diff options
Diffstat (limited to 'include/usb/ulpi.h')
| -rw-r--r-- | include/usb/ulpi.h | 59 |
1 files changed, 0 insertions, 59 deletions
diff --git a/include/usb/ulpi.h b/include/usb/ulpi.h deleted file mode 100644 index e45ea6e0f9..0000000000 --- a/include/usb/ulpi.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef __MACH_ULPI_H -#define __MACH_ULPI_H - -int ulpi_write(u8 bits, int reg, void __iomem *view); -int ulpi_set(u8 bits, int reg, void __iomem *view); -int ulpi_clear(u8 bits, int reg, void __iomem *view); -int ulpi_read(int reg, void __iomem *view); -int ulpi_setup(void __iomem *view, int on); - -/* ULPI register addresses */ -#define ULPI_VID_LOW 0x00 /* Vendor ID low */ -#define ULPI_VID_HIGH 0x01 /* Vendor ID high */ -#define ULPI_PID_LOW 0x02 /* Product ID low */ -#define ULPI_PID_HIGH 0x03 /* Product ID high */ -#define ULPI_FUNCTION_CTRL 0x04 -#define ULPI_ITFCTL 0x07 /* Interface Control */ -#define ULPI_OTGCTL 0x0A /* OTG Control */ - -/* add to above register address to access Set/Clear functions */ -#define ULPI_REG_SET 0x01 -#define ULPI_REG_CLEAR 0x02 - -/* Function Control */ -#define ULPI_FC_XCVRSEL_MASK (3 << 0) -#define ULPI_FC_HIGH_SPEED (0 << 0) -#define ULPI_FC_FULL_SPEED (1 << 0) -#define ULPI_FC_LOW_SPEED (2 << 0) -#define ULPI_FC_FS4LS (3 << 0) -#define ULPI_FC_TERMSELECT (1 << 2) -#define ULPI_FC_OPMODE_MASK (3 << 3) -#define ULPI_FC_OPMODE_NORMAL (0 << 3) -#define ULPI_FC_OPMODE_NONDRIVING (1 << 3) -#define ULPI_FC_OPMODE_DISABLE_NRZI (2 << 3) -#define ULPI_FC_OPMODE_NOSYNC_NOEOP (3 << 3) -#define ULPI_FC_RESET (1 << 5) -#define ULPI_FC_SUSPENDM (1 << 6) - -/* Interface Control */ -#define ULPI_IFACE_6_PIN_SERIAL_MODE (1 << 0) -#define ULPI_IFACE_3_PIN_SERIAL_MODE (1 << 1) -#define ULPI_IFACE_CARKITMODE (1 << 2) -#define ULPI_IFACE_CLOCKSUSPENDM (1 << 3) -#define ULPI_IFACE_AUTORESUME (1 << 4) -#define ULPI_IFACE_EXTVBUS_COMPLEMENT (1 << 5) -#define ULPI_IFACE_PASSTHRU (1 << 6) -#define ULPI_IFACE_PROTECT_IFC_DISABLE (1 << 7) - -/* ULPI OTG Control Register bits */ -#define ULPI_OTG_USE_EXT_VBUS_IND (1 << 7) /* Use ext. Vbus indicator */ -#define ULPI_OTG_DRV_VBUS_EXT (1 << 6) /* Drive Vbus external */ -#define ULPI_OTG_DRV_VBUS (1 << 5) /* Drive Vbus */ -#define ULPI_OTG_CHRG_VBUS (1 << 4) /* Charge Vbus */ -#define ULPI_OTG_DISCHRG_VBUS (1 << 3) /* Discharge Vbus */ -#define ULPI_OTG_DM_PULL_DOWN (1 << 2) /* enable DM Pull Down */ -#define ULPI_OTG_DP_PULL_DOWN (1 << 1) /* enable DP Pull Down */ -#define ULPI_OTG_ID_PULL_UP (1 << 0) /* enable ID Pull Up */ - -#endif /* __MACH_ULPI_H */ - |