summaryrefslogtreecommitdiffstats
path: root/arch/arm/boards/at91sam9260ek/init.c
Commit message (Collapse)AuthorAgeFilesLines
* defaultenv: add defaultenv-1 in boards via defaultenv_append_directory()Sascha Hauer2016-10-101-0/+4
| | | | | | | | | | | | | | | | | | | | Currently it's hardcoded for each board which defaultenv version is used. This is unfortunate since some people like the other defaultenv version better and may want to select it. This patch removes the board specific environment path CONFIG_DEFAULT_ENVIRONMENT_PATH and instead adds it via: if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC)) defaultenv_append_directory(defaultenv_<board>); This way we can make sure that the defaultenv-1 board specific bits are only compiled in when defaultenv-1 is actually in use. The next step is to make the defaultenv version selection a user visible choice. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* sizes.h: move include/sizes.h to include/linux/sizes.hMasahiro Yamada2015-01-081-1/+1
| | | | | | | | | | | | | | This file originates in Linux. Linux has it under include/linux/ directory since commit dccd2304cc90. Let's move it to the same place as well in barebox. This commit was generated by the following commands: find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:' git mv include/sizes.h include/linux/ Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* mtd: atmel_nand: retrieve ecc_mode from pdataRaphaël Poggi2014-09-021-0/+2
| | | | | | | | | By retrieving the ecc_mode from pdata we can use the same code for device tree and non device tree probing. Which was not possible before, because ecc_mode was arbitrarily set to NAND_ECC_SOFT. Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: remove armlinux_set_bootparams() calls from boardsSascha Hauer2014-01-061-1/+0
| | | | | | | As the place for the atags now is determined automatically the call from the boards can be removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/boardinfo'Sascha Hauer2013-09-051-0/+8
|\ | | | | | | | | | | | | Conflicts: arch/mips/boards/qemu-malta/init.c commands/bootm.c drivers/of/base.c
| * Set model and hostname at boardlevelSascha Hauer2013-08-161-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | With multiboard support the compiletime generated BOARDINFO string gets more and more meaningless. This removes it from Kconfig and replaces it with a variable that can be set at boardlevel. Also many boards have a standard setting for the hostname in the environment. This patch also moves the standard to C code by calling barebox_set_hostname(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: AT91: move iomux definitions to iomux.hSascha Hauer2013-08-161-0/+1
|/ | | | | | | mach/gpio.h is for the gpio API, so move unrelated stuff away. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: at91: move main clock define to CJean-Christophe PLAGNIOL-VILLARD2013-07-091-0/+7
| | | | | | | This will allow to drop the config.h and switch to multi board support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* macb: rename platform dataJosh Cartwright2013-04-031-1/+1
| | | | | | | | | | The macb/gem core is used by the Zynq SoC. In preparation of sharing the macb driver between at91 and Zynq, rename the platform data to 'struct macb_platform_data', and move the definition to a common location. Signed-off-by: Josh Cartwright <joshc@eso.teric.us> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/at91'Sascha Hauer2013-03-041-38/+24
|\
| * at91sam9260/9g20ek: use IS_ENABLED instead of #if/#ifdefFabio Porcedda2013-02-151-18/+13
| | | | | | | | | | | | | | | | | | | | | | Using IS_ENABLED instead of #if/#ifdef the compiler can check all the code. Using IS_ENABLED for configuring smc->mode is an optimization, reduce init.o text from 905 to 877. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * at91sam9260/9g20ek: enable clock via clock frameworkFabio Porcedda2013-02-111-2/+4
| | | | | | | | | | | | Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
| * at91sam9260/9g20ek: cleanup coding styleFabio Porcedda2013-02-111-18/+7
| | | | | | | | | | | | | | | | | | | | | | - fix some error and warnings pointed out by checkpatch. - join some short lines. - remove some empty lines. - remove unnecessary headers. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: at91: use -EINVAL for invalid gpio on atmel_mciFabio Porcedda2013-02-191-0/+2
|/ | | | | | Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* macb: allow to pass the phy interfaceJean-Christophe PLAGNIOL-VILLARD2013-01-291-1/+1
| | | | | | | as we will add later the GMAC IP verion support (GEM) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: SMC: switch to platform_driverJean-Christophe PLAGNIOL-VILLARD2013-01-071-2/+1
| | | | | | | This will allow to support multiple arch Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: pmc: drop AT91_BASE_SYSJean-Christophe PLAGNIOL-VILLARD2013-01-071-1/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: use -EINVAL for invalid gpioJean-Christophe PLAGNIOL-VILLARD2012-12-221-1/+2
| | | | | | | switch gpio type from u8 to int in the data struct Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* macb/ether: split flags for drivers and phylibJean-Christophe PLAGNIOL-VILLARD2012-11-191-1/+1
| | | | | | | | | as in the kernel use is_rmii flags for pinctrl phy_flags for phylib flags Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Treewide: remove address of the Free Software FoundationSascha Hauer2012-09-171-4/+0
| | | | | | | The FSF address has changed in the past. Instead of updating it each time the address changes, just drop it completely treewide. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: Calao and Atmel reboard sam{9260/9g20/9261/9g10/9263}ek autodetect ↵Jean-Christophe PLAGNIOL-VILLARD2012-08-031-1/+1
| | | | | | | sdram size Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Removed duplicate definition for DEVFS_PARTITION_xxxAlexander Shiyan2012-05-131-4/+4
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: at91: allow to pass the interface id to at91_add_device_ethJean-Christophe PLAGNIOL-VILLARD2012-04-021-1/+1
| | | | | | | On the sam9x5 series we now support 1 or 2 macb. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'pu/debug' into nextSascha Hauer2012-01-271-1/+2
|\
| * atmel/mci: fix slot_b supportJean-Christophe PLAGNIOL-VILLARD2012-01-161-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | in commit commit f60f6c58e atmel_mci: check for device id we use to address the right slot the driver use the dev_id to detect the slot which is wrong on 9263 as we have 2 devices with 2 slots use slot_b paramter to specify the slot as done in linux Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | at91sam9260/9g20ek: add led supportJean-Christophe PLAGNIOL-VILLARD2012-01-061-0/+32
| | | | | | | | | | | | | | use ds3 for heartbeat and ds5 for dfu Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | at91sam9260/9g20ek: add dfu and usb serial supportJean-Christophe PLAGNIOL-VILLARD2012-01-061-0/+2
|/ | | | | | | if bp3 is pressed 5s during boot enable dfu otherwise usbserial Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* atmel: reference boards and Caloa boards bbt option enabledJean-Christophe PLAGNIOL-VILLARD2012-01-021-0/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91sam9260/9g20-ek: add usb host, device and mci supportJean-Christophe PLAGNIOL-VILLARD2011-12-151-0/+46
| | | | | | | | | | | | configure BP4 and BP3 use BP4 to start DFU mode at boot if BP4 is pressed at boot time and maintain at least 5s the dfu is started otherwise we boot normaly Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91sam9260/9g20-ek: update nand supportJean-Christophe PLAGNIOL-VILLARD2011-12-151-6/+36
| | | | | | | | | | by default boot from nand with the bootstrap as first stage update the smc config for 9g20-ek switch to defaultenv Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* arm: at91: fix environment location in flash for multiple boardsThomas Petazzoni2011-10-141-1/+1
| | | | | | | | | The environment partition was overlapping the Barebox partition in those three Atmel boards. Saving the environment resulted in the Barebox being overwritten. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* introduce io.hSascha Hauer2011-09-221-1/+1
| | | | | | | To allow for some generic io accessors introduce io.h and use this instead of asm/io.h throughout the tree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: nand switch ecc base to resourceJean-Christophe PLAGNIOL-VILLARD2011-09-201-2/+0
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91/boards: switch to software ecc as in linux kernelJean-Christophe PLAGNIOL-VILLARD2011-09-201-1/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM boards: move sdram setup before mmu setupSascha Hauer2011-08-011-1/+8
| | | | | | | | | | | | The new MMU setup will need SDRAM base addresses and sizes. For this reason convert the MMU enabled ARM boards: - move mem setup to mem_initcall. This is early but still makes sure that we already have the console available - move MMU setup in this initcall temporary as after the mmu_init will generic Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.Jean-Christophe PLAGNIOL-VILLARD2010-09-201-1/+20
| | | | | | | | | | | | | | AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. We created a new board for this device but based the chip support directly on 9260 files with little updates. Here is the chip page on Atmel wabsite: http://atmel.com/dyn/products/product_card.asp?part_id=4337 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* arm: move mach-types.h to include/generated/Jean-Christophe PLAGNIOL-VILLARD2010-09-171-1/+1
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* move boards to arch/<architecure>/boardsJean-Christophe PLAGNIOL-VILLARD2010-07-231-0/+151
this will allow each arch to handle the boards more simply and depending on there need the env var BOARD will refer to the current board dirent for sandbox as we have only one board the board dirent is arch/sandbox/board Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-24 05:40:16 +0000