diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/ubi-media.h | 369 | ||||
| -rw-r--r-- | include/usb/cdc.h | 250 | ||||
| -rw-r--r-- | include/usb/ch9.h | 799 | ||||
| -rw-r--r-- | include/usb/composite.h | 348 | ||||
| -rw-r--r-- | include/usb/dfu.h | 116 | ||||
| -rw-r--r-- | include/usb/fsl_usb2.h | 22 | ||||
| -rw-r--r-- | include/usb/gadget.h | 900 | ||||
| -rw-r--r-- | include/usb_dfu_trailer.h | 31 |
8 files changed, 2835 insertions, 0 deletions
diff --git a/include/ubi-media.h b/include/ubi-media.h new file mode 100644 index 0000000000..daead705fb --- /dev/null +++ b/include/ubi-media.h @@ -0,0 +1,369 @@ +/* + * Copyright (c) International Business Machines Corp., 2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Authors: Artem Bityutskiy (Битюцкий Артём) + * Thomas Gleixner + * Frank Haverkamp + * Oliver Lohmann + * Andreas Arnez + */ + +/* + * This file defines the layout of UBI headers and all the other UBI on-flash + * data structures. + */ + +#ifndef __UBI_MEDIA_H__ +#define __UBI_MEDIA_H__ + +#include <asm/byteorder.h> + +/* The version of UBI images supported by this implementation */ +#define UBI_VERSION 1 + +/* The highest erase counter value supported by this implementation */ +#define UBI_MAX_ERASECOUNTER 0x7FFFFFFF + +/* The initial CRC32 value used when calculating CRC checksums */ +#define UBI_CRC32_INIT 0xFFFFFFFFU + +/* Erase counter header magic number (ASCII "UBI#") */ +#define UBI_EC_HDR_MAGIC 0x55424923 +/* Volume identifier header magic number (ASCII "UBI!") */ +#define UBI_VID_HDR_MAGIC 0x55424921 + +/* + * Volume type constants used in the volume identifier header. + * + * @UBI_VID_DYNAMIC: dynamic volume + * @UBI_VID_STATIC: static volume + */ +enum { + UBI_VID_DYNAMIC = 1, + UBI_VID_STATIC = 2 +}; + +/* + * Volume flags used in the volume table record. + * + * @UBI_VTBL_AUTORESIZE_FLG: auto-resize this volume + * + * %UBI_VTBL_AUTORESIZE_FLG flag can be set only for one volume in the volume + * table. UBI automatically re-sizes the volume which has this flag and makes + * the volume to be of largest possible size. This means that if after the + * initialization UBI finds out that there are available physical eraseblocks + * present on the device, it automatically appends all of them to the volume + * (the physical eraseblocks reserved for bad eraseblocks handling and other + * reserved physical eraseblocks are not taken). So, if there is a volume with + * the %UBI_VTBL_AUTORESIZE_FLG flag set, the amount of available logical + * eraseblocks will be zero after UBI is loaded, because all of them will be + * reserved for this volume. Note, the %UBI_VTBL_AUTORESIZE_FLG bit is cleared + * after the volume had been initialized. + * + * The auto-resize feature is useful for device production purposes. For + * example, different NAND flash chips may have different amount of initial bad + * eraseblocks, depending of particular chip instance. Manufacturers of NAND + * chips usually guarantee that the amount of initial bad eraseblocks does not + * exceed certain percent, e.g. 2%. When one creates an UBI image which will be + * flashed to the end devices in production, he does not know the exact amount + * of good physical eraseblocks the NAND chip on the device will have, but this + * number is required to calculate the volume sized and put them to the volume + * table of the UBI image. In this case, one of the volumes (e.g., the one + * which will store the root file system) is marked as "auto-resizable", and + * UBI will adjust its size on the first boot if needed. + * + * Note, first UBI reserves some amount of physical eraseblocks for bad + * eraseblock handling, and then re-sizes the volume, not vice-versa. This + * means that the pool of reserved physical eraseblocks will always be present. + */ +enum { + UBI_VTBL_AUTORESIZE_FLG = 0x01, +}; + +/* + * Compatibility constants used by internal volumes. + * + * @UBI_COMPAT_DELETE: delete this internal volume before anything is written + * to the flash + * @UBI_COMPAT_RO: attach this device in read-only mode + * @UBI_COMPAT_PRESERVE: preserve this internal volume - do not touch its + * physical eraseblocks, don't allow the wear-leveling + * sub-system to move them + * @UBI_COMPAT_REJECT: reject this UBI image + */ +enum { + UBI_COMPAT_DELETE = 1, + UBI_COMPAT_RO = 2, + UBI_COMPAT_PRESERVE = 4, + UBI_COMPAT_REJECT = 5 +}; + +/* Sizes of UBI headers */ +#define UBI_EC_HDR_SIZE sizeof(struct ubi_ec_hdr) +#define UBI_VID_HDR_SIZE sizeof(struct ubi_vid_hdr) + +/* Sizes of UBI headers without the ending CRC */ +#define UBI_EC_HDR_SIZE_CRC (UBI_EC_HDR_SIZE - sizeof(__be32)) +#define UBI_VID_HDR_SIZE_CRC (UBI_VID_HDR_SIZE - sizeof(__be32)) + +/** + * struct ubi_ec_hdr - UBI erase counter header. + * @magic: erase counter header magic number (%UBI_EC_HDR_MAGIC) + * @version: version of UBI implementation which is supposed to accept this + * UBI image + * @padding1: reserved for future, zeroes + * @ec: the erase counter + * @vid_hdr_offset: where the VID header starts + * @data_offset: where the user data start + * @padding2: reserved for future, zeroes + * @hdr_crc: erase counter header CRC checksum + * + * The erase counter header takes 64 bytes and has a plenty of unused space for + * future usage. The unused fields are zeroed. The @version field is used to + * indicate the version of UBI implementation which is supposed to be able to + * work with this UBI image. If @version is greater than the current UBI + * version, the image is rejected. This may be useful in future if something + * is changed radically. This field is duplicated in the volume identifier + * header. + * + * The @vid_hdr_offset and @data_offset fields contain the offset of the the + * volume identifier header and user data, relative to the beginning of the + * physical eraseblock. These values have to be the same for all physical + * eraseblocks. + */ +struct ubi_ec_hdr { + __be32 magic; + __u8 version; + __u8 padding1[3]; + __be64 ec; /* Warning: the current limit is 31-bit anyway! */ + __be32 vid_hdr_offset; + __be32 data_offset; + __u8 padding2[36]; + __be32 hdr_crc; +} __attribute__ ((packed)); + +/** + * struct ubi_vid_hdr - on-flash UBI volume identifier header. + * @magic: volume identifier header magic number (%UBI_VID_HDR_MAGIC) + * @version: UBI implementation version which is supposed to accept this UBI + * image (%UBI_VERSION) + * @vol_type: volume type (%UBI_VID_DYNAMIC or %UBI_VID_STATIC) + * @copy_flag: if this logical eraseblock was copied from another physical + * eraseblock (for wear-leveling reasons) + * @compat: compatibility of this volume (%0, %UBI_COMPAT_DELETE, + * %UBI_COMPAT_IGNORE, %UBI_COMPAT_PRESERVE, or %UBI_COMPAT_REJECT) + * @vol_id: ID of this volume + * @lnum: logical eraseblock number + * @padding1: reserved for future, zeroes + * @data_size: how many bytes of data this logical eraseblock contains + * @used_ebs: total number of used logical eraseblocks in this volume + * @data_pad: how many bytes at the end of this physical eraseblock are not + * used + * @data_crc: CRC checksum of the data stored in this logical eraseblock + * @padding2: reserved for future, zeroes + * @sqnum: sequence number + * @padding3: reserved for future, zeroes + * @hdr_crc: volume identifier header CRC checksum + * + * The @sqnum is the value of the global sequence counter at the time when this + * VID header was created. The global sequence counter is incremented each time + * UBI writes a new VID header to the flash, i.e. when it maps a logical + * eraseblock to a new physical eraseblock. The global sequence counter is an + * unsigned 64-bit integer and we assume it never overflows. The @sqnum + * (sequence number) is used to distinguish between older and newer versions of + * logical eraseblocks. + * + * There are 2 situations when there may be more than one physical eraseblock + * corresponding to the same logical eraseblock, i.e., having the same @vol_id + * and @lnum values in the volume identifier header. Suppose we have a logical + * eraseblock L and it is mapped to the physical eraseblock P. + * + * 1. Because UBI may erase physical eraseblocks asynchronously, the following + * situation is possible: L is asynchronously erased, so P is scheduled for + * erasure, then L is written to,i.e. mapped to another physical eraseblock P1, + * so P1 is written to, then an unclean reboot happens. Result - there are 2 + * physical eraseblocks P and P1 corresponding to the same logical eraseblock + * L. But P1 has greater sequence number, so UBI picks P1 when it attaches the + * flash. + * + * 2. From time to time UBI moves logical eraseblocks to other physical + * eraseblocks for wear-leveling reasons. If, for example, UBI moves L from P + * to P1, and an unclean reboot happens before P is physically erased, there + * are two physical eraseblocks P and P1 corresponding to L and UBI has to + * select one of them when the flash is attached. The @sqnum field says which + * PEB is the original (obviously P will have lower @sqnum) and the copy. But + * it is not enough to select the physical eraseblock with the higher sequence + * number, because the unclean reboot could have happen in the middle of the + * copying process, so the data in P is corrupted. It is also not enough to + * just select the physical eraseblock with lower sequence number, because the + * data there may be old (consider a case if more data was added to P1 after + * the copying). Moreover, the unclean reboot may happen when the erasure of P + * was just started, so it result in unstable P, which is "mostly" OK, but + * still has unstable bits. + * + * UBI uses the @copy_flag field to indicate that this logical eraseblock is a + * copy. UBI also calculates data CRC when the data is moved and stores it at + * the @data_crc field of the copy (P1). So when UBI needs to pick one physical + * eraseblock of two (P or P1), the @copy_flag of the newer one (P1) is + * examined. If it is cleared, the situation* is simple and the newer one is + * picked. If it is set, the data CRC of the copy (P1) is examined. If the CRC + * checksum is correct, this physical eraseblock is selected (P1). Otherwise + * the older one (P) is selected. + * + * There are 2 sorts of volumes in UBI: user volumes and internal volumes. + * Internal volumes are not seen from outside and are used for various internal + * UBI purposes. In this implementation there is only one internal volume - the + * layout volume. Internal volumes are the main mechanism of UBI extensions. + * For example, in future one may introduce a journal internal volume. Internal + * volumes have their own reserved range of IDs. + * + * The @compat field is only used for internal volumes and contains the "degree + * of their compatibility". It is always zero for user volumes. This field + * provides a mechanism to introduce UBI extensions and to be still compatible + * with older UBI binaries. For example, if someone introduced a journal in + * future, he would probably use %UBI_COMPAT_DELETE compatibility for the + * journal volume. And in this case, older UBI binaries, which know nothing + * about the journal volume, would just delete this volume and work perfectly + * fine. This is similar to what Ext2fs does when it is fed by an Ext3fs image + * - it just ignores the Ext3fs journal. + * + * The @data_crc field contains the CRC checksum of the contents of the logical + * eraseblock if this is a static volume. In case of dynamic volumes, it does + * not contain the CRC checksum as a rule. The only exception is when the + * data of the physical eraseblock was moved by the wear-leveling sub-system, + * then the wear-leveling sub-system calculates the data CRC and stores it in + * the @data_crc field. And of course, the @copy_flag is %in this case. + * + * The @data_size field is used only for static volumes because UBI has to know + * how many bytes of data are stored in this eraseblock. For dynamic volumes, + * this field usually contains zero. The only exception is when the data of the + * physical eraseblock was moved to another physical eraseblock for + * wear-leveling reasons. In this case, UBI calculates CRC checksum of the + * contents and uses both @data_crc and @data_size fields. In this case, the + * @data_size field contains data size. + * + * The @used_ebs field is used only for static volumes and indicates how many + * eraseblocks the data of the volume takes. For dynamic volumes this field is + * not used and always contains zero. + * + * The @data_pad is calculated when volumes are created using the alignment + * parameter. So, effectively, the @data_pad field reduces the size of logical + * eraseblocks of this volume. This is very handy when one uses block-oriented + * software (say, cramfs) on top of the UBI volume. + */ +struct ubi_vid_hdr { + __be32 magic; + __u8 version; + __u8 vol_type; + __u8 copy_flag; + __u8 compat; + __be32 vol_id; + __be32 lnum; + __be32 leb_ver; + __be32 data_size; + __be32 used_ebs; + __be32 data_pad; + __be32 data_crc; + __u8 padding2[4]; + __be64 sqnum; + __u8 padding3[12]; + __be32 hdr_crc; +} __attribute__ ((packed)); + +/* Internal UBI volumes count */ +#define UBI_INT_VOL_COUNT 1 + +/* + * Starting ID of internal volumes. There is reserved room for 4096 internal + * volumes. + */ +#define UBI_INTERNAL_VOL_START (0x7FFFFFFF - 4096) + +/* The layout volume contains the volume table */ + +#define UBI_LAYOUT_VOLUME_ID UBI_INTERNAL_VOL_START +#define UBI_LAYOUT_VOLUME_TYPE UBI_VID_DYNAMIC +#define UBI_LAYOUT_VOLUME_ALIGN 1 +#define UBI_LAYOUT_VOLUME_EBS 2 +#define UBI_LAYOUT_VOLUME_NAME "layout volume" +#define UBI_LAYOUT_VOLUME_COMPAT UBI_COMPAT_REJECT + +/* The maximum number of volumes per one UBI device */ +#define UBI_MAX_VOLUMES 128 + +/* The maximum volume name length */ +#define UBI_VOL_NAME_MAX 127 + +/* Size of the volume table record */ +#define UBI_VTBL_RECORD_SIZE sizeof(struct ubi_vtbl_record) + +/* Size of the volume table record without the ending CRC */ +#define UBI_VTBL_RECORD_SIZE_CRC (UBI_VTBL_RECORD_SIZE - sizeof(__be32)) + +/** + * struct ubi_vtbl_record - a record in the volume table. + * @reserved_pebs: how many physical eraseblocks are reserved for this volume + * @alignment: volume alignment + * @data_pad: how many bytes are unused at the end of the each physical + * eraseblock to satisfy the requested alignment + * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME) + * @upd_marker: if volume update was started but not finished + * @name_len: volume name length + * @name: the volume name + * @flags: volume flags (%UBI_VTBL_AUTORESIZE_FLG) + * @padding: reserved, zeroes + * @crc: a CRC32 checksum of the record + * + * The volume table records are stored in the volume table, which is stored in + * the layout volume. The layout volume consists of 2 logical eraseblock, each + * of which contains a copy of the volume table (i.e., the volume table is + * duplicated). The volume table is an array of &struct ubi_vtbl_record + * objects indexed by the volume ID. + * + * If the size of the logical eraseblock is large enough to fit + * %UBI_MAX_VOLUMES records, the volume table contains %UBI_MAX_VOLUMES + * records. Otherwise, it contains as many records as it can fit (i.e., size of + * logical eraseblock divided by sizeof(struct ubi_vtbl_record)). + * + * The @upd_marker flag is used to implement volume update. It is set to %1 + * before update and set to %0 after the update. So if the update operation was + * interrupted, UBI knows that the volume is corrupted. + * + * The @alignment field is specified when the volume is created and cannot be + * later changed. It may be useful, for example, when a block-oriented file + * system works on top of UBI. The @data_pad field is calculated using the + * logical eraseblock size and @alignment. The alignment must be multiple to the + * minimal flash I/O unit. If @alignment is 1, all the available space of + * the physical eraseblocks is used. + * + * Empty records contain all zeroes and the CRC checksum of those zeroes. + */ +struct ubi_vtbl_record { + __be32 reserved_pebs; + __be32 alignment; + __be32 data_pad; + __u8 vol_type; + __u8 upd_marker; + __be16 name_len; + __u8 name[UBI_VOL_NAME_MAX+1]; + __u8 flags; + __u8 padding[23]; + __be32 crc; +} __attribute__ ((packed)); + +#endif /* !__UBI_MEDIA_H__ */ + diff --git a/include/usb/cdc.h b/include/usb/cdc.h new file mode 100644 index 0000000000..c24124a42c --- /dev/null +++ b/include/usb/cdc.h @@ -0,0 +1,250 @@ +/* + * USB Communications Device Class (CDC) definitions + * + * CDC says how to talk to lots of different types of network adapters, + * notably ethernet adapters and various modems. It's used mostly with + * firmware based USB peripherals. + */ + +#ifndef __LINUX_USB_CDC_H +#define __LINUX_USB_CDC_H + +#include <linux/types.h> + +#define USB_CDC_SUBCLASS_ACM 0x02 +#define USB_CDC_SUBCLASS_ETHERNET 0x06 +#define USB_CDC_SUBCLASS_WHCM 0x08 +#define USB_CDC_SUBCLASS_DMM 0x09 +#define USB_CDC_SUBCLASS_MDLM 0x0a +#define USB_CDC_SUBCLASS_OBEX 0x0b +#define USB_CDC_SUBCLASS_EEM 0x0c + +#define USB_CDC_PROTO_NONE 0 + +#define USB_CDC_ACM_PROTO_AT_V25TER 1 +#define USB_CDC_ACM_PROTO_AT_PCCA101 2 +#define USB_CDC_ACM_PROTO_AT_PCCA101_WAKE 3 +#define USB_CDC_ACM_PROTO_AT_GSM 4 +#define USB_CDC_ACM_PROTO_AT_3G 5 +#define USB_CDC_ACM_PROTO_AT_CDMA 6 +#define USB_CDC_ACM_PROTO_VENDOR 0xff + +#define USB_CDC_PROTO_EEM 7 + +/*-------------------------------------------------------------------------*/ + +/* + * Class-Specific descriptors ... there are a couple dozen of them + */ + +#define USB_CDC_HEADER_TYPE 0x00 /* header_desc */ +#define USB_CDC_CALL_MANAGEMENT_TYPE 0x01 /* call_mgmt_descriptor */ +#define USB_CDC_ACM_TYPE 0x02 /* acm_descriptor */ +#define USB_CDC_UNION_TYPE 0x06 /* union_desc */ +#define USB_CDC_COUNTRY_TYPE 0x07 +#define USB_CDC_NETWORK_TERMINAL_TYPE 0x0a /* network_terminal_desc */ +#define USB_CDC_ETHERNET_TYPE 0x0f /* ether_desc */ +#define USB_CDC_WHCM_TYPE 0x11 +#define USB_CDC_MDLM_TYPE 0x12 /* mdlm_desc */ +#define USB_CDC_MDLM_DETAIL_TYPE 0x13 /* mdlm_detail_desc */ +#define USB_CDC_DMM_TYPE 0x14 +#define USB_CDC_OBEX_TYPE 0x15 + +/* "Header Functional Descriptor" from CDC spec 5.2.3.1 */ +struct usb_cdc_header_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdCDC; +} __attribute__ ((packed)); + +/* "Call Management Descriptor" from CDC spec 5.2.3.2 */ +struct usb_cdc_call_mgmt_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 bmCapabilities; +#define USB_CDC_CALL_MGMT_CAP_CALL_MGMT 0x01 +#define USB_CDC_CALL_MGMT_CAP_DATA_INTF 0x02 + + __u8 bDataInterface; +} __attribute__ ((packed)); + +/* "Abstract Control Management Descriptor" from CDC spec 5.2.3.3 */ +struct usb_cdc_acm_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 bmCapabilities; +} __attribute__ ((packed)); + +/* capabilities from 5.2.3.3 */ + +#define USB_CDC_COMM_FEATURE 0x01 +#define USB_CDC_CAP_LINE 0x02 +#define USB_CDC_CAP_BRK 0x04 +#define USB_CDC_CAP_NOTIFY 0x08 + +/* "Union Functional Descriptor" from CDC spec 5.2.3.8 */ +struct usb_cdc_union_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 bMasterInterface0; + __u8 bSlaveInterface0; + /* ... and there could be other slave interfaces */ +} __attribute__ ((packed)); + +/* "Country Selection Functional Descriptor" from CDC spec 5.2.3.9 */ +struct usb_cdc_country_functional_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 iCountryCodeRelDate; + __le16 wCountyCode0; + /* ... and there can be a lot of country codes */ +} __attribute__ ((packed)); + +/* "Network Channel Terminal Functional Descriptor" from CDC spec 5.2.3.11 */ +struct usb_cdc_network_terminal_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 bEntityId; + __u8 iName; + __u8 bChannelIndex; + __u8 bPhysicalInterface; +} __attribute__ ((packed)); + +/* "Ethernet Networking Functional Descriptor" from CDC spec 5.2.3.16 */ +struct usb_cdc_ether_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __u8 iMACAddress; + __le32 bmEthernetStatistics; + __le16 wMaxSegmentSize; + __le16 wNumberMCFilters; + __u8 bNumberPowerFilters; +} __attribute__ ((packed)); + +/* "Telephone Control Model Functional Descriptor" from CDC WMC spec 6.3..3 */ +struct usb_cdc_dmm_desc { + __u8 bFunctionLength; + __u8 bDescriptorType; + __u8 bDescriptorSubtype; + __u16 bcdVersion; + __le16 wMaxCommand; +} __attribute__ ((packed)); + +/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */ +struct usb_cdc_mdlm_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdVersion; + __u8 bGUID[16]; +} __attribute__ ((packed)); + +/* "MDLM Detail Functional Descriptor" from CDC WMC spec 6.7.2.4 */ +struct usb_cdc_mdlm_detail_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + /* type is associated with mdlm_desc.bGUID */ + __u8 bGuidDescriptorType; + __u8 bDetailData[0]; +} __attribute__ ((packed)); + +/* "OBEX Control Model Functional Descriptor" */ +struct usb_cdc_obex_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdVersion; +} __attribute__ ((packed)); + +/*-------------------------------------------------------------------------*/ + +/* + * Class-Specific Control Requests (6.2) + * + * section 3.6.2.1 table 4 has the ACM profile, for modems. + * section 3.8.2 table 10 has the ethernet profile. + * + * Microsoft's RNDIS stack for Ethernet is a vendor-specific CDC ACM variant, + * heavily dependent on the encapsulated (proprietary) command mechanism. + */ + +#define USB_CDC_SEND_ENCAPSULATED_COMMAND 0x00 +#define USB_CDC_GET_ENCAPSULATED_RESPONSE 0x01 +#define USB_CDC_REQ_SET_LINE_CODING 0x20 +#define USB_CDC_REQ_GET_LINE_CODING 0x21 +#define USB_CDC_REQ_SET_CONTROL_LINE_STATE 0x22 +#define USB_CDC_REQ_SEND_BREAK 0x23 +#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40 +#define USB_CDC_SET_ETHERNET_PM_PATTERN_FILTER 0x41 +#define USB_CDC_GET_ETHERNET_PM_PATTERN_FILTER 0x42 +#define USB_CDC_SET_ETHERNET_PACKET_FILTER 0x43 +#define USB_CDC_GET_ETHERNET_STATISTIC 0x44 + +/* Line Coding Structure from CDC spec 6.2.13 */ +struct usb_cdc_line_coding { + __le32 dwDTERate; + __u8 bCharFormat; +#define USB_CDC_1_STOP_BITS 0 +#define USB_CDC_1_5_STOP_BITS 1 +#define USB_CDC_2_STOP_BITS 2 + + __u8 bParityType; +#define USB_CDC_NO_PARITY 0 +#define USB_CDC_ODD_PARITY 1 +#define USB_CDC_EVEN_PARITY 2 +#define USB_CDC_MARK_PARITY 3 +#define USB_CDC_SPACE_PARITY 4 + + __u8 bDataBits; +} __attribute__ ((packed)); + +/* table 62; bits in multicast filter */ +#define USB_CDC_PACKET_TYPE_PROMISCUOUS (1 << 0) +#define USB_CDC_PACKET_TYPE_ALL_MULTICAST (1 << 1) /* no filter */ +#define USB_CDC_PACKET_TYPE_DIRECTED (1 << 2) +#define USB_CDC_PACKET_TYPE_BROADCAST (1 << 3) +#define USB_CDC_PACKET_TYPE_MULTICAST (1 << 4) /* filtered */ + + +/*-------------------------------------------------------------------------*/ + +/* + * Class-Specific Notifications (6.3) sent by interrupt transfers + * + * section 3.8.2 table 11 of the CDC spec lists Ethernet notifications + * section 3.6.2.1 table 5 specifies ACM notifications, accepted by RNDIS + * RNDIS also defines its own bit-incompatible notifications + */ + +#define USB_CDC_NOTIFY_NETWORK_CONNECTION 0x00 +#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE 0x01 +#define USB_CDC_NOTIFY_SERIAL_STATE 0x20 +#define USB_CDC_NOTIFY_SPEED_CHANGE 0x2a + +struct usb_cdc_notification { + __u8 bmRequestType; + __u8 bNotificationType; + __le16 wValue; + __le16 wIndex; + __le16 wLength; +} __attribute__ ((packed)); + +#endif /* __LINUX_USB_CDC_H */ diff --git a/include/usb/ch9.h b/include/usb/ch9.h new file mode 100644 index 0000000000..93223638f7 --- /dev/null +++ b/include/usb/ch9.h @@ -0,0 +1,799 @@ +/* + * This file holds USB constants and structures that are needed for + * USB device APIs. These are used by the USB device model, which is + * defined in chapter 9 of the USB 2.0 specification and in the + * Wireless USB 1.0 (spread around). Linux has several APIs in C that + * need these: + * + * - the master/host side Linux-USB kernel driver API; + * - the "usbfs" user space API; and + * - the Linux "gadget" slave/device/peripheral side driver API. + * + * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems + * act either as a USB master/host or as a USB slave/device. That means + * the master and slave side APIs benefit from working well together. + * + * There's also "Wireless USB", using low power short range radios for + * peripheral interconnection but otherwise building on the USB framework. + * + * Note all descriptors are declared '__attribute__((packed))' so that: + * + * [a] they never get padded, either internally (USB spec writers + * probably handled that) or externally; + * + * [b] so that accessing bigger-than-a-bytes fields will never + * generate bus errors on any platform, even when the location of + * its descriptor inside a bundle isn't "naturally aligned", and + * + * [c] for consistency, removing all doubt even when it appears to + * someone that the two other points are non-issues for that + * particular descriptor type. + */ + +#ifndef __LINUX_USB_CH9_H +#define __LINUX_USB_CH9_H + +#include <linux/types.h> /* __u8 etc */ + +/*-------------------------------------------------------------------------*/ + +/* CONTROL REQUEST SUPPORT */ + +/* + * USB directions + * + * This bit flag is used in endpoint descriptors' bEndpointAddress field. + * It's also one of three fields in control requests bRequestType. + */ +#define USB_DIR_OUT 0 /* to device */ +#define USB_DIR_IN 0x80 /* to host */ + +/* + * USB types, the second of three bRequestType fields + */ +#define USB_TYPE_MASK (0x03 << 5) +#define USB_TYPE_STANDARD (0x00 << 5) +#define USB_TYPE_CLASS (0x01 << 5) +#define USB_TYPE_VENDOR (0x02 << 5) +#define USB_TYPE_RESERVED (0x03 << 5) + +/* + * USB recipients, the third of three bRequestType fields + */ +#define USB_RECIP_MASK 0x1f +#define USB_RECIP_DEVICE 0x00 +#define USB_RECIP_INTERFACE 0x01 +#define USB_RECIP_ENDPOINT 0x02 +#define USB_RECIP_OTHER 0x03 +/* From Wireless USB 1.0 */ +#define USB_RECIP_PORT 0x04 +#define USB_RECIP_RPIPE 0x05 + +/* + * Standard requests, for the bRequest field of a SETUP packet. + * + * These are qualified by the bRequestType field, so that for example + * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved + * by a GET_STATUS request. + */ +#define USB_REQ_GET_STATUS 0x00 +#define USB_REQ_CLEAR_FEATURE 0x01 +#define USB_REQ_SET_FEATURE 0x03 +#define USB_REQ_SET_ADDRESS 0x05 +#define USB_REQ_GET_DESCRIPTOR 0x06 +#define USB_REQ_SET_DESCRIPTOR 0x07 +#define USB_REQ_GET_CONFIGURATION 0x08 +#define USB_REQ_SET_CONFIGURATION 0x09 +#define USB_REQ_GET_INTERFACE 0x0A +#define USB_REQ_SET_INTERFACE 0x0B +#define USB_REQ_SYNCH_FRAME 0x0C + +#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ +#define USB_REQ_GET_ENCRYPTION 0x0E +#define USB_REQ_RPIPE_ABORT 0x0E +#define USB_REQ_SET_HANDSHAKE 0x0F +#define USB_REQ_RPIPE_RESET 0x0F +#define USB_REQ_GET_HANDSHAKE 0x10 +#define USB_REQ_SET_CONNECTION 0x11 +#define USB_REQ_SET_SECURITY_DATA 0x12 +#define USB_REQ_GET_SECURITY_DATA 0x13 +#define USB_REQ_SET_WUSB_DATA 0x14 +#define USB_REQ_LOOPBACK_DATA_WRITE 0x15 +#define USB_REQ_LOOPBACK_DATA_READ 0x16 +#define USB_REQ_SET_INTERFACE_DS 0x17 + +/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, + * used by hubs to put ports into a new L1 suspend state, except that it + * forgot to define its number ... + */ + +/* + * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and + * are read as a bit array returned by USB_REQ_GET_STATUS. (So there + * are at most sixteen features of each type.) Hubs may also support a + * new USB_REQ_TEST_AND_SET_FEATURE to put ports into L1 suspend. + */ +#define USB_DEVICE_SELF_POWERED 0 /* (read only) */ +#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */ +#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */ +#define USB_DEVICE_BATTERY 2 /* (wireless) */ +#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */ +#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/ +#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */ +#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ +#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ + +#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ + + +/** + * struct usb_ctrlrequest - SETUP data for a USB device control request + * @bRequestType: matches the USB bmRequestType field + * @bRequest: matches the USB bRequest field + * @wValue: matches the USB wValue field (le16 byte order) + * @wIndex: matches the USB wIndex field (le16 byte order) + * @wLength: matches the USB wLength field (le16 byte order) + * + * This structure is used to send control requests to a USB device. It matches + * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the + * USB spec for a fuller description of the different fields, and what they are + * used for. + * + * Note that the driver for any interface can issue control requests. + * For most devices, interfaces don't coordinate with each other, so + * such requests may be made at any time. + */ +struct usb_ctrlrequest { + __u8 bRequestType; + __u8 bRequest; + __le16 wValue; + __le16 wIndex; + __le16 wLength; +} __attribute__ ((packed)); + +/*-------------------------------------------------------------------------*/ + +/* + * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or + * (rarely) accepted by SET_DESCRIPTOR. + * + * Note that all multi-byte values here are encoded in little endian + * byte order "on the wire". Within the kernel and when exposed + * through the Linux-USB APIs, they are not converted to cpu byte + * order; it is the responsibility of the client code to do this. + * The single exception is when device and configuration descriptors (but + * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); + * in this case the fields are converted to host endianness by the kernel. + */ + +/* + * Descriptor types ... USB 2.0 spec table 9.5 + */ +#define USB_DT_DEVICE 0x01 +#define USB_DT_CONFIG 0x02 +#define USB_DT_STRING 0x03 +#define USB_DT_INTERFACE 0x04 +#define USB_DT_ENDPOINT 0x05 +#define USB_DT_DEVICE_QUALIFIER 0x06 +#define USB_DT_OTHER_SPEED_CONFIG 0x07 +#define USB_DT_INTERFACE_POWER 0x08 +/* these are from a minor usb 2.0 revision (ECN) */ +#define USB_DT_OTG 0x09 +#define USB_DT_DEBUG 0x0a +#define USB_DT_INTERFACE_ASSOCIATION 0x0b +/* these are from the Wireless USB spec */ +#define USB_DT_SECURITY 0x0c +#define USB_DT_KEY 0x0d +#define USB_DT_ENCRYPTION_TYPE 0x0e +#define USB_DT_BOS 0x0f +#define USB_DT_DEVICE_CAPABILITY 0x10 +#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11 +#define USB_DT_WIRE_ADAPTER 0x21 +#define USB_DT_RPIPE 0x22 +#define USB_DT_CS_RADIO_CONTROL 0x23 +/* From the USB 3.0 spec */ +#define USB_DT_SS_ENDPOINT_COMP 0x30 + +/* Conventional codes for class-specific descriptors. The convention is + * defined in the USB "Common Class" Spec (3.11). Individual class specs + * are authoritative for their usage, not the "common class" writeup. + */ +#define USB_DT_CS_DEVICE (USB_TYPE_CLASS | USB_DT_DEVICE) +#define USB_DT_CS_CONFIG (USB_TYPE_CLASS | USB_DT_CONFIG) +#define USB_DT_CS_STRING (USB_TYPE_CLASS | USB_DT_STRING) +#define USB_DT_CS_INTERFACE (USB_TYPE_CLASS | USB_DT_INTERFACE) +#define USB_DT_CS_ENDPOINT (USB_TYPE_CLASS | USB_DT_ENDPOINT) + +/* All standard descriptors have these 2 fields at the beginning */ +struct usb_descriptor_header { + __u8 bLength; + __u8 bDescriptorType; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE: Device descriptor */ +struct usb_device_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __le16 idVendor; + __le16 idProduct; + __le16 bcdDevice; + __u8 iManufacturer; + __u8 iProduct; + __u8 iSerialNumber; + __u8 bNumConfigurations; +} __attribute__ ((packed)); + +#define USB_DT_DEVICE_SIZE 18 + + +/* + * Device and/or Interface Class codes + * as found in bDeviceClass or bInterfaceClass + * and defined by www.usb.org documents + */ +#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ +#define USB_CLASS_AUDIO 1 +#define USB_CLASS_COMM 2 +#define USB_CLASS_HID 3 +#define USB_CLASS_PHYSICAL 5 +#define USB_CLASS_STILL_IMAGE 6 +#define USB_CLASS_PRINTER 7 +#define USB_CLASS_MASS_STORAGE 8 +#define USB_CLASS_HUB 9 +#define USB_CLASS_CDC_DATA 0x0a +#define USB_CLASS_CSCID 0x0b /* chip+ smart card */ +#define USB_CLASS_CONTENT_SEC 0x0d /* content security */ +#define USB_CLASS_VIDEO 0x0e +#define USB_CLASS_WIRELESS_CONTROLLER 0xe0 +#define USB_CLASS_MISC 0xef +#define USB_CLASS_APP_SPEC 0xfe +#define USB_CLASS_VENDOR_SPEC 0xff + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_CONFIG: Configuration descriptor information. + * + * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the + * descriptor type is different. Highspeed-capable devices can look + * different depending on what speed they're currently running. Only + * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG + * descriptors. + */ +struct usb_config_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumInterfaces; + __u8 bConfigurationValue; + __u8 iConfiguration; + __u8 bmAttributes; + __u8 bMaxPower; +} __attribute__ ((packed)); + +#define USB_DT_CONFIG_SIZE 9 + +/* from config descriptor bmAttributes */ +#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */ +#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */ +#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */ +#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_STRING: String descriptor */ +struct usb_string_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wData[1]; /* UTF-16LE encoded */ +} __attribute__ ((packed)); + +/* note that "string" zero is special, it holds language codes that + * the device supports, not Unicode characters. + */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_INTERFACE: Interface descriptor */ +struct usb_interface_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bInterfaceNumber; + __u8 bAlternateSetting; + __u8 bNumEndpoints; + __u8 bInterfaceClass; + __u8 bInterfaceSubClass; + __u8 bInterfaceProtocol; + __u8 iInterface; +} __attribute__ ((packed)); + +#define USB_DT_INTERFACE_SIZE 9 + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_ENDPOINT: Endpoint descriptor */ +struct usb_endpoint_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEndpointAddress; + __u8 bmAttributes; + __le16 wMaxPacketSize; + __u8 bInterval; + + /* NOTE: these two are _only_ in audio endpoints. */ + /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */ + __u8 bRefresh; + __u8 bSynchAddress; +} __attribute__ ((packed)); + +#define USB_DT_ENDPOINT_SIZE 7 +#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */ + + +/* + * Endpoints + */ +#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ +#define USB_ENDPOINT_DIR_MASK 0x80 + +#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ +#define USB_ENDPOINT_XFER_CONTROL 0 +#define USB_ENDPOINT_XFER_ISOC 1 +#define USB_ENDPOINT_XFER_BULK 2 +#define USB_ENDPOINT_XFER_INT 3 +#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 + +/*-------------------------------------------------------------------------*/ + +/** + * usb_endpoint_num - get the endpoint's number + * @epd: endpoint to be checked + * + * Returns @epd's number: 0 to 15. + */ +static inline int usb_endpoint_num(const struct usb_endpoint_descriptor *epd) +{ + return epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; +} + +/** + * usb_endpoint_type - get the endpoint's transfer type + * @epd: endpoint to be checked + * + * Returns one of USB_ENDPOINT_XFER_{CONTROL, ISOC, BULK, INT} according + * to @epd's transfer type. + */ +static inline int usb_endpoint_type(const struct usb_endpoint_descriptor *epd) +{ + return epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; +} + +/** + * usb_endpoint_dir_in - check if the endpoint has IN direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type IN, otherwise it returns false. + */ +static inline int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN); +} + +/** + * usb_endpoint_dir_out - check if the endpoint has OUT direction + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type OUT, otherwise it returns false. + */ +static inline int usb_endpoint_dir_out( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); +} + +/** + * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type bulk, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_bulk( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK); +} + +/** + * usb_endpoint_xfer_control - check if the endpoint has control transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type control, otherwise it returns false. + */ +static inline int usb_endpoint_xfer_control( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_CONTROL); +} + +/** + * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type interrupt, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_int( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_INT); +} + +/** + * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type + * @epd: endpoint to be checked + * + * Returns true if the endpoint is of type isochronous, otherwise it returns + * false. + */ +static inline int usb_endpoint_xfer_isoc( + const struct usb_endpoint_descriptor *epd) +{ + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_ISOC); +} + +/** + * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_in( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has bulk transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_bulk_out( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd)); +} + +/** + * usb_endpoint_is_int_in - check if the endpoint is interrupt IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_in( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has interrupt transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_int_out( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd)); +} + +/** + * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and IN direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_in( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd)); +} + +/** + * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT + * @epd: endpoint to be checked + * + * Returns true if the endpoint has isochronous transfer type and OUT direction, + * otherwise it returns false. + */ +static inline int usb_endpoint_is_isoc_out( + const struct usb_endpoint_descriptor *epd) +{ + return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd)); +} + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ +struct usb_ss_ep_comp_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bMaxBurst; + __u8 bmAttributes; + __u16 wBytesPerInterval; +} __attribute__ ((packed)); + +#define USB_DT_SS_EP_COMP_SIZE 6 + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ +struct usb_qualifier_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 bcdUSB; + __u8 bDeviceClass; + __u8 bDeviceSubClass; + __u8 bDeviceProtocol; + __u8 bMaxPacketSize0; + __u8 bNumConfigurations; + __u8 bRESERVED; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_OTG (from OTG 1.0a supplement) */ +struct usb_otg_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bmAttributes; /* support for HNP, SRP, etc */ +} __attribute__ ((packed)); + +/* from usb_otg_descriptor.bmAttributes */ +#define USB_OTG_SRP (1 << 0) +#define USB_OTG_HNP (1 << 1) /* swap host/device roles */ + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ +struct usb_debug_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + /* bulk endpoints with 8 byte maxpacket */ + __u8 bDebugInEndpoint; + __u8 bDebugOutEndpoint; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */ +struct usb_interface_assoc_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bFirstInterface; + __u8 bInterfaceCount; + __u8 bFunctionClass; + __u8 bFunctionSubClass; + __u8 bFunctionProtocol; + __u8 iFunction; +} __attribute__ ((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_SECURITY: group of wireless security descriptors, including + * encryption types available for setting up a CC/association. + */ +struct usb_security_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumEncryptionTypes; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys + * may be retrieved. + */ +struct usb_key_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 tTKID[3]; + __u8 bReserved; + __u8 bKeyData[0]; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */ +struct usb_encryption_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bEncryptionType; +#define USB_ENC_TYPE_UNSECURE 0 +#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */ +#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */ +#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */ + __u8 bEncryptionValue; /* use in SET_ENCRYPTION */ + __u8 bAuthKeyIndex; +} __attribute__((packed)); + + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_BOS: group of device-level capabilities */ +struct usb_bos_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __le16 wTotalLength; + __u8 bNumDeviceCaps; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ +struct usb_dev_cap_header { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; +} __attribute__((packed)); + +#define USB_CAP_TYPE_WIRELESS_USB 1 + +struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + + __u8 bmAttributes; +#define USB_WIRELESS_P2P_DRD (1 << 1) +#define USB_WIRELESS_BEACON_MASK (3 << 2) +#define USB_WIRELESS_BEACON_SELF (1 << 2) +#define USB_WIRELESS_BEACON_DIRECTED (2 << 2) +#define USB_WIRELESS_BEACON_NONE (3 << 2) + __le16 wPHYRates; /* bit rates, Mbps */ +#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */ +#define USB_WIRELESS_PHY_80 (1 << 1) +#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */ +#define USB_WIRELESS_PHY_160 (1 << 3) +#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */ +#define USB_WIRELESS_PHY_320 (1 << 5) +#define USB_WIRELESS_PHY_400 (1 << 6) +#define USB_WIRELESS_PHY_480 (1 << 7) + __u8 bmTFITXPowerInfo; /* TFI power levels */ + __u8 bmFFITXPowerInfo; /* FFI power levels */ + __le16 bmBandGroup; + __u8 bReserved; +} __attribute__((packed)); + +#define USB_CAP_TYPE_EXT 2 + +struct usb_ext_cap_descriptor { /* Link Power Management */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bmAttributes; +#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with + * each endpoint descriptor for a wireless device + */ +struct usb_wireless_ep_comp_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bMaxBurst; + __u8 bMaxSequence; + __le16 wMaxStreamDelay; + __le16 wOverTheAirPacketSize; + __u8 bOverTheAirInterval; + __u8 bmCompAttributes; +#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */ +#define USB_ENDPOINT_SWITCH_NO 0 +#define USB_ENDPOINT_SWITCH_SWITCH 1 +#define USB_ENDPOINT_SWITCH_SCALE 2 +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless + * host and a device for connection set up, mutual authentication, and + * exchanging short lived session keys. The handshake depends on a CC. + */ +struct usb_handshake { + __u8 bMessageNumber; + __u8 bStatus; + __u8 tTKID[3]; + __u8 bReserved; + __u8 CDID[16]; + __u8 nonce[16]; + __u8 MIC[8]; +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC). + * A CC may also be set up using non-wireless secure channels (including + * wired USB!), and some devices may support CCs with multiple hosts. + */ +struct usb_connection_context { + __u8 CHID[16]; /* persistent host id */ + __u8 CDID[16]; /* device id (unique w/in host context) */ + __u8 CK[16]; /* connection key */ +} __attribute__((packed)); + +/*-------------------------------------------------------------------------*/ + +/* USB 2.0 defines three speeds, here's how Linux identifies them */ + +enum usb_device_speed { + USB_SPEED_UNKNOWN = 0, /* enumerating */ + USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */ + USB_SPEED_HIGH, /* usb 2.0 */ + USB_SPEED_VARIABLE, /* wireless (usb 2.5) */ + USB_SPEED_SUPER, /* usb 3.0 */ +}; + +enum usb_device_state { + /* NOTATTACHED isn't in the USB spec, and this state acts + * the same as ATTACHED ... but it's clearer this way. + */ + USB_STATE_NOTATTACHED = 0, + + /* chapter 9 and authentication (wireless) device states */ + USB_STATE_ATTACHED, + USB_STATE_POWERED, /* wired */ + USB_STATE_RECONNECTING, /* auth */ + USB_STATE_UNAUTHENTICATED, /* auth */ + USB_STATE_DEFAULT, /* limited function */ + USB_STATE_ADDRESS, + USB_STATE_CONFIGURED, /* most functions */ + + USB_STATE_SUSPENDED + + /* NOTE: there are actually four different SUSPENDED + * states, returning to POWERED, DEFAULT, ADDRESS, or + * CONFIGURED respectively when SOF tokens flow again. + * At this level there's no difference between L1 and L2 + * suspend states. (L2 being original USB 1.1 suspend.) + */ +}; + +#endif /* __LINUX_USB_CH9_H */ diff --git a/include/usb/composite.h b/include/usb/composite.h new file mode 100644 index 0000000000..5f7a75dbe6 --- /dev/null +++ b/include/usb/composite.h @@ -0,0 +1,348 @@ +/* + * composite.h -- framework for usb gadgets which are composite devices + * + * Copyright (C) 2006-2008 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __LINUX_USB_COMPOSITE_H +#define __LINUX_USB_COMPOSITE_H + +/* + * This framework is an optional layer on top of the USB Gadget interface, + * making it easier to build (a) Composite devices, supporting multiple + * functions within any single configuration, and (b) Multi-configuration + * devices, also supporting multiple functions but without necessarily + * having more than one function per configuration. + * + * Example: a device with a single configuration supporting both network + * link and mass storage functions is a composite device. Those functions + * might alternatively be packaged in individual configurations, but in + * the composite model the host can use both functions at the same time. + */ + +#include <usb/ch9.h> +#include <usb/gadget.h> + + +struct usb_configuration; + +/** + * struct usb_function - describes one function of a configuration + * @name: For diagnostics, identifies the function. + * @strings: tables of strings, keyed by identifiers assigned during bind() + * and by language IDs provided in control requests + * @descriptors: Table of full (or low) speed descriptors, using interface and + * string identifiers assigned during @bind(). If this pointer is null, + * the function will not be available at full speed (or at low speed). + * @hs_descriptors: Table of high speed descriptors, using interface and + * string identifiers assigned during @bind(). If this pointer is null, + * the function will not be available at high speed. + * @config: assigned when @usb_add_function() is called; this is the + * configuration with which this function is associated. + * @bind: Before the gadget can register, all of its functions bind() to the + * available resources including string and interface identifiers used + * in interface or class descriptors; endpoints; I/O buffers; and so on. + * @unbind: Reverses @bind; called as a side effect of unregistering the + * driver which added this function. + * @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may + * initialize usb_ep.driver data at this time (when it is used). + * Note that setting an interface to its current altsetting resets + * interface state, and that all interfaces have a disabled state. + * @get_alt: Returns the active altsetting. If this is not provided, + * then only altsetting zero is supported. + * @disable: (REQUIRED) Indicates the function should be disabled. Reasons + * include host resetting or reconfiguring the gadget, and disconnection. + * @setup: Used for interface-specific control requests. + * @suspend: Notifies functions when the host stops sending USB traffic. + * @resume: Notifies functions when the host restarts USB traffic. + * + * A single USB function uses one or more interfaces, and should in most + * cases support operation at both full and high speeds. Each function is + * associated by @usb_add_function() with a one configuration; that function + * causes @bind() to be called so resources can be allocated as part of + * setting up a gadget driver. Those resources include endpoints, which + * should be allocated using @usb_ep_autoconfig(). + * + * To support dual speed operation, a function driver provides descriptors + * for both high and full speed operation. Except in rare cases that don't + * involve bulk endpoints, each speed needs different endpoint descriptors. + * + * Function drivers choose their own strategies for managing instance data. + * The simplest strategy just declares it "static', which means the function + * can only be activated once. If the function needs to be exposed in more + * than one configuration at a given speed, it needs to support multiple + * usb_function structures (one for each configuration). + * + * A more complex strategy might encapsulate a @usb_function structure inside + * a driver-specific instance structure to allows multiple activations. An + * example of multiple activations might be a CDC ACM function that supports + * two or more distinct instances within the same configuration, providing + * several independent logical data links to a USB host. + */ +struct usb_function { + const char *name; + struct usb_gadget_strings **strings; + struct usb_descriptor_header **descriptors; + struct usb_descriptor_header **hs_descriptors; + + struct usb_configuration *config; + + /* REVISIT: bind() functions can be marked __init, which + * makes trouble for section mismatch analysis. See if + * we can't restructure things to avoid mismatching. + * Related: unbind() may kfree() but bind() won't... + */ + + /* configuration management: bind/unbind */ + int (*bind)(struct usb_configuration *, + struct usb_function *); + void (*unbind)(struct usb_configuration *, + struct usb_function *); + + /* runtime state management */ + int (*set_alt)(struct usb_function *, + unsigned interface, unsigned alt); + int (*get_alt)(struct usb_function *, + unsigned interface); + void (*disable)(struct usb_function *); + int (*setup)(struct usb_function *, + const struct usb_ctrlrequest *); + void (*suspend)(struct usb_function *); + void (*resume)(struct usb_function *); + + /* private: */ + /* internals */ + struct list_head list; +}; + +int usb_add_function(struct usb_configuration *, struct usb_function *); + +int usb_function_deactivate(struct usb_function *); +int usb_function_activate(struct usb_function *); + +int usb_interface_id(struct usb_configuration *, struct usb_function *); + +/** + * ep_choose - select descriptor endpoint at current device speed + * @g: gadget, connected and running at some speed + * @hs: descriptor to use for high speed operation + * @fs: descriptor to use for full or low speed operation + */ +static inline struct usb_endpoint_descriptor * +ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs, + struct usb_endpoint_descriptor *fs) +{ + if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) + return hs; + return fs; +} + +#define MAX_CONFIG_INTERFACES 16 /* arbitrary; max 255 */ + +/** + * struct usb_configuration - represents one gadget configuration + * @label: For diagnostics, describes the configuration. + * @strings: Tables of strings, keyed by identifiers assigned during @bind() + * and by language IDs provided in control requests. + * @descriptors: Table of descriptors preceding all function descriptors. + * Examples include OTG and vendor-specific descriptors. + * @bind: Called from @usb_add_config() to allocate resources unique to this + * configuration and to call @usb_add_function() for each function used. + * @unbind: Reverses @bind; called as a side effect of unregistering the + * driver which added this configuration. + * @setup: Used to delegate control requests that aren't handled by standard + * device infrastructure or directed at a specific interface. + * @bConfigurationValue: Copied into configuration descriptor. + * @iConfiguration: Copied into configuration descriptor. + * @bmAttributes: Copied into configuration descriptor. + * @bMaxPower: Copied into configuration descriptor. + * @cdev: assigned by @usb_add_config() before calling @bind(); this is + * the device associated with this configuration. + * + * Configurations are building blocks for gadget drivers structured around + * function drivers. Simple USB gadgets require only one function and one + * configuration, and handle dual-speed hardware by always providing the same + * functionality. Slightly more complex gadgets may have more than one + * single-function configuration at a given speed; or have configurations + * that only work at one speed. + * + * Composite devices are, by definition, ones with configurations which + * include more than one function. + * + * The lifecycle of a usb_configuration includes allocation, initialization + * of the fields described above, and calling @usb_add_config() to set up + * internal data and bind it to a specific device. The configuration's + * @bind() method is then used to initialize all the functions and then + * call @usb_add_function() for them. + * + * Those functions would normally be independant of each other, but that's + * not mandatory. CDC WMC devices are an example where functions often + * depend on other functions, with some functions subsidiary to others. + * Such interdependency may be managed in any way, so long as all of the + * descriptors complete by the time the composite driver returns from + * its bind() routine. + */ +struct usb_configuration { + const char *label; + struct usb_gadget_strings **strings; + const struct usb_descriptor_header **descriptors; + + /* REVISIT: bind() functions can be marked __init, which + * makes trouble for section mismatch analysis. See if + * we can't restructure things to avoid mismatching... + */ + + /* configuration management: bind/unbind */ + int (*bind)(struct usb_configuration *); + void (*unbind)(struct usb_configuration *); + int (*setup)(struct usb_configuration *, + const struct usb_ctrlrequest *); + + /* fields in the config descriptor */ + u8 bConfigurationValue; + u8 iConfiguration; + u8 bmAttributes; + u8 bMaxPower; + + struct usb_composite_dev *cdev; + + /* private: */ + /* internals */ + struct list_head list; + struct list_head functions; + u8 next_interface_id; + unsigned highspeed:1; + unsigned fullspeed:1; + struct usb_function *interface[MAX_CONFIG_INTERFACES]; +}; + +int usb_add_config(struct usb_composite_dev *, + struct usb_configuration *); + +/** + * struct usb_composite_driver - groups configurations into a gadget + * @name: For diagnostics, identifies the driver. + * @dev: Template descriptor for the device, including default device + * identifiers. + * @strings: tables of strings, keyed by identifiers assigned during bind() + * and language IDs provided in control requests + * @bind: (REQUIRED) Used to allocate resources that are shared across the + * whole device, such as string IDs, and add its configurations using + * @usb_add_config(). This may fail by returning a negative errno + * value; it should return zero on successful initialization. + * @unbind: Reverses @bind(); called as a side effect of unregistering + * this driver. + * @suspend: Notifies when the host stops sending USB traffic, + * after function notifications + * @resume: Notifies configuration when the host restarts USB traffic, + * before function notifications + * + * Devices default to reporting self powered operation. Devices which rely + * on bus powered operation should report this in their @bind() method. + * + * Before returning from @bind, various fields in the template descriptor + * may be overridden. These include the idVendor/idProduct/bcdDevice values + * normally to bind the appropriate host side driver, and the three strings + * (iManufacturer, iProduct, iSerialNumber) normally used to provide user + * meaningful device identifiers. (The strings will not be defined unless + * they are defined in @dev and @strings.) The correct ep0 maxpacket size + * is also reported, as defined by the underlying controller driver. + */ +struct usb_composite_driver { + const char *name; + const struct usb_device_descriptor *dev; + struct usb_gadget_strings **strings; + + /* REVISIT: bind() functions can be marked __init, which + * makes trouble for section mismatch analysis. See if + * we can't restructure things to avoid mismatching... + */ + + int (*bind)(struct usb_composite_dev *); + int (*unbind)(struct usb_composite_dev *); + + /* global suspend hooks */ + void (*suspend)(struct usb_composite_dev *); + void (*resume)(struct usb_composite_dev *); +}; + +extern int usb_composite_register(struct usb_composite_driver *); +extern void usb_composite_unregister(struct usb_composite_driver *); + + +/** + * struct usb_composite_device - represents one composite usb gadget + * @gadget: read-only, abstracts the gadget's usb peripheral controller + * @req: used for control responses; buffer is pre-allocated + * @bufsiz: size of buffer pre-allocated in @req + * @config: the currently active configuration + * + * One of these devices is allocated and initialized before the + * associated device driver's bind() is called. + * + * OPEN ISSUE: it appears that some WUSB devices will need to be + * built by combining a normal (wired) gadget with a wireless one. + * This revision of the gadget framework should probably try to make + * sure doing that won't hurt too much. + * + * One notion for how to handle Wireless USB devices involves: + * (a) a second gadget here, discovery mechanism TBD, but likely + * needing separate "register/unregister WUSB gadget" calls; + * (b) updates to usb_gadget to include flags "is it wireless", + * "is it wired", plus (presumably in a wrapper structure) + * bandgroup and PHY info; + * (c) presumably a wireless_ep wrapping a usb_ep, and reporting + * wireless-specific parameters like maxburst and maxsequence; + * (d) configurations that are specific to wireless links; + * (e) function drivers that understand wireless configs and will + * support wireless for (additional) function instances; + * (f) a function to support association setup (like CBAF), not + * necessarily requiring a wireless adapter; + * (g) composite device setup that can create one or more wireless + * configs, including appropriate association setup support; + * (h) more, TBD. + */ +struct usb_composite_dev { + struct usb_gadget *gadget; + struct usb_request *req; + unsigned bufsiz; + + struct usb_configuration *config; + + /* private: */ + /* internals */ + struct usb_device_descriptor desc; + struct list_head configs; + struct usb_composite_driver *driver; + u8 next_string_id; + + /* the gadget driver won't enable the data pullup + * while the deactivation count is nonzero. + */ + unsigned deactivations; +}; + +extern int usb_string_id(struct usb_composite_dev *c); + +/* messaging utils */ +#define DBG(d, fmt, args...) +#define VDBG(d, fmt, args...) +#define ERROR(d, fmt, args...) +#define WARNING(d, fmt, args...) +#define INFO(d, fmt, args...) + +#endif /* __LINUX_USB_COMPOSITE_H */ diff --git a/include/usb/dfu.h b/include/usb/dfu.h new file mode 100644 index 0000000000..a1777241a0 --- /dev/null +++ b/include/usb/dfu.h @@ -0,0 +1,116 @@ +#ifndef _USB_DFU_H +#define _USB_DFU_H +/* USB Device Firmware Update Implementation for OpenPCD + * (C) 2006 by Harald Welte <hwelte@hmw-consulting.de> + * + * Protocol definitions for USB DFU + * + * This ought to be compliant to the USB DFU Spec 1.0 as available from + * http://www.usb.org/developers/devclass_docs/usbdfu10.pdf + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/types.h> + +#define DFU_FLAG_SAVE (1 << 0) +#define DFU_FLAG_READBACK (1 << 1) + +struct usb_dfu_dev { + char *name; + char *dev; + unsigned long flags; +}; + +struct usb_dfu_pdata { + char *manufacturer; + char *productname; + u16 idVendor; + u16 idProduct; + + struct usb_dfu_dev *alts; + int num_alts; +}; + +int usb_dfu_register(struct usb_dfu_pdata *); + +#define USB_DT_DFU 0x21 + +struct usb_dfu_func_descriptor { + u_int8_t bLength; + u_int8_t bDescriptorType; + u_int8_t bmAttributes; +#define USB_DFU_CAN_DOWNLOAD (1 << 0) +#define USB_DFU_CAN_UPLOAD (1 << 1) +#define USB_DFU_MANIFEST_TOL (1 << 2) +#define USB_DFU_WILL_DETACH (1 << 3) + u_int16_t wDetachTimeOut; + u_int16_t wTransferSize; + u_int16_t bcdDFUVersion; +} __attribute__ ((packed)); + +#define USB_DT_DFU_SIZE 9 + +#define USB_TYPE_DFU (USB_TYPE_CLASS|USB_RECIP_INTERFACE) + +/* DFU class-specific requests (Section 3, DFU Rev 1.1) */ +#define USB_REQ_DFU_DETACH 0x00 +#define USB_REQ_DFU_DNLOAD 0x01 +#define USB_REQ_DFU_UPLOAD 0x02 +#define USB_REQ_DFU_GETSTATUS 0x03 +#define USB_REQ_DFU_CLRSTATUS 0x04 +#define USB_REQ_DFU_GETSTATE 0x05 +#define USB_REQ_DFU_ABORT 0x06 + +struct dfu_status { + u_int8_t bStatus; + u_int8_t bwPollTimeout[3]; + u_int8_t bState; + u_int8_t iString; +} __attribute__((packed)); + +#define DFU_STATUS_OK 0x00 +#define DFU_STATUS_errTARGET 0x01 +#define DFU_STATUS_errFILE 0x02 +#define DFU_STATUS_errWRITE 0x03 +#define DFU_STATUS_errERASE 0x04 +#define DFU_STATUS_errCHECK_ERASED 0x05 +#define DFU_STATUS_errPROG 0x06 +#define DFU_STATUS_errVERIFY 0x07 +#define DFU_STATUS_errADDRESS 0x08 +#define DFU_STATUS_errNOTDONE 0x09 +#define DFU_STATUS_errFIRMWARE 0x0a +#define DFU_STATUS_errVENDOR 0x0b +#define DFU_STATUS_errUSBR 0x0c +#define DFU_STATUS_errPOR 0x0d +#define DFU_STATUS_errUNKNOWN 0x0e +#define DFU_STATUS_errSTALLEDPKT 0x0f + +enum dfu_state { + DFU_STATE_appIDLE = 0, + DFU_STATE_appDETACH = 1, + DFU_STATE_dfuIDLE = 2, + DFU_STATE_dfuDNLOAD_SYNC = 3, + DFU_STATE_dfuDNBUSY = 4, + DFU_STATE_dfuDNLOAD_IDLE = 5, + DFU_STATE_dfuMANIFEST_SYNC = 6, + DFU_STATE_dfuMANIFEST = 7, + DFU_STATE_dfuMANIFEST_WAIT_RST = 8, + DFU_STATE_dfuUPLOAD_IDLE = 9, + DFU_STATE_dfuERROR = 10, +}; + +#endif /* _USB_DFU_H */ + diff --git a/include/usb/fsl_usb2.h b/include/usb/fsl_usb2.h new file mode 100644 index 0000000000..fd37adebc8 --- /dev/null +++ b/include/usb/fsl_usb2.h @@ -0,0 +1,22 @@ +enum fsl_usb2_operating_modes { + FSL_USB2_MPH_HOST, + FSL_USB2_DR_HOST, + FSL_USB2_DR_DEVICE, + FSL_USB2_DR_OTG, +}; + +enum fsl_usb2_phy_modes { + FSL_USB2_PHY_NONE, + FSL_USB2_PHY_ULPI, + FSL_USB2_PHY_UTMI, + FSL_USB2_PHY_UTMI_WIDE, + FSL_USB2_PHY_SERIAL, +}; + +struct fsl_usb2_platform_data { + /* board specific information */ + enum fsl_usb2_operating_modes operating_mode; + enum fsl_usb2_phy_modes phy_mode; + unsigned int port_enables; +}; + diff --git a/include/usb/gadget.h b/include/usb/gadget.h new file mode 100644 index 0000000000..67f3ee4d8b --- /dev/null +++ b/include/usb/gadget.h @@ -0,0 +1,900 @@ +/* + * <linux/usb/gadget.h> + * + * We call the USB code inside a Linux-based peripheral device a "gadget" + * driver, except for the hardware-specific bus glue. One USB host can + * master many USB gadgets, but the gadgets are only slaved to one host. + * + * + * (C) Copyright 2002-2004 by David Brownell + * All Rights Reserved. + * + * This software is licensed under the GNU GPL version 2. + */ + +#ifndef __LINUX_USB_GADGET_H +#define __LINUX_USB_GADGET_H + +#include <usb/ch9.h> +#include <malloc.h> +#include <errno.h> +#include <list.h> + +struct usb_ep; + +/** + * struct usb_request - describes one i/o request + * @buf: Buffer used for data. Always provide this; some controllers + * only use PIO, or don't use DMA for some endpoints. + * @dma: DMA address corresponding to 'buf'. If you don't set this + * field, and the usb controller needs one, it is responsible + * for mapping and unmapping the buffer. + * @length: Length of that data + * @no_interrupt: If true, hints that no completion irq is needed. + * Helpful sometimes with deep request queues that are handled + * directly by DMA controllers. + * @zero: If true, when writing data, makes the last packet be "short" + * by adding a zero length packet as needed; + * @short_not_ok: When reading data, makes short packets be + * treated as errors (queue stops advancing till cleanup). + * @complete: Function called when request completes, so this request and + * its buffer may be re-used. The function will always be called with + * interrupts disabled, and it must not sleep. + * Reads terminate with a short packet, or when the buffer fills, + * whichever comes first. When writes terminate, some data bytes + * will usually still be in flight (often in a hardware fifo). + * Errors (for reads or writes) stop the queue from advancing + * until the completion function returns, so that any transfers + * invalidated by the error may first be dequeued. + * @context: For use by the completion callback + * @list: For use by the gadget driver. + * @status: Reports completion code, zero or a negative errno. + * Normally, faults block the transfer queue from advancing until + * the completion callback returns. + * Code "-ESHUTDOWN" indicates completion caused by device disconnect, + * or when the driver disabled the endpoint. + * @actual: Reports bytes transferred to/from the buffer. For reads (OUT + * transfers) this may be less than the requested length. If the + * short_not_ok flag is set, short reads are treated as errors + * even when status otherwise indicates successful completion. + * Note that for writes (IN transfers) some data bytes may still + * reside in a device-side FIFO when the request is reported as + * complete. + * + * These are allocated/freed through the endpoint they're used with. The + * hardware's driver can add extra per-request data to the memory it returns, + * which often avoids separate memory allocations (potential failures), + * later when the request is queued. + * + * Request flags affect request handling, such as whether a zero length + * packet is written (the "zero" flag), whether a short read should be + * treated as an error (blocking request queue advance, the "short_not_ok" + * flag), or hinting that an interrupt is not required (the "no_interrupt" + * flag, for use with deep request queues). + * + * Bulk endpoints can use any size buffers, and can also be used for interrupt + * transfers. interrupt-only endpoints can be much less functional. + * + * NOTE: this is analagous to 'struct urb' on the host side, except that + * it's thinner and promotes more pre-allocation. + */ + +struct usb_request { + void *buf; + unsigned length; + dma_addr_t dma; + + unsigned no_interrupt:1; + unsigned zero:1; + unsigned short_not_ok:1; + + void (*complete)(struct usb_ep *ep, + struct usb_request *req); + void *context; + struct list_head list; + + int status; + unsigned actual; +}; + +/*-------------------------------------------------------------------------*/ + +/* endpoint-specific parts of the api to the usb controller hardware. + * unlike the urb model, (de)multiplexing layers are not required. + * (so this api could slash overhead if used on the host side...) + * + * note that device side usb controllers commonly differ in how many + * endpoints they support, as well as their capabilities. + */ +struct usb_ep_ops { + int (*enable) (struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc); + int (*disable) (struct usb_ep *ep); + + struct usb_request *(*alloc_request) (struct usb_ep *ep); + void (*free_request) (struct usb_ep *ep, struct usb_request *req); + + int (*queue) (struct usb_ep *ep, struct usb_request *req); + int (*dequeue) (struct usb_ep *ep, struct usb_request *req); + + int (*set_halt) (struct usb_ep *ep, int value); + int (*set_wedge) (struct usb_ep *ep); + + int (*fifo_status) (struct usb_ep *ep); + void (*fifo_flush) (struct usb_ep *ep); +}; + +/** + * struct usb_ep - device side representation of USB endpoint + * @name:identifier for the endpoint, such as "ep-a" or "ep9in-bulk" + * @ops: Function pointers used to access hardware-specific operations. + * @ep_list:the gadget's ep_list holds all of its endpoints + * @maxpacket:The maximum packet size used on this endpoint. The initial + * value can sometimes be reduced (hardware allowing), according to + * the endpoint descriptor used to configure the endpoint. + * @driver_data:for use by the gadget driver. all other fields are + * read-only to gadget drivers. + * + * the bus controller driver lists all the general purpose endpoints in + * gadget->ep_list. the control endpoint (gadget->ep0) is not in that list, + * and is accessed only in response to a driver setup() callback. + */ +struct usb_ep { + void *driver_data; + + const char *name; + const struct usb_ep_ops *ops; + struct list_head ep_list; + unsigned maxpacket:16; +}; + +/*-------------------------------------------------------------------------*/ + +/** + * usb_ep_enable - configure endpoint, making it usable + * @ep:the endpoint being configured. may not be the endpoint named "ep0". + * drivers discover endpoints through the ep_list of a usb_gadget. + * @desc:descriptor for desired behavior. caller guarantees this pointer + * remains valid until the endpoint is disabled; the data byte order + * is little-endian (usb-standard). + * + * when configurations are set, or when interface settings change, the driver + * will enable or disable the relevant endpoints. while it is enabled, an + * endpoint may be used for i/o until the driver receives a disconnect() from + * the host or until the endpoint is disabled. + * + * the ep0 implementation (which calls this routine) must ensure that the + * hardware capabilities of each endpoint match the descriptor provided + * for it. for example, an endpoint named "ep2in-bulk" would be usable + * for interrupt transfers as well as bulk, but it likely couldn't be used + * for iso transfers or for endpoint 14. some endpoints are fully + * configurable, with more generic names like "ep-a". (remember that for + * USB, "in" means "towards the USB master".) + * + * returns zero, or a negative error code. + */ +static inline int usb_ep_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + return ep->ops->enable(ep, desc); +} + +/** + * usb_ep_disable - endpoint is no longer usable + * @ep:the endpoint being unconfigured. may not be the endpoint named "ep0". + * + * no other task may be using this endpoint when this is called. + * any pending and uncompleted requests will complete with status + * indicating disconnect (-ESHUTDOWN) before this call returns. + * gadget drivers must call usb_ep_enable() again before queueing + * requests to the endpoint. + * + * returns zero, or a negative error code. + */ +static inline int usb_ep_disable(struct usb_ep *ep) +{ + return ep->ops->disable(ep); +} + +/** + * usb_ep_alloc_request - allocate a request object to use with this endpoint + * @ep:the endpoint to be used with with the request + * + * Request objects must be allocated with this call, since they normally + * need controller-specific setup and may even need endpoint-specific + * resources such as allocation of DMA descriptors. + * Requests may be submitted with usb_ep_queue(), and receive a single + * completion callback. Free requests with usb_ep_free_request(), when + * they are no longer needed. + * + * Returns the request, or null if one could not be allocated. + */ +static inline struct usb_request *usb_ep_alloc_request(struct usb_ep *ep) +{ + return ep->ops->alloc_request(ep); +} + +/** + * usb_ep_free_request - frees a request object + * @ep:the endpoint associated with the request + * @req:the request being freed + * + * Reverses the effect of usb_ep_alloc_request(). + * Caller guarantees the request is not queued, and that it will + * no longer be requeued (or otherwise used). + */ +static inline void usb_ep_free_request(struct usb_ep *ep, + struct usb_request *req) +{ + ep->ops->free_request(ep, req); +} + +/** + * usb_ep_queue - queues (submits) an I/O request to an endpoint. + * @ep:the endpoint associated with the request + * @req:the request being submitted + * + * This tells the device controller to perform the specified request through + * that endpoint (reading or writing a buffer). When the request completes, + * including being canceled by usb_ep_dequeue(), the request's completion + * routine is called to return the request to the driver. Any endpoint + * (except control endpoints like ep0) may have more than one transfer + * request queued; they complete in FIFO order. Once a gadget driver + * submits a request, that request may not be examined or modified until it + * is given back to that driver through the completion callback. + * + * Each request is turned into one or more packets. The controller driver + * never merges adjacent requests into the same packet. OUT transfers + * will sometimes use data that's already buffered in the hardware. + * Drivers can rely on the fact that the first byte of the request's buffer + * always corresponds to the first byte of some USB packet, for both + * IN and OUT transfers. + * + * Bulk endpoints can queue any amount of data; the transfer is packetized + * automatically. The last packet will be short if the request doesn't fill it + * out completely. Zero length packets (ZLPs) should be avoided in portable + * protocols since not all usb hardware can successfully handle zero length + * packets. (ZLPs may be explicitly written, and may be implicitly written if + * the request 'zero' flag is set.) Bulk endpoints may also be used + * for interrupt transfers; but the reverse is not true, and some endpoints + * won't support every interrupt transfer. (Such as 768 byte packets.) + * + * Interrupt-only endpoints are less functional than bulk endpoints, for + * example by not supporting queueing or not handling buffers that are + * larger than the endpoint's maxpacket size. They may also treat data + * toggle differently. + * + * Control endpoints ... after getting a setup() callback, the driver queues + * one response (even if it would be zero length). That enables the + * status ack, after transfering data as specified in the response. Setup + * functions may return negative error codes to generate protocol stalls. + * (Note that some USB device controllers disallow protocol stall responses + * in some cases.) When control responses are deferred (the response is + * written after the setup callback returns), then usb_ep_set_halt() may be + * used on ep0 to trigger protocol stalls. Depending on the controller, + * it may not be possible to trigger a status-stage protocol stall when the + * data stage is over, that is, from within the response's completion + * routine. + * + * For periodic endpoints, like interrupt or isochronous ones, the usb host + * arranges to poll once per interval, and the gadget driver usually will + * have queued some data to transfer at that time. + * + * Returns zero, or a negative error code. Endpoints that are not enabled + * report errors; errors will also be + * reported when the usb peripheral is disconnected. + */ +static inline int usb_ep_queue(struct usb_ep *ep, + struct usb_request *req) +{ + return ep->ops->queue(ep, req); +} + +/** + * usb_ep_dequeue - dequeues (cancels, unlinks) an I/O request from an endpoint + * @ep:the endpoint associated with the request + * @req:the request being canceled + * + * if the request is still active on the endpoint, it is dequeued and its + * completion routine is called (with status -ECONNRESET); else a negative + * error code is returned. + * + * note that some hardware can't clear out write fifos (to unlink the request + * at the head of the queue) except as part of disconnecting from usb. such + * restrictions prevent drivers from supporting configuration changes, + * even to configuration zero (a "chapter 9" requirement). + */ +static inline int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req) +{ + return ep->ops->dequeue(ep, req); +} + +/** + * usb_ep_set_halt - sets the endpoint halt feature. + * @ep: the non-isochronous endpoint being stalled + * + * Use this to stall an endpoint, perhaps as an error report. + * Except for control endpoints, + * the endpoint stays halted (will not stream any data) until the host + * clears this feature; drivers may need to empty the endpoint's request + * queue first, to make sure no inappropriate transfers happen. + * + * Note that while an endpoint CLEAR_FEATURE will be invisible to the + * gadget driver, a SET_INTERFACE will not be. To reset endpoints for the + * current altsetting, see usb_ep_clear_halt(). When switching altsettings, + * it's simplest to use usb_ep_enable() or usb_ep_disable() for the endpoints. + * + * Returns zero, or a negative error code. On success, this call sets + * underlying hardware state that blocks data transfers. + * Attempts to halt IN endpoints will fail (returning -EAGAIN) if any + * transfer requests are still queued, or if the controller hardware + * (usually a FIFO) still holds bytes that the host hasn't collected. + */ +static inline int usb_ep_set_halt(struct usb_ep *ep) +{ + return ep->ops->set_halt(ep, 1); +} + +/** + * usb_ep_clear_halt - clears endpoint halt, and resets toggle + * @ep:the bulk or interrupt endpoint being reset + * + * Use this when responding to the standard usb "set interface" request, + * for endpoints that aren't reconfigured, after clearing any other state + * in the endpoint's i/o queue. + * + * Returns zero, or a negative error code. On success, this call clears + * the underlying hardware state reflecting endpoint halt and data toggle. + * Note that some hardware can't support this request (like pxa2xx_udc), + * and accordingly can't correctly implement interface altsettings. + */ +static inline int usb_ep_clear_halt(struct usb_ep *ep) +{ + return ep->ops->set_halt(ep, 0); +} + +/** + * usb_ep_set_wedge - sets the halt feature and ignores clear requests + * @ep: the endpoint being wedged + * + * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT) + * requests. If the gadget driver clears the halt status, it will + * automatically unwedge the endpoint. + * + * Returns zero on success, else negative errno. + */ +static inline int +usb_ep_set_wedge(struct usb_ep *ep) +{ + if (ep->ops->set_wedge) + return ep->ops->set_wedge(ep); + else + return ep->ops->set_halt(ep, 1); +} + +/** + * usb_ep_fifo_status - returns number of bytes in fifo, or error + * @ep: the endpoint whose fifo status is being checked. + * + * FIFO endpoints may have "unclaimed data" in them in certain cases, + * such as after aborted transfers. Hosts may not have collected all + * the IN data written by the gadget driver (and reported by a request + * completion). The gadget driver may not have collected all the data + * written OUT to it by the host. Drivers that need precise handling for + * fault reporting or recovery may need to use this call. + * + * This returns the number of such bytes in the fifo, or a negative + * errno if the endpoint doesn't use a FIFO or doesn't support such + * precise handling. + */ +static inline int usb_ep_fifo_status(struct usb_ep *ep) +{ + if (ep->ops->fifo_status) + return ep->ops->fifo_status(ep); + else + return -EOPNOTSUPP; +} + +/** + * usb_ep_fifo_flush - flushes contents of a fifo + * @ep: the endpoint whose fifo is being flushed. + * + * This call may be used to flush the "unclaimed data" that may exist in + * an endpoint fifo after abnormal transaction terminations. The call + * must never be used except when endpoint is not being used for any + * protocol translation. + */ +static inline void usb_ep_fifo_flush(struct usb_ep *ep) +{ + if (ep->ops->fifo_flush) + ep->ops->fifo_flush(ep); +} + + +/*-------------------------------------------------------------------------*/ + +struct usb_gadget; + +/* the rest of the api to the controller hardware: device operations, + * which don't involve endpoints (or i/o). + */ +struct usb_gadget_ops { + int (*get_frame)(struct usb_gadget *); + int (*wakeup)(struct usb_gadget *); + int (*set_selfpowered) (struct usb_gadget *, int is_selfpowered); + int (*vbus_session) (struct usb_gadget *, int is_active); + int (*vbus_draw) (struct usb_gadget *, unsigned mA); + int (*pullup) (struct usb_gadget *, int is_on); + int (*ioctl)(struct usb_gadget *, + unsigned code, unsigned long param); +}; + +/** + * struct usb_gadget - represents a usb slave device + * @ops: Function pointers used to access hardware-specific operations. + * @ep0: Endpoint zero, used when reading or writing responses to + * driver setup() requests + * @ep_list: List of other endpoints supported by the device. + * @speed: Speed of current connection to USB host. + * @is_dualspeed: True if the controller supports both high and full speed + * operation. If it does, the gadget driver must also support both. + * @is_otg: True if the USB device port uses a Mini-AB jack, so that the + * gadget driver must provide a USB OTG descriptor. + * @is_a_peripheral: False unless is_otg, the "A" end of a USB cable + * is in the Mini-AB jack, and HNP has been used to switch roles + * so that the "A" device currently acts as A-Peripheral, not A-Host. + * @a_hnp_support: OTG device feature flag, indicating that the A-Host + * supports HNP at this port. + * @a_alt_hnp_support: OTG device feature flag, indicating that the A-Host + * only supports HNP on a different root port. + * @b_hnp_enable: OTG device feature flag, indicating that the A-Host + * enabled HNP support. + * @name: Identifies the controller hardware type. Used in diagnostics + * and sometimes configuration. + * @dev: Driver model state for this abstract device. + * + * Gadgets have a mostly-portable "gadget driver" implementing device + * functions, handling all usb configurations and interfaces. Gadget + * drivers talk to hardware-specific code indirectly, through ops vectors. + * That insulates the gadget driver from hardware details, and packages + * the hardware endpoints through generic i/o queues. The "usb_gadget" + * and "usb_ep" interfaces provide that insulation from the hardware. + * + * Except for the driver data, all fields in this structure are + * read-only to the gadget driver. That driver data is part of the + * "driver model" infrastructure in 2.6 (and later) kernels, and for + * earlier systems is grouped in a similar structure that's not known + * to the rest of the kernel. + * + * Values of the three OTG device feature flags are updated before the + * setup() call corresponding to USB_REQ_SET_CONFIGURATION, and before + * driver suspend() calls. They are valid only when is_otg, and when the + * device is acting as a B-Peripheral (so is_a_peripheral is false). + */ +struct usb_gadget { + /* readonly to gadget driver */ + const struct usb_gadget_ops *ops; + struct usb_ep *ep0; + struct list_head ep_list; /* of usb_ep */ + enum usb_device_speed speed; + unsigned is_dualspeed:1; + unsigned is_otg:1; + unsigned is_a_peripheral:1; + unsigned b_hnp_enable:1; + unsigned a_hnp_support:1; + unsigned a_alt_hnp_support:1; + const char *name; + void *priv; +}; + +static inline void set_gadget_data(struct usb_gadget *gadget, void *data) +{ + gadget->priv = data; +} + +static inline void *get_gadget_data(struct usb_gadget *gadget) +{ + return gadget->priv; +} + +/* iterates the non-control endpoints; 'tmp' is a struct usb_ep pointer */ +#define gadget_for_each_ep(tmp,gadget) \ + list_for_each_entry(tmp, &(gadget)->ep_list, ep_list) + + +/** + * gadget_is_dualspeed - return true iff the hardware handles high speed + * @g: controller that might support both high and full speeds + */ +static inline int gadget_is_dualspeed(struct usb_gadget *g) +{ +#ifdef CONFIG_USB_GADGET_DUALSPEED + /* runtime test would check "g->is_dualspeed" ... that might be + * useful to work around hardware bugs, but is mostly pointless + */ + return 1; +#else + return 0; +#endif +} + +/** + * gadget_is_otg - return true iff the hardware is OTG-ready + * @g: controller that might have a Mini-AB connector + * + * This is a runtime test, since kernels with a USB-OTG stack sometimes + * run on boards which only have a Mini-B (or Mini-A) connector. + */ +static inline int gadget_is_otg(struct usb_gadget *g) +{ +#ifdef CONFIG_USB_OTG + return g->is_otg; +#else + return 0; +#endif +} + +/** + * usb_gadget_frame_number - returns the current frame number + * @gadget: controller that reports the frame number + * + * Returns the usb frame number, normally eleven bits from a SOF packet, + * or negative errno if this device doesn't support this capability. + */ +static inline int usb_gadget_frame_number(struct usb_gadget *gadget) +{ + return gadget->ops->get_frame(gadget); +} + +/** + * usb_gadget_wakeup - tries to wake up the host connected to this gadget + * @gadget: controller used to wake up the host + * + * Returns zero on success, else negative error code if the hardware + * doesn't support such attempts, or its support has not been enabled + * by the usb host. Drivers must return device descriptors that report + * their ability to support this, or hosts won't enable it. + * + * This may also try to use SRP to wake the host and start enumeration, + * even if OTG isn't otherwise in use. OTG devices may also start + * remote wakeup even when hosts don't explicitly enable it. + */ +static inline int usb_gadget_wakeup(struct usb_gadget *gadget) +{ + if (!gadget->ops->wakeup) + return -EOPNOTSUPP; + return gadget->ops->wakeup(gadget); +} + +/** + * usb_gadget_set_selfpowered - sets the device selfpowered feature. + * @gadget:the device being declared as self-powered + * + * this affects the device status reported by the hardware driver + * to reflect that it now has a local power supply. + * + * returns zero on success, else negative errno. + */ +static inline int usb_gadget_set_selfpowered(struct usb_gadget *gadget) +{ + if (!gadget->ops->set_selfpowered) + return -EOPNOTSUPP; + return gadget->ops->set_selfpowered(gadget, 1); +} + +/** + * usb_gadget_clear_selfpowered - clear the device selfpowered feature. + * @gadget:the device being declared as bus-powered + * + * this affects the device status reported by the hardware driver. + * some hardware may not support bus-powered operation, in which + * case this feature's value can never change. + * + * returns zero on success, else negative errno. + */ +static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget) +{ + if (!gadget->ops->set_selfpowered) + return -EOPNOTSUPP; + return gadget->ops->set_selfpowered(gadget, 0); +} + +/** + * usb_gadget_vbus_connect - Notify controller that VBUS is powered + * @gadget:The device which now has VBUS power. + * Context: can sleep + * + * This call is used by a driver for an external transceiver (or GPIO) + * that detects a VBUS power session starting. Common responses include + * resuming the controller, activating the D+ (or D-) pullup to let the + * host detect that a USB device is attached, and starting to draw power + * (8mA or possibly more, especially after SET_CONFIGURATION). + * + * Returns zero on success, else negative errno. + */ +static inline int usb_gadget_vbus_connect(struct usb_gadget *gadget) +{ + if (!gadget->ops->vbus_session) + return -EOPNOTSUPP; + return gadget->ops->vbus_session(gadget, 1); +} + +/** + * usb_gadget_vbus_draw - constrain controller's VBUS power usage + * @gadget:The device whose VBUS usage is being described + * @mA:How much current to draw, in milliAmperes. This should be twice + * the value listed in the configuration descriptor bMaxPower field. + * + * This call is used by gadget drivers during SET_CONFIGURATION calls, + * reporting how much power the device may consume. For example, this + * could affect how quickly batteries are recharged. + * + * Returns zero on success, else negative errno. + */ +static inline int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA) +{ + if (!gadget->ops->vbus_draw) + return -EOPNOTSUPP; + return gadget->ops->vbus_draw(gadget, mA); +} + +/** + * usb_gadget_vbus_disconnect - notify controller about VBUS session end + * @gadget:the device whose VBUS supply is being described + * Context: can sleep + * + * This call is used by a driver for an external transceiver (or GPIO) + * that detects a VBUS power session ending. Common responses include + * reversing everything done in usb_gadget_vbus_connect(). + * + * Returns zero on success, else negative errno. + */ +static inline int usb_gadget_vbus_disconnect(struct usb_gadget *gadget) +{ + if (!gadget->ops->vbus_session) + return -EOPNOTSUPP; + return gadget->ops->vbus_session(gadget, 0); +} + +/** + * usb_gadget_connect - software-controlled connect to USB host + * @gadget:the peripheral being connected + * + * Enables the D+ (or potentially D-) pullup. The host will start + * enumerating this gadget when the pullup is active and a VBUS session + * is active (the link is powered). This pullup is always enabled unless + * usb_gadget_disconnect() has been used to disable it. + * + * Returns zero on success, else negative errno. + */ +static inline int usb_gadget_connect(struct usb_gadget *gadget) +{ + if (!gadget->ops->pullup) + return -EOPNOTSUPP; + return gadget->ops->pullup(gadget, 1); +} + +/** + * usb_gadget_disconnect - software-controlled disconnect from USB host + * @gadget:the peripheral being disconnected + * + * Disables the D+ (or potentially D-) pullup, which the host may see + * as a disconnect (when a VBUS session is active). Not all systems + * support software pullup controls. + * + * This routine may be used during the gadget driver bind() call to prevent + * the peripheral from ever being visible to the USB host, unless later + * usb_gadget_connect() is called. For example, user mode components may + * need to be activated before the system can talk to hosts. + * + * Returns zero on success, else negative errno. + */ +static inline int usb_gadget_disconnect(struct usb_gadget *gadget) +{ + if (!gadget->ops->pullup) + return -EOPNOTSUPP; + return gadget->ops->pullup(gadget, 0); +} + +int usb_gadget_poll(void); + +/*-------------------------------------------------------------------------*/ + +/** + * struct usb_gadget_driver - driver for usb 'slave' devices + * @function: String describing the gadget's function + * @speed: Highest speed the driver handles. + * @bind: Invoked when the driver is bound to a gadget, usually + * after registering the driver. + * At that point, ep0 is fully initialized, and ep_list holds + * the currently-available endpoints. + * Called in a context that permits sleeping. + * @setup: Invoked for ep0 control requests that aren't handled by + * the hardware level driver. Most calls must be handled by + * the gadget driver, including descriptor and configuration + * management. The 16 bit members of the setup data are in + * USB byte order. Called in_interrupt; this may not sleep. Driver + * queues a response to ep0, or returns negative to stall. + * @disconnect: Invoked after all transfers have been stopped, + * when the host is disconnected. May be called in_interrupt; this + * may not sleep. Some devices can't detect disconnect, so this might + * not be called except as part of controller shutdown. + * @unbind: Invoked when the driver is unbound from a gadget, + * usually from rmmod (after a disconnect is reported). + * Called in a context that permits sleeping. + * @suspend: Invoked on USB suspend. May be called in_interrupt. + * @resume: Invoked on USB resume. May be called in_interrupt. + * @driver: Driver model state for this driver. + * + * Devices are disabled till a gadget driver successfully bind()s, which + * means the driver will handle setup() requests needed to enumerate (and + * meet "chapter 9" requirements) then do some useful work. + * + * If gadget->is_otg is true, the gadget driver must provide an OTG + * descriptor during enumeration, or else fail the bind() call. In such + * cases, no USB traffic may flow until both bind() returns without + * having called usb_gadget_disconnect(), and the USB host stack has + * initialized. + * + * Drivers use hardware-specific knowledge to configure the usb hardware. + * endpoint addressing is only one of several hardware characteristics that + * are in descriptors the ep0 implementation returns from setup() calls. + * + * Except for ep0 implementation, most driver code shouldn't need change to + * run on top of different usb controllers. It'll use endpoints set up by + * that ep0 implementation. + * + * The usb controller driver handles a few standard usb requests. Those + * include set_address, and feature flags for devices, interfaces, and + * endpoints (the get_status, set_feature, and clear_feature requests). + * + * Accordingly, the driver's setup() callback must always implement all + * get_descriptor requests, returning at least a device descriptor and + * a configuration descriptor. Drivers must make sure the endpoint + * descriptors match any hardware constraints. Some hardware also constrains + * other descriptors. (The pxa250 allows only configurations 1, 2, or 3). + * + * The driver's setup() callback must also implement set_configuration, + * and should also implement set_interface, get_configuration, and + * get_interface. Setting a configuration (or interface) is where + * endpoints should be activated or (config 0) shut down. + * + * (Note that only the default control endpoint is supported. Neither + * hosts nor devices generally support control traffic except to ep0.) + * + * Most devices will ignore USB suspend/resume operations, and so will + * not provide those callbacks. However, some may need to change modes + * when the host is not longer directing those activities. For example, + * local controls (buttons, dials, etc) may need to be re-enabled since + * the (remote) host can't do that any longer; or an error state might + * be cleared, to make the device behave identically whether or not + * power is maintained. + */ +struct usb_gadget_driver { + char *function; + enum usb_device_speed speed; + int (*bind)(struct usb_gadget *); + void (*unbind)(struct usb_gadget *); + int (*setup)(struct usb_gadget *, + const struct usb_ctrlrequest *); + void (*disconnect)(struct usb_gadget *); + void (*suspend)(struct usb_gadget *); + void (*resume)(struct usb_gadget *); + + /* FIXME support safe rmmod */ +// struct device_driver driver; +}; + + + +/*-------------------------------------------------------------------------*/ + +/* driver modules register and unregister, as usual. + * these calls must be made in a context that can sleep. + * + * these will usually be implemented directly by the hardware-dependent + * usb bus interface driver, which will only support a single driver. + */ + +/** + * usb_gadget_register_driver - register a gadget driver + * @driver:the driver being registered + * Context: can sleep + * + * Call this in your gadget driver's module initialization function, + * to tell the underlying usb controller driver about your driver. + * The driver's bind() function will be called to bind it to a + * gadget before this registration call returns. It's expected that + * the bind() functions will be in init sections. + */ +int usb_gadget_register_driver(struct usb_gadget_driver *driver); + +/** + * usb_gadget_unregister_driver - unregister a gadget driver + * @driver:the driver being unregistered + * Context: can sleep + * + * Call this in your gadget driver's module cleanup function, + * to tell the underlying usb controller that your driver is + * going away. If the controller is connected to a USB host, + * it will first disconnect(). The driver is also requested + * to unbind() and clean up any device state, before this procedure + * finally returns. It's expected that the unbind() functions + * will in in exit sections, so may not be linked in some kernels. + */ +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver); + +/*-------------------------------------------------------------------------*/ + +/* utility to simplify dealing with string descriptors */ + +/** + * struct usb_string - wraps a C string and its USB id + * @id:the (nonzero) ID for this string + * @s:the string, in UTF-8 encoding + * + * If you're using usb_gadget_get_string(), use this to wrap a string + * together with its ID. + */ +struct usb_string { + u8 id; + const char *s; +}; + +/** + * struct usb_gadget_strings - a set of USB strings in a given language + * @language:identifies the strings' language (0x0409 for en-us) + * @strings:array of strings with their ids + * + * If you're using usb_gadget_get_string(), use this to wrap all the + * strings for a given language. + */ +struct usb_gadget_strings { + u16 language; /* 0x0409 for en-us */ + struct usb_string *strings; +}; + +/* put descriptor for string with that id into buf (buflen >= 256) */ +int usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf); + +/*-------------------------------------------------------------------------*/ + +/* utility to simplify managing config descriptors */ + +/* write vector of descriptors into buffer */ +int usb_descriptor_fillbuf(void *, unsigned, + const struct usb_descriptor_header **); + +/* build config descriptor from single descriptor vector */ +int usb_gadget_config_buf(const struct usb_config_descriptor *config, + void *buf, unsigned buflen, const struct usb_descriptor_header **desc); + +/* copy a NULL-terminated vector of descriptors */ +struct usb_descriptor_header **usb_copy_descriptors( + struct usb_descriptor_header **); + +/* return copy of endpoint descriptor given original descriptor set */ +struct usb_endpoint_descriptor *usb_find_endpoint( + struct usb_descriptor_header **src, + struct usb_descriptor_header **copy, + struct usb_endpoint_descriptor *match); + +/** + * usb_free_descriptors - free descriptors returned by usb_copy_descriptors() + * @v: vector of descriptors + */ +static inline void usb_free_descriptors(struct usb_descriptor_header **v) +{ + free(v); +} + +/*-------------------------------------------------------------------------*/ + +/* utility wrapping a simple endpoint selection policy */ + +extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *, + struct usb_endpoint_descriptor *); + +extern void usb_ep_autoconfig_reset(struct usb_gadget *); + +#endif /* __LINUX_USB_GADGET_H */ diff --git a/include/usb_dfu_trailer.h b/include/usb_dfu_trailer.h new file mode 100644 index 0000000000..3903b85b39 --- /dev/null +++ b/include/usb_dfu_trailer.h @@ -0,0 +1,31 @@ +#ifndef _USB_DFU_TRAILER_H +#define _USB_DFU_TRAILER_H + +/* trailer handling for DFU files */ + +#define UBOOT_DFU_TRAILER_V1 1 +#define UBOOT_DFU_TRAILER_MAGIC 0x19731978 +struct uboot_dfu_trailer { + u_int32_t magic; + u_int16_t version; + u_int16_t length; + u_int16_t vendor; + u_int16_t product; + u_int32_t revision; +} __attribute__((packed)); + +/* we mirror the trailer because we want it to be longer in later versions + * while keeping backwards compatibility */ +static inline void dfu_trailer_mirror(struct uboot_dfu_trailer *trailer, + unsigned char *eof) +{ + int i; + int len = sizeof(struct uboot_dfu_trailer); + unsigned char *src = eof - len; + unsigned char *dst = (unsigned char *) trailer; + + for (i = 0; i < len; i++) + dst[len-1-i] = src[i]; +} + +#endif /* _USB_DFU_TRAILER_H */ |