summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Release v2014.11.0v2014.11.0Sascha Hauer2014-11-051-1/+1
| | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* mxs: iomux-imx28: Fix keeper/pullup/drive strength/voltage flagsUwe Kleine-König2014-10-271-26/+26
| | | | | | | | | | | | | Double check all pin's BK, PE, SE and VE flags and correct wrong definitions using i.MX28 Applications Processor Reference Manual, Rev 2, 08/2013. Fixes: b1df39c28c7f (mxs: Add remaining i.MX28 iomux configurations) Fixes: e2cee7cb6790 (mxs: add support for mx28-evk) Fixes: 03e61e1bd967 (STM378x: Add i.MX28 architecture) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* saveenv: Fix saving to specified fileSascha Hauer2014-10-231-6/+6
| | | | | | | | Since e805b7d saveenv: provide a zeroed/empty/ignore environment barebox no longer honors the file argument when the directory argument is also givin. Fix this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* lib: parameter: fixed doku renamed ip -> ipaddrRolf Evers-Fischer2014-10-231-2/+2
| | | | | | | Long time ago all ".ip" parameters have been replaced with ".ipaddr". Signed-off-by: Rolf Evers-Fischer <embedded24@evers-fischer.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* EFI: report correct block device sizeMichael Olbrich2014-10-231-1/+1
| | | | | | | | last_block is a zero-based block number, so the total number of blocks is last_block + 1 Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* include/environment.h: Add missing includeSascha Hauer2014-10-221-0/+1
| | | | | | include/environment.h uses error codes, so it needs errno.h. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* clk: gate: remove superfluous codeLucas Stach2014-10-211-10/+1
| | | | | | | This code didn't have any effect. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* i2c: at91: fix invalid length checkLucas Stach2014-10-211-2/+2
| | | | | | Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* sha2: fix invalid length checkLucas Stach2014-10-211-1/+1
| | | | | | | length is unsigned an thus can never be <0. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* arm: at91: remove unused variableLucas Stach2014-10-211-4/+0
| | | | | | Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* dfu: fix possible usage of uninitialized varLucas Stach2014-10-211-0/+1
| | | | | | | | The error path would in fact use the status variable without it being initialized first. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* imx: ipu-v3: fix typo leading to build warningLucas Stach2014-10-211-1/+1
| | | | | | | This PAGE_SIZE clearly should not be there. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* usb: ehci-hcd: Correct CLEAR_FEATURE codeDmitry Voytik2014-10-211-4/+6
| | | | | | | | | | | | | | | This commit broke USB on olinuxino board: 87b9bea USB: host: hub: Use usb_hub_power_on from U-Boot This patch was ported from U-Boot with small changes. See discussion: http://lists.denx.de/pipermail/u-boot/2013-May/153920.html The root cause seems to be a missing mask and missing 'break' in ehci-hcd.c. Fix both. Signed-off-by: Dmitry Voytik <voytikd@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* commands: firmwareload: add CMD_GROUPSteffen Trumtrar2014-10-101-0/+1
| | | | | | | | To be able to build the documentation the CMD_GROUP macro needs to be defined. Without this the firmwareload command breaks "make docs". Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* arch/MPC5xxx: fix linker script for MPC5200Juergen Borleis2014-10-091-11/+15
| | | | | | | | | | | | | | | | | | | Without this change the barebox.bin ends up with: 00000000 79 ba 8f 79 00 00 00 00 75 39 6e d1 74 27 00 00 |y..y....u9n.t'..| 00000010 01 00 00 00 00 00 00 00 28 80 ad db 8d c7 a8 67 |........(......g| 00000020 4e 07 00 00 10 00 00 00 2f 63 6f 6e 66 69 67 00 |N......./config.| 00000030 8d c7 a8 68 ff 01 00 00 23 21 2f 62 69 6e 2f 73 |...h....#!/bin/s| 00000040 68 0a 0a 68 6f 73 74 6e 61 6d 65 3d 46 49 58 4d |h..hostname=FIXM| 00000050 45 0a 69 66 20 5b 20 2d 7a 20 22 24 75 73 65 72 |E.if [ -z "$user| 00000060 22 20 5d 3b 20 74 68 65 6e 0a 23 09 75 73 65 72 |" ]; then.#.user| 00000070 3d 0a 66 69 0a 0a 23 20 45 6e 74 65 72 20 4d 41 |=.fi..# Enter MA| [...] which means it starts with the default environment instead of the reset vector area. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* input: Let input support depend on !CONSOLE_NONESascha Hauer2014-10-081-0/+1
| | | | | | | Without console support the input devices make no sense, so add a depends on !CONSOLE_NONE. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* console: Fix CONSOLE_NONE supportSascha Hauer2014-10-081-0/+12
| | | | | | | | Without console support we need a static inline version of pr_print and dev_printf, otherwise we get link errors. Reported-by: Kevin Du Huanpeng <u74147@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* commands: select FILE_LIST for usbgadgetRobert Schwebel2014-10-061-0/+1
| | | | | | | | | | Otherwhise we get this error message: commands/built-in.o: In function `do_usbgadget': barebox-2014.10.0/commands/usbgadget.c:77: undefined reference to `file_list_parse' Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/ubi'Sascha Hauer2014-10-025-42/+40
|\
| * UBI: bugfix in ubi_wl_flush()Richard Weinberger2014-09-111-2/+2
| | | | | | | | | | | | | | | | Use the _safe variant because we're iterating over a list where items get deleted and freed. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * UBI: init_volumes: Ignore volumes with no LEBsRichard Weinberger2014-09-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UBI assumes that ubi_attach_info will only contain ubi_ainf_volume structures for volumes with at least one LEB. In scanning mode this is true because UBI can nicely create a ubi_ainf_volume on demand while creating the EBA table. For fastmap this is not true, the fastmap on-flash structure has a list of all volumes, the ubi_ainf_volume structures are created from this list. So it can happen that an empty volume ends up in init_volumes(). We can easely deal with that by looking into ->leb_count too. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * UBI: fastmap: do not miss bit-flipsBrian Norris2014-09-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The return value from 'ubi_io_read_ec_hdr()' was stored in 'err', not in 'ret'. This fix makes sure Fastmap-enabled UBI does not miss bit-flip while reading EC headers, events and scrubs the affected PEBs. This issue was reported by Coverity Scan. Artem: improved the commit message. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * UBI: fix the volumes tree sorting criteriaHeiko Schocher2014-09-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Commig "604b592 UBI: fix rb_tree node comparison in add_map" broke fastmap backward compatibility and older fastmap images cannot be mounted anymore. The reason is that it changes the volumes RB-tree sorting criteria. This patch fixes the problem. Artem: re-write the commit message Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * UBI: fix rb_tree node comparison in add_mapMike Snitzer2014-09-111-2/+2
| | | | | | | | | | | | | | | | | | The comparisons used in add_vol() shouldn't be identical. Pretty sure the following is correct but it is completely untested. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * UBI: fix ubi free PEBs count calculationTanya Brokhman2014-09-111-0/+3
| | | | | | | | | | | | | | | | | | | | The ubi->free_count should be updated with every insert/remove to/from the ubi->free list. Signed-off-by: Tanya Brokhman <tlinder@codeaurora.org> Reviewed-by: Dolev Raviv <draviv@codeaurora.org> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * UBI: fix error path in __wl_get_pebTanya Brokhman2014-09-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | In case of an error (if there are not free PEB's for example), __wl_get_peb will return a negative value. In order to prevent access violation we need to test the returned value prior to using it later on. Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org> Reviewed-by: Dolev Raviv <draviv@codeaurora.org> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * UBI: fix some use after free bugsDan Carpenter2014-09-111-4/+4
| | | | | | | | | | | | | | Move the kmem_cache_free() calls down a couple lines. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * UBI: avoid program operation on NOR flash after erasure interruptedQi Wang 王起 (qiwang)2014-09-111-32/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | nor_erase_prepare() will be called before erase a NOR flash, it will program '0' into a block to mark this block. But program data into a erasure interrupted block can cause program timtout(several minutes at most) error, could impact other operation on NOR flash. So UBIFS can read this block first to avoid unneeded program operation. This patch try to put read operation at head of write operation in nor_erase_prepare(), read out the data. If the data is already corrupt, then no need to program any data into this block, just go to erase this block. This patch is validated on Micron NOR flash, part number is：JS28F512M29EWHA Signed-off-by: Qi Wang <qiwang@micron.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
| * UBI: fix error return codeJulia Lawall2014-09-111-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Richard Weinberger <richard@nod.at>
* | Merge branch 'for-next/resource-err-ptr'Sascha Hauer2014-10-02119-164/+402
|\ \
| * | resource: Let request_ioport_region return an error pointerSascha Hauer2014-09-162-3/+3
| | | | | | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | resource: Let dev_request_mem_region return an error pointerSascha Hauer2014-09-16105-94/+292
| | | | | | | | | | | | | | | | | | For all users fix or add the error check. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | resource: Let dev_request_mem_region_by_name return an error pointerSascha Hauer2014-09-163-3/+11
| | | | | | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | resource: Let dev_get_mem_region return an error pointerSascha Hauer2014-09-167-9/+29
| | | | | | | | | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
| * | resource: Let dev_get_resource return an error pointerSascha Hauer2014-09-165-12/+14
| | | | | | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | resource: Let request_iomem_region return an error pointerSascha Hauer2014-09-168-19/+16
| | | | | | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | resource: Let __request_region return an error pointerSascha Hauer2014-09-162-6/+20
| | | | | | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | resource: Let dev_get_mem_region_by_name return an error pointerSascha Hauer2014-09-161-1/+1
| | | | | | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | resource: Let dev_get_resource_by_name return an error pointerSascha Hauer2014-09-162-6/+8
| | | | | | | | | | | | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | ata: platform_ide: cleanup resource requestingSascha Hauer2014-09-121-25/+22
| | | | | | | | | | | | | | | | | | | | | - use dev_request_mem_region to simplify code - check return values and bail out Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | | Merge branch 'for-next/phycore-imx6'Sascha Hauer2014-10-0231-262/+342
|\ \ \
| * | | ARM:phyFLEX-iMX6 New Ram Timings for Q/DLMaik Otto2014-09-177-130/+146
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Maik Otto <m.otto@phytec.de> Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | ARM:phyFLEX-iMX6: Remove mmd_write_reg from boardChristian Hemp2014-09-171-9/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove mmd_write_reg function from board file and use phy_write_mmd_indirect. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | ARM:phyFLEX-iMX6: Remove eth phy reset form boardChristian Hemp2014-09-171-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove ethernet phy reset from board file. The reset is now made by the fec driver since commit: |commit 5c1846b625247f4b99eb429dcd5b0854699a4298 |Author: Rostislav Lisovy <lisovy@gmail.com> |Date: Wed Nov 20 22:22:25 2013 +0100 | | ARM: i.mx53: Parse Reset GPIO pin in FEC driver from Devicetree | | Signed-off-by: Rostislav Lisovy <lisovy@gmail.com> | Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | phy/micrel: disable Asym_Pause supportJan Weitzel2014-09-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With SUPPORTED_Asym_Pause enabled we need to hotplug the ethernet cable. So disable it like done with PHY_ID_KSZ9021. Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | ARM:phyFLEX-iMX6: Add bootsource detectionChristian Hemp2014-09-151-0/+15
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | dts:imx6:pfla02: Add env node for SPI-NOR and NANDChristian Hemp2014-09-154-19/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add environment node for NAND and SPI-NOR Move the environment property to the module file. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | dts:imx6:pfla02:Move spi partitions imx6qdl-phytec-pfla02Christian Hemp2014-09-153-30/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the spi partition definition to imx6qdl-phytec-pfla02.dtsi Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | dts:imx6:pfla02: move mac read to moduleChristian Hemp2014-09-152-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Move mac read to module. Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * | | dts:imx6:pfla02: Remove memory nodeChristian Hemp2014-09-153-12/+0
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-19 23:02:32 +0000