diff options
Diffstat (limited to 'include/uapi/linux/virtio_net.h')
| -rw-r--r-- | include/uapi/linux/virtio_net.h | 358 |
1 files changed, 358 insertions, 0 deletions
diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h new file mode 100644 index 0000000000..c1896b1cfc --- /dev/null +++ b/include/uapi/linux/virtio_net.h @@ -0,0 +1,358 @@ +#ifndef _UAPI_LINUX_VIRTIO_NET_H +#define _UAPI_LINUX_VIRTIO_NET_H +/* This header is BSD licensed so anyone can use the definitions to implement + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ +#include <linux/types.h> +#include <linux/virtio_ids.h> +#include <linux/virtio_config.h> +#include <linux/virtio_types.h> +#include <net.h> + +/* The feature bitmap for virtio net */ +#define VIRTIO_NET_F_CSUM 0 /* Host handles pkts w/ partial csum */ +#define VIRTIO_NET_F_GUEST_CSUM 1 /* Guest handles pkts w/ partial csum */ +#define VIRTIO_NET_F_CTRL_GUEST_OFFLOADS 2 /* Dynamic offload configuration. */ +#define VIRTIO_NET_F_MTU 3 /* Initial MTU advice */ +#define VIRTIO_NET_F_MAC 5 /* Host has given MAC address. */ +#define VIRTIO_NET_F_GUEST_TSO4 7 /* Guest can handle TSOv4 in. */ +#define VIRTIO_NET_F_GUEST_TSO6 8 /* Guest can handle TSOv6 in. */ +#define VIRTIO_NET_F_GUEST_ECN 9 /* Guest can handle TSO[6] w/ ECN in. */ +#define VIRTIO_NET_F_GUEST_UFO 10 /* Guest can handle UFO in. */ +#define VIRTIO_NET_F_HOST_TSO4 11 /* Host can handle TSOv4 in. */ +#define VIRTIO_NET_F_HOST_TSO6 12 /* Host can handle TSOv6 in. */ +#define VIRTIO_NET_F_HOST_ECN 13 /* Host can handle TSO[6] w/ ECN in. */ +#define VIRTIO_NET_F_HOST_UFO 14 /* Host can handle UFO in. */ +#define VIRTIO_NET_F_MRG_RXBUF 15 /* Host can merge receive buffers. */ +#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */ +#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */ +#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */ +#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */ +#define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */ +#define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the + * network */ +#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow + * Steering */ +#define VIRTIO_NET_F_CTRL_MAC_ADDR 23 /* Set MAC address */ + +#define VIRTIO_NET_F_HASH_REPORT 57 /* Supports hash report */ +#define VIRTIO_NET_F_RSS 60 /* Supports RSS RX steering */ +#define VIRTIO_NET_F_RSC_EXT 61 /* extended coalescing info */ +#define VIRTIO_NET_F_STANDBY 62 /* Act as standby for another device + * with the same MAC. + */ +#define VIRTIO_NET_F_SPEED_DUPLEX 63 /* Device set linkspeed and duplex */ + +#ifndef VIRTIO_NET_NO_LEGACY +#define VIRTIO_NET_F_GSO 6 /* Host handles pkts w/ any GSO type */ +#endif /* VIRTIO_NET_NO_LEGACY */ + +#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ +#define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */ + +/* supported/enabled hash types */ +#define VIRTIO_NET_RSS_HASH_TYPE_IPv4 (1 << 0) +#define VIRTIO_NET_RSS_HASH_TYPE_TCPv4 (1 << 1) +#define VIRTIO_NET_RSS_HASH_TYPE_UDPv4 (1 << 2) +#define VIRTIO_NET_RSS_HASH_TYPE_IPv6 (1 << 3) +#define VIRTIO_NET_RSS_HASH_TYPE_TCPv6 (1 << 4) +#define VIRTIO_NET_RSS_HASH_TYPE_UDPv6 (1 << 5) +#define VIRTIO_NET_RSS_HASH_TYPE_IP_EX (1 << 6) +#define VIRTIO_NET_RSS_HASH_TYPE_TCP_EX (1 << 7) +#define VIRTIO_NET_RSS_HASH_TYPE_UDP_EX (1 << 8) + +struct virtio_net_config { + /* The config defining mac address (if VIRTIO_NET_F_MAC) */ + __u8 mac[ETH_ALEN]; + /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */ + __virtio16 status; + /* Maximum number of each of transmit and receive queues; + * see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ. + * Legal values are between 1 and 0x8000 + */ + __virtio16 max_virtqueue_pairs; + /* Default maximum transmit unit advice */ + __virtio16 mtu; + /* + * speed, in units of 1Mb. All values 0 to INT_MAX are legal. + * Any other value stands for unknown. + */ + __le32 speed; + /* + * 0x00 - half duplex + * 0x01 - full duplex + * Any other value stands for unknown. + */ + __u8 duplex; + /* maximum size of RSS key */ + __u8 rss_max_key_size; + /* maximum number of indirection table entries */ + __le16 rss_max_indirection_table_length; + /* bitmask of supported VIRTIO_NET_RSS_HASH_ types */ + __le32 supported_hash_types; +} __attribute__((packed)); + +/* + * This header comes first in the scatter-gather list. If you don't + * specify GSO or CSUM features, you can simply ignore the header. + * + * This is bitwise-equivalent to the legacy struct virtio_net_hdr_mrg_rxbuf, + * only flattened. + */ +struct virtio_net_hdr_v1 { +#define VIRTIO_NET_HDR_F_NEEDS_CSUM 1 /* Use csum_start, csum_offset */ +#define VIRTIO_NET_HDR_F_DATA_VALID 2 /* Csum is valid */ +#define VIRTIO_NET_HDR_F_RSC_INFO 4 /* rsc info in csum_ fields */ + __u8 flags; +#define VIRTIO_NET_HDR_GSO_NONE 0 /* Not a GSO frame */ +#define VIRTIO_NET_HDR_GSO_TCPV4 1 /* GSO frame, IPv4 TCP (TSO) */ +#define VIRTIO_NET_HDR_GSO_UDP 3 /* GSO frame, IPv4 UDP (UFO) */ +#define VIRTIO_NET_HDR_GSO_TCPV6 4 /* GSO frame, IPv6 TCP */ +#define VIRTIO_NET_HDR_GSO_ECN 0x80 /* TCP has ECN set */ + __u8 gso_type; + __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ + __virtio16 gso_size; /* Bytes to append to hdr_len per frame */ + union { + struct { + __virtio16 csum_start; + __virtio16 csum_offset; + }; + /* Checksum calculation */ + struct { + /* Position to start checksumming from */ + __virtio16 start; + /* Offset after that to place checksum */ + __virtio16 offset; + } csum; + /* Receive Segment Coalescing */ + struct { + /* Number of coalesced segments */ + __le16 segments; + /* Number of duplicated acks */ + __le16 dup_acks; + } rsc; + }; + __virtio16 num_buffers; /* Number of merged rx buffers */ +}; + +struct virtio_net_hdr_v1_hash { + struct virtio_net_hdr_v1 hdr; + __le32 hash_value; +#define VIRTIO_NET_HASH_REPORT_NONE 0 +#define VIRTIO_NET_HASH_REPORT_IPv4 1 +#define VIRTIO_NET_HASH_REPORT_TCPv4 2 +#define VIRTIO_NET_HASH_REPORT_UDPv4 3 +#define VIRTIO_NET_HASH_REPORT_IPv6 4 +#define VIRTIO_NET_HASH_REPORT_TCPv6 5 +#define VIRTIO_NET_HASH_REPORT_UDPv6 6 +#define VIRTIO_NET_HASH_REPORT_IPv6_EX 7 +#define VIRTIO_NET_HASH_REPORT_TCPv6_EX 8 +#define VIRTIO_NET_HASH_REPORT_UDPv6_EX 9 + __le16 hash_report; + __le16 padding; +}; + +#ifndef VIRTIO_NET_NO_LEGACY +/* This header comes first in the scatter-gather list. + * For legacy virtio, if VIRTIO_F_ANY_LAYOUT is not negotiated, it must + * be the first element of the scatter-gather list. If you don't + * specify GSO or CSUM features, you can simply ignore the header. */ +struct virtio_net_hdr { + /* See VIRTIO_NET_HDR_F_* */ + __u8 flags; + /* See VIRTIO_NET_HDR_GSO_* */ + __u8 gso_type; + __virtio16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ + __virtio16 gso_size; /* Bytes to append to hdr_len per frame */ + __virtio16 csum_start; /* Position to start checksumming from */ + __virtio16 csum_offset; /* Offset after that to place checksum */ +}; + +/* This is the version of the header to use when the MRG_RXBUF + * feature has been negotiated. */ +struct virtio_net_hdr_mrg_rxbuf { + struct virtio_net_hdr hdr; + __virtio16 num_buffers; /* Number of merged rx buffers */ +}; +#endif /* ...VIRTIO_NET_NO_LEGACY */ + +/* + * Control virtqueue data structures + * + * The control virtqueue expects a header in the first sg entry + * and an ack/status response in the last entry. Data for the + * command goes in between. + */ +struct virtio_net_ctrl_hdr { + __u8 class; + __u8 cmd; +} __attribute__((packed)); + +typedef __u8 virtio_net_ctrl_ack; + +#define VIRTIO_NET_OK 0 +#define VIRTIO_NET_ERR 1 + +/* + * Control the RX mode, ie. promisucous, allmulti, etc... + * All commands require an "out" sg entry containing a 1 byte + * state value, zero = disable, non-zero = enable. Commands + * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature. + * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA. + */ +#define VIRTIO_NET_CTRL_RX 0 + #define VIRTIO_NET_CTRL_RX_PROMISC 0 + #define VIRTIO_NET_CTRL_RX_ALLMULTI 1 + #define VIRTIO_NET_CTRL_RX_ALLUNI 2 + #define VIRTIO_NET_CTRL_RX_NOMULTI 3 + #define VIRTIO_NET_CTRL_RX_NOUNI 4 + #define VIRTIO_NET_CTRL_RX_NOBCAST 5 + +/* + * Control the MAC + * + * The MAC filter table is managed by the hypervisor, the guest should + * assume the size is infinite. Filtering should be considered + * non-perfect, ie. based on hypervisor resources, the guest may + * received packets from sources not specified in the filter list. + * + * In addition to the class/cmd header, the TABLE_SET command requires + * two out scatterlists. Each contains a 4 byte count of entries followed + * by a concatenated byte stream of the ETH_ALEN MAC addresses. The + * first sg list contains unicast addresses, the second is for multicast. + * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature + * is available. + * + * The ADDR_SET command requests one out scatterlist, it contains a + * 6 bytes MAC address. This functionality is present if the + * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available. + */ +struct virtio_net_ctrl_mac { + __virtio32 entries; + __u8 macs[][ETH_ALEN]; +} __attribute__((packed)); + +#define VIRTIO_NET_CTRL_MAC 1 + #define VIRTIO_NET_CTRL_MAC_TABLE_SET 0 + #define VIRTIO_NET_CTRL_MAC_ADDR_SET 1 + +/* + * Control VLAN filtering + * + * The VLAN filter table is controlled via a simple ADD/DEL interface. + * VLAN IDs not added may be filterd by the hypervisor. Del is the + * opposite of add. Both commands expect an out entry containing a 2 + * byte VLAN ID. VLAN filterting is available with the + * VIRTIO_NET_F_CTRL_VLAN feature bit. + */ +#define VIRTIO_NET_CTRL_VLAN 2 + #define VIRTIO_NET_CTRL_VLAN_ADD 0 + #define VIRTIO_NET_CTRL_VLAN_DEL 1 + +/* + * Control link announce acknowledgement + * + * The command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that + * driver has recevied the notification; device would clear the + * VIRTIO_NET_S_ANNOUNCE bit in the status field after it receives + * this command. + */ +#define VIRTIO_NET_CTRL_ANNOUNCE 3 + #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0 + +/* + * Control Receive Flow Steering + */ +#define VIRTIO_NET_CTRL_MQ 4 +/* + * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET + * enables Receive Flow Steering, specifying the number of the transmit and + * receive queues that will be used. After the command is consumed and acked by + * the device, the device will not steer new packets on receive virtqueues + * other than specified nor read from transmit virtqueues other than specified. + * Accordingly, driver should not transmit new packets on virtqueues other than + * specified. + */ +struct virtio_net_ctrl_mq { + __virtio16 virtqueue_pairs; +}; + + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0 + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1 + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000 + +/* + * The command VIRTIO_NET_CTRL_MQ_RSS_CONFIG has the same effect as + * VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET does and additionally configures + * the receive steering to use a hash calculated for incoming packet + * to decide on receive virtqueue to place the packet. The command + * also provides parameters to calculate a hash and receive virtqueue. + */ +struct virtio_net_rss_config { + __le32 hash_types; + __le16 indirection_table_mask; + __le16 unclassified_queue; + __le16 indirection_table[1/* + indirection_table_mask */]; + __le16 max_tx_vq; + __u8 hash_key_length; + __u8 hash_key_data[/* hash_key_length */]; +}; + + #define VIRTIO_NET_CTRL_MQ_RSS_CONFIG 1 + +/* + * The command VIRTIO_NET_CTRL_MQ_HASH_CONFIG requests the device + * to include in the virtio header of the packet the value of the + * calculated hash and the report type of hash. It also provides + * parameters for hash calculation. The command requires feature + * VIRTIO_NET_F_HASH_REPORT to be negotiated to extend the + * layout of virtio header as defined in virtio_net_hdr_v1_hash. + */ +struct virtio_net_hash_config { + __le32 hash_types; + /* for compatibility with virtio_net_rss_config */ + __le16 reserved[4]; + __u8 hash_key_length; + __u8 hash_key_data[/* hash_key_length */]; +}; + + #define VIRTIO_NET_CTRL_MQ_HASH_CONFIG 2 + +/* + * Control network offloads + * + * Reconfigures the network offloads that Guest can handle. + * + * Available with the VIRTIO_NET_F_CTRL_GUEST_OFFLOADS feature bit. + * + * Command data format matches the feature bit mask exactly. + * + * See VIRTIO_NET_F_GUEST_* for the list of offloads + * that can be enabled/disabled. + */ +#define VIRTIO_NET_CTRL_GUEST_OFFLOADS 5 +#define VIRTIO_NET_CTRL_GUEST_OFFLOADS_SET 0 + +#endif /* _UAPI_LINUX_VIRTIO_NET_H */ |