diff options
Diffstat (limited to 'dts')
| -rw-r--r-- | dts/Bindings/mmc/synopsys-dw-mshc.txt | 5 | ||||
| -rw-r--r-- | dts/Bindings/pci/rockchip-pcie.txt | 11 | ||||
| -rw-r--r-- | dts/Bindings/pinctrl/st,stm32-pinctrl.txt | 10 | ||||
| -rw-r--r-- | dts/src/arc/axc001.dtsi | 2 | ||||
| -rw-r--r-- | dts/src/arc/nsim_700.dts | 2 | ||||
| -rw-r--r-- | dts/src/arc/nsimosci.dts | 4 | ||||
| -rw-r--r-- | dts/src/arm64/rockchip/rk3399.dtsi | 7 |
7 files changed, 29 insertions, 12 deletions
diff --git a/dts/Bindings/mmc/synopsys-dw-mshc.txt b/dts/Bindings/mmc/synopsys-dw-mshc.txt index 4e00e859e8..bfa461aaac 100644 --- a/dts/Bindings/mmc/synopsys-dw-mshc.txt +++ b/dts/Bindings/mmc/synopsys-dw-mshc.txt @@ -43,6 +43,9 @@ Optional properties: reset signal present internally in some host controller IC designs. See Documentation/devicetree/bindings/reset/reset.txt for details. +* reset-names: request name for using "resets" property. Must be "reset". + (It will be used together with "resets" property.) + * clocks: from common clock binding: handle to biu and ciu clocks for the bus interface unit clock and the card interface unit clock. @@ -103,6 +106,8 @@ board specific portions as listed below. interrupts = <0 75 0>; #address-cells = <1>; #size-cells = <0>; + resets = <&rst 20>; + reset-names = "reset"; }; [board specific internal DMA resources] diff --git a/dts/Bindings/pci/rockchip-pcie.txt b/dts/Bindings/pci/rockchip-pcie.txt index ba67b39939..71aeda1ca0 100644 --- a/dts/Bindings/pci/rockchip-pcie.txt +++ b/dts/Bindings/pci/rockchip-pcie.txt @@ -26,13 +26,16 @@ Required properties: - "sys" - "legacy" - "client" -- resets: Must contain five entries for each entry in reset-names. +- resets: Must contain seven entries for each entry in reset-names. See ../reset/reset.txt for details. - reset-names: Must include the following names - "core" - "mgmt" - "mgmt-sticky" - "pipe" + - "pm" + - "aclk" + - "pclk" - pinctrl-names : The pin control state names - pinctrl-0: The "default" pinctrl state - #interrupt-cells: specifies the number of cells needed to encode an @@ -86,8 +89,10 @@ pcie0: pcie@f8000000 { reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>; reg-names = "axi-base", "apb-base"; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe"; + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> , + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; phys = <&pcie_phy>; phy-names = "pcie-phy"; pinctrl-names = "default"; diff --git a/dts/Bindings/pinctrl/st,stm32-pinctrl.txt b/dts/Bindings/pinctrl/st,stm32-pinctrl.txt index f9753c4169..b24583aa34 100644 --- a/dts/Bindings/pinctrl/st,stm32-pinctrl.txt +++ b/dts/Bindings/pinctrl/st,stm32-pinctrl.txt @@ -14,11 +14,6 @@ Required properies: - #size-cells : The value of this property must be 1 - ranges : defines mapping between pin controller node (parent) to gpio-bank node (children). - - interrupt-parent: phandle of the interrupt parent to which the external - GPIO interrupts are forwarded to. - - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node - which includes IRQ mux selection register, and the offset of the IRQ mux - selection register. - pins-are-numbered: Specify the subnodes are using numbered pinmux to specify pins. @@ -37,6 +32,11 @@ Required properties: Optional properties: - reset: : Reference to the reset controller + - interrupt-parent: phandle of the interrupt parent to which the external + GPIO interrupts are forwarded to. + - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node + which includes IRQ mux selection register, and the offset of the IRQ mux + selection register. Example: #include <dt-bindings/pinctrl/stm32f429-pinfunc.h> diff --git a/dts/src/arc/axc001.dtsi b/dts/src/arc/axc001.dtsi index 6ae2c476ad..53ce226f77 100644 --- a/dts/src/arc/axc001.dtsi +++ b/dts/src/arc/axc001.dtsi @@ -71,7 +71,7 @@ reg-io-width = <4>; }; - arcpmu0: pmu { + arcpct0: pct { compatible = "snps,arc700-pct"; }; }; diff --git a/dts/src/arc/nsim_700.dts b/dts/src/arc/nsim_700.dts index ce0ccd20b5..5ee96b067c 100644 --- a/dts/src/arc/nsim_700.dts +++ b/dts/src/arc/nsim_700.dts @@ -69,7 +69,7 @@ }; }; - arcpmu0: pmu { + arcpct0: pct { compatible = "snps,arc700-pct"; }; }; diff --git a/dts/src/arc/nsimosci.dts b/dts/src/arc/nsimosci.dts index bcf603142a..3c391ba565 100644 --- a/dts/src/arc/nsimosci.dts +++ b/dts/src/arc/nsimosci.dts @@ -83,5 +83,9 @@ reg = <0xf0003000 0x44>; interrupts = <7>; }; + + arcpct0: pct { + compatible = "snps,arc700-pct"; + }; }; }; diff --git a/dts/src/arm64/rockchip/rk3399.dtsi b/dts/src/arm64/rockchip/rk3399.dtsi index b65c193dc6..7afbfb0f96 100644 --- a/dts/src/arm64/rockchip/rk3399.dtsi +++ b/dts/src/arm64/rockchip/rk3399.dtsi @@ -300,8 +300,11 @@ ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe"; + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, + <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; status = "disabled"; pcie0_intc: interrupt-controller { |