diff options
Diffstat (limited to 'dts')
766 files changed, 39469 insertions, 9165 deletions
diff --git a/dts/Bindings/arm/amlogic,scpi.txt b/dts/Bindings/arm/amlogic,scpi.txt new file mode 100644 index 0000000000..7b9a861e93 --- /dev/null +++ b/dts/Bindings/arm/amlogic,scpi.txt @@ -0,0 +1,20 @@ +System Control and Power Interface (SCPI) Message Protocol +(in addition to the standard binding in [0]) +---------------------------------------------------------- +Required properties + +- compatible : should be "amlogic,meson-gxbb-scpi" + +AMLOGIC SRAM and Shared Memory for SCPI +------------------------------------ + +Required properties: +- compatible : should be "amlogic,meson-gxbb-sram" + +Each sub-node represents the reserved area for SCPI. + +Required sub-node properties: +- compatible : should be "amlogic,meson-gxbb-scp-shmem" for SRAM based shared + memory on Amlogic GXBB SoC. + +[0] Documentation/devicetree/bindings/arm/arm,scpi.txt diff --git a/dts/Bindings/arm/amlogic.txt b/dts/Bindings/arm/amlogic.txt index fcc6f6c108..9b2b41ab68 100644 --- a/dts/Bindings/arm/amlogic.txt +++ b/dts/Bindings/arm/amlogic.txt @@ -17,6 +17,18 @@ Boards with the Amlogic Meson GXBaby SoC shall have the following properties: Required root node property: compatible: "amlogic,meson-gxbb"; +Boards with the Amlogic Meson GXL S905X SoC shall have the following properties: + Required root node property: + compatible: "amlogic,s905x", "amlogic,meson-gxl"; + +Boards with the Amlogic Meson GXL S905D SoC shall have the following properties: + Required root node property: + compatible: "amlogic,s905d", "amlogic,meson-gxl"; + +Boards with the Amlogic Meson GXM S912 SoC shall have the following properties: + Required root node property: + compatible: "amlogic,s912", "amlogic,meson-gxm"; + Board compatible values: - "geniatech,atv1200" (Meson6) - "minix,neo-x8" (Meson8) @@ -28,3 +40,10 @@ Board compatible values: - "hardkernel,odroid-c2" (Meson gxbb) - "amlogic,p200" (Meson gxbb) - "amlogic,p201" (Meson gxbb) + - "amlogic,p212" (Meson gxl s905x) + - "amlogic,p230" (Meson gxl s905d) + - "amlogic,p231" (Meson gxl s905d) + - "amlogic,q200" (Meson gxm s912) + - "amlogic,q201" (Meson gxm s912) + - "nexbox,a95x" (Meson gxbb or Meson gxl s905x) + - "nexbox,a1" (Meson gxm s912) diff --git a/dts/Bindings/arm/arch_timer.txt b/dts/Bindings/arm/arch_timer.txt index ef5fbe9a77..ad440a2b80 100644 --- a/dts/Bindings/arm/arch_timer.txt +++ b/dts/Bindings/arm/arch_timer.txt @@ -38,6 +38,11 @@ to deliver its interrupts via SPIs. architecturally-defined reset values. Only supported for 32-bit systems which follow the ARMv7 architected reset values. +- arm,no-tick-in-suspend : The main counter does not tick when the system is in + low-power system suspend on some SoCs. This behavior does not match the + Architecture Reference Manual's specification that the system counter "must + be implemented in an always-on power domain." + Example: diff --git a/dts/Bindings/arm/arm,scpi.txt b/dts/Bindings/arm/arm,scpi.txt index faa4b44572..4018319736 100644 --- a/dts/Bindings/arm/arm,scpi.txt +++ b/dts/Bindings/arm/arm,scpi.txt @@ -7,7 +7,10 @@ by Linux to initiate various system control and power operations. Required properties: -- compatible : should be "arm,scpi" +- compatible : should be + * "arm,scpi" : For implementations complying to SCPI v1.0 or above + * "arm,scpi-pre-1.0" : For implementations complying to all + unversioned releases prior to SCPI v1.0 - mboxes: List of phandle and mailbox channel specifiers All the channels reserved by remote SCP firmware for use by SCPI message protocol should be specified in any order @@ -59,18 +62,14 @@ SRAM and Shared Memory for SCPI A small area of SRAM is reserved for SCPI communication between application processors and SCP. -Required properties: -- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno - -The rest of the properties should follow the generic mmio-sram description -found in ../../sram/sram.txt +The properties should follow the generic mmio-sram description found in [3] Each sub-node represents the reserved area for SCPI. Required sub-node properties: - reg : The base offset and size of the reserved area with the SRAM -- compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based - shared memory on Juno platforms +- compatible : should be "arm,scp-shmem" for Non-secure SRAM based + shared memory Sensor bindings for the sensors based on SCPI Message Protocol -------------------------------------------------------------- @@ -81,11 +80,9 @@ Required properties: - #thermal-sensor-cells: should be set to 1. This property follows the thermal device tree bindings[2]. - Valid cell values are raw identifiers (Sensor - ID) as used by the firmware. Refer to - platform documentation for your - implementation for the IDs to use. For Juno - R0 and Juno R1 refer to [3]. + Valid cell values are raw identifiers (Sensor ID) + as used by the firmware. Refer to platform details + for your implementation for the IDs to use. Power domain bindings for the power domains based on SCPI Message Protocol ------------------------------------------------------------ @@ -112,7 +109,7 @@ Required properties: [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html [1] Documentation/devicetree/bindings/clock/clock-bindings.txt [2] Documentation/devicetree/bindings/thermal/thermal.txt -[3] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html +[3] Documentation/devicetree/bindings/sram/sram.txt [4] Documentation/devicetree/bindings/power/power_domain.txt Example: diff --git a/dts/Bindings/arm/arm-boards b/dts/Bindings/arm/arm-boards index ab318a56fc..b6e810c278 100644 --- a/dts/Bindings/arm/arm-boards +++ b/dts/Bindings/arm/arm-boards @@ -148,11 +148,12 @@ Example: /dts-v1/; #include <dt-bindings/interrupt-controller/irq.h> -#include "skeleton.dtsi" / { model = "ARM RealView PB1176 with device tree"; compatible = "arm,realview-pb1176"; + #address-cells = <1>; + #size-cells = <1>; soc { #address-cells = <1>; diff --git a/dts/Bindings/arm/atmel-at91.txt b/dts/Bindings/arm/atmel-at91.txt index e1f5ad855f..29737b9b61 100644 --- a/dts/Bindings/arm/atmel-at91.txt +++ b/dts/Bindings/arm/atmel-at91.txt @@ -225,3 +225,19 @@ required properties: compatible = "atmel,sama5d3-sfr", "syscon"; reg = <0xf0038000 0x60>; }; + +Security Module (SECUMOD) + +The Security Module macrocell provides all necessary secure functions to avoid +voltage, temperature, frequency and mechanical attacks on the chip. It also +embeds secure memories that can be scrambled + +required properties: +- compatible: Should be "atmel,<chip>-secumod", "syscon". + <chip> can be "sama5d2". +- reg: Should contain registers location and length + + secumod@fc040000 { + compatible = "atmel,sama5d2-secumod", "syscon"; + reg = <0xfc040000 0x100>; + }; diff --git a/dts/Bindings/arm/bcm/ns2.txt b/dts/Bindings/arm/bcm/brcm,ns2.txt index 35f056f4a1..35f056f4a1 100644 --- a/dts/Bindings/arm/bcm/ns2.txt +++ b/dts/Bindings/arm/bcm/brcm,ns2.txt diff --git a/dts/Bindings/arm/cpu-capacity.txt b/dts/Bindings/arm/cpu-capacity.txt new file mode 100644 index 0000000000..7809fbe0cd --- /dev/null +++ b/dts/Bindings/arm/cpu-capacity.txt @@ -0,0 +1,236 @@ +========================================== +ARM CPUs capacity bindings +========================================== + +========================================== +1 - Introduction +========================================== + +ARM systems may be configured to have cpus with different power/performance +characteristics within the same chip. In this case, additional information has +to be made available to the kernel for it to be aware of such differences and +take decisions accordingly. + +========================================== +2 - CPU capacity definition +========================================== + +CPU capacity is a number that provides the scheduler information about CPUs +heterogeneity. Such heterogeneity can come from micro-architectural differences +(e.g., ARM big.LITTLE systems) or maximum frequency at which CPUs can run +(e.g., SMP systems with multiple frequency domains). Heterogeneity in this +context is about differing performance characteristics; this binding tries to +capture a first-order approximation of the relative performance of CPUs. + +CPU capacities are obtained by running a suitable benchmark. This binding makes +no guarantees on the validity or suitability of any particular benchmark, the +final capacity should, however, be: + +* A "single-threaded" or CPU affine benchmark +* Divided by the running frequency of the CPU executing the benchmark +* Not subject to dynamic frequency scaling of the CPU + +For the time being we however advise usage of the Dhrystone benchmark. What +above thus becomes: + +CPU capacities are obtained by running the Dhrystone benchmark on each CPU at +max frequency (with caches enabled). The obtained DMIPS score is then divided +by the frequency (in MHz) at which the benchmark has been run, so that +DMIPS/MHz are obtained. Such values are then normalized w.r.t. the highest +score obtained in the system. + +========================================== +3 - capacity-dmips-mhz +========================================== + +capacity-dmips-mhz is an optional cpu node [1] property: u32 value +representing CPU capacity expressed in normalized DMIPS/MHz. At boot time, the +maximum frequency available to the cpu is then used to calculate the capacity +value internally used by the kernel. + +capacity-dmips-mhz property is all-or-nothing: if it is specified for a cpu +node, it has to be specified for every other cpu nodes, or the system will +fall back to the default capacity value for every CPU. If cpufreq is not +available, final capacities are calculated by directly using capacity-dmips- +mhz values (normalized w.r.t. the highest value found while parsing the DT). + +=========================================== +4 - Examples +=========================================== + +Example 1 (ARM 64-bit, 6-cpu system, two clusters): +capacities-dmips-mhz are scaled w.r.t. 1024 (cpu@0 and cpu@1) +supposing cluster0@max-freq=1100 and custer1@max-freq=850, +final capacities are 1024 for cluster0 and 446 for cluster1 + +cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&A57_0>; + }; + core1 { + cpu = <&A57_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&A53_0>; + }; + core1 { + cpu = <&A53_1>; + }; + core2 { + cpu = <&A53_2>; + }; + core3 { + cpu = <&A53_3>; + }; + }; + }; + + idle-states { + entry-method = "arm,psci"; + + CPU_SLEEP_0: cpu-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x0010000>; + local-timer-stop; + entry-latency-us = <100>; + exit-latency-us = <250>; + min-residency-us = <150>; + }; + + CLUSTER_SLEEP_0: cluster-sleep-0 { + compatible = "arm,idle-state"; + arm,psci-suspend-param = <0x1010000>; + local-timer-stop; + entry-latency-us = <800>; + exit-latency-us = <700>; + min-residency-us = <2500>; + }; + }; + + A57_0: cpu@0 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x0>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A57_L2>; + clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; + }; + + A57_1: cpu@1 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x1>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A57_L2>; + clocks = <&scpi_dvfs 0>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; + }; + + A53_0: cpu@100 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x100>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; + }; + + A53_1: cpu@101 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x101>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; + }; + + A53_2: cpu@102 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x102>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; + }; + + A53_3: cpu@103 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x103>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; + }; + + A57_L2: l2-cache0 { + compatible = "cache"; + }; + + A53_L2: l2-cache1 { + compatible = "cache"; + }; +}; + +Example 2 (ARM 32-bit, 4-cpu system, two clusters, + cpus 0,1@1GHz, cpus 2,3@500MHz): +capacities-dmips-mhz are scaled w.r.t. 2 (cpu@0 and cpu@1), this means that first +cpu@0 and cpu@1 are twice fast than cpu@2 and cpu@3 (at the same frequency) + +cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + capacity-dmips-mhz = <2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + capacity-dmips-mhz = <2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x100>; + capacity-dmips-mhz = <1>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x101>; + capacity-dmips-mhz = <1>; + }; +}; + +=========================================== +5 - References +=========================================== + +[1] ARM Linux Kernel documentation - CPUs bindings + Documentation/devicetree/bindings/arm/cpus.txt diff --git a/dts/Bindings/arm/cpus.txt b/dts/Bindings/arm/cpus.txt index e6782d50cb..a1bcfeed5f 100644 --- a/dts/Bindings/arm/cpus.txt +++ b/dts/Bindings/arm/cpus.txt @@ -178,6 +178,7 @@ nodes to be present and contain the properties described below. "marvell,pj4b" "marvell,sheeva-v5" "nvidia,tegra132-denver" + "nvidia,tegra186-denver" "qcom,krait" "qcom,kryo" "qcom,scorpion" @@ -241,6 +242,14 @@ nodes to be present and contain the properties described below. # List of phandles to idle state nodes supported by this cpu [3]. + - capacity-dmips-mhz + Usage: Optional + Value type: <u32> + Definition: + # u32 value representing CPU capacity [3] in + DMIPS/MHz, relative to highest capacity-dmips-mhz + in the system. + - rockchip,pmu Usage: optional for systems that have an "enable-method" property value of "rockchip,rk3066-smp" @@ -464,3 +473,5 @@ cpus { [2] arm/msm/qcom,kpss-acc.txt [3] ARM Linux kernel documentation - idle states bindings Documentation/devicetree/bindings/arm/idle-states.txt +[3] ARM Linux kernel documentation - cpu capacity bindings + Documentation/devicetree/bindings/arm/cpu-capacity.txt diff --git a/dts/Bindings/arm/fsl.txt b/dts/Bindings/arm/fsl.txt index dbbc095202..d6ee9c6e1d 100644 --- a/dts/Bindings/arm/fsl.txt +++ b/dts/Bindings/arm/fsl.txt @@ -97,7 +97,7 @@ Freescale LS1021A Platform Device Tree Bindings Required root node compatible properties: - compatible = "fsl,ls1021a"; -Freescale LS1021A SoC-specific Device Tree Bindings +Freescale SoC-specific Device Tree Bindings ------------------------------------------- Freescale SCFG @@ -105,7 +105,11 @@ Freescale SCFG configuration and status registers for the chip. Such as getting PEX port status. Required properties: - - compatible: should be "fsl,ls1021a-scfg" + - compatible: Should contain a chip-specific compatible string, + Chip-specific strings are of the form "fsl,<chip>-scfg", + The following <chip>s are known to be supported: + ls1021a, ls1043a, ls1046a, ls2080a. + - reg: should contain base address and length of SCFG memory-mapped registers Example: @@ -119,7 +123,11 @@ Freescale DCFG configuration and status for the device. Such as setting the secondary core start address and release the secondary core from holdoff and startup. Required properties: - - compatible: should be "fsl,ls1021a-dcfg" + - compatible: Should contain a chip-specific compatible string, + Chip-specific strings are of the form "fsl,<chip>-dcfg", + The following <chip>s are known to be supported: + ls1021a, ls1043a, ls1046a, ls2080a. + - reg : should contain base address and length of DCFG memory-mapped registers Example: @@ -131,6 +139,10 @@ Example: Freescale ARMv8 based Layerscape SoC family Device Tree Bindings ---------------------------------------------------------------- +LS1043A SoC +Required root node properties: + - compatible = "fsl,ls1043a"; + LS1043A ARMv8 based RDB Board Required root node properties: - compatible = "fsl,ls1043a-rdb", "fsl,ls1043a"; @@ -139,6 +151,22 @@ LS1043A ARMv8 based QDS Board Required root node properties: - compatible = "fsl,ls1043a-qds", "fsl,ls1043a"; +LS1046A SoC +Required root node properties: + - compatible = "fsl,ls1046a"; + +LS1046A ARMv8 based QDS Board +Required root node properties: + - compatible = "fsl,ls1046a-qds", "fsl,ls1046a"; + +LS1046A ARMv8 based RDB Board +Required root node properties: + - compatible = "fsl,ls1046a-rdb", "fsl,ls1046a"; + +LS2080A SoC +Required root node properties: + - compatible = "fsl,ls2080a"; + LS2080A ARMv8 based Simulator model Required root node properties: - compatible = "fsl,ls2080a-simu", "fsl,ls2080a"; diff --git a/dts/Bindings/arm/hisilicon/hisilicon.txt b/dts/Bindings/arm/hisilicon/hisilicon.txt index 3f81575aa6..7df79a7156 100644 --- a/dts/Bindings/arm/hisilicon/hisilicon.txt +++ b/dts/Bindings/arm/hisilicon/hisilicon.txt @@ -28,6 +28,10 @@ HiP06 D03 Board Required root node properties: - compatible = "hisilicon,hip06-d03"; +HiP07 D05 Board +Required root node properties: + - compatible = "hisilicon,hip07-d05"; + Hisilicon system controller Required properties: diff --git a/dts/Bindings/arm/juno,scpi.txt b/dts/Bindings/arm/juno,scpi.txt new file mode 100644 index 0000000000..2ace8696bb --- /dev/null +++ b/dts/Bindings/arm/juno,scpi.txt @@ -0,0 +1,26 @@ +System Control and Power Interface (SCPI) Message Protocol +(in addition to the standard binding in [0]) + +Juno SRAM and Shared Memory for SCPI +------------------------------------ + +Required properties: +- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM + +Each sub-node represents the reserved area for SCPI. + +Required sub-node properties: +- reg : The base offset and size of the reserved area with the SRAM +- compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based + shared memory on Juno platforms + +Sensor bindings for the sensors based on SCPI Message Protocol +-------------------------------------------------------------- +Required properties: +- compatible : should be "arm,scpi-sensors". +- #thermal-sensor-cells: should be set to 1. + For Juno R0 and Juno R1 refer to [1] for the + sensor identifiers + +[0] Documentation/devicetree/bindings/arm/arm,scpi.txt +[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html diff --git a/dts/Bindings/arm/keystone/ti,sci.txt b/dts/Bindings/arm/keystone/ti,sci.txt new file mode 100644 index 0000000000..31f5f9a104 --- /dev/null +++ b/dts/Bindings/arm/keystone/ti,sci.txt @@ -0,0 +1,81 @@ +Texas Instruments System Control Interface (TI-SCI) Message Protocol +-------------------------------------------------------------------- + +Texas Instrument's processors including those belonging to Keystone generation +of processors have separate hardware entity which is now responsible for the +management of the System on Chip (SoC) system. These include various system +level functions as well. + +An example of such an SoC is K2G, which contains the system control hardware +block called Power Management Micro Controller (PMMC). This hardware block is +initialized early into boot process and provides services to Operating Systems +on multiple processors including ones running Linux. + +See http://processors.wiki.ti.com/index.php/TISCI for protocol definition. + +TI-SCI controller Device Node: +============================= + +The TI-SCI node describes the Texas Instrument's System Controller entity node. +This parent node may optionally have additional children nodes which describe +specific functionality such as clocks, power domain, reset or additional +functionality as may be required for the SoC. This hierarchy also describes the +relationship between the TI-SCI parent node to the child node. + +Required properties: +------------------- +- compatible: should be "ti,k2g-sci" +- mbox-names: + "rx" - Mailbox corresponding to receive path + "tx" - Mailbox corresponding to transmit path + +- mboxes: Mailboxes corresponding to the mbox-names. Each value of the mboxes + property should contain a phandle to the mailbox controller device + node and an args specifier that will be the phandle to the intended + sub-mailbox child node to be used for communication. + +See Documentation/devicetree/bindings/mailbox/mailbox.txt for more details +about the generic mailbox controller and client driver bindings. Also see +Documentation/devicetree/bindings/mailbox/ti,message-manager.txt for typical +controller that is used to communicate with this System controllers. + +Optional Properties: +------------------- +- reg-names: + debug_messages - Map the Debug message region +- reg: register space corresponding to the debug_messages +- ti,system-reboot-controller: If system reboot can be triggered by SoC reboot + +Example (K2G): +------------- + pmmc: pmmc { + compatible = "ti,k2g-sci"; + mbox-names = "rx", "tx"; + mboxes= <&msgmgr &msgmgr_proxy_pmmc_rx>, + <&msgmgr &msgmgr_proxy_pmmc_tx>; + reg-names = "debug_messages"; + reg = <0x02921800 0x800>; + }; + + +TI-SCI Client Device Node: +========================= + +Client nodes are maintained as children of the relevant TI-SCI device node. + +Example (K2G): +------------- + pmmc: pmmc { + compatible = "ti,k2g-sci"; + ... + + my_clk_node: clk_node { + ... + ... + }; + + my_pd_node: pd_node { + ... + ... + }; + }; diff --git a/dts/Bindings/arm/omap/omap.txt b/dts/Bindings/arm/omap/omap.txt index f53e2ee65e..05f95c3ed7 100644 --- a/dts/Bindings/arm/omap/omap.txt +++ b/dts/Bindings/arm/omap/omap.txt @@ -86,6 +86,9 @@ SoCs: - DRA722 compatible = "ti,dra722", "ti,dra72", "ti,dra7" +- DRA718 + compatible = "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7" + - AM5728 compatible = "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7" @@ -175,12 +178,18 @@ Boards: - AM5728 IDK compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7" +- AM5718 IDK + compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7" + - DRA742 EVM: Software Development Board for DRA742 compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7" - DRA722 EVM: Software Development Board for DRA722 compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7" +- DRA718 EVM: Software Development Board for DRA718 + compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7" + - DM3730 Logic PD Torpedo + Wireless: Commercial System on Module with WiFi and Bluetooth compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap3630", "ti,omap3" diff --git a/dts/Bindings/arm/oxnas.txt b/dts/Bindings/arm/oxnas.txt index b9e49711ba..ac64e60f99 100644 --- a/dts/Bindings/arm/oxnas.txt +++ b/dts/Bindings/arm/oxnas.txt @@ -5,5 +5,10 @@ Boards with the OX810SE SoC shall have the following properties: Required root node property: compatible: "oxsemi,ox810se" +Boards with the OX820 SoC shall have the following properties: + Required root node property: + compatible: "oxsemi,ox820" + Board compatible values: - "wd,mbwe" (OX810SE) + - "cloudengines,pogoplugv3" (OX820) diff --git a/dts/Bindings/arm/qcom.txt b/dts/Bindings/arm/qcom.txt index 3e24518c66..028d16e721 100644 --- a/dts/Bindings/arm/qcom.txt +++ b/dts/Bindings/arm/qcom.txt @@ -21,7 +21,10 @@ The 'SoC' element must be one of the following strings: apq8096 msm8916 msm8974 + msm8992 + msm8994 msm8996 + mdm9615 The 'board' element must be one of the following strings: diff --git a/dts/Bindings/arm/rockchip.txt b/dts/Bindings/arm/rockchip.txt index 55f388f954..cc4ace6397 100644 --- a/dts/Bindings/arm/rockchip.txt +++ b/dts/Bindings/arm/rockchip.txt @@ -25,6 +25,10 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "radxa,rock2-square", "rockchip,rk3288"; +- Rikomagic MK808 v1 board: + Required root node properties: + - compatible = "rikomagic,mk808", "rockchip,rk3066a"; + - Firefly Firefly-RK3288 board: Required root node properties: - compatible = "firefly,firefly-rk3288", "rockchip,rk3288"; @@ -99,6 +103,18 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "mqmaker,miqi", "rockchip,rk3288"; +- Rockchip PX3 Evaluation board: + Required root node properties: + - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188"; + +- Rockchip PX5 Evaluation board: + Required root node properties: + - compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368"; + +- Rockchip RK1108 Evaluation board + Required root node properties: + - compatible = "rockchip,rk1108-evb", "rockchip,rk1108"; + - Rockchip RK3368 evb: Required root node properties: - compatible = "rockchip,rk3368-evb-act8846", "rockchip,rk3368"; diff --git a/dts/Bindings/arm/samsung/samsung-boards.txt b/dts/Bindings/arm/samsung/samsung-boards.txt index 0ea7f14ef2..3c551894f6 100644 --- a/dts/Bindings/arm/samsung/samsung-boards.txt +++ b/dts/Bindings/arm/samsung/samsung-boards.txt @@ -15,6 +15,8 @@ Required root node properties: - "samsung,xyref5260" - for Exynos5260-based Samsung board. - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board. - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board. + - "samsung,tm2" - for Exynos5433-based Samsung TM2 board. + - "samsung,tm2e" - for Exynos5433-based Samsung TM2E board. - "samsung,sd5v1" - for Exynos5440-based Samsung board. - "samsung,ssdk5440" - for Exynos5440-based Samsung board. @@ -22,6 +24,9 @@ Required root node properties: * FriendlyARM - "friendlyarm,tiny4412" - for Exynos4412-based FriendlyARM TINY4412 board. + * TOPEET + - "topeet,itop4412-elite" - for Exynos4412-based TOPEET + Elite base board. * Google - "google,pi" - for Exynos5800-based Google Peach Pi diff --git a/dts/Bindings/arm/shmobile.txt b/dts/Bindings/arm/shmobile.txt index 2f0b7169f1..253bf9b866 100644 --- a/dts/Bindings/arm/shmobile.txt +++ b/dts/Bindings/arm/shmobile.txt @@ -13,6 +13,10 @@ SoCs: compatible = "renesas,r8a73a4" - R-Mobile A1 (R8A77400) compatible = "renesas,r8a7740" + - RZ/G1M (R8A77430) + compatible = "renesas,r8a7743" + - RZ/G1E (R8A77450) + compatible = "renesas,r8a7745" - R-Car M1A (R8A77781) compatible = "renesas,r8a7778" - R-Car H1 (R8A77790) @@ -35,7 +39,7 @@ SoCs: Boards: - - Alt + - Alt (RTP0RC7794SEB00010S) compatible = "renesas,alt", "renesas,r8a7794" - APE6-EVM compatible = "renesas,ape6evm", "renesas,r8a73a4" @@ -47,9 +51,9 @@ Boards: compatible = "renesas,bockw", "renesas,r8a7778" - Genmai (RTK772100BC00000BR) compatible = "renesas,genmai", "renesas,r7s72100" - - Gose + - Gose (RTP0RC7793SEB00010S) compatible = "renesas,gose", "renesas,r8a7793" - - H3ULCB (RTP0RC7795SKB00010S) + - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKB00010S) compatible = "renesas,h3ulcb", "renesas,r8a7795"; - Henninger compatible = "renesas,henninger", "renesas,r8a7791" @@ -61,7 +65,9 @@ Boards: compatible = "renesas,kzm9g", "renesas,sh73a0" - Lager (RTP0RC7790SEB00010S) compatible = "renesas,lager", "renesas,r8a7790" - - Marzen + - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKB00010S) + compatible = "renesas,m3ulcb", "renesas,r8a7796"; + - Marzen (R0P7779A00010S) compatible = "renesas,marzen", "renesas,r8a7779" - Porter (M2-LCDP) compatible = "renesas,porter", "renesas,r8a7791" @@ -73,5 +79,27 @@ Boards: compatible = "renesas,salvator-x", "renesas,r8a7796"; - SILK (RTP0RC7794LCB00011S) compatible = "renesas,silk", "renesas,r8a7794" + - SK-RZG1E (YR8A77450S000BE) + compatible = "renesas,sk-rzg1e", "renesas,r8a7745" + - SK-RZG1M (YR8A77430S000BE) + compatible = "renesas,sk-rzg1m", "renesas,r8a7743" - Wheat compatible = "renesas,wheat", "renesas,r8a7792" + + +Most Renesas ARM SoCs have a Product Register that allows to retrieve SoC +product and revision information. If present, a device node for this register +should be added. + +Required properties: + - compatible: Must be "renesas,prr". + - reg: Base address and length of the register block. + + +Examples +-------- + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; diff --git a/dts/Bindings/arm/sunxi.txt b/dts/Bindings/arm/sunxi.txt index 3975d0a0e4..4d6467cc2a 100644 --- a/dts/Bindings/arm/sunxi.txt +++ b/dts/Bindings/arm/sunxi.txt @@ -14,4 +14,5 @@ using one of the following compatible strings: allwinner,sun8i-a83t allwinner,sun8i-h3 allwinner,sun9i-a80 + allwinner,sun50i-a64 nextthing,gr8 diff --git a/dts/Bindings/arm/swir.txt b/dts/Bindings/arm/swir.txt new file mode 100644 index 0000000000..042be73a95 --- /dev/null +++ b/dts/Bindings/arm/swir.txt @@ -0,0 +1,12 @@ +Sierra Wireless Modules device tree bindings +-------------------------------------------- + +Supported Modules : + - WP8548 : Includes MDM9615 and PM8018 in a module + +Sierra Wireless modules shall have the following properties : + Required root node property + - compatible: "swir,wp8548" for the WP8548 CF3 Module + +Board compatible values: + - "swir,mangoh-green-wp8548" for the mangOH green board with the WP8548 module diff --git a/dts/Bindings/ata/ahci-fsl-qoriq.txt b/dts/Bindings/ata/ahci-fsl-qoriq.txt index 032a7606b8..fc33ca01e9 100644 --- a/dts/Bindings/ata/ahci-fsl-qoriq.txt +++ b/dts/Bindings/ata/ahci-fsl-qoriq.txt @@ -3,7 +3,7 @@ Binding for Freescale QorIQ AHCI SATA Controller Required properties: - reg: Physical base address and size of the controller's register area. - compatible: Compatibility string. Must be 'fsl,<chip>-ahci', where - chip could be ls1021a, ls2080a, ls1043a etc. + chip could be ls1021a, ls1043a, ls1046a, ls2080a etc. - clocks: Input clock specifier. Refer to common clock bindings. - interrupts: Interrupt specifier. Refer to interrupt binding. diff --git a/dts/Bindings/ata/ahci-st.txt b/dts/Bindings/ata/ahci-st.txt index e1d01df8e3..909c993536 100644 --- a/dts/Bindings/ata/ahci-st.txt +++ b/dts/Bindings/ata/ahci-st.txt @@ -18,21 +18,6 @@ Optional properties: Example: - /* Example for stih416 */ - sata0: sata@fe380000 { - compatible = "st,ahci"; - reg = <0xfe380000 0x1000>; - interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; - interrupt-names = "hostc"; - phys = <&phy_port0 PHY_TYPE_SATA>; - phy-names = "ahci_phy"; - resets = <&powerdown STIH416_SATA0_POWERDOWN>, - <&softreset STIH416_SATA0_SOFTRESET>; - reset-names = "pwr-dwn", "sw-rst"; - clocks = <&clk_s_a0_ls CLK_ICN_REG>; - clock-names = "ahci_clk"; - }; - /* Example for stih407 family silicon */ sata0: sata@9b20000 { compatible = "st,ahci"; diff --git a/dts/Bindings/bus/nvidia,tegra20-gmi.txt b/dts/Bindings/bus/nvidia,tegra20-gmi.txt new file mode 100644 index 0000000000..83b0e54f72 --- /dev/null +++ b/dts/Bindings/bus/nvidia,tegra20-gmi.txt @@ -0,0 +1,132 @@ +Device tree bindings for NVIDIA Tegra Generic Memory Interface bus + +The Generic Memory Interface bus enables memory transfers between internal and +external memory. Can be used to attach various high speed devices such as +synchronous/asynchronous NOR, FPGA, UARTS and more. + +The actual devices are instantiated from the child nodes of a GMI node. + +Required properties: + - compatible : Should contain one of the following: + For Tegra20 must contain "nvidia,tegra20-gmi". + For Tegra30 must contain "nvidia,tegra30-gmi". + - reg: Should contain GMI controller registers location and length. + - clocks: Must contain an entry for each entry in clock-names. + - clock-names: Must include the following entries: "gmi" + - resets : Must contain an entry for each entry in reset-names. + - reset-names : Must include the following entries: "gmi" + - #address-cells: The number of cells used to represent physical base + addresses in the GMI address space. Should be 2. + - #size-cells: The number of cells used to represent the size of an address + range in the GMI address space. Should be 1. + - ranges: Must be set up to reflect the memory layout with three integer values + for each chip-select line in use (only one entry is supported, see below + comments): + <cs-number> <offset> <physical address of mapping> <size> + +Note that the GMI controller does not have any internal chip-select address +decoding, because of that chip-selects either need to be managed via software +or by employing external chip-select decoding logic. + +If external chip-select logic is used to support multiple devices it is assumed +that the devices use the same timing and so are probably the same type. It also +assumes that they can fit in the 256MB address range. In this case only one +child device is supported which represents the active chip-select line, see +examples for more insight. + +The chip-select number is decoded from the child nodes second address cell of +'ranges' property, if 'ranges' property is not present or empty chip-select will +then be decoded from the first cell of the 'reg' property. + +Optional child cs node properties: + + - nvidia,snor-data-width-32bit: Use 32bit data-bus, default is 16bit. + - nvidia,snor-mux-mode: Enable address/data MUX mode. + - nvidia,snor-rdy-active-before-data: Assert RDY signal one cycle before data. + If omitted it will be asserted with data. + - nvidia,snor-rdy-active-high: RDY signal is active high + - nvidia,snor-adv-active-high: ADV signal is active high + - nvidia,snor-oe-active-high: WE/OE signal is active high + - nvidia,snor-cs-active-high: CS signal is active high + + Note that there is some special handling for the timing values. + From Tegra TRM: + Programming 0 means 1 clock cycle: actual cycle = programmed cycle + 1 + + - nvidia,snor-muxed-width: Number of cycles MUX address/data asserted on the + bus. Valid values are 0-15, default is 1 + - nvidia,snor-hold-width: Number of cycles CE stays asserted after the + de-assertion of WR_N (in case of SLAVE/MASTER Request) or OE_N + (in case of MASTER Request). Valid values are 0-15, default is 1 + - nvidia,snor-adv-width: Number of cycles during which ADV stays asserted. + Valid values are 0-15, default is 1. + - nvidia,snor-ce-width: Number of cycles before CE is asserted. + Valid values are 0-15, default is 4 + - nvidia,snor-we-width: Number of cycles during which WE stays asserted. + Valid values are 0-15, default is 1 + - nvidia,snor-oe-width: Number of cycles during which OE stays asserted. + Valid values are 0-255, default is 1 + - nvidia,snor-wait-width: Number of cycles before READY is asserted. + Valid values are 0-255, default is 3 + +Example with two SJA1000 CAN controllers connected to the GMI bus. We wrap the +controllers with a simple-bus node since they are all connected to the same +chip-select (CS4), in this example external address decoding is provided: + +gmi@70090000 { + compatible = "nvidia,tegra20-gmi"; + reg = <0x70009000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + clocks = <&tegra_car TEGRA20_CLK_NOR>; + clock-names = "gmi"; + resets = <&tegra_car 42>; + reset-names = "gmi"; + ranges = <4 0 0xd0000000 0xfffffff>; + + status = "okay"; + + bus@4,0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 4 0 0x40100>; + + nvidia,snor-mux-mode; + nvidia,snor-adv-active-high; + + can@0 { + reg = <0 0x100>; + ... + }; + + can@40000 { + reg = <0x40000 0x100>; + ... + }; + }; +}; + +Example with one SJA1000 CAN controller connected to the GMI bus +on CS4: + +gmi@70090000 { + compatible = "nvidia,tegra20-gmi"; + reg = <0x70009000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + clocks = <&tegra_car TEGRA20_CLK_NOR>; + clock-names = "gmi"; + resets = <&tegra_car 42>; + reset-names = "gmi"; + ranges = <4 0 0xd0000000 0xfffffff>; + + status = "okay"; + + can@4,0 { + reg = <4 0 0x100>; + nvidia,snor-mux-mode; + nvidia,snor-adv-active-high; + ... + }; +}; diff --git a/dts/Bindings/bus/ti,da850-mstpri.txt b/dts/Bindings/bus/ti,da850-mstpri.txt new file mode 100644 index 0000000000..72daefc6b4 --- /dev/null +++ b/dts/Bindings/bus/ti,da850-mstpri.txt @@ -0,0 +1,20 @@ +* Device tree bindings for Texas Instruments da8xx master peripheral + priority driver + +DA8XX SoCs feature a set of registers allowing to change the priority of all +peripherals classified as masters. + +Documentation: +OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf + +Required properties: + +- compatible: "ti,da850-mstpri" - for da850 based boards +- reg: offset and length of the mstpri registers + +Example for da850-lcdk is shown below. + +mstpri { + compatible = "ti,da850-mstpri"; + reg = <0x14110 0x0c>; +}; diff --git a/dts/Bindings/clock/exynos5433-clock.txt b/dts/Bindings/clock/exynos5433-clock.txt index 63379b04e0..1dc80f8811 100644 --- a/dts/Bindings/clock/exynos5433-clock.txt +++ b/dts/Bindings/clock/exynos5433-clock.txt @@ -79,7 +79,7 @@ Required Properties: Input clocks for fsys clock controller: - oscclk - sclk_ufs_mphy - - div_aclk_fsys_200 + - aclk_fsys_200 - sclk_pcie_100_fsys - sclk_ufsunipro_fsys - sclk_mmc2_fsys @@ -104,6 +104,10 @@ Required Properties: - sclk_decon_tv_vclk_disp - aclk_disp_333 + Input clocks for audio clock controller: + - oscclk + - fout_aud_pll + Input clocks for bus0 clock controller: - aclk_bus0_400 @@ -235,7 +239,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "sclk_ufs_mphy", - "div_aclk_fsys_200", + "aclk_fsys_200", "sclk_pcie_100_fsys", "sclk_ufsunipro_fsys", "sclk_mmc2_fsys", @@ -245,7 +249,7 @@ Example 2: Examples of clock controller nodes are listed below. "sclk_usbdrd30_fsys"; clocks = <&xxti>, <&cmu_cpif CLK_SCLK_UFS_MPHY>, - <&cmu_top CLK_DIV_ACLK_FSYS_200>, + <&cmu_top CLK_ACLK_FSYS_200>, <&cmu_top CLK_SCLK_PCIE_100_FSYS>, <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>, <&cmu_top CLK_SCLK_MMC2_FSYS>, @@ -297,6 +301,9 @@ Example 2: Examples of clock controller nodes are listed below. compatible = "samsung,exynos5433-cmu-aud"; reg = <0x114c0000 0x0b04>; #clock-cells = <1>; + + clock-names = "oscclk", "fout_aud_pll"; + clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; }; cmu_bus0: clock-controller@13600000 { diff --git a/dts/Bindings/clock/hi3519-crg.txt b/dts/Bindings/clock/hisi-crg.txt index acd1f235d5..cc60b3d423 100644 --- a/dts/Bindings/clock/hi3519-crg.txt +++ b/dts/Bindings/clock/hisi-crg.txt @@ -1,7 +1,7 @@ -* Hisilicon Hi3519 Clock and Reset Generator(CRG) +* HiSilicon Clock and Reset Generator(CRG) -The Hi3519 CRG module provides clock and reset signals to various -controllers within the SoC. +The CRG module provides clock and reset signals to various +modules within the SoC. This binding uses the following bindings: Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -10,7 +10,11 @@ This binding uses the following bindings: Required Properties: - compatible: should be one of the following. - - "hisilicon,hi3519-crg" - controller compatible with Hi3519 SoC. + - "hisilicon,hi3516cv300-crg" + - "hisilicon,hi3516cv300-sysctrl" + - "hisilicon,hi3519-crg" + - "hisilicon,hi3798cv200-crg" + - "hisilicon,hi3798cv200-sysctrl" - reg: physical base address of the controller and length of memory mapped region. diff --git a/dts/Bindings/clock/imx31-clock.txt b/dts/Bindings/clock/imx31-clock.txt index 19df842c69..8163d565f6 100644 --- a/dts/Bindings/clock/imx31-clock.txt +++ b/dts/Bindings/clock/imx31-clock.txt @@ -77,7 +77,7 @@ Examples: clks: ccm@53f80000{ compatible = "fsl,imx31-ccm"; reg = <0x53f80000 0x4000>; - interrupts = <0 31 0x04 0 53 0x04>; + interrupts = <31>, <53>; #clock-cells = <1>; }; diff --git a/dts/Bindings/clock/oxnas,stdclk.txt b/dts/Bindings/clock/oxnas,stdclk.txt index 208cca6ac4..b652f3fb77 100644 --- a/dts/Bindings/clock/oxnas,stdclk.txt +++ b/dts/Bindings/clock/oxnas,stdclk.txt @@ -5,22 +5,15 @@ Please also refer to clock-bindings.txt in this directory for common clock bindings usage. Required properties: -- compatible: Should be "oxsemi,ox810se-stdclk" +- compatible: For OX810SE, should be "oxsemi,ox810se-stdclk" + For OX820, should be "oxsemi,ox820-stdclk" - #clock-cells: 1, see below Parent node should have the following properties : -- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" - -For OX810SE, the clock indices are : - - 0: LEON - - 1: DMA_SGDMA - - 2: CIPHER - - 3: SATA - - 4: AUDIO - - 5: USBMPH - - 6: ETHA - - 7: PCIA - - 8: NAND +- compatible: For OX810SE, should be + "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" + For OX820, should be + "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd" example: diff --git a/dts/Bindings/clock/qcom,gcc.txt b/dts/Bindings/clock/qcom,gcc.txt index 3cf4421706..5b4dfc1ea5 100644 --- a/dts/Bindings/clock/qcom,gcc.txt +++ b/dts/Bindings/clock/qcom,gcc.txt @@ -14,6 +14,7 @@ Required properties : "qcom,gcc-msm8974" "qcom,gcc-msm8974pro" "qcom,gcc-msm8974pro-ac" + "qcom,gcc-msm8994" "qcom,gcc-msm8996" "qcom,gcc-mdm9615" diff --git a/dts/Bindings/clock/qcom,rpmcc.txt b/dts/Bindings/clock/qcom,rpmcc.txt new file mode 100644 index 0000000000..87d3714b95 --- /dev/null +++ b/dts/Bindings/clock/qcom,rpmcc.txt @@ -0,0 +1,37 @@ +Qualcomm RPM Clock Controller Binding +------------------------------------------------ +The RPM is a dedicated hardware engine for managing the shared +SoC resources in order to keep the lowest power profile. It +communicates with other hardware subsystems via shared memory +and accepts clock requests, aggregates the requests and turns +the clocks on/off or scales them on demand. + +Required properties : +- compatible : shall contain only one of the following. The generic + compatible "qcom,rpmcc" should be also included. + + "qcom,rpmcc-msm8916", "qcom,rpmcc" + "qcom,rpmcc-apq8064", "qcom,rpmcc" + +- #clock-cells : shall contain 1 + +Example: + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <0 168 1>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; + #clock-cells = <1>; + }; + }; + }; + }; diff --git a/dts/Bindings/clock/qoriq-clock.txt b/dts/Bindings/clock/qoriq-clock.txt index 16a3ec4331..df9cb5ac5f 100644 --- a/dts/Bindings/clock/qoriq-clock.txt +++ b/dts/Bindings/clock/qoriq-clock.txt @@ -32,6 +32,9 @@ Required properties: * "fsl,b4420-clockgen" * "fsl,b4860-clockgen" * "fsl,ls1021a-clockgen" + * "fsl,ls1043a-clockgen" + * "fsl,ls1046a-clockgen" + * "fsl,ls2080a-clockgen" Chassis-version clock strings include: * "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks * "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks diff --git a/dts/Bindings/clock/renesas,cpg-mssr.txt b/dts/Bindings/clock/renesas,cpg-mssr.txt index 394d725ac7..c469194129 100644 --- a/dts/Bindings/clock/renesas,cpg-mssr.txt +++ b/dts/Bindings/clock/renesas,cpg-mssr.txt @@ -13,6 +13,8 @@ They provide the following functionalities: Required Properties: - compatible: Must be one of: + - "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M) + - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E) - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3) - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W) @@ -22,8 +24,9 @@ Required Properties: - clocks: References to external parent clocks, one entry for each entry in clock-names - clock-names: List of external parent clock names. Valid names are: - - "extal" (r8a7795, r8a7796) + - "extal" (r8a7743, r8a7745, r8a7795, r8a7796) - "extalr" (r8a7795, r8a7796) + - "usb_extal" (r8a7743, r8a7745) - #clock-cells: Must be 2 - For CPG core clocks, the two clock specifier cells must be "CPG_CORE" diff --git a/dts/Bindings/clock/rockchip,rk1108-cru.txt b/dts/Bindings/clock/rockchip,rk1108-cru.txt new file mode 100644 index 0000000000..4da126116c --- /dev/null +++ b/dts/Bindings/clock/rockchip,rk1108-cru.txt @@ -0,0 +1,59 @@ +* Rockchip RK1108 Clock and Reset Unit + +The RK1108 clock controller generates and supplies clock to various +controllers within the SoC and also implements a reset controller for SoC +peripherals. + +Required Properties: + +- compatible: should be "rockchip,rk1108-cru" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Optional Properties: + +- rockchip,grf: phandle to the syscon managing the "general register files" + If missing pll rates are not changeable, due to the missing pll lock status. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/rk1108-cru.h headers and can be +used in device tree sources. Similar macros exist for the reset sources in +these files. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xin24m" - crystal input - required, + - "ext_vip" - external VIP clock - optional + - "ext_i2s" - external I2S clock - optional + - "ext_gmac" - external GMAC clock - optional + - "hdmiphy" - external clock input derived from HDMI PHY - optional + - "usbphy" - external clock input derived from USB PHY - optional + +Example: Clock controller node: + + cru: cru@20200000 { + compatible = "rockchip,rk1108-cru"; + reg = <0x20200000 0x1000>; + rockchip,grf = <&grf>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart0: serial@10230000 { + compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart"; + reg = <0x10230000 0x100>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&cru SCLK_UART0>; + }; diff --git a/dts/Bindings/clock/st,stm32-rcc.txt b/dts/Bindings/clock/st,stm32-rcc.txt index c209de6cfa..0532d815da 100644 --- a/dts/Bindings/clock/st,stm32-rcc.txt +++ b/dts/Bindings/clock/st,stm32-rcc.txt @@ -7,7 +7,9 @@ Please refer to clock-bindings.txt for common clock controller binding usage. Please also refer to reset.txt for common reset controller binding usage. Required properties: -- compatible: Should be "st,stm32f42xx-rcc" +- compatible: Should be: + "st,stm32f42xx-rcc" + "st,stm32f469-rcc" - reg: should be register base and length as documented in the datasheet - #reset-cells: 1, see below diff --git a/dts/Bindings/clock/sunxi-ccu.txt b/dts/Bindings/clock/sunxi-ccu.txt index 3868458a5f..74d44a4273 100644 --- a/dts/Bindings/clock/sunxi-ccu.txt +++ b/dts/Bindings/clock/sunxi-ccu.txt @@ -7,6 +7,7 @@ Required properties : - "allwinner,sun8i-a23-ccu" - "allwinner,sun8i-a33-ccu" - "allwinner,sun8i-h3-ccu" + - "allwinner,sun50i-a64-ccu" - reg: Must contain the registers base address and length - clocks: phandle to the oscillators feeding the CCU. Two are needed: diff --git a/dts/Bindings/cpufreq/brcm,stb-avs-cpu-freq.txt b/dts/Bindings/cpufreq/brcm,stb-avs-cpu-freq.txt new file mode 100644 index 0000000000..af2385795d --- /dev/null +++ b/dts/Bindings/cpufreq/brcm,stb-avs-cpu-freq.txt @@ -0,0 +1,78 @@ +Broadcom AVS mail box and interrupt register bindings +===================================================== + +A total of three DT nodes are required. One node (brcm,avs-cpu-data-mem) +references the mailbox register used to communicate with the AVS CPU[1]. The +second node (brcm,avs-cpu-l2-intr) is required to trigger an interrupt on +the AVS CPU. The interrupt tells the AVS CPU that it needs to process a +command sent to it by a driver. Interrupting the AVS CPU is mandatory for +commands to be processed. + +The interface also requires a reference to the AVS host interrupt controller, +so a driver can react to interrupts generated by the AVS CPU whenever a command +has been processed. See [2] for more information on the brcm,l2-intc node. + +[1] The AVS CPU is an independent co-processor that runs proprietary +firmware. On some SoCs, this firmware supports DFS and DVFS in addition to +Adaptive Voltage Scaling. + +[2] Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt + + +Node brcm,avs-cpu-data-mem +-------------------------- + +Required properties: +- compatible: must include: brcm,avs-cpu-data-mem and + should include: one of brcm,bcm7271-avs-cpu-data-mem or + brcm,bcm7268-avs-cpu-data-mem +- reg: Specifies base physical address and size of the registers. +- interrupts: The interrupt that the AVS CPU will use to interrupt the host + when a command completed. +- interrupt-parent: The interrupt controller the above interrupt is routed + through. +- interrupt-names: The name of the interrupt used to interrupt the host. + +Optional properties: +- None + +Node brcm,avs-cpu-l2-intr +------------------------- + +Required properties: +- compatible: must include: brcm,avs-cpu-l2-intr and + should include: one of brcm,bcm7271-avs-cpu-l2-intr or + brcm,bcm7268-avs-cpu-l2-intr +- reg: Specifies base physical address and size of the registers. + +Optional properties: +- None + + +Example +======= + + avs_host_l2_intc: interrupt-controller@f04d1200 { + #interrupt-cells = <1>; + compatible = "brcm,l2-intc"; + interrupt-parent = <&intc>; + reg = <0xf04d1200 0x48>; + interrupt-controller; + interrupts = <0x0 0x19 0x0>; + interrupt-names = "avs"; + }; + + avs-cpu-data-mem@f04c4000 { + compatible = "brcm,bcm7271-avs-cpu-data-mem", + "brcm,avs-cpu-data-mem"; + reg = <0xf04c4000 0x60>; + interrupts = <0x1a>; + interrupt-parent = <&avs_host_l2_intc>; + interrupt-names = "sw_intr"; + }; + + avs-cpu-l2-intr@f04d1100 { + compatible = "brcm,bcm7271-avs-cpu-l2-intr", + "brcm,avs-cpu-l2-intr"; + reg = <0xf04d1100 0x10>; + }; diff --git a/dts/Bindings/crypto/fsl-sec4.txt b/dts/Bindings/crypto/fsl-sec4.txt index adeca34c5a..10a425f451 100644 --- a/dts/Bindings/crypto/fsl-sec4.txt +++ b/dts/Bindings/crypto/fsl-sec4.txt @@ -123,6 +123,9 @@ PROPERTIES EXAMPLE + +iMX6QDL/SX requires four clocks + crypto@300000 { compatible = "fsl,sec-v4.0"; fsl,sec-era = <2>; @@ -139,6 +142,23 @@ EXAMPLE clock-names = "mem", "aclk", "ipg", "emi_slow"; }; + +iMX6UL does only require three clocks + + crypto: caam@2140000 { + compatible = "fsl,sec-v4.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2140000 0x3c000>; + ranges = <0 0x2140000 0x3c000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&clks IMX6UL_CLK_CAAM_MEM>, + <&clks IMX6UL_CLK_CAAM_ACLK>, + <&clks IMX6UL_CLK_CAAM_IPG>; + clock-names = "mem", "aclk", "ipg"; + }; + ===================================================================== Job Ring (JR) Node diff --git a/dts/Bindings/display/amlogic,meson-vpu.txt b/dts/Bindings/display/amlogic,meson-vpu.txt new file mode 100644 index 0000000000..00f74bad1e --- /dev/null +++ b/dts/Bindings/display/amlogic,meson-vpu.txt @@ -0,0 +1,112 @@ +Amlogic Meson Display Controller +================================ + +The Amlogic Meson Display controller is composed of several components +that are going to be documented below: + +DMC|---------------VPU (Video Processing Unit)----------------|------HHI------| + | vd1 _______ _____________ _________________ | | +D |-------| |----| | | | | HDMI PLL | +D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK | +R |-------| |----| Processing | | | | | + | osd2 | | | |---| Enci ----------|----|-----VDAC------| +R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----| +A | osd1 | | | Blenders | | Encl ----------|----|---------------| +M |-------|______|----|____________| |________________| | | +___|__________________________________________________________|_______________| + + +VIU: Video Input Unit +--------------------- + +The Video Input Unit is in charge of the pixel scanout from the DDR memory. +It fetches the frames addresses, stride and parameters from the "Canvas" memory. +This part is also in charge of the CSC (Colorspace Conversion). +It can handle 2 OSD Planes and 2 Video Planes. + +VPP: Video Post Processing +-------------------------- + +The Video Post Processing is in charge of the scaling and blending of the +various planes into a single pixel stream. +There is a special "pre-blending" used by the video planes with a dedicated +scaler and a "post-blending" to merge with the OSD Planes. +The OSD planes also have a dedicated scaler for one of the OSD. + +VENC: Video Encoders +-------------------- + +The VENC is composed of the multiple pixel encoders : + - ENCI : Interlace Video encoder for CVBS and Interlace HDMI + - ENCP : Progressive Video Encoder for HDMI + - ENCL : LCD LVDS Encoder +The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock +tree and provides the scanout clock to the VPP and VIU. +The ENCI is connected to a single VDAC for Composite Output. +The ENCI and ENCP are connected to an on-chip HDMI Transceiver. + +Device Tree Bindings: +--------------------- + +VPU: Video Processing Unit +-------------------------- + +Required properties: +- compatible: value should be different for each SoC family as : + - GXBB (S905) : "amlogic,meson-gxbb-vpu" + - GXL (S905X, S905D) : "amlogic,meson-gxl-vpu" + - GXM (S912) : "amlogic,meson-gxm-vpu" + followed by the common "amlogic,meson-gx-vpu" +- reg: base address and size of he following memory-mapped regions : + - vpu + - hhi + - dmc +- reg-names: should contain the names of the previous memory regions +- interrupts: should contain the VENC Vsync interrupt number + +Required nodes: + +The connections to the VPU output video ports are modeled using the OF graph +bindings specified in Documentation/devicetree/bindings/graph.txt. + +The following table lists for each supported model the port number +corresponding to each VPU output. + + Port 0 Port 1 +----------------------------------------- + S905 (GXBB) CVBS VDAC HDMI-TX + S905X (GXL) CVBS VDAC HDMI-TX + S905D (GXL) CVBS VDAC HDMI-TX + S912 (GXM) CVBS VDAC HDMI-TX + +Example: + +tv-connector { + compatible = "composite-video-connector"; + + port { + tv_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; +}; + +vpu: vpu@d0100000 { + compatible = "amlogic,meson-gxbb-vpu"; + reg = <0x0 0xd0100000 0x0 0x100000>, + <0x0 0xc883c000 0x0 0x1000>, + <0x0 0xc8838000 0x0 0x1000>; + reg-names = "vpu", "hhi", "dmc"; + interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + + /* CVBS VDAC output port */ + port@0 { + reg = <0>; + + cvbs_vdac_out: endpoint { + remote-endpoint = <&tv_connector_in>; + }; + }; +}; diff --git a/dts/Bindings/display/brcm,bcm-vc4.txt b/dts/Bindings/display/brcm,bcm-vc4.txt index a5ea451e67..e2768703ac 100644 --- a/dts/Bindings/display/brcm,bcm-vc4.txt +++ b/dts/Bindings/display/brcm,bcm-vc4.txt @@ -43,6 +43,13 @@ Required properties for DPI: - port: Port node with a single endpoint connecting to the panel device, as defined in [1] +Required properties for VEC: +- compatible: Should be "brcm,bcm2835-vec" +- reg: Physical base address and length of the registers +- clocks: The core clock the unit runs on +- interrupts: The interrupt number + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt + Required properties for V3D: - compatible: Should be "brcm,bcm2835-v3d" - reg: Physical base address and length of the V3D's registers @@ -92,6 +99,13 @@ dpi: dpi@7e208000 { }; }; +vec: vec@7e806000 { + compatible = "brcm,bcm2835-vec"; + reg = <0x7e806000 0x1000>; + clocks = <&clocks BCM2835_CLOCK_VEC>; + interrupts = <2 27>; +}; + v3d: v3d@7ec00000 { compatible = "brcm,bcm2835-v3d"; reg = <0x7ec00000 0x1000>; diff --git a/dts/Bindings/display/bridge/dumb-vga-dac.txt b/dts/Bindings/display/bridge/dumb-vga-dac.txt index 003bc246a2..164cbb15f0 100644 --- a/dts/Bindings/display/bridge/dumb-vga-dac.txt +++ b/dts/Bindings/display/bridge/dumb-vga-dac.txt @@ -16,6 +16,8 @@ graph bindings specified in Documentation/devicetree/bindings/graph.txt. - Video port 0 for RGB input - Video port 1 for VGA output +Optional properties: +- vdd-supply: Power supply for DAC Example ------- diff --git a/dts/Bindings/display/bridge/dw_hdmi.txt b/dts/Bindings/display/bridge/dw_hdmi.txt index dc1452f0d5..5e9a84d6e5 100644 --- a/dts/Bindings/display/bridge/dw_hdmi.txt +++ b/dts/Bindings/display/bridge/dw_hdmi.txt @@ -19,7 +19,9 @@ Required properties: Optional properties - reg-io-width: the width of the reg:1,4, default set to 1 if not present -- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing +- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing, + if the property is omitted, a functionally reduced I2C bus + controller on DW HDMI is probed - clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec" Example: diff --git a/dts/Bindings/display/ti/ti,tfp410.txt b/dts/Bindings/display/bridge/ti,tfp410.txt index 2cbe32a3d0..54d7e31525 100644 --- a/dts/Bindings/display/ti/ti,tfp410.txt +++ b/dts/Bindings/display/bridge/ti,tfp410.txt @@ -6,10 +6,15 @@ Required properties: Optional properties: - powerdown-gpios: power-down gpio +- reg: I2C address. If and only if present the device node + should be placed into the i2c controller node where the + tfp410 i2c is connected to. Required nodes: -- Video port 0 for DPI input -- Video port 1 for DVI output +- Video port 0 for DPI input [1]. +- Video port 1 for DVI output [1]. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt Example ------- diff --git a/dts/Bindings/display/ht16k33.txt b/dts/Bindings/display/ht16k33.txt new file mode 100644 index 0000000000..8e5b30b877 --- /dev/null +++ b/dts/Bindings/display/ht16k33.txt @@ -0,0 +1,42 @@ +Holtek ht16k33 RAM mapping 16*8 LED controller driver with keyscan +------------------------------------------------------------------------------- + +Required properties: +- compatible: "holtek,ht16k33" +- reg: I2C slave address of the chip. +- interrupt-parent: A phandle pointing to the interrupt controller + serving the interrupt for this chip. +- interrupts: Interrupt specification for the key pressed interrupt. +- refresh-rate-hz: Display update interval in HZ. +- debounce-delay-ms: Debouncing interval time in milliseconds. +- linux,keymap: The keymap for keys as described in the binding + document (devicetree/bindings/input/matrix-keymap.txt). + +Optional properties: +- linux,no-autorepeat: Disable keyrepeat. +- default-brightness-level: Initial brightness level [0-15] (default: 15). + +Example: + +&i2c1 { + ht16k33: ht16k33@70 { + compatible = "holtek,ht16k33"; + reg = <0x70>; + refresh-rate-hz = <20>; + debounce-delay-ms = <50>; + interrupt-parent = <&gpio4>; + interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>; + linux,keymap = < + MATRIX_KEY(2, 0, KEY_F6) + MATRIX_KEY(3, 0, KEY_F8) + MATRIX_KEY(4, 0, KEY_F10) + MATRIX_KEY(5, 0, KEY_F4) + MATRIX_KEY(6, 0, KEY_F2) + MATRIX_KEY(2, 1, KEY_F5) + MATRIX_KEY(3, 1, KEY_F7) + MATRIX_KEY(4, 1, KEY_F9) + MATRIX_KEY(5, 1, KEY_F3) + MATRIX_KEY(6, 1, KEY_F1) + >; + }; +}; diff --git a/dts/Bindings/display/mxsfb.txt b/dts/Bindings/display/mxsfb.txt index 96ec5179c8..472e1ea6c5 100644 --- a/dts/Bindings/display/mxsfb.txt +++ b/dts/Bindings/display/mxsfb.txt @@ -1,20 +1,57 @@ * Freescale MXS LCD Interface (LCDIF) +New bindings: +============= Required properties: -- compatible: Should be "fsl,<chip>-lcdif". Supported chips include - imx23 and imx28. -- reg: Address and length of the register set for lcdif -- interrupts: Should contain lcdif interrupts -- display : phandle to display node (see below for details) +- compatible: Should be "fsl,imx23-lcdif" for i.MX23. + Should be "fsl,imx28-lcdif" for i.MX28. + Should be "fsl,imx6sx-lcdif" for i.MX6SX. +- reg: Address and length of the register set for LCDIF +- interrupts: Should contain LCDIF interrupt +- clocks: A list of phandle + clock-specifier pairs, one for each + entry in 'clock-names'. +- clock-names: A list of clock names. For MXSFB it should contain: + - "pix" for the LCDIF block clock + - (MX6SX-only) "axi", "disp_axi" for the bus interface clock + +Required sub-nodes: + - port: The connection to an encoder chip. + +Example: + + lcdif1: display-controller@2220000 { + compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; + reg = <0x02220000 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pix", "axi", "disp_axi"; + + port { + parallel_out: endpoint { + remote-endpoint = <&panel_in_parallel>; + }; + }; + }; + +Deprecated bindings: +==================== +Required properties: +- compatible: Should be "fsl,imx23-lcdif" for i.MX23. + Should be "fsl,imx28-lcdif" for i.MX28. +- reg: Address and length of the register set for LCDIF +- interrupts: Should contain LCDIF interrupts +- display: phandle to display node (see below for details) * display node Required properties: -- bits-per-pixel : <16> for RGB565, <32> for RGB888/666. -- bus-width : number of data lines. Could be <8>, <16>, <18> or <24>. +- bits-per-pixel: <16> for RGB565, <32> for RGB888/666. +- bus-width: number of data lines. Could be <8>, <16>, <18> or <24>. Required sub-node: -- display-timings : Refer to binding doc display-timing.txt for details. +- display-timings: Refer to binding doc display-timing.txt for details. Examples: diff --git a/dts/Bindings/display/panel/auo,g133han01.txt b/dts/Bindings/display/panel/auo,g133han01.txt new file mode 100644 index 0000000000..3afc767478 --- /dev/null +++ b/dts/Bindings/display/panel/auo,g133han01.txt @@ -0,0 +1,7 @@ +AU Optronics Corporation 13.3" FHD (1920x1080) TFT LCD panel + +Required properties: +- compatible: should be "auo,g133han01" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/dts/Bindings/display/panel/auo,g185han01.txt b/dts/Bindings/display/panel/auo,g185han01.txt new file mode 100644 index 0000000000..ed657c2141 --- /dev/null +++ b/dts/Bindings/display/panel/auo,g185han01.txt @@ -0,0 +1,7 @@ +AU Optronics Corporation 18.5" FHD (1920x1080) TFT LCD panel + +Required properties: +- compatible: should be "auo,g185han01" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/dts/Bindings/display/panel/auo,t215hvn01.txt b/dts/Bindings/display/panel/auo,t215hvn01.txt new file mode 100644 index 0000000000..cbd9da3f03 --- /dev/null +++ b/dts/Bindings/display/panel/auo,t215hvn01.txt @@ -0,0 +1,7 @@ +AU Optronics Corporation 21.5" FHD (1920x1080) color TFT LCD panel + +Required properties: +- compatible: should be "auo,t215hvn01" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/dts/Bindings/display/panel/chunghwa,claa070wp03xg.txt b/dts/Bindings/display/panel/chunghwa,claa070wp03xg.txt new file mode 100644 index 0000000000..dd22685d2a --- /dev/null +++ b/dts/Bindings/display/panel/chunghwa,claa070wp03xg.txt @@ -0,0 +1,7 @@ +Chunghwa Picture Tubes Ltd. 7" WXGA TFT LCD panel + +Required properties: +- compatible: should be "chunghwa,claa070wp03xg" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/dts/Bindings/display/panel/display-timing.txt b/dts/Bindings/display/panel/display-timing.txt index e1d4a0b596..81a75893d1 100644 --- a/dts/Bindings/display/panel/display-timing.txt +++ b/dts/Bindings/display/panel/display-timing.txt @@ -32,6 +32,14 @@ optional properties: - active low = drive pixel data on falling edge/ sample data on rising edge - ignored = ignored + - syncclk-active: with + - active high = drive sync on rising edge/ + sample sync on falling edge of pixel + clock + - active low = drive sync on falling edge/ + sample sync on rising edge of pixel + clock + - omitted = same configuration as pixelclk-active - interlaced (bool): boolean to enable interlaced mode - doublescan (bool): boolean to enable doublescan mode - doubleclk (bool): boolean to enable doubleclock mode diff --git a/dts/Bindings/display/panel/nvd,9128.txt b/dts/Bindings/display/panel/nvd,9128.txt new file mode 100644 index 0000000000..17bcd017c6 --- /dev/null +++ b/dts/Bindings/display/panel/nvd,9128.txt @@ -0,0 +1,7 @@ +New Vision Display 7.0" 800 RGB x 480 TFT LCD panel + +Required properties: +- compatible: should be "nvd,9128" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/dts/Bindings/display/panel/sharp,lq150x1lg11.txt b/dts/Bindings/display/panel/sharp,lq150x1lg11.txt new file mode 100644 index 0000000000..0f57c31435 --- /dev/null +++ b/dts/Bindings/display/panel/sharp,lq150x1lg11.txt @@ -0,0 +1,36 @@ +Sharp 15" LQ150X1LG11 XGA TFT LCD panel + +Required properties: +- compatible: should be "sharp,lq150x1lg11" +- power-supply: regulator to provide the VCC supply voltage (3.3 volts) + +Optional properties: +- backlight: phandle of the backlight device +- rlud-gpios: a single GPIO for the RL/UD (rotate 180 degrees) pin. +- sellvds-gpios: a single GPIO for the SELLVDS pin. + +If rlud-gpios and/or sellvds-gpios are not specified, the RL/UD and/or SELLVDS +pins are assumed to be handled appropriately by the hardware. + +Example: + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 100000>; /* VBR */ + + brightness-levels = <0 20 40 60 80 100>; + default-brightness-level = <2>; + + power-supply = <&vdd_12v_reg>; /* VDD */ + enable-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; /* XSTABY */ + }; + + panel { + compatible = "sharp,lq150x1lg11"; + + power-supply = <&vcc_3v3_reg>; /* VCC */ + + backlight = <&backlight>; + rlud-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; /* RL/UD */ + sellvds-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; /* SELLVDS */ + }; diff --git a/dts/Bindings/display/renesas,du.txt b/dts/Bindings/display/renesas,du.txt index 0d30e42e40..1a02f099a0 100644 --- a/dts/Bindings/display/renesas,du.txt +++ b/dts/Bindings/display/renesas,du.txt @@ -6,9 +6,11 @@ Required Properties: - "renesas,du-r8a7779" for R8A7779 (R-Car H1) compatible DU - "renesas,du-r8a7790" for R8A7790 (R-Car H2) compatible DU - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU + - "renesas,du-r8a7792" for R8A7792 (R-Car V2H) compatible DU - "renesas,du-r8a7793" for R8A7793 (R-Car M2-N) compatible DU - "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU - "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU + - "renesas,du-r8a7796" for R8A7796 (R-Car M3-W) compatible DU - reg: A list of base address and length of each memory resource, one for each entry in the reg-names property. @@ -25,10 +27,10 @@ Required Properties: - clock-names: Name of the clocks. This property is model-dependent. - R8A7779 uses a single functional clock. The clock doesn't need to be named. - - R8A779[01345] use one functional clock per channel and one clock per LVDS - encoder (if available). The functional clocks must be named "du.x" with - "x" being the channel numerical index. The LVDS clocks must be named - "lvds.x" with "x" being the LVDS encoder numerical index. + - R8A779[0123456] use one functional clock per channel and one clock per + LVDS encoder (if available). The functional clocks must be named "du.x" + with "x" being the channel numerical index. The LVDS clocks must be + named "lvds.x" with "x" being the LVDS encoder numerical index. - In addition to the functional and encoder clocks, all DU versions also support externally supplied pixel clocks. Those clocks are optional. When supplied they must be named "dclkin.x" with "x" being the input @@ -47,9 +49,11 @@ corresponding to each DU output. R8A7779 (H1) DPAD 0 DPAD 1 - - R8A7790 (H2) DPAD LVDS 0 LVDS 1 - R8A7791 (M2-W) DPAD LVDS 0 - - + R8A7792 (V2H) DPAD 0 DPAD 1 - - R8A7793 (M2-N) DPAD LVDS 0 - - R8A7794 (E2) DPAD 0 DPAD 1 - - R8A7795 (H3) DPAD HDMI 0 HDMI 1 LVDS + R8A7796 (M3-W) DPAD HDMI LVDS - Example: R8A7790 (R-Car H2) DU diff --git a/dts/Bindings/display/sunxi/sun4i-drm.txt b/dts/Bindings/display/sunxi/sun4i-drm.txt index b95696d748..b82c004494 100644 --- a/dts/Bindings/display/sunxi/sun4i-drm.txt +++ b/dts/Bindings/display/sunxi/sun4i-drm.txt @@ -28,6 +28,8 @@ The TCON acts as a timing controller for RGB, LVDS and TV interfaces. Required properties: - compatible: value must be either: * allwinner,sun5i-a13-tcon + * allwinner,sun6i-a31-tcon + * allwinner,sun6i-a31s-tcon * allwinner,sun8i-a33-tcon - reg: base address and size of memory-mapped region - interrupts: interrupt associated to this IP @@ -50,7 +52,7 @@ Required properties: second the block connected to the TCON channel 1 (usually the TV encoder) -On the A13, there is one more clock required: +On SoCs other than the A33, there is one more clock required: - 'tcon-ch1': The clock driving the TCON channel 1 DRC @@ -64,6 +66,8 @@ adaptive backlight control. Required properties: - compatible: value must be one of: + * allwinner,sun6i-a31-drc + * allwinner,sun6i-a31s-drc * allwinner,sun8i-a33-drc - reg: base address and size of the memory-mapped region. - interrupts: interrupt associated to this IP @@ -87,6 +91,7 @@ system. Required properties: - compatible: value must be one of: * allwinner,sun5i-a13-display-backend + * allwinner,sun6i-a31-display-backend * allwinner,sun8i-a33-display-backend - reg: base address and size of the memory-mapped region. - clocks: phandles to the clocks feeding the frontend and backend @@ -117,6 +122,7 @@ deinterlacing and color space conversion. Required properties: - compatible: value must be one of: * allwinner,sun5i-a13-display-frontend + * allwinner,sun6i-a31-display-frontend * allwinner,sun8i-a33-display-frontend - reg: base address and size of the memory-mapped region. - interrupts: interrupt associated to this IP @@ -142,6 +148,8 @@ extra node. Required properties: - compatible: value must be one of: * allwinner,sun5i-a13-display-engine + * allwinner,sun6i-a31-display-engine + * allwinner,sun6i-a31s-display-engine * allwinner,sun8i-a33-display-engine - allwinner,pipelines: list of phandle to the display engine diff --git a/dts/Bindings/display/tilcdc/tilcdc.txt b/dts/Bindings/display/tilcdc/tilcdc.txt index a83abd79c5..6fddb4f4f7 100644 --- a/dts/Bindings/display/tilcdc/tilcdc.txt +++ b/dts/Bindings/display/tilcdc/tilcdc.txt @@ -1,7 +1,9 @@ Device-Tree bindings for tilcdc DRM driver Required properties: - - compatible: value should be "ti,am33xx-tilcdc". + - compatible: value should be one of the following: + - "ti,am33xx-tilcdc" for AM335x based boards + - "ti,da850-tilcdc" for DA850/AM18x/OMAP-L138 based boards - interrupts: the interrupt number - reg: base address and size of the LCDC device @@ -51,7 +53,7 @@ Optional nodes: Example: fb: fb@4830e000 { - compatible = "ti,am33xx-tilcdc"; + compatible = "ti,am33xx-tilcdc", "ti,da850-tilcdc"; reg = <0x4830e000 0x1000>; interrupt-parent = <&intc>; interrupts = <36>; diff --git a/dts/Bindings/display/zte,vou.txt b/dts/Bindings/display/zte,vou.txt new file mode 100644 index 0000000000..740e5bd2e4 --- /dev/null +++ b/dts/Bindings/display/zte,vou.txt @@ -0,0 +1,84 @@ +ZTE VOU Display Controller + +This is a display controller found on ZTE ZX296718 SoC. It includes multiple +Graphic Layer (GL) and Video Layer (VL), two Mixers/Channels, and a few blocks +handling scaling, color space conversion etc. VOU also integrates the support +for typical output devices, like HDMI, TV Encoder, VGA, and RGB LCD. + +* Master VOU node + +It must be the parent node of all the sub-device nodes. + +Required properties: + - compatible: should be "zte,zx296718-vou" + - #address-cells: should be <1> + - #size-cells: should be <1> + - ranges: list of address translations between VOU and sub-devices + +* VOU DPC device + +Required properties: + - compatible: should be "zte,zx296718-dpc" + - reg: Physical base address and length of DPC register regions, one for each + entry in 'reg-names' + - reg-names: The names of register regions. The following regions are required: + "osd" + "timing_ctrl" + "dtrc" + "vou_ctrl" + "otfppu" + - interrupts: VOU DPC interrupt number to CPU + - clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' + - clock-names: A list of clock names. The following clocks are required: + "aclk" + "ppu_wclk" + "main_wclk" + "aux_wclk" + +* HDMI output device + +Required properties: + - compatible: should be "zte,zx296718-hdmi" + - reg: Physical base address and length of the HDMI device IO region + - interrupts : HDMI interrupt number to CPU + - clocks: A list of phandle + clock-specifier pairs, one for each entry + in 'clock-names' + - clock-names: A list of clock names. The following clocks are required: + "osc_cec" + "osc_clk" + "xclk" + +Example: + +vou: vou@1440000 { + compatible = "zte,zx296718-vou"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1440000 0x10000>; + + dpc: dpc@0 { + compatible = "zte,zx296718-dpc"; + reg = <0x0000 0x1000>, <0x1000 0x1000>, + <0x5000 0x1000>, <0x6000 0x1000>, + <0xa000 0x1000>; + reg-names = "osd", "timing_ctrl", + "dtrc", "vou_ctrl", + "otfppu"; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>, + <&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>; + clock-names = "aclk", "ppu_wclk", + "main_wclk", "aux_wclk"; + }; + + hdmi: hdmi@c000 { + compatible = "zte,zx296718-hdmi"; + reg = <0xc000 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>; + clocks = <&topcrm HDMI_OSC_CEC>, + <&topcrm HDMI_OSC_CLK>, + <&topcrm HDMI_XCLK>; + clock-names = "osc_cec", "osc_clk", "xclk"; + }; +}; diff --git a/dts/Bindings/dma/nbpfaxi.txt b/dts/Bindings/dma/nbpfaxi.txt index d5e2522b9e..d2e1e62e34 100644 --- a/dts/Bindings/dma/nbpfaxi.txt +++ b/dts/Bindings/dma/nbpfaxi.txt @@ -23,6 +23,14 @@ Required properties #define NBPF_SLAVE_RQ_LEVEL 4 Optional properties: +- max-burst-mem-read: limit burst size for memory reads + (DMA_MEM_TO_MEM/DMA_MEM_TO_DEV) to this value, specified in bytes, rather + than using the maximum burst size allowed by the hardware's buffer size. +- max-burst-mem-write: limit burst size for memory writes + (DMA_DEV_TO_MEM/DMA_MEM_TO_MEM) to this value, specified in bytes, rather + than using the maximum burst size allowed by the hardware's buffer size. + If both max-burst-mem-read and max-burst-mem-write are set, DMA_MEM_TO_MEM + will use the lower value. You can use dma-channels and dma-requests as described in dma.txt, although they won't be used, this information is derived from the compatibility string. diff --git a/dts/Bindings/dma/qcom_hidma_mgmt.txt b/dts/Bindings/dma/qcom_hidma_mgmt.txt index fd5618bd8f..55492c264d 100644 --- a/dts/Bindings/dma/qcom_hidma_mgmt.txt +++ b/dts/Bindings/dma/qcom_hidma_mgmt.txt @@ -5,13 +5,13 @@ memcpy and memset capabilities. It has been designed for virtualized environments. Each HIDMA HW instance consists of multiple DMA channels. These channels -share the same bandwidth. The bandwidth utilization can be parititioned +share the same bandwidth. The bandwidth utilization can be partitioned among channels based on the priority and weight assignments. There are only two priority levels and 15 weigh assignments possible. Other parameters here determine how much of the system bus this HIDMA -instance can use like maximum read/write request and and number of bytes to +instance can use like maximum read/write request and number of bytes to read/write in a single burst. Main node required properties: @@ -47,12 +47,18 @@ When the OS is not in control of the management interface (i.e. it's a guest), the channel nodes appear on their own, not under a management node. Required properties: -- compatible: must contain "qcom,hidma-1.0" +- compatible: must contain "qcom,hidma-1.0" for initial HW or "qcom,hidma-1.1" +for MSI capable HW. - reg: Addresses for the transfer and event channel - interrupts: Should contain the event interrupt - desc-count: Number of asynchronous requests this channel can handle - iommus: required a iommu node +Optional properties for MSI: +- msi-parent : See the generic MSI binding described in + devicetree/bindings/interrupt-controller/msi.txt for a description of the + msi-parent property. + Example: Hypervisor OS configuration: diff --git a/dts/Bindings/dma/renesas,rcar-dmac.txt b/dts/Bindings/dma/renesas,rcar-dmac.txt index 5f2ce66978..3316a9c2e6 100644 --- a/dts/Bindings/dma/renesas,rcar-dmac.txt +++ b/dts/Bindings/dma/renesas,rcar-dmac.txt @@ -24,6 +24,7 @@ Required Properties: - "renesas,dmac-r8a7793" (R-Car M2-N) - "renesas,dmac-r8a7794" (R-Car E2) - "renesas,dmac-r8a7795" (R-Car H3) + - "renesas,dmac-r8a7796" (R-Car M3-W) - reg: base address and length of the registers block for the DMAC diff --git a/dts/Bindings/dma/snps-dma.txt b/dts/Bindings/dma/snps-dma.txt index 0f5583293c..4775c66f45 100644 --- a/dts/Bindings/dma/snps-dma.txt +++ b/dts/Bindings/dma/snps-dma.txt @@ -27,6 +27,8 @@ Optional properties: that services interrupts for this device - is_private: The device channels should be marked as private and not for by the general purpose DMA channel allocator. False if not passed. +- multi-block: Multi block transfers supported by hardware. Array property with + one cell per channel. 0: not supported, 1 (default): supported. Example: diff --git a/dts/Bindings/dma/st_fdma.txt b/dts/Bindings/dma/st_fdma.txt new file mode 100644 index 0000000000..495d853c56 --- /dev/null +++ b/dts/Bindings/dma/st_fdma.txt @@ -0,0 +1,87 @@ +* STMicroelectronics Flexible Direct Memory Access Device Tree bindings + +The FDMA is a general-purpose direct memory access controller capable of +supporting 16 independent DMA channels. It accepts up to 32 DMA requests. +The FDMA is based on a Slim processor which requires a firmware. + +* FDMA Controller + +Required properties: +- compatible : Should be one of + - st,stih407-fdma-mpe31-11, "st,slim-rproc"; + - st,stih407-fdma-mpe31-12, "st,slim-rproc"; + - st,stih407-fdma-mpe31-13, "st,slim-rproc"; +- reg : Should contain an entry for each name in reg-names +- reg-names : Must contain "slimcore", "dmem", "peripherals", "imem" entries +- interrupts : Should contain one interrupt shared by all channels +- dma-channels : Number of channels supported by the controller +- #dma-cells : Must be <3>. See DMA client section below +- clocks : Must contain an entry for each clock +See: Documentation/devicetree/bindings/clock/clock-bindings.txt + + +Example: + + fdma0: dma-controller@8e20000 { + compatible = "st,stih407-fdma-mpe31-11", "st,slim-rproc"; + reg = <0x8e20000 0x8000>, + <0x8e30000 0x3000>, + <0x8e37000 0x1000>, + <0x8e38000 0x8000>; + reg-names = "slimcore", "dmem", "peripherals", "imem"; + clocks = <&clk_s_c0_flexgen CLK_FDMA>, + <&clk_s_c0_flexgen CLK_EXT2F_A9>, + <&clk_s_c0_flexgen CLK_EXT2F_A9>, + <&clk_s_c0_flexgen CLK_EXT2F_A9>; + interrupts = <GIC_SPI 5 IRQ_TYPE_NONE>; + dma-channels = <16>; + #dma-cells = <3>; + }; + +* DMA client + +Required properties: +- dmas: Comma separated list of dma channel requests +- dma-names: Names of the aforementioned requested channels + +Each dmas request consists of 4 cells: +1. A phandle pointing to the FDMA controller +2. The request line number +3. A 32bit mask specifying (see include/linux/platform_data/dma-st-fdma.h) + -bit 2-0: Holdoff value, dreq will be masked for + 0x0: 0-0.5us + 0x1: 0.5-1us + 0x2: 1-1.5us + -bit 17: data swap + 0x0: disabled + 0x1: enabled + -bit 21: Increment Address + 0x0: no address increment between transfers + 0x1: increment address between transfers + -bit 22: 2 STBus Initiator Coprocessor interface + 0x0: high priority port + 0x1: low priority port +4. transfers type + 0 free running + 1 paced + +Example: + + sti_uni_player2: sti-uni-player@2 { + compatible = "st,sti-uni-player"; + status = "disabled"; + #sound-dai-cells = <0>; + st,syscfg = <&syscfg_core>; + clocks = <&clk_s_d0_flexgen CLK_PCM_2>; + assigned-clocks = <&clk_s_d0_flexgen CLK_PCM_2>; + assigned-clock-parents = <&clk_s_d0_quadfs 2>; + assigned-clock-rates = <50000000>; + reg = <0x8D82000 0x158>; + interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>; + dmas = <&fdma0 4 0 1>; + dai-name = "Uni Player #1 (DAC)"; + dma-names = "tx"; + st,uniperiph-id = <2>; + st,version = <5>; + st,mode = "PCM"; + }; diff --git a/dts/Bindings/extcon/extcon-usb-gpio.txt b/dts/Bindings/extcon/extcon-usb-gpio.txt index af0b903de2..dfc14f71e8 100644 --- a/dts/Bindings/extcon/extcon-usb-gpio.txt +++ b/dts/Bindings/extcon/extcon-usb-gpio.txt @@ -5,7 +5,10 @@ connected to a GPIO pin. Required properties: - compatible: Should be "linux,extcon-usb-gpio" + +Either one of id-gpio or vbus-gpio must be present. Both can be present as well. - id-gpio: gpio for USB ID pin. See gpio binding. +- vbus-gpio: gpio for USB VBUS pin. Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below: extcon_usb1 { diff --git a/dts/Bindings/firmware/nvidia,tegra186-bpmp.txt b/dts/Bindings/firmware/nvidia,tegra186-bpmp.txt new file mode 100644 index 0000000000..e821e16ad6 --- /dev/null +++ b/dts/Bindings/firmware/nvidia,tegra186-bpmp.txt @@ -0,0 +1,108 @@ +NVIDIA Tegra Boot and Power Management Processor (BPMP) + +The BPMP is a specific processor in Tegra chip, which is designed for +booting process handling and offloading the power management, clock +management, and reset control tasks from the CPU. The binding document +defines the resources that would be used by the BPMP firmware driver, +which can create the interprocessor communication (IPC) between the CPU +and BPMP. + +Required properties: +- name : Should be bpmp +- compatible + Array of strings + One of: + - "nvidia,tegra186-bpmp" +- mboxes : The phandle of mailbox controller and the mailbox specifier. +- shmem : List of the phandle of the TX and RX shared memory area that + the IPC between CPU and BPMP is based on. +- #clock-cells : Should be 1. +- #power-domain-cells : Should be 1. +- #reset-cells : Should be 1. + +This node is a mailbox consumer. See the following files for details of +the mailbox subsystem, and the specifiers implemented by the relevant +provider(s): + +- .../mailbox/mailbox.txt +- .../mailbox/nvidia,tegra186-hsp.txt + +This node is a clock, power domain, and reset provider. See the following +files for general documentation of those features, and the specifiers +implemented by this node: + +- .../clock/clock-bindings.txt +- <dt-bindings/clock/tegra186-clock.h> +- ../power/power_domain.txt +- <dt-bindings/power/tegra186-powergate.h> +- .../reset/reset.txt +- <dt-bindings/reset/tegra186-reset.h> + +The BPMP implements some services which must be represented by separate nodes. +For example, it can provide access to certain I2C controllers, and the I2C +bindings represent each I2C controller as a device tree node. Such nodes should +be nested directly inside the main BPMP node. + +Software can determine whether a child node of the BPMP node represents a device +by checking for a compatible property. Any node with a compatible property +represents a device that can be instantiated. Nodes without a compatible +property may be used to provide configuration information regarding the BPMP +itself, although no such configuration nodes are currently defined by this +binding. + +The BPMP firmware defines no single global name-/numbering-space for such +services. Put another way, the numbering scheme for I2C buses is distinct from +the numbering scheme for any other service the BPMP may provide (e.g. a future +hypothetical SPI bus service). As such, child device nodes will have no reg +property, and the BPMP node will have no #address-cells or #size-cells property. + +The shared memory bindings for BPMP +----------------------------------- + +The shared memory area for the IPC TX and RX between CPU and BPMP are +predefined and work on top of sysram, which is an SRAM inside the chip. + +See ".../sram/sram.txt" for the bindings. + +Example: + +hsp_top0: hsp@03c00000 { + ... + #mbox-cells = <2>; +}; + +sysram@30000000 { + compatible = "nvidia,tegra186-sysram", "mmio-sram"; + reg = <0x0 0x30000000 0x0 0x50000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>; + + cpu_bpmp_tx: shmem@4e000 { + compatible = "nvidia,tegra186-bpmp-shmem"; + reg = <0x0 0x4e000 0x0 0x1000>; + label = "cpu-bpmp-tx"; + pool; + }; + + cpu_bpmp_rx: shmem@4f000 { + compatible = "nvidia,tegra186-bpmp-shmem"; + reg = <0x0 0x4f000 0x0 0x1000>; + label = "cpu-bpmp-rx"; + pool; + }; +}; + +bpmp { + compatible = "nvidia,tegra186-bpmp"; + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_BPMP>; + shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; + #clock-cells = <1>; + #power-domain-cells = <1>; + #reset-cells = <1>; + + i2c { + compatible = "..."; + ... + }; +}; diff --git a/dts/Bindings/firmware/qcom,scm.txt b/dts/Bindings/firmware/qcom,scm.txt index 3b4436e568..20f26fbce8 100644 --- a/dts/Bindings/firmware/qcom,scm.txt +++ b/dts/Bindings/firmware/qcom,scm.txt @@ -10,8 +10,10 @@ Required properties: * "qcom,scm-apq8064" for APQ8064 platforms * "qcom,scm-msm8660" for MSM8660 platforms * "qcom,scm-msm8690" for MSM8690 platforms + * "qcom,scm-msm8996" for MSM8996 platforms * "qcom,scm" for later processors (MSM8916, APQ8084, MSM8974, etc) - clocks: One to three clocks may be required based on compatible. + * No clock required for "qcom,scm-msm8996" * Only core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660", and "qcom,scm-msm8960" * Core, iface, and bus clocks required for "qcom,scm" - clock-names: Must contain "core" for the core clock, "iface" for the interface diff --git a/dts/Bindings/fpga/altera-fpga2sdram-bridge.txt b/dts/Bindings/fpga/altera-fpga2sdram-bridge.txt new file mode 100644 index 0000000000..817a8d4bf9 --- /dev/null +++ b/dts/Bindings/fpga/altera-fpga2sdram-bridge.txt @@ -0,0 +1,16 @@ +Altera FPGA To SDRAM Bridge Driver + +Required properties: +- compatible : Should contain "altr,socfpga-fpga2sdram-bridge" + +Optional properties: +- bridge-enable : 0 if driver should disable bridge at startup + 1 if driver should enable bridge at startup + Default is to leave bridge in current state. + +Example: + fpga_bridge3: fpga-bridge@ffc25080 { + compatible = "altr,socfpga-fpga2sdram-bridge"; + reg = <0xffc25080 0x4>; + bridge-enable = <0>; + }; diff --git a/dts/Bindings/fpga/altera-freeze-bridge.txt b/dts/Bindings/fpga/altera-freeze-bridge.txt new file mode 100644 index 0000000000..f8e288c71b --- /dev/null +++ b/dts/Bindings/fpga/altera-freeze-bridge.txt @@ -0,0 +1,23 @@ +Altera Freeze Bridge Controller Driver + +The Altera Freeze Bridge Controller manages one or more freeze bridges. +The controller can freeze/disable the bridges which prevents signal +changes from passing through the bridge. The controller can also +unfreeze/enable the bridges which allows traffic to pass through the +bridge normally. + +Required properties: +- compatible : Should contain "altr,freeze-bridge-controller" +- regs : base address and size for freeze bridge module + +Optional properties: +- bridge-enable : 0 if driver should disable bridge at startup + 1 if driver should enable bridge at startup + Default is to leave bridge in current state. + +Example: + freeze-controller@100000450 { + compatible = "altr,freeze-bridge-controller"; + regs = <0x1000 0x10>; + bridge-enable = <0>; + }; diff --git a/dts/Bindings/fpga/altera-hps2fpga-bridge.txt b/dts/Bindings/fpga/altera-hps2fpga-bridge.txt new file mode 100644 index 0000000000..6406f9337e --- /dev/null +++ b/dts/Bindings/fpga/altera-hps2fpga-bridge.txt @@ -0,0 +1,39 @@ +Altera FPGA/HPS Bridge Driver + +Required properties: +- regs : base address and size for AXI bridge module +- compatible : Should contain one of: + "altr,socfpga-lwhps2fpga-bridge", + "altr,socfpga-hps2fpga-bridge", or + "altr,socfpga-fpga2hps-bridge" +- resets : Phandle and reset specifier for this bridge's reset +- clocks : Clocks used by this module. + +Optional properties: +- bridge-enable : 0 if driver should disable bridge at startup. + 1 if driver should enable bridge at startup. + Default is to leave bridge in its current state. + +Example: + fpga_bridge0: fpga-bridge@ff400000 { + compatible = "altr,socfpga-lwhps2fpga-bridge"; + reg = <0xff400000 0x100000>; + resets = <&rst LWHPS2FPGA_RESET>; + clocks = <&l4_main_clk>; + bridge-enable = <0>; + }; + + fpga_bridge1: fpga-bridge@ff500000 { + compatible = "altr,socfpga-hps2fpga-bridge"; + reg = <0xff500000 0x10000>; + resets = <&rst HPS2FPGA_RESET>; + clocks = <&l4_main_clk>; + bridge-enable = <1>; + }; + + fpga_bridge2: fpga-bridge@ff600000 { + compatible = "altr,socfpga-fpga2hps-bridge"; + reg = <0xff600000 0x100000>; + resets = <&rst FPGA2HPS_RESET>; + clocks = <&l4_main_clk>; + }; diff --git a/dts/Bindings/fpga/altera-socfpga-a10-fpga-mgr.txt b/dts/Bindings/fpga/altera-socfpga-a10-fpga-mgr.txt new file mode 100644 index 0000000000..2fd8e7a847 --- /dev/null +++ b/dts/Bindings/fpga/altera-socfpga-a10-fpga-mgr.txt @@ -0,0 +1,19 @@ +Altera SOCFPGA Arria10 FPGA Manager + +Required properties: +- compatible : should contain "altr,socfpga-a10-fpga-mgr" +- reg : base address and size for memory mapped io. + - The first index is for FPGA manager register access. + - The second index is for writing FPGA configuration data. +- resets : Phandle and reset specifier for the device's reset. +- clocks : Clocks used by the device. + +Example: + + fpga_mgr: fpga-mgr@ffd03000 { + compatible = "altr,socfpga-a10-fpga-mgr"; + reg = <0xffd03000 0x100 + 0xffcfe400 0x20>; + clocks = <&l4_mp_clk>; + resets = <&rst FPGAMGR_RESET>; + }; diff --git a/dts/Bindings/fpga/fpga-region.txt b/dts/Bindings/fpga/fpga-region.txt new file mode 100644 index 0000000000..3b32ba15a7 --- /dev/null +++ b/dts/Bindings/fpga/fpga-region.txt @@ -0,0 +1,494 @@ +FPGA Region Device Tree Binding + +Alan Tull 2016 + + CONTENTS + - Introduction + - Terminology + - Sequence + - FPGA Region + - Supported Use Models + - Device Tree Examples + - Constraints + + +Introduction +============ + +FPGA Regions represent FPGA's and partial reconfiguration regions of FPGA's in +the Device Tree. FPGA Regions provide a way to program FPGAs under device tree +control. + +This device tree binding document hits some of the high points of FPGA usage and +attempts to include terminology used by both major FPGA manufacturers. This +document isn't a replacement for any manufacturers specifications for FPGA +usage. + + +Terminology +=========== + +Full Reconfiguration + * The entire FPGA is programmed. + +Partial Reconfiguration (PR) + * A section of an FPGA is reprogrammed while the rest of the FPGA is not + affected. + * Not all FPGA's support PR. + +Partial Reconfiguration Region (PRR) + * Also called a "reconfigurable partition" + * A PRR is a specific section of a FPGA reserved for reconfiguration. + * A base (or static) FPGA image may create a set of PRR's that later may + be independently reprogrammed many times. + * The size and specific location of each PRR is fixed. + * The connections at the edge of each PRR are fixed. The image that is loaded + into a PRR must fit and must use a subset of the region's connections. + * The busses within the FPGA are split such that each region gets its own + branch that may be gated independently. + +Persona + * Also called a "partial bit stream" + * An FPGA image that is designed to be loaded into a PRR. There may be + any number of personas designed to fit into a PRR, but only one at at time + may be loaded. + * A persona may create more regions. + +FPGA Bridge + * FPGA Bridges gate bus signals between a host and FPGA. + * FPGA Bridges should be disabled while the FPGA is being programmed to + prevent spurious signals on the cpu bus and to the soft logic. + * FPGA bridges may be actual hardware or soft logic on an FPGA. + * During Full Reconfiguration, hardware bridges between the host and FPGA + will be disabled. + * During Partial Reconfiguration of a specific region, that region's bridge + will be used to gate the busses. Traffic to other regions is not affected. + * In some implementations, the FPGA Manager transparantly handles gating the + buses, eliminating the need to show the hardware FPGA bridges in the + device tree. + * An FPGA image may create a set of reprogrammable regions, each having its + own bridge and its own split of the busses in the FPGA. + +FPGA Manager + * An FPGA Manager is a hardware block that programs an FPGA under the control + of a host processor. + +Base Image + * Also called the "static image" + * An FPGA image that is designed to do full reconfiguration of the FPGA. + * A base image may set up a set of partial reconfiguration regions that may + later be reprogrammed. + + ---------------- ---------------------------------- + | Host CPU | | FPGA | + | | | | + | ----| | ----------- -------- | + | | H | | |==>| Bridge0 |<==>| PRR0 | | + | | W | | | ----------- -------- | + | | | | | | + | | B |<=====>|<==| ----------- -------- | + | | R | | |==>| Bridge1 |<==>| PRR1 | | + | | I | | | ----------- -------- | + | | D | | | | + | | G | | | ----------- -------- | + | | E | | |==>| Bridge2 |<==>| PRR2 | | + | ----| | ----------- -------- | + | | | | + ---------------- ---------------------------------- + +Figure 1: An FPGA set up with a base image that created three regions. Each +region (PRR0-2) gets its own split of the busses that is independently gated by +a soft logic bridge (Bridge0-2) in the FPGA. The contents of each PRR can be +reprogrammed independently while the rest of the system continues to function. + + +Sequence +======== + +When a DT overlay that targets a FPGA Region is applied, the FPGA Region will +do the following: + + 1. Disable appropriate FPGA bridges. + 2. Program the FPGA using the FPGA manager. + 3. Enable the FPGA bridges. + 4. The Device Tree overlay is accepted into the live tree. + 5. Child devices are populated. + +When the overlay is removed, the child nodes will be removed and the FPGA Region +will disable the bridges. + + +FPGA Region +=========== + +FPGA Regions represent FPGA's and FPGA PR regions in the device tree. An FPGA +Region brings together the elements needed to program on a running system and +add the child devices: + + * FPGA Manager + * FPGA Bridges + * image-specific information needed to to the programming. + * child nodes + +The intended use is that a Device Tree overlay (DTO) can be used to reprogram an +FPGA while an operating system is running. + +An FPGA Region that exists in the live Device Tree reflects the current state. +If the live tree shows a "firmware-name" property or child nodes under a FPGA +Region, the FPGA already has been programmed. A DTO that targets a FPGA Region +and adds the "firmware-name" property is taken as a request to reprogram the +FPGA. After reprogramming is successful, the overlay is accepted into the live +tree. + +The base FPGA Region in the device tree represents the FPGA and supports full +reconfiguration. It must include a phandle to an FPGA Manager. The base +FPGA region will be the child of one of the hardware bridges (the bridge that +allows register access) between the cpu and the FPGA. If there are more than +one bridge to control during FPGA programming, the region will also contain a +list of phandles to the additional hardware FPGA Bridges. + +For partial reconfiguration (PR), each PR region will have an FPGA Region. +These FPGA regions are children of FPGA bridges which are then children of the +base FPGA region. The "Full Reconfiguration to add PRR's" example below shows +this. + +If an FPGA Region does not specify a FPGA Manager, it will inherit the FPGA +Manager specified by its ancestor FPGA Region. This supports both the case +where the same FPGA Manager is used for all of a FPGA as well the case where +a different FPGA Manager is used for each region. + +FPGA Regions do not inherit their ancestor FPGA regions' bridges. This prevents +shutting down bridges that are upstream from the other active regions while one +region is getting reconfigured (see Figure 1 above). During PR, the FPGA's +hardware bridges remain enabled. The PR regions' bridges will be FPGA bridges +within the static image of the FPGA. + +Required properties: +- compatible : should contain "fpga-region" +- fpga-mgr : should contain a phandle to an FPGA Manager. Child FPGA Regions + inherit this property from their ancestor regions. A fpga-mgr property + in a region will override any inherited FPGA manager. +- #address-cells, #size-cells, ranges : must be present to handle address space + mapping for child nodes. + +Optional properties: +- firmware-name : should contain the name of an FPGA image file located on the + firmware search path. If this property shows up in a live device tree + it indicates that the FPGA has already been programmed with this image. + If this property is in an overlay targeting a FPGA region, it is a + request to program the FPGA with that image. +- fpga-bridges : should contain a list of phandles to FPGA Bridges that must be + controlled during FPGA programming along with the parent FPGA bridge. + This property is optional if the FPGA Manager handles the bridges. + If the fpga-region is the child of a fpga-bridge, the list should not + contain the parent bridge. +- partial-fpga-config : boolean, set if partial reconfiguration is to be done, + otherwise full reconfiguration is done. +- external-fpga-config : boolean, set if the FPGA has already been configured + prior to OS boot up. +- region-unfreeze-timeout-us : The maximum time in microseconds to wait for + bridges to successfully become enabled after the region has been + programmed. +- region-freeze-timeout-us : The maximum time in microseconds to wait for + bridges to successfully become disabled before the region has been + programmed. +- child nodes : devices in the FPGA after programming. + +In the example below, when an overlay is applied targeting fpga-region0, +fpga_mgr is used to program the FPGA. Two bridges are controlled during +programming: the parent fpga_bridge0 and fpga_bridge1. Because the region is +the child of fpga_bridge0, only fpga_bridge1 needs to be specified in the +fpga-bridges property. During programming, these bridges are disabled, the +firmware specified in the overlay is loaded to the FPGA using the FPGA manager +specified in the region. If FPGA programming succeeds, the bridges are +reenabled and the overlay makes it into the live device tree. The child devices +are then populated. If FPGA programming fails, the bridges are left disabled +and the overlay is rejected. The overlay's ranges property maps the lwhps +bridge's region (0xff200000) and the hps bridge's region (0xc0000000) for use by +the two child devices. + +Example: +Base tree contains: + + fpga_mgr: fpga-mgr@ff706000 { + compatible = "altr,socfpga-fpga-mgr"; + reg = <0xff706000 0x1000 + 0xffb90000 0x20>; + interrupts = <0 175 4>; + }; + + fpga_bridge0: fpga-bridge@ff400000 { + compatible = "altr,socfpga-lwhps2fpga-bridge"; + reg = <0xff400000 0x100000>; + resets = <&rst LWHPS2FPGA_RESET>; + clocks = <&l4_main_clk>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + fpga_region0: fpga-region0 { + compatible = "fpga-region"; + fpga-mgr = <&fpga_mgr>; + }; + }; + + fpga_bridge1: fpga-bridge@ff500000 { + compatible = "altr,socfpga-hps2fpga-bridge"; + reg = <0xff500000 0x10000>; + resets = <&rst HPS2FPGA_RESET>; + clocks = <&l4_main_clk>; + }; + +Overlay contains: + +/dts-v1/ /plugin/; +/ { + fragment@0 { + target = <&fpga_region0>; + #address-cells = <1>; + #size-cells = <1>; + __overlay__ { + #address-cells = <1>; + #size-cells = <1>; + + firmware-name = "soc_system.rbf"; + fpga-bridges = <&fpga_bridge1>; + ranges = <0x20000 0xff200000 0x100000>, + <0x0 0xc0000000 0x20000000>; + + gpio@10040 { + compatible = "altr,pio-1.0"; + reg = <0x10040 0x20>; + altr,gpio-bank-width = <4>; + #gpio-cells = <2>; + clocks = <2>; + gpio-controller; + }; + + onchip-memory { + device_type = "memory"; + compatible = "altr,onchipmem-15.1"; + reg = <0x0 0x10000>; + }; + }; + }; +}; + + +Supported Use Models +==================== + +In all cases the live DT must have the FPGA Manager, FPGA Bridges (if any), and +a FPGA Region. The target of the Device Tree Overlay is the FPGA Region. Some +uses are specific to a FPGA device. + + * No FPGA Bridges + In this case, the FPGA Manager which programs the FPGA also handles the + bridges behind the scenes. No FPGA Bridge devices are needed for full + reconfiguration. + + * Full reconfiguration with hardware bridges + In this case, there are hardware bridges between the processor and FPGA that + need to be controlled during full reconfiguration. Before the overlay is + applied, the live DT must include the FPGA Manager, FPGA Bridges, and a + FPGA Region. The FPGA Region is the child of the bridge that allows + register access to the FPGA. Additional bridges may be listed in a + fpga-bridges property in the FPGA region or in the device tree overlay. + + * Partial reconfiguration with bridges in the FPGA + In this case, the FPGA will have one or more PRR's that may be programmed + separately while the rest of the FPGA can remain active. To manage this, + bridges need to exist in the FPGA that can gate the buses going to each FPGA + region while the buses are enabled for other sections. Before any partial + reconfiguration can be done, a base FPGA image must be loaded which includes + PRR's with FPGA bridges. The device tree should have a FPGA region for each + PRR. + +Device Tree Examples +==================== + +The intention of this section is to give some simple examples, focusing on +the placement of the elements detailed above, especially: + * FPGA Manager + * FPGA Bridges + * FPGA Region + * ranges + * target-path or target + +For the purposes of this section, I'm dividing the Device Tree into two parts, +each with its own requirements. The two parts are: + * The live DT prior to the overlay being added + * The DT overlay + +The live Device Tree must contain an FPGA Region, an FPGA Manager, and any FPGA +Bridges. The FPGA Region's "fpga-mgr" property specifies the manager by phandle +to handle programming the FPGA. If the FPGA Region is the child of another FPGA +Region, the parent's FPGA Manager is used. If FPGA Bridges need to be involved, +they are specified in the FPGA Region by the "fpga-bridges" property. During +FPGA programming, the FPGA Region will disable the bridges that are in its +"fpga-bridges" list and will re-enable them after FPGA programming has +succeeded. + +The Device Tree Overlay will contain: + * "target-path" or "target" + The insertion point where the the contents of the overlay will go into the + live tree. target-path is a full path, while target is a phandle. + * "ranges" + The address space mapping from processor to FPGA bus(ses). + * "firmware-name" + Specifies the name of the FPGA image file on the firmware search + path. The search path is described in the firmware class documentation. + * "partial-fpga-config" + This binding is a boolean and should be present if partial reconfiguration + is to be done. + * child nodes corresponding to hardware that will be loaded in this region of + the FPGA. + +Device Tree Example: Full Reconfiguration without Bridges +========================================================= + +Live Device Tree contains: + fpga_mgr0: fpga-mgr@f8007000 { + compatible = "xlnx,zynq-devcfg-1.0"; + reg = <0xf8007000 0x100>; + interrupt-parent = <&intc>; + interrupts = <0 8 4>; + clocks = <&clkc 12>; + clock-names = "ref_clk"; + syscon = <&slcr>; + }; + + fpga_region0: fpga-region0 { + compatible = "fpga-region"; + fpga-mgr = <&fpga_mgr0>; + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges; + }; + +DT Overlay contains: +/dts-v1/ /plugin/; +/ { +fragment@0 { + target = <&fpga_region0>; + #address-cells = <1>; + #size-cells = <1>; + __overlay__ { + #address-cells = <1>; + #size-cells = <1>; + + firmware-name = "zynq-gpio.bin"; + + gpio1: gpio@40000000 { + compatible = "xlnx,xps-gpio-1.00.a"; + reg = <0x40000000 0x10000>; + gpio-controller; + #gpio-cells = <0x2>; + xlnx,gpio-width= <0x6>; + }; + }; +}; + +Device Tree Example: Full Reconfiguration to add PRR's +====================================================== + +The base FPGA Region is specified similar to the first example above. + +This example programs the FPGA to have two regions that can later be partially +configured. Each region has its own bridge in the FPGA fabric. + +DT Overlay contains: +/dts-v1/ /plugin/; +/ { + fragment@0 { + target = <&fpga_region0>; + #address-cells = <1>; + #size-cells = <1>; + __overlay__ { + #address-cells = <1>; + #size-cells = <1>; + + firmware-name = "base.rbf"; + + fpga-bridge@4400 { + compatible = "altr,freeze-bridge"; + reg = <0x4400 0x10>; + + fpga_region1: fpga-region1 { + compatible = "fpga-region"; + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges; + }; + }; + + fpga-bridge@4420 { + compatible = "altr,freeze-bridge"; + reg = <0x4420 0x10>; + + fpga_region2: fpga-region2 { + compatible = "fpga-region"; + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges; + }; + }; + }; + }; +}; + +Device Tree Example: Partial Reconfiguration +============================================ + +This example reprograms one of the PRR's set up in the previous example. + +The sequence that occurs when this overlay is similar to the above, the only +differences are that the FPGA is partially reconfigured due to the +"partial-fpga-config" boolean and the only bridge that is controlled during +programming is the FPGA based bridge of fpga_region1. + +/dts-v1/ /plugin/; +/ { + fragment@0 { + target = <&fpga_region1>; + #address-cells = <1>; + #size-cells = <1>; + __overlay__ { + #address-cells = <1>; + #size-cells = <1>; + + firmware-name = "soc_image2.rbf"; + partial-fpga-config; + + gpio@10040 { + compatible = "altr,pio-1.0"; + reg = <0x10040 0x20>; + clocks = <0x2>; + altr,gpio-bank-width = <0x4>; + resetvalue = <0x0>; + #gpio-cells = <0x2>; + gpio-controller; + }; + }; + }; +}; + +Constraints +=========== + +It is beyond the scope of this document to fully describe all the FPGA design +constraints required to make partial reconfiguration work[1] [2] [3], but a few +deserve quick mention. + +A persona must have boundary connections that line up with those of the partion +or region it is designed to go into. + +During programming, transactions through those connections must be stopped and +the connections must be held at a fixed logic level. This can be achieved by +FPGA Bridges that exist on the FPGA fabric prior to the partial reconfiguration. + +-- +[1] www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/ug/ug_partrecon.pdf +[2] tspace.library.utoronto.ca/bitstream/1807/67932/1/Byma_Stuart_A_201411_MAS_thesis.pdf +[3] http://www.xilinx.com/support/documentation/sw_manuals/xilinx14_1/ug702.pdf diff --git a/dts/Bindings/gpio/gpio-sx150x.txt b/dts/Bindings/gpio/gpio-sx150x.txt deleted file mode 100644 index c809acb9c7..0000000000 --- a/dts/Bindings/gpio/gpio-sx150x.txt +++ /dev/null @@ -1,41 +0,0 @@ -SEMTECH SX150x GPIO expander bindings - - -Required properties: - -- compatible: should be "semtech,sx1506q", - "semtech,sx1508q", - "semtech,sx1509q", - "semtech,sx1502q". - -- reg: The I2C slave address for this device. - -- interrupt-parent: phandle of the parent interrupt controller. - -- interrupts: Interrupt specifier for the controllers interrupt. - -- #gpio-cells: Should be 2. The first cell is the GPIO number and the - second cell is used to specify optional parameters: - bit 0: polarity (0: normal, 1: inverted) - -- gpio-controller: Marks the device as a GPIO controller. - -- interrupt-controller: Marks the device as a interrupt controller. - -The GPIO expander can optionally be used as an interrupt controller, in -which case it uses the default two cell specifier as described in -Documentation/devicetree/bindings/interrupt-controller/interrupts.txt. - -Example: - - i2c_gpio_expander@20{ - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "semtech,sx1506q"; - reg = <0x20>; - interrupt-parent = <&gpio_1>; - interrupts = <16 0>; - - gpio-controller; - interrupt-controller; - }; diff --git a/dts/Bindings/gpio/gpio_oxnas.txt b/dts/Bindings/gpio/gpio_oxnas.txt index 928ed4f439..966514744d 100644 --- a/dts/Bindings/gpio/gpio_oxnas.txt +++ b/dts/Bindings/gpio/gpio_oxnas.txt @@ -3,7 +3,7 @@ Please refer to gpio.txt for generic information regarding GPIO bindings. Required properties: - - compatible: "oxsemi,ox810se-gpio" + - compatible: "oxsemi,ox810se-gpio" or "oxsemi,ox820-gpio" - reg: Base address and length for the device. - interrupts: The port interrupt shared by all pins. - gpio-controller: Marks the port as GPIO controller. diff --git a/dts/Bindings/gpio/mrvl-gpio.txt b/dts/Bindings/gpio/mrvl-gpio.txt index c3d016532d..30fd2201b3 100644 --- a/dts/Bindings/gpio/mrvl-gpio.txt +++ b/dts/Bindings/gpio/mrvl-gpio.txt @@ -17,7 +17,9 @@ Required properties: - #interrupt-cells: Specifies the number of cells needed to encode an interrupt source. - gpio-controller : Marks the device node as a gpio controller. -- #gpio-cells : Should be one. It is the pin number. +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify flags. See gpio.txt for possible + values. Example for a MMP platform: @@ -27,7 +29,7 @@ Example for a MMP platform: interrupts = <49>; interrupt-names = "gpio_mux"; gpio-controller; - #gpio-cells = <1>; + #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; }; diff --git a/dts/Bindings/hwmon/mcp3021.txt b/dts/Bindings/hwmon/mcp3021.txt new file mode 100644 index 0000000000..294318ba69 --- /dev/null +++ b/dts/Bindings/hwmon/mcp3021.txt @@ -0,0 +1,21 @@ +mcp3021 properties + +Required properties: +- compatible: Must be one of the following: + - "microchip,mcp3021" for mcp3021 + - "microchip,mcp3221" for mcp3221 +- reg: I2C address + +Optional properties: + +- reference-voltage-microvolt + Reference voltage in microvolt (uV) + +Example: + +mcp3021@4d { + compatible = "microchip,mcp3021"; + reg = <0x4d>; + + reference-voltage-microvolt = <4500000>; /* 4.5 V */ +}; diff --git a/dts/Bindings/hwmon/tmp108.txt b/dts/Bindings/hwmon/tmp108.txt new file mode 100644 index 0000000000..8c4b10df86 --- /dev/null +++ b/dts/Bindings/hwmon/tmp108.txt @@ -0,0 +1,14 @@ +TMP108 temperature sensor +------------------------- + +This device supports I2C only. + +Requires node properties: +- compatible : "ti,tmp108" +- reg : the I2C address of the device. This is 0x48, 0x49, 0x4a, or 0x4b. + +Example: + tmp108@48 { + compatible = "ti,tmp108"; + reg = <0x48>; + }; diff --git a/dts/Bindings/i2c/i2c-imx-lpi2c.txt b/dts/Bindings/i2c/i2c-imx-lpi2c.txt new file mode 100644 index 0000000000..70c054a9a9 --- /dev/null +++ b/dts/Bindings/i2c/i2c-imx-lpi2c.txt @@ -0,0 +1,20 @@ +* Freescale Low Power Inter IC (LPI2C) for i.MX + +Required properties: +- compatible : + - "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc + - "fsl,imx8dv-lpi2c" for LPI2C compatible with the one integrated on i.MX8DV soc +- reg : address and length of the lpi2c master registers +- interrupt-parent : core interrupt controller +- interrupts : lpi2c interrupt +- clocks : lpi2c clock specifier + +Examples: + +lpi2c7: lpi2c7@40A50000 { + compatible = "fsl,imx8dv-lpi2c"; + reg = <0x40A50000 0x10000>; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7ULP_CLK_LPI2C7>; +}; diff --git a/dts/Bindings/i2c/i2c-pxa.txt b/dts/Bindings/i2c/i2c-pxa.txt index 12b78ac507..d30f0b11d8 100644 --- a/dts/Bindings/i2c/i2c-pxa.txt +++ b/dts/Bindings/i2c/i2c-pxa.txt @@ -7,6 +7,7 @@ Required properties : compatible processor, e.g. pxa168, pxa910, mmp2, mmp3. For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required as shown in the example below. + For the Armada 3700, the compatible should be "marvell,armada-3700-i2c". Recommended properties : diff --git a/dts/Bindings/i2c/i2c-rcar.txt b/dts/Bindings/i2c/i2c-rcar.txt index 239632a0d7..2b8bd33dbf 100644 --- a/dts/Bindings/i2c/i2c-rcar.txt +++ b/dts/Bindings/i2c/i2c-rcar.txt @@ -1,17 +1,25 @@ I2C for R-Car platforms Required properties: -- compatible: Must be one of - "renesas,i2c-rcar" - "renesas,i2c-r8a7778" - "renesas,i2c-r8a7779" - "renesas,i2c-r8a7790" - "renesas,i2c-r8a7791" - "renesas,i2c-r8a7792" - "renesas,i2c-r8a7793" - "renesas,i2c-r8a7794" - "renesas,i2c-r8a7795" - "renesas,i2c-r8a7796" +- compatible: + "renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC. + "renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC. + "renesas,i2c-r8a7790" if the device is a part of a R8A7790 SoC. + "renesas,i2c-r8a7791" if the device is a part of a R8A7791 SoC. + "renesas,i2c-r8a7792" if the device is a part of a R8A7792 SoC. + "renesas,i2c-r8a7793" if the device is a part of a R8A7793 SoC. + "renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC. + "renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC. + "renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC. + "renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device. + "renesas,rcar-gen2-i2c" for a generic R-Car Gen2 compatible device. + "renesas,rcar-gen3-i2c" for a generic R-Car Gen3 compatible device. + "renesas,i2c-rcar" (deprecated) + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first followed + by the generic version. + - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt specifier. @@ -33,7 +41,7 @@ Examples : i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,i2c-r8a7791"; + compatible = "renesas,i2c-r8a7791", "renesas,rcar-gen2-i2c"; reg = <0 0xe6508000 0 0x40>; interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_I2C0>; diff --git a/dts/Bindings/i2c/i2c-sh_mobile.txt b/dts/Bindings/i2c/i2c-sh_mobile.txt index 214f94c25d..7716acc55d 100644 --- a/dts/Bindings/i2c/i2c-sh_mobile.txt +++ b/dts/Bindings/i2c/i2c-sh_mobile.txt @@ -1,8 +1,7 @@ Device tree configuration for Renesas IIC (sh_mobile) driver Required properties: -- compatible : "renesas,iic-<soctype>". "renesas,rmobile-iic" as fallback - Examples with soctypes are: +- compatible : - "renesas,iic-r8a73a4" (R-Mobile APE6) - "renesas,iic-r8a7740" (R-Mobile A1) - "renesas,iic-r8a7790" (R-Car H2) @@ -12,6 +11,17 @@ Required properties: - "renesas,iic-r8a7794" (R-Car E2) - "renesas,iic-r8a7795" (R-Car H3) - "renesas,iic-sh73a0" (SH-Mobile AG5) + - "renesas,rcar-gen2-iic" (generic R-Car Gen2 compatible device) + - "renesas,rcar-gen3-iic" (generic R-Car Gen3 compatible device) + - "renesas,rmobile-iic" (generic device) + + When compatible with a generic R-Car version, nodes + must list the SoC-specific version corresponding to + the platform first followed by the generic R-Car + version. + + renesas,rmobile-iic must always follow. + - reg : address start and address range size of device - interrupts : interrupt of device - clocks : clock for device @@ -31,7 +41,8 @@ Pinctrl properties might be needed, too. See there. Example: iic0: i2c@e6500000 { - compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic"; + compatible = "renesas,iic-r8a7790", "renesas,rcar-gen2-iic", + "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x425>; interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC0>; diff --git a/dts/Bindings/i2c/trivial-devices.txt b/dts/Bindings/i2c/trivial-devices.txt index fbbad64467..cdd7b48826 100644 --- a/dts/Bindings/i2c/trivial-devices.txt +++ b/dts/Bindings/i2c/trivial-devices.txt @@ -39,11 +39,13 @@ dallas,ds75 Digital Thermometer and Thermostat dlg,da9053 DA9053: flexible system level PMIC with multicore support dlg,da9063 DA9063: system PMIC for quad-core application processors domintech,dmard09 DMARD09: 3-axis Accelerometer +domintech,dmard10 DMARD10: 3-axis Accelerometer epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE epson,rx8025 High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer fsl,mc13892 MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51 +fsl,mma7660 MMA7660FC: 3-Axis Orientation/Motion Detection Sensor fsl,mma8450 MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer fsl,mpl3115 MPL3115: Absolute Digital Pressure Sensor fsl,mpr121 MPR121: Proximity Capacitive Touch Sensor Controller @@ -57,6 +59,7 @@ maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface mc,rv3029c2 Real Time Clock Module with I2C-Bus mcube,mc3230 mCube 3-axis 8-bit digital accelerometer +memsic,mxc6225 MEMSIC 2-axis 8-bit digital accelerometer microchip,mcp4531-502 Microchip 7-bit Single I2C Digital Potentiometer (5k) microchip,mcp4531-103 Microchip 7-bit Single I2C Digital Potentiometer (10k) microchip,mcp4531-503 Microchip 7-bit Single I2C Digital Potentiometer (50k) @@ -121,6 +124,11 @@ microchip,mcp4662-502 Microchip 8-bit Dual I2C Digital Potentiometer with NV Mem microchip,mcp4662-103 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (10k) microchip,mcp4662-503 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (50k) microchip,mcp4662-104 Microchip 8-bit Dual I2C Digital Potentiometer with NV Memory (100k) +microchip,tc654 PWM Fan Speed Controller With Fan Fault Detection +microchip,tc655 PWM Fan Speed Controller With Fan Fault Detection +miramems,da226 MiraMEMS DA226 2-axis 14-bit digital accelerometer +miramems,da280 MiraMEMS DA280 3-axis 14-bit digital accelerometer +miramems,da311 MiraMEMS DA311 3-axis 12-bit digital accelerometer national,lm63 Temperature sensor with integrated fan control national,lm75 I2C TEMP SENSOR national,lm80 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor @@ -130,6 +138,8 @@ nuvoton,npct501 i2c trusted platform module (TPM) nuvoton,npct601 i2c trusted platform module (TPM2) nxp,pca9556 Octal SMBus and I2C registered interface nxp,pca9557 8-bit I2C-bus and SMBus I/O port with reset +nxp,pcf2127 Real-time clock +nxp,pcf2129 Real-time clock nxp,pcf8563 Real-time clock/calendar nxp,pcf85063 Tiny Real-Time Clock oki,ml86v7667 OKI ML86V7667 video decoder @@ -146,6 +156,7 @@ ricoh,rv5c387a I2C bus SERIAL INTERFACE REAL-TIME CLOCK IC samsung,24ad0xd1 S524AD0XF1 (128K/256K-bit Serial EEPROM for Low Power) sgx,vz89x SGX Sensortech VZ89X Sensors sii,s35390a 2-wire CMOS real-time clock +silabs,si7020 Relative Humidity and Temperature Sensors skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply st,24c256 i2c serial eeprom (24cxx) st,m41t00 Serial real-time clock (RTC) @@ -158,4 +169,5 @@ ti,tsc2003 I2C Touch-Screen Controller ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface ti,tmp103 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface ti,tmp275 Digital Temperature Sensor +winbond,w83793 Winbond/Nuvoton H/W Monitor winbond,wpct301 i2c trusted platform module (TPM) diff --git a/dts/Bindings/iio/adc/envelope-detector.txt b/dts/Bindings/iio/adc/envelope-detector.txt new file mode 100644 index 0000000000..27544bdd44 --- /dev/null +++ b/dts/Bindings/iio/adc/envelope-detector.txt @@ -0,0 +1,54 @@ +Bindings for ADC envelope detector using a DAC and a comparator + +The DAC is used to find the peak level of an alternating voltage input +signal by a binary search using the output of a comparator wired to +an interrupt pin. Like so: + _ + | \ + input +------>-------|+ \ + | \ + .-------. | }---. + | | | / | + | dac|-->--|- / | + | | |_/ | + | | | + | | | + | irq|------<-------' + | | + '-------' + +Required properties: +- compatible: Should be "axentia,tse850-envelope-detector" +- io-channels: Channel node of the dac to be used for comparator input. +- io-channel-names: Should be "dac". +- interrupt specification for one client interrupt, + see ../../interrupt-controller/interrupts.txt for details. +- interrupt-names: Should be "comp". + +Example: + + &i2c { + dpot: mcp4651-104@28 { + compatible = "microchip,mcp4651-104"; + reg = <0x28>; + #io-channel-cells = <1>; + }; + }; + + dac: dac { + compatible = "dpot-dac"; + vref-supply = <®_3v3>; + io-channels = <&dpot 0>; + io-channel-names = "dpot"; + #io-channel-cells = <1>; + }; + + envelope-detector { + compatible = "axentia,tse850-envelope-detector"; + io-channels = <&dac 0>; + io-channel-names = "dac"; + + interrupt-parent = <&gpio>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "comp"; + }; diff --git a/dts/Bindings/iio/adc/st,stm32-adc.txt b/dts/Bindings/iio/adc/st,stm32-adc.txt new file mode 100644 index 0000000000..49ed82e898 --- /dev/null +++ b/dts/Bindings/iio/adc/st,stm32-adc.txt @@ -0,0 +1,83 @@ +STMicroelectronics STM32 ADC device driver + +STM32 ADC is a successive approximation analog-to-digital converter. +It has several multiplexed input channels. Conversions can be performed +in single, continuous, scan or discontinuous mode. Result of the ADC is +stored in a left-aligned or right-aligned 32-bit data register. +Conversions can be launched in software or using hardware triggers. + +The analog watchdog feature allows the application to detect if the input +voltage goes beyond the user-defined, higher or lower thresholds. + +Each STM32 ADC block can have up to 3 ADC instances. + +Each instance supports two contexts to manage conversions, each one has its +own configurable sequence and trigger: +- regular conversion can be done in sequence, running in background +- injected conversions have higher priority, and so have the ability to + interrupt regular conversion sequence (either triggered in SW or HW). + Regular sequence is resumed, in case it has been interrupted. + +Contents of a stm32 adc root node: +----------------------------------- +Required properties: +- compatible: Should be "st,stm32f4-adc-core". +- reg: Offset and length of the ADC block register set. +- interrupts: Must contain the interrupt for ADC block. +- clocks: Clock for the analog circuitry (common to all ADCs). +- clock-names: Must be "adc". +- interrupt-controller: Identifies the controller node as interrupt-parent +- vref-supply: Phandle to the vref input analog reference voltage. +- #interrupt-cells = <1>; +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties: +- A pinctrl state named "default" for each ADC channel may be defined to set + inX ADC pins in mode of operation for analog input on external pin. + +Contents of a stm32 adc child node: +----------------------------------- +An ADC block node should contain at least one subnode, representing an +ADC instance available on the machine. + +Required properties: +- compatible: Should be "st,stm32f4-adc". +- reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200). +- clocks: Input clock private to this ADC instance. +- interrupt-parent: Phandle to the parent interrupt controller. +- interrupts: IRQ Line for the ADC (e.g. may be 0 for adc@0, 1 for adc@100 or + 2 for adc@200). +- st,adc-channels: List of single-ended channels muxed for this ADC. + It can have up to 16 channels, numbered from 0 to 15 (resp. for in0..in15). +- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in + Documentation/devicetree/bindings/iio/iio-bindings.txt + +Example: + adc: adc@40012000 { + compatible = "st,stm32f4-adc-core"; + reg = <0x40012000 0x400>; + interrupts = <18>; + clocks = <&rcc 0 168>; + clock-names = "adc"; + vref-supply = <®_vref>; + interrupt-controller; + pinctrl-names = "default"; + pinctrl-0 = <&adc3_in8_pin>; + + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "st,stm32f4-adc"; + #io-channel-cells = <1>; + reg = <0x0>; + clocks = <&rcc 0 168>; + interrupt-parent = <&adc>; + interrupts = <0>; + st,adc-channels = <8>; + }; + ... + other adc child nodes follow... + }; diff --git a/dts/Bindings/iio/adc/ti-adc161s626.txt b/dts/Bindings/iio/adc/ti-adc161s626.txt index 9ed2315781..3d25011f0c 100644 --- a/dts/Bindings/iio/adc/ti-adc161s626.txt +++ b/dts/Bindings/iio/adc/ti-adc161s626.txt @@ -3,6 +3,7 @@ Required properties: - compatible: Should be "ti,adc141s626" or "ti,adc161s626" - reg: spi chip select number for the device + - vdda-supply: supply voltage to VDDA pin Recommended properties: - spi-max-frequency: Definition as per @@ -11,6 +12,7 @@ Recommended properties: Example: adc@0 { compatible = "ti,adc161s626"; + vdda-supply = <&vdda_fixed>; reg = <0>; spi-max-frequency = <4300000>; }; diff --git a/dts/Bindings/iio/dac/dpot-dac.txt b/dts/Bindings/iio/dac/dpot-dac.txt new file mode 100644 index 0000000000..fdf47a01bf --- /dev/null +++ b/dts/Bindings/iio/dac/dpot-dac.txt @@ -0,0 +1,41 @@ +Bindings for DAC emulation using a digital potentiometer + +It is assumed that the dpot is used as a voltage divider between the +current dpot wiper setting and the maximum resistance of the dpot. The +divided voltage is provided by a vref regulator. + + .------. + .-----------. | | + | vref |--' .---. + | regulator |--. | | + '-----------' | | d | + | | p | + | | o | wiper + | | t |<---------+ + | | | + | '---' dac output voltage + | | + '------+------------+ + +Required properties: +- compatible: Should be "dpot-dac" +- vref-supply: The regulator supplying the voltage divider. +- io-channels: Channel node of the dpot to be used for the voltage division. +- io-channel-names: Should be "dpot". + +Example: + + &i2c { + dpot: mcp4651-503@28 { + compatible = "microchip,mcp4651-503"; + reg = <0x28>; + #io-channel-cells = <1>; + }; + }; + + dac { + compatible = "dpot-dac"; + vref-supply = <®_3v3>; + io-channels = <&dpot 0>; + io-channel-names = "dpot"; + }; diff --git a/dts/Bindings/iio/dac/mcp4725.txt b/dts/Bindings/iio/dac/mcp4725.txt new file mode 100644 index 0000000000..1bc6c093fb --- /dev/null +++ b/dts/Bindings/iio/dac/mcp4725.txt @@ -0,0 +1,35 @@ +Microchip mcp4725 and mcp4726 DAC device driver + +Required properties: + - compatible: Must be "microchip,mcp4725" or "microchip,mcp4726" + - reg: Should contain the DAC I2C address + - vdd-supply: Phandle to the Vdd power supply. This supply is used as a + voltage reference on mcp4725. It is used as a voltage reference on + mcp4726 if there is no vref-supply specified. + +Optional properties (valid only for mcp4726): + - vref-supply: Optional phandle to the Vref power supply. Vref pin is + used as a voltage reference when this supply is specified. + - microchip,vref-buffered: Boolean to enable buffering of the external + Vref pin. This boolean is not valid without the vref-supply. Quoting + the datasheet: This is offered in cases where the reference voltage + does not have the current capability not to drop its voltage when + connected to the internal resistor ladder circuit. + +Examples: + + /* simple mcp4725 */ + mcp4725@60 { + compatible = "microchip,mcp4725"; + reg = <0x60>; + vdd-supply = <&vdac_vdd>; + }; + + /* mcp4726 with the buffered external reference voltage */ + mcp4726@60 { + compatible = "microchip,mcp4726"; + reg = <0x60>; + vdd-supply = <&vdac_vdd>; + vref-supply = <&vdac_vref>; + microchip,vref-buffered; + }; diff --git a/dts/Bindings/iio/gyroscope/invensense,mpu3050.txt b/dts/Bindings/iio/gyroscope/invensense,mpu3050.txt new file mode 100644 index 0000000000..b0d3b59966 --- /dev/null +++ b/dts/Bindings/iio/gyroscope/invensense,mpu3050.txt @@ -0,0 +1,46 @@ +Invensense MPU-3050 Gyroscope device tree bindings + +Required properties: + - compatible : should be "invensense,mpu3050" + - reg : the I2C address of the sensor + +Optional properties: + - interrupt-parent : should be the phandle for the interrupt controller + - interrupts : interrupt mapping for the trigger interrupt from the + internal oscillator. The following IRQ modes are supported: + IRQ_TYPE_EDGE_RISING, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH and + IRQ_TYPE_LEVEL_LOW. The driver should detect and configure the hardware + for the desired interrupt type. + - vdd-supply : supply regulator for the main power voltage. + - vlogic-supply : supply regulator for the signal voltage. + - mount-matrix : see iio/mount-matrix.txt + +Optional subnodes: + - The MPU-3050 will pass through and forward the I2C signals from the + incoming I2C bus, alternatively drive traffic to a slave device (usually + an accelerometer) on its own initiative. Therefore is supports a subnode + i2c gate node. For details see: i2c/i2c-gate.txt + +Example: + +mpu3050@68 { + compatible = "invensense,mpu3050"; + reg = <0x68>; + interrupt-parent = <&foo>; + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&bar>; + vlogic-supply = <&baz>; + + /* External I2C interface */ + i2c-gate { + #address-cells = <1>; + #size-cells = <0>; + + fnord@18 { + compatible = "fnord"; + reg = <0x18>; + interrupt-parent = <&foo>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + }; + }; +}; diff --git a/dts/Bindings/iio/humidity/hts221.txt b/dts/Bindings/iio/humidity/hts221.txt new file mode 100644 index 0000000000..b20ab9c120 --- /dev/null +++ b/dts/Bindings/iio/humidity/hts221.txt @@ -0,0 +1,22 @@ +* HTS221 STM humidity + temperature sensor + +Required properties: +- compatible: should be "st,hts221" +- reg: i2c address of the sensor / spi cs line + +Optional properties: +- interrupt-parent: should be the phandle for the interrupt controller +- interrupts: interrupt mapping for IRQ. It should be configured with + flags IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING. + + Refer to interrupt-controller/interrupts.txt for generic interrupt + client node bindings. + +Example: + +hts221@5f { + compatible = "st,hts221"; + reg = <0x5f>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; +}; diff --git a/dts/Bindings/iio/light/isl29018.txt b/dts/Bindings/iio/light/isl29018.txt new file mode 100644 index 0000000000..425ab459e2 --- /dev/null +++ b/dts/Bindings/iio/light/isl29018.txt @@ -0,0 +1,28 @@ +* ISL 29018/29023/29035 I2C ALS, Proximity, and Infrared sensor + +Required properties: + + - compatible: Should be one of + "isil,isl29018" + "isil,isl29023" + "isil,isl29035" + - reg: the I2C address of the device + +Optional properties: + + - interrupt-parent: should be the phandle for the interrupt controller + - interrupts: the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic interrupt client + node bindings. + + - vcc-supply: phandle to the regulator that provides power to the sensor. + +Example: + +isl29018@44 { + compatible = "isil,isl29018"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/dts/Bindings/iio/light/tsl2583.txt b/dts/Bindings/iio/light/tsl2583.txt new file mode 100644 index 0000000000..8e2066c83f --- /dev/null +++ b/dts/Bindings/iio/light/tsl2583.txt @@ -0,0 +1,26 @@ +* TAOS TSL 2580/2581/2583 ALS sensor + +Required properties: + + - compatible: Should be one of + "amstaos,tsl2580" + "amstaos,tsl2581" + "amstaos,tsl2583" + - reg: the I2C address of the device + +Optional properties: + + - interrupt-parent: should be the phandle for the interrupt controller + - interrupts: the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic interrupt client + node bindings. + + - vcc-supply: phandle to the regulator that provides power to the sensor. + +Example: + +tsl2581@29 { + compatible = "amstaos,tsl2581"; + reg = <0x29>; +}; diff --git a/dts/Bindings/iio/potentiostat/lmp91000.txt b/dts/Bindings/iio/potentiostat/lmp91000.txt new file mode 100644 index 0000000000..b9b621e94c --- /dev/null +++ b/dts/Bindings/iio/potentiostat/lmp91000.txt @@ -0,0 +1,30 @@ +* Texas Instruments LMP91000 potentiostat + +http://www.ti.com/lit/ds/symlink/lmp91000.pdf + +Required properties: + + - compatible: should be "ti,lmp91000" + - reg: the I2C address of the device + - io-channels: the phandle of the iio provider + + - ti,external-tia-resistor: if the property ti,tia-gain-ohm is not defined this + needs to be set to signal that an external resistor value is being used. + +Optional properties: + + - ti,tia-gain-ohm: ohm value of the internal resistor for the transimpedance + amplifier. Must be 2750, 3500, 7000, 14000, 35000, 120000, or 350000 ohms. + + - ti,rload-ohm: ohm value of the internal resistor load applied to the gas + sensor. Must be 10, 33, 50, or 100 (default) ohms. + +Example: + +lmp91000@48 { + compatible = "ti,lmp91000"; + reg = <0x48>; + ti,tia-gain-ohm = <7500>; + ti,rload = <100>; + io-channels = <&adc>; +}; diff --git a/dts/Bindings/iio/st-sensors.txt b/dts/Bindings/iio/st-sensors.txt index e41fe34016..c040c9ad18 100644 --- a/dts/Bindings/iio/st-sensors.txt +++ b/dts/Bindings/iio/st-sensors.txt @@ -42,6 +42,7 @@ Accelerometers: - st,lsm303agr-accel - st,lis2dh12-accel - st,h3lis331dl-accel +- st,lng2dm-accel Gyroscopes: - st,l3g4200d-gyro diff --git a/dts/Bindings/input/da9062-onkey.txt b/dts/Bindings/input/da9062-onkey.txt index ab0e0488fe..5f9fbc68e5 100644 --- a/dts/Bindings/input/da9062-onkey.txt +++ b/dts/Bindings/input/da9062-onkey.txt @@ -1,32 +1,47 @@ -* Dialog DA9062/63 OnKey Module +* Dialog DA9061/62/63 OnKey Module -This module is part of the DA9062/DA9063. For more details about entire -chips see Documentation/devicetree/bindings/mfd/da9062.txt and -Documentation/devicetree/bindings/mfd/da9063.txt +This module is part of the DA9061/DA9062/DA9063. For more details about entire +DA9062 and DA9061 chips see Documentation/devicetree/bindings/mfd/da9062.txt +For DA9063 see Documentation/devicetree/bindings/mfd/da9063.txt -This module provides KEY_POWER, KEY_SLEEP and events. +This module provides the KEY_POWER event. Required properties: -- compatible: should be one of: - dlg,da9062-onkey - dlg,da9063-onkey +- compatible: should be one of the following valid compatible string lines: + "dlg,da9061-onkey", "dlg,da9062-onkey" + "dlg,da9062-onkey" + "dlg,da9063-onkey" Optional properties: - - dlg,disable-key-power : Disable power-down using a long key-press. If this +- dlg,disable-key-power : Disable power-down using a long key-press. If this entry exists the OnKey driver will remove support for the KEY_POWER key - press. If this entry does not exist then by default the key-press - triggered power down is enabled and the OnKey will support both KEY_POWER - and KEY_SLEEP. + press when triggered using a long press of the OnKey. -Example: - - pmic0: da9062@58 { +Example: DA9063 + pmic0: da9063@58 { onkey { compatible = "dlg,da9063-onkey"; dlg,disable-key-power; }; + }; + +Example: DA9062 + + pmic0: da9062@58 { + onkey { + compatible = "dlg,da9062-onkey"; + dlg,disable-key-power; + }; + }; + +Example: DA9061 using a fall-back compatible for the DA9062 onkey driver + pmic0: da9061@58 { + onkey { + compatible = "dlg,da9061-onkey", "dlg,da9062-onkey"; + dlg,disable-key-power; + }; }; diff --git a/dts/Bindings/input/touchscreen/imx6ul_tsc.txt b/dts/Bindings/input/touchscreen/imx6ul_tsc.txt index 853dff96dd..d4927c202a 100644 --- a/dts/Bindings/input/touchscreen/imx6ul_tsc.txt +++ b/dts/Bindings/input/touchscreen/imx6ul_tsc.txt @@ -17,6 +17,8 @@ Optional properties: This value depends on the touch screen. - pre-charge-time: the touch screen need some time to precharge. This value depends on the touch screen. +- touchscreen-average-samples: Number of data samples which are averaged for + each read. Valid values are 1, 4, 8, 16 and 32. Example: tsc: tsc@02040000 { @@ -32,5 +34,6 @@ Example: xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; measure-delay-time = <0xfff>; pre-charge-time = <0xffff>; + touchscreen-average-samples = <32>; status = "okay"; }; diff --git a/dts/Bindings/input/touchscreen/silead_gsl1680.txt b/dts/Bindings/input/touchscreen/silead_gsl1680.txt index 820fee4b77..ce85ee5082 100644 --- a/dts/Bindings/input/touchscreen/silead_gsl1680.txt +++ b/dts/Bindings/input/touchscreen/silead_gsl1680.txt @@ -18,6 +18,8 @@ Optional properties: - touchscreen-inverted-y : See touchscreen.txt - touchscreen-swapped-x-y : See touchscreen.txt - silead,max-fingers : maximum number of fingers the touchscreen can detect +- vddio-supply : regulator phandle for controller VDDIO +- avdd-supply : regulator phandle for controller AVDD Example: diff --git a/dts/Bindings/input/touchscreen/touchscreen.txt b/dts/Bindings/input/touchscreen/touchscreen.txt index bccaa4e730..537643e86f 100644 --- a/dts/Bindings/input/touchscreen/touchscreen.txt +++ b/dts/Bindings/input/touchscreen/touchscreen.txt @@ -14,6 +14,9 @@ Optional properties for Touchscreens: - touchscreen-fuzz-pressure : pressure noise value of the absolute input device (arbitrary range dependent on the controller) + - touchscreen-average-samples : Number of data samples which are averaged + for each read (valid values dependent on the + controller) - touchscreen-inverted-x : X axis is inverted (boolean) - touchscreen-inverted-y : Y axis is inverted (boolean) - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) diff --git a/dts/Bindings/leds/pca963x.txt b/dts/Bindings/leds/pca963x.txt index dafbe9931c..dfbdb123a9 100644 --- a/dts/Bindings/leds/pca963x.txt +++ b/dts/Bindings/leds/pca963x.txt @@ -7,6 +7,9 @@ Optional properties: - nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults to open-drain, newer chips to totem pole) - nxp,hw-blink : use hardware blinking instead of software blinking +- nxp,period-scale : In some configurations, the chip blinks faster than expected. + This parameter provides a scaling ratio (fixed point, decimal divided + by 1000) to compensate, e.g. 1300=1.3x and 750=0.75x. Each led is represented as a sub-node of the nxp,pca963x device. diff --git a/dts/Bindings/mailbox/brcm,bcm2835-mbox.txt b/dts/Bindings/mailbox/brcm,bcm2835-mbox.txt index e893615ef6..b48d7d3001 100644 --- a/dts/Bindings/mailbox/brcm,bcm2835-mbox.txt +++ b/dts/Bindings/mailbox/brcm,bcm2835-mbox.txt @@ -12,7 +12,7 @@ Required properties: Example: -mailbox: mailbox@7e00b800 { +mailbox: mailbox@7e00b880 { compatible = "brcm,bcm2835-mbox"; reg = <0x7e00b880 0x40>; interrupts = <0 1>; diff --git a/dts/Bindings/mailbox/nvidia,tegra186-hsp.txt b/dts/Bindings/mailbox/nvidia,tegra186-hsp.txt new file mode 100644 index 0000000000..b99d25fc2f --- /dev/null +++ b/dts/Bindings/mailbox/nvidia,tegra186-hsp.txt @@ -0,0 +1,52 @@ +NVIDIA Tegra Hardware Synchronization Primitives (HSP) + +The HSP modules are used for the processors to share resources and communicate +together. It provides a set of hardware synchronization primitives for +interprocessor communication. So the interprocessor communication (IPC) +protocols can use hardware synchronization primitives, when operating between +two processors not in an SMP relationship. + +The features that HSP supported are shared mailboxes, shared semaphores, +arbitrated semaphores and doorbells. + +Required properties: +- name : Should be hsp +- compatible + Array of strings. + one of: + - "nvidia,tegra186-hsp" +- reg : Offset and length of the register set for the device. +- interrupt-names + Array of strings. + Contains a list of names for the interrupts described by the interrupt + property. May contain the following entries, in any order: + - "doorbell" + Users of this binding MUST look up entries in the interrupt property + by name, using this interrupt-names property to do so. +- interrupts + Array of interrupt specifiers. + Must contain one entry per entry in the interrupt-names property, + in a matching order. +- #mbox-cells : Should be 2. + +The mbox specifier of the "mboxes" property in the client node should +contain two data. The first one should be the HSP type and the second +one should be the ID that the client is going to use. Those information +can be found in the following file. + +- <dt-bindings/mailbox/tegra186-hsp.h>. + +Example: + +hsp_top0: hsp@3c00000 { + compatible = "nvidia,tegra186-hsp"; + reg = <0x0 0x03c00000 0x0 0xa0000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "doorbell"; + #mbox-cells = <2>; +}; + +client { + ... + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_XXX>; +}; diff --git a/dts/Bindings/media/exynos5-gsc.txt b/dts/Bindings/media/exynos5-gsc.txt index 5fe9372abb..26ca25b6d2 100644 --- a/dts/Bindings/media/exynos5-gsc.txt +++ b/dts/Bindings/media/exynos5-gsc.txt @@ -3,7 +3,8 @@ G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs. Required properties: -- compatible: should be "samsung,exynos5-gsc" +- compatible: should be "samsung,exynos5-gsc" (for Exynos 5250, 5420 and + 5422 SoCs) or "samsung,exynos5433-gsc" (Exynos 5433) - reg: should contain G-Scaler physical address location and length. - interrupts: should contain G-Scaler interrupt number diff --git a/dts/Bindings/media/hix5hd2-ir.txt b/dts/Bindings/media/hix5hd2-ir.txt index fb5e760664..54e1bede62 100644 --- a/dts/Bindings/media/hix5hd2-ir.txt +++ b/dts/Bindings/media/hix5hd2-ir.txt @@ -8,10 +8,11 @@ Required properties: the device. The interrupt specifier format depends on the interrupt controller parent. - clocks: clock phandle and specifier pair. - - hisilicon,power-syscon: phandle of syscon used to control power. Optional properties: - linux,rc-map-name : Remote control map name. + - hisilicon,power-syscon: DEPRECATED. Don't use this in new dts files. + Provide correct clocks instead. Example node: @@ -19,7 +20,6 @@ Example node: compatible = "hisilicon,hix5hd2-ir"; reg = <0xf8001000 0x1000>; interrupts = <0 47 4>; - clocks = <&clock HIX5HD2_FIXED_24M>; - hisilicon,power-syscon = <&sysctrl>; + clocks = <&clock HIX5HD2_IR_CLOCK>; linux,rc-map-name = "rc-tivo"; }; diff --git a/dts/Bindings/media/i2c/adv7604.txt b/dts/Bindings/media/i2c/adv7604.txt index 8337f75c75..9cbd92eb5d 100644 --- a/dts/Bindings/media/i2c/adv7604.txt +++ b/dts/Bindings/media/i2c/adv7604.txt @@ -34,6 +34,7 @@ The digital output port node must contain at least one endpoint. Optional Properties: - reset-gpios: Reference to the GPIO connected to the device's reset pin. + - default-input: Select which input is selected after reset. Optional Endpoint Properties: @@ -47,8 +48,6 @@ Optional Endpoint Properties: If none of hsync-active, vsync-active and pclk-sample is specified the endpoint will use embedded BT.656 synchronization. - - default-input: Select which input is selected after reset. - Example: hdmi_receiver@4c { diff --git a/dts/Bindings/media/mediatek-mdp.txt b/dts/Bindings/media/mediatek-mdp.txt new file mode 100644 index 0000000000..4182063a54 --- /dev/null +++ b/dts/Bindings/media/mediatek-mdp.txt @@ -0,0 +1,109 @@ +* Mediatek Media Data Path + +Media Data Path is used for scaling and color space conversion. + +Required properties (controller (parent) node): +- compatible: "mediatek,mt8173-mdp" +- mediatek,vpu: the node of video processor unit, see + Documentation/devicetree/bindings/media/mediatek-vpu.txt for details. + +Required properties (all function blocks, child node): +- compatible: Should be one of + "mediatek,mt8173-mdp-rdma" - read DMA + "mediatek,mt8173-mdp-rsz" - resizer + "mediatek,mt8173-mdp-wdma" - write DMA + "mediatek,mt8173-mdp-wrot" - write DMA with rotation +- reg: Physical base address and length of the function block register space +- clocks: device clocks, see + Documentation/devicetree/bindings/clock/clock-bindings.txt for details. +- power-domains: a phandle to the power domain, see + Documentation/devicetree/bindings/power/power_domain.txt for details. + +Required properties (DMA function blocks, child node): +- compatible: Should be one of + "mediatek,mt8173-mdp-rdma" + "mediatek,mt8173-mdp-wdma" + "mediatek,mt8173-mdp-wrot" +- iommus: should point to the respective IOMMU block with master port as + argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt + for details. +- mediatek,larb: must contain the local arbiters in the current Socs, see + Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt + for details. + +Example: +mdp { + compatible = "mediatek,mt8173-mdp"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + mediatek,vpu = <&vpu>; + + mdp_rdma0: rdma@14001000 { + compatible = "mediatek,mt8173-mdp-rdma"; + reg = <0 0x14001000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RDMA0>, + <&mmsys CLK_MM_MUTEX_32K>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_RDMA0>; + mediatek,larb = <&larb0>; + }; + + mdp_rdma1: rdma@14002000 { + compatible = "mediatek,mt8173-mdp-rdma"; + reg = <0 0x14002000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RDMA1>, + <&mmsys CLK_MM_MUTEX_32K>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_RDMA1>; + mediatek,larb = <&larb4>; + }; + + mdp_rsz0: rsz@14003000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14003000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ0>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + }; + + mdp_rsz1: rsz@14004000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14004000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ1>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + }; + + mdp_rsz2: rsz@14005000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14005000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ2>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + }; + + mdp_wdma0: wdma@14006000 { + compatible = "mediatek,mt8173-mdp-wdma"; + reg = <0 0x14006000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WDMA>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WDMA>; + mediatek,larb = <&larb0>; + }; + + mdp_wrot0: wrot@14007000 { + compatible = "mediatek,mt8173-mdp-wrot"; + reg = <0 0x14007000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WROT0>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WROT0>; + mediatek,larb = <&larb0>; + }; + + mdp_wrot1: wrot@14008000 { + compatible = "mediatek,mt8173-mdp-wrot"; + reg = <0 0x14008000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WROT1>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WROT1>; + mediatek,larb = <&larb4>; + }; +}; diff --git a/dts/Bindings/media/mediatek-vcodec.txt b/dts/Bindings/media/mediatek-vcodec.txt index 59a47a5b92..46c15c5417 100644 --- a/dts/Bindings/media/mediatek-vcodec.txt +++ b/dts/Bindings/media/mediatek-vcodec.txt @@ -1,25 +1,74 @@ Mediatek Video Codec Mediatek Video Codec is the video codec hw present in Mediatek SoCs which -supports high resolution encoding functionalities. +supports high resolution encoding and decoding functionalities. Required properties: - compatible : "mediatek,mt8173-vcodec-enc" for encoder + "mediatek,mt8173-vcodec-dec" for decoder. - reg : Physical base address of the video codec registers and length of memory mapped region. - interrupts : interrupt number to the cpu. - mediatek,larb : must contain the local arbiters in the current Socs. - clocks : list of clock specifiers, corresponding to entries in the clock-names property. -- clock-names: encoder must contain "venc_sel_src", "venc_sel", -- "venc_lt_sel_src", "venc_lt_sel". +- clock-names: encoder must contain "venc_sel_src", "venc_sel",, + "venc_lt_sel_src", "venc_lt_sel", decoder must contain "vcodecpll", + "univpll_d2", "clk_cci400_sel", "vdec_sel", "vdecpll", "vencpll", + "venc_lt_sel", "vdec_bus_clk_src". - iommus : should point to the respective IOMMU block with master port as argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt for details. - mediatek,vpu : the node of video processor unit + Example: -vcodec_enc: vcodec@0x18002000 { + +vcodec_dec: vcodec@16000000 { + compatible = "mediatek,mt8173-vcodec-dec"; + reg = <0 0x16000000 0 0x100>, /*VDEC_SYS*/ + <0 0x16020000 0 0x1000>, /*VDEC_MISC*/ + <0 0x16021000 0 0x800>, /*VDEC_LD*/ + <0 0x16021800 0 0x800>, /*VDEC_TOP*/ + <0 0x16022000 0 0x1000>, /*VDEC_CM*/ + <0 0x16023000 0 0x1000>, /*VDEC_AD*/ + <0 0x16024000 0 0x1000>, /*VDEC_AV*/ + <0 0x16025000 0 0x1000>, /*VDEC_PP*/ + <0 0x16026800 0 0x800>, /*VP8_VD*/ + <0 0x16027000 0 0x800>, /*VP6_VD*/ + <0 0x16027800 0 0x800>, /*VP8_VL*/ + <0 0x16028400 0 0x400>; /*VP9_VD*/ + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>; + mediatek,larb = <&larb1>; + iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>, + <&iommu M4U_PORT_HW_VDEC_PP_EXT>, + <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>, + <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>, + <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>, + <&iommu M4U_PORT_HW_VDEC_UFO_EXT>, + <&iommu M4U_PORT_HW_VDEC_VLD_EXT>, + <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>; + mediatek,vpu = <&vpu>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; + clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>, + <&topckgen CLK_TOP_UNIVPLL_D2>, + <&topckgen CLK_TOP_CCI400_SEL>, + <&topckgen CLK_TOP_VDEC_SEL>, + <&topckgen CLK_TOP_VCODECPLL>, + <&apmixedsys CLK_APMIXED_VENCPLL>, + <&topckgen CLK_TOP_VENC_LT_SEL>, + <&topckgen CLK_TOP_VCODECPLL_370P5>; + clock-names = "vcodecpll", + "univpll_d2", + "clk_cci400_sel", + "vdec_sel", + "vdecpll", + "vencpll", + "venc_lt_sel", + "vdec_bus_clk_src"; + }; + + vcodec_enc: vcodec@0x18002000 { compatible = "mediatek,mt8173-vcodec-enc"; reg = <0 0x18002000 0 0x1000>, /*VENC_SYS*/ <0 0x19002000 0 0x1000>; /*VENC_LT_SYS*/ diff --git a/dts/Bindings/media/renesas,fcp.txt b/dts/Bindings/media/renesas,fcp.txt index 27f9b8e459..3ec91803ba 100644 --- a/dts/Bindings/media/renesas,fcp.txt +++ b/dts/Bindings/media/renesas,fcp.txt @@ -11,15 +11,9 @@ are paired with. These DT bindings currently support the FCPV and FCPF. - compatible: Must be one or more of the following - - "renesas,r8a7795-fcpv" for R8A7795 (R-Car H3) compatible 'FCP for VSP' - - "renesas,r8a7795-fcpf" for R8A7795 (R-Car H3) compatible 'FCP for FDP' - "renesas,fcpv" for generic compatible 'FCP for VSP' - "renesas,fcpf" for generic compatible 'FCP for FDP' - When compatible with the generic version, nodes must list the - SoC-specific version corresponding to the platform first, followed by the - family-specific and/or generic versions. - - reg: the register base and size for the device registers - clocks: Reference to the functional clock @@ -32,7 +26,7 @@ Device node example ------------------- fcpvd1: fcp@fea2f000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfea2f000 0 0x200>; clocks = <&cpg CPG_MOD 602>; power-domains = <&sysc R8A7795_PD_A3VP>; diff --git a/dts/Bindings/media/renesas,fdp1.txt b/dts/Bindings/media/renesas,fdp1.txt new file mode 100644 index 0000000000..8dd1007bb5 --- /dev/null +++ b/dts/Bindings/media/renesas,fdp1.txt @@ -0,0 +1,37 @@ +Renesas R-Car Fine Display Processor (FDP1) +------------------------------------------- + +The FDP1 is a de-interlacing module which converts interlaced video to +progressive video. It is capable of performing pixel format conversion between +YCbCr/YUV formats and RGB formats. Only YCbCr/YUV formats are supported as +an input to the module. + +Required properties: + + - compatible: must be "renesas,fdp1" + - reg: the register base and size for the device registers + - interrupts : interrupt specifier for the FDP1 instance + - clocks: reference to the functional clock + +Optional properties: + + - power-domains: reference to the power domain that the FDP1 belongs to, if + any. + - renesas,fcp: a phandle referencing the FCP that handles memory accesses + for the FDP1. Not needed on Gen2, mandatory on Gen3. + +Please refer to the binding documentation for the clock and/or power domain +providers for more details. + + +Device node example +------------------- + + fdp1@fe940000 { + compatible = "renesas,fdp1"; + reg = <0 0xfe940000 0 0x2400>; + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 119>; + power-domains = <&sysc R8A7795_PD_A3VP>; + renesas,fcp = <&fcpf0>; + }; diff --git a/dts/Bindings/media/s5p-mfc.txt b/dts/Bindings/media/s5p-mfc.txt index 92c94f5ecb..2c901286d8 100644 --- a/dts/Bindings/media/s5p-mfc.txt +++ b/dts/Bindings/media/s5p-mfc.txt @@ -12,6 +12,7 @@ Required properties: (b) "samsung,mfc-v6" for MFC v6 present in Exynos5 SoCs (c) "samsung,mfc-v7" for MFC v7 present in Exynos5420 SoC (d) "samsung,mfc-v8" for MFC v8 present in Exynos5800 SoC + (e) "samsung,exynos5433-mfc" for MFC v8 present in Exynos5433 SoC - reg : Physical base address of the IP registers and length of memory mapped region. diff --git a/dts/Bindings/memory-controllers/ti-da8xx-ddrctl.txt b/dts/Bindings/memory-controllers/ti-da8xx-ddrctl.txt new file mode 100644 index 0000000000..ec1dd408d5 --- /dev/null +++ b/dts/Bindings/memory-controllers/ti-da8xx-ddrctl.txt @@ -0,0 +1,20 @@ +* Device tree bindings for Texas Instruments da8xx DDR2/mDDR memory controller + +The DDR2/mDDR memory controller present on Texas Instruments da8xx SoCs features +a set of registers which allow to tweak the controller's behavior. + +Documentation: +OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf + +Required properties: + +- compatible: "ti,da850-ddr-controller" - for da850 SoC based boards +- reg: a tuple containing the base address of the memory + controller and the size of the memory area to map + +Example for da850 shown below. + +ddrctl { + compatible = "ti,da850-ddr-controller"; + reg = <0xb0000000 0xe8>; +}; diff --git a/dts/Bindings/mfd/altera-a10sr.txt b/dts/Bindings/mfd/altera-a10sr.txt new file mode 100644 index 0000000000..ea151f295a --- /dev/null +++ b/dts/Bindings/mfd/altera-a10sr.txt @@ -0,0 +1,46 @@ +* Altera Arria10 Development Kit System Resource Chip + +Required parent device properties: +- compatible : "altr,a10sr" +- spi-max-frequency : Maximum SPI frequency. +- reg : The SPI Chip Select address for the Arria10 + System Resource chip +- interrupt-parent : The parent interrupt controller. +- interrupts : The interrupt line the device is connected to. +- interrupt-controller : Marks the device node as an interrupt controller. +- #interrupt-cells : The number of cells to describe an IRQ, should be 2. + The first cell is the IRQ number. + The second cell is the flags, encoded as trigger + masks from ../interrupt-controller/interrupts.txt. + +The A10SR consists of these sub-devices: + +Device Description +------ ---------- +a10sr_gpio GPIO Controller + +Arria10 GPIO +Required Properties: +- compatible : Should be "altr,a10sr-gpio" +- gpio-controller : Marks the device node as a GPIO Controller. +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify flags. + See ../gpio/gpio.txt for more information. + +Example: + + resource-manager@0 { + compatible = "altr,a10sr"; + reg = <0>; + spi-max-frequency = <100000>; + interrupt-parent = <&portb>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + a10sr_gpio: gpio-controller { + compatible = "altr,a10sr-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; diff --git a/dts/Bindings/mfd/lp873x.txt b/dts/Bindings/mfd/lp873x.txt index 52766c2035..ae9cf39bd1 100644 --- a/dts/Bindings/mfd/lp873x.txt +++ b/dts/Bindings/mfd/lp873x.txt @@ -7,6 +7,9 @@ Required properties: - #gpio-cells: Should be two. The first cell is the pin number and the second cell is used to specify flags. See ../gpio/gpio.txt for more information. + - xxx-in-supply: Phandle to parent supply node of each regulator + populated under regulators node. xxx can be + buck0, buck1, ldo0 or ldo1. - regulators: List of child nodes that specify the regulator initialization data. Example: @@ -17,6 +20,11 @@ pmic: lp8733@60 { gpio-controller; #gpio-cells = <2>; + buck0-in-supply = <&vsys_3v3>; + buck1-in-supply = <&vsys_3v3>; + ldo0-in-supply = <&vsys_3v3>; + ldo1-in-supply = <&vsys_3v3>; + regulators { lp8733_buck0: buck0 { regulator-name = "lp8733-buck0"; diff --git a/dts/Bindings/mfd/max77620.txt b/dts/Bindings/mfd/max77620.txt index 2ad44f7e48..9c16d51cc1 100644 --- a/dts/Bindings/mfd/max77620.txt +++ b/dts/Bindings/mfd/max77620.txt @@ -106,6 +106,18 @@ Here supported time periods by device in microseconds are as follows: MAX77620 supports 40, 80, 160, 320, 640, 1280, 2560 and 5120 microseconds. MAX20024 supports 20, 40, 80, 160, 320, 640, 1280 and 2540 microseconds. +-maxim,power-ok-control: configure map power ok bit + 1: Enables POK(Power OK) to control nRST_IO and GPIO1 + POK function. + 0: Disables POK control. + if property missing, do not configure MPOK bit. + If POK mapping is enabled for GPIO1/nRST_IO then, + GPIO1/nRST_IO pins are HIGH only if all rails + that have POK control enabled are HIGH. + If any of the rails goes down(which are enabled for POK + control) then, GPIO1/nRST_IO goes LOW. + this property is valid for max20024 only. + For DT binding details of different sub modules like GPIO, pincontrol, regulator, power, please refer respective device-tree binding document under their respective sub-system directories. diff --git a/dts/Bindings/mfd/qcom-pm8xxx.txt b/dts/Bindings/mfd/qcom-pm8xxx.txt index 37a088f9a6..9e5eba4a4f 100644 --- a/dts/Bindings/mfd/qcom-pm8xxx.txt +++ b/dts/Bindings/mfd/qcom-pm8xxx.txt @@ -10,6 +10,7 @@ voltages and other various functionality to Qualcomm SoCs. Value type: <string> Definition: must be one of: "qcom,pm8058" + "qcom,pm8821" "qcom,pm8921" - #address-cells: diff --git a/dts/Bindings/mfd/rn5t618.txt b/dts/Bindings/mfd/rn5t618.txt index 9e6770b105..65c23263cc 100644 --- a/dts/Bindings/mfd/rn5t618.txt +++ b/dts/Bindings/mfd/rn5t618.txt @@ -1,21 +1,25 @@ * Ricoh RN5T567/RN5T618 PMIC -Ricoh RN5T567/RN5T618 is a power management IC family which integrates -3 to 4 step-down DCDC converters, 7 low-dropout regulators, GPIOs and -a watchdog timer. The RN5T618 provides additionally a Li-ion battery -charger, fuel gauge and an ADC. It can be controlled through an I2C -interface. +Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which +integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators, +GPIOs, and a watchdog timer. It can be controlled through an I2C interface. +The RN5T618/RC5T619 provides additionally a Li-ion battery charger, +fuel gauge, and an ADC. +The RC5T619 additionnally includes USB charger detection and an RTC. Required properties: - compatible: must be one of "ricoh,rn5t567" "ricoh,rn5t618" + "ricoh,rc5t619" - reg: the I2C slave address of the device Sub-nodes: - regulators: the node is required if the regulator functionality is needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4 - (RN5T567), LDO1, LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2. + (RN5T567/RC5T619), LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, LDO8, + LDO9, LDO10, LDORTC1 and LDORTC2. + LDO7-10 are specific to RC5T619. The common bindings for each individual regulator can be found in: Documentation/devicetree/bindings/regulator/regulator.txt diff --git a/dts/Bindings/mfd/tps65086.txt b/dts/Bindings/mfd/tps65086.txt index d3705612a8..9cfa886fe9 100644 --- a/dts/Bindings/mfd/tps65086.txt +++ b/dts/Bindings/mfd/tps65086.txt @@ -23,7 +23,7 @@ Required properties: defined below. Optional regulator properties: - - ti,regulator-step-size-25mv : This is applicable for buck[1,2,6], set this + - ti,regulator-step-size-25mv : This is applicable for buck[1-6], set this if the regulator is factory set with a 25mv step voltage mapping. - ti,regulator-decay : This is applicable for buck[1-6], set this if diff --git a/dts/Bindings/mmc/amlogic,meson-gx.txt b/dts/Bindings/mmc/amlogic,meson-gx.txt new file mode 100644 index 0000000000..7f95ec4008 --- /dev/null +++ b/dts/Bindings/mmc/amlogic,meson-gx.txt @@ -0,0 +1,32 @@ +Amlogic SD / eMMC controller for S905/GXBB family SoCs + +The MMC 5.1 compliant host controller on Amlogic provides the +interface for SD, eMMC and SDIO devices. + +This file documents the properties in addition to those available in +the MMC core bindings, documented by mmc.txt. + +Required properties: +- compatible : contains one of: + - "amlogic,meson-gx-mmc" + - "amlogic,meson-gxbb-mmc" + - "amlogic,meson-gxl-mmc" + - "amlogic,meson-gxm-mmc" +- clocks : A list of phandle + clock-specifier pairs for the clocks listed in clock-names. +- clock-names: Should contain the following: + "core" - Main peripheral bus clock + "clkin0" - Parent clock of internal mux + "clkin1" - Other parent clock of internal mux + The driver has an interal mux clock which switches between clkin0 and clkin1 depending on the + clock rate requested by the MMC core. + +Example: + + sd_emmc_a: mmc@70000 { + compatible = "amlogic,meson-gxbb-mmc"; + reg = <0x0 0x70000 0x0 0x2000>; + interrupts = < GIC_SPI 216 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_SD_EMMC_A>, <&xtal>, <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; + pinctrl-0 = <&emmc_pins>; + }; diff --git a/dts/Bindings/mmc/brcm,sdhci-iproc.txt b/dts/Bindings/mmc/brcm,sdhci-iproc.txt index be56d2bd47..954561d09a 100644 --- a/dts/Bindings/mmc/brcm,sdhci-iproc.txt +++ b/dts/Bindings/mmc/brcm,sdhci-iproc.txt @@ -7,6 +7,15 @@ Required properties: - compatible : Should be one of the following "brcm,bcm2835-sdhci" "brcm,sdhci-iproc-cygnus" + "brcm,sdhci-iproc" + +Use brcm2835-sdhci for Rasperry PI. + +Use sdhci-iproc-cygnus for Broadcom SDHCI Controllers +restricted to 32bit host accesses to SDHCI registers. + +Use sdhci-iproc for Broadcom SDHCI Controllers that allow standard +8, 16, 32-bit host access to SDHCI register. - clocks : The clock feeding the SDHCI controller. diff --git a/dts/Bindings/mmc/renesas,mmcif.txt b/dts/Bindings/mmc/renesas,mmcif.txt index ff611fa668..e4ba92aa03 100644 --- a/dts/Bindings/mmc/renesas,mmcif.txt +++ b/dts/Bindings/mmc/renesas,mmcif.txt @@ -8,11 +8,14 @@ Required properties: - compatible: should be "renesas,mmcif-<soctype>", "renesas,sh-mmcif" as a fallback. Examples with <soctype> are: + - "renesas,mmcif-r8a73a4" for the MMCIF found in r8a73a4 SoCs - "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs + - "renesas,mmcif-r8a7778" for the MMCIF found in r8a7778 SoCs - "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs - "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs - "renesas,mmcif-r8a7793" for the MMCIF found in r8a7793 SoCs - "renesas,mmcif-r8a7794" for the MMCIF found in r8a7794 SoCs + - "renesas,mmcif-sh73a0" for the MMCIF found in sh73a0 SoCs - clocks: reference to the functional clock diff --git a/dts/Bindings/mmc/rockchip-dw-mshc.txt b/dts/Bindings/mmc/rockchip-dw-mshc.txt index 07184e8f89..ea9c1c9607 100644 --- a/dts/Bindings/mmc/rockchip-dw-mshc.txt +++ b/dts/Bindings/mmc/rockchip-dw-mshc.txt @@ -13,6 +13,7 @@ Required Properties: - "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following, before RK3288 - "rockchip,rk3288-dw-mshc": for Rockchip RK3288 + - "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK1108 - "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036 - "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368 - "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399 diff --git a/dts/Bindings/mmc/sdhci-cadence.txt b/dts/Bindings/mmc/sdhci-cadence.txt new file mode 100644 index 0000000000..c0f37cb41a --- /dev/null +++ b/dts/Bindings/mmc/sdhci-cadence.txt @@ -0,0 +1,32 @@ +* Cadence SD/SDIO/eMMC Host Controller + +Required properties: +- compatible: should be one of the following: + "cdns,sd4hc" - default of the IP + "socionext,uniphier-sd4hc" - for Socionext UniPhier SoCs +- reg: offset and length of the register set for the device. +- interrupts: a single interrupt specifier. +- clocks: phandle to the input clock. + +Optional properties: +For eMMC configuration, supported speed modes are not indicated by the SDHCI +Capabilities Register. Instead, the following properties should be specified +if supported. See mmc.txt for details. +- mmc-ddr-1_8v +- mmc-ddr-1_2v +- mmc-hs200-1_8v +- mmc-hs200-1_2v +- mmc-hs400-1_8v +- mmc-hs400-1_2v + +Example: + emmc: sdhci@5a000000 { + compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; + reg = <0x5a000000 0x400>; + interrupts = <0 78 4>; + clocks = <&clk 4>; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + }; diff --git a/dts/Bindings/mmc/sdhci-msm.txt b/dts/Bindings/mmc/sdhci-msm.txt index 485483a63d..0576264eab 100644 --- a/dts/Bindings/mmc/sdhci-msm.txt +++ b/dts/Bindings/mmc/sdhci-msm.txt @@ -17,6 +17,7 @@ Required properties: "iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required) "core" - SDC MMC clock (MCLK) (required) "bus" - SDCC bus voter clock (optional) + "xo" - TCXO clock (optional) Example: diff --git a/dts/Bindings/mmc/sdhci.txt b/dts/Bindings/mmc/sdhci.txt new file mode 100644 index 0000000000..1c95a1a555 --- /dev/null +++ b/dts/Bindings/mmc/sdhci.txt @@ -0,0 +1,13 @@ +The properties specific for SD host controllers. For properties shared by MMC +host controllers refer to the mmc[1] bindings. + + [1] Documentation/devicetree/bindings/mmc/mmc.txt + +Optional properties: +- sdhci-caps-mask: The sdhci capabilities register is incorrect. This 64bit + property corresponds to the bits in the sdhci capabilty register. If the bit + is on in the mask then the bit is incorrect in the register and should be + turned off, before applying sdhci-caps. +- sdhci-caps: The sdhci capabilities register is incorrect. This 64bit + property corresponds to the bits in the sdhci capability register. If the + bit is on in the property then the bit should be turned on. diff --git a/dts/Bindings/mmc/synopsys-dw-mshc.txt b/dts/Bindings/mmc/synopsys-dw-mshc.txt index bfa461aaac..7fd17c3da1 100644 --- a/dts/Bindings/mmc/synopsys-dw-mshc.txt +++ b/dts/Bindings/mmc/synopsys-dw-mshc.txt @@ -59,8 +59,9 @@ Optional properties: is specified and the ciu clock is specified then we'll try to set the ciu clock to this at probe time. -* clock-freq-min-max: Minimum and Maximum clock frequency for card output +* clock-freq-min-max (DEPRECATED): Minimum and Maximum clock frequency for card output clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default. + (Use the "max-frequency" instead of "clock-freq-min-max".) * num-slots: specifies the number of slots supported by the controller. The number of physical slots actually used could be equal or less than the @@ -74,11 +75,6 @@ Optional properties: * card-detect-delay: Delay in milli-seconds before detecting card after card insert event. The default value is 0. -* supports-highspeed (DEPRECATED): Enables support for high speed cards (up to 50MHz) - (use "cap-mmc-highspeed" or "cap-sd-highspeed" instead) - -* broken-cd: as documented in mmc core bindings. - * vmmc-supply: The phandle to the regulator to use for vmmc. If this is specified we'll defer probe until we can find this regulator. diff --git a/dts/Bindings/mmc/tmio_mmc.txt b/dts/Bindings/mmc/tmio_mmc.txt index 13df9c2399..a1650edfd2 100644 --- a/dts/Bindings/mmc/tmio_mmc.txt +++ b/dts/Bindings/mmc/tmio_mmc.txt @@ -11,8 +11,8 @@ optional bindings can be used. Required properties: - compatible: "renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit - "renesas,sdhi-sh7372" - SDHI IP on SH7372 SoC "renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC + "renesas,sdhi-r7s72100" - SDHI IP on R7S72100 SoC "renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC "renesas,sdhi-r8a7740" - SDHI IP on R8A7740 SoC "renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC diff --git a/dts/Bindings/mtd/oxnas-nand.txt b/dts/Bindings/mtd/oxnas-nand.txt new file mode 100644 index 0000000000..56d5c19da4 --- /dev/null +++ b/dts/Bindings/mtd/oxnas-nand.txt @@ -0,0 +1,41 @@ +* Oxford Semiconductor OXNAS NAND Controller + +Please refer to nand.txt for generic information regarding MTD NAND bindings. + +Required properties: + - compatible: "oxsemi,ox820-nand" + - reg: Base address and length for NAND mapped memory. + +Optional Properties: + - clocks: phandle to the NAND gate clock if needed. + - resets: phandle to the NAND reset control if needed. + +Example: + +nandc: nand-controller@41000000 { + compatible = "oxsemi,ox820-nand"; + reg = <0x41000000 0x100000>; + clocks = <&stdclk CLK_820_NAND>; + resets = <&reset RESET_NAND>; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "hamming"; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00e00000>; + read-only; + }; + + partition@e00000 { + label = "ubi"; + reg = <0x00e00000 0x07200000>; + }; + }; +}; diff --git a/dts/Bindings/mtd/samsung-s3c2410.txt b/dts/Bindings/mtd/samsung-s3c2410.txt new file mode 100644 index 0000000000..0040eb8895 --- /dev/null +++ b/dts/Bindings/mtd/samsung-s3c2410.txt @@ -0,0 +1,56 @@ +* Samsung S3C2410 and compatible NAND flash controller + +Required properties: +- compatible : The possible values are: + "samsung,s3c2410-nand" + "samsung,s3c2412-nand" + "samsung,s3c2440-nand" +- reg : register's location and length. +- #address-cells, #size-cells : see nand.txt +- clocks : phandle to the nand controller clock +- clock-names : must contain "nand" + +Optional child nodes: +Child nodes representing the available nand chips. + +Optional child properties: +- nand-ecc-mode : see nand.txt +- nand-on-flash-bbt : see nand.txt + +Each child device node may optionally contain a 'partitions' sub-node, +which further contains sub-nodes describing the flash partition mapping. +See partition.txt for more detail. + +Example: + +nand-controller@4e000000 { + compatible = "samsung,s3c2440-nand"; + reg = <0x4e000000 0x40>; + + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&clocks HCLK_NAND>; + clock-names = "nand"; + + nand { + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0 0x040000>; + }; + + partition@40000 { + label = "kernel"; + reg = <0x040000 0x500000>; + }; + }; + }; +}; diff --git a/dts/Bindings/mtd/tango-nand.txt b/dts/Bindings/mtd/tango-nand.txt new file mode 100644 index 0000000000..ad5a02f2ac --- /dev/null +++ b/dts/Bindings/mtd/tango-nand.txt @@ -0,0 +1,38 @@ +Sigma Designs Tango4 NAND Flash Controller (NFC) + +Required properties: + +- compatible: "sigma,smp8758-nand" +- reg: address/size of nfc_reg, nfc_mem, and pbus_reg +- dmas: reference to the DMA channel used by the controller +- dma-names: "nfc_sbox" +- clocks: reference to the system clock +- #address-cells: <1> +- #size-cells: <0> + +Children nodes represent the available NAND chips. +See Documentation/devicetree/bindings/mtd/nand.txt for generic bindings. + +Example: + + nandc: nand-controller@2c000 { + compatible = "sigma,smp8758-nand"; + reg = <0x2c000 0x30 0x2d000 0x800 0x20000 0x1000>; + dmas = <&dma0 3>; + dma-names = "nfc_sbox"; + clocks = <&clkgen SYS_CLK>; + #address-cells = <1>; + #size-cells = <0>; + + nand@0 { + reg = <0>; /* CS0 */ + nand-ecc-strength = <14>; + nand-ecc-step-size = <1024>; + }; + + nand@1 { + reg = <1>; /* CS1 */ + nand-ecc-strength = <14>; + nand-ecc-step-size = <1024>; + }; + }; diff --git a/dts/Bindings/net/brcm,amac.txt b/dts/Bindings/net/brcm,amac.txt index ba5ecc1041..2fefa1a44a 100644 --- a/dts/Bindings/net/brcm,amac.txt +++ b/dts/Bindings/net/brcm,amac.txt @@ -2,11 +2,17 @@ Broadcom AMAC Ethernet Controller Device Tree Bindings ------------------------------------------------------------- Required properties: - - compatible: "brcm,amac" or "brcm,nsp-amac" - - reg: Address and length of the GMAC registers, - Address and length of the GMAC IDM registers - - reg-names: Names of the registers. Must have both "amac_base" and - "idm_base" + - compatible: "brcm,amac" + "brcm,nsp-amac" + "brcm,ns2-amac" + - reg: Address and length of the register set for the device. It + contains the information of registers in the same order as + described by reg-names + - reg-names: Names of the registers. + "amac_base": Address and length of the GMAC registers + "idm_base": Address and length of the GMAC IDM registers + "nicpm_base": Address and length of the NIC Port Manager + registers (required for Northstar2) - interrupts: Interrupt number Optional properties: diff --git a/dts/Bindings/net/can/rcar_can.txt b/dts/Bindings/net/can/rcar_can.txt index 8d40ab27bc..06bb7cc334 100644 --- a/dts/Bindings/net/can/rcar_can.txt +++ b/dts/Bindings/net/can/rcar_can.txt @@ -10,6 +10,7 @@ Required properties: "renesas,can-r8a7793" if CAN controller is a part of R8A7793 SoC. "renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC. "renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC. + "renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC. "renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-can" for a generic R-Car Gen2 compatible device. "renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device. @@ -24,11 +25,12 @@ Required properties: - pinctrl-0: pin control group to be used for this controller. - pinctrl-names: must be "default". -Required properties for "renesas,can-r8a7795" compatible: -In R8A7795 SoC, "clkp2" can be CANFD clock. This is a div6 clock and can be -used by both CAN and CAN FD controller at the same time. It needs to be scaled -to maximum frequency if any of these controllers use it. This is done using -the below properties. +Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796" +compatible: +In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock +and can be used by both CAN and CAN FD controller at the same time. It needs to +be scaled to maximum frequency if any of these controllers use it. This is done +using the below properties: - assigned-clocks: phandle of clkp2(CANFD) clock. - assigned-clock-rates: maximum frequency of this clock. diff --git a/dts/Bindings/net/can/rcar_canfd.txt b/dts/Bindings/net/can/rcar_canfd.txt index 22a6f10bab..93c3a6ae32 100644 --- a/dts/Bindings/net/can/rcar_canfd.txt +++ b/dts/Bindings/net/can/rcar_canfd.txt @@ -5,13 +5,14 @@ Required properties: - compatible: Must contain one or more of the following: - "renesas,rcar-gen3-canfd" for R-Car Gen3 compatible controller. - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller. + - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3) compatible controller. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first, followed by the family-specific and/or generic versions. - reg: physical base address and size of the R-Car CAN FD register map. -- interrupts: interrupt specifier for the Global & Channel interrupts +- interrupts: interrupt specifiers for the Channel & Global interrupts - clocks: phandles and clock specifiers for 3 clock inputs. - clock-names: 3 clock input name strings: "fck", "canfd", "can_clk". - pinctrl-0: pin control group to be used for this controller. @@ -23,11 +24,12 @@ The name of the child nodes are "channel0" and "channel1" respectively. Each child node supports the "status" property only, which is used to enable/disable the respective channel. -Required properties for "renesas,r8a7795-canfd" compatible: -In R8A7795 SoC, canfd clock is a div6 clock and can be used by both CAN -and CAN FD controller at the same time. It needs to be scaled to maximum -frequency if any of these controllers use it. This is done using the -below properties. +Required properties for "renesas,r8a7795-canfd" and "renesas,r8a7796-canfd" +compatible: +In R8A7795 and R8A7796 SoCs, canfd clock is a div6 clock and can be used by both +CAN and CAN FD controller at the same time. It needs to be scaled to maximum +frequency if any of these controllers use it. This is done using the below +properties: - assigned-clocks: phandle of canfd clock. - assigned-clock-rates: maximum frequency of this clock. diff --git a/dts/Bindings/net/cpsw.txt b/dts/Bindings/net/cpsw.txt index 5ad439f301..ebda7c9345 100644 --- a/dts/Bindings/net/cpsw.txt +++ b/dts/Bindings/net/cpsw.txt @@ -20,8 +20,6 @@ Required properties: - slaves : Specifies number for slaves - active_slave : Specifies the slave to use for time stamping, ethtool and SIOCGMIIPHY -- cpts_clock_mult : Numerator to convert input clock ticks into nanoseconds -- cpts_clock_shift : Denominator to convert input clock ticks into nanoseconds Optional properties: - ti,hwmods : Must be "cpgmac0" @@ -35,7 +33,11 @@ Optional properties: For example in dra72x-evm, pcf gpio has to be driven low so that cpsw slave 0 and phy data lines are connected via mux. - +- cpts_clock_mult : Numerator to convert input clock ticks into nanoseconds +- cpts_clock_shift : Denominator to convert input clock ticks into nanoseconds + Mult and shift will be calculated basing on CPTS + rftclk frequency if both cpts_clock_shift and + cpts_clock_mult properties are not provided. Slave Properties: Required properties: diff --git a/dts/Bindings/net/dsa/marvell.txt b/dts/Bindings/net/dsa/marvell.txt index 7629189398..b3dd6b40e0 100644 --- a/dts/Bindings/net/dsa/marvell.txt +++ b/dts/Bindings/net/dsa/marvell.txt @@ -14,22 +14,42 @@ The properties described here are those specific to Marvell devices. Additional required and optional properties can be found in dsa.txt. Required properties: -- compatible : Should be one of "marvell,mv88e6085", +- compatible : Should be one of "marvell,mv88e6085" or + "marvell,mv88e6190" - reg : Address on the MII bus for the switch. Optional properties: - reset-gpios : Should be a gpio specifier for a reset line - +- interrupt-parent : Parent interrupt controller +- interrupts : Interrupt from the switch +- interrupt-controller : Indicates the switch is itself an interrupt + controller. This is used for the PHY interrupts. +#interrupt-cells = <2> : Controller uses two cells, number and flag +- mdio : container of PHY and devices on the switches MDIO + bus Example: mdio { #address-cells = <1>; #size-cells = <0>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; switch0: switch@0 { compatible = "marvell,mv88e6085"; reg = <0>; reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch1phy0: switch1phy0@0 { + reg = <0>; + interrupt-parent = <&switch0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + }; }; diff --git a/dts/Bindings/net/hisilicon-hix5hd2-gmac.txt b/dts/Bindings/net/hisilicon-hix5hd2-gmac.txt index 75d398bb1f..eea73adc67 100644 --- a/dts/Bindings/net/hisilicon-hix5hd2-gmac.txt +++ b/dts/Bindings/net/hisilicon-hix5hd2-gmac.txt @@ -1,7 +1,15 @@ Hisilicon hix5hd2 gmac controller Required properties: -- compatible: should be "hisilicon,hix5hd2-gmac". +- compatible: should contain one of the following SoC strings: + * "hisilicon,hix5hd2-gmac" + * "hisilicon,hi3798cv200-gmac" + * "hisilicon,hi3516a-gmac" + and one of the following version string: + * "hisilicon,hisi-gmac-v1" + * "hisilicon,hisi-gmac-v2" + The version v1 includes SoCs hix5hd2. + The version v2 includes SoCs hi3798cv200, hi3516a. - reg: specifies base physical address(s) and size of the device registers. The first region is the MAC register base and size. The second region is external interface control register. @@ -12,6 +20,16 @@ Required properties: - phy-handle: see ethernet.txt [1]. - mac-address: see ethernet.txt [1]. - clocks: clock phandle and specifier pair. +- clock-names: contain the clock name "mac_core"(required) and "mac_ifc"(optional). +- resets: should contain the phandle to the MAC core reset signal(optional), + the MAC interface reset signal(optional) + and the PHY reset signal(optional). +- reset-names: contain the reset signal name "mac_core"(optional), + "mac_ifc"(optional) and "phy"(optional). +- hisilicon,phy-reset-delays-us: triplet of delays if PHY reset signal given. + The 1st cell is reset pre-delay in micro seconds. + The 2nd cell is reset pulse in micro seconds. + The 3rd cell is reset post-delay in micro seconds. - PHY subnode: inherits from phy binding [2] @@ -20,15 +38,19 @@ Required properties: Example: gmac0: ethernet@f9840000 { - compatible = "hisilicon,hix5hd2-gmac"; + compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2"; reg = <0xf9840000 0x1000>,<0xf984300c 0x4>; interrupts = <0 71 4>; #address-cells = <1>; #size-cells = <0>; - phy-mode = "mii"; + phy-mode = "rgmii"; phy-handle = <&phy2>; mac-address = [00 00 00 00 00 00]; - clocks = <&clock HIX5HD2_MAC0_CLK>; + clocks = <&crg HISTB_ETH0_MAC_CLK>, <&crg HISTB_ETH0_MACIF_CLK>; + clock-names = "mac_core", "mac_ifc"; + resets = <&crg 0xcc 8>, <&crg 0xcc 10>, <&crg 0xcc 12>; + reset-names = "mac_core", "mac_ifc", "phy"; + hisilicon,phy-reset-delays-us = <10000 10000 30000>; phy2: ethernet-phy@2 { reg = <2>; diff --git a/dts/Bindings/net/hisilicon-hns-dsaf.txt b/dts/Bindings/net/hisilicon-hns-dsaf.txt index d4b7f2e499..abfbeecbcf 100644 --- a/dts/Bindings/net/hisilicon-hns-dsaf.txt +++ b/dts/Bindings/net/hisilicon-hns-dsaf.txt @@ -45,6 +45,12 @@ Required properties: depends on the hardware user manual. - port-mode-offset: is offset of port mode field for each port in dsaf. Its value depends on the hardware user manual. +- mc-mac-mask: mask of multicast address, determines bit in multicast address + to set: + 1 stands for this bit will be precisely matched, TCAM will check this bit of + MAC address. + 0 stands for this bit will be fuzzy matched, TCAM won't care about this bit + of MAC address. [1] Documentation/devicetree/bindings/net/phy.txt @@ -74,10 +80,12 @@ dsaf0: dsa@c7000000 { reg = 0; phy-handle = <&phy0>; serdes-syscon = <&serdes>; + mc-mac-mask = [ff f0 00 00 00 00]; }; port@1 { reg = 1; serdes-syscon = <&serdes>; + mc-mac-mask = [ff f0 00 00 00 00]; }; }; diff --git a/dts/Bindings/net/marvell-armada-370-neta.txt b/dts/Bindings/net/marvell-armada-370-neta.txt index 73be897081..7aa840c876 100644 --- a/dts/Bindings/net/marvell-armada-370-neta.txt +++ b/dts/Bindings/net/marvell-armada-370-neta.txt @@ -1,7 +1,10 @@ -* Marvell Armada 370 / Armada XP Ethernet Controller (NETA) +* Marvell Armada 370 / Armada XP / Armada 3700 Ethernet Controller (NETA) Required properties: -- compatible: "marvell,armada-370-neta" or "marvell,armada-xp-neta". +- compatible: could be one of the followings + "marvell,armada-370-neta" + "marvell,armada-xp-neta" + "marvell,armada-3700-neta" - reg: address and length of the register set for the device. - interrupts: interrupt for the device - phy: See ethernet.txt file in the same directory. diff --git a/dts/Bindings/net/mdio-mux-mmioreg.txt b/dts/Bindings/net/mdio-mux-mmioreg.txt index 8516929c72..065e8bdb95 100644 --- a/dts/Bindings/net/mdio-mux-mmioreg.txt +++ b/dts/Bindings/net/mdio-mux-mmioreg.txt @@ -3,7 +3,7 @@ Properties for an MDIO bus multiplexer controlled by a memory-mapped device This is a special case of a MDIO bus multiplexer. A memory-mapped device, like an FPGA, is used to control which child bus is connected. The mdio-mux node must be a child of the memory-mapped device. The driver currently only -supports devices with eight-bit registers. +supports devices with 8, 16 or 32-bit registers. Required properties in addition to the generic multiplexer properties: @@ -11,7 +11,7 @@ Required properties in addition to the generic multiplexer properties: - reg : integer, contains the offset of the register that controls the bus multiplexer. The size field in the 'reg' property is the size of - register, and must therefore be 1. + register, and must therefore be 1, 2, or 4. - mux-mask : integer, contains an eight-bit mask that specifies which bits in the register control the actual bus multiplexer. The diff --git a/dts/Bindings/net/mscc-phy-vsc8531.txt b/dts/Bindings/net/mscc-phy-vsc8531.txt index 99c7eb0a00..bdefefc665 100644 --- a/dts/Bindings/net/mscc-phy-vsc8531.txt +++ b/dts/Bindings/net/mscc-phy-vsc8531.txt @@ -6,22 +6,27 @@ Required properties: Documentation/devicetree/bindings/net/phy.txt Optional properties: -- vsc8531,vddmac : The vddmac in mV. +- vsc8531,vddmac : The vddmac in mV. Allowed values is listed + in the first row of Table 1 (below). + This property is only used in combination + with the 'edge-slowdown' property. + Default value is 3300. - vsc8531,edge-slowdown : % the edge should be slowed down relative to - the fastest possible edge time. Native sign - need not enter. + the fastest possible edge time. Edge rate sets the drive strength of the MAC - interface output signals. Changing the drive - strength will affect the edge rate of the output - signal. The goal of this setting is to help - reduce electrical emission (EMI) by being able - to reprogram drive strength and in effect slow - down the edge rate if desired. Table 1 shows the - impact to the edge rate per VDDMAC supply for each - drive strength setting. - Ref: Table:1 - Edge rate change below. - -Note: see dt-bindings/net/mscc-phy-vsc8531.h for applicable values + interface output signals. Changing the + drive strength will affect the edge rate of + the output signal. The goal of this setting + is to help reduce electrical emission (EMI) + by being able to reprogram drive strength + and in effect slow down the edge rate if + desired. + To adjust the edge-slowdown, the 'vddmac' + must be specified. Table 1 lists the + supported edge-slowdown values for a given + 'vddmac'. + Default value is 0%. + Ref: Table:1 - Edge rate change (below). Table: 1 - Edge rate change ----------------------------------------------------------------| @@ -29,23 +34,23 @@ Table: 1 - Edge rate change | | | 3300 mV 2500 mV 1800 mV 1500 mV | |---------------------------------------------------------------| -| Default Deafult Default Default | +| 0% 0% 0% 0% | | (Fastest) (recommended) (recommended) | |---------------------------------------------------------------| -| -2% -3% -5% -6% | +| 2% 3% 5% 6% | |---------------------------------------------------------------| -| -4% -6% -9% -14% | +| 4% 6% 9% 14% | |---------------------------------------------------------------| -| -7% -10% -16% -21% | +| 7% 10% 16% 21% | |(recommended) (recommended) | |---------------------------------------------------------------| -| -10% -14% -23% -29% | +| 10% 14% 23% 29% | |---------------------------------------------------------------| -| -17% -23% -35% -42% | +| 17% 23% 35% 42% | |---------------------------------------------------------------| -| -29% -37% -52% -58% | +| 29% 37% 52% 58% | |---------------------------------------------------------------| -| -53% -63% -76% -77% | +| 53% 63% 76% 77% | | (slowest) | |---------------------------------------------------------------| @@ -54,5 +59,5 @@ Example: vsc8531_0: ethernet-phy@0 { compatible = "ethernet-phy-id0007.0570"; vsc8531,vddmac = <3300>; - vsc8531,edge-slowdown = <21>; + vsc8531,edge-slowdown = <7>; }; diff --git a/dts/Bindings/net/oxnas-dwmac.txt b/dts/Bindings/net/oxnas-dwmac.txt new file mode 100644 index 0000000000..df0534e2ed --- /dev/null +++ b/dts/Bindings/net/oxnas-dwmac.txt @@ -0,0 +1,39 @@ +* Oxford Semiconductor OXNAS DWMAC Ethernet controller + +The device inherits all the properties of the dwmac/stmmac devices +described in the file stmmac.txt in the current directory with the +following changes. + +Required properties on all platforms: + +- compatible: For the OX820 SoC, it should be : + - "oxsemi,ox820-dwmac" to select glue + - "snps,dwmac-3.512" to select IP version. + +- clocks: Should contain phandles to the following clocks +- clock-names: Should contain the following: + - "stmmaceth" for the host clock - see stmmac.txt + - "gmac" for the peripheral gate clock + +- oxsemi,sys-ctrl: a phandle to the system controller syscon node + +Example : + +etha: ethernet@40400000 { + compatible = "oxsemi,ox820-dwmac", "snps,dwmac-3.512"; + reg = <0x40400000 0x2000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + mac-address = [000000000000]; /* Filled in by U-Boot */ + phy-mode = "rgmii"; + + clocks = <&stdclk CLK_820_ETHA>, <&gmacclk>; + clock-names = "gmac", "stmmaceth"; + resets = <&reset RESET_MAC>; + + /* Regmap for sys registers */ + oxsemi,sys-ctrl = <&sys>; + + status = "disabled"; +}; diff --git a/dts/Bindings/net/phy.txt b/dts/Bindings/net/phy.txt index bc1c3c8bf8..ff1bc4b1bb 100644 --- a/dts/Bindings/net/phy.txt +++ b/dts/Bindings/net/phy.txt @@ -35,6 +35,18 @@ Optional Properties: - broken-turn-around: If set, indicates the PHY device does not correctly release the turn around line low at the end of a MDIO transaction. +- enet-phy-lane-swap: If set, indicates the PHY will swap the TX/RX lanes to + compensate for the board being designed with the lanes swapped. + +- eee-broken-100tx: +- eee-broken-1000t: +- eee-broken-10gt: +- eee-broken-1000kx: +- eee-broken-10gkx4: +- eee-broken-10gkr: + Mark the corresponding energy efficient ethernet mode as broken and + request the ethernet to stop advertising it. + Example: ethernet-phy@0 { diff --git a/dts/Bindings/net/smsc-lan91c111.txt b/dts/Bindings/net/smsc-lan91c111.txt index e77e167593..309e37eb7c 100644 --- a/dts/Bindings/net/smsc-lan91c111.txt +++ b/dts/Bindings/net/smsc-lan91c111.txt @@ -13,3 +13,5 @@ Optional properties: 16-bit access only. - power-gpios: GPIO to control the PWRDWN pin - reset-gpios: GPIO to control the RESET pin +- pxa-u16-align4 : Boolean, put in place the workaround the force all + u16 writes to be 32 bits aligned diff --git a/dts/Bindings/net/stmmac.txt b/dts/Bindings/net/stmmac.txt index 41b49e6075..128da752fe 100644 --- a/dts/Bindings/net/stmmac.txt +++ b/dts/Bindings/net/stmmac.txt @@ -1,7 +1,7 @@ * STMicroelectronics 10/100/1000 Ethernet driver (GMAC) Required properties: -- compatible: Should be "snps,dwmac-<ip_version>" "snps,dwmac" +- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac" For backwards compatibility: "st,spear600-gmac" is also supported. - reg: Address and length of the register set for the device - interrupt-parent: Should be the phandle for the interrupt controller @@ -34,7 +34,13 @@ Optional properties: platforms. - tx-fifo-depth: See ethernet.txt file in the same directory - rx-fifo-depth: See ethernet.txt file in the same directory -- snps,pbl Programmable Burst Length +- snps,pbl Programmable Burst Length (tx and rx) +- snps,txpbl Tx Programmable Burst Length. Only for GMAC and newer. + If set, DMA tx will use this value rather than snps,pbl. +- snps,rxpbl Rx Programmable Burst Length. Only for GMAC and newer. + If set, DMA rx will use this value rather than snps,pbl. +- snps,no-pbl-x8 Don't multiply the pbl/txpbl/rxpbl values by 8. + For core rev < 3.50, don't multiply the values by 4. - snps,aal Address-Aligned Beats - snps,fixed-burst Program the DMA to use the fixed burst mode - snps,mixed-burst Program the DMA to use the mixed burst mode @@ -50,6 +56,8 @@ Optional properties: - snps,ps-speed: port selection speed that can be passed to the core when PCS is supported. For example, this is used in case of SGMII and MAC2MAC connection. +- snps,tso: this enables the TSO feature otherwise it will be managed by + MAC HW capability register. Only for GMAC4 and newer. - AXI BUS Mode parameters: below the list of all the parameters to program the AXI register inside the DMA module: - snps,lpi_en: enable Low Power Interface @@ -62,8 +70,6 @@ Optional properties: - snps,fb: fixed-burst - snps,mb: mixed-burst - snps,rb: rebuild INCRx Burst - - snps,tso: this enables the TSO feature otherwise it will be managed by - MAC HW capability register. - mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus. Examples: diff --git a/dts/Bindings/net/ti,dp83867.txt b/dts/Bindings/net/ti,dp83867.txt index 5d21141a68..85bf945b89 100644 --- a/dts/Bindings/net/ti,dp83867.txt +++ b/dts/Bindings/net/ti,dp83867.txt @@ -9,6 +9,18 @@ Required properties: - ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h for applicable values +Optional property: + - ti,min-output-impedance - MAC Interface Impedance control to set + the programmable output impedance to + minimum value (35 ohms). + - ti,max-output-impedance - MAC Interface Impedance control to set + the programmable output impedance to + maximum value (70 ohms). + +Note: ti,min-output-impedance and ti,max-output-impedance are mutually + exclusive. When both properties are present ti,max-output-impedance + takes precedence. + Default child nodes are standard Ethernet PHY device nodes as described in Documentation/devicetree/bindings/net/phy.txt diff --git a/dts/Bindings/net/wireless/marvell-sd8xxx.txt b/dts/Bindings/net/wireless/marvell-8xxx.txt index c421aba0a5..980b16df74 100644 --- a/dts/Bindings/net/wireless/marvell-sd8xxx.txt +++ b/dts/Bindings/net/wireless/marvell-8xxx.txt @@ -1,8 +1,8 @@ -Marvell 8897/8997 (sd8897/sd8997) SDIO devices +Marvell 8897/8997 (sd8897/sd8997/pcie8997) SDIO/PCIE devices ------ -This node provides properties for controlling the marvell sdio wireless device. -The node is expected to be specified as a child node to the SDIO controller that +This node provides properties for controlling the Marvell SDIO/PCIE wireless device. +The node is expected to be specified as a child node to the SDIO/PCIE controller that connects the device to the system. Required properties: @@ -10,6 +10,8 @@ Required properties: - compatible : should be one of the following: * "marvell,sd8897" * "marvell,sd8997" + * "pci11ab,2b42" + * "pci1b4b,2b42" Optional properties: diff --git a/dts/Bindings/net/wireless/qca,ath9k.txt b/dts/Bindings/net/wireless/qca,ath9k.txt new file mode 100644 index 0000000000..b7396c8c27 --- /dev/null +++ b/dts/Bindings/net/wireless/qca,ath9k.txt @@ -0,0 +1,48 @@ +* Qualcomm Atheros ath9k wireless devices + +This node provides properties for configuring the ath9k wireless device. The +node is expected to be specified as a child node of the PCI controller to +which the wireless chip is connected. + +Required properties: +- compatible: For PCI and PCIe devices this should be an identifier following + the format as defined in "PCI Bus Binding to Open Firmware" + Revision 2.1. One of the possible formats is "pciVVVV,DDDD" + where VVVV is the PCI vendor ID and DDDD is PCI device ID. + Typically QCA's PCI vendor ID 168c is used while the PCI device + ID depends on the chipset - see the following (possibly + incomplete) list: + - 0023 for AR5416 + - 0024 for AR5418 + - 0027 for AR9160 + - 0029 for AR9220 and AR9223 + - 002a for AR9280 and AR9283 + - 002b for AR9285 + - 002c for AR2427 + - 002d for AR9227 + - 002e for AR9287 + - 0030 for AR9380, AR9381 and AR9382 + - 0032 for AR9485 + - 0033 for AR9580 and AR9590 + - 0034 for AR9462 + - 0036 for AR9565 + - 0037 for AR9485 +- reg: Address and length of the register set for the device. + +Optional properties: +- qca,no-eeprom: Indicates that there is no physical EEPROM connected to the + ath9k wireless chip (in this case the calibration / + EEPROM data will be loaded from userspace using the + kernel firmware loader). +- mac-address: See ethernet.txt in the parent directory +- local-mac-address: See ethernet.txt in the parent directory + + +In this example, the node is defined as child node of the PCI controller: +&pci0 { + wifi@168c,002d { + compatible = "pci168c,002d"; + reg = <0x7000 0 0 0 0x1000>; + qca,no-eeprom; + }; +}; diff --git a/dts/Bindings/nvmem/brcm,ocotp.txt b/dts/Bindings/nvmem/brcm,ocotp.txt new file mode 100644 index 0000000000..6462e12d8d --- /dev/null +++ b/dts/Bindings/nvmem/brcm,ocotp.txt @@ -0,0 +1,17 @@ +Broadcom OTP memory controller + +Required Properties: +- compatible: "brcm,ocotp" for the first generation Broadcom OTPC which is used + in Cygnus and supports 32 bit read/write. Use "brcm,ocotp-v2" for the second + generation Broadcom OTPC which is used in SoC's such as Stingray and supports + 64-bit read/write. +- reg: Base address of the OTP controller. +- brcm,ocotp-size: Amount of memory available, in 32 bit words + +Example: + +otp: otp@0301c800 { + compatible = "brcm,ocotp"; + reg = <0x0301c800 0x2c>; + brcm,ocotp-size = <2048>; +}; diff --git a/dts/Bindings/nvmem/lpc1850-otp.txt b/dts/Bindings/nvmem/lpc1850-otp.txt new file mode 100644 index 0000000000..853b6a7546 --- /dev/null +++ b/dts/Bindings/nvmem/lpc1850-otp.txt @@ -0,0 +1,20 @@ +* NXP LPC18xx OTP memory + +Internal OTP (One Time Programmable) memory for NXP LPC18xx/43xx devices. + +Required properties: + - compatible: Should be "nxp,lpc1850-otp" + - reg: Must contain an entry with the physical base address and length + for each entry in reg-names. + - address-cells: must be set to 1. + - size-cells: must be set to 1. + +See nvmem.txt for more information. + +Example: + otp: otp@40045000 { + compatible = "nxp,lpc1850-otp"; + reg = <0x40045000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + }; diff --git a/dts/Bindings/opp/opp.txt b/dts/Bindings/opp/opp.txt index ee91cbdd95..9f5ca4457b 100644 --- a/dts/Bindings/opp/opp.txt +++ b/dts/Bindings/opp/opp.txt @@ -86,8 +86,14 @@ Optional properties: Single entry is for target voltage and three entries are for <target min max> voltages. - Entries for multiple regulators must be present in the same order as - regulators are specified in device's DT node. + Entries for multiple regulators shall be provided in the same field separated + by angular brackets <>. The OPP binding doesn't provide any provisions to + relate the values to their power supplies or the order in which the supplies + need to be configured and that is left for the implementation specific + binding. + + Entries for all regulators shall be of the same size, i.e. either all use a + single value or triplets. - opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to the above opp-microvolt property, but allows multiple voltage ranges to be @@ -104,10 +110,13 @@ Optional properties: Should only be set if opp-microvolt is set for the OPP. - Entries for multiple regulators must be present in the same order as - regulators are specified in device's DT node. If this property isn't required - for few regulators, then this should be marked as zero for them. If it isn't - required for any regulator, then this property need not be present. + Entries for multiple regulators shall be provided in the same field separated + by angular brackets <>. If current values aren't required for a regulator, + then it shall be filled with 0. If current values aren't required for any of + the regulators, then this field is not required. The OPP binding doesn't + provide any provisions to relate the values to their power supplies or the + order in which the supplies need to be configured and that is left for the + implementation specific binding. - opp-microamp-<name>: Named opp-microamp property. Similar to opp-microvolt-<name> property, but for microamp instead. @@ -386,10 +395,12 @@ Example 4: Handling multiple regulators / { cpus { cpu@0 { - compatible = "arm,cortex-a7"; + compatible = "vendor,cpu-type"; ... - cpu-supply = <&cpu_supply0>, <&cpu_supply1>, <&cpu_supply2>; + vcc0-supply = <&cpu_supply0>; + vcc1-supply = <&cpu_supply1>; + vcc2-supply = <&cpu_supply2>; operating-points-v2 = <&cpu0_opp_table>; }; }; diff --git a/dts/Bindings/pci/brcm,iproc-pcie.txt b/dts/Bindings/pci/brcm,iproc-pcie.txt index 01b88f4e0d..b8e48b4762 100644 --- a/dts/Bindings/pci/brcm,iproc-pcie.txt +++ b/dts/Bindings/pci/brcm,iproc-pcie.txt @@ -1,10 +1,17 @@ * Broadcom iProc PCIe controller with the platform bus interface Required properties: -- compatible: Must be "brcm,iproc-pcie" for PAXB, or "brcm,iproc-pcie-paxc" - for PAXC. PAXB-based root complex is used for external endpoint devices. - PAXC-based root complex is connected to emulated endpoint devices - internal to the ASIC +- compatible: + "brcm,iproc-pcie" for the first generation of PAXB based controller, +used in SoCs including NSP, Cygnus, NS2, and Pegasus + "brcm,iproc-pcie-paxb-v2" for the second generation of PAXB-based +controllers, used in Stingray + "brcm,iproc-pcie-paxc" for the first generation of PAXC based +controller, used in NS2 + "brcm,iproc-pcie-paxc-v2" for the second generation of PAXC based +controller, used in Stingray + PAXB-based root complex is used for external endpoint devices. PAXC-based +root complex is connected to emulated endpoint devices internal to the ASIC - reg: base address and length of the PCIe controller I/O register space - #interrupt-cells: set to <1> - interrupt-map-mask and interrupt-map, standard PCI properties to define the @@ -19,6 +26,10 @@ Required properties: Optional properties: - phys: phandle of the PCIe PHY device - phy-names: must be "pcie-phy" +- dma-coherent: present if DMA operations are coherent +- dma-ranges: Some PAXB-based root complexes do not have inbound mapping done + by the ASIC after power on reset. In this case, SW is required to configure +the mapping, based on inbound memory regions specified by this property. - brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done by the ASIC after power on reset. In this case, SW needs to configure it @@ -29,11 +40,6 @@ effective: Required: - brcm,pcie-ob-axi-offset: The offset from the AXI address to the internal address used by the iProc PCIe core (not the PCIe address) -- brcm,pcie-ob-window-size: The outbound address mapping window size (in MB) - -Optional: -- brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to -increase the outbound window size MSI support (optional): @@ -41,10 +47,19 @@ For older platforms without MSI integrated in the GIC, iProc PCIe core provides an event queue based MSI support. The iProc MSI uses host memories to store MSI posted writes in the event queues -- msi-parent: Link to the device node of the MSI controller. On newer iProc -platforms, the MSI controller may be gicv2m or gicv3-its. On older iProc -platforms without MSI support in its interrupt controller, one may use the -event queue based MSI support integrated within the iProc PCIe core. +On newer iProc platforms, gicv2m or gicv3-its based MSI support should be used + +- msi-map: Maps a Requester ID to an MSI controller and associated MSI +sideband data + +- msi-parent: Link to the device node of the MSI controller, used when no MSI +sideband data is passed between the iProc PCIe controller and the MSI +controller + +Refer to the following binding documents for more detailed description on +the use of 'msi-map' and 'msi-parent': + Documentation/devicetree/bindings/pci/pci-msi.txt + Documentation/devicetree/bindings/interrupt-controller/msi.txt When the iProc event queue based MSI is used, one needs to define the following properties in the MSI device node: @@ -80,9 +95,7 @@ Example: phy-names = "pcie-phy"; brcm,pcie-ob; - brcm,pcie-ob-oarr-size; brcm,pcie-ob-axi-offset = <0x00000000>; - brcm,pcie-ob-window-size = <256>; msi-parent = <&msi0>; diff --git a/dts/Bindings/pci/layerscape-pci.txt b/dts/Bindings/pci/layerscape-pci.txt index 41e9f55a14..ee1c72d516 100644 --- a/dts/Bindings/pci/layerscape-pci.txt +++ b/dts/Bindings/pci/layerscape-pci.txt @@ -15,6 +15,7 @@ Required properties: - compatible: should contain the platform identifier such as: "fsl,ls1021a-pcie", "snps,dw-pcie" "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie" + "fsl,ls1046a-pcie" - reg: base addresses and lengths of the PCIe controller - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. diff --git a/dts/Bindings/pci/nvidia,tegra20-pcie.txt b/dts/Bindings/pci/nvidia,tegra20-pcie.txt index b8cc395fff..982a74ea6d 100644 --- a/dts/Bindings/pci/nvidia,tegra20-pcie.txt +++ b/dts/Bindings/pci/nvidia,tegra20-pcie.txt @@ -110,6 +110,20 @@ Power supplies for Tegra124: - avdd-pll-erefe-supply: Power supply for PLLE (shared with USB3). Must supply 1.05 V. +Power supplies for Tegra210: +- Required: + - avdd-pll-uerefe-supply: Power supply for PLLE (shared with USB3). Must + supply 1.05 V. + - hvddio-pex-supply: High-voltage supply for PCIe I/O and PCIe output + clocks. Must supply 1.8 V. + - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. + - dvdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must + supply 1.05 V. + - hvdd-pex-pll-e-supply: High-voltage supply for PLLE (shared with USB3). + Must supply 3.3 V. + - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must + supply 1.8 V. + Root ports are defined as subnodes of the PCIe controller node. Required properties: @@ -436,3 +450,99 @@ Board DTS: status = "okay"; }; }; + +Tegra210: +--------- + +SoC DTSI: + + pcie-controller@01003000 { + compatible = "nvidia,tegra210-pcie"; + device_type = "pci"; + reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x01003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x02000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */ + 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */ + 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ + + clocks = <&tegra_car TEGRA210_CLK_PCIE>, + <&tegra_car TEGRA210_CLK_AFI>, + <&tegra_car TEGRA210_CLK_PLL_E>, + <&tegra_car TEGRA210_CLK_CML0>; + clock-names = "pex", "afi", "pll_e", "cml"; + resets = <&tegra_car 70>, + <&tegra_car 72>, + <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <4>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + }; + +Board DTS: + + pcie-controller@01003000 { + status = "okay"; + + avdd-pll-uerefe-supply = <&avdd_1v05_pll>; + hvddio-pex-supply = <&vdd_1v8>; + dvddio-pex-supply = <&vdd_pex_1v05>; + dvdd-pex-pll-supply = <&vdd_pex_1v05>; + hvdd-pex-pll-e-supply = <&vdd_1v8>; + vddio-pex-ctl-supply = <&vdd_1v8>; + + pci@1,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>; + phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3"; + status = "okay"; + }; + + pci@2,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>; + phy-names = "pcie-0"; + status = "okay"; + }; + }; diff --git a/dts/Bindings/pci/pci.txt b/dts/Bindings/pci/pci.txt index 08dcfad09f..50f9e2ca5b 100644 --- a/dts/Bindings/pci/pci.txt +++ b/dts/Bindings/pci/pci.txt @@ -18,3 +18,9 @@ driver implementation may support the following properties: host bridges in the system, otherwise potentially conflicting domain numbers may be assigned to root buses behind different host bridges. The domain number for each host bridge in the system must be unique. +- max-link-speed: + If present this property specifies PCI gen for link capability. Host + drivers could add this as a strategy to avoid unnecessary operation for + unsupported link speed, for instance, trying to do training for + unsupported link speed, etc. Must be '4' for gen4, '3' for gen3, '2' + for gen2, and '1' for gen1. Any other values are invalid. diff --git a/dts/Bindings/pci/qcom,pcie.txt b/dts/Bindings/pci/qcom,pcie.txt index 4059a6f89b..e15f9b1990 100644 --- a/dts/Bindings/pci/qcom,pcie.txt +++ b/dts/Bindings/pci/qcom,pcie.txt @@ -7,6 +7,7 @@ - "qcom,pcie-ipq8064" for ipq8064 - "qcom,pcie-apq8064" for apq8064 - "qcom,pcie-apq8084" for apq8084 + - "qcom,pcie-msm8996" for msm8996 or apq8096 - reg: Usage: required @@ -92,6 +93,17 @@ - "aux" Auxiliary (AUX) clock - "bus_master" Master AXI clock - "bus_slave" Slave AXI clock + +- clock-names: + Usage: required for msm8996/apq8096 + Value type: <stringlist> + Definition: Should contain the following entries + - "pipe" Pipe Clock driving internal logic + - "aux" Auxiliary (AUX) clock + - "cfg" Configuration clock + - "bus_master" Master AXI clock + - "bus_slave" Slave AXI clock + - resets: Usage: required Value type: <prop-encoded-array> @@ -115,7 +127,7 @@ - "core" Core reset - power-domains: - Usage: required for apq8084 + Usage: required for apq8084 and msm8996/apq8096 Value type: <prop-encoded-array> Definition: A phandle and power domain specifier pair to the power domain which is responsible for collapsing diff --git a/dts/Bindings/pci/rcar-pci.txt b/dts/Bindings/pci/rcar-pci.txt index 6cf99690ee..eee518db90 100644 --- a/dts/Bindings/pci/rcar-pci.txt +++ b/dts/Bindings/pci/rcar-pci.txt @@ -7,6 +7,7 @@ compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC; "renesas,pcie-r8a7793" for the R8A7793 SoC; "renesas,pcie-r8a7795" for the R8A7795 SoC; "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device. + "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first diff --git a/dts/Bindings/phy/meson-usb2-phy.txt b/dts/Bindings/phy/meson8b-usb2-phy.txt index 9da5ea2341..5fa73b9d20 100644 --- a/dts/Bindings/phy/meson-usb2-phy.txt +++ b/dts/Bindings/phy/meson8b-usb2-phy.txt @@ -1,4 +1,4 @@ -* Amlogic USB2 PHY +* Amlogic Meson8b and GXBB USB2 PHY Required properties: - compatible: Depending on the platform this should be one of: @@ -16,10 +16,10 @@ Optional properties: Example: -usb0_phy: usb_phy@0 { +usb0_phy: usb-phy@c0000000 { compatible = "amlogic,meson-gxbb-usb2-phy"; #phy-cells = <0>; - reg = <0x0 0x0 0x0 0x20>; + reg = <0x0 0xc0000000 0x0 0x20>; resets = <&reset RESET_USB_OTG>; clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; clock-names = "usb_general", "usb"; diff --git a/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt index 1685821eea..de1378b4ef 100644 --- a/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/dts/Bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -28,6 +28,20 @@ Required properties: - reg: Should contain the register physical address and length for the pin controller. +- clocks: phandle to the clocks feeding the pin controller: + - "apb": the gated APB parent clock + - "hosc": the high frequency oscillator in the system + - "losc": the low frequency oscillator in the system + +Note: For backward compatibility reasons, the hosc and losc clocks are only +required if you need to use the optional input-debounce property. Any new +device tree should set them. + +Optional properties: + - input-debounce: Array of debouncing periods in microseconds. One period per + irq bank found in the controller. 0 if no setup required. + + Please refer to pinctrl-bindings.txt in this directory for details of the common pinctrl bindings used by client devices. @@ -37,6 +51,22 @@ pins it needs, and how they should be configured, with regard to muxer configuration, drive strength and pullups. If one of these options is not set, its actual value will be unspecified. +This driver supports the generic pin multiplexing and configuration +bindings. For details on each properties, you can refer to +./pinctrl-bindings.txt. + +Required sub-node properties: + - pins + - function + +Optional sub-node properties: + - bias-disable + - bias-pull-up + - bias-pull-down + - drive-strength + +*** Deprecated pin configuration and multiplexing binding + Required subnode-properties: - allwinner,pins: List of strings containing the pin name. diff --git a/dts/Bindings/pinctrl/atmel,at91-pinctrl.txt b/dts/Bindings/pinctrl/atmel,at91-pinctrl.txt index b7a93e80a3..9a8a45d9d8 100644 --- a/dts/Bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/dts/Bindings/pinctrl/atmel,at91-pinctrl.txt @@ -98,6 +98,8 @@ DRIVE_STRENGTH (3 << 5): indicate the drive strength of the pin using the 01 - Low 10 - Medium 11 - High +OUTPUT (1 << 7): indicate this pin need to be configured as an output. +OUTPUT_VAL (1 << 8): output val (1 = high, 0 = low) DEBOUNCE (1 << 16): indicate this pin needs debounce. DEBOUNCE_VAL (0x3fff << 17): debounce value. diff --git a/dts/Bindings/pinctrl/meson,pinctrl.txt b/dts/Bindings/pinctrl/meson,pinctrl.txt index fe7fe0b03c..2392557ede 100644 --- a/dts/Bindings/pinctrl/meson,pinctrl.txt +++ b/dts/Bindings/pinctrl/meson,pinctrl.txt @@ -7,6 +7,8 @@ Required properties for the root node: "amlogic,meson8b-aobus-pinctrl" "amlogic,meson-gxbb-periphs-pinctrl" "amlogic,meson-gxbb-aobus-pinctrl" + "amlogic,meson-gxl-periphs-pinctrl" + "amlogic,meson-gxl-aobus-pinctrl" - reg: address and size of registers controlling irq functionality === GPIO sub-nodes === diff --git a/dts/Bindings/pinctrl/oxnas,pinctrl.txt b/dts/Bindings/pinctrl/oxnas,pinctrl.txt index d6074321f7..09e81a95bb 100644 --- a/dts/Bindings/pinctrl/oxnas,pinctrl.txt +++ b/dts/Bindings/pinctrl/oxnas,pinctrl.txt @@ -9,7 +9,7 @@ used for a specific device or function. This node represents configurations of pins, optional function, and optional mux related configuration. Required properties for pin controller node: - - compatible: "oxsemi,ox810se-pinctrl" + - compatible: "oxsemi,ox810se-pinctrl" or "oxsemi,ox820-pinctrl" - oxsemi,sys-ctrl: a phandle to the system controller syscon node Required properties for pin configuration sub-nodes: diff --git a/dts/Bindings/pinctrl/pinctrl-bindings.txt b/dts/Bindings/pinctrl/pinctrl-bindings.txt index b73c96d24f..bf3f7b0147 100644 --- a/dts/Bindings/pinctrl/pinctrl-bindings.txt +++ b/dts/Bindings/pinctrl/pinctrl-bindings.txt @@ -97,6 +97,11 @@ For example: }; == Pin controller devices == +Required properties: See the pin controller driver specific documentation + +Optional properties: +#pinctrl-cells: Number of pin control cells in addition to the index within the + pin controller device instance Pin controller devices should contain the pin configuration nodes that client devices reference. @@ -119,7 +124,8 @@ For example: The contents of each of those pin configuration child nodes is defined entirely by the binding for the individual pin controller device. There -exists no common standard for this content. +exists no common standard for this content. The pinctrl framework only +provides generic helper bindings that the pin controller driver can use. The pin configuration nodes need not be direct children of the pin controller device; they may be grandchildren, for example. Whether this is legal, and @@ -156,6 +162,42 @@ state_2_node_a { pins = "mfio29", "mfio30"; }; +Optionally an altenative binding can be used if more suitable depending on the +pin controller hardware. For hardaware where there is a large number of identical +pin controller instances, naming each pin and function can easily become +unmaintainable. This is especially the case if the same controller is used for +different pins and functions depending on the SoC revision and packaging. + +For cases like this, the pin controller driver may use pinctrl-pin-array helper +binding with a hardware based index and a number of pin configuration values: + +pincontroller { + ... /* Standard DT properties for the device itself elided */ + #pinctrl-cells = <2>; + + state_0_node_a { + pinctrl-pin-array = < + 0 A_DELAY_PS(0) G_DELAY_PS(120) + 4 A_DELAY_PS(0) G_DELAY_PS(360) + ... + >; + }; + ... +}; + +Above #pinctrl-cells specifies the number of value cells in addition to the +index of the registers. This is similar to the interrupts-extended binding with +one exception. There is no need to specify the phandle for each entry as that +is already known as the defined pins are always children of the pin controller +node. Further having the phandle pointing to another pin controller would not +currently work as the pinctrl framework uses named modes to group pins for each +pin control device. + +The index for pinctrl-pin-array must relate to the hardware for the pinctrl +registers, and must not be a virtual index of pin instances. The reason for +this is to avoid mapping of the index in the dts files and the pin controller +driver as it can change. + == Generic pin configuration node content == Many data items that are represented in a pin configuration node are common diff --git a/dts/Bindings/pinctrl/pinctrl-palmas.txt b/dts/Bindings/pinctrl/pinctrl-palmas.txt index caf297bee1..c28d4eb83b 100644 --- a/dts/Bindings/pinctrl/pinctrl-palmas.txt +++ b/dts/Bindings/pinctrl/pinctrl-palmas.txt @@ -35,6 +35,15 @@ Optional properties: - ti,palmas-enable-dvfs2: Enable DVFS2. Configure pins for DVFS2 mode. Selection primary or secondary function associated to GPADC_START and SYSEN2 pin/pad for DVFS2 interface +- ti,palmas-override-powerhold: This is applicable for PMICs for which + GPIO7 is configured in POWERHOLD mode which has higher priority + over DEV_ON bit and keeps the PMIC supplies on even after the DEV_ON + bit is turned off. This property enables driver to over ride the + POWERHOLD value to GPIO7 so as to turn off the PMIC in power off + scenarios. So for GPIO7 if ti,palmas-override-powerhold is set + then the GPIO_7 field should never be muxed to anything else. + It should be set to POWERHOLD by default and only in case of + power off scenarios the driver will over ride the mux value. This binding uses the following generic properties as defined in pinctrl-bindings.txt: diff --git a/dts/Bindings/pinctrl/pinctrl-single.txt b/dts/Bindings/pinctrl/pinctrl-single.txt index 66dcaa9efd..e705acd361 100644 --- a/dts/Bindings/pinctrl/pinctrl-single.txt +++ b/dts/Bindings/pinctrl/pinctrl-single.txt @@ -7,6 +7,9 @@ Required properties: - reg : offset and length of the register set for the mux registers +- #pinctrl-cells : number of cells in addition to the index, set to 1 + for pinctrl-single,pins and 2 for pinctrl-single,bits + - pinctrl-single,register-width : pinmux register access width in bits - pinctrl-single,function-mask : mask of allowed pinmux function bits diff --git a/dts/Bindings/pinctrl/pinctrl-sx150x.txt b/dts/Bindings/pinctrl/pinctrl-sx150x.txt new file mode 100644 index 0000000000..bf76867168 --- /dev/null +++ b/dts/Bindings/pinctrl/pinctrl-sx150x.txt @@ -0,0 +1,74 @@ +SEMTECH SX150x GPIO expander bindings + +Please refer to pinctrl-bindings.txt, ../gpio/gpio.txt, and +../interrupt-controller/interrupts.txt for generic information regarding +pin controller, GPIO, and interrupt bindings. + +Required properties: +- compatible: should be one of : + "semtech,sx1501q", + "semtech,sx1502q", + "semtech,sx1503q", + "semtech,sx1504q", + "semtech,sx1505q", + "semtech,sx1506q", + "semtech,sx1507q", + "semtech,sx1508q", + "semtech,sx1509q". + +- reg: The I2C slave address for this device. + +- #gpio-cells: Should be 2. The first cell is the GPIO number and the + second cell is used to specify optional parameters: + bit 0: polarity (0: normal, 1: inverted) + +- gpio-controller: Marks the device as a GPIO controller. + +Optional properties : +- interrupt-parent: phandle of the parent interrupt controller. + +- interrupts: Interrupt specifier for the controllers interrupt. + +- interrupt-controller: Marks the device as a interrupt controller. + +- semtech,probe-reset: Will trigger a reset of the GPIO expander on probe, + only for sx1507q, sx1508q and sx1509q + +The GPIO expander can optionally be used as an interrupt controller, in +which case it uses the default two cell specifier. + +Required properties for pin configuration sub-nodes: + - pins: List of pins to which the configuration applies. + +Optional properties for pin configuration sub-nodes: +---------------------------------------------------- + - bias-disable: disable any pin bias, except the OSCIO pin + - bias-pull-up: pull up the pin, except the OSCIO pin + - bias-pull-down: pull down the pin, except the OSCIO pin + - bias-pull-pin-default: use pin-default pull state, except the OSCIO pin + - drive-push-pull: drive actively high and low + - drive-open-drain: drive with open drain only for sx1507q, sx1508q and sx1509q and except the OSCIO pin + - output-low: set the pin to output mode with low level + - output-high: set the pin to output mode with high level + +Example: + + i2c0gpio-expander@20{ + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1506q"; + reg = <0x20>; + interrupt-parent = <&gpio_1>; + interrupts = <16 0>; + + gpio-controller; + interrupt-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_cfg_pins>; + + gpio1_cfg_pins: gpio1-cfg { + pins = "gpio1"; + bias-pull-up; + }; + }; diff --git a/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.txt b/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.txt new file mode 100644 index 0000000000..13cd629f89 --- /dev/null +++ b/dts/Bindings/pinctrl/qcom,msm8994-pinctrl.txt @@ -0,0 +1,177 @@ +Qualcomm MSM8994 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +MSM8994 platform. + +- compatible: + Usage: required + Value type: <string> + Definition: Should contain one of: + "qcom,msm8992-pinctrl", + "qcom,msm8994-pinctrl". + +- reg: + Usage: required + Value type: <prop-encoded-array> + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: <prop-encoded-array> + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: <none> + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/interrupt-controller/irq.h> + +- gpio-controller: + Usage: required + Value type: <none> + Definition: identifies this node as a gpio controller + +- #gpio-cells: + Usage: required + Value type: <u32> + Definition: must be 2. Specifying the pin number and flags, as defined + in <dt-bindings/gpio/gpio.h> + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: <string-array> + Definition: List of gpio pins affected by the properties specified in + this subnode. + + Valid pins are: + gpio0-gpio145 + Supports mux, bias and drive-strength + + sdc1_clk, sdc1_cmd, sdc1_data sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data + Supports bias and drive-strength + +- function: + Usage: required + Value type: <string> + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + + audio_ref_clk, blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, + blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_i2c9, blsp_i2c10, blsp_i2c11, + blsp_i2c12, blsp_spi1, blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, + blsp_spi2, blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, + blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, blsp_spi8, blsp_spi9, + blsp_spi10, blsp_spi10_cs1, blsp_spi10_cs2, blsp_spi10_cs3, blsp_spi11, + blsp_spi12, blsp_uart1, blsp_uart2, blsp_uart3, blsp_uart4, blsp_uart5, + blsp_uart6, blsp_uart7, blsp_uart8, blsp_uart9, blsp_uart10, blsp_uart11, + blsp_uart12, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim4, blsp_uim5, + blsp_uim6, blsp_uim7, blsp_uim8, blsp_uim9, blsp_uim10, blsp_uim11, + blsp_uim12, blsp11_i2c_scl_b, blsp11_i2c_sda_b, blsp11_uart_rx_b, + blsp11_uart_tx_b, cam_mclk0, cam_mclk1, cam_mclk2, cam_mclk3, + cci_async_in0, cci_async_in1, cci_async_in2, cci_i2c0, cci_i2c1, + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, + gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, gcc_gp3_clk_a, + gcc_gp3_clk_b, gp_mn, gp_pdm0, gp_pdm1, gp_pdm2, gp0_clk, + gp1_clk, gps_tx, gsm_tx, hdmi_cec, hdmi_ddc, hdmi_hpd, hdmi_rcv, + mdp_vsync, mss_lte, nav_pps, nav_tsync, qdss_cti_trig_in_a, + qdss_cti_trig_in_b, qdss_cti_trig_in_c, qdss_cti_trig_in_d, + qdss_cti_trig_out_a, qdss_cti_trig_out_b, qdss_cti_trig_out_c, + qdss_cti_trig_out_d, qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, + qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, qua_mi2s, pci_e0, + pci_e1, pri_mi2s, sdc4, sec_mi2s, slimbus, spkr_i2s, ter_mi2s, tsif1, + tsif2, uim_batt_alarm, uim1, uim2, uim3, uim4, gpio + +- bias-disable: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: <none> + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: <none> + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: <u32> + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8994-pinctrl"; + reg = <0xfd510000 0x4000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_uart2_default: blsp1_uart2_default { + pinmux { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; + }; + }; diff --git a/dts/Bindings/pinctrl/rockchip,pinctrl.txt b/dts/Bindings/pinctrl/rockchip,pinctrl.txt index c68b955456..4722bc61a1 100644 --- a/dts/Bindings/pinctrl/rockchip,pinctrl.txt +++ b/dts/Bindings/pinctrl/rockchip,pinctrl.txt @@ -19,10 +19,11 @@ The pins are grouped into up to 5 individual pin banks which need to be defined as gpio sub-nodes of the pinmux controller. Required properties for iomux controller: - - compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl" - "rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl" - "rockchip,rk3228-pinctrl", "rockchip,rk3288-pinctrl" - "rockchip,rk3368-pinctrl", "rockchip,rk3399-pinctrl" + - compatible: one of "rockchip,rk1108-pinctrl", "rockchip,rk2928-pinctrl" + "rockchip,rk3066a-pinctrl", "rockchip,rk3066b-pinctrl" + "rockchip,rk3188-pinctrl", "rockchip,rk3228-pinctrl" + "rockchip,rk3288-pinctrl", "rockchip,rk3368-pinctrl" + "rockchip,rk3399-pinctrl" - rockchip,grf: phandle referencing a syscon providing the "general register files" diff --git a/dts/Bindings/pinctrl/samsung-pinctrl.txt b/dts/Bindings/pinctrl/samsung-pinctrl.txt index d49e22d2a8..1baf19eeca 100644 --- a/dts/Bindings/pinctrl/samsung-pinctrl.txt +++ b/dts/Bindings/pinctrl/samsung-pinctrl.txt @@ -19,11 +19,30 @@ Required Properties: - "samsung,exynos5260-pinctrl": for Exynos5260 compatible pin-controller. - "samsung,exynos5410-pinctrl": for Exynos5410 compatible pin-controller. - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller. + - "samsung,exynos5433-pinctrl": for Exynos5433 compatible pin-controller. - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller. - reg: Base address of the pin controller hardware module and length of the address space it occupies. + - reg: Second base address of the pin controller if the specific registers + of the pin controller are separated into the different base address. + + Eg: GPF[1-5] of Exynos5433 are separated into the two base address. + - First base address is for GPAx and GPF[1-5] external interrupt + registers. + - Second base address is for GPF[1-5] pinctrl registers. + + pinctrl_0: pinctrl@10580000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x10580000 0x1a20>, <0x11090000 0x100>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos7-wakeup-eint"; + interrupts = <0 16 0>; + }; + }; + - Pin banks as child nodes: Pin banks of the controller are represented by child nodes of the controller node. Bank name is taken from name of the node. Each bank node must contain following properties: diff --git a/dts/Bindings/pinctrl/ti,da850-pupd.txt b/dts/Bindings/pinctrl/ti,da850-pupd.txt new file mode 100644 index 0000000000..7f2980567c --- /dev/null +++ b/dts/Bindings/pinctrl/ti,da850-pupd.txt @@ -0,0 +1,55 @@ +* Pin configuration for TI DA850/OMAP-L138/AM18x + +These SoCs have a separate controller for setting bias (internal pullup/down). +Bias can only be selected for groups rather than individual pins. + +Required Properties: + + - compatible: Must be "ti,da850-pupd" + - reg: Base address and length of the memory resource used by the pullup/down + controller hardware module. + +The controller node also acts as a container for pin group configuration nodes. +The names of these groups are ignored. + +Pin Group Node Properties: + +- groups: An array of strings, each string containing the name of a pin group. + Valid names are "cp0".."cp31". + +The pin configuration parameters use the generic pinconf bindings defined in +pinctrl-bindings.txt in this directory. The supported parameters are +bias-disable, bias-pull-up, bias-pull-down. + + +Example +------- + +In common dtsi file: + + pinconf: pin-controller@22c00c { + compatible = "ti,da850-pupd"; + reg = <0x22c00c 0x8>; + }; + +In board-specific file: + + &pinconf { + pinctrl-0 = <&pinconf_bias_groups>; + pinctrl-names = "default"; + + pinconf_bias_groups: bias-groups { + pull-up { + groups = "cp30", "cp31"; + bias-pull-up; + }; + pull-down { + groups = "cp29", "cp28"; + bias-pull-down; + }; + disable { + groups = "cp27", "cp26"; + bias-disable; + }; + }; + }; diff --git a/dts/Bindings/power/domain-idle-state.txt b/dts/Bindings/power/domain-idle-state.txt new file mode 100644 index 0000000000..eefc7ed22c --- /dev/null +++ b/dts/Bindings/power/domain-idle-state.txt @@ -0,0 +1,33 @@ +PM Domain Idle State Node: + +A domain idle state node represents the state parameters that will be used to +select the state when there are no active components in the domain. + +The state node has the following parameters - + +- compatible: + Usage: Required + Value type: <string> + Definition: Must be "domain-idle-state". + +- entry-latency-us + Usage: Required + Value type: <prop-encoded-array> + Definition: u32 value representing worst case latency in + microseconds required to enter the idle state. + The exit-latency-us duration may be guaranteed + only after entry-latency-us has passed. + +- exit-latency-us + Usage: Required + Value type: <prop-encoded-array> + Definition: u32 value representing worst case latency + in microseconds required to exit the idle state. + +- min-residency-us + Usage: Required + Value type: <prop-encoded-array> + Definition: u32 value representing minimum residency duration + in microseconds after which the idle state will yield + power benefits after overcoming the overhead in entering +i the idle state. diff --git a/dts/Bindings/power/power_domain.txt b/dts/Bindings/power/power_domain.txt index 025b5e7df6..723e1ad937 100644 --- a/dts/Bindings/power/power_domain.txt +++ b/dts/Bindings/power/power_domain.txt @@ -29,6 +29,15 @@ Optional properties: specified by this binding. More details about power domain specifier are available in the next section. +- domain-idle-states : A phandle of an idle-state that shall be soaked into a + generic domain power state. The idle state definitions are + compatible with domain-idle-state specified in [1]. + The domain-idle-state property reflects the idle state of this PM domain and + not the idle states of the devices or sub-domains in the PM domain. Devices + and sub-domains have their own idle-states independent of the parent + domain's idle states. In the absence of this property, the domain would be + considered as capable of being powered-on or powered-off. + Example: power: power-controller@12340000 { @@ -59,6 +68,38 @@ The nodes above define two power controllers: 'parent' and 'child'. Domains created by the 'child' power controller are subdomains of '0' power domain provided by the 'parent' power controller. +Example 3: + parent: power-controller@12340000 { + compatible = "foo,power-controller"; + reg = <0x12340000 0x1000>; + #power-domain-cells = <0>; + domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>; + }; + + child: power-controller@12341000 { + compatible = "foo,power-controller"; + reg = <0x12341000 0x1000>; + power-domains = <&parent 0>; + #power-domain-cells = <0>; + domain-idle-states = <&DOMAIN_PWR_DN>; + }; + + DOMAIN_RET: state@0 { + compatible = "domain-idle-state"; + reg = <0x0>; + entry-latency-us = <1000>; + exit-latency-us = <2000>; + min-residency-us = <10000>; + }; + + DOMAIN_PWR_DN: state@1 { + compatible = "domain-idle-state"; + reg = <0x1>; + entry-latency-us = <5000>; + exit-latency-us = <8000>; + min-residency-us = <7000>; + }; + ==PM domain consumers== Required properties: @@ -76,3 +117,5 @@ Example: The node above defines a typical PM domain consumer device, which is located inside a PM domain with index 0 of a power controller represented by a node with the label "power". + +[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt diff --git a/dts/Bindings/power/renesas,rcar-sysc.txt b/dts/Bindings/power/renesas,rcar-sysc.txt index 0725fb37a9..d91715bc8d 100644 --- a/dts/Bindings/power/renesas,rcar-sysc.txt +++ b/dts/Bindings/power/renesas,rcar-sysc.txt @@ -1,12 +1,14 @@ -DT bindings for the Renesas R-Car System Controller +DT bindings for the Renesas R-Car (RZ/G) System Controller == System Controller Node == -The R-Car System Controller provides power management for the CPU cores and -various coprocessors. +The R-Car (RZ/G) System Controller provides power management for the CPU cores +and various coprocessors. Required properties: - compatible: Must contain exactly one of the following: + - "renesas,r8a7743-sysc" (RZ/G1M) + - "renesas,r8a7745-sysc" (RZ/G1E) - "renesas,r8a7779-sysc" (R-Car H1) - "renesas,r8a7790-sysc" (R-Car H2) - "renesas,r8a7791-sysc" (R-Car M2-W) diff --git a/dts/Bindings/pwm/pwm-bcm2835.txt b/dts/Bindings/pwm/pwm-bcm2835.txt index fb6fb31bc4..cf573e85b1 100644 --- a/dts/Bindings/pwm/pwm-bcm2835.txt +++ b/dts/Bindings/pwm/pwm-bcm2835.txt @@ -3,7 +3,7 @@ BCM2835 PWM controller (Raspberry Pi controller) Required properties: - compatible: should be "brcm,bcm2835-pwm" - reg: physical base address and length of the controller's registers -- clock: This clock defines the base clock frequency of the PWM hardware +- clocks: This clock defines the base clock frequency of the PWM hardware system, the period and the duty_cycle of the PWM signal is a multiple of the base period. - #pwm-cells: Should be 2. See pwm.txt in this directory for a description of diff --git a/dts/Bindings/pwm/pwm-hibvt.txt b/dts/Bindings/pwm/pwm-hibvt.txt new file mode 100644 index 0000000000..fa7849d678 --- /dev/null +++ b/dts/Bindings/pwm/pwm-hibvt.txt @@ -0,0 +1,21 @@ +Hisilicon PWM controller + +Required properties: +-compatible: should contain one SoC specific compatible string + The SoC specific strings supported including: + "hisilicon,hi3516cv300-pwm" + "hisilicon,hi3519v100-pwm" +- reg: physical base address and length of the controller's registers. +- clocks: phandle and clock specifier of the PWM reference clock. +- resets: phandle and reset specifier for the PWM controller reset. +- #pwm-cells: Should be 3. See pwm.txt in this directory for a description of + the cells format. + +Example: + pwm: pwm@12130000 { + compatible = "hisilicon,hi3516cv300-pwm"; + reg = <0x12130000 0x10000>; + clocks = <&crg_ctrl HI3516CV300_PWM_CLK>; + resets = <&crg_ctrl 0x38 0>; + #pwm-cells = <3>; + }; diff --git a/dts/Bindings/regulator/pwm-regulator.txt b/dts/Bindings/regulator/pwm-regulator.txt index 3aeba9f86e..bf85aa9ad6 100644 --- a/dts/Bindings/regulator/pwm-regulator.txt +++ b/dts/Bindings/regulator/pwm-regulator.txt @@ -59,7 +59,7 @@ Any property defined as part of the core regulator binding can also be used. Continuous Voltage With Enable GPIO Example: pwm_regulator { - compatible = "pwm-regulator; + compatible = "pwm-regulator"; pwms = <&pwm1 0 8448 0>; enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>; regulator-min-microvolt = <1016000>; @@ -76,7 +76,7 @@ Continuous Voltage With Enable GPIO Example: Voltage Table Example: pwm_regulator { - compatible = "pwm-regulator; + compatible = "pwm-regulator"; pwms = <&pwm1 0 8448 0>; regulator-min-microvolt = <1016000>; regulator-max-microvolt = <1114000>; diff --git a/dts/Bindings/regulator/tps65218.txt b/dts/Bindings/regulator/tps65218.txt index fccc1d24af..02f0e9bbfb 100644 --- a/dts/Bindings/regulator/tps65218.txt +++ b/dts/Bindings/regulator/tps65218.txt @@ -1,23 +1,78 @@ TPS65218 family of regulators Required properties: -For tps65218 regulators/LDOs -- compatible: - - "ti,tps65218-dcdc1" for DCDC1 - - "ti,tps65218-dcdc2" for DCDC2 - - "ti,tps65218-dcdc3" for DCDC3 - - "ti,tps65218-dcdc4" for DCDC4 - - "ti,tps65218-dcdc5" for DCDC5 - - "ti,tps65218-dcdc6" for DCDC6 - - "ti,tps65218-ldo1" for LDO1 - -Optional properties: -- Any optional property defined in bindings/regulator/regulator.txt +- compatible: "ti,tps65218" +- reg: I2C slave address + +- List of regulators provided by this controller, must be named + after their hardware counterparts: dcdc[1-6] and ldo1 +- This is the list of child nodes that specify the regulator + initialization data for defined regulators. Not all regulators for the given + device need to be present. The definition for each of these nodes is defined + using the standard binding for regulators found at ./regulator.txt. + + The valid names for regulators are: + tps65217: regulator-dcdc1, regulator-dcdc2, regulator-dcdc3, regulator-dcdc4, + regulator-dcdc5, regulator-dcdc6, regulator-ldo1, regulator-ls3. + Each regulator is defined using the standard binding for regulators. Example: +tps65218: tps65218@24 { + reg = <0x24>; + compatible = "ti,tps65218"; + interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */ + interrupt-controller; + #interrupt-cells = <2>; + + dcdc1: regulator-dcdc1 { + regulator-name = "vdd_core"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2: regulator-dcdc2 { + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3: regulator-dcdc3 { + regulator-name = "vdcdc3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc5: regulator-dcdc5 { + regulator-name = "v1_0bat"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc6: regulator-dcdc6 { + regulator-name = "v1_8bat"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: regulator-ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; - xyz: regulator@0 { - compatible = "ti,tps65218-dcdc1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; + ls3: regulator-ls3 { + regulator-min-microvolt = <100000>; + regulator-max-microvolt = <1000000>; }; +}; diff --git a/dts/Bindings/remoteproc/qcom,adsp.txt b/dts/Bindings/remoteproc/qcom,adsp.txt new file mode 100644 index 0000000000..b85885a298 --- /dev/null +++ b/dts/Bindings/remoteproc/qcom,adsp.txt @@ -0,0 +1,98 @@ +Qualcomm ADSP Peripheral Image Loader + +This document defines the binding for a component that loads and boots firmware +on the Qualcomm ADSP Hexagon core. + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,msm8974-adsp-pil" + "qcom,msm8996-adsp-pil" + +- interrupts-extended: + Usage: required + Value type: <prop-encoded-array> + Definition: must list the watchdog, fatal IRQs ready, handover and + stop-ack IRQs + +- interrupt-names: + Usage: required + Value type: <stringlist> + Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack" + +- clocks: + Usage: required + Value type: <prop-encoded-array> + Definition: reference to the xo clock to be held on behalf of the + booting Hexagon core + +- clock-names: + Usage: required + Value type: <stringlist> + Definition: must be "xo" + +- cx-supply: + Usage: required + Value type: <phandle> + Definition: reference to the regulator to be held on behalf of the + booting Hexagon core + +- memory-region: + Usage: required + Value type: <phandle> + Definition: reference to the reserved-memory for the ADSP + +- qcom,smem-states: + Usage: required + Value type: <phandle> + Definition: reference to the smem state for requesting the ADSP to + shut down + +- qcom,smem-state-names: + Usage: required + Value type: <stringlist> + Definition: must be "stop" + + += SUBNODES +The adsp node may have an subnode named "smd-edge" that describes the SMD edge, +channels and devices related to the ADSP. See ../soc/qcom/qcom,smd.txt for +details on how to describe the SMD edge. + + += EXAMPLE +The following example describes the resources needed to boot control the +ADSP, as it is found on MSM8974 boards. + + adsp { + compatible = "qcom,msm8974-adsp-pil"; + + interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmcc RPM_CXO_CLK>; + clock-names = "xo"; + + cx-supply = <&pm8841_s2>; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + smd-edge { + interrupts = <0 156 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 8 8>; + qcom,smd-edge = <1>; + }; + }; diff --git a/dts/Bindings/remoteproc/qcom,wcnss-pil.txt b/dts/Bindings/remoteproc/qcom,wcnss-pil.txt index 0d2361ebe3..d420f84ddf 100644 --- a/dts/Bindings/remoteproc/qcom,wcnss-pil.txt +++ b/dts/Bindings/remoteproc/qcom,wcnss-pil.txt @@ -60,8 +60,8 @@ on the Qualcomm WCNSS core. see ../reserved-memory/reserved-memory.txt = SUBNODES -A single subnode of the WCNSS PIL describes the attached rf module and its -resource dependencies. +A required subnode of the WCNSS PIL is used to describe the attached rf module +and its resource dependencies. It is described by the following properties: - compatible: Usage: required @@ -90,6 +90,11 @@ resource dependencies. Definition: reference to the regulators to be held on behalf of the booting of the WCNSS core + +The wcnss node can also have an subnode named "smd-edge" that describes the SMD +edge, channels and devices related to the WCNSS. +See ../soc/qcom/qcom,smd.txt for details on how to describe the SMD edge. + = EXAMPLE The following example describes the resources needed to boot control the WCNSS, with attached WCN3680, as it is commonly found on MSM8974 boards. @@ -129,4 +134,25 @@ pronto@fb204000 { vddpa-supply = <&pm8941_l19>; vdddig-supply = <&pm8941_s3>; }; + + smd-edge { + interrupts = <0 142 1>; + + qcom,ipc = <&apcs 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&pronto>; + + bt { + compatible = "qcom,wcnss-bt"; + }; + }; + }; }; diff --git a/dts/Bindings/reserved-memory/ramoops.txt b/dts/Bindings/reserved-memory/ramoops.txt index e81f821a21..0eba562fe5 100644 --- a/dts/Bindings/reserved-memory/ramoops.txt +++ b/dts/Bindings/reserved-memory/ramoops.txt @@ -46,3 +46,6 @@ Optional properties: (defaults to buffered mappings) - no-dump-oops: if present, only dump panics (defaults to panics and oops) + +- flags: if present, pass ramoops behavioral flags (defaults to 0, + see include/linux/pstore_ram.h RAMOOPS_FLAG_* for flag values). diff --git a/dts/Bindings/reset/oxnas,reset.txt b/dts/Bindings/reset/oxnas,reset.txt index 6f06db9300..d27ccb5d04 100644 --- a/dts/Bindings/reset/oxnas,reset.txt +++ b/dts/Bindings/reset/oxnas,reset.txt @@ -5,45 +5,19 @@ Please also refer to reset.txt in this directory for common reset controller binding usage. Required properties: -- compatible: Should be "oxsemi,ox810se-reset" +- compatible: For OX810SE, should be "oxsemi,ox810se-reset" + For OX820, should be "oxsemi,ox820-reset" - #reset-cells: 1, see below Parent node should have the following properties : -- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" +- compatible: For OX810SE, should be : + "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" + For OX820, should be : + "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd" -For OX810SE, the indices are : - - 0 : ARM - - 1 : COPRO - - 2 : Reserved - - 3 : Reserved - - 4 : USBHS - - 5 : USBHSPHY - - 6 : MAC - - 7 : PCI - - 8 : DMA - - 9 : DPE - - 10 : DDR - - 11 : SATA - - 12 : SATA_LINK - - 13 : SATA_PHY - - 14 : Reserved - - 15 : NAND - - 16 : GPIO - - 17 : UART1 - - 18 : UART2 - - 19 : MISC - - 20 : I2S - - 21 : AHB_MON - - 22 : UART3 - - 23 : UART4 - - 24 : SGDMA - - 25 : Reserved - - 26 : Reserved - - 27 : Reserved - - 28 : Reserved - - 29 : Reserved - - 30 : Reserved - - 31 : BUS +Reset indices are in dt-bindings include files : +- For OX810SE: include/dt-bindings/reset/oxsemi,ox810se.h +- For OX820: include/dt-bindings/reset/oxsemi,ox820.h example: diff --git a/dts/Bindings/reset/renesas,rst.txt b/dts/Bindings/reset/renesas,rst.txt new file mode 100644 index 0000000000..fe5e0f37b3 --- /dev/null +++ b/dts/Bindings/reset/renesas,rst.txt @@ -0,0 +1,37 @@ +DT bindings for the Renesas R-Car and RZ/G Reset Controllers + +The R-Car and RZ/G Reset Controllers provide reset control, and implement the +following functions: + - Latching of the levels on mode pins when PRESET# is negated, + - Mode monitoring register, + - Reset control of peripheral devices (on R-Car Gen1), + - Watchdog timer (on R-Car Gen1), + - Register-based reset control and boot address registers for the various CPU + cores (on R-Car Gen2 and Gen3, and on RZ/G). + + +Required properties: + - compatible: Should be + - "renesas,<soctype>-reset-wdt" for R-Car Gen1, + - "renesas,<soctype>-rst" for R-Car Gen2 and Gen3, and RZ/G + Examples with soctypes are: + - "renesas,r8a7743-rst" (RZ/G1M) + - "renesas,r8a7745-rst" (RZ/G1E) + - "renesas,r8a7778-reset-wdt" (R-Car M1A) + - "renesas,r8a7779-reset-wdt" (R-Car H1) + - "renesas,r8a7790-rst" (R-Car H2) + - "renesas,r8a7791-rst" (R-Car M2-W) + - "renesas,r8a7792-rst" (R-Car V2H + - "renesas,r8a7793-rst" (R-Car M2-N) + - "renesas,r8a7794-rst" (R-Car E2) + - "renesas,r8a7795-rst" (R-Car H3) + - "renesas,r8a7796-rst" (R-Car M3-W) + - reg: Address start and address range for the device. + + +Example: + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7795-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; diff --git a/dts/Bindings/reset/st,sti-powerdown.txt b/dts/Bindings/reset/st,sti-powerdown.txt index 1cfd21d1df..92527138bc 100644 --- a/dts/Bindings/reset/st,sti-powerdown.txt +++ b/dts/Bindings/reset/st,sti-powerdown.txt @@ -16,15 +16,14 @@ Please refer to reset.txt in this directory for common reset controller binding usage. Required properties: -- compatible: Should be "st,<chip>-powerdown" - ex: "st,stih415-powerdown", "st,stih416-powerdown" +- compatible: Should be "st,stih407-powerdown" - #reset-cells: 1, see below example: powerdown: powerdown-controller { + compatible = "st,stih407-powerdown"; #reset-cells = <1>; - compatible = "st,stih415-powerdown"; }; @@ -37,11 +36,10 @@ index specifying which channel to use, as described in reset.txt example: - usb1: usb@fe200000 { - resets = <&powerdown STIH41X_USB1_POWERDOWN>; + st_dwc3: dwc3@8f94000 { + resets = <&powerdown STIH407_USB3_POWERDOWN>, }; Macro definitions for the supported reset channels can be found in: -include/dt-bindings/reset/stih415-resets.h -include/dt-bindings/reset/stih416-resets.h +include/dt-bindings/reset/stih407-resets.h diff --git a/dts/Bindings/reset/st,sti-softreset.txt b/dts/Bindings/reset/st,sti-softreset.txt index 891a2fd85e..a21658f18f 100644 --- a/dts/Bindings/reset/st,sti-softreset.txt +++ b/dts/Bindings/reset/st,sti-softreset.txt @@ -15,15 +15,14 @@ Please refer to reset.txt in this directory for common reset controller binding usage. Required properties: -- compatible: Should be "st,<chip>-softreset" example: - "st,stih415-softreset" or "st,stih416-softreset"; +- compatible: Should be st,stih407-softreset"; - #reset-cells: 1, see below example: softreset: softreset-controller { #reset-cells = <1>; - compatible = "st,stih415-softreset"; + compatible = "st,stih407-softreset"; }; @@ -42,5 +41,4 @@ example: Macro definitions for the supported reset channels can be found in: -include/dt-bindings/reset/stih415-resets.h -include/dt-bindings/reset/stih416-resets.h +include/dt-bindings/reset/stih407-resets.h diff --git a/dts/Bindings/rng/omap_rng.txt b/dts/Bindings/rng/omap_rng.txt index 6a62acd869..471477299e 100644 --- a/dts/Bindings/rng/omap_rng.txt +++ b/dts/Bindings/rng/omap_rng.txt @@ -1,4 +1,4 @@ -OMAP SoC HWRNG Module +OMAP SoC and Inside-Secure HWRNG Module Required properties: @@ -6,11 +6,13 @@ Required properties: RNG versions: - "ti,omap2-rng" for OMAP2. - "ti,omap4-rng" for OMAP4, OMAP5 and AM33XX. + - "inside-secure,safexcel-eip76" for SoCs with EIP76 IP block Note that these two versions are incompatible. - ti,hwmods: Name of the hwmod associated with the RNG module - reg : Offset and length of the register set for the module - interrupts : the interrupt number for the RNG module. - Only used for "ti,omap4-rng". + Used for "ti,omap4-rng" and "inside-secure,safexcel-eip76" +- clocks: the trng clock source Example: /* AM335x */ @@ -20,3 +22,11 @@ rng: rng@48310000 { reg = <0x48310000 0x2000>; interrupts = <111>; }; + +/* SafeXcel IP-76 */ +trng: rng@f2760000 { + compatible = "inside-secure,safexcel-eip76"; + reg = <0xf2760000 0x7d>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_syscon0 1 25>; +}; diff --git a/dts/Bindings/rtc/epson,rtc7301.txt b/dts/Bindings/rtc/epson,rtc7301.txt new file mode 100644 index 0000000000..5f9df3f146 --- /dev/null +++ b/dts/Bindings/rtc/epson,rtc7301.txt @@ -0,0 +1,16 @@ +EPSON TOYOCOM RTC-7301SF/DG + +Required properties: + +- compatible: Should be "epson,rtc7301sf" or "epson,rtc7301dg" +- reg: Specifies base physical address and size of the registers. +- interrupts: A single interrupt specifier. + +Example: + +rtc: rtc@44a00000 { + compatible = "epson,rtc7301dg"; + reg = <0x44a00000 0x10000>; + interrupt-parent = <&axi_intc_0>; + interrupts = <3 2>; +}; diff --git a/dts/Bindings/rtc/ingenic,jz4740-rtc.txt b/dts/Bindings/rtc/ingenic,jz4740-rtc.txt new file mode 100644 index 0000000000..41c7ae18fd --- /dev/null +++ b/dts/Bindings/rtc/ingenic,jz4740-rtc.txt @@ -0,0 +1,37 @@ +JZ4740 and similar SoCs real-time clock driver + +Required properties: + +- compatible: One of: + - "ingenic,jz4740-rtc" - for use with the JZ4740 SoC + - "ingenic,jz4780-rtc" - for use with the JZ4780 SoC +- reg: Address range of rtc register set +- interrupts: IRQ number for the alarm interrupt +- clocks: phandle to the "rtc" clock +- clock-names: must be "rtc" + +Optional properties: +- system-power-controller: To use this component as the + system power controller +- reset-pin-assert-time-ms: Reset pin low-level assertion + time after wakeup (default 60ms; range 0-125ms if RTC clock + at 32 kHz) +- min-wakeup-pin-assert-time-ms: Minimum wakeup pin assertion + time (default 100ms; range 0-2s if RTC clock at 32 kHz) + +Example: + +rtc@10003000 { + compatible = "ingenic,jz4740-rtc"; + reg = <0x10003000 0x40>; + + interrupt-parent = <&intc>; + interrupts = <32>; + + clocks = <&rtc_clock>; + clock-names = "rtc"; + + system-power-controller; + reset-pin-assert-time-ms = <60>; + min-wakeup-pin-assert-time-ms = <100>; +}; diff --git a/dts/Bindings/rtc/maxim,ds3231.txt b/dts/Bindings/rtc/maxim,ds3231.txt index ddef330d27..1ad4c1c2b3 100644 --- a/dts/Bindings/rtc/maxim,ds3231.txt +++ b/dts/Bindings/rtc/maxim,ds3231.txt @@ -1,7 +1,7 @@ * Maxim DS3231 Real Time Clock Required properties: -see: Documentation/devicetree/bindings/i2c/trivial-devices.txt +see: Documentation/devicetree/bindings/i2c/trivial-admin-guide/devices.rst Optional property: - #clock-cells: Should be 1. diff --git a/dts/Bindings/rtc/pcf8563.txt b/dts/Bindings/rtc/pcf8563.txt index 72f6d2c966..086c998c55 100644 --- a/dts/Bindings/rtc/pcf8563.txt +++ b/dts/Bindings/rtc/pcf8563.txt @@ -3,7 +3,7 @@ Philips PCF8563/Epson RTC8564 Real Time Clock Required properties: -see: Documentation/devicetree/bindings/i2c/trivial-devices.txt +see: Documentation/devicetree/bindings/i2c/trivial-admin-guide/devices.rst Optional property: - #clock-cells: Should be 0. diff --git a/dts/Bindings/rtc/twl-rtc.txt b/dts/Bindings/rtc/twl-rtc.txt index 596e0c97be..8f9a94f2f8 100644 --- a/dts/Bindings/rtc/twl-rtc.txt +++ b/dts/Bindings/rtc/twl-rtc.txt @@ -1,12 +1,11 @@ -* TI twl RTC - -The TWL family (twl4030/6030) contains a RTC. +* Texas Instruments TWL4030/6030 RTC Required properties: -- compatible : Should be twl4030-rtc - -Examples: - -rtc@0 { - compatible = "ti,twl4030-rtc"; -}; +- compatible : Should be "ti,twl4030-rtc" +- interrupts : Should be the interrupt number. + +Example: + rtc { + compatible = "ti,twl4030-rtc"; + interrupts = <11>; + }; diff --git a/dts/Bindings/scsi/hisilicon-sas.txt b/dts/Bindings/scsi/hisilicon-sas.txt index bf2411f366..2a42a323fa 100644 --- a/dts/Bindings/scsi/hisilicon-sas.txt +++ b/dts/Bindings/scsi/hisilicon-sas.txt @@ -6,6 +6,7 @@ Main node required properties: - compatible : value should be as follows: (a) "hisilicon,hip05-sas-v1" for v1 hw in hip05 chipset (b) "hisilicon,hip06-sas-v2" for v2 hw in hip06 chipset + (c) "hisilicon,hip07-sas-v2" for v2 hw in hip07 chipset - sas-addr : array of 8 bytes for host SAS address - reg : Address and length of the SAS register - hisilicon,sas-syscon: phandle of syscon used for sas control diff --git a/dts/Bindings/security/tpm/ibmvtpm.txt b/dts/Bindings/security/tpm/ibmvtpm.txt new file mode 100644 index 0000000000..d89f999713 --- /dev/null +++ b/dts/Bindings/security/tpm/ibmvtpm.txt @@ -0,0 +1,41 @@ +* Device Tree Bindings for IBM Virtual Trusted Platform Module(vtpm) + +Required properties: + +- compatible : property name that conveys the platform architecture + identifiers, as 'IBM,vtpm' +- device_type : specifies type of virtual device +- interrupts : property specifying the interrupt source number and + sense code associated with this virtual I/O Adapters +- ibm,my-drc-index : integer index for the connector between the device + and its parent - present only if Dynamic + Reconfiguration(DR) Connector is enabled +- ibm,#dma-address-cells: specifies the number of cells that are used to + encode the physical address field of dma-window + properties +- ibm,#dma-size-cells : specifies the number of cells that are used to + encode the size field of dma-window properties +- ibm,my-dma-window : specifies DMA window associated with this virtual + IOA +- ibm,loc-code : specifies the unique and persistent location code + associated with this virtual I/O Adapters +- linux,sml-base : 64-bit base address of the reserved memory allocated + for the firmware event log +- linux,sml-size : size of the memory allocated for the firmware event log + +Example (IBM Virtual Trusted Platform Module) +--------------------------------------------- + + vtpm@30000003 { + ibm,#dma-size-cells = <0x2>; + compatible = "IBM,vtpm"; + device_type = "IBM,vtpm"; + ibm,my-drc-index = <0x30000003>; + ibm,#dma-address-cells = <0x2>; + linux,sml-base = <0xc60e 0x0>; + interrupts = <0xa0003 0x0>; + ibm,my-dma-window = <0x10000003 0x0 0x0 0x0 0x10000000>; + ibm,loc-code = "U8286.41A.10082DV-V3-C3"; + reg = <0x30000003>; + linux,sml-size = <0xbce10200>; + }; diff --git a/dts/Bindings/security/tpm/tpm-i2c.txt b/dts/Bindings/security/tpm/tpm-i2c.txt new file mode 100644 index 0000000000..8cb638b7e8 --- /dev/null +++ b/dts/Bindings/security/tpm/tpm-i2c.txt @@ -0,0 +1,21 @@ +* Device Tree Bindings for I2C based Trusted Platform Module(TPM) + +Required properties: + +- compatible : 'manufacturer,model', eg. nuvoton,npct650 +- label : human readable string describing the device, eg. "tpm" +- linux,sml-base : 64-bit base address of the reserved memory allocated for + the firmware event log +- linux,sml-size : size of the memory allocated for the firmware event log + +Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C) +---------------------------------------------------------- + +tpm@57 { + reg = <0x57>; + label = "tpm"; + compatible = "nuvoton,npct650", "nuvoton,npct601"; + linux,sml-base = <0x7f 0xfd450000>; + linux,sml-size = <0x10000>; + status = "okay"; +}; diff --git a/dts/Bindings/security/tpm/tpm_tis_mmio.txt b/dts/Bindings/security/tpm/tpm_tis_mmio.txt new file mode 100644 index 0000000000..41d7405451 --- /dev/null +++ b/dts/Bindings/security/tpm/tpm_tis_mmio.txt @@ -0,0 +1,25 @@ +Trusted Computing Group MMIO Trusted Platform Module + +The TCG defines multi vendor standard for accessing a TPM chip, this +is the standard protocol defined to access the TPM via MMIO. Typically +this interface will be implemented over Intel's LPC bus. + +Refer to the 'TCG PC Client Specific TPM Interface Specification (TIS)' TCG +publication for the specification. + +Required properties: + +- compatible: should contain a string below for the chip, followed by + "tcg,tpm-tis-mmio". Valid chip strings are: + * "atmel,at97sc3204" +- reg: The location of the MMIO registers, should be at least 0x5000 bytes +- interrupt-parent/interrupts: An optional interrupt indicating command completion. + +Example: + + tpm_tis@90000 { + compatible = "atmel,at97sc3204", "tcg,tpm-tis-mmio"; + reg = <0x90000 0x5000>; + interrupt-parent = <&EIC0>; + interrupts = <1 2>; + }; diff --git a/dts/Bindings/serial/nvidia,tegra20-hsuart.txt b/dts/Bindings/serial/nvidia,tegra20-hsuart.txt index 845850caf0..c93a2d1c1a 100644 --- a/dts/Bindings/serial/nvidia,tegra20-hsuart.txt +++ b/dts/Bindings/serial/nvidia,tegra20-hsuart.txt @@ -10,7 +10,7 @@ Required properties: See ../reset/reset.txt for details. - reset-names : Must include the following entries: - serial -- dmas : Must contain an entry for each entry in clock-names. +- dmas : Must contain an entry for each entry in dma-names. See ../dma/dma.txt for details. - dma-names : Must include the following entries: - rx diff --git a/dts/Bindings/powerpc/fsl/guts.txt b/dts/Bindings/soc/fsl/guts.txt index b71b2039e1..07adca914d 100644 --- a/dts/Bindings/powerpc/fsl/guts.txt +++ b/dts/Bindings/soc/fsl/guts.txt @@ -25,6 +25,9 @@ Recommended properties: - fsl,liodn-bits : Indicates the number of defined bits in the LIODN registers, for those SOCs that have a PAMU device. + - little-endian : Indicates that the global utilities block is little + endian. The default is big endian. + Examples: global-utilities@e0000 { /* global utilities block */ compatible = "fsl,mpc8548-guts"; diff --git a/dts/Bindings/soc/mediatek/scpsys.txt b/dts/Bindings/soc/mediatek/scpsys.txt index e8f15e3402..16fe94d778 100644 --- a/dts/Bindings/soc/mediatek/scpsys.txt +++ b/dts/Bindings/soc/mediatek/scpsys.txt @@ -9,17 +9,20 @@ domain control. The driver implements the Generic PM domain bindings described in power/power_domain.txt. It provides the power domains defined in -include/dt-bindings/power/mt8173-power.h. +include/dt-bindings/power/mt8173-power.h and mt2701-power.h. Required properties: -- compatible: Must be "mediatek,mt8173-scpsys" +- compatible: Should be one of: + - "mediatek,mt2701-scpsys" + - "mediatek,mt8173-scpsys" - #power-domain-cells: Must be 1 - reg: Address range of the SCPSYS unit - infracfg: must contain a phandle to the infracfg controller - clock, clock-names: clocks according to the common clock binding. - The clocks needed "mm", "mfg", "venc" and "venc_lt". - These are the clocks which hardware needs to be enabled - before enabling certain power domains. + These are clocks which hardware needs to be + enabled before enabling certain power domains. + Required clocks for MT2701: "mm", "mfg", "ethif" + Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt" Optional properties: - vdec-supply: Power supply for the vdec power domain diff --git a/dts/Bindings/soc/qcom/qcom,smd.txt b/dts/Bindings/soc/qcom/qcom,smd.txt index 97d9b3e1bf..ea1dc75ec9 100644 --- a/dts/Bindings/soc/qcom/qcom,smd.txt +++ b/dts/Bindings/soc/qcom/qcom,smd.txt @@ -43,6 +43,13 @@ The edge is described by the following properties: Definition: the identifier for the remote processor as known by the rest of the system. +- label: + Usage: optional + Value type: <string> + Definition: name of the edge, used for debugging and identification + purposes. The node name will be used if this is not + present. + = SMD DEVICES In turn, subnodes of the "edges" represent devices tied to SMD channels on that diff --git a/dts/Bindings/sound/axentia,tse850-pcm5142.txt b/dts/Bindings/sound/axentia,tse850-pcm5142.txt new file mode 100644 index 0000000000..5b9b38f578 --- /dev/null +++ b/dts/Bindings/sound/axentia,tse850-pcm5142.txt @@ -0,0 +1,88 @@ +Devicetree bindings for the Axentia TSE-850 audio complex + +Required properties: + - compatible: "axentia,tse850-pcm5142" + - axentia,ssc-controller: The phandle of the atmel SSC controller used as + cpu dai. + - axentia,audio-codec: The phandle of the PCM5142 codec. + - axentia,add-gpios: gpio specifier that controls the mixer. + - axentia,loop1-gpios: gpio specifier that controls loop relays on channel 1. + - axentia,loop2-gpios: gpio specifier that controls loop relays on channel 2. + - axentia,ana-supply: Regulator that supplies the output amplifier. Must + support voltages in the 2V - 20V range, in 1V steps. + +The schematics explaining the gpios are as follows: + + loop1 relays + IN1 +---o +------------+ o---+ OUT1 + \ / + + + + | / | + +--o +--. | + | add | | + | V | + | .---. | + DAC +----------->|Sum|---+ + | '---' | + | | + + + + + IN2 +---o--+------------+--o---+ OUT2 + loop2 relays + +The 'loop1' gpio pin controlls two relays, which are either in loop position, +meaning that input and output are directly connected, or they are in mixer +position, meaning that the signal is passed through the 'Sum' mixer. Similarly +for 'loop2'. + +In the above, the 'loop1' relays are inactive, thus feeding IN1 to the mixer +(if 'add' is active) and feeding the mixer output to OUT1. The 'loop2' relays +are active, short-cutting the TSE-850 from channel 2. IN1, IN2, OUT1 and OUT2 +are TSE-850 connectors and DAC is the PCB name of the (filtered) output from +the PCM5142 codec. + +Example: + + &i2c { + codec: pcm5142@4c { + compatible = "ti,pcm5142"; + + reg = <0x4c>; + + AVDD-supply = <®_3v3>; + DVDD-supply = <®_3v3>; + CPVDD-supply = <®_3v3>; + + clocks = <&sck>; + + pll-in = <3>; + pll-out = <6>; + }; + }; + + ana: ana-reg { + compatible = "pwm-regulator"; + + regulator-name = "ANA"; + + pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>; + pwm-dutycycle-unit = <1000>; + pwm-dutycycle-range = <100 1000>; + + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <20000000>; + regulator-ramp-delay = <1000>; + }; + + sound { + compatible = "axentia,tse850-pcm5142"; + + axentia,ssc-controller = <&ssc0>; + axentia,audio-codec = <&codec>; + + axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>; + axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>; + axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>; + + axentia,ana-supply = <&ana>; + }; diff --git a/dts/Bindings/sound/cs35l34.txt b/dts/Bindings/sound/cs35l34.txt new file mode 100644 index 0000000000..b218ead2e6 --- /dev/null +++ b/dts/Bindings/sound/cs35l34.txt @@ -0,0 +1,64 @@ +CS35L34 Speaker Amplifier + +Required properties: + + - compatible : "cirrus,cs35l34" + + - reg : the I2C address of the device for I2C. + + - VA-supply, VP-supply : power supplies for the device, + as covered in + Documentation/devicetree/bindings/regulator/regulator.txt. + + - cirrus,boost-vtge-millivolt : Boost Voltage Value. Configures the boost + converter's output voltage in mV. The range is from VP to 8V with + increments of 100mV. + + - cirrus,boost-nanohenry: Inductor value for boost converter. The value is + in nH and they can be values of 1000nH, 1100nH, 1200nH, 1500nH, and 2200nH. + +Optional properties: + + - reset-gpios: GPIO used to reset the amplifier. + + - interrupt-parent : Specifies the phandle of the interrupt controller to + which the IRQs from CS35L34 are delivered to. + - interrupts : IRQ line info CS35L34. + (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + for further information relating to interrupt properties) + + - cirrus,boost-peak-milliamp : Boost converter peak current limit in mA. The + range starts at 1200mA and goes to a maximum of 3840mA with increments of + 80mA. The default value is 2480mA. + + - cirrus,i2s-sdinloc : ADSP SDIN I2S channel location. Indicates whether the + received mono data is in the left or right portion of the I2S frame + according to the AD0 pin or directly via this configuration. + 0x0 (Default) = Selected by AD0 input (if AD0 = LOW, use left channel), + 0x2 = Left, + 0x1 = Selected by the inversion of the AD0 input (if AD0 = LOW, use right + channel), + 0x3 = Right. + + - cirrus,gain-zc-disable: Boolean property. If set, the gain change will take + effect without waiting for a zero cross. + + - cirrus,tdm-rising-edge: Boolean property. If set, data is on the rising edge of + SCLK. Otherwise, data is on the falling edge of SCLK. + + +Example: + +cs35l34: cs35l34@40 { + compatible = "cirrus,cs35l34"; + reg = <0x40>; + + interrupt-parent = <&gpio8>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&gpio 10 0>; + + cirrus,boost-vtge-milltvolt = <8000>; /* 8V */ + cirrus,boost-ind-nanohenry = <1000>; /* 1uH */ + cirrus,boost-peak-milliamp = <3000>; /* 3A */ +}; diff --git a/dts/Bindings/sound/cs42l42.txt b/dts/Bindings/sound/cs42l42.txt new file mode 100644 index 0000000000..9a2c5e2423 --- /dev/null +++ b/dts/Bindings/sound/cs42l42.txt @@ -0,0 +1,110 @@ +CS42L42 audio CODEC + +Required properties: + + - compatible : "cirrus,cs42l42" + + - reg : the I2C address of the device for I2C. + + - VP-supply, VCP-supply, VD_FILT-supply, VL-supply, VA-supply : + power supplies for the device, as covered in + Documentation/devicetree/bindings/regulator/regulator.txt. + +Optional properties: + + - reset-gpios : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the codec starts. + + - interrupt-parent : Specifies the phandle of the interrupt controller to + which the IRQs from CS42L42 are delivered to. + + - interrupts : IRQ line info CS42L42. + (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + for further information relating to interrupt properties) + + - cirrus,ts-inv : Boolean property. For jacks that invert the tip sense + polarity. Normal jacks will short tip sense pin to HS1 when headphones are + plugged in and leave tip sense floating when not plugged in. Inverting jacks + short tip sense when unplugged and float when plugged in. + + 0 = (Default) Non-inverted + 1 = Inverted + + - cirrus,ts-dbnc-rise : Debounce the rising edge of TIP_SENSE_PLUG. With no + debounce, the tip sense pin might be noisy on a plug event. + + 0 - 0ms, + 1 - 125ms, + 2 - 250ms, + 3 - 500ms, + 4 - 750ms, + 5 - (Default) 1s, + 6 - 1.25s, + 7 - 1.5s, + + - cirrus,ts-dbnc-fall : Debounce the falling edge of TIP_SENSE_UNPLUG. + With no debounce, the tip sense pin might be noisy on an unplug event. + + 0 - 0ms, + 1 - 125ms, + 2 - 250ms, + 3 - 500ms, + 4 - 750ms, + 5 - (Default) 1s, + 6 - 1.25s, + 7 - 1.5s, + + - cirrus,btn-det-init-dbnce : This sets how long the driver sleeps after + enabling button detection interrupts. After auto-detection and before + servicing button interrupts, the HS bias needs time to settle. If you + don't wait, there is possibility for erroneous button interrupt. + + 0ms - 200ms, + Default = 100ms + + - cirrus,btn-det-event-dbnce : This sets how long the driver delays after + receiving a button press interrupt. With level detect interrupts, you want + to wait a small amount of time to make sure the button press is making a + clean connection with the bias resistors. + + 0ms - 20ms, + Default = 10ms + + - cirrus,bias-lvls : For a level-detect headset button scheme, each button + will bias the mic pin to a certain voltage. To determine which button was + pressed, the driver will compare this biased voltage to sequential, + decreasing voltages and will stop when a comparator is tripped, + indicating a comparator voltage < bias voltage. This value represents a + percentage of the internally generated HS bias voltage. For different + hardware setups, a designer might want to tweak this. This is an array of + descending values for the comparator voltage. + + Array of 4 values + Each 0-63 + < x1 x2 x3 x4 > + Default = < 15 8 4 1> + + +Example: + +cs42l42: cs42l42@48 { + compatible = "cirrus,cs42l42"; + reg = <0x48>; + VA-supply = <&dummy_vreg>; + VP-supply = <&dummy_vreg>; + VCP-supply = <&dummy_vreg>; + VD_FILT-supply = <&dummy_vreg>; + VL-supply = <&dummy_vreg>; + + reset-gpios = <&axi_gpio_0 1 0>; + interrupt-parent = <&gpio0>; + interrupts = <55 8> + + cirrus,ts-inv = <0x00>; + cirrus,ts-dbnc-rise = <0x05>; + cirrus,ts-dbnc-fall = <0x00>; + cirrus,btn-det-init-dbnce = <100>; + cirrus,btn-det-event-dbnce = <10>; + cirrus,bias-lvls = <0x0F 0x08 0x04 0x01>; + cirrus,hs-bias-ramp-rate = <0x02>; +};
\ No newline at end of file diff --git a/dts/Bindings/sound/davinci-mcbsp.txt b/dts/Bindings/sound/davinci-mcbsp.txt index 55b53e1fd7..e0b6165c9c 100644 --- a/dts/Bindings/sound/davinci-mcbsp.txt +++ b/dts/Bindings/sound/davinci-mcbsp.txt @@ -43,7 +43,7 @@ mcbsp0: mcbsp@1d10000 { <0x00310000 0x1000>; reg-names = "mpu", "dat"; interrupts = <97 98>; - interrupts-names = "rx", "tx"; + interrupt-names = "rx", "tx"; dmas = <&edma0 3 1 &edma0 2 1>; dma-names = "tx", "rx"; diff --git a/dts/Bindings/sound/qcom,apq8016-sbc.txt b/dts/Bindings/sound/qcom,apq8016-sbc.txt index d9d8635ff9..6a4aadc4ce 100644 --- a/dts/Bindings/sound/qcom,apq8016-sbc.txt +++ b/dts/Bindings/sound/qcom,apq8016-sbc.txt @@ -44,8 +44,7 @@ Required dai-link subnodes: Required CPU/CODEC subnodes properties: -link-name : Name of the dai link. --sound-dai : phandle and port of CPU/CODEC --capture-dai : phandle and port of CPU/CODEC +-sound-dai : phandle/s and port of CPU/CODEC Example: @@ -73,7 +72,7 @@ sound: sound { sound-dai = <&lpass MI2S_PRIMARY>; }; codec { - sound-dai = <&wcd_codec 0>; + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; }; }; diff --git a/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt b/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt new file mode 100644 index 0000000000..ccb401cfef --- /dev/null +++ b/dts/Bindings/sound/qcom,msm8916-wcd-analog.txt @@ -0,0 +1,85 @@ +msm8916 analog audio CODEC + +Bindings for codec Analog IP which is integrated in pmic pm8916, + +## Bindings for codec core on pmic: + +Required properties + - compatible = "qcom,pm8916-wcd-analog-codec"; + - reg: represents the slave base address provided to the peripheral. + - interrupt-parent : The parent interrupt controller. + - interrupts: List of interrupts in given SPMI peripheral. + - interrupt-names: Names specified to above list of interrupts in same + order. List of supported interrupt names are: + "cdc_spk_cnp_int" - Speaker click and pop interrupt. + "cdc_spk_clip_int" - Speaker clip interrupt. + "cdc_spk_ocp_int" - Speaker over current protect interrupt. + "mbhc_ins_rem_det1" - jack insert removal detect interrupt 1. + "mbhc_but_rel_det" - button release interrupt. + "mbhc_but_press_det" - button press event + "mbhc_ins_rem_det" - jack insert removal detect interrupt. + "mbhc_switch_int" - multi button headset interrupt. + "cdc_ear_ocp_int" - Earphone over current protect interrupt. + "cdc_hphr_ocp_int" - Headphone R over current protect interrupt. + "cdc_hphl_ocp_det" - Headphone L over current protect interrupt. + "cdc_ear_cnp_int" - earphone cnp interrupt. + "cdc_hphr_cnp_int" - hphr click and pop interrupt. + "cdc_hphl_cnp_int" - hphl click and pop interrupt. + + - clocks: Handle to mclk. + - clock-names: should be "mclk" + - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node. + - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node. + - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node. + +Optional Properties: +- qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor + connected. +- qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor + connected. + +Example: + +spmi_bus { + ... + audio-codec@f000{ + compatible = "qcom,pm8916-wcd-analog-codec"; + reg = <0xf000 0x200>; + reg-names = "pmic-codec-core"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + interrupt-parent = <&spmi_bus>; + interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, + <0x1 0xf0 0x1 IRQ_TYPE_NONE>, + <0x1 0xf0 0x2 IRQ_TYPE_NONE>, + <0x1 0xf0 0x3 IRQ_TYPE_NONE>, + <0x1 0xf0 0x4 IRQ_TYPE_NONE>, + <0x1 0xf0 0x5 IRQ_TYPE_NONE>, + <0x1 0xf0 0x6 IRQ_TYPE_NONE>, + <0x1 0xf0 0x7 IRQ_TYPE_NONE>, + <0x1 0xf1 0x0 IRQ_TYPE_NONE>, + <0x1 0xf1 0x1 IRQ_TYPE_NONE>, + <0x1 0xf1 0x2 IRQ_TYPE_NONE>, + <0x1 0xf1 0x3 IRQ_TYPE_NONE>, + <0x1 0xf1 0x4 IRQ_TYPE_NONE>, + <0x1 0xf1 0x5 IRQ_TYPE_NONE>; + interrupt-names = "cdc_spk_cnp_int", + "cdc_spk_clip_int", + "cdc_spk_ocp_int", + "mbhc_ins_rem_det1", + "mbhc_but_rel_det", + "mbhc_but_press_det", + "mbhc_ins_rem_det", + "mbhc_switch_int", + "cdc_ear_ocp_int", + "cdc_hphr_ocp_int", + "cdc_hphl_ocp_det", + "cdc_ear_cnp_int", + "cdc_hphr_cnp_int", + "cdc_hphl_cnp_int"; + VDD-CDC-IO-supply = <&pm8916_l5>; + VDD-CDC-TX-RX-CX-supply = <&pm8916_l5>; + VDD-MICBIAS-supply = <&pm8916_l13>; + #sound-dai-cells = <1>; + }; +}; diff --git a/dts/Bindings/sound/qcom,msm8916-wcd-digital.txt b/dts/Bindings/sound/qcom,msm8916-wcd-digital.txt new file mode 100644 index 0000000000..1c8e4cb251 --- /dev/null +++ b/dts/Bindings/sound/qcom,msm8916-wcd-digital.txt @@ -0,0 +1,20 @@ +msm8916 digital audio CODEC + +## Bindings for codec core in lpass: + +Required properties + - compatible = "qcom,msm8916-wcd-digital-codec"; + - reg: address space for lpass codec. + - clocks: Handle to mclk and ahbclk + - clock-names: should be "mclk", "ahbix-clk". + +Example: + +audio-codec@771c000{ + compatible = "qcom,msm8916-wcd-digital-codec"; + reg = <0x0771c000 0x400>; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "ahbix-clk", "mclk"; + #sound-dai-cells = <1>; +}; diff --git a/dts/Bindings/sound/rt5514.txt b/dts/Bindings/sound/rt5514.txt index 9cabfc18cb..929ca6756b 100644 --- a/dts/Bindings/sound/rt5514.txt +++ b/dts/Bindings/sound/rt5514.txt @@ -13,6 +13,9 @@ Optional properties: - clocks: The phandle of the master clock to the CODEC - clock-names: Should be "mclk" +- realtek,dmic-init-delay-ms + Set the DMIC initial delay (ms) to wait it ready. + Pins on the device (for linking into audio routes) for RT5514: * DMIC1L diff --git a/dts/Bindings/sound/rt5663.txt b/dts/Bindings/sound/rt5663.txt index 7d3c974c6e..70eaeaed2b 100644 --- a/dts/Bindings/sound/rt5663.txt +++ b/dts/Bindings/sound/rt5663.txt @@ -1,10 +1,10 @@ -RT5663/RT5668 audio CODEC +RT5663 audio CODEC This device supports I2C only. Required properties: -- compatible : One of "realtek,rt5663" or "realtek,rt5668". +- compatible : "realtek,rt5663". - reg : The I2C address of the device. @@ -12,7 +12,7 @@ Required properties: Optional properties: -Pins on the device (for linking into audio routes) for RT5663/RT5668: +Pins on the device (for linking into audio routes) for RT5663: * IN1P * IN1N diff --git a/dts/Bindings/sound/rt5665.txt b/dts/Bindings/sound/rt5665.txt new file mode 100755 index 0000000000..419c892196 --- /dev/null +++ b/dts/Bindings/sound/rt5665.txt @@ -0,0 +1,68 @@ +RT5665/RT5666/RT5668 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : One of "realtek,rt5665", "realtek,rt5666" or "realtek,rt5668". + +- reg : The I2C address of the device. + +- interrupts : The CODEC's interrupt output. + +Optional properties: + +- realtek,in1-differential +- realtek,in2-differential +- realtek,in3-differential +- realtek,in4-differential + Boolean. Indicate MIC1/2/3/4 input are differential, rather than single-ended. + +- realtek,dmic1-data-pin + 0: dmic1 is not used + 1: using GPIO4 pin as dmic1 data pin + 2: using IN2N pin as dmic2 data pin + +- realtek,dmic2-data-pin + 0: dmic2 is not used + 1: using GPIO5 pin as dmic2 data pin + 2: using IN2P pin as dmic2 data pin + +- realtek,jd-src + 0: No JD is used + 1: using JD1 as JD source + +- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin. + +Pins on the device (for linking into audio routes) for RT5659/RT5658: + + * DMIC L1 + * DMIC R1 + * DMIC L2 + * DMIC R2 + * IN1P + * IN1N + * IN2P + * IN2N + * IN3P + * IN3N + * IN4P + * IN4N + * HPOL + * HPOR + * LOUTL + * LOUTR + * MONOOUT + * PDML + * PDMR + +Example: + +rt5659 { + compatible = "realtek,rt5665"; + reg = <0x1b>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>; + realtek,ldo1-en-gpios = + <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; +}; diff --git a/dts/Bindings/sound/samsung,tm2-audio.txt b/dts/Bindings/sound/samsung,tm2-audio.txt new file mode 100644 index 0000000000..94442e5673 --- /dev/null +++ b/dts/Bindings/sound/samsung,tm2-audio.txt @@ -0,0 +1,38 @@ +Samsung Exynos5433 TM2(E) audio complex with WM5110 codec + +Required properties: + + - compatible : "samsung,tm2-audio" + - model : the user-visible name of this sound complex + - audio-codec : the phandle of the wm5110 audio codec node, + as described in ../mfd/arizona.txt + - i2s-controller : the phandle of the I2S controller + - audio-amplifier : the phandle of the MAX98504 amplifier + - samsung,audio-routing : a list of the connections between audio components; + each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source; valid names for sources and sinks are the + WM5110's and MAX98504's pins and the jacks on the + board: HP, SPK, Main Mic, Sub Mic, Third Mic, + Headset Mic + - mic-bias-gpios : GPIO pin that enables the Main Mic bias regulator + + +Example: + +sound { + compatible = "samsung,tm2-audio"; + audio-codec = <&wm5110>; + i2s-controller = <&i2s0>; + audio-amplifier = <&max98504>; + mic-bias-gpios = <&gpr3 2 0>; + model = "wm5110"; + samsung,audio-routing = + "HP", "HPOUT1L", + "HP", "HPOUT1R", + "SPK", "SPKOUT", + "SPKOUT", "HPOUT2L", + "SPKOUT", "HPOUT2R", + "Main Mic", "MICBIAS2", + "IN1R", "Main Mic"; +}; diff --git a/dts/Bindings/sound/sun4i-codec.txt b/dts/Bindings/sound/sun4i-codec.txt index 0dce690f78..3033bd8aab 100644 --- a/dts/Bindings/sound/sun4i-codec.txt +++ b/dts/Bindings/sound/sun4i-codec.txt @@ -1,8 +1,12 @@ * Allwinner A10 Codec Required properties: -- compatible: must be either "allwinner,sun4i-a10-codec" or - "allwinner,sun7i-a20-codec" +- compatible: must be one of the following compatibles: + - "allwinner,sun4i-a10-codec" + - "allwinner,sun6i-a31-codec" + - "allwinner,sun7i-a20-codec" + - "allwinner,sun8i-a23-codec" + - "allwinner,sun8i-h3-codec" - reg: must contain the registers location and length - interrupts: must contain the codec interrupt - dmas: DMA channels for tx and rx dma. See the DMA client binding, @@ -17,6 +21,43 @@ Required properties: Optional properties: - allwinner,pa-gpios: gpio to enable external amplifier +Required properties for the following compatibles: + - "allwinner,sun6i-a31-codec" + - "allwinner,sun8i-a23-codec" + - "allwinner,sun8i-h3-codec" +- resets: phandle to the reset control for this device +- allwinner,audio-routing: A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. Valid names include: + + Audio pins on the SoC: + "HP" + "HPCOM" + "LINEIN" + "LINEOUT" (not on sun8i-a23) + "MIC1" + "MIC2" + "MIC3" (sun6i-a31 only) + + Microphone biases from the SoC: + "HBIAS" + "MBIAS" + + Board connectors: + "Headphone" + "Headset Mic" + "Line In" + "Line Out" + "Mic" + "Speaker" + +Required properties for the following compatibles: + - "allwinner,sun8i-a23-codec" + - "allwinner,sun8i-h3-codec" +- allwinner,codec-analog-controls: A phandle to the codec analog controls + block in the PRCM. + Example: codec: codec@01c22c00 { #sound-dai-cells = <0>; @@ -28,3 +69,23 @@ codec: codec@01c22c00 { dmas = <&dma 0 19>, <&dma 0 19>; dma-names = "rx", "tx"; }; + +codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-codec"; + reg = <0x01c22c00 0x98>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>; + clock-names = "apb", "codec"; + resets = <&ccu RST_APB1_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + allwinner,audio-routing = + "Headphone", "HP", + "Speaker", "LINEOUT", + "LINEIN", "Line In", + "MIC1", "MBIAS", + "MIC1", "Mic", + "MIC2", "HBIAS", + "MIC2", "Headset Mic"; +}; diff --git a/dts/Bindings/sound/sun8i-codec-analog.txt b/dts/Bindings/sound/sun8i-codec-analog.txt new file mode 100644 index 0000000000..779b735781 --- /dev/null +++ b/dts/Bindings/sound/sun8i-codec-analog.txt @@ -0,0 +1,16 @@ +* Allwinner Codec Analog Controls + +Required properties: +- compatible: must be one of the following compatibles: + - "allwinner,sun8i-a23-codec-analog" + - "allwinner,sun8i-h3-codec-analog" + +Required properties if not a sub-node of the PRCM node: +- reg: must contain the registers location and length + +Example: +prcm: prcm@01f01400 { + codec_analog: codec-analog { + compatible = "allwinner,sun8i-a23-codec-analog"; + }; +}; diff --git a/dts/Bindings/sound/tlv320aic31xx.txt b/dts/Bindings/sound/tlv320aic31xx.txt index 9340d2ddcc..6fbba562ea 100644 --- a/dts/Bindings/sound/tlv320aic31xx.txt +++ b/dts/Bindings/sound/tlv320aic31xx.txt @@ -12,6 +12,7 @@ Required properties: "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP) "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP) "ti,tlv320dac3100" - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP) + "ti,tlv320dac3101" - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP) - reg - <int> - I2C slave address - HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply, diff --git a/dts/Bindings/sound/wm8580.txt b/dts/Bindings/sound/wm8580.txt index 7d9821f348..78fce9b149 100644 --- a/dts/Bindings/sound/wm8580.txt +++ b/dts/Bindings/sound/wm8580.txt @@ -1,10 +1,10 @@ -WM8580 audio CODEC +WM8580 and WM8581 audio CODEC This device supports I2C only. Required properties: - - compatible : "wlf,wm8580" + - compatible : "wlf,wm8580", "wlf,wm8581" - reg : the I2C address of the device. diff --git a/dts/Bindings/spi/sh-msiof.txt b/dts/Bindings/spi/sh-msiof.txt index aa005c1d10..da6614c637 100644 --- a/dts/Bindings/spi/sh-msiof.txt +++ b/dts/Bindings/spi/sh-msiof.txt @@ -10,6 +10,7 @@ Required properties: "renesas,msiof-r8a7792" (R-Car V2H) "renesas,msiof-r8a7793" (R-Car M2-N) "renesas,msiof-r8a7794" (R-Car E2) + "renesas,msiof-r8a7796" (R-Car M3-W) "renesas,msiof-sh73a0" (SH-Mobile AG5) - reg : A list of offsets and lengths of the register sets for the device. diff --git a/dts/Bindings/spi/spi-armada-3700.txt b/dts/Bindings/spi/spi-armada-3700.txt new file mode 100644 index 0000000000..1564aa8c02 --- /dev/null +++ b/dts/Bindings/spi/spi-armada-3700.txt @@ -0,0 +1,25 @@ +* Marvell Armada 3700 SPI Controller + +Required Properties: + +- compatible: should be "marvell,armada-3700-spi" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The interrupt number. The interrupt specifier format depends on + the interrupt controller and of its driver. +- clocks: Must contain the clock source, usually from the North Bridge clocks. +- num-cs: The number of chip selects that is supported by this SPI Controller +- #address-cells: should be 1. +- #size-cells: should be 0. + +Example: + + spi0: spi@10600 { + compatible = "marvell,armada-3700-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10600 0x5d>; + clocks = <&nb_perih_clk 7>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + num-cs = <4>; + }; diff --git a/dts/Bindings/spi/spi-fsl-lpspi.txt b/dts/Bindings/spi/spi-fsl-lpspi.txt new file mode 100644 index 0000000000..225ace1d0c --- /dev/null +++ b/dts/Bindings/spi/spi-fsl-lpspi.txt @@ -0,0 +1,19 @@ +* Freescale Low Power SPI (LPSPI) for i.MX + +Required properties: +- compatible : + - "fsl,imx7ulp-spi" for LPSPI compatible with the one integrated on i.MX7ULP soc +- reg : address and length of the lpspi master registers +- interrupt-parent : core interrupt controller +- interrupts : lpspi interrupt +- clocks : lpspi clock specifier + +Examples: + +lpspi2: lpspi@40290000 { + compatible = "fsl,imx7ulp-spi"; + reg = <0x40290000 0x10000>; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7ULP_CLK_LPSPI2>; +}; diff --git a/dts/Bindings/spi/spi-sun6i.txt b/dts/Bindings/spi/spi-sun6i.txt index 21de73db6a..2ec99b86b6 100644 --- a/dts/Bindings/spi/spi-sun6i.txt +++ b/dts/Bindings/spi/spi-sun6i.txt @@ -1,7 +1,7 @@ -Allwinner A31 SPI controller +Allwinner A31/H3 SPI controller Required properties: -- compatible: Should be "allwinner,sun6i-a31-spi". +- compatible: Should be "allwinner,sun6i-a31-spi" or "allwinner,sun8i-h3-spi". - reg: Should contain register location and length. - interrupts: Should contain interrupt. - clocks: phandle to the clocks feeding the SPI controller. Two are @@ -12,6 +12,11 @@ Required properties: - resets: phandle to the reset controller asserting this device in reset +Optional properties: +- dmas: DMA specifiers for rx and tx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: DMA request names should include "rx" and "tx" if present. + Example: spi1: spi@01c69000 { @@ -22,3 +27,19 @@ spi1: spi@01c69000 { clock-names = "ahb", "mod"; resets = <&ahb1_rst 21>; }; + +spi0: spi@01c68000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c68000 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; +}; diff --git a/dts/Bindings/sram/sram.txt b/dts/Bindings/sram/sram.txt index add48f0901..068c2c03c3 100644 --- a/dts/Bindings/sram/sram.txt +++ b/dts/Bindings/sram/sram.txt @@ -4,7 +4,7 @@ Simple IO memory regions to be managed by the genalloc API. Required properties: -- compatible : mmio-sram +- compatible : mmio-sram or atmel,sama5d2-securam - reg : SRAM iomem address range diff --git a/dts/Bindings/submitting-patches.txt b/dts/Bindings/submitting-patches.txt index 7d44eae7ab..274058c583 100644 --- a/dts/Bindings/submitting-patches.txt +++ b/dts/Bindings/submitting-patches.txt @@ -3,7 +3,7 @@ I. For patch submitters - 0) Normal patch submission rules from Documentation/SubmittingPatches + 0) Normal patch submission rules from Documentation/process/submitting-patches.rst applies. 1) The Documentation/ portion of the patch should be a separate patch. diff --git a/dts/Bindings/thermal/brcm,bcm2835-thermal.txt b/dts/Bindings/thermal/brcm,bcm2835-thermal.txt new file mode 100644 index 0000000000..474531d2b2 --- /dev/null +++ b/dts/Bindings/thermal/brcm,bcm2835-thermal.txt @@ -0,0 +1,17 @@ +Binding for Thermal Sensor driver for BCM2835 SoCs. + +Required parameters: +------------------- + +compatible: should be one of: "brcm,bcm2835-thermal", + "brcm,bcm2836-thermal" or "brcm,bcm2837-thermal" +reg: Address range of the thermal registers. +clocks: Phandle of the clock used by the thermal sensor. + +Example: + +thermal: thermal@7e212000 { + compatible = "brcm,bcm2835-thermal"; + reg = <0x7e212000 0x8>; + clocks = <&clocks BCM2835_CLOCK_TSENS>; +}; diff --git a/dts/Bindings/thermal/rockchip-thermal.txt b/dts/Bindings/thermal/rockchip-thermal.txt index 08efe6bc21..43003aec94 100644 --- a/dts/Bindings/thermal/rockchip-thermal.txt +++ b/dts/Bindings/thermal/rockchip-thermal.txt @@ -22,10 +22,13 @@ Required properties: TSADC controller. - pinctrl-2 : The "sleep" pinctrl state, it will be in for suspend. - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. + +Optional properties: - rockchip,hw-tshut-temp : The hardware-controlled shutdown temperature value. - rockchip,hw-tshut-mode : The hardware-controlled shutdown mode 0:CRU 1:GPIO. - rockchip,hw-tshut-polarity : The hardware-controlled active polarity 0:LOW 1:HIGH. +- rockchip,grf : The phandle of the syscon node for the general register file. Exiample: tsadc: tsadc@ff280000 { diff --git a/dts/Bindings/thermal/st-thermal.txt b/dts/Bindings/thermal/st-thermal.txt index 3b9251b4a1..a2f939137e 100644 --- a/dts/Bindings/thermal/st-thermal.txt +++ b/dts/Bindings/thermal/st-thermal.txt @@ -3,17 +3,8 @@ Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs. Required parameters: ------------------- -compatible : st,<SoC>-<module>-thermal; should be one of: - "st,stih415-sas-thermal", - "st,stih415-mpe-thermal", - "st,stih416-sas-thermal" - "st,stih416-mpe-thermal" - "st,stid127-thermal" or - "st,stih407-thermal" - according to the SoC type (stih415, stih416, stid127, stih407) - and module type (sas or mpe). On stid127 & stih407 there is only - one die/module, so there is no module type in the compatible - string. +compatible : Should be "st,stih407-thermal" + clock-names : Should be "thermal". See: Documentation/devicetree/bindings/resource-names.txt clocks : Phandle of the clock used by the thermal sensor. @@ -25,18 +16,17 @@ Optional parameters: reg : For non-sysconf based sensors, this should be the physical base address and length of the sensor's registers. interrupts : Standard way to define interrupt number. - Interrupt is mandatory to be defined when compatible is - "stih416-mpe-thermal". NB: For thermal sensor's for which no interrupt has been defined, a polling delay of 1000ms will be used to read the temperature from device. Example: - temp1@fdfe8000 { - compatible = "st,stih416-mpe-thermal"; - reg = <0xfdfe8000 0x10>; - clock-names = "thermal"; - clocks = <&clk_m_mpethsens>; - interrupts = <GIC_SPI 23 IRQ_TYPE_NONE>; + temp0@91a0000 { + compatible = "st,stih407-thermal"; + reg = <0x91a0000 0x28>; + clock-names = "thermal"; + clocks = <&CLK_SYSIN>; + interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; + st,passive_cooling_temp = <110>; }; diff --git a/dts/Bindings/timer/ezchip,nps400-timer0.txt b/dts/Bindings/timer/ezchip,nps400-timer0.txt new file mode 100644 index 0000000000..e3cfce8fec --- /dev/null +++ b/dts/Bindings/timer/ezchip,nps400-timer0.txt @@ -0,0 +1,17 @@ +NPS Network Processor + +Required properties: + +- compatible : should be "ezchip,nps400-timer0" + +Clocks required for compatible = "ezchip,nps400-timer0": +- interrupts : The interrupt of the first timer +- clocks : Must contain a single entry describing the clock input + +Example: + +timer { + compatible = "ezchip,nps400-timer0"; + interrupts = <3>; + clocks = <&sysclk>; +}; diff --git a/dts/Bindings/timer/ezchip,nps400-timer.txt b/dts/Bindings/timer/ezchip,nps400-timer1.txt index c8c03d7003..c0ab4190b8 100644 --- a/dts/Bindings/timer/ezchip,nps400-timer.txt +++ b/dts/Bindings/timer/ezchip,nps400-timer1.txt @@ -2,14 +2,14 @@ NPS Network Processor Required properties: -- compatible : should be "ezchip,nps400-timer" +- compatible : should be "ezchip,nps400-timer1" -Clocks required for compatible = "ezchip,nps400-timer": +Clocks required for compatible = "ezchip,nps400-timer1": - clocks : Must contain a single entry describing the clock input Example: timer { - compatible = "ezchip,nps400-timer"; + compatible = "ezchip,nps400-timer1"; clocks = <&sysclk>; }; diff --git a/dts/Bindings/ufs/ufs-qcom.txt b/dts/Bindings/ufs/ufs-qcom.txt index 070baf4d7d..b6b5130e5f 100644 --- a/dts/Bindings/ufs/ufs-qcom.txt +++ b/dts/Bindings/ufs/ufs-qcom.txt @@ -7,8 +7,11 @@ To bind UFS PHY with UFS host controller, the controller node should contain a phandle reference to UFS PHY node. Required properties: -- compatible : compatible list, contains "qcom,ufs-phy-qmp-20nm" - or "qcom,ufs-phy-qmp-14nm" according to the relevant phy in use. +- compatible : compatible list, contains one of the following - + "qcom,ufs-phy-qmp-20nm" for 20nm ufs phy, + "qcom,ufs-phy-qmp-14nm" for legacy 14nm ufs phy, + "qcom,msm8996-ufs-phy-qmp-14nm" for 14nm ufs phy + present on MSM8996 chipset. - reg : should contain PHY register address space (mandatory), - reg-names : indicates various resources passed to driver (via reg proptery) by name. Required "reg-names" is "phy_mem". diff --git a/dts/Bindings/usb/atmel-usb.txt b/dts/Bindings/usb/atmel-usb.txt index f4262ed605..ad8ea56a9e 100644 --- a/dts/Bindings/usb/atmel-usb.txt +++ b/dts/Bindings/usb/atmel-usb.txt @@ -6,9 +6,9 @@ Required properties: - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers used in host mode. - reg: Address and length of the register set for the device - - interrupts: Should contain ehci interrupt + - interrupts: Should contain ohci interrupt - clocks: Should reference the peripheral, host and system clocks - - clock-names: Should contains two strings + - clock-names: Should contain three strings "ohci_clk" for the peripheral clock "hclk" for the host clock "uhpck" for the system clock @@ -35,7 +35,7 @@ Required properties: - reg: Address and length of the register set for the device - interrupts: Should contain ehci interrupt - clocks: Should reference the peripheral and the UTMI clocks - - clock-names: Should contains two strings + - clock-names: Should contain two strings "ehci_clk" for the peripheral clock "usb_clk" for the UTMI clock @@ -58,7 +58,7 @@ Required properties: - reg: Address and length of the register set for the device - interrupts: Should contain macb interrupt - clocks: Should reference the peripheral and the AHB clocks - - clock-names: Should contains two strings + - clock-names: Should contain two strings "pclk" for the peripheral clock "hclk" for the AHB clock @@ -85,7 +85,7 @@ Required properties: - reg: Address and length of the register set for the device - interrupts: Should contain usba interrupt - clocks: Should reference the peripheral and host clocks - - clock-names: Should contains two strings + - clock-names: Should contain two strings "pclk" for the peripheral clock "hclk" for the host clock - ep childnode: To specify the number of endpoints and their properties. diff --git a/dts/Bindings/usb/da8xx-usb.txt b/dts/Bindings/usb/da8xx-usb.txt new file mode 100644 index 0000000000..ccb844aba7 --- /dev/null +++ b/dts/Bindings/usb/da8xx-usb.txt @@ -0,0 +1,43 @@ +TI DA8xx MUSB +~~~~~~~~~~~~~ +For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms. + +Required properties: +~~~~~~~~~~~~~~~~~~~~ + - compatible : Should be set to "ti,da830-musb". + + - reg: Offset and length of the USB controller register set. + + - interrupts: The USB interrupt number. + + - interrupt-names: Should be set to "mc". + + - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg". + + - phys: Phandle for the PHY device + + - phy-names: Should be "usb-phy" + +Optional properties: +~~~~~~~~~~~~~~~~~~~~ + - vbus-supply: Phandle to a regulator providing the USB bus power. + +Example: + usb_phy: usb-phy { + compatible = "ti,da830-usb-phy"; + #phy-cells = <0>; + status = "okay"; + }; + usb0: usb@200000 { + compatible = "ti,da830-musb"; + reg = <0x00200000 0x10000>; + interrupts = <58>; + interrupt-names = "mc"; + + dr_mode = "host"; + vbus-supply = <&usb_vbus>; + phys = <&usb_phy 0>; + phy-names = "usb-phy"; + + status = "okay"; + }; diff --git a/dts/Bindings/usb/dwc2.txt b/dts/Bindings/usb/dwc2.txt index 2c30a54790..6c7c2bce6d 100644 --- a/dts/Bindings/usb/dwc2.txt +++ b/dts/Bindings/usb/dwc2.txt @@ -12,6 +12,7 @@ Required properties: - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs; - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs; - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs; + - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs; - snps,dwc2: A generic DWC2 USB controller with default parameters. - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt @@ -25,11 +26,13 @@ Optional properties: Refer to phy/phy-bindings.txt for generic phy consumer properties - dr_mode: shall be one of "host", "peripheral" and "otg" Refer to usb/generic.txt -- g-use-dma: enable dma usage in gadget driver. - g-rx-fifo-size: size of rx fifo size in gadget mode. - g-np-tx-fifo-size: size of non-periodic tx fifo size in gadget mode. - g-tx-fifo-size: size of periodic tx fifo per endpoint (except ep0) in gadget mode. +Deprecated properties: +- g-use-dma: gadget DMA mode is automatically detected + Example: usb@101c0000 { diff --git a/dts/Bindings/usb/mt8173-mtu3.txt b/dts/Bindings/usb/mt8173-mtu3.txt new file mode 100644 index 0000000000..e049d199bf --- /dev/null +++ b/dts/Bindings/usb/mt8173-mtu3.txt @@ -0,0 +1,87 @@ +The device node for Mediatek USB3.0 DRD controller + +Required properties: + - compatible : should be "mediatek,mt8173-mtu3" + - reg : specifies physical base address and size of the registers + - reg-names: should be "mac" for device IP and "ippc" for IP port control + - interrupts : interrupt used by the device IP + - power-domains : a phandle to USB power domain node to control USB's + mtcmos + - vusb33-supply : regulator of USB avdd3.3v + - clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names + - clock-names : must contain "sys_ck" for clock of controller; + "wakeup_deb_p0" and "wakeup_deb_p1" are optional, they are + depends on "mediatek,enable-wakeup" + - phys : a list of phandle + phy specifier pairs + - dr_mode : should be one of "host", "peripheral" or "otg", + refer to usb/generic.txt + +Optional properties: + - #address-cells, #size-cells : should be '2' if the device has sub-nodes + with 'reg' property + - ranges : allows valid 1:1 translation between child's address space and + parent's address space + - extcon : external connector for vbus and idpin changes detection, needed + when supports dual-role mode. + - vbus-supply : reference to the VBUS regulator, needed when supports + dual-role mode. + - pinctl-names : a pinctrl state named "default" must be defined, + "id_float" and "id_ground" are optinal which depends on + "mediatek,enable-manual-drd" + - pinctrl-0 : pin control group + See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + + - maximum-speed : valid arguments are "super-speed", "high-speed" and + "full-speed"; refer to usb/generic.txt + - enable-manual-drd : supports manual dual-role switch via debugfs; usually + used when receptacle is TYPE-A and also wants to support dual-role + mode. + - mediatek,enable-wakeup : supports ip sleep wakeup used by host mode + - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup + control register, it depends on "mediatek,enable-wakeup". + +Sub-nodes: +The xhci should be added as subnode to mtu3 as shown in the following example +if host mode is enabled. The DT binding details of xhci can be found in: +Documentation/devicetree/bindings/usb/mt8173-xhci.txt + +Example: +ssusb: usb@11271000 { + compatible = "mediatek,mt8173-mtu3"; + reg = <0 0x11271000 0 0x3000>, + <0 0x11280700 0 0x0100>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>; + phys = <&phy_port0 PHY_TYPE_USB3>, + <&phy_port1 PHY_TYPE_USB2>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>, + <&pericfg CLK_PERI_USB0>, + <&pericfg CLK_PERI_USB1>; + clock-names = "sys_ck", + "wakeup_deb_p0", + "wakeup_deb_p1"; + vusb33-supply = <&mt6397_vusb_reg>; + vbus-supply = <&usb_p0_vbus>; + extcon = <&extcon_usb>; + dr_mode = "otg"; + mediatek,enable-wakeup; + mediatek,syscon-wakeup = <&pericfg>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb_host: xhci@11270000 { + compatible = "mediatek,mt8173-xhci"; + reg = <0 0x11270000 0 0x1000>; + reg-names = "mac"; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>; + clock-names = "sys_ck"; + vusb33-supply = <&mt6397_vusb_reg>; + status = "disabled"; + }; +}; diff --git a/dts/Bindings/usb/mt8173-xhci.txt b/dts/Bindings/usb/mt8173-xhci.txt index b3a7ffa488..2a930bd52b 100644 --- a/dts/Bindings/usb/mt8173-xhci.txt +++ b/dts/Bindings/usb/mt8173-xhci.txt @@ -2,10 +2,18 @@ MT8173 xHCI The device node for Mediatek SOC USB3.0 host controller +There are two scenarios: the first one only supports xHCI driver; +the second one supports dual-role mode, and the host is based on xHCI +driver. Take account of backward compatibility, we divide bindings +into two parts. + +1st: only supports xHCI driver +------------------------------------------------------------------------ + Required properties: - compatible : should contain "mediatek,mt8173-xhci" - - reg : specifies physical base address and size of the registers, - the first one for MAC, the second for IPPC + - reg : specifies physical base address and size of the registers + - reg-names: should be "mac" for xHCI MAC and "ippc" for IP port control - interrupts : interrupt used by the controller - power-domains : a phandle to USB power domain node to control USB's mtcmos @@ -27,12 +35,16 @@ Optional properties: control register, it depends on "mediatek,wakeup-src". - vbus-supply : reference to the VBUS regulator; - usb3-lpm-capable : supports USB3.0 LPM + - pinctrl-names : a pinctrl state named "default" must be defined + - pinctrl-0 : pin control group + See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt Example: usb30: usb@11270000 { compatible = "mediatek,mt8173-xhci"; reg = <0 0x11270000 0 0x1000>, <0 0x11280700 0 0x0100>; + reg-names = "mac", "ippc"; interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; clocks = <&topckgen CLK_TOP_USB30_SEL>, @@ -49,3 +61,41 @@ usb30: usb@11270000 { mediatek,syscon-wakeup = <&pericfg>; mediatek,wakeup-src = <1>; }; + +2nd: dual-role mode with xHCI driver +------------------------------------------------------------------------ + +In the case, xhci is added as subnode to mtu3. An example and the DT binding +details of mtu3 can be found in: +Documentation/devicetree/bindings/usb/mtu3.txt + +Required properties: + - compatible : should contain "mediatek,mt8173-xhci" + - reg : specifies physical base address and size of the registers + - reg-names: should be "mac" for xHCI MAC + - interrupts : interrupt used by the host controller + - power-domains : a phandle to USB power domain node to control USB's + mtcmos + - vusb33-supply : regulator of USB avdd3.3v + + - clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names + - clock-names : must be + "sys_ck": for clock of xHCI MAC + +Optional properties: + - vbus-supply : reference to the VBUS regulator; + - usb3-lpm-capable : supports USB3.0 LPM + +Example: +usb30: usb@11270000 { + compatible = "mediatek,mt8173-xhci"; + reg = <0 0x11270000 0 0x1000>; + reg-names = "mac"; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>; + clock-names = "sys_ck"; + vusb33-supply = <&mt6397_vusb_reg>; + usb3-lpm-capable; +}; diff --git a/dts/Bindings/usb/ohci-da8xx.txt b/dts/Bindings/usb/ohci-da8xx.txt new file mode 100644 index 0000000000..2dc8f67eda --- /dev/null +++ b/dts/Bindings/usb/ohci-da8xx.txt @@ -0,0 +1,23 @@ +DA8XX USB OHCI controller + +Required properties: + + - compatible: Should be "ti,da830-ohci" + - reg: Should contain one register range i.e. start and length + - interrupts: Description of the interrupt line + - phys: Phandle for the PHY device + - phy-names: Should be "usb-phy" + +Optional properties: + - vbus-supply: phandle of regulator that controls vbus power / over-current + +Example: + +ohci: usb@0225000 { + compatible = "ti,da830-ohci"; + reg = <0x225000 0x1000>; + interrupts = <59>; + phys = <&usb_phy 1>; + phy-names = "usb-phy"; + vbus-supply = <®_usb_ohci>; +}; diff --git a/dts/Bindings/usb/s3c2410-usb.txt b/dts/Bindings/usb/s3c2410-usb.txt new file mode 100644 index 0000000000..e45b38ce29 --- /dev/null +++ b/dts/Bindings/usb/s3c2410-usb.txt @@ -0,0 +1,22 @@ +Samsung S3C2410 and compatible SoC USB controller + +OHCI + +Required properties: + - compatible: should be "samsung,s3c2410-ohci" for USB host controller + - reg: address and lenght of the controller memory mapped region + - interrupts: interrupt number for the USB OHCI controller + - clocks: Should reference the bus and host clocks + - clock-names: Should contain two strings + "usb-bus-host" for the USB bus clock + "usb-host" for the USB host clock + +Example: + +usb0: ohci@49000000 { + compatible = "samsung,s3c2410-ohci"; + reg = <0x49000000 0x100>; + interrupts = <0 0 26 3>; + clocks = <&clocks UCLK>, <&clocks HCLK_USBH>; + clock-names = "usb-bus-host", "usb-host"; +}; diff --git a/dts/Bindings/usb/usb-xhci.txt b/dts/Bindings/usb/usb-xhci.txt index 966885c636..0b7d857600 100644 --- a/dts/Bindings/usb/usb-xhci.txt +++ b/dts/Bindings/usb/usb-xhci.txt @@ -11,6 +11,7 @@ Required properties: - "renesas,xhci-r8a7791" for r8a7791 SoC - "renesas,xhci-r8a7793" for r8a7793 SoC - "renesas,xhci-r8a7795" for r8a7795 SoC + - "renesas,xhci-r8a7796" for r8a7796 SoC - "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 compatible device - "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device - "xhci-platform" (deprecated) diff --git a/dts/Bindings/vendor-prefixes.txt b/dts/Bindings/vendor-prefixes.txt index f0a48ea786..16d3b5e7f5 100644 --- a/dts/Bindings/vendor-prefixes.txt +++ b/dts/Bindings/vendor-prefixes.txt @@ -24,9 +24,11 @@ ampire Ampire Co., Ltd. ams AMS AG amstaos AMS-Taos Inc. analogix Analogix Semiconductor, Inc. +andestech Andes Technology Corporation apm Applied Micro Circuits Corporation (APM) aptina Aptina Imaging arasan Arasan Chip Systems +aries Aries Embedded GmbH arm ARM Ltd. armadeus ARMadeus Systems SARL arrow Arrow Electronics @@ -39,6 +41,7 @@ auo AU Optronics Corporation auvidea Auvidea GmbH avago Avago Technologies avic Shanghai AVIC Optoelectronics Co., Ltd. +axentia Axentia Technologies AB axis Axis Communications AB boe BOE Technology Group Co., Ltd. bosch Bosch Sensortec GmbH @@ -67,6 +70,7 @@ creative Creative Technology Ltd crystalfontz Crystalfontz America, Inc. cubietech Cubietech, Ltd. cypress Cypress Semiconductor Corporation +cznic CZ.NIC, z.s.p.o. dallas Maxim Integrated Products (formerly Dallas Semiconductor) davicom DAVICOM Semiconductor, Inc. delta Delta Electronics, Inc. @@ -126,6 +130,7 @@ hitex Hitex Development Tools holt Holt Integrated Circuits, Inc. honeywell Honeywell hp Hewlett Packard +holtek Holtek Semiconductor, Inc. i2se I2SE GmbH ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. @@ -135,6 +140,7 @@ infineon Infineon Technologies inforce Inforce Computing ingenic Ingenic Semiconductor innolux Innolux Corporation +inside-secure INSIDE Secure intel Intel Corporation intercontrol Inter Control Group invensense InvenSense Inc. @@ -158,18 +164,22 @@ lg LG Corporation linux Linux-specific binding lltc Linear Technology Corporation lsi LSI Corp. (LSI Logic) +macnica Macnica Americas marvell Marvell Technology Group Ltd. maxim Maxim Integrated Products +mcube mCube meas Measurement Specialties mediatek MediaTek Inc. melexis Melexis N.V. melfas MELFAS Inc. +memsic MEMSIC Inc. merrii Merrii Technology Co., Ltd. micrel Micrel Inc. microchip Microchip Technology Inc. microcrystal Micro Crystal AG micron Micron Technology Inc. minix MINIX Technology Ltd. +miramems MiraMEMS Sensing Technology Co., Ltd. mitsubishi Mitsubishi Electric Corporation mosaixtech Mosaix Technologies, Inc. moxa Moxa @@ -180,19 +190,24 @@ mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.) mundoreader Mundo Reader S.L. murata Murata Manufacturing Co., Ltd. mxicy Macronix International Co., Ltd. +myir MYIR Tech Limited national National Semiconductor nec NEC LCD Technologies, Ltd. neonode Neonode Inc. netgear NETGEAR netlogic Broadcom Corporation (formerly NetLogic Microsystems) netxeon Shenzhen Netxeon Technology CO., LTD +nexbox Nexbox newhaven Newhaven Display International +ni National Instruments nintendo Nintendo nokia Nokia nuvoton Nuvoton Technology Corporation +nvd New Vision Display nvidia NVIDIA nxp NXP Semiconductors okaya Okaya Electric America, Inc. +oki Oki Electric Industry Co., Ltd. olimex OLIMEX Ltd. onion Onion Corporation onnn ON Semiconductor Corp. @@ -208,6 +223,7 @@ parade Parade Technologies Inc. pericom Pericom Technology Inc. phytec PHYTEC Messtechnik GmbH picochip Picochip Ltd +pine64 Pine64 pixcir PIXCIR MICROELECTRONICS Co., Ltd plathome Plat'Home Co., Ltd. plda PLDA @@ -229,8 +245,10 @@ realtek Realtek Semiconductor Corp. renesas Renesas Electronics Corporation richtek Richtek Technology Corporation ricoh Ricoh Co. Ltd. +rikomagic Rikomagic Tech Corp. Ltd rockchip Fuzhou Rockchip Electronics Co., Ltd samsung Samsung Semiconductor +samtec Samtec/Softing company sandisk Sandisk Corporation sbs Smart Battery System schindler Schindler @@ -275,6 +293,7 @@ tcg Trusted Computing Group tcl Toby Churchill Ltd. technexion TechNexion technologic Technologic Systems +terasic Terasic Inc. thine THine Electronics, Inc. ti Texas Instruments tlm Trusted Logic Mobility @@ -289,6 +308,7 @@ tronfy Tronfy tronsmart Tronsmart truly Truly Semiconductors Limited tyan Tyan Computer Corporation +udoo Udoo uniwest United Western Technologies Corp (UniWest) upisemi uPI Semiconductor Corp. urt United Radiant Technology Corporation diff --git a/dts/Bindings/video/bridge/sil-sii8620.txt b/dts/Bindings/video/bridge/sil-sii8620.txt new file mode 100644 index 0000000000..9409d9c6a2 --- /dev/null +++ b/dts/Bindings/video/bridge/sil-sii8620.txt @@ -0,0 +1,33 @@ +Silicon Image SiI8620 HDMI/MHL bridge bindings + +Required properties: + - compatible: "sil,sii8620" + - reg: i2c address of the bridge + - cvcc10-supply: Digital Core Supply Voltage (1.0V) + - iovcc18-supply: I/O Supply Voltage (1.8V) + - interrupts, interrupt-parent: interrupt specifier of INT pin + - reset-gpios: gpio specifier of RESET pin + - clocks, clock-names: specification and name of "xtal" clock + - video interfaces: Device node can contain video interface port + node for HDMI encoder according to [1]. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + sii8620@39 { + reg = <0x39>; + compatible = "sil,sii8620"; + cvcc10-supply = <&ldo36_reg>; + iovcc18-supply = <&ldo34_reg>; + interrupt-parent = <&gpf0>; + interrupts = <2 0>; + reset-gpio = <&gpv7 0 0>; + clocks = <&pmu_system_controller 0>; + clock-names = "xtal"; + + port { + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + }; diff --git a/dts/include/dt-bindings/clock/hi3516cv300-clock.h b/dts/include/dt-bindings/clock/hi3516cv300-clock.h new file mode 100644 index 0000000000..5ba51b8388 --- /dev/null +++ b/dts/include/dt-bindings/clock/hi3516cv300-clock.h @@ -0,0 +1,48 @@ +/* + * Copyright (c) 2016 HiSilicon Technologies Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __DTS_HI3516CV300_CLOCK_H +#define __DTS_HI3516CV300_CLOCK_H + +/* hi3516CV300 core CRG */ +#define HI3516CV300_APB_CLK 0 +#define HI3516CV300_UART0_CLK 1 +#define HI3516CV300_UART1_CLK 2 +#define HI3516CV300_UART2_CLK 3 +#define HI3516CV300_SPI0_CLK 4 +#define HI3516CV300_SPI1_CLK 5 +#define HI3516CV300_FMC_CLK 6 +#define HI3516CV300_MMC0_CLK 7 +#define HI3516CV300_MMC1_CLK 8 +#define HI3516CV300_MMC2_CLK 9 +#define HI3516CV300_MMC3_CLK 10 +#define HI3516CV300_ETH_CLK 11 +#define HI3516CV300_ETH_MACIF_CLK 12 +#define HI3516CV300_DMAC_CLK 13 +#define HI3516CV300_PWM_CLK 14 +#define HI3516CV300_USB2_BUS_CLK 15 +#define HI3516CV300_USB2_OHCI48M_CLK 16 +#define HI3516CV300_USB2_OHCI12M_CLK 17 +#define HI3516CV300_USB2_OTG_UTMI_CLK 18 +#define HI3516CV300_USB2_HST_PHY_CLK 19 +#define HI3516CV300_USB2_UTMI0_CLK 20 +#define HI3516CV300_USB2_PHY_CLK 21 + +/* hi3516CV300 sysctrl CRG */ +#define HI3516CV300_WDT_CLK 1 + +#endif /* __DTS_HI3516CV300_CLOCK_H */ diff --git a/dts/include/dt-bindings/clock/histb-clock.h b/dts/include/dt-bindings/clock/histb-clock.h new file mode 100644 index 0000000000..181c0f070f --- /dev/null +++ b/dts/include/dt-bindings/clock/histb-clock.h @@ -0,0 +1,66 @@ +/* + * Copyright (c) 2016 HiSilicon Technologies Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __DTS_HISTB_CLOCK_H +#define __DTS_HISTB_CLOCK_H + +/* clocks provided by core CRG */ +#define HISTB_OSC_CLK 0 +#define HISTB_APB_CLK 1 +#define HISTB_AHB_CLK 2 +#define HISTB_UART1_CLK 3 +#define HISTB_UART2_CLK 4 +#define HISTB_UART3_CLK 5 +#define HISTB_I2C0_CLK 6 +#define HISTB_I2C1_CLK 7 +#define HISTB_I2C2_CLK 8 +#define HISTB_I2C3_CLK 9 +#define HISTB_I2C4_CLK 10 +#define HISTB_I2C5_CLK 11 +#define HISTB_SPI0_CLK 12 +#define HISTB_SPI1_CLK 13 +#define HISTB_SPI2_CLK 14 +#define HISTB_SCI_CLK 15 +#define HISTB_FMC_CLK 16 +#define HISTB_MMC_BIU_CLK 17 +#define HISTB_MMC_CIU_CLK 18 +#define HISTB_MMC_DRV_CLK 19 +#define HISTB_MMC_SAMPLE_CLK 20 +#define HISTB_SDIO0_BIU_CLK 21 +#define HISTB_SDIO0_CIU_CLK 22 +#define HISTB_SDIO0_DRV_CLK 23 +#define HISTB_SDIO0_SAMPLE_CLK 24 +#define HISTB_PCIE_AUX_CLK 25 +#define HISTB_PCIE_PIPE_CLK 26 +#define HISTB_PCIE_SYS_CLK 27 +#define HISTB_PCIE_BUS_CLK 28 +#define HISTB_ETH0_MAC_CLK 29 +#define HISTB_ETH0_MACIF_CLK 30 +#define HISTB_ETH1_MAC_CLK 31 +#define HISTB_ETH1_MACIF_CLK 32 +#define HISTB_COMBPHY1_CLK 33 + + +/* clocks provided by mcu CRG */ +#define HISTB_MCE_CLK 1 +#define HISTB_IR_CLK 2 +#define HISTB_TIMER01_CLK 3 +#define HISTB_LEDC_CLK 4 +#define HISTB_UART0_CLK 5 +#define HISTB_LSADC_CLK 6 + +#endif /* __DTS_HISTB_CLOCK_H */ diff --git a/dts/include/dt-bindings/clock/imx6ul-clock.h b/dts/include/dt-bindings/clock/imx6ul-clock.h index fd8aee8f64..ee9f1a508d 100644 --- a/dts/include/dt-bindings/clock/imx6ul-clock.h +++ b/dts/include/dt-bindings/clock/imx6ul-clock.h @@ -236,6 +236,19 @@ #define IMX6UL_CLK_PLL3_120M 223 #define IMX6UL_CLK_KPP 224 -#define IMX6UL_CLK_END 225 +/* For i.MX6ULL */ +#define IMX6ULL_CLK_ESAI_PRED 225 +#define IMX6ULL_CLK_ESAI_PODF 226 +#define IMX6ULL_CLK_ESAI_EXTAL 227 +#define IMX6ULL_CLK_ESAI_MEM 228 +#define IMX6ULL_CLK_ESAI_IPG 229 +#define IMX6ULL_CLK_DCP_CLK 230 +#define IMX6ULL_CLK_EPDC_PRE_SEL 231 +#define IMX6ULL_CLK_EPDC_SEL 232 +#define IMX6ULL_CLK_EPDC_PODF 233 +#define IMX6ULL_CLK_EPDC_ACLK 234 +#define IMX6ULL_CLK_EPDC_PIX 235 +#define IMX6ULL_CLK_ESAI_SEL 236 +#define IMX6UL_CLK_END 237 #endif /* __DT_BINDINGS_CLOCK_IMX6UL_H */ diff --git a/dts/include/dt-bindings/clock/oxsemi,ox810se.h b/dts/include/dt-bindings/clock/oxsemi,ox810se.h new file mode 100644 index 0000000000..d5facb5e83 --- /dev/null +++ b/dts/include/dt-bindings/clock/oxsemi,ox810se.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef DT_CLOCK_OXSEMI_OX810SE_H +#define DT_CLOCK_OXSEMI_OX810SE_H + +#define CLK_810_LEON 0 +#define CLK_810_DMA_SGDMA 1 +#define CLK_810_CIPHER 2 +#define CLK_810_SATA 3 +#define CLK_810_AUDIO 4 +#define CLK_810_USBMPH 5 +#define CLK_810_ETHA 6 +#define CLK_810_PCIEA 7 +#define CLK_810_NAND 8 + +#endif /* DT_CLOCK_OXSEMI_OX810SE_H */ diff --git a/dts/include/dt-bindings/clock/oxsemi,ox820.h b/dts/include/dt-bindings/clock/oxsemi,ox820.h new file mode 100644 index 0000000000..f661ecc8d7 --- /dev/null +++ b/dts/include/dt-bindings/clock/oxsemi,ox820.h @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef DT_CLOCK_OXSEMI_OX820_H +#define DT_CLOCK_OXSEMI_OX820_H + +/* PLLs */ +#define CLK_820_PLLA 0 +#define CLK_820_PLLB 1 + +/* Gate Clocks */ +#define CLK_820_LEON 2 +#define CLK_820_DMA_SGDMA 3 +#define CLK_820_CIPHER 4 +#define CLK_820_SD 5 +#define CLK_820_SATA 6 +#define CLK_820_AUDIO 7 +#define CLK_820_USBMPH 8 +#define CLK_820_ETHA 9 +#define CLK_820_PCIEA 10 +#define CLK_820_NAND 11 +#define CLK_820_PCIEB 12 +#define CLK_820_ETHB 13 +#define CLK_820_REF600 14 +#define CLK_820_USBDEV 15 + +#endif /* DT_CLOCK_OXSEMI_OX820_H */ diff --git a/dts/include/dt-bindings/clock/qcom,gcc-msm8994.h b/dts/include/dt-bindings/clock/qcom,gcc-msm8994.h new file mode 100644 index 0000000000..8fa535be2e --- /dev/null +++ b/dts/include/dt-bindings/clock/qcom,gcc-msm8994.h @@ -0,0 +1,137 @@ +/* + * Copyright (c) 2016, The Linux Foundation. All rights reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#ifndef _DT_BINDINGS_CLK_MSM_GCC_8994_H +#define _DT_BINDINGS_CLK_MSM_GCC_8994_H + +#define GPLL0_EARLY 0 +#define GPLL0 1 +#define GPLL4_EARLY 2 +#define GPLL4 3 +#define UFS_AXI_CLK_SRC 4 +#define USB30_MASTER_CLK_SRC 5 +#define BLSP1_QUP1_I2C_APPS_CLK_SRC 6 +#define BLSP1_QUP1_SPI_APPS_CLK_SRC 7 +#define BLSP1_QUP2_I2C_APPS_CLK_SRC 8 +#define BLSP1_QUP2_SPI_APPS_CLK_SRC 9 +#define BLSP1_QUP3_I2C_APPS_CLK_SRC 10 +#define BLSP1_QUP3_SPI_APPS_CLK_SRC 11 +#define BLSP1_QUP4_I2C_APPS_CLK_SRC 12 +#define BLSP1_QUP4_SPI_APPS_CLK_SRC 13 +#define BLSP1_QUP5_I2C_APPS_CLK_SRC 14 +#define BLSP1_QUP5_SPI_APPS_CLK_SRC 15 +#define BLSP1_QUP6_I2C_APPS_CLK_SRC 16 +#define BLSP1_QUP6_SPI_APPS_CLK_SRC 17 +#define BLSP1_UART1_APPS_CLK_SRC 18 +#define BLSP1_UART2_APPS_CLK_SRC 19 +#define BLSP1_UART3_APPS_CLK_SRC 20 +#define BLSP1_UART4_APPS_CLK_SRC 21 +#define BLSP1_UART5_APPS_CLK_SRC 22 +#define BLSP1_UART6_APPS_CLK_SRC 23 +#define BLSP2_QUP1_I2C_APPS_CLK_SRC 24 +#define BLSP2_QUP1_SPI_APPS_CLK_SRC 25 +#define BLSP2_QUP2_I2C_APPS_CLK_SRC 26 +#define BLSP2_QUP2_SPI_APPS_CLK_SRC 27 +#define BLSP2_QUP3_I2C_APPS_CLK_SRC 28 +#define BLSP2_QUP3_SPI_APPS_CLK_SRC 29 +#define BLSP2_QUP4_I2C_APPS_CLK_SRC 30 +#define BLSP2_QUP4_SPI_APPS_CLK_SRC 31 +#define BLSP2_QUP5_I2C_APPS_CLK_SRC 32 +#define BLSP2_QUP5_SPI_APPS_CLK_SRC 33 +#define BLSP2_QUP6_I2C_APPS_CLK_SRC 34 +#define BLSP2_QUP6_SPI_APPS_CLK_SRC 35 +#define BLSP2_UART1_APPS_CLK_SRC 36 +#define BLSP2_UART2_APPS_CLK_SRC 37 +#define BLSP2_UART3_APPS_CLK_SRC 38 +#define BLSP2_UART4_APPS_CLK_SRC 39 +#define BLSP2_UART5_APPS_CLK_SRC 40 +#define BLSP2_UART6_APPS_CLK_SRC 41 +#define GP1_CLK_SRC 42 +#define GP2_CLK_SRC 43 +#define GP3_CLK_SRC 44 +#define PCIE_0_AUX_CLK_SRC 45 +#define PCIE_0_PIPE_CLK_SRC 46 +#define PCIE_1_AUX_CLK_SRC 47 +#define PCIE_1_PIPE_CLK_SRC 48 +#define PDM2_CLK_SRC 49 +#define SDCC1_APPS_CLK_SRC 50 +#define SDCC2_APPS_CLK_SRC 51 +#define SDCC3_APPS_CLK_SRC 52 +#define SDCC4_APPS_CLK_SRC 53 +#define TSIF_REF_CLK_SRC 54 +#define USB30_MOCK_UTMI_CLK_SRC 55 +#define USB3_PHY_AUX_CLK_SRC 56 +#define USB_HS_SYSTEM_CLK_SRC 57 +#define GCC_BLSP1_AHB_CLK 58 +#define GCC_BLSP1_QUP1_I2C_APPS_CLK 59 +#define GCC_BLSP1_QUP1_SPI_APPS_CLK 60 +#define GCC_BLSP1_QUP2_I2C_APPS_CLK 61 +#define GCC_BLSP1_QUP2_SPI_APPS_CLK 62 +#define GCC_BLSP1_QUP3_I2C_APPS_CLK 63 +#define GCC_BLSP1_QUP3_SPI_APPS_CLK 64 +#define GCC_BLSP1_QUP4_I2C_APPS_CLK 65 +#define GCC_BLSP1_QUP4_SPI_APPS_CLK 66 +#define GCC_BLSP1_QUP5_I2C_APPS_CLK 67 +#define GCC_BLSP1_QUP5_SPI_APPS_CLK 68 +#define GCC_BLSP1_QUP6_I2C_APPS_CLK 69 +#define GCC_BLSP1_QUP6_SPI_APPS_CLK 70 +#define GCC_BLSP1_UART1_APPS_CLK 71 +#define GCC_BLSP1_UART2_APPS_CLK 72 +#define GCC_BLSP1_UART3_APPS_CLK 73 +#define GCC_BLSP1_UART4_APPS_CLK 74 +#define GCC_BLSP1_UART5_APPS_CLK 75 +#define GCC_BLSP1_UART6_APPS_CLK 76 +#define GCC_BLSP2_AHB_CLK 77 +#define GCC_BLSP2_QUP1_I2C_APPS_CLK 78 +#define GCC_BLSP2_QUP1_SPI_APPS_CLK 79 +#define GCC_BLSP2_QUP2_I2C_APPS_CLK 80 +#define GCC_BLSP2_QUP2_SPI_APPS_CLK 81 +#define GCC_BLSP2_QUP3_I2C_APPS_CLK 82 +#define GCC_BLSP2_QUP3_SPI_APPS_CLK 83 +#define GCC_BLSP2_QUP4_I2C_APPS_CLK 84 +#define GCC_BLSP2_QUP4_SPI_APPS_CLK 85 +#define GCC_BLSP2_QUP5_I2C_APPS_CLK 86 +#define GCC_BLSP2_QUP5_SPI_APPS_CLK 87 +#define GCC_BLSP2_QUP6_I2C_APPS_CLK 88 +#define GCC_BLSP2_QUP6_SPI_APPS_CLK 89 +#define GCC_BLSP2_UART1_APPS_CLK 90 +#define GCC_BLSP2_UART2_APPS_CLK 91 +#define GCC_BLSP2_UART3_APPS_CLK 92 +#define GCC_BLSP2_UART4_APPS_CLK 93 +#define GCC_BLSP2_UART5_APPS_CLK 94 +#define GCC_BLSP2_UART6_APPS_CLK 95 +#define GCC_GP1_CLK 96 +#define GCC_GP2_CLK 97 +#define GCC_GP3_CLK 98 +#define GCC_PCIE_0_AUX_CLK 99 +#define GCC_PCIE_0_PIPE_CLK 100 +#define GCC_PCIE_1_AUX_CLK 101 +#define GCC_PCIE_1_PIPE_CLK 102 +#define GCC_PDM2_CLK 103 +#define GCC_SDCC1_APPS_CLK 104 +#define GCC_SDCC2_APPS_CLK 105 +#define GCC_SDCC3_APPS_CLK 106 +#define GCC_SDCC4_APPS_CLK 107 +#define GCC_SYS_NOC_UFS_AXI_CLK 108 +#define GCC_SYS_NOC_USB3_AXI_CLK 109 +#define GCC_TSIF_REF_CLK 110 +#define GCC_UFS_AXI_CLK 111 +#define GCC_UFS_RX_CFG_CLK 112 +#define GCC_UFS_TX_CFG_CLK 113 +#define GCC_USB30_MASTER_CLK 114 +#define GCC_USB30_MOCK_UTMI_CLK 115 +#define GCC_USB3_PHY_AUX_CLK 116 +#define GCC_USB_HS_SYSTEM_CLK 117 + +#endif diff --git a/dts/include/dt-bindings/clock/qcom,rpmcc.h b/dts/include/dt-bindings/clock/qcom,rpmcc.h new file mode 100644 index 0000000000..5924cdb713 --- /dev/null +++ b/dts/include/dt-bindings/clock/qcom,rpmcc.h @@ -0,0 +1,69 @@ +/* + * Copyright 2015 Linaro Limited + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_CLK_MSM_RPMCC_H +#define _DT_BINDINGS_CLK_MSM_RPMCC_H + +/* apq8064 */ +#define RPM_PXO_CLK 0 +#define RPM_PXO_A_CLK 1 +#define RPM_CXO_CLK 2 +#define RPM_CXO_A_CLK 3 +#define RPM_APPS_FABRIC_CLK 4 +#define RPM_APPS_FABRIC_A_CLK 5 +#define RPM_CFPB_CLK 6 +#define RPM_CFPB_A_CLK 7 +#define RPM_QDSS_CLK 8 +#define RPM_QDSS_A_CLK 9 +#define RPM_DAYTONA_FABRIC_CLK 10 +#define RPM_DAYTONA_FABRIC_A_CLK 11 +#define RPM_EBI1_CLK 12 +#define RPM_EBI1_A_CLK 13 +#define RPM_MM_FABRIC_CLK 14 +#define RPM_MM_FABRIC_A_CLK 15 +#define RPM_MMFPB_CLK 16 +#define RPM_MMFPB_A_CLK 17 +#define RPM_SYS_FABRIC_CLK 18 +#define RPM_SYS_FABRIC_A_CLK 19 +#define RPM_SFPB_CLK 20 +#define RPM_SFPB_A_CLK 21 + +/* msm8916 */ +#define RPM_SMD_XO_CLK_SRC 0 +#define RPM_SMD_XO_A_CLK_SRC 1 +#define RPM_SMD_PCNOC_CLK 2 +#define RPM_SMD_PCNOC_A_CLK 3 +#define RPM_SMD_SNOC_CLK 4 +#define RPM_SMD_SNOC_A_CLK 5 +#define RPM_SMD_BIMC_CLK 6 +#define RPM_SMD_BIMC_A_CLK 7 +#define RPM_SMD_QDSS_CLK 8 +#define RPM_SMD_QDSS_A_CLK 9 +#define RPM_SMD_BB_CLK1 10 +#define RPM_SMD_BB_CLK1_A 11 +#define RPM_SMD_BB_CLK2 12 +#define RPM_SMD_BB_CLK2_A 13 +#define RPM_SMD_RF_CLK1 14 +#define RPM_SMD_RF_CLK1_A 15 +#define RPM_SMD_RF_CLK2 16 +#define RPM_SMD_RF_CLK2_A 17 +#define RPM_SMD_BB_CLK1_PIN 18 +#define RPM_SMD_BB_CLK1_A_PIN 19 +#define RPM_SMD_BB_CLK2_PIN 20 +#define RPM_SMD_BB_CLK2_A_PIN 21 +#define RPM_SMD_RF_CLK1_PIN 22 +#define RPM_SMD_RF_CLK1_A_PIN 23 +#define RPM_SMD_RF_CLK2_PIN 24 +#define RPM_SMD_RF_CLK2_A_PIN 25 + +#endif diff --git a/dts/include/dt-bindings/clock/r7s72100-clock.h b/dts/include/dt-bindings/clock/r7s72100-clock.h index 3cd813896d..29e01ed10e 100644 --- a/dts/include/dt-bindings/clock/r7s72100-clock.h +++ b/dts/include/dt-bindings/clock/r7s72100-clock.h @@ -28,6 +28,9 @@ /* MSTP7 */ #define R7S72100_CLK_ETHER 4 +/* MSTP8 */ +#define R7S72100_CLK_MMCIF 4 + /* MSTP9 */ #define R7S72100_CLK_I2C0 7 #define R7S72100_CLK_I2C1 6 @@ -41,4 +44,8 @@ #define R7S72100_CLK_SPI3 4 #define R7S72100_CLK_SPI4 3 +/* MSTP12 */ +#define R7S72100_CLK_SDHI0 3 +#define R7S72100_CLK_SDHI1 2 + #endif /* __DT_BINDINGS_CLOCK_R7S72100_H__ */ diff --git a/dts/include/dt-bindings/clock/r8a7743-cpg-mssr.h b/dts/include/dt-bindings/clock/r8a7743-cpg-mssr.h new file mode 100644 index 0000000000..e1d1f3c6a9 --- /dev/null +++ b/dts/include/dt-bindings/clock/r8a7743-cpg-mssr.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2016 Cogent Embedded Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __DT_BINDINGS_CLOCK_R8A7743_CPG_MSSR_H__ +#define __DT_BINDINGS_CLOCK_R8A7743_CPG_MSSR_H__ + +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/* r8a7743 CPG Core Clocks */ +#define R8A7743_CLK_Z 0 +#define R8A7743_CLK_ZG 1 +#define R8A7743_CLK_ZTR 2 +#define R8A7743_CLK_ZTRD2 3 +#define R8A7743_CLK_ZT 4 +#define R8A7743_CLK_ZX 5 +#define R8A7743_CLK_ZS 6 +#define R8A7743_CLK_HP 7 +#define R8A7743_CLK_B 9 +#define R8A7743_CLK_LB 10 +#define R8A7743_CLK_P 11 +#define R8A7743_CLK_CL 12 +#define R8A7743_CLK_M2 13 +#define R8A7743_CLK_ZB3 15 +#define R8A7743_CLK_ZB3D2 16 +#define R8A7743_CLK_DDR 17 +#define R8A7743_CLK_SDH 18 +#define R8A7743_CLK_SD0 19 +#define R8A7743_CLK_SD2 20 +#define R8A7743_CLK_SD3 21 +#define R8A7743_CLK_MMC0 22 +#define R8A7743_CLK_MP 23 +#define R8A7743_CLK_QSPI 26 +#define R8A7743_CLK_CP 27 +#define R8A7743_CLK_RCAN 28 +#define R8A7743_CLK_R 29 +#define R8A7743_CLK_OSC 30 + +#endif /* __DT_BINDINGS_CLOCK_R8A7743_CPG_MSSR_H__ */ diff --git a/dts/include/dt-bindings/clock/r8a7745-cpg-mssr.h b/dts/include/dt-bindings/clock/r8a7745-cpg-mssr.h new file mode 100644 index 0000000000..56ad6f0c67 --- /dev/null +++ b/dts/include/dt-bindings/clock/r8a7745-cpg-mssr.h @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2016 Cogent Embedded Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef __DT_BINDINGS_CLOCK_R8A7745_CPG_MSSR_H__ +#define __DT_BINDINGS_CLOCK_R8A7745_CPG_MSSR_H__ + +#include <dt-bindings/clock/renesas-cpg-mssr.h> + +/* r8a7745 CPG Core Clocks */ +#define R8A7745_CLK_Z2 0 +#define R8A7745_CLK_ZG 1 +#define R8A7745_CLK_ZTR 2 +#define R8A7745_CLK_ZTRD2 3 +#define R8A7745_CLK_ZT 4 +#define R8A7745_CLK_ZX 5 +#define R8A7745_CLK_ZS 6 +#define R8A7745_CLK_HP 7 +#define R8A7745_CLK_B 9 +#define R8A7745_CLK_LB 10 +#define R8A7745_CLK_P 11 +#define R8A7745_CLK_CL 12 +#define R8A7745_CLK_CP 13 +#define R8A7745_CLK_M2 14 +#define R8A7745_CLK_ZB3 16 +#define R8A7745_CLK_ZB3D2 17 +#define R8A7745_CLK_DDR 18 +#define R8A7745_CLK_SDH 19 +#define R8A7745_CLK_SD0 20 +#define R8A7745_CLK_SD2 21 +#define R8A7745_CLK_SD3 22 +#define R8A7745_CLK_MMC0 23 +#define R8A7745_CLK_MP 24 +#define R8A7745_CLK_QSPI 25 +#define R8A7745_CLK_CPEX 26 +#define R8A7745_CLK_RCAN 27 +#define R8A7745_CLK_R 28 +#define R8A7745_CLK_OSC 29 + +#endif /* __DT_BINDINGS_CLOCK_R8A7745_CPG_MSSR_H__ */ diff --git a/dts/include/dt-bindings/clock/r8a7794-clock.h b/dts/include/dt-bindings/clock/r8a7794-clock.h index 9d02f5317c..88e64846cf 100644 --- a/dts/include/dt-bindings/clock/r8a7794-clock.h +++ b/dts/include/dt-bindings/clock/r8a7794-clock.h @@ -20,8 +20,7 @@ #define R8A7794_CLK_QSPI 5 #define R8A7794_CLK_SDH 6 #define R8A7794_CLK_SD0 7 -#define R8A7794_CLK_Z 8 -#define R8A7794_CLK_RCAN 9 +#define R8A7794_CLK_RCAN 8 /* MSTP0 */ #define R8A7794_CLK_MSIOF0 0 diff --git a/dts/include/dt-bindings/clock/rk1108-cru.h b/dts/include/dt-bindings/clock/rk1108-cru.h new file mode 100644 index 0000000000..9350a5527a --- /dev/null +++ b/dts/include/dt-bindings/clock/rk1108-cru.h @@ -0,0 +1,269 @@ +/* + * Copyright (c) 2016 Rockchip Electronics Co. Ltd. + * Author: Shawn Lin <shawn.lin@rock-chips.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK1108_H +#define _DT_BINDINGS_CLK_ROCKCHIP_RK1108_H + +/* pll id */ +#define PLL_APLL 0 +#define PLL_DPLL 1 +#define PLL_GPLL 2 +#define ARMCLK 3 + +/* sclk gates (special clocks) */ +#define SCLK_SPI0 65 +#define SCLK_NANDC 67 +#define SCLK_SDMMC 68 +#define SCLK_SDIO 69 +#define SCLK_EMMC 71 +#define SCLK_UART0 72 +#define SCLK_UART1 73 +#define SCLK_UART2 74 +#define SCLK_I2S0 75 +#define SCLK_I2S1 76 +#define SCLK_I2S2 77 +#define SCLK_TIMER0 78 +#define SCLK_TIMER1 79 +#define SCLK_SFC 80 +#define SCLK_SDMMC_DRV 81 +#define SCLK_SDIO_DRV 82 +#define SCLK_EMMC_DRV 83 +#define SCLK_SDMMC_SAMPLE 84 +#define SCLK_SDIO_SAMPLE 85 +#define SCLK_EMMC_SAMPLE 86 + +/* aclk gates */ +#define ACLK_DMAC 192 +#define ACLK_PRE 193 +#define ACLK_CORE 194 +#define ACLK_ENMCORE 195 + +/* pclk gates */ +#define PCLK_GPIO1 256 +#define PCLK_GPIO2 257 +#define PCLK_GPIO3 258 +#define PCLK_GRF 259 +#define PCLK_I2C1 260 +#define PCLK_I2C2 261 +#define PCLK_I2C3 262 +#define PCLK_SPI 263 +#define PCLK_SFC 264 +#define PCLK_UART0 265 +#define PCLK_UART1 266 +#define PCLK_UART2 267 +#define PCLK_TSADC 268 +#define PCLK_PWM 269 +#define PCLK_TIMER 270 +#define PCLK_PERI 271 + +/* hclk gates */ +#define HCLK_I2S0_8CH 320 +#define HCLK_I2S1_8CH 321 +#define HCLK_I2S2_2CH 322 +#define HCLK_NANDC 323 +#define HCLK_SDMMC 324 +#define HCLK_SDIO 325 +#define HCLK_EMMC 326 +#define HCLK_PERI 327 +#define HCLK_SFC 328 + +#define CLK_NR_CLKS (HCLK_SFC + 1) + +/* reset id */ +#define SRST_CORE_PO_AD 0 +#define SRST_CORE_AD 1 +#define SRST_L2_AD 2 +#define SRST_CPU_NIU_AD 3 +#define SRST_CORE_PO 4 +#define SRST_CORE 5 +#define SRST_L2 6 +#define SRST_CORE_DBG 8 +#define PRST_DBG 9 +#define RST_DAP 10 +#define PRST_DBG_NIU 11 +#define ARST_STRC_SYS_AD 15 + +#define SRST_DDRPHY_CLKDIV 16 +#define SRST_DDRPHY 17 +#define PRST_DDRPHY 18 +#define PRST_HDMIPHY 19 +#define PRST_VDACPHY 20 +#define PRST_VADCPHY 21 +#define PRST_MIPI_CSI_PHY 22 +#define PRST_MIPI_DSI_PHY 23 +#define PRST_ACODEC 24 +#define ARST_BUS_NIU 25 +#define PRST_TOP_NIU 26 +#define ARST_INTMEM 27 +#define HRST_ROM 28 +#define ARST_DMAC 29 +#define SRST_MSCH_NIU 30 +#define PRST_MSCH_NIU 31 + +#define PRST_DDRUPCTL 32 +#define NRST_DDRUPCTL 33 +#define PRST_DDRMON 34 +#define HRST_I2S0_8CH 35 +#define MRST_I2S0_8CH 36 +#define HRST_I2S1_2CH 37 +#define MRST_IS21_2CH 38 +#define HRST_I2S2_2CH 39 +#define MRST_I2S2_2CH 40 +#define HRST_CRYPTO 41 +#define SRST_CRYPTO 42 +#define PRST_SPI 43 +#define SRST_SPI 44 +#define PRST_UART0 45 +#define PRST_UART1 46 +#define PRST_UART2 47 + +#define SRST_UART0 48 +#define SRST_UART1 49 +#define SRST_UART2 50 +#define PRST_I2C1 51 +#define PRST_I2C2 52 +#define PRST_I2C3 53 +#define SRST_I2C1 54 +#define SRST_I2C2 55 +#define SRST_I2C3 56 +#define PRST_PWM1 58 +#define SRST_PWM1 60 +#define PRST_WDT 61 +#define PRST_GPIO1 62 +#define PRST_GPIO2 63 + +#define PRST_GPIO3 64 +#define PRST_GRF 65 +#define PRST_EFUSE 66 +#define PRST_EFUSE512 67 +#define PRST_TIMER0 68 +#define SRST_TIMER0 69 +#define SRST_TIMER1 70 +#define PRST_TSADC 71 +#define SRST_TSADC 72 +#define PRST_SARADC 73 +#define SRST_SARADC 74 +#define HRST_SYSBUS 75 +#define PRST_USBGRF 76 + +#define ARST_PERIPH_NIU 80 +#define HRST_PERIPH_NIU 81 +#define PRST_PERIPH_NIU 82 +#define HRST_PERIPH 83 +#define HRST_SDMMC 84 +#define HRST_SDIO 85 +#define HRST_EMMC 86 +#define HRST_NANDC 87 +#define NRST_NANDC 88 +#define HRST_SFC 89 +#define SRST_SFC 90 +#define ARST_GMAC 91 +#define HRST_OTG 92 +#define SRST_OTG 93 +#define SRST_OTG_ADP 94 +#define HRST_HOST0 95 + +#define HRST_HOST0_AUX 96 +#define HRST_HOST0_ARB 97 +#define SRST_HOST0_EHCIPHY 98 +#define SRST_HOST0_UTMI 99 +#define SRST_USBPOR 100 +#define SRST_UTMI0 101 +#define SRST_UTMI1 102 + +#define ARST_VIO0_NIU 102 +#define ARST_VIO1_NIU 103 +#define HRST_VIO_NIU 104 +#define PRST_VIO_NIU 105 +#define ARST_VOP 106 +#define HRST_VOP 107 +#define DRST_VOP 108 +#define ARST_IEP 109 +#define HRST_IEP 110 +#define ARST_RGA 111 +#define HRST_RGA 112 +#define SRST_RGA 113 +#define PRST_CVBS 114 +#define PRST_HDMI 115 +#define SRST_HDMI 116 +#define PRST_MIPI_DSI 117 + +#define ARST_ISP_NIU 118 +#define HRST_ISP_NIU 119 +#define HRST_ISP 120 +#define SRST_ISP 121 +#define ARST_VIP0 122 +#define HRST_VIP0 123 +#define PRST_VIP0 124 +#define ARST_VIP1 125 +#define HRST_VIP1 126 +#define PRST_VIP1 127 +#define ARST_VIP2 128 +#define HRST_VIP2 129 +#define PRST_VIP2 120 +#define ARST_VIP3 121 +#define HRST_VIP3 122 +#define PRST_VIP4 123 + +#define PRST_CIF1TO4 124 +#define SRST_CVBS_CLK 125 +#define HRST_CVBS 126 + +#define ARST_VPU_NIU 140 +#define HRST_VPU_NIU 141 +#define ARST_VPU 142 +#define HRST_VPU 143 +#define ARST_RKVDEC_NIU 144 +#define HRST_RKVDEC_NIU 145 +#define ARST_RKVDEC 146 +#define HRST_RKVDEC 147 +#define SRST_RKVDEC_CABAC 148 +#define SRST_RKVDEC_CORE 149 +#define ARST_RKVENC_NIU 150 +#define HRST_RKVENC_NIU 151 +#define ARST_RKVENC 152 +#define HRST_RKVENC 153 +#define SRST_RKVENC_CORE 154 + +#define SRST_DSP_CORE 156 +#define SRST_DSP_SYS 157 +#define SRST_DSP_GLOBAL 158 +#define SRST_DSP_OECM 159 +#define PRST_DSP_IOP_NIU 160 +#define ARST_DSP_EPP_NIU 161 +#define ARST_DSP_EDP_NIU 162 +#define PRST_DSP_DBG_NIU 163 +#define PRST_DSP_CFG_NIU 164 +#define PRST_DSP_GRF 165 +#define PRST_DSP_MAILBOX 166 +#define PRST_DSP_INTC 167 +#define PRST_DSP_PFM_MON 169 +#define SRST_DSP_PFM_MON 170 +#define ARST_DSP_EDAP_NIU 171 + +#define SRST_PMU 172 +#define SRST_PMU_I2C0 173 +#define PRST_PMU_I2C0 174 +#define PRST_PMU_GPIO0 175 +#define PRST_PMU_INTMEM 176 +#define PRST_PMU_PWM0 177 +#define SRST_PMU_PWM0 178 +#define PRST_PMU_GRF 179 +#define SRST_PMU_NIU 180 +#define SRST_PMU_PVTM 181 +#define ARST_DSP_EDP_PERF 184 +#define ARST_DSP_EPP_PERF 185 + +#endif /* _DT_BINDINGS_CLK_ROCKCHIP_RK1108_H */ diff --git a/dts/include/dt-bindings/clock/rk3188-cru-common.h b/dts/include/dt-bindings/clock/rk3188-cru-common.h index 4f53e70f68..d141c1f0c7 100644 --- a/dts/include/dt-bindings/clock/rk3188-cru-common.h +++ b/dts/include/dt-bindings/clock/rk3188-cru-common.h @@ -72,6 +72,8 @@ #define ACLK_IPP 200 #define ACLK_RGA 201 #define ACLK_CIF0 202 +#define ACLK_CPU 203 +#define ACLK_PERI 204 /* pclk gates */ #define PCLK_GRF 320 @@ -104,6 +106,8 @@ #define PCLK_EFUSE 347 #define PCLK_TZPC 348 #define PCLK_TSADC 349 +#define PCLK_CPU 350 +#define PCLK_PERI 351 /* hclk gates */ #define HCLK_SDMMC 448 @@ -126,8 +130,10 @@ #define HCLK_IPP 465 #define HCLK_RGA 466 #define HCLK_NANDC0 467 +#define HCLK_CPU 468 +#define HCLK_PERI 469 -#define CLK_NR_CLKS (HCLK_NANDC0 + 1) +#define CLK_NR_CLKS (HCLK_PERI + 1) /* soft-reset indices */ #define SRST_MCORE 2 diff --git a/dts/include/dt-bindings/clock/stih415-clks.h b/dts/include/dt-bindings/clock/stih415-clks.h deleted file mode 100644 index d80caa68ae..0000000000 --- a/dts/include/dt-bindings/clock/stih415-clks.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * This header provides constants clk index STMicroelectronics - * STiH415 SoC. - */ -#ifndef _CLK_STIH415 -#define _CLK_STIH415 - -/* CLOCKGEN A0 */ -#define CLK_ICN_REG 0 -#define CLK_ETH1_PHY 4 - -/* CLOCKGEN A1 */ -#define CLK_ICN_IF_2 0 -#define CLK_GMAC0_PHY 3 - -#endif diff --git a/dts/include/dt-bindings/clock/sun50i-a64-ccu.h b/dts/include/dt-bindings/clock/sun50i-a64-ccu.h new file mode 100644 index 0000000000..370c0a0473 --- /dev/null +++ b/dts/include/dt-bindings/clock/sun50i-a64-ccu.h @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_CLK_SUN50I_A64_H_ +#define _DT_BINDINGS_CLK_SUN50I_A64_H_ + +#define CLK_BUS_MIPI_DSI 28 +#define CLK_BUS_CE 29 +#define CLK_BUS_DMA 30 +#define CLK_BUS_MMC0 31 +#define CLK_BUS_MMC1 32 +#define CLK_BUS_MMC2 33 +#define CLK_BUS_NAND 34 +#define CLK_BUS_DRAM 35 +#define CLK_BUS_EMAC 36 +#define CLK_BUS_TS 37 +#define CLK_BUS_HSTIMER 38 +#define CLK_BUS_SPI0 39 +#define CLK_BUS_SPI1 40 +#define CLK_BUS_OTG 41 +#define CLK_BUS_EHCI0 42 +#define CLK_BUS_EHCI1 43 +#define CLK_BUS_OHCI0 44 +#define CLK_BUS_OHCI1 45 +#define CLK_BUS_VE 46 +#define CLK_BUS_TCON0 47 +#define CLK_BUS_TCON1 48 +#define CLK_BUS_DEINTERLACE 49 +#define CLK_BUS_CSI 50 +#define CLK_BUS_HDMI 51 +#define CLK_BUS_DE 52 +#define CLK_BUS_GPU 53 +#define CLK_BUS_MSGBOX 54 +#define CLK_BUS_SPINLOCK 55 +#define CLK_BUS_CODEC 56 +#define CLK_BUS_SPDIF 57 +#define CLK_BUS_PIO 58 +#define CLK_BUS_THS 59 +#define CLK_BUS_I2S0 60 +#define CLK_BUS_I2S1 61 +#define CLK_BUS_I2S2 62 +#define CLK_BUS_I2C0 63 +#define CLK_BUS_I2C1 64 +#define CLK_BUS_I2C2 65 +#define CLK_BUS_SCR 66 +#define CLK_BUS_UART0 67 +#define CLK_BUS_UART1 68 +#define CLK_BUS_UART2 69 +#define CLK_BUS_UART3 70 +#define CLK_BUS_UART4 71 +#define CLK_BUS_DBG 72 +#define CLK_THS 73 +#define CLK_NAND 74 +#define CLK_MMC0 75 +#define CLK_MMC1 76 +#define CLK_MMC2 77 +#define CLK_TS 78 +#define CLK_CE 79 +#define CLK_SPI0 80 +#define CLK_SPI1 81 +#define CLK_I2S0 82 +#define CLK_I2S1 83 +#define CLK_I2S2 84 +#define CLK_SPDIF 85 +#define CLK_USB_PHY0 86 +#define CLK_USB_PHY1 87 +#define CLK_USB_HSIC 88 +#define CLK_USB_HSIC_12M 89 + +#define CLK_USB_OHCI0 91 + +#define CLK_USB_OHCI1 93 + +#define CLK_DRAM_VE 95 +#define CLK_DRAM_CSI 96 +#define CLK_DRAM_DEINTERLACE 97 +#define CLK_DRAM_TS 98 +#define CLK_DE 99 +#define CLK_TCON0 100 +#define CLK_TCON1 101 +#define CLK_DEINTERLACE 102 +#define CLK_CSI_MISC 103 +#define CLK_CSI_SCLK 104 +#define CLK_CSI_MCLK 105 +#define CLK_VE 106 +#define CLK_AC_DIG 107 +#define CLK_AC_DIG_4X 108 +#define CLK_AVS 109 +#define CLK_HDMI 110 +#define CLK_HDMI_DDC 111 + +#define CLK_DSI_DPHY 113 +#define CLK_GPU 114 + +#endif /* _DT_BINDINGS_CLK_SUN50I_H_ */ diff --git a/dts/include/dt-bindings/clock/tegra186-clock.h b/dts/include/dt-bindings/clock/tegra186-clock.h new file mode 100644 index 0000000000..f73d32098f --- /dev/null +++ b/dts/include/dt-bindings/clock/tegra186-clock.h @@ -0,0 +1,940 @@ +/** @file */ + +#ifndef _MACH_T186_CLK_T186_H +#define _MACH_T186_CLK_T186_H + +/** + * @defgroup clock_ids Clock Identifiers + * @{ + * @defgroup extern_input external input clocks + * @{ + * @def TEGRA186_CLK_OSC + * @def TEGRA186_CLK_CLK_32K + * @def TEGRA186_CLK_DTV_INPUT + * @def TEGRA186_CLK_SOR0_PAD_CLKOUT + * @def TEGRA186_CLK_SOR1_PAD_CLKOUT + * @def TEGRA186_CLK_I2S1_SYNC_INPUT + * @def TEGRA186_CLK_I2S2_SYNC_INPUT + * @def TEGRA186_CLK_I2S3_SYNC_INPUT + * @def TEGRA186_CLK_I2S4_SYNC_INPUT + * @def TEGRA186_CLK_I2S5_SYNC_INPUT + * @def TEGRA186_CLK_I2S6_SYNC_INPUT + * @def TEGRA186_CLK_SPDIFIN_SYNC_INPUT + * @} + * + * @defgroup extern_output external output clocks + * @{ + * @def TEGRA186_CLK_EXTPERIPH1 + * @def TEGRA186_CLK_EXTPERIPH2 + * @def TEGRA186_CLK_EXTPERIPH3 + * @def TEGRA186_CLK_EXTPERIPH4 + * @} + * + * @defgroup display_clks display related clocks + * @{ + * @def TEGRA186_CLK_CEC + * @def TEGRA186_CLK_DSIC + * @def TEGRA186_CLK_DSIC_LP + * @def TEGRA186_CLK_DSID + * @def TEGRA186_CLK_DSID_LP + * @def TEGRA186_CLK_DPAUX1 + * @def TEGRA186_CLK_DPAUX + * @def TEGRA186_CLK_HDA2HDMICODEC + * @def TEGRA186_CLK_NVDISPLAY_DISP + * @def TEGRA186_CLK_NVDISPLAY_DSC + * @def TEGRA186_CLK_NVDISPLAY_P0 + * @def TEGRA186_CLK_NVDISPLAY_P1 + * @def TEGRA186_CLK_NVDISPLAY_P2 + * @def TEGRA186_CLK_NVDISPLAYHUB + * @def TEGRA186_CLK_SOR_SAFE + * @def TEGRA186_CLK_SOR0 + * @def TEGRA186_CLK_SOR0_OUT + * @def TEGRA186_CLK_SOR1 + * @def TEGRA186_CLK_SOR1_OUT + * @def TEGRA186_CLK_DSI + * @def TEGRA186_CLK_MIPI_CAL + * @def TEGRA186_CLK_DSIA_LP + * @def TEGRA186_CLK_DSIB + * @def TEGRA186_CLK_DSIB_LP + * @} + * + * @defgroup camera_clks camera related clocks + * @{ + * @def TEGRA186_CLK_NVCSI + * @def TEGRA186_CLK_NVCSILP + * @def TEGRA186_CLK_VI + * @} + * + * @defgroup audio_clks audio related clocks + * @{ + * @def TEGRA186_CLK_ACLK + * @def TEGRA186_CLK_ADSP + * @def TEGRA186_CLK_ADSPNEON + * @def TEGRA186_CLK_AHUB + * @def TEGRA186_CLK_APE + * @def TEGRA186_CLK_APB2APE + * @def TEGRA186_CLK_AUD_MCLK + * @def TEGRA186_CLK_DMIC1 + * @def TEGRA186_CLK_DMIC2 + * @def TEGRA186_CLK_DMIC3 + * @def TEGRA186_CLK_DMIC4 + * @def TEGRA186_CLK_DSPK1 + * @def TEGRA186_CLK_DSPK2 + * @def TEGRA186_CLK_HDA + * @def TEGRA186_CLK_HDA2CODEC_2X + * @def TEGRA186_CLK_I2S1 + * @def TEGRA186_CLK_I2S2 + * @def TEGRA186_CLK_I2S3 + * @def TEGRA186_CLK_I2S4 + * @def TEGRA186_CLK_I2S5 + * @def TEGRA186_CLK_I2S6 + * @def TEGRA186_CLK_MAUD + * @def TEGRA186_CLK_PLL_A_OUT0 + * @def TEGRA186_CLK_SPDIF_DOUBLER + * @def TEGRA186_CLK_SPDIF_IN + * @def TEGRA186_CLK_SPDIF_OUT + * @def TEGRA186_CLK_SYNC_DMIC1 + * @def TEGRA186_CLK_SYNC_DMIC2 + * @def TEGRA186_CLK_SYNC_DMIC3 + * @def TEGRA186_CLK_SYNC_DMIC4 + * @def TEGRA186_CLK_SYNC_DMIC5 + * @def TEGRA186_CLK_SYNC_DSPK1 + * @def TEGRA186_CLK_SYNC_DSPK2 + * @def TEGRA186_CLK_SYNC_I2S1 + * @def TEGRA186_CLK_SYNC_I2S2 + * @def TEGRA186_CLK_SYNC_I2S3 + * @def TEGRA186_CLK_SYNC_I2S4 + * @def TEGRA186_CLK_SYNC_I2S5 + * @def TEGRA186_CLK_SYNC_I2S6 + * @def TEGRA186_CLK_SYNC_SPDIF + * @} + * + * @defgroup uart_clks UART clocks + * @{ + * @def TEGRA186_CLK_AON_UART_FST_MIPI_CAL + * @def TEGRA186_CLK_UARTA + * @def TEGRA186_CLK_UARTB + * @def TEGRA186_CLK_UARTC + * @def TEGRA186_CLK_UARTD + * @def TEGRA186_CLK_UARTE + * @def TEGRA186_CLK_UARTF + * @def TEGRA186_CLK_UARTG + * @def TEGRA186_CLK_UART_FST_MIPI_CAL + * @} + * + * @defgroup i2c_clks I2C clocks + * @{ + * @def TEGRA186_CLK_AON_I2C_SLOW + * @def TEGRA186_CLK_I2C1 + * @def TEGRA186_CLK_I2C2 + * @def TEGRA186_CLK_I2C3 + * @def TEGRA186_CLK_I2C4 + * @def TEGRA186_CLK_I2C5 + * @def TEGRA186_CLK_I2C6 + * @def TEGRA186_CLK_I2C8 + * @def TEGRA186_CLK_I2C9 + * @def TEGRA186_CLK_I2C1 + * @def TEGRA186_CLK_I2C12 + * @def TEGRA186_CLK_I2C13 + * @def TEGRA186_CLK_I2C14 + * @def TEGRA186_CLK_I2C_SLOW + * @def TEGRA186_CLK_VI_I2C + * @} + * + * @defgroup spi_clks SPI clocks + * @{ + * @def TEGRA186_CLK_SPI1 + * @def TEGRA186_CLK_SPI2 + * @def TEGRA186_CLK_SPI3 + * @def TEGRA186_CLK_SPI4 + * @} + * + * @defgroup storage storage related clocks + * @{ + * @def TEGRA186_CLK_SATA + * @def TEGRA186_CLK_SATA_OOB + * @def TEGRA186_CLK_SATA_IOBIST + * @def TEGRA186_CLK_SDMMC_LEGACY_TM + * @def TEGRA186_CLK_SDMMC1 + * @def TEGRA186_CLK_SDMMC2 + * @def TEGRA186_CLK_SDMMC3 + * @def TEGRA186_CLK_SDMMC4 + * @def TEGRA186_CLK_QSPI + * @def TEGRA186_CLK_QSPI_OUT + * @def TEGRA186_CLK_UFSDEV_REF + * @def TEGRA186_CLK_UFSHC + * @} + * + * @defgroup pwm_clks PWM clocks + * @{ + * @def TEGRA186_CLK_PWM1 + * @def TEGRA186_CLK_PWM2 + * @def TEGRA186_CLK_PWM3 + * @def TEGRA186_CLK_PWM4 + * @def TEGRA186_CLK_PWM5 + * @def TEGRA186_CLK_PWM6 + * @def TEGRA186_CLK_PWM7 + * @def TEGRA186_CLK_PWM8 + * @} + * + * @defgroup plls PLLs and related clocks + * @{ + * @def TEGRA186_CLK_PLLREFE_OUT_GATED + * @def TEGRA186_CLK_PLLREFE_OUT1 + * @def TEGRA186_CLK_PLLD_OUT1 + * @def TEGRA186_CLK_PLLP_OUT0 + * @def TEGRA186_CLK_PLLP_OUT5 + * @def TEGRA186_CLK_PLLA + * @def TEGRA186_CLK_PLLE_PWRSEQ + * @def TEGRA186_CLK_PLLA_OUT1 + * @def TEGRA186_CLK_PLLREFE_REF + * @def TEGRA186_CLK_UPHY_PLL0_PWRSEQ + * @def TEGRA186_CLK_UPHY_PLL1_PWRSEQ + * @def TEGRA186_CLK_PLLREFE_PLLE_PASSTHROUGH + * @def TEGRA186_CLK_PLLREFE_PEX + * @def TEGRA186_CLK_PLLREFE_IDDQ + * @def TEGRA186_CLK_PLLC_OUT_AON + * @def TEGRA186_CLK_PLLC_OUT_ISP + * @def TEGRA186_CLK_PLLC_OUT_VE + * @def TEGRA186_CLK_PLLC4_OUT + * @def TEGRA186_CLK_PLLREFE_OUT + * @def TEGRA186_CLK_PLLREFE_PLL_REF + * @def TEGRA186_CLK_PLLE + * @def TEGRA186_CLK_PLLC + * @def TEGRA186_CLK_PLLP + * @def TEGRA186_CLK_PLLD + * @def TEGRA186_CLK_PLLD2 + * @def TEGRA186_CLK_PLLREFE_VCO + * @def TEGRA186_CLK_PLLC2 + * @def TEGRA186_CLK_PLLC3 + * @def TEGRA186_CLK_PLLDP + * @def TEGRA186_CLK_PLLC4_VCO + * @def TEGRA186_CLK_PLLA1 + * @def TEGRA186_CLK_PLLNVCSI + * @def TEGRA186_CLK_PLLDISPHUB + * @def TEGRA186_CLK_PLLD3 + * @def TEGRA186_CLK_PLLBPMPCAM + * @def TEGRA186_CLK_PLLAON + * @def TEGRA186_CLK_PLLU + * @def TEGRA186_CLK_PLLC4_VCO_DIV2 + * @def TEGRA186_CLK_PLL_REF + * @def TEGRA186_CLK_PLLREFE_OUT1_DIV5 + * @def TEGRA186_CLK_UTMIP_PLL_PWRSEQ + * @def TEGRA186_CLK_PLL_U_48M + * @def TEGRA186_CLK_PLL_U_480M + * @def TEGRA186_CLK_PLLC4_OUT0 + * @def TEGRA186_CLK_PLLC4_OUT1 + * @def TEGRA186_CLK_PLLC4_OUT2 + * @def TEGRA186_CLK_PLLC4_OUT_MUX + * @def TEGRA186_CLK_DFLLDISP_DIV + * @def TEGRA186_CLK_PLLDISPHUB_DIV + * @def TEGRA186_CLK_PLLP_DIV8 + * @} + * + * @defgroup nafll_clks NAFLL clock sources + * @{ + * @def TEGRA186_CLK_NAFLL_AXI_CBB + * @def TEGRA186_CLK_NAFLL_BCPU + * @def TEGRA186_CLK_NAFLL_BPMP + * @def TEGRA186_CLK_NAFLL_DISP + * @def TEGRA186_CLK_NAFLL_GPU + * @def TEGRA186_CLK_NAFLL_ISP + * @def TEGRA186_CLK_NAFLL_MCPU + * @def TEGRA186_CLK_NAFLL_NVDEC + * @def TEGRA186_CLK_NAFLL_NVENC + * @def TEGRA186_CLK_NAFLL_NVJPG + * @def TEGRA186_CLK_NAFLL_SCE + * @def TEGRA186_CLK_NAFLL_SE + * @def TEGRA186_CLK_NAFLL_TSEC + * @def TEGRA186_CLK_NAFLL_TSECB + * @def TEGRA186_CLK_NAFLL_VI + * @def TEGRA186_CLK_NAFLL_VIC + * @} + * + * @defgroup mphy MPHY related clocks + * @{ + * @def TEGRA186_CLK_MPHY_L0_RX_SYMB + * @def TEGRA186_CLK_MPHY_L0_RX_LS_BIT + * @def TEGRA186_CLK_MPHY_L0_TX_SYMB + * @def TEGRA186_CLK_MPHY_L0_TX_LS_3XBIT + * @def TEGRA186_CLK_MPHY_L0_RX_ANA + * @def TEGRA186_CLK_MPHY_L1_RX_ANA + * @def TEGRA186_CLK_MPHY_IOBIST + * @def TEGRA186_CLK_MPHY_TX_1MHZ_REF + * @def TEGRA186_CLK_MPHY_CORE_PLL_FIXED + * @} + * + * @defgroup eavb EAVB related clocks + * @{ + * @def TEGRA186_CLK_EQOS_AXI + * @def TEGRA186_CLK_EQOS_PTP_REF + * @def TEGRA186_CLK_EQOS_RX + * @def TEGRA186_CLK_EQOS_RX_INPUT + * @def TEGRA186_CLK_EQOS_TX + * @} + * + * @defgroup usb USB related clocks + * @{ + * @def TEGRA186_CLK_PEX_USB_PAD0_MGMT + * @def TEGRA186_CLK_PEX_USB_PAD1_MGMT + * @def TEGRA186_CLK_HSIC_TRK + * @def TEGRA186_CLK_USB2_TRK + * @def TEGRA186_CLK_USB2_HSIC_TRK + * @def TEGRA186_CLK_XUSB_CORE_SS + * @def TEGRA186_CLK_XUSB_CORE_DEV + * @def TEGRA186_CLK_XUSB_FALCON + * @def TEGRA186_CLK_XUSB_FS + * @def TEGRA186_CLK_XUSB + * @def TEGRA186_CLK_XUSB_DEV + * @def TEGRA186_CLK_XUSB_HOST + * @def TEGRA186_CLK_XUSB_SS + * @} + * + * @defgroup bigblock compute block related clocks + * @{ + * @def TEGRA186_CLK_GPCCLK + * @def TEGRA186_CLK_GPC2CLK + * @def TEGRA186_CLK_GPU + * @def TEGRA186_CLK_HOST1X + * @def TEGRA186_CLK_ISP + * @def TEGRA186_CLK_NVDEC + * @def TEGRA186_CLK_NVENC + * @def TEGRA186_CLK_NVJPG + * @def TEGRA186_CLK_SE + * @def TEGRA186_CLK_TSEC + * @def TEGRA186_CLK_TSECB + * @def TEGRA186_CLK_VIC + * @} + * + * @defgroup can CAN bus related clocks + * @{ + * @def TEGRA186_CLK_CAN1 + * @def TEGRA186_CLK_CAN1_HOST + * @def TEGRA186_CLK_CAN2 + * @def TEGRA186_CLK_CAN2_HOST + * @} + * + * @defgroup system basic system clocks + * @{ + * @def TEGRA186_CLK_ACTMON + * @def TEGRA186_CLK_AON_APB + * @def TEGRA186_CLK_AON_CPU_NIC + * @def TEGRA186_CLK_AON_NIC + * @def TEGRA186_CLK_AXI_CBB + * @def TEGRA186_CLK_BPMP_APB + * @def TEGRA186_CLK_BPMP_CPU_NIC + * @def TEGRA186_CLK_BPMP_NIC_RATE + * @def TEGRA186_CLK_CLK_M + * @def TEGRA186_CLK_EMC + * @def TEGRA186_CLK_MSS_ENCRYPT + * @def TEGRA186_CLK_SCE_APB + * @def TEGRA186_CLK_SCE_CPU_NIC + * @def TEGRA186_CLK_SCE_NIC + * @def TEGRA186_CLK_TSC + * @} + * + * @defgroup pcie_clks PCIe related clocks + * @{ + * @def TEGRA186_CLK_AFI + * @def TEGRA186_CLK_PCIE + * @def TEGRA186_CLK_PCIE2_IOBIST + * @def TEGRA186_CLK_PCIERX0 + * @def TEGRA186_CLK_PCIERX1 + * @def TEGRA186_CLK_PCIERX2 + * @def TEGRA186_CLK_PCIERX3 + * @def TEGRA186_CLK_PCIERX4 + * @} + */ + +/** @brief output of gate CLK_ENB_FUSE */ +#define TEGRA186_CLK_FUSE 0 +/** + * @brief It's not what you think + * @details output of gate CLK_ENB_GPU. This output connects to the GPU + * pwrclk. @warning: This is almost certainly not the clock you think + * it is. If you're looking for the clock of the graphics engine, see + * TEGRA186_GPCCLK + */ +#define TEGRA186_CLK_GPU 1 +/** @brief output of gate CLK_ENB_PCIE */ +#define TEGRA186_CLK_PCIE 3 +/** @brief output of the divider IPFS_CLK_DIVISOR */ +#define TEGRA186_CLK_AFI 4 +/** @brief output of gate CLK_ENB_PCIE2_IOBIST */ +#define TEGRA186_CLK_PCIE2_IOBIST 5 +/** @brief output of gate CLK_ENB_PCIERX0*/ +#define TEGRA186_CLK_PCIERX0 6 +/** @brief output of gate CLK_ENB_PCIERX1*/ +#define TEGRA186_CLK_PCIERX1 7 +/** @brief output of gate CLK_ENB_PCIERX2*/ +#define TEGRA186_CLK_PCIERX2 8 +/** @brief output of gate CLK_ENB_PCIERX3*/ +#define TEGRA186_CLK_PCIERX3 9 +/** @brief output of gate CLK_ENB_PCIERX4*/ +#define TEGRA186_CLK_PCIERX4 10 +/** @brief output branch of PLL_C for ISP, controlled by gate CLK_ENB_PLLC_OUT_ISP */ +#define TEGRA186_CLK_PLLC_OUT_ISP 11 +/** @brief output branch of PLL_C for VI, controlled by gate CLK_ENB_PLLC_OUT_VE */ +#define TEGRA186_CLK_PLLC_OUT_VE 12 +/** @brief output branch of PLL_C for AON domain, controlled by gate CLK_ENB_PLLC_OUT_AON */ +#define TEGRA186_CLK_PLLC_OUT_AON 13 +/** @brief output of gate CLK_ENB_SOR_SAFE */ +#define TEGRA186_CLK_SOR_SAFE 39 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S2 */ +#define TEGRA186_CLK_I2S2 42 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S3 */ +#define TEGRA186_CLK_I2S3 43 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPDF_IN */ +#define TEGRA186_CLK_SPDIF_IN 44 +/** @brief output of gate CLK_ENB_SPDIF_DOUBLER */ +#define TEGRA186_CLK_SPDIF_DOUBLER 45 +/** @clkdesc{spi_clks, out, mux, CLK_RST_CONTROLLER_CLK_SOURCE_SPI3} */ +#define TEGRA186_CLK_SPI3 46 +/** @clkdesc{i2c_clks, out, mux, CLK_RST_CONTROLLER_CLK_SOURCE_I2C1} */ +#define TEGRA186_CLK_I2C1 47 +/** @clkdesc{i2c_clks, out, mux, CLK_RST_CONTROLLER_CLK_SOURCE_I2C5} */ +#define TEGRA186_CLK_I2C5 48 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI1 */ +#define TEGRA186_CLK_SPI1 49 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_ISP */ +#define TEGRA186_CLK_ISP 50 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VI */ +#define TEGRA186_CLK_VI 51 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC1 */ +#define TEGRA186_CLK_SDMMC1 52 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC2 */ +#define TEGRA186_CLK_SDMMC2 53 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC4 */ +#define TEGRA186_CLK_SDMMC4 54 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTA */ +#define TEGRA186_CLK_UARTA 55 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTB */ +#define TEGRA186_CLK_UARTB 56 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X */ +#define TEGRA186_CLK_HOST1X 57 +/** + * @brief controls the EMC clock frequency. + * @details Doing a clk_set_rate on this clock will select the + * appropriate clock source, program the source rate and execute a + * specific sequence to switch to the new clock source for both memory + * controllers. This can be used to control the balance between memory + * throughput and memory controller power. + */ +#define TEGRA186_CLK_EMC 58 +/* @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH4 */ +#define TEGRA186_CLK_EXTPERIPH4 73 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI4 */ +#define TEGRA186_CLK_SPI4 74 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C3 */ +#define TEGRA186_CLK_I2C3 75 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC3 */ +#define TEGRA186_CLK_SDMMC3 76 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTD */ +#define TEGRA186_CLK_UARTD 77 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S1 */ +#define TEGRA186_CLK_I2S1 79 +/** output of gate CLK_ENB_DTV */ +#define TEGRA186_CLK_DTV 80 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TSEC */ +#define TEGRA186_CLK_TSEC 81 +/** @brief output of gate CLK_ENB_DP2 */ +#define TEGRA186_CLK_DP2 82 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S4 */ +#define TEGRA186_CLK_I2S4 84 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S5 */ +#define TEGRA186_CLK_I2S5 85 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C4 */ +#define TEGRA186_CLK_I2C4 86 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AHUB */ +#define TEGRA186_CLK_AHUB 87 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HDA2CODEC_2X */ +#define TEGRA186_CLK_HDA2CODEC_2X 88 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH1 */ +#define TEGRA186_CLK_EXTPERIPH1 89 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH2 */ +#define TEGRA186_CLK_EXTPERIPH2 90 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH3 */ +#define TEGRA186_CLK_EXTPERIPH3 91 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C_SLOW */ +#define TEGRA186_CLK_I2C_SLOW 92 +/** @brief output of the SOR1_CLK_SRC mux in CLK_RST_CONTROLLER_CLK_SOURCE_SOR1 */ +#define TEGRA186_CLK_SOR1 93 +/** @brief output of gate CLK_ENB_CEC */ +#define TEGRA186_CLK_CEC 94 +/** @brief output of gate CLK_ENB_DPAUX1 */ +#define TEGRA186_CLK_DPAUX1 95 +/** @brief output of gate CLK_ENB_DPAUX */ +#define TEGRA186_CLK_DPAUX 96 +/** @brief output of the SOR0_CLK_SRC mux in CLK_RST_CONTROLLER_CLK_SOURCE_SOR0 */ +#define TEGRA186_CLK_SOR0 97 +/** @brief output of gate CLK_ENB_HDA2HDMICODEC */ +#define TEGRA186_CLK_HDA2HDMICODEC 98 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SATA */ +#define TEGRA186_CLK_SATA 99 +/** @brief output of gate CLK_ENB_SATA_OOB */ +#define TEGRA186_CLK_SATA_OOB 100 +/** @brief output of gate CLK_ENB_SATA_IOBIST */ +#define TEGRA186_CLK_SATA_IOBIST 101 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HDA */ +#define TEGRA186_CLK_HDA 102 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SE */ +#define TEGRA186_CLK_SE 103 +/** @brief output of gate CLK_ENB_APB2APE */ +#define TEGRA186_CLK_APB2APE 104 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_APE */ +#define TEGRA186_CLK_APE 105 +/** @brief output of gate CLK_ENB_IQC1 */ +#define TEGRA186_CLK_IQC1 106 +/** @brief output of gate CLK_ENB_IQC2 */ +#define TEGRA186_CLK_IQC2 107 +/** divide by 2 version of TEGRA186_CLK_PLLREFE_VCO */ +#define TEGRA186_CLK_PLLREFE_OUT 108 +/** @brief output of gate CLK_ENB_PLLREFE_PLL_REF */ +#define TEGRA186_CLK_PLLREFE_PLL_REF 109 +/** @brief output of gate CLK_ENB_PLLC4_OUT */ +#define TEGRA186_CLK_PLLC4_OUT 110 +/** @brief output of mux xusb_core_clk_switch on page 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB 111 +/** controls xusb_dev_ce signal on page 66 and 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_DEV 112 +/** controls xusb_host_ce signal on page 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_HOST 113 +/** controls xusb_ss_ce signal on page 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_SS 114 +/** @brief output of gate CLK_ENB_DSI */ +#define TEGRA186_CLK_DSI 115 +/** @brief output of gate CLK_ENB_MIPI_CAL */ +#define TEGRA186_CLK_MIPI_CAL 116 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSIA_LP */ +#define TEGRA186_CLK_DSIA_LP 117 +/** @brief output of gate CLK_ENB_DSIB */ +#define TEGRA186_CLK_DSIB 118 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSIB_LP */ +#define TEGRA186_CLK_DSIB_LP 119 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC1 */ +#define TEGRA186_CLK_DMIC1 122 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC2 */ +#define TEGRA186_CLK_DMIC2 123 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AUD_MCLK */ +#define TEGRA186_CLK_AUD_MCLK 124 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C6 */ +#define TEGRA186_CLK_I2C6 125 +/**output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UART_FST_MIPI_CAL */ +#define TEGRA186_CLK_UART_FST_MIPI_CAL 126 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VIC */ +#define TEGRA186_CLK_VIC 127 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC_LEGACY_TM */ +#define TEGRA186_CLK_SDMMC_LEGACY_TM 128 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDEC */ +#define TEGRA186_CLK_NVDEC 129 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVJPG */ +#define TEGRA186_CLK_NVJPG 130 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVENC */ +#define TEGRA186_CLK_NVENC 131 +/** @brief output of the QSPI_CLK_SRC mux in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI */ +#define TEGRA186_CLK_QSPI 132 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VI_I2C */ +#define TEGRA186_CLK_VI_I2C 133 +/** @brief output of gate CLK_ENB_HSIC_TRK */ +#define TEGRA186_CLK_HSIC_TRK 134 +/** @brief output of gate CLK_ENB_USB2_TRK */ +#define TEGRA186_CLK_USB2_TRK 135 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_MAUD */ +#define TEGRA186_CLK_MAUD 136 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TSECB */ +#define TEGRA186_CLK_TSECB 137 +/** @brief output of gate CLK_ENB_ADSP */ +#define TEGRA186_CLK_ADSP 138 +/** @brief output of gate CLK_ENB_ADSPNEON */ +#define TEGRA186_CLK_ADSPNEON 139 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_L0_RX_LS_SYMB */ +#define TEGRA186_CLK_MPHY_L0_RX_SYMB 140 +/** @brief output of gate CLK_ENB_MPHY_L0_RX_LS_BIT */ +#define TEGRA186_CLK_MPHY_L0_RX_LS_BIT 141 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_L0_TX_LS_SYMB */ +#define TEGRA186_CLK_MPHY_L0_TX_SYMB 142 +/** @brief output of gate CLK_ENB_MPHY_L0_TX_LS_3XBIT */ +#define TEGRA186_CLK_MPHY_L0_TX_LS_3XBIT 143 +/** @brief output of gate CLK_ENB_MPHY_L0_RX_ANA */ +#define TEGRA186_CLK_MPHY_L0_RX_ANA 144 +/** @brief output of gate CLK_ENB_MPHY_L1_RX_ANA */ +#define TEGRA186_CLK_MPHY_L1_RX_ANA 145 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_IOBIST */ +#define TEGRA186_CLK_MPHY_IOBIST 146 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_TX_1MHZ_REF */ +#define TEGRA186_CLK_MPHY_TX_1MHZ_REF 147 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_CORE_PLL_FIXED */ +#define TEGRA186_CLK_MPHY_CORE_PLL_FIXED 148 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AXI_CBB */ +#define TEGRA186_CLK_AXI_CBB 149 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC3 */ +#define TEGRA186_CLK_DMIC3 150 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC4 */ +#define TEGRA186_CLK_DMIC4 151 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSPK1 */ +#define TEGRA186_CLK_DSPK1 152 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSPK2 */ +#define TEGRA186_CLK_DSPK2 153 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C6 */ +#define TEGRA186_CLK_I2S6 154 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_P0 */ +#define TEGRA186_CLK_NVDISPLAY_P0 155 +/** @brief output of the NVDISPLAY_DISP_CLK_SRC mux in CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_DISP */ +#define TEGRA186_CLK_NVDISPLAY_DISP 156 +/** @brief output of gate CLK_ENB_NVDISPLAY_DSC */ +#define TEGRA186_CLK_NVDISPLAY_DSC 157 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAYHUB */ +#define TEGRA186_CLK_NVDISPLAYHUB 158 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_P1 */ +#define TEGRA186_CLK_NVDISPLAY_P1 159 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_P2 */ +#define TEGRA186_CLK_NVDISPLAY_P2 160 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TACH */ +#define TEGRA186_CLK_TACH 166 +/** @brief output of gate CLK_ENB_EQOS */ +#define TEGRA186_CLK_EQOS_AXI 167 +/** @brief output of gate CLK_ENB_EQOS_RX */ +#define TEGRA186_CLK_EQOS_RX 168 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UFSHC_CG_SYS */ +#define TEGRA186_CLK_UFSHC 178 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UFSDEV_REF */ +#define TEGRA186_CLK_UFSDEV_REF 179 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVCSI */ +#define TEGRA186_CLK_NVCSI 180 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVCSILP */ +#define TEGRA186_CLK_NVCSILP 181 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C7 */ +#define TEGRA186_CLK_I2C7 182 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C9 */ +#define TEGRA186_CLK_I2C9 183 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C12 */ +#define TEGRA186_CLK_I2C12 184 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C13 */ +#define TEGRA186_CLK_I2C13 185 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C14 */ +#define TEGRA186_CLK_I2C14 186 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM1 */ +#define TEGRA186_CLK_PWM1 187 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM2 */ +#define TEGRA186_CLK_PWM2 188 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM3 */ +#define TEGRA186_CLK_PWM3 189 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM5 */ +#define TEGRA186_CLK_PWM5 190 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM6 */ +#define TEGRA186_CLK_PWM6 191 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM7 */ +#define TEGRA186_CLK_PWM7 192 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM8 */ +#define TEGRA186_CLK_PWM8 193 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTE */ +#define TEGRA186_CLK_UARTE 194 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTF */ +#define TEGRA186_CLK_UARTF 195 +/** @deprecated */ +#define TEGRA186_CLK_DBGAPB 196 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_BPMP_CPU_NIC */ +#define TEGRA186_CLK_BPMP_CPU_NIC 197 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_BPMP_APB */ +#define TEGRA186_CLK_BPMP_APB 199 +/** @brief output of mux controlled by TEGRA186_CLK_SOC_ACTMON */ +#define TEGRA186_CLK_ACTMON 201 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_CPU_NIC */ +#define TEGRA186_CLK_AON_CPU_NIC 208 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_CAN1 */ +#define TEGRA186_CLK_CAN1 210 +/** @brief output of gate CLK_ENB_CAN1_HOST */ +#define TEGRA186_CLK_CAN1_HOST 211 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_CAN2 */ +#define TEGRA186_CLK_CAN2 212 +/** @brief output of gate CLK_ENB_CAN2_HOST */ +#define TEGRA186_CLK_CAN2_HOST 213 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_APB */ +#define TEGRA186_CLK_AON_APB 214 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTC */ +#define TEGRA186_CLK_UARTC 215 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTG */ +#define TEGRA186_CLK_UARTG 216 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_UART_FST_MIPI_CAL */ +#define TEGRA186_CLK_AON_UART_FST_MIPI_CAL 217 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C2 */ +#define TEGRA186_CLK_I2C2 218 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C8 */ +#define TEGRA186_CLK_I2C8 219 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C10 */ +#define TEGRA186_CLK_I2C10 220 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_I2C_SLOW */ +#define TEGRA186_CLK_AON_I2C_SLOW 221 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI2 */ +#define TEGRA186_CLK_SPI2 222 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC5 */ +#define TEGRA186_CLK_DMIC5 223 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_TOUCH */ +#define TEGRA186_CLK_AON_TOUCH 224 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM4 */ +#define TEGRA186_CLK_PWM4 225 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TSC. This clock object is read only and is used for all timers in the system. */ +#define TEGRA186_CLK_TSC 226 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_MSS_ENCRYPT */ +#define TEGRA186_CLK_MSS_ENCRYPT 227 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SCE_CPU_NIC */ +#define TEGRA186_CLK_SCE_CPU_NIC 228 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SCE_APB */ +#define TEGRA186_CLK_SCE_APB 230 +/** @brief output of gate CLK_ENB_DSIC */ +#define TEGRA186_CLK_DSIC 231 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSIC_LP */ +#define TEGRA186_CLK_DSIC_LP 232 +/** @brief output of gate CLK_ENB_DSID */ +#define TEGRA186_CLK_DSID 233 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSID_LP */ +#define TEGRA186_CLK_DSID_LP 234 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_PEX_SATA_USB_RX_BYP */ +#define TEGRA186_CLK_PEX_SATA_USB_RX_BYP 236 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPDIF_OUT */ +#define TEGRA186_CLK_SPDIF_OUT 238 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_EQOS_PTP_REF_CLK_0 */ +#define TEGRA186_CLK_EQOS_PTP_REF 239 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_EQOS_TX_CLK */ +#define TEGRA186_CLK_EQOS_TX 240 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_USB2_HSIC_TRK */ +#define TEGRA186_CLK_USB2_HSIC_TRK 241 +/** @brief output of mux xusb_ss_clk_switch on page 66 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_CORE_SS 242 +/** @brief output of mux xusb_core_dev_clk_switch on page 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_CORE_DEV 243 +/** @brief output of mux xusb_core_falcon_clk_switch on page 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_FALCON 244 +/** @brief output of mux xusb_fs_clk_switch on page 66 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_FS 245 +/** @brief output of the divider CLK_RST_CONTROLLER_PLLA_OUT */ +#define TEGRA186_CLK_PLL_A_OUT0 246 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S1 */ +#define TEGRA186_CLK_SYNC_I2S1 247 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S2 */ +#define TEGRA186_CLK_SYNC_I2S2 248 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S3 */ +#define TEGRA186_CLK_SYNC_I2S3 249 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S4 */ +#define TEGRA186_CLK_SYNC_I2S4 250 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S5 */ +#define TEGRA186_CLK_SYNC_I2S5 251 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S6 */ +#define TEGRA186_CLK_SYNC_I2S6 252 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DSPK1 */ +#define TEGRA186_CLK_SYNC_DSPK1 253 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DSPK2 */ +#define TEGRA186_CLK_SYNC_DSPK2 254 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC1 */ +#define TEGRA186_CLK_SYNC_DMIC1 255 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC2 */ +#define TEGRA186_CLK_SYNC_DMIC2 256 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC3 */ +#define TEGRA186_CLK_SYNC_DMIC3 257 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC4 */ +#define TEGRA186_CLK_SYNC_DMIC4 259 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_SPDIF */ +#define TEGRA186_CLK_SYNC_SPDIF 260 +/** @brief output of gate CLK_ENB_PLLREFE_OUT */ +#define TEGRA186_CLK_PLLREFE_OUT_GATED 261 +/** @brief output of the divider PLLREFE_DIVP in CLK_RST_CONTROLLER_PLLREFE_BASE. PLLREFE has 2 outputs: + * * VCO/pdiv defined by this clock object + * * VCO/2 defined by TEGRA186_CLK_PLLREFE_OUT + */ +#define TEGRA186_CLK_PLLREFE_OUT1 262 +#define TEGRA186_CLK_PLLD_OUT1 267 +/** @brief output of the divider PLLP_DIVP in CLK_RST_CONTROLLER_PLLP_BASE */ +#define TEGRA186_CLK_PLLP_OUT0 269 +/** @brief output of the divider CLK_RST_CONTROLLER_PLLP_OUTC */ +#define TEGRA186_CLK_PLLP_OUT5 270 +/** PLL controlled by CLK_RST_CONTROLLER_PLLA_BASE for use by audio clocks */ +#define TEGRA186_CLK_PLLA 271 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_ACLK_BURST_POLICY divided by the divider controlled by ACLK_CLK_DIVISOR in CLK_RST_CONTROLLER_SUPER_ACLK_DIVIDER */ +#define TEGRA186_CLK_ACLK 273 +/** fixed 48MHz clock divided down from TEGRA186_CLK_PLL_U */ +#define TEGRA186_CLK_PLL_U_48M 274 +/** fixed 480MHz clock divided down from TEGRA186_CLK_PLL_U */ +#define TEGRA186_CLK_PLL_U_480M 275 +/** @brief output of the divider PLLC4_DIVP in CLK_RST_CONTROLLER_PLLC4_BASE. Output frequency is TEGRA186_CLK_PLLC4_VCO/PLLC4_DIVP */ +#define TEGRA186_CLK_PLLC4_OUT0 276 +/** fixed /3 divider. Output frequency of this clock is TEGRA186_CLK_PLLC4_VCO/3 */ +#define TEGRA186_CLK_PLLC4_OUT1 277 +/** fixed /5 divider. Output frequency of this clock is TEGRA186_CLK_PLLC4_VCO/5 */ +#define TEGRA186_CLK_PLLC4_OUT2 278 +/** @brief output of mux controlled by PLLC4_CLK_SEL in CLK_RST_CONTROLLER_PLLC4_MISC1 */ +#define TEGRA186_CLK_PLLC4_OUT_MUX 279 +/** @brief output of divider NVDISPLAY_DISP_CLK_DIVISOR in CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_DISP when DFLLDISP_DIV is selected in NVDISPLAY_DISP_CLK_SRC */ +#define TEGRA186_CLK_DFLLDISP_DIV 284 +/** @brief output of divider NVDISPLAY_DISP_CLK_DIVISOR in CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_DISP when PLLDISPHUB_DIV is selected in NVDISPLAY_DISP_CLK_SRC */ +#define TEGRA186_CLK_PLLDISPHUB_DIV 285 +/** fixed /8 divider which is used as the input for TEGRA186_CLK_SOR_SAFE */ +#define TEGRA186_CLK_PLLP_DIV8 286 +/** @brief output of divider CLK_RST_CONTROLLER_BPMP_NIC_RATE */ +#define TEGRA186_CLK_BPMP_NIC 287 +/** @brief output of the divider CLK_RST_CONTROLLER_PLLA1_OUT1 */ +#define TEGRA186_CLK_PLL_A_OUT1 288 +/** @deprecated */ +#define TEGRA186_CLK_GPC2CLK 289 +/** A fake clock which must be enabled during KFUSE read operations to ensure adequate VDD_CORE voltage. */ +#define TEGRA186_CLK_KFUSE 293 +/** + * @brief controls the PLLE hardware sequencer. + * @details This clock only has enable and disable methods. When the + * PLLE hw sequencer is enabled, PLLE, will be enabled or disabled by + * hw based on the control signals from the PCIe, SATA and XUSB + * clocks. When the PLLE hw sequencer is disabled, the state of PLLE + * is controlled by sw using clk_enable/clk_disable on + * TEGRA186_CLK_PLLE. + */ +#define TEGRA186_CLK_PLLE_PWRSEQ 294 +/** fixed 60MHz clock divided down from, TEGRA186_CLK_PLL_U */ +#define TEGRA186_CLK_PLLREFE_REF 295 +/** @brief output of mux controlled by SOR0_CLK_SEL0 and SOR0_CLK_SEL1 in CLK_RST_CONTROLLER_CLK_SOURCE_SOR0 */ +#define TEGRA186_CLK_SOR0_OUT 296 +/** @brief output of mux controlled by SOR1_CLK_SEL0 and SOR1_CLK_SEL1 in CLK_RST_CONTROLLER_CLK_SOURCE_SOR1 */ +#define TEGRA186_CLK_SOR1_OUT 297 +/** @brief fixed /5 divider. Output frequency of this clock is TEGRA186_CLK_PLLREFE_OUT1/5. Used as input for TEGRA186_CLK_EQOS_AXI */ +#define TEGRA186_CLK_PLLREFE_OUT1_DIV5 298 +/** @brief controls the UTMIP_PLL (aka PLLU) hardware sqeuencer */ +#define TEGRA186_CLK_UTMIP_PLL_PWRSEQ 301 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_PEX_USB_PAD_PLL0_MGMT */ +#define TEGRA186_CLK_PEX_USB_PAD0_MGMT 302 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_PEX_USB_PAD_PLL1_MGMT */ +#define TEGRA186_CLK_PEX_USB_PAD1_MGMT 303 +/** @brief controls the UPHY_PLL0 hardware sqeuencer */ +#define TEGRA186_CLK_UPHY_PLL0_PWRSEQ 304 +/** @brief controls the UPHY_PLL1 hardware sqeuencer */ +#define TEGRA186_CLK_UPHY_PLL1_PWRSEQ 305 +/** @brief control for PLLREFE_IDDQ in CLK_RST_CONTROLLER_PLLREFE_MISC so the bypass output even be used when the PLL is disabled */ +#define TEGRA186_CLK_PLLREFE_PLLE_PASSTHROUGH 306 +/** @brief output of the mux controlled by PLLREFE_SEL_CLKIN_PEX in CLK_RST_CONTROLLER_PLLREFE_MISC */ +#define TEGRA186_CLK_PLLREFE_PEX 307 +/** @brief control for PLLREFE_IDDQ in CLK_RST_CONTROLLER_PLLREFE_MISC to turn on the PLL when enabled */ +#define TEGRA186_CLK_PLLREFE_IDDQ 308 +/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI */ +#define TEGRA186_CLK_QSPI_OUT 309 +/** + * @brief GPC2CLK-div-2 + * @details fixed /2 divider. Output frequency is + * TEGRA186_CLK_GPC2CLK/2. The frequency of this clock is the + * frequency at which the GPU graphics engine runs. */ +#define TEGRA186_CLK_GPCCLK 310 +/** @brief output of divider CLK_RST_CONTROLLER_AON_NIC_RATE */ +#define TEGRA186_CLK_AON_NIC 450 +/** @brief output of divider CLK_RST_CONTROLLER_SCE_NIC_RATE */ +#define TEGRA186_CLK_SCE_NIC 451 +/** Fixed 100MHz PLL for PCIe, SATA and superspeed USB */ +#define TEGRA186_CLK_PLLE 512 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC_BASE */ +#define TEGRA186_CLK_PLLC 513 +/** Fixed 408MHz PLL for use by peripheral clocks */ +#define TEGRA186_CLK_PLLP 516 +/** @deprecated */ +#define TEGRA186_CLK_PLL_P TEGRA186_CLK_PLLP +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLD_BASE for use by DSI */ +#define TEGRA186_CLK_PLLD 518 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLD2_BASE for use by HDMI or DP */ +#define TEGRA186_CLK_PLLD2 519 +/** + * @brief PLL controlled by CLK_RST_CONTROLLER_PLLREFE_BASE. + * @details Note that this clock only controls the VCO output, before + * the post-divider. See TEGRA186_CLK_PLLREFE_OUT1 for more + * information. + */ +#define TEGRA186_CLK_PLLREFE_VCO 520 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC2_BASE */ +#define TEGRA186_CLK_PLLC2 521 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC3_BASE */ +#define TEGRA186_CLK_PLLC3 522 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLDP_BASE for use as the DP link clock */ +#define TEGRA186_CLK_PLLDP 523 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC4_BASE */ +#define TEGRA186_CLK_PLLC4_VCO 524 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLA1_BASE for use by audio clocks */ +#define TEGRA186_CLK_PLLA1 525 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLNVCSI_BASE */ +#define TEGRA186_CLK_PLLNVCSI 526 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLDISPHUB_BASE */ +#define TEGRA186_CLK_PLLDISPHUB 527 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLD3_BASE for use by HDMI or DP */ +#define TEGRA186_CLK_PLLD3 528 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLBPMPCAM_BASE */ +#define TEGRA186_CLK_PLLBPMPCAM 531 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLAON_BASE for use by IP blocks in the AON domain */ +#define TEGRA186_CLK_PLLAON 532 +/** Fixed frequency 960MHz PLL for USB and EAVB */ +#define TEGRA186_CLK_PLLU 533 +/** fixed /2 divider. Output frequency is TEGRA186_CLK_PLLC4_VCO/2 */ +#define TEGRA186_CLK_PLLC4_VCO_DIV2 535 +/** @brief NAFLL clock source for AXI_CBB */ +#define TEGRA186_CLK_NAFLL_AXI_CBB 564 +/** @brief NAFLL clock source for BPMP */ +#define TEGRA186_CLK_NAFLL_BPMP 565 +/** @brief NAFLL clock source for ISP */ +#define TEGRA186_CLK_NAFLL_ISP 566 +/** @brief NAFLL clock source for NVDEC */ +#define TEGRA186_CLK_NAFLL_NVDEC 567 +/** @brief NAFLL clock source for NVENC */ +#define TEGRA186_CLK_NAFLL_NVENC 568 +/** @brief NAFLL clock source for NVJPG */ +#define TEGRA186_CLK_NAFLL_NVJPG 569 +/** @brief NAFLL clock source for SCE */ +#define TEGRA186_CLK_NAFLL_SCE 570 +/** @brief NAFLL clock source for SE */ +#define TEGRA186_CLK_NAFLL_SE 571 +/** @brief NAFLL clock source for TSEC */ +#define TEGRA186_CLK_NAFLL_TSEC 572 +/** @brief NAFLL clock source for TSECB */ +#define TEGRA186_CLK_NAFLL_TSECB 573 +/** @brief NAFLL clock source for VI */ +#define TEGRA186_CLK_NAFLL_VI 574 +/** @brief NAFLL clock source for VIC */ +#define TEGRA186_CLK_NAFLL_VIC 575 +/** @brief NAFLL clock source for DISP */ +#define TEGRA186_CLK_NAFLL_DISP 576 +/** @brief NAFLL clock source for GPU */ +#define TEGRA186_CLK_NAFLL_GPU 577 +/** @brief NAFLL clock source for M-CPU cluster */ +#define TEGRA186_CLK_NAFLL_MCPU 578 +/** @brief NAFLL clock source for B-CPU cluster */ +#define TEGRA186_CLK_NAFLL_BCPU 579 +/** @brief input from Tegra's CLK_32K_IN pad */ +#define TEGRA186_CLK_CLK_32K 608 +/** @brief output of divider CLK_RST_CONTROLLER_CLK_M_DIVIDE */ +#define TEGRA186_CLK_CLK_M 609 +/** @brief output of divider PLL_REF_DIV in CLK_RST_CONTROLLER_OSC_CTRL */ +#define TEGRA186_CLK_PLL_REF 610 +/** @brief input from Tegra's XTAL_IN */ +#define TEGRA186_CLK_OSC 612 +/** @brief clock recovered from EAVB input */ +#define TEGRA186_CLK_EQOS_RX_INPUT 613 +/** @brief clock recovered from DTV input */ +#define TEGRA186_CLK_DTV_INPUT 614 +/** @brief SOR0 brick output which feeds into SOR0_CLK_SEL mux in CLK_RST_CONTROLLER_CLK_SOURCE_SOR0*/ +#define TEGRA186_CLK_SOR0_PAD_CLKOUT 615 +/** @brief SOR1 brick output which feeds into SOR1_CLK_SEL mux in CLK_RST_CONTROLLER_CLK_SOURCE_SOR1*/ +#define TEGRA186_CLK_SOR1_PAD_CLKOUT 616 +/** @brief clock recovered from I2S1 input */ +#define TEGRA186_CLK_I2S1_SYNC_INPUT 617 +/** @brief clock recovered from I2S2 input */ +#define TEGRA186_CLK_I2S2_SYNC_INPUT 618 +/** @brief clock recovered from I2S3 input */ +#define TEGRA186_CLK_I2S3_SYNC_INPUT 619 +/** @brief clock recovered from I2S4 input */ +#define TEGRA186_CLK_I2S4_SYNC_INPUT 620 +/** @brief clock recovered from I2S5 input */ +#define TEGRA186_CLK_I2S5_SYNC_INPUT 621 +/** @brief clock recovered from I2S6 input */ +#define TEGRA186_CLK_I2S6_SYNC_INPUT 622 +/** @brief clock recovered from SPDIFIN input */ +#define TEGRA186_CLK_SPDIFIN_SYNC_INPUT 623 + +/** + * @brief subject to change + * @details maximum clock identifier value plus one. + */ +#define TEGRA186_CLK_CLK_MAX 624 + +/** @} */ + +#endif diff --git a/dts/include/dt-bindings/gpio/meson-gxl-gpio.h b/dts/include/dt-bindings/gpio/meson-gxl-gpio.h new file mode 100644 index 0000000000..684d0d7add --- /dev/null +++ b/dts/include/dt-bindings/gpio/meson-gxl-gpio.h @@ -0,0 +1,131 @@ +/* + * GPIO definitions for Amlogic Meson GXL SoCs + * + * Copyright (C) 2016 Endless Mobile, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _DT_BINDINGS_MESON_GXL_GPIO_H +#define _DT_BINDINGS_MESON_GXL_GPIO_H + +#define GPIOAO_0 0 +#define GPIOAO_1 1 +#define GPIOAO_2 2 +#define GPIOAO_3 3 +#define GPIOAO_4 4 +#define GPIOAO_5 5 +#define GPIOAO_6 6 +#define GPIOAO_7 7 +#define GPIOAO_8 8 +#define GPIOAO_9 9 + +#define GPIOZ_0 0 +#define GPIOZ_1 1 +#define GPIOZ_2 2 +#define GPIOZ_3 3 +#define GPIOZ_4 4 +#define GPIOZ_5 5 +#define GPIOZ_6 6 +#define GPIOZ_7 7 +#define GPIOZ_8 8 +#define GPIOZ_9 9 +#define GPIOZ_10 10 +#define GPIOZ_11 11 +#define GPIOZ_12 12 +#define GPIOZ_13 13 +#define GPIOZ_14 14 +#define GPIOZ_15 15 +#define GPIOH_0 16 +#define GPIOH_1 17 +#define GPIOH_2 18 +#define GPIOH_3 19 +#define GPIOH_4 20 +#define GPIOH_5 21 +#define GPIOH_6 22 +#define GPIOH_7 23 +#define GPIOH_8 24 +#define GPIOH_9 25 +#define BOOT_0 26 +#define BOOT_1 27 +#define BOOT_2 28 +#define BOOT_3 29 +#define BOOT_4 30 +#define BOOT_5 31 +#define BOOT_6 32 +#define BOOT_7 33 +#define BOOT_8 34 +#define BOOT_9 35 +#define BOOT_10 36 +#define BOOT_11 37 +#define BOOT_12 38 +#define BOOT_13 39 +#define BOOT_14 40 +#define BOOT_15 41 +#define CARD_0 42 +#define CARD_1 43 +#define CARD_2 44 +#define CARD_3 45 +#define CARD_4 46 +#define CARD_5 47 +#define CARD_6 48 +#define GPIODV_0 49 +#define GPIODV_1 50 +#define GPIODV_2 51 +#define GPIODV_3 52 +#define GPIODV_4 53 +#define GPIODV_5 54 +#define GPIODV_6 55 +#define GPIODV_7 56 +#define GPIODV_8 57 +#define GPIODV_9 58 +#define GPIODV_10 59 +#define GPIODV_11 60 +#define GPIODV_12 61 +#define GPIODV_13 62 +#define GPIODV_14 63 +#define GPIODV_15 64 +#define GPIODV_16 65 +#define GPIODV_17 66 +#define GPIODV_18 67 +#define GPIODV_19 68 +#define GPIODV_20 69 +#define GPIODV_21 70 +#define GPIODV_22 71 +#define GPIODV_23 72 +#define GPIODV_24 73 +#define GPIODV_25 74 +#define GPIODV_26 75 +#define GPIODV_27 76 +#define GPIODV_28 77 +#define GPIODV_29 78 +#define GPIOX_0 79 +#define GPIOX_1 80 +#define GPIOX_2 81 +#define GPIOX_3 82 +#define GPIOX_4 83 +#define GPIOX_5 84 +#define GPIOX_6 85 +#define GPIOX_7 86 +#define GPIOX_8 87 +#define GPIOX_9 88 +#define GPIOX_10 89 +#define GPIOX_11 90 +#define GPIOX_12 91 +#define GPIOX_13 92 +#define GPIOX_14 93 +#define GPIOX_15 94 +#define GPIOX_16 95 +#define GPIOX_17 96 +#define GPIOX_18 97 +#define GPIOCLK_0 98 +#define GPIOCLK_1 99 +#define GPIO_TEST_N 100 + +#endif diff --git a/dts/include/dt-bindings/mailbox/tegra186-hsp.h b/dts/include/dt-bindings/mailbox/tegra186-hsp.h new file mode 100644 index 0000000000..f5d66e5f5f --- /dev/null +++ b/dts/include/dt-bindings/mailbox/tegra186-hsp.h @@ -0,0 +1,24 @@ +/* + * This header provides constants for binding nvidia,tegra186-hsp. + */ + +#ifndef _DT_BINDINGS_MAILBOX_TEGRA186_HSP_H +#define _DT_BINDINGS_MAILBOX_TEGRA186_HSP_H + +/* + * These define the type of mailbox that is to be used (doorbell, shared + * mailbox, shared semaphore or arbitrated semaphore). + */ +#define TEGRA_HSP_MBOX_TYPE_DB 0x0 +#define TEGRA_HSP_MBOX_TYPE_SM 0x1 +#define TEGRA_HSP_MBOX_TYPE_SS 0x2 +#define TEGRA_HSP_MBOX_TYPE_AS 0x3 + +/* + * These defines represent the bit associated with the given master ID in the + * doorbell registers. + */ +#define TEGRA_HSP_DB_MASTER_CCPLEX 17 +#define TEGRA_HSP_DB_MASTER_BPMP 19 + +#endif diff --git a/dts/include/dt-bindings/mfd/tps65217.h b/dts/include/dt-bindings/mfd/tps65217.h new file mode 100644 index 0000000000..cafb9e60cf --- /dev/null +++ b/dts/include/dt-bindings/mfd/tps65217.h @@ -0,0 +1,26 @@ +/* + * This header provides macros for TI TPS65217 DT bindings. + * + * Copyright (C) 2016 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __DT_BINDINGS_TPS65217_H__ +#define __DT_BINDINGS_TPS65217_H__ + +#define TPS65217_IRQ_USB 0 +#define TPS65217_IRQ_AC 1 +#define TPS65217_IRQ_PB 2 + +#endif diff --git a/dts/include/dt-bindings/net/mscc-phy-vsc8531.h b/dts/include/dt-bindings/net/mscc-phy-vsc8531.h deleted file mode 100644 index 2383dd20ff..0000000000 --- a/dts/include/dt-bindings/net/mscc-phy-vsc8531.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Device Tree constants for Microsemi VSC8531 PHY - * - * Author: Nagaraju Lakkaraju - * - * License: Dual MIT/GPL - * Copyright (c) 2016 Microsemi Corporation - */ - -#ifndef _DT_BINDINGS_MSCC_VSC8531_H -#define _DT_BINDINGS_MSCC_VSC8531_H - -/* MAC interface Edge rate control VDDMAC in milli Volts */ -#define MSCC_VDDMAC_3300 3300 -#define MSCC_VDDMAC_2500 2500 -#define MSCC_VDDMAC_1800 1800 -#define MSCC_VDDMAC_1500 1500 -#define MSCC_VDDMAC_MAX 4 -#define MSCC_SLOWDOWN_MAX 8 - -#endif diff --git a/dts/include/dt-bindings/pinctrl/at91.h b/dts/include/dt-bindings/pinctrl/at91.h index bbca3d0389..2732d6c0fb 100644 --- a/dts/include/dt-bindings/pinctrl/at91.h +++ b/dts/include/dt-bindings/pinctrl/at91.h @@ -15,6 +15,8 @@ #define AT91_PINCTRL_DEGLITCH (1 << 2) #define AT91_PINCTRL_PULL_DOWN (1 << 3) #define AT91_PINCTRL_DIS_SCHMIT (1 << 4) +#define AT91_PINCTRL_OUTPUT (1 << 7) +#define AT91_PINCTRL_OUTPUT_VAL(x) ((x & 0x1) << 8) #define AT91_PINCTRL_DEBOUNCE (1 << 16) #define AT91_PINCTRL_DEBOUNCE_VAL(x) (x << 17) diff --git a/dts/include/dt-bindings/pinctrl/bcm2835.h b/dts/include/dt-bindings/pinctrl/bcm2835.h index 6f0bc37af3..e4e4fdf5d3 100644 --- a/dts/include/dt-bindings/pinctrl/bcm2835.h +++ b/dts/include/dt-bindings/pinctrl/bcm2835.h @@ -24,4 +24,9 @@ #define BCM2835_FSEL_ALT2 6 #define BCM2835_FSEL_ALT3 7 +/* brcm,pull property */ +#define BCM2835_PUD_OFF 0 +#define BCM2835_PUD_DOWN 1 +#define BCM2835_PUD_UP 2 + #endif /* __DT_BINDINGS_PINCTRL_BCM2835_H__ */ diff --git a/dts/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/dts/include/dt-bindings/pinctrl/qcom,pmic-gpio.h index aafa76cb56..d33f17c8a5 100644 --- a/dts/include/dt-bindings/pinctrl/qcom,pmic-gpio.h +++ b/dts/include/dt-bindings/pinctrl/qcom,pmic-gpio.h @@ -89,6 +89,10 @@ #define PMA8084_GPIO_S4 2 #define PMA8084_GPIO_L6 3 +#define PM8994_GPIO_VPH 0 +#define PM8994_GPIO_S4 2 +#define PM8994_GPIO_L12 3 + /* To be used with "function" */ #define PMIC_GPIO_FUNC_NORMAL "normal" #define PMIC_GPIO_FUNC_PAIRED "paired" diff --git a/dts/include/dt-bindings/pinctrl/qcom,pmic-mpp.h b/dts/include/dt-bindings/pinctrl/qcom,pmic-mpp.h index a15c1704d0..2e360d8f78 100644 --- a/dts/include/dt-bindings/pinctrl/qcom,pmic-mpp.h +++ b/dts/include/dt-bindings/pinctrl/qcom,pmic-mpp.h @@ -65,6 +65,12 @@ #define PMA8084_MPP_S4 2 #define PMA8084_MPP_L6 3 +#define PM8994_MPP_VPH 0 +/* Only supported for MPP_05-MPP_08 */ +#define PM8994_MPP_L19 1 +#define PM8994_MPP_S4 2 +#define PM8994_MPP_L12 3 + /* * Analog Input - Set the source for analog input. * To be used with "qcom,amux-route" property diff --git a/dts/include/dt-bindings/pinctrl/rockchip.h b/dts/include/dt-bindings/pinctrl/rockchip.h index 743e66a95e..aaec8baaa3 100644 --- a/dts/include/dt-bindings/pinctrl/rockchip.h +++ b/dts/include/dt-bindings/pinctrl/rockchip.h @@ -25,6 +25,39 @@ #define RK_GPIO4 4 #define RK_GPIO6 6 +#define RK_PA0 0 +#define RK_PA1 1 +#define RK_PA2 2 +#define RK_PA3 3 +#define RK_PA4 4 +#define RK_PA5 5 +#define RK_PA6 6 +#define RK_PA7 7 +#define RK_PB0 8 +#define RK_PB1 9 +#define RK_PB2 10 +#define RK_PB3 11 +#define RK_PB4 12 +#define RK_PB5 13 +#define RK_PB6 14 +#define RK_PB7 15 +#define RK_PC0 16 +#define RK_PC1 17 +#define RK_PC2 18 +#define RK_PC3 19 +#define RK_PC4 20 +#define RK_PC5 21 +#define RK_PC6 22 +#define RK_PC7 23 +#define RK_PD0 24 +#define RK_PD1 25 +#define RK_PD2 26 +#define RK_PD3 27 +#define RK_PD4 28 +#define RK_PD5 29 +#define RK_PD6 30 +#define RK_PD7 31 + #define RK_FUNC_GPIO 0 #define RK_FUNC_1 1 #define RK_FUNC_2 2 diff --git a/dts/include/dt-bindings/power/mt2701-power.h b/dts/include/dt-bindings/power/mt2701-power.h new file mode 100644 index 0000000000..64cc826d64 --- /dev/null +++ b/dts/include/dt-bindings/power/mt2701-power.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2015 MediaTek Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DT_BINDINGS_POWER_MT2701_POWER_H +#define _DT_BINDINGS_POWER_MT2701_POWER_H + +#define MT2701_POWER_DOMAIN_CONN 0 +#define MT2701_POWER_DOMAIN_DISP 1 +#define MT2701_POWER_DOMAIN_MFG 2 +#define MT2701_POWER_DOMAIN_VDEC 3 +#define MT2701_POWER_DOMAIN_ISP 4 +#define MT2701_POWER_DOMAIN_BDP 5 +#define MT2701_POWER_DOMAIN_ETH 6 +#define MT2701_POWER_DOMAIN_HIF 7 +#define MT2701_POWER_DOMAIN_IFR_MSC 8 + +#endif /* _DT_BINDINGS_POWER_MT2701_POWER_H */ diff --git a/dts/include/dt-bindings/power/r8a7743-sysc.h b/dts/include/dt-bindings/power/r8a7743-sysc.h new file mode 100644 index 0000000000..61cfbb2907 --- /dev/null +++ b/dts/include/dt-bindings/power/r8a7743-sysc.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2016 Cogent Embedded Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __DT_BINDINGS_POWER_R8A7743_SYSC_H__ +#define __DT_BINDINGS_POWER_R8A7743_SYSC_H__ + +/* + * These power domain indices match the numbers of the interrupt bits + * representing the power areas in the various Interrupt Registers + * (e.g. SYSCISR, Interrupt Status Register) + */ + +#define R8A7743_PD_CA15_CPU0 0 +#define R8A7743_PD_CA15_CPU1 1 +#define R8A7743_PD_CA15_SCU 12 +#define R8A7743_PD_SGX 20 + +/* Always-on power area */ +#define R8A7743_PD_ALWAYS_ON 32 + +#endif /* __DT_BINDINGS_POWER_R8A7743_SYSC_H__ */ diff --git a/dts/include/dt-bindings/power/r8a7745-sysc.h b/dts/include/dt-bindings/power/r8a7745-sysc.h new file mode 100644 index 0000000000..1844c1171c --- /dev/null +++ b/dts/include/dt-bindings/power/r8a7745-sysc.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2016 Cogent Embedded Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __DT_BINDINGS_POWER_R8A7745_SYSC_H__ +#define __DT_BINDINGS_POWER_R8A7745_SYSC_H__ + +/* + * These power domain indices match the numbers of the interrupt bits + * representing the power areas in the various Interrupt Registers + * (e.g. SYSCISR, Interrupt Status Register) + */ + +#define R8A7745_PD_CA7_CPU0 5 +#define R8A7745_PD_CA7_CPU1 6 +#define R8A7745_PD_SGX 20 +#define R8A7745_PD_CA7_SCU 21 + +/* Always-on power area */ +#define R8A7745_PD_ALWAYS_ON 32 + +#endif /* __DT_BINDINGS_POWER_R8A7745_SYSC_H__ */ diff --git a/dts/include/dt-bindings/power/tegra186-powergate.h b/dts/include/dt-bindings/power/tegra186-powergate.h new file mode 100644 index 0000000000..388d6e228d --- /dev/null +++ b/dts/include/dt-bindings/power/tegra186-powergate.h @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2015-2016, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _DT_BINDINGS_POWER_TEGRA186_POWERGATE_H +#define _DT_BINDINGS_POWER_TEGRA186_POWERGATE_H + +#define TEGRA186_POWER_DOMAIN_AUD 0 +#define TEGRA186_POWER_DOMAIN_DFD 1 +#define TEGRA186_POWER_DOMAIN_DISP 2 +#define TEGRA186_POWER_DOMAIN_DISPB 3 +#define TEGRA186_POWER_DOMAIN_DISPC 4 +#define TEGRA186_POWER_DOMAIN_ISPA 5 +#define TEGRA186_POWER_DOMAIN_NVDEC 6 +#define TEGRA186_POWER_DOMAIN_NVJPG 7 +#define TEGRA186_POWER_DOMAIN_MPE 8 +#define TEGRA186_POWER_DOMAIN_PCX 9 +#define TEGRA186_POWER_DOMAIN_SAX 10 +#define TEGRA186_POWER_DOMAIN_VE 11 +#define TEGRA186_POWER_DOMAIN_VIC 12 +#define TEGRA186_POWER_DOMAIN_XUSBA 13 +#define TEGRA186_POWER_DOMAIN_XUSBB 14 +#define TEGRA186_POWER_DOMAIN_XUSBC 15 +#define TEGRA186_POWER_DOMAIN_GPU 43 +#define TEGRA186_POWER_DOMAIN_MAX 44 + +#endif diff --git a/dts/include/dt-bindings/reset/oxsemi,ox810se.h b/dts/include/dt-bindings/reset/oxsemi,ox810se.h new file mode 100644 index 0000000000..960c26e450 --- /dev/null +++ b/dts/include/dt-bindings/reset/oxsemi,ox810se.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef DT_RESET_OXSEMI_OX810SE_H +#define DT_RESET_OXSEMI_OX810SE_H + +#define RESET_ARM 0 +#define RESET_COPRO 1 +/* Reserved 2 */ +/* Reserved 3 */ +#define RESET_USBHS 4 +#define RESET_USBHSPHY 5 +#define RESET_MAC 6 +#define RESET_PCI 7 +#define RESET_DMA 8 +#define RESET_DPE 9 +#define RESET_DDR 10 +#define RESET_SATA 11 +#define RESET_SATA_LINK 12 +#define RESET_SATA_PHY 13 + /* Reserved 14 */ +#define RESET_NAND 15 +#define RESET_GPIO 16 +#define RESET_UART1 17 +#define RESET_UART2 18 +#define RESET_MISC 19 +#define RESET_I2S 20 +#define RESET_AHB_MON 21 +#define RESET_UART3 22 +#define RESET_UART4 23 +#define RESET_SGDMA 24 +/* Reserved 25 */ +/* Reserved 26 */ +/* Reserved 27 */ +/* Reserved 28 */ +/* Reserved 29 */ +/* Reserved 30 */ +#define RESET_BUS 31 + +#endif /* DT_RESET_OXSEMI_OX810SE_H */ diff --git a/dts/include/dt-bindings/reset/oxsemi,ox820.h b/dts/include/dt-bindings/reset/oxsemi,ox820.h new file mode 100644 index 0000000000..cc6797bf01 --- /dev/null +++ b/dts/include/dt-bindings/reset/oxsemi,ox820.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef DT_RESET_OXSEMI_OX820_H +#define DT_RESET_OXSEMI_OX820_H + +#define RESET_SCU 0 +#define RESET_LEON 1 +#define RESET_ARM0 2 +#define RESET_ARM1 3 +#define RESET_USBHS 4 +#define RESET_USBPHYA 5 +#define RESET_MAC 6 +#define RESET_PCIEA 7 +#define RESET_SGDMA 8 +#define RESET_CIPHER 9 +#define RESET_DDR 10 +#define RESET_SATA 11 +#define RESET_SATA_LINK 12 +#define RESET_SATA_PHY 13 +#define RESET_PCIEPHY 14 +#define RESET_NAND 15 +#define RESET_GPIO 16 +#define RESET_UART1 17 +#define RESET_UART2 18 +#define RESET_MISC 19 +#define RESET_I2S 20 +#define RESET_SD 21 +#define RESET_MAC_2 22 +#define RESET_PCIEB 23 +#define RESET_VIDEO 24 +#define RESET_DDR_PHY 25 +#define RESET_USBPHYB 26 +#define RESET_USBDEV 27 +/* Reserved 29 */ +#define RESET_ARMDBG 29 +#define RESET_PLLA 30 +#define RESET_PLLB 31 + +#endif /* DT_RESET_OXSEMI_OX820_H */ diff --git a/dts/include/dt-bindings/reset/sun50i-a64-ccu.h b/dts/include/dt-bindings/reset/sun50i-a64-ccu.h new file mode 100644 index 0000000000..db60b29ddb --- /dev/null +++ b/dts/include/dt-bindings/reset/sun50i-a64-ccu.h @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_RST_SUN50I_A64_H_ +#define _DT_BINDINGS_RST_SUN50I_A64_H_ + +#define RST_USB_PHY0 0 +#define RST_USB_PHY1 1 +#define RST_USB_HSIC 2 +#define RST_DRAM 3 +#define RST_MBUS 4 +#define RST_BUS_MIPI_DSI 5 +#define RST_BUS_CE 6 +#define RST_BUS_DMA 7 +#define RST_BUS_MMC0 8 +#define RST_BUS_MMC1 9 +#define RST_BUS_MMC2 10 +#define RST_BUS_NAND 11 +#define RST_BUS_DRAM 12 +#define RST_BUS_EMAC 13 +#define RST_BUS_TS 14 +#define RST_BUS_HSTIMER 15 +#define RST_BUS_SPI0 16 +#define RST_BUS_SPI1 17 +#define RST_BUS_OTG 18 +#define RST_BUS_EHCI0 19 +#define RST_BUS_EHCI1 20 +#define RST_BUS_OHCI0 21 +#define RST_BUS_OHCI1 22 +#define RST_BUS_VE 23 +#define RST_BUS_TCON0 24 +#define RST_BUS_TCON1 25 +#define RST_BUS_DEINTERLACE 26 +#define RST_BUS_CSI 27 +#define RST_BUS_HDMI0 28 +#define RST_BUS_HDMI1 29 +#define RST_BUS_DE 30 +#define RST_BUS_GPU 31 +#define RST_BUS_MSGBOX 32 +#define RST_BUS_SPINLOCK 33 +#define RST_BUS_DBG 34 +#define RST_BUS_LVDS 35 +#define RST_BUS_CODEC 36 +#define RST_BUS_SPDIF 37 +#define RST_BUS_THS 38 +#define RST_BUS_I2S0 39 +#define RST_BUS_I2S1 40 +#define RST_BUS_I2S2 41 +#define RST_BUS_I2C0 42 +#define RST_BUS_I2C1 43 +#define RST_BUS_I2C2 44 +#define RST_BUS_SCR 45 +#define RST_BUS_UART0 46 +#define RST_BUS_UART1 47 +#define RST_BUS_UART2 48 +#define RST_BUS_UART3 49 +#define RST_BUS_UART4 50 + +#endif /* _DT_BINDINGS_RST_SUN50I_A64_H_ */ diff --git a/dts/include/dt-bindings/reset/tegra186-reset.h b/dts/include/dt-bindings/reset/tegra186-reset.h new file mode 100644 index 0000000000..8a184e3579 --- /dev/null +++ b/dts/include/dt-bindings/reset/tegra186-reset.h @@ -0,0 +1,217 @@ +/* + * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _ABI_MACH_T186_RESET_T186_H_ +#define _ABI_MACH_T186_RESET_T186_H_ + + +#define TEGRA186_RESET_ACTMON 0 +#define TEGRA186_RESET_AFI 1 +#define TEGRA186_RESET_CEC 2 +#define TEGRA186_RESET_CSITE 3 +#define TEGRA186_RESET_DP2 4 +#define TEGRA186_RESET_DPAUX 5 +#define TEGRA186_RESET_DSI 6 +#define TEGRA186_RESET_DSIB 7 +#define TEGRA186_RESET_DTV 8 +#define TEGRA186_RESET_DVFS 9 +#define TEGRA186_RESET_ENTROPY 10 +#define TEGRA186_RESET_EXTPERIPH1 11 +#define TEGRA186_RESET_EXTPERIPH2 12 +#define TEGRA186_RESET_EXTPERIPH3 13 +#define TEGRA186_RESET_GPU 14 +#define TEGRA186_RESET_HDA 15 +#define TEGRA186_RESET_HDA2CODEC_2X 16 +#define TEGRA186_RESET_HDA2HDMICODEC 17 +#define TEGRA186_RESET_HOST1X 18 +#define TEGRA186_RESET_I2C1 19 +#define TEGRA186_RESET_I2C2 20 +#define TEGRA186_RESET_I2C3 21 +#define TEGRA186_RESET_I2C4 22 +#define TEGRA186_RESET_I2C5 23 +#define TEGRA186_RESET_I2C6 24 +#define TEGRA186_RESET_ISP 25 +#define TEGRA186_RESET_KFUSE 26 +#define TEGRA186_RESET_LA 27 +#define TEGRA186_RESET_MIPI_CAL 28 +#define TEGRA186_RESET_PCIE 29 +#define TEGRA186_RESET_PCIEXCLK 30 +#define TEGRA186_RESET_SATA 31 +#define TEGRA186_RESET_SATACOLD 32 +#define TEGRA186_RESET_SDMMC1 33 +#define TEGRA186_RESET_SDMMC2 34 +#define TEGRA186_RESET_SDMMC3 35 +#define TEGRA186_RESET_SDMMC4 36 +#define TEGRA186_RESET_SE 37 +#define TEGRA186_RESET_SOC_THERM 38 +#define TEGRA186_RESET_SOR0 39 +#define TEGRA186_RESET_SPI1 40 +#define TEGRA186_RESET_SPI2 41 +#define TEGRA186_RESET_SPI3 42 +#define TEGRA186_RESET_SPI4 43 +#define TEGRA186_RESET_TMR 44 +#define TEGRA186_RESET_TRIG_SYS 45 +#define TEGRA186_RESET_TSEC 46 +#define TEGRA186_RESET_UARTA 47 +#define TEGRA186_RESET_UARTB 48 +#define TEGRA186_RESET_UARTC 49 +#define TEGRA186_RESET_UARTD 50 +#define TEGRA186_RESET_VI 51 +#define TEGRA186_RESET_VIC 52 +#define TEGRA186_RESET_XUSB_DEV 53 +#define TEGRA186_RESET_XUSB_HOST 54 +#define TEGRA186_RESET_XUSB_PADCTL 55 +#define TEGRA186_RESET_XUSB_SS 56 +#define TEGRA186_RESET_AON_APB 57 +#define TEGRA186_RESET_AXI_CBB 58 +#define TEGRA186_RESET_BPMP_APB 59 +#define TEGRA186_RESET_CAN1 60 +#define TEGRA186_RESET_CAN2 61 +#define TEGRA186_RESET_DMIC5 62 +#define TEGRA186_RESET_DSIC 63 +#define TEGRA186_RESET_DSID 64 +#define TEGRA186_RESET_EMC_EMC 65 +#define TEGRA186_RESET_EMC_MEM 66 +#define TEGRA186_RESET_EMCSB_EMC 67 +#define TEGRA186_RESET_EMCSB_MEM 68 +#define TEGRA186_RESET_EQOS 69 +#define TEGRA186_RESET_GPCDMA 70 +#define TEGRA186_RESET_GPIO_CTL0 71 +#define TEGRA186_RESET_GPIO_CTL1 72 +#define TEGRA186_RESET_GPIO_CTL2 73 +#define TEGRA186_RESET_GPIO_CTL3 74 +#define TEGRA186_RESET_GPIO_CTL4 75 +#define TEGRA186_RESET_GPIO_CTL5 76 +#define TEGRA186_RESET_I2C10 77 +#define TEGRA186_RESET_I2C12 78 +#define TEGRA186_RESET_I2C13 79 +#define TEGRA186_RESET_I2C14 80 +#define TEGRA186_RESET_I2C7 81 +#define TEGRA186_RESET_I2C8 82 +#define TEGRA186_RESET_I2C9 83 +#define TEGRA186_RESET_JTAG2AXI 84 +#define TEGRA186_RESET_MPHY_IOBIST 85 +#define TEGRA186_RESET_MPHY_L0_RX 86 +#define TEGRA186_RESET_MPHY_L0_TX 87 +#define TEGRA186_RESET_NVCSI 88 +#define TEGRA186_RESET_NVDISPLAY0_HEAD0 89 +#define TEGRA186_RESET_NVDISPLAY0_HEAD1 90 +#define TEGRA186_RESET_NVDISPLAY0_HEAD2 91 +#define TEGRA186_RESET_NVDISPLAY0_MISC 92 +#define TEGRA186_RESET_NVDISPLAY0_WGRP0 93 +#define TEGRA186_RESET_NVDISPLAY0_WGRP1 94 +#define TEGRA186_RESET_NVDISPLAY0_WGRP2 95 +#define TEGRA186_RESET_NVDISPLAY0_WGRP3 96 +#define TEGRA186_RESET_NVDISPLAY0_WGRP4 97 +#define TEGRA186_RESET_NVDISPLAY0_WGRP5 98 +#define TEGRA186_RESET_PWM1 99 +#define TEGRA186_RESET_PWM2 100 +#define TEGRA186_RESET_PWM3 101 +#define TEGRA186_RESET_PWM4 102 +#define TEGRA186_RESET_PWM5 103 +#define TEGRA186_RESET_PWM6 104 +#define TEGRA186_RESET_PWM7 105 +#define TEGRA186_RESET_PWM8 106 +#define TEGRA186_RESET_SCE_APB 107 +#define TEGRA186_RESET_SOR1 108 +#define TEGRA186_RESET_TACH 109 +#define TEGRA186_RESET_TSC 110 +#define TEGRA186_RESET_UARTF 111 +#define TEGRA186_RESET_UARTG 112 +#define TEGRA186_RESET_UFSHC 113 +#define TEGRA186_RESET_UFSHC_AXI_M 114 +#define TEGRA186_RESET_UPHY 115 +#define TEGRA186_RESET_ADSP 116 +#define TEGRA186_RESET_ADSPDBG 117 +#define TEGRA186_RESET_ADSPINTF 118 +#define TEGRA186_RESET_ADSPNEON 119 +#define TEGRA186_RESET_ADSPPERIPH 120 +#define TEGRA186_RESET_ADSPSCU 121 +#define TEGRA186_RESET_ADSPWDT 122 +#define TEGRA186_RESET_APE 123 +#define TEGRA186_RESET_DPAUX1 124 +#define TEGRA186_RESET_NVDEC 125 +#define TEGRA186_RESET_NVENC 126 +#define TEGRA186_RESET_NVJPG 127 +#define TEGRA186_RESET_PEX_USB_UPHY 128 +#define TEGRA186_RESET_QSPI 129 +#define TEGRA186_RESET_TSECB 130 +#define TEGRA186_RESET_VI_I2C 131 +#define TEGRA186_RESET_UARTE 132 +#define TEGRA186_RESET_TOP_GTE 133 +#define TEGRA186_RESET_SHSP 134 +#define TEGRA186_RESET_PEX_USB_UPHY_L5 135 +#define TEGRA186_RESET_PEX_USB_UPHY_L4 136 +#define TEGRA186_RESET_PEX_USB_UPHY_L3 137 +#define TEGRA186_RESET_PEX_USB_UPHY_L2 138 +#define TEGRA186_RESET_PEX_USB_UPHY_L1 139 +#define TEGRA186_RESET_PEX_USB_UPHY_L0 140 +#define TEGRA186_RESET_PEX_USB_UPHY_PLL1 141 +#define TEGRA186_RESET_PEX_USB_UPHY_PLL0 142 +#define TEGRA186_RESET_TSCTNVI 143 +#define TEGRA186_RESET_EXTPERIPH4 144 +#define TEGRA186_RESET_DSIPADCTL 145 +#define TEGRA186_RESET_AUD_MCLK 146 +#define TEGRA186_RESET_MPHY_CLK_CTL 147 +#define TEGRA186_RESET_MPHY_L1_RX 148 +#define TEGRA186_RESET_MPHY_L1_TX 149 +#define TEGRA186_RESET_UFSHC_LP 150 +#define TEGRA186_RESET_BPMP_NIC 151 +#define TEGRA186_RESET_BPMP_NSYSPORESET 152 +#define TEGRA186_RESET_BPMP_NRESET 153 +#define TEGRA186_RESET_BPMP_DBGRESETN 154 +#define TEGRA186_RESET_BPMP_PRESETDBGN 155 +#define TEGRA186_RESET_BPMP_PM 156 +#define TEGRA186_RESET_BPMP_CVC 157 +#define TEGRA186_RESET_BPMP_DMA 158 +#define TEGRA186_RESET_BPMP_HSP 159 +#define TEGRA186_RESET_TSCTNBPMP 160 +#define TEGRA186_RESET_BPMP_TKE 161 +#define TEGRA186_RESET_BPMP_GTE 162 +#define TEGRA186_RESET_BPMP_PM_ACTMON 163 +#define TEGRA186_RESET_AON_NIC 164 +#define TEGRA186_RESET_AON_NSYSPORESET 165 +#define TEGRA186_RESET_AON_NRESET 166 +#define TEGRA186_RESET_AON_DBGRESETN 167 +#define TEGRA186_RESET_AON_PRESETDBGN 168 +#define TEGRA186_RESET_AON_ACTMON 169 +#define TEGRA186_RESET_AOPM 170 +#define TEGRA186_RESET_AOVC 171 +#define TEGRA186_RESET_AON_DMA 172 +#define TEGRA186_RESET_AON_GPIO 173 +#define TEGRA186_RESET_AON_HSP 174 +#define TEGRA186_RESET_TSCTNAON 175 +#define TEGRA186_RESET_AON_TKE 176 +#define TEGRA186_RESET_AON_GTE 177 +#define TEGRA186_RESET_SCE_NIC 178 +#define TEGRA186_RESET_SCE_NSYSPORESET 179 +#define TEGRA186_RESET_SCE_NRESET 180 +#define TEGRA186_RESET_SCE_DBGRESETN 181 +#define TEGRA186_RESET_SCE_PRESETDBGN 182 +#define TEGRA186_RESET_SCE_ACTMON 183 +#define TEGRA186_RESET_SCE_PM 184 +#define TEGRA186_RESET_SCE_DMA 185 +#define TEGRA186_RESET_SCE_HSP 186 +#define TEGRA186_RESET_TSCTNSCE 187 +#define TEGRA186_RESET_SCE_TKE 188 +#define TEGRA186_RESET_SCE_GTE 189 +#define TEGRA186_RESET_SCE_CFG 190 +#define TEGRA186_RESET_ADSP_ALL 191 +/** @brief controls the power up/down sequence of UFSHC PSW partition. Controls LP_PWR_READY, LP_ISOL_EN, and LP_RESET_N signals */ +#define TEGRA186_RESET_UFSHC_LP_SEQ 192 +#define TEGRA186_RESET_SIZE 193 + +#endif diff --git a/dts/include/dt-bindings/sound/cs42l42.h b/dts/include/dt-bindings/sound/cs42l42.h new file mode 100644 index 0000000000..399a123aed --- /dev/null +++ b/dts/include/dt-bindings/sound/cs42l42.h @@ -0,0 +1,73 @@ +/* + * cs42l42.h -- CS42L42 ALSA SoC audio driver DT bindings header + * + * Copyright 2016 Cirrus Logic, Inc. + * + * Author: James Schulman <james.schulman@cirrus.com> + * Author: Brian Austin <brian.austin@cirrus.com> + * Author: Michael White <michael.white@cirrus.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DT_CS42L42_H +#define __DT_CS42L42_H + +/* HPOUT Load Capacity */ +#define CS42L42_HPOUT_LOAD_1NF 0 +#define CS42L42_HPOUT_LOAD_10NF 1 + +/* HPOUT Clamp to GND Overide */ +#define CS42L42_HPOUT_CLAMP_EN 0 +#define CS42L42_HPOUT_CLAMP_DIS 1 + +/* Tip Sense Inversion */ +#define CS42L42_TS_INV_DIS 0 +#define CS42L42_TS_INV_EN 1 + +/* Tip Sense Debounce */ +#define CS42L42_TS_DBNCE_0 0 +#define CS42L42_TS_DBNCE_125 1 +#define CS42L42_TS_DBNCE_250 2 +#define CS42L42_TS_DBNCE_500 3 +#define CS42L42_TS_DBNCE_750 4 +#define CS42L42_TS_DBNCE_1000 5 +#define CS42L42_TS_DBNCE_1250 6 +#define CS42L42_TS_DBNCE_1500 7 + +/* Button Press Software Debounce Times */ +#define CS42L42_BTN_DET_INIT_DBNCE_MIN 0 +#define CS42L42_BTN_DET_INIT_DBNCE_DEFAULT 100 +#define CS42L42_BTN_DET_INIT_DBNCE_MAX 200 + +#define CS42L42_BTN_DET_EVENT_DBNCE_MIN 0 +#define CS42L42_BTN_DET_EVENT_DBNCE_DEFAULT 10 +#define CS42L42_BTN_DET_EVENT_DBNCE_MAX 20 + +/* Button Detect Level Sensitivities */ +#define CS42L42_NUM_BIASES 4 + +#define CS42L42_HS_DET_LEVEL_15 0x0F +#define CS42L42_HS_DET_LEVEL_8 0x08 +#define CS42L42_HS_DET_LEVEL_4 0x04 +#define CS42L42_HS_DET_LEVEL_1 0x01 + +#define CS42L42_HS_DET_LEVEL_MIN 0 +#define CS42L42_HS_DET_LEVEL_MAX 0x3F + +/* HS Bias Ramp Rate */ + +#define CS42L42_HSBIAS_RAMP_FAST_RISE_SLOW_FALL 0 +#define CS42L42_HSBIAS_RAMP_FAST 1 +#define CS42L42_HSBIAS_RAMP_SLOW 2 +#define CS42L42_HSBIAS_RAMP_SLOWEST 3 + +#define CS42L42_HSBIAS_RAMP_TIME0 10 +#define CS42L42_HSBIAS_RAMP_TIME1 40 +#define CS42L42_HSBIAS_RAMP_TIME2 90 +#define CS42L42_HSBIAS_RAMP_TIME3 170 + +#endif /* __DT_CS42L42_H */ diff --git a/dts/src/arc/abilis_tb10x.dtsi b/dts/src/arc/abilis_tb10x.dtsi index de53f5c325..3121536b25 100644 --- a/dts/src/arc/abilis_tb10x.dtsi +++ b/dts/src/arc/abilis_tb10x.dtsi @@ -129,6 +129,7 @@ data-width = <4>; clocks = <&ahb_clk>; clock-names = "hclk"; + multi-block = <1 1 1 1 1 1>; }; i2c0: i2c@FF120000 { diff --git a/dts/src/arc/axs101.dts b/dts/src/arc/axs101.dts index d9b9b9dcfc..70aec7d6ca 100644 --- a/dts/src/arc/axs101.dts +++ b/dts/src/arc/axs101.dts @@ -17,6 +17,6 @@ compatible = "snps,axs101", "snps,arc-sdp"; chosen { - bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0"; + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=1280x720@60"; }; }; diff --git a/dts/src/arc/axs103_idu.dts b/dts/src/arc/axs103_idu.dts index 070c297822..5c843d9b4a 100644 --- a/dts/src/arc/axs103_idu.dts +++ b/dts/src/arc/axs103_idu.dts @@ -20,6 +20,6 @@ compatible = "snps,axs103", "snps,arc-sdp"; chosen { - bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=ttyS3,115200n8 debug print-fatal-signals=1"; + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 print-fatal-signals=1 consoleblank=0 video=1280x720@60"; }; }; diff --git a/dts/src/arc/zebu_hs.dts b/dts/src/arc/haps_hs.dts index 1c1324e849..1c1324e849 100644 --- a/dts/src/arc/zebu_hs.dts +++ b/dts/src/arc/haps_hs.dts diff --git a/dts/src/arc/zebu_hs_idu.dts b/dts/src/arc/haps_hs_idu.dts index 65204b4c0f..65204b4c0f 100644 --- a/dts/src/arc/zebu_hs_idu.dts +++ b/dts/src/arc/haps_hs_idu.dts diff --git a/dts/src/arm/am335x-baltos-ir2110.dts b/dts/src/arm/am335x-baltos-ir2110.dts index a9a97307d6..501c752712 100644 --- a/dts/src/arm/am335x-baltos-ir2110.dts +++ b/dts/src/arm/am335x-baltos-ir2110.dts @@ -54,16 +54,22 @@ dr_mode = "host"; }; +&davinci_mdio { + phy0: ethernet-phy@0 { + reg = <1>; + }; +}; + &cpsw_emac0 { - phy_id = <&davinci_mdio>, <1>; phy-mode = "rmii"; dual_emac_res_vlan = <1>; + phy-handle = <&phy0>; }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <7>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; }; &phy_sel { diff --git a/dts/src/arm/am335x-baltos-ir3220.dts b/dts/src/arm/am335x-baltos-ir3220.dts index fe002a17c0..19f53b8569 100644 --- a/dts/src/arm/am335x-baltos-ir3220.dts +++ b/dts/src/arm/am335x-baltos-ir3220.dts @@ -109,9 +109,9 @@ }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <7>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; }; &phy_sel { diff --git a/dts/src/arm/am335x-baltos-ir5221.dts b/dts/src/arm/am335x-baltos-ir5221.dts index d0faa7b8c5..2b9d7f4db2 100644 --- a/dts/src/arm/am335x-baltos-ir5221.dts +++ b/dts/src/arm/am335x-baltos-ir5221.dts @@ -114,7 +114,7 @@ &usb1 { status = "okay"; - dr_mode = "otg"; + dr_mode = "host"; }; &cpsw_emac0 { @@ -127,9 +127,9 @@ }; &cpsw_emac1 { - phy_id = <&davinci_mdio>, <7>; phy-mode = "rgmii-txid"; dual_emac_res_vlan = <2>; + phy-handle = <&phy1>; }; &phy_sel { diff --git a/dts/src/arm/am335x-baltos.dtsi b/dts/src/arm/am335x-baltos.dtsi index dd45d172a8..efb5eae290 100644 --- a/dts/src/arm/am335x-baltos.dtsi +++ b/dts/src/arm/am335x-baltos.dtsi @@ -364,11 +364,14 @@ }; &davinci_mdio { + status = "okay"; pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; + phy1: ethernet-phy@1 { + reg = <7>; + }; }; &mmc1 { @@ -406,3 +409,7 @@ &gpio0 { ti,no-reset-on-init; }; + +&gpio3 { + ti,no-reset-on-init; +}; diff --git a/dts/src/arm/am335x-bone-common.dtsi b/dts/src/arm/am335x-bone-common.dtsi index 007b5e5a51..dc561d505b 100644 --- a/dts/src/arm/am335x-bone-common.dtsi +++ b/dts/src/arm/am335x-bone-common.dtsi @@ -6,6 +6,8 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/mfd/tps65217.h> + / { cpus { cpu@0 { @@ -310,8 +312,23 @@ * by the hardware problems. (Tip: double-check by performing a current * measurement after shutdown: it should be less than 1 mA.) */ + + interrupts = <7>; /* NMI */ + interrupt-parent = <&intc>; + ti,pmic-shutdown-controller; + charger { + interrupts = <TPS65217_IRQ_AC>, <TPS65217_IRQ_USB>; + interrupts-names = "AC", "USB"; + status = "okay"; + }; + + pwrbutton { + interrupts = <TPS65217_IRQ_PB>; + status = "okay"; + }; + regulators { dcdc1_reg: regulator@0 { regulator-name = "vdds_dpr"; @@ -393,3 +410,8 @@ &sham { status = "okay"; }; + +&rtc { + clocks = <&clk_32768_ck>, <&clkdiv32k_ick>; + clock-names = "ext-clk", "int-clk"; +}; diff --git a/dts/src/arm/am335x-boneblack.dts b/dts/src/arm/am335x-boneblack.dts index 6bbb1fee08..db00d8ef7b 100644 --- a/dts/src/arm/am335x-boneblack.dts +++ b/dts/src/arm/am335x-boneblack.dts @@ -79,6 +79,14 @@ &lcdc { status = "okay"; + + /* If you want to get 24 bit RGB and 16 BGR mode instead of + * current 16 bit RGB and 24 BGR modes, set the propety + * below to "crossed" and uncomment the video-ports -property + * in tda19988 node. + */ + blue-and-red-wiring = "straight"; + port { lcdc_0: endpoint@0 { remote-endpoint = <&hdmi_0>; @@ -95,6 +103,9 @@ pinctrl-0 = <&nxp_hdmi_bonelt_pins>; pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; + /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */ + /* video-ports = <0x234501>; */ + #sound-dai-cells = <0>; audio-ports = < TDA998x_I2S 0x03>; diff --git a/dts/src/arm/am335x-evm.dts b/dts/src/arm/am335x-evm.dts index e82432c79f..c2186ec283 100644 --- a/dts/src/arm/am335x-evm.dts +++ b/dts/src/arm/am335x-evm.dts @@ -783,3 +783,8 @@ pinctrl-names = "default"; pinctrl-0 = <&dcan1_pins_default>; }; + +&rtc { + clocks = <&clk_32768_ck>, <&clkdiv32k_ick>; + clock-names = "ext-clk", "int-clk"; +}; diff --git a/dts/src/arm/am335x-evmsk.dts b/dts/src/arm/am335x-evmsk.dts index 975c36e332..e2548d1ce7 100644 --- a/dts/src/arm/am335x-evmsk.dts +++ b/dts/src/arm/am335x-evmsk.dts @@ -715,3 +715,8 @@ blue-and-red-wiring = "crossed"; }; + +&rtc { + clocks = <&clk_32768_ck>, <&clkdiv32k_ick>; + clock-names = "ext-clk", "int-clk"; +}; diff --git a/dts/src/arm/am335x-icev2.dts b/dts/src/arm/am335x-icev2.dts index 85e04c2055..1463df3b5b 100644 --- a/dts/src/arm/am335x-icev2.dts +++ b/dts/src/arm/am335x-icev2.dts @@ -43,52 +43,52 @@ enable-active-high; }; - leds0 { + leds-iio { + status = "disabled"; compatible = "gpio-leds"; - - led0 { + led-out0 { label = "out0"; gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led1 { + led-out1 { label = "out1"; gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led2 { + led-out2 { label = "out2"; gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led3 { + led-out3 { label = "out3"; gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led4 { + led-out4 { label = "out4"; gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led5 { + led-out5 { label = "out5"; gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led6 { + led-out6 { label = "out6"; gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - led7 { + led-out7 { label = "out7"; gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>; default-state = "off"; @@ -187,6 +187,8 @@ AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */ AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */ AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */ + AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* (C15) spi0_cs1.spi0_cs1 */ + AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */ >; }; @@ -224,6 +226,31 @@ }; }; +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_default>; + + sn65hvs882@1 { + compatible = "pisosr-gpio"; + gpio-controller; + #gpio-cells = <2>; + + load-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; + + reg = <1>; + spi-max-frequency = <1000000>; + spi-cpol; + }; +}; + +&tscadc { + status = "okay"; + adc { + ti,adc-channels = <1 2 3 4 5 6 7>; + }; +}; + #include "tps65910.dtsi" &tps { diff --git a/dts/src/arm/am33xx.dtsi b/dts/src/arm/am33xx.dtsi index 194d884c9d..64c8aa9057 100644 --- a/dts/src/arm/am33xx.dtsi +++ b/dts/src/arm/am33xx.dtsi @@ -130,6 +130,7 @@ reg = <0x210000 0x2000>; #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; ranges = <0 0x210000 0x2000>; am33xx_pinmux: pinmux@800 { @@ -137,6 +138,7 @@ reg = <0x800 0x238>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x7f>; }; @@ -505,6 +507,8 @@ interrupts = <75 76>; ti,hwmods = "rtc"; + clocks = <&clkdiv32k_ick>; + clock-names = "int-clk"; }; spi0: spi@48030000 { @@ -855,6 +859,8 @@ interrupts = <16>; ti,hwmods = "adc_tsc"; status = "disabled"; + dmas = <&edma 53 0>, <&edma 57 0>; + dma-names = "fifo0", "fifo1"; tsc { compatible = "ti,am3359-tsc"; diff --git a/dts/src/arm/am3517.dtsi b/dts/src/arm/am3517.dtsi index 0db19d39d2..9fe545dbfa 100644 --- a/dts/src/arm/am3517.dtsi +++ b/dts/src/arm/am3517.dtsi @@ -66,6 +66,7 @@ reg = <0x480025d8 0x24>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; diff --git a/dts/src/arm/am4372.dtsi b/dts/src/arm/am4372.dtsi index a275fa9568..ac55f93fc9 100644 --- a/dts/src/arm/am4372.dtsi +++ b/dts/src/arm/am4372.dtsi @@ -189,6 +189,7 @@ reg = <0x800 0x31c>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <32>; @@ -871,6 +872,8 @@ clocks = <&adc_tsc_fck>; clock-names = "fck"; status = "disabled"; + dmas = <&edma 53 0>, <&edma 57 0>; + dma-names = "fifo0", "fifo1"; tsc { compatible = "ti,am3359-tsc"; diff --git a/dts/src/arm/am437x-idk-evm.dts b/dts/src/arm/am437x-idk-evm.dts index 25ce611c65..b76a7c0264 100644 --- a/dts/src/arm/am437x-idk-evm.dts +++ b/dts/src/arm/am437x-idk-evm.dts @@ -117,6 +117,58 @@ compatible = "fixed-clock"; clock-frequency = <32768>; }; + + leds-iio { + status = "disabled"; + compatible = "gpio-leds"; + led-out0 { + label = "out0"; + gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out1 { + label = "out1"; + gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out2 { + label = "out2"; + gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out3 { + label = "out3"; + gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out4 { + label = "out4"; + gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out5 { + label = "out5"; + gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out6 { + label = "out6"; + gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out7 { + label = "out7"; + gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; }; &am43xx_pinmux { @@ -178,6 +230,24 @@ >; }; + spi1_pins_default: spi1_pins_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x908, PIN_INPUT | MUX_MODE2) /* mii1_col.spi1_sclk */ + AM4372_IOPAD(0x910, PIN_INPUT | MUX_MODE2) /* mii1_rx_er.spi1_d1 */ + AM4372_IOPAD(0x944, PIN_OUTPUT | MUX_MODE2) /* rmii1_ref_clk.spi1_cs0 */ + AM4372_IOPAD(0x90c, PIN_OUTPUT | MUX_MODE7) /* mii1_crs.gpio3_1 */ + >; + }; + + spi1_pins_sleep: spi1_pins_sleep { + pinctrl-single,pins = < + AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + ecap0_pins_default: backlight_pins_default { pinctrl-single,pins = < AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */ @@ -290,6 +360,33 @@ pinctrl-0 = <&i2c2_pins_default>; pinctrl-1 = <&i2c2_pins_sleep>; clock-frequency = <100000>; + + tpic2810: tpic2810@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi1_pins_default>; + pinctrl-1 = <&spi1_pins_sleep>; + ti,pindir-d0-out-d1-in; + + sn65hvs882: sn65hvs882@0 { + compatible = "pisosr-gpio"; + gpio-controller; + #gpio-cells = <2>; + + load-gpios = <&gpio3 1 GPIO_ACTIVE_LOW>; + + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + }; }; &epwmss0 { @@ -310,6 +407,10 @@ status = "okay"; }; +&gpio3 { + status = "okay"; +}; + &gpio4 { status = "okay"; }; diff --git a/dts/src/arm/am571x-idk.dts b/dts/src/arm/am571x-idk.dts new file mode 100644 index 0000000000..d6e43e5184 --- /dev/null +++ b/dts/src/arm/am571x-idk.dts @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "dra72x.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "am57xx-idk-common.dtsi" + +/ { + model = "TI AM5718 IDK"; + compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7"; + + memory@80000000 { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + cpu0-led { + label = "status0:red:cpu0"; + gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "cpu0"; + }; + + usr0-led { + label = "status0:green:usr"; + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + heartbeat-led { + label = "status0:blue:heartbeat"; + gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + usr1-led { + label = "status1:red:usr"; + gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + usr2-led { + label = "status1:green:usr"; + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + mmc0-led { + label = "status1:blue:mmc0"; + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + }; + + extcon_usb2: extcon_usb2 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; + }; +}; + +&mmc1 { + status = "okay"; + vmmc-supply = <&ldo1_reg>; + bus-width = <4>; + cd-gpios = <&gpio6 27 0>; /* gpio 219 */ +}; + +&omap_dwc3_2 { + extcon = <&extcon_usb2>; +}; diff --git a/dts/src/arm/am572x-idk.dts b/dts/src/arm/am572x-idk.dts index 87bbc66f0f..27d9149ced 100644 --- a/dts/src/arm/am572x-idk.dts +++ b/dts/src/arm/am572x-idk.dts @@ -83,3 +83,7 @@ bus-width = <4>; cd-gpios = <&gpio6 27 0>; /* gpio 219 */ }; + +&sn65hvs882 { + load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; +}; diff --git a/dts/src/arm/am57xx-beagle-x15-common.dtsi b/dts/src/arm/am57xx-beagle-x15-common.dtsi index 6df7829a2c..78bee26361 100644 --- a/dts/src/arm/am57xx-beagle-x15-common.dtsi +++ b/dts/src/arm/am57xx-beagle-x15-common.dtsi @@ -204,6 +204,7 @@ interrupt-controller; ti,system-power-controller; + ti,palmas-override-powerhold; tps659038_pmic { compatible = "ti,tps659038-pmic"; diff --git a/dts/src/arm/am57xx-idk-common.dtsi b/dts/src/arm/am57xx-idk-common.dtsi index 03cec62260..555ae21f2b 100644 --- a/dts/src/arm/am57xx-idk-common.dtsi +++ b/dts/src/arm/am57xx-idk-common.dtsi @@ -43,6 +43,58 @@ regulator-always-on; regulator-boot-on; }; + + leds-iio { + status = "disabled"; + compatible = "gpio-leds"; + led-out0 { + label = "out0"; + gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out1 { + label = "out1"; + gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out2 { + label = "out2"; + gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out3 { + label = "out3"; + gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out4 { + label = "out4"; + gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out5 { + label = "out5"; + gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out6 { + label = "out6"; + gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + led-out7 { + label = "out7"; + gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; }; &i2c1 { @@ -57,6 +109,7 @@ #interrupt-cells = <2>; interrupt-controller; ti,system-power-controller; + ti,palmas-override-powerhold; tps659038_pmic { compatible = "ti,tps659038-pmic"; @@ -253,6 +306,28 @@ }; }; +&mcspi3 { + status = "okay"; + ti,pindir-d0-out-d1-in; + + sn65hvs882: sn65hvs882@0 { + compatible = "pisosr-gpio"; + gpio-controller; + #gpio-cells = <2>; + + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + }; + + tpic2810: tpic2810@60 { + compatible = "ti,tpic2810"; + reg = <0x60>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &uart3 { status = "okay"; interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH diff --git a/dts/src/arm/armada-370-db.dts b/dts/src/arm/armada-370-db.dts index 033fa63544..a9419f8e17 100644 --- a/dts/src/arm/armada-370-db.dts +++ b/dts/src/arm/armada-370-db.dts @@ -67,7 +67,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x40000000>; /* 1 GB */ }; @@ -86,18 +86,6 @@ status = "okay"; }; - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - ethernet@70000 { pinctrl-0 = <&ge0_rgmii_pins>; pinctrl-names = "default"; @@ -182,24 +170,6 @@ }; }; }; - - pcie-controller { - status = "okay"; - /* - * The two PCIe units are accessible through - * both standard PCIe slots and mini-PCIe - * slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; }; sound { @@ -261,6 +231,37 @@ }; }; +&pciec { + status = "okay"; + /* + * The two PCIe units are accessible through + * both standard PCIe slots and mini-PCIe + * slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + + &spi0 { pinctrl-0 = <&spi0_pins2>; pinctrl-names = "default"; diff --git a/dts/src/arm/armada-370-dlink-dns327l.dts b/dts/src/arm/armada-370-dlink-dns327l.dts index e2a363b1dd..aeedc463da 100644 --- a/dts/src/arm/armada-370-dlink-dns327l.dts +++ b/dts/src/arm/armada-370-dlink-dns327l.dts @@ -62,7 +62,7 @@ stdout-path = &uart0; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MiB */ }; @@ -72,20 +72,6 @@ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; - pcie-controller { - status = "okay"; - - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { sata@a0000 { nr-ports = <2>; @@ -262,6 +248,20 @@ }; }; +&pciec { + status = "okay"; + + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + &pinctrl { sata_l_white_pin: sata-l-white-pin { marvell,pins = "mpp57"; diff --git a/dts/src/arm/armada-370-mirabox.dts b/dts/src/arm/armada-370-mirabox.dts index d5e19cd4d2..a1425409e5 100644 --- a/dts/src/arm/armada-370-mirabox.dts +++ b/dts/src/arm/armada-370-mirabox.dts @@ -54,7 +54,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; @@ -64,22 +64,6 @@ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; - pcie-controller { - status = "okay"; - - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Connected on the PCB to a USB 3.0 XHCI controller */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { serial@12000 { status = "okay"; @@ -113,17 +97,6 @@ }; }; - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; ethernet@70000 { pinctrl-0 = <&ge0_rgmii_pins>; pinctrl-names = "default"; @@ -197,6 +170,34 @@ }; }; +&pciec { + status = "okay"; + + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected on the PCB to a USB 3.0 XHCI controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &pinctrl { pwr_led_pin: pwr-led-pin { marvell,pins = "mpp63"; diff --git a/dts/src/arm/armada-370-netgear-rn102.dts b/dts/src/arm/armada-370-netgear-rn102.dts index 39181b3fa9..6bd9265f10 100644 --- a/dts/src/arm/armada-370-netgear-rn102.dts +++ b/dts/src/arm/armada-370-netgear-rn102.dts @@ -56,7 +56,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; @@ -66,22 +66,6 @@ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; - pcie-controller { - status = "okay"; - - /* Connected to Marvell 88SE9170 SATA controller */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Connected to FL1009 USB 3.0 controller */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { /* RTC is provided by Intersil ISL12057 I2C RTC chip */ @@ -99,14 +83,6 @@ status = "okay"; }; - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - phy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - }; - }; - ethernet@74000 { pinctrl-0 = <&ge1_rgmii_pins>; pinctrl-names = "default"; @@ -120,8 +96,11 @@ }; i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; clock-frequency = <100000>; + + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; isl12057: isl12057@68 { @@ -257,6 +236,30 @@ }; }; +&pciec { + status = "okay"; + + /* Connected to Marvell 88SE9170 SATA controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected to FL1009 USB 3.0 controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + }; +}; + &pinctrl { power_led_pin: power-led-pin { marvell,pins = "mpp57"; diff --git a/dts/src/arm/armada-370-netgear-rn104.dts b/dts/src/arm/armada-370-netgear-rn104.dts index 11565752b9..c84ab5bf1e 100644 --- a/dts/src/arm/armada-370-netgear-rn104.dts +++ b/dts/src/arm/armada-370-netgear-rn104.dts @@ -56,7 +56,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; @@ -66,22 +66,6 @@ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; - pcie-controller { - status = "okay"; - - /* Connected to FL1009 USB 3.0 controller */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Connected to Marvell 88SE9215 SATA controller */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { /* RTC is provided by Intersil ISL12057 I2C RTC chip */ @@ -93,18 +77,6 @@ status = "okay"; }; - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - phy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - }; - - phy1: ethernet-phy@1 { /* Marvell 88E1318 */ - reg = <1>; - }; - }; - ethernet@70000 { pinctrl-0 = <&ge0_rgmii_pins>; pinctrl-names = "default"; @@ -126,8 +98,11 @@ }; i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; clock-frequency = <100000>; + + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; isl12057: isl12057@68 { @@ -279,6 +254,34 @@ }; }; +&pciec { + status = "okay"; + + /* Connected to FL1009 USB 3.0 controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected to Marvell 88SE9215 SATA controller */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1318 */ + reg = <1>; + }; +}; + &pinctrl { poweroff: poweroff { marvell,pins = "mpp60"; diff --git a/dts/src/arm/armada-370-rd.dts b/dts/src/arm/armada-370-rd.dts index fbef730e8d..c3fd6e4921 100644 --- a/dts/src/arm/armada-370-rd.dts +++ b/dts/src/arm/armada-370-rd.dts @@ -67,7 +67,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; @@ -77,22 +77,6 @@ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; - pcie-controller { - status = "okay"; - - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Internal mini-PCIe connector */ - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { serial@12000 { status = "okay"; @@ -102,14 +86,6 @@ status = "okay"; }; - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; - ethernet@70000 { status = "okay"; phy = <&phy0>; @@ -146,7 +122,7 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - button@1 { + button { label = "Software Button"; linux,code = <KEY_POWER>; gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; @@ -196,7 +172,7 @@ }; }; - dsa@0 { + dsa { compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -235,7 +211,32 @@ }; }; }; - }; +}; + +&pciec { + status = "okay"; + + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Internal mini-PCIe connector */ + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &pinctrl { fan_pins: fan-pins { diff --git a/dts/src/arm/armada-370-seagate-nas-4bay.dts b/dts/src/arm/armada-370-seagate-nas-4bay.dts index ae2e1fe50e..eb6af53b49 100644 --- a/dts/src/arm/armada-370-seagate-nas-4bay.dts +++ b/dts/src/arm/armada-370-seagate-nas-4bay.dts @@ -28,20 +28,7 @@ compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp"; soc { - pcie-controller { - /* SATA AHCI controller 88SE9170 */ - pcie@1,0 { - status = "okay"; - }; - }; - internal-regs { - mdio { - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - ethernet@74000 { status = "okay"; pinctrl-0 = <&ge1_rgmii_pins>; @@ -131,3 +118,17 @@ 1300 0>; }; }; + +&pciec { + /* SATA AHCI controller 88SE9170 */ + pcie@1,0 { + status = "okay"; + }; +}; + +&mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + diff --git a/dts/src/arm/armada-370-seagate-nas-xbay.dtsi b/dts/src/arm/armada-370-seagate-nas-xbay.dtsi index 3036e25c59..e9a5b952af 100644 --- a/dts/src/arm/armada-370-seagate-nas-xbay.dtsi +++ b/dts/src/arm/armada-370-seagate-nas-xbay.dtsi @@ -23,7 +23,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; @@ -32,15 +32,6 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; - pcie-controller { - status = "okay"; - - /* USB 3.0 bridge ASM1042A */ - pcie@2,0 { - status = "okay"; - }; - }; - internal-regs { serial@12000 { status = "okay"; @@ -51,15 +42,6 @@ status = "okay"; }; - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; - ethernet@70000 { status = "okay"; pinctrl-0 = <&ge0_rgmii_pins>; @@ -159,19 +141,19 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + power { label = "Power button"; linux,code = <KEY_POWER>; gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - button@2 { + backup { label = "Backup button"; linux,code = <KEY_OPTION>; gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - button@3 { + reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; @@ -208,6 +190,25 @@ }; }; +&pciec { + status = "okay"; + + /* USB 3.0 bridge ASM1042A */ + pcie@2,0 { + status = "okay"; + }; +}; + + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &pinctrl { pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>; pinctrl-names = "default"; diff --git a/dts/src/arm/armada-370-seagate-personal-cloud.dtsi b/dts/src/arm/armada-370-seagate-personal-cloud.dtsi index 01cded310c..d079a89ee5 100644 --- a/dts/src/arm/armada-370-seagate-personal-cloud.dtsi +++ b/dts/src/arm/armada-370-seagate-personal-cloud.dtsi @@ -24,7 +24,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; @@ -33,15 +33,6 @@ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; - pcie-controller { - status = "okay"; - - /* USB 3.0 Bridge ASM1042A */ - pcie@1,0 { - status = "okay"; - }; - }; - internal-regs { coherency-fabric@20200 { broken-idle; @@ -51,15 +42,6 @@ status = "okay"; }; - mdio { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; - ethernet@74000 { status = "okay"; pinctrl-0 = <&ge1_rgmii_pins>; @@ -107,19 +89,19 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + power { label = "Power button"; linux,code = <KEY_POWER>; gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; debounce-interval = <100>; }; - button@2 { + reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - button@3 { + button { label = "USB VBUS error"; linux,code = <KEY_UNKNOWN>; gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; @@ -143,6 +125,24 @@ }; }; +&pciec { + status = "okay"; + + /* USB 3.0 Bridge ASM1042A */ + pcie@1,0 { + status = "okay"; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &pinctrl { pinctrl-0 = <&sata_led_pin>; pinctrl-names = "default"; diff --git a/dts/src/arm/armada-370-synology-ds213j.dts b/dts/src/arm/armada-370-synology-ds213j.dts index a9cc427768..99f9de229e 100644 --- a/dts/src/arm/armada-370-synology-ds213j.dts +++ b/dts/src/arm/armada-370-synology-ds213j.dts @@ -70,7 +70,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x20000000>; /* 512 MB */ }; @@ -127,12 +127,6 @@ status = "okay"; }; - mdio { - phy1: ethernet-phy@1 { /* Marvell 88E1512 */ - reg = <1>; - }; - }; - ethernet@70000 { status = "okay"; phy = <&phy1>; @@ -192,7 +186,7 @@ pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>; pinctrl-names = "default"; - sata1_regulator: sata1-regulator { + sata1_regulator: sata1-regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "SATA1 Power"; @@ -205,7 +199,7 @@ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; - sata2_regulator: sata2-regulator { + sata2_regulator: sata2-regulator@2 { compatible = "regulator-fixed"; reg = <2>; regulator-name = "SATA2 Power"; @@ -220,6 +214,12 @@ }; }; +&mdio { + phy1: ethernet-phy@1 { /* Marvell 88E1512 */ + reg = <1>; + }; +}; + &pinctrl { disk1_led_pin: disk1-led-pin { marvell,pins = "mpp31"; diff --git a/dts/src/arm/armada-370-xp.dtsi b/dts/src/arm/armada-370-xp.dtsi index 3ccedc9dff..b0520bdeea 100644 --- a/dts/src/arm/armada-370-xp.dtsi +++ b/dts/src/arm/armada-370-xp.dtsi @@ -50,8 +50,6 @@ * 370 and Armada XP SoC. */ -/include/ "skeleton64.dtsi" - #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { @@ -86,7 +84,7 @@ pcie-mem-aperture = <0xf8000000 0x7e00000>; pcie-io-aperture = <0xffe00000 0x100000>; - devbus-bootcs { + devbus_bootcs: devbus-bootcs { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>; ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; @@ -96,7 +94,7 @@ status = "disabled"; }; - devbus-cs0 { + devbus_cs0: devbus-cs0 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>; ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; @@ -106,7 +104,7 @@ status = "disabled"; }; - devbus-cs1 { + devbus_cs1: devbus-cs1 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>; ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; @@ -116,7 +114,7 @@ status = "disabled"; }; - devbus-cs2 { + devbus_cs2: devbus-cs2 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>; ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; @@ -126,7 +124,7 @@ status = "disabled"; }; - devbus-cs3 { + devbus_cs3: devbus-cs3 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>; ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; @@ -142,7 +140,7 @@ #size-cells = <1>; ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; - rtc@10300 { + rtc: rtc@10300 { compatible = "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <50>; @@ -214,33 +212,38 @@ msi-controller; }; - coherency-fabric@20200 { + coherencyfab: coherency-fabric@20200 { compatible = "marvell,coherency-fabric"; reg = <0x20200 0xb0>, <0x21010 0x1c>; }; - timer@20300 { + timer: timer@20300 { reg = <0x20300 0x30>, <0x21040 0x30>; interrupts = <37>, <38>, <39>, <40>, <5>, <6>; }; - watchdog@20300 { + watchdog: watchdog@20300 { reg = <0x20300 0x34>, <0x20704 0x4>; }; - pmsu@22000 { + cpurst: cpurst@20800 { + compatible = "marvell,armada-370-cpu-reset"; + reg = <0x20800 0x8>; + }; + + pmsu: pmsu@22000 { compatible = "marvell,armada-370-pmsu"; reg = <0x22000 0x1000>; }; - usb@50000 { + usb0: usb@50000 { compatible = "marvell,orion-ehci"; reg = <0x50000 0x500>; interrupts = <45>; status = "disabled"; }; - usb@51000 { + usb1: usb@51000 { compatible = "marvell,orion-ehci"; reg = <0x51000 0x500>; interrupts = <46>; @@ -254,7 +257,7 @@ status = "disabled"; }; - mdio: mdio { + mdio: mdio@72004 { #address-cells = <1>; #size-cells = <0>; compatible = "marvell,orion-mdio"; @@ -269,7 +272,7 @@ status = "disabled"; }; - sata@a0000 { + sata: sata@a0000 { compatible = "marvell,armada-370-sata"; reg = <0xa0000 0x5000>; interrupts = <55>; @@ -278,7 +281,7 @@ status = "disabled"; }; - nand@d0000 { + nand: nand@d0000 { compatible = "marvell,armada370-nand"; reg = <0xd0000 0x54>; #address-cells = <1>; @@ -288,7 +291,7 @@ status = "disabled"; }; - mvsdio@d4000 { + sdio: mvsdio@d4000 { compatible = "marvell,orion-sdio"; reg = <0xd4000 0x200>; interrupts = <54>; diff --git a/dts/src/arm/armada-370.dtsi b/dts/src/arm/armada-370.dtsi index b4258105e9..b704bcc597 100644 --- a/dts/src/arm/armada-370.dtsi +++ b/dts/src/arm/armada-370.dtsi @@ -50,9 +50,11 @@ */ #include "armada-370-xp.dtsi" -/include/ "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + model = "Marvell Armada 370 family SoC"; compatible = "marvell,armada370", "marvell,armada-370-xp"; @@ -70,7 +72,7 @@ reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>; }; - pcie-controller { + pciec: pcie-controller@82000000 { compatible = "marvell,armada-370-pcie"; status = "disabled"; device_type = "pci"; @@ -89,7 +91,7 @@ 0x82000000 0x2 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ 0x81000000 0x2 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; - pcie@1,0 { + pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -106,7 +108,7 @@ status = "disabled"; }; - pcie@2,0 { + pcie2: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; reg = <0x1000 0 0 0 0>; @@ -125,7 +127,7 @@ }; internal-regs { - L2: l2-cache { + L2: l2-cache@8000 { compatible = "marvell,aurora-outer-cache"; reg = <0x08000 0x1000>; cache-id-part = <0x100>; @@ -134,14 +136,6 @@ wt-override; }; - i2c0: i2c@11000 { - reg = <0x11000 0x20>; - }; - - i2c1: i2c@11100 { - reg = <0x11100 0x20>; - }; - gpio0: gpio@18100 { compatible = "marvell,orion-gpio"; reg = <0x18100 0x40>; @@ -175,22 +169,8 @@ interrupts = <91>; }; - /* - * Default UART pinctrl setting without RTS/CTS, can - * be overwritten on board level if a different - * configuration is used. - */ - uart0: serial@12000 { - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; - }; - - uart1: serial@12100 { - pinctrl-0 = <&uart1_pins>; - pinctrl-names = "default"; - }; - system-controller@18200 { + systemc: system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; reg = <0x18200 0x100>; }; @@ -208,37 +188,18 @@ #clock-cells = <1>; }; - thermal@18300 { + thermal: thermal@18300 { compatible = "marvell,armada370-thermal"; reg = <0x18300 0x4 0x18304 0x4>; status = "okay"; }; - sscg@18330 { + sscg: sscg@18330 { reg = <0x18330 0x4>; }; - interrupt-controller@20a00 { - reg = <0x20a00 0x1d0>, <0x21870 0x58>; - }; - - timer@20300 { - compatible = "marvell,armada-370-timer"; - clocks = <&coreclk 2>; - }; - - watchdog@20300 { - compatible = "marvell,armada-370-wdt"; - clocks = <&coreclk 2>; - }; - - cpurst@20800 { - compatible = "marvell,armada-370-cpu-reset"; - reg = <0x20800 0x8>; - }; - - cpu-config@21000 { + cpuconf: cpu-config@21000 { compatible = "marvell,armada-370-cpu-config"; reg = <0x21000 0x8>; }; @@ -253,15 +214,7 @@ status = "disabled"; }; - usb@50000 { - clocks = <&coreclk 0>; - }; - - usb@51000 { - clocks = <&coreclk 0>; - }; - - xor@60800 { + xor0: xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 0x60A00 0x100>; @@ -280,7 +233,7 @@ }; }; - xor@60900 { + xor1: xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 0x60b00 0x100>; @@ -299,15 +252,7 @@ }; }; - ethernet@70000 { - compatible = "marvell,armada-370-neta"; - }; - - ethernet@74000 { - compatible = "marvell,armada-370-neta"; - }; - - crypto@90000 { + cesa: crypto@90000 { compatible = "marvell,armada-370-crypto"; reg = <0x90000 0x10000>; reg-names = "regs"; @@ -342,6 +287,59 @@ }; }; +/* + * Default UART pinctrl setting without RTS/CTS, can be overwritten on + * board level if a different configuration is used. + */ + +&uart0 { + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + +&uart1 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; +}; + +&i2c0 { + reg = <0x11000 0x20>; +}; + +&i2c1 { + reg = <0x11100 0x20>; +}; + +&mpic { + reg = <0x20a00 0x1d0>, <0x21870 0x58>; +}; + +&timer { + compatible = "marvell,armada-370-timer"; + clocks = <&coreclk 2>; +}; + +&watchdog { + compatible = "marvell,armada-370-wdt"; + clocks = <&coreclk 2>; +}; + +&usb0 { + clocks = <&coreclk 0>; +}; + +&usb1 { + clocks = <&coreclk 0>; +}; + +ð0 { + compatible = "marvell,armada-370-neta"; +}; + +ð1 { + compatible = "marvell,armada-370-neta"; +}; + &pinctrl { compatible = "marvell,mv88f6710-pinctrl"; diff --git a/dts/src/arm/armada-375-db.dts b/dts/src/arm/armada-375-db.dts index cded5f0a26..ef45cbeb3e 100644 --- a/dts/src/arm/armada-375-db.dts +++ b/dts/src/arm/armada-375-db.dts @@ -58,7 +58,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x40000000>; /* 1 GB */ }; @@ -69,138 +69,141 @@ MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000 MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>; - internal-regs { - spi@10600 { - pinctrl-0 = <&spi0_pins>; - pinctrl-names = "default"; - /* - * SPI conflicts with NAND, so we disable it - * here, and select NAND as the enabled device - * by default. - */ - status = "disabled"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q128a13", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - }; - - i2c@11000 { - status = "okay"; - clock-frequency = <100000>; - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - }; - - i2c@11100 { - status = "okay"; - clock-frequency = <100000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - }; - - serial@12000 { - status = "okay"; - }; - - pinctrl { - sdio_st_pins: sdio-st-pins { - marvell,pins = "mpp44", "mpp45"; - marvell,function = "gpio"; - }; - }; - - sata@a0000 { - status = "okay"; - nr-ports = <2>; - }; - - nand: nand@d0000 { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - num-cs = <1>; - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; - nand-ecc-strength = <4>; - nand-ecc-step-size = <512>; - - partition@0 { - label = "U-Boot"; - reg = <0 0x800000>; - }; - partition@800000 { - label = "Linux"; - reg = <0x800000 0x800000>; - }; - partition@1000000 { - label = "Filesystem"; - reg = <0x1000000 0x3f000000>; - }; - }; - - usb@54000 { - status = "okay"; - }; - - usb3@58000 { - status = "okay"; - }; - - mvsdio@d4000 { - pinctrl-0 = <&sdio_pins &sdio_st_pins>; - pinctrl-names = "default"; - status = "okay"; - cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; - wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; - - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy3: ethernet-phy@3 { - reg = <3>; - }; - }; - - ethernet@f0000 { - status = "okay"; - - eth0@c4000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - - eth1@c5000 { - status = "okay"; - phy = <&phy3>; - phy-mode = "gmii"; - }; - }; - }; - - pcie-controller { - status = "okay"; - /* - * The two PCIe units are accessible through - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; }; }; +&pciec { + status = "okay"; +}; + +/* + * The two PCIe units are accessible through + * standard PCIe slots on the board. + */ +&pcie0 { + /* Port 0, Lane 0 */ + status = "okay"; +}; + +&pcie1 { + /* Port 1, Lane 0 */ + status = "okay"; +}; + + +&spi0 { + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; + + /* + * SPI conflicts with NAND, so we disable it here, and + * select NAND as the enabled device by default. + */ + + status = "disabled"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; +}; + +&uart0 { + status = "okay"; +}; + +&pinctrl { + sdio_st_pins: sdio-st-pins { + marvell,pins = "mpp44", "mpp45"; + marvell,function = "gpio"; + }; +}; + +&sata { + status = "okay"; + nr-ports = <2>; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; + +&sdio { + pinctrl-0 = <&sdio_pins &sdio_st_pins>; + pinctrl-names = "default"; + status = "okay"; + cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; +}; + +&mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy3: ethernet-phy@3 { + reg = <3>; + }; +}; + +ðernet { + status = "okay"; +}; + + +ð0 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +ð1 { + status = "okay"; + phy = <&phy3>; + phy-mode = "gmii"; +}; diff --git a/dts/src/arm/armada-375.dtsi b/dts/src/arm/armada-375.dtsi index cc952cf8ec..f515591e87 100644 --- a/dts/src/arm/armada-375.dtsi +++ b/dts/src/arm/armada-375.dtsi @@ -45,7 +45,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/phy/phy.h> @@ -53,6 +52,9 @@ #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) / { + #address-cells = <1>; + #size-cells = <1>; + model = "Marvell Armada 375 family SoC"; compatible = "marvell,armada375"; @@ -65,7 +67,7 @@ }; clocks { - /* 2 GHz fixed main PLL */ + /* 1 GHz fixed main PLL */ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>; @@ -84,12 +86,12 @@ #size-cells = <0>; enable-method = "marvell,armada-375-smp"; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; @@ -115,7 +117,7 @@ reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>; }; - devbus-bootcs { + devbus_bootcs: devbus-bootcs { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>; ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>; @@ -125,7 +127,7 @@ status = "disabled"; }; - devbus-cs0 { + devbus_cs0: devbus-cs0 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>; ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>; @@ -135,7 +137,7 @@ status = "disabled"; }; - devbus-cs1 { + devbus_cs1: devbus-cs1 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>; ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>; @@ -145,7 +147,7 @@ status = "disabled"; }; - devbus-cs2 { + devbus_cs2: devbus-cs2 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>; ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>; @@ -155,7 +157,7 @@ status = "disabled"; }; - devbus-cs3 { + devbus_cs3: devbus-cs3 { compatible = "marvell,mvebu-devbus"; reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>; ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>; @@ -182,12 +184,12 @@ prefetch-data = <1>; }; - scu@c000 { + scu: scu@c000 { compatible = "arm,cortex-a9-scu"; reg = <0xc000 0x58>; }; - timer@c600 { + timer0: timer@c600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xc600 0x20>; interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>; @@ -203,7 +205,7 @@ <0xc100 0x100>; }; - mdio { + mdio: mdio@c0054 { #address-cells = <1>; #size-cells = <0>; compatible = "marvell,orion-mdio"; @@ -212,7 +214,7 @@ }; /* Network controller */ - ethernet@f0000 { + ethernet: ethernet@f0000 { compatible = "marvell,armada-375-pp2"; reg = <0xf0000 0xa000>, /* Packet Processor regs */ <0xc0000 0x3060>, /* LMS regs */ @@ -222,20 +224,20 @@ clock-names = "pp_clk", "gop_clk"; status = "disabled"; - eth0: eth0@c4000 { + eth0: eth0 { interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; port-id = <0>; status = "disabled"; }; - eth1: eth1@c5000 { + eth1: eth1 { interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; port-id = <1>; status = "disabled"; }; }; - rtc@10300 { + rtc: rtc@10300 { compatible = "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; @@ -307,7 +309,7 @@ status = "disabled"; }; - pinctrl { + pinctrl: pinctrl@18000 { compatible = "marvell,mv88f6720-pinctrl"; reg = <0x18000 0x24>; @@ -382,7 +384,7 @@ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; }; - system-controller@18200 { + systemc: system-controller@18200 { compatible = "marvell,armada-375-system-controller"; reg = <0x18200 0x100>; }; @@ -415,7 +417,7 @@ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; }; - timer@20300 { + timer1: timer@20300 { compatible = "marvell,armada-375-timer", "marvell,armada-370-timer"; reg = <0x20300 0x30>, <0x21040 0x30>; interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, @@ -428,24 +430,24 @@ clock-names = "nbclk", "fixed"; }; - watchdog@20300 { + watchdog: watchdog@20300 { compatible = "marvell,armada-375-wdt"; reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>; clocks = <&coreclk 0>, <&refclk>; clock-names = "nbclk", "fixed"; }; - cpurst@20800 { + cpurst: cpurst@20800 { compatible = "marvell,armada-370-cpu-reset"; reg = <0x20800 0x10>; }; - coherency-fabric@21010 { + coherencyfab: coherency-fabric@21010 { compatible = "marvell,armada-375-coherency-fabric"; reg = <0x21010 0x1c>; }; - usb@50000 { + usb0: usb@50000 { compatible = "marvell,orion-ehci"; reg = <0x50000 0x500>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; @@ -455,7 +457,7 @@ status = "disabled"; }; - usb@54000 { + usb1: usb@54000 { compatible = "marvell,orion-ehci"; reg = <0x54000 0x500>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; @@ -463,7 +465,7 @@ status = "disabled"; }; - usb3@58000 { + usb2: usb3@58000 { compatible = "marvell,armada-375-xhci"; reg = <0x58000 0x20000>,<0x5b880 0x80>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; @@ -473,7 +475,7 @@ status = "disabled"; }; - xor@60800 { + xor0: xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 0x60A00 0x100>; @@ -493,7 +495,7 @@ }; }; - xor@60900 { + xor1: xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 0x60b00 0x100>; @@ -513,7 +515,7 @@ }; }; - crypto@90000 { + cesa: crypto@90000 { compatible = "marvell,armada-375-crypto"; reg = <0x90000 0x10000>; reg-names = "regs"; @@ -528,7 +530,7 @@ marvell,crypto-sram-size = <0x800>; }; - sata@a0000 { + sata: sata@a0000 { compatible = "marvell,armada-370-sata"; reg = <0xa0000 0x5000>; interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; @@ -537,7 +539,7 @@ status = "disabled"; }; - nand@d0000 { + nand: nand@d0000 { compatible = "marvell,armada370-nand"; reg = <0xd0000 0x54>; #address-cells = <1>; @@ -547,7 +549,7 @@ status = "disabled"; }; - mvsdio@d4000 { + sdio: mvsdio@d4000 { compatible = "marvell,orion-sdio"; reg = <0xd4000 0x200>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; @@ -559,7 +561,7 @@ status = "disabled"; }; - thermal@e8078 { + thermal: thermal@e8078 { compatible = "marvell,armada375-thermal"; reg = <0xe8078 0x4>, <0xe807c 0x8>; status = "okay"; @@ -580,7 +582,7 @@ }; }; - pcie-controller { + pciec: pcie-controller@82000000 { compatible = "marvell,armada-370-pcie"; status = "disabled"; device_type = "pci"; @@ -599,7 +601,7 @@ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO */>; - pcie@1,0 { + pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -616,7 +618,7 @@ status = "disabled"; }; - pcie@2,0 { + pcie1: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; diff --git a/dts/src/arm/armada-385-turris-omnia.dts b/dts/src/arm/armada-385-turris-omnia.dts new file mode 100644 index 0000000000..ab49acb2d4 --- /dev/null +++ b/dts/src/arm/armada-385-turris-omnia.dts @@ -0,0 +1,340 @@ +/* + * Device Tree file for the Turris Omnia + * + * Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org> + * Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-385.dtsi" + +/ { + model = "Turris Omnia"; + compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380"; + + chosen { + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1024 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + + internal-regs { + + /* USB part of the PCIe2/USB 2.0 port */ + usb@58000 { + status = "okay"; + }; + + sata@a8000 { + status = "okay"; + }; + + sdhci@d8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; + status = "okay"; + + bus-width = <8>; + no-1-8-v; + non-removable; + }; + + usb3@f0000 { + status = "okay"; + }; + + usb3@f8000 { + status = "okay"; + }; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + + pcie@3,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + }; + }; +}; + +/* Connected to 88E6176 switch, port 6 */ +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&ge0_rgmii_pins>; + status = "okay"; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +/* Connected to 88E6176 switch, port 5 */ +ð1 { + pinctrl-names = "default"; + pinctrl-0 = <&ge1_rgmii_pins>; + status = "okay"; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +/* WAN port */ +ð2 { + status = "okay"; + phy-mode = "sgmii"; + phy = <&phy1>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + i2cmux@70 { + compatible = "nxp,pca9547"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + status = "okay"; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + /* STM32F0 command interface at address 0x2a */ + /* leds device (in STM32F0) at address 0x2b */ + + eeprom@54 { + compatible = "at,24c64"; + reg = <0x54>; + + /* The EEPROM contains data for bootloader. + * Contents: + * struct omnia_eeprom { + * u32 magic; (=0x0341a034 in LE) + * u32 ramsize; (in GiB) + * char regdomain[4]; + * u32 crc32; + * }; + */ + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + /* routed to PCIe0/mSATA connector (CN7A) */ + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + /* routed to PCIe1/USB2 connector (CN61A) */ + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + /* routed to PCIe2 connector (CN62A) */ + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + /* routed to SFP+ */ + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + /* ATSHA204A at address 0x64 */ + }; + + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + /* exposed on pin header */ + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + pcawan: gpio@71 { + /* + * GPIO expander for SFP+ signals and + * and phy irq + */ + compatible = "nxp,pca9538"; + reg = <0x71>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcawan_pins>; + + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + + phy1: phy@1 { + status = "okay"; + compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + + /* irq is connected to &pcawan pin 7 */ + }; + + /* Switch MV88E7176 at address 0x10 */ +}; + +&pinctrl { + pcawan_pins: pcawan-pins { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + spi0cs0_pins: spi0cs0-pins { + marvell,pins = "mpp25"; + marvell,function = "spi0"; + }; + + spi0cs1_pins: spi0cs1-pins { + marvell,pins = "mpp26"; + marvell,function = "spi0"; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins &spi0cs0_pins>; + status = "okay"; + + spi-nor@0 { + compatible = "spansion,s25fl164k", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x00100000>; + label = "U-Boot"; + }; + + partition@100000 { + reg = <0x00100000 0x00700000>; + label = "Rescue system"; + }; + }; + }; + + /* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */ +}; + +&uart0 { + /* Pin header CN10 */ + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + /* Pin header CN11 */ + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +}; diff --git a/dts/src/arm/armada-38x.dtsi b/dts/src/arm/armada-38x.dtsi index 2d7668848c..7450e9fea4 100644 --- a/dts/src/arm/armada-38x.dtsi +++ b/dts/src/arm/armada-38x.dtsi @@ -661,7 +661,7 @@ }; clocks { - /* 2 GHz fixed main PLL */ + /* 1 GHz fixed main PLL */ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/dts/src/arm/armada-39x.dtsi b/dts/src/arm/armada-39x.dtsi index 34cba87f92..de171baffc 100644 --- a/dts/src/arm/armada-39x.dtsi +++ b/dts/src/arm/armada-39x.dtsi @@ -573,7 +573,7 @@ }; clocks { - /* 2 GHz fixed main PLL */ + /* 1 GHz fixed main PLL */ mainpll: mainpll { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/dts/src/arm/armada-xp-axpwifiap.dts b/dts/src/arm/armada-xp-axpwifiap.dts index ce152719bc..1e1fc4fccb 100644 --- a/dts/src/arm/armada-xp-axpwifiap.dts +++ b/dts/src/arm/armada-xp-axpwifiap.dts @@ -62,7 +62,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */ }; @@ -73,28 +73,6 @@ MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; - pcie-controller { - status = "okay"; - - /* First mini-PCIe port */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Second mini-PCIe port */ - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; - }; - - /* Renesas uPD720202 USB 3.0 controller */ - pcie@3,0 { - /* Port 0, Lane 3 */ - status = "okay"; - }; - }; - internal-regs { /* UART0 */ serial@12000 { @@ -111,16 +89,6 @@ status = "okay"; }; - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - ethernet@70000 { pinctrl-0 = <&ge0_rgmii_pins>; pinctrl-names = "default"; @@ -145,7 +113,7 @@ pinctrl-0 = <&keys_pin>; pinctrl-names = "default"; - button@1 { + reset { label = "Factory Reset Button"; linux,code = <KEY_SETUP>; gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; @@ -153,6 +121,38 @@ }; }; +&mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&pciec { + status = "okay"; + + /* First mini-PCIe port */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Second mini-PCIe port */ + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + + /* Renesas uPD720202 USB 3.0 controller */ + pcie@3,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; +}; + &pinctrl { pinctrl-0 = <&phy_int_pin>; pinctrl-names = "default"; diff --git a/dts/src/arm/armada-xp-db.dts b/dts/src/arm/armada-xp-db.dts index 075120bc3e..44a724d39d 100644 --- a/dts/src/arm/armada-xp-db.dts +++ b/dts/src/arm/armada-xp-db.dts @@ -67,7 +67,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0 0x00000000 0 0x80000000>; /* 2 GB */ }; @@ -108,39 +108,6 @@ }; }; - pcie-controller { - status = "okay"; - - /* - * All 6 slots are physically present as - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; - }; - pcie@3,0 { - /* Port 0, Lane 2 */ - status = "okay"; - }; - pcie@4,0 { - /* Port 0, Lane 3 */ - status = "okay"; - }; - pcie@9,0 { - /* Port 2, Lane 0 */ - status = "okay"; - }; - pcie@10,0 { - /* Port 3, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { serial@12000 { status = "okay"; @@ -160,24 +127,6 @@ status = "okay"; }; - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - - phy2: ethernet-phy@2 { - reg = <25>; - }; - - phy3: ethernet-phy@3 { - reg = <27>; - }; - }; - ethernet@70000 { status = "okay"; phy = <&phy0>; @@ -266,6 +215,57 @@ }; }; +&pciec { + status = "okay"; + + /* + * All 6 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + pcie@3,0 { + /* Port 0, Lane 2 */ + status = "okay"; + }; + pcie@4,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + + phy2: ethernet-phy@2 { + reg = <25>; + }; + + phy3: ethernet-phy@3 { + reg = <27>; + }; +}; + &spi0 { status = "okay"; diff --git a/dts/src/arm/armada-xp-gp.dts b/dts/src/arm/armada-xp-gp.dts index 190e4eccb1..72cb8fa377 100644 --- a/dts/src/arm/armada-xp-gp.dts +++ b/dts/src/arm/armada-xp-gp.dts @@ -68,7 +68,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; /* * 8 GB of plug-in RAM modules by default.The amount @@ -127,27 +127,6 @@ }; }; - pcie-controller { - status = "okay"; - - /* - * The 3 slots are physically present as - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@9,0 { - /* Port 2, Lane 0 */ - status = "okay"; - }; - pcie@10,0 { - /* Port 3, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { serial@12000 { status = "okay"; @@ -175,24 +154,6 @@ status = "okay"; }; - mdio { - phy0: ethernet-phy@0 { - reg = <16>; - }; - - phy1: ethernet-phy@1 { - reg = <17>; - }; - - phy2: ethernet-phy@2 { - reg = <18>; - }; - - phy3: ethernet-phy@3 { - reg = <19>; - }; - }; - ethernet@70000 { status = "okay"; phy = <&phy0>; @@ -251,6 +212,45 @@ }; }; +&pciec { + status = "okay"; + + /* + * The 3 slots are physically present as + * standard PCIe slots on the board. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + pcie@9,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + pcie@10,0 { + /* Port 3, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + phy0: ethernet-phy@0 { + reg = <16>; + }; + + phy1: ethernet-phy@1 { + reg = <17>; + }; + + phy2: ethernet-phy@2 { + reg = <18>; + }; + + phy3: ethernet-phy@3 { + reg = <19>; + }; +}; + &spi0 { status = "okay"; diff --git a/dts/src/arm/armada-xp-lenovo-ix4-300d.dts b/dts/src/arm/armada-xp-lenovo-ix4-300d.dts index 8af463f26e..d848ae9007 100644 --- a/dts/src/arm/armada-xp-lenovo-ix4-300d.dts +++ b/dts/src/arm/armada-xp-lenovo-ix4-300d.dts @@ -57,7 +57,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0 0x00000000 0 0x20000000>; /* 512MB */ }; @@ -68,37 +68,11 @@ MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; - pcie-controller { - status = "okay"; - - /* Quad port sata: Marvell 88SX7042 */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* USB 3.0 xHCI controller: NEC D720200F1 */ - pcie@5,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { serial@12000 { status = "okay"; }; - mdio { - phy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - }; - - phy1: ethernet-phy@1 { /* Marvell 88E1318 */ - reg = <1>; - }; - }; - ethernet@70000 { pinctrl-0 = <&ge0_rgmii_pins>; pinctrl-names = "default"; @@ -295,6 +269,31 @@ gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; }; }; +&pciec { + status = "okay"; + + /* Quad port sata: Marvell 88SX7042 */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* USB 3.0 xHCI controller: NEC D720200F1 */ + pcie@5,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1318 */ + reg = <1>; + }; +}; &pinctrl { poweroff_pin: poweroff-pin { diff --git a/dts/src/arm/armada-xp-linksys-mamba.dts b/dts/src/arm/armada-xp-linksys-mamba.dts index 076f27f22c..83ac884c0f 100644 --- a/dts/src/arm/armada-xp-linksys-mamba.dts +++ b/dts/src/arm/armada-xp-linksys-mamba.dts @@ -62,7 +62,7 @@ stdout-path = &uart0; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */ }; @@ -73,28 +73,6 @@ MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; - pcie-controller { - status = "okay"; - - /* Etron EJ168 USB 3.0 controller */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* First mini-PCIe port */ - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; - }; - - /* Second mini-PCIe port */ - pcie@3,0 { - /* Port 0, Lane 3 */ - status = "okay"; - }; - }; - internal-regs { rtc@10300 { @@ -289,13 +267,13 @@ pinctrl-0 = <&keys_pin>; pinctrl-names = "default"; - button@1 { + wps { label = "WPS"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; }; - button@2 { + reset { label = "Factory Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; @@ -323,7 +301,7 @@ 4500 1>; }; - dsa@0 { + dsa { compatible = "marvell,dsa"; #address-cells = <2>; #size-cells = <0>; @@ -369,6 +347,28 @@ }; }; +&pciec { + status = "okay"; + + /* Etron EJ168 USB 3.0 controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* First mini-PCIe port */ + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + + /* Second mini-PCIe port */ + pcie@3,0 { + /* Port 0, Lane 3 */ + status = "okay"; + }; +}; + &pinctrl { keys_pin: keys-pin { diff --git a/dts/src/arm/armada-xp-matrix.dts b/dts/src/arm/armada-xp-matrix.dts index 6522b04f4a..16277380e7 100644 --- a/dts/src/arm/armada-xp-matrix.dts +++ b/dts/src/arm/armada-xp-matrix.dts @@ -55,7 +55,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; /* * This board has 4 GB of RAM, but the last 256 MB of @@ -99,18 +99,18 @@ }; }; - pcie-controller { - status = "okay"; - - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - }; - usb@50000 { status = "okay"; }; }; }; }; + +&pciec { + status = "okay"; + + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; +}; diff --git a/dts/src/arm/armada-xp-mv78230.dtsi b/dts/src/arm/armada-xp-mv78230.dtsi index 6e6d0f04bf..05c164b578 100644 --- a/dts/src/arm/armada-xp-mv78230.dtsi +++ b/dts/src/arm/armada-xp-mv78230.dtsi @@ -86,7 +86,7 @@ * configured as x4 or quad x1 lanes. One unit is * x1 only. */ - pcie-controller { + pciec: pcie-controller@82000000 { compatible = "marvell,armada-xp-pcie"; status = "disabled"; device_type = "pci"; @@ -114,7 +114,7 @@ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>; - pcie@1,0 { + pcie1: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -131,7 +131,7 @@ status = "disabled"; }; - pcie@2,0 { + pcie2: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; @@ -148,7 +148,7 @@ status = "disabled"; }; - pcie@3,0 { + pcie3: pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; @@ -165,7 +165,7 @@ status = "disabled"; }; - pcie@4,0 { + pcie4: pcie@4,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; @@ -182,7 +182,7 @@ status = "disabled"; }; - pcie@5,0 { + pcie5: pcie@5,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; reg = <0x2800 0 0 0 0>; diff --git a/dts/src/arm/armada-xp-mv78260.dtsi b/dts/src/arm/armada-xp-mv78260.dtsi index c5fdc99f0d..07894b0d3e 100644 --- a/dts/src/arm/armada-xp-mv78260.dtsi +++ b/dts/src/arm/armada-xp-mv78260.dtsi @@ -87,7 +87,7 @@ * configured as x4 or quad x1 lanes. One unit is * x4 only. */ - pcie-controller { + pciec: pcie-controller@82000000 { compatible = "marvell,armada-xp-pcie"; status = "disabled"; device_type = "pci"; @@ -129,7 +129,7 @@ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>; - pcie@1,0 { + pcie1: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -146,7 +146,7 @@ status = "disabled"; }; - pcie@2,0 { + pcie2: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; @@ -163,7 +163,7 @@ status = "disabled"; }; - pcie@3,0 { + pcie3: pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; @@ -180,7 +180,7 @@ status = "disabled"; }; - pcie@4,0 { + pcie4: pcie@4,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; @@ -197,7 +197,7 @@ status = "disabled"; }; - pcie@5,0 { + pcie5: pcie@5,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x80000 0 0x2000>; reg = <0x2800 0 0 0 0>; @@ -214,7 +214,7 @@ status = "disabled"; }; - pcie@6,0 { + pcie6: pcie@6,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x84000 0 0x2000>; reg = <0x3000 0 0 0 0>; @@ -231,7 +231,7 @@ status = "disabled"; }; - pcie@7,0 { + pcie7: pcie@7,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x88000 0 0x2000>; reg = <0x3800 0 0 0 0>; @@ -248,7 +248,7 @@ status = "disabled"; }; - pcie@8,0 { + pcie8: pcie@8,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>; reg = <0x4000 0 0 0 0>; @@ -265,7 +265,7 @@ status = "disabled"; }; - pcie@9,0 { + pcie9: pcie@9,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x42000 0 0x2000>; reg = <0x4800 0 0 0 0>; diff --git a/dts/src/arm/armada-xp-mv78460.dtsi b/dts/src/arm/armada-xp-mv78460.dtsi index 0e24f1a385..775bee53ce 100644 --- a/dts/src/arm/armada-xp-mv78460.dtsi +++ b/dts/src/arm/armada-xp-mv78460.dtsi @@ -104,7 +104,7 @@ * configured as x4 or quad x1 lanes. Two units are * x4/x1. */ - pcie-controller { + pciec: pcie-controller@82000000 { compatible = "marvell,armada-xp-pcie"; status = "disabled"; device_type = "pci"; @@ -150,7 +150,7 @@ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; - pcie@1,0 { + pcie1: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -167,7 +167,7 @@ status = "disabled"; }; - pcie@2,0 { + pcie2: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; reg = <0x1000 0 0 0 0>; @@ -184,7 +184,7 @@ status = "disabled"; }; - pcie@3,0 { + pcie3: pcie@3,0 { device_type = "pci"; assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; reg = <0x1800 0 0 0 0>; @@ -201,7 +201,7 @@ status = "disabled"; }; - pcie@4,0 { + pcie4: pcie@4,0 { device_type = "pci"; assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; reg = <0x2000 0 0 0 0>; @@ -218,7 +218,7 @@ status = "disabled"; }; - pcie@5,0 { + pcie5: pcie@5,0 { device_type = "pci"; assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; reg = <0x2800 0 0 0 0>; @@ -235,7 +235,7 @@ status = "disabled"; }; - pcie@6,0 { + pcie6: pcie@6,0 { device_type = "pci"; assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; reg = <0x3000 0 0 0 0>; @@ -252,7 +252,7 @@ status = "disabled"; }; - pcie@7,0 { + pcie7: pcie@7,0 { device_type = "pci"; assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; reg = <0x3800 0 0 0 0>; @@ -269,7 +269,7 @@ status = "disabled"; }; - pcie@8,0 { + pcie8: pcie@8,0 { device_type = "pci"; assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; reg = <0x4000 0 0 0 0>; @@ -286,7 +286,7 @@ status = "disabled"; }; - pcie@9,0 { + pcie9: pcie@9,0 { device_type = "pci"; assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; reg = <0x4800 0 0 0 0>; @@ -303,7 +303,7 @@ status = "disabled"; }; - pcie@10,0 { + pcie10: pcie@10,0 { device_type = "pci"; assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; reg = <0x5000 0 0 0 0>; diff --git a/dts/src/arm/armada-xp-netgear-rn2120.dts b/dts/src/arm/armada-xp-netgear-rn2120.dts index d19f44c709..a2f0e78946 100644 --- a/dts/src/arm/armada-xp-netgear-rn2120.dts +++ b/dts/src/arm/armada-xp-netgear-rn2120.dts @@ -56,7 +56,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0 0x00000000 0 0x80000000>; /* 2GB */ }; @@ -67,28 +67,6 @@ MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; - pcie-controller { - status = "okay"; - - /* Connected to first Marvell 88SE9170 SATA controller */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* Connected to second Marvell 88SE9170 SATA controller */ - pcie@2,0 { - /* Port 0, Lane 1 */ - status = "okay"; - }; - - /* Connected to Fresco Logic FL1009 USB 3.0 controller */ - pcie@5,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { /* RTC is provided by Intersil ISL12057 I2C RTC chip */ @@ -97,7 +75,6 @@ }; i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; clock-frequency = <400000>; status = "okay"; @@ -154,23 +131,19 @@ status = "okay"; }; - mdio { - phy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - }; - - phy1: ethernet-phy@1 { /* Marvell 88E1318 */ - reg = <1>; - }; - }; - ethernet@70000 { + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; phy = <&phy0>; phy-mode = "rgmii-id"; }; ethernet@74000 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; phy = <&phy1>; phy-mode = "rgmii-id"; @@ -295,6 +268,39 @@ }; }; +&pciec { + status = "okay"; + + /* Connected to first Marvell 88SE9170 SATA controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected to second Marvell 88SE9170 SATA controller */ + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + + /* Connected to Fresco Logic FL1009 USB 3.0 controller */ + pcie@5,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1318 */ + reg = <1>; + }; +}; + + &pinctrl { poweroff: poweroff { marvell,pins = "mpp42"; diff --git a/dts/src/arm/armada-xp-openblocks-ax3-4.dts b/dts/src/arm/armada-xp-openblocks-ax3-4.dts index ed3b889d16..b577c9fb03 100644 --- a/dts/src/arm/armada-xp-openblocks-ax3-4.dts +++ b/dts/src/arm/armada-xp-openblocks-ax3-4.dts @@ -57,7 +57,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */ }; @@ -98,15 +98,6 @@ }; }; - pcie-controller { - status = "okay"; - /* Internal mini-PCIe connector */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { rtc@10300 { /* No crystal connected to the internal RTC */ @@ -148,31 +139,13 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + init { label = "Init Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; }; }; - mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - - phy2: ethernet-phy@2 { - reg = <2>; - }; - - phy3: ethernet-phy@3 { - reg = <3>; - }; - }; - ethernet@70000 { status = "okay"; phy = <&phy0>; @@ -240,6 +213,33 @@ }; }; +&pciec { + status = "okay"; + /* Internal mini-PCIe connector */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; +}; + +&mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + + phy2: ethernet-phy@2 { + reg = <2>; + }; + + phy3: ethernet-phy@3 { + reg = <3>; + }; +}; + &pinctrl { led_pins: led-pins-0 { marvell,pins = "mpp49", "mpp51", "mpp53"; diff --git a/dts/src/arm/armada-xp-synology-ds414.dts b/dts/src/arm/armada-xp-synology-ds414.dts index ae286736b9..e803da0314 100644 --- a/dts/src/arm/armada-xp-synology-ds414.dts +++ b/dts/src/arm/armada-xp-synology-ds414.dts @@ -70,7 +70,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0 0x00000000 0 0x40000000>; /* 1GB */ }; @@ -81,28 +81,6 @@ MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000 MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>; - pcie-controller { - status = "okay"; - - /* - * Connected to Marvell 88SX7042 SATA-II controller - * handling the four disks. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - - /* - * Connected to EtronTech EJ168A XHCI controller - * providing the two rear USB 3.0 ports. - */ - pcie@5,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; - }; - internal-regs { /* RTC is provided by Seiko S-35390A below */ @@ -150,16 +128,6 @@ status = "okay"; }; - mdio { - phy0: ethernet-phy@0 { /* Marvell 88E1512 */ - reg = <0>; - }; - - phy1: ethernet-phy@1 { /* Marvell 88E1512 */ - reg = <1>; - }; - }; - ethernet@70000 { status = "okay"; pinctrl-0 = <&ge0_rgmii_pins>; @@ -186,7 +154,7 @@ &sata3_pwr_pin &sata4_pwr_pin>; pinctrl-names = "default"; - sata1_regulator: sata1-regulator { + sata1_regulator: sata1-regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "SATA1 Power"; @@ -199,7 +167,7 @@ gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - sata2_regulator: sata2-regulator { + sata2_regulator: sata2-regulator@2 { compatible = "regulator-fixed"; reg = <2>; regulator-name = "SATA2 Power"; @@ -212,7 +180,7 @@ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; - sata3_regulator: sata3-regulator { + sata3_regulator: sata3-regulator@3 { compatible = "regulator-fixed"; reg = <3>; regulator-name = "SATA3 Power"; @@ -225,7 +193,7 @@ gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; - sata4_regulator: sata4-regulator { + sata4_regulator: sata4-regulator@4 { compatible = "regulator-fixed"; reg = <4>; regulator-name = "SATA4 Power"; @@ -240,6 +208,39 @@ }; }; +&pciec { + status = "okay"; + + /* + * Connected to Marvell 88SX7042 SATA-II controller + * handling the four disks. + */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* + * Connected to EtronTech EJ168A XHCI controller + * providing the two rear USB 3.0 ports. + */ + pcie@5,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; +}; + + +&mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1512 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1512 */ + reg = <1>; + }; +}; + &pinctrl { sata1_pwr_pin: sata1-pwr-pin { marvell,pins = "mpp42"; diff --git a/dts/src/arm/armada-xp.dtsi b/dts/src/arm/armada-xp.dtsi index 4a5f99e65b..5274e4ff5d 100644 --- a/dts/src/arm/armada-xp.dtsi +++ b/dts/src/arm/armada-xp.dtsi @@ -53,6 +53,9 @@ #include "armada-370-xp.dtsi" / { + #address-cells = <2>; + #size-cells = <2>; + model = "Marvell Armada XP family SoC"; compatible = "marvell,armadaxp", "marvell,armada-370-xp"; @@ -75,7 +78,7 @@ reg = <0x1400 0x500>; }; - L2: l2-cache { + L2: l2-cache@8000 { compatible = "marvell,aurora-system-cache"; reg = <0x08000 0x1000>; cache-id-part = <0x100>; @@ -84,16 +87,6 @@ wt-override; }; - i2c0: i2c@11000 { - compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11000 0x100>; - }; - - i2c1: i2c@11100 { - compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11100 0x100>; - }; - uart2: serial@12200 { compatible = "snps,dw-apb-uart"; pinctrl-0 = <&uart2_pins>; @@ -118,7 +111,7 @@ status = "disabled"; }; - system-controller@18200 { + systemc: system-controller@18200 { compatible = "marvell,armada-370-xp-system-controller"; reg = <0x18200 0x500>; }; @@ -136,7 +129,7 @@ #clock-cells = <1>; }; - thermal@182b0 { + thermal: thermal@182b0 { compatible = "marvell,armadaxp-thermal"; reg = <0x182b0 0x4 0x184d0 0x4>; @@ -150,27 +143,6 @@ clocks = <&coreclk 1>; }; - interrupt-controller@20a00 { - reg = <0x20a00 0x2d0>, <0x21070 0x58>; - }; - - timer@20300 { - compatible = "marvell,armada-xp-timer"; - clocks = <&coreclk 2>, <&refclk>; - clock-names = "nbclk", "fixed"; - }; - - watchdog@20300 { - compatible = "marvell,armada-xp-wdt"; - clocks = <&coreclk 2>, <&refclk>; - clock-names = "nbclk", "fixed"; - }; - - cpurst@20800 { - compatible = "marvell,armada-370-cpu-reset"; - reg = <0x20800 0x20>; - }; - cpu-config@21000 { compatible = "marvell,armada-xp-cpu-config"; reg = <0x21000 0x8>; @@ -184,15 +156,7 @@ status = "disabled"; }; - usb@50000 { - clocks = <&gateclk 18>; - }; - - usb@51000 { - clocks = <&gateclk 19>; - }; - - usb@52000 { + usb2: usb@52000 { compatible = "marvell,orion-ehci"; reg = <0x52000 0x500>; interrupts = <47>; @@ -200,7 +164,7 @@ status = "disabled"; }; - xor@60900 { + xor1: xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 0x60b00 0x100>; @@ -228,7 +192,7 @@ compatible = "marvell,armada-xp-neta"; }; - crypto@90000 { + cesa: crypto@90000 { compatible = "marvell,armada-xp-crypto"; reg = <0x90000 0x10000>; reg-names = "regs"; @@ -248,7 +212,7 @@ status = "disabled"; }; - xor@f0900 { + xor0: xor@f0900 { compatible = "marvell,orion-xor"; reg = <0xF0900 0x100 0xF0B00 0x100>; @@ -309,6 +273,44 @@ }; }; +&i2c0 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11000 0x100>; +}; + +&i2c1 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11100 0x100>; +}; + +&mpic { + reg = <0x20a00 0x2d0>, <0x21070 0x58>; +}; + +&timer { + compatible = "marvell,armada-xp-timer"; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; +}; + +&watchdog { + compatible = "marvell,armada-xp-wdt"; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; +}; + +&cpurst { + reg = <0x20800 0x20>; +}; + +&usb0 { + clocks = <&gateclk 18>; +}; + +&usb1 { + clocks = <&gateclk 19>; +}; + &pinctrl { ge0_gmii_pins: ge0-gmii-pins { marvell,pins = diff --git a/dts/src/arm/artpec6-devboard.dts b/dts/src/arm/artpec6-devboard.dts index f823ed382a..9dfe845694 100644 --- a/dts/src/arm/artpec6-devboard.dts +++ b/dts/src/arm/artpec6-devboard.dts @@ -46,6 +46,10 @@ status = "okay"; }; +&pcie { + status = "okay"; +}; + ðernet { status = "okay"; diff --git a/dts/src/arm/artpec6.dtsi b/dts/src/arm/artpec6.dtsi index 3489019cc0..767cbe8d85 100644 --- a/dts/src/arm/artpec6.dtsi +++ b/dts/src/arm/artpec6.dtsi @@ -67,7 +67,7 @@ }; }; - syscon { + syscon: syscon@f8000000 { compatible = "axis,artpec6-syscon", "syscon"; reg = <0xf8000000 0x48>; }; @@ -154,6 +154,33 @@ interrupt-parent = <&intc>; }; + pcie: pcie@f8050000 { + compatible = "axis,artpec6-pcie", "snps,dw-pcie"; + reg = <0xf8050000 0x2000 + 0xf8040000 0x1000 + 0xc0000000 0x2000>; + reg-names = "dbi", "phy", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + /* downstream I/O */ + ranges = <0x81000000 0 0 0xc0002000 0 0x00010000 + /* non-prefetchable memory */ + 0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>; + num-lanes = <2>; + bus-range = <0x00 0xff>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + axis,syscon-pcie = <&syscon>; + status = "disabled"; + }; + amba@0 { compatible = "simple-bus"; #address-cells = <0x1>; diff --git a/dts/src/arm/at91-sama5d4_ma5d4.dtsi b/dts/src/arm/at91-sama5d4_ma5d4.dtsi index a92c6e0ca8..b5a5a91bc2 100644 --- a/dts/src/arm/at91-sama5d4_ma5d4.dtsi +++ b/dts/src/arm/at91-sama5d4_ma5d4.dtsi @@ -12,8 +12,8 @@ #include "sama5d4.dtsi" / { - model = "DENX MA5D4"; - compatible = "denx,ma5d4", "atmel,sama5d4", "atmel,sama5"; + model = "Aries/DENX MA5D4"; + compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5"; memory { reg = <0x20000000 0x10000000>; diff --git a/dts/src/arm/at91-sama5d4_ma5d4evk.dts b/dts/src/arm/at91-sama5d4_ma5d4evk.dts index eac4ea2744..84be29f38d 100644 --- a/dts/src/arm/at91-sama5d4_ma5d4evk.dts +++ b/dts/src/arm/at91-sama5d4_ma5d4evk.dts @@ -13,8 +13,8 @@ #include "at91-sama5d4_ma5d4.dtsi" / { - model = "DENX MA5D4EVK"; - compatible = "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5"; + model = "Aries/DENX MA5D4EVK"; + compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5"; chosen { stdout-path = "serial3:115200n8"; diff --git a/dts/src/arm/at91rm9200.dtsi b/dts/src/arm/at91rm9200.dtsi index 4e913c2ccb..f057e0b15a 100644 --- a/dts/src/arm/at91rm9200.dtsi +++ b/dts/src/arm/at91rm9200.dtsi @@ -481,8 +481,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA30 periph A */ - AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA31 periph with pullup */ + <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/dts/src/arm/at91sam9260.dtsi b/dts/src/arm/at91sam9260.dtsi index a3e363d791..9e035b21e1 100644 --- a/dts/src/arm/at91sam9260.dtsi +++ b/dts/src/arm/at91sam9260.dtsi @@ -412,8 +412,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A */ - AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB15 periph with pullup */ + <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/dts/src/arm/at91sam9260ek.dts b/dts/src/arm/at91sam9260ek.dts index 2c87f58448..b2578feceb 100644 --- a/dts/src/arm/at91sam9260ek.dts +++ b/dts/src/arm/at91sam9260ek.dts @@ -174,14 +174,14 @@ label = "Button 3"; gpios = <&pioA 30 GPIO_ACTIVE_LOW>; linux,code = <0x103>; - gpio-key,wakeup; + wakeup-source; }; btn4 { label = "Button 4"; gpios = <&pioA 31 GPIO_ACTIVE_LOW>; linux,code = <0x104>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/dts/src/arm/at91sam9261.dtsi b/dts/src/arm/at91sam9261.dtsi index 32752d7883..3fe77c38bd 100644 --- a/dts/src/arm/at91sam9261.dtsi +++ b/dts/src/arm/at91sam9261.dtsi @@ -302,8 +302,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>, - <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/dts/src/arm/at91sam9263.dtsi b/dts/src/arm/at91sam9263.dtsi index aeb1a36373..a1888f6d89 100644 --- a/dts/src/arm/at91sam9263.dtsi +++ b/dts/src/arm/at91sam9263.dtsi @@ -412,8 +412,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC30 periph A */ - AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PC31 periph with pullup */ + <AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/dts/src/arm/at91sam9g45.dtsi b/dts/src/arm/at91sam9g45.dtsi index b3501ae2a3..e567d5fd3f 100644 --- a/dts/src/arm/at91sam9g45.dtsi +++ b/dts/src/arm/at91sam9g45.dtsi @@ -478,8 +478,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A */ - AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB13 periph A */ + <AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/dts/src/arm/at91sam9n12.dtsi b/dts/src/arm/at91sam9n12.dtsi index 3b3eb3edcb..f43d769535 100644 --- a/dts/src/arm/at91sam9n12.dtsi +++ b/dts/src/arm/at91sam9n12.dtsi @@ -500,8 +500,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ - AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/dts/src/arm/at91sam9rl.dtsi b/dts/src/arm/at91sam9rl.dtsi index 70adf940d9..f4c129a98f 100644 --- a/dts/src/arm/at91sam9rl.dtsi +++ b/dts/src/arm/at91sam9rl.dtsi @@ -438,8 +438,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>, - <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>, + <AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/dts/src/arm/at91sam9x5.dtsi b/dts/src/arm/at91sam9x5.dtsi index ed4e4bd8a8..f66bae9257 100644 --- a/dts/src/arm/at91sam9x5.dtsi +++ b/dts/src/arm/at91sam9x5.dtsi @@ -460,8 +460,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA9 periph A */ - AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PA10 periph A with pullup */ + <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/dts/src/arm/bcm-cygnus.dtsi b/dts/src/arm/bcm-cygnus.dtsi index fabc9f36c4..8833a4c3cd 100644 --- a/dts/src/arm/bcm-cygnus.dtsi +++ b/dts/src/arm/bcm-cygnus.dtsi @@ -91,6 +91,13 @@ #address-cells = <1>; #size-cells = <1>; + otp: otp@0301c800 { + compatible = "brcm,ocotp"; + reg = <0x0301c800 0x2c>; + brcm,ocotp-size = <2048>; + status = "disabled"; + }; + pcie_phy: phy@0301d0a0 { compatible = "brcm,cygnus-pcie-phy"; reg = <0x0301d0a0 0x14>; @@ -108,12 +115,21 @@ }; }; - pinctrl: pinctrl@0x0301d0c8 { + pinctrl: pinctrl@0301d0c8 { compatible = "brcm,cygnus-pinmux"; reg = <0x0301d0c8 0x30>, <0x0301d24c 0x2c>; }; + mailbox: mailbox@03024024 { + compatible = "brcm,iproc-mailbox"; + reg = <0x03024024 0x40>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-controller; + #mbox-cells = <1>; + }; + gpio_crmu: gpio@03024800 { compatible = "brcm,cygnus-crmu-gpio"; reg = <0x03024800 0x50>, @@ -121,6 +137,9 @@ ngpios = <6>; #gpio-cells = <2>; gpio-controller; + interrupt-controller; + interrupt-parent = <&mailbox>; + interrupts = <0>; }; i2c0: i2c@18008000 { diff --git a/dts/src/arm/bcm-nsp.dtsi b/dts/src/arm/bcm-nsp.dtsi index 7c9e0fae9b..b6142bda66 100644 --- a/dts/src/arm/bcm-nsp.dtsi +++ b/dts/src/arm/bcm-nsp.dtsi @@ -160,7 +160,7 @@ axi { compatible = "simple-bus"; - ranges = <0x00000000 0x18000000 0x0011ba08>; + ranges = <0x00000000 0x18000000 0x0011c40a>; #address-cells = <1>; #size-cells = <1>; @@ -241,6 +241,16 @@ brcm,nand-has-wp; }; + gpiob: gpio@30000 { + compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio"; + reg = <0x30000 0x50>; + #gpio-cells = <2>; + gpio-controller; + ngpios = <4>; + interrupt-controller; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + }; + pwm: pwm@31000 { compatible = "brcm,iproc-pwm"; reg = <0x31000 0x28>; @@ -254,6 +264,35 @@ reg = <0x33000 0x14>; }; + qspi: qspi@27200 { + compatible = "brcm,spi-bcm-qspi", "brcm,spi-nsp-qspi"; + reg = <0x027200 0x184>, + <0x027000 0x124>, + <0x11c408 0x004>, + <0x0273a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", + "intr_status_reg"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "spi_lr_fullness_reached", + "spi_lr_session_aborted", + "spi_lr_impatient", + "spi_lr_session_done", + "spi_lr_overhead", + "mspi_done", + "mspi_halted"; + clocks = <&iprocmed>; + clock-names = "iprocmed"; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + ccbtimer0: timer@34000 { compatible = "arm,sp804"; reg = <0x34000 0x1000>; diff --git a/dts/src/arm/bcm2835-rpi-a-plus.dts b/dts/src/arm/bcm2835-rpi-a-plus.dts index f7f9db355d..d0704540db 100644 --- a/dts/src/arm/bcm2835-rpi-a-plus.dts +++ b/dts/src/arm/bcm2835-rpi-a-plus.dts @@ -22,7 +22,72 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; + /* + * This is based on the unreleased schematic for the Model A+. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "SDA0", + "SCL0", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "SDA0", + "SCL0", + "NC", /* GPIO30 */ + "NC", /* GPIO31 */ + "CAM_GPIO1", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "PWR_LOW_N", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "USB_LIMIT", /* GPIO38 */ + "NC", /* GPIO39 */ + "PWM0_OUT", /* GPIO40 */ + "CAM_GPIO0", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "NC", /* GPIO44 */ + "PWM1_OUT", /* GPIO45 */ + "HDMI_HPD_N", + "STATUS_LED", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ i2s_alt0: i2s_alt0 { diff --git a/dts/src/arm/bcm2835-rpi-a.dts b/dts/src/arm/bcm2835-rpi-a.dts index 8be102f5d8..46d078e290 100644 --- a/dts/src/arm/bcm2835-rpi-a.dts +++ b/dts/src/arm/bcm2835-rpi-a.dts @@ -15,7 +15,74 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>; + /* + * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf + * RPI00021 sheet 02 + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "SDA0", + "SCL0", + "SDA1", + "SCL1", + "GPIO_GCLK", + "CAM_GPIO1", + "LAN_RUN", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "NC", /* GPIO12 */ + "NC", /* GPIO13 */ + /* Serial port */ + "TXD0", + "RXD0", + "STATUS_LED_N", + "GPIO17", + "GPIO18", + "NC", /* GPIO19 */ + "NC", /* GPIO20 */ + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "NC", /* GPIO26 */ + "CAM_GPIO0", + /* Binary number representing build/revision */ + "CONFIG0", + "CONFIG1", + "CONFIG2", + "CONFIG3", + "NC", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "NC", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "PWM0_OUT", + "NC", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "NC", /* GPIO44 */ + "PWM1_OUT", + "HDMI_HPD_P", + "SD_CARD_DET", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0 &i2s_alt2>; /* I2S interface */ i2s_alt2: i2s_alt2 { diff --git a/dts/src/arm/bcm2835-rpi-b-plus.dts b/dts/src/arm/bcm2835-rpi-b-plus.dts index 35cde65c97..432088ebb0 100644 --- a/dts/src/arm/bcm2835-rpi-b-plus.dts +++ b/dts/src/arm/bcm2835-rpi-b-plus.dts @@ -23,7 +23,73 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; + /* + * Taken from Raspberry-Pi-B-Plus-V1.2-Schematics.pdf + * RPI-BPLUS sheet 1 + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "SDA0", + "SCL0", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "SDA0", + "SCL0", + "NC", /* GPIO30 */ + "LAN_RUN", /* GPIO31 */ + "CAM_GPIO1", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "PWR_LOW_N", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "USB_LIMIT", /* GPIO38 */ + "NC", /* GPIO39 */ + "PWM0_OUT", /* GPIO40 */ + "CAM_GPIO0", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "ETHCLK", /* GPIO44 */ + "PWM1_OUT", /* GPIO45 */ + "HDMI_HPD_N", + "STATUS_LED", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ i2s_alt0: i2s_alt0 { diff --git a/dts/src/arm/bcm2835-rpi-b-rev2.dts b/dts/src/arm/bcm2835-rpi-b-rev2.dts index 84df85ea62..4133bc2cd9 100644 --- a/dts/src/arm/bcm2835-rpi-b-rev2.dts +++ b/dts/src/arm/bcm2835-rpi-b-rev2.dts @@ -16,7 +16,73 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>; + /* + * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf + * RPI00022 sheet 02 + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "SDA0", + "SCL0", + "SDA1", + "SCL1", + "GPIO_GCLK", + "CAM_CLK", + "LAN_RUN", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "NC", /* GPIO12 */ + "NC", /* GPIO13 */ + /* Serial port */ + "TXD0", + "RXD0", + "STATUS_LED_N", + "GPIO17", + "GPIO18", + "NC", /* GPIO19 */ + "NC", /* GPIO20 */ + "CAM_GPIO", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "NC", /* GPIO26 */ + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", + "NC", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "NC", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "PWM0_OUT", + "NC", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "NC", /* GPIO44 */ + "PWM1_OUT", + "HDMI_HPD_P", + "SD_CARD_DET", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0 &i2s_alt2>; /* I2S interface */ i2s_alt2: i2s_alt2 { diff --git a/dts/src/arm/bcm2835-rpi-b.dts b/dts/src/arm/bcm2835-rpi-b.dts index 8e626a80fe..4d56fe3006 100644 --- a/dts/src/arm/bcm2835-rpi-b.dts +++ b/dts/src/arm/bcm2835-rpi-b.dts @@ -16,7 +16,74 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &alt3>; + /* + * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf + * RPI00021 sheet 02 + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "SDA0", + "SCL0", + "SDA1", + "SCL1", + "GPIO_GCLK", + "CAM_GPIO1", + "LAN_RUN", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "NC", /* GPIO12 */ + "NC", /* GPIO13 */ + /* Serial port */ + "TXD0", + "RXD0", + "STATUS_LED_N", + "GPIO17", + "GPIO18", + "NC", /* GPIO19 */ + "NC", /* GPIO20 */ + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "NC", /* GPIO26 */ + "CAM_GPIO0", + /* Binary number representing build/revision */ + "CONFIG0", + "CONFIG1", + "CONFIG2", + "CONFIG3", + "NC", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "NC", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "PWM0_OUT", + "NC", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "NC", /* GPIO44 */ + "PWM1_OUT", + "HDMI_HPD_P", + "SD_CARD_DET", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0>; }; &hdmi { diff --git a/dts/src/arm/bcm2835-rpi-zero.dts b/dts/src/arm/bcm2835-rpi-zero.dts index 60e359fafc..cc8b832c4c 100644 --- a/dts/src/arm/bcm2835-rpi-zero.dts +++ b/dts/src/arm/bcm2835-rpi-zero.dts @@ -26,7 +26,72 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; + /* + * This is based on the official GPU firmware DT blob. + * + * Legend: + * "NC" = not connected (no rail from the SoC) + * "FOO" = GPIO line named "FOO" on the schematic + * "FOO_N" = GPIO line named "FOO" on schematic, active low + */ + gpio-line-names = "SDA0", + "SCL0", + "SDA1", + "SCL1", + "GPIO_GCLK", + "GPIO5", + "GPIO6", + "SPI_CE1_N", + "SPI_CE0_N", + "SPI_MISO", + "SPI_MOSI", + "SPI_SCLK", + "GPIO12", + "GPIO13", + /* Serial port */ + "TXD0", + "RXD0", + "GPIO16", + "GPIO17", + "GPIO18", + "GPIO19", + "GPIO20", + "GPIO21", + "GPIO22", + "GPIO23", + "GPIO24", + "GPIO25", + "GPIO26", + "GPIO27", + "SDA0", + "SCL0", + "NC", /* GPIO30 */ + "NC", /* GPIO31 */ + "CAM_GPIO1", /* GPIO32 */ + "NC", /* GPIO33 */ + "NC", /* GPIO34 */ + "NC", /* GPIO35 */ + "NC", /* GPIO36 */ + "NC", /* GPIO37 */ + "NC", /* GPIO38 */ + "NC", /* GPIO39 */ + "NC", /* GPIO40 */ + "CAM_GPIO0", /* GPIO41 */ + "NC", /* GPIO42 */ + "NC", /* GPIO43 */ + "NC", /* GPIO44 */ + "NC", /* GPIO45 */ + "HDMI_HPD_N", + "STATUS_LED_N", + /* Used by SD Card */ + "SD_CLK_R", + "SD_CMD_R", + "SD_DATA0_R", + "SD_DATA1_R", + "SD_DATA2_R", + "SD_DATA3_R"; + + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ i2s_alt0: i2s_alt0 { diff --git a/dts/src/arm/bcm2835-rpi.dtsi b/dts/src/arm/bcm2835-rpi.dtsi index e9b47b2bbc..6ddf7dfe3f 100644 --- a/dts/src/arm/bcm2835-rpi.dtsi +++ b/dts/src/arm/bcm2835-rpi.dtsi @@ -39,22 +39,21 @@ }; alt0: alt0 { - brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>; + brcm,pins = <4 5 7 8 9 10 11 14 15>; brcm,function = <BCM2835_FSEL_ALT0>; }; - - alt3: alt3 { - brcm,pins = <48 49 50 51 52 53>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; }; &i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_gpio0>; status = "okay"; clock-frequency = <100000>; }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_gpio2>; status = "okay"; clock-frequency = <100000>; }; @@ -64,11 +63,15 @@ }; &sdhci { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio48>; status = "okay"; bus-width = <4>; }; &pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; status = "okay"; }; diff --git a/dts/src/arm/bcm2835.dtsi b/dts/src/arm/bcm2835.dtsi index a78759e737..0890d97e67 100644 --- a/dts/src/arm/bcm2835.dtsi +++ b/dts/src/arm/bcm2835.dtsi @@ -23,3 +23,9 @@ }; }; }; + +/* enable thermal sensor with the correct compatible property set */ +&thermal { + compatible = "brcm,bcm2835-thermal"; + status = "okay"; +}; diff --git a/dts/src/arm/bcm2836-rpi-2-b.dts b/dts/src/arm/bcm2836-rpi-2-b.dts index 39dccf62ac..bf19e8cfb9 100644 --- a/dts/src/arm/bcm2836-rpi-2-b.dts +++ b/dts/src/arm/bcm2836-rpi-2-b.dts @@ -27,7 +27,7 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; + pinctrl-0 = <&gpioout &alt0 &i2s_alt0>; /* I2S interface */ i2s_alt0: i2s_alt0 { diff --git a/dts/src/arm/bcm2836.dtsi b/dts/src/arm/bcm2836.dtsi index 9d0651d8f3..519a44f5d2 100644 --- a/dts/src/arm/bcm2836.dtsi +++ b/dts/src/arm/bcm2836.dtsi @@ -76,3 +76,9 @@ interrupt-parent = <&local_intc>; interrupts = <8>; }; + +/* enable thermal sensor with the correct compatible property set */ +&thermal { + compatible = "brcm,bcm2836-thermal"; + status = "okay"; +}; diff --git a/dts/src/arm/bcm283x.dtsi b/dts/src/arm/bcm283x.dtsi index 46d46d894a..9a44da1908 100644 --- a/dts/src/arm/bcm283x.dtsi +++ b/dts/src/arm/bcm283x.dtsi @@ -104,7 +104,7 @@ reg = <0x7e104000 0x10>; }; - mailbox: mailbox@7e00b800 { + mailbox: mailbox@7e00b880 { compatible = "brcm,bcm2835-mbox"; reg = <0x7e00b880 0x40>; interrupts = <0 1>; @@ -132,6 +132,209 @@ interrupt-controller; #interrupt-cells = <2>; + + /* Defines pin muxing groups according to + * BCM2835-ARM-Peripherals.pdf page 102. + * + * While each pin can have its mux selected + * for various functions individually, some + * groups only make sense to switch to a + * particular function together. + */ + dpi_gpio0: dpi_gpio0 { + brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 + 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + emmc_gpio22: emmc_gpio22 { + brcm,pins = <22 23 24 25 26 27>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + emmc_gpio34: emmc_gpio34 { + brcm,pins = <34 35 36 37 38 39>; + brcm,function = <BCM2835_FSEL_ALT3>; + brcm,pull = <BCM2835_PUD_OFF + BCM2835_PUD_UP + BCM2835_PUD_UP + BCM2835_PUD_UP + BCM2835_PUD_UP + BCM2835_PUD_UP>; + }; + emmc_gpio48: emmc_gpio48 { + brcm,pins = <48 49 50 51 52 53>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + + gpclk0_gpio4: gpclk0_gpio4 { + brcm,pins = <4>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk1_gpio5: gpclk1_gpio5 { + brcm,pins = <5>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk1_gpio42: gpclk1_gpio42 { + brcm,pins = <42>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk1_gpio44: gpclk1_gpio44 { + brcm,pins = <44>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk2_gpio6: gpclk2_gpio6 { + brcm,pins = <6>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk2_gpio43: gpclk2_gpio43 { + brcm,pins = <43>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + + i2c0_gpio0: i2c0_gpio0 { + brcm,pins = <0 1>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + i2c0_gpio32: i2c0_gpio32 { + brcm,pins = <32 34>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + i2c0_gpio44: i2c0_gpio44 { + brcm,pins = <44 45>; + brcm,function = <BCM2835_FSEL_ALT1>; + }; + i2c1_gpio2: i2c1_gpio2 { + brcm,pins = <2 3>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + i2c1_gpio44: i2c1_gpio44 { + brcm,pins = <44 45>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + i2c_slave_gpio18: i2c_slave_gpio18 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + + jtag_gpio4: jtag_gpio4 { + brcm,pins = <4 5 6 12 13>; + brcm,function = <BCM2835_FSEL_ALT4>; + }; + jtag_gpio22: jtag_gpio22 { + brcm,pins = <22 23 24 25 26 27>; + brcm,function = <BCM2835_FSEL_ALT4>; + }; + + pcm_gpio18: pcm_gpio18 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pcm_gpio28: pcm_gpio28 { + brcm,pins = <28 29 30 31>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + + pwm0_gpio12: pwm0_gpio12 { + brcm,pins = <12>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm0_gpio18: pwm0_gpio18 { + brcm,pins = <18>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + pwm0_gpio40: pwm0_gpio40 { + brcm,pins = <40>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio13: pwm1_gpio13 { + brcm,pins = <13>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio19: pwm1_gpio19 { + brcm,pins = <19>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + pwm1_gpio41: pwm1_gpio41 { + brcm,pins = <41>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio45: pwm1_gpio45 { + brcm,pins = <45>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + + sdhost_gpio48: sdhost_gpio48 { + brcm,pins = <48 49 50 51 52 53>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + + spi0_gpio7: spi0_gpio7 { + brcm,pins = <7 8 9 10 11>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + spi0_gpio35: spi0_gpio35 { + brcm,pins = <35 36 37 38 39>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + spi1_gpio16: spi1_gpio16 { + brcm,pins = <16 17 18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT4>; + }; + spi2_gpio40: spi2_gpio40 { + brcm,pins = <40 41 42 43 44 45>; + brcm,function = <BCM2835_FSEL_ALT4>; + }; + + uart0_gpio14: uart0_gpio14 { + brcm,pins = <14 15>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + /* Separate from the uart0_gpio14 group + * because it conflicts with spi1_gpio16, and + * people often run uart0 on the two pins + * without flow contrl. + */ + uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 { + brcm,pins = <16 17>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + uart0_gpio30: uart0_gpio30 { + brcm,pins = <30 31>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + uart0_ctsrts_gpio32: uart0_ctsrts_gpio32 { + brcm,pins = <32 33>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + + uart1_gpio14: uart1_gpio14 { + brcm,pins = <14 15>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 { + brcm,pins = <16 17>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_gpio32: uart1_gpio32 { + brcm,pins = <32 33>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 { + brcm,pins = <30 31>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_gpio36: uart1_gpio36 { + brcm,pins = <36 37 38 39>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + uart1_gpio40: uart1_gpio40 { + brcm,pins = <40 41>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 { + brcm,pins = <42 43>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; }; uart0: serial@7e201000 { @@ -187,6 +390,13 @@ interrupts = <2 14>; /* pwa1 */ }; + thermal: thermal@7e212000 { + compatible = "brcm,bcm2835-thermal"; + reg = <0x7e212000 0x8>; + clocks = <&clocks BCM2835_CLOCK_TSENS>; + status = "disabled"; + }; + aux: aux@0x7e215000 { compatible = "brcm,bcm2835-aux"; #clock-cells = <1>; diff --git a/dts/src/arm/bcm4708-luxul-xap-1510.dts b/dts/src/arm/bcm4708-luxul-xap-1510.dts new file mode 100644 index 0000000000..35e6ed6a3e --- /dev/null +++ b/dts/src/arm/bcm4708-luxul-xap-1510.dts @@ -0,0 +1,64 @@ +/* + * Copyright 2016 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + compatible = "luxul,xap-1510v1", "brcm,bcm4708"; + model = "Luxul XAP-1510 V1"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/dts/src/arm/bcm4709-asus-rt-ac87u.dts b/dts/src/arm/bcm4709-asus-rt-ac87u.dts index 8ade7def2e..eac0f52e5e 100644 --- a/dts/src/arm/bcm4709-asus-rt-ac87u.dts +++ b/dts/src/arm/bcm4709-asus-rt-ac87u.dts @@ -9,7 +9,7 @@ /dts-v1/; -#include "bcm4708.dtsi" +#include "bcm4709.dtsi" #include "bcm5301x-nand-cs0-bch8.dtsi" / { diff --git a/dts/src/arm/bcm4709-buffalo-wxr-1900dhp.dts b/dts/src/arm/bcm4709-buffalo-wxr-1900dhp.dts index 0653e7ef24..aab39c9864 100644 --- a/dts/src/arm/bcm4709-buffalo-wxr-1900dhp.dts +++ b/dts/src/arm/bcm4709-buffalo-wxr-1900dhp.dts @@ -9,7 +9,7 @@ /dts-v1/; -#include "bcm4708.dtsi" +#include "bcm4709.dtsi" #include "bcm5301x-nand-cs0-bch8.dtsi" / { diff --git a/dts/src/arm/bcm4709-netgear-r7000.dts b/dts/src/arm/bcm4709-netgear-r7000.dts index a22ed14404..fd38d2aa35 100644 --- a/dts/src/arm/bcm4709-netgear-r7000.dts +++ b/dts/src/arm/bcm4709-netgear-r7000.dts @@ -9,7 +9,7 @@ /dts-v1/; -#include "bcm4708.dtsi" +#include "bcm4709.dtsi" #include "bcm5301x-nand-cs0-bch8.dtsi" / { diff --git a/dts/src/arm/bcm4709-netgear-r8000.dts b/dts/src/arm/bcm4709-netgear-r8000.dts index ca181516c2..92f8a7219e 100644 --- a/dts/src/arm/bcm4709-netgear-r8000.dts +++ b/dts/src/arm/bcm4709-netgear-r8000.dts @@ -9,7 +9,7 @@ /dts-v1/; -#include "bcm4708.dtsi" +#include "bcm4709.dtsi" #include "bcm5301x-nand-cs0-bch8.dtsi" / { @@ -107,6 +107,10 @@ }; }; +&uart0 { + status = "okay"; +}; + &usb2 { vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; diff --git a/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts b/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts new file mode 100644 index 0000000000..9a92c24ac2 --- /dev/null +++ b/dts/src/arm/bcm4709-tplink-archer-c9-v1.dts @@ -0,0 +1,114 @@ +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm4709.dtsi" + +/ { + compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708"; + model = "TP-LINK Archer C9 V1"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + lan { + label = "bcm53xx:blue:lan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wan-blue { + label = "bcm53xx:blue:wan"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb2 { + vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; +}; + +&usb3 { + vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/dts/src/arm/bcm4709.dtsi b/dts/src/arm/bcm4709.dtsi new file mode 100644 index 0000000000..f03976597a --- /dev/null +++ b/dts/src/arm/bcm4709.dtsi @@ -0,0 +1,11 @@ +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * + * Licensed under the ISC license. + */ + +#include "bcm4708.dtsi" + +&uart0 { + clock-frequency = <125000000>; +}; diff --git a/dts/src/arm/bcm47094-dlink-dir-885l.dts b/dts/src/arm/bcm47094-dlink-dir-885l.dts index c8c0b36169..661348dbb7 100644 --- a/dts/src/arm/bcm47094-dlink-dir-885l.dts +++ b/dts/src/arm/bcm47094-dlink-dir-885l.dts @@ -9,7 +9,7 @@ /dts-v1/; -#include "bcm4708.dtsi" +#include "bcm47094.dtsi" #include "bcm5301x-nand-cs0-bch1.dtsi" / { @@ -107,7 +107,6 @@ &uart0 { status = "okay"; - clock-frequency = <125000000>; }; &usb3 { diff --git a/dts/src/arm/bcm47094-luxul-xwr-3100.dts b/dts/src/arm/bcm47094-luxul-xwr-3100.dts new file mode 100644 index 0000000000..169b35fe56 --- /dev/null +++ b/dts/src/arm/bcm47094-luxul-xwr-3100.dts @@ -0,0 +1,111 @@ +/* + * Copyright 2016 Luxul Inc. + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch4.dtsi" + +/ { + compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul XWR-3100 V1"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + power { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + lan3 { + label = "bcm53xx:green:lan1"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + lan4 { + label = "bcm53xx:green:lan0"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + wan { + label = "bcm53xx:green:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + lan1 { + label = "bcm53xx:green:lan3"; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + lan2 { + label = "bcm53xx:green:lan2"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + + 2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; +}; + +&spi_nor { + status = "okay"; +}; diff --git a/dts/src/arm/bcm47094-netgear-r8500.dts b/dts/src/arm/bcm47094-netgear-r8500.dts new file mode 100644 index 0000000000..521b4155de --- /dev/null +++ b/dts/src/arm/bcm47094-netgear-r8500.dts @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm47094.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "netgear,r8500", "brcm,bcm47094", "brcm,bcm4708"; + model = "Netgear R8500"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + power0 { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + power1 { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 5ghz-1 { + label = "bcm53xx:white:5ghz-1"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 5ghz-2 { + label = "bcm53xx:white:5ghz-2"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + brightness { + label = "Backlight"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/dts/src/arm/bcm47094.dtsi b/dts/src/arm/bcm47094.dtsi new file mode 100644 index 0000000000..4f09aa0114 --- /dev/null +++ b/dts/src/arm/bcm47094.dtsi @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * + * Licensed under the ISC license. + */ + +#include "bcm4708.dtsi" + +/ { + usb3_phy: usb3-phy { + compatible = "brcm,ns-bx-usb3-phy"; + }; +}; + +&uart0 { + clock-frequency = <125000000>; +}; diff --git a/dts/src/arm/bcm47189-tenda-ac9.dts b/dts/src/arm/bcm47189-tenda-ac9.dts new file mode 100644 index 0000000000..4403ae8790 --- /dev/null +++ b/dts/src/arm/bcm47189-tenda-ac9.dts @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * + * Licensed under the ISC license. + */ + +/dts-v1/; + +#include "bcm53573.dtsi" + +/ { + compatible = "tenda,ac9", "brcm,bcm47189", "brcm,bcm53573"; + model = "Tenda AC9"; + + chosen { + bootargs = "console=ttyS0,115200 earlycon"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + system { + label = "bcm53xx:blue:system"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/dts/src/arm/bcm5301x-nand-cs0-bch4.dtsi b/dts/src/arm/bcm5301x-nand-cs0-bch4.dtsi new file mode 100644 index 0000000000..b4e875df95 --- /dev/null +++ b/dts/src/arm/bcm5301x-nand-cs0-bch4.dtsi @@ -0,0 +1,13 @@ +/* + * Copyright 2016 Luxul Inc. + * + * Licensed under the ISC license. + */ + +#include "bcm5301x-nand-cs0.dtsi" + +&nandcs { + nand-ecc-algo = "bch"; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; +}; diff --git a/dts/src/arm/bcm5301x.dtsi b/dts/src/arm/bcm5301x.dtsi index ae4b388061..f09a2bb089 100644 --- a/dts/src/arm/bcm5301x.dtsi +++ b/dts/src/arm/bcm5301x.dtsi @@ -149,6 +149,13 @@ clock-names = "phy-ref-clk"; }; + usb3_phy: usb3-phy { + compatible = "brcm,ns-ax-usb3-phy"; + reg = <0x18105000 0x1000>, <0x18003000 0x1000>; + reg-names = "dmp", "ccb-mii"; + #phy-cells = <0>; + }; + axi@18000000 { compatible = "brcm,bus-axi"; reg = <0x18000000 0x1000>; diff --git a/dts/src/arm/bcm53573.dtsi b/dts/src/arm/bcm53573.dtsi new file mode 100644 index 0000000000..e2c496a96c --- /dev/null +++ b/dts/src/arm/bcm53573.dtsi @@ -0,0 +1,159 @@ +/* + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal@milecki.pl> + * + * Licensed under the ISC license. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + chosen { + stdout-path = &uart0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + }; + + mpcore { + compatible = "simple-bus"; + ranges = <0x00000000 0x18310000 0x00008000>; + #address-cells = <1>; + #size-cells = <1>; + + gic: interrupt-controller@1000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x2000 0x0100>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + alp: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <40000000>; + }; + }; + + axi@18000000 { + compatible = "brcm,bus-axi"; + reg = <0x18000000 0x1000>; + ranges = <0x00000000 0x18000000 0x00100000>; + #address-cells = <1>; + #size-cells = <1>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0x000fffff 0xffff>; + interrupt-map = + /* ChipCommon */ + <0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + + /* IEEE 802.11 0 */ + <0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + + /* PCIe Controller 0 */ + <0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + + /* USB 2.0 Controller */ + <0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 0 */ + <0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + + /* IEEE 802.11 1 */ + <0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + + /* Ethernet Controller 1 */ + <0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + + chipcommon: chipcommon@0 { + compatible = "simple-bus"; + reg = <0x00000000 0x1000>; + ranges; + + #address-cells = <1>; + #size-cells = <1>; + + gpio-controller; + #gpio-cells = <2>; + + uart0: serial@0300 { + compatible = "ns16550a"; + reg = <0x0300 0x100>; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&alp>; + status = "okay"; + }; + }; + + usb2: usb2@4000 { + reg = <0x4000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + ehci: ehci@4000 { + compatible = "generic-ehci"; + reg = <0x4000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + }; + + ohci: ohci@d000 { + #usb-cells = <0>; + + compatible = "generic-ohci"; + reg = <0xd000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gmac0: ethernet@5000 { + reg = <0x5000 0x1000>; + }; + + gmac1: ethernet@b000 { + reg = <0xb000 0x1000>; + }; + + pmu@12000 { + compatible = "simple-mfd", "syscon"; + reg = <0x00012000 0x00001000>; + + ilp: ilp { + compatible = "brcm,bcm53573-ilp"; + clocks = <&alp>; + #clock-cells = <0>; + clock-output-names = "ilp"; + }; + }; + }; +}; diff --git a/dts/src/arm/bcm958625k.dts b/dts/src/arm/bcm958625k.dts index 05c5f98c87..59d96fb915 100644 --- a/dts/src/arm/bcm958625k.dts +++ b/dts/src/arm/bcm958625k.dts @@ -139,3 +139,37 @@ groups = "nand_grp"; }; }; + +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; diff --git a/dts/src/arm/berlin2q-marvell-dmp.dts b/dts/src/arm/berlin2q-marvell-dmp.dts index f485308840..57aa5f8a7c 100644 --- a/dts/src/arm/berlin2q-marvell-dmp.dts +++ b/dts/src/arm/berlin2q-marvell-dmp.dts @@ -48,7 +48,7 @@ reg = <0x00000000 0x80000000>; }; - choosen { + chosen { bootargs = "earlyprintk"; stdout-path = "serial0:115200n8"; }; @@ -58,7 +58,7 @@ #address-cells = <1>; #size-cells = <0>; - reg_usb0_vbus: regulator@0 { + reg_usb0_vbus: regulator_usb0 { compatible = "regulator-fixed"; regulator-name = "usb0_vbus"; regulator-min-microvolt = <5000000>; @@ -67,7 +67,7 @@ enable-active-high; }; - reg_usb1_vbus: regulator@1 { + reg_usb1_vbus: regulator_usb1 { compatible = "regulator-fixed"; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>; @@ -76,7 +76,7 @@ enable-active-high; }; - reg_usb2_vbus: regulator@2 { + reg_usb2_vbus: regulator_usb2 { compatible = "regulator-fixed"; regulator-name = "usb2_vbus"; regulator-min-microvolt = <5000000>; @@ -85,7 +85,7 @@ enable-active-high; }; - reg_sdio1_vmmc: regulator@3 { + reg_sdio1_vmmc: regulator_sdio1_vmmc { compatible = "regulator-fixed"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -95,7 +95,7 @@ gpio = <&portb 21 GPIO_ACTIVE_HIGH>; }; - reg_sdio1_vqmmc: regulator@4 { + reg_sdio1_vqmmc: regulator_sido1_vqmmc { compatible = "regulator-gpio"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; diff --git a/dts/src/arm/cloudengines-pogoplug-series-3.dts b/dts/src/arm/cloudengines-pogoplug-series-3.dts new file mode 100644 index 0000000000..bfde32e371 --- /dev/null +++ b/dts/src/arm/cloudengines-pogoplug-series-3.dts @@ -0,0 +1,94 @@ +/* + * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3 + * + * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +#include "ox820.dtsi" + +/ { + model = "Cloud Engines PogoPlug Series 3"; + + compatible = "cloudengines,pogoplugv3", "oxsemi,ox820"; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + memory { + /* 128Mbytes DDR */ + reg = <0x60000000 0x8000000>; + }; + + aliases { + serial0 = &uart0; + gpio0 = &gpio0; + gpio1 = &gpio1; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "pogoplug:blue"; + gpios = <&gpio0 2 0>; + default-state = "keep"; + }; + + orange { + label = "pogoplug:orange"; + gpios = <&gpio1 16 1>; + default-state = "keep"; + }; + + green { + label = "pogoplug:green"; + gpios = <&gpio1 17 1>; + default-state = "keep"; + }; + }; +}; + +&uart0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; +}; + +&nandc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "hamming"; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00e00000>; + read-only; + }; + + partition@e00000 { + label = "ubi"; + reg = <0x00e00000 0x07200000>; + }; + }; +}; + +ða { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etha_mdio>; +}; diff --git a/dts/src/arm/da850-lcdk.dts b/dts/src/arm/da850-lcdk.dts index 7b8ab21fed..afcb4821de 100644 --- a/dts/src/arm/da850-lcdk.dts +++ b/dts/src/arm/da850-lcdk.dts @@ -13,6 +13,7 @@ aliases { serial2 = &serial2; + ethernet0 = ð0; }; chosen { @@ -122,7 +123,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; - cd-gpios = <&gpio 64 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -158,6 +159,14 @@ rx-num-evt = <32>; }; +&usb_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + &aemif { pinctrl-names = "default"; pinctrl-0 = <&nand_pins>; @@ -219,3 +228,11 @@ }; }; }; + +&prictrl { + status = "okay"; +}; + +&memctrl { + status = "okay"; +}; diff --git a/dts/src/arm/da850.dtsi b/dts/src/arm/da850.dtsi index f79e1b91c6..104155d12c 100644 --- a/dts/src/arm/da850.dtsi +++ b/dts/src/arm/da850.dtsi @@ -36,6 +36,7 @@ reg = <0x14120 0x50>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <2>; pinctrl-single,bit-per-mux; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0xf>; @@ -186,8 +187,44 @@ 0xc 0x88888888 0xffffffff >; }; + lcd_pins: pinmux_lcd_pins { + pinctrl-single,bits = < + /* + * LCD_D[2], LCD_D[3], LCD_D[4], LCD_D[5], + * LCD_D[6], LCD_D[7] + */ + 0x40 0x22222200 0xffffff00 + /* + * LCD_D[10], LCD_D[11], LCD_D[12], LCD_D[13], + * LCD_D[14], LCD_D[15], LCD_D[0], LCD_D[1] + */ + 0x44 0x22222222 0xffffffff + /* LCD_D[8], LCD_D[9] */ + 0x48 0x00000022 0x000000ff + + /* LCD_PCLK */ + 0x48 0x02000000 0x0f000000 + /* LCD_AC_ENB_CS, LCD_VSYNC, LCD_HSYNC */ + 0x4c 0x02000022 0x0f0000ff + >; + }; }; + prictrl: priority-controller@14110 { + compatible = "ti,da850-mstpri"; + reg = <0x14110 0x0c>; + status = "disabled"; + }; + cfgchip: chip-controller@1417c { + compatible = "ti,da830-cfgchip", "syscon", "simple-mfd"; + reg = <0x1417c 0x14>; + + usb_phy: usb-phy { + compatible = "ti,da830-usb-phy"; + #phy-cells = <1>; + status = "disabled"; + }; + }; edma0: edma@0 { compatible = "ti,edma3-tpcc"; /* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */ @@ -280,6 +317,8 @@ mmc0: mmc@40000 { compatible = "ti,da830-mmc"; reg = <0x40000 0x1000>; + cap-sd-highspeed; + cap-mmc-highspeed; interrupts = <16>; dmas = <&edma0 16 0>, <&edma0 17 0>; dma-names = "rx", "tx"; @@ -288,6 +327,8 @@ mmc1: mmc@21b000 { compatible = "ti,da830-mmc"; reg = <0x21b000 0x1000>; + cap-sd-highspeed; + cap-mmc-highspeed; interrupts = <72>; dmas = <&edma1 28 0>, <&edma1 29 0>; dma-names = "rx", "tx"; @@ -336,6 +377,8 @@ num-cs = <6>; ti,davinci-spi-intr-line = <1>; interrupts = <20>; + dmas = <&edma0 14 0>, <&edma0 15 0>; + dma-names = "rx", "tx"; status = "disabled"; }; spi1: spi@30e000 { @@ -350,6 +393,16 @@ dma-names = "rx", "tx"; status = "disabled"; }; + usb0: usb@200000 { + compatible = "ti,da830-musb"; + reg = <0x200000 0x10000>; + interrupts = <58>; + interrupt-names = "mc"; + dr_mode = "otg"; + phys = <&usb_phy 0>; + phy-names = "usb-phy"; + status = "disabled"; + }; mdio: mdio@224000 { compatible = "ti,davinci_mdio"; #address-cells = <1>; @@ -386,6 +439,11 @@ ti,davinci-gpio-unbanked = <0>; status = "disabled"; }; + pinconf: pin-controller@22c00c { + compatible = "ti,da850-pupd"; + reg = <0x22c00c 0x8>; + status = "disabled"; + }; mcasp0: mcasp@100000 { compatible = "ti,da830-mcasp-audio"; @@ -399,6 +457,13 @@ <&edma0 0 1>; dma-names = "tx", "rx"; }; + + display: display@213000 { + compatible = "ti,da850-tilcdc"; + reg = <0x213000 0x1000>; + interrupts = <52>; + status = "disabled"; + }; }; aemif: aemif@68000000 { compatible = "ti,da850-aemif"; @@ -410,4 +475,9 @@ 1 0 0x68000000 0x00008000>; status = "disabled"; }; + memctrl: memory-controller@b0000000 { + compatible = "ti,da850-ddr-controller"; + reg = <0xb0000000 0xe8>; + status = "disabled"; + }; }; diff --git a/dts/src/arm/dm814x.dtsi b/dts/src/arm/dm814x.dtsi index ff90a6ce6b..1facc5f12c 100644 --- a/dts/src/arm/dm814x.dtsi +++ b/dts/src/arm/dm814x.dtsi @@ -373,6 +373,7 @@ reg = <0x800 0x438>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x307ff>; }; diff --git a/dts/src/arm/dm816x.dtsi b/dts/src/arm/dm816x.dtsi index f1e0f771ff..61dd2f6b02 100644 --- a/dts/src/arm/dm816x.dtsi +++ b/dts/src/arm/dm816x.dtsi @@ -83,6 +83,7 @@ reg = <0x48140000 0x21000>; #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; ranges = <0 0x48140000 0x21000>; dm816x_pinmux: pinmux@800 { @@ -90,6 +91,7 @@ reg = <0x800 0x50a>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0xf>; }; diff --git a/dts/src/arm/dra7.dtsi b/dts/src/arm/dra7.dtsi index d4fcd68f63..addb7530cf 100644 --- a/dts/src/arm/dra7.dtsi +++ b/dts/src/arm/dra7.dtsi @@ -171,6 +171,7 @@ reg = <0x1400 0x0468>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <32>; diff --git a/dts/src/arm/dra71-evm.dts b/dts/src/arm/dra71-evm.dts new file mode 100644 index 0000000000..2b9a5a8d69 --- /dev/null +++ b/dts/src/arm/dra71-evm.dts @@ -0,0 +1,230 @@ +/* + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "dra72-evm-common.dtsi" +#include <dt-bindings/net/ti-dp83867.h> + +/ { + compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7"; + model = "TI DRA718 EVM"; + + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */ + }; + + vpo_sd_1v8_3v3: gpio-regulator-TPS74801 { + compatible = "regulator-gpio"; + + regulator-name = "vddshv8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + vin-supply = <&evm_5v0>; + + gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + states = <1800000 0x0 + 3000000 0x1>; + }; + + poweroff: gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>; + input; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + lp8733: lp8733@60 { + compatible = "ti,lp8733"; + reg = <0x60>; + + buck0-in-supply =<&vsys_3v3>; + buck1-in-supply =<&vsys_3v3>; + ldo0-in-supply =<&evm_5v0>; + ldo1-in-supply =<&evm_5v0>; + + lp8733_regulators: regulators { + lp8733_buck0_reg: buck0 { + /* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */ + regulator-name = "lp8733-buck0"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + lp8733_buck1_reg: buck1 { + /* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */ + regulator-name = "lp8733-buck1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + + lp8733_ldo0_reg: ldo0 { + /* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */ + regulator-name = "lp8733-ldo0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + lp8733_ldo1_reg: ldo1 { + /* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */ + regulator-name = "lp8733-ldo1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + lp8732: lp8732@61 { + compatible = "ti,lp8732"; + reg = <0x61>; + + buck0-in-supply =<&vsys_3v3>; + buck1-in-supply =<&vsys_3v3>; + ldo0-in-supply =<&vsys_3v3>; + ldo1-in-supply =<&vsys_3v3>; + + lp8732_regulators: regulators { + lp8732_buck0_reg: buck0 { + /* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */ + regulator-name = "lp8732-buck0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + lp8732_buck1_reg: buck1 { + /* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */ + regulator-name = "lp8732-buck1"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + lp8732_ldo0_reg: ldo0 { + /* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */ + regulator-name = "lp8732-ldo0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + lp8732_ldo1_reg: ldo1 { + /* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */ + regulator-name = "lp8732-ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&pcf_gpio_21 { + interrupt-parent = <&gpio7>; + interrupts = <31 IRQ_TYPE_EDGE_FALLING>; +}; + +&pcf_hdmi { + p0 { + /* + * PM_OEn to High: Disable routing I2C3 to PM_I2C + * With this PM_SEL(p3) should not matter + */ + gpio-hog; + gpios = <0 GPIO_ACTIVE_LOW>; + output-high; + line-name = "pm_oe_n"; + }; +}; + +&mmc1 { + vmmc_aux-supply = <&vpo_sd_1v8_3v3>; +}; + +&mac { + mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>, + <&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */ + <&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */ + dual_emac; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <2>; + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <3>; + phy-mode = "rgmii-id"; + dual_emac_res_vlan = <2>; +}; + +&davinci_mdio { + dp83867_0: ethernet-phy@2 { + reg = <2>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,impedance-control = <0x1f>; + }; + + dp83867_1: ethernet-phy@3 { + reg = <3>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,impedance-control = <0x1f>; + }; +}; + +/* No Sata on this device */ +&sata_phy { + status = "disabled"; +}; + +&sata { + status = "disabled"; +}; + +/* No RTC on this device */ +&rtc { + status = "disabled"; +}; + +&usb2_phy1 { + phy-supply = <&lp8733_ldo1_reg>; +}; + +&usb2_phy2 { + phy-supply = <&lp8733_ldo1_reg>; +}; + +&dss { + /* Supplied by VDA_1V8_PLL */ + vdda_video-supply = <&lp8732_ldo0_reg>; +}; + +&hdmi { + /* Supplied by VDA_1V8_PHY */ + vdda_video-supply = <&lp8732_ldo1_reg>; +}; diff --git a/dts/src/arm/dra72-evm-common.dtsi b/dts/src/arm/dra72-evm-common.dtsi index c94d8d6471..e50fbeea96 100644 --- a/dts/src/arm/dra72-evm-common.dtsi +++ b/dts/src/arm/dra72-evm-common.dtsi @@ -18,11 +18,49 @@ display0 = &hdmi0; }; + evm_12v0: fixedregulator-evm12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "evm_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + evm_5v0: fixedregulator-evm5v0 { + /* Output 1 of TPS43351QDAPRQ1 on dra72-evm */ + /* Output 1 of LM5140QRWGTQ1 on dra71-evm */ + compatible = "regulator-fixed"; + regulator-name = "evm_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: fixedregulator-vsys3v3 { + /* Output 2 of TPS43351QDAPRQ1 on dra72-evm */ + /* Output 2 of LM5140QRWGTQ1 on dra71-evm */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + evm_3v3_sw: fixedregulator-evm_3v3 { + /* TPS22965DSG */ compatible = "regulator-fixed"; regulator-name = "evm_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&vsys_3v3>; + regulator-always-on; + regulator-boot-on; }; aic_dvdd: fixedregulator-aic_dvdd { @@ -39,6 +77,7 @@ regulator-name = "evm_3v3_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + vin-supply = <&evm_3v3_sw>; enable-active-high; gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; }; @@ -69,9 +108,6 @@ tpd12s015: encoder { compatible = "ti,tpd12s015"; - pinctrl-names = "default"; - pinctrl-0 = <&tpd12s015_pins>; - gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */ <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */ <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ @@ -134,72 +170,6 @@ }; &dra7_pmx_core { - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ - DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ - >; - }; - - i2c5_pins: pinmux_i2c5_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ - DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ - >; - }; - - i2c5_pins: pinmux_i2c5_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ - DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ - >; - }; - - nand_default: nand_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3400, PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ - DRA7XX_CORE_IOPAD(0x3404, PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */ - DRA7XX_CORE_IOPAD(0x3408, PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */ - DRA7XX_CORE_IOPAD(0x340c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */ - DRA7XX_CORE_IOPAD(0x3410, PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */ - DRA7XX_CORE_IOPAD(0x3414, PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */ - DRA7XX_CORE_IOPAD(0x3418, PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */ - DRA7XX_CORE_IOPAD(0x341c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */ - DRA7XX_CORE_IOPAD(0x3420, PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */ - DRA7XX_CORE_IOPAD(0x3424, PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */ - DRA7XX_CORE_IOPAD(0x3428, PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */ - DRA7XX_CORE_IOPAD(0x342c, PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */ - DRA7XX_CORE_IOPAD(0x3430, PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */ - DRA7XX_CORE_IOPAD(0x3434, PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */ - DRA7XX_CORE_IOPAD(0x3438, PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */ - DRA7XX_CORE_IOPAD(0x343c, PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */ - DRA7XX_CORE_IOPAD(0x34b4, PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */ - DRA7XX_CORE_IOPAD(0x34c4, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */ - DRA7XX_CORE_IOPAD(0x34cc, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */ - DRA7XX_CORE_IOPAD(0x34c8, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */ - DRA7XX_CORE_IOPAD(0x34d0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */ - DRA7XX_CORE_IOPAD(0x34d8, PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */ - >; - }; - - usb1_pins: pinmux_usb1_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */ - >; - }; - - usb2_pins: pinmux_usb2_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3684, PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */ - >; - }; - - tps65917_pins_default: tps65917_pins_default { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3824, PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */ - >; - }; - mmc1_pins_default: mmc1_pins_default { pinctrl-single,pins = < DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */ @@ -240,161 +210,12 @@ DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; - - hdmi_pins: pinmux_hdmi_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ - DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ - >; - }; - - tpd12s015_pins: pinmux_tpd12s015_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ - >; - }; - - atl_pins: pinmux_atl_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3698, PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ - DRA7XX_CORE_IOPAD(0x369c, PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ - >; - }; - - mcasp3_pins: pinmux_mcasp3_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ - DRA7XX_CORE_IOPAD(0x3728, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ - DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ - DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ - >; - }; - - mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT_PULLDOWN | MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE15) - >; - }; }; &i2c1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; clock-frequency = <400000>; - tps65917: tps65917@58 { - compatible = "ti,tps65917"; - reg = <0x58>; - - pinctrl-names = "default"; - pinctrl-0 = <&tps65917_pins_default>; - - interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ - interrupt-controller; - #interrupt-cells = <2>; - - ti,system-power-controller; - - tps65917_pmic { - compatible = "ti,tps65917-pmic"; - - tps65917_regulators: regulators { - smps1_reg: smps1 { - /* VDD_MPU */ - regulator-name = "smps1"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-always-on; - regulator-boot-on; - }; - - smps2_reg: smps2 { - /* VDD_CORE */ - regulator-name = "smps2"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; - - smps3_reg: smps3 { - /* VDD_GPU IVA DSPEVE */ - regulator-name = "smps3"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1250000>; - regulator-boot-on; - regulator-always-on; - }; - - smps4_reg: smps4 { - /* VDDS1V8 */ - regulator-name = "smps4"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - smps5_reg: smps5 { - /* VDD_DDR */ - regulator-name = "smps5"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo1_reg: ldo1 { - /* LDO1_OUT --> SDIO */ - regulator-name = "ldo1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - regulator-allow-bypass; - }; - - ldo3_reg: ldo3 { - /* VDDA_1V8_PHY */ - regulator-name = "ldo3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo5_reg: ldo5 { - /* VDDA_1V8_PLL */ - regulator-name = "ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo4_reg: ldo4 { - /* VDDA_3V_USB: VDDA_USBHS33 */ - regulator-name = "ldo4"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - }; - }; - - tps65917_power_button { - compatible = "ti,palmas-pwrbutton"; - interrupt-parent = <&tps65917>; - interrupts = <1 IRQ_TYPE_NONE>; - wakeup-source; - ti,palmas-long-press-seconds = <6>; - }; - }; - pcf_gpio_21: gpio@21 { compatible = "ti,pcf8575", "nxp,pcf8575"; reg = <0x21>; @@ -423,8 +244,6 @@ &i2c5 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins>; clock-frequency = <400000>; pcf_hdmi: pcf8575@26 { @@ -462,8 +281,6 @@ &gpmc { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&nand_default>; ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */ nand@0,0 { /* To use NAND, DIP switch SW5 must be set like so: @@ -548,14 +365,6 @@ }; }; -&usb2_phy1 { - phy-supply = <&ldo4_reg>; -}; - -&usb2_phy2 { - phy-supply = <&ldo4_reg>; -}; - &omap_dwc3_1 { extcon = <&extcon_usb1>; }; @@ -566,14 +375,10 @@ &usb1 { dr_mode = "peripheral"; - pinctrl-names = "default"; - pinctrl-0 = <&usb1_pins>; }; &usb2 { dr_mode = "host"; - pinctrl-names = "default"; - pinctrl-0 = <&usb2_pins>; }; &mmc1 { @@ -581,7 +386,6 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_default>; vmmc-supply = <&evm_3v3_sd>; - vmmc_aux-supply = <&ldo1_reg>; bus-width = <4>; /* * SDCD signal is not being used here - using the fact that GPIO mode @@ -603,71 +407,8 @@ max-frequency = <192000000>; }; -&dra7_pmx_core { - cpsw_default: cpsw_default { - pinctrl-single,pins = < - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */ - DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */ - DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */ - DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */ - DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */ - DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */ - DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */ - DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */ - DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ - DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ - DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ - DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ - >; - - }; - - cpsw_sleep: cpsw_sleep { - pinctrl-single,pins = < - /* Slave 2 */ - DRA7XX_CORE_IOPAD(0x3598, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x359c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a4, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35a8, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35ac, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b4, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35b8, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35bc, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c0, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x35c4, MUX_MODE15) - >; - }; - - davinci_mdio_default: davinci_mdio_default { - pinctrl-single,pins = < - /* MDIO */ - DRA7XX_CORE_IOPAD(0x363c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */ - DRA7XX_CORE_IOPAD(0x3640, PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ - >; - }; - - davinci_mdio_sleep: davinci_mdio_sleep { - pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x363c, MUX_MODE15) - DRA7XX_CORE_IOPAD(0x3640, MUX_MODE15) - >; - }; -}; - &mac { status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&cpsw_default>; - pinctrl-1 = <&cpsw_sleep>; -}; - -&davinci_mdio { - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&davinci_mdio_default>; - pinctrl-1 = <&davinci_mdio_sleep>; }; &dcan1 { @@ -741,16 +482,11 @@ &dss { status = "ok"; - - vdda_video-supply = <&ldo5_reg>; }; &hdmi { status = "ok"; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_pins>; - port { hdmi_out: endpoint { remote-endpoint = <&tpd12s015_in>; @@ -759,9 +495,6 @@ }; &atl { - pinctrl-names = "default"; - pinctrl-0 = <&atl_pins>; - assigned-clocks = <&abe_dpll_sys_clk_mux>, <&atl_gfclk_mux>, <&dpll_abe_ck>, @@ -780,9 +513,6 @@ &mcasp3 { #sound-dai-cells = <0>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&mcasp3_pins>; - pinctrl-1 = <&mcasp3_sleep_pins>; assigned-clocks = <&mcasp3_ahclkx_mux>; assigned-clock-parents = <&atl_clkin2_ck>; diff --git a/dts/src/arm/dra72-evm-revc.dts b/dts/src/arm/dra72-evm-revc.dts index 064b322a7a..c3d939c966 100644 --- a/dts/src/arm/dra72-evm-revc.dts +++ b/dts/src/arm/dra72-evm-revc.dts @@ -17,17 +17,22 @@ }; }; -&tps65917_regulators { - ldo2_reg: ldo2 { - /* LDO2_OUT --> VDDA_1V8_PHY2 */ - regulator-name = "ldo2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; +&i2c1 { + tps65917: tps65917@58 { + reg = <0x58>; + + interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ }; }; +#include "dra72-evm-tps65917.dtsi" + +&ldo2_reg { + /* LDO2_OUT --> VDDA_1V8_PHY2 */ + regulator-always-on; + regulator-boot-on; +}; + &hdmi { vdda-supply = <&ldo2_reg>; }; @@ -59,15 +64,17 @@ &davinci_mdio { dp83867_0: ethernet-phy@2 { reg = <2>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-impedance; }; dp83867_1: ethernet-phy@3 { reg = <3>; - ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; - ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_NS>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; + ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; + ti,min-output-imepdance; }; }; diff --git a/dts/src/arm/dra72-evm-tps65917.dtsi b/dts/src/arm/dra72-evm-tps65917.dtsi new file mode 100644 index 0000000000..ee6dac44ed --- /dev/null +++ b/dts/src/arm/dra72-evm-tps65917.dtsi @@ -0,0 +1,134 @@ +/* + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65917-q1.pdf + */ + +&tps65917 { + compatible = "ti,tps65917"; + + interrupt-controller; + #interrupt-cells = <2>; + + ti,system-power-controller; + + tps65917_pmic { + compatible = "ti,tps65917-pmic"; + + smps1-in-supply = <&vsys_3v3>; + smps2-in-supply = <&vsys_3v3>; + smps3-in-supply = <&vsys_3v3>; + smps4-in-supply = <&vsys_3v3>; + smps5-in-supply = <&vsys_3v3>; + ldo1-in-supply = <&vsys_3v3>; + ldo2-in-supply = <&vsys_3v3>; + ldo3-in-supply = <&vsys_3v3>; + ldo4-in-supply = <&evm_5v0>; + ldo5-in-supply = <&vsys_3v3>; + + tps65917_regulators: regulators { + smps1_reg: smps1 { + /* VDD_MPU */ + regulator-name = "smps1"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-boot-on; + }; + + smps2_reg: smps2 { + /* VDD_CORE */ + regulator-name = "smps2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + smps3_reg: smps3 { + /* VDD_GPU IVA DSPEVE */ + regulator-name = "smps3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-boot-on; + regulator-always-on; + }; + + smps4_reg: smps4 { + /* VDDS1V8 */ + regulator-name = "smps4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps5_reg: smps5 { + /* VDD_DDR */ + regulator-name = "smps5"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + /* LDO1_OUT --> SDIO */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-allow-bypass; + }; + + ldo2_reg: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-bypass; + }; + + ldo3_reg: ldo3 { + /* VDDA_1V8_PHY */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PLL */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo4_reg: ldo4 { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldo4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; + }; + + tps65917_power_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&tps65917>; + interrupts = <1 IRQ_TYPE_NONE>; + wakeup-source; + ti,palmas-long-press-seconds = <6>; + }; +}; diff --git a/dts/src/arm/dra72-evm.dts b/dts/src/arm/dra72-evm.dts index e3a9b69856..cd9c4ff126 100644 --- a/dts/src/arm/dra72-evm.dts +++ b/dts/src/arm/dra72-evm.dts @@ -15,16 +15,16 @@ }; }; -&tps65917_regulators { - ldo2_reg: ldo2 { - /* LDO2_OUT --> TP1017 (UNUSED) */ - regulator-name = "ldo2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-allow-bypass; +&i2c1 { + tps65917: tps65917@58 { + reg = <0x58>; + + interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */ }; }; +#include "dra72-evm-tps65917.dtsi" + &hdmi { vdda-supply = <&ldo3_reg>; }; diff --git a/dts/src/arm/emev2.dtsi b/dts/src/arm/emev2.dtsi index cd119400f4..0124faf175 100644 --- a/dts/src/arm/emev2.dtsi +++ b/dts/src/arm/emev2.dtsi @@ -8,13 +8,14 @@ * kind, whether express or implied. */ -#include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> / { compatible = "renesas,emev2"; interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; aliases { gpio0 = &gpio0; diff --git a/dts/src/arm/exynos3250-artik5-eval.dts b/dts/src/arm/exynos3250-artik5-eval.dts index be4d6aa379..4bd2ee8712 100644 --- a/dts/src/arm/exynos3250-artik5-eval.dts +++ b/dts/src/arm/exynos3250-artik5-eval.dts @@ -28,7 +28,7 @@ vqmmc-supply = <&ldo3_reg>; card-detect-delay = <200>; clock-frequency = <100000000>; - clock-freq-min-max = <400000 100000000>; + max-frequency = <100000000>; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/dts/src/arm/exynos3250-artik5.dtsi b/dts/src/arm/exynos3250-artik5.dtsi index a70819b1b7..59c89d7662 100644 --- a/dts/src/arm/exynos3250-artik5.dtsi +++ b/dts/src/arm/exynos3250-artik5.dtsi @@ -310,7 +310,7 @@ card-detect-delay = <200>; vmmc-supply = <&ldo12_reg>; clock-frequency = <100000000>; - clock-freq-min-max = <400000 100000000>; + max-frequency = <100000000>; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/dts/src/arm/exynos3250-monk.dts b/dts/src/arm/exynos3250-monk.dts index 66f04f6ba6..cccfe4b791 100644 --- a/dts/src/arm/exynos3250-monk.dts +++ b/dts/src/arm/exynos3250-monk.dts @@ -435,7 +435,7 @@ card-detect-delay = <200>; vmmc-supply = <&vemmc_reg>; clock-frequency = <100000000>; - clock-freq-min-max = <400000 100000000>; + max-frequency = <100000000>; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/dts/src/arm/exynos3250-pinctrl.dtsi b/dts/src/arm/exynos3250-pinctrl.dtsi index ec331169c3..a149f148e6 100644 --- a/dts/src/arm/exynos3250-pinctrl.dtsi +++ b/dts/src/arm/exynos3250-pinctrl.dtsi @@ -362,8 +362,14 @@ interrupt-controller; interrupt-parent = <&gic>; - interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>, - <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; }; @@ -373,8 +379,14 @@ interrupt-controller; interrupt-parent = <&gic>; - interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>, - <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; }; diff --git a/dts/src/arm/exynos3250-rinato.dts b/dts/src/arm/exynos3250-rinato.dts index 3967ee5f77..548413e23c 100644 --- a/dts/src/arm/exynos3250-rinato.dts +++ b/dts/src/arm/exynos3250-rinato.dts @@ -649,7 +649,7 @@ card-detect-delay = <200>; vmmc-supply = <&ldo12_reg>; clock-frequency = <100000000>; - clock-freq-min-max = <400000 100000000>; + max-frequency = <100000000>; samsung,dw-mshc-ciu-div = <1>; samsung,dw-mshc-sdr-timing = <0 1>; samsung,dw-mshc-ddr-timing = <1 2>; diff --git a/dts/src/arm/exynos3250.dtsi b/dts/src/arm/exynos3250.dtsi index e9d2556c0d..ba17ee1eb7 100644 --- a/dts/src/arm/exynos3250.dtsi +++ b/dts/src/arm/exynos3250.dtsi @@ -20,6 +20,8 @@ #include "exynos4-cpu-thermal.dtsi" #include "exynos-syscon-restart.dtsi" #include <dt-bindings/clock/exynos3250.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> / { compatible = "samsung,exynos3250"; @@ -211,7 +213,8 @@ rtc: rtc@10070000 { compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; - interrupts = <0 73 0>, <0 74 0>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&pmu_system_controller>; status = "disabled"; }; @@ -219,7 +222,7 @@ tmu: tmu@100C0000 { compatible = "samsung,exynos3250-tmu"; reg = <0x100C0000 0x100>; - interrupts = <0 216 0>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_TMU_APBIF>; clock-names = "tmu_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -234,14 +237,21 @@ <0x10482000 0x1000>, <0x10484000 0x2000>, <0x10486000 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; mct@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; - interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>, - <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>; + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>; clock-names = "fin_pll", "mct"; }; @@ -249,24 +259,24 @@ pinctrl_1: pinctrl@11000000 { compatible = "samsung,exynos3250-pinctrl"; reg = <0x11000000 0x1000>; - interrupts = <0 225 0>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; - interrupts = <0 48 0>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; }; }; pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos3250-pinctrl"; reg = <0x11400000 0x1000>; - interrupts = <0 240 0>; + interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>; }; jpeg: codec@11830000 { compatible = "samsung,exynos3250-jpeg"; reg = <0x11830000 0x1000>; - interrupts = <0 171 0>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>; clock-names = "jpeg", "sclk"; power-domains = <&pd_cam>; @@ -280,7 +290,8 @@ sysmmu_jpeg: sysmmu@11A60000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11a60000 0x1000>; - interrupts = <0 156 0>, <0 161 0>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>; power-domains = <&pd_cam>; @@ -291,7 +302,9 @@ compatible = "samsung,exynos3250-fimd"; reg = <0x11c00000 0x30000>; interrupt-names = "fifo", "vsync", "lcd_sys"; - interrupts = <0 84 0>, <0 85 0>, <0 86 0>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; power-domains = <&pd_lcd0>; @@ -303,7 +316,7 @@ dsi_0: dsi@11C80000 { compatible = "samsung,exynos3250-mipi-dsi"; reg = <0x11C80000 0x10000>; - interrupts = <0 83 0>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; samsung,phy-type = <0>; power-domains = <&pd_lcd0>; phys = <&mipi_phy 1>; @@ -318,7 +331,8 @@ sysmmu_fimd0: sysmmu@11E20000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11e20000 0x1000>; - interrupts = <0 80 0>, <0 81 0>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>; power-domains = <&pd_lcd0>; @@ -328,7 +342,7 @@ hsotg: hsotg@12480000 { compatible = "snps,dwc2"; reg = <0x12480000 0x20000>; - interrupts = <0 141 0>; + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_USBOTG>; clock-names = "otg"; phys = <&exynos_usbphy 0>; @@ -339,7 +353,7 @@ mshc_0: mshc@12510000 { compatible = "samsung,exynos5420-dw-mshc"; reg = <0x12510000 0x1000>; - interrupts = <0 142 0>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>; clock-names = "biu", "ciu"; fifo-depth = <0x80>; @@ -351,7 +365,7 @@ mshc_1: mshc@12520000 { compatible = "samsung,exynos5420-dw-mshc"; reg = <0x12520000 0x1000>; - interrupts = <0 143 0>; + interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>; clock-names = "biu", "ciu"; fifo-depth = <0x80>; @@ -363,7 +377,7 @@ mshc_2: mshc@12530000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12530000 0x1000>; - interrupts = <0 144 0>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>; clock-names = "biu", "ciu"; fifo-depth = <0x80>; @@ -391,7 +405,7 @@ pdma0: pdma@12680000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12680000 0x1000>; - interrupts = <0 138 0>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -402,7 +416,7 @@ pdma1: pdma@12690000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12690000 0x1000>; - interrupts = <0 139 0>; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -415,7 +429,7 @@ compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2"; reg = <0x126C0000 0x100>; - interrupts = <0 137 0>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; clock-names = "adc", "sclk"; clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; #io-channel-cells = <1>; @@ -427,7 +441,7 @@ mfc: codec@13400000 { compatible = "samsung,mfc-v7"; reg = <0x13400000 0x10000>; - interrupts = <0 102 0>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clock-names = "mfc", "sclk_mfc"; clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>; power-domains = <&pd_mfc>; @@ -437,7 +451,8 @@ sysmmu_mfc: sysmmu@13620000 { compatible = "samsung,exynos-sysmmu"; reg = <0x13620000 0x1000>; - interrupts = <0 96 0>, <0 98 0>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>; power-domains = <&pd_mfc>; @@ -447,7 +462,7 @@ serial_0: serial@13800000 { compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x100>; - interrupts = <0 109 0>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; pinctrl-names = "default"; @@ -458,7 +473,7 @@ serial_1: serial@13810000 { compatible = "samsung,exynos4210-uart"; reg = <0x13810000 0x100>; - interrupts = <0 110 0>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; pinctrl-names = "default"; @@ -469,7 +484,7 @@ serial_2: serial@13820000 { compatible = "samsung,exynos4210-uart"; reg = <0x13820000 0x100>; - interrupts = <0 111 0>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; pinctrl-names = "default"; @@ -482,7 +497,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x13860000 0x100>; - interrupts = <0 113 0>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2C0>; clock-names = "i2c"; pinctrl-names = "default"; @@ -495,7 +510,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x13870000 0x100>; - interrupts = <0 114 0>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2C1>; clock-names = "i2c"; pinctrl-names = "default"; @@ -508,7 +523,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x13880000 0x100>; - interrupts = <0 115 0>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2C2>; clock-names = "i2c"; pinctrl-names = "default"; @@ -521,7 +536,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x13890000 0x100>; - interrupts = <0 116 0>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2C3>; clock-names = "i2c"; pinctrl-names = "default"; @@ -534,7 +549,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x138A0000 0x100>; - interrupts = <0 117 0>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2C4>; clock-names = "i2c"; pinctrl-names = "default"; @@ -547,7 +562,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x138B0000 0x100>; - interrupts = <0 118 0>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2C5>; clock-names = "i2c"; pinctrl-names = "default"; @@ -560,7 +575,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x138C0000 0x100>; - interrupts = <0 119 0>; + interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2C6>; clock-names = "i2c"; pinctrl-names = "default"; @@ -573,7 +588,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x138D0000 0x100>; - interrupts = <0 120 0>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2C7>; clock-names = "i2c"; pinctrl-names = "default"; @@ -584,7 +599,7 @@ spi_0: spi@13920000 { compatible = "samsung,exynos4210-spi"; reg = <0x13920000 0x100>; - interrupts = <0 121 0>; + interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma0 7>, <&pdma0 6>; dma-names = "tx", "rx"; #address-cells = <1>; @@ -600,7 +615,7 @@ spi_1: spi@13930000 { compatible = "samsung,exynos4210-spi"; reg = <0x13930000 0x100>; - interrupts = <0 122 0>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma1 7>, <&pdma1 6>; dma-names = "tx", "rx"; #address-cells = <1>; @@ -616,7 +631,7 @@ i2s2: i2s@13970000 { compatible = "samsung,s3c6410-i2s"; reg = <0x13970000 0x100>; - interrupts = <0 126 0>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>; clock-names = "iis", "i2s_opclk0"; dmas = <&pdma0 14>, <&pdma0 13>; @@ -629,15 +644,19 @@ pwm: pwm@139D0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x139D0000 0x1000>; - interrupts = <0 104 0>, <0 105 0>, <0 106 0>, - <0 107 0>, <0 108 0>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; #pwm-cells = <3>; status = "disabled"; }; pmu { compatible = "arm,cortex-a7-pmu"; - interrupts = <0 18 0>, <0 19 0>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; }; ppmu_dmc0: ppmu_dmc0@106a0000 { diff --git a/dts/src/arm/exynos4.dtsi b/dts/src/arm/exynos4.dtsi index 5f034eb5a5..c64737baa4 100644 --- a/dts/src/arm/exynos4.dtsi +++ b/dts/src/arm/exynos4.dtsi @@ -21,6 +21,8 @@ #include <dt-bindings/clock/exynos4.h> #include <dt-bindings/clock/exynos-audss-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "exynos-syscon-restart.dtsi" / { @@ -78,6 +80,11 @@ reg = <0x10000000 0x100>; }; + scu: snoop-control-unit@10500000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x10500000 0x2000>; + }; + memory-controller@12570000 { compatible = "samsung,exynos4210-srom"; reg = <0x12570000 0x14>; @@ -168,7 +175,7 @@ dsi_0: dsi@11C80000 { compatible = "samsung,exynos4210-mipi-dsi"; reg = <0x11C80000 0x10000>; - interrupts = <0 79 0>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_lcd0>; phys = <&mipi_phy 1>; phy-names = "dsim"; @@ -191,7 +198,7 @@ fimc_0: fimc@11800000 { compatible = "samsung,exynos4210-fimc"; reg = <0x11800000 0x1000>; - interrupts = <0 84 0>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>; clock-names = "fimc", "sclk_fimc"; power-domains = <&pd_cam>; @@ -203,7 +210,7 @@ fimc_1: fimc@11810000 { compatible = "samsung,exynos4210-fimc"; reg = <0x11810000 0x1000>; - interrupts = <0 85 0>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>; clock-names = "fimc", "sclk_fimc"; power-domains = <&pd_cam>; @@ -215,7 +222,7 @@ fimc_2: fimc@11820000 { compatible = "samsung,exynos4210-fimc"; reg = <0x11820000 0x1000>; - interrupts = <0 86 0>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>; clock-names = "fimc", "sclk_fimc"; power-domains = <&pd_cam>; @@ -227,7 +234,7 @@ fimc_3: fimc@11830000 { compatible = "samsung,exynos4210-fimc"; reg = <0x11830000 0x1000>; - interrupts = <0 87 0>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>; clock-names = "fimc", "sclk_fimc"; power-domains = <&pd_cam>; @@ -239,7 +246,7 @@ csis_0: csis@11880000 { compatible = "samsung,exynos4210-csis"; reg = <0x11880000 0x4000>; - interrupts = <0 78 0>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>; clock-names = "csis", "sclk_csis"; bus-width = <4>; @@ -254,7 +261,7 @@ csis_1: csis@11890000 { compatible = "samsung,exynos4210-csis"; reg = <0x11890000 0x4000>; - interrupts = <0 80 0>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>; clock-names = "csis", "sclk_csis"; bus-width = <2>; @@ -270,7 +277,7 @@ watchdog: watchdog@10060000 { compatible = "samsung,s3c2410-wdt"; reg = <0x10060000 0x100>; - interrupts = <0 43 0>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_WDT>; clock-names = "watchdog"; status = "disabled"; @@ -280,7 +287,8 @@ compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; interrupt-parent = <&pmu_system_controller>; - interrupts = <0 44 0>, <0 45 0>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_RTC>; clock-names = "rtc"; status = "disabled"; @@ -289,7 +297,7 @@ keypad: keypad@100A0000 { compatible = "samsung,s5pv210-keypad"; reg = <0x100A0000 0x100>; - interrupts = <0 109 0>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_KEYIF>; clock-names = "keypad"; status = "disabled"; @@ -298,7 +306,7 @@ sdhci_0: sdhci@12510000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12510000 0x100>; - interrupts = <0 73 0>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>; clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; @@ -307,7 +315,7 @@ sdhci_1: sdhci@12520000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12520000 0x100>; - interrupts = <0 74 0>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>; clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; @@ -316,7 +324,7 @@ sdhci_2: sdhci@12530000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12530000 0x100>; - interrupts = <0 75 0>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>; clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; @@ -325,7 +333,7 @@ sdhci_3: sdhci@12540000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12540000 0x100>; - interrupts = <0 76 0>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>; clock-names = "hsmmc", "mmc_busclk.2"; status = "disabled"; @@ -344,7 +352,7 @@ hsotg: hsotg@12480000 { compatible = "samsung,s3c6400-hsotg"; reg = <0x12480000 0x20000>; - interrupts = <0 71 0>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_USB_DEVICE>; clock-names = "otg"; phys = <&exynos_usbphy 0>; @@ -355,7 +363,7 @@ ehci: ehci@12580000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12580000 0x100>; - interrupts = <0 70 0>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_USB_HOST>; clock-names = "usbhost"; status = "disabled"; @@ -381,7 +389,7 @@ ohci: ohci@12590000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12590000 0x100>; - interrupts = <0 70 0>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_USB_HOST>; clock-names = "usbhost"; status = "disabled"; @@ -423,7 +431,7 @@ mfc: codec@13400000 { compatible = "samsung,mfc-v5"; reg = <0x13400000 0x10000>; - interrupts = <0 94 0>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_mfc>; clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>; clock-names = "mfc", "sclk_mfc"; @@ -434,7 +442,7 @@ serial_0: serial@13800000 { compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x100>; - interrupts = <0 52 0>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; dmas = <&pdma0 15>, <&pdma0 16>; @@ -445,7 +453,7 @@ serial_1: serial@13810000 { compatible = "samsung,exynos4210-uart"; reg = <0x13810000 0x100>; - interrupts = <0 53 0>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; dmas = <&pdma1 15>, <&pdma1 16>; @@ -456,7 +464,7 @@ serial_2: serial@13820000 { compatible = "samsung,exynos4210-uart"; reg = <0x13820000 0x100>; - interrupts = <0 54 0>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; dmas = <&pdma0 17>, <&pdma0 18>; @@ -467,7 +475,7 @@ serial_3: serial@13830000 { compatible = "samsung,exynos4210-uart"; reg = <0x13830000 0x100>; - interrupts = <0 55 0>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; dmas = <&pdma1 17>, <&pdma1 18>; @@ -480,7 +488,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x13860000 0x100>; - interrupts = <0 58 0>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C0>; clock-names = "i2c"; pinctrl-names = "default"; @@ -493,7 +501,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x13870000 0x100>; - interrupts = <0 59 0>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C1>; clock-names = "i2c"; pinctrl-names = "default"; @@ -506,7 +514,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x13880000 0x100>; - interrupts = <0 60 0>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C2>; clock-names = "i2c"; pinctrl-names = "default"; @@ -519,7 +527,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x13890000 0x100>; - interrupts = <0 61 0>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C3>; clock-names = "i2c"; pinctrl-names = "default"; @@ -532,7 +540,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x138A0000 0x100>; - interrupts = <0 62 0>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C4>; clock-names = "i2c"; pinctrl-names = "default"; @@ -545,7 +553,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x138B0000 0x100>; - interrupts = <0 63 0>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C5>; clock-names = "i2c"; pinctrl-names = "default"; @@ -558,7 +566,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x138C0000 0x100>; - interrupts = <0 64 0>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C6>; clock-names = "i2c"; pinctrl-names = "default"; @@ -571,7 +579,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; reg = <0x138D0000 0x100>; - interrupts = <0 65 0>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C7>; clock-names = "i2c"; pinctrl-names = "default"; @@ -584,7 +592,7 @@ #size-cells = <0>; compatible = "samsung,s3c2440-hdmiphy-i2c"; reg = <0x138E0000 0x100>; - interrupts = <0 93 0>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_I2C_HDMI>; clock-names = "i2c"; status = "disabled"; @@ -598,7 +606,7 @@ spi_0: spi@13920000 { compatible = "samsung,exynos4210-spi"; reg = <0x13920000 0x100>; - interrupts = <0 66 0>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma0 7>, <&pdma0 6>; dma-names = "tx", "rx"; #address-cells = <1>; @@ -613,7 +621,7 @@ spi_1: spi@13930000 { compatible = "samsung,exynos4210-spi"; reg = <0x13930000 0x100>; - interrupts = <0 67 0>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma1 7>, <&pdma1 6>; dma-names = "tx", "rx"; #address-cells = <1>; @@ -628,7 +636,7 @@ spi_2: spi@13940000 { compatible = "samsung,exynos4210-spi"; reg = <0x13940000 0x100>; - interrupts = <0 68 0>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma0 9>, <&pdma0 8>; dma-names = "tx", "rx"; #address-cells = <1>; @@ -643,7 +651,11 @@ pwm: pwm@139D0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x139D0000 0x1000>; - interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PWM>; clock-names = "timers"; #pwm-cells = <3>; @@ -660,7 +672,7 @@ pdma0: pdma@12680000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12680000 0x1000>; - interrupts = <0 35 0>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -671,7 +683,7 @@ pdma1: pdma@12690000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12690000 0x1000>; - interrupts = <0 36 0>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -682,7 +694,7 @@ mdma1: mdma@12850000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x12850000 0x1000>; - interrupts = <0 34 0>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MDMA>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -712,7 +724,7 @@ jpeg_codec: jpeg-codec@11840000 { compatible = "samsung,exynos4210-jpeg"; reg = <0x11840000 0x1000>; - interrupts = <0 88 0>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_JPEG>; clock-names = "jpeg"; power-domains = <&pd_cam>; @@ -722,7 +734,7 @@ rotator: rotator@12810000 { compatible = "samsung,exynos4210-rotator"; reg = <0x12810000 0x64>; - interrupts = <0 83 0>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_ROTATOR>; clock-names = "rotator"; iommus = <&sysmmu_rotator>; @@ -731,7 +743,7 @@ hdmi: hdmi@12D00000 { compatible = "samsung,exynos4210-hdmi"; reg = <0x12D00000 0x70000>; - interrupts = <0 92 0>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, @@ -746,7 +758,7 @@ hdmicec: cec@100B0000 { compatible = "samsung,s5p-cec"; reg = <0x100B0000 0x200>; - interrupts = <0 114 0>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_HDMI_CEC>; clock-names = "hdmicec"; samsung,syscon-phandle = <&pmu_system_controller>; @@ -757,7 +769,7 @@ mixer: mixer@12C10000 { compatible = "samsung,exynos4210-mixer"; - interrupts = <0 91 0>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; reg = <0x12C10000 0x2100>, <0x12c00000 0x300>; power-domains = <&pd_tv>; iommus = <&sysmmu_tv>; @@ -984,7 +996,7 @@ sss: sss@10830000 { compatible = "samsung,exynos4210-secss"; reg = <0x10830000 0x300>; - interrupts = <0 112 0>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SSS>; clock-names = "secss"; }; diff --git a/dts/src/arm/exynos4210-pinctrl.dtsi b/dts/src/arm/exynos4210-pinctrl.dtsi index d9b6d25e4a..f280954b26 100644 --- a/dts/src/arm/exynos4210-pinctrl.dtsi +++ b/dts/src/arm/exynos4210-pinctrl.dtsi @@ -537,8 +537,14 @@ interrupt-controller; interrupt-parent = <&gic>; - interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; }; @@ -548,8 +554,14 @@ interrupt-controller; interrupt-parent = <&gic>; - interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; }; diff --git a/dts/src/arm/exynos4210.dtsi b/dts/src/arm/exynos4210.dtsi index 2d9b029671..7f3a18c8f6 100644 --- a/dts/src/arm/exynos4210.dtsi +++ b/dts/src/arm/exynos4210.dtsi @@ -109,12 +109,12 @@ #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = <0 &gic 0 57 0>, - <1 &gic 0 69 0>, + interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, + <1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>, <2 &combiner 12 6>, <3 &combiner 12 7>, - <4 &gic 0 42 0>, - <5 &gic 0 48 0>; + <4 &gic 0 42 IRQ_TYPE_LEVEL_HIGH>, + <5 &gic 0 48 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -127,18 +127,18 @@ pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos4210-pinctrl"; reg = <0x11400000 0x1000>; - interrupts = <0 47 0>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_1: pinctrl@11000000 { compatible = "samsung,exynos4210-pinctrl"; reg = <0x11000000 0x1000>; - interrupts = <0 46 0>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; wakup_eint: wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <0 32 0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -182,7 +182,7 @@ g2d: g2d@12800000 { compatible = "samsung,s5pv210-g2d"; reg = <0x12800000 0x1000>; - interrupts = <0 89 0>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; clock-names = "sclk_fimg2d", "fimg2d"; power-domains = <&pd_lcd0>; @@ -424,10 +424,22 @@ &combiner { samsung,combiner-nr = <16>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; }; &mdma1 { diff --git a/dts/src/arm/exynos4412-itop-elite.dts b/dts/src/arm/exynos4412-itop-elite.dts new file mode 100644 index 0000000000..76d87f3971 --- /dev/null +++ b/dts/src/arm/exynos4412-itop-elite.dts @@ -0,0 +1,240 @@ +/* + * TOPEET's Exynos4412 based itop board device tree source + * + * Copyright (c) 2016 SUMOMO Computer Association + * https://www.sumomo.mobi + * Randy Li <ayaka@soulik.info> + * + * Device tree source file for TOPEET iTop Exynos 4412 core board + * which is based on Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/sound/samsung-i2s.h> +#include "exynos4412-itop-scp-core.dtsi" + +/ { + model = "TOPEET iTop 4412 Elite board based on Exynos4412"; + compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4"; + + chosen { + bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait"; + stdout-path = "serial2:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led2 { + label = "red:system"; + gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + led3 { + label = "red:user"; + gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + home { + label = "GPIO Key Home"; + linux,code = <KEY_HOME>; + gpios = <&gpx1 1 GPIO_ACTIVE_LOW>; + }; + + back { + label = "GPIO Key Back"; + linux,code = <KEY_BACK>; + gpios = <&gpx1 2 GPIO_ACTIVE_LOW>; + }; + + sleep { + label = "GPIO Key Sleep"; + linux,code = <KEY_POWER>; + gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; + }; + + vol-up { + label = "GPIO Key Vol+"; + linux,code = <KEY_UP>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; + }; + + vol-down { + label = "GPIO Key Vol-"; + linux,code = <KEY_DOWN>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "wm-sound"; + + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-rates = <0>, + <0>, + <112896000>, + <11289600>; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HP_L", + "Headphone Jack", "HP_R", + "Speaker", "SPK_LP", + "Speaker", "SPK_LN", + "Speaker", "SPK_RP", + "Speaker", "SPK_RN", + "LINPUT1", "Mic Jack", + "LINPUT3", "Mic Jack", + "RINPUT1", "Mic Jack", + "RINPUT2", "Mic Jack"; + + simple-audio-card,cpu { + sound-dai = <&i2s0 0>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + system-clock-frequency = <11289600>; + }; + }; + + beep { + compatible = "pwm-beeper"; + pwms = <&pwm 0 4000000 PWM_POLARITY_INVERTED>; + }; + + camera: camera { + pinctrl-0 = <&cam_port_a_clk_active>; + pinctrl-names = "default"; + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_CAM0>; + assigned-clock-parents = <&clock CLK_XUSBXTI>; + }; +}; + +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; +}; + +&ehci { + status = "okay"; + /* In order to reset USB ethernet */ + samsung,vbus-gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; + + port@0 { + status = "okay"; + }; + + port@2 { + status = "okay"; + }; +}; + +&exynos_usbphy { + status = "okay"; +}; + +&fimc_0 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&hsotg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&i2c_4 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c4_bus>; + pinctrl-names = "default"; + status = "okay"; + + codec: wm8960@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&pmu_system_controller 0>; + clock-names = "MCLK1"; + wlf,shared-lrclk; + #sound-dai-cells = <0>; + }; +}; + +&i2s0 { + pinctrl-0 = <&i2s0_bus>; + pinctrl-names = "default"; + status = "okay"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; +}; + +&pinctrl_1 { + ether-reset { + samsung,pins = "gpc0-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +}; + +&pwm { + status = "okay"; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>; +}; + +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + cd-gpio = <&gpx0 7 GPIO_ACTIVE_LOW>; + cap-sd-highspeed; + vmmc-supply = <&ldo23_reg>; + vqmmc-supply = <&ldo17_reg>; + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; diff --git a/dts/src/arm/exynos4412-itop-scp-core.dtsi b/dts/src/arm/exynos4412-itop-scp-core.dtsi new file mode 100644 index 0000000000..a36cd36a26 --- /dev/null +++ b/dts/src/arm/exynos4412-itop-scp-core.dtsi @@ -0,0 +1,501 @@ +/* + * TOPEET's Exynos4412 based itop board device tree source + * + * Copyright (c) 2016 SUMOMO Computer Association + * https://www.sumomo.mobi + * Randy Li <ayaka@soulik.info> + * + * Device tree source file for TOPEET iTop Exynos 4412 SCP package core + * board which is based on Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "exynos4412.dtsi" +#include "exynos4412-ppmu-common.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" + +/ { + memory@40000000 { + device_type = "memory"; + reg = <0x40000000 0x40000000>; + }; + + firmware@0203F000 { + compatible = "samsung,secure-firmware"; + reg = <0x0203F000 0x1000>; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>; + }; + }; + }; + }; + + usb-hub { + compatible = "smsc,usb3503a"; + reset-gpios = <&gpm2 4 GPIO_ACTIVE_LOW>; + connect-gpios = <&gpm3 3 GPIO_ACTIVE_HIGH>; + intn-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hsic_reset>; + }; +}; + +&bus_dmc { + devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; + vdd-supply = <&buck1_reg>; + status = "okay"; +}; + +&bus_acp { + devfreq = <&bus_dmc>; + status = "okay"; +}; + +&bus_c2c { + devfreq = <&bus_dmc>; + status = "okay"; +}; + +&bus_leftbus { + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; + vdd-supply = <&buck3_reg>; + status = "okay"; +}; + +&bus_rightbus { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_fsys { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_peri { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_mfc { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + +&hsotg { + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; +}; + +&i2c_1 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c1_bus>; + pinctrl-names = "default"; + status = "okay"; + + s5m8767: s5m8767-pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + s5m8767,pmic-buck-default-dvs-idx = <3>; + + s5m8767,pmic-buck-dvs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>, + <&gpb 6 GPIO_ACTIVE_HIGH>, + <&gpb 7 GPIO_ACTIVE_HIGH>; + + s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>, + <&gpm3 6 GPIO_ACTIVE_HIGH>, + <&gpm3 7 GPIO_ACTIVE_HIGH>; + + /* VDD_ARM */ + s5m8767,pmic-buck2-dvs-voltage = <1356250>, <1300000>, + <1243750>, <1118750>, + <1068750>, <1012500>, + <956250>, <900000>; + /* VDD_INT */ + s5m8767,pmic-buck3-dvs-voltage = <1000000>, <1000000>, + <925000>, <925000>, + <887500>, <887500>, + <850000>, <850000>; + /* VDD_G3D */ + s5m8767,pmic-buck4-dvs-voltage = <1081250>, <1081250>, + <1025000>, <950000>, + <918750>, <900000>, + <875000>, <831250>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + /* SCP uses 1.5v, POP uses 1.2v */ + ldo2_reg: LDO2 { + regulator-name = "VDDQ_M12"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo3_reg: LDO3 { + regulator-name = "VDDIOAP_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo4_reg: LDO4 { + regulator-name = "VDDQ_PRE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD_LDO5"; + op_mode = <0>; /* Always off Mode */ + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MPLL"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD10_XPLL"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD10_MIPI"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD33_LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD18_MIPI"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD18_ABB1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD33_UOTG"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDIOPERI_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB02"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_USH"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo17_reg: LDO17 { + regulator-name = "VDDIOAP_MMC012_28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; /* Normal Mode */ + }; + + /* Used by HSIC */ + ldo18_reg: LDO18 { + regulator-name = "VDDIOPERI_28"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo19_reg: LDO19 { + regulator-name = "VDD_LDO19"; + op_mode = <0>; /* Always off Mode */ + }; + + ldo20_reg: LDO20 { + regulator-name = "VDD28_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo21_reg: LDO21 { + regulator-name = "VDD28_AF"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo22_reg: LDO22 { + regulator-name = "VDDA28_2M"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo23_reg: LDO23 { + regulator-name = "VDD28_TF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo24_reg: LDO24 { + regulator-name = "VDD33_A31"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo25_reg: LDO25 { + regulator-name = "VDD18_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo26_reg: LDO26 { + regulator-name = "VDD18_A31"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo27_reg: LDO27 { + regulator-name = "GPS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo28_reg: LDO28 { + regulator-name = "DVDD12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + op_mode = <1>; /* Normal Mode */ + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1456250>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_m12"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd12_5m"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck7_reg: BUCK7 { + regulator-name = "pvdd_buck7"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck8_reg: BUCK8 { + regulator-name = "pvdd_buck8"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck9_reg: BUCK9 { + regulator-name = "vddf28_emmc"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3000000>; + op_mode = <1>; /* Normal Mode */ + }; + }; + + s5m8767_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s5m8767_ap", + "s5m8767_cp", "s5m8767_bt"; + }; + + }; +}; + +&mfc { + status = "okay"; +}; + +&mshc_0 { + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + status = "okay"; + vmmc-supply = <&buck9_reg>; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&pinctrl_1 { + hsic_reset: hsic-reset { + samsung,pins = "gpm2-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; + }; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&tmu { + vtmu-supply = <&ldo16_reg>; + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/dts/src/arm/exynos4412-odroidx.dts b/dts/src/arm/exynos4412-odroidx.dts index 61906b35ea..153a75fe6e 100644 --- a/dts/src/arm/exynos4412-odroidx.dts +++ b/dts/src/arm/exynos4412-odroidx.dts @@ -64,6 +64,11 @@ }; }; +&adc { + vdd-supply = <&ldo10_reg>; + status = "okay"; +}; + /* VDDQ for MSHC (eMMC card) */ &buck8_reg { regulator-name = "BUCK8_VDDQ_MMC4_2.8V"; diff --git a/dts/src/arm/exynos4415-pinctrl.dtsi b/dts/src/arm/exynos4415-pinctrl.dtsi deleted file mode 100644 index 76cfd872ea..0000000000 --- a/dts/src/arm/exynos4415-pinctrl.dtsi +++ /dev/null @@ -1,575 +0,0 @@ -/* - * Samsung's Exynos4415 SoCs pin-mux and pin-config device tree source - * - * Copyright (c) 2014 Samsung Electronics Co., Ltd. - * - * Samsung's Exynos4415 SoCs pin-mux and pin-config optiosn are listed as device - * tree nodes are listed in this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <dt-bindings/pinctrl/samsung.h> - -&pinctrl_0 { - gpa0: gpa0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpa1: gpa1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpb: gpb { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpc0: gpc0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpc1: gpc1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpd0: gpd0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpd1: gpd1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf0: gpf0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf1: gpf1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf2: gpf2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - uart0_data: uart0-data { - samsung,pins = "gpa0-0", "gpa0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart0_fctl: uart0-fctl { - samsung,pins = "gpa0-2", "gpa0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart1_data: uart1-data { - samsung,pins = "gpa0-4", "gpa0-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart1_fctl: uart1-fctl { - samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart2_data: uart2-data { - samsung,pins = "gpa1-0", "gpa1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart2_fctl: uart2-fctl { - samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - uart3_data: uart3-data { - samsung,pins = "gpa1-4", "gpa1-5"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c2_bus: i2c2-bus { - samsung,pins = "gpa0-6", "gpa0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c3_bus: i2c3-bus { - samsung,pins = "gpa1-2", "gpa1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - spi0_bus: spi0-bus { - samsung,pins = "gpb-0", "gpb-2", "gpb-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c4_bus: i2c4-bus { - samsung,pins = "gpb-0", "gpb-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - spi1_bus: spi1-bus { - samsung,pins = "gpb-4", "gpb-6", "gpb-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c5_bus: i2c5-bus { - samsung,pins = "gpb-2", "gpb-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2s1_bus: i2s1-bus { - samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", - "gpc0-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2s2_bus: i2s2-bus { - samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", - "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pcm2_bus: pcm2-bus { - samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", - "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c6_bus: i2c6-bus { - samsung,pins = "gpc1-3", "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_4>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - spi2_bus: spi2-bus { - samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4"; - samsung,pin-function = <EXYNOS_PIN_FUNC_5>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pwm0_out: pwm0-out { - samsung,pins = "gpd0-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pwm1_out: pwm1-out { - samsung,pins = "gpd0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pwm2_out: pwm2-out { - samsung,pins = "gpd0-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - pwm3_out: pwm3-out { - samsung,pins = "gpd0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c7_bus: i2c7-bus { - samsung,pins = "gpd0-2", "gpd0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c0_bus: i2c0-bus { - samsung,pins = "gpd1-0", "gpd1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - i2c1_bus: i2c1-bus { - samsung,pins = "gpd1-2", "gpd1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; -}; - -&pinctrl_1 { - gpk0: gpk0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpk1: gpk1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpk2: gpk2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpk3: gpk3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpl0: gpl0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpm0: gpm0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpm1: gpm1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpm2: gpm2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpm3: gpm3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpm4: gpm4 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpx0: gpx0 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - interrupt-parent = <&gic>; - interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>, - <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>; - #interrupt-cells = <2>; - }; - - gpx1: gpx1 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - interrupt-parent = <&gic>; - interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>, - <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>; - #interrupt-cells = <2>; - }; - - gpx2: gpx2 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpx3: gpx3 { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - sd0_clk: sd0-clk { - samsung,pins = "gpk0-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_cmd: sd0-cmd { - samsung,pins = "gpk0-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_cd: sd0-cd { - samsung,pins = "gpk0-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_rdqs: sd0-rdqs { - samsung,pins = "gpk0-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_bus1: sd0-bus-width1 { - samsung,pins = "gpk0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_bus4: sd0-bus-width4 { - samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd0_bus8: sd0-bus-width8 { - samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_clk: sd1-clk { - samsung,pins = "gpk1-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_cmd: sd1-cmd { - samsung,pins = "gpk1-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_cd: sd1-cd { - samsung,pins = "gpk1-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_bus1: sd1-bus-width1 { - samsung,pins = "gpk1-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd1_bus4: sd1-bus-width4 { - samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_clk: sd2-clk { - samsung,pins = "gpk2-0"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_cmd: sd2-cmd { - samsung,pins = "gpk2-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_cd: sd2-cd { - samsung,pins = "gpk2-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_bus1: sd2-bus-width1 { - samsung,pins = "gpk2-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - sd2_bus4: sd2-bus-width4 { - samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - cam_port_b_io: cam-port-b-io { - samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", - "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", - "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - cam_port_b_clk_active: cam-port-b-clk-active { - samsung,pins = "gpm2-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; - }; - - cam_port_b_clk_idle: cam-port-b-clk-idle { - samsung,pins = "gpm2-2"; - samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - fimc_is_i2c0: fimc-is-i2c0 { - samsung,pins = "gpm4-0", "gpm4-1"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - fimc_is_i2c1: fimc-is-i2c1 { - samsung,pins = "gpm4-2", "gpm4-3"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; - - fimc_is_uart: fimc-is-uart { - samsung,pins = "gpm3-5", "gpm3-7"; - samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; -}; - -&pinctrl_2 { - gpz: gpz { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - i2s0_bus: i2s0-bus { - samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", - "gpz-4", "gpz-5", "gpz-6"; - samsung,pin-function = <EXYNOS_PIN_FUNC_2>; - samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>; - samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; - }; -}; diff --git a/dts/src/arm/exynos4415.dtsi b/dts/src/arm/exynos4415.dtsi deleted file mode 100644 index 3c40f8a956..0000000000 --- a/dts/src/arm/exynos4415.dtsi +++ /dev/null @@ -1,650 +0,0 @@ -/* - * Samsung's Exynos4415 SoC device tree source - * - * Copyright (c) 2014 Samsung Electronics Co., Ltd. - * - * Samsung's Exynos4415 SoC device nodes are listed in this file. Exynos4415 - * based board files can include this file and provide values for board - * specific bindings. - * - * Note: This file does not include device nodes for all the controllers in - * Exynos4415 SoC. As device tree coverage for Exynos4415 increases, additional - * nodes can be added to this file. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <dt-bindings/clock/exynos4415.h> -#include <dt-bindings/clock/exynos-audss-clk.h> - -/ { - compatible = "samsung,exynos4415"; - interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - pinctrl0 = &pinctrl_0; - pinctrl1 = &pinctrl_1; - pinctrl2 = &pinctrl_2; - mshc0 = &mshc_0; - mshc1 = &mshc_1; - mshc2 = &mshc_2; - spi0 = &spi_0; - spi1 = &spi_1; - spi2 = &spi_2; - i2c0 = &i2c_0; - i2c1 = &i2c_1; - i2c2 = &i2c_2; - i2c3 = &i2c_3; - i2c4 = &i2c_4; - i2c5 = &i2c_5; - i2c6 = &i2c_6; - i2c7 = &i2c_7; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@a00 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0xa00>; - clock-frequency = <1600000000>; - }; - - cpu1: cpu@a01 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0xa01>; - clock-frequency = <1600000000>; - }; - - cpu2: cpu@a02 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0xa02>; - clock-frequency = <1600000000>; - }; - - cpu3: cpu@a03 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0xa03>; - clock-frequency = <1600000000>; - }; - }; - - soc: soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - sysram@02020000 { - compatible = "mmio-sram"; - reg = <0x02020000 0x50000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x02020000 0x50000>; - - smp-sysram@0 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x0 0x1000>; - }; - - smp-sysram@4f000 { - compatible = "samsung,exynos4210-sysram-ns"; - reg = <0x4f000 0x1000>; - }; - }; - - pinctrl_2: pinctrl@03860000 { - compatible = "samsung,exynos4415-pinctrl"; - reg = <0x03860000 0x1000>; - interrupts = <0 242 0>; - }; - - chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; - reg = <0x10000000 0x100>; - }; - - sysreg_system_controller: syscon@10010000 { - compatible = "samsung,exynos4-sysreg", "syscon"; - reg = <0x10010000 0x400>; - }; - - pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos4415-pmu", "syscon"; - reg = <0x10020000 0x4000>; - }; - - mipi_phy: video-phy@10020710 { - compatible = "samsung,s5pv210-mipi-video-phy"; - #phy-cells = <1>; - syscon = <&pmu_system_controller>; - }; - - pd_cam: cam-power-domain@10024000 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10024000 0x20>; - #power-domain-cells = <0>; - }; - - pd_tv: tv-power-domain@10024020 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10024020 0x20>; - #power-domain-cells = <0>; - }; - - pd_mfc: mfc-power-domain@10024040 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10024040 0x20>; - #power-domain-cells = <0>; - }; - - pd_g3d: g3d-power-domain@10024060 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10024060 0x20>; - #power-domain-cells = <0>; - }; - - pd_lcd0: lcd0-power-domain@10024080 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10024080 0x20>; - #power-domain-cells = <0>; - }; - - pd_isp0: isp0-power-domain@100240A0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x100240A0 0x20>; - #power-domain-cells = <0>; - }; - - pd_isp1: isp1-power-domain@100240E0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x100240E0 0x20>; - #power-domain-cells = <0>; - }; - - cmu: clock-controller@10030000 { - compatible = "samsung,exynos4415-cmu"; - reg = <0x10030000 0x18000>; - #clock-cells = <1>; - }; - - rtc: rtc@10070000 { - compatible = "samsung,s3c6410-rtc"; - reg = <0x10070000 0x100>; - interrupts = <0 73 0>, <0 74 0>; - status = "disabled"; - }; - - mct@10050000 { - compatible = "samsung,exynos4210-mct"; - reg = <0x10050000 0x800>; - interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>, - <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>; - clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>; - clock-names = "fin_pll", "mct"; - }; - - gic: interrupt-controller@10481000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, - <0x10484000 0x2000>, - <0x10486000 0x2000>; - interrupts = <1 9 0xf04>; - }; - - l2c: l2-cache-controller@10502000 { - compatible = "arm,pl310-cache"; - reg = <0x10502000 0x1000>; - cache-unified; - cache-level = <2>; - arm,tag-latency = <2 2 1>; - arm,data-latency = <3 2 1>; - arm,double-linefill = <1>; - arm,double-linefill-incr = <0>; - arm,double-linefill-wrap = <1>; - arm,prefetch-drop = <1>; - arm,prefetch-offset = <7>; - }; - - cmu_dmc: clock-controller@105C0000 { - compatible = "samsung,exynos4415-cmu-dmc"; - reg = <0x105C0000 0x3000>; - #clock-cells = <1>; - }; - - pinctrl_1: pinctrl@11000000 { - compatible = "samsung,exynos4415-pinctrl"; - reg = <0x11000000 0x1000>; - interrupts = <0 225 0>; - - wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; - interrupt-parent = <&gic>; - interrupts = <0 48 0>; - }; - }; - - pinctrl_0: pinctrl@11400000 { - compatible = "samsung,exynos4415-pinctrl"; - reg = <0x11400000 0x1000>; - interrupts = <0 240 0>; - }; - - fimd: fimd@11C00000 { - compatible = "samsung,exynos4415-fimd"; - reg = <0x11C00000 0x30000>; - interrupt-names = "fifo", "vsync", "lcd_sys"; - interrupts = <0 84 0>, <0 85 0>, <0 86 0>; - clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>; - clock-names = "sclk_fimd", "fimd"; - samsung,power-domain = <&pd_lcd0>; - iommus = <&sysmmu_fimd0>; - samsung,sysreg = <&sysreg_system_controller>; - status = "disabled"; - }; - - dsi_0: dsi@11C80000 { - compatible = "samsung,exynos4415-mipi-dsi"; - reg = <0x11C80000 0x10000>; - interrupts = <0 83 0>; - samsung,phy-type = <0>; - samsung,power-domain = <&pd_lcd0>; - phys = <&mipi_phy 1>; - phy-names = "dsim"; - clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>; - clock-names = "bus_clk", "pll_clk"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - sysmmu_fimd0: sysmmu@11E20000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11e20000 0x1000>; - interrupts = <0 80 0>, <0 81 0>; - clock-names = "sysmmu", "master"; - clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>; - power-domains = <&pd_lcd0>; - #iommu-cells = <0>; - }; - - hsotg: hsotg@12480000 { - compatible = "samsung,s3c6400-hsotg"; - reg = <0x12480000 0x20000>; - interrupts = <0 141 0>; - clocks = <&cmu CLK_USBDEVICE>; - clock-names = "otg"; - phys = <&exynos_usbphy 0>; - phy-names = "usb2-phy"; - status = "disabled"; - }; - - mshc_0: mshc@12510000 { - compatible = "samsung,exynos5250-dw-mshc"; - reg = <0x12510000 0x1000>; - interrupts = <0 142 0>; - clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>; - clock-names = "biu", "ciu"; - fifo-depth = <0x80>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - mshc_1: mshc@12520000 { - compatible = "samsung,exynos5250-dw-mshc"; - reg = <0x12520000 0x1000>; - interrupts = <0 143 0>; - clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>; - clock-names = "biu", "ciu"; - fifo-depth = <0x80>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - mshc_2: mshc@12530000 { - compatible = "samsung,exynos5250-dw-mshc"; - reg = <0x12530000 0x1000>; - interrupts = <0 144 0>; - clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>; - clock-names = "biu", "ciu"; - fifo-depth = <0x80>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - ehci: ehci@12580000 { - compatible = "samsung,exynos4210-ehci"; - reg = <0x12580000 0x100>; - interrupts = <0 140 0>; - clocks = <&cmu CLK_USBHOST>; - clock-names = "usbhost"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&exynos_usbphy 1>; - status = "disabled"; - }; - port@1 { - reg = <1>; - phys = <&exynos_usbphy 2>; - status = "disabled"; - }; - port@2 { - reg = <2>; - phys = <&exynos_usbphy 3>; - status = "disabled"; - }; - }; - - ohci: ohci@12590000 { - compatible = "samsung,exynos4210-ohci"; - reg = <0x12590000 0x100>; - interrupts = <0 140 0>; - clocks = <&cmu CLK_USBHOST>; - clock-names = "usbhost"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&exynos_usbphy 1>; - status = "disabled"; - }; - }; - - exynos_usbphy: exynos-usbphy@125B0000 { - compatible = "samsung,exynos4x12-usb2-phy"; - reg = <0x125B0000 0x100>; - samsung,pmureg-phandle = <&pmu_system_controller>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - clocks = <&cmu CLK_USBDEVICE>, <&xusbxti>; - clock-names = "phy", "ref"; - #phy-cells = <1>; - status = "disabled"; - }; - - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&gic>; - ranges; - - pdma0: pdma@12680000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12680000 0x1000>; - interrupts = <0 138 0>; - clocks = <&cmu CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@12690000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12690000 0x1000>; - interrupts = <0 139 0>; - clocks = <&cmu CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - }; - - adc: adc@126C0000 { - compatible = "samsung,exynos3250-adc", - "samsung,exynos-adc-v2"; - reg = <0x126C0000 0x100>, <0x10020718 0x4>; - interrupts = <0 137 0>; - clock-names = "adc", "sclk"; - clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; - #io-channel-cells = <1>; - io-channel-ranges; - status = "disabled"; - }; - - serial_0: serial@13800000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13800000 0x100>; - interrupts = <0 109 0>; - clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; - }; - - serial_1: serial@13810000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13810000 0x100>; - interrupts = <0 110 0>; - clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; - }; - - serial_2: serial@13820000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13820000 0x100>; - interrupts = <0 111 0>; - clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; - }; - - serial_3: serial@13830000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13830000 0x100>; - interrupts = <0 112 0>; - clocks = <&cmu CLK_UART3>, <&cmu CLK_SCLK_UART3>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; - }; - - i2c_0: i2c@13860000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x13860000 0x100>; - interrupts = <0 113 0>; - clocks = <&cmu CLK_I2C0>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_bus>; - status = "disabled"; - }; - - i2c_1: i2c@13870000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x13870000 0x100>; - interrupts = <0 114 0>; - clocks = <&cmu CLK_I2C1>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_bus>; - status = "disabled"; - }; - - i2c_2: i2c@13880000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x13880000 0x100>; - interrupts = <0 115 0>; - clocks = <&cmu CLK_I2C2>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_bus>; - status = "disabled"; - }; - - i2c_3: i2c@13890000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x13890000 0x100>; - interrupts = <0 116 0>; - clocks = <&cmu CLK_I2C3>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_bus>; - status = "disabled"; - }; - - i2c_4: i2c@138A0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x138A0000 0x100>; - interrupts = <0 117 0>; - clocks = <&cmu CLK_I2C4>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_bus>; - status = "disabled"; - }; - - i2c_5: i2c@138B0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x138B0000 0x100>; - interrupts = <0 118 0>; - clocks = <&cmu CLK_I2C5>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_bus>; - status = "disabled"; - }; - - i2c_6: i2c@138C0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x138C0000 0x100>; - interrupts = <0 119 0>; - clocks = <&cmu CLK_I2C6>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_bus>; - status = "disabled"; - }; - - i2c_7: i2c@138D0000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "samsung,s3c2440-i2c"; - reg = <0x138D0000 0x100>; - interrupts = <0 120 0>; - clocks = <&cmu CLK_I2C7>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c7_bus>; - status = "disabled"; - }; - - spi_0: spi@13920000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x13920000 0x100>; - interrupts = <0 121 0>; - dmas = <&pdma0 7>, <&pdma0 6>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>; - clock-names = "spi", "spi_busclk0"; - samsung,spi-src-clk = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_bus>; - status = "disabled"; - }; - - spi_1: spi@13930000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x13930000 0x100>; - interrupts = <0 122 0>; - dmas = <&pdma1 7>, <&pdma1 6>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>; - clock-names = "spi", "spi_busclk0"; - samsung,spi-src-clk = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_bus>; - status = "disabled"; - }; - - spi_2: spi@13940000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x13940000 0x100>; - interrupts = <0 123 0>; - dmas = <&pdma0 9>, <&pdma0 8>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cmu CLK_SPI2>, <&cmu CLK_SCLK_SPI2>; - clock-names = "spi", "spi_busclk0"; - samsung,spi-src-clk = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_bus>; - status = "disabled"; - }; - - clock_audss: clock-controller@03810000 { - compatible = "samsung,exynos4210-audss-clock"; - reg = <0x03810000 0x0C>; - #clock-cells = <1>; - }; - - i2s0: i2s@3830000 { - compatible = "samsung,s5pv210-i2s"; - reg = <0x03830000 0x100>; - interrupts = <0 124 0>; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0"; - dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 8>; - dma-names = "tx", "rx", "tx-sec"; - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_bus>; - samsung,idma-addr = <0x03000000>; - status = "disabled"; - }; - - pwm: pwm@139D0000 { - compatible = "samsung,exynos4210-pwm"; - reg = <0x139D0000 0x1000>; - interrupts = <0 104 0>, <0 105 0>, <0 106 0>, - <0 107 0>, <0 108 0>; - #pwm-cells = <3>; - status = "disabled"; - }; - - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupts = <0 18 0>, <0 19 0>, <0 20 0>, <0 21 0>; - }; - }; -}; - -#include "exynos4415-pinctrl.dtsi" diff --git a/dts/src/arm/exynos4x12-pinctrl.dtsi b/dts/src/arm/exynos4x12-pinctrl.dtsi index a56bf9b1a4..2f866f6e58 100644 --- a/dts/src/arm/exynos4x12-pinctrl.dtsi +++ b/dts/src/arm/exynos4x12-pinctrl.dtsi @@ -572,8 +572,14 @@ interrupt-controller; interrupt-parent = <&gic>; - interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; }; @@ -583,8 +589,14 @@ interrupt-controller; interrupt-parent = <&gic>; - interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; }; diff --git a/dts/src/arm/exynos4x12.dtsi b/dts/src/arm/exynos4x12.dtsi index 3394bdcf10..85a7122658 100644 --- a/dts/src/arm/exynos4x12.dtsi +++ b/dts/src/arm/exynos4x12.dtsi @@ -88,11 +88,11 @@ #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = <0 &gic 0 57 0>, + interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>, <1 &combiner 12 5>, <2 &combiner 12 6>, <3 &combiner 12 7>, - <4 &gic 1 12 0>; + <4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -112,7 +112,7 @@ g2d: g2d@10800000 { compatible = "samsung,exynos4212-g2d"; reg = <0x10800000 0x1000>; - interrupts = <0 89 0>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; clock-names = "sclk_fimg2d", "fimg2d"; iommus = <&sysmmu_g2d>; @@ -127,7 +127,7 @@ fimc_lite_0: fimc-lite@12390000 { compatible = "samsung,exynos4212-fimc-lite"; reg = <0x12390000 0x1000>; - interrupts = <0 105 0>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_isp>; clocks = <&clock CLK_FIMC_LITE0>; clock-names = "flite"; @@ -138,7 +138,7 @@ fimc_lite_1: fimc-lite@123A0000 { compatible = "samsung,exynos4212-fimc-lite"; reg = <0x123A0000 0x1000>; - interrupts = <0 106 0>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_isp>; clocks = <&clock CLK_FIMC_LITE1>; clock-names = "flite"; @@ -147,9 +147,10 @@ }; fimc_is: fimc-is@12000000 { - compatible = "samsung,exynos4212-fimc-is", "simple-bus"; + compatible = "samsung,exynos4212-fimc-is"; reg = <0x12000000 0x260000>; - interrupts = <0 90 0>, <0 95 0>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_isp>; clocks = <&clock CLK_FIMC_LITE0>, <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>, @@ -200,7 +201,7 @@ mshc_0: mmc@12550000 { compatible = "samsung,exynos4412-dw-mshc"; reg = <0x12550000 0x1000>; - interrupts = <0 77 0>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; fifo-depth = <0x80>; @@ -461,11 +462,26 @@ }; &combiner { - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; }; &exynos_usbphy { @@ -529,18 +545,18 @@ &pinctrl_0 { compatible = "samsung,exynos4x12-pinctrl"; reg = <0x11400000 0x1000>; - interrupts = <0 47 0>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; }; &pinctrl_1 { compatible = "samsung,exynos4x12-pinctrl"; reg = <0x11000000 0x1000>; - interrupts = <0 46 0>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; wakup_eint: wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <0 32 0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -554,7 +570,7 @@ &pinctrl_3 { compatible = "samsung,exynos4x12-pinctrl"; reg = <0x106E0000 0x1000>; - interrupts = <0 72 0>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; }; &pmu_system_controller { diff --git a/dts/src/arm/exynos5.dtsi b/dts/src/arm/exynos5.dtsi index 8f06609879..7fd870ee50 100644 --- a/dts/src/arm/exynos5.dtsi +++ b/dts/src/arm/exynos5.dtsi @@ -13,6 +13,8 @@ * published by the Free Software Foundation. */ +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> #include "exynos-syscon-restart.dtsi" / { @@ -53,14 +55,38 @@ interrupt-controller; samsung,combiner-nr = <32>; reg = <0x10440000 0x1000>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>, + <0 4 IRQ_TYPE_LEVEL_HIGH>, + <0 5 IRQ_TYPE_LEVEL_HIGH>, + <0 6 IRQ_TYPE_LEVEL_HIGH>, + <0 7 IRQ_TYPE_LEVEL_HIGH>, + <0 8 IRQ_TYPE_LEVEL_HIGH>, + <0 9 IRQ_TYPE_LEVEL_HIGH>, + <0 10 IRQ_TYPE_LEVEL_HIGH>, + <0 11 IRQ_TYPE_LEVEL_HIGH>, + <0 12 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 IRQ_TYPE_LEVEL_HIGH>, + <0 16 IRQ_TYPE_LEVEL_HIGH>, + <0 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 IRQ_TYPE_LEVEL_HIGH>, + <0 19 IRQ_TYPE_LEVEL_HIGH>, + <0 20 IRQ_TYPE_LEVEL_HIGH>, + <0 21 IRQ_TYPE_LEVEL_HIGH>, + <0 22 IRQ_TYPE_LEVEL_HIGH>, + <0 23 IRQ_TYPE_LEVEL_HIGH>, + <0 24 IRQ_TYPE_LEVEL_HIGH>, + <0 25 IRQ_TYPE_LEVEL_HIGH>, + <0 26 IRQ_TYPE_LEVEL_HIGH>, + <0 27 IRQ_TYPE_LEVEL_HIGH>, + <0 28 IRQ_TYPE_LEVEL_HIGH>, + <0 29 IRQ_TYPE_LEVEL_HIGH>, + <0 30 IRQ_TYPE_LEVEL_HIGH>, + <0 31 IRQ_TYPE_LEVEL_HIGH>; }; gic: interrupt-controller@10481000 { @@ -71,7 +97,8 @@ <0x10482000 0x1000>, <0x10484000 0x2000>, <0x10486000 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; sysreg_system_controller: syscon@10050000 { @@ -82,31 +109,31 @@ serial_0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; - interrupts = <0 51 0>; + interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; }; serial_1: serial@12C10000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C10000 0x100>; - interrupts = <0 52 0>; + interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; }; serial_2: serial@12C20000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C20000 0x100>; - interrupts = <0 53 0>; + interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>; }; serial_3: serial@12C30000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C30000 0x100>; - interrupts = <0 54 0>; + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>; }; i2c_0: i2c@12C60000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C60000 0x100>; - interrupts = <0 56 0>; + interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -116,7 +143,7 @@ i2c_1: i2c@12C70000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C70000 0x100>; - interrupts = <0 57 0>; + interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -126,7 +153,7 @@ i2c_2: i2c@12C80000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C80000 0x100>; - interrupts = <0 58 0>; + interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -136,7 +163,7 @@ i2c_3: i2c@12C90000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C90000 0x100>; - interrupts = <0 59 0>; + interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,sysreg-phandle = <&sysreg_system_controller>; @@ -153,7 +180,8 @@ rtc: rtc@101E0000 { compatible = "samsung,s3c6410-rtc"; reg = <0x101E0000 0x100>; - interrupts = <0 43 0>, <0 44 0>; + interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>, + <0 44 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; diff --git a/dts/src/arm/exynos5250-snow-common.dtsi b/dts/src/arm/exynos5250-snow-common.dtsi index d5d51916bb..8f3a804307 100644 --- a/dts/src/arm/exynos5250-snow-common.dtsi +++ b/dts/src/arm/exynos5250-snow-common.dtsi @@ -523,6 +523,7 @@ status = "okay"; }; +/* eMMC flash */ &mmc_0 { status = "okay"; num-slots = <1>; @@ -536,6 +537,7 @@ cap-mmc-highspeed; }; +/* uSD card */ &mmc_2 { status = "okay"; num-slots = <1>; @@ -553,6 +555,8 @@ /* * On Snow we've got SIP WiFi and so can keep drive strengths low to * reduce EMI. + * + * WiFi SDIO module */ &mmc_3 { status = "okay"; diff --git a/dts/src/arm/exynos5250.dtsi b/dts/src/arm/exynos5250.dtsi index f7357d99b4..b6d7444d85 100644 --- a/dts/src/arm/exynos5250.dtsi +++ b/dts/src/arm/exynos5250.dtsi @@ -181,8 +181,8 @@ <0x1 0 &combiner 23 4>, <0x2 0 &combiner 25 2>, <0x3 0 &combiner 25 3>, - <0x4 0 &gic 0 120 0>, - <0x5 0 &gic 0 121 0>; + <0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>, + <0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>; }; }; @@ -195,31 +195,31 @@ pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos5250-pinctrl"; reg = <0x11400000 0x1000>; - interrupts = <0 46 0>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; wakup_eint: wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <0 32 0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; }; pinctrl_1: pinctrl@13400000 { compatible = "samsung,exynos5250-pinctrl"; reg = <0x13400000 0x1000>; - interrupts = <0 45 0>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_2: pinctrl@10d10000 { compatible = "samsung,exynos5250-pinctrl"; reg = <0x10d10000 0x1000>; - interrupts = <0 50 0>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_3: pinctrl@03860000 { compatible = "samsung,exynos5250-pinctrl"; reg = <0x03860000 0x1000>; - interrupts = <0 47 0>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; }; pmu_system_controller: system-controller@10040000 { @@ -236,7 +236,7 @@ watchdog@101D0000 { compatible = "samsung,exynos5250-wdt"; reg = <0x101D0000 0x100>; - interrupts = <0 42 0>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_WDT>; clock-names = "watchdog"; samsung,syscon-phandle = <&pmu_system_controller>; @@ -245,7 +245,7 @@ g2d@10850000 { compatible = "samsung,exynos5250-g2d"; reg = <0x10850000 0x1000>; - interrupts = <0 91 0>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_G2D>; clock-names = "fimg2d"; iommus = <&sysmmu_g2d>; @@ -254,7 +254,7 @@ mfc: codec@11000000 { compatible = "samsung,mfc-v6"; reg = <0x11000000 0x10000>; - interrupts = <0 96 0>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_mfc>; clocks = <&clock CLK_MFC>; clock-names = "mfc"; @@ -265,7 +265,7 @@ rotator: rotator@11C00000 { compatible = "samsung,exynos5250-rotator"; reg = <0x11C00000 0x64>; - interrupts = <0 84 0>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_ROTATOR>; clock-names = "rotator"; iommus = <&sysmmu_rotator>; @@ -274,7 +274,7 @@ tmu: tmu@10060000 { compatible = "samsung,exynos5250-tmu"; reg = <0x10060000 0x100>; - interrupts = <0 65 0>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -284,7 +284,7 @@ compatible = "snps,dwc-ahci"; samsung,sata-freq = <66>; reg = <0x122F0000 0x1ff>; - interrupts = <0 115 0>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>; clock-names = "sata", "sclk_sata"; phys = <&sata_phy>; @@ -306,7 +306,7 @@ i2c_4: i2c@12CA0000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12CA0000 0x100>; - interrupts = <0 60 0>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_I2C4>; @@ -319,7 +319,7 @@ i2c_5: i2c@12CB0000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12CB0000 0x100>; - interrupts = <0 61 0>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_I2C5>; @@ -332,7 +332,7 @@ i2c_6: i2c@12CC0000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12CC0000 0x100>; - interrupts = <0 62 0>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_I2C6>; @@ -345,7 +345,7 @@ i2c_7: i2c@12CD0000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12CD0000 0x100>; - interrupts = <0 63 0>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_I2C7>; @@ -358,7 +358,7 @@ i2c_8: i2c@12CE0000 { compatible = "samsung,s3c2440-hdmiphy-i2c"; reg = <0x12CE0000 0x1000>; - interrupts = <0 64 0>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_I2C_HDMI>; @@ -380,7 +380,7 @@ compatible = "samsung,exynos4210-spi"; status = "disabled"; reg = <0x12d20000 0x100>; - interrupts = <0 66 0>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma0 5 &pdma0 4>; dma-names = "tx", "rx"; @@ -396,7 +396,7 @@ compatible = "samsung,exynos4210-spi"; status = "disabled"; reg = <0x12d30000 0x100>; - interrupts = <0 67 0>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma1 5 &pdma1 4>; dma-names = "tx", "rx"; @@ -412,7 +412,7 @@ compatible = "samsung,exynos4210-spi"; status = "disabled"; reg = <0x12d40000 0x100>; - interrupts = <0 68 0>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma0 7 &pdma0 6>; dma-names = "tx", "rx"; @@ -426,7 +426,7 @@ mmc_0: mmc@12200000 { compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 75 0>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x12200000 0x1000>; @@ -438,7 +438,7 @@ mmc_1: mmc@12210000 { compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 76 0>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x12210000 0x1000>; @@ -450,7 +450,7 @@ mmc_2: mmc@12220000 { compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 77 0>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x12220000 0x1000>; @@ -463,7 +463,7 @@ mmc_3: mmc@12230000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12230000 0x1000>; - interrupts = <0 78 0>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>; @@ -526,7 +526,7 @@ usbdrd_dwc3: dwc3@12000000 { compatible = "synopsys,dwc3"; reg = <0x12000000 0x10000>; - interrupts = <0 72 0>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; phy-names = "usb2-phy", "usb3-phy"; }; @@ -544,7 +544,7 @@ ehci: usb@12110000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12110000 0x100>; - interrupts = <0 71 0>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_USB2>; clock-names = "usbhost"; @@ -559,7 +559,7 @@ ohci: usb@12120000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12120000 0x100>; - interrupts = <0 71 0>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_USB2>; clock-names = "usbhost"; @@ -591,7 +591,7 @@ pdma0: pdma@121A0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121A0000 0x1000>; - interrupts = <0 34 0>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -602,7 +602,7 @@ pdma1: pdma@121B0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121B0000 0x1000>; - interrupts = <0 35 0>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -613,7 +613,7 @@ mdma0: mdma@10800000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10800000 0x1000>; - interrupts = <0 33 0>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -624,7 +624,7 @@ mdma1: mdma@11C10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x11C10000 0x1000>; - interrupts = <0 124 0>; + interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -636,7 +636,7 @@ gsc_0: gsc@13e00000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; - interrupts = <0 85 0>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; @@ -646,7 +646,7 @@ gsc_1: gsc@13e10000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; - interrupts = <0 86 0>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; @@ -656,7 +656,7 @@ gsc_2: gsc@13e20000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e20000 0x1000>; - interrupts = <0 87 0>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL2>; clock-names = "gscl"; @@ -666,7 +666,7 @@ gsc_3: gsc@13e30000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e30000 0x1000>; - interrupts = <0 88 0>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL3>; clock-names = "gscl"; @@ -677,7 +677,7 @@ compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; power-domains = <&pd_disp1>; - interrupts = <0 95 0>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, <&clock CLK_MOUT_HDMI>; @@ -690,7 +690,7 @@ compatible = "samsung,exynos5250-mixer"; reg = <0x14450000 0x10000>; power-domains = <&pd_disp1>; - interrupts = <0 94 0>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>; clock-names = "mixer", "hdmi", "sclk_hdmi"; @@ -706,7 +706,7 @@ adc: adc@12D10000 { compatible = "samsung,exynos-adc-v1"; reg = <0x12D10000 0x100>; - interrupts = <0 106 0>; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_ADC>; clock-names = "adc"; #io-channel-cells = <1>; @@ -718,7 +718,7 @@ sss@10830000 { compatible = "samsung,exynos4210-secss"; reg = <0x10830000 0x300>; - interrupts = <0 112 0>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SSS>; clock-names = "secss"; }; diff --git a/dts/src/arm/exynos5260.dtsi b/dts/src/arm/exynos5260.dtsi index a86a4898d0..5818718618 100644 --- a/dts/src/arm/exynos5260.dtsi +++ b/dts/src/arm/exynos5260.dtsi @@ -10,6 +10,8 @@ */ #include <dt-bindings/clock/exynos5260-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> / { compatible = "samsung,exynos5260", "samsung,exynos5"; @@ -168,7 +170,8 @@ <0x10482000 0x1000>, <0x10484000 0x2000>, <0x10486000 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; chipid: chipid@10000000 { @@ -181,10 +184,18 @@ reg = <0x100B0000 0x1000>; clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>; clock-names = "fin_pll", "mct"; - interrupts = <0 104 0>, <0 105 0>, <0 106 0>, - <0 107 0>, <0 122 0>, <0 123 0>, - <0 124 0>, <0 125 0>, <0 126 0>, - <0 127 0>, <0 128 0>, <0 129 0>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>; }; cci: cci@10F00000 { @@ -210,25 +221,25 @@ pinctrl_0: pinctrl@11600000 { compatible = "samsung,exynos5260-pinctrl"; reg = <0x11600000 0x1000>; - interrupts = <0 79 0>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <0 32 0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; }; pinctrl_1: pinctrl@12290000 { compatible = "samsung,exynos5260-pinctrl"; reg = <0x12290000 0x1000>; - interrupts = <0 157 0>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_2: pinctrl@128B0000 { compatible = "samsung,exynos5260-pinctrl"; reg = <0x128B0000 0x1000>; - interrupts = <0 243 0>; + interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; }; pmu_system_controller: system-controller@10D50000 { @@ -239,7 +250,7 @@ uart0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; - interrupts = <0 146 0>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; status = "disabled"; @@ -248,7 +259,7 @@ uart1: serial@12C10000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C10000 0x100>; - interrupts = <0 147 0>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; status = "disabled"; @@ -257,7 +268,7 @@ uart2: serial@12C20000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C20000 0x100>; - interrupts = <0 148 0>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; status = "disabled"; @@ -266,7 +277,7 @@ uart3: serial@12860000 { compatible = "samsung,exynos4210-uart"; reg = <0x12860000 0x100>; - interrupts = <0 145 0>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>; clock-names = "uart", "clk_uart_baud0"; status = "disabled"; @@ -275,7 +286,7 @@ mmc_0: mmc@12140000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12140000 0x2000>; - interrupts = <0 156 0>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>; @@ -287,7 +298,7 @@ mmc_1: mmc@12150000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12150000 0x2000>; - interrupts = <0 158 0>; + interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>; @@ -299,7 +310,7 @@ mmc_2: mmc@12160000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12160000 0x2000>; - interrupts = <0 159 0>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>; diff --git a/dts/src/arm/exynos5410-odroidxu.dts b/dts/src/arm/exynos5410-odroidxu.dts index 3c271cb4b2..c4de1353e5 100644 --- a/dts/src/arm/exynos5410-odroidxu.dts +++ b/dts/src/arm/exynos5410-odroidxu.dts @@ -15,6 +15,7 @@ #include <dt-bindings/clock/maxim,max77802.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/sound/samsung-i2s.h> #include "exynos54xx-odroidxu-leds.dtsi" / { @@ -57,6 +58,61 @@ compatible = "samsung,secure-firmware"; reg = <0x02073000 0x1000>; }; + + sound: sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "Odroid-XU"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Speakers", "Speakers"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Headphone Jack", "MICBIAS", + "IN1", "Headphone Jack", + "Speakers", "SPKL", + "Speakers", "SPKR"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + + simple-audio-card,cpu { + sound-dai = <&audi2s0 0>; + system-clock-frequency = <19200000>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&max98090>; + clocks = <&audi2s0 CLK_I2S_CDCLK>; + }; + }; +}; + +&audi2s0 { + status = "okay"; +}; + +&clock { + clocks = <&fin_pll>; + assigned-clocks = <&clock CLK_FOUT_EPLL>; + assigned-clock-rates = <192000000>; +}; + +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_SRP>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + + assigned-clock-parents = <&clock CLK_FOUT_EPLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + + assigned-clock-rates = <0>, + <0>, + <96000000>, + <19200000>; }; &cpu0_thermal { @@ -440,6 +496,19 @@ }; }; +&i2c_1 { + status = "okay"; + max98090: max98090@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpj3>; + interrupts = <0 IRQ_TYPE_NONE>; + clocks = <&audi2s0 CLK_I2S_CDCLK>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + &mmc_0 { status = "okay"; mmc-pwrseq = <&emmc_pwrseq>; diff --git a/dts/src/arm/exynos5410-pinctrl.dtsi b/dts/src/arm/exynos5410-pinctrl.dtsi index a083d23fde..ff46a1c271 100644 --- a/dts/src/arm/exynos5410-pinctrl.dtsi +++ b/dts/src/arm/exynos5410-pinctrl.dtsi @@ -615,4 +615,13 @@ interrupt-controller; #interrupt-cells = <2>; }; + + audi2s0_bus: audi2s0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; diff --git a/dts/src/arm/exynos5410.dtsi b/dts/src/arm/exynos5410.dtsi index 137f48464f..2b6adafe18 100644 --- a/dts/src/arm/exynos5410.dtsi +++ b/dts/src/arm/exynos5410.dtsi @@ -16,6 +16,7 @@ #include "exynos54xx.dtsi" #include "exynos-syscon-restart.dtsi" #include <dt-bindings/clock/exynos5410.h> +#include <dt-bindings/clock/exynos-audss-clk.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -82,10 +83,18 @@ #clock-cells = <1>; }; + clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5410-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock CLK_FOUT_EPLL>; + clock-names = "pll_ref", "pll_in"; + }; + tmu_cpu0: tmu@10060000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10060000 0x100>; - interrupts = <GIC_SPI 65 0>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -94,7 +103,7 @@ tmu_cpu1: tmu@10064000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10064000 0x100>; - interrupts = <GIC_SPI 183 0>; + interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -103,7 +112,7 @@ tmu_cpu2: tmu@10068000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10068000 0x100>; - interrupts = <GIC_SPI 184 0>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -112,7 +121,7 @@ tmu_cpu3: tmu@1006c000 { compatible = "samsung,exynos5420-tmu"; reg = <0x1006c000 0x100>; - interrupts = <GIC_SPI 185 0>; + interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -121,7 +130,7 @@ mmc_0: mmc@12200000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12200000 0x1000>; - interrupts = <0 75 0>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>; @@ -133,7 +142,7 @@ mmc_1: mmc@12210000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12210000 0x1000>; - interrupts = <0 76 0>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>; @@ -145,7 +154,7 @@ mmc_2: mmc@12220000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12220000 0x1000>; - interrupts = <0 77 0>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; @@ -157,31 +166,81 @@ pinctrl_0: pinctrl@13400000 { compatible = "samsung,exynos5410-pinctrl"; reg = <0x13400000 0x1000>; - interrupts = <0 45 0>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <0 32 0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; }; }; pinctrl_1: pinctrl@14000000 { compatible = "samsung,exynos5410-pinctrl"; reg = <0x14000000 0x1000>; - interrupts = <0 46 0>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_2: pinctrl@10d10000 { compatible = "samsung,exynos5410-pinctrl"; reg = <0x10d10000 0x1000>; - interrupts = <0 50 0>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_3: pinctrl@03860000 { compatible = "samsung,exynos5410-pinctrl"; reg = <0x03860000 0x1000>; - interrupts = <0 47 0>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + + audi2s0: i2s@03830000 { + compatible = "samsung,exynos5420-i2s"; + reg = <0x03830000 0x100>; + dmas = <&pdma0 10 + &pdma0 9 + &pdma0 8>; + dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk0"; + #sound-dai-cells = <1>; + samsung,idma-addr = <0x03000000>; + pinctrl-names = "default"; + pinctrl-0 = <&audi2s0_bus>; + status = "disabled"; }; }; @@ -329,7 +388,7 @@ }; &usbdrd_dwc3_1 { - interrupts = <GIC_SPI 200 0>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; }; &usbdrd_phy1 { diff --git a/dts/src/arm/exynos5420-peach-pit.dts b/dts/src/arm/exynos5420-peach-pit.dts index ec4a00f1ce..1f964ec35c 100644 --- a/dts/src/arm/exynos5420-peach-pit.dts +++ b/dts/src/arm/exynos5420-peach-pit.dts @@ -697,6 +697,7 @@ status = "okay"; }; +/* eMMC flash */ &mmc_0 { status = "okay"; num-slots = <1>; @@ -714,6 +715,7 @@ bus-width = <8>; }; +/* WiFi SDIO module */ &mmc_1 { status = "okay"; num-slots = <1>; @@ -733,6 +735,7 @@ vqmmc-supply = <&buck10_reg>; }; +/* uSD card */ &mmc_2 { status = "okay"; num-slots = <1>; diff --git a/dts/src/arm/exynos5420.dtsi b/dts/src/arm/exynos5420.dtsi index 00c4cfa548..906a1a42a7 100644 --- a/dts/src/arm/exynos5420.dtsi +++ b/dts/src/arm/exynos5420.dtsi @@ -193,7 +193,7 @@ mfc: codec@11000000 { compatible = "samsung,mfc-v7"; reg = <0x11000000 0x10000>; - interrupts = <0 96 0>; + interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MFC>; clock-names = "mfc"; power-domains = <&mfc_pd>; @@ -203,7 +203,7 @@ mmc_0: mmc@12200000 { compatible = "samsung,exynos5420-dw-mshc-smu"; - interrupts = <0 75 0>; + interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x12200000 0x2000>; @@ -215,7 +215,7 @@ mmc_1: mmc@12210000 { compatible = "samsung,exynos5420-dw-mshc-smu"; - interrupts = <0 76 0>; + interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x12210000 0x2000>; @@ -227,7 +227,7 @@ mmc_2: mmc@12220000 { compatible = "samsung,exynos5420-dw-mshc"; - interrupts = <0 77 0>; + interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x12220000 0x1000>; @@ -320,37 +320,37 @@ pinctrl_0: pinctrl@13400000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x13400000 0x1000>; - interrupts = <0 45 0>; + interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>; wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <0 32 0>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; }; }; pinctrl_1: pinctrl@13410000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x13410000 0x1000>; - interrupts = <0 78 0>; + interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_2: pinctrl@14000000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x14000000 0x1000>; - interrupts = <0 46 0>; + interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_3: pinctrl@14010000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x14010000 0x1000>; - interrupts = <0 50 0>; + interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_4: pinctrl@03860000 { compatible = "samsung,exynos5420-pinctrl"; reg = <0x03860000 0x1000>; - interrupts = <0 47 0>; + interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; }; amba { @@ -363,7 +363,7 @@ adma: adma@03880000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x03880000 0x1000>; - interrupts = <0 110 0>; + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_audss EXYNOS_ADMA>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -374,7 +374,7 @@ pdma0: pdma@121A0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121A0000 0x1000>; - interrupts = <0 34 0>; + interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -385,7 +385,7 @@ pdma1: pdma@121B0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x121B0000 0x1000>; - interrupts = <0 35 0>; + interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -396,7 +396,7 @@ mdma0: mdma@10800000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10800000 0x1000>; - interrupts = <0 33 0>; + interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -407,7 +407,7 @@ mdma1: mdma@11C10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x11C10000 0x1000>; - interrupts = <0 124 0>; + interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -479,7 +479,7 @@ spi_0: spi@12d20000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; - interrupts = <0 68 0>; + interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma0 5 &pdma0 4>; dma-names = "tx", "rx"; @@ -495,7 +495,7 @@ spi_1: spi@12d30000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d30000 0x100>; - interrupts = <0 69 0>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma1 5 &pdma1 4>; dma-names = "tx", "rx"; @@ -511,7 +511,7 @@ spi_2: spi@12d40000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d40000 0x100>; - interrupts = <0 70 0>; + interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>; dmas = <&pdma0 7 &pdma0 6>; dma-names = "tx", "rx"; @@ -539,7 +539,7 @@ dsi@14500000 { compatible = "samsung,exynos5410-mipi-dsi"; reg = <0x14500000 0x10000>; - interrupts = <0 82 0>; + interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; phys = <&mipi_phy 1>; phy-names = "dsim"; clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>; @@ -552,7 +552,7 @@ adc: adc@12D10000 { compatible = "samsung,exynos-adc-v2"; reg = <0x12D10000 0x100>; - interrupts = <0 106 0>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TSADC>; clock-names = "adc"; #io-channel-cells = <1>; @@ -564,7 +564,7 @@ hsi2c_8: i2c@12E00000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E00000 0x1000>; - interrupts = <0 87 0>; + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -577,7 +577,7 @@ hsi2c_9: i2c@12E10000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E10000 0x1000>; - interrupts = <0 88 0>; + interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -590,7 +590,7 @@ hsi2c_10: i2c@12E20000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12E20000 0x1000>; - interrupts = <0 203 0>; + interrupts = <0 203 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -603,7 +603,7 @@ hdmi: hdmi@14530000 { compatible = "samsung,exynos5420-hdmi"; reg = <0x14530000 0x70000>; - interrupts = <0 95 0>; + interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, <&clock CLK_MOUT_HDMI>; @@ -622,7 +622,7 @@ mixer: mixer@14450000 { compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; - interrupts = <0 94 0>; + interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>; clock-names = "mixer", "hdmi", "sclk_hdmi"; @@ -633,7 +633,7 @@ rotator: rotator@11C00000 { compatible = "samsung,exynos5250-rotator"; reg = <0x11C00000 0x64>; - interrupts = <0 84 0>; + interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_ROTATOR>; clock-names = "rotator"; iommus = <&sysmmu_rotator>; @@ -642,7 +642,7 @@ gsc_0: video-scaler@13e00000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e00000 0x1000>; - interrupts = <0 85 0>; + interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; power-domains = <&gsc_pd>; @@ -652,7 +652,7 @@ gsc_1: video-scaler@13e10000 { compatible = "samsung,exynos5-gsc"; reg = <0x13e10000 0x1000>; - interrupts = <0 86 0>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; power-domains = <&gsc_pd>; @@ -662,7 +662,7 @@ jpeg_0: jpeg@11F50000 { compatible = "samsung,exynos5420-jpeg"; reg = <0x11F50000 0x1000>; - interrupts = <0 89 0>; + interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; clock-names = "jpeg"; clocks = <&clock CLK_JPEG>; iommus = <&sysmmu_jpeg0>; @@ -671,7 +671,7 @@ jpeg_1: jpeg@11F60000 { compatible = "samsung,exynos5420-jpeg"; reg = <0x11F60000 0x1000>; - interrupts = <0 168 0>; + interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; clock-names = "jpeg"; clocks = <&clock CLK_JPEG2>; iommus = <&sysmmu_jpeg1>; @@ -691,7 +691,7 @@ tmu_cpu0: tmu@10060000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10060000 0x100>; - interrupts = <0 65 0>; + interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -700,7 +700,7 @@ tmu_cpu1: tmu@10064000 { compatible = "samsung,exynos5420-tmu"; reg = <0x10064000 0x100>; - interrupts = <0 183 0>; + interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>; clock-names = "tmu_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -709,7 +709,7 @@ tmu_cpu2: tmu@10068000 { compatible = "samsung,exynos5420-tmu-ext-triminfo"; reg = <0x10068000 0x100>, <0x1006c000 0x4>; - interrupts = <0 184 0>; + interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -718,7 +718,7 @@ tmu_cpu3: tmu@1006c000 { compatible = "samsung,exynos5420-tmu-ext-triminfo"; reg = <0x1006c000 0x100>, <0x100a0000 0x4>; - interrupts = <0 185 0>; + interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -727,7 +727,7 @@ tmu_gpu: tmu@100a0000 { compatible = "samsung,exynos5420-tmu-ext-triminfo"; reg = <0x100a0000 0x100>, <0x10068000 0x4>; - interrupts = <0 215 0>; + interrupts = <0 215 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; clock-names = "tmu_apbif", "tmu_triminfo_apbif"; #include "exynos4412-tmu-sensor-conf.dtsi" @@ -799,7 +799,7 @@ sysmmu_scaler1r: sysmmu@0x12890000 { compatible = "samsung,exynos-sysmmu"; reg = <0x12890000 0x1000>; - interrupts = <0 186 0>; + interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; #iommu-cells = <0>; @@ -808,7 +808,7 @@ sysmmu_scaler2r: sysmmu@0x128A0000 { compatible = "samsung,exynos-sysmmu"; reg = <0x128A0000 0x1000>; - interrupts = <0 188 0>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; #iommu-cells = <0>; @@ -867,7 +867,7 @@ sysmmu_jpeg1: sysmmu@0x11F20000 { compatible = "samsung,exynos-sysmmu"; reg = <0x11F20000 0x1000>; - interrupts = <0 169 0>; + interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; clock-names = "sysmmu", "master"; clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>; #iommu-cells = <0>; @@ -1445,7 +1445,7 @@ }; &usbdrd_dwc3_1 { - interrupts = <GIC_SPI 73 0>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; }; &usbdrd_phy1 { diff --git a/dts/src/arm/exynos5422-odroidxu3-common.dtsi b/dts/src/arm/exynos5422-odroidxu3-common.dtsi index 246d298557..05b9afdd67 100644 --- a/dts/src/arm/exynos5422-odroidxu3-common.dtsi +++ b/dts/src/arm/exynos5422-odroidxu3-common.dtsi @@ -147,6 +147,11 @@ }; }; +&adc { + vdd-supply = <&ldo4_reg>; + status = "okay"; +}; + &bus_wcore { devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>, <&nocp_mem1_0>, <&nocp_mem1_1>; @@ -293,6 +298,12 @@ regulator-max-microvolt = <1800000>; }; + ldo4_reg: LDO4 { + regulator-name = "vdd_adc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + ldo5_reg: LDO5 { regulator-name = "vdd_ldo5"; regulator-min-microvolt = <1800000>; @@ -499,7 +510,6 @@ &mmc_0 { status = "okay"; mmc-pwrseq = <&emmc_pwrseq>; - cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; diff --git a/dts/src/arm/exynos5440.dtsi b/dts/src/arm/exynos5440.dtsi index e6bffd13ce..2a2e570bbe 100644 --- a/dts/src/arm/exynos5440.dtsi +++ b/dts/src/arm/exynos5440.dtsi @@ -10,6 +10,8 @@ */ #include <dt-bindings/clock/exynos5440.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> / { compatible = "samsung,exynos5440", "samsung,exynos5"; @@ -41,7 +43,8 @@ <0x2E2000 0x1000>, <0x2E4000 0x2000>, <0x2E6000 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; cpus { @@ -72,26 +75,26 @@ arm-pmu { compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; - interrupts = <0 52 4>, - <0 53 4>, - <0 54 4>, - <0 55 4>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; }; timer { compatible = "arm,cortex-a15-timer", "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; clock-frequency = <50000000>; }; cpufreq@160000 { compatible = "samsung,exynos5440-cpufreq"; reg = <0x160000 0x1000>; - interrupts = <0 57 0>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; operating-points = < /* KHz uV */ 1500000 1100000 @@ -108,7 +111,7 @@ serial_0: serial@B0000 { compatible = "samsung,exynos4210-uart"; reg = <0xB0000 0x1000>; - interrupts = <0 2 0>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; clock-names = "uart", "clk_uart_baud0"; }; @@ -116,7 +119,7 @@ serial_1: serial@C0000 { compatible = "samsung,exynos4210-uart"; reg = <0xC0000 0x1000>; - interrupts = <0 3 0>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>, <&clock CLK_B_125>; clock-names = "uart", "clk_uart_baud0"; }; @@ -124,7 +127,7 @@ spi_0: spi@D0000 { compatible = "samsung,exynos5440-spi"; reg = <0xD0000 0x100>; - interrupts = <0 4 0>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; samsung,spi-src-clk = <0>; @@ -136,8 +139,14 @@ pin_ctrl: pinctrl@E0000 { compatible = "samsung,exynos5440-pinctrl"; reg = <0xE0000 0x1000>; - interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, - <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; #gpio-cells = <2>; @@ -162,7 +171,7 @@ i2c@F0000 { compatible = "samsung,exynos5440-i2c"; reg = <0xF0000 0x1000>; - interrupts = <0 5 0>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_B_125>; @@ -172,7 +181,7 @@ i2c@100000 { compatible = "samsung,exynos5440-i2c"; reg = <0x100000 0x1000>; - interrupts = <0 6 0>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clocks = <&clock CLK_B_125>; @@ -182,16 +191,16 @@ watchdog@110000 { compatible = "samsung,s3c2410-wdt"; reg = <0x110000 0x1000>; - interrupts = <0 1 0>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>; clock-names = "watchdog"; }; gmac: ethernet@00230000 { - compatible = "snps,dwmac-3.70a"; + compatible = "snps,dwmac-3.70a", "snps,dwmac"; reg = <0x00230000 0x8000>; interrupt-parent = <&gic>; - interrupts = <0 31 4>; + interrupts = <GIC_SPI 31 4>; interrupt-names = "macirq"; phy-mode = "sgmii"; clocks = <&clock CLK_GMAC0>; @@ -209,7 +218,8 @@ rtc@130000 { compatible = "samsung,s3c6410-rtc"; reg = <0x130000 0x1000>; - interrupts = <0 17 0>, <0 16 0>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>; clock-names = "rtc"; }; @@ -217,7 +227,7 @@ tmuctrl_0: tmuctrl@160118 { compatible = "samsung,exynos5440-tmu"; reg = <0x160118 0x230>, <0x160368 0x10>; - interrupts = <0 58 0>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; #include "exynos5440-tmu-sensor-conf.dtsi" @@ -226,7 +236,7 @@ tmuctrl_1: tmuctrl@16011C { compatible = "samsung,exynos5440-tmu"; reg = <0x16011C 0x230>, <0x160368 0x10>; - interrupts = <0 58 0>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; #include "exynos5440-tmu-sensor-conf.dtsi" @@ -235,7 +245,7 @@ tmuctrl_2: tmuctrl@160120 { compatible = "samsung,exynos5440-tmu"; reg = <0x160120 0x230>, <0x160368 0x10>; - interrupts = <0 58 0>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_B_125>; clock-names = "tmu_apbif"; #include "exynos5440-tmu-sensor-conf.dtsi" @@ -259,7 +269,7 @@ sata@210000 { compatible = "snps,exynos5440-ahci"; reg = <0x210000 0x10000>; - interrupts = <0 30 0>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_SATA>; clock-names = "sata"; }; @@ -267,7 +277,7 @@ ohci@220000 { compatible = "samsung,exynos5440-ohci"; reg = <0x220000 0x1000>; - interrupts = <0 29 0>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_USB>; clock-names = "usbhost"; }; @@ -275,7 +285,7 @@ ehci@221000 { compatible = "samsung,exynos5440-ehci"; reg = <0x221000 0x1000>; - interrupts = <0 29 0>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_USB>; clock-names = "usbhost"; }; @@ -285,7 +295,9 @@ reg = <0x290000 0x1000 0x270000 0x1000 0x271000 0x40>; - interrupts = <0 20 0>, <0 21 0>, <0 22 0>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>; clock-names = "pcie", "pcie_bus"; #address-cells = <3>; @@ -306,7 +318,9 @@ reg = <0x2a0000 0x1000 0x272000 0x1000 0x271040 0x40>; - interrupts = <0 23 0>, <0 24 0>, <0 25 0>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>; clock-names = "pcie", "pcie_bus"; #address-cells = <3>; diff --git a/dts/src/arm/exynos54xx.dtsi b/dts/src/arm/exynos54xx.dtsi index 9d31cdce19..0389e8a10d 100644 --- a/dts/src/arm/exynos54xx.dtsi +++ b/dts/src/arm/exynos54xx.dtsi @@ -62,34 +62,34 @@ <1 &combiner 23 4>, <2 &combiner 25 2>, <3 &combiner 25 3>, - <4 &gic 0 120 0>, - <5 &gic 0 121 0>, - <6 &gic 0 122 0>, - <7 &gic 0 123 0>, - <8 &gic 0 128 0>, - <9 &gic 0 129 0>, - <10 &gic 0 130 0>, - <11 &gic 0 131 0>; + <4 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>, + <5 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>, + <6 &gic 0 122 IRQ_TYPE_LEVEL_HIGH>, + <7 &gic 0 123 IRQ_TYPE_LEVEL_HIGH>, + <8 &gic 0 128 IRQ_TYPE_LEVEL_HIGH>, + <9 &gic 0 129 IRQ_TYPE_LEVEL_HIGH>, + <10 &gic 0 130 IRQ_TYPE_LEVEL_HIGH>, + <11 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>; }; }; watchdog: watchdog@101d0000 { compatible = "samsung,exynos5420-wdt"; reg = <0x101d0000 0x100>; - interrupts = <0 42 0>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; }; sss: sss@10830000 { compatible = "samsung,exynos4210-secss"; reg = <0x10830000 0x300>; - interrupts = <0 112 0>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; }; /* i2c_0-3 are defined in exynos5.dtsi */ hsi2c_4: i2c@12ca0000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12ca0000 0x1000>; - interrupts = <0 60 0>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -98,7 +98,7 @@ hsi2c_5: i2c@12cb0000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12cb0000 0x1000>; - interrupts = <0 61 0>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -107,7 +107,7 @@ hsi2c_6: i2c@12cc0000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12cc0000 0x1000>; - interrupts = <0 62 0>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -116,7 +116,7 @@ hsi2c_7: i2c@12cd0000 { compatible = "samsung,exynos5250-hsi2c"; reg = <0x12cd0000 0x1000>; - interrupts = <0 63 0>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -131,7 +131,7 @@ usbdrd_dwc3_0: dwc3@12000000 { compatible = "snps,dwc3"; reg = <0x12000000 0x10000>; - interrupts = <0 72 0>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; phy-names = "usb2-phy", "usb3-phy"; }; @@ -166,7 +166,7 @@ usbhost2: usb@12110000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12110000 0x100>; - interrupts = <0 71 0>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -179,7 +179,7 @@ usbhost1: usb@12120000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12120000 0x100>; - interrupts = <0 71 0>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/exynos5800-peach-pi.dts b/dts/src/arm/exynos5800-peach-pi.dts index 01f466816f..f9ff7f07ae 100644 --- a/dts/src/arm/exynos5800-peach-pi.dts +++ b/dts/src/arm/exynos5800-peach-pi.dts @@ -665,6 +665,7 @@ status = "okay"; }; +/* eMMC flash */ &mmc_0 { status = "okay"; num-slots = <1>; @@ -683,6 +684,7 @@ bus-width = <8>; }; +/* WiFi SDIO module */ &mmc_1 { status = "okay"; num-slots = <1>; @@ -702,6 +704,7 @@ vqmmc-supply = <&buck10_reg>; }; +/* uSD card */ &mmc_2 { status = "okay"; num-slots = <1>; diff --git a/dts/src/arm/hi3620.dtsi b/dts/src/arm/hi3620.dtsi index c85d07e6db..541d700945 100644 --- a/dts/src/arm/hi3620.dtsi +++ b/dts/src/arm/hi3620.dtsi @@ -11,10 +11,12 @@ * publishhed by the Free Software Foundation. */ -#include "skeleton.dtsi" #include <dt-bindings/clock/hi3620-clock.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { serial0 = &uart0; serial1 = &uart1; @@ -537,6 +539,7 @@ reg = <0x803000 0x188>; #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; #gpio-range-cells = <3>; ranges; @@ -558,6 +561,7 @@ reg = <0x803800 0x2dc>; #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; ranges; pinctrl-single,register-width = <32>; diff --git a/dts/src/arm/hip01.dtsi b/dts/src/arm/hip01.dtsi index 4e9562f806..9d5fd5cfef 100644 --- a/dts/src/arm/hip01.dtsi +++ b/dts/src/arm/hip01.dtsi @@ -11,8 +11,6 @@ * published by the Free Software Foundation. */ -#include "skeleton.dtsi" - / { interrupt-parent = <&gic>; #address-cells = <1>; diff --git a/dts/src/arm/hisi-x5hd2.dtsi b/dts/src/arm/hisi-x5hd2.dtsi index fdcc23d203..6c712a97e1 100644 --- a/dts/src/arm/hisi-x5hd2.dtsi +++ b/dts/src/arm/hisi-x5hd2.dtsi @@ -7,10 +7,12 @@ * publishhed by the Free Software Foundation. */ -#include "skeleton.dtsi" #include <dt-bindings/clock/hix5hd2-clock.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { serial0 = &uart0; }; @@ -436,18 +438,20 @@ }; gmac0: ethernet@1840000 { - compatible = "hisilicon,hix5hd2-gmac"; + compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1"; reg = <0x1840000 0x1000>,<0x184300c 0x4>; interrupts = <0 71 4>; clocks = <&clock HIX5HD2_MAC0_CLK>; + clock-names = "mac_core"; status = "disabled"; }; gmac1: ethernet@1841000 { - compatible = "hisilicon,hix5hd2-gmac"; + compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1"; reg = <0x1841000 0x1000>,<0x1843010 0x4>; interrupts = <0 72 4>; clocks = <&clock HIX5HD2_MAC1_CLK>; + clock-names = "mac_core"; status = "disabled"; }; diff --git a/dts/src/arm/imx1.dtsi b/dts/src/arm/imx1.dtsi index 22f5d1db5b..b792eee389 100644 --- a/dts/src/arm/imx1.dtsi +++ b/dts/src/arm/imx1.dtsi @@ -9,7 +9,6 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" #include "imx1-pinfunc.h" #include <dt-bindings/clock/imx1-clock.h> @@ -17,6 +16,9 @@ #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { gpio0 = &gpio1; gpio1 = &gpio2; diff --git a/dts/src/arm/imx23.dtsi b/dts/src/arm/imx23.dtsi index 440ee9a4a1..ac2a9da62b 100644 --- a/dts/src/arm/imx23.dtsi +++ b/dts/src/arm/imx23.dtsi @@ -9,10 +9,12 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" #include "imx23-pinfunc.h" / { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&icoll>; aliases { @@ -464,7 +466,7 @@ reg = <0x80038000 0x2000>; status = "disabled"; }; - }; + }; apbx@80040000 { compatible = "simple-bus"; diff --git a/dts/src/arm/imx25.dtsi b/dts/src/arm/imx25.dtsi index af6af8741f..831d09a281 100644 --- a/dts/src/arm/imx25.dtsi +++ b/dts/src/arm/imx25.dtsi @@ -9,10 +9,12 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" #include "imx25-pinfunc.h" / { + #address-cells = <1>; + #size-cells = <1>; + aliases { ethernet0 = &fec; gpio0 = &gpio1; diff --git a/dts/src/arm/imx27.dtsi b/dts/src/arm/imx27.dtsi index f818ea483a..9d8b5969ee 100644 --- a/dts/src/arm/imx27.dtsi +++ b/dts/src/arm/imx27.dtsi @@ -9,7 +9,6 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" #include "imx27-pinfunc.h" #include <dt-bindings/clock/imx27-clock.h> @@ -18,6 +17,9 @@ #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { ethernet0 = &fec; gpio0 = &gpio1; diff --git a/dts/src/arm/imx28-m28.dtsi b/dts/src/arm/imx28-m28.dtsi index 214bb1506b..a69856e41b 100644 --- a/dts/src/arm/imx28-m28.dtsi +++ b/dts/src/arm/imx28-m28.dtsi @@ -12,8 +12,8 @@ #include "imx28.dtsi" / { - model = "DENX M28"; - compatible = "denx,m28", "fsl,imx28"; + model = "Aries/DENX M28"; + compatible = "aries,m28", "denx,m28", "fsl,imx28"; memory { reg = <0x40000000 0x08000000>; diff --git a/dts/src/arm/imx28-m28evk.dts b/dts/src/arm/imx28-m28evk.dts index 8d04e57039..dbfb8aab50 100644 --- a/dts/src/arm/imx28-m28evk.dts +++ b/dts/src/arm/imx28-m28evk.dts @@ -13,8 +13,8 @@ #include "imx28-m28.dtsi" / { - model = "DENX M28EVK"; - compatible = "denx,m28evk", "fsl,imx28"; + model = "Aries/DENX M28EVK"; + compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28"; apb@80000000 { apbh@80000000 { diff --git a/dts/src/arm/imx28.dtsi b/dts/src/arm/imx28.dtsi index 0ad893bf5f..3aabf65a6a 100644 --- a/dts/src/arm/imx28.dtsi +++ b/dts/src/arm/imx28.dtsi @@ -10,10 +10,12 @@ */ #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" #include "imx28-pinfunc.h" / { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&icoll>; aliases { diff --git a/dts/src/arm/imx31.dtsi b/dts/src/arm/imx31.dtsi index 1ce7ae94e7..685916e3d8 100644 --- a/dts/src/arm/imx31.dtsi +++ b/dts/src/arm/imx31.dtsi @@ -9,9 +9,10 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; + aliases { serial0 = &uart1; serial1 = &uart2; @@ -118,13 +119,6 @@ interrupts = <19>; clocks = <&clks 25>; }; - - clks: ccm@53f80000{ - compatible = "fsl,imx31-ccm"; - reg = <0x53f80000 0x4000>; - interrupts = <0 31 0x04 0 53 0x04>; - #clock-cells = <1>; - }; }; aips@53f00000 { /* AIPS2 */ @@ -134,6 +128,13 @@ reg = <0x53f00000 0x100000>; ranges; + clks: ccm@53f80000{ + compatible = "fsl,imx31-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>, <53>; + #clock-cells = <1>; + }; + gpt: timer@53f90000 { compatible = "fsl,imx31-gpt"; reg = <0x53f90000 0x4000>; diff --git a/dts/src/arm/imx35.dtsi b/dts/src/arm/imx35.dtsi index f812d586c5..9f40e62291 100644 --- a/dts/src/arm/imx35.dtsi +++ b/dts/src/arm/imx35.dtsi @@ -8,10 +8,12 @@ * Free Software Foundation. */ -#include "skeleton.dtsi" #include "imx35-pinfunc.h" / { + #address-cells = <1>; + #size-cells = <1>; + aliases { ethernet0 = &fec; gpio0 = &gpio1; diff --git a/dts/src/arm/imx50.dtsi b/dts/src/arm/imx50.dtsi index 8fe8beeb68..fe0221e4cb 100644 --- a/dts/src/arm/imx50.dtsi +++ b/dts/src/arm/imx50.dtsi @@ -11,11 +11,13 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" #include "imx50-pinfunc.h" #include <dt-bindings/clock/imx5-clock.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { ethernet0 = &fec; gpio0 = &gpio1; @@ -103,8 +105,8 @@ reg = <0x50004000 0x4000>; interrupts = <1>; clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC1_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC1_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -115,8 +117,8 @@ reg = <0x50008000 0x4000>; interrupts = <2>; clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC2_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC2_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -127,7 +129,7 @@ reg = <0x5000c000 0x4000>; interrupts = <33>; clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, - <&clks IMX5_CLK_UART3_PER_GATE>; + <&clks IMX5_CLK_UART3_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -139,7 +141,7 @@ reg = <0x50010000 0x4000>; interrupts = <36>; clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, - <&clks IMX5_CLK_ECSPI1_PER_GATE>; + <&clks IMX5_CLK_ECSPI1_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -164,8 +166,8 @@ reg = <0x50020000 0x4000>; interrupts = <3>; clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC3_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC3_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -176,8 +178,8 @@ reg = <0x50024000 0x4000>; interrupts = <4>; clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC4_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC4_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -279,7 +281,7 @@ reg = <0x53fa0000 0x4000>; interrupts = <39>; clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, - <&clks IMX5_CLK_GPT_HF_GATE>; + <&clks IMX5_CLK_GPT_HF_GATE>; clock-names = "ipg", "per"; }; @@ -298,7 +300,7 @@ compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; reg = <0x53fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, - <&clks IMX5_CLK_PWM1_HF_GATE>; + <&clks IMX5_CLK_PWM1_HF_GATE>; clock-names = "ipg", "per"; interrupts = <61>; }; @@ -308,7 +310,7 @@ compatible = "fsl,imx50-pwm", "fsl,imx27-pwm"; reg = <0x53fb8000 0x4000>; clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, - <&clks IMX5_CLK_PWM2_HF_GATE>; + <&clks IMX5_CLK_PWM2_HF_GATE>; clock-names = "ipg", "per"; interrupts = <94>; }; @@ -318,7 +320,7 @@ reg = <0x53fbc000 0x4000>; interrupts = <31>; clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, - <&clks IMX5_CLK_UART1_PER_GATE>; + <&clks IMX5_CLK_UART1_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -328,7 +330,7 @@ reg = <0x53fc0000 0x4000>; interrupts = <32>; clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, - <&clks IMX5_CLK_UART2_PER_GATE>; + <&clks IMX5_CLK_UART2_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -383,7 +385,7 @@ reg = <0x53ff0000 0x4000>; interrupts = <13>; clocks = <&clks IMX5_CLK_UART4_IPG_GATE>, - <&clks IMX5_CLK_UART4_PER_GATE>; + <&clks IMX5_CLK_UART4_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -401,7 +403,7 @@ reg = <0x63f90000 0x4000>; interrupts = <86>; clocks = <&clks IMX5_CLK_UART5_IPG_GATE>, - <&clks IMX5_CLK_UART5_PER_GATE>; + <&clks IMX5_CLK_UART5_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -420,7 +422,7 @@ reg = <0x63fac000 0x4000>; interrupts = <37>; clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, - <&clks IMX5_CLK_ECSPI2_PER_GATE>; + <&clks IMX5_CLK_ECSPI2_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -430,7 +432,7 @@ reg = <0x63fb0000 0x4000>; interrupts = <6>; clocks = <&clks IMX5_CLK_SDMA_GATE>, - <&clks IMX5_CLK_SDMA_GATE>; + <&clks IMX5_CLK_SDMA_GATE>; clock-names = "ipg", "ahb"; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin"; }; @@ -442,7 +444,7 @@ reg = <0x63fc0000 0x4000>; interrupts = <38>; clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, - <&clks IMX5_CLK_CSPI_IPG_GATE>; + <&clks IMX5_CLK_CSPI_IPG_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -492,8 +494,8 @@ reg = <0x63fec000 0x4000>; interrupts = <87>; clocks = <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>; + <&clks IMX5_CLK_FEC_GATE>, + <&clks IMX5_CLK_FEC_GATE>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; diff --git a/dts/src/arm/imx51.dtsi b/dts/src/arm/imx51.dtsi index f46fe9bf0b..33526cade7 100644 --- a/dts/src/arm/imx51.dtsi +++ b/dts/src/arm/imx51.dtsi @@ -10,7 +10,6 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" #include "imx51-pinfunc.h" #include <dt-bindings/clock/imx5-clock.h> #include <dt-bindings/gpio/gpio.h> @@ -18,6 +17,9 @@ #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { ethernet0 = &fec; gpio0 = &gpio1; @@ -130,8 +132,8 @@ reg = <0x40000000 0x20000000>; interrupts = <11 10>; clocks = <&clks IMX5_CLK_IPU_GATE>, - <&clks IMX5_CLK_IPU_DI0_GATE>, - <&clks IMX5_CLK_IPU_DI1_GATE>; + <&clks IMX5_CLK_IPU_DI0_GATE>, + <&clks IMX5_CLK_IPU_DI1_GATE>; clock-names = "bus", "di0", "di1"; resets = <&src 2>; @@ -169,8 +171,8 @@ reg = <0x70004000 0x4000>; interrupts = <1>; clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC1_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC1_PER_GATE>; clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -180,8 +182,8 @@ reg = <0x70008000 0x4000>; interrupts = <2>; clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC2_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC2_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -192,7 +194,7 @@ reg = <0x7000c000 0x4000>; interrupts = <33>; clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, - <&clks IMX5_CLK_UART3_PER_GATE>; + <&clks IMX5_CLK_UART3_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -204,7 +206,7 @@ reg = <0x70010000 0x4000>; interrupts = <36>; clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, - <&clks IMX5_CLK_ECSPI1_PER_GATE>; + <&clks IMX5_CLK_ECSPI1_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -229,8 +231,8 @@ reg = <0x70020000 0x4000>; interrupts = <3>; clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC3_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC3_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -241,8 +243,8 @@ reg = <0x70024000 0x4000>; interrupts = <4>; clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC4_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC4_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -364,7 +366,7 @@ reg = <0x73fa0000 0x4000>; interrupts = <39>; clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, - <&clks IMX5_CLK_GPT_HF_GATE>; + <&clks IMX5_CLK_GPT_HF_GATE>; clock-names = "ipg", "per"; }; @@ -378,7 +380,7 @@ compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; reg = <0x73fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, - <&clks IMX5_CLK_PWM1_HF_GATE>; + <&clks IMX5_CLK_PWM1_HF_GATE>; clock-names = "ipg", "per"; interrupts = <61>; }; @@ -388,7 +390,7 @@ compatible = "fsl,imx51-pwm", "fsl,imx27-pwm"; reg = <0x73fb8000 0x4000>; clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, - <&clks IMX5_CLK_PWM2_HF_GATE>; + <&clks IMX5_CLK_PWM2_HF_GATE>; clock-names = "ipg", "per"; interrupts = <94>; }; @@ -398,7 +400,7 @@ reg = <0x73fbc000 0x4000>; interrupts = <31>; clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, - <&clks IMX5_CLK_UART1_PER_GATE>; + <&clks IMX5_CLK_UART1_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -408,7 +410,7 @@ reg = <0x73fc0000 0x4000>; interrupts = <32>; clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, - <&clks IMX5_CLK_UART2_PER_GATE>; + <&clks IMX5_CLK_UART2_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -456,7 +458,7 @@ reg = <0x83fac000 0x4000>; interrupts = <37>; clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, - <&clks IMX5_CLK_ECSPI2_PER_GATE>; + <&clks IMX5_CLK_ECSPI2_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -466,7 +468,7 @@ reg = <0x83fb0000 0x4000>; interrupts = <6>; clocks = <&clks IMX5_CLK_SDMA_GATE>, - <&clks IMX5_CLK_SDMA_GATE>; + <&clks IMX5_CLK_SDMA_GATE>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; @@ -479,7 +481,7 @@ reg = <0x83fc0000 0x4000>; interrupts = <38>; clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, - <&clks IMX5_CLK_CSPI_IPG_GATE>; + <&clks IMX5_CLK_CSPI_IPG_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -582,8 +584,8 @@ reg = <0x83fec000 0x4000>; interrupts = <87>; clocks = <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>; + <&clks IMX5_CLK_FEC_GATE>, + <&clks IMX5_CLK_FEC_GATE>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; diff --git a/dts/src/arm/imx53-m53.dtsi b/dts/src/arm/imx53-m53.dtsi index d259f57bfd..ec390aa562 100644 --- a/dts/src/arm/imx53-m53.dtsi +++ b/dts/src/arm/imx53-m53.dtsi @@ -12,8 +12,8 @@ #include "imx53.dtsi" / { - model = "DENX M53"; - compatible = "denx,imx53-m53", "fsl,imx53"; + model = "Aries/DENX M53"; + compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53"; memory { reg = <0x70000000 0x20000000>, diff --git a/dts/src/arm/imx53-m53evk.dts b/dts/src/arm/imx53-m53evk.dts index dcee1e0f96..4347a321c7 100644 --- a/dts/src/arm/imx53-m53evk.dts +++ b/dts/src/arm/imx53-m53evk.dts @@ -13,8 +13,8 @@ #include "imx53-m53.dtsi" / { - model = "DENX M53EVK"; - compatible = "denx,imx53-m53evk", "fsl,imx53"; + model = "Aries/DENX M53EVK"; + compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53"; display1: display@di1 { compatible = "fsl,imx-parallel-display"; diff --git a/dts/src/arm/imx53.dtsi b/dts/src/arm/imx53.dtsi index 0777b41cdf..ca51dc03e3 100644 --- a/dts/src/arm/imx53.dtsi +++ b/dts/src/arm/imx53.dtsi @@ -10,7 +10,6 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include "skeleton.dtsi" #include "imx53-pinfunc.h" #include <dt-bindings/clock/imx5-clock.h> #include <dt-bindings/gpio/gpio.h> @@ -18,6 +17,9 @@ #include <dt-bindings/interrupt-controller/irq.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { ethernet0 = &fec; gpio0 = &gpio1; @@ -131,8 +133,8 @@ reg = <0x18000000 0x08000000>; interrupts = <11 10>; clocks = <&clks IMX5_CLK_IPU_GATE>, - <&clks IMX5_CLK_IPU_DI0_GATE>, - <&clks IMX5_CLK_IPU_DI1_GATE>; + <&clks IMX5_CLK_IPU_DI0_GATE>, + <&clks IMX5_CLK_IPU_DI1_GATE>; clock-names = "bus", "di0", "di1"; resets = <&src 2>; @@ -199,8 +201,8 @@ reg = <0x50004000 0x4000>; interrupts = <1>; clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC1_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC1_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -211,8 +213,8 @@ reg = <0x50008000 0x4000>; interrupts = <2>; clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC2_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC2_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -223,7 +225,7 @@ reg = <0x5000c000 0x4000>; interrupts = <33>; clocks = <&clks IMX5_CLK_UART3_IPG_GATE>, - <&clks IMX5_CLK_UART3_PER_GATE>; + <&clks IMX5_CLK_UART3_PER_GATE>; clock-names = "ipg", "per"; dmas = <&sdma 42 4 0>, <&sdma 43 4 0>; dma-names = "rx", "tx"; @@ -237,7 +239,7 @@ reg = <0x50010000 0x4000>; interrupts = <36>; clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>, - <&clks IMX5_CLK_ECSPI1_PER_GATE>; + <&clks IMX5_CLK_ECSPI1_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -264,8 +266,8 @@ reg = <0x50020000 0x4000>; interrupts = <3>; clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC3_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC3_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -276,8 +278,8 @@ reg = <0x50024000 0x4000>; interrupts = <4>; clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>, - <&clks IMX5_CLK_DUMMY>, - <&clks IMX5_CLK_ESDHC4_PER_GATE>; + <&clks IMX5_CLK_DUMMY>, + <&clks IMX5_CLK_ESDHC4_PER_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -419,7 +421,7 @@ reg = <0x53fa0000 0x4000>; interrupts = <39>; clocks = <&clks IMX5_CLK_GPT_IPG_GATE>, - <&clks IMX5_CLK_GPT_HF_GATE>; + <&clks IMX5_CLK_GPT_HF_GATE>; clock-names = "ipg", "per"; }; @@ -440,11 +442,11 @@ reg = <0x53fa8008 0x4>; gpr = <&gpr>; clocks = <&clks IMX5_CLK_LDB_DI0_SEL>, - <&clks IMX5_CLK_LDB_DI1_SEL>, - <&clks IMX5_CLK_IPU_DI0_SEL>, - <&clks IMX5_CLK_IPU_DI1_SEL>, - <&clks IMX5_CLK_LDB_DI0_GATE>, - <&clks IMX5_CLK_LDB_DI1_GATE>; + <&clks IMX5_CLK_LDB_DI1_SEL>, + <&clks IMX5_CLK_IPU_DI0_SEL>, + <&clks IMX5_CLK_IPU_DI1_SEL>, + <&clks IMX5_CLK_LDB_DI0_GATE>, + <&clks IMX5_CLK_LDB_DI1_GATE>; clock-names = "di0_pll", "di1_pll", "di0_sel", "di1_sel", "di0", "di1"; @@ -486,7 +488,7 @@ compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; reg = <0x53fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, - <&clks IMX5_CLK_PWM1_HF_GATE>; + <&clks IMX5_CLK_PWM1_HF_GATE>; clock-names = "ipg", "per"; interrupts = <61>; }; @@ -496,7 +498,7 @@ compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; reg = <0x53fb8000 0x4000>; clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>, - <&clks IMX5_CLK_PWM2_HF_GATE>; + <&clks IMX5_CLK_PWM2_HF_GATE>; clock-names = "ipg", "per"; interrupts = <94>; }; @@ -506,7 +508,7 @@ reg = <0x53fbc000 0x4000>; interrupts = <31>; clocks = <&clks IMX5_CLK_UART1_IPG_GATE>, - <&clks IMX5_CLK_UART1_PER_GATE>; + <&clks IMX5_CLK_UART1_PER_GATE>; clock-names = "ipg", "per"; dmas = <&sdma 18 4 0>, <&sdma 19 4 0>; dma-names = "rx", "tx"; @@ -518,7 +520,7 @@ reg = <0x53fc0000 0x4000>; interrupts = <32>; clocks = <&clks IMX5_CLK_UART2_IPG_GATE>, - <&clks IMX5_CLK_UART2_PER_GATE>; + <&clks IMX5_CLK_UART2_PER_GATE>; clock-names = "ipg", "per"; dmas = <&sdma 12 4 0>, <&sdma 13 4 0>; dma-names = "rx", "tx"; @@ -530,7 +532,7 @@ reg = <0x53fc8000 0x4000>; interrupts = <82>; clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, - <&clks IMX5_CLK_CAN1_SERIAL_GATE>; + <&clks IMX5_CLK_CAN1_SERIAL_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -540,7 +542,7 @@ reg = <0x53fcc000 0x4000>; interrupts = <83>; clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>, - <&clks IMX5_CLK_CAN2_SERIAL_GATE>; + <&clks IMX5_CLK_CAN2_SERIAL_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -603,7 +605,7 @@ reg = <0x53ff0000 0x4000>; interrupts = <13>; clocks = <&clks IMX5_CLK_UART4_IPG_GATE>, - <&clks IMX5_CLK_UART4_PER_GATE>; + <&clks IMX5_CLK_UART4_PER_GATE>; clock-names = "ipg", "per"; dmas = <&sdma 2 4 0>, <&sdma 3 4 0>; dma-names = "rx", "tx"; @@ -635,7 +637,7 @@ reg = <0x63f90000 0x4000>; interrupts = <86>; clocks = <&clks IMX5_CLK_UART5_IPG_GATE>, - <&clks IMX5_CLK_UART5_PER_GATE>; + <&clks IMX5_CLK_UART5_PER_GATE>; clock-names = "ipg", "per"; dmas = <&sdma 16 4 0>, <&sdma 17 4 0>; dma-names = "rx", "tx"; @@ -656,7 +658,7 @@ reg = <0x63fac000 0x4000>; interrupts = <37>; clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>, - <&clks IMX5_CLK_ECSPI2_PER_GATE>; + <&clks IMX5_CLK_ECSPI2_PER_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -666,7 +668,7 @@ reg = <0x63fb0000 0x4000>; interrupts = <6>; clocks = <&clks IMX5_CLK_SDMA_GATE>, - <&clks IMX5_CLK_SDMA_GATE>; + <&clks IMX5_CLK_SDMA_GATE>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; @@ -679,7 +681,7 @@ reg = <0x63fc0000 0x4000>; interrupts = <38>; clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>, - <&clks IMX5_CLK_CSPI_IPG_GATE>; + <&clks IMX5_CLK_CSPI_IPG_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -755,8 +757,8 @@ reg = <0x63fec000 0x4000>; interrupts = <87>; clocks = <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>, - <&clks IMX5_CLK_FEC_GATE>; + <&clks IMX5_CLK_FEC_GATE>, + <&clks IMX5_CLK_FEC_GATE>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; @@ -766,7 +768,7 @@ reg = <0x63ff0000 0x1000>; interrupts = <92>; clocks = <&clks IMX5_CLK_TVE_GATE>, - <&clks IMX5_CLK_IPU_DI1_SEL>; + <&clks IMX5_CLK_IPU_DI1_SEL>; clock-names = "tve", "di_sel"; status = "disabled"; @@ -782,7 +784,7 @@ reg = <0x63ff4000 0x1000>; interrupts = <9>; clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, - <&clks IMX5_CLK_VPU_GATE>; + <&clks IMX5_CLK_VPU_GATE>; clock-names = "per", "ahb"; resets = <&src 1>; iram = <&ocram>; @@ -793,7 +795,7 @@ reg = <0x63ff8000 0x4000>; interrupts = <19 20>; clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>, - <&clks IMX5_CLK_SAHARA_IPG_GATE>; + <&clks IMX5_CLK_SAHARA_IPG_GATE>; clock-names = "ipg", "ahb"; }; }; diff --git a/dts/src/arm/imx6dl-colibri-eval-v3.dts b/dts/src/arm/imx6dl-colibri-eval-v3.dts new file mode 100644 index 0000000000..e0c2172786 --- /dev/null +++ b/dts/src/arm/imx6dl-colibri-eval-v3.dts @@ -0,0 +1,253 @@ +/* + * Copyright 2014-2016 Toradex AG + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6dl.dtsi" +#include "imx6qdl-colibri.dtsi" + +/ { + model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3"; + compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl", + "fsl,imx6dl"; + + aliases { + i2c0 = &i2c2; + i2c1 = &i2c3; + }; + + aliases { + rtc0 = &rtc_i2c; + rtc1 = &snvs_rtc; + }; + + clocks { + /* Fixed crystal dedicated to mcp251x */ + clk16m: clk@1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "clk16m"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + wakeup { + label = "Wake-Up"; + gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* SODIMM 45 */ + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu"; + backlight = <&backlight>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; +}; + +&backlight { + brightness-levels = <0 127 191 223 239 247 251 255>; + default-brightness-level = <1>; + status = "okay"; +}; + +/* Colibri SSP */ +&ecspi4 { + status = "okay"; + + mcp251x0: mcp251x@1 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio3>; + interrupts = <27 0x2>; + spi-max-frequency = <10000000>; + status = "okay"; + }; +}; + +&hdmi { + status = "okay"; +}; + +/* + * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) + */ +&i2c3 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc_i2c: rtc@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +®_usb_host_vbus { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_host_vbus>; + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +/* Colibri MMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc_cd>; + cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ + status = "okay"; +}; + +&weim { + status = "okay"; + + /* weim memory map: 32MB on CS0, 32MB on CS1, 32MB on CS2 */ + ranges = <0 0 0x08000000 0x02000000 + 1 0 0x0a000000 0x02000000 + 2 0 0x0c000000 0x02000000>; + + /* SRAM on Colibri nEXT_CS0 */ + sram@0,0 { + compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; + reg = <0 0 0x00010000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000 + 0x00000000 0x04000040 0x00000000>; + }; + + /* SRAM on Colibri nEXT_CS1 */ + sram@1,0 { + compatible = "cypress,cy7c1019dv33-10zsxi, mtd-ram"; + reg = <1 0 0x00010000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000 + 0x00000000 0x04000040 0x00000000>; + }; +}; diff --git a/dts/src/arm/imx6dl-icore.dts b/dts/src/arm/imx6dl-icore.dts new file mode 100644 index 0000000000..aec332c14a --- /dev/null +++ b/dts/src/arm/imx6dl-icore.dts @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-icore.dtsi" + +/ { + model = "Engicam i.CoreM6 DualLite/Solo Starter Kit"; + compatible = "engicam,imx6-icore", "fsl,imx6dl"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; diff --git a/dts/src/arm/imx6dl-riotboard.dts b/dts/src/arm/imx6dl-riotboard.dts index 75d73437ad..2cb72824e8 100644 --- a/dts/src/arm/imx6dl-riotboard.dts +++ b/dts/src/arm/imx6dl-riotboard.dts @@ -390,7 +390,7 @@ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 /* AR8035 pin strapping: MODE#3: pull up */ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 /* GPIO16 -> AR8035 25MHz */ - MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0 /* AR8035 interrupt */ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 >; diff --git a/dts/src/arm/imx6dl-tx6dl-comtft.dts b/dts/src/arm/imx6dl-tx6dl-comtft.dts index 063fe7510d..aac42ac465 100644 --- a/dts/src/arm/imx6dl-tx6dl-comtft.dts +++ b/dts/src/arm/imx6dl-tx6dl-comtft.dts @@ -105,7 +105,7 @@ pixelclk-active = <1>; }; }; - }; + }; }; &can1 { diff --git a/dts/src/arm/imx6dl-tx6u-801x.dts b/dts/src/arm/imx6dl-tx6u-801x.dts index b7a72840b7..d1f1298ec5 100644 --- a/dts/src/arm/imx6dl-tx6u-801x.dts +++ b/dts/src/arm/imx6dl-tx6u-801x.dts @@ -199,7 +199,7 @@ pixelclk-active = <0>; }; }; - }; + }; }; &ipu1_di0_disp0 { diff --git a/dts/src/arm/imx6q-apalis-ixora.dts b/dts/src/arm/imx6q-apalis-ixora.dts index 207b85b91a..0ea75f7b60 100644 --- a/dts/src/arm/imx6q-apalis-ixora.dts +++ b/dts/src/arm/imx6q-apalis-ixora.dts @@ -147,28 +147,6 @@ gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; }; }; - - pwmleds { - compatible = "pwm-leds"; - - ledpwm1 { - label = "PWM1"; - pwms = <&pwm1 0 50000>; - max-brightness = <255>; - }; - - ledpwm2 { - label = "PWM2"; - pwms = <&pwm2 0 50000>; - max-brightness = <255>; - }; - - ledpwm3 { - label = "PWM3"; - pwms = <&pwm3 0 50000>; - max-brightness = <255>; - }; - }; }; &backlight { diff --git a/dts/src/arm/imx6q-b650v3.dts b/dts/src/arm/imx6q-b650v3.dts index d853887254..1dcaee23ed 100644 --- a/dts/src/arm/imx6q-b650v3.dts +++ b/dts/src/arm/imx6q-b650v3.dts @@ -98,3 +98,9 @@ line-name = "PCA9539-P05"; }; }; + +&usbphy1 { + fsl,tx-cal-45-dn-ohms = <55>; + fsl,tx-cal-45-dp-ohms = <55>; + fsl,tx-d-cal = <100>; +}; diff --git a/dts/src/arm/imx6q-cm-fx6.dts b/dts/src/arm/imx6q-cm-fx6.dts index 59bc5a4dce..a150bca84d 100644 --- a/dts/src/arm/imx6q-cm-fx6.dts +++ b/dts/src/arm/imx6q-cm-fx6.dts @@ -183,7 +183,6 @@ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; }; diff --git a/dts/src/arm/imx6q-evi.dts b/dts/src/arm/imx6q-evi.dts index 6de21ff47c..7c7c1a855e 100644 --- a/dts/src/arm/imx6q-evi.dts +++ b/dts/src/arm/imx6q-evi.dts @@ -232,10 +232,7 @@ }; &weim { - #address-cells = <2>; - #size-cells = <1>; ranges = <0 0 0x08000000 0x08000000>; - fsl,weim-cs-gpr = <&gpr>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_weimfpga &pinctrl_weimcs>; status = "okay"; diff --git a/dts/src/arm/imx6q-icore.dts b/dts/src/arm/imx6q-icore.dts new file mode 100644 index 0000000000..025f54350c --- /dev/null +++ b/dts/src/arm/imx6q-icore.dts @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-icore.dtsi" + +/ { + model = "Engicam i.CoreM6 Quad/Dual Starter Kit"; + compatible = "engicam,imx6-icore", "fsl,imx6q"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; diff --git a/dts/src/arm/imx6q-nitrogen6_som2.dts b/dts/src/arm/imx6q-nitrogen6_som2.dts new file mode 100644 index 0000000000..cf4feefe02 --- /dev/null +++ b/dts/src/arm/imx6q-nitrogen6_som2.dts @@ -0,0 +1,53 @@ +/* + * Copyright 2016 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-nitrogen6_som2.dtsi" + +/ { + model = "Boundary Devices i.MX6 Quad Nitrogen6_SOM2 Board"; + compatible = "boundary,imx6q-nitrogen6_som2", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/dts/src/arm/imx6q-novena.dts b/dts/src/arm/imx6q-novena.dts index 1723e89e3a..758bca9678 100644 --- a/dts/src/arm/imx6q-novena.dts +++ b/dts/src/arm/imx6q-novena.dts @@ -451,6 +451,10 @@ status = "okay"; }; +&pwm1 { + status = "okay"; +}; + &sata { target-supply = <®_sata>; fsl,transmit-level-mV = <1025>; diff --git a/dts/src/arm/imx6q-phytec-pbab01.dts b/dts/src/arm/imx6q-phytec-pbab01.dts index c139ac0ebe..1f4771304d 100644 --- a/dts/src/arm/imx6q-phytec-pbab01.dts +++ b/dts/src/arm/imx6q-phytec-pbab01.dts @@ -23,5 +23,5 @@ }; &sata { - status = "okay"; + status = "okay"; }; diff --git a/dts/src/arm/imx6q-tx6q-1010-comtft.dts b/dts/src/arm/imx6q-tx6q-1010-comtft.dts index 65e95ae750..71746edc2e 100644 --- a/dts/src/arm/imx6q-tx6q-1010-comtft.dts +++ b/dts/src/arm/imx6q-tx6q-1010-comtft.dts @@ -105,7 +105,7 @@ pixelclk-active = <1>; }; }; - }; + }; }; &can1 { diff --git a/dts/src/arm/imx6q-tx6q-1010.dts b/dts/src/arm/imx6q-tx6q-1010.dts index 20cd0e7b3e..f9cd21a41a 100644 --- a/dts/src/arm/imx6q-tx6q-1010.dts +++ b/dts/src/arm/imx6q-tx6q-1010.dts @@ -199,7 +199,7 @@ pixelclk-active = <0>; }; }; - }; + }; }; &ipu1_di0_disp0 { diff --git a/dts/src/arm/imx6q-tx6q-1020-comtft.dts b/dts/src/arm/imx6q-tx6q-1020-comtft.dts index 9ed243b704..959ff3fb73 100644 --- a/dts/src/arm/imx6q-tx6q-1020-comtft.dts +++ b/dts/src/arm/imx6q-tx6q-1020-comtft.dts @@ -105,7 +105,7 @@ pixelclk-active = <1>; }; }; - }; + }; }; &can1 { diff --git a/dts/src/arm/imx6q-tx6q-1020.dts b/dts/src/arm/imx6q-tx6q-1020.dts index 347b531d37..b49133d25d 100644 --- a/dts/src/arm/imx6q-tx6q-1020.dts +++ b/dts/src/arm/imx6q-tx6q-1020.dts @@ -199,7 +199,7 @@ pixelclk-active = <0>; }; }; - }; + }; }; &ds1339 { diff --git a/dts/src/arm/imx6q-utilite-pro.dts b/dts/src/arm/imx6q-utilite-pro.dts index 61990630a7..22009947ce 100644 --- a/dts/src/arm/imx6q-utilite-pro.dts +++ b/dts/src/arm/imx6q-utilite-pro.dts @@ -68,7 +68,41 @@ label = "Power Button"; gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; - gpio-key,wakeup; + wakeup-source; + }; + }; + + i2cmux { + compatible = "i2c-mux-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1mux>; + #address-cells = <1>; + #size-cells = <0>; + + mux-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + i2c-parent = <&i2c1>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "at24,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + em3027: rtc@56 { + compatible = "emmicro,em3027"; + reg = <0x56>; + }; + }; + + i2c_dvi_ddc: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; }; }; }; @@ -82,17 +116,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; - - eeprom@50 { - compatible = "at24,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - - em3027: rtc@56 { - compatible = "emmicro,em3027"; - reg = <0x56>; - }; }; &i2c2 { @@ -115,6 +138,12 @@ >; }; + pinctrl_i2c1mux: i2c1muxgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 diff --git a/dts/src/arm/imx6qdl-apalis.dtsi b/dts/src/arm/imx6qdl-apalis.dtsi index 99e323b572..8c8a049eb3 100644 --- a/dts/src/arm/imx6qdl-apalis.dtsi +++ b/dts/src/arm/imx6qdl-apalis.dtsi @@ -49,7 +49,10 @@ backlight: backlight { compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_bl_on>; pwms = <&pwm4 0 5000000>; + enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -620,6 +623,12 @@ >; }; + pinctrl_gpio_bl_on: gpioblon { + fsl,pins = < + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 + >; + }; + pinctrl_gpio_keys: gpio1io04grp { fsl,pins = < /* Power button */ diff --git a/dts/src/arm/imx6qdl-apf6dev.dtsi b/dts/src/arm/imx6qdl-apf6dev.dtsi index edbce222c7..5e7792d6bf 100644 --- a/dts/src/arm/imx6qdl-apf6dev.dtsi +++ b/dts/src/arm/imx6qdl-apf6dev.dtsi @@ -347,13 +347,13 @@ fsl,pins = < MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x100b1 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 - MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 - MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 - MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1 - MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1 - MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1 - MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 - MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1 >; }; diff --git a/dts/src/arm/imx6qdl-colibri.dtsi b/dts/src/arm/imx6qdl-colibri.dtsi new file mode 100644 index 0000000000..e6faa653f9 --- /dev/null +++ b/dts/src/arm/imx6qdl-colibri.dtsi @@ -0,0 +1,890 @@ +/* + * Copyright 2014-2016 Toradex AG + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Toradex Colibri iMX6DL/S Module"; + compatible = "toradex,colibri_imx6dl", "fsl,imx6dl"; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_bl_on>; + pwms = <&pwm3 0 5000000>; + enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */ + status = "disabled"; + }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_host_vbus: regulator-usb-host-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_regulator_usbh_pwr>; + regulator-name = "usb_host_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; /* USBH_PEN */ + status = "disabled"; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx6dl-colibri-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HP_OUT", + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias"; + mux-int-port = <1>; + mux-ext-port = <5>; + }; + + /* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */ + sound_spdif: sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-in; + spdif-out; + status = "disabled"; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>; + status = "okay"; +}; + +/* Optional on SODIMM 55/63 */ +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + +/* Optional on SODIMM 178/188 */ +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "disabled"; +}; + +/* Colibri SSP */ +&ecspi4 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + status = "disabled"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_ddc>; + status = "disabled"; +}; + +/* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + regulator-always-on; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + /* vgen1: unused */ + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-boot-on; + regulator-always-on; + }; + + /* vgen3: unused */ + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + /* STMPE811 touch screen controller */ + stmpe811@41 { + compatible = "st,stmpe811"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio6>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + reg = <0>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; +}; + +/* + * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board) + */ +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default", "recovery"; + pinctrl-0 = <&pinctrl_i2c3>; + pinctrl-1 = <&pinctrl_i2c3_recovery>; + scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + status = "disabled"; +}; + +/* Colibri PWM<B> */ +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "disabled"; +}; + +/* Colibri PWM<D> */ +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "disabled"; +}; + +/* Colibri PWM<A> */ +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "disabled"; +}; + +/* Colibri PWM<C> */ +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "disabled"; +}; + +/* Optional S/PDIF out on SODIMM 137 */ +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + status = "disabled"; +}; + +&ssi1 { + status = "okay"; +}; + +/* Colibri UART_A */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; + fsl,dte-mode; + uart-has-rtscts; + status = "disabled"; +}; + +/* Colibri UART_B */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_dte>; + fsl,dte-mode; + uart-has-rtscts; + status = "disabled"; +}; + +/* Colibri UART_C */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_dte>; + fsl,dte-mode; + status = "disabled"; +}; + +&usbotg { + pinctrl-names = "default"; + disable-over-current; + dr_mode = "peripheral"; + status = "disabled"; +}; + +/* Colibri MMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + vqmmc-supply = <®_3p3v>; + bus-width = <4>; + voltage-ranges = <3300 3300>; + status = "disabled"; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + vqmmc-supply = <®_3p3v>; + bus-width = <8>; + voltage-ranges = <3300 3300>; + non-removable; + status = "okay"; +}; + +&weim { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_weim_sram &pinctrl_weim_cs0 + &pinctrl_weim_cs1 &pinctrl_weim_cs2 + &pinctrl_weim_rdnwr &pinctrl_weim_npwe>; + #address-cells = <2>; + #size-cells = <1>; + status = "disabled"; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x130b0 + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + >; + }; + + pinctrl_cam_mclk: cammclkgrp { + fsl,pins = < + /* Parallel Camera CAM sys_mclk */ + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0 + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + /* SPI CS */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK ((1<<30) | 0x1b0b0) + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_gpio_bl_on: gpioblon { + fsl,pins = < + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 + >; + }; + + pinctrl_gpio_keys: gpiokeys { + fsl,pins = < + /* Power button */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 + >; + }; + + pinctrl_hdmi_ddc: hdmiddcgrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3_recovery: i2c3recoverygrp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1 + >; + }; + + pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */ + fsl,pins = < + MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12 0xb0b1 + MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13 0xb0b1 + MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14 0xb0b1 + MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15 0xb0b1 + MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16 0xb0b1 + MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17 0xb0b1 + MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18 0xb0b1 + MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19 0xb0b1 + MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK 0xb0b1 + MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC 0xb0b1 + MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC 0xb0b1 + /* Disable PWM pins on camera interface */ + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x40 + MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x40 + >; + }; + + pinctrl_ipu1_lcdif: ipu1lcdifgrp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xa1 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xa1 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0xa1 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0xa1 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xa1 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xa1 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xa1 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xa1 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xa1 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xa1 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xa1 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xa1 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xa1 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xa1 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xa1 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xa1 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xa1 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xa1 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xa1 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xa1 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xa1 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xa1 + >; + }; + + pinctrl_mic_gnd: gpiomicgnd { + fsl,pins = < + /* Controls Mic GND, PU or '1' pull Mic GND to GND */ + MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0 + >; + }; + + pinctrl_mmc_cd: gpiommccd { + fsl,pins = < + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x80000000 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x00040 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x00040 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp { + fsl,pins = < + /* USBH_EN */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x0f058 + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0 + >; + }; + + pinctrl_touch_int: gpiotouchintgrp { + fsl,pins = < + /* STMPE811 interrupt */ + MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0 + >; + }; + + pinctrl_uart1_dce: uart1dcegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + /* DTE mode */ + pinctrl_uart1_dte: uart1dtegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1 + >; + }; + + /* Additional DTR, DSR, DCD */ + pinctrl_uart1_ctrl: uart1ctrlgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0 + MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0 + MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0 + >; + }; + + pinctrl_uart2_dte: uart2dtegrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart3_dte: uart3dtegrp { + fsl,pins = < + MX6QDL_PAD_SD4_CLK__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_CMD__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbc_det: usbcdetgrp { + fsl,pins = < + /* USBC_DET */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + /* USBC_DET_EN */ + MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26 0x0f058 + /* USBC_DET_OVERWRITE */ + MX6QDL_PAD_RGMII_RXC__GPIO6_IO30 0x0f058 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17071 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10071 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + /* eMMC reset */ + MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 + /* eMMC reset */ + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 + /* eMMC reset */ + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 + >; + }; + + pinctrl_weim_cs0: weimcs0grp { + fsl,pins = < + /* nEXT_CS0 */ + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1 + >; + }; + + pinctrl_weim_cs1: weimcs1grp { + fsl,pins = < + /* nEXT_CS1 */ + MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1 + >; + }; + + pinctrl_weim_cs2: weimcs2grp { + fsl,pins = < + /* nEXT_CS2 */ + MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0xb0b1 + >; + }; + + pinctrl_weim_sram: weimsramgrp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1 + /* Data */ + MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0 + MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0 + /* Address */ + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1 + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1 + >; + }; + + pinctrl_weim_rdnwr: weimrdnwr { + fsl,pins = < + MX6QDL_PAD_SD2_CLK__GPIO1_IO10 0x0040 + MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x130b0 + >; + }; + + pinctrl_weim_npwe: weimnpwe { + fsl,pins = < + MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x0040 + MX6QDL_PAD_RGMII_TD2__GPIO6_IO22 0x130b0 + >; + }; + + /* ADDRESS[16:18] [25] used as GPIO */ + pinctrl_weim_gpio_1: weimgpio-1 { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + >; + }; + + /* ADDRESS[19:24] used as GPIO */ + pinctrl_weim_gpio_2: weimgpio-2 { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + >; + }; + + /* DATA[16:31] used as GPIO */ + pinctrl_weim_gpio_3: weimgpio-3 { + fsl,pins = < + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b0 + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x1b0b0 + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0 + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + /* DQM[0:3] used as GPIO */ + pinctrl_weim_gpio_4: weimgpio-4 { + fsl,pins = < + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 + MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0 + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + >; + }; + + /* RDY used as GPIO */ + pinctrl_weim_gpio_5: weimgpio-5 { + fsl,pins = < + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b0 + >; + }; + + /* ADDRESS[16] DATA[30] used as GPIO */ + pinctrl_weim_gpio_6: weimgpio-6 { + fsl,pins = < + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 + >; + }; +}; diff --git a/dts/src/arm/imx6qdl-gw52xx.dtsi b/dts/src/arm/imx6qdl-gw52xx.dtsi index a7100f9912..54aca3a07c 100644 --- a/dts/src/arm/imx6qdl-gw52xx.dtsi +++ b/dts/src/arm/imx6qdl-gw52xx.dtsi @@ -153,9 +153,9 @@ &clks { assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; }; &ecspi3 { diff --git a/dts/src/arm/imx6qdl-gw53xx.dtsi b/dts/src/arm/imx6qdl-gw53xx.dtsi index 8953eba057..88e5cb3b6b 100644 --- a/dts/src/arm/imx6qdl-gw53xx.dtsi +++ b/dts/src/arm/imx6qdl-gw53xx.dtsi @@ -154,9 +154,9 @@ &clks { assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; }; &fec { diff --git a/dts/src/arm/imx6qdl-gw54xx.dtsi b/dts/src/arm/imx6qdl-gw54xx.dtsi index 6ac41c7ed3..1753ab720b 100644 --- a/dts/src/arm/imx6qdl-gw54xx.dtsi +++ b/dts/src/arm/imx6qdl-gw54xx.dtsi @@ -144,9 +144,9 @@ &clks { assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, - <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, - <&clks IMX6QDL_CLK_PLL3_USB_OTG>; + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; }; &fec { diff --git a/dts/src/arm/imx6qdl-gw552x.dtsi b/dts/src/arm/imx6qdl-gw552x.dtsi index 805e23674a..ee83161f67 100644 --- a/dts/src/arm/imx6qdl-gw552x.dtsi +++ b/dts/src/arm/imx6qdl-gw552x.dtsi @@ -291,7 +291,7 @@ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 >; - }; + }; pinctrl_wdog: wdoggrp { fsl,pins = < diff --git a/dts/src/arm/imx6qdl-icore.dtsi b/dts/src/arm/imx6qdl-icore.dtsi new file mode 100644 index 0000000000..023839a02d --- /dev/null +++ b/dts/src/arm/imx6qdl-icore.dtsi @@ -0,0 +1,265 @@ +/* + * Copyright (C) 2016 Amarula Solutions B.V. + * Copyright (C) 2016 Engicam S.r.l. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + memory { + reg = <0x10000000 0x80000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; + + rmii_clk: clock-rmii-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; /* 25MHz for example */ + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_3p3v>; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_3p3v>; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; + clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>; + phy-mode = "rmii"; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + disable-over-current; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b1 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0 + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020 + >; + }; + + pinctrl_gpmi_nand: gpmi-nand { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17070 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10070 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17070 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070 + >; + }; +}; diff --git a/dts/src/arm/imx6qdl-nit6xlite.dtsi b/dts/src/arm/imx6qdl-nit6xlite.dtsi index 880bd782a5..63acd54f52 100644 --- a/dts/src/arm/imx6qdl-nit6xlite.dtsi +++ b/dts/src/arm/imx6qdl-nit6xlite.dtsi @@ -97,15 +97,6 @@ }; }; - bt_rfkill { - compatible = "rfkill-gpio"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_bt_rfkill>; - gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; - name = "bt_rfkill"; - type = <2>; - }; - gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -160,7 +151,7 @@ }; }; - backlight_lcd { + backlight-lcd { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -169,7 +160,7 @@ status = "okay"; }; - backlight_lvds0: backlight_lvds0 { + backlight_lvds0: backlight-lvds0 { compatible = "pwm-backlight"; pwms = <&pwm4 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -178,7 +169,7 @@ status = "okay"; }; - panel_lvds0 { + panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds0>; @@ -328,19 +319,6 @@ >; }; - pinctrl_bt_rfkill: bt_rfkillgrp { - fsl,pins = < - /* BT wake */ - MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 - /* BT reset */ - MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b0 - /* BT reg en */ - MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 - /* BT host wake irq */ - MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b0 - >; - }; - pinctrl_ecspi1: ecspi1grp { fsl,pins = < MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 @@ -374,7 +352,7 @@ >; }; - pinctrl_gpio_keys: gpio_keysgrp { + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < /* Home Button: J14 pin 5 */ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 @@ -457,7 +435,7 @@ >; }; - pinctrl_wlan_vmmc: wlan_vmmcgrp { + pinctrl_wlan_vmmc: wlan-vmmcgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0 >; diff --git a/dts/src/arm/imx6qdl-nitrogen6_max.dtsi b/dts/src/arm/imx6qdl-nitrogen6_max.dtsi index b0b3220a1f..34887a10c5 100644 --- a/dts/src/arm/imx6qdl-nitrogen6_max.dtsi +++ b/dts/src/arm/imx6qdl-nitrogen6_max.dtsi @@ -229,7 +229,7 @@ }; }; - backlight_lcd: backlight_lcd { + backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -238,7 +238,7 @@ status = "okay"; }; - backlight_lvds0: backlight_lvds0 { + backlight_lvds0: backlight-lvds0 { compatible = "pwm-backlight"; pwms = <&pwm4 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -247,7 +247,7 @@ status = "okay"; }; - backlight_lvds1: backlight_lvds1 { + backlight_lvds1: backlight-lvds1 { compatible = "pwm-backlight"; pwms = <&pwm2 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -282,7 +282,7 @@ }; }; - panel_lcd { + panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; @@ -293,7 +293,7 @@ }; }; - panel_lvds0 { + panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds0>; @@ -304,7 +304,7 @@ }; }; - panel_lvds1 { + panel-lvds1 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds1>; @@ -447,7 +447,7 @@ }; &iomuxc { - imx6q-nitrogen6_max { + imx6q-nitrogen6-max { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 @@ -504,7 +504,7 @@ >; }; - pinctrl_gpio_keys: gpio_keysgrp { + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < /* Power Button */ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 @@ -720,7 +720,7 @@ >; }; - pinctrl_wlan_vmmc: wlan_vmmcgrp { + pinctrl_wlan_vmmc: wlan-vmmcgrp { fsl,pins = < MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 diff --git a/dts/src/arm/imx6qdl-nitrogen6_som2.dtsi b/dts/src/arm/imx6qdl-nitrogen6_som2.dtsi new file mode 100644 index 0000000000..d80f21abea --- /dev/null +++ b/dts/src/arm/imx6qdl-nitrogen6_som2.dtsi @@ -0,0 +1,770 @@ +/* + * Copyright 2016 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + backlight_lcd: backlight-lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds0: backlight-lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds1: backlight-lvds1 { + compatible = "gpio-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight_lvds1>; + gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; + default-on; + status = "okay"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + wakeup-source; + }; + + menu { + label = "Menu"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + }; + + home { + label = "Home"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + back { + label = "Back"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j15>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel-lcd { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + panel-lvds0 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds0>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + panel-lvds1 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds1>; + + port { + panel_in_lvds1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + + reg_1p8v: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p5v: regulator-2v5 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_can_xcvr: regulator-can-xcvr { + compatible = "regulator-fixed"; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_xcvr>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator-wlan-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-nitrogen6_som2-sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + rtc@68 { + compatible = "st,rv4162"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rv4162>; + reg = <0x68>; + interrupts-extended = <&gpio6 7 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&iomuxc { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_backlight_lvds1: backlight-lvds1grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x0b0b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = < + /* Flexcan XCVR enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x130b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x030b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_gpio_keys: gpio-keysgrp { + fsl,pins = < + /* Power Button */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + /* Menu Button */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + /* Home Button */ + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + /* Back Button */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* Volume Up Button */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Volume Down Button */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_i2c3mux: i2c3muxgrp { + fsl,pins = < + /* PCIe I2C enable */ + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0 + >; + }; + + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + /* PCIe reset */ + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x030b0 + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x030b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x030b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x030b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x030b1 + >; + }; + + pinctrl_rv4162: rv4162grp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x130b0 + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x130b0 + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x030b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x030b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10071 + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17071 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17071 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17071 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17071 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17071 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_wlan_vmmc: wlan-vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x030b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x030b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in_lvds1>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wlan_vmmc>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + vmmc-supply = <®_1p8v>; + keep-power-in-suspend; + status = "okay"; +}; diff --git a/dts/src/arm/imx6qdl-nitrogen6x.dtsi b/dts/src/arm/imx6qdl-nitrogen6x.dtsi index db868bc42c..e476d01959 100644 --- a/dts/src/arm/imx6qdl-nitrogen6x.dtsi +++ b/dts/src/arm/imx6qdl-nitrogen6x.dtsi @@ -167,7 +167,7 @@ mux-ext-port = <3>; }; - backlight_lcd: backlight_lcd { + backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -176,7 +176,7 @@ status = "okay"; }; - backlight_lvds: backlight_lvds { + backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; pwms = <&pwm4 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -211,7 +211,7 @@ }; }; - lcd_panel { + panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; @@ -222,7 +222,7 @@ }; }; - panel { + panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; @@ -413,7 +413,7 @@ >; }; - pinctrl_gpio_keys: gpio_keysgrp { + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < /* Power Button */ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 @@ -561,7 +561,7 @@ >; }; - pinctrl_wlan_vmmc: wlan_vmmcgrp { + pinctrl_wlan_vmmc: wlan-vmmcgrp { fsl,pins = < MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 diff --git a/dts/src/arm/imx6qdl-phytec-pfla02.dtsi b/dts/src/arm/imx6qdl-phytec-pfla02.dtsi index e0280cac24..e9801a26f3 100644 --- a/dts/src/arm/imx6qdl-phytec-pfla02.dtsi +++ b/dts/src/arm/imx6qdl-phytec-pfla02.dtsi @@ -427,10 +427,10 @@ }; &usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3 + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_cdwp>; cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; - status = "disabled"; + status = "disabled"; }; diff --git a/dts/src/arm/imx6qdl-sabreauto.dtsi b/dts/src/arm/imx6qdl-sabreauto.dtsi index e000e6f12b..52390ba83e 100644 --- a/dts/src/arm/imx6qdl-sabreauto.dtsi +++ b/dts/src/arm/imx6qdl-sabreauto.dtsi @@ -283,7 +283,7 @@ VD-supply = <®_audio>; VLS-supply = <®_audio>; VLC-supply = <®_audio>; - }; + }; }; @@ -613,8 +613,6 @@ &weim { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>; - #address-cells = <2>; - #size-cells = <1>; ranges = <0 0 0x08000000 0x08000000>; status = "disabled"; /* pin conflict with SPI NOR */ diff --git a/dts/src/arm/imx6qdl-sabrelite.dtsi b/dts/src/arm/imx6qdl-sabrelite.dtsi index 81dd6cd193..1f9076e271 100644 --- a/dts/src/arm/imx6qdl-sabrelite.dtsi +++ b/dts/src/arm/imx6qdl-sabrelite.dtsi @@ -153,7 +153,7 @@ mux-ext-port = <4>; }; - backlight_lcd: backlight_lcd { + backlight_lcd: backlight-lcd { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -162,7 +162,7 @@ status = "okay"; }; - backlight_lvds: backlight_lvds { + backlight_lvds: backlight-lvds { compatible = "pwm-backlight"; pwms = <&pwm4 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -197,7 +197,7 @@ }; }; - lcd_panel { + panel-lcd { compatible = "okaya,rs800480t-7x0gp"; backlight = <&backlight_lcd>; @@ -208,7 +208,7 @@ }; }; - panel { + panel-lvds0 { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; @@ -378,7 +378,7 @@ >; }; - pinctrl_gpio_keys: gpio_keysgrp { + pinctrl_gpio_keys: gpio-keysgrp { fsl,pins = < /* Power Button */ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 diff --git a/dts/src/arm/imx6qdl-sabresd.dtsi b/dts/src/arm/imx6qdl-sabresd.dtsi index 8e9e0d98db..55ef53571f 100644 --- a/dts/src/arm/imx6qdl-sabresd.dtsi +++ b/dts/src/arm/imx6qdl-sabresd.dtsi @@ -129,8 +129,8 @@ pinctrl-0 = <&pinctrl_gpio_leds>; red { - gpios = <&gpio1 2 0>; - default-state = "on"; + gpios = <&gpio1 2 0>; + default-state = "on"; }; }; diff --git a/dts/src/arm/imx6qdl-tx6.dtsi b/dts/src/arm/imx6qdl-tx6.dtsi index ac9529f855..2bf2e623ac 100644 --- a/dts/src/arm/imx6qdl-tx6.dtsi +++ b/dts/src/arm/imx6qdl-tx6.dtsi @@ -429,8 +429,8 @@ pinctrl_edt_ft5x06: edt-ft5x06grp { fsl,pins = < MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* Interrupt */ - MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /* Reset */ - MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 /* Wake */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /* Reset */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 /* Wake */ >; }; @@ -481,21 +481,21 @@ pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 >; }; diff --git a/dts/src/arm/imx6qdl-wandboard-revb1.dtsi b/dts/src/arm/imx6qdl-wandboard-revb1.dtsi index ef7fa62b98..a320891322 100644 --- a/dts/src/arm/imx6qdl-wandboard-revb1.dtsi +++ b/dts/src/arm/imx6qdl-wandboard-revb1.dtsi @@ -28,7 +28,7 @@ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 /* RGMII_nRST */ MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x80000000 /* BT_ON */ MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x80000000 /* BT_WAKE */ - MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x80000000 /* BT_HOST_WAKE */ + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x80000000 /* BT_HOST_WAKE */ >; }; }; diff --git a/dts/src/arm/imx6qdl-wandboard.dtsi b/dts/src/arm/imx6qdl-wandboard.dtsi index 2b9c2be436..82dc5744ae 100644 --- a/dts/src/arm/imx6qdl-wandboard.dtsi +++ b/dts/src/arm/imx6qdl-wandboard.dtsi @@ -129,8 +129,8 @@ pinctrl_i2c1: i2c1grp { fsl,pins = < - MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 >; }; diff --git a/dts/src/arm/imx6qdl.dtsi b/dts/src/arm/imx6qdl.dtsi index b13b0b2db8..53e6e63cbb 100644 --- a/dts/src/arm/imx6qdl.dtsi +++ b/dts/src/arm/imx6qdl.dtsi @@ -13,9 +13,10 @@ #include <dt-bindings/clock/imx6qdl-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -#include "skeleton.dtsi" - / { + #address-cells = <1>; + #size-cells = <1>; + aliases { ethernet0 = &fec; can0 = &can1; @@ -204,9 +205,9 @@ #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_PCIE_AXI>, <&clks IMX6QDL_CLK_LVDS1_GATE>, <&clks IMX6QDL_CLK_PCIE_REF_125M>; @@ -1092,10 +1093,13 @@ }; weim: weim@021b8000 { + #address-cells = <2>; + #size-cells = <1>; compatible = "fsl,imx6q-weim"; reg = <0x021b8000 0x4000>; interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_EIM_SLOW>; + fsl,weim-cs-gpr = <&gpr>; }; ocotp: ocotp@021bc000 { diff --git a/dts/src/arm/imx6qp.dtsi b/dts/src/arm/imx6qp.dtsi index 886dbf2eca..0d4977ab7d 100644 --- a/dts/src/arm/imx6qp.dtsi +++ b/dts/src/arm/imx6qp.dtsi @@ -85,5 +85,22 @@ pcie: pcie@0x01000000 { compatible = "fsl,imx6qp-pcie", "snps,dw-pcie"; }; + + aips-bus@02100000 { + mmdc0: mmdc@021b0000 { /* MMDC0 */ + compatible = "fsl,imx6qp-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + }; }; }; + +&ldb { + clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>, + <&clks IMX6QDL_CLK_LDB_DI0_PODF>, <&clks IMX6QDL_CLK_LDB_DI1_PODF>; + clock-names = "di0_pll", "di1_pll", + "di0_sel", "di1_sel", "di2_sel", "di3_sel", + "di0", "di1"; +}; diff --git a/dts/src/arm/imx6sl.dtsi b/dts/src/arm/imx6sl.dtsi index 02378db3f5..4fd6de29f0 100644 --- a/dts/src/arm/imx6sl.dtsi +++ b/dts/src/arm/imx6sl.dtsi @@ -8,11 +8,13 @@ */ #include <dt-bindings/interrupt-controller/irq.h> -#include "skeleton.dtsi" #include "imx6sl-pinfunc.h" #include <dt-bindings/clock/imx6sl-clock.h> / { + #address-cells = <1>; + #size-cells = <1>; + aliases { ethernet0 = &fec; gpio0 = &gpio1; @@ -893,8 +895,11 @@ }; weim: weim@021b8000 { + #address-cells = <2>; + #size-cells = <1>; reg = <0x021b8000 0x4000>; interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; + fsl,weim-cs-gpr = <&gpr>; }; ocotp: ocotp@021bc000 { diff --git a/dts/src/arm/imx6sx-sdb.dtsi b/dts/src/arm/imx6sx-sdb.dtsi index 9d70cfd40a..da815527a7 100644 --- a/dts/src/arm/imx6sx-sdb.dtsi +++ b/dts/src/arm/imx6sx-sdb.dtsi @@ -192,10 +192,10 @@ }; &i2c4 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c4>; - status = "okay"; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; codec: wm8962@1a { compatible = "wlf,wm8962"; @@ -290,6 +290,14 @@ status = "okay"; }; +&usbphy1 { + fsl,tx-d-cal = <106>; +}; + +&usbphy2 { + fsl,tx-d-cal = <106>; +}; + &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; diff --git a/dts/src/arm/imx6sx-udoo-neo-basic.dts b/dts/src/arm/imx6sx-udoo-neo-basic.dts new file mode 100644 index 0000000000..0c1fc1a8f9 --- /dev/null +++ b/dts/src/arm/imx6sx-udoo-neo-basic.dts @@ -0,0 +1,69 @@ +/* + * Copyright (c) 2016 Andreas Färber + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6sx-udoo-neo.dtsi" + +/ { + model = "UDOO Neo Basic"; + compatible = "udoo,neobasic", "fsl,imx6sx"; + + memory { + reg = <0x80000000 0x20000000>; + }; +}; + +&fec1 { + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; diff --git a/dts/src/arm/imx6sx-udoo-neo-extended.dts b/dts/src/arm/imx6sx-udoo-neo-extended.dts new file mode 100644 index 0000000000..5d6c2274ee --- /dev/null +++ b/dts/src/arm/imx6sx-udoo-neo-extended.dts @@ -0,0 +1,54 @@ +/* + * Copyright (c) 2016 Andreas Färber + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6sx-udoo-neo.dtsi" + +/ { + model = "UDOO Neo Extended"; + compatible = "udoo,neoextended", "fsl,imx6sx"; + + memory { + reg = <0x80000000 0x40000000>; + }; +}; diff --git a/dts/src/arm/imx6sx-udoo-neo-full.dts b/dts/src/arm/imx6sx-udoo-neo-full.dts new file mode 100644 index 0000000000..653ceb29e2 --- /dev/null +++ b/dts/src/arm/imx6sx-udoo-neo-full.dts @@ -0,0 +1,69 @@ +/* + * Copyright (c) 2016 Andreas Färber + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6sx-udoo-neo.dtsi" + +/ { + model = "UDOO Neo Full"; + compatible = "udoo,neofull", "fsl,imx6sx"; + + memory { + reg = <0x80000000 0x40000000>; + }; +}; + +&fec1 { + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + }; +}; diff --git a/dts/src/arm/imx6sx-udoo-neo.dtsi b/dts/src/arm/imx6sx-udoo-neo.dtsi new file mode 100644 index 0000000000..2b65d26f43 --- /dev/null +++ b/dts/src/arm/imx6sx-udoo-neo.dtsi @@ -0,0 +1,293 @@ +/* + * Copyright (c) 2016 Andreas Färber + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6sx.dtsi" + +/ { + compatible = "fsl,imx6sx"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + red { + label = "udoo-neo:red:mmc"; + gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + + orange { + label = "udoo-neo:orange:user"; + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + reg_sdio_pwr: regulator-sdio-pwr { + compatible = "regulator-fixed"; + gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-name = "SDIO_PWR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; + soc-supply = <&sw1c_reg>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <100000>; + status = "okay"; + + pmic: pmic@08 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = + <MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0xa0b1>, + <MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1>, + <MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1>, + <MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1>, + <MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1>, + <MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1>, + + <MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x3081>, + <MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x3081>, + <MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081>, + <MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081>, + <MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081>, + <MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER 0x3081>, + + <MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91>; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1>, + <MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1>; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>, + <MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1>; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = + <MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1>, + <MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1>; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = + <MX6SX_PAD_SD4_DATA4__UART5_RX 0x1b0b1>, + <MX6SX_PAD_SD4_DATA5__UART5_TX 0x1b0b1>; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = + <MX6SX_PAD_CSI_DATA00__UART6_RI_B 0x1b0b1>, + <MX6SX_PAD_CSI_DATA01__UART6_DSR_B 0x1b0b1>, + <MX6SX_PAD_CSI_DATA02__UART6_DTR_B 0x1b0b1>, + <MX6SX_PAD_CSI_DATA03__UART6_DCD_B 0x1b0b1>, + <MX6SX_PAD_CSI_DATA04__UART6_RX 0x1b0b1>, + <MX6SX_PAD_CSI_DATA05__UART6_TX 0x1b0b1>, + <MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x1b0b1>, + <MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x1b0b1>; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = + <MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059>, + <MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059>, + <MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059>, + <MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059>, + <MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059>, + <MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059>, + <MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059>; /* CD */ + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* Cortex-M4 serial */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "disabled"; +}; + +/* Arduino serial */ +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "disabled"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart6>; + uart-has-rtscts; + status = "disabled"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vmmc-supply = <®_sdio_pwr>; + bus-width = <4>; + cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; diff --git a/dts/src/arm/imx6sx.dtsi b/dts/src/arm/imx6sx.dtsi index 1a473e83ef..076a30f9bc 100644 --- a/dts/src/arm/imx6sx.dtsi +++ b/dts/src/arm/imx6sx.dtsi @@ -11,9 +11,11 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "imx6sx-pinfunc.h" -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + aliases { can0 = &flexcan1; can1 = &flexcan2; @@ -858,7 +860,7 @@ fsl,num-tx-queues=<3>; fsl,num-rx-queues=<3>; status = "disabled"; - }; + }; mlb: mlb@0218c000 { reg = <0x0218c000 0x4000>; @@ -968,10 +970,13 @@ }; weim: weim@021b8000 { + #address-cells = <2>; + #size-cells = <1>; compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim"; reg = <0x021b8000 0x4000>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SX_CLK_EIM_SLOW>; + fsl,weim-cs-gpr = <&gpr>; }; ocotp: ocotp@021bc000 { @@ -1143,7 +1148,7 @@ lcdif1: lcdif@02220000 { compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02220000 0x4000>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 5 IRQ_TYPE_EDGE_RISING>; clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, <&clks IMX6SX_CLK_LCDIF_APB>, <&clks IMX6SX_CLK_DISPLAY_AXI>; @@ -1154,7 +1159,7 @@ lcdif2: lcdif@02224000 { compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif"; reg = <0x02224000 0x4000>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 6 IRQ_TYPE_EDGE_RISING>; clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>, <&clks IMX6SX_CLK_LCDIF_APB>, <&clks IMX6SX_CLK_DISPLAY_AXI>; @@ -1181,7 +1186,7 @@ fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>; status = "disabled"; - }; + }; adc2: adc@02284000 { compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; @@ -1192,7 +1197,7 @@ fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>; status = "disabled"; - }; + }; wdog3: wdog@02288000 { compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; diff --git a/dts/src/arm/imx6ul-14x14-evk.dts b/dts/src/arm/imx6ul-14x14-evk.dts index e281d5087d..00f98e5bfc 100644 --- a/dts/src/arm/imx6ul-14x14-evk.dts +++ b/dts/src/arm/imx6ul-14x14-evk.dts @@ -225,7 +225,7 @@ }; &usbotg1 { - dr_mode = "peripheral"; + dr_mode = "otg"; status = "okay"; }; @@ -235,6 +235,14 @@ status = "okay"; }; +&usbphy1 { + fsl,tx-d-cal = <106>; +}; + +&usbphy2 { + fsl,tx-d-cal = <106>; +}; + &usdhc1 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; diff --git a/dts/src/arm/imx6ul-liteboard.dts b/dts/src/arm/imx6ul-liteboard.dts new file mode 100644 index 0000000000..6e04cb9202 --- /dev/null +++ b/dts/src/arm/imx6ul-liteboard.dts @@ -0,0 +1,147 @@ +/* + * Copyright 2016 Grinn + * + * Author: Marcin Niestroj <m.niestroj@grinn-global.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6ul-litesom.dtsi" + +/ { + model = "Grinn i.MX6UL liteBoard"; + compatible = "grinn,imx6ul-liteboard", "grinn,imx6ul-litesom", + "fsl,imx6ul"; + + chosen { + stdout-path = &uart1; + }; + + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_vbus>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio2 8 GPIO_ACTIVE_LOW>; + }; +}; + +&iomuxc { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 + MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x17059 + MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059 + MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10071 + MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059 + MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059 + MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059 + MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059 + >; + }; + + pinctrl_usb_otg1_vbus: usb-otg1-vbus { + fsl,pins = < + MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x79 + >; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + no-1-8-v; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; diff --git a/dts/src/arm/imx6ul-litesom.dtsi b/dts/src/arm/imx6ul-litesom.dtsi new file mode 100644 index 0000000000..461292d334 --- /dev/null +++ b/dts/src/arm/imx6ul-litesom.dtsi @@ -0,0 +1,82 @@ +/* + * Copyright 2016 Grinn + * + * Author: Marcin Niestroj <m.niestroj@grinn-global.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6ul.dtsi" + +/ { + model = "Grinn i.MX6UL liteSOM"; + compatible = "grinn,imx6ul-litesom", "fsl,imx6ul"; + + memory { + reg = <0x80000000 0x20000000>; + }; +}; + +&iomuxc { + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x10069 + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059 + MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x17059 + >; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + no-1-8-v; + non-removable; + keep-power-in-suspend; + wakeup-source; + bus-width = <8>; + status = "okay"; +}; diff --git a/dts/src/arm/imx6ul.dtsi b/dts/src/arm/imx6ul.dtsi index c5c05fdccc..39845a7e04 100644 --- a/dts/src/arm/imx6ul.dtsi +++ b/dts/src/arm/imx6ul.dtsi @@ -11,9 +11,11 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "imx6ul-pinfunc.h" -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + aliases { ethernet0 = &fec1; ethernet1 = &fec2; diff --git a/dts/src/arm/imx6ull-14x14-evk.dts b/dts/src/arm/imx6ull-14x14-evk.dts new file mode 100644 index 0000000000..db5bc076e1 --- /dev/null +++ b/dts/src/arm/imx6ull-14x14-evk.dts @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6ul-14x14-evk.dts" + +/ { + model = "Freescale i.MX6 UlltraLite 14x14 EVK Board"; + compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull"; +}; + +&clks { + assigned-clocks = <&clks IMX6UL_CLK_PLL3_PFD2>; + assigned-clock-rates = <320000000>; +}; diff --git a/dts/src/arm/imx6ull-pinfunc.h b/dts/src/arm/imx6ull-pinfunc.h new file mode 100644 index 0000000000..1182023366 --- /dev/null +++ b/dts/src/arm/imx6ull-pinfunc.h @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __DTS_IMX6ULL_PINFUNC_H +#define __DTS_IMX6ULL_PINFUNC_H + +#include "imx6ul-pinfunc.h" +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6ULL_PAD_ENET2_RX_DATA0__EPDC_SDDO08 0x00E4 0x0370 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_RX_DATA1__EPDC_SDDO09 0x00E8 0x0374 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_RX_EN__EPDC_SDDO10 0x00EC 0x0378 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_TX_DATA0__EPDC_SDDO11 0x00F0 0x037C 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_TX_DATA1__EPDC_SDDO12 0x00F4 0x0380 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_TX_EN__EPDC_SDDO13 0x00F8 0x0384 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_TX_CLK__EPDC_SDDO14 0x00FC 0x0388 0x0000 0x9 0x0 +#define MX6ULL_PAD_ENET2_RX_ER__EPDC_SDDO15 0x0100 0x038C 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_CLK__EPDC_SDCLK 0x0104 0x0390 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_ENABLE__EPDC_SDLE 0x0108 0x0394 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_HSYNC__EPDC_SDOE 0x010C 0x0398 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_VSYNC__EPDC_SDCE0 0x0110 0x039C 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_RESET__EPDC_GDOE 0x0114 0x03A0 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA00__EPDC_SDDO00 0x0118 0x03A4 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA01__EPDC_SDDO01 0x011C 0x03A8 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA02__EPDC_SDDO02 0x0120 0x03AC 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA03__EPDC_SDDO03 0x0124 0x03B0 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA04__EPDC_SDDO04 0x0128 0x03B4 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA05__EPDC_SDDO05 0x012C 0x03B8 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA06__EPDC_SDDO06 0x0130 0x03BC 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA07__EPDC_SDDO07 0x0134 0x03C0 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA14__EPDC_SDSHR 0x0150 0x03DC 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA15__EPDC_GDRL 0x0154 0x03E0 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA16__EPDC_GDCLK 0x0158 0x03E4 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA17__EPDC_GDSP 0x015C 0x03E8 0x0000 0x9 0x0 +#define MX6ULL_PAD_LCD_DATA21__EPDC_SDCE1 0x016C 0x03F8 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_MCLK__ESAI_TX3_RX2 0x01D4 0x0460 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_PIXCLK__ESAI_TX2_RX3 0x01D8 0x0464 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_VSYNC__ESAI_TX4_RX1 0x01DC 0x0468 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_HSYNC__ESAI_TX1 0x01E0 0x046C 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA00__ESAI_TX_HF_CLK 0x01E4 0x0470 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA01__ESAI_RX_HF_CLK 0x01E8 0x0474 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA02__ESAI_RX_FS 0x01EC 0x0478 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA03__ESAI_RX_CLK 0x01F0 0x047C 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA04__ESAI_TX_FS 0x01F4 0x0480 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA05__ESAI_TX_CLK 0x01F8 0x0484 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA06__ESAI_TX5_RX0 0x01FC 0x0488 0x0000 0x9 0x0 +#define MX6ULL_PAD_CSI_DATA07__ESAI_T0 0x0200 0x048C 0x0000 0x9 0x0 + +#endif /* __DTS_IMX6ULL_PINFUNC_H */ diff --git a/dts/src/arm/imx6ull.dtsi b/dts/src/arm/imx6ull.dtsi new file mode 100644 index 0000000000..dee8ab8135 --- /dev/null +++ b/dts/src/arm/imx6ull.dtsi @@ -0,0 +1,43 @@ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx6ul.dtsi" +#include "imx6ull-pinfunc.h" diff --git a/dts/src/arm/imx7d-pinfunc.h b/dts/src/arm/imx7d-pinfunc.h index 3f9f0d9c80..7bc3c00e56 100644 --- a/dts/src/arm/imx7d-pinfunc.h +++ b/dts/src/arm/imx7d-pinfunc.h @@ -43,26 +43,30 @@ #define MX7D_PAD_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0 #define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1 #define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1 -#define MX7D_PAD_GPIO1_IO04__UART5_CTS_B 0x0010 0x0040 0x0710 0x3 0x4 +#define MX7D_PAD_GPIO1_IO04__UART5_DCE_CTS 0x0010 0x0040 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO04__UART5_DTE_RTS 0x0010 0x0040 0x0710 0x3 0x4 #define MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2 #define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0 #define MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0 #define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0 #define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1 -#define MX7D_PAD_GPIO1_IO05__UART5_RTS_B 0x0014 0x0044 0x0710 0x3 0x5 +#define MX7D_PAD_GPIO1_IO05__UART5_DCE_RTS 0x0014 0x0044 0x0710 0x3 0x5 +#define MX7D_PAD_GPIO1_IO05__UART5_DTE_CTS 0x0014 0x0044 0x0000 0x3 0x0 #define MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2 #define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0 #define MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0 #define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1 #define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1 -#define MX7D_PAD_GPIO1_IO06__UART5_RX_DATA 0x0018 0x0048 0x0714 0x3 0x4 +#define MX7D_PAD_GPIO1_IO06__UART5_DCE_RX 0x0018 0x0048 0x0714 0x3 0x4 +#define MX7D_PAD_GPIO1_IO06__UART5_DTE_TX 0x0018 0x0048 0x0000 0x3 0x0 #define MX7D_PAD_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2 #define MX7D_PAD_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0 #define MX7D_PAD_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1 #define MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0 #define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0 #define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1 -#define MX7D_PAD_GPIO1_IO07__UART5_TX_DATA 0x001C 0x004C 0x0714 0x3 0x5 +#define MX7D_PAD_GPIO1_IO07__UART5_DCE_TX 0x001C 0x004C 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO07__UART5_DTE_RX 0x001C 0x004C 0x0714 0x3 0x5 #define MX7D_PAD_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2 #define MX7D_PAD_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0 #define MX7D_PAD_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1 diff --git a/dts/src/arm/imx7s.dtsi b/dts/src/arm/imx7s.dtsi index 2b6cb05bc0..8ff2cbdd8f 100644 --- a/dts/src/arm/imx7s.dtsi +++ b/dts/src/arm/imx7s.dtsi @@ -46,9 +46,11 @@ #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "imx7d-pinfunc.h" -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + aliases { gpio0 = &gpio1; gpio1 = &gpio2; diff --git a/dts/src/arm/integratorap.dts b/dts/src/arm/integratorap.dts index 6f16d09dc5..e8b249f92f 100644 --- a/dts/src/arm/integratorap.dts +++ b/dts/src/arm/integratorap.dts @@ -10,6 +10,41 @@ compatible = "arm,integrator-ap"; dma-ranges = <0x80000000 0x0 0x80000000>; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + /* + * Since the board has pluggable CPU modules, we + * cannot define a proper compatible here. Let the + * boot loader fill in the apropriate compatible + * string if necessary. + */ + /* compatible = "arm,arm926ej-s"; */ + reg = <0>; + /* + * The documentation in ARM DUI 0138E page 3-12 states + * that the maximum frequency for this clock is 200 MHz + * but painful trial-and-error has proved to me that it + * is actually just hanging the system above 71 MHz. + * Sad but true. + */ + /* kHz uV */ + operating-points = <71000 0 + 66000 0 + 60000 0 + 48000 0 + 36000 0 + 24000 0 + 12000 0>; + clocks = <&cmosc>; + clock-names = "cpu"; + clock-latency = <1000000>; /* 1 ms */ + }; + }; + aliases { arm,timer-primary = &timer2; arm,timer-secondary = &timer1; diff --git a/dts/src/arm/integratorcp.dts b/dts/src/arm/integratorcp.dts index 1b5e4b006b..97f38b57a7 100644 --- a/dts/src/arm/integratorcp.dts +++ b/dts/src/arm/integratorcp.dts @@ -13,6 +13,32 @@ bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk"; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + /* + * Since the board has pluggable CPU modules, we + * cannot define a proper compatible here. Let the + * boot loader fill in the apropriate compatible + * string if necessary. + */ + /* compatible = "arm,arm920t"; */ + reg = <0>; + /* + * TBD comment. + */ + /* kHz uV */ + operating-points = <50000 0 + 48000 0>; + clocks = <&cmcore>; + clock-names = "cpu"; + clock-latency = <1000000>; /* 1 ms */ + }; + }; + /* * The Integrator/CP overall clocking architecture can be found in * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which diff --git a/dts/src/arm/keystone-k2g.dtsi b/dts/src/arm/keystone-k2g.dtsi index 2919c51906..63c7cf0c6b 100644 --- a/dts/src/arm/keystone-k2g.dtsi +++ b/dts/src/arm/keystone-k2g.dtsi @@ -72,6 +72,7 @@ soc { #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; compatible = "ti,keystone","simple-bus"; ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; diff --git a/dts/src/arm/keystone-k2l.dtsi b/dts/src/arm/keystone-k2l.dtsi index 2ee3d0ac28..0c5e74e79b 100644 --- a/dts/src/arm/keystone-k2l.dtsi +++ b/dts/src/arm/keystone-k2l.dtsi @@ -59,6 +59,7 @@ reg = <0x02620690 0xc>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <2>; pinctrl-single,bit-per-mux; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x1>; diff --git a/dts/src/arm/kirkwood-topkick.dts b/dts/src/arm/kirkwood-topkick.dts index 1e9a72100a..330aada6d3 100644 --- a/dts/src/arm/kirkwood-topkick.dts +++ b/dts/src/arm/kirkwood-topkick.dts @@ -4,7 +4,7 @@ #include "kirkwood-6282.dtsi" / { - model = "Univeral Scientific Industrial Co. Topkick-1281P2"; + model = "Universal Scientific Industrial Co. Topkick-1281P2"; compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood"; memory { diff --git a/dts/src/arm/lpc32xx.dtsi b/dts/src/arm/lpc32xx.dtsi index b5841fab51..d81fe433e3 100644 --- a/dts/src/arm/lpc32xx.dtsi +++ b/dts/src/arm/lpc32xx.dtsi @@ -479,6 +479,8 @@ compatible = "nxp,lpc3220-pwm"; reg = <0x4005C000 0x4>; clocks = <&clk LPC32XX_CLK_PWM1>; + assigned-clocks = <&clk LPC32XX_CLK_PWM1>; + assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>; status = "disabled"; }; @@ -486,6 +488,8 @@ compatible = "nxp,lpc3220-pwm"; reg = <0x4005C004 0x4>; clocks = <&clk LPC32XX_CLK_PWM2>; + assigned-clocks = <&clk LPC32XX_CLK_PWM2>; + assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>; status = "disabled"; }; diff --git a/dts/src/arm/ls1021a.dtsi b/dts/src/arm/ls1021a.dtsi index 368e219342..282d854f43 100644 --- a/dts/src/arm/ls1021a.dtsi +++ b/dts/src/arm/ls1021a.dtsi @@ -47,6 +47,7 @@ #include "skeleton64.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "fsl,ls1021a"; @@ -70,14 +71,15 @@ #address-cells = <1>; #size-cells = <0>; - cpu@f00 { + cpu0: cpu@f00 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0xf00>; clocks = <&cluster1_clk>; + #cooling-cells = <2>; }; - cpu@f01 { + cpu1: cpu@f01 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0xf01>; @@ -251,6 +253,84 @@ }; }; + tmu: tmu@1f00000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f00000 0x0 0x10000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>; + fsl,tmu-calibration = <0x00000000 0x0000000f + 0x00000001 0x00000017 + 0x00000002 0x0000001e + 0x00000003 0x00000026 + 0x00000004 0x0000002e + 0x00000005 0x00000035 + 0x00000006 0x0000003d + 0x00000007 0x00000044 + 0x00000008 0x0000004c + 0x00000009 0x00000053 + 0x0000000a 0x0000005b + 0x0000000b 0x00000064 + + 0x00010000 0x00000011 + 0x00010001 0x0000001c + 0x00010002 0x00000024 + 0x00010003 0x0000002b + 0x00010004 0x00000034 + 0x00010005 0x00000039 + 0x00010006 0x00000042 + 0x00010007 0x0000004c + 0x00010008 0x00000051 + 0x00010009 0x0000005a + 0x0001000a 0x00000063 + + 0x00020000 0x00000013 + 0x00020001 0x00000019 + 0x00020002 0x00000024 + 0x00020003 0x0000002c + 0x00020004 0x00000035 + 0x00020005 0x0000003d + 0x00020006 0x00000046 + 0x00020007 0x00000050 + 0x00020008 0x00000059 + + 0x00030000 0x00000002 + 0x00030001 0x0000000d + 0x00030002 0x00000019 + 0x00030003 0x00000024>; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + dspi0: dspi@2100000 { compatible = "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; diff --git a/dts/src/arm/mps2-an385.dts b/dts/src/arm/mps2-an385.dts index 31c374d72a..aebbebfc25 100644 --- a/dts/src/arm/mps2-an385.dts +++ b/dts/src/arm/mps2-an385.dts @@ -59,7 +59,7 @@ stdout-path = "serial0:9600n8"; }; - memory { + memory@21000000 { device_type = "memory"; reg = <0x21000000 0x1000000>; }; diff --git a/dts/src/arm/mps2-an399.dts b/dts/src/arm/mps2-an399.dts index 5e7e5ca2ed..349abf70b2 100644 --- a/dts/src/arm/mps2-an399.dts +++ b/dts/src/arm/mps2-an399.dts @@ -59,7 +59,7 @@ stdout-path = "serial0:9600n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x1000000>; }; diff --git a/dts/src/arm/mps2.dtsi b/dts/src/arm/mps2.dtsi index efb8a03cb9..2346739055 100644 --- a/dts/src/arm/mps2.dtsi +++ b/dts/src/arm/mps2.dtsi @@ -42,10 +42,12 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" #include "armv7-m.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + oscclk0: clk-osc0 { compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/dts/src/arm/mt2701.dtsi b/dts/src/arm/mt2701.dtsi index 18596a2c58..7eab6f4c46 100644 --- a/dts/src/arm/mt2701.dtsi +++ b/dts/src/arm/mt2701.dtsi @@ -12,8 +12,10 @@ * GNU General Public License for more details. */ +#include <dt-bindings/clock/mt2701-clk.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/mt2701-resets.h> #include "skeleton64.dtsi" #include "mt2701-pinfunc.h" @@ -71,10 +73,18 @@ #clock-cells = <0>; }; - uart_clk: dummy26m { + clk26m: oscillator@0 { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <26000000>; + clock-output-names = "clk26m"; + }; + + rtc32k: oscillator@1 { + compatible = "fixed-clock"; #clock-cells = <0>; + clock-frequency = <32000>; + clock-output-names = "rtc32k"; }; timer { @@ -104,6 +114,26 @@ reg = <0 0x10005000 0 0x1000>; }; + topckgen: syscon@10000000 { + compatible = "mediatek,mt2701-topckgen", "syscon"; + reg = <0 0x10000000 0 0x1000>; + #clock-cells = <1>; + }; + + infracfg: syscon@10001000 { + compatible = "mediatek,mt2701-infracfg", "syscon"; + reg = <0 0x10001000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pericfg: syscon@10003000 { + compatible = "mediatek,mt2701-pericfg", "syscon"; + reg = <0 0x10003000 0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + watchdog: watchdog@10007000 { compatible = "mediatek,mt2701-wdt", "mediatek,mt6589-wdt"; @@ -128,6 +158,12 @@ reg = <0 0x10200100 0 0x1c>; }; + apmixedsys: syscon@10209000 { + compatible = "mediatek,mt2701-apmixedsys", "syscon"; + reg = <0 0x10209000 0 0x1000>; + #clock-cells = <1>; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a7-gic"; interrupt-controller; @@ -144,7 +180,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x400>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -153,7 +190,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11003000 0 0x400>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -162,7 +200,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11004000 0 0x400>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>; + clock-names = "baud", "bus"; status = "disabled"; }; @@ -171,7 +210,8 @@ "mediatek,mt6577-uart"; reg = <0 0x11005000 0 0x400>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>; + clock-names = "baud", "bus"; status = "disabled"; }; }; diff --git a/dts/src/arm/omap2420.dtsi b/dts/src/arm/omap2420.dtsi index fb712b9aa8..aba542d63d 100644 --- a/dts/src/arm/omap2420.dtsi +++ b/dts/src/arm/omap2420.dtsi @@ -38,6 +38,7 @@ reg = <0x0 0x1000>; #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; ranges = <0 0x0 0x1000>; omap2420_pmx: pinmux@30 { @@ -46,6 +47,7 @@ reg = <0x30 0x0113>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; pinctrl-single,register-width = <8>; pinctrl-single,function-mask = <0x3f>; }; diff --git a/dts/src/arm/omap2430.dtsi b/dts/src/arm/omap2430.dtsi index 455aaea407..84635eeb99 100644 --- a/dts/src/arm/omap2430.dtsi +++ b/dts/src/arm/omap2430.dtsi @@ -38,6 +38,7 @@ reg = <0x2000 0x1000>; #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; ranges = <0 0x2000 0x1000>; omap2430_pmx: pinmux@30 { @@ -46,6 +47,7 @@ reg = <0x30 0x0154>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; pinctrl-single,register-width = <8>; pinctrl-single,function-mask = <0x3f>; }; diff --git a/dts/src/arm/omap3.dtsi b/dts/src/arm/omap3.dtsi index 353d818ce5..ecf5eb584c 100644 --- a/dts/src/arm/omap3.dtsi +++ b/dts/src/arm/omap3.dtsi @@ -106,6 +106,7 @@ reg = <0x30 0x238>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; @@ -145,6 +146,7 @@ reg = <0xa00 0x5c>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; diff --git a/dts/src/arm/omap34xx.dtsi b/dts/src/arm/omap34xx.dtsi index e41c52d3b1..834fdf1360 100644 --- a/dts/src/arm/omap34xx.dtsi +++ b/dts/src/arm/omap34xx.dtsi @@ -34,6 +34,7 @@ reg = <0x480025d8 0x24>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; diff --git a/dts/src/arm/omap36xx.dtsi b/dts/src/arm/omap36xx.dtsi index 718fa88407..d1a3e56b50 100644 --- a/dts/src/arm/omap36xx.dtsi +++ b/dts/src/arm/omap36xx.dtsi @@ -66,6 +66,7 @@ reg = <0x480025a0 0x5c>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; diff --git a/dts/src/arm/omap4-droid4-xt894.dts b/dts/src/arm/omap4-droid4-xt894.dts new file mode 100644 index 0000000000..f3ccb4ceed --- /dev/null +++ b/dts/src/arm/omap4-droid4-xt894.dts @@ -0,0 +1,188 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap443x.dtsi" + +/ { + model = "Motorola Droid 4 XT894"; + compatible = "motorola,droid4", "ti,omap4430", "ti,omap4"; + + chosen { + stdout-path = &uart3; + }; + + /* + * We seem to have only 1021 MB accessible, 1021 - 1022 is locked, + * then 1023 - 1024 seems to contain mbm. For SRAM, see the notes + * below about SRAM and L3_ICLK2 being unused by default, + */ + memory { + device_type = "memory"; + reg = <0x80000000 0x3fd00000>; /* 1021 MB */ + }; + + /* CPCAP really supports 1650000 to 3400000 range */ + vmmc: regulator-mmc { + compatible = "regulator-fixed"; + regulator-name = "vmmc"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + /* CPCAP really supports 3000000 to 3100000 range */ + vemmc: regulator-emmc { + compatible = "regulator-fixed"; + regulator-name = "vemmc"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + /* CPCAP really supports 1650000 to 1950000 range */ + wl12xx_vmmc: regulator-wl12xx { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */ +&gpmc { + status = "disabled"; +}; + +&mmc1 { + vmmc-supply = <&vmmc>; + bus-width = <4>; + cd-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */ +}; + +&mmc2 { + vmmc-supply = <&vemmc>; + bus-width = <8>; + non-removable; +}; + +&mmc3 { + vmmc-supply = <&wl12xx_vmmc>; + interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0xde>; + + non-removable; + bus-width = <4>; + cap-power-off-card; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1283"; + reg = <2>; + interrupt-parent = <&gpio4>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; /* gpio100 */ + ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; + }; +}; + +/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */ +&ocmcram { + status = "disabled"; +}; + +&omap4_pmx_core { + usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins { + /* gpio_60 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3) + >; + }; + + usb_ulpi_pins: pinmux_usb_ulpi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, MUX_MODE7) + OMAP4_IOPAD(0x198, MUX_MODE7) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0) + >; + }; + + /* usb0_otg_dp and usb0_otg_dm */ + usb_utmi_pins: pinmux_usb_utmi_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) + >; + }; + + /* uart3_tx_irtx and uart3_rx_irrx */ + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP4_IOPAD(0x196, MUX_MODE7) + OMAP4_IOPAD(0x198, MUX_MODE7) + OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1ba, MUX_MODE2) + OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2) + OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7) + OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7) + >; + }; +}; + +&omap4_pmx_wkup { + usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins { + /* gpio_wk0 */ + pinctrl-single,pins = < + OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3) + >; + }; +}; + +&uart3 { + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH + &omap4_pmx_core 0x17c>; +}; + +/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ +&usb_otg_hs { + interface-type = <1>; + mode = <3>; + power = <50>; +}; diff --git a/dts/src/arm/omap4.dtsi b/dts/src/arm/omap4.dtsi index 0ced079b7a..8087456b5f 100644 --- a/dts/src/arm/omap4.dtsi +++ b/dts/src/arm/omap4.dtsi @@ -184,6 +184,7 @@ reg = <0x40 0x0196>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; @@ -256,6 +257,7 @@ reg = <0x1e040 0x0038>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; diff --git a/dts/src/arm/omap5-uevm.dts b/dts/src/arm/omap5-uevm.dts index 53d31a87b4..a8c72611fb 100644 --- a/dts/src/arm/omap5-uevm.dts +++ b/dts/src/arm/omap5-uevm.dts @@ -27,12 +27,98 @@ default-state = "off"; }; }; + + evm_keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&evm_keys_pins>; + + #address-cells = <7>; + #size-cells = <0>; + + btn1 { + label = "BTN1"; + linux,code = <169>; + gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 */ + wakeup-source; + autorepeat; + debounce_interval = <50>; + }; + }; + + evm_leds { + compatible = "gpio-leds"; + + led1 { + label = "omap5:red:led"; + gpios = <&gpio9 17 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led2 { + label = "omap5:green:led"; + gpios = <&gpio9 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + led3 { + label = "omap5:blue:led"; + gpios = <&gpio9 19 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc2"; + default-state = "off"; + }; + + led4 { + label = "omap5:green:led1"; + gpios = <&gpio9 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led5 { + label = "omap5:green:led2"; + gpios = <&gpio9 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + default-state = "off"; + }; + + led6 { + label = "omap5:green:led3"; + gpios = <&gpio9 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led7 { + label = "omap5:green:led4"; + gpios = <&gpio9 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + default-state = "off"; + }; + + led8 { + label = "omap5:green:led5"; + gpios = <&gpio9 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; }; &hdmi { vdda-supply = <&ldo4_reg>; }; +&i2c1 { + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; +}; + &i2c5 { pinctrl-names = "default"; pinctrl-0 = <&i2c5_pins>; @@ -48,6 +134,12 @@ }; &omap5_pmx_core { + evm_keys_pins: pinmux_evm_keys_gpio_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0b6, PIN_INPUT | MUX_MODE6) /* gpio3_83 */ + >; + }; + i2c5_pins: pinmux_i2c5_pins { pinctrl-single,pins = < OMAP5_IOPAD(0x1c6, PIN_INPUT | MUX_MODE0) /* i2c5_scl */ diff --git a/dts/src/arm/omap5.dtsi b/dts/src/arm/omap5.dtsi index 25262118ec..968c67a49d 100644 --- a/dts/src/arm/omap5.dtsi +++ b/dts/src/arm/omap5.dtsi @@ -171,6 +171,7 @@ reg = <0x40 0x01b6>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; @@ -270,6 +271,7 @@ reg = <0xc840 0x003c>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; diff --git a/dts/src/arm/orion5x-lschl.dts b/dts/src/arm/orion5x-lschl.dts new file mode 100644 index 0000000000..9474092528 --- /dev/null +++ b/dts/src/arm/orion5x-lschl.dts @@ -0,0 +1,171 @@ +/* + * Device Tree file for Buffalo Linkstation LS-CHLv3 + * + * Copyright (C) 2016 Ash Hughes <ashley.hughes@blueyonder.co.uk> + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "orion5x-linkstation.dtsi" +#include "mvebu-linkstation-gpio-simple.dtsi" +#include "mvebu-linkstation-fan.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Buffalo Linkstation Live v3 (LS-CHL)"; + compatible = "buffalo,lschl", "marvell,orion5x-88f5182", "marvell,orion5x"; + + memory { /* 128 MB */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + gpio_keys { + func { + label = "Function Button"; + linux,code = <KEY_OPTION>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + power-on-switch { + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + power-auto-switch { + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + pinctrl-0 = <&pmx_led_power &pmx_led_alarm &pmx_led_info &pmx_led_func>; + blue-power-led { + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + + red-alarm-led { + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + amber-info-led { + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + + func { + label = "lschl:func:blue:top"; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_fan { + gpios = <&gpio0 14 GPIO_ACTIVE_LOW + &gpio0 16 GPIO_ACTIVE_LOW>; + + alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + }; +}; + +&pinctrl { + pmx_led_power: pmx-leds { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_led_alarm: pmx-leds { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; + + pmx_led_info: pmx-leds { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; + + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp8", "mpp10", "mpp15"; + marvell,function = "gpio"; + }; + + pmx_power_usb: pmx-power-usb { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + + pmx_led_func: pmx-leds { + marvell,pins = "mpp17"; + marvell,function = "gpio"; + }; + + pmx_sw_init: pmx-sw-init { + marvell,pins = "mpp7"; + marvell,function = "gpio"; + }; +}; + +&hdd_power { + gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; +}; + +&usb_power { + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; +}; + diff --git a/dts/src/arm/ox820.dtsi b/dts/src/arm/ox820.dtsi new file mode 100644 index 0000000000..e40f282a02 --- /dev/null +++ b/dts/src/arm/ox820.dtsi @@ -0,0 +1,296 @@ +/* + * ox820.dtsi - Device tree file for Oxford Semiconductor OX820 SoC + * + * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> + * + * Licensed under GPLv2 or later + */ + +/include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "oxsemi,ox820"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "oxsemi,ox820-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,arm11mpcore"; + clocks = <&armclk>; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,arm11mpcore"; + clocks = <&armclk>; + reg = <1>; + }; + }; + + memory { + /* Max 512MB @ 0x60000000 */ + reg = <0x60000000 0x20000000>; + }; + + clocks { + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + gmacclk: gmacclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + sysclk: sysclk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clocks = <&osc>; + }; + + plla: plla { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <850000000>; + }; + + armclk: armclk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clocks = <&plla>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + interrupt-parent = <&gic>; + + nandc: nand-controller@41000000 { + compatible = "oxsemi,ox820-nand"; + reg = <0x41000000 0x100000>; + clocks = <&stdclk 11>; + resets = <&reset 15>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + etha: ethernet@40400000 { + compatible = "oxsemi,ox820-dwmac", "snps,dwmac"; + reg = <0x40400000 0x2000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + mac-address = [000000000000]; /* Filled in by U-Boot */ + phy-mode = "rgmii"; + + clocks = <&stdclk 9>, <&gmacclk>; + clock-names = "gmac", "stmmaceth"; + resets = <&reset 6>; + + /* Regmap for sys registers */ + oxsemi,sys-ctrl = <&sys>; + + status = "disabled"; + }; + + apb-bridge@44000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x44000000 0x1000000>; + + pinctrl: pinctrl { + compatible = "oxsemi,ox820-pinctrl"; + + /* Regmap for sys registers */ + oxsemi,sys-ctrl = <&sys>; + + pinctrl_uart0: uart0 { + uart0 { + pins = "gpio30", "gpio31"; + function = "fct5"; + }; + }; + + pinctrl_uart0_modem: uart0_modem { + uart0_modem_a { + pins = "gpio24", "gpio24", "gpio26", "gpio27"; + function = "fct4"; + }; + uart0_modem_b { + pins = "gpio28", "gpio29"; + function = "fct5"; + }; + }; + + pinctrl_uart1: uart1 { + uart1 { + pins = "gpio7", "gpio8"; + function = "fct4"; + }; + }; + + pinctrl_uart1_modem: uart1_modem { + uart1_modem { + pins = "gpio5", "gpio6", "gpio40", "gpio41", "gpio42", "gpio43"; + function = "fct4"; + }; + }; + + pinctrl_etha_mdio: etha_mdio { + etha_mdio { + pins = "gpio3", "gpio4"; + function = "fct1"; + }; + }; + + pinctrl_nand: nand { + nand { + pins = "gpio12", "gpio13", "gpio14", "gpio15", + "gpio16", "gpio17", "gpio18", "gpio19", + "gpio20", "gpio21", "gpio22", "gpio23", + "gpio24"; + function = "fct1"; + }; + }; + }; + + gpio0: gpio@000000 { + compatible = "oxsemi,ox820-gpio"; + reg = <0x000000 0x100000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <32>; + oxsemi,gpio-bank = <0>; + gpio-ranges = <&pinctrl 0 0 32>; + }; + + gpio1: gpio@100000 { + compatible = "oxsemi,ox820-gpio"; + reg = <0x100000 0x100000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + ngpios = <18>; + oxsemi,gpio-bank = <1>; + gpio-ranges = <&pinctrl 0 32 18>; + }; + + uart0: serial@200000 { + compatible = "ns16550a"; + reg = <0x200000 0x100000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <0>; + fifo-size = <16>; + reg-io-width = <1>; + current-speed = <115200>; + no-loopback-test; + status = "disabled"; + clocks = <&sysclk>; + resets = <&reset 17>; + }; + + uart1: serial@300000 { + compatible = "ns16550a"; + reg = <0x200000 0x100000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <0>; + fifo-size = <16>; + reg-io-width = <1>; + current-speed = <115200>; + no-loopback-test; + status = "disabled"; + clocks = <&sysclk>; + resets = <&reset 18>; + }; + + rps@400000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x400000 0x100000>; + + intc: interrupt-controller@0 { + compatible = "oxsemi,ox820-rps-irq", "oxsemi,ox810se-rps-irq"; + interrupt-controller; + reg = <0 0x200>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + valid-mask = <0xFFFFFFFF>; + clear-mask = <0>; + }; + + timer0: timer@200 { + compatible = "oxsemi,ox820-rps-timer"; + reg = <0x200 0x40>; + clocks = <&sysclk>; + interrupt-parent = <&intc>; + interrupts = <4>; + }; + }; + + sys: sys-ctrl@e00000 { + compatible = "oxsemi,ox820-sys-ctrl", "syscon", "simple-mfd"; + reg = <0xe00000 0x200000>; + + reset: reset-controller { + compatible = "oxsemi,ox820-reset", "oxsemi,ox810se-reset"; + #reset-cells = <1>; + }; + + stdclk: stdclk { + compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk"; + #clock-cells = <1>; + }; + }; + }; + + apb-bridge@47000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x47000000 0x1000000>; + + scu: scu@0 { + compatible = "arm,arm11mp-scu"; + reg = <0x0 0x100>; + }; + + local-timer@600 { + compatible = "arm,arm11mp-twd-timer"; + reg = <0x600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>; + clocks = <&armclk>; + }; + + gic: gic@1000 { + compatible = "arm,arm11mp-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x1000 0x1000>, + <0x100 0x500>; + }; + }; + }; +}; diff --git a/dts/src/arm/pxa25x.dtsi b/dts/src/arm/pxa25x.dtsi new file mode 100644 index 0000000000..f9f4726396 --- /dev/null +++ b/dts/src/arm/pxa25x.dtsi @@ -0,0 +1,117 @@ +/* + * Copyright (C) 2016 Robert Jarzmik <robert.jarzmik@free.fr> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include "pxa2xx.dtsi" +#include "dt-bindings/clock/pxa-clock.h" + +/ { + model = "Marvell PXA25x family SoC"; + compatible = "marvell,pxa250"; + + clocks { + /* + * The muxing of external clocks/internal dividers for osc* clock + * sources has been hidden under the carpet by now. + */ + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clks: pxa2xx_clks@41300004 { + compatible = "marvell,pxa250-core-clocks"; + #clock-cells = <1>; + status = "okay"; + }; + + /* timer oscillator */ + clktimer: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3686400>; + clock-output-names = "ostimer"; + }; + }; + + pxabus { + pdma: dma-controller@40000000 { + compatible = "marvell,pdma-1.0"; + reg = <0x40000000 0x10000>; + interrupts = <25>; + #dma-channels = <16>; + #dma-cells = <2>; + #dma-requests = <40>; + status = "okay"; + }; + + pxairq: interrupt-controller@40d00000 { + marvell,intc-priority; + marvell,intc-nr-irqs = <32>; + }; + + pinctrl: pinctrl@40e00000 { + reg = <0x40e00054 0x20 0x40e0000c 0xc 0x40e0010c 4 + 0x40f00020 0x10>; + compatible = "marvell,pxa25x-pinctrl"; + }; + + gpio: gpio@40e00000 { + compatible = "intel,pxa25x-gpio"; + gpio-ranges = <&pinctrl 0 0 84>; + clocks = <&clks CLK_NONE>; + }; + + pwm0: pwm@40b00000 { + compatible = "marvell,pxa250-pwm"; + reg = <0x40b00000 0x10>; + #pwm-cells = <1>; + clocks = <&clks CLK_PWM0>; + }; + + pwm1: pwm@40b00010 { + compatible = "marvell,pxa250-pwm"; + reg = <0x40b00010 0x10>; + #pwm-cells = <1>; + clocks = <&clks CLK_PWM1>; + }; + }; + + timer@40a00000 { + compatible = "marvell,pxa-timer"; + reg = <0x40a00000 0x20>; + interrupts = <26>; + clocks = <&clktimer>; + status = "okay"; + }; + + pxa250_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp@99532800 { + opp-hz = /bits/ 64 <99532800>; + opp-microvolt = <1000000 950000 1650000>; + clock-latency-ns = <20>; + }; + opp@199065600 { + opp-hz = /bits/ 64 <199065600>; + opp-microvolt = <1000000 950000 1650000>; + clock-latency-ns = <20>; + }; + opp@298598400 { + opp-hz = /bits/ 64 <298598400>; + opp-microvolt = <1100000 1045000 1650000>; + clock-latency-ns = <20>; + }; + opp@398131200 { + opp-hz = /bits/ 64 <398131200>; + opp-microvolt = <1300000 1235000 1650000>; + clock-latency-ns = <20>; + }; + }; +}; diff --git a/dts/src/arm/pxa27x.dtsi b/dts/src/arm/pxa27x.dtsi index 9e73dc6b3e..e0fab48ba6 100644 --- a/dts/src/arm/pxa27x.dtsi +++ b/dts/src/arm/pxa27x.dtsi @@ -137,4 +137,44 @@ clocks = <&clks CLK_OSTIMER>; status = "okay"; }; + + pxa270_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp@104000000 { + opp-hz = /bits/ 64 <104000000>; + opp-microvolt = <900000 900000 1705000>; + clock-latency-ns = <20>; + }; + opp@156000000 { + opp-hz = /bits/ 64 <156000000>; + opp-microvolt = <1000000 1000000 1705000>; + clock-latency-ns = <20>; + }; + opp@208000000 { + opp-hz = /bits/ 64 <208000000>; + opp-microvolt = <1180000 1180000 1705000>; + clock-latency-ns = <20>; + }; + opp@312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <1250000 1250000 1705000>; + clock-latency-ns = <20>; + }; + opp@416000000 { + opp-hz = /bits/ 64 <416000000>; + opp-microvolt = <1350000 1350000 1705000>; + clock-latency-ns = <20>; + }; + opp@520000000 { + opp-hz = /bits/ 64 <520000000>; + opp-microvolt = <1450000 1450000 1705000>; + clock-latency-ns = <20>; + }; + opp@624000000 { + opp-hz = /bits/ 64 <624000000>; + opp-microvolt = <1550000 1550000 1705000>; + clock-latency-ns = <20>; + }; + }; }; diff --git a/dts/src/arm/pxa2xx.dtsi b/dts/src/arm/pxa2xx.dtsi index 3ff077ca44..e4ebcde178 100644 --- a/dts/src/arm/pxa2xx.dtsi +++ b/dts/src/arm/pxa2xx.dtsi @@ -54,8 +54,8 @@ reg = <0x40e00000 0x10000>; gpio-controller; #gpio-cells = <0x2>; - interrupts = <10>; - interrupt-names = "gpio_mux"; + interrupts = <8>, <9>, <10>; + interrupt-names = "gpio0", "gpio1", "gpio_mux"; interrupt-controller; #interrupt-cells = <0x2>; ranges; diff --git a/dts/src/arm/pxa3xx.dtsi b/dts/src/arm/pxa3xx.dtsi index 9d6f3aaced..7a0cc4ea81 100644 --- a/dts/src/arm/pxa3xx.dtsi +++ b/dts/src/arm/pxa3xx.dtsi @@ -138,6 +138,7 @@ reg = <0x40e10000 0xffff>; #address-cells = <1>; #size-cells = <0>; + #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x7>; }; diff --git a/dts/src/arm/qcom-apq8060-dragonboard.dts b/dts/src/arm/qcom-apq8060-dragonboard.dts index 6c0038398e..4b8872cc8b 100644 --- a/dts/src/arm/qcom-apq8060-dragonboard.dts +++ b/dts/src/arm/qcom-apq8060-dragonboard.dts @@ -51,6 +51,29 @@ regulator-boot-on; }; + /* GPIO controlled ethernet power regulator */ + dragon_veth: xc622a331mrg { + compatible = "regulator-fixed"; + regulator-name = "XC6222A331MR-G"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vph>; + gpio = <&pm8058_gpio 40 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_veth_gpios>; + regulator-always-on; + }; + + /* VDDvario fixed regulator */ + dragon_vario: nds332p { + compatible = "regulator-fixed"; + regulator-name = "NDS332P"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&pm8058_s3>; + }; + /* This is a levelshifter for SDCC5 */ dragon_vio_txb: txb0104rgyr { compatible = "regulator-fixed"; @@ -167,6 +190,36 @@ bias-pull-up; }; }; + + dragon_ebi2_pins: ebi2 { + /* + * Pins used by EBI2 on the Dragonboard, actually only + * CS2 is used by a real peripheral. CS0 is just + * routed to a test point. + */ + mux0 { + pins = + /* "gpio39", CS1A_N this is not good to mux */ + "gpio40", /* CS2A_N */ + "gpio134"; /* CS0_N testpoint TP29 */ + function = "ebi2cs"; + }; + mux1 { + pins = + /* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */ + "gpio123", "gpio124", "gpio125", "gpio126", + "gpio127", "gpio128", "gpio129", "gpio130", + /* EBI2_DATA_15 downto EBI2_DATA_0 data bus */ + "gpio135", "gpio136", "gpio137", "gpio138", + "gpio139", "gpio140", "gpio141", "gpio142", + "gpio143", "gpio144", "gpio145", "gpio146", + "gpio147", "gpio148", "gpio149", "gpio150", + "gpio151", /* EBI2_OE_N */ + "gpio153", /* EBI2_ADV */ + "gpio157"; /* EBI2_WE_N */ + function = "ebi2"; + }; + }; }; qcom,ssbi@500000 { @@ -201,6 +254,15 @@ }; gpio@150 { + dragon_ethernet_gpios: ethernet-gpios { + pinconf { + pins = "gpio7"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; dragon_bmp085_gpios: bmp085-gpios { pinconf { pins = "gpio16"; @@ -238,6 +300,14 @@ power-source = <PM8058_GPIO_S3>; }; }; + dragon_veth_gpios: veth-gpios { + pinconf { + pins = "gpio40"; + function = "normal"; + bias-disable; + drive-push-pull; + }; + }; }; led@48 { @@ -322,6 +392,55 @@ }; }; + external-bus@1a100000 { + /* The EBI2 will instantiate first, then populate its children */ + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_ebi2_pins>; + + /* + * An on-board SMSC LAN9221 chip for "debug ethernet", + * which is actually just an ordinary ethernet on the + * EBI2. This has a 25MHz chrystal next to it, so no + * clocking is needed. + */ + ethernet-ebi2@2,0 { + compatible = "smsc,lan9221", "smsc,lan9115"; + reg = <2 0x0 0x100>; + /* + * GPIO7 has interrupt 198 on the PM8058 + * The second interrupt is the PME interrupt + * for network wakeup, connected to the TLMM. + */ + interrupts-extended = <&pmicintc 198 IRQ_TYPE_EDGE_FALLING>, + <&tlmm 29 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; + vdd33a-supply = <&dragon_veth>; + vddvario-supply = <&dragon_vario>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_ethernet_gpios>; + phy-mode = "mii"; + reg-io-width = <2>; + smsc,force-external-phy; + /* IRQ on edge falling = active low */ + smsc,irq-active-low; + smsc,irq-push-pull; + + /* + * SLOW chipselect config + * Delay 9 cycles (140ns@64MHz) between SMSC + * LAN9221 Ethernet controller reads and writes + * on CS2. + */ + qcom,xmem-recovery-cycles = <0>; + qcom,xmem-write-hold-cycles = <3>; + qcom,xmem-write-delta-cycles = <31>; + qcom,xmem-read-delta-cycles = <28>; + qcom,xmem-write-wait-cycles = <9>; + qcom,xmem-read-wait-cycles = <9>; + }; + }; + rpm@104000 { /* * Set up of the PMIC RPM regulators for this board diff --git a/dts/src/arm/qcom-apq8064-asus-nexus7-flo.dts b/dts/src/arm/qcom-apq8064-asus-nexus7-flo.dts index b72e095064..e39440a867 100644 --- a/dts/src/arm/qcom-apq8064-asus-nexus7-flo.dts +++ b/dts/src/arm/qcom-apq8064-asus-nexus7-flo.dts @@ -15,6 +15,20 @@ stdout-path = "serial0:115200n8"; }; + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ramoops@88d00000{ + compatible = "ramoops"; + reg = <0x88d00000 0x100000>; + record-size = <0x00020000>; + console-size = <0x00020000>; + ftrace-size = <0x00020000>; + }; + }; + ext_3p3v: regulator-fixed@1 { compatible = "regulator-fixed"; regulator-min-microvolt = <3300000>; @@ -99,6 +113,7 @@ l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; + regulator-always-on; }; /* msm_otg-HSUSB_3p3 */ @@ -133,13 +148,14 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; bias-pull-down; + regulator-always-on; }; /* pwm_power for backlight */ l17 { regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3600000>; - bias-pull-down; + regulator-max-microvolt = <3000000>; + regulator-always-on; }; /* camera, qdsp6 */ @@ -184,6 +200,63 @@ }; }; + mdp@5100000 { + status = "okay"; + ports { + port@1 { + mdp_dsi1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + }; + + dsi0: mdss_dsi@4700000 { + status = "okay"; + vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/ + vdd-supply = <&pm8921_l8>; + vddio-supply = <&pm8921_lvs7>; + avdd-supply = <&pm8921_l11>; + vcss-supply = <&ext_3p3v>; + + panel@0 { + reg = <0>; + compatible = "jdi,lt070me05000"; + + vddp-supply = <&pm8921_l17>; + iovcc-supply = <&pm8921_lvs7>; + + enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; + dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + ports { + port@0 { + dsi0_in: endpoint { + remote-endpoint = <&mdp_dsi1_out>; + }; + }; + + port@1 { + dsi0_out: endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; + }; + + dsi-phy@4700200 { + status = "okay"; + vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/ + }; + gsbi@16200000 { status = "okay"; qcom,mode = <GSBI_PROT_I2C>; diff --git a/dts/src/arm/qcom-apq8064-ifc6410.dts b/dts/src/arm/qcom-apq8064-ifc6410.dts index 2eeb0904ea..3d37cab3b9 100644 --- a/dts/src/arm/qcom-apq8064-ifc6410.dts +++ b/dts/src/arm/qcom-apq8064-ifc6410.dts @@ -43,6 +43,17 @@ }; }; + hdmi-out { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + }; + soc { pinctrl@800000 { card_detect: card_detect { @@ -64,6 +75,25 @@ bias-disable; }; }; + + hdmi_pinctrl: hdmi-pinctrl { + mux { + pins = "gpio70", "gpio71", "gpio72"; + function = "hdmi"; + }; + + pinconf_ddc { + pins = "gpio70", "gpio71"; + bias-pull-up; + drive-strength = <2>; + }; + + pinconf_hpd { + pins = "gpio72"; + bias-pull-down; + drive-strength = <16>; + }; + }; }; rpm@108000 { @@ -329,5 +359,49 @@ mmc-pwrseq = <&sdcc4_pwrseq>; }; }; + + hdmi-tx@4a00000 { + status = "okay"; + + core-vdda-supply = <&pm8921_hdmi_switch>; + hdmi-mux-supply = <&ext_3p3v>; + + hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pinctrl>; + + ports { + port@0 { + endpoint { + remote-endpoint = <&mdp_dtv_out>; + }; + }; + + port@1 { + endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; + + hdmi-phy@4a00400 { + status = "okay"; + + core-vdda-supply = <&pm8921_hdmi_switch>; + }; + + mdp@5100000 { + status = "okay"; + + ports { + port@3 { + endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; }; }; diff --git a/dts/src/arm/qcom-apq8064.dtsi b/dts/src/arm/qcom-apq8064.dtsi index 1dbe697b2e..268bd470c8 100644 --- a/dts/src/arm/qcom-apq8064.dtsi +++ b/dts/src/arm/qcom-apq8064.dtsi @@ -1060,6 +1060,231 @@ reg = <0x1a400000 0x100>; }; + gpu: adreno-3xx@4300000 { + compatible = "qcom,adreno-3xx"; + reg = <0x04300000 0x20000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = <GIC_SPI 80 0>; + interrupt-names = "kgsl_3d0_irq"; + clock-names = + "core_clk", + "iface_clk", + "mem_clk", + "mem_iface_clk"; + clocks = + <&mmcc GFX3D_CLK>, + <&mmcc GFX3D_AHB_CLK>, + <&mmcc GFX3D_AXI_CLK>, + <&mmcc MMSS_IMEM_AHB_CLK>; + qcom,chipid = <0x03020002>; + + iommus = <&gfx3d 0 + &gfx3d 1 + &gfx3d 2 + &gfx3d 3 + &gfx3d 4 + &gfx3d 5 + &gfx3d 6 + &gfx3d 7 + &gfx3d 8 + &gfx3d 9 + &gfx3d 10 + &gfx3d 11 + &gfx3d 12 + &gfx3d 13 + &gfx3d 14 + &gfx3d 15 + &gfx3d 16 + &gfx3d 17 + &gfx3d 18 + &gfx3d 19 + &gfx3d 20 + &gfx3d 21 + &gfx3d 22 + &gfx3d 23 + &gfx3d 24 + &gfx3d 25 + &gfx3d 26 + &gfx3d 27 + &gfx3d 28 + &gfx3d 29 + &gfx3d 30 + &gfx3d 31 + &gfx3d1 0 + &gfx3d1 1 + &gfx3d1 2 + &gfx3d1 3 + &gfx3d1 4 + &gfx3d1 5 + &gfx3d1 6 + &gfx3d1 7 + &gfx3d1 8 + &gfx3d1 9 + &gfx3d1 10 + &gfx3d1 11 + &gfx3d1 12 + &gfx3d1 13 + &gfx3d1 14 + &gfx3d1 15 + &gfx3d1 16 + &gfx3d1 17 + &gfx3d1 18 + &gfx3d1 19 + &gfx3d1 20 + &gfx3d1 21 + &gfx3d1 22 + &gfx3d1 23 + &gfx3d1 24 + &gfx3d1 25 + &gfx3d1 26 + &gfx3d1 27 + &gfx3d1 28 + &gfx3d1 29 + &gfx3d1 30 + &gfx3d1 31>; + + qcom,gpu-pwrlevels { + compatible = "qcom,gpu-pwrlevels"; + qcom,gpu-pwrlevel@0 { + qcom,gpu-freq = <450000000>; + }; + qcom,gpu-pwrlevel@1 { + qcom,gpu-freq = <27000000>; + }; + }; + }; + + mmss_sfpb: syscon@5700000 { + compatible = "syscon"; + reg = <0x5700000 0x70>; + }; + + dsi0: mdss_dsi@4700000 { + compatible = "qcom,mdss-dsi-ctrl"; + label = "MDSS DSI CTRL->0"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 82 0>; + reg = <0x04700000 0x200>; + reg-names = "dsi_ctrl"; + + clocks = <&mmcc DSI_M_AHB_CLK>, + <&mmcc DSI_S_AHB_CLK>, + <&mmcc AMP_AHB_CLK>, + <&mmcc DSI_CLK>, + <&mmcc DSI1_BYTE_CLK>, + <&mmcc DSI_PIXEL_CLK>, + <&mmcc DSI1_ESC_CLK>; + clock-names = "iface_clk", "bus_clk", "core_mmss_clk", + "src_clk", "byte_clk", "pixel_clk", + "core_clk"; + + assigned-clocks = <&mmcc DSI1_BYTE_SRC>, + <&mmcc DSI1_ESC_SRC>, + <&mmcc DSI_SRC>, + <&mmcc DSI_PIXEL_SRC>; + assigned-clock-parents = <&dsi0_phy 0>, + <&dsi0_phy 0>, + <&dsi0_phy 1>, + <&dsi0_phy 1>; + syscon-sfpb = <&mmss_sfpb>; + phys = <&dsi0_phy>; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + + dsi0_phy: dsi-phy@4700200 { + compatible = "qcom,dsi-phy-28nm-8960"; + #clock-cells = <1>; + + reg = <0x04700200 0x100>, + <0x04700300 0x200>, + <0x04700500 0x5c>; + reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator"; + clock-names = "iface_clk"; + clocks = <&mmcc DSI_M_AHB_CLK>; + }; + + + mdp_port0: iommu@7500000 { + compatible = "qcom,apq8064-iommu"; + #iommu-cells = <1>; + clock-names = + "smmu_pclk", + "iommu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc MDP_AXI_CLK>; + reg = <0x07500000 0x100000>; + interrupts = + <GIC_SPI 63 0>, + <GIC_SPI 64 0>; + qcom,ncb = <2>; + }; + + mdp_port1: iommu@7600000 { + compatible = "qcom,apq8064-iommu"; + #iommu-cells = <1>; + clock-names = + "smmu_pclk", + "iommu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc MDP_AXI_CLK>; + reg = <0x07600000 0x100000>; + interrupts = + <GIC_SPI 61 0>, + <GIC_SPI 62 0>; + qcom,ncb = <2>; + }; + + gfx3d: iommu@7c00000 { + compatible = "qcom,apq8064-iommu"; + #iommu-cells = <1>; + clock-names = + "smmu_pclk", + "iommu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc GFX3D_AXI_CLK>; + reg = <0x07c00000 0x100000>; + interrupts = + <GIC_SPI 69 0>, + <GIC_SPI 70 0>; + qcom,ncb = <3>; + }; + + gfx3d1: iommu@7d00000 { + compatible = "qcom,apq8064-iommu"; + #iommu-cells = <1>; + clock-names = + "smmu_pclk", + "iommu_clk"; + clocks = + <&mmcc SMMU_AHB_CLK>, + <&mmcc GFX3D_AXI_CLK>; + reg = <0x07d00000 0x100000>; + interrupts = + <GIC_SPI 210 0>, + <GIC_SPI 211 0>; + qcom,ncb = <3>; + }; + pcie: pci@1b500000 { compatible = "qcom,pcie-apq8064", "snps,dw-pcie"; reg = <0x1b500000 0x1000 @@ -1095,6 +1320,102 @@ reset-names = "axi", "ahb", "por", "pci", "phy"; status = "disabled"; }; + + hdmi: hdmi-tx@4a00000 { + compatible = "qcom,hdmi-tx-8960"; + reg = <0x04a00000 0x2f0>; + reg-names = "core_physical"; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mmcc HDMI_APP_CLK>, + <&mmcc HDMI_M_AHB_CLK>, + <&mmcc HDMI_S_AHB_CLK>; + clock-names = "core_clk", + "master_iface_clk", + "slave_iface_clk"; + + phys = <&hdmi_phy>; + phy-names = "hdmi-phy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + hdmi_in: endpoint { + }; + }; + + port@1 { + reg = <1>; + hdmi_out: endpoint { + }; + }; + }; + }; + + hdmi_phy: hdmi-phy@4a00400 { + compatible = "qcom,hdmi-phy-8960"; + reg = <0x4a00400 0x60>, + <0x4a00500 0x100>; + reg-names = "hdmi_phy", + "hdmi_pll"; + + clocks = <&mmcc HDMI_S_AHB_CLK>; + clock-names = "slave_iface_clk"; + }; + + mdp: mdp@5100000 { + compatible = "qcom,mdp4"; + reg = <0x05100000 0xf0000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mmcc MDP_CLK>, + <&mmcc MDP_AHB_CLK>, + <&mmcc MDP_AXI_CLK>, + <&mmcc MDP_LUT_CLK>, + <&mmcc HDMI_TV_CLK>, + <&mmcc MDP_TV_CLK>; + clock-names = "core_clk", + "iface_clk", + "bus_clk", + "lut_clk", + "hdmi_clk", + "tv_clk"; + + iommus = <&mdp_port0 0 + &mdp_port0 2 + &mdp_port1 0 + &mdp_port1 2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp_lvds_out: endpoint { + }; + }; + + port@1 { + reg = <1>; + mdp_dsi1_out: endpoint { + }; + }; + + port@2 { + reg = <2>; + mdp_dsi2_out: endpoint { + }; + }; + + port@3 { + reg = <3>; + mdp_dtv_out: endpoint { + }; + }; + }; + }; }; }; #include "qcom-apq8064-pins.dtsi" diff --git a/dts/src/arm/qcom-apq8084.dtsi b/dts/src/arm/qcom-apq8084.dtsi index 39eb7a4ed1..80d4886710 100644 --- a/dts/src/arm/qcom-apq8084.dtsi +++ b/dts/src/arm/qcom-apq8084.dtsi @@ -182,13 +182,13 @@ }; clocks { - xo_board { + xo_board: xo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; }; - sleep_clk { + sleep_clk: sleep_clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; @@ -416,8 +416,10 @@ reg-names = "hc_mem", "core_mem"; interrupts = <0 123 0>, <0 138 0>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; - clock-names = "core", "iface"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; status = "disabled"; }; @@ -427,8 +429,10 @@ reg-names = "hc_mem", "core_mem"; interrupts = <0 125 0>, <0 221 0>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; - clock-names = "core", "iface"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; status = "disabled"; }; diff --git a/dts/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts b/dts/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts new file mode 100644 index 0000000000..26160c3248 --- /dev/null +++ b/dts/src/arm/qcom-mdm9615-wp8548-mangoh-green.dts @@ -0,0 +1,281 @@ +/* + * Device Tree Source for mangOH Green Board with WP8548 Module + * + * Copyright (C) 2016 BayLibre, SAS. + * Author : Neil Armstrong <narmstrong@baylibre.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/input/input.h> + +#include "qcom-mdm9615-wp8548.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "MangOH Green with WP8548 Module"; + compatible = "swir,mangoh-green-wp8548", "swir,wp8548", "qcom,mdm9615"; + + aliases { + spi0 = &gsbi3_spi; + serial0 = &gsbi4_serial; + serial1 = &gsbi5_serial; + i2c0 = &gsbi5_i2c; + mmc0 = &sdcc1; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; +}; + +&msmgpio { + /* MangOH GPIO Mapping : + * - 2 : GPIOEXP_INT2 + * - 7 : IOT1_GPIO2 + * - 8 : IOT0_GPIO4 + * - 13: IOT0_GPIO3 + * - 21: IOT1_GPIO4 + * - 22: IOT2_GPIO1 + * - 23: IOT2_GPIO2 + * - 24: IOT2_GPIO3 + * - 25: IOT1_GPIO1 + * - 32: IOT1_GPIO3 + * - 33: IOT0_GPIO2 + * - 42: IOT0_GPIO1 and SD Card Detect + */ + + gpioext1_pins: gpioext1_pins { + pins { + pins = "gpio2"; + function = "gpio"; + input-enable; + bias-disable; + }; + }; + + sdc_cd_pins: sdc_cd_pins { + pins { + pins = "gpio42"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; +}; + +&gsbi3_spi { + spi@0 { + compatible = "swir,mangoh-iotport-spi", "spidev"; + spi-max-frequency = <24000000>; + reg = <0>; + }; +}; + +&gsbi5_i2c { + mux@71 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x71>; + + i2c_iot0: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + }; + + i2c_iot1: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + + i2c_iot2: i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + usbhub: hub@8 { + compatible = "smsc,usb3503a"; + reg = <0x8>; + connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>; + intn-gpios = <&gpioext2 0 GPIO_ACTIVE_LOW>; + initial-mode = <1>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + gpioext0: gpio@3e { + /* GPIO Expander 0 Mapping : + * - 0: ARDUINO_RESET_Level shift + * - 1: BattChrgr_PG_N + * - 2: BattGauge_GPIO + * - 3: LED_ON (out active high) + * - 4: ATmega_reset_GPIO + * - 5: X + * - 6: PCM_ANALOG_SELECT (out active high) + * - 7: X + * - 8: Board_rev_res1 (in) + * - 9: Board_rev_res2 (in) + * - 10: UART_EXP1_ENn (out active low / pull-down) + * - 11: UART_EXP1_IN (out pull-down) + * - 12: UART_EXP2_IN (out pull-down) + * - 13: SDIO_SEL (out pull-down) + * - 14: SPI_EXP1_ENn (out active low / pull-down) + * - 15: SPI_EXP1_IN (out pull-down) + */ + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1509q"; + reg = <0x3e>; + interrupt-parent = <&gpioext1>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + probe-reset; + + gpio-controller; + interrupt-controller; + }; + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + gpioext1: gpio@3f { + /* GPIO Expander 1 Mapping : + * - 0: GPIOEXP_INT1 + * - 1: Battery detect + * - 2: GPIO_SCF3_RESET + * - 3: LED_CARD_DETECT_IOT0 (in) + * - 4: LED_CARD_DETECT_IOT1 (in) + * - 5: LED_CARD_DETECT_IOT2 (in) + * - 6: UIM2_PWM_SELECT + * - 7: UIM2_M2_S_SELECT + * - 8: TP900 + * - 9: SENSOR_INT1 (in) + * - 10: SENSOR_INT2 (in) + * - 11: CARD_DETECT_IOT0 (in pull-up) + * - 12: CARD_DETECT_IOT2 (in pull-up) + * - 13: CARD_DETECT_IOT1 (in pull-up) + * - 14: GPIOEXP_INT3 (in active low / pull-up) + * - 15: BattChrgr_INT_N + */ + pinctrl-0 = <&gpioext1_pins>; + pinctrl-names = "default"; + + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1509q"; + reg = <0x3f>; + interrupt-parent = <&msmgpio>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + probe-reset; + + gpio-controller; + interrupt-controller; + }; + }; + + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + gpioext2: gpio@70 { + /* GPIO Expander 2 Mapping : + * - 0: USB_HUB_INTn + * - 1: HUB_CONNECT + * - 2: GPIO_IOT2_RESET (out active low / pull-up) + * - 3: GPIO_IOT1_RESET (out active low / pull-up) + * - 4: GPIO_IOT0_RESET (out active low / pull-up) + * - 5: TP901 + * - 6: TP902 + * - 7: TP903 + * - 8: UART_EXP2_ENn (out active low / pull-down) + * - 9: PCM_EXP1_ENn (out active low) + * - 10: PCM_EXP1_SEL (out) + * - 11: ARD_FTDI + * - 12: TP904 + * - 13: TP905 + * - 14: TP906 + * - 15: RS232_Enable (out active high / pull-up) + */ + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "semtech,sx1509q"; + reg = <0x70>; + interrupt-parent = <&gpioext1>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + + probe-reset; + + gpio-controller; + interrupt-controller; + }; + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + }; +}; + +&sdcc1 { + pinctrl-0 = <&sdc_cd_pins>; + pinctrl-names = "default"; + disable-wp; + cd-gpios = <&msmgpio 42 GPIO_ACTIVE_LOW>; /* Active low CD */ +}; diff --git a/dts/src/arm/qcom-mdm9615-wp8548.dtsi b/dts/src/arm/qcom-mdm9615-wp8548.dtsi new file mode 100644 index 0000000000..7869898e39 --- /dev/null +++ b/dts/src/arm/qcom-mdm9615-wp8548.dtsi @@ -0,0 +1,170 @@ +/* + * Device Tree Source for Sierra Wireless WP8548 Module + * + * Copyright (C) 2016 BayLibre, SAS. + * Author : Neil Armstrong <narmstrong@baylibre.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "qcom-mdm9615.dtsi" + +/ { + model = "Sierra Wireless WP8548 Module"; + compatible = "swir,wp8548", "qcom,mdm9615"; + + memory { + reg = <0x48000000 0x7F00000>; + }; +}; + +&msmgpio { + pinctrl-0 = <&reset_out_pins>; + pinctrl-names = "default"; + + gsbi3_pins: gsbi3_pins { + mux { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gsbi3"; + drive-strength = <8>; + bias-disable; + }; + }; + + gsbi4_pins: gsbi4_pins { + mux { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gsbi4"; + drive-strength = <8>; + bias-disable; + }; + }; + + gsbi5_i2c_pins: gsbi5_i2c_pins { + pin16 { + pins = "gpio16"; + function = "gsbi5_i2c"; + drive-strength = <8>; + bias-disable; + }; + + pin17 { + pins = "gpio17"; + function = "gsbi5_i2c"; + drive-strength = <2>; + bias-disable; + }; + }; + + gsbi5_uart_pins: gsbi5_uart_pins { + mux { + pins = "gpio18", "gpio19"; + function = "gsbi5_uart"; + drive-strength = <8>; + bias-disable; + }; + }; + + reset_out_pins: reset_out_pins { + pins { + pins = "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + output-high; + }; + }; +}; + +&pmicgpio { + usb_vbus_5v_pins: usb_vbus_5v_pins { + pins = "gpio4"; + function = "normal"; + output-high; + bias-disable; + qcom,drive-strength = <1>; + power-source = <2>; + }; +}; + +&gsbi3 { + status = "ok"; + qcom,mode = <GSBI_PROT_SPI>; +}; + +&gsbi3_spi { + status = "ok"; + pinctrl-0 = <&gsbi3_pins>; + pinctrl-names = "default"; + assigned-clocks = <&gcc GSBI3_QUP_CLK>; + assigned-clock-rates = <24000000>; +}; + +&gsbi4 { + status = "ok"; + qcom,mode = <GSBI_PROT_UART_W_FC>; +}; + +&gsbi4_serial { + status = "ok"; + pinctrl-0 = <&gsbi4_pins>; + pinctrl-names = "default"; +}; + +&gsbi5 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; +}; + +&gsbi5_i2c { + status = "ok"; + clock-frequency = <200000>; + pinctrl-0 = <&gsbi5_i2c_pins>; + pinctrl-names = "default"; +}; + +&gsbi5_serial { + status = "ok"; + pinctrl-0 = <&gsbi5_uart_pins>; + pinctrl-names = "default"; +}; + +&sdcc1 { + status = "ok"; +}; diff --git a/dts/src/arm/qcom-mdm9615.dtsi b/dts/src/arm/qcom-mdm9615.dtsi new file mode 100644 index 0000000000..5ae4ec59e6 --- /dev/null +++ b/dts/src/arm/qcom-mdm9615.dtsi @@ -0,0 +1,557 @@ +/* + * Device Tree Source for Qualcomm MDM9615 SoC + * + * Copyright (C) 2016 BayLibre, SAS. + * Author : Neil Armstrong <narmstrong@baylibre.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +/include/ "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-mdm9615.h> +#include <dt-bindings/reset/qcom,gcc-mdm9615.h> +#include <dt-bindings/mfd/qcom-rpm.h> +#include <dt-bindings/soc/qcom,gsbi.h> + +/ { + model = "Qualcomm MDM9615"; + compatible = "qcom,mdm9615"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a5"; + device_type = "cpu"; + next-level-cache = <&L2>; + }; + }; + + cpu-pmu { + compatible = "arm,cortex-a5-pmu"; + interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + clocks { + cxo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + }; + + regulators { + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + L2: l2-cache@2040000 { + compatible = "arm,pl310-cache"; + reg = <0x02040000 0x1000>; + arm,data-latency = <2 2 0>; + cache-unified; + cache-level = <2>; + }; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x02000000 0x1000>, + <0x02002000 0x1000>; + }; + + timer@200a000 { + compatible = "qcom,kpss-timer", "qcom,msm-timer"; + interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>; + reg = <0x0200a000 0x100>; + clock-frequency = <27000000>, + <32768>; + cpu-offset = <0x80000>; + }; + + msmgpio: pinctrl@800000 { + compatible = "qcom,mdm9615-pinctrl"; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x800000 0x4000>; + }; + + gcc: clock-controller@900000 { + compatible = "qcom,gcc-mdm9615"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x900000 0x4000>; + }; + + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-mdm9615"; + reg = <0x28000000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + l2cc: clock-controller@2011000 { + compatible = "syscon"; + reg = <0x02011000 0x1000>; + }; + + rng@1a500000 { + compatible = "qcom,prng"; + reg = <0x1a500000 0x200>; + clocks = <&gcc PRNG_CLK>; + clock-names = "core"; + assigned-clocks = <&gcc PRNG_CLK>; + assigned-clock-rates = <32000000>; + }; + + gsbi2: gsbi@16100000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <2>; + reg = <0x16100000 0x100>; + clocks = <&gcc GSBI2_H_CLK>; + clock-names = "iface"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi2_i2c: i2c@16180000 { + compatible = "qcom,i2c-qup-v1.1.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x16180000 0x1000>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + gsbi3: gsbi@16200000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <3>; + reg = <0x16200000 0x100>; + clocks = <&gcc GSBI3_H_CLK>; + clock-names = "iface"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gsbi3_spi: spi@16280000 { + compatible = "qcom,spi-qup-v1.1.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x16280000 0x1000>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + spi-max-frequency = <24000000>; + + clocks = <&gcc GSBI3_QUP_CLK>, <&gcc GSBI3_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + gsbi4: gsbi@16300000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <4>; + reg = <0x16300000 0x100>; + clocks = <&gcc GSBI4_H_CLK>; + clock-names = "iface"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi4_serial: serial@16340000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16340000 0x1000>, + <0x16300000 0x1000>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + gsbi5: gsbi@16400000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <5>; + reg = <0x16400000 0x100>; + clocks = <&gcc GSBI5_H_CLK>; + clock-names = "iface"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + syscon-tcsr = <&tcsr>; + + gsbi5_i2c: i2c@16480000 { + compatible = "qcom,i2c-qup-v1.1.1"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x16480000 0x1000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + + /* QUP clock is not initialized, set rate */ + assigned-clocks = <&gcc GSBI5_QUP_CLK>; + assigned-clock-rates = <24000000>; + + clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + gsbi5_serial: serial@16440000 { + compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + }; + + qcom,ssbi@500000 { + compatible = "qcom,ssbi"; + reg = <0x500000 0x1000>; + qcom,controller-type = "pmic-arbiter"; + + pmicintc: pmic@0 { + compatible = "qcom,pm8018", "qcom,pm8921"; + interrupts = <GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pwrkey@1c { + compatible = "qcom,pm8018-pwrkey", "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pmicintc>; + interrupts = <50 IRQ_TYPE_EDGE_RISING>, + <51 IRQ_TYPE_EDGE_RISING>; + debounce = <15625>; + pull-up; + }; + + pmicmpp: mpp@50 { + compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp"; + interrupt-parent = <&pmicintc>; + interrupts = <24 IRQ_TYPE_NONE>, + <25 IRQ_TYPE_NONE>, + <26 IRQ_TYPE_NONE>, + <27 IRQ_TYPE_NONE>, + <28 IRQ_TYPE_NONE>, + <29 IRQ_TYPE_NONE>; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc@11d { + compatible = "qcom,pm8018-rtc", "qcom,pm8921-rtc"; + interrupt-parent = <&pmicintc>; + interrupts = <39 IRQ_TYPE_EDGE_RISING>; + reg = <0x11d>; + allow-set-time; + }; + + pmicgpio: gpio@150 { + compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; + interrupt-parent = <&pmicintc>; + interrupts = <24 IRQ_TYPE_NONE>, + <25 IRQ_TYPE_NONE>, + <26 IRQ_TYPE_NONE>, + <27 IRQ_TYPE_NONE>, + <28 IRQ_TYPE_NONE>, + <29 IRQ_TYPE_NONE>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; + + sdcc1bam: dma@12182000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x12182000 0x8000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC1_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + sdcc2bam: dma@12142000{ + compatible = "qcom,bam-v1.3.0"; + reg = <0x12142000 0x8000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc SDC2_H_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + sdcc1: sdcc@12180000 { + status = "disabled"; + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + reg = <0x12180000 0x2000>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <8>; + max-frequency = <48000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; + dma-names = "tx", "rx"; + assigned-clocks = <&gcc SDC1_CLK>; + assigned-clock-rates = <400000>; + }; + + sdcc2: sdcc@12140000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12140000 0x2000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC2_CLK>, <&gcc SDC2_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; + no-1-8-v; + vmmc-supply = <&vsdcc_fixed>; + dmas = <&sdcc2bam 2>, <&sdcc2bam 1>; + dma-names = "tx", "rx"; + assigned-clocks = <&gcc SDC2_CLK>; + assigned-clock-rates = <400000>; + }; + }; + + tcsr: syscon@1a400000 { + compatible = "qcom,tcsr-mdm9615", "syscon"; + reg = <0x1a400000 0x100>; + }; + + rpm: rpm@108000 { + compatible = "qcom,rpm-mdm9615"; + reg = <0x108000 0x1000>; + + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ack", "err", "wakeup"; + + regulators { + compatible = "qcom,rpm-pm8018-regulators"; + + vin_lvs1-supply = <&pm8018_s3>; + + vdd_l7-supply = <&pm8018_s4>; + vdd_l8-supply = <&pm8018_s3>; + vdd_l9_l10_l11_l12-supply = <&pm8018_s5>; + + /* Buck SMPS */ + pm8018_s1: s1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s2: s2 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s3: s3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s4: s4 { + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2200000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8018_s5: s5 { + regulator-always-on; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* PMOS LDO */ + pm8018_l2: l2 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8018_l3: l3 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8018_l4: l4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8018_l5: l5 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8018_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8018_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8018_l8: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8018_l9: l9 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + pm8018_l10: l10 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l11: l11 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l12: l12 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8018_l13: l13 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8018_l14: l14 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + pm8018_lvs1: lvs1 { + bias-pull-down; + }; + }; + }; + }; +}; diff --git a/dts/src/arm/qcom-msm8660.dtsi b/dts/src/arm/qcom-msm8660.dtsi index 8c65e0d825..4d828f8107 100644 --- a/dts/src/arm/qcom-msm8660.dtsi +++ b/dts/src/arm/qcom-msm8660.dtsi @@ -141,6 +141,23 @@ }; }; + external-bus@1a100000 { + compatible = "qcom,msm8660-ebi2"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0x0 0x1a800000 0x00800000>, + <1 0x0 0x1b000000 0x00800000>, + <2 0x0 0x1b800000 0x00800000>, + <3 0x0 0x1d000000 0x08000000>, + <4 0x0 0x1c800000 0x00800000>, + <5 0x0 0x1c000000 0x00800000>; + reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>; + reg-names = "ebi2", "xmem"; + clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>; + clock-names = "ebi2x", "ebi2"; + status = "disabled"; + }; + qcom,ssbi@500000 { compatible = "qcom,ssbi"; reg = <0x500000 0x1000>; diff --git a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts index c0fb4a698c..382bcc3231 100644 --- a/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/dts/src/arm/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -224,6 +224,35 @@ status = "ok"; }; + pinctrl@fd510000 { + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + }; + + sdhci@f9824900 { + status = "ok"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + bus-width = <8>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; + }; + gpio-keys { compatible = "gpio-keys"; input-name = "gpio-keys"; diff --git a/dts/src/arm/qcom-msm8974.dtsi b/dts/src/arm/qcom-msm8974.dtsi index d2109475bd..49d579f288 100644 --- a/dts/src/arm/qcom-msm8974.dtsi +++ b/dts/src/arm/qcom-msm8974.dtsi @@ -220,13 +220,13 @@ }; clocks { - xo_board { + xo_board: xo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; }; - sleep_clk { + sleep_clk: sleep_clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; @@ -558,8 +558,10 @@ reg-names = "hc_mem", "core_mem"; interrupts = <0 123 0>, <0 138 0>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; - clock-names = "core", "iface"; + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; status = "disabled"; }; @@ -569,8 +571,10 @@ reg-names = "hc_mem", "core_mem"; interrupts = <0 125 0>, <0 221 0>; interrupt-names = "hc_irq", "pwr_irq"; - clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; - clock-names = "core", "iface"; + clocks = <&gcc GCC_SDCC2_APPS_CLK>, + <&gcc GCC_SDCC2_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; status = "disabled"; }; diff --git a/dts/src/arm/r7s72100-rskrza1.dts b/dts/src/arm/r7s72100-rskrza1.dts index e5dea5bb40..dd4418195c 100644 --- a/dts/src/arm/r7s72100-rskrza1.dts +++ b/dts/src/arm/r7s72100-rskrza1.dts @@ -56,6 +56,11 @@ }; }; +&sdhi1 { + bus-width = <4>; + status = "okay"; +}; + &scif2 { status = "okay"; }; diff --git a/dts/src/arm/r7s72100.dtsi b/dts/src/arm/r7s72100.dtsi index fb9ef9ca12..3dd427d68c 100644 --- a/dts/src/arm/r7s72100.dtsi +++ b/dts/src/arm/r7s72100.dtsi @@ -117,6 +117,15 @@ clock-output-names = "ether"; }; + mstp8_clks: mstp8_clks@fcfe0434 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0434 4>; + clocks = <&p1_clk>; + clock-indices = <R7S72100_CLK_MMCIF>; + clock-output-names = "mmcif"; + }; + mstp9_clks: mstp9_clks@fcfe0438 { #clock-cells = <1>; compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -140,6 +149,14 @@ >; clock-output-names = "spi0", "spi1", "spi2", "spi3", "spi4"; }; + mstp12_clks: mstp12_clks@fcfe0444 { + #clock-cells = <1>; + compatible = "renesas,r7s72100-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0xfcfe0444 4>; + clocks = <&p1_clk>, <&p1_clk>; + clock-indices = <R7S72100_CLK_SDHI1 R7S72100_CLK_SDHI0>; + clock-output-names = "sdhi1", "sdhi0"; + }; }; cpus { @@ -441,4 +458,42 @@ #size-cells = <0>; status = "disabled"; }; + + mmcif: mmc@e804c800 { + compatible = "renesas,mmcif-r7s72100", "renesas,sh-mmcif"; + reg = <0xe804c800 0x80>; + interrupts = <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R7S72100_CLK_MMCIF>; + reg-io-width = <4>; + bus-width = <8>; + status = "disabled"; + }; + + sdhi0: sd@e804e000 { + compatible = "renesas,sdhi-r7s72100"; + reg = <0xe804e000 0x100>; + interrupts = <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mstp12_clks R7S72100_CLK_SDHI0>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi1: sd@e804e800 { + compatible = "renesas,sdhi-r7s72100"; + reg = <0xe804e800 0x100>; + interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&mstp12_clks R7S72100_CLK_SDHI1>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; }; diff --git a/dts/src/arm/r8a73a4.dtsi b/dts/src/arm/r8a73a4.dtsi index ca8672778f..53183ffe04 100644 --- a/dts/src/arm/r8a73a4.dtsi +++ b/dts/src/arm/r8a73a4.dtsi @@ -751,6 +751,11 @@ }; }; + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,sysc-r8a73a4", "renesas,sysc-rmobile"; reg = <0 0xe6180000 0 0x8000>, <0 0xe6188000 0 0x8000>; diff --git a/dts/src/arm/r8a7740.dtsi b/dts/src/arm/r8a7740.dtsi index 159e04eb1b..34159a8349 100644 --- a/dts/src/arm/r8a7740.dtsi +++ b/dts/src/arm/r8a7740.dtsi @@ -8,8 +8,6 @@ * kind, whether express or implied. */ -/include/ "skeleton.dtsi" - #include <dt-bindings/clock/r8a7740-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -17,6 +15,8 @@ / { compatible = "renesas,r8a7740"; interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; diff --git a/dts/src/arm/r8a7743-sk-rzg1m.dts b/dts/src/arm/r8a7743-sk-rzg1m.dts new file mode 100644 index 0000000000..3a22538208 --- /dev/null +++ b/dts/src/arm/r8a7743-sk-rzg1m.dts @@ -0,0 +1,57 @@ +/* + * Device Tree Source for the SK-RZG1M board + * + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7743.dtsi" + +/ { + model = "SK-RZG1M"; + compatible = "renesas,sk-rzg1m", "renesas,r8a7743"; + + aliases { + serial0 = &scif0; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + memory@200000000 { + device_type = "memory"; + reg = <2 0x00000000 0 0x40000000>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&scif0 { + status = "okay"; +}; + +ðer { + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; diff --git a/dts/src/arm/r8a7743.dtsi b/dts/src/arm/r8a7743.dtsi new file mode 100644 index 0000000000..216cb1f37f --- /dev/null +++ b/dts/src/arm/r8a7743.dtsi @@ -0,0 +1,476 @@ +/* + * Device Tree Source for the r8a7743 SoC + * + * Copyright (C) 2016 Cogent Embedded Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r8a7743-cpg-mssr.h> +#include <dt-bindings/power/r8a7743-sysc.h> + +/ { + compatible = "renesas,r8a7743"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1500000000>; + clocks = <&cpg CPG_CORE R8A7743_CLK_Z>; + power-domains = <&sysc R8A7743_PD_CA15_CPU0>; + next-level-cache = <&L2_CA15>; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + reg = <0>; + cache-unified; + cache-level = <2>; + power-domains = <&sysc R8A7743_PD_CA15_SCU>; + }; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + irqc: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7743", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7743-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7743-sysc"; + reg = <0 0xe6180000 0 0x200>; + #power-domain-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7743-rst"; + reg = <0 0xe6160000 0 0x100>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7743", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7743", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>; + clock-names = "fck"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c60000 0 0x40>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>; + clock-names = "fck"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c70000 0 0x40>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1106>; + clock-names = "fck"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa4: serial@e6c78000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c78000 0 0x40>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1107>; + clock-names = "fck"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa5: serial@e6c80000 { + compatible = "renesas,scifa-r8a7743", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c80000 0 0x40>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1108>; + clock-names = "fck"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7743", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c20000 0 0x100>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>; + clock-names = "fck"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7743", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c30000 0 0x100>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>; + clock-names = "fck"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7743", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6ce0000 0 0x100>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 216>; + clock-names = "fck"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 721>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 720>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif2: serial@e6e58000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e58000 0 0x40>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 719>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif3: serial@e6ea8000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ea8000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 718>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif4: serial@e6ee0000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee0000 0 0x40>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif5: serial@e6ee8000 { + compatible = "renesas,scif-r8a7743", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee8000 0 0x40>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7743", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 717>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7743", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif2: serial@e62d0000 { + compatible = "renesas,hscif-r8a7743", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62d0000 0 0x60>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 713>, + <&cpg CPG_CORE R8A7743_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + status = "disabled"; + }; + + ether: ethernet@ee700000 { + compatible = "renesas,ether-r8a7743"; + reg = <0 0xee700000 0 0x400>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; +}; diff --git a/dts/src/arm/r8a7745-sk-rzg1e.dts b/dts/src/arm/r8a7745-sk-rzg1e.dts new file mode 100644 index 0000000000..97840b3401 --- /dev/null +++ b/dts/src/arm/r8a7745-sk-rzg1e.dts @@ -0,0 +1,52 @@ +/* + * Device Tree Source for the SK-RZG1E board + * + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7745.dtsi" + +/ { + model = "SK-RZG1E"; + compatible = "renesas,sk-rzg1e", "renesas,r8a7745"; + + aliases { + serial0 = &scif2; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&scif2 { + status = "okay"; +}; + +ðer { + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; diff --git a/dts/src/arm/r8a7745.dtsi b/dts/src/arm/r8a7745.dtsi new file mode 100644 index 0000000000..0b2e2f3715 --- /dev/null +++ b/dts/src/arm/r8a7745.dtsi @@ -0,0 +1,476 @@ +/* + * Device Tree Source for the r8a7745 SoC + * + * Copyright (C) 2016 Cogent Embedded Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/r8a7745-cpg-mssr.h> +#include <dt-bindings/power/r8a7745-sysc.h> + +/ { + compatible = "renesas,r8a7745"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clock-frequency = <1000000000>; + clocks = <&cpg CPG_CORE R8A7745_CLK_Z2>; + power-domains = <&sysc R8A7745_PD_CA7_CPU0>; + next-level-cache = <&L2_CA7>; + }; + + L2_CA7: cache-controller@0 { + compatible = "cache"; + reg = <0>; + cache-unified; + cache-level = <2>; + power-domains = <&sysc R8A7745_PD_CA7_SCU>; + }; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + irqc: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7745", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 407>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + cpg: clock-controller@e6150000 { + compatible = "renesas,r8a7745-cpg-mssr"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>, <&usb_extal_clk>; + clock-names = "extal", "usb_extal"; + #clock-cells = <2>; + #power-domain-cells = <0>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7745-sysc"; + reg = <0 0xe6180000 0 0x200>; + #power-domain-cells = <1>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7745-rst"; + reg = <0 0xe6160000 0 0x100>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7745", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7745", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c40000 0 0x40>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>; + clock-names = "fck"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c50000 0 0x40>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>; + clock-names = "fck"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c60000 0 0x40>; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>; + clock-names = "fck"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c70000 0 0x40>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1106>; + clock-names = "fck"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa4: serial@e6c78000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c78000 0 0x40>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1107>; + clock-names = "fck"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifa5: serial@e6c80000 { + compatible = "renesas,scifa-r8a7745", + "renesas,rcar-gen2-scifa", "renesas,scifa"; + reg = <0 0xe6c80000 0 0x40>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 1108>; + clock-names = "fck"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb0: serial@e6c20000 { + compatible = "renesas,scifb-r8a7745", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c20000 0 0x100>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>; + clock-names = "fck"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb1: serial@e6c30000 { + compatible = "renesas,scifb-r8a7745", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6c30000 0 0x100>; + interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>; + clock-names = "fck"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scifb2: serial@e6ce0000 { + compatible = "renesas,scifb-r8a7745", + "renesas,rcar-gen2-scifb", "renesas,scifb"; + reg = <0 0xe6ce0000 0 0x100>; + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 216>; + clock-names = "fck"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 0x40>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 721>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 0x40>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 720>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif2: serial@e6e58000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e58000 0 0x40>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 719>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif3: serial@e6ea8000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ea8000 0 0x40>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 718>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif4: serial@e6ee0000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee0000 0 0x40>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 715>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif5: serial@e6ee8000 { + compatible = "renesas,scif-r8a7745", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ee8000 0 0x40>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 714>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7745", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 717>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7745", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 716>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif2: serial@e62d0000 { + compatible = "renesas,hscif-r8a7745", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62d0000 0 0x60>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 713>, + <&cpg CPG_CORE R8A7745_CLK_ZS>, <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + status = "disabled"; + }; + + ether: ethernet@ee700000 { + compatible = "renesas,ether-r8a7745"; + reg = <0 0xee700000 0 0x400>; + interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 813>; + power-domains = <&sysc R8A7745_PD_ALWAYS_ON>; + phy-mode = "rmii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + /* External USB clock - can be overridden by the board */ + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; +}; diff --git a/dts/src/arm/r8a7778.dtsi b/dts/src/arm/r8a7778.dtsi index e571d66ea0..d0db998eff 100644 --- a/dts/src/arm/r8a7778.dtsi +++ b/dts/src/arm/r8a7778.dtsi @@ -14,8 +14,6 @@ * kind, whether express or implied. */ -/include/ "skeleton.dtsi" - #include <dt-bindings/clock/r8a7778-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -23,6 +21,8 @@ / { compatible = "renesas,r8a7778"; interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; @@ -626,4 +626,9 @@ "sru-src6", "sru-src7", "sru-src8"; }; }; + + rst: reset-controller@ffcc0000 { + compatible = "renesas,r8a7778-reset-wdt"; + reg = <0xffcc0000 0x40>; + }; }; diff --git a/dts/src/arm/r8a7779-marzen.dts b/dts/src/arm/r8a7779-marzen.dts index 541678df90..676151b701 100644 --- a/dts/src/arm/r8a7779-marzen.dts +++ b/dts/src/arm/r8a7779-marzen.dts @@ -170,7 +170,7 @@ du_pins: du { du0 { - groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0"; + groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0", "du0_clk_in"; function = "du0"; }; du1 { diff --git a/dts/src/arm/r8a7779.dtsi b/dts/src/arm/r8a7779.dtsi index b9bbcce69d..55a7c1e37c 100644 --- a/dts/src/arm/r8a7779.dtsi +++ b/dts/src/arm/r8a7779.dtsi @@ -9,8 +9,6 @@ * kind, whether express or implied. */ -/include/ "skeleton.dtsi" - #include <dt-bindings/clock/r8a7779-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -19,6 +17,8 @@ / { compatible = "renesas,r8a7779"; interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; @@ -420,7 +420,7 @@ du: display@fff80000 { compatible = "renesas,du-r8a7779"; - reg = <0 0xfff80000 0 0x40000>; + reg = <0xfff80000 0x40000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp1_clks R8A7779_CLK_DU>; power-domains = <&sysc R8A7779_PD_ALWAYS_ON>; @@ -590,6 +590,16 @@ }; }; + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0xff000044 4>; + }; + + rst: reset-controller@ffcc0000 { + compatible = "renesas,r8a7779-reset-wdt"; + reg = <0xffcc0000 0x48>; + }; + sysc: system-controller@ffd85000 { compatible = "renesas,r8a7779-sysc"; reg = <0xffd85000 0x0200>; diff --git a/dts/src/arm/r8a7790-lager.dts b/dts/src/arm/r8a7790-lager.dts index 52b56fcadd..bd512c86e8 100644 --- a/dts/src/arm/r8a7790-lager.dts +++ b/dts/src/arm/r8a7790-lager.dts @@ -50,7 +50,9 @@ aliases { serial0 = &scif0; serial1 = &scifa1; - i2c8 = "i2cexio"; + i2c8 = &gpioi2c1; + i2c10 = &i2cexio0; + i2c11 = &i2cexio1; }; chosen { @@ -231,12 +233,23 @@ }; }; + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; + }; + }; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; port { - hdmi_con: endpoint { + hdmi_con_out: endpoint { remote-endpoint = <&adv7511_out>; }; }; @@ -254,6 +267,17 @@ clock-frequency = <148500000>; }; + gpioi2c1: i2c-8 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + status = "disabled"; + gpios = <&gpio1 17 GPIO_ACTIVE_HIGH /* sda */ + &gpio1 16 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,delay-us = <5>; + }; + /* * IIC0/I2C0 is routed to EXIO connector A, pins 114 (SCL) + 116 (SDA) only. * We use the I2C demuxer, so the desired IP core can be selected at runtime @@ -262,11 +286,26 @@ * bus with IIC3 on pins 110 (SCL) + 112 (SDA), select I2C0 at runtime, and * instantiate the slave device at runtime according to the documentation. * You can then communicate with the slave via IIC3. + * + * IIC0/I2C0 does not appear to support fallback to GPIO. */ - i2cexio: i2c-8 { + i2cexio0: i2c-10 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&iic0>, <&i2c0>; - i2c-bus-name = "i2c-exio"; + i2c-bus-name = "i2c-exio0"; + #address-cells = <1>; + #size-cells = <0>; + }; + + /* + * IIC1/I2C1 is routed to EXIO connector A, pins 78 (SCL) + 80 (SDA). + * This is similar to the arangement described for i2cexio0 (above) + * with a fallback to GPIO also provided. + */ + i2cexio1: i2c-11 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&iic1>, <&i2c1>, <&gpioi2c1>; + i2c-bus-name = "i2c-exio1"; #address-cells = <1>; #size-cells = <0>; }; @@ -392,6 +431,11 @@ function = "iic0"; }; + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + iic1_pins: iic1 { groups = "iic1"; function = "iic1"; @@ -427,6 +471,11 @@ function = "usb2"; }; + vin0_pins: vin0 { + groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; + function = "vin0"; + }; + vin1_pins: vin1 { groups = "vin1_data8", "vin1_clk"; function = "vin1"; @@ -559,6 +608,7 @@ vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; @@ -580,18 +630,22 @@ &i2c0 { pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "i2c-exio"; + pinctrl-names = "i2c-exio0"; }; &iic0 { pinctrl-0 = <&iic0_pins>; - pinctrl-names = "i2c-exio"; + pinctrl-names = "i2c-exio0"; +}; + +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "i2c-exio1"; }; &iic1 { - status = "okay"; pinctrl-0 = <&iic1_pins>; - pinctrl-names = "default"; + pinctrl-names = "i2c-exio1"; }; &iic2 { @@ -646,7 +700,34 @@ port@1 { reg = <1>; adv7511_out: endpoint { - remote-endpoint = <&hdmi_con>; + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + hdmi-in@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + adv7612_out: endpoint { + remote-endpoint = <&vin0ep2>; }; }; }; @@ -722,6 +803,25 @@ status = "okay"; }; +/* HDMI video input */ +&vin0 { + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + port { + vin0ep2: endpoint { + remote-endpoint = <&adv7612_out>; + bus-width = <24>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + data-active = <1>; + }; + }; +}; + /* composite video input */ &vin1 { pinctrl-0 = <&vin1_pins>; diff --git a/dts/src/arm/r8a7790.dtsi b/dts/src/arm/r8a7790.dtsi index 351fcc2f87..0c8900d4b8 100644 --- a/dts/src/arm/r8a7790.dtsi +++ b/dts/src/arm/r8a7790.dtsi @@ -711,7 +711,7 @@ scifb0: serial@e6c20000 { compatible = "renesas,scifb-r8a7790", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c20000 0 64>; + reg = <0 0xe6c20000 0 0x100>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>; clock-names = "fck"; @@ -725,7 +725,7 @@ scifb1: serial@e6c30000 { compatible = "renesas,scifb-r8a7790", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c30000 0 64>; + reg = <0 0xe6c30000 0 0x100>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>; clock-names = "fck"; @@ -739,7 +739,7 @@ scifb2: serial@e6ce0000 { compatible = "renesas,scifb-r8a7790", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6ce0000 0 64>; + reg = <0 0xe6ce0000 0 0x100>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>; clock-names = "fck"; @@ -1471,6 +1471,16 @@ }; }; + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7790-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7790-sysc"; reg = <0 0xe6180000 0 0x0200>; diff --git a/dts/src/arm/r8a7791-koelsch.dts b/dts/src/arm/r8a7791-koelsch.dts index f8a7d090fd..5405d337d7 100644 --- a/dts/src/arm/r8a7791-koelsch.dts +++ b/dts/src/arm/r8a7791-koelsch.dts @@ -50,6 +50,8 @@ aliases { serial0 = &scif0; serial1 = &scif1; + i2c9 = &gpioi2c1; + i2c12 = &i2cexio1; }; chosen { @@ -265,12 +267,23 @@ }; }; + hdmi-in { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&adv7612_in>; + }; + }; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; port { - hdmi_con: endpoint { + hdmi_con_out: endpoint { remote-endpoint = <&adv7511_out>; }; }; @@ -287,6 +300,29 @@ #clock-cells = <0>; clock-frequency = <148500000>; }; + + gpioi2c1: i2c-9 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + status = "disabled"; + gpios = <&gpio7 16 GPIO_ACTIVE_HIGH /* sda */ + &gpio7 15 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,delay-us = <5>; + }; + + /* + * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA). + * A fallback to GPIO is provided. + */ + i2cexio1: i2c-12 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&i2c1>, <&gpioi2c1>; + i2c-bus-name = "i2c-exio1"; + #address-cells = <1>; + #size-cells = <0>; + }; }; &du { @@ -322,6 +358,11 @@ pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; + i2c1_pins: i2c1 { + groups = "i2c1"; + function = "i2c1"; + }; + i2c2_pins: i2c2 { groups = "i2c2"; function = "i2c2"; @@ -360,16 +401,37 @@ sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; }; sdhi1_pins: sd1 { groups = "sdhi1_data4", "sdhi1_ctrl"; function = "sdhi1"; + power-source = <3300>; + }; + + sdhi1_pins_uhs: sd1_uhs { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <1800>; }; sdhi2_pins: sd2 { groups = "sdhi2_data4", "sdhi2_ctrl"; function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; }; qspi_pins: qspi { @@ -393,6 +455,11 @@ function = "usb1"; }; + vin0_pins: vin0 { + groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; + function = "vin0"; + }; + vin1_pins: vin1 { groups = "vin1_data8", "vin1_clk"; function = "vin1"; @@ -454,33 +521,40 @@ &sdhi0 { pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; &sdhi1 { pinctrl-0 = <&sdhi1_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi1>; vqmmc-supply = <&vccq_sdhi1>; cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + sd-uhs-sdr50; status = "okay"; }; &sdhi2 { pinctrl-0 = <&sdhi2_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi2>; vqmmc-supply = <&vccq_sdhi2>; cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; + sd-uhs-sdr50; status = "okay"; }; @@ -538,6 +612,11 @@ }; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "i2c-exio1"; +}; + &i2c2 { pinctrl-0 = <&i2c2_pins>; pinctrl-names = "default"; @@ -590,7 +669,34 @@ port@1 { reg = <1>; adv7511_out: endpoint { - remote-endpoint = <&hdmi_con>; + remote-endpoint = <&hdmi_con_out>; + }; + }; + }; + }; + + hdmi-in@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + interrupt-parent = <&gpio4>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + default-input = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7612_in: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; + }; + + port@2 { + reg = <2>; + adv7612_out: endpoint { + remote-endpoint = <&vin0ep2>; }; }; }; @@ -672,6 +778,27 @@ cpu0-supply = <&vdd_dvfs>; }; +/* HDMI video input */ +&vin0 { + status = "okay"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep2: endpoint { + remote-endpoint = <&adv7612_out>; + bus-width = <24>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + data-active = <1>; + }; + }; +}; + /* composite video input */ &vin1 { status = "okay"; diff --git a/dts/src/arm/r8a7791.dtsi b/dts/src/arm/r8a7791.dtsi index 162b55c665..87214668d7 100644 --- a/dts/src/arm/r8a7791.dtsi +++ b/dts/src/arm/r8a7791.dtsi @@ -584,6 +584,7 @@ dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -596,6 +597,7 @@ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -608,6 +610,7 @@ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -699,7 +702,7 @@ scifb0: serial@e6c20000 { compatible = "renesas,scifb-r8a7791", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c20000 0 64>; + reg = <0 0xe6c20000 0 0x100>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>; clock-names = "fck"; @@ -713,7 +716,7 @@ scifb1: serial@e6c30000 { compatible = "renesas,scifb-r8a7791", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c30000 0 64>; + reg = <0 0xe6c30000 0 0x100>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>; clock-names = "fck"; @@ -727,7 +730,7 @@ scifb2: serial@e6ce0000 { compatible = "renesas,scifb-r8a7791", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6ce0000 0 64>; + reg = <0 0xe6ce0000 0 0x100>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>; clock-names = "fck"; @@ -1482,6 +1485,16 @@ }; }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7791-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7791-sysc"; reg = <0 0xe6180000 0 0x0200>; diff --git a/dts/src/arm/r8a7792-wheat.dts b/dts/src/arm/r8a7792-wheat.dts index 6dbb94114a..c24f26fdab 100644 --- a/dts/src/arm/r8a7792-wheat.dts +++ b/dts/src/arm/r8a7792-wheat.dts @@ -86,6 +86,34 @@ gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + hdmi-out0 { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con0: endpoint { + remote-endpoint = <&adv7513_0_out>; + }; + }; + }; + + hdmi-out1 { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con1: endpoint { + remote-endpoint = <&adv7513_1_out>; + }; + }; + }; + + osc2_clk: osc2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <74250000>; + }; }; &extal_clk { @@ -128,6 +156,16 @@ groups = "qspi_ctrl", "qspi_data4"; function = "qspi"; }; + + du0_pins: du0 { + groups = "du0_rgb888", "du0_sync", "du0_disp"; + function = "du0"; + }; + + du1_pins: du1 { + groups = "du1_rgb666", "du1_sync", "du1_disp"; + function = "du1"; + }; }; &scif0 { @@ -197,3 +235,91 @@ }; }; }; + +&i2c4 { + status = "okay"; + clock-frequency = <400000>; + + hdmi@3d { + compatible = "adi,adv7513"; + reg = <0x3d>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7513_0_in: endpoint { + remote-endpoint = <&du_out_rgb0>; + }; + }; + + port@1 { + reg = <1>; + adv7513_0_out: endpoint { + remote-endpoint = <&hdmi_con0>; + }; + }; + }; + }; + + hdmi@39 { + compatible = "adi,adv7513"; + reg = <0x39>; + + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,input-style = <1>; + adi,input-justification = "evenly"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7513_1_in: endpoint { + remote-endpoint = <&du_out_rgb1>; + }; + }; + + port@1 { + reg = <1>; + adv7513_1_out: endpoint { + remote-endpoint = <&hdmi_con1>; + }; + }; + }; + }; +}; + +&du { + pinctrl-0 = <&du0_pins &du1_pins>; + pinctrl-names = "default"; + + clocks = <&mstp7_clks R8A7792_CLK_DU0>, <&mstp7_clks R8A7792_CLK_DU1>, + <&osc2_clk>; + clock-names = "du.0", "du.1", "dclkin.0"; + status = "okay"; + + ports { + port@0 { + endpoint { + remote-endpoint = <&adv7513_0_in>; + }; + }; + port@1 { + endpoint { + remote-endpoint = <&adv7513_1_in>; + }; + }; + }; +}; diff --git a/dts/src/arm/r8a7792.dtsi b/dts/src/arm/r8a7792.dtsi index 713141d38b..6ced3c1ec3 100644 --- a/dts/src/arm/r8a7792.dtsi +++ b/dts/src/arm/r8a7792.dtsi @@ -26,6 +26,8 @@ i2c4 = &i2c4; i2c5 = &i2c5; spi0 = &qspi; + spi1 = &msiof0; + spi2 = &msiof1; vin0 = &vin0; vin1 = &vin1; vin2 = &vin2; @@ -118,6 +120,16 @@ IRQ_TYPE_LEVEL_LOW)>; }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7792-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7792-sysc"; reg = <0 0xe6180000 0 0x0200>; @@ -572,6 +584,34 @@ status = "disabled"; }; + msiof0: spi@e6e20000 { + compatible = "renesas,msiof-r8a7792"; + reg = <0 0xe6e20000 0 0x0064>; + interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7792_CLK_MSIOF0>; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + msiof1: spi@e6e10000 { + compatible = "renesas,msiof-r8a7792"; + reg = <0 0xe6e10000 0 0x0064>; + interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp2_clks R8A7792_CLK_MSIOF1>; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + du: display@feb00000 { compatible = "renesas,du-r8a7792"; reg = <0 0xfeb00000 0 0x40000>; @@ -763,6 +803,13 @@ clock-div = <48>; clock-mult = <1>; }; + mp_clk: mp { + compatible = "fixed-factor-clock"; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-div = <15>; + clock-mult = <1>; + }; m2_clk: m2 { compatible = "fixed-factor-clock"; clocks = <&cpg_clocks R8A7792_CLK_PLL1>; @@ -793,6 +840,15 @@ }; /* Gate clocks */ + mstp0_clks: mstp0_clks@e6150130 { + compatible = "renesas,r8a7792-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; + clocks = <&mp_clk>; + #clock-cells = <1>; + clock-indices = <R8A7792_CLK_MSIOF0>; + clock-output-names = "msiof0"; + }; mstp1_clks: mstp1_clks@e6150134 { compatible = "renesas,r8a7792-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -811,12 +867,13 @@ compatible = "renesas,r8a7792-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; - clocks = <&zs_clk>, <&zs_clk>; + clocks = <&mp_clk>, <&zs_clk>, <&zs_clk>; #clock-cells = <1>; clock-indices = < + R8A7792_CLK_MSIOF1 R8A7792_CLK_SYS_DMAC1 R8A7792_CLK_SYS_DMAC0 >; - clock-output-names = "sys-dmac1", "sys-dmac0"; + clock-output-names = "msiof1", "sys-dmac1", "sys-dmac0"; }; mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7792-mstp-clocks", diff --git a/dts/src/arm/r8a7793-gose.dts b/dts/src/arm/r8a7793-gose.dts index 90af186001..dc311eba44 100644 --- a/dts/src/arm/r8a7793-gose.dts +++ b/dts/src/arm/r8a7793-gose.dts @@ -346,18 +346,18 @@ }; sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; - renesas,function = "sdhi0"; + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; }; sdhi1_pins: sd1 { - renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; - renesas,function = "sdhi1"; + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; }; sdhi2_pins: sd2 { - renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; - renesas,function = "sdhi2"; + groups = "sdhi2_data4", "sdhi2_ctrl"; + function = "sdhi2"; }; qspi_pins: qspi { diff --git a/dts/src/arm/r8a7793.dtsi b/dts/src/arm/r8a7793.dtsi index 8d02aacf28..2fb527ca0b 100644 --- a/dts/src/arm/r8a7793.dtsi +++ b/dts/src/arm/r8a7793.dtsi @@ -666,7 +666,7 @@ scifb0: serial@e6c20000 { compatible = "renesas,scifb-r8a7793", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c20000 0 64>; + reg = <0 0xe6c20000 0 0x100>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>; clock-names = "fck"; @@ -680,7 +680,7 @@ scifb1: serial@e6c30000 { compatible = "renesas,scifb-r8a7793", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c30000 0 64>; + reg = <0 0xe6c30000 0 0x100>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>; clock-names = "fck"; @@ -694,7 +694,7 @@ scifb2: serial@e6ce0000 { compatible = "renesas,scifb-r8a7793", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6ce0000 0 64>; + reg = <0 0xe6ce0000 0 0x100>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>; clock-names = "fck"; @@ -852,6 +852,33 @@ status = "disabled"; }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7793_CLK_VIN0>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7793_CLK_VIN1>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + status = "disabled"; + }; + + vin2: video@e6ef2000 { + compatible = "renesas,vin-r8a7793", "renesas,rcar-gen2-vin"; + reg = <0 0xe6ef2000 0 0x1000>; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7793_CLK_VIN2>; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + status = "disabled"; + }; + qspi: spi@e6b10000 { compatible = "renesas,qspi-r8a7793", "renesas,qspi"; reg = <0 0xe6b10000 0 0x2c>; @@ -1279,6 +1306,16 @@ }; }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7793-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7793-sysc"; reg = <0 0xe6180000 0 0x0200>; diff --git a/dts/src/arm/r8a7794-alt.dts b/dts/src/arm/r8a7794-alt.dts index 8d1b35afaf..569e3f0e97 100644 --- a/dts/src/arm/r8a7794-alt.dts +++ b/dts/src/arm/r8a7794-alt.dts @@ -18,6 +18,8 @@ aliases { serial0 = &scif2; + i2c10 = &gpioi2c4; + i2c12 = &i2cexio4; }; chosen { @@ -135,6 +137,29 @@ #clock-cells = <0>; clock-frequency = <148500000>; }; + + gpioi2c4: i2c-10 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + status = "disabled"; + gpios = <&gpio4 9 GPIO_ACTIVE_HIGH /* sda */ + &gpio4 8 GPIO_ACTIVE_HIGH /* scl */ + >; + i2c-gpio,delay-us = <5>; + }; + + /* + * I2C4 is routed to EXIO connector B, pins 73 (SCL) + 74 (SDA). + * A fallback to GPIO is provided. + */ + i2cexio4: i2c-14 { + compatible = "i2c-demux-pinctrl"; + i2c-parent = <&i2c4>, <&gpioi2c4>; + i2c-bus-name = "i2c-exio4"; + #address-cells = <1>; + #size-cells = <0>; + }; }; &du { @@ -165,8 +190,8 @@ pinctrl-names = "default"; du_pins: du { - groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_dotclkout0"; - function = "du"; + groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out"; + function = "du1"; }; scif2_pins: scif2 { @@ -194,6 +219,11 @@ function = "i2c1"; }; + i2c4_pins: i2c4 { + groups = "i2c4"; + function = "i2c4"; + }; + vin0_pins: vin0 { groups = "vin0_data8", "vin0_clk"; function = "vin0"; @@ -207,11 +237,25 @@ sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; }; sdhi1_pins: sd1 { groups = "sdhi1_data4", "sdhi1_ctrl"; function = "sdhi1"; + power-source = <3300>; + }; + + sdhi1_pins_uhs: sd1_uhs { + groups = "sdhi1_data4", "sdhi1_ctrl"; + function = "sdhi1"; + power-source = <1800>; }; }; @@ -255,23 +299,28 @@ &sdhi0 { pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>; + sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; &sdhi1 { pinctrl-0 = <&sdhi1_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi1_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi1>; vqmmc-supply = <&vccq_sdhi1>; cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + sd-uhs-sdr50; status = "okay"; }; @@ -296,6 +345,11 @@ }; }; +&i2c4 { + pinctrl-0 = <&i2c4_pins>; + pinctrl-names = "i2c-exio4"; +}; + &vin0 { status = "okay"; pinctrl-0 = <&vin0_pins>; diff --git a/dts/src/arm/r8a7794.dtsi b/dts/src/arm/r8a7794.dtsi index 9365580a19..fb576dba74 100644 --- a/dts/src/arm/r8a7794.dtsi +++ b/dts/src/arm/r8a7794.dtsi @@ -319,7 +319,7 @@ "ch12"; clocks = <&mstp5_clks R8A7794_CLK_AUDIO_DMAC0>; clock-names = "fck"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #dma-cells = <1>; dma-channels = <13>; }; @@ -411,7 +411,7 @@ scifb0: serial@e6c20000 { compatible = "renesas,scifb-r8a7794", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c20000 0 64>; + reg = <0 0xe6c20000 0 0x100>; interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>; clock-names = "fck"; @@ -425,7 +425,7 @@ scifb1: serial@e6c30000 { compatible = "renesas,scifb-r8a7794", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6c30000 0 64>; + reg = <0 0xe6c30000 0 0x100>; interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>; clock-names = "fck"; @@ -439,7 +439,7 @@ scifb2: serial@e6ce0000 { compatible = "renesas,scifb-r8a7794", "renesas,rcar-gen2-scifb", "renesas,scifb"; - reg = <0 0xe6ce0000 0 64>; + reg = <0 0xe6ce0000 0 0x100>; interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>; clock-names = "fck"; @@ -731,6 +731,7 @@ dmas = <&dmac0 0xcd>, <&dmac0 0xce>, <&dmac1 0xcd>, <&dmac1 0xce>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -743,6 +744,7 @@ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, <&dmac1 0xc1>, <&dmac1 0xc2>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -755,6 +757,7 @@ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, <&dmac1 0xd3>, <&dmac1 0xd4>; dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -1025,8 +1028,7 @@ clocks = <&extal_clk &usb_extal_clk>; #clock-cells = <1>; clock-output-names = "main", "pll0", "pll1", "pll3", - "lb", "qspi", "sdh", "sd0", "z", - "rcan"; + "lb", "qspi", "sdh", "sd0", "rcan"; #power-domain-cells = <0>; }; /* Variable factor clocks */ @@ -1260,7 +1262,7 @@ mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; - clocks = <&mp_clk>, <&mp_clk>, + clocks = <&mp_clk>, <&hp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&zx_clk>; @@ -1375,6 +1377,16 @@ }; }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7794-rst"; + reg = <0 0xe6160000 0 0x0100>; + }; + + prr: chipid@ff000044 { + compatible = "renesas,prr"; + reg = <0 0xff000044 0 4>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7794-sysc"; reg = <0 0xe6180000 0 0x0200>; @@ -1483,67 +1495,67 @@ "mix.0", "mix.1", "dvc.0", "dvc.1", "clk_a", "clk_b", "clk_c", "clk_i"; - power-domains = <&cpg_clocks>; + power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; rcar_sound,dvc { - dvc0: dvc@0 { + dvc0: dvc-0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; - dvc1: dvc@1 { + dvc1: dvc-1 { dmas = <&audma0 0xbe>; dma-names = "tx"; }; }; rcar_sound,mix { - mix0: mix@0 { }; - mix1: mix@1 { }; + mix0: mix-0 { }; + mix1: mix-1 { }; }; rcar_sound,ctu { - ctu00: ctu@0 { }; - ctu01: ctu@1 { }; - ctu02: ctu@2 { }; - ctu03: ctu@3 { }; - ctu10: ctu@4 { }; - ctu11: ctu@5 { }; - ctu12: ctu@6 { }; - ctu13: ctu@7 { }; + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; }; rcar_sound,src { - src@0 { + src-0 { status = "disabled"; }; - src1: src@1 { + src1: src-1 { interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma0 0x9c>; dma-names = "rx", "tx"; }; - src2: src@2 { + src2: src-2 { interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma0 0x9e>; dma-names = "rx", "tx"; }; - src3: src@3 { + src3: src-3 { interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma0 0xa0>; dma-names = "rx", "tx"; }; - src4: src@4 { + src4: src-4 { interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma0 0xb0>; dma-names = "rx", "tx"; }; - src5: src@5 { + src5: src-5 { interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma0 0xb2>; dma-names = "rx", "tx"; }; - src6: src@6 { + src6: src-6 { interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma0 0xb4>; dma-names = "rx", "tx"; @@ -1551,61 +1563,61 @@ }; rcar_sound,ssi { - ssi0: ssi@0 { + ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma0 0x02>, <&audma0 0x15>, <&audma0 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi1: ssi@1 { + ssi1: ssi-1 { interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma0 0x04>, <&audma0 0x49>, <&audma0 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi2: ssi@2 { + ssi2: ssi-2 { interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma0 0x06>, <&audma0 0x63>, <&audma0 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi3: ssi@3 { + ssi3: ssi-3 { interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma0 0x08>, <&audma0 0x6f>, <&audma0 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi4: ssi@4 { + ssi4: ssi-4 { interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma0 0x0a>, <&audma0 0x71>, <&audma0 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi5: ssi@5 { + ssi5: ssi-5 { interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma0 0x0c>, <&audma0 0x73>, <&audma0 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi6: ssi@6 { + ssi6: ssi-6 { interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma0 0x0e>, <&audma0 0x75>, <&audma0 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi7: ssi@7 { + ssi7: ssi-7 { interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma0 0x10>, <&audma0 0x79>, <&audma0 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi8: ssi@8 { + ssi8: ssi-8 { interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma0 0x12>, <&audma0 0x7b>, <&audma0 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi9: ssi@9 { + ssi9: ssi-9 { interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma0 0x14>, <&audma0 0x7d>, <&audma0 0x7e>; diff --git a/dts/src/arm/rk1108-evb.dts b/dts/src/arm/rk1108-evb.dts new file mode 100644 index 0000000000..3956cff4ca --- /dev/null +++ b/dts/src/arm/rk1108-evb.dts @@ -0,0 +1,69 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "rk1108.dtsi" + +/ { + model = "Rockchip RK1108 Evaluation board"; + compatible = "rockchip,rk1108-evb", "rockchip,rk1108"; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x08000000>; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/dts/src/arm/rk1108.dtsi b/dts/src/arm/rk1108.dtsi new file mode 100644 index 0000000000..d7700235e0 --- /dev/null +++ b/dts/src/arm/rk1108.dtsi @@ -0,0 +1,452 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/rk1108-cru.h> +#include <dt-bindings/pinctrl/rockchip.h> +/ { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "rockchip,rk1108"; + + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + clock-frequency = <24000000>; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pdma: pdma@102a0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x102a0000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + }; + }; + + bus_intmem@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10080000 0x2000>; + }; + + uart2: serial@10210000 { + compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart"; + reg = <0x10210000 0x100>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "disabled"; + }; + + uart1: serial@10220000 { + compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart"; + reg = <0x10220000 0x100>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; + status = "disabled"; + }; + + uart0: serial@10230000 { + compatible = "rockchip,rk1108-uart", "snps,dw-apb-uart"; + reg = <0x10230000 0x100>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "disabled"; + }; + + grf: syscon@10300000 { + compatible = "rockchip,rk1108-grf", "syscon"; + reg = <0x10300000 0x1000>; + }; + + pmugrf: syscon@20060000 { + compatible = "rockchip,rk1108-pmugrf", "syscon"; + reg = <0x20060000 0x1000>; + }; + + cru: clock-controller@20200000 { + compatible = "rockchip,rk1108-cru"; + reg = <0x20200000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + emmc: dwmmc@30110000 { + compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x30110000 0x4000>; + status = "disabled"; + }; + + sdio: dwmmc@30120000 { + compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 150000000>; + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, + <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x30120000 0x4000>; + status = "disabled"; + }; + + sdmmc: dwmmc@30130000 { + compatible = "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc"; + clock-freq-min-max = <400000 100000000>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + fifo-depth = <0x100>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x30130000 0x4000>; + status = "disabled"; + }; + + gic: interrupt-controller@32010000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0x32011000 0x1000>, + <0x32012000 0x1000>, + <0x32014000 0x2000>, + <0x32016000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk1108-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmugrf>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@20030000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20030000 0x100>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xin24m>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@10310000 { + compatible = "rockchip,gpio-bank"; + reg = <0x10310000 0x100>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xin24m>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@10320000 { + compatible = "rockchip,gpio-bank"; + reg = <0x10320000 0x100>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xin24m>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@10330000 { + compatible = "rockchip,gpio-bank"; + reg = <0x10330000 0x100>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xin24m>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { + drive-strength = <8>; + }; + + pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma { + drive-strength = <12>; + }; + + pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_none_drv_4ma: pcfg-pull-none-drv-4ma { + drive-strength = <4>; + }; + + pcfg_pull_up_drv_4ma: pcfg-pull-up-drv-4ma { + bias-pull-up; + drive-strength = <4>; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_input_high: pcfg-input-high { + bias-pull-up; + input-enable; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>, + <2 RK_PD4 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + i2c2m1 { + i2c2m1_xfer: i2c2m1-xfer { + rockchip,pins = <0 RK_PC2 RK_FUNC_2 &pcfg_pull_none>, + <0 RK_PC6 RK_FUNC_3 &pcfg_pull_none>; + }; + + i2c2m1_gpio: i2c2m1-gpio { + rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>, + <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + i2c2m05v { + i2c2m05v_xfer: i2c2m05v-xfer { + rockchip,pins = <1 RK_PD5 RK_FUNC_2 &pcfg_pull_none>, + <1 RK_PD4 RK_FUNC_2 &pcfg_pull_none>; + }; + + i2c2m05v_gpio: i2c2m05v-gpio { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>, + <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <0 RK_PB6 RK_FUNC_1 &pcfg_pull_none>, + <0 RK_PC4 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + }; + + sdmmc_cd: sdmmc-cd { + rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>, + <3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <3 RK_PA6 RK_FUNC_1 &pcfg_pull_up>, + <3 RK_PA5 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <3 RK_PA4 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <3 RK_PA3 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts_gpio: uart0-rts-gpio { + rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <1 RK_PD3 RK_FUNC_1 &pcfg_pull_up>, + <1 RK_PD2 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <1 RK_PD0 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <1 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart2m0 { + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = <2 RK_PD2 RK_FUNC_1 &pcfg_pull_up>, + <2 RK_PD1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart2m1 { + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = <3 RK_PC3 RK_FUNC_2 &pcfg_pull_up>, + <3 RK_PC2 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + uart2_5v { + uart2_5v_cts: uart2_5v-cts { + rockchip,pins = <1 RK_PD4 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart2_5v_rts: uart2_5v-rts { + rockchip,pins = <1 RK_PD5 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + }; +}; diff --git a/dts/src/arm/rk3036-evb.dts b/dts/src/arm/rk3036-evb.dts index 8db9e9b197..2f5f15524f 100644 --- a/dts/src/arm/rk3036-evb.dts +++ b/dts/src/arm/rk3036-evb.dts @@ -46,7 +46,7 @@ model = "Rockchip RK3036 Evaluation board"; compatible = "rockchip,rk3036-evb", "rockchip,rk3036"; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; diff --git a/dts/src/arm/rk3036-kylin.dts b/dts/src/arm/rk3036-kylin.dts index 1df1557a46..3de958ec29 100644 --- a/dts/src/arm/rk3036-kylin.dts +++ b/dts/src/arm/rk3036-kylin.dts @@ -46,7 +46,7 @@ model = "Rockchip RK3036 KylinBoard"; compatible = "rockchip,rk3036-kylin", "rockchip,rk3036"; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x20000000>; }; diff --git a/dts/src/arm/rk3036.dtsi b/dts/src/arm/rk3036.dtsi index a935523a1e..4ed49a243e 100644 --- a/dts/src/arm/rk3036.dtsi +++ b/dts/src/arm/rk3036.dtsi @@ -44,9 +44,11 @@ #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3036-cru.h> #include <dt-bindings/soc/rockchip,boot-mode.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + compatible = "rockchip,rk3036"; interrupt-parent = <&gic>; @@ -204,7 +206,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <275>; g-tx-fifo-size = <256 128 128 64 64 32>; - g-use-dma; status = "disabled"; }; @@ -244,7 +245,7 @@ compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x10214000 0x4000>; clock-frequency = <37500000>; - clock-freq-min-max = <400000 37500000>; + max-frequency = <37500000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; clock-names = "biu", "ciu"; fifo-depth = <0x100>; @@ -255,7 +256,7 @@ sdio: dwmmc@10218000 { compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x10218000 0x4000>; - clock-freq-min-max = <400000 37500000>; + max-frequency = <37500000>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; @@ -271,7 +272,7 @@ bus-width = <8>; cap-mmc-highspeed; clock-frequency = <37500000>; - clock-freq-min-max = <400000 37500000>; + max-frequency = <37500000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; diff --git a/dts/src/arm/rk3066a-bqcurie2.dts b/dts/src/arm/rk3066a-bqcurie2.dts index bc674ee206..c0d8b5446b 100644 --- a/dts/src/arm/rk3066a-bqcurie2.dts +++ b/dts/src/arm/rk3066a-bqcurie2.dts @@ -49,7 +49,7 @@ model = "bq Curie 2"; compatible = "mundoreader,bq-curie2", "rockchip,rk3066a"; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; diff --git a/dts/src/arm/rk3066a-marsboard.dts b/dts/src/arm/rk3066a-marsboard.dts index a2b763e949..0a54c4beff 100644 --- a/dts/src/arm/rk3066a-marsboard.dts +++ b/dts/src/arm/rk3066a-marsboard.dts @@ -47,7 +47,7 @@ model = "MarsBoard RK3066"; compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a"; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; diff --git a/dts/src/arm/rk3066a-mk808.dts b/dts/src/arm/rk3066a-mk808.dts new file mode 100644 index 0000000000..658eb7ddea --- /dev/null +++ b/dts/src/arm/rk3066a-mk808.dts @@ -0,0 +1,195 @@ +/* + * Copyright (c) 2016 PaweÅ‚ Jarosz <paweljarosz3691@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3066a.dtsi" + +/ { + model = "Rikomagic MK808"; + compatible = "rikomagic,mk808", "rockchip,rk3066a"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory@60000000 { + reg = <0x60000000 0x40000000>; + device_type = "memory"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + blue { + label = "mk808:blue:power"; + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "default-on"; + }; + }; + + vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_host: usb-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&host_drv>; + pinctrl-names = "default"; + regulator-always-on; + regulator-name = "host-pwr"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vcc_otg: usb-otg-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&otg_drv>; + pinctrl-names = "default"; + regulator-always-on; + regulator-name = "vcc_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&sdmmc_pwr>; + pinctrl-names = "default"; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vcc_wifi: sdio-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&wifi_pwr>; + pinctrl-names = "default"; + regulator-name = "vcc_wifi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; +}; + +&mmc0 { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + num-slots = <1>; + vmmc-supply = <&vcc_sd>; + status = "okay"; +}; + +&mmc1 { + bus-width = <4>; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&vcc_wifi>; + status = "okay"; +}; + +&pinctrl { + usb-host { + host_drv: host-drv { + rockchip,pins = <RK_GPIO0 6 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + usb-otg { + otg_drv: otg-drv { + rockchip,pins = <RK_GPIO0 5 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <RK_GPIO3 7 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + sdio { + wifi_pwr: wifi-pwr { + rockchip,pins = <RK_GPIO3 24 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/dts/src/arm/rk3066a-rayeager.dts b/dts/src/arm/rk3066a-rayeager.dts index 6e7f2187a0..82465b6444 100644 --- a/dts/src/arm/rk3066a-rayeager.dts +++ b/dts/src/arm/rk3066a-rayeager.dts @@ -48,7 +48,7 @@ model = "Rayeager PX2"; compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; diff --git a/dts/src/arm/rk3066a.dtsi b/dts/src/arm/rk3066a.dtsi index 0d0dae3a16..e498c362b9 100644 --- a/dts/src/arm/rk3066a.dtsi +++ b/dts/src/arm/rk3066a.dtsi @@ -151,6 +151,14 @@ #clock-cells = <1>; #reset-cells = <1>; + assigned-clocks = <&cru PLL_CPLL>, <&cru PLL_GPLL>, + <&cru ACLK_CPU>, <&cru HCLK_CPU>, + <&cru PCLK_CPU>, <&cru ACLK_PERI>, + <&cru HCLK_PERI>, <&cru PCLK_PERI>; + assigned-clock-rates = <400000000>, <594000000>, + <300000000>, <150000000>, + <75000000>, <300000000>, + <150000000>, <75000000>; }; timer@2000e000 { @@ -162,7 +170,7 @@ }; efuse: efuse@20010000 { - compatible = "rockchip,rockchip-efuse"; + compatible = "rockchip,rk3066a-efuse"; reg = <0x20010000 0x4000>; #address-cells = <1>; #size-cells = <1>; @@ -197,7 +205,7 @@ clock-names = "saradc", "apb_pclk"; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; #io-channel-cells = <1>; - resets = <&cru SRST_SARADC>; + resets = <&cru SRST_TSADC>; reset-names = "saradc-apb"; status = "disabled"; }; @@ -628,15 +636,26 @@ }; &mmc0 { + clock-frequency = <50000000>; + dmas = <&dmac2 1>; + dma-names = "rx-tx"; + max-frequency = <50000000>; pinctrl-names = "default"; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>; }; &mmc1 { + dmas = <&dmac2 3>; + dma-names = "rx-tx"; pinctrl-names = "default"; pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>; }; +&emmc { + dmas = <&dmac2 4>; + dma-names = "rx-tx"; +}; + &pwm0 { pinctrl-names = "default"; pinctrl-0 = <&pwm0_out>; @@ -668,21 +687,29 @@ }; &uart0 { + dmas = <&dmac1_s 0>, <&dmac1_s 1>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>; }; &uart1 { + dmas = <&dmac1_s 2>, <&dmac1_s 3>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart1_xfer>; }; &uart2 { + dmas = <&dmac2 6>, <&dmac2 7>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart2_xfer>; }; &uart3 { + dmas = <&dmac2 8>, <&dmac2 9>; + dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&uart3_xfer>; }; diff --git a/dts/src/arm/rk3188-px3-evb.dts b/dts/src/arm/rk3188-px3-evb.dts new file mode 100644 index 0000000000..df727bafd6 --- /dev/null +++ b/dts/src/arm/rk3188-px3-evb.dts @@ -0,0 +1,328 @@ +/* + * Copyright (c) 2016 Andy Yan <andy.yan@rock-chips.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include "rk3188.dtsi" + +/ { + model = "Rockchip PX3-EVB"; + compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory@60000000 { + reg = <0x60000000 0x80000000>; + device_type = "memory"; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + power { + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "GPIO Key Power"; + linux,input-type = <1>; + wakeup-source; + debounce-interval = <100>; + }; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + accelerometer@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&gpio0>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + rk808: pmic@1c { + compatible = "rockchip,rk818"; + reg = <0x1c>; + interrupt-parent = <&gpio0>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_io>; + vcc9-supply = <&vcc_io>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_arm"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_cif: LDO_REG1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_cif"; + }; + + vcc_jetta33: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_jetta33"; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + lvds_12: LDO_REG4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "lvds_12"; + }; + + lvds_25: LDO_REG5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "lvds_25"; + }; + + cif_18: LDO_REG6 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "cif_18"; + }; + + vcc_sd: LDO_REG7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_sd"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + wl_18: LDO_REG8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "wl_18"; + }; + + lcd_33: SWITCH_REG1 { + regulator-name = "lcd_33"; + }; + }; + }; + +}; + +&i2c2 { + gsl1680: touchscreen@40 { + compatible = "silead,gsl1680"; + reg = <0x40>; + interrupt-parent = <&gpio1>; + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + power-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <800>; + touchscreen-size-y = <1280>; + silead,max-fingers = <5>; + }; +}; + +&mmc0 { + num-slots = <1>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; + vmmc-supply = <&vcc_sd>; + + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; +}; + +&pinctrl { + pcfg_output_low: pcfg-output-low { + output-low; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + otg_vbus_drv: otg-vbus-drv { + rockchip,pins = <2 31 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/dts/src/arm/rk3188-radxarock.dts b/dts/src/arm/rk3188-radxarock.dts index 1da46d1380..5e8a235ed0 100644 --- a/dts/src/arm/rk3188-radxarock.dts +++ b/dts/src/arm/rk3188-radxarock.dts @@ -48,7 +48,7 @@ model = "Radxa Rock"; compatible = "radxa,rock", "rockchip,rk3188"; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x80000000>; }; diff --git a/dts/src/arm/rk3188.dtsi b/dts/src/arm/rk3188.dtsi index 31f81b265c..869e189331 100644 --- a/dts/src/arm/rk3188.dtsi +++ b/dts/src/arm/rk3188.dtsi @@ -147,7 +147,7 @@ }; efuse: efuse@20010000 { - compatible = "rockchip,rockchip-efuse"; + compatible = "rockchip,rk3188-efuse"; reg = <0x20010000 0x4000>; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/rk3228-evb.dts b/dts/src/arm/rk3228-evb.dts index 904668e2e6..58834330a5 100644 --- a/dts/src/arm/rk3228-evb.dts +++ b/dts/src/arm/rk3228-evb.dts @@ -46,7 +46,7 @@ model = "Rockchip RK3228 Evaluation board"; compatible = "rockchip,rk3228-evb", "rockchip,rk3228"; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; diff --git a/dts/src/arm/rk3229-evb.dts b/dts/src/arm/rk3229-evb.dts index b6a12035a6..dcdd0cee61 100644 --- a/dts/src/arm/rk3229-evb.dts +++ b/dts/src/arm/rk3229-evb.dts @@ -46,7 +46,7 @@ model = "Rockchip RK3229 Evaluation board"; compatible = "rockchip,rk3229-evb", "rockchip,rk3229"; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; diff --git a/dts/src/arm/rk322x.dtsi b/dts/src/arm/rk322x.dtsi index 9e6bf0e311..9d3aee5abc 100644 --- a/dts/src/arm/rk322x.dtsi +++ b/dts/src/arm/rk322x.dtsi @@ -44,9 +44,11 @@ #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/clock/rk3228-cru.h> #include <dt-bindings/thermal/thermal.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; aliases { @@ -402,7 +404,7 @@ reg = <0x30020000 0x4000>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clock-frequency = <37500000>; - clock-freq-min-max = <400000 37500000>; + max-frequency = <37500000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; diff --git a/dts/src/arm/rk3288-evb.dtsi b/dts/src/arm/rk3288-evb.dtsi index d59208b5eb..bf7ccfad32 100644 --- a/dts/src/arm/rk3288-evb.dtsi +++ b/dts/src/arm/rk3288-evb.dtsi @@ -43,7 +43,7 @@ #include "rk3288.dtsi" / { - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000>; }; diff --git a/dts/src/arm/rk3288-fennec.dts b/dts/src/arm/rk3288-fennec.dts index 2e3c34135e..805c0d2677 100644 --- a/dts/src/arm/rk3288-fennec.dts +++ b/dts/src/arm/rk3288-fennec.dts @@ -46,7 +46,7 @@ model = "Rockchip RK3288 Fennec Board"; compatible = "rockchip,rk3288-fennec", "rockchip,rk3288"; - memory { + memory@0 { reg = <0x0 0x80000000>; device_type = "memory"; }; diff --git a/dts/src/arm/rk3288-firefly-reload-core.dtsi b/dts/src/arm/rk3288-firefly-reload-core.dtsi index ec418c99de..d242588bae 100644 --- a/dts/src/arm/rk3288-firefly-reload-core.dtsi +++ b/dts/src/arm/rk3288-firefly-reload-core.dtsi @@ -45,7 +45,7 @@ #include "rk3288.dtsi" / { - memory { + memory@0 { device_type = "memory"; reg = <0 0x80000000>; }; diff --git a/dts/src/arm/rk3288-firefly.dtsi b/dts/src/arm/rk3288-firefly.dtsi index 114c90fb65..44935af1fb 100644 --- a/dts/src/arm/rk3288-firefly.dtsi +++ b/dts/src/arm/rk3288-firefly.dtsi @@ -44,7 +44,7 @@ #include "rk3288.dtsi" / { - memory { + memory@0 { device_type = "memory"; reg = <0 0x80000000>; }; diff --git a/dts/src/arm/rk3288-miqi.dts b/dts/src/arm/rk3288-miqi.dts index 24488421f0..441d450fd1 100644 --- a/dts/src/arm/rk3288-miqi.dts +++ b/dts/src/arm/rk3288-miqi.dts @@ -52,7 +52,7 @@ stdout-path = "serial2:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0 0x80000000>; }; diff --git a/dts/src/arm/rk3288-popmetal.dts b/dts/src/arm/rk3288-popmetal.dts index 56dd377d56..bc6d10054f 100644 --- a/dts/src/arm/rk3288-popmetal.dts +++ b/dts/src/arm/rk3288-popmetal.dts @@ -48,7 +48,7 @@ model = "PopMetal-RK3288"; compatible = "chipspark,popmetal-rk3288", "rockchip,rk3288"; - memory{ + memory@0 { device_type = "memory"; reg = <0 0x80000000>; }; @@ -68,7 +68,7 @@ pinctrl-0 = <&pwrbtn>; power { - gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; label = "GPIO Key Power"; linux,input-type = <1>; @@ -79,7 +79,7 @@ ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -94,7 +94,7 @@ vcc_sd: sdmmc-regulator { compatible = "regulator-fixed"; - gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + gpio = <&gpio7 RK_PB3 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_pwr>; regulator-name = "vcc_sd"; @@ -128,7 +128,7 @@ vcc28_dvp: vcc28-dvp-regulator { compatible = "regulator-fixed"; enable-active-high; - gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; + gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&dvp_pwr>; regulator-name = "vcc28_dvp"; @@ -147,6 +147,8 @@ bus-width = <8>; cap-mmc-highspeed; disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; non-removable; num-slots = <1>; pinctrl-names = "default"; @@ -165,6 +167,10 @@ num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; vmmc-supply = <&vcc_sd>; vqmmc-supply = <&vccio_sd>; status = "okay"; @@ -174,7 +180,7 @@ phy-supply = <&vcc_lan>; phy-mode = "rgmii"; clock_in_out = "input"; - snps,reset-gpio = <&gpio4 7 0>; + snps,reset-gpio = <&gpio4 RK_PB0 0>; snps,reset-active-low; snps,reset-delays-us = <0 10000 1000000>; assigned-clocks = <&cru SCLK_MAC>; @@ -280,7 +286,7 @@ vccio_sd: LDO_REG2 { regulator-always-on; regulator-boot-on; - regulator-min-microvolt = <3300000>; + regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-name = "vccio_sd"; regulator-state-mem { @@ -443,43 +449,43 @@ &pinctrl { ak8963 { comp_int: comp-int { - rockchip,pins = <8 1 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>; }; }; buttons { pwrbtn: pwrbtn { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; dvp { dvp_pwr: dvp-pwr { - rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; }; }; ir { ir_int: ir-int { - rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>; }; }; mma8452 { gsensor_int: gsensor-int { - rockchip,pins = <8 0 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <8 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>; }; }; pmic { pmic_int: pmic-int { - rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>; }; }; sdmmc { sdmmc_pwr: sdmmc-pwr { - rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <7 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; }; diff --git a/dts/src/arm/rk3288-r89.dts b/dts/src/arm/rk3288-r89.dts index 4b8a8adb24..04faa72dbd 100644 --- a/dts/src/arm/rk3288-r89.dts +++ b/dts/src/arm/rk3288-r89.dts @@ -48,7 +48,7 @@ / { compatible = "netxeon,r89", "rockchip,rk3288"; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000>; }; diff --git a/dts/src/arm/rk3288-rock2-som.dtsi b/dts/src/arm/rk3288-rock2-som.dtsi index bb1f01e037..b25ba806d5 100644 --- a/dts/src/arm/rk3288-rock2-som.dtsi +++ b/dts/src/arm/rk3288-rock2-som.dtsi @@ -42,7 +42,7 @@ #include "rk3288.dtsi" / { - memory { + memory@0 { reg = <0x0 0x80000000>; device_type = "memory"; }; diff --git a/dts/src/arm/rk3288-veyron.dtsi b/dts/src/arm/rk3288-veyron.dtsi index 3dd2cca48c..2251d28e9d 100644 --- a/dts/src/arm/rk3288-veyron.dtsi +++ b/dts/src/arm/rk3288-veyron.dtsi @@ -47,7 +47,7 @@ #include "rk3288.dtsi" / { - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x80000000>; }; diff --git a/dts/src/arm/rk3288.dtsi b/dts/src/arm/rk3288.dtsi index 17ec2e2d7a..4fad13368a 100644 --- a/dts/src/arm/rk3288.dtsi +++ b/dts/src/arm/rk3288.dtsi @@ -46,9 +46,11 @@ #include <dt-bindings/thermal/thermal.h> #include <dt-bindings/power/rk3288-power.h> #include <dt-bindings/soc/rockchip,boot-mode.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + compatible = "rockchip,rk3288"; interrupt-parent = <&gic>; @@ -227,7 +229,7 @@ sdmmc: dwmmc@ff0c0000 { compatible = "rockchip,rk3288-dw-mshc"; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -239,7 +241,7 @@ sdio0: dwmmc@ff0d0000 { compatible = "rockchip,rk3288-dw-mshc"; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -251,7 +253,7 @@ sdio1: dwmmc@ff0e0000 { compatible = "rockchip,rk3288-dw-mshc"; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>, <&cru SCLK_SDIO1_DRV>, <&cru SCLK_SDIO1_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -263,7 +265,7 @@ emmc: dwmmc@ff0f0000 { compatible = "rockchip,rk3288-dw-mshc"; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -596,7 +598,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <275>; g-tx-fifo-size = <256 128 128 64 64 32>; - g-use-dma; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; @@ -1116,7 +1117,7 @@ }; efuse: efuse@ffb40000 { - compatible = "rockchip,rockchip-efuse"; + compatible = "rockchip,rk3288-efuse"; reg = <0xffb40000 0x20>; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm/rk3xxx.dtsi b/dts/src/arm/rk3xxx.dtsi index e15beb3c67..0b45811cf2 100644 --- a/dts/src/arm/rk3xxx.dtsi +++ b/dts/src/arm/rk3xxx.dtsi @@ -44,9 +44,11 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/soc/rockchip,boot-mode.h> -#include "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&gic>; aliases { @@ -181,7 +183,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <275>; g-tx-fifo-size = <256 128 128 64 64 32>; - g-use-dma; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; diff --git a/dts/src/arm/sama5d2.dtsi b/dts/src/arm/sama5d2.dtsi index 7173ec9059..ceb9783ff7 100644 --- a/dts/src/arm/sama5d2.dtsi +++ b/dts/src/arm/sama5d2.dtsi @@ -735,6 +735,11 @@ atmel,clk-output-range = <0 83000000>; }; + securam_clk: securam_clk { + #clock-cells = <0>; + reg = <51>; + }; + i2s0_clk: i2s0_clk { #clock-cells = <0>; reg = <54>; @@ -1030,6 +1035,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&twi0_clk>; + atmel,fifo-size = <16>; status = "disabled"; }; @@ -1058,6 +1064,15 @@ status = "disabled"; }; + securam: sram@f8044000 { + compatible = "atmel,sama5d2-securam", "mmio-sram"; + reg = <0xf8044000 0x1420>; + clocks = <&securam_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xf8044000 0x1420>; + }; + rstc@f8048000 { compatible = "atmel,sama5d3-rstc"; reg = <0xf8048000 0x10>; @@ -1088,30 +1103,12 @@ status = "disabled"; }; - sckc@f8048050 { - compatible = "atmel,at91sam9x5-sckc"; + clk32k: sckc@f8048050 { + compatible = "atmel,sama5d4-sckc"; reg = <0xf8048050 0x4>; - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-accuracy = <250000000>; - atmel,startup-time-usec = <75>; - }; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - clocks = <&slow_xtal>; - atmel,startup-time-usec = <1200000>; - }; - - clk32k: slowck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_osc>; - }; + clocks = <&slow_xtal>; + #clock-cells = <0>; }; rtc@f80480b0 { @@ -1231,6 +1228,7 @@ #address-cells = <1>; #size-cells = <0>; clocks = <&twi1_clk>; + atmel,fifo-size = <16>; status = "disabled"; }; @@ -1260,6 +1258,11 @@ clocks = <&pioA_clk>; }; + secumod@fc040000 { + compatible = "atmel,sama5d2-secumod", "syscon"; + reg = <0xfc040000 0x100>; + }; + tdes@fc044000 { compatible = "atmel,at91sam9g46-tdes"; reg = <0xfc044000 0x100>; diff --git a/dts/src/arm/sama5d3.dtsi b/dts/src/arm/sama5d3.dtsi index 4c84d333fc..b06448ba66 100644 --- a/dts/src/arm/sama5d3.dtsi +++ b/dts/src/arm/sama5d3.dtsi @@ -549,8 +549,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB30 periph A */ - AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* PB31 periph A with pullup */ + <AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP + AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE>; }; }; diff --git a/dts/src/arm/sama5d4.dtsi b/dts/src/arm/sama5d4.dtsi index 65e725fb56..4f60c1b7b1 100644 --- a/dts/src/arm/sama5d4.dtsi +++ b/dts/src/arm/sama5d4.dtsi @@ -1314,30 +1314,11 @@ status = "disabled"; }; - sckc@fc068650 { - compatible = "atmel,at91sam9x5-sckc"; + clk32k: sckc@fc068650 { + compatible = "atmel,sama5d4-sckc"; reg = <0xfc068650 0x4>; - - slow_rc_osc: slow_rc_osc { - compatible = "atmel,at91sam9x5-clk-slow-rc-osc"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-accuracy = <250000000>; - atmel,startup-time-usec = <75>; - }; - - slow_osc: slow_osc { - compatible = "atmel,at91sam9x5-clk-slow-osc"; - #clock-cells = <0>; - clocks = <&slow_xtal>; - atmel,startup-time-usec = <1200000>; - }; - - clk32k: slowck { - compatible = "atmel,at91sam9x5-clk-slow"; - #clock-cells = <0>; - clocks = <&slow_rc_osc &slow_osc>; - }; + #clock-cells = <0>; + clocks = <&slow_xtal>; }; rtc@fc0686b0 { @@ -1461,8 +1442,8 @@ dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = - <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE>, /* conflicts with D14 and TDI */ - <AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>; /* conflicts with D15 and TDO */ + <AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* conflicts with D14 and TDI */ + AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* conflicts with D15 and TDO */ }; }; diff --git a/dts/src/arm/sh73a0.dtsi b/dts/src/arm/sh73a0.dtsi index 032fe2f14b..e1267590b5 100644 --- a/dts/src/arm/sh73a0.dtsi +++ b/dts/src/arm/sh73a0.dtsi @@ -8,8 +8,6 @@ * kind, whether express or implied. */ -/include/ "skeleton.dtsi" - #include <dt-bindings/clock/sh73a0-clock.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> @@ -17,6 +15,8 @@ / { compatible = "renesas,sh73a0"; interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; cpus { #address-cells = <1>; diff --git a/dts/src/arm/socfpga.dtsi b/dts/src/arm/socfpga.dtsi index 9f48141270..da68965913 100644 --- a/dts/src/arm/socfpga.dtsi +++ b/dts/src/arm/socfpga.dtsi @@ -686,6 +686,12 @@ arm,data-latency = <2 1 1>; prefetch-data = <1>; prefetch-instr = <1>; + arm,shared-override; + arm,double-linefill = <1>; + arm,double-linefill-incr = <0>; + arm,double-linefill-wrap = <1>; + arm,prefetch-drop = <0>; + arm,prefetch-offset = <7>; }; mmc: dwmmc0@ff704000 { @@ -700,11 +706,38 @@ status = "disabled"; }; + nand0: nand@ff900000 { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "denali,denali-nand-dt"; + reg = <0xff900000 0x100000>, + <0xffb80000 0x10000>; + reg-names = "nand_data", "denali_reg"; + interrupts = <0x0 0x90 0x4>; + dma-mask = <0xffffffff>; + clocks = <&nand_clk>; + status = "disabled"; + }; + ocram: sram@ffff0000 { compatible = "mmio-sram"; reg = <0xffff0000 0x10000>; }; + qspi: spi@ff705000 { + compatible = "cdns,qspi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xff705000 0x1000>, + <0xffa00000 0x1000>; + interrupts = <0 151 4>; + cdns,fifo-depth = <128>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x00000000>; + clocks = <&qspi_clk>; + status = "disabled"; + }; + rst: rstmgr@ffd05000 { #reset-cells = <1>; compatible = "altr,rst-mgr"; diff --git a/dts/src/arm/socfpga_arria10.dtsi b/dts/src/arm/socfpga_arria10.dtsi index f520cbff5e..551c636a4f 100644 --- a/dts/src/arm/socfpga_arria10.dtsi +++ b/dts/src/arm/socfpga_arria10.dtsi @@ -562,6 +562,21 @@ status = "disabled"; }; + spi1: spi@ffda5000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xffda5000 0x100>; + interrupts = <0 102 4>; + num-chipselect = <4>; + bus-num = <0>; + /*32bit_access;*/ + tx-dma-channel = <&pdma 16>; + rx-dma-channel = <&pdma 17>; + clocks = <&spi_m_clk>; + status = "disabled"; + }; + sdr: sdr@ffc25000 { compatible = "syscon"; reg = <0xffcfb100 0x80>; @@ -573,6 +588,9 @@ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; cache-unified; cache-level = <2>; + prefetch-data = <1>; + prefetch-instr = <1>; + arm,shared-override; }; mmc: dwmmc0@ff808000 { @@ -657,6 +675,20 @@ }; }; + qspi: spi@ff809000 { + compatible = "cdns,qspi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xff809000 0x100>, + <0xffa00000 0x100000>; + interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + cdns,fifo-depth = <128>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x00000000>; + clocks = <&qspi_clk>; + status = "disabled"; + }; + rst: rstmgr@ffd05000 { #reset-cells = <1>; compatible = "altr,rst-mgr"; diff --git a/dts/src/arm/socfpga_arria10_socdk.dtsi b/dts/src/arm/socfpga_arria10_socdk.dtsi index 8e3a4adc38..eb00ae37f3 100644 --- a/dts/src/arm/socfpga_arria10_socdk.dtsi +++ b/dts/src/arm/socfpga_arria10_socdk.dtsi @@ -36,6 +36,30 @@ reg = <0x0 0x40000000>; /* 1GB */ }; + a10leds { + compatible = "gpio-leds"; + + a10sr_led0 { + label = "a10sr-led0"; + gpios = <&a10sr_gpio 0 1>; + }; + + a10sr_led1 { + label = "a10sr-led1"; + gpios = <&a10sr_gpio 1 1>; + }; + + a10sr_led2 { + label = "a10sr-led2"; + gpios = <&a10sr_gpio 2 1>; + }; + + a10sr_led3 { + label = "a10sr-led3"; + gpios = <&a10sr_gpio 3 1>; + }; + }; + soc { clkmgr@ffd04000 { clocks { @@ -75,6 +99,31 @@ status = "okay"; }; +&gpio1 { + status = "okay"; +}; + +&spi1 { + status = "okay"; + + resource-manager@0 { + compatible = "altr,a10sr"; + reg = <0>; + spi-max-frequency = <100000>; + /* low-level active IRQ at GPIO1_5 */ + interrupt-parent = <&portb>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + a10sr_gpio: gpio-controller { + compatible = "altr,a10sr-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; +}; + &i2c1 { speed-mode = <0>; status = "okay"; diff --git a/dts/src/arm/socfpga_arria10_socdk_qspi.dts b/dts/src/arm/socfpga_arria10_socdk_qspi.dts new file mode 100644 index 0000000000..beb2fc6b9e --- /dev/null +++ b/dts/src/arm/socfpga_arria10_socdk_qspi.dts @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2016 Intel. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +/dts-v1/; +#include "socfpga_arria10_socdk.dtsi" + +&qspi { + status = "okay"; + + flash0: n25q00@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00aa"; + reg = <0>; + spi-max-frequency = <100000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partition@qspi-boot { + label = "Boot and fpga data"; + reg = <0x0 0x2720000>; + }; + + partition@qspi-rootfs { + label = "Root Filesystem - JFFS2"; + reg = <0x2720000 0x58E0000>; + }; + }; +}; diff --git a/dts/src/arm/socfpga_arria5_socdk.dts b/dts/src/arm/socfpga_arria5_socdk.dts index 3c8867862b..f739ead074 100644 --- a/dts/src/arm/socfpga_arria5_socdk.dts +++ b/dts/src/arm/socfpga_arria5_socdk.dts @@ -82,6 +82,39 @@ status = "okay"; }; +&qspi { + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q256a"; + reg = <0>; + spi-max-frequency = <100000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partition@qspi-boot { + /* 8MB for raw data. */ + label = "Flash 0 Raw Data"; + reg = <0x0 0x800000>; + }; + + partition@qspi-rootfs { + /* 120MB for jffs2 data. */ + label = "Flash 0 jffs2 Filesystem"; + reg = <0x800000 0x7800000>; + }; + }; +}; + &usb1 { status = "okay"; }; diff --git a/dts/src/arm/socfpga_cyclone5_de0_sockit.dts b/dts/src/arm/socfpga_cyclone5_de0_sockit.dts index afea3645ad..5ecd2ef405 100644 --- a/dts/src/arm/socfpga_cyclone5_de0_sockit.dts +++ b/dts/src/arm/socfpga_cyclone5_de0_sockit.dts @@ -18,7 +18,7 @@ / { model = "Terasic DE-0(Atlas)"; - compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + compatible = "terasic,de0-atlas", "altr,socfpga-cyclone5", "altr,socfpga"; chosen { bootargs = "earlyprintk"; diff --git a/dts/src/arm/socfpga_cyclone5_mcv.dtsi b/dts/src/arm/socfpga_cyclone5_mcv.dtsi index f86f9c060d..6ad3b1eb9b 100644 --- a/dts/src/arm/socfpga_cyclone5_mcv.dtsi +++ b/dts/src/arm/socfpga_cyclone5_mcv.dtsi @@ -18,7 +18,7 @@ #include "socfpga_cyclone5.dtsi" / { - model = "DENX MCV"; + model = "Aries/DENX MCV"; compatible = "altr,socfpga-cyclone5", "altr,socfpga"; memory { diff --git a/dts/src/arm/socfpga_cyclone5_mcvevk.dts b/dts/src/arm/socfpga_cyclone5_mcvevk.dts index 7186a29b8b..e5a98e5696 100644 --- a/dts/src/arm/socfpga_cyclone5_mcvevk.dts +++ b/dts/src/arm/socfpga_cyclone5_mcvevk.dts @@ -18,8 +18,8 @@ #include "socfpga_cyclone5_mcv.dtsi" / { - model = "DENX MCV EVK"; - compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + model = "Aries/DENX MCV EVK"; + compatible = "denx,mcvevk", "altr,socfpga-cyclone5", "altr,socfpga"; aliases { ethernet0 = &gmac0; diff --git a/dts/src/arm/socfpga_cyclone5_socdk.dts b/dts/src/arm/socfpga_cyclone5_socdk.dts index 15e43f43f2..6306d008f0 100644 --- a/dts/src/arm/socfpga_cyclone5_socdk.dts +++ b/dts/src/arm/socfpga_cyclone5_socdk.dts @@ -19,7 +19,7 @@ / { model = "Altera SOCFPGA Cyclone V SoC Development Kit"; - compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + compatible = "altr,socfpga-cyclone5-socdk", "altr,socfpga-cyclone5", "altr,socfpga"; chosen { bootargs = "earlyprintk"; @@ -87,6 +87,39 @@ status = "okay"; }; +&qspi { + status = "okay"; + + flash0: n25q00@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00"; + reg = <0>; /* chip select */ + spi-max-frequency = <100000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partition@qspi-boot { + /* 8MB for raw data. */ + label = "Flash 0 Raw Data"; + reg = <0x0 0x800000>; + }; + + partition@qspi-rootfs { + /* 120MB for jffs2 data. */ + label = "Flash 0 jffs2 Filesystem"; + reg = <0x800000 0x7800000>; + }; + }; +}; + &usb1 { status = "okay"; }; diff --git a/dts/src/arm/socfpga_cyclone5_sockit.dts b/dts/src/arm/socfpga_cyclone5_sockit.dts index 02e22f554e..a0c90b3bdf 100644 --- a/dts/src/arm/socfpga_cyclone5_sockit.dts +++ b/dts/src/arm/socfpga_cyclone5_sockit.dts @@ -19,7 +19,7 @@ / { model = "Terasic SoCkit"; - compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + compatible = "terasic,socfpga-cyclone5-sockit", "altr,socfpga-cyclone5", "altr,socfpga"; chosen { bootargs = "earlyprintk"; @@ -175,6 +175,27 @@ status = "okay"; }; +&qspi { + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q00"; + reg = <0>; + spi-max-frequency = <100000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + }; +}; + &usb1 { status = "okay"; }; diff --git a/dts/src/arm/socfpga_cyclone5_socrates.dts b/dts/src/arm/socfpga_cyclone5_socrates.dts index d798537750..c3d52f27b2 100644 --- a/dts/src/arm/socfpga_cyclone5_socrates.dts +++ b/dts/src/arm/socfpga_cyclone5_socrates.dts @@ -80,3 +80,22 @@ &mmc { status = "okay"; }; + +&qspi { + status = "okay"; + + flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q256a"; + reg = <0>; + spi-max-frequency = <100000000>; + m25p,fast-read; + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + status = "okay"; + }; +}; diff --git a/dts/src/arm/socfpga_cyclone5_sodia.dts b/dts/src/arm/socfpga_cyclone5_sodia.dts new file mode 100644 index 0000000000..5b7e3c27e6 --- /dev/null +++ b/dts/src/arm/socfpga_cyclone5_sodia.dts @@ -0,0 +1,123 @@ +/* + * Copyright (C) 2016 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "socfpga_cyclone5.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Altera SOCFPGA Cyclone V SoC Macnica Sodia board"; + compatible = "macnica,sodia", "altr,socfpga-cyclone5", "altr,socfpga"; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + aliases { + ethernet0 = &gmac1; + }; + + regulator_3_3v: 3-3-v-regulator { + compatible = "regulator-fixed"; + regulator-name = "3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + leds: gpio-leds { + compatible = "gpio-leds"; + + hps_led0 { + label = "hps:green:led0"; + gpios = <&portb 12 GPIO_ACTIVE_LOW>; + }; + + hps_led1 { + label = "hps:green:led1"; + gpios = <&portb 13 GPIO_ACTIVE_LOW>; + }; + + hps_led2 { + label = "hps:green:led2"; + gpios = <&portb 14 GPIO_ACTIVE_LOW>; + }; + + hps_led3 { + label = "hps:green:led3"; + gpios = <&portb 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gmac1 { + status = "okay"; + phy-mode = "rgmii"; + phy = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <0>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&mmc0 { + cd-gpios = <&portb 18 0>; + vmmc-supply = <®ulator_3_3v>; + vqmmc-supply = <®ulator_3_3v>; + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/dts/src/arm/socfpga_cyclone5_vining_fpga.dts b/dts/src/arm/socfpga_cyclone5_vining_fpga.dts index b844473601..363ee62457 100644 --- a/dts/src/arm/socfpga_cyclone5_vining_fpga.dts +++ b/dts/src/arm/socfpga_cyclone5_vining_fpga.dts @@ -51,7 +51,7 @@ / { model = "samtec VIN|ING FPGA"; - compatible = "altr,socfpga-cyclone5", "altr,socfpga"; + compatible = "samtec,vining", "altr,socfpga-cyclone5", "altr,socfpga"; chosen { bootargs = "console=ttyS0,115200"; diff --git a/dts/src/arm/spear13xx.dtsi b/dts/src/arm/spear13xx.dtsi index 449acf0d82..17ea0abcdb 100644 --- a/dts/src/arm/spear13xx.dtsi +++ b/dts/src/arm/spear13xx.dtsi @@ -118,6 +118,7 @@ block_size = <0xfff>; dma-masters = <2>; data-width = <8 8>; + multi-block = <1 1 1 1 1 1 1 1>; }; dma@eb000000 { @@ -134,6 +135,7 @@ chan_priority = <1>; block_size = <0xfff>; data-width = <8 8>; + multi-block = <1 1 1 1 1 1 1 1>; }; fsmc: flash@b0000000 { diff --git a/dts/src/arm/stih407-clock.dtsi b/dts/src/arm/stih407-clock.dtsi index 13029c03d7..34c119a66f 100644 --- a/dts/src/arm/stih407-clock.dtsi +++ b/dts/src/arm/stih407-clock.dtsi @@ -101,6 +101,7 @@ clocks = <&clk_sysin>; clock-output-names = "clk-s-a0-pll-ofd-0"; + clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */ }; clk_s_a0_flexgen: clk-s-a0-flexgen { @@ -112,6 +113,7 @@ <&clk_sysin>; clock-output-names = "clk-ic-lmi0"; + clock-critical = <CLK_IC_LMI0>; }; }; @@ -126,6 +128,7 @@ "clk-s-c0-fs0-ch1", "clk-s-c0-fs0-ch2", "clk-s-c0-fs0-ch3"; + clock-critical = <0>; /* clk-s-c0-fs0-ch0 */ }; clk_s_c0: clockgen-c@09103000 { @@ -139,6 +142,7 @@ clocks = <&clk_sysin>; clock-output-names = "clk-s-c0-pll0-odf-0"; + clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */ }; clk_s_c0_pll1: clk-s-c0-pll1 { @@ -194,6 +198,12 @@ "clk-main-disp", "clk-aux-disp", "clk-compo-dvp"; + clock-critical = <CLK_PROC_STFE>, + <CLK_ICN_CPU>, + <CLK_TX_ICN_DMU>, + <CLK_EXT2F_A9>, + <CLK_ICN_LMI>, + <CLK_ICN_SBC>; }; }; diff --git a/dts/src/arm/stih407-family.dtsi b/dts/src/arm/stih407-family.dtsi index 8f79b4147b..c8b2944e30 100644 --- a/dts/src/arm/stih407-family.dtsi +++ b/dts/src/arm/stih407-family.dtsi @@ -916,7 +916,7 @@ }; sti_uni_player0: sti-uni-player@8d80000 { - compatible = "st,sti-uni-player"; + compatible = "st,stih407-uni-player-hdmi"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_PCM_0>; @@ -926,17 +926,13 @@ reg = <0x8d80000 0x158>; interrupts = <GIC_SPI 84 IRQ_TYPE_NONE>; dmas = <&fdma0 2 0 1>; - dai-name = "Uni Player #0 (HDMI)"; dma-names = "tx"; - st,uniperiph-id = <0>; - st,version = <5>; - st,mode = "HDMI"; status = "disabled"; }; sti_uni_player1: sti-uni-player@8d81000 { - compatible = "st,sti-uni-player"; + compatible = "st,stih407-uni-player-pcm-out"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_PCM_1>; @@ -946,17 +942,13 @@ reg = <0x8d81000 0x158>; interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>; dmas = <&fdma0 3 0 1>; - dai-name = "Uni Player #1 (PIO)"; dma-names = "tx"; - st,uniperiph-id = <1>; - st,version = <5>; - st,mode = "PCM"; status = "disabled"; }; sti_uni_player2: sti-uni-player@8d82000 { - compatible = "st,sti-uni-player"; + compatible = "st,stih407-uni-player-dac"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_PCM_2>; @@ -966,17 +958,13 @@ reg = <0x8d82000 0x158>; interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>; dmas = <&fdma0 4 0 1>; - dai-name = "Uni Player #1 (DAC)"; dma-names = "tx"; - st,uniperiph-id = <2>; - st,version = <5>; - st,mode = "PCM"; status = "disabled"; }; sti_uni_player3: sti-uni-player@8d85000 { - compatible = "st,sti-uni-player"; + compatible = "st,stih407-uni-player-spdif"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; clocks = <&clk_s_d0_flexgen CLK_SPDIFF>; @@ -987,38 +975,30 @@ interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>; dmas = <&fdma0 7 0 1>; dma-names = "tx"; - dai-name = "Uni Player #1 (PIO)"; - st,uniperiph-id = <3>; - st,version = <5>; - st,mode = "SPDIF"; status = "disabled"; }; sti_uni_reader0: sti-uni-reader@8d83000 { - compatible = "st,sti-uni-reader"; + compatible = "st,stih407-uni-reader-pcm_in"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; reg = <0x8d83000 0x158>; interrupts = <GIC_SPI 87 IRQ_TYPE_NONE>; dmas = <&fdma0 5 0 1>; dma-names = "rx"; - dai-name = "Uni Reader #0 (PCM IN)"; - st,version = <3>; status = "disabled"; }; sti_uni_reader1: sti-uni-reader@8d84000 { - compatible = "st,sti-uni-reader"; + compatible = "st,stih407-uni-reader-hdmi"; #sound-dai-cells = <0>; st,syscfg = <&syscfg_core>; reg = <0x8d84000 0x158>; interrupts = <GIC_SPI 88 IRQ_TYPE_NONE>; dmas = <&fdma0 6 0 1>; dma-names = "rx"; - dai-name = "Uni Reader #1 (HDMI RX)"; - st,version = <3>; status = "disabled"; }; diff --git a/dts/src/arm/stih407-pinctrl.dtsi b/dts/src/arm/stih407-pinctrl.dtsi index c325cc059a..daab16b5ae 100644 --- a/dts/src/arm/stih407-pinctrl.dtsi +++ b/dts/src/arm/stih407-pinctrl.dtsi @@ -1157,7 +1157,7 @@ reg = <0x0923f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0x09230000 0x3000>; pio40: gpio@09230000 { diff --git a/dts/src/arm/stih407.dtsi b/dts/src/arm/stih407.dtsi index 291ffacbd2..fa149837df 100644 --- a/dts/src/arm/stih407.dtsi +++ b/dts/src/arm/stih407.dtsi @@ -102,7 +102,7 @@ <&clk_s_d2_quadfs 0>; }; - sti-hdmi@8d04000 { + sti_hdmi: sti-hdmi@8d04000 { compatible = "st,stih407-hdmi"; reg = <0x8d04000 0x1000>; reg-names = "hdmi-reg"; diff --git a/dts/src/arm/stih410-b2260.dts b/dts/src/arm/stih410-b2260.dts index 7fb507fcba..06b0696cb6 100644 --- a/dts/src/arm/stih410-b2260.dts +++ b/dts/src/arm/stih410-b2260.dts @@ -165,6 +165,9 @@ status = "okay"; }; + sti_uni_player0: sti-uni-player@8d80000 { + status = "okay"; + }; /* SSC11 to HDMI */ hdmiddc: i2c@9541000 { /* HDMI V1.3a supports Standard mode only */ @@ -174,9 +177,22 @@ status = "okay"; }; - sti-display-subsystem { - sti_hdmi: sti-hdmi@8d04000 { - status = "okay"; + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "STI-B2260"; + status = "okay"; + + simple-audio-card,dai-link@0 { + /* DAC */ + format = "i2s"; + mclk-fs = <128>; + cpu { + sound-dai = <&sti_uni_player0>; + }; + + codec { + sound-dai = <&sti_hdmi>; + }; }; }; diff --git a/dts/src/arm/stih410-clock.dtsi b/dts/src/arm/stih410-clock.dtsi index 8598effd6c..07c8ef9d77 100644 --- a/dts/src/arm/stih410-clock.dtsi +++ b/dts/src/arm/stih410-clock.dtsi @@ -208,7 +208,8 @@ "clk-clust-hades", "clk-hwpe-hades", "clk-fc-hades"; - clock-critical = <CLK_ICN_CPU>, + clock-critical = <CLK_PROC_STFE>, + <CLK_ICN_CPU>, <CLK_TX_ICN_DMU>, <CLK_EXT2F_A9>, <CLK_ICN_LMI>, diff --git a/dts/src/arm/stih410.dtsi b/dts/src/arm/stih410.dtsi index a3ef7341c0..281a12424c 100644 --- a/dts/src/arm/stih410.dtsi +++ b/dts/src/arm/stih410.dtsi @@ -193,7 +193,7 @@ <&clk_s_d2_quadfs 0>; }; - sti-hdmi@8d04000 { + sti_hdmi: sti-hdmi@8d04000 { compatible = "st,stih407-hdmi"; reg = <0x8d04000 0x1000>; reg-names = "hdmi-reg"; diff --git a/dts/src/arm/stih415-b2000.dts b/dts/src/arm/stih415-b2000.dts deleted file mode 100644 index bdfbd3765d..0000000000 --- a/dts/src/arm/stih415-b2000.dts +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -/dts-v1/; -#include "stih415.dtsi" -#include "stih41x-b2000.dtsi" -/ { - model = "STiH415 B2000 Board"; - compatible = "st,stih415-b2000", "st,stih415"; -}; diff --git a/dts/src/arm/stih415-b2020.dts b/dts/src/arm/stih415-b2020.dts deleted file mode 100644 index 71903a87bd..0000000000 --- a/dts/src/arm/stih415-b2020.dts +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -/dts-v1/; -#include "stih415.dtsi" -#include "stih41x-b2020.dtsi" -/ { - model = "STiH415 B2020 Board"; - compatible = "st,stih415-b2020", "st,stih415"; -}; diff --git a/dts/src/arm/stih415-clock.dtsi b/dts/src/arm/stih415-clock.dtsi deleted file mode 100644 index 3ee34514bc..0000000000 --- a/dts/src/arm/stih415-clock.dtsi +++ /dev/null @@ -1,533 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <dt-bindings/clock/stih415-clks.h> - -/ { - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * Fixed 30MHz oscillator input to SoC - */ - clk_sysin: clk-sysin { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <30000000>; - }; - - /* - * ClockGenAs on SASG1 - */ - clockgen-a@fee62000 { - reg = <0xfee62000 0xb48>; - - clk_s_a0_pll: clk-s-a0-pll { - #clock-cells = <1>; - compatible = "st,clkgena-plls-c65"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-s-a0-pll0-hs", - "clk-s-a0-pll0-ls", - "clk-s-a0-pll1"; - }; - - clk_s_a0_osc_prediv: clk-s-a0-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c65", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-s-a0-osc-prediv"; - }; - - clk_s_a0_hs: clk-s-a0-hs { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c65-hs", - "st,clkgena-divmux"; - - clocks = <&clk_s_a0_osc_prediv>, - <&clk_s_a0_pll 0>, /* PLL0 HS */ - <&clk_s_a0_pll 2>; /* PLL1 */ - - clock-output-names = "clk-s-fdma-0", - "clk-s-fdma-1", - ""; /* clk-s-jit-sense */ - /* Fourth output unused */ - }; - - clk_s_a0_ls: clk-s-a0-ls { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c65-ls", - "st,clkgena-divmux"; - - clocks = <&clk_s_a0_osc_prediv>, - <&clk_s_a0_pll 1>, /* PLL0 LS */ - <&clk_s_a0_pll 2>; /* PLL1 */ - - clock-output-names = "clk-s-icn-reg-0", - "clk-s-icn-if-0", - "clk-s-icn-reg-lp-0", - "clk-s-emiss", - "clk-s-eth1-phy", - "clk-s-mii-ref-out"; - /* Remaining outputs unused */ - }; - }; - - clockgen-a@fee81000 { - reg = <0xfee81000 0xb48>; - - clk_s_a1_pll: clk-s-a1-pll { - #clock-cells = <1>; - compatible = "st,clkgena-plls-c65"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-s-a1-pll0-hs", - "clk-s-a1-pll0-ls", - "clk-s-a1-pll1"; - }; - - clk_s_a1_osc_prediv: clk-s-a1-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c65", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-s-a1-osc-prediv"; - }; - - clk_s_a1_hs: clk-s-a1-hs { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c65-hs", - "st,clkgena-divmux"; - - clocks = <&clk_s_a1_osc_prediv>, - <&clk_s_a1_pll 0>, /* PLL0 HS */ - <&clk_s_a1_pll 2>; /* PLL1 */ - - clock-output-names = "", /* Reserved */ - "", /* Reserved */ - "clk-s-stac-phy", - "clk-s-vtac-tx-phy"; - }; - - clk_s_a1_ls: clk-s-a1-ls { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c65-ls", - "st,clkgena-divmux"; - - clocks = <&clk_s_a1_osc_prediv>, - <&clk_s_a1_pll 1>, /* PLL0 LS */ - <&clk_s_a1_pll 2>; /* PLL1 */ - - clock-output-names = "clk-s-icn-if-2", - "clk-s-card-mmc", - "clk-s-icn-if-1", - "clk-s-gmac0-phy", - "clk-s-nand-ctrl", - "", /* Reserved */ - "clk-s-mii0-ref-out", - ""; /* clk-s-stac-sys */ - /* Remaining outputs unused */ - }; - }; - - /* - * ClockGenAs on MPE41 - */ - clockgen-a@fde12000 { - reg = <0xfde12000 0xb50>; - - clk_m_a0_pll0: clk-m-a0-pll0 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a0-pll0-phi0", - "clk-m-a0-pll0-phi1", - "clk-m-a0-pll0-phi2", - "clk-m-a0-pll0-phi3"; - }; - - clk_m_a0_pll1: clk-m-a0-pll1 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a0-pll1-phi0", - "clk-m-a0-pll1-phi1", - "clk-m-a0-pll1-phi2", - "clk-m-a0-pll1-phi3"; - }; - - clk_m_a0_osc_prediv: clk-m-a0-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c32", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a0-osc-prediv"; - }; - - clk_m_a0_div0: clk-m-a0-div0 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf0", - "st,clkgena-divmux"; - - clocks = <&clk_m_a0_osc_prediv>, - <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */ - <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */ - - clock-output-names = "clk-m-apb-pm", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "clk-m-pp-dmu-0", - "clk-m-pp-dmu-1", - "clk-m-icm-disp", - ""; /* Unused */ - }; - - clk_m_a0_div1: clk-m-a0-div1 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf1", - "st,clkgena-divmux"; - - clocks = <&clk_m_a0_osc_prediv>, - <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */ - <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */ - - clock-output-names = "", /* Unused */ - "", /* Unused */ - "clk-m-a9-ext2f", - "clk-m-st40rt", - "clk-m-st231-dmu-0", - "clk-m-st231-dmu-1", - "clk-m-st231-aud", - "clk-m-st231-gp-0"; - }; - - clk_m_a0_div2: clk-m-a0-div2 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf2", - "st,clkgena-divmux"; - - clocks = <&clk_m_a0_osc_prediv>, - <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */ - <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */ - - clock-output-names = "clk-m-st231-gp-1", - "clk-m-icn-cpu", - "clk-m-icn-stac", - "clk-m-icn-dmu-0", - "clk-m-icn-dmu-1", - "", /* Unused */ - "", /* Unused */ - ""; /* Unused */ - }; - - clk_m_a0_div3: clk-m-a0-div3 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf3", - "st,clkgena-divmux"; - - clocks = <&clk_m_a0_osc_prediv>, - <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */ - <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */ - - clock-output-names = "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "clk-m-icn-eram", - "clk-m-a9-trace"; - }; - }; - - clockgen-a@fd6db000 { - reg = <0xfd6db000 0xb50>; - - clk_m_a1_pll0: clk-m-a1-pll0 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a1-pll0-phi0", - "clk-m-a1-pll0-phi1", - "clk-m-a1-pll0-phi2", - "clk-m-a1-pll0-phi3"; - }; - - clk_m_a1_pll1: clk-m-a1-pll1 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a1-pll1-phi0", - "clk-m-a1-pll1-phi1", - "clk-m-a1-pll1-phi2", - "clk-m-a1-pll1-phi3"; - }; - - clk_m_a1_osc_prediv: clk-m-a1-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c32", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a1-osc-prediv"; - }; - - clk_m_a1_div0: clk-m-a1-div0 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf0", - "st,clkgena-divmux"; - - clocks = <&clk_m_a1_osc_prediv>, - <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */ - <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */ - - clock-output-names = "clk-m-fdma-12", - "clk-m-fdma-10", - "clk-m-fdma-11", - "clk-m-hva-lmi", - "clk-m-proc-sc", - "clk-m-tp", - "clk-m-icn-gpu", - "clk-m-icn-vdp-0"; - }; - - clk_m_a1_div1: clk-m-a1-div1 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf1", - "st,clkgena-divmux"; - - clocks = <&clk_m_a1_osc_prediv>, - <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */ - <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */ - - clock-output-names = "clk-m-icn-vdp-1", - "clk-m-icn-vdp-2", - "clk-m-icn-vdp-3", - "clk-m-prv-t1-bus", - "clk-m-icn-vdp-4", - "clk-m-icn-reg-10", - "", /* Unused */ - ""; /* clk-m-icn-st231 */ - }; - - clk_m_a1_div2: clk-m-a1-div2 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf2", - "st,clkgena-divmux"; - - clocks = <&clk_m_a1_osc_prediv>, - <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */ - <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */ - - clock-output-names = "clk-m-fvdp-proc-alt", - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - ""; /* Unused */ - }; - - clk_m_a1_div3: clk-m-a1-div3 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf3", - "st,clkgena-divmux"; - - clocks = <&clk_m_a1_osc_prediv>, - <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */ - <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */ - - clock-output-names = "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - ""; /* Unused */ - }; - }; - - clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&clk_m_a0_div1 2>; - clock-div = <2>; - clock-mult = <1>; - }; - - clockgen-a@fd345000 { - reg = <0xfd345000 0xb50>; - - clk_m_a2_pll0: clk-m-a2-pll0 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a2-pll0-phi0", - "clk-m-a2-pll0-phi1", - "clk-m-a2-pll0-phi2", - "clk-m-a2-pll0-phi3"; - }; - - clk_m_a2_pll1: clk-m-a2-pll1 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a2-pll1-phi0", - "clk-m-a2-pll1-phi1", - "clk-m-a2-pll1-phi2", - "clk-m-a2-pll1-phi3"; - }; - - clk_m_a2_osc_prediv: clk-m-a2-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c32", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a2-osc-prediv"; - }; - - clk_m_a2_div0: clk-m-a2-div0 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf0", - "st,clkgena-divmux"; - - clocks = <&clk_m_a2_osc_prediv>, - <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */ - <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */ - - clock-output-names = "clk-m-vtac-main-phy", - "clk-m-vtac-aux-phy", - "clk-m-stac-phy", - "clk-m-stac-sys", - "", /* clk-m-mpestac-pg */ - "", /* clk-m-mpestac-wc */ - "", /* clk-m-mpevtacaux-pg*/ - ""; /* clk-m-mpevtacmain-pg*/ - }; - - clk_m_a2_div1: clk-m-a2-div1 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf1", - "st,clkgena-divmux"; - - clocks = <&clk_m_a2_osc_prediv>, - <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */ - <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */ - - clock-output-names = "", /* clk-m-mpevtacrx0-wc */ - "", /* clk-m-mpevtacrx1-wc */ - "clk-m-compo-main", - "clk-m-compo-aux", - "clk-m-bdisp-0", - "clk-m-bdisp-1", - "clk-m-icn-bdisp-0", - "clk-m-icn-bdisp-1"; - }; - - clk_m_a2_div2: clk-m-a2-div2 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf2", - "st,clkgena-divmux"; - - clocks = <&clk_m_a2_osc_prediv>, - <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */ - <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */ - - clock-output-names = "", /* clk-m-icn-hqvdp0 */ - "", /* clk-m-icn-hqvdp1 */ - "clk-m-icn-compo", - "", /* clk-m-icn-vdpaux */ - "clk-m-icn-ts", - "clk-m-icn-reg-lp-10", - "clk-m-dcephy-impctrl", - ""; /* Unused */ - }; - - clk_m_a2_div3: clk-m-a2-div3 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf3", - "st,clkgena-divmux"; - - clocks = <&clk_m_a2_osc_prediv>, - <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */ - <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */ - - clock-output-names = ""; /* Unused */ - /* Remaining outputs unused */ - }; - }; - - /* - * A9 PLL - */ - clockgen-a9@fdde00d8 { - reg = <0xfdde00d8 0x70>; - - clockgen_a9_pll: clockgen-a9-pll { - #clock-cells = <1>; - compatible = "st,stih415-plls-c32-a9", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - clock-output-names = "clockgen-a9-pll-odf"; - }; - }; - - /* - * ARM CPU related clocks - */ - clk_m_a9: clk-m-a9@fdde00d8 { - #clock-cells = <0>; - compatible = "st,stih415-clkgen-a9-mux", "st,clkgen-mux"; - reg = <0xfdde00d8 0x4>; - clocks = <&clockgen_a9_pll 0>, - <&clockgen_a9_pll 0>, - <&clk_m_a0_div1 2>, - <&clk_m_a9_ext2f_div2>; - }; - - /* - * ARM Peripheral clock for timers - */ - arm_periph_clk: clk-m-a9-periphs { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&clk_m_a9>; - clock-div = <2>; - clock-mult = <1>; - }; - }; -}; diff --git a/dts/src/arm/stih415-pinctrl.dtsi b/dts/src/arm/stih415-pinctrl.dtsi deleted file mode 100644 index bd028ce98b..0000000000 --- a/dts/src/arm/stih415-pinctrl.dtsi +++ /dev/null @@ -1,545 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -#include "st-pincfg.h" -#include <dt-bindings/interrupt-controller/arm-gic.h> -/ { - - aliases { - gpio0 = &pio0; - gpio1 = &pio1; - gpio2 = &pio2; - gpio3 = &pio3; - gpio4 = &pio4; - gpio5 = &pio5; - gpio6 = &pio6; - gpio7 = &pio7; - gpio8 = &pio8; - gpio9 = &pio9; - gpio10 = &pio10; - gpio11 = &pio11; - gpio12 = &pio12; - gpio13 = &pio13; - gpio14 = &pio14; - gpio15 = &pio15; - gpio16 = &pio16; - gpio17 = &pio17; - gpio18 = &pio18; - gpio19 = &pio100; - gpio20 = &pio101; - gpio21 = &pio102; - gpio22 = &pio103; - gpio23 = &pio104; - gpio24 = &pio105; - gpio25 = &pio106; - gpio26 = &pio107; - }; - - soc { - pin-controller-sbc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih415-sbc-pinctrl"; - st,syscfg = <&syscfg_sbc>; - reg = <0xfe61f080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfe610000 0x5000>; - - pio0: gpio@fe610000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO0"; - }; - pio1: gpio@fe611000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO1"; - }; - pio2: gpio@fe612000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO2"; - }; - pio3: gpio@fe613000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x100>; - st,bank-name = "PIO3"; - }; - pio4: gpio@fe614000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x100>; - st,bank-name = "PIO4"; - }; - - sbc_serial1 { - pinctrl_sbc_serial1:sbc_serial1 { - st,pins { - tx = <&pio2 6 ALT3 OUT>; - rx = <&pio2 7 ALT3 IN>; - }; - }; - }; - - keyscan { - pinctrl_keyscan: keyscan { - st,pins { - keyin0 = <&pio0 2 ALT2 IN>; - keyin1 = <&pio0 3 ALT2 IN>; - keyin2 = <&pio0 4 ALT2 IN>; - keyin3 = <&pio2 6 ALT2 IN>; - - keyout0 = <&pio1 6 ALT2 OUT>; - keyout1 = <&pio1 7 ALT2 OUT>; - keyout2 = <&pio0 6 ALT2 OUT>; - keyout3 = <&pio2 7 ALT2 OUT>; - }; - }; - }; - - sbc_i2c0 { - pinctrl_sbc_i2c0_default: sbc_i2c0-default { - st,pins { - sda = <&pio4 6 ALT1 BIDIR>; - scl = <&pio4 5 ALT1 BIDIR>; - }; - }; - }; - - sbc_i2c1 { - pinctrl_sbc_i2c1_default: sbc_i2c1-default { - st,pins { - sda = <&pio3 2 ALT2 BIDIR>; - scl = <&pio3 1 ALT2 BIDIR>; - }; - }; - }; - - rc{ - pinctrl_ir: ir0 { - st,pins { - ir = <&pio4 0 ALT2 IN>; - }; - }; - }; - - gmac1 { - pinctrl_mii1: mii1 { - st,pins { - txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; - col = <&pio0 7 ALT1 IN BYPASS 1000>; - mdio = <&pio1 0 ALT1 OUT BYPASS 0>; - mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; - crs = <&pio1 2 ALT1 IN BYPASS 1000>; - mdint = <&pio1 3 ALT1 IN BYPASS 0>; - rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&pio2 3 ALT1 IN NICLK 1000 CLK_A>; - }; - }; - - pinctrl_rgmii1: rgmii1-0 { - st,pins { - txd0 = <&pio0 0 ALT1 OUT DE_IO 1000 CLK_A>; - txd1 = <&pio0 1 ALT1 OUT DE_IO 1000 CLK_A>; - txd2 = <&pio0 2 ALT1 OUT DE_IO 1000 CLK_A>; - txd3 = <&pio0 3 ALT1 OUT DE_IO 1000 CLK_A>; - txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>; - txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; - mdio = <&pio1 0 ALT1 OUT BYPASS 0>; - mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; - rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>; - rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>; - rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>; - rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>; - - rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>; - rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>; - - clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>; - }; - }; - }; - }; - - pin-controller-front { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih415-front-pinctrl"; - st,syscfg = <&syscfg_front>; - reg = <0xfee0f080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfee00000 0x8000>; - - pio5: gpio@fee00000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO5"; - }; - pio6: gpio@fee01000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO6"; - }; - pio7: gpio@fee02000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO7"; - }; - pio8: gpio@fee03000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x100>; - st,bank-name = "PIO8"; - }; - pio9: gpio@fee04000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x100>; - st,bank-name = "PIO9"; - }; - pio10: gpio@fee05000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000 0x100>; - st,bank-name = "PIO10"; - }; - pio11: gpio@fee06000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x6000 0x100>; - st,bank-name = "PIO11"; - }; - pio12: gpio@fee07000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x7000 0x100>; - st,bank-name = "PIO12"; - }; - - i2c0 { - pinctrl_i2c0_default: i2c0-default { - st,pins { - sda = <&pio9 3 ALT1 BIDIR>; - scl = <&pio9 2 ALT1 BIDIR>; - }; - }; - }; - - i2c1 { - pinctrl_i2c1_default: i2c1-default { - st,pins { - sda = <&pio12 1 ALT1 BIDIR>; - scl = <&pio12 0 ALT1 BIDIR>; - }; - }; - }; - }; - - pin-controller-rear { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih415-rear-pinctrl"; - st,syscfg = <&syscfg_rear>; - reg = <0xfe82f080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfe820000 0x8000>; - - pio13: gpio@fe820000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO13"; - }; - pio14: gpio@fe821000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO14"; - }; - pio15: gpio@fe822000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO15"; - }; - pio16: gpio@fe823000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x100>; - st,bank-name = "PIO16"; - }; - pio17: gpio@fe824000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x100>; - st,bank-name = "PIO17"; - }; - pio18: gpio@fe825000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000 0x100>; - st,bank-name = "PIO18"; - }; - - serial2 { - pinctrl_serial2: serial2-0 { - st,pins { - tx = <&pio17 4 ALT2 OUT>; - rx = <&pio17 5 ALT2 IN>; - }; - }; - }; - - gmac0{ - pinctrl_mii0: mii0 { - st,pins { - mdint = <&pio13 6 ALT2 IN BYPASS 0>; - txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - - txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; - txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; - - txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; - txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - crs = <&pio15 2 ALT2 IN BYPASS 1000>; - col = <&pio15 3 ALT2 IN BYPASS 1000>; - mdio = <&pio15 4 ALT2 OUT BYPASS 3000>; - mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; - - rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>; - phyclk = <&pio13 5 ALT2 OUT NICLK 1000 CLK_A>; - - }; - }; - - pinctrl_gmii0: gmii0 { - st,pins { - mdint = <&pio13 6 ALT2 IN BYPASS 0>; - mdio = <&pio15 4 ALT2 OUT BYPASS 3000>; - mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; - txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; - - txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; - txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; - txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd4 = <&pio14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd5 = <&pio14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd6 = <&pio14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - txd7 = <&pio14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>; - - txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; - txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>; - crs = <&pio15 2 ALT2 IN BYPASS 1000>; - col = <&pio15 3 ALT2 IN BYPASS 1000>; - rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - - rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd4 = <&pio16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd5 = <&pio16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd6 = <&pio16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - rxd7 = <&pio16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>; - - rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>; - clk125 = <&pio17 6 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>; - - - }; - }; - }; - - mmc0 { - pinctrl_mmc0: mmc0 { - st,pins { - mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>; - data0 = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>; - data1 = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>; - data2 = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>; - data3 = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>; - cmd = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>; - wp = <&pio15 3 ALT4 IN>; - data4 = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>; - data5 = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>; - data6 = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>; - data7 = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>; - pwr = <&pio17 1 ALT4 OUT>; - cd = <&pio17 2 ALT4 IN>; - led = <&pio17 3 ALT4 OUT>; - }; - }; - }; - }; - - pin-controller-left { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih415-left-pinctrl"; - st,syscfg = <&syscfg_left>; - reg = <0xfd6bf080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfd6b0000 0x3000>; - - pio100: gpio@fd6b0000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO100"; - }; - pio101: gpio@fd6b1000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO101"; - }; - pio102: gpio@fd6b2000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO102"; - }; - }; - - pin-controller-right { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih415-right-pinctrl"; - st,syscfg = <&syscfg_right>; - reg = <0xfd33f080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfd330000 0x5000>; - - pio103: gpio@fd330000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO103"; - }; - pio104: gpio@fd331000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO104"; - }; - pio105: gpio@fd332000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO105"; - }; - pio106: gpio@fd333000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x100>; - st,bank-name = "PIO106"; - }; - pio107: gpio@fd334000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x100>; - st,bank-name = "PIO107"; - }; - }; - }; -}; diff --git a/dts/src/arm/stih415.dtsi b/dts/src/arm/stih415.dtsi deleted file mode 100644 index 12427e651e..0000000000 --- a/dts/src/arm/stih415.dtsi +++ /dev/null @@ -1,234 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -#include "stih41x.dtsi" -#include "stih415-clock.dtsi" -#include "stih415-pinctrl.dtsi" -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/reset/stih415-resets.h> -/ { - - L2: cache-controller { - compatible = "arm,pl310-cache"; - reg = <0xfffe2000 0x1000>; - arm,data-latency = <3 2 2>; - arm,tag-latency = <1 1 1>; - cache-unified; - cache-level = <2>; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - ranges; - compatible = "simple-bus"; - - powerdown: powerdown-controller { - #reset-cells = <1>; - compatible = "st,stih415-powerdown"; - }; - - softreset: softreset-controller { - #reset-cells = <1>; - compatible = "st,stih415-softreset"; - }; - - syscfg_sbc: sbc-syscfg@fe600000{ - compatible = "st,stih415-sbc-syscfg", "syscon"; - reg = <0xfe600000 0xb4>; - }; - - syscfg_front: front-syscfg@fee10000{ - compatible = "st,stih415-front-syscfg", "syscon"; - reg = <0xfee10000 0x194>; - }; - - syscfg_rear: rear-syscfg@fe830000{ - compatible = "st,stih415-rear-syscfg", "syscon"; - reg = <0xfe830000 0x190>; - }; - - /* MPE syscfgs */ - syscfg_left: left-syscfg@fd690000{ - compatible = "st,stih415-left-syscfg", "syscon"; - reg = <0xfd690000 0x78>; - }; - - syscfg_right: right-syscfg@fd320000{ - compatible = "st,stih415-right-syscfg", "syscon"; - reg = <0xfd320000 0x180>; - }; - - syscfg_system: system-syscfg@fdde0000 { - compatible = "st,stih415-system-syscfg", "syscon"; - reg = <0xfdde0000 0x15c>; - }; - - syscfg_lpm: lpm-syscfg@fe4b5100{ - compatible = "st,stih415-lpm-syscfg", "syscon"; - reg = <0xfe4b5100 0x08>; - }; - - serial2: serial@fed32000 { - compatible = "st,asc"; - status = "disabled"; - reg = <0xfed32000 0x2c>; - interrupts = <0 197 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial2>; - clocks = <&clk_s_a0_ls CLK_ICN_REG>; - }; - - /* SBC comms block ASCs in SASG1 */ - sbc_serial1: serial@fe531000 { - compatible = "st,asc"; - status = "disabled"; - reg = <0xfe531000 0x2c>; - interrupts = <0 210 0>; - clocks = <&clk_sysin>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sbc_serial1>; - }; - - i2c@fed40000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0xfed40000 0x110>; - interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_s_a0_ls CLK_ICN_REG>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0_default>; - - status = "disabled"; - }; - - i2c@fed41000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0xfed41000 0x110>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_s_a0_ls CLK_ICN_REG>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_default>; - - status = "disabled"; - }; - - i2c@fe540000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0xfe540000 0x110>; - interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_sysin>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sbc_i2c0_default>; - - status = "disabled"; - }; - - i2c@fe541000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0xfe541000 0x110>; - interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_sysin>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sbc_i2c1_default>; - - status = "disabled"; - }; - - ethernet0: dwmac@fe810000 { - device_type = "network"; - compatible = "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610"; - status = "disabled"; - - reg = <0xfe810000 0x8000>; - reg-names = "stmmaceth"; - - interrupts = <0 147 0>, <0 148 0>, <0 149 0>; - interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; - resets = <&softreset STIH415_ETH0_SOFTRESET>; - reset-names = "stmmaceth"; - - snps,pbl = <32>; - snps,mixed-burst; - snps,force_sf_dma_mode; - - st,syscon = <&syscfg_rear 0x148>; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mii0>; - clock-names = "stmmaceth", "sti-ethclk"; - clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>; - }; - - ethernet1: dwmac@fef08000 { - device_type = "network"; - compatible = "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610"; - status = "disabled"; - reg = <0xfef08000 0x8000>; - reg-names = "stmmaceth"; - interrupts = <0 150 0>, <0 151 0>, <0 152 0>; - interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; - - snps,pbl = <32>; - snps,mixed-burst; - snps,force_sf_dma_mode; - - st,syscon = <&syscfg_sbc 0x74>; - - resets = <&softreset STIH415_ETH1_SOFTRESET>; - reset-names = "stmmaceth"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mii1>; - clock-names = "stmmaceth", "sti-ethclk"; - clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>; - }; - - rc: rc@fe518000 { - compatible = "st,comms-irb"; - reg = <0xfe518000 0x234>; - interrupts = <0 203 0>; - clocks = <&clk_sysin>; - rx-mode = "infrared"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ir>; - resets = <&softreset STIH415_IRB_SOFTRESET>; - }; - - keyscan: keyscan@fe4b0000 { - compatible = "st,sti-keyscan"; - status = "disabled"; - reg = <0xfe4b0000 0x2000>; - interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; - clocks = <&clk_sysin>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_keyscan>; - resets = <&powerdown STIH415_KEYSCAN_POWERDOWN>, - <&softreset STIH415_KEYSCAN_SOFTRESET>; - }; - - mmc0: sdhci@fe81e000 { - compatible = "st,sdhci"; - status = "disabled"; - reg = <0xfe81e000 0x1000>; - interrupts = <GIC_SPI 145 IRQ_TYPE_NONE>; - interrupt-names = "mmcirq"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc0>; - clock-names = "mmc"; - clocks = <&clk_s_a1_ls 1>; - }; - }; -}; diff --git a/dts/src/arm/stih416-b2000.dts b/dts/src/arm/stih416-b2000.dts deleted file mode 100644 index 488e80a5d6..0000000000 --- a/dts/src/arm/stih416-b2000.dts +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -/dts-v1/; -#include "stih416.dtsi" -#include "stih41x-b2000.dtsi" -/ { - model = "STiH416 B2000"; - compatible = "st,stih416-b2000", "st,stih416"; -}; diff --git a/dts/src/arm/stih416-b2020.dts b/dts/src/arm/stih416-b2020.dts deleted file mode 100644 index 200a818447..0000000000 --- a/dts/src/arm/stih416-b2020.dts +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -/dts-v1/; -#include "stih416.dtsi" -#include "stih41x-b2020.dtsi" -/ { - model = "STiH416 B2020"; - compatible = "st,stih416-b2020", "st,stih416"; - - soc { - mmc1: sdhci@fe81f000 { - status = "okay"; - bus-width = <8>; - non-removable; - }; - - miphy365x_phy: phy@fe382000 { - phy_port0: port@fe382000 { - st,sata-gen = <3>; - }; - - phy_port1: port@fe38a000 { - st,pcie-tx-pol-inv; - }; - }; - - sata0: sata@fe380000{ - status = "okay"; - }; - }; -}; diff --git a/dts/src/arm/stih416-b2020e.dts b/dts/src/arm/stih416-b2020e.dts deleted file mode 100644 index de320cd067..0000000000 --- a/dts/src/arm/stih416-b2020e.dts +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Copyright (C) 2014 STMicroelectronics (R&D) Limited. - * Author: Lee Jones <lee.jones@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -/dts-v1/; -#include "stih416.dtsi" -#include "stih41x-b2020.dtsi" -#include <dt-bindings/gpio/gpio.h> -/ { - model = "STiH416 B2020 REV-E"; - compatible = "st,stih416-b2020", "st,stih416"; - - soc { - leds { - compatible = "gpio-leds"; - red { - label = "Front Panel LED"; - gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - green { - gpios = <&pio1 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - ethernet1: dwmac@fef08000 { - snps,reset-gpio = <&pio0 7>; - }; - - mmc1: sdhci@fe81f000 { - status = "okay"; - bus-width = <8>; - non-removable; - }; - - miphy365x_phy: phy@fe382000 { - phy_port0: port@fe382000 { - st,sata-gen = <3>; - }; - - phy_port1: port@fe38a000 { - st,pcie-tx-pol-inv; - }; - }; - - sata0: sata@fe380000{ - status = "okay"; - }; - - /* SAS PWM Module */ - pwm0: pwm@fed10000 { - status = "okay"; - }; - - /* SBC PWM Module */ - pwm1: pwm@fe510000 { - status = "okay"; - }; - }; -}; diff --git a/dts/src/arm/stih416-clock.dtsi b/dts/src/arm/stih416-clock.dtsi deleted file mode 100644 index 5b4fb838cd..0000000000 --- a/dts/src/arm/stih416-clock.dtsi +++ /dev/null @@ -1,756 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics R&D Limited - * <stlinux-devel@stlinux.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <dt-bindings/clock/stih416-clks.h> - -/ { - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * Fixed 30MHz oscillator inputs to SoC - */ - clk_sysin: clk-sysin { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <30000000>; - }; - - /* - * ClockGenAs on SASG2 - */ - clockgen-a@fee62000 { - reg = <0xfee62000 0xb48>; - - clk_s_a0_pll: clk-s-a0-pll { - #clock-cells = <1>; - compatible = "st,clkgena-plls-c65"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-s-a0-pll0-hs", - "clk-s-a0-pll0-ls", - "clk-s-a0-pll1"; - }; - - clk_s_a0_osc_prediv: clk-s-a0-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c65", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-s-a0-osc-prediv"; - }; - - clk_s_a0_hs: clk-s-a0-hs { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c65-hs", - "st,clkgena-divmux"; - - clocks = <&clk_s_a0_osc_prediv>, - <&clk_s_a0_pll 0>, /* PLL0 HS */ - <&clk_s_a0_pll 2>; /* PLL1 */ - - clock-output-names = "clk-s-fdma-0", - "clk-s-fdma-1", - ""; /* clk-s-jit-sense */ - /* Fourth output unused */ - }; - - clk_s_a0_ls: clk-s-a0-ls { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c65-ls", - "st,clkgena-divmux"; - - clocks = <&clk_s_a0_osc_prediv>, - <&clk_s_a0_pll 1>, /* PLL0 LS */ - <&clk_s_a0_pll 2>; /* PLL1 */ - - clock-output-names = "clk-s-icn-reg-0", - "clk-s-icn-if-0", - "clk-s-icn-reg-lp-0", - "clk-s-emiss", - "clk-s-eth1-phy", - "clk-s-mii-ref-out"; - /* Remaining outputs unused */ - }; - }; - - clockgen-a@fee81000 { - reg = <0xfee81000 0xb48>; - - clk_s_a1_pll: clk-s-a1-pll { - #clock-cells = <1>; - compatible = "st,clkgena-plls-c65"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-s-a1-pll0-hs", - "clk-s-a1-pll0-ls", - "clk-s-a1-pll1"; - }; - - clk_s_a1_osc_prediv: clk-s-a1-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c65", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-s-a1-osc-prediv"; - }; - - clk_s_a1_hs: clk-s-a1-hs { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c65-hs", - "st,clkgena-divmux"; - - clocks = <&clk_s_a1_osc_prediv>, - <&clk_s_a1_pll 0>, /* PLL0 HS */ - <&clk_s_a1_pll 2>; /* PLL1 */ - - clock-output-names = "", /* Reserved */ - "", /* Reserved */ - "clk-s-stac-phy", - "clk-s-vtac-tx-phy"; - }; - - clk_s_a1_ls: clk-s-a1-ls { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c65-ls", - "st,clkgena-divmux"; - - clocks = <&clk_s_a1_osc_prediv>, - <&clk_s_a1_pll 1>, /* PLL0 LS */ - <&clk_s_a1_pll 2>; /* PLL1 */ - - clock-output-names = "clk-s-icn-if-2", - "clk-s-card-mmc-0", - "clk-s-icn-if-1", - "clk-s-gmac0-phy", - "clk-s-nand-ctrl", - "", /* Reserved */ - "clk-s-mii0-ref-out", - "clk-s-stac-sys", - "clk-s-card-mmc-1"; - /* Remaining outputs unused */ - }; - }; - - /* - * ClockGenAs on MPE42 - */ - clockgen-a@fde12000 { - reg = <0xfde12000 0xb50>; - - clk_m_a0_pll0: clk-m-a0-pll0 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a0-pll0-phi0", - "clk-m-a0-pll0-phi1", - "clk-m-a0-pll0-phi2", - "clk-m-a0-pll0-phi3"; - }; - - clk_m_a0_pll1: clk-m-a0-pll1 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a0-pll1-phi0", - "clk-m-a0-pll1-phi1", - "clk-m-a0-pll1-phi2", - "clk-m-a0-pll1-phi3"; - }; - - clk_m_a0_osc_prediv: clk-m-a0-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c32", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a0-osc-prediv"; - }; - - clk_m_a0_div0: clk-m-a0-div0 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf0", - "st,clkgena-divmux"; - - clocks = <&clk_m_a0_osc_prediv>, - <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */ - <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */ - - clock-output-names = "", /* Unused */ - "", /* Unused */ - "clk-m-fdma-12", - "", /* Unused */ - "clk-m-pp-dmu-0", - "clk-m-pp-dmu-1", - "clk-m-icm-lmi", - "clk-m-vid-dmu-0"; - }; - - clk_m_a0_div1: clk-m-a0-div1 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf1", - "st,clkgena-divmux"; - - clocks = <&clk_m_a0_osc_prediv>, - <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */ - <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */ - - clock-output-names = "clk-m-vid-dmu-1", - "", /* Unused */ - "clk-m-a9-ext2f", - "clk-m-st40rt", - "clk-m-st231-dmu-0", - "clk-m-st231-dmu-1", - "clk-m-st231-aud", - "clk-m-st231-gp-0"; - }; - - clk_m_a0_div2: clk-m-a0-div2 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf2", - "st,clkgena-divmux"; - - clocks = <&clk_m_a0_osc_prediv>, - <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */ - <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */ - - clock-output-names = "clk-m-st231-gp-1", - "clk-m-icn-cpu", - "clk-m-icn-stac", - "clk-m-tx-icn-dmu-0", - "clk-m-tx-icn-dmu-1", - "clk-m-tx-icn-ts", - "clk-m-icn-vdp-0", - "clk-m-icn-vdp-1"; - }; - - clk_m_a0_div3: clk-m-a0-div3 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf3", - "st,clkgena-divmux"; - - clocks = <&clk_m_a0_osc_prediv>, - <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */ - <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */ - - clock-output-names = "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "clk-m-icn-vp8", - "", /* Unused */ - "clk-m-icn-reg-11", - "clk-m-a9-trace"; - }; - }; - - clockgen-a@fd6db000 { - reg = <0xfd6db000 0xb50>; - - clk_m_a1_pll0: clk-m-a1-pll0 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a1-pll0-phi0", - "clk-m-a1-pll0-phi1", - "clk-m-a1-pll0-phi2", - "clk-m-a1-pll0-phi3"; - }; - - clk_m_a1_pll1: clk-m-a1-pll1 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a1-pll1-phi0", - "clk-m-a1-pll1-phi1", - "clk-m-a1-pll1-phi2", - "clk-m-a1-pll1-phi3"; - }; - - clk_m_a1_osc_prediv: clk-m-a1-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c32", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a1-osc-prediv"; - }; - - clk_m_a1_div0: clk-m-a1-div0 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf0", - "st,clkgena-divmux"; - - clocks = <&clk_m_a1_osc_prediv>, - <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */ - <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */ - - clock-output-names = "", /* Unused */ - "clk-m-fdma-10", - "clk-m-fdma-11", - "clk-m-hva-alt", - "clk-m-proc-sc", - "clk-m-tp", - "clk-m-rx-icn-dmu-0", - "clk-m-rx-icn-dmu-1"; - }; - - clk_m_a1_div1: clk-m-a1-div1 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf1", - "st,clkgena-divmux"; - - clocks = <&clk_m_a1_osc_prediv>, - <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */ - <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */ - - clock-output-names = "clk-m-rx-icn-ts", - "clk-m-rx-icn-vdp-0", - "", /* Unused */ - "clk-m-prv-t1-bus", - "clk-m-icn-reg-12", - "clk-m-icn-reg-10", - "", /* Unused */ - "clk-m-icn-st231"; - }; - - clk_m_a1_div2: clk-m-a1-div2 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf2", - "st,clkgena-divmux"; - - clocks = <&clk_m_a1_osc_prediv>, - <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */ - <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */ - - clock-output-names = "clk-m-fvdp-proc-alt", - "clk-m-icn-reg-13", - "clk-m-tx-icn-gpu", - "clk-m-rx-icn-gpu", - "", /* Unused */ - "", /* Unused */ - "", /* clk-m-apb-pm-12 */ - ""; /* Unused */ - }; - - clk_m_a1_div3: clk-m-a1-div3 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf3", - "st,clkgena-divmux"; - - clocks = <&clk_m_a1_osc_prediv>, - <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */ - <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */ - - clock-output-names = "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - "", /* Unused */ - ""; /* clk-m-gpu-alt */ - }; - }; - - clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&clk_m_a0_div1 2>; - clock-div = <2>; - clock-mult = <1>; - }; - - clockgen-a@fd345000 { - reg = <0xfd345000 0xb50>; - - clk_m_a2_pll0: clk-m-a2-pll0 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a2-pll0-phi0", - "clk-m-a2-pll0-phi1", - "clk-m-a2-pll0-phi2", - "clk-m-a2-pll0-phi3"; - }; - - clk_m_a2_pll1: clk-m-a2-pll1 { - #clock-cells = <1>; - compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a2-pll1-phi0", - "clk-m-a2-pll1-phi1", - "clk-m-a2-pll1-phi2", - "clk-m-a2-pll1-phi3"; - }; - - clk_m_a2_osc_prediv: clk-m-a2-osc-prediv { - #clock-cells = <0>; - compatible = "st,clkgena-prediv-c32", - "st,clkgena-prediv"; - - clocks = <&clk_sysin>; - - clock-output-names = "clk-m-a2-osc-prediv"; - }; - - clk_m_a2_div0: clk-m-a2-div0 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf0", - "st,clkgena-divmux"; - - clocks = <&clk_m_a2_osc_prediv>, - <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */ - <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */ - - clock-output-names = "clk-m-vtac-main-phy", - "clk-m-vtac-aux-phy", - "clk-m-stac-phy", - "clk-m-stac-sys", - "", /* clk-m-mpestac-pg */ - "", /* clk-m-mpestac-wc */ - "", /* clk-m-mpevtacaux-pg*/ - ""; /* clk-m-mpevtacmain-pg*/ - }; - - clk_m_a2_div1: clk-m-a2-div1 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf1", - "st,clkgena-divmux"; - - clocks = <&clk_m_a2_osc_prediv>, - <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */ - <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */ - - clock-output-names = "", /* clk-m-mpevtacrx0-wc */ - "", /* clk-m-mpevtacrx1-wc */ - "clk-m-compo-main", - "clk-m-compo-aux", - "clk-m-bdisp-0", - "clk-m-bdisp-1", - "clk-m-icn-bdisp", - "clk-m-icn-compo"; - }; - - clk_m_a2_div2: clk-m-a2-div2 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf2", - "st,clkgena-divmux"; - - clocks = <&clk_m_a2_osc_prediv>, - <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */ - <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */ - - clock-output-names = "clk-m-icn-vdp-2", - "", /* Unused */ - "clk-m-icn-reg-14", - "clk-m-mdtp", - "clk-m-jpegdec", - "", /* Unused */ - "clk-m-dcephy-impctrl", - ""; /* Unused */ - }; - - clk_m_a2_div3: clk-m-a2-div3 { - #clock-cells = <1>; - compatible = "st,clkgena-divmux-c32-odf3", - "st,clkgena-divmux"; - - clocks = <&clk_m_a2_osc_prediv>, - <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */ - <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */ - - clock-output-names = "", /* Unused */ - ""; /* clk-m-apb-pm-11 */ - /* Remaining outputs unused */ - }; - }; - - /* - * A9 PLL - */ - clockgen-a9@fdde08b0 { - reg = <0xfdde08b0 0x70>; - - clockgen_a9_pll: clockgen-a9-pll { - #clock-cells = <1>; - compatible = "st,stih416-plls-c32-a9", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - clock-output-names = "clockgen-a9-pll-odf"; - }; - }; - - /* - * ARM CPU related clocks - */ - clk_m_a9: clk-m-a9@fdde08ac { - #clock-cells = <0>; - compatible = "st,stih416-clkgen-a9-mux", "st,clkgen-mux"; - reg = <0xfdde08ac 0x4>; - clocks = <&clockgen_a9_pll 0>, - <&clockgen_a9_pll 0>, - <&clk_m_a0_div1 2>, - <&clk_m_a9_ext2f_div2>; - }; - - /* - * ARM Peripheral clock for timers - */ - arm_periph_clk: clk-m-a9-periphs { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clocks = <&clk_m_a9>; - clock-div = <2>; - clock-mult = <1>; - }; - - /* - * Frequency synthesizers on the SASG2 - */ - clockgen_b0: clockgen-b0@fee108b4 { - #clock-cells = <1>; - compatible = "st,stih416-quadfs216", "st,quadfs"; - reg = <0xfee108b4 0x44>; - - clocks = <&clk_sysin>; - clock-output-names = "clk-s-usb48", - "clk-s-dss", - "clk-s-stfe-frc-2", - "clk-s-thsens-scard"; - }; - - clockgen_b1: clockgen-b1@fe8308c4 { - #clock-cells = <1>; - compatible = "st,stih416-quadfs216", "st,quadfs"; - reg = <0xfe8308c4 0x44>; - - clocks = <&clk_sysin>; - clock-output-names = "clk-s-pcm-0", - "clk-s-pcm-1", - "clk-s-pcm-2", - "clk-s-pcm-3"; - }; - - clockgen_c: clockgen-c@fe8307d0 { - #clock-cells = <1>; - compatible = "st,stih416-quadfs432", "st,quadfs"; - reg = <0xfe8307d0 0x44>; - - clocks = <&clk_sysin>; - clock-output-names = "clk-s-c-fs0-ch0", - "clk-s-c-vcc-sd", - "clk-s-c-fs0-ch2"; - }; - - clk_s_vcc_hd: clk-s-vcc-hd@fe8308b8 { - #clock-cells = <0>; - compatible = "st,stih416-clkgenc-vcc-hd", "st,clkgen-mux"; - reg = <0xfe8308b8 0x4>; /* SYSCFG2558 */ - - clocks = <&clk_sysin>, - <&clockgen_c 0>; - }; - - /* - * Add a dummy clock for the HDMI PHY for the VCC input mux - */ - clk_s_tmds_fromphy: clk-s-tmds-fromphy { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - clockgen_c_vcc: clockgen-c-vcc@fe8308ac { - #clock-cells = <1>; - compatible = "st,stih416-clkgenc", "st,clkgen-vcc"; - reg = <0xfe8308ac 0xc>; /* SYSCFG2555,2556,2557 */ - - clocks = <&clk_s_vcc_hd>, - <&clockgen_c 1>, - <&clk_s_tmds_fromphy>, - <&clockgen_c 2>; - - clock-output-names = "clk-s-pix-hdmi", - "clk-s-pix-dvo", - "clk-s-out-dvo", - "clk-s-pix-hd", - "clk-s-hddac", - "clk-s-denc", - "clk-s-sddac", - "clk-s-pix-main", - "clk-s-pix-aux", - "clk-s-stfe-frc-0", - "clk-s-ref-mcru", - "clk-s-slave-mcru", - "clk-s-tmds-hdmi", - "clk-s-hdmi-reject-pll", - "clk-s-thsens"; - }; - - clockgen_d: clockgen-d@fee107e0 { - #clock-cells = <1>; - compatible = "st,stih416-quadfs216", "st,quadfs"; - reg = <0xfee107e0 0x44>; - - clocks = <&clk_sysin>; - clock-output-names = "clk-s-ccsc", - "clk-s-stfe-frc-1", - "clk-s-tsout-1", - "clk-s-mchi"; - }; - - /* - * Frequency synthesizers on the MPE42 - */ - clockgen_e: clockgen-e@fd3208bc { - #clock-cells = <1>; - compatible = "st,stih416-quadfs660-E", "st,quadfs"; - reg = <0xfd3208bc 0xb0>; - - clocks = <&clk_sysin>; - clock-output-names = "clk-m-pix-mdtp-0", - "clk-m-pix-mdtp-1", - "clk-m-pix-mdtp-2", - "clk-m-mpelpc"; - }; - - clockgen_f: clockgen-f@fd320878 { - #clock-cells = <1>; - compatible = "st,stih416-quadfs660-F", "st,quadfs"; - reg = <0xfd320878 0xf0>; - - clocks = <&clk_sysin>; - clock-output-names = "clk-m-main-vidfs", - "clk-m-hva-fs", - "clk-m-fvdp-vcpu", - "clk-m-fvdp-proc-fs"; - }; - - clk_m_fvdp_proc: clk-m-fvdp-proc@fd320910 { - #clock-cells = <0>; - compatible = "st,stih416-clkgenf-vcc-fvdp", "st,clkgen-mux"; - reg = <0xfd320910 0x4>; /* SYSCFG8580 */ - - clocks = <&clk_m_a1_div2 0>, - <&clockgen_f 3>; - }; - - clk_m_hva: clk-m-hva@fd690868 { - #clock-cells = <0>; - compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux"; - reg = <0xfd690868 0x4>; /* SYSCFG9538 */ - - clocks = <&clockgen_f 1>, - <&clk_m_a1_div0 3>; - }; - - clk_m_f_vcc_hd: clk-m-f-vcc-hd@fd32086c { - #clock-cells = <0>; - compatible = "st,stih416-clkgenf-vcc-hd", "st,clkgen-mux"; - reg = <0xfd32086c 0x4>; /* SYSCFG8539 */ - - clocks = <&clockgen_c_vcc 7>, - <&clockgen_f 0>; - }; - - clk_m_f_vcc_sd: clk-m-f-vcc-sd@fd32086c { - #clock-cells = <0>; - compatible = "st,stih416-clkgenf-vcc-sd", "st,clkgen-mux"; - reg = <0xfd32086c 0x4>; /* SYSCFG8539 */ - - clocks = <&clockgen_c_vcc 8>, - <&clockgen_f 1>; - }; - - /* - * Add a dummy clock for the HDMIRx external signal clock - */ - clk_m_pix_hdmirx_sas: clk-m-pix-hdmirx-sas { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - clockgen_f_vcc: clockgen-f-vcc@fd32086c { - #clock-cells = <1>; - compatible = "st,stih416-clkgenf", "st,clkgen-vcc"; - reg = <0xfd32086c 0xc>; /* SYSCFG8539,8540,8541 */ - - clocks = <&clk_m_f_vcc_hd>, - <&clk_m_f_vcc_sd>, - <&clockgen_f 0>, - <&clk_m_pix_hdmirx_sas>; - - clock-output-names = "clk-m-pix-main-pipe", - "clk-m-pix-aux-pipe", - "clk-m-pix-main-cru", - "clk-m-pix-aux-cru", - "clk-m-xfer-be-compo", - "clk-m-xfer-pip-compo", - "clk-m-xfer-aux-compo", - "clk-m-vsens", - "clk-m-pix-hdmirx-0", - "clk-m-pix-hdmirx-1"; - }; - - /* - * DDR PLL - */ - clockgen-ddr@0xfdde07d8 { - reg = <0xfdde07d8 0x110>; - - clockgen_ddr_pll: clockgen-ddr-pll { - #clock-cells = <1>; - compatible = "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32"; - - clocks = <&clk_sysin>; - clock-output-names = "clockgen-ddr0", - "clockgen-ddr1"; - }; - }; - - /* - * GPU PLL - */ - clockgen-gpu@fd68ff00 { - reg = <0xfd68ff00 0x910>; - - clockgen_gpu_pll: clockgen-gpu-pll { - #clock-cells = <1>; - compatible = "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32"; - - clocks = <&clk_sysin>; - clock-output-names = "clockgen-gpu-pll"; - }; - }; - }; -}; diff --git a/dts/src/arm/stih416-pinctrl.dtsi b/dts/src/arm/stih416-pinctrl.dtsi deleted file mode 100644 index 9c97f7e651..0000000000 --- a/dts/src/arm/stih416-pinctrl.dtsi +++ /dev/null @@ -1,692 +0,0 @@ - -/* - * Copyright (C) 2013 STMicroelectronics Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -#include "st-pincfg.h" -#include <dt-bindings/interrupt-controller/arm-gic.h> -/ { - - aliases { - gpio0 = &pio0; - gpio1 = &pio1; - gpio2 = &pio2; - gpio3 = &pio3; - gpio4 = &pio4; - gpio5 = &pio40; - gpio6 = &pio5; - gpio7 = &pio6; - gpio8 = &pio7; - gpio9 = &pio8; - gpio10 = &pio9; - gpio11 = &pio10; - gpio12 = &pio11; - gpio13 = &pio12; - gpio14 = &pio30; - gpio15 = &pio31; - gpio16 = &pio13; - gpio17 = &pio14; - gpio18 = &pio15; - gpio19 = &pio16; - gpio20 = &pio17; - gpio21 = &pio18; - gpio22 = &pio100; - gpio23 = &pio101; - gpio24 = &pio102; - gpio25 = &pio103; - gpio26 = &pio104; - gpio27 = &pio105; - gpio28 = &pio106; - gpio29 = &pio107; - }; - - soc { - pin-controller-sbc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih416-sbc-pinctrl"; - st,syscfg = <&syscfg_sbc>; - reg = <0xfe61f080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfe610000 0x6000>; - - pio0: gpio@fe610000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO0"; - }; - pio1: gpio@fe611000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO1"; - }; - pio2: gpio@fe612000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO2"; - }; - pio3: gpio@fe613000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x100>; - st,bank-name = "PIO3"; - }; - pio4: gpio@fe614000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x100>; - st,bank-name = "PIO4"; - }; - pio40: gpio@fe615000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000 0x100>; - st,bank-name = "PIO40"; - st,retime-pin-mask = <0x7f>; - }; - - rc{ - pinctrl_ir: ir0 { - st,pins { - ir = <&pio4 0 ALT2 IN>; - }; - }; - }; - sbc_serial1 { - pinctrl_sbc_serial1: sbc_serial1 { - st,pins { - tx = <&pio2 6 ALT3 OUT>; - rx = <&pio2 7 ALT3 IN>; - }; - }; - }; - - keyscan { - pinctrl_keyscan: keyscan { - st,pins { - keyin0 = <&pio0 2 ALT2 IN>; - keyin1 = <&pio0 3 ALT2 IN>; - keyin2 = <&pio0 4 ALT2 IN>; - keyin3 = <&pio2 6 ALT2 IN>; - - keyout0 = <&pio1 6 ALT2 OUT>; - keyout1 = <&pio1 7 ALT2 OUT>; - keyout2 = <&pio0 6 ALT2 OUT>; - keyout3 = <&pio2 7 ALT2 OUT>; - }; - }; - }; - - sbc_i2c0 { - pinctrl_sbc_i2c0_default: sbc_i2c0-default { - st,pins { - sda = <&pio4 6 ALT1 BIDIR>; - scl = <&pio4 5 ALT1 BIDIR>; - }; - }; - }; - - usb { - pinctrl_usb3: usb3 { - st,pins { - oc-detect = <&pio40 0 ALT1 IN>; - pwr-enable = <&pio40 1 ALT1 OUT>; - }; - }; - }; - - sbc_i2c1 { - pinctrl_sbc_i2c1_default: sbc_i2c1-default { - st,pins { - sda = <&pio3 2 ALT2 BIDIR>; - scl = <&pio3 1 ALT2 BIDIR>; - }; - }; - }; - - gmac1 { - pinctrl_mii1: mii1 { - st,pins { - txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; - txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; - col = <&pio0 7 ALT1 IN BYPASS 1000>; - - mdio = <&pio1 0 ALT1 OUT BYPASS 1500>; - mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; - crs = <&pio1 2 ALT1 IN BYPASS 1000>; - mdint = <&pio1 3 ALT1 IN BYPASS 0>; - rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; - - rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; - rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>; - }; - }; - pinctrl_rgmii1: rgmii1-0 { - st,pins { - txd0 = <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>; - txd1 = <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>; - txd2 = <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>; - txd3 = <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>; - txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>; - txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; - - mdio = <&pio1 0 ALT1 OUT BYPASS 0>; - mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; - rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>; - rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>; - rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>; - rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>; - - rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>; - rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; - phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>; - - clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>; - }; - }; - }; - - pwm1 { - pinctrl_pwm1_chan0_default: pwm1-0-default { - st,pins { - pwm-out = <&pio3 0 ALT1 OUT>; - pwm-capturein = <&pio3 2 ALT1 IN>; - - }; - }; - pinctrl_pwm1_chan1_default: pwm1-1-default { - st,pins { - pwm-out = <&pio4 4 ALT1 OUT>; - pwm-capturein = <&pio4 3 ALT1 IN>; - }; - }; - pinctrl_pwm1_chan2_default: pwm1-2-default { - st,pins { - pwm-out = <&pio4 6 ALT3 OUT>; - }; - }; - pinctrl_pwm1_chan3_default: pwm1-3-default { - st,pins { - pwm-out = <&pio4 7 ALT3 OUT>; - }; - }; - }; - }; - - pin-controller-front { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih416-front-pinctrl"; - st,syscfg = <&syscfg_front>; - reg = <0xfee0f080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfee00000 0x10000>; - - pio5: gpio@fee00000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO5"; - }; - pio6: gpio@fee01000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO6"; - }; - pio7: gpio@fee02000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO7"; - }; - pio8: gpio@fee03000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x100>; - st,bank-name = "PIO8"; - }; - pio9: gpio@fee04000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x100>; - st,bank-name = "PIO9"; - }; - pio10: gpio@fee05000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000 0x100>; - st,bank-name = "PIO10"; - }; - pio11: gpio@fee06000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x6000 0x100>; - st,bank-name = "PIO11"; - }; - pio12: gpio@fee07000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x7000 0x100>; - st,bank-name = "PIO12"; - }; - pio30: gpio@fee08000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x8000 0x100>; - st,bank-name = "PIO30"; - }; - pio31: gpio@fee09000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x9000 0x100>; - st,bank-name = "PIO31"; - }; - - pwm0 { - pinctrl_pwm0_chan0_default: pwm0-0-default { - st,pins { - pwm-out = <&pio9 7 ALT2 OUT>; - pwm-capturein = <&pio9 6 ALT2 IN>; - }; - }; - }; - - serial2-oe { - pinctrl_serial2_oe: serial2-1 { - st,pins { - output-enable = <&pio11 3 ALT2 OUT>; - }; - }; - }; - - i2c0 { - pinctrl_i2c0_default: i2c0-default { - st,pins { - sda = <&pio9 3 ALT1 BIDIR>; - scl = <&pio9 2 ALT1 BIDIR>; - }; - }; - }; - - usb { - pinctrl_usb0: usb0 { - st,pins { - oc-detect = <&pio9 4 ALT1 IN>; - pwr-enable = <&pio9 5 ALT1 OUT>; - }; - }; - }; - - - i2c1 { - pinctrl_i2c1_default: i2c1-default { - st,pins { - sda = <&pio12 1 ALT1 BIDIR>; - scl = <&pio12 0 ALT1 BIDIR>; - }; - }; - }; - - fsm { - pinctrl_fsm: fsm { - st,pins { - spi-fsm-clk = <&pio12 2 ALT1 OUT>; - spi-fsm-cs = <&pio12 3 ALT1 OUT>; - spi-fsm-mosi = <&pio12 4 ALT1 OUT>; - spi-fsm-miso = <&pio12 5 ALT1 IN>; - spi-fsm-hol = <&pio12 6 ALT1 OUT>; - spi-fsm-wp = <&pio12 7 ALT1 OUT>; - }; - }; - }; - }; - - pin-controller-rear { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih416-rear-pinctrl"; - st,syscfg = <&syscfg_rear>; - reg = <0xfe82f080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfe820000 0x6000>; - - pio13: gpio@fe820000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO13"; - }; - pio14: gpio@fe821000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO14"; - }; - pio15: gpio@fe822000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO15"; - }; - pio16: gpio@fe823000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x100>; - st,bank-name = "PIO16"; - }; - pio17: gpio@fe824000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x100>; - st,bank-name = "PIO17"; - }; - pio18: gpio@fe825000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x5000 0x100>; - st,bank-name = "PIO18"; - st,retime-pin-mask = <0xf>; - }; - - serial2 { - pinctrl_serial2: serial2-0 { - st,pins { - tx = <&pio17 4 ALT2 OUT>; - rx = <&pio17 5 ALT2 IN>; - }; - }; - }; - - gmac0 { - pinctrl_mii0: mii0 { - st,pins { - mdint = <&pio13 6 ALT2 IN BYPASS 0>; - txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>; - txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>; - - txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; - txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>; - crs = <&pio15 2 ALT2 IN BYPASS 1000>; - col = <&pio15 3 ALT2 IN BYPASS 1000>; - mdio= <&pio15 4 ALT2 OUT BYPASS 1500>; - mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; - - rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>; - rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>; - phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>; - }; - }; - - pinctrl_gmii0: gmii0 { - st,pins { - }; - }; - pinctrl_rgmii0: rgmii0 { - st,pins { - phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>; - txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>; - txd0 = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>; - txd1 = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>; - txd2 = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>; - txd3 = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>; - txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>; - - mdio = <&pio15 4 ALT2 OUT BYPASS 0>; - mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>; - - rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>; - rxd0 =<&pio16 0 ALT2 IN DE_IO 500 CLK_A>; - rxd1 =<&pio16 1 ALT2 IN DE_IO 500 CLK_A>; - rxd2 =<&pio16 2 ALT2 IN DE_IO 500 CLK_A>; - rxd3 =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>; - rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>; - - clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>; - }; - }; - }; - - mmc0 { - pinctrl_mmc0: mmc0 { - st,pins { - mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>; - data0 = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>; - data1 = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>; - data2 = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>; - data3 = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>; - cmd = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>; - wp = <&pio15 3 ALT4 IN>; - data4 = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>; - data5 = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>; - data6 = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>; - data7 = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>; - pwr = <&pio17 1 ALT4 OUT>; - cd = <&pio17 2 ALT4 IN>; - led = <&pio17 3 ALT4 OUT>; - }; - }; - }; - mmc1 { - pinctrl_mmc1: mmc1 { - st,pins { - mmcclk = <&pio15 0 ALT3 BIDIR_PU NICLK 0 CLK_B>; - data0 = <&pio13 7 ALT3 BIDIR_PU BYPASS 0>; - data1 = <&pio14 1 ALT3 BIDIR_PU BYPASS 0>; - data2 = <&pio14 2 ALT3 BIDIR_PU BYPASS 0>; - data3 = <&pio14 3 ALT3 BIDIR_PU BYPASS 0>; - cmd = <&pio15 4 ALT3 BIDIR_PU BYPASS 0>; - data4 = <&pio15 6 ALT3 BIDIR_PU BYPASS 0>; - data5 = <&pio15 7 ALT3 BIDIR_PU BYPASS 0>; - data6 = <&pio16 0 ALT3 BIDIR_PU BYPASS 0>; - data7 = <&pio16 1 ALT3 BIDIR_PU BYPASS 0>; - pwr = <&pio16 2 ALT3 OUT>; - nreset = <&pio13 6 ALT3 OUT>; - }; - }; - }; - - usb { - pinctrl_usb1: usb1 { - st,pins { - oc-detect = <&pio18 0 ALT1 IN>; - pwr-enable = <&pio18 1 ALT1 OUT>; - }; - }; - pinctrl_usb2: usb2 { - st,pins { - oc-detect = <&pio18 2 ALT1 IN>; - pwr-enable = <&pio18 3 ALT1 OUT>; - }; - }; - }; - - pwm0 { - pinctrl_pwm0_chan1_default: pwm0-1-default { - st,pins { - pwm-out = <&pio13 2 ALT2 OUT>; - pwm-capturein = <&pio13 1 ALT2 IN>; - }; - }; - pinctrl_pwm0_chan2_default: pwm0-2-default { - st,pins { - pwm-out = <&pio15 2 ALT4 OUT>; - }; - }; - pinctrl_pwm0_chan3_default: pwm0-3-default { - st,pins { - pwm-out = <&pio17 4 ALT1 OUT>; - }; - }; - }; - - }; - - pin-controller-fvdp-fe { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih416-fvdp-fe-pinctrl"; - st,syscfg = <&syscfg_fvdp_fe>; - reg = <0xfd6bf080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfd6b0000 0x3000>; - - pio100: gpio@fd6b0000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO100"; - }; - pio101: gpio@fd6b1000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO101"; - }; - pio102: gpio@fd6b2000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO102"; - }; - }; - - pin-controller-fvdp-lite { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,stih416-fvdp-lite-pinctrl"; - st,syscfg = <&syscfg_fvdp_lite>; - reg = <0xfd33f080 0x4>; - reg-names = "irqmux"; - interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "irqmux"; - ranges = <0 0xfd330000 0x5000>; - - pio103: gpio@fd330000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0 0x100>; - st,bank-name = "PIO103"; - }; - pio104: gpio@fd331000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x1000 0x100>; - st,bank-name = "PIO104"; - }; - pio105: gpio@fd332000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x2000 0x100>; - st,bank-name = "PIO105"; - }; - pio106: gpio@fd333000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x3000 0x100>; - st,bank-name = "PIO106"; - }; - - pio107: gpio@fd334000 { - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - reg = <0x4000 0x100>; - st,bank-name = "PIO107"; - st,retime-pin-mask = <0xf>; - }; - }; - }; -}; diff --git a/dts/src/arm/stih416.dtsi b/dts/src/arm/stih416.dtsi deleted file mode 100644 index fe1f9cf770..0000000000 --- a/dts/src/arm/stih416.dtsi +++ /dev/null @@ -1,517 +0,0 @@ -/* - * Copyright (C) 2012 STMicroelectronics Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -#include "stih41x.dtsi" -#include "stih416-clock.dtsi" -#include "stih416-pinctrl.dtsi" - -#include <dt-bindings/phy/phy.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/reset/stih416-resets.h> -#include <dt-bindings/interrupt-controller/irq-st.h> -/ { - L2: cache-controller { - compatible = "arm,pl310-cache"; - reg = <0xfffe2000 0x1000>; - arm,data-latency = <3 3 3>; - arm,tag-latency = <2 2 2>; - cache-unified; - cache-level = <2>; - }; - - arm-pmu { - compatible = "arm,cortex-a9-pmu"; - interrupt-parent = <&intc>; - interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - ranges; - compatible = "simple-bus"; - - restart { - compatible = "st,stih416-restart"; - st,syscfg = <&syscfg_sbc>; - status = "okay"; - }; - - powerdown: powerdown-controller { - #reset-cells = <1>; - compatible = "st,stih416-powerdown"; - }; - - softreset: softreset-controller { - #reset-cells = <1>; - compatible = "st,stih416-softreset"; - }; - - syscfg_sbc:sbc-syscfg@fe600000{ - compatible = "st,stih416-sbc-syscfg", "syscon"; - reg = <0xfe600000 0x1000>; - }; - - syscfg_front:front-syscfg@fee10000{ - compatible = "st,stih416-front-syscfg", "syscon"; - reg = <0xfee10000 0x1000>; - }; - - syscfg_rear:rear-syscfg@fe830000{ - compatible = "st,stih416-rear-syscfg", "syscon"; - reg = <0xfe830000 0x1000>; - }; - - /* MPE */ - syscfg_fvdp_fe:fvdp-fe-syscfg@fddf0000{ - compatible = "st,stih416-fvdp-fe-syscfg", "syscon"; - reg = <0xfddf0000 0x1000>; - }; - - syscfg_fvdp_lite:fvdp-lite-syscfg@fd6a0000{ - compatible = "st,stih416-fvdp-lite-syscfg", "syscon"; - reg = <0xfd6a0000 0x1000>; - }; - - syscfg_cpu:cpu-syscfg@fdde0000{ - compatible = "st,stih416-cpu-syscfg", "syscon"; - reg = <0xfdde0000 0x1000>; - }; - - syscfg_compo:compo-syscfg@fd320000{ - compatible = "st,stih416-compo-syscfg", "syscon"; - reg = <0xfd320000 0x1000>; - }; - - syscfg_transport:transport-syscfg@fd690000{ - compatible = "st,stih416-transport-syscfg", "syscon"; - reg = <0xfd690000 0x1000>; - }; - - syscfg_lpm:lpm-syscfg@fe4b5100{ - compatible = "st,stih416-lpm-syscfg", "syscon"; - reg = <0xfe4b5100 0x8>; - }; - - irq-syscfg { - compatible = "st,stih416-irq-syscfg"; - st,syscfg = <&syscfg_cpu>; - st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, - <ST_IRQ_SYSCFG_PMU_1>; - st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, - <ST_IRQ_SYSCFG_DISABLED>; - }; - - serial2: serial@fed32000{ - compatible = "st,asc"; - status = "disabled"; - reg = <0xfed32000 0x2c>; - interrupts = <0 197 0>; - clocks = <&clk_s_a0_ls CLK_ICN_REG>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial2 &pinctrl_serial2_oe>; - }; - - /* SBC_UART1 */ - sbc_serial1: serial@fe531000 { - compatible = "st,asc"; - status = "disabled"; - reg = <0xfe531000 0x2c>; - interrupts = <0 210 0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sbc_serial1>; - clocks = <&clk_sysin>; - }; - - i2c@fed40000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0xfed40000 0x110>; - interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_s_a0_ls CLK_ICN_REG>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0_default>; - - status = "disabled"; - }; - - i2c@fed41000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0xfed41000 0x110>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_s_a0_ls CLK_ICN_REG>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_default>; - - status = "disabled"; - }; - - i2c@fe540000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0xfe540000 0x110>; - interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_sysin>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sbc_i2c0_default>; - - status = "disabled"; - }; - - i2c@fe541000 { - compatible = "st,comms-ssc4-i2c"; - reg = <0xfe541000 0x110>; - interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_sysin>; - clock-names = "ssc"; - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_sbc_i2c1_default>; - - status = "disabled"; - }; - - ethernet0: dwmac@fe810000 { - device_type = "network"; - compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710"; - status = "disabled"; - reg = <0xfe810000 0x8000>; - reg-names = "stmmaceth"; - - interrupts = <0 133 0>, <0 134 0>, <0 135 0>; - interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; - - snps,pbl = <32>; - snps,mixed-burst; - - st,syscon = <&syscfg_rear 0x8bc>; - resets = <&softreset STIH416_ETH0_SOFTRESET>; - reset-names = "stmmaceth"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mii0>; - clock-names = "stmmaceth", "sti-ethclk"; - clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>; - }; - - ethernet1: dwmac@fef08000 { - device_type = "network"; - compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710"; - status = "disabled"; - reg = <0xfef08000 0x8000>; - reg-names = "stmmaceth"; - interrupts = <0 136 0>, <0 137 0>, <0 138 0>; - interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; - - snps,pbl = <32>; - snps,mixed-burst; - - st,syscon = <&syscfg_sbc 0x7f0>; - - resets = <&softreset STIH416_ETH1_SOFTRESET>; - reset-names = "stmmaceth"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mii1>; - clock-names = "stmmaceth", "sti-ethclk"; - clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>; - }; - - rc: rc@fe518000 { - compatible = "st,comms-irb"; - reg = <0xfe518000 0x234>; - interrupts = <0 203 0>; - rx-mode = "infrared"; - clocks = <&clk_sysin>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ir>; - resets = <&softreset STIH416_IRB_SOFTRESET>; - }; - - /* FSM */ - spifsm: spifsm@fe902000 { - compatible = "st,spi-fsm"; - reg = <0xfe902000 0x1000>; - pinctrl-0 = <&pinctrl_fsm>; - - st,syscfg = <&syscfg_rear>; - st,boot-device-reg = <0x958>; - st,boot-device-spi = <0x1a>; - - status = "disabled"; - }; - - keyscan: keyscan@fe4b0000 { - compatible = "st,sti-keyscan"; - status = "disabled"; - reg = <0xfe4b0000 0x2000>; - interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; - clocks = <&clk_sysin>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_keyscan>; - resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>, - <&softreset STIH416_KEYSCAN_SOFTRESET>; - }; - - temp0 { - compatible = "st,stih416-sas-thermal"; - clock-names = "thermal"; - clocks = <&clockgen_c_vcc 14>; - - status = "okay"; - }; - - temp1@fdfe8000 { - compatible = "st,stih416-mpe-thermal"; - reg = <0xfdfe8000 0x10>; - clocks = <&clockgen_e 3>; - clock-names = "thermal"; - interrupts = <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>; - - status = "okay"; - }; - - mmc0: sdhci@fe81e000 { - compatible = "st,sdhci"; - status = "disabled"; - reg = <0xfe81e000 0x1000>; - interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>; - interrupt-names = "mmcirq"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc0>; - clock-names = "mmc"; - clocks = <&clk_s_a1_ls 1>; - }; - - mmc1: sdhci@fe81f000 { - compatible = "st,sdhci"; - status = "disabled"; - reg = <0xfe81f000 0x1000>; - interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>; - interrupt-names = "mmcirq"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc1>; - clock-names = "mmc"; - clocks = <&clk_s_a1_ls 8>; - }; - - miphy365x_phy: phy@fe382000 { - compatible = "st,miphy365x-phy"; - st,syscfg = <&syscfg_rear 0x824 0x828>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - phy_port0: port@fe382000 { - #phy-cells = <1>; - reg = <0xfe382000 0x100>, <0xfe394000 0x100>; - reg-names = "sata", "pcie"; - }; - - phy_port1: port@fe38a000 { - #phy-cells = <1>; - reg = <0xfe38a000 0x100>, <0xfe804000 0x100>; - reg-names = "sata", "pcie"; - }; - }; - - sata0: sata@fe380000 { - compatible = "st,sti-ahci"; - reg = <0xfe380000 0x1000>; - interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>; - interrupt-names = "hostc"; - phys = <&phy_port0 PHY_TYPE_SATA>; - phy-names = "sata-phy"; - resets = <&powerdown STIH416_SATA0_POWERDOWN>, - <&softreset STIH416_SATA0_SOFTRESET>; - reset-names = "pwr-dwn", "sw-rst"; - clock-names = "ahci_clk"; - clocks = <&clk_s_a0_ls CLK_ICN_REG>; - - status = "disabled"; - }; - - usb2_phy: phy@0 { - compatible = "st,stih416-usb-phy"; - #phy-cells = <0>; - st,syscfg = <&syscfg_rear>; - clocks = <&clk_sysin>; - clock-names = "osc_phy"; - }; - - ehci0: usb@fe1ffe00 { - compatible = "st,st-ehci-300x"; - reg = <0xfe1ffe00 0x100>; - interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0>; - clocks = <&clk_s_a1_ls 0>, - <&clockgen_b0 0>; - clock-names = "ic", "clk48"; - phys = <&usb2_phy>; - phy-names = "usb"; - resets = <&powerdown STIH416_USB0_POWERDOWN>, - <&softreset STIH416_USB0_SOFTRESET>; - reset-names = "power", "softreset"; - }; - - ohci0: usb@fe1ffc00 { - compatible = "st,st-ohci-300x"; - reg = <0xfe1ffc00 0x100>; - interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>; - clocks = <&clk_s_a1_ls 0>, - <&clockgen_b0 0>; - clock-names = "ic", "clk48"; - phys = <&usb2_phy>; - phy-names = "usb"; - status = "okay"; - resets = <&powerdown STIH416_USB0_POWERDOWN>, - <&softreset STIH416_USB0_SOFTRESET>; - reset-names = "power", "softreset"; - }; - - ehci1: usb@fe203e00 { - compatible = "st,st-ehci-300x"; - reg = <0xfe203e00 0x100>; - interrupts = <GIC_SPI 150 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb1>; - clocks = <&clk_s_a1_ls 0>, - <&clockgen_b0 0>; - clock-names = "ic", "clk48"; - phys = <&usb2_phy>; - phy-names = "usb"; - resets = <&powerdown STIH416_USB1_POWERDOWN>, - <&softreset STIH416_USB1_SOFTRESET>; - reset-names = "power", "softreset"; - }; - - ohci1: usb@fe203c00 { - compatible = "st,st-ohci-300x"; - reg = <0xfe203c00 0x100>; - interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; - clocks = <&clk_s_a1_ls 0>, - <&clockgen_b0 0>; - clock-names = "ic", "clk48"; - phys = <&usb2_phy>; - phy-names = "usb"; - resets = <&powerdown STIH416_USB1_POWERDOWN>, - <&softreset STIH416_USB1_SOFTRESET>; - reset-names = "power", "softreset"; - }; - - ehci2: usb@fe303e00 { - compatible = "st,st-ehci-300x"; - reg = <0xfe303e00 0x100>; - interrupts = <GIC_SPI 152 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2>; - clocks = <&clk_s_a1_ls 0>, - <&clockgen_b0 0>; - clock-names = "ic", "clk48"; - phys = <&usb2_phy>; - phy-names = "usb"; - resets = <&powerdown STIH416_USB2_POWERDOWN>, - <&softreset STIH416_USB2_SOFTRESET>; - reset-names = "power", "softreset"; - }; - - ohci2: usb@fe303c00 { - compatible = "st,st-ohci-300x"; - reg = <0xfe303c00 0x100>; - interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>; - clocks = <&clk_s_a1_ls 0>, - <&clockgen_b0 0>; - clock-names = "ic", "clk48"; - phys = <&usb2_phy>; - phy-names = "usb"; - resets = <&powerdown STIH416_USB2_POWERDOWN>, - <&softreset STIH416_USB2_SOFTRESET>; - reset-names = "power", "softreset"; - }; - - ehci3: usb@fe343e00 { - compatible = "st,st-ehci-300x"; - reg = <0xfe343e00 0x100>; - interrupts = <GIC_SPI 154 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb3>; - clocks = <&clk_s_a1_ls 0>, - <&clockgen_b0 0>; - clock-names = "ic", "clk48"; - phys = <&usb2_phy>; - phy-names = "usb"; - resets = <&powerdown STIH416_USB3_POWERDOWN>, - <&softreset STIH416_USB3_SOFTRESET>; - reset-names = "power", "softreset"; - }; - - ohci3: usb@fe343c00 { - compatible = "st,st-ohci-300x"; - reg = <0xfe343c00 0x100>; - interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>; - clocks = <&clk_s_a1_ls 0>, - <&clockgen_b0 0>; - clock-names = "ic", "clk48"; - phys = <&usb2_phy>; - phy-names = "usb"; - resets = <&powerdown STIH416_USB3_POWERDOWN>, - <&softreset STIH416_USB3_SOFTRESET>; - reset-names = "power", "softreset"; - }; - - /* SAS PWM Module */ - pwm0: pwm@fed10000 { - compatible = "st,sti-pwm"; - status = "disabled"; - #pwm-cells = <2>; - reg = <0xfed10000 0x68>; - interrupts = <GIC_SPI 200 IRQ_TYPE_NONE>; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm0_chan0_default - &pinctrl_pwm0_chan1_default - &pinctrl_pwm0_chan2_default - &pinctrl_pwm0_chan3_default>; - - clock-names = "pwm", "capture"; - clocks = <&clk_sysin>, <&clk_s_a0_ls CLK_ICN_REG>; - - st,pwm-num-chan = <4>; - st,capture-num-chan = <2>; - }; - - /* SBC PWM Module */ - pwm1: pwm@fe510000 { - compatible = "st,sti-pwm"; - status = "disabled"; - #pwm-cells = <2>; - reg = <0xfe510000 0x68>; - interrupts = <GIC_SPI 202 IRQ_TYPE_NONE>; - - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1_chan0_default - /* - * Shared with SBC_OBS_NOTRST. Don't - * enable unless you really know what - * you're doing. - * - * &pinctrl_pwm1_chan1_default - */ - &pinctrl_pwm1_chan2_default - &pinctrl_pwm1_chan3_default>; - - clock-names = "pwm"; - clocks = <&clk_sysin>; - st,pwm-num-chan = <3>; - }; - }; -}; diff --git a/dts/src/arm/stih41x-b2000.dtsi b/dts/src/arm/stih41x-b2000.dtsi deleted file mode 100644 index 9bfa0674b4..0000000000 --- a/dts/src/arm/stih41x-b2000.dtsi +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -#include <dt-bindings/input/input.h> -#include <dt-bindings/gpio/gpio.h> - -/ { - - memory{ - device_type = "memory"; - reg = <0x60000000 0x40000000>; - }; - - chosen { - bootargs = "console=ttyAS0,115200 clk_ignore_unused"; - linux,stdout-path = &serial2; - }; - - aliases { - ttyAS0 = &serial2; - ethernet0 = ðernet0; - ethernet1 = ðernet1; - }; - - soc { - serial2: serial@fed32000 { - status = "okay"; - }; - - leds { - compatible = "gpio-leds"; - fp_led { - label = "Front Panel LED"; - gpios = <&pio105 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - /* HDMI Tx I2C */ - i2c@fed41000 { - /* HDMI V1.3a supports Standard mode only */ - clock-frequency = <100000>; - i2c-min-scl-pulse-width-us = <0>; - i2c-min-sda-pulse-width-us = <5>; - - status = "okay"; - }; - - ethernet0: dwmac@fe810000 { - status = "okay"; - phy-mode = "mii"; - pinctrl-0 = <&pinctrl_mii0>; - - snps,reset-gpio = <&pio106 2>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 10000>; - }; - - ethernet1: dwmac@fef08000 { - status = "disabled"; - phy-mode = "mii"; - st,tx-retime-src = "txclk"; - - snps,reset-gpio = <&pio4 7>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 10000>; - }; - - keyscan: keyscan@fe4b0000 { - keypad,num-rows = <4>; - keypad,num-columns = <4>; - st,debounce-us = <5000>; - linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13) - MATRIX_KEY(0x00, 0x01, KEY_F9) - MATRIX_KEY(0x00, 0x02, KEY_F5) - MATRIX_KEY(0x00, 0x03, KEY_F1) - MATRIX_KEY(0x01, 0x00, KEY_F14) - MATRIX_KEY(0x01, 0x01, KEY_F10) - MATRIX_KEY(0x01, 0x02, KEY_F6) - MATRIX_KEY(0x01, 0x03, KEY_F2) - MATRIX_KEY(0x02, 0x00, KEY_F15) - MATRIX_KEY(0x02, 0x01, KEY_F11) - MATRIX_KEY(0x02, 0x02, KEY_F7) - MATRIX_KEY(0x02, 0x03, KEY_F3) - MATRIX_KEY(0x03, 0x00, KEY_F16) - MATRIX_KEY(0x03, 0x01, KEY_F12) - MATRIX_KEY(0x03, 0x02, KEY_F8) - MATRIX_KEY(0x03, 0x03, KEY_F4) >; - }; - }; -}; diff --git a/dts/src/arm/stih41x-b2020.dtsi b/dts/src/arm/stih41x-b2020.dtsi deleted file mode 100644 index 322e0e9517..0000000000 --- a/dts/src/arm/stih41x-b2020.dtsi +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -#include "stih41x-b2020x.dtsi" -#include <dt-bindings/gpio/gpio.h> -/ { - memory{ - device_type = "memory"; - reg = <0x40000000 0x80000000>; - }; - - chosen { - bootargs = "console=ttyAS0,115200 clk_ignore_unused"; - linux,stdout-path = &sbc_serial1; - }; - - aliases { - ttyAS0 = &sbc_serial1; - ethernet1 = ðernet1; - }; - soc { - sbc_serial1: serial@fe531000 { - status = "okay"; - }; - - leds { - compatible = "gpio-leds"; - red { - label = "Front Panel LED"; - gpios = <&pio4 1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - green { - gpios = <&pio4 7 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - i2c@fed40000 { - status = "okay"; - }; - - /* HDMI Tx I2C */ - i2c@fed41000 { - /* HDMI V1.3a supports Standard mode only */ - clock-frequency = <100000>; - i2c-min-scl-pulse-width-us = <0>; - i2c-min-sda-pulse-width-us = <5>; - - status = "okay"; - }; - - i2c@fe540000 { - status = "okay"; - }; - - i2c@fe541000 { - status = "okay"; - }; - - ethernet1: dwmac@fef08000 { - status = "okay"; - phy-mode = "rgmii-id"; - max-speed = <1000>; - st,tx-retime-src = "clk_125"; - snps,reset-gpio = <&pio3 0>; - snps,reset-active-low; - snps,reset-delays-us = <0 10000 10000>; - - pinctrl-0 = <&pinctrl_rgmii1>; - }; - - mmc0: sdhci@fe81e000 { - bus-width = <8>; - }; - }; -}; diff --git a/dts/src/arm/stih41x-b2020x.dtsi b/dts/src/arm/stih41x-b2020x.dtsi deleted file mode 100644 index f797a06073..0000000000 --- a/dts/src/arm/stih41x-b2020x.dtsi +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Copyright (C) 2013 STMicroelectronics (R&D) Limited. - * Author: Lee Jones <lee.jones@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -/ { - soc { - mmc0: sdhci@fe81e000 { - status = "okay"; - }; - - spifsm: spifsm@fe902000 { - #address-cells = <1>; - #size-cells = <1>; - - status = "okay"; - - partition@0 { - label = "SerialFlash1"; - reg = <0x00000000 0x00500000>; - }; - - partition@500000 { - label = "SerialFlash2"; - reg = <0x00500000 0x00b00000>; - }; - }; - }; -}; diff --git a/dts/src/arm/stih41x.dtsi b/dts/src/arm/stih41x.dtsi deleted file mode 100644 index 5cb0e63376..0000000000 --- a/dts/src/arm/stih41x.dtsi +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Copyright (C) 2014 STMicroelectronics Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publishhed by the Free Software Foundation. - */ -/ { - #address-cells = <1>; - #size-cells = <1>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <0>; - }; - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a9"; - reg = <1>; - }; - }; - - intc: interrupt-controller@fffe1000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0xfffe1000 0x1000>, - <0xfffe0100 0x100>; - }; - - scu@fffe0000 { - compatible = "arm,cortex-a9-scu"; - reg = <0xfffe0000 0x1000>; - }; - - timer@fffe0200 { - interrupt-parent = <&intc>; - compatible = "arm,cortex-a9-global-timer"; - reg = <0xfffe0200 0x100>; - interrupts = <1 11 0x04>; - clocks = <&arm_periph_clk>; - }; -}; diff --git a/dts/src/arm/stihxxx-b2120.dtsi b/dts/src/arm/stihxxx-b2120.dtsi index ed2b7a99ec..4b8f62f896 100644 --- a/dts/src/arm/stihxxx-b2120.dtsi +++ b/dts/src/arm/stihxxx-b2120.dtsi @@ -135,6 +135,10 @@ }; }; + sti_uni_player0: sti-uni-player@8d80000 { + status = "okay"; + }; + sti_uni_player2: sti-uni-player@8d82000 { status = "okay"; }; @@ -151,13 +155,26 @@ sound { compatible = "simple-audio-card"; - simple-audio-card,name = "sti audio card"; + simple-audio-card,name = "STI-B2120"; status = "okay"; simple-audio-card,dai-link@0 { + /* HDMI */ + format = "i2s"; + mclk-fs = <128>; + cpu { + sound-dai = <&sti_uni_player0>; + }; + + codec { + sound-dai = <&sti_hdmi>; + }; + }; + simple-audio-card,dai-link@1 { /* DAC */ format = "i2s"; mclk-fs = <256>; + frame-inversion = <1>; cpu { sound-dai = <&sti_uni_player2>; }; @@ -166,7 +183,7 @@ sound-dai = <&sti_sasg_codec 1>; }; }; - simple-audio-card,dai-link@1 { + simple-audio-card,dai-link@2 { /* SPDIF */ format = "left_j"; mclk-fs = <128>; diff --git a/dts/src/arm/stm32429i-eval.dts b/dts/src/arm/stm32429i-eval.dts index 6bfc5959da..5436e880e2 100644 --- a/dts/src/arm/stm32429i-eval.dts +++ b/dts/src/arm/stm32429i-eval.dts @@ -47,6 +47,7 @@ /dts-v1/; #include "stm32f429.dtsi" +#include <dt-bindings/input/input.h> / { model = "STMicroelectronics STM32429i-EVAL board"; @@ -65,6 +66,10 @@ serial0 = &usart1; }; + soc { + dma-ranges = <0xc0000000 0x0 0x10000000>; + }; + leds { compatible = "gpio-leds"; green { @@ -82,6 +87,23 @@ }; }; + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + button@0 { + label = "Wake up"; + linux,code = <KEY_WAKEUP>; + gpios = <&gpioa 0 0>; + }; + button@1 { + label = "Tamper"; + linux,code = <KEY_RESTART>; + gpios = <&gpioc 13 0>; + }; + }; + usbotg_hs_phy: usbphy { #phy-cells = <0>; compatible = "usb-nop-xceiv"; @@ -94,11 +116,12 @@ clock-frequency = <25000000>; }; -ðernet0 { +&mac { status = "okay"; - pinctrl-0 = <ðernet0_mii>; + pinctrl-0 = <ðernet_mii>; pinctrl-names = "default"; - phy-mode = "mii-id"; + phy-mode = "mii"; + phy-handle = <&phy1>; mdio0 { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/src/arm/stm32746g-eval.dts b/dts/src/arm/stm32746g-eval.dts new file mode 100644 index 0000000000..aa03fac1ec --- /dev/null +++ b/dts/src/arm/stm32746g-eval.dts @@ -0,0 +1,96 @@ +/* + * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32f746.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "STMicroelectronics STM32746g-EVAL board"; + compatible = "st,stm32746g-eval", "st,stm32f746"; + + chosen { + bootargs = "root=/dev/ram"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0xc0000000 0x2000000>; + }; + + aliases { + serial0 = &usart1; + }; + + leds { + compatible = "gpio-leds"; + green { + gpios = <&gpiof 10 1>; + linux,default-trigger = "heartbeat"; + }; + red { + gpios = <&gpiob 7 1>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + button@0 { + label = "Wake up"; + linux,code = <KEY_WAKEUP>; + gpios = <&gpioc 13 0>; + }; + }; +}; + +&clk_hse { + clock-frequency = <25000000>; +}; + +&usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/dts/src/arm/stm32f429-disco.dts b/dts/src/arm/stm32f429-disco.dts index 01408073dd..7d0415e806 100644 --- a/dts/src/arm/stm32f429-disco.dts +++ b/dts/src/arm/stm32f429-disco.dts @@ -47,6 +47,7 @@ /dts-v1/; #include "stm32f429.dtsi" +#include <dt-bindings/input/input.h> / { model = "STMicroelectronics STM32F429i-DISCO board"; @@ -75,6 +76,18 @@ linux,default-trigger = "heartbeat"; }; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + button@0 { + label = "User"; + linux,code = <KEY_HOME>; + gpios = <&gpioa 0 0>; + }; + }; }; &clk_hse { diff --git a/dts/src/arm/stm32f429.dtsi b/dts/src/arm/stm32f429.dtsi index 336ee4fb58..e4dae0eda3 100644 --- a/dts/src/arm/stm32f429.dtsi +++ b/dts/src/arm/stm32f429.dtsi @@ -56,11 +56,21 @@ compatible = "fixed-clock"; clock-frequency = <0>; }; + + clk-lse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + clk-lsi { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32000>; + }; }; soc { - dma-ranges = <0xc0000000 0x0 0x10000000>; - timer2: timer@40000000 { compatible = "st,stm32-timer"; reg = <0x40000000 0x400>; @@ -122,6 +132,9 @@ interrupts = <39>; clocks = <&rcc 0 146>; status = "disabled"; + dmas = <&dma1 1 4 0x400 0x0>, + <&dma1 3 4 0x400 0x0>; + dma-names = "rx", "tx"; }; usart4: serial@40004c00 { @@ -162,6 +175,9 @@ interrupts = <37>; clocks = <&rcc 0 164>; status = "disabled"; + dmas = <&dma2 2 4 0x400 0x0>, + <&dma2 7 4 0x400 0x0>; + dma-names = "rx", "tx"; }; usart6: serial@40011400 { @@ -185,11 +201,18 @@ interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; }; + pwrcfg: power-config@40007000 { + compatible = "syscon"; + reg = <0x40007000 0x400>; + }; + pin-controller { #address-cells = <1>; #size-cells = <1>; compatible = "st,stm32f429-pinctrl"; ranges = <0 0x40020000 0x3000>; + interrupt-parent = <&exti>; + st,syscfg = <&syscfg 0x8>; pins-are-numbered; gpioa: gpio@40020000 { @@ -313,7 +336,7 @@ }; }; - ethernet0_mii: mii@0 { + ethernet_mii: mii@0 { pins { pinmux = <STM32F429_PG13_FUNC_ETH_MII_TXD0_ETH_RMII_TXD0>, <STM32F429_PG14_FUNC_ETH_MII_TXD1_ETH_RMII_TXD1>, @@ -340,6 +363,7 @@ compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; reg = <0x40023800 0x400>; clocks = <&clk_hse>; + st,syscfg = <&pwrcfg>; }; dma1: dma-controller@40026000 { @@ -373,24 +397,22 @@ st,mem2mem; }; - ethernet0: dwmac@40028000 { + mac: ethernet@40028000 { compatible = "st,stm32-dwmac", "snps,dwmac-3.50a"; reg = <0x40028000 0x8000>; reg-names = "stmmaceth"; - interrupts = <61>, <62>; - interrupt-names = "macirq", "eth_wake_irq"; - clock-names = "stmmaceth", "tx-clk", "rx-clk"; + interrupts = <61>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", "mac-clk-tx", "mac-clk-rx"; clocks = <&rcc 0 25>, <&rcc 0 26>, <&rcc 0 27>; st,syscon = <&syscfg 0x4>; snps,pbl = <8>; snps,mixed-burst; - dma-ranges; status = "disabled"; }; usbotg_hs: usb@40040000 { compatible = "snps,dwc2"; - dma-ranges; reg = <0x40040000 0x40000>; interrupts = <77>; clocks = <&rcc 0 29>; diff --git a/dts/src/arm/stm32f469-disco.dts b/dts/src/arm/stm32f469-disco.dts index e911af8364..8877c00ce8 100644 --- a/dts/src/arm/stm32f469-disco.dts +++ b/dts/src/arm/stm32f469-disco.dts @@ -64,6 +64,14 @@ aliases { serial0 = &usart3; }; + + soc { + dma-ranges = <0xc0000000 0x0 0x10000000>; + }; +}; + +&rcc { + compatible = "st,stm32f469-rcc", "st,stm32f42xx-rcc", "st,stm32-rcc"; }; &clk_hse { diff --git a/dts/src/arm/stm32f746.dtsi b/dts/src/arm/stm32f746.dtsi new file mode 100644 index 0000000000..f321ffe871 --- /dev/null +++ b/dts/src/arm/stm32f746.dtsi @@ -0,0 +1,304 @@ +/* + * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" +#include "armv7-m.dtsi" +#include <dt-bindings/pinctrl/stm32f746-pinfunc.h> + +/ { + clocks { + clk_hse: clk-hse { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + }; + + soc { + timer2: timer@40000000 { + compatible = "st,stm32-timer"; + reg = <0x40000000 0x400>; + interrupts = <28>; + clocks = <&rcc 0 128>; + status = "disabled"; + }; + + timer3: timer@40000400 { + compatible = "st,stm32-timer"; + reg = <0x40000400 0x400>; + interrupts = <29>; + clocks = <&rcc 0 129>; + status = "disabled"; + }; + + timer4: timer@40000800 { + compatible = "st,stm32-timer"; + reg = <0x40000800 0x400>; + interrupts = <30>; + clocks = <&rcc 0 130>; + status = "disabled"; + }; + + timer5: timer@40000c00 { + compatible = "st,stm32-timer"; + reg = <0x40000c00 0x400>; + interrupts = <50>; + clocks = <&rcc 0 131>; + }; + + timer6: timer@40001000 { + compatible = "st,stm32-timer"; + reg = <0x40001000 0x400>; + interrupts = <54>; + clocks = <&rcc 0 132>; + status = "disabled"; + }; + + timer7: timer@40001400 { + compatible = "st,stm32-timer"; + reg = <0x40001400 0x400>; + interrupts = <55>; + clocks = <&rcc 0 133>; + status = "disabled"; + }; + + usart2: serial@40004400 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40004400 0x400>; + interrupts = <38>; + clocks = <&rcc 0 145>; + status = "disabled"; + }; + + usart3: serial@40004800 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40004800 0x400>; + interrupts = <39>; + clocks = <&rcc 0 146>; + status = "disabled"; + }; + + usart4: serial@40004c00 { + compatible = "st,stm32f7-uart"; + reg = <0x40004c00 0x400>; + interrupts = <52>; + clocks = <&rcc 0 147>; + status = "disabled"; + }; + + usart5: serial@40005000 { + compatible = "st,stm32f7-uart"; + reg = <0x40005000 0x400>; + interrupts = <53>; + clocks = <&rcc 0 148>; + status = "disabled"; + }; + + usart7: serial@40007800 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40007800 0x400>; + interrupts = <82>; + clocks = <&rcc 0 158>; + status = "disabled"; + }; + + usart8: serial@40007c00 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40007c00 0x400>; + interrupts = <83>; + clocks = <&rcc 0 159>; + status = "disabled"; + }; + + usart1: serial@40011000 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40011000 0x400>; + interrupts = <37>; + clocks = <&rcc 0 164>; + status = "disabled"; + }; + + usart6: serial@40011400 { + compatible = "st,stm32f7-usart", "st,stm32f7-uart"; + reg = <0x40011400 0x400>; + interrupts = <71>; + clocks = <&rcc 0 165>; + status = "disabled"; + }; + + syscfg: system-config@40013800 { + compatible = "syscon"; + reg = <0x40013800 0x400>; + }; + + exti: interrupt-controller@40013c00 { + compatible = "st,stm32-exti"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x40013C00 0x400>; + interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>; + }; + + pin-controller { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stm32f746-pinctrl"; + ranges = <0 0x40020000 0x3000>; + interrupt-parent = <&exti>; + st,syscfg = <&syscfg 0x8>; + pins-are-numbered; + + gpioa: gpio@40020000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x0 0x400>; + clocks = <&rcc 0 256>; + st,bank-name = "GPIOA"; + }; + + gpiob: gpio@40020400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x400 0x400>; + clocks = <&rcc 0 257>; + st,bank-name = "GPIOB"; + }; + + gpioc: gpio@40020800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x800 0x400>; + clocks = <&rcc 0 258>; + st,bank-name = "GPIOC"; + }; + + gpiod: gpio@40020c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0xc00 0x400>; + clocks = <&rcc 0 259>; + st,bank-name = "GPIOD"; + }; + + gpioe: gpio@40021000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1000 0x400>; + clocks = <&rcc 0 260>; + st,bank-name = "GPIOE"; + }; + + gpiof: gpio@40021400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1400 0x400>; + clocks = <&rcc 0 261>; + st,bank-name = "GPIOF"; + }; + + gpiog: gpio@40021800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1800 0x400>; + clocks = <&rcc 0 262>; + st,bank-name = "GPIOG"; + }; + + gpioh: gpio@40021c00 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x1c00 0x400>; + clocks = <&rcc 0 263>; + st,bank-name = "GPIOH"; + }; + + gpioi: gpio@40022000 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2000 0x400>; + clocks = <&rcc 0 264>; + st,bank-name = "GPIOI"; + }; + + gpioj: gpio@40022400 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2400 0x400>; + clocks = <&rcc 0 265>; + st,bank-name = "GPIOJ"; + }; + + gpiok: gpio@40022800 { + gpio-controller; + #gpio-cells = <2>; + reg = <0x2800 0x400>; + clocks = <&rcc 0 266>; + st,bank-name = "GPIOK"; + }; + + usart1_pins_a: usart1@0 { + pins1 { + pinmux = <STM32F746_PA9_FUNC_USART1_TX>; + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32F746_PA10_FUNC_USART1_RX>; + bias-disable; + }; + }; + }; + + rcc: rcc@40023800 { + #clock-cells = <2>; + compatible = "st,stm32f42xx-rcc", "st,stm32-rcc"; + reg = <0x40023800 0x400>; + clocks = <&clk_hse>; + }; + }; +}; + +&systick { + clocks = <&rcc 1 0>; + status = "okay"; +}; diff --git a/dts/src/arm/sun4i-a10.dtsi b/dts/src/arm/sun4i-a10.dtsi index 7e7dfc2b43..b14a428105 100644 --- a/dts/src/arm/sun4i-a10.dtsi +++ b/dts/src/arm/sun4i-a10.dtsi @@ -967,7 +967,8 @@ compatible = "allwinner,sun4i-a10-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <28>; - clocks = <&apb0_gates 5>; + clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; diff --git a/dts/src/arm/sun5i-a10s-olinuxino-micro.dts b/dts/src/arm/sun5i-a10s-olinuxino-micro.dts index aef91476f9..0684d7930d 100644 --- a/dts/src/arm/sun5i-a10s-olinuxino-micro.dts +++ b/dts/src/arm/sun5i-a10s-olinuxino-micro.dts @@ -250,8 +250,8 @@ &spi2 { pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>, - <&spi2_cs0_pins_a>; + pinctrl-0 = <&spi2_pins_b>, + <&spi2_cs0_pins_b>; status = "okay"; }; diff --git a/dts/src/arm/sun5i-a10s.dtsi b/dts/src/arm/sun5i-a10s.dtsi index c41a2ba34d..7aa8c7aa01 100644 --- a/dts/src/arm/sun5i-a10s.dtsi +++ b/dts/src/arm/sun5i-a10s.dtsi @@ -243,14 +243,14 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - spi2_pins_a: spi2@0 { + spi2_pins_b: spi2@1 { allwinner,pins = "PB12", "PB13", "PB14"; allwinner,function = "spi2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - spi2_cs0_pins_a: spi2_cs0@0 { + spi2_cs0_pins_b: spi2_cs0@1 { allwinner,pins = "PB11"; allwinner,function = "spi2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; diff --git a/dts/src/arm/sun5i-a13-olinuxino.dts b/dts/src/arm/sun5i-a13-olinuxino.dts index b3c234c65e..bb7210e0e4 100644 --- a/dts/src/arm/sun5i-a13-olinuxino.dts +++ b/dts/src/arm/sun5i-a13-olinuxino.dts @@ -72,6 +72,47 @@ default-state = "on"; }; }; + + bridge { + compatible = "dumb-vga-dac"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&tcon0_out_vga>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; +}; + +&be0 { + status = "okay"; }; &ehci0 { @@ -211,6 +252,19 @@ status = "okay"; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + status = "okay"; +}; + +&tcon0_out { + tcon0_out_vga: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_bridge_in>; + }; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins_b>; diff --git a/dts/src/arm/sun5i-a13-utoo-p66.dts b/dts/src/arm/sun5i-a13-utoo-p66.dts index a8b0bcc045..3d7ff10a48 100644 --- a/dts/src/arm/sun5i-a13-utoo-p66.dts +++ b/dts/src/arm/sun5i-a13-utoo-p66.dts @@ -83,22 +83,6 @@ allwinner,pins = "PG3"; }; -&i2c1 { - icn8318: touchscreen@40 { - compatible = "chipone,icn8318"; - reg = <0x40>; - interrupt-parent = <&pio>; - interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_wake_pin_p66>; - wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - touchscreen-inverted-x; - touchscreen-swapped-x-y; - }; -}; - &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_a>; @@ -121,20 +105,26 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - - ts_wake_pin_p66: ts_wake_pin@0 { - allwinner,pins = "PB3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; ®_usb0_vbus { gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ }; +&touchscreen { + compatible = "chipone,icn8318"; + reg = <0x40>; + /* The P66 uses a different EINT then the reference design */ + interrupts = <6 9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ + /* The icn8318 binding expects wake-gpios instead of power-gpios */ + wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + status = "okay"; +}; + &uart1 { /* The P66 uses the uart pins as gpios */ status = "disabled"; diff --git a/dts/src/arm/sun5i-gr8-chip-pro.dts b/dts/src/arm/sun5i-gr8-chip-pro.dts new file mode 100644 index 0000000000..92a2dc6250 --- /dev/null +++ b/dts/src/arm/sun5i-gr8-chip-pro.dts @@ -0,0 +1,266 @@ +/* + * Copyright 2016 Free Electrons + * Copyright 2016 NextThing Co + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-gr8.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "NextThing C.H.I.P. Pro"; + compatible = "nextthing,chip-pro", "nextthing,gr8"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + status { + label = "chip-pro:white:status"; + gpios = <&axp_gpio 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + mmc0_pwrseq: mmc0_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_reg_on_pin_chip_pro>; + reset-gpios = <&pio 1 10 GPIO_ACTIVE_LOW>; /* PB10 */ + }; +}; + +&codec { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + + /* + * The interrupt is routed through the "External Fast + * Interrupt Request" pin (ball G13 of the module) + * directly to the main interrupt controller, without + * any other controller interfering. + */ + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "disabled"; +}; + +&i2s0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_mclk_pins_a>, <&i2s0_data_pins_a>; + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc0_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; + status = "okay"; + + nand@0 { + #address-cells = <2>; + #size-cells = <2>; + reg = <0>; + allwinner,rb = <0>; + nand-ecc-mode = "hw"; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_pin_chip_pro: usb0-id-pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + wifi_reg_on_pin_chip_pro: wifi-reg-on-pin@0 { + allwinner,pins = "PB10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins>; + status = "disabled"; +}; + +®_dcdc2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; + regulator-always-on; +}; + +®_dcdc3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-sys"; + regulator-always-on; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; + regulator-always-on; +}; + +/* + * Both LDO3 and LDO4 are used in parallel to power up the + * WiFi/BT chip. + */ +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-1"; + regulator-always-on; +}; + +®_ldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; + regulator-always-on; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>, <&uart1_cts_rts_pins_a>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>, <&uart2_cts_rts_pins_a>; + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>, <&uart3_cts_rts_pins_a>; + status = "okay"; +}; + +&usb_otg { + /* + * The CHIP Pro doesn't have a controllable VBUS, nor does it + * have any 5v rail on the board itself. + * + * If one wants to use it as a true OTG port, it should be + * done in the baseboard, and its DT / overlay will add it. + */ + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_pin_chip_pro>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb1_vbus-supply = <®_vcc5v0>; + status = "okay"; +}; diff --git a/dts/src/arm/sun5i-gr8-evb.dts b/dts/src/arm/sun5i-gr8-evb.dts index 714381fd64..030605aa80 100644 --- a/dts/src/arm/sun5i-gr8-evb.dts +++ b/dts/src/arm/sun5i-gr8-evb.dts @@ -75,6 +75,39 @@ brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; default-brightness-level = <8>; }; + + sound-analog { + compatible = "simple-audio-card"; + simple-audio-card,name = "gr8-evb-wm8978"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <512>; + + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + + simple-audio-card,codec { + sound-dai = <&wm8978>; + }; + }; + + sound-spdif { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; }; &be0 { diff --git a/dts/src/arm/sun5i-gr8.dtsi b/dts/src/arm/sun5i-gr8.dtsi index ca54e03ef3..ea86d4d58d 100644 --- a/dts/src/arm/sun5i-gr8.dtsi +++ b/dts/src/arm/sun5i-gr8.dtsi @@ -792,7 +792,7 @@ }; i2s0_mclk_pins_a: i2s0-mclk@0 { - allwinner,pins = "PB6", "PB7", "PB8", "PB9"; + allwinner,pins = "PB5"; allwinner,function = "i2s0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; @@ -854,6 +854,13 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + pwm1_pins: pwm1 { + allwinner,pins = "PG13"; + allwinner,function = "pwm1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + spdif_tx_pins_a: spdif@0 { allwinner,pins = "PB10"; allwinner,function = "spdif"; @@ -874,6 +881,34 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + uart2_pins_a: uart2@1 { + allwinner,pins = "PD2", "PD3"; + allwinner,function = "uart2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart2_cts_rts_pins_a: uart2-cts-rts@0 { + allwinner,pins = "PD4", "PD5"; + allwinner,function = "uart2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart3_pins_a: uart3@1 { + allwinner,pins = "PG9", "PG10"; + allwinner,function = "uart3"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + uart3_cts_rts_pins_a: uart3-cts-rts@0 { + allwinner,pins = "PG11", "PG12"; + allwinner,function = "uart3"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; pwm: pwm@01c20e00 { @@ -978,6 +1013,16 @@ status = "disabled"; }; + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 19>; + status = "disabled"; + }; + i2c0: i2c@01c2ac00 { compatible = "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; diff --git a/dts/src/arm/sun5i-r8-chip.dts b/dts/src/arm/sun5i-r8-chip.dts index b68a12374b..c6da5ad371 100644 --- a/dts/src/arm/sun5i-r8-chip.dts +++ b/dts/src/arm/sun5i-r8-chip.dts @@ -56,9 +56,11 @@ aliases { i2c0 = &i2c0; + i2c1 = &i2c1; i2c2 = &i2c2; serial0 = &uart1; serial1 = &uart3; + spi0 = &spi2; }; chosen { @@ -74,6 +76,20 @@ default-state = "on"; }; }; + + mmc0_pwrseq: mmc0_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&chip_wifi_reg_on_pin>; + reset-gpios = <&pio 2 19 GPIO_ACTIVE_LOW>; /* PC19 */ + }; + + onewire { + compatible = "w1-gpio"; + gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ + pinctrl-names = "default"; + pinctrl-0 = <&chip_w1_pin>; + }; }; &be0 { @@ -112,6 +128,12 @@ #include "axp209.dtsi" +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "disabled"; +}; + &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; @@ -131,10 +153,15 @@ }; }; +&mmc0_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>; vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc0_pwrseq>; bus-width = <4>; non-removable; status = "okay"; @@ -156,12 +183,26 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + chip_wifi_reg_on_pin: chip_wifi_reg_on_pin@0 { + allwinner,pins = "PC19"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + chip_id_det_pin: chip_id_det_pin@0 { allwinner,pins = "PG2"; allwinner,function = "gpio_in"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + chip_w1_pin: chip_w1_pin@0 { + allwinner,pins = "PD2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; }; ®_dcdc2 { @@ -189,6 +230,28 @@ regulator-always-on; }; +/* + * Both LDO3 and LDO4 are used in parallel to power up the WiFi/BT + * Chip. + * + * If those are not enabled, the SDIO part will not enumerate, and + * since there's no way currently to pass DT infos to an SDIO device, + * we cannot really do better than this ugly hack for now. + */ +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-1"; + regulator-always-on; +}; + +®_ldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-2"; + regulator-always-on; +}; + ®_ldo5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -202,6 +265,12 @@ status = "okay"; }; +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "disabled"; +}; + &tcon0 { status = "okay"; }; diff --git a/dts/src/arm/sun5i-reference-design-tablet.dtsi b/dts/src/arm/sun5i-reference-design-tablet.dtsi index 20cc940f5f..82f87cdcd1 100644 --- a/dts/src/arm/sun5i-reference-design-tablet.dtsi +++ b/dts/src/arm/sun5i-reference-design-tablet.dtsi @@ -41,6 +41,7 @@ */ #include "sunxi-reference-design-tablet.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> / { @@ -84,6 +85,23 @@ }; &i2c1 { + /* + * The gsl1680 is rated at 400KHz and it will not work reliable at + * 100KHz, this has been confirmed on multiple different q8 tablets. + * All other devices on this bus are also rated for 400KHz. + */ + clock-frequency = <400000>; + + touchscreen: touchscreen { + interrupt-parent = <&pio>; + interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */ + pinctrl-names = "default"; + pinctrl-0 = <&ts_power_pin>; + power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + /* Tablet dts must provide reg and compatible */ + status = "disabled"; + }; + pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; @@ -125,6 +143,13 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + ts_power_pin: ts_power_pin { + pins = "PB3"; + function = "gpio_out"; + drive-strength = <10>; + bias-disable; + }; + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { allwinner,pins = "PG1"; allwinner,function = "gpio_in"; diff --git a/dts/src/arm/sun5i.dtsi b/dts/src/arm/sun5i.dtsi index e374f4fc80..b0fca4ef4d 100644 --- a/dts/src/arm/sun5i.dtsi +++ b/dts/src/arm/sun5i.dtsi @@ -547,7 +547,8 @@ pio: pinctrl@01c20800 { reg = <0x01c20800 0x400>; interrupts = <28>; - clocks = <&apb0_gates 5>; + clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; @@ -574,6 +575,16 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + lcd_rgb565_pins: lcd_rgb565@0 { + allwinner,pins = "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + allwinner,function = "lcd0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -591,6 +602,20 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + spi2_pins_a: spi2@0 { + allwinner,pins = "PE1", "PE2", "PE3"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi2_cs0_pins_a: spi2-cs0@0 { + allwinner,pins = "PE0"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + uart3_pins_a: uart3@0 { allwinner,pins = "PG9", "PG10"; allwinner,function = "uart3"; diff --git a/dts/src/arm/sun6i-a31-hummingbird.dts b/dts/src/arm/sun6i-a31-hummingbird.dts index 9a74637f67..735914f6ae 100644 --- a/dts/src/arm/sun6i-a31-hummingbird.dts +++ b/dts/src/arm/sun6i-a31-hummingbird.dts @@ -63,12 +63,79 @@ stdout-path = "serial0:115200n8"; }; + vga-connector { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_dac_out>; + }; + }; + }; + + vga-dac { + compatible = "dumb-vga-dac"; + vdd-supply = <®_vga_3v3>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + vga_dac_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_vga>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + vga_dac_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + reg_vga_3v3: vga_3v3_regulator { + compatible = "regulator-fixed"; + regulator-name = "vga-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */ + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */ }; }; +&codec { + allwinner,audio-routing = + "Headphone", "HP", + "Speaker", "LINEOUT", + "LINEIN", "Line In", + "MIC1", "Mic", + "MIC2", "Headset Mic", + "Mic", "MBIAS", + "Headset Mic", "HBIAS"; + allwinner,pa-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc3>; }; @@ -245,6 +312,19 @@ status = "okay"; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd0_rgb888_pins>; + status = "okay"; +}; + +&tcon0_out { + tcon0_out_vga: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_dac_in>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/dts/src/arm/sun6i-a31.dtsi b/dts/src/arm/sun6i-a31.dtsi index ce1960453a..2b26175d55 100644 --- a/dts/src/arm/sun6i-a31.dtsi +++ b/dts/src/arm/sun6i-a31.dtsi @@ -231,6 +231,11 @@ }; }; + de: display-engine { + compatible = "allwinner,sun6i-a31-display-engine"; + allwinner,pipelines = <&fe0>; + }; + soc@01c00000 { compatible = "simple-bus"; #address-cells = <1>; @@ -246,6 +251,44 @@ #dma-cells = <1>; }; + tcon0: lcd-controller@01c0c000 { + compatible = "allwinner,sun6i-a31-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ccu RST_AHB1_LCD0>; + reset-names = "lcd"; + clocks = <&ccu CLK_AHB1_LCD0>, + <&ccu CLK_LCD0_CH0>, + <&ccu CLK_LCD0_CH1>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon0-pixel-clock"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + mmc0: mmc@01c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; @@ -428,19 +471,55 @@ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_APB1_PIO>; + clocks = <&ccu CLK_APB1_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; #gpio-cells = <3>; - uart0_pins_a: uart0@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "uart0"; + gmac_pins_gmii_a: gmac_gmii@0 { + allwinner,pins = "PA0", "PA1", "PA2", "PA3", + "PA4", "PA5", "PA6", "PA7", + "PA8", "PA9", "PA10", "PA11", + "PA12", "PA13", "PA14", "PA15", + "PA16", "PA17", "PA18", "PA19", + "PA20", "PA21", "PA22", "PA23", + "PA24", "PA25", "PA26", "PA27"; + allwinner,function = "gmac"; + /* + * data lines in GMII mode run at 125MHz and + * might need a higher signal drive strength + */ + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + gmac_pins_mii_a: gmac_mii@0 { + allwinner,pins = "PA0", "PA1", "PA2", "PA3", + "PA8", "PA9", "PA11", + "PA12", "PA13", "PA14", "PA19", + "PA20", "PA21", "PA22", "PA23", + "PA24", "PA26", "PA27"; + allwinner,function = "gmac"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + gmac_pins_rgmii_a: gmac_rgmii@0 { + allwinner,pins = "PA0", "PA1", "PA2", "PA3", + "PA9", "PA10", "PA11", + "PA12", "PA13", "PA14", "PA19", + "PA20", "PA25", "PA26", "PA27"; + allwinner,function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + i2c0_pins_a: i2c0@0 { allwinner,pins = "PH14", "PH15"; allwinner,function = "i2c0"; @@ -462,6 +541,19 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + lcd0_rgb888_pins: lcd0_rgb888 { + allwinner,pins = "PD0", "PD1", "PD2", "PD3", + "PD4", "PD5", "PD6", "PD7", + "PD8", "PD9", "PD10", "PD11", + "PD12", "PD13", "PD14", "PD15", + "PD16", "PD17", "PD18", "PD19", + "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + allwinner,function = "lcd0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -506,47 +598,12 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - gmac_pins_mii_a: gmac_mii@0 { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", - "PA8", "PA9", "PA11", - "PA12", "PA13", "PA14", "PA19", - "PA20", "PA21", "PA22", "PA23", - "PA24", "PA26", "PA27"; - allwinner,function = "gmac"; + uart0_pins_a: uart0@0 { + allwinner,pins = "PH20", "PH21"; + allwinner,function = "uart0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - - gmac_pins_gmii_a: gmac_gmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", - "PA4", "PA5", "PA6", "PA7", - "PA8", "PA9", "PA10", "PA11", - "PA12", "PA13", "PA14", "PA15", - "PA16", "PA17", "PA18", "PA19", - "PA20", "PA21", "PA22", "PA23", - "PA24", "PA25", "PA26", "PA27"; - allwinner,function = "gmac"; - /* - * data lines in GMII mode run at 125MHz and - * might need a higher signal drive strength - */ - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - gmac_pins_rgmii_a: gmac_rgmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", "PA3", - "PA9", "PA10", "PA11", - "PA12", "PA13", "PA14", "PA19", - "PA20", "PA25", "PA26", "PA27"; - allwinner,function = "gmac"; - /* - * data lines in RGMII mode use DDR mode - * and need a higher signal drive strength - */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; }; timer@01c20c00 { @@ -728,6 +785,19 @@ reset-names = "ahb"; }; + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun6i-a31-codec"; + reg = <0x01c22c00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>; + clock-names = "apb", "codec"; + resets = <&ccu RST_APB1_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + timer@01c60000 { compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; @@ -799,6 +869,115 @@ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + fe0: display-frontend@01e00000 { + compatible = "allwinner,sun6i-a31-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_FE0>, <&ccu CLK_FE0>, + <&ccu CLK_DRAM_FE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_FE0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; + }; + + be0: display-backend@01e60000 { + compatible = "allwinner,sun6i-a31-display-backend"; + reg = <0x01e60000 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_BE0>, <&ccu CLK_BE0>, + <&ccu CLK_DRAM_BE0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_BE0>; + + assigned-clocks = <&ccu CLK_BE0>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_drc0: endpoint@0 { + reg = <0>; + remote-endpoint = <&drc0_in_be0>; + }; + }; + }; + }; + + drc0: drc@01e70000 { + compatible = "allwinner,sun6i-a31-drc"; + reg = <0x01e70000 0x10000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>, + <&ccu CLK_DRAM_DRC0>; + clock-names = "ahb", "mod", + "ram"; + resets = <&ccu RST_AHB1_DRC0>; + + assigned-clocks = <&ccu CLK_IEP_DRC0>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + drc0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + drc0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_drc0>; + }; + }; + + drc0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + drc0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_drc0>; + }; + }; + }; + }; + rtc: rtc@01f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; @@ -886,7 +1065,8 @@ reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>; + clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; diff --git a/dts/src/arm/sun6i-a31s-sina31s.dts b/dts/src/arm/sun6i-a31s-sina31s.dts index 6ead2f5c84..c35ec112f5 100644 --- a/dts/src/arm/sun6i-a31s-sina31s.dts +++ b/dts/src/arm/sun6i-a31s-sina31s.dts @@ -65,6 +65,14 @@ }; }; +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + &ehci0 { /* USB 2.0 4 port hub IC */ status = "okay"; diff --git a/dts/src/arm/sun6i-a31s.dtsi b/dts/src/arm/sun6i-a31s.dtsi index c17a32771b..97e2c51d0a 100644 --- a/dts/src/arm/sun6i-a31s.dtsi +++ b/dts/src/arm/sun6i-a31s.dtsi @@ -48,6 +48,14 @@ #include "sun6i-a31.dtsi" +&de { + compatible = "allwinner,sun6i-a31s-display-engine"; +}; + &pio { compatible = "allwinner,sun6i-a31s-pinctrl"; }; + +&tcon0 { + compatible = "allwinner,sun6i-a31s-tcon"; +}; diff --git a/dts/src/arm/sun7i-a20-bananapi-m1-plus.dts b/dts/src/arm/sun7i-a20-bananapi-m1-plus.dts index ba5bca0fe9..532f1a1605 100644 --- a/dts/src/arm/sun7i-a20-bananapi-m1-plus.dts +++ b/dts/src/arm/sun7i-a20-bananapi-m1-plus.dts @@ -105,6 +105,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; @@ -132,16 +136,14 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; +#include "axp209.dtsi" + &ir0 { pinctrl-names = "default"; pinctrl-0 = <&ir0_rx_pins_a>; @@ -167,7 +169,7 @@ mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; non-removable; - enable-sdio-wakeup; + wakeup-source; status = "okay"; brcmf: bcrmf@1 { @@ -192,6 +194,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { gmac_power_pin_bpi_m1p: gmac_power_pin@0 { allwinner,pins = "PH23"; @@ -222,8 +228,54 @@ }; }; +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + /* VBUS on usb host ports are tied to DC5V and therefore always on */ + status = "okay"; +}; diff --git a/dts/src/arm/sun7i-a20-olimex-som-evb.dts b/dts/src/arm/sun7i-a20-olimex-som-evb.dts index 23aacce4d6..134e0c1b12 100644 --- a/dts/src/arm/sun7i-a20-olimex-som-evb.dts +++ b/dts/src/arm/sun7i-a20-olimex-som-evb.dts @@ -88,6 +88,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &codec { status = "okay"; }; diff --git a/dts/src/arm/sun7i-a20.dtsi b/dts/src/arm/sun7i-a20.dtsi index 94cf5a1c71..f7db067b0d 100644 --- a/dts/src/arm/sun7i-a20.dtsi +++ b/dts/src/arm/sun7i-a20.dtsi @@ -1085,7 +1085,8 @@ compatible = "allwinner,sun7i-a20-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 5>; + clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; diff --git a/dts/src/arm/sun8i-a23-a33.dtsi b/dts/src/arm/sun8i-a23-a33.dtsi index 300a1bd5a6..e4991a78ad 100644 --- a/dts/src/arm/sun8i-a23-a33.dtsi +++ b/dts/src/arm/sun8i-a23-a33.dtsi @@ -266,7 +266,8 @@ /* compatible gets set in SoC specific dtsi file */ reg = <0x01c20800 0x400>; /* interrupts get set in SoC specific dtsi file */ - clocks = <&ccu CLK_BUS_PIO>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; @@ -575,7 +576,8 @@ compatible = "allwinner,sun8i-a23-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>; + clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; diff --git a/dts/src/arm/sun8i-a23-polaroid-mid2407pxe03.dts b/dts/src/arm/sun8i-a23-polaroid-mid2407pxe03.dts index a86cbedda3..21bb291b95 100644 --- a/dts/src/arm/sun8i-a23-polaroid-mid2407pxe03.dts +++ b/dts/src/arm/sun8i-a23-polaroid-mid2407pxe03.dts @@ -98,13 +98,6 @@ }; }; -®_ldo_io1 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-touchscreen"; - status = "okay"; -}; - &touchscreen { reg = <0x40>; compatible = "silead,gsl1680"; diff --git a/dts/src/arm/sun8i-a33-sinlinx-sina33.dts b/dts/src/arm/sun8i-a33-sinlinx-sina33.dts index fef6abc0a7..71bb9418c5 100644 --- a/dts/src/arm/sun8i-a33-sinlinx-sina33.dts +++ b/dts/src/arm/sun8i-a33-sinlinx-sina33.dts @@ -213,6 +213,11 @@ status = "okay"; }; +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + &usbphy { status = "okay"; usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */ diff --git a/dts/src/arm/sun8i-h3-nanopi-m1.dts b/dts/src/arm/sun8i-h3-nanopi-m1.dts new file mode 100644 index 0000000000..ec63d104b4 --- /dev/null +++ b/dts/src/arm/sun8i-h3-nanopi-m1.dts @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun8i-h3-nanopi.dtsi" + +/ { + model = "FriendlyArm NanoPi M1"; + compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; diff --git a/dts/src/arm/sun8i-h3-nanopi-neo.dts b/dts/src/arm/sun8i-h3-nanopi-neo.dts index 3d64cafc1e..8d2cc6e9a0 100644 --- a/dts/src/arm/sun8i-h3-nanopi-neo.dts +++ b/dts/src/arm/sun8i-h3-nanopi-neo.dts @@ -40,86 +40,9 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/dts-v1/; -#include "sun8i-h3.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sun8i-h3-nanopi.dtsi" / { model = "FriendlyARM NanoPi NEO"; compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>, <&leds_r_opc>; - - pwr { - label = "nanopi:green:pwr"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ - default-state = "on"; - }; - - status { - label = "nanopi:blue:status"; - gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ - }; - }; -}; - -&ehci3 { - status = "okay"; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; - status = "okay"; -}; - -&ohci3 { - status = "okay"; -}; - -&pio { - leds_opc: led-pins { - allwinner,pins = "PA10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -}; - -&r_pio { - leds_r_opc: led-pins { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usbphy { - /* USB VBUS is always on */ - status = "okay"; }; diff --git a/dts/src/arm/sun8i-h3-nanopi.dtsi b/dts/src/arm/sun8i-h3-nanopi.dtsi new file mode 100644 index 0000000000..8038aa29a5 --- /dev/null +++ b/dts/src/arm/sun8i-h3-nanopi.dtsi @@ -0,0 +1,144 @@ +/* + * Copyright (C) 2016 James Pettigrew <james@innovum.com.au> + * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_npi>, <&leds_r_npi>; + + status { + label = "nanopi:blue:status"; + gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + pwr { + label = "nanopi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + input-name = "k1"; + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_npi>; + + k1@0 { + label = "k1"; + linux,code = <KEY_POWER>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ehci3 { + status = "okay"; +}; + +&mmc0 { + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + status = "okay"; + vmmc-supply = <®_vcc3v3>; +}; + +&ohci3 { + status = "okay"; +}; + +&pio { + leds_npi: led_pins@0 { + allwinner,pins = "PA10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_pio { + leds_r_npi: led_pins@0 { + allwinner,pins = "PL10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + sw_r_npi: key_pins@0 { + allwinner,pins = "PL3"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/dts/src/arm/sun8i-h3.dtsi b/dts/src/arm/sun8i-h3.dtsi index f4ba088b22..6c14a6f728 100644 --- a/dts/src/arm/sun8i-h3.dtsi +++ b/dts/src/arm/sun8i-h3.dtsi @@ -321,7 +321,8 @@ reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; interrupt-controller; @@ -381,6 +382,20 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + spi0_pins: spi0 { + allwinner,pins = "PC0", "PC1", "PC2", "PC3"; + allwinner,function = "spi0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi1_pins: spi1 { + allwinner,pins = "PA15", "PA16", "PA14", "PA13"; + allwinner,function = "spi1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + uart0_pins_a: uart0@0 { allwinner,pins = "PA4", "PA5"; allwinner,function = "uart0"; @@ -425,6 +440,38 @@ clocks = <&osc24M>; }; + spi0: spi@01c68000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c68000 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@01c69000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c69000 0x1000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + dmas = <&dma 24>, <&dma 24>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + wdt0: watchdog@01c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; @@ -568,7 +615,8 @@ compatible = "allwinner,sun8i-h3-r-pinctrl"; reg = <0x01f02c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>; + clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; resets = <&apb0_reset 0>; gpio-controller; #gpio-cells = <3>; diff --git a/dts/src/arm/sun8i-reference-design-tablet.dtsi b/dts/src/arm/sun8i-reference-design-tablet.dtsi index 08cd001436..69bc0cd26c 100644 --- a/dts/src/arm/sun8i-reference-design-tablet.dtsi +++ b/dts/src/arm/sun8i-reference-design-tablet.dtsi @@ -209,6 +209,13 @@ status = "okay"; }; +®_ldo_io1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-touchscreen"; + status = "okay"; +}; + ®_rtc_ldo { regulator-name = "vcc-rtc"; }; diff --git a/dts/src/arm/sun9i-a80-cubieboard4.dts b/dts/src/arm/sun9i-a80-cubieboard4.dts index 439847acd4..67b02fe7f1 100644 --- a/dts/src/arm/sun9i-a80-cubieboard4.dts +++ b/dts/src/arm/sun9i-a80-cubieboard4.dts @@ -76,6 +76,14 @@ gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ }; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&ac100_rtc 1>; + clock-names = "ext_clock"; + /* enables internal regulator and de-asserts reset */ + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ + }; }; &mmc0 { @@ -88,6 +96,21 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_cubieboard4>; + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_cldo3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc1_pins { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; @@ -128,6 +151,15 @@ status = "okay"; }; +&r_pio { + wifi_en_pin_cubieboard4: wifi_en_pin@0 { + allwinner,pins = "PL2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + &r_rsb { status = "okay"; diff --git a/dts/src/arm/sun9i-a80-optimus.dts b/dts/src/arm/sun9i-a80-optimus.dts index ceb6ef15d6..7e036b2be7 100644 --- a/dts/src/arm/sun9i-a80-optimus.dts +++ b/dts/src/arm/sun9i-a80-optimus.dts @@ -105,6 +105,14 @@ enable-active-high; gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&ac100_rtc 1>; + clock-names = "ext_clock"; + /* enables internal regulator and de-asserts reset */ + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */ + }; }; &ehci0 { @@ -130,6 +138,21 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_optimus>; + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_cldo3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc1_pins { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; @@ -199,6 +222,13 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + wifi_en_pin_optimus: wifi_en_pin@0 { + allwinner,pins = "PL2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; &r_rsb { diff --git a/dts/src/arm/sun9i-a80.dtsi b/dts/src/arm/sun9i-a80.dtsi index 3c5214cbe4..979ad1aacf 100644 --- a/dts/src/arm/sun9i-a80.dtsi +++ b/dts/src/arm/sun9i-a80.dtsi @@ -678,7 +678,8 @@ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 5>; + clocks = <&apb0_gates 5>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; #interrupt-cells = <3>; @@ -700,6 +701,14 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + mmc1_pins: mmc1 { + allwinner,pins = "PG0", "PG1" ,"PG2", "PG3", + "PG4", "PG5"; + allwinner,function = "mmc1"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + mmc2_8bit_pins: mmc2_8bit { allwinner,pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", @@ -894,7 +903,8 @@ reg = <0x08002c00 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apbs_gates 0>; + clocks = <&apbs_gates 0>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; resets = <&apbs_rst 0>; gpio-controller; interrupt-controller; diff --git a/dts/src/arm/tegra124-apalis.dtsi b/dts/src/arm/tegra124-apalis.dtsi index e7a73db176..0819721dda 100644 --- a/dts/src/arm/tegra124-apalis.dtsi +++ b/dts/src/arm/tegra124-apalis.dtsi @@ -1595,7 +1595,7 @@ clock-frequency = <400000>; /* SGTL5000 audio codec */ - sgtl5000: codec@0a { + sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; VDDA-supply = <®_3v3>; diff --git a/dts/src/arm/tegra124-nyan.dtsi b/dts/src/arm/tegra124-nyan.dtsi index 271505e071..eabfa655a3 100644 --- a/dts/src/arm/tegra124-nyan.dtsi +++ b/dts/src/arm/tegra124-nyan.dtsi @@ -42,6 +42,12 @@ }; }; + gpu@0,57000000 { + status = "okay"; + + vdd-supply = <&vdd_gpu>; + }; + serial@70006000 { /* Debug connector on the bottom of the board near SD card. */ status = "okay"; @@ -214,7 +220,7 @@ regulator-always-on; }; - sd6 { + vdd_gpu: sd6 { regulator-name = "+VDD_GPU_AP"; regulator-min-microvolt = <650000>; regulator-max-microvolt = <1200000>; diff --git a/dts/src/arm/tegra20.dtsi b/dts/src/arm/tegra20.dtsi index 2207c08e3f..e8807503f8 100644 --- a/dts/src/arm/tegra20.dtsi +++ b/dts/src/arm/tegra20.dtsi @@ -376,6 +376,19 @@ status = "disabled"; }; + gmi@70009000 { + compatible = "nvidia,tegra20-gmi"; + reg = <0x70009000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xd0000000 0xfffffff>; + clocks = <&tegra_car TEGRA20_CLK_NOR>; + clock-names = "gmi"; + resets = <&tegra_car 42>; + reset-names = "gmi"; + status = "disabled"; + }; + pwm: pwm@7000a000 { compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; diff --git a/dts/src/arm/tegra30-apalis.dtsi b/dts/src/arm/tegra30-apalis.dtsi index 192b95177a..f6c7c3e958 100644 --- a/dts/src/arm/tegra30-apalis.dtsi +++ b/dts/src/arm/tegra30-apalis.dtsi @@ -48,6 +48,24 @@ pinctrl-0 = <&state_default>; state_default: pinmux { + /* Analogue Audio (On-module) */ + clk1_out_pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0", + "dap3_sclk_pp3", + "dap3_din_pp1", + "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* Apalis BKL1_ON */ pv2 { nvidia,pins = "pv2"; @@ -429,6 +447,15 @@ status = "okay"; clock-frequency = <100000>; + /* SGTL5000 audio codec */ + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <&sys_3v3_reg>; + VDDIO-supply = <&sys_3v3_reg>; + clocks = <&tegra_car TEGRA30_CLK_EXTERN1>; + }; + pmic: tps65911@2d { compatible = "ti,tps65911"; reg = <0x2d>; @@ -660,6 +687,12 @@ nvidia,sys-clock-req-active-high; }; + ahub@70080000 { + i2s@70080500 { + status = "okay"; + }; + }; + /* eMMC */ sdhci@78000600 { status = "okay"; @@ -733,4 +766,20 @@ regulator-always-on; }; }; + + sound { + compatible = "toradex,tegra-audio-sgtl5000-apalis_t30", + "nvidia,tegra-audio-sgtl5000"; + nvidia,model = "Toradex Apalis T30"; + nvidia,audio-routing = + "Headphone Jack", "HP_OUT", + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack"; + nvidia,i2s-controller = <&tegra_i2s2>; + nvidia,audio-codec = <&sgtl5000>; + clocks = <&tegra_car TEGRA30_CLK_PLL_A>, + <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; }; diff --git a/dts/src/arm/tegra30-colibri.dtsi b/dts/src/arm/tegra30-colibri.dtsi index a265534cd3..5360d638ee 100644 --- a/dts/src/arm/tegra30-colibri.dtsi +++ b/dts/src/arm/tegra30-colibri.dtsi @@ -29,6 +29,24 @@ pinctrl-0 = <&state_default>; state_default: pinmux { + /* Analogue Audio (On-module) */ + clk1_out_pw4 { + nvidia,pins = "clk1_out_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0", + "dap3_sclk_pp3", + "dap3_din_pp1", + "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + /* Colibri BL_ON */ pv2 { nvidia,pins = "pv2"; @@ -207,6 +225,15 @@ status = "okay"; clock-frequency = <100000>; + /* SGTL5000 audio codec */ + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <&sys_3v3_reg>; + VDDIO-supply = <&sys_3v3_reg>; + clocks = <&tegra_car TEGRA30_CLK_EXTERN1>; + }; + pmic: tps65911@2d { compatible = "ti,tps65911"; reg = <0x2d>; @@ -396,6 +423,12 @@ nvidia,sys-clock-req-active-high; }; + ahub@70080000 { + i2s@70080500 { + status = "okay"; + }; + }; + /* eMMC */ sdhci@78000600 { status = "okay"; @@ -471,4 +504,20 @@ regulator-always-on; }; }; + + sound { + compatible = "toradex,tegra-audio-sgtl5000-colibri_t30", + "nvidia,tegra-audio-sgtl5000"; + nvidia,model = "Toradex Colibri T30"; + nvidia,audio-routing = + "Headphone Jack", "HP_OUT", + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack"; + nvidia,i2s-controller = <&tegra_i2s2>; + nvidia,audio-codec = <&sgtl5000>; + clocks = <&tegra_car TEGRA30_CLK_PLL_A>, + <&tegra_car TEGRA30_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA30_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; }; diff --git a/dts/src/arm/tegra30.dtsi b/dts/src/arm/tegra30.dtsi index 5030065cbd..bbb1c002e7 100644 --- a/dts/src/arm/tegra30.dtsi +++ b/dts/src/arm/tegra30.dtsi @@ -439,6 +439,19 @@ status = "disabled"; }; + gmi@70009000 { + compatible = "nvidia,tegra30-gmi"; + reg = <0x70009000 0x1000>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x48000000 0x7ffffff>; + clocks = <&tegra_car TEGRA30_CLK_NOR>; + clock-names = "gmi"; + resets = <&tegra_car 42>; + reset-names = "gmi"; + status = "disabled"; + }; + pwm: pwm@7000a000 { compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; diff --git a/dts/src/arm/tps65217.dtsi b/dts/src/arm/tps65217.dtsi index a63272422d..02de56b558 100644 --- a/dts/src/arm/tps65217.dtsi +++ b/dts/src/arm/tps65217.dtsi @@ -13,6 +13,18 @@ &tps { compatible = "ti,tps65217"; + interrupt-controller; + #interrupt-cells = <1>; + + charger { + compatible = "ti,tps65217-charger"; + status = "disabled"; + }; + + pwrbutton { + compatible = "ti,tps65217-pwrbutton"; + status = "disabled"; + }; regulators { #address-cells = <1>; diff --git a/dts/src/arm/uniphier-common32.dtsi b/dts/src/arm/uniphier-common32.dtsi deleted file mode 100644 index 8c8a85176b..0000000000 --- a/dts/src/arm/uniphier-common32.dtsi +++ /dev/null @@ -1,199 +0,0 @@ -/* - * Device Tree Source commonly used by UniPhier ARM SoCs - * - * Copyright (C) 2015-2016 Socionext Inc. - * Author: Masahiro Yamada <yamada.masahiro@socionext.com> - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/include/ "skeleton.dtsi" - -/ { - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - clocks { - refclk: ref { - #clock-cells = <0>; - compatible = "fixed-clock"; - }; - }; - - soc: soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - interrupt-parent = <&intc>; - - serial0: serial@54006800 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006800 0x40>; - interrupts = <0 33 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; - clocks = <&peri_clk 0>; - }; - - serial1: serial@54006900 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006900 0x40>; - interrupts = <0 35 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; - clocks = <&peri_clk 1>; - }; - - serial2: serial@54006a00 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006a00 0x40>; - interrupts = <0 37 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - clocks = <&peri_clk 2>; - }; - - serial3: serial@54006b00 { - compatible = "socionext,uniphier-uart"; - status = "disabled"; - reg = <0x54006b00 0x40>; - interrupts = <0 177 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3>; - clocks = <&peri_clk 3>; - }; - - system_bus: system-bus@58c00000 { - compatible = "socionext,uniphier-system-bus"; - status = "disabled"; - reg = <0x58c00000 0x400>; - #address-cells = <2>; - #size-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_system_bus>; - }; - - smpctrl@59800000 { - compatible = "socionext,uniphier-smpctrl"; - reg = <0x59801000 0x400>; - }; - - mioctrl@59810000 { - compatible = "socionext,uniphier-mioctrl", - "simple-mfd", "syscon"; - reg = <0x59810000 0x800>; - - mio_clk: clock { - #clock-cells = <1>; - }; - - mio_rst: reset { - #reset-cells = <1>; - }; - }; - - perictrl@59820000 { - compatible = "socionext,uniphier-perictrl", - "simple-mfd", "syscon"; - reg = <0x59820000 0x200>; - - peri_clk: clock { - #clock-cells = <1>; - }; - - peri_rst: reset { - #reset-cells = <1>; - }; - }; - - timer@60000200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x60000200 0x20>; - interrupts = <1 11 0x104>; - clocks = <&arm_timer_clk>; - }; - - timer@60000600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x60000600 0x20>; - interrupts = <1 13 0x104>; - clocks = <&arm_timer_clk>; - }; - - intc: interrupt-controller@60001000 { - compatible = "arm,cortex-a9-gic"; - reg = <0x60001000 0x1000>, - <0x60000100 0x100>; - #interrupt-cells = <3>; - interrupt-controller; - }; - - soc-glue@5f800000 { - compatible = "socionext,uniphier-soc-glue", - "simple-mfd", "syscon"; - reg = <0x5f800000 0x2000>; - - pinctrl: pinctrl { - /* specify compatible in each SoC DTSI */ - }; - }; - - sysctrl@61840000 { - compatible = "socionext,uniphier-sysctrl", - "simple-mfd", "syscon"; - reg = <0x61840000 0x4000>; - - sys_clk: clock { - #clock-cells = <1>; - }; - - sys_rst: reset { - #reset-cells = <1>; - }; - }; - }; -}; - -/include/ "uniphier-pinctrl.dtsi" diff --git a/dts/src/arm/uniphier-ld4.dtsi b/dts/src/arm/uniphier-ld4.dtsi index 95f342c9d9..a7c494d7c4 100644 --- a/dts/src/arm/uniphier-ld4.dtsi +++ b/dts/src/arm/uniphier-ld4.dtsi @@ -43,7 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "uniphier-common32.dtsi" +/include/ "skeleton.dtsi" / { compatible = "socionext,uniphier-ld4"; @@ -61,147 +61,267 @@ }; }; + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + clocks { + refclk: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + arm_timer_clk: arm_timer_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; }; }; -}; - -&soc { - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>; - cache-unified; - cache-size = <(512 * 1024)>; - cache-sets = <256>; - cache-line-size = <128>; - cache-level = <2>; - }; - i2c0: i2c@58400000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58400000 0x40>; + soc { + compatible = "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 41 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&peri_clk 4>; - clock-frequency = <100000>; - }; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; - i2c1: i2c@58480000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58480000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 42 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&peri_clk 5>; - clock-frequency = <100000>; - }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(512 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; - /* chip-internal connection for DMD */ - i2c2: i2c@58500000 { - compatible = "socionext,uniphier-i2c"; - reg = <0x58500000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 43 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clocks = <&peri_clk 6>; - clock-frequency = <400000>; - }; + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&peri_clk 0>; + }; - i2c3: i2c@58580000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58580000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 44 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - clocks = <&peri_clk 7>; - clock-frequency = <100000>; - }; + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + interrupts = <0 35 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&peri_clk 1>; + }; - usb0: usb@5a800100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a800100 0x100>; - interrupts = <0 80 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0>; - clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; - resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>; - }; + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + interrupts = <0 37 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + clocks = <&peri_clk 2>; + }; - usb1: usb@5a810100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a810100 0x100>; - interrupts = <0 81 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb1>; - clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; - resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>; - }; + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + interrupts = <0 29 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + clocks = <&peri_clk 3>; + }; - usb2: usb@5a820100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a820100 0x100>; - interrupts = <0 82 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2>; - clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; - resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>; - }; + i2c0: i2c@58400000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58400000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&peri_clk 4>; + clock-frequency = <100000>; + }; -}; + i2c1: i2c@58480000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58480000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&peri_clk 5>; + clock-frequency = <100000>; + }; -&refclk { - clock-frequency = <24576000>; -}; + /* chip-internal connection for DMD */ + i2c2: i2c@58500000 { + compatible = "socionext,uniphier-i2c"; + reg = <0x58500000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&peri_clk 6>; + clock-frequency = <400000>; + }; -&serial3 { - interrupts = <0 29 4>; -}; + i2c3: i2c@58580000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58580000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&peri_clk 7>; + clock-frequency = <100000>; + }; -&mio_clk { - compatible = "socionext,uniphier-ld4-mio-clock"; -}; + system_bus: system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + status = "disabled"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_system_bus>; + }; -&mio_rst { - compatible = "socionext,uniphier-ld4-mio-reset"; - resets = <&sys_rst 7>; -}; + smpctrl@59800000 { + compatible = "socionext,uniphier-smpctrl"; + reg = <0x59801000 0x400>; + }; -&peri_clk { - compatible = "socionext,uniphier-ld4-peri-clock"; -}; + mioctrl@59810000 { + compatible = "socionext,uniphier-ld4-mioctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; -&peri_rst { - compatible = "socionext,uniphier-ld4-peri-reset"; -}; + mio_clk: clock { + compatible = "socionext,uniphier-ld4-mio-clock"; + #clock-cells = <1>; + }; -&pinctrl { - compatible = "socionext,uniphier-ld4-pinctrl"; -}; + mio_rst: reset { + compatible = "socionext,uniphier-ld4-mio-reset"; + #reset-cells = <1>; + }; + }; -&sys_clk { - compatible = "socionext,uniphier-ld4-clock"; -}; + perictrl@59820000 { + compatible = "socionext,uniphier-ld4-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + peri_clk: clock { + compatible = "socionext,uniphier-ld4-peri-clock"; + #clock-cells = <1>; + }; + + peri_rst: reset { + compatible = "socionext,uniphier-ld4-peri-reset"; + #reset-cells = <1>; + }; + }; + + usb0: usb@5a800100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + interrupts = <0 80 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, + <&mio_rst 12>; + }; + + usb1: usb@5a810100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + interrupts = <0 81 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, + <&mio_rst 13>; + }; -&sys_rst { - compatible = "socionext,uniphier-ld4-reset"; + usb2: usb@5a820100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + interrupts = <0 82 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2>; + clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, + <&mio_rst 14>; + }; + + soc-glue@5f800000 { + compatible = "socionext,uniphier-ld4-soc-glue", + "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + compatible = "socionext,uniphier-ld4-pinctrl"; + }; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x104>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x104>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + #interrupt-cells = <3>; + interrupt-controller; + }; + + sysctrl@61840000 { + compatible = "socionext,uniphier-ld4-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x10000>; + + sys_clk: clock { + compatible = "socionext,uniphier-ld4-clock"; + #clock-cells = <1>; + }; + + sys_rst: reset { + compatible = "socionext,uniphier-ld4-reset"; + #reset-cells = <1>; + }; + }; + }; }; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/dts/src/arm/uniphier-pro4.dtsi b/dts/src/arm/uniphier-pro4.dtsi index ba700267ad..e960b09ff0 100644 --- a/dts/src/arm/uniphier-pro4.dtsi +++ b/dts/src/arm/uniphier-pro4.dtsi @@ -43,7 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "uniphier-common32.dtsi" +/include/ "skeleton.dtsi" / { compatible = "socionext,uniphier-pro4"; @@ -69,155 +69,279 @@ }; }; + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + clocks { + refclk: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + arm_timer_clk: arm_timer_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; }; }; -}; -&soc { - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>; - cache-unified; - cache-size = <(768 * 1024)>; - cache-sets = <256>; - cache-line-size = <128>; - cache-level = <2>; - }; - - i2c0: i2c@58780000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58780000 0x80>; + soc { + compatible = "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 41 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&peri_clk 4>; - clock-frequency = <100000>; - }; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; - i2c1: i2c@58781000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58781000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 42 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&peri_clk 5>; - clock-frequency = <100000>; - }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(768 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; - i2c2: i2c@58782000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58782000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 43 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clocks = <&peri_clk 6>; - clock-frequency = <100000>; - }; + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&peri_clk 0>; + }; - i2c3: i2c@58783000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58783000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 44 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - clocks = <&peri_clk 7>; - clock-frequency = <100000>; - }; + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + interrupts = <0 35 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&peri_clk 1>; + }; - /* i2c4 does not exist */ + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + interrupts = <0 37 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + clocks = <&peri_clk 2>; + }; - /* chip-internal connection for DMD */ - i2c5: i2c@58785000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58785000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 25 4>; - clocks = <&peri_clk 9>; - clock-frequency = <400000>; - }; + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + interrupts = <0 177 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + clocks = <&peri_clk 3>; + }; - /* chip-internal connection for HDMI */ - i2c6: i2c@58786000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58786000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 26 4>; - clocks = <&peri_clk 10>; - clock-frequency = <400000>; - }; + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&peri_clk 4>; + clock-frequency = <100000>; + }; - usb2: usb@5a800100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a800100 0x100>; - interrupts = <0 80 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2>; - clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; - resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>; - }; + i2c1: i2c@58781000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58781000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&peri_clk 5>; + clock-frequency = <100000>; + }; - usb3: usb@5a810100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a810100 0x100>; - interrupts = <0 81 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb3>; - clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; - resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>; - }; -}; + i2c2: i2c@58782000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58782000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&peri_clk 6>; + clock-frequency = <100000>; + }; -&refclk { - clock-frequency = <25000000>; -}; + i2c3: i2c@58783000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58783000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&peri_clk 7>; + clock-frequency = <100000>; + }; -&mio_clk { - compatible = "socionext,uniphier-pro4-mio-clock"; -}; + /* i2c4 does not exist */ -&mio_rst { - compatible = "socionext,uniphier-pro4-mio-reset"; - resets = <&sys_rst 7>; -}; + /* chip-internal connection for DMD */ + i2c5: i2c@58785000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58785000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 25 4>; + clocks = <&peri_clk 9>; + clock-frequency = <400000>; + }; -&peri_clk { - compatible = "socionext,uniphier-pro4-peri-clock"; -}; + /* chip-internal connection for HDMI */ + i2c6: i2c@58786000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58786000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 26 4>; + clocks = <&peri_clk 10>; + clock-frequency = <400000>; + }; -&peri_rst { - compatible = "socionext,uniphier-pro4-peri-reset"; -}; + system_bus: system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + status = "disabled"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_system_bus>; + }; -&pinctrl { - compatible = "socionext,uniphier-pro4-pinctrl"; -}; + smpctrl@59800000 { + compatible = "socionext,uniphier-smpctrl"; + reg = <0x59801000 0x400>; + }; -&sys_clk { - compatible = "socionext,uniphier-pro4-clock"; -}; + mioctrl@59810000 { + compatible = "socionext,uniphier-pro4-mioctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; + + mio_clk: clock { + compatible = "socionext,uniphier-pro4-mio-clock"; + #clock-cells = <1>; + }; + + mio_rst: reset { + compatible = "socionext,uniphier-pro4-mio-reset"; + #reset-cells = <1>; + }; + }; + + perictrl@59820000 { + compatible = "socionext,uniphier-pro4-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + peri_clk: clock { + compatible = "socionext,uniphier-pro4-peri-clock"; + #clock-cells = <1>; + }; + + peri_rst: reset { + compatible = "socionext,uniphier-pro4-peri-reset"; + #reset-cells = <1>; + }; + }; -&sys_rst { - compatible = "socionext,uniphier-pro4-reset"; + usb2: usb@5a800100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + interrupts = <0 80 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2>; + clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, + <&mio_rst 12>; + }; + + usb3: usb@5a810100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + interrupts = <0 81 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3>; + clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, + <&mio_rst 13>; + }; + + soc-glue@5f800000 { + compatible = "socionext,uniphier-pro4-soc-glue", + "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + compatible = "socionext,uniphier-pro4-pinctrl"; + }; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x304>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x304>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + #interrupt-cells = <3>; + interrupt-controller; + }; + + sysctrl@61840000 { + compatible = "socionext,uniphier-pro4-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x10000>; + + sys_clk: clock { + compatible = "socionext,uniphier-pro4-clock"; + #clock-cells = <1>; + }; + + sys_rst: reset { + compatible = "socionext,uniphier-pro4-reset"; + #reset-cells = <1>; + }; + }; + }; }; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/dts/src/arm/uniphier-pro5.dtsi b/dts/src/arm/uniphier-pro5.dtsi index 5357ea9c14..dbc5e53331 100644 --- a/dts/src/arm/uniphier-pro5.dtsi +++ b/dts/src/arm/uniphier-pro5.dtsi @@ -43,7 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "uniphier-common32.dtsi" +/include/ "skeleton.dtsi" / { compatible = "socionext,uniphier-pro5"; @@ -56,157 +56,355 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clocks = <&sys_clk 32>; enable-method = "psci"; next-level-cache = <&l2>; + operating-points-v2 = <&cpu_opp>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clocks = <&sys_clk 32>; enable-method = "psci"; next-level-cache = <&l2>; + operating-points-v2 = <&cpu_opp>; }; }; + cpu_opp: opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + clock-latency-ns = <300>; + }; + opp@116667000 { + opp-hz = /bits/ 64 <116667000>; + clock-latency-ns = <300>; + }; + opp@150000000 { + opp-hz = /bits/ 64 <150000000>; + clock-latency-ns = <300>; + }; + opp@175000000 { + opp-hz = /bits/ 64 <175000000>; + clock-latency-ns = <300>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + clock-latency-ns = <300>; + }; + opp@233334000 { + opp-hz = /bits/ 64 <233334000>; + clock-latency-ns = <300>; + }; + opp@300000000 { + opp-hz = /bits/ 64 <300000000>; + clock-latency-ns = <300>; + }; + opp@350000000 { + opp-hz = /bits/ 64 <350000000>; + clock-latency-ns = <300>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + clock-latency-ns = <300>; + }; + opp@466667000 { + opp-hz = /bits/ 64 <466667000>; + clock-latency-ns = <300>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + clock-latency-ns = <300>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + clock-latency-ns = <300>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + clock-latency-ns = <300>; + }; + opp@933334000 { + opp-hz = /bits/ 64 <933334000>; + clock-latency-ns = <300>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + clock-latency-ns = <300>; + }; + opp@1400000000 { + opp-hz = /bits/ 64 <1400000000>; + clock-latency-ns = <300>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + clocks { + refclk: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <20000000>; + }; + arm_timer_clk: arm_timer_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; }; }; -}; -&soc { - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, <0x506c0000 0x400>; - interrupts = <0 190 4>, <0 191 4>; - cache-unified; - cache-size = <(2 * 1024 * 1024)>; - cache-sets = <512>; - cache-line-size = <128>; - cache-level = <2>; - next-level-cache = <&l3>; - }; + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; - l3: l3-cache@500c8000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, <0x506c8000 0x400>; - interrupts = <0 174 4>, <0 175 4>; - cache-unified; - cache-size = <(2 * 1024 * 1024)>; - cache-sets = <512>; - cache-line-size = <256>; - cache-level = <3>; - }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, + <0x506c0000 0x400>; + interrupts = <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <(2 * 1024 * 1024)>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + next-level-cache = <&l3>; + }; - i2c0: i2c@58780000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58780000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 41 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&peri_clk 4>; - clock-frequency = <100000>; - }; + l3: l3-cache@500c8000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, + <0x506c8000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(2 * 1024 * 1024)>; + cache-sets = <512>; + cache-line-size = <256>; + cache-level = <3>; + }; - i2c1: i2c@58781000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58781000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 42 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&peri_clk 5>; - clock-frequency = <100000>; - }; + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&peri_clk 0>; + }; - i2c2: i2c@58782000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58782000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 43 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clocks = <&peri_clk 6>; - clock-frequency = <100000>; - }; + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + interrupts = <0 35 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&peri_clk 1>; + }; - i2c3: i2c@58783000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58783000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 44 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - clocks = <&peri_clk 7>; - clock-frequency = <100000>; - }; + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + interrupts = <0 37 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + clocks = <&peri_clk 2>; + }; - /* i2c4 does not exist */ + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + interrupts = <0 177 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + clocks = <&peri_clk 3>; + }; - /* chip-internal connection for DMD */ - i2c5: i2c@58785000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58785000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 25 4>; - clocks = <&peri_clk 9>; - clock-frequency = <400000>; - }; + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&peri_clk 4>; + clock-frequency = <100000>; + }; - /* chip-internal connection for HDMI */ - i2c6: i2c@58786000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58786000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 26 4>; - clocks = <&peri_clk 10>; - clock-frequency = <400000>; - }; -}; + i2c1: i2c@58781000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58781000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&peri_clk 5>; + clock-frequency = <100000>; + }; -&refclk { - clock-frequency = <20000000>; -}; + i2c2: i2c@58782000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58782000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&peri_clk 6>; + clock-frequency = <100000>; + }; -&mio_clk { - compatible = "socionext,uniphier-pro5-sd-clock"; -}; + i2c3: i2c@58783000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58783000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&peri_clk 7>; + clock-frequency = <100000>; + }; -&mio_rst { - compatible = "socionext,uniphier-pro5-sd-reset"; -}; + /* i2c4 does not exist */ -&peri_clk { - compatible = "socionext,uniphier-pro5-peri-clock"; -}; + /* chip-internal connection for DMD */ + i2c5: i2c@58785000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58785000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 25 4>; + clocks = <&peri_clk 9>; + clock-frequency = <400000>; + }; -&peri_rst { - compatible = "socionext,uniphier-pro5-peri-reset"; -}; + /* chip-internal connection for HDMI */ + i2c6: i2c@58786000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58786000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 26 4>; + clocks = <&peri_clk 10>; + clock-frequency = <400000>; + }; -&pinctrl { - compatible = "socionext,uniphier-pro5-pinctrl"; -}; + system_bus: system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + status = "disabled"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_system_bus>; + }; -&sys_clk { - compatible = "socionext,uniphier-pro5-clock"; -}; + smpctrl@59800000 { + compatible = "socionext,uniphier-smpctrl"; + reg = <0x59801000 0x400>; + }; -&sys_rst { - compatible = "socionext,uniphier-pro5-reset"; + sdctrl@59810000 { + compatible = "socionext,uniphier-pro5-sdctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; + + sd_clk: clock { + compatible = "socionext,uniphier-pro5-sd-clock"; + #clock-cells = <1>; + }; + + sd_rst: reset { + compatible = "socionext,uniphier-pro5-sd-reset"; + #reset-cells = <1>; + }; + }; + + perictrl@59820000 { + compatible = "socionext,uniphier-pro5-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + peri_clk: clock { + compatible = "socionext,uniphier-pro5-peri-clock"; + #clock-cells = <1>; + }; + + peri_rst: reset { + compatible = "socionext,uniphier-pro5-peri-reset"; + #reset-cells = <1>; + }; + }; + + soc-glue@5f800000 { + compatible = "socionext,uniphier-pro5-soc-glue", + "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + compatible = "socionext,uniphier-pro5-pinctrl"; + }; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x304>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x304>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + #interrupt-cells = <3>; + interrupt-controller; + }; + + sysctrl@61840000 { + compatible = "socionext,uniphier-pro5-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x10000>; + + sys_clk: clock { + compatible = "socionext,uniphier-pro5-clock"; + #clock-cells = <1>; + }; + + sys_rst: reset { + compatible = "socionext,uniphier-pro5-reset"; + #reset-cells = <1>; + }; + }; + }; }; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/dts/src/arm/uniphier-pxs2.dtsi b/dts/src/arm/uniphier-pxs2.dtsi index 950f07ba03..e9e031d63c 100644 --- a/dts/src/arm/uniphier-pxs2.dtsi +++ b/dts/src/arm/uniphier-pxs2.dtsi @@ -43,7 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "uniphier-common32.dtsi" +/include/ "skeleton.dtsi" / { compatible = "socionext,uniphier-pxs2"; @@ -56,170 +56,339 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clocks = <&sys_clk 32>; enable-method = "psci"; next-level-cache = <&l2>; + operating-points-v2 = <&cpu_opp>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clocks = <&sys_clk 32>; enable-method = "psci"; next-level-cache = <&l2>; + operating-points-v2 = <&cpu_opp>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; + clocks = <&sys_clk 32>; enable-method = "psci"; next-level-cache = <&l2>; + operating-points-v2 = <&cpu_opp>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; + clocks = <&sys_clk 32>; enable-method = "psci"; next-level-cache = <&l2>; + operating-points-v2 = <&cpu_opp>; }; }; + cpu_opp: opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp@100000000 { + opp-hz = /bits/ 64 <100000000>; + clock-latency-ns = <300>; + }; + opp@150000000 { + opp-hz = /bits/ 64 <150000000>; + clock-latency-ns = <300>; + }; + opp@200000000 { + opp-hz = /bits/ 64 <200000000>; + clock-latency-ns = <300>; + }; + opp@300000000 { + opp-hz = /bits/ 64 <300000000>; + clock-latency-ns = <300>; + }; + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + clock-latency-ns = <300>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + clock-latency-ns = <300>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + clock-latency-ns = <300>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + clock-latency-ns = <300>; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + clocks { + refclk: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + arm_timer_clk: arm_timer_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; }; }; -}; - -&soc { - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>; - cache-unified; - cache-size = <(1280 * 1024)>; - cache-sets = <512>; - cache-line-size = <128>; - cache-level = <2>; - }; - i2c0: i2c@58780000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58780000 0x80>; + soc { + compatible = "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 41 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&peri_clk 4>; - clock-frequency = <100000>; - }; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; - i2c1: i2c@58781000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58781000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 42 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&peri_clk 5>; - clock-frequency = <100000>; - }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <(1280 * 1024)>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + }; - i2c2: i2c@58782000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58782000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - interrupts = <0 43 4>; - clocks = <&peri_clk 6>; - clock-frequency = <100000>; - }; + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&peri_clk 0>; + }; - i2c3: i2c@58783000 { - compatible = "socionext,uniphier-fi2c"; - status = "disabled"; - reg = <0x58783000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 44 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - clocks = <&peri_clk 7>; - clock-frequency = <100000>; - }; + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + interrupts = <0 35 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&peri_clk 1>; + }; - /* chip-internal connection for DMD */ - i2c4: i2c@58784000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58784000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 45 4>; - clocks = <&peri_clk 8>; - clock-frequency = <400000>; - }; + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + interrupts = <0 37 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + clocks = <&peri_clk 2>; + }; - /* chip-internal connection for STM */ - i2c5: i2c@58785000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58785000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 25 4>; - clocks = <&peri_clk 9>; - clock-frequency = <400000>; - }; + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + interrupts = <0 177 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + clocks = <&peri_clk 3>; + }; - /* chip-internal connection for HDMI */ - i2c6: i2c@58786000 { - compatible = "socionext,uniphier-fi2c"; - reg = <0x58786000 0x80>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 26 4>; - clocks = <&peri_clk 10>; - clock-frequency = <400000>; - }; -}; + i2c0: i2c@58780000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58780000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&peri_clk 4>; + clock-frequency = <100000>; + }; -&refclk { - clock-frequency = <25000000>; -}; + i2c1: i2c@58781000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58781000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&peri_clk 5>; + clock-frequency = <100000>; + }; -&mio_clk { - compatible = "socionext,uniphier-pxs2-sd-clock"; -}; + i2c2: i2c@58782000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58782000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&peri_clk 6>; + clock-frequency = <100000>; + }; -&mio_rst { - compatible = "socionext,uniphier-pxs2-sd-reset"; -}; + i2c3: i2c@58783000 { + compatible = "socionext,uniphier-fi2c"; + status = "disabled"; + reg = <0x58783000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&peri_clk 7>; + clock-frequency = <100000>; + }; -&peri_clk { - compatible = "socionext,uniphier-pxs2-peri-clock"; -}; + /* chip-internal connection for DMD */ + i2c4: i2c@58784000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58784000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 45 4>; + clocks = <&peri_clk 8>; + clock-frequency = <400000>; + }; -&peri_rst { - compatible = "socionext,uniphier-pxs2-peri-reset"; -}; + /* chip-internal connection for STM */ + i2c5: i2c@58785000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58785000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 25 4>; + clocks = <&peri_clk 9>; + clock-frequency = <400000>; + }; -&pinctrl { - compatible = "socionext,uniphier-pxs2-pinctrl"; -}; + /* chip-internal connection for HDMI */ + i2c6: i2c@58786000 { + compatible = "socionext,uniphier-fi2c"; + reg = <0x58786000 0x80>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 26 4>; + clocks = <&peri_clk 10>; + clock-frequency = <400000>; + }; -&sys_clk { - compatible = "socionext,uniphier-pxs2-clock"; -}; + system_bus: system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + status = "disabled"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_system_bus>; + }; + + smpctrl@59800000 { + compatible = "socionext,uniphier-smpctrl"; + reg = <0x59801000 0x400>; + }; + + sdctrl@59810000 { + compatible = "socionext,uniphier-pxs2-sdctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; -&sys_rst { - compatible = "socionext,uniphier-pxs2-reset"; + sd_clk: clock { + compatible = "socionext,uniphier-pxs2-sd-clock"; + #clock-cells = <1>; + }; + + sd_rst: reset { + compatible = "socionext,uniphier-pxs2-sd-reset"; + #reset-cells = <1>; + }; + }; + + perictrl@59820000 { + compatible = "socionext,uniphier-pxs2-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + peri_clk: clock { + compatible = "socionext,uniphier-pxs2-peri-clock"; + #clock-cells = <1>; + }; + + peri_rst: reset { + compatible = "socionext,uniphier-pxs2-peri-reset"; + #reset-cells = <1>; + }; + }; + + soc-glue@5f800000 { + compatible = "socionext,uniphier-pxs2-soc-glue", + "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + compatible = "socionext,uniphier-pxs2-pinctrl"; + }; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0xf04>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0xf04>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + #interrupt-cells = <3>; + interrupt-controller; + }; + + sysctrl@61840000 { + compatible = "socionext,uniphier-pxs2-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x10000>; + + sys_clk: clock { + compatible = "socionext,uniphier-pxs2-clock"; + #clock-cells = <1>; + }; + + sys_rst: reset { + compatible = "socionext,uniphier-pxs2-reset"; + #reset-cells = <1>; + }; + }; + }; }; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/dts/src/arm/uniphier-sld3.dtsi b/dts/src/arm/uniphier-sld3.dtsi index 5fa96c939b..9fad6bd2db 100644 --- a/dts/src/arm/uniphier-sld3.dtsi +++ b/dts/src/arm/uniphier-sld3.dtsi @@ -135,7 +135,6 @@ reg = <0x54006800 0x40>; interrupts = <0 33 4>; clocks = <&sys_clk 0>; - fifo-size = <64>; }; serial1: serial@54006900 { @@ -144,7 +143,6 @@ reg = <0x54006900 0x40>; interrupts = <0 35 4>; clocks = <&sys_clk 0>; - fifo-size = <64>; }; serial2: serial@54006a00 { @@ -153,7 +151,6 @@ reg = <0x54006a00 0x40>; interrupts = <0 37 4>; clocks = <&sys_clk 0>; - fifo-size = <64>; }; i2c0: i2c@58400000 { @@ -225,7 +222,7 @@ }; mioctrl@59810000 { - compatible = "socionext,uniphier-mioctrl", + compatible = "socionext,uniphier-sld3-mioctrl", "simple-mfd", "syscon"; reg = <0x59810000 0x800>; @@ -245,6 +242,9 @@ status = "disabled"; reg = <0x5a800100 0x100>; interrupts = <0 80 4>; + clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, + <&mio_rst 12>; }; usb1: usb@5a810100 { @@ -252,6 +252,9 @@ status = "disabled"; reg = <0x5a810100 0x100>; interrupts = <0 81 4>; + clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, + <&mio_rst 13>; }; usb2: usb@5a820100 { @@ -259,6 +262,9 @@ status = "disabled"; reg = <0x5a820100 0x100>; interrupts = <0 82 4>; + clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, + <&mio_rst 14>; }; usb3: usb@5a830100 { @@ -266,12 +272,15 @@ status = "disabled"; reg = <0x5a830100 0x100>; interrupts = <0 83 4>; + clocks = <&mio_clk 7>, <&mio_clk 11>, <&mio_clk 15>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 11>, + <&mio_rst 15>; }; sysctrl@f1840000 { - compatible = "socionext,uniphier-sysctrl", + compatible = "socionext,uniphier-sld3-sysctrl", "simple-mfd", "syscon"; - reg = <0xf1840000 0x4000>; + reg = <0xf1840000 0x10000>; sys_clk: clock { compatible = "socionext,uniphier-sld3-clock"; diff --git a/dts/src/arm/uniphier-sld8.dtsi b/dts/src/arm/uniphier-sld8.dtsi index d8cf0e7e11..b2c980ead7 100644 --- a/dts/src/arm/uniphier-sld8.dtsi +++ b/dts/src/arm/uniphier-sld8.dtsi @@ -43,7 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/include/ "uniphier-common32.dtsi" +/include/ "skeleton.dtsi" / { compatible = "socionext,uniphier-sld8"; @@ -61,146 +61,267 @@ }; }; + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + clocks { + refclk: ref { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + arm_timer_clk: arm_timer_clk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <50000000>; }; }; -}; - -&soc { - l2: l2-cache@500c0000 { - compatible = "socionext,uniphier-system-cache"; - reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, <0x506c0000 0x400>; - interrupts = <0 174 4>, <0 175 4>; - cache-unified; - cache-size = <(256 * 1024)>; - cache-sets = <256>; - cache-line-size = <128>; - cache-level = <2>; - }; - i2c0: i2c@58400000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58400000 0x40>; + soc { + compatible = "simple-bus"; #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 41 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c0>; - clocks = <&peri_clk 4>; - clock-frequency = <100000>; - }; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; - i2c1: i2c@58480000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58480000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 42 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1>; - clocks = <&peri_clk 5>; - clock-frequency = <100000>; - }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(256 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; - /* chip-internal connection for DMD */ - i2c2: i2c@58500000 { - compatible = "socionext,uniphier-i2c"; - reg = <0x58500000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 43 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clocks = <&peri_clk 6>; - clock-frequency = <400000>; - }; + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&peri_clk 0>; + }; - i2c3: i2c@58580000 { - compatible = "socionext,uniphier-i2c"; - status = "disabled"; - reg = <0x58580000 0x40>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <0 44 1>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - clocks = <&peri_clk 7>; - clock-frequency = <100000>; - }; + serial1: serial@54006900 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006900 0x40>; + interrupts = <0 35 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&peri_clk 1>; + }; - usb0: usb@5a800100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a800100 0x100>; - interrupts = <0 80 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb0>; - clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; - resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>; - }; + serial2: serial@54006a00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006a00 0x40>; + interrupts = <0 37 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + clocks = <&peri_clk 2>; + }; - usb1: usb@5a810100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a810100 0x100>; - interrupts = <0 81 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb1>; - clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; - resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>; - }; + serial3: serial@54006b00 { + compatible = "socionext,uniphier-uart"; + status = "disabled"; + reg = <0x54006b00 0x40>; + interrupts = <0 29 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + clocks = <&peri_clk 3>; + }; - usb2: usb@5a820100 { - compatible = "socionext,uniphier-ehci", "generic-ehci"; - status = "disabled"; - reg = <0x5a820100 0x100>; - interrupts = <0 82 4>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usb2>; - clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; - resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>; - }; -}; + i2c0: i2c@58400000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58400000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 41 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + clocks = <&peri_clk 4>; + clock-frequency = <100000>; + }; -&refclk { - clock-frequency = <25000000>; -}; + i2c1: i2c@58480000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58480000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 42 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clocks = <&peri_clk 5>; + clock-frequency = <100000>; + }; -&serial3 { - interrupts = <0 29 4>; -}; + /* chip-internal connection for DMD */ + i2c2: i2c@58500000 { + compatible = "socionext,uniphier-i2c"; + reg = <0x58500000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 43 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clocks = <&peri_clk 6>; + clock-frequency = <400000>; + }; -&mio_clk { - compatible = "socionext,uniphier-sld8-mio-clock"; -}; + i2c3: i2c@58580000 { + compatible = "socionext,uniphier-i2c"; + status = "disabled"; + reg = <0x58580000 0x40>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0 44 1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clocks = <&peri_clk 7>; + clock-frequency = <100000>; + }; -&mio_rst { - compatible = "socionext,uniphier-sld8-mio-reset"; - resets = <&sys_rst 7>; -}; + system_bus: system-bus@58c00000 { + compatible = "socionext,uniphier-system-bus"; + status = "disabled"; + reg = <0x58c00000 0x400>; + #address-cells = <2>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_system_bus>; + }; -&peri_clk { - compatible = "socionext,uniphier-sld8-peri-clock"; -}; + smpctrl@59800000 { + compatible = "socionext,uniphier-smpctrl"; + reg = <0x59801000 0x400>; + }; -&peri_rst { - compatible = "socionext,uniphier-sld8-peri-reset"; -}; + mioctrl@59810000 { + compatible = "socionext,uniphier-sld8-mioctrl", + "simple-mfd", "syscon"; + reg = <0x59810000 0x800>; -&pinctrl { - compatible = "socionext,uniphier-sld8-pinctrl"; -}; + mio_clk: clock { + compatible = "socionext,uniphier-sld8-mio-clock"; + #clock-cells = <1>; + }; -&sys_clk { - compatible = "socionext,uniphier-sld8-clock"; -}; + mio_rst: reset { + compatible = "socionext,uniphier-sld8-mio-reset"; + #reset-cells = <1>; + }; + }; + + perictrl@59820000 { + compatible = "socionext,uniphier-sld8-perictrl", + "simple-mfd", "syscon"; + reg = <0x59820000 0x200>; + + peri_clk: clock { + compatible = "socionext,uniphier-sld8-peri-clock"; + #clock-cells = <1>; + }; + + peri_rst: reset { + compatible = "socionext,uniphier-sld8-peri-reset"; + #reset-cells = <1>; + }; + }; + + usb0: usb@5a800100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a800100 0x100>; + interrupts = <0 80 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0>; + clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, + <&mio_rst 12>; + }; + + usb1: usb@5a810100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a810100 0x100>; + interrupts = <0 81 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1>; + clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, + <&mio_rst 13>; + }; + + usb2: usb@5a820100 { + compatible = "socionext,uniphier-ehci", "generic-ehci"; + status = "disabled"; + reg = <0x5a820100 0x100>; + interrupts = <0 82 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2>; + clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, + <&mio_rst 14>; + }; -&sys_rst { - compatible = "socionext,uniphier-sld8-reset"; + soc-glue@5f800000 { + compatible = "socionext,uniphier-sld8-soc-glue", + "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + compatible = "socionext,uniphier-sld8-pinctrl"; + }; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x104>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x104>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + #interrupt-cells = <3>; + interrupt-controller; + }; + + sysctrl@61840000 { + compatible = "socionext,uniphier-sld8-sysctrl", + "simple-mfd", "syscon"; + reg = <0x61840000 0x10000>; + + sys_clk: clock { + compatible = "socionext,uniphier-sld8-clock"; + #clock-cells = <1>; + }; + + sys_rst: reset { + compatible = "socionext,uniphier-sld8-reset"; + #reset-cells = <1>; + }; + }; + }; }; + +/include/ "uniphier-pinctrl.dtsi" diff --git a/dts/src/arm/vexpress-v2p-ca15_a7.dts b/dts/src/arm/vexpress-v2p-ca15_a7.dts index 0205c97efd..45d08cc37b 100644 --- a/dts/src/arm/vexpress-v2p-ca15_a7.dts +++ b/dts/src/arm/vexpress-v2p-ca15_a7.dts @@ -39,6 +39,7 @@ reg = <0>; cci-control-port = <&cci_control1>; cpu-idle-states = <&CLUSTER_SLEEP_BIG>; + capacity-dmips-mhz = <1024>; }; cpu1: cpu@1 { @@ -47,6 +48,7 @@ reg = <1>; cci-control-port = <&cci_control1>; cpu-idle-states = <&CLUSTER_SLEEP_BIG>; + capacity-dmips-mhz = <1024>; }; cpu2: cpu@2 { @@ -55,6 +57,7 @@ reg = <0x100>; cci-control-port = <&cci_control2>; cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; + capacity-dmips-mhz = <516>; }; cpu3: cpu@3 { @@ -63,6 +66,7 @@ reg = <0x101>; cci-control-port = <&cci_control2>; cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; + capacity-dmips-mhz = <516>; }; cpu4: cpu@4 { @@ -71,6 +75,7 @@ reg = <0x102>; cci-control-port = <&cci_control2>; cpu-idle-states = <&CLUSTER_SLEEP_LITTLE>; + capacity-dmips-mhz = <516>; }; idle-states { diff --git a/dts/src/arm/vf-colibri.dtsi b/dts/src/arm/vf-colibri.dtsi index b7417094dc..21bfef957b 100644 --- a/dts/src/arm/vf-colibri.dtsi +++ b/dts/src/arm/vf-colibri.dtsi @@ -108,6 +108,10 @@ status = "okay"; }; +&edma1 { + status = "okay"; +}; + &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; diff --git a/dts/src/arm/vf610-zii-dev-rev-b.dts b/dts/src/arm/vf610-zii-dev-rev-b.dts index 5c1fcab4a6..7ea617e47f 100644 --- a/dts/src/arm/vf610-zii-dev-rev-b.dts +++ b/dts/src/arm/vf610-zii-dev-rev-b.dts @@ -88,10 +88,16 @@ switch0: switch0@0 { compatible = "marvell,mv88e6085"; + pinctrl-0 = <&pinctrl_gpio_switch0>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; reg = <0>; dsa,member = <0 0>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; ports { #address-cells = <1>; @@ -99,16 +105,19 @@ port@0 { reg = <0>; label = "lan0"; + phy-handle = <&switch0phy0>; }; port@1 { reg = <1>; label = "lan1"; + phy-handle = <&switch0phy1>; }; port@2 { reg = <2>; label = "lan2"; + phy-handle = <&switch0phy2>; }; switch0port5: port@5 { @@ -133,6 +142,24 @@ }; }; }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch0phy0: switch0phy0@0 { + reg = <0>; + interrupt-parent = <&switch0>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + }; + switch0phy1: switch1phy0@1 { + reg = <1>; + interrupt-parent = <&switch0>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; + switch0phy2: switch1phy0@2 { + reg = <2>; + interrupt-parent = <&switch0>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + }; + }; }; }; @@ -143,10 +170,16 @@ switch1: switch1@0 { compatible = "marvell,mv88e6085"; + pinctrl-0 = <&pinctrl_gpio_switch1>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; reg = <0>; dsa,member = <0 1>; + interrupt-parent = <&gpio0>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; ports { #address-cells = <1>; @@ -196,12 +229,18 @@ #size-cells = <0>; switch1phy0: switch1phy0@0 { reg = <0>; + interrupt-parent = <&switch1>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; }; switch1phy1: switch1phy0@1 { reg = <1>; + interrupt-parent = <&switch1>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; }; switch1phy2: switch1phy0@2 { reg = <2>; + interrupt-parent = <&switch1>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; }; }; }; @@ -499,13 +538,6 @@ }; }; -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - status = "okay"; -}; - &uart0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; @@ -636,6 +668,18 @@ >; }; + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + fsl,pins = < + VF610_PAD_PTB5__GPIO_27 0x219d + >; + }; + + pinctrl_gpio_switch1: pinctrl-gpio-switch1 { + fsl,pins = < + VF610_PAD_PTB4__GPIO_26 0x219d + >; + }; + pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { fsl,pins = < VF610_PAD_PTE14__GPIO_119 0x31c2 @@ -663,13 +707,6 @@ >; }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - VF610_PAD_PTA30__I2C3_SCL 0x37ff - VF610_PAD_PTA31__I2C3_SDA 0x37ff - >; - }; - pinctrl_leds_debug: pinctrl-leds-debug { fsl,pins = < VF610_PAD_PTD20__GPIO_74 0x31c2 diff --git a/dts/src/arm/vfxxx.dtsi b/dts/src/arm/vfxxx.dtsi index 2c13ec696a..e9d28474c2 100644 --- a/dts/src/arm/vfxxx.dtsi +++ b/dts/src/arm/vfxxx.dtsi @@ -194,6 +194,9 @@ clocks = <&clks VF610_CLK_DSPI0>; clock-names = "dspi"; spi-num-chipselects = <6>; + dmas = <&edma1 1 12>, + <&edma1 1 13>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -206,6 +209,9 @@ clocks = <&clks VF610_CLK_DSPI1>; clock-names = "dspi"; spi-num-chipselects = <4>; + dmas = <&edma1 1 14>, + <&edma1 1 15>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -520,6 +526,12 @@ status = "disabled"; }; + ocotp: ocotp@400a5000 { + compatible = "fsl,vf610-ocotp"; + reg = <0x400a5000 0x1000>; + clocks = <&clks VF610_CLK_OCOTP>; + }; + snvs0: snvs@400a7000 { compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; reg = <0x400a7000 0x2000>; @@ -561,6 +573,9 @@ clocks = <&clks VF610_CLK_DSPI2>; clock-names = "dspi"; spi-num-chipselects = <2>; + dmas = <&edma1 0 10>, + <&edma1 0 11>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -573,6 +588,9 @@ clocks = <&clks VF610_CLK_DSPI3>; clock-names = "dspi"; spi-num-chipselects = <2>; + dmas = <&edma1 0 12>, + <&edma1 0 13>; + dma-names = "rx", "tx"; status = "disabled"; }; diff --git a/dts/src/arm/zynq-7000.dtsi b/dts/src/arm/zynq-7000.dtsi index f283ff0838..f3ac9bfe58 100644 --- a/dts/src/arm/zynq-7000.dtsi +++ b/dts/src/arm/zynq-7000.dtsi @@ -10,9 +10,10 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -/include/ "skeleton.dtsi" / { + #address-cells = <1>; + #size-cells = <1>; compatible = "xlnx,zynq-7000"; cpus { @@ -41,14 +42,15 @@ }; }; - pmu { + pmu@f8891000 { compatible = "arm,cortex-a9-pmu"; interrupts = <0 5 4>, <0 6 4>; interrupt-parent = <&intc>; - reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >; + reg = <0xf8891000 0x1000>, + <0xf8893000 0x1000>; }; - regulator_vccpint: fixedregulator@0 { + regulator_vccpint: fixedregulator { compatible = "regulator-fixed"; regulator-name = "VCCPINT"; regulator-min-microvolt = <1000000>; diff --git a/dts/src/arm/zynq-microzed.dts b/dts/src/arm/zynq-microzed.dts new file mode 100644 index 0000000000..b9376a4904 --- /dev/null +++ b/dts/src/arm/zynq-microzed.dts @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2011 - 2014 Xilinx + * Copyright (C) 2016 Jagan Teki <jteki@openedev.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Zynq MicroZED Development Board"; + compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000"; + + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&clkc { + ps-clk-frequency = <33333333>; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + + ethernet_phy: ethernet-phy@0 { + reg = <0>; + }; +}; + +&sdhci0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb0_default>; +}; + +&pinctrl0 { + pinctrl_usb0_default: usb0-default { + mux { + groups = "usb0_0_grp"; + function = "usb0"; + }; + + conf { + groups = "usb0_0_grp"; + slew-rate = <0>; + io-standard = <1>; + }; + + conf-rx { + pins = "MIO29", "MIO31", "MIO36"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34", + "MIO35", "MIO37", "MIO38", "MIO39"; + bias-disable; + }; + }; +}; diff --git a/dts/src/arm/zynq-parallella.dts b/dts/src/arm/zynq-parallella.dts index 307ed201d6..64a6390fc5 100644 --- a/dts/src/arm/zynq-parallella.dts +++ b/dts/src/arm/zynq-parallella.dts @@ -28,7 +28,7 @@ serial0 = &uart1; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x40000000>; }; diff --git a/dts/src/arm/zynq-zc702.dts b/dts/src/arm/zynq-zc702.dts index e96959b2e6..0cdad2cc8b 100644 --- a/dts/src/arm/zynq-zc702.dts +++ b/dts/src/arm/zynq-zc702.dts @@ -24,7 +24,7 @@ serial0 = &uart1; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x40000000>; }; diff --git a/dts/src/arm/zynq-zc706.dts b/dts/src/arm/zynq-zc706.dts index be6a986bbb..ad4bb06dba 100644 --- a/dts/src/arm/zynq-zc706.dts +++ b/dts/src/arm/zynq-zc706.dts @@ -24,7 +24,7 @@ serial0 = &uart1; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x40000000>; }; diff --git a/dts/src/arm/zynq-zed.dts b/dts/src/arm/zynq-zed.dts index 7250c1eac7..325379f798 100644 --- a/dts/src/arm/zynq-zed.dts +++ b/dts/src/arm/zynq-zed.dts @@ -23,7 +23,7 @@ serial0 = &uart1; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x20000000>; }; diff --git a/dts/src/arm/zynq-zybo.dts b/dts/src/arm/zynq-zybo.dts index d9e0f3e706..590ec24b87 100644 --- a/dts/src/arm/zynq-zybo.dts +++ b/dts/src/arm/zynq-zybo.dts @@ -23,7 +23,7 @@ serial0 = &uart1; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x20000000>; }; diff --git a/dts/src/arm64/allwinner/sun50i-a64-pine64-plus.dts b/dts/src/arm64/allwinner/sun50i-a64-pine64-plus.dts new file mode 100644 index 0000000000..790d14daaa --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-a64-pine64-plus.dts @@ -0,0 +1,50 @@ +/* + * Copyright (c) 2016 ARM Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun50i-a64-pine64.dts" + +/ { + model = "Pine64+"; + compatible = "pine64,pine64-plus", "allwinner,sun50i-a64"; + + /* TODO: Camera, Ethernet PHY, touchscreen, etc. */ +}; diff --git a/dts/src/arm64/allwinner/sun50i-a64-pine64.dts b/dts/src/arm64/allwinner/sun50i-a64-pine64.dts new file mode 100644 index 0000000000..47095909d9 --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-a64-pine64.dts @@ -0,0 +1,74 @@ +/* + * Copyright (c) 2016 ARM Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" + +/ { + model = "Pine64"; + compatible = "pine64,pine64", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c1_pins { + bias-pull-up; +}; diff --git a/dts/src/arm64/allwinner/sun50i-a64.dtsi b/dts/src/arm64/allwinner/sun50i-a64.dtsi new file mode 100644 index 0000000000..e0dcab8eb0 --- /dev/null +++ b/dts/src/arm64/allwinner/sun50i-a64.dtsi @@ -0,0 +1,261 @@ +/* + * Copyright (C) 2016 ARM Ltd. + * based on the Allwinner H3 dtsi: + * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <3>; + enable-method = "psci"; + }; + }; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ccu: clock@01c20000 { + compatible = "allwinner,sun50i-a64-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pio: pinctrl@1c20800 { + compatible = "allwinner,sun50i-a64-pinctrl"; + reg = <0x01c20800 0x400>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 58>; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + i2c1_pins: i2c1_pins { + pins = "PH2", "PH3"; + function = "i2c1"; + }; + + uart0_pins_a: uart0@0 { + pins = "PB8", "PB9"; + function = "uart0"; + }; + }; + + uart0: serial@1c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 67>; + resets = <&ccu 46>; + status = "disabled"; + }; + + uart1: serial@1c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 68>; + resets = <&ccu 47>; + status = "disabled"; + }; + + uart2: serial@1c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 69>; + resets = <&ccu 48>; + status = "disabled"; + }; + + uart3: serial@1c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 70>; + resets = <&ccu 49>; + status = "disabled"; + }; + + uart4: serial@1c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu 71>; + resets = <&ccu 50>; + status = "disabled"; + }; + + i2c0: i2c@1c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 63>; + resets = <&ccu 42>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@1c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 64>; + resets = <&ccu 43>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@1c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu 65>; + resets = <&ccu 44>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gic: interrupt-controller@1c81000 { + compatible = "arm,gic-400"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x2000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + rtc: rtc@1f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi b/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi new file mode 100644 index 0000000000..7a078bef04 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gx-p23x-q20x.dtsi @@ -0,0 +1,190 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* Common DTSI for same Amlogic Q200/Q201 and P230/P231 boards using either + * the pin-compatible S912 (GXM) or S905D (GXL) SoCs. + */ + +/ { + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; +}; + +/* This UART is brought out to the DB9 connector */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +ðmac { + status = "okay"; +}; diff --git a/dts/src/arm64/amlogic/meson-gx.dtsi b/dts/src/arm64/amlogic/meson-gx.dtsi new file mode 100644 index 0000000000..fc033c0d2a --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gx.dtsi @@ -0,0 +1,360 @@ +/* + * Copyright (c) 2016 Andreas Färber + * + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <0x2>; + #size-cells = <0x0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xtal: xtal-clk { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xtal"; + #clock-cells = <0>; + }; + + firmware { + sm: secure-monitor { + compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm"; + }; + }; + + efuse: efuse { + compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse"; + #address-cells = <1>; + #size-cells = <1>; + + sn: sn@14 { + reg = <0x14 0x10>; + }; + + eth_mac: eth_mac@34 { + reg = <0x34 0x10>; + }; + + bid: bid@46 { + reg = <0x46 0x30>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + cbus: cbus@c1100000 { + compatible = "simple-bus"; + reg = <0x0 0xc1100000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; + + reset: reset-controller@4404 { + compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset"; + reg = <0x0 0x04404 0x0 0x20>; + #reset-cells = <1>; + }; + + uart_A: serial@84c0 { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x84c0 0x0 0x14>; + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + uart_B: serial@84dc { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x84dc 0x0 0x14>; + interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + i2c_A: i2c@8500 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x08500 0x0 0x20>; + interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pwm_ab: pwm@8550 { + compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x08550 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_cd: pwm@8650 { + compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x08650 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + pwm_ef: pwm@86c0 { + compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x086c0 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + uart_C: serial@8700 { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x8700 0x0 0x14>; + interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + i2c_B: i2c@87c0 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x087c0 0x0 0x20>; + interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c_C: i2c@87e0 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x087e0 0x0 0x20>; + interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + watchdog@98d0 { + compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt"; + reg = <0x0 0x098d0 0x0 0x10>; + clocks = <&xtal>; + }; + }; + + gic: interrupt-controller@c4301000 { + compatible = "arm,gic-400"; + reg = <0x0 0xc4301000 0 0x1000>, + <0x0 0xc4302000 0 0x2000>, + <0x0 0xc4304000 0 0x2000>, + <0x0 0xc4306000 0 0x2000>; + interrupt-controller; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + #interrupt-cells = <3>; + #address-cells = <0>; + }; + + aobus: aobus@c8100000 { + compatible = "simple-bus"; + reg = <0x0 0xc8100000 0x0 0x100000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; + + uart_AO: serial@4c0 { + compatible = "amlogic,meson-uart"; + reg = <0x0 0x004c0 0x0 0x14>; + interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + status = "disabled"; + }; + + ir: ir@580 { + compatible = "amlogic,meson-gxbb-ir"; + reg = <0x0 0x00580 0x0 0x40>; + interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + }; + + periphs: periphs@c8834000 { + compatible = "simple-bus"; + reg = <0x0 0xc8834000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; + + rng { + compatible = "amlogic,meson-rng"; + reg = <0x0 0x0 0x0 0x4>; + }; + }; + + + hiubus: hiubus@c883c000 { + compatible = "simple-bus"; + reg = <0x0 0xc883c000 0x0 0x2000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; + + mailbox: mailbox@404 { + compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; + reg = <0 0x404 0 0x4c>; + interrupts = <0 208 IRQ_TYPE_EDGE_RISING>, + <0 209 IRQ_TYPE_EDGE_RISING>, + <0 210 IRQ_TYPE_EDGE_RISING>; + #mbox-cells = <1>; + }; + }; + + ethmac: ethernet@c9410000 { + compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; + reg = <0x0 0xc9410000 0x0 0x10000 + 0x0 0xc8834540 0x0 0x4>; + interrupts = <0 8 1>; + interrupt-names = "macirq"; + phy-mode = "rgmii"; + status = "disabled"; + }; + + apb: apb@d0000000 { + compatible = "simple-bus"; + reg = <0x0 0xd0000000 0x0 0x200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; + + sd_emmc_a: mmc@70000 { + compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; + reg = <0x0 0x70000 0x0 0x2000>; + interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + sd_emmc_b: mmc@72000 { + compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; + reg = <0x0 0x72000 0x0 0x2000>; + interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + + sd_emmc_c: mmc@74000 { + compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc"; + reg = <0x0 0x74000 0x0 0x2000>; + interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + }; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts b/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts new file mode 100644 index 0000000000..969682092e --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxbb-nexbox-a95x.dts @@ -0,0 +1,231 @@ +/* + * Copyright (c) 2016 Andreas Färber + * Copyright (c) 2016 BayLibre, Inc. + * Author: Neil Armstrong <narmstrong@kernel.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxbb.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "nexbox,a95x", "amlogic,meson-gxbb"; + model = "NEXBOX A95X"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + blue { + label = "a95x:system-status"; + gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>; + }; + }; + + vddio_card: gpio-regulator { + compatible = "regulator-gpio"; + + regulator-name = "VDDIO_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + + /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ + states = <1800000 0 + 3300000 1>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rmii_pins>; + pinctrl-names = "default"; + phy-mode = "rmii"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_card>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; diff --git a/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts b/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts index e6e3491d48..238fbeacd3 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts +++ b/dts/src/arm64/amlogic/meson-gxbb-odroidc2.dts @@ -64,6 +64,18 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + usb_otg_pwr: regulator-usb-pwrs { + compatible = "regulator-fixed"; + + regulator-name = "USB_OTG_PWR"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + leds { compatible = "gpio-leds"; blue { @@ -73,6 +85,56 @@ default-state = "off"; }; }; + + tflash_vdd: regulator-tflash_vdd { + /* + * signal name from schematics: TFLASH_VDD_EN + */ + compatible = "regulator-fixed"; + + regulator-name = "TFLASH_VDD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio_ao GPIOAO_12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + tf_io: gpio-regulator-tf_io { + compatible = "regulator-gpio"; + + regulator-name = "TF_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + /* + * signal name from schematics: TF_3V3N_1V8_EN + */ + gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + + states = <3300000 0 + 1800000 1>; + }; + + vcc1v8: regulator-vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc3v3: regulator-vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; }; &uart_AO { @@ -83,7 +145,7 @@ ðmac { status = "okay"; - pinctrl-0 = <ð_pins>; + pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; }; @@ -98,3 +160,58 @@ pinctrl-0 = <&i2c_a_pins>; pinctrl-names = "default"; }; + +&usb0_phy { + status = "okay"; + phy-supply = <&usb_otg_pwr>; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +/* SD */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&tflash_vdd>; + vqmmc-supply = <&tf_io>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc3v3>; + vqmmc-supply = <&vcc1v8>; +}; diff --git a/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi b/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi index 06a34dc600..203be28978 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb-p20x.dtsi @@ -70,6 +70,61 @@ gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vddio_card: gpio-regulator { + compatible = "regulator-gpio"; + + regulator-name = "VDDIO_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + + /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ + states = <1800000 0 + 3300000 1>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; }; /* This UART is brought out to the DB9 connector */ @@ -81,7 +136,7 @@ ðmac { status = "okay"; - pinctrl-0 = <ð_pins>; + pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; }; @@ -107,3 +162,75 @@ &usb1 { status = "okay"; }; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_card>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; diff --git a/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi b/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi index 73f1593701..e59ad30819 100644 --- a/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb-vega-s95.dtsi @@ -65,6 +65,39 @@ enable-active-high; }; + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_1v8: regulator-vcc_1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>, + <&gpio GPIOX_20 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; }; &uart_AO { @@ -82,7 +115,7 @@ ðmac { status = "okay"; - pinctrl-0 = <ð_pins>; + pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; }; @@ -102,3 +135,74 @@ &usb1 { status = "okay"; }; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins &sdio_irq_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vcc_3v3>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vmmcq-sumpply = <&vcc_1v8>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; diff --git a/dts/src/arm64/amlogic/meson-gxbb.dtsi b/dts/src/arm64/amlogic/meson-gxbb.dtsi index 610e0e1c3c..51edd5b5c4 100644 --- a/dts/src/arm64/amlogic/meson-gxbb.dtsi +++ b/dts/src/arm64/amlogic/meson-gxbb.dtsi @@ -40,9 +40,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "meson-gx.dtsi" #include <dt-bindings/gpio/meson-gxbb-gpio.h> #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> #include <dt-bindings/clock/gxbb-clkc.h> @@ -51,106 +49,30 @@ / { compatible = "amlogic,meson-gxbb"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - cpus { - #address-cells = <0x2>; - #size-cells = <0x0>; + scpi { + compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0"; + mboxes = <&mailbox 1 &mailbox 2>; + shmem = <&cpu_scp_lpri &cpu_scp_hpri>; - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; - reg = <0x0 0x0>; - enable-method = "psci"; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; - reg = <0x0 0x1>; - enable-method = "psci"; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; - reg = <0x0 0x2>; - enable-method = "psci"; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a53", "arm,armv8"; - reg = <0x0 0x3>; - enable-method = "psci"; - }; - }; - - arm-pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; + clocks { + compatible = "arm,scpi-clocks"; - psci { - compatible = "arm,psci-0.2"; - method = "smc"; - }; - - firmware { - sm: secure-monitor { - compatible = "amlogic,meson-gxbb-sm"; - }; - }; - - efuse: efuse { - compatible = "amlogic,meson-gxbb-efuse"; - #address-cells = <1>; - #size-cells = <1>; - - sn: sn@14 { - reg = <0x14 0x10>; - }; - - eth_mac: eth_mac@34 { - reg = <0x34 0x10>; + scpi_dvfs: scpi_clocks@0 { + compatible = "arm,scpi-dvfs-clocks"; + #clock-cells = <1>; + clock-indices = <0>; + clock-output-names = "vcpu"; + }; }; - bid: bid@46 { - reg = <0x46 0x30>; + scpi_sensors: sensors { + compatible = "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; }; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 - (GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>; - }; - - xtal: xtal-clk { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "xtal"; - #clock-cells = <0>; - }; - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - usb0_phy: phy@c0000000 { compatible = "amlogic,meson-gxbb-usb2-phy"; #phy-cells = <0>; @@ -165,505 +87,422 @@ compatible = "amlogic,meson-gxbb-usb2-phy"; #phy-cells = <0>; reg = <0x0 0xc0000020 0x0 0x20>; + resets = <&reset RESET_USB_OTG>; clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>; clock-names = "usb_general", "usb"; status = "disabled"; }; - cbus: cbus@c1100000 { - compatible = "simple-bus"; - reg = <0x0 0xc1100000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; + sram: sram@c8000000 { + compatible = "amlogic,meson-gxbb-sram", "mmio-sram"; + reg = <0x0 0xc8000000 0x0 0x14000>; - reset: reset-controller@4404 { - compatible = "amlogic,meson-gxbb-reset"; - reg = <0x0 0x04404 0x0 0x20>; - #reset-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0xc8000000 0x14000>; + + cpu_scp_lpri: scp-shmem@0 { + compatible = "amlogic,meson-gxbb-scp-shmem"; + reg = <0x13000 0x400>; + }; + + cpu_scp_hpri: scp-shmem@200 { + compatible = "amlogic,meson-gxbb-scp-shmem"; + reg = <0x13400 0x400>; }; + }; + + usb0: usb@c9000000 { + compatible = "amlogic,meson-gxbb-usb", "snps,dwc2"; + reg = <0x0 0xc9000000 0x0 0x40000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB0_DDR_BRIDGE>; + clock-names = "otg"; + phys = <&usb0_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + status = "disabled"; + }; + + usb1: usb@c9100000 { + compatible = "amlogic,meson-gxbb-usb", "snps,dwc2"; + reg = <0x0 0xc9100000 0x0 0x40000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; + clock-names = "otg"; + phys = <&usb1_phy>; + phy-names = "usb2-phy"; + dr_mode = "host"; + status = "disabled"; + }; + }; +}; + +&cpu0 { + clocks = <&scpi_dvfs 0>; +}; + +&cpu1 { + clocks = <&scpi_dvfs 0>; +}; + +&cpu2 { + clocks = <&scpi_dvfs 0>; +}; + +&cpu3 { + clocks = <&scpi_dvfs 0>; +}; + +&cbus { + spifc: spi@8c80 { + compatible = "amlogic,meson-gxbb-spifc"; + reg = <0x0 0x08c80 0x0 0x80>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_SPI>; + status = "disabled"; + }; +}; + +ðmac { + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; +}; + +&aobus { + pinctrl_aobus: pinctrl@14 { + compatible = "amlogic,meson-gxbb-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank@14 { + reg = <0x0 0x00014 0x0 0x8>, + <0x0 0x0002c 0x0 0x4>, + <0x0 0x00024 0x0 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; - uart_A: serial@84c0 { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x84c0 0x0 0x14>; - interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; - status = "disabled"; + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; }; + }; - uart_B: serial@84dc { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x84dc 0x0 0x14>; - interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; - status = "disabled"; + remote_input_ao_pins: remote_input_ao { + mux { + groups = "remote_input_ao"; + function = "remote_input_ao"; }; + }; - pwm_ab: pwm@8550 { - compatible = "amlogic,meson-gxbb-pwm"; - reg = <0x0 0x08550 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; + i2c_ao_pins: i2c_ao { + mux { + groups = "i2c_sck_ao", + "i2c_sda_ao"; + function = "i2c_ao"; }; + }; - pwm_cd: pwm@8650 { - compatible = "amlogic,meson-gxbb-pwm"; - reg = <0x0 0x08650 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; + pwm_ao_a_3_pins: pwm_ao_a_3 { + mux { + groups = "pwm_ao_a_3"; + function = "pwm_ao_a_3"; }; + }; - pwm_ef: pwm@86c0 { - compatible = "amlogic,meson-gxbb-pwm"; - reg = <0x0 0x086c0 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; + pwm_ao_a_6_pins: pwm_ao_a_6 { + mux { + groups = "pwm_ao_a_6"; + function = "pwm_ao_a_6"; }; + }; - uart_C: serial@8700 { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x8700 0x0 0x14>; - interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; - status = "disabled"; + pwm_ao_a_12_pins: pwm_ao_a_12 { + mux { + groups = "pwm_ao_a_12"; + function = "pwm_ao_a_12"; }; + }; - watchdog@98d0 { - compatible = "amlogic,meson-gxbb-wdt"; - reg = <0x0 0x098d0 0x0 0x10>; - clocks = <&xtal>; + pwm_ao_b_pins: pwm_ao_b { + mux { + groups = "pwm_ao_b"; + function = "pwm_ao_b"; }; + }; + }; + + clkc_AO: clock-controller@040 { + compatible = "amlogic,gxbb-aoclkc"; + reg = <0x0 0x00040 0x0 0x4>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pwm_ab_AO: pwm@550 { + compatible = "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x0550 0x0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + + i2c_AO: i2c@500 { + compatible = "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x500 0x0 0x20>; + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_AO_I2C>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; +}; + +&periphs { + pinctrl_periphs: pinctrl@4b0 { + compatible = "amlogic,meson-gxbb-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@4b0 { + reg = <0x0 0x004b0 0x0 0x28>, + <0x0 0x004e8 0x0 0x14>, + <0x0 0x00120 0x0 0x14>, + <0x0 0x00430 0x0 0x40>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; - spifc: spi@8c80 { - compatible = "amlogic,meson-gxbb-spifc"; - reg = <0x0 0x08c80 0x0 0x80>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_SPI>; - status = "disabled"; + emmc_pins: emmc { + mux { + groups = "emmc_nand_d07", + "emmc_cmd", + "emmc_clk", + "emmc_ds"; + function = "emmc"; }; + }; - i2c_A: i2c@8500 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x08500 0x0 0x20>; - interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + nor_pins: nor { + mux { + groups = "nor_d", + "nor_q", + "nor_c", + "nor_cs"; + function = "nor"; }; + }; - i2c_B: i2c@87c0 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x087c0 0x0 0x20>; - interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + sdcard_pins: sdcard { + mux { + groups = "sdcard_d0", + "sdcard_d1", + "sdcard_d2", + "sdcard_d3", + "sdcard_cmd", + "sdcard_clk"; + function = "sdcard"; }; + }; - i2c_C: i2c@87e0 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x087e0 0x0 0x20>; - interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_cmd", + "sdio_clk"; + function = "sdio"; }; }; - gic: interrupt-controller@c4301000 { - compatible = "arm,gic-400"; - reg = <0x0 0xc4301000 0 0x1000>, - <0x0 0xc4302000 0 0x2000>, - <0x0 0xc4304000 0 0x2000>, - <0x0 0xc4306000 0 0x2000>; - interrupt-controller; - interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; - #interrupt-cells = <3>; - #address-cells = <0>; - }; - - aobus: aobus@c8100000 { - compatible = "simple-bus"; - reg = <0x0 0xc8100000 0x0 0x100000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; - - pinctrl_aobus: pinctrl@14 { - compatible = "amlogic,meson-gxbb-aobus-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio_ao: bank@14 { - reg = <0x0 0x00014 0x0 0x8>, - <0x0 0x0002c 0x0 0x4>, - <0x0 0x00024 0x0 0x8>; - reg-names = "mux", "pull", "gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - uart_ao_a_pins: uart_ao_a { - mux { - groups = "uart_tx_ao_a", "uart_rx_ao_a"; - function = "uart_ao"; - }; - }; - - remote_input_ao_pins: remote_input_ao { - mux { - groups = "remote_input_ao"; - function = "remote_input_ao"; - }; - }; - - i2c_ao_pins: i2c_ao { - mux { - groups = "i2c_sck_ao", - "i2c_sda_ao"; - function = "i2c_ao"; - }; - }; - - pwm_ao_a_3_pins: pwm_ao_a_3 { - mux { - groups = "pwm_ao_a_3"; - function = "pwm_ao_a_3"; - }; - }; - - pwm_ao_a_6_pins: pwm_ao_a_6 { - mux { - groups = "pwm_ao_a_6"; - function = "pwm_ao_a_6"; - }; - }; - - pwm_ao_a_12_pins: pwm_ao_a_12 { - mux { - groups = "pwm_ao_a_12"; - function = "pwm_ao_a_12"; - }; - }; - - pwm_ao_b_pins: pwm_ao_b { - mux { - groups = "pwm_ao_b"; - function = "pwm_ao_b"; - }; - }; + sdio_irq_pins: sdio_irq { + mux { + groups = "sdio_irq"; + function = "sdio"; }; + }; - clkc_AO: clock-controller@040 { - compatible = "amlogic,gxbb-aoclkc"; - reg = <0x0 0x00040 0x0 0x4>; - #clock-cells = <1>; - #reset-cells = <1>; + uart_a_pins: uart_a { + mux { + groups = "uart_tx_a", + "uart_rx_a"; + function = "uart_a"; }; + }; - uart_AO: serial@4c0 { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x004c0 0x0 0x14>; - interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>; - clocks = <&xtal>; - status = "disabled"; + uart_b_pins: uart_b { + mux { + groups = "uart_tx_b", + "uart_rx_b"; + function = "uart_b"; }; + }; - ir: ir@580 { - compatible = "amlogic,meson-gxbb-ir"; - reg = <0x0 0x00580 0x0 0x40>; - interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; - status = "disabled"; + uart_c_pins: uart_c { + mux { + groups = "uart_tx_c", + "uart_rx_c"; + function = "uart_c"; }; + }; - pwm_ab_AO: pwm@550 { - compatible = "amlogic,meson-gxbb-pwm"; - reg = <0x0 0x0550 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; + i2c_a_pins: i2c_a { + mux { + groups = "i2c_sck_a", + "i2c_sda_a"; + function = "i2c_a"; }; + }; - i2c_AO: i2c@500 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x500 0x0 0x20>; - interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_AO_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + i2c_b_pins: i2c_b { + mux { + groups = "i2c_sck_b", + "i2c_sda_b"; + function = "i2c_b"; }; }; - periphs: periphs@c8834000 { - compatible = "simple-bus"; - reg = <0x0 0xc8834000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>; + i2c_c_pins: i2c_c { + mux { + groups = "i2c_sck_c", + "i2c_sda_c"; + function = "i2c_c"; + }; + }; - rng { - compatible = "amlogic,meson-rng"; - reg = <0x0 0x0 0x0 0x4>; + eth_rgmii_pins: eth-rgmii { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_clk_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_rxd2", + "eth_rxd3", + "eth_rgmii_tx_clk", + "eth_tx_en", + "eth_txd0", + "eth_txd1", + "eth_txd2", + "eth_txd3"; + function = "eth"; }; + }; - pinctrl_periphs: pinctrl@4b0 { - compatible = "amlogic,meson-gxbb-periphs-pinctrl"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - gpio: bank@4b0 { - reg = <0x0 0x004b0 0x0 0x28>, - <0x0 0x004e8 0x0 0x14>, - <0x0 0x00120 0x0 0x14>, - <0x0 0x00430 0x0 0x40>; - reg-names = "mux", "pull", "pull-enable", "gpio"; - gpio-controller; - #gpio-cells = <2>; - }; - - emmc_pins: emmc { - mux { - groups = "emmc_nand_d07", - "emmc_cmd", - "emmc_clk"; - function = "emmc"; - }; - }; - - nor_pins: nor { - mux { - groups = "nor_d", - "nor_q", - "nor_c", - "nor_cs"; - function = "nor"; - }; - }; - - sdcard_pins: sdcard { - mux { - groups = "sdcard_d0", - "sdcard_d1", - "sdcard_d2", - "sdcard_d3", - "sdcard_cmd", - "sdcard_clk"; - function = "sdcard"; - }; - }; - - sdio_pins: sdio { - mux { - groups = "sdio_d0", - "sdio_d1", - "sdio_d2", - "sdio_d3", - "sdio_cmd", - "sdio_clk"; - function = "sdio"; - }; - }; - - sdio_irq_pins: sdio_irq { - mux { - groups = "sdio_irq"; - function = "sdio"; - }; - }; - - uart_a_pins: uart_a { - mux { - groups = "uart_tx_a", - "uart_rx_a"; - function = "uart_a"; - }; - }; - - uart_b_pins: uart_b { - mux { - groups = "uart_tx_b", - "uart_rx_b"; - function = "uart_b"; - }; - }; - - uart_c_pins: uart_c { - mux { - groups = "uart_tx_c", - "uart_rx_c"; - function = "uart_c"; - }; - }; - - i2c_a_pins: i2c_a { - mux { - groups = "i2c_sck_a", - "i2c_sda_a"; - function = "i2c_a"; - }; - }; - - i2c_b_pins: i2c_b { - mux { - groups = "i2c_sck_b", - "i2c_sda_b"; - function = "i2c_b"; - }; - }; - - i2c_c_pins: i2c_c { - mux { - groups = "i2c_sck_c", - "i2c_sda_c"; - function = "i2c_c"; - }; - }; - - eth_pins: eth_c { - mux { - groups = "eth_mdio", - "eth_mdc", - "eth_clk_rx_clk", - "eth_rx_dv", - "eth_rxd0", - "eth_rxd1", - "eth_rxd2", - "eth_rxd3", - "eth_rgmii_tx_clk", - "eth_tx_en", - "eth_txd0", - "eth_txd1", - "eth_txd2", - "eth_txd3"; - function = "eth"; - }; - }; - - pwm_a_x_pins: pwm_a_x { - mux { - groups = "pwm_a_x"; - function = "pwm_a_x"; - }; - }; - - pwm_a_y_pins: pwm_a_y { - mux { - groups = "pwm_a_y"; - function = "pwm_a_y"; - }; - }; - - pwm_b_pins: pwm_b { - mux { - groups = "pwm_b"; - function = "pwm_b"; - }; - }; - - pwm_d_pins: pwm_d { - mux { - groups = "pwm_d"; - function = "pwm_d"; - }; - }; - - pwm_e_pins: pwm_e { - mux { - groups = "pwm_e"; - function = "pwm_e"; - }; - }; - - pwm_f_x_pins: pwm_f_x { - mux { - groups = "pwm_f_x"; - function = "pwm_f_x"; - }; - }; - - pwm_f_y_pins: pwm_f_y { - mux { - groups = "pwm_f_y"; - function = "pwm_f_y"; - }; - }; + eth_rmii_pins: eth-rmii { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_clk_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_tx_en", + "eth_txd0", + "eth_txd1"; + function = "eth"; }; }; - hiubus: hiubus@c883c000 { - compatible = "simple-bus"; - reg = <0x0 0xc883c000 0x0 0x2000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; + pwm_a_x_pins: pwm_a_x { + mux { + groups = "pwm_a_x"; + function = "pwm_a_x"; + }; + }; - clkc: clock-controller@0 { - compatible = "amlogic,gxbb-clkc"; - #clock-cells = <1>; - reg = <0x0 0x0 0x0 0x3db>; + pwm_a_y_pins: pwm_a_y { + mux { + groups = "pwm_a_y"; + function = "pwm_a_y"; }; + }; - mailbox: mailbox@404 { - compatible = "amlogic,meson-gxbb-mhu"; - reg = <0 0x404 0 0x4c>; - interrupts = <0 208 IRQ_TYPE_EDGE_RISING>, - <0 209 IRQ_TYPE_EDGE_RISING>, - <0 210 IRQ_TYPE_EDGE_RISING>; - #mbox-cells = <1>; + pwm_b_pins: pwm_b { + mux { + groups = "pwm_b"; + function = "pwm_b"; }; }; - apb: apb@d0000000 { - compatible = "simple-bus"; - reg = <0x0 0xd0000000 0x0 0x200000>; - #address-cells = <2>; - #size-cells = <2>; - ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>; + pwm_d_pins: pwm_d { + mux { + groups = "pwm_d"; + function = "pwm_d"; + }; }; - usb0: usb@c9000000 { - compatible = "amlogic,meson-gxbb-usb", "snps,dwc2"; - reg = <0x0 0xc9000000 0x0 0x40000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_USB0_DDR_BRIDGE>; - clock-names = "otg"; - phys = <&usb0_phy>; - phy-names = "usb2-phy"; - dr_mode = "host"; - status = "disabled"; + pwm_e_pins: pwm_e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + }; }; - usb1: usb@c9100000 { - compatible = "amlogic,meson-gxbb-usb", "snps,dwc2"; - reg = <0x0 0xc9100000 0x0 0x40000>; - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clkc CLKID_USB1_DDR_BRIDGE>; - clock-names = "otg"; - phys = <&usb1_phy>; - phy-names = "usb2-phy"; - dr_mode = "host"; - status = "disabled"; + pwm_f_x_pins: pwm_f_x { + mux { + groups = "pwm_f_x"; + function = "pwm_f_x"; + }; }; - ethmac: ethernet@c9410000 { - compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac"; - reg = <0x0 0xc9410000 0x0 0x10000 - 0x0 0xc8834540 0x0 0x4>; - interrupts = <0 8 1>; - interrupt-names = "macirq"; - clocks = <&clkc CLKID_ETH>, - <&clkc CLKID_FCLK_DIV2>, - <&clkc CLKID_MPLL2>; - clock-names = "stmmaceth", "clkin0", "clkin1"; - phy-mode = "rgmii"; - status = "disabled"; + pwm_f_y_pins: pwm_f_y { + mux { + groups = "pwm_f_y"; + function = "pwm_f_y"; + }; }; }; }; + +&hiubus { + clkc: clock-controller@0 { + compatible = "amlogic,gxbb-clkc"; + #clock-cells = <1>; + reg = <0x0 0x0 0x0 0x3db>; + }; +}; + +&i2c_A { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_B { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_C { + clocks = <&clkc CLKID_I2C>; +}; + +&sd_emmc_a { + clocks = <&clkc CLKID_SD_EMMC_A>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; + +&sd_emmc_b { + clocks = <&clkc CLKID_SD_EMMC_B>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; + +&sd_emmc_c { + clocks = <&clkc CLKID_SD_EMMC_C>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; diff --git a/dts/src/arm64/amlogic/meson-gxl-nexbox-a95x.dts b/dts/src/arm64/amlogic/meson-gxl-nexbox-a95x.dts new file mode 100644 index 0000000000..e99101ae96 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxl-nexbox-a95x.dts @@ -0,0 +1,205 @@ +/* + * Copyright (c) 2016 Andreas Färber + * Copyright (c) 2016 BayLibre, Inc. + * Author: Neil Armstrong <narmstrong@kernel.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxl-s905x.dtsi" + +/ { + compatible = "nexbox,a95x", "amlogic,s905x", "amlogic,meson-gxl"; + model = "NEXBOX A95X (S905X)"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vddio_card: gpio-regulator { + compatible = "regulator-gpio"; + + regulator-name = "VDDIO_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + + /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ + states = <1800000 0 + 3300000 1>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +ðmac { + status = "okay"; + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_card>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905d-p230.dts b/dts/src/arm64/amlogic/meson-gxl-s905d-p230.dts new file mode 100644 index 0000000000..f66939cacd --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxl-s905d-p230.dts @@ -0,0 +1,77 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxl-s905d.dtsi" +#include "meson-gx-p23x-q20x.dtsi" + +/ { + compatible = "amlogic,p230", "amlogic,s905d", "amlogic,meson-gxl"; + model = "Amlogic Meson GXL (S905D) P230 Development Board"; +}; + +/* P230 has exclusive choice between internal or external PHY */ +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + + /* Select external PHY by default */ + phy-handle = <&external_phy>; + + /* External PHY reset is shared with internal PHY Led signals */ + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + /* External PHY is in RGMII */ + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + max-speed = <1000>; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905d-p231.dts b/dts/src/arm64/amlogic/meson-gxl-s905d-p231.dts new file mode 100644 index 0000000000..95992cf1fe --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxl-s905d-p231.dts @@ -0,0 +1,58 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxl-s905d.dtsi" +#include "meson-gx-p23x-q20x.dtsi" + +/ { + compatible = "amlogic,p231", "amlogic,s905d", "amlogic,meson-gxl"; + model = "Amlogic Meson GXL (S905D) P231 Development Board"; +}; + +/* P231 has only internal PHY port */ +ðmac { + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905d.dtsi b/dts/src/arm64/amlogic/meson-gxl-s905d.dtsi new file mode 100644 index 0000000000..615308e555 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxl-s905d.dtsi @@ -0,0 +1,48 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "meson-gxl.dtsi" + +/ { + compatible = "amlogic,s905d", "amlogic,meson-gxl"; +}; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dts b/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dts new file mode 100644 index 0000000000..9639f012b0 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxl-s905x-p212.dts @@ -0,0 +1,69 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxl-s905x.dtsi" + +/ { + compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl"; + model = "Amlogic Meson GXL (S905X) P212 Development Board"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +/* This UART is brought out to the DB9 connector */ +&uart_AO { + status = "okay"; +}; diff --git a/dts/src/arm64/amlogic/meson-gxl-s905x.dtsi b/dts/src/arm64/amlogic/meson-gxl-s905x.dtsi new file mode 100644 index 0000000000..08237ee1e3 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxl-s905x.dtsi @@ -0,0 +1,54 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "meson-gxl.dtsi" + +/ { + compatible = "amlogic,s905x", "amlogic,meson-gxl"; +}; + +/* S905X Only has access to its internal PHY */ +ðmac { + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; diff --git a/dts/src/arm64/amlogic/meson-gxl.dtsi b/dts/src/arm64/amlogic/meson-gxl.dtsi new file mode 100644 index 0000000000..9f89b99c48 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxl.dtsi @@ -0,0 +1,301 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "meson-gx.dtsi" +#include <dt-bindings/clock/gxbb-clkc.h> +#include <dt-bindings/gpio/meson-gxbb-gpio.h> + +/ { + compatible = "amlogic,meson-gxl"; +}; + +ðmac { + reg = <0x0 0xc9410000 0x0 0x10000 + 0x0 0xc8834540 0x0 0x4>; + + clocks = <&clkc CLKID_ETH>, + <&clkc CLKID_FCLK_DIV2>, + <&clkc CLKID_MPLL2>; + clock-names = "stmmaceth", "clkin0", "clkin1"; + + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; +}; + +&aobus { + pinctrl_aobus: pinctrl@14 { + compatible = "amlogic,meson-gxl-aobus-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio_ao: bank@14 { + reg = <0x0 0x00014 0x0 0x8>, + <0x0 0x0002c 0x0 0x4>, + <0x0 0x00024 0x0 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + + remote_input_ao_pins: remote_input_ao { + mux { + groups = "remote_input_ao"; + function = "remote_input_ao"; + }; + }; + }; +}; + +&periphs { + pinctrl_periphs: pinctrl@4b0 { + compatible = "amlogic,meson-gxl-periphs-pinctrl"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio: bank@4b0 { + reg = <0x0 0x004b0 0x0 0x28>, + <0x0 0x004e8 0x0 0x14>, + <0x0 0x00120 0x0 0x14>, + <0x0 0x00430 0x0 0x40>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + emmc_pins: emmc { + mux { + groups = "emmc_nand_d07", + "emmc_cmd", + "emmc_clk", + "emmc_ds"; + function = "emmc"; + }; + }; + + sdcard_pins: sdcard { + mux { + groups = "sdcard_d0", + "sdcard_d1", + "sdcard_d2", + "sdcard_d3", + "sdcard_cmd", + "sdcard_clk"; + function = "sdcard"; + }; + }; + + sdio_pins: sdio { + mux { + groups = "sdio_d0", + "sdio_d1", + "sdio_d2", + "sdio_d3", + "sdio_cmd", + "sdio_clk"; + function = "sdio"; + }; + }; + + sdio_irq_pins: sdio_irq { + mux { + groups = "sdio_irq"; + function = "sdio"; + }; + }; + + uart_a_pins: uart_a { + mux { + groups = "uart_tx_a", + "uart_rx_a"; + function = "uart_a"; + }; + }; + + uart_b_pins: uart_b { + mux { + groups = "uart_tx_b", + "uart_rx_b"; + function = "uart_b"; + }; + }; + + uart_c_pins: uart_c { + mux { + groups = "uart_tx_c", + "uart_rx_c"; + function = "uart_c"; + }; + }; + + i2c_a_pins: i2c_a { + mux { + groups = "i2c_sck_a", + "i2c_sda_a"; + function = "i2c_a"; + }; + }; + + i2c_b_pins: i2c_b { + mux { + groups = "i2c_sck_b", + "i2c_sda_b"; + function = "i2c_b"; + }; + }; + + i2c_c_pins: i2c_c { + mux { + groups = "i2c_sck_c", + "i2c_sda_c"; + function = "i2c_c"; + }; + }; + + eth_pins: eth_c { + mux { + groups = "eth_mdio", + "eth_mdc", + "eth_clk_rx_clk", + "eth_rx_dv", + "eth_rxd0", + "eth_rxd1", + "eth_rxd2", + "eth_rxd3", + "eth_rgmii_tx_clk", + "eth_tx_en", + "eth_txd0", + "eth_txd1", + "eth_txd2", + "eth_txd3"; + function = "eth"; + }; + }; + + pwm_e_pins: pwm_e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + }; + }; + }; + + eth-phy-mux { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x55c 0x0 0x4>; + mux-mask = <0xffffffff>; + mdio-parent-bus = <&mdio0>; + + internal_mdio: mdio@e40908ff { + reg = <0xe40908ff>; + #address-cells = <1>; + #size-cells = <0>; + + internal_phy: ethernet-phy@8 { + compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22"; + reg = <8>; + max-speed = <100>; + }; + }; + + external_mdio: mdio@2009087f { + reg = <0x2009087f>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&hiubus { + clkc: clock-controller@0 { + compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc"; + #clock-cells = <1>; + reg = <0x0 0x0 0x0 0x3db>; + }; +}; + +&i2c_A { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_B { + clocks = <&clkc CLKID_I2C>; +}; + +&i2c_C { + clocks = <&clkc CLKID_I2C>; +}; + +&sd_emmc_a { + clocks = <&clkc CLKID_SD_EMMC_A>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; + +&sd_emmc_b { + clocks = <&clkc CLKID_SD_EMMC_B>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; + +&sd_emmc_c { + clocks = <&clkc CLKID_SD_EMMC_C>, + <&xtal>, + <&clkc CLKID_FCLK_DIV2>; + clock-names = "core", "clkin0", "clkin1"; +}; diff --git a/dts/src/arm64/amlogic/meson-gxm-nexbox-a1.dts b/dts/src/arm64/amlogic/meson-gxm-nexbox-a1.dts new file mode 100644 index 0000000000..f859d75db8 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxm-nexbox-a1.dts @@ -0,0 +1,169 @@ +/* + * Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" + +/ { + compatible = "nexbox,a1", "amlogic,s912", "amlogic,meson-gxm"; + model = "NEXBOX A1"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vddio_boot: regulator-vddio-boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; +}; + +/* This UART is brought out to the DB9 connector */ +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +ðmac { + status = "okay"; + + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + + /* Select external PHY by default */ + phy-handle = <&external_phy>; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + /* External PHY is in RGMII */ + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + max-speed = <1000>; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-gxm-s912-q200.dts b/dts/src/arm64/amlogic/meson-gxm-s912-q200.dts new file mode 100644 index 0000000000..5dbc660883 --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxm-s912-q200.dts @@ -0,0 +1,77 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" + +/ { + compatible = "amlogic,q200", "amlogic,s912", "amlogic,meson-gxm"; + model = "Amlogic Meson GXM (S912) Q200 Development Board"; +}; + +/* Q200 has exclusive choice between internal or external PHY */ +ðmac { + pinctrl-0 = <ð_pins>; + pinctrl-names = "default"; + + /* Select external PHY by default */ + phy-handle = <&external_phy>; + + /* External PHY reset is shared with internal PHY Led signals */ + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + /* External PHY is in RGMII */ + phy-mode = "rgmii"; +}; + +&external_mdio { + external_phy: ethernet-phy@0 { + compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + max-speed = <1000>; + }; +}; diff --git a/dts/src/arm64/amlogic/meson-gxm-s912-q201.dts b/dts/src/arm64/amlogic/meson-gxm-s912-q201.dts new file mode 100644 index 0000000000..95e11d7faa --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxm-s912-q201.dts @@ -0,0 +1,58 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "meson-gxm.dtsi" +#include "meson-gx-p23x-q20x.dtsi" + +/ { + compatible = "amlogic,q201", "amlogic,s912", "amlogic,meson-gxm"; + model = "Amlogic Meson GXM (S912) Q201 Development Board"; +}; + +/* Q201 has only internal PHY port */ +ðmac { + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; diff --git a/dts/src/arm64/amlogic/meson-gxm.dtsi b/dts/src/arm64/amlogic/meson-gxm.dtsi new file mode 100644 index 0000000000..c1974bbbdd --- /dev/null +++ b/dts/src/arm64/amlogic/meson-gxm.dtsi @@ -0,0 +1,114 @@ +/* + * Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "meson-gxl.dtsi" + +/ { + compatible = "amlogic,meson-gxm"; + + cpus { + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x102>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x103>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + }; +}; diff --git a/dts/src/arm64/arm/juno-base.dtsi b/dts/src/arm64/arm/juno-base.dtsi index 7d3a2acc6a..7d832247d0 100644 --- a/dts/src/arm64/arm/juno-base.dtsi +++ b/dts/src/arm64/arm/juno-base.dtsi @@ -29,6 +29,28 @@ clock-names = "apb_pclk"; }; + smmu_pcie: iommu@2b500000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x2b500000 0x0 0x10000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + dma-coherent; + status = "disabled"; + }; + + smmu_etr: iommu@2b600000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x2b600000 0x0 0x10000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + dma-coherent; + status = "disabled"; + }; + gic: interrupt-controller@2c010000 { compatible = "arm,gic-400", "arm,cortex-a15-gic"; reg = <0x0 0x2c010000 0 0x1000>, @@ -146,6 +168,7 @@ etr@20070000 { compatible = "arm,coresight-tmc", "arm,primecell"; reg = <0 0x20070000 0 0x1000>; + iommus = <&smmu_etr 0>; clocks = <&soc_smc50mhz>; clock-names = "apb_pclk"; @@ -404,6 +427,8 @@ <0 0 0 4 &gic 0 0 0 139 4>; msi-parent = <&v2m_0>; status = "disabled"; + iommu-map-mask = <0x0>; /* RC has no means to output PCI RID */ + iommu-map = <0x0 &smmu_pcie 0x0 0x1>; }; scpi { @@ -484,6 +509,48 @@ /include/ "juno-clocks.dtsi" + smmu_dma: iommu@7fb00000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x7fb00000 0x0 0x10000>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + dma-coherent; + status = "disabled"; + }; + + smmu_hdlcd1: iommu@7fb10000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x7fb10000 0x0 0x10000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + status = "disabled"; + }; + + smmu_hdlcd0: iommu@7fb20000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x7fb20000 0x0 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + status = "disabled"; + }; + + smmu_usb: iommu@7fb30000 { + compatible = "arm,mmu-401", "arm,smmu-v1"; + reg = <0x0 0x7fb30000 0x0 0x10000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + #iommu-cells = <1>; + #global-interrupts = <1>; + dma-coherent; + status = "disabled"; + }; + dma@7ff00000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0x7ff00000 0 0x1000>; @@ -499,6 +566,15 @@ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu_dma 0>, + <&smmu_dma 1>, + <&smmu_dma 2>, + <&smmu_dma 3>, + <&smmu_dma 4>, + <&smmu_dma 5>, + <&smmu_dma 6>, + <&smmu_dma 7>, + <&smmu_dma 8>; clocks = <&soc_faxiclk>; clock-names = "apb_pclk"; }; @@ -507,6 +583,7 @@ compatible = "arm,hdlcd"; reg = <0 0x7ff50000 0 0x1000>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu_hdlcd1 0>; clocks = <&scpi_clk 3>; clock-names = "pxlclk"; @@ -521,6 +598,7 @@ compatible = "arm,hdlcd"; reg = <0 0x7ff60000 0 0x1000>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu_hdlcd0 0>; clocks = <&scpi_clk 3>; clock-names = "pxlclk"; @@ -574,6 +652,7 @@ compatible = "generic-ohci"; reg = <0x0 0x7ffb0000 0x0 0x10000>; interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu_usb 0>; clocks = <&soc_usb48mhz>; }; @@ -581,6 +660,7 @@ compatible = "generic-ehci"; reg = <0x0 0x7ffc0000 0x0 0x10000>; interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&smmu_usb 0>; clocks = <&soc_usb48mhz>; }; diff --git a/dts/src/arm64/arm/juno-r1.dts b/dts/src/arm64/arm/juno-r1.dts index f0b857d6d7..eec37feee8 100644 --- a/dts/src/arm64/arm/juno-r1.dts +++ b/dts/src/arm64/arm/juno-r1.dts @@ -90,6 +90,7 @@ next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; }; A57_1: cpu@1 { @@ -100,6 +101,7 @@ next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; }; A53_0: cpu@100 { @@ -110,6 +112,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; }; A53_1: cpu@101 { @@ -120,6 +123,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; }; A53_2: cpu@102 { @@ -130,6 +134,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; }; A53_3: cpu@103 { @@ -140,6 +145,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; }; A57_L2: l2-cache0 { diff --git a/dts/src/arm64/arm/juno-r2.dts b/dts/src/arm64/arm/juno-r2.dts index 26aaa6a767..28f40ec440 100644 --- a/dts/src/arm64/arm/juno-r2.dts +++ b/dts/src/arm64/arm/juno-r2.dts @@ -90,6 +90,7 @@ next-level-cache = <&A72_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; }; A72_1: cpu@1 { @@ -100,6 +101,7 @@ next-level-cache = <&A72_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; }; A53_0: cpu@100 { @@ -110,6 +112,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <485>; }; A53_1: cpu@101 { @@ -120,6 +123,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <485>; }; A53_2: cpu@102 { @@ -130,6 +134,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <485>; }; A53_3: cpu@103 { @@ -140,6 +145,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <485>; }; A72_L2: l2-cache0 { diff --git a/dts/src/arm64/arm/juno.dts b/dts/src/arm64/arm/juno.dts index 6e154d948a..ac5ceb73f4 100644 --- a/dts/src/arm64/arm/juno.dts +++ b/dts/src/arm64/arm/juno.dts @@ -90,6 +90,7 @@ next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; }; A57_1: cpu@1 { @@ -100,6 +101,7 @@ next-level-cache = <&A57_L2>; clocks = <&scpi_dvfs 0>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <1024>; }; A53_0: cpu@100 { @@ -110,6 +112,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; }; A53_1: cpu@101 { @@ -120,6 +123,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; }; A53_2: cpu@102 { @@ -130,6 +134,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; }; A53_3: cpu@103 { @@ -140,6 +145,7 @@ next-level-cache = <&A53_L2>; clocks = <&scpi_dvfs 1>; cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; + capacity-dmips-mhz = <578>; }; A57_L2: l2-cache0 { diff --git a/dts/src/arm64/broadcom/bcm2835-rpi.dtsi b/dts/src/arm64/broadcom/bcm2835-rpi.dtsi index e9b47b2bbc..6ddf7dfe3f 100644 --- a/dts/src/arm64/broadcom/bcm2835-rpi.dtsi +++ b/dts/src/arm64/broadcom/bcm2835-rpi.dtsi @@ -39,22 +39,21 @@ }; alt0: alt0 { - brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>; + brcm,pins = <4 5 7 8 9 10 11 14 15>; brcm,function = <BCM2835_FSEL_ALT0>; }; - - alt3: alt3 { - brcm,pins = <48 49 50 51 52 53>; - brcm,function = <BCM2835_FSEL_ALT3>; - }; }; &i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_gpio0>; status = "okay"; clock-frequency = <100000>; }; &i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_gpio2>; status = "okay"; clock-frequency = <100000>; }; @@ -64,11 +63,15 @@ }; &sdhci { + pinctrl-names = "default"; + pinctrl-0 = <&emmc_gpio48>; status = "okay"; bus-width = <4>; }; &pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>; status = "okay"; }; diff --git a/dts/src/arm64/broadcom/bcm2837-rpi-3-b.dts b/dts/src/arm64/broadcom/bcm2837-rpi-3-b.dts index 7841b724e3..c309633a1e 100644 --- a/dts/src/arm64/broadcom/bcm2837-rpi-3-b.dts +++ b/dts/src/arm64/broadcom/bcm2837-rpi-3-b.dts @@ -2,6 +2,7 @@ #include "bcm2837.dtsi" #include "bcm2835-rpi.dtsi" #include "bcm283x-rpi-smsc9514.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" / { compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; @@ -15,13 +16,6 @@ act { gpios = <&gpio 47 0>; }; - - pwr { - label = "PWR"; - gpios = <&gpio 35 0>; - default-state = "keep"; - linux,default-trigger = "default-on"; - }; }; }; diff --git a/dts/src/arm64/broadcom/bcm2837.dtsi b/dts/src/arm64/broadcom/bcm2837.dtsi index 8216bbb29f..19f2fe620a 100644 --- a/dts/src/arm64/broadcom/bcm2837.dtsi +++ b/dts/src/arm64/broadcom/bcm2837.dtsi @@ -1,7 +1,7 @@ #include "bcm283x.dtsi" / { - compatible = "brcm,bcm2836"; + compatible = "brcm,bcm2837"; soc { ranges = <0x7e000000 0x3f000000 0x1000000>, @@ -74,3 +74,9 @@ interrupt-parent = <&local_intc>; interrupts = <8>; }; + +/* enable thermal sensor with the correct compatible property set */ +&thermal { + compatible = "brcm,bcm2837-thermal"; + status = "okay"; +}; diff --git a/dts/src/arm64/broadcom/bcm283x-rpi-usb-host.dtsi b/dts/src/arm64/broadcom/bcm283x-rpi-usb-host.dtsi new file mode 100644 index 0000000000..73f4ece8dc --- /dev/null +++ b/dts/src/arm64/broadcom/bcm283x-rpi-usb-host.dtsi @@ -0,0 +1,3 @@ +&usb { + dr_mode = "host"; +}; diff --git a/dts/src/arm64/broadcom/bcm283x.dtsi b/dts/src/arm64/broadcom/bcm283x.dtsi index 46d46d894a..9a44da1908 100644 --- a/dts/src/arm64/broadcom/bcm283x.dtsi +++ b/dts/src/arm64/broadcom/bcm283x.dtsi @@ -104,7 +104,7 @@ reg = <0x7e104000 0x10>; }; - mailbox: mailbox@7e00b800 { + mailbox: mailbox@7e00b880 { compatible = "brcm,bcm2835-mbox"; reg = <0x7e00b880 0x40>; interrupts = <0 1>; @@ -132,6 +132,209 @@ interrupt-controller; #interrupt-cells = <2>; + + /* Defines pin muxing groups according to + * BCM2835-ARM-Peripherals.pdf page 102. + * + * While each pin can have its mux selected + * for various functions individually, some + * groups only make sense to switch to a + * particular function together. + */ + dpi_gpio0: dpi_gpio0 { + brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 + 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + emmc_gpio22: emmc_gpio22 { + brcm,pins = <22 23 24 25 26 27>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + emmc_gpio34: emmc_gpio34 { + brcm,pins = <34 35 36 37 38 39>; + brcm,function = <BCM2835_FSEL_ALT3>; + brcm,pull = <BCM2835_PUD_OFF + BCM2835_PUD_UP + BCM2835_PUD_UP + BCM2835_PUD_UP + BCM2835_PUD_UP + BCM2835_PUD_UP>; + }; + emmc_gpio48: emmc_gpio48 { + brcm,pins = <48 49 50 51 52 53>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + + gpclk0_gpio4: gpclk0_gpio4 { + brcm,pins = <4>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk1_gpio5: gpclk1_gpio5 { + brcm,pins = <5>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk1_gpio42: gpclk1_gpio42 { + brcm,pins = <42>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk1_gpio44: gpclk1_gpio44 { + brcm,pins = <44>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk2_gpio6: gpclk2_gpio6 { + brcm,pins = <6>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + gpclk2_gpio43: gpclk2_gpio43 { + brcm,pins = <43>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + + i2c0_gpio0: i2c0_gpio0 { + brcm,pins = <0 1>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + i2c0_gpio32: i2c0_gpio32 { + brcm,pins = <32 34>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + i2c0_gpio44: i2c0_gpio44 { + brcm,pins = <44 45>; + brcm,function = <BCM2835_FSEL_ALT1>; + }; + i2c1_gpio2: i2c1_gpio2 { + brcm,pins = <2 3>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + i2c1_gpio44: i2c1_gpio44 { + brcm,pins = <44 45>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + i2c_slave_gpio18: i2c_slave_gpio18 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + + jtag_gpio4: jtag_gpio4 { + brcm,pins = <4 5 6 12 13>; + brcm,function = <BCM2835_FSEL_ALT4>; + }; + jtag_gpio22: jtag_gpio22 { + brcm,pins = <22 23 24 25 26 27>; + brcm,function = <BCM2835_FSEL_ALT4>; + }; + + pcm_gpio18: pcm_gpio18 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pcm_gpio28: pcm_gpio28 { + brcm,pins = <28 29 30 31>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + + pwm0_gpio12: pwm0_gpio12 { + brcm,pins = <12>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm0_gpio18: pwm0_gpio18 { + brcm,pins = <18>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + pwm0_gpio40: pwm0_gpio40 { + brcm,pins = <40>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio13: pwm1_gpio13 { + brcm,pins = <13>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio19: pwm1_gpio19 { + brcm,pins = <19>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + pwm1_gpio41: pwm1_gpio41 { + brcm,pins = <41>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + pwm1_gpio45: pwm1_gpio45 { + brcm,pins = <45>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + + sdhost_gpio48: sdhost_gpio48 { + brcm,pins = <48 49 50 51 52 53>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + + spi0_gpio7: spi0_gpio7 { + brcm,pins = <7 8 9 10 11>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + spi0_gpio35: spi0_gpio35 { + brcm,pins = <35 36 37 38 39>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + spi1_gpio16: spi1_gpio16 { + brcm,pins = <16 17 18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT4>; + }; + spi2_gpio40: spi2_gpio40 { + brcm,pins = <40 41 42 43 44 45>; + brcm,function = <BCM2835_FSEL_ALT4>; + }; + + uart0_gpio14: uart0_gpio14 { + brcm,pins = <14 15>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; + /* Separate from the uart0_gpio14 group + * because it conflicts with spi1_gpio16, and + * people often run uart0 on the two pins + * without flow contrl. + */ + uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 { + brcm,pins = <16 17>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + uart0_gpio30: uart0_gpio30 { + brcm,pins = <30 31>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + uart0_ctsrts_gpio32: uart0_ctsrts_gpio32 { + brcm,pins = <32 33>; + brcm,function = <BCM2835_FSEL_ALT3>; + }; + + uart1_gpio14: uart1_gpio14 { + brcm,pins = <14 15>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 { + brcm,pins = <16 17>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_gpio32: uart1_gpio32 { + brcm,pins = <32 33>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 { + brcm,pins = <30 31>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_gpio36: uart1_gpio36 { + brcm,pins = <36 37 38 39>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + uart1_gpio40: uart1_gpio40 { + brcm,pins = <40 41>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; + uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 { + brcm,pins = <42 43>; + brcm,function = <BCM2835_FSEL_ALT5>; + }; }; uart0: serial@7e201000 { @@ -187,6 +390,13 @@ interrupts = <2 14>; /* pwa1 */ }; + thermal: thermal@7e212000 { + compatible = "brcm,bcm2835-thermal"; + reg = <0x7e212000 0x8>; + clocks = <&clocks BCM2835_CLOCK_TSENS>; + status = "disabled"; + }; + aux: aux@0x7e215000 { compatible = "brcm,bcm2835-aux"; #clock-cells = <1>; diff --git a/dts/src/arm64/broadcom/ns2-svk.dts b/dts/src/arm64/broadcom/ns2-svk.dts index b09f3bc5c6..de8d379f44 100644 --- a/dts/src/arm64/broadcom/ns2-svk.dts +++ b/dts/src/arm64/broadcom/ns2-svk.dts @@ -56,6 +56,10 @@ }; }; +&enet { + status = "ok"; +}; + &pci_phy0 { status = "ok"; }; @@ -157,6 +161,10 @@ status = "ok"; }; +&sdio1 { + status = "ok"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; @@ -174,6 +182,7 @@ &mdio_mux_iproc { mdio@10 { gphy0: eth-phy@10 { + enet-phy-lane-swap; reg = <0x10>; }; }; @@ -187,3 +196,37 @@ groups = "nand_grp"; }; }; + +&qspi { + bspi-sel = <0>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + reg = <0x0>; + spi-max-frequency = <12500000>; + m25p,fast-read; + spi-cpol; + spi-cpha; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x000a0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0x000a0000 0x00060000>; + }; + + partition@100000 { + label = "system"; + reg = <0x00100000 0x00600000>; + }; + + partition@700000 { + label = "rootfs"; + reg = <0x00700000 0x01900000>; + }; + }; +}; diff --git a/dts/src/arm64/broadcom/ns2.dtsi b/dts/src/arm64/broadcom/ns2.dtsi index d95dc40862..4fcdeca3a9 100644 --- a/dts/src/arm64/broadcom/ns2.dtsi +++ b/dts/src/arm64/broadcom/ns2.dtsi @@ -133,6 +133,9 @@ status = "disabled"; + phys = <&pci_phy0>; + phy-names = "pcie-phy"; + msi-parent = <&msi0>; msi0: msi@20020000 { compatible = "brcm,iproc-msi"; @@ -171,6 +174,9 @@ status = "disabled"; + phys = <&pci_phy1>; + phy-names = "pcie-phy"; + msi-parent = <&msi4>; msi4: msi@50020000 { compatible = "brcm,iproc-msi"; @@ -191,6 +197,54 @@ #include "ns2-clock.dtsi" + enet: ethernet@61000000 { + compatible = "brcm,ns2-amac"; + reg = <0x61000000 0x1000>, + <0x61090000 0x1000>, + <0x61030000 0x100>; + reg-names = "amac_base", "idm_base", "nicpm_base"; + interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>; + phy-handle = <&gphy0>; + phy-mode = "rgmii"; + status = "disabled"; + }; + + pdc0: iproc-pdc0@612c0000 { + compatible = "brcm,iproc-pdc-mbox"; + reg = <0x612c0000 0x445>; /* PDC FS0 regs */ + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; + + pdc1: iproc-pdc1@612e0000 { + compatible = "brcm,iproc-pdc-mbox"; + reg = <0x612e0000 0x445>; /* PDC FS1 regs */ + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; + + pdc2: iproc-pdc2@61300000 { + compatible = "brcm,iproc-pdc-mbox"; + reg = <0x61300000 0x445>; /* PDC FS2 regs */ + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; + + pdc3: iproc-pdc3@61320000 { + compatible = "brcm,iproc-pdc-mbox"; + reg = <0x61320000 0x445>; /* PDC FS3 regs */ + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; + dma0: dma@61360000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x61360000 0x1000>; @@ -248,7 +302,7 @@ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; - mmu-masters; + #iommu-cells = <1>; }; pinctrl: pinctrl@6501d130 { @@ -565,5 +619,23 @@ brcm,nand-has-wp; }; + + qspi: spi@66470200 { + compatible = "brcm,spi-bcm-qspi", "brcm,spi-ns2-qspi"; + reg = <0x66470200 0x184>, + <0x66470000 0x124>, + <0x67017408 0x004>, + <0x664703a0 0x01c>; + reg-names = "mspi", "bspi", "intr_regs", + "intr_status_reg"; + interrupts = <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "spi_l1_intr"; + clocks = <&iprocmed>; + clock-names = "iprocmed"; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; }; diff --git a/dts/src/arm64/exynos/exynos5433-pinctrl.dtsi b/dts/src/arm64/exynos/exynos5433-pinctrl.dtsi new file mode 100644 index 0000000000..ad71247b07 --- /dev/null +++ b/dts/src/arm64/exynos/exynos5433-pinctrl.dtsi @@ -0,0 +1,804 @@ +/* + * Samsung's Exynos5433 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * Chanwoo Choi <cw00.choi@samsung.com> + * + * Samsung's Exynos5433 SoC pin-mux and pin-config options are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define PIN_PULL_NONE 0 +#define PIN_PULL_DOWN 1 +#define PIN_PULL_UP 3 + +#define PIN_DRV_LV1 0 +#define PIN_DRV_LV2 2 +#define PIN_DRV_LV3 1 +#define PIN_DRV_LV4 3 + +#define PIN_IN 0 +#define PIN_OUT 1 +#define PIN_FUNC1 2 + +#define PIN(_func, _pin, _pull, _drv) \ + _pin { \ + samsung,pins = #_pin; \ + samsung,pin-function = <PIN_ ##_func>; \ + samsung,pin-pud = <PIN_PULL_ ##_pull>; \ + samsung,pin-drv = <PIN_DRV_ ##_drv>; \ + } + +&pinctrl_alive { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa3: gpa3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf4: gpf4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf5: gpf5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_aud { + gpz0: gpz0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpz1: gpz1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpz0-0", "gpz0-1", "gpz0-2", "gpz0-3", + "gpz0-4", "gpz0-5", "gpz0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + pcm0_bus: pcm0-bus { + samsung,pins = "gpz1-0", "gpz1-1", "gpz1-2", "gpz1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + uart_aud_bus: uart-aud-bus { + samsung,pins = "gpz1-3", "gpz1-2", "gpz1-1", "gpz1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_cpif { + gpv6: gpv6 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_ese { + gpj2: gpj2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_finger { + gpd5: gpd5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpd5-0", "gpd5-2", "gpd5-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c6_bus: hs-i2c6-bus { + samsung,pins = "gpd5-3", "gpd5-2"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_fsys { + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr4: gpr4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr0: gpr0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr1: gpr1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr2: gpr2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr3: gpr3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpr0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpr0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_rdqs: sd0-rdqs { + samsung,pins = "gpr0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + + sd0_qrdy: sd0-qrdy { + samsung,pins = "gpr0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpr1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpr2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpr2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpr3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + pcie_bus: pcie_bus { + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpr4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpr4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpr4-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpr4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_clk_output: sd2-clk-output { + samsung,pins = "gpr4-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sd2_cmd_output: sd2-cmd-output { + samsung,pins = "gpr4-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; +}; + +&pinctrl_imem { + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_nfc { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c4_bus: hs-i2c4-bus { + samsung,pins = "gpj0-1", "gpj0-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_peric { + gpv7: gpv7 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd2: gpd2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd4: gpd4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd8: gpd8 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd6: gpd6 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd7: gpd7 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c8_bus: hs-i2c8-bus { + samsung,pins = "gpb0-1", "gpb0-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c9_bus: hs-i2c9-bus { + samsung,pins = "gpb0-3", "gpb0-2"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", + "gpd4-3", "gpd4-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpd4-0", "gpd4-1", "gpd4-2", + "gpd4-3", "gpd4-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpd4-3", "gpd4-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + fimc_is_spi_pin0: fimc-is-spi-pin0 { + samsung,pins = "gpc3-3", "gpc3-2", "gpc3-1", "gpc3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_spi_pin1: fimc-is-spi-pin1 { + samsung,pins = "gpc3-7", "gpc3-6", "gpc3-5", "gpc3-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_bus: uart0-bus { + samsung,pins = "gpd0-3", "gpd0-2", "gpd0-1", "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + hs_i2c2_bus: hs-i2c2-bus { + samsung,pins = "gpd0-3", "gpd0-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart2_bus: uart2-bus { + samsung,pins = "gpd1-5", "gpd1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + uart1_bus: uart1-bus { + samsung,pins = "gpd1-3", "gpd1-2", "gpd1-1", "gpd1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + }; + + hs_i2c3_bus: hs-i2c3-bus { + samsung,pins = "gpd1-3", "gpd1-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c0_bus: hs-i2c0-bus { + samsung,pins = "gpd2-1", "gpd2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c1_bus: hs-i2c1-bus { + samsung,pins = "gpd2-3", "gpd2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd2-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd2-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd2-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpd6-2", "gpd6-4", "gpd6-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c7_bus: hs-i2c7-bus { + samsung,pins = "gpd2-7", "gpd2-6"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpd8-0", "gpd6-0", "gpd6-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c10_bus: hs-i2c10-bus { + samsung,pins = "gpg3-1", "gpg3-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c11_bus: hs-i2c11-bus { + samsung,pins = "gpg3-3", "gpg3-2"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi3_bus: spi3-bus { + samsung,pins = "gpg3-4", "gpg3-6", "gpg3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi4_bus: spi4-bus { + samsung,pins = "gpv7-1", "gpv7-3", "gpv7-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + fimc_is_uart: fimc-is-uart { + samsung,pins = "gpc1-1", "gpc0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch0_i2c: fimc-is-ch0_i2c { + samsung,pins = "gpc2-1", "gpc2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch0_mclk: fimc-is-ch0_mclk { + samsung,pins = "gpd7-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch1_i2c: fimc-is-ch1-i2c { + samsung,pins = "gpc2-3", "gpc2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch1_mclk: fimc-is-ch1-mclk { + samsung,pins = "gpd7-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch2_i2c: fimc-is-ch2-i2c { + samsung,pins = "gpc2-5", "gpc2-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + fimc_is_ch2_mclk: fimc-is-ch2-mclk { + samsung,pins = "gpd7-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_touch { + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c5_bus: hs-i2c5-bus { + samsung,pins = "gpj1-1", "gpj1-0"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; diff --git a/dts/src/arm64/exynos/exynos5433-tm2.dts b/dts/src/arm64/exynos/exynos5433-tm2.dts new file mode 100644 index 0000000000..f21bdc2ff8 --- /dev/null +++ b/dts/src/arm64/exynos/exynos5433-tm2.dts @@ -0,0 +1,1049 @@ +/* + * SAMSUNG Exynos5433 TM2 board device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * + * Device tree source file for Samsung's TM2 board which is based on + * Samsung Exynos5433 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos5433.dtsi" +#include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Samsung TM2 board"; + compatible = "samsung,tm2", "samsung,exynos5433"; + + aliases { + gsc0 = &gsc_0; + gsc1 = &gsc_1; + gsc2 = &gsc_2; + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_aud; + pinctrl2 = &pinctrl_cpif; + pinctrl3 = &pinctrl_ese; + pinctrl4 = &pinctrl_finger; + pinctrl5 = &pinctrl_fsys; + pinctrl6 = &pinctrl_imem; + pinctrl7 = &pinctrl_nfc; + pinctrl8 = &pinctrl_peric; + pinctrl9 = &pinctrl_touch; + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + serial3 = &serial_3; + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + spi3 = &spi_3; + spi4 = &spi_4; + mshc0 = &mshc_0; + mshc2 = &mshc_2; + }; + + chosen { + stdout-path = &serial_1; + }; + + memory@20000000 { + device_type = "memory"; + reg = <0x0 0x20000000 0x0 0xc0000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&gpa2 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + label = "power key"; + debounce-interval = <10>; + }; + + volume-up-key { + gpios = <&gpa2 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + label = "volume-up key"; + debounce-interval = <10>; + }; + + volume-down-key { + gpios = <&gpa2 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + label = "volume-down key"; + debounce-interval = <10>; + }; + + homepage-key { + gpios = <&gpa0 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + label = "homepage key"; + debounce-interval = <10>; + }; + }; + + i2c_max98504: i2c-gpio-0 { + compatible = "i2c-gpio"; + gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ + &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + max98504: max98504@31 { + compatible = "maxim,max98504"; + reg = <0x31>; + maxim,rx-path = <1>; + maxim,tx-path = <1>; + maxim,tx-channel-mask = <3>; + maxim,tx-channel-source = <2>; + }; + }; + + sound { + compatible = "samsung,tm2-audio"; + audio-codec = <&wm5110>; + i2s-controller = <&i2s0>; + audio-amplifier = <&max98504>; + mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; + model = "wm5110"; + samsung,audio-routing = + /* Headphone */ + "HP", "HPOUT1L", + "HP", "HPOUT1R", + + /* Speaker */ + "SPK", "SPKOUT", + "SPKOUT", "HPOUT2L", + "SPKOUT", "HPOUT2R", + + /* Receiver */ + "RCV", "HPOUT3L", + "RCV", "HPOUT3R"; + status = "okay"; + }; +}; + +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; + + thermistor-ap { + compatible = "murata,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 0>; + }; + + thermistor-battery { + compatible = "murata,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 1>; + #thermal-sensor-cells = <0>; + }; + + thermistor-charger { + compatible = "murata,ncp03wf104"; + pullup-uv = <1800000>; + pullup-ohm = <100000>; + pulldown-ohm = <0>; + io-channels = <&adc 2>; + }; +}; + +&cmu_aud { + assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>; + assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; +}; + +&cmu_fsys { + assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>, + <&cmu_top CLK_MOUT_SCLK_USBHOST30>, + <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, + <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, + <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>, + <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>, + <&cmu_top CLK_DIV_SCLK_USBDRD30>, + <&cmu_top CLK_DIV_SCLK_USBHOST30>; + assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>, + <&cmu_top CLK_MOUT_BUS_PLL_USER>, + <&cmu_top CLK_SCLK_USBDRD30_FSYS>, + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; + assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, + <66700000>, <66700000>; +}; + +&cmu_gscl { + assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>, + <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>; + assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>, + <&cmu_top CLK_ACLK_GSCL_333>; +}; + +&cmu_mfc { + assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>; + assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>; +}; + +&cmu_mscl { + assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>, + <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, + <&cmu_mscl CLK_MOUT_SCLK_JPEG>, + <&cmu_top CLK_MOUT_SCLK_JPEG_A>; + assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>, + <&cmu_top CLK_SCLK_JPEG_MSCL>, + <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, + <&cmu_top CLK_MOUT_BUS_PLL_USER>; +}; + +&cpu0 { + cpu-supply = <&buck3_reg>; +}; + +&cpu4 { + cpu-supply = <&buck2_reg>; +}; + +&decon { + status = "okay"; + + i80-if-timings { + }; +}; + +&dsi { + status = "okay"; + vddcore-supply = <&ldo6_reg>; + vddio-supply = <&ldo7_reg>; + samsung,pll-clock-frequency = <24000000>; + pinctrl-names = "default"; + pinctrl-0 = <&te_irq>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + samsung,burst-clock-frequency = <512000000>; + samsung,esc-clock-frequency = <16000000>; + }; + }; + }; +}; + +&hsi2c_0 { + status = "okay"; + clock-frequency = <2500000>; + + s2mps13-pmic@66 { + compatible = "samsung,s2mps13-pmic"; + interrupt-parent = <&gpa0>; + interrupts = <7 IRQ_TYPE_NONE>; + reg = <0x66>; + samsung,s2mps11-wrstbi-ground; + + s2mps13_osc: clocks { + compatible = "samsung,s2mps13-clk"; + #clock-cells = <1>; + clock-output-names = "s2mps13_ap", "s2mps13_cp", + "s2mps13_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_0.9V_AP"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_MMC2_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDD1_E_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD10_MIF_PLL_1.0V_AP"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD10_DPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MIPI2L_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD18_MIPI2L_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD18_LLI_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD18_ABB_ETC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD33_USB30_3.0V_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_INT_M_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD_KFC_M_1.1V_AP"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDD_G3D_M_0.95V_AP"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <950000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDDQ_M1_LDO_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDDQ_M2_LDO_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDDQ_EFUSE"; + regulator-min-microvolt = <1400000>; + regulator-max-microvolt = <3400000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "V_TFLASH_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo18_reg: LDO18 { + regulator-name = "V_CODEC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "VDDA_1.8V_COMP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo20_reg: LDO20 { + regulator-name = "VCC_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo22_reg: LDO22 { + regulator-name = "CAM_IO_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "CAM_SEN_CORE_1.2V_AP"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1200000>; + }; + + ldo24_reg: LDO24 { + regulator-name = "VT_CAM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "CAM_SEN_A2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo26_reg: LDO26 { + regulator-name = "CAM_AF_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "VCC_3.0V_LCD_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo28_reg: LDO28 { + regulator-name = "VCC_1.8V_LCD_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo29_reg: LDO29 { + regulator-name = "VT_CAM_2.8V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo30_reg: LDO30 { + regulator-name = "TSP_AVDD_3.3V_AP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo31_reg: LDO31 { + regulator-name = "TSP_VDD_1.85V_AP"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + ldo32_reg: LDO32 { + regulator-name = "VTOUCH_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo33_reg: LDO33 { + regulator-name = "VTOUCH_LED_3.3V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + }; + + ldo34_reg: LDO34 { + regulator-name = "VCC_1.8V_MHL_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2100000>; + }; + + ldo35_reg: LDO35 { + regulator-name = "OIS_VM_2.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo36_reg: LDO36 { + regulator-name = "VSIL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo37_reg: LDO37 { + regulator-name = "VF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo38_reg: LDO38 { + regulator-name = "VCC_3.0V_MOTOR_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo39_reg: LDO39 { + regulator-name = "V_HRM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo40_reg: LDO40 { + regulator-name = "V_HRM_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_MIF_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_EGL_1.0V_AP"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_KFC_1.0V_AP"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck4_reg: BUCK4 { + regulator-name = "VDD_INT_0.95V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDD_DISP_CAM0_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck6_reg: BUCK6 { + regulator-name = "VDD_G3D_0.9V_AP"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck7_reg: BUCK7 { + regulator-name = "VDD_MEM1_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "VDD_LLDO_1.35V_AP"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "VDD_MLDO_2.0V_AP"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_mem2"; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + }; + }; +}; + +&hsi2c_8 { + status = "okay"; + + max77843@66 { + compatible = "maxim,max77843"; + interrupt-parent = <&gpa1>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reg = <0x66>; + + muic: max77843-muic { + compatible = "maxim,max77843-muic"; + }; + + regulators { + compatible = "maxim,max77843-regulator"; + safeout1_reg: SAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + safeout2_reg: SAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <4950000>; + }; + + charger_reg: CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <100000>; + regulator-max-microamp = <3150000>; + }; + }; + + haptic: max77843-haptic { + compatible = "maxim,max77843-haptic"; + haptic-supply = <&ldo38_reg>; + pwms = <&pwm 0 33670 0>; + pwm-names = "haptic"; + }; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mshc_0 { + status = "okay"; + num-slots = <1>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-highspeed; + non-removable; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 3>; + samsung,read-strobe-delay = <90>; + fifo-depth = <0x80>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 + &sd0_bus8 &sd0_rdqs>; + bus-width = <8>; + assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; + assigned-clock-rates = <800000000>; +}; + +&mshc_2 { + status = "okay"; + num-slots = <1>; + cap-sd-highspeed; + disable-wp; + cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>; + cd-inverted; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + fifo-depth = <0x80>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; +}; + +&pinctrl_alive { + pinctrl-names = "default"; + pinctrl-0 = <&initial_alive>; + + initial_alive: initial-state { + PIN(IN, gpa0-0, DOWN, LV1); + PIN(IN, gpa0-1, NONE, LV1); + PIN(IN, gpa0-2, DOWN, LV1); + PIN(IN, gpa0-3, NONE, LV1); + PIN(IN, gpa0-4, NONE, LV1); + PIN(IN, gpa0-5, DOWN, LV1); + PIN(IN, gpa0-6, NONE, LV1); + PIN(IN, gpa0-7, NONE, LV1); + + PIN(IN, gpa1-0, UP, LV1); + PIN(IN, gpa1-1, NONE, LV1); + PIN(IN, gpa1-2, NONE, LV1); + PIN(IN, gpa1-3, DOWN, LV1); + PIN(IN, gpa1-4, DOWN, LV1); + PIN(IN, gpa1-5, NONE, LV1); + PIN(IN, gpa1-6, NONE, LV1); + PIN(IN, gpa1-7, NONE, LV1); + + PIN(IN, gpa2-0, NONE, LV1); + PIN(IN, gpa2-1, NONE, LV1); + PIN(IN, gpa2-2, NONE, LV1); + PIN(IN, gpa2-3, DOWN, LV1); + PIN(IN, gpa2-4, NONE, LV1); + PIN(IN, gpa2-5, DOWN, LV1); + PIN(IN, gpa2-6, DOWN, LV1); + PIN(IN, gpa2-7, NONE, LV1); + + PIN(IN, gpa3-0, DOWN, LV1); + PIN(IN, gpa3-1, DOWN, LV1); + PIN(IN, gpa3-2, NONE, LV1); + PIN(IN, gpa3-3, DOWN, LV1); + PIN(IN, gpa3-4, NONE, LV1); + PIN(IN, gpa3-5, DOWN, LV1); + PIN(IN, gpa3-6, DOWN, LV1); + PIN(IN, gpa3-7, DOWN, LV1); + + PIN(IN, gpf1-0, NONE, LV1); + PIN(IN, gpf1-1, NONE, LV1); + PIN(IN, gpf1-2, DOWN, LV1); + PIN(IN, gpf1-4, UP, LV1); + PIN(OUT, gpf1-5, NONE, LV1); + PIN(IN, gpf1-6, DOWN, LV1); + PIN(IN, gpf1-7, DOWN, LV1); + + PIN(IN, gpf2-0, DOWN, LV1); + PIN(IN, gpf2-1, DOWN, LV1); + PIN(IN, gpf2-2, DOWN, LV1); + PIN(IN, gpf2-3, DOWN, LV1); + + PIN(IN, gpf3-0, DOWN, LV1); + PIN(IN, gpf3-1, DOWN, LV1); + PIN(IN, gpf3-2, NONE, LV1); + PIN(IN, gpf3-3, DOWN, LV1); + + PIN(IN, gpf4-0, DOWN, LV1); + PIN(IN, gpf4-1, DOWN, LV1); + PIN(IN, gpf4-2, DOWN, LV1); + PIN(IN, gpf4-3, DOWN, LV1); + PIN(IN, gpf4-4, DOWN, LV1); + PIN(IN, gpf4-5, DOWN, LV1); + PIN(IN, gpf4-6, DOWN, LV1); + PIN(IN, gpf4-7, DOWN, LV1); + + PIN(IN, gpf5-0, DOWN, LV1); + PIN(IN, gpf5-1, DOWN, LV1); + PIN(IN, gpf5-2, DOWN, LV1); + PIN(IN, gpf5-3, DOWN, LV1); + PIN(OUT, gpf5-4, NONE, LV1); + PIN(IN, gpf5-5, DOWN, LV1); + PIN(IN, gpf5-6, DOWN, LV1); + PIN(IN, gpf5-7, DOWN, LV1); + }; + + te_irq: te_irq { + samsung,pins = "gpf1-3"; + samsung,pin-function = <0xf>; + }; +}; + +&pinctrl_cpif { + pinctrl-names = "default"; + pinctrl-0 = <&initial_cpif>; + + initial_cpif: initial-state { + PIN(IN, gpv6-0, DOWN, LV1); + PIN(IN, gpv6-1, DOWN, LV1); + }; +}; + +&pinctrl_ese { + pinctrl-names = "default"; + pinctrl-0 = <&initial_ese>; + + initial_ese: initial-state { + PIN(IN, gpj2-0, DOWN, LV1); + PIN(IN, gpj2-1, DOWN, LV1); + PIN(IN, gpj2-2, DOWN, LV1); + }; +}; + +&pinctrl_fsys { + pinctrl-names = "default"; + pinctrl-0 = <&initial_fsys>; + + initial_fsys: initial-state { + PIN(IN, gpr3-0, NONE, LV1); + PIN(IN, gpr3-1, DOWN, LV1); + PIN(IN, gpr3-2, DOWN, LV1); + PIN(IN, gpr3-3, DOWN, LV1); + PIN(IN, gpr3-7, NONE, LV1); + }; +}; + +&pinctrl_imem { + pinctrl-names = "default"; + pinctrl-0 = <&initial_imem>; + + initial_imem: initial-state { + PIN(IN, gpf0-0, UP, LV1); + PIN(IN, gpf0-1, UP, LV1); + PIN(IN, gpf0-2, DOWN, LV1); + PIN(IN, gpf0-3, UP, LV1); + PIN(IN, gpf0-4, DOWN, LV1); + PIN(IN, gpf0-5, NONE, LV1); + PIN(IN, gpf0-6, DOWN, LV1); + PIN(IN, gpf0-7, UP, LV1); + }; +}; + +&pinctrl_nfc { + pinctrl-names = "default"; + pinctrl-0 = <&initial_nfc>; + + initial_nfc: initial-state { + PIN(IN, gpj0-2, DOWN, LV1); + }; +}; + +&pinctrl_peric { + pinctrl-names = "default"; + pinctrl-0 = <&initial_peric>; + + initial_peric: initial-state { + PIN(IN, gpv7-0, DOWN, LV1); + PIN(IN, gpv7-1, DOWN, LV1); + PIN(IN, gpv7-2, NONE, LV1); + PIN(IN, gpv7-3, DOWN, LV1); + PIN(IN, gpv7-4, DOWN, LV1); + PIN(IN, gpv7-5, DOWN, LV1); + + PIN(IN, gpb0-4, DOWN, LV1); + + PIN(IN, gpc0-2, DOWN, LV1); + PIN(IN, gpc0-5, DOWN, LV1); + PIN(IN, gpc0-7, DOWN, LV1); + + PIN(IN, gpc1-1, DOWN, LV1); + + PIN(IN, gpc3-4, NONE, LV1); + PIN(IN, gpc3-5, NONE, LV1); + PIN(IN, gpc3-6, NONE, LV1); + PIN(IN, gpc3-7, NONE, LV1); + + PIN(OUT, gpg0-0, NONE, LV1); + PIN(FUNC1, gpg0-1, DOWN, LV1); + + PIN(IN, gpd2-5, DOWN, LV1); + + PIN(IN, gpd4-0, NONE, LV1); + PIN(IN, gpd4-1, DOWN, LV1); + PIN(IN, gpd4-2, DOWN, LV1); + PIN(IN, gpd4-3, DOWN, LV1); + PIN(IN, gpd4-4, DOWN, LV1); + + PIN(IN, gpd6-3, DOWN, LV1); + + PIN(IN, gpd8-1, UP, LV1); + + PIN(IN, gpg1-0, DOWN, LV1); + PIN(IN, gpg1-1, DOWN, LV1); + PIN(IN, gpg1-2, DOWN, LV1); + PIN(IN, gpg1-3, DOWN, LV1); + PIN(IN, gpg1-4, DOWN, LV1); + + PIN(IN, gpg2-0, DOWN, LV1); + PIN(IN, gpg2-1, DOWN, LV1); + + PIN(IN, gpg3-0, DOWN, LV1); + PIN(IN, gpg3-1, DOWN, LV1); + PIN(IN, gpg3-5, DOWN, LV1); + PIN(IN, gpg3-7, DOWN, LV1); + }; +}; + +&pinctrl_touch { + pinctrl-names = "default"; + pinctrl-0 = <&initial_touch>; + + initial_touch: initial-state { + PIN(IN, gpj1-2, DOWN, LV1); + }; +}; + +&pwm { + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mic { + status = "okay"; + + i80-if-timings { + }; +}; + +&pmu_system_controller { + assigned-clocks = <&pmu_system_controller 0>; + assigned-clock-parents = <&xxti>; +}; + +&serial_1 { + status = "okay"; +}; + +&spi_1 { + cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; + status = "okay"; + + wm5110: wm5110-codec@0 { + compatible = "wlf,wm5110"; + reg = <0x0>; + spi-max-frequency = <20000000>; + interrupt-parent = <&gpa0>; + interrupts = <4 IRQ_TYPE_NONE>; + clocks = <&pmu_system_controller 0>, + <&s2mps13_osc S2MPS11_CLK_BT>; + clock-names = "mclk1", "mclk2"; + + gpio-controller; + #gpio-cells = <2>; + + wlf,micd-detect-debounce = <300>; + wlf,micd-bias-start-time = <0x1>; + wlf,micd-rate = <0x7>; + wlf,micd-dbtime = <0x1>; + wlf,micd-force-micbias; + wlf,micd-configs = <0x0 1 0>; + wlf,hpdet-channel = <1>; + wlf,gpsw = <0x1>; + wlf,inmode = <2 0 2 0>; + + wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; + wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; + + /* core supplies */ + AVDD-supply = <&ldo18_reg>; + DBVDD1-supply = <&ldo18_reg>; + CPVDD-supply = <&ldo18_reg>; + DBVDD2-supply = <&ldo18_reg>; + DBVDD3-supply = <&ldo18_reg>; + + controller-data { + samsung,spi-feedback-delay = <0>; + }; + }; +}; + +&timer { + clock-frequency = <24000000>; +}; + +&tmu_atlas0 { + vtmu-supply = <&ldo3_reg>; + status = "okay"; +}; + +&tmu_apollo { + vtmu-supply = <&ldo3_reg>; + status = "okay"; +}; + +&tmu_g3d { + vtmu-supply = <&ldo3_reg>; + status = "okay"; +}; + +&usbdrd30 { + vdd33-supply = <&ldo10_reg>; + vdd10-supply = <&ldo6_reg>; + status = "okay"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "otg"; +}; + +&usbdrd30_phy { + vbus-supply = <&safeout1_reg>; + status = "okay"; +}; + +&xxti { + clock-frequency = <24000000>; +}; diff --git a/dts/src/arm64/exynos/exynos5433-tm2e.dts b/dts/src/arm64/exynos/exynos5433-tm2e.dts new file mode 100644 index 0000000000..1db4e7f363 --- /dev/null +++ b/dts/src/arm64/exynos/exynos5433-tm2e.dts @@ -0,0 +1,41 @@ +/* + * SAMSUNG Exynos5433 TM2E board device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * + * Device tree source file for Samsung's TM2E(TM2 EDGE) board which is based on + * Samsung Exynos5433 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "exynos5433-tm2.dts" + +/ { + model = "Samsung TM2E board"; + compatible = "samsung,tm2e", "samsung,exynos5433"; +}; + +&ldo23_reg { + regulator-name = "CAM_SEN_CORE_1.025V_AP"; + regulator-max-microvolt = <1050000>; +}; + +&ldo25_reg { + regulator-name = "UNUSED_LDO25"; + regulator-always-off; +}; + +&ldo31_reg { + regulator-name = "TSP_VDD_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; +}; + +&ldo38_reg { + regulator-name = "VCC_3.3V_MOTOR_AP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; diff --git a/dts/src/arm64/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi b/dts/src/arm64/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi new file mode 100644 index 0000000000..9be2978f1b --- /dev/null +++ b/dts/src/arm64/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi @@ -0,0 +1,23 @@ +/* + * Device tree sources for Exynos5433 TMU sensor configuration + * + * Copyright (c) 2016 Jonghwa Lee <jonghwa3.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <8>; +samsung,tmu_reference_voltage = <23>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <75>; +samsung,tmu_min_efuse_value = <40>; +samsung,tmu_max_efuse_value = <150>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <85>; +samsung,tmu_default_temp_offset = <50>; +samsung,tmu_mux_addr = <6>; diff --git a/dts/src/arm64/exynos/exynos5433-tmu-sensor-conf.dtsi b/dts/src/arm64/exynos/exynos5433-tmu-sensor-conf.dtsi new file mode 100644 index 0000000000..125fe58d77 --- /dev/null +++ b/dts/src/arm64/exynos/exynos5433-tmu-sensor-conf.dtsi @@ -0,0 +1,22 @@ +/* + * Device tree sources for Exynos5433 TMU sensor configuration + * + * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/thermal/thermal_exynos.h> + +#thermal-sensor-cells = <0>; +samsung,tmu_gain = <8>; +samsung,tmu_reference_voltage = <16>; +samsung,tmu_noise_cancel_mode = <4>; +samsung,tmu_efuse_value = <75>; +samsung,tmu_min_efuse_value = <40>; +samsung,tmu_max_efuse_value = <150>; +samsung,tmu_first_point_trim = <25>; +samsung,tmu_second_point_trim = <85>; +samsung,tmu_default_temp_offset = <50>; diff --git a/dts/src/arm64/exynos/exynos5433-tmu.dtsi b/dts/src/arm64/exynos/exynos5433-tmu.dtsi new file mode 100644 index 0000000000..ceaa05145b --- /dev/null +++ b/dts/src/arm64/exynos/exynos5433-tmu.dtsi @@ -0,0 +1,296 @@ +/* + * Device tree sources for Exynos5433 thermal zone + * + * Copyright (c) 2016 Chanwoo Choi <cw00.choi@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/thermal/thermal.h> + +/ { +thermal-zones { + atlas0_thermal: atlas0-thermal { + thermal-sensors = <&tmu_atlas0>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + atlas0_alert_0: atlas0-alert-0 { + temperature = <65000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_1: atlas0-alert-1 { + temperature = <70000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_2: atlas0-alert-2 { + temperature = <75000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_3: atlas0-alert-3 { + temperature = <80000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_4: atlas0-alert-4 { + temperature = <85000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_5: atlas0-alert-5 { + temperature = <90000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas0_alert_6: atlas0-alert-6 { + temperature = <95000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map0 { + /* Set maximum frequency as 1800MHz */ + trip = <&atlas0_alert_0>; + cooling-device = <&cpu4 1 2>; + }; + map1 { + /* Set maximum frequency as 1700MHz */ + trip = <&atlas0_alert_1>; + cooling-device = <&cpu4 2 3>; + }; + map2 { + /* Set maximum frequency as 1600MHz */ + trip = <&atlas0_alert_2>; + cooling-device = <&cpu4 3 4>; + }; + map3 { + /* Set maximum frequency as 1500MHz */ + trip = <&atlas0_alert_3>; + cooling-device = <&cpu4 4 5>; + }; + map4 { + /* Set maximum frequency as 1400MHz */ + trip = <&atlas0_alert_4>; + cooling-device = <&cpu4 5 7>; + }; + map5 { + /* Set maximum frequencyas 1200MHz */ + trip = <&atlas0_alert_5>; + cooling-device = <&cpu4 7 9>; + }; + map6 { + /* Set maximum frequency as 1000MHz */ + trip = <&atlas0_alert_6>; + cooling-device = <&cpu4 9 14>; + }; + }; + }; + + atlas1_thermal: atlas1-thermal { + thermal-sensors = <&tmu_atlas1>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + atlas1_alert_0: atlas1-alert-0 { + temperature = <65000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_1: atlas1-alert-1 { + temperature = <70000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_2: atlas1-alert-2 { + temperature = <75000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_3: atlas1-alert-3 { + temperature = <80000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_4: atlas1-alert-4 { + temperature = <85000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_5: atlas1-alert-5 { + temperature = <90000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + atlas1_alert_6: atlas1-alert-6 { + temperature = <95000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + }; + }; + + g3d_thermal: g3d-thermal { + thermal-sensors = <&tmu_g3d>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + g3d_alert_0: g3d-alert-0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_1: g3d-alert-1 { + temperature = <75000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_2: g3d-alert-2 { + temperature = <80000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_3: g3d-alert-3 { + temperature = <85000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_4: g3d-alert-4 { + temperature = <90000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_5: g3d-alert-5 { + temperature = <95000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + g3d_alert_6: g3d-alert-6 { + temperature = <100000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + }; + }; + + apollo_thermal: apollo-thermal { + thermal-sensors = <&tmu_apollo>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + apollo_alert_0: apollo-alert-0 { + temperature = <65000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_1: apollo-alert-1 { + temperature = <70000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_2: apollo-alert-2 { + temperature = <75000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_3: apollo-alert-3 { + temperature = <80000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_4: apollo-alert-4 { + temperature = <85000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_5: apollo-alert-5 { + temperature = <90000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + apollo_alert_6: apollo-alert-6 { + temperature = <95000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + }; + + cooling-maps { + map0 { + /* Set maximum frequency as 1200MHz */ + trip = <&apollo_alert_2>; + cooling-device = <&cpu0 1 2>; + }; + map1 { + /* Set maximum frequency as 1100MHz */ + trip = <&apollo_alert_3>; + cooling-device = <&cpu0 2 3>; + }; + map2 { + /* Set maximum frequency as 1000MHz */ + trip = <&apollo_alert_4>; + cooling-device = <&cpu0 3 4>; + }; + map3 { + /* Set maximum frequency as 900MHz */ + trip = <&apollo_alert_5>; + cooling-device = <&cpu0 4 5>; + }; + map4 { + /* Set maximum frequency as 800MHz */ + trip = <&apollo_alert_6>; + cooling-device = <&cpu0 5 9>; + }; + }; + }; + + isp_thermal: isp-thermal { + thermal-sensors = <&tmu_isp>; + polling-delay-passive = <0>; + polling-delay = <0>; + trips { + isp_alert_0: isp-alert-0 { + temperature = <80000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_1: isp-alert-1 { + temperature = <85000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_2: isp-alert-2 { + temperature = <90000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_3: isp-alert-3 { + temperature = <95000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_4: isp-alert-4 { + temperature = <100000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_5: isp-alert-5 { + temperature = <105000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + isp_alert_6: isp-alert-6 { + temperature = <110000>; /* millicelsius */ + hysteresis = <1000>; /* millicelsius */ + type = "active"; + }; + }; + }; +}; +}; diff --git a/dts/src/arm64/exynos/exynos5433.dtsi b/dts/src/arm64/exynos/exynos5433.dtsi new file mode 100644 index 0000000000..64226d5ae4 --- /dev/null +++ b/dts/src/arm64/exynos/exynos5433.dtsi @@ -0,0 +1,1462 @@ +/* + * Samsung's Exynos5433 SoC device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * + * Samsung's Exynos5433 SoC device nodes are listed in this file. + * Exynos5433 based board files can include this file and provide + * values for board specific bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos5433 SoC. As device tree coverage for Exynos5433 increases, + * additional nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/clock/exynos5433.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "samsung,exynos5433"; + #address-cells = <2>; + #size-cells = <2>; + + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x100>; + clock-frequency = <1300000000>; + clocks = <&cmu_apollo CLK_SCLK_APOLLO>; + clock-names = "apolloclk"; + operating-points-v2 = <&cluster_a53_opp_table>; + #cooling-cells = <2>; + }; + + cpu1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x101>; + clock-frequency = <1300000000>; + operating-points-v2 = <&cluster_a53_opp_table>; + #cooling-cells = <2>; + }; + + cpu2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x102>; + clock-frequency = <1300000000>; + operating-points-v2 = <&cluster_a53_opp_table>; + #cooling-cells = <2>; + }; + + cpu3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + enable-method = "psci"; + reg = <0x103>; + clock-frequency = <1300000000>; + operating-points-v2 = <&cluster_a53_opp_table>; + #cooling-cells = <2>; + }; + + cpu4: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + enable-method = "psci"; + reg = <0x0>; + clock-frequency = <1900000000>; + clocks = <&cmu_atlas CLK_SCLK_ATLAS>; + clock-names = "atlasclk"; + operating-points-v2 = <&cluster_a57_opp_table>; + #cooling-cells = <2>; + }; + + cpu5: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + enable-method = "psci"; + reg = <0x1>; + clock-frequency = <1900000000>; + operating-points-v2 = <&cluster_a57_opp_table>; + #cooling-cells = <2>; + }; + + cpu6: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + enable-method = "psci"; + reg = <0x2>; + clock-frequency = <1900000000>; + operating-points-v2 = <&cluster_a57_opp_table>; + #cooling-cells = <2>; + }; + + cpu7: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + enable-method = "psci"; + reg = <0x3>; + clock-frequency = <1900000000>; + operating-points-v2 = <&cluster_a57_opp_table>; + #cooling-cells = <2>; + }; + }; + + cluster_a53_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <900000>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <925000>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <950000>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <975000>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1000000>; + }; + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1050000>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1075000>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1112500>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1112500>; + }; + opp@1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1150000>; + }; + }; + + cluster_a57_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <900000>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <900000>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <912500>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <912500>; + }; + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <937500>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <975000>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1012500>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1037500>; + }; + opp@1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1062500>; + }; + opp@1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1087500>; + }; + opp@1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1125000>; + }; + opp@1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1137500>; + }; + opp@1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <1175000>; + }; + opp@1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1212500>; + }; + opp@1900000000 { + opp-hz = /bits/ 64 <1900000000>; + opp-microvolt = <1262500>; + }; + }; + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_off = <0x84000002>; + cpu_on = <0xC4000003>; + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&pmu_system_controller>; + offset = <0x400>; /* SWRESET */ + mask = <0x1>; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x18000000>; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + xxti: xxti { + compatible = "fixed-clock"; + clock-output-names = "oscclk"; + #clock-cells = <0>; + }; + + cmu_top: clock-controller@10030000 { + compatible = "samsung,exynos5433-cmu-top"; + reg = <0x10030000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_mphy_pll", + "sclk_mfc_pll", + "sclk_bus_pll"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_MPHY_PLL>, + <&cmu_mif CLK_SCLK_MFC_PLL>, + <&cmu_mif CLK_SCLK_BUS_PLL>; + }; + + cmu_cpif: clock-controller@10fc0000 { + compatible = "samsung,exynos5433-cmu-cpif"; + reg = <0x10fc0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk"; + clocks = <&xxti>; + }; + + cmu_mif: clock-controller@105b0000 { + compatible = "samsung,exynos5433-cmu-mif"; + reg = <0x105b0000 0x2000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_mphy_pll"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_MPHY_PLL>; + }; + + cmu_peric: clock-controller@14c80000 { + compatible = "samsung,exynos5433-cmu-peric"; + reg = <0x14c80000 0x1000>; + #clock-cells = <1>; + }; + + cmu_peris: clock-controller@0x10040000 { + compatible = "samsung,exynos5433-cmu-peris"; + reg = <0x10040000 0x1000>; + #clock-cells = <1>; + }; + + cmu_fsys: clock-controller@156e0000 { + compatible = "samsung,exynos5433-cmu-fsys"; + reg = <0x156e0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_ufs_mphy", + "aclk_fsys_200", + "sclk_pcie_100_fsys", + "sclk_ufsunipro_fsys", + "sclk_mmc2_fsys", + "sclk_mmc1_fsys", + "sclk_mmc0_fsys", + "sclk_usbhost30_fsys", + "sclk_usbdrd30_fsys"; + clocks = <&xxti>, + <&cmu_cpif CLK_SCLK_UFS_MPHY>, + <&cmu_top CLK_ACLK_FSYS_200>, + <&cmu_top CLK_SCLK_PCIE_100_FSYS>, + <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>, + <&cmu_top CLK_SCLK_MMC2_FSYS>, + <&cmu_top CLK_SCLK_MMC1_FSYS>, + <&cmu_top CLK_SCLK_MMC0_FSYS>, + <&cmu_top CLK_SCLK_USBHOST30_FSYS>, + <&cmu_top CLK_SCLK_USBDRD30_FSYS>; + }; + + cmu_g2d: clock-controller@12460000 { + compatible = "samsung,exynos5433-cmu-g2d"; + reg = <0x12460000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_g2d_266", + "aclk_g2d_400"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_G2D_266>, + <&cmu_top CLK_ACLK_G2D_400>; + }; + + cmu_disp: clock-controller@13b90000 { + compatible = "samsung,exynos5433-cmu-disp"; + reg = <0x13b90000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_dsim1_disp", + "sclk_dsim0_disp", + "sclk_dsd_disp", + "sclk_decon_tv_eclk_disp", + "sclk_decon_vclk_disp", + "sclk_decon_eclk_disp", + "sclk_decon_tv_vclk_disp", + "aclk_disp_333"; + clocks = <&xxti>, + <&cmu_mif CLK_SCLK_DSIM1_DISP>, + <&cmu_mif CLK_SCLK_DSIM0_DISP>, + <&cmu_mif CLK_SCLK_DSD_DISP>, + <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, + <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, + <&cmu_mif CLK_ACLK_DISP_333>; + }; + + cmu_aud: clock-controller@114c0000 { + compatible = "samsung,exynos5433-cmu-aud"; + reg = <0x114c0000 0x1000>; + #clock-cells = <1>; + clock-names = "oscclk", "fout_aud_pll"; + clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; + }; + + cmu_bus0: clock-controller@13600000 { + compatible = "samsung,exynos5433-cmu-bus0"; + reg = <0x13600000 0x1000>; + #clock-cells = <1>; + + clock-names = "aclk_bus0_400"; + clocks = <&cmu_top CLK_ACLK_BUS0_400>; + }; + + cmu_bus1: clock-controller@14800000 { + compatible = "samsung,exynos5433-cmu-bus1"; + reg = <0x14800000 0x1000>; + #clock-cells = <1>; + + clock-names = "aclk_bus1_400"; + clocks = <&cmu_top CLK_ACLK_BUS1_400>; + }; + + cmu_bus2: clock-controller@13400000 { + compatible = "samsung,exynos5433-cmu-bus2"; + reg = <0x13400000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_bus2_400"; + clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>; + }; + + cmu_g3d: clock-controller@14aa0000 { + compatible = "samsung,exynos5433-cmu-g3d"; + reg = <0x14aa0000 0x2000>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_g3d_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; + }; + + cmu_gscl: clock-controller@13cf0000 { + compatible = "samsung,exynos5433-cmu-gscl"; + reg = <0x13cf0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_gscl_111", + "aclk_gscl_333"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_GSCL_111>, + <&cmu_top CLK_ACLK_GSCL_333>; + }; + + cmu_apollo: clock-controller@11900000 { + compatible = "samsung,exynos5433-cmu-apollo"; + reg = <0x11900000 0x2000>; + #clock-cells = <1>; + + clock-names = "oscclk", "sclk_bus_pll_apollo"; + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>; + }; + + cmu_atlas: clock-controller@11800000 { + compatible = "samsung,exynos5433-cmu-atlas"; + reg = <0x11800000 0x2000>; + #clock-cells = <1>; + + clock-names = "oscclk", "sclk_bus_pll_atlas"; + clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>; + }; + + cmu_mscl: clock-controller@105d0000 { + compatible = "samsung,exynos5433-cmu-mscl"; + reg = <0x150d0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_jpeg_mscl", + "aclk_mscl_400"; + clocks = <&xxti>, + <&cmu_top CLK_SCLK_JPEG_MSCL>, + <&cmu_top CLK_ACLK_MSCL_400>; + }; + + cmu_mfc: clock-controller@15280000 { + compatible = "samsung,exynos5433-cmu-mfc"; + reg = <0x15280000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_mfc_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; + }; + + cmu_hevc: clock-controller@14f80000 { + compatible = "samsung,exynos5433-cmu-hevc"; + reg = <0x14f80000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", "aclk_hevc_400"; + clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; + }; + + cmu_isp: clock-controller@146d0000 { + compatible = "samsung,exynos5433-cmu-isp"; + reg = <0x146d0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_isp_dis_400", + "aclk_isp_400"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_ISP_DIS_400>, + <&cmu_top CLK_ACLK_ISP_400>; + }; + + cmu_cam0: clock-controller@120d0000 { + compatible = "samsung,exynos5433-cmu-cam0"; + reg = <0x120d0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "aclk_cam0_333", + "aclk_cam0_400", + "aclk_cam0_552"; + clocks = <&xxti>, + <&cmu_top CLK_ACLK_CAM0_333>, + <&cmu_top CLK_ACLK_CAM0_400>, + <&cmu_top CLK_ACLK_CAM0_552>; + }; + + cmu_cam1: clock-controller@145d0000 { + compatible = "samsung,exynos5433-cmu-cam1"; + reg = <0x145d0000 0x1000>; + #clock-cells = <1>; + + clock-names = "oscclk", + "sclk_isp_uart_cam1", + "sclk_isp_spi1_cam1", + "sclk_isp_spi0_cam1", + "aclk_cam1_333", + "aclk_cam1_400", + "aclk_cam1_552"; + clocks = <&xxti>, + <&cmu_top CLK_SCLK_ISP_UART_CAM1>, + <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>, + <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>, + <&cmu_top CLK_ACLK_CAM1_333>, + <&cmu_top CLK_ACLK_CAM1_400>, + <&cmu_top CLK_ACLK_CAM1_552>; + }; + + tmu_atlas0: tmu@10060000 { + compatible = "samsung,exynos5433-tmu"; + reg = <0x10060000 0x200>; + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, + <&cmu_peris CLK_SCLK_TMU0>; + clock-names = "tmu_apbif", "tmu_sclk"; + #include "exynos5433-tmu-sensor-conf.dtsi" + status = "disabled"; + }; + + tmu_atlas1: tmu@10068000 { + compatible = "samsung,exynos5433-tmu"; + reg = <0x10068000 0x200>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peris CLK_PCLK_TMU0_APBIF>, + <&cmu_peris CLK_SCLK_TMU0>; + clock-names = "tmu_apbif", "tmu_sclk"; + #include "exynos5433-tmu-sensor-conf.dtsi" + status = "disabled"; + }; + + tmu_g3d: tmu@10070000 { + compatible = "samsung,exynos5433-tmu"; + reg = <0x10070000 0x200>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, + <&cmu_peris CLK_SCLK_TMU1>; + clock-names = "tmu_apbif", "tmu_sclk"; + #include "exynos5433-tmu-g3d-sensor-conf.dtsi" + status = "disabled"; + }; + + tmu_apollo: tmu@10078000 { + compatible = "samsung,exynos5433-tmu"; + reg = <0x10078000 0x200>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, + <&cmu_peris CLK_SCLK_TMU1>; + clock-names = "tmu_apbif", "tmu_sclk"; + #include "exynos5433-tmu-sensor-conf.dtsi" + status = "disabled"; + }; + + tmu_isp: tmu@1007c000 { + compatible = "samsung,exynos5433-tmu"; + reg = <0x1007c000 0x200>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peris CLK_PCLK_TMU1_APBIF>, + <&cmu_peris CLK_SCLK_TMU1>; + clock-names = "tmu_apbif", "tmu_sclk"; + #include "exynos5433-tmu-sensor-conf.dtsi" + status = "disabled"; + }; + + mct@101c0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101c0000 0x800>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xxti>, <&cmu_peris CLK_PCLK_MCT>; + clock-names = "fin_pll", "mct"; + }; + + pinctrl_alive: pinctrl@10580000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x10580000 0x1a20>, <0x11090000 0x100>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos7-wakeup-eint"; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + pinctrl_aud: pinctrl@114b0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x114b0000 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_cpif: pinctrl@10fe0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x10fe0000 0x1000>; + interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_ese: pinctrl@14ca0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x14ca0000 0x1000>; + interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_finger: pinctrl@14cb0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x14cb0000 0x1000>; + interrupts = <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_fsys: pinctrl@15690000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x15690000 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_imem: pinctrl@11090000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x11090000 0x1000>; + interrupts = <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_nfc: pinctrl@14cd0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x14cd0000 0x1000>; + interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_peric: pinctrl@14cc0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x14cc0000 0x1100>; + interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>; + }; + + pinctrl_touch: pinctrl@14ce0000 { + compatible = "samsung,exynos5433-pinctrl"; + reg = <0x14ce0000 0x1100>; + interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu_system_controller: system-controller@105c0000 { + compatible = "samsung,exynos5433-pmu", "syscon"; + reg = <0x105c0000 0x5008>; + #clock-cells = <1>; + clock-names = "clkout16"; + clocks = <&xxti>; + }; + + gic: interrupt-controller@11001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x11001000 0x1000>, + <0x11002000 0x2000>, + <0x11004000 0x2000>, + <0x11006000 0x2000>; + interrupts = <GIC_PPI 9 0xf04>; + }; + + mipi_phy: video-phy@105c0710 { + compatible = "samsung,exynos5433-mipi-video-phy"; + #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; + samsung,cam0-sysreg = <&syscon_cam0>; + samsung,cam1-sysreg = <&syscon_cam1>; + samsung,disp-sysreg = <&syscon_disp>; + }; + + decon: decon@13800000 { + compatible = "samsung,exynos5433-decon"; + reg = <0x13800000 0x2104>; + clocks = <&cmu_disp CLK_PCLK_DECON>, + <&cmu_disp CLK_ACLK_DECON>, + <&cmu_disp CLK_ACLK_SMMU_DECON0X>, + <&cmu_disp CLK_ACLK_XIU_DECON0X>, + <&cmu_disp CLK_PCLK_SMMU_DECON0X>, + <&cmu_disp CLK_SCLK_DECON_VCLK>, + <&cmu_disp CLK_SCLK_DECON_ECLK>; + clock-names = "pclk", "aclk_decon", "aclk_smmu_decon0x", + "aclk_xiu_decon0x", "pclk_smmu_decon0x", + "sclk_decon_vclk", "sclk_decon_eclk"; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + samsung,disp-sysreg = <&syscon_disp>; + status = "disabled"; + iommus = <&sysmmu_decon0x>, <&sysmmu_decon1x>; + iommu-names = "m0", "m1"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + decon_to_mic: endpoint { + remote-endpoint = + <&mic_to_decon>; + }; + }; + }; + }; + + dsi: dsi@13900000 { + compatible = "samsung,exynos5433-mipi-dsi"; + reg = <0x13900000 0xC0>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&cmu_disp CLK_PCLK_DSIM0>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8>, + <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0>, + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_DSIM0>, + <&cmu_disp CLK_SCLK_DSIM0>; + clock-names = "bus_clk", + "phyclk_mipidphy0_bitclkdiv8", + "phyclk_mipidphy0_rxclkesc0", + "sclk_rgb_vclk_to_dsim0", + "sclk_mipi"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi_to_mic: endpoint { + remote-endpoint = <&mic_to_dsi>; + }; + }; + }; + }; + + mic: mic@13930000 { + compatible = "samsung,exynos5433-mic"; + reg = <0x13930000 0x48>; + clocks = <&cmu_disp CLK_PCLK_MIC0>, + <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>; + clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0"; + samsung,disp-syscon = <&syscon_disp>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mic_to_decon: endpoint { + remote-endpoint = + <&decon_to_mic>; + }; + }; + + port@1 { + reg = <1>; + mic_to_dsi: endpoint { + remote-endpoint = <&dsi_to_mic>; + }; + }; + }; + }; + + syscon_disp: syscon@13b80000 { + compatible = "syscon"; + reg = <0x13b80000 0x1010>; + }; + + syscon_cam0: syscon@120f0000 { + compatible = "syscon"; + reg = <0x120f0000 0x1020>; + }; + + syscon_cam1: syscon@145f0000 { + compatible = "syscon"; + reg = <0x145f0000 0x1038>; + }; + + gsc_0: video-scaler@13C00000 { + compatible = "samsung,exynos5433-gsc"; + reg = <0x13c00000 0x1000>; + interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk", "aclk_xiu", + "aclk_gsclbend"; + clocks = <&cmu_gscl CLK_PCLK_GSCL0>, + <&cmu_gscl CLK_ACLK_GSCL0>, + <&cmu_gscl CLK_ACLK_XIU_GSCLX>, + <&cmu_gscl CLK_ACLK_GSCLBEND_333>; + iommus = <&sysmmu_gscl0>; + }; + + gsc_1: video-scaler@13C10000 { + compatible = "samsung,exynos5433-gsc"; + reg = <0x13c10000 0x1000>; + interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk", "aclk_xiu", + "aclk_gsclbend"; + clocks = <&cmu_gscl CLK_PCLK_GSCL1>, + <&cmu_gscl CLK_ACLK_GSCL1>, + <&cmu_gscl CLK_ACLK_XIU_GSCLX>, + <&cmu_gscl CLK_ACLK_GSCLBEND_333>; + iommus = <&sysmmu_gscl1>; + }; + + gsc_2: video-scaler@13C20000 { + compatible = "samsung,exynos5433-gsc"; + reg = <0x13c20000 0x1000>; + interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk", "aclk_xiu", + "aclk_gsclbend"; + clocks = <&cmu_gscl CLK_PCLK_GSCL2>, + <&cmu_gscl CLK_ACLK_GSCL2>, + <&cmu_gscl CLK_ACLK_XIU_GSCLX>, + <&cmu_gscl CLK_ACLK_GSCLBEND_333>; + iommus = <&sysmmu_gscl2>; + }; + + jpeg: codec@15020000 { + compatible = "samsung,exynos5433-jpeg"; + reg = <0x15020000 0x10000>; + interrupts = <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk", "aclk_xiu", "sclk"; + clocks = <&cmu_mscl CLK_PCLK_JPEG>, + <&cmu_mscl CLK_ACLK_JPEG>, + <&cmu_mscl CLK_ACLK_XIU_MSCLX>, + <&cmu_mscl CLK_SCLK_JPEG>; + iommus = <&sysmmu_jpeg>; + }; + + mfc: codec@152E0000 { + compatible = "samsung,exynos5433-mfc"; + reg = <0x152E0000 0x10000>; + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk", "aclk_xiu"; + clocks = <&cmu_mfc CLK_PCLK_MFC>, + <&cmu_mfc CLK_ACLK_MFC>, + <&cmu_mfc CLK_ACLK_XIU_MFCX>; + iommus = <&sysmmu_mfc_0>, <&sysmmu_mfc_1>; + iommu-names = "left", "right"; + }; + + sysmmu_decon0x: sysmmu@0x13a00000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13a00000 0x1000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON0X>, + <&cmu_disp CLK_ACLK_SMMU_DECON0X>; + #iommu-cells = <0>; + }; + + sysmmu_decon1x: sysmmu@0x13a10000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13a10000 0x1000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_disp CLK_PCLK_SMMU_DECON1X>, + <&cmu_disp CLK_ACLK_SMMU_DECON1X>; + #iommu-cells = <0>; + }; + + sysmmu_gscl0: sysmmu@0x13C80000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13C80000 0x1000>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL0>, + <&cmu_gscl CLK_PCLK_SMMU_GSCL0>; + #iommu-cells = <0>; + }; + + sysmmu_gscl1: sysmmu@0x13C90000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13C90000 0x1000>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL1>, + <&cmu_gscl CLK_PCLK_SMMU_GSCL1>; + #iommu-cells = <0>; + }; + + sysmmu_gscl2: sysmmu@0x13CA0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13CA0000 0x1000>; + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "aclk", "pclk"; + clocks = <&cmu_gscl CLK_ACLK_SMMU_GSCL2>, + <&cmu_gscl CLK_PCLK_SMMU_GSCL2>; + #iommu-cells = <0>; + }; + + sysmmu_jpeg: sysmmu@0x15060000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x15060000 0x1000>; + interrupts = <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_mscl CLK_PCLK_SMMU_JPEG>, + <&cmu_mscl CLK_ACLK_SMMU_JPEG>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_0: sysmmu@0x15200000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x15200000 0x1000>; + interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_0>, + <&cmu_mfc CLK_ACLK_SMMU_MFC_0>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_1: sysmmu@0x15210000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x15210000 0x1000>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "pclk", "aclk"; + clocks = <&cmu_mfc CLK_PCLK_SMMU_MFC_1>, + <&cmu_mfc CLK_ACLK_SMMU_MFC_1>; + #iommu-cells = <0>; + }; + + serial_0: serial@14c10000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x14c10000 0x100>; + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peric CLK_PCLK_UART0>, + <&cmu_peric CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_bus>; + status = "disabled"; + }; + + serial_1: serial@14c20000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x14c20000 0x100>; + interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peric CLK_PCLK_UART1>, + <&cmu_peric CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_bus>; + status = "disabled"; + }; + + serial_2: serial@14c30000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x14c30000 0x100>; + interrupts = <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_peric CLK_PCLK_UART2>, + <&cmu_peric CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_bus>; + status = "disabled"; + }; + + spi_0: spi@14d20000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d20000 0x100>; + interrupts = <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma0 9>, <&pdma0 8>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI0>, + <&cmu_peric CLK_SCLK_SPI0>, + <&cmu_peric CLK_SCLK_IOCLK_SPI0>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + num-cs = <1>; + status = "disabled"; + }; + + spi_1: spi@14d30000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d30000 0x100>; + interrupts = <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma0 11>, <&pdma0 10>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI1>, + <&cmu_peric CLK_SCLK_SPI1>, + <&cmu_peric CLK_SCLK_IOCLK_SPI1>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + num-cs = <1>; + status = "disabled"; + }; + + spi_2: spi@14d40000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d40000 0x100>; + interrupts = <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma0 13>, <&pdma0 12>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI2>, + <&cmu_peric CLK_SCLK_SPI2>, + <&cmu_peric CLK_SCLK_IOCLK_SPI2>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus>; + num-cs = <1>; + status = "disabled"; + }; + + spi_3: spi@14d50000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d50000 0x100>; + interrupts = <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma0 23>, <&pdma0 22>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI3>, + <&cmu_peric CLK_SCLK_SPI3>, + <&cmu_peric CLK_SCLK_IOCLK_SPI3>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_bus>; + num-cs = <1>; + status = "disabled"; + }; + + spi_4: spi@14d00000 { + compatible = "samsung,exynos5433-spi"; + reg = <0x14d00000 0x100>; + interrupts = <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&pdma0 25>, <&pdma0 24>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_peric CLK_PCLK_SPI4>, + <&cmu_peric CLK_SCLK_SPI4>, + <&cmu_peric CLK_SCLK_IOCLK_SPI4>; + clock-names = "spi", "spi_busclk0", "spi_ioclk"; + samsung,spi-src-clk = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi4_bus>; + num-cs = <1>; + status = "disabled"; + }; + + adc: adc@14d10000 { + compatible = "samsung,exynos7-adc"; + reg = <0x14d10000 0x100>; + interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "adc"; + clocks = <&cmu_peric CLK_PCLK_ADCIF>; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + + pwm: pwm@14dd0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x14dd0000 0x100>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + clocks = <&cmu_peric CLK_PCLK_PWM>; + clock-names = "timers"; + #pwm-cells = <3>; + status = "disabled"; + }; + + hsi2c_0: hsi2c@14e40000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e40000 0x1000>; + interrupts = <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c0_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C0>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_1: hsi2c@14e50000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e50000 0x1000>; + interrupts = <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c1_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C1>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_2: hsi2c@14e60000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e60000 0x1000>; + interrupts = <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c2_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C2>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_3: hsi2c@14e70000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e70000 0x1000>; + interrupts = <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c3_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C3>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_4: hsi2c@14ec0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14ec0000 0x1000>; + interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c4_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C4>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_5: hsi2c@14ed0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14ed0000 0x1000>; + interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c5_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C5>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_6: hsi2c@14ee0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14ee0000 0x1000>; + interrupts = <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c6_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C6>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_7: hsi2c@14ef0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14ef0000 0x1000>; + interrupts = <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c7_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C7>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_8: hsi2c@14d90000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14d90000 0x1000>; + interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c8_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C8>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_9: hsi2c@14da0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14da0000 0x1000>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c9_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C9>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_10: hsi2c@14de0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14de0000 0x1000>; + interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c10_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C10>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_11: hsi2c@14df0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14df0000 0x1000>; + interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c11_bus>; + clocks = <&cmu_peric CLK_PCLK_HSI2C11>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + usbdrd30: usb@15400000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, + <&cmu_fsys CLK_SCLK_USBDRD30>; + clock-names = "usbdrd30", "usbdrd30_susp_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + dwc3@15400000 { + compatible = "snps,dwc3"; + reg = <0x15400000 0x10000>; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbdrd30_phy 0>, <&usbdrd30_phy 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usbdrd30_phy: phy@15500000 { + compatible = "samsung,exynos5433-usbdrd-phy"; + reg = <0x15500000 0x100>; + clocks = <&cmu_fsys CLK_ACLK_USBDRD30>, <&xxti>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK>, + <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK>, + <&cmu_fsys CLK_SCLK_USBDRD30>; + clock-names = "phy", "ref", "phy_utmi", "phy_pipe", + "itp"; + #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; + status = "disabled"; + }; + + usbhost30_phy: phy@15580000 { + compatible = "samsung,exynos5433-usbdrd-phy"; + reg = <0x15580000 0x100>; + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, <&xxti>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK>, + <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK>, + <&cmu_fsys CLK_SCLK_USBHOST30>; + clock-names = "phy", "ref", "phy_utmi", "phy_pipe", + "itp"; + #phy-cells = <1>; + samsung,pmu-syscon = <&pmu_system_controller>; + status = "disabled"; + }; + + usbhost30: usb@15a00000 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&cmu_fsys CLK_ACLK_USBHOST30>, + <&cmu_fsys CLK_SCLK_USBHOST30>; + clock-names = "usbdrd30", "usbdrd30_susp_clk"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + status = "disabled"; + + usbdrd_dwc3_0: dwc3@15a00000 { + compatible = "snps,dwc3"; + reg = <0x15a00000 0x10000>; + interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>; + phys = <&usbhost30_phy 0>, <&usbhost30_phy 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + mshc_0: mshc@15540000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15540000 0x2000>; + clocks = <&cmu_fsys CLK_ACLK_MMC0>, + <&cmu_fsys CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mshc_1: mshc@15550000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15550000 0x2000>; + clocks = <&cmu_fsys CLK_ACLK_MMC1>, + <&cmu_fsys CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mshc_2: mshc@15560000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15560000 0x2000>; + clocks = <&cmu_fsys CLK_ACLK_MMC2>, + <&cmu_fsys CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pdma0: pdma@15610000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x15610000 0x1000>; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_fsys CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@15600000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x15600000 0x1000>; + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_fsys CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + + audio-subsystem@11400000 { + compatible = "samsung,exynos5433-lpass"; + reg = <0x11400000 0x100>, <0x11500000 0x08>; + samsung,pmu-syscon = <&pmu_system_controller>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + adma: adma@11420000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11420000 0x1000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_aud CLK_ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + i2s0: i2s0@11440000 { + compatible = "samsung,exynos7-i2s"; + reg = <0x11440000 0x100>; + dmas = <&adma 0 &adma 2>; + dma-names = "tx", "rx"; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cmu_aud CLK_PCLK_AUD_I2S>, + <&cmu_aud CLK_SCLK_AUD_I2S>, + <&cmu_aud CLK_SCLK_I2S_BCLK>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + status = "disabled"; + }; + + serial_3: serial@11460000 { + compatible = "samsung,exynos5433-uart"; + reg = <0x11460000 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu_aud CLK_PCLK_AUD_UART>, + <&cmu_aud CLK_SCLK_AUD_UART>; + clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart_aud_bus>; + status = "disabled"; + }; + }; + }; + + timer: timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; + }; +}; + +#include "exynos5433-pinctrl.dtsi" +#include "exynos5433-tmu.dtsi" diff --git a/dts/src/arm64/exynos/exynos7-pinctrl.dtsi b/dts/src/arm64/exynos/exynos7-pinctrl.dtsi index f77ddaf21d..82321984e1 100644 --- a/dts/src/arm64/exynos/exynos7-pinctrl.dtsi +++ b/dts/src/arm64/exynos/exynos7-pinctrl.dtsi @@ -20,8 +20,14 @@ interrupt-controller; interrupt-parent = <&gic>; #interrupt-cells = <2>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; }; gpa1: gpa1 { @@ -31,8 +37,14 @@ interrupt-controller; interrupt-parent = <&gic>; #interrupt-cells = <2>; - interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; }; gpa2: gpa2 { diff --git a/dts/src/arm64/exynos/exynos7.dtsi b/dts/src/arm64/exynos/exynos7.dtsi index 6328a66ed9..80aa60e382 100644 --- a/dts/src/arm64/exynos/exynos7.dtsi +++ b/dts/src/arm64/exynos/exynos7.dtsi @@ -35,28 +35,28 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu_atlas0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a57", "arm,armv8"; reg = <0x0>; enable-method = "psci"; }; - cpu@1 { + cpu_atlas1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a57", "arm,armv8"; reg = <0x1>; enable-method = "psci"; }; - cpu@2 { + cpu_atlas2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a57", "arm,armv8"; reg = <0x2>; enable-method = "psci"; }; - cpu@3 { + cpu_atlas3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a57", "arm,armv8"; reg = <0x3>; @@ -106,7 +106,7 @@ pdma0: pdma@10E10000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10E10000 0x1000>; - interrupts = <0 225 0>; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_fsys0 ACLK_PDMA0>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -117,7 +117,7 @@ pdma1: pdma@10EB0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x10EB0000 0x1000>; - interrupts = <0 226 0>; + interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_fsys0 ACLK_PDMA1>; clock-names = "apb_pclk"; #dma-cells = <1>; @@ -220,7 +220,7 @@ serial_0: serial@13630000 { compatible = "samsung,exynos4210-uart"; reg = <0x13630000 0x100>; - interrupts = <0 440 0>; + interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric0 PCLK_UART0>, <&clock_peric0 SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; @@ -230,7 +230,7 @@ serial_1: serial@14c20000 { compatible = "samsung,exynos4210-uart"; reg = <0x14c20000 0x100>; - interrupts = <0 456 0>; + interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric1 PCLK_UART1>, <&clock_peric1 SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; @@ -240,7 +240,7 @@ serial_2: serial@14c30000 { compatible = "samsung,exynos4210-uart"; reg = <0x14c30000 0x100>; - interrupts = <0 457 0>; + interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric1 PCLK_UART2>, <&clock_peric1 SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; @@ -250,7 +250,7 @@ serial_3: serial@14c40000 { compatible = "samsung,exynos4210-uart"; reg = <0x14c40000 0x100>; - interrupts = <0 458 0>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric1 PCLK_UART3>, <&clock_peric1 SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; @@ -264,62 +264,62 @@ wakeup-interrupt-controller { compatible = "samsung,exynos7-wakeup-eint"; interrupt-parent = <&gic>; - interrupts = <0 16 0>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; }; }; pinctrl_bus0: pinctrl@13470000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x13470000 0x1000>; - interrupts = <0 383 0>; + interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_nfc: pinctrl@14cd0000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x14cd0000 0x1000>; - interrupts = <0 473 0>; + interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_touch: pinctrl@14ce0000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x14ce0000 0x1000>; - interrupts = <0 474 0>; + interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_ff: pinctrl@14c90000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x14c90000 0x1000>; - interrupts = <0 475 0>; + interrupts = <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_ese: pinctrl@14ca0000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x14ca0000 0x1000>; - interrupts = <0 476 0>; + interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_fsys0: pinctrl@10e60000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x10e60000 0x1000>; - interrupts = <0 221 0>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_fsys1: pinctrl@15690000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x15690000 0x1000>; - interrupts = <0 203 0>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; }; pinctrl_bus1: pinctrl@14870000 { compatible = "samsung,exynos7-pinctrl"; reg = <0x14870000 0x1000>; - interrupts = <0 384 0>; + interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; }; hsi2c_0: hsi2c@13640000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x13640000 0x1000>; - interrupts = <0 441 0>; + interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -332,7 +332,7 @@ hsi2c_1: hsi2c@13650000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x13650000 0x1000>; - interrupts = <0 442 0>; + interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -345,7 +345,7 @@ hsi2c_2: hsi2c@14e60000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x14e60000 0x1000>; - interrupts = <0 459 0>; + interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -358,7 +358,7 @@ hsi2c_3: hsi2c@14e70000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x14e70000 0x1000>; - interrupts = <0 460 0>; + interrupts = <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -371,7 +371,7 @@ hsi2c_4: hsi2c@13660000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x13660000 0x1000>; - interrupts = <0 443 0>; + interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -384,7 +384,7 @@ hsi2c_5: hsi2c@13670000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x13670000 0x1000>; - interrupts = <0 444 0>; + interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -397,7 +397,7 @@ hsi2c_6: hsi2c@14e00000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x14e00000 0x1000>; - interrupts = <0 461 0>; + interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -410,7 +410,7 @@ hsi2c_7: hsi2c@13e10000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x13e10000 0x1000>; - interrupts = <0 462 0>; + interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -423,7 +423,7 @@ hsi2c_8: hsi2c@14e20000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x14e20000 0x1000>; - interrupts = <0 463 0>; + interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -436,7 +436,7 @@ hsi2c_9: hsi2c@13680000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x13680000 0x1000>; - interrupts = <0 445 0>; + interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -449,7 +449,7 @@ hsi2c_10: hsi2c@13690000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x13690000 0x1000>; - interrupts = <0 446 0>; + interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -462,7 +462,7 @@ hsi2c_11: hsi2c@136a0000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x136a0000 0x1000>; - interrupts = <0 447 0>; + interrupts = <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -472,6 +472,16 @@ status = "disabled"; }; + arm-pmu { + compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu_atlas0>, <&cpu_atlas1>, + <&cpu_atlas2>, <&cpu_atlas3>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 @@ -499,7 +509,8 @@ rtc: rtc@10590000 { compatible = "samsung,s3c6410-rtc"; reg = <0x10590000 0x100>; - interrupts = <0 355 0>, <0 356 0>; + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_ccore PCLK_RTC>; clock-names = "rtc"; status = "disabled"; @@ -508,7 +519,7 @@ watchdog: watchdog@101d0000 { compatible = "samsung,exynos7-wdt"; reg = <0x101d0000 0x100>; - interrupts = <0 110 0>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peris PCLK_WDT>; clock-names = "watchdog"; samsung,syscon-phandle = <&pmu_system_controller>; @@ -517,7 +528,7 @@ mmc_0: mmc@15740000 { compatible = "samsung,exynos7-dw-mshc-smu"; - interrupts = <0 201 0>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x15740000 0x2000>; @@ -530,7 +541,7 @@ mmc_1: mmc@15750000 { compatible = "samsung,exynos7-dw-mshc"; - interrupts = <0 202 0>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x15750000 0x2000>; @@ -543,7 +554,7 @@ mmc_2: mmc@15560000 { compatible = "samsung,exynos7-dw-mshc-smu"; - interrupts = <0 216 0>; + interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; reg = <0x15560000 0x2000>; @@ -557,7 +568,7 @@ adc: adc@13620000 { compatible = "samsung,exynos7-adc"; reg = <0x13620000 0x100>; - interrupts = <0 448 0>; + interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peric0 PCLK_ADCIF>; clock-names = "adc"; #io-channel-cells = <1>; @@ -577,7 +588,7 @@ tmuctrl_0: tmu@10060000 { compatible = "samsung,exynos7-tmu"; reg = <0x10060000 0x200>; - interrupts = <0 108 0>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clock_peris PCLK_TMU>, <&clock_peris SCLK_TMU>; clock-names = "tmu_apbif", "tmu_sclk"; diff --git a/dts/src/arm64/freescale/fsl-ls1043a-qds.dts b/dts/src/arm64/freescale/fsl-ls1043a-qds.dts index dd9e91941d..0989d635b5 100644 --- a/dts/src/arm64/freescale/fsl-ls1043a-qds.dts +++ b/dts/src/arm64/freescale/fsl-ls1043a-qds.dts @@ -45,7 +45,7 @@ */ /dts-v1/; -/include/ "fsl-ls1043a.dtsi" +#include "fsl-ls1043a.dtsi" / { model = "LS1043A QDS Board"; diff --git a/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts index d2313e05fd..c37110bc15 100644 --- a/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-ls1043a-rdb.dts @@ -45,7 +45,7 @@ */ /dts-v1/; -/include/ "fsl-ls1043a.dtsi" +#include "fsl-ls1043a.dtsi" / { model = "LS1043A RDB Board"; diff --git a/dts/src/arm64/freescale/fsl-ls1043a.dtsi b/dts/src/arm64/freescale/fsl-ls1043a.dtsi index 97d331ec25..ec13a6ecb7 100644 --- a/dts/src/arm64/freescale/fsl-ls1043a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls1043a.dtsi @@ -44,6 +44,8 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/thermal/thermal.h> + / { compatible = "fsl,ls1043a"; interrupt-parent = <&gic>; @@ -66,6 +68,7 @@ reg = <0x0>; clocks = <&clockgen 1 0>; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu1: cpu@1 { @@ -255,6 +258,81 @@ big-endian; }; + tmu: tmu@1f00000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f00000 0x0 0x10000>; + interrupts = <0 33 0x4>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; + fsl,tmu-calibration = <0x00000000 0x00000026 + 0x00000001 0x0000002d + 0x00000002 0x00000032 + 0x00000003 0x00000039 + 0x00000004 0x0000003f + 0x00000005 0x00000046 + 0x00000006 0x0000004d + 0x00000007 0x00000054 + 0x00000008 0x0000005a + 0x00000009 0x00000061 + 0x0000000a 0x0000006a + 0x0000000b 0x00000071 + + 0x00010000 0x00000025 + 0x00010001 0x0000002c + 0x00010002 0x00000035 + 0x00010003 0x0000003d + 0x00010004 0x00000045 + 0x00010005 0x0000004e + 0x00010006 0x00000057 + 0x00010007 0x00000061 + 0x00010008 0x0000006b + 0x00010009 0x00000076 + + 0x00020000 0x00000029 + 0x00020001 0x00000033 + 0x00020002 0x0000003d + 0x00020003 0x00000049 + 0x00020004 0x00000056 + 0x00020005 0x00000061 + 0x00020006 0x0000006d + + 0x00030000 0x00000021 + 0x00030001 0x0000002a + 0x00030002 0x0000003c + 0x00030003 0x0000004e>; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 3>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + dspi0: dspi@2100000 { compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; #address-cells = <1>; diff --git a/dts/src/arm64/freescale/fsl-ls1046a-qds.dts b/dts/src/arm64/freescale/fsl-ls1046a-qds.dts new file mode 100644 index 0000000000..290e5b0144 --- /dev/null +++ b/dts/src/arm64/freescale/fsl-ls1046a-qds.dts @@ -0,0 +1,212 @@ +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * + * Copyright 2016, Freescale Semiconductor, Inc. + * + * Shaohui Xie <Shaohui.Xie@nxp.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "fsl-ls1046a.dtsi" + +/ { + model = "LS1046A QDS Board"; + compatible = "fsl,ls1046a-qds", "fsl,ls1046a"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + serial0 = &duart0; + serial1 = &duart1; + serial2 = &duart2; + serial3 = &duart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&dspi { + bus-num = <0>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a11", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst25wf040b", "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <1>; + spi-max-frequency = <10000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "en25s64", "jedec,spi-nor"; + spi-cpol; + spi-cpha; + reg = <2>; + spi-max-frequency = <10000000>; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + pca9547@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + /* IRQ10_B */ + interrupts = <0 150 0x4>; + }; + + eeprom@56 { + compatible = "atmel,24c512"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c512"; + reg = <0x57>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461a"; + reg = <0x4c>; + }; + }; + }; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NOR, NAND Flashes and FPGA on board */ + ranges = <0x0 0x0 0x0 0x60000000 0x08000000 + 0x1 0x0 0x0 0x7e800000 0x00010000 + 0x2 0x0 0x0 0x7fb00000 0x00000100>; + status = "okay"; + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + }; + + fpga: board-control@2,0 { + compatible = "fsl,ls1046aqds-fpga", "fsl,fpga-qixis"; + reg = <0x2 0x0 0x0000100>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&qspi { + num-cs = <2>; + bus-num = <0>; + status = "okay"; + + qflash0: s25fl128s@0 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; diff --git a/dts/src/arm64/freescale/fsl-ls1046a-rdb.dts b/dts/src/arm64/freescale/fsl-ls1046a-rdb.dts new file mode 100644 index 0000000000..d1ccc000d0 --- /dev/null +++ b/dts/src/arm64/freescale/fsl-ls1046a-rdb.dts @@ -0,0 +1,150 @@ +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * + * Copyright 2016, Freescale Semiconductor, Inc. + * + * Mingkai Hu <mingkai.hu@nxp.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "fsl-ls1046a.dtsi" + +/ { + model = "LS1046A RDB Board"; + compatible = "fsl,ls1046a-rdb", "fsl,ls1046a"; + + aliases { + serial0 = &duart0; + serial1 = &duart1; + serial2 = &duart2; + serial3 = &duart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + eeprom@56 { + compatible = "atmel,24c512"; + reg = <0x52>; + }; + + eeprom@57 { + compatible = "atmel,24c512"; + reg = <0x53>; + }; +}; + +&i2c3 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NAND Flashe and CPLD on board */ + ranges = <0x0 0x0 0x0 0x7e800000 0x00010000 + 0x2 0x0 0x0 0x7fb00000 0x00000100>; + status = "okay"; + + nand@0,0 { + compatible = "fsl,ifc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x10000>; + }; + + cpld: board-control@2,0 { + compatible = "fsl,ls1046ardb-cpld"; + reg = <0x2 0x0 0x0000100>; + }; +}; + +&qspi { + num-cs = <2>; + bus-num = <0>; + status = "okay"; + + qflash0: s25fs512s@0 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <0>; + }; + + qflash1: s25fs512s@1 { + compatible = "spansion,m25p80"; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <20000000>; + reg = <1>; + }; +}; diff --git a/dts/src/arm64/freescale/fsl-ls1046a.dtsi b/dts/src/arm64/freescale/fsl-ls1046a.dtsi new file mode 100644 index 0000000000..38806ca538 --- /dev/null +++ b/dts/src/arm64/freescale/fsl-ls1046a.dtsi @@ -0,0 +1,515 @@ +/* + * Device Tree Include file for Freescale Layerscape-1046A family SoC. + * + * Copyright 2016, Freescale Semiconductor, Inc. + * + * Mingkai Hu <mingkai.hu@nxp.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "fsl,ls1046a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + crypto = &crypto; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0>; + clocks = <&clockgen 1 0>; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x1>; + clocks = <&clockgen 1 0>; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x2>; + clocks = <&clockgen 1 0>; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x3>; + clocks = <&clockgen 1 0>; + next-level-cache = <&l2>; + cpu-idle-states = <&CPU_PH20>; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + idle-states { + /* + * PSCI node is not added default, U-boot will add missing + * parts if it determines to use PSCI. + */ + entry-method = "arm,psci"; + + CPU_PH20: cpu-ph20 { + compatible = "arm,idle-state"; + idle-state-name = "PH20"; + arm,psci-suspend-param = <0x00010000>; + entry-latency-us = <1000>; + exit-latency-us = <1000>; + min-residency-us = <3000>; + }; + }; + + memory@80000000 { + device_type = "memory"; + }; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + reboot { + compatible ="syscon-reboot"; + regmap = <&dcfg>; + offset = <0xb0>; + mask = <0x02>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xf) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xf) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xf) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xf) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + + gic: interrupt-controller@1400000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x1410000 0 0x10000>, /* GICD */ + <0x0 0x1420000 0 0x20000>, /* GICC */ + <0x0 0x1440000 0 0x20000>, /* GICH */ + <0x0 0x1460000 0 0x20000>; /* GICV */ + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ddr: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1080000 0x0 0x1000>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + big-endian; + }; + + ifc: ifc@1530000 { + compatible = "fsl,ifc", "simple-bus"; + reg = <0x0 0x1530000 0x0 0x10000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + }; + + qspi: quadspi@1550000 { + compatible = "fsl,ls1021a-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x1550000 0x0 0x10000>, + <0x0 0x40000000 0x0 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "qspi_en", "qspi"; + clocks = <&clockgen 4 1>, <&clockgen 4 1>; + big-endian; + fsl,qspi-has-second-chip; + status = "disabled"; + }; + + esdhc: esdhc@1560000 { + compatible = "fsl,esdhc"; + reg = <0x0 0x1560000 0x0 0x10000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + big-endian; + bus-width = <4>; + }; + + scfg: scfg@1570000 { + compatible = "fsl,ls1046a-scfg", "syscon"; + reg = <0x0 0x1570000 0x0 0x10000>; + big-endian; + }; + + crypto: crypto@1700000 { + compatible = "fsl,sec-v5.4", "fsl,sec-v5.0", + "fsl,sec-v4.0"; + fsl,sec-era = <8>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x1700000 0x100000>; + reg = <0x00 0x1700000 0x0 0x100000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.4-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.4-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.4-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.4-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + dcfg: dcfg@1ee0000 { + compatible = "fsl,ls1046a-dcfg", "syscon"; + reg = <0x0 0x1ee0000 0x0 0x10000>; + big-endian; + }; + + clockgen: clocking@1ee1000 { + compatible = "fsl,ls1046a-clockgen"; + reg = <0x0 0x1ee1000 0x0 0x1000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + dspi: dspi@2100000 { + compatible = "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; + clocks = <&clockgen 4 1>; + spi-num-chipselects = <5>; + big-endian; + status = "disabled"; + }; + + i2c0: i2c@2180000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + dmas = <&edma0 1 39>, + <&edma0 1 38>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2c1: i2c@2190000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c2: i2c@21a0000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x21a0000 0x0 0x10000>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + i2c3: i2c@21b0000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x21b0000 0x0 0x10000>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + status = "disabled"; + }; + + duart0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0500 0x0 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + }; + + duart1: serial@21c0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x00 0x21c0600 0x0 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + }; + + duart2: serial@21d0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21d0500 0x0 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + }; + + duart3: serial@21d0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21d0600 0x0 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + }; + + gpio0: gpio@2300000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@2310000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2320000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@2330000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2330000 0x0 0x10000>; + interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + lpuart0: serial@2950000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2950000 0x0 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 0>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart1: serial@2960000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2960000 0x0 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart2: serial@2970000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2970000 0x0 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart3: serial@2980000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2980000 0x0 0x1000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart4: serial@2990000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2990000 0x0 0x1000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart5: serial@29a0000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x29a0000 0x0 0x1000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + wdog0: watchdog@2ad0000 { + compatible = "fsl,imx21-wdt"; + reg = <0x0 0x2ad0000 0x0 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + big-endian; + }; + + edma0: edma@2c00000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x0 0x2c00000 0x0 0x10000>, + <0x0 0x2c10000 0x0 0x10000>, + <0x0 0x2c20000 0x0 0x10000>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; + dma-channels = <32>; + big-endian; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clockgen 4 1>, + <&clockgen 4 1>; + }; + + usb0: usb@2f00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x2f00000 0x0 0x10000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + }; + + usb1: usb@3000000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3000000 0x0 0x10000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + }; + + usb2: usb@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1046a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 1>; + }; + }; +}; diff --git a/dts/src/arm64/freescale/fsl-ls2080a-qds.dts b/dts/src/arm64/freescale/fsl-ls2080a-qds.dts index b0dd010979..8bc1f8f6fc 100644 --- a/dts/src/arm64/freescale/fsl-ls2080a-qds.dts +++ b/dts/src/arm64/freescale/fsl-ls2080a-qds.dts @@ -46,7 +46,7 @@ /dts-v1/; -/include/ "fsl-ls2080a.dtsi" +#include "fsl-ls2080a.dtsi" / { model = "Freescale Layerscape 2080a QDS Board"; diff --git a/dts/src/arm64/freescale/fsl-ls2080a-rdb.dts b/dts/src/arm64/freescale/fsl-ls2080a-rdb.dts index ad0ebb8a19..265e0a8b10 100644 --- a/dts/src/arm64/freescale/fsl-ls2080a-rdb.dts +++ b/dts/src/arm64/freescale/fsl-ls2080a-rdb.dts @@ -46,7 +46,7 @@ /dts-v1/; -/include/ "fsl-ls2080a.dtsi" +#include "fsl-ls2080a.dtsi" / { model = "Freescale Layerscape 2080a RDB Board"; diff --git a/dts/src/arm64/freescale/fsl-ls2080a-simu.dts b/dts/src/arm64/freescale/fsl-ls2080a-simu.dts index 505d038078..290604b0a6 100644 --- a/dts/src/arm64/freescale/fsl-ls2080a-simu.dts +++ b/dts/src/arm64/freescale/fsl-ls2080a-simu.dts @@ -46,7 +46,7 @@ /dts-v1/; -/include/ "fsl-ls2080a.dtsi" +#include "fsl-ls2080a.dtsi" / { model = "Freescale Layerscape 2080a software Simulator model"; diff --git a/dts/src/arm64/freescale/fsl-ls2080a.dtsi b/dts/src/arm64/freescale/fsl-ls2080a.dtsi index 7f0dc13b40..e5935f2884 100644 --- a/dts/src/arm64/freescale/fsl-ls2080a.dtsi +++ b/dts/src/arm64/freescale/fsl-ls2080a.dtsi @@ -44,6 +44,8 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/thermal/thermal.h> + / { compatible = "fsl,ls2080a"; interrupt-parent = <&gic>; @@ -62,15 +64,16 @@ */ /* We have 4 clusters having 2 Cortex-A57 cores each */ - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x0>; clocks = <&clockgen 1 0>; next-level-cache = <&cluster0_l2>; + #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x1>; @@ -78,15 +81,16 @@ next-level-cache = <&cluster0_l2>; }; - cpu@100 { + cpu2: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x100>; clocks = <&clockgen 1 1>; next-level-cache = <&cluster1_l2>; + #cooling-cells = <2>; }; - cpu@101 { + cpu3: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x101>; @@ -94,15 +98,16 @@ next-level-cache = <&cluster1_l2>; }; - cpu@200 { + cpu4: cpu@200 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x200>; clocks = <&clockgen 1 2>; next-level-cache = <&cluster2_l2>; + #cooling-cells = <2>; }; - cpu@201 { + cpu5: cpu@201 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x201>; @@ -110,15 +115,16 @@ next-level-cache = <&cluster2_l2>; }; - cpu@300 { + cpu6: cpu@300 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x300>; clocks = <&clockgen 1 3>; next-level-cache = <&cluster3_l2>; + #cooling-cells = <2>; }; - cpu@301 { + cpu7: cpu@301 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x301>; @@ -216,6 +222,106 @@ clocks = <&sysclk>; }; + dcfg: dcfg@1e00000 { + compatible = "fsl,ls2080a-dcfg", "syscon"; + reg = <0x0 0x1e00000 0x0 0x10000>; + little-endian; + }; + + tmu: tmu@1f80000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f80000 0x0 0x10000>; + interrupts = <0 23 0x4>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; + fsl,tmu-calibration = <0x00000000 0x00000026 + 0x00000001 0x0000002d + 0x00000002 0x00000032 + 0x00000003 0x00000039 + 0x00000004 0x0000003f + 0x00000005 0x00000046 + 0x00000006 0x0000004d + 0x00000007 0x00000054 + 0x00000008 0x0000005a + 0x00000009 0x00000061 + 0x0000000a 0x0000006a + 0x0000000b 0x00000071 + + 0x00010000 0x00000025 + 0x00010001 0x0000002c + 0x00010002 0x00000035 + 0x00010003 0x0000003d + 0x00010004 0x00000045 + 0x00010005 0x0000004e + 0x00010006 0x00000057 + 0x00010007 0x00000061 + 0x00010008 0x0000006b + 0x00010009 0x00000076 + + 0x00020000 0x00000029 + 0x00020001 0x00000033 + 0x00020002 0x0000003d + 0x00020003 0x00000049 + 0x00020004 0x00000056 + 0x00020005 0x00000061 + 0x00020006 0x0000006d + + 0x00030000 0x00000021 + 0x00030001 0x0000002a + 0x00030002 0x0000003c + 0x00030003 0x0000004e>; + little-endian; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 4>; + + trips { + cpu_alert: cpu-alert { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert>; + cooling-device = + <&cpu2 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map2 { + trip = <&cpu_alert>; + cooling-device = + <&cpu4 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map3 { + trip = <&cpu_alert>; + cooling-device = + <&cpu6 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + serial0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>; diff --git a/dts/src/arm64/hisilicon/hi6220.dtsi b/dts/src/arm64/hisilicon/hi6220.dtsi index 17839db585..470461ddd4 100644 --- a/dts/src/arm64/hisilicon/hi6220.dtsi +++ b/dts/src/arm64/hisilicon/hi6220.dtsi @@ -364,6 +364,7 @@ reg = <0x0 0xf7010000 0x0 0x27c>; #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; #gpio-range-cells = <3>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <7>; @@ -402,6 +403,7 @@ reg = <0x0 0xf7010800 0x0 0x28c>; #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; }; @@ -410,6 +412,7 @@ reg = <0x0 0xf8001800 0x0 0x78>; #address-cells = <1>; #size-cells = <1>; + #pinctrl-cells = <1>; pinctrl-single,register-width = <32>; }; @@ -747,7 +750,6 @@ clocks = <&sys_ctrl HI6220_USBOTG_HCLK>; clock-names = "otg"; dr_mode = "otg"; - g-use-dma; g-rx-fifo-size = <512>; g-np-tx-fifo-size = <128>; g-tx-fifo-size = <128 128 128 128 128 128>; diff --git a/dts/src/arm64/hisilicon/hip06-d03.dts b/dts/src/arm64/hisilicon/hip06-d03.dts index f54b283596..7c4114a677 100644 --- a/dts/src/arm64/hisilicon/hip06-d03.dts +++ b/dts/src/arm64/hisilicon/hip06-d03.dts @@ -41,18 +41,10 @@ status = "ok"; }; -&sas0 { - status = "ok"; -}; - &sas1 { status = "ok"; }; -&sas2 { - status = "ok"; -}; - &usb_ohci { status = "ok"; }; diff --git a/dts/src/arm64/hisilicon/hip06.dtsi b/dts/src/arm64/hisilicon/hip06.dtsi index b548763366..a049b64f21 100644 --- a/dts/src/arm64/hisilicon/hip06.dtsi +++ b/dts/src/arm64/hisilicon/hip06.dtsi @@ -318,11 +318,17 @@ #size-cells = <2>; ranges; + refclk: refclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + usb_ohci: ohci@a7030000 { compatible = "generic-ohci"; reg = <0x0 0xa7030000 0x0 0x10000>; interrupt-parent = <&mbigen_usb>; - interrupts = <64 4>; + interrupts = <640 4>; dma-coherent; status = "disabled"; }; @@ -331,7 +337,7 @@ compatible = "generic-ehci"; reg = <0x0 0xa7020000 0x0 0x10000>; interrupt-parent = <&mbigen_usb>; - interrupts = <65 4>; + interrupts = <641 4>; dma-coherent; status = "disabled"; }; @@ -508,7 +514,7 @@ }; }; - eth0: ethernet@4{ + eth0: ethernet-4{ compatible = "hisilicon,hns-nic-v2"; ae-handle = <&dsaf0>; port-idx-in-ae = <4>; @@ -517,7 +523,7 @@ dma-coherent; }; - eth1: ethernet@5{ + eth1: ethernet-5{ compatible = "hisilicon,hns-nic-v2"; ae-handle = <&dsaf0>; port-idx-in-ae = <5>; @@ -526,7 +532,7 @@ dma-coherent; }; - eth2: ethernet@0{ + eth2: ethernet-0{ compatible = "hisilicon,hns-nic-v2"; ae-handle = <&dsaf0>; port-idx-in-ae = <0>; @@ -535,7 +541,7 @@ dma-coherent; }; - eth3: ethernet@1{ + eth3: ethernet-1{ compatible = "hisilicon,hns-nic-v2"; ae-handle = <&dsaf0>; port-idx-in-ae = <1>; @@ -552,6 +558,7 @@ ctrl-reset-reg = <0xa60>; ctrl-reset-sts-reg = <0x5a30>; ctrl-clock-ena-reg = <0x338>; + clocks = <&refclk 0>; queue-count = <16>; phy-count = <8>; dma-coherent; @@ -590,10 +597,11 @@ reg = <0 0xa2000000 0 0x10000>; sas-addr = [50 01 88 20 16 00 00 00]; hisilicon,sas-syscon = <&pcie_subctl>; - am-max-trans; + hip06-sas-v2-quirk-amt; ctrl-reset-reg = <0xa18>; ctrl-reset-sts-reg = <0x5a0c>; ctrl-clock-ena-reg = <0x318>; + clocks = <&refclk 0>; queue-count = <16>; phy-count = <8>; dma-coherent; @@ -635,6 +643,7 @@ ctrl-reset-reg = <0xae0>; ctrl-reset-sts-reg = <0x5a70>; ctrl-clock-ena-reg = <0x3a8>; + clocks = <&refclk 0>; queue-count = <16>; phy-count = <9>; dma-coherent; diff --git a/dts/src/arm64/hisilicon/hip07-d05.dts b/dts/src/arm64/hisilicon/hip07-d05.dts new file mode 100644 index 0000000000..e058442305 --- /dev/null +++ b/dts/src/arm64/hisilicon/hip07-d05.dts @@ -0,0 +1,66 @@ +/** + * dts file for Hisilicon D05 Development Board + * + * Copyright (C) 2016 Hisilicon Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + */ + +/dts-v1/; + +#include "hip07.dtsi" + +/ { + model = "Hisilicon Hip07 D05 Development Board"; + compatible = "hisilicon,hip07-d05"; + + /* the mem node will be updated by UEFI. */ + memory@0 { + device_type = "memory"; + reg = <0x0 0x00000000 0x0 0x40000000>; + numa-node-id = <0>; + }; + + distance-map { + compatible = "numa-distance-map-v1"; + distance-matrix = <0 0 10>, + <0 1 15>, + <0 2 20>, + <0 3 25>, + <1 0 15>, + <1 1 10>, + <1 2 25>, + <1 3 30>, + <2 0 20>, + <2 1 25>, + <2 2 10>, + <2 3 15>, + <3 0 25>, + <3 1 30>, + <3 2 15>, + <3 3 10>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "ok"; +}; + +&usb_ohci { + status = "ok"; +}; + +&usb_ehci { + status = "ok"; +}; diff --git a/dts/src/arm64/hisilicon/hip07.dtsi b/dts/src/arm64/hisilicon/hip07.dtsi new file mode 100644 index 0000000000..5144eb1c17 --- /dev/null +++ b/dts/src/arm64/hisilicon/hip07.dtsi @@ -0,0 +1,1059 @@ +/** + * dts file for Hisilicon D05 Development Board + * + * Copyright (C) 2016 Hisilicon Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "hisilicon,hip07-d05"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + + cluster2 { + core0 { + cpu = <&cpu8>; + }; + core1 { + cpu = <&cpu9>; + }; + core2 { + cpu = <&cpu10>; + }; + core3 { + cpu = <&cpu11>; + }; + }; + + cluster3 { + core0 { + cpu = <&cpu12>; + }; + core1 { + cpu = <&cpu13>; + }; + core2 { + cpu = <&cpu14>; + }; + core3 { + cpu = <&cpu15>; + }; + }; + + cluster4 { + core0 { + cpu = <&cpu16>; + }; + core1 { + cpu = <&cpu17>; + }; + core2 { + cpu = <&cpu18>; + }; + core3 { + cpu = <&cpu19>; + }; + }; + + cluster5 { + core0 { + cpu = <&cpu20>; + }; + core1 { + cpu = <&cpu21>; + }; + core2 { + cpu = <&cpu22>; + }; + core3 { + cpu = <&cpu23>; + }; + }; + + cluster6 { + core0 { + cpu = <&cpu24>; + }; + core1 { + cpu = <&cpu25>; + }; + core2 { + cpu = <&cpu26>; + }; + core3 { + cpu = <&cpu27>; + }; + }; + + cluster7 { + core0 { + cpu = <&cpu28>; + }; + core1 { + cpu = <&cpu29>; + }; + core2 { + cpu = <&cpu30>; + }; + core3 { + cpu = <&cpu31>; + }; + }; + + cluster8 { + core0 { + cpu = <&cpu32>; + }; + core1 { + cpu = <&cpu33>; + }; + core2 { + cpu = <&cpu34>; + }; + core3 { + cpu = <&cpu35>; + }; + }; + + cluster9 { + core0 { + cpu = <&cpu36>; + }; + core1 { + cpu = <&cpu37>; + }; + core2 { + cpu = <&cpu38>; + }; + core3 { + cpu = <&cpu39>; + }; + }; + + cluster10 { + core0 { + cpu = <&cpu40>; + }; + core1 { + cpu = <&cpu41>; + }; + core2 { + cpu = <&cpu42>; + }; + core3 { + cpu = <&cpu43>; + }; + }; + + cluster11 { + core0 { + cpu = <&cpu44>; + }; + core1 { + cpu = <&cpu45>; + }; + core2 { + cpu = <&cpu46>; + }; + core3 { + cpu = <&cpu47>; + }; + }; + + cluster12 { + core0 { + cpu = <&cpu48>; + }; + core1 { + cpu = <&cpu49>; + }; + core2 { + cpu = <&cpu50>; + }; + core3 { + cpu = <&cpu51>; + }; + }; + + cluster13 { + core0 { + cpu = <&cpu52>; + }; + core1 { + cpu = <&cpu53>; + }; + core2 { + cpu = <&cpu54>; + }; + core3 { + cpu = <&cpu55>; + }; + }; + + cluster14 { + core0 { + cpu = <&cpu56>; + }; + core1 { + cpu = <&cpu57>; + }; + core2 { + cpu = <&cpu58>; + }; + core3 { + cpu = <&cpu59>; + }; + }; + + cluster15 { + core0 { + cpu = <&cpu60>; + }; + core1 { + cpu = <&cpu61>; + }; + core2 { + cpu = <&cpu62>; + }; + core3 { + cpu = <&cpu63>; + }; + }; + }; + + cpu0: cpu@10000 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10000>; + enable-method = "psci"; + next-level-cache = <&cluster0_l2>; + numa-node-id = <0>; + }; + + cpu1: cpu@10001 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10001>; + enable-method = "psci"; + next-level-cache = <&cluster0_l2>; + numa-node-id = <0>; + }; + + cpu2: cpu@10002 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10002>; + enable-method = "psci"; + next-level-cache = <&cluster0_l2>; + numa-node-id = <0>; + }; + + cpu3: cpu@10003 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10003>; + enable-method = "psci"; + next-level-cache = <&cluster0_l2>; + numa-node-id = <0>; + }; + + cpu4: cpu@10100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10100>; + enable-method = "psci"; + next-level-cache = <&cluster1_l2>; + numa-node-id = <0>; + }; + + cpu5: cpu@10101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10101>; + enable-method = "psci"; + next-level-cache = <&cluster1_l2>; + numa-node-id = <0>; + }; + + cpu6: cpu@10102 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10102>; + enable-method = "psci"; + next-level-cache = <&cluster1_l2>; + numa-node-id = <0>; + }; + + cpu7: cpu@10103 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10103>; + enable-method = "psci"; + next-level-cache = <&cluster1_l2>; + numa-node-id = <0>; + }; + + cpu8: cpu@10200 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10200>; + enable-method = "psci"; + next-level-cache = <&cluster2_l2>; + numa-node-id = <0>; + }; + + cpu9: cpu@10201 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10201>; + enable-method = "psci"; + next-level-cache = <&cluster2_l2>; + numa-node-id = <0>; + }; + + cpu10: cpu@10202 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10202>; + enable-method = "psci"; + next-level-cache = <&cluster2_l2>; + numa-node-id = <0>; + }; + + cpu11: cpu@10203 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10203>; + enable-method = "psci"; + next-level-cache = <&cluster2_l2>; + numa-node-id = <0>; + }; + + cpu12: cpu@10300 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10300>; + enable-method = "psci"; + next-level-cache = <&cluster3_l2>; + numa-node-id = <0>; + }; + + cpu13: cpu@10301 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10301>; + enable-method = "psci"; + next-level-cache = <&cluster3_l2>; + numa-node-id = <0>; + }; + + cpu14: cpu@10302 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10302>; + enable-method = "psci"; + next-level-cache = <&cluster3_l2>; + numa-node-id = <0>; + }; + + cpu15: cpu@10303 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x10303>; + enable-method = "psci"; + next-level-cache = <&cluster3_l2>; + numa-node-id = <0>; + }; + + cpu16: cpu@30000 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30000>; + enable-method = "psci"; + next-level-cache = <&cluster4_l2>; + numa-node-id = <1>; + }; + + cpu17: cpu@30001 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30001>; + enable-method = "psci"; + next-level-cache = <&cluster4_l2>; + numa-node-id = <1>; + }; + + cpu18: cpu@30002 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30002>; + enable-method = "psci"; + next-level-cache = <&cluster4_l2>; + numa-node-id = <1>; + }; + + cpu19: cpu@30003 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30003>; + enable-method = "psci"; + next-level-cache = <&cluster4_l2>; + numa-node-id = <1>; + }; + + cpu20: cpu@30100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30100>; + enable-method = "psci"; + next-level-cache = <&cluster5_l2>; + numa-node-id = <1>; + }; + + cpu21: cpu@30101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30101>; + enable-method = "psci"; + next-level-cache = <&cluster5_l2>; + numa-node-id = <1>; + }; + + cpu22: cpu@30102 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30102>; + enable-method = "psci"; + next-level-cache = <&cluster5_l2>; + numa-node-id = <1>; + }; + + cpu23: cpu@30103 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30103>; + enable-method = "psci"; + next-level-cache = <&cluster5_l2>; + numa-node-id = <1>; + }; + + cpu24: cpu@30200 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30200>; + enable-method = "psci"; + next-level-cache = <&cluster6_l2>; + numa-node-id = <1>; + }; + + cpu25: cpu@30201 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30201>; + enable-method = "psci"; + next-level-cache = <&cluster6_l2>; + numa-node-id = <1>; + }; + + cpu26: cpu@30202 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30202>; + enable-method = "psci"; + next-level-cache = <&cluster6_l2>; + numa-node-id = <1>; + }; + + cpu27: cpu@30203 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30203>; + enable-method = "psci"; + next-level-cache = <&cluster6_l2>; + numa-node-id = <1>; + }; + + cpu28: cpu@30300 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30300>; + enable-method = "psci"; + next-level-cache = <&cluster7_l2>; + numa-node-id = <1>; + }; + + cpu29: cpu@30301 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30301>; + enable-method = "psci"; + next-level-cache = <&cluster7_l2>; + numa-node-id = <1>; + }; + + cpu30: cpu@30302 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30302>; + enable-method = "psci"; + next-level-cache = <&cluster7_l2>; + numa-node-id = <1>; + }; + + cpu31: cpu@30303 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x30303>; + enable-method = "psci"; + next-level-cache = <&cluster7_l2>; + numa-node-id = <1>; + }; + + cpu32: cpu@50000 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50000>; + enable-method = "psci"; + next-level-cache = <&cluster8_l2>; + numa-node-id = <2>; + }; + + cpu33: cpu@50001 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50001>; + enable-method = "psci"; + next-level-cache = <&cluster8_l2>; + numa-node-id = <2>; + }; + + cpu34: cpu@50002 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50002>; + enable-method = "psci"; + next-level-cache = <&cluster8_l2>; + numa-node-id = <2>; + }; + + cpu35: cpu@50003 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50003>; + enable-method = "psci"; + next-level-cache = <&cluster8_l2>; + numa-node-id = <2>; + }; + + cpu36: cpu@50100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50100>; + enable-method = "psci"; + next-level-cache = <&cluster9_l2>; + numa-node-id = <2>; + }; + + cpu37: cpu@50101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50101>; + enable-method = "psci"; + next-level-cache = <&cluster9_l2>; + numa-node-id = <2>; + }; + + cpu38: cpu@50102 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50102>; + enable-method = "psci"; + next-level-cache = <&cluster9_l2>; + numa-node-id = <2>; + }; + + cpu39: cpu@50103 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50103>; + enable-method = "psci"; + next-level-cache = <&cluster9_l2>; + numa-node-id = <2>; + }; + + cpu40: cpu@50200 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50200>; + enable-method = "psci"; + next-level-cache = <&cluster10_l2>; + numa-node-id = <2>; + }; + + cpu41: cpu@50201 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50201>; + enable-method = "psci"; + next-level-cache = <&cluster10_l2>; + numa-node-id = <2>; + }; + + cpu42: cpu@50202 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50202>; + enable-method = "psci"; + next-level-cache = <&cluster10_l2>; + numa-node-id = <2>; + }; + + cpu43: cpu@50203 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50203>; + enable-method = "psci"; + next-level-cache = <&cluster10_l2>; + numa-node-id = <2>; + }; + + cpu44: cpu@50300 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50300>; + enable-method = "psci"; + next-level-cache = <&cluster11_l2>; + numa-node-id = <2>; + }; + + cpu45: cpu@50301 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50301>; + enable-method = "psci"; + next-level-cache = <&cluster11_l2>; + numa-node-id = <2>; + }; + + cpu46: cpu@50302 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50302>; + enable-method = "psci"; + next-level-cache = <&cluster11_l2>; + numa-node-id = <2>; + }; + + cpu47: cpu@50303 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x50303>; + enable-method = "psci"; + next-level-cache = <&cluster11_l2>; + numa-node-id = <2>; + }; + + cpu48: cpu@70000 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70000>; + enable-method = "psci"; + next-level-cache = <&cluster12_l2>; + numa-node-id = <3>; + }; + + cpu49: cpu@70001 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70001>; + enable-method = "psci"; + next-level-cache = <&cluster12_l2>; + numa-node-id = <3>; + }; + + cpu50: cpu@70002 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70002>; + enable-method = "psci"; + next-level-cache = <&cluster12_l2>; + numa-node-id = <3>; + }; + + cpu51: cpu@70003 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70003>; + enable-method = "psci"; + next-level-cache = <&cluster12_l2>; + numa-node-id = <3>; + }; + + cpu52: cpu@70100 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70100>; + enable-method = "psci"; + next-level-cache = <&cluster13_l2>; + numa-node-id = <3>; + }; + + cpu53: cpu@70101 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70101>; + enable-method = "psci"; + next-level-cache = <&cluster13_l2>; + numa-node-id = <3>; + }; + + cpu54: cpu@70102 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70102>; + enable-method = "psci"; + next-level-cache = <&cluster13_l2>; + numa-node-id = <3>; + }; + + cpu55: cpu@70103 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70103>; + enable-method = "psci"; + next-level-cache = <&cluster13_l2>; + numa-node-id = <3>; + }; + + cpu56: cpu@70200 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70200>; + enable-method = "psci"; + next-level-cache = <&cluster14_l2>; + numa-node-id = <3>; + }; + + cpu57: cpu@70201 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70201>; + enable-method = "psci"; + next-level-cache = <&cluster14_l2>; + numa-node-id = <3>; + }; + + cpu58: cpu@70202 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70202>; + enable-method = "psci"; + next-level-cache = <&cluster14_l2>; + numa-node-id = <3>; + }; + + cpu59: cpu@70203 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70203>; + enable-method = "psci"; + next-level-cache = <&cluster14_l2>; + numa-node-id = <3>; + }; + + cpu60: cpu@70300 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70300>; + enable-method = "psci"; + next-level-cache = <&cluster15_l2>; + numa-node-id = <3>; + }; + + cpu61: cpu@70301 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70301>; + enable-method = "psci"; + next-level-cache = <&cluster15_l2>; + numa-node-id = <3>; + }; + + cpu62: cpu@70302 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70302>; + enable-method = "psci"; + next-level-cache = <&cluster15_l2>; + numa-node-id = <3>; + }; + + cpu63: cpu@70303 { + device_type = "cpu"; + compatible = "arm,cortex-a72", "arm,armv8"; + reg = <0x70303>; + enable-method = "psci"; + next-level-cache = <&cluster15_l2>; + numa-node-id = <3>; + }; + + cluster0_l2: l2-cache0 { + compatible = "cache"; + }; + + cluster1_l2: l2-cache1 { + compatible = "cache"; + }; + + cluster2_l2: l2-cache2 { + compatible = "cache"; + }; + + cluster3_l2: l2-cache3 { + compatible = "cache"; + }; + + cluster4_l2: l2-cache4 { + compatible = "cache"; + }; + + cluster5_l2: l2-cache5 { + compatible = "cache"; + }; + + cluster6_l2: l2-cache6 { + compatible = "cache"; + }; + + cluster7_l2: l2-cache7 { + compatible = "cache"; + }; + + cluster8_l2: l2-cache8 { + compatible = "cache"; + }; + + cluster9_l2: l2-cache9 { + compatible = "cache"; + }; + + cluster10_l2: l2-cache10 { + compatible = "cache"; + }; + + cluster11_l2: l2-cache11 { + compatible = "cache"; + }; + + cluster12_l2: l2-cache12 { + compatible = "cache"; + }; + + cluster13_l2: l2-cache13 { + compatible = "cache"; + }; + + cluster14_l2: l2-cache14 { + compatible = "cache"; + }; + + cluster15_l2: l2-cache15 { + compatible = "cache"; + }; + }; + + gic: interrupt-controller@4d000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + #redistributor-regions = <4>; + redistributor-stride = <0x0 0x40000>; + reg = <0x0 0x4d000000 0x0 0x10000>, /* GICD */ + <0x0 0x4d100000 0x0 0x400000>, /* p0 GICR node 0 */ + <0x0 0x6d100000 0x0 0x400000>, /* p0 GICR node 1 */ + <0x400 0x4d100000 0x0 0x400000>, /* p1 GICR node 2 */ + <0x400 0x6d100000 0x0 0x400000>, /* p1 GICR node 3 */ + <0x0 0xfe000000 0x0 0x10000>, /* GICC */ + <0x0 0xfe010000 0x0 0x10000>, /* GICH */ + <0x0 0xfe020000 0x0 0x10000>; /* GICV */ + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + + p0_its_peri_a: interrupt-controller@4c000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0x4c000000 0x0 0x40000>; + }; + + p0_its_peri_b: interrupt-controller@6c000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0x6c000000 0x0 0x40000>; + }; + + p0_its_dsa_a: interrupt-controller@c6000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x0 0xc6000000 0x0 0x40000>; + }; + + p0_its_dsa_b: interrupt-controller@8,c6000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x8 0xc6000000 0x0 0x40000>; + }; + + p1_its_peri_a: interrupt-controller@400,4c000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x400 0x4c000000 0x0 0x40000>; + }; + + p1_its_peri_b: interrupt-controller@400,6c000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x400 0x6c000000 0x0 0x40000>; + }; + + p1_its_dsa_a: interrupt-controller@400,c6000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x400 0xc6000000 0x0 0x40000>; + }; + + p1_its_dsa_b: interrupt-controller@408,c6000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + #msi-cells = <1>; + reg = <0x408 0xc6000000 0x0 0x40000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu { + compatible = "arm,cortex-a72-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + p0_mbigen_peri_b: interrupt-controller@60080000 { + compatible = "hisilicon,mbigen-v2"; + reg = <0x0 0x60080000 0x0 0x10000>; + + mbigen_uart: uart_intc { + msi-parent = <&p0_its_peri_b 0x120c7>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <1>; + }; + }; + + p0_mbigen_pcie_a: interrupt-controller@a0080000 { + compatible = "hisilicon,mbigen-v2"; + reg = <0x0 0xa0080000 0x0 0x10000>; + + mbigen_usb: intc_usb { + msi-parent = <&p0_its_dsa_a 0x40080>; + interrupt-controller; + #interrupt-cells = <2>; + num-pins = <2>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + uart0: uart@602b0000 { + compatible = "arm,sbsa-uart"; + reg = <0x0 0x602b0000 0x0 0x1000>; + interrupt-parent = <&mbigen_uart>; + interrupts = <807 4>; + current-speed = <115200>; + reg-io-width = <4>; + status = "disabled"; + }; + + usb_ohci: ohci@a7030000 { + compatible = "generic-ohci"; + reg = <0x0 0xa7030000 0x0 0x10000>; + interrupt-parent = <&mbigen_usb>; + interrupts = <640 4>; + dma-coherent; + status = "disabled"; + }; + + usb_ehci: ehci@a7020000 { + compatible = "generic-ehci"; + reg = <0x0 0xa7020000 0x0 0x10000>; + interrupt-parent = <&mbigen_usb>; + interrupts = <641 4>; + dma-coherent; + status = "disabled"; + }; + }; +}; diff --git a/dts/src/arm64/marvell/armada-3720-db.dts b/dts/src/arm64/marvell/armada-3720-db.dts index 1372e9a6aa..89de0a7510 100644 --- a/dts/src/arm64/marvell/armada-3720-db.dts +++ b/dts/src/arm64/marvell/armada-3720-db.dts @@ -56,7 +56,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000 0x20000000>; }; @@ -81,3 +81,26 @@ &pcie0 { status = "okay"; }; + +&mdio { + status = "okay"; + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +ð0 { + phy-mode = "rgmii-id"; + phy = <&phy0>; + status = "okay"; +}; + +ð1 { + phy-mode = "sgmii"; + phy = <&phy1>; + status = "okay"; +}; diff --git a/dts/src/arm64/marvell/armada-3720-espressobin.dts b/dts/src/arm64/marvell/armada-3720-espressobin.dts new file mode 100644 index 0000000000..83178d909f --- /dev/null +++ b/dts/src/arm64/marvell/armada-3720-espressobin.dts @@ -0,0 +1,82 @@ +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board + * Copyright (C) 2016 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "armada-372x.dtsi" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board"; + compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; +}; + +/* J9 */ +&pcie0 { + status = "okay"; +}; + +/* J6 */ +&sata { + status = "okay"; +}; + +/* Exported on the micro USB connector J5 through an FTDI */ +&uart0 { + status = "okay"; +}; + +/* J7 */ +&usb3 { + status = "okay"; +}; diff --git a/dts/src/arm64/marvell/armada-37xx.dtsi b/dts/src/arm64/marvell/armada-37xx.dtsi index e9bd587934..bab5c6ff57 100644 --- a/dts/src/arm64/marvell/armada-37xx.dtsi +++ b/dts/src/arm64/marvell/armada-37xx.dtsi @@ -91,7 +91,7 @@ #size-cells = <2>; ranges; - internal-regs { + internal-regs@d0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -140,6 +140,29 @@ }; }; + eth0: ethernet@30000 { + compatible = "marvell,armada-3700-neta"; + reg = <0x30000 0x4000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sb_periph_clk 8>; + status = "disabled"; + }; + + mdio: mdio@32004 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x32004 0x4>; + }; + + eth1: ethernet@40000 { + compatible = "marvell,armada-3700-neta"; + reg = <0x40000 0x4000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sb_periph_clk 7>; + status = "disabled"; + }; + usb3: usb@58000 { compatible = "marvell,armada3700-xhci", "generic-xhci"; diff --git a/dts/src/arm64/marvell/armada-ap806.dtsi b/dts/src/arm64/marvell/armada-ap806.dtsi index 7b6136182a..a749ba2ede 100644 --- a/dts/src/arm64/marvell/armada-ap806.dtsi +++ b/dts/src/arm64/marvell/armada-ap806.dtsi @@ -71,7 +71,7 @@ interrupt-parent = <&gic>; ranges; - config-space { + config-space@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; diff --git a/dts/src/arm64/marvell/armada-cp110-master.dtsi b/dts/src/arm64/marvell/armada-cp110-master.dtsi index 602e2c2e9a..05222f749a 100644 --- a/dts/src/arm64/marvell/armada-cp110-master.dtsi +++ b/dts/src/arm64/marvell/armada-cp110-master.dtsi @@ -52,7 +52,7 @@ interrupt-parent = <&gic>; ranges; - config-space { + config-space@f2000000 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -164,6 +164,14 @@ clocks = <&cpm_syscon0 1 21>; status = "disabled"; }; + + cpm_trng: trng@760000 { + compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76"; + reg = <0x760000 0x7d>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpm_syscon0 1 25>; + status = "okay"; + }; }; cpm_pcie0: pcie@f2600000 { diff --git a/dts/src/arm64/marvell/armada-cp110-slave.dtsi b/dts/src/arm64/marvell/armada-cp110-slave.dtsi index 6bf9e24117..638820ce97 100644 --- a/dts/src/arm64/marvell/armada-cp110-slave.dtsi +++ b/dts/src/arm64/marvell/armada-cp110-slave.dtsi @@ -52,7 +52,7 @@ interrupt-parent = <&gic>; ranges; - config-space { + config-space@f4000000 { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; @@ -164,6 +164,14 @@ clocks = <&cps_syscon0 1 21>; status = "disabled"; }; + + cps_trng: trng@760000 { + compatible = "marvell,armada-8k-rng", "inside-secure,safexcel-eip76"; + reg = <0x760000 0x7d>; + interrupts = <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cps_syscon0 1 25>; + status = "okay"; + }; }; cps_pcie0: pcie@f4600000 { diff --git a/dts/src/arm64/marvell/berlin4ct-dmp.dts b/dts/src/arm64/marvell/berlin4ct-dmp.dts index 0d70d39fa8..fae6c69247 100644 --- a/dts/src/arm64/marvell/berlin4ct-dmp.dts +++ b/dts/src/arm64/marvell/berlin4ct-dmp.dts @@ -54,7 +54,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@1000000 { device_type = "memory"; /* the first 16MB is for firmwares' usage */ reg = <0 0x01000000 0 0x7f000000>; diff --git a/dts/src/arm64/marvell/berlin4ct-stb.dts b/dts/src/arm64/marvell/berlin4ct-stb.dts index 348c37ecf0..d47edad13e 100644 --- a/dts/src/arm64/marvell/berlin4ct-stb.dts +++ b/dts/src/arm64/marvell/berlin4ct-stb.dts @@ -54,7 +54,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@1000000 { device_type = "memory"; /* the first 16MB is for firmwares' usage */ reg = <0 0x01000000 0 0x7f000000>; diff --git a/dts/src/arm64/marvell/berlin4ct.dtsi b/dts/src/arm64/marvell/berlin4ct.dtsi index 85c23facb9..d6b800fd26 100644 --- a/dts/src/arm64/marvell/berlin4ct.dtsi +++ b/dts/src/arm64/marvell/berlin4ct.dtsi @@ -142,7 +142,7 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; - soc { + soc@f7000000 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/dts/src/arm64/mediatek/mt8173-evb.dts b/dts/src/arm64/mediatek/mt8173-evb.dts index 2a7f731c77..0ecaad4333 100644 --- a/dts/src/arm64/mediatek/mt8173-evb.dts +++ b/dts/src/arm64/mediatek/mt8173-evb.dts @@ -34,15 +34,6 @@ chosen { }; - usb_p1_vbus: regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "usb_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&pio 130 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - connector { compatible = "hdmi-connector"; label = "hdmi"; @@ -54,6 +45,29 @@ }; }; }; + + extcon_usb: extcon_iddig { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>; + }; + + usb_p1_vbus: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 130 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + usb_p0_vbus: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; }; &cec { @@ -243,6 +257,20 @@ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; }; + + usb_id_pins_float: usb_iddig_pull_up { + pins_iddig { + pinmux = <MT8173_PIN_16_IDDIG__FUNC_IDDIG>; + bias-pull-up; + }; + }; + + usb_id_pins_ground: usb_iddig_pull_down { + pins_iddig { + pinmux = <MT8173_PIN_16_IDDIG__FUNC_IDDIG>; + bias-pull-down; + }; + }; }; &pwm0 { @@ -469,12 +497,25 @@ status = "okay"; }; +&ssusb { + vusb33-supply = <&mt6397_vusb_reg>; + vbus-supply = <&usb_p0_vbus>; + extcon = <&extcon_usb>; + dr_mode = "otg"; + mediatek,enable-wakeup; + pinctrl-names = "default", "id_float", "id_ground"; + pinctrl-0 = <&usb_id_pins_float>; + pinctrl-1 = <&usb_id_pins_float>; + pinctrl-2 = <&usb_id_pins_ground>; + status = "okay"; +}; + &uart0 { status = "okay"; }; -&usb30 { +&usb_host { vusb33-supply = <&mt6397_vusb_reg>; vbus-supply = <&usb_p1_vbus>; - mediatek,wakeup-src = <1>; + status = "okay"; }; diff --git a/dts/src/arm64/mediatek/mt8173.dtsi b/dts/src/arm64/mediatek/mt8173.dtsi index 1c71e25660..12e702771f 100644 --- a/dts/src/arm64/mediatek/mt8173.dtsi +++ b/dts/src/arm64/mediatek/mt8173.dtsi @@ -41,6 +41,14 @@ dpi0 = &dpi0; dsi0 = &dsi0; dsi1 = &dsi1; + mdp_rdma0 = &mdp_rdma0; + mdp_rdma1 = &mdp_rdma1; + mdp_rsz0 = &mdp_rsz0; + mdp_rsz1 = &mdp_rsz1; + mdp_rsz2 = &mdp_rsz2; + mdp_wdma0 = &mdp_wdma0; + mdp_wrot0 = &mdp_wrot0; + mdp_wrot1 = &mdp_wrot1; }; cpus { @@ -450,6 +458,9 @@ auxadc: auxadc@11001000 { compatible = "mediatek,mt8173-auxadc"; reg = <0 0x11001000 0 0x1000>; + clocks = <&pericfg CLK_PERI_AUXADC>; + clock-names = "main"; + #io-channel-cells = <1>; }; uart0: serial@11002000 { @@ -707,11 +718,14 @@ status = "disabled"; }; - usb30: usb@11270000 { - compatible = "mediatek,mt8173-xhci"; - reg = <0 0x11270000 0 0x1000>, + ssusb: usb@11271000 { + compatible = "mediatek,mt8173-mtu3"; + reg = <0 0x11271000 0 0x3000>, <0 0x11280700 0 0x0100>; - interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; + reg-names = "mac", "ippc"; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_LOW>; + phys = <&phy_port0 PHY_TYPE_USB3>, + <&phy_port1 PHY_TYPE_USB2>; power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; clocks = <&topckgen CLK_TOP_USB30_SEL>, <&pericfg CLK_PERI_USB0>, @@ -719,10 +733,22 @@ clock-names = "sys_ck", "wakeup_deb_p0", "wakeup_deb_p1"; - phys = <&phy_port0 PHY_TYPE_USB3>, - <&phy_port1 PHY_TYPE_USB2>; mediatek,syscon-wakeup = <&pericfg>; - status = "okay"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + usb_host: xhci@11270000 { + compatible = "mediatek,mt8173-xhci"; + reg = <0 0x11270000 0 0x1000>; + reg-names = "mac"; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>; + clock-names = "sys_ck"; + status = "disabled"; + }; }; u3phy: usb-phy@11290000 { @@ -755,6 +781,82 @@ #clock-cells = <1>; }; + mdp { + compatible = "mediatek,mt8173-mdp"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + mediatek,vpu = <&vpu>; + + mdp_rdma0: rdma@14001000 { + compatible = "mediatek,mt8173-mdp-rdma"; + reg = <0 0x14001000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RDMA0>, + <&mmsys CLK_MM_MUTEX_32K>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_RDMA0>; + mediatek,larb = <&larb0>; + }; + + mdp_rdma1: rdma@14002000 { + compatible = "mediatek,mt8173-mdp-rdma"; + reg = <0 0x14002000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RDMA1>, + <&mmsys CLK_MM_MUTEX_32K>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_RDMA1>; + mediatek,larb = <&larb4>; + }; + + mdp_rsz0: rsz@14003000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14003000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ0>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + }; + + mdp_rsz1: rsz@14004000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14004000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ1>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + }; + + mdp_rsz2: rsz@14005000 { + compatible = "mediatek,mt8173-mdp-rsz"; + reg = <0 0x14005000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_RSZ2>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + }; + + mdp_wdma0: wdma@14006000 { + compatible = "mediatek,mt8173-mdp-wdma"; + reg = <0 0x14006000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WDMA>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WDMA>; + mediatek,larb = <&larb0>; + }; + + mdp_wrot0: wrot@14007000 { + compatible = "mediatek,mt8173-mdp-wrot"; + reg = <0 0x14007000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WROT0>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WROT0>; + mediatek,larb = <&larb0>; + }; + + mdp_wrot1: wrot@14008000 { + compatible = "mediatek,mt8173-mdp-wrot"; + reg = <0 0x14008000 0 0x1000>; + clocks = <&mmsys CLK_MM_MDP_WROT1>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>; + iommus = <&iommu M4U_PORT_MDP_WROT1>; + mediatek,larb = <&larb4>; + }; + }; + ovl0: ovl@1400c000 { compatible = "mediatek,mt8173-disp-ovl"; reg = <0 0x1400c000 0 0x1000>; @@ -1051,6 +1153,50 @@ #clock-cells = <1>; }; + vcodec_dec: vcodec@16000000 { + compatible = "mediatek,mt8173-vcodec-dec"; + reg = <0 0x16000000 0 0x100>, /* VDEC_SYS */ + <0 0x16020000 0 0x1000>, /* VDEC_MISC */ + <0 0x16021000 0 0x800>, /* VDEC_LD */ + <0 0x16021800 0 0x800>, /* VDEC_TOP */ + <0 0x16022000 0 0x1000>, /* VDEC_CM */ + <0 0x16023000 0 0x1000>, /* VDEC_AD */ + <0 0x16024000 0 0x1000>, /* VDEC_AV */ + <0 0x16025000 0 0x1000>, /* VDEC_PP */ + <0 0x16026800 0 0x800>, /* VDEC_HWD */ + <0 0x16027000 0 0x800>, /* VDEC_HWQ */ + <0 0x16027800 0 0x800>, /* VDEC_HWB */ + <0 0x16028400 0 0x400>; /* VDEC_HWG */ + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_LOW>; + mediatek,larb = <&larb1>; + iommus = <&iommu M4U_PORT_HW_VDEC_MC_EXT>, + <&iommu M4U_PORT_HW_VDEC_PP_EXT>, + <&iommu M4U_PORT_HW_VDEC_AVC_MV_EXT>, + <&iommu M4U_PORT_HW_VDEC_PRED_RD_EXT>, + <&iommu M4U_PORT_HW_VDEC_PRED_WR_EXT>, + <&iommu M4U_PORT_HW_VDEC_UFO_EXT>, + <&iommu M4U_PORT_HW_VDEC_VLD_EXT>, + <&iommu M4U_PORT_HW_VDEC_VLD2_EXT>; + mediatek,vpu = <&vpu>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_VDEC>; + clocks = <&apmixedsys CLK_APMIXED_VCODECPLL>, + <&topckgen CLK_TOP_UNIVPLL_D2>, + <&topckgen CLK_TOP_CCI400_SEL>, + <&topckgen CLK_TOP_VDEC_SEL>, + <&topckgen CLK_TOP_VCODECPLL>, + <&apmixedsys CLK_APMIXED_VENCPLL>, + <&topckgen CLK_TOP_VENC_LT_SEL>, + <&topckgen CLK_TOP_VCODECPLL_370P5>; + clock-names = "vcodecpll", + "univpll_d2", + "clk_cci400_sel", + "vdec_sel", + "vdecpll", + "vencpll", + "venc_lt_sel", + "vdec_bus_clk_src"; + }; + larb1: larb@16010000 { compatible = "mediatek,mt8173-smi-larb"; reg = <0 0x16010000 0 0x1000>; diff --git a/dts/src/arm64/nvidia/tegra186-p2771-0000.dts b/dts/src/arm64/nvidia/tegra186-p2771-0000.dts new file mode 100644 index 0000000000..0d3c0996d8 --- /dev/null +++ b/dts/src/arm64/nvidia/tegra186-p2771-0000.dts @@ -0,0 +1,8 @@ +/dts-v1/; + +#include "tegra186-p3310.dtsi" + +/ { + model = "NVIDIA Tegra186 P2771-0000 Development Board"; + compatible = "nvidia,p2771-0000", "nvidia,tegra186"; +}; diff --git a/dts/src/arm64/nvidia/tegra186-p3310.dtsi b/dts/src/arm64/nvidia/tegra186-p3310.dtsi new file mode 100644 index 0000000000..1abe2eceb3 --- /dev/null +++ b/dts/src/arm64/nvidia/tegra186-p3310.dtsi @@ -0,0 +1,64 @@ +#include "tegra186.dtsi" + +/ { + model = "NVIDIA Tegra186 P3310 Processor Module"; + compatible = "nvidia,p3310", "nvidia,tegra186"; + + aliases { + serial0 = &uarta; + }; + + chosen { + bootargs = "earlycon console=ttyS0,115200n8"; + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x80000000 0x2 0x00000000>; + }; + + serial@3100000 { + status = "okay"; + }; + + hsp@3c00000 { + status = "okay"; + }; + + cpus { + cpu@0 { + enable-method = "psci"; + }; + + cpu@1 { + enable-method = "psci"; + }; + + cpu@2 { + enable-method = "psci"; + }; + + cpu@3 { + enable-method = "psci"; + }; + + cpu@4 { + enable-method = "psci"; + }; + + cpu@5 { + enable-method = "psci"; + }; + }; + + bpmp { + status = "okay"; + }; + + psci { + compatible = "arm,psci-1.0"; + status = "okay"; + method = "smc"; + }; +}; diff --git a/dts/src/arm64/nvidia/tegra186.dtsi b/dts/src/arm64/nvidia/tegra186.dtsi new file mode 100644 index 0000000000..a918e10240 --- /dev/null +++ b/dts/src/arm64/nvidia/tegra186.dtsi @@ -0,0 +1,398 @@ +#include <dt-bindings/gpio/tegra186-gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "nvidia,tegra186"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + gpio: gpio@2200000 { + compatible = "nvidia,tegra186-gpio"; + reg-names = "security", "gpio"; + reg = <0x0 0x2200000 0x0 0x10000>, + <0x0 0x2210000 0x0 0x10000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + #gpio-cells = <2>; + gpio-controller; + }; + + uarta: serial@3100000 { + compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x03100000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 55>; + clock-names = "serial"; + resets = <&bpmp 47>; + reset-names = "serial"; + status = "disabled"; + }; + + uartb: serial@3110000 { + compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x03110000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 56>; + clock-names = "serial"; + resets = <&bpmp 48>; + reset-names = "serial"; + status = "disabled"; + }; + + uartd: serial@3130000 { + compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x03130000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 77>; + clock-names = "serial"; + resets = <&bpmp 50>; + reset-names = "serial"; + status = "disabled"; + }; + + uarte: serial@3140000 { + compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x03140000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 194>; + clock-names = "serial"; + resets = <&bpmp 132>; + reset-names = "serial"; + status = "disabled"; + }; + + uartf: serial@3150000 { + compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x03150000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 195>; + clock-names = "serial"; + resets = <&bpmp 111>; + reset-names = "serial"; + status = "disabled"; + }; + + gen1_i2c: i2c@3160000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x03160000 0x0 0x10000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 47>; + clock-names = "div-clk"; + resets = <&bpmp 19>; + reset-names = "i2c"; + status = "disabled"; + }; + + cam_i2c: i2c@3180000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x03180000 0x0 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 75>; + clock-names = "div-clk"; + resets = <&bpmp 21>; + reset-names = "i2c"; + status = "disabled"; + }; + + /* shares pads with dpaux1 */ + dp_aux_ch1_i2c: i2c@3190000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x03190000 0x0 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 86>; + clock-names = "div-clk"; + resets = <&bpmp 22>; + reset-names = "i2c"; + status = "disabled"; + }; + + /* controlled by BPMP, should not be enabled */ + pwr_i2c: i2c@31a0000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x031a0000 0x0 0x10000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 48>; + clock-names = "div-clk"; + resets = <&bpmp 23>; + reset-names = "i2c"; + status = "disabled"; + }; + + /* shares pads with dpaux0 */ + dp_aux_ch0_i2c: i2c@31b0000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x031b0000 0x0 0x10000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 125>; + clock-names = "div-clk"; + resets = <&bpmp 24>; + reset-names = "i2c"; + status = "disabled"; + }; + + gen7_i2c: i2c@31c0000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x031c0000 0x0 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 182>; + clock-names = "div-clk"; + resets = <&bpmp 81>; + reset-names = "i2c"; + status = "disabled"; + }; + + gen9_i2c: i2c@31e0000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x031e0000 0x0 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 183>; + clock-names = "div-clk"; + resets = <&bpmp 83>; + reset-names = "i2c"; + status = "disabled"; + }; + + sdmmc1: sdhci@3400000 { + compatible = "nvidia,tegra186-sdhci"; + reg = <0x0 0x03400000 0x0 0x10000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 52>; + clock-names = "sdhci"; + resets = <&bpmp 33>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdmmc2: sdhci@3420000 { + compatible = "nvidia,tegra186-sdhci"; + reg = <0x0 0x03420000 0x0 0x10000>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 53>; + clock-names = "sdhci"; + resets = <&bpmp 34>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdmmc3: sdhci@3440000 { + compatible = "nvidia,tegra186-sdhci"; + reg = <0x0 0x03440000 0x0 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 76>; + clock-names = "sdhci"; + resets = <&bpmp 35>; + reset-names = "sdhci"; + status = "disabled"; + }; + + sdmmc4: sdhci@3460000 { + compatible = "nvidia,tegra186-sdhci"; + reg = <0x0 0x03460000 0x0 0x10000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 54>; + clock-names = "sdhci"; + resets = <&bpmp 36>; + reset-names = "sdhci"; + status = "disabled"; + }; + + gic: interrupt-controller@3881000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x03881000 0x0 0x1000>, + <0x0 0x03882000 0x0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-parent = <&gic>; + }; + + hsp_top0: hsp@3c00000 { + compatible = "nvidia,tegra186-hsp"; + reg = <0x0 0x03c00000 0x0 0xa0000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "doorbell"; + #mbox-cells = <2>; + status = "disabled"; + }; + + gen2_i2c: i2c@c240000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x0c240000 0x0 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 218>; + clock-names = "div-clk"; + resets = <&bpmp 20>; + reset-names = "i2c"; + status = "disabled"; + }; + + gen8_i2c: i2c@c250000 { + compatible = "nvidia,tegra186-i2c", "nvidia,tegra114-i2c"; + reg = <0x0 0x0c250000 0x0 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&bpmp 219>; + clock-names = "div-clk"; + resets = <&bpmp 82>; + reset-names = "i2c"; + status = "disabled"; + }; + + uartc: serial@c280000 { + compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x0c280000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 215>; + clock-names = "serial"; + resets = <&bpmp 49>; + reset-names = "serial"; + status = "disabled"; + }; + + uartg: serial@c290000 { + compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; + reg = <0x0 0x0c290000 0x0 0x40>; + reg-shift = <2>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&bpmp 216>; + clock-names = "serial"; + resets = <&bpmp 112>; + reset-names = "serial"; + status = "disabled"; + }; + + gpio_aon: gpio@c2f0000 { + compatible = "nvidia,tegra186-gpio-aon"; + reg-names = "security", "gpio"; + reg = <0x0 0xc2f0000 0x0 0x1000>, + <0x0 0xc2f1000 0x0 0x1000>; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sysram@30000000 { + compatible = "nvidia,tegra186-sysram", "mmio-sram"; + reg = <0x0 0x30000000 0x0 0x50000>; + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0x0 0x0 0x30000000 0x0 0x50000>; + + cpu_bpmp_tx: shmem@4e000 { + compatible = "nvidia,tegra186-bpmp-shmem"; + reg = <0x0 0x4e000 0x0 0x1000>; + label = "cpu-bpmp-tx"; + pool; + }; + + cpu_bpmp_rx: shmem@4f000 { + compatible = "nvidia,tegra186-bpmp-shmem"; + reg = <0x0 0x4f000 0x0 0x1000>; + label = "cpu-bpmp-rx"; + pool; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "nvidia,tegra186-denver", "arm,armv8"; + device_type = "cpu"; + reg = <0x000>; + }; + + cpu@1 { + compatible = "nvidia,tegra186-denver", "arm,armv8"; + device_type = "cpu"; + reg = <0x001>; + }; + + cpu@2 { + compatible = "arm,cortex-a57", "arm,armv8"; + device_type = "cpu"; + reg = <0x100>; + }; + + cpu@3 { + compatible = "arm,cortex-a57", "arm,armv8"; + device_type = "cpu"; + reg = <0x101>; + }; + + cpu@4 { + compatible = "arm,cortex-a57", "arm,armv8"; + device_type = "cpu"; + reg = <0x102>; + }; + + cpu@5 { + compatible = "arm,cortex-a57", "arm,armv8"; + device_type = "cpu"; + reg = <0x103>; + }; + }; + + bpmp: bpmp { + compatible = "nvidia,tegra186-bpmp"; + mboxes = <&hsp_top0 0 19>; + shmem = <&cpu_bpmp_tx &cpu_bpmp_rx>; + #clock-cells = <1>; + #reset-cells = <1>; + + bpmp_i2c: i2c { + compatible = "nvidia,tegra186-bpmp-i2c"; + nvidia,bpmp-bus-id = <5>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&gic>; + }; +}; diff --git a/dts/src/arm64/nvidia/tegra210-p2180.dtsi b/dts/src/arm64/nvidia/tegra210-p2180.dtsi index 5fda583351..906fb836d2 100644 --- a/dts/src/arm64/nvidia/tegra210-p2180.dtsi +++ b/dts/src/arm64/nvidia/tegra210-p2180.dtsi @@ -21,6 +21,10 @@ reg = <0x0 0x80000000 0x1 0x0>; }; + gpu@57000000 { + vdd-supply = <&vdd_gpu>; + }; + /* debug port */ serial@70006000 { status = "okay"; @@ -291,4 +295,18 @@ clock-frequency = <32768>; }; }; + + regulators { + vdd_gpu: regulator@100 { + compatible = "pwm-regulator"; + reg = <100>; + pwms = <&pwm 1 4880>; + regulator-name = "VDD_GPU"; + regulator-min-microvolt = <710000>; + regulator-max-microvolt = <1320000>; + enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; + regulator-ramp-delay = <80>; + regulator-enable-ramp-delay = <1000>; + }; + }; }; diff --git a/dts/src/arm64/nvidia/tegra210-p2371-2180.dts b/dts/src/arm64/nvidia/tegra210-p2371-2180.dts index 983775e637..4c1ea7a08d 100644 --- a/dts/src/arm64/nvidia/tegra210-p2371-2180.dts +++ b/dts/src/arm64/nvidia/tegra210-p2371-2180.dts @@ -7,6 +7,32 @@ model = "NVIDIA Jetson TX1 Developer Kit"; compatible = "nvidia,p2371-2180", "nvidia,tegra210"; + pcie-controller@01003000 { + status = "okay"; + + avdd-pll-uerefe-supply = <&avdd_1v05_pll>; + hvddio-pex-supply = <&vdd_1v8>; + dvddio-pex-supply = <&vdd_pex_1v05>; + dvdd-pex-pll-supply = <&vdd_pex_1v05>; + hvdd-pex-pll-e-supply = <&vdd_1v8>; + vddio-pex-ctl-supply = <&vdd_1v8>; + + pci@1,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>; + phy-names = "pcie-0", "pcie-1", "pcie-2", "pcie-3"; + status = "okay"; + }; + + pci@2,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>; + phy-names = "pcie-0"; + status = "okay"; + }; + }; + host1x@50000000 { dsi@54300000 { status = "okay"; diff --git a/dts/src/arm64/nvidia/tegra210-smaug.dts b/dts/src/arm64/nvidia/tegra210-smaug.dts index c2becb603e..7703227f5d 100644 --- a/dts/src/arm64/nvidia/tegra210-smaug.dts +++ b/dts/src/arm64/nvidia/tegra210-smaug.dts @@ -11,7 +11,8 @@ compatible = "google,smaug-rev8", "google,smaug-rev7", "google,smaug-rev6", "google,smaug-rev5", "google,smaug-rev4", "google,smaug-rev3", - "google,smaug-rev1", "google,smaug", "nvidia,tegra210"; + "google,smaug-rev2", "google,smaug-rev1", + "google,smaug", "nvidia,tegra210"; aliases { serial0 = &uarta; diff --git a/dts/src/arm64/nvidia/tegra210.dtsi b/dts/src/arm64/nvidia/tegra210.dtsi index 46045fe719..2f832df29d 100644 --- a/dts/src/arm64/nvidia/tegra210.dtsi +++ b/dts/src/arm64/nvidia/tegra210.dtsi @@ -11,6 +11,69 @@ #address-cells = <2>; #size-cells = <2>; + pcie-controller@01003000 { + compatible = "nvidia,tegra210-pcie"; + device_type = "pci"; + reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x01003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x02000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x01000000 0x0 0x01000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x01001000 0x0 0x01001000 0 0x00001000 /* port 1 configuration space */ + 0x81000000 0 0x0 0x0 0x12000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x13000000 0x0 0x13000000 0 0x0d000000 /* non-prefetchable memory (208 MiB) */ + 0xc2000000 0 0x20000000 0x0 0x20000000 0 0x20000000>; /* prefetchable memory (512 MiB) */ + + clocks = <&tegra_car TEGRA210_CLK_PCIE>, + <&tegra_car TEGRA210_CLK_AFI>, + <&tegra_car TEGRA210_CLK_PLL_E>, + <&tegra_car TEGRA210_CLK_CML0>; + clock-names = "pex", "afi", "pll_e", "cml"; + resets = <&tegra_car 70>, + <&tegra_car 72>, + <&tegra_car 74>; + reset-names = "pex", "afi", "pcie_x"; + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x01000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <4>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x01001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + }; + host1x@50000000 { compatible = "nvidia,tegra210-host1x", "simple-bus"; reg = <0x0 0x50000000 0x0 0x00034000>; diff --git a/dts/src/arm64/qcom/apq8016-sbc.dtsi b/dts/src/arm64/qcom/apq8016-sbc.dtsi index bb062b5471..08bd5ebafb 100644 --- a/dts/src/arm64/qcom/apq8016-sbc.dtsi +++ b/dts/src/arm64/qcom/apq8016-sbc.dtsi @@ -15,6 +15,7 @@ #include "pm8916.dtsi" #include "apq8016-sbc-soc-pins.dtsi" #include "apq8016-sbc-pmic-pins.dtsi" +#include <dt-bindings/sound/apq8016-lpass.h> / { aliases { @@ -251,6 +252,60 @@ vddio-supply = <&pm8916_l6>; }; }; + + lpass_codec: codec{ + status = "okay"; + }; + + /* + Internal Codec + playback - Primary MI2S + capture - Ter MI2S + + External Primary: + playback - secondary MI2S + capture - Quat MI2S + + External Secondary: + playback - Quat MI2S + capture - Quat MI2S + + */ + + sound: sound { + compatible = "qcom,apq8016-sbc-sndcard"; + reg = <0x07702000 0x4>, <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + + status = "okay"; + pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>; + pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>; + pinctrl-names = "default", "sleep"; + qcom,model = "DB410c"; + qcom,audio-routing = + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + + internal-codec-playback-dai-link@0 { /* I2S - Internal codec */ + link-name = "WCD"; + cpu { /* PRIMARY */ + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + internal-codec-capture-dai-link@0 { /* I2S - Internal codec */ + link-name = "WCD-Capture"; + cpu { /* PRIMARY */ + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; + }; }; usb2513 { @@ -278,6 +333,12 @@ }; }; +&wcd_codec { + status = "okay"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; +}; + &smd_rpm_regulators { vdd_l1_l2_l3-supply = <&pm8916_s3>; vdd_l5-supply = <&pm8916_s3>; @@ -308,8 +369,8 @@ }; l2 { - regulator-min-microvolt = <375000>; - regulator-max-microvolt = <1525000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; }; l3 { @@ -328,8 +389,8 @@ }; l6 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; l7 { @@ -388,8 +449,8 @@ }; l17 { - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3337000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; }; l18 { diff --git a/dts/src/arm64/qcom/apq8096-db820c-pmic-pins.dtsi b/dts/src/arm64/qcom/apq8096-db820c-pmic-pins.dtsi new file mode 100644 index 0000000000..0de95171d6 --- /dev/null +++ b/dts/src/arm64/qcom/apq8096-db820c-pmic-pins.dtsi @@ -0,0 +1,15 @@ + +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +&pm8994_gpios { + + pinctrl-names = "default"; + pinctrl-0 = <&ls_exp_gpio_f>; + + ls_exp_gpio_f: pm8916_mpp4 { + pinconf { + pins = "gpio5"; + output-low; + power-source = <2>; // PM8994_GPIO_S4, 1.8V + }; + }; +}; diff --git a/dts/src/arm64/qcom/apq8096-db820c.dtsi b/dts/src/arm64/qcom/apq8096-db820c.dtsi index afb218cffc..422959b87d 100644 --- a/dts/src/arm64/qcom/apq8096-db820c.dtsi +++ b/dts/src/arm64/qcom/apq8096-db820c.dtsi @@ -12,7 +12,9 @@ */ #include "msm8996.dtsi" +#include "pm8994.dtsi" #include "apq8096-db820c-pins.dtsi" +#include "apq8096-db820c-pmic-pins.dtsi" / { aliases { diff --git a/dts/src/arm64/qcom/msm8916.dtsi b/dts/src/arm64/qcom/msm8916.dtsi index 466ca5705c..f8ff327667 100644 --- a/dts/src/arm64/qcom/msm8916.dtsi +++ b/dts/src/arm64/qcom/msm8916.dtsi @@ -77,7 +77,7 @@ no-map; }; - mpss@86800000 { + mpss_mem: mpss@86800000 { reg = <0x0 0x86800000 0x0 0x2b00000>; no-map; }; @@ -504,6 +504,15 @@ reg-names = "lpass-lpaif"; }; + lpass_codec: codec{ + compatible = "qcom,msm8916-wcd-digital-codec"; + reg = <0x0771c000 0x400>; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "ahbix-clk", "mclk"; + #sound-dai-cells = <1>; + }; + sdhc_1: sdhci@07824000 { compatible = "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; @@ -512,8 +521,10 @@ interrupts = <0 123 0>, <0 138 0>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_APPS_CLK>, - <&gcc GCC_SDCC1_AHB_CLK>; - clock-names = "core", "iface"; + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + mmc-ddr-1_8v; bus-width = <8>; non-removable; status = "disabled"; @@ -527,8 +538,9 @@ interrupts = <0 125 0>, <0 221 0>; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_APPS_CLK>, - <&gcc GCC_SDCC2_AHB_CLK>; - clock-names = "core", "iface"; + <&gcc GCC_SDCC2_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; bus-width = <4>; status = "disabled"; }; @@ -801,6 +813,49 @@ clock-names = "iface_clk"; }; }; + + + hexagon@4080000 { + compatible = "qcom,q6v5-pil"; + reg = <0x04080000 0x100>, + <0x04020000 0x040>; + + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc 0 24 1>, + <&hexagon_smp2p_in 0 0>, + <&hexagon_smp2p_in 1 0>, + <&hexagon_smp2p_in 2 0>, + <&hexagon_smp2p_in 3 0>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>; + clock-names = "iface", "bus", "mem"; + + qcom,smem-states = <&hexagon_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&scm 0>; + reset-names = "mss_restart"; + + mx-supply = <&pm8916_l3>; + pll-supply = <&pm8916_l7>; + + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + }; }; smd { @@ -848,6 +903,14 @@ }; }; }; + + hexagon { + interrupts = <0 25 IRQ_TYPE_EDGE_RISING>; + + qcom,smd-edge = <0>; + qcom,ipc = <&apcs 8 12>; + qcom,remote-pid = <1>; + }; }; hexagon-smp2p { diff --git a/dts/src/arm64/qcom/msm8992-bullhead-rev-101.dts b/dts/src/arm64/qcom/msm8992-bullhead-rev-101.dts new file mode 100644 index 0000000000..4542133916 --- /dev/null +++ b/dts/src/arm64/qcom/msm8992-bullhead-rev-101.dts @@ -0,0 +1,41 @@ +/* Copyright (c) 2015, LGE Inc. All rights reserved. + * Copyright (c) 2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "msm8992.dtsi" + +/ { + model = "LG Nexus 5X"; + compatible = "lg,bullhead", "qcom,msm8992"; + /* required for bootloader to select correct board */ + qcom,board-id = <0xb64 0>; + qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + serial@f991e000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/msm8992-pins.dtsi b/dts/src/arm64/qcom/msm8992-pins.dtsi new file mode 100644 index 0000000000..d2a26f0f8d --- /dev/null +++ b/dts/src/arm64/qcom/msm8992-pins.dtsi @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +&msmgpio { + blsp1_uart2_default: blsp1_uart2_default { + pinmux { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; + }; + + blsp1_uart2_sleep: blsp1_uart2_sleep { + pinmux { + function = "gpio"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; diff --git a/dts/src/arm64/qcom/msm8992.dtsi b/dts/src/arm64/qcom/msm8992.dtsi new file mode 100644 index 0000000000..44b2d37d8c --- /dev/null +++ b/dts/src/arm64/qcom/msm8992.dtsi @@ -0,0 +1,184 @@ +/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8994.h> + +/ { + model = "Qualcomm Technologies, Inc. MSM 8992"; + compatible = "qcom,msm8992"; + // msm-id needed by bootloader for selecting correct blob + qcom,msm-id = <251 0>, <252 0>; + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + intc: interrupt-controller@f9000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xf9000000 0x1000>, + <0xf9002000 0x1000>; + }; + + timer@f9020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xf9020000 0x1000>; + + frame@f9021000 { + frame-number = <0>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9021000 0x1000>, + <0xf9022000 0x1000>; + }; + + frame@f9023000 { + frame-number = <1>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9023000 0x1000>; + status = "disabled"; + }; + + frame@f9024000 { + frame-number = <2>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9024000 0x1000>; + status = "disabled"; + }; + + frame@f9025000 { + frame-number = <3>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9025000 0x1000>; + status = "disabled"; + }; + + frame@f9026000 { + frame-number = <4>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9026000 0x1000>; + status = "disabled"; + }; + + frame@f9027000 { + frame-number = <5>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9027000 0x1000>; + status = "disabled"; + }; + + frame@f9028000 { + frame-number = <6>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9028000 0x1000>; + status = "disabled"; + }; + }; + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; + + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8994-pinctrl"; + reg = <0xfd510000 0x4000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + blsp1_uart2: serial@f991e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991e000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>; + status = "disabled"; + clock-names = "core", "iface"; + clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>, + <&clock_gcc GCC_BLSP1_AHB_CLK>; + }; + + clock_gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8994"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x2000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0 0>; // bootloader will update + }; +}; + + +#include "msm8992-pins.dtsi" diff --git a/dts/src/arm64/qcom/msm8994-angler-rev-101.dts b/dts/src/arm64/qcom/msm8994-angler-rev-101.dts new file mode 100644 index 0000000000..dfa08f513d --- /dev/null +++ b/dts/src/arm64/qcom/msm8994-angler-rev-101.dts @@ -0,0 +1,40 @@ +/* Copyright (c) 2015, Huawei Inc. All rights reserved. + * Copyright (c) 2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "msm8994.dtsi" + +/ { + model = "Huawei Nexus 6P"; + compatible = "huawei,angler", "qcom,msm8994"; + /* required for bootloader to select correct board */ + qcom,board-id = <8026 0>; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + serial@f991e000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + }; + }; +}; diff --git a/dts/src/arm64/qcom/msm8994-pins.dtsi b/dts/src/arm64/qcom/msm8994-pins.dtsi new file mode 100644 index 0000000000..0e4eea0df2 --- /dev/null +++ b/dts/src/arm64/qcom/msm8994-pins.dtsi @@ -0,0 +1,38 @@ +/* + * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +&msmgpio { + blsp1_uart2_default: blsp1_uart2_default { + pinmux { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; + }; + + blsp1_uart2_sleep: blsp1_uart2_sleep { + pinmux { + function = "gpio"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-pull-down; + }; + }; +}; diff --git a/dts/src/arm64/qcom/msm8994.dtsi b/dts/src/arm64/qcom/msm8994.dtsi new file mode 100644 index 0000000000..f33c41d01c --- /dev/null +++ b/dts/src/arm64/qcom/msm8994.dtsi @@ -0,0 +1,216 @@ +/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8994.h> + +/ { + model = "Qualcomm Technologies, Inc. MSM 8994"; + compatible = "qcom,msm8994"; + // msm-id and pmic-id are required by bootloader for + // proper selection of dt blob + qcom,msm-id = <207 0x20000>; + qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>; + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + }; + }; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 2 0xff08>, + <1 3 0xff08>, + <1 4 0xff08>, + <1 1 0xff08>; + }; + + soc: soc { + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + intc: interrupt-controller@f9000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0xf9000000 0x1000>, + <0xf9002000 0x1000>; + }; + + timer@f9020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xf9020000 0x1000>; + + frame@f9021000 { + frame-number = <0>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9021000 0x1000>, + <0xf9022000 0x1000>; + }; + + frame@f9023000 { + frame-number = <1>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9023000 0x1000>; + status = "disabled"; + }; + + frame@f9024000 { + frame-number = <2>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9024000 0x1000>; + status = "disabled"; + }; + + frame@f9025000 { + frame-number = <3>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9025000 0x1000>; + status = "disabled"; + }; + + frame@f9026000 { + frame-number = <4>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9026000 0x1000>; + status = "disabled"; + }; + + frame@f9027000 { + frame-number = <5>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9027000 0x1000>; + status = "disabled"; + }; + + frame@f9028000 { + frame-number = <6>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xf9028000 0x1000>; + status = "disabled"; + }; + }; + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; + + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8994-pinctrl"; + reg = <0xfd510000 0x4000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + blsp1_uart2: serial@f991e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf991e000 0x1000>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + clock-names = "core", "iface"; + clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>, + <&clock_gcc GCC_BLSP1_AHB_CLK>; + }; + + tcsr_mutex_regs: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; + + clock_gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8994"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x2000>; + }; + }; + + memory { + device_type = "memory"; + // We expect the bootloader to fill in the reg + reg = <0 0 0 0>; + }; + + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + smem_mem: smem_region@6a00000 { + reg = <0x0 0x6a00000 0x0 0x200000>; + no-map; + }; + }; + + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x80>; + #hwlock-cells = <1>; + }; + + qcom,smem@6a00000 { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; +}; + + +#include "msm8994-pins.dtsi" diff --git a/dts/src/arm64/qcom/msm8996.dtsi b/dts/src/arm64/qcom/msm8996.dtsi index 338f82a7fd..9d1d7ad9b0 100644 --- a/dts/src/arm64/qcom/msm8996.dtsi +++ b/dts/src/arm64/qcom/msm8996.dtsi @@ -30,6 +30,42 @@ reg = <0 0 0 0>; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + mba_region: mba@91500000 { + reg = <0x0 0x91500000 0x0 0x200000>; + no-map; + }; + + slpi_region: slpi@90b00000 { + reg = <0x0 0x90b00000 0x0 0xa00000>; + no-map; + }; + + venus_region: venus@90400000 { + reg = <0x0 0x90400000 0x0 0x700000>; + no-map; + }; + + adsp_region: adsp@8ea00000 { + reg = <0x0 0x8ea00000 0x0 0x1a00000>; + no-map; + }; + + mpss_region: mpss@88800000 { + reg = <0x0 0x88800000 0x0 0x6200000>; + no-map; + }; + + smem_mem: smem-mem@86000000 { + reg = <0x0 0x86000000 0x0 0x200000>; + no-map; + }; + }; + cpus { #address-cells = <2>; #size-cells = <0>; @@ -192,14 +228,14 @@ }; clocks { - xo_board { + xo_board: xo_board { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <19200000>; clock-output-names = "xo_board"; }; - sleep_clk { + sleep_clk: sleep_clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32764>; @@ -212,12 +248,29 @@ method = "smc"; }; + tcsr_mutex: hwlock { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_regs 0 0x1000>; + #hwlock-cells = <1>; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; compatible = "simple-bus"; + tcsr_mutex_regs: syscon@740000 { + compatible = "syscon"; + reg = <0x740000 0x20000>; + }; + intc: interrupt-controller@9bc0000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>; @@ -229,6 +282,11 @@ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; + apcs: syscon@9820000 { + compatible = "syscon"; + reg = <0x9820000 0x1000>; + }; + gcc: clock-controller@300000 { compatible = "qcom,gcc-msm8996"; #clock-cells = <1>; @@ -347,9 +405,10 @@ interrupts = <0 125 0>, <0 221 0>; interrupt-names = "hc_irq", "pwr_irq"; - clock-names = "iface", "core"; + clock-names = "iface", "core", "xo"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>; + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; bus-width = <4>; }; @@ -458,5 +517,29 @@ <825000000>; }; }; + + adsp-smp2p { + compatible = "qcom,smp2p"; + qcom,smem = <443>, <429>; + + interrupts = <0 158 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 16 10>; + + qcom,local-pid = <0>; + qcom,remote-pid = <2>; + + adsp_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,state-cells = <1>; + }; + + adsp_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; }; #include "msm8996-pins.dtsi" diff --git a/dts/src/arm64/qcom/pm8916.dtsi b/dts/src/arm64/qcom/pm8916.dtsi index f71679b15d..53deebf9f5 100644 --- a/dts/src/arm64/qcom/pm8916.dtsi +++ b/dts/src/arm64/qcom/pm8916.dtsi @@ -91,9 +91,52 @@ }; pm8916_1: pm8916@1 { - compatible = "qcom,spmi-pmic"; + compatible = "qcom,pm8916", "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + wcd_codec: codec@f000 { + compatible = "qcom,pm8916-wcd-analog-codec"; + reg = <0xf000 0x200>; + reg-names = "pmic-codec-core"; + clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "mclk"; + interrupt-parent = <&spmi_bus>; + interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>, + <0x1 0xf0 0x1 IRQ_TYPE_NONE>, + <0x1 0xf0 0x2 IRQ_TYPE_NONE>, + <0x1 0xf0 0x3 IRQ_TYPE_NONE>, + <0x1 0xf0 0x4 IRQ_TYPE_NONE>, + <0x1 0xf0 0x5 IRQ_TYPE_NONE>, + <0x1 0xf0 0x6 IRQ_TYPE_NONE>, + <0x1 0xf0 0x7 IRQ_TYPE_NONE>, + <0x1 0xf1 0x0 IRQ_TYPE_NONE>, + <0x1 0xf1 0x1 IRQ_TYPE_NONE>, + <0x1 0xf1 0x2 IRQ_TYPE_NONE>, + <0x1 0xf1 0x3 IRQ_TYPE_NONE>, + <0x1 0xf1 0x4 IRQ_TYPE_NONE>, + <0x1 0xf1 0x5 IRQ_TYPE_NONE>; + interrupt-names = "cdc_spk_cnp_int", + "cdc_spk_clip_int", + "cdc_spk_ocp_int", + "mbhc_ins_rem_det1", + "mbhc_but_rel_det", + "mbhc_but_press_det", + "mbhc_ins_rem_det", + "mbhc_switch_int", + "cdc_ear_ocp_int", + "cdc_hphr_ocp_int", + "cdc_hphl_ocp_det", + "cdc_ear_cnp_int", + "cdc_hphr_cnp_int", + "cdc_hphl_cnp_int"; + vdd-cdc-io-supply = <&pm8916_l5>; + vdd-cdc-tx-rx-cx-supply = <&pm8916_l5>; + vdd-micbias-supply = <&pm8916_l13>; + #sound-dai-cells = <1>; + + }; + }; }; diff --git a/dts/src/arm64/qcom/pm8994.dtsi b/dts/src/arm64/qcom/pm8994.dtsi index 1222d2e904..0f1866024a 100644 --- a/dts/src/arm64/qcom/pm8994.dtsi +++ b/dts/src/arm64/qcom/pm8994.dtsi @@ -29,6 +29,7 @@ <0 0xcc 0 IRQ_TYPE_NONE>, <0 0xcd 0 IRQ_TYPE_NONE>, <0 0xce 0 IRQ_TYPE_NONE>, + <0 0xcf 0 IRQ_TYPE_NONE>, <0 0xd0 0 IRQ_TYPE_NONE>, <0 0xd1 0 IRQ_TYPE_NONE>, <0 0xd2 0 IRQ_TYPE_NONE>, diff --git a/dts/src/arm64/renesas/r8a7795-h3ulcb.dts b/dts/src/arm64/renesas/r8a7795-h3ulcb.dts index bcb11a8683..6ffb051742 100644 --- a/dts/src/arm64/renesas/r8a7795-h3ulcb.dts +++ b/dts/src/arm64/renesas/r8a7795-h3ulcb.dts @@ -1,5 +1,5 @@ /* - * Device Tree Source for the H3ULCB board + * Device Tree Source for the H3ULCB (R-Car Starter Kit Premier) board * * Copyright (C) 2016 Renesas Electronics Corp. * Copyright (C) 2016 Cogent Embedded, Inc. @@ -62,6 +62,24 @@ clock-frequency = <24576000>; }; + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -145,18 +163,30 @@ function = "avb"; }; - sdhi0_pins_3v3: sd0_3v3 { + sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; power-source = <3300>; }; - sdhi0_pins_1v8: sd0_1v8 { + sdhi0_pins_uhs: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; power-source = <1800>; }; + sdhi2_pins: sd2 { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + sound_pins: sound { groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; function = "ssi"; @@ -261,8 +291,8 @@ }; &sdhi0 { - pinctrl-0 = <&sdhi0_pins_3v3>; - pinctrl-1 = <&sdhi0_pins_1v8>; + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi0>; @@ -273,6 +303,19 @@ status = "okay"; }; +&sdhi2 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + &ssi1 { shared-pin; }; diff --git a/dts/src/arm64/renesas/r8a7795-salvator-x.dts b/dts/src/arm64/renesas/r8a7795-salvator-x.dts index b1eab6876f..bcaf4008d3 100644 --- a/dts/src/arm64/renesas/r8a7795-salvator-x.dts +++ b/dts/src/arm64/renesas/r8a7795-salvator-x.dts @@ -62,6 +62,24 @@ clock-frequency = <24576000>; }; + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; @@ -191,6 +209,10 @@ remote-endpoint = <&adv7123_in>; }; }; + port@3 { + lvds_connector: endpoint { + }; + }; }; }; @@ -237,11 +259,37 @@ sdhi0_pins: sd0 { groups = "sdhi0_data4", "sdhi0_ctrl"; function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; }; sdhi3_pins: sd3 { groups = "sdhi3_data4", "sdhi3_ctrl"; function = "sdhi3"; + power-source = <3300>; + }; + + sdhi3_pins_uhs: sd3_uhs { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <1800>; }; sound_pins: sound { @@ -261,8 +309,20 @@ }; usb1_pins: usb1 { - groups = "usb1"; - function = "usb1"; + mux { + groups = "usb1"; + function = "usb1"; + }; + + ovc { + pins = "GP_6_27"; + bias-pull-up; + }; + + pwen { + pins = "GP_6_26"; + bias-pull-down; + }; }; usb2_pins: usb2 { @@ -371,25 +431,42 @@ &sdhi0 { pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi0>; vqmmc-supply = <&vccq_sdhi0>; cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + +&sdhi2 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + non-removable; status = "okay"; }; &sdhi3 { pinctrl-0 = <&sdhi3_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdhi3_pins_uhs>; + pinctrl-names = "default", "state_uhs"; vmmc-supply = <&vcc_sdhi3>; vqmmc-supply = <&vccq_sdhi3>; cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; bus-width = <4>; + sd-uhs-sdr50; status = "okay"; }; diff --git a/dts/src/arm64/renesas/r8a7795.dtsi b/dts/src/arm64/renesas/r8a7795.dtsi index 8c15040f25..bbf594bce9 100644 --- a/dts/src/arm64/renesas/r8a7795.dtsi +++ b/dts/src/arm64/renesas/r8a7795.dtsi @@ -321,6 +321,16 @@ #power-domain-cells = <0>; }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7795-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7795-sysc"; reg = <0 0xe6180000 0 0x0400>; @@ -1306,28 +1316,28 @@ }; fcpvb1: fcp@fe92f000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfe92f000 0 0x200>; clocks = <&cpg CPG_MOD 606>; power-domains = <&sysc R8A7795_PD_A3VP>; }; fcpf0: fcp@fe950000 { - compatible = "renesas,r8a7795-fcpf", "renesas,fcpf"; + compatible = "renesas,fcpf"; reg = <0 0xfe950000 0 0x200>; clocks = <&cpg CPG_MOD 615>; power-domains = <&sysc R8A7795_PD_A3VP>; }; fcpf1: fcp@fe951000 { - compatible = "renesas,r8a7795-fcpf", "renesas,fcpf"; + compatible = "renesas,fcpf"; reg = <0 0xfe951000 0 0x200>; clocks = <&cpg CPG_MOD 614>; power-domains = <&sysc R8A7795_PD_A3VP>; }; fcpf2: fcp@fe952000 { - compatible = "renesas,r8a7795-fcpf", "renesas,fcpf"; + compatible = "renesas,fcpf"; reg = <0 0xfe952000 0 0x200>; clocks = <&cpg CPG_MOD 613>; power-domains = <&sysc R8A7795_PD_A3VP>; @@ -1344,7 +1354,7 @@ }; fcpvb0: fcp@fe96f000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfe96f000 0 0x200>; clocks = <&cpg CPG_MOD 607>; power-domains = <&sysc R8A7795_PD_A3VP>; @@ -1361,7 +1371,7 @@ }; fcpvi0: fcp@fe9af000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfe9af000 0 0x200>; clocks = <&cpg CPG_MOD 611>; power-domains = <&sysc R8A7795_PD_A3VP>; @@ -1378,7 +1388,7 @@ }; fcpvi1: fcp@fe9bf000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfe9bf000 0 0x200>; clocks = <&cpg CPG_MOD 610>; power-domains = <&sysc R8A7795_PD_A3VP>; @@ -1395,7 +1405,7 @@ }; fcpvi2: fcp@fe9cf000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfe9cf000 0 0x200>; clocks = <&cpg CPG_MOD 609>; power-domains = <&sysc R8A7795_PD_A3VP>; @@ -1412,7 +1422,7 @@ }; fcpvd0: fcp@fea27000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfea27000 0 0x200>; clocks = <&cpg CPG_MOD 603>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -1429,7 +1439,7 @@ }; fcpvd1: fcp@fea2f000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfea2f000 0 0x200>; clocks = <&cpg CPG_MOD 602>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -1446,7 +1456,7 @@ }; fcpvd2: fcp@fea37000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfea37000 0 0x200>; clocks = <&cpg CPG_MOD 601>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; @@ -1463,7 +1473,7 @@ }; fcpvd3: fcp@fea3f000 { - compatible = "renesas,r8a7795-fcpv", "renesas,fcpv"; + compatible = "renesas,fcpv"; reg = <0 0xfea3f000 0 0x200>; clocks = <&cpg CPG_MOD 600>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; diff --git a/dts/src/arm64/renesas/r8a7796-m3ulcb.dts b/dts/src/arm64/renesas/r8a7796-m3ulcb.dts new file mode 100644 index 0000000000..c3f064ac2c --- /dev/null +++ b/dts/src/arm64/renesas/r8a7796-m3ulcb.dts @@ -0,0 +1,189 @@ +/* + * Device Tree Source for the M3ULCB (R-Car Starter Kit Pro) board + * + * Copyright (C) 2016 Renesas Electronics Corp. + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7796.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Renesas M3ULCB board based on r8a7796"; + compatible = "renesas,m3ulcb", "renesas,r8a7796"; + + aliases { + serial0 = &scif2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x38000000>; + }; + + leds { + compatible = "gpio-leds"; + + led5 { + gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; + }; + led6 { + gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; + }; + }; + + keyboard { + compatible = "gpio-keys"; + + key-1 { + linux,code = <KEY_1>; + label = "SW3"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + }; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; +}; + +&extal_clk { + clock-frequency = <16666666>; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + +&sdhi2 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + +&wdt0 { + timeout-sec = <60>; + status = "okay"; +}; diff --git a/dts/src/arm64/renesas/r8a7796-salvator-x.dts b/dts/src/arm64/renesas/r8a7796-salvator-x.dts index 13db7d61c2..f35e96ca7d 100644 --- a/dts/src/arm64/renesas/r8a7796-salvator-x.dts +++ b/dts/src/arm64/renesas/r8a7796-salvator-x.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "r8a7796.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Renesas Salvator-X board based on r8a7796"; @@ -29,6 +30,72 @@ /* first 128MB is reserved for secure area. */ reg = <0x0 0x48000000 0x0 0x78000000>; }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi3: regulator-vcc-sdhi3 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI3 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi3: regulator-vccq-sdhi3 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI3 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; }; &pfc { @@ -43,12 +110,98 @@ groups = "scif_clk_a"; function = "scif_clk"; }; + + i2c2_pins: i2c2 { + groups = "i2c2_a"; + function = "i2c2"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl"; + function = "sdhi2"; + power-source = <1800>; + }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <3300>; + }; + + sdhi3_pins_uhs: sd3_uhs { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <1800>; + }; }; &extal_clk { clock-frequency = <16666666>; }; +&extalr_clk { + clock-frequency = <32768>; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + +&sdhi2 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-1 = <&sdhi3_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi3>; + vqmmc-supply = <&vccq_sdhi3>; + cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + sd-uhs-sdr50; + status = "okay"; +}; + &scif2 { pinctrl-0 = <&scif2_pins>; pinctrl-names = "default"; @@ -60,6 +213,13 @@ status = "okay"; }; +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &wdt0 { timeout-sec = <60>; status = "okay"; diff --git a/dts/src/arm64/renesas/r8a7796.dtsi b/dts/src/arm64/renesas/r8a7796.dtsi index 9217da9835..28ba59a00c 100644 --- a/dts/src/arm64/renesas/r8a7796.dtsi +++ b/dts/src/arm64/renesas/r8a7796.dtsi @@ -17,6 +17,16 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -233,12 +243,123 @@ #power-domain-cells = <0>; }; + rst: reset-controller@e6160000 { + compatible = "renesas,r8a7796-rst"; + reg = <0 0xe6160000 0 0x0200>; + }; + + prr: chipid@fff00044 { + compatible = "renesas,prr"; + reg = <0 0xfff00044 0 4>; + }; + sysc: system-controller@e6180000 { compatible = "renesas,r8a7796-sysc"; reg = <0 0xe6180000 0 0x0400>; #power-domain-cells = <1>; }; + i2c0: i2c@e6500000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796"; + reg = <0 0xe6500000 0 0x40>; + interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 931>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + dmas = <&dmac1 0x91>, <&dmac1 0x90>, + <&dmac2 0x91>, <&dmac2 0x90>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c1: i2c@e6508000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 930>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + dmas = <&dmac1 0x93>, <&dmac1 0x92>, + <&dmac2 0x93>, <&dmac2 0x92>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c2: i2c@e6510000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796"; + reg = <0 0xe6510000 0 0x40>; + interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 929>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + dmas = <&dmac1 0x95>, <&dmac1 0x94>, + <&dmac2 0x95>, <&dmac2 0x94>; + dma-names = "tx", "rx", "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + + i2c3: i2c@e66d0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796"; + reg = <0 0xe66d0000 0 0x40>; + interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 928>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + dmas = <&dmac0 0x97>, <&dmac0 0x96>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c4: i2c@e66d8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796"; + reg = <0 0xe66d8000 0 0x40>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 927>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + dmas = <&dmac0 0x99>, <&dmac0 0x98>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c5: i2c@e66e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796"; + reg = <0 0xe66e0000 0 0x40>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <110>; + status = "disabled"; + }; + + i2c6: i2c@e66e8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7796"; + reg = <0 0xe66e8000 0 0x40>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 918>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; + dma-names = "tx", "rx"; + i2c-scl-internal-delay-ns = <6>; + status = "disabled"; + }; + scif2: serial@e6e88000 { compatible = "renesas,scif-r8a7796", "renesas,rcar-gen3-scif", "renesas,scif"; @@ -251,5 +372,144 @@ power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; status = "disabled"; }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7796", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x10000>; + interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 219>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac1: dma-controller@e7300000 { + compatible = "renesas,dmac-r8a7796", + "renesas,rcar-dmac"; + reg = <0 0xe7300000 0 0x10000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 218>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + dmac2: dma-controller@e7310000 { + compatible = "renesas,dmac-r8a7796", + "renesas,rcar-dmac"; + reg = <0 0xe7310000 0 0x10000>; + interrupts = <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14", "ch15"; + clocks = <&cpg CPG_MOD 217>; + clock-names = "fck"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <16>; + }; + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7796"; + reg = <0 0xee100000 0 0x2000>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + max-frequency = <200000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a7796"; + reg = <0 0xee120000 0 0x2000>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + max-frequency = <200000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a7796"; + reg = <0 0xee140000 0 0x2000>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + max-frequency = <200000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a7796"; + reg = <0 0xee160000 0 0x2000>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + max-frequency = <200000000>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; }; }; diff --git a/dts/src/arm64/rockchip/rk3368-orion-r68-meta.dts b/dts/src/arm64/rockchip/rk3368-orion-r68-meta.dts index ea0a8eceef..ff5a40399d 100644 --- a/dts/src/arm64/rockchip/rk3368-orion-r68-meta.dts +++ b/dts/src/arm64/rockchip/rk3368-orion-r68-meta.dts @@ -344,7 +344,7 @@ &sdmmc { bus-width = <4>; clock-frequency = <50000000>; - clock-freq-min-max = <400000 50000000>; + max-frequency = <50000000>; cap-sd-highspeed; card-detect-delay = <200>; num-slots = <1>; diff --git a/dts/src/arm64/rockchip/rk3368-px5-evb.dts b/dts/src/arm64/rockchip/rk3368-px5-evb.dts new file mode 100644 index 0000000000..85f7a243d7 --- /dev/null +++ b/dts/src/arm64/rockchip/rk3368-px5-evb.dts @@ -0,0 +1,314 @@ +/* + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3368.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "Rockchip PX5 EVB"; + compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368"; + + chosen { + stdout-path = "serial4:115200n8"; + }; + + memory@0 { + reg = <0x0 0x0 0x0 0x80000000>; + device_type = "memory"; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key>; + + power { + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + vcc_sys: vcc-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&emmc { + status = "okay"; + bus-width = <8>; + cap-mmc-highspeed; + clock-frequency = <150000000>; + disable-wp; + keep-power-in-suspend; + mmc-hs200-1_8v; + no-sdio; + no-sd; + non-removable; + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc18_flash>; +}; + +&i2c0 { + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&pmic_sleep>; + rockchip,system-power-controller; + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc6-supply = <&vcc_sys>; + vcc7-supply = <&vcc_sys>; + vcc8-supply = <&vcc_io>; + vcc9-supply = <&vcc_sys>; + vcc10-supply = <&vcc_sys>; + vcc11-supply = <&vcc_sys>; + vcc12-supply = <&vcc_io>; + clock-output-names = "xin32k", "rk808-clkout2"; + #clock-cells = <1>; + + regulators { + vdd_cpu: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd_cpu"; + }; + + vdd_log: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd_log"; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_ddr"; + }; + + vcc_io: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_io"; + }; + + vcc18_flash: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_flash"; + }; + + vcca_33: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcca_33"; + }; + + vdd_10: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd_10"; + }; + + avdd_33: LDO_REG4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avdd_33"; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + }; + + vdd10_lcd: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-name = "vdd10_lcd"; + }; + + vcc_18: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_18"; + }; + + vcc18_lcd: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc18_lcd"; + }; + + vcc_sd: SWITCH_REG1 { + regulator-name = "vcc_sd"; + }; + + vcc33_lcd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc33_lcd"; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + accelerometer@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + status = "okay"; + + gsl1680: touchscreen@40 { + compatible = "silead,gsl1680"; + reg = <0x40>; + interrupt-parent = <&gpio3>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + power-gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <800>; + touchscreen-size-y = <1280>; + silead,max-fingers = <5>; + }; +}; + +&pinctrl { + keys { + pwr_key: pwr-key { + rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_sleep: pmic-sleep { + rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + }; + + pmic_int: pmic-int { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; + +&sdmmc { + status = "okay"; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + no-emmc; + no-sdio; + num-slots = <1>; + sd-uhs-sdr12; + sd-uhs-sdr25; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_bus4>, <&sdmmc_cd>; + rockchip,default-sample-phase = <90>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; +}; + +&tsadc { + status = "okay"; + rockchip,hw-tshut-mode = <0>; /* CRU */ + rockchip,hw-tshut-polarity = <1>; /* high */ +}; + +&uart4 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/dts/src/arm64/rockchip/rk3368.dtsi b/dts/src/arm64/rockchip/rk3368.dtsi index 0fcb2147c9..a635adc47e 100644 --- a/dts/src/arm64/rockchip/rk3368.dtsi +++ b/dts/src/arm64/rockchip/rk3368.dtsi @@ -231,7 +231,7 @@ sdmmc: dwmmc@ff0c0000 { compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0c0000 0x0 0x4000>; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -243,7 +243,7 @@ sdio0: dwmmc@ff0d0000 { compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0d0000 0x0 0x4000>; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>, <&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>; clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; @@ -255,7 +255,7 @@ emmc: dwmmc@ff0f0000 { compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0f0000 0x0 0x4000>; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -315,16 +315,16 @@ status = "disabled"; }; - i2c1: i2c@ff140000 { + i2c2: i2c@ff140000 { compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; reg = <0x0 0xff140000 0x0 0x1000>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clock-names = "i2c"; - clocks = <&cru PCLK_I2C1>; + clocks = <&cru PCLK_I2C2>; pinctrl-names = "default"; - pinctrl-0 = <&i2c1_xfer>; + pinctrl-0 = <&i2c2_xfer>; status = "disabled"; }; @@ -537,7 +537,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <275>; g-tx-fifo-size = <256 128 128 64 64 32>; - g-use-dma; status = "disabled"; }; @@ -554,16 +553,16 @@ status = "disabled"; }; - i2c2: i2c@ff660000 { + i2c1: i2c@ff660000 { compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; reg = <0x0 0xff660000 0x0 0x1000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; clock-names = "i2c"; - clocks = <&cru PCLK_I2C2>; + clocks = <&cru PCLK_I2C1>; pinctrl-names = "default"; - pinctrl-0 = <&i2c2_xfer>; + pinctrl-0 = <&i2c1_xfer>; status = "disabled"; }; diff --git a/dts/src/arm64/rockchip/rk3399-evb.dts b/dts/src/arm64/rockchip/rk3399-evb.dts index 8e82497925..3040a989d6 100644 --- a/dts/src/arm64/rockchip/rk3399-evb.dts +++ b/dts/src/arm64/rockchip/rk3399-evb.dts @@ -49,6 +49,46 @@ compatible = "rockchip,rk3399-evb", "rockchip,rk3399", "google,rk3399evb-rev2"; + backlight: backlight { + compatible = "pwm-backlight"; + brightness-levels = < + 0 1 2 3 4 5 6 7 + 8 9 10 11 12 13 14 15 + 16 17 18 19 20 21 22 23 + 24 25 26 27 28 29 30 31 + 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 + 48 49 50 51 52 53 54 55 + 56 57 58 59 60 61 62 63 + 64 65 66 67 68 69 70 71 + 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 + 88 89 90 91 92 93 94 95 + 96 97 98 99 100 101 102 103 + 104 105 106 107 108 109 110 111 + 112 113 114 115 116 117 118 119 + 120 121 122 123 124 125 126 127 + 128 129 130 131 132 133 134 135 + 136 137 138 139 140 141 142 143 + 144 145 146 147 148 149 150 151 + 152 153 154 155 156 157 158 159 + 160 161 162 163 164 165 166 167 + 168 169 170 171 172 173 174 175 + 176 177 178 179 180 181 182 183 + 184 185 186 187 188 189 190 191 + 192 193 194 195 196 197 198 199 + 200 201 202 203 204 205 206 207 + 208 209 210 211 212 213 214 215 + 216 217 218 219 220 221 222 223 + 224 225 226 227 228 229 230 231 + 232 233 234 235 236 237 238 239 + 240 241 242 243 244 245 246 247 + 248 249 250 251 252 253 254 255>; + default-brightness-level = <200>; + enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + pwms = <&pwm0 0 25000 0>; + }; + clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; diff --git a/dts/src/arm64/rockchip/rk3399.dtsi b/dts/src/arm64/rockchip/rk3399.dtsi index 7afbfb0f96..c928015d39 100644 --- a/dts/src/arm64/rockchip/rk3399.dtsi +++ b/dts/src/arm64/rockchip/rk3399.dtsi @@ -174,6 +174,7 @@ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>, <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>, <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>; + arm,no-tick-in-suspend; }; xin24m: xin24m { @@ -235,7 +236,7 @@ "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe310000 0x0 0x4000>; interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; @@ -248,11 +249,12 @@ "rockchip,rk3288-dw-mshc"; reg = <0x0 0xfe320000 0x0 0x4000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>; - clock-freq-min-max = <400000 150000000>; + max-frequency = <150000000>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + power-domains = <&power RK3399_PD_SD>; status = "disabled"; }; @@ -269,6 +271,7 @@ #clock-cells = <0>; phys = <&emmc_phy>; phy-names = "phy_arasan"; + power-domains = <&power RK3399_PD_EMMC>; status = "disabled"; }; @@ -693,6 +696,16 @@ status = "disabled"; }; + qos_sd: qos@ffa74000 { + compatible = "syscon"; + reg = <0x0 0xffa74000 0x0 0x20>; + }; + + qos_emmc: qos@ffa58000 { + compatible = "syscon"; + reg = <0x0 0xffa58000 0x0 0x20>; + }; + qos_gmac: qos@ffa5c000 { compatible = "syscon"; reg = <0x0 0xffa5c000 0x0 0x20>; @@ -826,11 +839,23 @@ }; /* These power domains are grouped by VD_LOGIC */ + pd_emmc@RK3399_PD_EMMC { + reg = <RK3399_PD_EMMC>; + clocks = <&cru ACLK_EMMC>; + pm_qos = <&qos_emmc>; + }; pd_gmac@RK3399_PD_GMAC { reg = <RK3399_PD_GMAC>; - clocks = <&cru ACLK_GMAC>; + clocks = <&cru ACLK_GMAC>, + <&cru PCLK_GMAC>; pm_qos = <&qos_gmac>; }; + pd_sd@RK3399_PD_SD { + reg = <RK3399_PD_SD>; + clocks = <&cru HCLK_SDMMC>, + <&cru SCLK_SDMMC>; + pm_qos = <&qos_sd>; + }; pd_vio@RK3399_PD_VIO { reg = <RK3399_PD_VIO>; #address-cells = <1>; @@ -1026,6 +1051,9 @@ clock-names = "pclk_efuse"; /* Data cells */ + cpu_id: cpu-id@7 { + reg = <0x07 0x10>; + }; cpub_leakage: cpu-leakage@17 { reg = <0x17 0x1>; }; @@ -1104,6 +1132,16 @@ interrupt-names = "linestate"; status = "disabled"; }; + + u2phy0_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + status = "disabled"; + }; }; u2phy1: usb2-phy@e460 { @@ -1121,6 +1159,16 @@ interrupt-names = "linestate"; status = "disabled"; }; + + u2phy1_otg: otg-port { + #phy-cells = <0>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "otg-bvalid", "otg-id", + "linestate"; + status = "disabled"; + }; }; emmc_phy: phy@f780 { @@ -1151,6 +1199,7 @@ clock-names = "tcpdcore", "tcpdphy-ref"; assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>; assigned-clock-rates = <50000000>; + power-domains = <&power RK3399_PD_TCPD0>; resets = <&cru SRST_UPHY0>, <&cru SRST_UPHY0_PIPE_L00>, <&cru SRST_P_UPHY0_TCPHY>; @@ -1179,6 +1228,7 @@ clock-names = "tcpdcore", "tcpdphy-ref"; assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>; assigned-clock-rates = <50000000>; + power-domains = <&power RK3399_PD_TCPD1>; resets = <&cru SRST_UPHY1>, <&cru SRST_UPHY1_PIPE_L00>, <&cru SRST_P_UPHY1_TCPHY>; diff --git a/dts/src/arm64/socionext/uniphier-ld11.dtsi b/dts/src/arm64/socionext/uniphier-ld11.dtsi index 3eb4c42ce7..7c7511b9d2 100644 --- a/dts/src/arm64/socionext/uniphier-ld11.dtsi +++ b/dts/src/arm64/socionext/uniphier-ld11.dtsi @@ -43,7 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/memreserve/ 0x80000000 0x00000008; /* cpu-release-addr */ +/memreserve/ 0x80000000 0x00080000; / { compatible = "socionext,uniphier-ld11"; @@ -70,19 +70,60 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x000>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x80000000>; + clocks = <&sys_clk 33>; + enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x001>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x80000000>; + clocks = <&sys_clk 33>; + enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; }; }; + cluster0_opp: opp_table { + compatible = "operating-points-v2"; + opp-shared; + + opp@245000000 { + opp-hz = /bits/ 64 <245000000>; + clock-latency-ns = <300>; + }; + opp@250000000 { + opp-hz = /bits/ 64 <250000000>; + clock-latency-ns = <300>; + }; + opp@490000000 { + opp-hz = /bits/ 64 <490000000>; + clock-latency-ns = <300>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + clock-latency-ns = <300>; + }; + opp@653334000 { + opp-hz = /bits/ 64 <653334000>; + clock-latency-ns = <300>; + }; + opp@666667000 { + opp-hz = /bits/ 64 <666667000>; + clock-latency-ns = <300>; + }; + opp@980000000 { + opp-hz = /bits/ 64 <980000000>; + clock-latency-ns = <300>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + clocks { refclk: ref { compatible = "fixed-clock"; @@ -233,7 +274,7 @@ }; perictrl@59820000 { - compatible = "socionext,uniphier-perictrl", + compatible = "socionext,uniphier-ld11-perictrl", "simple-mfd", "syscon"; reg = <0x59820000 0x200>; @@ -282,7 +323,7 @@ }; mioctrl@5b3e0000 { - compatible = "socionext,uniphier-mioctrl", + compatible = "socionext,uniphier-ld11-mioctrl", "simple-mfd", "syscon"; reg = <0x5b3e0000 0x800>; @@ -299,7 +340,7 @@ }; soc-glue@5f800000 { - compatible = "socionext,uniphier-soc-glue", + compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; @@ -320,7 +361,7 @@ sysctrl@61840000 { compatible = "socionext,uniphier-ld11-sysctrl", "simple-mfd", "syscon"; - reg = <0x61840000 0x4000>; + reg = <0x61840000 0x10000>; sys_clk: clock { compatible = "socionext,uniphier-ld11-clock"; diff --git a/dts/src/arm64/socionext/uniphier-ld20.dtsi b/dts/src/arm64/socionext/uniphier-ld20.dtsi index 56a1b2e92c..fcaecc6bde 100644 --- a/dts/src/arm64/socionext/uniphier-ld20.dtsi +++ b/dts/src/arm64/socionext/uniphier-ld20.dtsi @@ -43,7 +43,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/memreserve/ 0x80000000 0x00000008; /* cpu-release-addr */ +/memreserve/ 0x80000000 0x00080000; / { compatible = "socionext,uniphier-ld20"; @@ -79,35 +79,120 @@ device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0 0x000>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x80000000>; + clocks = <&sys_clk 32>; + enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; }; cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a72", "arm,armv8"; reg = <0 0x001>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x80000000>; + clocks = <&sys_clk 32>; + enable-method = "psci"; + operating-points-v2 = <&cluster0_opp>; }; cpu2: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x100>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x80000000>; + clocks = <&sys_clk 33>; + enable-method = "psci"; + operating-points-v2 = <&cluster1_opp>; }; cpu3: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0 0x101>; - enable-method = "spin-table"; - cpu-release-addr = <0 0x80000000>; + clocks = <&sys_clk 33>; + enable-method = "psci"; + operating-points-v2 = <&cluster1_opp>; }; }; + cluster0_opp: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp@250000000 { + opp-hz = /bits/ 64 <250000000>; + clock-latency-ns = <300>; + }; + opp@275000000 { + opp-hz = /bits/ 64 <275000000>; + clock-latency-ns = <300>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + clock-latency-ns = <300>; + }; + opp@550000000 { + opp-hz = /bits/ 64 <550000000>; + clock-latency-ns = <300>; + }; + opp@666667000 { + opp-hz = /bits/ 64 <666667000>; + clock-latency-ns = <300>; + }; + opp@733334000 { + opp-hz = /bits/ 64 <733334000>; + clock-latency-ns = <300>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + clock-latency-ns = <300>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + clock-latency-ns = <300>; + }; + }; + + cluster1_opp: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp@250000000 { + opp-hz = /bits/ 64 <250000000>; + clock-latency-ns = <300>; + }; + opp@275000000 { + opp-hz = /bits/ 64 <275000000>; + clock-latency-ns = <300>; + }; + opp@500000000 { + opp-hz = /bits/ 64 <500000000>; + clock-latency-ns = <300>; + }; + opp@550000000 { + opp-hz = /bits/ 64 <550000000>; + clock-latency-ns = <300>; + }; + opp@666667000 { + opp-hz = /bits/ 64 <666667000>; + clock-latency-ns = <300>; + }; + opp@733334000 { + opp-hz = /bits/ 64 <733334000>; + clock-latency-ns = <300>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + clock-latency-ns = <300>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + clock-latency-ns = <300>; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + clocks { refclk: ref { compatible = "fixed-clock"; @@ -274,7 +359,7 @@ }; perictrl@59820000 { - compatible = "socionext,uniphier-perictrl", + compatible = "socionext,uniphier-ld20-perictrl", "simple-mfd", "syscon"; reg = <0x59820000 0x200>; @@ -290,7 +375,7 @@ }; soc-glue@5f800000 { - compatible = "socionext,uniphier-soc-glue", + compatible = "socionext,uniphier-ld20-soc-glue", "simple-mfd", "syscon"; reg = <0x5f800000 0x2000>; @@ -309,9 +394,9 @@ }; sysctrl@61840000 { - compatible = "socionext,uniphier-sysctrl", + compatible = "socionext,uniphier-ld20-sysctrl", "simple-mfd", "syscon"; - reg = <0x61840000 0x4000>; + reg = <0x61840000 0x10000>; sys_clk: clock { compatible = "socionext,uniphier-ld20-clock"; diff --git a/dts/src/arm64/zte/zx296718.dtsi b/dts/src/arm64/zte/zx296718.dtsi index a223066f24..88ff70a060 100644 --- a/dts/src/arm64/zte/zx296718.dtsi +++ b/dts/src/arm64/zte/zx296718.dtsi @@ -239,16 +239,9 @@ compatible = "arm,gic-v3"; #interrupt-cells = <3>; #address-cells = <0>; - #redistributor-regions = <6>; - redistributor-stride = <0x0 0x40000>; interrupt-controller; reg = <0x02a00000 0x10000>, - <0x02b00000 0x20000>, - <0x02b20000 0x20000>, - <0x02b40000 0x20000>, - <0x02b60000 0x20000>, - <0x02b80000 0x20000>, - <0x02ba0000 0x20000>; + <0x02b00000 0xc0000>; interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; }; @@ -284,9 +277,33 @@ dma-requests = <32>; }; + lsp0crm: clock-controller@1420000 { + compatible = "zte,zx296718-lsp0crm"; + reg = <0x01420000 0x1000>; + #clock-cells = <1>; + }; + + lsp1crm: clock-controller@1430000 { + compatible = "zte,zx296718-lsp1crm"; + reg = <0x01430000 0x1000>; + #clock-cells = <1>; + }; + + topcrm: clock-controller@1461000 { + compatible = "zte,zx296718-topcrm"; + reg = <0x01461000 0x1000>; + #clock-cells = <1>; + }; + sysctrl: sysctrl@1463000 { compatible = "zte,zx296718-sysctrl", "syscon"; reg = <0x1463000 0x1000>; }; + + audiocrm: clock-controller@1480000 { + compatible = "zte,zx296718-audiocrm"; + reg = <0x01480000 0x1000>; + #clock-cells = <1>; + }; }; }; diff --git a/dts/src/mips/ingenic/jz4740.dtsi b/dts/src/mips/ingenic/jz4740.dtsi index f6ae6ed9c4..3e1587f1f7 100644 --- a/dts/src/mips/ingenic/jz4740.dtsi +++ b/dts/src/mips/ingenic/jz4740.dtsi @@ -44,6 +44,17 @@ #clock-cells = <1>; }; + rtc_dev: rtc@10003000 { + compatible = "ingenic,jz4740-rtc"; + reg = <0x10003000 0x40>; + + interrupt-parent = <&intc>; + interrupts = <15>; + + clocks = <&cgu JZ4740_CLK_RTC>; + clock-names = "rtc"; + }; + uart0: serial@10030000 { compatible = "ingenic,jz4740-uart"; reg = <0x10030000 0x100>; diff --git a/dts/src/mips/ingenic/qi_lb60.dts b/dts/src/mips/ingenic/qi_lb60.dts index 2414d63ae8..be1a7d3a3e 100644 --- a/dts/src/mips/ingenic/qi_lb60.dts +++ b/dts/src/mips/ingenic/qi_lb60.dts @@ -13,3 +13,7 @@ &ext { clock-frequency = <12000000>; }; + +&rtc_dev { + system-power-controller; +}; diff --git a/dts/src/powerpc/fsl/t1023rdb.dts b/dts/src/powerpc/fsl/t1023rdb.dts index 29757623e5..5ba6fbfca2 100644 --- a/dts/src/powerpc/fsl/t1023rdb.dts +++ b/dts/src/powerpc/fsl/t1023rdb.dts @@ -41,6 +41,27 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + ifc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x2000>; ranges = <0 0 0xf 0xe8000000 0x08000000 @@ -72,6 +93,14 @@ ranges = <0x00000000 0xf 0x00000000 0x01072000>; }; + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + soc: soc@ffe000000 { ranges = <0x00000000 0xf 0xfe000000 0x1000000>; reg = <0xf 0xfe000000 0 0x00001000>; diff --git a/dts/src/powerpc/fsl/t1023si-post.dtsi b/dts/src/powerpc/fsl/t1023si-post.dtsi index 6e0b4892a7..da2894c594 100644 --- a/dts/src/powerpc/fsl/t1023si-post.dtsi +++ b/dts/src/powerpc/fsl/t1023si-post.dtsi @@ -34,6 +34,21 @@ #include <dt-bindings/thermal/thermal.h> +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&qman_fqd { + compatible = "fsl,qman-fqd"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&qman_pfdr { + compatible = "fsl,qman-pfdr"; + alloc-ranges = <0 0 0x10000 0>; +}; + &ifc { #address-cells = <2>; #size-cells = <1>; @@ -180,6 +195,92 @@ }; }; +&bportals { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + + bman-portal@0 { + cell-index = <0x0>; + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x1000000 0x1000>; + interrupts = <105 2 0 0>; + }; + bman-portal@4000 { + cell-index = <0x1>; + compatible = "fsl,bman-portal"; + reg = <0x4000 0x4000>, <0x1001000 0x1000>; + interrupts = <107 2 0 0>; + }; + bman-portal@8000 { + cell-index = <2>; + compatible = "fsl,bman-portal"; + reg = <0x8000 0x4000>, <0x1002000 0x1000>; + interrupts = <109 2 0 0>; + }; + bman-portal@c000 { + cell-index = <0x3>; + compatible = "fsl,bman-portal"; + reg = <0xc000 0x4000>, <0x1003000 0x1000>; + interrupts = <111 2 0 0>; + }; + bman-portal@10000 { + cell-index = <0x4>; + compatible = "fsl,bman-portal"; + reg = <0x10000 0x4000>, <0x1004000 0x1000>; + interrupts = <113 2 0 0>; + }; + bman-portal@14000 { + cell-index = <0x5>; + compatible = "fsl,bman-portal"; + reg = <0x14000 0x4000>, <0x1005000 0x1000>; + interrupts = <115 2 0 0>; + }; +}; + +&qportals { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + + qportal0: qman-portal@0 { + compatible = "fsl,qman-portal"; + reg = <0x0 0x4000>, <0x1000000 0x1000>; + interrupts = <104 0x2 0 0>; + cell-index = <0x0>; + }; + qportal1: qman-portal@4000 { + compatible = "fsl,qman-portal"; + reg = <0x4000 0x4000>, <0x1001000 0x1000>; + interrupts = <106 0x2 0 0>; + cell-index = <0x1>; + }; + qportal2: qman-portal@8000 { + compatible = "fsl,qman-portal"; + reg = <0x8000 0x4000>, <0x1002000 0x1000>; + interrupts = <108 0x2 0 0>; + cell-index = <0x2>; + }; + qportal3: qman-portal@c000 { + compatible = "fsl,qman-portal"; + reg = <0xc000 0x4000>, <0x1003000 0x1000>; + interrupts = <110 0x2 0 0>; + cell-index = <0x3>; + }; + qportal4: qman-portal@10000 { + compatible = "fsl,qman-portal"; + reg = <0x10000 0x4000>, <0x1004000 0x1000>; + interrupts = <112 0x2 0 0>; + cell-index = <0x4>; + }; + qportal5: qman-portal@14000 { + compatible = "fsl,qman-portal"; + reg = <0x14000 0x4000>, <0x1005000 0x1000>; + interrupts = <114 0x2 0 0>; + cell-index = <0x5>; + }; +}; + &soc { #address-cells = <1>; #size-cells = <1>; @@ -413,6 +514,8 @@ }; /include/ "qoriq-sec5.0-0.dtsi" +/include/ "qoriq-qman3.dtsi" +/include/ "qoriq-bman1.dtsi" /include/ "qoriq-fman3l-0.dtsi" /include/ "qoriq-fman3-0-10g-0-best-effort.dtsi" diff --git a/dts/src/powerpc/fsl/t1024qds.dts b/dts/src/powerpc/fsl/t1024qds.dts index 772143da36..d6858b7cd9 100644 --- a/dts/src/powerpc/fsl/t1024qds.dts +++ b/dts/src/powerpc/fsl/t1024qds.dts @@ -41,6 +41,27 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + ifc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x2000>; ranges = <0 0 0xf 0xe8000000 0x08000000 @@ -80,6 +101,14 @@ ranges = <0x00000000 0xf 0x00000000 0x01072000>; }; + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + soc: soc@ffe000000 { ranges = <0x00000000 0xf 0xfe000000 0x1000000>; reg = <0xf 0xfe000000 0 0x00001000>; diff --git a/dts/src/powerpc/fsl/t1024rdb.dts b/dts/src/powerpc/fsl/t1024rdb.dts index 302cdd22b4..73a645324b 100644 --- a/dts/src/powerpc/fsl/t1024rdb.dts +++ b/dts/src/powerpc/fsl/t1024rdb.dts @@ -41,6 +41,31 @@ #size-cells = <2>; interrupt-parent = <&mpic>; + aliases { + sg_2500_aqr105_phy4 = &sg_2500_aqr105_phy4; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + + qman_fqd: qman-fqd { + size = <0 0x400000>; + alignment = <0 0x400000>; + }; + + qman_pfdr: qman-pfdr { + size = <0 0x2000000>; + alignment = <0 0x2000000>; + }; + }; + ifc: localbus@ffe124000 { reg = <0xf 0xfe124000 0 0x2000>; ranges = <0 0 0xf 0xe8000000 0x08000000 @@ -82,6 +107,14 @@ ranges = <0x00000000 0xf 0x00000000 0x01072000>; }; + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + qportals: qman-portals@ff6000000 { + ranges = <0x0 0xf 0xf6000000 0x2000000>; + }; + soc: soc@ffe000000 { ranges = <0x00000000 0xf 0xfe000000 0x1000000>; reg = <0xf 0xfe000000 0 0x00001000>; diff --git a/dts/src/powerpc/fsl/t1042d4rdb.dts b/dts/src/powerpc/fsl/t1042d4rdb.dts index 2a5a90dd27..fcd2aeb5b8 100644 --- a/dts/src/powerpc/fsl/t1042d4rdb.dts +++ b/dts/src/powerpc/fsl/t1042d4rdb.dts @@ -48,6 +48,58 @@ "fsl,deepsleep-cpld"; }; }; + + soc: soc@ffe000000 { + fman0: fman@400000 { + ethernet@e0000 { + phy-handle = <&phy_sgmii_0>; + phy-connection-type = "sgmii"; + }; + + ethernet@e2000 { + phy-handle = <&phy_sgmii_1>; + phy-connection-type = "sgmii"; + }; + + ethernet@e4000 { + phy-handle = <&phy_sgmii_2>; + phy-connection-type = "sgmii"; + }; + + ethernet@e6000 { + phy-handle = <&phy_rgmii_0>; + phy-connection-type = "rgmii"; + }; + + ethernet@e8000 { + phy-handle = <&phy_rgmii_1>; + phy-connection-type = "rgmii"; + }; + + mdio0: mdio@fc000 { + phy_sgmii_0: ethernet-phy@02 { + reg = <0x02>; + }; + + phy_sgmii_1: ethernet-phy@03 { + reg = <0x03>; + }; + + phy_sgmii_2: ethernet-phy@01 { + reg = <0x01>; + }; + + phy_rgmii_0: ethernet-phy@04 { + reg = <0x04>; + }; + + phy_rgmii_1: ethernet-phy@05 { + reg = <0x05>; + }; + }; + }; + }; + }; #include "t1042si-post.dtsi" diff --git a/dts/src/powerpc/fsl/t4240rdb.dts b/dts/src/powerpc/fsl/t4240rdb.dts index cc0a264b8a..8166c66071 100644 --- a/dts/src/powerpc/fsl/t4240rdb.dts +++ b/dts/src/powerpc/fsl/t4240rdb.dts @@ -125,6 +125,10 @@ }; i2c@118000 { + hwmon@2f { + compatible = "winbond,w83793"; + reg = <0x2f>; + }; eeprom@52 { compatible = "at24,24c256"; reg = <0x52>; diff --git a/dts/src/xtensa/kc705.dts b/dts/src/xtensa/kc705.dts index b1f4ee8c9a..6106bdc097 100644 --- a/dts/src/xtensa/kc705.dts +++ b/dts/src/xtensa/kc705.dts @@ -11,4 +11,20 @@ device_type = "memory"; reg = <0x00000000 0x38000000>; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x04000000>; + alignment = <0x2000>; + alloc-ranges = <0x00000000 0x20000000>; + linux,cma-default; + }; + }; }; |