UART2_TXD_GPIO5_IO25 0x240 0x4A8 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART3_RXD_UART3_DCE_RX 0x244 0x4AC 0x504 0x0 0x2 +#define MX8MN_IOMUXC_UART3_RXD_UART3_DTE_TX 0x244 0x4AC 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x244 0x4AC 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART3_RXD_UART1_DTE_RTS_B 0x244 0x4AC 0x4F0 0x1 0x0 +#define MX8MN_IOMUXC_UART3_RXD_USDHC3_RESET_B 0x244 0x4AC 0x000 0x2 0x0 +#define MX8MN_IOMUXC_UART3_RXD_GPT1_CAPTURE2 0x244 0x4AC 0x5EC 0x3 0x1 +#define MX8MN_IOMUXC_UART3_RXD_GPIO5_IO26 0x244 0x4AC 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART3_TXD_UART3_DCE_TX 0x248 0x4B0 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART3_TXD_UART3_DTE_RX 0x248 0x4B0 0x504 0x0 0x3 +#define MX8MN_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x248 0x4B0 0x4F0 0x1 0x1 +#define MX8MN_IOMUXC_UART3_TXD_UART1_DTE_CTS_B 0x248 0x4B0 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART3_TXD_USDHC3_VSELECT 0x248 0x4B0 0x000 0x2 0x0 +#define MX8MN_IOMUXC_UART3_TXD_GPT1_CLK 0x248 0x4B0 0x5E8 0x3 0x1 +#define MX8MN_IOMUXC_UART3_TXD_GPIO5_IO27 0x248 0x4B0 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART4_RXD_UART4_DCE_RX 0x24C 0x4B4 0x50C 0x0 0x2 +#define MX8MN_IOMUXC_UART4_RXD_UART4_DTE_TX 0x24C 0x4B4 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x24C 0x4B4 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART4_RXD_UART2_DTE_RTS_B 0x24C 0x4B4 0x4F8 0x1 0x0 +#define MX8MN_IOMUXC_UART4_RXD_GPT1_COMPARE1 0x24C 0x4B4 0x000 0x3 0x0 +#define MX8MN_IOMUXC_UART4_RXD_GPIO5_IO28 0x24C 0x4B4 0x000 0x5 0x0 +#define MX8MN_IOMUXC_UART4_TXD_UART4_DCE_TX 0x250 0x4B8 0x000 0x0 0x0 +#define MX8MN_IOMUXC_UART4_TXD_UART4_DTE_RX 0x250 0x4B8 0x50C 0x0 0x3 +#define MX8MN_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x250 0x4B8 0x4F8 0x1 0x1 +#define MX8MN_IOMUXC_UART4_TXD_UART2_DTE_CTS_B 0x250 0x4B8 0x000 0x1 0x0 +#define MX8MN_IOMUXC_UART4_TXD_GPT1_CAPTURE1 0x250 0x4B8 0x5F0 0x3 0x1 +#define MX8MN_IOMUXC_UART4_TXD_GPIO5_IO29 0x250 0x4B8 0x000 0x5 0x0 + +#endif /* __DTS_IMX8MN_PINFUNC_H */ diff --git a/dts/src/arm64/freescale/imx8mq-evk.dts b/dts/src/arm64/freescale/imx8mq-evk.dts index b2038be8bb..e3df9b8cd9 100644 --- a/dts/src/arm64/freescale/imx8mq-evk.dts +++ b/dts/src/arm64/freescale/imx8mq-evk.dts @@ -242,6 +242,10 @@ power-supply = <&sw1a_reg>; }; +&snvs_pwrkey { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts b/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts new file mode 100644 index 0000000000..5179e22f51 --- /dev/null +++ b/dts/src/arm64/freescale/imx8mq-librem5-devkit.dts @@ -0,0 +1,809 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2018-2019 Purism SPC + */ + +/dts-v1/; + +#include "dt-bindings/input/input.h" +#include "dt-bindings/pwm/pwm.h" +#include "dt-bindings/usb/pd.h" +#include "imx8mq.dtsi" + +/ { + model = "Purism Librem 5 devkit"; + compatible = "purism,librem5-devkit", "fsl,imx8mq"; + + backlight_dsi: backlight-dsi { + compatible = "pwm-backlight"; + /* 200 Hz for the PAM2841 */ + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 100>; + num-interpolated-steps = <100>; + /* Default brightness level (index into the array defined by */ + /* the "brightness-levels" property) */ + default-brightness-level = <0>; + power-supply = <®_22v4_p>; + }; + + chosen { + stdout-path = &uart1; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + btn1 { + label = "VOL_UP"; + gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <KEY_VOLUMEUP>; + }; + + btn2 { + label = "VOL_DOWN"; + gpios = <&gpio4 22 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <KEY_VOLUMEDOWN>; + }; + + hp-det { + label = "HP_DET"; + gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + wakeup-source; + linux,code = <KEY_HP>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led1 { + label = "LED 1"; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pmic_osc: clock-pmic { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "pmic_osc"; + }; + + reg_1v8_p: regulator-1v8-p { + compatible = "regulator-fixed"; + regulator-name = "1v8_p"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <®_pwr_en>; + }; + + reg_2v8_p: regulator-2v8-p { + compatible = "regulator-fixed"; + regulator-name = "2v8_p"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <®_pwr_en>; + }; + + reg_3v3_p: regulator-3v3-p { + compatible = "regulator-fixed"; + regulator-name = "3v3_p"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <®_pwr_en>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + reg_5v_p: regulator-5v-p { + compatible = "regulator-fixed"; + regulator-name = "5v_p"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_pwr_en>; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + reg_22v4_p: regulator-22v4-p { + compatible = "regulator-fixed"; + regulator-name = "22v4_P"; + regulator-min-microvolt = <22400000>; + regulator-max-microvolt = <22400000>; + vin-supply = <®_pwr_en>; + }; + + reg_pwr_en: regulator-pwr-en { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwr_en>; + regulator-name = "PWR_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usdhc2_vmmc: regulator-usdhc2-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_pwr>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + vibrator { + compatible = "gpio-vibrator"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_haptic>; + enable-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>; + vcc-supply = <®_3v3_p>; + }; + + wifi_pwr_en: regulator-wifi-en { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wifi_pwr_en>; + regulator-name = "WIFI_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; +}; + +&clk { + assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL2>; + assigned-clock-rates = <786432000>, <722534400>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + fsl,magic-packet; + phy-supply = <®_3v3_p>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pmic@4b { + compatible = "rohm,bd71837"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + clocks = <&pmic_osc>; + clock-names = "osc"; + clock-output-names = "pmic_clk"; + interrupt-parent = <&gpio1>; + interrupts = <3 GPIO_ACTIVE_LOW>; + interrupt-names = "irq"; + rohm,reset-snvs-powered; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <900000>; + rohm,dvs-idle-voltage = <850000>; + rohm,dvs-suspend-voltage = <800000>; + }; + + buck2_reg: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1000000>; + rohm,dvs-idle-voltage = <900000>; + }; + + buck3_reg: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + regulator-boot-on; + rohm,dvs-run-voltage = <1000000>; + }; + + buck4_reg: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1300000>; + rohm,dvs-run-voltage = <1000000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <1605000>; + regulator-max-microvolt = <1995000>; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "buck8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + /* leave on for snvs power button */ + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + /* leave on for snvs power button */ + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "ldo6"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + + typec_ptn5100: usb_typec@52 { + compatible = "nxp,ptn5110"; + reg = <0x52>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + interrupt-parent = <&gpio3>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 2000, + PDO_FIXED_USB_COMM | + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_DATA_SWAP )>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM | + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_DATA_SWAP ) + PDO_VAR(5000, 3000, 3000)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + usb_con_hs: endpoint { + remote-endpoint = <&typec_hs>; + }; + }; + + port@1 { + reg = <1>; + + usb_con_ss: endpoint { + remote-endpoint = <&typec_ss>; + }; + }; + }; + }; + }; + + rtc@68 { + compatible = "microcrystal,rv4162"; + reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + interrupt-parent = <&gpio4>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + }; + + charger@6b { /* bq25896 */ + compatible = "ti,bq25890"; + reg = <0x6b>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger>; + interrupt-parent = <&gpio3>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + ti,battery-regulation-voltage = <4192000>; /* 4.192V */ + ti,charge-current = <1600000>; /* 1.6A */ + ti,termination-current = <66000>; /* 66mA */ + ti,precharge-current = <130000>; /* 130mA */ + ti,minimum-sys-voltage = <3000000>; /* 3V */ + ti,boost-voltage = <5000000>; /* 5V */ + ti,boost-max-current = <50000>; /* 50mA */ + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + magnetometer@1e { + compatible = "st,lsm9ds1-magn"; + reg = <0x1e>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imu>; + interrupt-parent = <&gpio3>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <®_3v3_p>; + vddio-supply = <®_3v3_p>; + }; + + touchscreen@5d { + compatible = "goodix,gt5688"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ts>; + interrupt-parent = <&gpio3>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + irq-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + AVDD28-supply = <®_2v8_p>; + VDDIO-supply = <®_1v8_p>; + }; +}; + +&iomuxc { + pinctrl_bl: blgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO01_PWM1_OUT 0x6 /* DSI_BL_PWM */ + >; + }; + + pinctrl_bt: btgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x16 /* nBT_DISABLE */ + MX8MQ_IOMUXC_NAND_DATA01_GPIO3_IO7 0x10 /* BT_HOST_WAKE */ + >; + }; + + pinctrl_charger: chargergrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x80 /* CHRG_nINT */ + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MQ_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MQ_IOMUXC_GPIO1_IO15_CCMSRCGPCMIX_CLKO2 0x1f + >; + }; + + pinctrl_ts: tsgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x16 /* TOUCH INT */ + MX8MQ_IOMUXC_GPIO1_IO05_GPIO1_IO5 0x19 /* TOUCH RST */ + >; + }; + + pinctrl_gpio_leds: gpioledgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x16 + >; + }; + + pinctrl_gpio_keys: gpiokeygrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x16 + MX8MQ_IOMUXC_SAI2_RXC_GPIO4_IO22 0x16 + MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x180 /* HP_DET */ + >; + }; + + pinctrl_haptic: hapticgrp { + fsl,pins = < + MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4 0xc6 /* nHAPTIC */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000001f + MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000001f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000001f + MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000001f + >; + }; + + pinctrl_imu: imugrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI5_RXFS_GPIO3_IO19 0x8 /* IMU_INT */ + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x80 /* PMIC intr */ + >; + }; + + pinctrl_pwr_en: pwrengrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x06 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX8MQ_IOMUXC_SAI3_RXC_GPIO4_IO29 0x80 /* RTC intr */ + >; + }; + + pinctrl_typec: typecgrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x16 + MX8MQ_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x80 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 + MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49 + MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49 + MX8MQ_IOMUXC_UART4_RXD_UART2_DCE_CTS_B 0x49 + MX8MQ_IOMUXC_UART4_TXD_UART2_DCE_RTS_B 0x49 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MQ_IOMUXC_UART3_RXD_UART3_DCE_RX 0x49 + MX8MQ_IOMUXC_UART3_TXD_UART3_DCE_TX 0x49 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MQ_IOMUXC_ECSPI2_SCLK_UART4_DCE_RX 0x49 + MX8MQ_IOMUXC_ECSPI2_MOSI_UART4_DCE_TX 0x49 + MX8MQ_IOMUXC_ECSPI2_MISO_UART4_DCE_CTS_B 0x49 + MX8MQ_IOMUXC_ECSPI2_SS0_UART4_DCE_RTS_B 0x49 + MX8MQ_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x49 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3 + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3 + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3 + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3 + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3 + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3 + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3 + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3 + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3 + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83 + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f + MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf + MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf + MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf + MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf + MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf + MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf + MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf + MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf + MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf + MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f + MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1 + >; + }; + + pinctrl_usdhc2_pwr: usdhc2grppwr { + fsl,pins = < + MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2grpgpio { + fsl,pins = < + MX8MQ_IOMUXC_SD2_WP_GPIO2_IO20 0x80 /* WIFI_WAKE */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83 + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3 + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3 + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3 + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3 + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcd + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcd + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcd + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f + MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf + MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcf + MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xcf + MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xcf + MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xcf + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; + + pinctrl_wifi_pwr_en: wifipwrengrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x06 + >; + }; + + pinctrl_wwan: wwangrp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_CE3_B_GPIO3_IO4 0x09 /* nWWAN_DISABLE */ + MX8MQ_IOMUXC_NAND_DATA02_GPIO3_IO8 0x80 /* nWoWWAN */ + MX8MQ_IOMUXC_NAND_DATA03_GPIO3_IO9 0x19 /* WWAN_RESET */ + >; + }; +}; + +&pgc_gpu { + power-supply = <&buck3_reg>; +}; + +&pgc_vpu { + power-supply = <&buck4_reg>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bl>; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart1 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { /* GNSS */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&uart4 { /* BT */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_bt>; + uart-has-rtscts; + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3_phy1 { + vbus-supply = <®_5v_p>; + status = "okay"; +}; + +&usb_dwc3_0 { + #address-cells = <1>; + #size-cells = <0>; + dr_mode = "otg"; + status = "okay"; + + port@0 { + reg = <0>; + + typec_hs: endpoint { + remote-endpoint = <&usb_con_hs>; + }; + }; + + port@1 { + reg = <1>; + + typec_ss: endpoint { + remote-endpoint = <&usb_con_ss>; + }; + }; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + bus-width = <4>; + vmmc-supply = <®_usdhc2_vmmc>; + power-supply = <&wifi_pwr_en>; + non-removable; + disable-wp; + cap-sdio-irq; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/dts/src/arm64/freescale/imx8mq.dtsi b/dts/src/arm64/freescale/imx8mq.dtsi index 6d635ba090..d09b808eff 100644 --- a/dts/src/arm64/freescale/imx8mq.dtsi +++ b/dts/src/arm64/freescale/imx8mq.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/power/imx8mq-power.h> #include <dt-bindings/reset/imx8mq-reset.h> #include <dt-bindings/gpio/gpio.h> +#include "dt-bindings/input/input.h" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/thermal/thermal.h> #include "imx8mq-pinfunc.h" @@ -19,6 +20,11 @@ #size-cells = <2>; aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; @@ -95,6 +101,8 @@ next-level-cache = <&A53_L2>; operating-points-v2 = <&a53_opp_table>; #cooling-cells = <2>; + nvmem-cells = <&cpu_speed_grade>; + nvmem-cell-names = "speed_grade"; }; A53_1: cpu@1 { @@ -145,14 +153,32 @@ opp-800000000 { opp-hz = /bits/ 64 <800000000>; opp-microvolt = <900000>; + /* Industrial only */ + opp-supported-hw = <0xf>, <0x4>; + clock-latency-ns = <150000>; + }; + + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <900000>; + /* Consumer only */ + opp-supported-hw = <0xe>, <0x3>; clock-latency-ns = <150000>; }; opp-1300000000 { opp-hz = /bits/ 64 <1300000000>; opp-microvolt = <1000000>; + opp-supported-hw = <0xc>, <0x7>; + clock-latency-ns = <150000>; + }; + + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1000000>; + /* Consumer only but rely on speed grading */ + opp-supported-hw = <0x8>, <0x7>; clock-latency-ns = <150000>; - opp-suspend; }; }; @@ -415,6 +441,10 @@ clocks = <&clk IMX8MQ_CLK_OCOTP_ROOT>; #address-cells = <1>; #size-cells = <1>; + + cpu_speed_grade: speed-grade@10 { + reg = <0x10 4>; + }; }; anatop: syscon@30360000 { @@ -433,8 +463,18 @@ offset = <0x34>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_SNVS_ROOT>; + clock-names = "snvs-rtc"; }; + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + status = "disabled"; + }; }; clk: clock-controller@30380000 { @@ -815,6 +855,25 @@ }; }; + bus@32c00000 { /* AIPS4 */ + compatible = "fsl,imx8mq-aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x32c00000 0x32c00000 0x400000>; + + irqsteer: interrupt-controller@32e2d000 { + compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer"; + reg = <0x32e2d000 0x1000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>; + clock-names = "ipg"; + fsl,channel = <0>; + fsl,num-irqs = <64>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + gpu: gpu@38000000 { compatible = "vivante,gc"; reg = <0x38000000 0x40000>; @@ -903,7 +962,6 @@ status = "disabled"; }; - pcie0: pcie@33800000 { compatible = "fsl,imx8mq-pcie"; reg = <0x33800000 0x400000>, diff --git a/dts/src/arm64/freescale/imx8qxp.dtsi b/dts/src/arm64/freescale/imx8qxp.dtsi index 0683ee2a48..05fa0b7f36 100644 --- a/dts/src/arm64/freescale/imx8qxp.dtsi +++ b/dts/src/arm64/freescale/imx8qxp.dtsi @@ -17,11 +17,19 @@ #size-cells = <2>; aliases { + gpio0 = &lsio_gpio0; + gpio1 = &lsio_gpio1; + gpio2 = &lsio_gpio2; + gpio3 = &lsio_gpio3; + gpio4 = &lsio_gpio4; + gpio5 = &lsio_gpio5; + gpio6 = &lsio_gpio6; + gpio7 = &lsio_gpio7; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; - serial0 = &adma_lpuart0; mu1 = &lsio_mu1; + serial0 = &adma_lpuart0; }; cpus { @@ -141,6 +149,12 @@ compatible = "fsl,imx8qxp-iomuxc"; }; + ocotp: imx8qx-ocotp { + compatible = "fsl,imx8qxp-scu-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + }; + pd: imx8qx-pd { compatible = "fsl,imx8qxp-scu-pd"; #power-domain-cells = <1>; @@ -149,6 +163,11 @@ rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; }; + + watchdog { + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; }; timer { @@ -378,56 +397,25 @@ }; }; - lsio_subsys: bus@5d000000 { + ddr_subsyss: bus@5c000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; - - lsio_lpcg: clock-controller@5d400000 { - compatible = "fsl,imx8qxp-lpcg-lsio"; - reg = <0x5d400000 0x400000>; - #clock-cells = <1>; - }; + ranges = <0x5c000000 0x0 0x5c000000 0x1000000>; - lsio_mu0: mailbox@5d1b0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1b0000 0x10000>; - interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu1: mailbox@5d1c0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1c0000 0x10000>; - interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - }; - - lsio_mu2: mailbox@5d1d0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1d0000 0x10000>; - interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; - - lsio_mu3: mailbox@5d1e0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1e0000 0x10000>; - interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; + ddr-pmu@5c020000 { + compatible = "fsl,imx8-ddr-pmu"; + reg = <0x5c020000 0x10000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; }; + }; - lsio_mu4: mailbox@5d1f0000 { - compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; - reg = <0x5d1f0000 0x10000>; - interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - #mbox-cells = <2>; - status = "disabled"; - }; + lsio_subsys: bus@5d000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x5d000000 0x0 0x5d000000 0x1000000>; lsio_gpio0: gpio@5d080000 { compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio"; @@ -516,10 +504,58 @@ #interrupt-cells = <2>; power-domains = <&pd IMX_SC_R_GPIO_7>; }; - }; - watchdog { - compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; - timeout-sec = <60>; + lsio_mu0: mailbox@5d1b0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1b0000 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu1: mailbox@5d1c0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1c0000 0x10000>; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + }; + + lsio_mu2: mailbox@5d1d0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1d0000 0x10000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu3: mailbox@5d1e0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1e0000 0x10000>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu4: mailbox@5d1f0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1f0000 0x10000>; + interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + status = "disabled"; + }; + + lsio_mu13: mailbox@5d280000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d280000 0x10000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_MU_13A>; + }; + + lsio_lpcg: clock-controller@5d400000 { + compatible = "fsl,imx8qxp-lpcg-lsio"; + reg = <0x5d400000 0x400000>; + #clock-cells = <1>; + }; }; }; diff --git a/dts/src/arm64/hisilicon/hi3660-coresight.dtsi b/dts/src/arm64/hisilicon/hi3660-coresight.dtsi new file mode 100644 index 0000000000..d607f2f669 --- /dev/null +++ b/dts/src/arm64/hisilicon/hi3660-coresight.dtsi @@ -0,0 +1,456 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * dtsi for Hisilicon Hi3660 Coresight + * + * Copyright (C) 2016-2018 Hisilicon Ltd. + * + * Author: Wanglai Shi <shiwanglai@hisilicon.com> + * + */ +/ { + soc { + /* A53 cluster internals */ + etm@ecc40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xecc40000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu0>; + + out-ports { + port { + etm0_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in0>; + }; + }; + }; + }; + + etm@ecd40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xecd40000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu1>; + + out-ports { + port { + etm1_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in1>; + }; + }; + }; + }; + + etm@ece40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xece40000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu2>; + + out-ports { + port { + etm2_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in2>; + }; + }; + }; + }; + + etm@ecf40000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xecf40000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu3>; + + out-ports { + port { + etm3_out: endpoint { + remote-endpoint = + <&cluster0_funnel_in3>; + }; + }; + }; + }; + + funnel@ec801000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0xec801000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + out-ports { + port { + cluster0_funnel_out: endpoint { + remote-endpoint = + <&cluster0_etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + cluster0_funnel_in0: endpoint { + remote-endpoint = <&etm0_out>; + }; + }; + + port@1 { + reg = <1>; + cluster0_funnel_in1: endpoint { + remote-endpoint = <&etm1_out>; + }; + }; + + port@2 { + reg = <2>; + cluster0_funnel_in2: endpoint { + remote-endpoint = <&etm2_out>; + }; + }; + + port@3 { + reg = <3>; + cluster0_funnel_in3: endpoint { + remote-endpoint = <&etm3_out>; + }; + }; + }; + }; + + etf@ec802000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xec802000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + cluster0_etf_in: endpoint { + remote-endpoint = + <&cluster0_funnel_out>; + }; + }; + }; + + out-ports { + port { + cluster0_etf_out: endpoint { + remote-endpoint = + <&combo_funnel_in0>; + }; + }; + }; + }; + + /* A73 cluster internals */ + etm@ed440000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xed440000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu4>; + + out-ports { + port { + etm4_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in0>; + }; + }; + }; + }; + + etm@ed540000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xed540000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu5>; + + out-ports { + port { + etm5_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in1>; + }; + }; + }; + }; + + etm@ed640000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xed640000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu6>; + + out-ports { + port { + etm6_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in2>; + }; + }; + }; + }; + + etm@ed740000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0xed740000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + cpu = <&cpu7>; + + out-ports { + port { + etm7_out: endpoint { + remote-endpoint = + <&cluster1_funnel_in3>; + }; + }; + }; + }; + + funnel@ed001000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0xed001000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + out-ports { + port { + cluster1_funnel_out: endpoint { + remote-endpoint = + <&cluster1_etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + cluster1_funnel_in0: endpoint { + remote-endpoint = <&etm4_out>; + }; + }; + + port@1 { + reg = <1>; + cluster1_funnel_in1: endpoint { + remote-endpoint = <&etm5_out>; + }; + }; + + port@2 { + reg = <2>; + cluster1_funnel_in2: endpoint { + remote-endpoint = <&etm6_out>; + }; + }; + + port@3 { + reg = <3>; + cluster1_funnel_in3: endpoint { + remote-endpoint = <&etm7_out>; + }; + }; + }; + }; + + etf@ed002000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xed002000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + cluster1_etf_in: endpoint { + remote-endpoint = + <&cluster1_funnel_out>; + }; + }; + }; + + out-ports { + port { + cluster1_etf_out: endpoint { + remote-endpoint = + <&combo_funnel_in1>; + }; + }; + }; + }; + + /* An invisible combo funnel between clusters and top funnel */ + funnel { + compatible = "arm,coresight-static-funnel"; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + out-ports { + port { + combo_funnel_out: endpoint { + remote-endpoint = + <&top_funnel_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + combo_funnel_in0: endpoint { + remote-endpoint = + <&cluster0_etf_out>; + }; + }; + + port@1 { + reg = <1>; + combo_funnel_in1: endpoint { + remote-endpoint = + <&cluster1_etf_out>; + }; + }; + }; + }; + + /* Top internals */ + funnel@ec031000 { + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; + reg = <0 0xec031000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + out-ports { + port { + top_funnel_out: endpoint { + remote-endpoint = + <&top_etf_in>; + }; + }; + }; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + top_funnel_in: endpoint { + remote-endpoint = + <&combo_funnel_out>; + }; + }; + }; + }; + + etf@ec036000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xec036000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + top_etf_in: endpoint { + remote-endpoint = + <&top_funnel_out>; + }; + }; + }; + + out-ports { + port { + top_etf_out: endpoint { + remote-endpoint = + <&replicator_in>; + }; + }; + }; + }; + + replicator { + compatible = "arm,coresight-static-replicator"; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + replicator_in: endpoint { + remote-endpoint = + <&top_etf_out>; + }; + }; + }; + + out-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + replicator0_out0: endpoint { + remote-endpoint = <&etr_in>; + }; + }; + + port@1 { + reg = <1>; + replicator0_out1: endpoint { + remote-endpoint = <&tpiu_in>; + }; + }; + }; + }; + + etr@ec033000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0xec033000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + etr_in: endpoint { + remote-endpoint = + <&replicator0_out0>; + }; + }; + }; + }; + + tpiu@ec032000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0 0xec032000 0 0x1000>; + clocks = <&crg_ctrl HI3660_PCLK>; + clock-names = "apb_pclk"; + + in-ports { + port { + tpiu_in: endpoint { + remote-endpoint = + <&replicator0_out1>; + }; + }; + }; + }; + }; +}; diff --git a/dts/src/arm64/hisilicon/hi3660.dtsi b/dts/src/arm64/hisilicon/hi3660.dtsi index aa6a8ad31b..253cc345f1 100644 --- a/dts/src/arm64/hisilicon/hi3660.dtsi +++ b/dts/src/arm64/hisilicon/hi3660.dtsi @@ -1154,3 +1154,5 @@ }; }; }; + +#include "hi3660-coresight.dtsi" diff --git a/dts/src/arm64/hisilicon/hi6220-coresight.dtsi b/dts/src/arm64/hisilicon/hi6220-coresight.dtsi index 30f54b77c2..651771a73e 100644 --- a/dts/src/arm64/hisilicon/hi6220-coresight.dtsi +++ b/dts/src/arm64/hisilicon/hi6220-coresight.dtsi @@ -11,7 +11,7 @@ / { soc { funnel@f6401000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xf6401000 0 0x1000>; clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; @@ -61,7 +61,7 @@ }; replicator { - compatible = "arm,coresight-replicator"; + compatible = "arm,coresight-static-replicator"; clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; @@ -129,7 +129,7 @@ }; funnel@f6501000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0xf6501000 0 0x1000>; clocks = <&acpu_sctrl HI6220_ACPU_SFT_AT_S>; clock-names = "apb_pclk"; diff --git a/dts/src/arm64/marvell/armada-3720-espressobin.dts b/dts/src/arm64/marvell/armada-3720-espressobin.dts index 6be019e188..fbcf03f86c 100644 --- a/dts/src/arm64/marvell/armada-3720-espressobin.dts +++ b/dts/src/arm64/marvell/armada-3720-espressobin.dts @@ -95,25 +95,9 @@ flash@0 { reg = <0>; - compatible = "winbond,w25q32dw", "jedec,spi-flash"; + compatible = "jedec,spi-nor"; spi-max-frequency = <104000000>; m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0 0x180000>; - }; - - partition@180000 { - label = "ubootenv"; - reg = <0x180000 0x10000>; - }; - }; }; }; diff --git a/dts/src/arm64/marvell/armada-7040-db.dts b/dts/src/arm64/marvell/armada-7040-db.dts index d20d84ce7c..f34ee87a0f 100644 --- a/dts/src/arm64/marvell/armada-7040-db.dts +++ b/dts/src/arm64/marvell/armada-7040-db.dts @@ -28,6 +28,32 @@ ethernet2 = &cp0_eth2; }; + cp0_exp_usb3_0_current_regulator: gpio-regulator { + compatible = "regulator-gpio"; + regulator-name = "cp0-usb3-0-current-regulator"; + regulator-type = "current"; + regulator-min-microamp = <500000>; + regulator-max-microamp = <900000>; + gpios = <&expander0 4 GPIO_ACTIVE_HIGH>; + states = <500000 0x0 + 900000 0x1>; + enable-active-high; + gpios-states = <0>; + }; + + cp0_exp_usb3_1_current_regulator: gpio-regulator { + compatible = "regulator-gpio"; + regulator-name = "cp0-usb3-1-current-regulator"; + regulator-type = "current"; + regulator-min-microamp = <500000>; + regulator-max-microamp = <900000>; + gpios = <&expander0 5 GPIO_ACTIVE_HIGH>; + states = <500000 0x0 + 900000 0x1>; + enable-active-high; + gpios-states = <0>; + }; + cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus { compatible = "regulator-fixed"; regulator-name = "usb3h0-vbus"; @@ -35,6 +61,7 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + vin-supply = <&cp0_exp_usb3_0_current_regulator>; }; cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus { @@ -44,6 +71,7 @@ regulator-max-microvolt = <5000000>; enable-active-high; gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; + vin-supply = <&cp0_exp_usb3_1_current_regulator>; }; cp0_usb3_0_phy: cp0-usb3-0-phy { diff --git a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts index 9143aa13ce..f275d9420d 100644 --- a/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts +++ b/dts/src/arm64/marvell/armada-8040-clearfog-gt-8k.dts @@ -63,6 +63,7 @@ tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>; + maximum-power-milliwatt = <2000>; }; leds { diff --git a/dts/src/arm64/marvell/armada-8040-db.dts b/dts/src/arm64/marvell/armada-8040-db.dts index 9f4f939ab6..d6e9c014c2 100644 --- a/dts/src/arm64/marvell/armada-8040-db.dts +++ b/dts/src/arm64/marvell/armada-8040-db.dts @@ -27,6 +27,8 @@ ethernet1 = &cp0_eth2; ethernet2 = &cp1_eth0; ethernet3 = &cp1_eth1; + i2c1 = &cp0_i2c0; + i2c2 = &cp1_i2c0; }; cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus { @@ -72,11 +74,6 @@ }; }; -&i2c0 { - status = "okay"; - clock-frequency = <100000>; -}; - &spi0 { status = "okay"; diff --git a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi index 329f8ceeeb..205071b45a 100644 --- a/dts/src/arm64/marvell/armada-8040-mcbin.dtsi +++ b/dts/src/arm64/marvell/armada-8040-mcbin.dtsi @@ -184,6 +184,8 @@ num-lanes = <4>; num-viewport = <8>; reset-gpios = <&cp0_gpio2 20 GPIO_ACTIVE_LOW>; + ranges = <0x81000000 0x0 0xf9010000 0x0 0xf9010000 0x0 0x10000 + 0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x20000000>; status = "okay"; }; diff --git a/dts/src/arm64/marvell/armada-ap806-dual.dtsi b/dts/src/arm64/marvell/armada-ap806-dual.dtsi index 861fd21922..9024a2d9db 100644 --- a/dts/src/arm64/marvell/armada-ap806-dual.dtsi +++ b/dts/src/arm64/marvell/armada-ap806-dual.dtsi @@ -20,12 +20,14 @@ compatible = "arm,cortex-a72"; reg = <0x000>; enable-method = "psci"; + #cooling-cells = <2>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x001>; enable-method = "psci"; + #cooling-cells = <2>; }; }; }; diff --git a/dts/src/arm64/marvell/armada-ap806-quad.dtsi b/dts/src/arm64/marvell/armada-ap806-quad.dtsi index 2baafe12eb..ea13ae78f5 100644 --- a/dts/src/arm64/marvell/armada-ap806-quad.dtsi +++ b/dts/src/arm64/marvell/armada-ap806-quad.dtsi @@ -20,24 +20,29 @@ compatible = "arm,cortex-a72"; reg = <0x000>; enable-method = "psci"; + #cooling-cells = <2>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x001>; enable-method = "psci"; + #cooling-cells = <2>; }; cpu2: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x100>; enable-method = "psci"; + #cooling-cells = <2>; }; cpu3: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a72"; reg = <0x101>; enable-method = "psci"; + #cooling-cells = <2>; }; }; + }; diff --git a/dts/src/arm64/marvell/armada-ap806.dtsi b/dts/src/arm64/marvell/armada-ap806.dtsi index 91dad7e4ee..96228f93b2 100644 --- a/dts/src/arm64/marvell/armada-ap806.dtsi +++ b/dts/src/arm64/marvell/armada-ap806.dtsi @@ -297,8 +297,6 @@ * * Only one thermal zone per AP/CP may trigger interrupts at a time, the * first one that will have a critical trip point will be chosen. - * - * The cooling maps are always empty as there are no cooling devices. */ thermal-zones { ap_thermal_ic: ap-thermal-ic { @@ -318,44 +316,136 @@ cooling-maps { }; }; - ap_thermal_cpu1: ap-thermal-cpu1 { + ap_thermal_cpu0: ap-thermal-cpu0 { polling-delay-passive = <1000>; polling-delay = <1000>; thermal-sensors = <&ap_thermal 1>; - trips { }; - cooling-maps { }; + trips { + cpu0_hot: cpu0-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_emerg: cpu0-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map0_hot: map0-hot { + trip = <&cpu0_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map0_emerg: map0-ermerg { + trip = <&cpu0_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; }; - ap_thermal_cpu2: ap-thermal-cpu2 { + ap_thermal_cpu1: ap-thermal-cpu1 { polling-delay-passive = <1000>; polling-delay = <1000>; thermal-sensors = <&ap_thermal 2>; - trips { }; - cooling-maps { }; + trips { + cpu1_hot: cpu1-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_emerg: cpu1-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map1_hot: map1-hot { + trip = <&cpu1_hot>; + cooling-device = <&cpu0 1 2>, + <&cpu1 1 2>; + }; + map1_emerg: map1-emerg { + trip = <&cpu1_emerg>; + cooling-device = <&cpu0 3 3>, + <&cpu1 3 3>; + }; + }; }; - ap_thermal_cpu3: ap-thermal-cpu3 { + ap_thermal_cpu2: ap-thermal-cpu2 { polling-delay-passive = <1000>; polling-delay = <1000>; thermal-sensors = <&ap_thermal 3>; - trips { }; - cooling-maps { }; + trips { + cpu2_hot: cpu2-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_emerg: cpu2-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map2_hot: map2-hot { + trip = <&cpu2_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map2_emerg: map2-emerg { + trip = <&cpu2_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; }; - ap_thermal_cpu4: ap-thermal-cpu4 { + ap_thermal_cpu3: ap-thermal-cpu3 { polling-delay-passive = <1000>; polling-delay = <1000>; thermal-sensors = <&ap_thermal 4>; - trips { }; - cooling-maps { }; + trips { + cpu3_hot: cpu3-hot { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_emerg: cpu3-emerg { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map3_hot: map3-bhot { + trip = <&cpu3_hot>; + cooling-device = <&cpu2 1 2>, + <&cpu3 1 2>; + }; + map3_emerg: map3-emerg { + trip = <&cpu3_emerg>; + cooling-device = <&cpu2 3 3>, + <&cpu3 3 3>; + }; + }; }; }; }; diff --git a/dts/src/arm64/marvell/armada-cp110.dtsi b/dts/src/arm64/marvell/armada-cp110.dtsi index 4d6e4a097f..f71afb1de1 100644 --- a/dts/src/arm64/marvell/armada-cp110.dtsi +++ b/dts/src/arm64/marvell/armada-cp110.dtsi @@ -238,6 +238,7 @@ <85 IRQ_TYPE_LEVEL_HIGH>, <84 IRQ_TYPE_LEVEL_HIGH>, <83 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; status = "disabled"; }; @@ -253,6 +254,7 @@ <81 IRQ_TYPE_LEVEL_HIGH>, <80 IRQ_TYPE_LEVEL_HIGH>, <79 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; status = "disabled"; }; }; diff --git a/dts/src/arm64/mediatek/mt7622.dtsi b/dts/src/arm64/mediatek/mt7622.dtsi index 4b1f5ae710..d1e13d340e 100644 --- a/dts/src/arm64/mediatek/mt7622.dtsi +++ b/dts/src/arm64/mediatek/mt7622.dtsi @@ -929,7 +929,8 @@ sgmiisys: sgmiisys@1b128000 { compatible = "mediatek,mt7622-sgmiisys", "syscon"; - reg = <0 0x1b128000 0 0x1000>; + reg = <0 0x1b128000 0 0x3000>; #clock-cells = <1>; + mediatek,physpeed = "2500"; }; }; diff --git a/dts/src/arm64/mediatek/mt8183-evb.dts b/dts/src/arm64/mediatek/mt8183-evb.dts new file mode 100644 index 0000000000..d8e555cbb5 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183-evb.dts @@ -0,0 +1,140 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Ben Ho <ben.ho@mediatek.com> + * Erin Lo <erin.lo@mediatek.com> + */ + +/dts-v1/; +#include "mt8183.dtsi" + +/ { + model = "MediaTek MT8183 evaluation board"; + compatible = "mediatek,mt8183-evb", "mediatek,mt8183"; + + aliases { + serial0 = &uart0; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; +}; + +&auxadc { + status = "okay"; +}; + +&pio { + spi_pins_0: spi0{ + pins_spi{ + pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>, + <PINMUX_GPIO86__FUNC_SPI0_CSB>, + <PINMUX_GPIO87__FUNC_SPI0_MO>, + <PINMUX_GPIO88__FUNC_SPI0_CLK>; + bias-disable; + }; + }; + + spi_pins_1: spi1{ + pins_spi{ + pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>, + <PINMUX_GPIO162__FUNC_SPI1_A_CSB>, + <PINMUX_GPIO163__FUNC_SPI1_A_MO>, + <PINMUX_GPIO164__FUNC_SPI1_A_CLK>; + bias-disable; + }; + }; + + spi_pins_2: spi2{ + pins_spi{ + pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>, + <PINMUX_GPIO1__FUNC_SPI2_MO>, + <PINMUX_GPIO2__FUNC_SPI2_CLK>, + <PINMUX_GPIO94__FUNC_SPI2_MI>; + bias-disable; + }; + }; + + spi_pins_3: spi3{ + pins_spi{ + pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>, + <PINMUX_GPIO22__FUNC_SPI3_CSB>, + <PINMUX_GPIO23__FUNC_SPI3_MO>, + <PINMUX_GPIO24__FUNC_SPI3_CLK>; + bias-disable; + }; + }; + + spi_pins_4: spi4{ + pins_spi{ + pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>, + <PINMUX_GPIO18__FUNC_SPI4_CSB>, + <PINMUX_GPIO19__FUNC_SPI4_MO>, + <PINMUX_GPIO20__FUNC_SPI4_CLK>; + bias-disable; + }; + }; + + spi_pins_5: spi5{ + pins_spi{ + pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>, + <PINMUX_GPIO14__FUNC_SPI5_CSB>, + <PINMUX_GPIO15__FUNC_SPI5_MO>, + <PINMUX_GPIO16__FUNC_SPI5_CLK>; + bias-disable; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_0>; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_1>; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_2>; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&spi3 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_3>; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&spi4 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_4>; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&spi5 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_5>; + mediatek,pad-select = <0>; + status = "okay"; + +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm64/mediatek/mt8183.dtsi b/dts/src/arm64/mediatek/mt8183.dtsi new file mode 100644 index 0000000000..c2749c4631 --- /dev/null +++ b/dts/src/arm64/mediatek/mt8183.dtsi @@ -0,0 +1,447 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (c) 2018 MediaTek Inc. + * Author: Ben Ho <ben.ho@mediatek.com> + * Erin Lo <erin.lo@mediatek.com> + */ + +#include <dt-bindings/clock/mt8183-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "mt8183-pinfunc.h" + +/ { + compatible = "mediatek,mt8183"; + interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x000>; + enable-method = "psci"; + capacity-dmips-mhz = <741>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x001>; + enable-method = "psci"; + capacity-dmips-mhz = <741>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x002>; + enable-method = "psci"; + capacity-dmips-mhz = <741>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x003>; + enable-method = "psci"; + capacity-dmips-mhz = <741>; + }; + + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x101>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x102>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a73"; + reg = <0x103>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + }; + }; + + pmu-a53 { + compatible = "arm,cortex-a53-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>; + }; + + pmu-a73 { + compatible = "arm,cortex-a73-pmu"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + clk26m: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + soc_data: soc_data@8000000 { + compatible = "mediatek,mt8183-efuse", + "mediatek,efuse"; + reg = <0 0x08000000 0 0x0010>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + gic: interrupt-controller@c000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <4>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x0c000000 0 0x40000>, /* GICD */ + <0 0x0c100000 0 0x200000>, /* GICR */ + <0 0x0c400000 0 0x2000>, /* GICC */ + <0 0x0c410000 0 0x1000>, /* GICH */ + <0 0x0c420000 0 0x2000>; /* GICV */ + + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; + ppi_cluster1: interrupt-partition-1 { + affinity = <&cpu4 &cpu5 &cpu6 &cpu7>; + }; + }; + }; + + mcucfg: syscon@c530000 { + compatible = "mediatek,mt8183-mcucfg", "syscon"; + reg = <0 0x0c530000 0 0x1000>; + #clock-cells = <1>; + }; + + sysirq: interrupt-controller@c530a80 { + compatible = "mediatek,mt8183-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x0c530a80 0 0x50>; + }; + + topckgen: syscon@10000000 { + compatible = "mediatek,mt8183-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: syscon@10001000 { + compatible = "mediatek,mt8183-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + }; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt8183-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x11f20000 0 0x1000>, + <0 0x11e80000 0 0x1000>, + <0 0x11e70000 0 0x1000>, + <0 0x11e90000 0 0x1000>, + <0 0x11d30000 0 0x1000>, + <0 0x11d20000 0 0x1000>, + <0 0x11c50000 0 0x1000>, + <0 0x11f30000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "iocfg0", "iocfg1", "iocfg2", + "iocfg3", "iocfg4", "iocfg5", + "iocfg6", "iocfg7", "iocfg8", + "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 192>; + interrupt-controller; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + }; + + apmixedsys: syscon@1000c000 { + compatible = "mediatek,mt8183-apmixedsys", "syscon"; + reg = <0 0x1000c000 0 0x1000>; + #clock-cells = <1>; + }; + + pwrap: pwrap@1000d000 { + compatible = "mediatek,mt8183-pwrap"; + reg = <0 0x1000d000 0 0x1000>; + reg-names = "pwrap"; + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topckgen CLK_TOP_MUX_PMICSPI>, + <&infracfg CLK_INFRA_PMIC_AP>; + clock-names = "spi", "wrap"; + }; + + auxadc: auxadc@11001000 { + compatible = "mediatek,mt8183-auxadc", + "mediatek,mt8173-auxadc"; + reg = <0 0x11001000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt8183-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg CLK_INFRA_UART0>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt8183-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg CLK_INFRA_UART1>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt8183-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x1000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk26m>, <&infracfg CLK_INFRA_UART2>; + clock-names = "baud", "bus"; + status = "disabled"; + }; + + spi0: spi@1100a000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x1000>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi1: spi@11010000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11010000 0 0x1000>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI1>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi2: spi@11012000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11012000 0 0x1000>; + interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI2>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi3: spi@11013000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11013000 0 0x1000>; + interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI3>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi4: spi@11018000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11018000 0 0x1000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI4>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + spi5: spi@11019000 { + compatible = "mediatek,mt8183-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x11019000 0 0x1000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_SYSPLL_D5_D2>, + <&topckgen CLK_TOP_MUX_SPI>, + <&infracfg CLK_INFRA_SPI5>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + + audiosys: syscon@11220000 { + compatible = "mediatek,mt8183-audiosys", "syscon"; + reg = <0 0x11220000 0 0x1000>; + #clock-cells = <1>; + }; + + efuse: efuse@11f10000 { + compatible = "mediatek,mt8183-efuse", + "mediatek,efuse"; + reg = <0 0x11f10000 0 0x1000>; + }; + + mfgcfg: syscon@13000000 { + compatible = "mediatek,mt8183-mfgcfg", "syscon"; + reg = <0 0x13000000 0 0x1000>; + #clock-cells = <1>; + }; + + mmsys: syscon@14000000 { + compatible = "mediatek,mt8183-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys: syscon@15020000 { + compatible = "mediatek,mt8183-imgsys", "syscon"; + reg = <0 0x15020000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: syscon@16000000 { + compatible = "mediatek,mt8183-vdecsys", "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: syscon@17000000 { + compatible = "mediatek,mt8183-vencsys", "syscon"; + reg = <0 0x17000000 0 0x1000>; + #clock-cells = <1>; + }; + + ipu_conn: syscon@19000000 { + compatible = "mediatek,mt8183-ipu_conn", "syscon"; + reg = <0 0x19000000 0 0x1000>; + #clock-cells = <1>; + }; + + ipu_adl: syscon@19010000 { + compatible = "mediatek,mt8183-ipu_adl", "syscon"; + reg = <0 0x19010000 0 0x1000>; + #clock-cells = <1>; + }; + + ipu_core0: syscon@19180000 { + compatible = "mediatek,mt8183-ipu_core0", "syscon"; + reg = <0 0x19180000 0 0x1000>; + #clock-cells = <1>; + }; + + ipu_core1: syscon@19280000 { + compatible = "mediatek,mt8183-ipu_core1", "syscon"; + reg = <0 0x19280000 0 0x1000>; + #clock-cells = <1>; + }; + + camsys: syscon@1a000000 { + compatible = "mediatek,mt8183-camsys", "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; + }; + }; +}; diff --git a/dts/src/arm64/nvidia/tegra186-p2771-0000.dts b/dts/src/arm64/nvidia/tegra186-p2771-0000.dts index 14d7fea82d..bdace01561 100644 --- a/dts/src/arm64/nvidia/tegra186-p2771-0000.dts +++ b/dts/src/arm64/nvidia/tegra186-p2771-0000.dts @@ -7,18 +7,70 @@ #include "tegra186-p3310.dtsi" / { - model = "NVIDIA Tegra186 P2771-0000 Development Board"; + model = "NVIDIA Jetson TX2 Developer Kit"; compatible = "nvidia,p2771-0000", "nvidia,tegra186"; + aconnect { + status = "okay"; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + }; + i2c@3160000 { power-monitor@42 { compatible = "ti,ina3221"; reg = <0x42>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "VDD_MUX"; + shunt-resistor-micro-ohms = <20000>; + }; + + channel@1 { + reg = <0x1>; + label = "VDD_5V0_IO_SYS"; + shunt-resistor-micro-ohms = <5000>; + }; + + channel@2 { + reg = <0x2>; + label = "VDD_3V3_SYS"; + shunt-resistor-micro-ohms = <10000>; + }; }; power-monitor@43 { compatible = "ti,ina3221"; reg = <0x43>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "VDD_3V3_IO_SLP"; + shunt-resistor-micro-ohms = <10000>; + }; + + channel@1 { + reg = <0x1>; + label = "VDD_1V8_IO"; + shunt-resistor-micro-ohms = <10000>; + }; + + channel@2 { + reg = <0x2>; + label = "VDD_M2_IN"; + shunt-resistor-micro-ohms = <10000>; + }; }; exp1: gpio@74 { @@ -31,6 +83,8 @@ #gpio-cells = <2>; gpio-controller; + + vcc-supply = <&vdd_3v3_sys>; }; exp2: gpio@77 { @@ -43,6 +97,8 @@ #gpio-cells = <2>; gpio-controller; + + vcc-supply = <&vdd_1v8>; }; }; @@ -145,6 +201,19 @@ phy-names = "usb2-0", "usb2-1", "usb3-0"; }; + i2c@c250000 { + /* carrier board ID EEPROM */ + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; + }; + pcie@10003000 { status = "okay"; @@ -278,7 +347,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA186_MAIN_GPIO(L, 4) GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_5v0_sys>; @@ -292,7 +361,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio TEGRA_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>; + gpio = <&gpio TEGRA186_MAIN_GPIO(L, 5) GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_5v0_sys>; diff --git a/dts/src/arm64/nvidia/tegra186-p3310.dtsi b/dts/src/arm64/nvidia/tegra186-p3310.dtsi index 64686b033c..5e18acf5cf 100644 --- a/dts/src/arm64/nvidia/tegra186-p3310.dtsi +++ b/dts/src/arm64/nvidia/tegra186-p3310.dtsi @@ -4,7 +4,7 @@ #include <dt-bindings/mfd/max77620.h> / { - model = "NVIDIA Tegra186 P3310 Processor Module"; + model = "NVIDIA Jetson TX2"; compatible = "nvidia,p3310", "nvidia,tegra186"; aliases { @@ -67,11 +67,51 @@ power-monitor@40 { compatible = "ti,ina3221"; reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "VDD_SYS_GPU"; + shunt-resistor-micro-ohms = <10000>; + }; + + channel@1 { + reg = <0x1>; + label = "VDD_SYS_SOC"; + shunt-resistor-micro-ohms = <10000>; + }; + + channel@2 { + reg = <0x2>; + label = "VDD_3V8_WIFI"; + shunt-resistor-micro-ohms = <10000>; + }; }; power-monitor@41 { compatible = "ti,ina3221"; reg = <0x41>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + label = "VDD_IN"; + shunt-resistor-micro-ohms = <5000>; + }; + + channel@1 { + reg = <0x1>; + label = "VDD_SYS_CPU"; + shunt-resistor-micro-ohms = <10000>; + }; + + channel@2 { + reg = <0x2>; + label = "VDD_5V0_DDR"; + shunt-resistor-micro-ohms = <10000>; + }; }; }; @@ -124,6 +164,17 @@ i2c@c250000 { status = "okay"; + + /* module ID EEPROM */ + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; }; rtc@c2a0000 { diff --git a/dts/src/arm64/nvidia/tegra186.dtsi b/dts/src/arm64/nvidia/tegra186.dtsi index 426ac0bdf6..47cd831fcf 100644 --- a/dts/src/arm64/nvidia/tegra186.dtsi +++ b/dts/src/arm64/nvidia/tegra186.dtsi @@ -70,6 +70,75 @@ snps,rxpbl = <8>; }; + aconnect { + compatible = "nvidia,tegra186-aconnect", + "nvidia,tegra210-aconnect"; + clocks = <&bpmp TEGRA186_CLK_APE>, + <&bpmp TEGRA186_CLK_APB2APE>; + clock-names = "ape", "apb2ape"; + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_AUD>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x02900000 0x0 0x02900000 0x200000>; + status = "disabled"; + + dma-controller@2930000 { + compatible = "nvidia,tegra186-adma"; + reg = <0x02930000 0x20000>; + interrupt-parent = <&agic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&bpmp TEGRA186_CLK_AHUB>; + clock-names = "d_audio"; + status = "disabled"; + }; + + agic: interrupt-controller@2a40000 { + compatible = "nvidia,tegra186-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x02a41000 0x1000>, + <0x02a42000 0x2000>; + interrupts = <GIC_SPI 145 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&bpmp TEGRA186_CLK_APE>; + clock-names = "clk"; + status = "disabled"; + }; + }; + memory-controller@2c00000 { compatible = "nvidia,tegra186-mc"; reg = <0x0 0x02c00000 0x0 0xb0000>; @@ -173,6 +242,9 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C4>; reset-names = "i2c"; + pinctrl-names = "default", "idle"; + pinctrl-0 = <&state_dpaux1_i2c>; + pinctrl-1 = <&state_dpaux1_off>; status = "disabled"; }; @@ -201,6 +273,9 @@ clock-names = "div-clk"; resets = <&bpmp TEGRA186_RESET_I2C6>; reset-names = "i2c"; + pinctrl-names = "default", "idle"; + pinctrl-0 = <&state_dpaux_i2c>; + pinctrl-1 = <&state_dpaux_off>; status = "disabled"; }; @@ -1121,6 +1196,30 @@ }; }; + bpmp: bpmp { + compatible = "nvidia,tegra186-bpmp"; + iommus = <&smmu TEGRA186_SID_BPMP>; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB + TEGRA_HSP_DB_MASTER_BPMP>; + shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + + bpmp_i2c: i2c { + compatible = "nvidia,tegra186-bpmp-i2c"; + nvidia,bpmp-bus-id = <5>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + bpmp_thermal: thermal { + compatible = "nvidia,tegra186-bpmp-thermal"; + #thermal-sensor-cells = <1>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -1128,61 +1227,97 @@ cpu@0 { compatible = "nvidia,tegra186-denver"; device_type = "cpu"; + i-cache-size = <0x20000>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_DENVER>; reg = <0x000>; }; cpu@1 { compatible = "nvidia,tegra186-denver"; device_type = "cpu"; + i-cache-size = <0x20000>; + i-cache-line-size = <64>; + i-cache-sets = <512>; + d-cache-size = <0x10000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_DENVER>; reg = <0x001>; }; cpu@2 { compatible = "arm,cortex-a57"; device_type = "cpu"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_A57>; reg = <0x100>; }; cpu@3 { compatible = "arm,cortex-a57"; device_type = "cpu"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_A57>; reg = <0x101>; }; cpu@4 { compatible = "arm,cortex-a57"; device_type = "cpu"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_A57>; reg = <0x102>; }; cpu@5 { compatible = "arm,cortex-a57"; device_type = "cpu"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <256>; + next-level-cache = <&L2_A57>; reg = <0x103>; }; - }; - bpmp: bpmp { - compatible = "nvidia,tegra186-bpmp"; - iommus = <&smmu TEGRA186_SID_BPMP>; - mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB - TEGRA_HSP_DB_MASTER_BPMP>; - shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - - bpmp_i2c: i2c { - compatible = "nvidia,tegra186-bpmp-i2c"; - nvidia,bpmp-bus-id = <5>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + L2_DENVER: l2-cache0 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; }; - bpmp_thermal: thermal { - compatible = "nvidia,tegra186-bpmp-thermal"; - #thermal-sensor-cells = <1>; + L2_A57: l2-cache1 { + compatible = "cache"; + cache-unified; + cache-level = <2>; + cache-size = <0x200000>; + cache-line-size = <64>; + cache-sets = <2048>; }; }; @@ -1294,5 +1429,6 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; interrupt-parent = <&gic>; + always-on; }; }; diff --git a/dts/src/arm64/nvidia/tegra194-p2888.dtsi b/dts/src/arm64/nvidia/tegra194-p2888.dtsi index 0fd5bd29fb..62e07e1197 100644 --- a/dts/src/arm64/nvidia/tegra194-p2888.dtsi +++ b/dts/src/arm64/nvidia/tegra194-p2888.dtsi @@ -4,7 +4,7 @@ #include <dt-bindings/mfd/max77620.h> / { - model = "NVIDIA Tegra194 P2888 Processor Module"; + model = "NVIDIA Jetson AGX Xavier"; compatible = "nvidia,p2888", "nvidia,tegra194"; aliases { @@ -191,7 +191,7 @@ regulator-boot-on; }; - sd3 { + vdd_1v8ao: sd3 { regulator-name = "VDD_1V8AO"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; diff --git a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts index 73801b48d1..23597d53c9 100644 --- a/dts/src/arm64/nvidia/tegra194-p2972-0000.dts +++ b/dts/src/arm64/nvidia/tegra194-p2972-0000.dts @@ -7,10 +7,22 @@ #include "tegra194-p2888.dtsi" / { - model = "NVIDIA Jetson AGX Xavier Development Kit"; + model = "NVIDIA Jetson AGX Xavier Developer Kit"; compatible = "nvidia,p2972-0000", "nvidia,tegra194"; cbb { + aconnect { + status = "okay"; + + dma-controller@2930000 { + status = "okay"; + }; + + interrupt-controller@2a40000 { + status = "okay"; + }; + }; + ddc: i2c@31c0000 { status = "okay"; }; @@ -52,6 +64,47 @@ }; }; + pcie@14100000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_hsio_0>; + phy-names = "p2u-0"; + }; + + pcie@14140000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_hsio_7>; + phy-names = "p2u-0"; + }; + + pcie@14180000 { + status = "okay"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_hsio_2>, <&p2u_hsio_3>, <&p2u_hsio_4>, + <&p2u_hsio_5>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3"; + }; + + pcie@141a0000 { + status = "disabled"; + + vddio-pex-ctl-supply = <&vdd_1v8ao>; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + }; + fan: fan { compatible = "pwm-fan"; pwms = <&pwm4 0 45334>; diff --git a/dts/src/arm64/nvidia/tegra194.dtsi b/dts/src/arm64/nvidia/tegra194.dtsi index c77ca211fa..adebbbf36b 100644 --- a/dts/src/arm64/nvidia/tegra194.dtsi +++ b/dts/src/arm64/nvidia/tegra194.dtsi @@ -59,6 +59,77 @@ snps,rxpbl = <8>; }; + aconnect { + compatible = "nvidia,tegra194-aconnect", + "nvidia,tegra210-aconnect"; + clocks = <&bpmp TEGRA194_CLK_APE>, + <&bpmp TEGRA194_CLK_APB2APE>; + clock-names = "ape", "apb2ape"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_AUD>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x02900000 0x02900000 0x200000>; + status = "disabled"; + + dma-controller@2930000 { + compatible = "nvidia,tegra194-adma", + "nvidia,tegra186-adma"; + reg = <0x02930000 0x20000>; + interrupt-parent = <&agic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&bpmp TEGRA194_CLK_AHUB>; + clock-names = "d_audio"; + status = "disabled"; + }; + + agic: interrupt-controller@2a40000 { + compatible = "nvidia,tegra194-agic", + "nvidia,tegra210-agic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x02a41000 0x1000>, + <0x02a42000 0x2000>; + interrupts = <GIC_SPI 145 + (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&bpmp TEGRA194_CLK_APE>; + clock-names = "clk"; + status = "disabled"; + }; + }; + uarta: serial@3100000 { compatible = "nvidia,tegra194-uart", "nvidia,tegra20-uart"; reg = <0x03100000 0x40>; @@ -423,6 +494,166 @@ #mbox-cells = <2>; }; + p2u_hsio_0: phy@3e10000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e10000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_1: phy@3e20000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e20000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_2: phy@3e30000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e30000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_3: phy@3e40000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e40000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_4: phy@3e50000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e50000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_5: phy@3e60000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e60000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_6: phy@3e70000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e70000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_7: phy@3e80000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e80000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_8: phy@3e90000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03e90000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_9: phy@3ea0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03ea0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_0: phy@3eb0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03eb0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_1: phy@3ec0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03ec0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_2: phy@3ed0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03ed0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_3: phy@3ee0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03ee0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_4: phy@3ef0000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03ef0000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_5: phy@3f00000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03f00000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_6: phy@3f10000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03f10000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_nvhs_7: phy@3f20000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03f20000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_10: phy@3f30000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03f30000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + + p2u_hsio_11: phy@3f40000 { + compatible = "nvidia,tegra194-p2u"; + reg = <0x03f40000 0x10000>; + reg-names = "ctl"; + + #phy-cells = <0>; + }; + hsp_aon: hsp@c150000 { compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp"; reg = <0x0c150000 0xa0000>; @@ -886,6 +1117,283 @@ }; }; + pcie@14100000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14100000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x30000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x30040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x30080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <1>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_1>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_1_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_1>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 1>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x30100000 0x0 0x30100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x12 0x00000000 0x12 0x00000000 0x0 0x30000000 /* prefetchable memory (768MB) */ + 0x82000000 0x0 0x40000000 0x12 0x30000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + }; + + pcie@14120000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14120000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x32000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x32040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x32080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <2>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_2>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_2_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_2>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 2>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x32100000 0x0 0x32100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x12 0x40000000 0x12 0x40000000 0x0 0x30000000 /* prefetchable memory (768MB) */ + 0x82000000 0x0 0x40000000 0x12 0x70000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + }; + + pcie@14140000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX1A>; + reg = <0x00 0x14140000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x34000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x34040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x34080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <1>; + num-viewport = <8>; + linux,pci-domain = <3>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_3>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_3_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_3>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 3>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x34100000 0x0 0x34100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x12 0x80000000 0x12 0x80000000 0x0 0x30000000 /* prefetchable memory (768MB) */ + 0x82000000 0x0 0x40000000 0x12 0xb0000000 0x0 0x10000000>; /* non-prefetchable memory (256MB) */ + }; + + pcie@14160000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX4A>; + reg = <0x00 0x14160000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x36000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x36040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x36080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + num-viewport = <8>; + linux,pci-domain = <4>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_4>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_4_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_4>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 4>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x36100000 0x0 0x36100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x14 0x00000000 0x14 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ + 0x82000000 0x0 0x40000000 0x17 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + }; + + pcie@14180000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8B>; + reg = <0x00 0x14180000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x38000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x38040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x38080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + num-viewport = <8>; + linux,pci-domain = <0>; + + clocks = <&bpmp TEGRA194_CLK_PEX0_CORE_0>; + clock-names = "core"; + + resets = <&bpmp TEGRA194_RESET_PEX0_CORE_0_APB>, + <&bpmp TEGRA194_RESET_PEX0_CORE_0>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 0>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x38100000 0x0 0x38100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x18 0x00000000 0x18 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ + 0x82000000 0x0 0x40000000 0x1b 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + }; + + pcie@141a0000 { + compatible = "nvidia,tegra194-pcie", "snps,dw-pcie"; + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */ + 0x00 0x3a000000 0x0 0x00040000 /* configuration space (256K) */ + 0x00 0x3a040000 0x0 0x00040000 /* iATU_DMA reg space (256K) */ + 0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + num-viewport = <8>; + linux,pci-domain = <5>; + + clocks = <&bpmp TEGRA194_CLK_PEX1_CORE_5>, + <&bpmp TEGRA194_CLK_PEX1_CORE_5M>; + clock-names = "core", "core_m"; + + resets = <&bpmp TEGRA194_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA194_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + nvidia,bpmp = <&bpmp 5>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + + supports-clkreq; + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x3a100000 0x0 0x3a100000 0x0 0x00100000 /* downstream I/O (1MB) */ + 0xc2000000 0x1c 0x00000000 0x1c 0x00000000 0x3 0x40000000 /* prefetchable memory (13GB) */ + 0x82000000 0x0 0x40000000 0x1f 0x40000000 0x0 0xc0000000>; /* non-prefetchable memory (3GB) */ + }; + sysram@40000000 { compatible = "nvidia,tegra194-sysram", "mmio-sram"; reg = <0x0 0x40000000 0x0 0x50000>; @@ -1053,5 +1561,6 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; interrupt-parent = <&gic>; + always-on; }; }; diff --git a/dts/src/arm64/nvidia/tegra210-p2180.dtsi b/dts/src/arm64/nvidia/tegra210-p2180.dtsi index 4dcd0d3618..27723829d0 100644 --- a/dts/src/arm64/nvidia/tegra210-p2180.dtsi +++ b/dts/src/arm64/nvidia/tegra210-p2180.dtsi @@ -264,6 +264,19 @@ }; }; + i2c@7000c500 { + /* module ID EEPROM */ + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; + }; + pmc@7000e400 { nvidia,invert-interrupt; }; @@ -328,7 +341,8 @@ regulator-max-microvolt = <1320000>; enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; regulator-ramp-delay = <80>; - regulator-enable-ramp-delay = <1000>; + regulator-enable-ramp-delay = <2000>; + regulator-settling-time-us = <160>; }; }; }; diff --git a/dts/src/arm64/nvidia/tegra210-p2371-2180.dts b/dts/src/arm64/nvidia/tegra210-p2371-2180.dts index 5a57396b59..a3cafe39ba 100644 --- a/dts/src/arm64/nvidia/tegra210-p2371-2180.dts +++ b/dts/src/arm64/nvidia/tegra210-p2371-2180.dts @@ -79,6 +79,19 @@ }; }; + i2c@7000c500 { + /* carrier board ID EEPROM */ + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; + }; + clock@70110000 { status = "okay"; diff --git a/dts/src/arm64/nvidia/tegra210-p3450-0000.dts b/dts/src/arm64/nvidia/tegra210-p3450-0000.dts index 5d0181908f..9d17ec707b 100644 --- a/dts/src/arm64/nvidia/tegra210-p3450-0000.dts +++ b/dts/src/arm64/nvidia/tegra210-p3450-0000.dts @@ -88,6 +88,35 @@ status = "okay"; }; + pwm@7000a000 { + status = "okay"; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + + address-bits = <8>; + page-size = <8>; + size = <256>; + read-only; + }; + }; + hdmi_ddc: i2c@7000c700 { status = "okay"; clock-frequency = <100000>; @@ -515,6 +544,12 @@ cpu@3 { enable-method = "psci"; }; + + idle-states { + cpu-sleep { + status = "okay"; + }; + }; }; gpio-keys { @@ -633,17 +668,16 @@ }; vdd_gpu: regulator@6 { - compatible = "regulator-fixed"; + compatible = "pwm-regulator"; reg = <6>; - + pwms = <&pwm 1 4880>; regulator-name = "VDD_GPU"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-enable-ramp-delay = <250>; - - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - + regulator-min-microvolt = <710000>; + regulator-max-microvolt = <1320000>; + regulator-ramp-delay = <80>; + regulator-enable-ramp-delay = <2000>; + regulator-settling-time-us = <160>; + enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; vin-supply = <&vdd_5v0_sys>; }; }; diff --git a/dts/src/arm64/nvidia/tegra210.dtsi b/dts/src/arm64/nvidia/tegra210.dtsi index a550c0a4d5..659753118e 100644 --- a/dts/src/arm64/nvidia/tegra210.dtsi +++ b/dts/src/arm64/nvidia/tegra210.dtsi @@ -48,6 +48,11 @@ <&tegra_car 72>, <&tegra_car 74>; reset-names = "pex", "afi", "pcie_x"; + + pinctrl-names = "default", "idle"; + pinctrl-0 = <&pex_dpd_disable>; + pinctrl-1 = <&pex_dpd_enable>; + status = "disabled"; pci@1,0 { @@ -848,6 +853,20 @@ pins = "sdmmc3"; power-source = <TEGRA_IO_PAD_VOLTAGE_1V8>; }; + + pex_dpd_disable: pex_en { + pex-dpd-disable { + pins = "pex-bias", "pex-clk1", "pex-clk2"; + low-power-disable; + }; + }; + + pex_dpd_enable: pex_dis { + pex-dpd-enable { + pins = "pex-bias", "pex-clk1", "pex-clk2"; + low-power-enable; + }; + }; }; fuse@7000f800 { @@ -1258,7 +1277,7 @@ compatible = "nvidia,tegra210-agic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x702f9000 0x2000>, + reg = <0x702f9000 0x1000>, <0x702fa000 0x2000>; interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&tegra_car TEGRA210_CLK_APE>; @@ -1430,6 +1449,7 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; interrupt-parent = <&gic>; + arm,no-tick-in-suspend; }; soctherm: thermal-sensor@700e2000 { diff --git a/dts/src/arm64/qcom/msm8916.dtsi b/dts/src/arm64/qcom/msm8916.dtsi index dacd465fc6..5ea9fb8f2f 100644 --- a/dts/src/arm64/qcom/msm8916.dtsi +++ b/dts/src/arm64/qcom/msm8916.dtsi @@ -102,7 +102,7 @@ reg = <0x0>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; @@ -114,7 +114,7 @@ reg = <0x1>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; @@ -126,7 +126,7 @@ reg = <0x2>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; @@ -138,7 +138,7 @@ reg = <0x3>; next-level-cache = <&L2_0>; enable-method = "psci"; - cpu-idle-states = <&CPU_SPC>; + cpu-idle-states = <&CPU_SLEEP_0>; clocks = <&apcs>; operating-points-v2 = <&cpu_opp_table>; #cooling-cells = <2>; @@ -150,8 +150,11 @@ }; idle-states { - CPU_SPC: spc { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { compatible = "arm,idle-state"; + idle-state-name = "standalone-power-collapse"; arm,psci-suspend-param = <0x40000002>; entry-latency-us = <130>; exit-latency-us = <150>; @@ -1164,7 +1167,7 @@ }; funnel@821000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x821000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; @@ -1277,7 +1280,7 @@ }; funnel@841000 { /* APSS funnel only 4 inputs are used */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0x841000 0x1000>; clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>; diff --git a/dts/src/arm64/qcom/msm8996.dtsi b/dts/src/arm64/qcom/msm8996.dtsi index 942465d8ae..96c0a481f4 100644 --- a/dts/src/arm64/qcom/msm8996.dtsi +++ b/dts/src/arm64/qcom/msm8996.dtsi @@ -94,6 +94,8 @@ compatible = "qcom,kryo"; reg = <0x0 0x0>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "cache"; @@ -106,6 +108,8 @@ compatible = "qcom,kryo"; reg = <0x0 0x1>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; next-level-cache = <&L2_0>; }; @@ -114,6 +118,8 @@ compatible = "qcom,kryo"; reg = <0x0 0x100>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; next-level-cache = <&L2_1>; L2_1: l2-cache { compatible = "cache"; @@ -126,6 +132,8 @@ compatible = "qcom,kryo"; reg = <0x0 0x101>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; + capacity-dmips-mhz = <1024>; next-level-cache = <&L2_1>; }; @@ -150,6 +158,19 @@ }; }; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "standalone-power-collapse"; + arm,psci-suspend-param = <0x00000004>; + entry-latency-us = <130>; + exit-latency-us = <80>; + min-residency-us = <300>; + }; + }; }; thermal-zones { @@ -846,10 +867,11 @@ clock-names = "ref_clk_src", "ref_clk"; clocks = <&rpmcc RPM_SMD_LN_BB_CLK>, <&gcc GCC_UFS_CLKREF_CLK>; + resets = <&ufshc 0>; status = "disabled"; }; - ufshc@624000 { + ufshc: ufshc@624000 { compatible = "qcom,ufshc"; reg = <0x624000 0x2500>; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; @@ -905,6 +927,7 @@ <0 0>; lanes-per-direction = <1>; + #reset-cells = <1>; status = "disabled"; ufs_variant { @@ -1154,7 +1177,6 @@ clock-names = "iface", "bus"; #iommu-cells = <1>; - status = "disabled"; }; camss: camss@a00000 { @@ -1307,8 +1329,6 @@ clock-names = "iface", "bus"; power-domains = <&mmcc GPU_GDSC>; - - status = "disabled"; }; mdp_smmu: arm,smmu@d00000 { @@ -1325,8 +1345,6 @@ clock-names = "iface", "bus"; power-domains = <&mmcc MDSS_GDSC>; - - status = "disabled"; }; lpass_q6_smmu: arm,smmu-lpass_q6@1600000 { @@ -1353,7 +1371,6 @@ clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>, <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>; clock-names = "iface", "bus"; - status = "disabled"; }; agnoc@0 { @@ -1674,7 +1691,7 @@ #interrupt-cells = <1>; clocks = <&mmcc MDSS_AHB_CLK>; - clock-names = "iface_clk"; + clock-names = "iface"; #address-cells = <1>; #size-cells = <1>; @@ -1693,11 +1710,11 @@ <&mmcc MDSS_MDP_CLK>, <&mmcc SMMU_MDP_AXI_CLK>, <&mmcc MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "core_clk", - "iommu_clk", - "vsync_clk"; + clock-names = "iface", + "bus", + "core", + "iommu", + "vsync"; iommus = <&mdp_smmu 0>; @@ -1732,11 +1749,11 @@ <&mmcc MDSS_HDMI_AHB_CLK>, <&mmcc MDSS_EXTPCLK_CLK>; clock-names = - "mdp_core_clk", - "iface_clk", - "core_clk", - "alt_iface_clk", - "extp_clk"; + "mdp_core", + "iface", + "core", + "alt_iface", + "extp"; phys = <&hdmi_phy>; phy-names = "hdmi_phy"; @@ -1773,8 +1790,8 @@ clocks = <&mmcc MDSS_AHB_CLK>, <&gcc GCC_HDMI_CLKREF_CLK>; - clock-names = "iface_clk", - "ref_clk"; + clock-names = "iface", + "ref"; }; }; }; @@ -1814,7 +1831,7 @@ power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>; compatible = "qcom,apr-v2"; qcom,smd-channels = "apr_audio_svc"; - reg = <APR_DOMAIN_ADSP>; + qcom,apr-domain = <APR_DOMAIN_ADSP>; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/qcom/msm8998-mtp.dtsi b/dts/src/arm64/qcom/msm8998-mtp.dtsi index f09f3e03f7..108667ce4f 100644 --- a/dts/src/arm64/qcom/msm8998-mtp.dtsi +++ b/dts/src/arm64/qcom/msm8998-mtp.dtsi @@ -27,6 +27,23 @@ status = "okay"; }; +&pm8005_lsid1 { + pm8005-regulators { + compatible = "qcom,pm8005-regulators"; + + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* hack until we rig up the gpu consumer */ + regulator-always-on; + }; + }; +}; + &qusb2phy { status = "okay"; diff --git a/dts/src/arm64/qcom/msm8998.dtsi b/dts/src/arm64/qcom/msm8998.dtsi index 574be78a93..c13ed7aeb1 100644 --- a/dts/src/arm64/qcom/msm8998.dtsi +++ b/dts/src/arm64/qcom/msm8998.dtsi @@ -4,6 +4,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8998.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/gpio/gpio.h> / { @@ -78,6 +79,7 @@ compatible = "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "arm,arch-cache"; @@ -96,6 +98,7 @@ compatible = "arm,armv8"; reg = <0x0 0x1>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_1: l1-icache { compatible = "arm,arch-cache"; @@ -110,6 +113,7 @@ compatible = "arm,armv8"; reg = <0x0 0x2>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_2: l1-icache { compatible = "arm,arch-cache"; @@ -124,6 +128,7 @@ compatible = "arm,armv8"; reg = <0x0 0x3>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; next-level-cache = <&L2_0>; L1_I_3: l1-icache { compatible = "arm,arch-cache"; @@ -138,6 +143,7 @@ compatible = "arm,armv8"; reg = <0x0 0x100>; enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L2_1: l2-cache { compatible = "arm,arch-cache"; @@ -156,6 +162,7 @@ compatible = "arm,armv8"; reg = <0x0 0x101>; enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_101: l1-icache { compatible = "arm,arch-cache"; @@ -170,6 +177,7 @@ compatible = "arm,armv8"; reg = <0x0 0x102>; enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_102: l1-icache { compatible = "arm,arch-cache"; @@ -184,6 +192,7 @@ compatible = "arm,armv8"; reg = <0x0 0x103>; enable-method = "psci"; + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; next-level-cache = <&L2_1>; L1_I_103: l1-icache { compatible = "arm,arch-cache"; @@ -230,6 +239,48 @@ }; }; }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-retention"; + arm,psci-suspend-param = <0x00000002>; + entry-latency-us = <81>; + exit-latency-us = <86>; + min-residency-us = <200>; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <273>; + exit-latency-us = <612>; + min-residency-us = <1000>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-retention"; + arm,psci-suspend-param = <0x00000002>; + entry-latency-us = <79>; + exit-latency-us = <82>; + min-residency-us = <200>; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <336>; + exit-latency-us = <525>; + min-residency-us = <1000>; + local-timer-stop; + }; + }; }; firmware { @@ -264,6 +315,56 @@ compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc"; #clock-cells = <1>; }; + + rpmpd: power-controller { + compatible = "qcom,msm8998-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <16>; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = <32>; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = <48>; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = <64>; + }; + + rpmpd_opp_svs: opp5 { + opp-level = <128>; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = <192>; + }; + + rpmpd_opp_nom: opp7 { + opp-level = <256>; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = <320>; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = <384>; + }; + + rpmpd_opp_turbo_plus: opp10 { + opp-level = <512>; + }; + }; + }; }; }; @@ -758,6 +859,90 @@ #thermal-sensor-cells = <1>; }; + anoc1_smmu: iommu@1680000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x01680000 0x10000>; + #iommu-cells = <1>; + + #global-interrupts = <0>; + interrupts = + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>; + }; + + pcie0: pci@1c00000 { + compatible = "qcom,pcie-msm8996"; + reg = <0x01c00000 0x2000>, + <0x1b000000 0xf1d>, + <0x1b000f20 0xa8>, + <0x1b100000 0x100000>; + reg-names = "parf", "dbi", "elbi", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + num-lanes = <1>; + phys = <&pciephy>; + phy-names = "pciephy"; + + ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>, + <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>; + + #interrupt-cells = <1>; + interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 135 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc 0 136 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc 0 138 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc 0 139 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>; + clock-names = "pipe", "bus_master", "bus_slave", "cfg", "aux"; + + power-domains = <&gcc PCIE_0_GDSC>; + iommu-map = <0x100 &anoc1_smmu 0x1480 1>; + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + }; + + phy@1c06000 { + compatible = "qcom,msm8998-qmp-pcie-phy"; + reg = <0x01c06000 0x18c>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_CLKREF_CLK>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>; + reset-names = "phy", "common"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + + pciephy: lane@1c06800 { + reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>; + #phy-cells = <0>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "pcie_0_pipe_clk_src"; + #clock-cells = <0>; + }; + }; + tcsr_mutex_regs: syscon@1f40000 { compatible = "syscon"; reg = <0x1f40000 0x20000>; diff --git a/dts/src/arm64/qcom/pm8998.dtsi b/dts/src/arm64/qcom/pm8998.dtsi index d3ca35a940..051a52df80 100644 --- a/dts/src/arm64/qcom/pm8998.dtsi +++ b/dts/src/arm64/qcom/pm8998.dtsi @@ -39,7 +39,7 @@ #size-cells = <0>; pm8998_pon: pon@800 { - compatible = "qcom,pm8916-pon"; + compatible = "qcom,pm8998-pon"; reg = <0x800>; mode-bootloader = <0x2>; diff --git a/dts/src/arm64/qcom/pms405.dtsi b/dts/src/arm64/qcom/pms405.dtsi index e8e186bc1e..14240fedd9 100644 --- a/dts/src/arm64/qcom/pms405.dtsi +++ b/dts/src/arm64/qcom/pms405.dtsi @@ -98,7 +98,7 @@ qcom,pre-scaling = <1 1>; }; - vph_pwr { + pon_1: vph_pwr { reg = <ADC5_VPH_PWR>; qcom,pre-scaling = <1 3>; }; @@ -108,18 +108,24 @@ qcom,pre-scaling = <1 1>; }; - xo_therm_100k_pu { - reg = <ADC5_XO_THERM_100K_PU>; + pa_therm1: thermistor1 { + reg = <ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; - amux_thm1_100k_pu { - reg = <ADC5_AMUX_THM1_100K_PU>; + pa_therm3: thermistor3 { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; - amux_thm3_100k_pu { - reg = <ADC5_AMUX_THM3_100K_PU>; + xo_therm: xo_temp { + reg = <ADC5_XO_THERM_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; qcom,pre-scaling = <1 1>; }; }; diff --git a/dts/src/arm64/qcom/qcs404-evb.dtsi b/dts/src/arm64/qcom/qcs404-evb.dtsi index 2c3127167e..11c0a71378 100644 --- a/dts/src/arm64/qcom/qcs404-evb.dtsi +++ b/dts/src/arm64/qcom/qcs404-evb.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0 // Copyright (c) 2018, Linaro Limited +#include <dt-bindings/gpio/gpio.h> #include "qcs404.dtsi" #include "pms405.dtsi" @@ -56,18 +57,41 @@ qcom,controlled-remotely; }; +&gcc { + protected-clocks = <GCC_BIMC_CDSP_CLK>, + <GCC_CDSP_CFG_AHB_CLK>, + <GCC_CDSP_BIMC_CLK_SRC>, + <GCC_CDSP_TBU_CLK>; +}; + &pms405_spmi_regulators { - vdd_s3-supply = <&pms405_s3>; + vdd_s3-supply = <&vph_pwr>; pms405_s3: s3 { regulator-always-on; regulator-boot-on; regulator-name = "vdd_apc"; regulator-min-microvolt = <1048000>; - regulator-max-microvolt = <1352000>; + regulator-max-microvolt = <1384000>; }; }; +&pcie { + status = "ok"; + + perst-gpio = <&tlmm 43 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&perst_state>; +}; + +&pcie_phy { + status = "ok"; + + vdda-vp-supply = <&vreg_l3_1p05>; + vdda-vph-supply = <&vreg_l5_1p8>; +}; + &remoteproc_adsp { status = "ok"; }; @@ -118,7 +142,7 @@ }; vreg_l3_1p05: l3 { - regulator-min-microvolt = <1050000>; + regulator-min-microvolt = <1048000>; regulator-max-microvolt = <1160000>; }; @@ -184,6 +208,15 @@ }; &tlmm { + perst_state: perst { + pins = "gpio43"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + output-low; + }; + sdc1_on: sdc1-on { clk { pins = "sdc1_clk"; @@ -200,7 +233,7 @@ data { pins = "sdc1_data"; bias-pull-up; - dreive-strength = <10>; + drive-strength = <10>; }; rclk { @@ -225,7 +258,7 @@ data { pins = "sdc1_data"; bias-pull-up; - dreive-strength = <2>; + drive-strength = <2>; }; rclk { diff --git a/dts/src/arm64/qcom/qcs404.dtsi b/dts/src/arm64/qcom/qcs404.dtsi index ffedf9640a..3d07897750 100644 --- a/dts/src/arm64/qcom/qcs404.dtsi +++ b/dts/src/arm64/qcom/qcs404.dtsi @@ -3,7 +3,10 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-qcs404.h> +#include <dt-bindings/clock/qcom,turingcc-qcs404.h> #include <dt-bindings/clock/qcom,rpmcc.h> +#include <dt-bindings/power/qcom-rpmpd.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -30,7 +33,9 @@ compatible = "arm,cortex-a53"; reg = <0x100>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; + #cooling-cells = <2>; }; CPU1: cpu@101 { @@ -38,7 +43,9 @@ compatible = "arm,cortex-a53"; reg = <0x101>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; + #cooling-cells = <2>; }; CPU2: cpu@102 { @@ -46,7 +53,9 @@ compatible = "arm,cortex-a53"; reg = <0x102>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; + #cooling-cells = <2>; }; CPU3: cpu@103 { @@ -54,13 +63,29 @@ compatible = "arm,cortex-a53"; reg = <0x103>; enable-method = "psci"; + cpu-idle-states = <&CPU_SLEEP_0>; next-level-cache = <&L2_0>; + #cooling-cells = <2>; }; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; }; + + idle-states { + entry-method = "psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "standalone-power-collapse"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <125>; + exit-latency-us = <180>; + min-residency-us = <595>; + local-timer-stop; + }; + }; }; firmware { @@ -81,99 +106,6 @@ method = "smc"; }; - remoteproc_adsp: remoteproc-adsp { - compatible = "qcom,qcs404-adsp-pas"; - - interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&xo_board>; - clock-names = "xo"; - - memory-region = <&adsp_fw_mem>; - - qcom,smem-states = <&adsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; - - qcom,remote-pid = <2>; - mboxes = <&apcs_glb 8>; - - label = "adsp"; - }; - }; - - remoteproc_cdsp: remoteproc-cdsp { - compatible = "qcom,qcs404-cdsp-pas"; - - interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&xo_board>; - clock-names = "xo"; - - memory-region = <&cdsp_fw_mem>; - - qcom,smem-states = <&cdsp_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; - - qcom,remote-pid = <5>; - mboxes = <&apcs_glb 12>; - - label = "cdsp"; - }; - }; - - remoteproc_wcss: remoteproc-wcss { - compatible = "qcom,qcs404-wcss-pas"; - - interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, - <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, - <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, - <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, - <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&xo_board>; - clock-names = "xo"; - - memory-region = <&wlan_fw_mem>; - - qcom,smem-states = <&wcss_smp2p_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; - - qcom,remote-pid = <1>; - mboxes = <&apcs_glb 16>; - - label = "wcss"; - }; - }; - reserved-memory { #address-cells = <2>; #size-cells = <2>; @@ -230,6 +162,60 @@ compatible = "qcom,rpmcc-qcs404"; #clock-cells = <1>; }; + + rpmpd: power-controller { + compatible = "qcom,qcs404-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <16>; + }; + + rpmpd_opp_ret_plus: opp2 { + opp-level = <32>; + }; + + rpmpd_opp_min_svs: opp3 { + opp-level = <48>; + }; + + rpmpd_opp_low_svs: opp4 { + opp-level = <64>; + }; + + rpmpd_opp_svs: opp5 { + opp-level = <128>; + }; + + rpmpd_opp_svs_plus: opp6 { + opp-level = <192>; + }; + + rpmpd_opp_nom: opp7 { + opp-level = <256>; + }; + + rpmpd_opp_nom_plus: opp8 { + opp-level = <320>; + }; + + rpmpd_opp_turbo: opp9 { + opp-level = <384>; + }; + + rpmpd_opp_turbo_no_cpr: opp10 { + opp-level = <416>; + }; + + rpmpd_opp_turbo_plus: opp11 { + opp-level = <512>; + }; + }; + }; }; }; @@ -254,11 +240,32 @@ ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; + turingcc: clock-controller@800000 { + compatible = "qcom,qcs404-turingcc"; + reg = <0x00800000 0x30000>; + clocks = <&gcc GCC_CDSP_CFG_AHB_CLK>; + + #clock-cells = <1>; + #reset-cells = <1>; + + status = "disabled"; + }; + rpm_msg_ram: memory@60000 { compatible = "qcom,rpm-msg-ram"; reg = <0x00060000 0x6000>; }; + qfprom: qfprom@a4000 { + compatible = "qcom,qfprom"; + reg = <0x000a4000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + tsens_caldata: caldata@d0 { + reg = <0x1f8 0x14>; + }; + }; + rng: rng@e3000 { compatible = "qcom,prng-ee"; reg = <0x000e3000 0x1000>; @@ -266,6 +273,67 @@ clock-names = "core"; }; + tsens: thermal-sensor@4a9000 { + compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_caldata>; + nvmem-cell-names = "calib"; + #qcom,sensors = <10>; + #thermal-sensor-cells = <1>; + }; + + remoteproc_cdsp: remoteproc@b00000 { + compatible = "qcom,qcs404-cdsp-pas"; + reg = <0x00b00000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 229 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&cdsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>, + <&gcc GCC_CDSP_CFG_AHB_CLK>, + <&gcc GCC_CDSP_TBU_CLK>, + <&gcc GCC_BIMC_CDSP_CLK>, + <&turingcc TURING_WRAPPER_AON_CLK>, + <&turingcc TURING_Q6SS_AHBS_AON_CLK>, + <&turingcc TURING_Q6SS_AHBM_AON_CLK>, + <&turingcc TURING_Q6SS_Q6_AXIM_CLK>; + clock-names = "xo", + "sway", + "tbu", + "bimc", + "ahb_aon", + "q6ss_slave", + "q6ss_master", + "q6_axim"; + + resets = <&gcc GCC_CDSP_RESTART>; + reset-names = "restart"; + + qcom,halt-regs = <&tcsr 0x19004>; + + memory-region = <&cdsp_fw_mem>; + + qcom,smem-states = <&cdsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; + + qcom,remote-pid = <5>; + mboxes = <&apcs_glb 12>; + + label = "cdsp"; + }; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,qcs404-pinctrl"; reg = <0x01000000 0x200000>, @@ -383,6 +451,7 @@ compatible = "qcom,gcc-qcs404"; reg = <0x01800000 0x80000>; #clock-cells = <1>; + #reset-cells = <1>; assigned-clocks = <&gcc GCC_APSS_AHB_CLK_SRC>; assigned-clock-rates = <19200000>; @@ -393,6 +462,11 @@ reg = <0x01905000 0x20000>; }; + tcsr: syscon@1937000 { + compatible = "syscon"; + reg = <0x01937000 0x25000>; + }; + spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0200f000 0x001000>, @@ -411,6 +485,53 @@ #interrupt-cells = <4>; }; + remoteproc_wcss: remoteproc@7400000 { + compatible = "qcom,qcs404-wcss-pas"; + reg = <0x07400000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 153 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&wlan_fw_mem>; + + qcom,smem-states = <&wcss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; + + qcom,remote-pid = <1>; + mboxes = <&apcs_glb 16>; + + label = "wcss"; + }; + }; + + pcie_phy: phy@7786000 { + compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; + reg = <0x07786000 0xb8>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, + <&gcc 21>; + reset-names = "phy", "pipe"; + + clock-output-names = "pcie_0_pipe_clk"; + #phy-cells = <0>; + + status = "disabled"; + }; + sdcc1: sdcc@7804000 { compatible = "qcom,sdhci-msm-v5"; reg = <0x07804000 0x1000>, <0x7805000 0x1000>; @@ -796,6 +917,88 @@ status = "disabled"; }; }; + + remoteproc_adsp: remoteproc@c700000 { + compatible = "qcom,qcs404-adsp-pas"; + reg = <0x0c700000 0x4040>; + + interrupts-extended = <&intc GIC_SPI 293 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&adsp_fw_mem>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>; + + qcom,remote-pid = <2>; + mboxes = <&apcs_glb 8>; + + label = "adsp"; + }; + }; + + pcie: pci@10000000 { + compatible = "qcom,pcie-qcs404", "snps,dw-pcie"; + reg = <0x10000000 0xf1d>, + <0x10000f20 0xa8>, + <0x07780000 0x2000>, + <0x10001000 0x2000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x81000000 0 0 0x10003000 0 0x00010000>, /* I/O */ + <0x82000000 0 0x10013000 0x10013000 0 0x007ed000>; /* memory */ + + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>; + clock-names = "iface", "aux", "master_bus", "slave_bus"; + + resets = <&gcc 18>, + <&gcc 17>, + <&gcc 15>, + <&gcc 19>, + <&gcc GCC_PCIE_0_BCR>, + <&gcc 16>; + reset-names = "axi_m", + "axi_s", + "axi_m_sticky", + "pipe_sticky", + "pwr", + "ahb"; + + phys = <&pcie_phy>; + phy-names = "pciephy"; + + status = "disabled"; + }; }; timer { @@ -865,4 +1068,251 @@ #interrupt-cells = <2>; }; }; + + thermal-zones { + aoss-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + aoss_alert0: trip-point@0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + q6-hvx-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + q6_hvx_alert0: trip-point@0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + lpass-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + lpass_alert0: trip-point@0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + wlan-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + wlan_alert0: trip-point@0 { + temperature = <105000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 4>; + + trips { + cluster_alert0: trip-point@0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster_alert1: trip-point@1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cluster_crit: cluster_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cluster_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu0_alert0: trip-point@0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu0_alert1: trip-point@1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu0_crit: cpu_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu1_alert0: trip-point@0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu1_alert1: trip-point@1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu1_crit: cpu_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu2_alert0: trip-point@0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu2_alert1: trip-point@1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu2_crit: cpu_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu3_alert0: trip-point@0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + cpu3_alert1: trip-point@1 { + temperature = <105000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu3_crit: cpu_crit { + temperature = <120000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + gpu_alert0: trip-point@0 { + temperature = <95000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; }; diff --git a/dts/src/arm64/qcom/sdm845-cheza-r1.dts b/dts/src/arm64/qcom/sdm845-cheza-r1.dts new file mode 100644 index 0000000000..bd7c25bb8d --- /dev/null +++ b/dts/src/arm64/qcom/sdm845-cheza-r1.dts @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza board device tree source + * + * Copyright 2018 Google LLC. + */ + +/dts-v1/; + +#include "sdm845-cheza.dtsi" + +/ { + model = "Google Cheza (rev1)"; + compatible = "google,cheza-rev1", "qcom,sdm845"; + + /* + * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children + */ + + /* + * NOTE: Technically pp3500_a is not the exact same signal as + * pp3500_a_vbob (there's a load switch between them and the EC can + * control pp3500_a via "en_pp3300_a"), but from the AP's point of + * view they are the same. + */ + pp3500_a: + pp3500_a_vbob: pp3500-a-vbob-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob"; + + /* + * Comes on automatically when pp5000_ldo comes on, which + * comes on automatically when ppvar_sys comes on + */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_dx_edp: pp3300-dx-edp-regulator { + /* Yes, it's really 3.5 despite the name of the signal */ + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&pp3500_a>; + }; +}; + +/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */ + +/* + * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware + * that limits them to 3.0, and trying to run at 3.3V with that old firmware + * prevents the system from booting. + */ +&src_pp3000_l19a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_pp3300_l22a { + /delete-property/regulator-boot-on; + /delete-property/regulator-always-on; +}; + +&src_pp3300_l28a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_vreg_bob { + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + vin-supply = <&pp3500_a_vbob>; +}; + +/* + * NON-REGULATOR OVERRIDES + * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label + */ + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "", + "FP_RST_L", + "FCAM_EN", + "", + "EDP_BRIJ_IRQ", + "EC_IN_RW_ODL", + "", + "RCAM_MCLK", + "FCAM_MCLK", + "", + "RCAM_EN", + "CCI0_SDA", + "CCI0_SCL", + "CCI1_SDA", + "CCI1_SCL", + "FCAM_RST_L", + "", + "PEN_RST_L", + "PEN_IRQ_L", + "", + "RCAM_VSYNC", + "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "AP_PEN_1V8_SDA", + "AP_PEN_1V8_SCL", + "AP_TS_I2C_SDA", + "AP_TS_I2C_SCL", + "RCAM_RST_L", + "", + "AP_EDP_BKLTEN", + "AP_BRD_ID1", + "BOOT_CONFIG_4", + "AMP_IRQ_L", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "EN_PP3300_DX_EDP", + "SD_CD_ODL", + "BT_UART_RTS", + "BT_UART_CTS", + "BT_UART_RXD", + "BT_UART_TXD", + "AMP_I2C_SDA", + "AMP_I2C_SCL", + "AP_BRD_ID3", + "", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DOUT", + "AMP_DIN", + "AP_BRD_ID2", + "PEN_PDCT_L", + "HP_MCLK", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "", + "", + "", + "", + "BT_SLIMBUS_DATA", + "BT_SLIMBUS_CLK", + "AMP_RESET_L", + "", + "FCAM_VSYNC", + "", + "AP_SKU_ID1", + "EC_WOV_BCLK", + "EC_WOV_LRCLK", + "EC_WOV_DOUT", + "", + "", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "AP_SPI_CS0_L", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "", + "", + "AP_SPI_CLK", + "", + "RFFE6_CLK", + "RFFE6_DATA", + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_0", + "EDP_BRIJ_EN", + "", + "USB_HS_TX_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "AP_SKU_ID2", + "SDM_GRFC_8", + "SDM_GRFC_9", + "AP_RST_REQ", + "HP_IRQ", + "TS_RESET_L", + "PEN_EJECT_ODL", + "HUB_RST_L", + "FP_TO_AP_IRQ", + "AP_EC_INT_L", + "", + "", + "TS_INT_L", + "AP_SUSPEND_L", + "SDM_GRFC_3", + "", + "H1_AP_INT_ODL", + "QLINK_REQ", + "QLINK_EN", + "SDM_GRFC_2", + "BOOT_CONFIG_3", + "WMSS_RESET_L", + "SDM_GRFC_0", + "SDM_GRFC_1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "AP_RAM_ID1", + "AP_RAM_ID2", + "RFFE1_DATA", + "RFFE1_CLK"; +}; diff --git a/dts/src/arm64/qcom/sdm845-cheza-r2.dts b/dts/src/arm64/qcom/sdm845-cheza-r2.dts new file mode 100644 index 0000000000..2b7230594e --- /dev/null +++ b/dts/src/arm64/qcom/sdm845-cheza-r2.dts @@ -0,0 +1,238 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza board device tree source + * + * Copyright 2018 Google LLC. + */ + +/dts-v1/; + +#include "sdm845-cheza.dtsi" + +/ { + model = "Google Cheza (rev2)"; + compatible = "google,cheza-rev2", "qcom,sdm845"; + + /* + * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children + */ + + /* + * NOTE: Technically pp3500_a is not the exact same signal as + * pp3500_a_vbob (there's a load switch between them and the EC can + * control pp3500_a via "en_pp3300_a"), but from the AP's point of + * view they are the same. + */ + pp3500_a: + pp3500_a_vbob: pp3500-a-vbob-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_bob"; + + /* + * Comes on automatically when pp5000_ldo comes on, which + * comes on automatically when ppvar_sys comes on + */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_dx_edp: pp3300-dx-edp-regulator { + /* Yes, it's really 3.5 despite the name of the signal */ + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + + vin-supply = <&pp3500_a>; + }; +}; + +/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */ + +/* + * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware + * that limits them to 3.0, and trying to run at 3.3V with that old firmware + * prevents the system from booting. + */ +&src_pp3000_l19a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_pp3300_l22a { + /delete-property/regulator-boot-on; + /delete-property/regulator-always-on; +}; + +&src_pp3300_l28a { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; +}; + +&src_vreg_bob { + regulator-min-microvolt = <3500000>; + regulator-max-microvolt = <3500000>; + vin-supply = <&pp3500_a_vbob>; +}; + +/* + * NON-REGULATOR OVERRIDES + * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label + */ + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "BRIJ_SUSPEND", + "FP_RST_L", + "FCAM_EN", + "", + "EDP_BRIJ_IRQ", + "EC_IN_RW_ODL", + "", + "RCAM_MCLK", + "FCAM_MCLK", + "", + "RCAM_EN", + "CCI0_SDA", + "CCI0_SCL", + "CCI1_SDA", + "CCI1_SCL", + "FCAM_RST_L", + "FPMCU_BOOT0", + "PEN_RST_L", + "PEN_IRQ_L", + "FPMCU_SEL_OD", + "RCAM_VSYNC", + "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "AP_PEN_1V8_SDA", + "AP_PEN_1V8_SCL", + "AP_TS_I2C_SDA", + "AP_TS_I2C_SCL", + "RCAM_RST_L", + "", + "AP_EDP_BKLTEN", + "AP_BRD_ID1", + "BOOT_CONFIG_4", + "AMP_IRQ_L", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "EN_PP3300_DX_EDP", + "SD_CD_ODL", + "BT_UART_RTS", + "BT_UART_CTS", + "BT_UART_RXD", + "BT_UART_TXD", + "AMP_I2C_SDA", + "AMP_I2C_SCL", + "AP_BRD_ID3", + "", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DOUT", + "AMP_DIN", + "AP_BRD_ID2", + "PEN_PDCT_L", + "HP_MCLK", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "", + "", + "", + "", + "BT_SLIMBUS_DATA", + "BT_SLIMBUS_CLK", + "AMP_RESET_L", + "", + "FCAM_VSYNC", + "", + "AP_SKU_ID1", + "EC_WOV_BCLK", + "EC_WOV_LRCLK", + "EC_WOV_DOUT", + "", + "", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "AP_SPI_CS0_L", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "", + "", + "AP_SPI_CLK", + "", + "RFFE6_CLK", + "RFFE6_DATA", + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_0", + "EDP_BRIJ_EN", + "", + "USB_HS_TX_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "AP_SKU_ID2", + "SDM_GRFC_8", + "SDM_GRFC_9", + "AP_RST_REQ", + "HP_IRQ", + "TS_RESET_L", + "PEN_EJECT_ODL", + "HUB_RST_L", + "FP_TO_AP_IRQ", + "AP_EC_INT_L", + "", + "", + "TS_INT_L", + "AP_SUSPEND_L", + "SDM_GRFC_3", + "", + "H1_AP_INT_ODL", + "QLINK_REQ", + "QLINK_EN", + "SDM_GRFC_2", + "BOOT_CONFIG_3", + "WMSS_RESET_L", + "SDM_GRFC_0", + "SDM_GRFC_1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "AP_RAM_ID1", + "AP_RAM_ID2", + "RFFE1_DATA", + "RFFE1_CLK"; +}; diff --git a/dts/src/arm64/qcom/sdm845-cheza-r3.dts b/dts/src/arm64/qcom/sdm845-cheza-r3.dts new file mode 100644 index 0000000000..1ba67be08f --- /dev/null +++ b/dts/src/arm64/qcom/sdm845-cheza-r3.dts @@ -0,0 +1,174 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza board device tree source + * + * Copyright 2018 Google LLC. + */ + +/dts-v1/; + +#include "sdm845-cheza.dtsi" + +/ { + model = "Google Cheza (rev3+)"; + compatible = "google,cheza", "qcom,sdm845"; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "BRIJ_SUSPEND", + "FP_RST_L", + "FCAM_EN", + "", + "EDP_BRIJ_IRQ", + "EC_IN_RW_ODL", + "", + "RCAM_MCLK", + "FCAM_MCLK", + "", + "RCAM_EN", + "CCI0_SDA", + "CCI0_SCL", + "CCI1_SDA", + "CCI1_SCL", + "FCAM_RST_L", + "FPMCU_BOOT0", + "PEN_RST_L", + "PEN_IRQ_L", + "FPMCU_SEL_OD", + "RCAM_VSYNC", + "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "AP_PEN_1V8_SDA", + "AP_PEN_1V8_SCL", + "AP_TS_I2C_SDA", + "AP_TS_I2C_SCL", + "RCAM_RST_L", + "", + "AP_EDP_BKLTEN", + "AP_BRD_ID0", + "BOOT_CONFIG_4", + "AMP_IRQ_L", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "EN_PP3300_DX_EDP", + "SD_CD_ODL", + "BT_UART_RTS", + "BT_UART_CTS", + "BT_UART_RXD", + "BT_UART_TXD", + "AMP_I2C_SDA", + "AMP_I2C_SCL", + "AP_BRD_ID2", + "", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DOUT", + "AMP_DIN", + "AP_BRD_ID1", + "PEN_PDCT_L", + "HP_MCLK", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "", + "", + "", + "", + "BT_SLIMBUS_DATA", + "BT_SLIMBUS_CLK", + "AMP_RESET_L", + "", + "FCAM_VSYNC", + "", + "AP_SKU_ID0", + "EC_WOV_BCLK", + "EC_WOV_LRCLK", + "EC_WOV_DOUT", + "", + "", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "AP_SPI_CS0_L", + "AP_SPI_MOSI", + "AP_SPI_MISO", + "", + "", + "AP_SPI_CLK", + "", + "RFFE6_CLK", + "RFFE6_DATA", + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_0", + "EDP_BRIJ_EN", + "", + "USB_HS_TX_EN", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "AP_SKU_ID1", + "SDM_GRFC_8", + "SDM_GRFC_9", + "AP_RST_REQ", + "HP_IRQ", + "TS_RESET_L", + "PEN_EJECT_ODL", + "HUB_RST_L", + "FP_TO_AP_IRQ", + "AP_EC_INT_L", + "", + "", + "TS_INT_L", + "AP_SUSPEND_L", + "SDM_GRFC_3", + /* + * AP_FLASH_WP_L is crossystem ABI. Rev3 schematics + * call it BIOS_FLASH_WP_R_L. + */ + "AP_FLASH_WP_L", + "H1_AP_INT_ODL", + "QLINK_REQ", + "QLINK_EN", + "SDM_GRFC_2", + "BOOT_CONFIG_3", + "WMSS_RESET_L", + "SDM_GRFC_0", + "SDM_GRFC_1", + "RFFE3_DATA", + "RFFE3_CLK", + "RFFE4_DATA", + "RFFE4_CLK", + "RFFE5_DATA", + "RFFE5_CLK", + "GNSS_EN", + "WCI2_LTE_COEX_RXD", + "WCI2_LTE_COEX_TXD", + "AP_RAM_ID0", + "AP_RAM_ID1", + "RFFE1_DATA", + "RFFE1_CLK"; +}; diff --git a/dts/src/arm64/qcom/sdm845-cheza.dtsi b/dts/src/arm64/qcom/sdm845-cheza.dtsi new file mode 100644 index 0000000000..1ebbd568df --- /dev/null +++ b/dts/src/arm64/qcom/sdm845-cheza.dtsi @@ -0,0 +1,1326 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Cheza device tree source (common between revisions) + * + * Copyright 2018 Google LLC. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sdm845.dtsi" + +/* PMICs depend on spmi_bus label and so must come after SoC */ +#include "pm8005.dtsi" +#include "pm8998.dtsi" + +/ { + aliases { + bluetooth0 = &bluetooth; + hsuart0 = &uart6; + serial0 = &uart9; + wifi0 = &wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&cros_ec_pwm 0>; + enable-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + power-supply = <&ppvar_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_edp_bklten>; + }; + + /* FIXED REGULATORS - parents above children */ + + /* This is the top level supply and variable voltage */ + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + /* This divides ppvar_sys by 2, so voltage is variable */ + src_vph_pwr: src-vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "src_vph_pwr"; + + /* EC turns on with switchcap_on_l; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; + + pp5000_a: pp5000-a-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp5000_a"; + + /* EC turns on with en_pp5000_a; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&ppvar_sys>; + }; + + src_vreg_bob: src-vreg-bob-regulator { + compatible = "regulator-fixed"; + regulator-name = "src_vreg_bob"; + + /* EC turns on with vbob_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_dx_edp: pp3300-dx-edp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_dx_edp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_dx_edp>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + src_pp1800_s4a: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "src_pp1800_s4a"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&src_vph_pwr>; + }; + + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_eject_odl>; + + pen-insert { + label = "Pen Insert"; + /* Insert = low, eject = high */ + gpios = <&tlmm 119 GPIO_ACTIVE_LOW>; + linux,code = <SW_PEN_INSERTED>; + linux,input-type = <EV_SW>; + wakeup-source; + }; + }; + + panel: panel { + compatible ="innolux,p120zdg-bf1"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + no-hpd; + + ports { + panel_in: port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; +}; + +/* + * Reserved memory changes + * + * Putting this all together (out of order with the rest of the file) to keep + * all modifications to the memory map (from sdm845.dtsi) in one place. + */ + +/* + * Our mpss_region is 8MB bigger than the default one and that conflicts + * with venus_mem and cdsp_mem. + * + * For venus_mem we'll delete and re-create at a different address. + * + * cdsp_mem isn't used on cheza right now so we won't bother re-creating it; but + * that also means we need to delete cdsp_pas. + */ +/delete-node/ &venus_mem; +/delete-node/ &cdsp_mem; +/delete-node/ &cdsp_pas; + +/* Increase the size from 120 MB to 128 MB */ +&mpss_region { + reg = <0 0x8e000000 0 0x8000000>; +}; + +/* Increase the size from 2MB to 8MB */ +&rmtfs_mem { + reg = <0 0x88f00000 0 0x800000>; +}; + +/ { + reserved-memory { + venus_mem: memory@96000000 { + reg = <0 0x96000000 0 0x500000>; + no-map; + }; + }; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk &qspi_cs0 &qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + /* + * In theory chip supports up to 104 MHz and controller up + * to 80 MHz, but above 25 MHz wasn't reliable so we'll use + * that for now. b:117440651 + */ + spi-max-frequency = <25000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&src_vph_pwr>; + vdd-s2-supply = <&src_vph_pwr>; + vdd-s3-supply = <&src_vph_pwr>; + vdd-s4-supply = <&src_vph_pwr>; + vdd-s5-supply = <&src_vph_pwr>; + vdd-s6-supply = <&src_vph_pwr>; + vdd-s7-supply = <&src_vph_pwr>; + vdd-s8-supply = <&src_vph_pwr>; + vdd-s9-supply = <&src_vph_pwr>; + vdd-s10-supply = <&src_vph_pwr>; + vdd-s11-supply = <&src_vph_pwr>; + vdd-s12-supply = <&src_vph_pwr>; + vdd-s13-supply = <&src_vph_pwr>; + vdd-l1-l27-supply = <&src_pp1025_s7a>; + vdd-l2-l8-l17-supply = <&src_pp1350_s3a>; + vdd-l3-l11-supply = <&src_pp1025_s7a>; + vdd-l4-l5-supply = <&src_pp1025_s7a>; + vdd-l6-supply = <&src_vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&src_pp2040_s5a>; + vdd-l9-supply = <&src_pp2040_s5a>; + vdd-l10-l23-l25-supply = <&src_vreg_bob>; + vdd-l13-l19-l21-supply = <&src_vreg_bob>; + vdd-l16-l28-supply = <&src_vreg_bob>; + vdd-l18-l22-supply = <&src_vreg_bob>; + vdd-l20-l24-supply = <&src_vreg_bob>; + vdd-l26-supply = <&src_pp1350_s3a>; + vin-lvs-1-2-supply = <&src_pp1800_s4a>; + + src_pp1125_s2a: smps2 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + src_pp1350_s3a: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + src_pp2040_s5a: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + src_pp1025_s7a: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdd_qusb_hs0: + vdda_hp_pcie_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_dsi0_pll: + vdda_mipi_dsi1_pll: + vdda_qlink_lv: + vdda_qlink_lv_ck: + vdda_qrefs_0p875: + vdda_pcie_core: + vdda_pll_cc_ebi01: + vdda_pll_cc_ebi23: + vdda_sp_sensor: + vdda_ufs1_core: + vdda_ufs2_core: + vdda_usb1_ss_core: + vdda_usb2_ss_core: + src_pp875_l1a: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_10: + src_pp1200_l2a: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + + /* TODO: why??? */ + regulator-always-on; + }; + + pp1000_l3a_sdr845: ldo3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_wcss_cx: + vdd_wcss_mx: + vdda_wcss_pll: + src_pp800_l5a: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_13: + src_pp1800_l6a: ldo6 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <1856000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_l7a_wcn3990: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1200_l8a: ldo8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1248000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1800_dx_pen: + src_pp1800_l9a: ldo9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1800_l10a: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1000_l11a_sdr845: ldo11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1048000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdd_qfprom: + vdd_qfprom_sp: + vdda_apc1_cs_1p8: + vdda_gfx_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + src_pp1800_l12a: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vddpx_2: + src_pp2950_l13a: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1800_l14a: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1800_l15a: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2700_l16a: ldo16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1300_l17a: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp2700_l18a: ldo18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + /* + * NOTE: this rail should have been called + * src_pp3300_l19a in the schematic + */ + src_pp3000_l19a: ldo19 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp2950_l20a: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp2950_l21a: ldo21 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_hub: + src_pp3300_l22a: ldo22 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + /* + * HACK: Should add a usb hub node and driver + * to turn this on and off at suspend/resume time + */ + regulator-boot-on; + regulator-always-on; + }; + + pp3300_l23a_ch1_wcn3990: ldo23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vdda_qusb_hs0_3p1: + src_pp3075_l24a: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_l25a_ch0_wcn3990: ldo25 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp1200_hub: + vdda_hp_pcie_1p2: + vdda_hv_ebi0: + vdda_hv_ebi1: + vdda_hv_ebi2: + vdda_hv_ebi3: + vdda_mipi_csi_1p25: + vdda_mipi_dsi0_1p2: + vdda_mipi_dsi1_1p2: + vdda_pcie_1p2: + vdda_ufs1_1p2: + vdda_ufs2_1p2: + vdda_usb1_ss_1p2: + vdda_usb2_ss_1p2: + src_pp1200_l26a: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + pp3300_dx_pen: + src_pp3300_l28a: ldo28 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + src_pp1800_lvs1: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + src_pp1800_lvs2: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&src_vph_pwr>; + vdd-s2-supply = <&src_vph_pwr>; + vdd-s3-supply = <&src_vph_pwr>; + vdd-s4-supply = <&src_vph_pwr>; + + src_pp600_s3c: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +edp_brij_i2c: &i2c3 { + status = "okay"; + clock-frequency = <400000>; + + sn65dsi86_bridge: bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_brij_en &edp_brij_irq>; + + interrupt-parent = <&tlmm>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&src_pp1800_s4a>; + vccio-supply = <&src_pp1800_s4a>; + vcca-supply = <&src_pp1200_l2a>; + vcc-supply = <&src_pp1200_l2a>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK2>; + clock-names = "refclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + }; +}; + +ap_pen_1v8: &i2c11 { + status = "okay"; + clock-frequency = <400000>; + + digitizer@9 { + compatible = "wacom,w9013", "hid-over-i2c"; + reg = <0x9>; + pinctrl-names = "default"; + pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>; + + vdd-supply = <&pp3300_dx_pen>; + vddl-supply = <&pp1800_dx_pen>; + post-power-on-delay-ms = <100>; + + interrupt-parent = <&tlmm>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x1>; + }; +}; + +amp_i2c: &i2c12 { + status = "okay"; + clock-frequency = <400000>; +}; + +ap_ts_i2c: &i2c14 { + status = "okay"; + clock-frequency = <400000>; + + touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l &ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&src_pp3300_l28a>; + + reset-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>; + }; +}; + +&lpasscc { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_cd_odl>; + + vmmc-supply = <&src_pp2950_l21a>; + vqmmc-supply = <&vddpx_2>; + + cd-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; +}; + +&spi0 { + status = "okay"; +}; + +&spi10 { + status = "okay"; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <122 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_ap_int_l>; + spi-max-frequency = <3000000>; + + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pdupdate { + compatible = "google,cros-ec-pd-update"; + }; + }; +}; + +#include <arm/cros-ec-keyboard.dtsi> +#include <arm/cros-ec-sbs.dtsi> + +&uart6 { + status = "okay"; + + bluetooth: wcn3990-bt { + compatible = "qcom,wcn3990-bt"; + vddio-supply = <&src_pp1800_s4a>; + vddxo-supply = <&pp1800_l7a_wcn3990>; + vddrf-supply = <&src_pp1300_l17a>; + vddch0-supply = <&pp3300_l25a_ch0_wcn3990>; + max-speed = <3200000>; + }; +}; + +&uart9 { + status = "okay"; +}; + +&ufs_mem_hc { + status = "okay"; + pinctrl-names = "init", "default"; + pinctrl-0 = <&ufs_dev_reset_assert>; + pinctrl-1 = <&ufs_dev_reset_deassert>; + + vcc-supply = <&src_pp2950_l20a>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; + + /* We'll use this as USB 2.0 only */ + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + /* + * The hardware design intends this port to be hooked up in peripheral + * mode, so we'll hardcode it here. Some details: + * - SDM845 expects only a single Type C connector so it has only one + * native Type C port but cheza has two Type C connectors. + * - The only source of DP is the single native Type C port. + * - On cheza we want to be able to hook DP up to _either_ of the + * two Type C connectors and want to be able to achieve 4 lanes of DP. + * - When you configure a Type C port for 4 lanes of DP you lose USB3. + * - In order to make everything work, the native Type C port is always + * configured as 4-lanes DP so it's always available. + * - The extra USB3 port on SDM845 goes to a USB 3 hub which is then + * sent to the two Type C connectors. + * - The extra USB2 lines from the native Type C port are always + * setup as "peripheral" so that we can mux them over to one connector + * or the other if someone needs the connector configured as a gadget + * (but they only get USB2 speeds). + * + * All the hardware muxes would allow us to hook things up in different + * ways to some potential benefit for static configurations (you could + * achieve extra USB2 bandwidth by using two different ports for the + * two conenctors or possibly even get USB3 peripheral mode), but in + * each case you end up forcing to disconnect/reconnect an in-use + * USB session in some cases depending on what you hotplug into the + * other connector. Thus hardcoding this as peripheral makes sense. + */ + dr_mode = "peripheral"; + + /* + * We always need the high speed pins as 4-lanes DP in case someone + * hotplugs a DP peripheral. Thus limit this port to a max of high + * speed. + */ + maximum-speed = "high-speed"; + + /* + * We don't need the usb3-phy since we run in highspeed mode always, so + * re-define these properties removing the superspeed USB PHY reference. + */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + /* We have this hooked up to a hub and we always use in host mode */ + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb2_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vdda_usb2_ss_1p2>; + vdda-pll-supply = <&vdda_usb2_ss_core>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&src_pp800_l5a >; + vdd-1.8-xo-supply = <&pp1800_l7a_wcn3990>; + vdd-1.3-rfa-supply = <&src_pp1300_l17a>; + vdd-3.3-ch0-supply = <&pp3300_l25a_ch0_wcn3990>; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qspi_cs0 { + pinconf { + pins = "gpio90"; + bias-disable; + }; +}; + +&qspi_clk { + pinconf { + pins = "gpio95"; + bias-disable; + }; +}; + +&qspi_data01 { + pinconf { + pins = "gpio91", "gpio92"; + + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; + }; +}; + +&qup_i2c3_default { + pinconf { + pins = "gpio41", "gpio42"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c11_default { + pinconf { + pins = "gpio31", "gpio32"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c12_default { + pinconf { + pins = "gpio49", "gpio50"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c14_default { + pinconf { + pins = "gpio33", "gpio34"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_spi0_default { + pinconf { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi5_default { + pinconf { + pins = "gpio85", "gpio86", "gpio87", "gpio88"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi10_default { + pinconf { + pins = "gpio53", "gpio54", "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart6_default { + /* Change pinmux to all 4 pins since CTS and RTS are connected */ + pinmux { + pins = "gpio45", "gpio46", + "gpio47", "gpio48"; + }; + + pinconf-cts { + /* + * Configure a pull-down on 45 (CTS) to match the pull of + * the Bluetooth module. + */ + pins = "gpio45"; + bias-pull-down; + }; + + pinconf-rts-tx { + /* We'll drive 46 (RTS) and 47 (TX), so no pull */ + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + /* + * Configure a pull-up on 48 (RX). This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + pins = "gpio48"; + bias-pull-up; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +/* PINCTRL - board-specific pinctrl */ +&pm8005_gpio { + gpio-line-names = "", + "", + "SLB", + ""; +}; + +&pm8998_adc { + adc-chan@ADC5_AMUX_THM1_100K_PU { + reg = <ADC5_AMUX_THM1_100K_PU>; + label = "sdm_temp"; + }; + + adc-chan@ADC5_AMUX_THM2_100K_PU { + reg = <ADC5_AMUX_THM2_100K_PU>; + label = "quiet_temp"; + }; + + adc-chan@ADC5_AMUX_THM3_100K_PU { + reg = <ADC5_AMUX_THM3_100K_PU>; + label = "lte_temp_1"; + }; + + adc-chan@ADC5_AMUX_THM4_100K_PU { + reg = <ADC5_AMUX_THM4_100K_PU>; + label = "lte_temp_2"; + }; + + adc-chan@ADC5_AMUX_THM5_100K_PU { + reg = <ADC5_AMUX_THM5_100K_PU>; + label = "charger_temp"; + }; +}; + +&pm8998_gpio { + gpio-line-names = "", + "", + "SW_CTRL", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "CFG_OPT1", + "WCSS_PWR_REQ", + "", + "CFG_OPT2", + "SLB"; +}; + +&tlmm { + /* + * pinctrl settings for pins that have no real owners. + */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&bios_flash_wp_r_l>, + <&ap_suspend_l_deassert>; + + pinctrl-1 = <&bios_flash_wp_r_l>, + <&ap_suspend_l_assert>; + + /* + * Hogs prevent usermode from changing the value. A GPIO can be both + * here and in the pinctrl section. + */ + ap-suspend-l-hog { + gpio-hog; + gpios = <126 GPIO_ACTIVE_LOW>; + output-low; + }; + + ap_edp_bklten: ap-edp-bklten { + pinmux { + pins = "gpio37"; + function = "gpio"; + }; + + pinconf { + pins = "gpio37"; + drive-strength = <2>; + bias-disable; + }; + }; + + bios_flash_wp_r_l: bios-flash-wp-r-l { + pinmux { + pins = "gpio128"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio128"; + bias-disable; + }; + }; + + ec_ap_int_l: ec-ap-int-l { + pinmux { + pins = "gpio122"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio122"; + bias-pull-up; + }; + }; + + edp_brij_en: edp-brij-en { + pinmux { + pins = "gpio102"; + function = "gpio"; + }; + + pinconf { + pins = "gpio102"; + drive-strength = <2>; + bias-disable; + }; + }; + + edp_brij_irq: edp-brij-irq { + pinmux { + pins = "gpio10"; + function = "gpio"; + }; + + pinconf { + pins = "gpio10"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + en_pp3300_dx_edp: en-pp3300-dx-edp { + pinmux { + pins = "gpio43"; + function = "gpio"; + }; + + pinconf { + pins = "gpio43"; + drive-strength = <2>; + bias-disable; + }; + }; + + h1_ap_int_odl: h1-ap-int-odl { + pinmux { + pins = "gpio129"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio129"; + bias-pull-up; + }; + }; + + pen_eject_odl: pen-eject-odl { + pinmux { + pins = "gpio119"; + function = "gpio"; + bias-pull-up; + }; + }; + + pen_irq_l: pen-irq-l { + pinmux { + pins = "gpio24"; + function = "gpio"; + }; + + pinconf { + pins = "gpio24"; + + /* Has external pullup */ + bias-disable; + }; + }; + + pen_pdct_l: pen-pdct-l { + pinmux { + pins = "gpio63"; + function = "gpio"; + }; + + pinconf { + pins = "gpio63"; + + /* Has external pullup */ + bias-disable; + }; + }; + + pen_rst_l: pen-rst-l { + pinmux { + pins = "gpio23"; + function = "gpio"; + }; + + pinconf { + pins = "gpio23"; + bias-disable; + drive-strength = <2>; + + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; + }; + }; + + sdc2_clk: sdc2-clk { + pinconf { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16. + */ + drive-strength = <16>; + }; + }; + + sdc2_cmd: sdc2-cmd { + pinconf { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sdc2_data: sdc2-data { + pinconf { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <16>; + }; + }; + + sd_cd_odl: sd-cd-odl { + pinmux { + pins = "gpio44"; + function = "gpio"; + }; + + pinconf { + pins = "gpio44"; + bias-pull-up; + }; + }; + + ts_int_l: ts-int-l { + pinmux { + pins = "gpio125"; + function = "gpio"; + }; + + pinconf { + pins = "gpio125"; + bias-pull-up; + }; + }; + + ts_reset_l: ts-reset-l { + pinmux { + pins = "gpio118"; + function = "gpio"; + }; + + pinconf { + pins = "gpio118"; + bias-disable; + drive-strength = <2>; + }; + }; + + ufs_dev_reset_assert: ufs_dev_reset_assert { + config { + pins = "ufs_reset"; + bias-pull-down; /* default: pull down */ + /* + * UFS_RESET driver strengths are having + * different values/steps compared to typical + * GPIO drive strengths. + * + * Following table clarifies: + * + * HDRV value | UFS_RESET | Typical GPIO + * (dec) | (mA) | (mA) + * 0 | 0.8 | 2 + * 1 | 1.55 | 4 + * 2 | 2.35 | 6 + * 3 | 3.1 | 8 + * 4 | 3.9 | 10 + * 5 | 4.65 | 12 + * 6 | 5.4 | 14 + * 7 | 6.15 | 16 + * + * POR value for UFS_RESET HDRV is 3 which means + * 3.1mA and we want to use that. Hence just + * specify 8mA to "drive-strength" binding and + * that should result into writing 3 to HDRV + * field. + */ + drive-strength = <8>; /* default: 3.1 mA */ + output-low; /* active low reset */ + }; + }; + + ufs_dev_reset_deassert: ufs_dev_reset_deassert { + config { + pins = "ufs_reset"; + bias-pull-down; /* default: pull down */ + /* + * default: 3.1 mA + * check comments under ufs_dev_reset_assert + */ + drive-strength = <8>; + output-high; /* active low reset */ + }; + }; + + ap_suspend_l_assert: ap_suspend_l_assert { + config { + pins = "gpio126"; + function = "gpio"; + bias-no-pull; + drive-strength = <2>; + output-low; + }; + }; + + ap_suspend_l_deassert: ap_suspend_l_deassert { + config { + pins = "gpio126"; + function = "gpio"; + bias-no-pull; + drive-strength = <2>; + output-high; + }; + }; +}; diff --git a/dts/src/arm64/qcom/sdm845-db845c.dts b/dts/src/arm64/qcom/sdm845-db845c.dts new file mode 100644 index 0000000000..71bd717a42 --- /dev/null +++ b/dts/src/arm64/qcom/sdm845-db845c.dts @@ -0,0 +1,557 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019, Linaro Ltd. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + model = "Thundercomm Dragonboard 845c"; + compatible = "thundercomm,db845c", "qcom,sdm845"; + + aliases { + serial0 = &uart9; + hsuart0 = &uart6; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + dc12v: dc12v-regulator { + compatible = "regulator-fixed"; + regulator-name = "DC12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + }; + + gpio_keys { + compatible = "gpio-keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>; + + vol-up { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + user4 { + label = "green:user4"; + gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "panic-indicator"; + default-state = "off"; + }; + + wlan { + label = "yellow:wlan"; + gpios = <&pm8998_gpio 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt { + label = "blue:bt"; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; + + lt9611_1v8: lt9611-vdd18-regulator { + compatible = "regulator-fixed"; + regulator-name = "LT9611_1V8"; + + vin-supply = <&vdc_5v>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + lt9611_3v3: lt9611-3v3 { + compatible = "regulator-fixed"; + regulator-name = "LT9611_3V3"; + + vin-supply = <&vdc_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + // TODO: make it possible to drive same GPIO from two clients + // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + // enable-active-high; + }; + + pcie0_1p05v: pcie-0-1p05v-regulator { + compatible = "regulator-fixed"; + regulator-name = "PCIE0_1.05V"; + + vin-supply = <&vbat>; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + + // TODO: make it possible to drive same GPIO from two clients + // gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; + // enable-active-high; + }; + + pcie0_3p3v_dual: vldo-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VLDO_3V3"; + + vin-supply = <&vbat>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 90 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_pwren_state>; + }; + + v5p0_hdmiout: v5p0-hdmiout-regulator { + compatible = "regulator-fixed"; + regulator-name = "V5P0_HDMIOUT"; + + vin-supply = <&vdc_5v>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + + // TODO: make it possible to drive same GPIO from two clients + // gpio = <&tlmm 89 GPIO_ACTIVE_HIGH>; + // enable-active-high; + }; + + vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vbat_som: vbat-som-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT_SOM"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <4200000>; + regulator-max-microvolt = <4200000>; + regulator-always-on; + }; + + vdc_3v3: vdc-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_3V3"; + vin-supply = <&dc12v>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdc_5v: vdc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "VDC_5V"; + + vin-supply = <&dc12v>; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <500000>; + regulator-always-on; + }; + + vreg_s4a_1p8: vreg-s4a-1p8 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + + vin-supply = <&vbat_som>; + }; +}; + +&adsp_pas { + status = "okay"; + + firmware-name = "qcom/db845c/adsp.mdt"; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13a_2p95: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l21a_2p95: ldo21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2968000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-allow-bypass; + }; + }; +}; + +&cdsp_pas { + status = "okay"; + firmware-name = "qcom/db845c/cdsp.mdt"; +}; + +&gcc { + protected-clocks = <GCC_QSPI_CORE_CLK>, + <GCC_QSPI_CORE_CLK_SRC>, + <GCC_QSPI_CNOC_PERIPH_AHB_CLK>; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + bus-width = <4>; + cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>; +}; + +&tlmm { + pcie0_pwren_state: pcie0-pwren { + pins = "gpio90"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdc2_default_state: sdc2-default { + clk { + pins = "sdc2_clk"; + bias-disable; + + /* + * It seems that mmc_test reports errors if drive + * strength is not 16 on clk, cmd, and data pins. + */ + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc2_card_det_n: sd-card-det-n { + pins = "gpio126"; + function = "gpio"; + bias-pull-up; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&uart9 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>; + qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>; + qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>; +}; + +&usb_2_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l26a_1p2>; + vdda-pll-supply = <&vreg_l1a_0p875>; +}; + +&ufs_mem_hc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <800000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l26a_1p2>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; + +/* PINCTRL - additions to nodes defined in sdm845.dtsi */ + +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-disable; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; +}; diff --git a/dts/src/arm64/qcom/sdm845-mtp.dts b/dts/src/arm64/qcom/sdm845-mtp.dts index 02b8357c8c..2e78638eb7 100644 --- a/dts/src/arm64/qcom/sdm845-mtp.dts +++ b/dts/src/arm64/qcom/sdm845-mtp.dts @@ -404,8 +404,8 @@ }; &usb_1_dwc3 { - /* Until we have Type C hooked up we'll force this as host. */ - dr_mode = "host"; + /* Until we have Type C hooked up we'll force this as peripheral. */ + dr_mode = "peripheral"; }; &usb_1_hsphy { diff --git a/dts/src/arm64/qcom/sdm845.dtsi b/dts/src/arm64/qcom/sdm845.dtsi index fcb93300ca..4babff5f19 100644 --- a/dts/src/arm64/qcom/sdm845.dtsi +++ b/dts/src/arm64/qcom/sdm845.dtsi @@ -190,6 +190,9 @@ compatible = "qcom,kryo385"; reg = <0x0 0x0>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; @@ -208,6 +211,9 @@ compatible = "qcom,kryo385"; reg = <0x0 0x100>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; @@ -223,6 +229,9 @@ compatible = "qcom,kryo385"; reg = <0x0 0x200>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; @@ -238,6 +247,9 @@ compatible = "qcom,kryo385"; reg = <0x0 0x300>; enable-method = "psci"; + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 + &LITTLE_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; capacity-dmips-mhz = <607>; qcom,freq-domain = <&cpufreq_hw 0>; #cooling-cells = <2>; @@ -254,6 +266,9 @@ reg = <0x0 0x400>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_400>; @@ -269,6 +284,9 @@ reg = <0x0 0x500>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_500>; @@ -284,6 +302,9 @@ reg = <0x0 0x600>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_600>; @@ -299,6 +320,9 @@ reg = <0x0 0x700>; enable-method = "psci"; capacity-dmips-mhz = <1024>; + cpu-idle-states = <&BIG_CPU_SLEEP_0 + &BIG_CPU_SLEEP_1 + &CLUSTER_SLEEP_0>; qcom,freq-domain = <&cpufreq_hw 1>; #cooling-cells = <2>; next-level-cache = <&L2_700>; @@ -325,26 +349,78 @@ core3 { cpu = <&CPU3>; }; - }; - cluster1 { - core0 { + core4 { cpu = <&CPU4>; }; - core1 { + core5 { cpu = <&CPU5>; }; - core2 { + core6 { cpu = <&CPU6>; }; - core3 { + core7 { cpu = <&CPU7>; }; }; }; + + idle-states { + entry-method = "psci"; + + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { + compatible = "arm,idle-state"; + idle-state-name = "little-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <350>; + exit-latency-us = <461>; + min-residency-us = <1890>; + local-timer-stop; + }; + + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { + compatible = "arm,idle-state"; + idle-state-name = "little-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <360>; + exit-latency-us = <531>; + min-residency-us = <3934>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_0: cpu-sleep-1-0 { + compatible = "arm,idle-state"; + idle-state-name = "big-power-down"; + arm,psci-suspend-param = <0x40000003>; + entry-latency-us = <264>; + exit-latency-us = <621>; + min-residency-us = <952>; + local-timer-stop; + }; + + BIG_CPU_SLEEP_1: cpu-sleep-1-1 { + compatible = "arm,idle-state"; + idle-state-name = "big-rail-power-down"; + arm,psci-suspend-param = <0x40000004>; + entry-latency-us = <702>; + exit-latency-us = <1061>; + min-residency-us = <4488>; + local-timer-stop; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + idle-state-name = "cluster-power-down"; + arm,psci-suspend-param = <0x400000F4>; + entry-latency-us = <3263>; + exit-latency-us = <6562>; + min-residency-us = <9987>; + local-timer-stop; + }; + }; }; pmu { @@ -1671,6 +1747,64 @@ }; }; + mss_pil: remoteproc@4080000 { + compatible = "qcom,sdm845-mss-pil"; + reg = <0 0x04080000 0 0x408>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = + <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack", + "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_MEMNOC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&gcc GCC_MSS_MFAB_AXIS_CLK>, + <&gcc GCC_PRNG_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "bus", "mem", "gpll0_mss", + "snoc_axi", "mnoc_axi", "prng", "xo"; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; + + power-domains = <&aoss_qmp 2>, + <&rpmhpd SDM845_CX>, + <&rpmhpd SDM845_MX>, + <&rpmhpd SDM845_MSS>; + power-domain-names = "load_state", "cx", "mx", "mss"; + + mba { + memory-region = <&mba_region>; + }; + + mpss { + memory-region = <&mpss_region>; + }; + + glink-edge { + interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; + label = "modem"; + qcom,remote-pid = <1>; + mboxes = <&apss_shared 12>; + }; + }; + gpucc: clock-controller@5090000 { compatible = "qcom,sdm845-gpucc"; reg = <0 0x05090000 0 0x9000>; @@ -2106,6 +2240,133 @@ }; }; + gpu@5000000 { + compatible = "qcom,adreno-630.2", "qcom,adreno"; + #stream-id-cells = <16>; + + reg = <0 0x5000000 0 0x40000>, <0 0x509e000 0 0x10>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem"; + + /* + * Look ma, no clocks! The GPU clocks and power are + * controlled entirely by the GMU + */ + + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + + iommus = <&adreno_smmu 0>; + + operating-points-v2 = <&gpu_opp_table>; + + qcom,gmu = <&gmu>; + + zap-shader { + memory-region = <&gpu_mem>; + }; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-710000000 { + opp-hz = /bits/ 64 <710000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>; + }; + + opp-675000000 { + opp-hz = /bits/ 64 <675000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + opp-596000000 { + opp-hz = /bits/ 64 <596000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + opp-520000000 { + opp-hz = /bits/ 64 <520000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + opp-414000000 { + opp-hz = /bits/ 64 <414000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-342000000 { + opp-hz = /bits/ 64 <342000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-257000000 { + opp-hz = /bits/ 64 <257000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + }; + }; + + adreno_smmu: iommu@5040000 { + compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2"; + reg = <0 0x5040000 0 0x10000>; + #iommu-cells = <1>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>; + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_CFG_AHB_CLK>; + clock-names = "bus", "iface"; + + power-domains = <&gpucc GPU_CX_GDSC>; + }; + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu"; + + reg = <0 0x506a000 0 0x30000>, + <0 0xb280000 0 0x10000>, + <0 0xb480000 0 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + + power-domains = <&gpucc GPU_CX_GDSC>, + <&gpucc GPU_GX_GDSC>; + power-domain-names = "cx", "gx"; + + iommus = <&adreno_smmu 5>; + + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + dispcc: clock-controller@af00000 { compatible = "qcom,sdm845-dispcc"; reg = <0 0x0af00000 0 0x10000>; @@ -2142,6 +2403,16 @@ #reset-cells = <1>; }; + aoss_qmp: qmp@c300000 { + compatible = "qcom,sdm845-aoss-qmp"; + reg = <0 0x0c300000 0 0x100000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 0>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0 0x0c440000 0 0x1100>, diff --git a/dts/src/arm64/renesas/hihope-common.dtsi b/dts/src/arm64/renesas/hihope-common.dtsi new file mode 100644 index 0000000000..3311a982ff --- /dev/null +++ b/dts/src/arm64/renesas/hihope-common.dtsi @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2[MN] main board common parts + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "ignore_loglevel"; + stdout-path = "serial0:115200n8"; + }; + + hdmi0-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con: endpoint { + remote-endpoint = <&rcar_dw_hdmi0_out>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>; + }; + + led1 { + gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + }; + + led2 { + gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; + }; + + led3 { + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vbus0_usb2: regulator-vbus0-usb2 { + compatible = "regulator-fixed"; + + regulator-name = "USB20_VBUS0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + x302_clk: x302-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + + x304_clk: x304-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&versaclock5 1>, + <&x302_clk>, + <&versaclock5 2>; + clock-names = "du.0", "du.1", "du.2", + "dclkin.0", "dclkin.1", "dclkin.2"; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&gpio6 { + usb1-reset { + gpio-hog; + gpios = <10 GPIO_ACTIVE_LOW>; + output-low; + line-name = "usb1-reset"; + }; +}; + +&hdmi0 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + }; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + status = "okay"; + + versaclock5: clock-generator@6a { + compatible = "idt,5p49v5923"; + reg = <0x6a>; + #clock-cells = <1>; + clocks = <&x304_clk>; + clock-names = "xin"; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds"; + function = "sdhi3"; + power-source = <1800>; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + mux { + groups = "usb1"; + function = "usb1"; + }; + + ovc { + pins = "GP_6_27"; + bias-pull-up; + }; + }; + + usb30_pins: usb30 { + groups = "usb30"; + function = "usb30"; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-1 = <&sdhi3_pins>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + fixed-emmc-driver-type = <1>; +}; + +&usb_extal_clk { + clock-frequency = <50000000>; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + vbus-supply = <&vbus0_usb2>; + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb3_peri0 { + phys = <&usb3_phy0>; + phy-names = "usb"; + + companion = <&xhci0>; + + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3s0_clk { + clock-frequency = <100000000>; +}; + +&xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/hihope-rzg2-ex.dtsi b/dts/src/arm64/renesas/hihope-rzg2-ex.dtsi new file mode 100644 index 0000000000..07a6eeaed1 --- /dev/null +++ b/dts/src/arm64/renesas/hihope-rzg2-ex.dtsi @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the RZ/G2[MN] HiHope sub board common parts + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/ { + aliases { + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; + }; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-txid"; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + }; +}; + +&pciec0 { + status = "okay"; +}; + +&pciec1 { + status = "okay"; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + avb_pins: avb { + mux { + groups = "avb_link", "avb_mdio", "avb_mii"; + function = "avb"; + }; + + pins_mdio { + groups = "avb_mdio"; + drive-strength = <24>; + }; + + pins_mii_tx { + pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", + "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; + drive-strength = <12>; + }; + }; +}; diff --git a/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-ex.dts b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-ex.dts new file mode 100644 index 0000000000..6e33a3b277 --- /dev/null +++ b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m-ex.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M sub board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +#include "r8a774a1-hihope-rzg2m.dts" +#include "hihope-rzg2-ex.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2M with sub board"; + compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m", + "renesas,r8a774a1"; +}; diff --git a/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m.dts b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m.dts new file mode 100644 index 0000000000..93ca973c85 --- /dev/null +++ b/dts/src/arm64/renesas/r8a774a1-hihope-rzg2m.dts @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for the HiHope RZ/G2M main board + * + * Copyright (C) 2019 Renesas Electronics Corp. + */ + +/dts-v1/; +#include "r8a774a1.dtsi" +#include "hihope-common.dtsi" + +/ { + model = "HopeRun HiHope RZ/G2M main board based on r8a774a1"; + compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; +}; diff --git a/dts/src/arm64/renesas/r8a774a1.dtsi b/dts/src/arm64/renesas/r8a774a1.dtsi index de282c4794..f209457c78 100644 --- a/dts/src/arm64/renesas/r8a774a1.dtsi +++ b/dts/src/arm64/renesas/r8a774a1.dtsi @@ -56,10 +56,78 @@ clock-frequency = <0>; }; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <820000>; + clock-latency-ns = <300000>; + }; + }; + cpus { #address-cells = <1>; #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&a57_0>; + }; + core1 { + cpu = <&a57_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&a53_0>; + }; + core1 { + cpu = <&a53_1>; + }; + core2 { + cpu = <&a53_2>; + }; + core3 { + cpu = <&a53_3>; + }; + }; + }; + a57_0: cpu@0 { compatible = "arm,cortex-a57"; reg = <0x0>; @@ -67,7 +135,11 @@ power-domains = <&sysc R8A774A1_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; a57_1: cpu@1 { @@ -78,6 +150,9 @@ next-level-cache = <&L2_CA57>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z>; + operating-points-v2 = <&cluster0_opp>; + capacity-dmips-mhz = <1024>; + #cooling-cells = <2>; }; a53_0: cpu@100 { @@ -87,7 +162,11 @@ power-domains = <&sysc R8A774A1_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <560>; }; a53_1: cpu@101 { @@ -98,6 +177,8 @@ next-level-cache = <&L2_CA53>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <560>; }; a53_2: cpu@102 { @@ -108,6 +189,8 @@ next-level-cache = <&L2_CA53>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <560>; }; a53_3: cpu@103 { @@ -118,6 +201,8 @@ next-level-cache = <&L2_CA53>; enable-method = "psci"; clocks = <&cpg CPG_CORE R8A774A1_CLK_Z2>; + operating-points-v2 = <&cluster1_opp>; + capacity-dmips-mhz = <560>; }; L2_CA57: cache-controller-0 { @@ -326,6 +411,76 @@ reg = <0 0xe6060000 0 0x50c>; }; + cmt0: timer@e60f0000 { + compatible = "renesas,r8a774a1-cmt0", + "renesas,rcar-gen3-cmt0"; + reg = <0 0xe60f0000 0 0x1004>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 303>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 303>; + status = "disabled"; + }; + + cmt1: timer@e6130000 { + compatible = "renesas,r8a774a1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6130000 0 0x1004>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 302>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 302>; + status = "disabled"; + }; + + cmt2: timer@e6140000 { + compatible = "renesas,r8a774a1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6140000 0 0x1004>; + interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 301>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 301>; + status = "disabled"; + }; + + cmt3: timer@e6148000 { + compatible = "renesas,r8a774a1-cmt1", + "renesas,rcar-gen3-cmt1"; + reg = <0 0xe6148000 0 0x1004>; + interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 300>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 300>; + status = "disabled"; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a774a1-cpg-mssr"; reg = <0 0xe6150000 0 0x0bb0>; @@ -377,6 +532,71 @@ resets = <&cpg 407>; }; + tmu0: timer@e61e0000 { + compatible = "renesas,tmu-r8a774a1", "renesas,tmu"; + reg = <0 0xe61e0000 0 0x30>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 125>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 125>; + status = "disabled"; + }; + + tmu1: timer@e6fc0000 { + compatible = "renesas,tmu-r8a774a1", "renesas,tmu"; + reg = <0 0xe6fc0000 0 0x30>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 124>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 124>; + status = "disabled"; + }; + + tmu2: timer@e6fd0000 { + compatible = "renesas,tmu-r8a774a1", "renesas,tmu"; + reg = <0 0xe6fd0000 0 0x30>; + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 123>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 123>; + status = "disabled"; + }; + + tmu3: timer@e6fe0000 { + compatible = "renesas,tmu-r8a774a1", "renesas,tmu"; + reg = <0 0xe6fe0000 0 0x30>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 122>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 122>; + status = "disabled"; + }; + + tmu4: timer@ffc00000 { + compatible = "renesas,tmu-r8a774a1", "renesas,tmu"; + reg = <0 0xffc00000 0 0x30>; + interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 121>; + clock-names = "fck"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 121>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; @@ -601,15 +821,15 @@ "renesas,rcar-gen3-usbhs"; reg = <0 0xe6590000 0 0x200>; interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 704>; + clocks = <&cpg CPG_MOD 704>, <&cpg CPG_MOD 703>; dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; - resets = <&cpg 704>; + resets = <&cpg 704>, <&cpg 703>; status = "disabled"; }; @@ -686,6 +906,14 @@ resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds0 0>, <&ipmmu_ds0 1>, + <&ipmmu_ds0 2>, <&ipmmu_ds0 3>, + <&ipmmu_ds0 4>, <&ipmmu_ds0 5>, + <&ipmmu_ds0 6>, <&ipmmu_ds0 7>, + <&ipmmu_ds0 8>, <&ipmmu_ds0 9>, + <&ipmmu_ds0 10>, <&ipmmu_ds0 11>, + <&ipmmu_ds0 12>, <&ipmmu_ds0 13>, + <&ipmmu_ds0 14>, <&ipmmu_ds0 15>; }; dmac1: dma-controller@e7300000 { @@ -720,6 +948,14 @@ resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 0>, <&ipmmu_ds1 1>, + <&ipmmu_ds1 2>, <&ipmmu_ds1 3>, + <&ipmmu_ds1 4>, <&ipmmu_ds1 5>, + <&ipmmu_ds1 6>, <&ipmmu_ds1 7>, + <&ipmmu_ds1 8>, <&ipmmu_ds1 9>, + <&ipmmu_ds1 10>, <&ipmmu_ds1 11>, + <&ipmmu_ds1 12>, <&ipmmu_ds1 13>, + <&ipmmu_ds1 14>, <&ipmmu_ds1 15>; }; dmac2: dma-controller@e7310000 { @@ -754,6 +990,14 @@ resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_ds1 16>, <&ipmmu_ds1 17>, + <&ipmmu_ds1 18>, <&ipmmu_ds1 19>, + <&ipmmu_ds1 20>, <&ipmmu_ds1 21>, + <&ipmmu_ds1 22>, <&ipmmu_ds1 23>, + <&ipmmu_ds1 24>, <&ipmmu_ds1 25>, + <&ipmmu_ds1 26>, <&ipmmu_ds1 27>, + <&ipmmu_ds1 28>, <&ipmmu_ds1 29>, + <&ipmmu_ds1 30>, <&ipmmu_ds1 31>; }; ipmmu_ds0: mmu@e6740000 { @@ -869,6 +1113,7 @@ power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 812>; phy-mode = "rgmii"; + iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -1629,6 +1874,14 @@ resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp 0>, <&ipmmu_mp 1>, + <&ipmmu_mp 2>, <&ipmmu_mp 3>, + <&ipmmu_mp 4>, <&ipmmu_mp 5>, + <&ipmmu_mp 6>, <&ipmmu_mp 7>, + <&ipmmu_mp 8>, <&ipmmu_mp 9>, + <&ipmmu_mp 10>, <&ipmmu_mp 11>, + <&ipmmu_mp 12>, <&ipmmu_mp 13>, + <&ipmmu_mp 14>, <&ipmmu_mp 15>; }; audma1: dma-controller@ec720000 { @@ -1663,6 +1916,14 @@ resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <16>; + iommus = <&ipmmu_mp 16>, <&ipmmu_mp 17>, + <&ipmmu_mp 18>, <&ipmmu_mp 19>, + <&ipmmu_mp 20>, <&ipmmu_mp 21>, + <&ipmmu_mp 22>, <&ipmmu_mp 23>, + <&ipmmu_mp 24>, <&ipmmu_mp 25>, + <&ipmmu_mp 26>, <&ipmmu_mp 27>, + <&ipmmu_mp 28>, <&ipmmu_mp 29>, + <&ipmmu_mp 30>, <&ipmmu_mp 31>; }; xhci0: usb@ee000000 { @@ -1691,11 +1952,11 @@ compatible = "generic-ohci"; reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - phys = <&usb2_phy0>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -1704,7 +1965,7 @@ reg = <0 0xee0a0000 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 1>; phy-names = "usb"; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 702>; @@ -1715,12 +1976,12 @@ compatible = "generic-ehci"; reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; - phys = <&usb2_phy0>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; - resets = <&cpg 703>; + resets = <&cpg 703>, <&cpg 704>; status = "disabled"; }; @@ -1729,7 +1990,7 @@ reg = <0 0xee0a0100 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 2>; phy-names = "usb"; companion = <&ohci1>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; @@ -1742,10 +2003,10 @@ "renesas,rcar-gen3-usb2-phy"; reg = <0 0xee080200 0 0x700>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 703>; + clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; - resets = <&cpg 703>; - #phy-cells = <0>; + resets = <&cpg 703>, <&cpg 704>; + #phy-cells = <1>; status = "disabled"; }; @@ -1756,7 +2017,7 @@ clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; resets = <&cpg 702>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -1825,6 +2086,70 @@ resets = <&cpg 408>; }; + pciec0: pcie@fe000000 { + compatible = "renesas,pcie-r8a774a1", + "renesas,pcie-rcar-gen3"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 319>; + status = "disabled"; + }; + + pciec1: pcie@ee800000 { + compatible = "renesas,pcie-r8a774a1", + "renesas,pcie-rcar-gen3"; + reg = <0 0xee800000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000 + 0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000 + 0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000 + 0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 318>; + status = "disabled"; + }; + + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A774A1_PD_A3VC>; + resets = <&cpg 119>; + renesas,fcp = <&fcpf0>; + }; + fcpf0: fcp@fe950000 { compatible = "renesas,fcpf"; reg = <0 0xfe950000 0 0x200>; @@ -1877,6 +2202,61 @@ iommus = <&ipmmu_vc0 19>; }; + vspb: vsp@fe960000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe960000 0 0x8000>; + interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 626>; + power-domains = <&sysc R8A774A1_PD_A3VC>; + resets = <&cpg 626>; + + renesas,fcp = <&fcpvb0>; + }; + + vspd0: vsp@fea20000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea20000 0 0x5000>; + interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 623>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 623>; + + renesas,fcp = <&fcpvd0>; + }; + + vspd1: vsp@fea28000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea28000 0 0x5000>; + interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 622>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 622>; + + renesas,fcp = <&fcpvd1>; + }; + + vspd2: vsp@fea30000 { + compatible = "renesas,vsp2"; + reg = <0 0xfea30000 0 0x5000>; + interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 621>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 621>; + + renesas,fcp = <&fcpvd2>; + }; + + vspi0: vsp@fe9a0000 { + compatible = "renesas,vsp2"; + reg = <0 0xfe9a0000 0 0x8000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 631>; + power-domains = <&sysc R8A774A1_PD_A3VC>; + resets = <&cpg 631>; + + renesas,fcp = <&fcpvi0>; + }; + csi20: csi2@fea80000 { compatible = "renesas,r8a774a1-csi2"; reg = <0 0xfea80000 0 0x10000>; @@ -1988,6 +2368,101 @@ }; }; + hdmi0: hdmi@fead0000 { + compatible = "renesas,r8a774a1-hdmi", + "renesas,rcar-gen3-hdmi"; + reg = <0 0xfead0000 0 0x10000>; + interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 729>, + <&cpg CPG_CORE R8A774A1_CLK_HDMI>; + clock-names = "iahb", "isfr"; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 729>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + dw_hdmi0_in: endpoint { + remote-endpoint = <&du_out_hdmi0>; + }; + }; + port@1 { + reg = <1>; + }; + port@2 { + /* HDMI sound */ + reg = <2>; + }; + }; + }; + + du: display@feb00000 { + compatible = "renesas,du-r8a774a1"; + reg = <0 0xfeb00000 0 0x70000>; + interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>; + clock-names = "du.0", "du.1", "du.2"; + status = "disabled"; + + vsps = <&vspd0 &vspd1 &vspd2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + du_out_rgb: endpoint { + }; + }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { + remote-endpoint = <&dw_hdmi0_in>; + }; + }; + port@2 { + reg = <2>; + du_out_lvds0: endpoint { + remote-endpoint = <&lvds0_in>; + }; + }; + }; + }; + + lvds0: lvds@feb90000 { + compatible = "renesas,r8a774a1-lvds"; + reg = <0 0xfeb90000 0 0x14>; + clocks = <&cpg CPG_MOD 727>; + power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>; + resets = <&cpg 727>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&du_out_lvds0>; + }; + }; + port@1 { + reg = <1>; + lvds0_out: endpoint { + }; + }; + }; + }; + prr: chipid@fff00044 { compatible = "renesas,prr"; reg = <0 0xfff00044 0 4>; @@ -1999,6 +2474,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 0>; + sustainable-power = <3874>; trips { sensor1_crit: sensor1-crit { @@ -2013,6 +2489,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 1>; + sustainable-power = <3874>; trips { sensor2_crit: sensor2-crit { @@ -2021,21 +2498,39 @@ type = "critical"; }; }; - }; sensor_thermal3: sensor-thermal3 { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 2>; + sustainable-power = <3874>; trips { + target: trip-point1 { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + sensor3_crit: sensor3-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 0 2>; + contribution = <1024>; + }; + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; + }; }; }; diff --git a/dts/src/arm64/renesas/r8a774c0-cat874.dts b/dts/src/arm64/renesas/r8a774c0-cat874.dts index 013a48c012..46a77eefa5 100644 --- a/dts/src/arm64/renesas/r8a774c0-cat874.dts +++ b/dts/src/arm64/renesas/r8a774c0-cat874.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "r8a774c0.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/display/tda998x.h> / { model = "Silicon Linux RZ/G2E 96board platform (CAT874)"; @@ -15,13 +16,25 @@ aliases { serial0 = &scif2; + serial1 = &hscif2; }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_out: endpoint { + remote-endpoint = <&tda19988_out>; + }; + }; + }; + leds { compatible = "gpio-leds"; @@ -52,6 +65,23 @@ reg = <0x0 0x48000000 0x0 0x78000000>; }; + sound: sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "CAT874 HDMI sound"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sndcpu>; + simple-audio-card,frame-master = <&sndcpu>; + + sndcpu: simple-audio-card,cpu { + sound-dai = <&rcar_sound>; + }; + + sndcodec: simple-audio-card,codec { + sound-dai = <&tda19988>; + }; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -74,6 +104,46 @@ states = <3300000 1 1800000 0>; }; + + wlan_en_reg: fixedregulator { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + startup-delay-us = <70000>; + + gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + x13_clk: x13 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; +}; + +&audio_clk_a { + clock-frequency = <22579200>; +}; + +&du { + pinctrl-0 = <&du_pins>; + pinctrl-names = "default"; + status = "okay"; + + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&x13_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&tda19988_in>; + }; + }; + }; }; &ehci0 { @@ -85,6 +155,81 @@ clock-frequency = <48000000>; }; +&hscif2 { + pinctrl-0 = <&hscif2_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; + + hd3ss3220@47 { + compatible = "ti,hd3ss3220"; + reg = <0x47>; + interrupt-parent = <&gpio6>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + hd3ss3220_ep: endpoint { + remote-endpoint = <&usb3_role_switch>; + }; + }; + }; + }; + }; + + tda19988: tda19988@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + interrupt-parent = <&gpio1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + video-ports = <0x234501>; + + #sound-dai-cells = <0>; + audio-ports = <TDA998x_I2S 0x03>; + clocks = <&rcar_sound 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + tda19988_in: endpoint { + remote-endpoint = <&du_out_rgb>; + }; + }; + + port@1 { + reg = <1>; + tda19988_out: endpoint { + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; +}; + &i2c1 { pinctrl-0 = <&i2c1_pins>; pinctrl-names = "default"; @@ -98,6 +243,13 @@ }; }; +&lvds0 { + status = "okay"; + + clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>; + clock-names = "fck", "dclkin.0", "extal"; +}; + &ohci0 { dr_mode = "host"; status = "okay"; @@ -113,11 +265,22 @@ }; &pfc { + du_pins: du { + groups = "du_rgb888", "du_clk_out_0", "du_sync", "du_disp", + "du_clk_in_0"; + function = "du"; + }; + i2c1_pins: i2c1 { groups = "i2c1_b"; function = "i2c1"; }; + hscif2_pins: hscif2 { + groups = "hscif2_data_a", "hscif2_ctrl_a"; + function = "hscif2"; + }; + scif2_pins: scif2 { groups = "scif2_data_a"; function = "scif2"; @@ -134,6 +297,47 @@ function = "sdhi0"; power-source = <1800>; }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <1800>; + }; + + sound_pins: sound { + groups = "ssi01239_ctrl", "ssi0_data"; + function = "ssi"; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clkout1_a"; + function = "audio_clk"; + }; + + usb30_pins: usb30 { + groups = "usb30", "usb30_id"; + function = "usb30"; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <11289600>; + + status = "okay"; + + rcar_sound,dai { + dai0 { + playback = <&ssi0 &src0 &dvc0>; + }; + }; }; &rwdt { @@ -162,7 +366,47 @@ status = "okay"; }; +&sdhi3 { + status = "okay"; + pinctrl-0 = <&sdhi3_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + &usb2_phy0 { renesas,no-otg-pins; status = "okay"; }; + +&usb3_peri0 { + companion = <&xhci0>; + status = "okay"; + usb-role-switch; + + port { + usb3_role_switch: endpoint { + remote-endpoint = <&hd3ss3220_ep>; + }; + }; +}; + +&xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/r8a774c0.dtsi b/dts/src/arm64/renesas/r8a774c0.dtsi index 3f86db199d..e7b5bf23f9 100644 --- a/dts/src/arm64/renesas/r8a774c0.dtsi +++ b/dts/src/arm64/renesas/r8a774c0.dtsi @@ -70,7 +70,7 @@ #size-cells = <0>; a53_0: cpu@0 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <0>; device_type = "cpu"; power-domains = <&sysc R8A774C0_PD_CA53_CPU0>; @@ -81,7 +81,7 @@ }; a53_1: cpu@1 { - compatible = "arm,cortex-a53", "arm,armv8"; + compatible = "arm,cortex-a53"; reg = <1>; device_type = "cpu"; power-domains = <&sysc R8A774C0_PD_CA53_CPU1>; @@ -684,7 +684,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -1580,7 +1580,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -1592,7 +1592,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; @@ -1608,7 +1608,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; diff --git a/dts/src/arm64/renesas/r8a7795.dtsi b/dts/src/arm64/renesas/r8a7795.dtsi index 097538cc4b..1745ac4b30 100644 --- a/dts/src/arm64/renesas/r8a7795.dtsi +++ b/dts/src/arm64/renesas/r8a7795.dtsi @@ -155,6 +155,7 @@ power-domains = <&sysc R8A7795_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -207,6 +208,8 @@ power-domains = <&sysc R8A7795_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -812,7 +815,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -829,7 +832,7 @@ <&usb_dmac3 0>, <&usb_dmac3 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy3>; + phys = <&usb2_phy3 3>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 705>, <&cpg 700>; @@ -1450,6 +1453,17 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a7795", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + msiof0: spi@e6e90000 { compatible = "renesas,msiof-r8a7795", "renesas,rcar-gen3-msiof"; @@ -2405,7 +2419,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -2417,7 +2431,7 @@ reg = <0 0xee0a0000 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 1>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 702>; @@ -2429,7 +2443,7 @@ reg = <0 0xee0c0000 0 0x100>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 701>; - phys = <&usb2_phy2>; + phys = <&usb2_phy2 1>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 701>; @@ -2441,7 +2455,7 @@ reg = <0 0xee0e0000 0 0x100>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; - phys = <&usb2_phy3>; + phys = <&usb2_phy3 1>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 700>, <&cpg 705>; @@ -2453,7 +2467,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2466,7 +2480,7 @@ reg = <0 0xee0a0100 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 2>; phy-names = "usb"; companion = <&ohci1>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2479,7 +2493,7 @@ reg = <0 0xee0c0100 0 0x100>; interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 701>; - phys = <&usb2_phy2>; + phys = <&usb2_phy2 2>; phy-names = "usb"; companion = <&ohci2>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2492,7 +2506,7 @@ reg = <0 0xee0e0100 0 0x100>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; - phys = <&usb2_phy3>; + phys = <&usb2_phy3 2>; phy-names = "usb"; companion = <&ohci3>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -2508,7 +2522,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2519,7 +2533,7 @@ clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 702>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2530,7 +2544,7 @@ clocks = <&cpg CPG_MOD 701>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 701>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2542,7 +2556,7 @@ clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 700>, <&cpg 705>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -3168,58 +3182,30 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 0>; + sustainable-power = <6313>; trips { - sensor1_passive: sensor1-passive { - temperature = <95000>; - hysteresis = <1000>; - type = "passive"; - }; sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&sensor1_passive>; - cooling-device = <&a57_0 4 4>, - <&a57_1 4 4>, - <&a57_2 4 4>, - <&a57_3 4 4>; - }; - }; }; sensor_thermal2: sensor-thermal2 { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 1>; + sustainable-power = <6313>; trips { - sensor2_passive: sensor2-passive { - temperature = <95000>; - hysteresis = <1000>; - type = "passive"; - }; sensor2_crit: sensor2-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&sensor2_passive>; - cooling-device = <&a57_0 4 4>, - <&a57_1 4 4>, - <&a57_2 4 4>, - <&a57_3 4 4>; - }; - }; }; sensor_thermal3: sensor-thermal3 { @@ -3228,11 +3214,12 @@ thermal-sensors = <&tsc 2>; trips { - sensor3_passive: sensor3-passive { - temperature = <95000>; + target: trip-point1 { + temperature = <100000>; hysteresis = <1000>; type = "passive"; }; + sensor3_crit: sensor3-crit { temperature = <120000>; hysteresis = <1000>; @@ -3242,11 +3229,15 @@ cooling-maps { map0 { - trip = <&sensor3_passive>; - cooling-device = <&a57_0 4 4>, - <&a57_1 4 4>, - <&a57_2 4 4>, - <&a57_3 4 4>; + trip = <&target>; + cooling-device = <&a57_0 2 4>; + contribution = <1024>; + }; + + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; }; }; }; diff --git a/dts/src/arm64/renesas/r8a7796.dtsi b/dts/src/arm64/renesas/r8a7796.dtsi index d5e2f4af83..26df5b88ef 100644 --- a/dts/src/arm64/renesas/r8a7796.dtsi +++ b/dts/src/arm64/renesas/r8a7796.dtsi @@ -160,6 +160,7 @@ power-domains = <&sysc R8A7796_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z>; operating-points-v2 = <&cluster0_opp>; capacity-dmips-mhz = <1024>; @@ -186,6 +187,8 @@ power-domains = <&sysc R8A7796_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <277>; clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; capacity-dmips-mhz = <535>; @@ -783,7 +786,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -1319,6 +1322,17 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a7796", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + msiof0: spi@e6e90000 { compatible = "renesas,msiof-r8a7796", "renesas,rcar-gen3-msiof"; @@ -2275,7 +2289,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -2287,7 +2301,7 @@ reg = <0 0xee0a0000 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 1>; phy-names = "usb"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 702>; @@ -2299,7 +2313,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -2312,7 +2326,7 @@ reg = <0 0xee0a0100 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 2>; phy-names = "usb"; companion = <&ohci1>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; @@ -2328,7 +2342,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2339,7 +2353,7 @@ clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; resets = <&cpg 702>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2814,76 +2828,61 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 0>; + sustainable-power = <3874>; trips { - sensor1_passive: sensor1-passive { - temperature = <95000>; - hysteresis = <1000>; - type = "passive"; - }; sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&sensor1_passive>; - cooling-device = <&a57_0 5 5>, <&a57_1 5 5>; - }; - }; }; sensor_thermal2: sensor-thermal2 { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 1>; + sustainable-power = <3874>; trips { - sensor2_passive: sensor2-passive { - temperature = <95000>; - hysteresis = <1000>; - type = "passive"; - }; sensor2_crit: sensor2-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&sensor2_passive>; - cooling-device = <&a57_0 5 5>, <&a57_1 5 5>; - }; - }; }; sensor_thermal3: sensor-thermal3 { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 2>; + sustainable-power = <3874>; trips { - sensor3_passive: sensor3-passive { - temperature = <95000>; + target: trip-point1 { + temperature = <100000>; hysteresis = <1000>; type = "passive"; }; + sensor3_crit: sensor3-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; - cooling-maps { map0 { - trip = <&sensor3_passive>; - cooling-device = <&a57_0 5 5>, <&a57_1 5 5>; + trip = <&target>; + cooling-device = <&a57_0 2 4>; + contribution = <1024>; + }; + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; }; }; }; diff --git a/dts/src/arm64/renesas/r8a77965.dtsi b/dts/src/arm64/renesas/r8a77965.dtsi index 2554b1742d..131f895ab7 100644 --- a/dts/src/arm64/renesas/r8a77965.dtsi +++ b/dts/src/arm64/renesas/r8a77965.dtsi @@ -111,6 +111,8 @@ power-domains = <&sysc R8A77965_PD_CA57_CPU0>; next-level-cache = <&L2_CA57>; enable-method = "psci"; + #cooling-cells = <2>; + dynamic-power-coefficient = <854>; clocks = <&cpg CPG_CORE R8A77965_CLK_Z>; operating-points-v2 = <&cluster0_opp>; }; @@ -667,7 +669,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -1195,6 +1197,17 @@ status = "disabled"; }; + tpu: pwm@e6e80000 { + compatible = "renesas,tpu-r8a77965", "renesas,tpu"; + reg = <0 0xe6e80000 0 0x148>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 304>; + power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; + resets = <&cpg 304>; + #pwm-cells = <3>; + status = "disabled"; + }; + msiof0: spi@e6e90000 { compatible = "renesas,msiof-r8a77965", "renesas,rcar-gen3-msiof"; @@ -2015,7 +2028,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -2027,7 +2040,7 @@ reg = <0 0xee0a0000 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 1>; phy-names = "usb"; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 702>; @@ -2039,7 +2052,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -2052,7 +2065,7 @@ reg = <0 0xee0a0100 0 0x100>; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 702>; - phys = <&usb2_phy1>; + phys = <&usb2_phy1 2>; phy-names = "usb"; companion = <&ohci1>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; @@ -2068,7 +2081,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2079,7 +2092,7 @@ clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A77965_PD_ALWAYS_ON>; resets = <&cpg 702>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -2519,6 +2532,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 0>; + sustainable-power = <2439>; trips { sensor1_crit: sensor1-crit { @@ -2533,6 +2547,7 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 1>; + sustainable-power = <2439>; trips { sensor2_crit: sensor2-crit { @@ -2547,14 +2562,30 @@ polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&tsc 2>; + sustainable-power = <2439>; trips { + target: trip-point1 { + /* miliCelsius */ + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + sensor3_crit: sensor3-crit { temperature = <120000>; hysteresis = <1000>; type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 2 4>; + contribution = <1024>; + }; + }; }; }; diff --git a/dts/src/arm64/renesas/r8a77970-eagle.dts b/dts/src/arm64/renesas/r8a77970-eagle.dts index b6d5332157..233f26fbec 100644 --- a/dts/src/arm64/renesas/r8a77970-eagle.dts +++ b/dts/src/arm64/renesas/r8a77970-eagle.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm64/renesas/r8a77990-ebisu.dts b/dts/src/arm64/renesas/r8a77990-ebisu.dts index c727725899..83fc13ac3f 100644 --- a/dts/src/arm64/renesas/r8a77990-ebisu.dts +++ b/dts/src/arm64/renesas/r8a77990-ebisu.dts @@ -19,7 +19,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -262,7 +262,6 @@ &avb { pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; - renesas,no-ether-link; phy-handle = <&phy0>; status = "okay"; diff --git a/dts/src/arm64/renesas/r8a77990.dtsi b/dts/src/arm64/renesas/r8a77990.dtsi index 56cb566ffa..b4318661f3 100644 --- a/dts/src/arm64/renesas/r8a77990.dtsi +++ b/dts/src/arm64/renesas/r8a77990.dtsi @@ -84,9 +84,11 @@ compatible = "arm,cortex-a53"; reg = <0>; device_type = "cpu"; + #cooling-cells = <2>; power-domains = <&sysc R8A77990_PD_CA53_CPU0>; next-level-cache = <&L2_CA53>; enable-method = "psci"; + dynamic-power-coefficient = <277>; clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>; operating-points-v2 = <&cluster1_opp>; }; @@ -630,7 +632,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -1537,7 +1539,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -1549,7 +1551,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; @@ -1565,7 +1567,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A77990_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -1758,7 +1760,7 @@ du: display@feb00000 { compatible = "renesas,du-r8a77990"; - reg = <0 0xfeb00000 0 0x80000>; + reg = <0 0xfeb00000 0 0x40000>; interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 724>, @@ -1801,6 +1803,8 @@ resets = <&cpg 727>; status = "disabled"; + renesas,companion = <&lvds1>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -1856,11 +1860,18 @@ thermal-zones { cpu-thermal { polling-delay-passive = <250>; - polling-delay = <1000>; - thermal-sensors = <&thermal>; + polling-delay = <0>; + thermal-sensors = <&thermal 0>; + sustainable-power = <717>; trips { - cpu-crit { + target: trip-point1 { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + + sensor1_crit: sensor1-crit { temperature = <120000>; hysteresis = <2000>; type = "critical"; @@ -1868,6 +1879,11 @@ }; cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; }; }; }; diff --git a/dts/src/arm64/renesas/r8a77995-draak.dts b/dts/src/arm64/renesas/r8a77995-draak.dts index a7dc11e36f..0711170b26 100644 --- a/dts/src/arm64/renesas/r8a77995-draak.dts +++ b/dts/src/arm64/renesas/r8a77995-draak.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; @@ -511,12 +511,7 @@ status = "okay"; ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - + port { vin4_in: endpoint { remote-endpoint = <&adv7180_out>; }; diff --git a/dts/src/arm64/renesas/r8a77995.dtsi b/dts/src/arm64/renesas/r8a77995.dtsi index 5bf3af246e..0a344eb550 100644 --- a/dts/src/arm64/renesas/r8a77995.dtsi +++ b/dts/src/arm64/renesas/r8a77995.dtsi @@ -354,7 +354,7 @@ <&usb_dmac1 0>, <&usb_dmac1 1>; dma-names = "ch0", "ch1", "ch2", "ch3"; renesas,buswait = <11>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 3>; phy-names = "usb"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 704>, <&cpg 703>; @@ -875,7 +875,7 @@ reg = <0 0xee080000 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 1>; phy-names = "usb"; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; @@ -887,7 +887,7 @@ reg = <0 0xee080100 0 0x100>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; - phys = <&usb2_phy0>; + phys = <&usb2_phy0 2>; phy-names = "usb"; companion = <&ohci0>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; @@ -903,7 +903,7 @@ clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 703>, <&cpg 704>; - #phy-cells = <0>; + #phy-cells = <1>; status = "disabled"; }; @@ -1038,6 +1038,8 @@ resets = <&cpg 727>; status = "disabled"; + renesas,companion = <&lvds1>; + ports { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/renesas/salvator-common.dtsi b/dts/src/arm64/renesas/salvator-common.dtsi index 2dba1328ac..5c2c84723e 100644 --- a/dts/src/arm64/renesas/salvator-common.dtsi +++ b/dts/src/arm64/renesas/salvator-common.dtsi @@ -39,7 +39,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm64/renesas/ulcb-kf.dtsi b/dts/src/arm64/renesas/ulcb-kf.dtsi index 7a09576b31..27851a77f5 100644 --- a/dts/src/arm64/renesas/ulcb-kf.dtsi +++ b/dts/src/arm64/renesas/ulcb-kf.dtsi @@ -38,6 +38,18 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + wlan_en: regulator-wlan_en { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_exp_74 4 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; }; &can0 { @@ -88,6 +100,13 @@ line-name = "Audio_Out_OFF"; }; + sd-wifi-mux { + gpio-hog; + gpios = <5 GPIO_ACTIVE_HIGH>; + output-low; /* Connect WL1837 */ + line-name = "SD WiFi mux"; + }; + hub_pwen { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; @@ -254,6 +273,12 @@ function = "scif1"; }; + sdhi3_pins: sdhi3 { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <3300>; + }; + usb0_pins: usb0 { groups = "usb0"; function = "usb0"; @@ -273,6 +298,30 @@ status = "okay"; }; +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&wlan_en>; + vqmmc-supply = <&wlan_en>; + bus-width = <4>; + no-1-8-v; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + max-frequency = <26000000>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; +}; + &usb2_phy0 { pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm64/renesas/ulcb.dtsi b/dts/src/arm64/renesas/ulcb.dtsi index e70e1bac2b..7e498b46e9 100644 --- a/dts/src/arm64/renesas/ulcb.dtsi +++ b/dts/src/arm64/renesas/ulcb.dtsi @@ -26,7 +26,7 @@ }; chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; stdout-path = "serial0:115200n8"; }; diff --git a/dts/src/arm64/rockchip/rk3328-roc-cc.dts b/dts/src/arm64/rockchip/rk3328-roc-cc.dts index 5d499c9086..bb40c163b0 100644 --- a/dts/src/arm64/rockchip/rk3328-roc-cc.dts +++ b/dts/src/arm64/rockchip/rk3328-roc-cc.dts @@ -141,10 +141,12 @@ phy-mode = "rgmii"; pinctrl-names = "default"; pinctrl-0 = <&rgmiim1_pins>; - snps,force_thresh_dma_mode; + snps,aal; snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; snps,reset-active-low; snps,reset-delays-us = <0 10000 50000>; + snps,rxpbl = <0x4>; + snps,txpbl = <0x4>; tx_delay = <0x24>; rx_delay = <0x18>; status = "okay"; diff --git a/dts/src/arm64/rockchip/rk3328.dtsi b/dts/src/arm64/rockchip/rk3328.dtsi index 994468671b..e9fefd8a7e 100644 --- a/dts/src/arm64/rockchip/rk3328.dtsi +++ b/dts/src/arm64/rockchip/rk3328.dtsi @@ -407,6 +407,7 @@ compatible = "snps,dw-wdt"; reg = <0x0 0xff1a0000 0x0 0x100>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_WDT>; }; pwm0: pwm@ff1b0000 { diff --git a/dts/src/arm64/rockchip/rk3399-ficus.dts b/dts/src/arm64/rockchip/rk3399-ficus.dts index 6b059bd7a0..ebe2ee77ba 100644 --- a/dts/src/arm64/rockchip/rk3399-ficus.dts +++ b/dts/src/arm64/rockchip/rk3399-ficus.dts @@ -146,6 +146,12 @@ }; }; +&spi1 { + /* On both Low speed and High speed expansion */ + cs-gpios = <0>, <&gpio4 RK_PA6 0>, <&gpio4 RK_PA7 0>; + status = "okay"; +}; + &usbdrd_dwc3_0 { dr_mode = "host"; }; diff --git a/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts b/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts new file mode 100644 index 0000000000..0d1f5f9a0d --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-hugsun-x99.dts @@ -0,0 +1,733 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/dts-v1/; +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/input/input.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Hugsun X99 TV BOX"; + compatible = "hugsun,x99", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + dc_5v: dc-5v { + compatible = "regulator-fixed"; + regulator-name = "dc_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + vin-supply = <&dc_5v>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vcc1v8_s0: vcc1v8-s0 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + vin-supply = <&vcc_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_5v>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + pwm-supply = <&vcc_sys>; + regulator-name = "vdd_log"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + status = "okay"; + mali-supply = <&vdd_gpu>; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + i2c-scl-rising-time-ns = <180>; + i2c-scl-falling-time-ns = <30>; + clock-frequency = <400000>; + + vdd_cpu_b: syr827@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + regulator-compatible = "fan53555-reg"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: syr828@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + regulator-compatible = "fan53555-reg"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_sys>; + regulator-initial-mode = <1>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rtc_clko_wifi"; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_hdmi: LDO_REG2 { + regulator-name = "vcca1v8_hdmi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sd: LDO_REG4 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc3v0_sd: LDO_REG5 { + regulator-name = "vcc3v0_sd"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca0v9_hdmi: LDO_REG7 { + regulator-name = "vcca0v9_hdmi"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <40>; + status = "okay"; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + status = "okay"; + }; +}; + +&i2c7 { + status = "okay"; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + audio-supply = <&vcc1v8_s0>; + bt656-supply = <&vcc1v8_s0>; + gpio1830-supply = <&vcc_3v0>; + sdmmc-supply = <&vcc_sd>; +}; + +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_1v8>; +}; + +&pinctrl { + fusb30x { + fusb0_int: fusb0-int { + rockchip,pins = + <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + gmac { + rgmii_sleep_pins: rgmii-sleep-pins { + rockchip,pins = + <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = + <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio { + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_reg_on_h: bt-reg-on-h { + /* external pullup to VCC1V8_PMUPLL */ + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_reg_on_h: wifi-reg_on-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + host_vbus_drv: host-vbus-drv { + rockchip,pins = + <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; + pinctrl-0 = <&pwm2_pin_pull_down>; +}; + +&saradc { + vref-supply = <&vcc1v8_s0>; + status = "okay"; +}; + +&sdmmc { + clock-frequency = <150000000>; + clock-freq-min-max = <200000 150000000>; + supports-sd; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + vqmmc-supply = <&vcc_sd>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + card-detect-delay = <800>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + supports-emmc; + non-removable; + keep-power-in-suspend; + status = "okay"; +}; + +&sdio0 { + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&spdif { + status = "okay"; + pinctrl-0 = <&spdif_bus_1>; + #sound-dai-cells = <0>; +}; + +&spi1 { + status = "okay"; + max-freq = <10000000>; + + flash@0 { + compatible = "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + rockchip,hw-tshut-temp = <110000>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; + + u2phy0_otg: otg-port { + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; + + u2phy1_otg: otg-port { + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + max-speed = <4000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3399-khadas-edge-captain.dts b/dts/src/arm64/rockchip/rk3399-khadas-edge-captain.dts new file mode 100644 index 0000000000..8302e51def --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-khadas-edge-captain.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. + * (https://www.khadas.com) + */ + +/dts-v1/; +#include "rk3399-khadas-edge.dtsi" + +/ { + model = "Khadas Edge-Captain"; + compatible = "khadas,edge-captain", "rockchip,rk3399"; +}; + +&gmac { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3399-khadas-edge-v.dts b/dts/src/arm64/rockchip/rk3399-khadas-edge-v.dts new file mode 100644 index 0000000000..f5dcb99dc3 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-khadas-edge-v.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. + * (https://www.khadas.com) + */ + +/dts-v1/; +#include "rk3399-khadas-edge.dtsi" + +/ { + model = "Khadas Edge-V"; + compatible = "khadas,edge-v", "rockchip,rk3399"; +}; + +&gmac { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pcie0 { + ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3399-khadas-edge.dts b/dts/src/arm64/rockchip/rk3399-khadas-edge.dts new file mode 100644 index 0000000000..31616e7ad8 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-khadas-edge.dts @@ -0,0 +1,13 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. + * (https://www.khadas.com) + */ + +/dts-v1/; +#include "rk3399-khadas-edge.dtsi" + +/ { + model = "Khadas Edge"; + compatible = "khadas,edge", "rockchip,rk3399"; +}; diff --git a/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi b/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi new file mode 100644 index 0000000000..4944d78a0a --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399-khadas-edge.dtsi @@ -0,0 +1,804 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd. + * (https://www.khadas.com) + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_LOW>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_3v3>; + }; + + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vsys_5v0>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vsys_3v3>; + }; + + vsys: vsys { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: vsys-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vsys>; + }; + + vsys_5v0: vsys-5v0 { + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vsys>; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <18000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&sys_led_gpio>, <&user_led_gpio>; + + sys-led { + label = "sys_led"; + linux,default-trigger = "heartbeat"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + }; + + user-led { + label = "user_led"; + default-state = "off"; + gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>; + }; + }; + + fan: pwm-fan { + compatible = "pwm-fan"; + cooling-levels = <0 150 200 255>; + #cooling-cells = <2>; + fan-supply = <&vsys_5v0>; + pwms = <&pwm0 0 40000 0>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_thermal { + trips { + cpu_warm: cpu_warm { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_hot: cpu_hot { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map2 { + trip = <&cpu_warm>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map3 { + trip = <&cpu_hot>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&gpu_thermal { + trips { + gpu_warm: gpu_warm { + temperature = <55000>; + hysteresis = <2000>; + type = "active"; + }; + + gpu_hot: gpu_hot { + temperature = <65000>; + hysteresis = <2000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&gpu_warm>; + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + }; + + map2 { + trip = <&gpu_hot>; + cooling-device = <&fan 2 THERMAL_NO_LIMIT>; + }; + }; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PC6 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vsys_3v3>; + vcc2-supply = <&vsys_3v3>; + vcc3-supply = <&vsys_3v3>; + vcc4-supply = <&vsys_3v3>; + vcc6-supply = <&vsys_3v3>; + vcc7-supply = <&vsys_3v3>; + vcc8-supply = <&vsys_3v3>; + vcc9-supply = <&vsys_3v3>; + vcc10-supply = <&vsys_3v3>; + vcc11-supply = <&vsys_3v3>; + vcc12-supply = <&vsys_3v3>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_apio2: LDO_REG1 { + regulator-name = "vcc1v8_apio2"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_vldo2: LDO_REG2 { + regulator-name = "vcc_vldo2"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_pmupll: LDO_REG3 { + regulator-name = "vcc1v8_pmupll"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: LDO_REG4 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc_vldo5: LDO_REG5 { + regulator-name = "vcc_vldo5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcc1v8_codec: LDO_REG7 { + regulator-name = "vcc1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&cpu_b_sleep>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsys_3v3>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpu_sleep>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vsys_3v3>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c8 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <160>; + i2c-scl-falling-time-ns = <30>; + status = "okay"; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + bt656-supply = <&vcc1v8_apio2>; + audio-supply = <&vcc1v8_codec>; + sdmmc-supply = <&vccio_sd>; + gpio1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_1v8>; + status = "okay"; +}; + +&pinctrl { + bt { + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_reg_on_h: bt-reg-on-h { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + sys_led_gpio: sys_led-gpio { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + user_led_gpio: user_led-gpio { + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + cpu_b_sleep: cpu-b-sleep { + rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + gpu_sleep: gpu-sleep { + rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdio0 { + /* WiFi & BT combo module Ampak AP6356S */ + bus-width = <4>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + vqmmc-supply = <&vcc1v8_s3>; + vmmc-supply = <&vccio_sd>; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + brcm,drive-strength = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + max-speed = <4000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>; + vbat-supply = <&vsys_3v3>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts b/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts index e030627159..1ae1ebd4ef 100644 --- a/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts +++ b/dts/src/arm64/rockchip/rk3399-rock-pi-4.dts @@ -25,6 +25,15 @@ #clock-cells = <0>; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + vcc12v_dcin: dc-12v { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -169,6 +178,10 @@ status = "okay"; }; +&hdmi_sound { + status = "okay"; +}; + &i2c0 { clock-frequency = <400000>; i2c-scl-rising-time-ns = <168>; @@ -451,12 +464,46 @@ }; &pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + pcie { pcie_pwr_en: pcie-pwr-en { rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + sdio0 { + sdio0_bus4: sdio0-bus4 { + rockchip,pins = + <2 20 RK_FUNC_1 &pcfg_pull_up_20ma>, + <2 21 RK_FUNC_1 &pcfg_pull_up_20ma>, + <2 22 RK_FUNC_1 &pcfg_pull_up_20ma>, + <2 23 RK_FUNC_1 &pcfg_pull_up_20ma>; + }; + + sdio0_cmd: sdio0-cmd { + rockchip,pins = + <2 24 RK_FUNC_1 &pcfg_pull_up_20ma>; + }; + + sdio0_clk: sdio0-clk { + rockchip,pins = + <2 25 RK_FUNC_1 &pcfg_pull_none_20ma>; + }; + }; + pmic { pmic_int_l: pmic-int-l { rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; @@ -482,6 +529,17 @@ rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + wifi { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &pwm2 { @@ -494,6 +552,32 @@ vref-supply = <&vcc_1v8>; }; +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; @@ -557,6 +641,23 @@ }; }; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + }; +}; + &uart2 { status = "okay"; }; diff --git a/dts/src/arm64/rockchip/rk3399-rock960.dts b/dts/src/arm64/rockchip/rk3399-rock960.dts index 12285c51cc..437a75f31a 100644 --- a/dts/src/arm64/rockchip/rk3399-rock960.dts +++ b/dts/src/arm64/rockchip/rk3399-rock960.dts @@ -114,6 +114,55 @@ }; }; +&spi0 { + /* On Low speed expansion (LS-SPI0) */ + status = "okay"; +}; + +&spi4 { + /* On High speed expansion (HS-SPI1) */ + status = "okay"; +}; + +&thermal_zones { + cpu_thermal: cpu { + polling-delay-passive = <100>; + polling-delay = <1000>; + thermal-sensors = <&tsadc 0>; + sustainable-power = <1550>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <65000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_alert1: cpu_alert1 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + + trip = <&cpu_alert1>; + cooling-device = + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; +}; + &usbdrd_dwc3_0 { dr_mode = "otg"; }; diff --git a/dts/src/arm64/rockchip/rk3399-rockpro64.dts b/dts/src/arm64/rockchip/rk3399-rockpro64.dts index 20ec7d1c25..eb55940620 100644 --- a/dts/src/arm64/rockchip/rk3399-rockpro64.dts +++ b/dts/src/arm64/rockchip/rk3399-rockpro64.dts @@ -513,6 +513,20 @@ gpio1830-supply = <&vcc_3v0>; }; +&pcie0 { + ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_perst>; + vpcie12v-supply = <&vcc12v_dcin>; + vpcie3v3-supply = <&vcc3v3_pcie>; + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + &pmu_io_domains { pmu1830-supply = <&vcc_3v0>; status = "okay"; @@ -542,6 +556,10 @@ }; pcie { + pcie_perst: pcie-perst { + rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + pcie_pwr_en: pcie-pwr-en { rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; }; diff --git a/dts/src/arm64/rockchip/rk3399-sapphire.dtsi b/dts/src/arm64/rockchip/rk3399-sapphire.dtsi index 04623e52ac..1bc1579674 100644 --- a/dts/src/arm64/rockchip/rk3399-sapphire.dtsi +++ b/dts/src/arm64/rockchip/rk3399-sapphire.dtsi @@ -565,12 +565,11 @@ status = "okay"; u2phy0_otg: otg-port { - phy-supply = <&vcc5v0_typec0>; status = "okay"; }; u2phy0_host: host-port { - phy-supply = <&vcc5v0_host>; + phy-supply = <&vcc5v0_typec0>; status = "okay"; }; }; @@ -620,7 +619,7 @@ &usbdrd_dwc3_0 { status = "okay"; - dr_mode = "otg"; + dr_mode = "host"; }; &usbdrd3_1 { diff --git a/dts/src/arm64/rockchip/rk3399.dtsi b/dts/src/arm64/rockchip/rk3399.dtsi index 196ac9b780..cede1ad81b 100644 --- a/dts/src/arm64/rockchip/rk3399.dtsi +++ b/dts/src/arm64/rockchip/rk3399.dtsi @@ -414,6 +414,9 @@ compatible = "snps,dwc3"; reg = <0x0 0xfe800000 0x0 0x100000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>, + <&cru SCLK_USB3OTG0_SUSPEND>; + clock-names = "ref", "bus_early", "suspend"; dr_mode = "otg"; phys = <&u2phy0_otg>, <&tcphy0_usb3>; phy-names = "usb2-phy", "usb3-phy"; @@ -447,6 +450,9 @@ compatible = "snps,dwc3"; reg = <0x0 0xfe900000 0x0 0x100000>; interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>, + <&cru SCLK_USB3OTG1_SUSPEND>; + clock-names = "ref", "bus_early", "suspend"; dr_mode = "otg"; phys = <&u2phy1_otg>, <&tcphy1_usb3>; phy-names = "usb2-phy", "usb3-phy"; @@ -821,15 +827,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&gpu_alert0>; - cooling-device = - <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; }; @@ -1706,11 +1703,11 @@ reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>; interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "isp0_mmu"; - clocks = <&cru ACLK_ISP0_NOC>, <&cru HCLK_ISP0_NOC>; + clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>; clock-names = "aclk", "iface"; #iommu-cells = <0>; + power-domains = <&power RK3399_PD_ISP0>; rockchip,disable-mmu-reset; - status = "disabled"; }; isp1_mmu: iommu@ff924000 { @@ -1718,11 +1715,11 @@ reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>; interrupt-names = "isp1_mmu"; - clocks = <&cru ACLK_ISP1_NOC>, <&cru HCLK_ISP1_NOC>; + clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>; clock-names = "aclk", "iface"; #iommu-cells = <0>; + power-domains = <&power RK3399_PD_ISP1>; rockchip,disable-mmu-reset; - status = "disabled"; }; hdmi_sound: hdmi-sound { diff --git a/dts/src/arm64/rockchip/rk3399pro.dtsi b/dts/src/arm64/rockchip/rk3399pro.dtsi new file mode 100644 index 0000000000..bb5ebf6608 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3399pro.dtsi @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd. + +#include "rk3399.dtsi" + +/ { + compatible = "rockchip,rk3399pro"; +}; + +/* Default to enabled since AP talk to NPU part over pcie */ +&pcie_phy { + status = "okay"; +}; + +/* Default to enabled since AP talk to NPU part over pcie */ +&pcie0 { + ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + num-lanes = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>; + status = "okay"; +}; diff --git a/dts/src/arm64/socionext/uniphier-ld11-global.dts b/dts/src/arm64/socionext/uniphier-ld11-global.dts index 7968d52435..f72f048a0c 100644 --- a/dts/src/arm64/socionext/uniphier-ld11-global.dts +++ b/dts/src/arm64/socionext/uniphier-ld11-global.dts @@ -163,4 +163,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/dts/src/arm64/socionext/uniphier-ld11.dtsi b/dts/src/arm64/socionext/uniphier-ld11.dtsi index a3cd475b48..8ec40a0b8b 100644 --- a/dts/src/arm64/socionext/uniphier-ld11.dtsi +++ b/dts/src/arm64/socionext/uniphier-ld11.dtsi @@ -8,8 +8,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> -/memreserve/ 0x80000000 0x02000000; - / { compatible = "socionext,uniphier-ld11"; #address-cells = <2>; @@ -110,6 +108,17 @@ <1 10 4>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure-memory@81000000 { + reg = <0x0 0x81000000 0x0 0x01000000>; + no-map; + }; + }; + soc@0 { compatible = "simple-bus"; #address-cells = <1>; @@ -617,6 +626,8 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; diff --git a/dts/src/arm64/socionext/uniphier-ld20.dtsi b/dts/src/arm64/socionext/uniphier-ld20.dtsi index 017f6328c1..b658f2b641 100644 --- a/dts/src/arm64/socionext/uniphier-ld20.dtsi +++ b/dts/src/arm64/socionext/uniphier-ld20.dtsi @@ -9,8 +9,6 @@ #include <dt-bindings/gpio/uniphier-gpio.h> #include <dt-bindings/thermal/thermal.h> -/memreserve/ 0x80000000 0x02000000; - / { compatible = "socionext,uniphier-ld20"; #address-cells = <2>; @@ -215,6 +213,17 @@ }; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure-memory@81000000 { + reg = <0x0 0x81000000 0x0 0x01000000>; + no-map; + }; + }; + soc@0 { compatible = "simple-bus"; #address-cells = <1>; @@ -921,6 +930,8 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; diff --git a/dts/src/arm64/socionext/uniphier-pxs3-ref.dts b/dts/src/arm64/socionext/uniphier-pxs3-ref.dts index 1965e4dfe4..754315bbd1 100644 --- a/dts/src/arm64/socionext/uniphier-pxs3-ref.dts +++ b/dts/src/arm64/socionext/uniphier-pxs3-ref.dts @@ -115,4 +115,8 @@ &nand { status = "okay"; + + nand@0 { + reg = <0>; + }; }; diff --git a/dts/src/arm64/socionext/uniphier-pxs3.dtsi b/dts/src/arm64/socionext/uniphier-pxs3.dtsi index bb97abe1a5..d6f6cee4d5 100644 --- a/dts/src/arm64/socionext/uniphier-pxs3.dtsi +++ b/dts/src/arm64/socionext/uniphier-pxs3.dtsi @@ -8,8 +8,6 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/gpio/uniphier-gpio.h> -/memreserve/ 0x80000000 0x02000000; - / { compatible = "socionext,uniphier-pxs3"; #address-cells = <2>; @@ -138,6 +136,17 @@ <1 10 4>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure-memory@81000000 { + reg = <0x0 0x81000000 0x0 0x01000000>; + no-map; + }; + }; + soc@0 { compatible = "simple-bus"; #address-cells = <1>; @@ -779,6 +788,8 @@ status = "disabled"; reg-names = "nand_data", "denali_reg"; reg = <0x68000000 0x20>, <0x68100000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <0 65 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; diff --git a/dts/src/arm64/sprd/sc9836.dtsi b/dts/src/arm64/sprd/sc9836.dtsi index 286d7173f9..231436be0e 100644 --- a/dts/src/arm64/sprd/sc9836.dtsi +++ b/dts/src/arm64/sprd/sc9836.dtsi @@ -60,7 +60,7 @@ }; funnel@10001000 { - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x10001000 0 0x1000>; clocks = <&clk26mhz>; clock-names = "apb_pclk"; diff --git a/dts/src/arm64/sprd/sc9860.dtsi b/dts/src/arm64/sprd/sc9860.dtsi index b25d199771..e27eb3ed1d 100644 --- a/dts/src/arm64/sprd/sc9860.dtsi +++ b/dts/src/arm64/sprd/sc9860.dtsi @@ -300,7 +300,7 @@ }; funnel@10001000 { /* SoC Funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x10001000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; @@ -367,7 +367,7 @@ }; funnel@11001000 { /* Cluster0 Funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x11001000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; @@ -415,7 +415,7 @@ }; funnel@11002000 { /* Cluster1 Funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x11002000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; @@ -513,7 +513,7 @@ }; funnel@11005000 { /* Main Funnel */ - compatible = "arm,coresight-funnel", "arm,primecell"; + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x11005000 0 0x1000>; clocks = <&ext_26m>; clock-names = "apb_pclk"; diff --git a/dts/src/arm64/sprd/whale2.dtsi b/dts/src/arm64/sprd/whale2.dtsi index 4bb862c6b0..79b9591c37 100644 --- a/dts/src/arm64/sprd/whale2.dtsi +++ b/dts/src/arm64/sprd/whale2.dtsi @@ -130,6 +130,34 @@ clock-names = "enable"; clocks = <&apahb_gate CLK_DMA_EB>; }; + + sdio3: sdio@50430000 { + compatible = "sprd,sdhci-r11"; + reg = <0 0x50430000 0 0x1000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + + clock-names = "sdio", "enable", "2x_enable"; + clocks = <&aon_prediv CLK_EMMC_2X>, + <&apahb_gate CLK_EMMC_EB>, + <&aon_gate CLK_EMMC_2X_EN>; + assigned-clocks = <&aon_prediv CLK_EMMC_2X>; + assigned-clock-parents = <&clk_l0_409m6>; + + sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>; + sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>; + sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>; + sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>; + vmmc-supply = <&vddemmccore>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + cap-mmc-hw-reset; + mmc-hs400-enhanced-strobe; + mmc-hs400-1_8v; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + }; }; aon { @@ -272,4 +300,11 @@ clock-frequency = <100000000>; clock-output-names = "ext-rco-100m"; }; + + clk_l0_409m6: clk_l0_409m6 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <409600000>; + clock-output-names = "ext-409m6"; + }; }; diff --git a/dts/src/arm64/ti/k3-am65-main.dtsi b/dts/src/arm64/ti/k3-am65-main.dtsi index 752455269f..ca70ff73f1 100644 --- a/dts/src/arm64/ti/k3-am65-main.dtsi +++ b/dts/src/arm64/ti/k3-am65-main.dtsi @@ -4,6 +4,7 @@ * * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/ */ +#include <dt-bindings/phy/phy-am654-serdes.h> &cbass_main { msmc_ram: sram@70000000 { @@ -44,6 +45,7 @@ gic_its: gic-its@18200000 { compatible = "arm,gic-v3-its"; reg = <0x00 0x01820000 0x00 0x10000>; + socionext,synquacer-pre-its = <0x1000000 0x400000>; msi-controller; #msi-cells = <1>; }; @@ -60,6 +62,36 @@ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; }; + serdes0: serdes@900000 { + compatible = "ti,phy-am654-serdes"; + reg = <0x0 0x900000 0x0 0x2000>; + reg-names = "serdes"; + #phy-cells = <2>; + power-domains = <&k3_pds 153>; + clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>; + clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk"; + assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>; + ti,serdes-clk = <&serdes0_clk>; + #clock-cells = <1>; + mux-controls = <&serdes_mux 0>; + }; + + serdes1: serdes@910000 { + compatible = "ti,phy-am654-serdes"; + reg = <0x0 0x910000 0x0 0x2000>; + reg-names = "serdes"; + #phy-cells = <2>; + power-domains = <&k3_pds 154>; + clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>; + clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk"; + assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>; + assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>; + ti,serdes-clk = <&serdes1_clk>; + #clock-cells = <1>; + mux-controls = <&serdes_mux 1>; + }; + main_uart0: serial@2800000 { compatible = "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; @@ -232,6 +264,38 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x00100000 0x1c000>; + + pcie0_mode: pcie-mode@4060 { + compatible = "syscon"; + reg = <0x00004060 0x4>; + }; + + pcie1_mode: pcie-mode@4070 { + compatible = "syscon"; + reg = <0x00004070 0x4>; + }; + + pcie_devid: pcie-devid@210 { + compatible = "syscon"; + reg = <0x00000210 0x4>; + }; + + serdes0_clk: serdes_clk@4080 { + compatible = "syscon"; + reg = <0x00004080 0x4>; + }; + + serdes1_clk: serdes_clk@4090 { + compatible = "syscon"; + reg = <0x00004090 0x4>; + }; + + serdes_mux: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */ + <0x4090 0x3>; /* SERDES1 lane select */ + }; }; dwc3_0: dwc3@4000000 { @@ -309,4 +373,141 @@ clock-names = "wkupclk", "refclk"; #phy-cells = <0>; }; + + intr_main_gpio: interrupt-controller0 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <56>; + ti,sci-rm-range-girq = <0x1>; + }; + + cbass_main_navss: interconnect0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + intr_main_navss: interrupt-controller1 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <4>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <56>; + ti,sci-rm-range-girq = <0x0>, <0x2>; + }; + + inta_main_udmass: interrupt-controller@33d00000 { + compatible = "ti,sci-inta"; + reg = <0x0 0x33d00000 0x0 0x100000>; + interrupt-controller; + interrupt-parent = <&intr_main_navss>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <179>; + ti,sci-rm-range-vint = <0x0>; + ti,sci-rm-range-global-event = <0x1>; + }; + }; + + main_gpio0: main_gpio0@600000 { + compatible = "ti,am654-gpio", "ti,keystone-gpio"; + reg = <0x0 0x600000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&intr_main_gpio>; + interrupts = <57 256>, <57 257>, <57 258>, <57 259>, <57 260>, + <57 261>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <96>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k3_clks 57 0>; + clock-names = "gpio"; + }; + + main_gpio1: main_gpio1@601000 { + compatible = "ti,am654-gpio", "ti,keystone-gpio"; + reg = <0x0 0x601000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&intr_main_gpio>; + interrupts = <58 256>, <58 257>, <58 258>, <58 259>, <58 260>, + <58 261>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <90>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k3_clks 58 0>; + clock-names = "gpio"; + }; + + pcie0_rc: pcie@5500000 { + compatible = "ti,am654-pcie-rc"; + reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>; + reg-names = "app", "dbics", "config", "atu"; + power-domains = <&k3_pds 120>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000 + 0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>; + ti,syscon-pcie-id = <&pcie_devid>; + ti,syscon-pcie-mode = <&pcie0_mode>; + bus-range = <0x0 0xff>; + num-viewport = <16>; + max-link-speed = <3>; + dma-coherent; + interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; + msi-map = <0x0 &gic_its 0x0 0x10000>; + }; + + pcie0_ep: pcie-ep@5500000 { + compatible = "ti,am654-pcie-ep"; + reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>; + reg-names = "app", "dbics", "addr_space", "atu"; + power-domains = <&k3_pds 120>; + ti,syscon-pcie-mode = <&pcie0_mode>; + num-ib-windows = <16>; + num-ob-windows = <16>; + max-link-speed = <3>; + dma-coherent; + interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>; + }; + + pcie1_rc: pcie@5600000 { + compatible = "ti,am654-pcie-rc"; + reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>; + reg-names = "app", "dbics", "config", "atu"; + power-domains = <&k3_pds 121>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000 + 0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>; + ti,syscon-pcie-id = <&pcie_devid>; + ti,syscon-pcie-mode = <&pcie1_mode>; + bus-range = <0x0 0xff>; + num-viewport = <16>; + max-link-speed = <3>; + dma-coherent; + interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; + msi-map = <0x0 &gic_its 0x10000 0x10000>; + }; + + pcie1_ep: pcie-ep@5600000 { + compatible = "ti,am654-pcie-ep"; + reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>; + reg-names = "app", "dbics", "addr_space", "atu"; + power-domains = <&k3_pds 121>; + ti,syscon-pcie-mode = <&pcie1_mode>; + num-ib-windows = <16>; + num-ob-windows = <16>; + max-link-speed = <3>; + dma-coherent; + interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; + }; }; diff --git a/dts/src/arm64/ti/k3-am65-mcu.dtsi b/dts/src/arm64/ti/k3-am65-mcu.dtsi index 6f7d2b316d..afc29eaa26 100644 --- a/dts/src/arm64/ti/k3-am65-mcu.dtsi +++ b/dts/src/arm64/ti/k3-am65-mcu.dtsi @@ -17,6 +17,14 @@ power-domains = <&k3_pds 149>; }; + mcu_ram: sram@41c00000 { + compatible = "mmio-sram"; + reg = <0x00 0x41c00000 0x00 0x80000>; + ranges = <0x0 0x00 0x41c00000 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + }; + mcu_i2c0: i2c@40b00000 { compatible = "ti,am654-i2c", "ti,omap4-i2c"; reg = <0x0 0x40b00000 0x0 0x100>; diff --git a/dts/src/arm64/ti/k3-am65-wakeup.dtsi b/dts/src/arm64/ti/k3-am65-wakeup.dtsi index 7cbdc0912a..9cf2c0849a 100644 --- a/dts/src/arm64/ti/k3-am65-wakeup.dtsi +++ b/dts/src/arm64/ti/k3-am65-wakeup.dtsi @@ -7,7 +7,7 @@ &cbass_wakeup { dmsc: dmsc { - compatible = "ti,k2g-sci"; + compatible = "ti,am654-sci"; ti,host-id = <12>; #address-cells = <1>; #size-cells = <1>; @@ -63,4 +63,30 @@ clocks = <&k3_clks 115 1>; power-domains = <&k3_pds 115>; }; + + intr_wkup_gpio: interrupt-controller2 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <56>; + ti,sci-rm-range-girq = <0x4>; + }; + + wkup_gpio0: wkup_gpio0@42110000 { + compatible = "ti,am654-gpio", "ti,keystone-gpio"; + reg = <0x42110000 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&intr_wkup_gpio>; + interrupts = <59 128>, <59 129>, <59 130>, <59 131>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <56>; + ti,davinci-gpio-unbanked = <0>; + clocks = <&k3_clks 59 0>; + clock-names = "gpio"; + }; }; diff --git a/dts/src/arm64/ti/k3-am65.dtsi b/dts/src/arm64/ti/k3-am65.dtsi index 50f4be2047..82edf10b23 100644 --- a/dts/src/arm64/ti/k3-am65.dtsi +++ b/dts/src/arm64/ti/k3-am65.dtsi @@ -68,9 +68,14 @@ <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ + <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* MSMC SRAM */ + <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */ /* MCUSS Range */ <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, @@ -82,6 +87,9 @@ #size-cells = <2>; ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */ + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */ <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */ <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ diff --git a/dts/src/arm64/ti/k3-am654-base-board.dts b/dts/src/arm64/ti/k3-am654-base-board.dts index cf1aa276a1..52c245d36d 100644 --- a/dts/src/arm64/ti/k3-am654-base-board.dts +++ b/dts/src/arm64/ti/k3-am654-base-board.dts @@ -6,6 +6,7 @@ /dts-v1/; #include "k3-am654.dtsi" +#include <dt-bindings/input/input.h> / { compatible = "ti,am654-evm", "ti,am654"; @@ -33,6 +34,25 @@ no-map; }; }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&push_button_pins_default>; + + sw5 { + label = "GPIO Key USER1"; + linux,code = <BTN_0>; + gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>; + }; + + sw6 { + label = "GPIO Key USER2"; + linux,code = <BTN_1>; + gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>; + }; + }; }; &wkup_pmx0 { @@ -42,6 +62,13 @@ AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */ >; }; + + push_button_pins_default: push_button__pins_default { + pinctrl-single,pins = < + AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */ + AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */ + >; + }; }; &main_pmx0 { @@ -228,3 +255,27 @@ ti,adc-channels = <0 1 2 3 4 5 6 7>; }; }; + +&serdes0 { + status = "disabled"; +}; + +&serdes1 { + status = "disabled"; +}; + +&pcie0_rc { + status = "disabled"; +}; + +&pcie0_ep { + status = "disabled"; +}; + +&pcie1_rc { + status = "disabled"; +}; + +&pcie1_ep { + status = "disabled"; +}; diff --git a/dts/src/arm64/ti/k3-j721e-common-proc-board.dts b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts new file mode 100644 index 0000000000..c680123f06 --- /dev/null +++ b/dts/src/arm64/ti/k3-j721e-common-proc-board.dts @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-j721e-som-p0.dtsi" + +/ { + chosen { + stdout-path = "serial2:115200n8"; + bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; + }; +}; + +&wkup_uart0 { + /* Wakeup UART is used by System firmware */ + status = "disabled"; +}; + +&main_uart3 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart5 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart6 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart7 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart8 { + /* UART not brought out */ + status = "disabled"; +}; + +&main_uart9 { + /* UART not brought out */ + status = "disabled"; +}; diff --git a/dts/src/arm64/ti/k3-j721e-main.dtsi b/dts/src/arm64/ti/k3-j721e-main.dtsi new file mode 100644 index 0000000000..a01308142f --- /dev/null +++ b/dts/src/arm64/ti/k3-j721e-main.dtsi @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J721E SoC Family Main Domain peripherals + * + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_main { + msmc_ram: sram@70000000 { + compatible = "mmio-sram"; + reg = <0x0 0x70000000 0x0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x70000000 0x800000>; + + atf-sram@0 { + reg = <0x0 0x20000>; + }; + }; + + gic500: interrupt-controller@1800000 { + compatible = "arm,gic-v3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ + <0x00 0x01900000 0x00 0x100000>; /* GICR */ + + /* vcpumntirq: virtual CPU interface maintenance interrupt */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + gic_its: gic-its@18200000 { + compatible = "arm,gic-v3-its"; + reg = <0x00 0x01820000 0x00 0x10000>; + socionext,synquacer-pre-its = <0x1000000 0x400000>; + msi-controller; + #msi-cells = <1>; + }; + }; + + smmu0: smmu@36600000 { + compatible = "arm,smmu-v3"; + reg = <0x0 0x36600000 0x0 0x100000>; + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eventq", "gerror"; + #iommu-cells = <1>; + }; + + main_gpio_intr: interrupt-controller0 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <14>; + ti,sci-rm-range-girq = <0x1>; + }; + + cbass_main_navss: interconnect0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + main_navss_intr: interrupt-controller1 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <4>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <14>; + ti,sci-rm-range-girq = <0>, <2>; + }; + + main_udmass_inta: interrupt-controller@33d00000 { + compatible = "ti,sci-inta"; + reg = <0x0 0x33d00000 0x0 0x100000>; + interrupt-controller; + interrupt-parent = <&main_navss_intr>; + msi-controller; + ti,sci = <&dmsc>; + ti,sci-dev-id = <209>; + ti,sci-rm-range-vint = <0xa>; + ti,sci-rm-range-global-event = <0xd>; + }; + }; + + secure_proxy_main: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x00 0x32c00000 0x00 0x100000>, + <0x00 0x32400000 0x00 0x100000>, + <0x00 0x32800000 0x00 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + }; + + main_pmx0: pinmux@11c000 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x0 0x11c000 0x0 0x2b4>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + main_uart0: serial@2800000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02800000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 146>; + clocks = <&k3_clks 146 0>; + clock-names = "fclk"; + }; + + main_uart1: serial@2810000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02810000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 278>; + clocks = <&k3_clks 278 0>; + clock-names = "fclk"; + }; + + main_uart2: serial@2820000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02820000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 279>; + clocks = <&k3_clks 279 0>; + clock-names = "fclk"; + }; + + main_uart3: serial@2830000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02830000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 280>; + clocks = <&k3_clks 280 0>; + clock-names = "fclk"; + }; + + main_uart4: serial@2840000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02840000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 281>; + clocks = <&k3_clks 281 0>; + clock-names = "fclk"; + }; + + main_uart5: serial@2850000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02850000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 282>; + clocks = <&k3_clks 282 0>; + clock-names = "fclk"; + }; + + main_uart6: serial@2860000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02860000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 283>; + clocks = <&k3_clks 283 0>; + clock-names = "fclk"; + }; + + main_uart7: serial@2870000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02870000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 284>; + clocks = <&k3_clks 284 0>; + clock-names = "fclk"; + }; + + main_uart8: serial@2880000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02880000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 285>; + clocks = <&k3_clks 285 0>; + clock-names = "fclk"; + }; + + main_uart9: serial@2890000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x02890000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 286>; + clocks = <&k3_clks 286 0>; + clock-names = "fclk"; + }; +}; diff --git a/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi b/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi new file mode 100644 index 0000000000..07b58eeebc --- /dev/null +++ b/dts/src/arm64/ti/k3-j721e-mcu-wakeup.dtsi @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals + * + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +&cbass_mcu_wakeup { + dmsc: dmsc@44083000 { + compatible = "ti,k2g-sci"; + ti,host-id = <12>; + + mbox-names = "rx", "tx"; + + mboxes= <&secure_proxy_main 11>, + <&secure_proxy_main 13>; + + reg-names = "debug_messages"; + reg = <0x00 0x44083000 0x0 0x1000>; + + k3_pds: power-controller { + compatible = "ti,sci-pm-domain"; + #power-domain-cells = <1>; + }; + + k3_clks: clocks { + compatible = "ti,k2g-sci-clk"; + #clock-cells = <2>; + }; + + k3_reset: reset-controller { + compatible = "ti,sci-reset"; + #reset-cells = <2>; + }; + }; + + wkup_pmx0: pinmux@4301c000 { + compatible = "pinctrl-single"; + /* Proxy 0 addressing */ + reg = <0x00 0x4301c000 0x00 0x178>; + #pinctrl-cells = <1>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + }; + + mcu_ram: sram@41c00000 { + compatible = "mmio-sram"; + reg = <0x00 0x41c00000 0x00 0x100000>; + ranges = <0x0 0x00 0x41c00000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + wkup_uart0: serial@42300000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x42300000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <48000000>; + current-speed = <115200>; + power-domains = <&k3_pds 287>; + clocks = <&k3_clks 287 0>; + clock-names = "fclk"; + }; + + mcu_uart0: serial@40a00000 { + compatible = "ti,j721e-uart", "ti,am654-uart"; + reg = <0x00 0x40a00000 0x00 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <96000000>; + current-speed = <115200>; + power-domains = <&k3_pds 149>; + clocks = <&k3_clks 149 0>; + clock-names = "fclk"; + }; + + wkup_gpio_intr: interrupt-controller2 { + compatible = "ti,sci-intr"; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <2>; + ti,sci = <&dmsc>; + ti,sci-dst-id = <14>; + ti,sci-rm-range-girq = <0x5>; + }; +}; diff --git a/dts/src/arm64/ti/k3-j721e-som-p0.dtsi b/dts/src/arm64/ti/k3-j721e-som-p0.dtsi new file mode 100644 index 0000000000..1884fc7014 --- /dev/null +++ b/dts/src/arm64/ti/k3-j721e-som-p0.dtsi @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +/dts-v1/; + +#include "k3-j721e.dtsi" + +/ { + memory@80000000 { + device_type = "memory"; + /* 4G RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + alignment = <0x1000>; + no-map; + }; + }; +}; diff --git a/dts/src/arm64/ti/k3-j721e.dtsi b/dts/src/arm64/ti/k3-j721e.dtsi new file mode 100644 index 0000000000..f8dd74b17b --- /dev/null +++ b/dts/src/arm64/ti/k3-j721e.dtsi @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for J721E SoC Family + * + * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/k3.h> + +/ { + model = "Texas Instruments K3 J721E SoC"; + compatible = "ti,j721e"; + interrupt-parent = <&gic500>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart0; + serial3 = &main_uart1; + serial4 = &main_uart2; + serial5 = &main_uart3; + serial6 = &main_uart4; + serial7 = &main_uart5; + serial8 = &main_uart6; + serial9 = &main_uart7; + serial10 = &main_uart8; + serial11 = &main_uart9; + }; + + chosen { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + cluster0: cluster0 { + core0 { + cpu = <&cpu0>; + }; + + core1 { + cpu = <&cpu1>; + }; + }; + + }; + + cpu0: cpu@0 { + compatible = "arm,cortex-a72"; + reg = <0x000>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a72"; + reg = <0x001>; + device_type = "cpu"; + enable-method = "psci"; + i-cache-size = <0xC000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; + next-level-cache = <&L2_0>; + }; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + cache-level = <2>; + cache-size = <0x100000>; + cache-line-size = <64>; + cache-sets = <2048>; + next-level-cache = <&msmc_l3>; + }; + + msmc_l3: l3-cache0 { + compatible = "cache"; + cache-level = <3>; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + + psci: psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + }; + + a72_timer0: timer-cl0-cpu0 { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */ + }; + + pmu: pmu { + compatible = "arm,armv8-pmuv3"; + /* Recommendation from GIC500 TRM Table A.3 */ + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + cbass_main: interconnect@100000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ + <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ + <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ + <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */ + <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */ + <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */ + <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/ + <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */ + <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */ + <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */ + <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */ + <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */ + <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */ + + /* MCUSS_WKUP Range */ + <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; + + cbass_mcu_wakeup: interconnect@28380000 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/ + <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */ + <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */ + <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */ + <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */ + <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */ + <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */ + <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */ + <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */ + <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */ + <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */ + <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */ + <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/ + }; + }; +}; + +/* Now include the peripherals for each bus segments */ +#include "k3-j721e-main.dtsi" +#include "k3-j721e-mcu-wakeup.dtsi" diff --git a/dts/src/mips/mscc/ocelot.dtsi b/dts/src/mips/mscc/ocelot.dtsi index 90c60d42f5..33ae74aaa1 100644 --- a/dts/src/mips/mscc/ocelot.dtsi +++ b/dts/src/mips/mscc/ocelot.dtsi @@ -132,11 +132,12 @@ <0x1270000 0x100>, <0x1280000 0x100>, <0x1800000 0x80000>, - <0x1880000 0x10000>; + <0x1880000 0x10000>, + <0x1060000 0x10000>; reg-names = "sys", "rew", "qs", "port0", "port1", "port2", "port3", "port4", "port5", "port6", "port7", "port8", "port9", "port10", "qsys", - "ana"; + "ana", "s2"; interrupts = <21 22>; interrupt-names = "xtr", "inj"; diff --git a/dts/src/mips/qca/ar9331.dtsi b/dts/src/mips/qca/ar9331.dtsi index 2bae201aa3..63a9f33aa4 100644 --- a/dts/src/mips/qca/ar9331.dtsi +++ b/dts/src/mips/qca/ar9331.dtsi @@ -116,6 +116,32 @@ }; }; + eth0: ethernet@19000000 { + compatible = "qca,ar9330-eth"; + reg = <0x19000000 0x200>; + interrupts = <4>; + + resets = <&rst 9>, <&rst 22>; + reset-names = "mac", "mdio"; + clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; + clock-names = "eth", "mdio"; + + status = "disabled"; + }; + + eth1: ethernet@1a000000 { + compatible = "qca,ar9330-eth"; + reg = <0x1a000000 0x200>; + interrupts = <5>; + + resets = <&rst 13>, <&rst 23>; + reset-names = "mac", "mdio"; + clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>; + clock-names = "eth", "mdio"; + + status = "disabled"; + }; + usb: usb@1b000100 { compatible = "chipidea,usb2"; reg = <0x1b000000 0x200>; diff --git a/dts/src/mips/qca/ar9331_dpt_module.dts b/dts/src/mips/qca/ar9331_dpt_module.dts index e7af2cf5f4..77bab823eb 100644 --- a/dts/src/mips/qca/ar9331_dpt_module.dts +++ b/dts/src/mips/qca/ar9331_dpt_module.dts @@ -76,3 +76,11 @@ reg = <0>; }; }; + +ð0 { + status = "okay"; +}; + +ð1 { + status = "okay"; +}; diff --git a/dts/src/mips/ralink/mt7628a.dtsi b/dts/src/mips/ralink/mt7628a.dtsi index 9ff7e8faae..61f8621e88 100644 --- a/dts/src/mips/ralink/mt7628a.dtsi +++ b/dts/src/mips/ralink/mt7628a.dtsi @@ -1,3 +1,5 @@ +// SPDX-License-Identifier: GPL-2.0 + / { #address-cells = <1>; #size-cells = <1>; @@ -36,7 +38,113 @@ sysc: system-controller@0 { compatible = "ralink,mt7620a-sysc", "syscon"; - reg = <0x0 0x100>; + reg = <0x0 0x60>; + }; + + pinmux: pinmux@60 { + compatible = "pinctrl-single"; + reg = <0x60 0x8>; + #address-cells = <1>; + #size-cells = <0>; + #pinctrl-cells = <2>; + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1>; + + pinmux_gpio_gpio: pinmux_gpio_gpio { + pinctrl-single,bits = <0x0 0x0 0x3>; + }; + + pinmux_spi_cs1_cs: pinmux_spi_cs1_cs { + pinctrl-single,bits = <0x0 0x0 0x30>; + }; + + pinmux_i2s_gpio: pinmux_i2s_gpio { + pinctrl-single,bits = <0x0 0x40 0xc0>; + }; + + pinmux_uart0_uart: pinmux_uart0_uart0 { + pinctrl-single,bits = <0x0 0x0 0x300>; + }; + + pinmux_sdmode_sdxc: pinmux_sdmode_sdxc { + pinctrl-single,bits = <0x0 0x0 0xc00>; + }; + + pinmux_sdmode_gpio: pinmux_sdmode_gpio { + pinctrl-single,bits = <0x0 0x400 0xc00>; + }; + + pinmux_spi_spi: pinmux_spi_spi { + pinctrl-single,bits = <0x0 0x0 0x1000>; + }; + + pinmux_refclk_gpio: pinmux_refclk_gpio { + pinctrl-single,bits = <0x0 0x40000 0x40000>; + }; + + pinmux_i2c_i2c: pinmux_i2c_i2c { + pinctrl-single,bits = <0x0 0x0 0x300000>; + }; + + pinmux_uart1_uart: pinmux_uart1_uart1 { + pinctrl-single,bits = <0x0 0x0 0x3000000>; + }; + + pinmux_uart2_uart: pinmux_uart2_uart { + pinctrl-single,bits = <0x0 0x0 0xc000000>; + }; + + pinmux_pwm0_pwm: pinmux_pwm0_pwm { + pinctrl-single,bits = <0x0 0x0 0x30000000>; + }; + + pinmux_pwm0_gpio: pinmux_pwm0_gpio { + pinctrl-single,bits = <0x0 0x10000000 + 0x30000000>; + }; + + pinmux_pwm1_pwm: pinmux_pwm1_pwm { + pinctrl-single,bits = <0x0 0x0 0xc0000000>; + }; + + pinmux_pwm1_gpio: pinmux_pwm1_gpio { + pinctrl-single,bits = <0x0 0x40000000 + 0xc0000000>; + }; + + pinmux_p0led_an_gpio: pinmux_p0led_an_gpio { + pinctrl-single,bits = <0x4 0x4 0xc>; + }; + + pinmux_p1led_an_gpio: pinmux_p1led_an_gpio { + pinctrl-single,bits = <0x4 0x10 0x30>; + }; + + pinmux_p2led_an_gpio: pinmux_p2led_an_gpio { + pinctrl-single,bits = <0x4 0x40 0xc0>; + }; + + pinmux_p3led_an_gpio: pinmux_p3led_an_gpio { + pinctrl-single,bits = <0x4 0x100 0x300>; + }; + + pinmux_p4led_an_gpio: pinmux_p4led_an_gpio { + pinctrl-single,bits = <0x4 0x400 0xc00>; + }; + }; + + watchdog: watchdog@100 { + compatible = "mediatek,mt7621-wdt"; + reg = <0x100 0x30>; + + resets = <&resetc 8>; + reset-names = "wdt"; + + interrupt-parent = <&intc>; + interrupts = <24>; + + status = "disabled"; }; intc: interrupt-controller@200 { @@ -62,10 +170,42 @@ reg = <0x300 0x100>; }; + gpio: gpio@600 { + compatible = "mediatek,mt7621-gpio"; + reg = <0x600 0x100>; + + gpio-controller; + interrupt-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + + interrupt-parent = <&intc>; + interrupts = <6>; + }; + + spi: spi@b00 { + compatible = "ralink,mt7621-spi"; + reg = <0xb00 0x100>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_spi_spi>; + + resets = <&resetc 18>; + reset-names = "spi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + uart0: uartlite@c00 { compatible = "ns16550a"; reg = <0xc00 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_uart0_uart>; + resets = <&resetc 12>; reset-names = "uart0"; @@ -79,6 +219,9 @@ compatible = "ns16550a"; reg = <0xd00 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_uart1_uart>; + resets = <&resetc 19>; reset-names = "uart1"; @@ -92,6 +235,9 @@ compatible = "ns16550a"; reg = <0xe00 0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_uart2_uart>; + resets = <&resetc 20>; reset-names = "uart2"; diff --git a/dts/src/xtensa/virt.dts b/dts/src/xtensa/virt.dts new file mode 100644 index 0000000000..6aecbc0f35 --- /dev/null +++ b/dts/src/xtensa/virt.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +/ { + compatible = "cdns,xtensa-iss"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&pic>; + + chosen { + bootargs = "console=ttyS0,115200n8 debug"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x80000000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "cdns,xtensa-cpu"; + reg = <0>; + clocks = <&osc>; + }; + }; + + clocks { + osc: osc { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <40000000>; + }; + }; + + pic: pic { + compatible = "cdns,xtensa-pic"; + /* one cell: internal irq number, + * two cells: second cell == 0: internal irq number + * second cell == 1: external irq number + */ + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + pci { + compatible = "pci-host-ecam-generic"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <0x1>; + + bus-range = <0x0 0x3f>; + reg = <0xc0000000 0x04000000>; + + // BUS_ADDRESS(3) CPU_PHYSICAL(1) SIZE(2) + ranges = <0x01000000 0x0 0xc4000000 0xc4000000 0x0 0x04000000>, + <0x02000000 0x0 0xc8000000 0xc8000000 0x0 0x18000000>; + + // PCI_DEVICE(3) INT#(1) CONTROLLER(PHANDLE) CONTROLLER_DATA(2) + interrupt-map = < + 0x0000 0x0 0x0 0x1 &pic 0x0 0x1 + 0x0800 0x0 0x0 0x1 &pic 0x1 0x1 + 0x1000 0x0 0x0 0x1 &pic 0x2 0x1 + 0x1800 0x0 0x0 0x1 &pic 0x3 0x1 + >; + + interrupt-map-mask = <0x1800 0x0 0x0 0x7>; + }; +}; |