summaryrefslogtreecommitdiffstats
path: root/arch/arm/boards/at91sam9263ek
Commit message (Collapse)AuthorAgeFilesLines
* mtd: atmel_nand: retrieve ecc_mode from pdataRaphaël Poggi2014-09-021-0/+1
| | | | | | | | | By retrieving the ecc_mode from pdata we can use the same code for device tree and non device tree probing. Which was not possible before, because ecc_mode was arbitrarily set to NAND_ECC_SOFT. Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* env: Remove bogus USB vendor/product idsSascha Hauer2014-07-211-4/+1
| | | | | | | | Many boards use a USB vendor id of 0x4321. This doesn't exist and shouldn't be used. Remove this and also the bogus product id of 0x1234. The boards will use the barebox default vendor/product id then. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: remove armlinux_set_bootparams() calls from boardsSascha Hauer2014-01-061-1/+0
| | | | | | | As the place for the atags now is determined automatically the call from the boards can be removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: remove asm/hardware.hSascha Hauer2013-11-081-1/+1
| | | | | | | asm/hardware.h does not have any content except including mach/hardware.h. include mach/hardware.h directly where needed and get rid of asm/hardware.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/boardinfo'Sascha Hauer2013-09-051-0/+3
|\ | | | | | | | | | | | | Conflicts: arch/mips/boards/qemu-malta/init.c commands/bootm.c drivers/of/base.c
| * Set model and hostname at boardlevelSascha Hauer2013-08-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | With multiboard support the compiletime generated BOARDINFO string gets more and more meaningless. This removes it from Kconfig and replaces it with a variable that can be set at boardlevel. Also many boards have a standard setting for the hostname in the environment. This patch also moves the standard to C code by calling barebox_set_hostname(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: AT91: move iomux definitions to iomux.hSascha Hauer2013-08-161-0/+1
|/ | | | | | | mach/gpio.h is for the gpio API, so move unrelated stuff away. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: at91 boards: remove empty config.h filesJean-Christophe PLAGNIOL-VILLARD2013-07-091-4/+0
| | | | | | | | We just keep one on rm9200ek as I did not yet convert this SoC init to C struct and still use Macro. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: at91: move main clock define to CJean-Christophe PLAGNIOL-VILLARD2013-07-092-2/+7
| | | | | | | This will allow to drop the config.h and switch to multi board support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* macb: rename platform dataJosh Cartwright2013-04-031-1/+1
| | | | | | | | | | The macb/gem core is used by the Zynq SoC. In preparation of sharing the macb driver between at91 and Zynq, rename the platform data to 'struct macb_platform_data', and move the definition to a common location. Signed-off-by: Josh Cartwright <joshc@eso.teric.us> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* switch boards to lwl-yJean-Christophe PLAGNIOL-VILLARD2013-02-211-3/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM AT91: switch at91sam9 to barebox_arm_entry part1Sascha Hauer2013-02-041-2/+2
| | | | | | | | | This switches the at91sam926x, 9g10 and 9g20 over to barebox_arm_entry. For these SoCs we currently support reading back the memory size from the SDRAM controller, so all of these can have a common reset() function. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* macb: allow to pass the phy interfaceJean-Christophe PLAGNIOL-VILLARD2013-01-291-1/+1
| | | | | | | as we will add later the GMAC IP verion support (GEM) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91sam9263ek: add lcd supportJean-Christophe PLAGNIOL-VILLARD2013-01-282-1/+78
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: sam926x: switch lowlevel param to c codeJean-Christophe PLAGNIOL-VILLARD2013-01-223-87/+108
| | | | | | | Instead of hardcode define use a struct that the board fill Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: SMC: switch to platform_driverJean-Christophe PLAGNIOL-VILLARD2013-01-071-2/+1
| | | | | | | This will allow to support multiple arch Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: switch to gpiolibJean-Christophe PLAGNIOL-VILLARD2012-12-221-1/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: use -EINVAL for invalid gpioJean-Christophe PLAGNIOL-VILLARD2012-12-221-1/+1
| | | | | | | switch gpio type from u8 to int in the data struct Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* macb/ether: split flags for drivers and phylibJean-Christophe PLAGNIOL-VILLARD2012-11-191-1/+1
| | | | | | | | | as in the kernel use is_rmii flags for pinctrl phy_flags for phylib flags Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/remove-fsf-address'Sascha Hauer2012-10-031-4/+0
|\ | | | | | | | | | | Conflicts: drivers/net/miidev.c include/miidev.h
| * Treewide: remove address of the Free Software FoundationSascha Hauer2012-09-171-4/+0
| | | | | | | | | | | | | | The FSF address has changed in the past. Instead of updating it each time the address changes, just drop it completely treewide. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | dhcp: switch to global var supportJean-Christophe PLAGNIOL-VILLARD2012-10-021-1/+1
|/ | | | | | | | | | This way you can specify as previously set the dhcp parameter via global.dhcp.xxx and get the result via global.dhcp.xxx This is need for the defaultenv-2 to add the bootp suppport. Use it on defaultenv too to have only one set of var. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* at91: Calao and Atmel reboard sam{9260/9g20/9261/9g10/9263}ek autodetect ↵Jean-Christophe PLAGNIOL-VILLARD2012-08-031-1/+1
| | | | | | | sdram size Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Removed duplicate definition for DEVFS_PARTITION_xxxAlexander Shiyan2012-05-131-6/+6
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Atmel reference board: add oftree boot supportJean-Christophe PLAGNIOL-VILLARD2012-04-131-6/+8
| | | | | | | | | add oftree partition to store the dtb set the oftree location use a zImage by default now Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: at91: allow to pass the interface id to at91_add_device_ethJean-Christophe PLAGNIOL-VILLARD2012-04-021-1/+1
| | | | | | | On the sam9x5 series we now support 1 or 2 macb. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: set ip mode to dhcp-bareboxJean-Christophe PLAGNIOL-VILLARD2012-04-021-1/+1
| | | | | | | As the mainline kernel does not enable the bootp support by default Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: set dhcp vendor id on Atmel Reference boardJean-Christophe PLAGNIOL-VILLARD2012-03-171-0/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91sam9263ek: add dfu and usb serial supportJean-Christophe PLAGNIOL-VILLARD2012-03-122-0/+80
| | | | | | if left_click is pressed 5s during boot enable dfu otherwise usbserial Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* at91sam9263ek: add leds supportJean-Christophe PLAGNIOL-VILLARD2012-03-121-0/+31
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* at91sam9263ek: add runtime nor detectionJean-Christophe PLAGNIOL-VILLARD2012-03-122-12/+17
| | | | | | | | most of the board does not have a nor soldered update the nand partition table to boot from nand with bootstrap Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* at91sam9/lowlevel_init: allow to select the smc chipselectJean-Christophe PLAGNIOL-VILLARD2012-01-121-4/+5
| | | | | | | this will allow to configure the nand as example Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91sam9x: switch lowlevel init to cJean-Christophe PLAGNIOL-VILLARD2012-01-021-18/+0
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91sam9263ek: add nor partitionJean-Christophe PLAGNIOL-VILLARD2012-01-021-0/+2
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* atmel: reference boards and Caloa boards bbt option enabledJean-Christophe PLAGNIOL-VILLARD2012-01-021-0/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* defaultenv: simplify bootSascha Hauer2011-12-151-5/+0
| | | | | | | | Now that we have a bootm command which boots everything we can simplify the defaultenvironment. We can call bootm on every image type and can remove the kernelimage_type variables. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* arm: at91: fix environment location in flash for multiple boardsThomas Petazzoni2011-10-141-1/+1
| | | | | | | | | The environment partition was overlapping the Barebox partition in those three Atmel boards. Saving the environment resulted in the Barebox being overwritten. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* introduce io.hSascha Hauer2011-09-221-1/+1
| | | | | | | To allow for some generic io accessors introduce io.h and use this instead of asm/io.h throughout the tree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: nand switch ecc base to resourceJean-Christophe PLAGNIOL-VILLARD2011-09-201-2/+0
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91/boards: switch to software ecc as in linux kernelJean-Christophe PLAGNIOL-VILLARD2011-09-201-1/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM boards: move sdram setup before mmu setupSascha Hauer2011-08-011-1/+8
| | | | | | | | | | | | The new MMU setup will need SDRAM base addresses and sizes. For this reason convert the MMU enabled ARM boards: - move mem setup to mem_initcall. This is early but still makes sure that we already have the console available - move MMU setup in this initcall temporary as after the mmu_init will generic Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* resource: introduce add_cfi_device to register simple cfi deviceJean-Christophe PLAGNIOL-VILLARD2011-07-231-2/+1
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* at91: switch to add_generic_deviceJean-Christophe PLAGNIOL-VILLARD2011-07-221-16/+2
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* at91: add missing IORESOURCE_MEM flags to resourcesJean-Christophe PLAGNIOL-VILLARD2011-07-201-0/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: switch to all resource declaration to "struct resource"Jean-Christophe PLAGNIOL-VILLARD2011-07-181-2/+9
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* at91sam9263ek: fix env location and sizeJean-Christophe PLAGNIOL-VILLARD2011-07-171-1/+1
| | | | | | | | | | | 256k(barebox)ro,128k(bareboxenv),1536k(kernel),-(root) so we will match the erase block size Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91sam9263ek: add mci1 supportJean-Christophe PLAGNIOL-VILLARD2011-06-161-0/+16
| | | | | | enable fat support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Merge branch 'next'Sascha Hauer2011-04-041-2/+2
|\
| * defaultenv: add kernel_loc nfs and tftp supportJean-Christophe PLAGNIOL-VILLARD2011-03-141-2/+2
| | | | | | | | | | | | | | | | | | | | before we can only support tftp so keep it as default Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | at91: fix missing nand_device in board config in board that nandJean-Christophe PLAGNIOL-VILLARD2011-03-141-0/+1
|/ | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-26 09:28:15 +0000