diff options
Diffstat (limited to 'dts')
35 files changed, 176 insertions, 142 deletions
diff --git a/dts/Bindings/arm/marvell/cp110-system-controller0.txt b/dts/Bindings/arm/marvell/cp110-system-controller0.txt index 30c546900b..07dbb35818 100644 --- a/dts/Bindings/arm/marvell/cp110-system-controller0.txt +++ b/dts/Bindings/arm/marvell/cp110-system-controller0.txt @@ -45,7 +45,7 @@ The following clocks are available: - 1 15 SATA - 1 16 SATA USB - 1 17 Main - - 1 18 SD/MMC + - 1 18 SD/MMC/GOP - 1 21 Slow IO (SPI, NOR, BootROM, I2C, UART) - 1 22 USB3H0 - 1 23 USB3H1 @@ -65,7 +65,7 @@ Required properties: "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio", "cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none", "cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata", - "cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io", + "cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197"; Example: @@ -78,6 +78,6 @@ Example: gate-clock-output-names = "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio", "cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none", "cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata", - "cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io", + "cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io", "cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197"; }; diff --git a/dts/Bindings/display/exynos/exynos_dsim.txt b/dts/Bindings/display/exynos/exynos_dsim.txt index a782659936..ca5204b3bc 100644 --- a/dts/Bindings/display/exynos/exynos_dsim.txt +++ b/dts/Bindings/display/exynos/exynos_dsim.txt @@ -4,7 +4,6 @@ Required properties: - compatible: value should be one of the following "samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */ "samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */ - "samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */ "samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */ "samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */ "samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */ diff --git a/dts/Bindings/display/exynos/samsung-fimd.txt b/dts/Bindings/display/exynos/samsung-fimd.txt index 18645e0228..5837402c3a 100644 --- a/dts/Bindings/display/exynos/samsung-fimd.txt +++ b/dts/Bindings/display/exynos/samsung-fimd.txt @@ -11,7 +11,6 @@ Required properties: "samsung,s5pv210-fimd"; /* for S5PV210 SoC */ "samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */ "samsung,exynos4210-fimd"; /* for Exynos4 SoCs */ - "samsung,exynos4415-fimd"; /* for Exynos4415 SoC */ "samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */ "samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */ diff --git a/dts/Bindings/mmc/rockchip-dw-mshc.txt b/dts/Bindings/mmc/rockchip-dw-mshc.txt index ea9c1c9607..520d61dad6 100644 --- a/dts/Bindings/mmc/rockchip-dw-mshc.txt +++ b/dts/Bindings/mmc/rockchip-dw-mshc.txt @@ -13,7 +13,7 @@ Required Properties: - "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following, before RK3288 - "rockchip,rk3288-dw-mshc": for Rockchip RK3288 - - "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK1108 + - "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108 - "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036 - "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368 - "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399 diff --git a/dts/Bindings/phy/brcm,nsp-usb3-phy.txt b/dts/Bindings/phy/brcm,nsp-usb3-phy.txt deleted file mode 100644 index e68ae5dec9..0000000000 --- a/dts/Bindings/phy/brcm,nsp-usb3-phy.txt +++ /dev/null @@ -1,39 +0,0 @@ -Broadcom USB3 phy binding for northstar plus SoC -The USB3 phy is internal to the SoC and is accessed using mdio interface. - -Required mdio bus properties: -- reg: Should be 0x0 for SoC internal USB3 phy -- #address-cells: must be 1 -- #size-cells: must be 0 - -Required USB3 PHY properties: -- compatible: should be "brcm,nsp-usb3-phy" -- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10. -- usb3-ctrl-syscon: handler of syscon node defining physical address - of usb3 control register. -- #phy-cells: must be 0 - -Required usb3 control properties: -- compatible: should be "brcm,nsp-usb3-ctrl" -- reg: offset and length of the control registers - -Example: - - mdio@0 { - reg = <0x0>; - #address-cells = <1>; - #size-cells = <0>; - - usb3_phy: usb-phy@10 { - compatible = "brcm,nsp-usb3-phy"; - reg = <0x10>; - usb3-ctrl-syscon = <&usb3_ctrl>; - #phy-cells = <0>; - status = "disabled"; - }; - }; - - usb3_ctrl: syscon@104408 { - compatible = "brcm,nsp-usb3-ctrl", "syscon"; - reg = <0x104408 0x3fc>; - }; diff --git a/dts/Bindings/powerpc/4xx/emac.txt b/dts/Bindings/powerpc/4xx/emac.txt index 712baf6c3e..44b842b6ca 100644 --- a/dts/Bindings/powerpc/4xx/emac.txt +++ b/dts/Bindings/powerpc/4xx/emac.txt @@ -71,6 +71,9 @@ For Axon it can be absent, though my current driver doesn't handle phy-address yet so for now, keep 0x00ffffff in it. + - phy-handle : Used to describe configurations where a external PHY + is used. Please refer to: + Documentation/devicetree/bindings/net/ethernet.txt - rx-fifo-size-gige : 1 cell, Rx fifo size in bytes for 1000 Mb/sec operations (if absent the value is the same as rx-fifo-size). For Axon, either absent or 2048. @@ -81,8 +84,22 @@ offload, phandle of the TAH device node. - tah-channel : 1 cell, optional. If appropriate, channel used on the TAH engine. + - fixed-link : Fixed-link subnode describing a link to a non-MDIO + managed entity. See + Documentation/devicetree/bindings/net/fixed-link.txt + for details. + - mdio subnode : When the EMAC has a phy connected to its local + mdio, which us supported by the kernel's network + PHY library in drivers/net/phy, there must be device + tree subnode with the following required properties: + - #address-cells: Must be <1>. + - #size-cells: Must be <0>. - Example: + For PHY definitions: Please refer to + Documentation/devicetree/bindings/net/phy.txt and + Documentation/devicetree/bindings/net/ethernet.txt + + Examples: EMAC0: ethernet@40000800 { device_type = "network"; @@ -104,6 +121,48 @@ zmii-channel = <0>; }; + EMAC1: ethernet@ef600c00 { + device_type = "network"; + compatible = "ibm,emac-apm821xx", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &UIC2 0x10 IRQ_TYPE_LEVEL_HIGH /* Status */ + 1 &UIC2 0x14 IRQ_TYPE_LEVEL_HIGH /* Wake */>; + reg = <0xef600c00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <16384>; + tx-fifo-size = <2048>; + fifo-entry-size = <10>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; + }; + + ii) McMAL node Required properties: @@ -145,4 +204,3 @@ - revision : as provided by the RGMII new version register if available. For Axon: 0x0000012a - diff --git a/dts/Bindings/regulator/ti-abb-regulator.txt b/dts/Bindings/regulator/ti-abb-regulator.txt index c3f6546eba..6a23ad9ac5 100644 --- a/dts/Bindings/regulator/ti-abb-regulator.txt +++ b/dts/Bindings/regulator/ti-abb-regulator.txt @@ -45,7 +45,7 @@ Required Properties: Optional Properties: - reg-names: In addition to the required properties, the following are optional - "efuse-address" - Contains efuse base address used to pick up ABB info. - - "ldo-address" - Contains address of ABB LDO overide register address. + - "ldo-address" - Contains address of ABB LDO override register. "efuse-address" is required for this. - ti,ldovbb-vset-mask - Required if ldo-address is set, mask for LDO override register to provide override vset value. diff --git a/dts/Bindings/rng/omap_rng.txt b/dts/Bindings/rng/omap_rng.txt index 471477299e..9cf7876ab4 100644 --- a/dts/Bindings/rng/omap_rng.txt +++ b/dts/Bindings/rng/omap_rng.txt @@ -12,7 +12,8 @@ Required properties: - reg : Offset and length of the register set for the module - interrupts : the interrupt number for the RNG module. Used for "ti,omap4-rng" and "inside-secure,safexcel-eip76" -- clocks: the trng clock source +- clocks: the trng clock source. Only mandatory for the + "inside-secure,safexcel-eip76" compatible. Example: /* AM335x */ diff --git a/dts/Bindings/usb/usb251xb.txt b/dts/Bindings/usb/usb251xb.txt index 0c065f7765..3957d4edaa 100644 --- a/dts/Bindings/usb/usb251xb.txt +++ b/dts/Bindings/usb/usb251xb.txt @@ -7,18 +7,18 @@ Required properties : - compatible : Should be "microchip,usb251xb" or one of the specific types: "microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b", "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi" - - hub-reset-gpios : Should specify the gpio for hub reset + - reset-gpios : Should specify the gpio for hub reset + - reg : I2C address on the selected bus (default is <0x2C>) Optional properties : - - reg : I2C address on the selected bus (default is <0x2C>) - skip-config : Skip Hub configuration, but only send the USB-Attach command - - vendor-id : USB Vendor ID of the hub (16 bit, default is 0x0424) - - product-id : USB Product ID of the hub (16 bit, default depends on type) - - device-id : USB Device ID of the hub (16 bit, default is 0x0bb3) - - language-id : USB Language ID (16 bit, default is 0x0000) - - manufacturer : USB Manufacturer string (max 31 characters long) - - product : USB Product string (max 31 characters long) - - serial : USB Serial string (max 31 characters long) + - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424) + - product-id : Set USB Product ID of the hub (16 bit, default depends on type) + - device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3) + - language-id : Set USB Language ID (16 bit, default is 0x0000) + - manufacturer : Set USB Manufacturer string (max 31 characters long) + - product : Set USB Product string (max 31 characters long) + - serial : Set USB Serial string (max 31 characters long) - {bus,self}-powered : selects between self- and bus-powered operation (default is self-powered) - disable-hi-speed : disable USB Hi-Speed support @@ -31,8 +31,10 @@ Optional properties : (default is individual) - dynamic-power-switching : enable auto-switching from self- to bus-powered operation if the local power source is removed or unavailable - - oc-delay-{100us,4ms,8ms,16ms} : set over current timer delay (default is 8ms) - - compound-device : indicated the hub is part of a compound device + - oc-delay-us : Delay time (in microseconds) for filtering the over-current + sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If + an invalid value is given, the default is used instead. + - compound-device : indicate the hub is part of a compound device - port-mapping-mode : enable port mapping mode - string-support : enable string descriptor support (required for manufacturer, product and serial string configuration) @@ -40,34 +42,15 @@ Optional properties : device connected. - sp-disabled-ports : Specifies the ports which will be self-power disabled - bp-disabled-ports : Specifies the ports which will be bus-power disabled - - max-sp-power : Specifies the maximum current the hub consumes from an - upstream port when operating as self-powered hub including the power - consumption of a permanently attached peripheral if the hub is - configured as a compound device. The value is given in mA in a 0 - 500 - range (default is 2). - - max-bp-power : Specifies the maximum current the hub consumes from an - upstream port when operating as bus-powered hub including the power - consumption of a permanently attached peripheral if the hub is - configured as a compound device. The value is given in mA in a 0 - 500 - range (default is 100). - - max-sp-current : Specifies the maximum current the hub consumes from an - upstream port when operating as self-powered hub EXCLUDING the power - consumption of a permanently attached peripheral if the hub is - configured as a compound device. The value is given in mA in a 0 - 500 - range (default is 2). - - max-bp-current : Specifies the maximum current the hub consumes from an - upstream port when operating as bus-powered hub EXCLUDING the power - consumption of a permanently attached peripheral if the hub is - configured as a compound device. The value is given in mA in a 0 - 500 - range (default is 100). - - power-on-time : Specifies the time it takes from the time the host initiates - the power-on sequence to a port until the port has adequate power. The - value is given in ms in a 0 - 510 range (default is 100ms). + - power-on-time-ms : Specifies the time it takes from the time the host + initiates the power-on sequence to a port until the port has adequate + power. The value is given in ms in a 0 - 510 range (default is 100ms). Examples: usb2512b@2c { compatible = "microchip,usb2512b"; - hub-reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + reg = <0x2c>; + reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; usb2514b@2c { diff --git a/dts/include/dt-bindings/sound/cs42l42.h b/dts/include/dt-bindings/sound/cs42l42.h index 399a123aed..db69d84ed7 100644 --- a/dts/include/dt-bindings/sound/cs42l42.h +++ b/dts/include/dt-bindings/sound/cs42l42.h @@ -20,7 +20,7 @@ #define CS42L42_HPOUT_LOAD_1NF 0 #define CS42L42_HPOUT_LOAD_10NF 1 -/* HPOUT Clamp to GND Overide */ +/* HPOUT Clamp to GND Override */ #define CS42L42_HPOUT_CLAMP_EN 0 #define CS42L42_HPOUT_CLAMP_DIS 1 diff --git a/dts/src/arc/skeleton.dtsi b/dts/src/arc/skeleton.dtsi index 65808fe0a2..2891cb266c 100644 --- a/dts/src/arc/skeleton.dtsi +++ b/dts/src/arc/skeleton.dtsi @@ -26,6 +26,7 @@ device_type = "cpu"; compatible = "snps,arc770d"; reg = <0>; + clocks = <&core_clk>; }; }; diff --git a/dts/src/arc/skeleton_hs.dtsi b/dts/src/arc/skeleton_hs.dtsi index 2dfe8037df..5e944d3e5b 100644 --- a/dts/src/arc/skeleton_hs.dtsi +++ b/dts/src/arc/skeleton_hs.dtsi @@ -21,6 +21,7 @@ device_type = "cpu"; compatible = "snps,archs38"; reg = <0>; + clocks = <&core_clk>; }; }; diff --git a/dts/src/arc/skeleton_hs_idu.dtsi b/dts/src/arc/skeleton_hs_idu.dtsi index 4c11079f35..54b277d7de 100644 --- a/dts/src/arc/skeleton_hs_idu.dtsi +++ b/dts/src/arc/skeleton_hs_idu.dtsi @@ -19,8 +19,27 @@ cpu@0 { device_type = "cpu"; - compatible = "snps,archs38xN"; + compatible = "snps,archs38"; reg = <0>; + clocks = <&core_clk>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <1>; + clocks = <&core_clk>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <2>; + clocks = <&core_clk>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <3>; + clocks = <&core_clk>; }; }; diff --git a/dts/src/arc/vdk_axs10x_mb.dtsi b/dts/src/arc/vdk_axs10x_mb.dtsi index f0df59b23e..459fc656b7 100644 --- a/dts/src/arc/vdk_axs10x_mb.dtsi +++ b/dts/src/arc/vdk_axs10x_mb.dtsi @@ -112,13 +112,19 @@ interrupts = <7>; bus-width = <4>; }; + }; - /* Embedded Vision subsystem UIO mappings; only relevant for EV VDK */ - uio_ev: uio@0xD0000000 { - compatible = "generic-uio"; - reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>; - reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem"; - interrupts = <23>; - }; + /* + * Embedded Vision subsystem UIO mappings; only relevant for EV VDK + * + * This node is intentionally put outside of MB above becase + * it maps areas outside of MB's 0xEz-0xFz. + */ + uio_ev: uio@0xD0000000 { + compatible = "generic-uio"; + reg = <0xD0000000 0x2000 0xD1000000 0x2000 0x90000000 0x10000000 0xC0000000 0x10000000>; + reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem"; + interrupt-parent = <&mb_intc>; + interrupts = <23>; }; }; diff --git a/dts/src/arm/am335x-pcm-953.dtsi b/dts/src/arm/am335x-pcm-953.dtsi index 02981eae96..1ec8e0d801 100644 --- a/dts/src/arm/am335x-pcm-953.dtsi +++ b/dts/src/arm/am335x-pcm-953.dtsi @@ -63,14 +63,14 @@ label = "home"; linux,code = <KEY_HOME>; gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; - gpio-key,wakeup; + wakeup-source; }; button@1 { label = "menu"; linux,code = <KEY_MENU>; gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/dts/src/arm/am57xx-idk-common.dtsi b/dts/src/arm/am57xx-idk-common.dtsi index 0d341c545b..e5ac1d81d1 100644 --- a/dts/src/arm/am57xx-idk-common.dtsi +++ b/dts/src/arm/am57xx-idk-common.dtsi @@ -315,6 +315,13 @@ /* ID & VBUS GPIOs provided in board dts */ }; }; + + tpic2810: tpic2810@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + }; }; &mcspi3 { @@ -330,13 +337,6 @@ spi-max-frequency = <1000000>; spi-cpol; }; - - tpic2810: tpic2810@60 { - compatible = "ti,tpic2810"; - reg = <0x60>; - gpio-controller; - #gpio-cells = <2>; - }; }; &uart3 { diff --git a/dts/src/arm/bcm5301x.dtsi b/dts/src/arm/bcm5301x.dtsi index 4fbb089cf5..00de62dc00 100644 --- a/dts/src/arm/bcm5301x.dtsi +++ b/dts/src/arm/bcm5301x.dtsi @@ -66,14 +66,14 @@ timer@20200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x20200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; clocks = <&periph_clk>; }; local-timer@20600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x20600 0x100>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>; clocks = <&periph_clk>; }; diff --git a/dts/src/arm/bcm953012k.dts b/dts/src/arm/bcm953012k.dts index bfd923096a..ae31a5826e 100644 --- a/dts/src/arm/bcm953012k.dts +++ b/dts/src/arm/bcm953012k.dts @@ -48,15 +48,14 @@ }; memory { - reg = <0x00000000 0x10000000>; + reg = <0x80000000 0x10000000>; }; }; &uart0 { - clock-frequency = <62499840>; + status = "okay"; }; &uart1 { - clock-frequency = <62499840>; status = "okay"; }; diff --git a/dts/src/arm/bcm958522er.dts b/dts/src/arm/bcm958522er.dts index 3f04a40eb9..df05e7f568 100644 --- a/dts/src/arm/bcm958522er.dts +++ b/dts/src/arm/bcm958522er.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/dts/src/arm/bcm958525er.dts b/dts/src/arm/bcm958525er.dts index 9fd542200d..4a3ab19c62 100644 --- a/dts/src/arm/bcm958525er.dts +++ b/dts/src/arm/bcm958525er.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/dts/src/arm/bcm958525xmc.dts b/dts/src/arm/bcm958525xmc.dts index 41e7fd350f..81f78435d8 100644 --- a/dts/src/arm/bcm958525xmc.dts +++ b/dts/src/arm/bcm958525xmc.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 31 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/dts/src/arm/bcm958622hr.dts b/dts/src/arm/bcm958622hr.dts index 477c4860db..c88b8fefcb 100644 --- a/dts/src/arm/bcm958622hr.dts +++ b/dts/src/arm/bcm958622hr.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/dts/src/arm/bcm958623hr.dts b/dts/src/arm/bcm958623hr.dts index c0a499d5ba..d503fa0dde 100644 --- a/dts/src/arm/bcm958623hr.dts +++ b/dts/src/arm/bcm958623hr.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/dts/src/arm/bcm958625hr.dts b/dts/src/arm/bcm958625hr.dts index f7eb5854a2..cc0363b843 100644 --- a/dts/src/arm/bcm958625hr.dts +++ b/dts/src/arm/bcm958625hr.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/dts/src/arm/bcm988312hr.dts b/dts/src/arm/bcm988312hr.dts index 16666324fd..74e15a3cd9 100644 --- a/dts/src/arm/bcm988312hr.dts +++ b/dts/src/arm/bcm988312hr.dts @@ -55,6 +55,7 @@ gpio-restart { compatible = "gpio-restart"; gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + open-source; priority = <200>; }; }; diff --git a/dts/src/arm/imx6sx-udoo-neo.dtsi b/dts/src/arm/imx6sx-udoo-neo.dtsi index 49f466fe0b..dcfc975914 100644 --- a/dts/src/arm/imx6sx-udoo-neo.dtsi +++ b/dts/src/arm/imx6sx-udoo-neo.dtsi @@ -121,11 +121,6 @@ }; }; -&cpu0 { - arm-supply = <&sw1a_reg>; - soc-supply = <&sw1c_reg>; -}; - &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; diff --git a/dts/src/arm/sama5d2.dtsi b/dts/src/arm/sama5d2.dtsi index 22332be721..528b4e9c6d 100644 --- a/dts/src/arm/sama5d2.dtsi +++ b/dts/src/arm/sama5d2.dtsi @@ -266,7 +266,7 @@ }; usb1: ohci@00400000 { - compatible = "atmel,sama5d2-ohci", "usb-ohci"; + compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00400000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; diff --git a/dts/src/arm/ste-dbx5x0.dtsi b/dts/src/arm/ste-dbx5x0.dtsi index 82d8c47712..162e1eb537 100644 --- a/dts/src/arm/ste-dbx5x0.dtsi +++ b/dts/src/arm/ste-dbx5x0.dtsi @@ -14,6 +14,7 @@ #include <dt-bindings/mfd/dbx500-prcmu.h> #include <dt-bindings/arm/ux500_pm_domains.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/ste-ab8500.h> #include "skeleton.dtsi" / { @@ -603,6 +604,11 @@ interrupt-controller; #interrupt-cells = <2>; + ab8500_clock: clock-controller { + compatible = "stericsson,ab8500-clk"; + #clock-cells = <1>; + }; + ab8500_gpio: ab8500-gpio { compatible = "stericsson,ab8500-gpio"; gpio-controller; @@ -686,6 +692,8 @@ ab8500-pwm { compatible = "stericsson,ab8500-pwm"; + clocks = <&ab8500_clock AB8500_SYSCLK_INT>; + clock-names = "intclk"; }; ab8500-debugfs { @@ -700,6 +708,9 @@ V-AMIC2-supply = <&ab8500_ldo_anamic2_reg>; V-DMIC-supply = <&ab8500_ldo_dmic_reg>; + clocks = <&ab8500_clock AB8500_SYSCLK_AUDIO>; + clock-names = "audioclk"; + stericsson,earpeice-cmv = <950>; /* Units in mV. */ }; @@ -1095,6 +1106,14 @@ status = "disabled"; }; + sound { + compatible = "stericsson,snd-soc-mop500"; + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + clocks = <&prcmu_clk PRCMU_SYSCLK>, <&ab8500_clock AB8500_SYSCLK_ULP>, <&ab8500_clock AB8500_SYSCLK_INT>; + clock-names = "sysclk", "ulpclk", "intclk"; + }; + msp0: msp@80123000 { compatible = "stericsson,ux500-msp-i2s"; reg = <0x80123000 0x1000>; diff --git a/dts/src/arm/ste-href.dtsi b/dts/src/arm/ste-href.dtsi index f37f9e1071..9e359e4f34 100644 --- a/dts/src/arm/ste-href.dtsi +++ b/dts/src/arm/ste-href.dtsi @@ -186,15 +186,6 @@ status = "okay"; }; - sound { - compatible = "stericsson,snd-soc-mop500"; - - stericsson,cpu-dai = <&msp1 &msp3>; - stericsson,audio-codec = <&codec>; - clocks = <&prcmu_clk PRCMU_SYSCLK>; - clock-names = "sysclk"; - }; - msp0: msp@80123000 { pinctrl-names = "default"; pinctrl-0 = <&msp0_default_mode>; diff --git a/dts/src/arm/ste-snowball.dts b/dts/src/arm/ste-snowball.dts index dd5514def6..ade1d0d4e5 100644 --- a/dts/src/arm/ste-snowball.dts +++ b/dts/src/arm/ste-snowball.dts @@ -159,15 +159,6 @@ "", "", "", "", "", "", "", ""; }; - sound { - compatible = "stericsson,snd-soc-mop500"; - - stericsson,cpu-dai = <&msp1 &msp3>; - stericsson,audio-codec = <&codec>; - clocks = <&prcmu_clk PRCMU_SYSCLK>; - clock-names = "sysclk"; - }; - msp0: msp@80123000 { pinctrl-names = "default"; pinctrl-0 = <&msp0_default_mode>; diff --git a/dts/src/arm/sun7i-a20-lamobo-r1.dts b/dts/src/arm/sun7i-a20-lamobo-r1.dts index 72ec0d5ae0..bbf1c8cbaa 100644 --- a/dts/src/arm/sun7i-a20-lamobo-r1.dts +++ b/dts/src/arm/sun7i-a20-lamobo-r1.dts @@ -167,7 +167,7 @@ reg = <8>; label = "cpu"; ethernet = <&gmac>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; fixed-link { speed = <1000>; full-duplex; diff --git a/dts/src/arm/sun8i-a23-a33.dtsi b/dts/src/arm/sun8i-a23-a33.dtsi index a952cc0703..8a3ed21cb7 100644 --- a/dts/src/arm/sun8i-a23-a33.dtsi +++ b/dts/src/arm/sun8i-a23-a33.dtsi @@ -495,7 +495,7 @@ resets = <&ccu RST_BUS_GPU>; assigned-clocks = <&ccu CLK_GPU>; - assigned-clock-rates = <408000000>; + assigned-clock-rates = <384000000>; }; gic: interrupt-controller@01c81000 { diff --git a/dts/src/arm/sun8i-a33.dtsi b/dts/src/arm/sun8i-a33.dtsi index 18c174fef8..0467fb365b 100644 --- a/dts/src/arm/sun8i-a33.dtsi +++ b/dts/src/arm/sun8i-a33.dtsi @@ -113,8 +113,8 @@ simple-audio-card,mclk-fs = <512>; simple-audio-card,aux-devs = <&codec_analog>; simple-audio-card,routing = - "Left DAC", "Digital Left DAC", - "Right DAC", "Digital Right DAC"; + "Left DAC", "AIF1 Slot 0 Left", + "Right DAC", "AIF1 Slot 0 Right"; status = "disabled"; simple-audio-card,cpu { diff --git a/dts/src/arm/sun8i-reference-design-tablet.dtsi b/dts/src/arm/sun8i-reference-design-tablet.dtsi index 7097c18ff4..d6bd15898d 100644 --- a/dts/src/arm/sun8i-reference-design-tablet.dtsi +++ b/dts/src/arm/sun8i-reference-design-tablet.dtsi @@ -50,8 +50,6 @@ backlight: backlight { compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin>; pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; @@ -93,11 +91,6 @@ }; &pio { - bl_en_pin: bl_en_pin@0 { - pins = "PH6"; - function = "gpio_in"; - }; - mmc0_cd_pin: mmc0_cd_pin@0 { pins = "PB4"; function = "gpio_in"; diff --git a/dts/src/arm64/broadcom/ns2.dtsi b/dts/src/arm64/broadcom/ns2.dtsi index 9f9e203c09..bcb03fc326 100644 --- a/dts/src/arm64/broadcom/ns2.dtsi +++ b/dts/src/arm64/broadcom/ns2.dtsi @@ -114,6 +114,7 @@ pcie0: pcie@20020000 { compatible = "brcm,iproc-pcie"; reg = <0 0x20020000 0 0x1000>; + dma-coherent; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; @@ -144,6 +145,7 @@ pcie4: pcie@50020000 { compatible = "brcm,iproc-pcie"; reg = <0 0x50020000 0 0x1000>; + dma-coherent; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0>; @@ -174,6 +176,7 @@ pcie8: pcie@60c00000 { compatible = "brcm,iproc-pcie-paxc"; reg = <0 0x60c00000 0 0x1000>; + dma-coherent; linux,pci-domain = <8>; bus-range = <0x0 0x1>; @@ -203,6 +206,7 @@ <0x61030000 0x100>; reg-names = "amac_base", "idm_base", "nicpm_base"; interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; phy-handle = <&gphy0>; phy-mode = "rgmii"; status = "disabled"; @@ -213,6 +217,7 @@ reg = <0x612c0000 0x445>; /* PDC FS0 regs */ interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; #mbox-cells = <1>; + dma-coherent; brcm,rx-status-len = <32>; brcm,use-bcm-hdr; }; @@ -222,6 +227,7 @@ reg = <0x612e0000 0x445>; /* PDC FS1 regs */ interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; #mbox-cells = <1>; + dma-coherent; brcm,rx-status-len = <32>; brcm,use-bcm-hdr; }; @@ -231,6 +237,7 @@ reg = <0x61300000 0x445>; /* PDC FS2 regs */ interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; #mbox-cells = <1>; + dma-coherent; brcm,rx-status-len = <32>; brcm,use-bcm-hdr; }; @@ -240,6 +247,7 @@ reg = <0x61320000 0x445>; /* PDC FS3 regs */ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; #mbox-cells = <1>; + dma-coherent; brcm,rx-status-len = <32>; brcm,use-bcm-hdr; }; @@ -644,6 +652,7 @@ sata: ahci@663f2000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x663f2000 0x1000>; + dma-coherent; reg-names = "ahci"; interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; @@ -667,6 +676,7 @@ compatible = "brcm,sdhci-iproc-cygnus"; reg = <0x66420000 0x100>; interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; bus-width = <8>; clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; status = "disabled"; @@ -676,6 +686,7 @@ compatible = "brcm,sdhci-iproc-cygnus"; reg = <0x66430000 0x100>; interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + dma-coherent; bus-width = <8>; clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; status = "disabled"; |