diff options
Diffstat (limited to 'dts')
28 files changed, 98 insertions, 34 deletions
diff --git a/dts/Bindings/clock/idt,versaclock5.yaml b/dts/Bindings/clock/idt,versaclock5.yaml index c268debe5b..28675b0b80 100644 --- a/dts/Bindings/clock/idt,versaclock5.yaml +++ b/dts/Bindings/clock/idt,versaclock5.yaml @@ -60,7 +60,6 @@ properties: maxItems: 2 idt,xtal-load-femtofarads: - $ref: /schemas/types.yaml#/definitions/uint32 minimum: 9000 maximum: 22760 description: Optional load capacitor for XTAL1 and XTAL2 @@ -84,7 +83,6 @@ patternProperties: enum: [ 1800000, 2500000, 3300000 ] idt,slew-percent: description: The Slew rate control for CMOS single-ended. - $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 80, 85, 90, 100 ] required: diff --git a/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 6f2398cdc8..1e7894e524 100644 --- a/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -102,7 +102,6 @@ patternProperties: st,adc-channel-names: description: List of single-ended channel names. - $ref: /schemas/types.yaml#/definitions/string-array st,filter-order: description: | diff --git a/dts/Bindings/input/input.yaml b/dts/Bindings/input/input.yaml index 74244d21d2..d41d8743aa 100644 --- a/dts/Bindings/input/input.yaml +++ b/dts/Bindings/input/input.yaml @@ -38,6 +38,5 @@ properties: Duration in seconds which the key should be kept pressed for device to reset automatically. Device with key pressed reset feature can specify this property. - $ref: /schemas/types.yaml#/definitions/uint32 additionalProperties: true diff --git a/dts/Bindings/interconnect/qcom,rpmh.yaml b/dts/Bindings/interconnect/qcom,rpmh.yaml index cb6498108b..36c955965d 100644 --- a/dts/Bindings/interconnect/qcom,rpmh.yaml +++ b/dts/Bindings/interconnect/qcom,rpmh.yaml @@ -92,7 +92,6 @@ properties: this interconnect to send RPMh commands. qcom,bcm-voter-names: - $ref: /schemas/types.yaml#/definitions/string-array description: | Names for each of the qcom,bcm-voters specified. diff --git a/dts/Bindings/leds/leds-bcm6328.txt b/dts/Bindings/leds/leds-bcm6328.txt index ccebce597f..a555d94084 100644 --- a/dts/Bindings/leds/leds-bcm6328.txt +++ b/dts/Bindings/leds/leds-bcm6328.txt @@ -4,8 +4,8 @@ This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268. In these SoCs it's possible to control LEDs both as GPIOs or by hardware. However, on some devices there are Serial LEDs (LEDs connected to a 74x164 controller), which can either be controlled by software (exporting the 74x164 -as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or -by hardware using this driver. +as spi-gpio. See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), +or by hardware using this driver. Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and exporting the 74x164 as spi-gpio prevents those LEDs to be hardware controlled, so the only chance to keep them working is by using this driver. diff --git a/dts/Bindings/leds/leds-bcm6358.txt b/dts/Bindings/leds/leds-bcm6358.txt index da5708e7b4..6e51c6b91e 100644 --- a/dts/Bindings/leds/leds-bcm6358.txt +++ b/dts/Bindings/leds/leds-bcm6358.txt @@ -3,7 +3,7 @@ LEDs connected to Broadcom BCM6358 controller This controller is present on BCM6358 and BCM6368. In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller), which can either be controlled by software (exporting the 74x164 as spi-gpio. -See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or +See Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml), or by hardware using this driver. Required properties: diff --git a/dts/Bindings/media/renesas,drif.yaml b/dts/Bindings/media/renesas,drif.yaml index f1bdaeab40..ce505a7c00 100644 --- a/dts/Bindings/media/renesas,drif.yaml +++ b/dts/Bindings/media/renesas,drif.yaml @@ -99,32 +99,26 @@ properties: Indicates that the channel acts as primary among the bonded channels. port: - type: object + $ref: /schemas/graph.yaml#/properties/port + unevaluatedProperties: false description: - Child port node corresponding to the data input, in accordance with the - video interface bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - The port node must contain at least one endpoint. + Child port node corresponding to the data input. The port node must + contain at least one endpoint. properties: endpoint: - type: object + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false properties: - remote-endpoint: - description: - A phandle to the remote tuner endpoint subnode in remote node - port. - sync-active: + $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1] description: Indicates sync signal polarity, 0/1 for low/high respectively. This property maps to SYNCAC bit in the hardware manual. The default is 1 (active high). - additionalProperties: false - required: - compatible - reg diff --git a/dts/Bindings/net/qcom,ipa.yaml b/dts/Bindings/net/qcom,ipa.yaml index 7443490d4c..5fe6d3dceb 100644 --- a/dts/Bindings/net/qcom,ipa.yaml +++ b/dts/Bindings/net/qcom,ipa.yaml @@ -105,7 +105,6 @@ properties: - description: Whether the IPA clock is enabled (if valid) qcom,smem-state-names: - $ref: /schemas/types.yaml#/definitions/string-array description: The names of the state bits used for SMP2P output items: - const: ipa-clock-enabled-valid diff --git a/dts/Bindings/nvmem/mtk-efuse.txt b/dts/Bindings/nvmem/mtk-efuse.txt index d479ad977e..b6791702bc 100644 --- a/dts/Bindings/nvmem/mtk-efuse.txt +++ b/dts/Bindings/nvmem/mtk-efuse.txt @@ -9,7 +9,6 @@ Required properties: "mediatek,mt8173-efuse" or "mediatek,efuse": for MT8173 "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192 "mediatek,mt8516-efuse", "mediatek,efuse": for MT8516 - "mediatek,mt8192-efuse", "mediatek,efuse": for MT8192 - reg: Should contain registers location and length = Data cells = diff --git a/dts/Bindings/phy/phy-cadence-torrent.yaml b/dts/Bindings/phy/phy-cadence-torrent.yaml index 01dcd14e7b..320a232c72 100644 --- a/dts/Bindings/phy/phy-cadence-torrent.yaml +++ b/dts/Bindings/phy/phy-cadence-torrent.yaml @@ -118,7 +118,7 @@ patternProperties: description: Specifies the Spread Spectrum Clocking mode used. It can be NO_SSC, EXTERNAL_SSC or INTERNAL_SSC. - Refer include/dt-bindings/phy/phy-cadence-torrent.h for the constants to be used. + Refer include/dt-bindings/phy/phy-cadence.h for the constants to be used. $ref: /schemas/types.yaml#/definitions/uint32 enum: [0, 1, 2] default: 0 diff --git a/dts/Bindings/power/supply/sc2731-charger.yaml b/dts/Bindings/power/supply/sc2731-charger.yaml index db1aa238cd..b62c2431f9 100644 --- a/dts/Bindings/power/supply/sc2731-charger.yaml +++ b/dts/Bindings/power/supply/sc2731-charger.yaml @@ -20,7 +20,7 @@ properties: maxItems: 1 phys: - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 description: phandle to the USB phy monitored-battery: diff --git a/dts/Bindings/sound/fsl,rpmsg.yaml b/dts/Bindings/sound/fsl,rpmsg.yaml index b4c190bddd..61802a11ba 100644 --- a/dts/Bindings/sound/fsl,rpmsg.yaml +++ b/dts/Bindings/sound/fsl,rpmsg.yaml @@ -49,7 +49,7 @@ properties: maxItems: 1 memory-region: - $ref: /schemas/types.yaml#/definitions/phandle + maxItems: 1 description: phandle to a node describing reserved memory (System RAM memory) The M core can't access all the DDR memory space on some platform, diff --git a/dts/src/arm64/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi b/dts/src/arm64/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi index c62ddb9b2b..3771144a2c 100644 --- a/dts/src/arm64/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi +++ b/dts/src/arm64/renesas/hihope-rzg2-ex-aistarvision-mipi-adapter-2.1.dtsi @@ -14,7 +14,6 @@ ports { port@0 { - reg = <0>; csi20_in: endpoint { clock-lanes = <0>; data-lanes = <1 2>; @@ -29,7 +28,6 @@ ports { port@0 { - reg = <0>; csi40_in: endpoint { clock-lanes = <0>; data-lanes = <1 2>; diff --git a/dts/src/arm64/renesas/r8a774a1.dtsi b/dts/src/arm64/renesas/r8a774a1.dtsi index d64fb8b1b8..46f8dbf689 100644 --- a/dts/src/arm64/renesas/r8a774a1.dtsi +++ b/dts/src/arm64/renesas/r8a774a1.dtsi @@ -2573,6 +2573,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; @@ -2628,6 +2632,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/renesas/r8a774b1.dtsi b/dts/src/arm64/renesas/r8a774b1.dtsi index 5b05474dc2..d16a4be5ef 100644 --- a/dts/src/arm64/renesas/r8a774b1.dtsi +++ b/dts/src/arm64/renesas/r8a774b1.dtsi @@ -2419,6 +2419,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; @@ -2474,6 +2478,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/renesas/r8a774c0-ek874-mipi-2.1.dts b/dts/src/arm64/renesas/r8a774c0-ek874-mipi-2.1.dts index e7b4a929bb..2e3d1981ca 100644 --- a/dts/src/arm64/renesas/r8a774c0-ek874-mipi-2.1.dts +++ b/dts/src/arm64/renesas/r8a774c0-ek874-mipi-2.1.dts @@ -33,7 +33,7 @@ status = "okay"; ports { - port { + port@0 { csi40_in: endpoint { clock-lanes = <0>; data-lanes = <1 2>; diff --git a/dts/src/arm64/renesas/r8a774c0.dtsi b/dts/src/arm64/renesas/r8a774c0.dtsi index 20fa3caa05..1aef34447a 100644 --- a/dts/src/arm64/renesas/r8a774c0.dtsi +++ b/dts/src/arm64/renesas/r8a774c0.dtsi @@ -1823,6 +1823,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/renesas/r8a774e1.dtsi b/dts/src/arm64/renesas/r8a774e1.dtsi index 8eb006cbd9..1f51237ab0 100644 --- a/dts/src/arm64/renesas/r8a774e1.dtsi +++ b/dts/src/arm64/renesas/r8a774e1.dtsi @@ -2709,6 +2709,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; @@ -2764,6 +2768,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/renesas/r8a77950.dtsi b/dts/src/arm64/renesas/r8a77950.dtsi index 25b87da32e..b643d3079d 100644 --- a/dts/src/arm64/renesas/r8a77950.dtsi +++ b/dts/src/arm64/renesas/r8a77950.dtsi @@ -192,6 +192,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/renesas/r8a77951.dtsi b/dts/src/arm64/renesas/r8a77951.dtsi index 5c39152e45..85d66d1546 100644 --- a/dts/src/arm64/renesas/r8a77951.dtsi +++ b/dts/src/arm64/renesas/r8a77951.dtsi @@ -3097,6 +3097,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; @@ -3152,6 +3156,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; @@ -3191,6 +3199,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/renesas/r8a77960.dtsi b/dts/src/arm64/renesas/r8a77960.dtsi index 25d947a81b..12476e354d 100644 --- a/dts/src/arm64/renesas/r8a77960.dtsi +++ b/dts/src/arm64/renesas/r8a77960.dtsi @@ -2761,6 +2761,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; @@ -2816,6 +2820,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/renesas/r8a77961.dtsi b/dts/src/arm64/renesas/r8a77961.dtsi index ab081f14af..d980476842 100644 --- a/dts/src/arm64/renesas/r8a77961.dtsi +++ b/dts/src/arm64/renesas/r8a77961.dtsi @@ -2499,6 +2499,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; @@ -2554,6 +2558,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/renesas/r8a77965.dtsi b/dts/src/arm64/renesas/r8a77965.dtsi index 657b20d353..dcb9df861d 100644 --- a/dts/src/arm64/renesas/r8a77965.dtsi +++ b/dts/src/arm64/renesas/r8a77965.dtsi @@ -2575,6 +2575,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; @@ -2630,6 +2634,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/renesas/r8a77970.dtsi b/dts/src/arm64/renesas/r8a77970.dtsi index 5a5d564933..e8f6352c36 100644 --- a/dts/src/arm64/renesas/r8a77970.dtsi +++ b/dts/src/arm64/renesas/r8a77970.dtsi @@ -1106,6 +1106,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/renesas/r8a77980.dtsi b/dts/src/arm64/renesas/r8a77980.dtsi index 1ffa4a995a..7b51d464de 100644 --- a/dts/src/arm64/renesas/r8a77980.dtsi +++ b/dts/src/arm64/renesas/r8a77980.dtsi @@ -1439,6 +1439,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; @@ -1478,6 +1482,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/renesas/r8a77990-ebisu.dts b/dts/src/arm64/renesas/r8a77990-ebisu.dts index 295d34f1d2..4715e4a4ab 100644 --- a/dts/src/arm64/renesas/r8a77990-ebisu.dts +++ b/dts/src/arm64/renesas/r8a77990-ebisu.dts @@ -298,8 +298,6 @@ ports { port@0 { - reg = <0>; - csi40_in: endpoint { clock-lanes = <0>; data-lanes = <1 2>; diff --git a/dts/src/arm64/renesas/r8a77990.dtsi b/dts/src/arm64/renesas/r8a77990.dtsi index 5010f23faf..0eaea58f42 100644 --- a/dts/src/arm64/renesas/r8a77990.dtsi +++ b/dts/src/arm64/renesas/r8a77990.dtsi @@ -1970,6 +1970,10 @@ #address-cells = <1>; #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm64/renesas/salvator-common.dtsi b/dts/src/arm64/renesas/salvator-common.dtsi index e18747df21..453ffcef24 100644 --- a/dts/src/arm64/renesas/salvator-common.dtsi +++ b/dts/src/arm64/renesas/salvator-common.dtsi @@ -349,7 +349,6 @@ ports { port@0 { - reg = <0>; csi20_in: endpoint { clock-lanes = <0>; data-lanes = <1>; @@ -364,8 +363,6 @@ ports { port@0 { - reg = <0>; - csi40_in: endpoint { clock-lanes = <0>; data-lanes = <1 2 3 4>; |