summaryrefslogtreecommitdiffstats
path: root/arch/arm/boards/at91sam9263ek
Commit message (Collapse)AuthorAgeFilesLines
* defaultenv: add defaultenv-1 in boards via defaultenv_append_directory()Sascha Hauer2016-10-104-0/+5
| | | | | | | | | | | | | | | | | | | | Currently it's hardcoded for each board which defaultenv version is used. This is unfortunate since some people like the other defaultenv version better and may want to select it. This patch removes the board specific environment path CONFIG_DEFAULT_ENVIRONMENT_PATH and instead adds it via: if (IS_ENABLED(CONFIG_DEFAULT_ENVIRONMENT_GENERIC)) defaultenv_append_directory(defaultenv_<board>); This way we can make sure that the defaultenv-1 board specific bits are only compiled in when defaultenv-1 is actually in use. The next step is to make the defaultenv version selection a user visible choice. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* sizes.h: move include/sizes.h to include/linux/sizes.hMasahiro Yamada2015-01-081-1/+1
| | | | | | | | | | | | | | This file originates in Linux. Linux has it under include/linux/ directory since commit dccd2304cc90. Let's move it to the same place as well in barebox. This commit was generated by the following commands: find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:' git mv include/sizes.h include/linux/ Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* mtd: atmel_nand: retrieve ecc_mode from pdataRaphaël Poggi2014-09-021-0/+1
| | | | | | | | | By retrieving the ecc_mode from pdata we can use the same code for device tree and non device tree probing. Which was not possible before, because ecc_mode was arbitrarily set to NAND_ECC_SOFT. Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* env: Remove bogus USB vendor/product idsSascha Hauer2014-07-211-4/+1
| | | | | | | | Many boards use a USB vendor id of 0x4321. This doesn't exist and shouldn't be used. Remove this and also the bogus product id of 0x1234. The boards will use the barebox default vendor/product id then. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: remove armlinux_set_bootparams() calls from boardsSascha Hauer2014-01-061-1/+0
| | | | | | | As the place for the atags now is determined automatically the call from the boards can be removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: remove asm/hardware.hSascha Hauer2013-11-081-1/+1
| | | | | | | asm/hardware.h does not have any content except including mach/hardware.h. include mach/hardware.h directly where needed and get rid of asm/hardware.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/boardinfo'Sascha Hauer2013-09-051-0/+3
|\ | | | | | | | | | | | | Conflicts: arch/mips/boards/qemu-malta/init.c commands/bootm.c drivers/of/base.c
| * Set model and hostname at boardlevelSascha Hauer2013-08-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | With multiboard support the compiletime generated BOARDINFO string gets more and more meaningless. This removes it from Kconfig and replaces it with a variable that can be set at boardlevel. Also many boards have a standard setting for the hostname in the environment. This patch also moves the standard to C code by calling barebox_set_hostname(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | ARM: AT91: move iomux definitions to iomux.hSascha Hauer2013-08-161-0/+1
|/ | | | | | | mach/gpio.h is for the gpio API, so move unrelated stuff away. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: at91 boards: remove empty config.h filesJean-Christophe PLAGNIOL-VILLARD2013-07-091-4/+0
| | | | | | | | We just keep one on rm9200ek as I did not yet convert this SoC init to C struct and still use Macro. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: at91: move main clock define to CJean-Christophe PLAGNIOL-VILLARD2013-07-092-2/+7
| | | | | | | This will allow to drop the config.h and switch to multi board support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* macb: rename platform dataJosh Cartwright2013-04-031-1/+1
| | | | | | | | | | The macb/gem core is used by the Zynq SoC. In preparation of sharing the macb driver between at91 and Zynq, rename the platform data to 'struct macb_platform_data', and move the definition to a common location. Signed-off-by: Josh Cartwright <joshc@eso.teric.us> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* switch boards to lwl-yJean-Christophe PLAGNIOL-VILLARD2013-02-211-3/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM AT91: switch at91sam9 to barebox_arm_entry part1Sascha Hauer2013-02-041-2/+2
| | | | | | | | | This switches the at91sam926x, 9g10 and 9g20 over to barebox_arm_entry. For these SoCs we currently support reading back the memory size from the SDRAM controller, so all of these can have a common reset() function. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* macb: allow to pass the phy interfaceJean-Christophe PLAGNIOL-VILLARD2013-01-291-1/+1
| | | | | | | as we will add later the GMAC IP verion support (GEM) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91sam9263ek: add lcd supportJean-Christophe PLAGNIOL-VILLARD2013-01-282-1/+78
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: sam926x: switch lowlevel param to c codeJean-Christophe PLAGNIOL-VILLARD2013-01-223-87/+108
| | | | | | | Instead of hardcode define use a struct that the board fill Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: SMC: switch to platform_driverJean-Christophe PLAGNIOL-VILLARD2013-01-071-2/+1
| | | | | | | This will allow to support multiple arch Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: switch to gpiolibJean-Christophe PLAGNIOL-VILLARD2012-12-221-1/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: use -EINVAL for invalid gpioJean-Christophe PLAGNIOL-VILLARD2012-12-221-1/+1
| | | | | | | switch gpio type from u8 to int in the data struct Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* macb/ether: split flags for drivers and phylibJean-Christophe PLAGNIOL-VILLARD2012-11-191-1/+1
| | | | | | | | | as in the kernel use is_rmii flags for pinctrl phy_flags for phylib flags Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Merge branch 'for-next/remove-fsf-address'Sascha Hauer2012-10-031-4/+0
|\ | | | | | | | | | | Conflicts: drivers/net/miidev.c include/miidev.h
| * Treewide: remove address of the Free Software FoundationSascha Hauer2012-09-171-4/+0
| | | | | | | | | | | | | | The FSF address has changed in the past. Instead of updating it each time the address changes, just drop it completely treewide. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | dhcp: switch to global var supportJean-Christophe PLAGNIOL-VILLARD2012-10-021-1/+1
|/ | | | | | | | | | This way you can specify as previously set the dhcp parameter via global.dhcp.xxx and get the result via global.dhcp.xxx This is need for the defaultenv-2 to add the bootp suppport. Use it on defaultenv too to have only one set of var. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* at91: Calao and Atmel reboard sam{9260/9g20/9261/9g10/9263}ek autodetect ↵Jean-Christophe PLAGNIOL-VILLARD2012-08-031-1/+1
| | | | | | | sdram size Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Removed duplicate definition for DEVFS_PARTITION_xxxAlexander Shiyan2012-05-131-6/+6
| | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* Atmel reference board: add oftree boot supportJean-Christophe PLAGNIOL-VILLARD2012-04-131-6/+8
| | | | | | | | | add oftree partition to store the dtb set the oftree location use a zImage by default now Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM: at91: allow to pass the interface id to at91_add_device_ethJean-Christophe PLAGNIOL-VILLARD2012-04-021-1/+1
| | | | | | | On the sam9x5 series we now support 1 or 2 macb. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: set ip mode to dhcp-bareboxJean-Christophe PLAGNIOL-VILLARD2012-04-021-1/+1
| | | | | | | As the mainline kernel does not enable the bootp support by default Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: set dhcp vendor id on Atmel Reference boardJean-Christophe PLAGNIOL-VILLARD2012-03-171-0/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91sam9263ek: add dfu and usb serial supportJean-Christophe PLAGNIOL-VILLARD2012-03-122-0/+80
| | | | | | if left_click is pressed 5s during boot enable dfu otherwise usbserial Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* at91sam9263ek: add leds supportJean-Christophe PLAGNIOL-VILLARD2012-03-121-0/+31
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* at91sam9263ek: add runtime nor detectionJean-Christophe PLAGNIOL-VILLARD2012-03-122-12/+17
| | | | | | | | most of the board does not have a nor soldered update the nand partition table to boot from nand with bootstrap Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* at91sam9/lowlevel_init: allow to select the smc chipselectJean-Christophe PLAGNIOL-VILLARD2012-01-121-4/+5
| | | | | | | this will allow to configure the nand as example Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91sam9x: switch lowlevel init to cJean-Christophe PLAGNIOL-VILLARD2012-01-021-18/+0
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91sam9263ek: add nor partitionJean-Christophe PLAGNIOL-VILLARD2012-01-021-0/+2
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* atmel: reference boards and Caloa boards bbt option enabledJean-Christophe PLAGNIOL-VILLARD2012-01-021-0/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* defaultenv: simplify bootSascha Hauer2011-12-151-5/+0
| | | | | | | | Now that we have a bootm command which boots everything we can simplify the defaultenvironment. We can call bootm on every image type and can remove the kernelimage_type variables. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* arm: at91: fix environment location in flash for multiple boardsThomas Petazzoni2011-10-141-1/+1
| | | | | | | | | The environment partition was overlapping the Barebox partition in those three Atmel boards. Saving the environment resulted in the Barebox being overwritten. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* introduce io.hSascha Hauer2011-09-221-1/+1
| | | | | | | To allow for some generic io accessors introduce io.h and use this instead of asm/io.h throughout the tree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: nand switch ecc base to resourceJean-Christophe PLAGNIOL-VILLARD2011-09-201-2/+0
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91/boards: switch to software ecc as in linux kernelJean-Christophe PLAGNIOL-VILLARD2011-09-201-1/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* ARM boards: move sdram setup before mmu setupSascha Hauer2011-08-011-1/+8
| | | | | | | | | | | | The new MMU setup will need SDRAM base addresses and sizes. For this reason convert the MMU enabled ARM boards: - move mem setup to mem_initcall. This is early but still makes sure that we already have the console available - move MMU setup in this initcall temporary as after the mmu_init will generic Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* resource: introduce add_cfi_device to register simple cfi deviceJean-Christophe PLAGNIOL-VILLARD2011-07-231-2/+1
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* at91: switch to add_generic_deviceJean-Christophe PLAGNIOL-VILLARD2011-07-221-16/+2
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* at91: add missing IORESOURCE_MEM flags to resourcesJean-Christophe PLAGNIOL-VILLARD2011-07-201-0/+1
| | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91: switch to all resource declaration to "struct resource"Jean-Christophe PLAGNIOL-VILLARD2011-07-181-2/+9
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* at91sam9263ek: fix env location and sizeJean-Christophe PLAGNIOL-VILLARD2011-07-171-1/+1
| | | | | | | | | | | 256k(barebox)ro,128k(bareboxenv),1536k(kernel),-(root) so we will match the erase block size Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* at91sam9263ek: add mci1 supportJean-Christophe PLAGNIOL-VILLARD2011-06-161-0/+16
| | | | | | enable fat support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* Merge branch 'next'Sascha Hauer2011-04-041-2/+2
|\
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-27 23:39:43 +0000