diff options
Diffstat (limited to 'include/configs/ml300.h')
-rw-r--r-- | include/configs/ml300.h | 171 |
1 files changed, 0 insertions, 171 deletions
diff --git a/include/configs/ml300.h b/include/configs/ml300.h deleted file mode 100644 index 6762cd61ea..0000000000 --- a/include/configs/ml300.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * ML300.h: ML300 specific config options - * - * http://www.xilinx.com/ml300 - * - * Derived from : ML2.h - * - * Author: Xilinx, Inc. - * - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * - * XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A - * COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS - * ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD, - * XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE - * FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR - * OBTAINING ANY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION. - * XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO - * THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY - * WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM - * CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND - * FITNESS FOR A PARTICULAR PURPOSE. - * - * - * Xilinx products are not intended for use in life support appliances, - * devices, or systems. Use in such applications is expressly prohibited. - * - * - * (c) Copyright 2002 Xilinx Inc. - * All rights reserved. - * - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* #define DEBUG */ -/* #define ET_DEBUG 1 */ - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_405 1 /* This is a PPC405 CPU */ -#define CONFIG_4xx 1 /* ...member of PPC4xx family */ -#define CONFIG_XILINX_ML300 1 /* ...on a Xilinx ML300 board */ - -#define CONFIG_SYSTEMACE 1 -#define CONFIG_DOS_PARTITION 1 -#define CFG_SYSTEMACE_BASE XPAR_OPB_SYSACE_0_BASEADDR -#define CFG_SYSTEMACE_WIDTH XPAR_XSYSACE_MEM_WIDTH - -#define CFG_ENV_IS_IN_EEPROM 1 /* environment is in EEPROM */ - -/* following are used only if env is in EEPROM */ -#ifdef CFG_ENV_IS_IN_EEPROM -#define CFG_I2C_EEPROM_ADDR XPAR_PERSISTENT_0_IIC_0_EEPROMADDR -#define CFG_I2C_EEPROM_ADDR_LEN 1 -#define CFG_ENV_OFFSET XPAR_PERSISTENT_0_IIC_0_BASEADDR -#define CONFIG_MISC_INIT_R 1 /* used to call out convert_env() */ -#define CONFIG_ENV_OVERWRITE 1 /* allow users to update ethaddr and serial# */ -#endif - -#include "../board/xilinx/ml300/xparameters.h" - -#define CFG_NO_FLASH 1 /* no flash */ -#define CFG_ENV_SIZE XPAR_PERSISTENT_0_IIC_0_HIGHADDR - XPAR_PERSISTENT_0_IIC_0_BASEADDR + 1 -#define CONFIG_BAUDRATE 9600 -#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ - -#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */ - -#define CONFIG_BOOTARGS "console=ttyS0,9600 ip=off " \ - "root=/dev/xsysace/disc0/part3 rw" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define REMOVE_COMMANDS (CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_FAT | \ - CFG_CMD_IMLS ) -#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_NET) \ - & ~REMOVE_COMMANDS) - -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -/* #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ */ -/* 300000000 */ - -/* - * Miscellaneous configurable options - */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ - -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ - -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CFG_DUART_CHAN 0 -#define CFG_NS16550_REG_SIZE -4 -#define CFG_NS16550 1 -#define CFG_INIT_CHAN1 1 - -/* The following table includes the supported baudrates */ -#define CFG_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} - -#define CFG_LOAD_ADDR 0x400000 /* default load address */ -#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 - */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_MONITOR_BASE 0x04000000 -#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs */ -#define CFG_CACHELINE_SIZE 32 /* ... */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ - -#define CFG_INIT_RAM_ADDR 0x800000 /* inside of SDRAM */ -#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET - -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - -#endif /* __CONFIG_H */ |