summaryrefslogtreecommitdiffstats
path: root/dts
diff options
context:
space:
mode:
Diffstat (limited to 'dts')
-rw-r--r--dts/Bindings/arm/arm,scpi.txt2
-rw-r--r--dts/Bindings/arm/bcm/brcm,bcm2835.txt4
-rw-r--r--dts/Bindings/arm/bcm/brcm,bcm4708.txt7
-rw-r--r--dts/Bindings/arm/bcm/brcm,nsp-cpu-method.txt39
-rw-r--r--dts/Bindings/arm/compulab-boards.txt25
-rw-r--r--dts/Bindings/arm/cpus.txt21
-rw-r--r--dts/Bindings/arm/fsl.txt4
-rw-r--r--dts/Bindings/arm/hisilicon/hisilicon.txt16
-rw-r--r--dts/Bindings/arm/l2c2x0.txt (renamed from dts/Bindings/arm/l2cc.txt)24
-rw-r--r--dts/Bindings/arm/marvell,kirkwood.txt2
-rw-r--r--dts/Bindings/arm/mediatek.txt4
-rw-r--r--dts/Bindings/arm/mediatek/mediatek,infracfg.txt2
-rw-r--r--dts/Bindings/arm/mediatek/mediatek,pericfg.txt2
-rw-r--r--dts/Bindings/arm/omap/omap.txt18
-rw-r--r--dts/Bindings/arm/pmu.txt5
-rw-r--r--dts/Bindings/arm/psci.txt25
-rw-r--r--dts/Bindings/arm/rockchip.txt26
-rw-r--r--dts/Bindings/arm/samsung/exynos-adc.txt3
-rw-r--r--dts/Bindings/arm/scu.txt3
-rw-r--r--dts/Bindings/arm/secure.txt53
-rw-r--r--dts/Bindings/arm/shmobile.txt4
-rw-r--r--dts/Bindings/arm/technologic.txt6
-rw-r--r--dts/Bindings/ata/brcm,sata-brcmstb.txt4
-rw-r--r--dts/Bindings/ata/sata_rcar.txt1
-rw-r--r--dts/Bindings/bus/uniphier-system-bus.txt66
-rw-r--r--dts/Bindings/clock/arm-syscon-icst.txt40
-rw-r--r--dts/Bindings/clock/brcm,bcm2835-aux-clock.txt31
-rw-r--r--dts/Bindings/clock/brcm,iproc-clocks.txt5
-rw-r--r--dts/Bindings/clock/cs2000-cp.txt22
-rw-r--r--dts/Bindings/clock/dove-divider-clock.txt28
-rw-r--r--dts/Bindings/clock/nvidia,tegra210-car.txt56
-rw-r--r--dts/Bindings/clock/nxp,lpc3220-clk.txt30
-rw-r--r--dts/Bindings/clock/nxp,lpc3220-usb-clk.txt22
-rw-r--r--dts/Bindings/clock/qcom,gcc.txt1
-rw-r--r--dts/Bindings/clock/qcom,mmcc.txt1
-rw-r--r--dts/Bindings/clock/renesas,cpg-div6-clocks.txt4
-rw-r--r--dts/Bindings/clock/renesas,h8300-div-clock.txt2
-rw-r--r--dts/Bindings/clock/rockchip,rk3036-cru.txt56
-rw-r--r--dts/Bindings/clock/rockchip,rk3228-cru.txt58
-rw-r--r--dts/Bindings/clock/samsung,s2mps11.txt49
-rw-r--r--dts/Bindings/clock/sunxi.txt10
-rw-r--r--dts/Bindings/clock/tango4-clock.txt23
-rw-r--r--dts/Bindings/cpufreq/arm_big_little_dt.txt2
-rw-r--r--dts/Bindings/cpufreq/cpufreq-dt.txt2
-rw-r--r--dts/Bindings/cpufreq/cpufreq-st.txt91
-rw-r--r--dts/Bindings/crypto/rockchip-crypto.txt29
-rw-r--r--dts/Bindings/display/bridge/tda998x.txt4
-rw-r--r--dts/Bindings/display/etnaviv/etnaviv-drm.txt54
-rw-r--r--dts/Bindings/display/exynos/exynos_dp.txt41
-rw-r--r--dts/Bindings/display/exynos/exynos_hdmi.txt7
-rw-r--r--dts/Bindings/display/msm/dsi.txt12
-rw-r--r--dts/Bindings/display/msm/mdp.txt26
-rw-r--r--dts/Bindings/display/panel/boe,tv080wum-nl0.txt7
-rw-r--r--dts/Bindings/display/panel/innolux,g121x1-l03.txt7
-rw-r--r--dts/Bindings/display/panel/kyo,tcg121xglp.txt7
-rw-r--r--dts/Bindings/display/panel/panasonic,vvx10f034n00.txt20
-rw-r--r--dts/Bindings/display/panel/qiaodian,qd43003c0-40.txt7
-rw-r--r--dts/Bindings/display/panel/sharp,ls043t1le01.txt22
-rw-r--r--dts/Bindings/display/panel/startek,startek-kd050c.txt4
-rw-r--r--dts/Bindings/display/rockchip/dw_mipi_dsi_rockchip.txt60
-rw-r--r--dts/Bindings/display/rockchip/rockchip-vop.txt1
-rw-r--r--dts/Bindings/display/simple-framebuffer.txt13
-rw-r--r--dts/Bindings/dma/renesas,rcar-dmac.txt13
-rw-r--r--dts/Bindings/dma/renesas,usb-dmac.txt10
-rw-r--r--dts/Bindings/dma/stm32-dma.txt82
-rw-r--r--dts/Bindings/dma/ti-dma-crossbar.txt6
-rw-r--r--dts/Bindings/eeprom/eeprom.txt21
-rw-r--r--dts/Bindings/extcon/extcon-arizona.txt60
-rw-r--r--dts/Bindings/extcon/extcon-max3355.txt21
-rw-r--r--dts/Bindings/gpio/gpio-pca953x.txt1
-rw-r--r--dts/Bindings/gpio/gpio-sx150x.txt3
-rw-r--r--dts/Bindings/gpio/gpio-tps65086.txt16
-rw-r--r--dts/Bindings/gpio/snps-dwapb-gpio.txt2
-rw-r--r--dts/Bindings/i2c/i2c-at91.txt5
-rw-r--r--dts/Bindings/i2c/i2c-brcmstb.txt2
-rw-r--r--dts/Bindings/i2c/i2c-rcar.txt4
-rw-r--r--dts/Bindings/i2c/i2c.txt36
-rw-r--r--dts/Bindings/i2c/trivial-devices.txt16
-rw-r--r--dts/Bindings/iio/accel/mma8452.txt6
-rw-r--r--dts/Bindings/iio/adc/imx7d-adc.txt22
-rw-r--r--dts/Bindings/iio/adc/mcp320x.txt30
-rw-r--r--dts/Bindings/iio/adc/mcp3422.txt3
-rw-r--r--dts/Bindings/iio/adc/palmas-gpadc.txt48
-rw-r--r--dts/Bindings/iio/adc/ti-adc128s052.txt4
-rw-r--r--dts/Bindings/iio/adc/ti-ads8688.txt20
-rw-r--r--dts/Bindings/iio/health/max30100.txt21
-rw-r--r--dts/Bindings/iio/light/us5182d.txt11
-rw-r--r--dts/Bindings/iio/st-sensors.txt1
-rw-r--r--dts/Bindings/input/gpio-keys.txt1
-rw-r--r--dts/Bindings/input/touchscreen/goodix.txt14
-rw-r--r--dts/Bindings/input/touchscreen/pixcir_i2c_ts.txt4
-rw-r--r--dts/Bindings/input/touchscreen/ts4800-ts.txt11
-rw-r--r--dts/Bindings/interrupt-controller/allwinner,sunxi-nmi.txt (renamed from dts/Bindings/interrupt-controller/allwinner,sun67i-sc-nmi.txt)2
-rw-r--r--dts/Bindings/interrupt-controller/arm,gic.txt1
-rw-r--r--dts/Bindings/interrupt-controller/hisilicon,mbigen-v2.txt74
-rw-r--r--dts/Bindings/interrupt-controller/mediatek,sysirq.txt1
-rw-r--r--dts/Bindings/interrupt-controller/microchip,pic32-evic.txt67
-rw-r--r--dts/Bindings/interrupt-controller/qca,ath79-misc-intc.txt2
-rw-r--r--dts/Bindings/interrupt-controller/technologic,ts4800.txt16
-rw-r--r--dts/Bindings/iommu/renesas,ipmmu-vmsa.txt12
-rw-r--r--dts/Bindings/media/exynos5-gsc.txt4
-rw-r--r--dts/Bindings/media/i2c/adp1653.txt7
-rw-r--r--dts/Bindings/media/stih407-c8sectpfe.txt20
-rw-r--r--dts/Bindings/memory-controllers/ath79-ddr-controller.txt8
-rw-r--r--dts/Bindings/mfd/arizona.txt24
-rw-r--r--dts/Bindings/mfd/palmas.txt2
-rw-r--r--dts/Bindings/mfd/s2mpa01.txt90
-rw-r--r--dts/Bindings/mfd/s2mps11.txt153
-rw-r--r--dts/Bindings/mfd/samsung,sec-core.txt88
-rw-r--r--dts/Bindings/mfd/syscon.txt4
-rw-r--r--dts/Bindings/mips/pic32/microchip,pic32mzda.txt31
-rw-r--r--dts/Bindings/mmc/renesas,mmcif.txt1
-rw-r--r--dts/Bindings/mtd/brcm,brcmnand.txt32
-rw-r--r--dts/Bindings/mtd/fsl-quadspi.txt3
-rw-r--r--dts/Bindings/mtd/ingenic,jz4780-nand.txt86
-rw-r--r--dts/Bindings/mtd/jedec,spi-nor.txt56
-rw-r--r--dts/Bindings/mtd/mtk-quadspi.txt41
-rw-r--r--dts/Bindings/mtd/partition.txt2
-rw-r--r--dts/Bindings/net/cdns-emac.txt20
-rw-r--r--dts/Bindings/net/dsa/dsa.txt3
-rw-r--r--dts/Bindings/net/hisilicon-hns-mdio.txt7
-rw-r--r--dts/Bindings/net/ieee802154/adf7242.txt18
-rw-r--r--dts/Bindings/net/macb.txt11
-rw-r--r--dts/Bindings/net/mediatek,mt7620-gsw.txt26
-rw-r--r--dts/Bindings/net/micrel-ksz90x1.txt17
-rw-r--r--dts/Bindings/net/nfc/st95hf.txt50
-rw-r--r--dts/Bindings/net/ralink,rt2880-net.txt61
-rw-r--r--dts/Bindings/net/ralink,rt3050-esw.txt32
-rw-r--r--dts/Bindings/net/renesas,ravb.txt12
-rw-r--r--dts/Bindings/net/socfpga-dwmac.txt2
-rw-r--r--dts/Bindings/net/stmmac.txt25
-rw-r--r--dts/Bindings/opp/opp.txt132
-rw-r--r--dts/Bindings/pci/brcm,iproc-pcie.txt40
-rw-r--r--dts/Bindings/pci/hisilicon-pcie.txt8
-rw-r--r--dts/Bindings/pci/pci-rcar-gen2.txt17
-rw-r--r--dts/Bindings/pci/qcom,pcie.txt233
-rw-r--r--dts/Bindings/pci/rcar-pci.txt14
-rw-r--r--dts/Bindings/phy/brcm,brcmstb-sata-phy.txt1
-rw-r--r--dts/Bindings/phy/phy-ath79-usb.txt18
-rw-r--r--dts/Bindings/phy/phy-hi6220-usb.txt16
-rw-r--r--dts/Bindings/phy/rcar-gen3-phy-usb2.txt39
-rw-r--r--dts/Bindings/phy/rockchip-usb-phy.txt6
-rw-r--r--dts/Bindings/phy/sun4i-usb-phy.txt1
-rw-r--r--dts/Bindings/phy/ti-phy.txt20
-rw-r--r--dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt3
-rw-r--r--dts/Bindings/pinctrl/brcm,iproc-gpio.txt (renamed from dts/Bindings/pinctrl/brcm,cygnus-gpio.txt)9
-rw-r--r--dts/Bindings/pinctrl/brcm,nsp-gpio.txt80
-rw-r--r--dts/Bindings/pinctrl/lantiq,pinctrl-xway.txt110
-rw-r--r--dts/Bindings/pinctrl/pinctrl-mt65xx.txt9
-rw-r--r--dts/Bindings/pinctrl/qcom,msm8996-pinctrl.txt199
-rw-r--r--dts/Bindings/pinctrl/qcom,pmic-gpio.txt2
-rw-r--r--dts/Bindings/pinctrl/qcom,pmic-mpp.txt1
-rw-r--r--dts/Bindings/pinctrl/rockchip,pinctrl.txt3
-rw-r--r--dts/Bindings/pinctrl/samsung-pinctrl.txt1
-rw-r--r--dts/Bindings/pwm/lpc32xx-pwm.txt9
-rw-r--r--dts/Bindings/pwm/pwm-omap-dmtimer.txt18
-rw-r--r--dts/Bindings/regulator/lm363x-regulator.txt34
-rw-r--r--dts/Bindings/regulator/pv88060.txt124
-rw-r--r--dts/Bindings/regulator/pv88090.txt65
-rw-r--r--dts/Bindings/regulator/qcom,smd-rpm-regulator.txt (renamed from dts/Bindings/soc/qcom,smd-rpm.txt)84
-rw-r--r--dts/Bindings/regulator/s5m8767-regulator.txt163
-rw-r--r--dts/Bindings/regulator/samsung,s2mpa01.txt79
-rw-r--r--dts/Bindings/regulator/samsung,s2mps11.txt102
-rw-r--r--dts/Bindings/regulator/samsung,s5m8767.txt145
-rw-r--r--dts/Bindings/regulator/tps65217.txt10
-rw-r--r--dts/Bindings/reset/hisilicon,hi6220-reset.txt34
-rw-r--r--dts/Bindings/scsi/hisilicon-sas.txt69
-rw-r--r--dts/Bindings/serial/8250.txt1
-rw-r--r--dts/Bindings/serial/mtk-uart.txt14
-rw-r--r--dts/Bindings/serial/renesas,sci-serial.txt44
-rw-r--r--dts/Bindings/soc/bcm/raspberrypi,bcm2835-power.txt47
-rw-r--r--dts/Bindings/soc/dove/pmu.txt56
-rw-r--r--dts/Bindings/soc/mediatek/scpsys.txt12
-rw-r--r--dts/Bindings/soc/qcom/qcom,smd-rpm.txt58
-rw-r--r--dts/Bindings/soc/qcom/qcom,smp2p.txt104
-rw-r--r--dts/Bindings/soc/qcom/qcom,smsm.txt104
-rw-r--r--dts/Bindings/soc/ti/wkup_m3_ipc.txt57
-rw-r--r--dts/Bindings/sound/ak4613.txt10
-rw-r--r--dts/Bindings/sound/atmel-classd.txt6
-rw-r--r--dts/Bindings/sound/atmel-pdmic.txt55
-rw-r--r--dts/Bindings/sound/da7218.txt104
-rw-r--r--dts/Bindings/sound/da7219.txt8
-rw-r--r--dts/Bindings/sound/fsl,asrc.txt5
-rw-r--r--dts/Bindings/sound/fsl,esai.txt5
-rw-r--r--dts/Bindings/sound/fsl,spdif.txt5
-rw-r--r--dts/Bindings/sound/img,i2s-in.txt47
-rw-r--r--dts/Bindings/sound/img,i2s-out.txt51
-rw-r--r--dts/Bindings/sound/img,parallel-out.txt44
-rw-r--r--dts/Bindings/sound/img,pistachio-internal-dac.txt18
-rw-r--r--dts/Bindings/sound/img,spdif-in.txt41
-rw-r--r--dts/Bindings/sound/img,spdif-out.txt44
-rw-r--r--dts/Bindings/sound/inno-rk3036.txt20
-rw-r--r--dts/Bindings/sound/pcm179x.txt (renamed from dts/Bindings/sound/pcm1792a.txt)2
-rw-r--r--dts/Bindings/sound/renesas,rsnd.txt82
-rw-r--r--dts/Bindings/sound/renesas,rsrc-card.txt4
-rw-r--r--dts/Bindings/sound/rockchip-i2s.txt2
-rw-r--r--dts/Bindings/sound/rt5616.txt26
-rw-r--r--dts/Bindings/sound/rt5651.txt41
-rw-r--r--dts/Bindings/sound/rt5659.txt75
-rw-r--r--dts/Bindings/sound/rt5677.txt2
-rw-r--r--dts/Bindings/sound/sun4i-codec.txt3
-rw-r--r--dts/Bindings/sound/ti,pcm3168a.txt48
-rw-r--r--dts/Bindings/sound/wlf,wm8974.txt15
-rw-r--r--dts/Bindings/sound/wm8994.txt2
-rw-r--r--dts/Bindings/spi/sh-msiof.txt1
-rw-r--r--dts/Bindings/spi/spi-mt65xx.txt9
-rw-r--r--dts/Bindings/spi/ti_qspi.txt22
-rw-r--r--dts/Bindings/sram/rockchip-pmu-sram.txt (renamed from dts/Bindings/arm/rockchip/pmu-sram.txt)0
-rw-r--r--dts/Bindings/sram/rockchip-smp-sram.txt (renamed from dts/Bindings/arm/rockchip/smp-sram.txt)2
-rw-r--r--dts/Bindings/sram/samsung-sram.txt (renamed from dts/Bindings/arm/exynos/smp-sysram.txt)2
-rw-r--r--dts/Bindings/sram/sram.txt (renamed from dts/Bindings/misc/sram.txt)0
-rw-r--r--dts/Bindings/sram/sunxi-sram.txt (renamed from dts/Bindings/soc/sunxi/sram.txt)2
-rw-r--r--dts/Bindings/staging/ion/hi6220-ion.txt31
-rw-r--r--dts/Bindings/thermal/qoriq-thermal.txt63
-rw-r--r--dts/Bindings/thermal/rockchip-thermal.txt2
-rw-r--r--dts/Bindings/timer/mediatek,mtk-timer.txt1
-rw-r--r--dts/Bindings/usb/dwc2.txt1
-rw-r--r--dts/Bindings/usb/dwc3-xilinx.txt33
-rw-r--r--dts/Bindings/usb/mt8173-xhci.txt51
-rw-r--r--dts/Bindings/usb/octeon-usb.txt62
-rw-r--r--dts/Bindings/usb/renesas_usb3.txt23
-rw-r--r--dts/Bindings/usb/renesas_usbhs.txt22
-rw-r--r--dts/Bindings/usb/usb-xhci.txt4
-rw-r--r--dts/Bindings/usb/usb3503.txt5
-rw-r--r--dts/Bindings/vendor-prefixes.txt8
-rw-r--r--dts/Bindings/watchdog/alphascale-asm9260.txt35
-rw-r--r--dts/Bindings/watchdog/meson-wdt.txt (renamed from dts/Bindings/watchdog/meson6-wdt.txt)2
-rw-r--r--dts/Bindings/watchdog/mt7621-wdt.txt12
-rw-r--r--dts/Bindings/watchdog/mtk-wdt.txt6
-rw-r--r--dts/Bindings/watchdog/sigma,smp8642-wdt.txt18
-rw-r--r--dts/Bindings/watchdog/sp805-wdt.txt31
-rw-r--r--dts/Bindings/watchdog/ts4800-wdt.txt25
-rw-r--r--dts/Bindings/watchdog/ziirave-wdt.txt19
-rw-r--r--dts/include/dt-bindings/clock/bcm2835-aux.h17
-rw-r--r--dts/include/dt-bindings/clock/bcm2835.h3
-rw-r--r--dts/include/dt-bindings/clock/exynos4.h1
-rw-r--r--dts/include/dt-bindings/clock/exynos5420.h4
-rw-r--r--dts/include/dt-bindings/clock/imx7d-clock.h3
-rw-r--r--dts/include/dt-bindings/clock/lpc32xx-clock.h56
-rw-r--r--dts/include/dt-bindings/clock/qcom,gcc-msm8996.h339
-rw-r--r--dts/include/dt-bindings/clock/qcom,mmcc-msm8996.h285
-rw-r--r--dts/include/dt-bindings/clock/r8a7791-clock.h1
-rw-r--r--dts/include/dt-bindings/clock/r8a7794-clock.h1
-rw-r--r--dts/include/dt-bindings/clock/rk3036-cru.h193
-rw-r--r--dts/include/dt-bindings/clock/rk3228-cru.h220
-rw-r--r--dts/include/dt-bindings/clock/rk3288-cru.h4
-rw-r--r--dts/include/dt-bindings/clock/sh73a0-clock.h6
-rw-r--r--dts/include/dt-bindings/clock/tegra210-car.h401
-rw-r--r--dts/include/dt-bindings/leds/common.h2
-rw-r--r--dts/include/dt-bindings/mfd/palmas.h2
-rw-r--r--dts/include/dt-bindings/pinctrl/am43xx.h6
-rw-r--r--dts/include/dt-bindings/pinctrl/dm814x.h48
-rw-r--r--dts/include/dt-bindings/pinctrl/dra.h6
-rw-r--r--dts/include/dt-bindings/pinctrl/omap.h3
-rw-r--r--dts/include/dt-bindings/power/raspberrypi-power.h41
-rw-r--r--dts/include/dt-bindings/reset/hisi,hi6220-resets.h67
-rw-r--r--dts/include/dt-bindings/reset/mt8135-resets.h (renamed from dts/include/dt-bindings/reset-controller/mt8135-resets.h)0
-rw-r--r--dts/include/dt-bindings/reset/mt8173-resets.h (renamed from dts/include/dt-bindings/reset-controller/mt8173-resets.h)0
-rw-r--r--dts/include/dt-bindings/reset/stih407-resets.h4
-rw-r--r--dts/src/arm/am335x-baltos-ir5221.dts186
-rw-r--r--dts/src/arm/am335x-bone-common.dtsi118
-rw-r--r--dts/src/arm/am335x-boneblack.dts44
-rw-r--r--dts/src/arm/am335x-bonegreen.dts4
-rw-r--r--dts/src/arm/am335x-chiliboard.dts20
-rw-r--r--dts/src/arm/am335x-chilisom.dtsi94
-rw-r--r--dts/src/arm/am335x-cm-t335.dts396
-rw-r--r--dts/src/arm/am335x-evm.dts233
-rw-r--r--dts/src/arm/am335x-evmsk.dts280
-rw-r--r--dts/src/arm/am335x-lxm.dts120
-rw-r--r--dts/src/arm/am335x-nano.dts154
-rw-r--r--dts/src/arm/am335x-pepper.dts231
-rw-r--r--dts/src/arm/am335x-phycore-som.dtsi60
-rw-r--r--dts/src/arm/am335x-sbc-t335.dts219
-rw-r--r--dts/src/arm/am335x-shc.dts577
-rw-r--r--dts/src/arm/am335x-sl50.dts13
-rw-r--r--dts/src/arm/am335x-wega.dtsi58
-rw-r--r--dts/src/arm/am33xx.dtsi96
-rw-r--r--dts/src/arm/am3517-craneboard.dts2
-rw-r--r--dts/src/arm/am4372.dtsi87
-rw-r--r--dts/src/arm/am437x-cm-t43.dts422
-rw-r--r--dts/src/arm/am437x-gp-evm.dts389
-rw-r--r--dts/src/arm/am437x-idk-evm.dts128
-rw-r--r--dts/src/arm/am437x-sbc-t43.dts180
-rw-r--r--dts/src/arm/am437x-sk-evm.dts298
-rw-r--r--dts/src/arm/am43x-epos-evm.dts246
-rw-r--r--dts/src/arm/am57xx-beagle-x15.dts198
-rw-r--r--dts/src/arm/am57xx-cl-som-am57x.dts617
-rw-r--r--dts/src/arm/am57xx-sbc-am57x.dts179
-rw-r--r--dts/src/arm/arm-realview-pb11mp.dts681
-rw-r--r--dts/src/arm/armada-370-netgear-rn102.dts2
-rw-r--r--dts/src/arm/armada-370-netgear-rn104.dts2
-rw-r--r--dts/src/arm/armada-388-clearfog.dts456
-rw-r--r--dts/src/arm/armada-388-gp.dts10
-rw-r--r--dts/src/arm/armada-38x-solidrun-microsom.dtsi115
-rw-r--r--dts/src/arm/armada-xp-lenovo-ix4-300d.dts72
-rw-r--r--dts/src/arm/armada-xp-netgear-rn2120.dts2
-rw-r--r--dts/src/arm/at91-sama5d2_xplained.dts21
-rw-r--r--dts/src/arm/at91-sama5d4_ma5d4.dtsi127
-rw-r--r--dts/src/arm/at91-sama5d4_ma5d4evk.dts170
-rw-r--r--dts/src/arm/at91-vinco.dts256
-rw-r--r--dts/src/arm/bcm-cygnus.dtsi101
-rw-r--r--dts/src/arm/bcm-nsp.dtsi232
-rw-r--r--dts/src/arm/bcm11351.dtsi2
-rw-r--r--dts/src/arm/bcm21664.dtsi2
-rw-r--r--dts/src/arm/bcm2835-rpi-a-plus.dts1
-rw-r--r--dts/src/arm/bcm2835-rpi-b-plus.dts1
-rw-r--r--dts/src/arm/bcm2835-rpi-b-rev2.dts1
-rw-r--r--dts/src/arm/bcm2835-rpi-b.dts1
-rw-r--r--dts/src/arm/bcm2835-rpi.dtsi2
-rw-r--r--dts/src/arm/bcm2835.dtsi194
-rw-r--r--dts/src/arm/bcm2836-rpi-2-b.dts35
-rw-r--r--dts/src/arm/bcm2836.dtsi78
-rw-r--r--dts/src/arm/bcm283x.dtsi212
-rw-r--r--dts/src/arm/bcm4708.dtsi2
-rw-r--r--dts/src/arm/bcm4709-netgear-r8000.dts30
-rw-r--r--dts/src/arm/bcm5301x.dtsi92
-rw-r--r--dts/src/arm/bcm63138.dtsi36
-rw-r--r--dts/src/arm/bcm94708.dts56
-rw-r--r--dts/src/arm/bcm94709.dts56
-rw-r--r--dts/src/arm/bcm953012k.dts63
-rw-r--r--dts/src/arm/bcm958625k.dts59
-rw-r--r--dts/src/arm/berlin2.dtsi23
-rw-r--r--dts/src/arm/berlin2cd.dtsi23
-rw-r--r--dts/src/arm/berlin2q-marvell-dmp.dts38
-rw-r--r--dts/src/arm/berlin2q.dtsi34
-rw-r--r--dts/src/arm/compulab-sb-som.dtsi49
-rw-r--r--dts/src/arm/da850-enbw-cmc.dts8
-rw-r--r--dts/src/arm/da850-evm.dts8
-rw-r--r--dts/src/arm/da850.dtsi58
-rw-r--r--dts/src/arm/dm8148-evm.dts55
-rw-r--r--dts/src/arm/dm8148-t410.dts70
-rw-r--r--dts/src/arm/dm814x-clocks.dtsi109
-rw-r--r--dts/src/arm/dm814x.dtsi259
-rw-r--r--dts/src/arm/dm816x.dtsi14
-rw-r--r--dts/src/arm/dove-cubox.dts8
-rw-r--r--dts/src/arm/dove.dtsi22
-rw-r--r--dts/src/arm/dra62x-clocks.dtsi23
-rw-r--r--dts/src/arm/dra62x-j5eco-evm.dts80
-rw-r--r--dts/src/arm/dra62x.dtsi23
-rw-r--r--dts/src/arm/dra7-evm.dts255
-rw-r--r--dts/src/arm/dra7.dtsi7
-rw-r--r--dts/src/arm/dra72-evm.dts204
-rw-r--r--dts/src/arm/ea3250.dts41
-rw-r--r--dts/src/arm/emev2.dtsi2
-rw-r--r--dts/src/arm/exynos3250.dtsi14
-rw-r--r--dts/src/arm/exynos4.dtsi32
-rw-r--r--dts/src/arm/exynos4210-origen.dts4
-rw-r--r--dts/src/arm/exynos4210-smdkv310.dts4
-rw-r--r--dts/src/arm/exynos4210-universal_c210.dts8
-rw-r--r--dts/src/arm/exynos4210.dtsi14
-rw-r--r--dts/src/arm/exynos4412-odroid-common.dtsi4
-rw-r--r--dts/src/arm/exynos4412-odroidu3.dts1
-rw-r--r--dts/src/arm/exynos4412-origen.dts4
-rw-r--r--dts/src/arm/exynos4412-smdk4412.dts4
-rw-r--r--dts/src/arm/exynos4412-trats2.dts4
-rw-r--r--dts/src/arm/exynos4412.dtsi28
-rw-r--r--dts/src/arm/exynos4x12.dtsi5
-rw-r--r--dts/src/arm/exynos5.dtsi14
-rw-r--r--dts/src/arm/exynos5250-snow-common.dtsi6
-rw-r--r--dts/src/arm/exynos5250.dtsi9
-rw-r--r--dts/src/arm/exynos5410.dtsi14
-rw-r--r--dts/src/arm/exynos5420-peach-pit.dts5
-rw-r--r--dts/src/arm/exynos5420.dtsi19
-rw-r--r--dts/src/arm/exynos5422-odroidxu3-common.dtsi5
-rw-r--r--dts/src/arm/exynos5422-odroidxu3-lite.dts2
-rw-r--r--dts/src/arm/exynos5422-odroidxu3.dts2
-rw-r--r--dts/src/arm/exynos5800-peach-pi.dts20
-rw-r--r--dts/src/arm/imx25-pinfunc.h3
-rw-r--r--dts/src/arm/imx25.dtsi4
-rw-r--r--dts/src/arm/imx28-cfa10057.dts4
-rw-r--r--dts/src/arm/imx28.dtsi11
-rw-r--r--dts/src/arm/imx51-ts4800.dts302
-rw-r--r--dts/src/arm/imx6dl.dtsi7
-rw-r--r--dts/src/arm/imx6q-novena.dts785
-rw-r--r--dts/src/arm/imx6q.dtsi52
-rw-r--r--dts/src/arm/imx6qdl-gw51xx.dtsi36
-rw-r--r--dts/src/arm/imx6qdl-gw52xx.dtsi48
-rw-r--r--dts/src/arm/imx6qdl-gw53xx.dtsi33
-rw-r--r--dts/src/arm/imx6qdl-gw54xx.dtsi47
-rw-r--r--dts/src/arm/imx6qdl-gw551x.dtsi24
-rw-r--r--dts/src/arm/imx6qdl-gw552x.dtsi24
-rw-r--r--dts/src/arm/imx6qdl.dtsi61
-rw-r--r--dts/src/arm/imx6sl.dtsi11
-rw-r--r--dts/src/arm/imx6sx.dtsi19
-rw-r--r--dts/src/arm/imx6ul.dtsi18
-rw-r--r--dts/src/arm/imx7d-cl-som-imx7.dts286
-rw-r--r--dts/src/arm/imx7d-sbc-imx7.dts42
-rw-r--r--dts/src/arm/imx7d-sdb.dts10
-rw-r--r--dts/src/arm/imx7d.dtsi22
-rw-r--r--dts/src/arm/kirkwood-nsa325.dts238
-rw-r--r--dts/src/arm/kirkwood-pogoplug-series-4.dts178
-rw-r--r--dts/src/arm/logicpd-torpedo-37xx-devkit.dts155
-rw-r--r--dts/src/arm/logicpd-torpedo-som.dtsi44
-rw-r--r--dts/src/arm/lpc18xx.dtsi11
-rw-r--r--dts/src/arm/lpc32xx.dtsi142
-rw-r--r--dts/src/arm/lpc4337-ciaa.dts34
-rw-r--r--dts/src/arm/lpc4357-ea4357-devkit.dts5
-rw-r--r--dts/src/arm/lpc4357.dtsi4
-rw-r--r--dts/src/arm/ls1021a-qds.dts4
-rw-r--r--dts/src/arm/ls1021a-twr.dts13
-rw-r--r--dts/src/arm/ls1021a.dtsi21
-rw-r--r--dts/src/arm/meson8b-odroidc1.dts11
-rw-r--r--dts/src/arm/meson8b.dtsi6
-rw-r--r--dts/src/arm/mt2701-evb.dts29
-rw-r--r--dts/src/arm/mt2701.dtsi146
-rw-r--r--dts/src/arm/mt8135.dtsi2
-rw-r--r--dts/src/arm/omap3-beagle-xm.dts20
-rw-r--r--dts/src/arm/omap3-beagle.dts66
-rw-r--r--dts/src/arm/omap3-cm-t3x.dtsi2
-rw-r--r--dts/src/arm/omap3-devkit8000-common.dtsi2
-rw-r--r--dts/src/arm/omap3-devkit8000-lcd-common.dtsi2
-rw-r--r--dts/src/arm/omap3-evm-37xx.dts54
-rw-r--r--dts/src/arm/omap3-gta04.dtsi2
-rw-r--r--dts/src/arm/omap3-igep0020.dts24
-rw-r--r--dts/src/arm/omap3-igep0030.dts24
-rw-r--r--dts/src/arm/omap3-ldp.dts60
-rw-r--r--dts/src/arm/omap3-lilly-a83x.dtsi2
-rw-r--r--dts/src/arm/omap3-n900.dts116
-rw-r--r--dts/src/arm/omap3-n950-n9.dtsi12
-rw-r--r--dts/src/arm/omap3-overo-alto35-common.dtsi2
-rw-r--r--dts/src/arm/omap3-overo-chestnut43-common.dtsi4
-rw-r--r--dts/src/arm/omap3-overo-common-lcd35.dtsi2
-rw-r--r--dts/src/arm/omap3-overo-common-lcd43.dtsi2
-rw-r--r--dts/src/arm/omap3-overo-gallop43-common.dtsi4
-rw-r--r--dts/src/arm/omap3-overo-palo35-common.dtsi4
-rw-r--r--dts/src/arm/omap3-overo-palo43-common.dtsi4
-rw-r--r--dts/src/arm/omap3-pandora-common.dtsi34
-rw-r--r--dts/src/arm/omap3-panel-sharp-ls037v7dw01.dtsi2
-rw-r--r--dts/src/arm/omap3-zoom3.dts60
-rw-r--r--dts/src/arm/omap3.dtsi2
-rw-r--r--dts/src/arm/omap4-duovero-parlor.dts2
-rw-r--r--dts/src/arm/omap4-panda-a4.dts6
-rw-r--r--dts/src/arm/omap4-panda-common.dtsi164
-rw-r--r--dts/src/arm/omap4-panda-es.dts10
-rw-r--r--dts/src/arm/omap4-sdp-es23plus.dts6
-rw-r--r--dts/src/arm/omap4-sdp.dts110
-rw-r--r--dts/src/arm/omap4-var-om44customboard.dtsi2
-rw-r--r--dts/src/arm/omap4.dtsi10
-rw-r--r--dts/src/arm/omap5-board-common.dtsi94
-rw-r--r--dts/src/arm/omap5-cm-t54.dts4
-rw-r--r--dts/src/arm/omap5-uevm.dts4
-rw-r--r--dts/src/arm/omap5.dtsi2
-rw-r--r--dts/src/arm/phy3250.dts41
-rw-r--r--dts/src/arm/qcom-apq8064-cm-qs600.dts16
-rw-r--r--dts/src/arm/qcom-apq8064-ifc6410.dts48
-rw-r--r--dts/src/arm/qcom-apq8064-sony-xperia-yuga.dts436
-rw-r--r--dts/src/arm/qcom-apq8064.dtsi166
-rw-r--r--dts/src/arm/qcom-apq8074-dragonboard.dts2
-rw-r--r--dts/src/arm/qcom-apq8084-ifc6540.dts3
-rw-r--r--dts/src/arm/qcom-apq8084-mtp.dts1
-rw-r--r--dts/src/arm/qcom-apq8084.dtsi108
-rw-r--r--dts/src/arm/qcom-msm8960.dtsi23
-rw-r--r--dts/src/arm/qcom-msm8974-sony-xperia-honami.dts382
-rw-r--r--dts/src/arm/qcom-msm8974.dtsi11
-rw-r--r--dts/src/arm/qcom-pm8841.dtsi10
-rw-r--r--dts/src/arm/qcom-pm8941.dtsi21
-rw-r--r--dts/src/arm/qcom-pma8084.dtsi12
-rw-r--r--dts/src/arm/r7s72100.dtsi2
-rw-r--r--dts/src/arm/r8a73a4-ape6evm.dts4
-rw-r--r--dts/src/arm/r8a7740-armadillo800eva.dts4
-rw-r--r--dts/src/arm/r8a7740.dtsi15
-rw-r--r--dts/src/arm/r8a7778-bockw.dts33
-rw-r--r--dts/src/arm/r8a7778.dtsi9
-rw-r--r--dts/src/arm/r8a7790-lager.dts56
-rw-r--r--dts/src/arm/r8a7790.dtsi32
-rw-r--r--dts/src/arm/r8a7791-henninger.dts320
-rw-r--r--dts/src/arm/r8a7791-koelsch.dts60
-rw-r--r--dts/src/arm/r8a7791-porter.dts56
-rw-r--r--dts/src/arm/r8a7791.dtsi65
-rw-r--r--dts/src/arm/r8a7793-gose.dts77
-rw-r--r--dts/src/arm/r8a7793.dtsi534
-rw-r--r--dts/src/arm/r8a7794-alt.dts140
-rw-r--r--dts/src/arm/r8a7794-silk.dts76
-rw-r--r--dts/src/arm/r8a7794.dtsi68
-rw-r--r--dts/src/arm/rk3036-evb.dts64
-rw-r--r--dts/src/arm/rk3036-kylin.dts300
-rw-r--r--dts/src/arm/rk3036.dtsi622
-rw-r--r--dts/src/arm/rk3066a.dtsi19
-rw-r--r--dts/src/arm/rk3188.dtsi15
-rw-r--r--dts/src/arm/rk3228-evb.dts66
-rw-r--r--dts/src/arm/rk3228.dtsi442
-rw-r--r--dts/src/arm/rk3288-evb-act8846.dts44
-rw-r--r--dts/src/arm/rk3288-evb-rk808.dts27
-rw-r--r--dts/src/arm/rk3288-evb.dtsi37
-rw-r--r--dts/src/arm/rk3288-r89.dts13
-rw-r--r--dts/src/arm/rk3288-rock2-som.dtsi1
-rw-r--r--dts/src/arm/rk3288-rock2-square.dts13
-rw-r--r--dts/src/arm/rk3288-thermal.dtsi14
-rw-r--r--dts/src/arm/rk3288-veyron-brain.dts139
-rw-r--r--dts/src/arm/rk3288-veyron-mickey.dts250
-rw-r--r--dts/src/arm/rk3288-veyron-minnie.dts12
-rw-r--r--dts/src/arm/rk3288-veyron-speedy.dts8
-rw-r--r--dts/src/arm/rk3288-veyron.dtsi5
-rw-r--r--dts/src/arm/rk3288.dtsi30
-rw-r--r--dts/src/arm/rk3xxx.dtsi1
-rw-r--r--dts/src/arm/sama5d2.dtsi31
-rw-r--r--dts/src/arm/sama5d4.dtsi26
-rw-r--r--dts/src/arm/sh73a0-kzm9g.dts2
-rw-r--r--dts/src/arm/sh73a0.dtsi86
-rw-r--r--dts/src/arm/socfpga.dtsi1
-rw-r--r--dts/src/arm/socfpga_arria5_socdk.dts1
-rw-r--r--dts/src/arm/socfpga_cyclone5_de0_sockit.dts1
-rw-r--r--dts/src/arm/socfpga_cyclone5_mcv.dtsi34
-rw-r--r--dts/src/arm/socfpga_cyclone5_mcvevk.dts94
-rw-r--r--dts/src/arm/socfpga_cyclone5_socdk.dts1
-rw-r--r--dts/src/arm/socfpga_cyclone5_sockit.dts1
-rw-r--r--dts/src/arm/ste-dbx5x0.dtsi33
-rw-r--r--dts/src/arm/ste-href-stuib.dtsi23
-rw-r--r--dts/src/arm/ste-href-tvk1281618.dtsi52
-rw-r--r--dts/src/arm/ste-hrefv60plus.dtsi18
-rw-r--r--dts/src/arm/ste-nomadik-s8815.dts2
-rw-r--r--dts/src/arm/ste-snowball.dts7
-rw-r--r--dts/src/arm/ste-u300.dts10
-rw-r--r--dts/src/arm/stihxxx-b2120.dtsi46
-rw-r--r--dts/src/arm/sun4i-a10-gemei-g9.dts54
-rw-r--r--dts/src/arm/sun4i-a10-inet1.dts48
-rw-r--r--dts/src/arm/sun4i-a10-inet9f-rev03.dts164
-rw-r--r--dts/src/arm/sun4i-a10-mk802.dts4
-rw-r--r--dts/src/arm/sun4i-a10-pov-protab2-ips9.dts61
-rw-r--r--dts/src/arm/sun4i-a10.dtsi45
-rw-r--r--dts/src/arm/sun5i-a10s-auxtek-t004.dts14
-rw-r--r--dts/src/arm/sun5i-a13-empire-electronix-d709.dts241
-rw-r--r--dts/src/arm/sun5i-a13-utoo-p66.dts30
-rw-r--r--dts/src/arm/sun6i-a31s-yones-toptech-bs1078-v2.dts85
-rw-r--r--dts/src/arm/sun7i-a20-bananapi.dts4
-rw-r--r--dts/src/arm/sun7i-a20-icnova-swac.dts169
-rw-r--r--dts/src/arm/sun7i-a20-mk808c.dts4
-rw-r--r--dts/src/arm/sun7i-a20-olimex-som-evb.dts77
-rw-r--r--dts/src/arm/sun7i-a20-orangepi-mini.dts4
-rw-r--r--dts/src/arm/sun7i-a20-pcduino3-nano.dts4
-rw-r--r--dts/src/arm/sun7i-a20-pcduino3.dts4
-rw-r--r--dts/src/arm/sun7i-a20-wexler-tab7200.dts57
-rw-r--r--dts/src/arm/sun7i-a20-wits-pro-a20-dkt.dts12
-rw-r--r--dts/src/arm/sun7i-a20.dtsi41
-rw-r--r--dts/src/arm/sun8i-a23-a33.dtsi2
-rw-r--r--dts/src/arm/sun8i-h3-orangepi-plus.dts77
-rw-r--r--dts/src/arm/sun8i-h3.dtsi497
-rw-r--r--dts/src/arm/sun9i-a80-cubieboard4.dts30
-rw-r--r--dts/src/arm/sun9i-a80-optimus.dts24
-rw-r--r--dts/src/arm/sun9i-a80.dtsi159
-rw-r--r--dts/src/arm/tango4-common.dtsi130
-rw-r--r--dts/src/arm/tango4-smp8758.dtsi31
-rw-r--r--dts/src/arm/tango4-vantage-1172.dts37
-rw-r--r--dts/src/arm/tps65217.dtsi56
-rw-r--r--dts/src/arm/twl4030_omap3.dtsi2
-rw-r--r--dts/src/arm/twl6030_omap4.dtsi4
-rw-r--r--dts/src/arm/uniphier-common32.dtsi135
-rw-r--r--dts/src/arm/uniphier-ph1-ld4.dtsi265
-rw-r--r--dts/src/arm/uniphier-ph1-ld6b.dtsi2
-rw-r--r--dts/src/arm/uniphier-ph1-pro4.dtsi288
-rw-r--r--dts/src/arm/uniphier-ph1-pro5.dtsi274
-rw-r--r--dts/src/arm/uniphier-ph1-sld8.dtsi266
-rw-r--r--dts/src/arm/uniphier-proxstream2.dtsi269
-rw-r--r--dts/src/arm/versatile-ab.dts62
-rw-r--r--dts/src/arm/vf-colibri.dtsi26
-rw-r--r--dts/src/arm/vf610m4-cosmic.dts90
-rw-r--r--dts/src/arm/vfxxx.dtsi24
-rw-r--r--dts/src/arm/wm8505.dtsi4
-rw-r--r--dts/src/arm/zynq-7000.dtsi8
-rw-r--r--dts/src/arm/zynq-zc702.dts4
-rw-r--r--dts/src/arm64/apm/apm-merlin.dts12
-rw-r--r--dts/src/arm64/apm/apm-mustang.dts4
-rw-r--r--dts/src/arm64/apm/apm-shadowcat.dtsi391
-rw-r--r--dts/src/arm64/apm/apm-storm.dtsi114
-rw-r--r--dts/src/arm64/arm/juno-r1.dts28
-rw-r--r--dts/src/arm64/arm/juno.dts28
-rw-r--r--dts/src/arm64/broadcom/ns2-svk.dts26
-rw-r--r--dts/src/arm64/broadcom/ns2.dtsi200
-rw-r--r--dts/src/arm64/exynos/exynos7-espresso.dts282
-rw-r--r--dts/src/arm64/exynos/exynos7.dtsi7
-rw-r--r--dts/src/arm64/freescale/fsl-ls1043a-rdb.dts116
-rw-r--r--dts/src/arm64/freescale/fsl-ls1043a.dtsi527
-rw-r--r--dts/src/arm64/freescale/fsl-ls2080a.dtsi68
-rw-r--r--dts/src/arm64/hisilicon/hi6220-hikey.dts7
-rw-r--r--dts/src/arm64/hisilicon/hi6220.dtsi1
-rw-r--r--dts/src/arm64/hisilicon/hip05.dtsi5
-rw-r--r--dts/src/arm64/hisilicon/hip05_hns.dtsi4
-rw-r--r--dts/src/arm64/marvell/berlin4ct.dtsi63
-rw-r--r--dts/src/arm64/mediatek/mt8173-evb.dts29
-rw-r--r--dts/src/arm64/mediatek/mt8173.dtsi77
-rw-r--r--dts/src/arm64/nvidia/tegra132-norrin.dts1130
-rw-r--r--dts/src/arm64/nvidia/tegra132.dtsi990
-rw-r--r--dts/src/arm64/nvidia/tegra210-p2180.dtsi45
-rw-r--r--dts/src/arm64/nvidia/tegra210-p2371-0000.dts9
-rw-r--r--dts/src/arm64/nvidia/tegra210-p2371-2180.dts9
-rw-r--r--dts/src/arm64/nvidia/tegra210-p2530.dtsi50
-rw-r--r--dts/src/arm64/nvidia/tegra210-p2571.dts1302
-rw-r--r--dts/src/arm64/nvidia/tegra210-p2595.dtsi1272
-rw-r--r--dts/src/arm64/nvidia/tegra210-p2597.dtsi1270
-rw-r--r--dts/src/arm64/nvidia/tegra210.dtsi805
-rw-r--r--dts/src/arm64/qcom/apq8016-sbc.dtsi18
-rw-r--r--dts/src/arm64/qcom/msm8916-mtp.dts2
-rw-r--r--dts/src/arm64/qcom/msm8916-mtp.dtsi1
-rw-r--r--dts/src/arm64/qcom/msm8916-pins.dtsi19
-rw-r--r--dts/src/arm64/qcom/msm8916.dtsi107
-rw-r--r--dts/src/arm64/qcom/pm8916.dtsi6
-rw-r--r--dts/src/arm64/renesas/r8a7795-salvator-x.dts251
-rw-r--r--dts/src/arm64/renesas/r8a7795.dtsi779
-rw-r--r--dts/src/arm64/rockchip/rk3368-evb-act8846.dts176
-rw-r--r--dts/src/arm64/rockchip/rk3368-evb.dtsi281
-rw-r--r--dts/src/arm64/rockchip/rk3368-r88.dts6
-rw-r--r--dts/src/arm64/rockchip/rk3368-thermal.dtsi112
-rw-r--r--dts/src/arm64/rockchip/rk3368.dtsi105
-rw-r--r--dts/src/arm64/socionext/uniphier-ph1-ld10-ref.dts95
-rw-r--r--dts/src/arm64/socionext/uniphier-ph1-ld10.dtsi280
-rw-r--r--dts/src/arm64/socionext/uniphier-pinctrl.dtsi105
-rw-r--r--dts/src/arm64/socionext/uniphier-support-card.dtsi65
-rw-r--r--dts/src/arm64/xilinx/zynqmp.dtsi2
-rw-r--r--dts/src/mips/brcm/bcm6328.dtsi10
-rw-r--r--dts/src/mips/brcm/bcm6368.dtsi22
-rw-r--r--dts/src/mips/brcm/bcm7125.dtsi1
-rw-r--r--dts/src/mips/brcm/bcm7346.dtsi1
-rw-r--r--dts/src/mips/brcm/bcm7358.dtsi1
-rw-r--r--dts/src/mips/brcm/bcm7360.dtsi1
-rw-r--r--dts/src/mips/brcm/bcm7362.dtsi1
-rw-r--r--dts/src/mips/brcm/bcm7420.dtsi1
-rw-r--r--dts/src/mips/brcm/bcm7425.dtsi1
-rw-r--r--dts/src/mips/brcm/bcm7435.dtsi1
-rw-r--r--dts/src/mips/ingenic/ci20.dts64
-rw-r--r--dts/src/mips/ingenic/jz4780.dtsi26
-rw-r--r--dts/src/mips/pic32/pic32mzda-clk.dtsi236
-rw-r--r--dts/src/mips/pic32/pic32mzda.dtsi281
-rw-r--r--dts/src/mips/pic32/pic32mzda_sk.dts151
-rw-r--r--dts/src/mips/qca/ar9132.dtsi26
-rw-r--r--dts/src/mips/qca/ar9132_tl_wr1043nd_v1.dts8
-rw-r--r--dts/src/powerpc/fsl/b4si-post.dtsi5
-rw-r--r--dts/src/powerpc/fsl/bsc9132qds.dts15
-rw-r--r--dts/src/powerpc/fsl/bsc9132si-post.dtsi28
-rw-r--r--dts/src/powerpc/fsl/bsc9132si-pre.dtsi1
-rw-r--r--dts/src/powerpc/fsl/p1010rdb.dtsi16
-rw-r--r--dts/src/powerpc/fsl/t1023rdb.dts2
-rw-r--r--dts/src/powerpc/fsl/t1023si-post.dtsi86
-rw-r--r--dts/src/powerpc/fsl/t1024qds.dts2
-rw-r--r--dts/src/powerpc/fsl/t1024rdb.dts2
-rw-r--r--dts/src/powerpc/fsl/t1024si-post.dtsi2
-rw-r--r--dts/src/powerpc/fsl/t102xsi-pre.dtsi2
-rw-r--r--dts/src/powerpc/fsl/t1040d4rdb.dts2
-rw-r--r--dts/src/powerpc/fsl/t1040qds.dts2
-rw-r--r--dts/src/powerpc/fsl/t1040rdb.dts2
-rw-r--r--dts/src/powerpc/fsl/t1040si-post.dtsi94
-rw-r--r--dts/src/powerpc/fsl/t1042d4rdb.dts2
-rw-r--r--dts/src/powerpc/fsl/t1042qds.dts2
-rw-r--r--dts/src/powerpc/fsl/t1042rdb.dts2
-rw-r--r--dts/src/powerpc/fsl/t1042rdb_pi.dts2
-rw-r--r--dts/src/powerpc/fsl/t1042si-post.dtsi2
-rw-r--r--dts/src/powerpc/fsl/t104xsi-pre.dtsi4
646 files changed, 38992 insertions, 5162 deletions
diff --git a/dts/Bindings/arm/arm,scpi.txt b/dts/Bindings/arm/arm,scpi.txt
index 86302de..313dabd 100644
--- a/dts/Bindings/arm/arm,scpi.txt
+++ b/dts/Bindings/arm/arm,scpi.txt
@@ -63,7 +63,7 @@ Required properties:
- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno
The rest of the properties should follow the generic mmio-sram description
-found in ../../misc/sysram.txt
+found in ../../sram/sram.txt
Each sub-node represents the reserved area for SCPI.
diff --git a/dts/Bindings/arm/bcm/brcm,bcm2835.txt b/dts/Bindings/arm/bcm/brcm,bcm2835.txt
index c78576b..11d3056 100644
--- a/dts/Bindings/arm/bcm/brcm,bcm2835.txt
+++ b/dts/Bindings/arm/bcm/brcm,bcm2835.txt
@@ -26,6 +26,10 @@ Raspberry Pi Model B+
Required root node properties:
compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
+Raspberry Pi 2 Model B
+Required root node properties:
+compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
+
Raspberry Pi Compute Module
Required root node properties:
compatible = "raspberrypi,compute-module", "brcm,bcm2835";
diff --git a/dts/Bindings/arm/bcm/brcm,bcm4708.txt b/dts/Bindings/arm/bcm/brcm,bcm4708.txt
index 6b0f49f..8608a77 100644
--- a/dts/Bindings/arm/bcm/brcm,bcm4708.txt
+++ b/dts/Bindings/arm/bcm/brcm,bcm4708.txt
@@ -5,4 +5,11 @@ Boards with the BCM4708 SoC shall have the following properties:
Required root node property:
+bcm4708
compatible = "brcm,bcm4708";
+
+bcm4709
+compatible = "brcm,bcm4709";
+
+bcm53012
+compatible = "brcm,bcm53012";
diff --git a/dts/Bindings/arm/bcm/brcm,nsp-cpu-method.txt b/dts/Bindings/arm/bcm/brcm,nsp-cpu-method.txt
new file mode 100644
index 0000000..677ef9d
--- /dev/null
+++ b/dts/Bindings/arm/bcm/brcm,nsp-cpu-method.txt
@@ -0,0 +1,39 @@
+Broadcom Northstar Plus SoC CPU Enable Method
+---------------------------------------------
+This binding defines the enable method used for starting secondary
+CPU in the following Broadcom SoCs:
+ BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
+
+The enable method is specified by defining the following required
+properties in the corresponding secondary "cpu" device tree node:
+ - enable-method = "brcm,bcm-nsp-smp";
+ - secondary-boot-reg = <...>;
+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register which should hold the common
+entry point for a secondary CPU. This entry is cpu node specific
+and should be added per cpu. E.g., in case of NSP (BCM58625) which
+is a dual core CPU SoC, this entry should be added to cpu1 node.
+
+
+Example:
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ enable-method = "brcm,bcm-nsp-smp";
+ secondary-boot-reg = <0xffff042c>;
+ reg = <1>;
+ };
+ };
diff --git a/dts/Bindings/arm/compulab-boards.txt b/dts/Bindings/arm/compulab-boards.txt
new file mode 100644
index 0000000..42a1028
--- /dev/null
+++ b/dts/Bindings/arm/compulab-boards.txt
@@ -0,0 +1,25 @@
+CompuLab SB-SOM is a multi-module baseboard capable of carrying:
+ - CM-T43
+ - CM-T54
+ - CM-QS600
+ - CL-SOM-AM57x
+ - CL-SOM-iMX7
+modules with minor modifications to the SB-SOM assembly.
+
+Required root node properties:
+ - compatible = should be "compulab,sb-som"
+
+Compulab CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on
+Freescale i.MX7 ARM Cortex-A7 System-on-Chip.
+
+Required root node properties:
+ - compatible = "compulab,cl-som-imx7", "fsl,imx7d";
+
+Compulab SBC-iMX7 is a single board computer based on the
+Freescale i.MX7 system-on-chip. SBC-iMX7 is implemented with
+the CL-SOM-iMX7 System-on-Module providing most of the functions,
+and SB-SOM-iMX7 carrier board providing additional peripheral
+functions and connectors.
+
+Required root node properties:
+ - compatible = "compulab,sbc-imx7", "compulab,cl-som-imx7", "fsl,imx7d";
diff --git a/dts/Bindings/arm/cpus.txt b/dts/Bindings/arm/cpus.txt
index 3a07a87..ae9be07 100644
--- a/dts/Bindings/arm/cpus.txt
+++ b/dts/Bindings/arm/cpus.txt
@@ -157,6 +157,7 @@ nodes to be present and contain the properties described below.
"arm,cortex-a17"
"arm,cortex-a53"
"arm,cortex-a57"
+ "arm,cortex-a72"
"arm,cortex-m0"
"arm,cortex-m0+"
"arm,cortex-m1"
@@ -190,6 +191,8 @@ nodes to be present and contain the properties described below.
"allwinner,sun6i-a31"
"allwinner,sun8i-a23"
"arm,psci"
+ "arm,realview-smp"
+ "brcm,bcm-nsp-smp"
"brcm,brahma-b15"
"marvell,armada-375-smp"
"marvell,armada-380-smp"
@@ -200,6 +203,7 @@ nodes to be present and contain the properties described below.
"qcom,gcc-msm8660"
"qcom,kpss-acc-v1"
"qcom,kpss-acc-v2"
+ "rockchip,rk3036-smp"
"rockchip,rk3066-smp"
"ste,dbx500-smp"
@@ -242,6 +246,23 @@ nodes to be present and contain the properties described below.
Definition: Specifies the syscon node controlling the cpu core
power domains.
+ - dynamic-power-coefficient
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: A u32 value that represents the running time dynamic
+ power coefficient in units of mW/MHz/uVolt^2. The
+ coefficient can either be calculated from power
+ measurements or derived by analysis.
+
+ The dynamic power consumption of the CPU is
+ proportional to the square of the Voltage (V) and
+ the clock frequency (f). The coefficient is used to
+ calculate the dynamic power as below -
+
+ Pdyn = dynamic-power-coefficient * V^2 * f
+
+ where voltage is in uV, frequency is in MHz.
+
Example 1 (dual-cluster big.LITTLE system 32-bit):
cpus {
diff --git a/dts/Bindings/arm/fsl.txt b/dts/Bindings/arm/fsl.txt
index 34c88b0..752a685 100644
--- a/dts/Bindings/arm/fsl.txt
+++ b/dts/Bindings/arm/fsl.txt
@@ -131,6 +131,10 @@ Example:
Freescale ARMv8 based Layerscape SoC family Device Tree Bindings
----------------------------------------------------------------
+LS1043A ARMv8 based RDB Board
+Required root node properties:
+ - compatible = "fsl,ls1043a-rdb", "fsl,ls1043a";
+
LS2080A ARMv8 based Simulator model
Required root node properties:
- compatible = "fsl,ls2080a-simu", "fsl,ls2080a";
diff --git a/dts/Bindings/arm/hisilicon/hisilicon.txt b/dts/Bindings/arm/hisilicon/hisilicon.txt
index 6ac7c00..e3ccab1 100644
--- a/dts/Bindings/arm/hisilicon/hisilicon.txt
+++ b/dts/Bindings/arm/hisilicon/hisilicon.txt
@@ -187,6 +187,22 @@ Example:
reg = <0xb0000000 0x10000>;
};
+Hisilicon HiP05 PERISUB system controller
+
+Required properties:
+- compatible : "hisilicon,hip05-perisubc", "syscon";
+- reg : Register address and size
+
+The HiP05 PERISUB system controller is shared by peripheral controllers in
+HiP05 Soc to implement some basic configurations. The peripheral
+controllers include mdio, ddr, iic, uart, timer and so on.
+
+Example:
+ /* for HiP05 perisub-ctrl-c system */
+ peri_c_subctrl: syscon@80000000 {
+ compatible = "hisilicon,hip05-perisubc", "syscon";
+ reg = <0x0 0x80000000 0x0 0x10000>;
+ };
-----------------------------------------------------------------------
Hisilicon CPU controller
diff --git a/dts/Bindings/arm/l2cc.txt b/dts/Bindings/arm/l2c2x0.txt
index 06c88a4..fe0398c 100644
--- a/dts/Bindings/arm/l2cc.txt
+++ b/dts/Bindings/arm/l2c2x0.txt
@@ -1,7 +1,8 @@
* ARM L2 Cache Controller
-ARM cores often have a separate level 2 cache controller. There are various
-implementations of the L2 cache controller with compatible programming models.
+ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/PL220/
+PL310 and variants) based level 2 cache controller. All these various implementations
+of the L2 cache controller have compatible programming models (Note 1).
Some of the properties that are just prefixed "cache-*" are taken from section
3.7.3 of the ePAPR v1.1 specification which can be found at:
https://www.power.org/wp-content/uploads/2012/06/Power_ePAPR_APPROVED_v1.1.pdf
@@ -67,12 +68,17 @@ Optional properties:
disable if zero.
- arm,prefetch-offset : Override prefetch offset value. Valid values are
0-7, 15, 23, and 31.
-- arm,shared-override : The default behavior of the pl310 cache controller with
- respect to the shareable attribute is to transform "normal memory
- non-cacheable transactions" into "cacheable no allocate" (for reads) or
- "write through no write allocate" (for writes).
+- arm,shared-override : The default behavior of the L220 or PL310 cache
+ controllers with respect to the shareable attribute is to transform "normal
+ memory non-cacheable transactions" into "cacheable no allocate" (for reads)
+ or "write through no write allocate" (for writes).
On systems where this may cause DMA buffer corruption, this property must be
specified to indicate that such transforms are precluded.
+- arm,parity-enable : enable parity checking on the L2 cache (L220 or PL310).
+- arm,parity-disable : disable parity checking on the L2 cache (L220 or PL310).
+- arm,outer-sync-disable : disable the outer sync operation on the L2 cache.
+ Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that
+ will randomly hang unless outer sync operations are disabled.
- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1>
(forcibly enable), property absent (retain settings set by firmware)
- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable),
@@ -91,3 +97,9 @@ L2: cache-controller {
cache-level = <2>;
interrupts = <45>;
};
+
+Note 1: The description in this document doesn't apply to integrated L2
+ cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These
+ integrated L2 controllers are assumed to be all preconfigured by
+ early secure boot code. Thus no need to deal with their configuration
+ in the kernel at all.
diff --git a/dts/Bindings/arm/marvell,kirkwood.txt b/dts/Bindings/arm/marvell,kirkwood.txt
index 5171ad8..ab0c9cd 100644
--- a/dts/Bindings/arm/marvell,kirkwood.txt
+++ b/dts/Bindings/arm/marvell,kirkwood.txt
@@ -24,6 +24,8 @@ board. Currently known boards are:
"buffalo,lswxl"
"buffalo,lsxhl"
"buffalo,lsxl"
+"cloudengines,pogo02"
+"cloudengines,pogoplugv4"
"dlink,dns-320"
"dlink,dns-320-a1"
"dlink,dns-325"
diff --git a/dts/Bindings/arm/mediatek.txt b/dts/Bindings/arm/mediatek.txt
index 618a919..54f43bc 100644
--- a/dts/Bindings/arm/mediatek.txt
+++ b/dts/Bindings/arm/mediatek.txt
@@ -6,6 +6,7 @@ following property:
Required root node property:
compatible: Must contain one of
+ "mediatek,mt2701"
"mediatek,mt6580"
"mediatek,mt6589"
"mediatek,mt6592"
@@ -17,6 +18,9 @@ compatible: Must contain one of
Supported boards:
+- Evaluation board for MT2701:
+ Required root node properties:
+ - compatible = "mediatek,mt2701-evb", "mediatek,mt2701";
- Evaluation board for MT6580:
Required root node properties:
- compatible = "mediatek,mt6580-evbp1", "mediatek,mt6580";
diff --git a/dts/Bindings/arm/mediatek/mediatek,infracfg.txt b/dts/Bindings/arm/mediatek/mediatek,infracfg.txt
index f6cd3e4..aaf8d14 100644
--- a/dts/Bindings/arm/mediatek/mediatek,infracfg.txt
+++ b/dts/Bindings/arm/mediatek/mediatek,infracfg.txt
@@ -18,7 +18,7 @@ The available clocks are defined in dt-bindings/clock/mt*-clk.h.
Also it uses the common reset controller binding from
Documentation/devicetree/bindings/reset/reset.txt.
The available reset outputs are defined in
-dt-bindings/reset-controller/mt*-resets.h
+dt-bindings/reset/mt*-resets.h
Example:
diff --git a/dts/Bindings/arm/mediatek/mediatek,pericfg.txt b/dts/Bindings/arm/mediatek/mediatek,pericfg.txt
index f25b854..2f6ff86 100644
--- a/dts/Bindings/arm/mediatek/mediatek,pericfg.txt
+++ b/dts/Bindings/arm/mediatek/mediatek,pericfg.txt
@@ -18,7 +18,7 @@ The available clocks are defined in dt-bindings/clock/mt*-clk.h.
Also it uses the common reset controller binding from
Documentation/devicetree/bindings/reset/reset.txt.
The available reset outputs are defined in
-dt-bindings/reset-controller/mt*-resets.h
+dt-bindings/reset/mt*-resets.h
Example:
diff --git a/dts/Bindings/arm/omap/omap.txt b/dts/Bindings/arm/omap/omap.txt
index 9f4e513..a2bd593 100644
--- a/dts/Bindings/arm/omap/omap.txt
+++ b/dts/Bindings/arm/omap/omap.txt
@@ -138,9 +138,21 @@ Boards:
- AM335X phyBOARD-WEGA: Single Board Computer dev kit
compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"
+- AM335X CM-T335 : System On Module, built around the Sitara AM3352/4
+ compatible = "compulab,cm-t335", "ti,am33xx"
+
+- AM335X SBC-T335 : single board computer, built around the Sitara AM3352/4
+ compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx"
+
- OMAP5 EVM : Evaluation Module
compatible = "ti,omap5-evm", "ti,omap5"
+- AM437x CM-T43
+ compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43"
+
+- AM437x SBC-T43
+ compatible = "compulab,am437x-sbc-t43", "compulab,am437x-cm-t43", "ti,am4372", "ti,am43"
+
- AM43x EPOS EVM
compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43"
@@ -150,6 +162,12 @@ Boards:
- AM437x SK EVM: AM437x StarterKit Evaluation Module
compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43"
+- AM57XX CL-SOM-AM57x
+ compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+
+- AM57XX SBC-AM57x
+ compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
+
- DRA742 EVM: Software Development Board for DRA742
compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
diff --git a/dts/Bindings/arm/pmu.txt b/dts/Bindings/arm/pmu.txt
index 97ba45a..5651883 100644
--- a/dts/Bindings/arm/pmu.txt
+++ b/dts/Bindings/arm/pmu.txt
@@ -9,8 +9,9 @@ Required properties:
- compatible : should be one of
"apm,potenza-pmu"
"arm,armv8-pmuv3"
- "arm.cortex-a57-pmu"
- "arm.cortex-a53-pmu"
+ "arm,cortex-a72-pmu"
+ "arm,cortex-a57-pmu"
+ "arm,cortex-a53-pmu"
"arm,cortex-a17-pmu"
"arm,cortex-a15-pmu"
"arm,cortex-a12-pmu"
diff --git a/dts/Bindings/arm/psci.txt b/dts/Bindings/arm/psci.txt
index a9adab8..a2c4f1d 100644
--- a/dts/Bindings/arm/psci.txt
+++ b/dts/Bindings/arm/psci.txt
@@ -23,17 +23,20 @@ Main node required properties:
- compatible : should contain at least one of:
- * "arm,psci" : for implementations complying to PSCI versions prior to
- 0.2. For these cases function IDs must be provided.
-
- * "arm,psci-0.2" : for implementations complying to PSCI 0.2. Function
- IDs are not required and should be ignored by an OS with PSCI 0.2
- support, but are permitted to be present for compatibility with
- existing software when "arm,psci" is later in the compatible list.
-
- * "arm,psci-1.0" : for implementations complying to PSCI 1.0. PSCI 1.0 is
- backward compatible with PSCI 0.2 with minor specification updates,
- as defined in the PSCI specification[2].
+ * "arm,psci" : For implementations complying to PSCI versions prior
+ to 0.2.
+ For these cases function IDs must be provided.
+
+ * "arm,psci-0.2" : For implementations complying to PSCI 0.2.
+ Function IDs are not required and should be ignored by
+ an OS with PSCI 0.2 support, but are permitted to be
+ present for compatibility with existing software when
+ "arm,psci" is later in the compatible list.
+
+ * "arm,psci-1.0" : For implementations complying to PSCI 1.0.
+ PSCI 1.0 is backward compatible with PSCI 0.2 with
+ minor specification updates, as defined in the PSCI
+ specification[2].
- method : The method of calling the PSCI firmware. Permitted
values are:
diff --git a/dts/Bindings/arm/rockchip.txt b/dts/Bindings/arm/rockchip.txt
index 8e985dd..078c14f 100644
--- a/dts/Bindings/arm/rockchip.txt
+++ b/dts/Bindings/arm/rockchip.txt
@@ -1,6 +1,10 @@
Rockchip platforms device tree bindings
---------------------------------------
+- Kylin RK3036 board:
+ Required root node properties:
+ - compatible = "rockchip,kylin-rk3036", "rockchip,rk3036";
+
- MarsBoard RK3066 board:
Required root node properties:
- compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
@@ -35,6 +39,11 @@ Rockchip platforms device tree bindings
Required root node properties:
- compatible = "netxeon,r89", "rockchip,rk3288";
+- Google Brain (dev-board):
+ Required root node properties:
+ - compatible = "google,veyron-brain-rev0", "google,veyron-brain",
+ "google,veyron", "rockchip,rk3288";
+
- Google Jaq (Haier Chromebook 11 and more):
Required root node properties:
- compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
@@ -49,6 +58,15 @@ Rockchip platforms device tree bindings
"google,veyron-jerry-rev3", "google,veyron-jerry",
"google,veyron", "rockchip,rk3288";
+- Google Mickey (Asus Chromebit CS10):
+ Required root node properties:
+ - compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
+ "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
+ "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
+ "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
+ "google,veyron-mickey-rev0", "google,veyron-mickey",
+ "google,veyron", "rockchip,rk3288";
+
- Google Minnie (Asus Chromebook Flip C100P):
Required root node properties:
- compatible = "google,veyron-minnie-rev4", "google,veyron-minnie-rev3",
@@ -69,6 +87,14 @@ Rockchip platforms device tree bindings
"google,veyron-speedy-rev3", "google,veyron-speedy-rev2",
"google,veyron-speedy", "google,veyron", "rockchip,rk3288";
+- Rockchip RK3368 evb:
+ Required root node properties:
+ - compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368";
+
- Rockchip R88 board:
Required root node properties:
- compatible = "rockchip,r88", "rockchip,rk3368";
+
+- Rockchip RK3228 Evaluation board:
+ Required root node properties:
+ - compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
diff --git a/dts/Bindings/arm/samsung/exynos-adc.txt b/dts/Bindings/arm/samsung/exynos-adc.txt
index f46ca9a..ccaaec6 100644
--- a/dts/Bindings/arm/samsung/exynos-adc.txt
+++ b/dts/Bindings/arm/samsung/exynos-adc.txt
@@ -47,6 +47,9 @@ Required properties:
- samsung,syscon-phandle Contains the PMU system controller node
(To access the ADC_PHY register on Exynos5250/5420/5800/3250)
+Optional properties:
+- has-touchscreen: If present, indicates that a touchscreen is
+ connected an usable.
Note: child nodes can be added for auto probing from device tree.
diff --git a/dts/Bindings/arm/scu.txt b/dts/Bindings/arm/scu.txt
index c447680..08a5878 100644
--- a/dts/Bindings/arm/scu.txt
+++ b/dts/Bindings/arm/scu.txt
@@ -10,10 +10,13 @@ References:
Revision r2p0
- Cortex-A5: see DDI0434B Cortex-A5 MPCore Technical Reference Manual
Revision r0p1
+- ARM11 MPCore: see DDI0360F ARM 11 MPCore Processor Technical Reference
+ Manial Revision r2p0
- compatible : Should be:
"arm,cortex-a9-scu"
"arm,cortex-a5-scu"
+ "arm,arm11mp-scu"
- reg : Specify the base address and the size of the SCU register window.
diff --git a/dts/Bindings/arm/secure.txt b/dts/Bindings/arm/secure.txt
new file mode 100644
index 0000000..e31303f
--- /dev/null
+++ b/dts/Bindings/arm/secure.txt
@@ -0,0 +1,53 @@
+* ARM Secure world bindings
+
+ARM CPUs with TrustZone support have two distinct address spaces,
+"Normal" and "Secure". Most devicetree consumers (including the Linux
+kernel) are not TrustZone aware and run entirely in either the Normal
+world or the Secure world. However some devicetree consumers are
+TrustZone aware and need to be able to determine whether devices are
+visible only in the Secure address space, only in the Normal address
+space, or visible in both. (One example of that situation would be a
+virtual machine which boots Secure firmware and wants to tell the
+firmware about the layout of the machine via devicetree.)
+
+The general principle of the naming scheme for Secure world bindings
+is that any property that needs a different value in the Secure world
+can be supported by prefixing the property name with "secure-". So for
+instance "secure-foo" would override "foo". For property names with
+a vendor prefix, the Secure variant of "vendor,foo" would be
+"vendor,secure-foo". If there is no "secure-" property then the Secure
+world value is the same as specified for the Normal world by the
+non-prefixed property. However, only the properties listed below may
+validly have "secure-" versions; this list will be enlarged on a
+case-by-case basis.
+
+Defining the bindings in this way means that a device tree which has
+been annotated to indicate the presence of Secure-only devices can
+still be processed unmodified by existing Non-secure software (and in
+particular by the kernel).
+
+Note that it is still valid for bindings intended for purely Secure
+world consumers (like kernels that run entirely in Secure) to simply
+describe the view of Secure world using the standard bindings. These
+secure- bindings only need to be used where both the Secure and Normal
+world views need to be described in a single device tree.
+
+Valid Secure world properties:
+
+- secure-status : specifies whether the device is present and usable
+ in the secure world. The combination of this with "status" allows
+ the various possible combinations of device visibility to be
+ specified. If "secure-status" is not specified it defaults to the
+ same value as "status"; if "status" is not specified either then
+ both default to "okay". This means the following combinations are
+ possible:
+
+ /* Neither specified: default to visible in both S and NS */
+ secure-status = "okay"; /* visible in both */
+ status = "okay"; /* visible in both */
+ status = "okay"; secure-status = "okay"; /* visible in both */
+ secure-status = "disabled"; /* NS-only */
+ status = "okay"; secure-status = "disabled"; /* NS-only */
+ status = "disabled"; secure-status = "okay"; /* S-only */
+ status = "disabled"; /* disabled in both */
+ status = "disabled"; secure-status = "disabled"; /* disabled in both */
diff --git a/dts/Bindings/arm/shmobile.txt b/dts/Bindings/arm/shmobile.txt
index 40bb900..9cf67e4 100644
--- a/dts/Bindings/arm/shmobile.txt
+++ b/dts/Bindings/arm/shmobile.txt
@@ -27,6 +27,8 @@ SoCs:
compatible = "renesas,r8a7793"
- R-Car E2 (R8A77940)
compatible = "renesas,r8a7794"
+ - R-Car H3 (R8A77950)
+ compatible = "renesas,r8a7795"
Boards:
@@ -57,5 +59,7 @@ Boards:
compatible = "renesas,marzen", "renesas,r8a7779"
- Porter (M2-LCDP)
compatible = "renesas,porter", "renesas,r8a7791"
+ - Salvator-X (RTP0RC7795SIPB0010S)
+ compatible = "renesas,salvator-x", "renesas,r8a7795";
- SILK (RTP0RC7794LCB00011S)
compatible = "renesas,silk", "renesas,r8a7794"
diff --git a/dts/Bindings/arm/technologic.txt b/dts/Bindings/arm/technologic.txt
new file mode 100644
index 0000000..8422988
--- /dev/null
+++ b/dts/Bindings/arm/technologic.txt
@@ -0,0 +1,6 @@
+Technologic Systems Platforms Device Tree Bindings
+--------------------------------------------------
+
+TS-4800 board
+Required root node properties:
+ - compatible = "technologic,imx51-ts4800", "fsl,imx51";
diff --git a/dts/Bindings/ata/brcm,sata-brcmstb.txt b/dts/Bindings/ata/brcm,sata-brcmstb.txt
index 20ac9bb..6087283 100644
--- a/dts/Bindings/ata/brcm,sata-brcmstb.txt
+++ b/dts/Bindings/ata/brcm,sata-brcmstb.txt
@@ -4,7 +4,9 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
Each SATA controller should have its own node.
Required properties:
-- compatible : compatible list, may contain "brcm,bcm7445-ahci" and/or
+- compatible : should be one or more of
+ "brcm,bcm7425-ahci"
+ "brcm,bcm7445-ahci"
"brcm,sata3-ahci"
- reg : register mappings for AHCI and SATA_TOP_CTRL
- reg-names : "ahci" and "top-ctrl"
diff --git a/dts/Bindings/ata/sata_rcar.txt b/dts/Bindings/ata/sata_rcar.txt
index 2493a5a..0764f9a 100644
--- a/dts/Bindings/ata/sata_rcar.txt
+++ b/dts/Bindings/ata/sata_rcar.txt
@@ -8,6 +8,7 @@ Required properties:
- "renesas,sata-r8a7790" for R-Car H2 other than ES1
- "renesas,sata-r8a7791" for R-Car M2-W
- "renesas,sata-r8a7793" for R-Car M2-N
+ - "renesas,sata-r8a7795" for R-Car H3
- reg : address and length of the SATA registers;
- interrupts : must consist of one interrupt specifier.
- clocks : must contain a reference to the functional clock.
diff --git a/dts/Bindings/bus/uniphier-system-bus.txt b/dts/Bindings/bus/uniphier-system-bus.txt
new file mode 100644
index 0000000..68ef80a
--- /dev/null
+++ b/dts/Bindings/bus/uniphier-system-bus.txt
@@ -0,0 +1,66 @@
+UniPhier System Bus
+
+The UniPhier System Bus is an external bus that connects on-board devices to
+the UniPhier SoC. It is a simple (semi-)parallel bus with address, data, and
+some control signals. It supports up to 8 banks (chip selects).
+
+Before any access to the bus, the bus controller must be configured; the bus
+controller registers provide the control for the translation from the offset
+within each bank to the CPU-viewed address. The needed setup includes the base
+address, the size of each bank. Optionally, some timing parameters can be
+optimized for faster bus access.
+
+Required properties:
+- compatible: should be "socionext,uniphier-system-bus".
+- reg: offset and length of the register set for the bus controller device.
+- #address-cells: should be 2. The first cell is the bank number (chip select).
+ The second cell is the address offset within the bank.
+- #size-cells: should be 1.
+- ranges: should provide a proper address translation from the System Bus to
+ the parent bus.
+
+Note:
+The address region(s) that can be assigned for the System Bus is implementation
+defined. Some SoCs can use 0x00000000-0x0fffffff and 0x40000000-0x4fffffff,
+while other SoCs can only use 0x40000000-0x4fffffff. There might be additional
+limitations depending on SoCs and the boot mode. The address translation is
+arbitrary as long as the banks are assigned in the supported address space with
+the required alignment and they do not overlap one another.
+For example, it is possible to map:
+ bank 0 to 0x42000000-0x43ffffff, bank 5 to 0x46000000-0x46ffffff
+It is also possible to map:
+ bank 0 to 0x48000000-0x49ffffff, bank 5 to 0x44000000-0x44ffffff
+There is no reason to stick to a particular translation mapping, but the
+"ranges" property should provide a "reasonable" default that is known to work.
+The software should initialize the bus controller according to it.
+
+Example:
+
+ system-bus {
+ compatible = "socionext,uniphier-system-bus";
+ reg = <0x58c00000 0x400>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0x00000000 0x42000000 0x02000000
+ 5 0x00000000 0x46000000 0x01000000>;
+
+ ethernet@1,01f00000 {
+ compatible = "smsc,lan9115";
+ reg = <1 0x01f00000 0x1000>;
+ interrupts = <0 48 4>
+ phy-mode = "mii";
+ };
+
+ uart@5,00200000 {
+ compatible = "ns16550a";
+ reg = <5 0x00200000 0x20>;
+ interrupts = <0 49 4>
+ clock-frequency = <12288000>;
+ };
+ };
+
+In this example,
+ - the Ethernet device is connected at the offset 0x01f00000 of CS1 and
+ mapped to 0x43f00000 of the parent bus.
+ - the UART device is connected at the offset 0x00200000 of CS5 and
+ mapped to 0x46200000 of the parent bus.
diff --git a/dts/Bindings/clock/arm-syscon-icst.txt b/dts/Bindings/clock/arm-syscon-icst.txt
new file mode 100644
index 0000000..8b7177c
--- /dev/null
+++ b/dts/Bindings/clock/arm-syscon-icst.txt
@@ -0,0 +1,40 @@
+ARM System Controller ICST clocks
+
+The ICS525 and ICS307 oscillators are produced by Integrated Devices
+Technology (IDT). ARM integrated these oscillators deeply into their
+reference designs by adding special control registers that manage such
+oscillators to their system controllers.
+
+The ARM system controller contains logic to serialize and initialize
+an ICST clock request after a write to the 32 bit register at an offset
+into the system controller. Furthermore, to even be able to alter one of
+these frequencies, the system controller must first be unlocked by
+writing a special token to another offset in the system controller.
+
+The ICST oscillator must be provided inside a system controller node.
+
+Required properties:
+- lock-offset: the offset address into the system controller where the
+ unlocking register is located
+- vco-offset: the offset address into the system controller where the
+ ICST control register is located (even 32 bit address)
+- compatible: must be one of "arm,syscon-icst525" or "arm,syscon-icst307"
+- #clock-cells: must be <0>
+- clocks: parent clock, since the ICST needs a parent clock to derive its
+ frequency from, this attribute is compulsory.
+
+Example:
+
+syscon: syscon@10000000 {
+ compatible = "syscon";
+ reg = <0x10000000 0x1000>;
+
+ oscclk0: osc0@0c {
+ compatible = "arm,syscon-icst307";
+ #clock-cells = <0>;
+ lock-offset = <0x20>;
+ vco-offset = <0x0c>;
+ clocks = <&xtal24mhz>;
+ };
+ (...)
+};
diff --git a/dts/Bindings/clock/brcm,bcm2835-aux-clock.txt b/dts/Bindings/clock/brcm,bcm2835-aux-clock.txt
new file mode 100644
index 0000000..7a837d2
--- /dev/null
+++ b/dts/Bindings/clock/brcm,bcm2835-aux-clock.txt
@@ -0,0 +1,31 @@
+Broadcom BCM2835 auxiliary peripheral support
+
+This binding uses the common clock binding:
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The auxiliary peripherals (UART, SPI1, and SPI2) have a small register
+area controlling clock gating to the peripherals, and providing an IRQ
+status register.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-aux"
+- #clock-cells: Should be <1>. The permitted clock-specifier values can be
+ found in include/dt-bindings/clock/bcm2835-aux.h
+- reg: Specifies base physical address and size of the registers
+- clocks: The parent clock phandle
+
+Example:
+
+ clocks: cprman@7e101000 {
+ compatible = "brcm,bcm2835-cprman";
+ #clock-cells = <1>;
+ reg = <0x7e101000 0x2000>;
+ clocks = <&clk_osc>;
+ };
+
+ aux: aux@0x7e215004 {
+ compatible = "brcm,bcm2835-aux";
+ #clock-cells = <1>;
+ reg = <0x7e215000 0x8>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ };
diff --git a/dts/Bindings/clock/brcm,iproc-clocks.txt b/dts/Bindings/clock/brcm,iproc-clocks.txt
index ede65a5..0b35e71 100644
--- a/dts/Bindings/clock/brcm,iproc-clocks.txt
+++ b/dts/Bindings/clock/brcm,iproc-clocks.txt
@@ -208,3 +208,8 @@ These clock IDs are defined in:
ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED
ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED
ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED
+
+BCM63138
+--------
+PLL and leaf clock compatible strings for BCM63138 are:
+ "brcm,bcm63138-armpll"
diff --git a/dts/Bindings/clock/cs2000-cp.txt b/dts/Bindings/clock/cs2000-cp.txt
new file mode 100644
index 0000000..54e6df0
--- /dev/null
+++ b/dts/Bindings/clock/cs2000-cp.txt
@@ -0,0 +1,22 @@
+CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier
+
+Required properties:
+
+- compatible: "cirrus,cs2000-cp"
+- reg: The chip select number on the I2C bus
+- clocks: common clock binding for CLK_IN, XTI/REF_CLK
+- clock-names: CLK_IN : clk_in, XTI/REF_CLK : ref_clk
+- #clock-cells: must be <0>
+
+Example:
+
+&i2c2 {
+ ...
+ cs2000: clk_multiplier@4f {
+ #clock-cells = <0>;
+ compatible = "cirrus,cs2000-cp";
+ reg = <0x4f>;
+ clocks = <&rcar_sound 0>, <&x12_clk>;
+ clock-names = "clk_in", "ref_clk";
+ };
+};
diff --git a/dts/Bindings/clock/dove-divider-clock.txt b/dts/Bindings/clock/dove-divider-clock.txt
new file mode 100644
index 0000000..e3eb0f6
--- /dev/null
+++ b/dts/Bindings/clock/dove-divider-clock.txt
@@ -0,0 +1,28 @@
+PLL divider based Dove clocks
+
+Marvell Dove has a 2GHz PLL, which feeds into a set of dividers to provide
+high speed clocks for a number of peripherals. These dividers are part of
+the PMU, and thus this node should be a child of the PMU node.
+
+The following clocks are provided:
+
+ID Clock
+-------------
+0 AXI bus clock
+1 GPU clock
+2 VMeta clock
+3 LCD clock
+
+Required properties:
+- compatible : shall be "marvell,dove-divider-clock"
+- reg : shall be the register address of the Core PLL and Clock Divider
+ Control 0 register. This will cover that register, as well as the
+ Core PLL and Clock Divider Control 1 register. Thus, it will have
+ a size of 8.
+- #clock-cells : from common clock binding; shall be set to 1
+
+divider_clk: core-clock@0064 {
+ compatible = "marvell,dove-divider-clock";
+ reg = <0x0064 0x8>;
+ #clock-cells = <1>;
+};
diff --git a/dts/Bindings/clock/nvidia,tegra210-car.txt b/dts/Bindings/clock/nvidia,tegra210-car.txt
new file mode 100644
index 0000000..26f237f
--- /dev/null
+++ b/dts/Bindings/clock/nvidia,tegra210-car.txt
@@ -0,0 +1,56 @@
+NVIDIA Tegra210 Clock And Reset Controller
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
+for muxing and gating Tegra's clocks, and setting their rates.
+
+Required properties :
+- compatible : Should be "nvidia,tegra210-car"
+- reg : Should contain CAR registers location and length
+- clocks : Should contain phandle and clock specifiers for two clocks:
+ the 32 KHz "32k_in".
+- #clock-cells : Should be 1.
+ In clock consumers, this cell represents the clock ID exposed by the
+ CAR. The assignments may be found in header file
+ <dt-bindings/clock/tegra210-car.h>.
+- #reset-cells : Should be 1.
+ In clock consumers, this cell represents the bit number in the CAR's
+ array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
+
+Example SoC include file:
+
+/ {
+ tegra_car: clock {
+ compatible = "nvidia,tegra210-car";
+ reg = <0x60006000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ usb@c5004000 {
+ clocks = <&tegra_car TEGRA210_CLK_USB2>;
+ };
+};
+
+Example board file:
+
+/ {
+ clocks {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clk_32k: clock@1 {
+ compatible = "fixed-clock";
+ reg = <1>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+ };
+
+ &tegra_car {
+ clocks = <&clk_32k>;
+ };
+};
diff --git a/dts/Bindings/clock/nxp,lpc3220-clk.txt b/dts/Bindings/clock/nxp,lpc3220-clk.txt
new file mode 100644
index 0000000..20cbca3
--- /dev/null
+++ b/dts/Bindings/clock/nxp,lpc3220-clk.txt
@@ -0,0 +1,30 @@
+NXP LPC32xx Clock Controller
+
+Required properties:
+- compatible: should be "nxp,lpc3220-clk"
+- reg: should contain clock controller registers location and length
+- #clock-cells: must be 1, the cell holds id of a clock provided by the
+ clock controller
+- clocks: phandles of external oscillators, the list must contain one
+ 32768 Hz oscillator and may have one optional high frequency oscillator
+- clock-names: list of external oscillator clock names, must contain
+ "xtal_32k" and may have optional "xtal"
+
+Examples:
+
+ /* System Control Block */
+ scb {
+ compatible = "simple-bus";
+ ranges = <0x0 0x040004000 0x00001000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ clk: clock-controller@0 {
+ compatible = "nxp,lpc3220-clk";
+ reg = <0x00 0x114>;
+ #clock-cells = <1>;
+
+ clocks = <&xtal_32k>, <&xtal>;
+ clock-names = "xtal_32k", "xtal";
+ };
+ };
diff --git a/dts/Bindings/clock/nxp,lpc3220-usb-clk.txt b/dts/Bindings/clock/nxp,lpc3220-usb-clk.txt
new file mode 100644
index 0000000..0aa2494
--- /dev/null
+++ b/dts/Bindings/clock/nxp,lpc3220-usb-clk.txt
@@ -0,0 +1,22 @@
+NXP LPC32xx USB Clock Controller
+
+Required properties:
+- compatible: should be "nxp,lpc3220-usb-clk"
+- reg: should contain clock controller registers location and length
+- #clock-cells: must be 1, the cell holds id of a clock provided by the
+ USB clock controller
+
+Examples:
+
+ usb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0x31020000 0x00001000>;
+
+ usbclk: clock-controller@f00 {
+ compatible = "nxp,lpc3220-usb-clk";
+ reg = <0xf00 0x100>;
+ #clock-cells = <1>;
+ };
+ };
diff --git a/dts/Bindings/clock/qcom,gcc.txt b/dts/Bindings/clock/qcom,gcc.txt
index 152dfaa..72f82f4 100644
--- a/dts/Bindings/clock/qcom,gcc.txt
+++ b/dts/Bindings/clock/qcom,gcc.txt
@@ -13,6 +13,7 @@ Required properties :
"qcom,gcc-msm8974"
"qcom,gcc-msm8974pro"
"qcom,gcc-msm8974pro-ac"
+ "qcom,gcc-msm8996"
- reg : shall contain base register location and length
- #clock-cells : shall contain 1
diff --git a/dts/Bindings/clock/qcom,mmcc.txt b/dts/Bindings/clock/qcom,mmcc.txt
index 34e7614..8b0f784 100644
--- a/dts/Bindings/clock/qcom,mmcc.txt
+++ b/dts/Bindings/clock/qcom,mmcc.txt
@@ -9,6 +9,7 @@ Required properties :
"qcom,mmcc-msm8660"
"qcom,mmcc-msm8960"
"qcom,mmcc-msm8974"
+ "qcom,mmcc-msm8996"
- reg : shall contain base register location and length
- #clock-cells : shall contain 1
diff --git a/dts/Bindings/clock/renesas,cpg-div6-clocks.txt b/dts/Bindings/clock/renesas,cpg-div6-clocks.txt
index 38dcf03..ae36ab8 100644
--- a/dts/Bindings/clock/renesas,cpg-div6-clocks.txt
+++ b/dts/Bindings/clock/renesas,cpg-div6-clocks.txt
@@ -20,6 +20,10 @@ Required Properties:
clocks must be specified. For clocks with multiple parents, invalid
settings must be specified as "<0>".
- #clock-cells: Must be 0
+
+
+Optional Properties:
+
- clock-output-names: The name of the clock as a free-form string
diff --git a/dts/Bindings/clock/renesas,h8300-div-clock.txt b/dts/Bindings/clock/renesas,h8300-div-clock.txt
index 36c2b52..399e0da 100644
--- a/dts/Bindings/clock/renesas,h8300-div-clock.txt
+++ b/dts/Bindings/clock/renesas,h8300-div-clock.txt
@@ -2,7 +2,7 @@
Required Properties:
- - compatible: Must be "renesas,sh73a0-h8300-div-clock"
+ - compatible: Must be "renesas,h8300-div-clock"
- clocks: Reference to the parent clocks ("extal1" and "extal2")
diff --git a/dts/Bindings/clock/rockchip,rk3036-cru.txt b/dts/Bindings/clock/rockchip,rk3036-cru.txt
new file mode 100644
index 0000000..ace0599
--- /dev/null
+++ b/dts/Bindings/clock/rockchip,rk3036-cru.txt
@@ -0,0 +1,56 @@
+* Rockchip RK3036 Clock and Reset Unit
+
+The RK3036 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3036-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_gmac" - external GMAC clock - optional
+
+Example: Clock controller node:
+
+ cru: cru@20000000 {
+ compatible = "rockchip,rk3036-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@20060000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x20060000 0x100>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/dts/Bindings/clock/rockchip,rk3228-cru.txt b/dts/Bindings/clock/rockchip,rk3228-cru.txt
new file mode 100644
index 0000000..f323048
--- /dev/null
+++ b/dts/Bindings/clock/rockchip,rk3228-cru.txt
@@ -0,0 +1,58 @@
+* Rockchip RK3228 Clock and Reset Unit
+
+The RK3228 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3228-cru"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+ If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_gmac" - external GMAC clock - optional
+ - "ext_hsadc" - external HSADC clock - optional
+ - "phy_50m_out" - output clock of the pll in the mac phy
+
+Example: Clock controller node:
+
+ cru: cru@20000000 {
+ compatible = "rockchip,rk3228-cru";
+ reg = <0x20000000 0x1000>;
+ rockchip,grf = <&grf>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+Example: UART controller node that consumes the clock generated by the clock
+ controller:
+
+ uart0: serial@10110000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x10110000 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&cru SCLK_UART0>;
+ };
diff --git a/dts/Bindings/clock/samsung,s2mps11.txt b/dts/Bindings/clock/samsung,s2mps11.txt
new file mode 100644
index 0000000..2726c1d
--- /dev/null
+++ b/dts/Bindings/clock/samsung,s2mps11.txt
@@ -0,0 +1,49 @@
+Binding for Samsung S2M and S5M family clock generator block
+============================================================
+
+This is a part of device tree bindings for S2M and S5M family multi-function
+devices.
+More information can be found in bindings/mfd/sec-core.txt file.
+
+The S2MPS11/13/15 and S5M8767 provide three(AP/CP/BT) buffered 32.768 kHz
+outputs. The S2MPS14 provides two (AP/BT) buffered 32.768 KHz outputs.
+
+To register these as clocks with common clock framework instantiate under
+main device node a sub-node named "clocks".
+
+It uses the common clock binding documented in:
+ - Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+
+Required properties of the "clocks" sub-node:
+ - #clock-cells: should be 1.
+ - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
+ "samsung,s2mps14-clk", "samsung,s5m8767-clk"
+ The S2MPS15 uses the same compatible as S2MPS13, as both provides similar
+ clocks.
+
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+ Clock ID Devices
+ ----------------------------------------------------------
+ 32KhzAP 0 S2MPS11/13/14/15, S5M8767
+ 32KhzCP 1 S2MPS11/13/15, S5M8767
+ 32KhzBT 2 S2MPS11/13/14/15, S5M8767
+
+Include dt-bindings/clock/samsung,s2mps11.h file to use preprocessor defines
+in device tree sources.
+
+
+Example:
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+
+ s2m_osc: clocks {
+ compatible = "samsung,s2mps11-clk";
+ #clock-cells = <1>;
+ clock-output-names = "xx", "yy", "zz";
+ };
+ };
diff --git a/dts/Bindings/clock/sunxi.txt b/dts/Bindings/clock/sunxi.txt
index 8a47b77..e59f57b 100644
--- a/dts/Bindings/clock/sunxi.txt
+++ b/dts/Bindings/clock/sunxi.txt
@@ -27,7 +27,9 @@ Required properties:
"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
+ "allwinner,sun9i-a80-cpus-clk" - for the CPUS on A80
"allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31
+ "allwinner,sun8i-h3-ahb2-clk" - for the AHB2 clock on H3
"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
"allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80
@@ -55,6 +57,9 @@ Required properties:
"allwinner,sun9i-a80-apb1-gates-clk" - for the APB1 gates on A80
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
+ "allwinner,sun8i-h3-bus-gates-clk" - for the bus gates on H3
+ "allwinner,sun9i-a80-apbs-gates-clk" - for the APBS gates on A80
+ "allwinner,sun4i-a10-dram-gates-clk" - for the DRAM gates on A10
"allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13
"allwinner,sun4i-a10-mmc-clk" - for the MMC clock
"allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80
@@ -68,8 +73,10 @@ Required properties:
"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
"allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
"allwinner,sun8i-a23-usb-clk" - for usb gates + resets on A23
+ "allwinner,sun8i-h3-usb-clk" - for usb gates + resets on H3
"allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80
"allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80
+ "allwinner,sun4i-a10-ve-clk" - for the Video Engine clock
Required properties for all clocks:
- reg : shall be the control register address for the clock.
@@ -89,6 +96,9 @@ Required properties for all clocks:
And "allwinner,*-usb-clk" clocks also require:
- reset-cells : shall be set to 1
+The "allwinner,sun4i-a10-ve-clk" clock also requires:
+- reset-cells : shall be set to 0
+
The "allwinner,sun9i-a80-mmc-config-clk" clock also requires:
- #reset-cells : shall be set to 1
- resets : shall be the reset control phandle for the mmc block.
diff --git a/dts/Bindings/clock/tango4-clock.txt b/dts/Bindings/clock/tango4-clock.txt
new file mode 100644
index 0000000..19c580a
--- /dev/null
+++ b/dts/Bindings/clock/tango4-clock.txt
@@ -0,0 +1,23 @@
+* Sigma Designs Tango4 Clock Generator
+
+The Tango4 clock generator outputs cpu_clk and sys_clk (the latter is used
+for RAM and various peripheral devices). The clock binding described here
+is applicable to all Tango4 SoCs.
+
+Required Properties:
+
+- compatible: should be "sigma,tango4-clkgen".
+- reg: physical base address of the device and length of memory mapped region.
+- clocks: phandle of the input clock (crystal oscillator).
+- clock-output-names: should be "cpuclk" and "sysclk".
+- #clock-cells: should be set to 1.
+
+Example:
+
+ clkgen: clkgen@10000 {
+ compatible = "sigma,tango4-clkgen";
+ reg = <0x10000 0x40>;
+ clocks = <&xtal>;
+ clock-output-names = "cpuclk", "sysclk";
+ #clock-cells = <1>;
+ };
diff --git a/dts/Bindings/cpufreq/arm_big_little_dt.txt b/dts/Bindings/cpufreq/arm_big_little_dt.txt
index 0715695..2aa06ac 100644
--- a/dts/Bindings/cpufreq/arm_big_little_dt.txt
+++ b/dts/Bindings/cpufreq/arm_big_little_dt.txt
@@ -12,7 +12,7 @@ must be present contiguously. Generic DT driver will check only node 'x' for
cpu:x.
Required properties:
-- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
+- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt
for details
Optional properties:
diff --git a/dts/Bindings/cpufreq/cpufreq-dt.txt b/dts/Bindings/cpufreq/cpufreq-dt.txt
index e41c98f..dd3929e 100644
--- a/dts/Bindings/cpufreq/cpufreq-dt.txt
+++ b/dts/Bindings/cpufreq/cpufreq-dt.txt
@@ -11,7 +11,7 @@ Required properties:
- None
Optional properties:
-- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for
+- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt for
details. OPPs *must* be supplied either via DT, i.e. this property, or
populated at runtime.
- clock-latency: Specify the possible maximum transition latency for clock,
diff --git a/dts/Bindings/cpufreq/cpufreq-st.txt b/dts/Bindings/cpufreq/cpufreq-st.txt
new file mode 100644
index 0000000..d91a02a
--- /dev/null
+++ b/dts/Bindings/cpufreq/cpufreq-st.txt
@@ -0,0 +1,91 @@
+Binding for ST's CPUFreq driver
+===============================
+
+ST's CPUFreq driver attempts to read 'process' and 'version' attributes
+from the SoC, then supplies the OPP framework with 'prop' and 'supported
+hardware' information respectively. The framework is then able to read
+the DT and operate in the usual way.
+
+For more information about the expected DT format [See: ../opp/opp.txt].
+
+Frequency Scaling only
+----------------------
+
+No vendor specific driver required for this.
+
+Located in CPU's node:
+
+- operating-points : [See: ../power/opp.txt]
+
+Example [safe]
+--------------
+
+cpus {
+ cpu@0 {
+ /* kHz uV */
+ operating-points = <1500000 0
+ 1200000 0
+ 800000 0
+ 500000 0>;
+ };
+};
+
+Dynamic Voltage and Frequency Scaling (DVFS)
+--------------------------------------------
+
+This requires the ST CPUFreq driver to supply 'process' and 'version' info.
+
+Located in CPU's node:
+
+- operating-points-v2 : [See ../power/opp.txt]
+
+Example [unsafe]
+----------------
+
+cpus {
+ cpu@0 {
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+};
+
+cpu0_opp_table: opp_table {
+ compatible = "operating-points-v2";
+
+ /* ############################################################### */
+ /* # WARNING: Do not attempt to copy/replicate these nodes, # */
+ /* # they are only to be supplied by the bootloader !!! # */
+ /* ############################################################### */
+ opp0 {
+ /* Major Minor Substrate */
+ /* 2 all all */
+ opp-supported-hw = <0x00000004 0xffffffff 0xffffffff>;
+ opp-hz = /bits/ 64 <1500000000>;
+ clock-latency-ns = <10000000>;
+
+ opp-microvolt-pcode0 = <1200000>;
+ opp-microvolt-pcode1 = <1200000>;
+ opp-microvolt-pcode2 = <1200000>;
+ opp-microvolt-pcode3 = <1200000>;
+ opp-microvolt-pcode4 = <1170000>;
+ opp-microvolt-pcode5 = <1140000>;
+ opp-microvolt-pcode6 = <1100000>;
+ opp-microvolt-pcode7 = <1070000>;
+ };
+
+ opp1 {
+ /* Major Minor Substrate */
+ /* all all all */
+ opp-supported-hw = <0xffffffff 0xffffffff 0xffffffff>;
+ opp-hz = /bits/ 64 <1200000000>;
+ clock-latency-ns = <10000000>;
+
+ opp-microvolt-pcode0 = <1110000>;
+ opp-microvolt-pcode1 = <1150000>;
+ opp-microvolt-pcode2 = <1100000>;
+ opp-microvolt-pcode3 = <1080000>;
+ opp-microvolt-pcode4 = <1040000>;
+ opp-microvolt-pcode5 = <1020000>;
+ opp-microvolt-pcode6 = <980000>;
+ opp-microvolt-pcode7 = <930000>;
+ };
+};
diff --git a/dts/Bindings/crypto/rockchip-crypto.txt b/dts/Bindings/crypto/rockchip-crypto.txt
new file mode 100644
index 0000000..096df34
--- /dev/null
+++ b/dts/Bindings/crypto/rockchip-crypto.txt
@@ -0,0 +1,29 @@
+Rockchip Electronics And Security Accelerator
+
+Required properties:
+- compatible: Should be "rockchip,rk3288-crypto"
+- reg: Base physical address of the engine and length of memory mapped
+ region
+- interrupts: Interrupt number
+- clocks: Reference to the clocks about crypto
+- clock-names: "aclk" used to clock data
+ "hclk" used to clock data
+ "sclk" used to clock crypto accelerator
+ "apb_pclk" used to clock dma
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the name "crypto-rst".
+
+Examples:
+
+ crypto: cypto-controller@ff8a0000 {
+ compatible = "rockchip,rk3288-crypto";
+ reg = <0xff8a0000 0x4000>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_CRYPTO>, <&cru HCLK_CRYPTO>,
+ <&cru SCLK_CRYPTO>, <&cru ACLK_DMAC1>;
+ clock-names = "aclk", "hclk", "sclk", "apb_pclk";
+ resets = <&cru SRST_CRYPTO>;
+ reset-names = "crypto-rst";
+ status = "okay";
+ };
diff --git a/dts/Bindings/display/bridge/tda998x.txt b/dts/Bindings/display/bridge/tda998x.txt
index e9e4bce..e178e6b 100644
--- a/dts/Bindings/display/bridge/tda998x.txt
+++ b/dts/Bindings/display/bridge/tda998x.txt
@@ -5,6 +5,10 @@ Required properties;
- reg: I2C address
+Required node:
+ - port: Input port node with endpoint definition, as described
+ in Documentation/devicetree/bindings/graph.txt
+
Optional properties:
- interrupts: interrupt number and trigger type
default: polling
diff --git a/dts/Bindings/display/etnaviv/etnaviv-drm.txt b/dts/Bindings/display/etnaviv/etnaviv-drm.txt
new file mode 100644
index 0000000..ed5e0a7
--- /dev/null
+++ b/dts/Bindings/display/etnaviv/etnaviv-drm.txt
@@ -0,0 +1,54 @@
+Etnaviv DRM master device
+=========================
+
+The Etnaviv DRM master device is a virtual device needed to list all
+Vivante GPU cores that comprise the GPU subsystem.
+
+Required properties:
+- compatible: Should be one of
+ "fsl,imx-gpu-subsystem"
+ "marvell,dove-gpu-subsystem"
+- cores: Should contain a list of phandles pointing to Vivante GPU devices
+
+example:
+
+gpu-subsystem {
+ compatible = "fsl,imx-gpu-subsystem";
+ cores = <&gpu_2d>, <&gpu_3d>;
+};
+
+
+Vivante GPU core devices
+========================
+
+Required properties:
+- compatible: Should be "vivante,gc"
+ A more specific compatible is not needed, as the cores contain chip
+ identification registers at fixed locations, which provide all the
+ necessary information to the driver.
+- reg: should be register base and length as documented in the
+ datasheet
+- interrupts: Should contain the cores interrupt line
+- clocks: should contain one clock for entry in clock-names
+ see Documentation/devicetree/bindings/clock/clock-bindings.txt
+- clock-names:
+ - "bus": AXI/register clock
+ - "core": GPU core clock
+ - "shader": Shader clock (only required if GPU has feature PIPE_3D)
+
+Optional properties:
+- power-domains: a power domain consumer specifier according to
+ Documentation/devicetree/bindings/power/power_domain.txt
+
+example:
+
+gpu_3d: gpu@00130000 {
+ compatible = "vivante,gc";
+ reg = <0x00130000 0x4000>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+ <&clks IMX6QDL_CLK_GPU3D_CORE>,
+ <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+ clock-names = "bus", "core", "shader";
+ power-domains = <&gpc 1>;
+};
diff --git a/dts/Bindings/display/exynos/exynos_dp.txt b/dts/Bindings/display/exynos/exynos_dp.txt
index 64693f2..fe4a7a2 100644
--- a/dts/Bindings/display/exynos/exynos_dp.txt
+++ b/dts/Bindings/display/exynos/exynos_dp.txt
@@ -1,3 +1,20 @@
+Device-Tree bindings for Samsung Exynos Embedded DisplayPort Transmitter(eDP)
+
+DisplayPort is industry standard to accommodate the growing board adoption
+of digital display technology within the PC and CE industries.
+It consolidates the internal and external connection methods to reduce device
+complexity and cost. It also supports necessary features for important cross
+industry applications and provides performance scalability to enable the next
+generation of displays that feature higher color depths, refresh rates, and
+display resolutions.
+
+eDP (embedded display port) device is compliant with Embedded DisplayPort
+standard as follows,
+- DisplayPort standard 1.1a for Exynos5250 and Exynos5260.
+- DisplayPort standard 1.3 for Exynos5422s and Exynos5800.
+
+eDP resides between FIMD and panel or FIMD and bridge such as LVDS.
+
The Exynos display port interface should be configured based on
the type of panel connected to it.
@@ -66,8 +83,15 @@ Optional properties for dp-controller:
Hotplug detect GPIO.
Indicates which GPIO should be used for hotplug
detection
- -video interfaces: Device node can contain video interface port
- nodes according to [1].
+Video interfaces:
+ Device node can contain video interface port nodes according to [1].
+ The following are properties specific to those nodes:
+
+ endpoint node connected to bridge or panel node:
+ - remote-endpoint: specifies the endpoint in panel or bridge node.
+ This node is required in all kinds of exynos dp
+ to represent the connection between dp and bridge
+ or dp and panel.
[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -111,9 +135,18 @@ Board Specific portion:
};
ports {
- port@0 {
+ port {
dp_out: endpoint {
- remote-endpoint = <&bridge_in>;
+ remote-endpoint = <&dp_in>;
+ };
+ };
+ };
+
+ panel {
+ ...
+ port {
+ dp_in: endpoint {
+ remote-endpoint = <&dp_out>;
};
};
};
diff --git a/dts/Bindings/display/exynos/exynos_hdmi.txt b/dts/Bindings/display/exynos/exynos_hdmi.txt
index 1fd8cf9..d474f59 100644
--- a/dts/Bindings/display/exynos/exynos_hdmi.txt
+++ b/dts/Bindings/display/exynos/exynos_hdmi.txt
@@ -2,10 +2,9 @@ Device-Tree bindings for drm hdmi driver
Required properties:
- compatible: value should be one among the following:
- 1) "samsung,exynos5-hdmi" <DEPRECATED>
- 2) "samsung,exynos4210-hdmi"
- 3) "samsung,exynos4212-hdmi"
- 4) "samsung,exynos5420-hdmi"
+ 1) "samsung,exynos4210-hdmi"
+ 2) "samsung,exynos4212-hdmi"
+ 3) "samsung,exynos5420-hdmi"
- reg: physical base address of the hdmi and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
diff --git a/dts/Bindings/display/msm/dsi.txt b/dts/Bindings/display/msm/dsi.txt
index f344b9e..e7423be 100644
--- a/dts/Bindings/display/msm/dsi.txt
+++ b/dts/Bindings/display/msm/dsi.txt
@@ -14,17 +14,20 @@ Required properties:
- clocks: device clocks
See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
- clock-names: the following clocks are required:
+ * "mdp_core_clk"
+ * "iface_clk"
* "bus_clk"
- * "byte_clk"
- * "core_clk"
* "core_mmss_clk"
- * "iface_clk"
- * "mdp_core_clk"
+ * "byte_clk"
* "pixel_clk"
+ * "core_clk"
+ For DSIv2, we need an additional clock:
+ * "src_clk"
- vdd-supply: phandle to vdd regulator device node
- vddio-supply: phandle to vdd-io regulator device node
- vdda-supply: phandle to vdda regulator device node
- qcom,dsi-phy: phandle to DSI PHY device node
+- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
Optional properties:
- panel@0: Node of panel connected to this DSI controller.
@@ -51,6 +54,7 @@ Required properties:
* "qcom,dsi-phy-28nm-hpm"
* "qcom,dsi-phy-28nm-lp"
* "qcom,dsi-phy-20nm"
+ * "qcom,dsi-phy-28nm-8960"
- reg: Physical base address and length of the registers of PLL, PHY and PHY
regulator
- reg-names: The names of register regions. The following regions are required:
diff --git a/dts/Bindings/display/msm/mdp.txt b/dts/Bindings/display/msm/mdp.txt
index 0833eda..a214f6c 100644
--- a/dts/Bindings/display/msm/mdp.txt
+++ b/dts/Bindings/display/msm/mdp.txt
@@ -2,18 +2,28 @@ Qualcomm adreno/snapdragon display controller
Required properties:
- compatible:
- * "qcom,mdp" - mdp4
+ * "qcom,mdp4" - mdp4
+ * "qcom,mdp5" - mdp5
- reg: Physical base address and length of the controller's registers.
- interrupts: The interrupt signal from the display controller.
- connectors: array of phandles for output device(s)
- clocks: device clocks
See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required:
- * "core_clk"
- * "iface_clk"
- * "src_clk"
- * "hdmi_clk"
- * "mpd_clk"
+- clock-names: the following clocks are required.
+ For MDP4:
+ * "core_clk"
+ * "iface_clk"
+ * "lut_clk"
+ * "src_clk"
+ * "hdmi_clk"
+ * "mdp_clk"
+ For MDP5:
+ * "bus_clk"
+ * "iface_clk"
+ * "core_clk_src"
+ * "core_clk"
+ * "lut_clk" (some MDP5 versions may not need this)
+ * "vsync_clk"
Optional properties:
- gpus: phandle for gpu device
@@ -26,7 +36,7 @@ Example:
...
mdp: qcom,mdp@5100000 {
- compatible = "qcom,mdp";
+ compatible = "qcom,mdp4";
reg = <0x05100000 0xf0000>;
interrupts = <GIC_SPI 75 0>;
connectors = <&hdmi>;
diff --git a/dts/Bindings/display/panel/boe,tv080wum-nl0.txt b/dts/Bindings/display/panel/boe,tv080wum-nl0.txt
new file mode 100644
index 0000000..50be5e2
--- /dev/null
+++ b/dts/Bindings/display/panel/boe,tv080wum-nl0.txt
@@ -0,0 +1,7 @@
+Boe Corporation 8.0" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,tv080wum-nl0"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/innolux,g121x1-l03.txt b/dts/Bindings/display/panel/innolux,g121x1-l03.txt
new file mode 100644
index 0000000..6497446
--- /dev/null
+++ b/dts/Bindings/display/panel/innolux,g121x1-l03.txt
@@ -0,0 +1,7 @@
+Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,g121x1-l03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/kyo,tcg121xglp.txt b/dts/Bindings/display/panel/kyo,tcg121xglp.txt
new file mode 100644
index 0000000..a8e940f
--- /dev/null
+++ b/dts/Bindings/display/panel/kyo,tcg121xglp.txt
@@ -0,0 +1,7 @@
+Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel
+
+Required properties:
+- compatible: should be "kyo,tcg121xglp"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/panasonic,vvx10f034n00.txt b/dts/Bindings/display/panel/panasonic,vvx10f034n00.txt
new file mode 100644
index 0000000..37dedf6
--- /dev/null
+++ b/dts/Bindings/display/panel/panasonic,vvx10f034n00.txt
@@ -0,0 +1,20 @@
+Panasonic 10" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "panasonic,vvx10f034n00"
+- reg: DSI virtual channel of the peripheral
+- power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+ mdss_dsi@fd922800 {
+ panel@0 {
+ compatible = "panasonic,vvx10f034n00";
+ reg = <0>;
+ power-supply = <&vreg_vsp>;
+ backlight = <&lp8566_wled>;
+ };
+ };
diff --git a/dts/Bindings/display/panel/qiaodian,qd43003c0-40.txt b/dts/Bindings/display/panel/qiaodian,qd43003c0-40.txt
new file mode 100644
index 0000000..0fbdab8
--- /dev/null
+++ b/dts/Bindings/display/panel/qiaodian,qd43003c0-40.txt
@@ -0,0 +1,7 @@
+QiaoDian XianShi Corporation 4"3 TFT LCD panel
+
+Required properties:
+- compatible: should be "qiaodian,qd43003c0-40"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/dts/Bindings/display/panel/sharp,ls043t1le01.txt b/dts/Bindings/display/panel/sharp,ls043t1le01.txt
new file mode 100644
index 0000000..3770a11
--- /dev/null
+++ b/dts/Bindings/display/panel/sharp,ls043t1le01.txt
@@ -0,0 +1,22 @@
+Sharp Microelectronics 4.3" qHD TFT LCD panel
+
+Required properties:
+- compatible: should be "sharp,ls043t1le01-qhd"
+- reg: DSI virtual channel of the peripheral
+- power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+- reset-gpios: a GPIO spec for the reset pin
+
+Example:
+
+ mdss_dsi@fd922800 {
+ panel@0 {
+ compatible = "sharp,ls043t1le01-qhd";
+ reg = <0>;
+ avdd-supply = <&pm8941_l22>;
+ backlight = <&pm8941_wled>;
+ reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
+ };
+ };
diff --git a/dts/Bindings/display/panel/startek,startek-kd050c.txt b/dts/Bindings/display/panel/startek,startek-kd050c.txt
new file mode 100644
index 0000000..70cd8d1
--- /dev/null
+++ b/dts/Bindings/display/panel/startek,startek-kd050c.txt
@@ -0,0 +1,4 @@
+Startek Electronic Technology Co. KD050C 5.0" WVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "startek,startek-kd050c"
diff --git a/dts/Bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/dts/Bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
new file mode 100644
index 0000000..1753f0c
--- /dev/null
+++ b/dts/Bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
@@ -0,0 +1,60 @@
+Rockchip specific extensions to the Synopsys Designware MIPI DSI
+================================
+
+Required properties:
+- #address-cells: Should be <1>.
+- #size-cells: Should be <0>.
+- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
+- reg: Represent the physical address range of the controller.
+- interrupts: Represent the controller's interrupt to the CPU(s).
+- clocks, clock-names: Phandles to the controller's pll reference
+ clock(ref) and APB clock(pclk), as described in [1].
+- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+- ports: contain a port node with endpoint definitions as defined in [2].
+ For vopb,set the reg = <0> and set the reg = <1> for vopl.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+ mipi_dsi: mipi@ff960000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+ reg = <0xff960000 0x4000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+ clock-names = "ref", "pclk";
+ rockchip,grf = <&grf>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ mipi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mipi_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_mipi>;
+ };
+ mipi_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_mipi>;
+ };
+ };
+ };
+
+ panel {
+ compatible ="boe,tv080wum-nl0";
+ reg = <0>;
+
+ enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_en>;
+ backlight = <&backlight>;
+ status = "okay";
+ };
+ };
diff --git a/dts/Bindings/display/rockchip/rockchip-vop.txt b/dts/Bindings/display/rockchip/rockchip-vop.txt
index d15351f..5489b59 100644
--- a/dts/Bindings/display/rockchip/rockchip-vop.txt
+++ b/dts/Bindings/display/rockchip/rockchip-vop.txt
@@ -7,6 +7,7 @@ buffer to an external LCD interface.
Required properties:
- compatible: value should be one of the following
"rockchip,rk3288-vop";
+ "rockchip,rk3036-vop";
- interrupts: should contain a list of all VOP IP block interrupts in the
order: VSYNC, LCD_SYSTEM. The interrupt specifier
diff --git a/dts/Bindings/display/simple-framebuffer.txt b/dts/Bindings/display/simple-framebuffer.txt
index 4474ef6..8c9e9f5 100644
--- a/dts/Bindings/display/simple-framebuffer.txt
+++ b/dts/Bindings/display/simple-framebuffer.txt
@@ -47,10 +47,14 @@ Required properties:
- a8b8g8r8 (32-bit pixels, d[31:24]=a, d[23:16]=b, d[15:8]=g, d[7:0]=r).
Optional properties:
-- clocks : List of clocks used by the framebuffer. Clocks listed here
- are expected to already be configured correctly. The OS must
- ensure these clocks are not modified or disabled while the
- simple framebuffer remains active.
+- clocks : List of clocks used by the framebuffer.
+- *-supply : Any number of regulators used by the framebuffer. These should
+ be named according to the names in the device's design.
+
+ The above resources are expected to already be configured correctly.
+ The OS must ensure they are not modified or disabled while the simple
+ framebuffer remains active.
+
- display : phandle pointing to the primary display hardware node
Example:
@@ -68,6 +72,7 @@ chosen {
stride = <(1600 * 2)>;
format = "r5g6b5";
clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>;
+ lcd-supply = <&reg_dc1sw>;
display = <&lcdc0>;
};
stdout-path = "display0";
diff --git a/dts/Bindings/dma/renesas,rcar-dmac.txt b/dts/Bindings/dma/renesas,rcar-dmac.txt
index 09daeef..5b902ac 100644
--- a/dts/Bindings/dma/renesas,rcar-dmac.txt
+++ b/dts/Bindings/dma/renesas,rcar-dmac.txt
@@ -14,7 +14,14 @@ not described in these device tree bindings.
Required Properties:
-- compatible: must contain "renesas,rcar-dmac"
+- compatible: "renesas,dmac-<soctype>", "renesas,rcar-dmac" as fallback.
+ Examples with soctypes are:
+ - "renesas,dmac-r8a7790" (R-Car H2)
+ - "renesas,dmac-r8a7791" (R-Car M2-W)
+ - "renesas,dmac-r8a7792" (R-Car V2H)
+ - "renesas,dmac-r8a7793" (R-Car M2-N)
+ - "renesas,dmac-r8a7794" (R-Car E2)
+ - "renesas,dmac-r8a7795" (R-Car H3)
- reg: base address and length of the registers block for the DMAC
@@ -35,7 +42,7 @@ Required Properties:
Example: R8A7790 (R-Car H2) SYS-DMACs
dmac0: dma-controller@e6700000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
reg = <0 0xe6700000 0 0x20000>;
interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
0 200 IRQ_TYPE_LEVEL_HIGH
@@ -65,7 +72,7 @@ Example: R8A7790 (R-Car H2) SYS-DMACs
};
dmac1: dma-controller@e6720000 {
- compatible = "renesas,rcar-dmac";
+ compatible = "renesas,dmac-r8a7790", "renesas,rcar-dmac";
reg = <0 0xe6720000 0 0x20000>;
interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
0 216 IRQ_TYPE_LEVEL_HIGH
diff --git a/dts/Bindings/dma/renesas,usb-dmac.txt b/dts/Bindings/dma/renesas,usb-dmac.txt
index 040f365..e7780a1 100644
--- a/dts/Bindings/dma/renesas,usb-dmac.txt
+++ b/dts/Bindings/dma/renesas,usb-dmac.txt
@@ -1,7 +1,13 @@
* Renesas USB DMA Controller Device Tree bindings
Required Properties:
-- compatible: must contain "renesas,usb-dmac"
+-compatible: "renesas,<soctype>-usb-dmac", "renesas,usb-dmac" as fallback.
+ Examples with soctypes are:
+ - "renesas,r8a7790-usb-dmac" (R-Car H2)
+ - "renesas,r8a7791-usb-dmac" (R-Car M2-W)
+ - "renesas,r8a7793-usb-dmac" (R-Car M2-N)
+ - "renesas,r8a7794-usb-dmac" (R-Car E2)
+ - "renesas,r8a7795-usb-dmac" (R-Car H3)
- reg: base address and length of the registers block for the DMAC
- interrupts: interrupt specifiers for the DMAC, one for each entry in
interrupt-names.
@@ -15,7 +21,7 @@ Required Properties:
Example: R8A7790 (R-Car H2) USB-DMACs
usb_dmac0: dma-controller@e65a0000 {
- compatible = "renesas,usb-dmac";
+ compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
0 109 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/Bindings/dma/stm32-dma.txt b/dts/Bindings/dma/stm32-dma.txt
new file mode 100644
index 0000000..70cd13f
--- /dev/null
+++ b/dts/Bindings/dma/stm32-dma.txt
@@ -0,0 +1,82 @@
+* STMicroelectronics STM32 DMA controller
+
+The STM32 DMA is a general-purpose direct memory access controller capable of
+supporting 8 independent DMA channels. Each channel can have up to 8 requests.
+
+Required properties:
+- compatible: Should be "st,stm32-dma"
+- reg: Should contain DMA registers location and length. This should include
+ all of the per-channel registers.
+- interrupts: Should contain all of the per-channel DMA interrupts in
+ ascending order with respect to the DMA channel index.
+- clocks: Should contain the input clock of the DMA instance.
+- #dma-cells : Must be <4>. See DMA client paragraph for more details.
+
+Optional properties:
+- resets: Reference to a reset controller asserting the DMA controller
+- st,mem2mem: boolean; if defined, it indicates that the controller supports
+ memory-to-memory transfer
+
+Example:
+
+ dma2: dma-controller@40026400 {
+ compatible = "st,stm32-dma";
+ reg = <0x40026400 0x400>;
+ interrupts = <56>,
+ <57>,
+ <58>,
+ <59>,
+ <60>,
+ <68>,
+ <69>,
+ <70>;
+ clocks = <&clk_hclk>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ resets = <&rcc 150>;
+ };
+
+* DMA client
+
+DMA clients connected to the STM32 DMA controller must use the format
+described in the dma.txt file, using a five-cell specifier for each
+channel: a phandle plus four integer cells.
+The four cells in order are:
+
+1. The channel id
+2. The request line number
+3. A 32bit mask specifying the DMA channel configuration which are device
+ dependent:
+ -bit 9: Peripheral Increment Address
+ 0x0: no address increment between transfers
+ 0x1: increment address between transfers
+ -bit 10: Memory Increment Address
+ 0x0: no address increment between transfers
+ 0x1: increment address between transfers
+ -bit 15: Peripheral Increment Offset Size
+ 0x0: offset size is linked to the peripheral bus width
+ 0x1: offset size is fixed to 4 (32-bit alignment)
+ -bit 16-17: Priority level
+ 0x0: low
+ 0x1: medium
+ 0x2: high
+ 0x3: very high
+5. A 32bit mask specifying the DMA FIFO threshold configuration which are device
+ dependent:
+ -bit 0-1: Fifo threshold
+ 0x0: 1/4 full FIFO
+ 0x1: 1/2 full FIFO
+ 0x2: 3/4 full FIFO
+ 0x3: full FIFO
+
+Example:
+
+ usart1: serial@40011000 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40011000 0x400>;
+ interrupts = <37>;
+ clocks = <&clk_pclk2>;
+ dmas = <&dma2 2 4 0x10400 0x3>,
+ <&dma2 7 5 0x10200 0x3>;
+ dma-names = "rx", "tx";
+ };
diff --git a/dts/Bindings/dma/ti-dma-crossbar.txt b/dts/Bindings/dma/ti-dma-crossbar.txt
index b152a75..aead586 100644
--- a/dts/Bindings/dma/ti-dma-crossbar.txt
+++ b/dts/Bindings/dma/ti-dma-crossbar.txt
@@ -14,6 +14,10 @@ The DMA controller node need to have the following poroperties:
Optional properties:
- ti,dma-safe-map: Safe routing value for unused request lines
+- ti,reserved-dma-request-ranges: DMA request ranges which should not be used
+ when mapping xbar input to DMA request, they are either
+ allocated to be used by for example the DSP or they are used as
+ memcpy channels in eDMA.
Notes:
When requesting channel via ti,dra7-dma-crossbar, the DMA clinet must request
@@ -46,6 +50,8 @@ sdma_xbar: dma-router@4a002b78 {
#dma-cells = <1>;
dma-requests = <205>;
ti,dma-safe-map = <0>;
+ /* Protect the sDMA request ranges: 10-14 and 100-126 */
+ ti,reserved-dma-request-ranges = <10 5>, <100 27>;
dma-masters = <&sdma>;
};
diff --git a/dts/Bindings/eeprom/eeprom.txt b/dts/Bindings/eeprom/eeprom.txt
index 4342c10..735bc94 100644
--- a/dts/Bindings/eeprom/eeprom.txt
+++ b/dts/Bindings/eeprom/eeprom.txt
@@ -2,11 +2,22 @@ EEPROMs (I2C)
Required properties:
- - compatible : should be "<manufacturer>,<type>"
- If there is no specific driver for <manufacturer>, a generic
- driver based on <type> is selected. Possible types are:
- 24c00, 24c01, 24c02, 24c04, 24c08, 24c16, 24c32, 24c64,
- 24c128, 24c256, 24c512, 24c1024, spd
+ - compatible : should be "<manufacturer>,<type>", like these:
+
+ "atmel,24c00", "atmel,24c01", "atmel,24c02", "atmel,24c04",
+ "atmel,24c08", "atmel,24c16", "atmel,24c32", "atmel,24c64",
+ "atmel,24c128", "atmel,24c256", "atmel,24c512", "atmel,24c1024"
+
+ "catalyst,24c32"
+
+ "ramtron,24c64"
+
+ "renesas,r1ex24002"
+
+ If there is no specific driver for <manufacturer>, a generic
+ driver based on <type> is selected. Possible types are:
+ "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64",
+ "24c128", "24c256", "24c512", "24c1024", "spd"
- reg : the I2C address of the EEPROM
diff --git a/dts/Bindings/extcon/extcon-arizona.txt b/dts/Bindings/extcon/extcon-arizona.txt
index e1705fa..e27341f 100644
--- a/dts/Bindings/extcon/extcon-arizona.txt
+++ b/dts/Bindings/extcon/extcon-arizona.txt
@@ -13,3 +13,63 @@ Optional properties:
ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR
If this node is not mentioned or if the value is unknown, then
headphone detection mode is set to HPDETL.
+
+ - wlf,use-jd2 : Use the additional JD input along with JD1 for dual pin jack
+ detection.
+ - wlf,use-jd2-nopull : Internal pull on JD2 is disabled when used for
+ jack detection.
+ - wlf,jd-invert : Invert the polarity of the jack detection switch
+
+ - wlf,micd-software-compare : Use a software comparison to determine mic
+ presence
+ - wlf,micd-detect-debounce : Additional software microphone detection
+ debounce specified in milliseconds.
+ - wlf,micd-pol-gpio : GPIO specifier for the GPIO controlling the headset
+ polarity if one exists.
+ - wlf,micd-bias-start-time : Time allowed for MICBIAS to startup prior to
+ performing microphone detection, specified as per the ARIZONA_MICD_TIME_XXX
+ defines.
+ - wlf,micd-rate : Delay between successive microphone detection measurements,
+ specified as per the ARIZONA_MICD_TIME_XXX defines.
+ - wlf,micd-dbtime : Microphone detection hardware debounces specified as the
+ number of measurements to take, valid values being 2 and 4.
+ - wlf,micd-timeout-ms : Timeout for microphone detection, specified in
+ milliseconds.
+ - wlf,micd-force-micbias : Force MICBIAS continuously on during microphone
+ detection.
+ - wlf,micd-configs : Headset polarity configurations (generally used for
+ detection of CTIA / OMTP headsets), the field can be of variable length
+ but should always be a multiple of 3 cells long, each three cell group
+ represents one polarity configuration.
+ The first cell defines the accessory detection pin, zero will use MICDET1
+ and all other values will use MICDET2.
+ The second cell represents the MICBIAS to be used.
+ The third cell represents the value of the micd-pol-gpio pin.
+
+ - wlf,gpsw : Settings for the general purpose switch
+
+Example:
+
+codec: wm8280@0 {
+ compatible = "wlf,wm8280";
+ reg = <0>;
+ ...
+
+ wlf,use-jd2;
+ wlf,use-jd2-nopull;
+ wlf,jd-invert;
+
+ wlf,micd-software-compare;
+ wlf,micd-detect-debounce = <0>;
+ wlf,micd-pol-gpio = <&codec 2 0>;
+ wlf,micd-rate = <ARIZONA_MICD_TIME_8MS>;
+ wlf,micd-dbtime = <4>;
+ wlf,micd-timeout-ms = <100>;
+ wlf,micd-force-micbias;
+ wlf,micd-configs = <
+ 0 1 0 /* MICDET1 MICBIAS1 GPIO=low */
+ 1 2 1 /* MICDET2 MICBIAS2 GPIO=high */
+ >;
+
+ wlf,gpsw = <0>;
+};
diff --git a/dts/Bindings/extcon/extcon-max3355.txt b/dts/Bindings/extcon/extcon-max3355.txt
new file mode 100644
index 0000000..f2288ea
--- /dev/null
+++ b/dts/Bindings/extcon/extcon-max3355.txt
@@ -0,0 +1,21 @@
+Maxim Integrated MAX3355 USB OTG chip
+-------------------------------------
+
+MAX3355 integrates a charge pump and comparators to enable a system with an
+integrated USB OTG dual-role transceiver to function as a USB OTG dual-role
+device.
+
+Required properties:
+- compatible: should be "maxim,max3355";
+- maxim,shdn-gpios: should contain a phandle and GPIO specifier for the GPIO pin
+ connected to the MAX3355's SHDN# pin;
+- id-gpios: should contain a phandle and GPIO specifier for the GPIO pin
+ connected to the MAX3355's ID_OUT pin.
+
+Example:
+
+ usb-otg {
+ compatible = "maxim,max3355";
+ maxim,shdn-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+ id-gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/dts/Bindings/gpio/gpio-pca953x.txt b/dts/Bindings/gpio/gpio-pca953x.txt
index 13df993..6b4a98f 100644
--- a/dts/Bindings/gpio/gpio-pca953x.txt
+++ b/dts/Bindings/gpio/gpio-pca953x.txt
@@ -25,6 +25,7 @@ Required properties:
ti,tca6416
ti,tca6424
ti,tca9539
+ onsemi,pca9654
exar,xra1202
Example:
diff --git a/dts/Bindings/gpio/gpio-sx150x.txt b/dts/Bindings/gpio/gpio-sx150x.txt
index ba2bb84..c809acb 100644
--- a/dts/Bindings/gpio/gpio-sx150x.txt
+++ b/dts/Bindings/gpio/gpio-sx150x.txt
@@ -5,7 +5,8 @@ Required properties:
- compatible: should be "semtech,sx1506q",
"semtech,sx1508q",
- "semtech,sx1509q".
+ "semtech,sx1509q",
+ "semtech,sx1502q".
- reg: The I2C slave address for this device.
diff --git a/dts/Bindings/gpio/gpio-tps65086.txt b/dts/Bindings/gpio/gpio-tps65086.txt
new file mode 100644
index 0000000..ba05107
--- /dev/null
+++ b/dts/Bindings/gpio/gpio-tps65086.txt
@@ -0,0 +1,16 @@
+* TPS65086 GPO Controller bindings
+
+Required properties:
+ - compatible : Should be "ti,tps65086-gpio".
+ - gpio-controller : Marks the device node as a GPIO Controller.
+ - #gpio-cells : Should be two. The first cell is the pin number
+ and the second cell is used to specify flags.
+ See ../gpio/gpio.txt for possible values.
+
+Example:
+
+ gpio4: gpio {
+ compatible = "ti,tps65086-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
diff --git a/dts/Bindings/gpio/snps-dwapb-gpio.txt b/dts/Bindings/gpio/snps-dwapb-gpio.txt
index dd5d2c0..4d6c8cd 100644
--- a/dts/Bindings/gpio/snps-dwapb-gpio.txt
+++ b/dts/Bindings/gpio/snps-dwapb-gpio.txt
@@ -24,7 +24,7 @@ controller.
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt. Shall be set to 2. The first cell defines the interrupt number,
the second encodes the triger flags encoded as described in
- Documentation/devicetree/bindings/interrupts.txt
+ Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- interrupt-parent : The parent interrupt controller.
- interrupts : The interrupt to the parent controller raised when GPIOs
generate the interrupts.
diff --git a/dts/Bindings/i2c/i2c-at91.txt b/dts/Bindings/i2c/i2c-at91.txt
index 6e81dc1..ef973a0 100644
--- a/dts/Bindings/i2c/i2c-at91.txt
+++ b/dts/Bindings/i2c/i2c-at91.txt
@@ -3,7 +3,7 @@ I2C for Atmel platforms
Required properties :
- compatible : Must be "atmel,at91rm9200-i2c", "atmel,at91sam9261-i2c",
"atmel,at91sam9260-i2c", "atmel,at91sam9g20-i2c", "atmel,at91sam9g10-i2c",
- "atmel,at91sam9x5-i2c" or "atmel,sama5d2-i2c"
+ "atmel,at91sam9x5-i2c", "atmel,sama5d4-i2c" or "atmel,sama5d2-i2c"
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
@@ -17,6 +17,8 @@ Optional properties:
- dma-names: should contain "tx" and "rx".
- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
capable I2C controllers.
+- i2c-sda-hold-time-ns: TWD hold time, only available for "atmel,sama5d4-i2c"
+ and "atmel,sama5d2-i2c".
- Child nodes conforming to i2c bus binding
Examples :
@@ -52,6 +54,7 @@ i2c0: i2c@f8034600 {
#size-cells = <0>;
clocks = <&flx0>;
atmel,fifo-size = <16>;
+ i2c-sda-hold-time-ns = <336>;
wm8731: wm8731@1a {
compatible = "wm8731";
diff --git a/dts/Bindings/i2c/i2c-brcmstb.txt b/dts/Bindings/i2c/i2c-brcmstb.txt
index d6f724e..aeceace 100644
--- a/dts/Bindings/i2c/i2c-brcmstb.txt
+++ b/dts/Bindings/i2c/i2c-brcmstb.txt
@@ -2,7 +2,7 @@ Broadcom stb bsc iic master controller
Required properties:
-- compatible: should be "brcm,brcmstb-i2c"
+- compatible: should be "brcm,brcmstb-i2c" or "brcm,brcmper-i2c"
- clock-frequency: 32-bit decimal value of iic master clock freqency in Hz
valid values are 375000, 390000, 187500, 200000
93750, 97500, 46875 and 50000
diff --git a/dts/Bindings/i2c/i2c-rcar.txt b/dts/Bindings/i2c/i2c-rcar.txt
index ea406eb..95e9722 100644
--- a/dts/Bindings/i2c/i2c-rcar.txt
+++ b/dts/Bindings/i2c/i2c-rcar.txt
@@ -20,6 +20,10 @@ Optional properties:
propoerty indicates the default frequency 100 kHz.
- clocks: clock specifier.
+- i2c-scl-falling-time-ns: see i2c.txt
+- i2c-scl-internal-delay-ns: see i2c.txt
+- i2c-scl-rising-time-ns: see i2c.txt
+
Examples :
i2c0: i2c@e6508000 {
diff --git a/dts/Bindings/i2c/i2c.txt b/dts/Bindings/i2c/i2c.txt
index 8a99150..c8d977e 100644
--- a/dts/Bindings/i2c/i2c.txt
+++ b/dts/Bindings/i2c/i2c.txt
@@ -29,12 +29,38 @@ Optional properties
These properties may not be supported by all drivers. However, if a driver
wants to support one of the below features, it should adapt the bindings below.
-- clock-frequency - frequency of bus clock in Hz.
-- wakeup-source - device can be used as a wakeup source.
+- clock-frequency
+ frequency of bus clock in Hz.
-- interrupts - interrupts used by the device.
-- interrupt-names - "irq" and "wakeup" names are recognized by I2C core,
- other names are left to individual drivers.
+- i2c-scl-falling-time-ns
+ Number of nanoseconds the SCL signal takes to fall; t(f) in the I2C
+ specification.
+
+- i2c-scl-internal-delay-ns
+ Number of nanoseconds the IP core additionally needs to setup SCL.
+
+- i2c-scl-rising-time-ns
+ Number of nanoseconds the SCL signal takes to rise; t(r) in the I2C
+ specification.
+
+- i2c-sda-falling-time-ns
+ Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C
+ specification.
+
+- interrupts
+ interrupts used by the device.
+
+- interrupt-names
+ "irq" and "wakeup" names are recognized by I2C core, other names are
+ left to individual drivers.
+
+- multi-master
+ states that there is another master active on this bus. The OS can use
+ this information to adapt power management to keep the arbitration awake
+ all the time, for example.
+
+- wakeup-source
+ device can be used as a wakeup source.
Binding may contain optional "interrupts" property, describing interrupts
used by the device. I2C core will assign "irq" interrupt (or the very first
diff --git a/dts/Bindings/i2c/trivial-devices.txt b/dts/Bindings/i2c/trivial-devices.txt
index c50cf13..5398744 100644
--- a/dts/Bindings/i2c/trivial-devices.txt
+++ b/dts/Bindings/i2c/trivial-devices.txt
@@ -20,22 +20,11 @@ adi,adt7476 +/-1C TDM Extended Temp Range I.C
adi,adt7490 +/-1C TDM Extended Temp Range I.C
adi,adxl345 Three-Axis Digital Accelerometer
adi,adxl346 Three-Axis Digital Accelerometer (backward-compatibility value "adi,adxl345" must be listed too)
+ams,iaq-core AMS iAQ-Core VOC Sensor
at,24c08 i2c serial eeprom (24cxx)
-atmel,24c00 i2c serial eeprom (24cxx)
-atmel,24c01 i2c serial eeprom (24cxx)
-atmel,24c02 i2c serial eeprom (24cxx)
-atmel,24c04 i2c serial eeprom (24cxx)
-atmel,24c16 i2c serial eeprom (24cxx)
-atmel,24c32 i2c serial eeprom (24cxx)
-atmel,24c64 i2c serial eeprom (24cxx)
-atmel,24c128 i2c serial eeprom (24cxx)
-atmel,24c256 i2c serial eeprom (24cxx)
-atmel,24c512 i2c serial eeprom (24cxx)
-atmel,24c1024 i2c serial eeprom (24cxx)
atmel,at97sc3204t i2c trusted platform module (TPM)
capella,cm32181 CM32181: Ambient Light Sensor
capella,cm3232 CM3232: Ambient Light Sensor
-catalyst,24c32 i2c serial eeprom
cirrus,cs42l51 Cirrus Logic CS42L51 audio codec
dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock
dallas,ds1338 I2C RTC with 56-Byte NV RAM
@@ -49,11 +38,13 @@ dallas,ds4510 CPU Supervisor with Nonvolatile Memory and Programmable I/O
dallas,ds75 Digital Thermometer and Thermostat
dlg,da9053 DA9053: flexible system level PMIC with multicore support
dlg,da9063 DA9063: system PMIC for quad-core application processors
+epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE
epson,rx8025 High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE
epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE
fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer
fsl,mc13892 MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51
fsl,mma8450 MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer
+fsl,mpl3115 MPL3115: Absolute Digital Pressure Sensor
fsl,mpr121 MPR121: Proximity Capacitive Touch Sensor Controller
fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec
gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface
@@ -80,7 +71,6 @@ ovti,ov5642 OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI an
pericom,pt7c4338 Real-time Clock Module
plx,pex8648 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
pulsedlight,lidar-lite-v2 Pulsedlight LIDAR range-finding sensor
-ramtron,24c64 i2c serial eeprom (24cxx)
ricoh,r2025sd I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
ricoh,r2221tl I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
ricoh,rs5c372a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC
diff --git a/dts/Bindings/iio/accel/mma8452.txt b/dts/Bindings/iio/accel/mma8452.txt
index e3c3746..3c10e85 100644
--- a/dts/Bindings/iio/accel/mma8452.txt
+++ b/dts/Bindings/iio/accel/mma8452.txt
@@ -7,13 +7,18 @@ Required properties:
* "fsl,mma8453"
* "fsl,mma8652"
* "fsl,mma8653"
+
- reg: the I2C address of the chip
Optional properties:
- interrupt-parent: should be the phandle for the interrupt controller
+
- interrupts: interrupt mapping for GPIO IRQ
+ - interrupt-names: should contain "INT1" and/or "INT2", the accelerometer's
+ interrupt line in use.
+
Example:
mma8453fc@1d {
@@ -21,4 +26,5 @@ Example:
reg = <0x1d>;
interrupt-parent = <&gpio1>;
interrupts = <5 0>;
+ interrupt-names = "INT2";
};
diff --git a/dts/Bindings/iio/adc/imx7d-adc.txt b/dts/Bindings/iio/adc/imx7d-adc.txt
new file mode 100644
index 0000000..5c184b9
--- /dev/null
+++ b/dts/Bindings/iio/adc/imx7d-adc.txt
@@ -0,0 +1,22 @@
+Freescale imx7d ADC bindings
+
+The devicetree bindings are for the ADC driver written for
+imx7d SoC.
+
+Required properties:
+- compatible: Should be "fsl,imx7d-adc"
+- reg: Offset and length of the register set for the ADC device
+- interrupts: The interrupt number for the ADC device
+- clocks: The root clock of the ADC controller
+- clock-names: Must contain "adc", matching entry in the clocks property
+- vref-supply: The regulator supply ADC reference voltage
+
+Example:
+adc1: adc@30610000 {
+ compatible = "fsl,imx7d-adc";
+ reg = <0x30610000 0x10000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+ clock-names = "adc";
+ vref-supply = <&reg_vcc_3v3_mcu>;
+};
diff --git a/dts/Bindings/iio/adc/mcp320x.txt b/dts/Bindings/iio/adc/mcp320x.txt
index 2a1f3af..bcd3ac8 100644
--- a/dts/Bindings/iio/adc/mcp320x.txt
+++ b/dts/Bindings/iio/adc/mcp320x.txt
@@ -10,16 +10,28 @@ must be specified.
Required properties:
- compatible: Must be one of the following, depending on the
model:
- "mcp3001"
- "mcp3002"
- "mcp3004"
- "mcp3008"
- "mcp3201"
- "mcp3202"
- "mcp3204"
- "mcp3208"
- "mcp3301"
+ "mcp3001" (DEPRECATED)
+ "mcp3002" (DEPRECATED)
+ "mcp3004" (DEPRECATED)
+ "mcp3008" (DEPRECATED)
+ "mcp3201" (DEPRECATED)
+ "mcp3202" (DEPRECATED)
+ "mcp3204" (DEPRECATED)
+ "mcp3208" (DEPRECATED)
+ "mcp3301" (DEPRECATED)
+ "microchip,mcp3001"
+ "microchip,mcp3002"
+ "microchip,mcp3004"
+ "microchip,mcp3008"
+ "microchip,mcp3201"
+ "microchip,mcp3202"
+ "microchip,mcp3204"
+ "microchip,mcp3208"
+ "microchip,mcp3301"
+
+ NOTE: The use of the compatibles with no vendor prefix
+ is deprecated and only listed because old DT use them.
Examples:
spi_controller {
diff --git a/dts/Bindings/iio/adc/mcp3422.txt b/dts/Bindings/iio/adc/mcp3422.txt
index 333139c..dcae4cc 100644
--- a/dts/Bindings/iio/adc/mcp3422.txt
+++ b/dts/Bindings/iio/adc/mcp3422.txt
@@ -1,7 +1,8 @@
-* Microchip mcp3422/3/4/6/7/8 chip family (ADC)
+* Microchip mcp3421/2/3/4/6/7/8 chip family (ADC)
Required properties:
- compatible: Should be
+ "microchip,mcp3421" or
"microchip,mcp3422" or
"microchip,mcp3423" or
"microchip,mcp3424" or
diff --git a/dts/Bindings/iio/adc/palmas-gpadc.txt b/dts/Bindings/iio/adc/palmas-gpadc.txt
new file mode 100644
index 0000000..4bb9a86
--- /dev/null
+++ b/dts/Bindings/iio/adc/palmas-gpadc.txt
@@ -0,0 +1,48 @@
+* Palmas general purpose ADC IP block devicetree bindings
+
+Channels list:
+ 0 battery type
+ 1 battery temp NTC (optional current source)
+ 2 GP
+ 3 temp (with ext. diode, optional current source)
+ 4 GP
+ 5 GP
+ 6 VBAT_SENSE
+ 7 VCC_SENSE
+ 8 Backup Battery voltage
+ 9 external charger (VCHG)
+ 10 VBUS
+ 11 DC-DC current probe (how does this work?)
+ 12 internal die temp
+ 13 internal die temp
+ 14 USB ID pin voltage
+ 15 test network
+
+Required properties:
+- compatible : Must be "ti,palmas-gpadc".
+- #io-channel-cells: Should be set to <1>.
+
+Optional sub-nodes:
+ti,channel0-current-microamp: Channel 0 current in uA.
+ Values are rounded to derive 0uA, 5uA, 15uA, 20uA.
+ti,channel3-current-microamp: Channel 3 current in uA.
+ Values are rounded to derive 0uA, 10uA, 400uA, 800uA.
+ti,enable-extended-delay: Enable extended delay.
+
+Example:
+
+pmic {
+ compatible = "ti,twl6035-pmic", "ti,palmas-pmic";
+ ...
+ gpadc {
+ compatible = "ti,palmas-gpadc";
+ interrupts = <18 0
+ 16 0
+ 17 0>;
+ #io-channel-cells = <1>;
+ ti,channel0-current-microamp = <5>;
+ ti,channel3-current-microamp = <10>;
+ };
+ };
+ ...
+};
diff --git a/dts/Bindings/iio/adc/ti-adc128s052.txt b/dts/Bindings/iio/adc/ti-adc128s052.txt
index 15ca6b4..daa2b2c 100644
--- a/dts/Bindings/iio/adc/ti-adc128s052.txt
+++ b/dts/Bindings/iio/adc/ti-adc128s052.txt
@@ -1,7 +1,7 @@
-* Texas Instruments' ADC128S052 and ADC122S021 ADC chip
+* Texas Instruments' ADC128S052, ADC122S021 and ADC124S021 ADC chip
Required properties:
- - compatible: Should be "ti,adc128s052" or "ti,adc122s021"
+ - compatible: Should be "ti,adc128s052", "ti,adc122s021" or "ti,adc124s021"
- reg: spi chip select number for the device
- vref-supply: The regulator supply for ADC reference voltage
diff --git a/dts/Bindings/iio/adc/ti-ads8688.txt b/dts/Bindings/iio/adc/ti-ads8688.txt
new file mode 100644
index 0000000..a02337d
--- /dev/null
+++ b/dts/Bindings/iio/adc/ti-ads8688.txt
@@ -0,0 +1,20 @@
+* Texas Instruments' ADS8684 and ADS8688 ADC chip
+
+Required properties:
+ - compatible: Should be "ti,ads8684" or "ti,ads8688"
+ - reg: spi chip select number for the device
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+ - vref-supply: The regulator supply for ADC reference voltage
+
+Example:
+adc@0 {
+ compatible = "ti,ads8688";
+ reg = <0>;
+ vref-supply = <&vdd_supply>;
+ spi-max-frequency = <1000000>;
+};
diff --git a/dts/Bindings/iio/health/max30100.txt b/dts/Bindings/iio/health/max30100.txt
new file mode 100644
index 0000000..f6fbac6
--- /dev/null
+++ b/dts/Bindings/iio/health/max30100.txt
@@ -0,0 +1,21 @@
+Maxim MAX30100 heart rate and pulse oximeter sensor
+
+* https://datasheets.maximintegrated.com/en/ds/MAX30100.pdf
+
+Required properties:
+ - compatible: must be "maxim,max30100"
+ - reg: the I2C address of the sensor
+ - interrupt-parent: should be the phandle for the interrupt controller
+ - interrupts: the sole interrupt generated by the device
+
+ Refer to interrupt-controller/interrupts.txt for generic
+ interrupt client node bindings.
+
+Example:
+
+max30100@057 {
+ compatible = "maxim,max30100";
+ reg = <57>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <16 2>;
+};
diff --git a/dts/Bindings/iio/light/us5182d.txt b/dts/Bindings/iio/light/us5182d.txt
index 6f0a530..a619799 100644
--- a/dts/Bindings/iio/light/us5182d.txt
+++ b/dts/Bindings/iio/light/us5182d.txt
@@ -7,13 +7,24 @@ Required properties:
Optional properties:
- upisemi,glass-coef: glass attenuation factor - compensation factor of
resolution 1000 for material transmittance.
+
- upisemi,dark-ths: array of 8 elements containing 16-bit thresholds (adc
counts) corresponding to every scale.
+
- upisemi,upper-dark-gain: 8-bit dark gain compensation factor(4 int and 4
fractional bits - Q4.4) applied when light > threshold
+
- upisemi,lower-dark-gain: 8-bit dark gain compensation factor(4 int and 4
fractional bits - Q4.4) applied when light < threshold
+- upisemi,continuous: This chip has two power modes: one-shot (chip takes one
+ measurement and then shuts itself down) and continuous (
+ chip takes continuous measurements). The one-shot mode is
+ more power-friendly but the continuous mode may be more
+ reliable. If this property is specified the continuous
+ mode will be used instead of the default one-shot one for
+ raw reads.
+
If the optional properties are not specified these factors will default to the
values in the below example.
The glass-coef defaults to no compensation for the covering material.
diff --git a/dts/Bindings/iio/st-sensors.txt b/dts/Bindings/iio/st-sensors.txt
index d3ccdb1..d4b87cc 100644
--- a/dts/Bindings/iio/st-sensors.txt
+++ b/dts/Bindings/iio/st-sensors.txt
@@ -36,6 +36,7 @@ Accelerometers:
- st,lsm303dlm-accel
- st,lsm330-accel
- st,lsm303agr-accel
+- st,lis2dh12-accel
Gyroscopes:
- st,l3g4200d-gyro
diff --git a/dts/Bindings/input/gpio-keys.txt b/dts/Bindings/input/gpio-keys.txt
index cf1333d..2164123 100644
--- a/dts/Bindings/input/gpio-keys.txt
+++ b/dts/Bindings/input/gpio-keys.txt
@@ -6,6 +6,7 @@ Required properties:
Optional properties:
- autorepeat: Boolean, Enable auto repeat feature of Linux input
subsystem.
+ - label: String, name of the input device.
Each button (key) is represented as a sub-node of "gpio-keys":
Subnode properties:
diff --git a/dts/Bindings/input/touchscreen/goodix.txt b/dts/Bindings/input/touchscreen/goodix.txt
index 8ba98ee..c98757a 100644
--- a/dts/Bindings/input/touchscreen/goodix.txt
+++ b/dts/Bindings/input/touchscreen/goodix.txt
@@ -13,6 +13,17 @@ Required properties:
- interrupt-parent : Interrupt controller to which the chip is connected
- interrupts : Interrupt to which the chip is connected
+Optional properties:
+
+ - irq-gpios : GPIO pin used for IRQ. The driver uses the
+ interrupt gpio pin as output to reset the device.
+ - reset-gpios : GPIO pin used for reset
+
+ - touchscreen-inverted-x : X axis is inverted (boolean)
+ - touchscreen-inverted-y : Y axis is inverted (boolean)
+ - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
+ (swapping is done after inverting the axis)
+
Example:
i2c@00000000 {
@@ -23,6 +34,9 @@ Example:
reg = <0x5d>;
interrupt-parent = <&gpio>;
interrupts = <0 0>;
+
+ irq-gpios = <&gpio1 0 0>;
+ reset-gpios = <&gpio1 1 0>;
};
/* ... */
diff --git a/dts/Bindings/input/touchscreen/pixcir_i2c_ts.txt b/dts/Bindings/input/touchscreen/pixcir_i2c_ts.txt
index 8eb240a..697a3e7 100644
--- a/dts/Bindings/input/touchscreen/pixcir_i2c_ts.txt
+++ b/dts/Bindings/input/touchscreen/pixcir_i2c_ts.txt
@@ -9,7 +9,9 @@ Required properties:
- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
Optional properties:
-- reset-gpio: GPIO connected to the RESET line of the chip
+- reset-gpios: GPIO connected to the RESET line of the chip
+- enable-gpios: GPIO connected to the ENABLE line of the chip
+- wake-gpios: GPIO connected to the WAKE line of the chip
Example:
diff --git a/dts/Bindings/input/touchscreen/ts4800-ts.txt b/dts/Bindings/input/touchscreen/ts4800-ts.txt
new file mode 100644
index 0000000..4c1c092
--- /dev/null
+++ b/dts/Bindings/input/touchscreen/ts4800-ts.txt
@@ -0,0 +1,11 @@
+* TS-4800 Touchscreen bindings
+
+Required properties:
+- compatible: must be "technologic,ts4800-ts"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- syscon: phandle / integers array that points to the syscon node which
+ describes the FPGA's syscon registers.
+ - phandle to FPGA's syscon
+ - offset to the touchscreen register
+ - offset to the touchscreen enable bit
diff --git a/dts/Bindings/interrupt-controller/allwinner,sun67i-sc-nmi.txt b/dts/Bindings/interrupt-controller/allwinner,sunxi-nmi.txt
index d1c5cda..81cd369 100644
--- a/dts/Bindings/interrupt-controller/allwinner,sun67i-sc-nmi.txt
+++ b/dts/Bindings/interrupt-controller/allwinner,sunxi-nmi.txt
@@ -4,7 +4,7 @@ Allwinner Sunxi NMI Controller
Required properties:
- compatible : should be "allwinner,sun7i-a20-sc-nmi" or
- "allwinner,sun6i-a31-sc-nmi"
+ "allwinner,sun6i-a31-sc-nmi" or "allwinner,sun9i-a80-nmi"
- reg : Specifies base physical address and size of the registers.
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
diff --git a/dts/Bindings/interrupt-controller/arm,gic.txt b/dts/Bindings/interrupt-controller/arm,gic.txt
index cc56021..5a1cb4b 100644
--- a/dts/Bindings/interrupt-controller/arm,gic.txt
+++ b/dts/Bindings/interrupt-controller/arm,gic.txt
@@ -18,6 +18,7 @@ Main node required properties:
"arm,cortex-a9-gic"
"arm,gic-400"
"arm,pl390"
+ "arm,tc11mp-gic"
"brcm,brahma-b15-gic"
"qcom,msm-8660-qgic"
"qcom,msm-qgic2"
diff --git a/dts/Bindings/interrupt-controller/hisilicon,mbigen-v2.txt b/dts/Bindings/interrupt-controller/hisilicon,mbigen-v2.txt
new file mode 100644
index 0000000..720f7c9
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/hisilicon,mbigen-v2.txt
@@ -0,0 +1,74 @@
+Hisilicon mbigen device tree bindings.
+=======================================
+
+Mbigen means: message based interrupt generator.
+
+MBI is kind of msi interrupt only used on Non-PCI devices.
+
+To reduce the wired interrupt number connected to GIC,
+Hisilicon designed mbigen to collect and generate interrupt.
+
+
+Non-pci devices can connect to mbigen and generate the
+interrupt by writing ITS register.
+
+The mbigen chip and devices connect to mbigen have the following properties:
+
+Mbigen main node required properties:
+-------------------------------------------
+- compatible: Should be "hisilicon,mbigen-v2"
+
+- reg: Specifies the base physical address and size of the Mbigen
+ registers.
+
+- interrupt controller: Identifies the node as an interrupt controller
+
+- msi-parent: Specifies the MSI controller this mbigen use.
+ For more detail information,please refer to the generic msi-parent binding in
+ Documentation/devicetree/bindings/interrupt-controller/msi.txt.
+
+- num-pins: the total number of pins implemented in this Mbigen
+ instance.
+
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value must be 2.
+
+ The 1st cell is hardware pin number of the interrupt.This number is local to
+ each mbigen chip and in the range from 0 to the maximum interrupts number
+ of the mbigen.
+
+ The 2nd cell is the interrupt trigger type.
+ The value of this cell should be:
+ 1: rising edge triggered
+ or
+ 4: high level triggered
+
+Examples:
+
+ mbigen_device_gmac:intc {
+ compatible = "hisilicon,mbigen-v2";
+ reg = <0x0 0xc0080000 0x0 0x10000>;
+ interrupt-controller;
+ msi-parent = <&its_dsa 0x40b1c>;
+ num-pins = <9>;
+ #interrupt-cells = <2>;
+ };
+
+Devices connect to mbigen required properties:
+----------------------------------------------------
+-interrupt-parent: Specifies the mbigen device node which device connected.
+
+-interrupts:Specifies the interrupt source.
+ For the specific information of each cell in this property,please refer to
+ the "interrupt-cells" description mentioned above.
+
+Examples:
+ gmac0: ethernet@c2080000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0xc2080000 0 0x20000>,
+ <0 0xc0000000 0 0x1000>;
+ interrupt-parent = <&mbigen_device_gmac>;
+ interrupts = <656 1>,
+ <657 1>;
+ };
diff --git a/dts/Bindings/interrupt-controller/mediatek,sysirq.txt b/dts/Bindings/interrupt-controller/mediatek,sysirq.txt
index afef6a8..b8e1674 100644
--- a/dts/Bindings/interrupt-controller/mediatek,sysirq.txt
+++ b/dts/Bindings/interrupt-controller/mediatek,sysirq.txt
@@ -14,6 +14,7 @@ Required properties:
"mediatek,mt6582-sysirq"
"mediatek,mt6580-sysirq"
"mediatek,mt6577-sysirq"
+ "mediatek,mt2701-sysirq"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Use the same format as specified by GIC in
Documentation/devicetree/bindings/arm/gic.txt
diff --git a/dts/Bindings/interrupt-controller/microchip,pic32-evic.txt b/dts/Bindings/interrupt-controller/microchip,pic32-evic.txt
new file mode 100644
index 0000000..c3a1b37
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/microchip,pic32-evic.txt
@@ -0,0 +1,67 @@
+Microchip PIC32 Interrupt Controller
+====================================
+
+The Microchip PIC32 contains an Enhanced Vectored Interrupt Controller (EVIC).
+It handles all internal and external interrupts. This controller exists outside
+of the CPU and is the arbitrator of all interrupts (including interrupts from
+the CPU itself) before they are presented to the CPU.
+
+External interrupts have a software configurable edge polarity. Non external
+interrupts have a type and polarity that is determined by the source of the
+interrupt.
+
+Required properties
+-------------------
+
+- compatible: Should be "microchip,pic32mzda-evic"
+- reg: Specifies physical base address and size of register range.
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt cells: Specifies the number of cells used to encode an interrupt
+ source connected to this controller. The value shall be 2 and interrupt
+ descriptor shall have the following format:
+
+ <hw_irq irq_type>
+
+ hw_irq - represents the hardware interrupt number as in the data sheet.
+ irq_type - is used to describe the type and polarity of an interrupt. For
+ internal interrupts use IRQ_TYPE_EDGE_RISING for non persistent interrupts and
+ IRQ_TYPE_LEVEL_HIGH for persistent interrupts. For external interrupts use
+ IRQ_TYPE_EDGE_RISING or IRQ_TYPE_EDGE_FALLING to select the desired polarity.
+
+Optional properties
+-------------------
+- microchip,external-irqs: u32 array of external interrupts with software
+ polarity configuration. This array corresponds to the bits in the INTCON
+ SFR.
+
+Example
+-------
+
+evic: interrupt-controller@1f810000 {
+ compatible = "microchip,pic32mzda-evic";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1f810000 0x1000>;
+ microchip,external-irqs = <3 8 13 18 23>;
+};
+
+Each device/peripheral must request its interrupt line with the associated type
+and polarity.
+
+Internal interrupt DTS snippet
+------------------------------
+
+device@1f800000 {
+ ...
+ interrupts = <113 IRQ_TYPE_LEVEL_HIGH>;
+ ...
+};
+
+External interrupt DTS snippet
+------------------------------
+
+device@1f800000 {
+ ...
+ interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+ ...
+};
diff --git a/dts/Bindings/interrupt-controller/qca,ath79-misc-intc.txt b/dts/Bindings/interrupt-controller/qca,ath79-misc-intc.txt
index ec96b1f..475ae9b 100644
--- a/dts/Bindings/interrupt-controller/qca,ath79-misc-intc.txt
+++ b/dts/Bindings/interrupt-controller/qca,ath79-misc-intc.txt
@@ -22,7 +22,7 @@ Interrupt Controllers bindings used by client devices.
Example:
interrupt-controller@18060010 {
- compatible = "qca,ar9132-misc-intc", qca,ar7100-misc-intc";
+ compatible = "qca,ar9132-misc-intc", "qca,ar7100-misc-intc";
reg = <0x18060010 0x4>;
interrupt-parent = <&cpuintc>;
diff --git a/dts/Bindings/interrupt-controller/technologic,ts4800.txt b/dts/Bindings/interrupt-controller/technologic,ts4800.txt
new file mode 100644
index 0000000..7f15f1b
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/technologic,ts4800.txt
@@ -0,0 +1,16 @@
+TS-4800 FPGA interrupt controller
+
+TS-4800 FPGA has an internal interrupt controller. When one of the
+interrupts is triggered, the SoC is notified, usually using a GPIO as
+parent interrupt source.
+
+Required properties:
+- compatible: should be "technologic,ts4800-irqc"
+- interrupt-controller: identifies the node as an interrupt controller
+- reg: physical base address of the controller and length of memory mapped
+ region
+- #interrupt-cells: specifies the number of cells needed to encode an interrupt
+ source, should be 1.
+- interrupt-parent: phandle to the parent interrupt controller this one is
+ cascaded from
+- interrupts: specifies the interrupt line in the interrupt-parent controller
diff --git a/dts/Bindings/iommu/renesas,ipmmu-vmsa.txt b/dts/Bindings/iommu/renesas,ipmmu-vmsa.txt
index cd29083..48ffb38 100644
--- a/dts/Bindings/iommu/renesas,ipmmu-vmsa.txt
+++ b/dts/Bindings/iommu/renesas,ipmmu-vmsa.txt
@@ -7,7 +7,15 @@ connected to the IPMMU through a port called micro-TLB.
Required Properties:
- - compatible: Must contain "renesas,ipmmu-vmsa".
+ - compatible: Must contain SoC-specific and generic entries from below.
+
+ - "renesas,ipmmu-r8a73a4" for the R8A73A4 (R-Mobile APE6) IPMMU.
+ - "renesas,ipmmu-r8a7790" for the R8A7790 (R-Car H2) IPMMU.
+ - "renesas,ipmmu-r8a7791" for the R8A7791 (R-Car M2-W) IPMMU.
+ - "renesas,ipmmu-r8a7793" for the R8A7793 (R-Car M2-N) IPMMU.
+ - "renesas,ipmmu-r8a7794" for the R8A7794 (R-Car E2) IPMMU.
+ - "renesas,ipmmu-vmsa" for generic R-Car Gen2 VMSA-compatible IPMMU.
+
- reg: Base address and size of the IPMMU registers.
- interrupts: Specifiers for the MMU fault interrupts. For instances that
support secure mode two interrupts must be specified, for non-secure and
@@ -27,7 +35,7 @@ node with the following property:
Example: R8A7791 IPMMU-MX and VSP1-D0 bus master
ipmmu_mx: mmu@fe951000 {
- compatible = "renasas,ipmmu-vmsa";
+ compatible = "renasas,ipmmu-r8a7791", "renasas,ipmmu-vmsa";
reg = <0 0xfe951000 0 0x1000>;
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
<0 221 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/Bindings/media/exynos5-gsc.txt b/dts/Bindings/media/exynos5-gsc.txt
index 0604d42..5fe9372 100644
--- a/dts/Bindings/media/exynos5-gsc.txt
+++ b/dts/Bindings/media/exynos5-gsc.txt
@@ -7,6 +7,10 @@ Required properties:
- reg: should contain G-Scaler physical address location and length.
- interrupts: should contain G-Scaler interrupt number
+Optional properties:
+- samsung,sysreg: handle to syscon used to control the system registers to
+ set writeback input and destination
+
Example:
gsc_0: gsc@0x13e00000 {
diff --git a/dts/Bindings/media/i2c/adp1653.txt b/dts/Bindings/media/i2c/adp1653.txt
index 5ce66f2..4cce0de 100644
--- a/dts/Bindings/media/i2c/adp1653.txt
+++ b/dts/Bindings/media/i2c/adp1653.txt
@@ -12,12 +12,13 @@ There are two LED outputs available - flash and indicator. One LED is
represented by one child node, nodes need to be named "flash" and "indicator".
Required properties of the LED child node:
-- max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
Required properties of the flash LED child node:
- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
+- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
Example:
@@ -29,9 +30,9 @@ Example:
flash {
flash-timeout-us = <500000>;
flash-max-microamp = <320000>;
- max-microamp = <50000>;
+ led-max-microamp = <50000>;
};
indicator {
- max-microamp = <17500>;
+ led-max-microamp = <17500>;
};
};
diff --git a/dts/Bindings/media/stih407-c8sectpfe.txt b/dts/Bindings/media/stih407-c8sectpfe.txt
index d4def76..cc51b1f 100644
--- a/dts/Bindings/media/stih407-c8sectpfe.txt
+++ b/dts/Bindings/media/stih407-c8sectpfe.txt
@@ -35,7 +35,7 @@ Required properties (tsin (child) node):
- tsin-num : tsin id of the InputBlock (must be between 0 to 6)
- i2c-bus : phandle to the I2C bus DT node which the demodulators & tuners on this tsin channel are connected.
-- rst-gpio : reset gpio for this tsin channel.
+- reset-gpios : reset gpio for this tsin channel.
Optional properties (tsin (child) node):
@@ -55,27 +55,27 @@ Example:
status = "okay";
reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>;
reg-names = "stfe", "stfe-ram";
- interrupts = <0 34 0>, <0 35 0>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_NONE>, <GIC_SPI 35 IRQ_TYPE_NONE>;
interrupt-names = "stfe-error-irq", "stfe-idle-irq";
-
- pinctrl-names = "tsin0-serial", "tsin0-parallel", "tsin3-serial",
- "tsin4-serial", "tsin5-serial";
-
pinctrl-0 = <&pinctrl_tsin0_serial>;
pinctrl-1 = <&pinctrl_tsin0_parallel>;
pinctrl-2 = <&pinctrl_tsin3_serial>;
pinctrl-3 = <&pinctrl_tsin4_serial_alt3>;
pinctrl-4 = <&pinctrl_tsin5_serial_alt1>;
-
+ pinctrl-names = "tsin0-serial",
+ "tsin0-parallel",
+ "tsin3-serial",
+ "tsin4-serial",
+ "tsin5-serial";
clocks = <&clk_s_c0_flexgen CLK_PROC_STFE>;
- clock-names = "stfe";
+ clock-names = "c8sectpfe";
/* tsin0 is TSA on NIMA */
tsin0: port@0 {
tsin-num = <0>;
serial-not-parallel;
i2c-bus = <&ssc2>;
- rst-gpio = <&pio15 4 0>;
+ reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
dvb-card = <STV0367_TDA18212_NIMA_1>;
};
@@ -83,7 +83,7 @@ Example:
tsin-num = <3>;
serial-not-parallel;
i2c-bus = <&ssc3>;
- rst-gpio = <&pio15 7 0>;
+ reset-gpios = <&pio15 7 GPIO_ACTIVE_HIGH>;
dvb-card = <STV0367_TDA18212_NIMB_1>;
};
};
diff --git a/dts/Bindings/memory-controllers/ath79-ddr-controller.txt b/dts/Bindings/memory-controllers/ath79-ddr-controller.txt
index efe35a0..c81af75 100644
--- a/dts/Bindings/memory-controllers/ath79-ddr-controller.txt
+++ b/dts/Bindings/memory-controllers/ath79-ddr-controller.txt
@@ -1,6 +1,6 @@
Binding for Qualcomm Atheros AR7xxx/AR9xxx DDR controller
-The DDR controller of the ARxxx and AR9xxx families provides an interface
+The DDR controller of the AR7xxx and AR9xxx families provides an interface
to flush the FIFO between various devices and the DDR. This is mainly used
by the IRQ controller to flush the FIFO before running the interrupt handler
of such devices.
@@ -11,9 +11,9 @@ Required properties:
"qca,[ar7100|ar7240]-ddr-controller" as fallback.
On SoC with PCI support "qca,ar7100-ddr-controller" should be used as
fallback, otherwise "qca,ar7240-ddr-controller" should be used.
-- reg: Base address and size of the controllers memory area
-- #qca,ddr-wb-channel-cells: has to be 1, the index of the write buffer
- channel
+- reg: Base address and size of the controller's memory area
+- #qca,ddr-wb-channel-cells: Specifies the number of cells needed to encode
+ the write buffer channel index, should be 1.
Example:
diff --git a/dts/Bindings/mfd/arizona.txt b/dts/Bindings/mfd/arizona.txt
index 18be0cb..9b30011 100644
--- a/dts/Bindings/mfd/arizona.txt
+++ b/dts/Bindings/mfd/arizona.txt
@@ -1,4 +1,4 @@
-Wolfson Arizona class audio SoCs
+Cirrus Logic/Wolfson Microelectronics Arizona class audio SoCs
These devices are audio SoCs with extensive digital capabilites and a range
of analogue I/O.
@@ -6,12 +6,14 @@ of analogue I/O.
Required properties:
- compatible : One of the following chip-specific strings:
+ "cirrus,cs47l24"
"wlf,wm5102"
"wlf,wm5110"
"wlf,wm8280"
"wlf,wm8997"
"wlf,wm8998"
"wlf,wm1814"
+ "wlf,wm1831"
- reg : I2C slave address when connected using I2C, chip select number when
using SPI.
@@ -24,7 +26,7 @@ Required properties:
- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
The first cell is the IRQ number.
The second cell is the flags, encoded as the trigger masks from
- Documentation/devicetree/bindings/interrupts.txt
+ Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- gpio-controller : Indicates this device is a GPIO controller.
- #gpio-cells : Must be 2. The first cell is the pin number and the
@@ -41,10 +43,21 @@ Required properties:
- SPKVDD-supply : Speaker driver power supply (wm8997)
+ - DCVDD-supply : Main power supply (cs47l24, wm1831)
+
+ - MICVDD-supply : Microphone power supply (cs47l24, wm1831)
+
Optional properties:
- wlf,reset : GPIO specifier for the GPIO controlling /RESET
+ - clocks: Should reference the clocks supplied on MCLK1 and MCLK2
+ - clock-names: Should contains two strings:
+ "mclk1" for the clock supplied on MCLK1, recommended to be a high
+ quality audio reference clock
+ "mclk2" for the clock supplied on MCLK2, recommended to be an always on
+ 32k clock
+
- wlf,gpio-defaults : A list of GPIO configuration register values. Defines
for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If
absent, no configuration of these registers is performed. If any entry has
@@ -59,6 +72,12 @@ Optional properties:
that have not been specified are set to 0 by default. Entries are:
<IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997)
<IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814)
+ - wlf,out-mono : A list of boolean values indicating whether each output is
+ mono or stereo. Position within the list indicates the output affected
+ (eg. First entry in the list corresponds to output 1). A non-zero value
+ indicates a mono output. If present, the number of values should be less
+ than or equal to the number of outputs, if less values are supplied the
+ additional outputs will be treated as stereo.
- wlf,dmic-ref : DMIC reference voltage source for each input, can be
selected from either MICVDD or one of the MICBIAS's, defines
@@ -69,6 +88,7 @@ Optional properties:
- DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
they are being externally supplied. As covered in
Documentation/devicetree/bindings/regulator/regulator.txt
+ (wm5102, wm5110, wm8280, wm8997, wm8998, wm1814)
Also see child specific device properties:
Regulator - ../regulator/arizona-regulator.txt
diff --git a/dts/Bindings/mfd/palmas.txt b/dts/Bindings/mfd/palmas.txt
index eda8989..8ae1a32 100644
--- a/dts/Bindings/mfd/palmas.txt
+++ b/dts/Bindings/mfd/palmas.txt
@@ -24,7 +24,7 @@ and also the generic series names
- #interrupt-cells : should be set to 2 for IRQ number and flags
The first cell is the IRQ number.
The second cell is the flags, encoded as the trigger masks from
- Documentation/devicetree/bindings/interrupts.txt
+ Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- interrupt-parent : The parent interrupt controller.
Optional properties:
diff --git a/dts/Bindings/mfd/s2mpa01.txt b/dts/Bindings/mfd/s2mpa01.txt
deleted file mode 100644
index c13d3d8..0000000
--- a/dts/Bindings/mfd/s2mpa01.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-
-* Samsung S2MPA01 Voltage and Current Regulator
-
-The Samsung S2MPA01 is a multi-function device which includes high
-efficiency buck converters including Dual-Phase buck converter, various LDOs,
-and an RTC. It is interfaced to the host controller using an I2C interface.
-Each sub-block is addressed by the host system using different I2C slave
-addresses.
-
-Required properties:
-- compatible: Should be "samsung,s2mpa01-pmic".
-- reg: Specifies the I2C slave address of the PMIC block. It should be 0x66.
-
-Optional properties:
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the interrupts from s2mpa01 are delivered to.
-- interrupts: An interrupt specifier for the sole interrupt generated by the
- device.
-
-Optional nodes:
-- regulators: The regulators of s2mpa01 that have to be instantiated should be
- included in a sub-node named 'regulators'. Regulator nodes and constraints
- included in this sub-node use the standard regulator bindings which are
- documented elsewhere.
-
-Properties for BUCK regulator nodes:
-- regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
- (default), 25000, or 50000. May be 0 for disabling the ramp delay on
- BUCK{1,2,3,4}.
-
- In the absence of the regulator-ramp-delay property, the default ramp
- delay will be used.
-
- NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
- for a particular group of BUCKs. So provide same regulator-ramp-delay=<value>.
-
- The following BUCKs share ramp settings:
- * 1 and 6
- * 2 and 4
- * 8, 9, and 10
-
-The following are the names of the regulators that the s2mpa01 PMIC block
-supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of s2mpa01.
-
- - LDOn
- - valid values for n are 1 to 26
- - Example: LDO1, LD02, LDO26
- - BUCKn
- - valid values for n are 1 to 10.
- - Example: BUCK1, BUCK2, BUCK9
-
-Example:
-
- s2mpa01_pmic@66 {
- compatible = "samsung,s2mpa01-pmic";
- reg = <0x66>;
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDDQ_MMC2";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-ramp-delay = <50000>;
- };
- };
- };
diff --git a/dts/Bindings/mfd/s2mps11.txt b/dts/Bindings/mfd/s2mps11.txt
deleted file mode 100644
index 09b94c9..0000000
--- a/dts/Bindings/mfd/s2mps11.txt
+++ /dev/null
@@ -1,153 +0,0 @@
-
-* Samsung S2MPS11/13/14/15 and S2MPU02 Voltage and Current Regulator
-
-The Samsung S2MPS11 is a multi-function device which includes voltage and
-current regulators, RTC, charger controller and other sub-blocks. It is
-interfaced to the host controller using an I2C interface. Each sub-block is
-addressed by the host system using different I2C slave addresses.
-
-Required properties:
-- compatible: Should be one of the following
- - "samsung,s2mps11-pmic"
- - "samsung,s2mps13-pmic"
- - "samsung,s2mps14-pmic"
- - "samsung,s2mps15-pmic"
- - "samsung,s2mpu02-pmic".
-- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
-
-Optional properties:
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the interrupts from s2mps11 are delivered to.
-- interrupts: Interrupt specifiers for interrupt sources.
-- samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled
- down. When the system is suspended it will always go down thus triggerring
- unwanted buck warm reset (setting buck voltages to default values).
-- samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
- connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
- register to turn off the power. Usually the ACOKB is pulled up to VBATT so
- when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
-
-Optional nodes:
-- clocks: s2mps11, s2mps13, s2mps15 and s5m8767 provide three(AP/CP/BT) buffered 32.768
- KHz outputs, so to register these as clocks with common clock framework
- instantiate a sub-node named "clocks". It uses the common clock binding
- documented in :
- [Documentation/devicetree/bindings/clock/clock-bindings.txt]
- The s2mps14 provides two (AP/BT) buffered 32.768 KHz outputs.
- - #clock-cells: should be 1.
-
- - The following is the list of clocks generated by the controller. Each clock
- is assigned an identifier and client nodes use this identifier to specify
- the clock which they consume.
- Clock ID Devices
- ----------------------------------------------------------
- 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767
- 32KhzCP 1 S2MPS11, S2MPS13, S2MPS15, S5M8767
- 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S2MPS15, S5M8767
-
- - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
- "samsung,s2mps14-clk", "samsung,s5m8767-clk"
- The s2msp15 uses the same compatible as s2mps13, as both provides similar clocks.
-
-- regulators: The regulators of s2mps11 that have to be instantiated should be
-included in a sub-node named 'regulators'. Regulator nodes included in this
-sub-node should be of the format as listed below.
-
- regulator_name {
- [standard regulator constraints....];
- };
-
- regulator-ramp-delay for BUCKs = [6250/12500/25000(default)/50000] uV/us
-
- BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explicitly
- regulator-ramp-delay = <0> can be used for them to disable ramp delay.
- In the absence of the regulator-ramp-delay property, the default ramp
- delay will be used.
-
-NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
-for a particular group of BUCKs. So provide same regulator-ramp-delay<value>.
-Grouping of BUCKs sharing ramp rate setting is as follow : BUCK[1, 6],
-BUCK[3, 4], and BUCK[7, 8, 10]
-
-On S2MPS14 the LDO10, LDO11 and LDO12 can be configured to external control
-over GPIO. To turn this feature on this property must be added to the regulator
-sub-node:
- - samsung,ext-control-gpios: GPIO specifier for one GPIO
- controlling this regulator (enable/disable);
-Example:
- LDO12 {
- regulator-name = "V_EMMC_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- samsung,ext-control-gpios = <&gpk0 2 0>;
- };
-
-
-The regulator constraints inside the regulator nodes use the standard regulator
-bindings which are documented elsewhere.
-
-The following are the names of the regulators that the s2mps11 pmic block
-supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of s2mps11.
-
- - LDOn
- - valid values for n are:
- - S2MPS11: 1 to 38
- - S2MPS13: 1 to 40
- - S2MPS14: 1 to 25
- - S2MPS15: 1 to 27
- - S2MPU02: 1 to 28
- - Example: LDO1, LDO2, LDO28
- - BUCKn
- - valid values for n are:
- - S2MPS11: 1 to 10
- - S2MPS13: 1 to 10
- - S2MPS14: 1 to 5
- - S2MPS15: 1 to 10
- - S2MPU02: 1 to 7
- - Example: BUCK1, BUCK2, BUCK9
-
-Example:
-
- s2mps11_pmic@66 {
- compatible = "samsung,s2mps11-pmic";
- reg = <0x66>;
-
- s2m_osc: clocks {
- compatible = "samsung,s2mps11-clk";
- #clock-cells = <1>;
- clock-output-names = "xx", "yy", "zz";
- };
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ABB_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDD_ALIVE_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-ramp-delay = <50000>;
- };
- };
- };
diff --git a/dts/Bindings/mfd/samsung,sec-core.txt b/dts/Bindings/mfd/samsung,sec-core.txt
new file mode 100644
index 0000000..cdd079b
--- /dev/null
+++ b/dts/Bindings/mfd/samsung,sec-core.txt
@@ -0,0 +1,88 @@
+Binding for Samsung S2M and S5M family multi-function device
+============================================================
+
+This is a part of device tree bindings for S2M and S5M family multi-function
+devices.
+
+The Samsung S2MPA01, S2MPS11/13/14/15, S2MPU02 and S5M8767 is a family
+of multi-function devices which include voltage and current regulators, RTC,
+charger controller, clock outputs and other sub-blocks. It is interfaced
+to the host controller using an I2C interface. Each sub-block is usually
+addressed by the host system using different I2C slave addresses.
+
+
+This document describes bindings for main device node. Optional sub-blocks
+must be a sub-nodes to it. Bindings for them can be found in:
+ - bindings/regulator/samsung,s2mpa01.txt
+ - bindings/regulator/samsung,s2mps11.txt
+ - bindings/regulator/samsung,s5m8767.txt
+ - bindings/clock/samsung,s2mps11.txt
+
+
+Required properties:
+ - compatible: Should be one of the following
+ - "samsung,s2mpa01-pmic",
+ - "samsung,s2mps11-pmic",
+ - "samsung,s2mps13-pmic",
+ - "samsung,s2mps14-pmic",
+ - "samsung,s2mps15-pmic",
+ - "samsung,s2mpu02-pmic",
+ - "samsung,s5m8767-pmic".
+ - reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
+
+Optional properties:
+ - interrupt-parent: Specifies the phandle of the interrupt controller to which
+ the interrupts from s2mps11 are delivered to.
+ - interrupts: Interrupt specifiers for interrupt sources.
+ - samsung,s2mps11-wrstbi-ground: Indicates that WRSTBI pin of PMIC is pulled
+ down. When the system is suspended it will always go down thus triggerring
+ unwanted buck warm reset (setting buck voltages to default values).
+ - samsung,s2mps11-acokb-ground: Indicates that ACOKB pin of S2MPS11 PMIC is
+ connected to the ground so the PMIC must manually set PWRHOLD bit in CTRL1
+ register to turn off the power. Usually the ACOKB is pulled up to VBATT so
+ when PWRHOLD pin goes low, the rising ACOKB will trigger power off.
+
+Example:
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+
+ s2m_osc: clocks {
+ compatible = "samsung,s2mps11-clk";
+ #clock-cells = <1>;
+ clock-output-names = "xx", "yy", "zz";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ABB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_ALIVE_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <50000>;
+ };
+ };
+ };
diff --git a/dts/Bindings/mfd/syscon.txt b/dts/Bindings/mfd/syscon.txt
index fe8150b..408f768 100644
--- a/dts/Bindings/mfd/syscon.txt
+++ b/dts/Bindings/mfd/syscon.txt
@@ -13,6 +13,10 @@ Required properties:
- compatible: Should contain "syscon".
- reg: the register region can be accessed from syscon
+Optional property:
+- reg-io-width: the size (in bytes) of the IO accesses that should be
+ performed on the device.
+
Examples:
gpr: iomuxc-gpr@020e0000 {
compatible = "fsl,imx6q-iomuxc-gpr", "syscon";
diff --git a/dts/Bindings/mips/pic32/microchip,pic32mzda.txt b/dts/Bindings/mips/pic32/microchip,pic32mzda.txt
new file mode 100644
index 0000000..1c8dbc4
--- /dev/null
+++ b/dts/Bindings/mips/pic32/microchip,pic32mzda.txt
@@ -0,0 +1,31 @@
+* Microchip PIC32MZDA Platforms
+
+PIC32MZDA Starter Kit
+Required root node properties:
+ - compatible = "microchip,pic32mzda-sk", "microchip,pic32mzda"
+
+CPU nodes:
+----------
+A "cpus" node is required. Required properties:
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+A CPU sub-node is also required. Required properties:
+ - device_type: Must be "cpu".
+ - compatible: Must be "mti,mips14KEc".
+Example:
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "mti,mips14KEc";
+ };
+ };
+
+Boot protocol
+--------------
+In accordance with Unified Hosting Interface Reference Manual (MD01069), the
+bootloader must pass the following arguments to the kernel:
+ - $a0: -2.
+ - $a1: KSEG0 address of the flattened device-tree blob.
diff --git a/dts/Bindings/mmc/renesas,mmcif.txt b/dts/Bindings/mmc/renesas,mmcif.txt
index cae29eb..ff611fa 100644
--- a/dts/Bindings/mmc/renesas,mmcif.txt
+++ b/dts/Bindings/mmc/renesas,mmcif.txt
@@ -11,6 +11,7 @@ Required properties:
- "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs
- "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs
- "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs
+ - "renesas,mmcif-r8a7793" for the MMCIF found in r8a7793 SoCs
- "renesas,mmcif-r8a7794" for the MMCIF found in r8a7794 SoCs
- clocks: reference to the functional clock
diff --git a/dts/Bindings/mtd/brcm,brcmnand.txt b/dts/Bindings/mtd/brcm,brcmnand.txt
index 4ff7128..c2546ce 100644
--- a/dts/Bindings/mtd/brcm,brcmnand.txt
+++ b/dts/Bindings/mtd/brcm,brcmnand.txt
@@ -45,6 +45,8 @@ Required properties:
- #size-cells : <0>
Optional properties:
+- clock : reference to the clock for the NAND controller
+- clock-names : "nand" (required for the above clock)
- brcm,nand-has-wp : Some versions of this IP include a write-protect
(WP) control bit. It is always available on >=
v7.0. Use this property to describe the rare
@@ -72,6 +74,12 @@ we define additional 'compatible' properties and associated register resources w
and enable registers
- reg-names: (required) "nand-int-base"
+ * "brcm,nand-bcm6368"
+ - compatible: should contain "brcm,nand-bcm<soc>", "brcm,nand-bcm6368"
+ - reg: (required) the 'NAND_INTR_BASE' register range, with combined status
+ and enable registers, and boot address registers
+ - reg-names: (required) "nand-int-base"
+
* "brcm,nand-iproc"
- reg: (required) the "IDM" register range, for interrupt enable and APB
bus access endianness configuration, and the "EXT" register range,
@@ -148,3 +156,27 @@ nand@f0442800 {
};
};
};
+
+nand@10000200 {
+ compatible = "brcm,nand-bcm63168", "brcm,nand-bcm6368",
+ "brcm,brcmnand-v4.0", "brcm,brcmnand";
+ reg = <0x10000200 0x180>,
+ <0x10000600 0x200>,
+ <0x100000b0 0x10>;
+ reg-names = "nand", "nand-cache", "nand-int-base";
+ interrupt-parent = <&periph_intc>;
+ interrupts = <50>;
+ clocks = <&periph_clk 20>;
+ clock-names = "nand";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand0: nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+ nand-ecc-strength = <1>;
+ nand-ecc-step-size = <512>;
+ };
+};
diff --git a/dts/Bindings/mtd/fsl-quadspi.txt b/dts/Bindings/mtd/fsl-quadspi.txt
index 862aa2f..00c587b 100644
--- a/dts/Bindings/mtd/fsl-quadspi.txt
+++ b/dts/Bindings/mtd/fsl-quadspi.txt
@@ -2,7 +2,8 @@
Required properties:
- compatible : Should be "fsl,vf610-qspi", "fsl,imx6sx-qspi",
- "fsl,imx7d-qspi", "fsl,imx6ul-qspi"
+ "fsl,imx7d-qspi", "fsl,imx6ul-qspi",
+ "fsl,ls1021-qspi"
- reg : the first contains the register location and length,
the second contains the memory mapping address and length
- reg-names: Should contain the reg names "QuadSPI" and "QuadSPI-memory"
diff --git a/dts/Bindings/mtd/ingenic,jz4780-nand.txt b/dts/Bindings/mtd/ingenic,jz4780-nand.txt
new file mode 100644
index 0000000..29ea585
--- /dev/null
+++ b/dts/Bindings/mtd/ingenic,jz4780-nand.txt
@@ -0,0 +1,86 @@
+* Ingenic JZ4780 NAND/BCH
+
+This file documents the device tree bindings for NAND flash devices on the
+JZ4780. NAND devices are connected to the NEMC controller (described in
+memory-controllers/ingenic,jz4780-nemc.txt), and thus NAND device nodes must
+be children of the NEMC node.
+
+Required NAND controller device properties:
+- compatible: Should be set to "ingenic,jz4780-nand".
+- reg: For each bank with a NAND chip attached, should specify a bank number,
+ an offset of 0 and a size of 0x1000000 (i.e. the whole NEMC bank).
+
+Optional NAND controller device properties:
+- ingenic,bch-controller: To make use of the hardware BCH controller, this
+ property must contain a phandle for the BCH controller node. The required
+ properties for this node are described below. If this is not specified,
+ software BCH will be used instead.
+
+Optional children nodes:
+- Individual NAND chips are children of the NAND controller node.
+
+Required children node properties:
+- reg: An integer ranging from 1 to 6 representing the CS line to use.
+
+Optional children node properties:
+- nand-ecc-step-size: ECC block size in bytes.
+- nand-ecc-strength: ECC strength (max number of correctable bits).
+- nand-ecc-mode: String, operation mode of the NAND ecc mode. "hw" by default
+- nand-on-flash-bbt: boolean to enable on flash bbt option, if not present false
+- rb-gpios: GPIO specifier for the busy pin.
+- wp-gpios: GPIO specifier for the write protect pin.
+
+Optional child node of NAND chip nodes:
+- partitions: see Documentation/devicetree/bindings/mtd/partition.txt
+
+Example:
+
+nemc: nemc@13410000 {
+ ...
+
+ nandc: nand-controller@1 {
+ compatible = "ingenic,jz4780-nand";
+ reg = <1 0 0x1000000>; /* Bank 1 */
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ingenic,bch-controller = <&bch>;
+
+ nand@1 {
+ reg = <1>;
+
+ nand-ecc-step-size = <1024>;
+ nand-ecc-strength = <24>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+
+ rb-gpios = <&gpa 20 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpf 22 GPIO_ACTIVE_LOW>;
+
+ partitions {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ...
+ }
+ };
+ };
+};
+
+The BCH controller is a separate SoC component used for error correction on
+NAND devices. The following is a description of the device properties for a
+BCH controller.
+
+Required BCH properties:
+- compatible: Should be set to "ingenic,jz4780-bch".
+- reg: Should specify the BCH controller registers location and length.
+- clocks: Clock for the BCH controller.
+
+Example:
+
+bch: bch@134d0000 {
+ compatible = "ingenic,jz4780-bch";
+ reg = <0x134d0000 0x10000>;
+
+ clocks = <&cgu JZ4780_CLK_BCH>;
+};
diff --git a/dts/Bindings/mtd/jedec,spi-nor.txt b/dts/Bindings/mtd/jedec,spi-nor.txt
index 2bee681..2c91c03 100644
--- a/dts/Bindings/mtd/jedec,spi-nor.txt
+++ b/dts/Bindings/mtd/jedec,spi-nor.txt
@@ -1,15 +1,61 @@
-* MTD SPI driver for ST M25Pxx (and similar) serial flash chips
+* SPI NOR flash: ST M25Pxx (and similar) serial flash chips
Required properties:
- #address-cells, #size-cells : Must be present if the device has sub-nodes
representing partitions.
- compatible : May include a device-specific string consisting of the
- manufacturer and name of the chip. Bear in mind the DT binding
- is not Linux-only, but in case of Linux, see the "m25p_ids"
- table in drivers/mtd/devices/m25p80.c for the list of supported
- chips.
+ manufacturer and name of the chip. A list of supported chip
+ names follows.
Must also include "jedec,spi-nor" for any SPI NOR flash that can
be identified by the JEDEC READ ID opcode (0x9F).
+
+ Supported chip names:
+ at25df321a
+ at25df641
+ at26df081a
+ mr25h256
+ mx25l4005a
+ mx25l1606e
+ mx25l6405d
+ mx25l12805d
+ mx25l25635e
+ n25q064
+ n25q128a11
+ n25q128a13
+ n25q512a
+ s25fl256s1
+ s25fl512s
+ s25sl12801
+ s25fl008k
+ s25fl064k
+ sst25vf040b
+ m25p40
+ m25p80
+ m25p16
+ m25p32
+ m25p64
+ m25p128
+ w25x80
+ w25x32
+ w25q32
+ w25q32dw
+ w25q80bl
+ w25q128
+ w25q256
+
+ The following chip names have been used historically to
+ designate quirky versions of flash chips that do not support the
+ JEDEC READ ID opcode (0x9F):
+ m25p05-nonjedec
+ m25p10-nonjedec
+ m25p20-nonjedec
+ m25p40-nonjedec
+ m25p80-nonjedec
+ m25p16-nonjedec
+ m25p32-nonjedec
+ m25p64-nonjedec
+ m25p128-nonjedec
+
- reg : Chip-Select number
- spi-max-frequency : Maximum frequency of the SPI bus the chip can operate at
diff --git a/dts/Bindings/mtd/mtk-quadspi.txt b/dts/Bindings/mtd/mtk-quadspi.txt
new file mode 100644
index 0000000..fb314f0
--- /dev/null
+++ b/dts/Bindings/mtd/mtk-quadspi.txt
@@ -0,0 +1,41 @@
+* Serial NOR flash controller for MTK MT81xx (and similar)
+
+Required properties:
+- compatible: should be "mediatek,mt8173-nor";
+- reg: physical base address and length of the controller's register
+- clocks: the phandle of the clocks needed by the nor controller
+- clock-names: the names of the clocks
+ the clocks should be named "spi" and "sf". "spi" is used for spi bus,
+ and "sf" is used for controller, these are the clocks witch
+ hardware needs to enabling nor flash and nor flash controller.
+ See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- #address-cells: should be <1>
+- #size-cells: should be <0>
+
+The SPI flash must be a child of the nor_flash node and must have a
+compatible property. Also see jedec,spi-nor.txt.
+
+Required properties:
+- compatible: May include a device-specific string consisting of the manufacturer
+ and name of the chip. Must also include "jedec,spi-nor" for any
+ SPI NOR flash that can be identified by the JEDEC READ ID opcode (0x9F).
+- reg : Chip-Select number
+
+Example:
+
+nor_flash: spi@1100d000 {
+ compatible = "mediatek,mt8173-nor";
+ reg = <0 0x1100d000 0 0xe0>;
+ clocks = <&pericfg CLK_PERI_SPI>,
+ <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
+ clock-names = "spi", "sf";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ };
+};
+
diff --git a/dts/Bindings/mtd/partition.txt b/dts/Bindings/mtd/partition.txt
index 1c63e40..81a224d 100644
--- a/dts/Bindings/mtd/partition.txt
+++ b/dts/Bindings/mtd/partition.txt
@@ -32,6 +32,8 @@ Optional properties:
partition should only be mounted read-only. This is usually used for flash
partitions containing early-boot firmware images or data which should not be
clobbered.
+- lock : Do not unlock the partition at initialization time (not supported on
+ all devices)
Examples:
diff --git a/dts/Bindings/net/cdns-emac.txt b/dts/Bindings/net/cdns-emac.txt
deleted file mode 100644
index 4451ee9..0000000
--- a/dts/Bindings/net/cdns-emac.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-* Cadence EMAC Ethernet controller
-
-Required properties:
-- compatible: Should be "cdns,[<chip>-]{emac}"
- Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
- Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
- Or the generic form: "cdns,emac".
-- reg: Address and length of the register set for the device
-- interrupts: Should contain macb interrupt
-- phy-mode: see ethernet.txt file in the same directory.
-
-Examples:
-
- macb0: ethernet@fffc4000 {
- compatible = "cdns,at91rm9200-emac";
- reg = <0xfffc4000 0x4000>;
- interrupts = <21>;
- phy-mode = "rmii";
- local-mac-address = [3a 0e 03 04 05 06];
- };
diff --git a/dts/Bindings/net/dsa/dsa.txt b/dts/Bindings/net/dsa/dsa.txt
index 04e6bef..5fdbbcd 100644
--- a/dts/Bindings/net/dsa/dsa.txt
+++ b/dts/Bindings/net/dsa/dsa.txt
@@ -31,6 +31,8 @@ A switch child node has the following optional property:
switch. Must be set if the switch can not detect
the presence and/or size of a connected EEPROM,
otherwise optional.
+- reset-gpios : phandle and specifier to a gpio line connected to
+ reset pin of the switch chip.
A switch may have multiple "port" children nodes
@@ -114,6 +116,7 @@ Example:
#size-cells = <0>;
reg = <17 1>; /* MDIO address 17, switch 1 in tree */
mii-bus = <&mii_bus1>;
+ reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
switch1port0: port@0 {
reg = <0>;
diff --git a/dts/Bindings/net/hisilicon-hns-mdio.txt b/dts/Bindings/net/hisilicon-hns-mdio.txt
index 9c23fdf..4a7ede9 100644
--- a/dts/Bindings/net/hisilicon-hns-mdio.txt
+++ b/dts/Bindings/net/hisilicon-hns-mdio.txt
@@ -1,7 +1,12 @@
Hisilicon MDIO bus controller
Properties:
-- compatible: "hisilicon,mdio","hisilicon,hns-mdio".
+- compatible: can be one of:
+ "hisilicon,hns-mdio"
+ "hisilicon,mdio"
+ "hisilicon,hns-mdio" is recommended to be used for hip05 and later SOCs,
+ while "hisilicon,mdio" is optional for backwards compatibility only on
+ hip04 Soc.
- reg: The base address of the MDIO bus controller register bank.
- #address-cells: Must be <1>.
- #size-cells: Must be <0>. MDIO addresses have no size component.
diff --git a/dts/Bindings/net/ieee802154/adf7242.txt b/dts/Bindings/net/ieee802154/adf7242.txt
new file mode 100644
index 0000000..dea5124
--- /dev/null
+++ b/dts/Bindings/net/ieee802154/adf7242.txt
@@ -0,0 +1,18 @@
+* ADF7242 IEEE 802.15.4 *
+
+Required properties:
+ - compatible: should be "adi,adf7242"
+ - spi-max-frequency: maximal bus speed (12.5 MHz)
+ - reg: the chipselect index
+ - interrupts: the interrupt generated by the device via pin IRQ1.
+ IRQ_TYPE_LEVEL_HIGH (4) or IRQ_TYPE_EDGE_FALLING (1)
+
+Example:
+
+ adf7242@0 {
+ compatible = "adi,adf7242";
+ spi-max-frequency = <10000000>;
+ reg = <0>;
+ interrupts = <98 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gpio3>;
+ };
diff --git a/dts/Bindings/net/macb.txt b/dts/Bindings/net/macb.txt
index b5d7976..d2e243b 100644
--- a/dts/Bindings/net/macb.txt
+++ b/dts/Bindings/net/macb.txt
@@ -2,15 +2,19 @@
Required properties:
- compatible: Should be "cdns,[<chip>-]{macb|gem}"
+ Use "cdns,at91rm9200-emac" Atmel at91rm9200 SoC.
Use "cdns,at91sam9260-macb" for Atmel at91sam9 SoCs or the 10/100Mbit IP
available on sama5d3 SoCs.
+ Use "cdns,np4-macb" for NP4 SoC devices.
Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
Use "cdns,pc302-gem" for Picochip picoXcell pc302 and later devices based on
the Cadence GEM, or the generic form: "cdns,gem".
Use "atmel,sama5d2-gem" for the GEM IP (10/100) available on Atmel sama5d2 SoCs.
Use "atmel,sama5d3-gem" for the Gigabit IP available on Atmel sama5d3 SoCs.
Use "atmel,sama5d4-gem" for the GEM IP (10/100) available on Atmel sama5d4 SoCs.
+ Use "cdns,zynq-gem" Xilinx Zynq-7xxx SoC.
Use "cdns,zynqmp-gem" for Zynq Ultrascale+ MPSoC.
+ Or the generic form: "cdns,emac".
- reg: Address and length of the register set for the device
- interrupts: Should contain macb interrupt
- phy-mode: See ethernet.txt file in the same directory.
@@ -19,6 +23,9 @@ Required properties:
Optional elements: 'tx_clk'
- clocks: Phandles to input clocks.
+Optional properties for PHY child node:
+- reset-gpios : Should specify the gpio for phy reset
+
Examples:
macb0: ethernet@fffc4000 {
@@ -29,4 +36,8 @@ Examples:
local-mac-address = [3a 0e 03 04 05 06];
clock-names = "pclk", "hclk", "tx_clk";
clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
+ ethernet-phy@1 {
+ reg = <0x1>;
+ reset-gpios = <&pioE 6 1>;
+ };
};
diff --git a/dts/Bindings/net/mediatek,mt7620-gsw.txt b/dts/Bindings/net/mediatek,mt7620-gsw.txt
new file mode 100644
index 0000000..aa63130
--- /dev/null
+++ b/dts/Bindings/net/mediatek,mt7620-gsw.txt
@@ -0,0 +1,26 @@
+Mediatek Gigabit Switch
+=======================
+
+The mediatek gigabit switch can be found on Mediatek SoCs (mt7620, mt7621).
+
+Required properties:
+- compatible: Should be "mediatek,mt7620-gsw" or "mediatek,mt7621-gsw"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the gigabit switches interrupt
+- resets: Should contain the gigabit switches resets
+- reset-names: Should contain the reset names "gsw"
+
+Example:
+
+gsw@10110000 {
+ compatible = "ralink,mt7620-gsw";
+ reg = <0x10110000 8000>;
+
+ resets = <&rstctrl 23>;
+ reset-names = "gsw";
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+};
diff --git a/dts/Bindings/net/micrel-ksz90x1.txt b/dts/Bindings/net/micrel-ksz90x1.txt
index 692076f..f9c32ad 100644
--- a/dts/Bindings/net/micrel-ksz90x1.txt
+++ b/dts/Bindings/net/micrel-ksz90x1.txt
@@ -1,8 +1,9 @@
Micrel KSZ9021/KSZ9031 Gigabit Ethernet PHY
-Some boards require special tuning values, particularly when it comes to
-clock delays. You can specify clock delay values by adding
-micrel-specific properties to an Ethernet OF device node.
+Some boards require special tuning values, particularly when it comes
+to clock delays. You can specify clock delay values in the PHY OF
+device node. Deprecated, but still supported, these properties can
+also be added to an Ethernet OF device node.
Note that these settings are applied after any phy-specific fixup from
phy_fixup_list (see phy_init_hw() from drivers/net/phy/phy_device.c),
@@ -57,16 +58,6 @@ KSZ9031:
Examples:
- /* Attach to an Ethernet device with autodetected PHY */
- &enet {
- rxc-skew-ps = <3000>;
- rxdv-skew-ps = <0>;
- txc-skew-ps = <3000>;
- txen-skew-ps = <0>;
- status = "okay";
- };
-
- /* Attach to an explicitly-specified PHY */
mdio {
phy0: ethernet-phy@0 {
rxc-skew-ps = <3000>;
diff --git a/dts/Bindings/net/nfc/st95hf.txt b/dts/Bindings/net/nfc/st95hf.txt
new file mode 100644
index 0000000..ea3178b
--- /dev/null
+++ b/dts/Bindings/net/nfc/st95hf.txt
@@ -0,0 +1,50 @@
+* STMicroelectronics : NFC Transceiver ST95HF
+
+ST NFC Transceiver is required to attach with SPI bus.
+ST95HF node should be defined in DT as SPI slave device of SPI
+master with which ST95HF transceiver is physically connected.
+The properties defined below are required to be the part of DT
+to include ST95HF transceiver into the platform.
+
+Required properties:
+===================
+- reg: Address of SPI slave "ST95HF transceiver" on SPI master bus.
+
+- compatible: should be "st,st95hf" for ST95HF NFC transceiver
+
+- spi-max-frequency: Max. operating SPI frequency for ST95HF
+ transceiver.
+
+- enable-gpio: GPIO line to enable ST95HF transceiver.
+
+- interrupt-parent : Standard way to specify the controller to which
+ ST95HF transceiver's interrupt is routed.
+
+- interrupts : Standard way to define ST95HF transceiver's out
+ interrupt.
+
+Optional property:
+=================
+- st95hfvin-supply : This is an optional property. It contains a
+ phandle to ST95HF transceiver's regulator supply node in DT.
+
+Example:
+=======
+spi@9840000 {
+ reg = <0x9840000 0x110>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <&pio0 4>;
+ status = "okay";
+
+ st95hf@0{
+ reg = <0>;
+ compatible = "st,st95hf";
+ status = "okay";
+ spi-max-frequency = <1000000>;
+ enable-gpio = <&pio4 0>;
+ interrupt-parent = <&pio0>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ };
+
+};
diff --git a/dts/Bindings/net/ralink,rt2880-net.txt b/dts/Bindings/net/ralink,rt2880-net.txt
new file mode 100644
index 0000000..88b095d
--- /dev/null
+++ b/dts/Bindings/net/ralink,rt2880-net.txt
@@ -0,0 +1,61 @@
+Ralink Frame Engine Ethernet controller
+=======================================
+
+The Ralink frame engine ethernet controller can be found on Ralink and
+Mediatek SoCs (RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8).
+
+Depending on the SoC, there is a number of ports connected to the CPU port
+directly and/or via a (gigabit-)switch.
+
+* Ethernet controller node
+
+Required properties:
+- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth",
+ "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth",
+ "mediatek,mt7620-eth", "mediatek,mt7621-eth"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the frame engines interrupt
+- resets: Should contain the frame engines resets
+- reset-names: Should contain the reset names "fe". If a switch is present
+ "esw" is also required.
+
+
+* Ethernet port node
+
+Required properties:
+- compatible: Should be "ralink,eth-port"
+- reg: The number of the physical port
+- phy-handle: reference to the node describing the phy
+
+Example:
+
+mdio-bus {
+ ...
+ phy0: ethernet-phy@0 {
+ phy-mode = "mii";
+ reg = <0>;
+ };
+};
+
+ethernet@400000 {
+ compatible = "ralink,rt2880-eth";
+ reg = <0x00400000 10000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ resets = <&rstctrl 18>;
+ reset-names = "fe";
+
+ interrupt-parent = <&cpuintc>;
+ interrupts = <5>;
+
+ port@0 {
+ compatible = "ralink,eth-port";
+ reg = <0>;
+ phy-handle = <&phy0>;
+ };
+
+};
diff --git a/dts/Bindings/net/ralink,rt3050-esw.txt b/dts/Bindings/net/ralink,rt3050-esw.txt
new file mode 100644
index 0000000..2e79bd3
--- /dev/null
+++ b/dts/Bindings/net/ralink,rt3050-esw.txt
@@ -0,0 +1,32 @@
+Ralink Fast Ethernet Embedded Switch
+====================================
+
+The ralink fast ethernet embedded switch can be found on Ralink and Mediatek
+SoCs (RT3x5x, RT5350, MT76x8).
+
+Required properties:
+- compatible: Should be "ralink,rt3050-esw"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+ that services interrupts for this device
+- interrupts: Should contain the embedded switches interrupt
+- resets: Should contain the embedded switches resets
+- reset-names: Should contain the reset names "esw"
+
+Optional properties:
+- ralink,portmap: can be used to choose if the default switch setup is
+ llllw or wllll
+- ralink,led_polarity: override the active high/low settings of the leds
+
+Example:
+
+esw@10110000 {
+ compatible = "ralink,rt3050-esw";
+ reg = <0x10110000 8000>;
+
+ resets = <&rstctrl 23>;
+ reset-names = "esw";
+
+ interrupt-parent = <&intc>;
+ interrupts = <17>;
+};
diff --git a/dts/Bindings/net/renesas,ravb.txt b/dts/Bindings/net/renesas,ravb.txt
index b486f3f..81a9f9e 100644
--- a/dts/Bindings/net/renesas,ravb.txt
+++ b/dts/Bindings/net/renesas,ravb.txt
@@ -5,8 +5,18 @@ interface contains.
Required properties:
- compatible: "renesas,etheravb-r8a7790" if the device is a part of R8A7790 SoC.
+ "renesas,etheravb-r8a7791" if the device is a part of R8A7791 SoC.
+ "renesas,etheravb-r8a7792" if the device is a part of R8A7792 SoC.
+ "renesas,etheravb-r8a7793" if the device is a part of R8A7793 SoC.
"renesas,etheravb-r8a7794" if the device is a part of R8A7794 SoC.
"renesas,etheravb-r8a7795" if the device is a part of R8A7795 SoC.
+ "renesas,etheravb-rcar-gen2" for generic R-Car Gen 2 compatible interface.
+ "renesas,etheravb-rcar-gen3" for generic R-Car Gen 3 compatible interface.
+
+ When compatible with the generic version, nodes must list the
+ SoC-specific version corresponding to the platform first
+ followed by the generic version.
+
- reg: offset and length of (1) the register block and (2) the stream buffer.
- interrupts: A list of interrupt-specifiers, one for each entry in
interrupt-names.
@@ -37,7 +47,7 @@ Optional properties:
Example:
ethernet@e6800000 {
- compatible = "renesas,etheravb-r8a7795";
+ compatible = "renesas,etheravb-r8a7795", "renesas,etheravb-rcar-gen3";
reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/dts/Bindings/net/socfpga-dwmac.txt b/dts/Bindings/net/socfpga-dwmac.txt
index 3a9d679..72d82d6 100644
--- a/dts/Bindings/net/socfpga-dwmac.txt
+++ b/dts/Bindings/net/socfpga-dwmac.txt
@@ -11,6 +11,8 @@ Required properties:
designware version numbers documented in stmmac.txt
- altr,sysmgr-syscon : Should be the phandle to the system manager node that
encompasses the glue register, the register offset, and the register shift.
+ - altr,f2h_ptp_ref_clk use f2h_ptp_ref_clk instead of default eosc1 clock
+ for ptp ref clk. This affects all emacs as the clock is common.
Optional properties:
altr,emac-splitter: Should be the phandle to the emac splitter soft IP node if
diff --git a/dts/Bindings/net/stmmac.txt b/dts/Bindings/net/stmmac.txt
index f34fc3c..e862a92 100644
--- a/dts/Bindings/net/stmmac.txt
+++ b/dts/Bindings/net/stmmac.txt
@@ -35,18 +35,18 @@ Optional properties:
- reset-names: Should contain the reset signal name "stmmaceth", if a
reset phandle is given
- max-frame-size: See ethernet.txt file in the same directory
-- clocks: If present, the first clock should be the GMAC main clock and
- the second clock should be peripheral's register interface clock. Further
- clocks may be specified in derived bindings.
-- clock-names: One name for each entry in the clocks property, the
- first one should be "stmmaceth" and the second one should be "pclk".
-- clk_ptp_ref: this is the PTP reference clock; in case of the PTP is
- available this clock is used for programming the Timestamp Addend Register.
- If not passed then the system clock will be used and this is fine on some
- platforms.
+- clocks: If present, the first clock should be the GMAC main clock
+ The optional second clock should be peripheral's register interface clock.
+ The third optional clock should be the ptp reference clock.
+ Further clocks may be specified in derived bindings.
+- clock-names: One name for each entry in the clocks property.
+ The first one should be "stmmaceth".
+ The optional second one should be "pclk".
+ The optional third one should be "clk_ptp_ref".
- snps,burst_len: The AXI burst lenth value of the AXI BUS MODE register.
- tx-fifo-depth: See ethernet.txt file in the same directory
- rx-fifo-depth: See ethernet.txt file in the same directory
+- mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus.
Examples:
@@ -65,4 +65,11 @@ Examples:
tx-fifo-depth = <16384>;
clocks = <&clock>;
clock-names = "stmmaceth";
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy1: ethernet-phy@0 {
+ };
+ };
};
diff --git a/dts/Bindings/opp/opp.txt b/dts/Bindings/opp/opp.txt
index 0cb44dc..601256f 100644
--- a/dts/Bindings/opp/opp.txt
+++ b/dts/Bindings/opp/opp.txt
@@ -45,21 +45,10 @@ Devices supporting OPPs must set their "operating-points-v2" property with
phandle to a OPP table in their DT node. The OPP core will use this phandle to
find the operating points for the device.
-Devices may want to choose OPP tables at runtime and so can provide a list of
-phandles here. But only *one* of them should be chosen at runtime. This must be
-accompanied by a corresponding "operating-points-names" property, to uniquely
-identify the OPP tables.
-
If required, this can be extended for SoC vendor specfic bindings. Such bindings
should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
and should have a compatible description like: "operating-points-v2-<vendor>".
-Optional properties:
-- operating-points-names: Names of OPP tables (required if multiple OPP
- tables are present), to uniquely identify them. The same list must be present
- for all the CPUs which are sharing clock/voltage rails and hence the OPP
- tables.
-
* OPP Table Node
This describes the OPPs belonging to a device. This node can have following
@@ -100,6 +89,14 @@ Optional properties:
Entries for multiple regulators must be present in the same order as
regulators are specified in device's DT node.
+- opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to
+ the above opp-microvolt property, but allows multiple voltage ranges to be
+ provided for the same OPP. At runtime, the platform can pick a <name> and
+ matching opp-microvolt-<name> property will be enabled for all OPPs. If the
+ platform doesn't pick a specific <name> or the <name> doesn't match with any
+ opp-microvolt-<name> properties, then opp-microvolt property shall be used, if
+ present.
+
- opp-microamp: The maximum current drawn by the device in microamperes
considering system specific parameters (such as transients, process, aging,
maximum operating temperature range etc.) as necessary. This may be used to
@@ -112,6 +109,9 @@ Optional properties:
for few regulators, then this should be marked as zero for them. If it isn't
required for any regulator, then this property need not be present.
+- opp-microamp-<name>: Named opp-microamp property. Similar to
+ opp-microvolt-<name> property, but for microamp instead.
+
- clock-latency-ns: Specifies the maximum possible transition latency (in
nanoseconds) for switching to this OPP from any other OPP.
@@ -123,6 +123,26 @@ Optional properties:
- opp-suspend: Marks the OPP to be used during device suspend. Only one OPP in
the table should have this.
+- opp-supported-hw: This enables us to select only a subset of OPPs from the
+ larger OPP table, based on what version of the hardware we are running on. We
+ still can't have multiple nodes with the same opp-hz value in OPP table.
+
+ It's an user defined array containing a hierarchy of hardware version numbers,
+ supported by the OPP. For example: a platform with hierarchy of three levels
+ of versions (A, B and C), this field should be like <X Y Z>, where X
+ corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z
+ corresponds to version hierarchy C.
+
+ Each level of hierarchy is represented by a 32 bit value, and so there can be
+ only 32 different supported version per hierarchy. i.e. 1 bit per version. A
+ value of 0xFFFFFFFF will enable the OPP for all versions for that hierarchy
+ level. And a value of 0x00000000 will disable the OPP completely, and so we
+ never want that to happen.
+
+ If 32 values aren't sufficient for a version hierarchy, than that version
+ hierarchy can be contained in multiple 32 bit values. i.e. <X Y Z1 Z2> in the
+ above example, Z1 & Z2 refer to the version hierarchy Z.
+
- status: Marks the node enabled/disabled.
Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
@@ -157,20 +177,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
compatible = "operating-points-v2";
opp-shared;
- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
- opp01 {
+ opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
- opp02 {
+ opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
clock-latency-ns = <290000>;
@@ -236,20 +256,20 @@ independently.
* independently.
*/
- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
- opp01 {
+ opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
- opp02 {
+ opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
opp-microamp = <90000;
@@ -312,20 +332,20 @@ DVFS state together.
compatible = "operating-points-v2";
opp-shared;
- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>;
opp-microamp = <70000>;
clock-latency-ns = <300000>;
opp-suspend;
};
- opp01 {
+ opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <980000 1000000 1010000>;
opp-microamp = <80000>;
clock-latency-ns = <310000>;
};
- opp02 {
+ opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1025000>;
opp-microamp = <90000>;
@@ -338,20 +358,20 @@ DVFS state together.
compatible = "operating-points-v2";
opp-shared;
- opp10 {
+ opp@1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1045000 1050000 1055000>;
opp-microamp = <95000>;
clock-latency-ns = <400000>;
opp-suspend;
};
- opp11 {
+ opp@1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1075000>;
opp-microamp = <100000>;
clock-latency-ns = <400000>;
};
- opp12 {
+ opp@1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1010000 1100000 1110000>;
opp-microamp = <95000>;
@@ -378,7 +398,7 @@ Example 4: Handling multiple regulators
compatible = "operating-points-v2";
opp-shared;
- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000>, /* Supply 0 */
<960000>, /* Supply 1 */
@@ -391,7 +411,7 @@ Example 4: Handling multiple regulators
/* OR */
- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>, /* Supply 0 */
<960000 965000 975000>, /* Supply 1 */
@@ -404,7 +424,7 @@ Example 4: Handling multiple regulators
/* OR */
- opp00 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <970000 975000 985000>, /* Supply 0 */
<960000 965000 975000>, /* Supply 1 */
@@ -417,7 +437,8 @@ Example 4: Handling multiple regulators
};
};
-Example 5: Multiple OPP tables
+Example 5: opp-supported-hw
+(example: three level hierarchy of versions: cuts, substrate and process)
/ {
cpus {
@@ -426,40 +447,73 @@ Example 5: Multiple OPP tables
...
cpu-supply = <&cpu_supply>
- operating-points-v2 = <&cpu0_opp_table_slow>, <&cpu0_opp_table_fast>;
- operating-points-names = "slow", "fast";
+ operating-points-v2 = <&cpu0_opp_table_slow>;
};
};
- cpu0_opp_table_slow: opp_table_slow {
+ opp_table {
compatible = "operating-points-v2";
status = "okay";
opp-shared;
- opp00 {
+ opp@600000000 {
+ /*
+ * Supports all substrate and process versions for 0xF
+ * cuts, i.e. only first four cuts.
+ */
+ opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>
opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <900000 915000 925000>;
...
};
- opp01 {
+ opp@800000000 {
+ /*
+ * Supports:
+ * - cuts: only one, 6th cut (represented by 6th bit).
+ * - substrate: supports 16 different substrate versions
+ * - process: supports 9 different process versions
+ */
+ opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>
opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <900000 915000 925000>;
...
};
};
+};
+
+Example 6: opp-microvolt-<name>, opp-microamp-<name>:
+(example: device with two possible microvolt ranges: slow and fast)
- cpu0_opp_table_fast: opp_table_fast {
+/ {
+ cpus {
+ cpu@0 {
+ compatible = "arm,cortex-a7";
+ ...
+
+ operating-points-v2 = <&cpu0_opp_table>;
+ };
+ };
+
+ cpu0_opp_table: opp_table0 {
compatible = "operating-points-v2";
- status = "okay";
opp-shared;
- opp10 {
+ opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
- ...
+ opp-microvolt-slow = <900000 915000 925000>;
+ opp-microvolt-fast = <970000 975000 985000>;
+ opp-microamp-slow = <70000>;
+ opp-microamp-fast = <71000>;
};
- opp11 {
- opp-hz = /bits/ 64 <1100000000>;
- ...
+ opp@1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt-slow = <900000 915000 925000>, /* Supply vcc0 */
+ <910000 925000 935000>; /* Supply vcc1 */
+ opp-microvolt-fast = <970000 975000 985000>, /* Supply vcc0 */
+ <960000 965000 975000>; /* Supply vcc1 */
+ opp-microamp = <70000>; /* Will be used for both slow/fast */
};
};
};
diff --git a/dts/Bindings/pci/brcm,iproc-pcie.txt b/dts/Bindings/pci/brcm,iproc-pcie.txt
index 45c2a80..01b88f4 100644
--- a/dts/Bindings/pci/brcm,iproc-pcie.txt
+++ b/dts/Bindings/pci/brcm,iproc-pcie.txt
@@ -1,7 +1,10 @@
* Broadcom iProc PCIe controller with the platform bus interface
Required properties:
-- compatible: Must be "brcm,iproc-pcie"
+- compatible: Must be "brcm,iproc-pcie" for PAXB, or "brcm,iproc-pcie-paxc"
+ for PAXC. PAXB-based root complex is used for external endpoint devices.
+ PAXC-based root complex is connected to emulated endpoint devices
+ internal to the ASIC
- reg: base address and length of the PCIe controller I/O register space
- #interrupt-cells: set to <1>
- interrupt-map-mask and interrupt-map, standard PCI properties to define the
@@ -32,6 +35,28 @@ Optional:
- brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to
increase the outbound window size
+MSI support (optional):
+
+For older platforms without MSI integrated in the GIC, iProc PCIe core provides
+an event queue based MSI support. The iProc MSI uses host memories to store
+MSI posted writes in the event queues
+
+- msi-parent: Link to the device node of the MSI controller. On newer iProc
+platforms, the MSI controller may be gicv2m or gicv3-its. On older iProc
+platforms without MSI support in its interrupt controller, one may use the
+event queue based MSI support integrated within the iProc PCIe core.
+
+When the iProc event queue based MSI is used, one needs to define the
+following properties in the MSI device node:
+- compatible: Must be "brcm,iproc-msi"
+- msi-controller: claims itself as an MSI controller
+- interrupt-parent: Link to its parent interrupt device
+- interrupts: List of interrupt IDs from its parent interrupt device
+
+Optional properties:
+- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
+require the interrupt enable registers to be set explicitly to enable MSI
+
Example:
pcie0: pcie@18012000 {
compatible = "brcm,iproc-pcie";
@@ -58,6 +83,19 @@ Example:
brcm,pcie-ob-oarr-size;
brcm,pcie-ob-axi-offset = <0x00000000>;
brcm,pcie-ob-window-size = <256>;
+
+ msi-parent = <&msi0>;
+
+ /* iProc event queue based MSI */
+ msi0: msi@18012000 {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
+ <GIC_SPI 97 IRQ_TYPE_NONE>,
+ <GIC_SPI 98 IRQ_TYPE_NONE>,
+ <GIC_SPI 99 IRQ_TYPE_NONE>,
+ };
};
pcie1: pcie@18013000 {
diff --git a/dts/Bindings/pci/hisilicon-pcie.txt b/dts/Bindings/pci/hisilicon-pcie.txt
index 17c6ed9..b721bea 100644
--- a/dts/Bindings/pci/hisilicon-pcie.txt
+++ b/dts/Bindings/pci/hisilicon-pcie.txt
@@ -1,4 +1,4 @@
-HiSilicon PCIe host bridge DT description
+HiSilicon Hip05 and Hip06 PCIe host bridge DT description
HiSilicon PCIe host controller is based on Designware PCI core.
It shares common functions with PCIe Designware core driver and inherits
@@ -7,8 +7,8 @@ Documentation/devicetree/bindings/pci/designware-pci.txt.
Additional properties are described here:
-Required properties:
-- compatible: Should contain "hisilicon,hip05-pcie".
+Required properties
+- compatible: Should contain "hisilicon,hip05-pcie" or "hisilicon,hip06-pcie".
- reg: Should contain rc_dbi, config registers location and length.
- reg-names: Must include the following entries:
"rc_dbi": controller configuration registers;
@@ -20,7 +20,7 @@ Optional properties:
- status: Either "ok" or "disabled".
- dma-coherent: Present if DMA operations are coherent.
-Example:
+Hip05 Example (note that Hip06 is the same except compatible):
pcie@0xb0080000 {
compatible = "hisilicon,hip05-pcie", "snps,dw-pcie";
reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>;
diff --git a/dts/Bindings/pci/pci-rcar-gen2.txt b/dts/Bindings/pci/pci-rcar-gen2.txt
index 7fab84b..4e8b90e 100644
--- a/dts/Bindings/pci/pci-rcar-gen2.txt
+++ b/dts/Bindings/pci/pci-rcar-gen2.txt
@@ -8,7 +8,14 @@ OHCI and EHCI controllers.
Required properties:
- compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
"renesas,pci-r8a7791" for the R8A7791 SoC;
- "renesas,pci-r8a7794" for the R8A7794 SoC.
+ "renesas,pci-r8a7794" for the R8A7794 SoC;
+ "renesas,pci-rcar-gen2" for a generic R-Car Gen2 compatible device
+
+
+ When compatible with the generic version, nodes must list the
+ SoC-specific version corresponding to the platform first
+ followed by the generic version.
+
- reg: A list of physical regions to access the device: the first is
the operational registers for the OHCI/EHCI controllers and the
second is for the bridge configuration and control registers.
@@ -24,10 +31,15 @@ Required properties:
- interrupt-map-mask: standard property that helps to define the interrupt
mapping.
+Optional properties:
+- dma-ranges: a single range for the inbound memory region. If not supplied,
+ defaults to 1GiB at 0x40000000. Note there are hardware restrictions on the
+ allowed combinations of address and size.
+
Example SoC configuration:
pci0: pci@ee090000 {
- compatible = "renesas,pci-r8a7790";
+ compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
reg = <0x0 0xee090000 0x0 0xc00>,
<0x0 0xee080000 0x0 0x1100>;
@@ -38,6 +50,7 @@ Example SoC configuration:
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
interrupt-map-mask = <0xff00 0 0 0x7>;
interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
diff --git a/dts/Bindings/pci/qcom,pcie.txt b/dts/Bindings/pci/qcom,pcie.txt
new file mode 100644
index 0000000..4059a6f
--- /dev/null
+++ b/dts/Bindings/pci/qcom,pcie.txt
@@ -0,0 +1,233 @@
+* Qualcomm PCI express root complex
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Value should contain
+ - "qcom,pcie-ipq8064" for ipq8064
+ - "qcom,pcie-apq8064" for apq8064
+ - "qcom,pcie-apq8084" for apq8084
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Register ranges as listed in the reg-names property
+
+- reg-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Must include the following entries
+ - "parf" Qualcomm specific registers
+ - "dbi" Designware PCIe registers
+ - "elbi" External local bus interface registers
+ - "config" PCIe configuration space
+
+- device_type:
+ Usage: required
+ Value type: <string>
+ Definition: Should be "pci". As specified in designware-pcie.txt
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: Should be 3. As specified in designware-pcie.txt
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: Should be 2. As specified in designware-pcie.txt
+
+- ranges:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: As specified in designware-pcie.txt
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: MSI interrupt
+
+- interrupt-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Should contain "msi"
+
+- #interrupt-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: Should be 1. As specified in designware-pcie.txt
+
+- interrupt-map-mask:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: As specified in designware-pcie.txt
+
+- interrupt-map:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: As specified in designware-pcie.txt
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: List of phandle and clock specifier pairs as listed
+ in clock-names property
+
+- clock-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Should contain the following entries
+ - "iface" Configuration AHB clock
+
+- clock-names:
+ Usage: required for ipq/apq8064
+ Value type: <stringlist>
+ Definition: Should contain the following entries
+ - "core" Clocks the pcie hw block
+ - "phy" Clocks the pcie PHY block
+- clock-names:
+ Usage: required for apq8084
+ Value type: <stringlist>
+ Definition: Should contain the following entries
+ - "aux" Auxiliary (AUX) clock
+ - "bus_master" Master AXI clock
+ - "bus_slave" Slave AXI clock
+- resets:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: List of phandle and reset specifier pairs as listed
+ in reset-names property
+
+- reset-names:
+ Usage: required for ipq/apq8064
+ Value type: <stringlist>
+ Definition: Should contain the following entries
+ - "axi" AXI reset
+ - "ahb" AHB reset
+ - "por" POR reset
+ - "pci" PCI reset
+ - "phy" PHY reset
+
+- reset-names:
+ Usage: required for apq8084
+ Value type: <stringlist>
+ Definition: Should contain the following entries
+ - "core" Core reset
+
+- power-domains:
+ Usage: required for apq8084
+ Value type: <prop-encoded-array>
+ Definition: A phandle and power domain specifier pair to the
+ power domain which is responsible for collapsing
+ and restoring power to the peripheral
+
+- vdda-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: A phandle to the core analog power supply
+
+- vdda_phy-supply:
+ Usage: required for ipq/apq8064
+ Value type: <phandle>
+ Definition: A phandle to the analog power supply for PHY
+
+- vdda_refclk-supply:
+ Usage: required for ipq/apq8064
+ Value type: <phandle>
+ Definition: A phandle to the analog power supply for IC which generates
+ reference clock
+
+- phys:
+ Usage: required for apq8084
+ Value type: <phandle>
+ Definition: List of phandle(s) as listed in phy-names property
+
+- phy-names:
+ Usage: required for apq8084
+ Value type: <stringlist>
+ Definition: Should contain "pciephy"
+
+- <name>-gpios:
+ Usage: optional
+ Value type: <prop-encoded-array>
+ Definition: List of phandle and gpio specifier pairs. Should contain
+ - "perst-gpios" PCIe endpoint reset signal line
+ - "wake-gpios" PCIe endpoint wake signal line
+
+* Example for ipq/apq8064
+ pcie@1b500000 {
+ compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie";
+ reg = <0x1b500000 0x1000
+ 0x1b502000 0x80
+ 0x1b600000 0x100
+ 0x0ff00000 0x100000>;
+ reg-names = "dbi", "elbi", "parf", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
+ 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
+ interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ clocks = <&gcc PCIE_A_CLK>,
+ <&gcc PCIE_H_CLK>,
+ <&gcc PCIE_PHY_CLK>;
+ clock-names = "core", "iface", "phy";
+ resets = <&gcc PCIE_ACLK_RESET>,
+ <&gcc PCIE_HCLK_RESET>,
+ <&gcc PCIE_POR_RESET>,
+ <&gcc PCIE_PCI_RESET>,
+ <&gcc PCIE_PHY_RESET>;
+ reset-names = "axi", "ahb", "por", "pci", "phy";
+ pinctrl-0 = <&pcie_pins_default>;
+ pinctrl-names = "default";
+ };
+
+* Example for apq8084
+ pcie0@fc520000 {
+ compatible = "qcom,pcie-apq8084", "snps,dw-pcie";
+ reg = <0xfc520000 0x2000>,
+ <0xff000000 0x1000>,
+ <0xff001000 0x1000>,
+ <0xff002000 0x2000>;
+ reg-names = "parf", "dbi", "elbi", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /* I/O */
+ 0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */
+ interrupts = <GIC_SPI 243 IRQ_TYPE_NONE>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>;
+ clock-names = "iface", "master_bus", "slave_bus", "aux";
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "core";
+ power-domains = <&gcc PCIE0_GDSC>;
+ vdda-supply = <&pma8084_l3>;
+ phys = <&pciephy0>;
+ phy-names = "pciephy";
+ perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&pcie0_pins_default>;
+ pinctrl-names = "default";
+ };
diff --git a/dts/Bindings/pci/rcar-pci.txt b/dts/Bindings/pci/rcar-pci.txt
index 29d3b98..558fe52 100644
--- a/dts/Bindings/pci/rcar-pci.txt
+++ b/dts/Bindings/pci/rcar-pci.txt
@@ -1,8 +1,16 @@
* Renesas RCar PCIe interface
Required properties:
-- compatible: should contain one of the following
- "renesas,pcie-r8a7779", "renesas,pcie-r8a7790", "renesas,pcie-r8a7791"
+compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
+ "renesas,pcie-r8a7790" for the R8A7790 SoC;
+ "renesas,pcie-r8a7791" for the R8A7791 SoC;
+ "renesas,pcie-r8a7795" for the R8A7795 SoC;
+ "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.
+
+ When compatible with the generic version, nodes must list the
+ SoC-specific version corresponding to the platform first
+ followed by the generic version.
+
- reg: base address and length of the pcie controller registers.
- #address-cells: set to <3>
- #size-cells: set to <2>
@@ -25,7 +33,7 @@ Example:
SoC specific DT Entry:
pcie: pcie@fe000000 {
- compatible = "renesas,pcie-r8a7791";
+ compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";
reg = <0 0xfe000000 0 0x80000>;
#address-cells = <3>;
#size-cells = <2>;
diff --git a/dts/Bindings/phy/brcm,brcmstb-sata-phy.txt b/dts/Bindings/phy/brcm,brcmstb-sata-phy.txt
index 7f81ef9..d87ab7c 100644
--- a/dts/Bindings/phy/brcm,brcmstb-sata-phy.txt
+++ b/dts/Bindings/phy/brcm,brcmstb-sata-phy.txt
@@ -2,6 +2,7 @@
Required properties:
- compatible: should be one or more of
+ "brcm,bcm7425-sata-phy"
"brcm,bcm7445-sata-phy"
"brcm,phy-sata3"
- address-cells: should be 1
diff --git a/dts/Bindings/phy/phy-ath79-usb.txt b/dts/Bindings/phy/phy-ath79-usb.txt
new file mode 100644
index 0000000..cafe219
--- /dev/null
+++ b/dts/Bindings/phy/phy-ath79-usb.txt
@@ -0,0 +1,18 @@
+* Atheros AR71XX/9XXX USB PHY
+
+Required properties:
+- compatible: "qca,ar7100-usb-phy"
+- #phys-cells: should be 0
+- reset-names: "usb-phy"[, "usb-suspend-override"]
+- resets: references to the reset controllers
+
+Example:
+
+ usb-phy {
+ compatible = "qca,ar7100-usb-phy";
+
+ reset-names = "usb-phy", "usb-suspend-override";
+ resets = <&rst 4>, <&rst 3>;
+
+ #phy-cells = <0>;
+ };
diff --git a/dts/Bindings/phy/phy-hi6220-usb.txt b/dts/Bindings/phy/phy-hi6220-usb.txt
new file mode 100644
index 0000000..f17a56e
--- /dev/null
+++ b/dts/Bindings/phy/phy-hi6220-usb.txt
@@ -0,0 +1,16 @@
+Hisilicon hi6220 usb PHY
+-----------------------
+
+Required properties:
+- compatible: should be "hisilicon,hi6220-usb-phy"
+- #phy-cells: must be 0
+- hisilicon,peripheral-syscon: phandle of syscon used to control phy.
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+Example:
+ usb_phy: usbphy {
+ compatible = "hisilicon,hi6220-usb-phy";
+ #phy-cells = <0>;
+ phy-supply = <&fixed_5v_hub>;
+ hisilicon,peripheral-syscon = <&sys_ctrl>;
+ };
diff --git a/dts/Bindings/phy/rcar-gen3-phy-usb2.txt b/dts/Bindings/phy/rcar-gen3-phy-usb2.txt
new file mode 100644
index 0000000..2390e4e
--- /dev/null
+++ b/dts/Bindings/phy/rcar-gen3-phy-usb2.txt
@@ -0,0 +1,39 @@
+* Renesas R-Car generation 3 USB 2.0 PHY
+
+This file provides information on what the device node for the R-Car generation
+3 USB 2.0 PHY contains.
+
+Required properties:
+- compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
+ SoC.
+- reg: offset and length of the partial USB 2.0 Host register block.
+- reg-names: must be "usb2_host".
+- clocks: clock phandle and specifier pair(s).
+- #phy-cells: see phy-bindings.txt in the same directory, must be <0>.
+
+Optional properties:
+To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are
+combined, the device tree node should set HSUSB properties to reg and reg-names
+properties. This is because HSUSB has registers to select USB 2.0 host or
+peripheral at that channel:
+- reg: offset and length of the partial HSUSB register block.
+- reg-names: must be "hsusb".
+- interrupts: interrupt specifier for the PHY.
+
+Example (R-Car H3):
+
+ usb-phy@ee080200 {
+ compatible = "renesas,usb2-phy-r8a7795";
+ reg = <0 0xee080200 0 0x700>, <0 0xe6590100 0 0x100>;
+ reg-names = "usb2_host", "hsusb";
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7795_CLK_EHCI0>,
+ <&mstp7_clks R8A7795_CLK_HSUSB>;
+ };
+
+ usb-phy@ee0a0200 {
+ compatible = "renesas,usb2-phy-r8a7795";
+ reg = <0 0xee0a0200 0 0x700>;
+ reg-names = "usb2_host";
+ clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
+ };
diff --git a/dts/Bindings/phy/rockchip-usb-phy.txt b/dts/Bindings/phy/rockchip-usb-phy.txt
index 826454a..68498d5 100644
--- a/dts/Bindings/phy/rockchip-usb-phy.txt
+++ b/dts/Bindings/phy/rockchip-usb-phy.txt
@@ -1,7 +1,10 @@
ROCKCHIP USB2 PHY
Required properties:
- - compatible: rockchip,rk3288-usb-phy
+ - compatible: matching the soc type, one of
+ "rockchip,rk3066a-usb-phy"
+ "rockchip,rk3188-usb-phy"
+ "rockchip,rk3288-usb-phy"
- rockchip,grf : phandle to the syscon managing the "general
register files"
- #address-cells: should be 1
@@ -21,6 +24,7 @@ required properties:
Optional Properties:
- clocks : phandle + clock specifier for the phy clocks
- clock-names: string, clock name, must be "phyclk"
+- #clock-cells: for users of the phy-pll, should be 0
Example:
diff --git a/dts/Bindings/phy/sun4i-usb-phy.txt b/dts/Bindings/phy/sun4i-usb-phy.txt
index 0cebf74..95736d7 100644
--- a/dts/Bindings/phy/sun4i-usb-phy.txt
+++ b/dts/Bindings/phy/sun4i-usb-phy.txt
@@ -9,6 +9,7 @@ Required properties:
* allwinner,sun7i-a20-usb-phy
* allwinner,sun8i-a23-usb-phy
* allwinner,sun8i-a33-usb-phy
+ * allwinner,sun8i-h3-usb-phy
- reg : a list of offset + length pairs
- reg-names :
* "phy_ctrl"
diff --git a/dts/Bindings/phy/ti-phy.txt b/dts/Bindings/phy/ti-phy.txt
index 9cf9446..a3b3945 100644
--- a/dts/Bindings/phy/ti-phy.txt
+++ b/dts/Bindings/phy/ti-phy.txt
@@ -31,6 +31,8 @@ OMAP USB2 PHY
Required properties:
- compatible: Should be "ti,omap-usb2"
+ Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
+ in DRA7x
- reg : Address and length of the register set for the device.
- #phy-cells: determine the number of cells that should be given in the
phandle while referencing this phy.
@@ -40,10 +42,14 @@ Required properties:
* "wkupclk" - wakeup clock.
* "refclk" - reference clock (optional).
-Optional properties:
+Deprecated properties:
- ctrl-module : phandle of the control module used by PHY driver to power on
the PHY.
+Recommended properies:
+- syscon-phy-power : phandle/offset pair. Phandle to the system control
+ module and the register offset to power on/off the PHY.
+
This is usually a subnode of ocp2scp to which it is connected.
usb2phy@4a0ad080 {
@@ -77,14 +83,22 @@ Required properties:
* "div-clk" - apll clock
Optional properties:
- - ctrl-module : phandle of the control module used by PHY driver to power on
- the PHY.
- id: If there are multiple instance of the same type, in order to
differentiate between each instance "id" can be used (e.g., multi-lane PCIe
PHY). If "id" is not provided, it is set to default value of '1'.
- syscon-pllreset: Handle to system control region that contains the
CTRL_CORE_SMA_SW_0 register and register offset to the CTRL_CORE_SMA_SW_0
register that contains the SATA_PLL_SOFT_RESET bit. Only valid for sata_phy.
+ - syscon-pcs : phandle/offset pair. Phandle to the system control module and the
+ register offset to write the PCS delay value.
+
+Deprecated properties:
+ - ctrl-module : phandle of the control module used by PHY driver to power on
+ the PHY.
+
+Recommended properies:
+ - syscon-phy-power : phandle/offset pair. Phandle to the system control
+ module and the register offset to power on/off the PHY.
This is usually a subnode of ocp2scp to which it is connected.
diff --git a/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index b321b26..9213b27 100644
--- a/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -17,7 +17,10 @@ Required properties:
"allwinner,sun8i-a23-pinctrl"
"allwinner,sun8i-a23-r-pinctrl"
"allwinner,sun8i-a33-pinctrl"
+ "allwinner,sun9i-a80-pinctrl"
+ "allwinner,sun9i-a80-r-pinctrl"
"allwinner,sun8i-a83t-pinctrl"
+ "allwinner,sun8i-h3-pinctrl"
- reg: Should contain the register physical address and length for the
pin controller.
diff --git a/dts/Bindings/pinctrl/brcm,cygnus-gpio.txt b/dts/Bindings/pinctrl/brcm,iproc-gpio.txt
index 16589fb..e427792 100644
--- a/dts/Bindings/pinctrl/brcm,cygnus-gpio.txt
+++ b/dts/Bindings/pinctrl/brcm,iproc-gpio.txt
@@ -1,4 +1,4 @@
-Broadcom Cygnus GPIO/PINCONF Controller
+Broadcom iProc GPIO/PINCONF Controller
Required properties:
@@ -7,9 +7,12 @@ Required properties:
"brcm,cygnus-crmu-gpio" or "brcm,iproc-gpio"
- reg:
- Define the base and range of the I/O address space that contains the Cygnus
+ Define the base and range of the I/O address space that contains SoC
GPIO/PINCONF controller registers
+- ngpios:
+ Total number of in-use slots in GPIO controller
+
- #gpio-cells:
Must be two. The first cell is the GPIO pin number (within the
controller's pin space) and the second cell is used for the following:
@@ -57,6 +60,7 @@ Example:
compatible = "brcm,cygnus-ccm-gpio";
reg = <0x1800a000 0x50>,
<0x0301d164 0x20>;
+ ngpios = <24>;
#gpio-cells = <2>;
gpio-controller;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -78,6 +82,7 @@ Example:
gpio_asiu: gpio@180a5000 {
compatible = "brcm,cygnus-asiu-gpio";
reg = <0x180a5000 0x668>;
+ ngpios = <146>;
#gpio-cells = <2>;
gpio-controller;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/dts/Bindings/pinctrl/brcm,nsp-gpio.txt b/dts/Bindings/pinctrl/brcm,nsp-gpio.txt
new file mode 100644
index 0000000..0844168
--- /dev/null
+++ b/dts/Bindings/pinctrl/brcm,nsp-gpio.txt
@@ -0,0 +1,80 @@
+Broadcom Northstar plus (NSP) GPIO/PINCONF Controller
+
+Required properties:
+- compatible:
+ Must be "brcm,nsp-gpio-a"
+
+- reg:
+ Should contain the register physical address and length for each of
+ GPIO base, IO control registers
+
+- #gpio-cells:
+ Must be two. The first cell is the GPIO pin number (within the
+ controller's pin space) and the second cell is used for the following:
+ bit[0]: polarity (0 for active high and 1 for active low)
+
+- gpio-controller:
+ Specifies that the node is a GPIO controller
+
+- ngpios:
+ Number of gpios supported (58x25 supports 32 and 58x23 supports 24)
+
+Optional properties:
+- interrupts:
+ Interrupt ID
+
+- interrupt-controller:
+ Specifies that the node is an interrupt controller
+
+- gpio-ranges:
+ Specifies the mapping between gpio controller and pin-controllers pins.
+ This requires 4 fields in cells defined as -
+ 1. Phandle of pin-controller.
+ 2. GPIO base pin offset.
+ 3 Pin-control base pin offset.
+ 4. number of gpio pins which are linearly mapped from pin base.
+
+Supported generic PINCONF properties in child nodes:
+- pins:
+ The list of pins (within the controller's own pin space) that properties
+ in the node apply to. Pin names are "gpio-<pin>"
+
+- bias-disable:
+ Disable pin bias
+
+- bias-pull-up:
+ Enable internal pull up resistor
+
+- bias-pull-down:
+ Enable internal pull down resistor
+
+- drive-strength:
+ Valid drive strength values include 2, 4, 6, 8, 10, 12, 14, 16 (mA)
+
+Example:
+
+ gpioa: gpio@18000020 {
+ compatible = "brcm,nsp-gpio-a";
+ reg = <0x18000020 0x100>,
+ <0x1803f1c4 0x1c>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ ngpios = <32>;
+ gpio-ranges = <&pinctrl 0 0 31>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+
+ /* Hog a few default settings */
+ pinctrl-names = "default";
+ pinctrl-0 = <&led>;
+ led: led {
+ pins = "gpio-1";
+ bias-pull-up;
+ };
+
+ pwr: pwr {
+ gpio-hog;
+ gpios = <3 1>;
+ output-high;
+ };
+ };
diff --git a/dts/Bindings/pinctrl/lantiq,pinctrl-xway.txt b/dts/Bindings/pinctrl/lantiq,pinctrl-xway.txt
index e89b467..8e5216b 100644
--- a/dts/Bindings/pinctrl/lantiq,pinctrl-xway.txt
+++ b/dts/Bindings/pinctrl/lantiq,pinctrl-xway.txt
@@ -1,7 +1,16 @@
Lantiq XWAY pinmux controller
Required properties:
-- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9"
+- compatible: "lantiq,pinctrl-xway", (DEPRECATED: Use "lantiq,pinctrl-danube")
+ "lantiq,pinctrl-xr9", (DEPRECATED: Use "lantiq,xrx100-pinctrl" or
+ "lantiq,xrx200-pinctrl")
+ "lantiq,pinctrl-ase", (DEPRECATED: Use "lantiq,ase-pinctrl")
+ "lantiq,<chip>-pinctrl", where <chip> is:
+ "ase" (XWAY AMAZON Family)
+ "danube" (XWAY DANUBE Family)
+ "xrx100" (XWAY xRX100 Family)
+ "xrx200" (XWAY xRX200 Family)
+ "xrx300" (XWAY xRX300 Family)
- reg: Should contain the physical address and length of the gpio/pinmux
register range
@@ -36,19 +45,87 @@ Required subnode-properties:
Valid values for group and function names:
+XWAY: (DEPRECATED: Use DANUBE)
mux groups:
exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1,
ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3,
- spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2,
+ spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2,
gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2,
req3
- additional mux groups (XR9 only):
- mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4
+ functions:
+ spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu
+
+XR9: ( DEPRECATED: Use xRX100/xRX200)
+ mux groups:
+ exin0, exin1, exin2, exin3, exin4, jtag, ebu a23, ebu a24, ebu a25,
+ ebu clk, ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy,
+ nand rd, spi, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6,
+ asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1,
+ clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio,
+ gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2
+
+ functions:
+ spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio, gphy
+
+AMAZON:
+ mux groups:
+ exin0, exin1, exin2, jtag, spi_di, spi_do, spi_clk, spi_cs1, spi_cs2,
+ spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc, stp, gpt1, gpt2, gpt3, clkout0,
+ clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2
+
+ functions:
+ spi, asc, cgu, jtag, exin, stp, gpt, mdio, ephy, dfe
+
+DANUBE:
+ mux groups:
+ exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1,
+ ebu wait, nand ale, nand cs1, nand cle, spi_di, spi_do, spi_clk, spi_cs1,
+ spi_cs2, spi_cs3, spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi,
+ gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3,
+ req1, req2, req3, dfe led0, dfe led1
functions:
- spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio
+ spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, dfe
+xRX100:
+ mux groups:
+ exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk,
+ ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
+ spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5,
+ spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1,
+ clkout2, clkout3, gnt1, gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio,
+ dfe led0, dfe led1
+
+ functions:
+ spi, asc, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe
+
+xRX200:
+ mux groups:
+ exin0, exin1, exin2, exin3, exin4, ebu a23, ebu a24, ebu a25, ebu clk,
+ ebu cs1, ebu wait, nand ale, nand cs1, nand cle, nand rdy, nand rd,
+ spi_di, spi_do, spi_clk, spi_cs1, spi_cs2, spi_cs3, spi_cs4, spi_cs5,
+ spi_cs6, usif uart_rx, usif uart_tx, usif uart_rts, usif uart_cts,
+ usif uart_dtr, usif uart_dsr, usif uart_dcd, usif uart_ri, usif spi_di,
+ usif spi_do, usif spi_clk, usif spi_cs0, usif spi_cs1, usif spi_cs2,
+ stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1,
+ gnt2, gnt3, gnt4, req1, req2, req3, req4, mdio, dfe led0, dfe led1,
+ gphy0 led0, gphy0 led1, gphy0 led2, gphy1 led0, gphy1 led1, gphy1 led2
+
+ functions:
+ spi, usif, cgu, exin, stp, gpt, nmi, pci, ebu, mdio, dfe, gphy
+
+xRX300:
+ mux groups:
+ exin0, exin1, exin2, exin4, nand ale, nand cs0, nand cs1, nand cle,
+ nand rdy, nand rd, nand_d0, nand_d1, nand_d2, nand_d3, nand_d4, nand_d5,
+ nand_d6, nand_d7, nand_d1, nand wr, nand wp, nand se, spi_di, spi_do,
+ spi_clk, spi_cs1, spi_cs4, spi_cs6, usif uart_rx, usif uart_tx,
+ usif spi_di, usif spi_do, usif spi_clk, usif spi_cs0, stp, clkout2,
+ mdio, dfe led0, dfe led1, ephy0 led0, ephy0 led1, ephy1 led0, ephy1 led1
+
+ functions:
+ spi, usif, cgu, exin, stp, ebu, mdio, dfe, ephy
Definition of pin configurations:
@@ -62,15 +139,32 @@ Optional subnode-properties:
0: none, 1: down, 2: up.
- lantiq,open-drain: Boolean, enables open-drain on the defined pin.
-Valid values for XWAY pin names:
+Valid values for XWAY pin names: (DEPRECATED: Use DANUBE)
Pinconf pins can be referenced via the names io0-io31.
-Valid values for XR9 pin names:
+Valid values for XR9 pin names: (DEPRECATED: Use xrX100/xRX200)
Pinconf pins can be referenced via the names io0-io55.
+Valid values for AMAZON pin names:
+ Pinconf pins can be referenced via the names io0-io31.
+
+Valid values for DANUBE pin names:
+ Pinconf pins can be referenced via the names io0-io31.
+
+Valid values for xRX100 pin names:
+ Pinconf pins can be referenced via the names io0-io55.
+
+Valid values for xRX200 pin names:
+ Pinconf pins can be referenced via the names io0-io49.
+
+Valid values for xRX300 pin names:
+ Pinconf pins can be referenced via the names io0-io1,io3-io6,io8-io11,
+ io13-io19,io23-io27,io34-io36,
+ io42-io43,io48-io61.
+
Example:
gpio: pinmux@E100B10 {
- compatible = "lantiq,pinctrl-xway";
+ compatible = "lantiq,danube-pinctrl";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
diff --git a/dts/Bindings/pinctrl/pinctrl-mt65xx.txt b/dts/Bindings/pinctrl/pinctrl-mt65xx.txt
index 0480bc3..9ffb0b2 100644
--- a/dts/Bindings/pinctrl/pinctrl-mt65xx.txt
+++ b/dts/Bindings/pinctrl/pinctrl-mt65xx.txt
@@ -4,10 +4,11 @@ The Mediatek's Pin controller is used to control SoC pins.
Required properties:
- compatible: value should be one of the following.
- (a) "mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl.
- (b) "mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl.
- (c) "mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl.
- (d) "mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl.
+ "mediatek,mt2701-pinctrl", compatible with mt2701 pinctrl.
+ "mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl.
+ "mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl.
+ "mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl.
+ "mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl.
- pins-are-numbered: Specify the subnodes are using numbered pinmux to
specify pins.
- gpio-controller : Marks the device node as a gpio controller.
diff --git a/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.txt
new file mode 100644
index 0000000..e312a71
--- /dev/null
+++ b/dts/Bindings/pinctrl/qcom,msm8996-pinctrl.txt
@@ -0,0 +1,199 @@
+Qualcomm MSM8996 TLMM block
+
+This binding describes the Top Level Mode Multiplexer block found in the
+MSM8996 platform.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be "qcom,msm8996-pinctrl"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: the base address and size of the TLMM register space.
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the TLMM summary IRQ.
+
+- interrupt-controller:
+ Usage: required
+ Value type: <none>
+ Definition: identifies this node as an interrupt controller
+
+- #interrupt-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 2. Specifying the pin number and flags, as defined
+ in <dt-bindings/interrupt-controller/irq.h>
+
+- gpio-controller:
+ Usage: required
+ Value type: <none>
+ Definition: identifies this node as a gpio controller
+
+- #gpio-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 2. Specifying the pin number and flags, as defined
+ in <dt-bindings/gpio/gpio.h>
+
+Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
+a general description of GPIO and interrupt bindings.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+The pin configuration nodes act as a container for an arbitrary number of
+subnodes. Each of these subnodes represents some desired configuration for a
+pin, a group, or a list of pins or groups. This configuration can include the
+mux function to select on those pin(s)/group(s), and various pin configuration
+parameters, such as pull-up, drive strength, etc.
+
+
+PIN CONFIGURATION NODES:
+
+The name of each subnode is not important; all subnodes should be enumerated
+and processed purely based on their content.
+
+Each subnode only affects those parameters that are explicitly listed. In
+other words, a subnode that lists a mux function but no pin configuration
+parameters implies no information about any pin configuration parameters.
+Similarly, a pin subnode that describes a pullup parameter implies no
+information about e.g. the mux function.
+
+
+The following generic properties as defined in pinctrl-bindings.txt are valid
+to specify in a pin configuration subnode:
+
+- pins:
+ Usage: required
+ Value type: <string-array>
+ Definition: List of gpio pins affected by the properties specified in
+ this subnode.
+
+ Valid pins are:
+ gpio0-gpio149
+ Supports mux, bias and drive-strength
+
+ sdc1_clk, sdc1_cmd, sdc1_data sdc2_clk, sdc2_cmd,
+ sdc2_data sdc1_rclk
+ Supports bias and drive-strength
+
+- function:
+ Usage: required
+ Value type: <string>
+ Definition: Specify the alternative function to be configured for the
+ specified pins. Functions are only valid for gpio pins.
+ Valid values are:
+
+ blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
+ bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
+ qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
+ dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
+ blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
+ mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
+ atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
+ cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
+ pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
+ qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
+ qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
+ atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
+ atest_usb20, atest_char0, dac_calib10, qdss_stm10,
+ qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
+ blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
+ qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
+ qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
+ dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
+ qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
+ dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
+ dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
+ dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
+ dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
+ sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
+ qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
+ uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
+ blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
+ qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
+ blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
+ cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
+ blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
+ qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
+ isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
+ qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
+ sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
+ gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
+ qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
+ tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
+ qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
+ sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
+ sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
+ ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
+ blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
+ pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
+ qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
+ qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
+ gpio
+
+- bias-disable:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as no pull.
+
+- bias-pull-down:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as pull down.
+
+- bias-pull-up:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins should be configued as pull up.
+
+- output-high:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ high.
+ Not valid for sdc pins.
+
+- output-low:
+ Usage: optional
+ Value type: <none>
+ Definition: The specified pins are configured in output mode, driven
+ low.
+ Not valid for sdc pins.
+
+- drive-strength:
+ Usage: optional
+ Value type: <u32>
+ Definition: Selects the drive strength for the specified pins, in mA.
+ Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16
+
+Example:
+
+ tlmm: pinctrl@01010000 {
+ compatible = "qcom,msm8996-pinctrl";
+ reg = <0x01010000 0x300000>;
+ interrupts = <0 208 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ uart_console_active: uart_console_active {
+ mux {
+ pins = "gpio4", "gpio5";
+ function = "blsp_uart8";
+ };
+
+ config {
+ pins = "gpio4", "gpio5";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+ };
diff --git a/dts/Bindings/pinctrl/qcom,pmic-gpio.txt b/dts/Bindings/pinctrl/qcom,pmic-gpio.txt
index 1ae63c0..a90c812 100644
--- a/dts/Bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/dts/Bindings/pinctrl/qcom,pmic-gpio.txt
@@ -14,6 +14,7 @@ PMIC's from Qualcomm.
"qcom,pm8917-gpio"
"qcom,pm8921-gpio"
"qcom,pm8941-gpio"
+ "qcom,pm8994-gpio"
"qcom,pma8084-gpio"
- reg:
@@ -79,6 +80,7 @@ to specify in a pin configuration subnode:
gpio1-gpio38 for pm8917
gpio1-gpio44 for pm8921
gpio1-gpio36 for pm8941
+ gpio1-gpio22 for pm8994
gpio1-gpio22 for pma8084
- function:
diff --git a/dts/Bindings/pinctrl/qcom,pmic-mpp.txt b/dts/Bindings/pinctrl/qcom,pmic-mpp.txt
index d7803a2..d74e631 100644
--- a/dts/Bindings/pinctrl/qcom,pmic-mpp.txt
+++ b/dts/Bindings/pinctrl/qcom,pmic-mpp.txt
@@ -15,6 +15,7 @@ of PMIC's from Qualcomm.
"qcom,pm8917-mpp",
"qcom,pm8921-mpp",
"qcom,pm8941-mpp",
+ "qcom,pm8994-mpp",
"qcom,pma8084-mpp",
- reg:
diff --git a/dts/Bindings/pinctrl/rockchip,pinctrl.txt b/dts/Bindings/pinctrl/rockchip,pinctrl.txt
index 391ef4b..0cd701b 100644
--- a/dts/Bindings/pinctrl/rockchip,pinctrl.txt
+++ b/dts/Bindings/pinctrl/rockchip,pinctrl.txt
@@ -21,7 +21,8 @@ defined as gpio sub-nodes of the pinmux controller.
Required properties for iomux controller:
- compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl"
"rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl"
- "rockchip,rk3288-pinctrl", "rockchip,rk3368-pinctrl"
+ "rockchip,rk3228-pinctrl", "rockchip,rk3288-pinctrl"
+ "rockchip,rk3368-pinctrl"
- rockchip,grf: phandle referencing a syscon providing the
"general register files"
diff --git a/dts/Bindings/pinctrl/samsung-pinctrl.txt b/dts/Bindings/pinctrl/samsung-pinctrl.txt
index 9d2a995..6db16b9 100644
--- a/dts/Bindings/pinctrl/samsung-pinctrl.txt
+++ b/dts/Bindings/pinctrl/samsung-pinctrl.txt
@@ -17,6 +17,7 @@ Required Properties:
- "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
- "samsung,exynos5250-pinctrl": for Exynos5250 compatible pin-controller.
- "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller.
+ - "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller.
- "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller.
- "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller.
diff --git a/dts/Bindings/pwm/lpc32xx-pwm.txt b/dts/Bindings/pwm/lpc32xx-pwm.txt
index cfe1db3..74b5bc5 100644
--- a/dts/Bindings/pwm/lpc32xx-pwm.txt
+++ b/dts/Bindings/pwm/lpc32xx-pwm.txt
@@ -6,7 +6,12 @@ Required properties:
Examples:
-pwm@0x4005C000 {
+pwm@4005c000 {
compatible = "nxp,lpc3220-pwm";
- reg = <0x4005C000 0x8>;
+ reg = <0x4005c000 0x4>;
+};
+
+pwm@4005c004 {
+ compatible = "nxp,lpc3220-pwm";
+ reg = <0x4005c004 0x4>;
};
diff --git a/dts/Bindings/pwm/pwm-omap-dmtimer.txt b/dts/Bindings/pwm/pwm-omap-dmtimer.txt
new file mode 100644
index 0000000..5befb53
--- /dev/null
+++ b/dts/Bindings/pwm/pwm-omap-dmtimer.txt
@@ -0,0 +1,18 @@
+* OMAP PWM for dual-mode timers
+
+Required properties:
+- compatible: Shall contain "ti,omap-dmtimer-pwm".
+- ti,timers: phandle to PWM capable OMAP timer. See arm/omap/timer.txt for info
+ about these timers.
+- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of
+ the cells format.
+
+Optional properties:
+- ti,prescaler: Should be a value between 0 and 7, see the timers datasheet
+
+Example:
+ pwm9: dmtimer-pwm@9 {
+ compatible = "ti,omap-dmtimer-pwm";
+ ti,timers = <&timer9>;
+ #pwm-cells = <3>;
+ };
diff --git a/dts/Bindings/regulator/lm363x-regulator.txt b/dts/Bindings/regulator/lm363x-regulator.txt
new file mode 100644
index 0000000..8f14df9
--- /dev/null
+++ b/dts/Bindings/regulator/lm363x-regulator.txt
@@ -0,0 +1,34 @@
+TI LMU LM363x regulator device tree bindings
+
+LM363x regulator driver supports LM3631 and LM3632.
+LM3631 has five regulators and LM3632 supports three regulators.
+
+Required property:
+ - compatible: "ti,lm363x-regulator"
+
+Optional properties:
+ LM3632 has external enable pins for two LDOs.
+ - ti,lcm-en1-gpio: A GPIO specifier for Vpos control pin.
+ - ti,lcm-en2-gpio: A GPIO specifier for Vneg control pin.
+
+Child nodes:
+ LM3631
+ - vboost
+ - vcont
+ - voref
+ - vpos
+ - vneg
+
+ LM3632
+ - vboost
+ - vpos
+ - vneg
+
+ Optional properties of a child node:
+ Each sub-node should contain the constraints and initialization.
+ Please refer to [1].
+
+Examples: Please refer to ti-lmu dt-bindings [2].
+
+[1] ../regulator/regulator.txt
+[2] ../mfd/ti-lmu.txt
diff --git a/dts/Bindings/regulator/pv88060.txt b/dts/Bindings/regulator/pv88060.txt
new file mode 100644
index 0000000..10a6dad
--- /dev/null
+++ b/dts/Bindings/regulator/pv88060.txt
@@ -0,0 +1,124 @@
+* Powerventure Semiconductor PV88060 Voltage Regulator
+
+Required properties:
+- compatible: "pvs,pv88060".
+- reg: I2C slave address, usually 0x49.
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+ device. Each sub-node is identified using the node's name, with valid
+ values listed below. The content of each sub-node is defined by the
+ standard binding for regulators; see regulator.txt.
+ BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4,
+ SW5, and SW6.
+
+Optional properties:
+- Any optional property defined in regulator.txt
+
+Example
+
+ pmic: pv88060@49 {
+ compatible = "pvs,pv88060";
+ reg = <0x49>;
+ interrupt-parent = <&gpio>;
+ interrupts = <24 24>;
+
+ regulators {
+ BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <4387500>;
+ regulator-min-microamp = <1496000>;
+ regulator-max-microamp = <4189000>;
+ regulator-boot-on;
+ };
+
+ LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3350000>;
+ regulator-boot-on;
+ };
+
+ LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3350000>;
+ regulator-boot-on;
+ };
+
+ LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3350000>;
+ regulator-boot-on;
+ };
+
+ LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3350000>;
+ regulator-boot-on;
+ };
+
+ LDO5 {
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3350000>;
+ regulator-boot-on;
+ };
+
+ LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3350000>;
+ regulator-boot-on;
+ };
+
+ LDO7 {
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3350000>;
+ regulator-boot-on;
+ };
+
+ SW1 {
+ regulator-name = "sw1";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ SW2 {
+ regulator-name = "sw2";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ SW3 {
+ regulator-name = "sw3";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ SW4 {
+ regulator-name = "sw4";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ SW5 {
+ regulator-name = "sw5";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ SW6 {
+ regulator-name = "sw6";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+ };
+ }; \ No newline at end of file
diff --git a/dts/Bindings/regulator/pv88090.txt b/dts/Bindings/regulator/pv88090.txt
new file mode 100644
index 0000000..e52b2a9
--- /dev/null
+++ b/dts/Bindings/regulator/pv88090.txt
@@ -0,0 +1,65 @@
+* Powerventure Semiconductor PV88090 Voltage Regulator
+
+Required properties:
+- compatible: "pvs,pv88090".
+- reg: I2C slave address, usually 0x48.
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+ device. Each sub-node is identified using the node's name, with valid
+ values listed below. The content of each sub-node is defined by the
+ standard binding for regulators; see regulator.txt.
+ BUCK1, BUCK2, BUCK3, LDO1, and LDO2.
+
+Optional properties:
+- Any optional property defined in regulator.txt
+
+Example
+
+ pmic: pv88090@48 {
+ compatible = "pvs,pv88090";
+ reg = <0x48>;
+ interrupt-parent = <&gpio>;
+ interrupts = <24 24>;
+
+ regulators {
+ BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1393750>;
+ regulator-min-microamp = < 220000>;
+ regulator-max-microamp = <7040000>;
+ regulator-boot-on;
+ };
+
+ BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1393750>;
+ regulator-min-microamp = <1496000>;
+ regulator-max-microamp = <4189000>;
+ };
+
+ BUCK3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1393750>;
+ regulator-min-microamp = <1496000>;
+ regulator-max-microamp = <4189000>;
+ regulator-boot-on;
+ };
+
+ LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <4350000>;
+ regulator-boot-on;
+ };
+
+ LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = < 650000>;
+ regulator-max-microvolt = <2225000>;
+ regulator-boot-on;
+ };
+ };
+ };
diff --git a/dts/Bindings/soc/qcom,smd-rpm.txt b/dts/Bindings/regulator/qcom,smd-rpm-regulator.txt
index e27f5c4..1f8d6f8 100644
--- a/dts/Bindings/soc/qcom,smd-rpm.txt
+++ b/dts/Bindings/regulator/qcom,smd-rpm-regulator.txt
@@ -1,27 +1,17 @@
-Qualcomm Resource Power Manager (RPM) over SMD
+QCOM SMD RPM REGULATOR
-This driver is used to interface with the Resource Power Manager (RPM) found in
-various Qualcomm platforms. The RPM allows each component in the system to vote
-for state of the system resources, such as clocks, regulators and bus
-frequencies.
+The Qualcomm RPM over SMD regulator is modelled as a subdevice of the RPM.
+Because SMD is used as the communication transport mechanism, the RPM resides as
+a subnode of the SMD. As such, the SMD-RPM regulator requires that the SMD and
+RPM nodes be present.
-- compatible:
- Usage: required
- Value type: <string>
- Definition: must be one of:
- "qcom,rpm-msm8974"
+Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd.txt for
+information pertaining to the SMD node.
-- qcom,smd-channels:
- Usage: required
- Value type: <stringlist>
- Definition: Shared Memory channel used for communication with the RPM
+Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.txt for
+information regarding the RPM node.
-= SUBDEVICES
-
-The RPM exposes resources to its subnodes. The below bindings specify the set
-of valid subnodes that can operate on these resources.
-
-== Regulators
+== Regulator
Regulator nodes are identified by their compatible:
@@ -30,7 +20,9 @@ Regulator nodes are identified by their compatible:
Value type: <string>
Definition: must be one of:
"qcom,rpm-pm8841-regulators"
+ "qcom,rpm-pm8916-regulators"
"qcom,rpm-pm8941-regulators"
+ "qcom,rpm-pma8084-regulators"
- vdd_s1-supply:
- vdd_s2-supply:
@@ -48,6 +40,19 @@ Regulator nodes are identified by their compatible:
- vdd_s1-supply:
- vdd_s2-supply:
- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_l1_l2_l3-supply:
+- vdd_l4_l5_l6-supply:
+- vdd_l7-supply:
+- vdd_l8_l9_l10_l11_l12_l13_l14_l15_l16_l17_l18-supply:
+ Usage: optional (pm8916 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
- vdd_l1_l3-supply:
- vdd_l2_lvs1_2_3-supply:
- vdd_l4_l11-supply:
@@ -63,6 +68,35 @@ Regulator nodes are identified by their compatible:
Definition: reference to regulator supplying the input pin, as
described in the data sheet
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_s4-supply:
+- vdd_s5-supply:
+- vdd_s6-supply:
+- vdd_s7-supply:
+- vdd_s8-supply:
+- vdd_s9-supply:
+- vdd_s10-supply:
+- vdd_s11-supply:
+- vdd_s12-supply:
+- vdd_l1_l11-supply:
+- vdd_l2_l3_l4_l27-supply:
+- vdd_l5_l7-supply:
+- vdd_l6_l12_l14_l15_l26-supply:
+- vdd_l8-supply:
+- vdd_l9_l10_l13_l20_l23_l24-supply:
+- vdd_l16_l25-supply:
+- vdd_l17-supply:
+- vdd_l18-supply:
+- vdd_l19-supply:
+- vdd_l21-supply:
+- vdd_l22-supply:
+ Usage: optional (pma8084 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
The regulator node houses sub-nodes for each regulator within the device. Each
sub-node is identified using the node's name, with valid values listed for each
of the pmics below.
@@ -70,11 +104,20 @@ of the pmics below.
pm8841:
s1, s2, s3, s4, s5, s6, s7, s8
+pm8916:
+ s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+ l14, l15, l16, l17, l18
+
pm8941:
s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2,
lvs3, 5vs1, 5vs2
+pma8084:
+ s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
+ l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
+ l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1
+
The content of each sub-node is defined by the standard binding for regulators -
see regulator.txt.
@@ -114,4 +157,3 @@ see regulator.txt.
};
};
};
-
diff --git a/dts/Bindings/regulator/s5m8767-regulator.txt b/dts/Bindings/regulator/s5m8767-regulator.txt
deleted file mode 100644
index 2019131..0000000
--- a/dts/Bindings/regulator/s5m8767-regulator.txt
+++ /dev/null
@@ -1,163 +0,0 @@
-* Samsung S5M8767 Voltage and Current Regulator
-
-The Samsung S5M8767 is a multi-function device which includes voltage and
-current regulators, rtc, charger controller and other sub-blocks. It is
-interfaced to the host controller using a i2c interface. Each sub-block is
-addressed by the host system using different i2c slave address. This document
-describes the bindings for 'pmic' sub-block of s5m8767.
-
-Required properties:
-- compatible: Should be "samsung,s5m8767-pmic".
-- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
-
-- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
- units for buck2 when changing voltage using gpio dvs. Refer to [1] below
- for additional information.
-
-- s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
- units for buck3 when changing voltage using gpio dvs. Refer to [1] below
- for additional information.
-
-- s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
- units for buck4 when changing voltage using gpio dvs. Refer to [1] below
- for additional information.
-
-- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
- for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
-
-[1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
- property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
- property should specify atleast one voltage level (which would be a
- safe operating voltage).
-
- If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
- property is specified, then all the eight voltage values for the
- 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
-
-Optional properties:
-- interrupt-parent: Specifies the phandle of the interrupt controller to which
- the interrupts from s5m8767 are delivered to.
-- interrupts: Interrupt specifiers for two interrupt sources.
- - First interrupt specifier is for 'irq1' interrupt.
- - Second interrupt specifier is for 'alert' interrupt.
-- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
-- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
-- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
-
-Additional properties required if either of the optional properties are used:
-
-- s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
- the possible 8 options selectable by the dvs gpios. The value of this
- property should be between 0 and 7. If not specified or if out of range, the
- default value of this property is set to 0.
-
-- s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
- for dvs. The format of the gpio specifier depends in the gpio controller.
-
-Regulators: The regulators of s5m8767 that have to be instantiated should be
-included in a sub-node named 'regulators'. Regulator nodes included in this
-sub-node should be of the format as listed below.
-
- regulator_name {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE_1.0V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>; /* Normal Mode */
- };
- };
-The above regulator entries are defined in regulator bindings documentation
-except these properties:
- - op_mode: describes the different operating modes of the LDO's with
- power mode change in SOC. The different possible values are,
- 0 - always off mode
- 1 - on in normal mode
- 2 - low power mode
- 3 - suspend mode
- - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
- GPIO controlling this regulator (enable/disable); This is
- valid only for buck9.
-
-The following are the names of the regulators that the s5m8767 pmic block
-supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
-as per the datasheet of s5m8767.
-
- - LDOn
- - valid values for n are 1 to 28
- - Example: LDO1, LDO2, LDO28
- - BUCKn
- - valid values for n are 1 to 9.
- - Example: BUCK1, BUCK2, BUCK9
-
-The bindings inside the regulator nodes use the standard regulator bindings
-which are documented elsewhere.
-
-Example:
-
- s5m8767_pmic@66 {
- compatible = "samsung,s5m8767-pmic";
- reg = <0x66>;
-
- s5m8767,pmic-buck2-uses-gpio-dvs;
- s5m8767,pmic-buck3-uses-gpio-dvs;
- s5m8767,pmic-buck4-uses-gpio-dvs;
-
- s5m8767,pmic-buck-default-dvs-idx = <0>;
-
- s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
- <&gpx0 1 0>, /* DVS2 */
- <&gpx0 2 0>; /* DVS3 */
-
- s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
- <&gpx2 4 0>, /* SET2 */
- <&gpx2 5 0>; /* SET3 */
-
- s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
- <1250000>, <1200000>,
- <1150000>, <1100000>,
- <1000000>, <950000>;
-
- s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
- <1100000>, <1100000>,
- <1000000>, <1000000>,
- <1000000>, <1000000>;
-
- s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
- <1200000>, <1200000>,
- <1200000>, <1200000>,
- <1200000>, <1200000>;
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ABB_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- op_mode = <1>; /* Normal Mode */
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDD_ALIVE_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "VDD_MIF_1.2V";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vemmc_reg: BUCK9 {
- regulator-name = "VMEM_VDD_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- op_mode = <3>; /* Standby Mode */
- s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
- };
- };
- };
diff --git a/dts/Bindings/regulator/samsung,s2mpa01.txt b/dts/Bindings/regulator/samsung,s2mpa01.txt
new file mode 100644
index 0000000..bae3c7f
--- /dev/null
+++ b/dts/Bindings/regulator/samsung,s2mpa01.txt
@@ -0,0 +1,79 @@
+Binding for Samsung S2MPA01 regulator block
+===========================================
+
+This is a part of device tree bindings for S2M family multi-function devices.
+More information can be found in bindings/mfd/sec-core.txt file.
+
+The S2MPA01 device provide buck and LDO regulators.
+
+To register these with regulator framework instantiate under main device node
+a sub-node named "regulators" with more sub-nodes for each regulator using the
+common regulator binding documented in:
+ - Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Names of regulators supported by S2MPA01 device:
+ - LDOn
+ - valid values for n are 1 to 26
+ - Example: LDO1, LD02, LDO26
+ - BUCKn
+ - valid values for n are 1 to 10.
+ - Example: BUCK1, BUCK2, BUCK9
+Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of device.
+
+
+Optional properties of buck regulator nodes under "regulators" sub-node:
+ - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500
+ (default), 25000, or 50000. May be 0 for disabling the ramp delay on
+ BUCK{1,2,3,4}.
+
+ In the absence of the regulator-ramp-delay property, the default ramp
+ delay will be used.
+
+ Note: Some bucks share the ramp rate setting i.e. same ramp value
+ will be set for a particular group of bucks so provide the same
+ regulator-ramp-delay value for them.
+ Groups sharing ramp rate:
+ - buck{1,6},
+ - buck{2,4},
+ - buck{8,9,10}.
+
+Example:
+
+ s2mpa01_pmic@66 {
+ compatible = "samsung,s2mpa01-pmic";
+ reg = <0x66>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDDQ_MMC2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <50000>;
+ };
+ };
+ };
diff --git a/dts/Bindings/regulator/samsung,s2mps11.txt b/dts/Bindings/regulator/samsung,s2mps11.txt
new file mode 100644
index 0000000..27a48bf
--- /dev/null
+++ b/dts/Bindings/regulator/samsung,s2mps11.txt
@@ -0,0 +1,102 @@
+Binding for Samsung S2M family regulator block
+==============================================
+
+This is a part of device tree bindings for S2M family multi-function devices.
+More information can be found in bindings/mfd/sec-core.txt file.
+
+The S2MPS11/13/14/15 and S2MPU02 devices provide buck and LDO regulators.
+
+To register these with regulator framework instantiate under main device node
+a sub-node named "regulators" with more sub-nodes for each regulator using the
+common regulator binding documented in:
+ - Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Names of regulators supported by different devices:
+ - LDOn
+ - valid values for n are:
+ - S2MPS11: 1 to 38
+ - S2MPS13: 1 to 40
+ - S2MPS14: 1 to 25
+ - S2MPS15: 1 to 27
+ - S2MPU02: 1 to 28
+ - Example: LDO1, LDO2, LDO28
+ - BUCKn
+ - valid values for n are:
+ - S2MPS11: 1 to 10
+ - S2MPS13: 1 to 10
+ - S2MPS14: 1 to 5
+ - S2MPS15: 1 to 10
+ - S2MPU02: 1 to 7
+ - Example: BUCK1, BUCK2, BUCK9
+Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of device.
+
+
+Optional properties of the nodes under "regulators" sub-node:
+ - regulator-ramp-delay: ramp delay in uV/us. May be 6250, 12500,
+ 25000 (default) or 50000.
+
+ Additionally S2MPS11 supports disabling ramp delay for BUCK{2,3,4,6}
+ by setting it to <0>.
+
+ Note: On S2MPS11 some bucks share the ramp rate setting i.e. same ramp value
+ will be set for a particular group of bucks so provide the same
+ regulator-ramp-delay value for them.
+ Groups sharing ramp rate:
+ - buck{1,6},
+ - buck{3,4},
+ - buck{7,8,10}.
+
+ - samsung,ext-control-gpios: On S2MPS14 the LDO10, LDO11 and LDO12 can be
+ configured to external control over GPIO. To turn this feature on this
+ property must be added to the regulator sub-node:
+ - samsung,ext-control-gpios: GPIO specifier for one GPIO
+ controlling this regulator (enable/disable)
+ Example:
+ LDO12 {
+ regulator-name = "V_EMMC_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ samsung,ext-control-gpios = <&gpk0 2 0>;
+ };
+
+
+Example:
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ABB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_ALIVE_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <50000>;
+ };
+ };
+ };
diff --git a/dts/Bindings/regulator/samsung,s5m8767.txt b/dts/Bindings/regulator/samsung,s5m8767.txt
new file mode 100644
index 0000000..093edda
--- /dev/null
+++ b/dts/Bindings/regulator/samsung,s5m8767.txt
@@ -0,0 +1,145 @@
+Binding for Samsung S5M8767 regulator block
+===========================================
+
+This is a part of device tree bindings for S5M family multi-function devices.
+More information can be found in bindings/mfd/sec-core.txt file.
+
+The S5M8767 device provide buck and LDO regulators.
+
+To register these with regulator framework instantiate under main device node
+a sub-node named "regulators" with more sub-nodes for each regulator using the
+common regulator binding documented in:
+ - Documentation/devicetree/bindings/regulator/regulator.txt
+
+
+Required properties of the main device node (the parent!):
+ - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck2 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+ - s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck3 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+ - s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck4 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+ - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
+ for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
+
+ [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+ property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
+ property should specify atleast one voltage level (which would be a
+ safe operating voltage).
+
+ If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+ property is specified, then all the eight voltage values for the
+ 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties of the main device node (the parent!):
+ - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
+ - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
+ - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
+
+Additional properties required if either of the optional properties are used:
+
+ - s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+ the possible 8 options selectable by the dvs gpios. The value of this
+ property should be between 0 and 7. If not specified or if out of range, the
+ default value of this property is set to 0.
+
+ - s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
+ for dvs. The format of the gpio specifier depends in the gpio controller.
+
+
+Names of regulators supported by S5M8767 device:
+ - LDOn
+ - valid values for n are 1 to 28
+ - Example: LDO1, LDO2, LDO28
+ - BUCKn
+ - valid values for n are 1 to 9.
+ - Example: BUCK1, BUCK2, BUCK9
+Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of device.
+
+
+Optional properties of the nodes under "regulators" sub-node:
+ - op_mode: describes the different operating modes of the LDO's with
+ power mode change in SOC. The different possible values are,
+ 0 - always off mode
+ 1 - on in normal mode
+ 2 - low power mode
+ 3 - suspend mode
+ - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
+ GPIO controlling this regulator
+ (enable/disable); This is valid only
+ for buck9.
+
+Example:
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+
+ s5m8767,pmic-buck2-uses-gpio-dvs;
+ s5m8767,pmic-buck3-uses-gpio-dvs;
+ s5m8767,pmic-buck4-uses-gpio-dvs;
+
+ s5m8767,pmic-buck-default-dvs-idx = <0>;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
+ <&gpx0 1 0>, /* DVS2 */
+ <&gpx0 2 0>; /* DVS3 */
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
+ <&gpx2 4 0>, /* SET2 */
+ <&gpx2 5 0>; /* SET3 */
+
+ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ABB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>; /* Normal Mode */
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_ALIVE_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_MIF_1.2V";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vemmc_reg: BUCK9 {
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <3>; /* Standby Mode */
+ s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
+ };
+ };
+ };
diff --git a/dts/Bindings/regulator/tps65217.txt b/dts/Bindings/regulator/tps65217.txt
index 4f05d20..d181096 100644
--- a/dts/Bindings/regulator/tps65217.txt
+++ b/dts/Bindings/regulator/tps65217.txt
@@ -26,7 +26,11 @@ Example:
ti,pmic-shutdown-controller;
regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dcdc1_reg: dcdc1 {
+ reg = <0>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -34,6 +38,7 @@ Example:
};
dcdc2_reg: dcdc2 {
+ reg = <1>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -41,6 +46,7 @@ Example:
};
dcdc3_reg: dcc3 {
+ reg = <2>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
@@ -48,6 +54,7 @@ Example:
};
ldo1_reg: ldo1 {
+ reg = <3>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -55,6 +62,7 @@ Example:
};
ldo2_reg: ldo2 {
+ reg = <4>;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -62,6 +70,7 @@ Example:
};
ldo3_reg: ldo3 {
+ reg = <5>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -69,6 +78,7 @@ Example:
};
ldo4_reg: ldo4 {
+ reg = <6>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
diff --git a/dts/Bindings/reset/hisilicon,hi6220-reset.txt b/dts/Bindings/reset/hisilicon,hi6220-reset.txt
new file mode 100644
index 0000000..e0b185a
--- /dev/null
+++ b/dts/Bindings/reset/hisilicon,hi6220-reset.txt
@@ -0,0 +1,34 @@
+Hisilicon System Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+The reset controller registers are part of the system-ctl block on
+hi6220 SoC.
+
+Required properties:
+- compatible: may be "hisilicon,hi6220-sysctrl"
+- reg: should be register base and length as documented in the
+ datasheet
+- #reset-cells: 1, see below
+
+Example:
+sys_ctrl: sys_ctrl@f7030000 {
+ compatible = "hisilicon,hi6220-sysctrl", "syscon";
+ reg = <0x0 0xf7030000 0x0 0x2000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+example:
+
+ uart1: serial@..... {
+ ...
+ resets = <&sys_ctrl PERIPH_RSTEN3_UART1>;
+ ...
+ };
+
+The index could be found in <dt-bindings/reset/hisi,hi6220-resets.h>.
diff --git a/dts/Bindings/scsi/hisilicon-sas.txt b/dts/Bindings/scsi/hisilicon-sas.txt
new file mode 100644
index 0000000..f67e761
--- /dev/null
+++ b/dts/Bindings/scsi/hisilicon-sas.txt
@@ -0,0 +1,69 @@
+* HiSilicon SAS controller
+
+The HiSilicon SAS controller supports SAS/SATA.
+
+Main node required properties:
+ - compatible : value should be as follows:
+ (a) "hisilicon,hip05-sas-v1" for v1 hw in hip05 chipset
+ - sas-addr : array of 8 bytes for host SAS address
+ - reg : Address and length of the SAS register
+ - hisilicon,sas-syscon: phandle of syscon used for sas control
+ - ctrl-reset-reg : offset to controller reset register in ctrl reg
+ - ctrl-reset-sts-reg : offset to controller reset status register in ctrl reg
+ - ctrl-clock-ena-reg : offset to controller clock enable register in ctrl reg
+ - queue-count : number of delivery and completion queues in the controller
+ - phy-count : number of phys accessible by the controller
+ - interrupts : Interrupts for phys, completion queues, and fatal
+ sources; the interrupts are ordered in 3 groups, as follows:
+ - Phy interrupts
+ - Completion queue interrupts
+ - Fatal interrupts
+ Phy interrupts : Each phy has 3 interrupt sources:
+ - broadcast
+ - phyup
+ - abnormal
+ The phy interrupts are ordered into groups of 3 per phy
+ (broadcast, phyup, and abnormal) in increasing order.
+ Completion queue interrupts : each completion queue has 1
+ interrupt source.
+ The interrupts are ordered in increasing order.
+ Fatal interrupts : the fatal interrupts are ordered as follows:
+ - ECC
+ - AXI bus
+
+Example:
+ sas0: sas@c1000000 {
+ compatible = "hisilicon,hip05-sas-v1";
+ sas-addr = [50 01 88 20 16 00 00 0a];
+ reg = <0x0 0xc1000000 0x0 0x10000>;
+ hisilicon,sas-syscon = <&pcie_sas>;
+ ctrl-reset-reg = <0xa60>;
+ ctrl-reset-sts-reg = <0x5a30>;
+ ctrl-clock-ena-reg = <0x338>;
+ queue-count = <32>;
+ phy-count = <8>;
+ dma-coherent;
+ interrupt-parent = <&mbigen_dsa>;
+ interrupts = <259 4>,<263 4>,<264 4>,/* phy0 */
+ <269 4>,<273 4>,<274 4>,/* phy1 */
+ <279 4>,<283 4>,<284 4>,/* phy2 */
+ <289 4>,<293 4>,<294 4>,/* phy3 */
+ <299 4>,<303 4>,<304 4>,/* phy4 */
+ <309 4>,<313 4>,<314 4>,/* phy5 */
+ <319 4>,<323 4>,<324 4>,/* phy6 */
+ <329 4>,<333 4>,<334 4>,/* phy7 */
+ <336 1>,<337 1>,<338 1>,/* cq0-2 */
+ <339 1>,<340 1>,<341 1>,/* cq3-5 */
+ <342 1>,<343 1>,<344 1>,/* cq6-8 */
+ <345 1>,<346 1>,<347 1>,/* cq9-11 */
+ <348 1>,<349 1>,<350 1>,/* cq12-14 */
+ <351 1>,<352 1>,<353 1>,/* cq15-17 */
+ <354 1>,<355 1>,<356 1>,/* cq18-20 */
+ <357 1>,<358 1>,<359 1>,/* cq21-23 */
+ <360 1>,<361 1>,<362 1>,/* cq24-26 */
+ <363 1>,<364 1>,<365 1>,/* cq27-29 */
+ <366 1>,<367 1>/* cq30-31 */
+ <376 4>,/* fatal ecc */
+ <381 4>;/* fatal axi */
+ status = "disabled";
+ };
diff --git a/dts/Bindings/serial/8250.txt b/dts/Bindings/serial/8250.txt
index 91d5ab0..936ab5b 100644
--- a/dts/Bindings/serial/8250.txt
+++ b/dts/Bindings/serial/8250.txt
@@ -14,7 +14,6 @@ Required properties:
tegra132, or tegra210.
- "nxp,lpc3220-uart"
- "ralink,rt2880-uart"
- - "ibm,qpace-nwp-serial"
- "altr,16550-FIFO32"
- "altr,16550-FIFO64"
- "altr,16550-FIFO128"
diff --git a/dts/Bindings/serial/mtk-uart.txt b/dts/Bindings/serial/mtk-uart.txt
index 2d47add..a833a01 100644
--- a/dts/Bindings/serial/mtk-uart.txt
+++ b/dts/Bindings/serial/mtk-uart.txt
@@ -2,15 +2,15 @@
Required properties:
- compatible should contain:
- * "mediatek,mt8135-uart" for MT8135 compatible UARTS
+ * "mediatek,mt2701-uart" for MT2701 compatible UARTS
+ * "mediatek,mt6580-uart" for MT6580 compatible UARTS
+ * "mediatek,mt6582-uart" for MT6582 compatible UARTS
+ * "mediatek,mt6589-uart" for MT6589 compatible UARTS
+ * "mediatek,mt6795-uart" for MT6795 compatible UARTS
* "mediatek,mt8127-uart" for MT8127 compatible UARTS
+ * "mediatek,mt8135-uart" for MT8135 compatible UARTS
* "mediatek,mt8173-uart" for MT8173 compatible UARTS
- * "mediatek,mt6795-uart" for MT6795 compatible UARTS
- * "mediatek,mt6589-uart" for MT6589 compatible UARTS
- * "mediatek,mt6582-uart" for MT6582 compatible UARTS
- * "mediatek,mt6580-uart" for MT6580 compatible UARTS
- * "mediatek,mt6577-uart" for all compatible UARTS (MT8173, MT6795,
- MT6589, MT6582, MT6580, MT6577)
+ * "mediatek,mt6577-uart" for MT6577 and all of the above
- reg: The base address of the UART register bank.
diff --git a/dts/Bindings/serial/renesas,sci-serial.txt b/dts/Bindings/serial/renesas,sci-serial.txt
index 73f825e..401b1b3 100644
--- a/dts/Bindings/serial/renesas,sci-serial.txt
+++ b/dts/Bindings/serial/renesas,sci-serial.txt
@@ -2,7 +2,7 @@
Required properties:
- - compatible: Must contain one of the following:
+ - compatible: Must contain one or more of the following:
- "renesas,scif-r7s72100" for R7S72100 (RZ/A1H) SCIF compatible UART.
- "renesas,scifa-r8a73a4" for R8A73A4 (R-Mobile APE6) SCIFA compatible UART.
@@ -15,10 +15,14 @@ Required properties:
- "renesas,scifa-r8a7790" for R8A7790 (R-Car H2) SCIFA compatible UART.
- "renesas,scifb-r8a7790" for R8A7790 (R-Car H2) SCIFB compatible UART.
- "renesas,hscif-r8a7790" for R8A7790 (R-Car H2) HSCIF compatible UART.
- - "renesas,scif-r8a7791" for R8A7791 (R-Car M2) SCIF compatible UART.
- - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2) SCIFA compatible UART.
- - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2) SCIFB compatible UART.
- - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2) HSCIF compatible UART.
+ - "renesas,scif-r8a7791" for R8A7791 (R-Car M2-W) SCIF compatible UART.
+ - "renesas,scifa-r8a7791" for R8A7791 (R-Car M2-W) SCIFA compatible UART.
+ - "renesas,scifb-r8a7791" for R8A7791 (R-Car M2-W) SCIFB compatible UART.
+ - "renesas,hscif-r8a7791" for R8A7791 (R-Car M2-W) HSCIF compatible UART.
+ - "renesas,scif-r8a7793" for R8A7793 (R-Car M2-N) SCIF compatible UART.
+ - "renesas,scifa-r8a7793" for R8A7793 (R-Car M2-N) SCIFA compatible UART.
+ - "renesas,scifb-r8a7793" for R8A7793 (R-Car M2-N) SCIFB compatible UART.
+ - "renesas,hscif-r8a7793" for R8A7793 (R-Car M2-N) HSCIF compatible UART.
- "renesas,scif-r8a7794" for R8A7794 (R-Car E2) SCIF compatible UART.
- "renesas,scifa-r8a7794" for R8A7794 (R-Car E2) SCIFA compatible UART.
- "renesas,scifb-r8a7794" for R8A7794 (R-Car E2) SCIFB compatible UART.
@@ -27,6 +31,14 @@ Required properties:
- "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
- "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
- "renesas,scifb-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFB compatible UART.
+ - "renesas,rcar-gen1-scif" for R-Car Gen1 SCIF compatible UART,
+ - "renesas,rcar-gen2-scif" for R-Car Gen2 SCIF compatible UART,
+ - "renesas,rcar-gen3-scif" for R-Car Gen3 SCIF compatible UART,
+ - "renesas,rcar-gen2-scifa" for R-Car Gen2 SCIFA compatible UART,
+ - "renesas,rcar-gen2-scifb" for R-Car Gen2 SCIFB compatible UART,
+ - "renesas,rcar-gen1-hscif" for R-Car Gen1 HSCIF compatible UART,
+ - "renesas,rcar-gen2-hscif" for R-Car Gen2 HSCIF compatible UART,
+ - "renesas,rcar-gen3-hscif" for R-Car Gen3 HSCIF compatible UART,
- "renesas,scif" for generic SCIF compatible UART.
- "renesas,scifa" for generic SCIFA compatible UART.
- "renesas,scifb" for generic SCIFB compatible UART.
@@ -34,15 +46,26 @@ Required properties:
- "renesas,sci" for generic SCI compatible UART.
When compatible with the generic version, nodes must list the
- SoC-specific version corresponding to the platform first followed by the
- generic version.
+ SoC-specific version corresponding to the platform first, followed by the
+ family-specific and/or generic versions.
- reg: Base address and length of the I/O registers used by the UART.
- interrupts: Must contain an interrupt-specifier for the SCIx interrupt.
- clocks: Must contain a phandle and clock-specifier pair for each entry
in clock-names.
- - clock-names: Must contain "sci_ick" for the SCIx UART interface clock.
+ - clock-names: Must contain "fck" for the SCIx UART functional clock.
+ Apart from the divided functional clock, there may be other possible
+ sources for the sampling clock, depending on SCIx variant.
+ On (H)SCI(F) and some SCIFA, an additional clock may be specified:
+ - "hsck" for the optional external clock input (on HSCIF),
+ - "sck" for the optional external clock input (on other variants).
+ On UARTs equipped with a Baud Rate Generator for External Clock (BRG)
+ (some SCIF and HSCIF), additional clocks may be specified:
+ - "brg_int" for the optional internal clock source for the frequency
+ divider (typically the (AXI or SHwy) bus clock),
+ - "scif_clk" for the optional external clock source for the frequency
+ divider (SCIF_CLK).
Note: Each enabled SCIx UART should have an alias correctly numbered in the
"aliases" node.
@@ -58,12 +81,13 @@ Example:
};
scifa0: serial@e6c40000 {
- compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+ compatible = "renesas,scifa-r8a7790",
+ "renesas,rcar-gen2-scifa", "renesas,scifa";
reg = <0 0xe6c40000 0 64>;
interrupt-parent = <&gic>;
interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
};
diff --git a/dts/Bindings/soc/bcm/raspberrypi,bcm2835-power.txt b/dts/Bindings/soc/bcm/raspberrypi,bcm2835-power.txt
new file mode 100644
index 0000000..30942cf
--- /dev/null
+++ b/dts/Bindings/soc/bcm/raspberrypi,bcm2835-power.txt
@@ -0,0 +1,47 @@
+Raspberry Pi power domain driver
+
+Required properties:
+
+- compatible: Should be "raspberrypi,bcm2835-power".
+- firmware: Reference to the RPi firmware device node.
+- #power-domain-cells: Should be <1>, we providing multiple power domains.
+
+The valid defines for power domain are:
+
+ RPI_POWER_DOMAIN_I2C0
+ RPI_POWER_DOMAIN_I2C1
+ RPI_POWER_DOMAIN_I2C2
+ RPI_POWER_DOMAIN_VIDEO_SCALER
+ RPI_POWER_DOMAIN_VPU1
+ RPI_POWER_DOMAIN_HDMI
+ RPI_POWER_DOMAIN_USB
+ RPI_POWER_DOMAIN_VEC
+ RPI_POWER_DOMAIN_JPEG
+ RPI_POWER_DOMAIN_H264
+ RPI_POWER_DOMAIN_V3D
+ RPI_POWER_DOMAIN_ISP
+ RPI_POWER_DOMAIN_UNICAM0
+ RPI_POWER_DOMAIN_UNICAM1
+ RPI_POWER_DOMAIN_CCP2RX
+ RPI_POWER_DOMAIN_CSI2
+ RPI_POWER_DOMAIN_CPI
+ RPI_POWER_DOMAIN_DSI0
+ RPI_POWER_DOMAIN_DSI1
+ RPI_POWER_DOMAIN_TRANSPOSER
+ RPI_POWER_DOMAIN_CCP2TX
+ RPI_POWER_DOMAIN_CDP
+ RPI_POWER_DOMAIN_ARM
+
+Example:
+
+power: power {
+ compatible = "raspberrypi,bcm2835-power";
+ firmware = <&firmware>;
+ #power-domain-cells = <1>;
+};
+
+Example for using power domain:
+
+&usb {
+ power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
diff --git a/dts/Bindings/soc/dove/pmu.txt b/dts/Bindings/soc/dove/pmu.txt
new file mode 100644
index 0000000..edd40b7
--- /dev/null
+++ b/dts/Bindings/soc/dove/pmu.txt
@@ -0,0 +1,56 @@
+Device Tree bindings for Marvell PMU
+
+Required properties:
+ - compatible: value should be "marvell,dove-pmu".
+ May also include "simple-bus" if there are child devices, in which
+ case the ranges node is required.
+ - reg: two base addresses and sizes of the PM controller and PMU.
+ - interrupts: single interrupt number for the PMU interrupt
+ - interrupt-controller: must be specified as the PMU itself is an
+ interrupt controller.
+ - #interrupt-cells: must be 1.
+ - #reset-cells: must be 1.
+ - domains: sub-node containing domain descriptions
+
+Optional properties:
+ - ranges: defines the address mapping for child devices, as per the
+ standard property of this name. Required when compatible includes
+ "simple-bus".
+
+Power domain descriptions are listed as child nodes of the "domains"
+sub-node. Each domain has the following properties:
+
+Required properties:
+ - #power-domain-cells: must be 0.
+
+Optional properties:
+ - marvell,pmu_pwr_mask: specifies the mask value for PMU power register
+ - marvell,pmu_iso_mask: specifies the mask value for PMU isolation register
+ - resets: points to the reset manager (PMU node) and reset index.
+
+Example:
+
+ pmu: power-management@d0000 {
+ compatible = "marvell,dove-pmu";
+ reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
+ interrupts = <33>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ #reset-cells = <1>;
+
+ domains {
+ vpu_domain: vpu-domain {
+ #power-domain-cells = <0>;
+ marvell,pmu_pwr_mask = <0x00000008>;
+ marvell,pmu_iso_mask = <0x00000001>;
+ resets = <&pmu 16>;
+ };
+
+ gpu_domain: gpu-domain {
+ #power-domain-cells = <0>;
+ marvell,pmu_pwr_mask = <0x00000004>;
+ marvell,pmu_iso_mask = <0x00000002>;
+ resets = <&pmu 18>;
+ };
+ };
+ };
diff --git a/dts/Bindings/soc/mediatek/scpsys.txt b/dts/Bindings/soc/mediatek/scpsys.txt
index a6c8afc..e8f15e3 100644
--- a/dts/Bindings/soc/mediatek/scpsys.txt
+++ b/dts/Bindings/soc/mediatek/scpsys.txt
@@ -21,6 +21,18 @@ Required properties:
These are the clocks which hardware needs to be enabled
before enabling certain power domains.
+Optional properties:
+- vdec-supply: Power supply for the vdec power domain
+- venc-supply: Power supply for the venc power domain
+- isp-supply: Power supply for the isp power domain
+- mm-supply: Power supply for the mm power domain
+- venc_lt-supply: Power supply for the venc_lt power domain
+- audio-supply: Power supply for the audio power domain
+- usb-supply: Power supply for the usb power domain
+- mfg_async-supply: Power supply for the mfg_async power domain
+- mfg_2d-supply: Power supply for the mfg_2d power domain
+- mfg-supply: Power supply for the mfg power domain
+
Example:
scpsys: scpsys@10006000 {
diff --git a/dts/Bindings/soc/qcom/qcom,smd-rpm.txt b/dts/Bindings/soc/qcom/qcom,smd-rpm.txt
new file mode 100644
index 0000000..a48049c
--- /dev/null
+++ b/dts/Bindings/soc/qcom/qcom,smd-rpm.txt
@@ -0,0 +1,58 @@
+Qualcomm Resource Power Manager (RPM) over SMD
+
+This driver is used to interface with the Resource Power Manager (RPM) found in
+various Qualcomm platforms. The RPM allows each component in the system to vote
+for state of the system resources, such as clocks, regulators and bus
+frequencies.
+
+The SMD information for the RPM edge should be filled out. See qcom,smd.txt for
+the required edge properties. All SMD related properties will reside within the
+RPM node itself.
+
+= SUBDEVICES
+
+The RPM exposes resources to its subnodes. The rpm_requests node must be
+present and this subnode may contain children that designate regulator
+resources.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,rpm-apq8084"
+ "qcom,rpm-msm8916"
+ "qcom,rpm-msm8974"
+
+- qcom,smd-channels:
+ Usage: required
+ Value type: <string>
+ Definition: must be "rpm_requests"
+
+Refer to Documentation/devicetree/bindings/regulator/qcom,smd-rpm-regulator.txt
+for information on the regulator subnodes that can exist under the rpm_requests.
+
+Example:
+
+ soc {
+ apcs: syscon@f9011000 {
+ compatible = "syscon";
+ reg = <0xf9011000 0x1000>;
+ };
+ };
+
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <0 168 1>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests {
+ compatible = "qcom,rpm-msm8974";
+ qcom,smd-channels = "rpm_requests";
+
+ ...
+ };
+ };
+ };
diff --git a/dts/Bindings/soc/qcom/qcom,smp2p.txt b/dts/Bindings/soc/qcom/qcom,smp2p.txt
new file mode 100644
index 0000000..5cc82b8
--- /dev/null
+++ b/dts/Bindings/soc/qcom/qcom,smp2p.txt
@@ -0,0 +1,104 @@
+Qualcomm Shared Memory Point 2 Point binding
+
+The Shared Memory Point to Point (SMP2P) protocol facilitates communication of
+a single 32-bit value between two processors. Each value has a single writer
+(the local side) and a single reader (the remote side). Values are uniquely
+identified in the system by the directed edge (local processor ID to remote
+processor ID) and a string identifier.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,smp2p"
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: one entry specifying the smp2p notification interrupt
+
+- qcom,ipc:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the outgoing ipc bit used for
+ signaling the remote end of the smp2p edge:
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+- qcom,smem:
+ Usage: required
+ Value type: <u32 array>
+ Definition: two identifiers of the inbound and outbound smem items used
+ for this edge
+
+- qcom,local-pid:
+ Usage: required
+ Value type: <u32>
+ Definition: specifies the identfier of the local endpoint of this edge
+
+- qcom,remote-pid:
+ Usage: required
+ Value type: <u32>
+ Definition: specifies the identfier of the remote endpoint of this edge
+
+= SUBNODES
+Each SMP2P pair contain a set of inbound and outbound entries, these are
+described in subnodes of the smp2p device node. The node names are not
+important.
+
+- qcom,entry-name:
+ Usage: required
+ Value type: <string>
+ Definition: specifies the name of this entry, for inbound entries this
+ will be used to match against the remotely allocated entry
+ and for outbound entries this name is used for allocating
+ entries
+
+- interrupt-controller:
+ Usage: required for incoming entries
+ Value type: <empty>
+ Definition: marks the entry as inbound; the node should be specified
+ as a two cell interrupt-controller as defined in
+ "../interrupt-controller/interrupts.txt"
+ If not specified this node will denote the outgoing entry
+
+- #interrupt-cells:
+ Usage: required for incoming entries
+ Value type: <u32>
+ Definition: must be 2 - denoting the bit in the entry and IRQ flags
+
+- #qcom,state-cells:
+ Usage: required for outgoing entries
+ Value type: <u32>
+ Definition: must be 1 - denoting the bit in the entry
+
+= EXAMPLE
+The following example shows the SMP2P setup with the wireless processor,
+defined from the 8974 apps processor's point-of-view. It encompasses one
+inbound and one outbound entry:
+
+wcnss-smp2p {
+ compatible = "qcom,smp2p";
+ qcom,smem = <431>, <451>;
+
+ interrupts = <0 143 1>;
+
+ qcom,ipc = <&apcs 8 18>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <4>;
+
+ wcnss_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+
+ #qcom,state-cells = <1>;
+ };
+
+ wcnss_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
diff --git a/dts/Bindings/soc/qcom/qcom,smsm.txt b/dts/Bindings/soc/qcom/qcom,smsm.txt
new file mode 100644
index 0000000..a6634c7
--- /dev/null
+++ b/dts/Bindings/soc/qcom/qcom,smsm.txt
@@ -0,0 +1,104 @@
+Qualcomm Shared Memory State Machine
+
+The Shared Memory State Machine facilitates broadcasting of single bit state
+information between the processors in a Qualcomm SoC. Each processor is
+assigned 32 bits of state that can be modified. A processor can through a
+matrix of bitmaps signal subscription of notifications upon changes to a
+certain bit owned by a certain remote processor.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,smsm"
+
+- qcom,ipc-N:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: three entries specifying the outgoing ipc bit used for
+ signaling the N:th remote processor
+ - phandle to a syscon node representing the apcs registers
+ - u32 representing offset to the register within the syscon
+ - u32 representing the ipc bit within the register
+
+- qcom,local-host:
+ Usage: optional
+ Value type: <u32>
+ Definition: identifier of the local processor in the list of hosts, or
+ in other words specifier of the column in the subscription
+ matrix representing the local processor
+ defaults to host 0
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 1
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: must be 0
+
+= SUBNODES
+Each processor's state bits are described by a subnode of the smsm device node.
+Nodes can either be flagged as an interrupt-controller to denote a remote
+processor's state bits or the local processors bits. The node names are not
+important.
+
+- reg:
+ Usage: required
+ Value type: <u32>
+ Definition: specifies the offset, in words, of the first bit for this
+ entry
+
+- #qcom,state-cells:
+ Usage: required for local entry
+ Value type: <u32>
+ Definition: must be 1 - denotes bit number
+
+- interrupt-controller:
+ Usage: required for remote entries
+ Value type: <empty>
+ Definition: marks the entry as a interrupt-controller and the state bits
+ to belong to a remote processor
+
+- #interrupt-cells:
+ Usage: required for remote entries
+ Value type: <u32>
+ Definition: must be 2 - denotes bit number and IRQ flags
+
+- interrupts:
+ Usage: required for remote entries
+ Value type: <prop-encoded-array>
+ Definition: one entry specifying remote IRQ used by the remote processor
+ to signal changes of its state bits
+
+
+= EXAMPLE
+The following example shows the SMEM setup for controlling properties of the
+wireless processor, defined from the 8974 apps processor's point-of-view. It
+encompasses one outbound entry and the outgoing interrupt for the wireless
+processor.
+
+smsm {
+ compatible = "qcom,smsm";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ qcom,ipc-3 = <&apcs 8 19>;
+
+ apps_smsm: apps@0 {
+ reg = <0>;
+
+ #qcom,state-cells = <1>;
+ };
+
+ wcnss_smsm: wcnss@7 {
+ reg = <7>;
+ interrupts = <0 144 1>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+};
diff --git a/dts/Bindings/soc/ti/wkup_m3_ipc.txt b/dts/Bindings/soc/ti/wkup_m3_ipc.txt
new file mode 100644
index 0000000..4015504
--- /dev/null
+++ b/dts/Bindings/soc/ti/wkup_m3_ipc.txt
@@ -0,0 +1,57 @@
+Wakeup M3 IPC Driver
+=====================
+
+The TI AM33xx and AM43xx family of devices use a small Cortex M3 co-processor
+(commonly referred to as Wakeup M3 or CM3) to help with various low power tasks
+that cannot be controlled from the MPU, like suspend/resume and certain deep
+C-states for CPU Idle. Once the wkup_m3_ipc driver uses the wkup_m3_rproc driver
+to boot the wkup_m3, it handles communication with the CM3 using IPC registers
+present in the SoC's control module and a mailbox. The wkup_m3_ipc exposes an
+API to allow the SoC PM code to execute specific PM tasks.
+
+Wkup M3 Device Node:
+====================
+A wkup_m3_ipc device node is used to represent the IPC registers within an
+SoC.
+
+Required properties:
+--------------------
+- compatible: Should be,
+ "ti,am3352-wkup-m3-ipc" for AM33xx SoCs
+ "ti,am4372-wkup-m3-ipc" for AM43xx SoCs
+- reg: Contains the IPC register address space to communicate
+ with the Wakeup M3 processor
+- interrupts: Contains the interrupt information for the wkup_m3
+ interrupt that signals the MPU.
+- ti,rproc: phandle to the wkup_m3 rproc node so the IPC driver
+ can boot it.
+- mboxes: phandles used by IPC framework to get correct mbox
+ channel for communication. Must point to appropriate
+ mbox_wkupm3 child node.
+
+Example:
+--------
+/* AM33xx */
+ l4_wkup: l4_wkup@44c00000 {
+ ...
+
+ scm: scm@210000 {
+ compatible = "ti,am3-scm", "simple-bus";
+ reg = <0x210000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x210000 0x2000>;
+
+ ...
+
+ wkup_m3_ipc: wkup_m3_ipc@1324 {
+ compatible = "ti,am3352-wkup-m3-ipc";
+ reg = <0x1324 0x24>;
+ interrupts = <78>;
+ ti,rproc = <&wkup_m3>;
+ mboxes = <&mailbox &mbox_wkupm3>;
+ };
+
+ ...
+ };
+ };
diff --git a/dts/Bindings/sound/ak4613.txt b/dts/Bindings/sound/ak4613.txt
index 15a9195..1783f9e 100644
--- a/dts/Bindings/sound/ak4613.txt
+++ b/dts/Bindings/sound/ak4613.txt
@@ -7,6 +7,16 @@ Required properties:
- compatible : "asahi-kasei,ak4613"
- reg : The chip select number on the I2C bus
+Optional properties:
+- asahi-kasei,in1-single-end : Boolean. Indicate input / output pins are single-ended.
+- asahi-kasei,in2-single-end rather than differential.
+- asahi-kasei,out1-single-end
+- asahi-kasei,out2-single-end
+- asahi-kasei,out3-single-end
+- asahi-kasei,out4-single-end
+- asahi-kasei,out5-single-end
+- asahi-kasei,out6-single-end
+
Example:
&i2c {
diff --git a/dts/Bindings/sound/atmel-classd.txt b/dts/Bindings/sound/atmel-classd.txt
index 0018451..549e701 100644
--- a/dts/Bindings/sound/atmel-classd.txt
+++ b/dts/Bindings/sound/atmel-classd.txt
@@ -16,6 +16,10 @@ Required properties:
Required elements: "pclk", "gclk" and "aclk".
- clocks
Please refer to clock-bindings.txt.
+- assigned-clocks
+ Should be <&classd_gclk>.
+- assigned-clock-parents
+ Should be <&audio_pll_pmc>.
Optional properties:
- pinctrl-names, pinctrl-0
@@ -43,6 +47,8 @@ classd: classd@fc048000 {
dma-names = "tx";
clocks = <&classd_clk>, <&classd_gclk>, <&audio_pll_pmc>;
clock-names = "pclk", "gclk", "aclk";
+ assigned-clocks = <&classd_gclk>;
+ assigned-clock-parents = <&audio_pll_pmc>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_classd_default>;
diff --git a/dts/Bindings/sound/atmel-pdmic.txt b/dts/Bindings/sound/atmel-pdmic.txt
new file mode 100644
index 0000000..e0875f1
--- /dev/null
+++ b/dts/Bindings/sound/atmel-pdmic.txt
@@ -0,0 +1,55 @@
+* Atmel PDMIC driver under ALSA SoC architecture
+
+Required properties:
+- compatible
+ Should be "atmel,sama5d2-pdmic".
+- reg
+ Should contain PDMIC registers location and length.
+- interrupts
+ Should contain the IRQ line for the PDMIC.
+- dmas
+ One DMA specifiers as described in atmel-dma.txt and dma.txt files.
+- dma-names
+ Must be "rx".
+- clock-names
+ Required elements:
+ - "pclk" peripheral clock
+ - "gclk" generated clock
+- clocks
+ Must contain an entry for each required entry in clock-names.
+ Please refer to clock-bindings.txt.
+- atmel,mic-min-freq
+ The minimal frequency that the micphone supports.
+- atmel,mic-max-freq
+ The maximal frequency that the micphone supports.
+
+Optional properties:
+- pinctrl-names, pinctrl-0
+ Please refer to pinctrl-bindings.txt.
+- atmel,model
+ The user-visible name of this sound card.
+ The default value is "PDMIC".
+- atmel,mic-offset
+ The offset that should be added.
+ The range is from -32768 to 32767.
+ The default value is 0.
+
+Example:
+ pdmic@f8018000 {
+ compatible = "atmel,sama5d2-pdmic";
+ reg = <0xf8018000 0x124>;
+ interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+ | AT91_XDMAC_DT_PERID(50))>;
+ dma-names = "rx";
+ clocks = <&pdmic_clk>, <&pdmic_gclk>;
+ clock-names = "pclk", "gclk";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pdmic_default>;
+ atmel,model = "PDMIC @ sama5d2_xplained";
+ atmel,mic-min-freq = <1000000>;
+ atmel,mic-max-freq = <3246000>;
+ atmel,mic-offset = <0x0>;
+ };
diff --git a/dts/Bindings/sound/da7218.txt b/dts/Bindings/sound/da7218.txt
new file mode 100644
index 0000000..5ca5a70
--- /dev/null
+++ b/dts/Bindings/sound/da7218.txt
@@ -0,0 +1,104 @@
+Dialog Semiconductor DA7218 Audio Codec bindings
+
+DA7218 is an audio codec with HP detect feature.
+
+======
+
+Required properties:
+- compatible : Should be "dlg,da7217" or "dlg,da7218"
+- reg: Specifies the I2C slave address
+
+- VDD-supply: VDD power supply for the device
+- VDDMIC-supply: VDDMIC power supply for the device
+- VDDIO-supply: VDDIO power supply for the device
+ (See Documentation/devicetree/bindings/regulator/regulator.txt for further
+ information relating to regulators)
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+ the IRQs from DA7218 are delivered to.
+- interrupts: IRQ line info for DA7218 chip.
+ (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
+ further information relating to interrupt properties)
+- interrupt-names : Name associated with interrupt line. Should be "wakeup" if
+ interrupt is to be used to wake system, otherwise "irq" should be used.
+- wakeup-source: Flag to indicate this device can wake system (suspend/resume).
+
+- clocks : phandle and clock specifier for codec MCLK.
+- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
+
+- dlg,micbias1-lvl-millivolt : Voltage (mV) for Mic Bias 1
+ [<1200>, <1600>, <1800>, <2000>, <2200>, <2400>, <2600>, <2800>, <3000>]
+- dlg,micbias2-lvl-millivolt : Voltage (mV) for Mic Bias 2
+ [<1200>, <1600>, <1800>, <2000>, <2200>, <2400>, <2600>, <2800>, <3000>]
+- dlg,mic1-amp-in-sel : Mic1 input source type
+ ["diff", "se_p", "se_n"]
+- dlg,mic2-amp-in-sel : Mic2 input source type
+ ["diff", "se_p", "se_n"]
+- dlg,dmic1-data-sel : DMIC1 channel select based on clock edge.
+ ["lrise_rfall", "lfall_rrise"]
+- dlg,dmic1-samplephase : When to sample audio from DMIC1.
+ ["on_clkedge", "between_clkedge"]
+- dlg,dmic1-clkrate-hz : DMic1 clock frequency (Hz).
+ [<1500000>, <3000000>]
+- dlg,dmic2-data-sel : DMic2 channel select based on clock edge.
+ ["lrise_rfall", "lfall_rrise"]
+- dlg,dmic2-samplephase : When to sample audio from DMic2.
+ ["on_clkedge", "between_clkedge"]
+- dlg,dmic2-clkrate-hz : DMic2 clock frequency (Hz).
+ [<1500000>, <3000000>]
+- dlg,hp-diff-single-supply : Boolean flag, use single supply for HP
+ (DA7217 only)
+
+======
+
+Optional Child node - 'da7218_hpldet' (DA7218 only):
+
+Optional properties:
+- dlg,jack-rate-us : Time between jack detect measurements (us)
+ [<5>, <10>, <20>, <40>, <80>, <160>, <320>, <640>]
+- dlg,jack-debounce : Number of debounce measurements taken for jack detect
+ [<0>, <2>, <3>, <4>]
+- dlg,jack-threshold-pct : Threshold level for jack detection (% of VDD)
+ [<84>, <88>, <92>, <96>]
+- dlg,comp-inv : Boolean flag, invert comparator output
+- dlg,hyst : Boolean flag, enable hysteresis
+- dlg,discharge : Boolean flag, auto discharge of Mic Bias on jack removal
+
+======
+
+Example:
+
+ codec: da7218@1a {
+ compatible = "dlg,da7218";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ wakeup-source;
+
+ VDD-supply = <&reg_audio>;
+ VDDMIC-supply = <&reg_audio>;
+ VDDIO-supply = <&reg_audio>;
+
+ clocks = <&clks 201>;
+ clock-names = "mclk";
+
+ dlg,micbias1-lvl-millivolt = <2600>;
+ dlg,micbias2-lvl-millivolt = <2600>;
+ dlg,mic1-amp-in-sel = "diff";
+ dlg,mic2-amp-in-sel = "diff";
+
+ dlg,dmic1-data-sel = "lrise_rfall";
+ dlg,dmic1-samplephase = "on_clkedge";
+ dlg,dmic1-clkrate-hz = <3000000>;
+ dlg,dmic2-data-sel = "lrise_rfall";
+ dlg,dmic2-samplephase = "on_clkedge";
+ dlg,dmic2-clkrate-hz = <3000000>;
+
+ da7218_hpldet {
+ dlg,jack-rate-us = <40>;
+ dlg,jack-debounce = <2>;
+ dlg,jack-threshold-pct = <84>;
+ dlg,hyst;
+ };
+ };
diff --git a/dts/Bindings/sound/da7219.txt b/dts/Bindings/sound/da7219.txt
index 1b70309..cf61681 100644
--- a/dts/Bindings/sound/da7219.txt
+++ b/dts/Bindings/sound/da7219.txt
@@ -28,13 +28,15 @@ Optional properties:
- clocks : phandle and clock specifier for codec MCLK.
- clock-names : Clock name string for 'clocks' attribute, should be "mclk".
-- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine
- [<1050>, <1100>, <1200>, <1400>]
- dlg,micbias-lvl : Voltage (mV) for Mic Bias
- [<1800>, <2000>, <2200>, <2400>, <2600>]
+ [<1600>, <1800>, <2000>, <2200>, <2400>, <2600>]
- dlg,mic-amp-in-sel : Mic input source type
["diff", "se_p", "se_n"]
+Deprecated properties:
+- dlg,ldo-lvl : Required internal LDO voltage (mV) level for digital engine
+ (LDO unavailable in production HW so property no longer required).
+
======
Child node - 'da7219_aad':
diff --git a/dts/Bindings/sound/fsl,asrc.txt b/dts/Bindings/sound/fsl,asrc.txt
index b93362a..3e26a94 100644
--- a/dts/Bindings/sound/fsl,asrc.txt
+++ b/dts/Bindings/sound/fsl,asrc.txt
@@ -25,6 +25,11 @@ Required properties:
"mem" Peripheral access clock to access registers.
"ipg" Peripheral clock to driver module.
"asrck_<0-f>" Clock sources for input and output clock.
+ "spba" The spba clock is required when ASRC is placed as a
+ bus slave of the Shared Peripheral Bus and when two
+ or more bus masters (CPU, DMA or DSP) try to access
+ it. This property is optional depending on the SoC
+ design.
- big-endian : If this property is absent, the little endian mode
will be in use as default. Otherwise, the big endian
diff --git a/dts/Bindings/sound/fsl,esai.txt b/dts/Bindings/sound/fsl,esai.txt
index d3b6b5f..cd3ee5d 100644
--- a/dts/Bindings/sound/fsl,esai.txt
+++ b/dts/Bindings/sound/fsl,esai.txt
@@ -27,6 +27,11 @@ Required properties:
derive HCK, SCK and FS.
"fsys" The system clock derived from ahb clock used to
derive HCK, SCK and FS.
+ "spba" The spba clock is required when ESAI is placed as a
+ bus slave of the Shared Peripheral Bus and when two
+ or more bus masters (CPU, DMA or DSP) try to access
+ it. This property is optional depending on the SoC
+ design.
- fsl,fifo-depth : The number of elements in the transmit and receive
FIFOs. This number is the maximum allowed value for
diff --git a/dts/Bindings/sound/fsl,spdif.txt b/dts/Bindings/sound/fsl,spdif.txt
index b5ee32e..4ca39dd 100644
--- a/dts/Bindings/sound/fsl,spdif.txt
+++ b/dts/Bindings/sound/fsl,spdif.txt
@@ -27,6 +27,11 @@ Required properties:
Transceiver Clock Diagram" of SoC reference manual.
It can also be referred to TxClk_Source bit of
register SPDIF_STC.
+ "spba" The spba clock is required when SPDIF is placed as a
+ bus slave of the Shared Peripheral Bus and when two
+ or more bus masters (CPU, DMA or DSP) try to access
+ it. This property is optional depending on the SoC
+ design.
- big-endian : If this property is absent, the native endian mode
will be in use as default, or the big endian mode
diff --git a/dts/Bindings/sound/img,i2s-in.txt b/dts/Bindings/sound/img,i2s-in.txt
new file mode 100644
index 0000000..423265c
--- /dev/null
+++ b/dts/Bindings/sound/img,i2s-in.txt
@@ -0,0 +1,47 @@
+Imagination Technologies I2S Input Controller
+
+Required Properties:
+
+ - compatible : Compatible list, must contain "img,i2s-in"
+
+ - #sound-dai-cells : Must be equal to 0
+
+ - reg : Offset and length of the register set for the device
+
+ - clocks : Contains an entry for each entry in clock-names
+
+ - clock-names : Must include the following entry:
+ "sys" The system clock
+
+ - dmas: Contains an entry for each entry in dma-names.
+
+ - dma-names: Must include the following entry:
+ "rx" Single DMA channel used by all active I2S channels
+
+ - img,i2s-channels : Number of I2S channels instantiated in the I2S in block
+
+Optional Properties:
+
+ - interrupts : Contains the I2S in interrupts. Depending on
+ the configuration, there may be no interrupts, one interrupt,
+ or an interrupt per I2S channel. For the case where there is
+ one interrupt per channel, the interrupts should be listed
+ in ascending channel order
+
+ - resets: Contains a phandle to the I2S in reset signal
+
+ - reset-names: Contains the reset signal name "rst"
+
+Example:
+
+i2s_in: i2s-in@18100800 {
+ compatible = "img,i2s-in";
+ reg = <0x18100800 0x200>;
+ interrupts = <GIC_SHARED 7 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 30 0xffffffff 0>;
+ dma-names = "rx";
+ clocks = <&cr_periph SYS_CLK_I2S_IN>;
+ clock-names = "sys";
+ img,i2s-channels = <6>;
+ #sound-dai-cells = <0>;
+};
diff --git a/dts/Bindings/sound/img,i2s-out.txt b/dts/Bindings/sound/img,i2s-out.txt
new file mode 100644
index 0000000..0159415
--- /dev/null
+++ b/dts/Bindings/sound/img,i2s-out.txt
@@ -0,0 +1,51 @@
+Imagination Technologies I2S Output Controller
+
+Required Properties:
+
+ - compatible : Compatible list, must contain "img,i2s-out"
+
+ - #sound-dai-cells : Must be equal to 0
+
+ - reg : Offset and length of the register set for the device
+
+ - clocks : Contains an entry for each entry in clock-names
+
+ - clock-names : Must include the following entries:
+ "sys" The system clock
+ "ref" The reference clock
+
+ - dmas: Contains an entry for each entry in dma-names.
+
+ - dma-names: Must include the following entry:
+ "tx" Single DMA channel used by all active I2S channels
+
+ - img,i2s-channels : Number of I2S channels instantiated in the I2S out block
+
+ - resets: Contains a phandle to the I2S out reset signal
+
+ - reset-names: Contains the reset signal name "rst"
+
+Optional Properties:
+
+ - interrupts : Contains the I2S out interrupts. Depending on
+ the configuration, there may be no interrupts, one interrupt,
+ or an interrupt per I2S channel. For the case where there is
+ one interrupt per channel, the interrupts should be listed
+ in ascending channel order
+
+Example:
+
+i2s_out: i2s-out@18100A00 {
+ compatible = "img,i2s-out";
+ reg = <0x18100A00 0x200>;
+ interrupts = <GIC_SHARED 13 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 23 0xffffffff 0>;
+ dma-names = "tx";
+ clocks = <&cr_periph SYS_CLK_I2S_OUT>,
+ <&clk_core CLK_I2S>;
+ clock-names = "sys", "ref";
+ img,i2s-channels = <6>;
+ resets = <&pistachio_reset PISTACHIO_RESET_I2S_OUT>;
+ reset-names = "rst";
+ #sound-dai-cells = <0>;
+};
diff --git a/dts/Bindings/sound/img,parallel-out.txt b/dts/Bindings/sound/img,parallel-out.txt
new file mode 100644
index 0000000..a3015d2
--- /dev/null
+++ b/dts/Bindings/sound/img,parallel-out.txt
@@ -0,0 +1,44 @@
+Imagination Technologies Parallel Output Controller
+
+Required Properties:
+
+ - compatible : Compatible list, must contain "img,parallel-out".
+
+ - #sound-dai-cells : Must be equal to 0
+
+ - reg : Offset and length of the register set for the device.
+
+ - dmas: Contains an entry for each entry in dma-names.
+
+ - dma-names: Must include the following entry:
+ "tx"
+
+ - clocks : Contains an entry for each entry in clock-names.
+
+ - clock-names : Includes the following entries:
+ "sys" The system clock
+ "ref" The reference clock
+
+ - resets: Contains a phandle to the parallel out reset signal
+
+ - reset-names: Contains the reset signal name "rst"
+
+Optional Properties:
+
+ - interrupts : Contains the parallel out interrupt, if present
+
+Example:
+
+parallel_out: parallel-out@18100C00 {
+ compatible = "img,parallel-out";
+ reg = <0x18100C00 0x100>;
+ interrupts = <GIC_SHARED 19 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 16 0xffffffff 0>;
+ dma-names = "tx";
+ clocks = <&cr_periph SYS_CLK_PAUD_OUT>,
+ <&clk_core CLK_AUDIO_DAC>;
+ clock-names = "sys", "ref";
+ resets = <&pistachio_reset PISTACHIO_RESET_PRL_OUT>;
+ reset-names = "rst";
+ #sound-dai-cells = <0>;
+};
diff --git a/dts/Bindings/sound/img,pistachio-internal-dac.txt b/dts/Bindings/sound/img,pistachio-internal-dac.txt
new file mode 100644
index 0000000..4cc18fc
--- /dev/null
+++ b/dts/Bindings/sound/img,pistachio-internal-dac.txt
@@ -0,0 +1,18 @@
+Pistachio internal DAC DT bindings
+
+Required properties:
+
+ - compatible: "img,pistachio-internal-dac"
+
+ - img,cr-top : Must contain a phandle to the top level control syscon
+ node which contains the internal dac control registers
+
+ - VDD-supply : Digital power supply regulator (+1.8V or +3.3V)
+
+Examples:
+
+internal_dac: internal-dac {
+ compatible = "img,pistachio-internal-dac";
+ img,cr-top = <&cr_top>;
+ VDD-supply = <&supply3v3>;
+};
diff --git a/dts/Bindings/sound/img,spdif-in.txt b/dts/Bindings/sound/img,spdif-in.txt
new file mode 100644
index 0000000..aab9a81
--- /dev/null
+++ b/dts/Bindings/sound/img,spdif-in.txt
@@ -0,0 +1,41 @@
+Imagination Technologies SPDIF Input Controller
+
+Required Properties:
+
+ - compatible : Compatible list, must contain "img,spdif-in"
+
+ - #sound-dai-cells : Must be equal to 0
+
+ - reg : Offset and length of the register set for the device
+
+ - dmas: Contains an entry for each entry in dma-names.
+
+ - dma-names: Must include the following entry:
+ "rx"
+
+ - clocks : Contains an entry for each entry in clock-names
+
+ - clock-names : Includes the following entries:
+ "sys" The system clock
+
+Optional Properties:
+
+ - resets: Should contain a phandle to the spdif in reset signal, if any
+
+ - reset-names: Should contain the reset signal name "rst", if a
+ reset phandle is given
+
+ - interrupts : Contains the spdif in interrupt, if present
+
+Example:
+
+spdif_in: spdif-in@18100E00 {
+ compatible = "img,spdif-in";
+ reg = <0x18100E00 0x100>;
+ interrupts = <GIC_SHARED 20 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 15 0xffffffff 0>;
+ dma-names = "rx";
+ clocks = <&cr_periph SYS_CLK_SPDIF_IN>;
+ clock-names = "sys";
+ #sound-dai-cells = <0>;
+};
diff --git a/dts/Bindings/sound/img,spdif-out.txt b/dts/Bindings/sound/img,spdif-out.txt
new file mode 100644
index 0000000..470a519
--- /dev/null
+++ b/dts/Bindings/sound/img,spdif-out.txt
@@ -0,0 +1,44 @@
+Imagination Technologies SPDIF Output Controller
+
+Required Properties:
+
+ - compatible : Compatible list, must contain "img,spdif-out"
+
+ - #sound-dai-cells : Must be equal to 0
+
+ - reg : Offset and length of the register set for the device
+
+ - dmas: Contains an entry for each entry in dma-names.
+
+ - dma-names: Must include the following entry:
+ "tx"
+
+ - clocks : Contains an entry for each entry in clock-names.
+
+ - clock-names : Includes the following entries:
+ "sys" The system clock
+ "ref" The reference clock
+
+ - resets: Contains a phandle to the spdif out reset signal
+
+ - reset-names: Contains the reset signal name "rst"
+
+Optional Properties:
+
+ - interrupts : Contains the parallel out interrupt, if present
+
+Example:
+
+spdif_out: spdif-out@18100D00 {
+ compatible = "img,spdif-out";
+ reg = <0x18100D00 0x100>;
+ interrupts = <GIC_SHARED 21 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&mdc 14 0xffffffff 0>;
+ dma-names = "tx";
+ clocks = <&cr_periph SYS_CLK_SPDIF_OUT>,
+ <&clk_core CLK_SPDIF>;
+ clock-names = "sys", "ref";
+ resets = <&pistachio_reset PISTACHIO_RESET_SPDIF_OUT>;
+ reset-names = "rst";
+ #sound-dai-cells = <0>;
+};
diff --git a/dts/Bindings/sound/inno-rk3036.txt b/dts/Bindings/sound/inno-rk3036.txt
new file mode 100644
index 0000000..758de8e
--- /dev/null
+++ b/dts/Bindings/sound/inno-rk3036.txt
@@ -0,0 +1,20 @@
+Inno audio codec for RK3036
+
+Inno audio codec is integrated inside RK3036 SoC.
+
+Required properties:
+- compatible : Should be "rockchip,rk3036-codec".
+- reg : The registers of codec.
+- clock-names : Should be "acodec_pclk".
+- clocks : The clock of codec.
+- rockchip,grf : The phandle of grf device node.
+
+Example:
+
+ acodec: acodec-ana@20030000 {
+ compatible = "rk3036-codec";
+ reg = <0x20030000 0x4000>;
+ rockchip,grf = <&grf>;
+ clock-names = "acodec_pclk";
+ clocks = <&cru ACLK_VCODEC>;
+ };
diff --git a/dts/Bindings/sound/pcm1792a.txt b/dts/Bindings/sound/pcm179x.txt
index 970ba1e..4ae70d3 100644
--- a/dts/Bindings/sound/pcm1792a.txt
+++ b/dts/Bindings/sound/pcm179x.txt
@@ -1,4 +1,4 @@
-Texas Instruments pcm1792a DT bindings
+Texas Instruments pcm179x DT bindings
This driver supports the SPI bus.
diff --git a/dts/Bindings/sound/renesas,rsnd.txt b/dts/Bindings/sound/renesas,rsnd.txt
index c57cbd6..8ee0fa9 100644
--- a/dts/Bindings/sound/renesas,rsnd.txt
+++ b/dts/Bindings/sound/renesas,rsnd.txt
@@ -7,8 +7,11 @@ Required properties:
"renesas,rcar_sound-gen3" if generation3
Examples with soctypes are:
- "renesas,rcar_sound-r8a7778" (R-Car M1A)
+ - "renesas,rcar_sound-r8a7779" (R-Car H1)
- "renesas,rcar_sound-r8a7790" (R-Car H2)
- "renesas,rcar_sound-r8a7791" (R-Car M2-W)
+ - "renesas,rcar_sound-r8a7793" (R-Car M2-N)
+ - "renesas,rcar_sound-r8a7794" (R-Car E2)
- "renesas,rcar_sound-r8a7795" (R-Car H3)
- reg : Should contain the register physical address.
required register is
@@ -34,6 +37,8 @@ Required properties:
see below for detail.
- #sound-dai-cells : it must be 0 if your system is using single DAI
it must be 1 if your system is using multi DAI
+
+Optional properties:
- #clock-cells : it must be 0 if your system has audio_clkout
it must be 1 if your system has audio_clkout0/1/2/3
- clock-frequency : for all audio_clkout0/1/2/3
@@ -244,3 +249,80 @@ rcar_sound: sound@ec500000 {
};
};
};
+
+Example: simple sound card
+
+ rsnd_ak4643: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcodec>;
+ simple-audio-card,frame-master = <&sndcodec>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4643>;
+ clocks = <&audio_clock>;
+ };
+ };
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ status = "okay";
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &src2 &dvc0>;
+ capture = <&ssi1 &src3 &dvc1>;
+ };
+ };
+};
+
+&ssi1 {
+ shared-pin;
+};
+
+Example: simple sound card for TDM
+
+ rsnd_tdm: sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcodec>;
+ simple-audio-card,frame-master = <&sndcodec>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ dai-tdm-slot-num = <6>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&xxx>;
+ };
+ };
+
+Example: simple sound card for Multi channel
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ /* Single DAI */
+ #sound-dai-cells = <0>;
+
+ status = "okay";
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>;
+ };
+ };
+};
diff --git a/dts/Bindings/sound/renesas,rsrc-card.txt b/dts/Bindings/sound/renesas,rsrc-card.txt
index 962748a..2b2caa2 100644
--- a/dts/Bindings/sound/renesas,rsrc-card.txt
+++ b/dts/Bindings/sound/renesas,rsrc-card.txt
@@ -4,8 +4,8 @@ Renesas Sampling Rate Convert Sound Card specifies audio DAI connections of SoC
Required properties:
-- compatible : "renesas,rsrc-card,<board>"
- Examples with soctypes are:
+- compatible : "renesas,rsrc-card{,<board>}"
+ Examples with boards are:
- "renesas,rsrc-card"
- "renesas,rsrc-card,lager"
- "renesas,rsrc-card,koelsch"
diff --git a/dts/Bindings/sound/rockchip-i2s.txt b/dts/Bindings/sound/rockchip-i2s.txt
index 2267d24..b7f3a93 100644
--- a/dts/Bindings/sound/rockchip-i2s.txt
+++ b/dts/Bindings/sound/rockchip-i2s.txt
@@ -19,6 +19,7 @@ Required properties:
- clock-names: should contain followings:
- "i2s_hclk": clock for I2S BUS
- "i2s_clk" : clock for I2S controller
+- rockchip,playback-channels: max playback channels, if not set, 8 channels default.
- rockchip,capture-channels: max capture channels, if not set, 2 channels default.
Example for rk3288 I2S controller:
@@ -31,5 +32,6 @@ i2s@ff890000 {
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+ rockchip,playback-channels = <8>;
rockchip,capture-channels = <2>;
};
diff --git a/dts/Bindings/sound/rt5616.txt b/dts/Bindings/sound/rt5616.txt
new file mode 100644
index 0000000..efc48c6
--- /dev/null
+++ b/dts/Bindings/sound/rt5616.txt
@@ -0,0 +1,26 @@
+RT5616 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5616".
+
+- reg : The I2C address of the device.
+
+Pins on the device (for linking into audio routes) for RT5616:
+
+ * IN1P
+ * IN2P
+ * IN2N
+ * LOUTL
+ * LOUTR
+ * HPOL
+ * HPOR
+
+Example:
+
+codec: rt5616@1b {
+ compatible = "realtek,rt5616";
+ reg = <0x1b>;
+};
diff --git a/dts/Bindings/sound/rt5651.txt b/dts/Bindings/sound/rt5651.txt
new file mode 100644
index 0000000..3875233
--- /dev/null
+++ b/dts/Bindings/sound/rt5651.txt
@@ -0,0 +1,41 @@
+RT5651 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt5651".
+
+- reg : The I2C address of the device.
+
+Optional properties:
+
+- realtek,in2-differential
+ Boolean. Indicate MIC2 input are differential, rather than single-ended.
+
+- realtek,dmic-en
+ Boolean. true if dmic is used.
+
+Pins on the device (for linking into audio routes) for RT5651:
+
+ * DMIC L1
+ * DMIC R1
+ * IN1P
+ * IN2P
+ * IN2N
+ * IN3P
+ * HPOL
+ * HPOR
+ * LOUTL
+ * LOUTR
+ * PDML
+ * PDMR
+
+Example:
+
+codec: rt5651@1a {
+ compatible = "realtek,rt5651";
+ reg = <0x1a>;
+ realtek,dmic-en = "true";
+ realtek,in2-diff = "false";
+};
diff --git a/dts/Bindings/sound/rt5659.txt b/dts/Bindings/sound/rt5659.txt
new file mode 100644
index 0000000..5f79e7f
--- /dev/null
+++ b/dts/Bindings/sound/rt5659.txt
@@ -0,0 +1,75 @@
+RT5659/RT5658 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5659" or "realtek,rt5658".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+- realtek,in1-differential
+- realtek,in3-differential
+- realtek,in4-differential
+ Boolean. Indicate MIC1/3/4 input are differential, rather than single-ended.
+
+- realtek,dmic1-data-pin
+ 0: dmic1 is not used
+ 1: using IN2N pin as dmic1 data pin
+ 2: using GPIO5 pin as dmic1 data pin
+ 3: using GPIO9 pin as dmic1 data pin
+ 4: using GPIO11 pin as dmic1 data pin
+
+- realtek,dmic2-data-pin
+ 0: dmic2 is not used
+ 1: using IN2P pin as dmic2 data pin
+ 2: using GPIO6 pin as dmic2 data pin
+ 3: using GPIO10 pin as dmic2 data pin
+ 4: using GPIO12 pin as dmic2 data pin
+
+- realtek,jd-src
+ 0: No JD is used
+ 1: using JD3 as JD source
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+- realtek,reset-gpios : The GPIO that controls the CODEC's RESET pin.
+
+Pins on the device (for linking into audio routes) for RT5659/RT5658:
+
+ * DMIC L1
+ * DMIC R1
+ * DMIC L2
+ * DMIC R2
+ * IN1P
+ * IN1N
+ * IN2P
+ * IN2N
+ * IN3P
+ * IN3N
+ * IN4P
+ * IN4N
+ * HPOL
+ * HPOR
+ * SPOL
+ * SPOR
+ * LOUTL
+ * LOUTR
+ * MONOOUT
+ * PDML
+ * PDMR
+ * SPDIF
+
+Example:
+
+rt5659 {
+ compatible = "realtek,rt5659";
+ reg = <0x1b>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+ realtek,ldo1-en-gpios =
+ <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+};
diff --git a/dts/Bindings/sound/rt5677.txt b/dts/Bindings/sound/rt5677.txt
index f070789..1b3c13d 100644
--- a/dts/Bindings/sound/rt5677.txt
+++ b/dts/Bindings/sound/rt5677.txt
@@ -18,7 +18,7 @@ Required properties:
Optional properties:
- realtek,pow-ldo2-gpio : The GPIO that controls the CODEC's POW_LDO2 pin.
-- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin.
+- realtek,reset-gpio : The GPIO that controls the CODEC's RESET pin. Active low.
- realtek,in1-differential
- realtek,in2-differential
diff --git a/dts/Bindings/sound/sun4i-codec.txt b/dts/Bindings/sound/sun4i-codec.txt
index c92966b..0dce690 100644
--- a/dts/Bindings/sound/sun4i-codec.txt
+++ b/dts/Bindings/sound/sun4i-codec.txt
@@ -14,6 +14,9 @@ Required properties:
- "apb": the parent APB clock for this controller
- "codec": the parent module clock
+Optional properties:
+- allwinner,pa-gpios: gpio to enable external amplifier
+
Example:
codec: codec@01c22c00 {
#sound-dai-cells = <0>;
diff --git a/dts/Bindings/sound/ti,pcm3168a.txt b/dts/Bindings/sound/ti,pcm3168a.txt
new file mode 100644
index 0000000..5d9cb84
--- /dev/null
+++ b/dts/Bindings/sound/ti,pcm3168a.txt
@@ -0,0 +1,48 @@
+Texas Instruments pcm3168a DT bindings
+
+This driver supports both SPI and I2C bus access for this codec
+
+Required properties:
+
+ - compatible: "ti,pcm3168a"
+
+ - clocks : Contains an entry for each entry in clock-names
+
+ - clock-names : Includes the following entries:
+ "scki" The system clock
+
+ - VDD1-supply : Digital power supply regulator 1 (+3.3V)
+
+ - VDD2-supply : Digital power supply regulator 2 (+3.3V)
+
+ - VCCAD1-supply : ADC power supply regulator 1 (+5V)
+
+ - VCCAD2-supply : ADC power supply regulator 2 (+5V)
+
+ - VCCDA1-supply : DAC power supply regulator 1 (+5V)
+
+ - VCCDA2-supply : DAC power supply regulator 2 (+5V)
+
+For required properties on SPI/I2C, consult SPI/I2C device tree documentation
+
+Examples:
+
+i2c0: i2c0@0 {
+
+ ...
+
+ pcm3168a: audio-codec@44 {
+ compatible = "ti,pcm3168a";
+ reg = <0x44>;
+ clocks = <&clk_core CLK_AUDIO>;
+ clock-names = "scki";
+ VDD1-supply = <&supply3v3>;
+ VDD2-supply = <&supply3v3>;
+ VCCAD1-supply = <&supply5v0>;
+ VCCAD2-supply = <&supply5v0>;
+ VCCDA1-supply = <&supply5v0>;
+ VCCDA2-supply = <&supply5v0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dac_clk_pin>;
+ };
+};
diff --git a/dts/Bindings/sound/wlf,wm8974.txt b/dts/Bindings/sound/wlf,wm8974.txt
new file mode 100644
index 0000000..01d3a7c
--- /dev/null
+++ b/dts/Bindings/sound/wlf,wm8974.txt
@@ -0,0 +1,15 @@
+WM8974 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+ - compatible: "wlf,wm8974"
+ - reg: the I2C address or SPI chip select number of the device
+
+Examples:
+
+codec: wm8974@1a {
+ compatible = "wlf,wm8974";
+ reg = <0x1a>;
+};
diff --git a/dts/Bindings/sound/wm8994.txt b/dts/Bindings/sound/wm8994.txt
index e045e90..68c4e8d 100644
--- a/dts/Bindings/sound/wm8994.txt
+++ b/dts/Bindings/sound/wm8994.txt
@@ -30,7 +30,7 @@ Optional properties:
- #interrupt-cells: the number of cells to describe an IRQ, this should be 2.
The first cell is the IRQ number.
The second cell is the flags, encoded as the trigger masks from
- Documentation/devicetree/bindings/interrupts.txt
+ Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
- clocks : A list of up to two phandle and clock specifier pairs
- clock-names : A list of clock names sorted in the same order as clocks.
diff --git a/dts/Bindings/spi/sh-msiof.txt b/dts/Bindings/spi/sh-msiof.txt
index 705075d..aa005c1 100644
--- a/dts/Bindings/spi/sh-msiof.txt
+++ b/dts/Bindings/spi/sh-msiof.txt
@@ -10,6 +10,7 @@ Required properties:
"renesas,msiof-r8a7792" (R-Car V2H)
"renesas,msiof-r8a7793" (R-Car M2-N)
"renesas,msiof-r8a7794" (R-Car E2)
+ "renesas,msiof-sh73a0" (SH-Mobile AG5)
- reg : A list of offsets and lengths of the register sets for
the device.
If only one register set is present, it is to be used
diff --git a/dts/Bindings/spi/spi-mt65xx.txt b/dts/Bindings/spi/spi-mt65xx.txt
index ce363c9..e43f4cf 100644
--- a/dts/Bindings/spi/spi-mt65xx.txt
+++ b/dts/Bindings/spi/spi-mt65xx.txt
@@ -2,9 +2,10 @@ Binding for MTK SPI controller
Required properties:
- compatible: should be one of the following.
- - mediatek,mt8173-spi: for mt8173 platforms
- - mediatek,mt8135-spi: for mt8135 platforms
+ - mediatek,mt2701-spi: for mt2701 platforms
- mediatek,mt6589-spi: for mt6589 platforms
+ - mediatek,mt8135-spi: for mt8135 platforms
+ - mediatek,mt8173-spi: for mt8173 platforms
- #address-cells: should be 1.
@@ -29,10 +30,10 @@ Required properties:
muxes clock, and "spi-clk" for the clock gate.
Optional properties:
--cs-gpios: see spi-bus.txt, only required for MT8173.
+-cs-gpios: see spi-bus.txt.
- mediatek,pad-select: specify which pins group(ck/mi/mo/cs) spi
- controller used. This is a array, the element value should be 0~3,
+ controller used. This is an array, the element value should be 0~3,
only required for MT8173.
0: specify GPIO69,70,71,72 for spi pins.
1: specify GPIO102,103,104,105 for spi pins.
diff --git a/dts/Bindings/spi/ti_qspi.txt b/dts/Bindings/spi/ti_qspi.txt
index 601a360..cc8304a 100644
--- a/dts/Bindings/spi/ti_qspi.txt
+++ b/dts/Bindings/spi/ti_qspi.txt
@@ -15,14 +15,32 @@ Recommended properties:
- spi-max-frequency: Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
+Optional properties:
+- syscon-chipselects: Handle to system control region contains QSPI
+ chipselect register and offset of that register.
+
Example:
+For am4372:
qspi: qspi@4b300000 {
- compatible = "ti,dra7xxx-qspi";
- reg = <0x47900000 0x100>, <0x30000000 0x3ffffff>;
+ compatible = "ti,am4372-qspi";
+ reg = <0x47900000 0x100>, <0x30000000 0x4000000>;
reg-names = "qspi_base", "qspi_mmap";
#address-cells = <1>;
#size-cells = <0>;
spi-max-frequency = <25000000>;
ti,hwmods = "qspi";
};
+
+For dra7xx:
+qspi: qspi@4b300000 {
+ compatible = "ti,dra7xxx-qspi";
+ reg = <0x4b300000 0x100>,
+ <0x5c000000 0x4000000>,
+ reg-names = "qspi_base", "qspi_mmap";
+ syscon-chipselects = <&scm_conf 0x558>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ spi-max-frequency = <48000000>;
+ ti,hwmods = "qspi";
+};
diff --git a/dts/Bindings/arm/rockchip/pmu-sram.txt b/dts/Bindings/sram/rockchip-pmu-sram.txt
index 6b42fda..6b42fda 100644
--- a/dts/Bindings/arm/rockchip/pmu-sram.txt
+++ b/dts/Bindings/sram/rockchip-pmu-sram.txt
diff --git a/dts/Bindings/arm/rockchip/smp-sram.txt b/dts/Bindings/sram/rockchip-smp-sram.txt
index d9416fb..800701e 100644
--- a/dts/Bindings/arm/rockchip/smp-sram.txt
+++ b/dts/Bindings/sram/rockchip-smp-sram.txt
@@ -12,7 +12,7 @@ Required sub-node properties:
- compatible : should be "rockchip,rk3066-smp-sram"
The rest of the properties should follow the generic mmio-sram discription
-found in ../../misc/sram.txt
+found in Documentation/devicetree/bindings/sram/sram.txt
Example:
diff --git a/dts/Bindings/arm/exynos/smp-sysram.txt b/dts/Bindings/sram/samsung-sram.txt
index 4a0a4f7..6bc474b 100644
--- a/dts/Bindings/arm/exynos/smp-sysram.txt
+++ b/dts/Bindings/sram/samsung-sram.txt
@@ -15,7 +15,7 @@ Required sub-node properties:
"samsung,exynos4210-sysram-ns" : for Non-secure SYSRAM
The rest of the properties should follow the generic mmio-sram discription
-found in ../../misc/sysram.txt
+found in Documentation/devicetree/bindings/sram/sram.txt
Example:
diff --git a/dts/Bindings/misc/sram.txt b/dts/Bindings/sram/sram.txt
index 42ee943..42ee943 100644
--- a/dts/Bindings/misc/sram.txt
+++ b/dts/Bindings/sram/sram.txt
diff --git a/dts/Bindings/soc/sunxi/sram.txt b/dts/Bindings/sram/sunxi-sram.txt
index 0676981..8d56654 100644
--- a/dts/Bindings/soc/sunxi/sram.txt
+++ b/dts/Bindings/sram/sunxi-sram.txt
@@ -16,7 +16,7 @@ SRAM nodes
----------
Each SRAM is described using the mmio-sram bindings documented in
-Documentation/devicetree/bindings/misc/sram.txt
+Documentation/devicetree/bindings/sram/sram.txt
Each SRAM will have SRAM sections that are going to be handled by the
SRAM controller as subnodes. These sections are represented following
diff --git a/dts/Bindings/staging/ion/hi6220-ion.txt b/dts/Bindings/staging/ion/hi6220-ion.txt
new file mode 100644
index 0000000..c59e27c
--- /dev/null
+++ b/dts/Bindings/staging/ion/hi6220-ion.txt
@@ -0,0 +1,31 @@
+Hi6220 SoC ION
+===================================================================
+Required properties:
+- compatible : "hisilicon,hi6220-ion"
+- list of the ION heaps
+ - heap name : maybe heap_sys_user@0
+ - heap id : id should be unique in the system.
+ - heap base : base ddr address of the heap,0 means that
+ it is dynamic.
+ - heap size : memory size and 0 means it is dynamic.
+ - heap type : the heap type of the heap, please also
+ see the define in ion.h(drivers/staging/android/uapi/ion.h)
+-------------------------------------------------------------------
+Example:
+ hi6220-ion {
+ compatible = "hisilicon,hi6220-ion";
+ heap_sys_user@0 {
+ heap-name = "sys_user";
+ heap-id = <0x0>;
+ heap-base = <0x0>;
+ heap-size = <0x0>;
+ heap-type = "ion_system";
+ };
+ heap_sys_contig@0 {
+ heap-name = "sys_contig";
+ heap-id = <0x1>;
+ heap-base = <0x0>;
+ heap-size = <0x0>;
+ heap-type = "ion_system_contig";
+ };
+ };
diff --git a/dts/Bindings/thermal/qoriq-thermal.txt b/dts/Bindings/thermal/qoriq-thermal.txt
new file mode 100644
index 0000000..66223d5
--- /dev/null
+++ b/dts/Bindings/thermal/qoriq-thermal.txt
@@ -0,0 +1,63 @@
+* Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
+
+Required properties:
+- compatible : Must include "fsl,qoriq-tmu". The version of the device is
+ determined by the TMU IP Block Revision Register (IPBRR0) at
+ offset 0x0BF8.
+ Table of correspondences between IPBRR0 values and example chips:
+ Value Device
+ ---------- -----
+ 0x01900102 T1040
+- reg : Address range of TMU registers.
+- interrupts : Contains the interrupt for TMU.
+- fsl,tmu-range : The values to be programmed into TTRnCR, as specified by
+ the SoC reference manual. The first cell is TTR0CR, the second is
+ TTR1CR, etc.
+- fsl,tmu-calibration : A list of cell pairs containing temperature
+ calibration data, as specified by the SoC reference manual.
+ The first cell of each pair is the value to be written to TTCFGR,
+ and the second is the value to be written to TSCFGR.
+
+Example:
+
+tmu@f0000 {
+ compatible = "fsl,qoriq-tmu";
+ reg = <0xf0000 0x1000>;
+ interrupts = <18 2 0 0>;
+ fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>;
+ fsl,tmu-calibration = <0x00000000 0x00000025
+ 0x00000001 0x00000028
+ 0x00000002 0x0000002d
+ 0x00000003 0x00000031
+ 0x00000004 0x00000036
+ 0x00000005 0x0000003a
+ 0x00000006 0x00000040
+ 0x00000007 0x00000044
+ 0x00000008 0x0000004a
+ 0x00000009 0x0000004f
+ 0x0000000a 0x00000054
+
+ 0x00010000 0x0000000d
+ 0x00010001 0x00000013
+ 0x00010002 0x00000019
+ 0x00010003 0x0000001f
+ 0x00010004 0x00000025
+ 0x00010005 0x0000002d
+ 0x00010006 0x00000033
+ 0x00010007 0x00000043
+ 0x00010008 0x0000004b
+ 0x00010009 0x00000053
+
+ 0x00020000 0x00000010
+ 0x00020001 0x00000017
+ 0x00020002 0x0000001f
+ 0x00020003 0x00000029
+ 0x00020004 0x00000031
+ 0x00020005 0x0000003c
+ 0x00020006 0x00000042
+ 0x00020007 0x0000004d
+ 0x00020008 0x00000056
+
+ 0x00030000 0x00000012
+ 0x00030001 0x0000001d>;
+};
diff --git a/dts/Bindings/thermal/rockchip-thermal.txt b/dts/Bindings/thermal/rockchip-thermal.txt
index 0dfa60d..08efe6b 100644
--- a/dts/Bindings/thermal/rockchip-thermal.txt
+++ b/dts/Bindings/thermal/rockchip-thermal.txt
@@ -2,8 +2,10 @@
Required properties:
- compatible : should be "rockchip,<name>-tsadc"
+ "rockchip,rk3228-tsadc": found on RK3228 SoCs
"rockchip,rk3288-tsadc": found on RK3288 SoCs
"rockchip,rk3368-tsadc": found on RK3368 SoCs
+ "rockchip,rk3399-tsadc": found on RK3399 SoCs
- reg : physical base address of the controller and length of memory mapped
region.
- interrupts : The interrupt number to the cpu. The interrupt specifier format
diff --git a/dts/Bindings/timer/mediatek,mtk-timer.txt b/dts/Bindings/timer/mediatek,mtk-timer.txt
index 64083bc..8ff54eb 100644
--- a/dts/Bindings/timer/mediatek,mtk-timer.txt
+++ b/dts/Bindings/timer/mediatek,mtk-timer.txt
@@ -3,6 +3,7 @@ Mediatek MT6577, MT6572 and MT6589 Timers
Required properties:
- compatible should contain:
+ * "mediatek,mt2701-timer" for MT2701 compatible timers
* "mediatek,mt6580-timer" for MT6580 compatible timers
* "mediatek,mt6589-timer" for MT6589 compatible timers
* "mediatek,mt8127-timer" for MT8127 compatible timers
diff --git a/dts/Bindings/usb/dwc2.txt b/dts/Bindings/usb/dwc2.txt
index fd132cb..2213682 100644
--- a/dts/Bindings/usb/dwc2.txt
+++ b/dts/Bindings/usb/dwc2.txt
@@ -4,6 +4,7 @@ Platform DesignWare HS OTG USB 2.0 controller
Required properties:
- compatible : One of:
- brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
+ - hisilicon,hi6220-usb: The DWC2 USB controller instance in the hi6220 SoC.
- rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc;
- "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc;
- "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
diff --git a/dts/Bindings/usb/dwc3-xilinx.txt b/dts/Bindings/usb/dwc3-xilinx.txt
new file mode 100644
index 0000000..30361b3
--- /dev/null
+++ b/dts/Bindings/usb/dwc3-xilinx.txt
@@ -0,0 +1,33 @@
+Xilinx SuperSpeed DWC3 USB SoC controller
+
+Required properties:
+- compatible: Should contain "xlnx,zynqmp-dwc3"
+- clocks: A list of phandles for the clocks listed in clock-names
+- clock-names: Should contain the following:
+ "bus_clk" Master/Core clock, have to be >= 125 MHz for SS
+ operation and >= 60MHz for HS operation
+
+ "ref_clk" Clock source to core during PHY power down
+
+Required child node:
+A child node must exist to represent the core DWC3 IP block. The name of
+the node is not important. The content of the node is defined in dwc3.txt.
+
+Example device node:
+
+ usb@0 {
+ #address-cells = <0x2>;
+ #size-cells = <0x1>;
+ status = "okay";
+ compatible = "xlnx,zynqmp-dwc3";
+ clock-names = "bus_clk" "ref_clk";
+ clocks = <&clk125>, <&clk125>;
+ ranges;
+
+ dwc3@fe200000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xfe200000 0x40000>;
+ interrupts = <0x0 0x41 0x4>;
+ dr_mode = "host";
+ };
+ };
diff --git a/dts/Bindings/usb/mt8173-xhci.txt b/dts/Bindings/usb/mt8173-xhci.txt
new file mode 100644
index 0000000..b3a7ffa
--- /dev/null
+++ b/dts/Bindings/usb/mt8173-xhci.txt
@@ -0,0 +1,51 @@
+MT8173 xHCI
+
+The device node for Mediatek SOC USB3.0 host controller
+
+Required properties:
+ - compatible : should contain "mediatek,mt8173-xhci"
+ - reg : specifies physical base address and size of the registers,
+ the first one for MAC, the second for IPPC
+ - interrupts : interrupt used by the controller
+ - power-domains : a phandle to USB power domain node to control USB's
+ mtcmos
+ - vusb33-supply : regulator of USB avdd3.3v
+
+ - clocks : a list of phandle + clock-specifier pairs, one for each
+ entry in clock-names
+ - clock-names : must contain
+ "sys_ck": for clock of xHCI MAC
+ "wakeup_deb_p0": for USB wakeup debounce clock of port0
+ "wakeup_deb_p1": for USB wakeup debounce clock of port1
+
+ - phys : a list of phandle + phy specifier pairs
+
+Optional properties:
+ - mediatek,wakeup-src : 1: ip sleep wakeup mode; 2: line state wakeup
+ mode;
+ - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup
+ control register, it depends on "mediatek,wakeup-src".
+ - vbus-supply : reference to the VBUS regulator;
+ - usb3-lpm-capable : supports USB3.0 LPM
+
+Example:
+usb30: usb@11270000 {
+ compatible = "mediatek,mt8173-xhci";
+ reg = <0 0x11270000 0 0x1000>,
+ <0 0x11280700 0 0x0100>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
+ clocks = <&topckgen CLK_TOP_USB30_SEL>,
+ <&pericfg CLK_PERI_USB0>,
+ <&pericfg CLK_PERI_USB1>;
+ clock-names = "sys_ck",
+ "wakeup_deb_p0",
+ "wakeup_deb_p1";
+ phys = <&phy_port0 PHY_TYPE_USB3>,
+ <&phy_port1 PHY_TYPE_USB2>;
+ vusb33-supply = <&mt6397_vusb_reg>;
+ vbus-supply = <&usb_p1_vbus>;
+ usb3-lpm-capable;
+ mediatek,syscon-wakeup = <&pericfg>;
+ mediatek,wakeup-src = <1>;
+};
diff --git a/dts/Bindings/usb/octeon-usb.txt b/dts/Bindings/usb/octeon-usb.txt
new file mode 100644
index 0000000..205c8d2
--- /dev/null
+++ b/dts/Bindings/usb/octeon-usb.txt
@@ -0,0 +1,62 @@
+OCTEON/OCTEON+ USB BLOCK
+
+1) Main node
+
+ Required properties:
+
+ - compatible: must be "cavium,octeon-5750-usbn"
+
+ - reg: specifies the physical base address of the USBN block and
+ the length of the memory mapped region.
+
+ - #address-cells: specifies the number of cells needed to encode an
+ address. The value must be 2.
+
+ - #size-cells: specifies the number of cells used to represent the size
+ of an address. The value must be 2.
+
+ - ranges: specifies the translation between child address space and parent
+ address space.
+
+ - clock-frequency: speed of the USB reference clock. Allowed values are
+ 12000000, 24000000 or 48000000.
+
+ - cavium,refclk-type: type of the USB reference clock. Allowed values are
+ "crystal" or "external".
+
+ - refclk-frequency: deprecated, use "clock-frequency".
+
+ - refclk-type: deprecated, use "cavium,refclk-type".
+
+2) Child node
+
+ The main node must have one child node which describes the built-in
+ USB controller.
+
+ Required properties:
+
+ - compatible: must be "cavium,octeon-5750-usbc"
+
+ - reg: specifies the physical base address of the USBC block and
+ the length of the memory mapped region.
+
+ - interrupts: specifies the interrupt number for the USB controller.
+
+3) Example:
+
+ usbn: usbn@1180068000000 {
+ compatible = "cavium,octeon-5750-usbn";
+ reg = <0x11800 0x68000000 0x0 0x1000>;
+ ranges; /* Direct mapping */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ clock-frequency = <12000000>;
+ cavium,refclk-type = "crystal";
+
+ usbc@16f0010000000 {
+ compatible = "cavium,octeon-5750-usbc";
+ reg = <0x16f00 0x10000000 0x0 0x80000>;
+ interrupts = <0 56>;
+ };
+ };
+
diff --git a/dts/Bindings/usb/renesas_usb3.txt b/dts/Bindings/usb/renesas_usb3.txt
new file mode 100644
index 0000000..8d52766
--- /dev/null
+++ b/dts/Bindings/usb/renesas_usb3.txt
@@ -0,0 +1,23 @@
+Renesas Electronics USB3.0 Peripheral driver
+
+Required properties:
+ - compatible: Must contain one of the following:
+ - "renesas,r8a7795-usb3-peri"
+ - reg: Base address and length of the register for the USB3.0 Peripheral
+ - interrupts: Interrupt specifier for the USB3.0 Peripheral
+ - clocks: clock phandle and specifier pair
+
+Example:
+ usb3_peri0: usb@ee020000 {
+ compatible = "renesas,r8a7795-usb3-peri";
+ reg = <0 0xee020000 0 0x400>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 328>;
+ };
+
+ usb3_peri1: usb@ee060000 {
+ compatible = "renesas,r8a7795-usb3-peri";
+ reg = <0 0xee060000 0 0x400>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 327>;
+ };
diff --git a/dts/Bindings/usb/renesas_usbhs.txt b/dts/Bindings/usb/renesas_usbhs.txt
index 7d48f63..b604056 100644
--- a/dts/Bindings/usb/renesas_usbhs.txt
+++ b/dts/Bindings/usb/renesas_usbhs.txt
@@ -1,11 +1,21 @@
Renesas Electronics USBHS driver
Required properties:
- - compatible: Must contain one of the following:
- - "renesas,usbhs-r8a7790"
- - "renesas,usbhs-r8a7791"
- - "renesas,usbhs-r8a7794"
- - "renesas,usbhs-r8a7795"
+ - compatible: Must contain one or more of the following:
+
+ - "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device
+ - "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device
+ - "renesas,usbhs-r8a7792" for r8a7792 (R-Car V2H) compatible device
+ - "renesas,usbhs-r8a7793" for r8a7793 (R-Car M2-N) compatible device
+ - "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device
+ - "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device
+ - "renesas,rcar-gen2-usbhs" for R-Car Gen2 compatible device
+ - "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device
+
+ When compatible with the generic version, nodes must list the
+ SoC-specific version corresponding to the platform first followed
+ by the generic version.
+
- reg: Base address and length of the register for the USBHS
- interrupts: Interrupt specifier for the USBHS
- clocks: A list of phandle + clock specifier pairs
@@ -22,7 +32,7 @@ Optional properties:
Example:
usbhs: usb@e6590000 {
- compatible = "renesas,usbhs-r8a7790";
+ compatible = "renesas,usbhs-r8a7790", "renesas,rcar-gen2-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
diff --git a/dts/Bindings/usb/usb-xhci.txt b/dts/Bindings/usb/usb-xhci.txt
index 86f67f0..0825732 100644
--- a/dts/Bindings/usb/usb-xhci.txt
+++ b/dts/Bindings/usb/usb-xhci.txt
@@ -3,8 +3,8 @@ USB xHCI controllers
Required properties:
- compatible: should be one of "generic-xhci",
"marvell,armada-375-xhci", "marvell,armada-380-xhci",
- "renesas,xhci-r8a7790", "renesas,xhci-r8a7791" (deprecated:
- "xhci-platform").
+ "renesas,xhci-r8a7790", "renesas,xhci-r8a7791", "renesas,xhci-r8a7793",
+ "renesas,xhci-r8a7795" (deprecated: "xhci-platform").
- reg: should contain address and length of the standard XHCI
register set for the device.
- interrupts: one XHCI interrupt should be described here.
diff --git a/dts/Bindings/usb/usb3503.txt b/dts/Bindings/usb/usb3503.txt
index 52493b1..c1a0a91 100644
--- a/dts/Bindings/usb/usb3503.txt
+++ b/dts/Bindings/usb/usb3503.txt
@@ -18,7 +18,8 @@ Optional properties:
- refclk: Clock used for driving REFCLK signal (optional, if not provided
the driver assumes that clock signal is always available, its
rate is specified by REF_SEL pins and a value from the primary
- reference clock frequencies table is used)
+ reference clock frequencies table is used). Use clocks and
+ clock-names in order to assign it
- refclk-frequency: Frequency of the REFCLK signal as defined by REF_SEL
pins (optional, if not provided, driver will not set rate of the
REFCLK signal and assume that a value from the primary reference
@@ -33,4 +34,6 @@ Examples:
intn-gpios = <&gpx3 4 1>;
reset-gpios = <&gpx3 5 1>;
initial-mode = <1>;
+ clocks = <&clks 80>;
+ clock-names = "refclk";
};
diff --git a/dts/Bindings/vendor-prefixes.txt b/dts/Bindings/vendor-prefixes.txt
index 55df1d4..72e2c5a 100644
--- a/dts/Bindings/vendor-prefixes.txt
+++ b/dts/Bindings/vendor-prefixes.txt
@@ -33,6 +33,7 @@ auo AU Optronics Corporation
avago Avago Technologies
avic Shanghai AVIC Optoelectronics Co., Ltd.
axis Axis Communications AB
+boe BOE Technology Group Co., Ltd.
bosch Bosch Sensortec GmbH
boundary Boundary Devices Inc.
brcm Broadcom Corporation
@@ -123,6 +124,8 @@ jedec JEDEC Solid State Technology Association
karo Ka-Ro electronics GmbH
keymile Keymile GmbH
kinetic Kinetic Technologies
+kosagi Sutajio Ko-Usagi PTE Ltd.
+kyo Kyocera Corporation
lacie LaCie
lantiq Lantiq Semiconductor
lenovo Lenovo Group Ltd.
@@ -161,6 +164,7 @@ nuvoton Nuvoton Technology Corporation
nvidia NVIDIA
nxp NXP Semiconductors
okaya Okaya Electric America, Inc.
+olimex OLIMEX Ltd.
onnn ON Semiconductor Corp.
opencores OpenCores.org
option Option NV
@@ -180,6 +184,7 @@ qca Qualcomm Atheros, Inc.
qcom Qualcomm Technologies, Inc
qemu QEMU, a generic and open source machine emulator and virtualizer
qi Qi Hardware
+qiaodian QiaoDian XianShi Corporation
qnap QNAP Systems, Inc.
radxa Radxa
raidsonic RaidSonic Technology GmbH
@@ -218,11 +223,13 @@ sony Sony Corporation
spansion Spansion Inc.
sprd Spreadtrum Communications Inc.
st STMicroelectronics
+startek Startek
ste ST-Ericsson
stericsson ST-Ericsson
synology Synology, Inc.
tbs TBS Technologies
tcl Toby Churchill Ltd.
+technologic Technologic Systems
thine THine Electronics, Inc.
ti Texas Instruments
tlm Trusted Logic Mobility
@@ -238,6 +245,7 @@ v3 V3 Semiconductor
variscite Variscite Ltd.
via VIA Technologies, Inc.
virtio Virtual I/O Device Specification, developed by the OASIS consortium
+vivante Vivante Corporation
voipac Voipac Technologies s.r.o.
wexler Wexler
winbond Winbond Electronics corp.
diff --git a/dts/Bindings/watchdog/alphascale-asm9260.txt b/dts/Bindings/watchdog/alphascale-asm9260.txt
new file mode 100644
index 0000000..75b265a
--- /dev/null
+++ b/dts/Bindings/watchdog/alphascale-asm9260.txt
@@ -0,0 +1,35 @@
+Alphascale asm9260 Watchdog timer
+
+Required properties:
+
+- compatible : should be "alphascale,asm9260-wdt".
+- reg : Specifies base physical address and size of the registers.
+- clocks : the clocks feeding the watchdog timer. See clock-bindings.txt
+- clock-names : should be set to
+ "mod" - source for tick counter.
+ "ahb" - ahb gate.
+- resets : phandle pointing to the system reset controller with
+ line index for the watchdog.
+- reset-names : should be set to "wdt_rst".
+
+Optional properties:
+- timeout-sec : shall contain the default watchdog timeout in seconds,
+ if unset, the default timeout is 30 seconds.
+- alphascale,mode : three modes are supported
+ "hw" - hw reset (default).
+ "sw" - sw reset.
+ "debug" - no action is taken.
+
+Example:
+
+watchdog0: watchdog@80048000 {
+ compatible = "alphascale,asm9260-wdt";
+ reg = <0x80048000 0x10>;
+ clocks = <&acc CLKID_SYS_WDT>, <&acc CLKID_AHB_WDT>;
+ clock-names = "mod", "ahb";
+ interrupts = <55>;
+ resets = <&rst WDT_RESET>;
+ reset-names = "wdt_rst";
+ timeout-sec = <30>;
+ alphascale,mode = "hw";
+};
diff --git a/dts/Bindings/watchdog/meson6-wdt.txt b/dts/Bindings/watchdog/meson-wdt.txt
index 9200fc2..ae70185 100644
--- a/dts/Bindings/watchdog/meson6-wdt.txt
+++ b/dts/Bindings/watchdog/meson-wdt.txt
@@ -2,7 +2,7 @@ Meson SoCs Watchdog timer
Required properties:
-- compatible : should be "amlogic,meson6-wdt"
+- compatible : should be "amlogic,meson6-wdt" or "amlogic,meson8b-wdt"
- reg : Specifies base physical address and size of the registers.
Example:
diff --git a/dts/Bindings/watchdog/mt7621-wdt.txt b/dts/Bindings/watchdog/mt7621-wdt.txt
new file mode 100644
index 0000000..c15ef0e
--- /dev/null
+++ b/dts/Bindings/watchdog/mt7621-wdt.txt
@@ -0,0 +1,12 @@
+Ralink Watchdog Timers
+
+Required properties:
+- compatible: must be "mediatek,mt7621-wdt"
+- reg: physical base address of the controller and length of the register range
+
+Example:
+
+ watchdog@100 {
+ compatible = "mediatek,mt7621-wdt";
+ reg = <0x100 0x10>;
+ };
diff --git a/dts/Bindings/watchdog/mtk-wdt.txt b/dts/Bindings/watchdog/mtk-wdt.txt
index af9eb5b..6a00939 100644
--- a/dts/Bindings/watchdog/mtk-wdt.txt
+++ b/dts/Bindings/watchdog/mtk-wdt.txt
@@ -2,7 +2,11 @@ Mediatek SoCs Watchdog timer
Required properties:
-- compatible : should be "mediatek,mt6589-wdt"
+- compatible should contain:
+ * "mediatek,mt2701-wdt" for MT2701 compatible watchdog timers
+ * "mediatek,mt6589-wdt" for all compatible watchdog timers (MT2701,
+ MT6589)
+
- reg : Specifies base physical address and size of the registers.
Example:
diff --git a/dts/Bindings/watchdog/sigma,smp8642-wdt.txt b/dts/Bindings/watchdog/sigma,smp8642-wdt.txt
new file mode 100644
index 0000000..5b7ec2c
--- /dev/null
+++ b/dts/Bindings/watchdog/sigma,smp8642-wdt.txt
@@ -0,0 +1,18 @@
+Sigma Designs SMP86xx/SMP87xx watchdog
+
+Required properties:
+- compatible: Should be "sigma,smp8642-wdt"
+- reg: Specifies the physical address region
+- clocks: Should be a phandle to the clock
+
+Optional properties:
+- timeout-sec: watchdog timeout in seconds
+
+Example:
+
+watchdog@1fd00 {
+ compatible = "sigma,smp8642-wdt";
+ reg = <0x1fd00 8>;
+ clocks = <&xtal_in_clk>;
+ timeout-sec = <30>;
+};
diff --git a/dts/Bindings/watchdog/sp805-wdt.txt b/dts/Bindings/watchdog/sp805-wdt.txt
new file mode 100644
index 0000000..edc4f0e
--- /dev/null
+++ b/dts/Bindings/watchdog/sp805-wdt.txt
@@ -0,0 +1,31 @@
+* ARM SP805 Watchdog Timer (WDT) Controller
+
+SP805 WDT is a ARM Primecell Peripheral and has a standard-id register that
+can be used to identify the peripheral type, vendor, and revision.
+This value can be used for driver matching.
+
+As SP805 WDT is a primecell IP, it follows the base bindings specified in
+'arm/primecell.txt'
+
+Required properties:
+- compatible : Should be "arm,sp805-wdt", "arm,primecell"
+- reg : Base address and size of the watchdog timer registers.
+- clocks : From common clock binding.
+ First clock is PCLK and the second is WDOGCLK.
+ WDOGCLK can be equal to or be a sub-multiple of the PCLK frequency.
+- clock-names : From common clock binding.
+ Shall be "apb_pclk" for first clock and "wdog_clk" for the
+ second one.
+
+Optional properties:
+- interrupts : Should specify WDT interrupt number.
+
+Examples:
+
+ cluster1_core0_watchdog: wdt@c000000 {
+ compatible = "arm,sp805-wdt", "arm,primecell";
+ reg = <0x0 0xc000000 0x0 0x1000>;
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "apb_pclk", "wdog_clk";
+ };
+
diff --git a/dts/Bindings/watchdog/ts4800-wdt.txt b/dts/Bindings/watchdog/ts4800-wdt.txt
new file mode 100644
index 0000000..8f6caad
--- /dev/null
+++ b/dts/Bindings/watchdog/ts4800-wdt.txt
@@ -0,0 +1,25 @@
+Technologic Systems Watchdog
+
+Required properties:
+- compatible: must be "technologic,ts4800-wdt"
+- syscon: phandle / integer array that points to the syscon node which
+ describes the FPGA's syscon registers.
+ - phandle to FPGA's syscon
+ - offset to the watchdog register
+
+Optional property:
+- timeout-sec: contains the watchdog timeout in seconds.
+
+Example:
+
+syscon: syscon@b0010000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0xb0010000 0x3d>;
+ reg-io-width = <2>;
+
+ wdt@e {
+ compatible = "technologic,ts4800-wdt";
+ syscon = <&syscon 0xe>;
+ timeout-sec = <10>;
+ };
+}
diff --git a/dts/Bindings/watchdog/ziirave-wdt.txt b/dts/Bindings/watchdog/ziirave-wdt.txt
new file mode 100644
index 0000000..3d87818
--- /dev/null
+++ b/dts/Bindings/watchdog/ziirave-wdt.txt
@@ -0,0 +1,19 @@
+Zodiac RAVE Watchdog Timer
+
+Required properties:
+- compatible: must be "zii,rave-wdt"
+- reg: i2c slave address of device, usually 0x38
+
+Optional Properties:
+- timeout-sec: Watchdog timeout value in seconds.
+- reset-duration-ms: Duration of the pulse generated when the watchdog times
+ out. Value in milliseconds.
+
+Example:
+
+ watchdog@38 {
+ compatible = "zii,rave-wdt";
+ reg = <0x38>;
+ timeout-sec = <30>;
+ reset-duration-ms = <30>;
+ };
diff --git a/dts/include/dt-bindings/clock/bcm2835-aux.h b/dts/include/dt-bindings/clock/bcm2835-aux.h
new file mode 100644
index 0000000..d91156e
--- /dev/null
+++ b/dts/include/dt-bindings/clock/bcm2835-aux.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define BCM2835_AUX_CLOCK_UART 0
+#define BCM2835_AUX_CLOCK_SPI1 1
+#define BCM2835_AUX_CLOCK_SPI2 2
+#define BCM2835_AUX_CLOCK_COUNT 3
diff --git a/dts/include/dt-bindings/clock/bcm2835.h b/dts/include/dt-bindings/clock/bcm2835.h
index d323efa..61f1d20 100644
--- a/dts/include/dt-bindings/clock/bcm2835.h
+++ b/dts/include/dt-bindings/clock/bcm2835.h
@@ -43,5 +43,6 @@
#define BCM2835_CLOCK_TSENS 27
#define BCM2835_CLOCK_EMMC 28
#define BCM2835_CLOCK_PERI_IMAGE 29
+#define BCM2835_CLOCK_PWM 30
-#define BCM2835_CLOCK_COUNT 30
+#define BCM2835_CLOCK_COUNT 31
diff --git a/dts/include/dt-bindings/clock/exynos4.h b/dts/include/dt-bindings/clock/exynos4.h
index c4b1676..c40111f 100644
--- a/dts/include/dt-bindings/clock/exynos4.h
+++ b/dts/include/dt-bindings/clock/exynos4.h
@@ -93,6 +93,7 @@
#define CLK_SCLK_FIMG2D 177
/* gate clocks */
+#define CLK_SSS 255
#define CLK_FIMC0 256
#define CLK_FIMC1 257
#define CLK_FIMC2 258
diff --git a/dts/include/dt-bindings/clock/exynos5420.h b/dts/include/dt-bindings/clock/exynos5420.h
index 99da0d1..7699ee9 100644
--- a/dts/include/dt-bindings/clock/exynos5420.h
+++ b/dts/include/dt-bindings/clock/exynos5420.h
@@ -25,6 +25,8 @@
#define CLK_FOUT_MPLL 10
#define CLK_FOUT_BPLL 11
#define CLK_FOUT_KPLL 12
+#define CLK_ARM_CLK 13
+#define CLK_KFC_CLK 14
/* gate for special clocks (sclk) */
#define CLK_SCLK_UART0 128
@@ -210,6 +212,8 @@
#define CLK_MOUT_SW_ACLK300 649
#define CLK_MOUT_USER_ACLK400_DISP1 650
#define CLK_MOUT_SW_ACLK400 651
+#define CLK_MOUT_USER_ACLK300_GSCL 652
+#define CLK_MOUT_SW_ACLK300_GSCL 653
/* divider clocks */
#define CLK_DOUT_PIXEL 768
diff --git a/dts/include/dt-bindings/clock/imx7d-clock.h b/dts/include/dt-bindings/clock/imx7d-clock.h
index a4a7a9c..edca898 100644
--- a/dts/include/dt-bindings/clock/imx7d-clock.h
+++ b/dts/include/dt-bindings/clock/imx7d-clock.h
@@ -447,5 +447,6 @@
#define IMX7D_SEMA4_HS_ROOT_CLK 434
#define IMX7D_PLL_DRAM_TEST_DIV 435
#define IMX7D_ADC_ROOT_CLK 436
-#define IMX7D_CLK_END 437
+#define IMX7D_CLK_ARM 437
+#define IMX7D_CLK_END 438
#endif /* __DT_BINDINGS_CLOCK_IMX7D_H */
diff --git a/dts/include/dt-bindings/clock/lpc32xx-clock.h b/dts/include/dt-bindings/clock/lpc32xx-clock.h
new file mode 100644
index 0000000..bcb1c9a
--- /dev/null
+++ b/dts/include/dt-bindings/clock/lpc32xx-clock.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright (c) 2015 Vladimir Zapolskiy <vz@mleia.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+#ifndef __DT_BINDINGS_LPC32XX_CLOCK_H
+#define __DT_BINDINGS_LPC32XX_CLOCK_H
+
+/* LPC32XX System Control Block clocks */
+#define LPC32XX_CLK_RTC 1
+#define LPC32XX_CLK_DMA 2
+#define LPC32XX_CLK_MLC 3
+#define LPC32XX_CLK_SLC 4
+#define LPC32XX_CLK_LCD 5
+#define LPC32XX_CLK_MAC 6
+#define LPC32XX_CLK_SD 7
+#define LPC32XX_CLK_DDRAM 8
+#define LPC32XX_CLK_SSP0 9
+#define LPC32XX_CLK_SSP1 10
+#define LPC32XX_CLK_UART3 11
+#define LPC32XX_CLK_UART4 12
+#define LPC32XX_CLK_UART5 13
+#define LPC32XX_CLK_UART6 14
+#define LPC32XX_CLK_IRDA 15
+#define LPC32XX_CLK_I2C1 16
+#define LPC32XX_CLK_I2C2 17
+#define LPC32XX_CLK_TIMER0 18
+#define LPC32XX_CLK_TIMER1 19
+#define LPC32XX_CLK_TIMER2 20
+#define LPC32XX_CLK_TIMER3 21
+#define LPC32XX_CLK_TIMER4 22
+#define LPC32XX_CLK_TIMER5 23
+#define LPC32XX_CLK_WDOG 24
+#define LPC32XX_CLK_I2S0 25
+#define LPC32XX_CLK_I2S1 26
+#define LPC32XX_CLK_SPI1 27
+#define LPC32XX_CLK_SPI2 28
+#define LPC32XX_CLK_MCPWM 29
+#define LPC32XX_CLK_HSTIMER 30
+#define LPC32XX_CLK_KEY 31
+#define LPC32XX_CLK_PWM1 32
+#define LPC32XX_CLK_PWM2 33
+#define LPC32XX_CLK_ADC 34
+
+/* LPC32XX USB clocks */
+#define LPC32XX_USB_CLK_I2C 1
+#define LPC32XX_USB_CLK_DEVICE 2
+#define LPC32XX_USB_CLK_HOST 3
+
+#endif /* __DT_BINDINGS_LPC32XX_CLOCK_H */
diff --git a/dts/include/dt-bindings/clock/qcom,gcc-msm8996.h b/dts/include/dt-bindings/clock/qcom,gcc-msm8996.h
new file mode 100644
index 0000000..888e75c
--- /dev/null
+++ b/dts/include/dt-bindings/clock/qcom,gcc-msm8996.h
@@ -0,0 +1,339 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_MSM_GCC_8996_H
+#define _DT_BINDINGS_CLK_MSM_GCC_8996_H
+
+#define GPLL0_EARLY 0
+#define GPLL0 1
+#define GPLL1_EARLY 2
+#define GPLL1 3
+#define GPLL2_EARLY 4
+#define GPLL2 5
+#define GPLL3_EARLY 6
+#define GPLL3 7
+#define GPLL4_EARLY 8
+#define GPLL4 9
+#define SYSTEM_NOC_CLK_SRC 10
+#define CONFIG_NOC_CLK_SRC 11
+#define PERIPH_NOC_CLK_SRC 12
+#define MMSS_BIMC_GFX_CLK_SRC 13
+#define USB30_MASTER_CLK_SRC 14
+#define USB30_MOCK_UTMI_CLK_SRC 15
+#define USB3_PHY_AUX_CLK_SRC 16
+#define USB20_MASTER_CLK_SRC 17
+#define USB20_MOCK_UTMI_CLK_SRC 18
+#define SDCC1_APPS_CLK_SRC 19
+#define SDCC1_ICE_CORE_CLK_SRC 20
+#define SDCC2_APPS_CLK_SRC 21
+#define SDCC3_APPS_CLK_SRC 22
+#define SDCC4_APPS_CLK_SRC 23
+#define BLSP1_QUP1_SPI_APPS_CLK_SRC 24
+#define BLSP1_QUP1_I2C_APPS_CLK_SRC 25
+#define BLSP1_UART1_APPS_CLK_SRC 26
+#define BLSP1_QUP2_SPI_APPS_CLK_SRC 27
+#define BLSP1_QUP2_I2C_APPS_CLK_SRC 28
+#define BLSP1_UART2_APPS_CLK_SRC 29
+#define BLSP1_QUP3_SPI_APPS_CLK_SRC 30
+#define BLSP1_QUP3_I2C_APPS_CLK_SRC 31
+#define BLSP1_UART3_APPS_CLK_SRC 32
+#define BLSP1_QUP4_SPI_APPS_CLK_SRC 33
+#define BLSP1_QUP4_I2C_APPS_CLK_SRC 34
+#define BLSP1_UART4_APPS_CLK_SRC 35
+#define BLSP1_QUP5_SPI_APPS_CLK_SRC 36
+#define BLSP1_QUP5_I2C_APPS_CLK_SRC 37
+#define BLSP1_UART5_APPS_CLK_SRC 38
+#define BLSP1_QUP6_SPI_APPS_CLK_SRC 39
+#define BLSP1_QUP6_I2C_APPS_CLK_SRC 40
+#define BLSP1_UART6_APPS_CLK_SRC 41
+#define BLSP2_QUP1_SPI_APPS_CLK_SRC 42
+#define BLSP2_QUP1_I2C_APPS_CLK_SRC 43
+#define BLSP2_UART1_APPS_CLK_SRC 44
+#define BLSP2_QUP2_SPI_APPS_CLK_SRC 45
+#define BLSP2_QUP2_I2C_APPS_CLK_SRC 46
+#define BLSP2_UART2_APPS_CLK_SRC 47
+#define BLSP2_QUP3_SPI_APPS_CLK_SRC 48
+#define BLSP2_QUP3_I2C_APPS_CLK_SRC 49
+#define BLSP2_UART3_APPS_CLK_SRC 50
+#define BLSP2_QUP4_SPI_APPS_CLK_SRC 51
+#define BLSP2_QUP4_I2C_APPS_CLK_SRC 52
+#define BLSP2_UART4_APPS_CLK_SRC 53
+#define BLSP2_QUP5_SPI_APPS_CLK_SRC 54
+#define BLSP2_QUP5_I2C_APPS_CLK_SRC 55
+#define BLSP2_UART5_APPS_CLK_SRC 56
+#define BLSP2_QUP6_SPI_APPS_CLK_SRC 57
+#define BLSP2_QUP6_I2C_APPS_CLK_SRC 58
+#define BLSP2_UART6_APPS_CLK_SRC 59
+#define PDM2_CLK_SRC 60
+#define TSIF_REF_CLK_SRC 61
+#define CE1_CLK_SRC 62
+#define GCC_SLEEP_CLK_SRC 63
+#define BIMC_CLK_SRC 64
+#define HMSS_AHB_CLK_SRC 65
+#define BIMC_HMSS_AXI_CLK_SRC 66
+#define HMSS_RBCPR_CLK_SRC 67
+#define HMSS_GPLL0_CLK_SRC 68
+#define GP1_CLK_SRC 69
+#define GP2_CLK_SRC 70
+#define GP3_CLK_SRC 71
+#define PCIE_AUX_CLK_SRC 72
+#define UFS_AXI_CLK_SRC 73
+#define UFS_ICE_CORE_CLK_SRC 74
+#define QSPI_SER_CLK_SRC 75
+#define GCC_SYS_NOC_AXI_CLK 76
+#define GCC_SYS_NOC_HMSS_AHB_CLK 77
+#define GCC_SNOC_CNOC_AHB_CLK 78
+#define GCC_SNOC_PNOC_AHB_CLK 79
+#define GCC_SYS_NOC_AT_CLK 80
+#define GCC_SYS_NOC_USB3_AXI_CLK 81
+#define GCC_SYS_NOC_UFS_AXI_CLK 82
+#define GCC_CFG_NOC_AHB_CLK 83
+#define GCC_PERIPH_NOC_AHB_CLK 84
+#define GCC_PERIPH_NOC_USB20_AHB_CLK 85
+#define GCC_TIC_CLK 86
+#define GCC_IMEM_AXI_CLK 87
+#define GCC_MMSS_SYS_NOC_AXI_CLK 88
+#define GCC_MMSS_NOC_CFG_AHB_CLK 89
+#define GCC_MMSS_BIMC_GFX_CLK 90
+#define GCC_USB30_MASTER_CLK 91
+#define GCC_USB30_SLEEP_CLK 92
+#define GCC_USB30_MOCK_UTMI_CLK 93
+#define GCC_USB3_PHY_AUX_CLK 94
+#define GCC_USB3_PHY_PIPE_CLK 95
+#define GCC_USB20_MASTER_CLK 96
+#define GCC_USB20_SLEEP_CLK 97
+#define GCC_USB20_MOCK_UTMI_CLK 98
+#define GCC_USB_PHY_CFG_AHB2PHY_CLK 99
+#define GCC_SDCC1_APPS_CLK 100
+#define GCC_SDCC1_AHB_CLK 101
+#define GCC_SDCC1_ICE_CORE_CLK 102
+#define GCC_SDCC2_APPS_CLK 103
+#define GCC_SDCC2_AHB_CLK 104
+#define GCC_SDCC3_APPS_CLK 105
+#define GCC_SDCC3_AHB_CLK 106
+#define GCC_SDCC4_APPS_CLK 107
+#define GCC_SDCC4_AHB_CLK 108
+#define GCC_BLSP1_AHB_CLK 109
+#define GCC_BLSP1_SLEEP_CLK 110
+#define GCC_BLSP1_QUP1_SPI_APPS_CLK 111
+#define GCC_BLSP1_QUP1_I2C_APPS_CLK 112
+#define GCC_BLSP1_UART1_APPS_CLK 113
+#define GCC_BLSP1_QUP2_SPI_APPS_CLK 114
+#define GCC_BLSP1_QUP2_I2C_APPS_CLK 115
+#define GCC_BLSP1_UART2_APPS_CLK 116
+#define GCC_BLSP1_QUP3_SPI_APPS_CLK 117
+#define GCC_BLSP1_QUP3_I2C_APPS_CLK 118
+#define GCC_BLSP1_UART3_APPS_CLK 119
+#define GCC_BLSP1_QUP4_SPI_APPS_CLK 120
+#define GCC_BLSP1_QUP4_I2C_APPS_CLK 121
+#define GCC_BLSP1_UART4_APPS_CLK 122
+#define GCC_BLSP1_QUP5_SPI_APPS_CLK 123
+#define GCC_BLSP1_QUP5_I2C_APPS_CLK 124
+#define GCC_BLSP1_UART5_APPS_CLK 125
+#define GCC_BLSP1_QUP6_SPI_APPS_CLK 126
+#define GCC_BLSP1_QUP6_I2C_APPS_CLK 127
+#define GCC_BLSP1_UART6_APPS_CLK 128
+#define GCC_BLSP2_AHB_CLK 129
+#define GCC_BLSP2_SLEEP_CLK 130
+#define GCC_BLSP2_QUP1_SPI_APPS_CLK 131
+#define GCC_BLSP2_QUP1_I2C_APPS_CLK 132
+#define GCC_BLSP2_UART1_APPS_CLK 133
+#define GCC_BLSP2_QUP2_SPI_APPS_CLK 134
+#define GCC_BLSP2_QUP2_I2C_APPS_CLK 135
+#define GCC_BLSP2_UART2_APPS_CLK 136
+#define GCC_BLSP2_QUP3_SPI_APPS_CLK 137
+#define GCC_BLSP2_QUP3_I2C_APPS_CLK 138
+#define GCC_BLSP2_UART3_APPS_CLK 139
+#define GCC_BLSP2_QUP4_SPI_APPS_CLK 140
+#define GCC_BLSP2_QUP4_I2C_APPS_CLK 141
+#define GCC_BLSP2_UART4_APPS_CLK 142
+#define GCC_BLSP2_QUP5_SPI_APPS_CLK 143
+#define GCC_BLSP2_QUP5_I2C_APPS_CLK 144
+#define GCC_BLSP2_UART5_APPS_CLK 145
+#define GCC_BLSP2_QUP6_SPI_APPS_CLK 146
+#define GCC_BLSP2_QUP6_I2C_APPS_CLK 147
+#define GCC_BLSP2_UART6_APPS_CLK 148
+#define GCC_PDM_AHB_CLK 149
+#define GCC_PDM_XO4_CLK 150
+#define GCC_PDM2_CLK 151
+#define GCC_PRNG_AHB_CLK 152
+#define GCC_TSIF_AHB_CLK 153
+#define GCC_TSIF_REF_CLK 154
+#define GCC_TSIF_INACTIVITY_TIMERS_CLK 155
+#define GCC_TCSR_AHB_CLK 156
+#define GCC_BOOT_ROM_AHB_CLK 157
+#define GCC_MSG_RAM_AHB_CLK 158
+#define GCC_TLMM_AHB_CLK 159
+#define GCC_TLMM_CLK 160
+#define GCC_MPM_AHB_CLK 161
+#define GCC_SPMI_SER_CLK 162
+#define GCC_SPMI_CNOC_AHB_CLK 163
+#define GCC_CE1_CLK 164
+#define GCC_CE1_AXI_CLK 165
+#define GCC_CE1_AHB_CLK 166
+#define GCC_BIMC_HMSS_AXI_CLK 167
+#define GCC_BIMC_GFX_CLK 168
+#define GCC_HMSS_AHB_CLK 169
+#define GCC_HMSS_SLV_AXI_CLK 170
+#define GCC_HMSS_MSTR_AXI_CLK 171
+#define GCC_HMSS_RBCPR_CLK 172
+#define GCC_GP1_CLK 173
+#define GCC_GP2_CLK 174
+#define GCC_GP3_CLK 175
+#define GCC_PCIE_0_SLV_AXI_CLK 176
+#define GCC_PCIE_0_MSTR_AXI_CLK 177
+#define GCC_PCIE_0_CFG_AHB_CLK 178
+#define GCC_PCIE_0_AUX_CLK 179
+#define GCC_PCIE_0_PIPE_CLK 180
+#define GCC_PCIE_1_SLV_AXI_CLK 181
+#define GCC_PCIE_1_MSTR_AXI_CLK 182
+#define GCC_PCIE_1_CFG_AHB_CLK 183
+#define GCC_PCIE_1_AUX_CLK 184
+#define GCC_PCIE_1_PIPE_CLK 185
+#define GCC_PCIE_2_SLV_AXI_CLK 186
+#define GCC_PCIE_2_MSTR_AXI_CLK 187
+#define GCC_PCIE_2_CFG_AHB_CLK 188
+#define GCC_PCIE_2_AUX_CLK 189
+#define GCC_PCIE_2_PIPE_CLK 190
+#define GCC_PCIE_PHY_CFG_AHB_CLK 191
+#define GCC_PCIE_PHY_AUX_CLK 192
+#define GCC_UFS_AXI_CLK 193
+#define GCC_UFS_AHB_CLK 194
+#define GCC_UFS_TX_CFG_CLK 195
+#define GCC_UFS_RX_CFG_CLK 196
+#define GCC_UFS_TX_SYMBOL_0_CLK 197
+#define GCC_UFS_RX_SYMBOL_0_CLK 198
+#define GCC_UFS_RX_SYMBOL_1_CLK 199
+#define GCC_UFS_UNIPRO_CORE_CLK 200
+#define GCC_UFS_ICE_CORE_CLK 201
+#define GCC_UFS_SYS_CLK_CORE_CLK 202
+#define GCC_UFS_TX_SYMBOL_CLK_CORE_CLK 203
+#define GCC_AGGRE0_SNOC_AXI_CLK 204
+#define GCC_AGGRE0_CNOC_AHB_CLK 205
+#define GCC_SMMU_AGGRE0_AXI_CLK 206
+#define GCC_SMMU_AGGRE0_AHB_CLK 207
+#define GCC_AGGRE1_PNOC_AHB_CLK 208
+#define GCC_AGGRE2_UFS_AXI_CLK 209
+#define GCC_AGGRE2_USB3_AXI_CLK 210
+#define GCC_QSPI_AHB_CLK 211
+#define GCC_QSPI_SER_CLK 212
+#define GCC_USB3_CLKREF_CLK 213
+#define GCC_HDMI_CLKREF_CLK 214
+#define GCC_UFS_CLKREF_CLK 215
+#define GCC_PCIE_CLKREF_CLK 216
+#define GCC_RX2_USB2_CLKREF_CLK 217
+#define GCC_RX1_USB2_CLKREF_CLK 218
+
+#define GCC_SYSTEM_NOC_BCR 0
+#define GCC_CONFIG_NOC_BCR 1
+#define GCC_PERIPH_NOC_BCR 2
+#define GCC_IMEM_BCR 3
+#define GCC_MMSS_BCR 4
+#define GCC_PIMEM_BCR 5
+#define GCC_QDSS_BCR 6
+#define GCC_USB_30_BCR 7
+#define GCC_USB_20_BCR 8
+#define GCC_QUSB2PHY_PRIM_BCR 9
+#define GCC_QUSB2PHY_SEC_BCR 10
+#define GCC_USB_PHY_CFG_AHB2PHY_BCR 11
+#define GCC_SDCC1_BCR 12
+#define GCC_SDCC2_BCR 13
+#define GCC_SDCC3_BCR 14
+#define GCC_SDCC4_BCR 15
+#define GCC_BLSP1_BCR 16
+#define GCC_BLSP1_QUP1_BCR 17
+#define GCC_BLSP1_UART1_BCR 18
+#define GCC_BLSP1_QUP2_BCR 19
+#define GCC_BLSP1_UART2_BCR 20
+#define GCC_BLSP1_QUP3_BCR 21
+#define GCC_BLSP1_UART3_BCR 22
+#define GCC_BLSP1_QUP4_BCR 23
+#define GCC_BLSP1_UART4_BCR 24
+#define GCC_BLSP1_QUP5_BCR 25
+#define GCC_BLSP1_UART5_BCR 26
+#define GCC_BLSP1_QUP6_BCR 27
+#define GCC_BLSP1_UART6_BCR 28
+#define GCC_BLSP2_BCR 29
+#define GCC_BLSP2_QUP1_BCR 30
+#define GCC_BLSP2_UART1_BCR 31
+#define GCC_BLSP2_QUP2_BCR 32
+#define GCC_BLSP2_UART2_BCR 33
+#define GCC_BLSP2_QUP3_BCR 34
+#define GCC_BLSP2_UART3_BCR 35
+#define GCC_BLSP2_QUP4_BCR 36
+#define GCC_BLSP2_UART4_BCR 37
+#define GCC_BLSP2_QUP5_BCR 38
+#define GCC_BLSP2_UART5_BCR 39
+#define GCC_BLSP2_QUP6_BCR 40
+#define GCC_BLSP2_UART6_BCR 41
+#define GCC_PDM_BCR 42
+#define GCC_PRNG_BCR 43
+#define GCC_TSIF_BCR 44
+#define GCC_TCSR_BCR 45
+#define GCC_BOOT_ROM_BCR 46
+#define GCC_MSG_RAM_BCR 47
+#define GCC_TLMM_BCR 48
+#define GCC_MPM_BCR 49
+#define GCC_SEC_CTRL_BCR 50
+#define GCC_SPMI_BCR 51
+#define GCC_SPDM_BCR 52
+#define GCC_CE1_BCR 53
+#define GCC_BIMC_BCR 54
+#define GCC_SNOC_BUS_TIMEOUT0_BCR 55
+#define GCC_SNOC_BUS_TIMEOUT2_BCR 56
+#define GCC_SNOC_BUS_TIMEOUT1_BCR 57
+#define GCC_SNOC_BUS_TIMEOUT3_BCR 58
+#define GCC_SNOC_BUS_TIMEOUT_EXTREF_BCR 59
+#define GCC_PNOC_BUS_TIMEOUT0_BCR 60
+#define GCC_PNOC_BUS_TIMEOUT1_BCR 61
+#define GCC_PNOC_BUS_TIMEOUT2_BCR 62
+#define GCC_PNOC_BUS_TIMEOUT3_BCR 63
+#define GCC_PNOC_BUS_TIMEOUT4_BCR 64
+#define GCC_CNOC_BUS_TIMEOUT0_BCR 65
+#define GCC_CNOC_BUS_TIMEOUT1_BCR 66
+#define GCC_CNOC_BUS_TIMEOUT2_BCR 67
+#define GCC_CNOC_BUS_TIMEOUT3_BCR 68
+#define GCC_CNOC_BUS_TIMEOUT4_BCR 69
+#define GCC_CNOC_BUS_TIMEOUT5_BCR 70
+#define GCC_CNOC_BUS_TIMEOUT6_BCR 71
+#define GCC_CNOC_BUS_TIMEOUT7_BCR 72
+#define GCC_CNOC_BUS_TIMEOUT8_BCR 73
+#define GCC_CNOC_BUS_TIMEOUT9_BCR 74
+#define GCC_CNOC_BUS_TIMEOUT_EXTREF_BCR 75
+#define GCC_APB2JTAG_BCR 76
+#define GCC_RBCPR_CX_BCR 77
+#define GCC_RBCPR_MX_BCR 78
+#define GCC_PCIE_0_BCR 79
+#define GCC_PCIE_0_PHY_BCR 80
+#define GCC_PCIE_1_BCR 81
+#define GCC_PCIE_1_PHY_BCR 82
+#define GCC_PCIE_2_BCR 83
+#define GCC_PCIE_2_PHY_BCR 84
+#define GCC_PCIE_PHY_BCR 85
+#define GCC_DCD_BCR 86
+#define GCC_OBT_ODT_BCR 87
+#define GCC_UFS_BCR 88
+#define GCC_SSC_BCR 89
+#define GCC_VS_BCR 90
+#define GCC_AGGRE0_NOC_BCR 91
+#define GCC_AGGRE1_NOC_BCR 92
+#define GCC_AGGRE2_NOC_BCR 93
+#define GCC_DCC_BCR 94
+#define GCC_IPA_BCR 95
+#define GCC_QSPI_BCR 96
+#define GCC_SKL_BCR 97
+#define GCC_MSMPU_BCR 98
+#define GCC_MSS_Q6_BCR 99
+#define GCC_QREFS_VBG_CAL_BCR 100
+
+#endif
diff --git a/dts/include/dt-bindings/clock/qcom,mmcc-msm8996.h b/dts/include/dt-bindings/clock/qcom,mmcc-msm8996.h
new file mode 100644
index 0000000..9b81ca6
--- /dev/null
+++ b/dts/include/dt-bindings/clock/qcom,mmcc-msm8996.h
@@ -0,0 +1,285 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_MSM_MMCC_8996_H
+#define _DT_BINDINGS_CLK_MSM_MMCC_8996_H
+
+#define MMPLL0_EARLY 0
+#define MMPLL0_PLL 1
+#define MMPLL1_EARLY 2
+#define MMPLL1_PLL 3
+#define MMPLL2_EARLY 4
+#define MMPLL2_PLL 5
+#define MMPLL3_EARLY 6
+#define MMPLL3_PLL 7
+#define MMPLL4_EARLY 8
+#define MMPLL4_PLL 9
+#define MMPLL5_EARLY 10
+#define MMPLL5_PLL 11
+#define MMPLL8_EARLY 12
+#define MMPLL8_PLL 13
+#define MMPLL9_EARLY 14
+#define MMPLL9_PLL 15
+#define AHB_CLK_SRC 16
+#define AXI_CLK_SRC 17
+#define MAXI_CLK_SRC 18
+#define DSA_CORE_CLK_SRC 19
+#define GFX3D_CLK_SRC 20
+#define RBBMTIMER_CLK_SRC 21
+#define ISENSE_CLK_SRC 22
+#define RBCPR_CLK_SRC 23
+#define VIDEO_CORE_CLK_SRC 24
+#define VIDEO_SUBCORE0_CLK_SRC 25
+#define VIDEO_SUBCORE1_CLK_SRC 26
+#define PCLK0_CLK_SRC 27
+#define PCLK1_CLK_SRC 28
+#define MDP_CLK_SRC 29
+#define EXTPCLK_CLK_SRC 30
+#define VSYNC_CLK_SRC 31
+#define HDMI_CLK_SRC 32
+#define BYTE0_CLK_SRC 33
+#define BYTE1_CLK_SRC 34
+#define ESC0_CLK_SRC 35
+#define ESC1_CLK_SRC 36
+#define CAMSS_GP0_CLK_SRC 37
+#define CAMSS_GP1_CLK_SRC 38
+#define MCLK0_CLK_SRC 39
+#define MCLK1_CLK_SRC 40
+#define MCLK2_CLK_SRC 41
+#define MCLK3_CLK_SRC 42
+#define CCI_CLK_SRC 43
+#define CSI0PHYTIMER_CLK_SRC 44
+#define CSI1PHYTIMER_CLK_SRC 45
+#define CSI2PHYTIMER_CLK_SRC 46
+#define CSIPHY0_3P_CLK_SRC 47
+#define CSIPHY1_3P_CLK_SRC 48
+#define CSIPHY2_3P_CLK_SRC 49
+#define JPEG0_CLK_SRC 50
+#define JPEG2_CLK_SRC 51
+#define JPEG_DMA_CLK_SRC 52
+#define VFE0_CLK_SRC 53
+#define VFE1_CLK_SRC 54
+#define CPP_CLK_SRC 55
+#define CSI0_CLK_SRC 56
+#define CSI1_CLK_SRC 57
+#define CSI2_CLK_SRC 58
+#define CSI3_CLK_SRC 59
+#define FD_CORE_CLK_SRC 60
+#define MMSS_CXO_CLK 61
+#define MMSS_SLEEPCLK_CLK 62
+#define MMSS_MMAGIC_AHB_CLK 63
+#define MMSS_MMAGIC_CFG_AHB_CLK 64
+#define MMSS_MISC_AHB_CLK 65
+#define MMSS_MISC_CXO_CLK 66
+#define MMSS_BTO_AHB_CLK 67
+#define MMSS_MMAGIC_AXI_CLK 68
+#define MMSS_S0_AXI_CLK 69
+#define MMSS_MMAGIC_MAXI_CLK 70
+#define DSA_CORE_CLK 71
+#define DSA_NOC_CFG_AHB_CLK 72
+#define MMAGIC_CAMSS_AXI_CLK 73
+#define MMAGIC_CAMSS_NOC_CFG_AHB_CLK 74
+#define THROTTLE_CAMSS_CXO_CLK 75
+#define THROTTLE_CAMSS_AHB_CLK 76
+#define THROTTLE_CAMSS_AXI_CLK 77
+#define SMMU_VFE_AHB_CLK 78
+#define SMMU_VFE_AXI_CLK 79
+#define SMMU_CPP_AHB_CLK 80
+#define SMMU_CPP_AXI_CLK 81
+#define SMMU_JPEG_AHB_CLK 82
+#define SMMU_JPEG_AXI_CLK 83
+#define MMAGIC_MDSS_AXI_CLK 84
+#define MMAGIC_MDSS_NOC_CFG_AHB_CLK 85
+#define THROTTLE_MDSS_CXO_CLK 86
+#define THROTTLE_MDSS_AHB_CLK 87
+#define THROTTLE_MDSS_AXI_CLK 88
+#define SMMU_ROT_AHB_CLK 89
+#define SMMU_ROT_AXI_CLK 90
+#define SMMU_MDP_AHB_CLK 91
+#define SMMU_MDP_AXI_CLK 92
+#define MMAGIC_VIDEO_AXI_CLK 93
+#define MMAGIC_VIDEO_NOC_CFG_AHB_CLK 94
+#define THROTTLE_VIDEO_CXO_CLK 95
+#define THROTTLE_VIDEO_AHB_CLK 96
+#define THROTTLE_VIDEO_AXI_CLK 97
+#define SMMU_VIDEO_AHB_CLK 98
+#define SMMU_VIDEO_AXI_CLK 99
+#define MMAGIC_BIMC_AXI_CLK 100
+#define MMAGIC_BIMC_NOC_CFG_AHB_CLK 101
+#define GPU_GX_GFX3D_CLK 102
+#define GPU_GX_RBBMTIMER_CLK 103
+#define GPU_AHB_CLK 104
+#define GPU_AON_ISENSE_CLK 105
+#define VMEM_MAXI_CLK 106
+#define VMEM_AHB_CLK 107
+#define MMSS_RBCPR_CLK 108
+#define MMSS_RBCPR_AHB_CLK 109
+#define VIDEO_CORE_CLK 110
+#define VIDEO_AXI_CLK 111
+#define VIDEO_MAXI_CLK 112
+#define VIDEO_AHB_CLK 113
+#define VIDEO_SUBCORE0_CLK 114
+#define VIDEO_SUBCORE1_CLK 115
+#define MDSS_AHB_CLK 116
+#define MDSS_HDMI_AHB_CLK 117
+#define MDSS_AXI_CLK 118
+#define MDSS_PCLK0_CLK 119
+#define MDSS_PCLK1_CLK 120
+#define MDSS_MDP_CLK 121
+#define MDSS_EXTPCLK_CLK 122
+#define MDSS_VSYNC_CLK 123
+#define MDSS_HDMI_CLK 124
+#define MDSS_BYTE0_CLK 125
+#define MDSS_BYTE1_CLK 126
+#define MDSS_ESC0_CLK 127
+#define MDSS_ESC1_CLK 128
+#define CAMSS_TOP_AHB_CLK 129
+#define CAMSS_AHB_CLK 130
+#define CAMSS_MICRO_AHB_CLK 131
+#define CAMSS_GP0_CLK 132
+#define CAMSS_GP1_CLK 133
+#define CAMSS_MCLK0_CLK 134
+#define CAMSS_MCLK1_CLK 135
+#define CAMSS_MCLK2_CLK 136
+#define CAMSS_MCLK3_CLK 137
+#define CAMSS_CCI_CLK 138
+#define CAMSS_CCI_AHB_CLK 139
+#define CAMSS_CSI0PHYTIMER_CLK 140
+#define CAMSS_CSI1PHYTIMER_CLK 141
+#define CAMSS_CSI2PHYTIMER_CLK 142
+#define CAMSS_CSIPHY0_3P_CLK 143
+#define CAMSS_CSIPHY1_3P_CLK 144
+#define CAMSS_CSIPHY2_3P_CLK 145
+#define CAMSS_JPEG0_CLK 146
+#define CAMSS_JPEG2_CLK 147
+#define CAMSS_JPEG_DMA_CLK 148
+#define CAMSS_JPEG_AHB_CLK 149
+#define CAMSS_JPEG_AXI_CLK 150
+#define CAMSS_VFE_AHB_CLK 151
+#define CAMSS_VFE_AXI_CLK 152
+#define CAMSS_VFE0_CLK 153
+#define CAMSS_VFE0_STREAM_CLK 154
+#define CAMSS_VFE0_AHB_CLK 155
+#define CAMSS_VFE1_CLK 156
+#define CAMSS_VFE1_STREAM_CLK 157
+#define CAMSS_VFE1_AHB_CLK 158
+#define CAMSS_CSI_VFE0_CLK 159
+#define CAMSS_CSI_VFE1_CLK 160
+#define CAMSS_CPP_VBIF_AHB_CLK 161
+#define CAMSS_CPP_AXI_CLK 162
+#define CAMSS_CPP_CLK 163
+#define CAMSS_CPP_AHB_CLK 164
+#define CAMSS_CSI0_CLK 165
+#define CAMSS_CSI0_AHB_CLK 166
+#define CAMSS_CSI0PHY_CLK 167
+#define CAMSS_CSI0RDI_CLK 168
+#define CAMSS_CSI0PIX_CLK 169
+#define CAMSS_CSI1_CLK 170
+#define CAMSS_CSI1_AHB_CLK 171
+#define CAMSS_CSI1PHY_CLK 172
+#define CAMSS_CSI1RDI_CLK 173
+#define CAMSS_CSI1PIX_CLK 174
+#define CAMSS_CSI2_CLK 175
+#define CAMSS_CSI2_AHB_CLK 176
+#define CAMSS_CSI2PHY_CLK 177
+#define CAMSS_CSI2RDI_CLK 178
+#define CAMSS_CSI2PIX_CLK 179
+#define CAMSS_CSI3_CLK 180
+#define CAMSS_CSI3_AHB_CLK 181
+#define CAMSS_CSI3PHY_CLK 182
+#define CAMSS_CSI3RDI_CLK 183
+#define CAMSS_CSI3PIX_CLK 184
+#define CAMSS_ISPIF_AHB_CLK 185
+#define FD_CORE_CLK 186
+#define FD_CORE_UAR_CLK 187
+#define FD_AHB_CLK 188
+#define MMSS_SPDM_CSI0_CLK 189
+#define MMSS_SPDM_JPEG_DMA_CLK 190
+#define MMSS_SPDM_CPP_CLK 191
+#define MMSS_SPDM_PCLK0_CLK 192
+#define MMSS_SPDM_AHB_CLK 193
+#define MMSS_SPDM_GFX3D_CLK 194
+#define MMSS_SPDM_PCLK1_CLK 195
+#define MMSS_SPDM_JPEG2_CLK 196
+#define MMSS_SPDM_DEBUG_CLK 197
+#define MMSS_SPDM_VFE1_CLK 198
+#define MMSS_SPDM_VFE0_CLK 199
+#define MMSS_SPDM_VIDEO_CORE_CLK 200
+#define MMSS_SPDM_AXI_CLK 201
+#define MMSS_SPDM_MDP_CLK 202
+#define MMSS_SPDM_JPEG0_CLK 203
+#define MMSS_SPDM_RM_AXI_CLK 204
+#define MMSS_SPDM_RM_MAXI_CLK 205
+
+#define MMAGICAHB_BCR 0
+#define MMAGIC_CFG_BCR 1
+#define MISC_BCR 2
+#define BTO_BCR 3
+#define MMAGICAXI_BCR 4
+#define MMAGICMAXI_BCR 5
+#define DSA_BCR 6
+#define MMAGIC_CAMSS_BCR 7
+#define THROTTLE_CAMSS_BCR 8
+#define SMMU_VFE_BCR 9
+#define SMMU_CPP_BCR 10
+#define SMMU_JPEG_BCR 11
+#define MMAGIC_MDSS_BCR 12
+#define THROTTLE_MDSS_BCR 13
+#define SMMU_ROT_BCR 14
+#define SMMU_MDP_BCR 15
+#define MMAGIC_VIDEO_BCR 16
+#define THROTTLE_VIDEO_BCR 17
+#define SMMU_VIDEO_BCR 18
+#define MMAGIC_BIMC_BCR 19
+#define GPU_GX_BCR 20
+#define GPU_BCR 21
+#define GPU_AON_BCR 22
+#define VMEM_BCR 23
+#define MMSS_RBCPR_BCR 24
+#define VIDEO_BCR 25
+#define MDSS_BCR 26
+#define CAMSS_TOP_BCR 27
+#define CAMSS_AHB_BCR 28
+#define CAMSS_MICRO_BCR 29
+#define CAMSS_CCI_BCR 30
+#define CAMSS_PHY0_BCR 31
+#define CAMSS_PHY1_BCR 32
+#define CAMSS_PHY2_BCR 33
+#define CAMSS_CSIPHY0_3P_BCR 34
+#define CAMSS_CSIPHY1_3P_BCR 35
+#define CAMSS_CSIPHY2_3P_BCR 36
+#define CAMSS_JPEG_BCR 37
+#define CAMSS_VFE_BCR 38
+#define CAMSS_VFE0_BCR 39
+#define CAMSS_VFE1_BCR 40
+#define CAMSS_CSI_VFE0_BCR 41
+#define CAMSS_CSI_VFE1_BCR 42
+#define CAMSS_CPP_TOP_BCR 43
+#define CAMSS_CPP_BCR 44
+#define CAMSS_CSI0_BCR 45
+#define CAMSS_CSI0RDI_BCR 46
+#define CAMSS_CSI0PIX_BCR 47
+#define CAMSS_CSI1_BCR 48
+#define CAMSS_CSI1RDI_BCR 49
+#define CAMSS_CSI1PIX_BCR 50
+#define CAMSS_CSI2_BCR 51
+#define CAMSS_CSI2RDI_BCR 52
+#define CAMSS_CSI2PIX_BCR 53
+#define CAMSS_CSI3_BCR 54
+#define CAMSS_CSI3RDI_BCR 55
+#define CAMSS_CSI3PIX_BCR 56
+#define CAMSS_ISPIF_BCR 57
+#define FD_BCR 58
+#define MMSS_SPDM_RM_BCR 59
+
+#endif
diff --git a/dts/include/dt-bindings/clock/r8a7791-clock.h b/dts/include/dt-bindings/clock/r8a7791-clock.h
index dd09b73..ffa1137 100644
--- a/dts/include/dt-bindings/clock/r8a7791-clock.h
+++ b/dts/include/dt-bindings/clock/r8a7791-clock.h
@@ -102,6 +102,7 @@
#define R8A7791_CLK_VIN2 9
#define R8A7791_CLK_VIN1 10
#define R8A7791_CLK_VIN0 11
+#define R8A7791_CLK_ETHERAVB 12
#define R8A7791_CLK_ETHER 13
#define R8A7791_CLK_SATA1 14
#define R8A7791_CLK_SATA0 15
diff --git a/dts/include/dt-bindings/clock/r8a7794-clock.h b/dts/include/dt-bindings/clock/r8a7794-clock.h
index 09da38a..a7a7e03 100644
--- a/dts/include/dt-bindings/clock/r8a7794-clock.h
+++ b/dts/include/dt-bindings/clock/r8a7794-clock.h
@@ -79,6 +79,7 @@
#define R8A7794_CLK_SCIF2 19
#define R8A7794_CLK_SCIF1 20
#define R8A7794_CLK_SCIF0 21
+#define R8A7794_CLK_DU0 24
/* MSTP8 */
#define R8A7794_CLK_VIN1 10
diff --git a/dts/include/dt-bindings/clock/rk3036-cru.h b/dts/include/dt-bindings/clock/rk3036-cru.h
new file mode 100644
index 0000000..ebc7a7b
--- /dev/null
+++ b/dts/include/dt-bindings/clock/rk3036-cru.h
@@ -0,0 +1,193 @@
+/*
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Xing Zheng <zhengxing@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3036_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3036_H
+
+/* core clocks */
+#define PLL_APLL 1
+#define PLL_DPLL 2
+#define PLL_GPLL 3
+#define ARMCLK 4
+
+/* sclk gates (special clocks) */
+#define SCLK_GPU 64
+#define SCLK_SPI 65
+#define SCLK_SDMMC 68
+#define SCLK_SDIO 69
+#define SCLK_EMMC 71
+#define SCLK_NANDC 76
+#define SCLK_UART0 77
+#define SCLK_UART1 78
+#define SCLK_UART2 79
+#define SCLK_I2S 82
+#define SCLK_SPDIF 83
+#define SCLK_TIMER0 85
+#define SCLK_TIMER1 86
+#define SCLK_TIMER2 87
+#define SCLK_TIMER3 88
+#define SCLK_OTGPHY0 93
+#define SCLK_LCDC 100
+#define SCLK_HDMI 109
+#define SCLK_HEVC 111
+#define SCLK_I2S_OUT 113
+#define SCLK_SDMMC_DRV 114
+#define SCLK_SDIO_DRV 115
+#define SCLK_EMMC_DRV 117
+#define SCLK_SDMMC_SAMPLE 118
+#define SCLK_SDIO_SAMPLE 119
+#define SCLK_EMMC_SAMPLE 121
+#define SCLK_PVTM_CORE 123
+#define SCLK_PVTM_GPU 124
+#define SCLK_PVTM_VIDEO 125
+#define SCLK_MAC 151
+#define SCLK_MACREF 152
+#define SCLK_SFC 160
+
+/* aclk gates */
+#define ACLK_DMAC2 194
+#define ACLK_LCDC 197
+#define ACLK_VIO 203
+#define ACLK_VCODEC 208
+#define ACLK_CPU 209
+#define ACLK_PERI 210
+
+/* pclk gates */
+#define PCLK_GPIO0 320
+#define PCLK_GPIO1 321
+#define PCLK_GPIO2 322
+#define PCLK_GRF 329
+#define PCLK_I2C0 332
+#define PCLK_I2C1 333
+#define PCLK_I2C2 334
+#define PCLK_SPI 338
+#define PCLK_UART0 341
+#define PCLK_UART1 342
+#define PCLK_UART2 343
+#define PCLK_PWM 350
+#define PCLK_TIMER 353
+#define PCLK_HDMI 360
+#define PCLK_CPU 362
+#define PCLK_PERI 363
+#define PCLK_DDRUPCTL 364
+#define PCLK_WDT 368
+#define PCLK_ACODEC 369
+
+/* hclk gates */
+#define HCLK_OTG0 449
+#define HCLK_OTG1 450
+#define HCLK_NANDC 453
+#define HCLK_SDMMC 456
+#define HCLK_SDIO 457
+#define HCLK_EMMC 459
+#define HCLK_I2S 462
+#define HCLK_LCDC 465
+#define HCLK_ROM 467
+#define HCLK_VIO_BUS 472
+#define HCLK_VCODEC 476
+#define HCLK_CPU 477
+#define HCLK_PERI 478
+
+#define CLK_NR_CLKS (HCLK_PERI + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0 0
+#define SRST_CORE1 1
+#define SRST_CORE0_DBG 4
+#define SRST_CORE1_DBG 5
+#define SRST_CORE0_POR 8
+#define SRST_CORE1_POR 9
+#define SRST_L2C 12
+#define SRST_TOPDBG 13
+#define SRST_STRC_SYS_A 14
+#define SRST_PD_CORE_NIU 15
+
+#define SRST_TIMER2 16
+#define SRST_CPUSYS_H 17
+#define SRST_AHB2APB_H 19
+#define SRST_TIMER3 20
+#define SRST_INTMEM 21
+#define SRST_ROM 22
+#define SRST_PERI_NIU 23
+#define SRST_I2S 24
+#define SRST_DDR_PLL 25
+#define SRST_GPU_DLL 26
+#define SRST_TIMER0 27
+#define SRST_TIMER1 28
+#define SRST_CORE_DLL 29
+#define SRST_EFUSE_P 30
+#define SRST_ACODEC_P 31
+
+#define SRST_GPIO0 32
+#define SRST_GPIO1 33
+#define SRST_GPIO2 34
+#define SRST_UART0 39
+#define SRST_UART1 40
+#define SRST_UART2 41
+#define SRST_I2C0 43
+#define SRST_I2C1 44
+#define SRST_I2C2 45
+#define SRST_SFC 47
+
+#define SRST_PWM0 48
+#define SRST_DAP 51
+#define SRST_DAP_SYS 52
+#define SRST_GRF 55
+#define SRST_PERIPHSYS_A 57
+#define SRST_PERIPHSYS_H 58
+#define SRST_PERIPHSYS_P 59
+#define SRST_CPU_PERI 61
+#define SRST_EMEM_PERI 62
+#define SRST_USB_PERI 63
+
+#define SRST_DMA2 64
+#define SRST_MAC 66
+#define SRST_NANDC 68
+#define SRST_USBOTG0 69
+#define SRST_OTGC0 71
+#define SRST_USBOTG1 72
+#define SRST_OTGC1 74
+#define SRST_DDRMSCH 79
+
+#define SRST_MMC0 81
+#define SRST_SDIO 82
+#define SRST_EMMC 83
+#define SRST_SPI0 84
+#define SRST_WDT 86
+#define SRST_DDRPHY 88
+#define SRST_DDRPHY_P 89
+#define SRST_DDRCTRL 90
+#define SRST_DDRCTRL_P 91
+
+#define SRST_HDMI_P 96
+#define SRST_VIO_BUS_H 99
+#define SRST_UTMI0 103
+#define SRST_UTMI1 104
+#define SRST_USBPOR 105
+
+#define SRST_VCODEC_A 112
+#define SRST_VCODEC_H 113
+#define SRST_VIO1_A 114
+#define SRST_HEVC 115
+#define SRST_VCODEC_NIU_A 116
+#define SRST_LCDC1_A 117
+#define SRST_LCDC1_H 118
+#define SRST_LCDC1_D 119
+#define SRST_GPU 120
+#define SRST_GPU_NIU_A 122
+
+#define SRST_DBG_P 131
+
+#endif
diff --git a/dts/include/dt-bindings/clock/rk3228-cru.h b/dts/include/dt-bindings/clock/rk3228-cru.h
new file mode 100644
index 0000000..a78dd89
--- /dev/null
+++ b/dts/include/dt-bindings/clock/rk3228-cru.h
@@ -0,0 +1,220 @@
+/*
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Jeffy Chen <jeffy.chen@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3228_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3228_H
+
+/* core clocks */
+#define PLL_APLL 1
+#define PLL_DPLL 2
+#define PLL_CPLL 3
+#define PLL_GPLL 4
+#define ARMCLK 5
+
+/* sclk gates (special clocks) */
+#define SCLK_SPI0 65
+#define SCLK_NANDC 67
+#define SCLK_SDMMC 68
+#define SCLK_SDIO 69
+#define SCLK_EMMC 71
+#define SCLK_UART0 77
+#define SCLK_UART1 78
+#define SCLK_UART2 79
+#define SCLK_I2S0 80
+#define SCLK_I2S1 81
+#define SCLK_I2S2 82
+#define SCLK_SPDIF 83
+#define SCLK_TIMER0 85
+#define SCLK_TIMER1 86
+#define SCLK_TIMER2 87
+#define SCLK_TIMER3 88
+#define SCLK_TIMER4 89
+#define SCLK_TIMER5 90
+#define SCLK_I2S_OUT 113
+#define SCLK_SDMMC_DRV 114
+#define SCLK_SDIO_DRV 115
+#define SCLK_EMMC_DRV 117
+#define SCLK_SDMMC_SAMPLE 118
+#define SCLK_SDIO_SAMPLE 119
+#define SCLK_EMMC_SAMPLE 121
+
+/* aclk gates */
+#define ACLK_DMAC 194
+#define ACLK_PERI 210
+
+/* pclk gates */
+#define PCLK_GPIO0 320
+#define PCLK_GPIO1 321
+#define PCLK_GPIO2 322
+#define PCLK_GPIO3 323
+#define PCLK_GRF 329
+#define PCLK_I2C0 332
+#define PCLK_I2C1 333
+#define PCLK_I2C2 334
+#define PCLK_I2C3 335
+#define PCLK_SPI0 338
+#define PCLK_UART0 341
+#define PCLK_UART1 342
+#define PCLK_UART2 343
+#define PCLK_PWM 350
+#define PCLK_TIMER 353
+#define PCLK_PERI 363
+
+/* hclk gates */
+#define HCLK_NANDC 453
+#define HCLK_SDMMC 456
+#define HCLK_SDIO 457
+#define HCLK_EMMC 459
+#define HCLK_PERI 478
+
+#define CLK_NR_CLKS (HCLK_PERI + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0_PO 0
+#define SRST_CORE1_PO 1
+#define SRST_CORE2_PO 2
+#define SRST_CORE3_PO 3
+#define SRST_CORE0 4
+#define SRST_CORE1 5
+#define SRST_CORE2 6
+#define SRST_CORE3 7
+#define SRST_CORE0_DBG 8
+#define SRST_CORE1_DBG 9
+#define SRST_CORE2_DBG 10
+#define SRST_CORE3_DBG 11
+#define SRST_TOPDBG 12
+#define SRST_ACLK_CORE 13
+#define SRST_NOC 14
+#define SRST_L2C 15
+
+#define SRST_CPUSYS_H 18
+#define SRST_BUSSYS_H 19
+#define SRST_SPDIF 20
+#define SRST_INTMEM 21
+#define SRST_ROM 22
+#define SRST_OTG_ADP 23
+#define SRST_I2S0 24
+#define SRST_I2S1 25
+#define SRST_I2S2 26
+#define SRST_ACODEC_P 27
+#define SRST_DFIMON 28
+#define SRST_MSCH 29
+#define SRST_EFUSE1024 30
+#define SRST_EFUSE256 31
+
+#define SRST_GPIO0 32
+#define SRST_GPIO1 33
+#define SRST_GPIO2 34
+#define SRST_GPIO3 35
+#define SRST_PERIPH_NOC_A 36
+#define SRST_PERIPH_NOC_BUS_H 37
+#define SRST_PERIPH_NOC_P 38
+#define SRST_UART0 39
+#define SRST_UART1 40
+#define SRST_UART2 41
+#define SRST_PHYNOC 42
+#define SRST_I2C0 43
+#define SRST_I2C1 44
+#define SRST_I2C2 45
+#define SRST_I2C3 46
+
+#define SRST_PWM 48
+#define SRST_A53_GIC 49
+#define SRST_DAP 51
+#define SRST_DAP_NOC 52
+#define SRST_CRYPTO 53
+#define SRST_SGRF 54
+#define SRST_GRF 55
+#define SRST_GMAC 56
+#define SRST_PERIPH_NOC_H 58
+#define SRST_MACPHY 63
+
+#define SRST_DMA 64
+#define SRST_NANDC 68
+#define SRST_USBOTG 69
+#define SRST_OTGC 70
+#define SRST_USBHOST0 71
+#define SRST_HOST_CTRL0 72
+#define SRST_USBHOST1 73
+#define SRST_HOST_CTRL1 74
+#define SRST_USBHOST2 75
+#define SRST_HOST_CTRL2 76
+#define SRST_USBPOR0 77
+#define SRST_USBPOR1 78
+#define SRST_DDRMSCH 79
+
+#define SRST_SMART_CARD 80
+#define SRST_SDMMC 81
+#define SRST_SDIO 82
+#define SRST_EMMC 83
+#define SRST_SPI 84
+#define SRST_TSP_H 85
+#define SRST_TSP 86
+#define SRST_TSADC 87
+#define SRST_DDRPHY 88
+#define SRST_DDRPHY_P 89
+#define SRST_DDRCTRL 90
+#define SRST_DDRCTRL_P 91
+#define SRST_HOST0_ECHI 92
+#define SRST_HOST1_ECHI 93
+#define SRST_HOST2_ECHI 94
+#define SRST_VOP_NOC_A 95
+
+#define SRST_HDMI_P 96
+#define SRST_VIO_ARBI_H 97
+#define SRST_IEP_NOC_A 98
+#define SRST_VIO_NOC_H 99
+#define SRST_VOP_A 100
+#define SRST_VOP_H 101
+#define SRST_VOP_D 102
+#define SRST_UTMI0 103
+#define SRST_UTMI1 104
+#define SRST_UTMI2 105
+#define SRST_UTMI3 106
+#define SRST_RGA 107
+#define SRST_RGA_NOC_A 108
+#define SRST_RGA_A 109
+#define SRST_RGA_H 110
+#define SRST_HDCP_A 111
+
+#define SRST_VPU_A 112
+#define SRST_VPU_H 113
+#define SRST_VPU_NOC_A 116
+#define SRST_VPU_NOC_H 117
+#define SRST_RKVDEC_A 118
+#define SRST_RKVDEC_NOC_A 119
+#define SRST_RKVDEC_H 120
+#define SRST_RKVDEC_NOC_H 121
+#define SRST_RKVDEC_CORE 122
+#define SRST_RKVDEC_CABAC 123
+#define SRST_IEP_A 124
+#define SRST_IEP_H 125
+#define SRST_GPU_A 126
+#define SRST_GPU_NOC_A 127
+
+#define SRST_CORE_DBG 128
+#define SRST_DBG_P 129
+#define SRST_TIMER0 130
+#define SRST_TIMER1 131
+#define SRST_TIMER2 132
+#define SRST_TIMER3 133
+#define SRST_TIMER4 134
+#define SRST_TIMER5 135
+#define SRST_VIO_H2P 136
+#define SRST_HDMIPHY 139
+#define SRST_VDAC 140
+#define SRST_TIMER_6CH_P 141
+
+#endif
diff --git a/dts/include/dt-bindings/clock/rk3288-cru.h b/dts/include/dt-bindings/clock/rk3288-cru.h
index c719aac..9a586e2 100644
--- a/dts/include/dt-bindings/clock/rk3288-cru.h
+++ b/dts/include/dt-bindings/clock/rk3288-cru.h
@@ -86,6 +86,8 @@
#define SCLK_USBPHY480M_SRC 122
#define SCLK_PVTM_CORE 123
#define SCLK_PVTM_GPU 124
+#define SCLK_CRYPTO 125
+#define SCLK_MIPIDSI_24M 126
#define SCLK_MAC 151
#define SCLK_MACREF_OUT 152
@@ -164,6 +166,8 @@
#define PCLK_DDRUPCTL1 366
#define PCLK_PUBL1 367
#define PCLK_WDT 368
+#define PCLK_EFUSE256 369
+#define PCLK_EFUSE1024 370
/* hclk gates */
#define HCLK_GPS 448
diff --git a/dts/include/dt-bindings/clock/sh73a0-clock.h b/dts/include/dt-bindings/clock/sh73a0-clock.h
index 5336956..2eca353 100644
--- a/dts/include/dt-bindings/clock/sh73a0-clock.h
+++ b/dts/include/dt-bindings/clock/sh73a0-clock.h
@@ -28,7 +28,8 @@
#define SH73A0_CLK_HP 14
/* MSTP0 */
-#define SH73A0_CLK_IIC2 1
+#define SH73A0_CLK_IIC2 1
+#define SH73A0_CLK_MSIOF0 0
/* MSTP1 */
#define SH73A0_CLK_CEU1 29
@@ -45,8 +46,11 @@
#define SH73A0_CLK_SCIFA7 19
#define SH73A0_CLK_SY_DMAC 18
#define SH73A0_CLK_MP_DMAC 17
+#define SH73A0_CLK_MSIOF3 15
+#define SH73A0_CLK_MSIOF1 8
#define SH73A0_CLK_SCIFA5 7
#define SH73A0_CLK_SCIFB 6
+#define SH73A0_CLK_MSIOF2 5
#define SH73A0_CLK_SCIFA0 4
#define SH73A0_CLK_SCIFA1 3
#define SH73A0_CLK_SCIFA2 2
diff --git a/dts/include/dt-bindings/clock/tegra210-car.h b/dts/include/dt-bindings/clock/tegra210-car.h
new file mode 100644
index 0000000..6f45aea
--- /dev/null
+++ b/dts/include/dt-bindings/clock/tegra210-car.h
@@ -0,0 +1,401 @@
+/*
+ * This header provides constants for binding nvidia,tegra210-car.
+ *
+ * The first 224 clocks are numbered to match the bits in the CAR's CLK_OUT_ENB
+ * registers. These IDs often match those in the CAR's RST_DEVICES registers,
+ * but not in all cases. Some bits in CLK_OUT_ENB affect multiple clocks. In
+ * this case, those clocks are assigned IDs above 224 in order to highlight
+ * this issue. Implementations that interpret these clock IDs as bit values
+ * within the CLK_OUT_ENB or RST_DEVICES registers should be careful to
+ * explicitly handle these special cases.
+ *
+ * The balance of the clocks controlled by the CAR are assigned IDs of 224 and
+ * above.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_TEGRA210_CAR_H
+#define _DT_BINDINGS_CLOCK_TEGRA210_CAR_H
+
+/* 0 */
+/* 1 */
+/* 2 */
+#define TEGRA210_CLK_ISPB 3
+#define TEGRA210_CLK_RTC 4
+#define TEGRA210_CLK_TIMER 5
+#define TEGRA210_CLK_UARTA 6
+/* 7 (register bit affects uartb and vfir) */
+#define TEGRA210_CLK_GPIO 8
+#define TEGRA210_CLK_SDMMC2 9
+/* 10 (register bit affects spdif_in and spdif_out) */
+#define TEGRA210_CLK_I2S1 11
+#define TEGRA210_CLK_I2C1 12
+/* 13 */
+#define TEGRA210_CLK_SDMMC1 14
+#define TEGRA210_CLK_SDMMC4 15
+/* 16 */
+#define TEGRA210_CLK_PWM 17
+#define TEGRA210_CLK_I2S2 18
+/* 19 */
+/* 20 (register bit affects vi and vi_sensor) */
+/* 21 */
+#define TEGRA210_CLK_USBD 22
+#define TEGRA210_CLK_ISP 23
+/* 24 */
+/* 25 */
+#define TEGRA210_CLK_DISP2 26
+#define TEGRA210_CLK_DISP1 27
+#define TEGRA210_CLK_HOST1X 28
+/* 29 */
+#define TEGRA210_CLK_I2S0 30
+/* 31 */
+
+#define TEGRA210_CLK_MC 32
+#define TEGRA210_CLK_AHBDMA 33
+#define TEGRA210_CLK_APBDMA 34
+/* 35 */
+/* 36 */
+/* 37 */
+#define TEGRA210_CLK_PMC 38
+/* 39 (register bit affects fuse and fuse_burn) */
+#define TEGRA210_CLK_KFUSE 40
+#define TEGRA210_CLK_SBC1 41
+/* 42 */
+/* 43 */
+#define TEGRA210_CLK_SBC2 44
+/* 45 */
+#define TEGRA210_CLK_SBC3 46
+#define TEGRA210_CLK_I2C5 47
+#define TEGRA210_CLK_DSIA 48
+/* 49 */
+/* 50 */
+/* 51 */
+#define TEGRA210_CLK_CSI 52
+/* 53 */
+#define TEGRA210_CLK_I2C2 54
+#define TEGRA210_CLK_UARTC 55
+#define TEGRA210_CLK_MIPI_CAL 56
+#define TEGRA210_CLK_EMC 57
+#define TEGRA210_CLK_USB2 58
+/* 59 */
+/* 60 */
+/* 61 */
+/* 62 */
+#define TEGRA210_CLK_BSEV 63
+
+/* 64 */
+#define TEGRA210_CLK_UARTD 65
+/* 66 */
+#define TEGRA210_CLK_I2C3 67
+#define TEGRA210_CLK_SBC4 68
+#define TEGRA210_CLK_SDMMC3 69
+#define TEGRA210_CLK_PCIE 70
+#define TEGRA210_CLK_OWR 71
+#define TEGRA210_CLK_AFI 72
+#define TEGRA210_CLK_CSITE 73
+/* 74 */
+/* 75 */
+/* 76 */
+/* 77 */
+#define TEGRA210_CLK_SOC_THERM 78
+#define TEGRA210_CLK_DTV 79
+/* 80 */
+#define TEGRA210_CLK_I2CSLOW 81
+#define TEGRA210_CLK_DSIB 82
+#define TEGRA210_CLK_TSEC 83
+/* 84 */
+/* 85 */
+/* 86 */
+/* 87 */
+/* 88 */
+#define TEGRA210_CLK_XUSB_HOST 89
+/* 90 */
+/* 91 */
+#define TEGRA210_CLK_CSUS 92
+/* 93 */
+/* 94 */
+/* 95 (bit affects xusb_dev and xusb_dev_src) */
+
+/* 96 */
+/* 97 */
+/* 98 */
+#define TEGRA210_CLK_MSELECT 99
+#define TEGRA210_CLK_TSENSOR 100
+#define TEGRA210_CLK_I2S3 101
+#define TEGRA210_CLK_I2S4 102
+#define TEGRA210_CLK_I2C4 103
+/* 104 */
+/* 105 */
+#define TEGRA210_CLK_D_AUDIO 106
+/* 107 ( affects abp -> ape) */
+/* 108 */
+/* 109 */
+/* 110 */
+#define TEGRA210_CLK_HDA2CODEC_2X 111
+/* 112 */
+/* 113 */
+/* 114 */
+/* 115 */
+/* 116 */
+/* 117 */
+#define TEGRA210_CLK_SPDIF_2X 118
+#define TEGRA210_CLK_ACTMON 119
+#define TEGRA210_CLK_EXTERN1 120
+#define TEGRA210_CLK_EXTERN2 121
+#define TEGRA210_CLK_EXTERN3 122
+#define TEGRA210_CLK_SATA_OOB 123
+#define TEGRA210_CLK_SATA 124
+#define TEGRA210_CLK_HDA 125
+/* 126 */
+/* 127 */
+
+#define TEGRA210_CLK_HDA2HDMI 128
+/* 129 */
+/* 130 */
+/* 131 */
+/* 132 */
+/* 133 */
+/* 134 */
+/* 135 */
+/* 136 */
+/* 137 */
+/* 138 */
+/* 139 */
+/* 140 */
+/* 141 */
+/* 142 */
+/* (bit affects xusb_falcon_src, xusb_fs_src, xusb_host_src and xusb_ss_src) */
+#define TEGRA210_CLK_XUSB_GATE 143
+#define TEGRA210_CLK_CILAB 144
+#define TEGRA210_CLK_CILCD 145
+#define TEGRA210_CLK_CILE 146
+#define TEGRA210_CLK_DSIALP 147
+#define TEGRA210_CLK_DSIBLP 148
+#define TEGRA210_CLK_ENTROPY 149
+/* 150 */
+/* 151 */
+/* 152 */
+/* 153 */
+/* 154 */
+/* 155 (bit affects dfll_ref and dfll_soc) */
+#define TEGRA210_CLK_XUSB_SS 156
+/* 157 */
+/* 158 */
+/* 159 */
+
+/* 160 */
+#define TEGRA210_CLK_DMIC1 161
+#define TEGRA210_CLK_DMIC2 162
+/* 163 */
+/* 164 */
+/* 165 */
+#define TEGRA210_CLK_I2C6 166
+/* 167 */
+/* 168 */
+/* 169 */
+/* 170 */
+#define TEGRA210_CLK_VIM2_CLK 171
+/* 172 */
+#define TEGRA210_CLK_MIPIBIF 173
+/* 174 */
+/* 175 */
+/* 176 */
+#define TEGRA210_CLK_CLK72MHZ 177
+#define TEGRA210_CLK_VIC03 178
+/* 179 */
+/* 180 */
+#define TEGRA210_CLK_DPAUX 181
+#define TEGRA210_CLK_SOR0 182
+#define TEGRA210_CLK_SOR1 183
+#define TEGRA210_CLK_GPU 184
+#define TEGRA210_CLK_DBGAPB 185
+/* 186 */
+#define TEGRA210_CLK_PLL_P_OUT_ADSP 187
+/* 188 */
+#define TEGRA210_CLK_PLL_G_REF 189
+/* 190 */
+/* 191 */
+
+/* 192 */
+#define TEGRA210_CLK_SDMMC_LEGACY 193
+#define TEGRA210_CLK_NVDEC 194
+#define TEGRA210_CLK_NVJPG 195
+/* 196 */
+#define TEGRA210_CLK_DMIC3 197
+#define TEGRA210_CLK_APE 198
+/* 199 */
+/* 200 */
+/* 201 */
+#define TEGRA210_CLK_MAUD 202
+/* 203 */
+/* 204 */
+/* 205 */
+#define TEGRA210_CLK_TSECB 206
+#define TEGRA210_CLK_DPAUX1 207
+#define TEGRA210_CLK_VI_I2C 208
+#define TEGRA210_CLK_HSIC_TRK 209
+#define TEGRA210_CLK_USB2_TRK 210
+#define TEGRA210_CLK_QSPI 211
+#define TEGRA210_CLK_UARTAPE 212
+/* 213 */
+/* 214 */
+/* 215 */
+/* 216 */
+/* 217 */
+/* 218 */
+#define TEGRA210_CLK_NVENC 219
+/* 220 */
+/* 221 */
+#define TEGRA210_CLK_SOR_SAFE 222
+#define TEGRA210_CLK_PLL_P_OUT_CPU 223
+
+
+#define TEGRA210_CLK_UARTB 224
+#define TEGRA210_CLK_VFIR 225
+#define TEGRA210_CLK_SPDIF_IN 226
+#define TEGRA210_CLK_SPDIF_OUT 227
+#define TEGRA210_CLK_VI 228
+#define TEGRA210_CLK_VI_SENSOR 229
+#define TEGRA210_CLK_FUSE 230
+#define TEGRA210_CLK_FUSE_BURN 231
+#define TEGRA210_CLK_CLK_32K 232
+#define TEGRA210_CLK_CLK_M 233
+#define TEGRA210_CLK_CLK_M_DIV2 234
+#define TEGRA210_CLK_CLK_M_DIV4 235
+#define TEGRA210_CLK_PLL_REF 236
+#define TEGRA210_CLK_PLL_C 237
+#define TEGRA210_CLK_PLL_C_OUT1 238
+#define TEGRA210_CLK_PLL_C2 239
+#define TEGRA210_CLK_PLL_C3 240
+#define TEGRA210_CLK_PLL_M 241
+#define TEGRA210_CLK_PLL_M_OUT1 242
+#define TEGRA210_CLK_PLL_P 243
+#define TEGRA210_CLK_PLL_P_OUT1 244
+#define TEGRA210_CLK_PLL_P_OUT2 245
+#define TEGRA210_CLK_PLL_P_OUT3 246
+#define TEGRA210_CLK_PLL_P_OUT4 247
+#define TEGRA210_CLK_PLL_A 248
+#define TEGRA210_CLK_PLL_A_OUT0 249
+#define TEGRA210_CLK_PLL_D 250
+#define TEGRA210_CLK_PLL_D_OUT0 251
+#define TEGRA210_CLK_PLL_D2 252
+#define TEGRA210_CLK_PLL_D2_OUT0 253
+#define TEGRA210_CLK_PLL_U 254
+#define TEGRA210_CLK_PLL_U_480M 255
+
+#define TEGRA210_CLK_PLL_U_60M 256
+#define TEGRA210_CLK_PLL_U_48M 257
+/* 258 */
+#define TEGRA210_CLK_PLL_X 259
+#define TEGRA210_CLK_PLL_X_OUT0 260
+#define TEGRA210_CLK_PLL_RE_VCO 261
+#define TEGRA210_CLK_PLL_RE_OUT 262
+#define TEGRA210_CLK_PLL_E 263
+#define TEGRA210_CLK_SPDIF_IN_SYNC 264
+#define TEGRA210_CLK_I2S0_SYNC 265
+#define TEGRA210_CLK_I2S1_SYNC 266
+#define TEGRA210_CLK_I2S2_SYNC 267
+#define TEGRA210_CLK_I2S3_SYNC 268
+#define TEGRA210_CLK_I2S4_SYNC 269
+#define TEGRA210_CLK_VIMCLK_SYNC 270
+#define TEGRA210_CLK_AUDIO0 271
+#define TEGRA210_CLK_AUDIO1 272
+#define TEGRA210_CLK_AUDIO2 273
+#define TEGRA210_CLK_AUDIO3 274
+#define TEGRA210_CLK_AUDIO4 275
+#define TEGRA210_CLK_SPDIF 276
+#define TEGRA210_CLK_CLK_OUT_1 277
+#define TEGRA210_CLK_CLK_OUT_2 278
+#define TEGRA210_CLK_CLK_OUT_3 279
+#define TEGRA210_CLK_BLINK 280
+/* 281 */
+/* 282 */
+/* 283 */
+#define TEGRA210_CLK_XUSB_HOST_SRC 284
+#define TEGRA210_CLK_XUSB_FALCON_SRC 285
+#define TEGRA210_CLK_XUSB_FS_SRC 286
+#define TEGRA210_CLK_XUSB_SS_SRC 287
+
+#define TEGRA210_CLK_XUSB_DEV_SRC 288
+#define TEGRA210_CLK_XUSB_DEV 289
+#define TEGRA210_CLK_XUSB_HS_SRC 290
+#define TEGRA210_CLK_SCLK 291
+#define TEGRA210_CLK_HCLK 292
+#define TEGRA210_CLK_PCLK 293
+#define TEGRA210_CLK_CCLK_G 294
+#define TEGRA210_CLK_CCLK_LP 295
+#define TEGRA210_CLK_DFLL_REF 296
+#define TEGRA210_CLK_DFLL_SOC 297
+#define TEGRA210_CLK_VI_SENSOR2 298
+#define TEGRA210_CLK_PLL_P_OUT5 299
+#define TEGRA210_CLK_CML0 300
+#define TEGRA210_CLK_CML1 301
+#define TEGRA210_CLK_PLL_C4 302
+#define TEGRA210_CLK_PLL_DP 303
+#define TEGRA210_CLK_PLL_E_MUX 304
+#define TEGRA210_CLK_PLL_MB 305
+#define TEGRA210_CLK_PLL_A1 306
+#define TEGRA210_CLK_PLL_D_DSI_OUT 307
+#define TEGRA210_CLK_PLL_C4_OUT0 308
+#define TEGRA210_CLK_PLL_C4_OUT1 309
+#define TEGRA210_CLK_PLL_C4_OUT2 310
+#define TEGRA210_CLK_PLL_C4_OUT3 311
+#define TEGRA210_CLK_PLL_U_OUT 312
+#define TEGRA210_CLK_PLL_U_OUT1 313
+#define TEGRA210_CLK_PLL_U_OUT2 314
+#define TEGRA210_CLK_USB2_HSIC_TRK 315
+#define TEGRA210_CLK_PLL_P_OUT_HSIO 316
+#define TEGRA210_CLK_PLL_P_OUT_XUSB 317
+#define TEGRA210_CLK_XUSB_SSP_SRC 318
+/* 319 */
+/* 320 */
+/* 321 */
+/* 322 */
+/* 323 */
+/* 324 */
+/* 325 */
+/* 326 */
+/* 327 */
+/* 328 */
+/* 329 */
+/* 330 */
+/* 331 */
+/* 332 */
+/* 333 */
+/* 334 */
+/* 335 */
+/* 336 */
+/* 337 */
+/* 338 */
+/* 339 */
+/* 340 */
+/* 341 */
+/* 342 */
+/* 343 */
+/* 344 */
+/* 345 */
+/* 346 */
+/* 347 */
+/* 348 */
+/* 349 */
+
+#define TEGRA210_CLK_AUDIO0_MUX 350
+#define TEGRA210_CLK_AUDIO1_MUX 351
+#define TEGRA210_CLK_AUDIO2_MUX 352
+#define TEGRA210_CLK_AUDIO3_MUX 353
+#define TEGRA210_CLK_AUDIO4_MUX 354
+#define TEGRA210_CLK_SPDIF_MUX 355
+#define TEGRA210_CLK_CLK_OUT_1_MUX 356
+#define TEGRA210_CLK_CLK_OUT_2_MUX 357
+#define TEGRA210_CLK_CLK_OUT_3_MUX 358
+#define TEGRA210_CLK_DSIA_MUX 359
+#define TEGRA210_CLK_DSIB_MUX 360
+#define TEGRA210_CLK_SOR0_LVDS 361
+#define TEGRA210_CLK_XUSB_SS_DIV2 362
+
+#define TEGRA210_CLK_PLL_M_UD 363
+#define TEGRA210_CLK_PLL_C_UD 364
+#define TEGRA210_CLK_SCLK_MUX 365
+
+#define TEGRA210_CLK_CLK_MAX 366
+
+#endif /* _DT_BINDINGS_CLOCK_TEGRA210_CAR_H */
diff --git a/dts/include/dt-bindings/leds/common.h b/dts/include/dt-bindings/leds/common.h
index 79fcef7..7958bec 100644
--- a/dts/include/dt-bindings/leds/common.h
+++ b/dts/include/dt-bindings/leds/common.h
@@ -6,7 +6,7 @@
* Author: Jacek Anaszewski <j.anaszewski@samsung.com>
*/
-#ifndef __DT_BINDINGS_LEDS_H__
+#ifndef __DT_BINDINGS_LEDS_H
#define __DT_BINDINGS_LEDS_H
/* External trigger type */
diff --git a/dts/include/dt-bindings/mfd/palmas.h b/dts/include/dt-bindings/mfd/palmas.h
index 2c8ac48..cdb075a 100644
--- a/dts/include/dt-bindings/mfd/palmas.h
+++ b/dts/include/dt-bindings/mfd/palmas.h
@@ -7,7 +7,7 @@
*
*/
-#ifndef __DT_BINDINGS_PALMAS_H__
+#ifndef __DT_BINDINGS_PALMAS_H
#define __DT_BINDINGS_PALMAS_H
/* External control pins */
diff --git a/dts/include/dt-bindings/pinctrl/am43xx.h b/dts/include/dt-bindings/pinctrl/am43xx.h
index 774dc1e..344bd1e 100644
--- a/dts/include/dt-bindings/pinctrl/am43xx.h
+++ b/dts/include/dt-bindings/pinctrl/am43xx.h
@@ -31,5 +31,11 @@
#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
#define PIN_INPUT_PULLDOWN (INPUT_EN)
+/*
+ * Macro to allow using the absolute physical address instead of the
+ * padconf registers instead of the offset from padconf base.
+ */
+#define AM4372_IOPAD(pa, val) (((pa) & 0xffff) - 0x0800) (val)
+
#endif
diff --git a/dts/include/dt-bindings/pinctrl/dm814x.h b/dts/include/dt-bindings/pinctrl/dm814x.h
new file mode 100644
index 0000000..0f48427
--- /dev/null
+++ b/dts/include/dt-bindings/pinctrl/dm814x.h
@@ -0,0 +1,48 @@
+/*
+ * This header provides constants specific to DM814X pinctrl bindings.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_DM814X_H
+#define _DT_BINDINGS_PINCTRL_DM814X_H
+
+#include <dt-bindings/pinctrl/omap.h>
+
+#undef INPUT_EN
+#undef PULL_UP
+#undef PULL_ENA
+
+/*
+ * Note that dm814x silicon revision 2.1 and older require input enabled
+ * (bit 18 set) for all 3.3V I/Os to avoid cumulative hardware damage. For
+ * more info, see errata advisory 2.1.87. We leave bit 18 out of
+ * function-mask in dm814x.h and rely on the bootloader for it.
+ */
+#define INPUT_EN (1 << 18)
+#define PULL_UP (1 << 17)
+#define PULL_DISABLE (1 << 16)
+
+/* update macro depending on INPUT_EN and PULL_ENA */
+#undef PIN_OUTPUT
+#undef PIN_OUTPUT_PULLUP
+#undef PIN_OUTPUT_PULLDOWN
+#undef PIN_INPUT
+#undef PIN_INPUT_PULLUP
+#undef PIN_INPUT_PULLDOWN
+
+#define PIN_OUTPUT (PULL_DISABLE)
+#define PIN_OUTPUT_PULLUP (PULL_UP)
+#define PIN_OUTPUT_PULLDOWN 0
+#define PIN_INPUT (INPUT_EN | PULL_DISABLE)
+#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN (INPUT_EN)
+
+/* undef non-existing modes */
+#undef PIN_OFF_NONE
+#undef PIN_OFF_OUTPUT_HIGH
+#undef PIN_OFF_OUTPUT_LOW
+#undef PIN_OFF_INPUT_PULLUP
+#undef PIN_OFF_INPUT_PULLDOWN
+#undef PIN_OFF_WAKEUPENABLE
+
+#endif
+
diff --git a/dts/include/dt-bindings/pinctrl/dra.h b/dts/include/dt-bindings/pinctrl/dra.h
index 4379e29..5c75e80 100644
--- a/dts/include/dt-bindings/pinctrl/dra.h
+++ b/dts/include/dt-bindings/pinctrl/dra.h
@@ -67,5 +67,11 @@
#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP)
#define PIN_INPUT_PULLDOWN (PULL_ENA | INPUT_EN)
+/*
+ * Macro to allow using the absolute physical address instead of the
+ * padconf registers instead of the offset from padconf base.
+ */
+#define DRA7XX_CORE_IOPAD(pa, val) (((pa) & 0xffff) - 0x3400) (val)
+
#endif
diff --git a/dts/include/dt-bindings/pinctrl/omap.h b/dts/include/dt-bindings/pinctrl/omap.h
index 1394925..effadd0 100644
--- a/dts/include/dt-bindings/pinctrl/omap.h
+++ b/dts/include/dt-bindings/pinctrl/omap.h
@@ -61,10 +61,9 @@
#define OMAP3430_CORE2_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x25d8) (val)
#define OMAP3630_CORE2_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x25a0) (val)
#define OMAP3_WKUP_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x2a00) (val)
+#define DM814X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
#define DM816X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
#define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-#define AM4372_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val)
-#define DRA7XX_CORE_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x3400) (val)
/*
* Macros to allow using the offset from the padconf physical address
diff --git a/dts/include/dt-bindings/power/raspberrypi-power.h b/dts/include/dt-bindings/power/raspberrypi-power.h
new file mode 100644
index 0000000..b3ff8e0
--- /dev/null
+++ b/dts/include/dt-bindings/power/raspberrypi-power.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright © 2015 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _DT_BINDINGS_ARM_BCM2835_RPI_POWER_H
+#define _DT_BINDINGS_ARM_BCM2835_RPI_POWER_H
+
+/* These power domain indices are the firmware interface's indices
+ * minus one.
+ */
+#define RPI_POWER_DOMAIN_I2C0 0
+#define RPI_POWER_DOMAIN_I2C1 1
+#define RPI_POWER_DOMAIN_I2C2 2
+#define RPI_POWER_DOMAIN_VIDEO_SCALER 3
+#define RPI_POWER_DOMAIN_VPU1 4
+#define RPI_POWER_DOMAIN_HDMI 5
+#define RPI_POWER_DOMAIN_USB 6
+#define RPI_POWER_DOMAIN_VEC 7
+#define RPI_POWER_DOMAIN_JPEG 8
+#define RPI_POWER_DOMAIN_H264 9
+#define RPI_POWER_DOMAIN_V3D 10
+#define RPI_POWER_DOMAIN_ISP 11
+#define RPI_POWER_DOMAIN_UNICAM0 12
+#define RPI_POWER_DOMAIN_UNICAM1 13
+#define RPI_POWER_DOMAIN_CCP2RX 14
+#define RPI_POWER_DOMAIN_CSI2 15
+#define RPI_POWER_DOMAIN_CPI 16
+#define RPI_POWER_DOMAIN_DSI0 17
+#define RPI_POWER_DOMAIN_DSI1 18
+#define RPI_POWER_DOMAIN_TRANSPOSER 19
+#define RPI_POWER_DOMAIN_CCP2TX 20
+#define RPI_POWER_DOMAIN_CDP 21
+#define RPI_POWER_DOMAIN_ARM 22
+
+#define RPI_POWER_DOMAIN_COUNT 23
+
+#endif /* _DT_BINDINGS_ARM_BCM2835_RPI_POWER_H */
diff --git a/dts/include/dt-bindings/reset/hisi,hi6220-resets.h b/dts/include/dt-bindings/reset/hisi,hi6220-resets.h
new file mode 100644
index 0000000..ca08a7e
--- /dev/null
+++ b/dts/include/dt-bindings/reset/hisi,hi6220-resets.h
@@ -0,0 +1,67 @@
+/**
+ * This header provides index for the reset controller
+ * based on hi6220 SoC.
+ */
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_HI6220
+#define _DT_BINDINGS_RESET_CONTROLLER_HI6220
+
+#define PERIPH_RSTDIS0_MMC0 0x000
+#define PERIPH_RSTDIS0_MMC1 0x001
+#define PERIPH_RSTDIS0_MMC2 0x002
+#define PERIPH_RSTDIS0_NANDC 0x003
+#define PERIPH_RSTDIS0_USBOTG_BUS 0x004
+#define PERIPH_RSTDIS0_POR_PICOPHY 0x005
+#define PERIPH_RSTDIS0_USBOTG 0x006
+#define PERIPH_RSTDIS0_USBOTG_32K 0x007
+#define PERIPH_RSTDIS1_HIFI 0x100
+#define PERIPH_RSTDIS1_DIGACODEC 0x105
+#define PERIPH_RSTEN2_IPF 0x200
+#define PERIPH_RSTEN2_SOCP 0x201
+#define PERIPH_RSTEN2_DMAC 0x202
+#define PERIPH_RSTEN2_SECENG 0x203
+#define PERIPH_RSTEN2_ABB 0x204
+#define PERIPH_RSTEN2_HPM0 0x205
+#define PERIPH_RSTEN2_HPM1 0x206
+#define PERIPH_RSTEN2_HPM2 0x207
+#define PERIPH_RSTEN2_HPM3 0x208
+#define PERIPH_RSTEN3_CSSYS 0x300
+#define PERIPH_RSTEN3_I2C0 0x301
+#define PERIPH_RSTEN3_I2C1 0x302
+#define PERIPH_RSTEN3_I2C2 0x303
+#define PERIPH_RSTEN3_I2C3 0x304
+#define PERIPH_RSTEN3_UART1 0x305
+#define PERIPH_RSTEN3_UART2 0x306
+#define PERIPH_RSTEN3_UART3 0x307
+#define PERIPH_RSTEN3_UART4 0x308
+#define PERIPH_RSTEN3_SSP 0x309
+#define PERIPH_RSTEN3_PWM 0x30a
+#define PERIPH_RSTEN3_BLPWM 0x30b
+#define PERIPH_RSTEN3_TSENSOR 0x30c
+#define PERIPH_RSTEN3_DAPB 0x312
+#define PERIPH_RSTEN3_HKADC 0x313
+#define PERIPH_RSTEN3_CODEC_SSI 0x314
+#define PERIPH_RSTEN3_PMUSSI1 0x316
+#define PERIPH_RSTEN8_RS0 0x400
+#define PERIPH_RSTEN8_RS2 0x401
+#define PERIPH_RSTEN8_RS3 0x402
+#define PERIPH_RSTEN8_MS0 0x403
+#define PERIPH_RSTEN8_MS2 0x405
+#define PERIPH_RSTEN8_XG2RAM0 0x406
+#define PERIPH_RSTEN8_X2SRAM_TZMA 0x407
+#define PERIPH_RSTEN8_SRAM 0x408
+#define PERIPH_RSTEN8_HARQ 0x40a
+#define PERIPH_RSTEN8_DDRC 0x40c
+#define PERIPH_RSTEN8_DDRC_APB 0x40d
+#define PERIPH_RSTEN8_DDRPACK_APB 0x40e
+#define PERIPH_RSTEN8_DDRT 0x411
+#define PERIPH_RSDIST9_CARM_DAP 0x500
+#define PERIPH_RSDIST9_CARM_ATB 0x501
+#define PERIPH_RSDIST9_CARM_LBUS 0x502
+#define PERIPH_RSDIST9_CARM_POR 0x503
+#define PERIPH_RSDIST9_CARM_CORE 0x504
+#define PERIPH_RSDIST9_CARM_DBG 0x505
+#define PERIPH_RSDIST9_CARM_L2 0x506
+#define PERIPH_RSDIST9_CARM_SOCDBG 0x507
+#define PERIPH_RSDIST9_CARM_ETM 0x508
+
+#endif /*_DT_BINDINGS_RESET_CONTROLLER_HI6220*/
diff --git a/dts/include/dt-bindings/reset-controller/mt8135-resets.h b/dts/include/dt-bindings/reset/mt8135-resets.h
index 1fb6295..1fb6295 100644
--- a/dts/include/dt-bindings/reset-controller/mt8135-resets.h
+++ b/dts/include/dt-bindings/reset/mt8135-resets.h
diff --git a/dts/include/dt-bindings/reset-controller/mt8173-resets.h b/dts/include/dt-bindings/reset/mt8173-resets.h
index 9464b37..9464b37 100644
--- a/dts/include/dt-bindings/reset-controller/mt8173-resets.h
+++ b/dts/include/dt-bindings/reset/mt8173-resets.h
diff --git a/dts/include/dt-bindings/reset/stih407-resets.h b/dts/include/dt-bindings/reset/stih407-resets.h
index 02d4328..4ab3a1c 100644
--- a/dts/include/dt-bindings/reset/stih407-resets.h
+++ b/dts/include/dt-bindings/reset/stih407-resets.h
@@ -52,6 +52,10 @@
#define STIH407_KEYSCAN_SOFTRESET 26
#define STIH407_USB2_PORT0_SOFTRESET 27
#define STIH407_USB2_PORT1_SOFTRESET 28
+#define STIH407_ST231_AUD_SOFTRESET 29
+#define STIH407_ST231_DMU_SOFTRESET 30
+#define STIH407_ST231_GP0_SOFTRESET 31
+#define STIH407_ST231_GP1_SOFTRESET 32
/* Picophy reset defines */
#define STIH407_PICOPHY0_RESET 0
diff --git a/dts/src/arm/am335x-baltos-ir5221.dts b/dts/src/arm/am335x-baltos-ir5221.dts
index 7d36601..ded1eb6 100644
--- a/dts/src/arm/am335x-baltos-ir5221.dts
+++ b/dts/src/arm/am335x-baltos-ir5221.dts
@@ -56,175 +56,171 @@
&am33xx_pinmux {
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
- 0x020 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */
- 0x024 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */
- 0x028 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */
- 0x02c (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */
- 0x080 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */
- 0x084 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */
- 0x1e4 (PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */
+ AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */
+ AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */
+ AM33XX_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */
+ AM33XX_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */
+ AM33XX_IOPAD(0x9e4, PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */
>;
};
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
- 0x1e8 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
+ AM33XX_IOPAD(0x9e8, PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */
>;
};
tps65910_pins: pinmux_tps65910_pins {
pinctrl-single,pins = <
- 0x078 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */
+ AM33XX_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */
>;
};
tca6416_pins: pinmux_tca6416_pins {
pinctrl-single,pins = <
- 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+ AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x158 0x2a /* spi0_d1.i2c1_sda_mux3, INPUT | MODE2 */
- 0x15c 0x2a /* spi0_cs0.i2c1_scl_mux3, INPUT | MODE2 */
+ AM33XX_IOPAD(0x958, PIN_INPUT | MUX_MODE2) /* spi0_d1.i2c1_sda_mux3 */
+ AM33XX_IOPAD(0x95c, PIN_INPUT | MUX_MODE2) /* spi0_cs0.i2c1_scl_mux3 */
>;
};
dcan1_pins: pinmux_dcan1_pins {
pinctrl-single,pins = <
- 0x168 0x0a /* uart0_ctsn.dcan1_tx_mux0, OUTPUT | MODE2 */
- 0x16c 0x2a /* uart0_rtsn.dcan1_rx_mux0, INPUT | MODE2 */
+ AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.dcan1_tx_mux0 */
+ AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2) /* uart0_rtsn.dcan1_rx_mux0 */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x180 0x28 /* uart1_rxd, INPUT | MODE0 */
- 0x184 0x28 /* uart1_txd, INPUT | MODE0 */
- /*0x178 0x28*/ /* uart1_ctsn, INPUT | MODE0 */
- /*0x17c 0x08*/ /* uart1_rtsn, OUTPUT | MODE0 */
- 0x178 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn, INPUT | MODE0 */
- 0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn, OUTPUT | MODE0 */
- 0x0e0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
- 0x0e4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
- 0x0e8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
- 0x0ec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
+ AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd */
+ AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE0) /* uart1_txd */
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn, INPUT | MODE0 */
+ AM33XX_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn, OUTPUT | MODE0 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */
+ AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */
+ AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */
+ AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0x150 0x29 /* spi0_sclk.uart2_rxd_mux3, INPUT | MODE1 */
- 0x154 0x09 /* spi0_d0.uart2_txd_mux3, OUTPUT | MODE1 */
- /*0x188 0x2a*/ /* i2c0_sda.uart2_ctsn_mux0, INPUT | MODE2 */
- /*0x18c 0x2a*/ /* i2c0_scl.uart2_rtsn_mux0, INPUT | MODE2 */
- 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* i2c0_sda.uart2_ctsn_mux0 */
- 0x18c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* i2c0_scl.uart2_rtsn_mux0 */
- 0x030 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
- 0x034 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
- 0x038 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
- 0x03c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
-
- 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+ AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd_mux3 */
+ AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd_mux3 */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7) /* i2c0_sda.uart2_ctsn_mux0 */
+ AM33XX_IOPAD(0x98c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* i2c0_scl.uart2_rtsn_mux0 */
+ AM33XX_IOPAD(0x830, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */
+ AM33XX_IOPAD(0x834, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */
+ AM33XX_IOPAD(0x838, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */
+ AM33XX_IOPAD(0x83c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */
+
+ AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */
/* Slave 2 */
- 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
- 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
- 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
- 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
- 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
- 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
- 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
+ AM33XX_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */
+ AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */
+ AM33XX_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */
+ AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */
+ AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */
+ AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */
+ AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
/* Slave 2 reset value*/
- 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
nandflash_pins_s0: nandflash_pins_s0 {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
};
diff --git a/dts/src/arm/am335x-bone-common.dtsi b/dts/src/arm/am335x-bone-common.dtsi
index 5d370d5..f3db13d 100644
--- a/dts/src/arm/am335x-bone-common.dtsi
+++ b/dts/src/arm/am335x-bone-common.dtsi
@@ -67,112 +67,112 @@
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
- 0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
- 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
- 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
+ AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c2_pins: pinmux_i2c2_pins {
pinctrl-single,pins = <
- 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
- 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
+ AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
+ AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
- 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
- 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
- 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
- 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
- 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
- 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
- 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
- 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
- 0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
- 0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
>;
};
emmc_pins: pinmux_emmc_pins {
pinctrl-single,pins = <
- 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
- 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
- 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
- 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
- 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
- 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
>;
};
};
@@ -285,10 +285,8 @@
};
};
-
-/include/ "tps65217.dtsi"
-
&tps {
+ compatible = "ti,tps65217";
/*
* Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
* mode") at poweroff. Most BeagleBone versions do not support RTC-only
@@ -309,12 +307,17 @@
ti,pmic-shutdown-controller;
regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dcdc1_reg: regulator@0 {
+ reg = <0>;
regulator-name = "vdds_dpr";
regulator-always-on;
};
dcdc2_reg: regulator@1 {
+ reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@@ -324,6 +327,7 @@
};
dcdc3_reg: regulator@2 {
+ reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@@ -333,21 +337,25 @@
};
ldo1_reg: regulator@3 {
+ reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-always-on;
};
ldo2_reg: regulator@4 {
+ reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-always-on;
};
ldo3_reg: regulator@5 {
+ reg = <5>;
regulator-name = "vdd_1v8";
regulator-always-on;
};
ldo4_reg: regulator@6 {
+ reg = <6>;
regulator-name = "vdd_3v3a";
regulator-always-on;
};
diff --git a/dts/src/arm/am335x-boneblack.dts b/dts/src/arm/am335x-boneblack.dts
index eadbba3..55c0e95 100644
--- a/dts/src/arm/am335x-boneblack.dts
+++ b/dts/src/arm/am335x-boneblack.dts
@@ -36,32 +36,32 @@
&am33xx_pinmux {
nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
pinctrl-single,pins = <
- 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
- 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
- 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
- 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
- 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
- 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
+ AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */
+ AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
+ AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
+ AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
+ AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
+ AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
+ AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
+ AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
+ AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
+ AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
+ AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
+ AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
+ AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
+ AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
+ AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
+ AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
+ AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
+ AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */
+ AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */
+ AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */
+ AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
>;
};
nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
pinctrl-single,pins = <
- 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
+ AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */
>;
};
};
diff --git a/dts/src/arm/am335x-bonegreen.dts b/dts/src/arm/am335x-bonegreen.dts
index 0f65bda..dce3c86 100644
--- a/dts/src/arm/am335x-bonegreen.dts
+++ b/dts/src/arm/am335x-bonegreen.dts
@@ -36,8 +36,8 @@
&am33xx_pinmux {
uart2_pins: uart2_pins {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
- 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
+ AM33XX_IOPAD(0x950, PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */
+ AM33XX_IOPAD(0x954, PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */
>;
};
};
diff --git a/dts/src/arm/am335x-chiliboard.dts b/dts/src/arm/am335x-chiliboard.dts
index 310da20..15d47ab 100644
--- a/dts/src/arm/am335x-chiliboard.dts
+++ b/dts/src/arm/am335x-chiliboard.dts
@@ -37,26 +37,26 @@
&am33xx_pinmux {
usb1_drvvbus: usb1_drvvbus {
pinctrl-single,pins = <
- 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
+ AM33XX_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
>;
};
sd_pins: pinmux_sd_card {
pinctrl-single,pins = <
- 0xf0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
- 0xf4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
- 0xf8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
- 0xfc (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
- 0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
- 0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
- 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
led_gpio_pins: led_gpio_pins {
pinctrl-single,pins = <
- 0x1e4 (PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
- 0x1e8 (PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
+ AM33XX_IOPAD(0x9e4, PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
+ AM33XX_IOPAD(0x9e8, PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
>;
};
};
diff --git a/dts/src/arm/am335x-chilisom.dtsi b/dts/src/arm/am335x-chilisom.dtsi
index 7e9a34d..fda457b 100644
--- a/dts/src/arm/am335x-chilisom.dtsi
+++ b/dts/src/arm/am335x-chilisom.dtsi
@@ -29,81 +29,81 @@
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
- 0x110 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
- 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
- 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
- 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
- 0x13c (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
- 0x140 (PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii_ref_clk */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
- 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* mdio_data.mdio_data */
- 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
/* mdio_clk.mdio_clk */
- 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
- 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
- 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
nandflash_pins: nandflash_pins {
pinctrl-single,pins = <
- 0x00 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x04 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x08 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0x0c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
-
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
+
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
};
@@ -128,16 +128,21 @@
};
-/include/ "tps65217.dtsi"
-
&tps {
+ compatible = "ti,tps65217";
+
regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dcdc1_reg: regulator@0 {
+ reg = <0>;
regulator-name = "vdds_dpr";
regulator-always-on;
};
dcdc2_reg: regulator@1 {
+ reg = <1>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
@@ -147,6 +152,7 @@
};
dcdc3_reg: regulator@2 {
+ reg = <2>;
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
regulator-name = "vdd_core";
regulator-min-microvolt = <925000>;
@@ -156,24 +162,28 @@
};
ldo1_reg: regulator@3 {
+ reg = <3>;
regulator-name = "vio,vrtc,vdds";
regulator-boot-on;
regulator-always-on;
};
ldo2_reg: regulator@4 {
+ reg = <4>;
regulator-name = "vdd_3v3aux";
regulator-boot-on;
regulator-always-on;
};
ldo3_reg: regulator@5 {
+ reg = <5>;
regulator-name = "vdd_1v8";
regulator-boot-on;
regulator-always-on;
};
ldo4_reg: regulator@6 {
+ reg = <6>;
regulator-name = "vdd_3v3d";
regulator-boot-on;
regulator-always-on;
diff --git a/dts/src/arm/am335x-cm-t335.dts b/dts/src/arm/am335x-cm-t335.dts
new file mode 100644
index 0000000..42e9b66
--- /dev/null
+++ b/dts/src/arm/am335x-cm-t335.dts
@@ -0,0 +1,396 @@
+/*
+ * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
+ *
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+ model = "CompuLab CM-T335";
+ compatible = "compulab,cm-t335", "ti,am33xx";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x8000000>; /* 128 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_led_pins>;
+ led@0 {
+ label = "cm_t335:green";
+ gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; /* gpio2_0 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ /* regulator for mmc */
+ vmmc_fixed: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&ecap0 0 50000 0>;
+ brightness-levels = <0 51 53 56 62 75 101 152 255>;
+ default-brightness-level = <8>;
+ };
+};
+
+&am33xx_pinmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&bluetooth_pins>;
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ /* uart0_ctsn.i2c1_sda */
+ AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE2)
+ /* uart0_rtsn.i2c1_scl */
+ AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE2)
+ >;
+ };
+
+ gpio_led_pins: pinmux_gpio_led_pins {
+ pinctrl-single,pins = <
+ /* gpmc_csn3.gpio2_0 */
+ AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE7)
+ >;
+ };
+
+ nandflash_pins: pinmux_nandflash_pins {
+ pinctrl-single,pins = <
+ /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad3.gpmc_ad3 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad4.gpmc_ad4 */
+ AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad5.gpmc_ad5 */
+ AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad6.gpmc_ad6 */
+ AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_ad7.gpmc_ad7 */
+ AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_wait0.gpmc_wait0 */
+ AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* gpmc_wpn.gpio0_30 */
+ AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7)
+ /* gpmc_csn0.gpmc_csn0 */
+ AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
+ /* gpmc_advn_ale.gpmc_advn_ale */
+ AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
+ /* gpmc_oen_ren.gpmc_oen_ren */
+ AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
+ /* gpmc_wen.gpmc_wen */
+ AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
+ /* gpmc_ben0_cle.gpmc_ben0_cle */
+ AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ uart1_pins: pinmux_uart1_pins {
+ pinctrl-single,pins = <
+ /* uart1_ctsn.uart1_ctsn */
+ AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0)
+ /* uart1_rtsn.uart1_rtsn */
+ AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ /* uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* uart1_txd.uart1_txd */
+ AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+ >;
+ };
+
+ ecap0_pins: pinmux_ecap0_pins {
+ pinctrl-single,pins = <
+ /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+ AM33XX_IOPAD(0x964, 0x0)
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ /* mii1_tx_en.rgmii1_tctl */
+ AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxdv.rgmii1_rctl */
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_txd3.rgmii1_td3 */
+ AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_txd2.rgmii1_td2 */
+ AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_txd1.rgmii1_td1 */
+ AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_txd0.rgmii1_td0 */
+ AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_txclk.rgmii1_tclk */
+ AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxclk.rgmii1_rclk */
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxd3.rgmii1_rd3 */
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxd2.rgmii1_rd2 */
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxd1.rgmii1_rd1 */
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ /* mii1_rxd0.rgmii1_rd0 */
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* mdio_data.mdio_data */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
+ /* mdio_clk.mdio_clk */
+ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ /* mmc0_dat3.mmc0_dat3 */
+ AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* mmc0_dat2.mmc0_dat2 */
+ AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* mmc0_dat1.mmc0_dat1 */
+ AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* mmc0_dat0.mmc0_dat0 */
+ AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* mmc0_clk.mmc0_clk */
+ AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)
+ /* mmc0_cmd.mmc0_cmd */
+ AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)
+ >;
+ };
+
+ /* wl1271 bluetooth */
+ bluetooth_pins: pinmux_bluetooth_pins {
+ pinctrl-single,pins = <
+ /* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */
+ AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE7)
+ >;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+/* WLS1271 bluetooth */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>;
+
+status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+ /* CM-T335 board EEPROM */
+ eeprom: 24c02@50 {
+ compatible = "atmel,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+ /* Real Time Clock */
+ ext_rtc: em3027@56 {
+ compatible = "emmicro,em3027";
+ reg = <0x56>;
+ };
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+&epwmss0 {
+ status = "okay";
+
+ ecap0: ecap@48300100 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ecap0_pins>;
+ };
+};
+
+&gpmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nandflash_pins>;
+ ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ nand@0,0 {
+ reg = <0 0 0>; /* CS0, offset 0 */
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <8>;
+ gpmc,device-width = <1>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-on-ns = <0>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-on-ns = <0>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wait-on-read = "true";
+ gpmc,wait-on-write = "true";
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ /* MTD partition table */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "spl";
+ reg = <0x00000000 0x00200000>;
+ };
+ partition@1 {
+ label = "uboot";
+ reg = <0x00200000 0x00100000>;
+ };
+ partition@2 {
+ label = "uboot environment";
+ reg = <0x00300000 0x00100000>;
+ };
+ partition@3 {
+ label = "dtb";
+ reg = <0x00400000 0x00100000>;
+ };
+ partition@4 {
+ label = "splash";
+ reg = <0x00500000 0x00400000>;
+ };
+ partition@5 {
+ label = "linux";
+ reg = <0x00900000 0x00600000>;
+ };
+ partition@6 {
+ label = "rootfs";
+ reg = <0x00F00000 0>;
+ };
+ };
+};
+
+&elm {
+ status = "okay";
+};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ slaves = <1>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rgmii-txid";
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmc_fixed>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+};
diff --git a/dts/src/arm/am335x-evm.dts b/dts/src/arm/am335x-evm.dts
index d9d00ab..0d6a68c 100644
--- a/dts/src/arm/am335x-evm.dts
+++ b/dts/src/arm/am335x-evm.dts
@@ -83,14 +83,14 @@
label = "volume-up";
linux,code = <115>;
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup;
+ wakeup-source;
};
switch@10 {
label = "volume-down";
linux,code = <114>;
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup;
+ wakeup-source;
};
};
@@ -168,215 +168,215 @@
matrix_keypad_s0: matrix_keypad_s0 {
pinctrl-single,pins = <
- 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
- 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */
- 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */
- 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */
- 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */
+ AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
+ AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */
+ AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */
>;
};
volume_keys_s0: volume_keys_s0 {
pinctrl-single,pins = <
- 0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */
- 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */
+ AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_sclk.gpio0_2 */
+ AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE7) /* spi0_d0.gpio0_3 */
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,pins = <
- 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
- 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
- 0x158 (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */
- 0x15c (PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */
+ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */
+ AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */
>;
};
uart0_pins: pinmux_uart0_pins {
pinctrl-single,pins = <
- 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
- 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
- 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
- 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
- 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+ AM33XX_IOPAD(0x978, PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
+ AM33XX_IOPAD(0x97C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
+ AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
+ AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
>;
};
clkout2_pin: pinmux_clkout2_pin {
pinctrl-single,pins = <
- 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+ AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
>;
};
nandflash_pins_s0: nandflash_pins_s0 {
pinctrl-single,pins = <
- 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
- 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
- 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
- 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
- 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
- 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
- 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
- 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
- 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
- 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */
- 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
- 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
- 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
- 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
- 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
+ AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
+ AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
+ AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
+ AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc