diff options
Diffstat (limited to 'dts/src')
303 files changed, 24498 insertions, 2878 deletions
diff --git a/dts/src/arc/angel4.dts b/dts/src/arc/angel4.dts index 5bb2fdaca0..6b57475967 100644 --- a/dts/src/arc/angel4.dts +++ b/dts/src/arc/angel4.dts @@ -17,7 +17,7 @@ interrupt-parent = <&intc>; chosen { - bootargs = "console=ttyARC0,115200n8 earlyprintk=ttyARC0"; + bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8"; }; aliases { diff --git a/dts/src/arm/aks-cdu.dts b/dts/src/arm/aks-cdu.dts index 54cb5cf860..d9c50fbb49 100644 --- a/dts/src/arm/aks-cdu.dts +++ b/dts/src/arm/aks-cdu.dts @@ -16,6 +16,12 @@ bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs"; }; + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + }; + ahb { apb { usart0: serial@fffb0000 { diff --git a/dts/src/arm/am335x-evmsk.dts b/dts/src/arm/am335x-evmsk.dts index 80a3b215e7..df5fee6b6b 100644 --- a/dts/src/arm/am335x-evmsk.dts +++ b/dts/src/arm/am335x-evmsk.dts @@ -149,12 +149,113 @@ "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT"; }; + + panel { + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcd_pins_default>; + pinctrl-1 = <&lcd_pins_sleep>; + status = "okay"; + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <32>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + display-timings { + 480x272 { + hactive = <480>; + vactive = <272>; + hback-porch = <43>; + hfront-porch = <8>; + hsync-len = <4>; + vback-porch = <12>; + vfront-porch = <4>; + vsync-len = <10>; + clock-frequency = <9000000>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + }; }; &am33xx_pinmux { pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>; + lcd_pins_default: lcd_pins_default { + pinctrl-single,pins = < + 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ + 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ + 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ + 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ + 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ + 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ + 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ + 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ + 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + lcd_pins_sleep: lcd_pins_sleep { + pinctrl-single,pins = < + 0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data23 */ + 0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data22 */ + 0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data21 */ + 0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data20 */ + 0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data19 */ + 0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data18 */ + 0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data17 */ + 0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data16 */ + 0xa0 (PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */ + 0xa4 (PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */ + 0xa8 (PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */ + 0xac (PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */ + 0xb0 (PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */ + 0xb4 (PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */ + 0xb8 (PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */ + 0xbc (PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */ + 0xc0 (PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */ + 0xc4 (PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */ + 0xc8 (PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */ + 0xcc (PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */ + 0xd0 (PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */ + 0xd4 (PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */ + 0xd8 (PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */ + 0xdc (PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */ + 0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.lcd_vsync */ + 0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */ + 0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */ + 0xec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + user_leds_s0: user_leds_s0 { pinctrl-single,pins = < 0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ @@ -573,3 +674,7 @@ ti,wire-config = <0x00 0x11 0x22 0x33>; }; }; + +&lcdc { + status = "okay"; +}; diff --git a/dts/src/arm/am335x-pepper.dts b/dts/src/arm/am335x-pepper.dts new file mode 100644 index 0000000000..0d35ab6464 --- /dev/null +++ b/dts/src/arm/am335x-pepper.dts @@ -0,0 +1,653 @@ +/* + * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "am33xx.dtsi" + +/ { + model = "Gumstix Pepper"; + compatible = "gumstix,am335x-pepper", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc3_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + buttons: user_buttons { + compatible = "gpio-keys"; + }; + + leds: user_leds { + compatible = "gpio-leds"; + }; + + panel: lcd_panel { + compatible = "ti,tilcdc,panel"; + }; + + sound: sound_iface { + compatible = "ti,da830-evm-audio"; + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + }; + + v3v3c_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + }; + + vdd5_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + }; +}; + +/* I2C Busses */ +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + eeprom: eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + }; + + audio_codec: tlv320aic3106@1b { + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + }; + + accel: lis331dlh@1d { + compatible = "st,lis3lv02d"; + reg = <0x1d>; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; +}; + +&am33xx_pinmux { + i2c0_pins: pinmux_i2c0 { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + i2c1_pins: pinmux_i2c1 { + pinctrl-single,pins = < + 0x10C (PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_crs,i2c1_sda */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_rxerr,i2c1_scl */ + >; + }; +}; + +/* Accelerometer */ +&accel { + pinctrl-names = "default"; + pinctrl-0 = <&accel_pins>; + + Vdd-supply = <&ldo3_reg>; + Vdd_IO-supply = <&ldo3_reg>; + st,irq1-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <92>; + st,max-limit-x = <14>; + st,min-limit-y = <14>; + st,max-limit-y = <92>; + st,min-limit-z = <92>; + st,max-limit-z = <14>; +}; + +&am33xx_pinmux { + accel_pins: pinmux_accel { + pinctrl-single,pins = < + 0x98 (PIN_INPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */ + >; + }; +}; + +/* Audio */ +&audio_codec { + status = "okay"; + + gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>; + AVDD-supply = <&ldo3_reg>; + IOVDD-supply = <&ldo3_reg>; + DRVDD-supply = <&ldo3_reg>; + DVDD-supply = <&dcdc1_reg>; +}; + +&sound { + ti,model = "AM335x-EVM"; + ti,audio-codec = <&audio_codec>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In"; +}; + +&mcasp0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&audio_pins>; + + op-mode = <0>; /* MCASP_ISS_MODE */ + tdm-slots = <2>; + serial-dir = < + 1 2 0 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&am33xx_pinmux { + audio_pins: pinmux_audio { + pinctrl-single,pins = < + 0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + 0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + 0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + 0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ + 0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */ + 0x40 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a0.gpio1_16 */ + >; + }; +}; + +/* Display: 24-bit LCD Screen */ +&panel { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <32>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + display-timings { + native-mode = <&timing0>; + timing0: 480x272 { + clock-frequency = <18400000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <4>; + hsync-len = <41>; + vfront-porch = <4>; + vback-porch = <2>; + vsync-len = <10>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; +}; + +&lcdc { + status = "okay"; +}; + +&am33xx_pinmux { + lcd_pins: pinmux_lcd { + pinctrl-single,pins = < + 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data16 */ + 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data17 */ + 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data18 */ + 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data19 */ + 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data20 */ + 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data21 */ + 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data22 */ + 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data23 */ + 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + /* Display Enable */ + 0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + >; + }; +}; + +/* Ethernet */ +&cpsw_emac0 { + status = "okay"; + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii"; +}; + +&cpsw_emac1 { + status = "okay"; + phy_id = <&davinci_mdio>, <1>; + phy-mode = "rgmii"; +}; + +&davinci_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; +}; + +&mac { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <ðernet_pins>; +}; + + +&am33xx_pinmux { + ethernet_pins: pinmux_ethernet { + pinctrl-single,pins = < + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ + /* ethernet interrupt */ + 0x144 (PIN_INPUT_PULLUP | MUX_MODE7) /* rmii2_refclk.gpio0_29 */ + /* ethernet PHY nReset */ + 0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* mii1_col.gpio3_0 */ + >; + }; + + mdio_pins: pinmux_mdio { + pinctrl-single,pins = < + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; +}; + +/* MMC */ +&mmc1 { + /* Bootable SD card slot */ + status = "okay"; + vmmc-supply = <&ldo3_reg>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; +}; + +&mmc2 { + /* eMMC (not populated) on MMC #2 */ + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + vmmc-supply = <&ldo3_reg>; + bus-width = <8>; + ti,non-removable; +}; + +&edma { + /* Map eDMA MMC2 Events from Crossbar */ + ti,edma-xbar-event-map = /bits/ 16 <1 12 + 2 13>; +}; + + +&mmc3 { + /* Wifi & Bluetooth on MMC #3 */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wireless_pins>; + vmmmc-supply = <&v3v3c_reg>; + bus-width = <4>; + ti,non-removable; + dmas = <&edma 12 + &edma 13>; + dma-names = "tx", "rx"; +}; + + +&am33xx_pinmux { + sd_pins: pinmux_sd_card { + pinctrl-single,pins = < + 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + emmc_pins: pinmux_emmc { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + /* EMMC nReset */ + 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ + >; + }; + wireless_pins: pinmux_wireless { + pinctrl-single,pins = < + 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ + 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ + 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ + 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */ + 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc1_clk */ + /* WLAN nReset */ + 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + /* WLAN nPower down */ + 0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ + /* 32kHz Clock */ + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; +}; + +/* Power */ +&vbat { + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +}; + +&v3v3c_reg { + regulator-name = "v3v3c_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vbat>; +}; + +&vdd5_reg { + regulator-name = "vdd5_reg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vbat>; +}; + +/include/ "tps65217.dtsi" + +&tps { + backlight { + isel = <1>; /* ISET1 */ + fdim = <200>; /* TPS65217_BL_FDIM_200HZ */ + default-brightness = <80>; + }; + + regulators { + dcdc1_reg: regulator@0 { + /* VDD_1V8 system supply */ + }; + + dcdc2_reg: regulator@1 { + /* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + }; + + ldo1_reg: regulator@3 { + /* VRTC 1.8V always-on supply */ + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + /* 3.3V rail */ + }; + + ldo3_reg: regulator@5 { + /* VDD_3V3A 3.3V rail */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo4_reg: regulator@6 { + /* VDD_3V3B 3.3V rail */ + }; + }; +}; + +/* SPI Busses */ +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; +}; + +&am33xx_pinmux { + spi0_pins: pinmux_spi0 { + pinctrl-single,pins = < + 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ + 0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ + 0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + >; + }; +}; + +/* Touch Screen */ +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; +}; + +/* UARTs */ +&uart0 { + /* Serial Console */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +&uart1 { + /* Broken out to J6 header */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&am33xx_pinmux { + uart0_pins: pinmux_uart0 { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + uart1_pins: pinmux_uart1 { + pinctrl-single,pins = < + 0x178 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ + 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + >; + }; +}; + +/* USB */ +&usb { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins>; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&am33xx_pinmux { + usb_pins: pinmux_usb { + pinctrl-single,pins = < + /* USB0 Over-Current (active low) */ + 0x64 (PIN_INPUT | MUX_MODE7) /* gpmc_a9.gpio1_25 */ + /* USB1 Over-Current (active low) */ + 0x68 (PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */ + >; + }; +}; + +/* User IO */ +&leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_pins>; + + led@0 { + label = "pepper:user0:blue"; + gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + led@1 { + label = "pepper:user1:red"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + }; +}; + +&buttons { + pinctrl-names = "default"; + pinctrl-0 = <&user_buttons_pins>; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + label = "home"; + linux,code = <KEY_HOME>; + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + + button@1 { + label = "menu"; + linux,code = <KEY_MENU>; + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + + buttons@2 { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; +}; + +&am33xx_pinmux { + user_leds_pins: pinmux_user_leds { + pinctrl-single,pins = < + 0x50 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a4.gpio1_20 */ + 0x54 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + >; + }; + + user_buttons_pins: pinmux_user_buttons { + pinctrl-single,pins = < + 0x58 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + 0x5C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a7.gpio1_21 */ + 0x164 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio0_7 */ + >; + }; +}; diff --git a/dts/src/arm/am33xx.dtsi b/dts/src/arm/am33xx.dtsi index 4a4e02d0ce..3a0a161342 100644 --- a/dts/src/arm/am33xx.dtsi +++ b/dts/src/arm/am33xx.dtsi @@ -347,6 +347,15 @@ status = "disabled"; }; + mailbox: mailbox@480C8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480C8000 0x200>; + interrupts = <77>; + ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + }; + timer1: timer@44e31000 { compatible = "ti,am335x-timer-1ms"; reg = <0x44e31000 0x400>; diff --git a/dts/src/arm/am4372.dtsi b/dts/src/arm/am4372.dtsi index 49fa596222..9b3d2ba82f 100644 --- a/dts/src/arm/am4372.dtsi +++ b/dts/src/arm/am4372.dtsi @@ -30,7 +30,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0>; @@ -168,9 +168,6 @@ ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; - ti,mbox-names = "wkup_m3"; - ti,mbox-data = <0 0 0 0>; - status = "disabled"; }; timer1: timer@44e31000 { @@ -270,7 +267,7 @@ ti,hwmods = "counter_32k"; }; - rtc@44e3e000 { + rtc: rtc@44e3e000 { compatible = "ti,am4372-rtc","ti,da830-rtc"; reg = <0x44e3e000 0x1000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH @@ -279,7 +276,7 @@ status = "disabled"; }; - wdt@44e35000 { + wdt: wdt@44e35000 { compatible = "ti,am4372-wdt","ti,omap3-wdt"; reg = <0x44e35000 0x1000>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; @@ -871,7 +868,7 @@ #size-cells = <1>; ranges; - dispc@4832a400 { + dispc: dispc@4832a400 { compatible = "ti,omap3-dispc"; reg = <0x4832a400 0x400>; interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; diff --git a/dts/src/arm/am437x-gp-evm.dts b/dts/src/arm/am437x-gp-evm.dts index 003766c47b..646a6eade7 100644 --- a/dts/src/arm/am437x-gp-evm.dts +++ b/dts/src/arm/am437x-gp-evm.dts @@ -257,16 +257,73 @@ }; &i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + + tps65218: tps65218@24 { + reg = <0x24>; + compatible = "ti,tps65218"; + interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */ + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + + dcdc1: regulator-dcdc1 { + compatible = "ti,tps65218-dcdc1"; + regulator-name = "vdd_core"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2: regulator-dcdc2 { + compatible = "ti,tps65218-dcdc2"; + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3: regulator-dcdc3 { + compatible = "ti,tps65218-dcdc3"; + regulator-name = "vdcdc3"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + dcdc5: regulator-dcdc5 { + compatible = "ti,tps65218-dcdc5"; + regulator-name = "v1_0bat"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + dcdc6: regulator-dcdc6 { + compatible = "ti,tps65218-dcdc6"; + regulator-name = "v1_8bat"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo1: regulator-ldo1 { + compatible = "ti,tps65218-ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; }; &i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; pixcir_ts@5c { compatible = "pixcir,pixcir_tangoc"; pinctrl-names = "default"; @@ -277,8 +334,8 @@ attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - x-size = <1024>; - y-size = <600>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; }; }; diff --git a/dts/src/arm/am437x-sk-evm.dts b/dts/src/arm/am437x-sk-evm.dts new file mode 100644 index 0000000000..859ff3d620 --- /dev/null +++ b/dts/src/arm/am437x-sk-evm.dts @@ -0,0 +1,613 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* AM437x SK EVM */ + +/dts-v1/; + +#include "am4372.dtsi" +#include <dt-bindings/pinctrl/am43xx.h> +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "TI AM437x SK EVM"; + compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43"; + + aliases { + display0 = &lcd0; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "AM437x-SK-EVM"; + ti,audio-codec = <&tlv320aic3106>; + ti,mcasp-controller = <&mcasp1>; + ti,codec-clock-rate = <24000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT"; + }; + + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + + pinctrl-names = "default"; + pinctrl-0 = <&matrix_keypad_pins>; + + debounce-delay-ms = <5>; + col-scan-delay-us = <1500>; + + row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */ + &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */ + + col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH /* Bank5, pin13 */ + &gpio5 4 GPIO_ACTIVE_HIGH>; /* Bank5, pin4 */ + + linux,keymap = < + MATRIX_KEY(0, 0, KEY_DOWN) + MATRIX_KEY(0, 1, KEY_RIGHT) + MATRIX_KEY(1, 0, KEY_LEFT) + MATRIX_KEY(1, 1, KEY_UP) + >; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + + led@0 { + label = "am437x-sk:red:heartbeat"; + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@1 { + label = "am437x-sk:green:mmc1"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */ + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@2 { + label = "am437x-sk:blue:cpu0"; + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */ + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led@3 { + label = "am437x-sk:blue:usr3"; + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */ + default-state = "off"; + }; + }; + + lcd0: display { + compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <43>; + hsync-len = <4>; + vback-porch = <12>; + vfront-porch = <4>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; +}; + +&am43xx_pinmux { + matrix_keypad_pins: matrix_keypad_pins { + pinctrl-single,pins = < + 0x24c (PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */ + 0x250 (PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */ + 0x254 (PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */ + 0x258 (PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */ + >; + }; + + leds_pins: leds_pins { + pinctrl-single,pins = < + 0x228 (PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */ + 0x22c (PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */ + 0x230 (PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */ + 0x234 (PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */ + >; + }; + + i2c0_pins: i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c1_pins: i2c1_pins { + pinctrl-single,pins = < + 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + ecap0_pins: backlight_pins { + pinctrl-single,pins = < + 0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */ + >; + }; + + edt_ft5306_ts_pins: edt_ft5306_ts_pins { + pinctrl-single,pins = < + 0x74 (PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ + 0x78 (PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */ + + /* Slave 2 */ + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + + /* Slave 2 reset value */ + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + dss_pins: dss_pins { + pinctrl-single,pins = < + 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */ + 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */ + 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ + 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ + 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ + 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ + 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ + 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + + >; + }; + + qspi_pins: qspi_pins { + pinctrl-single,pins = < + 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */ + 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ + 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */ + 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */ + 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */ + 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */ + >; + }; + + mcasp1_pins: mcasp1_pins { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + >; + }; + + lcd_pins: lcd_pins { + pinctrl-single,pins = < + /* GPIO 5_8 to select LCD / HDMI */ + 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + + tps@24 { + compatible = "ti,tps65218"; + reg = <0x24>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + dcdc1: regulator-dcdc1 { + compatible = "ti,tps65218-dcdc1"; + /* VDD_CORE limits min of OPP50 and max of OPP100 */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2: regulator-dcdc2 { + compatible = "ti,tps65218-dcdc2"; + /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3: regulator-dcdc3 { + compatible = "ti,tps65218-dcdc3"; + regulator-name = "vdds_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc4: regulator-dcdc4 { + compatible = "ti,tps65218-dcdc4"; + regulator-name = "v3_3d"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: regulator-ldo1 { + compatible = "ti,tps65218-ldo1"; + regulator-name = "v1_8d"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + }; + + at24@50 { + compatible = "at24,24c256"; + pagesize = <64>; + reg = <0x50>; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + edt-ft5306@38 { + status = "okay"; + compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5306_ts_pins>; + + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <31 0>; + + wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + + touchscreen-size-x = <480>; + touchscreen-size-y = <272>; + }; + + tlv320aic3106: tlv320aic3106@1b { + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + status = "okay"; + + /* Regulators */ + AVDD-supply = <&dcdc4>; + IOVDD-supply = <&dcdc4>; + DRVDD-supply = <&dcdc4>; + DVDD-supply = <&ldo1>; + }; + + lis331dlh@18 { + compatible = "st,lis331dlh"; + reg = <0x18>; + status = "okay"; + + Vdd-supply = <&dcdc4>; + Vdd_IO-supply = <&dcdc4>; + interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap0_pins>; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio5 { + status = "okay"; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + + vmmc-supply = <&dcdc4>; + bus-width = <4>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; +}; + +&usb2_phy1 { + status = "okay"; +}; + +&usb1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb2_phy2 { + status = "okay"; +}; + +&usb2 { + dr_mode = "host"; + status = "okay"; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_pins>; + + spi-max-frequency = <48000000>; + m25p80@0 { + compatible = "mx66l51235l"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpol; + spi-cpha; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first 512KiB + * for a valid file to boot(XIP). + */ + partition@0 { + label = "QSPI.U_BOOT"; + reg = <0x00000000 0x000080000>; + }; + partition@1 { + label = "QSPI.U_BOOT.backup"; + reg = <0x00080000 0x00080000>; + }; + partition@2 { + label = "QSPI.U-BOOT-SPL_OS"; + reg = <0x00100000 0x00010000>; + }; + partition@3 { + label = "QSPI.U_BOOT_ENV"; + reg = <0x00110000 0x00010000>; + }; + partition@4 { + label = "QSPI.U-BOOT-ENV.backup"; + reg = <0x00120000 0x00010000>; + }; + partition@5 { + label = "QSPI.KERNEL"; + reg = <0x00130000 0x0800000>; + }; + partition@6 { + label = "QSPI.FILESYSTEM"; + reg = <0x00930000 0x36D0000>; + }; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <4>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <5>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <2>; +}; + +&elm { + status = "okay"; +}; + +&mcasp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp1_pins>; + + status = "okay"; + + op-mode = <0>; + tdm-slots = <2>; + serial-dir = < + 0 0 1 2 + >; + + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&dss { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_pins>; + + port { + dpi_out: endpoint@0 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/dts/src/arm/am43x-epos-evm.dts b/dts/src/arm/am43x-epos-evm.dts index 90098f98a5..ed7dd23959 100644 --- a/dts/src/arm/am43x-epos-evm.dts +++ b/dts/src/arm/am43x-epos-evm.dts @@ -327,6 +327,65 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + + tps65218: tps65218@24 { + reg = <0x24>; + compatible = "ti,tps65218"; + interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */ + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + + dcdc1: regulator-dcdc1 { + compatible = "ti,tps65218-dcdc1"; + regulator-name = "vdd_core"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2: regulator-dcdc2 { + compatible = "ti,tps65218-dcdc2"; + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3: regulator-dcdc3 { + compatible = "ti,tps65218-dcdc3"; + regulator-name = "vdcdc3"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc5: regulator-dcdc5 { + compatible = "ti,tps65218-dcdc5"; + regulator-name = "v1_0bat"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + dcdc6: regulator-dcdc6 { + compatible = "ti,tps65218-dcdc6"; + regulator-name = "v1_8bat"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo1: regulator-ldo1 { + compatible = "ti,tps65218-ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; at24@50 { compatible = "at24,24c256"; @@ -344,8 +403,8 @@ attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; - x-size = <1024>; - y-size = <600>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; }; }; diff --git a/dts/src/arm/animeo_ip.dts b/dts/src/arm/animeo_ip.dts index 3c4f6d983c..4e0ad3b827 100644 --- a/dts/src/arm/animeo_ip.dts +++ b/dts/src/arm/animeo_ip.dts @@ -40,6 +40,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <18432000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; }; ahb { diff --git a/dts/src/arm/armada-375-db.dts b/dts/src/arm/armada-375-db.dts index 1e2919d43d..929ae00b40 100644 --- a/dts/src/arm/armada-375-db.dts +++ b/dts/src/arm/armada-375-db.dts @@ -123,6 +123,32 @@ cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy3: ethernet-phy@3 { + reg = <3>; + }; + }; + + ethernet@f0000 { + status = "okay"; + + eth0@c4000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + eth1@c5000 { + status = "okay"; + phy = <&phy3>; + phy-mode = "gmii"; + }; + }; }; pcie-controller { diff --git a/dts/src/arm/armada-375.dtsi b/dts/src/arm/armada-375.dtsi index fb92551a1e..c1e49e7bf0 100644 --- a/dts/src/arm/armada-375.dtsi +++ b/dts/src/arm/armada-375.dtsi @@ -25,6 +25,8 @@ gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; + ethernet0 = ð0; + ethernet1 = ð1; }; clocks { @@ -151,6 +153,38 @@ <0xc100 0x100>; }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0xc0054 0x4>; + clocks = <&gateclk 19>; + }; + + /* Network controller */ + ethernet@f0000 { + compatible = "marvell,armada-375-pp2"; + reg = <0xf0000 0xa000>, /* Packet Processor regs */ + <0xc0000 0x3060>, /* LMS regs */ + <0xc4000 0x100>, /* eth0 regs */ + <0xc5000 0x100>; /* eth1 regs */ + clocks = <&gateclk 3>, <&gateclk 19>; + clock-names = "pp_clk", "gop_clk"; + status = "disabled"; + + eth0: eth0@c4000 { + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + port-id = <0>; + status = "disabled"; + }; + + eth1: eth1@c5000 { + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + port-id = <1>; + status = "disabled"; + }; + }; + spi0: spi@10600 { compatible = "marvell,orion-spi"; reg = <0x10600 0x50>; diff --git a/dts/src/arm/armada-38x.dtsi b/dts/src/arm/armada-38x.dtsi index 689fa1a467..242d0ecc99 100644 --- a/dts/src/arm/armada-38x.dtsi +++ b/dts/src/arm/armada-38x.dtsi @@ -286,6 +286,11 @@ reg = <0x20800 0x10>; }; + mpcore-soc-ctrl@20d20 { + compatible = "marvell,armada-380-mpcore-soc-ctrl"; + reg = <0x20d20 0x6c>; + }; + coherency-fabric@21010 { compatible = "marvell,armada-380-coherency-fabric"; reg = <0x21010 0x1c>; diff --git a/dts/src/arm/armada-xp-lenovo-ix4-300d.dts b/dts/src/arm/armada-xp-lenovo-ix4-300d.dts new file mode 100644 index 0000000000..469cf71375 --- /dev/null +++ b/dts/src/arm/armada-xp-lenovo-ix4-300d.dts @@ -0,0 +1,284 @@ +/* + * Device Tree file for Lenovo Iomega ix4-300d + * + * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "armada-xp-mv78230.dtsi" + +/ { + model = "Lenovo Iomega ix4-300d"; + compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230", + "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "/soc/internal-regs/serial@12000"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x20000000>; /* 512MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* Quad port sata: Marvell 88SX7042 */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* USB 3.0 xHCI controller: NEC D720200F1 */ + pcie@5,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + + internal-regs { + pinctrl { + poweroff_pin: poweroff-pin { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + power_button_pin: power-button-pin { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + reset_button_pin: reset-button-pin { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + select_button_pin: select-button-pin { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + scroll_button_pin: scroll-button-pin { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + hdd_led_pin: hdd-led-pin { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1318 */ + reg = <1>; + }; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + usb@50000 { + status = "okay"; + }; + + usb@51000 { + status = "okay"; + }; + + i2c@11000 { + clock-frequency = <400000>; + status = "okay"; + + adt7473@2e { + compatible = "adi,adt7473"; + reg = <0x2e>; + }; + + pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0xe0000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0xe0000 0x20000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env2"; + reg = <0x100000 0x20000>; + read-only; + }; + + partition@120000 { + label = "zImage"; + reg = <0x120000 0x400000>; + }; + + partition@520000 { + label = "initrd"; + reg = <0x520000 0x400000>; + }; + + partition@xE00000 { + label = "boot"; + reg = <0xE00000 0x3F200000>; + }; + + partition@flash { + label = "flash"; + reg = <0x0 0x40000000>; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&power_button_pin &reset_button_pin + &select_button_pin &scroll_button_pin>; + pinctrl-names = "default"; + + power-button { + label = "Power Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; + + reset-button { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + + select-button { + label = "Select Button"; + linux,code = <BTN_SELECT>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + scroll-button { + label = "Scroll Button"; + linux,code = <KEY_SCROLLDOWN>; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + }; + + spi3 { + compatible = "spi-gpio"; + status = "okay"; + gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>; + gpio-mosi = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/ + cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + + gpio_spi: gpio_spi@0 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + registers-number = <2>; + spi-max-frequency = <100000>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&hdd_led_pin>; + pinctrl-names = "default"; + + hdd-led { + label = "ix4-300d:hdd:blue"; + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + power-led { + label = "ix4-300d:power:white"; + gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>; + /* init blinking while booting */ + linux,default-trigger = "timer"; + default-state = "on"; + }; + + sysfail-led { + label = "ix4-300d:sysfail:red"; + gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + sys-led { + label = "ix4-300d:sys:blue"; + gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + hddfail-led { + label = "ix4-300d:hddfail:red"; + gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + }; + + /* + * Warning: you need both eth1 & 0 PHY initialized (i.e having + * them up does the tweak) for poweroff to shutdown otherwise it + * reboots + */ + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&poweroff_pin>; + pinctrl-names = "default"; + gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/dts/src/arm/armada-xp-mv78230.dtsi b/dts/src/arm/armada-xp-mv78230.dtsi index 1257ff1ed2..2592e1c135 100644 --- a/dts/src/arm/armada-xp-mv78230.dtsi +++ b/dts/src/arm/armada-xp-mv78230.dtsi @@ -34,6 +34,7 @@ compatible = "marvell,sheeva-v7"; reg = <0>; clocks = <&cpuclk 0>; + clock-latency = <1000000>; }; cpu@1 { @@ -41,6 +42,7 @@ compatible = "marvell,sheeva-v7"; reg = <1>; clocks = <&cpuclk 1>; + clock-latency = <1000000>; }; }; diff --git a/dts/src/arm/armada-xp-mv78260.dtsi b/dts/src/arm/armada-xp-mv78260.dtsi index 3396b25b39..480e237a87 100644 --- a/dts/src/arm/armada-xp-mv78260.dtsi +++ b/dts/src/arm/armada-xp-mv78260.dtsi @@ -36,6 +36,7 @@ compatible = "marvell,sheeva-v7"; reg = <0>; clocks = <&cpuclk 0>; + clock-latency = <1000000>; }; cpu@1 { @@ -43,6 +44,7 @@ compatible = "marvell,sheeva-v7"; reg = <1>; clocks = <&cpuclk 1>; + clock-latency = <1000000>; }; }; diff --git a/dts/src/arm/armada-xp-mv78460.dtsi b/dts/src/arm/armada-xp-mv78460.dtsi index 6da84bf40a..2c7b1fef47 100644 --- a/dts/src/arm/armada-xp-mv78460.dtsi +++ b/dts/src/arm/armada-xp-mv78460.dtsi @@ -37,6 +37,7 @@ compatible = "marvell,sheeva-v7"; reg = <0>; clocks = <&cpuclk 0>; + clock-latency = <1000000>; }; cpu@1 { @@ -44,6 +45,7 @@ compatible = "marvell,sheeva-v7"; reg = <1>; clocks = <&cpuclk 1>; + clock-latency = <1000000>; }; cpu@2 { @@ -51,6 +53,7 @@ compatible = "marvell,sheeva-v7"; reg = <2>; clocks = <&cpuclk 2>; + clock-latency = <1000000>; }; cpu@3 { @@ -58,6 +61,7 @@ compatible = "marvell,sheeva-v7"; reg = <3>; clocks = <&cpuclk 3>; + clock-latency = <1000000>; }; }; diff --git a/dts/src/arm/armada-xp.dtsi b/dts/src/arm/armada-xp.dtsi index 5902e8359c..bff9f6c18d 100644 --- a/dts/src/arm/armada-xp.dtsi +++ b/dts/src/arm/armada-xp.dtsi @@ -99,7 +99,7 @@ cpuclk: clock-complex@18700 { #clock-cells = <1>; compatible = "marvell,armada-xp-cpu-clock"; - reg = <0x18700 0xA0>; + reg = <0x18700 0xA0>, <0x1c054 0x10>; clocks = <&coreclk 1>; }; diff --git a/dts/src/arm/at91-ariag25.dts b/dts/src/arm/at91-ariag25.dts index 55ab6180e3..e9ced30159 100644 --- a/dts/src/arm/at91-ariag25.dts +++ b/dts/src/arm/at91-ariag25.dts @@ -42,6 +42,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/dts/src/arm/at91-cosino.dtsi b/dts/src/arm/at91-cosino.dtsi index df4b786956..b6ea3f4a72 100644 --- a/dts/src/arm/at91-cosino.dtsi +++ b/dts/src/arm/at91-cosino.dtsi @@ -34,6 +34,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/dts/src/arm/at91-foxg20.dts b/dts/src/arm/at91-foxg20.dts index cbe9673439..f89598af4c 100644 --- a/dts/src/arm/at91-foxg20.dts +++ b/dts/src/arm/at91-foxg20.dts @@ -31,6 +31,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <18432000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; }; ahb { diff --git a/dts/src/arm/at91-qil_a9260.dts b/dts/src/arm/at91-qil_a9260.dts index 5576ae8786..a9aef53ab7 100644 --- a/dts/src/arm/at91-qil_a9260.dts +++ b/dts/src/arm/at91-qil_a9260.dts @@ -28,6 +28,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/dts/src/arm/at91-sama5d3_xplained.dts b/dts/src/arm/at91-sama5d3_xplained.dts index 5b8e40400b..fec1fca2ad 100644 --- a/dts/src/arm/at91-sama5d3_xplained.dts +++ b/dts/src/arm/at91-sama5d3_xplained.dts @@ -21,12 +21,14 @@ reg = <0x20000000 0x10000000>; }; - slow_xtal { - clock-frequency = <32768>; - }; + clocks { + slow_xtal { + clock-frequency = <32768>; + }; - main_xtal { - clock-frequency = <12000000>; + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/dts/src/arm/at91rm9200.dtsi b/dts/src/arm/at91rm9200.dtsi index c61b16fba7..65ccf564b9 100644 --- a/dts/src/arm/at91rm9200.dtsi +++ b/dts/src/arm/at91rm9200.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel AT91RM9200 family SoC"; @@ -51,6 +52,20 @@ reg = <0x20000000 0x04000000>; }; + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -79,6 +94,260 @@ pmc: pmc@fffffc00 { compatible = "atmel,at91rm9200-pmc"; reg = <0xfffffc00 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + #clock-cells = <0>; + clocks = <&main_osc>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <1000000 32000000>; + #atmel,pll-clk-output-range-cells = <3>; + atmel,pll-clk-output-ranges = <80000000 160000000 0>, + <150000000 180000000 2>; + }; + + pllb: pllbck { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKB>; + clocks = <&main>; + reg = <1>; + atmel,clk-input-range = <1000000 32000000>; + #atmel,pll-clk-output-range-cells = <3>; + atmel,pll-clk-output-ranges = <80000000 160000000 0>, + <150000000 180000000 2>; + }; + + mck: masterck { + compatible = "atmel,at91rm9200-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; + atmel,clk-output-range = <0 80000000>; + atmel,clk-divisors = <1 2 3 4>; + }; + + usb: usbck { + compatible = "atmel,at91rm9200-clk-usb"; + #clock-cells = <0>; + atmel,clk-divisors = <1 2>; + clocks = <&pllb>; + }; + + prog: progck { + compatible = "atmel,at91rm9200-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + + prog2: prog2 { + #clock-cells = <0>; + reg = <2>; + interrupts = <AT91_PMC_PCKRDY(2)>; + }; + + prog3: prog3 { + #clock-cells = <0>; + reg = <3>; + interrupts = <AT91_PMC_PCKRDY(3)>; + }; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + udpck: udpck { + #clock-cells = <0>; + reg = <2>; + clocks = <&usb>; + }; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <4>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + + pck2: pck2 { + #clock-cells = <0>; + reg = <10>; + clocks = <&prog2>; + }; + + pck3: pck3 { + #clock-cells = <0>; + reg = <11>; + clocks = <&prog3>; + }; + }; + + periphck { + compatible = "atmel,at91rm9200-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioB_clk: pioB_clk { + #clock-cells = <0>; + reg = <3>; + }; + + pioC_clk: pioC_clk { + #clock-cells = <0>; + reg = <4>; + }; + + pioD_clk: pioD_clk { + #clock-cells = <0>; + reg = <5>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <7>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <8>; + }; + + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <9>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <10>; + }; + + udc_clk: udc_clk { + #clock-cells = <0>; + reg = <11>; + }; + + twi0_clk: twi0_clk { + reg = <12>; + #clock-cells = <0>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <13>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <14>; + }; + + ssc1_clk: ssc1_clk { + #clock-cells = <0>; + reg = <15>; + }; + + ssc2_clk: ssc2_clk { + #clock-cells = <0>; + reg = <16>; + }; + + tc0_clk: tc0_clk { + #clock-cells = <0>; + reg = <17>; + }; + + tc1_clk: tc1_clk { + #clock-cells = <0>; + reg = <18>; + }; + + tc2_clk: tc2_clk { + #clock-cells = <0>; + reg = <19>; + }; + + tc3_clk: tc3_clk { + #clock-cells = <0>; + reg = <20>; + }; + + tc4_clk: tc4_clk { + #clock-cells = <0>; + reg = <21>; + }; + + tc5_clk: tc5_clk { + #clock-cells = <0>; + reg = <22>; + }; + + ohci_clk: ohci_clk { + #clock-cells = <0>; + reg = <23>; + }; + + macb0_clk: macb0_clk { + #clock-cells = <0>; + reg = <24>; + }; + }; }; st: timer@fffffd00 { @@ -93,6 +362,8 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 19 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; }; tcb1: timer@fffa4000 { @@ -101,6 +372,8 @@ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0 21 IRQ_TYPE_LEVEL_HIGH 0 22 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; }; i2c0: i2c@fffb8000 { @@ -109,6 +382,7 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_twi>; + clocks = <&twi0_clk>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -118,6 +392,8 @@ compatible = "atmel,hsmci"; reg = <0xfffb4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -130,6 +406,8 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disable"; }; @@ -139,6 +417,8 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + clocks = <&ssc1_clk>; + clock-names = "pclk"; status = "disable"; }; @@ -148,6 +428,8 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; + clocks = <&ssc2_clk>; + clock-names = "pclk"; status = "disable"; }; @@ -158,6 +440,8 @@ phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; + clocks = <&macb0_clk>; + clock-names = "ether_clk"; status = "disabled"; }; @@ -496,6 +780,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioA_clk>; }; pioB: gpio@fffff600 { @@ -506,6 +791,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioB_clk>; }; pioC: gpio@fffff800 { @@ -516,6 +802,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioC_clk>; }; pioD: gpio@fffffa00 { @@ -526,6 +813,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioD_clk>; }; }; @@ -535,6 +823,8 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -546,6 +836,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -557,6 +849,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -568,6 +862,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -579,6 +875,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -586,6 +884,8 @@ compatible = "atmel,at91rm9200-udc"; reg = <0xfffb0000 0x4000>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udc_clk>, <&udpck>; + clock-names = "pclk", "hclk"; status = "disabled"; }; @@ -597,6 +897,8 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; }; @@ -622,6 +924,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/dts/src/arm/at91rm9200ek.dts b/dts/src/arm/at91rm9200ek.dts index df6b0aa0e4..43eb779dd6 100644 --- a/dts/src/arm/at91rm9200ek.dts +++ b/dts/src/arm/at91rm9200ek.dts @@ -25,6 +25,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <18432000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; }; ahb { diff --git a/dts/src/arm/at91sam9260.dtsi b/dts/src/arm/at91sam9260.dtsi index c0e0eae16a..cb100b03a3 100644 --- a/dts/src/arm/at91sam9260.dtsi +++ b/dts/src/arm/at91sam9260.dtsi @@ -12,6 +12,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel AT91SAM9260 family SoC"; @@ -48,6 +49,26 @@ reg = <0x20000000 0x04000000>; }; + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <5000000>; + }; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -74,8 +95,260 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,at91sam9260-pmc"; reg = <0xfffffc00 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + #clock-cells = <0>; + clocks = <&main_osc>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9260-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc>, <&slow_xtal>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <1000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <80000000 160000000 0 1>, + <150000000 240000000 2 1>; + }; + + pllb: pllbck { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKB>; + clocks = <&main>; + reg = <1>; + atmel,clk-input-range = <1000000 5000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; + }; + + mck: masterck { + compatible = "atmel,at91rm9200-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + atmel,clk-output-range = <0 105000000>; + atmel,clk-divisors = <1 2 4 0>; + }; + + usb: usbck { + compatible = "atmel,at91rm9200-clk-usb"; + #clock-cells = <0>; + atmel,clk-divisors = <1 2 4 0>; + clocks = <&pllb>; + }; + + prog: progck { + compatible = "atmel,at91rm9200-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + }; + + periphck { + compatible = "atmel,at91rm9200-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioB_clk: pioB_clk { + #clock-cells = <0>; + reg = <3>; + }; + + pioC_clk: pioC_clk { + #clock-cells = <0>; + reg = <4>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <5>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <7>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <8>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <9>; + }; + + udc_clk: udc_clk { + #clock-cells = <0>; + reg = <10>; + }; + + twi0_clk: twi0_clk { + reg = <11>; + #clock-cells = <0>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <12>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <13>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <14>; + }; + + tc0_clk: tc0_clk { + #clock-cells = <0>; + reg = <17>; + }; + + tc1_clk: tc1_clk { + #clock-cells = <0>; + reg = <18>; + }; + + tc2_clk: tc2_clk { + #clock-cells = <0>; + reg = <19>; + }; + + ohci_clk: ohci_clk { + #clock-cells = <0>; + reg = <20>; + }; + + macb0_clk: macb0_clk { + #clock-cells = <0>; + reg = <21>; + }; + + isi_clk: isi_clk { + #clock-cells = <0>; + reg = <22>; + }; + + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <23>; + }; + + uart0_clk: uart0_clk { + #clock-cells = <0>; + reg = <24>; + }; + + uart1_clk: uart1_clk { + #clock-cells = <0>; + reg = <25>; + }; + + tc3_clk: tc3_clk { + #clock-cells = <0>; + reg = <26>; + }; + + tc4_clk: tc4_clk { + #clock-cells = <0>; + reg = <27>; + }; + + tc5_clk: tc5_clk { + #clock-cells = <0>; + reg = <28>; + }; + }; }; rstc@fffffd00 { @@ -92,6 +365,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; }; tcb0: timer@fffa0000 { @@ -100,6 +374,8 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 19 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; }; tcb1: timer@fffdc000 { @@ -108,6 +384,8 @@ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0 27 IRQ_TYPE_LEVEL_HIGH 0 28 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; }; pinctrl@fffff400 { @@ -443,6 +721,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioA_clk>; }; pioB: gpio@fffff600 { @@ -453,6 +732,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioB_clk>; }; pioC: gpio@fffff800 { @@ -463,6 +743,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioC_clk>; }; }; @@ -472,6 +753,8 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -483,6 +766,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -494,6 +779,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -505,6 +792,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -516,6 +805,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -527,6 +818,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -538,6 +831,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + clocks = <&uart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -547,6 +842,8 @@ interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; + clocks = <&macb0_clk>, <&macb0_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -554,6 +851,8 @@ compatible = "atmel,at91rm9200-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udc_clk>, <&udpck>; + clock-names = "pclk", "hclk"; status = "disabled"; }; @@ -563,6 +862,7 @@ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi0_clk>; status = "disabled"; }; @@ -573,6 +873,8 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; status = "disabled"; }; @@ -582,6 +884,8 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -593,6 +897,8 @@ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -604,6 +910,8 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -613,6 +921,8 @@ compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&adc_clk>, <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xf>; atmel,adc-vref = <3300>; @@ -680,6 +990,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/dts/src/arm/at91sam9261.dtsi b/dts/src/arm/at91sam9261.dtsi index 04927db1d6..a81aab4281 100644 --- a/dts/src/arm/at91sam9261.dtsi +++ b/dts/src/arm/at91sam9261.dtsi @@ -46,16 +46,18 @@ reg = <0x20000000 0x08000000>; }; - main_xtal: main_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + clocks { + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - slow_xtal: slow_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; }; ahb { diff --git a/dts/src/arm/at91sam9261ek.dts b/dts/src/arm/at91sam9261ek.dts index aa35a7aec9..f4a765729c 100644 --- a/dts/src/arm/at91sam9261ek.dts +++ b/dts/src/arm/at91sam9261ek.dts @@ -20,14 +20,6 @@ reg = <0x20000000 0x4000000>; }; - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <18432000>; - }; - clocks { #address-cells = <1>; #size-cells = <1>; @@ -37,6 +29,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <18432000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; }; ahb { diff --git a/dts/src/arm/at91sam9263.dtsi b/dts/src/arm/at91sam9263.dtsi index fece8665fb..bb23c2d33c 100644 --- a/dts/src/arm/at91sam9263.dtsi +++ b/dts/src/arm/at91sam9263.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel AT91SAM9263 family SoC"; @@ -32,6 +33,7 @@ ssc1 = &ssc1; pwm0 = &pwm0; }; + cpus { #address-cells = <0>; #size-cells = <0>; @@ -46,6 +48,20 @@ reg = <0x20000000 0x08000000>; }; + clocks { + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -69,6 +85,264 @@ pmc: pmc@fffffc00 { compatible = "atmel,at91rm9200-pmc"; reg = <0xfffffc00 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + #clock-cells = <0>; + clocks = <&main_osc>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <1000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, + <190000000 240000000 2 1>; + }; + + pllb: pllbck { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKB>; + clocks = <&main>; + reg = <1>; + atmel,clk-input-range = <1000000 5000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; + }; + + mck: masterck { + compatible = "atmel,at91rm9200-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; + atmel,clk-output-range = <0 120000000>; + atmel,clk-divisors = <1 2 4 0>; + }; + + usb: usbck { + compatible = "atmel,at91rm9200-clk-usb"; + #clock-cells = <0>; + atmel,clk-divisors = <1 2 4 0>; + clocks = <&pllb>; + }; + + prog: progck { + compatible = "atmel,at91rm9200-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + + prog2: prog2 { + #clock-cells = <0>; + reg = <2>; + interrupts = <AT91_PMC_PCKRDY(2)>; + }; + + prog3: prog3 { + #clock-cells = <0>; + reg = <3>; + interrupts = <AT91_PMC_PCKRDY(3)>; + }; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + + pck2: pck2 { + #clock-cells = <0>; + reg = <10>; + clocks = <&prog2>; + }; + + pck3: pck3 { + #clock-cells = <0>; + reg = <11>; + clocks = <&prog3>; + }; + }; + + periphck { + compatible = "atmel,at91rm9200-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioB_clk: pioB_clk { + #clock-cells = <0>; + reg = <3>; + }; + + pioCDE_clk: pioCDE_clk { + #clock-cells = <0>; + reg = <4>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <7>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <8>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <9>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <10>; + }; + + mci1_clk: mci1_clk { + #clock-cells = <0>; + reg = <11>; + }; + + can_clk: can_clk { + #clock-cells = <0>; + reg = <12>; + }; + + twi0_clk: twi0_clk { + #clock-cells = <0>; + reg = <13>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <14>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <15>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <16>; + }; + + ssc1_clk: ssc1_clk { + #clock-cells = <0>; + reg = <17>; + }; + + ac91_clk: ac97_clk { + #clock-cells = <0>; + reg = <18>; + }; + + tcb_clk: tcb_clk { + #clock-cells = <0>; + reg = <19>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <20>; + }; + + macb0_clk: macb0_clk { + #clock-cells = <0>; + reg = <21>; + }; + + g2de_clk: g2de_clk { + #clock-cells = <0>; + reg = <23>; + }; + + udc_clk: udc_clk { + #clock-cells = <0>; + reg = <24>; + }; + + isi_clk: isi_clk { + #clock-cells = <0>; + reg = <25>; + }; + + lcd_clk: lcd_clk { + #clock-cells = <0>; + reg = <26>; + }; + + dma_clk: dma_clk { + #clock-cells = <0>; + reg = <27>; + }; + + ohci_clk: ohci_clk { + #clock-cells = <0>; + reg = <29>; + }; + }; }; ramc: ramc@ffffe200 { @@ -81,12 +355,15 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; }; tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb_clk>; + clock-names = "t0_clk"; }; rstc@fffffd00 { @@ -403,6 +680,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioA_clk>; }; pioB: gpio@fffff400 { @@ -413,6 +691,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioB_clk>; }; pioC: gpio@fffff600 { @@ -423,6 +702,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCDE_clk>; }; pioD: gpio@fffff800 { @@ -433,6 +713,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCDE_clk>; }; pioE: gpio@fffffa00 { @@ -443,6 +724,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCDE_clk>; }; }; @@ -452,6 +734,8 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -463,6 +747,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -474,6 +760,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -485,6 +773,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -494,6 +784,8 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -503,6 +795,8 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + clocks = <&ssc1_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -512,6 +806,8 @@ interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; + clocks = <&macb0_clk>, <&macb0_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -519,6 +815,8 @@ compatible = "atmel,at91rm9200-udc"; reg = <0xfff78000 0x4000>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udc_clk>, <&udpck>; + clock-names = "pclk", "hclk"; status = "disabled"; }; @@ -528,6 +826,7 @@ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi0_clk>; status = "disabled"; }; @@ -537,6 +836,8 @@ interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; status = "disabled"; }; @@ -546,6 +847,8 @@ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&mci1_clk>; + clock-names = "mci_clk"; status = "disabled"; }; @@ -568,6 +871,8 @@ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -579,6 +884,8 @@ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -587,6 +894,8 @@ reg = <0xfffb8000 0x300>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; + clocks = <&pwm_clk>; + clock-names = "pwm_clk"; status = "disabled"; }; }; @@ -622,6 +931,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/dts/src/arm/at91sam9263ek.dts b/dts/src/arm/at91sam9263ek.dts index 15009c9f22..5cf93eecd8 100644 --- a/dts/src/arm/at91sam9263ek.dts +++ b/dts/src/arm/at91sam9263ek.dts @@ -29,6 +29,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <16367660>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <16367660>; + }; }; ahb { diff --git a/dts/src/arm/at91sam9g20.dtsi b/dts/src/arm/at91sam9g20.dtsi index b8e7946601..31f7652612 100644 --- a/dts/src/arm/at91sam9g20.dtsi +++ b/dts/src/arm/at91sam9g20.dtsi @@ -25,6 +25,30 @@ adc0: adc@fffe0000 { atmel,adc-startup-time = <40>; }; + + pmc: pmc@fffffc00 { + plla: pllack { + atmel,clk-input-range = <2000000 32000000>; + atmel,pll-clk-output-ranges = <745000000 800000000 0 0>, + <695000000 750000000 1 0>, + <645000000 700000000 2 0>, + <595000000 650000000 3 0>, + <545000000 600000000 0 1>, + <495000000 550000000 1 1>, + <445000000 500000000 2 1>, + <400000000 450000000 3 1>; + }; + + pllb: pllbck { + atmel,clk-input-range = <2000000 32000000>; + atmel,pll-clk-output-ranges = <30000000 100000000 0 0>; + }; + + mck: masterck { + atmel,clk-output-range = <0 133000000>; + atmel,clk-divisors = <1 2 4 6>; + }; + }; }; }; }; diff --git a/dts/src/arm/at91sam9g20ek_common.dtsi b/dts/src/arm/at91sam9g20ek_common.dtsi index cb2c010e08..d2919108e9 100644 --- a/dts/src/arm/at91sam9g20ek_common.dtsi +++ b/dts/src/arm/at91sam9g20ek_common.dtsi @@ -26,6 +26,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <18432000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; }; ahb { diff --git a/dts/src/arm/at91sam9g45.dtsi b/dts/src/arm/at91sam9g45.dtsi index ace6bf197b..932a669156 100644 --- a/dts/src/arm/at91sam9g45.dtsi +++ b/dts/src/arm/at91sam9g45.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/pinctrl/at91.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/at91.h> / { model = "Atmel AT91SAM9G45 family SoC"; @@ -53,6 +54,26 @@ reg = <0x70000000 0x10000000>; }; + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <300000>; + }; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -77,11 +98,279 @@ compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe400 0x200 0xffffe600 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,at91sam9g45-pmc"; reg = <0xfffffc00 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + #clock-cells = <0>; + clocks = <&main_osc>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <2000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <745000000 800000000 0 0 + 695000000 750000000 1 0 + 645000000 700000000 2 0 + 595000000 650000000 3 0 + 545000000 600000000 0 1 + 495000000 555000000 1 1 + 445000000 500000000 2 1 + 400000000 450000000 3 1>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKU>; + clocks = <&main>; + }; + + mck: masterck { + compatible = "atmel,at91rm9200-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>; + atmel,clk-output-range = <0 133333333>; + atmel,clk-divisors = <1 2 4 3>; + }; + + usb: usbck { + compatible = "atmel,at91sam9x5-clk-usb"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + prog: progck { + compatible = "atmel,at91sam9g45-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = <AT91_PMC_PCKRDY(0)>; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = <AT91_PMC_PCKRDY(1)>; + }; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck: ddrck { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + }; + + periphck { + compatible = "atmel,at91rm9200-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioB_clk: pioB_clk { + #clock-cells = <0>; + reg = <3>; + }; + + pioC_clk: pioC_clk { + #clock-cells = <0>; + reg = <4>; + }; + + pioDE_clk: pioDE_clk { + #clock-cells = <0>; + reg = <5>; + }; + + trng_clk: trng_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <7>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <8>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <9>; + }; + + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <10>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <11>; + }; + + twi0_clk: twi0_clk { + #clock-cells = <0>; + reg = <12>; + }; + + twi1_clk: twi1_clk { + #clock-cells = <0>; + reg = <13>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <14>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <15>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <16>; + }; + + ssc1_clk: ssc1_clk { + #clock-cells = <0>; + reg = <17>; + }; + + tcb0_clk: tcb0_clk { + #clock-cells = <0>; + reg = <18>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <19>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <20>; + }; + + dma0_clk: dma0_clk { + #clock-cells = <0>; + reg = <21>; + }; + + uhphs_clk: uhphs_clk { + #clock-cells = <0>; + reg = <22>; + }; + + lcd_clk: lcd_clk { + #clock-cells = <0>; + reg = <23>; + }; + + ac97_clk: ac97_clk { + #clock-cells = <0>; + reg = <24>; + }; + + macb0_clk: macb0_clk { + #clock-cells = <0>; + reg = <25>; + }; + + isi_clk: isi_clk { + #clock-cells = <0>; + reg = <26>; + }; + + udphs_clk: udphs_clk { + #clock-cells = <0>; + reg = <27>; + }; + + aestdessha_clk: aestdessha_clk { + #clock-cells = <0>; + reg = <28>; + }; + + mci1_clk: mci1_clk { + #clock-cells = <0>; + reg = <29>; + }; + + vdec_clk: vdec_clk { + #clock-cells = <0>; + reg = <30>; + }; + }; }; rstc@fffffd00 { @@ -93,6 +382,7 @@ compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; }; @@ -105,12 +395,16 @@ compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; }; tcb1: timer@fffd4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffd4000 0x100>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; }; dma: dma-controller@ffffec00 { @@ -118,6 +412,8 @@ reg = <0xffffec00 0x200>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; }; pinctrl@fffff200 { @@ -516,6 +812,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioA_clk>; }; pioB: gpio@fffff400 { @@ -526,6 +823,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioB_clk>; }; pioC: gpio@fffff600 { @@ -536,6 +834,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioC_clk>; }; pioD: gpio@fffff800 { @@ -546,6 +845,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioDE_clk>; }; pioE: gpio@fffffa00 { @@ -556,6 +856,7 @@ gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioDE_clk>; }; }; @@ -565,6 +866,8 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -576,6 +879,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -587,6 +892,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -598,6 +905,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -609,6 +918,8 @@ atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -618,6 +929,8 @@ interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; + clocks = <&macb0_clk>, <&macb0_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -629,6 +942,7 @@ pinctrl-0 = <&pinctrl_i2c0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi0_clk>; status = "disabled"; }; @@ -640,6 +954,7 @@ pinctrl-0 = <&pinctrl_i2c1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi1_clk>; status = "disabled"; }; @@ -649,6 +964,8 @@ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -658,6 +975,8 @@ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + clocks = <&ssc1_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -667,6 +986,8 @@ compatible = "atmel,at91sam9g45-adc"; reg = <0xfffb0000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&adc_clk>, <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; atmel,adc-startup-time = <40>; @@ -706,6 +1027,7 @@ reg = <0xfffb8000 0x300>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; + clocks = <&pwm_clk>; status = "disabled"; }; @@ -718,6 +1040,8 @@ dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; status = "disabled"; }; @@ -730,6 +1054,8 @@ dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; + clocks = <&mci1_clk>; + clock-names = "mci_clk"; status = "disabled"; }; @@ -752,6 +1078,8 @@ interrupts = <14 4 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -763,6 +1091,8 @@ interrupts = <15 4 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -773,6 +1103,8 @@ reg = <0x00600000 0x80000 0xfff78000 0x400>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&udphs_clk>, <&utmi>; + clock-names = "pclk", "hclk"; status = "disabled"; ep0 { @@ -835,6 +1167,8 @@ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; + clocks = <&lcd_clk>, <&lcd_clk>; + clock-names = "hclk", "lcdc_clk"; status = "disabled"; }; @@ -861,6 +1195,9 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + //TODO + clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -868,6 +1205,9 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + //TODO + clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/dts/src/arm/at91sam9m10g45ek.dts b/dts/src/arm/at91sam9m10g45ek.dts index 9f5b0a6749..96ccc7de4f 100644 --- a/dts/src/arm/at91sam9m10g45ek.dts +++ b/dts/src/arm/at91sam9m10g45ek.dts @@ -31,6 +31,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/dts/src/arm/at91sam9n12.dtsi b/dts/src/arm/at91sam9n12.dtsi index b84bac5bad..2bfac310db 100644 --- a/dts/src/arm/at91sam9n12.dtsi +++ b/dts/src/arm/at91sam9n12.dtsi @@ -50,16 +50,18 @@ reg = <0x20000000 0x10000000>; }; - slow_xtal: slow_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - main_xtal: main_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; }; ahb { diff --git a/dts/src/arm/at91sam9n12ek.dts b/dts/src/arm/at91sam9n12ek.dts index 64bbe46e4f..83d723711a 100644 --- a/dts/src/arm/at91sam9n12ek.dts +++ b/dts/src/arm/at91sam9n12ek.dts @@ -21,14 +21,6 @@ reg = <0x20000000 0x8000000>; }; - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <16000000>; - }; - clocks { #address-cells = <1>; #size-cells = <1>; @@ -38,6 +30,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <16000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <16000000>; + }; }; ahb { @@ -56,6 +56,8 @@ wm8904: codec@1a { compatible = "wm8904"; reg = <0x1a>; + clocks = <&pck0>; + clock-names = "mclk"; }; qt1070: keyboard@1b { diff --git a/dts/src/arm/at91sam9rl.dtsi b/dts/src/arm/at91sam9rl.dtsi index 1da183155e..ab56c8b81d 100644 --- a/dts/src/arm/at91sam9rl.dtsi +++ b/dts/src/arm/at91sam9rl.dtsi @@ -50,19 +50,19 @@ reg = <0x20000000 0x04000000>; }; - slow_xtal: slow_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - main_xtal: main_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - clocks { adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; #clock-cells = <0>; @@ -95,6 +95,7 @@ <0xffffe800 0x200>; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + atmel,nand-has-dma; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; gpios = <&pioD 17 GPIO_ACTIVE_HIGH>, @@ -348,6 +349,15 @@ }; }; + dma0: dma-controller@ffffe600 { + compatible = "atmel,at91sam9rl-dma"; + reg = <0xffffe600 0x200>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <2>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; + }; + ramc0: ramc@ffffea00 { compatible = "atmel,at91sam9260-sdramc"; reg = <0xffffea00 0x200>; diff --git a/dts/src/arm/at91sam9rlek.dts b/dts/src/arm/at91sam9rlek.dts index d4a010e40f..9be5b540ee 100644 --- a/dts/src/arm/at91sam9rlek.dts +++ b/dts/src/arm/at91sam9rlek.dts @@ -20,15 +20,6 @@ reg = <0x20000000 0x4000000>; }; - - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - clocks { #address-cells = <1>; #size-cells = <1>; @@ -38,6 +29,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/dts/src/arm/at91sam9x5.dtsi b/dts/src/arm/at91sam9x5.dtsi index 2c0d6ea3ab..e1a5c70b88 100644 --- a/dts/src/arm/at91sam9x5.dtsi +++ b/dts/src/arm/at91sam9x5.dtsi @@ -52,22 +52,24 @@ reg = <0x20000000 0x10000000>; }; - slow_xtal: slow_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - main_xtal: main_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - adc_op_clk: adc_op_clk{ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <5000000>; + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <5000000>; + }; }; ahb { diff --git a/dts/src/arm/at91sam9x5cm.dtsi b/dts/src/arm/at91sam9x5cm.dtsi index 8413e21192..229d6c24a9 100644 --- a/dts/src/arm/at91sam9x5cm.dtsi +++ b/dts/src/arm/at91sam9x5cm.dtsi @@ -23,12 +23,14 @@ }; }; - slow_xtal { - clock-frequency = <32768>; - }; + clocks { + slow_xtal { + clock-frequency = <32768>; + }; - main_xtal { - clock-frequency = <12000000>; + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/dts/src/arm/bcm11351.dtsi b/dts/src/arm/bcm11351.dtsi index 6b05ae6d47..2ddaa51366 100644 --- a/dts/src/arm/bcm11351.dtsi +++ b/dts/src/arm/bcm11351.dtsi @@ -27,6 +27,25 @@ bootargs = "console=ttyS0,115200n8"; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm11351-cpu-method"; + secondary-boot-reg = <0x3500417c>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + gic: interrupt-controller@3ff00100 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; diff --git a/dts/src/arm/bcm21664.dtsi b/dts/src/arm/bcm21664.dtsi index 8b366822bb..2016b72a8f 100644 --- a/dts/src/arm/bcm21664.dtsi +++ b/dts/src/arm/bcm21664.dtsi @@ -27,6 +27,25 @@ bootargs = "console=ttyS0,115200n8"; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm11351-cpu-method"; + secondary-boot-reg = <0x35004178>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + gic: interrupt-controller@3ff00100 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; diff --git a/dts/src/arm/bcm7445-bcm97445svmb.dts b/dts/src/arm/bcm7445-bcm97445svmb.dts new file mode 100644 index 0000000000..9eec2ac111 --- /dev/null +++ b/dts/src/arm/bcm7445-bcm97445svmb.dts @@ -0,0 +1,14 @@ +/dts-v1/; +#include "bcm7445.dtsi" + +/ { + model = "Broadcom STB (bcm7445), SVMB reference board"; + compatible = "brcm,bcm7445", "brcm,brcmstb"; + + memory { + device_type = "memory"; + reg = <0x00 0x00000000 0x00 0x40000000>, + <0x00 0x40000000 0x00 0x40000000>, + <0x00 0x80000000 0x00 0x40000000>; + }; +}; diff --git a/dts/src/arm/bcm7445.dtsi b/dts/src/arm/bcm7445.dtsi new file mode 100644 index 0000000000..0ca0f4e523 --- /dev/null +++ b/dts/src/arm/bcm7445.dtsi @@ -0,0 +1,111 @@ +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include "skeleton.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Broadcom STB (bcm7445)"; + compatible = "brcm,bcm7445", "brcm,brcmstb"; + interrupt-parent = <&gic>; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "brcm,brahma-b15"; + device_type = "cpu"; + enable-method = "brcm,brahma-b15"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,brahma-b15"; + device_type = "cpu"; + enable-method = "brcm,brahma-b15"; + reg = <1>; + }; + + cpu@2 { + compatible = "brcm,brahma-b15"; + device_type = "cpu"; + enable-method = "brcm,brahma-b15"; + reg = <2>; + }; + + cpu@3 { + compatible = "brcm,brahma-b15"; + device_type = "cpu"; + enable-method = "brcm,brahma-b15"; + reg = <3>; + }; + }; + + gic: interrupt-controller@ffd00000 { + compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic"; + reg = <0x00 0xffd01000 0x00 0x1000>, + <0x00 0xffd02000 0x00 0x2000>, + <0x00 0xffd04000 0x00 0x2000>, + <0x00 0xffd06000 0x00 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>; + }; + + rdb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x00 0xf0000000 0x1000000>; + + serial@40ab00 { + compatible = "ns16550a"; + reg = <0x40ab00 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0x4d3f640>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7445-sun-top-ctrl", + "syscon"; + reg = <0x404000 0x51c>; + }; + + hif_cpubiuctrl: syscon@3e2400 { + compatible = "brcm,bcm7445-hif-cpubiuctrl", + "syscon"; + reg = <0x3e2400 0x5b4>; + }; + + hif_continuation: syscon@452000 { + compatible = "brcm,bcm7445-hif-continuation", + "syscon"; + reg = <0x452000 0x100>; + }; + }; + + smpboot { + compatible = "brcm,brcmstb-smpboot"; + syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>; + syscon-cont = <&hif_continuation>; + }; + + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; +}; diff --git a/dts/src/arm/berlin2.dtsi b/dts/src/arm/berlin2.dtsi index 2477dac4d6..9d7c810ebd 100644 --- a/dts/src/arm/berlin2.dtsi +++ b/dts/src/arm/berlin2.dtsi @@ -22,6 +22,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,berlin-smp"; cpu@0 { compatible = "marvell,pj4b"; @@ -78,6 +79,11 @@ clocks = <&chip CLKID_TWD>; }; + cpu-ctrl@dd0000 { + compatible = "marvell,berlin-cpu-ctrl"; + reg = <0xdd0000 0x10000>; + }; + apb@e80000 { compatible = "simple-bus"; #address-cells = <1>; diff --git a/dts/src/arm/berlin2q-marvell-dmp.dts b/dts/src/arm/berlin2q-marvell-dmp.dts index 995150f937..a357ce02a6 100644 --- a/dts/src/arm/berlin2q-marvell-dmp.dts +++ b/dts/src/arm/berlin2q-marvell-dmp.dts @@ -34,6 +34,14 @@ status = "okay"; }; +&i2c0 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/dts/src/arm/berlin2q.dtsi b/dts/src/arm/berlin2q.dtsi index 635a16a64c..400c40fcec 100644 --- a/dts/src/arm/berlin2q.dtsi +++ b/dts/src/arm/berlin2q.dtsi @@ -18,6 +18,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,berlin-smp"; cpu@0 { compatible = "arm,cortex-a9"; @@ -90,6 +91,8 @@ compatible = "arm,pl310-cache"; reg = <0xac0000 0x1000>; cache-level = <2>; + arm,data-latency = <2 2 2>; + arm,tag-latency = <2 2 2>; }; scu: snoop-control-unit@ad0000 { @@ -111,6 +114,11 @@ #interrupt-cells = <3>; }; + cpu-ctrl@dd0000 { + compatible = "marvell,berlin-cpu-ctrl"; + reg = <0xdd0000 0x10000>; + }; + apb@e80000 { compatible = "simple-bus"; #address-cells = <1>; @@ -191,6 +199,32 @@ }; }; + i2c0: i2c@1400 { + compatible = "snps,designware-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1400 0x100>; + interrupt-parent = <&aic>; + interrupts = <4>; + clocks = <&chip CLKID_CFG>; + pinctrl-0 = <&twsi0_pmux>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c1: i2c@1800 { + compatible = "snps,designware-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1800 0x100>; + interrupt-parent = <&aic>; + interrupts = <5>; + clocks = <&chip CLKID_CFG>; + pinctrl-0 = <&twsi1_pmux>; + pinctrl-names = "default"; + status = "disabled"; + }; + timer0: timer@2c00 { compatible = "snps,dw-apb-timer"; reg = <0x2c00 0x14>; @@ -301,6 +335,16 @@ reg = <0xea0000 0x400>, <0xdd0170 0x10>; clocks = <&refclk>; clock-names = "refclk"; + + twsi0_pmux: twsi0-pmux { + groups = "G6"; + function = "twsi0"; + }; + + twsi1_pmux: twsi1-pmux { + groups = "G7"; + function = "twsi1"; + }; }; apb@fc0000 { @@ -311,6 +355,32 @@ ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + i2c2: i2c@7000 { + compatible = "snps,designware-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7000 0x100>; + interrupt-parent = <&sic>; + interrupts = <6>; + clocks = <&refclk>; + pinctrl-0 = <&twsi2_pmux>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c3: i2c@8000 { + compatible = "snps,designware-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x8000 0x100>; + interrupt-parent = <&sic>; + interrupts = <7>; + clocks = <&refclk>; + pinctrl-0 = <&twsi3_pmux>; + pinctrl-names = "default"; + status = "disabled"; + }; + uart0: uart@9000 { compatible = "snps,dw-apb-uart"; reg = <0x9000 0x100>; @@ -348,6 +418,16 @@ groups = "GSM14"; function = "uart1"; }; + + twsi2_pmux: twsi2-pmux { + groups = "GSM13"; + function = "twsi2"; + }; + + twsi3_pmux: twsi3-pmux { + groups = "GSM14"; + function = "twsi3"; + }; }; sic: interrupt-controller@e000 { diff --git a/dts/src/arm/cros-ec-keyboard.dtsi b/dts/src/arm/cros-ec-keyboard.dtsi new file mode 100644 index 0000000000..9c7fb0acae --- /dev/null +++ b/dts/src/arm/cros-ec-keyboard.dtsi @@ -0,0 +1,105 @@ +/* + * Keyboard dts fragment for devices that use cros-ec-keyboard + * + * Copyright (c) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <dt-bindings/input/input.h> + +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb"; + keypad,num-rows = <8>; + keypad,num-columns = <13>; + google,needs-ghost-filter; + + linux,keymap = < + MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA) + MATRIX_KEY(0x00, 0x02, KEY_F1) + MATRIX_KEY(0x00, 0x03, KEY_B) + MATRIX_KEY(0x00, 0x04, KEY_F10) + MATRIX_KEY(0x00, 0x06, KEY_N) + MATRIX_KEY(0x00, 0x08, KEY_EQUAL) + MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT) + + MATRIX_KEY(0x01, 0x01, KEY_ESC) + MATRIX_KEY(0x01, 0x02, KEY_F4) + MATRIX_KEY(0x01, 0x03, KEY_G) + MATRIX_KEY(0x01, 0x04, KEY_F7) + MATRIX_KEY(0x01, 0x06, KEY_H) + MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE) + MATRIX_KEY(0x01, 0x09, KEY_F9) + MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE) + + MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL) + MATRIX_KEY(0x02, 0x01, KEY_TAB) + MATRIX_KEY(0x02, 0x02, KEY_F3) + MATRIX_KEY(0x02, 0x03, KEY_T) + MATRIX_KEY(0x02, 0x04, KEY_F6) + MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE) + MATRIX_KEY(0x02, 0x06, KEY_Y) + MATRIX_KEY(0x02, 0x07, KEY_102ND) + MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE) + MATRIX_KEY(0x02, 0x09, KEY_F8) + + MATRIX_KEY(0x03, 0x01, KEY_GRAVE) + MATRIX_KEY(0x03, 0x02, KEY_F2) + MATRIX_KEY(0x03, 0x03, KEY_5) + MATRIX_KEY(0x03, 0x04, KEY_F5) + MATRIX_KEY(0x03, 0x06, KEY_6) + MATRIX_KEY(0x03, 0x08, KEY_MINUS) + MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) + + MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) + MATRIX_KEY(0x04, 0x01, KEY_A) + MATRIX_KEY(0x04, 0x02, KEY_D) + MATRIX_KEY(0x04, 0x03, KEY_F) + MATRIX_KEY(0x04, 0x04, KEY_S) + MATRIX_KEY(0x04, 0x05, KEY_K) + MATRIX_KEY(0x04, 0x06, KEY_J) + MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON) + MATRIX_KEY(0x04, 0x09, KEY_L) + MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH) + MATRIX_KEY(0x04, 0x0b, KEY_ENTER) + + MATRIX_KEY(0x05, 0x01, KEY_Z) + MATRIX_KEY(0x05, 0x02, KEY_C) + MATRIX_KEY(0x05, 0x03, KEY_V) + MATRIX_KEY(0x05, 0x04, KEY_X) + MATRIX_KEY(0x05, 0x05, KEY_COMMA) + MATRIX_KEY(0x05, 0x06, KEY_M) + MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT) + MATRIX_KEY(0x05, 0x08, KEY_SLASH) + MATRIX_KEY(0x05, 0x09, KEY_DOT) + MATRIX_KEY(0x05, 0x0b, KEY_SPACE) + + MATRIX_KEY(0x06, 0x01, KEY_1) + MATRIX_KEY(0x06, 0x02, KEY_3) + MATRIX_KEY(0x06, 0x03, KEY_4) + MATRIX_KEY(0x06, 0x04, KEY_2) + MATRIX_KEY(0x06, 0x05, KEY_8) + MATRIX_KEY(0x06, 0x06, KEY_7) + MATRIX_KEY(0x06, 0x08, KEY_0) + MATRIX_KEY(0x06, 0x09, KEY_9) + MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT) + MATRIX_KEY(0x06, 0x0b, KEY_DOWN) + MATRIX_KEY(0x06, 0x0c, KEY_RIGHT) + + MATRIX_KEY(0x07, 0x01, KEY_Q) + MATRIX_KEY(0x07, 0x02, KEY_E) + MATRIX_KEY(0x07, 0x03, KEY_R) + MATRIX_KEY(0x07, 0x04, KEY_W) + MATRIX_KEY(0x07, 0x05, KEY_I) + MATRIX_KEY(0x07, 0x06, KEY_U) + MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT) + MATRIX_KEY(0x07, 0x08, KEY_P) + MATRIX_KEY(0x07, 0x09, KEY_O) + MATRIX_KEY(0x07, 0x0b, KEY_UP) + MATRIX_KEY(0x07, 0x0c, KEY_LEFT) + >; + }; +}; diff --git a/dts/src/arm/dove-cubox-es.dts b/dts/src/arm/dove-cubox-es.dts new file mode 100644 index 0000000000..e28ef056dd --- /dev/null +++ b/dts/src/arm/dove-cubox-es.dts @@ -0,0 +1,12 @@ +#include "dove-cubox.dts" + +/ { + model = "SolidRun CuBox (Engineering Sample)"; + compatible = "solidrun,cubox-es", "solidrun,cubox", "marvell,dove"; +}; + +&sdio0 { + /* sdio0 card detect is connected to wrong pin on CuBox ES */ + cd-gpios = <&gpio0 12 1>; + pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>; +}; diff --git a/dts/src/arm/dove-cubox.dts b/dts/src/arm/dove-cubox.dts index 7a70f4ca50..aae7efc09b 100644 --- a/dts/src/arm/dove-cubox.dts +++ b/dts/src/arm/dove-cubox.dts @@ -111,9 +111,6 @@ &sdio0 { status = "okay"; - /* sdio0 card detect is connected to wrong pin on CuBox */ - cd-gpios = <&gpio0 12 1>; - pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>; }; &spi0 { diff --git a/dts/src/arm/dove.dtsi b/dts/src/arm/dove.dtsi index 3b891dd209..a5441d5482 100644 --- a/dts/src/arm/dove.dtsi +++ b/dts/src/arm/dove.dtsi @@ -630,6 +630,20 @@ reg = <0xe8400 0x0c>; ngpios = <8>; }; + + lcd1: lcd-controller@810000 { + compatible = "marvell,dove-lcd"; + reg = <0x810000 0x1000>; + interrupts = <46>; + status = "disabled"; + }; + + lcd0: lcd-controller@820000 { + compatible = "marvell,dove-lcd"; + reg = <0x820000 0x1000>; + interrupts = <47>; + status = "disabled"; + }; }; }; }; diff --git a/dts/src/arm/dra7-evm.dts b/dts/src/arm/dra7-evm.dts index 83089540e3..50f8022905 100644 --- a/dts/src/arm/dra7-evm.dts +++ b/dts/src/arm/dra7-evm.dts @@ -496,3 +496,11 @@ }; }; }; + +&usb2_phy1 { + phy-supply = <&ldousb_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldousb_reg>; +}; diff --git a/dts/src/arm/dra7.dtsi b/dts/src/arm/dra7.dtsi index 80127638b3..97f603c448 100644 --- a/dts/src/arm/dra7.dtsi +++ b/dts/src/arm/dra7.dtsi @@ -12,6 +12,9 @@ #include "skeleton.dtsi" +#define MAX_SOURCES 400 +#define DIRECT_IRQ(irq) (MAX_SOURCES + irq) + / { #address-cells = <1>; #size-cells = <1>; @@ -45,6 +48,7 @@ compatible = "arm,cortex-a15-gic"; interrupt-controller; #interrupt-cells = <3>; + arm,routable-irqs = <192>; reg = <0x48211000 0x1000>, <0x48212000 0x1000>, <0x48214000 0x2000>, @@ -79,8 +83,8 @@ ti,hwmods = "l3_main_1", "l3_main_2"; reg = <0x44000000 0x1000000>, <0x45000000 0x1000>; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI DIRECT_IRQ(10) IRQ_TYPE_LEVEL_HIGH>; prm: prm@4ae06000 { compatible = "ti,dra7-prm"; @@ -95,6 +99,75 @@ }; }; + axi@0 { + compatible = "simple-bus"; + #size-cells = <1>; + #address-cells = <1>; + ranges = <0x51000000 0x51000000 0x3000 + 0x0 0x20000000 0x10000000>; + pcie@51000000 { + compatible = "ti,dra7-pcie"; + reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; + reg-names = "rc_dbics", "ti_conf", "config"; + interrupts = <0 232 0x4>, <0 233 0x4>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x03000 0 0x00010000 + 0x82000000 0 0x20013000 0x13000 0 0xffed000>; + #interrupt-cells = <1>; + num-lanes = <1>; + ti,hwmods = "pcie1"; + phys = <&pcie1_phy>; + phy-names = "pcie-phy0"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 1>, + <0 0 0 2 &pcie1_intc 2>, + <0 0 0 3 &pcie1_intc 3>, + <0 0 0 4 &pcie1_intc 4>; + pcie1_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + + axi@1 { + compatible = "simple-bus"; + #size-cells = <1>; + #address-cells = <1>; + ranges = <0x51800000 0x51800000 0x3000 + 0x0 0x30000000 0x10000000>; + status = "disabled"; + pcie@51000000 { + compatible = "ti,dra7-pcie"; + reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; + reg-names = "rc_dbics", "ti_conf", "config"; + interrupts = <0 355 0x4>, <0 356 0x4>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x03000 0 0x00010000 + 0x82000000 0 0x30013000 0x13000 0 0xffed000>; + #interrupt-cells = <1>; + num-lanes = <1>; + ti,hwmods = "pcie2"; + phys = <&pcie2_phy>; + phy-names = "pcie-phy0"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 1>, + <0 0 0 2 &pcie2_intc 2>, + <0 0 0 3 &pcie2_intc 3>, + <0 0 0 4 &pcie2_intc 4>; + pcie2_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + cm_core_aon: cm_core_aon@4a005000 { compatible = "ti,dra7-cm-core-aon"; reg = <0x4a005000 0x2000>; @@ -155,10 +228,10 @@ sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; #dma-cells = <1>; #dma-channels = <32>; #dma-requests = <127>; @@ -167,7 +240,7 @@ gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; reg = <0x4ae10000 0x200>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -178,7 +251,7 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; reg = <0x48055000 0x200>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -189,7 +262,7 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; reg = <0x48057000 0x200>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -200,7 +273,7 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; reg = <0x48059000 0x200>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -211,7 +284,7 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; reg = <0x4805b000 0x200>; - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -222,7 +295,7 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; reg = <0x4805d000 0x200>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -233,7 +306,7 @@ gpio7: gpio@48051000 { compatible = "ti,omap4-gpio"; reg = <0x48051000 0x200>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio7"; gpio-controller; #gpio-cells = <2>; @@ -244,7 +317,7 @@ gpio8: gpio@48053000 { compatible = "ti,omap4-gpio"; reg = <0x48053000 0x200>; - interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "gpio8"; gpio-controller; #gpio-cells = <2>; @@ -255,7 +328,7 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; @@ -264,7 +337,7 @@ uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; @@ -273,7 +346,7 @@ uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; @@ -282,7 +355,7 @@ uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; @@ -291,7 +364,7 @@ uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; @@ -300,7 +373,7 @@ uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; @@ -309,6 +382,7 @@ uart7: serial@48420000 { compatible = "ti,omap4-uart"; reg = <0x48420000 0x100>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart7"; clock-frequency = <48000000>; status = "disabled"; @@ -317,6 +391,7 @@ uart8: serial@48422000 { compatible = "ti,omap4-uart"; reg = <0x48422000 0x100>; + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart8"; clock-frequency = <48000000>; status = "disabled"; @@ -325,6 +400,7 @@ uart9: serial@48424000 { compatible = "ti,omap4-uart"; reg = <0x48424000 0x100>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart9"; clock-frequency = <48000000>; status = "disabled"; @@ -333,15 +409,133 @@ uart10: serial@4ae2b000 { compatible = "ti,omap4-uart"; reg = <0x4ae2b000 0x100>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart10"; clock-frequency = <48000000>; status = "disabled"; }; + mailbox1: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + ti,hwmods = "mailbox1"; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + status = "disabled"; + }; + + mailbox2: mailbox@4883a000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4883a000 0x200>; + ti,hwmods = "mailbox2"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox3: mailbox@4883c000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4883c000 0x200>; + ti,hwmods = "mailbox3"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox4: mailbox@4883e000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4883e000 0x200>; + ti,hwmods = "mailbox4"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox5: mailbox@48840000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48840000 0x200>; + ti,hwmods = "mailbox5"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox6: mailbox@48842000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48842000 0x200>; + ti,hwmods = "mailbox6"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox7: mailbox@48844000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48844000 0x200>; + ti,hwmods = "mailbox7"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox8: mailbox@48846000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48846000 0x200>; + ti,hwmods = "mailbox8"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox9: mailbox@4885e000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4885e000 0x200>; + ti,hwmods = "mailbox9"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox10: mailbox@48860000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48860000 0x200>; + ti,hwmods = "mailbox10"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox11: mailbox@48862000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48862000 0x200>; + ti,hwmods = "mailbox11"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox12: mailbox@48864000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48864000 0x200>; + ti,hwmods = "mailbox12"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox13: mailbox@48802000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48802000 0x200>; + ti,hwmods = "mailbox13"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + timer1: timer@4ae18000 { compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer1"; ti,timer-alwon; }; @@ -349,28 +543,28 @@ timer2: timer@48032000 { compatible = "ti,omap5430-timer"; reg = <0x48032000 0x80>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer2"; }; timer3: timer@48034000 { compatible = "ti,omap5430-timer"; reg = <0x48034000 0x80>; - interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer3"; }; timer4: timer@48036000 { compatible = "ti,omap5430-timer"; reg = <0x48036000 0x80>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer4"; }; timer5: timer@48820000 { compatible = "ti,omap5430-timer"; reg = <0x48820000 0x80>; - interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer5"; ti,timer-dsp; }; @@ -378,7 +572,7 @@ timer6: timer@48822000 { compatible = "ti,omap5430-timer"; reg = <0x48822000 0x80>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer6"; ti,timer-dsp; ti,timer-pwm; @@ -387,7 +581,7 @@ timer7: timer@48824000 { compatible = "ti,omap5430-timer"; reg = <0x48824000 0x80>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer7"; ti,timer-dsp; }; @@ -395,7 +589,7 @@ timer8: timer@48826000 { compatible = "ti,omap5430-timer"; reg = <0x48826000 0x80>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer8"; ti,timer-dsp; ti,timer-pwm; @@ -404,21 +598,21 @@ timer9: timer@4803e000 { compatible = "ti,omap5430-timer"; reg = <0x4803e000 0x80>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer9"; }; timer10: timer@48086000 { compatible = "ti,omap5430-timer"; reg = <0x48086000 0x80>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer10"; }; timer11: timer@48088000 { compatible = "ti,omap5430-timer"; reg = <0x48088000 0x80>; - interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer11"; ti,timer-pwm; }; @@ -426,6 +620,7 @@ timer13: timer@48828000 { compatible = "ti,omap5430-timer"; reg = <0x48828000 0x80>; + interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer13"; status = "disabled"; }; @@ -433,6 +628,7 @@ timer14: timer@4882a000 { compatible = "ti,omap5430-timer"; reg = <0x4882a000 0x80>; + interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer14"; status = "disabled"; }; @@ -440,6 +636,7 @@ timer15: timer@4882c000 { compatible = "ti,omap5430-timer"; reg = <0x4882c000 0x80>; + interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer15"; status = "disabled"; }; @@ -447,6 +644,7 @@ timer16: timer@4882e000 { compatible = "ti,omap5430-timer"; reg = <0x4882e000 0x80>; + interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "timer16"; status = "disabled"; }; @@ -454,7 +652,7 @@ wdt2: wdt@4ae14000 { compatible = "ti,omap4-wdt"; reg = <0x4ae14000 0x80>; - interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "wd_timer2"; }; @@ -468,14 +666,14 @@ dmm@4e000000 { compatible = "ti,omap5-dmm"; reg = <0x4e000000 0x800>; - interrupts = <0 113 0x4>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "dmm"; }; i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; reg = <0x48070000 0x100>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -485,7 +683,7 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; reg = <0x48072000 0x100>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -495,7 +693,7 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; reg = <0x48060000 0x100>; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -505,7 +703,7 @@ i2c4: i2c@4807a000 { compatible = "ti,omap4-i2c"; reg = <0x4807a000 0x100>; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; @@ -515,7 +713,7 @@ i2c5: i2c@4807c000 { compatible = "ti,omap4-i2c"; reg = <0x4807c000 0x100>; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c5"; @@ -525,7 +723,7 @@ mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -538,7 +736,7 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; reg = <0x480b4000 0x400>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc2"; ti,needs-special-reset; dmas = <&sdma 47>, <&sdma 48>; @@ -549,7 +747,7 @@ mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; reg = <0x480ad000 0x400>; - interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc3"; ti,needs-special-reset; dmas = <&sdma 77>, <&sdma 78>; @@ -560,7 +758,7 @@ mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; reg = <0x480d1000 0x400>; - interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc4"; ti,needs-special-reset; dmas = <&sdma 57>, <&sdma 58>; @@ -703,7 +901,7 @@ mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; reg = <0x48098000 0x200>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; @@ -724,7 +922,7 @@ mcspi2: spi@4809a000 { compatible = "ti,omap4-mcspi"; reg = <0x4809a000 0x200>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; @@ -740,7 +938,7 @@ mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; reg = <0x480b8000 0x200>; - interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; @@ -753,7 +951,7 @@ mcspi4: spi@480ba000 { compatible = "ti,omap4-mcspi"; reg = <0x480ba000 0x200>; - interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; @@ -773,6 +971,7 @@ clocks = <&qspi_gfclk_div>; clock-names = "fck"; num-cs = <4>; + interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -803,18 +1002,76 @@ clock-names = "sysclk"; #phy-cells = <0>; }; + + pcie1_phy: pciephy@4a094000 { + compatible = "ti,phy-pipe3-pcie"; + reg = <0x4a094000 0x80>, /* phy_rx */ + <0x4a094400 0x64>; /* phy_tx */ + reg-names = "phy_rx", "phy_tx"; + ctrl-module = <&omap_control_pcie1phy>; + clocks = <&dpll_pcie_ref_ck>, + <&dpll_pcie_ref_m2ldo_ck>, + <&optfclk_pciephy1_32khz>, + <&optfclk_pciephy1_clk>, + <&optfclk_pciephy1_div_clk>, + <&optfclk_pciephy_div>; + clock-names = "dpll_ref", "dpll_ref_m2", + "wkupclk", "refclk", + "div-clk", "phy-div"; + #phy-cells = <0>; + id = <1>; + ti,hwmods = "pcie1-phy"; + }; + + pcie2_phy: pciephy@4a095000 { + compatible = "ti,phy-pipe3-pcie"; + reg = <0x4a095000 0x80>, /* phy_rx */ + <0x4a095400 0x64>; /* phy_tx */ + reg-names = "phy_rx", "phy_tx"; + ctrl-module = <&omap_control_pcie2phy>; + clocks = <&dpll_pcie_ref_ck>, + <&dpll_pcie_ref_m2ldo_ck>, + <&optfclk_pciephy2_32khz>, + <&optfclk_pciephy2_clk>, + <&optfclk_pciephy2_div_clk>, + <&optfclk_pciephy_div>; + clock-names = "dpll_ref", "dpll_ref_m2", + "wkupclk", "refclk", + "div-clk", "phy-div"; + #phy-cells = <0>; + ti,hwmods = "pcie2-phy"; + id = <2>; + status = "disabled"; + }; }; sata: sata@4a141100 { compatible = "snps,dwc-ahci"; reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; phys = <&sata_phy>; phy-names = "sata-phy"; clocks = <&sata_ref_clk>; ti,hwmods = "sata"; }; + omap_control_pcie1phy: control-phy@0x4a003c40 { + compatible = "ti,control-phy-pcie"; + reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; + reg-names = "power", "control_sma", "pcie_pcs"; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + }; + + omap_control_pcie2phy: control-pcie@0x4a003c44 { + compatible = "ti,control-phy-pcie"; + reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; + reg-names = "power", "control_sma", "pcie_pcs"; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + status = "disabled"; + }; + omap_control_usb2phy1: control-phy@4a002300 { compatible = "ti,control-phy-usb2"; reg = <0x4a002300 0x4>; @@ -885,7 +1142,7 @@ compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss1"; reg = <0x48880000 0x10000>; - interrupts = <0 77 4>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <1>; utmi-mode = <2>; @@ -893,7 +1150,7 @@ usb1: usb@48890000 { compatible = "snps,dwc3"; reg = <0x48890000 0x17000>; - interrupts = <0 76 4>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb2_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; tx-fifo-resize; @@ -906,7 +1163,7 @@ compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss2"; reg = <0x488c0000 0x10000>; - interrupts = <0 92 4>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <1>; utmi-mode = <2>; @@ -914,7 +1171,7 @@ usb2: usb@488d0000 { compatible = "snps,dwc3"; reg = <0x488d0000 0x17000>; - interrupts = <0 78 4>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb2_phy2>; phy-names = "usb2-phy"; tx-fifo-resize; @@ -928,7 +1185,7 @@ compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss3"; reg = <0x48900000 0x10000>; - /* interrupts = <0 TBD 4>; */ + interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <1>; utmi-mode = <2>; @@ -937,7 +1194,7 @@ usb3: usb@48910000 { compatible = "snps,dwc3"; reg = <0x48910000 0x17000>; - /* interrupts = <0 93 4>; */ + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; @@ -948,7 +1205,7 @@ compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss4"; reg = <0x48940000 0x10000>; - /* interrupts = <0 TBD 4>; */ + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <1>; utmi-mode = <2>; @@ -957,7 +1214,7 @@ usb4: usb@48950000 { compatible = "snps,dwc3"; reg = <0x48950000 0x17000>; - /* interrupts = <0 TBD 4>; */ + interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>; tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; @@ -967,7 +1224,7 @@ elm: elm@48078000 { compatible = "ti,am3352-elm"; reg = <0x48078000 0xfc0>; /* device IO registers */ - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "elm"; status = "disabled"; }; @@ -976,7 +1233,7 @@ compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; reg = <0x50000000 0x37c>; /* device IO registers */ - interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; gpmc,num-cs = <8>; gpmc,num-waitpins = <2>; #address-cells = <2>; @@ -994,6 +1251,17 @@ clock-names = "fck"; status = "disabled"; }; + + crossbar_mpu: crossbar@4a020000 { + compatible = "ti,irq-crossbar"; + reg = <0x4a002a48 0x130>; + ti,max-irqs = <160>; + ti,max-crossbar-sources = <MAX_SOURCES>; + ti,reg-size = <2>; + ti,irqs-reserved = <0 1 2 3 5 6 131 132>; + ti,irqs-skip = <10 133 139 140>; + ti,irqs-safe-map = <0>; + }; }; }; diff --git a/dts/src/arm/dra7xx-clocks.dtsi b/dts/src/arm/dra7xx-clocks.dtsi index dc7a292fe9..2c05b3f017 100644 --- a/dts/src/arm/dra7xx-clocks.dtsi +++ b/dts/src/arm/dra7xx-clocks.dtsi @@ -1154,7 +1154,7 @@ apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 { compatible = "ti,mux-clock"; - clocks = <&dpll_pcie_ref_ck>, <&pciesref_acs_clk_ck>; + clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>; #clock-cells = <0>; reg = <0x021c 0x4>; ti,bit-shift = <7>; @@ -1167,16 +1167,33 @@ reg = <0x021c>, <0x0220>; }; + optfclk_pciephy1_32khz: optfclk_pciephy1_32khz@4a0093b0 { + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + #clock-cells = <0>; + reg = <0x13b0>; + ti,bit-shift = <8>; + }; + + optfclk_pciephy2_32khz: optfclk_pciephy2_32khz@4a0093b8 { + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + #clock-cells = <0>; + reg = <0x13b8>; + ti,bit-shift = <8>; + }; + optfclk_pciephy_div: optfclk_pciephy_div@4a00821c { compatible = "ti,divider-clock"; clocks = <&apll_pcie_ck>; #clock-cells = <0>; reg = <0x021c>; + ti,dividers = <2>, <1>; ti,bit-shift = <8>; ti,max-div = <2>; }; - optfclk_pciephy_clk: optfclk_pciephy_clk@4a0093b0 { + optfclk_pciephy1_clk: optfclk_pciephy1_clk@4a0093b0 { compatible = "ti,gate-clock"; clocks = <&apll_pcie_ck>; #clock-cells = <0>; @@ -1184,7 +1201,15 @@ ti,bit-shift = <9>; }; - optfclk_pciephy_div_clk: optfclk_pciephy_div_clk@4a0093b0 { + optfclk_pciephy2_clk: optfclk_pciephy2_clk@4a0093b8 { + compatible = "ti,gate-clock"; + clocks = <&apll_pcie_ck>; + #clock-cells = <0>; + reg = <0x13b8>; + ti,bit-shift = <9>; + }; + + optfclk_pciephy1_div_clk: optfclk_pciephy1_div_clk@4a0093b0 { compatible = "ti,gate-clock"; clocks = <&optfclk_pciephy_div>; #clock-cells = <0>; @@ -1192,6 +1217,14 @@ ti,bit-shift = <10>; }; + optfclk_pciephy2_div_clk: optfclk_pciephy2_div_clk@4a0093b8 { + compatible = "ti,gate-clock"; + clocks = <&optfclk_pciephy_div>; + #clock-cells = <0>; + reg = <0x13b8>; + ti,bit-shift = <10>; + }; + apll_pcie_clkvcoldo: apll_pcie_clkvcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; diff --git a/dts/src/arm/emev2.dtsi b/dts/src/arm/emev2.dtsi index e37985fa10..00eeed3721 100644 --- a/dts/src/arm/emev2.dtsi +++ b/dts/src/arm/emev2.dtsi @@ -31,11 +31,13 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clock-frequency = <533000000>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clock-frequency = <533000000>; }; }; diff --git a/dts/src/arm/ethernut5.dts b/dts/src/arm/ethernut5.dts index 143b6d25bc..8f941c2db7 100644 --- a/dts/src/arm/ethernut5.dts +++ b/dts/src/arm/ethernut5.dts @@ -20,6 +20,16 @@ reg = <0x20000000 0x08000000>; }; + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; + ahb { apb { dbgu: serial@fffff200 { diff --git a/dts/src/arm/evk-pro3.dts b/dts/src/arm/evk-pro3.dts index 4d829685fd..f72969efe6 100644 --- a/dts/src/arm/evk-pro3.dts +++ b/dts/src/arm/evk-pro3.dts @@ -15,6 +15,12 @@ model = "Telit EVK-PRO3 for Telit GE863-PRO3"; compatible = "telit,evk-pro3", "atmel,at91sam9260", "atmel,at91sam9"; + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + }; + ahb { apb { macb0: ethernet@fffc4000 { diff --git a/dts/src/arm/exynos3250.dtsi b/dts/src/arm/exynos3250.dtsi index 3e678fa335..1d52de6370 100644 --- a/dts/src/arm/exynos3250.dtsi +++ b/dts/src/arm/exynos3250.dtsi @@ -39,6 +39,8 @@ i2c5 = &i2c_5; i2c6 = &i2c_6; i2c7 = &i2c_7; + serial0 = &serial_0; + serial1 = &serial_1; }; cpus { @@ -168,6 +170,15 @@ status = "disabled"; }; + tmu: tmu@100C0000 { + compatible = "samsung,exynos3250-tmu"; + reg = <0x100C0000 0x100>; + interrupts = <0 216 0>; + clocks = <&cmu CLK_TMU_APBIF>; + clock-names = "tmu_apbif"; + status = "disabled"; + }; + gic: interrupt-controller@10481000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; @@ -195,7 +206,6 @@ wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; - interrupt-parent = <&gic>; interrupts = <0 48 0>; }; }; @@ -234,7 +244,6 @@ compatible = "arm,amba-bus"; #address-cells = <1>; #size-cells = <1>; - interrupt-parent = <&gic>; ranges; pdma0: pdma@12680000 { @@ -261,10 +270,11 @@ }; adc: adc@126C0000 { - compatible = "samsung,exynos-adc-v3"; + compatible = "samsung,exynos3250-adc", + "samsung,exynos-adc-v2"; reg = <0x126C0000 0x100>, <0x10020718 0x4>; interrupts = <0 137 0>; - clock-names = "adc", "sclk_tsadc"; + clock-names = "adc", "sclk"; clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; #io-channel-cells = <1>; io-channel-ranges; @@ -277,6 +287,8 @@ interrupts = <0 109 0>; clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data &uart0_fctl>; status = "disabled"; }; @@ -286,6 +298,8 @@ interrupts = <0 110 0>; clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_data>; status = "disabled"; }; @@ -425,6 +439,19 @@ status = "disabled"; }; + i2s2: i2s@13970000 { + compatible = "samsung,s3c6410-i2s"; + reg = <0x13970000 0x100>; + interrupts = <0 126 0>; + clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0"; + dmas = <&pdma0 14>, <&pdma0 13>; + dma-names = "tx", "rx"; + pinctrl-0 = <&i2s2_bus>; + pinctrl-names = "default"; + status = "disabled"; + }; + pwm: pwm@139D0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x139D0000 0x1000>; diff --git a/dts/src/arm/exynos4.dtsi b/dts/src/arm/exynos4.dtsi index 17b22e9cc2..e0278ecbc8 100644 --- a/dts/src/arm/exynos4.dtsi +++ b/dts/src/arm/exynos4.dtsi @@ -44,6 +44,10 @@ fimc1 = &fimc_1; fimc2 = &fimc_2; fimc3 = &fimc_3; + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + serial3 = &serial_3; }; clock_audss: clock-controller@03810000 { @@ -123,6 +127,12 @@ reg = <0x10440000 0x1000>; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&combiner>; + interrupts = <2 2>, <3 2>; + }; + sys_reg: syscon@10010000 { compatible = "samsung,exynos4-sysreg", "syscon"; reg = <0x10010000 0x400>; @@ -322,6 +332,23 @@ clocks = <&clock CLK_USB_HOST>; clock-names = "usbhost"; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&exynos_usbphy 1>; + status = "disabled"; + }; + port@1 { + reg = <1>; + phys = <&exynos_usbphy 2>; + status = "disabled"; + }; + port@2 { + reg = <2>; + phys = <&exynos_usbphy 3>; + status = "disabled"; + }; }; ohci@12590000 { @@ -331,6 +358,13 @@ clocks = <&clock CLK_USB_HOST>; clock-names = "usbhost"; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&exynos_usbphy 1>; + status = "disabled"; + }; }; i2s1: i2s@13960000 { @@ -363,7 +397,7 @@ status = "disabled"; }; - serial@13800000 { + serial_0: serial@13800000 { compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x100>; interrupts = <0 52 0>; @@ -372,7 +406,7 @@ status = "disabled"; }; - serial@13810000 { + serial_1: serial@13810000 { compatible = "samsung,exynos4210-uart"; reg = <0x13810000 0x100>; interrupts = <0 53 0>; @@ -381,7 +415,7 @@ status = "disabled"; }; - serial@13820000 { + serial_2: serial@13820000 { compatible = "samsung,exynos4210-uart"; reg = <0x13820000 0x100>; interrupts = <0 54 0>; @@ -390,7 +424,7 @@ status = "disabled"; }; - serial@13830000 { + serial_3: serial@13830000 { compatible = "samsung,exynos4210-uart"; reg = <0x13830000 0x100>; interrupts = <0 55 0>; @@ -608,6 +642,7 @@ clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; samsung,power-domain = <&pd_lcd0>; + samsung,sysreg = <&sys_reg>; status = "disabled"; }; }; diff --git a/dts/src/arm/exynos4210-smdkv310.dts b/dts/src/arm/exynos4210-smdkv310.dts index 636d166847..676e6e0c8c 100644 --- a/dts/src/arm/exynos4210-smdkv310.dts +++ b/dts/src/arm/exynos4210-smdkv310.dts @@ -168,6 +168,7 @@ }; spi_2: spi@13940000 { + cs-gpios = <&gpc1 2 0>; status = "okay"; w25x80@0 { @@ -178,7 +179,6 @@ spi-max-frequency = <1000000>; controller-data { - cs-gpio = <&gpc1 2 0>; samsung,spi-feedback-delay = <0>; }; diff --git a/dts/src/arm/exynos4210.dtsi b/dts/src/arm/exynos4210.dtsi index ee3001f388..807bb5bf91 100644 --- a/dts/src/arm/exynos4210.dtsi +++ b/dts/src/arm/exynos4210.dtsi @@ -31,6 +31,16 @@ pinctrl2 = &pinctrl_2; }; + pmu_system_controller: system-controller@10020000 { + clock-names = "clkout0", "clkout1", "clkout2", "clkout3", + "clkout4", "clkout8", "clkout9"; + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, + <&clock CLK_XUSBXTI>; + #clock-cells = <1>; + }; + sysram@02020000 { compatible = "mmio-sram"; reg = <0x02020000 0x20000>; @@ -93,12 +103,6 @@ #clock-cells = <1>; }; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupt-parent = <&combiner>; - interrupts = <2 2>, <3 2>; - }; - pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos4210-pinctrl"; reg = <0x11400000 0x1000>; diff --git a/dts/src/arm/exynos4412-odroid-common.dtsi b/dts/src/arm/exynos4412-odroid-common.dtsi new file mode 100644 index 0000000000..6d6d23c83d --- /dev/null +++ b/dts/src/arm/exynos4412-odroid-common.dtsi @@ -0,0 +1,371 @@ +/* + * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards + * device tree source + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <dt-bindings/input/input.h> +#include "exynos4412.dtsi" + +/ { + firmware@0204F000 { + compatible = "samsung,secure-firmware"; + reg = <0x0204F000 0x1000>; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_power_key>; + + power_key { + interrupt-parent = <&gpx1>; + interrupts = <3 0>; + gpios = <&gpx1 3 1>; + linux,code = <KEY_POWER>; + label = "power key"; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + i2s0: i2s@03830000 { + pinctrl-0 = <&i2s0_bus>; + pinctrl-names = "default"; + status = "okay"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + clock-names = "iis", "i2s_opclk0"; + }; + + sound: sound { + compatible = "samsung,odroidx2-audio"; + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&max98090>; + }; + + mmc@12550000 { + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + vmmc-supply = <&ldo20_reg &buck8_reg>; + status = "okay"; + + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + watchdog@10060000 { + status = "okay"; + }; + + rtc@10070000 { + status = "okay"; + }; + + g2d@10800000 { + status = "okay"; + }; + + camera { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + fimc_0: fimc@11800000 { + status = "okay"; + }; + + fimc_1: fimc@11810000 { + status = "okay"; + }; + + fimc_2: fimc@11820000 { + status = "okay"; + }; + + fimc_3: fimc@11830000 { + status = "okay"; + }; + }; + + sdhci@12530000 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&ldo4_reg &ldo21_reg>; + cd-gpios = <&gpk2 2 0>; + cd-inverted; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; + + i2c@13860000 { + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + usb3503: usb3503@08 { + compatible = "smsc,usb3503"; + reg = <0x08>; + + intn-gpios = <&gpx3 0 0>; + connect-gpios = <&gpx3 4 0>; + reset-gpios = <&gpx3 5 0>; + initial-mode = <1>; + }; + + max77686: pmic@09 { + compatible = "maxim,max77686"; + reg = <0x09>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_M1_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDDQ_EXT_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDDQ_MMC2_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDDQ_MMC1_3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD10_XPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD18_ABB1_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD33_USB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDQ_C2C_W_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB0_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_HSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo20_reg: LDO20 { + regulator-name = "LDO20_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "LDO21_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo25_reg: LDO25 { + regulator-name = "VDDQ_LCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-microvolt-offset = <50000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDDQ_CKEM1_2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "BUCK6_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "BUCK7_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "BUCK8_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; + }; + }; + + i2c@13870000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + status = "okay"; + max98090: max98090@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpx0>; + interrupts = <0 0>; + }; + }; + + exynos-usbphy@125B0000 { + status = "okay"; + }; + + hsotg@12480000 { + status = "okay"; + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + }; + + ehci: ehci@12580000 { + status = "okay"; + }; +}; + +&pinctrl_1 { + gpio_power_key: power_key { + samsung,pins = "gpx1-3"; + samsung,pin-pud = <0>; + }; +}; diff --git a/dts/src/arm/exynos4412-odroidu3.dts b/dts/src/arm/exynos4412-odroidu3.dts new file mode 100644 index 0000000000..c8a64be55d --- /dev/null +++ b/dts/src/arm/exynos4412-odroidu3.dts @@ -0,0 +1,61 @@ +/* + * Hardkernel's Exynos4412 based ODROID-U3 board device tree source + * + * Copyright (c) 2014 Marek Szyprowski <m.szyprowski@samsung.com> + * + * Device tree source file for Hardkernel's ODROID-U3 board which is based + * on Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos4412-odroid-common.dtsi" + +/ { + model = "Hardkernel ODROID-U3 board based on Exynos4412"; + compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4"; + + memory { + reg = <0x40000000 0x7FF00000>; + }; + + leds { + compatible = "gpio-leds"; + led1 { + label = "led1:heart"; + gpios = <&gpc1 0 1>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&usb3503 { + clock-names = "refclk"; + clocks = <&pmu_system_controller 0>; + refclk-frequency = <24000000>; +}; + +&ehci { + port@1 { + status = "okay"; + }; + port@2 { + status = "okay"; + }; +}; + +&sound { + compatible = "samsung,odroidu3-audio"; + samsung,model = "Odroid-U3"; + samsung,audio-routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Headphone Jack", "MICBIAS", + "IN1", "Headphone Jack", + "Speakers", "SPKL", + "Speakers", "SPKR"; +}; diff --git a/dts/src/arm/exynos4412-odroidx.dts b/dts/src/arm/exynos4412-odroidx.dts index 31db28a4bb..cb1cfe7239 100644 --- a/dts/src/arm/exynos4412-odroidx.dts +++ b/dts/src/arm/exynos4412-odroidx.dts @@ -3,8 +3,8 @@ * * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com> * - * Device tree source file for Hardkernel's ODROID-X board which is based on - * Samsung's Exynos4412 SoC. + * Device tree source file for Hardkernel's ODROID-X board which is based + * on Samsung's Exynos4412 SoC. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,14 +12,14 @@ */ /dts-v1/; -#include "exynos4412.dtsi" +#include "exynos4412-odroid-common.dtsi" / { model = "Hardkernel ODROID-X board based on Exynos4412"; compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4"; memory { - reg = <0x40000000 0x40000000>; + reg = <0x40000000 0x3FF00000>; }; leds { @@ -38,23 +38,25 @@ }; }; - mmc@12550000 { - pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; - pinctrl-names = "default"; - vmmc-supply = <&ldo20_reg &buck8_reg>; + serial@13820000 { status = "okay"; + }; - num-slots = <1>; - supports-highspeed; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; + serial@13830000 { + status = "okay"; + }; - slot@0 { - reg = <0>; - bus-width = <8>; + gpio_keys { + pinctrl-0 = <&gpio_power_key &gpio_home_key>; + + home_key { + interrupt-parent = <&gpx2>; + interrupts = <2 0>; + gpios = <&gpx2 2 0>; + linux,code = <KEY_HOME>; + label = "home key"; + debounce-interval = <10>; + gpio-key,wakeup; }; }; @@ -65,242 +67,19 @@ regulator-max-microvolt = <3300000>; gpio = <&gpa1 1 1>; enable-active-high; - regulator-boot-on; - }; - - rtc@10070000 { - status = "okay"; - }; - - sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - pinctrl-names = "default"; - vmmc-supply = <&ldo4_reg &ldo21_reg>; - status = "okay"; - }; - - serial@13800000 { - status = "okay"; - }; - - serial@13810000 { - status = "okay"; - }; - - serial@13820000 { - status = "okay"; + regulator-always-on; }; +}; - serial@13830000 { +&ehci { + port@1 { status = "okay"; }; +}; - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <0>; - }; - - xusbxti { - compatible = "samsung,clock-xusbxti"; - clock-frequency = <24000000>; - }; - }; - - i2c@13860000 { - pinctrl-0 = <&i2c0_bus>; - pinctrl-names = "default"; - status = "okay"; - - max77686: pmic@09 { - compatible = "maxim,max77686"; - reg = <0x09>; - #clock-cells = <1>; - - voltage-regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDDQ_M1_2_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "VDDQ_EXT_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "VDDQ_MMC2_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo5_reg: LDO5 { - regulator-name = "VDDQ_MMC1_3_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "VDD10_MPLL_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD10_XPLL_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD18_ABB1_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "VDD33_USB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo13_reg: LDO13 { - regulator-name = "VDDQ_C2C_W_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo14_reg: LDO14 { - regulator-name = "VDD18_ABB0_2_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo15_reg: LDO15 { - regulator-name = "VDD10_HSIC_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo16_reg: LDO16 { - regulator-name = "VDD18_HSIC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo20_reg: LDO20 { - regulator-name = "LDO20_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - }; - - ldo21_reg: LDO21 { - regulator-name = "LDO21_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo25_reg: LDO25 { - regulator-name = "VDDQ_LCD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-microvolt-offset = <50000>; - }; - - buck5_reg: BUCK5 { - regulator-name = "VDDQ_CKEM1_2_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "BUCK6_1.35V"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "BUCK7_2.0V"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "BUCK8_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - }; - }; +&pinctrl_1 { + gpio_home_key: home_key { + samsung,pins = "gpx2-2"; + samsung,pin-pud = <0>; }; }; diff --git a/dts/src/arm/exynos4412-odroidx2.dts b/dts/src/arm/exynos4412-odroidx2.dts new file mode 100644 index 0000000000..96b43f4497 --- /dev/null +++ b/dts/src/arm/exynos4412-odroidx2.dts @@ -0,0 +1,32 @@ +/* + * Hardkernel's Exynos4412 based ODROID-X2 board device tree source + * + * Copyright (c) 2012 Dongjin Kim <tobetter@gmail.com> + * + * Device tree source file for Hardkernel's ODROID-X2 board which is based + * on Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "exynos4412-odroidx.dts" + +/ { + model = "Hardkernel ODROID-X2 board based on Exynos4412"; + compatible = "hardkernel,odroid-x2", "samsung,exynos4412", "samsung,exynos4"; + + memory { + reg = <0x40000000 0x7FF00000>; + }; +}; + +&sound { + samsung,model = "Odroid-X2"; + samsung,audio-routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "IN1", "Mic Jack", + "Mic Jack", "MICBIAS"; +}; diff --git a/dts/src/arm/exynos4412-trats2.dts b/dts/src/arm/exynos4412-trats2.dts index 77878447b3..11967f4561 100644 --- a/dts/src/arm/exynos4412-trats2.dts +++ b/dts/src/arm/exynos4412-trats2.dts @@ -589,6 +589,7 @@ spi_1: spi@13930000 { pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; + cs-gpios = <&gpb 5 0>; status = "okay"; s5c73m3_spi: s5c73m3 { @@ -596,7 +597,6 @@ spi-max-frequency = <50000000>; reg = <0>; controller-data { - cs-gpio = <&gpb 5 0>; samsung,spi-feedback-delay = <2>; }; }; diff --git a/dts/src/arm/exynos4412.dtsi b/dts/src/arm/exynos4412.dtsi index c42a3e196c..d8bc059e17 100644 --- a/dts/src/arm/exynos4412.dtsi +++ b/dts/src/arm/exynos4412.dtsi @@ -26,6 +26,10 @@ samsung,combiner-nr = <20>; }; + pmu { + interrupts = <2 2>, <3 2>, <18 2>, <19 2>; + }; + gic: interrupt-controller@10490000 { cpu-offset = <0x4000>; }; diff --git a/dts/src/arm/exynos4x12.dtsi b/dts/src/arm/exynos4x12.dtsi index c5a943df1c..861bb919f6 100644 --- a/dts/src/arm/exynos4x12.dtsi +++ b/dts/src/arm/exynos4x12.dtsi @@ -31,12 +31,6 @@ mshc0 = &mshc_0; }; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupt-parent = <&combiner>; - interrupts = <2 2>, <3 2>, <18 2>, <19 2>; - }; - sysram@02020000 { compatible = "mmio-sram"; reg = <0x02020000 0x40000>; @@ -139,6 +133,13 @@ pmu_system_controller: system-controller@10020000 { compatible = "samsung,exynos4212-pmu", "syscon"; + clock-names = "clkout0", "clkout1", "clkout2", "clkout3", + "clkout4", "clkout8", "clkout9"; + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, + <&clock CLK_XUSBXTI>; + #clock-cells = <1>; }; g2d@10800000 { diff --git a/dts/src/arm/exynos5.dtsi b/dts/src/arm/exynos5.dtsi index 79d0608d6d..a0cc0b6f8f 100644 --- a/dts/src/arm/exynos5.dtsi +++ b/dts/src/arm/exynos5.dtsi @@ -18,6 +18,13 @@ / { interrupt-parent = <&gic>; + aliases { + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + serial3 = &serial_3; + }; + chipid@10000000 { compatible = "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; @@ -50,25 +57,25 @@ interrupts = <1 9 0xf04>; }; - serial@12C00000 { + serial_0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; interrupts = <0 51 0>; }; - serial@12C10000 { + serial_1: serial@12C10000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C10000 0x100>; interrupts = <0 52 0>; }; - serial@12C20000 { + serial_2: serial@12C20000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C20000 0x100>; interrupts = <0 53 0>; }; - serial@12C30000 { + serial_3: serial@12C30000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C30000 0x100>; interrupts = <0 54 0>; @@ -87,6 +94,7 @@ reg = <0x14400000 0x40000>; interrupt-names = "fifo", "vsync", "lcd_sys"; interrupts = <18 4>, <18 5>, <18 6>; + samsung,sysreg = <&sysreg_system_controller>; status = "disabled"; }; diff --git a/dts/src/arm/exynos5250-cros-common.dtsi b/dts/src/arm/exynos5250-cros-common.dtsi index 89ac90f59e..e603e9c701 100644 --- a/dts/src/arm/exynos5250-cros-common.dtsi +++ b/dts/src/arm/exynos5250-cros-common.dtsi @@ -27,177 +27,18 @@ i2c2_bus: i2c2-bus { samsung,pin-pud = <0>; }; - - max77686_irq: max77686-irq { - samsung,pins = "gpx3-2"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; }; i2c@12C60000 { status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - - max77686@09 { - compatible = "maxim,max77686"; - interrupt-parent = <&gpx3>; - interrupts = <2 0>; - pinctrl-names = "default"; - pinctrl-0 = <&max77686_irq>; - wakeup-source; - reg = <0x09>; - #clock-cells = <1>; - - voltage-regulators { - ldo1_reg: LDO1 { - regulator-name = "P1.0V_LDO_OUT1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "P1.8V_LDO_OUT2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "P1.8V_LDO_OUT3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "P1.1V_LDO_OUT7"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "P1.0V_LDO_OUT8"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "P1.8V_LDO_OUT10"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "P3.0V_LDO_OUT12"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo14_reg: LDO14 { - regulator-name = "P1.8V_LDO_OUT14"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo15_reg: LDO15 { - regulator-name = "P1.0V_LDO_OUT15"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo16_reg: LDO16 { - regulator-name = "P1.8V_LDO_OUT16"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck5_reg: BUCK5 { - regulator-name = "P1.8V_BUCK_OUT5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "P1.35V_BUCK_OUT6"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "P2.0V_BUCK_OUT7"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "P2.85V_BUCK_OUT8"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-always-on; - }; - }; - }; }; i2c@12C70000 { status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - - trackpad { - reg = <0x67>; - compatible = "cypress,cyapa"; - interrupts = <2 0>; - interrupt-parent = <&gpx1>; - wakeup-source; - }; }; i2c@12C80000 { diff --git a/dts/src/arm/exynos5250-smdk5250.dts b/dts/src/arm/exynos5250-smdk5250.dts index a794a705d4..b4b35adae5 100644 --- a/dts/src/arm/exynos5250-smdk5250.dts +++ b/dts/src/arm/exynos5250-smdk5250.dts @@ -44,6 +44,8 @@ max77686@09 { compatible = "maxim,max77686"; reg = <0x09>; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; voltage-regulators { ldo1_reg: LDO1 { @@ -316,6 +318,7 @@ }; spi_1: spi@12d30000 { + cs-gpios = <&gpa2 5 0>; status = "okay"; w25q80bw@0 { @@ -326,7 +329,6 @@ spi-max-frequency = <1000000>; controller-data { - cs-gpio = <&gpa2 5 0>; samsung,spi-feedback-delay = <0>; }; diff --git a/dts/src/arm/exynos5250-snow.dts b/dts/src/arm/exynos5250-snow.dts index 079fdf9e3f..f2b8c41165 100644 --- a/dts/src/arm/exynos5250-snow.dts +++ b/dts/src/arm/exynos5250-snow.dts @@ -137,7 +137,7 @@ sbs,poll-retry-count = <1>; }; - ec: embedded-controller { + cros_ec: embedded-controller { compatible = "google,cros-ec-i2c"; reg = <0x1e>; interrupts = <6 0>; @@ -145,95 +145,6 @@ pinctrl-names = "default"; pinctrl-0 = <&ec_irq>; wakeup-source; - - keyboard-controller { - compatible = "google,cros-ec-keyb"; - keypad,num-rows = <8>; - keypad,num-columns = <13>; - google,needs-ghost-filter; - linux,keymap = <0x0001007d /* L_META */ - 0x0002003b /* F1 */ - 0x00030030 /* B */ - 0x00040044 /* F10 */ - 0x00060031 /* N */ - 0x0008000d /* = */ - 0x000a0064 /* R_ALT */ - - 0x01010001 /* ESC */ - 0x0102003e /* F4 */ - 0x01030022 /* G */ - 0x01040041 /* F7 */ - 0x01060023 /* H */ - 0x01080028 /* ' */ - 0x01090043 /* F9 */ - 0x010b000e /* BKSPACE */ - - 0x0200001d /* L_CTRL */ - 0x0201000f /* TAB */ - 0x0202003d /* F3 */ - 0x02030014 /* T */ - 0x02040040 /* F6 */ - 0x0205001b /* ] */ - 0x02060015 /* Y */ - 0x02070056 /* 102ND */ - 0x0208001a /* [ */ - 0x02090042 /* F8 */ - - 0x03010029 /* GRAVE */ - 0x0302003c /* F2 */ - 0x03030006 /* 5 */ - 0x0304003f /* F5 */ - 0x03060007 /* 6 */ - 0x0308000c /* - */ - 0x030b002b /* \ */ - - 0x04000061 /* R_CTRL */ - 0x0401001e /* A */ - 0x04020020 /* D */ - 0x04030021 /* F */ - 0x0404001f /* S */ - 0x04050025 /* K */ - 0x04060024 /* J */ - 0x04080027 /* ; */ - 0x04090026 /* L */ - 0x040a002b /* \ */ - 0x040b001c /* ENTER */ - - 0x0501002c /* Z */ - 0x0502002e /* C */ - 0x0503002f /* V */ - 0x0504002d /* X */ - 0x05050033 /* , */ - 0x05060032 /* M */ - 0x0507002a /* L_SHIFT */ - 0x05080035 /* / */ - 0x05090034 /* . */ - 0x050B0039 /* SPACE */ - - 0x06010002 /* 1 */ - 0x06020004 /* 3 */ - 0x06030005 /* 4 */ - 0x06040003 /* 2 */ - 0x06050009 /* 8 */ - 0x06060008 /* 7 */ - 0x0608000b /* 0 */ - 0x0609000a /* 9 */ - 0x060a0038 /* L_ALT */ - 0x060b006c /* DOWN */ - 0x060c006a /* RIGHT */ - - 0x07010010 /* Q */ - 0x07020012 /* E */ - 0x07030013 /* R */ - 0x07040011 /* W */ - 0x07050017 /* I */ - 0x07060016 /* U */ - 0x07070036 /* R_SHIFT */ - 0x07080019 /* P */ - 0x07090018 /* O */ - 0x070b0067 /* UP */ - 0x070c0069>; /* LEFT */ - }; }; power-regulator { @@ -351,6 +262,7 @@ sound { compatible = "google,snow-audio-max98095"; + samsung,model = "Snow-I2S-MAX98095"; samsung,i2s-controller = <&i2s0>; samsung,audio-codec = <&max98095>; }; @@ -431,3 +343,170 @@ }; }; }; + +&i2c_0 { + max77686@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + wakeup-source; + reg = <0x09>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "P1.0V_LDO_OUT1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "P1.8V_LDO_OUT2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "P1.8V_LDO_OUT3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "P1.35V_BUCK_OUT6"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "P2.0V_BUCK_OUT7"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "P2.85V_BUCK_OUT8"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c_1 { + trackpad { + reg = <0x67>; + compatible = "cypress,cyapa"; + interrupts = <2 0>; + interrupt-parent = <&gpx1>; + wakeup-source; + }; +}; + +&pinctrl_0 { + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +#include "cros-ec-keyboard.dtsi" diff --git a/dts/src/arm/exynos5250.dtsi b/dts/src/arm/exynos5250.dtsi index 834fb5a530..492e1eff37 100644 --- a/dts/src/arm/exynos5250.dtsi +++ b/dts/src/arm/exynos5250.dtsi @@ -191,6 +191,9 @@ pmu_system_controller: system-controller@10040000 { compatible = "samsung,exynos5250-pmu", "syscon"; reg = <0x10040000 0x5000>; + clock-names = "clkout16"; + clocks = <&clock CLK_FIN_PLL>; + #clock-cells = <1>; }; sysreg_system_controller: syscon@10050000 { diff --git a/dts/src/arm/exynos5260.dtsi b/dts/src/arm/exynos5260.dtsi index 5398a60207..36da38e290 100644 --- a/dts/src/arm/exynos5260.dtsi +++ b/dts/src/arm/exynos5260.dtsi @@ -21,6 +21,10 @@ pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; }; cpus { @@ -227,6 +231,11 @@ interrupts = <0 243 0>; }; + pmu_system_controller: system-controller@10D50000 { + compatible = "samsung,exynos5260-pmu", "syscon"; + reg = <0x10D50000 0x10000>; + }; + uart0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; diff --git a/dts/src/arm/exynos5410.dtsi b/dts/src/arm/exynos5410.dtsi index 3839c26f46..731eefd23f 100644 --- a/dts/src/arm/exynos5410.dtsi +++ b/dts/src/arm/exynos5410.dtsi @@ -20,6 +20,12 @@ compatible = "samsung,exynos5410", "samsung,exynos5"; interrupt-parent = <&gic>; + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -28,24 +34,28 @@ device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x0>; + clock-frequency = <1600000000>; }; CPU1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x1>; + clock-frequency = <1600000000>; }; CPU2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x2>; + clock-frequency = <1600000000>; }; CPU3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x3>; + clock-frequency = <1600000000>; }; }; @@ -87,6 +97,11 @@ reg = <0x10000000 0x100>; }; + pmu_system_controller: system-controller@10040000 { + compatible = "samsung,exynos5410-pmu", "syscon"; + reg = <0x10040000 0x5000>; + }; + mct: mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0xB00>; diff --git a/dts/src/arm/exynos5420-peach-pit.dts b/dts/src/arm/exynos5420-peach-pit.dts index 1c5b8f9f4a..228a6b1e0a 100644 --- a/dts/src/arm/exynos5420-peach-pit.dts +++ b/dts/src/arm/exynos5420-peach-pit.dts @@ -25,8 +25,18 @@ "google,pit", "google,peach","samsung,exynos5420", "samsung,exynos5"; - memory { - reg = <0x20000000 0x80000000>; + aliases { + /* Assign 20 so we don't get confused w/ builtin ones */ + i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel"; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; }; fixed-rate-clocks { @@ -50,18 +60,14 @@ }; }; - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 1000000 0>; - brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; - default-brightness-level = <7>; - pinctrl-0 = <&pwm0_out>; - pinctrl-names = "default"; + memory { + reg = <0x20000000 0x80000000>; }; sound { compatible = "google,snow-audio-max98090"; + samsung,model = "Peach-Pit-I2S-MAX98090"; samsung,i2s-controller = <&i2s0>; samsung,audio-codec = <&max98090>; }; @@ -87,66 +93,92 @@ pinctrl-0 = <&usb301_vbus_en>; enable-active-high; }; -}; -&pinctrl_0 { - max98090_irq: max98090-irq { - samsung,pins = "gpx0-2"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + vbat: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "vbat-supply"; + regulator-boot-on; + regulator-always-on; }; +}; - tpm_irq: tpm-irq { - samsung,pins = "gpx1-0"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd_gpio>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x06>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx2 6 0>; - power_key_irq: power-key-irq { - samsung,pins = "gpx1-2"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; + display-timings { + native-mode = <&timing1>; - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; + timing1: timing@1 { + clock-frequency = <70589280>; + hactive = <1366>; + vactive = <768>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <32>; + vback-porch = <10>; + vfront-porch = <12>; + vsync-len = <6>; + }; }; +}; - dp_hpd_gpio: dp_hpd_gpio { - samsung,pins = "gpx2-6"; - samsung,pin-function = <0>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; +&fimd { + status = "okay"; + samsung,invert-vclk; }; -&pinctrl_3 { - usb300_vbus_en: usb300-vbus-en { - samsung,pins = "gph0-0"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + ddc = <&i2c_2>; +}; + +&hsi2c_7 { + status = "okay"; + + max98090: codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupts = <2 0>; + interrupt-parent = <&gpx0>; + pinctrl-names = "default"; + pinctrl-0 = <&max98090_irq>; }; +}; - usb301_vbus_en: usb301-vbus-en { - samsung,pins = "gph0-1"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; +&hsi2c_9 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + + /* Unused irq; but still need to configure the pins */ + pinctrl-names = "default"; + pinctrl-0 = <&tpm_irq>; }; }; -&rtc { +&i2c_2 { status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; }; -&uart_3 { +&i2s0 { status = "okay"; }; @@ -189,46 +221,210 @@ }; }; -&hsi2c_7 { - status = "okay"; - max98090: codec@10 { - compatible = "maxim,max98090"; - reg = <0x10>; - interrupts = <2 0>; - interrupt-parent = <&gpx0>; - pinctrl-names = "default"; - pinctrl-0 = <&max98090_irq>; +&pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&mask_tpm_reset>; + + max98090_irq: max98090-irq { + samsung,pins = "gpx0-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + /* We need GPX0_6 to be low at sleep time; just keep it low always */ + mask_tpm_reset: mask-tpm-reset { + samsung,pins = "gpx0-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + samsung,pin-val = <0>; + }; + + tpm_irq: tpm-irq { + samsung,pins = "gpx1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ec_irq: ec-irq { + samsung,pins = "gpx1-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + tps65090_irq: tps65090-irq { + samsung,pins = "gpx2-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + dp_hpd_gpio: dp_hpd_gpio { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; }; }; -&hsi2c_9 { - status = "okay"; - clock-frequency = <400000>; +&pinctrl_3 { + /* Drive SPI lines at x2 for better integrity */ + spi2-bus { + samsung,pin-drv = <2>; + }; - tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; + /* Drive SPI chip select at x2 for better integrity */ + ec_spi_cs: ec-spi-cs { + samsung,pins = "gpb1-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; - /* Unused irq; but still need to configure the pins */ - pinctrl-names = "default"; - pinctrl-0 = <&tpm_irq>; + usb300_vbus_en: usb300-vbus-en { + samsung,pins = "gph0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb301_vbus_en: usb301-vbus-en { + samsung,pins = "gph0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; }; -&i2c_2 { +&rtc { status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - samsung,i2c-slave-addr = <0x50>; }; -&hdmi { +&spi_2 { + status = "okay"; + num-cs = <1>; + samsung,spi-src-clk = <0>; + cs-gpios = <&gpb1 2 0>; + + cros_ec: cros-ec@0 { + compatible = "google,cros-ec-spi"; + interrupt-parent = <&gpx1>; + interrupts = <5 0>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_spi_cs &ec_irq>; + reg = <0>; + spi-max-frequency = <3125000>; + + controller-data { + samsung,spi-feedback-delay = <1>; + }; + + i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + google,remote-bus = <0>; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,poll-retry-count = <1>; + sbs,i2c-retry-count = <2>; + }; + + power-regulator@48 { + compatible = "ti,tps65090"; + reg = <0x48>; + + /* + * Config irq to disable internal pulls + * even though we run in polling mode. + */ + pinctrl-names = "default"; + pinctrl-0 = <&tps65090_irq>; + + vsys1-supply = <&vbat>; + vsys2-supply = <&vbat>; + vsys3-supply = <&vbat>; + infet1-supply = <&vbat>; + infet2-supply = <&vbat>; + infet3-supply = <&vbat>; + infet4-supply = <&vbat>; + infet5-supply = <&vbat>; + infet6-supply = <&vbat>; + infet7-supply = <&vbat>; + vsys-l1-supply = <&vbat>; + vsys-l2-supply = <&vbat>; + + regulators { + tps65090_dcdc1: dcdc1 { + ti,enable-ext-control; + }; + tps65090_dcdc2: dcdc2 { + ti,enable-ext-control; + }; + tps65090_dcdc3: dcdc3 { + ti,enable-ext-control; + }; + tps65090_fet1: fet1 { + regulator-name = "vcd_led"; + }; + tps65090_fet2: fet2 { + regulator-name = "video_mid"; + regulator-always-on; + }; + tps65090_fet3: fet3 { + regulator-name = "wwan_r"; + regulator-always-on; + }; + tps65090_fet4: fet4 { + regulator-name = "sdcard"; + regulator-always-on; + }; + tps65090_fet5: fet5 { + regulator-name = "camout"; + }; + tps65090_fet6: fet6 { + regulator-name = "lcd_vdd"; + }; + tps65090_fet7: fet7 { + regulator-name = "video_mid_1a"; + regulator-always-on; + }; + tps65090_ldo1: ldo1 { + }; + tps65090_ldo2: ldo2 { + }; + }; + + charger { + compatible = "ti,tps65090-charger"; + }; + }; + }; + }; +}; + +&uart_3 { status = "okay"; - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - ddc = <&i2c_2>; }; &usbdrd_phy0 { @@ -248,40 +444,4 @@ timeout-sec = <32>; }; -&i2s0 { - status = "okay"; -}; - -&fimd { - status = "okay"; - samsung,invert-vclk; -}; - -&dp { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd_gpio>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x06>; - samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx2 6 0>; - - display-timings { - native-mode = <&timing1>; - - timing1: timing@1 { - clock-frequency = <70589280>; - hactive = <1366>; - vactive = <768>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <32>; - vback-porch = <10>; - vfront-porch = <12>; - vsync-len = <6>; - }; - }; -}; +#include "cros-ec-keyboard.dtsi" diff --git a/dts/src/arm/exynos5420.dtsi b/dts/src/arm/exynos5420.dtsi index 15957227ff..bfe056d914 100644 --- a/dts/src/arm/exynos5420.dtsi +++ b/dts/src/arm/exynos5420.dtsi @@ -265,11 +265,6 @@ clock-names = "oscclk", "pclk0", "clk0"; }; - disp_pd: power-domain@100440C0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x100440C0 0x20>; - }; - msc_pd: power-domain@10044120 { compatible = "samsung,exynos4210-pd"; reg = <0x10044120 0x20>; @@ -520,8 +515,26 @@ phy-names = "dp"; }; + mipi_phy: video-phy@10040714 { + compatible = "samsung,s5pv210-mipi-video-phy"; + reg = <0x10040714 12>; + #phy-cells = <1>; + }; + + dsi@14500000 { + compatible = "samsung,exynos5410-mipi-dsi"; + reg = <0x14500000 0x10000>; + interrupts = <0 82 0>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>; + clock-names = "bus_clk", "pll_clk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + fimd: fimd@14400000 { - samsung,power-domain = <&disp_pd>; clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; }; @@ -727,6 +740,9 @@ pmu_system_controller: system-controller@10040000 { compatible = "samsung,exynos5420-pmu", "syscon"; reg = <0x10040000 0x5000>; + clock-names = "clkout16"; + clocks = <&clock CLK_FIN_PLL>; + #clock-cells = <1>; }; sysreg_system_controller: syscon@10050000 { diff --git a/dts/src/arm/exynos5440.dtsi b/dts/src/arm/exynos5440.dtsi index ae3a17c791..8f3373cd7b 100644 --- a/dts/src/arm/exynos5440.dtsi +++ b/dts/src/arm/exynos5440.dtsi @@ -18,6 +18,8 @@ interrupt-parent = <&gic>; aliases { + serial0 = &serial_0; + serial1 = &serial_1; spi0 = &spi_0; tmuctrl0 = &tmuctrl_0; tmuctrl1 = &tmuctrl_1; @@ -102,7 +104,7 @@ >; }; - serial@B0000 { + serial_0: serial@B0000 { compatible = "samsung,exynos4210-uart"; reg = <0xB0000 0x1000>; interrupts = <0 2 0>; @@ -110,7 +112,7 @@ clock-names = "uart", "clk_uart_baud0"; }; - serial@C0000 { + serial_1: serial@C0000 { compatible = "samsung,exynos4210-uart"; reg = <0xC0000 0x1000>; interrupts = <0 3 0>; diff --git a/dts/src/arm/exynos5800-peach-pi.dts b/dts/src/arm/exynos5800-peach-pi.dts index f3af2079a0..f3ee48bbe0 100644 --- a/dts/src/arm/exynos5800-peach-pi.dts +++ b/dts/src/arm/exynos5800-peach-pi.dts @@ -23,8 +23,18 @@ "google,pi", "google,peach", "samsung,exynos5800", "samsung,exynos5"; - memory { - reg = <0x20000000 0x80000000>; + aliases { + /* Assign 20 so we don't get confused w/ builtin ones */ + i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel"; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; }; fixed-rate-clocks { @@ -48,13 +58,16 @@ }; }; - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 1000000 0>; - brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; - default-brightness-level = <7>; - pinctrl-0 = <&pwm0_out>; - pinctrl-names = "default"; + memory { + reg = <0x20000000 0x80000000>; + }; + + sound { + compatible = "google,snow-audio-max98091"; + + samsung,model = "Peach-Pi-I2S-MAX98091"; + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&max98091>; }; usb300_vbus_reg: regulator-usb300 { @@ -78,59 +91,92 @@ pinctrl-0 = <&usb301_vbus_en>; enable-active-high; }; -}; -&pinctrl_0 { - tpm_irq: tpm-irq { - samsung,pins = "gpx1-0"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + vbat: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "vbat-supply"; + regulator-boot-on; + regulator-always-on; }; +}; - power_key_irq: power-key-irq { - samsung,pins = "gpx1-2"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd_gpio>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx2 6 0>; - dp_hpd_gpio: dp_hpd_gpio { - samsung,pins = "gpx2-6"; - samsung,pin-function = <0>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; + display-timings { + native-mode = <&timing1>; - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; + timing1: timing@1 { + clock-frequency = <150660000>; + hactive = <1920>; + vactive = <1080>; + hfront-porch = <60>; + hback-porch = <172>; + hsync-len = <80>; + vback-porch = <25>; + vfront-porch = <10>; + vsync-len = <10>; + }; }; }; -&pinctrl_3 { - usb300_vbus_en: usb300-vbus-en { - samsung,pins = "gph0-0"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + ddc = <&i2c_2>; +}; + +&hsi2c_7 { + status = "okay"; + + max98091: codec@10 { + compatible = "maxim,max98091"; + reg = <0x10>; + interrupts = <2 0>; + interrupt-parent = <&gpx0>; + pinctrl-names = "default"; + pinctrl-0 = <&max98091_irq>; }; +}; - usb301_vbus_en: usb301-vbus-en { - samsung,pins = "gph0-1"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; +&hsi2c_9 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + + /* Unused irq; but still need to configure the pins */ + pinctrl-names = "default"; + pinctrl-0 = <&tpm_irq>; }; }; -&rtc { +&i2c_2 { status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; }; -&uart_3 { +&i2s0 { status = "okay"; }; @@ -173,66 +219,210 @@ }; }; -&dp { - status = "okay"; + +&pinctrl_0 { pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd_gpio>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx2 6 0>; + pinctrl-0 = <&mask_tpm_reset>; - display-timings { - native-mode = <&timing1>; + max98091_irq: max98091-irq { + samsung,pins = "gpx0-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; - timing1: timing@1 { - clock-frequency = <150660000>; - hactive = <1920>; - vactive = <1080>; - hfront-porch = <60>; - hback-porch = <172>; - hsync-len = <80>; - vback-porch = <25>; - vfront-porch = <10>; - vsync-len = <10>; - }; + /* We need GPX0_6 to be low at sleep time; just keep it low always */ + mask_tpm_reset: mask-tpm-reset { + samsung,pins = "gpx0-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + samsung,pin-val = <0>; }; -}; -&fimd { - status = "okay"; - samsung,invert-vclk; + tpm_irq: tpm-irq { + samsung,pins = "gpx1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ec_irq: ec-irq { + samsung,pins = "gpx1-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + tps65090_irq: tps65090-irq { + samsung,pins = "gpx2-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + dp_hpd_gpio: dp_hpd_gpio { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; }; -&hsi2c_9 { - status = "okay"; - clock-frequency = <400000>; +&pinctrl_3 { + /* Drive SPI lines at x2 for better integrity */ + spi2-bus { + samsung,pin-drv = <2>; + }; - tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; - /* Unused irq; but still need to configure the pins */ - pinctrl-names = "default"; - pinctrl-0 = <&tpm_irq>; + /* Drive SPI chip select at x2 for better integrity */ + ec_spi_cs: ec-spi-cs { + samsung,pins = "gpb1-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + usb300_vbus_en: usb300-vbus-en { + samsung,pins = "gph0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb301_vbus_en: usb301-vbus-en { + samsung,pins = "gph0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; }; -&i2c_2 { +&rtc { status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - samsung,i2c-slave-addr = <0x50>; }; -&hdmi { +&spi_2 { + status = "okay"; + num-cs = <1>; + samsung,spi-src-clk = <0>; + cs-gpios = <&gpb1 2 0>; + + cros_ec: cros-ec@0 { + compatible = "google,cros-ec-spi"; + interrupt-parent = <&gpx1>; + interrupts = <5 0>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_spi_cs &ec_irq>; + reg = <0>; + spi-max-frequency = <3125000>; + + controller-data { + samsung,spi-feedback-delay = <1>; + }; + + i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + google,remote-bus = <0>; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,poll-retry-count = <1>; + sbs,i2c-retry-count = <2>; + }; + + power-regulator@48 { + compatible = "ti,tps65090"; + reg = <0x48>; + + /* + * Config irq to disable internal pulls + * even though we run in polling mode. + */ + pinctrl-names = "default"; + pinctrl-0 = <&tps65090_irq>; + + vsys1-supply = <&vbat>; + vsys2-supply = <&vbat>; + vsys3-supply = <&vbat>; + infet1-supply = <&vbat>; + infet2-supply = <&vbat>; + infet3-supply = <&vbat>; + infet4-supply = <&vbat>; + infet5-supply = <&vbat>; + infet6-supply = <&vbat>; + infet7-supply = <&vbat>; + vsys-l1-supply = <&vbat>; + vsys-l2-supply = <&vbat>; + + regulators { + tps65090_dcdc1: dcdc1 { + ti,enable-ext-control; + }; + tps65090_dcdc2: dcdc2 { + ti,enable-ext-control; + }; + tps65090_dcdc3: dcdc3 { + ti,enable-ext-control; + }; + tps65090_fet1: fet1 { + regulator-name = "vcd_led"; + }; + tps65090_fet2: fet2 { + regulator-name = "video_mid"; + regulator-always-on; + }; + tps65090_fet3: fet3 { + regulator-name = "wwan_r"; + regulator-always-on; + }; + tps65090_fet4: fet4 { + regulator-name = "sdcard"; + regulator-always-on; + }; + tps65090_fet5: fet5 { + regulator-name = "camout"; + }; + tps65090_fet6: fet6 { + regulator-name = "lcd_vdd"; + }; + tps65090_fet7: fet7 { + regulator-name = "video_mid_1a"; + regulator-always-on; + }; + tps65090_ldo1: ldo1 { + }; + tps65090_ldo2: ldo2 { + }; + }; + + charger { + compatible = "ti,tps65090-charger"; + }; + }; + }; + }; +}; + +&uart_3 { status = "okay"; - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - ddc = <&i2c_2>; }; &usbdrd_phy0 { @@ -251,3 +441,5 @@ &watchdog { timeout-sec = <32>; }; + +#include "cros-ec-keyboard.dtsi" diff --git a/dts/src/arm/ge863-pro3.dtsi b/dts/src/arm/ge863-pro3.dtsi index 230099bb31..0d0e62489d 100644 --- a/dts/src/arm/ge863-pro3.dtsi +++ b/dts/src/arm/ge863-pro3.dtsi @@ -19,6 +19,10 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <6000000>; }; + + main_xtal { + clock-frequency = <6000000>; + }; }; ahb { diff --git a/dts/src/arm/hi3620.dtsi b/dts/src/arm/hi3620.dtsi index 83a5b8685b..6cbb62e5c6 100644 --- a/dts/src/arm/hi3620.dtsi +++ b/dts/src/arm/hi3620.dtsi @@ -33,6 +33,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "hisilicon,hi3620-smp"; cpu@0 { device_type = "cpu"; diff --git a/dts/src/arm/hisi-x5hd2-dkb.dts b/dts/src/arm/hisi-x5hd2-dkb.dts new file mode 100644 index 0000000000..05b44c272c --- /dev/null +++ b/dts/src/arm/hisi-x5hd2-dkb.dts @@ -0,0 +1,53 @@ +/* + * Copyright (c) 2013-2014 Linaro Ltd. + * Copyright (c) 2013-2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/dts-v1/; +#include "hisi-x5hd2.dtsi" + +/ { + model = "Hisilicon HIX5HD2 Development Board"; + compatible = "hisilicon,hix5hd2"; + + chosen { + bootargs = "console=ttyAMA0,115200 earlyprintk"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "hisilicon,hix5hd2-smp"; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&l2>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&l2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; + }; +}; + +&timer0 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm/hisi-x5hd2.dtsi b/dts/src/arm/hisi-x5hd2.dtsi new file mode 100644 index 0000000000..f85ba2924f --- /dev/null +++ b/dts/src/arm/hisi-x5hd2.dtsi @@ -0,0 +1,170 @@ +/* + * Copyright (c) 2013-2014 Linaro Ltd. + * Copyright (c) 2013-2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/hix5hd2-clock.h> + +/ { + aliases { + serial0 = &uart0; + }; + + gic: interrupt-controller@f8a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + /* gic dist base, gic cpu base */ + reg = <0xf8a01000 0x1000>, <0xf8a00100 0x100>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges = <0 0xf8000000 0x8000000>; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + ranges; + + timer0: timer@00002000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00002000 0x1000>; + /* timer00 & timer01 */ + interrupts = <0 24 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer1: timer@00a29000 { + /* + * Only used in NORMAL state, not available ins + * SLOW or DOZE state. + * The rate is fixed in 24MHz. + */ + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00a29000 0x1000>; + /* timer10 & timer11 */ + interrupts = <0 25 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer2: timer@00a2a000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00a2a000 0x1000>; + /* timer20 & timer21 */ + interrupts = <0 26 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer3: timer@00a2b000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00a2b000 0x1000>; + /* timer30 & timer31 */ + interrupts = <0 27 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer4: timer@00a81000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00a81000 0x1000>; + /* timer30 & timer31 */ + interrupts = <0 28 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + uart0: uart@00b00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00b00000 0x1000>; + interrupts = <0 49 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart1: uart@00006000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00006000 0x1000>; + interrupts = <0 50 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart2: uart@00b02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00b02000 0x1000>; + interrupts = <0 51 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart3: uart@00b03000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00b03000 0x1000>; + interrupts = <0 52 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart4: uart@00b04000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb04000 0x1000>; + interrupts = <0 53 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + }; + + local_timer@00a00600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x00a00600 0x20>; + interrupts = <1 13 0xf01>; + }; + + l2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x00a10000 0x100000>; + interrupts = <0 15 4>; + cache-unified; + cache-level = <2>; + }; + + sysctrl: system-controller@00000000 { + compatible = "hisilicon,sysctrl"; + reg = <0x00000000 0x1000>; + reboot-offset = <0x4>; + }; + + cpuctrl@00a22000 { + compatible = "hisilicon,cpuctrl"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00a22000 0x2000>; + ranges = <0 0x00a22000 0x2000>; + + clock: clock@0 { + compatible = "hisilicon,hix5hd2-clock"; + reg = <0 0x2000>; + #clock-cells = <1>; + }; + }; + }; +}; diff --git a/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts new file mode 100644 index 0000000000..68d0834a2d --- /dev/null +++ b/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts @@ -0,0 +1,73 @@ +/* + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "imx25-eukrea-mbimxsd25-baseboard.dts" + +/ { + model = "Eukrea MBIMXSD25 with the CMO-QVGA Display"; + compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25"; + + cmo_qvga: display { + model = "CMO-QVGA"; + bits-per-pixel = <16>; + fsl,pcr = <0xcad08b80>; + bus-width = <18>; + native-mode = <&qvga_timings>; + display-timings { + qvga_timings: 320x240 { + clock-frequency = <6500000>; + hactive = <320>; + vactive = <240>; + hback-porch = <30>; + hfront-porch = <38>; + vback-porch = <20>; + vfront-porch = <3>; + hsync-len = <15>; + vsync-len = <4>; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_lcd_3v3: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcd_3v3>; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&iomuxc { + imx25-eukrea-mbimxsd25-baseboard-cmo-qvga { + pinctrl_reg_lcd_3v3: reg_lcd_3v3 { + fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>; + }; + }; +}; + +&lcdc { + display = <&cmo_qvga>; + fsl,lpccr = <0x00a903ff>; + lcd-supply = <®_lcd_3v3>; + status = "okay"; +}; diff --git a/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts new file mode 100644 index 0000000000..8eee2f65fe --- /dev/null +++ b/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts @@ -0,0 +1,45 @@ +/* + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "imx25-eukrea-mbimxsd25-baseboard.dts" + +/ { + model = "Eukrea MBIMXSD25 with the DVI-SVGA Display"; + compatible = "eukrea,mbimxsd25-baseboard-dvi-svga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25"; + + dvi_svga: display { + model = "DVI-SVGA"; + bits-per-pixel = <16>; + fsl,pcr = <0xfa208b80>; + bus-width = <18>; + native-mode = <&dvi_svga_timings>; + display-timings { + dvi_svga_timings: 800x600 { + clock-frequency = <40000000>; + hactive = <800>; + vactive = <600>; + hback-porch = <75>; + hfront-porch = <75>; + vback-porch = <7>; + vfront-porch = <75>; + hsync-len = <7>; + vsync-len = <7>; + }; + }; + }; +}; + +&lcdc { + display = <&dvi_svga>; + status = "okay"; +}; diff --git a/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts new file mode 100644 index 0000000000..447da62631 --- /dev/null +++ b/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts @@ -0,0 +1,45 @@ +/* + * Copyright 2013 Eukréa Electromatique <denis@eukrea.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "imx25-eukrea-mbimxsd25-baseboard.dts" + +/ { + model = "Eukrea MBIMXSD25 with the DVI-VGA Display"; + compatible = "eukrea,mbimxsd25-baseboard-dvi-vga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25"; + + dvi_vga: display { + model = "DVI-VGA"; + bits-per-pixel = <16>; + fsl,pcr = <0xfa208b80>; + bus-width = <18>; + native-mode = <&dvi_vga_timings>; + display-timings { + dvi_vga_timings: 640x480 { + clock-frequency = <31250000>; + hactive = <640>; + vactive = <480>; + hback-porch = <100>; + hfront-porch = <100>; + vback-porch = <7>; + vfront-porch = <100>; + hsync-len = <7>; + vsync-len = <7>; + }; + }; + }; +}; + +&lcdc { + display = <&dvi_vga>; + status = "okay"; +}; diff --git a/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts b/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts index ad12da38fc..ed1d0b4578 100644 --- a/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/dts/src/arm/imx25-eukrea-mbimxsd25-baseboard.dts @@ -155,7 +155,6 @@ &ssi1 { codec-handle = <&tlv320aic23>; - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/dts/src/arm/imx25-pdk.dts b/dts/src/arm/imx25-pdk.dts index c608942b8a..9c21b15837 100644 --- a/dts/src/arm/imx25-pdk.dts +++ b/dts/src/arm/imx25-pdk.dts @@ -233,7 +233,6 @@ &ssi1 { codec-handle = <&codec>; - fsl,mode = "i2s-slave"; status = "okay"; }; @@ -249,3 +248,10 @@ dr_mode = "host"; status = "okay"; }; + +&usbotg { + phy_type = "utmi"; + dr_mode = "otg"; + external-vbus-divider; + status = "okay"; +}; diff --git a/dts/src/arm/imx25.dtsi b/dts/src/arm/imx25.dtsi index bb74d9582b..c1740396b2 100644 --- a/dts/src/arm/imx25.dtsi +++ b/dts/src/arm/imx25.dtsi @@ -312,7 +312,7 @@ gpt4: timer@53f84000 { compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; reg = <0x53f84000 0x4000>; - clocks = <&clks 9>, <&clks 45>; + clocks = <&clks 95>, <&clks 47>; clock-names = "ipg", "per"; interrupts = <1>; }; @@ -320,7 +320,7 @@ gpt3: timer@53f88000 { compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; reg = <0x53f88000 0x4000>; - clocks = <&clks 9>, <&clks 47>; + clocks = <&clks 94>, <&clks 47>; clock-names = "ipg", "per"; interrupts = <29>; }; @@ -328,7 +328,7 @@ gpt2: timer@53f8c000 { compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; reg = <0x53f8c000 0x4000>; - clocks = <&clks 9>, <&clks 47>; + clocks = <&clks 93>, <&clks 47>; clock-names = "ipg", "per"; interrupts = <53>; }; @@ -336,7 +336,7 @@ gpt1: timer@53f90000 { compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; reg = <0x53f90000 0x4000>; - clocks = <&clks 9>, <&clks 47>; + clocks = <&clks 92>, <&clks 47>; clock-names = "ipg", "per"; interrupts = <54>; }; diff --git a/dts/src/arm/imx27-eukrea-cpuimx27.dtsi b/dts/src/arm/imx27-eukrea-cpuimx27.dtsi new file mode 100644 index 0000000000..e2242638ea --- /dev/null +++ b/dts/src/arm/imx27-eukrea-cpuimx27.dtsi @@ -0,0 +1,296 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx27.dtsi" + +/ { + model = "Eukrea CPUIMX27"; + compatible = "eukrea,cpuimx27", "fsl,imx27"; + + memory { + reg = <0xa0000000 0x04000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-bus"; + + clk14745600: clock@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <14745600>; + reg = <0>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + +&owire { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_owire>; + status = "okay"; +}; + +&sdhci2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhc2>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh2>; + dr_mode = "host"; + phy_type = "ulpi"; + disable-over-current; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "otg"; + phy_type = "ulpi"; + disable-over-current; + status = "okay"; +}; + +&weim { + status = "okay"; + + nor: nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x00000000 0x04000000>; + bank-width = <2>; + linux,mtd-name = "physmap-flash.0"; + fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>; + }; + + uart8250@3,200000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8250_1>; + compatible = "ns8250"; + clocks = <&clk14745600>; + fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>; + interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>; + reg = <3 0x200000 0x1000>; + reg-shift = <1>; + reg-io-width = <1>; + no-loopback-test; + }; + + uart8250@3,400000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8250_2>; + compatible = "ns8250"; + clocks = <&clk14745600>; + fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>; + interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>; + reg = <3 0x400000 0x1000>; + reg-shift = <1>; + reg-io-width = <1>; + no-loopback-test; + }; + + uart8250@3,800000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8250_3>; + compatible = "ns8250"; + clocks = <&clk14745600>; + fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>; + interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>; + reg = <3 0x800000 0x1000>; + reg-shift = <1>; + reg-io-width = <1>; + no-loopback-test; + }; + + uart8250@3,1000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8250_4>; + compatible = "ns8250"; + clocks = <&clk14745600>; + fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>; + interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>; + reg = <3 0x1000000 0x1000>; + reg-shift = <1>; + reg-io-width = <1>; + no-loopback-test; + }; +}; + +&iomuxc { + imx27-eukrea-cpuimx27 { + pinctrl_fec: fecgrp { + fsl,pins = < + MX27_PAD_SD3_CMD__FEC_TXD0 0x0 + MX27_PAD_SD3_CLK__FEC_TXD1 0x0 + MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 + MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 + MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 + MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 + MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 + MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 + MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 + MX27_PAD_ATA_DATA7__FEC_MDC 0x0 + MX27_PAD_ATA_DATA8__FEC_CRS 0x0 + MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 + MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 + MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 + MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 + MX27_PAD_ATA_DATA13__FEC_COL 0x0 + MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 + MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX27_PAD_I2C_DATA__I2C_DATA 0x0 + MX27_PAD_I2C_CLK__I2C_CLK 0x0 + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + MX27_PAD_NFRB__NFRB 0x0 + MX27_PAD_NFCLE__NFCLE 0x0 + MX27_PAD_NFWP_B__NFWP_B 0x0 + MX27_PAD_NFCE_B__NFCE_B 0x0 + MX27_PAD_NFALE__NFALE 0x0 + MX27_PAD_NFRE_B__NFRE_B 0x0 + MX27_PAD_NFWE_B__NFWE_B 0x0 + >; + }; + + pinctrl_owire: owiregrp { + fsl,pins = < + MX27_PAD_RTCK__OWIRE 0x0 + >; + }; + + pinctrl_sdhc2: sdhc2grp { + fsl,pins = < + MX27_PAD_SD2_CLK__SD2_CLK 0x0 + MX27_PAD_SD2_CMD__SD2_CMD 0x0 + MX27_PAD_SD2_D0__SD2_D0 0x0 + MX27_PAD_SD2_D1__SD2_D1 0x0 + MX27_PAD_SD2_D2__SD2_D2 0x0 + MX27_PAD_SD2_D3__SD2_D3 0x0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX27_PAD_USBH1_TXDM__UART4_TXD 0x0 + MX27_PAD_USBH1_RXDP__UART4_RXD 0x0 + MX27_PAD_USBH1_TXDP__UART4_CTS 0x0 + MX27_PAD_USBH1_FS__UART4_RTS 0x0 + >; + }; + + pinctrl_uart8250_1: uart82501grp { + fsl,pins = < + MX27_PAD_USB_PWR__GPIO2_23 0x0 + >; + }; + + pinctrl_uart8250_2: uart82502grp { + fsl,pins = < + MX27_PAD_USBH1_SUSP__GPIO2_22 0x0 + >; + }; + + pinctrl_uart8250_3: uart82503grp { + fsl,pins = < + MX27_PAD_USBH1_OE_B__GPIO2_27 0x0 + >; + }; + + pinctrl_uart8250_4: uart82504grp { + fsl,pins = < + MX27_PAD_USBH1_RXDM__GPIO2_30 0x0 + >; + }; + + pinctrl_usbh2: usbh2grp { + fsl,pins = < + MX27_PAD_USBH2_CLK__USBH2_CLK 0x0 + MX27_PAD_USBH2_DIR__USBH2_DIR 0x0 + MX27_PAD_USBH2_NXT__USBH2_NXT 0x0 + MX27_PAD_USBH2_STP__USBH2_STP 0x0 + MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0 + MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0 + MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0 + MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0 + MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0 + MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0 + MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0 + MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 + MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0 + MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0 + MX27_PAD_USBOTG_STP__USBOTG_STP 0x0 + MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0 + MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0 + MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0 + MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0 + MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0 + MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0 + MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0 + MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0 + >; + }; + }; +}; diff --git a/dts/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts b/dts/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts new file mode 100644 index 0000000000..2ab65fc4c1 --- /dev/null +++ b/dts/src/arm/imx27-eukrea-mbimxsd27-baseboard.dts @@ -0,0 +1,273 @@ +/* + * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx27-eukrea-cpuimx27.dtsi" + +/ { + model = "Eukrea MBIMXSD27"; + compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27"; + + display0: CMO-QVGA { + model = "CMO-QVGA"; + native-mode = <&timing0>; + bits-per-pixel = <16>; + fsl,pcr = <0xfad08b80>; + + display-timings { + timing0: 320x240 { + clock-frequency = <6500000>; + hactive = <320>; + vactive = <240>; + hback-porch = <20>; + hsync-len = <30>; + hfront-porch = <38>; + vback-porch = <4>; + vsync-len = <3>; + vfront-porch = <15>; + }; + }; + }; + + backlight { + compatible = "gpio-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpioleds>; + + led1 { + label = "system::live"; + gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "system::user"; + gpios = <&gpio6 19 GPIO_ACTIVE_LOW>; + }; + }; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-bus"; + + reg_lcd: regulator@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdreg>; + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "LCD"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&cspi1 { + pinctrl-0 = <&pinctrl_cspi1>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + status = "okay"; + + ads7846 { + compatible = "ti,ads7846"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + reg = <0>; + interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>; + spi-cpol; + spi-max-frequency = <1500000>; + ti,keep-vref-on; + }; +}; + +&fb { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imxfb>; + display = <&display0>; + lcd-supply = <®_lcd>; + fsl,dmacr = <0x00040060>; + fsl,lscr1 = <0x00120300>; + fsl,lpccr = <0x00a903ff>; + status = "okay"; +}; + +&i2c1 { + codec: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + }; +}; + +&kpp { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_UP) + MATRIX_KEY(0, 1, KEY_DOWN) + MATRIX_KEY(1, 0, KEY_RIGHT) + MATRIX_KEY(1, 1, KEY_LEFT) + >; + status = "okay"; +}; + +&sdhci1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&ssi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssi1>; + codec-handle = <&codec>; + status = "okay"; +}; + +&uart1 { + fsl,uart-has-rtscts; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + fsl,uart-has-rtscts; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + fsl,uart-has-rtscts; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&iomuxc { + imx27-eukrea-cpuimx27-baseboard { + pinctrl_cspi1: cspi1grp { + fsl,pins = < + MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0 + MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 + MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0 + MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* CS0 */ + >; + }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX27_PAD_PWMO__GPIO5_5 0x0 + >; + }; + + pinctrl_gpioleds: gpioledsgrp { + fsl,pins = < + MX27_PAD_PC_PWRON__GPIO6_16 0x0 + MX27_PAD_PC_CD2_B__GPIO6_19 0x0 + >; + }; + + pinctrl_imxfb: imxfbgrp { + fsl,pins = < + MX27_PAD_LD0__LD0 0x0 + MX27_PAD_LD1__LD1 0x0 + MX27_PAD_LD2__LD2 0x0 + MX27_PAD_LD3__LD3 0x0 + MX27_PAD_LD4__LD4 0x0 + MX27_PAD_LD5__LD5 0x0 + MX27_PAD_LD6__LD6 0x0 + MX27_PAD_LD7__LD7 0x0 + MX27_PAD_LD8__LD8 0x0 + MX27_PAD_LD9__LD9 0x0 + MX27_PAD_LD10__LD10 0x0 + MX27_PAD_LD11__LD11 0x0 + MX27_PAD_LD12__LD12 0x0 + MX27_PAD_LD13__LD13 0x0 + MX27_PAD_LD14__LD14 0x0 + MX27_PAD_LD15__LD15 0x0 + MX27_PAD_LD16__LD16 0x0 + MX27_PAD_LD17__LD17 0x0 + MX27_PAD_CONTRAST__CONTRAST 0x0 + MX27_PAD_OE_ACD__OE_ACD 0x0 + MX27_PAD_HSYNC__HSYNC 0x0 + MX27_PAD_VSYNC__VSYNC 0x0 + >; + }; + + pinctrl_lcdreg: lcdreggrp { + fsl,pins = < + MX27_PAD_CLS__GPIO1_25 0x0 + >; + }; + + pinctrl_sdhc1: sdhc1grp { + fsl,pins = < + MX27_PAD_SD1_CLK__SD1_CLK 0x0 + MX27_PAD_SD1_CMD__SD1_CMD 0x0 + MX27_PAD_SD1_D0__SD1_D0 0x0 + MX27_PAD_SD1_D1__SD1_D1 0x0 + MX27_PAD_SD1_D2__SD1_D2 0x0 + MX27_PAD_SD1_D3__SD1_D3 0x0 + >; + }; + + pinctrl_ssi1: ssi1grp { + fsl,pins = < + MX27_PAD_SSI4_CLK__SSI4_CLK 0x0 + MX27_PAD_SSI4_FS__SSI4_FS 0x0 + MX27_PAD_SSI4_RXDAT__SSI4_RXDAT 0x1 + MX27_PAD_SSI4_TXDAT__SSI4_TXDAT 0x1 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + MX27_PAD_CSPI1_RDY__GPIO4_25 0x0 /* IRQ */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX27_PAD_UART1_TXD__UART1_TXD 0x0 + MX27_PAD_UART1_RXD__UART1_RXD 0x0 + MX27_PAD_UART1_CTS__UART1_CTS 0x0 + MX27_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX27_PAD_UART2_TXD__UART2_TXD 0x0 + MX27_PAD_UART2_RXD__UART2_RXD 0x0 + MX27_PAD_UART2_CTS__UART2_CTS 0x0 + MX27_PAD_UART2_RTS__UART2_RTS 0x0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX27_PAD_UART3_TXD__UART3_TXD 0x0 + MX27_PAD_UART3_RXD__UART3_RXD 0x0 + MX27_PAD_UART3_CTS__UART3_CTS 0x0 + MX27_PAD_UART3_RTS__UART3_RTS 0x0 + >; + }; + }; +}; diff --git a/dts/src/arm/imx27-pdk.dts b/dts/src/arm/imx27-pdk.dts index 4c317716b5..49450dbbca 100644 --- a/dts/src/arm/imx27-pdk.dts +++ b/dts/src/arm/imx27-pdk.dts @@ -28,7 +28,7 @@ usbphy0: usbphy@0 { compatible = "usb-nop-xceiv"; reg = <0>; - clocks = <&clks 0>; + clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "main_clk"; }; }; diff --git a/dts/src/arm/imx27-phytec-phycore-rdk.dts b/dts/src/arm/imx27-phytec-phycore-rdk.dts index fe02bc7a24..538568b0de 100644 --- a/dts/src/arm/imx27-phytec-phycore-rdk.dts +++ b/dts/src/arm/imx27-phytec-phycore-rdk.dts @@ -61,7 +61,7 @@ compatible = "usb-nop-xceiv"; reg = <2>; vcc-supply = <®_5v0>; - clocks = <&clks 0>; + clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "main_clk"; }; }; diff --git a/dts/src/arm/imx27-phytec-phycore-som.dtsi b/dts/src/arm/imx27-phytec-phycore-som.dtsi index 31e9f7049f..b4e955e3be 100644 --- a/dts/src/arm/imx27-phytec-phycore-som.dtsi +++ b/dts/src/arm/imx27-phytec-phycore-som.dtsi @@ -51,7 +51,7 @@ compatible = "usb-nop-xceiv"; reg = <0>; vcc-supply = <&sw3_reg>; - clocks = <&clks 0>; + clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "main_clk"; }; }; @@ -310,7 +310,6 @@ &ssi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssi1>; - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/dts/src/arm/imx27-pinfunc.h b/dts/src/arm/imx27-pinfunc.h index f5387b4de5..597bb5f74d 100644 --- a/dts/src/arm/imx27-pinfunc.h +++ b/dts/src/arm/imx27-pinfunc.h @@ -101,14 +101,6 @@ #define MX27_PAD_CONTRAST__GPIO1_30 0x1e 0x032 #define MX27_PAD_OE_ACD__OE_ACD 0x1f 0x004 #define MX27_PAD_OE_ACD__GPIO1_31 0x1f 0x032 -#define MX27_PAD_UNUSED0__UNUSED0 0x20 0x004 -#define MX27_PAD_UNUSED0__GPIO2_0 0x20 0x032 -#define MX27_PAD_UNUSED1__UNUSED1 0x21 0x004 -#define MX27_PAD_UNUSED1__GPIO2_1 0x21 0x032 -#define MX27_PAD_UNUSED2__UNUSED2 0x22 0x004 -#define MX27_PAD_UNUSED2__GPIO2_2 0x22 0x032 -#define MX27_PAD_UNUSED3__UNUSED3 0x23 0x004 -#define MX27_PAD_UNUSED3__GPIO2_3 0x23 0x032 #define MX27_PAD_SD2_D0__SD2_D0 0x24 0x004 #define MX27_PAD_SD2_D0__MSHC_DATA0 0x24 0x005 #define MX27_PAD_SD2_D0__GPIO2_4 0x24 0x032 @@ -183,16 +175,6 @@ #define MX27_PAD_USBH1_RXDP__USBH1_RXDP 0x3f 0x004 #define MX27_PAD_USBH1_RXDP__UART4_RXD 0x3f 0x001 #define MX27_PAD_USBH1_RXDP__GPIO2_31 0x3f 0x032 -#define MX27_PAD_UNUSED4__UNUSED4 0x40 0x004 -#define MX27_PAD_UNUSED4__GPIO3_0 0x40 0x032 -#define MX27_PAD_UNUSED5__UNUSED5 0x41 0x004 -#define MX27_PAD_UNUSED5__GPIO3_1 0x41 0x032 -#define MX27_PAD_UNUSED6__UNUSED6 0x42 0x004 -#define MX27_PAD_UNUSED6__GPIO3_2 0x42 0x032 -#define MX27_PAD_UNUSED7__UNUSED7 0x43 0x004 -#define MX27_PAD_UNUSED7__GPIO3_3 0x43 0x032 -#define MX27_PAD_UNUSED8__UNUSED8 0x44 0x004 -#define MX27_PAD_UNUSED8__GPIO3_4 0x44 0x032 #define MX27_PAD_I2C2_SDA__I2C2_SDA 0x45 0x004 #define MX27_PAD_I2C2_SDA__GPIO3_5 0x45 0x032 #define MX27_PAD_I2C2_SCL__I2C2_SCL 0x46 0x004 @@ -422,18 +404,6 @@ #define MX27_PAD_USBOTG_CLK__GPIO5_24 0x98 0x032 #define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x99 0x004 #define MX27_PAD_USBOTG_DATA7__GPIO5_25 0x99 0x032 -#define MX27_PAD_UNUSED9__UNUSED9 0x9a 0x004 -#define MX27_PAD_UNUSED9__GPIO5_26 0x9a 0x032 -#define MX27_PAD_UNUSED10__UNUSED10 0x9b 0x004 -#define MX27_PAD_UNUSED10__GPIO5_27 0x9b 0x032 -#define MX27_PAD_UNUSED11__UNUSED11 0x9c 0x004 -#define MX27_PAD_UNUSED11__GPIO5_28 0x9c 0x032 -#define MX27_PAD_UNUSED12__UNUSED12 0x9d 0x004 -#define MX27_PAD_UNUSED12__GPIO5_29 0x9d 0x032 -#define MX27_PAD_UNUSED13__UNUSED13 0x9e 0x004 -#define MX27_PAD_UNUSED13__GPIO5_30 0x9e 0x032 -#define MX27_PAD_UNUSED14__UNUSED14 0x9f 0x004 -#define MX27_PAD_UNUSED14__GPIO5_31 0x9f 0x032 #define MX27_PAD_NFRB__NFRB 0xa0 0x000 #define MX27_PAD_NFRB__ETMTRACEPKT3 0xa0 0x005 #define MX27_PAD_NFRB__GPIO6_0 0xa0 0x032 @@ -506,21 +476,5 @@ #define MX27_PAD_ATA_DATA15__ETMTRACEPKT4 0xb7 0x005 #define MX27_PAD_ATA_DATA15__FEC_TX_EN 0xb7 0x006 #define MX27_PAD_ATA_DATA15__GPIO6_23 0xb7 0x032 -#define MX27_PAD_UNUSED15__UNUSED15 0xb8 0x004 -#define MX27_PAD_UNUSED15__GPIO6_24 0xb8 0x032 -#define MX27_PAD_UNUSED16__UNUSED16 0xb9 0x004 -#define MX27_PAD_UNUSED16__GPIO6_25 0xb9 0x032 -#define MX27_PAD_UNUSED17__UNUSED17 0xba 0x004 -#define MX27_PAD_UNUSED17__GPIO6_26 0xba 0x032 -#define MX27_PAD_UNUSED18__UNUSED18 0xbb 0x004 -#define MX27_PAD_UNUSED18__GPIO6_27 0xbb 0x032 -#define MX27_PAD_UNUSED19__UNUSED19 0xbc 0x004 -#define MX27_PAD_UNUSED19__GPIO6_28 0xbc 0x032 -#define MX27_PAD_UNUSED20__UNUSED20 0xbd 0x004 -#define MX27_PAD_UNUSED20__GPIO6_29 0xbd 0x032 -#define MX27_PAD_UNUSED21__UNUSED21 0xbe 0x004 -#define MX27_PAD_UNUSED21__GPIO6_30 0xbe 0x032 -#define MX27_PAD_UNUSED22__UNUSED22 0xbf 0x004 -#define MX27_PAD_UNUSED22__GPIO6_31 0xbf 0x032 #endif /* __DTS_IMX27_PINFUNC_H */ diff --git a/dts/src/arm/imx27.dtsi b/dts/src/arm/imx27.dtsi index a75555c395..107d713e1c 100644 --- a/dts/src/arm/imx27.dtsi +++ b/dts/src/arm/imx27.dtsi @@ -11,9 +11,11 @@ #include "skeleton.dtsi" #include "imx27-pinfunc.h" + +#include <dt-bindings/clock/imx27-clock.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/gpio/gpio.h> / { aliases { @@ -68,7 +70,7 @@ 399000 1450000 >; clock-latency = <62500>; - clocks = <&clks 18>; + clocks = <&clks IMX27_CLK_CPU_DIV>; voltage-tolerance = <5>; }; }; @@ -91,7 +93,8 @@ compatible = "fsl,imx27-dma"; reg = <0x10001000 0x1000>; interrupts = <32>; - clocks = <&clks 50>, <&clks 70>; + clocks = <&clks IMX27_CLK_DMA_IPG_GATE>, + <&clks IMX27_CLK_DMA_AHB_GATE>; clock-names = "ipg", "ahb"; #dma-cells = <1>; #dma-channels = <16>; @@ -101,14 +104,15 @@ compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; reg = <0x10002000 0x1000>; interrupts = <27>; - clocks = <&clks 74>; + clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>; }; gpt1: timer@10003000 { compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x10003000 0x1000>; interrupts = <26>; - clocks = <&clks 46>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -116,7 +120,8 @@ compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x10004000 0x1000>; interrupts = <25>; - clocks = <&clks 45>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -124,7 +129,8 @@ compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x10005000 0x1000>; interrupts = <24>; - clocks = <&clks 44>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -133,7 +139,8 @@ compatible = "fsl,imx27-pwm"; reg = <0x10006000 0x1000>; interrupts = <23>; - clocks = <&clks 34>, <&clks 61>; + clocks = <&clks IMX27_CLK_PWM_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -141,14 +148,14 @@ compatible = "fsl,imx27-kpp", "fsl,imx21-kpp"; reg = <0x10008000 0x1000>; interrupts = <21>; - clocks = <&clks 37>; + clocks = <&clks IMX27_CLK_KPP_IPG_GATE>; status = "disabled"; }; owire: owire@10009000 { compatible = "fsl,imx27-owire", "fsl,imx21-owire"; reg = <0x10009000 0x1000>; - clocks = <&clks 35>; + clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>; status = "disabled"; }; @@ -156,7 +163,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000a000 0x1000>; interrupts = <20>; - clocks = <&clks 81>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -165,7 +173,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000b000 0x1000>; interrupts = <19>; - clocks = <&clks 80>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART2_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -174,7 +183,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000c000 0x1000>; interrupts = <18>; - clocks = <&clks 79>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART3_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -183,7 +193,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000d000 0x1000>; interrupts = <17>; - clocks = <&clks 78>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART4_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -194,7 +205,8 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000e000 0x1000>; interrupts = <16>; - clocks = <&clks 53>, <&clks 60>; + clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -205,7 +217,8 @@ compatible = "fsl,imx27-cspi"; reg = <0x1000f000 0x1000>; interrupts = <15>; - clocks = <&clks 52>, <&clks 60>; + clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -215,7 +228,7 @@ compatible = "fsl,imx27-ssi", "fsl,imx21-ssi"; reg = <0x10010000 0x1000>; interrupts = <14>; - clocks = <&clks 26>; + clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>; dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>; dma-names = "rx0", "tx0", "rx1", "tx1"; fsl,fifo-depth = <8>; @@ -227,7 +240,7 @@ compatible = "fsl,imx27-ssi", "fsl,imx21-ssi"; reg = <0x10011000 0x1000>; interrupts = <13>; - clocks = <&clks 25>; + clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>; dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>; dma-names = "rx0", "tx0", "rx1", "tx1"; fsl,fifo-depth = <8>; @@ -240,7 +253,7 @@ compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; reg = <0x10012000 0x1000>; interrupts = <12>; - clocks = <&clks 40>; + clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>; status = "disabled"; }; @@ -248,7 +261,8 @@ compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x10013000 0x1000>; interrupts = <11>; - clocks = <&clks 30>, <&clks 60>; + clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; dmas = <&dma 7>; dma-names = "rx-tx"; @@ -259,7 +273,8 @@ compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x10014000 0x1000>; interrupts = <10>; - clocks = <&clks 29>, <&clks 60>; + clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; dmas = <&dma 6>; dma-names = "rx-tx"; @@ -276,6 +291,7 @@ gpio1: gpio@10015000 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015000 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -286,6 +302,7 @@ gpio2: gpio@10015100 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015100 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -296,6 +313,7 @@ gpio3: gpio@10015200 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015200 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -306,6 +324,7 @@ gpio4: gpio@10015300 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015300 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -316,6 +335,7 @@ gpio5: gpio@10015400 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015400 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -326,6 +346,7 @@ gpio6: gpio@10015500 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015500 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -337,7 +358,7 @@ audmux: audmux@10016000 { compatible = "fsl,imx27-audmux", "fsl,imx21-audmux"; reg = <0x10016000 0x1000>; - clocks = <&clks 0>; + clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "audmux"; status = "disabled"; }; @@ -348,7 +369,8 @@ compatible = "fsl,imx27-cspi"; reg = <0x10017000 0x1000>; interrupts = <6>; - clocks = <&clks 51>, <&clks 60>; + clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -357,7 +379,8 @@ compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x10019000 0x1000>; interrupts = <4>; - clocks = <&clks 43>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -365,7 +388,8 @@ compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x1001a000 0x1000>; interrupts = <3>; - clocks = <&clks 42>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -373,7 +397,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1001b000 0x1000>; interrupts = <49>; - clocks = <&clks 77>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART5_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -382,7 +407,8 @@ compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1001c000 0x1000>; interrupts = <48>; - clocks = <&clks 78>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART6_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -393,7 +419,7 @@ compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; reg = <0x1001d000 0x1000>; interrupts = <1>; - clocks = <&clks 39>; + clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>; status = "disabled"; }; @@ -401,7 +427,8 @@ compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x1001e000 0x1000>; interrupts = <9>; - clocks = <&clks 28>, <&clks 60>; + clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; dmas = <&dma 36>; dma-names = "rx-tx"; @@ -412,7 +439,8 @@ compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x1001f000 0x1000>; interrupts = <2>; - clocks = <&clks 41>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; }; @@ -428,7 +456,9 @@ compatible = "fsl,imx27-fb", "fsl,imx21-fb"; interrupts = <61>; reg = <0x10021000 0x1000>; - clocks = <&clks 36>, <&clks 65>, <&clks 59>; + clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>, + <&clks IMX27_CLK_LCDC_AHB_GATE>, + <&clks IMX27_CLK_PER3_GATE>; clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -437,7 +467,8 @@ compatible = "fsl,imx27-vpu"; reg = <0x10023000 0x0200>; interrupts = <53>; - clocks = <&clks 57>, <&clks 66>; + clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>, + <&clks IMX27_CLK_VPU_AHB_GATE>; clock-names = "per", "ahb"; iram = <&iram>; }; @@ -446,7 +477,7 @@ compatible = "fsl,imx27-usb"; reg = <0x10024000 0x200>; interrupts = <56>; - clocks = <&clks 75>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>; fsl,usbmisc = <&usbmisc 0>; status = "disabled"; }; @@ -455,7 +486,7 @@ compatible = "fsl,imx27-usb"; reg = <0x10024200 0x200>; interrupts = <54>; - clocks = <&clks 75>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>; fsl,usbmisc = <&usbmisc 1>; status = "disabled"; }; @@ -464,7 +495,7 @@ compatible = "fsl,imx27-usb"; reg = <0x10024400 0x200>; interrupts = <55>; - clocks = <&clks 75>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>; fsl,usbmisc = <&usbmisc 2>; status = "disabled"; }; @@ -473,14 +504,15 @@ #index-cells = <1>; compatible = "fsl,imx27-usbmisc"; reg = <0x10024600 0x200>; - clocks = <&clks 62>; + clocks = <&clks IMX27_CLK_USB_AHB_GATE>; }; sahara2: sahara@10025000 { compatible = "fsl,imx27-sahara"; reg = <0x10025000 0x1000>; interrupts = <59>; - clocks = <&clks 32>, <&clks 64>; + clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>, + <&clks IMX27_CLK_SAHARA_AHB_GATE>; clock-names = "ipg", "ahb"; }; @@ -494,14 +526,15 @@ compatible = "fsl,imx27-iim"; reg = <0x10028000 0x1000>; interrupts = <62>; - clocks = <&clks 38>; + clocks = <&clks IMX27_CLK_IIM_IPG_GATE>; }; fec: ethernet@1002b000 { compatible = "fsl,imx27-fec"; reg = <0x1002b000 0x4000>; interrupts = <50>; - clocks = <&clks 48>, <&clks 67>; + clocks = <&clks IMX27_CLK_FEC_IPG_GATE>, + <&clks IMX27_CLK_FEC_AHB_GATE>; clock-names = "ipg", "ahb"; status = "disabled"; }; @@ -513,7 +546,7 @@ compatible = "fsl,imx27-nand"; reg = <0xd8000000 0x1000>; interrupts = <29>; - clocks = <&clks 54>; + clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>; status = "disabled"; }; @@ -522,7 +555,7 @@ #size-cells = <1>; compatible = "fsl,imx27-weim"; reg = <0xd8002000 0x1000>; - clocks = <&clks 0>; + clocks = <&clks IMX27_CLK_EMI_AHB_GATE>; ranges = < 0 0 0xc0000000 0x08000000 1 0 0xc8000000 0x08000000 diff --git a/dts/src/arm/imx28-cfa10036.dts b/dts/src/arm/imx28-cfa10036.dts index ae7c3390e6..b04b6b8850 100644 --- a/dts/src/arm/imx28-cfa10036.dts +++ b/dts/src/arm/imx28-cfa10036.dts @@ -53,6 +53,17 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31c3 /* + MX28_PAD_PWM3__GPIO_3_28 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; ssp0: ssp@80010000 { @@ -60,6 +71,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>; + vmmc-supply = <®_vddio_sd0>; bus-width = <4>; status = "okay"; }; @@ -116,4 +128,14 @@ default-state = "on"; }; }; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pwr_cfa10036>; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 28 0>; + }; }; diff --git a/dts/src/arm/imx28-m28.dtsi b/dts/src/arm/imx28-m28.dtsi new file mode 100644 index 0000000000..759cc56253 --- /dev/null +++ b/dts/src/arm/imx28-m28.dtsi @@ -0,0 +1,87 @@ +/* + * Copyright (C) 2014 Marek Vasut <marex@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx28.dtsi" + +/ { + model = "DENX M28"; + compatible = "denx,m28", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + gpmi-nand@8000c000 { + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + + partition@0 { + label = "bootloader"; + reg = <0x00000000 0x00300000>; + read-only; + }; + + partition@1 { + label = "environment"; + reg = <0x00300000 0x00080000>; + }; + + partition@2 { + label = "redundant-environment"; + reg = <0x00380000 0x00080000>; + }; + + partition@3 { + label = "kernel"; + reg = <0x00400000 0x00400000>; + }; + + partition@4 { + label = "filesystem"; + reg = <0x00800000 0x0f800000>; + }; + }; + }; + + apbx@80040000 { + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + rtc: rtc@68 { + compatible = "stm,m41t62"; + reg = <0x68>; + }; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p3v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; diff --git a/dts/src/arm/imx28-m28evk.dts b/dts/src/arm/imx28-m28evk.dts index f0ad7b9b9d..b3c09ae3b9 100644 --- a/dts/src/arm/imx28-m28evk.dts +++ b/dts/src/arm/imx28-m28evk.dts @@ -10,52 +10,14 @@ */ /dts-v1/; -#include "imx28.dtsi" +#include "imx28-m28.dtsi" / { model = "DENX M28EVK"; compatible = "denx,m28evk", "fsl,imx28"; - memory { - reg = <0x40000000 0x08000000>; - }; - apb@80000000 { apbh@80000000 { - gpmi-nand@8000c000 { - #address-cells = <1>; - #size-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - - partition@0 { - label = "bootloader"; - reg = <0x00000000 0x00300000>; - read-only; - }; - - partition@1 { - label = "environment"; - reg = <0x00300000 0x00080000>; - }; - - partition@2 { - label = "redundant-environment"; - reg = <0x00380000 0x00080000>; - }; - - partition@3 { - label = "kernel"; - reg = <0x00400000 0x00400000>; - }; - - partition@4 { - label = "filesystem"; - reg = <0x00800000 0x0f800000>; - }; - }; - ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; @@ -175,10 +137,6 @@ }; i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - sgtl5000: codec@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; @@ -192,11 +150,6 @@ reg = <0x51>; pagesize = <32>; }; - - rtc: rtc@68 { - compatible = "stm,m41t62"; - reg = <0x68>; - }; }; lradc@80050000 { @@ -284,19 +237,6 @@ }; regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - reg_vddio_sd0: regulator@1 { compatible = "regulator-fixed"; reg = <1>; diff --git a/dts/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts b/dts/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts index f04ae91eea..75b036700d 100644 --- a/dts/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts +++ b/dts/src/arm/imx35-eukrea-mbimxsd35-baseboard.dts @@ -133,7 +133,6 @@ &ssi1 { codec-handle = <&tlv320aic23>; - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/dts/src/arm/imx35.dtsi b/dts/src/arm/imx35.dtsi index 4759abb494..442e216ca9 100644 --- a/dts/src/arm/imx35.dtsi +++ b/dts/src/arm/imx35.dtsi @@ -193,6 +193,14 @@ #clock-cells = <1>; }; + gpt: timer@53f90000 { + compatible = "fsl,imx35-gpt", "fsl,imx31-gpt"; + reg = <0x53f90000 0x4000>; + interrupts = <29>; + clocks = <&clks 9>, <&clks 50>; + clock-names = "ipg", "per"; + }; + gpio3: gpio@53fa4000 { compatible = "fsl,imx35-gpio", "fsl,imx31-gpio"; reg = <0x53fa4000 0x4000>; diff --git a/dts/src/arm/imx50.dtsi b/dts/src/arm/imx50.dtsi index 6a201cf543..c0e0f60ab6 100644 --- a/dts/src/arm/imx50.dtsi +++ b/dts/src/arm/imx50.dtsi @@ -151,8 +151,10 @@ reg = <0x50014000 0x4000>; interrupts = <30>; clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>; + dmas = <&sdma 24 1 0>, + <&sdma 25 1 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; @@ -457,8 +459,10 @@ reg = <0x63fcc000 0x4000>; interrupts = <29>; clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>; + dmas = <&sdma 28 0 0>, + <&sdma 29 0 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; diff --git a/dts/src/arm/imx51-babbage.dts b/dts/src/arm/imx51-babbage.dts index 181d77fa2f..56569cecaa 100644 --- a/dts/src/arm/imx51-babbage.dts +++ b/dts/src/arm/imx51-babbage.dts @@ -203,6 +203,7 @@ reg = <0>; interrupt-parent = <&gpio1>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-rtc; regulators { sw1_reg: sw1 { @@ -392,7 +393,6 @@ }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/dts/src/arm/imx51-eukrea-mbimxsd51-baseboard.dts b/dts/src/arm/imx51-eukrea-mbimxsd51-baseboard.dts index 31cfb7f2b0..34599c5474 100644 --- a/dts/src/arm/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/dts/src/arm/imx51-eukrea-mbimxsd51-baseboard.dts @@ -255,7 +255,6 @@ &ssi2 { codec-handle = <&tlv320aic23>; - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/dts/src/arm/imx51.dtsi b/dts/src/arm/imx51.dtsi index bebbf3ba0d..17c05a6fa7 100644 --- a/dts/src/arm/imx51.dtsi +++ b/dts/src/arm/imx51.dtsi @@ -218,7 +218,6 @@ <&sdma 25 1 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; @@ -508,7 +507,6 @@ <&sdma 29 0 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; @@ -564,7 +562,6 @@ <&sdma 47 0 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; diff --git a/dts/src/arm/imx53-m53.dtsi b/dts/src/arm/imx53-m53.dtsi new file mode 100644 index 0000000000..87a7fc709c --- /dev/null +++ b/dts/src/arm/imx53-m53.dtsi @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2014 Marek Vasut <marex@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx53.dtsi" + +/ { + model = "DENX M53"; + compatible = "denx,imx53-m53", "fsl,imx53"; + + memory { + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p2v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "3P2V"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + }; + + reg_backlight: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "lcd-supply"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <400000>; + status = "okay"; + + stmpe610@41 { + compatible = "st,stmpe610"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + id = <0>; + blocks = <0x5>; + interrupts = <6 0x0>; + interrupt-parent = <&gpio7>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + reg = <0>; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <3>; + st,touch-det-delay = <3>; + st,settling = <4>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + pagesize = <32>; + }; + + rtc: rtc@68 { + compatible = "stm,m41t62"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx53-m53evk { + pinctrl_hog: hoggrp { + fsl,pins = < + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 + MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000 + MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000 + >; + }; + + pinctrl_nand: nandgrp { + fsl,pins = < + MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 + MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 + MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 + MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 + MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 + MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 + MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 + MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4 + MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4 + MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4 + MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4 + MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4 + MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4 + MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4 + MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4 + >; + }; + }; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + status = "okay"; +}; diff --git a/dts/src/arm/imx53-m53evk.dts b/dts/src/arm/imx53-m53evk.dts index c4956b0ffb..d0e0f57eb4 100644 --- a/dts/src/arm/imx53-m53evk.dts +++ b/dts/src/arm/imx53-m53evk.dts @@ -10,17 +10,12 @@ */ /dts-v1/; -#include "imx53.dtsi" +#include "imx53-m53.dtsi" / { model = "DENX M53EVK"; compatible = "denx,imx53-m53evk", "fsl,imx53"; - memory { - reg = <0x70000000 0x20000000>, - <0xb0000000 0x20000000>; - }; - display1: display@di1 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "bgr666"; @@ -81,25 +76,6 @@ #address-cells = <1>; #size-cells = <0>; - reg_3p2v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P2V"; - regulator-min-microvolt = <3200000>; - regulator-max-microvolt = <3200000>; - regulator-always-on; - }; - - - reg_backlight: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "lcd-supply"; - regulator-min-microvolt = <3200000>; - regulator-max-microvolt = <3200000>; - regulator-always-on; - }; - reg_usbh1_vbus: regulator@3 { compatible = "regulator-fixed"; reg = <3>; @@ -174,50 +150,6 @@ }; }; -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clock-frequency = <400000>; - status = "okay"; - - stmpe610@41 { - compatible = "st,stmpe610"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x41>; - id = <0>; - blocks = <0x5>; - interrupts = <6 0x0>; - interrupt-parent = <&gpio7>; - irq-trigger = <0x1>; - - stmpe_touchscreen { - compatible = "st,stmpe-ts"; - reg = <0>; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; - st,ave-ctrl = <3>; - st,touch-det-delay = <3>; - st,settling = <4>; - st,fraction-z = <7>; - st,i-drive = <1>; - }; - }; - - eeprom: eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - pagesize = <32>; - }; - - rtc: rtc@68 { - compatible = "stm,m41t62"; - reg = <0x68>; - }; -}; - &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; @@ -229,11 +161,8 @@ pinctrl-0 = <&pinctrl_hog>; imx53-m53evk { - pinctrl_hog: hoggrp { + pinctrl_usb: usbgrp { fsl,pins = < - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 - MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 - MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 MX53_PAD_GPIO_2__GPIO1_2 0x80000000 MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x80000000 >; @@ -302,13 +231,6 @@ >; }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000 - MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000 - >; - }; - pinctrl_i2c3: i2c3grp { fsl,pins = < MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 @@ -353,26 +275,6 @@ >; }; - pinctrl_nand: nandgrp { - fsl,pins = < - MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 - MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 - MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 - MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 - MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 - MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 - MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 - MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4 - MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4 - MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4 - MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4 - MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4 - MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4 - MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4 - MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4 - >; - }; - pinctrl_pwm1: pwm1grp { fsl,pins = < MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5 @@ -408,14 +310,6 @@ remote-endpoint = <&display1_in>; }; -&nfc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - status = "okay"; -}; - &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; @@ -427,7 +321,6 @@ }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; @@ -450,6 +343,8 @@ }; &usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb>; vbus-supply = <®_usbh1_vbus>; phy_type = "utmi"; status = "okay"; diff --git a/dts/src/arm/imx53-mba53.dts b/dts/src/arm/imx53-mba53.dts index 3e3f17aa93..2e44d2aba1 100644 --- a/dts/src/arm/imx53-mba53.dts +++ b/dts/src/arm/imx53-mba53.dts @@ -225,7 +225,6 @@ }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/dts/src/arm/imx53-qsb-common.dtsi b/dts/src/arm/imx53-qsb-common.dtsi index fd8c60dde7..181ae5ebf2 100644 --- a/dts/src/arm/imx53-qsb-common.dtsi +++ b/dts/src/arm/imx53-qsb-common.dtsi @@ -141,7 +141,6 @@ }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/dts/src/arm/imx53-tx53.dtsi b/dts/src/arm/imx53-tx53.dtsi index e348796ba6..704bd72cbf 100644 --- a/dts/src/arm/imx53-tx53.dtsi +++ b/dts/src/arm/imx53-tx53.dtsi @@ -502,7 +502,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; codec-handle = <&sgtl5000>; status = "okay"; }; diff --git a/dts/src/arm/imx53-voipac-bsb.dts b/dts/src/arm/imx53-voipac-bsb.dts index 7f6711a486..c17d3ad6db 100644 --- a/dts/src/arm/imx53-voipac-bsb.dts +++ b/dts/src/arm/imx53-voipac-bsb.dts @@ -154,6 +154,5 @@ }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/dts/src/arm/imx53.dtsi b/dts/src/arm/imx53.dtsi index 6456a00843..64fa27b36b 100644 --- a/dts/src/arm/imx53.dtsi +++ b/dts/src/arm/imx53.dtsi @@ -108,7 +108,7 @@ clocks = <&clks IMX5_CLK_SATA_GATE>, <&clks IMX5_CLK_SATA_REF>, <&clks IMX5_CLK_AHB>; - clock-names = "sata_gate", "sata_ref", "ahb"; + clock-names = "sata", "sata_ref", "ahb"; status = "disabled"; }; @@ -231,7 +231,6 @@ <&sdma 25 1 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; @@ -260,6 +259,11 @@ }; }; + aipstz1: bridge@53f00000 { + compatible = "fsl,imx53-aipstz"; + reg = <0x53f00000 0x60>; + }; + usbphy0: usbphy@0 { compatible = "usb-nop-xceiv"; clocks = <&clks IMX5_CLK_USB_PHY1_GATE>; @@ -572,6 +576,11 @@ reg = <0x60000000 0x10000000>; ranges; + aipstz2: bridge@63f00000 { + compatible = "fsl,imx53-aipstz"; + reg = <0x63f00000 0x60>; + }; + iim: iim@63f98000 { compatible = "fsl,imx53-iim", "fsl,imx27-iim"; reg = <0x63f98000 0x4000>; @@ -661,7 +670,6 @@ <&sdma 29 0 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; @@ -689,7 +697,6 @@ <&sdma 47 0 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; diff --git a/dts/src/arm/imx6dl-aristainetos_4.dts b/dts/src/arm/imx6dl-aristainetos_4.dts new file mode 100644 index 0000000000..9cd06e5e59 --- /dev/null +++ b/dts/src/arm/imx6dl-aristainetos_4.dts @@ -0,0 +1,85 @@ +/* + * support fot the imx6 based aristainetos board + * + * Copyright (C) 2014 Heiko Schocher <hs@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-aristainetos.dtsi" + +/ { + model = "aristainetos i.MX6 Dual Lite Board 4"; + compatible = "fsl,imx6dl"; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + status = "okay"; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + soc { + display0: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp>; + status = "okay"; + + display-timings { + 480x800p60 { + native-mode; + clock-frequency = <30000000>; + hactive = <480>; + vactive = <800>; + hfront-porch = <59>; + hback-porch = <10>; + hsync-len = <10>; + vback-porch = <15>; + vfront-porch = <15>; + vsync-len = <15>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + }; + }; +}; + +&ecspi2 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; diff --git a/dts/src/arm/imx6dl-aristainetos_7.dts b/dts/src/arm/imx6dl-aristainetos_7.dts new file mode 100644 index 0000000000..b413e24288 --- /dev/null +++ b/dts/src/arm/imx6dl-aristainetos_7.dts @@ -0,0 +1,74 @@ +/* + * support fot the imx6 based aristainetos board + * + * Copyright (C) 2014 Heiko Schocher <hs@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-aristainetos.dtsi" + +/ { + model = "aristainetos i.MX6 Dual Lite Board 7"; + compatible = "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + soc { + display0: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp>; + status = "okay"; + + display-timings { + 800x480p60 { + native-mode; + clock-frequency = <33246000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <88>; + hback-porch = <88>; + hsync-len = <80>; + vback-porch = <10>; + vfront-porch = <10>; + vsync-len = <25>; + vsync-active = <1>; + }; + }; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 3000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; diff --git a/dts/src/arm/imx6dl-gw51xx.dts b/dts/src/arm/imx6dl-gw51xx.dts index 4bd055f4c9..b2bd022fc6 100644 --- a/dts/src/arm/imx6dl-gw51xx.dts +++ b/dts/src/arm/imx6dl-gw51xx.dts @@ -14,6 +14,6 @@ #include "imx6qdl-gw51xx.dtsi" / { - model = "Gateworks Ventana i.MX6 DualLite GW51XX"; + model = "Gateworks Ventana i.MX6 DualLite/Solo GW51XX"; compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl"; }; diff --git a/dts/src/arm/imx6dl-gw52xx.dts b/dts/src/arm/imx6dl-gw52xx.dts index c9136058f1..a2e0b73fdd 100644 --- a/dts/src/arm/imx6dl-gw52xx.dts +++ b/dts/src/arm/imx6dl-gw52xx.dts @@ -14,6 +14,6 @@ #include "imx6qdl-gw52xx.dtsi" / { - model = "Gateworks Ventana i.MX6 DualLite GW52XX"; + model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX"; compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl"; }; diff --git a/dts/src/arm/imx6dl-gw53xx.dts b/dts/src/arm/imx6dl-gw53xx.dts index 61818a14fd..6844b708d2 100644 --- a/dts/src/arm/imx6dl-gw53xx.dts +++ b/dts/src/arm/imx6dl-gw53xx.dts @@ -14,6 +14,6 @@ #include "imx6qdl-gw53xx.dtsi" / { - model = "Gateworks Ventana i.MX6 DualLite GW53XX"; + model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX"; compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl"; }; diff --git a/dts/src/arm/imx6dl-gw54xx.dts b/dts/src/arm/imx6dl-gw54xx.dts index ab38b6770a..be915412f8 100644 --- a/dts/src/arm/imx6dl-gw54xx.dts +++ b/dts/src/arm/imx6dl-gw54xx.dts @@ -14,6 +14,6 @@ #include "imx6qdl-gw54xx.dtsi" / { - model = "Gateworks Ventana i.MX6 DualLite GW54XX"; + model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX"; compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl"; }; diff --git a/dts/src/arm/imx6dl-rex-basic.dts b/dts/src/arm/imx6dl-rex-basic.dts new file mode 100644 index 0000000000..b13845c282 --- /dev/null +++ b/dts/src/arm/imx6dl-rex-basic.dts @@ -0,0 +1,30 @@ +/* + * Copyright 2014 FEDEVEL, Inc. + * + * Author: Robert Nelson <robertcnelson@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-rex.dtsi" + +/ { + model = "Rex Basic i.MX6 Dual Lite Board"; + compatible = "rex,imx6dl-rex-basic", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x20000000>; + }; +}; + +&ecspi3 { + flash: m25p80@0 { + compatible = "sst,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; diff --git a/dts/src/arm/imx6dl-riotboard.dts b/dts/src/arm/imx6dl-riotboard.dts index 909fafc0b6..43cb3fd76b 100644 --- a/dts/src/arm/imx6dl-riotboard.dts +++ b/dts/src/arm/imx6dl-riotboard.dts @@ -254,7 +254,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; @@ -335,10 +334,10 @@ imx6-riotboard { pinctrl_audmux: audmuxgrp { fsl,pins = < - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x8000000 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x8000000 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x8000000 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x8000000 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */ >; }; @@ -376,7 +375,7 @@ fsl,pins = < MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 @@ -389,9 +388,9 @@ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 /* AR8035 pin strapping: MODE#1: pull up */ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 /* AR8035 pin strapping: MODE#3: pull up */ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */ - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 /* GPIO16 -> AR8035 25MHz */ + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 /* GPIO16 -> AR8035 25MHz */ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* AR8035 interrupt */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0 /* AR8035 interrupt */ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 >; }; @@ -426,8 +425,8 @@ pinctrl_led: ledgrp { fsl,pins = < - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* user led0 */ - MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x80000000 /* user led1 */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* user led0 */ + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b1 /* user led1 */ >; }; @@ -493,8 +492,8 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */ - MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x80000000 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */ + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 >; }; @@ -506,8 +505,8 @@ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 /* SD2 CD */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* SD2 WP */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* SD2 CD */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1f0b0 /* SD2 WP */ >; }; @@ -519,8 +518,8 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3 CD */ - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x80000000 /* SD3 WP */ + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* SD3 CD */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* SD3 WP */ >; }; @@ -532,7 +531,7 @@ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 - MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x80000000 /* SD4 RST (eMMC) */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x17059 /* SD4 RST (eMMC) */ >; }; }; diff --git a/dts/src/arm/imx6dl-tx6dl-comtft.dts b/dts/src/arm/imx6dl-tx6dl-comtft.dts new file mode 100644 index 0000000000..913bb9a046 --- /dev/null +++ b/dts/src/arm/imx6dl-tx6dl-comtft.dts @@ -0,0 +1,103 @@ +/* + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6DL Module on CoMpact TFT"; + compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_3v3>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + native-mode = <&ET070001DM6>; + + ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&can1 { + status = "disabled"; +}; + +&can2 { + xceiver-supply = <®_3v3>; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&kpp { + status = "disabled"; +}; + +®_can_xcvr { + status = "disabled"; +}; + +&touchscreen { + status = "disabled"; +}; diff --git a/dts/src/arm/imx6dl-tx6u-801x.dts b/dts/src/arm/imx6dl-tx6u-801x.dts new file mode 100644 index 0000000000..5fe465c281 --- /dev/null +++ b/dts/src/arm/imx6dl-tx6u-801x.dts @@ -0,0 +1,177 @@ +/* + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-801x Module"; + compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + power-supply = <®_3v3>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; diff --git a/dts/src/arm/imx6dl-tx6u-811x.dts b/dts/src/arm/imx6dl-tx6u-811x.dts new file mode 100644 index 0000000000..c275eecc94 --- /dev/null +++ b/dts/src/arm/imx6dl-tx6u-811x.dts @@ -0,0 +1,150 @@ +/* + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-811x Module"; + compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; + + aliases { + display = &lvds0; + lvds0 = &lvds0; + lvds1 = &lvds1; + }; + + backlight0: backlight0 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_lcd0_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + backlight1: backlight1 { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 0>; + power-supply = <®_lcd1_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; +}; + +&i2c3 { + polytouch2: eeti@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eeti>; + interrupt-parent = <&gpio3>; + interrupts = <22 0>; + wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + linux,wakeup; + }; +}; + +&iomuxc { + imx6dl-tx6u-811x { + pinctrl_eeti: eetigrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ + >; + }; + }; +}; + +&kpp { + status = "disabled"; /* pad conflict with backlight1 PWM */ +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&lvds_timing0>; + lvds_timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + + lvds1: lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "disabled"; + + display-timings { + native-mode = <&lvds_timing1>; + lvds_timing1: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; diff --git a/dts/src/arm/imx6dl-wandboard-revb1.dts b/dts/src/arm/imx6dl-wandboard-revb1.dts new file mode 100644 index 0000000000..f607d4f1d2 --- /dev/null +++ b/dts/src/arm/imx6dl-wandboard-revb1.dts @@ -0,0 +1,22 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-wandboard-revb1.dtsi" + +/ { + model = "Wandboard i.MX6 Dual Lite Board"; + compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x40000000>; + }; +}; diff --git a/dts/src/arm/imx6dl-wandboard.dts b/dts/src/arm/imx6dl-wandboard.dts index e672891c16..bbb6167230 100644 --- a/dts/src/arm/imx6dl-wandboard.dts +++ b/dts/src/arm/imx6dl-wandboard.dts @@ -10,7 +10,7 @@ */ /dts-v1/; #include "imx6dl.dtsi" -#include "imx6qdl-wandboard.dtsi" +#include "imx6qdl-wandboard-revc1.dtsi" / { model = "Wandboard i.MX6 Dual Lite Board"; diff --git a/dts/src/arm/imx6dl.dtsi b/dts/src/arm/imx6dl.dtsi index 0a9c49d69d..b453e0e28a 100644 --- a/dts/src/arm/imx6dl.dtsi +++ b/dts/src/arm/imx6dl.dtsi @@ -35,8 +35,11 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ - clocks = <&clks 104>, <&clks 6>, <&clks 16>, - <&clks 17>, <&clks 170>; + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; clock-names = "arm", "pll2_pfd2_396m", "step", "pll1_sw", "pll1_sys"; arm-supply = <®_arm>; @@ -56,7 +59,7 @@ ocram: sram@00900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; - clocks = <&clks 142>; + clocks = <&clks IMX6QDL_CLK_OCRAM>; }; aips1: aips-bus@02000000 { @@ -87,7 +90,7 @@ compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021f8000 0x4000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 116>; + clocks = <&clks IMX6DL_CLK_I2C4>; status = "disabled"; }; }; @@ -104,9 +107,9 @@ }; &ldb { - clocks = <&clks 33>, <&clks 34>, - <&clks 39>, <&clks 40>, - <&clks 135>, <&clks 136>; + clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, + <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>; clock-names = "di0_pll", "di1_pll", "di0_sel", "di1_sel", "di0", "di1"; diff --git a/dts/src/arm/imx6q-cubox-i.dts b/dts/src/arm/imx6q-cubox-i.dts index bc5f31e3e8..9efd8b0c80 100644 --- a/dts/src/arm/imx6q-cubox-i.dts +++ b/dts/src/arm/imx6q-cubox-i.dts @@ -13,4 +13,8 @@ &sata { status = "okay"; + fsl,transmit-level-mV = <1104>; + fsl,transmit-boost-mdB = <0>; + fsl,transmit-atten-16ths = <9>; + fsl,no-spread-spectrum; }; diff --git a/dts/src/arm/imx6q-dmo-edmqmx6.dts b/dts/src/arm/imx6q-dmo-edmqmx6.dts index e0302636af..8c1cb53464 100644 --- a/dts/src/arm/imx6q-dmo-edmqmx6.dts +++ b/dts/src/arm/imx6q-dmo-edmqmx6.dts @@ -95,6 +95,12 @@ }; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + &ecspi5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi5>; @@ -118,6 +124,13 @@ status = "okay"; }; +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -274,6 +287,13 @@ }; }; +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -286,6 +306,13 @@ >; }; + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + >; + }; + pinctrl_ecspi5: ecspi5rp-1 { fsl,pins = < MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000 @@ -316,6 +343,13 @@ >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 @@ -323,6 +357,19 @@ >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x100b1 + >; + }; + pinctrl_pfuze: pfuze100grp1 { fsl,pins = < MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000 @@ -385,6 +432,13 @@ }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 8 0>; + status = "okay"; +}; + &sata { status = "okay"; }; diff --git a/dts/src/arm/imx6q-gw51xx.dts b/dts/src/arm/imx6q-gw51xx.dts index 0e1406e58e..8e8bcd8fe0 100644 --- a/dts/src/arm/imx6q-gw51xx.dts +++ b/dts/src/arm/imx6q-gw51xx.dts @@ -14,6 +14,6 @@ #include "imx6qdl-gw51xx.dtsi" / { - model = "Gateworks Ventana i.MX6 Quad GW51XX"; + model = "Gateworks Ventana i.MX6 Dual/Quad GW51XX"; compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q"; }; diff --git a/dts/src/arm/imx6q-gw52xx.dts b/dts/src/arm/imx6q-gw52xx.dts index 5f71ddbc7f..a12c47e5ee 100644 --- a/dts/src/arm/imx6q-gw52xx.dts +++ b/dts/src/arm/imx6q-gw52xx.dts @@ -14,7 +14,7 @@ #include "imx6qdl-gw52xx.dtsi" / { - model = "Gateworks Ventana i.MX6 Quad GW52XX"; + model = "Gateworks Ventana i.MX6 Dual/Quad GW52XX"; compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q"; }; diff --git a/dts/src/arm/imx6q-gw53xx.dts b/dts/src/arm/imx6q-gw53xx.dts index 360c316b47..d76aaa83da 100644 --- a/dts/src/arm/imx6q-gw53xx.dts +++ b/dts/src/arm/imx6q-gw53xx.dts @@ -14,7 +14,7 @@ #include "imx6qdl-gw53xx.dtsi" / { - model = "Gateworks Ventana i.MX6 Quad GW53XX"; + model = "Gateworks Ventana i.MX6 Dual/Quad GW53XX"; compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q"; }; diff --git a/dts/src/arm/imx6q-gw5400-a.dts b/dts/src/arm/imx6q-gw5400-a.dts index 3689eaa588..22e6f8e657 100644 --- a/dts/src/arm/imx6q-gw5400-a.dts +++ b/dts/src/arm/imx6q-gw5400-a.dts @@ -115,9 +115,9 @@ }; sound { - compatible = "fsl,imx6q-sabrelite-sgtl5000", + compatible = "fsl,imx6q-ventana-sgtl5000", "fsl,imx-audio-sgtl5000"; - model = "imx6q-sabrelite-sgtl5000"; + model = "sgtl5000-audio"; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = @@ -504,7 +504,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/dts/src/arm/imx6q-gw54xx.dts b/dts/src/arm/imx6q-gw54xx.dts index ab518d66a7..6e8f53e92a 100644 --- a/dts/src/arm/imx6q-gw54xx.dts +++ b/dts/src/arm/imx6q-gw54xx.dts @@ -14,7 +14,7 @@ #include "imx6qdl-gw54xx.dtsi" / { - model = "Gateworks Ventana i.MX6 Quad GW54XX"; + model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX"; compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q"; }; diff --git a/dts/src/arm/imx6q-rex-pro.dts b/dts/src/arm/imx6q-rex-pro.dts new file mode 100644 index 0000000000..3c2852b16f --- /dev/null +++ b/dts/src/arm/imx6q-rex-pro.dts @@ -0,0 +1,34 @@ +/* + * Copyright 2014 FEDEVEL, Inc. + * + * Author: Robert Nelson <robertcnelson@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-rex.dtsi" + +/ { + model = "Rex Pro i.MX6 Quad Board"; + compatible = "rex,imx6q-rex-pro", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +&ecspi3 { + flash: m25p80@0 { + compatible = "sst,sst25vf032b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&sata { + status = "okay"; +}; diff --git a/dts/src/arm/imx6q-tx6q-1010-comtft.dts b/dts/src/arm/imx6q-tx6q-1010-comtft.dts new file mode 100644 index 0000000000..b18fae10b2 --- /dev/null +++ b/dts/src/arm/imx6q-tx6q-1010-comtft.dts @@ -0,0 +1,103 @@ +/* + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT"; + compatible = "karo,imx6q-tx6q", "fsl,imx6q"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_3v3>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + native-mode = <&ET070001DM6>; + + ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&can1 { + status = "disabled"; +}; + +&can2 { + xceiver-supply = <®_3v3>; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&kpp { + status = "disabled"; +}; + +®_can_xcvr { + status = "disabled"; +}; + +&touchscreen { + status = "disabled"; +}; diff --git a/dts/src/arm/imx6q-tx6q-1010.dts b/dts/src/arm/imx6q-tx6q-1010.dts new file mode 100644 index 0000000000..b58ec9c966 --- /dev/null +++ b/dts/src/arm/imx6q-tx6q-1010.dts @@ -0,0 +1,177 @@ +/* + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1010 Module"; + compatible = "karo,imx6q-tx6q", "fsl,imx6q"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + power-supply = <®_3v3>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; diff --git a/dts/src/arm/imx6q-tx6q-1020-comtft.dts b/dts/src/arm/imx6q-tx6q-1020-comtft.dts new file mode 100644 index 0000000000..0bb9a9de62 --- /dev/null +++ b/dts/src/arm/imx6q-tx6q-1020-comtft.dts @@ -0,0 +1,136 @@ +/* + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT"; + compatible = "karo,imx6q-tx6q", "fsl,imx6q"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_3v3>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + native-mode = <&ET070001DM6>; + + ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&can1 { + status = "disabled"; +}; + +&can2 { + xceiver-supply = <®_3v3>; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&iomuxc { + imx6qdl-tx6 { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&kpp { + status = "disabled"; +}; + +®_can_xcvr { + status = "disabled"; +}; + +&touchscreen { + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; diff --git a/dts/src/arm/imx6q-tx6q-1020.dts b/dts/src/arm/imx6q-tx6q-1020.dts new file mode 100644 index 0000000000..b96d80a35d --- /dev/null +++ b/dts/src/arm/imx6q-tx6q-1020.dts @@ -0,0 +1,210 @@ +/* + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1020 Module"; + compatible = "karo,imx6q-tx6q", "fsl,imx6q"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + power-supply = <®_3v3>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&iomuxc { + imx6qdl-tx6 { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; diff --git a/dts/src/arm/imx6q-tx6q-1110.dts b/dts/src/arm/imx6q-tx6q-1110.dts new file mode 100644 index 0000000000..88aa1e4c79 --- /dev/null +++ b/dts/src/arm/imx6q-tx6q-1110.dts @@ -0,0 +1,154 @@ +/* + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1110 Module"; + compatible = "karo,imx6q-tx6q", "fsl,imx6q"; + + aliases { + display = &lvds0; + lvds0 = &lvds0; + lvds1 = &lvds1; + }; + + backlight0: backlight0 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_lcd0_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + backlight1: backlight1 { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 0>; + power-supply = <®_lcd1_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; +}; + +&i2c3 { + polytouch1: eeti@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eeti>; + interrupt-parent = <&gpio3>; + interrupts = <22 0>; + wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + linux,wakeup; + }; +}; + +&iomuxc { + imx6q-tx6q-1110 { + pinctrl_eeti: eetigrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ + >; + }; + }; +}; + +&kpp { + status = "disabled"; /* pad conflict with backlight1 PWM */ +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&lvds_timing0>; + lvds_timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + + lvds1: lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "disabled"; + + display-timings { + native-mode = <&lvds_timing1>; + lvds_timing1: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; diff --git a/dts/src/arm/imx6q-udoo.dts b/dts/src/arm/imx6q-udoo.dts index 6c561060bf..e3bff2ac00 100644 --- a/dts/src/arm/imx6q-udoo.dts +++ b/dts/src/arm/imx6q-udoo.dts @@ -23,6 +23,23 @@ memory { reg = <0x10000000 0x40000000>; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_h1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ + gpio = <&gpio7 12 0>; + }; + }; }; &fec { @@ -81,6 +98,13 @@ >; }; + pinctrl_usbh: usbhgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -104,6 +128,14 @@ status = "okay"; }; +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh>; + vbus-supply = <®_usb_h1_vbus>; + clocks = <&clks 201>; + status = "okay"; +}; + &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; diff --git a/dts/src/arm/imx6q-wandboard-revb1.dts b/dts/src/arm/imx6q-wandboard-revb1.dts new file mode 100644 index 0000000000..20bf3c2826 --- /dev/null +++ b/dts/src/arm/imx6q-wandboard-revb1.dts @@ -0,0 +1,26 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-wandboard-revb1.dtsi" + +/ { + model = "Wandboard i.MX6 Quad Board"; + compatible = "wand,imx6q-wandboard", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +&sata { + status = "okay"; +}; diff --git a/dts/src/arm/imx6q-wandboard.dts b/dts/src/arm/imx6q-wandboard.dts index 36be17f207..4a8a6ee13e 100644 --- a/dts/src/arm/imx6q-wandboard.dts +++ b/dts/src/arm/imx6q-wandboard.dts @@ -10,7 +10,7 @@ */ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-wandboard.dtsi" +#include "imx6qdl-wandboard-revc1.dtsi" / { model = "Wandboard i.MX6 Quad Board"; diff --git a/dts/src/arm/imx6q.dtsi b/dts/src/arm/imx6q.dtsi index addd3f881c..e9f3646d17 100644 --- a/dts/src/arm/imx6q.dtsi +++ b/dts/src/arm/imx6q.dtsi @@ -43,8 +43,11 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ - clocks = <&clks 104>, <&clks 6>, <&clks 16>, - <&clks 17>, <&clks 170>; + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; clock-names = "arm", "pll2_pfd2_396m", "step", "pll1_sw", "pll1_sys"; arm-supply = <®_arm>; @@ -78,7 +81,7 @@ ocram: sram@00900000 { compatible = "mmio-sram"; reg = <0x00900000 0x40000>; - clocks = <&clks 142>; + clocks = <&clks IMX6QDL_CLK_OCRAM>; }; aips-bus@02000000 { /* AIPS1 */ @@ -89,7 +92,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02018000 0x4000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 116>, <&clks 116>; + clocks = <&clks IMX6Q_CLK_ECSPI5>, + <&clks IMX6Q_CLK_ECSPI5>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -140,7 +144,9 @@ compatible = "fsl,imx6q-ahci"; reg = <0x02200000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 154>, <&clks 187>, <&clks 105>; + clocks = <&clks IMX6QDL_CLK_SATA>, + <&clks IMX6QDL_CLK_SATA_REF_100M>, + <&clks IMX6QDL_CLK_AHB>; clock-names = "sata", "sata_ref", "ahb"; status = "disabled"; }; @@ -152,10 +158,20 @@ reg = <0x02800000 0x400000>; interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 133>, <&clks 134>, <&clks 137>; + clocks = <&clks IMX6QDL_CLK_IPU2>, + <&clks IMX6QDL_CLK_IPU2_DI0>, + <&clks IMX6QDL_CLK_IPU2_DI1>; clock-names = "bus", "di0", "di1"; resets = <&src 4>; + ipu2_csi0: port@0 { + reg = <0>; + }; + + ipu2_csi1: port@1 { + reg = <1>; + }; + ipu2_di0: port@2 { #address-cells = <1>; #size-cells = <0>; @@ -230,9 +246,10 @@ }; &ldb { - clocks = <&clks 33>, <&clks 34>, - <&clks 39>, <&clks 40>, <&clks 41>, <&clks 42>, - <&clks 135>, <&clks 136>; + clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>, + <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>; clock-names = "di0_pll", "di1_pll", "di0_sel", "di1_sel", "di2_sel", "di3_sel", "di0", "di1"; diff --git a/dts/src/arm/imx6qdl-aristainetos.dtsi b/dts/src/arm/imx6qdl-aristainetos.dtsi new file mode 100644 index 0000000000..e6d9195a1d --- /dev/null +++ b/dts/src/arm/imx6qdl-aristainetos.dtsi @@ -0,0 +1,418 @@ +/* + * support fot the imx6 based aristainetos board + * + * Copyright (C) 2014 Heiko Schocher <hs@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_2p5v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: regulator@2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: regulator@3 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + tmp103: tmp103@71 { + compatible = "ti,tmp103"; + reg = <0x71>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + rtc@68 { + compatible = "dallas,m41t00"; + reg = <0x68>; + }; +}; + +&ecspi4 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 20 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usbotg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + vmmc-supply = <®_3p3v>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vmmc-supply = <®_3p3v>; + cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog &pinctrl_gpio>; + + imx6qdl-aristainetos { + pinctrl_aristainetos_usbh1_vbus: aristainetos-usbh1-vbus { + fsl,pins = <MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0>; + }; + + pinctrl_aristainetos_usbotg_vbus: aristainetos-usbotg-vbus { + fsl,pins = <MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0>; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 + >; + }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0 + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x100b1 + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b1 + MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 + MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0 + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x10 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu_disp: ipudisp1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x20000 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 + >; + }; + }; +}; diff --git a/dts/src/arm/imx6qdl-gw52xx.dtsi b/dts/src/arm/imx6qdl-gw52xx.dtsi index 744c8a2d81..234e7b7552 100644 --- a/dts/src/arm/imx6qdl-gw52xx.dtsi +++ b/dts/src/arm/imx6qdl-gw52xx.dtsi @@ -121,9 +121,9 @@ }; sound { - compatible = "fsl,imx6q-sabrelite-sgtl5000", + compatible = "fsl,imx6q-ventana-sgtl5000", "fsl,imx-audio-sgtl5000"; - model = "imx6q-sabrelite-sgtl5000"; + model = "sgtl5000-audio"; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = @@ -489,7 +489,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/dts/src/arm/imx6qdl-gw53xx.dtsi b/dts/src/arm/imx6qdl-gw53xx.dtsi index adf150c1be..143f84f781 100644 --- a/dts/src/arm/imx6qdl-gw53xx.dtsi +++ b/dts/src/arm/imx6qdl-gw53xx.dtsi @@ -124,9 +124,9 @@ }; sound { - compatible = "fsl,imx6q-sabrelite-sgtl5000", + compatible = "fsl,imx6q-ventana-sgtl5000", "fsl,imx-audio-sgtl5000"; - model = "imx6q-sabrelite-sgtl5000"; + model = "sgtl5000-audio"; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = @@ -533,7 +533,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/dts/src/arm/imx6qdl-gw54xx.dtsi b/dts/src/arm/imx6qdl-gw54xx.dtsi index 698d3063b2..16e7ad3d98 100644 --- a/dts/src/arm/imx6qdl-gw54xx.dtsi +++ b/dts/src/arm/imx6qdl-gw54xx.dtsi @@ -114,9 +114,9 @@ }; sound { - compatible = "fsl,imx6q-sabrelite-sgtl5000", + compatible = "fsl,imx6q-ventana-sgtl5000", "fsl,imx-audio-sgtl5000"; - model = "imx6q-sabrelite-sgtl5000"; + model = "sgtl5000-audio"; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = @@ -555,12 +555,10 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/dts/src/arm/imx6qdl-nitrogen6x.dtsi b/dts/src/arm/imx6qdl-nitrogen6x.dtsi index 4c4b17596c..42ff525ebe 100644 --- a/dts/src/arm/imx6qdl-nitrogen6x.dtsi +++ b/dts/src/arm/imx6qdl-nitrogen6x.dtsi @@ -381,7 +381,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/dts/src/arm/imx6qdl-phytec-pfla02.dtsi b/dts/src/arm/imx6qdl-phytec-pfla02.dtsi index faa3494a69..2694aa84e1 100644 --- a/dts/src/arm/imx6qdl-phytec-pfla02.dtsi +++ b/dts/src/arm/imx6qdl-phytec-pfla02.dtsi @@ -301,6 +301,7 @@ pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + phy-supply = <&vdd_eth_io_reg>; status = "disabled"; }; diff --git a/dts/src/arm/imx6qdl-rex.dtsi b/dts/src/arm/imx6qdl-rex.dtsi new file mode 100644 index 0000000000..df7bcf86c1 --- /dev/null +++ b/dts/src/arm/imx6qdl-rex.dtsi @@ -0,0 +1,357 @@ +/* + * Copyright 2014 FEDEVEL, Inc. + * + * Author: Robert Nelson <robertcnelson@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart1; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p3v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + led0: usr { + label = "usr"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + }; + + sound { + compatible = "fsl,imx6-rex-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6-rex-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&ecspi2 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&ecspi3 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@57 { + compatible = "at,24c02"; + reg = <0x57>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-rex { + pinctrl_hog: hoggrp { + fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x000b1 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + /* user led */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + /* power enable, high active */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x10b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x10b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + /* CD */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* WP */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1f0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + /* CD */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + /* WP */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1f0b0 + >; + }; + }; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/dts/src/arm/imx6qdl-sabrelite.dtsi b/dts/src/arm/imx6qdl-sabrelite.dtsi index 6df6127bf8..0a36129152 100644 --- a/dts/src/arm/imx6qdl-sabrelite.dtsi +++ b/dts/src/arm/imx6qdl-sabrelite.dtsi @@ -381,7 +381,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/dts/src/arm/imx6qdl-sabresd.dtsi b/dts/src/arm/imx6qdl-sabresd.dtsi index 40ea365346..ec43dde785 100644 --- a/dts/src/arm/imx6qdl-sabresd.dtsi +++ b/dts/src/arm/imx6qdl-sabresd.dtsi @@ -340,6 +340,7 @@ MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 >; }; @@ -512,7 +513,6 @@ }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/dts/src/arm/imx6qdl-tx6.dtsi b/dts/src/arm/imx6qdl-tx6.dtsi new file mode 100644 index 0000000000..f02b80b41d --- /dev/null +++ b/dts/src/arm/imx6qdl-tx6.dtsi @@ -0,0 +1,696 @@ +/* + * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + can0 = &can2; + can1 = &can1; + ethernet0 = &fec; + lcdif_23bit_pins_a = &pinctrl_disp0_1; + lcdif_24bit_pins_a = &pinctrl_disp0_2; + pwm0 = &pwm1; + pwm1 = &pwm2; + reg_can_xcvr = ®_can_xcvr; + stk5led = &user_led; + usbotg = &usbotg; + sdhc0 = &usdhc1; + sdhc1 = &usdhc2; + }; + + memory { + reg = <0 0>; /* will be filled by U-Boot */ + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + mclk: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power Button"; + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + }; + + leds { + compatible = "gpio-leds"; + + user_led: user { + label = "Heartbeat"; + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3v3_etn: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "3V3_ETN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etnphy_power>; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_2v5: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3v3: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_can_xcvr: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan_xcvr>; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + enable-active-low; + }; + + reg_lcd0_pwr: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "LCD0 POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + }; + + reg_lcd1_pwr: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "LCD1 POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd1_pwr>; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + }; + + reg_usbh1_vbus: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg_vbus: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + + sound { + compatible = "karo,imx6qdl-tx6qdl-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "sgtl5000-audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <5>; + }; +}; + +&audmux { + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + fsl,spi-num-chipselects = <2>; + cs-gpios = < + &gpio2 30 GPIO_ACTIVE_HIGH + &gpio3 19 GPIO_ACTIVE_HIGH + >; + status = "okay"; + + spidev0: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <54000000>; + }; + + spidev1: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <54000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + phy-supply = <®_3v3_etn>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + fsl,no-blockmark-swap; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; + + ds1339: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <400000>; + status = "okay"; + + sgtl5000: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_2v5>; + VDDIO-supply = <®_3v3>; + clocks = <&mclk>; + }; + + polytouch: edt-ft5x06@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_edt_ft5x06>; + interrupt-parent = <&gpio6>; + interrupts = <15 0>; + reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + linux,wakeup; + }; + + touchscreen: tsc2007@48 { + compatible = "ti,tsc2007"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2007>; + interrupt-parent = <&gpio3>; + interrupts = <26 0>; + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + ti,x-plate-ohms = <660>; + linux,wakeup; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-tx6 { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */ + MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */ + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 /* SSI1_RXD */ + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 /* SSI1_TXD */ + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 /* SSI1_CLK */ + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 /* SSI1_FS */ + >; + }; + + pinctrl_disp0_1: disp0grp-1 { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + /* PAD DISP0_DAT0 is used for the Flexcan transceiver control */ + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_disp0_2: disp0grp-2 { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x0b0b0 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x0b0b0 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x0b0b0 + MX6QDL_PAD_GPIO_19__ECSPI1_RDY 0x0b0b0 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x0b0b0 /* SPI CS0 */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x0b0b0 /* SPI CS1 */ + >; + }; + + pinctrl_edt_ft5x06: edt-ft5x06grp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* Interrupt */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /* Reset */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 /* Wake */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + >; + }; + + pinctrl_etnphy_power: etnphy-pwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */ + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan_xcvr: flexcan-xcvrgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0 /* Flexcan XCVR enable */ + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_kpp: kppgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1 + MX6QDL_PAD_GPIO_4__KEY_COL7 0x1b0b1 + MX6QDL_PAD_KEY_COL2__KEY_COL2 0x1b0b1 + MX6QDL_PAD_KEY_COL3__KEY_COL3 0x1b0b1 + MX6QDL_PAD_GPIO_2__KEY_ROW6 0x1b0b1 + MX6QDL_PAD_GPIO_5__KEY_ROW7 0x1b0b1 + MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b1 + MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x1b0b1 + >; + }; + + pinctrl_lcd0_pwr: lcd0-pwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 /* LCD Reset */ + >; + }; + + pinctrl_lcd1_pwr: lcd1-pwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b1 /* LCD Power Enable */ + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_tsc2007: tsc2007grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 /* Interrupt */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart1_rtscts: uart1_rtsctsgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2_rtscts: uart2_rtsctsgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3_rtscts: uart3_rtsctsgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 /* USBH1_VBUSEN */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x17059 + >; + }; + + pinctrl_usbotg_vbus: usbotg-vbusgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* USBOTG_VBUSEN */ + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x070b1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x070b1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x070b1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x070b1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x070b1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x070b1 + MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x070b1 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x070b1 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x070b1 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x070b1 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x070b1 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x070b1 + MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x170b0 /* SD2 CD */ + >; + }; + }; +}; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + /* sample keymap */ + /* row/col 0,1 are mapped to KPP row/col 6,7 */ + linux,keymap = < + MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */ + MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */ + MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */ + MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */ + MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */ + MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */ + MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */ + MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */ + MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */ + MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */ + MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */ + >; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + #pwm-cells = <3>; + status = "disabled"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + #pwm-cells = <3>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usbotg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "peripheral"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + no-1-8-v; + cd-gpios = <&gpio7 2 0>; + fsl,wp-controller; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + no-1-8-v; + cd-gpios = <&gpio7 3 0>; + fsl,wp-controller; + status = "okay"; +}; diff --git a/dts/src/arm/imx6qdl-wandboard-revb1.dtsi b/dts/src/arm/imx6qdl-wandboard-revb1.dtsi new file mode 100644 index 0000000000..ef7fa62b98 --- /dev/null +++ b/dts/src/arm/imx6qdl-wandboard-revb1.dtsi @@ -0,0 +1,42 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include "imx6qdl-wandboard.dtsi" + +&iomuxc { + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-wandboard { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* GPIO_0_CLKO */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* uSDHC1 CD */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x0f0b0 /* WL_REF_ON */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x0f0b0 /* WL_RST_N */ + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x000b0 /* WL_REG_ON */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 /* RGMII_nRST */ + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x80000000 /* BT_ON */ + MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x80000000 /* BT_WAKE */ + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x80000000 /* BT_HOST_WAKE */ + >; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + non-removable; + status = "okay"; +}; diff --git a/dts/src/arm/imx6qdl-wandboard-revc1.dtsi b/dts/src/arm/imx6qdl-wandboard-revc1.dtsi new file mode 100644 index 0000000000..8d893a78cd --- /dev/null +++ b/dts/src/arm/imx6qdl-wandboard-revc1.dtsi @@ -0,0 +1,41 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include "imx6qdl-wandboard.dtsi" + +&iomuxc { + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-wandboard { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* GPIO_0_CLKO */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* uSDHC1 CD */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ + MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x0f0b0 /* WIFI_ON (reset, active low) */ + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x000b0 /* WL_REG_ON (unused) */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE, input */ + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x0f0b0 /* GPIO5_IO31 (Wifi Power Enable) */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE (unused) */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x80000000 /* BT_ON */ + MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x80000000 /* BT_WAKE */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x80000000 /* BT_HOST_WAKE */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 /* RGMII_nRST */ + >; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + status = "okay"; +}; diff --git a/dts/src/arm/imx6qdl-wandboard.dtsi b/dts/src/arm/imx6qdl-wandboard.dtsi index 5c6f10c43f..5fb0916755 100644 --- a/dts/src/arm/imx6qdl-wandboard.dtsi +++ b/dts/src/arm/imx6qdl-wandboard.dtsi @@ -91,22 +91,8 @@ &iomuxc { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; imx6qdl-wandboard { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 - MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 - MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x80000000 /* WL_REF_ON */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* WL_RST_N */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */ - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 - >; - }; pinctrl_audmux: audmuxgrp { fsl,pins = < @@ -233,7 +219,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; @@ -269,13 +254,6 @@ status = "okay"; }; -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - non-removable; - status = "okay"; -}; - &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; diff --git a/dts/src/arm/imx6qdl.dtsi b/dts/src/arm/imx6qdl.dtsi index ce0599134a..c701af9580 100644 --- a/dts/src/arm/imx6qdl.dtsi +++ b/dts/src/arm/imx6qdl.dtsi @@ -10,6 +10,7 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton.dtsi" @@ -94,7 +95,7 @@ interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; #dma-cells = <1>; dma-channels = <4>; - clocks = <&clks 106>; + clocks = <&clks IMX6QDL_CLK_APBH_DMA>; }; gpmi: gpmi-nand@00112000 { @@ -105,8 +106,11 @@ reg-names = "gpmi-nand", "bch"; interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "bch"; - clocks = <&clks 152>, <&clks 153>, <&clks 151>, - <&clks 150>, <&clks 149>; + clocks = <&clks IMX6QDL_CLK_GPMI_IO>, + <&clks IMX6QDL_CLK_GPMI_APB>, + <&clks IMX6QDL_CLK_GPMI_BCH>, + <&clks IMX6QDL_CLK_GPMI_BCH_APB>, + <&clks IMX6QDL_CLK_PER1_BCH>; clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch"; dmas = <&dma_apbh 0>; @@ -118,7 +122,7 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; interrupts = <1 13 0xf01>; - clocks = <&clks 15>; + clocks = <&clks IMX6QDL_CLK_TWD>; }; L2: l2-cache@00a02000 { @@ -149,7 +153,9 @@ <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 144>, <&clks 206>, <&clks 189>; + clocks = <&clks IMX6QDL_CLK_PCIE_AXI>, + <&clks IMX6QDL_CLK_LVDS1_GATE>, + <&clks IMX6QDL_CLK_PCIE_REF_125M>; clock-names = "pcie", "pcie_bus", "pcie_phy"; status = "disabled"; }; @@ -180,11 +186,11 @@ dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; dma-names = "rx", "tx"; - clocks = <&clks 197>, <&clks 3>, - <&clks 197>, <&clks 107>, - <&clks 0>, <&clks 118>, - <&clks 0>, <&clks 139>, - <&clks 0>; + clocks = <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_OSC>, + <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_DUMMY>, + <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>, + <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>, + <&clks IMX6QDL_CLK_DUMMY>; clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", "rxtx4", @@ -199,7 +205,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02008000 0x4000>; interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 112>, <&clks 112>; + clocks = <&clks IMX6QDL_CLK_ECSPI1>, + <&clks IMX6QDL_CLK_ECSPI1>; clock-names = "ipg", "per"; dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; dma-names = "rx", "tx"; @@ -212,7 +219,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x0200c000 0x4000>; interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 113>, <&clks 113>; + clocks = <&clks IMX6QDL_CLK_ECSPI2>, + <&clks IMX6QDL_CLK_ECSPI2>; clock-names = "ipg", "per"; dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; dma-names = "rx", "tx"; @@ -225,7 +233,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02010000 0x4000>; interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 114>, <&clks 114>; + clocks = <&clks IMX6QDL_CLK_ECSPI3>, + <&clks IMX6QDL_CLK_ECSPI3>; clock-names = "ipg", "per"; dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; dma-names = "rx", "tx"; @@ -238,7 +247,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02014000 0x4000>; interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 115>, <&clks 115>; + clocks = <&clks IMX6QDL_CLK_ECSPI4>, + <&clks IMX6QDL_CLK_ECSPI4>; clock-names = "ipg", "per"; dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; dma-names = "rx", "tx"; @@ -249,7 +259,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 160>, <&clks 161>; + clocks = <&clks IMX6QDL_CLK_UART_IPG>, + <&clks IMX6QDL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; dma-names = "rx", "tx"; @@ -263,46 +274,40 @@ ssi1: ssi@02028000 { compatible = "fsl,imx6q-ssi", - "fsl,imx51-ssi", - "fsl,imx21-ssi"; + "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 178>; + clocks = <&clks IMX6QDL_CLK_SSI1_IPG>; dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <38 37>; status = "disabled"; }; ssi2: ssi@0202c000 { compatible = "fsl,imx6q-ssi", - "fsl,imx51-ssi", - "fsl,imx21-ssi"; + "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 179>; + clocks = <&clks IMX6QDL_CLK_SSI2_IPG>; dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <42 41>; status = "disabled"; }; ssi3: ssi@02030000 { compatible = "fsl,imx6q-ssi", - "fsl,imx51-ssi", - "fsl,imx21-ssi"; + "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 180>; + clocks = <&clks IMX6QDL_CLK_SSI3_IPG>; dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <46 45>; status = "disabled"; }; @@ -331,7 +336,8 @@ compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 62>, <&clks 145>; + clocks = <&clks IMX6QDL_CLK_IPG>, + <&clks IMX6QDL_CLK_PWM1>; clock-names = "ipg", "per"; }; @@ -340,7 +346,8 @@ compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 62>, <&clks 146>; + clocks = <&clks IMX6QDL_CLK_IPG>, + <&clks IMX6QDL_CLK_PWM2>; clock-names = "ipg", "per"; }; @@ -349,7 +356,8 @@ compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 62>, <&clks 147>; + clocks = <&clks IMX6QDL_CLK_IPG>, + <&clks IMX6QDL_CLK_PWM3>; clock-names = "ipg", "per"; }; @@ -358,7 +366,8 @@ compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 62>, <&clks 148>; + clocks = <&clks IMX6QDL_CLK_IPG>, + <&clks IMX6QDL_CLK_PWM4>; clock-names = "ipg", "per"; }; @@ -366,7 +375,8 @@ compatible = "fsl,imx6q-flexcan"; reg = <0x02090000 0x4000>; interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 108>, <&clks 109>; + clocks = <&clks IMX6QDL_CLK_CAN1_IPG>, + <&clks IMX6QDL_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -375,7 +385,8 @@ compatible = "fsl,imx6q-flexcan"; reg = <0x02094000 0x4000>; interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 110>, <&clks 111>; + clocks = <&clks IMX6QDL_CLK_CAN2_IPG>, + <&clks IMX6QDL_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -384,7 +395,8 @@ compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 119>, <&clks 120>; + clocks = <&clks IMX6QDL_CLK_GPT_IPG>, + <&clks IMX6QDL_CLK_GPT_IPG_PER>; clock-names = "ipg", "per"; }; @@ -466,22 +478,25 @@ }; kpp: kpp@020b8000 { + compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_IPG>; + status = "disabled"; }; wdog1: wdog@020bc000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 0>; + clocks = <&clks IMX6QDL_CLK_DUMMY>; }; wdog2: wdog@020c0000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 0>; + clocks = <&clks IMX6QDL_CLK_DUMMY>; status = "disabled"; }; @@ -599,14 +614,14 @@ interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; fsl,tempmon = <&anatop>; fsl,tempmon-data = <&ocotp>; - clocks = <&clks 172>; + clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; }; usbphy1: usbphy@020c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 182>; + clocks = <&clks IMX6QDL_CLK_USBPHY1>; fsl,anatop = <&anatop>; }; @@ -614,7 +629,7 @@ compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 183>; + clocks = <&clks IMX6QDL_CLK_USBPHY2>; fsl,anatop = <&anatop>; }; @@ -727,7 +742,8 @@ reg = <0x00120000 0x9000>; interrupts = <0 115 0x04>; gpr = <&gpr>; - clocks = <&clks 123>, <&clks 124>; + clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>, + <&clks IMX6QDL_CLK_HDMI_ISFR>; clock-names = "iahb", "isfr"; status = "disabled"; @@ -762,7 +778,8 @@ compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 155>, <&clks 155>; + clocks = <&clks IMX6QDL_CLK_SDMA>, + <&clks IMX6QDL_CLK_SDMA>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; @@ -790,7 +807,7 @@ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 162>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc 0>; status = "disabled"; @@ -800,7 +817,7 @@ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 162>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbphy = <&usbphy2>; fsl,usbmisc = <&usbmisc 1>; status = "disabled"; @@ -810,7 +827,7 @@ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 162>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 2>; status = "disabled"; }; @@ -819,7 +836,7 @@ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184600 0x200>; interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 162>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 3>; status = "disabled"; }; @@ -828,7 +845,7 @@ #index-cells = <1>; compatible = "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; - clocks = <&clks 162>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; }; fec: ethernet@02188000 { @@ -837,7 +854,9 @@ interrupts-extended = <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 117>, <&clks 117>, <&clks 190>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET_REF>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; @@ -853,7 +872,9 @@ compatible = "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 163>, <&clks 163>, <&clks 163>; + clocks = <&clks IMX6QDL_CLK_USDHC1>, + <&clks IMX6QDL_CLK_USDHC1>, + <&clks IMX6QDL_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -863,7 +884,9 @@ compatible = "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 164>, <&clks 164>, <&clks 164>; + clocks = <&clks IMX6QDL_CLK_USDHC2>, + <&clks IMX6QDL_CLK_USDHC2>, + <&clks IMX6QDL_CLK_USDHC2>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -873,7 +896,9 @@ compatible = "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 165>, <&clks 165>, <&clks 165>; + clocks = <&clks IMX6QDL_CLK_USDHC3>, + <&clks IMX6QDL_CLK_USDHC3>, + <&clks IMX6QDL_CLK_USDHC3>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -883,7 +908,9 @@ compatible = "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 166>, <&clks 166>, <&clks 166>; + clocks = <&clks IMX6QDL_CLK_USDHC4>, + <&clks IMX6QDL_CLK_USDHC4>, + <&clks IMX6QDL_CLK_USDHC4>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -895,7 +922,7 @@ compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021a0000 0x4000>; interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 125>; + clocks = <&clks IMX6QDL_CLK_I2C1>; status = "disabled"; }; @@ -905,7 +932,7 @@ compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021a4000 0x4000>; interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 126>; + clocks = <&clks IMX6QDL_CLK_I2C2>; status = "disabled"; }; @@ -915,7 +942,7 @@ compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021a8000 0x4000>; interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 127>; + clocks = <&clks IMX6QDL_CLK_I2C3>; status = "disabled"; }; @@ -936,7 +963,7 @@ compatible = "fsl,imx6q-weim"; reg = <0x021b8000 0x4000>; interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 196>; + clocks = <&clks IMX6QDL_CLK_EIM_SLOW>; }; ocotp: ocotp@021bc000 { @@ -996,7 +1023,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021e8000 0x4000>; interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 160>, <&clks 161>; + clocks = <&clks IMX6QDL_CLK_UART_IPG>, + <&clks IMX6QDL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; dma-names = "rx", "tx"; @@ -1007,7 +1035,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021ec000 0x4000>; interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 160>, <&clks 161>; + clocks = <&clks IMX6QDL_CLK_UART_IPG>, + <&clks IMX6QDL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; dma-names = "rx", "tx"; @@ -1018,7 +1047,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f0000 0x4000>; interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 160>, <&clks 161>; + clocks = <&clks IMX6QDL_CLK_UART_IPG>, + <&clks IMX6QDL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; dma-names = "rx", "tx"; @@ -1029,7 +1059,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 160>, <&clks 161>; + clocks = <&clks IMX6QDL_CLK_UART_IPG>, + <&clks IMX6QDL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; dma-names = "rx", "tx"; @@ -1044,10 +1075,20 @@ reg = <0x02400000 0x400000>; interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>, <0 5 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 130>, <&clks 131>, <&clks 132>; + clocks = <&clks IMX6QDL_CLK_IPU1>, + <&clks IMX6QDL_CLK_IPU1_DI0>, + <&clks IMX6QDL_CLK_IPU1_DI1>; clock-names = "bus", "di0", "di1"; resets = <&src 2>; + ipu1_csi0: port@0 { + reg = <0>; + }; + + ipu1_csi1: port@1 { + reg = <1>; + }; + ipu1_di0: port@2 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/imx6sl-evk.dts b/dts/src/arm/imx6sl-evk.dts index a8d9a93fab..3f9e041c02 100644 --- a/dts/src/arm/imx6sl-evk.dts +++ b/dts/src/arm/imx6sl-evk.dts @@ -116,8 +116,9 @@ }; &fec { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_fec>; + pinctrl-1 = <&pinctrl_fec_sleep>; phy-mode = "rmii"; status = "okay"; }; @@ -300,6 +301,19 @@ >; }; + pinctrl_fec_sleep: fecgrp-sleep { + fsl,pins = < + MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x3080 + MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x3080 + MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x3080 + MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x3080 + MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x3080 + MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x3080 + MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x3080 + MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x3080 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 @@ -475,7 +489,6 @@ }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/dts/src/arm/imx6sl.dtsi b/dts/src/arm/imx6sl.dtsi index 57d4abe03a..c75800ca8b 100644 --- a/dts/src/arm/imx6sl.dtsi +++ b/dts/src/arm/imx6sl.dtsi @@ -227,8 +227,7 @@ ssi1: ssi@02028000 { compatible = "fsl,imx6sl-ssi", - "fsl,imx51-ssi", - "fsl,imx21-ssi"; + "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_SSI1>; @@ -241,8 +240,7 @@ ssi2: ssi@0202c000 { compatible = "fsl,imx6sl-ssi", - "fsl,imx51-ssi", - "fsl,imx21-ssi"; + "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_SSI2>; @@ -255,8 +253,7 @@ ssi3: ssi@02030000 { compatible = "fsl,imx6sl-ssi", - "fsl,imx51-ssi", - "fsl,imx21-ssi"; + "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_SSI3>; @@ -403,6 +400,7 @@ reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_DUMMY>; + status = "disabled"; }; wdog1: wdog@020bc000 { @@ -607,7 +605,7 @@ }; sdma: sdma@020ec000 { - compatible = "fsl,imx6sl-sdma", "fsl,imx35-sdma"; + compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_SDMA>, diff --git a/dts/src/arm/imx6sx-pinfunc.h b/dts/src/arm/imx6sx-pinfunc.h new file mode 100644 index 0000000000..3e0b816dac --- /dev/null +++ b/dts/src/arm/imx6sx-pinfunc.h @@ -0,0 +1,1544 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX6SX_PINFUNC_H +#define __DTS_IMX6SX_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x0014 0x035C 0x07A8 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO00__USDHC1_VSELECT 0x0014 0x035C 0x0000 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO00__SPDIF_LOCK 0x0014 0x035C 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO00__CCM_WAIT 0x0014 0x035C 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO00__WDOG1_WDOG_ANY 0x0014 0x035C 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO00__GPIO1_IO_0 0x0014 0x035C 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO00__SNVS_HP_WRAPPER_VIO_5 0x0014 0x035C 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO00__PHY_DTB_1 0x0014 0x035C 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x0018 0x0360 0x07AC 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO01__USDHC1_RESET_B 0x0018 0x0360 0x0000 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO01__SPDIF_SR_CLK 0x0018 0x0360 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO01__CCM_STOP 0x0018 0x0360 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO01__WDOG3_WDOG_B 0x0018 0x0360 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO01__GPIO1_IO_1 0x0018 0x0360 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO01__SNVS_HP_WRAPPER_VIO_5_CTL 0x0018 0x0360 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO01__PHY_DTB_0 0x0018 0x0360 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x001C 0x0364 0x07B0 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO02__USDHC1_CD_B 0x001C 0x0364 0x0864 0x1 0x1 +#define MX6SX_PAD_GPIO1_IO02__CSI2_MCLK 0x001C 0x0364 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO02__CCM_DI0_EXT_CLK 0x001C 0x0364 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO02__WDOG1_WDOG_B 0x001C 0x0364 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO02__GPIO1_IO_2 0x001C 0x0364 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO02__CCM_REF_EN_B 0x001C 0x0364 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO02__PHY_TDI 0x001C 0x0364 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x0020 0x0368 0x07B4 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO03__USDHC1_WP 0x0020 0x0368 0x0868 0x1 0x1 +#define MX6SX_PAD_GPIO1_IO03__ENET1_REF_CLK_25M 0x0020 0x0368 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO03__CCM_DI1_EXT_CLK 0x0020 0x0368 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO03__WDOG2_WDOG_B 0x0020 0x0368 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3 0x0020 0x0368 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO03__CCM_PLL3_BYP 0x0020 0x0368 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO03__PHY_TCK 0x0020 0x0368 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO04__UART1_RX 0x0024 0x036C 0x0830 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO04__UART1_TX 0x0024 0x036C 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO04__USDHC2_RESET_B 0x0024 0x036C 0x0000 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO04__ENET1_MDC 0x0024 0x036C 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO04__OSC32K_32K_OUT 0x0024 0x036C 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO04__ENET2_REF_CLK2 0x0024 0x036C 0x076C 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO04__GPIO1_IO_4 0x0024 0x036C 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO04__CCM_PLL2_BYP 0x0024 0x036C 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO04__PHY_TMS 0x0024 0x036C 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO05__UART1_RX 0x0028 0x0370 0x0830 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO05__UART1_TX 0x0028 0x0370 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO05__USDHC2_VSELECT 0x0028 0x0370 0x0000 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO05__ENET1_MDIO 0x0028 0x0370 0x0764 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK 0x0028 0x0370 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO05__ENET1_REF_CLK1 0x0028 0x0370 0x0760 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO05__GPIO1_IO_5 0x0028 0x0370 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO05__SRC_TESTER_ACK 0x0028 0x0370 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO05__PHY_TDO 0x0028 0x0370 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART2_RX 0x002C 0x0374 0x0838 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART2_TX 0x002C 0x0374 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO06__USDHC2_CD_B 0x002C 0x0374 0x086C 0x1 0x1 +#define MX6SX_PAD_GPIO1_IO06__ENET2_MDC 0x002C 0x0374 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO06__CSI1_MCLK 0x002C 0x0374 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B 0x002C 0x0374 0x082C 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO06__GPIO1_IO_6 0x002C 0x0374 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO06__SRC_ANY_PU_RESET 0x002C 0x0374 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED 0x002C 0x0374 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO07__UART2_RX 0x0030 0x0378 0x0838 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO07__UART2_TX 0x0030 0x0378 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO07__USDHC2_WP 0x0030 0x0378 0x0870 0x1 0x1 +#define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO 0x0030 0x0378 0x0770 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK 0x0030 0x0378 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x082C 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7 0x0030 0x0378 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET 0x0030 0x0378 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT 0x0030 0x0378 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO07__VDEC_DEBUG_44 0x0030 0x0378 0x0000 0x8 0x0 +#define MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x0034 0x037C 0x0860 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0034 0x037C 0x0000 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0 0x0034 0x037C 0x081C 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO08__CCM_PMIC_RDY 0x0034 0x037C 0x069C 0x3 0x1 +#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B 0x0034 0x037C 0x0834 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8 0x0034 0x037C 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO08__SRC_SYSTEM_RESET 0x0034 0x037C 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO08__DCIC1_OUT 0x0034 0x037C 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO08__VDEC_DEBUG_43 0x0034 0x037C 0x0000 0x8 0x0 +#define MX6SX_PAD_GPIO1_IO09__USB_OTG1_PWR 0x0038 0x0380 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B 0x0038 0x0380 0x0000 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1 0x0038 0x0380 0x0820 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO09__CCM_OUT0 0x0038 0x0380 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0834 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x0038 0x0380 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT 0x0038 0x0380 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4 0x0038 0x0380 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO09__VDEC_DEBUG_42 0x0038 0x0380 0x0000 0x8 0x0 +#define MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x003C 0x0384 0x0624 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO10__SPDIF_EXT_CLK 0x003C 0x0384 0x0828 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO10__PWM1_OUT 0x003C 0x0384 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO10__CCM_OUT1 0x003C 0x0384 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO10__CSI1_FIELD 0x003C 0x0384 0x070C 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO10__GPIO1_IO_10 0x003C 0x0384 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO10__CSU_CSU_INT_DEB 0x003C 0x0384 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO10__OBSERVE_MUX_OUT_3 0x003C 0x0384 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO10__VDEC_DEBUG_41 0x003C 0x0384 0x0000 0x8 0x0 +#define MX6SX_PAD_GPIO1_IO11__USB_OTG2_OC 0x0040 0x0388 0x085C 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO11__SPDIF_IN 0x0040 0x0388 0x0824 0x1 0x2 +#define MX6SX_PAD_GPIO1_IO11__PWM2_OUT 0x0040 0x0388 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO11__CCM_CLKO1 0x0040 0x0388 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO11__MLB_DATA 0x0040 0x0388 0x07EC 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO11__GPIO1_IO_11 0x0040 0x0388 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO11__CSU_CSU_ALARM_AUT_0 0x0040 0x0388 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO11__OBSERVE_MUX_OUT_2 0x0040 0x0388 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO11__VDEC_DEBUG_40 0x0040 0x0388 0x0000 0x8 0x0 +#define MX6SX_PAD_GPIO1_IO12__USB_OTG2_PWR 0x0044 0x038C 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO12__SPDIF_OUT 0x0044 0x038C 0x0000 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO12__PWM3_OUT 0x0044 0x038C 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO12__CCM_CLKO2 0x0044 0x038C 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO12__MLB_CLK 0x0044 0x038C 0x07E8 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x0044 0x038C 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO12__CSU_CSU_ALARM_AUT_1 0x0044 0x038C 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO12__OBSERVE_MUX_OUT_1 0x0044 0x038C 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO12__VDEC_DEBUG_39 0x0044 0x038C 0x0000 0x8 0x0 +#define MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x0048 0x0390 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO13__ANATOP_OTG2_ID 0x0048 0x0390 0x0628 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO13__PWM4_OUT 0x0048 0x0390 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO13__CCM_OUT2 0x0048 0x0390 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO13__MLB_SIG 0x0048 0x0390 0x07F0 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO13__GPIO1_IO_13 0x0048 0x0390 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO13__CSU_CSU_ALARM_AUT_2 0x0048 0x0390 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO13__OBSERVE_MUX_OUT_0 0x0048 0x0390 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO13__VDEC_DEBUG_38 0x0048 0x0390 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA00__CSI1_DATA_2 0x004C 0x0394 0x06A8 0x0 0x0 +#define MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK 0x004C 0x0394 0x078C 0x1 0x1 +#define MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x004C 0x0394 0x0684 0x2 0x1 +#define MX6SX_PAD_CSI_DATA00__I2C1_SCL 0x004C 0x0394 0x07A8 0x3 0x0 +#define MX6SX_PAD_CSI_DATA00__UART6_RI_B 0x004C 0x0394 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA00__GPIO1_IO_14 0x004C 0x0394 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_DATA00__WEIM_DATA_23 0x004C 0x0394 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK 0x004C 0x0394 0x0800 0x7 0x0 +#define MX6SX_PAD_CSI_DATA00__VADC_DATA_4 0x004C 0x0394 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA00__MMDC_DEBUG_37 0x004C 0x0394 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_DATA01__CSI1_DATA_3 0x0050 0x0398 0x06AC 0x0 0x0 +#define MX6SX_PAD_CSI_DATA01__ESAI_TX_FS 0x0050 0x0398 0x077C 0x1 0x1 +#define MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x0050 0x0398 0x0688 0x2 0x1 +#define MX6SX_PAD_CSI_DATA01__I2C1_SDA 0x0050 0x0398 0x07AC 0x3 0x0 +#define MX6SX_PAD_CSI_DATA01__UART6_DSR_B 0x0050 0x0398 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA01__GPIO1_IO_15 0x0050 0x0398 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_DATA01__WEIM_DATA_22 0x0050 0x0398 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC 0x0050 0x0398 0x0804 0x7 0x0 +#define MX6SX_PAD_CSI_DATA01__VADC_DATA_5 0x0050 0x0398 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA01__MMDC_DEBUG_38 0x0050 0x0398 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_DATA02__CSI1_DATA_4 0x0054 0x039C 0x06B0 0x0 0x0 +#define MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK 0x0054 0x039C 0x0788 0x1 0x1 +#define MX6SX_PAD_CSI_DATA02__AUDMUX_AUD6_RXC 0x0054 0x039C 0x067C 0x2 0x1 +#define MX6SX_PAD_CSI_DATA02__KPP_COL_5 0x0054 0x039C 0x07C8 0x3 0x0 +#define MX6SX_PAD_CSI_DATA02__UART6_DTR_B 0x0054 0x039C 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA02__GPIO1_IO_16 0x0054 0x039C 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_DATA02__WEIM_DATA_21 0x0054 0x039C 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_DATA02__SAI1_RX_BCLK 0x0054 0x039C 0x07F4 0x7 0x0 +#define MX6SX_PAD_CSI_DATA02__VADC_DATA_6 0x0054 0x039C 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA02__MMDC_DEBUG_39 0x0054 0x039C 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_DATA03__CSI1_DATA_5 0x0058 0x03A0 0x06B4 0x0 0x0 +#define MX6SX_PAD_CSI_DATA03__ESAI_RX_FS 0x0058 0x03A0 0x0778 0x1 0x1 +#define MX6SX_PAD_CSI_DATA03__AUDMUX_AUD6_RXFS 0x0058 0x03A0 0x0680 0x2 0x1 +#define MX6SX_PAD_CSI_DATA03__KPP_ROW_5 0x0058 0x03A0 0x07D4 0x3 0x0 +#define MX6SX_PAD_CSI_DATA03__UART6_DCD_B 0x0058 0x03A0 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x0058 0x03A0 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_DATA03__WEIM_DATA_20 0x0058 0x03A0 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_DATA03__SAI1_RX_SYNC 0x0058 0x03A0 0x07FC 0x7 0x0 +#define MX6SX_PAD_CSI_DATA03__VADC_DATA_7 0x0058 0x03A0 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA03__MMDC_DEBUG_40 0x0058 0x03A0 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_DATA04__CSI1_DATA_6 0x005C 0x03A4 0x06B8 0x0 0x0 +#define MX6SX_PAD_CSI_DATA04__ESAI_TX1 0x005C 0x03A4 0x0794 0x1 0x1 +#define MX6SX_PAD_CSI_DATA04__SPDIF_OUT 0x005C 0x03A4 0x0000 0x2 0x0 +#define MX6SX_PAD_CSI_DATA04__KPP_COL_6 0x005C 0x03A4 0x07CC 0x3 0x0 +#define MX6SX_PAD_CSI_DATA04__UART6_RX 0x005C 0x03A4 0x0858 0x4 0x0 +#define MX6SX_PAD_CSI_DATA04__UART6_TX 0x005C 0x03A4 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x005C 0x03A4 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_DATA04__WEIM_DATA_19 0x005C 0x03A4 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_DATA04__PWM5_OUT 0x005C 0x03A4 0x0000 0x7 0x0 +#define MX6SX_PAD_CSI_DATA04__VADC_DATA_8 0x005C 0x03A4 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA04__MMDC_DEBUG_41 0x005C 0x03A4 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_DATA05__CSI1_DATA_7 0x0060 0x03A8 0x06BC 0x0 0x0 +#define MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1 0x0060 0x03A8 0x07A0 0x1 0x1 +#define MX6SX_PAD_CSI_DATA05__SPDIF_IN 0x0060 0x03A8 0x0824 0x2 0x1 +#define MX6SX_PAD_CSI_DATA05__KPP_ROW_6 0x0060 0x03A8 0x07D8 0x3 0x0 +#define MX6SX_PAD_CSI_DATA05__UART6_RX 0x0060 0x03A8 0x0858 0x4 0x1 +#define MX6SX_PAD_CSI_DATA05__UART6_TX 0x0060 0x03A8 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x0060 0x03A8 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_DATA05__WEIM_DATA_18 0x0060 0x03A8 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_DATA05__PWM6_OUT 0x0060 0x03A8 0x0000 0x7 0x0 +#define MX6SX_PAD_CSI_DATA05__VADC_DATA_9 0x0060 0x03A8 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA05__MMDC_DEBUG_42 0x0060 0x03A8 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_DATA06__CSI1_DATA_8 0x0064 0x03AC 0x06C0 0x0 0x0 +#define MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3 0x0064 0x03AC 0x0798 0x1 0x1 +#define MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x0064 0x03AC 0x07C0 0x2 0x2 +#define MX6SX_PAD_CSI_DATA06__KPP_COL_7 0x0064 0x03AC 0x07D0 0x3 0x0 +#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x0064 0x03AC 0x0854 0x4 0x0 +#define MX6SX_PAD_CSI_DATA06__GPIO1_IO_20 0x0064 0x03AC 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_DATA06__WEIM_DATA_17 0x0064 0x03AC 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_DATA06__DCIC2_OUT 0x0064 0x03AC 0x0000 0x7 0x0 +#define MX6SX_PAD_CSI_DATA06__VADC_DATA_10 0x0064 0x03AC 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA06__MMDC_DEBUG_43 0x0064 0x03AC 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_DATA07__CSI1_DATA_9 0x0068 0x03B0 0x06C4 0x0 0x0 +#define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x0068 0x03B0 0x079C 0x1 0x1 +#define MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x0068 0x03B0 0x07C4 0x2 0x2 +#define MX6SX_PAD_CSI_DATA07__KPP_ROW_7 0x0068 0x03B0 0x07DC 0x3 0x0 +#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0854 0x4 0x1 +#define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21 0x0068 0x03B0 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16 0x0068 0x03B0 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_DATA07__DCIC1_OUT 0x0068 0x03B0 0x0000 0x7 0x0 +#define MX6SX_PAD_CSI_DATA07__VADC_DATA_11 0x0068 0x03B0 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA07__MMDC_DEBUG_44 0x0068 0x03B0 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_HSYNC__CSI1_HSYNC 0x006C 0x03B4 0x0700 0x0 0x0 +#define MX6SX_PAD_CSI_HSYNC__ESAI_TX0 0x006C 0x03B4 0x0790 0x1 0x1 +#define MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x006C 0x03B4 0x0678 0x2 0x1 +#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B 0x006C 0x03B4 0x0844 0x3 0x2 +#define MX6SX_PAD_CSI_HSYNC__MQS_LEFT 0x006C 0x03B4 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_HSYNC__GPIO1_IO_22 0x006C 0x03B4 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_HSYNC__WEIM_DATA_25 0x006C 0x03B4 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0 0x006C 0x03B4 0x0000 0x7 0x0 +#define MX6SX_PAD_CSI_HSYNC__VADC_DATA_2 0x006C 0x03B4 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_HSYNC__MMDC_DEBUG_35 0x006C 0x03B4 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_MCLK__CSI1_MCLK 0x0070 0x03B8 0x0000 0x0 0x0 +#define MX6SX_PAD_CSI_MCLK__ESAI_TX_HF_CLK 0x0070 0x03B8 0x0784 0x1 0x1 +#define MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT 0x0070 0x03B8 0x0000 0x2 0x0 +#define MX6SX_PAD_CSI_MCLK__UART4_RX 0x0070 0x03B8 0x0848 0x3 0x2 +#define MX6SX_PAD_CSI_MCLK__UART4_TX 0x0070 0x03B8 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_MCLK__ANATOP_32K_OUT 0x0070 0x03B8 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_MCLK__GPIO1_IO_23 0x0070 0x03B8 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_MCLK__WEIM_DATA_26 0x0070 0x03B8 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_MCLK__CSI1_FIELD 0x0070 0x03B8 0x070C 0x7 0x0 +#define MX6SX_PAD_CSI_MCLK__VADC_DATA_1 0x0070 0x03B8 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_MCLK__MMDC_DEBUG_34 0x0070 0x03B8 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_PIXCLK__CSI1_PIXCLK 0x0074 0x03BC 0x0704 0x0 0x0 +#define MX6SX_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK 0x0074 0x03BC 0x0780 0x1 0x1 +#define MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x0074 0x03BC 0x0000 0x2 0x0 +#define MX6SX_PAD_CSI_PIXCLK__UART4_RX 0x0074 0x03BC 0x0848 0x3 0x3 +#define MX6SX_PAD_CSI_PIXCLK__UART4_TX 0x0074 0x03BC 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_PIXCLK__ANATOP_24M_OUT 0x0074 0x03BC 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x0074 0x03BC 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_PIXCLK__WEIM_DATA_27 0x0074 0x03BC 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_PIXCLK__ESAI_TX_HF_CLK 0x0074 0x03BC 0x0784 0x7 0x2 +#define MX6SX_PAD_CSI_PIXCLK__VADC_CLK 0x0074 0x03BC 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_PIXCLK__MMDC_DEBUG_33 0x0074 0x03BC 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC 0x0078 0x03C0 0x0708 0x0 0x0 +#define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x0078 0x03C0 0x07A4 0x1 0x1 +#define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x0078 0x03C0 0x0674 0x2 0x1 +#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0844 0x3 0x3 +#define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT 0x0078 0x03C0 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25 0x0078 0x03C0 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24 0x0078 0x03C0 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0 0x0078 0x03C0 0x07F8 0x7 0x0 +#define MX6SX_PAD_CSI_VSYNC__VADC_DATA_3 0x0078 0x03C0 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_VSYNC__MMDC_DEBUG_36 0x0078 0x03C0 0x0000 0x9 0x0 +#define MX6SX_PAD_ENET1_COL__ENET1_COL 0x007C 0x03C4 0x0000 0x0 0x0 +#define MX6SX_PAD_ENET1_COL__ENET2_MDC 0x007C 0x03C4 0x0000 0x1 0x0 +#define MX6SX_PAD_ENET1_COL__AUDMUX_AUD4_TXC 0x007C 0x03C4 0x0654 0x2 0x1 +#define MX6SX_PAD_ENET1_COL__UART1_RI_B 0x007C 0x03C4 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET1_COL__SPDIF_EXT_CLK 0x007C 0x03C4 0x0828 0x4 0x1 +#define MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x007C 0x03C4 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET1_COL__CSI2_DATA_23 0x007C 0x03C4 0x0000 0x6 0x0 +#define MX6SX_PAD_ENET1_COL__LCDIF2_DATA_16 0x007C 0x03C4 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET1_COL__VDEC_DEBUG_37 0x007C 0x03C4 0x0000 0x8 0x0 +#define MX6SX_PAD_ENET1_COL__PCIE_CTRL_DEBUG_31 0x007C 0x03C4 0x0000 0x9 0x0 +#define MX6SX_PAD_ENET1_CRS__ENET1_CRS 0x0080 0x03C8 0x0000 0x0 0x0 +#define MX6SX_PAD_ENET1_CRS__ENET2_MDIO 0x0080 0x03C8 0x0770 0x1 0x1 +#define MX6SX_PAD_ENET1_CRS__AUDMUX_AUD4_TXD 0x0080 0x03C8 0x0648 0x2 0x1 +#define MX6SX_PAD_ENET1_CRS__UART1_DCD_B 0x0080 0x03C8 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET1_CRS__SPDIF_LOCK 0x0080 0x03C8 0x0000 0x4 0x0 +#define MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x0080 0x03C8 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET1_CRS__CSI2_DATA_22 0x0080 0x03C8 0x0000 0x6 0x0 +#define MX6SX_PAD_ENET1_CRS__LCDIF2_DATA_17 0x0080 0x03C8 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET1_CRS__VDEC_DEBUG_36 0x0080 0x03C8 0x0000 0x8 0x0 +#define MX6SX_PAD_ENET1_CRS__PCIE_CTRL_DEBUG_30 0x0080 0x03C8 0x0000 0x9 0x0 +#define MX6SX_PAD_ENET1_MDC__ENET1_MDC 0x0084 0x03CC 0x0000 0x0 0x0 +#define MX6SX_PAD_ENET1_MDC__ENET2_MDC 0x0084 0x03CC 0x0000 0x1 0x0 +#define MX6SX_PAD_ENET1_MDC__AUDMUX_AUD3_RXFS 0x0084 0x03CC 0x0638 0x2 0x1 +#define MX6SX_PAD_ENET1_MDC__ANATOP_24M_OUT 0x0084 0x03CC 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET1_MDC__EPIT2_OUT 0x0084 0x03CC 0x0000 0x4 0x0 +#define MX6SX_PAD_ENET1_MDC__GPIO2_IO_2 0x0084 0x03CC 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET1_MDC__USB_OTG1_PWR 0x0084 0x03CC 0x0000 0x6 0x0 +#define MX6SX_PAD_ENET1_MDC__PWM7_OUT 0x0084 0x03CC 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0x0088 0x03D0 0x0764 0x0 0x1 +#define MX6SX_PAD_ENET1_MDIO__ENET2_MDIO 0x0088 0x03D0 0x0770 0x1 0x2 +#define MX6SX_PAD_ENET1_MDIO__AUDMUX_MCLK 0x0088 0x03D0 0x0000 0x2 0x0 +#define MX6SX_PAD_ENET1_MDIO__OSC32K_32K_OUT 0x0088 0x03D0 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET1_MDIO__EPIT1_OUT 0x0088 0x03D0 0x0000 0x4 0x0 +#define MX6SX_PAD_ENET1_MDIO__GPIO2_IO_3 0x0088 0x03D0 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET1_MDIO__USB_OTG1_OC 0x0088 0x03D0 0x0860 0x6 0x1 +#define MX6SX_PAD_ENET1_MDIO__PWM8_OUT 0x0088 0x03D0 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__ENET1_RX_CLK 0x008C 0x03D4 0x0768 0x0 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__ENET1_REF_CLK_25M 0x008C 0x03D4 0x0000 0x1 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__AUDMUX_AUD4_TXFS 0x008C 0x03D4 0x0658 0x2 0x1 +#define MX6SX_PAD_ENET1_RX_CLK__UART1_DSR_B 0x008C 0x03D4 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__SPDIF_OUT 0x008C 0x03D4 0x0000 0x4 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4 0x008C 0x03D4 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__CSI2_DATA_21 0x008C 0x03D4 0x0000 0x6 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__LCDIF2_DATA_18 0x008C 0x03D4 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__VDEC_DEBUG_35 0x008C 0x03D4 0x0000 0x8 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__PCIE_CTRL_DEBUG_29 0x008C 0x03D4 0x0000 0x9 0x0 +#define MX6SX_PAD_ENET1_TX_CLK__ENET1_TX_CLK 0x0090 0x03D8 0x0000 0x0 0x0 +#define MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x0090 0x03D8 0x0760 0x1 0x1 +#define MX6SX_PAD_ENET1_TX_CLK__AUDMUX_AUD4_RXD 0x0090 0x03D8 0x0644 0x2 0x1 +#define MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B 0x0090 0x03D8 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET1_TX_CLK__SPDIF_SR_CLK 0x0090 0x03D8 0x0000 0x4 0x0 +#define MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5 0x0090 0x03D8 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET1_TX_CLK__CSI2_DATA_20 0x0090 0x03D8 0x0000 0x6 0x0 +#define MX6SX_PAD_ENET1_TX_CLK__LCDIF2_DATA_19 0x0090 0x03D8 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET1_TX_CLK__VDEC_DEBUG_34 0x0090 0x03D8 0x0000 0x8 0x0 +#define MX6SX_PAD_ENET1_TX_CLK__PCIE_CTRL_DEBUG_28 0x0090 0x03D8 0x0000 0x9 0x0 +#define MX6SX_PAD_ENET2_COL__ENET2_COL 0x0094 0x03DC 0x0000 0x0 0x0 +#define MX6SX_PAD_ENET2_COL__ENET1_MDC 0x0094 0x03DC 0x0000 0x1 0x0 +#define MX6SX_PAD_ENET2_COL__AUDMUX_AUD4_RXC 0x0094 0x03DC 0x064C 0x2 0x1 +#define MX6SX_PAD_ENET2_COL__UART1_RX 0x0094 0x03DC 0x0830 0x3 0x2 +#define MX6SX_PAD_ENET2_COL__UART1_TX 0x0094 0x03DC 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_COL__SPDIF_IN 0x0094 0x03DC 0x0824 0x4 0x3 +#define MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x0094 0x03DC 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET2_COL__ANATOP_OTG1_ID 0x0094 0x03DC 0x0624 0x6 0x1 +#define MX6SX_PAD_ENET2_COL__LCDIF2_DATA_20 0x0094 0x03DC 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET2_COL__VDEC_DEBUG_33 0x0094 0x03DC 0x0000 0x8 0x0 +#define MX6SX_PAD_ENET2_COL__PCIE_CTRL_DEBUG_27 0x0094 0x03DC 0x0000 0x9 0x0 +#define MX6SX_PAD_ENET2_CRS__ENET2_CRS 0x0098 0x03E0 0x0000 0x0 0x0 +#define MX6SX_PAD_ENET2_CRS__ENET1_MDIO 0x0098 0x03E0 0x0764 0x1 0x2 +#define MX6SX_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS 0x0098 0x03E0 0x0650 0x2 0x1 +#define MX6SX_PAD_ENET2_CRS__UART1_RX 0x0098 0x03E0 0x0830 0x3 0x3 +#define MX6SX_PAD_ENET2_CRS__UART1_TX 0x0098 0x03E0 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_CRS__MLB_SIG 0x0098 0x03E0 0x07F0 0x4 0x1 +#define MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0x0098 0x03E0 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET2_CRS__ANATOP_OTG2_ID 0x0098 0x03E0 0x0628 0x6 0x1 +#define MX6SX_PAD_ENET2_CRS__LCDIF2_DATA_21 0x0098 0x03E0 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET2_CRS__VDEC_DEBUG_32 0x0098 0x03E0 0x0000 0x8 0x0 +#define MX6SX_PAD_ENET2_CRS__PCIE_CTRL_DEBUG_26 0x0098 0x03E0 0x0000 0x9 0x0 +#define MX6SX_PAD_ENET2_RX_CLK__ENET2_RX_CLK 0x009C 0x03E4 0x0774 0x0 0x0 +#define MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x009C 0x03E4 0x0000 0x1 0x0 +#define MX6SX_PAD_ENET2_RX_CLK__I2C3_SCL 0x009C 0x03E4 0x07B8 0x2 0x1 +#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B 0x009C 0x03E4 0x082C 0x3 0x2 +#define MX6SX_PAD_ENET2_RX_CLK__MLB_DATA 0x009C 0x03E4 0x07EC 0x4 0x1 +#define MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8 0x009C 0x03E4 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET2_RX_CLK__USB_OTG2_OC 0x009C 0x03E4 0x085C 0x6 0x1 +#define MX6SX_PAD_ENET2_RX_CLK__LCDIF2_DATA_22 0x009C 0x03E4 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET2_RX_CLK__VDEC_DEBUG_31 0x009C 0x03E4 0x0000 0x8 0x0 +#define MX6SX_PAD_ENET2_RX_CLK__PCIE_CTRL_DEBUG_25 0x009C 0x03E4 0x0000 0x9 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00A0 0x03E8 0x0000 0x0 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00A0 0x03E8 0x076C 0x1 0x1 +#define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA 0x00A0 0x03E8 0x07BC 0x2 0x1 +#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x082C 0x3 0x3 +#define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK 0x00A0 0x03E8 0x07E8 0x4 0x1 +#define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x00A0 0x03E8 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR 0x00A0 0x03E8 0x0000 0x6 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__LCDIF2_DATA_23 0x00A0 0x03E8 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__VDEC_DEBUG_30 0x00A0 0x03E8 0x0000 0x8 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24 0x00A0 0x03E8 0x0000 0x9 0x0 +#define MX6SX_PAD_KEY_COL0__KPP_COL_0 0x00A4 0x03EC 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_COL0__USDHC3_CD_B 0x00A4 0x03EC 0x0000 0x1 0x0 +#define MX6SX_PAD_KEY_COL0__UART6_RTS_B 0x00A4 0x03EC 0x0854 0x2 0x2 +#define MX6SX_PAD_KEY_COL0__ECSPI1_SCLK 0x00A4 0x03EC 0x0710 0x3 0x0 +#define MX6SX_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x00A4 0x03EC 0x066C 0x4 0x0 +#define MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x00A4 0x03EC 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_COL0__SDMA_EXT_EVENT_1 0x00A4 0x03EC 0x0820 0x6 0x1 +#define MX6SX_PAD_KEY_COL0__SAI2_TX_BCLK 0x00A4 0x03EC 0x0814 0x7 0x0 +#define MX6SX_PAD_KEY_COL0__VADC_DATA_0 0x00A4 0x03EC 0x0000 0x8 0x0 +#define MX6SX_PAD_KEY_COL1__KPP_COL_1 0x00A8 0x03F0 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_COL1__USDHC3_RESET_B 0x00A8 0x03F0 0x0000 0x1 0x0 +#define MX6SX_PAD_KEY_COL1__UART6_RX 0x00A8 0x03F0 0x0858 0x2 0x2 +#define MX6SX_PAD_KEY_COL1__UART6_TX 0x00A8 0x03F0 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_COL1__ECSPI1_MISO 0x00A8 0x03F0 0x0714 0x3 0x0 +#define MX6SX_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x00A8 0x03F0 0x0670 0x4 0x0 +#define MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x00A8 0x03F0 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_COL1__USDHC3_RESET 0x00A8 0x03F0 0x0000 0x6 0x0 +#define MX6SX_PAD_KEY_COL1__SAI2_TX_SYNC 0x00A8 0x03F0 0x0818 0x7 0x0 +#define MX6SX_PAD_KEY_COL2__KPP_COL_2 0x00AC 0x03F4 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_COL2__USDHC4_CD_B 0x00AC 0x03F4 0x0874 0x1 0x1 +#define MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x00AC 0x03F4 0x084C 0x2 0x2 +#define MX6SX_PAD_KEY_COL2__CAN1_TX 0x00AC 0x03F4 0x0000 0x3 0x0 +#define MX6SX_PAD_KEY_COL2__CANFD_TX1 0x00AC 0x03F4 0x0000 0x4 0x0 +#define MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x00AC 0x03F4 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_COL2__WEIM_DATA_30 0x00AC 0x03F4 0x0000 0x6 0x0 +#define MX6SX_PAD_KEY_COL2__ECSPI1_RDY 0x00AC 0x03F4 0x0000 0x7 0x0 +#define MX6SX_PAD_KEY_COL3__KPP_COL_3 0x00B0 0x03F8 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_COL3__USDHC4_LCTL 0x00B0 0x03F8 0x0000 0x1 0x0 +#define MX6SX_PAD_KEY_COL3__UART5_RX 0x00B0 0x03F8 0x0850 0x2 0x2 +#define MX6SX_PAD_KEY_COL3__UART5_TX 0x00B0 0x03F8 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_COL3__CAN2_TX 0x00B0 0x03F8 0x0000 0x3 0x0 +#define MX6SX_PAD_KEY_COL3__CANFD_TX2 0x00B0 0x03F8 0x0000 0x4 0x0 +#define MX6SX_PAD_KEY_COL3__GPIO2_IO_13 0x00B0 0x03F8 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_COL3__WEIM_DATA_28 0x00B0 0x03F8 0x0000 0x6 0x0 +#define MX6SX_PAD_KEY_COL3__ECSPI1_SS2 0x00B0 0x03F8 0x0000 0x7 0x0 +#define MX6SX_PAD_KEY_COL4__KPP_COL_4 0x00B4 0x03FC 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_COL4__ENET2_MDC 0x00B4 0x03FC 0x0000 0x1 0x0 +#define MX6SX_PAD_KEY_COL4__I2C3_SCL 0x00B4 0x03FC 0x07B8 0x2 0x2 +#define MX6SX_PAD_KEY_COL4__USDHC2_LCTL 0x00B4 0x03FC 0x0000 0x3 0x0 +#define MX6SX_PAD_KEY_COL4__AUDMUX_AUD5_RXC 0x00B4 0x03FC 0x0664 0x4 0x0 +#define MX6SX_PAD_KEY_COL4__GPIO2_IO_14 0x00B4 0x03FC 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_COL4__WEIM_CRE 0x00B4 0x03FC 0x0000 0x6 0x0 +#define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK 0x00B4 0x03FC 0x0808 0x7 0x0 +#define MX6SX_PAD_KEY_ROW0__KPP_ROW_0 0x00B8 0x0400 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_ROW0__USDHC3_WP 0x00B8 0x0400 0x0000 0x1 0x0 +#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0854 0x2 0x3 +#define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x00B8 0x0400 0x0718 0x3 0x0 +#define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x00B8 0x0400 0x0660 0x4 0x0 +#define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x00B8 0x0400 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_ROW0__SDMA_EXT_EVENT_0 0x00B8 0x0400 0x081C 0x6 0x1 +#define MX6SX_PAD_KEY_ROW0__SAI2_TX_DATA_0 0x00B8 0x0400 0x0000 0x7 0x0 +#define MX6SX_PAD_KEY_ROW0__GPU_IDLE 0x00B8 0x0400 0x0000 0x8 0x0 +#define MX6SX_PAD_KEY_ROW1__KPP_ROW_1 0x00BC 0x0404 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_ROW1__USDHC4_VSELECT 0x00BC 0x0404 0x0000 0x1 0x0 +#define MX6SX_PAD_KEY_ROW1__UART6_RX 0x00BC 0x0404 0x0858 0x2 0x3 +#define MX6SX_PAD_KEY_ROW1__UART6_TX 0x00BC 0x0404 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW1__ECSPI1_SS0 0x00BC 0x0404 0x071C 0x3 0x0 +#define MX6SX_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x00BC 0x0404 0x065C 0x4 0x0 +#define MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x00BC 0x0404 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_ROW1__WEIM_DATA_31 0x00BC 0x0404 0x0000 0x6 0x0 +#define MX6SX_PAD_KEY_ROW1__SAI2_RX_DATA_0 0x00BC 0x0404 0x080C 0x7 0x0 +#define MX6SX_PAD_KEY_ROW1__M4_NMI 0x00BC 0x0404 0x0000 0x8 0x0 +#define MX6SX_PAD_KEY_ROW2__KPP_ROW_2 0x00C0 0x0408 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_ROW2__USDHC4_WP 0x00C0 0x0408 0x0878 0x1 0x1 +#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x084C 0x2 0x3 +#define MX6SX_PAD_KEY_ROW2__CAN1_RX 0x00C0 0x0408 0x068C 0x3 0x1 +#define MX6SX_PAD_KEY_ROW2__CANFD_RX1 0x00C0 0x0408 0x0694 0x4 0x1 +#define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x00C0 0x0408 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_ROW2__WEIM_DATA_29 0x00C0 0x0408 0x0000 0x6 0x0 +#define MX6SX_PAD_KEY_ROW2__ECSPI1_SS3 0x00C0 0x0408 0x0000 0x7 0x0 +#define MX6SX_PAD_KEY_ROW3__KPP_ROW_3 0x00C4 0x040C 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_ROW3__USDHC3_LCTL 0x00C4 0x040C 0x0000 0x1 0x0 +#define MX6SX_PAD_KEY_ROW3__UART5_RX 0x00C4 0x040C 0x0850 0x2 0x3 +#define MX6SX_PAD_KEY_ROW3__UART5_TX 0x00C4 0x040C 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW3__CAN2_RX 0x00C4 0x040C 0x0690 0x3 0x1 +#define MX6SX_PAD_KEY_ROW3__CANFD_RX2 0x00C4 0x040C 0x0698 0x4 0x1 +#define MX6SX_PAD_KEY_ROW3__GPIO2_IO_18 0x00C4 0x040C 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_ROW3__WEIM_DTACK_B 0x00C4 0x040C 0x0000 0x6 0x0 +#define MX6SX_PAD_KEY_ROW3__ECSPI1_SS1 0x00C4 0x040C 0x0000 0x7 0x0 +#define MX6SX_PAD_KEY_ROW4__KPP_ROW_4 0x00C8 0x0410 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_ROW4__ENET2_MDIO 0x00C8 0x0410 0x0770 0x1 0x3 +#define MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x00C8 0x0410 0x07BC 0x2 0x2 +#define MX6SX_PAD_KEY_ROW4__USDHC1_LCTL 0x00C8 0x0410 0x0000 0x3 0x0 +#define MX6SX_PAD_KEY_ROW4__AUDMUX_AUD5_RXFS 0x00C8 0x0410 0x0668 0x4 0x0 +#define MX6SX_PAD_KEY_ROW4__GPIO2_IO_19 0x00C8 0x0410 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_ROW4__WEIM_ACLK_FREERUN 0x00C8 0x0410 0x0000 0x6 0x0 +#define MX6SX_PAD_KEY_ROW4__SAI2_RX_SYNC 0x00C8 0x0410 0x0810 0x7 0x0 +#define MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x00CC 0x0414 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_CLK__LCDIF1_WR_RWN 0x00CC 0x0414 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_CLK__AUDMUX_AUD3_RXC 0x00CC 0x0414 0x0634 0x2 0x1 +#define MX6SX_PAD_LCD1_CLK__ENET1_1588_EVENT2_IN 0x00CC 0x0414 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_CLK__CSI1_DATA_16 0x00CC 0x0414 0x06DC 0x4 0x0 +#define MX6SX_PAD_LCD1_CLK__GPIO3_IO_0 0x00CC 0x0414 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_CLK__USDHC1_WP 0x00CC 0x0414 0x0868 0x6 0x0 +#define MX6SX_PAD_LCD1_CLK__SIM_M_HADDR_16 0x00CC 0x0414 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_CLK__VADC_TEST_0 0x00CC 0x0414 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_CLK__MMDC_DEBUG_0 0x00CC 0x0414 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x00D0 0x0418 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA00__WEIM_CS1_B 0x00D0 0x0418 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA00__M4_TRACE_0 0x00D0 0x0418 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA00__KITTEN_TRACE_0 0x00D0 0x0418 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA00__CSI1_DATA_20 0x00D0 0x0418 0x06EC 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA00__GPIO3_IO_1 0x00D0 0x0418 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA00__SRC_BT_CFG_0 0x00D0 0x0418 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA00__SIM_M_HADDR_21 0x00D0 0x0418 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA00__VADC_TEST_5 0x00D0 0x0418 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA00__MMDC_DEBUG_5 0x00D0 0x0418 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x00D4 0x041C 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA01__WEIM_CS2_B 0x00D4 0x041C 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA01__M4_TRACE_1 0x00D4 0x041C 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA01__KITTEN_TRACE_1 0x00D4 0x041C 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA01__CSI1_DATA_21 0x00D4 0x041C 0x06F0 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA01__GPIO3_IO_2 0x00D4 0x041C 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA01__SRC_BT_CFG_1 0x00D4 0x041C 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA01__SIM_M_HADDR_22 0x00D4 0x041C 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA01__VADC_TEST_6 0x00D4 0x041C 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA01__MMDC_DEBUG_6 0x00D4 0x041C 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x00D8 0x0420 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA02__WEIM_CS3_B 0x00D8 0x0420 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA02__M4_TRACE_2 0x00D8 0x0420 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA02__KITTEN_TRACE_2 0x00D8 0x0420 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA02__CSI1_DATA_22 0x00D8 0x0420 0x06F4 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA02__GPIO3_IO_3 0x00D8 0x0420 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA02__SRC_BT_CFG_2 0x00D8 0x0420 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA02__SIM_M_HADDR_23 0x00D8 0x0420 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA02__VADC_TEST_7 0x00D8 0x0420 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA02__MMDC_DEBUG_7 0x00D8 0x0420 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x00DC 0x0424 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA03__WEIM_ADDR_24 0x00DC 0x0424 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA03__M4_TRACE_3 0x00DC 0x0424 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA03__KITTEN_TRACE_3 0x00DC 0x0424 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA03__CSI1_DATA_23 0x00DC 0x0424 0x06F8 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA03__GPIO3_IO_4 0x00DC 0x0424 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA03__SRC_BT_CFG_3 0x00DC 0x0424 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA03__SIM_M_HADDR_24 0x00DC 0x0424 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA03__VADC_TEST_8 0x00DC 0x0424 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA03__MMDC_DEBUG_8 0x00DC 0x0424 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x00E0 0x0428 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA04__WEIM_ADDR_25 0x00E0 0x0428 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA04__KITTEN_TRACE_4 0x00E0 0x0428 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA04__CSI1_VSYNC 0x00E0 0x0428 0x0708 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA04__GPIO3_IO_5 0x00E0 0x0428 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA04__SRC_BT_CFG_4 0x00E0 0x0428 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA04__SIM_M_HADDR_25 0x00E0 0x0428 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA04__VADC_TEST_9 0x00E0 0x0428 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA04__MMDC_DEBUG_9 0x00E0 0x0428 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x00E4 0x042C 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA05__WEIM_ADDR_26 0x00E4 0x042C 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA05__KITTEN_TRACE_5 0x00E4 0x042C 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA05__CSI1_HSYNC 0x00E4 0x042C 0x0700 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA05__GPIO3_IO_6 0x00E4 0x042C 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA05__SRC_BT_CFG_5 0x00E4 0x042C 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA05__SIM_M_HADDR_26 0x00E4 0x042C 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA05__VADC_TEST_10 0x00E4 0x042C 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA05__MMDC_DEBUG_10 0x00E4 0x042C 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x00E8 0x0430 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA06__WEIM_EB_B_2 0x00E8 0x0430 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA06__KITTEN_TRACE_6 0x00E8 0x0430 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA06__CSI1_PIXCLK 0x00E8 0x0430 0x0704 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA06__GPIO3_IO_7 0x00E8 0x0430 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA06__SRC_BT_CFG_6 0x00E8 0x0430 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA06__SIM_M_HADDR_27 0x00E8 0x0430 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA06__VADC_TEST_11 0x00E8 0x0430 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA06__MMDC_DEBUG_11 0x00E8 0x0430 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x00EC 0x0434 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA07__WEIM_EB_B_3 0x00EC 0x0434 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA07__KITTEN_TRACE_7 0x00EC 0x0434 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA07__CSI1_MCLK 0x00EC 0x0434 0x0000 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA07__GPIO3_IO_8 0x00EC 0x0434 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA07__SRC_BT_CFG_7 0x00EC 0x0434 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA07__SIM_M_HADDR_28 0x00EC 0x0434 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA07__VADC_TEST_12 0x00EC 0x0434 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA07__MMDC_DEBUG_12 0x00EC 0x0434 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x00F0 0x0438 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA08__WEIM_AD_8 0x00F0 0x0438 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA08__KITTEN_TRACE_8 0x00F0 0x0438 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA08__CSI1_DATA_9 0x00F0 0x0438 0x06C4 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA08__GPIO3_IO_9 0x00F0 0x0438 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA08__SRC_BT_CFG_8 0x00F0 0x0438 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA08__SIM_M_HADDR_29 0x00F0 0x0438 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA08__VADC_TEST_13 0x00F0 0x0438 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA08__MMDC_DEBUG_13 0x00F0 0x0438 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x00F4 0x043C 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA09__WEIM_AD_9 0x00F4 0x043C 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA09__KITTEN_TRACE_9 0x00F4 0x043C 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA09__CSI1_DATA_8 0x00F4 0x043C 0x06C0 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA09__GPIO3_IO_10 0x00F4 0x043C 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA09__SRC_BT_CFG_9 0x00F4 0x043C 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA09__SIM_M_HADDR_30 0x00F4 0x043C 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA09__VADC_TEST_14 0x00F4 0x043C 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA09__MMDC_DEBUG_14 0x00F4 0x043C 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x00F8 0x0440 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA10__WEIM_AD_10 0x00F8 0x0440 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA10__KITTEN_TRACE_10 0x00F8 0x0440 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA10__CSI1_DATA_7 0x00F8 0x0440 0x06BC 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA10__GPIO3_IO_11 0x00F8 0x0440 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA10__SRC_BT_CFG_10 0x00F8 0x0440 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA10__SIM_M_HADDR_31 0x00F8 0x0440 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA10__VADC_TEST_15 0x00F8 0x0440 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA10__MMDC_DEBUG_15 0x00F8 0x0440 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x00FC 0x0444 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA11__WEIM_AD_11 0x00FC 0x0444 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA11__KITTEN_TRACE_11 0x00FC 0x0444 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA11__CSI1_DATA_6 0x00FC 0x0444 0x06B8 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA11__GPIO3_IO_12 0x00FC 0x0444 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA11__SRC_BT_CFG_11 0x00FC 0x0444 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA11__SIM_M_HBURST_0 0x00FC 0x0444 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA11__VADC_TEST_16 0x00FC 0x0444 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA11__MMDC_DEBUG_16 0x00FC 0x0444 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x0100 0x0448 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA12__WEIM_AD_12 0x0100 0x0448 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA12__KITTEN_TRACE_12 0x0100 0x0448 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA12__CSI1_DATA_5 0x0100 0x0448 0x06B4 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA12__GPIO3_IO_13 0x0100 0x0448 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA12__SRC_BT_CFG_12 0x0100 0x0448 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA12__SIM_M_HBURST_1 0x0100 0x0448 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA12__VADC_TEST_17 0x0100 0x0448 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA12__MMDC_DEBUG_17 0x0100 0x0448 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x0104 0x044C 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA13__WEIM_AD_13 0x0104 0x044C 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA13__KITTEN_TRACE_13 0x0104 0x044C 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA13__CSI1_DATA_4 0x0104 0x044C 0x06B0 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA13__GPIO3_IO_14 0x0104 0x044C 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA13__SRC_BT_CFG_13 0x0104 0x044C 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA13__SIM_M_HBURST_2 0x0104 0x044C 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA13__VADC_TEST_18 0x0104 0x044C 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA13__MMDC_DEBUG_18 0x0104 0x044C 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x0108 0x0450 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA14__WEIM_AD_14 0x0108 0x0450 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA14__KITTEN_TRACE_14 0x0108 0x0450 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA14__CSI1_DATA_3 0x0108 0x0450 0x06AC 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA14__GPIO3_IO_15 0x0108 0x0450 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA14__SRC_BT_CFG_14 0x0108 0x0450 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA14__SIM_M_HMASTLOCK 0x0108 0x0450 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA14__VADC_TEST_19 0x0108 0x0450 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA14__MMDC_DEBUG_19 0x0108 0x0450 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x010C 0x0454 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA15__WEIM_AD_15 0x010C 0x0454 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA15__KITTEN_TRACE_15 0x010C 0x0454 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA15__CSI1_DATA_2 0x010C 0x0454 0x06A8 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA15__GPIO3_IO_16 0x010C 0x0454 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA15__SRC_BT_CFG_15 0x010C 0x0454 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA15__SIM_M_HPROT_0 0x010C 0x0454 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA15__VDEC_DEBUG_0 0x010C 0x0454 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA15__MMDC_DEBUG_20 0x010C 0x0454 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x0110 0x0458 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA16__WEIM_ADDR_16 0x0110 0x0458 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA16__M4_TRACE_CLK 0x0110 0x0458 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA16__KITTEN_TRACE_CLK 0x0110 0x0458 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA16__CSI1_DATA_1 0x0110 0x0458 0x06A4 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA16__GPIO3_IO_17 0x0110 0x0458 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA16__SRC_BT_CFG_24 0x0110 0x0458 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA16__SIM_M_HPROT_1 0x0110 0x0458 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA16__VDEC_DEBUG_1 0x0110 0x0458 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA16__MMDC_DEBUG_21 0x0110 0x0458 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x0114 0x045C 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA17__WEIM_ADDR_17 0x0114 0x045C 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA17__KITTEN_TRACE_CTL 0x0114 0x045C 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA17__CSI1_DATA_0 0x0114 0x045C 0x06A0 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA17__GPIO3_IO_18 0x0114 0x045C 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA17__SRC_BT_CFG_25 0x0114 0x045C 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA17__SIM_M_HPROT_2 0x0114 0x045C 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA17__VDEC_DEBUG_2 0x0114 0x045C 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA17__MMDC_DEBUG_22 0x0114 0x045C 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x0118 0x0460 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA18__WEIM_ADDR_18 0x0118 0x0460 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA18__M4_EVENTO 0x0118 0x0460 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA18__KITTEN_EVENTO 0x0118 0x0460 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA18__CSI1_DATA_15 0x0118 0x0460 0x06D8 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA18__GPIO3_IO_19 0x0118 0x0460 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA18__SRC_BT_CFG_26 0x0118 0x0460 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA18__SIM_M_HPROT_3 0x0118 0x0460 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA18__VDEC_DEBUG_3 0x0118 0x0460 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA18__MMDC_DEBUG_23 0x0118 0x0460 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x011C 0x0464 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA19__WEIM_ADDR_19 0x011C 0x0464 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA19__M4_TRACE_SWO 0x011C 0x0464 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA19__CSI1_DATA_14 0x011C 0x0464 0x06D4 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA19__GPIO3_IO_20 0x011C 0x0464 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA19__SRC_BT_CFG_27 0x011C 0x0464 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA19__SIM_M_HREADYOUT 0x011C 0x0464 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA19__VDEC_DEBUG_4 0x011C 0x0464 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA19__MMDC_DEBUG_24 0x011C 0x0464 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x0120 0x0468 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA20__WEIM_ADDR_20 0x0120 0x0468 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA20__PWM8_OUT 0x0120 0x0468 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA20__ENET1_1588_EVENT2_OUT 0x0120 0x0468 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA20__CSI1_DATA_13 0x0120 0x0468 0x06D0 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA20__GPIO3_IO_21 0x0120 0x0468 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA20__SRC_BT_CFG_28 0x0120 0x0468 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA20__SIM_M_HRESP 0x0120 0x0468 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA20__VDEC_DEBUG_5 0x0120 0x0468 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA20__MMDC_DEBUG_25 0x0120 0x0468 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x0124 0x046C 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA21__WEIM_ADDR_21 0x0124 0x046C 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA21__PWM7_OUT 0x0124 0x046C 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA21__ENET1_1588_EVENT3_OUT 0x0124 0x046C 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA21__CSI1_DATA_12 0x0124 0x046C 0x06CC 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA21__GPIO3_IO_22 0x0124 0x046C 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA21__SRC_BT_CFG_29 0x0124 0x046C 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA21__SIM_M_HSIZE_0 0x0124 0x046C 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA21__VDEC_DEBUG_6 0x0124 0x046C 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA21__MMDC_DEBUG_26 0x0124 0x046C 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x0128 0x0470 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA22__WEIM_ADDR_22 0x0128 0x0470 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA22__PWM6_OUT 0x0128 0x0470 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA22__ENET2_1588_EVENT2_OUT 0x0128 0x0470 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA22__CSI1_DATA_11 0x0128 0x0470 0x06C8 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA22__GPIO3_IO_23 0x0128 0x0470 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA22__SRC_BT_CFG_30 0x0128 0x0470 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA22__SIM_M_HSIZE_1 0x0128 0x0470 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA22__VDEC_DEBUG_7 0x0128 0x0470 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA22__MMDC_DEBUG_27 0x0128 0x0470 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x012C 0x0474 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA23__WEIM_ADDR_23 0x012C 0x0474 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA23__PWM5_OUT 0x012C 0x0474 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA23__ENET2_1588_EVENT3_OUT 0x012C 0x0474 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA23__CSI1_DATA_10 0x012C 0x0474 0x06FC 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA23__GPIO3_IO_24 0x012C 0x0474 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA23__SRC_BT_CFG_31 0x012C 0x0474 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA23__SIM_M_HSIZE_2 0x012C 0x0474 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA23__VDEC_DEBUG_8 0x012C 0x0474 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA23__MMDC_DEBUG_28 0x012C 0x0474 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x0130 0x0478 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_RD_E 0x0130 0x0478 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_ENABLE__AUDMUX_AUD3_TXC 0x0130 0x0478 0x063C 0x2 0x1 +#define MX6SX_PAD_LCD1_ENABLE__ENET1_1588_EVENT3_IN 0x0130 0x0478 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_ENABLE__CSI1_DATA_17 0x0130 0x0478 0x06E0 0x4 0x0 +#define MX6SX_PAD_LCD1_ENABLE__GPIO3_IO_25 0x0130 0x0478 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_ENABLE__USDHC1_CD_B 0x0130 0x0478 0x0864 0x6 0x0 +#define MX6SX_PAD_LCD1_ENABLE__SIM_M_HADDR_17 0x0130 0x0478 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_ENABLE__VADC_TEST_1 0x0130 0x0478 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_ENABLE__MMDC_DEBUG_1 0x0130 0x0478 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x0134 0x047C 0x07E0 0x0 0x0 +#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_RS 0x0134 0x047C 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_HSYNC__AUDMUX_AUD3_TXD 0x0134 0x047C 0x0630 0x2 0x1 +#define MX6SX_PAD_LCD1_HSYNC__ENET2_1588_EVENT2_IN 0x0134 0x047C 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_HSYNC__CSI1_DATA_18 0x0134 0x047C 0x06E4 0x4 0x0 +#define MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26 0x0134 0x047C 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_HSYNC__USDHC2_WP 0x0134 0x047C 0x0870 0x6 0x0 +#define MX6SX_PAD_LCD1_HSYNC__SIM_M_HADDR_18 0x0134 0x047C 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_HSYNC__VADC_TEST_2 0x0134 0x047C 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_HSYNC__MMDC_DEBUG_2 0x0134 0x047C 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_RESET__LCDIF1_RESET 0x0138 0x0480 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_RESET__LCDIF1_CS 0x0138 0x0480 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_RESET__AUDMUX_AUD3_RXD 0x0138 0x0480 0x062C 0x2 0x1 +#define MX6SX_PAD_LCD1_RESET__KITTEN_EVENTI 0x0138 0x0480 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_RESET__M4_EVENTI 0x0138 0x0480 0x0000 0x4 0x0 +#define MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x0138 0x0480 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_RESET__CCM_PMIC_RDY 0x0138 0x0480 0x069C 0x6 0x0 +#define MX6SX_PAD_LCD1_RESET__SIM_M_HADDR_20 0x0138 0x0480 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_RESET__VADC_TEST_4 0x0138 0x0480 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_RESET__MMDC_DEBUG_4 0x0138 0x0480 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x013C 0x0484 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_BUSY 0x013C 0x0484 0x07E0 0x1 0x1 +#define MX6SX_PAD_LCD1_VSYNC__AUDMUX_AUD3_TXFS 0x013C 0x0484 0x0640 0x2 0x1 +#define MX6SX_PAD_LCD1_VSYNC__ENET2_1588_EVENT3_IN 0x013C 0x0484 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_VSYNC__CSI1_DATA_19 0x013C 0x0484 0x06E8 0x4 0x0 +#define MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28 0x013C 0x0484 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_VSYNC__USDHC2_CD_B 0x013C 0x0484 0x086C 0x6 0x0 +#define MX6SX_PAD_LCD1_VSYNC__SIM_M_HADDR_19 0x013C 0x0484 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_VSYNC__VADC_TEST_3 0x013C 0x0484 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_VSYNC__MMDC_DEBUG_3 0x013C 0x0484 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_ALE__RAWNAND_ALE 0x0140 0x0488 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_ALE__I2C3_SDA 0x0140 0x0488 0x07BC 0x1 0x0 +#define MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x0140 0x0488 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_ALE__ECSPI2_SS0 0x0140 0x0488 0x072C 0x3 0x0 +#define MX6SX_PAD_NAND_ALE__ESAI_TX3_RX2 0x0140 0x0488 0x079C 0x4 0x0 +#define MX6SX_PAD_NAND_ALE__GPIO4_IO_0 0x0140 0x0488 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_ALE__WEIM_CS0_B 0x0140 0x0488 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_ALE__TPSMP_HDATA_0 0x0140 0x0488 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_ALE__ANATOP_USBPHY1_TSTI_TX_EN 0x0140 0x0488 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_ALE__SDMA_DEBUG_PC_12 0x0140 0x0488 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0144 0x048C 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_CE0_B__USDHC2_VSELECT 0x0144 0x048C 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x0144 0x048C 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_CE0_B__AUDMUX_AUD4_TXC 0x0144 0x048C 0x0654 0x3 0x0 +#define MX6SX_PAD_NAND_CE0_B__ESAI_TX_CLK 0x0144 0x048C 0x078C 0x4 0x0 +#define MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1 0x0144 0x048C 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_CE0_B__WEIM_LBA_B 0x0144 0x048C 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_CE0_B__TPSMP_HDATA_3 0x0144 0x048C 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_CE0_B__ANATOP_USBPHY1_TSTI_TX_HIZ 0x0144 0x048C 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_CE0_B__SDMA_DEBUG_PC_9 0x0144 0x048C 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_CE1_B__RAWNAND_CE1_B 0x0148 0x0490 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_CE1_B__USDHC3_RESET_B 0x0148 0x0490 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x0148 0x0490 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_CE1_B__AUDMUX_AUD4_TXD 0x0148 0x0490 0x0648 0x3 0x0 +#define MX6SX_PAD_NAND_CE1_B__ESAI_TX0 0x0148 0x0490 0x0790 0x4 0x0 +#define MX6SX_PAD_NAND_CE1_B__GPIO4_IO_2 0x0148 0x0490 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_CE1_B__WEIM_OE 0x0148 0x0490 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_CE1_B__TPSMP_HDATA_4 0x0148 0x0490 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_CE1_B__ANATOP_USBPHY1_TSTI_TX_LS_MODE 0x0148 0x0490 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_CE1_B__SDMA_DEBUG_PC_8 0x0148 0x0490 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_CLE__RAWNAND_CLE 0x014C 0x0494 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_CLE__I2C3_SCL 0x014C 0x0494 0x07B8 0x1 0x0 +#define MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x014C 0x0494 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_CLE__ECSPI2_SCLK 0x014C 0x0494 0x0720 0x3 0x0 +#define MX6SX_PAD_NAND_CLE__ESAI_TX2_RX3 0x014C 0x0494 0x0798 0x4 0x0 +#define MX6SX_PAD_NAND_CLE__GPIO4_IO_3 0x014C 0x0494 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_CLE__WEIM_BCLK 0x014C 0x0494 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_CLE__TPSMP_CLK 0x014C 0x0494 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_CLE__ANATOP_USBPHY1_TSTI_TX_DP 0x014C 0x0494 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_CLE__SDMA_DEBUG_PC_13 0x014C 0x0494 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_DATA00__RAWNAND_DATA00 0x0150 0x0498 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_DATA00__USDHC1_DATA4 0x0150 0x0498 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x0150 0x0498 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_DATA00__ECSPI5_MISO 0x0150 0x0498 0x0754 0x3 0x0 +#define MX6SX_PAD_NAND_DATA00__ESAI_RX_CLK 0x0150 0x0498 0x0788 0x4 0x0 +#define MX6SX_PAD_NAND_DATA00__GPIO4_IO_4 0x0150 0x0498 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_DATA00__WEIM_AD_0 0x0150 0x0498 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_DATA00__TPSMP_HDATA_7 0x0150 0x0498 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_DATA00__ANATOP_USBPHY1_TSTO_RX_DISCON_DET 0x0150 0x0498 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_DATA00__SDMA_DEBUG_EVT_CHN_LINES_5 0x0150 0x0498 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_DATA01__RAWNAND_DATA01 0x0154 0x049C 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_DATA01__USDHC1_DATA5 0x0154 0x049C 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x0154 0x049C 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_DATA01__ECSPI5_MOSI 0x0154 0x049C 0x0758 0x3 0x0 +#define MX6SX_PAD_NAND_DATA01__ESAI_RX_FS 0x0154 0x049C 0x0778 0x4 0x0 +#define MX6SX_PAD_NAND_DATA01__GPIO4_IO_5 0x0154 0x049C 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_DATA01__WEIM_AD_1 0x0154 0x049C 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_DATA01__TPSMP_HDATA_8 0x0154 0x049C 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_DATA01__ANATOP_USBPHY1_TSTO_RX_HS_RXD 0x0154 0x049C 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_DATA01__SDMA_DEBUG_EVT_CHN_LINES_4 0x0154 0x049C 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_DATA02__RAWNAND_DATA02 0x0158 0x04A0 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_DATA02__USDHC1_DATA6 0x0158 0x04A0 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x0158 0x04A0 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_DATA02__ECSPI5_SCLK 0x0158 0x04A0 0x0750 0x3 0x0 +#define MX6SX_PAD_NAND_DATA02__ESAI_TX_HF_CLK 0x0158 0x04A0 0x0784 0x4 0x0 +#define MX6SX_PAD_NAND_DATA02__GPIO4_IO_6 0x0158 0x04A0 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_DATA02__WEIM_AD_2 0x0158 0x04A0 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_DATA02__TPSMP_HDATA_9 0x0158 0x04A0 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_DATA02__ANATOP_USBPHY2_TSTO_PLL_CLK20DIV 0x0158 0x04A0 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_DATA02__SDMA_DEBUG_EVT_CHN_LINES_3 0x0158 0x04A0 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_DATA03__RAWNAND_DATA03 0x015C 0x04A4 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_DATA03__USDHC1_DATA7 0x015C 0x04A4 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x015C 0x04A4 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_DATA03__ECSPI5_SS0 0x015C 0x04A4 0x075C 0x3 0x0 +#define MX6SX_PAD_NAND_DATA03__ESAI_RX_HF_CLK 0x015C 0x04A4 0x0780 0x4 0x0 +#define MX6SX_PAD_NAND_DATA03__GPIO4_IO_7 0x015C 0x04A4 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_DATA03__WEIM_AD_3 0x015C 0x04A4 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_DATA03__TPSMP_HDATA_10 0x015C 0x04A4 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_DATA03__ANATOP_USBPHY1_TSTO_RX_SQUELCH 0x015C 0x04A4 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_DATA03__SDMA_DEBUG_EVT_CHN_LINES_6 0x015C 0x04A4 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_DATA04__RAWNAND_DATA04 0x0160 0x04A8 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_DATA04__USDHC2_DATA4 0x0160 0x04A8 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_DATA04__QSPI2_B_SS1_B 0x0160 0x04A8 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B 0x0160 0x04A8 0x083C 0x3 0x0 +#define MX6SX_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS 0x0160 0x04A8 0x0650 0x4 0x0 +#define MX6SX_PAD_NAND_DATA04__GPIO4_IO_8 0x0160 0x04A8 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_DATA04__WEIM_AD_4 0x0160 0x04A8 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_DATA04__TPSMP_HDATA_11 0x0160 0x04A8 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_DATA04__ANATOP_USBPHY2_TSTO_RX_SQUELCH 0x0160 0x04A8 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_DATA04__SDMA_DEBUG_CORE_STATE_0 0x0160 0x04A8 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05 0x0164 0x04AC 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5 0x0164 0x04AC 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS 0x0164 0x04AC 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x083C 0x3 0x1 +#define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC 0x0164 0x04AC 0x064C 0x4 0x0 +#define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0x0164 0x04AC 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_DATA05__WEIM_AD_5 0x0164 0x04AC 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_DATA05__TPSMP_HDATA_12 0x0164 0x04AC 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_DATA05__ANATOP_USBPHY2_TSTO_RX_DISCON_DET 0x0164 0x04AC 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_DATA05__SDMA_DEBUG_CORE_STATE_1 0x0164 0x04AC 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_DATA06__RAWNAND_DATA06 0x0168 0x04B0 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_DATA06__USDHC2_DATA6 0x0168 0x04B0 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_DATA06__QSPI2_A_SS1_B 0x0168 0x04B0 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_DATA06__UART3_RX 0x0168 0x04B0 0x0840 0x3 0x0 +#define MX6SX_PAD_NAND_DATA06__UART3_TX 0x0168 0x04B0 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA06__PWM3_OUT 0x0168 0x04B0 0x0000 0x4 0x0 +#define MX6SX_PAD_NAND_DATA06__GPIO4_IO_10 0x0168 0x04B0 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_DATA06__WEIM_AD_6 0x0168 0x04B0 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_DATA06__TPSMP_HDATA_13 0x0168 0x04B0 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_DATA06__ANATOP_USBPHY2_TSTO_RX_FS_RXD 0x0168 0x04B0 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_DATA06__SDMA_DEBUG_CORE_STATE_2 0x0168 0x04B0 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_DATA07__RAWNAND_DATA07 0x016C 0x04B4 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_DATA07__USDHC2_DATA7 0x016C 0x04B4 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS 0x016C 0x04B4 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_DATA07__UART3_RX 0x016C 0x04B4 0x0840 0x3 0x1 +#define MX6SX_PAD_NAND_DATA07__UART3_TX 0x016C 0x04B4 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA07__PWM4_OUT 0x016C 0x04B4 0x0000 0x4 0x0 +#define MX6SX_PAD_NAND_DATA07__GPIO4_IO_11 0x016C 0x04B4 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_DATA07__WEIM_AD_7 0x016C 0x04B4 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_DATA07__TPSMP_HDATA_14 0x016C 0x04B4 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_DATA07__ANATOP_USBPHY1_TSTO_RX_FS_RXD 0x016C 0x04B4 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_DATA07__SDMA_DEBUG_CORE_STATE_3 0x016C 0x04B4 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_RE_B__RAWNAND_RE_B 0x0170 0x04B8 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_RE_B__USDHC2_RESET_B 0x0170 0x04B8 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x0170 0x04B8 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_RE_B__AUDMUX_AUD4_TXFS 0x0170 0x04B8 0x0658 0x3 0x0 +#define MX6SX_PAD_NAND_RE_B__ESAI_TX_FS 0x0170 0x04B8 0x077C 0x4 0x0 +#define MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x0170 0x04B8 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_RE_B__WEIM_RW 0x0170 0x04B8 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_RE_B__TPSMP_HDATA_5 0x0170 0x04B8 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_RE_B__ANATOP_USBPHY2_TSTO_RX_HS_RXD 0x0170 0x04B8 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_RE_B__SDMA_DEBUG_PC_7 0x0170 0x04B8 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_READY_B__RAWNAND_READY_B 0x0174 0x04BC 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_READY_B__USDHC1_VSELECT 0x0174 0x04BC 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x0174 0x04BC 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_READY_B__ECSPI2_MISO 0x0174 0x04BC 0x0724 0x3 0x0 +#define MX6SX_PAD_NAND_READY_B__ESAI_TX1 0x0174 0x04BC 0x0794 0x4 0x0 +#define MX6SX_PAD_NAND_READY_B__GPIO4_IO_13 0x0174 0x04BC 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_READY_B__WEIM_EB_B_1 0x0174 0x04BC 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_READY_B__TPSMP_HDATA_2 0x0174 0x04BC 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_READY_B__ANATOP_USBPHY1_TSTI_TX_DN 0x0174 0x04BC 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_READY_B__SDMA_DEBUG_PC_10 0x0174 0x04BC 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_WE_B__RAWNAND_WE_B 0x0178 0x04C0 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_WE_B__USDHC4_VSELECT 0x0178 0x04C0 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x0178 0x04C0 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_WE_B__AUDMUX_AUD4_RXD 0x0178 0x04C0 0x0644 0x3 0x0 +#define MX6SX_PAD_NAND_WE_B__ESAI_TX5_RX0 0x0178 0x04C0 0x07A4 0x4 0x0 +#define MX6SX_PAD_NAND_WE_B__GPIO4_IO_14 0x0178 0x04C0 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_WE_B__WEIM_WAIT 0x0178 0x04C0 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_WE_B__TPSMP_HDATA_6 0x0178 0x04C0 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_WE_B__ANATOP_USBPHY1_TSTO_PLL_CLK20DIV 0x0178 0x04C0 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_WE_B__SDMA_DEBUG_PC_6 0x0178 0x04C0 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_WP_B__RAWNAND_WP_B 0x017C 0x04C4 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_WP_B__USDHC1_RESET_B 0x017C 0x04C4 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x017C 0x04C4 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_WP_B__ECSPI2_MOSI 0x017C 0x04C4 0x0728 0x3 0x0 +#define MX6SX_PAD_NAND_WP_B__ESAI_TX4_RX1 0x017C 0x04C4 0x07A0 0x4 0x0 +#define MX6SX_PAD_NAND_WP_B__GPIO4_IO_15 0x017C 0x04C4 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_WP_B__WEIM_EB_B_0 0x017C 0x04C4 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_WP_B__TPSMP_HDATA_1 0x017C 0x04C4 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_WP_B__ANATOP_USBPHY1_TSTI_TX_HS_MODE 0x017C 0x04C4 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_WP_B__SDMA_DEBUG_PC_11 0x017C 0x04C4 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0 0x0180 0x04C8 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC 0x0180 0x04C8 0x085C 0x1 0x2 +#define MX6SX_PAD_QSPI1A_DATA0__ECSPI1_MOSI 0x0180 0x04C8 0x0718 0x2 0x1 +#define MX6SX_PAD_QSPI1A_DATA0__ESAI_TX4_RX1 0x0180 0x04C8 0x07A0 0x3 0x2 +#define MX6SX_PAD_QSPI1A_DATA0__CSI1_DATA_14 0x0180 0x04C8 0x06D4 0x4 0x1 +#define MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x0180 0x04C8 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1A_DATA0__WEIM_DATA_6 0x0180 0x04C8 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1A_DATA0__SIM_M_HADDR_3 0x0180 0x04C8 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1A_DATA0__SDMA_DEBUG_BUS_DEVICE_3 0x0180 0x04C8 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1 0x0184 0x04CC 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1A_DATA1__ANATOP_OTG1_ID 0x0184 0x04CC 0x0624 0x1 0x2 +#define MX6SX_PAD_QSPI1A_DATA1__ECSPI1_MISO 0x0184 0x04CC 0x0714 0x2 0x1 +#define MX6SX_PAD_QSPI1A_DATA1__ESAI_TX1 0x0184 0x04CC 0x0794 0x3 0x2 +#define MX6SX_PAD_QSPI1A_DATA1__CSI1_DATA_13 0x0184 0x04CC 0x06D0 0x4 0x1 +#define MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17 0x0184 0x04CC 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1A_DATA1__WEIM_DATA_5 0x0184 0x04CC 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1A_DATA1__SIM_M_HADDR_4 0x0184 0x04CC 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1A_DATA1__SDMA_DEBUG_PC_0 0x0184 0x04CC 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2 0x0188 0x04D0 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1A_DATA2__USB_OTG1_PWR 0x0188 0x04D0 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1A_DATA2__ECSPI5_SS1 0x0188 0x04D0 0x0000 0x2 0x0 +#define MX6SX_PAD_QSPI1A_DATA2__ESAI_TX_CLK 0x0188 0x04D0 0x078C 0x3 0x2 +#define MX6SX_PAD_QSPI1A_DATA2__CSI1_DATA_12 0x0188 0x04D0 0x06CC 0x4 0x1 +#define MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18 0x0188 0x04D0 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1A_DATA2__WEIM_DATA_4 0x0188 0x04D0 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1A_DATA2__SIM_M_HADDR_6 0x0188 0x04D0 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1A_DATA2__SDMA_DEBUG_PC_1 0x0188 0x04D0 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3 0x018C 0x04D4 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1A_DATA3__USB_OTG1_OC 0x018C 0x04D4 0x0860 0x1 0x2 +#define MX6SX_PAD_QSPI1A_DATA3__ECSPI5_SS2 0x018C 0x04D4 0x0000 0x2 0x0 +#define MX6SX_PAD_QSPI1A_DATA3__ESAI_TX0 0x018C 0x04D4 0x0790 0x3 0x2 +#define MX6SX_PAD_QSPI1A_DATA3__CSI1_DATA_11 0x018C 0x04D4 0x06C8 0x4 0x1 +#define MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x018C 0x04D4 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1A_DATA3__WEIM_DATA_3 0x018C 0x04D4 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1A_DATA3__SIM_M_HADDR_7 0x018C 0x04D4 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1A_DATA3__SDMA_DEBUG_PC_2 0x018C 0x04D4 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1A_DQS__QSPI1_A_DQS 0x0190 0x04D8 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x0190 0x04D8 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1A_DQS__CANFD_TX2 0x0190 0x04D8 0x0000 0x2 0x0 +#define MX6SX_PAD_QSPI1A_DQS__ECSPI5_MOSI 0x0190 0x04D8 0x0758 0x3 0x1 +#define MX6SX_PAD_QSPI1A_DQS__CSI1_DATA_15 0x0190 0x04D8 0x06D8 0x4 0x1 +#define MX6SX_PAD_QSPI1A_DQS__GPIO4_IO_20 0x0190 0x04D8 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1A_DQS__WEIM_DATA_7 0x0190 0x04D8 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1A_DQS__SIM_M_HADDR_13 0x0190 0x04D8 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1A_DQS__SDMA_DEBUG_BUS_DEVICE_4 0x0190 0x04D8 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1A_SCLK__QSPI1_A_SCLK 0x0194 0x04DC 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1A_SCLK__ANATOP_OTG2_ID 0x0194 0x04DC 0x0628 0x1 0x2 +#define MX6SX_PAD_QSPI1A_SCLK__ECSPI1_SCLK 0x0194 0x04DC 0x0710 0x2 0x1 +#define MX6SX_PAD_QSPI1A_SCLK__ESAI_TX2_RX3 0x0194 0x04DC 0x0798 0x3 0x2 +#define MX6SX_PAD_QSPI1A_SCLK__CSI1_DATA_1 0x0194 0x04DC 0x06A4 0x4 0x1 +#define MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21 0x0194 0x04DC 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1A_SCLK__WEIM_DATA_0 0x0194 0x04DC 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1A_SCLK__SIM_M_HADDR_0 0x0194 0x04DC 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1A_SCLK__SDMA_DEBUG_PC_5 0x0194 0x04DC 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B 0x0198 0x04E0 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1A_SS0_B__USB_OTG2_PWR 0x0198 0x04E0 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1A_SS0_B__ECSPI1_SS0 0x0198 0x04E0 0x071C 0x2 0x1 +#define MX6SX_PAD_QSPI1A_SS0_B__ESAI_TX3_RX2 0x0198 0x04E0 0x079C 0x3 0x2 +#define MX6SX_PAD_QSPI1A_SS0_B__CSI1_DATA_0 0x0198 0x04E0 0x06A0 0x4 0x1 +#define MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22 0x0198 0x04E0 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1A_SS0_B__WEIM_DATA_1 0x0198 0x04E0 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1A_SS0_B__SIM_M_HADDR_1 0x0198 0x04E0 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1A_SS0_B__SDMA_DEBUG_PC_4 0x0198 0x04E0 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1A_SS1_B__QSPI1_A_SS1_B 0x019C 0x04E4 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x019C 0x04E4 0x068C 0x1 0x2 +#define MX6SX_PAD_QSPI1A_SS1_B__CANFD_RX1 0x019C 0x04E4 0x0694 0x2 0x2 +#define MX6SX_PAD_QSPI1A_SS1_B__ECSPI5_MISO 0x019C 0x04E4 0x0754 0x3 0x1 +#define MX6SX_PAD_QSPI1A_SS1_B__CSI1_DATA_10 0x019C 0x04E4 0x06FC 0x4 0x1 +#define MX6SX_PAD_QSPI1A_SS1_B__GPIO4_IO_23 0x019C 0x04E4 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1A_SS1_B__WEIM_DATA_2 0x019C 0x04E4 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12 0x019C 0x04E4 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3 0x019C 0x04E4 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x01A0 0x04E8 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x083C 0x1 0x4 +#define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI 0x01A0 0x04E8 0x0738 0x2 0x1 +#define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS 0x01A0 0x04E8 0x0778 0x3 0x2 +#define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22 0x01A0 0x04E8 0x06F4 0x4 0x1 +#define MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24 0x01A0 0x04E8 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1B_DATA0__WEIM_DATA_14 0x01A0 0x04E8 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1B_DATA0__SIM_M_HADDR_9 0x01A0 0x04E8 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1 0x01A4 0x04EC 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B 0x01A4 0x04EC 0x083C 0x1 0x5 +#define MX6SX_PAD_QSPI1B_DATA1__ECSPI3_MISO 0x01A4 0x04EC 0x0734 0x2 0x1 +#define MX6SX_PAD_QSPI1B_DATA1__ESAI_RX_CLK 0x01A4 0x04EC 0x0788 0x3 0x2 +#define MX6SX_PAD_QSPI1B_DATA1__CSI1_DATA_21 0x01A4 0x04EC 0x06F0 0x4 0x1 +#define MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25 0x01A4 0x04EC 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1B_DATA1__WEIM_DATA_13 0x01A4 0x04EC 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1B_DATA1__SIM_M_HADDR_8 0x01A4 0x04EC 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2 0x01A8 0x04F0 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_DATA2__I2C2_SDA 0x01A8 0x04F0 0x07B4 0x1 0x2 +#define MX6SX_PAD_QSPI1B_DATA2__ECSPI5_RDY 0x01A8 0x04F0 0x0000 0x2 0x0 +#define MX6SX_PAD_QSPI1B_DATA2__ESAI_TX5_RX0 0x01A8 0x04F0 0x07A4 0x3 0x2 +#define MX6SX_PAD_QSPI1B_DATA2__CSI1_DATA_20 0x01A8 0x04F0 0x06EC 0x4 0x1 +#define MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26 0x01A8 0x04F0 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1B_DATA2__WEIM_DATA_12 0x01A8 0x04F0 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1B_DATA2__SIM_M_HADDR_5 0x01A8 0x04F0 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3 0x01AC 0x04F4 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_DATA3__I2C2_SCL 0x01AC 0x04F4 0x07B0 0x1 0x2 +#define MX6SX_PAD_QSPI1B_DATA3__ECSPI5_SS3 0x01AC 0x04F4 0x0000 0x2 0x0 +#define MX6SX_PAD_QSPI1B_DATA3__ESAI_TX_FS 0x01AC 0x04F4 0x077C 0x3 0x2 +#define MX6SX_PAD_QSPI1B_DATA3__CSI1_DATA_19 0x01AC 0x04F4 0x06E8 0x4 0x1 +#define MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x01AC 0x04F4 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1B_DATA3__WEIM_DATA_11 0x01AC 0x04F4 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1B_DATA3__SIM_M_HADDR_2 0x01AC 0x04F4 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1B_DQS__QSPI1_B_DQS 0x01B0 0x04F8 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x01B0 0x04F8 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1B_DQS__CANFD_TX1 0x01B0 0x04F8 0x0000 0x2 0x0 +#define MX6SX_PAD_QSPI1B_DQS__ECSPI5_SS0 0x01B0 0x04F8 0x075C 0x3 0x1 +#define MX6SX_PAD_QSPI1B_DQS__CSI1_DATA_23 0x01B0 0x04F8 0x06F8 0x4 0x1 +#define MX6SX_PAD_QSPI1B_DQS__GPIO4_IO_28 0x01B0 0x04F8 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1B_DQS__WEIM_DATA_15 0x01B0 0x04F8 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15 0x01B0 0x04F8 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK 0x01B4 0x04FC 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x01B4 0x04FC 0x0840 0x1 0x4 +#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX 0x01B4 0x04FC 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK 0x01B4 0x04FC 0x0730 0x2 0x1 +#define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK 0x01B4 0x04FC 0x0780 0x3 0x2 +#define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16 0x01B4 0x04FC 0x06DC 0x4 0x1 +#define MX6SX_PAD_QSPI1B_SCLK__GPIO4_IO_29 0x01B4 0x04FC 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1B_SCLK__WEIM_DATA_8 0x01B4 0x04FC 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1B_SCLK__SIM_M_HADDR_11 0x01B4 0x04FC 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B 0x01B8 0x0500 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX 0x01B8 0x0500 0x0840 0x1 0x5 +#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x01B8 0x0500 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1B_SS0_B__ECSPI3_SS0 0x01B8 0x0500 0x073C 0x2 0x1 +#define MX6SX_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK 0x01B8 0x0500 0x0784 0x3 0x3 +#define MX6SX_PAD_QSPI1B_SS0_B__CSI1_DATA_17 0x01B8 0x0500 0x06E0 0x4 0x1 +#define MX6SX_PAD_QSPI1B_SS0_B__GPIO4_IO_30 0x01B8 0x0500 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1B_SS0_B__WEIM_DATA_9 0x01B8 0x0500 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1B_SS0_B__SIM_M_HADDR_10 0x01B8 0x0500 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1B_SS1_B__QSPI1_B_SS1_B 0x01BC 0x0504 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x01BC 0x0504 0x0690 0x1 0x2 +#define MX6SX_PAD_QSPI1B_SS1_B__CANFD_RX2 0x01BC 0x0504 0x0698 0x2 0x2 +#define MX6SX_PAD_QSPI1B_SS1_B__ECSPI5_SCLK 0x01BC 0x0504 0x0750 0x3 0x1 +#define MX6SX_PAD_QSPI1B_SS1_B__CSI1_DATA_18 0x01BC 0x0504 0x06E4 0x4 0x1 +#define MX6SX_PAD_QSPI1B_SS1_B__GPIO4_IO_31 0x01BC 0x0504 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1B_SS1_B__WEIM_DATA_10 0x01BC 0x0504 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1B_SS1_B__SIM_M_HADDR_14 0x01BC 0x0504 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x01C0 0x0508 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_RD0__GPIO5_IO_0 0x01C0 0x0508 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_RD0__CSI2_DATA_10 0x01C0 0x0508 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_RD0__ANATOP_TESTI_0 0x01C0 0x0508 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_RD0__RAWNAND_TESTER_TRIGGER 0x01C0 0x0508 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_RD0__PCIE_CTRL_DEBUG_0 0x01C0 0x0508 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x01C4 0x050C 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_RD1__GPIO5_IO_1 0x01C4 0x050C 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_RD1__CSI2_DATA_11 0x01C4 0x050C 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_RD1__ANATOP_TESTI_1 0x01C4 0x050C 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_RD1__USDHC1_TESTER_TRIGGER 0x01C4 0x050C 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_RD1__PCIE_CTRL_DEBUG_1 0x01C4 0x050C 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x01C8 0x0510 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_RD2__GPIO5_IO_2 0x01C8 0x0510 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_RD2__CSI2_DATA_12 0x01C8 0x0510 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_RD2__ANATOP_TESTI_2 0x01C8 0x0510 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_RD2__USDHC2_TESTER_TRIGGER 0x01C8 0x0510 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_RD2__PCIE_CTRL_DEBUG_2 0x01C8 0x0510 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x01CC 0x0514 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_RD3__GPIO5_IO_3 0x01CC 0x0514 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_RD3__CSI2_DATA_13 0x01CC 0x0514 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_RD3__ANATOP_TESTI_3 0x01CC 0x0514 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_RD3__USDHC3_TESTER_TRIGGER 0x01CC 0x0514 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_RD3__PCIE_CTRL_DEBUG_3 0x01CC 0x0514 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x01D0 0x0518 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_RX_CTL__GPIO5_IO_4 0x01D0 0x0518 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_RX_CTL__CSI2_DATA_14 0x01D0 0x0518 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_RX_CTL__ANATOP_TESTO_0 0x01D0 0x0518 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_RX_CTL__USDHC4_TESTER_TRIGGER 0x01D0 0x0518 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_RX_CTL__PCIE_CTRL_DEBUG_4 0x01D0 0x0518 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x01D4 0x051C 0x0768 0x0 0x1 +#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER 0x01D4 0x051C 0x0000 0x1 0x0 +#define MX6SX_PAD_RGMII1_RXC__GPIO5_IO_5 0x01D4 0x051C 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_RXC__CSI2_DATA_15 0x01D4 0x051C 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_RXC__ANATOP_TESTO_1 0x01D4 0x051C 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_RXC__ECSPI1_TESTER_TRIGGER 0x01D4 0x051C 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_RXC__PCIE_CTRL_DEBUG_5 0x01D4 0x051C 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0x01D8 0x0520 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_TD0__SAI2_RX_SYNC 0x01D8 0x0520 0x0810 0x2 0x1 +#define MX6SX_PAD_RGMII1_TD0__GPIO5_IO_6 0x01D8 0x0520 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_TD0__CSI2_DATA_16 0x01D8 0x0520 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_TD0__ANATOP_TESTO_2 0x01D8 0x0520 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_TD0__ECSPI2_TESTER_TRIGGER 0x01D8 0x0520 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_TD0__PCIE_CTRL_DEBUG_6 0x01D8 0x0520 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0x01DC 0x0524 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_TD1__SAI2_RX_BCLK 0x01DC 0x0524 0x0808 0x2 0x1 +#define MX6SX_PAD_RGMII1_TD1__GPIO5_IO_7 0x01DC 0x0524 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_TD1__CSI2_DATA_17 0x01DC 0x0524 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_TD1__ANATOP_TESTO_3 0x01DC 0x0524 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_TD1__ECSPI3_TESTER_TRIGGER 0x01DC 0x0524 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_TD1__PCIE_CTRL_DEBUG_7 0x01DC 0x0524 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0x01E0 0x0528 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_TD2__SAI2_TX_SYNC 0x01E0 0x0528 0x0818 0x2 0x1 +#define MX6SX_PAD_RGMII1_TD2__GPIO5_IO_8 0x01E0 0x0528 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_TD2__CSI2_DATA_18 0x01E0 0x0528 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_TD2__ANATOP_TESTO_4 0x01E0 0x0528 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_TD2__ECSPI4_TESTER_TRIGGER 0x01E0 0x0528 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_TD2__PCIE_CTRL_DEBUG_8 0x01E0 0x0528 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0x01E4 0x052C 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_TD3__SAI2_TX_BCLK 0x01E4 0x052C 0x0814 0x2 0x1 +#define MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9 0x01E4 0x052C 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_TD3__CSI2_DATA_19 0x01E4 0x052C 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_TD3__ANATOP_TESTO_5 0x01E4 0x052C 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_TD3__ECSPI5_TESTER_TRIGGER 0x01E4 0x052C 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_TD3__PCIE_CTRL_DEBUG_9 0x01E4 0x052C 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0x01E8 0x0530 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_TX_CTL__SAI2_RX_DATA_0 0x01E8 0x0530 0x080C 0x2 0x1 +#define MX6SX_PAD_RGMII1_TX_CTL__GPIO5_IO_10 0x01E8 0x0530 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_TX_CTL__CSI2_DATA_0 0x01E8 0x0530 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_TX_CTL__ANATOP_TESTO_6 0x01E8 0x0530 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_TX_CTL__QSPI1_TESTER_TRIGGER 0x01E8 0x0530 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_TX_CTL__PCIE_CTRL_DEBUG_10 0x01E8 0x0530 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0x01EC 0x0534 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_TXC__ENET1_TX_ER 0x01EC 0x0534 0x0000 0x1 0x0 +#define MX6SX_PAD_RGMII1_TXC__SAI2_TX_DATA_0 0x01EC 0x0534 0x0000 0x2 0x0 +#define MX6SX_PAD_RGMII1_TXC__GPIO5_IO_11 0x01EC 0x0534 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_TXC__CSI2_DATA_1 0x01EC 0x0534 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_TXC__ANATOP_TESTO_7 0x01EC 0x0534 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_TXC__QSPI2_TESTER_TRIGGER 0x01EC 0x0534 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_TXC__PCIE_CTRL_DEBUG_11 0x01EC 0x0534 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x01F0 0x0538 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_RD0__PWM4_OUT 0x01F0 0x0538 0x0000 0x2 0x0 +#define MX6SX_PAD_RGMII2_RD0__GPIO5_IO_12 0x01F0 0x0538 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_RD0__CSI2_DATA_2 0x01F0 0x0538 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_RD0__ANATOP_TESTO_8 0x01F0 0x0538 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_RD0__VDEC_DEBUG_18 0x01F0 0x0538 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_RD0__PCIE_CTRL_DEBUG_12 0x01F0 0x0538 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x01F4 0x053C 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_RD1__PWM3_OUT 0x01F4 0x053C 0x0000 0x2 0x0 +#define MX6SX_PAD_RGMII2_RD1__GPIO5_IO_13 0x01F4 0x053C 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_RD1__CSI2_DATA_3 0x01F4 0x053C 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_RD1__ANATOP_TESTO_9 0x01F4 0x053C 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_RD1__VDEC_DEBUG_19 0x01F4 0x053C 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_RD1__PCIE_CTRL_DEBUG_13 0x01F4 0x053C 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x01F8 0x0540 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_RD2__PWM2_OUT 0x01F8 0x0540 0x0000 0x2 0x0 +#define MX6SX_PAD_RGMII2_RD2__GPIO5_IO_14 0x01F8 0x0540 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_RD2__CSI2_DATA_4 0x01F8 0x0540 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_RD2__ANATOP_TESTO_10 0x01F8 0x0540 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_RD2__VDEC_DEBUG_20 0x01F8 0x0540 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_RD2__PCIE_CTRL_DEBUG_14 0x01F8 0x0540 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x01FC 0x0544 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_RD3__PWM1_OUT 0x01FC 0x0544 0x0000 0x2 0x0 +#define MX6SX_PAD_RGMII2_RD3__GPIO5_IO_15 0x01FC 0x0544 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_RD3__CSI2_DATA_5 0x01FC 0x0544 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_RD3__ANATOP_TESTO_11 0x01FC 0x0544 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_RD3__VDEC_DEBUG_21 0x01FC 0x0544 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_RD3__PCIE_CTRL_DEBUG_15 0x01FC 0x0544 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x0200 0x0548 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_RX_CTL__GPIO5_IO_16 0x0200 0x0548 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_RX_CTL__CSI2_DATA_6 0x0200 0x0548 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_RX_CTL__ANATOP_TESTO_12 0x0200 0x0548 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_RX_CTL__VDEC_DEBUG_22 0x0200 0x0548 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_RX_CTL__PCIE_CTRL_DEBUG_16 0x0200 0x0548 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x0204 0x054C 0x0774 0x0 0x1 +#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_ER 0x0204 0x054C 0x0000 0x1 0x0 +#define MX6SX_PAD_RGMII2_RXC__GPIO5_IO_17 0x0204 0x054C 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_RXC__CSI2_DATA_7 0x0204 0x054C 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_RXC__ANATOP_TESTO_13 0x0204 0x054C 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_RXC__VDEC_DEBUG_23 0x0204 0x054C 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_RXC__PCIE_CTRL_DEBUG_17 0x0204 0x054C 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x0208 0x0550 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_TD0__SAI1_RX_SYNC 0x0208 0x0550 0x07FC 0x2 0x1 +#define MX6SX_PAD_RGMII2_TD0__PWM8_OUT 0x0208 0x0550 0x0000 0x3 0x0 +#define MX6SX_PAD_RGMII2_TD0__GPIO5_IO_18 0x0208 0x0550 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_TD0__CSI2_DATA_8 0x0208 0x0550 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_TD0__ANATOP_TESTO_14 0x0208 0x0550 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_TD0__VDEC_DEBUG_24 0x0208 0x0550 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_TD0__PCIE_CTRL_DEBUG_18 0x0208 0x0550 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x020C 0x0554 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_TD1__SAI1_RX_BCLK 0x020C 0x0554 0x07F4 0x2 0x1 +#define MX6SX_PAD_RGMII2_TD1__PWM7_OUT 0x020C 0x0554 0x0000 0x3 0x0 +#define MX6SX_PAD_RGMII2_TD1__GPIO5_IO_19 0x020C 0x0554 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_TD1__CSI2_DATA_9 0x020C 0x0554 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_TD1__ANATOP_TESTO_15 0x020C 0x0554 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_TD1__VDEC_DEBUG_25 0x020C 0x0554 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_TD1__PCIE_CTRL_DEBUG_19 0x020C 0x0554 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0x0210 0x0558 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_TD2__SAI1_TX_SYNC 0x0210 0x0558 0x0804 0x2 0x1 +#define MX6SX_PAD_RGMII2_TD2__PWM6_OUT 0x0210 0x0558 0x0000 0x3 0x0 +#define MX6SX_PAD_RGMII2_TD2__GPIO5_IO_20 0x0210 0x0558 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_TD2__CSI2_VSYNC 0x0210 0x0558 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_TD2__SJC_FAIL 0x0210 0x0558 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_TD2__VDEC_DEBUG_26 0x0210 0x0558 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_TD2__PCIE_CTRL_DEBUG_20 0x0210 0x0558 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0x0214 0x055C 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_TD3__SAI1_TX_BCLK 0x0214 0x055C 0x0800 0x2 0x1 +#define MX6SX_PAD_RGMII2_TD3__PWM5_OUT 0x0214 0x055C 0x0000 0x3 0x0 +#define MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21 0x0214 0x055C 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_TD3__CSI2_HSYNC 0x0214 0x055C 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_TD3__SJC_JTAG_ACT 0x0214 0x055C 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_TD3__VDEC_DEBUG_27 0x0214 0x055C 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_TD3__PCIE_CTRL_DEBUG_21 0x0214 0x055C 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x0218 0x0560 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_TX_CTL__SAI1_RX_DATA_0 0x0218 0x0560 0x07F8 0x2 0x1 +#define MX6SX_PAD_RGMII2_TX_CTL__GPIO5_IO_22 0x0218 0x0560 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_TX_CTL__CSI2_FIELD 0x0218 0x0560 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_TX_CTL__SJC_DE_B 0x0218 0x0560 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_TX_CTL__VDEC_DEBUG_28 0x0218 0x0560 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_TX_CTL__PCIE_CTRL_DEBUG_22 0x0218 0x0560 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0x021C 0x0564 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_TXC__ENET2_TX_ER 0x021C 0x0564 0x0000 0x1 0x0 +#define MX6SX_PAD_RGMII2_TXC__SAI1_TX_DATA_0 0x021C 0x0564 0x0000 0x2 0x0 +#define MX6SX_PAD_RGMII2_TXC__GPIO5_IO_23 0x021C 0x0564 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_TXC__CSI2_PIXCLK 0x021C 0x0564 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_TXC__SJC_DONE 0x021C 0x0564 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_TXC__VDEC_DEBUG_29 0x021C 0x0564 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_TXC__PCIE_CTRL_DEBUG_23 0x021C 0x0564 0x0000 0x9 0x0 +#define MX6SX_PAD_SD1_CLK__USDHC1_CLK 0x0220 0x0568 0x0000 0x0 0x0 +#define MX6SX_PAD_SD1_CLK__AUDMUX_AUD5_RXFS 0x0220 0x0568 0x0668 0x1 0x1 +#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_B 0x0220 0x0568 0x0000 0x2 0x0 +#define MX6SX_PAD_SD1_CLK__GPT_CLK 0x0220 0x0568 0x0000 0x3 0x0 +#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_RST_B_DEB 0x0220 0x0568 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_CLK__GPIO6_IO_0 0x0220 0x0568 0x0000 0x5 0x0 +#define MX6SX_PAD_SD1_CLK__ENET2_1588_EVENT1_OUT 0x0220 0x0568 0x0000 0x6 0x0 +#define MX6SX_PAD_SD1_CLK__CCM_OUT1 0x0220 0x0568 0x0000 0x7 0x0 +#define MX6SX_PAD_SD1_CLK__VADC_ADC_PROC_CLK 0x0220 0x0568 0x0000 0x8 0x0 +#define MX6SX_PAD_SD1_CLK__MMDC_DEBUG_45 0x0220 0x0568 0x0000 0x9 0x0 +#define MX6SX_PAD_SD1_CMD__USDHC1_CMD 0x0224 0x056C 0x0000 0x0 0x0 +#define MX6SX_PAD_SD1_CMD__AUDMUX_AUD5_RXC 0x0224 0x056C 0x0664 0x1 0x1 +#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_B 0x0224 0x056C 0x0000 0x2 0x0 +#define MX6SX_PAD_SD1_CMD__GPT_COMPARE1 0x0224 0x056C 0x0000 0x3 0x0 +#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_RST_B_DEB 0x0224 0x056C 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_CMD__GPIO6_IO_1 0x0224 0x056C 0x0000 0x5 0x0 +#define MX6SX_PAD_SD1_CMD__ENET2_1588_EVENT1_IN 0x0224 0x056C 0x0000 0x6 0x0 +#define MX6SX_PAD_SD1_CMD__CCM_CLKO1 0x0224 0x056C 0x0000 0x7 0x0 +#define MX6SX_PAD_SD1_CMD__VADC_EXT_SYSCLK 0x0224 0x056C 0x0000 0x8 0x0 +#define MX6SX_PAD_SD1_CMD__MMDC_DEBUG_46 0x0224 0x056C 0x0000 0x9 0x0 +#define MX6SX_PAD_SD1_DATA0__USDHC1_DATA0 0x0228 0x0570 0x0000 0x0 0x0 +#define MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD 0x0228 0x0570 0x065C 0x1 0x1 +#define MX6SX_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS 0x0228 0x0570 0x0000 0x2 0x0 +#define MX6SX_PAD_SD1_DATA0__GPT_CAPTURE1 0x0228 0x0570 0x0000 0x3 0x0 +#define MX6SX_PAD_SD1_DATA0__UART2_RX 0x0228 0x0570 0x0838 0x4 0x2 +#define MX6SX_PAD_SD1_DATA0__UART2_TX 0x0228 0x0570 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x0228 0x0570 0x0000 0x5 0x0 +#define MX6SX_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN 0x0228 0x0570 0x0000 0x6 0x0 +#define MX6SX_PAD_SD1_DATA0__CCM_OUT2 0x0228 0x0570 0x0000 0x7 0x0 +#define MX6SX_PAD_SD1_DATA0__VADC_CLAMP_UP 0x0228 0x0570 0x0000 0x8 0x0 +#define MX6SX_PAD_SD1_DATA0__MMDC_DEBUG_48 0x0228 0x0570 0x0000 0x9 0x0 +#define MX6SX_PAD_SD1_DATA1__USDHC1_DATA1 0x022C 0x0574 0x0000 0x0 0x0 +#define MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC 0x022C 0x0574 0x066C 0x1 0x1 +#define MX6SX_PAD_SD1_DATA1__PWM4_OUT 0x022C 0x0574 0x0000 0x2 0x0 +#define MX6SX_PAD_SD1_DATA1__GPT_CAPTURE2 0x022C 0x0574 0x0000 0x3 0x0 +#define MX6SX_PAD_SD1_DATA1__UART2_RX 0x022C 0x0574 0x0838 0x4 0x3 +#define MX6SX_PAD_SD1_DATA1__UART2_TX 0x022C 0x0574 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA1__GPIO6_IO_3 0x022C 0x0574 0x0000 0x5 0x0 +#define MX6SX_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT 0x022C 0x0574 0x0000 0x6 0x0 +#define MX6SX_PAD_SD1_DATA1__CCM_CLKO2 0x022C 0x0574 0x0000 0x7 0x0 +#define MX6SX_PAD_SD1_DATA1__VADC_CLAMP_DOWN 0x022C 0x0574 0x0000 0x8 0x0 +#define MX6SX_PAD_SD1_DATA1__MMDC_DEBUG_47 0x022C 0x0574 0x0000 0x9 0x0 +#define MX6SX_PAD_SD1_DATA2__USDHC1_DATA2 0x0230 0x0578 0x0000 0x0 0x0 +#define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x0230 0x0578 0x0670 0x1 0x1 +#define MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x0230 0x0578 0x0000 0x2 0x0 +#define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2 0x0230 0x0578 0x0000 0x3 0x0 +#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0834 0x4 0x2 +#define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4 0x0230 0x0578 0x0000 0x5 0x0 +#define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY 0x0230 0x0578 0x0000 0x6 0x0 +#define MX6SX_PAD_SD1_DATA2__CCM_OUT0 0x0230 0x0578 0x0000 0x7 0x0 +#define MX6SX_PAD_SD1_DATA2__VADC_EXT_PD_N 0x0230 0x0578 0x0000 0x8 0x0 +#define MX6SX_PAD_SD1_DATA3__USDHC1_DATA3 0x0234 0x057C 0x0000 0x0 0x0 +#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD 0x0234 0x057C 0x0660 0x1 0x1 +#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_RXD 0x0234 0x057C 0x065C 0x2 0x2 +#define MX6SX_PAD_SD1_DATA3__GPT_COMPARE3 0x0234 0x057C 0x0000 0x3 0x0 +#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B 0x0234 0x057C 0x0834 0x4 0x3 +#define MX6SX_PAD_SD1_DATA3__GPIO6_IO_5 0x0234 0x057C 0x0000 0x5 0x0 +#define MX6SX_PAD_SD1_DATA3__ECSPI4_SS1 0x0234 0x057C 0x0000 0x6 0x0 +#define MX6SX_PAD_SD1_DATA3__CCM_PMIC_RDY 0x0234 0x057C 0x069C 0x7 0x2 +#define MX6SX_PAD_SD1_DATA3__VADC_RST_N 0x0234 0x057C 0x0000 0x8 0x0 +#define MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x0238 0x0580 0x0000 0x0 0x0 +#define MX6SX_PAD_SD2_CLK__AUDMUX_AUD6_RXFS 0x0238 0x0580 0x0680 0x1 0x2 +#define MX6SX_PAD_SD2_CLK__KPP_COL_5 0x0238 0x0580 0x07C8 0x2 0x1 +#define MX6SX_PAD_SD2_CLK__ECSPI4_SCLK 0x0238 0x0580 0x0740 0x3 0x1 +#define MX6SX_PAD_SD2_CLK__MLB_SIG 0x0238 0x0580 0x07F0 0x4 0x2 +#define MX6SX_PAD_SD2_CLK__GPIO6_IO_6 0x0238 0x0580 0x0000 0x5 0x0 +#define MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x0238 0x0580 0x0000 0x6 0x0 +#define MX6SX_PAD_SD2_CLK__WDOG1_WDOG_ANY 0x0238 0x0580 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_CLK__VADC_CLAMP_CURRENT_5 0x0238 0x0580 0x0000 0x8 0x0 +#define MX6SX_PAD_SD2_CLK__MMDC_DEBUG_29 0x0238 0x0580 0x0000 0x9 0x0 +#define MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x023C 0x0584 0x0000 0x0 0x0 +#define MX6SX_PAD_SD2_CMD__AUDMUX_AUD6_RXC 0x023C 0x0584 0x067C 0x1 0x2 +#define MX6SX_PAD_SD2_CMD__KPP_ROW_5 0x023C 0x0584 0x07D4 0x2 0x1 +#define MX6SX_PAD_SD2_CMD__ECSPI4_MOSI 0x023C 0x0584 0x0748 0x3 0x1 +#define MX6SX_PAD_SD2_CMD__MLB_CLK 0x023C 0x0584 0x07E8 0x4 0x2 +#define MX6SX_PAD_SD2_CMD__GPIO6_IO_7 0x023C 0x0584 0x0000 0x5 0x0 +#define MX6SX_PAD_SD2_CMD__MQS_LEFT 0x023C 0x0584 0x0000 0x6 0x0 +#define MX6SX_PAD_SD2_CMD__WDOG3_WDOG_B 0x023C 0x0584 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_CMD__VADC_CLAMP_CURRENT_4 0x023C 0x0584 0x0000 0x8 0x0 +#define MX6SX_PAD_SD2_CMD__MMDC_DEBUG_30 0x023C 0x0584 0x0000 0x9 0x0 +#define MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x0240 0x0588 0x0000 0x0 0x0 +#define MX6SX_PAD_SD2_DATA0__AUDMUX_AUD6_RXD 0x0240 0x0588 0x0674 0x1 0x2 +#define MX6SX_PAD_SD2_DATA0__KPP_ROW_7 0x0240 0x0588 0x07DC 0x2 0x1 +#define MX6SX_PAD_SD2_DATA0__PWM1_OUT 0x0240 0x0588 0x0000 0x3 0x0 +#define MX6SX_PAD_SD2_DATA0__I2C4_SDA 0x0240 0x0588 0x07C4 0x4 0x3 +#define MX6SX_PAD_SD2_DATA0__GPIO6_IO_8 0x0240 0x0588 0x0000 0x5 0x0 +#define MX6SX_PAD_SD2_DATA0__ECSPI4_SS3 0x0240 0x0588 0x0000 0x6 0x0 +#define MX6SX_PAD_SD2_DATA0__UART4_RX 0x0240 0x0588 0x0848 0x7 0x4 +#define MX6SX_PAD_SD2_DATA0__UART4_TX 0x0240 0x0588 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0 0x0240 0x0588 0x0000 0x8 0x0 +#define MX6SX_PAD_SD2_DATA0__MMDC_DEBUG_50 0x0240 0x0588 0x0000 0x9 0x0 +#define MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x0244 0x058C 0x0000 0x0 0x0 +#define MX6SX_PAD_SD2_DATA1__AUDMUX_AUD6_TXC 0x0244 0x058C 0x0684 0x1 0x2 +#define MX6SX_PAD_SD2_DATA1__KPP_COL_7 0x0244 0x058C 0x07D0 0x2 0x1 +#define MX6SX_PAD_SD2_DATA1__PWM2_OUT 0x0244 0x058C 0x0000 0x3 0x0 +#define MX6SX_PAD_SD2_DATA1__I2C4_SCL 0x0244 0x058C 0x07C0 0x4 0x3 +#define MX6SX_PAD_SD2_DATA1__GPIO6_IO_9 0x0244 0x058C 0x0000 0x5 0x0 +#define MX6SX_PAD_SD2_DATA1__ECSPI4_SS2 0x0244 0x058C 0x0000 0x6 0x0 +#define MX6SX_PAD_SD2_DATA1__UART4_RX 0x0244 0x058C 0x0848 0x7 0x5 +#define MX6SX_PAD_SD2_DATA1__UART4_TX 0x0244 0x058C 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1 0x0244 0x058C 0x0000 0x8 0x0 +#define MX6SX_PAD_SD2_DATA1__MMDC_DEBUG_49 0x0244 0x058C 0x0000 0x9 0x0 +#define MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x0248 0x0590 0x0000 0x0 0x0 +#define MX6SX_PAD_SD2_DATA2__AUDMUX_AUD6_TXFS 0x0248 0x0590 0x0688 0x1 0x2 +#define MX6SX_PAD_SD2_DATA2__KPP_ROW_6 0x0248 0x0590 0x07D8 0x2 0x1 +#define MX6SX_PAD_SD2_DATA2__ECSPI4_SS0 0x0248 0x0590 0x074C 0x3 0x1 +#define MX6SX_PAD_SD2_DATA2__SDMA_EXT_EVENT_0 0x0248 0x0590 0x081C 0x4 0x2 +#define MX6SX_PAD_SD2_DATA2__GPIO6_IO_10 0x0248 0x0590 0x0000 0x5 0x0 +#define MX6SX_PAD_SD2_DATA2__SPDIF_OUT 0x0248 0x0590 0x0000 0x6 0x0 +#define MX6SX_PAD_SD2_DATA2__UART6_RX 0x0248 0x0590 0x0858 0x7 0x4 +#define MX6SX_PAD_SD2_DATA2__UART6_TX 0x0248 0x0590 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2 0x0248 0x0590 0x0000 0x8 0x0 +#define MX6SX_PAD_SD2_DATA2__MMDC_DEBUG_32 0x0248 0x0590 0x0000 0x9 0x0 +#define MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x024C 0x0594 0x0000 0x0 0x0 +#define MX6SX_PAD_SD2_DATA3__AUDMUX_AUD6_TXD 0x024C 0x0594 0x0678 0x1 0x2 +#define MX6SX_PAD_SD2_DATA3__KPP_COL_6 0x024C 0x0594 0x07CC 0x2 0x1 +#define MX6SX_PAD_SD2_DATA3__ECSPI4_MISO 0x024C 0x0594 0x0744 0x3 0x1 +#define MX6SX_PAD_SD2_DATA3__MLB_DATA 0x024C 0x0594 0x07EC 0x4 0x2 +#define MX6SX_PAD_SD2_DATA3__GPIO6_IO_11 0x024C 0x0594 0x0000 0x5 0x0 +#define MX6SX_PAD_SD2_DATA3__SPDIF_IN 0x024C 0x0594 0x0824 0x6 0x4 +#define MX6SX_PAD_SD2_DATA3__UART6_RX 0x024C 0x0594 0x0858 0x7 0x5 +#define MX6SX_PAD_SD2_DATA3__UART6_TX 0x024C 0x0594 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3 0x024C 0x0594 0x0000 0x8 0x0 +#define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31 0x024C 0x0594 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x0250 0x0598 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0844 0x1 0x0 +#define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x0250 0x0598 0x0740 0x2 0x0 +#define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS 0x0250 0x0598 0x0680 0x3 0x0 +#define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC 0x0250 0x0598 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_CLK__GPIO7_IO_0 0x0250 0x0598 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_CLK__LCDIF2_BUSY 0x0250 0x0598 0x07E4 0x6 0x0 +#define MX6SX_PAD_SD3_CLK__TPSMP_HDATA_29 0x0250 0x0598 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5 0x0250 0x0598 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x0254 0x059C 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_CMD__UART4_RX 0x0254 0x059C 0x0848 0x1 0x0 +#define MX6SX_PAD_SD3_CMD__UART4_TX 0x0254 0x059C 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_CMD__ECSPI4_MOSI 0x0254 0x059C 0x0748 0x2 0x0 +#define MX6SX_PAD_SD3_CMD__AUDMUX_AUD6_RXC 0x0254 0x059C 0x067C 0x3 0x0 +#define MX6SX_PAD_SD3_CMD__LCDIF2_HSYNC 0x0254 0x059C 0x07E4 0x4 0x1 +#define MX6SX_PAD_SD3_CMD__GPIO7_IO_1 0x0254 0x059C 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_CMD__LCDIF2_RS 0x0254 0x059C 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_CMD__TPSMP_HDATA_28 0x0254 0x059C 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_CMD__SDMA_DEBUG_EVENT_CHANNEL_4 0x0254 0x059C 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x0258 0x05A0 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_DATA0__I2C4_SCL 0x0258 0x05A0 0x07C0 0x1 0x0 +#define MX6SX_PAD_SD3_DATA0__ECSPI2_SS1 0x0258 0x05A0 0x0000 0x2 0x0 +#define MX6SX_PAD_SD3_DATA0__AUDMUX_AUD6_RXD 0x0258 0x05A0 0x0674 0x3 0x0 +#define MX6SX_PAD_SD3_DATA0__LCDIF2_DATA_1 0x0258 0x05A0 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_DATA0__GPIO7_IO_2 0x0258 0x05A0 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_DATA0__DCIC1_OUT 0x0258 0x05A0 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_DATA0__TPSMP_HDATA_30 0x0258 0x05A0 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_DATA0__GPU_DEBUG_0 0x0258 0x05A0 0x0000 0x8 0x0 +#define MX6SX_PAD_SD3_DATA0__SDMA_DEBUG_EVT_CHN_LINES_0 0x0258 0x05A0 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x025C 0x05A4 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_DATA1__I2C4_SDA 0x025C 0x05A4 0x07C4 0x1 0x0 +#define MX6SX_PAD_SD3_DATA1__ECSPI2_SS2 0x025C 0x05A4 0x0000 0x2 0x0 +#define MX6SX_PAD_SD3_DATA1__AUDMUX_AUD6_TXC 0x025C 0x05A4 0x0684 0x3 0x0 +#define MX6SX_PAD_SD3_DATA1__LCDIF2_DATA_0 0x025C 0x05A4 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_DATA1__GPIO7_IO_3 0x025C 0x05A4 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_DATA1__DCIC2_OUT 0x025C 0x05A4 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_DATA1__TPSMP_HDATA_31 0x025C 0x05A4 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_DATA1__GPU_DEBUG_1 0x025C 0x05A4 0x0000 0x8 0x0 +#define MX6SX_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1 0x025C 0x05A4 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x0260 0x05A8 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B 0x0260 0x05A8 0x0844 0x1 0x1 +#define MX6SX_PAD_SD3_DATA2__ECSPI4_SS0 0x0260 0x05A8 0x074C 0x2 0x0 +#define MX6SX_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS 0x0260 0x05A8 0x0688 0x3 0x0 +#define MX6SX_PAD_SD3_DATA2__LCDIF2_CLK 0x0260 0x05A8 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_DATA2__GPIO7_IO_4 0x0260 0x05A8 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_DATA2__LCDIF2_WR_RWN 0x0260 0x05A8 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_DATA2__TPSMP_HDATA_26 0x0260 0x05A8 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_DATA2__GPU_DEBUG_2 0x0260 0x05A8 0x0000 0x8 0x0 +#define MX6SX_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2 0x0260 0x05A8 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x0264 0x05AC 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_DATA3__UART4_RX 0x0264 0x05AC 0x0848 0x1 0x1 +#define MX6SX_PAD_SD3_DATA3__UART4_TX 0x0264 0x05AC 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_DATA3__ECSPI4_MISO 0x0264 0x05AC 0x0744 0x2 0x0 +#define MX6SX_PAD_SD3_DATA3__AUDMUX_AUD6_TXD 0x0264 0x05AC 0x0678 0x3 0x0 +#define MX6SX_PAD_SD3_DATA3__LCDIF2_ENABLE 0x0264 0x05AC 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_DATA3__GPIO7_IO_5 0x0264 0x05AC 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_DATA3__LCDIF2_RD_E 0x0264 0x05AC 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_DATA3__TPSMP_HDATA_27 0x0264 0x05AC 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_DATA3__GPU_DEBUG_3 0x0264 0x05AC 0x0000 0x8 0x0 +#define MX6SX_PAD_SD3_DATA3__SDMA_DEBUG_EVENT_CHANNEL_3 0x0264 0x05AC 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x0268 0x05B0 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_DATA4__CAN2_RX 0x0268 0x05B0 0x0690 0x1 0x0 +#define MX6SX_PAD_SD3_DATA4__CANFD_RX2 0x0268 0x05B0 0x0698 0x2 0x0 +#define MX6SX_PAD_SD3_DATA4__UART3_RX 0x0268 0x05B0 0x0840 0x3 0x2 +#define MX6SX_PAD_SD3_DATA4__UART3_TX 0x0268 0x05B0 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA4__LCDIF2_DATA_3 0x0268 0x05B0 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_DATA4__GPIO7_IO_6 0x0268 0x05B0 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN 0x0268 0x05B0 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_DATA4__TPSMP_HTRANS_1 0x0268 0x05B0 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_DATA4__GPU_DEBUG_4 0x0268 0x05B0 0x0000 0x8 0x0 +#define MX6SX_PAD_SD3_DATA4__SDMA_DEBUG_BUS_DEVICE_0 0x0268 0x05B0 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x026C 0x05B4 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_DATA5__CAN1_TX 0x026C 0x05B4 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_DATA5__CANFD_TX1 0x026C 0x05B4 0x0000 0x2 0x0 +#define MX6SX_PAD_SD3_DATA5__UART3_RX 0x026C 0x05B4 0x0840 0x3 0x3 +#define MX6SX_PAD_SD3_DATA5__UART3_TX 0x026C 0x05B4 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA5__LCDIF2_DATA_2 0x026C 0x05B4 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_DATA5__GPIO7_IO_7 0x026C 0x05B4 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT 0x026C 0x05B4 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_DATA5__SIM_M_HWRITE 0x026C 0x05B4 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_DATA5__GPU_DEBUG_5 0x026C 0x05B4 0x0000 0x8 0x0 +#define MX6SX_PAD_SD3_DATA5__SDMA_DEBUG_BUS_DEVICE_1 0x026C 0x05B4 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x0270 0x05B8 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_DATA6__CAN2_TX 0x0270 0x05B8 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_DATA6__CANFD_TX2 0x0270 0x05B8 0x0000 0x2 0x0 +#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x0270 0x05B8 0x083C 0x3 0x2 +#define MX6SX_PAD_SD3_DATA6__LCDIF2_DATA_4 0x0270 0x05B8 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_DATA6__GPIO7_IO_8 0x0270 0x05B8 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT 0x0270 0x05B8 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_DATA6__TPSMP_HTRANS_0 0x0270 0x05B8 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_DATA6__GPU_DEBUG_7 0x0270 0x05B8 0x0000 0x8 0x0 +#define MX6SX_PAD_SD3_DATA6__SDMA_DEBUG_EVT_CHN_LINES_7 0x0270 0x05B8 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x0274 0x05BC 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_DATA7__CAN1_RX 0x0274 0x05BC 0x068C 0x1 0x0 +#define MX6SX_PAD_SD3_DATA7__CANFD_RX1 0x0274 0x05BC 0x0694 0x2 0x0 +#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x083C 0x3 0x3 +#define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5 0x0274 0x05BC 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9 0x0274 0x05BC 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN 0x0274 0x05BC 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_DATA7__TPSMP_HDATA_DIR 0x0274 0x05BC 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_DATA7__GPU_DEBUG_6 0x0274 0x05BC 0x0000 0x8 0x0 +#define MX6SX_PAD_SD3_DATA7__SDMA_DEBUG_EVT_CHN_LINES_2 0x0274 0x05BC 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x0278 0x05C0 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_CLK__RAWNAND_DATA15 0x0278 0x05C0 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_CLK__ECSPI2_MISO 0x0278 0x05C0 0x0724 0x2 0x1 +#define MX6SX_PAD_SD4_CLK__AUDMUX_AUD3_RXFS 0x0278 0x05C0 0x0638 0x3 0x0 +#define MX6SX_PAD_SD4_CLK__LCDIF2_DATA_13 0x0278 0x05C0 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_CLK__GPIO6_IO_12 0x0278 0x05C0 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_CLK__ECSPI3_SS2 0x0278 0x05C0 0x0000 0x6 0x0 +#define MX6SX_PAD_SD4_CLK__TPSMP_HDATA_20 0x0278 0x05C0 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_CLK__VDEC_DEBUG_12 0x0278 0x05C0 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_CLK__SDMA_DEBUG_EVENT_CHANNEL_SEL 0x0278 0x05C0 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x027C 0x05C4 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_CMD__RAWNAND_DATA14 0x027C 0x05C4 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_CMD__ECSPI2_MOSI 0x027C 0x05C4 0x0728 0x2 0x1 +#define MX6SX_PAD_SD4_CMD__AUDMUX_AUD3_RXC 0x027C 0x05C4 0x0634 0x3 0x0 +#define MX6SX_PAD_SD4_CMD__LCDIF2_DATA_14 0x027C 0x05C4 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_CMD__GPIO6_IO_13 0x027C 0x05C4 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_CMD__ECSPI3_SS1 0x027C 0x05C4 0x0000 0x6 0x0 +#define MX6SX_PAD_SD4_CMD__TPSMP_HDATA_19 0x027C 0x05C4 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_CMD__VDEC_DEBUG_11 0x027C 0x05C4 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_CMD__SDMA_DEBUG_CORE_RUN 0x027C 0x05C4 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x0280 0x05C8 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_DATA0__RAWNAND_DATA10 0x0280 0x05C8 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_DATA0__ECSPI2_SS0 0x0280 0x05C8 0x072C 0x2 0x1 +#define MX6SX_PAD_SD4_DATA0__AUDMUX_AUD3_RXD 0x0280 0x05C8 0x062C 0x3 0x0 +#define MX6SX_PAD_SD4_DATA0__LCDIF2_DATA_12 0x0280 0x05C8 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_DATA0__GPIO6_IO_14 0x0280 0x05C8 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_DATA0__ECSPI3_SS3 0x0280 0x05C8 0x0000 0x6 0x0 +#define MX6SX_PAD_SD4_DATA0__TPSMP_HDATA_21 0x0280 0x05C8 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_DATA0__VDEC_DEBUG_13 0x0280 0x05C8 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_DATA0__SDMA_DEBUG_MODE 0x0280 0x05C8 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x0284 0x05CC 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_DATA1__RAWNAND_DATA11 0x0284 0x05CC 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_DATA1__ECSPI2_SCLK 0x0284 0x05CC 0x0720 0x2 0x1 +#define MX6SX_PAD_SD4_DATA1__AUDMUX_AUD3_TXC 0x0284 0x05CC 0x063C 0x3 0x0 +#define MX6SX_PAD_SD4_DATA1__LCDIF2_DATA_11 0x0284 0x05CC 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_DATA1__GPIO6_IO_15 0x0284 0x05CC 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_DATA1__ECSPI3_RDY 0x0284 0x05CC 0x0000 0x6 0x0 +#define MX6SX_PAD_SD4_DATA1__TPSMP_HDATA_22 0x0284 0x05CC 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_DATA1__VDEC_DEBUG_14 0x0284 0x05CC 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_DATA1__SDMA_DEBUG_BUS_ERROR 0x0284 0x05CC 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x0288 0x05D0 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_DATA2__RAWNAND_DATA12 0x0288 0x05D0 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_DATA2__I2C2_SDA 0x0288 0x05D0 0x07B4 0x2 0x0 +#define MX6SX_PAD_SD4_DATA2__AUDMUX_AUD3_TXFS 0x0288 0x05D0 0x0640 0x3 0x0 +#define MX6SX_PAD_SD4_DATA2__LCDIF2_DATA_10 0x0288 0x05D0 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_DATA2__GPIO6_IO_16 0x0288 0x05D0 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_DATA2__ECSPI2_SS3 0x0288 0x05D0 0x0000 0x6 0x0 +#define MX6SX_PAD_SD4_DATA2__TPSMP_HDATA_23 0x0288 0x05D0 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_DATA2__VDEC_DEBUG_15 0x0288 0x05D0 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_DATA2__SDMA_DEBUG_BUS_RWB 0x0288 0x05D0 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x028C 0x05D4 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_DATA3__RAWNAND_DATA13 0x028C 0x05D4 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_DATA3__I2C2_SCL 0x028C 0x05D4 0x07B0 0x2 0x0 +#define MX6SX_PAD_SD4_DATA3__AUDMUX_AUD3_TXD 0x028C 0x05D4 0x0630 0x3 0x0 +#define MX6SX_PAD_SD4_DATA3__LCDIF2_DATA_9 0x028C 0x05D4 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_DATA3__GPIO6_IO_17 0x028C 0x05D4 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_DATA3__ECSPI2_RDY 0x028C 0x05D4 0x0000 0x6 0x0 +#define MX6SX_PAD_SD4_DATA3__TPSMP_HDATA_24 0x028C 0x05D4 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_DATA3__VDEC_DEBUG_16 0x028C 0x05D4 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS 0x028C 0x05D4 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x0290 0x05D8 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_DATA4__RAWNAND_DATA09 0x0290 0x05D8 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_DATA4__UART5_RX 0x0290 0x05D8 0x0850 0x2 0x0 +#define MX6SX_PAD_SD4_DATA4__UART5_TX 0x0290 0x05D8 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA4__ECSPI3_SCLK 0x0290 0x05D8 0x0730 0x3 0x0 +#define MX6SX_PAD_SD4_DATA4__LCDIF2_DATA_8 0x0290 0x05D8 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_DATA4__GPIO6_IO_18 0x0290 0x05D8 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_DATA4__SPDIF_OUT 0x0290 0x05D8 0x0000 0x6 0x0 +#define MX6SX_PAD_SD4_DATA4__TPSMP_HDATA_16 0x0290 0x05D8 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_DATA4__USB_OTG_HOST_MODE 0x0290 0x05D8 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE 0x0290 0x05D8 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x0294 0x05DC 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_DATA5__RAWNAND_CE2_B 0x0294 0x05DC 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_DATA5__UART5_RX 0x0294 0x05DC 0x0850 0x2 0x1 +#define MX6SX_PAD_SD4_DATA5__UART5_TX 0x0294 0x05DC 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA5__ECSPI3_MOSI 0x0294 0x05DC 0x0738 0x3 0x0 +#define MX6SX_PAD_SD4_DATA5__LCDIF2_DATA_7 0x0294 0x05DC 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_DATA5__GPIO6_IO_19 0x0294 0x05DC 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_DATA5__SPDIF_IN 0x0294 0x05DC 0x0824 0x6 0x0 +#define MX6SX_PAD_SD4_DATA5__TPSMP_HDATA_17 0x0294 0x05DC 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_DATA5__VDEC_DEBUG_9 0x0294 0x05DC 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0 0x0294 0x05DC 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x0298 0x05E0 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_DATA6__RAWNAND_CE3_B 0x0298 0x05E0 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B 0x0298 0x05E0 0x084C 0x2 0x0 +#define MX6SX_PAD_SD4_DATA6__ECSPI3_MISO 0x0298 0x05E0 0x0734 0x3 0x0 +#define MX6SX_PAD_SD4_DATA6__LCDIF2_DATA_6 0x0298 0x05E0 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x0298 0x05E0 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_DATA6__USDHC4_WP 0x0298 0x05E0 0x0878 0x6 0x0 +#define MX6SX_PAD_SD4_DATA6__TPSMP_HDATA_18 0x0298 0x05E0 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_DATA6__VDEC_DEBUG_10 0x0298 0x05E0 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1 0x0298 0x05E0 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x029C 0x05E4 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08 0x029C 0x05E4 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x084C 0x2 0x1 +#define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0 0x029C 0x05E4 0x073C 0x3 0x0 +#define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15 0x029C 0x05E4 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x029C 0x05E4 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_DATA7__USDHC4_CD_B 0x029C 0x05E4 0x0874 0x6 0x0 +#define MX6SX_PAD_SD4_DATA7__TPSMP_HDATA_15 0x029C 0x05E4 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_DATA7__USB_OTG_PWR_WAKE 0x029C 0x05E4 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_DATA7__SDMA_DEBUG_YIELD 0x029C 0x05E4 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x02A0 0x05E8 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_RESET_B__RAWNAND_DQS 0x02A0 0x05E8 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET 0x02A0 0x05E8 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_RESET_B__AUDMUX_MCLK 0x02A0 0x05E8 0x0000 0x3 0x0 +#define MX6SX_PAD_SD4_RESET_B__LCDIF2_RESET 0x02A0 0x05E8 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22 0x02A0 0x05E8 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_RESET_B__LCDIF2_CS 0x02A0 0x05E8 0x0000 0x6 0x0 +#define MX6SX_PAD_SD4_RESET_B__TPSMP_HDATA_25 0x02A0 0x05E8 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_RESET_B__VDEC_DEBUG_17 0x02A0 0x05E8 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_RESET_B__SDMA_DEBUG_BUS_DEVICE_2 0x02A0 0x05E8 0x0000 0x9 0x0 +#define MX6SX_PAD_USB_H_DATA__USB_H_DATA 0x02A4 0x05EC 0x0000 0x0 0x0 +#define MX6SX_PAD_USB_H_DATA__PWM2_OUT 0x02A4 0x05EC 0x0000 0x1 0x0 +#define MX6SX_PAD_USB_H_DATA__ANATOP_24M_OUT 0x02A4 0x05EC 0x0000 0x2 0x0 +#define MX6SX_PAD_USB_H_DATA__I2C4_SDA 0x02A4 0x05EC 0x07C4 0x3 0x1 +#define MX6SX_PAD_USB_H_DATA__WDOG3_WDOG_B 0x02A4 0x05EC 0x0000 0x4 0x0 +#define MX6SX_PAD_USB_H_DATA__GPIO7_IO_10 0x02A4 0x05EC 0x0000 0x5 0x0 +#define MX6SX_PAD_USB_H_STROBE__USB_H_STROBE 0x02A8 0x05F0 0x0000 0x0 0x0 +#define MX6SX_PAD_USB_H_STROBE__PWM1_OUT 0x02A8 0x05F0 0x0000 0x1 0x0 +#define MX6SX_PAD_USB_H_STROBE__ANATOP_32K_OUT 0x02A8 0x05F0 0x0000 0x2 0x0 +#define MX6SX_PAD_USB_H_STROBE__I2C4_SCL 0x02A8 0x05F0 0x07C0 0x3 0x1 +#define MX6SX_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB 0x02A8 0x05F0 0x0000 0x4 0x0 +#define MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11 0x02A8 0x05F0 0x0000 0x5 0x0 + +#endif /* __DTS_IMX6SX_PINFUNC_H */ diff --git a/dts/src/arm/imx6sx-sdb.dts b/dts/src/arm/imx6sx-sdb.dts new file mode 100644 index 0000000000..a3980d9705 --- /dev/null +++ b/dts/src/arm/imx6sx-sdb.dts @@ -0,0 +1,479 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6sx.dtsi" + +/ { + model = "Freescale i.MX6 SoloX SDB Board"; + compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + volume-up { + label = "Volume Up"; + gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vcc_sd3: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_sd3>; + regulator-name = "VCC_SD3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_psu_5v: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "PSU-5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; + + sound { + compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <6>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6SX_CLK_AUDIO>; + DCVDD-supply = <&vgen4_reg>; + DBVDD-supply = <&vgen4_reg>; + AVDD-supply = <&vgen4_reg>; + CPVDD-supply = <&vgen4_reg>; + MICVDD-supply = <&vgen3_reg>; + PLLVDD-supply = <&vgen4_reg>; + SPKVDD1-supply = <®_psu_5v>; + SPKVDD2-supply = <®_psu_5v>; + }; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart5 { /* for bluetooth */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + enable-sdio-wakeup; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <&vcc_sd3>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + imx6x-sdb { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0 + MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0 + MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0 + MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0 + MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1 + MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1 + MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1 + MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1 + MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1 + MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1 + MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1 + MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1 + MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 + MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 + MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 + MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1 + MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1 + >; + }; + + pinctrl_vcc_sd3: vccsd3grp { + fsl,pins = < + MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 + MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 + MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1 + MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usb_otg2: usbot2ggrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 + MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ + MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 + MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ + MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ + >; + }; + }; +}; diff --git a/dts/src/arm/imx6sx.dtsi b/dts/src/arm/imx6sx.dtsi new file mode 100644 index 0000000000..f4b9da65bc --- /dev/null +++ b/dts/src/arm/imx6sx.dtsi @@ -0,0 +1,1208 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/clock/imx6sx-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "imx6sx-pinfunc.h" +#include "skeleton.dtsi" + +/ { + aliases { + can0 = &flexcan1; + can1 = &flexcan2; + ethernet0 = &fec1; + ethernet1 = &fec2; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + mmc3 = &usdhc4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; + spi4 = &ecspi5; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1075000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC uV */ + 996000 1175000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6SX_CLK_ARM>, + <&clks IMX6SX_CLK_PLL2_PFD2>, + <&clks IMX6SX_CLK_STEP>, + <&clks IMX6SX_CLK_PLL1_SW>, + <&clks IMX6SX_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + soc-supply = <®_soc>; + }; + }; + + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + ipp_di0: clock@2 { + compatible = "fixed-clock"; + reg = <2>; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; + + ipp_di1: clock@3 { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + }; + + ocram: sram@00900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + clocks = <&clks IMX6SX_CLK_OCRAM>; + }; + + L2: l2-cache@00a02000 { + compatible = "arm,pl310-cache"; + reg = <0x00a02000 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <4 2 3>; + arm,data-latency = <4 2 3>; + }; + + dma_apbh: dma-apbh@01804000 { + compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x01804000 0x2000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clks IMX6SX_CLK_APBH_DMA>; + }; + + gpmi: gpmi-nand@01806000{ + compatible = "fsl,imx6sx-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01806000 0x2000>, <0x01808000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bch"; + clocks = <&clks IMX6SX_CLK_GPMI_IO>, + <&clks IMX6SX_CLK_GPMI_APB>, + <&clks IMX6SX_CLK_GPMI_BCH>, + <&clks IMX6SX_CLK_GPMI_BCH_APB>, + <&clks IMX6SX_CLK_PER1_BCH>; + clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", + "gpmi_bch_apb", "per1_bch"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + aips1: aips-bus@02000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba-bus@02000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@02004000 { + compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SX_CLK_SPDIF>, + <&clks IMX6SX_CLK_OSC>, + <&clks IMX6SX_CLK_SPDIF>, + <&clks 0>, <&clks 0>, <&clks 0>, + <&clks IMX6SX_CLK_IPG>, + <&clks 0>, <&clks 0>, + <&clks IMX6SX_CLK_SPBA>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "dma"; + status = "disabled"; + }; + + ecspi1: ecspi@02008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ECSPI1>, + <&clks IMX6SX_CLK_ECSPI1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi@0200c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ECSPI2>, + <&clks IMX6SX_CLK_ECSPI2>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi@02010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ECSPI3>, + <&clks IMX6SX_CLK_ECSPI3>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: ecspi@02014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ECSPI4>, + <&clks IMX6SX_CLK_ECSPI4>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@02020000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + esai: esai@02024000 { + reg = <0x02024000 0x4000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ESAI_IPG>, + <&clks IMX6SX_CLK_ESAI_MEM>, + <&clks IMX6SX_CLK_ESAI_EXTAL>, + <&clks IMX6SX_CLK_ESAI_IPG>, + <&clks IMX6SX_CLK_SPBA>; + clock-names = "core", "mem", "extal", + "fsys", "dma"; + status = "disabled"; + }; + + ssi1: ssi@02028000 { + compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; + reg = <0x02028000 0x4000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_SSI1_IPG>, + <&clks IMX6SX_CLK_SSI1>; + clock-names = "ipg", "baud"; + dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + ssi2: ssi@0202c000 { + compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; + reg = <0x0202c000 0x4000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_SSI2_IPG>, + <&clks IMX6SX_CLK_SSI2>; + clock-names = "ipg", "baud"; + dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + ssi3: ssi@02030000 { + compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; + reg = <0x02030000 0x4000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_SSI3_IPG>, + <&clks IMX6SX_CLK_SSI3>; + clock-names = "ipg", "baud"; + dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + asrc: asrc@02034000 { + reg = <0x02034000 0x4000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ASRC_MEM>, + <&clks IMX6SX_CLK_ASRC_IPG>, + <&clks IMX6SX_CLK_SPDIF>, + <&clks IMX6SX_CLK_SPBA>; + clock-names = "mem", "ipg", "asrck", "dma"; + dmas = <&sdma 17 20 1>, <&sdma 18 20 1>, + <&sdma 19 20 1>, <&sdma 20 20 1>, + <&sdma 21 20 1>, <&sdma 22 20 1>; + dma-names = "rxa", "rxb", "rxc", + "txa", "txb", "txc"; + status = "okay"; + }; + }; + + pwm1: pwm@02080000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PWM1>, + <&clks IMX6SX_CLK_PWM1>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm2: pwm@02084000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PWM2>, + <&clks IMX6SX_CLK_PWM2>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm3: pwm@02088000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PWM3>, + <&clks IMX6SX_CLK_PWM3>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm4: pwm@0208c000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PWM4>, + <&clks IMX6SX_CLK_PWM4>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + flexcan1: can@02090000 { + compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02090000 0x4000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_CAN1_IPG>, + <&clks IMX6SX_CLK_CAN1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + flexcan2: can@02094000 { + compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02094000 0x4000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_CAN2_IPG>, + <&clks IMX6SX_CLK_CAN2_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + gpt: gpt@02098000 { + compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt"; + reg = <0x02098000 0x4000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_GPT_BUS>, + <&clks IMX6SX_CLK_GPT_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@0209c000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@020a0000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@020a4000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@020a8000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@020ac000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@020b0000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020b0000 0x4000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio@020b4000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020b4000 0x4000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + kpp: kpp@020b8000 { + compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp"; + reg = <0x020b8000 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_DUMMY>; + status = "disabled"; + }; + + wdog1: wdog@020bc000 { + compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_DUMMY>; + }; + + wdog2: wdog@020c0000 { + compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_DUMMY>; + status = "disabled"; + }; + + clks: ccm@020c4000 { + compatible = "fsl,imx6sx-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; + + anatop: anatop@020c8000 { + compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x020c8000 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + + regulator-1p1@110 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1375000>; + regulator-always-on; + anatop-reg-offset = <0x110>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <4>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1375000>; + }; + + regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + }; + + regulator-2p5@130 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2875000>; + regulator-always-on; + anatop-reg-offset = <0x130>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2100000>; + anatop-max-voltage = <2875000>; + }; + + reg_arm: regulator-vddcore@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddarm"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_pcie: regulator-vddpcie@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpcie"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <26>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_soc: regulator-vddsoc@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <28>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + }; + + tempmon: tempmon { + compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + }; + + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USBPHY1>; + fsl,anatop = <&anatop>; + }; + + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USBPHY2>; + fsl,anatop = <&anatop>; + }; + + snvs: snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x020cc000 0x4000>; + + snvs-rtc-lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + epit1: epit@020d0000 { + reg = <0x020d0000 0x4000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + }; + + epit2: epit@020d4000 { + reg = <0x020d4000 0x4000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + }; + + src: src@020d8000 { + compatible = "fsl,imx6sx-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + + gpc: gpc@020dc000 { + compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + }; + + iomuxc: iomuxc@020e0000 { + compatible = "fsl,imx6sx-iomuxc"; + reg = <0x020e0000 0x4000>; + }; + + gpr: iomuxc-gpr@020e4000 { + compatible = "fsl,imx6sx-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e4000 0x4000>; + }; + + sdma: sdma@020ec000 { + compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_SDMA>, + <&clks IMX6SX_CLK_SDMA>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + /* imx6sx reuses imx6q sdma firmware */ + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; + }; + }; + + aips2: aips-bus@02100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usbotg1: usb@02184000 { + compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + fsl,anatop = <&anatop>; + status = "disabled"; + }; + + usbotg2: usb@02184200 { + compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + status = "disabled"; + }; + + usbh: usb@02184400 { + compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USBOH3>; + fsl,usbmisc = <&usbmisc 2>; + phy_type = "hsic"; + fsl,anatop = <&anatop>; + status = "disabled"; + }; + + usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + clocks = <&clks IMX6SX_CLK_USBOH3>; + }; + + fec1: ethernet@02188000 { + compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; + reg = <0x02188000 0x4000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ENET>, + <&clks IMX6SX_CLK_ENET_AHB>, + <&clks IMX6SX_CLK_ENET_PTP>, + <&clks IMX6SX_CLK_ENET_REF>, + <&clks IMX6SX_CLK_ENET_PTP>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + status = "disabled"; + }; + + mlb: mlb@0218c000 { + reg = <0x0218c000 0x4000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_MLB>; + status = "disabled"; + }; + + usdhc1: usdhc@02190000 { + compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USDHC1>, + <&clks IMX6SX_CLK_USDHC1>, + <&clks IMX6SX_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: usdhc@02194000 { + compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USDHC2>, + <&clks IMX6SX_CLK_USDHC2>, + <&clks IMX6SX_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: usdhc@02198000 { + compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x02198000 0x4000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USDHC3>, + <&clks IMX6SX_CLK_USDHC3>, + <&clks IMX6SX_CLK_USDHC3>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc4: usdhc@0219c000 { + compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x0219c000 0x4000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USDHC4>, + <&clks IMX6SX_CLK_USDHC4>, + <&clks IMX6SX_CLK_USDHC4>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + i2c1: i2c@021a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@021a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@021a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_I2C3>; + status = "disabled"; + }; + + mmdc: mmdc@021b0000 { + compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + fec2: ethernet@021b4000 { + compatible = "fsl,imx6sx-fec"; + reg = <0x021b4000 0x4000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ENET>, + <&clks IMX6SX_CLK_ENET_AHB>, + <&clks IMX6SX_CLK_ENET_PTP>, + <&clks IMX6SX_CLK_ENET2_REF_125M>, + <&clks IMX6SX_CLK_ENET_PTP>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + status = "disabled"; + }; + + weim: weim@021b8000 { + compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim"; + reg = <0x021b8000 0x4000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_EIM_SLOW>; + }; + + ocotp: ocotp@021bc000 { + compatible = "fsl,imx6sx-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SX_CLK_OCOTP>; + }; + + sai1: sai@021d4000 { + compatible = "fsl,imx6sx-sai"; + reg = <0x021d4000 0x4000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_SAI1_IPG>, + <&clks IMX6SX_CLK_SAI1>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 31 23 0>, <&sdma 32 23 0>; + dma-source = <&gpr 0 15 0 16>; + status = "disabled"; + }; + + audmux: audmux@021d8000 { + compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + status = "disabled"; + }; + + sai2: sai@021dc000 { + compatible = "fsl,imx6sx-sai"; + reg = <0x021dc000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_SAI2_IPG>, + <&clks IMX6SX_CLK_SAI2>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 33 23 0>, <&sdma 34 23 0>; + dma-source = <&gpr 0 17 0 18>; + status = "disabled"; + }; + + qspi1: qspi@021e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-qspi"; + reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_QSPI1>, + <&clks IMX6SX_CLK_QSPI1>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + qspi2: qspi@021e4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-qspi"; + reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_QSPI2>, + <&clks IMX6SX_CLK_QSPI2>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + uart2: serial@021e8000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x021e8000 0x4000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@021ec000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x021ec000 0x4000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart4: serial@021f0000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x021f0000 0x4000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart5: serial@021f4000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x021f4000 0x4000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c4: i2c@021f8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; + reg = <0x021f8000 0x4000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_I2C4>; + status = "disabled"; + }; + }; + + aips3: aips-bus@02200000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02200000 0x100000>; + ranges; + + spba-bus@02200000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02240000 0x40000>; + ranges; + + csi1: csi@02214000 { + reg = <0x02214000 0x4000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, + <&clks IMX6SX_CLK_CSI>, + <&clks IMX6SX_CLK_DCIC1>; + clock-names = "disp-axi", "csi_mclk", "dcic"; + status = "disabled"; + }; + + pxp: pxp@02218000 { + reg = <0x02218000 0x4000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PXP_AXI>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pxp-axi", "disp-axi"; + status = "disabled"; + }; + + csi2: csi@0221c000 { + reg = <0x0221c000 0x4000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, + <&clks IMX6SX_CLK_CSI>, + <&clks IMX6SX_CLK_DCIC2>; + clock-names = "disp-axi", "csi_mclk", "dcic"; + status = "disabled"; + }; + + lcdif1: lcdif@02220000 { + reg = <0x02220000 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + + lcdif2: lcdif@02224000 { + reg = <0x02224000 0x4000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + + vadc: vadc@02228000 { + reg = <0x02228000 0x4000>, <0x0222c000 0x4000>; + reg-names = "vadc-vafe", "vadc-vdec"; + clocks = <&clks IMX6SX_CLK_VADC>, + <&clks IMX6SX_CLK_CSI>; + clock-names = "vadc", "csi"; + status = "disabled"; + }; + }; + + adc1: adc@02280000 { + compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; + reg = <0x02280000 0x4000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_IPG>; + clock-names = "adc"; + status = "disabled"; + }; + + adc2: adc@02284000 { + compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; + reg = <0x02284000 0x4000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_IPG>; + clock-names = "adc"; + status = "disabled"; + }; + + wdog3: wdog@02288000 { + compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; + reg = <0x02288000 0x4000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_DUMMY>; + status = "disabled"; + }; + + ecspi5: ecspi@0228c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x0228c000 0x4000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ECSPI5>, + <&clks IMX6SX_CLK_ECSPI5>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart6: serial@022a0000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x022a0000 0x4000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 0 4 0>, <&sdma 47 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + pwm5: pwm@022a4000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x022a4000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PWM5>, + <&clks IMX6SX_CLK_PWM5>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm6: pwm@022a8000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x022a8000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PWM6>, + <&clks IMX6SX_CLK_PWM6>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm7: pwm@022ac000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x022ac000 0x4000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PWM7>, + <&clks IMX6SX_CLK_PWM7>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm8: pwm@0022b0000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x0022b0000 0x4000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PWM8>, + <&clks IMX6SX_CLK_PWM8>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + }; + + pcie: pcie@0x08000000 { + compatible = "fsl,imx6sx-pcie", "snps,dw-pcie"; + reg = <0x08ffc000 0x4000>; /* DBI */ + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + /* configuration space */ + ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000 + /* downstream I/O */ + 0x81000000 0 0 0x08f80000 0 0x00010000 + /* non-prefetchable memory */ + 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; + num-lanes = <1>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>, + <&clks IMX6SX_CLK_PCIE_AXI>, + <&clks IMX6SX_CLK_LVDS1_OUT>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pcie_ref_125m", "pcie_axi", + "lvds_gate", "display_axi"; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/integratorap.dts b/dts/src/arm/integratorap.dts index b10e6351da..cf06e32ee1 100644 --- a/dts/src/arm/integratorap.dts +++ b/dts/src/arm/integratorap.dts @@ -8,6 +8,7 @@ / { model = "ARM Integrator/AP"; compatible = "arm,integrator-ap"; + dma-ranges = <0x80000000 0x0 0x80000000>; aliases { arm,timer-primary = &timer2; diff --git a/dts/src/arm/k2e-clocks.dtsi b/dts/src/arm/k2e-clocks.dtsi index 90774d604b..598afe91c6 100644 --- a/dts/src/arm/k2e-clocks.dtsi +++ b/dts/src/arm/k2e-clocks.dtsi @@ -22,7 +22,7 @@ clocks { #clock-cells = <0>; compatible = "ti,keystone,pll-clock"; clocks = <&refclkpass>; - clock-output-names = "pa-pll-clk"; + clock-output-names = "papllclk"; reg = <0x02620358 4>; reg-names = "control"; }; diff --git a/dts/src/arm/k2hk-clocks.dtsi b/dts/src/arm/k2hk-clocks.dtsi index 96e65365af..d5adee3c00 100644 --- a/dts/src/arm/k2hk-clocks.dtsi +++ b/dts/src/arm/k2hk-clocks.dtsi @@ -31,7 +31,7 @@ clocks { #clock-cells = <0>; compatible = "ti,keystone,pll-clock"; clocks = <&refclkpass>; - clock-output-names = "pa-pll-clk"; + clock-output-names = "papllclk"; reg = <0x02620358 4>; reg-names = "control"; }; diff --git a/dts/src/arm/k2hk-evm.dts b/dts/src/arm/k2hk-evm.dts index 1f90cbf27f..3223cc152a 100644 --- a/dts/src/arm/k2hk-evm.dts +++ b/dts/src/arm/k2hk-evm.dts @@ -167,3 +167,15 @@ }; }; }; + +&mdio { + ethphy0: ethernet-phy@0 { + compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; diff --git a/dts/src/arm/k2l-clocks.dtsi b/dts/src/arm/k2l-clocks.dtsi index f584b80200..eb1e3e29f0 100644 --- a/dts/src/arm/k2l-clocks.dtsi +++ b/dts/src/arm/k2l-clocks.dtsi @@ -31,7 +31,7 @@ clocks { #clock-cells = <0>; compatible = "ti,keystone,pll-clock"; clocks = <&refclksys>; - clock-output-names = "pa-pll-clk"; + clock-output-names = "papllclk"; reg = <0x02620358 4>; reg-names = "control"; }; diff --git a/dts/src/arm/keystone-clocks.dtsi b/dts/src/arm/keystone-clocks.dtsi index 93f82c7010..0c334b2578 100644 --- a/dts/src/arm/keystone-clocks.dtsi +++ b/dts/src/arm/keystone-clocks.dtsi @@ -215,7 +215,7 @@ clocks { clkpa: clkpa { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; - clocks = <&chipclk16>; + clocks = <&paclk13>; clock-output-names = "pa"; reg = <0x0235001c 0xb00>, <0x02350008 0x400>; reg-names = "control", "domain"; diff --git a/dts/src/arm/keystone.dtsi b/dts/src/arm/keystone.dtsi index c1414cb81f..9e31fe7d31 100644 --- a/dts/src/arm/keystone.dtsi +++ b/dts/src/arm/keystone.dtsi @@ -266,5 +266,16 @@ ranges = <0 0 0x30000000 0x10000000 1 0 0x21000A00 0x00000100>; }; + + mdio: mdio@02090300 { + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02090300 0x100>; + status = "disabled"; + clocks = <&clkpa>; + clock-names = "fck"; + bus_freq = <2500000>; + }; }; }; diff --git a/dts/src/arm/kirkwood-d2net.dts b/dts/src/arm/kirkwood-d2net.dts new file mode 100644 index 0000000000..6b78560250 --- /dev/null +++ b/dts/src/arm/kirkwood-d2net.dts @@ -0,0 +1,42 @@ +/* + * Device Tree file for d2 Network v2 + * + * Copyright (C) 2014 Simon Guinot <simon.guinot@sequanux.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +/dts-v1/; + +#include "kirkwood-netxbig.dtsi" + +/ { + model = "LaCie d2 Network v2"; + compatible = "lacie,d2net_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "d2net_v2:blue:sata"; + slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-fail { + label = "d2net_v2:red:fail"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/dts/src/arm/kirkwood-net2big.dts b/dts/src/arm/kirkwood-net2big.dts new file mode 100644 index 0000000000..53dc37a3b6 --- /dev/null +++ b/dts/src/arm/kirkwood-net2big.dts @@ -0,0 +1,60 @@ +/* + * Device Tree file for LaCie 2Big Network v2 + * + * Copyright (C) 2014 + * + * Andrew Lunn <andrew@lunn.ch> + * + * Based on netxbig_v2-setup.c, + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include "kirkwood-netxbig.dtsi" + +/ { + model = "LaCie 2Big Network v2"; + compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; +}; + +®ulators { + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "hdd1power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; + }; + + clocks { + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; + +&i2c0 { + g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; + }; +}; diff --git a/dts/src/arm/kirkwood-net5big.dts b/dts/src/arm/kirkwood-net5big.dts new file mode 100644 index 0000000000..36155b749d --- /dev/null +++ b/dts/src/arm/kirkwood-net5big.dts @@ -0,0 +1,111 @@ +/* + * Device Tree file for LaCie 5Big Network v2 + * + * Copyright (C) 2014 + * + * Andrew Lunn <andrew@lunn.ch> + * + * Based on netxbig_v2-setup.c, + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include "kirkwood-netxbig.dtsi" + +/ { + model = "LaCie 5Big Network v2"; + compatible = "lacie,net5big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + +}; + +®ulators { + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "hdd1power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; + }; + + regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "hdd2power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + + regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "hdd3power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + + regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "hdd4power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + clocks { + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; + +&mdio { + ethphy1: ethernet-phy@1 { + reg = <0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; + + +&i2c0 { + g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; + }; +}; diff --git a/dts/src/arm/kirkwood-netxbig.dtsi b/dts/src/arm/kirkwood-netxbig.dtsi new file mode 100644 index 0000000000..b0cfb7cd30 --- /dev/null +++ b/dts/src/arm/kirkwood-netxbig.dtsi @@ -0,0 +1,154 @@ +/* + * Device Tree common file for LaCie 2Big and 5Big Network v2 + * + * Copyright (C) 2014 + * + * Andrew Lunn <andrew@lunn.ch> + * + * Based on netxbig_v2-setup.c, + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + ocp@f1000000 { + serial@12000 { + status = "okay"; + }; + + spi@10600 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25l4005a"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + /* + * button@1 and button@2 represent a three position rocker + * switch. Thus the conventional KEY_POWER does not fit + */ + button@1 { + label = "Back power switch (on|auto)"; + linux,code = <KEY_ESC>; + linux,input-type = <5>; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + button@2 { + label = "Back power switch (auto|off)"; + linux,code = <KEY_1>; + linux,input-type = <5>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + button@3 { + label = "Function button"; + linux,code = <KEY_OPTION>; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; + + regulators: regulators { + status = "okay"; + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "hdd0power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <8>; + }; + + ethphy1: ethernet-phy@1 { + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + + pmx_button_function: pmx-button-function { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_button_power_off: pmx-button-power-off { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + pmx_button_power_on: pmx-button-power-on { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x50>; + }; +}; diff --git a/dts/src/arm/kizbox.dts b/dts/src/arm/kizbox.dts index 928f6eef2d..e83e4f9310 100644 --- a/dts/src/arm/kizbox.dts +++ b/dts/src/arm/kizbox.dts @@ -30,6 +30,10 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <18432000>; }; + + main_xtal { + clock-frequency = <18432000>; + }; }; ahb { diff --git a/dts/src/arm/mpa1600.dts b/dts/src/arm/mpa1600.dts index ccf9ea242f..f0f5e10989 100644 --- a/dts/src/arm/mpa1600.dts +++ b/dts/src/arm/mpa1600.dts @@ -25,6 +25,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <18432000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; }; ahb { diff --git a/dts/src/arm/mt6589-aquaris5.dts b/dts/src/arm/mt6589-aquaris5.dts new file mode 100644 index 0000000000..443b4467de --- /dev/null +++ b/dts/src/arm/mt6589-aquaris5.dts @@ -0,0 +1,25 @@ +/* + * Copyright (c) 2014 MundoReader S.L. + * Author: Matthias Brugger <matthias.bgg@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt6589.dtsi" + +/ { + model = "bq Aquaris5"; + + memory { + reg = <0x80000000 0x40000000>; + }; +}; diff --git a/dts/src/arm/mt6589.dtsi b/dts/src/arm/mt6589.dtsi new file mode 100644 index 0000000000..d0297a0515 --- /dev/null +++ b/dts/src/arm/mt6589.dtsi @@ -0,0 +1,94 @@ +/* + * Copyright (c) 2014 MundoReader S.L. + * Author: Matthias Brugger <matthias.bgg@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton.dtsi" + +/ { + compatible = "mediatek,mt6589"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + }; + + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + system_clk: dummy13m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + rtc_clk: dummy32k { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + timer: timer@10008000 { + compatible = "mediatek,mt6577-timer"; + reg = <0x10008000 0x80>; + interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>; + clocks = <&system_clk>, <&rtc_clk>; + clock-names = "system-clk", "rtc-clk"; + }; + + gic: interrupt-controller@10212000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x10211000 0x1000>, + <0x10212000 0x1000>, + <0x10214000 0x2000>, + <0x10216000 0x2000>; + }; + }; +}; diff --git a/dts/src/arm/omap2420.dtsi b/dts/src/arm/omap2420.dtsi index e83b046808..9be3c12663 100644 --- a/dts/src/arm/omap2420.dtsi +++ b/dts/src/arm/omap2420.dtsi @@ -157,6 +157,8 @@ interrupts = <26>, <34>; interrupt-names = "dsp", "iva"; ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <6>; }; timer1: timer@48028000 { @@ -182,3 +184,6 @@ &i2c2 { compatible = "ti,omap2420-i2c"; }; + +/include/ "omap24xx-clocks.dtsi" +/include/ "omap2420-clocks.dtsi" diff --git a/dts/src/arm/omap2430.dtsi b/dts/src/arm/omap2430.dtsi index c4e8013801..1a00f15d90 100644 --- a/dts/src/arm/omap2430.dtsi +++ b/dts/src/arm/omap2430.dtsi @@ -247,6 +247,8 @@ reg = <0x48094000 0x200>; interrupts = <26>; ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <6>; }; timer1: timer@49018000 { @@ -288,3 +290,6 @@ &i2c2 { compatible = "ti,omap2430-i2c"; }; + +/include/ "omap24xx-clocks.dtsi" +/include/ "omap2430-clocks.dtsi" diff --git a/dts/src/arm/omap3.dtsi b/dts/src/arm/omap3.dtsi index b2891a9a69..575a49bf96 100644 --- a/dts/src/arm/omap3.dtsi +++ b/dts/src/arm/omap3.dtsi @@ -332,6 +332,8 @@ ti,hwmods = "mailbox"; reg = <0x48094000 0x200>; interrupts = <26>; + ti,mbox-num-users = <2>; + ti,mbox-num-fifos = <2>; }; mcspi1: spi@48098000 { diff --git a/dts/src/arm/omap4.dtsi b/dts/src/arm/omap4.dtsi index 7e26d222bf..69408b5320 100644 --- a/dts/src/arm/omap4.dtsi +++ b/dts/src/arm/omap4.dtsi @@ -649,6 +649,15 @@ }; }; + mailbox: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox"; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + }; + timer1: timer@4a318000 { compatible = "ti,omap3430-timer"; reg = <0x4a318000 0x80>; diff --git a/dts/src/arm/omap5-uevm.dts b/dts/src/arm/omap5-uevm.dts index 1e1b05768c..159720d6c9 100644 --- a/dts/src/arm/omap5-uevm.dts +++ b/dts/src/arm/omap5-uevm.dts @@ -100,15 +100,33 @@ }; }; }; + + sound: sound { + compatible = "ti,abe-twl6040"; + ti,model = "omap5-uevm"; + + ti,mclk-freq = <19200000>; + + ti,mcpdm = <&mcpdm>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "AFML", "Line In", + "AFMR", "Line In"; + }; }; &omap5_pmx_core { pinctrl-names = "default"; pinctrl-0 = < - &twl6040_pins - &mcpdm_pins - &mcbsp1_pins - &mcbsp2_pins &usbhost_pins &led_gpio_pins >; @@ -306,6 +324,11 @@ ti,wakeup; }; + clk32kgaudio: palmas_clk32k@1 { + compatible = "ti,palmas-clk32kgaudio"; + #clock-cells = <0>; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; @@ -489,6 +512,25 @@ }; }; }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + + pinctrl-names = "default"; + pinctrl-0 = <&twl6040_pins>; + + interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */ + + vio-supply = <&smps7_reg>; + v2v1-supply = <&smps9_reg>; + enable-active-high; + + clocks = <&clk32kgaudio>; + clock-names = "clk32k"; + }; }; &i2c5 { @@ -505,8 +547,22 @@ }; }; -&mcbsp3 { - status = "disabled"; +&mcpdm { + pinctrl-names = "default"; + pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; + +&mcbsp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; + status = "okay"; +}; + +&mcbsp2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; + status = "okay"; }; &usbhshost { diff --git a/dts/src/arm/omap5.dtsi b/dts/src/arm/omap5.dtsi index a4ed549888..fc8df1739f 100644 --- a/dts/src/arm/omap5.dtsi +++ b/dts/src/arm/omap5.dtsi @@ -640,6 +640,8 @@ reg = <0x4a0f4000 0x200>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mailbox"; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; }; timer1: timer@4ae18000 { @@ -985,6 +987,66 @@ dma-names = "audio_tx"; }; }; + + abb_mpu: regulator-abb-mpu { + compatible = "ti,abb-v2"; + regulator-name = "abb_mpu"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>, + <0x4a0021c4 0x8>, <0x4ae0c318 0x4>; + reg-names = "base-address", "int-address", + "efuse-address", "ldo-address"; + ti,tranxdone-status-mask = <0x80>; + /* LDOVBBMPU_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMPU_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1060000 0 0x0 0 0x02000000 0x01F00000 + 1250000 0 0x4 0 0x02000000 0x01F00000 + >; + }; + + abb_mm: regulator-abb-mm { + compatible = "ti,abb-v2"; + regulator-name = "abb_mm"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>, + <0x4a0021a4 0x8>, <0x4ae0c314 0x4>; + reg-names = "base-address", "int-address", + "efuse-address", "ldo-address"; + ti,tranxdone-status-mask = <0x80000000>; + /* LDOVBBMM_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMM_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1025000 0 0x0 0 0x02000000 0x01F00000 + 1120000 0 0x4 0 0x02000000 0x01F00000 + >; + }; }; }; diff --git a/dts/src/arm/pm9g45.dts b/dts/src/arm/pm9g45.dts index 33ffabe9c4..66afcff67f 100644 --- a/dts/src/arm/pm9g45.dts +++ b/dts/src/arm/pm9g45.dts @@ -29,6 +29,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/dts/src/arm/r7s72100-genmai.dts b/dts/src/arm/r7s72100-genmai.dts index 56849b55e1..20705467f4 100644 --- a/dts/src/arm/r7s72100-genmai.dts +++ b/dts/src/arm/r7s72100-genmai.dts @@ -57,3 +57,13 @@ &scif2 { status = "okay"; }; + +&spi4 { + status = "okay"; + + codec: codec@0 { + compatible = "wlf,wm8978"; + reg = <0>; + spi-max-frequency = <5000000>; + }; +}; diff --git a/dts/src/arm/r7s72100.dtsi b/dts/src/arm/r7s72100.dtsi index f50fbc8f3b..bdee225411 100644 --- a/dts/src/arm/r7s72100.dtsi +++ b/dts/src/arm/r7s72100.dtsi @@ -144,6 +144,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clock-frequency = <400000000>; }; }; diff --git a/dts/src/arm/r8a73a4-ape6evm-reference.dts b/dts/src/arm/r8a73a4-ape6evm-reference.dts index 70b1fff8f4..a860f32bca 100644 --- a/dts/src/arm/r8a73a4-ape6evm-reference.dts +++ b/dts/src/arm/r8a73a4-ape6evm-reference.dts @@ -16,6 +16,10 @@ model = "APE6EVM"; compatible = "renesas,ape6evm-reference", "renesas,r8a73a4"; + aliases { + serial0 = &scifa0; + }; + chosen { bootargs = "console=ttySC0,115200 ignore_loglevel rw"; }; @@ -90,9 +94,6 @@ }; &pfc { - pinctrl-0 = <&scifa0_pins>; - pinctrl-names = "default"; - scifa0_pins: serial0 { renesas,groups = "scifa0_data"; renesas,function = "scifa0"; @@ -123,6 +124,13 @@ status = "okay"; }; +&scifa0 { + pinctrl-0 = <&scifa0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &sdhi0 { vmmc-supply = <&vcc_sdhi0>; bus-width = <4>; diff --git a/dts/src/arm/r8a73a4.dtsi b/dts/src/arm/r8a73a4.dtsi index 82c5ac8253..d8ec5058c3 100644 --- a/dts/src/arm/r8a73a4.dtsi +++ b/dts/src/arm/r8a73a4.dtsi @@ -252,6 +252,48 @@ status = "disabled"; }; + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; + reg = <0 0xe6c40000 0 0x100>; + interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; + reg = <0 0xe6c50000 0 0x100>; + interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifb2: serial@e6c20000 { + compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; + reg = <0 0xe6c20000 0 0x100>; + interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifb3: serial@e6c30000 { + compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; + reg = <0 0xe6c30000 0 0x100>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifb4: serial@e6ce0000 { + compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; + reg = <0 0xe6ce0000 0 0x100>; + interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifb5: serial@e6cf0000 { + compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; + reg = <0 0xe6cf0000 0 0x100>; + interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + mmcif0: mmc@ee200000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; diff --git a/dts/src/arm/r8a7740-armadillo800eva-reference.dts b/dts/src/arm/r8a7740-armadillo800eva-reference.dts index 486007d7ff..ee9e7d5c97 100644 --- a/dts/src/arm/r8a7740-armadillo800eva-reference.dts +++ b/dts/src/arm/r8a7740-armadillo800eva-reference.dts @@ -19,8 +19,12 @@ model = "armadillo 800 eva reference"; compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740"; + aliases { + serial1 = &scifa1; + }; + chosen { - bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; + bootargs = "console=tty0 console=ttySC1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; }; memory { @@ -104,17 +108,21 @@ leds { compatible = "gpio-leds"; - led1 { + led3 { gpios = <&pfc 102 GPIO_ACTIVE_HIGH>; + label = "LED3"; }; - led2 { + led4 { gpios = <&pfc 111 GPIO_ACTIVE_HIGH>; + label = "LED4"; }; - led3 { + led5 { gpios = <&pfc 110 GPIO_ACTIVE_HIGH>; + label = "LED5"; }; - led4 { + led6 { gpios = <&pfc 177 GPIO_ACTIVE_HIGH>; + label = "LED6"; }; }; @@ -198,9 +206,6 @@ }; &pfc { - pinctrl-0 = <&scifa1_pins>; - pinctrl-names = "default"; - ether_pins: ether { renesas,groups = "gether_mii", "gether_int"; renesas,function = "gether"; @@ -252,6 +257,13 @@ status = "okay"; }; +&scifa1 { + pinctrl-0 = <&scifa1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm/r8a7740.dtsi b/dts/src/arm/r8a7740.dtsi index 55d29f4d2e..bda18fb3d9 100644 --- a/dts/src/arm/r8a7740.dtsi +++ b/dts/src/arm/r8a7740.dtsi @@ -156,6 +156,69 @@ status = "disabled"; }; + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7740", "renesas,scifa"; + reg = <0xe6c40000 0x100>; + interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7740", "renesas,scifa"; + reg = <0xe6c50000 0x100>; + interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7740", "renesas,scifa"; + reg = <0xe6c60000 0x100>; + interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-r8a7740", "renesas,scifa"; + reg = <0xe6c70000 0x100>; + interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa4: serial@e6c80000 { + compatible = "renesas,scifa-r8a7740", "renesas,scifa"; + reg = <0xe6c80000 0x100>; + interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa5: serial@e6cb0000 { + compatible = "renesas,scifa-r8a7740", "renesas,scifa"; + reg = <0xe6cb0000 0x100>; + interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa6: serial@e6cc0000 { + compatible = "renesas,scifa-r8a7740", "renesas,scifa"; + reg = <0xe6cc0000 0x100>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa7: serial@e6cd0000 { + compatible = "renesas,scifa-r8a7740", "renesas,scifa"; + reg = <0xe6cd0000 0x100>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifb8: serial@e6c30000 { + compatible = "renesas,scifb-r8a7740", "renesas,scifb"; + reg = <0xe6c30000 0x100>; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + pfc: pfc@e6050000 { compatible = "renesas,pfc-r8a7740"; reg = <0xe6050000 0x8000>, diff --git a/dts/src/arm/r8a7778-bockw-reference.dts b/dts/src/arm/r8a7778-bockw-reference.dts index f76f6ec01e..3342c74c5d 100644 --- a/dts/src/arm/r8a7778-bockw-reference.dts +++ b/dts/src/arm/r8a7778-bockw-reference.dts @@ -23,6 +23,10 @@ model = "bockw"; compatible = "renesas,bockw-reference", "renesas,r8a7778"; + aliases { + serial0 = &scif0; + }; + chosen { bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; }; @@ -70,9 +74,6 @@ }; &pfc { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - scif0_pins: serial0 { renesas,groups = "scif0_data_a", "scif0_ctrl"; renesas,function = "scif0"; @@ -124,3 +125,10 @@ }; }; }; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/dts/src/arm/r8a7778.dtsi b/dts/src/arm/r8a7778.dtsi index 3af0a21874..ecfdf4b01b 100644 --- a/dts/src/arm/r8a7778.dtsi +++ b/dts/src/arm/r8a7778.dtsi @@ -156,6 +156,48 @@ status = "disabled"; }; + scif0: serial@ffe40000 { + compatible = "renesas,scif-r8a7778", "renesas,scif"; + reg = <0xffe40000 0x100>; + interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scif1: serial@ffe41000 { + compatible = "renesas,scif-r8a7778", "renesas,scif"; + reg = <0xffe41000 0x100>; + interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scif2: serial@ffe42000 { + compatible = "renesas,scif-r8a7778", "renesas,scif"; + reg = <0xffe42000 0x100>; + interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scif3: serial@ffe43000 { + compatible = "renesas,scif-r8a7778", "renesas,scif"; + reg = <0xffe43000 0x100>; + interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scif4: serial@ffe44000 { + compatible = "renesas,scif-r8a7778", "renesas,scif"; + reg = <0xffe44000 0x100>; + interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scif5: serial@ffe45000 { + compatible = "renesas,scif-r8a7778", "renesas,scif"; + reg = <0xffe45000 0x100>; + interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + mmcif: mmc@ffe4e000 { compatible = "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; diff --git a/dts/src/arm/r8a7779-marzen-reference.dts b/dts/src/arm/r8a7779-marzen-reference.dts deleted file mode 100644 index b27c6373ff..0000000000 --- a/dts/src/arm/r8a7779-marzen-reference.dts +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Reference Device Tree Source for the Marzen board - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "r8a7779.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "marzen"; - compatible = "renesas,marzen-reference", "renesas,r8a7779"; - - chosen { - bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on rw"; - }; - - memory { - device_type = "memory"; - reg = <0x60000000 0x40000000>; - }; - - fixedregulator3v3: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - lan0@18000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x18000000 0x100>; - pinctrl-0 = <&lan0_pins>; - pinctrl-names = "default"; - - phy-mode = "mii"; - interrupt-parent = <&irqpin0>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - smsc,irq-push-pull; - reg-io-width = <4>; - vddvario-supply = <&fixedregulator3v3>; - vdd33a-supply = <&fixedregulator3v3>; - }; - - leds { - compatible = "gpio-leds"; - led2 { - gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; - }; - led3 { - gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; - }; - led4 { - gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&irqpin0 { - status = "okay"; -}; - -&pfc { - pinctrl-0 = <&scif2_pins &scif4_pins>; - pinctrl-names = "default"; - - lan0_pins: lan0 { - intc { - renesas,groups = "intc_irq1_b"; - renesas,function = "intc"; - }; - lbsc { - renesas,groups = "lbsc_ex_cs0"; - renesas,function = "lbsc"; - }; - }; - - scif2_pins: serial2 { - renesas,groups = "scif2_data_c"; - renesas,function = "scif2"; - }; - - scif4_pins: serial4 { - renesas,groups = "scif4_data"; - renesas,function = "scif4"; - }; - - sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; - renesas,function = "sdhi0"; - }; - - hspi0_pins: hspi0 { - renesas,groups = "hspi0"; - renesas,function = "hspi0"; - }; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&fixedregulator3v3>; - bus-width = <4>; - status = "okay"; -}; - -&hspi0 { - pinctrl-0 = <&hspi0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; diff --git a/dts/src/arm/r8a7779-marzen.dts b/dts/src/arm/r8a7779-marzen.dts index a7af2c2371..5745555df9 100644 --- a/dts/src/arm/r8a7779-marzen.dts +++ b/dts/src/arm/r8a7779-marzen.dts @@ -11,17 +11,131 @@ /dts-v1/; #include "r8a7779.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "marzen"; compatible = "renesas,marzen", "renesas,r8a7779"; + aliases { + serial2 = &scif2; + serial4 = &scif4; + }; + chosen { - bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on"; + bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on"; }; memory { device_type = "memory"; reg = <0x60000000 0x40000000>; }; + + fixedregulator3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + lan0@18000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x18000000 0x100>; + pinctrl-0 = <&lan0_pins>; + pinctrl-names = "default"; + + phy-mode = "mii"; + interrupt-parent = <&irqpin0>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; + reg-io-width = <4>; + vddvario-supply = <&fixedregulator3v3>; + vdd33a-supply = <&fixedregulator3v3>; + }; + + leds { + compatible = "gpio-leds"; + led2 { + gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; + }; + led3 { + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; + }; + led4 { + gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&irqpin0 { + status = "okay"; +}; + +&extal_clk { + clock-frequency = <31250000>; +}; + +&pfc { + lan0_pins: lan0 { + intc { + renesas,groups = "intc_irq1_b"; + renesas,function = "intc"; + }; + lbsc { + renesas,groups = "lbsc_ex_cs0"; + renesas,function = "lbsc"; + }; + }; + + scif2_pins: serial2 { + renesas,groups = "scif2_data_c"; + renesas,function = "scif2"; + }; + + scif4_pins: serial4 { + renesas,groups = "scif4_data"; + renesas,function = "scif4"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; + renesas,function = "sdhi0"; + }; + + hspi0_pins: hspi0 { + renesas,groups = "hspi0"; + renesas,function = "hspi0"; + }; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif4 { + pinctrl-0 = <&scif4_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&fixedregulator3v3>; + bus-width = <4>; + status = "okay"; +}; + +&hspi0 { + pinctrl-0 = <&hspi0_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/dts/src/arm/r8a7779.dtsi b/dts/src/arm/r8a7779.dtsi index b517c8e6b4..58d0d952d6 100644 --- a/dts/src/arm/r8a7779.dtsi +++ b/dts/src/arm/r8a7779.dtsi @@ -11,6 +11,7 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/clock/r8a7779-clock.h> #include <dt-bindings/interrupt-controller/irq.h> / { @@ -25,21 +26,25 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clock-frequency = <1000000000>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clock-frequency = <1000000000>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; + clock-frequency = <1000000000>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; + clock-frequency = <1000000000>; }; }; @@ -49,13 +54,13 @@ spi2 = &hspi2; }; - gic: interrupt-controller@f0001000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0xf0001000 0x1000>, - <0xf0000100 0x100>; - }; + gic: interrupt-controller@f0001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xf0001000 0x1000>, + <0xf0000100 0x100>; + }; gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; @@ -157,6 +162,7 @@ compatible = "renesas,i2c-r8a7779"; reg = <0xffc70000 0x1000>; interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_I2C0>; status = "disabled"; }; @@ -166,6 +172,7 @@ compatible = "renesas,i2c-r8a7779"; reg = <0xffc71000 0x1000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_I2C1>; status = "disabled"; }; @@ -175,6 +182,7 @@ compatible = "renesas,i2c-r8a7779"; reg = <0xffc72000 0x1000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_I2C2>; status = "disabled"; }; @@ -184,6 +192,67 @@ compatible = "renesas,i2c-r8a7779"; reg = <0xffc73000 0x1000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_I2C3>; + status = "disabled"; + }; + + scif0: serial@ffe40000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe40000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif1: serial@ffe41000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe41000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif2: serial@ffe42000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe42000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif3: serial@ffe43000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe43000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif4: serial@ffe44000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe44000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif5: serial@ffe45000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe45000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -201,12 +270,14 @@ compatible = "renesas,rcar-sata"; reg = <0xfc600000 0x2000>; interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7779_CLK_SATA>; }; sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4c000 0x100>; interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7779_CLK_SDHI0>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -216,6 +287,7 @@ compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4d000 0x100>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7779_CLK_SDHI1>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -225,6 +297,7 @@ compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4e000 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7779_CLK_SDHI2>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -234,6 +307,7 @@ compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4f000 0x100>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7779_CLK_SDHI3>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -245,6 +319,7 @@ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&mstp0_clks R8A7779_CLK_HSPI>; status = "disabled"; }; @@ -254,6 +329,7 @@ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&mstp0_clks R8A7779_CLK_HSPI>; status = "disabled"; }; @@ -263,6 +339,150 @@ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&mstp0_clks R8A7779_CLK_HSPI>; status = "disabled"; }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* External root clock */ + extal_clk: extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overriden by the board. */ + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + /* Special CPG clocks */ + cpg_clocks: clocks@ffc80000 { + compatible = "renesas,r8a7779-cpg-clocks"; + reg = <0xffc80000 0x30>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "plla", "z", "zs", "s", + "s1", "p", "b", "out"; + }; + + /* Fixed factor clocks */ + i_clk: i_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "i"; + }; + s3_clk: s3_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "s3"; + }; + s4_clk: s4_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <16>; + clock-mult = <1>; + clock-output-names = "s4"; + }; + g_clk: g_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <24>; + clock-mult = <1>; + clock-output-names = "g"; + }; + + /* Gate clocks */ + mstp0_clks: clocks@ffc80030 { + compatible = "renesas,r8a7779-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xffc80030 4>; + clocks = <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7779_CLK_HSPI R8A7779_CLK_TMU2 + R8A7779_CLK_TMU1 R8A7779_CLK_TMU0 + R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0 + R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4 + R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2 + R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0 + R8A7779_CLK_I2C3 R8A7779_CLK_I2C2 + R8A7779_CLK_I2C1 R8A7779_CLK_I2C0 + >; + clock-output-names = + "hspi", "tmu2", "tmu1", "tmu0", "hscif1", + "hscif0", "scif5", "scif4", "scif3", "scif2", + "scif1", "scif0", "i2c3", "i2c2", "i2c1", + "i2c0"; + }; + mstp1_clks: clocks@ffc80034 { + compatible = "renesas,r8a7779-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xffc80034 4>, <0xffc80044 4>; + clocks = <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7779_CLK_USB01 R8A7779_CLK_USB2 + R8A7779_CLK_DU R8A7779_CLK_VIN2 + R8A7779_CLK_VIN1 R8A7779_CLK_VIN0 + R8A7779_CLK_ETHER R8A7779_CLK_SATA + R8A7779_CLK_PCIE R8A7779_CLK_VIN3 + >; + clock-output-names = + "usb01", "usb2", + "du", "vin2", + "vin1", "vin0", + "ether", "sata", + "pcie", "vin3"; + }; + mstp3_clks: clocks@ffc8003c { + compatible = "renesas,r8a7779-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xffc8003c 4>; + clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, + <&s4_clk>, <&s4_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2 + R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0 + R8A7779_CLK_MMC1 R8A7779_CLK_MMC0 + >; + clock-output-names = + "sdhi3", "sdhi2", "sdhi1", "sdhi0", + "mmc1", "mmc0"; + }; + }; }; diff --git a/dts/src/arm/r8a7790-lager.dts b/dts/src/arm/r8a7790-lager.dts index dd2fe46073..856b4236b6 100644 --- a/dts/src/arm/r8a7790-lager.dts +++ b/dts/src/arm/r8a7790-lager.dts @@ -29,12 +29,12 @@ memory@40000000 { device_type = "memory"; - reg = <0 0x40000000 0 0x80000000>; + reg = <0 0x40000000 0 0x40000000>; }; memory@180000000 { device_type = "memory"; - reg = <1 0x80000000 0 0x80000000>; + reg = <1 0x40000000 0 0xc0000000>; }; lbsc { @@ -204,6 +204,36 @@ "msiof1_tx"; renesas,function = "msiof1"; }; + + iic1_pins: iic1 { + renesas,groups = "iic1"; + renesas,function = "iic1"; + }; + + iic2_pins: iic2 { + renesas,groups = "iic2"; + renesas,function = "iic2"; + }; + + iic3_pins: iic3 { + renesas,groups = "iic3"; + renesas,function = "iic3"; + }; + + usb0_pins: usb0 { + renesas,groups = "usb0"; + renesas,function = "usb0"; + }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; + + usb2_pins: usb2 { + renesas,groups = "usb2"; + renesas,function = "usb2"; + }; }; ðer { @@ -317,3 +347,57 @@ cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&cpu0 { + cpu0-supply = <&vdd_dvfs>; +}; + +&iic0 { + status = "ok"; +}; + +&iic1 { + status = "ok"; + pinctrl-0 = <&iic1_pins>; + pinctrl-names = "default"; +}; + +&iic2 { + status = "ok"; + pinctrl-0 = <&iic2_pins>; + pinctrl-names = "default"; +}; + +&iic3 { + pinctrl-names = "default"; + pinctrl-0 = <&iic3_pins>; + status = "okay"; + + vdd_dvfs: regulator@68 { + compatible = "diasemi,da9210"; + reg = <0x68>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&pci0 { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&pci2 { + status = "okay"; + pinctrl-0 = <&usb2_pins>; + pinctrl-names = "default"; +}; diff --git a/dts/src/arm/r8a7790.dtsi b/dts/src/arm/r8a7790.dtsi index 7ff29601f9..d9ddecbb85 100644 --- a/dts/src/arm/r8a7790.dtsi +++ b/dts/src/arm/r8a7790.dtsi @@ -44,6 +44,17 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1300000000>; + voltage-tolerance = <1>; /* 1% */ + clocks = <&cpg_clocks R8A7790_CLK_Z>; + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; }; cpu1: cpu@1 { @@ -476,6 +487,15 @@ clock-output-names = "extal"; }; + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "pcie_bus"; + status = "disabled"; + }; + /* * The external audio clocks are configured as 0 Hz fixed frequency clocks by * default. Boards that provide audio clocks should override them. @@ -754,17 +774,17 @@ reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>, - <&hp_clk>, <&hp_clk>, <&rclk_clk>; + <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>; #clock-cells = <1>; renesas,clock-indices = < R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0 - R8A7790_CLK_IIC0 R8A7790_CLK_IIC1 R8A7790_CLK_CMT1 + R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1 >; clock-output-names = "iic2", "tpu0", "mmcif1", "sdhi3", "sdhi2", "sdhi1", "sdhi0", "mmcif0", - "iic0", "iic1", "cmt1"; + "iic0", "pciec", "iic1", "ssusb", "cmt1"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -824,6 +844,39 @@ "rcan1", "rcan0", "qspi_mod", "iic3", "i2c3", "i2c2", "i2c1", "i2c0"; }; + mstp10_clks: mstp10_clks@e6150998 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; + clocks = <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>; + + #clock-cells = <1>; + clock-indices = < + R8A7790_CLK_SSI_ALL + R8A7790_CLK_SSI9 R8A7790_CLK_SSI8 R8A7790_CLK_SSI7 R8A7790_CLK_SSI6 R8A7790_CLK_SSI5 + R8A7790_CLK_SSI4 R8A7790_CLK_SSI3 R8A7790_CLK_SSI2 R8A7790_CLK_SSI1 R8A7790_CLK_SSI0 + R8A7790_CLK_SCU_ALL + R8A7790_CLK_SCU_DVC1 R8A7790_CLK_SCU_DVC0 + R8A7790_CLK_SCU_SRC9 R8A7790_CLK_SCU_SRC8 R8A7790_CLK_SCU_SRC7 R8A7790_CLK_SCU_SRC6 R8A7790_CLK_SCU_SRC5 + R8A7790_CLK_SCU_SRC4 R8A7790_CLK_SCU_SRC3 R8A7790_CLK_SCU_SRC2 R8A7790_CLK_SCU_SRC1 R8A7790_CLK_SCU_SRC0 + >; + clock-output-names = + "ssi-all", + "ssi9", "ssi8", "ssi7", "ssi6", "ssi5", + "ssi4", "ssi3", "ssi2", "ssi1", "ssi0", + "scu-all", + "scu-dvc1", "scu-dvc0", + "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5", + "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0"; + }; }; qspi: spi@e6b10000 { @@ -876,4 +929,152 @@ #size-cells = <0>; status = "disabled"; }; + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7790"; + device_type = "pci"; + clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci1: pci@ee0b0000 { + compatible = "renesas,pci-r8a7790"; + device_type = "pci"; + clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + reg = <0 0xee0b0000 0 0xc00>, + <0 0xee0a0000 0 0x1100>; + interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci2: pci@ee0d0000 { + compatible = "renesas,pci-r8a7790"; + device_type = "pci"; + clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <2 2>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + }; + + pciec: pcie@fe000000 { + compatible = "renesas,pcie-r8a7790"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 + 0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>; + interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>, + <0 117 IRQ_TYPE_LEVEL_HIGH>, + <0 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + status = "disabled"; + }; + + rcar_sound: rcar_sound@0xec500000 { + #sound-dai-cells = <1>; + compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; + interrupt-parent = <&gic>; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x1280>; /* SSI */ + clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>, + <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>, + <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>, + <&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>, + <&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>, + <&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>, + <&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>, + <&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>, + <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>, + <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>, + <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>, + <&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", "src.5", + "src.4", "src.3", "src.2", "src.1", "src.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc@0 { }; + dvc1: dvc@1 { }; + }; + + rcar_sound,src { + src0: src@0 { }; + src1: src@1 { }; + src2: src@2 { }; + src3: src@3 { }; + src4: src@4 { }; + src5: src@5 { }; + src6: src@6 { }; + src7: src@7 { }; + src8: src@8 { }; + src9: src@9 { }; + }; + + rcar_sound,ssi { + ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; }; + ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; }; + ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; }; + ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; }; + ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; }; + ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; }; + ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; }; + ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; }; + ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; }; + ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; }; + }; + }; }; diff --git a/dts/src/arm/r8a7791-henninger.dts b/dts/src/arm/r8a7791-henninger.dts index cc6d992e8d..3a2ef0a2a1 100644 --- a/dts/src/arm/r8a7791-henninger.dts +++ b/dts/src/arm/r8a7791-henninger.dts @@ -110,6 +110,11 @@ renesas,function = "sdhi2"; }; + i2c2_pins: i2c2 { + renesas,groups = "i2c2"; + renesas,function = "i2c2"; + }; + qspi_pins: spi0 { renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; @@ -120,6 +125,16 @@ "msiof0_tx"; renesas,function = "msiof0"; }; + + usb0_pins: usb0 { + renesas,groups = "usb0"; + renesas,function = "usb0"; + }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; }; &scif0 { @@ -146,7 +161,7 @@ }; &sata0 { - status = "okay"; + status = "okay"; }; &sdhi0 { @@ -170,6 +185,14 @@ status = "okay"; }; +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; +}; + &qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; @@ -217,3 +240,23 @@ spi-cpha; }; }; + +&pci0 { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&pcie_bus_clk { + status = "okay"; +}; + +&pciec { + status = "okay"; +}; diff --git a/dts/src/arm/r8a7791-koelsch.dts b/dts/src/arm/r8a7791-koelsch.dts index 05d44f9b20..23486c081a 100644 --- a/dts/src/arm/r8a7791-koelsch.dts +++ b/dts/src/arm/r8a7791-koelsch.dts @@ -215,25 +215,6 @@ clock-frequency = <20000000>; }; -&i2c2 { - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - eeprom@50 { - compatible = "renesas,24c02"; - reg = <0x50>; - pagesize = <16>; - }; -}; - -&i2c6 { - status = "okay"; - clock-frequency = <100000>; -}; - &pfc { pinctrl-0 = <&du_pins>; pinctrl-names = "default"; @@ -293,6 +274,21 @@ "msiof0_tx"; renesas,function = "msiof0"; }; + + i2c6_pins: i2c6 { + renesas,groups = "i2c6"; + renesas,function = "i2c6"; + }; + + usb0_pins: usb0 { + renesas,groups = "usb0"; + renesas,function = "usb0"; + }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; }; ðer { @@ -408,3 +404,58 @@ spi-cpha; }; }; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "renesas,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + status = "okay"; + clock-frequency = <100000>; + + vdd_dvfs: regulator@68 { + compatible = "diasemi,da9210"; + reg = <0x68>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&pci0 { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&pcie_bus_clk { + status = "okay"; +}; + +&pciec { + status = "okay"; +}; + +&cpu0 { + cpu0-supply = <&vdd_dvfs>; +}; diff --git a/dts/src/arm/r8a7791.dtsi b/dts/src/arm/r8a7791.dtsi index 79f68acfd5..0d82a4b3c6 100644 --- a/dts/src/arm/r8a7791.dtsi +++ b/dts/src/arm/r8a7791.dtsi @@ -45,6 +45,17 @@ compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1500000000>; + voltage-tolerance = <1>; /* 1% */ + clocks = <&cpg_clocks R8A7791_CLK_Z>; + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; }; cpu1: cpu@1 { @@ -521,6 +532,38 @@ clock-output-names = "extal"; }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency clocks by + * default. Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "audio_clk_a"; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "audio_clk_b"; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "audio_clk_c"; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "pcie_bus"; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7791-cpg-clocks", @@ -743,30 +786,34 @@ compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&mp_clk>, <&mp_clk>, <&mp_clk>; + <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&zs_clk>, <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0 R8A7791_CLK_MSIOF2 R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1 R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2 + R8A7791_CLK_SYS_DMAC1 R8A7791_CLK_SYS_DMAC0 >; clock-output-names = "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", - "scifb1", "msiof1", "scifb2"; + "scifb1", "msiof1", "scifb2", + "sys-dmac1", "sys-dmac0"; }; mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>, - <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>; + <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>; #clock-cells = <1>; renesas,clock-indices = < R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0 - R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_IIC1 R8A7791_CLK_CMT1 + R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1 + R8A7791_CLK_SSUSB R8A7791_CLK_CMT1 >; clock-output-names = "tpu0", "sdhi2", "sdhi1", "sdhi0", - "mmcif0", "i2c7", "i2c8", "cmt1"; + "mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -828,6 +875,39 @@ "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; }; + mstp10_clks: mstp10_clks@e6150998 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; + clocks = <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, + <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, + <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, + <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, + <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, + <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, + <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>; + + #clock-cells = <1>; + clock-indices = < + R8A7791_CLK_SSI_ALL + R8A7791_CLK_SSI9 R8A7791_CLK_SSI8 R8A7791_CLK_SSI7 R8A7791_CLK_SSI6 R8A7791_CLK_SSI5 + R8A7791_CLK_SSI4 R8A7791_CLK_SSI3 R8A7791_CLK_SSI2 R8A7791_CLK_SSI1 R8A7791_CLK_SSI0 + R8A7791_CLK_SCU_ALL + R8A7791_CLK_SCU_DVC1 R8A7791_CLK_SCU_DVC0 + R8A7791_CLK_SCU_SRC9 R8A7791_CLK_SCU_SRC8 R8A7791_CLK_SCU_SRC7 R8A7791_CLK_SCU_SRC6 R8A7791_CLK_SCU_SRC5 + R8A7791_CLK_SCU_SRC4 R8A7791_CLK_SCU_SRC3 R8A7791_CLK_SCU_SRC2 R8A7791_CLK_SCU_SRC1 R8A7791_CLK_SCU_SRC0 + >; + clock-output-names = + "ssi-all", + "ssi9", "ssi8", "ssi7", "ssi6", "ssi5", + "ssi4", "ssi3", "ssi2", "ssi1", "ssi0", + "scu-all", + "scu-dvc1", "scu-dvc0", + "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5", + "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0"; + }; mstp11_clks: mstp11_clks@e615099c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; @@ -880,4 +960,132 @@ #size-cells = <0>; status = "disabled"; }; + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7791"; + device_type = "pci"; + clocks = <&mstp7_clks R8A7791_CLK_EHCI>; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7791"; + device_type = "pci"; + clocks = <&mstp7_clks R8A7791_CLK_EHCI>; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + }; + + pciec: pcie@fe000000 { + compatible = "renesas,pcie-r8a7791"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 + 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; + interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>, + <0 117 IRQ_TYPE_LEVEL_HIGH>, + <0 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + status = "disabled"; + }; + + rcar_sound: rcar_sound@0xec500000 { + #sound-dai-cells = <1>; + compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; + interrupt-parent = <&gic>; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x1280>; /* SSI */ + clocks = <&mstp10_clks R8A7791_CLK_SSI_ALL>, + <&mstp10_clks R8A7791_CLK_SSI9>, <&mstp10_clks R8A7791_CLK_SSI8>, + <&mstp10_clks R8A7791_CLK_SSI7>, <&mstp10_clks R8A7791_CLK_SSI6>, + <&mstp10_clks R8A7791_CLK_SSI5>, <&mstp10_clks R8A7791_CLK_SSI4>, + <&mstp10_clks R8A7791_CLK_SSI3>, <&mstp10_clks R8A7791_CLK_SSI2>, + <&mstp10_clks R8A7791_CLK_SSI1>, <&mstp10_clks R8A7791_CLK_SSI0>, + <&mstp10_clks R8A7791_CLK_SCU_SRC9>, <&mstp10_clks R8A7791_CLK_SCU_SRC8>, + <&mstp10_clks R8A7791_CLK_SCU_SRC7>, <&mstp10_clks R8A7791_CLK_SCU_SRC6>, + <&mstp10_clks R8A7791_CLK_SCU_SRC5>, <&mstp10_clks R8A7791_CLK_SCU_SRC4>, + <&mstp10_clks R8A7791_CLK_SCU_SRC3>, <&mstp10_clks R8A7791_CLK_SCU_SRC2>, + <&mstp10_clks R8A7791_CLK_SCU_SRC1>, <&mstp10_clks R8A7791_CLK_SCU_SRC0>, + <&mstp10_clks R8A7791_CLK_SCU_DVC0>, <&mstp10_clks R8A7791_CLK_SCU_DVC1>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", "src.5", + "src.4", "src.3", "src.2", "src.1", "src.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc@0 { }; + dvc1: dvc@1 { }; + }; + + rcar_sound,src { + src0: src@0 { }; + src1: src@1 { }; + src2: src@2 { }; + src3: src@3 { }; + src4: src@4 { }; + src5: src@5 { }; + src6: src@6 { }; + src7: src@7 { }; + src8: src@8 { }; + src9: src@9 { }; + }; + + rcar_sound,ssi { + ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; }; + ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; }; + ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; }; + ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; }; + ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; }; + ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; }; + ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; }; + ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; }; + ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; }; + ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; }; + }; + }; }; diff --git a/dts/src/arm/rk3066a-bqcurie2.dts b/dts/src/arm/rk3066a-bqcurie2.dts index afb327322a..042f821d9e 100644 --- a/dts/src/arm/rk3066a-bqcurie2.dts +++ b/dts/src/arm/rk3066a-bqcurie2.dts @@ -24,87 +24,171 @@ reg = <0x60000000 0x40000000>; }; - soc { - uart0: serial@10124000 { - status = "okay"; - }; + vcc_sd0: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "sdmmc-supply"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; - uart1: serial@10126000 { - status = "okay"; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button@0 { + gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ + linux,code = <116>; + label = "GPIO Key Power"; + linux,input-type = <1>; + gpio-key,wakeup = <1>; + debounce-interval = <100>; }; - - uart2: serial@20064000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_xfer>; - status = "okay"; + button@1 { + gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ + linux,code = <104>; + label = "GPIO Key Vol-"; + linux,input-type = <1>; + gpio-key,wakeup = <0>; + debounce-interval = <100>; }; + /* VOL+ comes somehow thru the ADC */ + }; +}; - uart3: serial@20068000 { - status = "okay"; - }; +&i2c1 { + status = "okay"; + clock-frequency = <400000>; - vcc_sd0: fixed-regulator { - compatible = "regulator-fixed"; - regulator-name = "sdmmc-supply"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; - startup-delay-us = <100000>; - }; + tps: tps@2d { + reg = <0x2d>; - dwmmc@10214000 { /* sdmmc */ - num-slots = <1>; - status = "okay"; + interrupt-parent = <&gpio6>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>; - vmmc-supply = <&vcc_sd0>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; + regulators { + vcc_rtc: regulator@0 { + regulator-name = "vcc_rtc"; + regulator-always-on; }; - }; - dwmmc@10218000 { /* wifi */ - num-slots = <1>; - status = "okay"; - non-removable; + vcc_io: regulator@1 { + regulator-name = "vcc_io"; + regulator-always-on; + }; - pinctrl-names = "default"; - pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; + vdd_arm: regulator@2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; + vcc_ddr: regulator@3 { + regulator-name = "vcc_ddr"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc18_cif: regulator@5 { + regulator-name = "vcc18_cif"; + regulator-always-on; + }; + + vdd_11: regulator@6 { + regulator-name = "vdd_11"; + regulator-always-on; + }; + + vcc_25: regulator@7 { + regulator-name = "vcc_25"; + regulator-always-on; + }; + + vcc_18: regulator@8 { + regulator-name = "vcc_18"; + regulator-always-on; + }; + + vcc25_hdmi: regulator@9 { + regulator-name = "vcc25_hdmi"; + regulator-always-on; + }; + + vcca_33: regulator@10 { + regulator-name = "vcca_33"; + regulator-always-on; }; - }; - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - button@0 { - gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ - linux,code = <116>; - label = "GPIO Key Power"; - linux,input-type = <1>; - gpio-key,wakeup = <1>; - debounce-interval = <100>; + vcc_tp: regulator@11 { + regulator-name = "vcc_tp"; + regulator-always-on; }; - button@1 { - gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ - linux,code = <104>; - label = "GPIO Key Vol-"; - linux,input-type = <1>; - gpio-key,wakeup = <0>; - debounce-interval = <100>; + + vcc28_cif: regulator@12 { + regulator-name = "vcc28_cif"; + regulator-always-on; }; - /* VOL+ comes somehow thru the ADC */ }; }; }; + +/* must be included after &tps gets defined */ +#include "tps65910.dtsi" + +&mmc0 { /* sdmmc */ + num-slots = <1>; + status = "okay"; + vmmc-supply = <&vcc_sd0>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; +}; + +&mmc1 { /* wifi */ + num-slots = <1>; + status = "okay"; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/dts/src/arm/rk3066a-clocks.dtsi b/dts/src/arm/rk3066a-clocks.dtsi deleted file mode 100644 index 6e307fc4c4..0000000000 --- a/dts/src/arm/rk3066a-clocks.dtsi +++ /dev/null @@ -1,299 +0,0 @@ -/* - * Copyright (c) 2013 MundoReader S.L. - * Author: Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/ { - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - compatible = "fixed-clock"; - clock-frequency = <0>; - #clock-cells = <0>; - }; - - xin24m: xin24m { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - #clock-cells = <0>; - }; - - dummy48m: dummy48m { - compatible = "fixed-clock"; - clock-frequency = <48000000>; - #clock-cells = <0>; - }; - - dummy150m: dummy150m { - compatible = "fixed-clock"; - clock-frequency = <150000000>; - #clock-cells = <0>; - }; - - clk_gates0: gate-clk@200000d0 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000d0 0x4>; - clocks = <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_core_periph", "gate_cpu_gpll", - "gate_ddrphy", "gate_aclk_cpu", - "gate_hclk_cpu", "gate_pclk_cpu", - "gate_atclk_cpu", "gate_i2s0", - "gate_i2s0_frac", "gate_i2s1", - "gate_i2s1_frac", "gate_i2s2", - "gate_i2s2_frac", "gate_spdif", - "gate_spdif_frac", "gate_testclk"; - - #clock-cells = <1>; - }; - - clk_gates1: gate-clk@200000d4 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000d4 0x4>; - clocks = <&xin24m>, <&xin24m>, - <&xin24m>, <&dummy>, - <&dummy>, <&xin24m>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>; - - clock-output-names = - "gate_timer0", "gate_timer1", - "gate_timer2", "gate_jtag", - "gate_aclk_lcdc1_src", "gate_otgphy0", - "gate_otgphy1", "gate_ddr_gpll", - "gate_uart0", "gate_frac_uart0", - "gate_uart1", "gate_frac_uart1", - "gate_uart2", "gate_frac_uart2", - "gate_uart3", "gate_frac_uart3"; - - #clock-cells = <1>; - }; - - clk_gates2: gate-clk@200000d8 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000d8 0x4>; - clocks = <&clk_gates2 1>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&clk_gates2 3>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy48m>, - <&dummy>, <&dummy48m>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_periph_src", "gate_aclk_periph", - "gate_hclk_periph", "gate_pclk_periph", - "gate_smc", "gate_mac", - "gate_hsadc", "gate_hsadc_frac", - "gate_saradc", "gate_spi0", - "gate_spi1", "gate_mmc0", - "gate_mac_lbtest", "gate_mmc1", - "gate_emmc", "gate_tsadc"; - - #clock-cells = <1>; - }; - - clk_gates3: gate-clk@200000dc { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000dc 0x4>; - clocks = <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_aclk_lcdc0_src", "gate_dclk_lcdc0", - "gate_dclk_lcdc1", "gate_pclkin_cif0", - "gate_pclkin_cif1", "reserved", - "reserved", "gate_cif0_out", - "gate_cif1_out", "gate_aclk_vepu", - "gate_hclk_vepu", "gate_aclk_vdpu", - "gate_hclk_vdpu", "gate_gpu_src", - "reserved", "gate_xin27m"; - - #clock-cells = <1>; - }; - - clk_gates4: gate-clk@200000e0 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000e0 0x4>; - clocks = <&clk_gates2 2>, <&clk_gates2 3>, - <&clk_gates2 1>, <&clk_gates2 1>, - <&clk_gates2 1>, <&clk_gates2 2>, - <&clk_gates2 2>, <&clk_gates2 2>, - <&clk_gates0 4>, <&clk_gates0 4>, - <&clk_gates0 3>, <&clk_gates0 3>, - <&clk_gates0 3>, <&clk_gates2 3>, - <&clk_gates0 4>; - - clock-output-names = - "gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix", - "gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix", - "gate_aclk_pei_niu", "gate_hclk_usb_peri", - "gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri", - "gate_hclk_cpubus", "gate_hclk_ahb2apb", - "gate_aclk_strc_sys", "gate_aclk_l2mem_con", - "gate_aclk_intmem", "gate_pclk_tsadc", - "gate_hclk_hdmi"; - - #clock-cells = <1>; - }; - - clk_gates5: gate-clk@200000e4 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000e4 0x4>; - clocks = <&clk_gates0 3>, <&clk_gates2 1>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates0 4>, <&clk_gates0 5>, - <&clk_gates2 1>, <&clk_gates2 2>, - <&clk_gates2 2>, <&clk_gates2 2>, - <&clk_gates2 2>, <&clk_gates4 5>, - <&clk_gates4 5>, <&dummy>; - - clock-output-names = - "gate_aclk_dmac1", "gate_aclk_dmac2", - "gate_pclk_efuse", "gate_pclk_tzpc", - "gate_pclk_grf", "gate_pclk_pmu", - "gate_hclk_rom", "gate_pclk_ddrupctl", - "gate_aclk_smc", "gate_hclk_nandc", - "gate_hclk_mmc0", "gate_hclk_mmc1", - "gate_hclk_emmc", "gate_hclk_otg0", - "gate_hclk_otg1", "gate_aclk_gpu"; - - #clock-cells = <1>; - }; - - clk_gates6: gate-clk@200000e8 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000e8 0x4>; - clocks = <&clk_gates3 0>, <&clk_gates0 4>, - <&clk_gates0 4>, <&clk_gates1 4>, - <&clk_gates0 4>, <&clk_gates3 0>, - <&clk_gates0 4>, <&clk_gates1 4>, - <&clk_gates3 0>, <&clk_gates0 4>, - <&clk_gates0 4>, <&clk_gates1 4>, - <&clk_gates0 4>, <&clk_gates3 0>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_aclk_lcdc0", "gate_hclk_lcdc0", - "gate_hclk_lcdc1", "gate_aclk_lcdc1", - "gate_hclk_cif0", "gate_aclk_cif0", - "gate_hclk_cif1", "gate_aclk_cif1", - "gate_aclk_ipp", "gate_hclk_ipp", - "gate_hclk_rga", "gate_aclk_rga", - "gate_hclk_vio_bus", "gate_aclk_vio0", - "gate_aclk_vcodec", "gate_shclk_vio_h2h"; - - #clock-cells = <1>; - }; - - clk_gates7: gate-clk@200000ec { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000ec 0x4>; - clocks = <&clk_gates2 2>, <&clk_gates0 4>, - <&clk_gates0 4>, <&clk_gates0 4>, - <&clk_gates0 4>, <&clk_gates2 2>, - <&clk_gates2 2>, <&clk_gates0 5>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates0 5>, <&clk_gates2 3>, - <&clk_gates2 3>, <&clk_gates2 3>, - <&clk_gates2 3>, <&clk_gates2 3>; - - clock-output-names = - "gate_hclk_emac", "gate_hclk_spdif", - "gate_hclk_i2s0_2ch", "gate_hclk_i2s1_2ch", - "gate_hclk_i2s_8ch", "gate_hclk_hsadc", - "gate_hclk_pidf", "gate_pclk_timer0", - "gate_pclk_timer1", "gate_pclk_timer2", - "gate_pclk_pwm01", "gate_pclk_pwm23", - "gate_pclk_spi0", "gate_pclk_spi1", - "gate_pclk_saradc", "gate_pclk_wdt"; - - #clock-cells = <1>; - }; - - clk_gates8: gate-clk@200000f0 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000f0 0x4>; - clocks = <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates2 3>, <&clk_gates2 3>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates2 3>, <&clk_gates2 3>, - <&clk_gates2 3>, <&clk_gates0 5>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates2 3>, <&clk_gates2 3>, - <&dummy>, <&clk_gates0 5>; - - clock-output-names = - "gate_pclk_uart0", "gate_pclk_uart1", - "gate_pclk_uart2", "gate_pclk_uart3", - "gate_pclk_i2c0", "gate_pclk_i2c1", - "gate_pclk_i2c2", "gate_pclk_i2c3", - "gate_pclk_i2c4", "gate_pclk_gpio0", - "gate_pclk_gpio1", "gate_pclk_gpio2", - "gate_pclk_gpio3", "gate_pclk_gpio4", - "reserved", "gate_pclk_gpio6"; - - #clock-cells = <1>; - }; - - clk_gates9: gate-clk@200000f4 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000f4 0x4>; - clocks = <&dummy>, <&clk_gates0 5>, - <&dummy>, <&dummy>, - <&dummy>, <&clk_gates1 4>, - <&clk_gates0 5>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>; - - clock-output-names = - "gate_clk_core_dbg", "gate_pclk_dbg", - "gate_clk_trace", "gate_atclk", - "gate_clk_l2c", "gate_aclk_vio1", - "gate_pclk_publ", "gate_aclk_intmem0", - "gate_aclk_intmem1", "gate_aclk_intmem2", - "gate_aclk_intmem3"; - - #clock-cells = <1>; - }; - }; - -}; diff --git a/dts/src/arm/rk3066a.dtsi b/dts/src/arm/rk3066a.dtsi index 4387cfd420..879a818fba 100644 --- a/dts/src/arm/rk3066a.dtsi +++ b/dts/src/arm/rk3066a.dtsi @@ -15,8 +15,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/clock/rk3066a-cru.h> #include "rk3xxx.dtsi" -#include "rk3066a-clocks.dtsi" / { compatible = "rockchip,rk3066a"; @@ -40,247 +40,392 @@ }; }; - soc { - timer@20038000 { - compatible = "snps,dw-apb-timer-osc"; - reg = <0x20038000 0x100>; - interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates1 0>, <&clk_gates7 7>; - clock-names = "timer", "pclk"; + sram: sram@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10080000 0x10000>; + + smp-sram@0 { + compatible = "rockchip,rk3066-smp-sram"; + reg = <0x0 0x50>; }; + }; + + cru: clock-controller@20000000 { + compatible = "rockchip,rk3066a-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; - timer@2003a000 { - compatible = "snps,dw-apb-timer-osc"; - reg = <0x2003a000 0x100>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates1 1>, <&clk_gates7 8>; - clock-names = "timer", "pclk"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + timer@2000e000 { + compatible = "snps,dw-apb-timer-osc"; + reg = <0x2000e000 0x100>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>; + clock-names = "timer", "pclk"; + }; + + timer@20038000 { + compatible = "snps,dw-apb-timer-osc"; + reg = <0x20038000 0x100>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>; + clock-names = "timer", "pclk"; + }; + + timer@2003a000 { + compatible = "snps,dw-apb-timer-osc"; + reg = <0x2003a000 0x100>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>; + clock-names = "timer", "pclk"; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3066a-pinctrl"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@20034000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20034000 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO0>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; }; - timer@2000e000 { - compatible = "snps,dw-apb-timer-osc"; - reg = <0x2000e000 0x100>; - interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates1 2>, <&clk_gates7 9>; - clock-names = "timer", "pclk"; + gpio1: gpio1@2003c000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003c000 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; }; - sram: sram@10080000 { - compatible = "mmio-sram"; - reg = <0x10080000 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x10080000 0x10000>; + gpio2: gpio2@2003e000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003e000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; - smp-sram@0 { - compatible = "rockchip,rk3066-smp-sram"; - reg = <0x0 0x50>; - }; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@20080000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20080000 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; }; - pinctrl@20008000 { - compatible = "rockchip,rk3066a-pinctrl"; - rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + gpio4: gpio4@20084000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20084000 0x100>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO4>; - gpio0: gpio0@20034000 { - compatible = "rockchip,gpio-bank"; - reg = <0x20034000 0x100>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 9>; + gpio-controller; + #gpio-cells = <2>; - gpio-controller; - #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; - interrupt-controller; - #interrupt-cells = <2>; + gpio6: gpio6@2000a000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2000a000 0x100>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO6>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_default: pcfg_pull_default { + bias-pull-pin-default; + }; + + pcfg_pull_none: pcfg_pull_none { + bias-disable; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = <RK_GPIO2 28 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO2 29 RK_FUNC_1 &pcfg_pull_none>; }; + }; - gpio1: gpio1@2003c000 { - compatible = "rockchip,gpio-bank"; - reg = <0x2003c000 0x100>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 10>; + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <RK_GPIO2 30 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO2 31 RK_FUNC_1 &pcfg_pull_none>; + }; + }; - gpio-controller; - #gpio-cells = <2>; + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = <RK_GPIO3 0 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; - interrupt-controller; - #interrupt-cells = <2>; + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <RK_GPIO3 2 RK_FUNC_2 &pcfg_pull_none>, + <RK_GPIO3 3 RK_FUNC_2 &pcfg_pull_none>; }; + }; - gpio2: gpio2@2003e000 { - compatible = "rockchip,gpio-bank"; - reg = <0x2003e000 0x100>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 11>; + i2c4 { + i2c4_xfer: i2c4-xfer { + rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>; + }; + }; - gpio-controller; - #gpio-cells = <2>; + pwm0 { + pwm0_out: pwm0-out { + rockchip,pins = <RK_GPIO0 3 RK_FUNC_1 &pcfg_pull_none>; + }; + }; - interrupt-controller; - #interrupt-cells = <2>; + pwm1 { + pwm1_out: pwm1-out { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_1 &pcfg_pull_none>; }; + }; - gpio3: gpio3@20080000 { - compatible = "rockchip,gpio-bank"; - reg = <0x20080000 0x100>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 12>; + pwm2 { + pwm2_out: pwm2-out { + rockchip,pins = <RK_GPIO0 30 RK_FUNC_1 &pcfg_pull_none>; + }; + }; - gpio-controller; - #gpio-cells = <2>; + pwm3 { + pwm3_out: pwm3-out { + rockchip,pins = <RK_GPIO0 31 RK_FUNC_1 &pcfg_pull_none>; + }; + }; - interrupt-controller; - #interrupt-cells = <2>; + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>; }; - gpio4: gpio4@20084000 { - compatible = "rockchip,gpio-bank"; - reg = <0x20084000 0x100>; - interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 13>; + uart0_cts: uart0-cts { + rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>; + }; - gpio-controller; - #gpio-cells = <2>; + uart0_rts: uart0-rts { + rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>; + }; - interrupt-controller; - #interrupt-cells = <2>; + uart1_cts: uart1-cts { + rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>; }; - gpio6: gpio6@2000a000 { - compatible = "rockchip,gpio-bank"; - reg = <0x2000a000 0x100>; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 15>; + uart1_rts: uart1-rts { + rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>; + }; + }; - gpio-controller; - #gpio-cells = <2>; + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>; + }; + /* no rts / cts for uart2 */ + }; - interrupt-controller; - #interrupt-cells = <2>; + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>; }; - pcfg_pull_default: pcfg_pull_default { - bias-pull-pin-default; + uart3_cts: uart3-cts { + rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>; }; - pcfg_pull_none: pcfg_pull_none { - bias-disable; + uart3_rts: uart3-rts { + rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>; }; + }; - uart0 { - uart0_xfer: uart0-xfer { - rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>; - }; + sd0 { + sd0_clk: sd0-clk { + rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>; + }; - uart0_cts: uart0-cts { - rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>; - }; + sd0_cmd: sd0-cmd { + rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>; + }; - uart0_rts: uart0-rts { - rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>; - }; + sd0_cd: sd0-cd { + rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>; }; - uart1 { - uart1_xfer: uart1-xfer { - rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>; - }; + sd0_wp: sd0-wp { + rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>; + }; - uart1_cts: uart1-cts { - rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>; - }; + sd0_bus1: sd0-bus-width1 { + rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>; + }; - uart1_rts: uart1-rts { - rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>; - }; + sd0_bus4: sd0-bus-width4 { + rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>; }; + }; - uart2 { - uart2_xfer: uart2-xfer { - rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>; - }; - /* no rts / cts for uart2 */ + sd1 { + sd1_clk: sd1-clk { + rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>; }; - uart3 { - uart3_xfer: uart3-xfer { - rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>; - }; + sd1_cmd: sd1-cmd { + rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>; + }; - uart3_cts: uart3-cts { - rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>; - }; + sd1_cd: sd1-cd { + rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>; + }; - uart3_rts: uart3-rts { - rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>; - }; + sd1_wp: sd1-wp { + rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>; }; - sd0 { - sd0_clk: sd0-clk { - rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>; - }; - - sd0_cmd: sd0-cmd { - rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>; - }; - - sd0_cd: sd0-cd { - rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>; - }; - - sd0_wp: sd0-wp { - rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>; - }; - - sd0_bus1: sd0-bus-width1 { - rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>; - }; - - sd0_bus4: sd0-bus-width4 { - rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>; - }; + sd1_bus1: sd1-bus-width1 { + rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>; }; - sd1 { - sd1_clk: sd1-clk { - rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>; - }; - - sd1_cmd: sd1-cmd { - rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>; - }; - - sd1_cd: sd1-cd { - rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>; - }; - - sd1_wp: sd1-wp { - rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>; - }; - - sd1_bus1: sd1-bus-width1 { - rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>; - }; - - sd1_bus4: sd1-bus-width4 { - rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>, - <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>; - }; + sd1_bus4: sd1-bus-width4 { + rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>, + <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>; }; }; }; }; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_xfer>; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_out>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_out>; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_out>; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_out>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>; +}; + +&wdt { + compatible = "rockchip,rk3066-wdt", "snps,dw-wdt"; +}; diff --git a/dts/src/arm/rk3188-clocks.dtsi b/dts/src/arm/rk3188-clocks.dtsi deleted file mode 100644 index b1b92dc245..0000000000 --- a/dts/src/arm/rk3188-clocks.dtsi +++ /dev/null @@ -1,289 +0,0 @@ -/* - * Copyright (c) 2013 MundoReader S.L. - * Author: Heiko Stuebner <heiko@sntech.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/ { - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - compatible = "fixed-clock"; - clock-frequency = <0>; - #clock-cells = <0>; - }; - - xin24m: xin24m { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - #clock-cells = <0>; - }; - - dummy48m: dummy48m { - compatible = "fixed-clock"; - clock-frequency = <48000000>; - #clock-cells = <0>; - }; - - dummy150m: dummy150m { - compatible = "fixed-clock"; - clock-frequency = <150000000>; - #clock-cells = <0>; - }; - - clk_gates0: gate-clk@200000d0 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000d0 0x4>; - clocks = <&dummy150m>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_core_periph", "gate_cpu_gpll", - "gate_ddrphy", "gate_aclk_cpu", - "gate_hclk_cpu", "gate_pclk_cpu", - "gate_atclk_cpu", "gate_aclk_core", - "reserved", "gate_i2s0", - "gate_i2s0_frac", "reserved", - "reserved", "gate_spdif", - "gate_spdif_frac", "gate_testclk"; - - #clock-cells = <1>; - }; - - clk_gates1: gate-clk@200000d4 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000d4 0x4>; - clocks = <&xin24m>, <&xin24m>, - <&xin24m>, <&dummy>, - <&dummy>, <&xin24m>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>; - - clock-output-names = - "gate_timer0", "gate_timer1", - "gate_timer3", "gate_jtag", - "gate_aclk_lcdc1_src", "gate_otgphy0", - "gate_otgphy1", "gate_ddr_gpll", - "gate_uart0", "gate_frac_uart0", - "gate_uart1", "gate_frac_uart1", - "gate_uart2", "gate_frac_uart2", - "gate_uart3", "gate_frac_uart3"; - - #clock-cells = <1>; - }; - - clk_gates2: gate-clk@200000d8 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000d8 0x4>; - clocks = <&clk_gates2 1>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&clk_gates2 3>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy48m>, - <&dummy>, <&dummy48m>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_periph_src", "gate_aclk_periph", - "gate_hclk_periph", "gate_pclk_periph", - "gate_smc", "gate_mac", - "gate_hsadc", "gate_hsadc_frac", - "gate_saradc", "gate_spi0", - "gate_spi1", "gate_mmc0", - "gate_mac_lbtest", "gate_mmc1", - "gate_emmc", "reserved"; - - #clock-cells = <1>; - }; - - clk_gates3: gate-clk@200000dc { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000dc 0x4>; - clocks = <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&xin24m>, <&xin24m>, - <&dummy>, <&dummy>, - <&xin24m>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&xin24m>, <&dummy>; - - clock-output-names = - "gate_aclk_lcdc0_src", "gate_dclk_lcdc0", - "gate_dclk_lcdc1", "gate_pclkin_cif0", - "gate_timer2", "gate_timer4", - "gate_hsicphy", "gate_cif0_out", - "gate_timer5", "gate_aclk_vepu", - "gate_hclk_vepu", "gate_aclk_vdpu", - "gate_hclk_vdpu", "reserved", - "gate_timer6", "gate_aclk_gpu_src"; - - #clock-cells = <1>; - }; - - clk_gates4: gate-clk@200000e0 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000e0 0x4>; - clocks = <&clk_gates2 2>, <&clk_gates2 3>, - <&clk_gates2 1>, <&clk_gates2 1>, - <&clk_gates2 1>, <&clk_gates2 2>, - <&clk_gates2 2>, <&clk_gates2 2>, - <&clk_gates0 4>, <&clk_gates0 4>, - <&clk_gates0 3>, <&dummy>, - <&clk_gates0 3>, <&dummy>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix", - "gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix", - "gate_aclk_pei_niu", "gate_hclk_usb_peri", - "gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri", - "gate_hclk_cpubus", "gate_hclk_ahb2apb", - "gate_aclk_strc_sys", "reserved", - "gate_aclk_intmem", "reserved", - "gate_hclk_imem1", "gate_hclk_imem0"; - - #clock-cells = <1>; - }; - - clk_gates5: gate-clk@200000e4 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000e4 0x4>; - clocks = <&clk_gates0 3>, <&clk_gates2 1>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates0 4>, <&clk_gates0 5>, - <&clk_gates2 1>, <&clk_gates2 2>, - <&clk_gates2 2>, <&clk_gates2 2>, - <&clk_gates2 2>, <&clk_gates4 5>; - - clock-output-names = - "gate_aclk_dmac1", "gate_aclk_dmac2", - "gate_pclk_efuse", "gate_pclk_tzpc", - "gate_pclk_grf", "gate_pclk_pmu", - "gate_hclk_rom", "gate_pclk_ddrupctl", - "gate_aclk_smc", "gate_hclk_nandc", - "gate_hclk_mmc0", "gate_hclk_mmc1", - "gate_hclk_emmc", "gate_hclk_otg0"; - - #clock-cells = <1>; - }; - - clk_gates6: gate-clk@200000e8 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000e8 0x4>; - clocks = <&clk_gates3 0>, <&clk_gates0 4>, - <&clk_gates0 4>, <&clk_gates1 4>, - <&clk_gates0 4>, <&clk_gates3 0>, - <&dummy>, <&dummy>, - <&clk_gates3 0>, <&clk_gates0 4>, - <&clk_gates0 4>, <&clk_gates1 4>, - <&clk_gates0 4>, <&clk_gates3 0>; - - clock-output-names = - "gate_aclk_lcdc0", "gate_hclk_lcdc0", - "gate_hclk_lcdc1", "gate_aclk_lcdc1", - "gate_hclk_cif0", "gate_aclk_cif0", - "reserved", "reserved", - "gate_aclk_ipp", "gate_hclk_ipp", - "gate_hclk_rga", "gate_aclk_rga", - "gate_hclk_vio_bus", "gate_aclk_vio0"; - - #clock-cells = <1>; - }; - - clk_gates7: gate-clk@200000ec { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000ec 0x4>; - clocks = <&clk_gates2 2>, <&clk_gates0 4>, - <&clk_gates0 4>, <&dummy>, - <&dummy>, <&clk_gates2 2>, - <&clk_gates2 2>, <&clk_gates0 5>, - <&dummy>, <&clk_gates0 5>, - <&clk_gates0 5>, <&clk_gates2 3>, - <&clk_gates2 3>, <&clk_gates2 3>, - <&clk_gates2 3>, <&clk_gates2 3>; - - clock-output-names = - "gate_hclk_emac", "gate_hclk_spdif", - "gate_hclk_i2s0_2ch", "gate_hclk_otg1", - "gate_hclk_hsic", "gate_hclk_hsadc", - "gate_hclk_pidf", "gate_pclk_timer0", - "reserved", "gate_pclk_timer2", - "gate_pclk_pwm01", "gate_pclk_pwm23", - "gate_pclk_spi0", "gate_pclk_spi1", - "gate_pclk_saradc", "gate_pclk_wdt"; - - #clock-cells = <1>; - }; - - clk_gates8: gate-clk@200000f0 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000f0 0x4>; - clocks = <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates2 3>, <&clk_gates2 3>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates2 3>, <&clk_gates2 3>, - <&clk_gates2 3>, <&clk_gates0 5>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates2 3>, <&dummy>; - - clock-output-names = - "gate_pclk_uart0", "gate_pclk_uart1", - "gate_pclk_uart2", "gate_pclk_uart3", - "gate_pclk_i2c0", "gate_pclk_i2c1", - "gate_pclk_i2c2", "gate_pclk_i2c3", - "gate_pclk_i2c4", "gate_pclk_gpio0", - "gate_pclk_gpio1", "gate_pclk_gpio2", - "gate_pclk_gpio3", "gate_aclk_gps"; - - #clock-cells = <1>; - }; - - clk_gates9: gate-clk@200000f4 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000f4 0x4>; - clocks = <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_clk_core_dbg", "gate_pclk_dbg", - "gate_clk_trace", "gate_atclk", - "gate_clk_l2c", "gate_aclk_vio1", - "gate_pclk_publ", "gate_aclk_gpu"; - - #clock-cells = <1>; - }; - }; - -}; diff --git a/dts/src/arm/rk3188-radxarock.dts b/dts/src/arm/rk3188-radxarock.dts index a5eee55079..171b610db7 100644 --- a/dts/src/arm/rk3188-radxarock.dts +++ b/dts/src/arm/rk3188-radxarock.dts @@ -23,59 +23,205 @@ reg = <0x60000000 0x80000000>; }; - soc { - uart0: serial@10124000 { - status = "okay"; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button@0 { + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + linux,code = <116>; + label = "GPIO Key Power"; + linux,input-type = <1>; + gpio-key,wakeup = <1>; + debounce-interval = <100>; }; + }; - uart1: serial@10126000 { - status = "okay"; + gpio-leds { + compatible = "gpio-leds"; + + green { + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + default-state = "off"; }; - uart2: serial@20064000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_xfer>; - status = "okay"; + yellow { + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + default-state = "off"; }; - uart3: serial@20068000 { - status = "okay"; + sleep { + gpios = <&gpio0 15 0>; + default-state = "off"; }; + }; - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - button@0 { - gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; - linux,code = <116>; - label = "GPIO Key Power"; - linux,input-type = <1>; - gpio-key,wakeup = <1>; - debounce-interval = <100>; + ir_recv: gpio-ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 10 1>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_recv_pin>; + }; + + vcc_sd0: sdmmc-regulator { + compatible = "regulator-fixed"; + regulator-name = "sdmmc-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 1 GPIO_ACTIVE_LOW>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + act8846: act8846@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&act8846_dvs0_ctl>; + + regulators { + vcc_ddr: REG1 { + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd_log: REG2 { + regulator-name = "VDD_LOG"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vdd_arm: REG3 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + vcc_io: REG4 { + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_10: REG5 { + regulator-name = "VDD_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vdd_hdmi: REG6 { + regulator-name = "VDD_HDMI"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vcc18: REG7 { + regulator-name = "VCC_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; }; - }; - gpio-leds { - compatible = "gpio-leds"; + vcca_33: REG8 { + regulator-name = "VCCA_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_rmii: REG9 { + regulator-name = "VCC_RMII"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - green { - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - default-state = "off"; + vccio_wl: REG10 { + regulator-name = "VCCIO_WL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; - yellow { - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - default-state = "off"; + vcc_18: REG11 { + regulator-name = "VCC18_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; }; - sleep { - gpios = <&gpio0 15 0>; - default-state = "off"; + vcc28: REG12 { + regulator-name = "VCC_28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; }; }; + }; +}; + +&mmc0 { + num-slots = <1>; + status = "okay"; + vmmc-supply = <&vcc_sd0>; + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; }; }; + +&pinctrl { + pcfg_output_low: pcfg-output-low { + output-low; + }; + + act8846 { + act8846_dvs0_ctl: act8846-dvs0-ctl { + rockchip,pins = <RK_GPIO3 27 RK_FUNC_GPIO &pcfg_output_low>; + }; + }; + + ir-receiver { + ir_recv_pin: ir-recv-pin { + rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/dts/src/arm/rk3188.dtsi b/dts/src/arm/rk3188.dtsi index 238c996d4a..ee801a9c6b 100644 --- a/dts/src/arm/rk3188.dtsi +++ b/dts/src/arm/rk3188.dtsi @@ -15,8 +15,8 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/clock/rk3188-cru.h> #include "rk3xxx.dtsi" -#include "rk3188-clocks.dtsi" / { compatible = "rockchip,rk3188"; @@ -52,215 +52,355 @@ }; }; - soc { - global-timer@1013c200 { - interrupts = <GIC_PPI 11 0xf04>; + sram: sram@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10080000 0x8000>; + + smp-sram@0 { + compatible = "rockchip,rk3066-smp-sram"; + reg = <0x0 0x50>; }; + }; + + cru: clock-controller@20000000 { + compatible = "rockchip,rk3188-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3188-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmu>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@0x2000a000 { + compatible = "rockchip,rk3188-gpio-bank0"; + reg = <0x2000a000 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO0>; + + gpio-controller; + #gpio-cells = <2>; - local-timer@1013c600 { - interrupts = <GIC_PPI 13 0xf04>; + interrupt-controller; + #interrupt-cells = <2>; }; - sram: sram@10080000 { - compatible = "mmio-sram"; - reg = <0x10080000 0x8000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x10080000 0x8000>; + gpio1: gpio1@0x2003c000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003c000 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; - smp-sram@0 { - compatible = "rockchip,rk3066-smp-sram"; - reg = <0x0 0x50>; - }; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; }; - pinctrl@20008000 { - compatible = "rockchip,rk3188-pinctrl"; - rockchip,grf = <&grf>; - rockchip,pmu = <&pmu>; + gpio2: gpio2@2003e000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003e000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + gpio-controller; + #gpio-cells = <2>; - gpio0: gpio0@0x2000a000 { - compatible = "rockchip,rk3188-gpio-bank0"; - reg = <0x2000a000 0x100>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 9>; + interrupt-controller; + #interrupt-cells = <2>; + }; - gpio-controller; - #gpio-cells = <2>; + gpio3: gpio3@20080000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20080000 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>; - interrupt-controller; - #interrupt-cells = <2>; - }; + gpio-controller; + #gpio-cells = <2>; - gpio1: gpio1@0x2003c000 { - compatible = "rockchip,gpio-bank"; - reg = <0x2003c000 0x100>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 10>; + interrupt-controller; + #interrupt-cells = <2>; + }; - gpio-controller; - #gpio-cells = <2>; + pcfg_pull_up: pcfg_pull_up { + bias-pull-up; + }; - interrupt-controller; - #interrupt-cells = <2>; - }; + pcfg_pull_down: pcfg_pull_down { + bias-pull-down; + }; - gpio2: gpio2@2003e000 { - compatible = "rockchip,gpio-bank"; - reg = <0x2003e000 0x100>; - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 11>; + pcfg_pull_none: pcfg_pull_none { + bias-disable; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = <RK_GPIO1 24 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 25 RK_FUNC_1 &pcfg_pull_none>; + }; + }; - gpio-controller; - #gpio-cells = <2>; + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <RK_GPIO1 26 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 27 RK_FUNC_1 &pcfg_pull_none>; + }; + }; - interrupt-controller; - #interrupt-cells = <2>; + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = <RK_GPIO1 28 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 29 RK_FUNC_1 &pcfg_pull_none>; }; + }; - gpio3: gpio3@20080000 { - compatible = "rockchip,gpio-bank"; - reg = <0x20080000 0x100>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 12>; + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <RK_GPIO3 14 RK_FUNC_2 &pcfg_pull_none>, + <RK_GPIO3 15 RK_FUNC_2 &pcfg_pull_none>; + }; + }; - gpio-controller; - #gpio-cells = <2>; + i2c4 { + i2c4_xfer: i2c4-xfer { + rockchip,pins = <RK_GPIO1 30 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO1 31 RK_FUNC_1 &pcfg_pull_none>; + }; + }; - interrupt-controller; - #interrupt-cells = <2>; + pwm0 { + pwm0_out: pwm0-out { + rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_none>; }; + }; - pcfg_pull_up: pcfg_pull_up { - bias-pull-up; + pwm1 { + pwm1_out: pwm1-out { + rockchip,pins = <RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_none>; }; + }; - pcfg_pull_down: pcfg_pull_down { - bias-pull-down; + pwm2 { + pwm2_out: pwm2-out { + rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_none>; }; + }; - pcfg_pull_none: pcfg_pull_none { - bias-disable; + pwm3 { + pwm3_out: pwm3-out { + rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_none>; }; + }; - uart0 { - uart0_xfer: uart0-xfer { - rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>, - <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>; - }; + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_up>, + <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>; + }; - uart0_cts: uart0-cts { - rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>; - }; + uart0_cts: uart0-cts { + rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>; + }; - uart0_rts: uart0-rts { - rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>; - }; + uart0_rts: uart0-rts { + rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>; }; + }; - uart1 { - uart1_xfer: uart1-xfer { - rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>, - <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>; - }; + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_up>, + <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>; + }; - uart1_cts: uart1-cts { - rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>; - }; + uart1_cts: uart1-cts { + rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>; + }; - uart1_rts: uart1-rts { - rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>; - }; + uart1_rts: uart1-rts { + rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>; }; + }; - uart2 { - uart2_xfer: uart2-xfer { - rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>, - <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>; - }; - /* no rts / cts for uart2 */ + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_up>, + <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>; }; + /* no rts / cts for uart2 */ + }; - uart3 { - uart3_xfer: uart3-xfer { - rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>, - <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>; - }; + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_up>, + <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>; + }; - uart3_cts: uart3-cts { - rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>; - }; + uart3_cts: uart3-cts { + rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>; + }; - uart3_rts: uart3-rts { - rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>; - }; + uart3_rts: uart3-rts { + rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>; }; + }; - sd0 { - sd0_clk: sd0-clk { - rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>; - }; + sd0 { + sd0_clk: sd0-clk { + rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>; + }; - sd0_cmd: sd0-cmd { - rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>; - }; + sd0_cmd: sd0-cmd { + rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>; + }; - sd0_cd: sd0-cd { - rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>; - }; + sd0_cd: sd0-cd { + rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>; + }; - sd0_wp: sd0-wp { - rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>; - }; + sd0_wp: sd0-wp { + rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>; + }; - sd0_pwr: sd0-pwr { - rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>; - }; + sd0_pwr: sd0-pwr { + rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>; + }; - sd0_bus1: sd0-bus-width1 { - rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>; - }; + sd0_bus1: sd0-bus-width1 { + rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>; + }; - sd0_bus4: sd0-bus-width4 { - rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>; - }; + sd0_bus4: sd0-bus-width4 { + rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>; }; + }; - sd1 { - sd1_clk: sd1-clk { - rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>; - }; + sd1 { + sd1_clk: sd1-clk { + rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>; + }; - sd1_cmd: sd1-cmd { - rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>; - }; + sd1_cmd: sd1-cmd { + rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>; + }; - sd1_cd: sd1-cd { - rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>; - }; + sd1_cd: sd1-cd { + rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>; + }; - sd1_wp: sd1-wp { - rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>; - }; + sd1_wp: sd1-wp { + rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>; + }; - sd1_bus1: sd1-bus-width1 { - rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>; - }; + sd1_bus1: sd1-bus-width1 { + rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>; + }; - sd1_bus4: sd1-bus-width4 { - rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>, - <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>; - }; + sd1_bus4: sd1-bus-width4 { + rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>, + <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>; }; }; }; }; + +&global_timer { + interrupts = <GIC_PPI 11 0xf04>; +}; + +&local_timer { + interrupts = <GIC_PPI 13 0xf04>; +}; + +&i2c0 { + compatible = "rockchip,rk3188-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; +}; + +&i2c1 { + compatible = "rockchip,rk3188-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; +}; + +&i2c2 { + compatible = "rockchip,rk3188-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; +}; + +&i2c3 { + compatible = "rockchip,rk3188-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; +}; + +&i2c4 { + compatible = "rockchip,rk3188-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_xfer>; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_out>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_out>; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_out>; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_out>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>; +}; + +&wdt { + compatible = "rockchip,rk3188-wdt", "snps,dw-wdt"; +}; diff --git a/dts/src/arm/rk3288-evb-act8846.dts b/dts/src/arm/rk3288-evb-act8846.dts new file mode 100644 index 0000000000..7d59ff4de4 --- /dev/null +++ b/dts/src/arm/rk3288-evb-act8846.dts @@ -0,0 +1,134 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "rk3288-evb.dtsi" + +/ { + compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288"; +}; + +&i2c0 { + hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + + #clock-cells = <0>; + clock-output-names = "xin32k"; + }; + + act8846: act8846@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + status = "okay"; + + regulators { + vcc_ddr: REG1 { + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_io: REG2 { + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_log: REG3 { + regulator-name = "VDD_LOG"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_20: REG4 { + regulator-name = "VCC_20"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + vccio_sd: REG5 { + regulator-name = "VCCIO_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd10_lcd: REG6 { + regulator-name = "VDD10_LCD"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcca_codec: REG7 { + regulator-name = "VCCA_CODEC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcca_tp: REG8 { + regulator-name = "VCCA_TP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccio_pmu: REG9 { + regulator-name = "VCCIO_PMU"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_10: REG10 { + regulator-name = "VDD_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_18: REG11 { + regulator-name = "VCC_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc18_lcd: REG12 { + regulator-name = "VCC18_LCD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/dts/src/arm/rk3288-evb-rk808.dts b/dts/src/arm/rk3288-evb-rk808.dts new file mode 100644 index 0000000000..9a88b6c663 --- /dev/null +++ b/dts/src/arm/rk3288-evb-rk808.dts @@ -0,0 +1,18 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "rk3288-evb.dtsi" + +/ { + compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; +}; diff --git a/dts/src/arm/rk3288-evb.dtsi b/dts/src/arm/rk3288-evb.dtsi new file mode 100644 index 0000000000..4f572093c8 --- /dev/null +++ b/dts/src/arm/rk3288-evb.dtsi @@ -0,0 +1,96 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "rk3288.dtsi" + +/ { + memory { + reg = <0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + button@0 { + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + linux,code = <116>; + label = "GPIO Key Power"; + linux,input-type = <1>; + gpio-key,wakeup = <1>; + debounce-interval = <100>; + }; + }; + + /* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */ + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&pinctrl { + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&usb_host0_ehci { + status = "okay"; +}; diff --git a/dts/src/arm/rk3288.dtsi b/dts/src/arm/rk3288.dtsi new file mode 100644 index 0000000000..5950b0a532 --- /dev/null +++ b/dts/src/arm/rk3288.dtsi @@ -0,0 +1,595 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/clock/rk3288-cru.h> +#include "skeleton.dtsi" + +/ { + compatible = "rockchip,rk3288"; + + interrupt-parent = <&gic>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a12"; + reg = <0x500>; + }; + cpu@501 { + device_type = "cpu"; + compatible = "arm,cortex-a12"; + reg = <0x501>; + }; + cpu@502 { + device_type = "cpu"; + compatible = "arm,cortex-a12"; + reg = <0x502>; + }; + cpu@503 { + device_type = "cpu"; + compatible = "arm,cortex-a12"; + reg = <0x503>; + }; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clock-frequency = <24000000>; + }; + + i2c1: i2c@ff140000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0xff140000 0x1000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + status = "disabled"; + }; + + i2c3: i2c@ff150000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0xff150000 0x1000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; + status = "disabled"; + }; + + i2c4: i2c@ff160000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0xff160000 0x1000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C4>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_xfer>; + status = "disabled"; + }; + + i2c5: i2c@ff170000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0xff170000 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C5>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_xfer>; + status = "disabled"; + }; + + uart0: serial@ff180000 { + compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; + reg = <0xff180000 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + status = "disabled"; + }; + + uart1: serial@ff190000 { + compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; + reg = <0xff190000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; + status = "disabled"; + }; + + uart2: serial@ff690000 { + compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; + reg = <0xff690000 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; + status = "disabled"; + }; + + uart3: serial@ff1b0000 { + compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; + reg = <0xff1b0000 0x100>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>; + status = "disabled"; + }; + + uart4: serial@ff1c0000 { + compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; + reg = <0xff1c0000 0x100>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer>; + status = "disabled"; + }; + + usb_host0_ehci: usb@ff500000 { + compatible = "generic-ehci"; + reg = <0xff500000 0x100>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_USBHOST0>; + clock-names = "usbhost"; + status = "disabled"; + }; + + /* NOTE: ohci@ff520000 doesn't actually work on hardware */ + + usb_hsic: usb@ff5c0000 { + compatible = "generic-ehci"; + reg = <0xff5c0000 0x100>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_HSIC>; + clock-names = "usbhost"; + status = "disabled"; + }; + + i2c0: i2c@ff650000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0xff650000 0x1000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + status = "disabled"; + }; + + i2c2: i2c@ff660000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0xff660000 0x1000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + status = "disabled"; + }; + + pmu: power-management@ff730000 { + compatible = "rockchip,rk3288-pmu", "syscon"; + reg = <0xff730000 0x100>; + }; + + sgrf: syscon@ff740000 { + compatible = "rockchip,rk3288-sgrf", "syscon"; + reg = <0xff740000 0x1000>; + }; + + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3288-cru"; + reg = <0xff760000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + grf: syscon@ff770000 { + compatible = "rockchip,rk3288-grf", "syscon"; + reg = <0xff770000 0x1000>; + }; + + wdt: watchdog@ff800000 { + compatible = "rockchip,rk3288-wdt", "snps,dw-wdt"; + reg = <0xff800000 0x100>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0xffc01000 0x1000>, + <0xffc02000 0x1000>, + <0xffc04000 0x2000>, + <0xffc06000 0x2000>; + interrupts = <GIC_PPI 9 0xf04>; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3288-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmu>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@ff750000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff750000 0x100>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO0>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@ff780000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff780000 0x100>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@ff790000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff790000 0x100>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@ff7a0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff7a0000 0x100>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio4@ff7b0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff7b0000 0x100>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO4>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio5@ff7c0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff7c0000 0x100>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO5>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio6@ff7d0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff7d0000 0x100>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO6>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio7@ff7e0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff7e0000 0x100>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO7>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio8: gpio8@ff7f0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff7f0000 0x100>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO8>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>, + <0 16 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <8 4 RK_FUNC_1 &pcfg_pull_none>, + <8 5 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = <6 9 RK_FUNC_1 &pcfg_pull_none>, + <6 10 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <2 16 RK_FUNC_1 &pcfg_pull_none>, + <2 17 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c4 { + i2c4_xfer: i2c4-xfer { + rockchip,pins = <7 17 RK_FUNC_1 &pcfg_pull_none>, + <7 18 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c5 { + i2c5_xfer: i2c5-xfer { + rockchip,pins = <7 19 RK_FUNC_1 &pcfg_pull_none>, + <7 20 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdmmc_cd: sdmcc-cd { + rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>, + <6 17 RK_FUNC_1 &pcfg_pull_up>, + <6 18 RK_FUNC_1 &pcfg_pull_up>, + <6 19 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_pwr: emmc-pwr { + rockchip,pins = <3 9 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_bus1: emmc-bus1 { + rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_bus4: emmc-bus4 { + rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>, + <3 1 RK_FUNC_2 &pcfg_pull_up>, + <3 2 RK_FUNC_2 &pcfg_pull_up>, + <3 3 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>, + <3 1 RK_FUNC_2 &pcfg_pull_up>, + <3 2 RK_FUNC_2 &pcfg_pull_up>, + <3 3 RK_FUNC_2 &pcfg_pull_up>, + <3 4 RK_FUNC_2 &pcfg_pull_up>, + <3 5 RK_FUNC_2 &pcfg_pull_up>, + <3 6 RK_FUNC_2 &pcfg_pull_up>, + <3 7 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>, + <4 17 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <4 19 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <5 8 RK_FUNC_1 &pcfg_pull_up>, + <5 9 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <5 11 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <7 22 RK_FUNC_1 &pcfg_pull_up>, + <7 23 RK_FUNC_1 &pcfg_pull_none>; + }; + /* no rts / cts for uart2 */ + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = <7 7 RK_FUNC_1 &pcfg_pull_up>, + <7 8 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart3_cts: uart3-cts { + rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart3_rts: uart3-rts { + rockchip,pins = <7 10 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart4 { + uart4_xfer: uart4-xfer { + rockchip,pins = <5 12 3 &pcfg_pull_up>, + <5 13 3 &pcfg_pull_none>; + }; + + uart4_cts: uart4-cts { + rockchip,pins = <5 14 3 &pcfg_pull_none>; + }; + + uart4_rts: uart4-rts { + rockchip,pins = <5 15 3 &pcfg_pull_none>; + }; + }; + }; +}; diff --git a/dts/src/arm/rk3xxx.dtsi b/dts/src/arm/rk3xxx.dtsi index 2adf1cc9e8..8caf85d839 100644 --- a/dts/src/arm/rk3xxx.dtsi +++ b/dts/src/arm/rk3xxx.dtsi @@ -20,120 +20,248 @@ / { interrupt-parent = <&gic>; - soc { + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + clock-output-names = "xin24m"; + }; + + L2: l2-cache-controller@10138000 { + compatible = "arm,pl310-cache"; + reg = <0x10138000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + scu@1013c000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x1013c000 0x100>; + }; + + global_timer: global-timer@1013c200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x1013c200 0x20>; + interrupts = <GIC_PPI 11 0x304>; + clocks = <&cru CORE_PERI>; + }; + + local_timer: local-timer@1013c600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x1013c600 0x20>; + interrupts = <GIC_PPI 13 0x304>; + clocks = <&cru CORE_PERI>; + }; + + gic: interrupt-controller@1013d000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x1013d000 0x1000>, + <0x1013c100 0x0100>; + }; + + uart0: serial@10124000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10124000 0x400>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + status = "disabled"; + }; + + uart1: serial@10126000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10126000 0x400>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + status = "disabled"; + }; + + mmc0: dwmmc@10214000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x10214000 0x1000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - - scu@1013c000 { - compatible = "arm,cortex-a9-scu"; - reg = <0x1013c000 0x100>; - }; - - pmu: pmu@20004000 { - compatible = "rockchip,rk3066-pmu", "syscon"; - reg = <0x20004000 0x100>; - }; - - grf: grf@20008000 { - compatible = "syscon"; - reg = <0x20008000 0x200>; - }; - - gic: interrupt-controller@1013d000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x1013d000 0x1000>, - <0x1013c100 0x0100>; - }; - - L2: l2-cache-controller@10138000 { - compatible = "arm,pl310-cache"; - reg = <0x10138000 0x1000>; - cache-unified; - cache-level = <2>; - }; - - global-timer@1013c200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x1013c200 0x20>; - interrupts = <GIC_PPI 11 0x304>; - clocks = <&dummy150m>; - }; - - local-timer@1013c600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x1013c600 0x20>; - interrupts = <GIC_PPI 13 0x304>; - clocks = <&dummy150m>; - }; - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 8>; - status = "disabled"; - }; - - uart1: serial@10126000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10126000 0x400>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 10>; - status = "disabled"; - }; - - uart2: serial@20064000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20064000 0x400>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 12>; - status = "disabled"; - }; - - uart3: serial@20068000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20068000 0x400>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 14>; - status = "disabled"; - }; - - dwmmc@10214000 { - compatible = "rockchip,rk2928-dw-mshc"; - reg = <0x10214000 0x1000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - clocks = <&clk_gates5 10>, <&clk_gates2 11>; - clock-names = "biu", "ciu"; - - status = "disabled"; - }; - - dwmmc@10218000 { - compatible = "rockchip,rk2928-dw-mshc"; - reg = <0x10218000 0x1000>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - #address-cells = <1>; - #size-cells = <0>; - - clocks = <&clk_gates5 11>, <&clk_gates2 13>; - clock-names = "biu", "ciu"; - - status = "disabled"; - }; + #size-cells = <0>; + + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + + mmc1: dwmmc@10218000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x10218000 0x1000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + + pmu: pmu@20004000 { + compatible = "rockchip,rk3066-pmu", "syscon"; + reg = <0x20004000 0x100>; + }; + + grf: grf@20008000 { + compatible = "syscon"; + reg = <0x20008000 0x200>; + }; + + i2c0: i2c@2002d000 { + compatible = "rockchip,rk3066-i2c"; + reg = <0x2002d000 0x1000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + rockchip,grf = <&grf>; + rockchip,bus-index = <0>; + + clock-names = "i2c"; + clocks = <&cru PCLK_I2C0>; + + status = "disabled"; + }; + + i2c1: i2c@2002f000 { + compatible = "rockchip,rk3066-i2c"; + reg = <0x2002f000 0x1000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + rockchip,grf = <&grf>; + + clocks = <&cru PCLK_I2C1>; + clock-names = "i2c"; + + status = "disabled"; + }; + + pwm0: pwm@20030000 { + compatible = "rockchip,rk2928-pwm"; + reg = <0x20030000 0x10>; + #pwm-cells = <2>; + clocks = <&cru PCLK_PWM01>; + status = "disabled"; + }; + + pwm1: pwm@20030010 { + compatible = "rockchip,rk2928-pwm"; + reg = <0x20030010 0x10>; + #pwm-cells = <2>; + clocks = <&cru PCLK_PWM01>; + status = "disabled"; + }; + + wdt: watchdog@2004c000 { + compatible = "snps,dw-wdt"; + reg = <0x2004c000 0x100>; + clocks = <&cru PCLK_WDT>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pwm2: pwm@20050020 { + compatible = "rockchip,rk2928-pwm"; + reg = <0x20050020 0x10>; + #pwm-cells = <2>; + clocks = <&cru PCLK_PWM23>; + status = "disabled"; + }; + + pwm3: pwm@20050030 { + compatible = "rockchip,rk2928-pwm"; + reg = <0x20050030 0x10>; + #pwm-cells = <2>; + clocks = <&cru PCLK_PWM23>; + status = "disabled"; + }; + + i2c2: i2c@20056000 { + compatible = "rockchip,rk3066-i2c"; + reg = <0x20056000 0x1000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + rockchip,grf = <&grf>; + + clocks = <&cru PCLK_I2C2>; + clock-names = "i2c"; + + status = "disabled"; + }; + + i2c3: i2c@2005a000 { + compatible = "rockchip,rk3066-i2c"; + reg = <0x2005a000 0x1000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + rockchip,grf = <&grf>; + + clocks = <&cru PCLK_I2C3>; + clock-names = "i2c"; + + status = "disabled"; + }; + + i2c4: i2c@2005e000 { + compatible = "rockchip,rk3066-i2c"; + reg = <0x2005e000 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + rockchip,grf = <&grf>; + + clocks = <&cru PCLK_I2C4>; + clock-names = "i2c"; + + status = "disabled"; + }; + + uart2: serial@20064000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20064000 0x400>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + status = "disabled"; + }; + + uart3: serial@20068000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20068000 0x400>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + status = "disabled"; }; }; diff --git a/dts/src/arm/s3c2416.dtsi b/dts/src/arm/s3c2416.dtsi index 955e4a4f8c..30b8f7e474 100644 --- a/dts/src/arm/s3c2416.dtsi +++ b/dts/src/arm/s3c2416.dtsi @@ -16,6 +16,10 @@ model = "Samsung S3C2416 SoC"; compatible = "samsung,s3c2416"; + aliases { + serial3 = &uart3; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -68,7 +72,7 @@ <&clocks SCLK_UART>; }; - serial@5000C000 { + uart3: serial@5000C000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; diff --git a/dts/src/arm/s3c24xx.dtsi b/dts/src/arm/s3c24xx.dtsi index 2d1d7dc941..5ed43b857c 100644 --- a/dts/src/arm/s3c24xx.dtsi +++ b/dts/src/arm/s3c24xx.dtsi @@ -16,6 +16,9 @@ aliases { pinctrl0 = &pinctrl_0; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; }; intc:interrupt-controller@4a000000 { @@ -46,21 +49,21 @@ #pwm-cells = <4>; }; - serial@50000000 { + uart0: serial@50000000 { compatible = "samsung,s3c2410-uart"; reg = <0x50000000 0x4000>; interrupts = <1 28 0 4>, <1 28 1 4>; status = "disabled"; }; - serial@50004000 { + uart1: serial@50004000 { compatible = "samsung,s3c2410-uart"; reg = <0x50004000 0x4000>; interrupts = <1 23 3 4>, <1 23 4 4>; status = "disabled"; }; - serial@50008000 { + uart2: serial@50008000 { compatible = "samsung,s3c2410-uart"; reg = <0x50008000 0x4000>; interrupts = <1 15 6 4>, <1 15 7 4>; diff --git a/dts/src/arm/s3c64xx.dtsi b/dts/src/arm/s3c64xx.dtsi index 4e3be4d349..ff5bdaac98 100644 --- a/dts/src/arm/s3c64xx.dtsi +++ b/dts/src/arm/s3c64xx.dtsi @@ -23,6 +23,10 @@ aliases { i2c0 = &i2c0; pinctrl0 = &pinctrl0; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; }; cpus { diff --git a/dts/src/arm/s5pv210-aquila.dts b/dts/src/arm/s5pv210-aquila.dts new file mode 100644 index 0000000000..aa31b84a70 --- /dev/null +++ b/dts/src/arm/s5pv210-aquila.dts @@ -0,0 +1,392 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for Samsung Aquila board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "Samsung Aquila based on S5PC110"; + compatible = "samsung,aquila", "samsung,s5pv210"; + + aliases { + i2c3 = &i2c_pmic; + }; + + chosen { + bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p5 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x30000000 0x05000000 + 0x40000000 0x18000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vtf_reg: fixed-regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "V_TF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpios = <&mp05 4 0>; + enable-active-high; + }; + + pda_reg: fixed-regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + reg = <1>; + }; + + bat_reg: fixed-regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "V_BAT"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + reg = <2>; + }; + }; + + i2c_pmic: i2c-pmic { + compatible = "i2c-gpio"; + gpios = <&gpj4 0 0>, /* sda */ + <&gpj4 3 0>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>, + <&gph0 4 0>; + max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VCC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VCC_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC+VCAM_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_IO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "CAM_ISP_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "CAM_A_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "CAM_CIF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "CAM_8M_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VARM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VINT_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "CAM_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vichg_reg: ENVICHG { + regulator-name = "VICHG"; + }; + + safeout1_reg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-always-on; + }; + + safeout2_reg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&gph2 6 1>; + linux,code = <KEY_POWER>; + label = "power"; + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&keypad { + linux,input-no-autorepeat; + linux,input-wakeup; + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, + <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <1>; + linux,code = <KEY_CONNECT>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <2>; + linux,code = <KEY_BACK>; + }; + + key_3 { + keypad,row = <1>; + keypad,column = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + key_4 { + keypad,row = <1>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEUP>; + }; + + key_5 { + keypad,row = <2>; + keypad,column = <1>; + linux,code = <KEY_CAMERA>; + }; + + key_6 { + keypad,row = <2>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + non-removable; + status = "okay"; + vmmc-supply = <&ldo5_reg>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; + pinctrl-names = "default"; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gph3 4 1>; + vmmc-supply = <&vtf_reg>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &t_flash_detect>; + pinctrl-names = "default"; + status = "okay"; +}; + +&onenand { + status = "okay"; +}; + +&hsotg { + vusb_a-supply = <&ldo3_reg>; + vusb_d-supply = <&ldo8_reg>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <0>; + hactive = <800>; + vactive = <480>; + hfront-porch = <16>; + hback-porch = <16>; + hsync-len = <2>; + vback-porch = <3>; + vfront-porch = <28>; + vsync-len = <1>; + }; + }; +}; + +&pinctrl0 { + t_flash_detect: t-flash-detect { + samsung,pins = "gph3-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + }; +}; diff --git a/dts/src/arm/s5pv210-goni.dts b/dts/src/arm/s5pv210-goni.dts new file mode 100644 index 0000000000..6387c77a6f --- /dev/null +++ b/dts/src/arm/s5pv210-goni.dts @@ -0,0 +1,449 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for Samsung Goni board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "Samsung Goni based on S5PC110"; + compatible = "samsung,goni", "samsung,s5pv210"; + + aliases { + i2c3 = &i2c_pmic; + }; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x30000000 0x05000000 + 0x40000000 0x10000000 + 0x50000000 0x08000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vtf_reg: fixed-regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "V_TF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + reg = <0>; + gpios = <&mp05 4 0>; + enable-active-high; + }; + + pda_reg: fixed-regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + reg = <1>; + }; + + bat_reg: fixed-regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "V_BAT"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + reg = <2>; + }; + + tsp_reg: fixed-regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "TSP_VDD"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + reg = <3>; + gpios = <&gpj1 3 0>; + enable-active-high; + }; + }; + + i2c_pmic: i2c-pmic { + compatible = "i2c-gpio"; + gpios = <&gpj4 0 0>, /* sda */ + <&gpj4 3 0>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>, + <&gph0 4 0>; + max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "VCC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VLCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC+VCAM_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_IO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo12_reg: LDO12 { + regulator-name = "CAM_ISP_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo13_reg: LDO13 { + regulator-name = "CAM_A_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "CAM_CIF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo17_reg: LDO17 { + regulator-name = "CAM_8M_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VARM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + buck2_reg: BUCK2 { + regulator-name = "VINT_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "CAM_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&gph2 6 1>; + linux,code = <KEY_POWER>; + label = "power"; + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&keypad { + linux,input-no-autorepeat; + linux,input-wakeup; + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, + <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <1>; + linux,code = <KEY_CONNECT>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <2>; + linux,code = <KEY_BACK>; + }; + + key_3 { + keypad,row = <1>; + keypad,column = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + key_4 { + keypad,row = <1>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEUP>; + }; + + key_5 { + keypad,row = <2>; + keypad,column = <1>; + linux,code = <KEY_CAMERA>; + }; + + key_6 { + keypad,row = <2>; + keypad,column = <2>; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + non-removable; + vmmc-supply = <&ldo5_reg>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gph3 4 1>; + vmmc-supply = <&vtf_reg>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hsotg { + vusb_a-supply = <&ldo3_reg>; + vusb_d-supply = <&ldo8_reg>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&i2c2 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; + samsung,i2c-slave-addr = <0x10>; + status = "okay"; + + tsp@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpj0>; + interrupts = <5 2>; + + atmel,x-line = <17>; + atmel,y-line = <11>; + atmel,x-size = <800>; + atmel,y-size = <480>; + atmel,burst-length = <0x21>; + atmel,threshold = <0x28>; + atmel,orientation = <1>; + + vdd-supply = <&tsp_reg>; + }; +}; + +&i2c0 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <100000>; + samsung,i2c-slave-addr = <0x10>; + status = "okay"; + + noon010pc30: sensor@30 { + compatible = "siliconfile,noon010pc30"; + reg = <0x30>; + vddio-supply = <&ldo11_reg>; + vdda-supply = <&ldo13_reg>; + vdd_core-supply = <&ldo14_reg>; + + clock-frequency = <16000000>; + clocks = <&clock_cam 0>; + clock-names = "mclk"; + nreset-gpios = <&gpb 2 0>; + nstby-gpios = <&gpb 0 0>; + + port { + noon010pc30_ep: endpoint { + remote-endpoint = <&fimc0_ep>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <1>; + pclk-sample = <1>; + }; + }; + }; +}; + +&camera { + pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>; + pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>; + pinctrl-names = "default", "idle"; + + parallel-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* camera A input */ + port@1 { + reg = <1>; + fimc0_ep: endpoint { + remote-endpoint = <&noon010pc30_ep>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + }; + }; + }; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + /* 480x800@55Hz */ + clock-frequency = <23439570>; + hactive = <480>; + hfront-porch = <16>; + hback-porch = <16>; + hsync-len = <2>; + vactive = <800>; + vback-porch = <2>; + vfront-porch = <28>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <0>; + }; + }; +}; + +&onenand { + status = "okay"; +}; diff --git a/dts/src/arm/s5pv210-pinctrl.dtsi b/dts/src/arm/s5pv210-pinctrl.dtsi new file mode 100644 index 0000000000..8c714088e3 --- /dev/null +++ b/dts/src/arm/s5pv210-pinctrl.dtsi @@ -0,0 +1,839 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&pinctrl0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj2: gpj2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj3: gpj3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj4: gpj4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpgi: gpgi { + gpio-controller; + #gpio-cells = <2>; + }; + + mp01: mp01 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp02: mp02 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp03: mp03 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp04: mp04 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp05: mp05 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp06: mp06 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp07: mp07 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + interrupt-controller; + interrupt-parent = <&vic0>; + interrupts = <0>, <1>, <2>, <3>, + <4>, <5>, <6>, <7>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + interrupt-controller; + interrupt-parent = <&vic0>; + interrupts = <8>, <9>, <10>, <11>, + <12>, <13>, <14>, <15>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gph2: gph2 { + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gph3: gph3 { + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart_audio: uart-audio { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3", + "gpi-4", "gpi-5", "gpi-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ac97_bus: ac97-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpc1-0", "gpc1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4"; + samsung,pin-function = <5>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpd1-4", "gpd1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row0: keypad-row-0 { + samsung,pins = "gph3-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row1: keypad-row-1 { + samsung,pins = "gph3-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row2: keypad-row-2 { + samsung,pins = "gph3-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row3: keypad-row-3 { + samsung,pins = "gph3-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row4: keypad-row-4 { + samsung,pins = "gph3-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row5: keypad-row-5 { + samsung,pins = "gph3-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row6: keypad-row-6 { + samsung,pins = "gph3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row7: keypad-row-7 { + samsung,pins = "gph3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col0: keypad-col-0 { + samsung,pins = "gph2-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col1: keypad-col-1 { + samsung,pins = "gph2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col2: keypad-col-2 { + samsung,pins = "gph2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col3: keypad-col-3 { + samsung,pins = "gph2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col4: keypad-col-4 { + samsung,pins = "gph2-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col5: keypad-col-5 { + samsung,pins = "gph2-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col6: keypad-col-6 { + samsung,pins = "gph2-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col7: keypad-col-7 { + samsung,pins = "gph2-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpg0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpg0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpg0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpg0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpg1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpg1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpg1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpg1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpg2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpg2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpg2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpg2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd2_bus8: sd2-bus-width8 { + samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd3_clk: sd3-clk { + samsung,pins = "gpg3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cmd: sd3-cmd { + samsung,pins = "gpg3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cd: sd3-cd { + samsung,pins = "gpg3-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd3_bus1: sd3-bus-width1 { + samsung,pins = "gpg3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd3_bus4: sd3-bus-width4 { + samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + eint0: ext-int0 { + samsung,pins = "gph0-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint8: ext-int8 { + samsung,pins = "gph1-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint15: ext-int15 { + samsung,pins = "gph1-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint16: ext-int16 { + samsung,pins = "gph2-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint31: ext-int31 { + samsung,pins = "gph3-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_a_io: cam-port-a-io { + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", + "gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_a_clk_active: cam-port-a-clk-active { + samsung,pins = "gpe1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_a_clk_idle: cam-port-a-clk-idle { + samsung,pins = "gpe1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + cam_port_b_io: cam-port-b-io { + samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", + "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", + "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_b_clk_active: cam-port-b-clk-active { + samsung,pins = "gpj1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_b_clk_idle: cam-port-b-clk-idle { + samsung,pins = "gpj1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + lcd_ctrl: lcd-ctrl { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_sync: lcd-sync { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_clk: lcd-clk { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data24: lcd-data-width24 { + samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", + "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; diff --git a/dts/src/arm/s5pv210-smdkc110.dts b/dts/src/arm/s5pv210-smdkc110.dts new file mode 100644 index 0000000000..1eedab7ffe --- /dev/null +++ b/dts/src/arm/s5pv210-smdkc110.dts @@ -0,0 +1,78 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for YIC System SMDC110 board. + * + * NOTE: This file is completely based on original board file for mach-smdkc110 + * available in Linux 3.15 and intends to provide equivalent level of hardware + * support. Due to lack of hardware, _no_ testing has been performed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "YIC System SMDKC110 based on S5PC110"; + compatible = "yic,smdkc110", "samsung,s5pv210"; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x20000000>; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + audio-codec@1b { + compatible = "wlf,wm8580"; + reg = <0x1b>; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/dts/src/arm/s5pv210-smdkv210.dts b/dts/src/arm/s5pv210-smdkv210.dts new file mode 100644 index 0000000000..cb8521899e --- /dev/null +++ b/dts/src/arm/s5pv210-smdkv210.dts @@ -0,0 +1,238 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for YIC System SMDV210 board. + * + * NOTE: This file is completely based on original board file for mach-smdkv210 + * available in Linux 3.15 and intends to provide equivalent level of hardware + * support. Due to lack of hardware, _no_ testing has been performed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "YIC System SMDKV210 based on S5PV210"; + compatible = "yic,smdkv210", "samsung,s5pv210"; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x40000000>; + }; + + ethernet@18000000 { + compatible = "davicom,dm9000"; + reg = <0xA8000000 0x2 0xA8000002 0x2>; + interrupt-parent = <&gph1>; + interrupts = <1 4>; + local-mac-address = [00 00 de ad be ef]; + davicom,no-eeprom; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_out>; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&keypad { + linux,input-no-autorepeat; + linux,input-wakeup; + samsung,keypad-num-rows = <8>; + samsung,keypad-num-columns = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, + <&keypad_row3>, <&keypad_row4>, <&keypad_row5>, + <&keypad_row6>, <&keypad_row7>, + <&keypad_col0>, <&keypad_col1>, <&keypad_col2>, + <&keypad_col3>, <&keypad_col4>, <&keypad_col5>, + <&keypad_col6>, <&keypad_col7>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <3>; + linux,code = <KEY_1>; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <4>; + linux,code = <KEY_2>; + }; + + key_3 { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <KEY_3>; + }; + + key_4 { + keypad,row = <0>; + keypad,column = <6>; + linux,code = <KEY_4>; + }; + + key_5 { + keypad,row = <0 + >; + keypad,column = <7>; + linux,code = <KEY_5>; + }; + + key_6 { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <KEY_A>; + }; + key_7 { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <KEY_B>; + }; + + key_8 { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <KEY_C>; + }; + + key_9 { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <KEY_D>; + }; + + key_10 { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <KEY_E>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci1 { + bus-width = <4>; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci3 { + bus-width = <4>; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hsotg { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + + timing0: timing@0 { + /* 800x480@60Hz */ + clock-frequency = <24373920>; + hactive = <800>; + vactive = <480>; + hfront-porch = <8>; + hback-porch = <13>; + hsync-len = <3>; + vback-porch = <7>; + vfront-porch = <5>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; +}; + +&pwm { + samsung,pwm-outputs = <3>; +}; + +&i2c0 { + status = "okay"; + + audio-codec@1b { + compatible = "wlf,wm8580"; + reg = <0x1b>; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/dts/src/arm/s5pv210-torbreck.dts b/dts/src/arm/s5pv210-torbreck.dts new file mode 100644 index 0000000000..622599fd2c --- /dev/null +++ b/dts/src/arm/s5pv210-torbreck.dts @@ -0,0 +1,92 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Board device tree source for Torbreck board. + * + * NOTE: This file is completely based on original board file for mach-torbreck + * available in Linux 3.15 and intends to provide equivalent level of hardware + * support. Due to lack of hardware, _no_ testing has been performed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "s5pv210.dtsi" + +/ { + model = "aESOP Torbreck based on S5PV210"; + compatible = "aesop,torbreck", "samsung,s5pv210"; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x20000000>; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci1 { + bus-width = <4>; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci3 { + bus-width = <4>; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/dts/src/arm/s5pv210.dtsi b/dts/src/arm/s5pv210.dtsi new file mode 100644 index 0000000000..8344a0ee2b --- /dev/null +++ b/dts/src/arm/s5pv210.dtsi @@ -0,0 +1,633 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk <m.krawczuk@partner.samsung.com> + * Tomasz Figa <t.figa@samsung.com> + * + * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/s5pv210.h> +#include <dt-bindings/clock/s5pv210-audss.h> + +/ { + aliases { + csis0 = &csis0; + fimc0 = &fimc0; + fimc1 = &fimc1; + fimc2 = &fimc2; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2s0 = &i2s0; + i2s1 = &i2s1; + i2s2 = &i2s2; + pinctrl0 = &pinctrl0; + spi0 = &spi0; + spi1 = &spi1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + external-clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + xxti: oscillator@0 { + compatible = "fixed-clock"; + reg = <0>; + clock-frequency = <0>; + clock-output-names = "xxti"; + #clock-cells = <0>; + }; + + xusbxti: oscillator@1 { + compatible = "fixed-clock"; + reg = <1>; + clock-frequency = <0>; + clock-output-names = "xusbxti"; + #clock-cells = <0>; + }; + }; + + onenand: onenand@b0000000 { + compatible = "samsung,s5pv210-onenand"; + reg = <0xb0600000 0x2000>, + <0xb0000000 0x20000>, + <0xb0040000 0x20000>; + interrupt-parent = <&vic1>; + interrupts = <31>; + clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>; + clock-names = "bus", "onenand"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + chipid@e0000000 { + compatible = "samsung,s5pv210-chipid"; + reg = <0xe0000000 0x1000>; + }; + + clocks: clock-controller@e0100000 { + compatible = "samsung,s5pv210-clock", "simple-bus"; + reg = <0xe0100000 0x10000>; + clock-names = "xxti", "xusbxti"; + clocks = <&xxti>, <&xusbxti>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pmu_syscon: syscon@e0108000 { + compatible = "samsung-s5pv210-pmu", "syscon"; + reg = <0xe0108000 0x8000>; + }; + }; + + pinctrl0: pinctrl@e0200000 { + compatible = "samsung,s5pv210-pinctrl"; + reg = <0xe0200000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <30>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupts = <16>; + interrupt-parent = <&vic0>; + }; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + ranges; + + pdma0: dma@e0900000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xe0900000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <19>; + clocks = <&clocks CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: dma@e0a00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xe0a00000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <20>; + clocks = <&clocks CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + + spi0: spi@e1300000 { + compatible = "samsung,s5pv210-spi"; + reg = <0xe1300000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <15>; + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; + clocks = <&clocks SCLK_SPI0>, <&clocks CLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@e1400000 { + compatible = "samsung,s5pv210-spi"; + reg = <0xe1400000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <16>; + dmas = <&pdma1 7>, <&pdma1 6>; + dma-names = "tx", "rx"; + clocks = <&clocks SCLK_SPI1>, <&clocks CLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + keypad: keypad@e1600000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0xe1600000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <25>; + clocks = <&clocks CLK_KEYIF>; + clock-names = "keypad"; + status = "disabled"; + }; + + i2c0: i2c@e1800000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xe1800000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <14>; + clocks = <&clocks CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e1a00000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xe1a00000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <19>; + clocks = <&clocks CLK_I2C2>; + clock-names = "i2c"; + pinctrl-0 = <&i2c2_bus>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + audio-subsystem { + compatible = "samsung,s5pv210-audss", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clk_audss: clock-controller@eee10000 { + compatible = "samsung,s5pv210-audss-clock"; + reg = <0xeee10000 0x1000>; + clock-names = "hclk", "xxti", + "fout_epll", + "sclk_audio0"; + clocks = <&clocks DOUT_HCLKP>, <&xxti>, + <&clocks FOUT_EPLL>, + <&clocks SCLK_AUDIO0>; + #clock-cells = <1>; + }; + + i2s0: i2s@eee30000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0xeee30000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <16>; + dma-names = "rx", "tx", "tx-sec"; + dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; + clock-names = "iis", + "i2s_opclk0", + "i2s_opclk1"; + clocks = <&clk_audss CLK_I2S>, + <&clk_audss CLK_I2S>, + <&clk_audss CLK_DOUT_AUD_BUS>; + samsung,idma-addr = <0xc0010000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + }; + + i2s1: i2s@e2100000 { + compatible = "samsung,s3c6410-i2s"; + reg = <0xe2100000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <17>; + dma-names = "rx", "tx"; + dmas = <&pdma1 12>, <&pdma1 13>; + clock-names = "iis", "i2s_opclk0"; + clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s2: i2s@e2a00000 { + compatible = "samsung,s3c6410-i2s"; + reg = <0xe2a00000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <18>; + dma-names = "rx", "tx"; + dmas = <&pdma1 14>, <&pdma1 15>; + clock-names = "iis", "i2s_opclk0"; + clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + pwm: pwm@e2500000 { + compatible = "samsung,s5pc100-pwm"; + reg = <0xe2500000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <21>, <22>, <23>, <24>, <25>; + clock-names = "timers"; + clocks = <&clocks CLK_PWM>; + #pwm-cells = <3>; + }; + + watchdog: watchdog@e2700000 { + compatible = "samsung,s3c2410-wdt"; + reg = <0xe2700000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <26>; + clock-names = "watchdog"; + clocks = <&clocks CLK_WDT>; + }; + + rtc: rtc@e2800000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0xe2800000 0x100>; + interrupt-parent = <&vic0>; + interrupts = <28>, <29>; + clocks = <&clocks CLK_RTC>; + clock-names = "rtc"; + status = "disabled"; + }; + + uart0: serial@e2900000 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900000 0x400>; + interrupt-parent = <&vic1>; + interrupts = <10>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART0>, <&clocks CLK_UART0>, + <&clocks SCLK_UART0>; + status = "disabled"; + }; + + uart1: serial@e2900400 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900400 0x400>; + interrupt-parent = <&vic1>; + interrupts = <11>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART1>, <&clocks CLK_UART1>, + <&clocks SCLK_UART1>; + status = "disabled"; + }; + + uart2: serial@e2900800 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900800 0x400>; + interrupt-parent = <&vic1>; + interrupts = <12>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART2>, <&clocks CLK_UART2>, + <&clocks SCLK_UART2>; + status = "disabled"; + }; + + uart3: serial@e2900c00 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900c00 0x400>; + interrupt-parent = <&vic1>; + interrupts = <13>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART3>, <&clocks CLK_UART3>, + <&clocks SCLK_UART3>; + status = "disabled"; + }; + + sdhci0: sdhci@eb000000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb000000 0x100000>; + interrupt-parent = <&vic1>; + interrupts = <26>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks CLK_HSMMC0>, <&clocks CLK_HSMMC0>, + <&clocks SCLK_MMC0>; + status = "disabled"; + }; + + sdhci1: sdhci@eb100000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb100000 0x100000>; + interrupt-parent = <&vic1>; + interrupts = <27>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks CLK_HSMMC1>, <&clocks CLK_HSMMC1>, + <&clocks SCLK_MMC1>; + status = "disabled"; + }; + + sdhci2: sdhci@eb200000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb200000 0x100000>; + interrupt-parent = <&vic1>; + interrupts = <28>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks CLK_HSMMC2>, <&clocks CLK_HSMMC2>, + <&clocks SCLK_MMC2>; + status = "disabled"; + }; + + sdhci3: sdhci@eb300000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb300000 0x100000>; + interrupt-parent = <&vic3>; + interrupts = <2>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.3"; + clocks = <&clocks CLK_HSMMC3>, <&clocks CLK_HSMMC3>, + <&clocks SCLK_MMC3>; + status = "disabled"; + }; + + hsotg: hsotg@ec000000 { + compatible = "samsung,s3c6400-hsotg"; + reg = <0xec000000 0x20000>; + interrupt-parent = <&vic1>; + interrupts = <24>; + clocks = <&clocks CLK_USB_OTG>; + clock-names = "otg"; + phy-names = "usb2-phy"; + phys = <&usbphy 0>; + status = "disabled"; + }; + + usbphy: usbphy@ec100000 { + compatible = "samsung,s5pv210-usb2-phy"; + reg = <0xec100000 0x100>; + samsung,pmureg-phandle = <&pmu_syscon>; + clocks = <&clocks CLK_USB_OTG>, <&xusbxti>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + status = "disabled"; + }; + + ehci: ehci@ec200000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0xec200000 0x100>; + interrupts = <23>; + interrupt-parent = <&vic1>; + clocks = <&clocks CLK_USB_HOST>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + phys = <&usbphy 1>; + }; + }; + + ohci: ohci@ec300000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0xec300000 0x100>; + interrupts = <23>; + clocks = <&clocks CLK_USB_HOST>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + phys = <&usbphy 1>; + }; + }; + + mfc: codec@f1700000 { + compatible = "samsung,mfc-v5"; + reg = <0xf1700000 0x10000>; + interrupt-parent = <&vic2>; + interrupts = <14>; + clocks = <&clocks DOUT_MFC>, <&clocks CLK_MFC>; + clock-names = "sclk_mfc", "mfc"; + }; + + vic0: interrupt-controller@f2000000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2000000 0x1000>; + #interrupt-cells = <1>; + }; + + vic1: interrupt-controller@f2100000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2100000 0x1000>; + #interrupt-cells = <1>; + }; + + vic2: interrupt-controller@f2200000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2200000 0x1000>; + #interrupt-cells = <1>; + }; + + vic3: interrupt-controller@f2300000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2300000 0x1000>; + #interrupt-cells = <1>; + }; + + fimd: fimd@f8000000 { + compatible = "samsung,exynos4210-fimd"; + interrupt-parent = <&vic2>; + reg = <0xf8000000 0x20000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <0>, <1>, <2>; + clocks = <&clocks SCLK_FIMD>, <&clocks CLK_FIMD>; + clock-names = "sclk_fimd", "fimd"; + status = "disabled"; + }; + + g2d: g2d@fa000000 { + compatible = "samsung,s5pv210-g2d"; + reg = <0xfa000000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <9>; + clocks = <&clocks DOUT_G2D>, <&clocks CLK_G2D>; + clock-names = "sclk_fimg2d", "fimg2d"; + }; + + mdma1: mdma@fa200000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xfa200000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <18>; + clocks = <&clocks CLK_MDMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + i2c1: i2c@fab00000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xfab00000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <13>; + clocks = <&clocks CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + camera: camera { + compatible = "samsung,fimc", "simple-bus"; + pinctrl-names = "default"; + pinctrl-0 = <>; + clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>; + clock-names = "sclk_cam0", "sclk_cam1"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clock_cam: clock-controller { + #clock-cells = <1>; + }; + + csis0: csis@fa600000 { + compatible = "samsung,s5pv210-csis"; + reg = <0xfa600000 0x4000>; + interrupt-parent = <&vic2>; + interrupts = <29>; + clocks = <&clocks CLK_CSIS>, + <&clocks SCLK_CSIS>; + clock-names = "clk_csis", + "sclk_csis"; + bus-width = <4>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + fimc0: fimc@fb200000 { + compatible = "samsung,s5pv210-fimc"; + reg = <0xfb200000 0x1000>; + interrupts = <5>; + interrupt-parent = <&vic2>; + clocks = <&clocks CLK_FIMC0>, + <&clocks SCLK_FIMC0>; + clock-names = "fimc", + "sclk_fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; + }; + + fimc1: fimc@fb300000 { + compatible = "samsung,s5pv210-fimc"; + reg = <0xfb300000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <6>; + clocks = <&clocks CLK_FIMC1>, + <&clocks SCLK_FIMC1>; + clock-names = "fimc", + "sclk_fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; + }; + + fimc2: fimc@fb400000 { + compatible = "samsung,s5pv210-fimc"; + reg = <0xfb400000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <7>; + clocks = <&clocks CLK_FIMC2>, + <&clocks SCLK_FIMC2>; + clock-names = "fimc", + "sclk_fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,lcd-wb; + }; + }; + }; +}; + +#include "s5pv210-pinctrl.dtsi" diff --git a/dts/src/arm/sama5d3.dtsi b/dts/src/arm/sama5d3.dtsi index e0b15a6e88..45013b867c 100644 --- a/dts/src/arm/sama5d3.dtsi +++ b/dts/src/arm/sama5d3.dtsi @@ -58,19 +58,19 @@ reg = <0x20000000 0x8000000>; }; - slow_xtal: slow_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - main_xtal: main_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - clocks { adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/dts/src/arm/sama5d3_gmac.dtsi b/dts/src/arm/sama5d3_gmac.dtsi index a6cb050876..de5ed59fb4 100644 --- a/dts/src/arm/sama5d3_gmac.dtsi +++ b/dts/src/arm/sama5d3_gmac.dtsi @@ -74,7 +74,7 @@ }; macb0: ethernet@f0028000 { - compatible = "cdns,pc302-gem", "cdns,gem"; + compatible = "atmel,sama5d3-gem"; reg = <0xf0028000 0x100>; interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/dts/src/arm/sama5d3xcm.dtsi b/dts/src/arm/sama5d3xcm.dtsi index b0b1331c19..f7d8583eef 100644 --- a/dts/src/arm/sama5d3xcm.dtsi +++ b/dts/src/arm/sama5d3xcm.dtsi @@ -18,12 +18,14 @@ reg = <0x20000000 0x20000000>; }; - slow_xtal { - clock-frequency = <32768>; - }; + clocks { + slow_xtal { + clock-frequency = <32768>; + }; - main_xtal { - clock-frequency = <12000000>; + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/dts/src/arm/sama5d3xmb.dtsi b/dts/src/arm/sama5d3xmb.dtsi index 306eef0f97..b8c6f20e78 100644 --- a/dts/src/arm/sama5d3xmb.dtsi +++ b/dts/src/arm/sama5d3xmb.dtsi @@ -45,6 +45,8 @@ wm8904: wm8904@1a { compatible = "wm8904"; reg = <0x1a>; + clocks = <&pck0>; + clock-names = "mclk"; }; }; diff --git a/dts/src/arm/sh73a0-kzm9g-reference.dts b/dts/src/arm/sh73a0-kzm9g-reference.dts index a99171c8a7..18662aec2e 100644 --- a/dts/src/arm/sh73a0-kzm9g-reference.dts +++ b/dts/src/arm/sh73a0-kzm9g-reference.dts @@ -21,6 +21,10 @@ model = "KZM-A9-GT"; compatible = "renesas,kzm9g-reference", "renesas,sh73a0"; + aliases { + serial4 = &scifa4; + }; + cpus { cpu@0 { cpu0-supply = <&vdd_dvfs>; @@ -35,7 +39,7 @@ }; chosen { - bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw"; + bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw"; }; memory { @@ -276,9 +280,6 @@ }; &pfc { - pinctrl-0 = <&scifa4_pins>; - pinctrl-names = "default"; - i2c3_pins: i2c3 { renesas,groups = "i2c3_1"; renesas,function = "i2c3"; @@ -318,6 +319,13 @@ }; }; +&scifa4 { + pinctrl-0 = <&scifa4_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; diff --git a/dts/src/arm/sh73a0.dtsi b/dts/src/arm/sh73a0.dtsi index 5ecf552e1c..910b79079d 100644 --- a/dts/src/arm/sh73a0.dtsi +++ b/dts/src/arm/sh73a0.dtsi @@ -235,6 +235,78 @@ status = "disabled"; }; + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6c40000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6c50000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6c60000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6c70000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa4: serial@e6c80000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6c80000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa5: serial@e6cb0000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6cb0000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa6: serial@e6cc0000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6cc0000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa7: serial@e6cd0000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6cd0000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifb8: serial@e6c30000 { + compatible = "renesas,scifb-sh73a0", "renesas,scifb"; + reg = <0xe6c30000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + pfc: pfc@e6050000 { compatible = "renesas,pfc-sh73a0"; reg = <0xe6050000 0x8000>, diff --git a/dts/src/arm/socfpga.dtsi b/dts/src/arm/socfpga.dtsi index 4676f25e87..4d77ad690e 100644 --- a/dts/src/arm/socfpga.dtsi +++ b/dts/src/arm/socfpga.dtsi @@ -486,6 +486,8 @@ clock-names = "stmmaceth"; resets = <&rst EMAC0_RESET>; reset-names = "stmmaceth"; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; status = "disabled"; }; @@ -500,6 +502,8 @@ clock-names = "stmmaceth"; resets = <&rst EMAC1_RESET>; reset-names = "stmmaceth"; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; status = "disabled"; }; @@ -683,6 +687,7 @@ }; rst: rstmgr@ffd05000 { + #reset-cells = <1>; compatible = "altr,rst-mgr"; reg = <0xffd05000 0x1000>; }; diff --git a/dts/src/arm/spear1310-evb.dts b/dts/src/arm/spear1310-evb.dts index b56a801e42..d42c84b1df 100644 --- a/dts/src/arm/spear1310-evb.dts +++ b/dts/src/arm/spear1310-evb.dts @@ -106,6 +106,10 @@ status = "okay"; }; + miphy@eb800000 { + status = "okay"; + }; + cf@b2800000 { status = "okay"; }; diff --git a/dts/src/arm/spear1310.dtsi b/dts/src/arm/spear1310.dtsi index 122ae94076..fa5f2bb5f1 100644 --- a/dts/src/arm/spear1310.dtsi +++ b/dts/src/arm/spear1310.dtsi @@ -29,24 +29,111 @@ #gpio-cells = <2>; }; - ahci@b1000000 { + miphy0: miphy@eb800000 { + compatible = "st,spear1310-miphy"; + reg = <0xeb800000 0x4000>; + misc = <&misc>; + phy-id = <0>; + #phy-cells = <1>; + status = "disabled"; + }; + + miphy1: miphy@eb804000 { + compatible = "st,spear1310-miphy"; + reg = <0xeb804000 0x4000>; + misc = <&misc>; + phy-id = <1>; + #phy-cells = <1>; + status = "disabled"; + }; + + miphy2: miphy@eb808000 { + compatible = "st,spear1310-miphy"; + reg = <0xeb808000 0x4000>; + misc = <&misc>; + phy-id = <2>; + #phy-cells = <1>; + status = "disabled"; + }; + + ahci0: ahci@b1000000 { compatible = "snps,spear-ahci"; reg = <0xb1000000 0x10000>; interrupts = <0 68 0x4>; + phys = <&miphy0 0>; + phy-names = "sata-phy"; status = "disabled"; }; - ahci@b1800000 { + ahci1: ahci@b1800000 { compatible = "snps,spear-ahci"; reg = <0xb1800000 0x10000>; interrupts = <0 69 0x4>; + phys = <&miphy1 0>; + phy-names = "sata-phy"; status = "disabled"; }; - ahci@b4000000 { + ahci2: ahci@b4000000 { compatible = "snps,spear-ahci"; reg = <0xb4000000 0x10000>; interrupts = <0 70 0x4>; + phys = <&miphy2 0>; + phy-names = "sata-phy"; + status = "disabled"; + }; + + pcie0: pcie@b1000000 { + compatible = "st,spear1340-pcie", "snps,dw-pcie"; + reg = <0xb1000000 0x4000>; + interrupts = <0 68 0x4>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 0 68 0x4>; + num-lanes = <1>; + phys = <&miphy0 1>; + phy-names = "pcie-phy"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x00000800 0 0x80000000 0x80000000 0 0x00020000 /* configuration space */ + 0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ + status = "disabled"; + }; + + pcie1: pcie@b1800000 { + compatible = "st,spear1340-pcie", "snps,dw-pcie"; + reg = <0xb1800000 0x4000>; + interrupts = <0 69 0x4>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 0 69 0x4>; + num-lanes = <1>; + phys = <&miphy1 1>; + phy-names = "pcie-phy"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x00000800 0 0x90000000 0x90000000 0 0x00020000 /* configuration space */ + 0x81000000 0 0 0x90020000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */ + status = "disabled"; + }; + + pcie2: pcie@b4000000 { + compatible = "st,spear1340-pcie", "snps,dw-pcie"; + reg = <0xb4000000 0x4000>; + interrupts = <0 70 0x4>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 0 70 0x4>; + num-lanes = <1>; + phys = <&miphy2 1>; + phy-names = "pcie-phy"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x00000800 0 0xc0000000 0xc0000000 0 0x00020000 /* configuration space */ + 0x81000000 0 0 0xc0020000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ status = "disabled"; }; diff --git a/dts/src/arm/spear1340-evb.dts b/dts/src/arm/spear1340-evb.dts index d6c30ae0a8..b23e05ed1d 100644 --- a/dts/src/arm/spear1340-evb.dts +++ b/dts/src/arm/spear1340-evb.dts @@ -122,6 +122,10 @@ status = "okay"; }; + miphy@eb800000 { + status = "okay"; + }; + dma@ea800000 { status = "okay"; }; diff --git a/dts/src/arm/spear1340.dtsi b/dts/src/arm/spear1340.dtsi index 54d128d356..e71df0f2cb 100644 --- a/dts/src/arm/spear1340.dtsi +++ b/dts/src/arm/spear1340.dtsi @@ -31,10 +31,38 @@ status = "disabled"; }; - ahci@b1000000 { + miphy0: miphy@eb800000 { + compatible = "st,spear1340-miphy"; + reg = <0xeb800000 0x4000>; + misc = <&misc>; + #phy-cells = <1>; + status = "disabled"; + }; + + ahci0: ahci@b1000000 { compatible = "snps,spear-ahci"; reg = <0xb1000000 0x10000>; interrupts = <0 72 0x4>; + phys = <&miphy0 0>; + phy-names = "sata-phy"; + status = "disabled"; + }; + + pcie0: pcie@b1000000 { + compatible = "st,spear1340-pcie", "snps,dw-pcie"; + reg = <0xb1000000 0x4000>; + interrupts = <0 68 0x4>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 0 68 0x4>; + num-lanes = <1>; + phys = <&miphy0 1>; + phy-names = "pcie-phy"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x00000800 0 0x80000000 0x80000000 0 0x00020000 /* configuration space */ + 0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ status = "disabled"; }; diff --git a/dts/src/arm/spear13xx.dtsi b/dts/src/arm/spear13xx.dtsi index 4382547df5..a6eb5436d2 100644 --- a/dts/src/arm/spear13xx.dtsi +++ b/dts/src/arm/spear13xx.dtsi @@ -83,8 +83,8 @@ #size-cells = <1>; compatible = "simple-bus"; ranges = <0x50000000 0x50000000 0x10000000 - 0xb0000000 0xb0000000 0x10000000 - 0xd0000000 0xd0000000 0x02000000 + 0x80000000 0x80000000 0x20000000 + 0xb0000000 0xb0000000 0x22000000 0xd8000000 0xd8000000 0x01000000 0xe0000000 0xe0000000 0x10000000>; @@ -220,6 +220,11 @@ 0xd8000000 0xd8000000 0x01000000 0xe0000000 0xe0000000 0x10000000>; + misc: syscon@e0700000 { + compatible = "st,spear1340-misc", "syscon"; + reg = <0xe0700000 0x1000>; + }; + gpio0: gpio@e0600000 { compatible = "arm,pl061", "arm,primecell"; reg = <0xe0600000 0x1000>; diff --git a/dts/src/arm/ste-dbx5x0.dtsi b/dts/src/arm/ste-dbx5x0.dtsi index e41eedca3c..9d2323020d 100644 --- a/dts/src/arm/ste-dbx5x0.dtsi +++ b/dts/src/arm/ste-dbx5x0.dtsi @@ -875,6 +875,10 @@ reg = <0x80119000 0x1000>; interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */ + <&dma 41 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>; clock-names = "sdi", "apb_pclk"; @@ -901,6 +905,10 @@ reg = <0x80008000 0x1000>; interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */ + <&dma 43 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>; clock-names = "sdi", "apb_pclk"; @@ -929,6 +937,7 @@ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + /* This DMA channel only exist on DB8500 v1 */ dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */ dma-names = "tx"; @@ -962,6 +971,7 @@ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + /* This DMA channel only exist on DB8500 v2 */ dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */ dma-names = "rx"; diff --git a/dts/src/arm/ste-href-stuib.dtsi b/dts/src/arm/ste-href-stuib.dtsi index 1c3574435e..84d7c5d883 100644 --- a/dts/src/arm/ste-href-stuib.dtsi +++ b/dts/src/arm/ste-href-stuib.dtsi @@ -42,6 +42,8 @@ interrupts = <26 IRQ_TYPE_EDGE_FALLING>; interrupt-parent = <&gpio6>; interrupt-controller; + vcc-supply = <&db8500_vsmps2_reg>; + vio-supply = <&db8500_vsmps2_reg>; wakeup-source; st,autosleep-timeout = <1024>; diff --git a/dts/src/arm/ste-href-tvk1281618.dtsi b/dts/src/arm/ste-href-tvk1281618.dtsi index c405653209..18b65d1b14 100644 --- a/dts/src/arm/ste-href-tvk1281618.dtsi +++ b/dts/src/arm/ste-href-tvk1281618.dtsi @@ -88,6 +88,43 @@ }; }; }; + /* Sensors mounted on this board variant */ + i2c@80128000 { + lsm303dlh@18 { + /* Accelerometer */ + compatible = "st,lsm303dlh-accel"; + st,drdy-int-pin = <1>; + reg = <0x18>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_tvk_mode>; + }; + lsm303dlm@1e { + /* Magnetometer */ + compatible = "st,lsm303dlm-magn"; + reg = <0x1e>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&magneto_tvk_mode>; + }; + l3g4200d@68 { + /* Gyroscope */ + compatible = "st,l3g4200d-gyro"; + st,drdy-int-pin = <2>; + reg = <0x68>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + lsp001wm@5c { + /* Barometer/pressure sensor */ + compatible = "st,lps001wp-press"; + reg = <0x5c>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + }; pinctrl { /* Pull up this GPIO pin */ tc35893 { @@ -114,6 +151,28 @@ }; }; }; + accelerometer { + accel_tvk_mode: accel_tvk { + /* Accelerometer interrupt lines 1 & 2 */ + tvk_cfg { + ste,pins = "GPIO82_C1", "GPIO83_D3"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + magnetometer { + magneto_tvk_mode: magneto_tvk { + /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ + tvk_cfg1 { + ste,pins = "GPIO31_V3"; + ste,config = <&gpio_in_pu>; + }; + tvk_cfg2 { + ste,pins = "GPIO32_V2"; + ste,config = <&gpio_in_pd>; + }; + }; + }; }; }; }; diff --git a/dts/src/arm/ste-hrefv60plus.dtsi b/dts/src/arm/ste-hrefv60plus.dtsi index c2341061b9..bcc1f0c37f 100644 --- a/dts/src/arm/ste-hrefv60plus.dtsi +++ b/dts/src/arm/ste-hrefv60plus.dtsi @@ -35,8 +35,6 @@ */ pinctrl-names = "default"; pinctrl-0 = <&ipgpio_hrefv60_mode>, - <&accel_hrefv60_mode>, - <&magneto_hrefv60_mode>, <&etm_hrefv60_mode>, <&nahj_hrefv60_mode>, <&nfc_hrefv60_mode>, @@ -83,28 +81,6 @@ }; }; }; - accelerometer { - accel_hrefv60_mode: accel_hrefv60 { - /* Accelerometer interrupt lines 1 & 2 */ - hrefv60_cfg1 { - ste,pins = "GPIO82_C1", "GPIO83_D3"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - magnetometer { - magneto_hrefv60_mode: magneto_hrefv60 { - /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ - hrefv60_cfg1 { - ste,pins = "GPIO31_V3"; - ste,config = <&gpio_in_pu>; - }; - hrefv60_cfg2 { - ste,pins = "GPIO32_V2"; - ste,config = <&gpio_in_pd>; - }; - }; - }; etm { /* * Drive D19-D23 for the ETM PTM trace interface low, diff --git a/dts/src/arm/ste-snowball.dts b/dts/src/arm/ste-snowball.dts index 474ef83229..4a2000c620 100644 --- a/dts/src/arm/ste-snowball.dts +++ b/dts/src/arm/ste-snowball.dts @@ -241,6 +241,40 @@ pinctrl-names = "default","sleep"; pinctrl-0 = <&i2c2_default_mode>; pinctrl-1 = <&i2c2_sleep_mode>; + lsm303dlh@18 { + /* Accelerometer */ + compatible = "st,lsm303dlh-accel"; + st,drdy-int-pin = <1>; + reg = <0x18>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_snowball_mode>; + }; + lsm303dlm@1e { + /* Magnetometer */ + compatible = "st,lsm303dlm-magn"; + reg = <0x1e>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&magneto_snowball_mode>; + }; + l3g4200d@68 { + /* Gyroscope */ + compatible = "st,l3g4200d-gyro"; + st,drdy-int-pin = <2>; + reg = <0x68>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + lsp001wm@5c { + /* Barometer/pressure sensor */ + compatible = "st,lps001wp-press"; + reg = <0x5c>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; }; i2c@80110000 { @@ -361,9 +395,7 @@ * can be moved over to being controlled by respective device. */ pinctrl-names = "default"; - pinctrl-0 = <&accel_snowball_mode>, - <&magneto_snowball_mode>, - <&gbf_snowball_mode>, + pinctrl-0 = <&gbf_snowball_mode>, <&wlan_snowball_mode>; ethernet { diff --git a/dts/src/arm/sun4i-a10-a1000.dts b/dts/src/arm/sun4i-a10-a1000.dts index 0b97c071dd..9e99ade35e 100644 --- a/dts/src/arm/sun4i-a10-a1000.dts +++ b/dts/src/arm/sun4i-a10-a1000.dts @@ -88,6 +88,12 @@ }; }; + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -98,6 +104,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; diff --git a/dts/src/arm/sun4i-a10-ba10-tvbox.dts b/dts/src/arm/sun4i-a10-ba10-tvbox.dts new file mode 100644 index 0000000000..1763cc7ec0 --- /dev/null +++ b/dts/src/arm/sun4i-a10-ba10-tvbox.dts @@ -0,0 +1,110 @@ +/* + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun4i-a10.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "BA10 tvbox"; + compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10"; + + soc@01c00000 { + emac: ethernet@01c0b000 { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; + }; + + mdio@01c0b080 { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + usb2_vbus_pin_a: usb2_vbus_pin@0 { + allwinner,pins = "PH12"; + }; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + gpio = <&pio 7 12 0>; + status = "okay"; + }; +}; diff --git a/dts/src/arm/sun4i-a10-cubieboard.dts b/dts/src/arm/sun4i-a10-cubieboard.dts index c200eacc66..3ce56bfbc0 100644 --- a/dts/src/arm/sun4i-a10-cubieboard.dts +++ b/dts/src/arm/sun4i-a10-cubieboard.dts @@ -80,6 +80,12 @@ }; }; + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -90,6 +96,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; }; i2c1: i2c@01c2b000 { diff --git a/dts/src/arm/sun4i-a10-hackberry.dts b/dts/src/arm/sun4i-a10-hackberry.dts index 547fadcb98..891ea446ab 100644 --- a/dts/src/arm/sun4i-a10-hackberry.dts +++ b/dts/src/arm/sun4i-a10-hackberry.dts @@ -87,11 +87,32 @@ }; }; + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; }; reg_emac_3v3: emac-3v3 { diff --git a/dts/src/arm/sun4i-a10-inet97fv2.dts b/dts/src/arm/sun4i-a10-inet97fv2.dts index f13723e18b..6b0c37812a 100644 --- a/dts/src/arm/sun4i-a10-inet97fv2.dts +++ b/dts/src/arm/sun4i-a10-inet97fv2.dts @@ -40,12 +40,6 @@ status = "okay"; }; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; @@ -67,6 +61,21 @@ ohci1: usb@01c1c400 { status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; }; reg_usb1_vbus: usb1-vbus { diff --git a/dts/src/arm/sun4i-a10-mini-xplus.dts b/dts/src/arm/sun4i-a10-mini-xplus.dts index c01cea50cf..b9ecce60f2 100644 --- a/dts/src/arm/sun4i-a10-mini-xplus.dts +++ b/dts/src/arm/sun4i-a10-mini-xplus.dts @@ -52,11 +52,39 @@ status = "okay"; }; + pinctrl@01c20800 { + ir0_pins_a: ir0@0 { + /* The ir receiver is not always populated */ + allwinner,pull = <1>; + }; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; }; reg_usb1_vbus: usb1-vbus { diff --git a/dts/src/arm/sun4i-a10-olinuxino-lime.dts b/dts/src/arm/sun4i-a10-olinuxino-lime.dts index d46a7dbece..d046d568f5 100644 --- a/dts/src/arm/sun4i-a10-olinuxino-lime.dts +++ b/dts/src/arm/sun4i-a10-olinuxino-lime.dts @@ -91,6 +91,21 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; }; leds { diff --git a/dts/src/arm/sun4i-a10-pcduino.dts b/dts/src/arm/sun4i-a10-pcduino.dts index fb03bccb78..6675bcd786 100644 --- a/dts/src/arm/sun4i-a10-pcduino.dts +++ b/dts/src/arm/sun4i-a10-pcduino.dts @@ -76,6 +76,15 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; diff --git a/dts/src/arm/sun4i-a10.dtsi b/dts/src/arm/sun4i-a10.dtsi index d96e179490..459cb63777 100644 --- a/dts/src/arm/sun4i-a10.dtsi +++ b/dts/src/arm/sun4i-a10.dtsi @@ -509,7 +509,7 @@ clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; - #address-cells = <1>; + #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; @@ -593,6 +593,20 @@ allwinner,drive = <0>; allwinner,pull = <1>; }; + + ir0_pins_a: ir0@0 { + allwinner,pins = "PB3","PB4"; + allwinner,function = "ir0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + ir1_pins_a: ir1@0 { + allwinner,pins = "PB22","PB23"; + allwinner,function = "ir1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -621,6 +635,24 @@ status = "disabled"; }; + ir0: ir@01c21800 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&apb0_gates 6>, <&ir0_clk>; + clock-names = "apb", "ir"; + interrupts = <5>; + reg = <0x01c21800 0x40>; + status = "disabled"; + }; + + ir1: ir@01c21c00 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&apb0_gates 7>, <&ir1_clk>; + clock-names = "apb", "ir"; + interrupts = <6>; + reg = <0x01c21c00 0x40>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; diff --git a/dts/src/arm/sun5i-a10s.dtsi b/dts/src/arm/sun5i-a10s.dtsi index b64f705d90..24b0ad3a7c 100644 --- a/dts/src/arm/sun5i-a10s.dtsi +++ b/dts/src/arm/sun5i-a10s.dtsi @@ -422,7 +422,7 @@ clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; - #address-cells = <1>; + #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; diff --git a/dts/src/arm/sun5i-a13.dtsi b/dts/src/arm/sun5i-a13.dtsi index 3b2a94c40f..bf86e65dd1 100644 --- a/dts/src/arm/sun5i-a13.dtsi +++ b/dts/src/arm/sun5i-a13.dtsi @@ -395,7 +395,7 @@ clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; - #address-cells = <1>; + #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; diff --git a/dts/src/arm/sun6i-a31-hummingbird.dts b/dts/src/arm/sun6i-a31-hummingbird.dts new file mode 100644 index 0000000000..f142065b3c --- /dev/null +++ b/dts/src/arm/sun6i-a31-hummingbird.dts @@ -0,0 +1,119 @@ +/* + * Copyright 2014 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun6i-a31.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Merrii A31 Hummingbird"; + compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 8 0>; /* PA8 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c19400 { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + + ehci0: usb@01c1a000 { + status = "okay"; + }; + + ohci0: usb@01c1a400 { + status = "okay"; + }; + + pio: pinctrl@01c20800 { + mmc0_pins_a: mmc0@0 { + /* external pull-ups missing for some pins */ + allwinner,pull = <1>; + }; + + mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + usb1_vbus_pin_a: usb1_vbus_pin@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + /* pull-ups and devices require AXP221 DLDO3 */ + status = "failed"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + gmac: ethernet@01c30000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + reg_usb1_vbus: usb1-vbus { + pinctrl-0 = <&usb1_vbus_pin_a>; + gpio = <&pio 7 24 0>; /* PH24 */ + status = "okay"; + }; +}; diff --git a/dts/src/arm/sun6i-a31.dtsi b/dts/src/arm/sun6i-a31.dtsi index a9dfa12eb7..44b07e512c 100644 --- a/dts/src/arm/sun6i-a31.dtsi +++ b/dts/src/arm/sun6i-a31.dtsi @@ -23,6 +23,7 @@ serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; + ethernet0 = &gmac; }; @@ -281,6 +282,34 @@ "usb_ohci0", "usb_ohci1", "usb_ohci2"; }; + + /* + * The following two are dummy clocks, placeholders used in the gmac_tx + * clock. The gmac driver will choose one parent depending on the PHY + * interface mode, using clk_set_rate auto-reparenting. + * The actual TX clock rate is not controlled by the gmac_tx clock. + */ + mii_phy_tx_clk: clk@1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + clock-output-names = "mii_phy_tx"; + }; + + gmac_int_tx_clk: clk@2 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_int_tx"; + }; + + gmac_tx_clk: clk@01c200d0 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-gmac-clk"; + reg = <0x01c200d0 0x4>; + clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; + clock-output-names = "gmac_tx"; + }; }; soc@01c00000 { @@ -429,7 +458,7 @@ clocks = <&apb1_gates 5>; gpio-controller; interrupt-controller; - #address-cells = <1>; + #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; @@ -467,6 +496,48 @@ allwinner,drive = <2>; allwinner,pull = <0>; }; + + gmac_pins_mii_a: gmac_mii@0 { + allwinner,pins = "PA0", "PA1", "PA2", "PA3", + "PA8", "PA9", "PA11", + "PA12", "PA13", "PA14", "PA19", + "PA20", "PA21", "PA22", "PA23", + "PA24", "PA26", "PA27"; + allwinner,function = "gmac"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + gmac_pins_gmii_a: gmac_gmii@0 { + allwinner,pins = "PA0", "PA1", "PA2", "PA3", + "PA4", "PA5", "PA6", "PA7", + "PA8", "PA9", "PA10", "PA11", + "PA12", "PA13", "PA14", "PA15", + "PA16", "PA17", "PA18", "PA19", + "PA20", "PA21", "PA22", "PA23", + "PA24", "PA25", "PA26", "PA27"; + allwinner,function = "gmac"; + /* + * data lines in GMII mode run at 125MHz and + * might need a higher signal drive strength + */ + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + gmac_pins_rgmii_a: gmac_rgmii@0 { + allwinner,pins = "PA0", "PA1", "PA2", "PA3", + "PA9", "PA10", "PA11", + "PA12", "PA13", "PA14", "PA19", + "PA20", "PA25", "PA26", "PA27"; + allwinner,function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + allwinner,drive = <3>; + allwinner,pull = <0>; + }; }; ahb1_rst: reset@01c202c0 { @@ -621,6 +692,23 @@ status = "disabled"; }; + gmac: ethernet@01c30000 { + compatible = "allwinner,sun7i-a20-gmac"; + reg = <0x01c30000 0x1054>; + interrupts = <0 82 4>; + interrupt-names = "macirq"; + clocks = <&ahb1_gates 17>, <&gmac_tx_clk>; + clock-names = "stmmaceth", "allwinner_gmac_tx"; + resets = <&ahb1_rst 17>; + reset-names = "stmmaceth"; + snps,pbl = <2>; + snps,fixed-burst; + snps,force_sf_dma_mode; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + timer@01c60000 { compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; @@ -756,7 +844,7 @@ resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; - #address-cells = <1>; + #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; }; diff --git a/dts/src/arm/sun7i-a20-cubieboard2.dts b/dts/src/arm/sun7i-a20-cubieboard2.dts index a5ad945197..5368098346 100644 --- a/dts/src/arm/sun7i-a20-cubieboard2.dts +++ b/dts/src/arm/sun7i-a20-cubieboard2.dts @@ -66,6 +66,12 @@ }; }; + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -76,6 +82,16 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; }; i2c1: i2c@01c2b000 { diff --git a/dts/src/arm/sun7i-a20-cubietruck.dts b/dts/src/arm/sun7i-a20-cubietruck.dts index b87fea9014..a6c1a3c717 100644 --- a/dts/src/arm/sun7i-a20-cubietruck.dts +++ b/dts/src/arm/sun7i-a20-cubietruck.dts @@ -100,6 +100,12 @@ status = "okay"; }; + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -110,6 +116,16 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; }; i2c1: i2c@01c2b000 { diff --git a/dts/src/arm/sun7i-a20-i12-tvbox.dts b/dts/src/arm/sun7i-a20-i12-tvbox.dts index b77308e901..6a67712d41 100644 --- a/dts/src/arm/sun7i-a20-i12-tvbox.dts +++ b/dts/src/arm/sun7i-a20-i12-tvbox.dts @@ -94,12 +94,34 @@ }; }; + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + gmac: ethernet@01c50000 { pinctrl-names = "default"; pinctrl-0 = <&gmac_pins_mii_a>; diff --git a/dts/src/arm/sun7i-a20-olinuxino-micro.dts b/dts/src/arm/sun7i-a20-olinuxino-micro.dts index b759630bc9..9d669cdf03 100644 --- a/dts/src/arm/sun7i-a20-olinuxino-micro.dts +++ b/dts/src/arm/sun7i-a20-olinuxino-micro.dts @@ -122,6 +122,16 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; }; i2c1: i2c@01c2b000 { diff --git a/dts/src/arm/sun7i-a20-pcduino3.dts b/dts/src/arm/sun7i-a20-pcduino3.dts new file mode 100644 index 0000000000..046dfc0d45 --- /dev/null +++ b/dts/src/arm/sun7i-a20-pcduino3.dts @@ -0,0 +1,173 @@ +/* + * Copyright 2014 Zoltan HERPAI + * Zoltan HERPAI <wigyori@uid0.hu> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "LinkSprite pcDuino3"; + compatible = "linksprite,pcduino3", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + target-supply = <®_ahci_5v>; + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + ahci_pwr_pin_a: ahci_pwr_pin@0 { + allwinner,pins = "PH2"; + }; + + led_pins_pcduino3: led_pins@0 { + allwinner,pins = "PH15", "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + key_pins_pcduino3: key_pins@0 { + allwinner,pins = "PH17", "PH18", "PH19"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_pcduino3>; + + tx { + label = "pcduino3:green:tx"; + gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; + }; + + rx { + label = "pcduino3:green:rx"; + gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_pins_pcduino3>; + #address-cells = <1>; + #size-cells = <0>; + button@0 { + label = "Key Back"; + linux,code = <KEY_BACK>; + gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; + }; + button@1 { + label = "Key Home"; + linux,code = <KEY_HOME>; + gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; + }; + button@2 { + label = "Key Menu"; + linux,code = <KEY_MENU>; + gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_ahci_5v: ahci-5v { + gpio = <&pio 7 2 0>; + status = "okay"; + }; +}; diff --git a/dts/src/arm/sun7i-a20.dtsi b/dts/src/arm/sun7i-a20.dtsi index 01e9466423..4011628c73 100644 --- a/dts/src/arm/sun7i-a20.dtsi +++ b/dts/src/arm/sun7i-a20.dtsi @@ -586,7 +586,7 @@ clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; - #address-cells = <1>; + #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; @@ -738,6 +738,20 @@ allwinner,drive = <2>; allwinner,pull = <0>; }; + + ir0_pins_a: ir0@0 { + allwinner,pins = "PB3","PB4"; + allwinner,function = "ir0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + ir1_pins_a: ir1@0 { + allwinner,pins = "PB22","PB23"; + allwinner,function = "ir1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -771,6 +785,24 @@ status = "disabled"; }; + ir0: ir@01c21800 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&apb0_gates 6>, <&ir0_clk>; + clock-names = "apb", "ir"; + interrupts = <0 5 4>; + reg = <0x01c21800 0x40>; + status = "disabled"; + }; + + ir1: ir@01c21c00 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&apb0_gates 7>, <&ir1_clk>; + clock-names = "apb", "ir"; + interrupts = <0 6 4>; + reg = <0x01c21c00 0x40>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; diff --git a/dts/src/arm/sun8i-a23-ippo-q8h-v5.dts b/dts/src/arm/sun8i-a23-ippo-q8h-v5.dts new file mode 100644 index 0000000000..34002e3eba --- /dev/null +++ b/dts/src/arm/sun8i-a23-ippo-q8h-v5.dts @@ -0,0 +1,30 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun8i-a23.dtsi" + +/ { + model = "Ippo Q8H Dual Core Tablet (v5)"; + compatible = "ippo,q8h-v5", "allwinner,sun8i-a23"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc@01c00000 { + r_uart: serial@01f02800 { + status = "okay"; + }; + }; +}; diff --git a/dts/src/arm/sun8i-a23.dtsi b/dts/src/arm/sun8i-a23.dtsi new file mode 100644 index 0000000000..54ac078721 --- /dev/null +++ b/dts/src/arm/sun8i-a23.dtsi @@ -0,0 +1,343 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &r_uart; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + memory { + reg = <0x40000000 0x40000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + pll1: clk@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + + /* dummy clock until actually implemented */ + pll6: pll6_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <600000000>; + clock-output-names = "pll6"; + }; + + cpu: cpu_clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-cpu-clk"; + reg = <0x01c20050 0x4>; + + /* + * PLL1 is listed twice here. + * While it looks suspicious, it's actually documented + * that way both in the datasheet and in the code from + * Allwinner. + */ + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; + clock-output-names = "cpu"; + }; + + axi: axi_clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-axi-clk"; + reg = <0x01c20050 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + + ahb1_mux: ahb1_mux_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun6i-a31-ahb1-mux-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>; + clock-output-names = "ahb1_mux"; + }; + + ahb1: ahb1_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb1_mux>; + clock-output-names = "ahb1"; + }; + + apb1: apb1_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb1>; + clock-output-names = "apb1"; + }; + + ahb1_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb1>; + clock-output-names = "ahb1_mipidsi", "ahb1_dma", + "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", + "ahb1_nand", "ahb1_sdram", + "ahb1_hstimer", "ahb1_spi0", + "ahb1_spi1", "ahb1_otg", "ahb1_ehci", + "ahb1_ohci", "ahb1_ve", "ahb1_lcd", + "ahb1_csi", "ahb1_be", "ahb1_fe", + "ahb1_gpu", "ahb1_spinlock", + "ahb1_drc"; + }; + + apb1_gates: clk@01c20068 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-apb1-gates-clk"; + reg = <0x01c20068 0x4>; + clocks = <&apb1>; + clock-output-names = "apb1_codec", "apb1_pio", + "apb1_daudio0", "apb1_daudio1"; + }; + + apb2_mux: apb2_mux_clk@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-mux-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; + clock-output-names = "apb2_mux"; + }; + + apb2: apb2_clk@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun6i-a31-apb2-div-clk"; + reg = <0x01c20058 0x4>; + clocks = <&apb2_mux>; + clock-output-names = "apb2"; + }; + + apb2_gates: clk@01c2006c { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-apb2-gates-clk"; + reg = <0x01c2006c 0x4>; + clocks = <&apb2>; + clock-output-names = "apb2_i2c0", "apb2_i2c1", + "apb2_i2c2", "apb2_uart0", + "apb2_uart1", "apb2_uart2", + "apb2_uart3", "apb2_uart4"; + }; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ahb1_rst: reset@01c202c0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202c0 0xc>; + }; + + apb1_rst: reset@01c202d0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202d0 0x4>; + }; + + apb2_rst: reset@01c202d8 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202d8 0x4>; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <0 18 4>, + <0 19 4>; + clocks = <&osc24M>; + }; + + wdt0: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = <0 25 4>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <0 0 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 16>; + resets = <&apb2_rst 16>; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <0 1 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 17>; + resets = <&apb2_rst 17>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <0 2 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 18>; + resets = <&apb2_rst 18>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <0 3 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 19>; + resets = <&apb2_rst 19>; + status = "disabled"; + }; + + uart4: serial@01c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <0 4 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 20>; + resets = <&apb2_rst 20>; + status = "disabled"; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <1 9 0xf04>; + }; + + prcm@01f01400 { + compatible = "allwinner,sun8i-a23-prcm"; + reg = <0x01f01400 0x200>; + + ar100: ar100_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "ar100"; + }; + + ahb0: ahb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&ar100>; + clock-output-names = "ahb0"; + }; + + apb0: apb0_clk { + compatible = "allwinner,sun8i-a23-apb0-clk"; + #clock-cells = <0>; + clocks = <&ahb0>; + clock-output-names = "apb0"; + }; + + apb0_gates: apb0_gates_clk { + compatible = "allwinner,sun8i-a23-apb0-gates-clk"; + #clock-cells = <1>; + clocks = <&apb0>; + clock-output-names = "apb0_pio", "apb0_timer", + "apb0_rsb", "apb0_uart", + "apb0_i2c"; + }; + + apb0_rst: apb0_rst { + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + }; + + r_uart: serial@01f02800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01f02800 0x400>; + interrupts = <0 38 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb0_gates 4>; + resets = <&apb0_rst 4>; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm/tegra114-roth.dts b/dts/src/arm/tegra114-roth.dts index 0b0e8e07d9..c7c6825f11 100644 --- a/dts/src/arm/tegra114-roth.dts +++ b/dts/src/arm/tegra114-roth.dts @@ -28,6 +28,22 @@ reg = <0x80000000 0x79600000>; }; + host1x@50000000 { + dsi@54300000 { + status = "okay"; + + vdd-supply = <&vdd_1v2_ap>; + + panel@0 { + compatible = "lg,lh500wx1-sd03"; + reg = <0>; + + power-supply = <&vdd_lcd>; + backlight = <&backlight>; + }; + }; + }; + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -244,7 +260,7 @@ nvidia,function = "sdmmc1"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc1_cmd_pz1 { nvidia,pins = "sdmmc1_cmd_pz1", @@ -262,7 +278,7 @@ nvidia,function = "sdmmc3"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc3_cmd_pa7 { nvidia,pins = "sdmmc3_cmd_pa7", @@ -290,7 +306,7 @@ nvidia,function = "sdmmc4"; nvidia,pull = <TEGRA_PIN_PULL_NONE>; nvidia,tristate = <TEGRA_PIN_DISABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc4_cmd_pt7 { nvidia,pins = "sdmmc4_cmd_pt7", @@ -730,7 +746,6 @@ nvidia,pins = "drive_sdio1"; nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <36>; nvidia,pull-up-strength = <20>; nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>; @@ -740,7 +755,6 @@ nvidia,pins = "drive_sdio3"; nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <36>; nvidia,pull-up-strength = <20>; nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; @@ -750,12 +764,10 @@ nvidia,pins = "drive_gma"; nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; nvidia,schmitt = <TEGRA_PIN_DISABLE>; - nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <2>; nvidia,pull-up-strength = <2>; nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; - nvidia,drive-type = <1>; }; }; }; @@ -815,7 +827,6 @@ regulator-name = "vdd-1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-boot-on; }; @@ -862,10 +873,11 @@ regulator-name = "vdd-2v8-display"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-always-on; regulator-boot-on; }; - ldo3 { + vdd_1v2_ap: ldo3 { regulator-name = "avdd-1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -1052,7 +1064,7 @@ regulator-boot-on; }; - regulator@1 { + vdd_lcd: regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "vdd_lcd_1v8"; diff --git a/dts/src/arm/tegra114.dtsi b/dts/src/arm/tegra114.dtsi index fdc559ab2d..80b8eddb41 100644 --- a/dts/src/arm/tegra114.dtsi +++ b/dts/src/arm/tegra114.dtsi @@ -220,6 +220,12 @@ interrupt-controller; }; + apbmisc@70000800 { + compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc"; + reg = <0x70000800 0x64 /* Chip revision */ + 0x70000008 0x04>; /* Strapping options */ + }; + pinmux: pinmux@70000868 { compatible = "nvidia,tegra114-pinmux"; reg = <0x70000868 0x148 /* Pad control registers */ @@ -485,6 +491,15 @@ clock-names = "pclk", "clk32k_in"; }; + fuse@7000f800 { + compatible = "nvidia,tegra114-efuse"; + reg = <0x7000f800 0x400>; + clocks = <&tegra_car TEGRA114_CLK_FUSE>; + clock-names = "fuse"; + resets = <&tegra_car 39>; + reset-names = "fuse"; + }; + iommu@70019010 { compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu"; reg = <0x70019010 0x02c @@ -657,6 +672,8 @@ <&tegra_car TEGRA114_CLK_PLL_U>, <&tegra_car TEGRA114_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -667,6 +684,7 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -690,6 +708,8 @@ <&tegra_car TEGRA114_CLK_PLL_U>, <&tegra_car TEGRA114_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/dts/src/arm/tegra124-jetson-tk1.dts b/dts/src/arm/tegra124-jetson-tk1.dts index e31fb61a81..624b0fba2d 100644 --- a/dts/src/arm/tegra124-jetson-tk1.dts +++ b/dts/src/arm/tegra124-jetson-tk1.dts @@ -1461,7 +1461,7 @@ regulator-max-microamp = <3500000>; regulator-always-on; regulator-boot-on; - ams,external-control = <2>; + ams,ext-control = <2>; }; sd1 { @@ -1472,7 +1472,7 @@ regulator-max-microamp = <2500000>; regulator-always-on; regulator-boot-on; - ams,external-control = <1>; + ams,ext-control = <1>; }; vdd_1v35_lp0: sd2 { @@ -1521,7 +1521,7 @@ regulator-max-microvolt = <1050000>; regulator-boot-on; regulator-always-on; - ams,external-control = <1>; + ams,ext-control = <1>; }; ldo1 { @@ -1619,6 +1619,32 @@ nvidia,sys-clock-req-active-high; }; + padctl@0,7009f000 { + pinctrl-0 = <&padctl_default>; + pinctrl-names = "default"; + + padctl_default: pinmux { + usb3 { + nvidia,lanes = "pcie-0", "pcie-1"; + nvidia,function = "usb3"; + nvidia,iddq = <0>; + }; + + pcie { + nvidia,lanes = "pcie-2", "pcie-3", + "pcie-4"; + nvidia,function = "pcie"; + nvidia,iddq = <0>; + }; + + sata { + nvidia,lanes = "sata-0"; + nvidia,function = "sata"; + nvidia,iddq = <0>; + }; + }; + }; + /* SD card */ sdhci@0,700b0400 { status = "okay"; @@ -1633,6 +1659,7 @@ sdhci@0,700b0600 { status = "okay"; bus-width = <8>; + non-removable; }; ahub@0,70300000 { diff --git a/dts/src/arm/tegra124-venice2.dts b/dts/src/arm/tegra124-venice2.dts index f0bb842440..70ad91d1a2 100644 --- a/dts/src/arm/tegra124-venice2.dts +++ b/dts/src/arm/tegra124-venice2.dts @@ -682,7 +682,7 @@ regulator-max-microamp = <3500000>; regulator-always-on; regulator-boot-on; - ams,external-control = <2>; + ams,ext-control = <2>; }; sd1 { @@ -693,7 +693,7 @@ regulator-max-microamp = <2500000>; regulator-always-on; regulator-boot-on; - ams,external-control = <1>; + ams,ext-control = <1>; }; vdd_1v35_lp0: sd2 { @@ -742,7 +742,7 @@ regulator-max-microvolt = <1050000>; regulator-boot-on; regulator-always-on; - ams,external-control = <1>; + ams,ext-control = <1>; }; ldo1 { @@ -816,7 +816,7 @@ spi@0,7000d400 { status = "okay"; - cros-ec@0 { + cros_ec: cros-ec@0 { compatible = "google,cros-ec-spi"; spi-max-frequency = <4000000>; interrupt-parent = <&gpio>; @@ -825,96 +825,30 @@ google,cros-ec-spi-msg-delay = <2000>; - cros-ec-keyb { - compatible = "google,cros-ec-keyb"; - keypad,num-rows = <8>; - keypad,num-columns = <13>; - google,needs-ghost-filter; - - linux,keymap = < - MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA) - MATRIX_KEY(0x00, 0x02, KEY_F1) - MATRIX_KEY(0x00, 0x03, KEY_B) - MATRIX_KEY(0x00, 0x04, KEY_F10) - MATRIX_KEY(0x00, 0x06, KEY_N) - MATRIX_KEY(0x00, 0x08, KEY_EQUAL) - MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT) - - MATRIX_KEY(0x01, 0x01, KEY_ESC) - MATRIX_KEY(0x01, 0x02, KEY_F4) - MATRIX_KEY(0x01, 0x03, KEY_G) - MATRIX_KEY(0x01, 0x04, KEY_F7) - MATRIX_KEY(0x01, 0x06, KEY_H) - MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE) - MATRIX_KEY(0x01, 0x09, KEY_F9) - MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE) - - MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL) - MATRIX_KEY(0x02, 0x01, KEY_TAB) - MATRIX_KEY(0x02, 0x02, KEY_F3) - MATRIX_KEY(0x02, 0x03, KEY_T) - MATRIX_KEY(0x02, 0x04, KEY_F6) - MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE) - MATRIX_KEY(0x02, 0x06, KEY_Y) - MATRIX_KEY(0x02, 0x07, KEY_102ND) - MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE) - MATRIX_KEY(0x02, 0x09, KEY_F8) - - MATRIX_KEY(0x03, 0x01, KEY_GRAVE) - MATRIX_KEY(0x03, 0x02, KEY_F2) - MATRIX_KEY(0x03, 0x03, KEY_5) - MATRIX_KEY(0x03, 0x04, KEY_F5) - MATRIX_KEY(0x03, 0x06, KEY_6) - MATRIX_KEY(0x03, 0x08, KEY_MINUS) - MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) - - MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) - MATRIX_KEY(0x04, 0x01, KEY_A) - MATRIX_KEY(0x04, 0x02, KEY_D) - MATRIX_KEY(0x04, 0x03, KEY_F) - MATRIX_KEY(0x04, 0x04, KEY_S) - MATRIX_KEY(0x04, 0x05, KEY_K) - MATRIX_KEY(0x04, 0x06, KEY_J) - MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON) - MATRIX_KEY(0x04, 0x09, KEY_L) - MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH) - MATRIX_KEY(0x04, 0x0b, KEY_ENTER) - - MATRIX_KEY(0x05, 0x01, KEY_Z) - MATRIX_KEY(0x05, 0x02, KEY_C) - MATRIX_KEY(0x05, 0x03, KEY_V) - MATRIX_KEY(0x05, 0x04, KEY_X) - MATRIX_KEY(0x05, 0x05, KEY_COMMA) - MATRIX_KEY(0x05, 0x06, KEY_M) - MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT) - MATRIX_KEY(0x05, 0x08, KEY_SLASH) - MATRIX_KEY(0x05, 0x09, KEY_DOT) - MATRIX_KEY(0x05, 0x0b, KEY_SPACE) - - MATRIX_KEY(0x06, 0x01, KEY_1) - MATRIX_KEY(0x06, 0x02, KEY_3) - MATRIX_KEY(0x06, 0x03, KEY_4) - MATRIX_KEY(0x06, 0x04, KEY_2) - MATRIX_KEY(0x06, 0x05, KEY_8) - MATRIX_KEY(0x06, 0x06, KEY_7) - MATRIX_KEY(0x06, 0x08, KEY_0) - MATRIX_KEY(0x06, 0x09, KEY_9) - MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT) - MATRIX_KEY(0x06, 0x0b, KEY_DOWN) - MATRIX_KEY(0x06, 0x0c, KEY_RIGHT) - - MATRIX_KEY(0x07, 0x01, KEY_Q) - MATRIX_KEY(0x07, 0x02, KEY_E) - MATRIX_KEY(0x07, 0x03, KEY_R) - MATRIX_KEY(0x07, 0x04, KEY_W) - MATRIX_KEY(0x07, 0x05, KEY_I) - MATRIX_KEY(0x07, 0x06, KEY_U) - MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT) - MATRIX_KEY(0x07, 0x08, KEY_P) - MATRIX_KEY(0x07, 0x09, KEY_O) - MATRIX_KEY(0x07, 0x0b, KEY_UP) - MATRIX_KEY(0x07, 0x0c, KEY_LEFT) - >; + i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + + google,remote-bus = <0>; + + charger: bq24735@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(J, 0) + GPIO_ACTIVE_HIGH>; + ti,ac-detect-gpios = <&gpio + TEGRA_GPIO(J, 0) + GPIO_ACTIVE_HIGH>; + }; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <1>; + }; }; }; }; @@ -940,6 +874,10 @@ nvidia,sys-clock-req-active-high; }; + hda@0,70030000 { + status = "okay"; + }; + sdhci@0,700b0400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; @@ -1205,3 +1143,5 @@ clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; + +#include "cros-ec-keyboard.dtsi" diff --git a/dts/src/arm/tegra124.dtsi b/dts/src/arm/tegra124.dtsi index 6e6bc4e818..03916efd6f 100644 --- a/dts/src/arm/tegra124.dtsi +++ b/dts/src/arm/tegra124.dtsi @@ -1,6 +1,7 @@ #include <dt-bindings/clock/tegra124-car.h> #include <dt-bindings/gpio/tegra-gpio.h> #include <dt-bindings/pinctrl/pinctrl-tegra.h> +#include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton.dtsi" @@ -102,6 +103,21 @@ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + gpu@0,57000000 { + compatible = "nvidia,gk20a"; + reg = <0x0 0x57000000 0x0 0x01000000>, + <0x0 0x58000000 0x0 0x01000000>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "stall", "nonstall"; + clocks = <&tegra_car TEGRA124_CLK_GPU>, + <&tegra_car TEGRA124_CLK_PLL_P_OUT5>; + clock-names = "gpu", "pwr"; + resets = <&tegra_car 184>; + reset-names = "gpu"; + status = "disabled"; + }; + timer@0,60005000 { compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer"; reg = <0x0 0x60005000 0x0 0x400>; @@ -179,6 +195,12 @@ #dma-cells = <1>; }; + apbmisc@0,70000800 { + compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"; + reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */ + <0x0 0x7000E864 0x0 0x04>; /* Strapping options */ + }; + pinmux: pinmux@0,70000868 { compatible = "nvidia,tegra124-pinmux"; reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */ @@ -449,6 +471,39 @@ clock-names = "pclk", "clk32k_in"; }; + fuse@0,7000f800 { + compatible = "nvidia,tegra124-efuse"; + reg = <0x0 0x7000f800 0x0 0x400>; + clocks = <&tegra_car TEGRA124_CLK_FUSE>; + clock-names = "fuse"; + resets = <&tegra_car 39>; + reset-names = "fuse"; + }; + + hda@0,70030000 { + compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda"; + reg = <0x0 0x70030000 0x0 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_HDA>, + <&tegra_car TEGRA124_CLK_HDA2HDMI>, + <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>; + clock-names = "hda", "hda2hdmi", "hdacodec_2x"; + resets = <&tegra_car 125>, /* hda */ + <&tegra_car 128>, /* hda2hdmi */ + <&tegra_car 111>; /* hda2codec_2x */ + reset-names = "hda", "hda2hdmi", "hdacodec_2x"; + status = "disabled"; + }; + + padctl: padctl@0,7009f000 { + compatible = "nvidia,tegra124-xusb-padctl"; + reg = <0x0 0x7009f000 0x0 0x1000>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + + #phy-cells = <1>; + }; + sdhci@0,700b0000 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; @@ -613,6 +668,8 @@ <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -647,6 +704,8 @@ <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -657,6 +716,7 @@ nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -681,6 +741,8 @@ <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 58>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/dts/src/arm/tegra20-harmony.dts b/dts/src/arm/tegra20-harmony.dts index f45aad688d..a37279af68 100644 --- a/dts/src/arm/tegra20-harmony.dts +++ b/dts/src/arm/tegra20-harmony.dts @@ -562,10 +562,14 @@ }; pcie-controller@80003000 { - pex-clk-supply = <&pci_clk_reg>; - vdd-supply = <&pci_vdd_reg>; status = "okay"; + avdd-pex-supply = <&pci_vdd_reg>; + vdd-pex-supply = <&pci_vdd_reg>; + avdd-pex-pll-supply = <&pci_vdd_reg>; + avdd-plle-supply = <&pci_vdd_reg>; + vddio-pex-clk-supply = <&pci_clk_reg>; + pci@1,0 { status = "okay"; }; diff --git a/dts/src/arm/tegra20-medcom-wide.dts b/dts/src/arm/tegra20-medcom-wide.dts index 6d3a4cbc36..1b7c56b33a 100644 --- a/dts/src/arm/tegra20-medcom-wide.dts +++ b/dts/src/arm/tegra20-medcom-wide.dts @@ -10,6 +10,15 @@ status = "okay"; }; + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + nvidia,panel = <&panel>; + }; + }; + }; + i2c@7000c000 { wm8903: wm8903@1a { compatible = "wlf,wm8903"; @@ -30,7 +39,7 @@ }; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 5000000>; @@ -38,6 +47,15 @@ default-brightness-level = <6>; }; + panel: panel { + compatible = "innolux,n156bge-l21", "simple-panel"; + + power-supply = <&vdd_1v8_reg>, <&vdd_3v3_reg>; + enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>; + + backlight = <&backlight>; + }; + sound { compatible = "ad,tegra-audio-wm8903-medcom-wide", "nvidia,tegra-audio-wm8903"; @@ -64,4 +82,45 @@ <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + regulators { + vcc_24v_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "vcc_24v"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + regulator-always-on; + }; + + vdd_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "vdd_5v0"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdd_3v3_reg: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + regulator-name = "vdd_3v3"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_1v8_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + regulator-name = "vdd_1v8"; + vin-supply = <&vdd_3v3_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; }; diff --git a/dts/src/arm/tegra20-paz00.dts b/dts/src/arm/tegra20-paz00.dts index 9a39a8001f..d4438e30de 100644 --- a/dts/src/arm/tegra20-paz00.dts +++ b/dts/src/arm/tegra20-paz00.dts @@ -296,7 +296,7 @@ request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; slave-addr = <138>; clocks = <&tegra_car TEGRA20_CLK_I2C3>, - <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; resets = <&tegra_car 67>; reset-names = "i2c"; @@ -589,8 +589,8 @@ GPIO_ACTIVE_HIGH>; clocks = <&tegra_car TEGRA20_CLK_PLL_A>, - <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA20_CLK_CDEV1>; + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/dts/src/arm/tegra20-plutux.dts b/dts/src/arm/tegra20-plutux.dts index 29051a2ae0..a10b415bbd 100644 --- a/dts/src/arm/tegra20-plutux.dts +++ b/dts/src/arm/tegra20-plutux.dts @@ -58,4 +58,45 @@ <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + regulators { + vcc_24v_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "vcc_24v"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + regulator-always-on; + }; + + vdd_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "vdd_5v0"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdd_3v3_reg: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + regulator-name = "vdd_3v3"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_1v8_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + regulator-name = "vdd_1v8"; + vin-supply = <&vdd_3v3_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; }; diff --git a/dts/src/arm/tegra20-tamonten.dtsi b/dts/src/arm/tegra20-tamonten.dtsi index a1b0d96575..80e7d386ce 100644 --- a/dts/src/arm/tegra20-tamonten.dtsi +++ b/dts/src/arm/tegra20-tamonten.dtsi @@ -334,6 +334,7 @@ #gpio-cells = <2>; gpio-controller; + /* vdd_5v0_reg must be provided by the base board */ sys-supply = <&vdd_5v0_reg>; vin-sm0-supply = <&sys_reg>; vin-sm1-supply = <&sys_reg>; @@ -473,8 +474,11 @@ }; pcie-controller@80003000 { - pex-clk-supply = <&pci_clk_reg>; - vdd-supply = <&pci_vdd_reg>; + avdd-pex-supply = <&pci_vdd_reg>; + vdd-pex-supply = <&pci_vdd_reg>; + avdd-pex-pll-supply = <&pci_vdd_reg>; + avdd-plle-supply = <&pci_vdd_reg>; + vddio-pex-clk-supply = <&pci_clk_reg>; }; usb@c5008000 { @@ -511,15 +515,6 @@ #address-cells = <1>; #size-cells = <0>; - vdd_5v0_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vdd_5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - pci_vdd_reg: regulator@1 { compatible = "regulator-fixed"; reg = <1>; diff --git a/dts/src/arm/tegra20-tec.dts b/dts/src/arm/tegra20-tec.dts index 890562c667..c12d8bead2 100644 --- a/dts/src/arm/tegra20-tec.dts +++ b/dts/src/arm/tegra20-tec.dts @@ -67,4 +67,45 @@ <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + regulators { + vcc_24v_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "vcc_24v"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + regulator-always-on; + }; + + vdd_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "vdd_5v0"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdd_3v3_reg: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + regulator-name = "vdd_3v3"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_1v8_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + regulator-name = "vdd_1v8"; + vin-supply = <&vdd_3v3_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; }; diff --git a/dts/src/arm/tegra20-trimslice.dts b/dts/src/arm/tegra20-trimslice.dts index 216fa6d50c..5ad87979ab 100644 --- a/dts/src/arm/tegra20-trimslice.dts +++ b/dts/src/arm/tegra20-trimslice.dts @@ -318,8 +318,12 @@ pcie-controller@80003000 { status = "okay"; - pex-clk-supply = <&pci_clk_reg>; - vdd-supply = <&pci_vdd_reg>; + + avdd-pex-supply = <&pci_vdd_reg>; + vdd-pex-supply = <&pci_vdd_reg>; + avdd-pex-pll-supply = <&pci_vdd_reg>; + avdd-plle-supply = <&pci_vdd_reg>; + vddio-pex-clk-supply = <&pci_clk_reg>; pci@1,0 { status = "okay"; diff --git a/dts/src/arm/tegra20.dtsi b/dts/src/arm/tegra20.dtsi index a7ddf70df5..1908f6937e 100644 --- a/dts/src/arm/tegra20.dtsi +++ b/dts/src/arm/tegra20.dtsi @@ -236,6 +236,12 @@ interrupt-controller; }; + apbmisc@70000800 { + compatible = "nvidia,tegra20-apbmisc"; + reg = <0x70000800 0x64 /* Chip revision */ + 0x70000008 0x04>; /* Strapping options */ + }; + pinmux: pinmux@70000014 { compatible = "nvidia,tegra20-pinmux"; reg = <0x70000014 0x10 /* Tri-state registers */ @@ -545,6 +551,15 @@ #size-cells = <0>; }; + fuse@7000f800 { + compatible = "nvidia,tegra20-efuse"; + reg = <0x7000F800 0x400>; + clocks = <&tegra_car TEGRA20_CLK_FUSE>; + clock-names = "fuse"; + resets = <&tegra_car 39>; + reset-names = "fuse"; + }; + pcie-controller@80003000 { compatible = "nvidia,tegra20-pcie"; device_type = "pci"; @@ -630,6 +645,8 @@ <&tegra_car TEGRA20_CLK_CLK_M>, <&tegra_car TEGRA20_CLK_USBD>; clock-names = "reg", "pll_u", "timer", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,has-legacy-mode; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; @@ -638,6 +655,7 @@ nvidia,xcvr-setup = <9>; nvidia,xcvr-lsfslew = <1>; nvidia,xcvr-lsrslew = <1>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -661,6 +679,8 @@ <&tegra_car TEGRA20_CLK_PLL_U>, <&tegra_car TEGRA20_CLK_CDEV2>; clock-names = "reg", "pll_u", "ulpi-link"; + resets = <&tegra_car 58>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; status = "disabled"; }; @@ -685,6 +705,8 @@ <&tegra_car TEGRA20_CLK_CLK_M>, <&tegra_car TEGRA20_CLK_USBD>; clock-names = "reg", "pll_u", "timer", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/dts/src/arm/tegra30-apalis-eval.dts b/dts/src/arm/tegra30-apalis-eval.dts new file mode 100644 index 0000000000..45d40f0245 --- /dev/null +++ b/dts/src/arm/tegra30-apalis-eval.dts @@ -0,0 +1,260 @@ +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra30-apalis.dtsi" + +/ { + model = "Toradex Apalis T30 on Apalis Evaluation Board"; + compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30", "nvidia,tegra30"; + + aliases { + rtc0 = "/i2c@7000c000/rtc@68"; + rtc1 = "/i2c@7000d000/tps65911@2d"; + rtc2 = "/rtc@7000e000"; + }; + + pcie-controller@00003000 { + status = "okay"; + + pci@1,0 { + status = "okay"; + }; + + pci@2,0 { + status = "okay"; + }; + + pci@3,0 { + status = "okay"; + }; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + nvidia,panel = <&panel>; + }; + }; + hdmi@54280000 { + status = "okay"; + }; + }; + + serial@70006000 { + status = "okay"; + }; + + serial@70006040 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + serial@70006200 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + serial@70006300 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + /* + * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + + pcie-switch@58 { + compatible = "plx,pex8605"; + reg = <0x58>; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; + }; + + /* GEN2_I2C: unused */ + + /* + * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on + * carrier board) + */ + cami2c: i2c@7000c500 { + status = "okay"; + clock-frequency = <400000>; + }; + + /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */ + hdmiddc: i2c@7000c700 { + status = "okay"; + }; + + /* SPI1: Apalis SPI1 */ + spi@7000d400 { + status = "okay"; + spi-max-frequency = <25000000>; + spidev0: spidev@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <25000000>; + }; + }; + + /* SPI5: Apalis SPI2 */ + spi@7000dc00 { + status = "okay"; + spi-max-frequency = <25000000>; + spidev1: spidev@2 { + compatible = "spidev"; + reg = <2>; + spi-max-frequency = <25000000>; + }; + }; + + sd1: sdhci@78000000 { + status = "okay"; + bus-width = <4>; + /* SD1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>; + no-1-8-v; + }; + + mmc1: sdhci@78000400 { + status = "okay"; + bus-width = <8>; + /* MMC1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; + no-1-8-v; + }; + + /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ + usb@7d000000 { + status = "okay"; + }; + + usb-phy@7d000000 { + status = "okay"; + vbus-supply = <&usbo1_vbus_reg>; + }; + + /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ + usb@7d004000 { + status = "okay"; + }; + + usb-phy@7d004000 { + status = "okay"; + vbus-supply = <&usbh_vbus_reg>; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + vbus-supply = <&usbh_vbus_reg>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + /* PWM0 */ + pwms = <&pwm 0 5000000>; + brightness-levels = <255 231 223 207 191 159 127 0>; + default-brightness-level = <6>; + /* BKL1_ON */ + enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu", "simple-panel"; + + backlight = <&backlight>; + }; + + pwmleds { + compatible = "pwm-leds"; + + pwm1 { + label = "PWM1"; + pwms = <&pwm 3 19600>; + max-brightness = <255>; + }; + + pwm2 { + label = "PWM2"; + pwms = <&pwm 2 19600>; + max-brightness = <255>; + }; + + pwm3 { + label = "PWM3"; + pwms = <&pwm 1 19600>; + max-brightness = <255>; + }; + }; + + regulators { + sys_5v0_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + /* USBO1_EN */ + usbo1_vbus_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usbo1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&sys_5v0_reg>; + }; + + /* USBH_EN */ + usbh_vbus_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usbh_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&sys_5v0_reg>; + }; + }; +}; diff --git a/dts/src/arm/tegra30-apalis.dtsi b/dts/src/arm/tegra30-apalis.dtsi new file mode 100644 index 0000000000..8adaa7871d --- /dev/null +++ b/dts/src/arm/tegra30-apalis.dtsi @@ -0,0 +1,678 @@ +#include "tegra30.dtsi" + +/* + * Toradex Apalis T30 Device Tree + * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C + */ +/ { + model = "Toradex Apalis T30"; + compatible = "toradex,apalis_t30", "nvidia,tegra30"; + + pcie-controller@00003000 { + avdd-pexa-supply = <&vdd2_reg>; + vdd-pexa-supply = <&vdd2_reg>; + avdd-pexb-supply = <&vdd2_reg>; + vdd-pexb-supply = <&vdd2_reg>; + avdd-pex-pll-supply = <&vdd2_reg>; + avdd-plle-supply = <&ldo6_reg>; + vddio-pex-ctl-supply = <&sys_3v3_reg>; + hvdd-pex-supply = <&sys_3v3_reg>; + + pci@1,0 { + nvidia,num-lanes = <4>; + }; + + pci@2,0 { + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + nvidia,num-lanes = <1>; + }; + }; + + host1x@50000000 { + hdmi@54280000 { + vdd-supply = <&sys_3v3_reg>; + pll-supply = <&vio_reg>; + + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + nvidia,ddc-i2c-bus = <&hdmiddc>; + }; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* Apalis BKL1_ON */ + pv2 { + nvidia,pins = "pv2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis BKL1_PWM */ + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */ + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis CAN1 on SPI6 */ + spi2_cs0_n_px3 { + nvidia,pins = "spi2_cs0_n_px3", + "spi2_miso_px1", + "spi2_mosi_px0", + "spi2_sck_px2"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* CAN_INT1 */ + spi2_cs1_n_pw2 { + nvidia,pins = "spi2_cs1_n_pw2"; + nvidia,function = "spi3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis CAN2 on SPI4 */ + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* CAN_INT2 */ + spi2_cs2_n_pw3 { + nvidia,pins = "spi2_cs2_n_pw3"; + nvidia,function = "spi3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C3 */ + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis MMC1 */ + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6", + "sdmmc3_cmd_pa7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_dat4_pd1", + "sdmmc3_dat5_pd0", + "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* Apalis MMC1_CD# */ + pv3 { + nvidia,pins = "pv3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis PWM1 */ + gpio_pu6 { + nvidia,pins = "gpio_pu6"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis PWM2 */ + gpio_pu5 { + nvidia,pins = "gpio_pu5"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis PWM3 */ + gpio_pu4 { + nvidia,pins = "gpio_pu4"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis PWM4 */ + gpio_pu3 { + nvidia,pins = "gpio_pu3"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis RESET_MOCI# */ + gmi_rst_n_pi4 { + nvidia,pins = "gmi_rst_n_pi4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SD1 */ + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* Apalis SD1_CD# */ + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis SPI1 */ + spi1_sck_px5 { + nvidia,pins = "spi1_sck_px5", + "spi1_mosi_px4", + "spi1_miso_px7", + "spi1_cs0_n_px6"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SPI2 */ + lcd_sck_pz4 { + nvidia,pins = "lcd_sck_pz4", + "lcd_sdout_pn5", + "lcd_sdin_pz2", + "lcd_cs0_n_pn4"; + nvidia,function = "spi5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART1 */ + ulpi_data0 { + nvidia,pins = "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART2 */ + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART3 */ + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3", + "uart2_txd_pc2"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART4 */ + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBO1_EN */ + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "rsvd4"; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBO1_OC# */ + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "rsvd4"; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis WAKE1_MICO */ + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* eMMC (On-module) */ + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* LVDS Transceiver Configuration */ + pbb0 { + nvidia,pins = "pbb0", + "pbb7", + "pcc1", + "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + pbb3 { + nvidia,pins = "pbb3", + "pbb4", + "pbb5", + "pbb6"; + nvidia,function = "displayb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + }; + + /* Power I2C (On-module) */ + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* + * THERMD_ALERT#, unlatched I2C address pin of LM95245 + * temperature sensor therefore requires disabling for + * now + */ + lcd_dc1_pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* TOUCH_PEN_INT# */ + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + }; + }; + + hdmiddc: i2c@7000c700 { + clock-frequency = <100000>; + }; + + /* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&sys_3v3_reg>; + vcc2-supply = <&sys_3v3_reg>; + vcc3-supply = <&vio_reg>; + vcc4-supply = <&sys_3v3_reg>; + vcc5-supply = <&sys_3v3_reg>; + vcc6-supply = <&vio_reg>; + vcc7-supply = <&sys_5v0_reg>; + vccio-supply = <&sys_3v3_reg>; + + regulators { + /* SW1: +V1.35_VDDIO_DDR */ + vdd1_reg: vdd1 { + regulator-name = "vddio_ddr_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + /* SW2: +V1.05 */ + vdd2_reg: vdd2 { + regulator-name = + "vdd_pexa,vdd_pexb,vdd_sata"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + /* SW CTRL: +V1.0_VDD_CPU */ + vddctrl_reg: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + }; + + /* SWIO: +V1.8 */ + vio_reg: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* LDO1: unused */ + + /* + * EN_+V3.3 switching via FET: + * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN + * see also v3_3 fixed supply + */ + ldo2_reg: ldo2 { + regulator-name = "en_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* +V1.2_CSI */ + ldo3_reg: ldo3 { + regulator-name = + "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + /* +V1.2_VDD_RTC */ + ldo4_reg: ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* + * +V2.8_AVDD_VDAC: + * only required for analog RGB + */ + ldo5_reg: ldo5 { + regulator-name = "avdd_vdac"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + /* + * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V + * but LDO6 can't set voltage in 50mV + * granularity + */ + ldo6_reg: ldo6 { + regulator-name = "avdd_plle"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + /* +V1.2_AVDD_PLL */ + ldo7_reg: ldo7 { + regulator-name = "avdd_pll"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* +V1.0_VDD_DDR_HS */ + ldo8_reg: ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + + /* STMPE811 touch screen controller */ + stmpe811@41 { + compatible = "st,stmpe811"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = <TEGRA_GPIO(V, 0) IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + reg = <0>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; + + /* + * LM95245 temperature sensor + * Note: OVERT_N directly connected to PMIC PWRDN + */ + temp-sensor@4c { + compatible = "national,lm95245"; + reg = <0x4c>; + }; + + /* SW: +V1.2_VDD_CORE */ + tps62362@60 { + compatible = "ti,tps62362"; + reg = <0x60>; + + regulator-name = "tps62362-vout"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-low; + /* VSEL1: EN_CORE_DVFS_N low for DVFS */ + ti,vsel1-state-low; + }; + }; + + /* SPI4: CAN2 */ + spi@7000da00 { + status = "okay"; + spi-max-frequency = <10000000>; + + can@1 { + compatible = "microchip,mcp2515"; + reg = <1>; + clocks = <&clk16m>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_LOW>; + spi-max-frequency = <10000000>; + }; + }; + + /* SPI6: CAN1 */ + spi@7000de00 { + status = "okay"; + spi-max-frequency = <10000000>; + + can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; + spi-max-frequency = <10000000>; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clk@0 { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + clk16m: clk@1 { + compatible = "fixed-clock"; + reg=<1>; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "clk16m"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sys_3v3_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; diff --git a/dts/src/arm/tegra30-beaver.dts b/dts/src/arm/tegra30-beaver.dts index 3189791a92..cee8f2246f 100644 --- a/dts/src/arm/tegra30-beaver.dts +++ b/dts/src/arm/tegra30-beaver.dts @@ -17,9 +17,15 @@ pcie-controller@00003000 { status = "okay"; - pex-clk-supply = <&sys_3v3_pexs_reg>; - vdd-supply = <&ldo1_reg>; - avdd-supply = <&ldo2_reg>; + + avdd-pexa-supply = <&ldo1_reg>; + vdd-pexa-supply = <&ldo1_reg>; + avdd-pexb-supply = <&ldo1_reg>; + vdd-pexb-supply = <&ldo1_reg>; + avdd-pex-pll-supply = <&ldo1_reg>; + avdd-plle-supply = <&ldo1_reg>; + vddio-pex-ctl-supply = <&sys_3v3_reg>; + hvdd-pex-supply = <&sys_3v3_pexs_reg>; pci@1,0 { status = "okay"; diff --git a/dts/src/arm/tegra30-cardhu.dtsi b/dts/src/arm/tegra30-cardhu.dtsi index 0cf0848a82..2063795462 100644 --- a/dts/src/arm/tegra30-cardhu.dtsi +++ b/dts/src/arm/tegra30-cardhu.dtsi @@ -38,9 +38,14 @@ pcie-controller@00003000 { status = "okay"; - pex-clk-supply = <&pex_hvdd_3v3_reg>; - vdd-supply = <&ldo1_reg>; - avdd-supply = <&ldo2_reg>; + + /* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */ + avdd-pexb-supply = <&ldo1_reg>; + vdd-pexb-supply = <&ldo1_reg>; + avdd-pex-pll-supply = <&ldo1_reg>; + hvdd-pex-supply = <&pex_hvdd_3v3_reg>; + vddio-pex-ctl-supply = <&sys_3v3_reg>; + avdd-plle-supply = <&ldo2_reg>; pci@1,0 { nvidia,num-lanes = <4>; diff --git a/dts/src/arm/tegra30.dtsi b/dts/src/arm/tegra30.dtsi index dec4fc8239..6b35c29278 100644 --- a/dts/src/arm/tegra30.dtsi +++ b/dts/src/arm/tegra30.dtsi @@ -335,6 +335,12 @@ interrupt-controller; }; + apbmisc@70000800 { + compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc"; + reg = <0x70000800 0x64 /* Chip revision */ + 0x70000008 0x04>; /* Strapping options */ + }; + pinmux: pinmux@70000868 { compatible = "nvidia,tegra30-pinmux"; reg = <0x70000868 0xd4 /* Pad control registers */ @@ -631,6 +637,15 @@ nvidia,ahb = <&ahb>; }; + fuse@7000f800 { + compatible = "nvidia,tegra30-efuse"; + reg = <0x7000f800 0x400>; + clocks = <&tegra_car TEGRA30_CLK_FUSE>; + clock-names = "fuse"; + resets = <&tegra_car 39>; + reset-names = "fuse"; + }; + ahub@70080000 { compatible = "nvidia,tegra30-ahub"; reg = <0x70080000 0x200 @@ -775,6 +790,8 @@ <&tegra_car TEGRA30_CLK_PLL_U>, <&tegra_car TEGRA30_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -786,6 +803,7 @@ nvidia,xcvr-hsslew = <32>; nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -809,6 +827,8 @@ <&tegra_car TEGRA30_CLK_PLL_U>, <&tegra_car TEGRA30_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 58>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -843,6 +863,8 @@ <&tegra_car TEGRA30_CLK_PLL_U>, <&tegra_car TEGRA30_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/dts/src/arm/tny_a9260_common.dtsi b/dts/src/arm/tny_a9260_common.dtsi index 0e6d3de2e0..ce7138c3af 100644 --- a/dts/src/arm/tny_a9260_common.dtsi +++ b/dts/src/arm/tny_a9260_common.dtsi @@ -24,6 +24,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/dts/src/arm/tny_a9263.dts b/dts/src/arm/tny_a9263.dts index 0751a6a979..3043296345 100644 --- a/dts/src/arm/tny_a9263.dts +++ b/dts/src/arm/tny_a9263.dts @@ -29,6 +29,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/dts/src/arm/usb_a9260_common.dtsi b/dts/src/arm/usb_a9260_common.dtsi index 285977682c..12edafefd4 100644 --- a/dts/src/arm/usb_a9260_common.dtsi +++ b/dts/src/arm/usb_a9260_common.dtsi @@ -16,6 +16,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/dts/src/arm/usb_a9263.dts b/dts/src/arm/usb_a9263.dts index 290e60383b..68c0de36c3 100644 --- a/dts/src/arm/usb_a9263.dts +++ b/dts/src/arm/usb_a9263.dts @@ -29,6 +29,14 @@ compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/dts/src/arm/versatile-ab.dts b/dts/src/arm/versatile-ab.dts index e01e5a081d..27d0d9c8ad 100644 --- a/dts/src/arm/versatile-ab.dts +++ b/dts/src/arm/versatile-ab.dts @@ -15,10 +15,49 @@ i2c0 = &i2c0; }; + chosen { + stdout-path = &uart0; + }; + memory { reg = <0x0 0x08000000>; }; + xtal24mhz: xtal24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + core-module@10000000 { + compatible = "arm,core-module-versatile", "syscon"; + reg = <0x10000000 0x200>; + + /* OSC1 on AB, OSC4 on PB */ + osc1: cm_aux_osc@24M { + #clock-cells = <0>; + compatible = "arm,versatile-cm-auxosc"; + clocks = <&xtal24mhz>; + }; + + /* The timer clock is the 24 MHz oscillator divided to 1MHz */ + timclk: timclk@1M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + pclk: pclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + }; + flash@34000000 { compatible = "arm,versatile-flash"; reg = <0x34000000 0x4000000>; @@ -59,6 +98,8 @@ interrupt-controller; #interrupt-cells = <1>; reg = <0x10140000 0x1000>; + clear-mask = <0xffffffff>; + valid-mask = <0xffffffff>; }; sic: intc@10003000 { @@ -68,69 +109,93 @@ reg = <0x10003000 0x1000>; interrupt-parent = <&vic>; interrupts = <31>; /* Cascaded to vic */ + clear-mask = <0xffffffff>; + valid-mask = <0xffc203f8>; }; dma@10130000 { compatible = "arm,pl081", "arm,primecell"; reg = <0x10130000 0x1000>; interrupts = <17>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; uart0: uart@101f1000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x101f1000 0x1000>; interrupts = <12>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; uart1: uart@101f2000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x101f2000 0x1000>; interrupts = <13>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; uart2: uart@101f3000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x101f3000 0x1000>; interrupts = <14>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; smc@10100000 { compatible = "arm,primecell"; reg = <0x10100000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; mpmc@10110000 { compatible = "arm,primecell"; reg = <0x10110000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; display@10120000 { compatible = "arm,pl110", "arm,primecell"; reg = <0x10120000 0x1000>; interrupts = <16>; + clocks = <&osc1>, <&pclk>; + clock-names = "clcd", "apb_pclk"; }; sctl@101e0000 { compatible = "arm,primecell"; reg = <0x101e0000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; watchdog@101e1000 { compatible = "arm,primecell"; reg = <0x101e1000 0x1000>; interrupts = <0>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; timer@101e2000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x101e2000 0x1000>; interrupts = <4>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer0", "timer1", "apb_pclk"; }; timer@101e3000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x101e3000 0x1000>; interrupts = <5>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer0", "timer1", "apb_pclk"; }; gpio0: gpio@101e4000 { @@ -141,6 +206,8 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpio1: gpio@101e5000 { @@ -151,24 +218,32 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; rtc@101e8000 { compatible = "arm,pl030", "arm,primecell"; reg = <0x101e8000 0x1000>; interrupts = <10>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; sci@101f0000 { compatible = "arm,primecell"; reg = <0x101f0000 0x1000>; interrupts = <15>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; ssp@101f4000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x101f4000 0x1000>; interrupts = <11>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "SSPCLK", "apb_pclk"; }; fpga { @@ -181,23 +256,31 @@ compatible = "arm,primecell"; reg = <0x4000 0x1000>; interrupts = <24>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; mmc@5000 { - compatible = "arm,primecell"; + compatible = "arm,pl180", "arm,primecell"; reg = < 0x5000 0x1000>; interrupts-extended = <&vic 22 &sic 2>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "mclk", "apb_pclk"; }; kmi@6000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x6000 0x1000>; interrupt-parent = <&sic>; interrupts = <3>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; kmi@7000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x7000 0x1000>; interrupt-parent = <&sic>; interrupts = <4>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; }; }; diff --git a/dts/src/arm/versatile-pb.dts b/dts/src/arm/versatile-pb.dts index 65f6577113..e36c1e82fe 100644 --- a/dts/src/arm/versatile-pb.dts +++ b/dts/src/arm/versatile-pb.dts @@ -13,6 +13,8 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpio3: gpio@101e7000 { @@ -23,6 +25,8 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; fpga { @@ -31,20 +35,24 @@ reg = <0x9000 0x1000>; interrupt-parent = <&sic>; interrupts = <6>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; sci@a000 { compatible = "arm,primecell"; reg = <0xa000 0x1000>; interrupt-parent = <&sic>; interrupts = <5>; + clocks = <&xtal24mhz>; + clock-names = "apb_pclk"; }; mmc@b000 { - compatible = "arm,primecell"; + compatible = "arm,pl180", "arm,primecell"; reg = <0xb000 0x1000>; interrupts-extended = <&vic 23 &sic 2>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "mclk", "apb_pclk"; }; }; }; }; - -#include <testcases.dtsi> diff --git a/dts/src/arm/vf610.dtsi b/dts/src/arm/vf610.dtsi index 6cc314e7b8..583dd363c9 100644 --- a/dts/src/arm/vf610.dtsi +++ b/dts/src/arm/vf610.dtsi @@ -14,6 +14,8 @@ / { aliases { + can0 = &can0; + can1 = &can1; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -103,6 +105,16 @@ <&clks VF610_CLK_DMAMUX1>; }; + can0: flexcan@40020000 { + compatible = "fsl,vf610-flexcan"; + reg = <0x40020000 0x4000>; + interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_FLEXCAN0>, + <&clks VF610_CLK_FLEXCAN0>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + uart0: serial@40027000 { compatible = "fsl,vf610-lpuart"; reg = <0x40027000 0x1000>; @@ -362,7 +374,7 @@ esdhc1: esdhc@400b2000 { compatible = "fsl,imx53-esdhc"; - reg = <0x400b2000 0x4000>; + reg = <0x400b2000 0x1000>; interrupts = <0 28 0x04>; clocks = <&clks VF610_CLK_IPG_BUS>, <&clks VF610_CLK_PLATFORM_BUS>, @@ -405,6 +417,17 @@ clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; + + can1: flexcan@400d4000 { + compatible = "fsl,vf610-flexcan"; + reg = <0x400d4000 0x4000>; + interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_FLEXCAN1>, + <&clks VF610_CLK_FLEXCAN1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; }; }; diff --git a/dts/src/arm/zynq-7000.dtsi b/dts/src/arm/zynq-7000.dtsi index 760bbc463c..6cc83d4c6c 100644 --- a/dts/src/arm/zynq-7000.dtsi +++ b/dts/src/arm/zynq-7000.dtsi @@ -65,6 +65,48 @@ interrupt-parent = <&intc>; ranges; + adc@f8007100 { + compatible = "xlnx,zynq-xadc-1.00.a"; + reg = <0xf8007100 0x20>; + interrupts = <0 7 4>; + interrupt-parent = <&intc>; + clocks = <&clkc 12>; + }; + + can0: can@e0008000 { + compatible = "xlnx,zynq-can-1.0"; + status = "disabled"; + clocks = <&clkc 19>, <&clkc 36>; + clock-names = "can_clk", "pclk"; + reg = <0xe0008000 0x1000>; + interrupts = <0 28 4>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + can1: can@e0009000 { + compatible = "xlnx,zynq-can-1.0"; + status = "disabled"; + clocks = <&clkc 20>, <&clkc 37>; + clock-names = "can_clk", "pclk"; + reg = <0xe0009000 0x1000>; + interrupts = <0 51 4>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + gpio0: gpio@e000a000 { + compatible = "xlnx,zynq-gpio-1.0"; + #gpio-cells = <2>; + clocks = <&clkc 42>; + gpio-controller; + interrupt-parent = <&intc>; + interrupts = <0 20 4>; + reg = <0xe000a000 0x1000>; + }; + i2c0: i2c@e0004000 { compatible = "cdns,i2c-r1p10"; status = "disabled"; @@ -105,23 +147,47 @@ }; uart0: serial@e0000000 { - compatible = "xlnx,xuartps"; + compatible = "xlnx,xuartps", "cdns,uart-r1p8"; status = "disabled"; clocks = <&clkc 23>, <&clkc 40>; - clock-names = "ref_clk", "aper_clk"; + clock-names = "uart_clk", "pclk"; reg = <0xE0000000 0x1000>; interrupts = <0 27 4>; }; uart1: serial@e0001000 { - compatible = "xlnx,xuartps"; + compatible = "xlnx,xuartps", "cdns,uart-r1p8"; status = "disabled"; clocks = <&clkc 24>, <&clkc 41>; - clock-names = "ref_clk", "aper_clk"; + clock-names = "uart_clk", "pclk"; reg = <0xE0001000 0x1000>; interrupts = <0 50 4>; }; + spi0: spi@e0006000 { + compatible = "xlnx,zynq-spi-r1p6"; + reg = <0xe0006000 0x1000>; + status = "disabled"; + interrupt-parent = <&intc>; + interrupts = <0 26 4>; + clocks = <&clkc 25>, <&clkc 34>; + clock-names = "ref_clk", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@e0007000 { + compatible = "xlnx,zynq-spi-r1p6"; + reg = <0xe0007000 0x1000>; + status = "disabled"; + interrupt-parent = <&intc>; + interrupts = <0 49 4>; + clocks = <&clkc 26>, <&clkc 35>; + clock-names = "ref_clk", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + }; + gem0: ethernet@e000b000 { compatible = "cdns,gem"; reg = <0xe000b000 0x4000>; @@ -186,6 +252,22 @@ }; }; + dmac_s: dmac@f8003000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xf8003000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <0 13 4>, + <0 14 4>, <0 15 4>, + <0 16 4>, <0 17 4>, + <0 40 4>, <0 41 4>, + <0 42 4>, <0 43 4>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <4>; + clocks = <&clkc 27>; + clock-names = "apb_pclk"; + }; + devcfg: devcfg@f8007000 { compatible = "xlnx,zynq-devcfg-1.0"; reg = <0xf8007000 0x100>; diff --git a/dts/src/arm/zynq-parallella.dts b/dts/src/arm/zynq-parallella.dts new file mode 100644 index 0000000000..41afd9da68 --- /dev/null +++ b/dts/src/arm/zynq-parallella.dts @@ -0,0 +1,64 @@ +/* + * Copyright (c) 2014 SUSE LINUX Products GmbH + * + * Derived from zynq-zed.dts: + * + * Copyright (C) 2011 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * Copyright (C) 2013 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Adapteva Parallella Board"; + compatible = "adapteva,parallella", "xlnx,zynq-7000"; + + memory { + device_type = "memory"; + reg = <0 0x40000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"; + linux,stdout-path = "/amba/serial@e0001000"; + }; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet_phy: ethernet-phy@0 { + /* Marvell 88E1318 */ + compatible = "ethernet-phy-id0141.0e90", + "ethernet-phy-ieee802.3-c22"; + reg = <0>; + marvell,reg-init = <0x3 0x10 0xff00 0x1e>, + <0x3 0x11 0xfff0 0xa>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&sdhci1 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/dts/src/arm/zynq-zc702.dts b/dts/src/arm/zynq-zc702.dts index 5e09cee33d..835c3089c6 100644 --- a/dts/src/arm/zynq-zc702.dts +++ b/dts/src/arm/zynq-zc702.dts @@ -29,6 +29,10 @@ }; +&can0 { + status = "okay"; +}; + &gem0 { status = "okay"; phy-mode = "rgmii"; diff --git a/dts/src/arm64/apm-mustang.dts b/dts/src/arm64/apm-mustang.dts index 6541962f5d..b2f56229aa 100644 --- a/dts/src/arm64/apm-mustang.dts +++ b/dts/src/arm64/apm-mustang.dts @@ -28,3 +28,7 @@ &serial0 { status = "ok"; }; + +&menet { + status = "ok"; +}; diff --git a/dts/src/arm64/apm-storm.dtsi b/dts/src/arm64/apm-storm.dtsi index 40aa96ce13..c0aceef7f5 100644 --- a/dts/src/arm64/apm-storm.dtsi +++ b/dts/src/arm64/apm-storm.dtsi @@ -167,14 +167,13 @@ clock-output-names = "ethclk"; }; - eth8clk: eth8clk { + menetclk: menetclk { compatible = "apm,xgene-device-clock"; #clock-cells = <1>; clocks = <ðclk 0>; - clock-names = "eth8clk"; reg = <0x0 0x1702C000 0x0 0x1000>; reg-names = "csr-reg"; - clock-output-names = "eth8clk"; + clock-output-names = "menetclk"; }; sataphy1clk: sataphy1clk@1f21c000 { @@ -397,5 +396,30 @@ #clock-cells = <1>; clocks = <&rtcclk 0>; }; + + menet: ethernet@17020000 { + compatible = "apm,xgene-enet"; + status = "disabled"; + reg = <0x0 0x17020000 0x0 0xd100>, + <0x0 0X17030000 0x0 0X400>, + <0x0 0X10000000 0x0 0X200>; + reg-names = "enet_csr", "ring_csr", "ring_cmd"; + interrupts = <0x0 0x3c 0x4>; + dma-coherent; + clocks = <&menetclk 0>; + local-mac-address = [00 01 73 00 00 01]; + phy-connection-type = "rgmii"; + phy-handle = <&menetphy>; + mdio { + compatible = "apm,xgene-mdio"; + #address-cells = <1>; + #size-cells = <0>; + menetphy: menetphy@3 { + compatible = "ethernet-phy-id001c.c915"; + reg = <0x3>; + }; + + }; + }; }; }; diff --git a/dts/src/powerpc/fsl/p2041si-post.dtsi b/dts/src/powerpc/fsl/p2041si-post.dtsi index 5290df83ff..69ce1026c9 100644 --- a/dts/src/powerpc/fsl/p2041si-post.dtsi +++ b/dts/src/powerpc/fsl/p2041si-post.dtsi @@ -359,6 +359,7 @@ compatible = "fsl,qoriq-core-mux-1.0"; clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux2"; }; mux3: mux3@60 { diff --git a/dts/src/powerpc/fsl/qoriq-sec6.0-0.dtsi b/dts/src/powerpc/fsl/qoriq-sec6.0-0.dtsi index f75b4f820c..7d4a6a2354 100644 --- a/dts/src/powerpc/fsl/qoriq-sec6.0-0.dtsi +++ b/dts/src/powerpc/fsl/qoriq-sec6.0-0.dtsi @@ -32,7 +32,8 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ - compatible = "fsl,sec-v6.0"; + compatible = "fsl,sec-v6.0", "fsl,sec-v5.0", + "fsl,sec-v4.0"; fsl,sec-era = <6>; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/powerpc/fsl/t2080si-post.dtsi b/dts/src/powerpc/fsl/t2080si-post.dtsi new file mode 100644 index 0000000000..082ec20440 --- /dev/null +++ b/dts/src/powerpc/fsl/t2080si-post.dtsi @@ -0,0 +1,69 @@ +/* + * T2080 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t2081si-post.dtsi" + +&soc { +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + +/include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; diff --git a/dts/src/powerpc/fsl/t2081si-post.dtsi b/dts/src/powerpc/fsl/t2081si-post.dtsi new file mode 100644 index 0000000000..97479f0ce6 --- /dev/null +++ b/dts/src/powerpc/fsl/t2081si-post.dtsi @@ -0,0 +1,435 @@ +/* + * T2081 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + interrupts = <25 2 0 0>; +}; + +/* controller at 0x240000 */ +&pci0 { + compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <20 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <20 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x250000 */ +&pci1 { + compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + interrupts = <21 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <21 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x260000 */ +&pci2 { + compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <22 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <22 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +/* controller at 0x270000 */ +&pci3 { + compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <23 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <23 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,t2080-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0 + 94 2 0 0 + 95 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,t2080-dcsr-cnpc", "fsl,dcsr-cnpc"; + reg = <0x1000 0x1000 0x1002000 0x10000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0x1A000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,t2080-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,t2080-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,t2080-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-snpc@30000 { + compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x30000 0x1000 0x1022000 0x10000>; + }; + dcsr-snpc@31000 { + compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x31000 0x1000 0x1042000 0x10000>; + }; + dcsr-snpc@32000 { + compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x32000 0x1000 0x1062000 0x10000>; + }; + dcsr-cpu-sb-proxy@100000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x100000 0x1000 0x101000 0x1000>; + }; + dcsr-cpu-sb-proxy@108000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x108000 0x1000 0x109000 0x1000>; + }; + dcsr-cpu-sb-proxy@110000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x110000 0x1000 0x111000 0x1000>; + }; + dcsr-cpu-sb-proxy@118000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x118000 0x1000 0x119000 0x1000>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.7", + "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,t2080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000 + 0x12000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26 + 16 2 1 25>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x3000>; + fsl,portid-mapping = <0x8000>; + ranges = <0 0x20000 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + }; + +/include/ "qoriq-mpic4.3.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,t2080-device-config", "fsl,qoriq-device-config-2.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + fsl,liodn-bits = <12>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0"; + ranges = <0x0 0xe1000 0x1000>; + reg = <0xe1000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-2.0"; + clock-output-names = "sysclk", "fixed-clock"; + }; + + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2", "pll0-div4"; + }; + + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2", "pll1-div4"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll1-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll1-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux1"; + }; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,t2080-rcpm", "fsl,qoriq-rcpm-2.0"; + reg = <0xe2000 0x1000>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,t2080-sfp"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,t2080-serdes"; + reg = <0xea000 0x4000>; + }; + +/include/ "elo3-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; +/include/ "elo3-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; +/include/ "elo3-dma-2.dtsi" + dma@102300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x588>; /* DMA3LIODNR */ + }; + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + compatible = "fsl,t2080-esdhc", "fsl,esdhc"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* SDMMCLIODNR */ + sdhci,auto-cmd12; + }; +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-gpio-1.dtsi" +/include/ "qoriq-gpio-2.dtsi" +/include/ "qoriq-gpio-3.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB1LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; +/include/ "qoriq-sec5.2-0.dtsi" + + L2_1: l2-cache-controller@c20000 { + /* Cluster 0 L2 cache */ + compatible = "fsl,t2080-l2-cache-controller"; + reg = <0xc20000 0x40000>; + next-level-cache = <&cpc>; + }; +}; diff --git a/dts/src/powerpc/fsl/t208xsi-pre.dtsi b/dts/src/powerpc/fsl/t208xsi-pre.dtsi new file mode 100644 index 0000000000..e71ceb0e11 --- /dev/null +++ b/dts/src/powerpc/fsl/t208xsi-pre.dtsi @@ -0,0 +1,99 @@ +/* + * T2080/T2081 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e6500_power_isa.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + + crypto = &crypto; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + dma2 = &dma2; + sdhc = &sdhc; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e6500@0 { + device_type = "cpu"; + reg = <0 1>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu1: PowerPC,e6500@2 { + device_type = "cpu"; + reg = <2 3>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu2: PowerPC,e6500@4 { + device_type = "cpu"; + reg = <4 5>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu3: PowerPC,e6500@6 { + device_type = "cpu"; + reg = <6 7>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + }; +}; diff --git a/dts/src/powerpc/fsl/t4240si-post.dtsi b/dts/src/powerpc/fsl/t4240si-post.dtsi index 793669baa1..a3d582e036 100644 --- a/dts/src/powerpc/fsl/t4240si-post.dtsi +++ b/dts/src/powerpc/fsl/t4240si-post.dtsi @@ -476,6 +476,7 @@ /include/ "elo3-dma-0.dtsi" /include/ "elo3-dma-1.dtsi" +/include/ "elo3-dma-2.dtsi" /include/ "qoriq-espi-0.dtsi" spi@110000 { diff --git a/dts/src/powerpc/fsl/t4240si-pre.dtsi b/dts/src/powerpc/fsl/t4240si-pre.dtsi index d2f157edbe..261a3abb1a 100644 --- a/dts/src/powerpc/fsl/t4240si-pre.dtsi +++ b/dts/src/powerpc/fsl/t4240si-pre.dtsi @@ -57,6 +57,7 @@ pci3 = &pci3; dma0 = &dma0; dma1 = &dma1; + dma2 = &dma2; sdhc = &sdhc; }; diff --git a/dts/src/powerpc/mpc5121.dtsi b/dts/src/powerpc/mpc5121.dtsi index 2c0e1552d2..7f9d14f5c4 100644 --- a/dts/src/powerpc/mpc5121.dtsi +++ b/dts/src/powerpc/mpc5121.dtsi @@ -498,6 +498,7 @@ compatible = "fsl,mpc5121-dma"; reg = <0x14000 0x1800>; interrupts = <65 0x8>; + #dma-cells = <1>; }; }; diff --git a/dts/src/powerpc/t2080qds.dts b/dts/src/powerpc/t2080qds.dts new file mode 100644 index 0000000000..aa1d6d8c16 --- /dev/null +++ b/dts/src/powerpc/t2080qds.dts @@ -0,0 +1,57 @@ +/* + * T2080QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t208xsi-pre.dtsi" +/include/ "t208xqds.dtsi" + +/ { + model = "fsl,T2080QDS"; + compatible = "fsl,T2080QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "fsl/t2080si-post.dtsi" diff --git a/dts/src/powerpc/t2080rdb.dts b/dts/src/powerpc/t2080rdb.dts new file mode 100644 index 0000000000..e889104760 --- /dev/null +++ b/dts/src/powerpc/t2080rdb.dts @@ -0,0 +1,57 @@ +/* + * T2080PCIe-RDB Board Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t208xsi-pre.dtsi" +/include/ "t208xrdb.dtsi" + +/ { + model = "fsl,T2080RDB"; + compatible = "fsl,T2080RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "fsl/t2080si-post.dtsi" diff --git a/dts/src/powerpc/t2081qds.dts b/dts/src/powerpc/t2081qds.dts new file mode 100644 index 0000000000..8ec80a71e1 --- /dev/null +++ b/dts/src/powerpc/t2081qds.dts @@ -0,0 +1,46 @@ +/* + * T2081QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t208xsi-pre.dtsi" +/include/ "t208xqds.dtsi" + +/ { + model = "fsl,T2081QDS"; + compatible = "fsl,T2081QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; +}; + +/include/ "fsl/t2081si-post.dtsi" diff --git a/dts/src/powerpc/t208xqds.dtsi b/dts/src/powerpc/t208xqds.dtsi new file mode 100644 index 0000000000..555dc6e03d --- /dev/null +++ b/dts/src/powerpc/t208xqds.dtsi @@ -0,0 +1,239 @@ +/* + * T2080/T2081 QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + model = "fsl,T2080QDS"; + compatible = "fsl,T2080QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + boardctrl: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,fpga-qixis"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11"; /* 16MB */ + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040"; + reg = <1>; + spi-max-frequency = <35000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "eon,en25s64"; + reg = <2>; + spi-max-frequency = <35000000>; + }; + }; + + i2c@118000 { + pca9547@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + eeprom@50 { + compatible = "at24,24c512"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "at24,24c02"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "at24,24c02"; + reg = <0x57>; + }; + + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + eeprom@55 { + compatible = "at24,24c02"; + reg = <0x55>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/dts/src/powerpc/t208xrdb.dtsi b/dts/src/powerpc/t208xrdb.dtsi new file mode 100644 index 0000000000..1481e192e7 --- /dev/null +++ b/dts/src/powerpc/t208xrdb.dtsi @@ -0,0 +1,184 @@ +/* + * T2080PCIe-RDB Board Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + model = "fsl,T2080RDB"; + compatible = "fsl,T2080RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + boardctrl: board-control@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,t2080-cpld"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q512a"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clock */ + }; + }; + + i2c@118000 { + adt7481@4c { + compatible = "adi,adt7481"; + reg = <0x4c>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + }; + + i2c@118100 { + pca9546@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/dts/src/powerpc/t4240rdb.dts b/dts/src/powerpc/t4240rdb.dts new file mode 100644 index 0000000000..53761d4e8c --- /dev/null +++ b/dts/src/powerpc/t4240rdb.dts @@ -0,0 +1,186 @@ +/* + * T4240RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t4240si-pre.dtsi" + +/ { + model = "fsl,T4240RDB"; + compatible = "fsl,T4240RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + }; + + i2c@118000 { + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + eeprom@54 { + compatible = "at24,24c256"; + reg = <0x54>; + }; + eeprom@56 { + compatible = "at24,24c256"; + reg = <0x56>; + }; + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "fsl/t4240si-post.dtsi" |